diff options
Diffstat (limited to 'target')
26 files changed, 4598 insertions, 2412 deletions
diff --git a/target/linux/brcm47xx/patches-3.3/047-bcma-add-new-PCI-ID.patch b/target/linux/brcm47xx/patches-3.3/047-bcma-add-new-PCI-ID.patch index 77062c3dab..fb658345e6 100644 --- a/target/linux/brcm47xx/patches-3.3/047-bcma-add-new-PCI-ID.patch +++ b/target/linux/brcm47xx/patches-3.3/047-bcma-add-new-PCI-ID.patch @@ -14,7 +14,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> --- a/drivers/bcma/host_pci.c +++ b/drivers/bcma/host_pci.c -@@ -269,6 +269,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ +@@ -272,6 +272,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, diff --git a/target/linux/brcm47xx/patches-3.3/060-bcma-use-fallback-sprom-if-no-on-chip-sprom-is-avail.patch b/target/linux/brcm47xx/patches-3.3/060-bcma-use-fallback-sprom-if-no-on-chip-sprom-is-avail.patch deleted file mode 100644 index abc638d244..0000000000 --- a/target/linux/brcm47xx/patches-3.3/060-bcma-use-fallback-sprom-if-no-on-chip-sprom-is-avail.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/drivers/bcma/sprom.c -+++ b/drivers/bcma/sprom.c -@@ -404,16 +404,19 @@ int bcma_sprom_get(struct bcma_bus *bus) - return -EOPNOTSUPP; - - if (!bcma_sprom_ext_available(bus)) { -+ bool sprom_onchip; -+ - /* - * External SPROM takes precedence so check - * on-chip OTP only when no external SPROM - * is present. - */ -- if (bcma_sprom_onchip_available(bus)) { -+ sprom_onchip = bcma_sprom_onchip_available(bus); -+ if (sprom_onchip) { - /* determine offset */ - offset = bcma_sprom_onchip_offset(bus); - } -- if (!offset) { -+ if (!offset || !sprom_onchip) { - /* - * Maybe there is no SPROM on the device? - * Now we ask the arch code if there is some sprom diff --git a/target/linux/brcm47xx/patches-3.3/182-bcma-scan-for-extra-address-space.patch b/target/linux/brcm47xx/patches-3.3/182-bcma-scan-for-extra-address-space.patch index 6e68f0cc8f..fdf5cfbe9d 100644 --- a/target/linux/brcm47xx/patches-3.3/182-bcma-scan-for-extra-address-space.patch +++ b/target/linux/brcm47xx/patches-3.3/182-bcma-scan-for-extra-address-space.patch @@ -1,6 +1,6 @@ --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c -@@ -297,6 +297,23 @@ static int bcma_get_next_core(struct bcm +@@ -323,6 +323,23 @@ static int bcma_get_next_core(struct bcm return -EILSEQ; } @@ -24,7 +24,7 @@ /* get & parse slave ports */ for (i = 0; i < ports[1]; i++) { for (j = 0; ; j++) { -@@ -309,7 +326,7 @@ static int bcma_get_next_core(struct bcm +@@ -335,7 +352,7 @@ static int bcma_get_next_core(struct bcm break; } else { if (i == 0 && j == 0) @@ -35,7 +35,7 @@ } --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h -@@ -139,6 +139,7 @@ struct bcma_device { +@@ -144,6 +144,7 @@ struct bcma_device { u8 core_unit; u32 addr; diff --git a/target/linux/brcm47xx/patches-3.3/230-bcma-find-name-for-non-brcm.patch b/target/linux/brcm47xx/patches-3.3/230-bcma-find-name-for-non-brcm.patch deleted file mode 100644 index 54addee966..0000000000 --- a/target/linux/brcm47xx/patches-3.3/230-bcma-find-name-for-non-brcm.patch +++ /dev/null @@ -1,99 +0,0 @@ ---- a/drivers/bcma/scan.c -+++ b/drivers/bcma/scan.c -@@ -19,7 +19,14 @@ struct bcma_device_id_name { - u16 id; - const char *name; - }; --struct bcma_device_id_name bcma_device_names[] = { -+ -+static const struct bcma_device_id_name bcma_arm_device_names[] = { -+ { BCMA_CORE_ARM_1176, "ARM 1176" }, -+ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, -+ { BCMA_CORE_ARM_CM3, "ARM CM3" }, -+}; -+ -+static const struct bcma_device_id_name bcma_bcm_device_names[] = { - { BCMA_CORE_OOB_ROUTER, "OOB Router" }, - { BCMA_CORE_INVALID, "Invalid" }, - { BCMA_CORE_CHIPCOMMON, "ChipCommon" }, -@@ -27,7 +34,6 @@ struct bcma_device_id_name bcma_device_n - { BCMA_CORE_SRAM, "SRAM" }, - { BCMA_CORE_SDRAM, "SDRAM" }, - { BCMA_CORE_PCI, "PCI" }, -- { BCMA_CORE_MIPS, "MIPS" }, - { BCMA_CORE_ETHERNET, "Fast Ethernet" }, - { BCMA_CORE_V90, "V90" }, - { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" }, -@@ -44,7 +50,6 @@ struct bcma_device_id_name bcma_device_n - { BCMA_CORE_PHY_A, "PHY A" }, - { BCMA_CORE_PHY_B, "PHY B" }, - { BCMA_CORE_PHY_G, "PHY G" }, -- { BCMA_CORE_MIPS_3302, "MIPS 3302" }, - { BCMA_CORE_USB11_HOST, "USB 1.1 Host" }, - { BCMA_CORE_USB11_DEV, "USB 1.1 Device" }, - { BCMA_CORE_USB20_HOST, "USB 2.0 Host" }, -@@ -58,15 +63,11 @@ struct bcma_device_id_name bcma_device_n - { BCMA_CORE_PHY_N, "PHY N" }, - { BCMA_CORE_SRAM_CTL, "SRAM Controller" }, - { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" }, -- { BCMA_CORE_ARM_1176, "ARM 1176" }, -- { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, - { BCMA_CORE_PHY_LP, "PHY LP" }, - { BCMA_CORE_PMU, "PMU" }, - { BCMA_CORE_PHY_SSN, "PHY SSN" }, - { BCMA_CORE_SDIO_DEV, "SDIO Device" }, -- { BCMA_CORE_ARM_CM3, "ARM CM3" }, - { BCMA_CORE_PHY_HT, "PHY HT" }, -- { BCMA_CORE_MIPS_74K, "MIPS 74K" }, - { BCMA_CORE_MAC_GBIT, "GBit MAC" }, - { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" }, - { BCMA_CORE_PCIE_RC, "PCIe Root Complex" }, -@@ -79,16 +80,41 @@ struct bcma_device_id_name bcma_device_n - { BCMA_CORE_SHIM, "SHIM" }, - { BCMA_CORE_DEFAULT, "Default" }, - }; --const char *bcma_device_name(struct bcma_device_id *id) -+ -+static const struct bcma_device_id_name bcma_mips_device_names[] = { -+ { BCMA_CORE_MIPS, "MIPS" }, -+ { BCMA_CORE_MIPS_3302, "MIPS 3302" }, -+ { BCMA_CORE_MIPS_74K, "MIPS 74K" }, -+}; -+ -+static const char *bcma_device_name(const struct bcma_device_id *id) - { -- int i; -+ const struct bcma_device_id_name *names; -+ int size, i; - -- if (id->manuf == BCMA_MANUF_BCM) { -- for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) { -- if (bcma_device_names[i].id == id->id) -- return bcma_device_names[i].name; -- } -+ /* search manufacturer specific names */ -+ switch (id->manuf) { -+ case BCMA_MANUF_ARM: -+ names = bcma_arm_device_names; -+ size = ARRAY_SIZE(bcma_arm_device_names); -+ break; -+ case BCMA_MANUF_BCM: -+ names = bcma_bcm_device_names; -+ size = ARRAY_SIZE(bcma_bcm_device_names); -+ break; -+ case BCMA_MANUF_MIPS: -+ names = bcma_mips_device_names; -+ size = ARRAY_SIZE(bcma_mips_device_names); -+ break; -+ default: -+ return "UNKNOWN"; - } -+ -+ for (i = 0; i < size; i++) { -+ if (names[i].id == id->id) -+ return names[i].name; -+ } -+ - return "UNKNOWN"; - } - diff --git a/target/linux/brcm47xx/patches-3.3/232-bcma_account_for_variable_pci_memory.patch b/target/linux/brcm47xx/patches-3.3/232-bcma_account_for_variable_pci_memory.patch deleted file mode 100644 index 3a2d512dc7..0000000000 --- a/target/linux/brcm47xx/patches-3.3/232-bcma_account_for_variable_pci_memory.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/drivers/bcma/driver_pci_host.c -+++ b/drivers/bcma/driver_pci_host.c -@@ -491,8 +491,9 @@ void __devinit bcma_core_pci_hostmode_in - /* Ok, ready to run, register it to the system. - * The following needs change, if we want to port hostmode - * to non-MIPS platform. */ -- io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, -- 0x04000000); -+ io_map_base = (unsigned long)ioremap_nocache(pc_host->mem_resource.start, -+ pc_host->mem_resource.end - -+ pc_host->mem_resource.start + 1); - pc_host->pci_controller.io_map_base = io_map_base; - set_io_port_base(pc_host->pci_controller.io_map_base); - /* Give some time to the PCI controller to configure itself with the new diff --git a/target/linux/brcm47xx/patches-3.3/234-bcma-always-map-4-bytes.patch b/target/linux/brcm47xx/patches-3.3/234-bcma-always-map-4-bytes.patch deleted file mode 100644 index adaadcc031..0000000000 --- a/target/linux/brcm47xx/patches-3.3/234-bcma-always-map-4-bytes.patch +++ /dev/null @@ -1,29 +0,0 @@ ---- a/drivers/bcma/driver_pci_host.c -+++ b/drivers/bcma/driver_pci_host.c -@@ -119,7 +119,7 @@ static int bcma_extpci_read_config(struc - if (unlikely(!addr)) - goto out; - err = -ENOMEM; -- mmio = ioremap_nocache(addr, len); -+ mmio = ioremap_nocache(addr, sizeof(val)); - if (!mmio) - goto out; - -@@ -171,7 +171,7 @@ static int bcma_extpci_write_config(stru - addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; - addr |= (func << 8); - addr |= (off & 0xfc); -- mmio = ioremap_nocache(addr, len); -+ mmio = ioremap_nocache(addr, sizeof(val)); - if (!mmio) - goto out; - } -@@ -180,7 +180,7 @@ static int bcma_extpci_write_config(stru - if (unlikely(!addr)) - goto out; - err = -ENOMEM; -- mmio = ioremap_nocache(addr, len); -+ mmio = ioremap_nocache(addr, sizeof(val)); - if (!mmio) - goto out; - diff --git a/target/linux/brcm47xx/patches-3.3/238-bcma-host_pci_devexit.patch b/target/linux/brcm47xx/patches-3.3/238-bcma-host_pci_devexit.patch deleted file mode 100644 index 85b47fa7f8..0000000000 --- a/target/linux/brcm47xx/patches-3.3/238-bcma-host_pci_devexit.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/bcma/host_pci.c -+++ b/drivers/bcma/host_pci.c -@@ -222,7 +222,7 @@ err_kfree_bus: - return err; - } - --static void bcma_host_pci_remove(struct pci_dev *dev) -+static void __devexit bcma_host_pci_remove(struct pci_dev *dev) - { - struct bcma_bus *bus = pci_get_drvdata(dev); - -@@ -278,7 +278,7 @@ static struct pci_driver bcma_pci_bridge - .name = "bcma-pci-bridge", - .id_table = bcma_pci_bridge_tbl, - .probe = bcma_host_pci_probe, -- .remove = bcma_host_pci_remove, -+ .remove = __devexit_p(bcma_host_pci_remove), - .driver.pm = BCMA_PM_OPS, - }; - diff --git a/target/linux/brcm47xx/patches-3.3/239-bcma-add-flush-for-resetctl-write.patch b/target/linux/brcm47xx/patches-3.3/239-bcma-add-flush-for-resetctl-write.patch deleted file mode 100644 index 285c356adf..0000000000 --- a/target/linux/brcm47xx/patches-3.3/239-bcma-add-flush-for-resetctl-write.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/bcma/core.c -+++ b/drivers/bcma/core.c -@@ -30,6 +30,7 @@ void bcma_core_disable(struct bcma_devic - udelay(10); - - bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); -+ bcma_aread32(core, BCMA_RESET_CTL); - udelay(1); - } - EXPORT_SYMBOL_GPL(bcma_core_disable); diff --git a/target/linux/brcm47xx/patches-3.3/250-ssb-remove-rev-from-boardinfo.patch b/target/linux/brcm47xx/patches-3.3/250-ssb-remove-rev-from-boardinfo.patch new file mode 100644 index 0000000000..9e9f426605 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.3/250-ssb-remove-rev-from-boardinfo.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/bcm47xx/setup.c ++++ b/arch/mips/bcm47xx/setup.c +@@ -163,8 +163,6 @@ static int bcm47xx_get_invariants(struct + iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM; + if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0) + iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); +- if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0) +- iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0); + + memset(&iv->sprom, 0, sizeof(struct ssb_sprom)); + bcm47xx_fill_sprom(&iv->sprom, NULL); diff --git a/target/linux/brcm47xx/patches-3.3/251-MIPS-bcm47xx-refactor-fetching-board-data.patch b/target/linux/brcm47xx/patches-3.3/251-MIPS-bcm47xx-refactor-fetching-board-data.patch new file mode 100644 index 0000000000..a50cd8c048 --- /dev/null +++ b/target/linux/brcm47xx/patches-3.3/251-MIPS-bcm47xx-refactor-fetching-board-data.patch @@ -0,0 +1,46 @@ +--- a/arch/mips/bcm47xx/setup.c ++++ b/arch/mips/bcm47xx/setup.c +@@ -157,12 +157,7 @@ static int bcm47xx_get_invariants(struct + /* Fill boardinfo structure */ + memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo)); + +- if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0) +- iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0); +- else +- iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM; +- if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0) +- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0); ++ bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL); + + memset(&iv->sprom, 0, sizeof(struct ssb_sprom)); + bcm47xx_fill_sprom(&iv->sprom, NULL); +--- a/arch/mips/bcm47xx/sprom.c ++++ b/arch/mips/bcm47xx/sprom.c +@@ -616,3 +616,15 @@ void bcm47xx_fill_sprom(struct ssb_sprom + bcm47xx_fill_sprom_r1(sprom, prefix); + } + } ++ ++#ifdef CONFIG_BCM47XX_SSB ++void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo, ++ const char *prefix) ++{ ++ nvram_read_u16(prefix, NULL, "boardvendor", &boardinfo->vendor, 0); ++ if (!boardinfo->vendor) ++ boardinfo->vendor = SSB_BOARDVENDOR_BCM; ++ ++ nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0); ++} ++#endif +--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h ++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h +@@ -47,4 +47,9 @@ extern enum bcm47xx_bus_type bcm47xx_bus + void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix); + void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom, const char *prefix); + ++#ifdef CONFIG_BCM47XX_SSB ++void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo, ++ const char *prefix); ++#endif ++ + #endif /* __ASM_BCM47XX_H */ diff --git a/target/linux/brcm47xx/patches-3.3/252-bcma-add-boardinfo-struct.patch b/target/linux/brcm47xx/patches-3.3/252-bcma-add-boardinfo-struct.patch new file mode 100644 index 0000000000..31ed817cca --- /dev/null +++ b/target/linux/brcm47xx/patches-3.3/252-bcma-add-boardinfo-struct.patch @@ -0,0 +1,41 @@ +--- a/arch/mips/bcm47xx/setup.c ++++ b/arch/mips/bcm47xx/setup.c +@@ -297,6 +297,8 @@ static void __init bcm47xx_register_bcma + + if (bcm47xx_bus.bcma.bus.drv_cc.flash_type == BCMA_NFLASH) + bcm47xx_nflash_struct_bcma_init(&bcm47xx_nflash, &bcm47xx_bus.bcma.bus.drv_cc); ++ ++ bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL); + } + + static int __init bcm47xx_register_flash_bcma(void) +--- a/arch/mips/bcm47xx/sprom.c ++++ b/arch/mips/bcm47xx/sprom.c +@@ -628,3 +628,15 @@ void bcm47xx_fill_ssb_boardinfo(struct s + nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0); + } + #endif ++ ++#ifdef CONFIG_BCM47XX_BCMA ++void bcm47xx_fill_bcma_boardinfo(struct bcma_boardinfo *boardinfo, ++ const char *prefix) ++{ ++ nvram_read_u16(prefix, NULL, "boardvendor", &boardinfo->vendor, 0); ++ if (!boardinfo->vendor) ++ boardinfo->vendor = SSB_BOARDVENDOR_BCM; ++ ++ nvram_read_u16(prefix, NULL, "boardtype", &boardinfo->type, 0); ++} ++#endif +--- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h ++++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx.h +@@ -51,5 +51,9 @@ void bcm47xx_fill_sprom_ethernet(struct + void bcm47xx_fill_ssb_boardinfo(struct ssb_boardinfo *boardinfo, + const char *prefix); + #endif ++#ifdef CONFIG_BCM47XX_BCMA ++void bcm47xx_fill_bcma_boardinfo(struct bcma_boardinfo *boardinfo, ++ const char *prefix); ++#endif + + #endif /* __ASM_BCM47XX_H */ diff --git a/target/linux/brcm47xx/patches-3.3/253-MIPS-bcm47xx-read-baordrev-without-prefix-from-sprom.patch b/target/linux/brcm47xx/patches-3.3/253-MIPS-bcm47xx-read-baordrev-without-prefix-from-sprom.patch new file mode 100644 index 0000000000..108987d83d --- /dev/null +++ b/target/linux/brcm47xx/patches-3.3/253-MIPS-bcm47xx-read-baordrev-without-prefix-from-sprom.patch @@ -0,0 +1,11 @@ +--- a/arch/mips/bcm47xx/sprom.c ++++ b/arch/mips/bcm47xx/sprom.c +@@ -165,6 +165,8 @@ static void bcm47xx_fill_sprom_r1234589( + const char *prefix) + { + nvram_read_u16(prefix, NULL, "boardrev", &sprom->board_rev, 0); ++ if (!sprom->board_rev) ++ nvram_read_u16(NULL, NULL, "boardrev", &sprom->board_rev, 0); + nvram_read_u16(prefix, NULL, "boardnum", &sprom->board_num, 0); + nvram_read_u8(prefix, NULL, "ledbh0", &sprom->gpio0, 0xff); + nvram_read_u8(prefix, NULL, "ledbh1", &sprom->gpio1, 0xff); diff --git a/target/linux/brcm47xx/patches-3.3/400-arch-bcm47xx.patch b/target/linux/brcm47xx/patches-3.3/400-arch-bcm47xx.patch index 0933fb6959..796a98aa82 100644 --- a/target/linux/brcm47xx/patches-3.3/400-arch-bcm47xx.patch +++ b/target/linux/brcm47xx/patches-3.3/400-arch-bcm47xx.patch @@ -33,7 +33,7 @@ +EXPORT_SYMBOL(nvram_get); --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c -@@ -384,3 +384,20 @@ static int __init bcm47xx_register_flash +@@ -379,3 +379,20 @@ static int __init bcm47xx_register_flash return -1; } fs_initcall(bcm47xx_register_flash); diff --git a/target/linux/brcm47xx/patches-3.3/980-wnr834b_no_cardbus_invariant.patch b/target/linux/brcm47xx/patches-3.3/980-wnr834b_no_cardbus_invariant.patch index 42f00ddc31..c6de865c7e 100644 --- a/target/linux/brcm47xx/patches-3.3/980-wnr834b_no_cardbus_invariant.patch +++ b/target/linux/brcm47xx/patches-3.3/980-wnr834b_no_cardbus_invariant.patch @@ -1,6 +1,6 @@ --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c -@@ -172,6 +172,10 @@ static int bcm47xx_get_invariants(struct +@@ -165,6 +165,10 @@ static int bcm47xx_get_invariants(struct if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0) iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10); diff --git a/target/linux/generic/patches-2.6.39/020-ssb_update.patch b/target/linux/generic/patches-2.6.39/020-ssb_update.patch index 404201a782..e6dec49b05 100644 --- a/target/linux/generic/patches-2.6.39/020-ssb_update.patch +++ b/target/linux/generic/patches-2.6.39/020-ssb_update.patch @@ -1,3 +1,29 @@ +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -5,12 +5,13 @@ + * because of its small size we include it in the SSB core + * instead of creating a standalone module. + * +- * Copyright 2007 Michael Buesch <mb@bu3sch.de> ++ * Copyright 2007 Michael Buesch <m@bues.ch> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + + #include <linux/pci.h> ++#include <linux/module.h> + #include <linux/ssb/ssb.h> + + #include "ssb_private.h" +@@ -28,6 +29,8 @@ static const struct pci_device_id b43_pc + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c @@ -3,7 +3,7 @@ @@ -216,6 +242,17 @@ + return 0; + } +} +--- a/drivers/ssb/driver_extif.c ++++ b/drivers/ssb/driver_extif.c +@@ -3,7 +3,7 @@ + * Broadcom EXTIF core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> ++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch> + * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org> + * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net> + * --- a/drivers/ssb/driver_gige.c +++ b/drivers/ssb/driver_gige.c @@ -3,7 +3,7 @@ @@ -261,6 +298,27 @@ { struct ssb_gige *dev; u32 base, tmslow, tmshigh; +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -3,7 +3,7 @@ + * Broadcom MIPS core driver + * + * Copyright 2005, Broadcom Corporation +- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> ++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m + struct ssb_bus *bus = mcore->dev->bus; + u32 pll_type, n, m, rate = 0; + ++ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) ++ return ssb_pmu_get_cpu_clock(&bus->chipco); ++ + if (bus->extif.dev) { + ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); + } else if (bus->chipco.dev) { --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -3,7 +3,7 @@ @@ -635,6 +693,17 @@ } pc->setup_done = 1; out: +--- a/drivers/ssb/embedded.c ++++ b/drivers/ssb/embedded.c +@@ -3,7 +3,7 @@ + * Embedded systems support code + * + * Copyright 2005-2008, Broadcom Corporation +- * Copyright 2006-2008, Michael Buesch <mb@bu3sch.de> ++ * Copyright 2006-2008, Michael Buesch <m@bues.ch> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -3,7 +3,7 @@ @@ -929,7 +998,26 @@ * Copyright (C) 2005 Martin Langer <martin-langer@gmx.de> * Copyright (C) 2005 Stefano Brivio <st3@riseup.net> * Copyright (C) 2005 Danny van Dyk <kugelfang@gentoo.org> -@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss +@@ -178,6 +178,18 @@ err_pci: + #define SPEX(_outvar, _offset, _mask, _shift) \ + SPEX16(_outvar, _offset, _mask, _shift) + ++#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \ ++ do { \ ++ SPEX(_field[0], _offset + 0, _mask, _shift); \ ++ SPEX(_field[1], _offset + 2, _mask, _shift); \ ++ SPEX(_field[2], _offset + 4, _mask, _shift); \ ++ SPEX(_field[3], _offset + 6, _mask, _shift); \ ++ SPEX(_field[4], _offset + 8, _mask, _shift); \ ++ SPEX(_field[5], _offset + 10, _mask, _shift); \ ++ SPEX(_field[6], _offset + 12, _mask, _shift); \ ++ SPEX(_field[7], _offset + 14, _mask, _shift); \ ++ } while (0) ++ + + static inline u8 ssb_crc8(u8 crc, u8 data) + { +@@ -331,7 +343,6 @@ static void sprom_extract_r123(struct ss { int i; u16 v; @@ -937,8 +1025,24 @@ u16 loc[3]; if (out->revision == 3) /* rev 3 moved MAC */ -@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss +@@ -361,8 +372,9 @@ static void sprom_extract_r123(struct ss + SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14); + SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15); + SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0); +- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, +- SSB_SPROM1_BINF_CCODE_SHIFT); ++ if (out->revision == 1) ++ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, ++ SSB_SPROM1_BINF_CCODE_SHIFT); + SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA, + SSB_SPROM1_BINF_ANTA_SHIFT); + SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG, +@@ -388,22 +400,16 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); + if (out->revision >= 2) SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0); /* Extract the antenna gain values. */ - gain = r123_extract_antgain(out->revision, in, @@ -964,7 +1068,27 @@ } /* Revs 4 5 and 8 have partially shared layout */ -@@ -504,16 +495,14 @@ static void sprom_extract_r45(struct ssb +@@ -464,14 +470,17 @@ static void sprom_extract_r45(struct ssb + SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); + SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, + SSB_SPROM4_ETHPHY_ET1A_SHIFT); ++ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0); + if (out->revision == 4) { +- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0); + SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0); + } else { +- SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0); +@@ -504,16 +513,14 @@ static void sprom_extract_r45(struct ssb } /* Extract the antenna gain values. */ @@ -985,7 +1109,7 @@ sprom_extract_r458(out, in); -@@ -523,7 +512,13 @@ static void sprom_extract_r45(struct ssb +@@ -523,14 +530,22 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -1000,7 +1124,17 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -596,16 +591,69 @@ static void sprom_extract_r8(struct ssb_ + v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); + } +- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); +@@ -596,17 +611,127 @@ static void sprom_extract_r8(struct ssb_ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); /* Extract the antenna gain values. */ @@ -1018,7 +1152,7 @@ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); -+ + + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -1073,10 +1207,68 @@ + SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); - ++ ++ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON, ++ SSB_SPROM8_LEDDC_ON_SHIFT); ++ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF, ++ SSB_SPROM8_LEDDC_OFF_SHIFT); ++ ++ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN, ++ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT); ++ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN, ++ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT); ++ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH, ++ SSB_SPROM8_TXRXC_SWITCH_SHIFT); ++ ++ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0); ++ ++ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0); ++ ++ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP, ++ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT); ++ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER, ++ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT); ++ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT); ++ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX, ++ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT); ++ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT); ++ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT); ++ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT); ++ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL, ++ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT); ++ ++ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0); ++ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0); ++ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0); ++ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0); ++ ++ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH, ++ SSB_SPROM8_THERMAL_TRESH_SHIFT); ++ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET, ++ SSB_SPROM8_THERMAL_OFFSET_SHIFT); ++ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_PHYCAL, ++ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT); ++ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD, ++ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT); ++ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT); sprom_extract_r458(out, in); -@@ -662,7 +710,6 @@ static int sprom_extract(struct ssb_bus + /* TODO - get remaining rev 8 stuff needed */ +@@ -662,7 +787,6 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -1084,7 +1276,7 @@ int err; u16 *buf; -@@ -707,10 +754,17 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -707,10 +831,17 @@ static int ssb_pci_sprom_get(struct ssb_ if (err) { /* All CRC attempts failed. * Maybe there is no SPROM on the device? @@ -1106,7 +1298,7 @@ err = 0; goto out_free; } -@@ -728,12 +782,9 @@ out_free: +@@ -728,12 +859,8 @@ out_free: static void ssb_pci_get_boardinfo(struct ssb_bus *bus, struct ssb_boardinfo *bi) { @@ -1118,7 +1310,6 @@ - &bi->rev); + bi->vendor = bus->host_pci->subsystem_vendor; + bi->type = bus->host_pci->subsystem_device; -+ bi->rev = bus->host_pci->revision; } int ssb_pci_get_invariants(struct ssb_bus *bus, @@ -1153,6 +1344,36 @@ { driver->probe = ssb_pcihost_probe; driver->remove = ssb_pcihost_remove; +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -3,7 +3,7 @@ + * PCMCIA-Hostbus related functions + * + * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> +- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de> ++ * Copyright 2007-2008 Michael Buesch <m@bues.ch> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ +@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( + case SSB_PCMCIA_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->TupleDataLen != