aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds6
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.91
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt9
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c9
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c242
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/generic/config-default1
-rw-r--r--target/linux/ar71xx/image/generic.mk27
14 files changed, 300 insertions, 6 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 906c4b715f..52f1ac3ecf 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -372,6 +372,12 @@ epg5000)
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan-2g" "phy1tpt"
ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan-5g" "phy0tpt"
;;
+fritz4020)
+ ucidef_set_led_default "power" "Power" "$board:green:power" "1"
+ ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
+ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+ ;;
gl-ar300m)
ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
;;
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index cbbcf53946..5898261b3d 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -243,6 +243,7 @@ ar71xx_setup_interfaces()
;;
archer-c58-v1|\
archer-c59-v1|\
+ fritz4020|\
rb-450g)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 41ab43f7cb..6eb946468d 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -75,6 +75,9 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "art" 4096 2048
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0) +1)
;;
+ fritz4020)
+ ath9k_eeprom_extract_reverse "urlader" 5441 1088
+ ;;
mr18)
. /lib/upgrade/nand.sh
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 95314a2881..42bd80d9ad 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -709,6 +709,9 @@ ar71xx_board_detect() {
*"eTactica EG-200")
name="rme-eg200"
;;
+ *"FRITZ!Box 4020")
+ name="fritz4020"
+ ;;
*"FRITZ!WLAN Repeater 300E")
name="fritz300e"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 702d97a8ed..284582fa2b 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -686,6 +686,7 @@ platform_check_image() {
;;
# these boards use metadata images
fritz300e|\
+ fritz4020|\
rb-750-r2|\
rb-750p-pbr2|\
rb-750up-r2|\
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
index 5cea1b7bde..35efd1710b 100644
--- a/target/linux/ar71xx/config-4.9
+++ b/target/linux/ar71xx/config-4.9
@@ -115,6 +115,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_EW_DORIN is not set
# CONFIG_ATH79_MACH_F9K1115V2 is not set
# CONFIG_ATH79_MACH_FRITZ300E is not set
+# CONFIG_ATH79_MACH_FRITZ4020 is not set
# CONFIG_ATH79_MACH_GL_AR150 is not set
# CONFIG_ATH79_MACH_GL_AR300 is not set
# CONFIG_ATH79_MACH_GL_AR300M is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 4a032f6021..40d33b53fa 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -2347,3 +2347,12 @@ config ATH79_MACH_FRITZ300E
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
+
+config ATH79_MACH_FRITZ4020
+ bool "AVM FRITZ!Box 4020 support"
+ select SOC_QCA956X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_USB
+ select ATH79_DEV_M25P80
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index e606e2c3df..2124ab70c9 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -125,6 +125,7 @@ obj-$(CONFIG_ATH79_MACH_EW_BALIN) += mach-ew-balin.o
obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o
+obj-$(CONFIG_ATH79_MACH_FRITZ4020) += mach-fritz4020.o
obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o
obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o
obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
index 9e72c41a42..b46bab7886 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
@@ -1175,6 +1175,15 @@ void __init ath79_parse_ascii_mac(char *mac_str, u8 *mac)
}
}
+void __init ath79_extract_mac_reverse(u8 *ptr, u8 *out)
+{
+ int i;
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ out[i] = ptr[ETH_ALEN-i-1];
+ }
+}
+
static void __init ath79_set_mac_base_ascii(char *str)
{
u8 mac[ETH_ALEN];
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
index fb9e4f63c6..4d78260fbe 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
@@ -18,6 +18,7 @@ struct platform_device;
extern unsigned char ath79_mac_base[] __initdata;
