diff options
Diffstat (limited to 'target')
14 files changed, 788 insertions, 0 deletions
diff --git a/target/linux/ramips/patches-3.8/001-mips-add-cp0-compare-irq-function.patch b/target/linux/ramips/patches-3.8/001-mips-add-cp0-compare-irq-function.patch new file mode 100644 index 0000000000..d7678615bc --- /dev/null +++ b/target/linux/ramips/patches-3.8/001-mips-add-cp0-compare-irq-function.patch @@ -0,0 +1,29 @@ +--- a/arch/mips/kernel/traps.c ++++ b/arch/mips/kernel/traps.c +@@ -55,6 +55,7 @@ + #include <asm/types.h> + #include <asm/stacktrace.h> + #include <asm/uasm.h> ++#include <asm/time.h> + + extern void check_wait(void); + extern asmlinkage void r4k_wait(void); +@@ -1617,6 +1618,8 @@ void __cpuinit per_cpu_trap_init(bool is + if (cpu_has_mips_r2) { + cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP; + cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7; ++ if (get_c0_compare_irq) ++ cp0_compare_irq = get_c0_compare_irq(); + cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7; + if (cp0_perfcount_irq == cp0_compare_irq) + cp0_perfcount_irq = -1; +--- a/arch/mips/include/asm/time.h ++++ b/arch/mips/include/asm/time.h +@@ -51,6 +51,7 @@ extern int (*perf_irq)(void); + * Initialize the calling CPU's compare interrupt as clockevent device + */ + extern unsigned int __weak get_c0_compare_int(void); ++extern unsigned int __weak get_c0_compare_irq(void); + extern int r4k_clockevent_init(void); + + static inline int mips_clockevent_init(void) diff --git a/target/linux/ramips/patches-3.8/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch b/target/linux/ramips/patches-3.8/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch new file mode 100644 index 0000000000..91b887f922 --- /dev/null +++ b/target/linux/ramips/patches-3.8/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch @@ -0,0 +1,20 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -1939,7 +1939,7 @@ static int __xipram do_erase_chip(struct + chip->erase_suspended = 0; + } + +- if (chip_ready(map, adr)) ++ if (chip_good(map, adr, map_word_ff(map))) + break; + + if (time_after(jiffies, timeo)) { +@@ -2028,7 +2028,7 @@ static int __xipram do_erase_oneblock(st + chip->erase_suspended = 0; + } + +- if (chip_ready(map, adr)) { ++ if (chip_good(map, adr, map_word_ff(map))) { + xip_enable(map, chip, adr); + break; + } diff --git a/target/linux/ramips/patches-3.8/011-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ramips/patches-3.8/011-mtd-cfi_cmdset_0002-force-word-write.patch new file mode 100644 index 0000000000..25ae351e65 --- /dev/null +++ b/target/linux/ramips/patches-3.8/011-mtd-cfi_cmdset_0002-force-word-write.patch @@ -0,0 +1,61 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -39,7 +39,7 @@ + #include <linux/mtd/xip.h> + + #define AMD_BOOTLOC_BUG +-#define FORCE_WORD_WRITE 0 ++#define FORCE_WORD_WRITE 1 + + #define MAX_WORD_RETRIES 3 + +@@ -50,7 +50,9 @@ + + static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); + static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#if !FORCE_WORD_WRITE + static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#endif + static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); + static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); + static void cfi_amdstd_sync (struct mtd_info *); +@@ -186,6 +188,7 @@ static void fixup_amd_bootblock(struct m + } + #endif + ++#if !FORCE_WORD_WRITE + static void fixup_use_write_buffers(struct mtd_info *mtd) + { + struct map_info *map = mtd->priv; +@@ -195,6 +198,7 @@ static void fixup_use_write_buffers(stru + mtd->_write = cfi_amdstd_write_buffers; + } + } ++#endif /* !FORCE_WORD_WRITE */ + + /* Atmel chips don't use the same PRI format as AMD chips */ + static void fixup_convert_atmel_pri(struct mtd_info *mtd) +@@ -1443,6 +1447,7 @@ static int cfi_amdstd_write_words(struct + /* + * FIXME: interleaved mode not tested, and probably not supported! + */ ++#if !FORCE_WORD_WRITE + static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, + unsigned long adr, const u_char *buf, + int len) +@@ -1567,7 +1572,6 @@ static int __xipram do_write_buffer(stru + return ret; + } + +- + static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) + { +@@ -1642,6 +1646,7 @@ static int cfi_amdstd_write_buffers(stru + + return 0; + } ++#endif /* !FORCE_WORD_WRITE */ + + /* + * Wait for the flash chip to become ready to write data diff --git a/target/linux/ramips/patches-3.8/100-mips-ralink-core.patch b/target/linux/ramips/patches-3.8/100-mips-ralink-core.patch new file mode 100644 index 0000000000..e2d8987211 --- /dev/null +++ b/target/linux/ramips/patches-3.8/100-mips-ralink-core.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -104,6 +104,9 @@ config ATH79 + help + Support for the Atheros AR71XX/AR724X/AR913X SoCs. + ++config MIPS_RALINK ++ bool "Ralink MIPS SoC based boards" ++ + config BCM47XX + bool "Broadcom BCM47XX based boards" + select ARCH_WANT_OPTIONAL_GPIOLIB +@@ -845,6 +848,7 @@ source "arch/mips/jz4740/Kconfig" + source "arch/mips/lantiq/Kconfig" + source "arch/mips/lasat/Kconfig" + source "arch/mips/pmc-sierra/Kconfig" ++source "arch/mips/ralink/Kconfig" + source "arch/mips/powertv/Kconfig" + source "arch/mips/sgi-ip27/Kconfig" + source "arch/mips/sibyte/Kconfig" +@@ -1172,7 +1176,7 @@ config BOOT_ELF32 + + config MIPS_L1_CACHE_SHIFT + int +- default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL ++ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL || RALINK_RT288X + default "6" if MIPS_CPU_SCACHE + default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON + default "5" +--- a/arch/mips/Kbuild.platforms ++++ b/arch/mips/Kbuild.platforms +@@ -22,6 +22,7 @@ platforms += pmc-sierra + platforms += pnx833x + platforms += pnx8550 + platforms += powertv ++platforms += ralink + platforms += rb532 + platforms += sgi-ip22 + platforms += sgi-ip27 diff --git a/target/linux/ramips/patches-3.8/101-rt288x_serial_driver_hack.patch b/target/linux/ramips/patches-3.8/101-rt288x_serial_driver_hack.patch new file mode 100644 index 0000000000..e54c100406 --- /dev/null +++ b/target/linux/ramips/patches-3.8/101-rt288x_serial_driver_hack.patch @@ -0,0 +1,89 @@ +--- a/drivers/tty/serial/8250/Kconfig ++++ b/drivers/tty/serial/8250/Kconfig +@@ -249,6 +249,14 @@ config SERIAL_8250_ACORN + system, say Y to this option. The driver can handle 1, 2, or 3 port + cards. If unsure, say N. + ++config SERIAL_8250_RT288X ++ bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support" ++ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883) ++ help ++ If you have a Ralink RT288x/RT305x SoC based board and want to use the ++ serial port, say Y to this option. The driver can handle up to 2 serial ++ ports. If unsure, say N. ++ + config SERIAL_8250_RM9K + bool "Support for MIPS RM9xxx integrated serial port" + depends on SERIAL_8250 != n && SERIAL_RM9000 +--- a/include/linux/serial_core.h ++++ b/include/linux/serial_core.h +@@ -134,7 +134,7 @@ struct uart_port { + #define UPIO_HUB6 (1) + #define UPIO_MEM (2) + #define UPIO_MEM32 (3) +-#define UPIO_AU (4) /* Au1x00 type IO */ ++#define UPIO_AU (4) /* Au1x00 and RT288x type IO */ + #define UPIO_TSI (5) /* Tsi108/109 type IO */ + #define UPIO_RM9000 (6) /* RM9000 type IO */ + +--- a/drivers/tty/serial/8250/8250.c ++++ b/drivers/tty/serial/8250/8250.c +@@ -324,9 +324,9 @@ static void default_serial_dl_write(stru + serial_out(up, UART_DLM, value >> 8 & 0xff); + } + +-#ifdef CONFIG_MIPS_ALCHEMY ++#if defined CONFIG_MIPS_ALCHEMY || defined (CONFIG_SERIAL_8250_RT288X) + +-/* Au1x00 UART hardware has a weird register layout */ ++/* Au1x00 and RT288x UART hardware has a weird register layout */ + static const u8 au_io_in_map[] = { + [UART_RX] = 0, + [UART_IER] = 2, +@@ -506,7 +506,7 @@ static void set_io_from_upio(struct uart + break; + #endif + +-#ifdef CONFIG_MIPS_ALCHEMY ++#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X) + case UPIO_AU: + p->serial_in = au_serial_in; + p->serial_out = au_serial_out; +@@ -731,22 +731,19 @@ static int size_fifo(struct uart_8250_po + */ + static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p) + { +- unsigned char old_dll, old_dlm, old_lcr; ++ unsigned char old_lcr; ++ unsigned int old_dl; + unsigned int id; + + old_lcr = serial_in(p, UART_LCR); + serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A); + +- old_dll = serial_in(p, UART_DLL); +- old_dlm = serial_in(p, UART_DLM); ++ old_dl = serial_dl_read(p); + +- serial_out(p, UART_DLL, 0); +- serial_out(p, UART_DLM, 0); ++ serial_dl_write(p, 0); ++ id = serial_dl_read(p); + +- id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8; +- +- serial_out(p, UART_DLL, old_dll); +- serial_out(p, UART_DLM, old_dlm); ++ serial_dl_write(p, old_dl); + serial_out(p, UART_LCR, old_lcr); + + return id; +@@ -872,7 +869,7 @@ static int broken_efr(struct uart_8250_p + /* + * Exar ST16C2550 "A2" devices incorrectly detect as + * having an EFR, and report an ID of 0x0201. See +- * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html ++ * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html + */ + if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) + return 1; diff --git a/target/linux/ramips/patches-3.8/102-rt288x-pci-driver-hook.patch b/target/linux/ramips/patches-3.8/102-rt288x-pci-driver-hook.patch new file mode 100644 index 0000000000..a76603f144 --- /dev/null +++ b/target/linux/ramips/patches-3.8/102-rt288x-pci-driver-hook.patch @@ -0,0 +1,10 @@ +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -21,6 +21,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o + obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o + obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o + obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o ++obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o + + # + # These are still pretty much in the old state, watch, go blind. diff --git a/target/linux/ramips/patches-3.8/103-ethernet.patch b/target/linux/ramips/patches-3.8/103-ethernet.patch new file mode 100644 index 0000000000..5909cf28e1 --- /dev/null +++ b/target/linux/ramips/patches-3.8/103-ethernet.patch @@ -0,0 +1,20 @@ +--- a/drivers/net/ethernet/Kconfig ++++ b/drivers/net/ethernet/Kconfig +@@ -136,6 +136,7 @@ source "drivers/net/ethernet/packetengin + source "drivers/net/ethernet/pasemi/Kconfig" + source "drivers/net/ethernet/qlogic/Kconfig" + source "drivers/net/ethernet/racal/Kconfig" ++source "drivers/net/ethernet/ramips/Kconfig" + source "drivers/net/ethernet/realtek/Kconfig" + source "drivers/net/ethernet/renesas/Kconfig" + source "drivers/net/ethernet/rdc/Kconfig" +--- a/drivers/net/ethernet/Makefile ++++ b/drivers/net/ethernet/Makefile +@@ -54,6 +54,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe + obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/ + obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ + obj-$(CONFIG_NET_VENDOR_RACAL) += racal/ ++obj-$(CONFIG_NET_RAMIPS) += ramips/ + obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ + obj-$(CONFIG_SH_ETH) += renesas/ + obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ diff --git a/target/linux/ramips/patches-3.8/104-ramips-watchdog-driver.patch b/target/linux/ramips/patches-3.8/104-ramips-watchdog-driver.patch new file mode 100644 index 0000000000..69ee00474b --- /dev/null +++ b/target/linux/ramips/patches-3.8/104-ramips-watchdog-driver.patch @@ -0,0 +1,26 @@ +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -1076,6 +1076,13 @@ config LANTIQ_WDT + help + Hardware driver for the Lantiq SoC Watchdog Timer. + ++config RAMIPS_WDT ++ tristate "Ralink RT288X/RT305X Watchdog Timer" ++ depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883) ++ help ++ Hardware driver for the built-in watchdog timer on the ++ Ralink RT288X/RT305X SoCs. ++ + # PARISC Architecture + + # POWERPC Architecture +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -132,6 +132,7 @@ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o + obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o + octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o + obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o ++obj-$(CONFIG_RAMIPS_WDT) += ramips_wdt.o + + # PARISC Architecture + diff --git a/target/linux/ramips/patches-3.8/105-ramips-spi-driver.patch b/target/linux/ramips/patches-3.8/105-ramips-spi-driver.patch new file mode 100644 index 0000000000..7665ab4b9d --- /dev/null +++ b/target/linux/ramips/patches-3.8/105-ramips-spi-driver.patch @@ -0,0 +1,25 @@ +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -324,6 +324,12 @@ config SPI_RSPI + help + SPI driver for Renesas RSPI blocks. + ++config SPI_RAMIPS ++ tristate "Ralink RT288x/RT305x/RT3662 SPI Controller" ++ depends on (SOC_RT288X || SOC_RT305X || SOC_RT3883) ++ help ++ This selects a driver for the Ralink RT288x/RT305x SPI Controller. ++ + config SPI_S3C24XX + tristate "Samsung S3C24XX series SPI" + depends on ARCH_S3C24XX && EXPERIMENTAL +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -50,6 +50,7 @@ obj-$(CONFIG_SPI_PL022) += spi-pl022.o + obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o + obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx.o + obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o ++obj-$(CONFIG_SPI_RAMIPS) += spi-ramips.o + obj-$(CONFIG_SPI_RSPI) += spi-rspi.o + obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o + spi-s3c24xx-hw-y := spi-s3c24xx.o diff --git a/target/linux/ramips/patches-3.8/105-usb_dwc_otg.patch b/target/linux/ramips/patches-3.8/105-usb_dwc_otg.patch new file mode 100644 index 0000000000..88c211569b --- /dev/null +++ b/target/linux/ramips/patches-3.8/105-usb_dwc_otg.patch @@ -0,0 +1,20 @@ +--- a/drivers/usb/Kconfig ++++ b/drivers/usb/Kconfig +@@ -188,4 +188,6 @@ source "drivers/usb/gadget/Kconfig" + + source "drivers/usb/otg/Kconfig" + ++source "drivers/usb/dwc_otg/Kconfig" ++ + endif # USB_SUPPORT +--- a/drivers/usb/Makefile ++++ b/drivers/usb/Makefile +@@ -52,6 +52,8 @@ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early + obj-$(CONFIG_USB_ATM) += atm/ + obj-$(CONFIG_USB_SPEEDTOUCH) += atm/ + ++obj-$(CONFIG_DWC_OTG) += dwc_otg/ ++ + obj-$(CONFIG_USB_MUSB_HDRC) += musb/ + obj-$(CONFIG_USB_CHIPIDEA) += chipidea/ + obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/ diff --git a/target/linux/ramips/patches-3.8/106-rt3883-pci-support.patch b/target/linux/ramips/patches-3.8/106-rt3883-pci-support.patch