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.a3 = tuple->TupleData[1]; + break; + case SSB_PCMCIA_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->TupleDataLen != 3) && --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c @@ -2,7 +2,7 @@ @@ -1196,6 +1417,36 @@ if (!bus->nr_devices) bus->nr_devices = chipid_to_nrcores(bus->chip_id); if (bus->nr_devices > ARRAY_SIZE(bus->devices)) { +--- a/drivers/ssb/sdio.c ++++ b/drivers/ssb/sdio.c +@@ -6,7 +6,7 @@ + * + * Based on drivers/ssb/pcmcia.c + * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> +- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de> ++ * Copyright 2007-2008 Michael Buesch <m@bues.ch> + * + * Licensed under the GNU/GPL. See COPYING for details. + * +@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b + case SSB_SDIO_CIS_ANTGAIN: + GOTO_ERROR_ON(tuple->size != 2, + "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz24.a3 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a0 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a1 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a2 = tuple->data[1]; +- sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ sprom->antenna_gain.a0 = tuple->data[1]; ++ sprom->antenna_gain.a1 = tuple->data[1]; ++ sprom->antenna_gain.a2 = tuple->data[1]; ++ sprom->antenna_gain.a3 = tuple->data[1]; + break; + case SSB_SDIO_CIS_BFLAGS: + GOTO_ERROR_ON((tuple->size != 3) && --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c @@ -2,7 +2,7 @@ @@ -1356,7 +1607,7 @@ u8 rssisav2g; /* 2GHz RSSI params */ u8 rssismc2g; u8 rssismf2g; -@@ -80,26 +91,104 @@ struct ssb_sprom { +@@ -80,26 +91,103 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -1465,11 +1716,10 @@ u16 vendor; u16 type; - u16 rev; -+ u8 rev; }; -@@ -229,10 +318,9 @@ struct ssb_driver { +@@ -229,10 +317,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -1483,7 +1733,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -308,7 +396,7 @@ struct ssb_bus { +@@ -308,7 +395,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -1492,7 +1742,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -404,7 +492,9 @@ extern bool ssb_is_sprom_available(struc +@@ -404,7 +491,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -1503,7 +1753,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -518,6 +608,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -518,6 +607,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -1554,6 +1804,16 @@ #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define SSB_CHIPCO_UART0_DATA 0x0300 #define SSB_CHIPCO_UART0_IMR 0x0304 +--- a/include/linux/ssb/ssb_driver_gige.h ++++ b/include/linux/ssb/ssb_driver_gige.h +@@ -2,6 +2,7 @@ + #define LINUX_SSB_DRIVER_GIGE_H_ + + #include <linux/ssb/ssb.h> ++#include <linux/bug.h> + #include <linux/pci.h> + #include <linux/spinlock.h> + --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -97,7 +97,7 @@ @@ -1565,8 +1825,53 @@ #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */ #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */ #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ -@@ -432,6 +432,56 @@ +@@ -228,6 +228,7 @@ + #define SSB_SPROM1_AGAIN_BG_SHIFT 0 + #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_AGAIN_A_SHIFT 8 ++#define SSB_SPROM1_CCODE 0x0076 + + /* SPROM Revision 2 (inherits from rev 1) */ + #define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ +@@ -267,6 +268,7 @@ + #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ + + /* SPROM Revision 4 */ ++#define SSB_SPROM4_BOARDREV 0x0042 /* Board revision */ + #define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ + #define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ + #define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */ +@@ -389,6 +391,11 @@ + #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM8_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM8_LEDDC 0x009A ++#define SSB_SPROM8_LEDDC_ON 0xFF00 /* oncount */ ++#define SSB_SPROM8_LEDDC_ON_SHIFT 8 ++#define SSB_SPROM8_LEDDC_OFF 0x00FF /* offcount */ ++#define SSB_SPROM8_LEDDC_OFF_SHIFT 0 + #define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ + #define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ + #define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 +@@ -404,6 +411,13 @@ + #define SSB_SPROM8_AGAIN2_SHIFT 0 + #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM8_AGAIN3_SHIFT 8 ++#define SSB_SPROM8_TXRXC 0x00A2 ++#define SSB_SPROM8_TXRXC_TXCHAIN 0x000f ++#define SSB_SPROM8_TXRXC_TXCHAIN_SHIFT 0 ++#define SSB_SPROM8_TXRXC_RXCHAIN 0x00f0 ++#define SSB_SPROM8_TXRXC_RXCHAIN_SHIFT 4 ++#define SSB_SPROM8_TXRXC_SWITCH 0xff00 ++#define SSB_SPROM8_TXRXC_SWITCH_SHIFT 8 + #define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ + #define SSB_SPROM8_RSSISMF2G 0x000F + #define SSB_SPROM8_RSSISMC2G 0x00F0 +@@ -430,8 +444,87 @@ + #define SSB_SPROM8_TRI5GH_SHIFT 8 + #define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ ++#define SSB_SPROM8_RXPO2G_SHIFT 0 #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 +#define SSB_SPROM8_FEM2G 0x00AE @@ -1582,10 +1887,38 @@ +#define SSB_SROM8_FEM_ANTSWLUT 0xF800 +#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 +#define SSB_SPROM8_THERMAL 0x00B2 -+#define SSB_SPROM8_MPWR_RAWTS 0x00B4 -+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 -+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 -+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++#define SSB_SPROM8_THERMAL_OFFSET 0x00ff ++#define SSB_SPROM8_THERMAL_OFFSET_SHIFT 0 ++#define SSB_SPROM8_THERMAL_TRESH 0xff00 ++#define SSB_SPROM8_THERMAL_TRESH_SHIFT 8 ++/* Temp sense related entries */ ++#define SSB_SPROM8_RAWTS 0x00B4 ++#define SSB_SPROM8_RAWTS_RAWTEMP 0x01ff ++#define SSB_SPROM8_RAWTS_RAWTEMP_SHIFT 0 ++#define SSB_SPROM8_RAWTS_MEASPOWER 0xfe00 ++#define SSB_SPROM8_RAWTS_MEASPOWER_SHIFT 9 ++#define SSB_SPROM8_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE 0x00ff ++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT 0 ++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX 0xfc00 ++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT 10 ++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION 0x0300 ++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT 8 ++/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */ ++#define SSB_SPROM8_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR 0x000f ++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT 0 ++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP 0x0010 ++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4 ++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020 ++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5 ++#define SSB_SPROM8_TEMPDELTA 0x00BA ++#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff ++#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0 ++#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00 ++#define SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT 8 ++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS 0xf000 ++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT 12 + +/* There are 4 blocks with power info sharing the same layout */ +#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 @@ -1622,7 +1955,7 @@ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -@@ -456,12 +506,53 @@ +@@ -456,12 +549,63 @@ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ #define SSB_SPROM8_PA1HIB1 0x00DA #define SSB_SPROM8_PA1HIB2 0x00DC @@ -1633,6 +1966,16 @@ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ ++#define SSB_SPROM8_2G_MCSPO 0x0152 ++#define SSB_SPROM8_5G_MCSPO 0x0162 ++#define SSB_SPROM8_5GL_MCSPO 0x0172 ++#define SSB_SPROM8_5GH_MCSPO 0x0182 ++ ++#define SSB_SPROM8_CDDPO 0x0192 ++#define SSB_SPROM8_STBCPO 0x0194 ++#define SSB_SPROM8_BW40PO 0x0196 ++#define SSB_SPROM8_BWDUPPO 0x0198 ++ +/* Values for boardflags_lo read from SPROM */ +#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ +#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ @@ -1676,133 +2019,3 @@ /* Values for SSB_SPROM1_BINF_CCODE */ enum { SSB_SPROM1CCODE_WORLD = 0, ---- a/drivers/ssb/b43_pci_bridge.c -+++ b/drivers/ssb/b43_pci_bridge.c -@@ -5,12 +5,13 @@ - * because of its small size we include it in the SSB core - * instead of creating a standalone module. - * -- * Copyright 2007 Michael Buesch <mb@bu3sch.de> -+ * Copyright 2007 Michael Buesch <m@bues.ch> - * - * Licensed under the GNU/GPL. See COPYING for details. - */ - - #include <linux/pci.h> -+#include <linux/module.h> - #include <linux/ssb/ssb.h> - - #include "ssb_private.h" ---- a/drivers/ssb/driver_extif.c -+++ b/drivers/ssb/driver_extif.c -@@ -3,7 +3,7 @@ - * Broadcom EXTIF core driver - * - * Copyright 2005, Broadcom Corporation -- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> -+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch> - * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org> - * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net> - * ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -3,7 +3,7 @@ - * Broadcom MIPS core driver - * - * Copyright 2005, Broadcom Corporation -- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> -+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch> - * - * Licensed under the GNU/GPL. See COPYING for details. - */ -@@ -208,6 +208,9 @@ u32 ssb_cpu_clock(struct ssb_mipscore *m - struct ssb_bus *bus = mcore->dev->bus; - u32 pll_type, n, m, rate = 0; - -+ if (bus->chipco.capabilities & SSB_CHIPCO_CAP_PMU) -+ return ssb_pmu_get_cpu_clock(&bus->chipco); -+ - if (bus->extif.dev) { - ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); - } else if (bus->chipco.dev) { ---- a/drivers/ssb/embedded.c -+++ b/drivers/ssb/embedded.c -@@ -3,7 +3,7 @@ - * Embedded systems support code - * - * Copyright 2005-2008, Broadcom Corporation -- * Copyright 2006-2008, Michael Buesch <mb@bu3sch.de> -+ * Copyright 2006-2008, Michael Buesch <m@bues.ch> - * - * Licensed under the GNU/GPL. See COPYING for details. - */ ---- a/drivers/ssb/pcmcia.c -+++ b/drivers/ssb/pcmcia.c -@@ -3,7 +3,7 @@ - * PCMCIA-Hostbus related functions - * - * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> -- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de> -+ * Copyright 2007-2008 Michael Buesch <m@bues.ch> - * - * Licensed under the GNU/GPL. See COPYING for details. - */ -@@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( - case SSB_PCMCIA_CIS_ANTGAIN: - GOTO_ERROR_ON(tuple->TupleDataLen != 2, - "antg tpl size"); -- sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; -- sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; -+ sprom->antenna_gain.a0 = tuple->TupleData[1]; -+ sprom->antenna_gain.a1 = tuple->TupleData[1]; -+ sprom->antenna_gain.a2 = tuple->TupleData[1]; -+ sprom->antenna_gain.a3 = tuple->TupleData[1]; - break; - case SSB_PCMCIA_CIS_BFLAGS: - GOTO_ERROR_ON((tuple->TupleDataLen != 3) && ---- a/drivers/ssb/sdio.c -+++ b/drivers/ssb/sdio.c -@@ -6,7 +6,7 @@ - * - * Based on drivers/ssb/pcmcia.c - * Copyright 2006 Johannes Berg <johannes@sipsolutions.net> -- * Copyright 2007-2008 Michael Buesch <mb@bu3sch.de> -+ * Copyright 2007-2008 Michael Buesch <m@bues.ch> - * - * Licensed under the GNU/GPL. See COPYING for details. - * -@@ -551,14 +551,10 @@ int ssb_sdio_get_invariants(struct ssb_b - case SSB_SDIO_CIS_ANTGAIN: - GOTO_ERROR_ON(tuple->size != 2, - "antg tpl size"); -- sprom->antenna_gain.ghz24.a0 = tuple->data[1]; -- sprom->antenna_gain.ghz24.a1 = tuple->data[1]; -- sprom->antenna_gain.ghz24.a2 = tuple->data[1]; -- sprom->antenna_gain.ghz24.a3 = tuple->data[1]; -- sprom->antenna_gain.ghz5.a0 = tuple->data[1]; -- sprom->antenna_gain.ghz5.a1 = tuple->data[1]; -- sprom->antenna_gain.ghz5.a2 = tuple->data[1]; -- sprom->antenna_gain.ghz5.a3 = tuple->data[1]; -+ sprom->antenna_gain.a0 = tuple->data[1]; -+ sprom->antenna_gain.a1 = tuple->data[1]; -+ sprom->antenna_gain.a2 = tuple->data[1]; -+ sprom->antenna_gain.a3 = tuple->data[1]; - break; - case SSB_SDIO_CIS_BFLAGS: - GOTO_ERROR_ON((tuple->size != 3) && ---- a/include/linux/ssb/ssb_driver_gige.h -+++ b/include/linux/ssb/ssb_driver_gige.h -@@ -2,6 +2,7 @@ - #define LINUX_SSB_DRIVER_GIGE_H_ - - #include <linux/ssb/ssb.h> -+#include <linux/bug.h> - #include <linux/pci.h> - #include <linux/spinlock.h> - diff --git a/target/linux/generic/patches-2.6.39/021-ssb_add_pci_id.patch b/target/linux/generic/patches-2.6.39/021-ssb_add_pci_id.patch deleted file mode 100644 index 7cffebec48..0000000000 --- a/target/linux/generic/patches-2.6.39/021-ssb_add_pci_id.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/ssb/b43_pci_bridge.c -+++ b/drivers/ssb/b43_pci_bridge.c -@@ -29,6 +29,8 @@ static const struct pci_device_id b43_pc - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, diff --git a/target/linux/generic/patches-2.6.39/025-bcma_backport.patch b/target/linux/generic/patches-2.6.39/025-bcma_backport.patch index 036f4199ad..937fc2f267 100644 --- a/target/linux/generic/patches-2.6.39/025-bcma_backport.patch +++ b/target/linux/generic/patches-2.6.39/025-bcma_backport.patch @@ -234,7 +234,7 @@ +#endif --- /dev/null +++ b/drivers/bcma/core.c -@@ -0,0 +1,126 @@ +@@ -0,0 +1,127 @@ +/* + * Broadcom specific AMBA + * Core ops @@ -266,6 +266,7 @@ + udelay(10); + + bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); ++ bcma_aread32(core, BCMA_RESET_CTL); + udelay(1); +} +EXPORT_SYMBOL_GPL(bcma_core_disable); @@ -313,7 +314,7 @@ + pr_err("HT force timeout\n"); + break; + case BCMA_CLKMODE_DYNAMIC: -+ pr_warn("Dynamic clockmode not supported yet!\n"); ++ bcma_set32(core, BCMA_CLKCTLST, ~BCMA_CLKCTLST_FORCEHT); + break; + } +} @@ -834,8 +835,267 @@ + return bcma_pmu_get_clockcontrol(cc); +} --- /dev/null ++++ b/drivers/bcma/driver_mips.c +@@ -0,0 +1,256 @@ ++/* ++ * Broadcom specific AMBA ++ * Broadcom MIPS32 74K core driver ++ * ++ * Copyright 2009, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> ++ * Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com> ++ * Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++ ++#include <linux/bcma/bcma.h> ++ ++#include <linux/serial.h> ++#include <linux/serial_core.h> ++#include <linux/serial_reg.h> ++#include <linux/time.h> ++ ++/* The 47162a0 hangs when reading MIPS DMP registers registers */ ++static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) ++{ ++ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && ++ dev->id.id == BCMA_CORE_MIPS_74K; ++} ++ ++/* The 5357b0 hangs when reading USB20H DMP registers */ ++static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) ++{ ++ return (dev->bus->chipinfo.id == 0x5357 || ++ dev->bus->chipinfo.id == 0x4749) && ++ dev->bus->chipinfo.pkg == 11 && ++ dev->id.id == BCMA_CORE_USB20_HOST; ++} ++ ++static inline u32 mips_read32(struct bcma_drv_mips *mcore, ++ u16 offset) ++{ ++ return bcma_read32(mcore->core, offset); ++} ++ ++static inline void mips_write32(struct bcma_drv_mips *mcore, ++ u16 offset, ++ u32 value) ++{ ++ bcma_write32(mcore->core, offset, value); ++} ++ ++static const u32 ipsflag_irq_mask[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1, ++ BCMA_MIPS_IPSFLAG_IRQ2, ++ BCMA_MIPS_IPSFLAG_IRQ3, ++ BCMA_MIPS_IPSFLAG_IRQ4, ++}; ++ ++static const u32 ipsflag_irq_shift[] = { ++ 0, ++ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, ++ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, ++}; ++ ++static u32 bcma_core_mips_irqflag(struct bcma_device *dev) ++{ ++ u32 flag; ++ ++ if (bcma_core_mips_bcm47162a0_quirk(dev)) ++ return dev->core_index; ++ if (bcma_core_mips_bcm5357b0_quirk(dev)) ++ return dev->core_index; ++ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); ++ ++ return flag & 0x1F; ++} ++ ++/* Get the MIPS IRQ assignment for a specified device. ++ * If unassigned, 0 is returned. ++ */ ++unsigned int bcma_core_mips_irq(struct bcma_device *dev) ++{ ++ struct bcma_device *mdev = dev->bus->drv_mips.core; ++ u32 irqflag; ++ unsigned int irq; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ ++ for (irq = 1; irq <= 4; irq++) ++ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & ++ (1 << irqflag)) ++ return irq; ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_mips_irq); ++ ++static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ unsigned int oldirq = bcma_core_mips_irq(dev); ++ struct bcma_bus *bus = dev->bus; ++ struct bcma_device *mdev = bus->drv_mips.core; ++ u32 irqflag; ++ ++ irqflag = bcma_core_mips_irqflag(dev); ++ BUG_ON(oldirq == 6); ++ ++ dev->irq = irq + 2; ++ ++ /* clear the old irq */ ++ if (oldirq == 0) ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & ++ ~(1 << irqflag)); ++ else ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); ++ ++ /* assign the new one */ ++ if (irq == 0) { ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), ++ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | ++ (1 << irqflag)); ++ } else { ++ u32 oldirqflag = bcma_read32(mdev, ++ BCMA_MIPS_MIPS74K_INTMASK(irq)); ++ if (oldirqflag) { ++ struct bcma_device *core; ++ ++ /* backplane irq line is in use, find out who uses ++ * it and set user to irq 0 ++ */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ if ((1 << bcma_core_mips_irqflag(core)) == ++ oldirqflag) { ++ bcma_core_mips_set_irq(core, 0); ++ break; ++ } ++ } ++ } ++ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), ++ 1 << irqflag); ++ } ++ ++ pr_info("set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.id, oldirq + 2, irq + 2); ++} ++ ++static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) ++{ ++ int i; ++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; ++ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); ++ for (i = 0; i <= 6; i++) ++ printk(" %s%s", irq_name[i], i == irq ? "*" : " "); ++ printk("\n"); ++} ++ ++static void bcma_core_mips_dump_irq(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); ++ } ++} ++ ++u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) ++ return bcma_pmu_get_clockcpu(&bus->drv_cc); ++ ++ pr_err("No PMU available, need this to get the cpu clock\n"); ++ return 0; ++} ++EXPORT_SYMBOL(bcma_cpu_clock); ++ ++static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus = mcore->core->bus; ++ ++ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { ++ case BCMA_CC_FLASHT_STSER: ++ case BCMA_CC_FLASHT_ATSER: ++ pr_err("Serial flash not supported.\n"); ++ break; ++ case BCMA_CC_FLASHT_PARA: ++ pr_info("found parallel flash.\n"); ++ bus->drv_cc.pflash.window = 0x1c000000; ++ bus->drv_cc.pflash.window_size = 0x02000000; ++ ++ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & ++ BCMA_CC_FLASH_CFG_DS) == 0) ++ bus->drv_cc.pflash.buswidth = 1; ++ else ++ bus->drv_cc.pflash.buswidth = 2; ++ break; ++ default: ++ pr_err("flash not supported.\n"); ++ } ++} ++ ++void bcma_core_mips_init(struct bcma_drv_mips *mcore) ++{ ++ struct bcma_bus *bus; ++ struct bcma_device *core; ++ bus = mcore->core->bus; ++ ++ pr_info("Initializing MIPS core...\n"); ++ ++ if (!mcore->setup_done) ++ mcore->assigned_irqs = 1; ++ ++ /* Assign IRQs to all cores on the bus */ ++ list_for_each_entry_reverse(core, &bus->cores, list) { ++ int mips_irq; ++ if (core->irq) ++ continue; ++ ++ mips_irq = bcma_core_mips_irq(core); ++ if (mips_irq > 4) ++ core->irq = 0; ++ else ++ core->irq = mips_irq + 2; ++ if (core->irq > 5) ++ continue; ++ switch (core->id.id) { ++ case BCMA_CORE_PCI: ++ case BCMA_CORE_PCIE: ++ case BCMA_CORE_ETHERNET: ++ case BCMA_CORE_ETHERNET_GBIT: ++ case BCMA_CORE_MAC_GBIT: ++ case BCMA_CORE_80211: ++ case BCMA_CORE_USB20_HOST: ++ /* These devices get their own IRQ line if available, ++ * the rest goes on IRQ0 ++ */ ++ if (mcore->assigned_irqs <= 4) ++ bcma_core_mips_set_irq(core, ++ mcore->assigned_irqs++); ++ break; ++ } ++ } ++ pr_info("IRQ reconfiguration done\n"); ++ bcma_core_mips_dump_irq(bus); ++ ++ if (mcore->setup_done) ++ return; ++ ++ bcma_chipco_serial_init(&bus->drv_cc); ++ bcma_core_mips_flash_detect(mcore); ++ mcore->setup_done = true; ++} +--- /dev/null +++ b/drivers/bcma/driver_pci.c -@@ -0,0 +1,225 @@ +@@ -0,0 +1,274 @@ +/* + * Broadcom specific AMBA + * PCI Core @@ -861,14 +1121,12 @@ + return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); +} + -+#if 0 +static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) +{ + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_ADDR, address); + pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); +} -+#endif + +static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) +{ @@ -1007,13 +1265,50 @@ + tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); +} + ++static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc) ++{ ++ struct bcma_device *core = pc->core; ++ u16 val16, core_index; ++ uint regoff; ++ ++ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET); ++ core_index = (u16)core->core_index; ++ ++ val16 = pcicore_read16(pc, regoff); ++ if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT) ++ != core_index) { ++ val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) | ++ (val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK); ++ pcicore_write16(pc, regoff, val16); ++ } ++} ++ ++/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */ ++/* Needs to happen when coming out of 'standby'/'hibernate' */ ++static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc) ++{ ++ u16 val16; ++ uint regoff; ++ ++ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_MISC_CONFIG); ++ ++ val16 = pcicore_read16(pc, regoff); ++ ++ if (!(val16 & BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST)) { ++ val16 |= BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST; ++ pcicore_write16(pc, regoff, val16); ++ } ++} ++ +/************************************************** + * Init. + **************************************************/ + +static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +{ ++ bcma_core_pci_fixcfg(pc); + bcma_pcicore_serdes_workaround(pc); ++ bcma_core_pci_config_fixup(pc); +} + +void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc) @@ -1061,9 +1356,614 @@ + return err; +} +EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); ++ ++void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) ++{ ++ u32 w; ++ ++ w = bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); ++ if (extend) ++ w |= BCMA_CORE_PCI_ASPMTIMER_EXTEND; ++ else ++ w &= ~BCMA_CORE_PCI_ASPMTIMER_EXTEND; ++ bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); ++ bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); +--- /dev/null ++++ b/drivers/bcma/driver_pci_host.c +@@ -0,0 +1,588 @@ ++/* ++ * Broadcom specific AMBA ++ * PCI Core in hostmode ++ * ++ * Copyright 2005 - 2011, Broadcom Corporation ++ * Copyright 2006, 2007, Michael Buesch <m@bues.ch> ++ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include <linux/pci.h> ++#include <linux/bcma/bcma.h> ++#include <asm/paccess.h> ++ ++/* Probe a 32bit value on the bus and catch bus exceptions. ++ * Returns nonzero on a bus exception. ++ * This is MIPS specific */ ++#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) ++ ++/* Assume one-hot slot wiring */ ++#define BCMA_PCI_SLOT_MAX 16 ++#define PCI_CONFIG_SPACE_SIZE 256 ++ ++bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ u16 chipid_top; ++ u32 tmp; ++ ++ chipid_top = (bus->chipinfo.id & 0xFF00); ++ if (chipid_top != 0x4700 && ++ chipid_top != 0x5300) ++ return false; ++ ++ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { ++ pr_info("This PCI core is disabled and not working\n"); ++ return false; ++ } ++ ++ bcma_core_enable(pc->core, 0); ++ ++ return !mips_busprobe32(tmp, pc->core->io_addr); ++} ++ ++static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); ++} ++ ++static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, ++ u32 data) ++{ ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); ++ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); ++ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); ++} ++ ++static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off) ++{ ++ u32 addr = 0; ++ ++ /* Issue config commands only when the data link is up (atleast ++ * one external pcie device is present). ++ */ ++ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) ++ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) ++ goto out; ++ ++ /* Type 0 transaction */ ++ /* Slide the PCI window to the appropriate slot */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ /* Calculate the address */ ++ addr = pc->host_controller->host_cfg_addr; ++ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); ++ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); ++ addr |= (off & ~3); ++ ++out: ++ return addr; ++} ++ ++static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr, val; ++ void __iomem *mmio = 0; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* we support only two functions on device 0 */ ++ if (func > 1) ++ return -EINVAL; ++ ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off >= PCI_CONFIG_SPACE_SIZE) { ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ val = bcma_pcie_read_config(pc, addr); ++ } else { ++ addr = BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ val = pcicore_read32(pc, addr); ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, sizeof(val)); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ ++ val = readl(mmio); ++ } ++ val >>= (8 * (off & 3)); ++ ++ switch (len) { ++ case 1: ++ *((u8 *)buf) = (u8)val; ++ break; ++ case 2: ++ *((u16 *)buf) = (u16)val; ++ break; ++ case 4: ++ *((u32 *)buf) = (u32)val; ++ break; ++ } ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, ++ unsigned int func, unsigned int off, ++ const void *buf, int len) ++{ ++ int err = -EINVAL; ++ u32 addr = 0, val = 0; ++ void __iomem *mmio = 0; ++ u16 chipid = pc->core->bus->chipinfo.id; ++ ++ WARN_ON(!pc->hostmode); ++ if (unlikely(len != 1 && len != 2 && len != 4)) ++ goto out; ++ if (dev == 0) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ if (off < PCI_CONFIG_SPACE_SIZE) { ++ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; ++ addr |= (func << 8); ++ addr |= (off & 0xfc); ++ mmio = ioremap_nocache(addr, sizeof(val)); ++ if (!mmio) ++ goto out; ++ } ++ } else { ++ addr = bcma_get_cfgspace_addr(pc, dev, func, off); ++ if (unlikely(!addr)) ++ goto out; ++ err = -ENOMEM; ++ mmio = ioremap_nocache(addr, sizeof(val)); ++ if (!mmio) ++ goto out; ++ ++ if (mips_busprobe32(val, mmio)) { ++ val = 0xffffffff; ++ goto unmap; ++ } ++ } ++ ++ switch (len) { ++ case 1: ++ val = readl(mmio); ++ val &= ~(0xFF << (8 * (off & 3))); ++ val |= *((const u8 *)buf) << (8 * (off & 3)); ++ break; ++ case 2: ++ val = readl(mmio); ++ val &= ~(0xFFFF << (8 * (off & 3))); ++ val |= *((const u16 *)buf) << (8 * (off & 3)); ++ break; ++ case 4: ++ val = *((const u32 *)buf); ++ break; ++ } ++ if (dev == 0 && !addr) { ++ /* accesses to config registers with offsets >= 256 ++ * requires indirect access. ++ */ ++ addr = (func << 12); ++ addr |= (off & 0x0FFF); ++ bcma_pcie_write_config(pc, addr, val); ++ } else { ++ writel(val, mmio); ++ ++ if (chipid == 0x4716 || chipid == 0x4748) ++ readl(mmio); ++ } ++ ++ err = 0; ++unmap: ++ if (mmio) ++ iounmap(mmio); ++out: ++ return err; ++} ++ ++static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 *val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, ++ unsigned int devfn, ++ int reg, int size, u32 val) ++{ ++ unsigned long flags; ++ int err; ++ struct bcma_drv_pci *pc; ++ struct bcma_drv_pci_host *pc_host; ++ ++ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); ++ pc = pc_host->pdev; ++ ++ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); ++ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), reg, &val, size); ++ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); ++ ++ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; ++} ++ ++/* return cap_offset if requested capability exists in the PCI config space */ ++static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, ++ unsigned int dev, ++ unsigned int func, u8 req_cap_id, ++ unsigned char *buf, u32 *buflen) ++{ ++ u8 cap_id; ++ u8 cap_ptr = 0; ++ u32 bufsize; ++ u8 byte_val; ++ ++ /* check for Header type 0 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, ++ sizeof(u8)); ++ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) ++ return cap_ptr; ++ ++ /* check if the capability pointer field exists */ ++ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, ++ sizeof(u8)); ++ if (!(byte_val & PCI_STATUS_CAP_LIST)) ++ return cap_ptr; ++ ++ /* check if the capability pointer is 0x00 */ ++ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ ++ /* loop thr'u the capability list and see if the requested capabilty ++ * exists */ ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); ++ while (cap_id != req_cap_id) { ++ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, ++ sizeof(u8)); ++ if (cap_ptr == 0x00) ++ return cap_ptr; ++ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, ++ sizeof(u8)); ++ } ++ ++ /* found the caller requested capability */ ++ if ((buf != NULL) && (buflen != NULL)) { ++ u8 cap_data; ++ ++ bufsize = *buflen; ++ if (!bufsize) ++ return cap_ptr; ++ ++ *buflen = 0; ++ ++ /* copy the cpability data excluding cap ID and next ptr */ ++ cap_data = cap_ptr + 2; ++ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) ++ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; ++ *buflen = bufsize; ++ while (bufsize--) { ++ bcma_extpci_read_config(pc, dev, func, cap_data, buf, ++ sizeof(u8)); ++ cap_data++; ++ buf++; ++ } ++ } ++ ++ return cap_ptr; ++} ++ ++/* If the root port is capable of returning Config Request ++ * Retry Status (CRS) Completion Status to software then ++ * enable the feature. ++ */ ++static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) ++{ ++ u8 cap_ptr, root_ctrl, root_cap, dev; ++ u16 val16; ++ int i; ++ ++ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, ++ NULL); ++ root_cap = cap_ptr + PCI_EXP_RTCAP; ++ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); ++ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { ++ /* Enable CRS software visibility */ ++ root_ctrl = cap_ptr + PCI_EXP_RTCTL; ++ val16 = PCI_EXP_RTCTL_CRSSVE; ++ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, ++ sizeof(u16)); ++ ++ /* Initiate a configuration request to read the vendor id ++ * field of the device function's config space header after ++ * 100 ms wait time from the end of Reset. If the device is ++ * not done with its internal initialization, it must at ++ * least return a completion TLP, with a completion status ++ * of "Configuration Request Retry Status (CRS)". The root ++ * complex must complete the request to the host by returning ++ * a read-data value of 0001h for the Vendor ID field and ++ * all 1s for any additional bytes included in the request. ++ * Poll using the config reads for max wait time of 1 sec or ++ * until we receive the successful completion status. Repeat ++ * the procedure for all the devices. ++ */ ++ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { ++ for (i = 0; i < 100000; i++) { ++ bcma_extpci_read_config(pc, dev, 0, ++ PCI_VENDOR_ID, &val16, ++ sizeof(val16)); ++ if (val16 != 0x1) ++ break; ++ udelay(10); ++ } ++ if (val16 == 0x1) ++ pr_err("PCI: Broken device in slot %d\n", dev); ++ } ++ } ++} ++ ++void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) ++{ ++ struct bcma_bus *bus = pc->core->bus; ++ struct bcma_drv_pci_host *pc_host; ++ u32 tmp; ++ u32 pci_membase_1G; ++ unsigned long io_map_base; ++ ++ pr_info("PCIEcore in host mode found\n"); ++ ++ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); ++ if (!pc_host) { ++ pr_err("can not allocate memory"); ++ return; ++ } ++ ++ pc->host_controller = pc_host; ++ pc_host->pci_controller.io_resource = &pc_host->io_resource; ++ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; ++ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; ++ pc_host->pdev = pc; ++ ++ pci_membase_1G = BCMA_SOC_PCI_DMA; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; ++ ++ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; ++ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; ++ ++ pc_host->mem_resource.name = "BCMA PCIcore external memory", ++ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; ++ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; ++ ++ pc_host->io_resource.name = "BCMA PCIcore external I/O", ++ pc_host->io_resource.start = 0x100; ++ pc_host->io_resource.end = 0x7FF; ++ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; ++ ++ /* Reset RC */ ++ udelay(3000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); ++ udelay(1000); ++ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | ++ BCMA_CORE_PCI_CTL_RST_OE); ++ ++ /* 64 MB I/O access window. On 4716, use ++ * sbtopcie0 to access the device registers. We ++ * can't use address match 2 (1 GB window) region ++ * as mips can't generate 64-bit address on the ++ * backplane. ++ */ ++ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); ++ } else if (bus->chipinfo.id == 0x5300) { ++ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; ++ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; ++ if (pc->core->core_unit == 0) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI_MEM); ++ } else if (pc->core->core_unit == 1) { ++ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; ++ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + ++ BCMA_SOC_PCI_MEM_SZ - 1; ++ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; ++ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ tmp | BCMA_SOC_PCI1_MEM); ++ } ++ } else ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, ++ BCMA_CORE_PCI_SBTOPCI_IO); ++ ++ /* 64 MB configuration access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); ++ ++ /* 1 GB memory access window */ ++ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, ++ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); ++ ++ ++ /* As per PCI Express Base Spec 1.1 we need to wait for ++ * at least 100 ms from the end of a reset (cold/warm/hot) ++ * before issuing configuration requests to PCI Express ++ * devices. ++ */ ++ udelay(100000); ++ ++ bcma_core_pci_enable_crs(pc); ++ ++ /* Enable PCI bridge BAR0 memory & master access */ ++ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; ++ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); ++ ++ /* Enable PCI interrupts */ ++ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); ++ ++ /* Ok, ready to run, register it to the system. ++ * The following needs change, if we want to port hostmode ++ * to non-MIPS platform. */ ++ io_map_base = (unsigned long)ioremap_nocache(pc_host->mem_resource.start, ++ resource_size(&pc_host->mem_resource)); ++ pc_host->pci_controller.io_map_base = io_map_base; ++ set_io_port_base(pc_host->pci_controller.io_map_base); ++ /* Give some time to the PCI controller to configure itself with the new ++ * values. Not waiting at