void ath79_parse_ascii_mac(char *mac_str, u8 *mac);
+void ath79_extract_mac_reverse(u8 *ptr, u8 *out);
void ath79_init_mac(unsigned char *dst, const unsigned char *src,
int offset);
void ath79_init_local_mac(unsigned char *dst, const unsigned char *src);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c
new file mode 100644
index 0000000000..ed7f9a8b3e
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c
@@ -0,0 +1,242 @@
+/*
+ * AVM FRITZ!Box 4020 board support
+ *
+ * Copyright (C) 2018 David Bauer <mail@david-bauer.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/ath9k_platform.h>
+#include <linux/etherdevice.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_data/mdio-gpio.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+
+#define FRITZ4020_GPIO_SHIFT_SER 19 /* DS, Data Serial Input */
+#define FRITZ4020_GPIO_SHIFT_SRCLK 20 /* SHCP, Shift Reg Clock Input */
+
+#define FRITZ4020_SSR_BIT_0 0
+#define FRITZ4020_SSR_BIT_1 1
+#define FRITZ4020_SSR_BIT_2 2
+#define FRITZ4020_SSR_BIT_3 3
+#define FRITZ4020_SSR_BIT_4 4
+#define FRITZ4020_SSR_BIT_5 5
+#define FRITZ4020_SSR_BIT_6 6
+#define FRITZ4020_SSR_BIT_7 7
+
+#define FRITZ4020_74HC_GPIO_BASE 32
+#define FRITZ4020_74HC_GPIO_LED_LAN (FRITZ4020_74HC_GPIO_BASE + 0)
+#define FRITZ4020_74HC_GPIO_LED_INFO_RED (FRITZ4020_74HC_GPIO_BASE + 1)
+#define FRITZ4020_74HC_GPIO_LED_POWER (FRITZ4020_74HC_GPIO_BASE + 2)
+#define FRITZ4020_74HC_GPIO_LED_WLAN (FRITZ4020_74HC_GPIO_BASE + 3)
+#define FRITZ4020_74HC_GPIO_LED_WAN (FRITZ4020_74HC_GPIO_BASE + 4)
+#define FRITZ4020_74HC_GPIO_USB_RST (FRITZ4020_74HC_GPIO_BASE + 5)
+#define FRITZ4020_74HC_GPIO_LED_INFO (FRITZ4020_74HC_GPIO_BASE + 6)
+
+
+#define FRITZ4020_GPIO_BTN_WPS 2
+#define FRITZ4020_GPIO_BTN_WLAN 21
+#define FRITZ4020_KEYS_POLL_INTERVAL 20 /* msecs */
+#define FRITZ4020_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ4020_KEYS_POLL_INTERVAL)
+
+#define FRTIZ4020_OFFSET_URLADER_WIFI_MAC_REVERSE 0x1979
+
+
+static struct spi_gpio_platform_data fritz4020_spi_data = {
+ .sck = FRITZ4020_GPIO_SHIFT_SRCLK,
+ .miso = SPI_GPIO_NO_MISO,
+ .mosi = FRITZ4020_GPIO_SHIFT_SER,
+ .num_chipselect = 1,
+};
+
+static u8 fritz4020_ssr_initdata[] = {
+ BIT(FRITZ4020_SSR_BIT_7) |
+ BIT(FRITZ4020_SSR_BIT_6) |
+ BIT(FRITZ4020_SSR_BIT_5) |
+ BIT(FRITZ4020_SSR_BIT_4) |
+ BIT(FRITZ4020_SSR_BIT_3) |
+ BIT(FRITZ4020_SSR_BIT_2) |
+ BIT(FRITZ4020_SSR_BIT_1)
+};
+
+static struct gen_74x164_chip_platform_data fritz4020_ssr_data = {
+ .base = FRITZ4020_74HC_GPIO_BASE,
+ .num_registers = ARRAY_SIZE(fritz4020_ssr_initdata),
+ .init_data = fritz4020_ssr_initdata,
+};
+
+static struct platform_device fritz4020_spi_device = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &fritz4020_spi_data,
+ },
+};
+
+static struct spi_board_info fritz4020_spi_info[] = {
+ {
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 10000000,
+ .modalias = "74x164",
+ .platform_data = &fritz4020_ssr_data,
+ .controller_data = (void *) 0x0,
+ },
+};
+
+static struct mtd_partition fritz4020_flash_partitions[] = {
+ {
+ .name = "urlader",
+ .offset = 0,
+ .size = 0x0020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x0020000,
+ .size = 0x0EE0000,
+ }, {
+ .name = "tffs (1)",
+ .offset = 0x0f00000,
+ .size = 0x0080000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "tffs (2)",
+ .offset = 0x0f80000,
+ .size = 0x0080000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data fritz4020_flash_data = {
+ .parts = fritz4020_flash_partitions,
+ .nr_parts = ARRAY_SIZE(fritz4020_flash_partitions),
+};
+
+static struct gpio_led fritz4020_leds_gpio[] __initdata = {
+ {
+ .name = "fritz4020:green:lan",
+ .gpio = FRITZ4020_74HC_GPIO_LED_LAN,
+ .active_low = 1,
+ }, {
+ .name = "fritz4020:green:info",
+ .gpio = FRITZ4020_74HC_GPIO_LED_INFO,
+ .active_low = 1,
+ }, {
+ .name = "fritz4020:red:info",
+ .gpio = FRITZ4020_74HC_GPIO_LED_INFO_RED,
+ .active_low = 1,
+ }, {
+ .name = "fritz4020:green:power",
+ .gpio = FRITZ4020_74HC_GPIO_LED_POWER,
+ .active_low = 1,
+ }, {
+ .name = "fritz4020:green:wlan",
+ .gpio = FRITZ4020_74HC_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "fritz4020:green:wan",