new file mode 100644 index 0000000000..9f5ef9f73f --- /dev/null +++ b/target/linux/ramips/patches-3.8/106-rt3883-pci-support.patch @@ -0,0 +1,10 @@ +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -22,6 +22,7 @@ obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchem + obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o + obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o + obj-$(CONFIG_SOC_RT288X) += pci-rt288x.o ++obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o + + # + # These are still pretty much in the old state, watch, go blind. diff --git a/target/linux/ramips/rt288x/config-3.8 b/target/linux/ramips/rt288x/config-3.8 new file mode 100644 index 0000000000..ab705e0068 --- /dev/null +++ b/target/linux/ramips/rt288x/config-3.8 @@ -0,0 +1,133 @@ +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_GENERIC_HARDIRQS=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_WORK=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=m +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IP17XX_PHY=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_MDIO_BOARDINFO=y +# CONFIG_MII is not set +CONFIG_MIPS=y +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=4 +CONFIG_MIPS_MACHINE=y +CONFIG_MIPS_MT_DISABLED=y +CONFIG_MIPS_RALINK=y +# CONFIG_MIPS_SEAD3 is not set +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_RAMIPS=y +# CONFIG_NET_RAMIPS_DEBUG is not set +# CONFIG_NET_RAMIPS_DEBUG_FS is not set +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PERCPU_RWSEM=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_RALINK_DEV_GPIO_BUTTONS=y +CONFIG_RALINK_DEV_GPIO_LEDS=y +CONFIG_RALINK_RT288X=y +# CONFIG_RALINK_RT305X is not set +# CONFIG_RALINK_RT3883 is not set +CONFIG_RAMIPS_WDT=y +CONFIG_RT288X_MACH_BR6524N=y +CONFIG_RT288X_MACH_F5D8235_V1=y +CONFIG_RT288X_MACH_RT_N15=y +CONFIG_RT288X_MACH_V11ST_FE=y +CONFIG_RT288X_MACH_WLI_TX4_AG300N=y +CONFIG_RT288X_MACH_WZR_AGL300NH=y +CONFIG_RTL8366S_PHY=y +CONFIG_RTL8366_SMI=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RT288X=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SOC_RT288X=y +CONFIG_SWCONFIG=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_UIDGID_CONVERTED=y +CONFIG_USB_ARCH_HAS_XHCI=y +CONFIG_USB_SUPPORT=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ramips/rt305x/config-3.8 b/target/linux/ramips/rt305x/config-3.8 new file mode 100644 index 0000000000..64fac151eb --- /dev/null +++ b/target/linux/ramips/rt305x/config-3.8 @@ -0,0 +1,166 @@ +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DMA_NONCOHERENT=y +# CONFIG_DWC_OTG is not set +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_GENERIC_HARDIRQS=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_WORK=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HW_RANDOM=m +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQ_CPU=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_M25PXX_USE_FAST_READ=y +CONFIG_MDIO_BOARDINFO=y +# CONFIG_MII is not set +CONFIG_MIPS=y +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +CONFIG_MIPS_MT_DISABLED=y +CONFIG_MIPS_RALINK=y +# CONFIG_MIPS_SEAD3 is not set +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_PHYSMAP=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_RAMIPS=y +# CONFIG_NET_RAMIPS_DEBUG is not set +# CONFIG_NET_RAMIPS_DEBUG_FS is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PERCPU_RWSEM=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_RALINK_DEV_GPIO_BUTTONS=y +CONFIG_RALINK_DEV_GPIO_LEDS=y +# CONFIG_RALINK_RT288X is not set +CONFIG_RALINK_RT305X=y +# CONFIG_RALINK_RT3883 