this point causes crashes of the machine. */ ++ mdelay(10); ++ register_pci_controller(&pc_host->pci_controller); ++ return; ++} ++ ++/* Early PCI fixup for a device on the PCI-core bridge. */ ++static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) ++{ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) != 0) ++ return; ++ ++ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); ++ ++ /* Enable PCI bridge bus mastering and memory space */ ++ pci_set_master(dev); ++ if (pcibios_enable_device(dev, ~0) < 0) { ++ pr_err("PCI: BCMA bridge enable failed\n"); ++ return; ++ } ++ ++ /* Enable PCI bridge BAR1 prefetch and burst */ ++ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); ++ ++/* Early PCI fixup for all PCI-cores to set the correct memory address. */ ++static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) ++{ ++ struct resource *res; ++ int pos; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return; ++ } ++ if (PCI_SLOT(dev->devfn) == 0) ++ return; ++ ++ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); ++ ++ for (pos = 0; pos < 6; pos++) { ++ res = &dev->resource[pos]; ++ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) ++ pci_assign_resource(dev, pos); ++ } ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); ++ ++/* This function is called when doing a pci_enable_device(). ++ * We must first check if the device is a device on the PCI-core bridge. */ ++int bcma_core_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ ++ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); ++ ++ /* Fix up interrupt lines */ ++ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ ++ return 0; ++} ++EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); ++ ++/* PCI device IRQ mapping. */ ++int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) ++{ ++ struct bcma_drv_pci_host *pc_host; ++ ++ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { ++ /* This is not a device on the PCI-core bridge. */ ++ return -ENODEV; ++ } ++ ++ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, ++ pci_ops); ++ return bcma_core_mips_irq(pc_host->pdev->core) + 2; ++} ++EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); --- /dev/null +++ b/drivers/bcma/host_pci.c -@@ -0,0 +1,292 @@ +@@ -0,0 +1,295 @@ +/* + * Broadcom specific AMBA + * PCI Host @@ -1267,6 +2167,9 @@ + bus->hosttype = BCMA_HOSTTYPE_PCI; + bus->ops = &bcma_host_pci_ops; + ++ bus->boardinfo.vendor = bus->host_pci->subsystem_vendor; ++ bus->boardinfo.type = bus->host_pci->subsystem_device; ++ + /* Register */ + err = bcma_bus_register(bus); + if (err) @@ -1288,7 +2191,7 @@ + return err; +} + -+static void bcma_host_pci_remove(struct pci_dev *dev) ++static void __devexit bcma_host_pci_remove(struct pci_dev *dev) +{ + struct bcma_bus *bus = pci_get_drvdata(dev); + @@ -1343,7 +2246,7 @@ + .name = "bcma-pci-bridge", + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, -+ .remove = bcma_host_pci_remove, ++ .remove = __devexit_p(bcma_host_pci_remove), + .driver.pm = BCMA_PM_OPS, +}; + @@ -1357,6 +2260,192 @@ + pci_unregister_driver(&bcma_pci_bridge_driver); +} --- /dev/null ++++ b/drivers/bcma/host_soc.c +@@ -0,0 +1,183 @@ ++/* ++ * Broadcom specific AMBA ++ * System on Chip (SoC) Host ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++#include "scan.h" ++#include <linux/bcma/bcma.h> ++#include <linux/bcma/bcma_soc.h> ++ ++static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset) ++{ ++ return readb(core->io_addr + offset); ++} ++ ++static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset) ++{ ++ return readw(core->io_addr + offset); ++} ++ ++static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write8(struct bcma_device *core, u16 offset, ++ u8 value) ++{ ++ writeb(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write16(struct bcma_device *core, u16 offset, ++ u16 value) ++{ ++ writew(value, core->io_addr + offset); ++} ++ ++static void bcma_host_soc_write32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_addr + offset); ++} ++ ++#ifdef CONFIG_BCMA_BLOCKIO ++static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ u8 *buf = buffer; ++ ++ while (count) { ++ *buf = __raw_readb(addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ *buf = (__force __le16)__raw_readw(addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ *buf = (__force __le32)__raw_readl(addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++ ++static void bcma_host_soc_block_write(struct bcma_device *core, ++ const void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ void __iomem *addr = core->io_addr + offset; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ const u8 *buf = buffer; ++ ++ while (count) { ++ __raw_writeb(*buf, addr); ++ buf++; ++ count--; ++ } ++ break; ++ } ++ case sizeof(u16): { ++ const __le16 *buf = buffer; ++ ++ WARN_ON(count & 1); ++ while (count) { ++ __raw_writew((__force u16)(*buf), addr); ++ buf++; ++ count -= 2; ++ } ++ break; ++ } ++ case sizeof(u32): { ++ const __le32 *buf = buffer; ++ ++ WARN_ON(count & 3); ++ while (count) { ++ __raw_writel((__force u32)(*buf), addr); ++ buf++; ++ count -= 4; ++ } ++ break; ++ } ++ default: ++ WARN_ON(1); ++ } ++} ++#endif /* CONFIG_BCMA_BLOCKIO */ ++ ++static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset) ++{ ++ return readl(core->io_wrap + offset); ++} ++ ++static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset, ++ u32 value) ++{ ++ writel(value, core->io_wrap + offset); ++} ++ ++const struct bcma_host_ops bcma_host_soc_ops = { ++ .read8 = bcma_host_soc_read8, ++ .read16 = bcma_host_soc_read16, ++ .read32 = bcma_host_soc_read32, ++ .write8 = bcma_host_soc_write8, ++ .write16 = bcma_host_soc_write16, ++ .write32 = bcma_host_soc_write32, ++#ifdef CONFIG_BCMA_BLOCKIO ++ .block_read = bcma_host_soc_block_read, ++ .block_write = bcma_host_soc_block_write, ++#endif ++ .aread32 = bcma_host_soc_aread32, ++ .awrite32 = bcma_host_soc_awrite32, ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc) ++{ ++ struct bcma_bus *bus = &soc->bus; ++ int err; ++ ++ /* iomap only first core. We have to read some register on this core ++ * to scan the bus. ++ */ ++ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1); ++ if (!bus->mmio) ++ return -ENOMEM; ++ ++ /* Host specific */ ++ bus->hosttype = BCMA_HOSTTYPE_SOC; ++ bus->ops = &bcma_host_soc_ops; ++ ++ /* Register */ ++ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); ++ if (err) ++ iounmap(bus->mmio); ++ ++ return err; ++} +--- /dev/null +++ b/drivers/bcma/main.c @@ -0,0 +1,387 @@ +/* @@ -1748,7 +2837,7 @@ +module_exit(bcma_modexit) --- /dev/null +++ b/drivers/bcma/scan.c -@@ -0,0 +1,507 @@ +@@ -0,0 +1,533 @@ +/* + * Broadcom specific AMBA + * Bus scanning @@ -1770,7 +2859,14 @@ + u16 id; + const char *name; +}; -+struct bcma_device_id_name bcma_device_names[] = { ++ ++static const struct bcma_device_id_name bcma_arm_device_names[] = { ++ { BCMA_CORE_ARM_1176, "ARM 1176" }, ++ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, ++ { BCMA_CORE_ARM_CM3, "ARM CM3" }, ++}; ++ ++static const struct bcma_device_id_name bcma_bcm_device_names[] = { + { BCMA_CORE_OOB_ROUTER, "OOB Router" }, + { BCMA_CORE_INVALID, "Invalid" }, + { BCMA_CORE_CHIPCOMMON, "ChipCommon" }, @@ -1778,7 +2874,6 @@ + { BCMA_CORE_SRAM, "SRAM" }, + { BCMA_CORE_SDRAM, "SDRAM" }, + { BCMA_CORE_PCI, "PCI" }, -+ { BCMA_CORE_MIPS, "MIPS" }, + { BCMA_CORE_ETHERNET, "Fast Ethernet" }, + { BCMA_CORE_V90, "V90" }, + { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" }, @@ -1795,7 +2890,6 @@ + { BCMA_CORE_PHY_A, "PHY A" }, + { BCMA_CORE_PHY_B, "PHY B" }, + { BCMA_CORE_PHY_G, "PHY G" }, -+ { BCMA_CORE_MIPS_3302, "MIPS 3302" }, + { BCMA_CORE_USB11_HOST, "USB 1.1 Host" }, + { BCMA_CORE_USB11_DEV, "USB 1.1 Device" }, + { BCMA_CORE_USB20_HOST, "USB 2.0 Host" }, @@ -1809,15 +2903,11 @@ + { BCMA_CORE_PHY_N, "PHY N" }, + { BCMA_CORE_SRAM_CTL, "SRAM Controller" }, + { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" }, -+ { BCMA_CORE_ARM_1176, "ARM 1176" }, -+ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, + { BCMA_CORE_PHY_LP, "PHY LP" }, + { BCMA_CORE_PMU, "PMU" }, + { BCMA_CORE_PHY_SSN, "PHY SSN" }, + { BCMA_CORE_SDIO_DEV, "SDIO Device" }, -+ { BCMA_CORE_ARM_CM3, "ARM CM3" }, + { BCMA_CORE_PHY_HT, "PHY HT" }, -+ { BCMA_CORE_MIPS_74K, "MIPS 74K" }, + { BCMA_CORE_MAC_GBIT, "GBit MAC" }, + { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" }, + { BCMA_CORE_PCIE_RC, "PCIe Root Complex" }, @@ -1830,16 +2920,41 @@ + { BCMA_CORE_SHIM, "SHIM" }, + { BCMA_CORE_DEFAULT, "Default" }, +}; -+const char *bcma_device_name(struct bcma_device_id *id) ++ ++static const struct bcma_device_id_name bcma_mips_device_names[] = { ++ { BCMA_CORE_MIPS, "MIPS" }, ++ { BCMA_CORE_MIPS_3302, "MIPS 3302" }, ++ { BCMA_CORE_MIPS_74K, "MIPS 74K" }, ++}; ++ ++static const char *bcma_device_name(const struct bcma_device_id *id) +{ -+ int i; ++ const struct bcma_device_id_name *names; ++ int size, i; + -+ if (id->manuf == BCMA_MANUF_BCM) { -+ for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) { -+ if (bcma_device_names[i].id == id->id) -+ return bcma_device_names[i].name; -+ } ++ /* search manufacturer specific names */ ++ switch (id->manuf) { ++ case BCMA_MANUF_ARM: ++ names = bcma_arm_device_names; ++ size = ARRAY_SIZE(bcma_arm_device_names); ++ break; ++ case BCMA_MANUF_BCM: ++ names = bcma_bcm_device_names; ++ size = ARRAY_SIZE(bcma_bcm_device_names); ++ break; ++ case BCMA_MANUF_MIPS: ++ names = bcma_mips_device_names; ++ size = ARRAY_SIZE(bcma_mips_device_names); ++ break; ++ default: ++ return "UNKNOWN"; ++ } ++ ++ for (i = 0; i < size; i++) { ++ if (names[i].id == id->id) ++ return names[i].name; + } ++ + return "UNKNOWN"; +} + @@ -2316,8 +3431,611 @@ + +#endif /* BCMA_SCAN_H_ */ --- /dev/null ++++ b/drivers/bcma/sprom.c +@@ -0,0 +1,600 @@ ++/* ++ * Broadcom specific AMBA ++ * SPROM reading ++ * ++ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ */ ++ ++#include "bcma_private.h" ++ ++#include <linux/bcma/bcma.h> ++#include <linux/bcma/bcma_regs.h> ++#include <linux/pci.h> ++#include <linux/io.h> ++#include <linux/dma-mapping.h> ++#include <linux/slab.h> ++ ++static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); ++ ++/** ++ * bcma_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. ++ * ++ * @sprom_callback: The callback function. ++ * ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * used for PCI based BCMA devices, where no valid SPROM can be found ++ * in the shadow registers and to provide the SPROM for SoCs where BCMA is ++ * to controll the system bus. ++ * ++ * This function is useful for weird architectures that have a half-assed ++ * BCMA device hardwired to their PCI bus. ++ * ++ * This function is available for architecture code, only. So it is not ++ * exported. ++ */ ++int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, ++ struct ssb_sprom *out)) ++{ ++ if (get_fallback_sprom) ++ return -EEXIST; ++ get_fallback_sprom = sprom_callback; ++ ++ return 0; ++} ++ ++static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, ++ struct ssb_sprom *out) ++{ ++ int err; ++ ++ if (!get_fallback_sprom) { ++ err = -ENOENT; ++ goto fail; ++ } ++ ++ err = get_fallback_sprom(bus, out); ++ if (err) ++ goto fail; ++ ++ pr_debug("Using SPROM revision %d provided by" ++ " platform.\n", bus->sprom.revision); ++ return 0; ++fail: ++ pr_warn("Using fallback SPROM failed (err %d)\n", err); ++ return err; ++} ++ ++/************************************************** ++ * R/W ops. ++ **************************************************/ ++ ++static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom) ++{ ++ int i; ++ for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++) ++ sprom[i] = bcma_read16(bus->drv_cc.core, ++ offset + (i * 2)); ++} ++ ++/************************************************** ++ * Validation. ++ **************************************************/ ++ ++static inline u8 bcma_crc8(u8 crc, u8 data) ++{ ++ /* Polynomial: x^8 + x^7 + x^6 + x^4 + x^2 + 1 */ ++ static const u8 t[] = { ++ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, ++ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, ++ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, ++ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, ++ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, ++ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, ++ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, ++ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, ++ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, ++ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, ++ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, ++ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, ++ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, ++ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, ++ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, ++ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, ++ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, ++ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, ++ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, ++ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, ++ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, ++ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, ++ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, ++ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, ++ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, ++ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, ++ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, ++ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, ++ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, ++ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, ++ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, ++ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F, ++ }; ++ return t[crc ^ data]; ++} ++ ++static u8 bcma_sprom_crc(const u16 *sprom) ++{ ++ int word; ++ u8 crc = 0xFF; ++ ++ for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) { ++ crc = bcma_crc8(crc, sprom[word] & 0x00FF); ++ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8); ++ } ++ crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF); ++ crc ^= 0xFF; ++ ++ return crc; ++} ++ ++static int bcma_sprom_check_crc(const u16 *sprom) ++{ ++ u8 crc; ++ u8 expected_crc; ++ u16 tmp; ++ ++ crc = bcma_sprom_crc(sprom); ++ tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC; ++ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT; ++ if (crc != expected_crc) ++ return -EPROTO; ++ ++ return 0; ++} ++ ++static int bcma_sprom_valid(const u16 *sprom) ++{ ++ u16 revision; ++ int err; ++ ++ err = bcma_sprom_check_crc(sprom); ++ if (err) ++ return err; ++ ++ revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV; ++ if (revision != 8 && revision != 9) { ++ pr_err("Unsupported SPROM revision: %d\n", revision); ++ return -ENOENT; ++ } ++ ++ return 0; ++} ++ ++/************************************************** ++ * SPROM extraction. ++ **************************************************/ ++ ++#define SPOFF(offset) ((offset) / sizeof(u16)) ++ ++#define SPEX(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) ++ ++#define SPEX32(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((((u32)sprom[SPOFF((_offset)+2)] << 16 | \ ++ sprom[SPOFF(_offset)]) & (_mask)) >> (_shift)) ++ ++#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \ ++ do { \ ++ SPEX(_field[0], _offset + 0, _mask, _shift); \ ++ SPEX(_field[1], _offset + 2, _mask, _shift); \ ++ SPEX(_field[2], _offset + 4, _mask, _shift); \ ++ SPEX(_field[3], _offset + 6, _mask, _shift); \ ++ SPEX(_field[4], _offset + 8, _mask, _shift); \ ++ SPEX(_field[5], _offset + 10, _mask, _shift); \ ++ SPEX(_field[6], _offset + 12, _mask, _shift); \ ++ SPEX(_field[7], _offset + 14, _mask, _shift); \ ++ } while (0) ++ ++static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) ++{ ++ u16 v, o; ++ int i; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(bus->sprom.core_pwr_info)); ++ ++ bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & ++ SSB_SPROM_REVISION_REV; ++ ++ for (i = 0; i < 3; i++) { ++ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; ++ *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); ++ } ++ ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); ++ ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, ++ SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, ++ SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, ++ SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, ++ SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, ++ SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, ++ SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, ++ SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, ++ SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, ++ SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, ++ SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, ++ SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, ++ SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, ++ SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, ++ SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, ++ SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, ++ SSB_SPROM4_TXPID5GH3_SHIFT); ++ ++ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); ++ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); ++ ++ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); ++ ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ ++ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, ++ SSB_SROM8_FEM_TSSIPOS_SHIFT); ++ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, ++ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); ++ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, ++ SSB_SROM8_FEM_PDET_RANGE_SHIFT); ++ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, ++ SSB_SROM8_FEM_TR_ISO_SHIFT); ++ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, ++ SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, ++ SSB_SPROM8_ANTAVAIL_A_SHIFT); ++ SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, ++ SSB_SPROM8_ANTAVAIL_BG_SHIFT); ++ SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0); ++ SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG, ++ SSB_SPROM8_ITSSI_BG_SHIFT); ++ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); ++ SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, ++ SSB_SPROM8_ITSSI_A_SHIFT); ++ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); ++ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, ++ SSB_SPROM8_MAXP_AL_SHIFT); ++ SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); ++ SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, ++ SSB_SPROM8_GPIOA_P1_SHIFT); ++ SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); ++ SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, ++ SSB_SPROM8_GPIOB_P3_SHIFT); ++ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); ++ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, ++ SSB_SPROM8_TRI5G_SHIFT); ++ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); ++ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, ++ SSB_SPROM8_TRI5GH_SHIFT); ++ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, ++ SSB_SPROM8_RXPO2G_SHIFT); ++ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, ++ SSB_SPROM8_RXPO5G_SHIFT); ++ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); ++ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, ++ SSB_SPROM8_RSSISMC2G_SHIFT); ++ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, ++ SSB_SPROM8_RSSISAV2G_SHIFT); ++ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, ++ SSB_SPROM8_BXA2G_SHIFT); ++ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); ++ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, ++ SSB_SPROM8_RSSISMC5G_SHIFT); ++ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, ++ SSB_SPROM8_RSSISAV5G_SHIFT); ++ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, ++ SSB_SPROM8_BXA5G_SHIFT); ++ ++ SPEX(pa0b0, SSB_SPROM8_PA0B0, ~0, 0); ++ SPEX(pa0b1, SSB_SPROM8_PA0B1, ~0, 0); ++ SPEX(pa0b2, SSB_SPROM8_PA0B2, ~0, 0); ++ SPEX(pa1b0, SSB_SPROM8_PA1B0, ~0, 0); ++ SPEX(pa1b1, SSB_SPROM8_PA1B1, ~0, 0); ++ SPEX(pa1b2, SSB_SPROM8_PA1B2, ~0, 0); ++ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, ~0, 0); ++ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, ~0, 0); ++ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, ~0, 0); ++ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, ~0, 0); ++ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, ~0, 0); ++ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, ~0, 0); ++ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, ~0, 0); ++ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, ~0, 0); ++ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, ~0, 0); ++ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, ~0, 0); ++ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, ~0, 0); ++ ++ /* Extract the antenna gain values. */ ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, ++ SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, ++ SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, ++ SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, ++ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); ++ ++ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON, ++ SSB_SPROM8_LEDDC_ON_SHIFT); ++ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF, ++ SSB_SPROM8_LEDDC_OFF_SHIFT); ++ ++ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN, ++ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT); ++ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN, ++ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT); ++ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH, ++ SSB_SPROM8_TXRXC_SWITCH_SHIFT); ++ ++ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0); ++ ++ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0); ++ ++ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP, ++ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT); ++ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER, ++ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT); ++ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT); ++ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX, ++ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT); ++ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT); ++ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT); ++ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT); ++ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL, ++ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT); ++ ++ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0); ++ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0); ++ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0); ++ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0); ++ ++ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH, ++ SSB_SPROM8_THERMAL_TRESH_SHIFT); ++ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET, ++ SSB_SPROM8_THERMAL_OFFSET_SHIFT); ++ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_PHYCAL, ++ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT); ++ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD, ++ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT); ++ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT); ++} ++ ++/* ++ * Indicates the presence of external SPROM. ++ */ ++static bool bcma_sprom_ext_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 srom_control; ++ u32 present_mask; ++ ++ if (bus->drv_cc.core->id.rev >= 31) { ++ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) ++ return false; ++ ++ srom_control = bcma_read32(bus->drv_cc.core, ++ BCMA_CC_SROM_CONTROL); ++ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; ++ } ++ ++ /* older chipcommon revisions use chip status register */ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; ++ break; ++ ++ case 0x4331: ++ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; ++ break; ++ ++ default: ++ return true; ++ } ++ ++ return chip_status & present_mask; ++} ++ ++/* ++ * Indicates that on-chip OTP memory is present and enabled. ++ */ ++static bool bcma_sprom_onchip_available(struct bcma_bus *bus) ++{ ++ u32 chip_status; ++ u32 otpsize = 0; ++ bool present; ++ ++ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); ++ switch (bus->chipinfo.id) { ++ case 0x4313: ++ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; ++ break; ++ ++ case 0x4331: ++ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; ++ break; ++ ++ case 43224: ++ case 43225: ++ /* for these chips OTP is always available */ ++ present = true; ++ break; ++ ++ default: ++ present = false; ++ break; ++ } ++ ++ if (present) { ++ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; ++ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; ++ } ++ ++ return otpsize != 0; ++} ++ ++/* ++ * Verify OTP is filled and determine the byte ++ * offset where SPROM data is located. ++ * ++ * On error, returns 0; byte offset otherwise. ++ */ ++static int bcma_sprom_onchip_offset(struct bcma_bus *bus) ++{ ++ struct bcma_device *cc = bus->drv_cc.core; ++ u32 offset; ++ ++ /* verify OTP status */ ++ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) ++ return 0; ++ ++ /* obtain bit offset from otplayout register */ ++ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); ++ return BCMA_CC_SPROM + (offset >> 3); ++} ++ ++int bcma_sprom_get(struct bcma_bus *bus) ++{ ++ u16 offset = BCMA_CC_SPROM; ++ u16 *sprom; ++ int err = 0; ++ ++ if (!bus->drv_cc.core) ++ return -EOPNOTSUPP; ++ ++ if (!bcma_sprom_ext_available(bus)) { ++ bool sprom_onchip; ++ ++ /* ++ * External SPROM takes precedence so check ++ * on-chip OTP only when no external SPROM ++ * is present. ++ */ ++ sprom_onchip = bcma_sprom_onchip_available(bus); ++ if (sprom_onchip) { ++ /* determine offset */ ++ offset = bcma_sprom_onchip_offset(bus); ++ } ++ if (!offset || !sprom_onchip) { ++ /* ++ * Maybe there is no SPROM on the device? ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage. ++ */ ++ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); ++ return err; ++ } ++ } ++ ++ sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), ++ GFP_KERNEL); ++ if (!sprom) ++ return -ENOMEM; ++ ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); ++ ++ pr_debug("SPROM offset 0x%x\n", offset); ++ bcma_sprom_read(bus, offset, sprom); ++ ++ if (bus->chipinfo.id == 0x4331) ++ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); ++ ++ err = bcma_sprom_valid(sprom); ++ if (err) ++ goto out; ++ ++ bcma_sprom_extract_r8(bus, sprom); ++ ++out: ++ kfree(sprom); ++ return err; ++} +--- /dev/null +++ b/include/linux/bcma/bcma.h -@@ -0,0 +1,307 @@ +@@ -0,0 +1,314 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + @@ -2346,6 +4064,11 @@ + u8 pkg; +}; + ++struct bcma_boardinfo { ++ u16 vendor; ++ u16 type; ++}; ++ +enum bcma_clkmode { + BCMA_CLKMODE_FAST, + BCMA_CLKMODE_DYNAMIC, @@ -2518,6 +4241,8 @@ + + struct bcma_chipinfo chipinfo; + ++ struct bcma_boardinfo boardinfo; ++ + struct bcma_device *mapped_core; + struct list_head cores; + u8 nr_cores; @@ -3044,8 +4769,62 @@ + +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ --- /dev/null ++++ b/include/linux/bcma/bcma_driver_mips.h +@@ -0,0 +1,51 @@ ++#ifndef LINUX_BCMA_DRIVER_MIPS_H_ ++#define LINUX_BCMA_DRIVER_MIPS_H_ ++ ++#define BCMA_MIPS_IPSFLAG 0x0F08 ++/* which sbflags get routed to mips interrupt 1 */ ++#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F ++#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 ++/* which sbflags get routed to mips interrupt 2 */ ++#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 ++#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 ++/* which sbflags get routed to mips interrupt 3 */ ++#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 ++#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 ++/* which sbflags get routed to mips interrupt 4 */ ++#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 ++#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 ++ ++/* MIPS 74K core registers */ ++#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 ++#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 ++#define BCMA_MIPS_MIPS74K_BIST 0x000C ++#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 ++#define BCMA_MIPS_MIPS74K_INTMASK(int) \ ++ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) ++#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C ++#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 ++#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 ++#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 ++#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 ++ ++#define BCMA_MIPS_OOBSELOUTA30 0x100 ++ ++struct bcma_device; ++ ++struct bcma_drv_mips { ++ struct bcma_device *core; ++ u8 setup_done:1; ++ unsigned int assigned_irqs; ++}; ++ ++#ifdef CONFIG_BCMA_DRIVER_MIPS ++extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); ++#else ++static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } ++#endif ++ ++extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); ++ ++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); ++ ++#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ +--- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -0,0 +1,214 @@ +@@ -0,0 +1,225 @@ +#ifndef LINUX_BCMA_DRIVER_PCI_H_ +#define LINUX_BCMA_DRIVER_PCI_H_ + @@ -3135,6 +4914,13 @@ +#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */ +#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */ ++#define BCMA_CORE_PCI_SPROM_PI_OFFSET 0 /* first word */ ++#define BCMA_CORE_PCI_SPROM_PI_MASK 0xf000 /* bit 15:12 */ ++#define BCMA_CORE_PCI_SPROM_PI_SHIFT 12 /* bit 15:12 */ ++#define BCMA_CORE_PCI_SPROM_MISC_CONFIG 5 /* word 5 */ ++#define BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */ ++#define BCMA_CORE_PCI_SPROM_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */ ++#define BCMA_CORE_PCI_SPROM_CLKREQ_ENB 0x0800 /* bit 11 */ + +/* SBtoPCIx */ +#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000 @@ -3181,6 +4967,7 @@ +#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ +#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ +#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_ASPMTIMER_EXTEND 0x01000000 /* > rev7: enable extend ASPM timer */ +#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ @@ -3249,12 +5036,15 @@ +}; + +/* Register access */ ++#define pcicore_read16(pc, offset) bcma_read16((pc)->core, offset) +#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) ++#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val) +#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + +extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); +extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, + struct bcma_device *core, bool enable); ++extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); + +extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); +extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); @@ -3349,6 +5139,25 @@ + */ + +#endif /* LINUX_BCMA_REGS_H_ */ +--- /dev/null ++++ b/include/linux/bcma/bcma_soc.h +@@ -0,0 +1,16 @@ ++#ifndef LINUX_BCMA_SOC_H_ ++#define LINUX_BCMA_SOC_H_ ++ ++#include <linux/bcma/bcma.h> ++ ++struct bcma_soc { ++ struct bcma_bus bus; ++ struct bcma_device core_cc; ++ struct bcma_device core_mips; ++}; ++ ++int __init bcma_host_soc_register(struct bcma_soc *soc); ++ ++int bcma_bus_register(struct bcma_bus *bus); ++ ++#endif /* LINUX_BCMA_SOC_H_ */ --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -382,6 +382,23 @@ struct ssb_device_id { @@ -3413,1566 +5222,3 @@ else if (sym_is(symname, "__mod_virtio_device_table")) do_table(symval, sym->st_size, sizeof(struct virtio_device_id), "virtio", ---- /dev/null -+++ b/drivers/bcma/sprom.c -@@ -0,0 +1,450 @@ -+/* -+ * Broadcom specific AMBA -+ * SPROM reading -+ * -+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include "bcma_private.h" -+ -+#include <linux/bcma/bcma.h> -+#include <linux/bcma/bcma_regs.h> -+#include <linux/pci.h> -+#include <linux/io.h> -+#include <linux/dma-mapping.h> -+#include <linux/slab.h> -+ -+static int(*get_fallback_sprom)(struct bcma_bus *dev, struct ssb_sprom *out); -+ -+/** -+ * bcma_arch_register_fallback_sprom - Registers a method providing a -+ * fallback SPROM if no SPROM is found. -+ * -+ * @sprom_callback: The callback function. -+ * -+ * With this function the architecture implementation may register a -+ * callback handler which fills the SPROM data structure. The fallback is -+ * used for PCI based BCMA devices, where no valid SPROM can be found -+ * in the shadow registers and to provide the SPROM for SoCs where BCMA is -+ * to controll the system bus. -+ * -+ * This function is useful for weird architectures that have a half-assed -+ * BCMA device hardwired to their PCI bus. -+ * -+ * This function is available for architecture code, only. So it is not -+ * exported. -+ */ -+int bcma_arch_register_fallback_sprom(int (*sprom_callback)(struct bcma_bus *bus, -+ struct ssb_sprom *out)) -+{ -+ if (get_fallback_sprom) -+ return -EEXIST; -+ get_fallback_sprom = sprom_callback; -+ -+ return 0; -+} -+ -+static int bcma_fill_sprom_with_fallback(struct bcma_bus *bus, -+ struct ssb_sprom *out) -+{ -+ int err; -+ -+ if (!get_fallback_sprom) { -+ err = -ENOENT; -+ goto fail; -+ } -+ -+ err = get_fallback_sprom(bus, out); -+ if (err) -+ goto fail; -+ -+ pr_debug("Using SPROM revision %d provided by" -+ " platform.