+ .gpio = FRITZ4020_74HC_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button fritz4020_gpio_keys[] __initdata = {
+ {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = FRITZ4020_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = FRITZ4020_GPIO_BTN_WLAN,
+ .active_low = 0,
+ },
+ {
+ .desc = "WPS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = FRITZ4020_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = FRITZ4020_GPIO_BTN_WPS,
+ .active_low = 0,
+ },
+};
+
+static void __init fritz4020_setup(void) {
+ u8 *urlader = (u8 *) KSEG1ADDR(0x1f000000);
+ u8 wifi_mac[ETH_ALEN];
+
+ ath79_register_m25p80(&fritz4020_flash_data);
+
+ /* Initialize ethernet */
+ ath79_extract_mac_reverse(urlader + FRTIZ4020_OFFSET_URLADER_WIFI_MAC_REVERSE, wifi_mac);
+ ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
+ QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_mdio(1, 0x0);
+ ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, -1);
+ ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, -2);
+
+ /* WAN port */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_register_eth(0);
+
+ /* LAN ports */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(0);
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_register_eth(1);
+
+ /* Initialize 2.4GHz WiFi */
+ ath79_register_wmac_simple();
+
+ /* Activate USB Power */
+ gpio_request_one(FRITZ4020_74HC_GPIO_USB_RST,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+
+ /* Initialize USB port */
+ ath79_register_usb();
+
+ /* Register LED shift-register */
+ spi_register_board_info(fritz4020_spi_info,
+ ARRAY_SIZE(fritz4020_spi_info));
+ platform_device_register(&fritz4020_spi_device);
+
+ /* Register GPIO buttons */
+ ath79_register_gpio_keys_polled(-1, FRITZ4020_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(fritz4020_gpio_keys),
+ fritz4020_gpio_keys);
+
+ /* Register LEDs */
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz4020_leds_gpio),
+ fritz4020_leds_gpio);
+}
+
+MIPS_MACHINE(ATH79_MACH_FRITZ4020, "FRITZ4020",
+ "AVM FRITZ!Box 4020", fritz4020_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index b61ed7abcd..3d5bcfbab4 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -120,6 +120,7 @@ enum ath79_mach_type {
ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
ATH79_MACH_FRITZ300E, /* AVM FRITZ!WLAN Repeater 300E */
+ ATH79_MACH_FRITZ4020, /* AVM FRITZ!Box 4020 */
ATH79_MACH_GL_AR150, /* GL-AR150 support */
ATH79_MACH_GL_AR300, /* GL-AR300 */
ATH79_MACH_GL_AR300M, /* GL-AR300M */
diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
index 6475d2281a..3f93d6e61e 100644
--- a/target/linux/ar71xx/generic/config-default
+++ b/target/linux/ar71xx/generic/config-default
@@ -88,6 +88,7 @@ CONFIG_ATH79_MACH_EW_BALIN=y
CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_F9K1115V2=y
CONFIG_ATH79_MACH_FRITZ300E=y
+CONFIG_ATH79_MACH_FRITZ4020=y
CONFIG_ATH79_MACH_GL_AR150=y
CONFIG_ATH79_MACH_GL_AR300=y
CONFIG_ATH79_MACH_GL_AR300M=y
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index 0d3aedb460..a0f6326145 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -1282,16 +1282,31 @@ define Device/zbt-we1526
endef
TARGET_DEVICES += zbt-we1526
-define Device/fritz300e
- DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
- DEVICE_PACKAGES := fritz-tffs rssileds -swconfig -uboot-envtools
- BOARDNAME := FRITZ300E
- SUPPORTED_DEVICES := fritz300e
- IMAGE_SIZE := 15232k
+define Device/AVM
+ DEVICE_PACKAGES := fritz-tffs -uboot-envtools
KERNEL := kernel-bin | patch-cmdline | lzma | eva-image
KERNEL_INITRAMFS := $$(KERNEL)
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
append-squashfs-fakeroot-be | pad-to 256 | \
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
+
+define Device/fritz300e
+ $(call Device/AVM)
+ DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
+ DEVICE_PACKAGES := rssileds -swconfig
+ BOARDNAME := FRITZ300E
+ SUPPORTED_DEVICES := fritz300e
+ IMAGE_SIZE := 15232k
+endef
TARGET_DEVICES += fritz300e
+
+define Device/fritz4020
+ $(call Device/AVM)
+ DEVICE_TITLE := AVM FRITZ!Box 4020
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
+ BOARDNAME := FRITZ4020
+ SUPPORTED_DEVICES := fritz4020
+ IMAGE_SIZE := 15232k
+endef
+TARGET_DEVICES += fritz4020