is not set +CONFIG_RAMIPS_WDT=y +CONFIG_RT305X_MACH_3G300M=y +CONFIG_RT305X_MACH_3G_6200N=y +CONFIG_RT305X_MACH_AIR3GII=y +CONFIG_RT305X_MACH_ALL0256N=y +CONFIG_RT305X_MACH_ALL5002=y +CONFIG_RT305X_MACH_ARGUS_ATP52B=y +CONFIG_RT305X_MACH_BC2=y +CONFIG_RT305X_MACH_BR6425=y +CONFIG_RT305X_MACH_BROADWAY=y +CONFIG_RT305X_MACH_CARAMBOLA=y +CONFIG_RT305X_MACH_DAP_1350=y +CONFIG_RT305X_MACH_DIR_300_REVB=y +CONFIG_RT305X_MACH_DIR_615_H1=y +CONFIG_RT305X_MACH_ESR_9753=y +CONFIG_RT305X_MACH_F5D8235_V2=y +CONFIG_RT305X_MACH_FONERA20N=y +CONFIG_RT305X_MACH_FREESTATION5=y +CONFIG_RT305X_MACH_HW550_3G=y +CONFIG_RT305X_MACH_MOFI3500_3GN=y +CONFIG_RT305X_MACH_MZKW300NH2=y +CONFIG_RT305X_MACH_NBG_419N=y +CONFIG_RT305X_MACH_NW718=y +CONFIG_RT305X_MACH_OMNI_EMB=y +CONFIG_RT305X_MACH_PSR_680W=y +CONFIG_RT305X_MACH_PWH2004=y +CONFIG_RT305X_MACH_RT_G32_REVB=y +CONFIG_RT305X_MACH_RT_N10_PLUS=y +CONFIG_RT305X_MACH_RT_N13U=y +CONFIG_RT305X_MACH_SL_R7205=y +CONFIG_RT305X_MACH_UR_336UN=y +CONFIG_RT305X_MACH_V22RW_2X2=y +CONFIG_RT305X_MACH_W306R_V20=y +CONFIG_RT305X_MACH_W502U=y +CONFIG_RT305X_MACH_WCR150GN=y +CONFIG_RT305X_MACH_WHR_G300N=y +CONFIG_RT305X_MACH_WL341V3=y +CONFIG_RT305X_MACH_WL351=y +CONFIG_RT305X_MACH_WL_330N=y +CONFIG_RT305X_MACH_WL_330N3G=y +CONFIG_RT305X_MACH_WR512_3GN=y +CONFIG_RT305X_MACH_WR6202=y +CONFIG_RT305X_MACH_XDX_RN502J=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RT288X=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SOC_RT305X=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_RAMIPS=y +CONFIG_SWCONFIG=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_UIDGID_CONVERTED=y +# CONFIG_USB_ARCH_HAS_XHCI is not set +CONFIG_USB_SUPPORT=y +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ramips/rt3883/config-3.8 b/target/linux/ramips/rt3883/config-3.8 new file mode 100644 index 0000000000..5adcbaa344 --- /dev/null +++ b/target/linux/ramips/rt3883/config-3.8 @@ -0,0 +1,140 @@ +CONFIG_AR8216_PHY=y +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_GENERIC_HARDIRQS=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_WORK=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=m +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQ_CPU=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_M25PXX_USE_FAST_READ=y +CONFIG_MDIO_BOARDINFO=y +# CONFIG_MII is not set +CONFIG_MIPS=y +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +CONFIG_MIPS_MACHINE=y +CONFIG_MIPS_MT_DISABLED=y +CONFIG_MIPS_RALINK=y +# CONFIG_MIPS_SEAD3 is not set +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_PHYSMAP=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_RAMIPS=y +# CONFIG_NET_RAMIPS_DEBUG is not set +# CONFIG_NET_RAMIPS_DEBUG_FS is not set +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PERCPU_RWSEM=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_RALINK_DEV_GPIO_BUTTONS=y +CONFIG_RALINK_DEV_GPIO_LEDS=y +# CONFIG_RALINK_RT288X is not set +# CONFIG_RALINK_RT305X is not set +CONFIG_RALINK_RT3883=y +CONFIG_RAMIPS_WDT=y +CONFIG_RT3883_MACH_DIR_645=y +CONFIG_RT3883_MACH_OMNI_EMB_HPM=y +CONFIG_RT3883_MACH_RT_N56U=y +CONFIG_RT3883_MACH_TEW_691GR=y +CONFIG_RT3883_MACH_TEW_692GR=y +CONFIG_RTL8366_SMI=y +CONFIG_RTL8367B_PHY=y +CONFIG_RTL8367_PHY=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RT288X=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SOC_RT3883=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_RAMIPS=y +CONFIG_SWCONFIG=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_UIDGID_CONVERTED=y +CONFIG_USB_ARCH_HAS_XHCI=y +CONFIG_USB_SUPPORT=y +CONFIG_WATCHDOG_CORE=y +CONFIG_ZONE_DMA_FLAG=0 |