\n", bus->sprom.revision); -+ return 0; -+fail: -+ pr_warn("Using fallback SPROM failed (err %d)\n", err); -+ return err; -+} -+ -+/************************************************** -+ * R/W ops. -+ **************************************************/ -+ -+static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom) -+{ -+ int i; -+ for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++) -+ sprom[i] = bcma_read16(bus->drv_cc.core, -+ offset + (i * 2)); -+} -+ -+/************************************************** -+ * Validation. -+ **************************************************/ -+ -+static inline u8 bcma_crc8(u8 crc, u8 data) -+{ -+ /* Polynomial: x^8 + x^7 + x^6 + x^4 + x^2 + 1 */ -+ static const u8 t[] = { -+ 0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B, -+ 0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21, -+ 0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF, -+ 0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5, -+ 0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14, -+ 0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E, -+ 0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80, -+ 0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA, -+ 0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95, -+ 0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF, -+ 0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01, -+ 0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B, -+ 0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA, -+ 0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0, -+ 0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E, -+ 0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34, -+ 0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0, -+ 0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A, -+ 0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54, -+ 0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E, -+ 0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF, -+ 0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5, -+ 0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B, -+ 0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61, -+ 0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E, -+ 0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74, -+ 0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA, -+ 0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0, -+ 0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41, -+ 0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B, -+ 0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5, -+ 0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F, -+ }; -+ return t[crc ^ data]; -+} -+ -+static u8 bcma_sprom_crc(const u16 *sprom) -+{ -+ int word; -+ u8 crc = 0xFF; -+ -+ for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) { -+ crc = bcma_crc8(crc, sprom[word] & 0x00FF); -+ crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8); -+ } -+ crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF); -+ crc ^= 0xFF; -+ -+ return crc; -+} -+ -+static int bcma_sprom_check_crc(const u16 *sprom) -+{ -+ u8 crc; -+ u8 expected_crc; -+ u16 tmp; -+ -+ crc = bcma_sprom_crc(sprom); -+ tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC; -+ expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT; -+ if (crc != expected_crc) -+ return -EPROTO; -+ -+ return 0; -+} -+ -+static int bcma_sprom_valid(const u16 *sprom) -+{ -+ u16 revision; -+ int err; -+ -+ err = bcma_sprom_check_crc(sprom); -+ if (err) -+ return err; -+ -+ revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV; -+ if (revision != 8 && revision != 9) { -+ pr_err("Unsupported SPROM revision: %d\n", revision); -+ return -ENOENT; -+ } -+ -+ return 0; -+} -+ -+/************************************************** -+ * SPROM extraction. -+ **************************************************/ -+ -+#define SPOFF(offset) ((offset) / sizeof(u16)) -+ -+#define SPEX(_field, _offset, _mask, _shift) \ -+ bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) -+ -+static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) -+{ -+ u16 v, o; -+ int i; -+ u16 pwr_info_offset[] = { -+ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, -+ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 -+ }; -+ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != -+ ARRAY_SIZE(bus->sprom.core_pwr_info)); -+ -+ bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & -+ SSB_SPROM_REVISION_REV; -+ -+ for (i = 0; i < 3; i++) { -+ v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i]; -+ *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); -+ } -+ -+ SPEX(board_rev, SSB_SPROM8_BOARDREV, ~0, 0); -+ -+ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G0, -+ SSB_SPROM4_TXPID2G0_SHIFT); -+ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, SSB_SPROM4_TXPID2G1, -+ SSB_SPROM4_TXPID2G1_SHIFT); -+ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G2, -+ SSB_SPROM4_TXPID2G2_SHIFT); -+ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, SSB_SPROM4_TXPID2G3, -+ SSB_SPROM4_TXPID2G3_SHIFT); -+ -+ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL0, -+ SSB_SPROM4_TXPID5GL0_SHIFT); -+ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, SSB_SPROM4_TXPID5GL1, -+ SSB_SPROM4_TXPID5GL1_SHIFT); -+ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL2, -+ SSB_SPROM4_TXPID5GL2_SHIFT); -+ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, SSB_SPROM4_TXPID5GL3, -+ SSB_SPROM4_TXPID5GL3_SHIFT); -+ -+ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G0, -+ SSB_SPROM4_TXPID5G0_SHIFT); -+ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, SSB_SPROM4_TXPID5G1, -+ SSB_SPROM4_TXPID5G1_SHIFT); -+ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G2, -+ SSB_SPROM4_TXPID5G2_SHIFT); -+ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, SSB_SPROM4_TXPID5G3, -+ SSB_SPROM4_TXPID5G3_SHIFT); -+ -+ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH0, -+ SSB_SPROM4_TXPID5GH0_SHIFT); -+ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, SSB_SPROM4_TXPID5GH1, -+ SSB_SPROM4_TXPID5GH1_SHIFT); -+ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH2, -+ SSB_SPROM4_TXPID5GH2_SHIFT); -+ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, SSB_SPROM4_TXPID5GH3, -+ SSB_SPROM4_TXPID5GH3_SHIFT); -+ -+ SPEX(boardflags_lo, SSB_SPROM8_BFLLO, ~0, 0); -+ SPEX(boardflags_hi, SSB_SPROM8_BFLHI, ~0, 0); -+ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); -+ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); -+ -+ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); -+ -+ /* Extract cores power info info */ -+ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { -+ o = pwr_info_offset[i]; -+ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, -+ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); -+ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, -+ SSB_SPROM8_2G_MAXP, 0); -+ -+ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); -+ -+ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, -+ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); -+ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, -+ SSB_SPROM8_5G_MAXP, 0); -+ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, -+ SSB_SPROM8_5GH_MAXP, 0); -+ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, -+ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); -+ -+ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); -+ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); -+ } -+ -+ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TSSIPOS, -+ SSB_SROM8_FEM_TSSIPOS_SHIFT); -+ SPEX(fem.ghz2.extpa_gain, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_EXTPA_GAIN, -+ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); -+ SPEX(fem.ghz2.pdet_range, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_PDET_RANGE, -+ SSB_SROM8_FEM_PDET_RANGE_SHIFT); -+ SPEX(fem.ghz2.tr_iso, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_TR_ISO, -+ SSB_SROM8_FEM_TR_ISO_SHIFT); -+ SPEX(fem.ghz2.antswlut, SSB_SPROM8_FEM2G, SSB_SROM8_FEM_ANTSWLUT, -+ SSB_SROM8_FEM_ANTSWLUT_SHIFT); -+ -+ SPEX(fem.ghz5.tssipos, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TSSIPOS, -+ SSB_SROM8_FEM_TSSIPOS_SHIFT); -+ SPEX(fem.ghz5.extpa_gain, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_EXTPA_GAIN, -+ SSB_SROM8_FEM_EXTPA_GAIN_SHIFT); -+ SPEX(fem.ghz5.pdet_range, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_PDET_RANGE, -+ SSB_SROM8_FEM_PDET_RANGE_SHIFT); -+ SPEX(fem.ghz5.tr_iso, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_TR_ISO, -+ SSB_SROM8_FEM_TR_ISO_SHIFT); -+ SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, -+ SSB_SROM8_FEM_ANTSWLUT_SHIFT); -+} -+ -+/* -+ * Indicates the presence of external SPROM. -+ */ -+static bool bcma_sprom_ext_available(struct bcma_bus *bus) -+{ -+ u32 chip_status; -+ u32 srom_control; -+ u32 present_mask; -+ -+ if (bus->drv_cc.core->id.rev >= 31) { -+ if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) -+ return false; -+ -+ srom_control = bcma_read32(bus->drv_cc.core, -+ BCMA_CC_SROM_CONTROL); -+ return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; -+ } -+ -+ /* older chipcommon revisions use chip status register */ -+ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); -+ switch (bus->chipinfo.id) { -+ case 0x4313: -+ present_mask = BCMA_CC_CHIPST_4313_SPROM_PRESENT; -+ break; -+ -+ case 0x4331: -+ present_mask = BCMA_CC_CHIPST_4331_SPROM_PRESENT; -+ break; -+ -+ default: -+ return true; -+ } -+ -+ return chip_status & present_mask; -+} -+ -+/* -+ * Indicates that on-chip OTP memory is present and enabled. -+ */ -+static bool bcma_sprom_onchip_available(struct bcma_bus *bus) -+{ -+ u32 chip_status; -+ u32 otpsize = 0; -+ bool present; -+ -+ chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); -+ switch (bus->chipinfo.id) { -+ case 0x4313: -+ present = chip_status & BCMA_CC_CHIPST_4313_OTP_PRESENT; -+ break; -+ -+ case 0x4331: -+ present = chip_status & BCMA_CC_CHIPST_4331_OTP_PRESENT; -+ break; -+ -+ case 43224: -+ case 43225: -+ /* for these chips OTP is always available */ -+ present = true; -+ break; -+ -+ default: -+ present = false; -+ break; -+ } -+ -+ if (present) { -+ otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; -+ otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; -+ } -+ -+ return otpsize != 0; -+} -+ -+/* -+ * Verify OTP is filled and determine the byte -+ * offset where SPROM data is located. -+ * -+ * On error, returns 0; byte offset otherwise. -+ */ -+static int bcma_sprom_onchip_offset(struct bcma_bus *bus) -+{ -+ struct bcma_device *cc = bus->drv_cc.core; -+ u32 offset; -+ -+ /* verify OTP status */ -+ if ((bcma_read32(cc, BCMA_CC_OTPS) & BCMA_CC_OTPS_GU_PROG_HW) == 0) -+ return 0; -+ -+ /* obtain bit offset from otplayout register */ -+ offset = (bcma_read32(cc, BCMA_CC_OTPL) & BCMA_CC_OTPL_GURGN_OFFSET); -+ return BCMA_CC_SPROM + (offset >> 3); -+} -+ -+int bcma_sprom_get(struct bcma_bus *bus) -+{ -+ u16 offset = BCMA_CC_SPROM; -+ u16 *sprom; -+ int err = 0; -+ -+ if (!bus->drv_cc.core) -+ return -EOPNOTSUPP; -+ -+ if (!bcma_sprom_ext_available(bus)) { -+ /* -+ * External SPROM takes precedence so check -+ * on-chip OTP only when no external SPROM -+ * is present. -+ */ -+ if (bcma_sprom_onchip_available(bus)) { -+ /* determine offset */ -+ offset = bcma_sprom_onchip_offset(bus); -+ } -+ if (!offset) { -+ /* -+ * Maybe there is no SPROM on the device? -+ * Now we ask the arch code if there is some sprom -+ * available for this device in some other storage. -+ */ -+ err = bcma_fill_sprom_with_fallback(bus, &bus->sprom); -+ return err; -+ } -+ } -+ -+ sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), -+ GFP_KERNEL); -+ if (!sprom) -+ return -ENOMEM; -+ -+ if (bus->chipinfo.id == 0x4331) -+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); -+ -+ pr_debug("SPROM offset 0x%x\n", offset); -+ bcma_sprom_read(bus, offset, sprom); -+ -+ if (bus->chipinfo.id == 0x4331) -+ bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true); -+ -+ err = bcma_sprom_valid(sprom); -+ if (err) -+ goto out; -+ -+ bcma_sprom_extract_r8(bus, sprom); -+ -+out: -+ kfree(sprom); -+ return err; -+} ---- /dev/null -+++ b/drivers/bcma/driver_pci_host.c -@@ -0,0 +1,589 @@ -+/* -+ * Broadcom specific AMBA -+ * PCI Core in hostmode -+ * -+ * Copyright 2005 - 2011, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch> -+ * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include "bcma_private.h" -+#include <linux/pci.h> -+#include <linux/export.h> -+#include <linux/bcma/bcma.h> -+#include <asm/paccess.h> -+ -+/* Probe a 32bit value on the bus and catch bus exceptions. -+ * Returns nonzero on a bus exception. -+ * This is MIPS specific */ -+#define mips_busprobe32(val, addr) get_dbe((val), ((u32 *)(addr))) -+ -+/* Assume one-hot slot wiring */ -+#define BCMA_PCI_SLOT_MAX 16 -+#define PCI_CONFIG_SPACE_SIZE 256 -+ -+bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ u16 chipid_top; -+ u32 tmp; -+ -+ chipid_top = (bus->chipinfo.id & 0xFF00); -+ if (chipid_top != 0x4700 && -+ chipid_top != 0x5300) -+ return false; -+ -+ if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) { -+ pr_info("This PCI core is disabled and not working\n"); -+ return false; -+ } -+ -+ bcma_core_enable(pc->core, 0); -+ -+ return !mips_busprobe32(tmp, pc->core->io_addr); -+} -+ -+static u32 bcma_pcie_read_config(struct bcma_drv_pci *pc, u32 address) -+{ -+ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); -+ return pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_DATA); -+} -+ -+static void bcma_pcie_write_config(struct bcma_drv_pci *pc, u32 address, -+ u32 data) -+{ -+ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_ADDR, address); -+ pcicore_read32(pc, BCMA_CORE_PCI_CONFIG_ADDR); -+ pcicore_write32(pc, BCMA_CORE_PCI_CONFIG_DATA, data); -+} -+ -+static u32 bcma_get_cfgspace_addr(struct bcma_drv_pci *pc, unsigned int dev, -+ unsigned int func, unsigned int off) -+{ -+ u32 addr = 0; -+ -+ /* Issue config commands only when the data link is up (atleast -+ * one external pcie device is present). -+ */ -+ if (dev >= 2 || !(bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_LSREG) -+ & BCMA_CORE_PCI_DLLP_LSREG_LINKUP)) -+ goto out; -+ -+ /* Type 0 transaction */ -+ /* Slide the PCI window to the appropriate slot */ -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); -+ /* Calculate the address */ -+ addr = pc->host_controller->host_cfg_addr; -+ addr |= (dev << BCMA_CORE_PCI_CFG_SLOT_SHIFT); -+ addr |= (func << BCMA_CORE_PCI_CFG_FUN_SHIFT); -+ addr |= (off & ~3); -+ -+out: -+ return addr; -+} -+ -+static int bcma_extpci_read_config(struct bcma_drv_pci *pc, unsigned int dev, -+ unsigned int func, unsigned int off, -+ void *buf, int len) -+{ -+ int err = -EINVAL; -+ u32 addr, val; -+ void __iomem *mmio = 0; -+ -+ WARN_ON(!pc->hostmode); -+ if (unlikely(len != 1 && len != 2 && len != 4)) -+ goto out; -+ if (dev == 0) { -+ /* we support only two functions on device 0 */ -+ if (func > 1) -+ return -EINVAL; -+ -+ /* accesses to config registers with offsets >= 256 -+ * requires indirect access. -+ */ -+ if (off >= PCI_CONFIG_SPACE_SIZE) { -+ addr = (func << 12); -+ addr |= (off & 0x0FFF); -+ val = bcma_pcie_read_config(pc, addr); -+ } else { -+ addr = BCMA_CORE_PCI_PCICFG0; -+ addr |= (func << 8); -+ addr |= (off & 0xfc); -+ val = pcicore_read32(pc, addr); -+ } -+ } else { -+ addr = bcma_get_cfgspace_addr(pc, dev, func, off); -+ if (unlikely(!addr)) -+ goto out; -+ err = -ENOMEM; -+ mmio = ioremap_nocache(addr, len); -+ if (!mmio) -+ goto out; -+ -+ if (mips_busprobe32(val, mmio)) { -+ val = 0xffffffff; -+ goto unmap; -+ } -+ -+ val = readl(mmio); -+ } -+ val >>= (8 * (off & 3)); -+ -+ switch (len) { -+ case 1: -+ *((u8 *)buf) = (u8)val; -+ break; -+ case 2: -+ *((u16 *)buf) = (u16)val; -+ break; -+ case 4: -+ *((u32 *)buf) = (u32)val; -+ break; -+ } -+ err = 0; -+unmap: -+ if (mmio) -+ iounmap(mmio); -+out: -+ return err; -+} -+ -+static int bcma_extpci_write_config(struct bcma_drv_pci *pc, unsigned int dev, -+ unsigned int func, unsigned int off, -+ const void *buf, int len) -+{ -+ int err = -EINVAL; -+ u32 addr = 0, val = 0; -+ void __iomem *mmio = 0; -+ u16 chipid = pc->core->bus->chipinfo.id; -+ -+ WARN_ON(!pc->hostmode); -+ if (unlikely(len != 1 && len != 2 && len != 4)) -+ goto out; -+ if (dev == 0) { -+ /* accesses to config registers with offsets >= 256 -+ * requires indirect access. -+ */ -+ if (off < PCI_CONFIG_SPACE_SIZE) { -+ addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; -+ addr |= (func << 8); -+ addr |= (off & 0xfc); -+ mmio = ioremap_nocache(addr, len); -+ if (!mmio) -+ goto out; -+ } -+ } else { -+ addr = bcma_get_cfgspace_addr(pc, dev, func, off); -+ if (unlikely(!addr)) -+ goto out; -+ err = -ENOMEM; -+ mmio = ioremap_nocache(addr, len); -+ if (!mmio) -+ goto out; -+ -+ if (mips_busprobe32(val, mmio)) { -+ val = 0xffffffff; -+ goto unmap; -+ } -+ } -+ -+ switch (len) { -+ case 1: -+ val = readl(mmio); -+ val &= ~(0xFF << (8 * (off & 3))); -+ val |= *((const u8 *)buf) << (8 * (off & 3)); -+ break; -+ case 2: -+ val = readl(mmio); -+ val &= ~(0xFFFF << (8 * (off & 3))); -+ val |= *((const u16 *)buf) << (8 * (off & 3)); -+ break; -+ case 4: -+ val = *((const u32 *)buf); -+ break; -+ } -+ if (dev == 0 && !addr) { -+ /* accesses to config registers with offsets >= 256 -+ * requires indirect access. -+ */ -+ addr = (func << 12); -+ addr |= (off & 0x0FFF); -+ bcma_pcie_write_config(pc, addr, val); -+ } else { -+ writel(val, mmio); -+ -+ if (chipid == 0x4716 || chipid == 0x4748) -+ readl(mmio); -+ } -+ -+ err = 0; -+unmap: -+ if (mmio) -+ iounmap(mmio); -+out: -+ return err; -+} -+ -+static int bcma_core_pci_hostmode_read_config(struct pci_bus *bus, -+ unsigned int devfn, -+ int reg, int size, u32 *val) -+{ -+ unsigned long flags; -+ int err; -+ struct bcma_drv_pci *pc; -+ struct bcma_drv_pci_host *pc_host; -+ -+ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); -+ pc = pc_host->pdev; -+ -+ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); -+ err = bcma_extpci_read_config(pc, PCI_SLOT(devfn), -+ PCI_FUNC(devfn), reg, val, size); -+ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); -+ -+ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+static int bcma_core_pci_hostmode_write_config(struct pci_bus *bus, -+ unsigned int devfn, -+ int reg, int size, u32 val) -+{ -+ unsigned long flags; -+ int err; -+ struct bcma_drv_pci *pc; -+ struct bcma_drv_pci_host *pc_host; -+ -+ pc_host = container_of(bus->ops, struct bcma_drv_pci_host, pci_ops); -+ pc = pc_host->pdev; -+ -+ spin_lock_irqsave(&pc_host->cfgspace_lock, flags); -+ err = bcma_extpci_write_config(pc, PCI_SLOT(devfn), -+ PCI_FUNC(devfn), reg, &val, size); -+ spin_unlock_irqrestore(&pc_host->cfgspace_lock, flags); -+ -+ return err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -+} -+ -+/* return cap_offset if requested capability exists in the PCI config space */ -+static u8 __devinit bcma_find_pci_capability(struct bcma_drv_pci *pc, -+ unsigned int dev, -+ unsigned int func, u8 req_cap_id, -+ unsigned char *buf, u32 *buflen) -+{ -+ u8 cap_id; -+ u8 cap_ptr = 0; -+ u32 bufsize; -+ u8 byte_val; -+ -+ /* check for Header type 0 */ -+ bcma_extpci_read_config(pc, dev, func, PCI_HEADER_TYPE, &byte_val, -+ sizeof(u8)); -+ if ((byte_val & 0x7f) != PCI_HEADER_TYPE_NORMAL) -+ return cap_ptr; -+ -+ /* check if the capability pointer field exists */ -+ bcma_extpci_read_config(pc, dev, func, PCI_STATUS, &byte_val, -+ sizeof(u8)); -+ if (!(byte_val & PCI_STATUS_CAP_LIST)) -+ return cap_ptr; -+ -+ /* check if the capability pointer is 0x00 */ -+ bcma_extpci_read_config(pc, dev, func, PCI_CAPABILITY_LIST, &cap_ptr, -+ sizeof(u8)); -+ if (cap_ptr == 0x00) -+ return cap_ptr; -+ -+ /* loop thr'u the capability list and see if the requested capabilty -+ * exists */ -+ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, sizeof(u8)); -+ while (cap_id != req_cap_id) { -+ bcma_extpci_read_config(pc, dev, func, cap_ptr + 1, &cap_ptr, -+ sizeof(u8)); -+ if (cap_ptr == 0x00) -+ return cap_ptr; -+ bcma_extpci_read_config(pc, dev, func, cap_ptr, &cap_id, -+ sizeof(u8)); -+ } -+ -+ /* found the caller requested capability */ -+ if ((buf != NULL) && (buflen != NULL)) { -+ u8 cap_data; -+ -+ bufsize = *buflen; -+ if (!bufsize) -+ return cap_ptr; -+ -+ *buflen = 0; -+ -+ /* copy the cpability data excluding cap ID and next ptr */ -+ cap_data = cap_ptr + 2; -+ if ((bufsize + cap_data) > PCI_CONFIG_SPACE_SIZE) -+ bufsize = PCI_CONFIG_SPACE_SIZE - cap_data; -+ *buflen = bufsize; -+ while (bufsize--) { -+ bcma_extpci_read_config(pc, dev, func, cap_data, buf, -+ sizeof(u8)); -+ cap_data++; -+ buf++; -+ } -+ } -+ -+ return cap_ptr; -+} -+ -+/* If the root port is capable of returning Config Request -+ * Retry Status (CRS) Completion Status to software then -+ * enable the feature. -+ */ -+static void __devinit bcma_core_pci_enable_crs(struct bcma_drv_pci *pc) -+{ -+ u8 cap_ptr, root_ctrl, root_cap, dev; -+ u16 val16; -+ int i; -+ -+ cap_ptr = bcma_find_pci_capability(pc, 0, 0, PCI_CAP_ID_EXP, NULL, -+ NULL); -+ root_cap = cap_ptr + PCI_EXP_RTCAP; -+ bcma_extpci_read_config(pc, 0, 0, root_cap, &val16, sizeof(u16)); -+ if (val16 & BCMA_CORE_PCI_RC_CRS_VISIBILITY) { -+ /* Enable CRS software visibility */ -+ root_ctrl = cap_ptr + PCI_EXP_RTCTL; -+ val16 = PCI_EXP_RTCTL_CRSSVE; -+ bcma_extpci_read_config(pc, 0, 0, root_ctrl, &val16, -+ sizeof(u16)); -+ -+ /* Initiate a configuration request to read the vendor id -+ * field of the device function's config space header after -+ * 100 ms wait time from the end of Reset. If the device is -+ * not done with its internal initialization, it must at -+ * least return a completion TLP, with a completion status -+ * of "Configuration Request Retry Status (CRS)". The root -+ * complex must complete the request to the host by returning -+ * a read-data value of 0001h for the Vendor ID field and -+ * all 1s for any additional bytes included in the request. -+ * Poll using the config reads for max wait time of 1 sec or -+ * until we receive the successful completion status. Repeat -+ * the procedure for all the devices. -+ */ -+ for (dev = 1; dev < BCMA_PCI_SLOT_MAX; dev++) { -+ for (i = 0; i < 100000; i++) { -+ bcma_extpci_read_config(pc, dev, 0, -+ PCI_VENDOR_ID, &val16, -+ sizeof(val16)); -+ if (val16 != 0x1) -+ break; -+ udelay(10); -+ } -+ if (val16 == 0x1) -+ pr_err("PCI: Broken device in slot %d\n", dev); -+ } -+ } -+} -+ -+void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc) -+{ -+ struct bcma_bus *bus = pc->core->bus; -+ struct bcma_drv_pci_host *pc_host; -+ u32 tmp; -+ u32 pci_membase_1G; -+ unsigned long io_map_base; -+ -+ pr_info("PCIEcore in host mode found\n"); -+ -+ pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL); -+ if (!pc_host) { -+ pr_err("can not allocate memory"); -+ return; -+ } -+ -+ pc->host_controller = pc_host; -+ pc_host->pci_controller.io_resource = &pc_host->io_resource; -+ pc_host->pci_controller.mem_resource = &pc_host->mem_resource; -+ pc_host->pci_controller.pci_ops = &pc_host->pci_ops; -+ pc_host->pdev = pc; -+ -+ pci_membase_1G = BCMA_SOC_PCI_DMA; -+ pc_host->host_cfg_addr = BCMA_SOC_PCI_CFG; -+ -+ pc_host->pci_ops.read = bcma_core_pci_hostmode_read_config; -+ pc_host->pci_ops.write = bcma_core_pci_hostmode_write_config; -+ -+ pc_host->mem_resource.name = "BCMA PCIcore external memory", -+ pc_host->mem_resource.start = BCMA_SOC_PCI_DMA; -+ pc_host->mem_resource.end = BCMA_SOC_PCI_DMA + BCMA_SOC_PCI_DMA_SZ - 1; -+ pc_host->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; -+ -+ pc_host->io_resource.name = "BCMA PCIcore external I/O", -+ pc_host->io_resource.start = 0x100; -+ pc_host->io_resource.end = 0x7FF; -+ pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; -+ -+ /* Reset RC */ -+ udelay(3000); -+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE); -+ udelay(1000); -+ pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST | -+ BCMA_CORE_PCI_CTL_RST_OE); -+ -+ /* 64 MB I/O access window. On 4716, use -+ * sbtopcie0 to access the device registers. We -+ * can't use address match 2 (1 GB window) region -+ * as mips can't generate 64-bit address on the -+ * backplane. -+ */ -+ if (bus->chipinfo.id == 0x4716 || bus->chipinfo.id == 0x4748) { -+ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; -+ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + -+ BCMA_SOC_PCI_MEM_SZ - 1; -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ BCMA_CORE_PCI_SBTOPCI_MEM | BCMA_SOC_PCI_MEM); -+ } else if (bus->chipinfo.id == 0x5300) { -+ tmp = BCMA_CORE_PCI_SBTOPCI_MEM; -+ tmp |= BCMA_CORE_PCI_SBTOPCI_PREF; -+ tmp |= BCMA_CORE_PCI_SBTOPCI_BURST; -+ if (pc->core->core_unit == 0) { -+ pc_host->mem_resource.start = BCMA_SOC_PCI_MEM; -+ pc_host->mem_resource.end = BCMA_SOC_PCI_MEM + -+ BCMA_SOC_PCI_MEM_SZ - 1; -+ pci_membase_1G = BCMA_SOC_PCIE_DMA_H32; -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ tmp | BCMA_SOC_PCI_MEM); -+ } else if (pc->core->core_unit == 1) { -+ pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM; -+ pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM + -+ BCMA_SOC_PCI_MEM_SZ - 1; -+ pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32; -+ pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG; -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ tmp | BCMA_SOC_PCI1_MEM); -+ } -+ } else -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0, -+ BCMA_CORE_PCI_SBTOPCI_IO); -+ -+ /* 64 MB configuration access window */ -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI1, BCMA_CORE_PCI_SBTOPCI_CFG0); -+ -+ /* 1 GB memory access window */ -+ pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI2, -+ BCMA_CORE_PCI_SBTOPCI_MEM | pci_membase_1G); -+ -+ -+ /* As per PCI Express Base Spec 1.1 we need to wait for -+ * at least 100 ms from the end of a reset (cold/warm/hot) -+ * before issuing configuration requests to PCI Express -+ * devices. -+ */ -+ udelay(100000); -+ -+ bcma_core_pci_enable_crs(pc); -+ -+ /* Enable PCI bridge BAR0 memory & master access */ -+ tmp = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; -+ bcma_extpci_write_config(pc, 0, 0, PCI_COMMAND, &tmp, sizeof(tmp)); -+ -+ /* Enable PCI interrupts */ -+ pcicore_write32(pc, BCMA_CORE_PCI_IMASK, BCMA_CORE_PCI_IMASK_INTA); -+ -+ /* Ok, ready to run, register it to the system. -+ * The following needs change, if we want to port hostmode -+ * to non-MIPS platform. */ -+ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, -+ 0x04000000); -+ pc_host->pci_controller.io_map_base = io_map_base; -+ set_io_port_base(pc_host->pci_controller.io_map_base); -+ /* Give some time to the PCI controller to configure itself with the new -+ * values. Not waiting at this point causes crashes of the machine. */ -+ mdelay(10); -+ register_pci_controller(&pc_host->pci_controller); -+ return; -+} -+ -+/* Early PCI fixup for a device on the PCI-core bridge. */ -+static void bcma_core_pci_fixup_pcibridge(struct pci_dev *dev) -+{ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return; -+ } -+ if (PCI_SLOT(dev->devfn) != 0) -+ return; -+ -+ pr_info("PCI: Fixing up bridge %s\n", pci_name(dev)); -+ -+ /* Enable PCI bridge bus mastering and memory space */ -+ pci_set_master(dev); -+ if (pcibios_enable_device(dev, ~0) < 0) { -+ pr_err("PCI: BCMA bridge enable failed\n"); -+ return; -+ } -+ -+ /* Enable PCI bridge BAR1 prefetch and burst */ -+ pci_write_config_dword(dev, BCMA_PCI_BAR1_CONTROL, 3); -+} -+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_pcibridge); -+ -+/* Early PCI fixup for all PCI-cores to set the correct memory address. */ -+static void bcma_core_pci_fixup_addresses(struct pci_dev *dev) -+{ -+ struct resource *res; -+ int pos; -+ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return; -+ } -+ if (PCI_SLOT(dev->devfn) == 0) -+ return; -+ -+ pr_info("PCI: Fixing up addresses %s\n", pci_name(dev)); -+ -+ for (pos = 0; pos < 6; pos++) { -+ res = &dev->resource[pos]; -+ if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) -+ pci_assign_resource(dev, pos); -+ } -+} -+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses); -+ -+/* This function is called when doing a pci_enable_device(). -+ * We must first check if the device is a device on the PCI-core bridge. */ -+int bcma_core_pci_plat_dev_init(struct pci_dev *dev) -+{ -+ struct bcma_drv_pci_host *pc_host; -+ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return -ENODEV; -+ } -+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, -+ pci_ops); -+ -+ pr_info("PCI: Fixing up device %s\n", pci_name(dev)); -+ -+ /* Fix up interrupt lines */ -+ dev->irq = bcma_core_mips_irq(pc_host->pdev->core) + 2; -+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -+ -+ return 0; -+} -+EXPORT_SYMBOL(bcma_core_pci_plat_dev_init); -+ -+/* PCI device IRQ mapping. */ -+int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev) -+{ -+ struct bcma_drv_pci_host *pc_host; -+ -+ if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) { -+ /* This is not a device on the PCI-core bridge. */ -+ return -ENODEV; -+ } -+ -+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host, -+ pci_ops); -+ return bcma_core_mips_irq(pc_host->pdev->core) + 2; -+} -+EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); ---- /dev/null -+++ b/drivers/bcma/driver_mips.c -@@ -0,0 +1,256 @@ -+/* -+ * Broadcom specific AMBA -+ * Broadcom MIPS32 74K core driver -+ * -+ * Copyright 2009, Broadcom Corporation -+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> -+ * Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com> -+ * Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de> -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include "bcma_private.h" -+ -+#include <linux/bcma/bcma.h> -+ -+#include <linux/serial.h> -+#include <linux/serial_core.h> -+#include <linux/serial_reg.h> -+#include <linux/time.h> -+ -+/* The 47162a0 hangs when reading MIPS DMP registers registers */ -+static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) -+{ -+ return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 && -+ dev->id.id == BCMA_CORE_MIPS_74K; -+} -+ -+/* The 5357b0 hangs when reading USB20H DMP registers */ -+static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) -+{ -+ return (dev->bus->chipinfo.id == 0x5357 || -+ dev->bus->chipinfo.id == 0x4749) && -+ dev->bus->chipinfo.pkg == 11 && -+ dev->id.id == BCMA_CORE_USB20_HOST; -+} -+ -+static inline u32 mips_read32(struct bcma_drv_mips *mcore, -+ u16 offset) -+{ -+ return bcma_read32(mcore->core, offset); -+} -+ -+static inline void mips_write32(struct bcma_drv_mips *mcore, -+ u16 offset, -+ u32 value) -+{ -+ bcma_write32(mcore->core, offset, value); -+} -+ -+static const u32 ipsflag_irq_mask[] = { -+ 0, -+ BCMA_MIPS_IPSFLAG_IRQ1, -+ BCMA_MIPS_IPSFLAG_IRQ2, -+ BCMA_MIPS_IPSFLAG_IRQ3, -+ BCMA_MIPS_IPSFLAG_IRQ4, -+}; -+ -+static const u32 ipsflag_irq_shift[] = { -+ 0, -+ BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, -+ BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, -+ BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, -+ BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, -+}; -+ -+static u32 bcma_core_mips_irqflag(struct bcma_device *dev) -+{ -+ u32 flag; -+ -+ if (bcma_core_mips_bcm47162a0_quirk(dev)) -+ return dev->core_index; -+ if (bcma_core_mips_bcm5357b0_quirk(dev)) -+ return dev->core_index; -+ flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); -+ -+ return flag & 0x1F; -+} -+ -+/* Get the MIPS IRQ assignment for a specified device. -+ * If unassigned, 0 is returned. -+ */ -+unsigned int bcma_core_mips_irq(struct bcma_device *dev) -+{ -+ struct bcma_device *mdev = dev->bus->drv_mips.core; -+ u32 irqflag; -+ unsigned int irq; -+ -+ irqflag = bcma_core_mips_irqflag(dev); -+ -+ for (irq = 1; irq <= 4; irq++) -+ if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & -+ (1 << irqflag)) -+ return irq; -+ -+ return 0; -+} -+EXPORT_SYMBOL(bcma_core_mips_irq); -+ -+static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) -+{ -+ unsigned int oldirq = bcma_core_mips_irq(dev); -+ struct bcma_bus *bus = dev->bus; -+ struct bcma_device *mdev = bus->drv_mips.core; -+ u32 irqflag; -+ -+ irqflag = bcma_core_mips_irqflag(dev); -+ BUG_ON(oldirq == 6); -+ -+ dev->irq = irq + 2; -+ -+ /* clear the old irq */ -+ if (oldirq == 0) -+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), -+ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & -+ ~(1 << irqflag)); -+ else -+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); -+ -+ /* assign the new one */ -+ if (irq == 0) { -+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), -+ bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | -+ (1 << irqflag)); -+ } else { -+ u32 oldirqflag = bcma_read32(mdev, -+ BCMA_MIPS_MIPS74K_INTMASK(irq)); -+ if (oldirqflag) { -+ struct bcma_device *core; -+ -+ /* backplane irq line is in use, find out who uses -+ * it and set user to irq 0 -+ */ -+ list_for_each_entry_reverse(core, &bus->cores, list) { -+ if ((1 << bcma_core_mips_irqflag(core)) == -+ oldirqflag) { -+ bcma_core_mips_set_irq(core, 0); -+ break; -+ } -+ } -+ } -+ bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), -+ 1 << irqflag); -+ } -+ -+ pr_info("set_irq: core 0x%04x, irq %d => %d\n", -+ dev->id.id, oldirq + 2, irq + 2); -+} -+ -+static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) -+{ -+ int i; -+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; -+ printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); -+ for (i = 0; i <= 6; i++) -+ printk(" %s%s", irq_name[i], i == irq ? "*" : " "); -+ printk("\n"); -+} -+ -+static void bcma_core_mips_dump_irq(struct bcma_bus *bus) -+{ -+ struct bcma_device *core; -+ -+ list_for_each_entry_reverse(core, &bus->cores, list) { -+ bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); -+ } -+} -+ -+u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) -+{ -+ struct bcma_bus *bus = mcore->core->bus; -+ -+ if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) -+ return bcma_pmu_get_clockcpu(&bus->drv_cc); -+ -+ pr_err("No PMU available, need this to get the cpu clock\n"); -+ return 0; -+} -+EXPORT_SYMBOL(bcma_cpu_clock); -+ -+static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) -+{ -+ struct bcma_bus *bus = mcore->core->bus; -+ -+ switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) { -+ case BCMA_CC_FLASHT_STSER: -+ case BCMA_CC_FLASHT_ATSER: -+ pr_err("Serial flash not supported.\n"); -+ break; -+ case BCMA_CC_FLASHT_PARA: -+ pr_info("found parallel flash.\n"); -+ bus->drv_cc.pflash.window = 0x1c000000; -+ bus->drv_cc.pflash.window_size = 0x02000000; -+ -+ if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) & -+ BCMA_CC_FLASH_CFG_DS) == 0) -+ bus->drv_cc.pflash.buswidth = 1; -+ else -+ bus->drv_cc.pflash.buswidth = 2; -+ break; -+ default: -+ pr_err("flash not supported.\n"); -+ } -+} -+ -+void bcma_core_mips_init(struct bcma_drv_mips *mcore) -+{ -+ struct bcma_bus *bus; -+ struct bcma_device *core; -+ bus = mcore->core->bus; -+ -+ pr_info("Initializing MIPS core...\n"); -+ -+ if (!mcore->setup_done) -+ mcore->assigned_irqs = 1; -+ -+ /* Assign IRQs to all cores on the bus */ -+ list_for_each_entry_reverse(core, &bus->cores, list) { -+ int mips_irq; -+ if (core->irq) -+ continue; -+ -+ mips_irq = bcma_core_mips_irq(core); -+ if (mips_irq > 4) -+ core->irq = 0; -+ else -+ core->irq = mips_irq + 2; -+ if (core->irq > 5) -+ continue; -+ switch (core->id.id) { -+ case BCMA_CORE_PCI: -+ case BCMA_CORE_PCIE: -+ case BCMA_CORE_ETHERNET: -+ case BCMA_CORE_ETHERNET_GBIT: -+ case BCMA_CORE_MAC_GBIT: -+ case BCMA_CORE_80211: -+ case BCMA_CORE_USB20_HOST: -+ /* These devices get their own IRQ line if available, -+ * the rest goes on IRQ0 -+ */ -+ if (mcore->assigned_irqs <= 4) -+ bcma_core_mips_set_irq(core, -+ mcore->assigned_irqs++); -+ break; -+ } -+ } -+ pr_info("IRQ reconfiguration done\n"); -+ bcma_core_mips_dump_irq(bus); -+ -+ if (mcore->setup_done) -+ return; -+ -+ bcma_chipco_serial_init(&bus->drv_cc); -+ bcma_core_mips_flash_detect(mcore); -+ mcore->setup_done = true; -+} ---- /dev/null -+++ b/drivers/bcma/host_soc.c -@@ -0,0 +1,183 @@ -+/* -+ * Broadcom specific AMBA -+ * System on Chip (SoC) Host -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include "bcma_private.h" -+#include "scan.h" -+#include <linux/bcma/bcma.h> -+#include <linux/bcma/bcma_soc.h> -+ -+static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset) -+{ -+ return readb(core->io_addr + offset); -+} -+ -+static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset) -+{ -+ return readw(core->io_addr + offset); -+} -+ -+static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset) -+{ -+ return readl(core->io_addr + offset); -+} -+ -+static void bcma_host_soc_write8(struct bcma_device *core, u16 offset, -+ u8 value) -+{ -+ writeb(value, core->io_addr + offset); -+} -+ -+static void bcma_host_soc_write16(struct bcma_device *core, u16 offset, -+ u16 value) -+{ -+ writew(value, core->io_addr + offset); -+} -+ -+static void bcma_host_soc_write32(struct bcma_device *core, u16 offset, -+ u32 value) -+{ -+ writel(value, core->io_addr + offset); -+} -+ -+#ifdef CONFIG_BCMA_BLOCKIO -+static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer, -+ size_t count, u16 offset, u8 reg_width) -+{ -+ void __iomem *addr = core->io_addr + offset; -+ -+ switch (reg_width) { -+ case sizeof(u8): { -+ u8 *buf = buffer; -+ -+ while (count) { -+ *buf = __raw_readb(addr); -+ buf++; -+ count--; -+ } -+ break; -+ } -+ case sizeof(u16): { -+ __le16 *buf = buffer; -+ -+ WARN_ON(count & 1); -+ while (count) { -+ *buf = (__force __le16)__raw_readw(addr); -+ buf++; -+ count -= 2; -+ } -+ break; -+ } -+ case sizeof(u32): { -+ __le32 *buf = buffer; -+ -+ WARN_ON(count & 3); -+ while (count) { -+ *buf = (__force __le32)__raw_readl(addr); -+ buf++; -+ count -= 4; -+ } -+ break; -+ } -+ default: -+ WARN_ON(1); -+ } -+} -+ -+static void bcma_host_soc_block_write(struct bcma_device *core, -+ const void *buffer, -+ size_t count, u16 offset, u8 reg_width) -+{ -+ void __iomem *addr = core->io_addr + offset; -+ -+ switch (reg_width) { -+ case sizeof(u8): { -+ const u8 *buf = buffer; -+ -+ while (count) { -+ __raw_writeb(*buf, addr); -+ buf++; -+ count--; -+ } -+ break; -+ } -+ case sizeof(u16): { -+ const __le16 *buf = buffer; -+ -+ WARN_ON(count & 1); -+ while (count) { -+ __raw_writew((__force u16)(*buf), addr); -+ buf++; -+ count -= 2; -+ } -+ break; -+ } -+ case sizeof(u32): { -+ const __le32 *buf = buffer; -+ -+ WARN_ON(count & 3); -+ while (count) { -+ __raw_writel((__force u32)(*buf), addr); -+ buf++; -+ count -= 4; -+ } -+ break; -+ } -+ default: -+ WARN_ON(1); -+ } -+} -+#endif /* CONFIG_BCMA_BLOCKIO */ -+ -+static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset) -+{ -+ return readl(core->io_wrap + offset); -+} -+ -+static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset, -+ u32 value) -+{ -+ writel(value, core->io_wrap + offset); -+} -+ -+const struct bcma_host_ops bcma_host_soc_ops = { -+ .read8 = bcma_host_soc_read8, -+ .read16 = bcma_host_soc_read16, -+ .read32 = bcma_host_soc_read32, -+ .write8 = bcma_host_soc_write8, -+ .write16 = bcma_host_soc_write16, -+ .write32 = bcma_host_soc_write32, -+#ifdef CONFIG_BCMA_BLOCKIO -+ .block_read = bcma_host_soc_block_read, -+ .block_write = bcma_host_soc_block_write, -+#endif -+ .aread32 = bcma_host_soc_aread32, -+ .awrite32 = bcma_host_soc_awrite32, -+}; -+ -+int __init bcma_host_soc_register(struct bcma_soc *soc) -+{ -+ struct bcma_bus *bus = &soc->bus; -+ int err; -+ -+ /* iomap only first core. We have to read some register on this core -+ * to scan the bus. -+ */ -+ bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1); -+ if (!bus->mmio) -+ return -ENOMEM; -+ -+ /* Host specific */ -+ bus->hosttype = BCMA_HOSTTYPE_SOC; -+ bus->ops = &bcma_host_soc_ops; -+ -+ /* Register */ -+ err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips); -+ if (err) -+ iounmap(bus->mmio); -+ -+ return err; -+} ---- /dev/null -+++ b/include/linux/bcma/bcma_driver_mips.h -@@ -0,0 +1,51 @@ -+#ifndef LINUX_BCMA_DRIVER_MIPS_H_ -+#define LINUX_BCMA_DRIVER_MIPS_H_ -+ -+#define BCMA_MIPS_IPSFLAG 0x0F08 -+/* which sbflags get routed to mips interrupt 1 */ -+#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F -+#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 -+/* which sbflags get routed to mips interrupt 2 */ -+#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 -+#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 -+/* which sbflags get routed to mips interrupt 3 */ -+#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 -+#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 -+/* which sbflags get routed to mips interrupt 4 */ -+#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 -+#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 -+ -+/* MIPS 74K core registers */ -+#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 -+#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 -+#define BCMA_MIPS_MIPS74K_BIST 0x000C -+#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 -+#define BCMA_MIPS_MIPS74K_INTMASK(int) \ -+ ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) -+#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C -+#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 -+#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 -+#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 -+#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 -+ -+#define BCMA_MIPS_OOBSELOUTA30 0x100 -+ -+struct bcma_device; -+ -+struct bcma_drv_mips { -+ struct bcma_device *core; -+ u8 setup_done:1; -+ unsigned int assigned_irqs; -+}; -+ -+#ifdef CONFIG_BCMA_DRIVER_MIPS -+extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); -+#else -+static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } -+#endif -+ -+extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); -+ -+extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); -+ -+#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ ---- /dev/null -+++ b/include/linux/bcma/bcma_soc.h -@@ -0,0 +1,16 @@ -+#ifndef LINUX_BCMA_SOC_H_ -+#define LINUX_BCMA_SOC_H_ -+ -+#include <linux/bcma/bcma.h> -+ -+struct bcma_soc { -+ struct bcma_bus bus; -+ struct bcma_device core_cc; -+ struct bcma_device core_mips; -+}; -+ -+int __init bcma_host_soc_register(struct bcma_soc *soc); -+ -+int bcma_bus_register(struct bcma_bus *bus); -+ -+#endif /* LINUX_BCMA_SOC_H_ */ diff --git a/target/linux/generic/patches-3.1/020-ssb_update.patch b/target/linux/generic/patches-3.1/020-ssb_update.patch index 76759273a7..033c5a775b 100644 --- a/target/linux/generic/patches-3.1/020-ssb_update.patch +++ b/target/linux/generic/patches-3.1/020-ssb_update.patch @@ -1,14 +1,3 @@ ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -74,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_ - u32 tmp; - - /* We do only have one cardbus device behind the bridge. */ -- if (pc->cardbusmode && (dev >= 1)) -+ if (pc->cardbusmode && (dev > 1)) - goto out; - - if (bus == 0) { --- a/drivers/ssb/b43_pci_bridge.c +++ b/drivers/ssb/b43_pci_bridge.c @@ -11,6 +11,7 @@ @@ -19,6 +8,15 @@ #include <linux/ssb/ssb.h> #include "ssb_private.h" +@@ -28,6 +29,8 @@ static const struct pci_device_id b43_pc + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c @@ -12,6 +12,9 @@ @@ -114,6 +112,17 @@ if (bus->extif.dev) { ssb_extif_get_clockcontrol(&bus->extif, &pll_type, &n, &m); } else if (bus->chipco.dev) { +--- a/drivers/ssb/driver_pcicore.c ++++ b/drivers/ssb/driver_pcicore.c +@@ -74,7 +74,7 @@ static u32 get_cfgspace_addr(struct ssb_ + u32 tmp; + + /* We do only have one cardbus device behind the bridge. */ +- if (pc->cardbusmode && (dev >= 1)) ++ if (pc->cardbusmode && (dev > 1)) + goto out; + + if (bus == 0) { --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -12,6 +12,7 @@ @@ -216,7 +225,26 @@ } --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c -@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss +@@ -178,6 +178,18 @@ err_pci: + #define SPEX(_outvar, _offset, _mask, _shift) \ + SPEX16(_outvar, _offset, _mask, _shift) + ++#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \ ++ do { \ ++ SPEX(_field[0], _offset + 0, _mask, _shift); \ ++ SPEX(_field[1], _offset + 2, _mask, _shift); \ ++ SPEX(_field[2], _offset + 4, _mask, _shift); \ ++ SPEX(_field[3], _offset + 6, _mask, _shift); \ ++ SPEX(_field[4], _offset + 8, _mask, _shift); \ ++ SPEX(_field[5], _offset + 10, _mask, _shift); \ ++ SPEX(_field[6], _offset + 12, _mask, _shift); \ ++ SPEX(_field[7], _offset + 14, _mask, _shift); \ ++ } while (0) ++ + + static inline u8 ssb_crc8(u8 crc, u8 data) + { +@@ -331,7 +343,6 @@ static void sprom_extract_r123(struct ss { int i; u16 v; @@ -224,8 +252,24 @@ u16 loc[3]; if (out->revision == 3) /* rev 3 moved MAC */ -@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss +@@ -361,8 +372,9 @@ static void sprom_extract_r123(struct ss + SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14); + SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15); + SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0); +- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, +- SSB_SPROM1_BINF_CCODE_SHIFT); ++ if (out->revision == 1) ++ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, ++ SSB_SPROM1_BINF_CCODE_SHIFT); + SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA, + SSB_SPROM1_BINF_ANTA_SHIFT); + SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG, +@@ -388,22 +400,16 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); + if (out->revision >= 2) SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0); /* Extract the antenna gain values. */ - gain = r123_extract_antgain(out->revision, in, @@ -251,7 +295,27 @@ } /* Revs 4 5 and 8 have partially shared layout */ -@@ -504,16 +495,14 @@ static void sprom_extract_r45(struct ssb +@@ -464,14 +470,17 @@ static void sprom_extract_r45(struct ssb + SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); + SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, + SSB_SPROM4_ETHPHY_ET1A_SHIFT); ++ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0); + if (out->revision == 4) { +- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0); + SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0); + } else { +- SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0); +@@ -504,16 +513,14 @@ static void sprom_extract_r45(struct ssb } /* Extract the antenna gain values. */ @@ -272,7 +336,7 @@ sprom_extract_r458(out, in); -@@ -523,7 +512,13 @@ static void sprom_extract_r45(struct ssb +@@ -523,14 +530,22 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -287,7 +351,17 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -596,16 +591,69 @@ static void sprom_extract_r8(struct ssb_ + v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); + } +- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); +@@ -596,17 +611,127 @@ static void sprom_extract_r8(struct ssb_ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); /* Extract the antenna gain values. */ @@ -305,7 +379,7 @@ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); -+ + + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -360,9 +434,75 @@ + SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); - ++ ++ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON, ++ SSB_SPROM8_LEDDC_ON_SHIFT); ++ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF, ++ SSB_SPROM8_LEDDC_OFF_SHIFT); ++ ++ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN, ++ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT); ++ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN, ++ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT); ++ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH, ++ SSB_SPROM8_TXRXC_SWITCH_SHIFT); ++ ++ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0); ++ ++ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0); ++ ++ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP, ++ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT); ++ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER, ++ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT); ++ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT); ++ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX, ++ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT); ++ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT); ++ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT); ++ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT); ++ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL, ++ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT); ++ ++ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0); ++ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0); ++ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0); ++ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0); ++ ++ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH, ++ SSB_SPROM8_THERMAL_TRESH_SHIFT); ++ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET, ++ SSB_SPROM8_THERMAL_OFFSET_SHIFT); ++ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_PHYCAL, ++ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT); ++ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD, ++ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT); ++ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT); sprom_extract_r458(out, in); + /* TODO - get remaining rev 8 stuff needed */ +@@ -736,7 +861,6 @@ static void ssb_pci_get_boardinfo(struct + { + bi->vendor = bus->host_pci->subsystem_vendor; + bi->type = bus->host_pci->subsystem_device; +- bi->rev = bus->host_pci->revision; + } + + int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( @@ -486,7 +626,7 @@ u8 rssisav2g; /* 2GHz RSSI params */ u8 rssismc2g; u8 rssismf2g; -@@ -82,19 +91,97 @@ struct ssb_sprom { +@@ -82,26 +91,103 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -591,7 +731,14 @@ }; /* Information about the PCB the circuitry is soldered on. */ -@@ -231,10 +318,9 @@ struct ssb_driver { + struct ssb_boardinfo { + u16 vendor; + u16 type; +- u8 rev; + }; + + +@@ -231,10 +317,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -617,8 +764,53 @@ --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h -@@ -432,6 +432,56 @@ +@@ -228,6 +228,7 @@ + #define SSB_SPROM1_AGAIN_BG_SHIFT 0 + #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_AGAIN_A_SHIFT 8 ++#define SSB_SPROM1_CCODE 0x0076 + + /* SPROM Revision 2 (inherits from rev 1) */ + #define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ +@@ -267,6 +268,7 @@ + #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ + + /* SPROM Revision 4 */ ++#define SSB_SPROM4_BOARDREV 0x0042 /* Board revision */ + #define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ + #define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ + #define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */ +@@ -389,6 +391,11 @@ + #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM8_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM8_LEDDC 0x009A ++#define SSB_SPROM8_LEDDC_ON 0xFF00 /* oncount */ ++#define SSB_SPROM8_LEDDC_ON_SHIFT 8 ++#define SSB_SPROM8_LEDDC_OFF 0x00FF /* offcount */ ++#define SSB_SPROM8_LEDDC_OFF_SHIFT 0 + #define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ + #define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ + #define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 +@@ -404,6 +411,13 @@ + #define SSB_SPROM8_AGAIN2_SHIFT 0 + #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM8_AGAIN3_SHIFT 8 ++#define SSB_SPROM8_TXRXC 0x00A2 ++#define SSB_SPROM8_TXRXC_TXCHAIN 0x000f ++#define SSB_SPROM8_TXRXC_TXCHAIN_SHIFT 0 ++#define SSB_SPROM8_TXRXC_RXCHAIN 0x00f0 ++#define SSB_SPROM8_TXRXC_RXCHAIN_SHIFT 4 ++#define SSB_SPROM8_TXRXC_SWITCH 0xff00 ++#define SSB_SPROM8_TXRXC_SWITCH_SHIFT 8 + #define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ + #define SSB_SPROM8_RSSISMF2G 0x000F + #define SSB_SPROM8_RSSISMC2G 0x00F0 +@@ -430,8 +444,87 @@ + #define SSB_SPROM8_TRI5GH_SHIFT 8 + #define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ ++#define SSB_SPROM8_RXPO2G_SHIFT 0 #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 +#define SSB_SPROM8_FEM2G 0x00AE @@ -634,10 +826,38 @@ +#define SSB_SROM8_FEM_ANTSWLUT 0xF800 +#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 +#define SSB_SPROM8_THERMAL 0x00B2 -+#define SSB_SPROM8_MPWR_RAWTS 0x00B4 -+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 -+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 -+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++#define SSB_SPROM8_THERMAL_OFFSET 0x00ff ++#define SSB_SPROM8_THERMAL_OFFSET_SHIFT 0 ++#define SSB_SPROM8_THERMAL_TRESH 0xff00 ++#define SSB_SPROM8_THERMAL_TRESH_SHIFT 8 ++/* Temp sense related entries */ ++#define SSB_SPROM8_RAWTS 0x00B4 ++#define SSB_SPROM8_RAWTS_RAWTEMP 0x01ff ++#define SSB_SPROM8_RAWTS_RAWTEMP_SHIFT 0 ++#define SSB_SPROM8_RAWTS_MEASPOWER 0xfe00 ++#define SSB_SPROM8_RAWTS_MEASPOWER_SHIFT 9 ++#define SSB_SPROM8_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE 0x00ff ++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT 0 ++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX 0xfc00 ++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT 10 ++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION 0x0300 ++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT 8 ++/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */ ++#define SSB_SPROM8_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR 0x000f ++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT 0 ++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP 0x0010 ++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4 ++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020 ++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5 ++#define SSB_SPROM8_TEMPDELTA 0x00BA ++#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff ++#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0 ++#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00 ++#define SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT 8 ++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS 0xf000 ++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT 12 + +/* There are 4 blocks with power info sharing the same layout */ +#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 @@ -674,7 +894,7 @@ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -@@ -456,12 +506,53 @@ +@@ -456,12 +549,63 @@ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ #define SSB_SPROM8_PA1HIB1 0x00DA #define SSB_SPROM8_PA1HIB2 0x00DC @@ -685,6 +905,16 @@ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ ++#define SSB_SPROM8_2G_MCSPO 0x0152 ++#define SSB_SPROM8_5G_MCSPO 0x0162 ++#define SSB_SPROM8_5GL_MCSPO 0x0172 ++#define SSB_SPROM8_5GH_MCSPO 0x0182 ++ ++#define SSB_SPROM8_CDDPO 0x0192 ++#define SSB_SPROM8_STBCPO 0x0194 ++#define SSB_SPROM8_BW40PO 0x0196 ++#define SSB_SPROM8_BWDUPPO 0x0198 ++ +/* Values for boardflags_lo read from SPROM */ +#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ +#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ diff --git a/target/linux/generic/patches-3.1/021-ssb_add_pci_id.patch b/target/linux/generic/patches-3.1/021-ssb_add_pci_id.patch deleted file mode 100644 index 7cffebec48..0000000000 --- a/target/linux/generic/patches-3.1/021-ssb_add_pci_id.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/ssb/b43_pci_bridge.c -+++ b/drivers/ssb/b43_pci_bridge.c -@@ -29,6 +29,8 @@ static const struct pci_device_id b43_pc - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, diff --git a/target/linux/generic/patches-3.1/025-bcma_backport.patch b/target/linux/generic/patches-3.1/025-bcma_backport.patch index 1f0b9b5126..c75896f0ad 100644 --- a/target/linux/generic/patches-3.1/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.1/025-bcma_backport.patch @@ -91,7 +91,24 @@ #endif --- a/drivers/bcma/core.c +++ b/drivers/bcma/core.c -@@ -110,6 +110,8 @@ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl); +@@ -29,6 +29,7 @@ void bcma_core_disable(struct bcma_devic + udelay(10); + + bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); ++ bcma_aread32(core, BCMA_RESET_CTL); + udelay(1); + } + EXPORT_SYMBOL_GPL(bcma_core_disable); +@@ -76,7 +77,7 @@ void bcma_core_set_clockmode(struct bcma + pr_err("HT force timeout\n"); + break; + case BCMA_CLKMODE_DYNAMIC: +- pr_warn("Dynamic clockmode not supported yet!\n"); ++ bcma_set32(core, BCMA_CLKCTLST, ~BCMA_CLKCTLST_FORCEHT); + break; + } + } +@@ -110,6 +111,8 @@ EXPORT_SYMBOL_GPL(bcma_core_pll_ctl); u32 bcma_core_dma_translation(struct bcma_device *core) { switch (core->bus->hosttype) { @@ -676,7 +693,7 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ -@@ -15,40 +16,41 @@ +@@ -15,40 +16,39 @@ * R/W ops. **************************************************/ @@ -691,7 +708,7 @@ + return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); } - #if 0 +-#if 0 static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) { - pcicore_write32(pc, 0x130, address); @@ -701,7 +718,7 @@ + pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); } - #endif +-#endif static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) { @@ -734,7 +751,7 @@ break; msleep(1); } -@@ -56,79 +58,84 @@ static void bcma_pcie_mdio_set_phy(struc +@@ -56,79 +56,84 @@ static void bcma_pcie_mdio_set_phy(struc static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) { @@ -850,7 +867,7 @@ } /************************************************** -@@ -137,67 +144,53 @@ static void bcma_pcie_mdio_write(struct +@@ -137,67 +142,90 @@ static void bcma_pcie_mdio_write(struct static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) { @@ -885,6 +902,41 @@ + bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, + BCMA_CORE_PCI_SERDES_PLL_CTRL, + tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); ++} ++ ++static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc) ++{ ++ struct bcma_device *core = pc->core; ++ u16 val16, core_index; ++ uint regoff; ++ ++ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET); ++ core_index = (u16)core->core_index; ++ ++ val16 = pcicore_read16(pc, regoff); ++ if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT) ++ != core_index) { ++ val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) | ++ (val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK); ++ pcicore_write16(pc, regoff, val16); ++ } ++} ++ ++/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */ ++/* Needs to happen when coming out of 'standby'/'hibernate' */ ++static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc) ++{ ++ u16 val16; ++ uint regoff; ++ ++ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_MISC_CONFIG); ++ ++ val16 = pcicore_read16(pc, regoff); ++ ++ if (!(val16 & BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST)) { ++ val16 |= BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST; ++ pcicore_write16(pc, regoff, val16); ++ } } /************************************************** @@ -894,7 +946,9 @@ -static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) { ++ bcma_core_pci_fixcfg(pc); bcma_pcicore_serdes_workaround(pc); ++ bcma_core_pci_config_fixup(pc); } -static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) @@ -902,7 +956,9 @@ { - struct bcma_bus *bus = pc->core->bus; - u16 chipid_top; -- ++ if (pc->setup_done) ++ return; + - chipid_top = (bus->chipinfo.id & 0xFF00); - if (chipid_top != 0x4700 && - chipid_top != 0x5300) @@ -922,9 +978,7 @@ - - return true; -} -+ if (pc->setup_done) -+ return; - +- -void bcma_core_pci_init(struct bcma_drv_pci *pc) -{ - if (bcma_core_pci_is_in_hostmode(pc)) { @@ -943,7 +997,7 @@ } int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, -@@ -205,7 +198,14 @@ int bcma_core_pci_irq_ctl(struct bcma_dr +@@ -205,7 +233,14 @@ int bcma_core_pci_irq_ctl(struct bcma_dr { struct pci_dev *pdev = pc->core->bus->host_pci; u32 coremask, tmp; @@ -959,6 +1013,24 @@ err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp); if (err) +@@ -223,3 +258,17 @@ out: + return err; + } + EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); ++ ++void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) ++{ ++ u32 w; ++ ++ w = bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); ++ if (extend) ++ w |= BCMA_CORE_PCI_ASPMTIMER_EXTEND; ++ else ++ w &= ~BCMA_CORE_PCI_ASPMTIMER_EXTEND; ++ bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); ++ bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -2,13 +2,587 @@ @@ -1083,7 +1155,7 @@ + if (unlikely(!addr)) + goto out; + err = -ENOMEM; -+ mmio = ioremap_nocache(addr, len); ++ mmio = ioremap_nocache(addr, sizeof(val)); + if (!mmio) + goto out; + @@ -1135,7 +1207,7 @@ + addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; + addr |= (func << 8); + addr |= (off & 0xfc); -+ mmio = ioremap_nocache(addr, len); ++ mmio = ioremap_nocache(addr, sizeof(val)); + if (!mmio) + goto out; + } @@ -1144,7 +1216,7 @@ + if (unlikely(!addr)) + goto out; + err = -ENOMEM; -+ mmio = ioremap_nocache(addr, len); ++ mmio = ioremap_nocache(addr, sizeof(val)); + if (!mmio) + goto out; + @@ -1455,8 +1527,8 @@ + /* Ok, ready to run, register it to the system. + * The following needs change, if we want to port hostmode + * to non-MIPS platform. */ -+ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, -+ 0x04000000); ++ io_map_base = (unsigned long)ioremap_nocache(pc_host->mem_resource.start, ++ resource_size(&pc_host->mem_resource)); + pc_host->pci_controller.io_map_base = io_map_base; + set_io_port_base(pc_host->pci_controller.io_map_base); + /* Give some time to the PCI controller to configure itself with the new @@ -1643,7 +1715,26 @@ { struct bcma_bus *bus; int err = -ENOMEM; -@@ -223,6 +234,35 @@ static void bcma_host_pci_remove(struct +@@ -190,6 +201,9 @@ static int bcma_host_pci_probe(struct pc + bus->hosttype = BCMA_HOSTTYPE_PCI; + bus->ops = &bcma_host_pci_ops; + ++ bus->boardinfo.vendor = bus->host_pci->subsystem_vendor; ++ bus->boardinfo.type = bus->host_pci->subsystem_device; ++ + /* Register */ + err = bcma_bus_register(bus); + if (err) +@@ -211,7 +225,7 @@ err_kfree_bus: + return err; + } + +-static void bcma_host_pci_remove(struct pci_dev *dev) ++static void __devexit bcma_host_pci_remove(struct pci_dev *dev) + { + struct bcma_bus *bus = pci_get_drvdata(dev); + +@@ -223,6 +237,35 @@ static void bcma_host_pci_remove(struct pci_set_drvdata(dev, NULL); } @@ -1679,10 +1770,12 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) }, { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, -@@ -238,6 +278,7 @@ static struct pci_driver bcma_pci_bridge +@@ -237,7 +280,8 @@ static struct pci_driver bcma_pci_bridge + .name = "bcma-pci-bridge", .id_table = bcma_pci_bridge_tbl, .probe = bcma_host_pci_probe, - .remove = bcma_host_pci_remove, +- .remove = bcma_host_pci_remove, ++ .remove = __devexit_p(bcma_host_pci_remove), + .driver.pm = BCMA_PM_OPS, }; @@ -2092,7 +2185,104 @@ drv->drv.name = drv->name; --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c -@@ -200,18 +200,174 @@ static s32 bcma_erom_get_addr_desc(struc +@@ -19,7 +19,14 @@ struct bcma_device_id_name { + u16 id; + const char *name; + }; +-struct bcma_device_id_name bcma_device_names[] = { ++ ++static const struct bcma_device_id_name bcma_arm_device_names[] = { ++ { BCMA_CORE_ARM_1176, "ARM 1176" }, ++ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, ++ { BCMA_CORE_ARM_CM3, "ARM CM3" }, ++}; ++ ++static const struct bcma_device_id_name bcma_bcm_device_names[] = { + { BCMA_CORE_OOB_ROUTER, "OOB Router" }, + { BCMA_CORE_INVALID, "Invalid" }, + { BCMA_CORE_CHIPCOMMON, "ChipCommon" }, +@@ -27,7 +34,6 @@ struct bcma_device_id_name bcma_device_n + { BCMA_CORE_SRAM, "SRAM" }, + { BCMA_CORE_SDRAM, "SDRAM" }, + { BCMA_CORE_PCI, "PCI" }, +- { BCMA_CORE_MIPS, "MIPS" }, + { BCMA_CORE_ETHERNET, "Fast Ethernet" }, + { BCMA_CORE_V90, "V90" }, + { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" }, +@@ -44,7 +50,6 @@ struct bcma_device_id_name bcma_device_n + { BCMA_CORE_PHY_A, "PHY A" }, + { BCMA_CORE_PHY_B, "PHY B" }, + { BCMA_CORE_PHY_G, "PHY G" }, +- { BCMA_CORE_MIPS_3302, "MIPS 3302" }, + { BCMA_CORE_USB11_HOST, "USB 1.1 Host" }, + { BCMA_CORE_USB11_DEV, "USB 1.1 Device" }, + { BCMA_CORE_USB20_HOST, "USB 2.0 Host" }, +@@ -58,15 +63,11 @@ struct bcma_device_id_name bcma_device_n + { BCMA_CORE_PHY_N, "PHY N" }, + { BCMA_CORE_SRAM_CTL, "SRAM Controller" }, + { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" }, +- { BCMA_CORE_ARM_1176, "ARM 1176" }, +- { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, + { BCMA_CORE_PHY_LP, "PHY LP" }, + { BCMA_CORE_PMU, "PMU" }, + { BCMA_CORE_PHY_SSN, "PHY SSN" }, + { BCMA_CORE_SDIO_DEV, "SDIO Device" }, +- { BCMA_CORE_ARM_CM3, "ARM CM3" }, + { BCMA_CORE_PHY_HT, "PHY HT" }, +- { BCMA_CORE_MIPS_74K, "MIPS 74K" }, + { BCMA_CORE_MAC_GBIT, "GBit MAC" }, + { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" }, + { BCMA_CORE_PCIE_RC, "PCIe Root Complex" }, +@@ -79,16 +80,41 @@ struct bcma_device_id_name bcma_device_n + { BCMA_CORE_SHIM, "SHIM" }, + { BCMA_CORE_DEFAULT, "Default" }, + }; +-const char *bcma_device_name(struct bcma_device_id *id) ++ ++static const struct bcma_device_id_name bcma_mips_device_names[] = { ++ { BCMA_CORE_MIPS, "MIPS" }, ++ { BCMA_CORE_MIPS_3302, "MIPS 3302" }, ++ { BCMA_CORE_MIPS_74K, "MIPS 74K" }, ++}; ++ ++static const char *bcma_device_name(const struct bcma_device_id *id) + { +- int i; ++ const struct bcma_device_id_name *names; ++ int size, i; + +- if (id->manuf == BCMA_MANUF_BCM) { +- for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) { +- if (bcma_device_names[i].id == id->id) +- return bcma_device_names[i].name; +- } ++ /* search manufacturer specific names */ ++ switch (id->manuf) { ++ case BCMA_MANUF_ARM: ++ names = bcma_arm_device_names; ++ size = ARRAY_SIZE(bcma_arm_device_names); ++ break; ++ case BCMA_MANUF_BCM: ++ names = bcma_bcm_device_names; ++ size = ARRAY_SIZE(bcma_bcm_device_names); ++ break; ++ case BCMA_MANUF_MIPS: ++ names = bcma_mips_device_names; ++ size = ARRAY_SIZE(bcma_mips_device_names); ++ break; ++ default: ++ return "UNKNOWN"; ++ } ++ ++ for (i = 0; i < size; i++) { ++ if (names[i].id == id->id) ++ return names[i].name; + } ++ + return "UNKNOWN"; + } + +@@ -200,18 +226,174 @@ static s32 bcma_erom_get_addr_desc(struc return addrl; } @@ -2272,7 +2462,7 @@ INIT_LIST_HEAD(&bus->cores); bus->nr_cores = 0; -@@ -219,142 +375,133 @@ int bcma_bus_scan(struct bcma_bus *bus) +@@ -219,142 +401,133 @@ int bcma_bus_scan(struct bcma_bus *bus) bcma_scan_switch_core(bus, BCMA_ADDR_BASE); tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); @@ -2468,7 +2658,7 @@ + } else { + eromptr = bus->mmio; + } - ++ + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); @@ -2488,7 +2678,7 @@ + break; + else if (err < 0) + return err; -+ + + core->core_index = core_num++; + bus->nr_cores++; pr_info("Core %d found: %s " @@ -2583,7 +2773,7 @@ /************************************************** * R/W ops. -@@ -124,41 +176,268 @@ static int bcma_sprom_valid(const u16 *s +@@ -124,41 +176,418 @@ static int bcma_sprom_valid(const u16 *s * SPROM extraction. **************************************************/ @@ -2592,6 +2782,22 @@ +#define SPEX(_field, _offset, _mask, _shift) \ + bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) + ++#define SPEX32(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((((u32)sprom[SPOFF((_offset)+2)] << 16 | \ ++ sprom[SPOFF(_offset)]) & (_mask)) >> (_shift)) ++ ++#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \ ++ do { \ ++ SPEX(_field[0], _offset + 0, _mask, _shift); \ ++ SPEX(_field[1], _offset + 2, _mask, _shift); \ ++ SPEX(_field[2], _offset + 4, _mask, _shift); \ ++ SPEX(_field[3], _offset + 6, _mask, _shift); \ ++ SPEX(_field[4], _offset + 8, _mask, _shift); \ ++ SPEX(_field[5], _offset + 10, _mask, _shift); \ ++ SPEX(_field[6], _offset + 12, _mask, _shift); \ ++ SPEX(_field[7], _offset + 14, _mask, _shift); \ ++ } while (0) ++ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) { - u16 v; @@ -2655,7 +2861,8 @@ + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); + SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); + -+ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); + + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { @@ -2710,6 +2917,136 @@ + SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, + SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, ++ SSB_SPROM8_ANTAVAIL_A_SHIFT); ++ SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, ++ SSB_SPROM8_ANTAVAIL_BG_SHIFT); ++ SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0); ++ SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG, ++ SSB_SPROM8_ITSSI_BG_SHIFT); ++ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); ++ SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, ++ SSB_SPROM8_ITSSI_A_SHIFT); ++ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); ++ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, ++ SSB_SPROM8_MAXP_AL_SHIFT); ++ SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); ++ SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, ++ SSB_SPROM8_GPIOA_P1_SHIFT); ++ SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); ++ SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, ++ SSB_SPROM8_GPIOB_P3_SHIFT); ++ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); ++ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, ++ SSB_SPROM8_TRI5G_SHIFT); ++ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); ++ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, ++ SSB_SPROM8_TRI5GH_SHIFT); ++ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, ++ SSB_SPROM8_RXPO2G_SHIFT); ++ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, ++ SSB_SPROM8_RXPO5G_SHIFT); ++ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); ++ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, ++ SSB_SPROM8_RSSISMC2G_SHIFT); ++ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, ++ SSB_SPROM8_RSSISAV2G_SHIFT); ++ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, ++ SSB_SPROM8_BXA2G_SHIFT); ++ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); ++ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, ++ SSB_SPROM8_RSSISMC5G_SHIFT); ++ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, ++ SSB_SPROM8_RSSISAV5G_SHIFT); ++ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, ++ SSB_SPROM8_BXA5G_SHIFT); ++ ++ SPEX(pa0b0, SSB_SPROM8_PA0B0, ~0, 0); ++ SPEX(pa0b1, SSB_SPROM8_PA0B1, ~0, 0); ++ SPEX(pa0b2, SSB_SPROM8_PA0B2, ~0, 0); ++ SPEX(pa1b0, SSB_SPROM8_PA1B0, ~0, 0); ++ SPEX(pa1b1, SSB_SPROM8_PA1B1, ~0, 0); ++ SPEX(pa1b2, SSB_SPROM8_PA1B2, ~0, 0); ++ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, ~0, 0); ++ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, ~0, 0); ++ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, ~0, 0); ++ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, ~0, 0); ++ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, ~0, 0); ++ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, ~0, 0); ++ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, ~0, 0); ++ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, ~0, 0); ++ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, ~0, 0); ++ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, ~0, 0); ++ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, ~0, 0); ++ ++ /* Extract the antenna gain values. */ ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, ++ SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, ++ SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, ++ SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, ++ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); ++ ++ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON, ++ SSB_SPROM8_LEDDC_ON_SHIFT); ++ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF, ++ SSB_SPROM8_LEDDC_OFF_SHIFT); ++ ++ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN, ++ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT); ++ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN, ++ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT); ++ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH, ++ SSB_SPROM8_TXRXC_SWITCH_SHIFT); ++ ++ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0); ++ ++ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0); ++ ++ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP, ++ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT); ++ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER, ++ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT); ++ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT); ++ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX, ++ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT); ++ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT); ++ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT); ++ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT); ++ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL, ++ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT); ++ ++ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0); ++ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0); ++ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0); ++ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0); ++ ++ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH, ++ SSB_SPROM8_THERMAL_TRESH_SHIFT); ++ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET, ++ SSB_SPROM8_THERMAL_OFFSET_SHIFT); ++ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_PHYCAL, ++ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT); ++ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD, ++ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT); ++ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT); +} + +/* @@ -2819,16 +3156,19 @@ - if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) - return -ENOENT; + if (!bcma_sprom_ext_available(bus)) { ++ bool sprom_onchip; ++ + /* + * External SPROM takes precedence so check + * on-chip OTP only when no external SPROM + * is present. + */ -+ if (bcma_sprom_onchip_available(bus)) { ++ sprom_onchip = bcma_sprom_onchip_available(bus); ++ if (sprom_onchip) { + /* determine offset */ + offset = bcma_sprom_onchip_offset(bus); + } -+ if (!offset) { ++ if (!offset || !sprom_onchip) { + /* + * Maybe there is no SPROM on the device? + * Now we ask the arch code if there is some sprom @@ -2882,7 +3222,19 @@ }; struct bcma_chipinfo { -@@ -130,14 +131,19 @@ struct bcma_device { +@@ -25,6 +26,11 @@ struct bcma_chipinfo { + u8 pkg; + }; + ++struct bcma_boardinfo { ++ u16 vendor; ++ u16 type; ++}; ++ + enum bcma_clkmode { + BCMA_CLKMODE_FAST, + BCMA_CLKMODE_DYNAMIC, +@@ -130,14 +136,19 @@ struct bcma_device { struct device dev; struct device *dma_dev; @@ -2902,7 +3254,7 @@ void *drvdata; struct list_head list; }; -@@ -157,7 +163,7 @@ struct bcma_driver { +@@ -157,7 +168,7 @@ struct bcma_driver { int (*probe)(struct bcma_device *dev); void (*remove)(struct bcma_device *dev); @@ -2911,7 +3263,7 @@ int (*resume)(struct bcma_device *dev); void (*shutdown)(struct bcma_device *dev); -@@ -165,12 +171,17 @@ struct bcma_driver { +@@ -165,12 +176,17 @@ struct bcma_driver { }; extern int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); @@ -2933,7 +3285,12 @@ struct bcma_bus { /* The MMIO area. */ void __iomem *mmio; -@@ -190,71 +201,96 @@ struct bcma_bus { +@@ -187,74 +203,101 @@ struct bcma_bus { + + struct bcma_chipinfo chipinfo; + ++ struct bcma_boardinfo boardinfo; ++ struct bcma_device *mapped_core; struct list_head cores; u8 nr_cores; @@ -3303,7 +3660,7 @@ +#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -53,6 +53,35 @@ struct pci_dev; +@@ -53,11 +53,47 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 @@ -3339,7 +3696,19 @@ #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ -@@ -72,20 +101,114 @@ struct pci_dev; + #define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */ + #define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */ ++#define BCMA_CORE_PCI_SPROM_PI_OFFSET 0 /* first word */ ++#define BCMA_CORE_PCI_SPROM_PI_MASK 0xf000 /* bit 15:12 */ ++#define BCMA_CORE_PCI_SPROM_PI_SHIFT 12 /* bit 15:12 */ ++#define BCMA_CORE_PCI_SPROM_MISC_CONFIG 5 /* word 5 */ ++#define BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */ ++#define BCMA_CORE_PCI_SPROM_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */ ++#define BCMA_CORE_PCI_SPROM_CLKREQ_ENB 0x0800 /* bit 11 */ + + /* SBtoPCIx */ + #define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000 +@@ -72,20 +108,118 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ @@ -3375,6 +3744,7 @@ +#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ +#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ +#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_ASPMTIMER_EXTEND 0x01000000 /* > rev7: enable extend ASPM timer */ +#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ @@ -3443,17 +3813,20 @@ }; /* Register access */ ++#define pcicore_read16(pc, offset) bcma_read16((pc)->core, offset) #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) ++#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val) #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) -extern void bcma_core_pci_init(struct bcma_drv_pci *pc); +extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable); - ++extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); ++ +extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); +extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); -+ + #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h diff --git a/target/linux/generic/patches-3.2/020-ssb_update.patch b/target/linux/generic/patches-3.2/020-ssb_update.patch index 1b38e380d4..0aabe57a31 100644 --- a/target/linux/generic/patches-3.2/020-ssb_update.patch +++ b/target/linux/generic/patches-3.2/020-ssb_update.patch @@ -1,3 +1,14 @@ +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -29,6 +29,8 @@ static const struct pci_device_id b43_pc + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c @@ -13,6 +13,9 @@ @@ -160,7 +171,26 @@ &clkctl_n, &clkctl_m); --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c -@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss +@@ -178,6 +178,18 @@ err_pci: + #define SPEX(_outvar, _offset, _mask, _shift) \ + SPEX16(_outvar, _offset, _mask, _shift) + ++#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \ ++ do { \ ++ SPEX(_field[0], _offset + 0, _mask, _shift); \ ++ SPEX(_field[1], _offset + 2, _mask, _shift); \ ++ SPEX(_field[2], _offset + 4, _mask, _shift); \ ++ SPEX(_field[3], _offset + 6, _mask, _shift); \ ++ SPEX(_field[4], _offset + 8, _mask, _shift); \ ++ SPEX(_field[5], _offset + 10, _mask, _shift); \ ++ SPEX(_field[6], _offset + 12, _mask, _shift); \ ++ SPEX(_field[7], _offset + 14, _mask, _shift); \ ++ } while (0) ++ + + static inline u8 ssb_crc8(u8 crc, u8 data) + { +@@ -331,7 +343,6 @@ static void sprom_extract_r123(struct ss { int i; u16 v; @@ -168,8 +198,24 @@ u16 loc[3]; if (out->revision == 3) /* rev 3 moved MAC */ -@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss +@@ -361,8 +372,9 @@ static void sprom_extract_r123(struct ss + SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14); + SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15); + SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0); +- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, +- SSB_SPROM1_BINF_CCODE_SHIFT); ++ if (out->revision == 1) ++ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, ++ SSB_SPROM1_BINF_CCODE_SHIFT); + SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA, + SSB_SPROM1_BINF_ANTA_SHIFT); + SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG, +@@ -388,22 +400,16 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); + if (out->revision >= 2) SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0); /* Extract the antenna gain values. */ - gain = r123_extract_antgain(out->revision, in, @@ -195,7 +241,27 @@ } /* Revs 4 5 and 8 have partially shared layout */ -@@ -504,16 +495,14 @@ static void sprom_extract_r45(struct ssb +@@ -464,14 +470,17 @@ static void sprom_extract_r45(struct ssb + SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); + SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, + SSB_SPROM4_ETHPHY_ET1A_SHIFT); ++ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0); + if (out->revision == 4) { +- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0); + SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0); + } else { +- SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0); +@@ -504,16 +513,14 @@ static void sprom_extract_r45(struct ssb } /* Extract the antenna gain values. */ @@ -216,7 +282,7 @@ sprom_extract_r458(out, in); -@@ -523,7 +512,13 @@ static void sprom_extract_r45(struct ssb +@@ -523,14 +530,22 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -231,7 +297,17 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -596,16 +591,69 @@ static void sprom_extract_r8(struct ssb_ + v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); + } +- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); +@@ -596,17 +611,127 @@ static void sprom_extract_r8(struct ssb_ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); /* Extract the antenna gain values. */ @@ -249,7 +325,7 @@ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); - memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, - sizeof(out->antenna_gain.ghz5)); -+ + + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { + o = pwr_info_offset[i]; @@ -304,9 +380,75 @@ + SSB_SROM8_FEM_TR_ISO, SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); - ++ ++ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON, ++ SSB_SPROM8_LEDDC_ON_SHIFT); ++ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF, ++ SSB_SPROM8_LEDDC_OFF_SHIFT); ++ ++ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN, ++ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT); ++ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN, ++ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT); ++ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH, ++ SSB_SPROM8_TXRXC_SWITCH_SHIFT); ++ ++ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0); ++ ++ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0); ++ ++ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP, ++ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT); ++ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER, ++ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT); ++ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT); ++ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX, ++ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT); ++ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT); ++ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT); ++ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT); ++ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL, ++ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT); ++ ++ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0); ++ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0); ++ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0); ++ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0); ++ ++ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH, ++ SSB_SPROM8_THERMAL_TRESH_SHIFT); ++ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET, ++ SSB_SPROM8_THERMAL_OFFSET_SHIFT); ++ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_PHYCAL, ++ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT); ++ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD, ++ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT); ++ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT); sprom_extract_r458(out, in); + /* TODO - get remaining rev 8 stuff needed */ +@@ -736,7 +861,6 @@ static void ssb_pci_get_boardinfo(struct + { + bi->vendor = bus->host_pci->subsystem_vendor; + bi->type = bus->host_pci->subsystem_device; +- bi->rev = bus->host_pci->revision; + } + + int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( @@ -428,7 +570,7 @@ u8 rssisav2g; /* 2GHz RSSI params */ u8 rssismc2g; u8 rssismf2g; -@@ -82,19 +91,97 @@ struct ssb_sprom { +@@ -82,26 +91,103 @@ struct ssb_sprom { u16 boardflags2_hi; /* Board flags (bits 48-63) */ /* TODO store board flags in a single u64 */ @@ -438,19 +580,21 @@ * on each band. Values in dBm/4 (Q5.2). Negative gain means the * loss in the connectors is bigger than the gain. */ struct { -+ s8 a0, a1, a2, a3; -+ } antenna_gain; -+ -+ struct { - struct { +- struct { - s8 a0, a1, a2, a3; - } ghz24; /* 2.4GHz band */ -+ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; -+ } ghz2; - struct { +- struct { - s8 a0, a1, a2, a3; - } ghz5; /* 5GHz band */ -- } antenna_gain; ++ s8 a0, a1, a2, a3; + } antenna_gain; + +- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ struct { ++ struct { ++ u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; ++ } ghz2; ++ struct { + u8 tssipos, extpa_gain, pdet_range, tr_iso, antswlut; + } ghz5; + } fem; @@ -500,8 +644,7 @@ + u8 measpower1; + u8 measpower2; + u8 pcieingress_war; - -- /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ ++ + /* power per rate from sromrev 9 */ + u16 cckbw202gpo; + u16 cckbw20ul2gpo; @@ -532,6 +675,13 @@ }; /* Information about the PCB the circuitry is soldered on. */ + struct ssb_boardinfo { + u16 vendor; + u16 type; +- u8 rev; + }; + + --- a/include/linux/ssb/ssb_driver_gige.h +++ b/include/linux/ssb/ssb_driver_gige.h @@ -2,6 +2,7 @@ @@ -544,8 +694,53 @@ --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h -@@ -432,6 +432,56 @@ +@@ -228,6 +228,7 @@ + #define SSB_SPROM1_AGAIN_BG_SHIFT 0 + #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_AGAIN_A_SHIFT 8 ++#define SSB_SPROM1_CCODE 0x0076 + + /* SPROM Revision 2 (inherits from rev 1) */ + #define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ +@@ -267,6 +268,7 @@ + #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ + + /* SPROM Revision 4 */ ++#define SSB_SPROM4_BOARDREV 0x0042 /* Board revision */ + #define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ + #define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ + #define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */ +@@ -389,6 +391,11 @@ + #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM8_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM8_LEDDC 0x009A ++#define SSB_SPROM8_LEDDC_ON 0xFF00 /* oncount */ ++#define SSB_SPROM8_LEDDC_ON_SHIFT 8 ++#define SSB_SPROM8_LEDDC_OFF 0x00FF /* offcount */ ++#define SSB_SPROM8_LEDDC_OFF_SHIFT 0 + #define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ + #define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ + #define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 +@@ -404,6 +411,13 @@ + #define SSB_SPROM8_AGAIN2_SHIFT 0 + #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM8_AGAIN3_SHIFT 8 ++#define SSB_SPROM8_TXRXC 0x00A2 ++#define SSB_SPROM8_TXRXC_TXCHAIN 0x000f ++#define SSB_SPROM8_TXRXC_TXCHAIN_SHIFT 0 ++#define SSB_SPROM8_TXRXC_RXCHAIN 0x00f0 ++#define SSB_SPROM8_TXRXC_RXCHAIN_SHIFT 4 ++#define SSB_SPROM8_TXRXC_SWITCH 0xff00 ++#define SSB_SPROM8_TXRXC_SWITCH_SHIFT 8 + #define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ + #define SSB_SPROM8_RSSISMF2G 0x000F + #define SSB_SPROM8_RSSISMC2G 0x00F0 +@@ -430,8 +444,87 @@ + #define SSB_SPROM8_TRI5GH_SHIFT 8 + #define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ ++#define SSB_SPROM8_RXPO2G_SHIFT 0 #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 +#define SSB_SPROM8_FEM2G 0x00AE @@ -561,10 +756,38 @@ +#define SSB_SROM8_FEM_ANTSWLUT 0xF800 +#define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 +#define SSB_SPROM8_THERMAL 0x00B2 -+#define SSB_SPROM8_MPWR_RAWTS 0x00B4 -+#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 -+#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 -+#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++#define SSB_SPROM8_THERMAL_OFFSET 0x00ff ++#define SSB_SPROM8_THERMAL_OFFSET_SHIFT 0 ++#define SSB_SPROM8_THERMAL_TRESH 0xff00 ++#define SSB_SPROM8_THERMAL_TRESH_SHIFT 8 ++/* Temp sense related entries */ ++#define SSB_SPROM8_RAWTS 0x00B4 ++#define SSB_SPROM8_RAWTS_RAWTEMP 0x01ff ++#define SSB_SPROM8_RAWTS_RAWTEMP_SHIFT 0 ++#define SSB_SPROM8_RAWTS_MEASPOWER 0xfe00 ++#define SSB_SPROM8_RAWTS_MEASPOWER_SHIFT 9 ++#define SSB_SPROM8_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE 0x00ff ++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT 0 ++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX 0xfc00 ++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT 10 ++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION 0x0300 ++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT 8 ++/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */ ++#define SSB_SPROM8_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR 0x000f ++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT 0 ++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP 0x0010 ++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4 ++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020 ++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5 ++#define SSB_SPROM8_TEMPDELTA 0x00BA ++#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff ++#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0 ++#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00 ++#define SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT 8 ++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS 0xf000 ++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT 12 + +/* There are 4 blocks with power info sharing the same layout */ +#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 @@ -601,7 +824,7 @@ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -@@ -456,6 +506,7 @@ +@@ -456,12 +549,23 @@ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ #define SSB_SPROM8_PA1HIB1 0x00DA #define SSB_SPROM8_PA1HIB2 0x00DC @@ -609,3 +832,19 @@ #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + ++#define SSB_SPROM8_2G_MCSPO 0x0152 ++#define SSB_SPROM8_5G_MCSPO 0x0162 ++#define SSB_SPROM8_5GL_MCSPO 0x0172 ++#define SSB_SPROM8_5GH_MCSPO 0x0182 ++ ++#define SSB_SPROM8_CDDPO 0x0192 ++#define SSB_SPROM8_STBCPO 0x0194 ++#define SSB_SPROM8_BW40PO 0x0196 ++#define SSB_SPROM8_BWDUPPO 0x0198 ++ + /* Values for boardflags_lo read from SPROM */ + #define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ + #define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ diff --git a/target/linux/generic/patches-3.2/021-ssb_add_pci_id.patch b/target/linux/generic/patches-3.2/021-ssb_add_pci_id.patch deleted file mode 100644 index 7cffebec48..0000000000 --- a/target/linux/generic/patches-3.2/021-ssb_add_pci_id.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/ssb/b43_pci_bridge.c -+++ b/drivers/ssb/b43_pci_bridge.c -@@ -29,6 +29,8 @@ static const struct pci_device_id b43_pc - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, diff --git a/target/linux/generic/patches-3.2/025-bcma_backport.patch b/target/linux/generic/patches-3.2/025-bcma_backport.patch index fdb1b8dd2b..3149fd3ced 100644 --- a/target/linux/generic/patches-3.2/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.2/025-bcma_backport.patch @@ -1,3 +1,14 @@ +--- a/drivers/bcma/Kconfig ++++ b/drivers/bcma/Kconfig +@@ -29,7 +29,7 @@ config BCMA_HOST_PCI + + config BCMA_DRIVER_PCI_HOSTMODE + bool "Driver for PCI core working in hostmode" +- depends on BCMA && MIPS ++ depends on BCMA && MIPS && BCMA_HOST_PCI + help + PCI core hostmode operation (external PCI bus). + --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -13,12 +13,13 @@ @@ -29,277 +40,25 @@ #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ #endif ---- a/drivers/bcma/host_pci.c -+++ b/drivers/bcma/host_pci.c -@@ -21,48 +21,58 @@ static void bcma_host_pci_switch_core(st - pr_debug("Switched to core: 0x%X\n", core->id.id); - } - --static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) --{ -+/* Provides access to the requested core. Returns base offset that has to be -+ * used. It makes use of fixed windows when possible. */ -+static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) -+{ -+ switch (core->id.id) { -+ case BCMA_CORE_CHIPCOMMON: -+ return 3 * BCMA_CORE_SIZE; -+ case BCMA_CORE_PCIE: -+ return 2 * BCMA_CORE_SIZE; -+ } -+ - if (core->bus->mapped_core != core) - bcma_host_pci_switch_core(core); -+ return 0; -+} -+ -+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) -+{ -+ offset += bcma_host_pci_provide_access_to_core(core); - return ioread8(core->bus->mmio + offset); - } - - static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) - { -- if (core->bus->mapped_core != core) -- bcma_host_pci_switch_core(core); -+ offset += bcma_host_pci_provide_access_to_core(core); - return ioread16(core->bus->mmio + offset); - } - - static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) - { -- if (core->bus->mapped_core != core) -- bcma_host_pci_switch_core(core); -+ offset += bcma_host_pci_provide_access_to_core(core); - return ioread32(core->bus->mmio + offset); - } - - static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, - u8 value) - { -- if (core->bus->mapped_core != core) -- bcma_host_pci_switch_core(core); -+ offset += bcma_host_pci_provide_access_to_core(core); - iowrite8(value, core->bus->mmio + offset); - } - - static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, - u16 value) - { -- if (core->bus->mapped_core != core) -- bcma_host_pci_switch_core(core); -+ offset += bcma_host_pci_provide_access_to_core(core); - iowrite16(value, core->bus->mmio + offset); - } - - static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, - u32 value) - { -- if (core->bus->mapped_core != core) -- bcma_host_pci_switch_core(core); -+ offset += bcma_host_pci_provide_access_to_core(core); - iowrite32(value, core->bus->mmio + offset); - } - -@@ -144,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci - .awrite32 = bcma_host_pci_awrite32, - }; - --static int bcma_host_pci_probe(struct pci_dev *dev, -- const struct pci_device_id *id) -+static int __devinit bcma_host_pci_probe(struct pci_dev *dev, -+ const struct pci_device_id *id) - { - struct bcma_bus *bus; - int err = -ENOMEM; -@@ -225,41 +235,32 @@ static void bcma_host_pci_remove(struct - } - - #ifdef CONFIG_PM --static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) -+static int bcma_host_pci_suspend(struct device *dev) - { -- struct bcma_bus *bus = pci_get_drvdata(dev); -- -- /* Host specific */ -- pci_save_state(dev); -- pci_disable_device(dev); -- pci_set_power_state(dev, pci_choose_state(dev, state)); -+ struct pci_dev *pdev = to_pci_dev(dev); -+ struct bcma_bus *bus = pci_get_drvdata(pdev); - - bus->mapped_core = NULL; -- return 0; -+ -+ return bcma_bus_suspend(bus); - } - --static int bcma_host_pci_resume(struct pci_dev *dev) -+static int bcma_host_pci_resume(struct device *dev) - { -- struct bcma_bus *bus = pci_get_drvdata(dev); -- int err; -+ struct pci_dev *pdev = to_pci_dev(dev); -+ struct bcma_bus *bus = pci_get_drvdata(pdev); - -- /* Host specific */ -- pci_set_power_state(dev, 0); -- err = pci_enable_device(dev); -- if (err) -- return err; -- pci_restore_state(dev); -+ return bcma_bus_resume(bus); -+} - -- /* Bus specific */ -- err = bcma_bus_resume(bus); -- if (err) -- return err; -+static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, -+ bcma_host_pci_resume); -+#define BCMA_PM_OPS (&bcma_pm_ops) - -- return 0; --} - #else /* CONFIG_PM */ --# define bcma_host_pci_suspend NULL --# define bcma_host_pci_resume NULL -+ -+#define BCMA_PM_OPS NULL -+ - #endif /* CONFIG_PM */ - - static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { -@@ -277,8 +278,7 @@ static struct pci_driver bcma_pci_bridge - .id_table = bcma_pci_bridge_tbl, - .probe = bcma_host_pci_probe, - .remove = bcma_host_pci_remove, -- .suspend = bcma_host_pci_suspend, -- .resume = bcma_host_pci_resume, -+ .driver.pm = BCMA_PM_OPS, - }; - - int __init bcma_host_pci_init(void) ---- a/drivers/bcma/main.c -+++ b/drivers/bcma/main.c -@@ -13,6 +13,12 @@ - MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); - MODULE_LICENSE("GPL"); - -+/* contains the number the next bus should get. */ -+static unsigned int bcma_bus_next_num = 0; -+ -+/* bcma_buses_mutex locks the bcma_bus_next_num */ -+static DEFINE_MUTEX(bcma_buses_mutex); -+ - static int bcma_bus_match(struct device *dev, struct device_driver *drv); - static int bcma_device_probe(struct device *dev); - static int bcma_device_remove(struct device *dev); -@@ -55,7 +61,7 @@ static struct bus_type bcma_bus_type = { - .dev_attrs = bcma_device_attrs, - }; - --static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) -+struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) - { - struct bcma_device *core; - -@@ -65,6 +71,7 @@ static struct bcma_device *bcma_find_cor - } - return NULL; - } -+EXPORT_SYMBOL_GPL(bcma_find_core); - - static void bcma_release_core_dev(struct device *dev) - { -@@ -93,7 +100,7 @@ static int bcma_register_cores(struct bc - - core->dev.release = bcma_release_core_dev; - core->dev.bus = &bcma_bus_type; -- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); -+ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); - - switch (bus->hosttype) { - case BCMA_HOSTTYPE_PCI: -@@ -132,11 +139,15 @@ static void bcma_unregister_cores(struct - } - } - --int bcma_bus_register(struct bcma_bus *bus) -+int __devinit bcma_bus_register(struct bcma_bus *bus) - { - int err; - struct bcma_device *core; - -+ mutex_lock(&bcma_buses_mutex); -+ bus->num = bcma_bus_next_num++; -+ mutex_unlock(&bcma_buses_mutex); -+ - /* Scan for devices (cores) */ - err = bcma_bus_scan(bus); - if (err) { -@@ -169,10 +180,8 @@ int bcma_bus_register(struct bcma_bus *b - err = bcma_sprom_get(bus); - if (err == -ENOENT) { - pr_err("No SPROM available\n"); -- } else if (err) { -+ } else if (err) - pr_err("Failed to get SPROM: %d\n", err); -- return -ENOENT; -- } +--- a/drivers/bcma/core.c ++++ b/drivers/bcma/core.c +@@ -30,6 +30,7 @@ void bcma_core_disable(struct bcma_devic + udelay(10); - /* Register found cores */ - bcma_register_cores(bus); -@@ -241,6 +250,21 @@ int __init bcma_bus_early_register(struc + bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); ++ bcma_aread32(core, BCMA_RESET_CTL); + udelay(1); } - - #ifdef CONFIG_PM -+int bcma_bus_suspend(struct bcma_bus *bus) -+{ -+ struct bcma_device *core; -+ -+ list_for_each_entry(core, &bus->cores, list) { -+ struct device_driver *drv = core->dev.driver; -+ if (drv) { -+ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); -+ if (adrv->suspend) -+ adrv->suspend(core); -+ } -+ } -+ return 0; -+} -+ - int bcma_bus_resume(struct bcma_bus *bus) - { - struct bcma_device *core; -@@ -252,6 +276,15 @@ int bcma_bus_resume(struct bcma_bus *bus - bcma_core_chipcommon_init(&bus->drv_cc); + EXPORT_SYMBOL_GPL(bcma_core_disable); +@@ -77,7 +78,7 @@ void bcma_core_set_clockmode(struct bcma + pr_err("HT force timeout\n"); + break; + case BCMA_CLKMODE_DYNAMIC: +- pr_warn("Dynamic clockmode not supported yet!\n"); ++ bcma_set32(core, BCMA_CLKCTLST, ~BCMA_CLKCTLST_FORCEHT); + break; } - -+ list_for_each_entry(core, &bus->cores, list) { -+ struct device_driver *drv = core->dev.driver; -+ if (drv) { -+ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); -+ if (adrv->resume) -+ adrv->resume(core); -+ } -+ } -+ - return 0; } - #endif ---- a/drivers/bcma/Kconfig -+++ b/drivers/bcma/Kconfig -@@ -29,7 +29,7 @@ config BCMA_HOST_PCI - - config BCMA_DRIVER_PCI_HOSTMODE - bool "Driver for PCI core working in hostmode" -- depends on BCMA && MIPS -+ depends on BCMA && MIPS && BCMA_HOST_PCI - help - PCI core hostmode operation (external PCI bus). - --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c @@ -80,6 +80,7 @@ static void bcma_pmu_resources_init(stru @@ -323,7 +82,7 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ -@@ -16,40 +17,41 @@ +@@ -16,40 +17,39 @@ * R/W ops. **************************************************/ @@ -338,7 +97,7 @@ + return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); } - #if 0 +-#if 0 static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) { - pcicore_write32(pc, 0x130, address); @@ -348,7 +107,7 @@ + pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); } - #endif +-#endif static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) { @@ -381,7 +140,7 @@ break; msleep(1); } -@@ -57,79 +59,84 @@ static void bcma_pcie_mdio_set_phy(struc +@@ -57,79 +57,84 @@ static void bcma_pcie_mdio_set_phy(struc static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) { @@ -497,7 +256,7 @@ } /************************************************** -@@ -138,72 +145,53 @@ static void bcma_pcie_mdio_write(struct +@@ -138,72 +143,90 @@ static void bcma_pcie_mdio_write(struct static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) { @@ -532,6 +291,41 @@ + bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, + BCMA_CORE_PCI_SERDES_PLL_CTRL, + tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); ++} ++ ++static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc) ++{ ++ struct bcma_device *core = pc->core; ++ u16 val16, core_index; ++ uint regoff; ++ ++ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET); ++ core_index = (u16)core->core_index; ++ ++ val16 = pcicore_read16(pc, regoff); ++ if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT) ++ != core_index) { ++ val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) | ++ (val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK); ++ pcicore_write16(pc, regoff, val16); ++ } ++} ++ ++/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */ ++/* Needs to happen when coming out of 'standby'/'hibernate' */ ++static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc) ++{ ++ u16 val16; ++ uint regoff; ++ ++ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_MISC_CONFIG); ++ ++ val16 = pcicore_read16(pc, regoff); ++ ++ if (!(val16 & BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST)) { ++ val16 |= BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST; ++ pcicore_write16(pc, regoff, val16); ++ } } /************************************************** @@ -541,7 +335,9 @@ -static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) { ++ bcma_core_pci_fixcfg(pc); bcma_pcicore_serdes_workaround(pc); ++ bcma_core_pci_config_fixup(pc); } -static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) @@ -593,6 +389,24 @@ } int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, +@@ -236,3 +259,17 @@ out: + return err; + } + EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); ++ ++void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) ++{ ++ u32 w; ++ ++ w = bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); ++ if (extend) ++ w |= BCMA_CORE_PCI_ASPMTIMER_EXTEND; ++ else ++ w &= ~BCMA_CORE_PCI_ASPMTIMER_EXTEND; ++ bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); ++ bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -2,13 +2,588 @@ @@ -718,7 +532,7 @@ + if (unlikely(!addr)) + goto out; + err = -ENOMEM; -+ mmio = ioremap_nocache(addr, len); ++ mmio = ioremap_nocache(addr, sizeof(val)); + if (!mmio) + goto out; + @@ -770,7 +584,7 @@ + addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; + addr |= (func << 8); + addr |= (off & 0xfc); -+ mmio = ioremap_nocache(addr, len); ++ mmio = ioremap_nocache(addr, sizeof(val)); + if (!mmio) + goto out; + } @@ -779,7 +593,7 @@ + if (unlikely(!addr)) + goto out; + err = -ENOMEM; -+ mmio = ioremap_nocache(addr, len); ++ mmio = ioremap_nocache(addr, sizeof(val)); + if (!mmio) + goto out; + @@ -1090,8 +904,8 @@ + /* Ok, ready to run, register it to the system. + * The following needs change, if we want to port hostmode + * to non-MIPS platform. */ -+ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, -+ 0x04000000); ++ io_map_base = (unsigned long)ioremap_nocache(pc_host->mem_resource.start, ++ resource_size(&pc_host->mem_resource)); + pc_host->pci_controller.io_map_base = io_map_base; + set_io_port_base(pc_host->pci_controller.io_map_base); + /* Give some time to the PCI controller to configure itself with the new @@ -1186,9 +1000,387 @@ + return bcma_core_mips_irq(pc_host->pdev->core) + 2; } +EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq); +--- a/drivers/bcma/host_pci.c ++++ b/drivers/bcma/host_pci.c +@@ -21,48 +21,58 @@ static void bcma_host_pci_switch_core(st + pr_debug("Switched to core: 0x%X\n", core->id.id); + } + +-static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) +-{ ++/* Provides access to the requested core. Returns base offset that has to be ++ * used. It makes use of fixed windows when possible. */ ++static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core) ++{ ++ switch (core->id.id) { ++ case BCMA_CORE_CHIPCOMMON: ++ return 3 * BCMA_CORE_SIZE; ++ case BCMA_CORE_PCIE: ++ return 2 * BCMA_CORE_SIZE; ++ } ++ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); ++ return 0; ++} ++ ++static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) ++{ ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread8(core->bus->mmio + offset); + } + + static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread16(core->bus->mmio + offset); + } + + static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + return ioread32(core->bus->mmio + offset); + } + + static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite8(value, core->bus->mmio + offset); + } + + static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite16(value, core->bus->mmio + offset); + } + + static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) + { +- if (core->bus->mapped_core != core) +- bcma_host_pci_switch_core(core); ++ offset += bcma_host_pci_provide_access_to_core(core); + iowrite32(value, core->bus->mmio + offset); + } + +@@ -144,8 +154,8 @@ const struct bcma_host_ops bcma_host_pci + .awrite32 = bcma_host_pci_awrite32, + }; + +-static int bcma_host_pci_probe(struct pci_dev *dev, +- const struct pci_device_id *id) ++static int __devinit bcma_host_pci_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) + { + struct bcma_bus *bus; + int err = -ENOMEM; +@@ -191,6 +201,9 @@ static int bcma_host_pci_probe(struct pc + bus->hosttype = BCMA_HOSTTYPE_PCI; + bus->ops = &bcma_host_pci_ops; + ++ bus->boardinfo.vendor = bus->host_pci->subsystem_vendor; ++ bus->boardinfo.type = bus->host_pci->subsystem_device; ++ + /* Register */ + err = bcma_bus_register(bus); + if (err) +@@ -212,7 +225,7 @@ err_kfree_bus: + return err; + } + +-static void bcma_host_pci_remove(struct pci_dev *dev) ++static void __devexit bcma_host_pci_remove(struct pci_dev *dev) + { + struct bcma_bus *bus = pci_get_drvdata(dev); + +@@ -225,41 +238,32 @@ static void bcma_host_pci_remove(struct + } + + #ifdef CONFIG_PM +-static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state) ++static int bcma_host_pci_suspend(struct device *dev) + { +- struct bcma_bus *bus = pci_get_drvdata(dev); +- +- /* Host specific */ +- pci_save_state(dev); +- pci_disable_device(dev); +- pci_set_power_state(dev, pci_choose_state(dev, state)); ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + + bus->mapped_core = NULL; +- return 0; ++ ++ return bcma_bus_suspend(bus); + } + +-static int bcma_host_pci_resume(struct pci_dev *dev) ++static int bcma_host_pci_resume(struct device *dev) + { +- struct bcma_bus *bus = pci_get_drvdata(dev); +- int err; ++ struct pci_dev *pdev = to_pci_dev(dev); ++ struct bcma_bus *bus = pci_get_drvdata(pdev); + +- /* Host specific */ +- pci_set_power_state(dev, 0); +- err = pci_enable_device(dev); +- if (err) +- return err; +- pci_restore_state(dev); ++ return bcma_bus_resume(bus); ++} + +- /* Bus specific */ +- err = bcma_bus_resume(bus); +- if (err) +- return err; ++static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bcma_host_pci_suspend, ++ bcma_host_pci_resume); ++#define BCMA_PM_OPS (&bcma_pm_ops) + +- return 0; +-} + #else /* CONFIG_PM */ +-# define bcma_host_pci_suspend NULL +-# define bcma_host_pci_resume NULL ++ ++#define BCMA_PM_OPS NULL ++ + #endif /* CONFIG_PM */ + + static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { +@@ -276,9 +280,8 @@ static struct pci_driver bcma_pci_bridge + .name = "bcma-pci-bridge", + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, +- .remove = bcma_host_pci_remove, +- .suspend = bcma_host_pci_suspend, +- .resume = bcma_host_pci_resume, ++ .remove = __devexit_p(bcma_host_pci_remove), ++ .driver.pm = BCMA_PM_OPS, + }; + + int __init bcma_host_pci_init(void) +--- a/drivers/bcma/main.c ++++ b/drivers/bcma/main.c +@@ -13,6 +13,12 @@ + MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); + MODULE_LICENSE("GPL"); + ++/* contains the number the next bus should get. */ ++static unsigned int bcma_bus_next_num = 0; ++ ++/* bcma_buses_mutex locks the bcma_bus_next_num */ ++static DEFINE_MUTEX(bcma_buses_mutex); ++ + static int bcma_bus_match(struct device *dev, struct device_driver *drv); + static int bcma_device_probe(struct device *dev); + static int bcma_device_remove(struct device *dev); +@@ -55,7 +61,7 @@ static struct bus_type bcma_bus_type = { + .dev_attrs = bcma_device_attrs, + }; + +-static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) ++struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) + { + struct bcma_device *core; + +@@ -65,6 +71,7 @@ static struct bcma_device *bcma_find_cor + } + return NULL; + } ++EXPORT_SYMBOL_GPL(bcma_find_core); + + static void bcma_release_core_dev(struct device *dev) + { +@@ -93,7 +100,7 @@ static int bcma_register_cores(struct bc + + core->dev.release = bcma_release_core_dev; + core->dev.bus = &bcma_bus_type; +- dev_set_name(&core->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); ++ dev_set_name(&core->dev, "bcma%d:%d", bus->num, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: +@@ -132,11 +139,15 @@ static void bcma_unregister_cores(struct + } + } + +-int bcma_bus_register(struct bcma_bus *bus) ++int __devinit bcma_bus_register(struct bcma_bus *bus) + { + int err; + struct bcma_device *core; + ++ mutex_lock(&bcma_buses_mutex); ++ bus->num = bcma_bus_next_num++; ++ mutex_unlock(&bcma_buses_mutex); ++ + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { +@@ -169,10 +180,8 @@ int bcma_bus_register(struct bcma_bus *b + err = bcma_sprom_get(bus); + if (err == -ENOENT) { + pr_err("No SPROM available\n"); +- } else if (err) { ++ } else if (err) + pr_err("Failed to get SPROM: %d\n", err); +- return -ENOENT; +- } + + /* Register found cores */ + bcma_register_cores(bus); +@@ -241,6 +250,21 @@ int __init bcma_bus_early_register(struc + } + + #ifdef CONFIG_PM ++int bcma_bus_suspend(struct bcma_bus *bus) ++{ ++ struct bcma_device *core; ++ ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->suspend) ++ adrv->suspend(core); ++ } ++ } ++ return 0; ++} ++ + int bcma_bus_resume(struct bcma_bus *bus) + { + struct bcma_device *core; +@@ -252,6 +276,15 @@ int bcma_bus_resume(struct bcma_bus *bus + bcma_core_chipcommon_init(&bus->drv_cc); + } + ++ list_for_each_entry(core, &bus->cores, list) { ++ struct device_driver *drv = core->dev.driver; ++ if (drv) { ++ struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); ++ if (adrv->resume) ++ adrv->resume(core); ++ } ++ } ++ + return 0; + } + #endif --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c -@@ -212,6 +212,17 @@ static struct bcma_device *bcma_find_cor +@@ -19,7 +19,14 @@ struct bcma_device_id_name { + u16 id; + const char *name; + }; +-struct bcma_device_id_name bcma_device_names[] = { ++ ++static const struct bcma_device_id_name bcma_arm_device_names[] = { ++ { BCMA_CORE_ARM_1176, "ARM 1176" }, ++ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, ++ { BCMA_CORE_ARM_CM3, "ARM CM3" }, ++}; ++ ++static const struct bcma_device_id_name bcma_bcm_device_names[] = { + { BCMA_CORE_OOB_ROUTER, "OOB Router" }, + { BCMA_CORE_INVALID, "Invalid" }, + { BCMA_CORE_CHIPCOMMON, "ChipCommon" }, +@@ -27,7 +34,6 @@ struct bcma_device_id_name bcma_device_n + { BCMA_CORE_SRAM, "SRAM" }, + { BCMA_CORE_SDRAM, "SDRAM" }, + { BCMA_CORE_PCI, "PCI" }, +- { BCMA_CORE_MIPS, "MIPS" }, + { BCMA_CORE_ETHERNET, "Fast Ethernet" }, + { BCMA_CORE_V90, "V90" }, + { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" }, +@@ -44,7 +50,6 @@ struct bcma_device_id_name bcma_device_n + { BCMA_CORE_PHY_A, "PHY A" }, + { BCMA_CORE_PHY_B, "PHY B" }, + { BCMA_CORE_PHY_G, "PHY G" }, +- { BCMA_CORE_MIPS_3302, "MIPS 3302" }, + { BCMA_CORE_USB11_HOST, "USB 1.1 Host" }, + { BCMA_CORE_USB11_DEV, "USB 1.1 Device" }, + { BCMA_CORE_USB20_HOST, "USB 2.0 Host" }, +@@ -58,15 +63,11 @@ struct bcma_device_id_name bcma_device_n + { BCMA_CORE_PHY_N, "PHY N" }, + { BCMA_CORE_SRAM_CTL, "SRAM Controller" }, + { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" }, +- { BCMA_CORE_ARM_1176, "ARM 1176" }, +- { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, + { BCMA_CORE_PHY_LP, "PHY LP" }, + { BCMA_CORE_PMU, "PMU" }, + { BCMA_CORE_PHY_SSN, "PHY SSN" }, + { BCMA_CORE_SDIO_DEV, "SDIO Device" }, +- { BCMA_CORE_ARM_CM3, "ARM CM3" }, + { BCMA_CORE_PHY_HT, "PHY HT" }, +- { BCMA_CORE_MIPS_74K, "MIPS 74K" }, + { BCMA_CORE_MAC_GBIT, "GBit MAC" }, + { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" }, + { BCMA_CORE_PCIE_RC, "PCIe Root Complex" }, +@@ -79,16 +80,41 @@ struct bcma_device_id_name bcma_device_n + { BCMA_CORE_SHIM, "SHIM" }, + { BCMA_CORE_DEFAULT, "Default" }, + }; +-const char *bcma_device_name(struct bcma_device_id *id) ++ ++static const struct bcma_device_id_name bcma_mips_device_names[] = { ++ { BCMA_CORE_MIPS, "MIPS" }, ++ { BCMA_CORE_MIPS_3302, "MIPS 3302" }, ++ { BCMA_CORE_MIPS_74K, "MIPS 74K" }, ++}; ++ ++static const char *bcma_device_name(const struct bcma_device_id *id) + { +- int i; ++ const struct bcma_device_id_name *names; ++ int size, i; + +- if (id->manuf == BCMA_MANUF_BCM) { +- for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) { +- if (bcma_device_names[i].id == id->id) +- return bcma_device_names[i].name; +- } ++ /* search manufacturer specific names */ ++ switch (id->manuf) { ++ case BCMA_MANUF_ARM: ++ names = bcma_arm_device_names; ++ size = ARRAY_SIZE(bcma_arm_device_names); ++ break; ++ case BCMA_MANUF_BCM: ++ names = bcma_bcm_device_names; ++ size = ARRAY_SIZE(bcma_bcm_device_names); ++ break; ++ case BCMA_MANUF_MIPS: ++ names = bcma_mips_device_names; ++ size = ARRAY_SIZE(bcma_mips_device_names); ++ break; ++ default: ++ return "UNKNOWN"; ++ } ++ ++ for (i = 0; i < size; i++) { ++ if (names[i].id == id->id) ++ return names[i].name; + } ++ + return "UNKNOWN"; + } + +@@ -212,6 +238,17 @@ static struct bcma_device *bcma_find_cor return NULL; } @@ -1206,7 +1398,7 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, struct bcma_device_id *match, int core_num, struct bcma_device *core) -@@ -353,6 +364,7 @@ static int bcma_get_next_core(struct bcm +@@ -353,6 +390,7 @@ static int bcma_get_next_core(struct bcm void bcma_init_bus(struct bcma_bus *bus) { s32 tmp; @@ -1214,7 +1406,7 @@ if (bus->init_done) return; -@@ -363,9 +375,12 @@ void bcma_init_bus(struct bcma_bus *bus) +@@ -363,9 +401,12 @@ void bcma_init_bus(struct bcma_bus *bus) bcma_scan_switch_core(bus, BCMA_ADDR_BASE); tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); @@ -1230,7 +1422,7 @@ bus->init_done = true; } -@@ -392,6 +407,7 @@ int bcma_bus_scan(struct bcma_bus *bus) +@@ -392,6 +433,7 @@ int bcma_bus_scan(struct bcma_bus *bus) bcma_scan_switch_core(bus, erombase); while (eromptr < eromend) { @@ -1238,7 +1430,7 @@ struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); if (!core) return -ENOMEM; -@@ -399,18 +415,23 @@ int bcma_bus_scan(struct bcma_bus *bus) +@@ -399,18 +441,23 @@ int bcma_bus_scan(struct bcma_bus *bus) core->bus = bus; err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core); @@ -1340,7 +1532,7 @@ /************************************************** * R/W ops. -@@ -124,37 +176,253 @@ static int bcma_sprom_valid(const u16 *s +@@ -124,37 +176,403 @@ static int bcma_sprom_valid(const u16 *s * SPROM extraction. **************************************************/ @@ -1349,6 +1541,22 @@ +#define SPEX(_field, _offset, _mask, _shift) \ + bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) + ++#define SPEX32(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((((u32)sprom[SPOFF((_offset)+2)] << 16 | \ ++ sprom[SPOFF(_offset)]) & (_mask)) >> (_shift)) ++ ++#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \ ++ do { \ ++ SPEX(_field[0], _offset + 0, _mask, _shift); \ ++ SPEX(_field[1], _offset + 2, _mask, _shift); \ ++ SPEX(_field[2], _offset + 4, _mask, _shift); \ ++ SPEX(_field[3], _offset + 6, _mask, _shift); \ ++ SPEX(_field[4], _offset + 8, _mask, _shift); \ ++ SPEX(_field[5], _offset + 10, _mask, _shift); \ ++ SPEX(_field[6], _offset + 12, _mask, _shift); \ ++ SPEX(_field[7], _offset + 14, _mask, _shift); \ ++ } while (0) ++ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) { - u16 v; @@ -1417,7 +1625,8 @@ + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); + SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); + -+ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); + + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { @@ -1472,6 +1681,136 @@ + SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, + SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, ++ SSB_SPROM8_ANTAVAIL_A_SHIFT); ++ SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, ++ SSB_SPROM8_ANTAVAIL_BG_SHIFT); ++ SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0); ++ SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG, ++ SSB_SPROM8_ITSSI_BG_SHIFT); ++ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); ++ SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, ++ SSB_SPROM8_ITSSI_A_SHIFT); ++ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); ++ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, ++ SSB_SPROM8_MAXP_AL_SHIFT); ++ SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); ++ SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, ++ SSB_SPROM8_GPIOA_P1_SHIFT); ++ SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); ++ SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, ++ SSB_SPROM8_GPIOB_P3_SHIFT); ++ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); ++ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, ++ SSB_SPROM8_TRI5G_SHIFT); ++ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); ++ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, ++ SSB_SPROM8_TRI5GH_SHIFT); ++ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, ++ SSB_SPROM8_RXPO2G_SHIFT); ++ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, ++ SSB_SPROM8_RXPO5G_SHIFT); ++ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); ++ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, ++ SSB_SPROM8_RSSISMC2G_SHIFT); ++ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, ++ SSB_SPROM8_RSSISAV2G_SHIFT); ++ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, ++ SSB_SPROM8_BXA2G_SHIFT); ++ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); ++ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, ++ SSB_SPROM8_RSSISMC5G_SHIFT); ++ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, ++ SSB_SPROM8_RSSISAV5G_SHIFT); ++ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, ++ SSB_SPROM8_BXA5G_SHIFT); ++ ++ SPEX(pa0b0, SSB_SPROM8_PA0B0, ~0, 0); ++ SPEX(pa0b1, SSB_SPROM8_PA0B1, ~0, 0); ++ SPEX(pa0b2, SSB_SPROM8_PA0B2, ~0, 0); ++ SPEX(pa1b0, SSB_SPROM8_PA1B0, ~0, 0); ++ SPEX(pa1b1, SSB_SPROM8_PA1B1, ~0, 0); ++ SPEX(pa1b2, SSB_SPROM8_PA1B2, ~0, 0); ++ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, ~0, 0); ++ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, ~0, 0); ++ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, ~0, 0); ++ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, ~0, 0); ++ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, ~0, 0); ++ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, ~0, 0); ++ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, ~0, 0); ++ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, ~0, 0); ++ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, ~0, 0); ++ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, ~0, 0); ++ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, ~0, 0); ++ ++ /* Extract the antenna gain values. */ ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, ++ SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, ++ SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, ++ SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, ++ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); ++ ++ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON, ++ SSB_SPROM8_LEDDC_ON_SHIFT); ++ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF, ++ SSB_SPROM8_LEDDC_OFF_SHIFT); ++ ++ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN, ++ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT); ++ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN, ++ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT); ++ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH, ++ SSB_SPROM8_TXRXC_SWITCH_SHIFT); ++ ++ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0); ++ ++ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0); ++ ++ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP, ++ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT); ++ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER, ++ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT); ++ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT); ++ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX, ++ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT); ++ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT); ++ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT); ++ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT); ++ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL, ++ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT); ++ ++ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0); ++ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0); ++ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0); ++ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0); ++ ++ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH, ++ SSB_SPROM8_THERMAL_TRESH_SHIFT); ++ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET, ++ SSB_SPROM8_THERMAL_OFFSET_SHIFT); ++ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_PHYCAL, ++ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT); ++ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD, ++ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT); ++ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT); +} + +/* @@ -1491,7 +1830,8 @@ + BCMA_CC_SROM_CONTROL); + return srom_control & BCMA_CC_SROM_CONTROL_PRESENT; + } -+ + +- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; + /* older chipcommon revisions use chip status register */ + chip_status = bcma_read32(bus->drv_cc.core, BCMA_CC_CHIPSTAT); + switch (bus->chipinfo.id) { @@ -1539,8 +1879,7 @@ + present = false; + break; + } - -- bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)]; ++ + if (present) { + otpsize = bus->drv_cc.capabilities & BCMA_CC_CAP_OTPS; + otpsize >>= BCMA_CC_CAP_OTPS_SHIFT; @@ -1582,16 +1921,19 @@ - if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) - return -ENOENT; + if (!bcma_sprom_ext_available(bus)) { ++ bool sprom_onchip; ++ + /* + * External SPROM takes precedence so check + * on-chip OTP only when no external SPROM + * is present. + */ -+ if (bcma_sprom_onchip_available(bus)) { ++ sprom_onchip = bcma_sprom_onchip_available(bus); ++ if (sprom_onchip) { + /* determine offset */ + offset = bcma_sprom_onchip_offset(bus); + } -+ if (!offset) { ++ if (!offset || !sprom_onchip) { + /* + * Maybe there is no SPROM on the device? + * Now we ask the arch code if there is some sprom @@ -1604,7 +1946,7 @@ sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); -@@ -164,11 +432,7 @@ int bcma_sprom_get(struct bcma_bus *bus) +@@ -164,11 +582,7 @@ int bcma_sprom_get(struct bcma_bus *bus) if (bus->chipinfo.id == 0x4331) bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); @@ -1619,7 +1961,19 @@ if (bus->chipinfo.id == 0x4331) --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h -@@ -136,6 +136,7 @@ struct bcma_device { +@@ -26,6 +26,11 @@ struct bcma_chipinfo { + u8 pkg; + }; + ++struct bcma_boardinfo { ++ u16 vendor; ++ u16 type; ++}; ++ + enum bcma_clkmode { + BCMA_CLKMODE_FAST, + BCMA_CLKMODE_DYNAMIC, +@@ -136,6 +141,7 @@ struct bcma_device { bool dev_registered; u8 core_index; @@ -1627,7 +1981,7 @@ u32 addr; u32 wrap; -@@ -162,7 +163,7 @@ struct bcma_driver { +@@ -162,7 +168,7 @@ struct bcma_driver { int (*probe)(struct bcma_device *dev); void (*remove)(struct bcma_device *dev); @@ -1636,7 +1990,7 @@ int (*resume)(struct bcma_device *dev); void (*shutdown)(struct bcma_device *dev); -@@ -175,6 +176,12 @@ int __bcma_driver_register(struct bcma_d +@@ -175,6 +181,12 @@ int __bcma_driver_register(struct bcma_d extern void bcma_driver_unregister(struct bcma_driver *drv); @@ -1649,7 +2003,13 @@ struct bcma_bus { /* The MMIO area. */ void __iomem *mmio; -@@ -195,6 +202,7 @@ struct bcma_bus { +@@ -191,10 +203,13 @@ struct bcma_bus { + + struct bcma_chipinfo chipinfo; + ++ struct bcma_boardinfo boardinfo; ++ + struct bcma_device *mapped_core; struct list_head cores; u8 nr_cores; u8 init_done:1; @@ -1657,7 +2017,7 @@ struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; -@@ -205,62 +213,84 @@ struct bcma_bus { +@@ -205,62 +220,84 @@ struct bcma_bus { struct ssb_sprom sprom; }; @@ -1832,7 +2192,7 @@ #define BCMA_CC_PMU5_MAINPLL_CPU 1 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -53,6 +53,35 @@ struct pci_dev; +@@ -53,11 +53,47 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 @@ -1868,7 +2228,19 @@ #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ -@@ -72,20 +101,114 @@ struct pci_dev; + #define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */ + #define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */ ++#define BCMA_CORE_PCI_SPROM_PI_OFFSET 0 /* first word */ ++#define BCMA_CORE_PCI_SPROM_PI_MASK 0xf000 /* bit 15:12 */ ++#define BCMA_CORE_PCI_SPROM_PI_SHIFT 12 /* bit 15:12 */ ++#define BCMA_CORE_PCI_SPROM_MISC_CONFIG 5 /* word 5 */ ++#define BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */ ++#define BCMA_CORE_PCI_SPROM_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */ ++#define BCMA_CORE_PCI_SPROM_CLKREQ_ENB 0x0800 /* bit 11 */ + + /* SBtoPCIx */ + #define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000 +@@ -72,20 +108,118 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ @@ -1904,6 +2276,7 @@ +#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ +#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ +#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_ASPMTIMER_EXTEND 0x01000000 /* > rev7: enable extend ASPM timer */ +#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ @@ -1972,17 +2345,20 @@ }; /* Register access */ ++#define pcicore_read16(pc, offset) bcma_read16((pc)->core, offset) #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) ++#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val) #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) -extern void bcma_core_pci_init(struct bcma_drv_pci *pc); +extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable); - ++extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); ++ +extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); +extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); -+ + #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h diff --git a/target/linux/generic/patches-3.3/020-ssb_update.patch b/target/linux/generic/patches-3.3/020-ssb_update.patch index 708c7ded34..01e087a316 100644 --- a/target/linux/generic/patches-3.3/020-ssb_update.patch +++ b/target/linux/generic/patches-3.3/020-ssb_update.patch @@ -1,3 +1,14 @@ +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -29,6 +29,8 @@ static const struct pci_device_id b43_pc + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c @@ -13,6 +13,9 @@ @@ -149,7 +160,26 @@ &clkctl_n, &clkctl_m); --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c -@@ -331,7 +331,6 @@ static void sprom_extract_r123(struct ss +@@ -178,6 +178,18 @@ err_pci: + #define SPEX(_outvar, _offset, _mask, _shift) \ + SPEX16(_outvar, _offset, _mask, _shift) + ++#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \ ++ do { \ ++ SPEX(_field[0], _offset + 0, _mask, _shift); \ ++ SPEX(_field[1], _offset + 2, _mask, _shift); \ ++ SPEX(_field[2], _offset + 4, _mask, _shift); \ ++ SPEX(_field[3], _offset + 6, _mask, _shift); \ ++ SPEX(_field[4], _offset + 8, _mask, _shift); \ ++ SPEX(_field[5], _offset + 10, _mask, _shift); \ ++ SPEX(_field[6], _offset + 12, _mask, _shift); \ ++ SPEX(_field[7], _offset + 14, _mask, _shift); \ ++ } while (0) ++ + + static inline u8 ssb_crc8(u8 crc, u8 data) + { +@@ -331,7 +343,6 @@ static void sprom_extract_r123(struct ss { int i; u16 v; @@ -157,8 +187,24 @@ u16 loc[3]; if (out->revision == 3) /* rev 3 moved MAC */ -@@ -390,20 +389,12 @@ static void sprom_extract_r123(struct ss +@@ -361,8 +372,9 @@ static void sprom_extract_r123(struct ss + SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14); + SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15); + SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0); +- SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, +- SSB_SPROM1_BINF_CCODE_SHIFT); ++ if (out->revision == 1) ++ SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE, ++ SSB_SPROM1_BINF_CCODE_SHIFT); + SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA, + SSB_SPROM1_BINF_ANTA_SHIFT); + SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG, +@@ -388,22 +400,16 @@ static void sprom_extract_r123(struct ss + SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0); + if (out->revision >= 2) SPEX(boardflags_hi, SSB_SPROM2_BFLHI, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM1_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM1_CCODE, 0x00ff, 0); /* Extract the antenna gain values. */ - gain = r123_extract_antgain(out->revision, in, @@ -184,7 +230,27 @@ } /* Revs 4 5 and 8 have partially shared layout */ -@@ -504,16 +495,14 @@ static void sprom_extract_r45(struct ssb +@@ -464,14 +470,17 @@ static void sprom_extract_r45(struct ssb + SPEX(et0phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET0A, 0); + SPEX(et1phyaddr, SSB_SPROM4_ETHPHY, SSB_SPROM4_ETHPHY_ET1A, + SSB_SPROM4_ETHPHY_ET1A_SHIFT); ++ SPEX(board_rev, SSB_SPROM4_BOARDREV, 0xFFFF, 0); + if (out->revision == 4) { +- SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM4_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM4_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0); + SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0); + } else { +- SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM5_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM5_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0); +@@ -504,16 +513,14 @@ static void sprom_extract_r45(struct ssb } /* Extract the antenna gain values. */ @@ -205,7 +271,7 @@ sprom_extract_r458(out, in); -@@ -523,7 +512,13 @@ static void sprom_extract_r45(struct ssb +@@ -523,14 +530,22 @@ static void sprom_extract_r45(struct ssb static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) { int i; @@ -220,7 +286,17 @@ /* extract the MAC address */ for (i = 0; i < 3; i++) { -@@ -596,16 +591,46 @@ static void sprom_extract_r8(struct ssb_ + v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); + } +- SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); ++ SPEX(board_rev, SSB_SPROM8_BOARDREV, 0xFFFF, 0); ++ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); + SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); +@@ -596,16 +611,46 @@ static void sprom_extract_r8(struct ssb_ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); /* Extract the antenna gain values. */ @@ -273,6 +349,78 @@ /* Extract FEM info */ SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, +@@ -630,6 +675,63 @@ static void sprom_extract_r8(struct ssb_ + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, + SSB_SROM8_FEM_ANTSWLUT, SSB_SROM8_FEM_ANTSWLUT_SHIFT); + ++ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON, ++ SSB_SPROM8_LEDDC_ON_SHIFT); ++ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF, ++ SSB_SPROM8_LEDDC_OFF_SHIFT); ++ ++ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN, ++ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT); ++ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN, ++ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT); ++ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH, ++ SSB_SPROM8_TXRXC_SWITCH_SHIFT); ++ ++ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0); ++ ++ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0); ++ ++ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP, ++ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT); ++ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER, ++ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT); ++ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT); ++ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX, ++ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT); ++ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT); ++ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT); ++ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT); ++ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL, ++ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT); ++ ++ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0); ++ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0); ++ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0); ++ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0); ++ ++ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH, ++ SSB_SPROM8_THERMAL_TRESH_SHIFT); ++ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET, ++ SSB_SPROM8_THERMAL_OFFSET_SHIFT); ++ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_PHYCAL, ++ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT); ++ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD, ++ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT); ++ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT); + sprom_extract_r458(out, in); + + /* TODO - get remaining rev 8 stuff needed */ +@@ -759,7 +861,6 @@ static void ssb_pci_get_boardinfo(struct + { + bi->vendor = bus->host_pci->subsystem_vendor; + bi->type = bus->host_pci->subsystem_device; +- bi->rev = bus->host_pci->revision; + } + + int ssb_pci_get_invariants(struct ssb_bus *bus, --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -676,14 +676,10 @@ static int ssb_pcmcia_do_get_invariants( @@ -414,7 +562,7 @@ } antenna_gain; struct { -@@ -103,7 +109,79 @@ struct ssb_sprom { +@@ -103,14 +109,85 @@ struct ssb_sprom { } ghz5; } fem; @@ -495,6 +643,13 @@ }; /* Information about the PCB the circuitry is soldered on. */ + struct ssb_boardinfo { + u16 vendor; + u16 type; +- u8 rev; + }; + + --- a/include/linux/ssb/ssb_driver_gige.h +++ b/include/linux/ssb/ssb_driver_gige.h @@ -2,6 +2,7 @@ @@ -507,10 +662,96 @@ --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h -@@ -449,6 +449,39 @@ - #define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 - #define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 - #define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA +@@ -228,6 +228,7 @@ + #define SSB_SPROM1_AGAIN_BG_SHIFT 0 + #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_AGAIN_A_SHIFT 8 ++#define SSB_SPROM1_CCODE 0x0076 + + /* SPROM Revision 2 (inherits from rev 1) */ + #define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ +@@ -267,6 +268,7 @@ + #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ + + /* SPROM Revision 4 */ ++#define SSB_SPROM4_BOARDREV 0x0042 /* Board revision */ + #define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ + #define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ + #define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */ +@@ -389,6 +391,11 @@ + #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM8_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM8_LEDDC 0x009A ++#define SSB_SPROM8_LEDDC_ON 0xFF00 /* oncount */ ++#define SSB_SPROM8_LEDDC_ON_SHIFT 8 ++#define SSB_SPROM8_LEDDC_OFF 0x00FF /* offcount */ ++#define SSB_SPROM8_LEDDC_OFF_SHIFT 0 + #define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ + #define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ + #define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 +@@ -404,6 +411,13 @@ + #define SSB_SPROM8_AGAIN2_SHIFT 0 + #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM8_AGAIN3_SHIFT 8 ++#define SSB_SPROM8_TXRXC 0x00A2 ++#define SSB_SPROM8_TXRXC_TXCHAIN 0x000f ++#define SSB_SPROM8_TXRXC_TXCHAIN_SHIFT 0 ++#define SSB_SPROM8_TXRXC_RXCHAIN 0x00f0 ++#define SSB_SPROM8_TXRXC_RXCHAIN_SHIFT 4 ++#define SSB_SPROM8_TXRXC_SWITCH 0xff00 ++#define SSB_SPROM8_TXRXC_SWITCH_SHIFT 8 + #define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ + #define SSB_SPROM8_RSSISMF2G 0x000F + #define SSB_SPROM8_RSSISMC2G 0x00F0 +@@ -430,6 +444,7 @@ + #define SSB_SPROM8_TRI5GH_SHIFT 8 + #define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ + #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ ++#define SSB_SPROM8_RXPO2G_SHIFT 0 + #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ + #define SSB_SPROM8_RXPO5G_SHIFT 8 + #define SSB_SPROM8_FEM2G 0x00AE +@@ -445,10 +460,71 @@ + #define SSB_SROM8_FEM_ANTSWLUT 0xF800 + #define SSB_SROM8_FEM_ANTSWLUT_SHIFT 11 + #define SSB_SPROM8_THERMAL 0x00B2 +-#define SSB_SPROM8_MPWR_RAWTS 0x00B4 +-#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 +-#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 +-#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++#define SSB_SPROM8_THERMAL_OFFSET 0x00ff ++#define SSB_SPROM8_THERMAL_OFFSET_SHIFT 0 ++#define SSB_SPROM8_THERMAL_TRESH 0xff00 ++#define SSB_SPROM8_THERMAL_TRESH_SHIFT 8 ++/* Temp sense related entries */ ++#define SSB_SPROM8_RAWTS 0x00B4 ++#define SSB_SPROM8_RAWTS_RAWTEMP 0x01ff ++#define SSB_SPROM8_RAWTS_RAWTEMP_SHIFT 0 ++#define SSB_SPROM8_RAWTS_MEASPOWER 0xfe00 ++#define SSB_SPROM8_RAWTS_MEASPOWER_SHIFT 9 ++#define SSB_SPROM8_OPT_CORRX 0x00B6 ++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE 0x00ff ++#define SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT 0 ++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX 0xfc00 ++#define SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT 10 ++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION 0x0300 ++#define SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT 8 ++/* FOC: freiquency offset correction, HWIQ: H/W IOCAL enable, IQSWP: IQ CAL swap disable */ ++#define SSB_SPROM8_HWIQ_IQSWP 0x00B8 ++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR 0x000f ++#define SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT 0 ++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP 0x0010 ++#define SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT 4 ++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL 0x0020 ++#define SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT 5 ++#define SSB_SPROM8_TEMPDELTA 0x00BA ++#define SSB_SPROM8_TEMPDELTA_PHYCAL 0x00ff ++#define SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT 0 ++#define SSB_SPROM8_TEMPDELTA_PERIOD 0x0f00 ++#define SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT 8 ++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS 0xf000 ++#define SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT 12 + +/* There are 4 blocks with power info sharing the same layout */ +#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 @@ -547,7 +788,7 @@ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -@@ -473,6 +506,7 @@ +@@ -473,12 +549,23 @@ #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ #define SSB_SPROM8_PA1HIB1 0x00DA #define SSB_SPROM8_PA1HIB2 0x00DC @@ -555,3 +796,19 @@ #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + ++#define SSB_SPROM8_2G_MCSPO 0x0152 ++#define SSB_SPROM8_5G_MCSPO 0x0162 ++#define SSB_SPROM8_5GL_MCSPO 0x0172 ++#define SSB_SPROM8_5GH_MCSPO 0x0182 ++ ++#define SSB_SPROM8_CDDPO 0x0192 ++#define SSB_SPROM8_STBCPO 0x0194 ++#define SSB_SPROM8_BW40PO 0x0196 ++#define SSB_SPROM8_BWDUPPO 0x0198 ++ + /* Values for boardflags_lo read from SPROM */ + #define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ + #define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ diff --git a/target/linux/generic/patches-3.3/021-ssb_add_pci_id.patch b/target/linux/generic/patches-3.3/021-ssb_add_pci_id.patch deleted file mode 100644 index 7cffebec48..0000000000 --- a/target/linux/generic/patches-3.3/021-ssb_add_pci_id.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/ssb/b43_pci_bridge.c -+++ b/drivers/ssb/b43_pci_bridge.c -@@ -29,6 +29,8 @@ static const struct pci_device_id b43_pc - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4322) }, -+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43222) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4324) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4325) }, - { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4328) }, diff --git a/target/linux/generic/patches-3.3/025-bcma_backport.patch b/target/linux/generic/patches-3.3/025-bcma_backport.patch index 7117fbaf15..3fb7a564fa 100644 --- a/target/linux/generic/patches-3.3/025-bcma_backport.patch +++ b/target/linux/generic/patches-3.3/025-bcma_backport.patch @@ -34,6 +34,25 @@ #endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */ #endif +--- a/drivers/bcma/core.c ++++ b/drivers/bcma/core.c +@@ -30,6 +30,7 @@ void bcma_core_disable(struct bcma_devic + udelay(10); + + bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); ++ bcma_aread32(core, BCMA_RESET_CTL); + udelay(1); + } + EXPORT_SYMBOL_GPL(bcma_core_disable); +@@ -77,7 +78,7 @@ void bcma_core_set_clockmode(struct bcma + pr_err("HT force timeout\n"); + break; + case BCMA_CLKMODE_DYNAMIC: +- pr_warn("Dynamic clockmode not supported yet!\n"); ++ bcma_set32(core, BCMA_CLKCTLST, ~BCMA_CLKCTLST_FORCEHT); + break; + } + } --- a/drivers/bcma/driver_chipcommon_pmu.c +++ b/drivers/bcma/driver_chipcommon_pmu.c @@ -80,6 +80,7 @@ static void bcma_pmu_resources_init(stru @@ -57,7 +76,7 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ -@@ -16,40 +17,41 @@ +@@ -16,40 +17,39 @@ * R/W ops. **************************************************/ @@ -72,7 +91,7 @@ + return pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_DATA); } - #if 0 +-#if 0 static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) { - pcicore_write32(pc, 0x130, address); @@ -82,7 +101,7 @@ + pcicore_read32(pc, BCMA_CORE_PCI_PCIEIND_ADDR); + pcicore_write32(pc, BCMA_CORE_PCI_PCIEIND_DATA, data); } - #endif +-#endif static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) { @@ -115,7 +134,7 @@ break; msleep(1); } -@@ -57,79 +59,84 @@ static void bcma_pcie_mdio_set_phy(struc +@@ -57,79 +57,84 @@ static void bcma_pcie_mdio_set_phy(struc static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) { @@ -231,7 +250,7 @@ } /************************************************** -@@ -138,72 +145,53 @@ static void bcma_pcie_mdio_write(struct +@@ -138,72 +143,90 @@ static void bcma_pcie_mdio_write(struct static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) { @@ -266,6 +285,41 @@ + bcma_pcie_mdio_write(pc, BCMA_CORE_PCI_MDIODATA_DEV_PLL, + BCMA_CORE_PCI_SERDES_PLL_CTRL, + tmp & ~BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN); ++} ++ ++static void bcma_core_pci_fixcfg(struct bcma_drv_pci *pc) ++{ ++ struct bcma_device *core = pc->core; ++ u16 val16, core_index; ++ uint regoff; ++ ++ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_PI_OFFSET); ++ core_index = (u16)core->core_index; ++ ++ val16 = pcicore_read16(pc, regoff); ++ if (((val16 & BCMA_CORE_PCI_SPROM_PI_MASK) >> BCMA_CORE_PCI_SPROM_PI_SHIFT) ++ != core_index) { ++ val16 = (core_index << BCMA_CORE_PCI_SPROM_PI_SHIFT) | ++ (val16 & ~BCMA_CORE_PCI_SPROM_PI_MASK); ++ pcicore_write16(pc, regoff, val16); ++ } ++} ++ ++/* Fix MISC config to allow coming out of L2/L3-Ready state w/o PRST */ ++/* Needs to happen when coming out of 'standby'/'hibernate' */ ++static void bcma_core_pci_config_fixup(struct bcma_drv_pci *pc) ++{ ++ u16 val16; ++ uint regoff; ++ ++ regoff = BCMA_CORE_PCI_SPROM(BCMA_CORE_PCI_SPROM_MISC_CONFIG); ++ ++ val16 = pcicore_read16(pc, regoff); ++ ++ if (!(val16 & BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST)) { ++ val16 |= BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST; ++ pcicore_write16(pc, regoff, val16); ++ } } /************************************************** @@ -275,7 +329,9 @@ -static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) +static void __devinit bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc) { ++ bcma_core_pci_fixcfg(pc); bcma_pcicore_serdes_workaround(pc); ++ bcma_core_pci_config_fixup(pc); } -static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc) @@ -327,6 +383,24 @@ } int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, +@@ -236,3 +259,17 @@ out: + return err; + } + EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl); ++ ++void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend) ++{ ++ u32 w; ++ ++ w = bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); ++ if (extend) ++ w |= BCMA_CORE_PCI_ASPMTIMER_EXTEND; ++ else ++ w &= ~BCMA_CORE_PCI_ASPMTIMER_EXTEND; ++ bcma_pcie_write(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG, w); ++ bcma_pcie_read(pc, BCMA_CORE_PCI_DLLP_PMTHRESHREG); ++} ++EXPORT_SYMBOL_GPL(bcma_core_pci_extend_L1timer); --- a/drivers/bcma/driver_pci_host.c +++ b/drivers/bcma/driver_pci_host.c @@ -2,13 +2,588 @@ @@ -452,7 +526,7 @@ + if (unlikely(!addr)) + goto out; + err = -ENOMEM; -+ mmio = ioremap_nocache(addr, len); ++ mmio = ioremap_nocache(addr, sizeof(val)); + if (!mmio) + goto out; + @@ -504,7 +578,7 @@ + addr = pc->core->addr + BCMA_CORE_PCI_PCICFG0; + addr |= (func << 8); + addr |= (off & 0xfc); -+ mmio = ioremap_nocache(addr, len); ++ mmio = ioremap_nocache(addr, sizeof(val)); + if (!mmio) + goto out; + } @@ -513,7 +587,7 @@ + if (unlikely(!addr)) + goto out; + err = -ENOMEM; -+ mmio = ioremap_nocache(addr, len); ++ mmio = ioremap_nocache(addr, sizeof(val)); + if (!mmio) + goto out; + @@ -824,8 +898,8 @@ + /* Ok, ready to run, register it to the system. + * The following needs change, if we want to port hostmode + * to non-MIPS platform. */ -+ io_map_base = (unsigned long)ioremap_nocache(BCMA_SOC_PCI_MEM, -+ 0x04000000); ++ io_map_base = (unsigned long)ioremap_nocache(pc_host->mem_resource.start, ++ resource_size(&pc_host->mem_resource)); + pc_host->pci_controller.io_map_base = io_map_base; + set_io_port_base(pc_host->pci_controller.io_map_base); + /* Give some time to the PCI controller to configure itself with the new @@ -933,6 +1007,34 @@ { struct bcma_bus *bus; int err = -ENOMEM; +@@ -201,6 +201,9 @@ static int bcma_host_pci_probe(struct pc + bus->hosttype = BCMA_HOSTTYPE_PCI; + bus->ops = &bcma_host_pci_ops; + ++ bus->boardinfo.vendor = bus->host_pci->subsystem_vendor; ++ bus->boardinfo.type = bus->host_pci->subsystem_device; ++ + /* Register */ + err = bcma_bus_register(bus); + if (err) +@@ -222,7 +225,7 @@ err_kfree_bus: + return err; + } + +-static void bcma_host_pci_remove(struct pci_dev *dev) ++static void __devexit bcma_host_pci_remove(struct pci_dev *dev) + { + struct bcma_bus *bus = pci_get_drvdata(dev); + +@@ -277,7 +280,7 @@ static struct pci_driver bcma_pci_bridge + .name = "bcma-pci-bridge", + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, +- .remove = bcma_host_pci_remove, ++ .remove = __devexit_p(bcma_host_pci_remove), + .driver.pm = BCMA_PM_OPS, + }; + --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -13,6 +13,12 @@ @@ -993,7 +1095,104 @@ if (err) { --- a/drivers/bcma/scan.c +++ b/drivers/bcma/scan.c -@@ -212,6 +212,17 @@ static struct bcma_device *bcma_find_cor +@@ -19,7 +19,14 @@ struct bcma_device_id_name { + u16 id; + const char *name; + }; +-struct bcma_device_id_name bcma_device_names[] = { ++ ++static const struct bcma_device_id_name bcma_arm_device_names[] = { ++ { BCMA_CORE_ARM_1176, "ARM 1176" }, ++ { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, ++ { BCMA_CORE_ARM_CM3, "ARM CM3" }, ++}; ++ ++static const struct bcma_device_id_name bcma_bcm_device_names[] = { + { BCMA_CORE_OOB_ROUTER, "OOB Router" }, + { BCMA_CORE_INVALID, "Invalid" }, + { BCMA_CORE_CHIPCOMMON, "ChipCommon" }, +@@ -27,7 +34,6 @@ struct bcma_device_id_name bcma_device_n + { BCMA_CORE_SRAM, "SRAM" }, + { BCMA_CORE_SDRAM, "SDRAM" }, + { BCMA_CORE_PCI, "PCI" }, +- { BCMA_CORE_MIPS, "MIPS" }, + { BCMA_CORE_ETHERNET, "Fast Ethernet" }, + { BCMA_CORE_V90, "V90" }, + { BCMA_CORE_USB11_HOSTDEV, "USB 1.1 Hostdev" }, +@@ -44,7 +50,6 @@ struct bcma_device_id_name bcma_device_n + { BCMA_CORE_PHY_A, "PHY A" }, + { BCMA_CORE_PHY_B, "PHY B" }, + { BCMA_CORE_PHY_G, "PHY G" }, +- { BCMA_CORE_MIPS_3302, "MIPS 3302" }, + { BCMA_CORE_USB11_HOST, "USB 1.1 Host" }, + { BCMA_CORE_USB11_DEV, "USB 1.1 Device" }, + { BCMA_CORE_USB20_HOST, "USB 2.0 Host" }, +@@ -58,15 +63,11 @@ struct bcma_device_id_name bcma_device_n + { BCMA_CORE_PHY_N, "PHY N" }, + { BCMA_CORE_SRAM_CTL, "SRAM Controller" }, + { BCMA_CORE_MINI_MACPHY, "Mini MACPHY" }, +- { BCMA_CORE_ARM_1176, "ARM 1176" }, +- { BCMA_CORE_ARM_7TDMI, "ARM 7TDMI" }, + { BCMA_CORE_PHY_LP, "PHY LP" }, + { BCMA_CORE_PMU, "PMU" }, + { BCMA_CORE_PHY_SSN, "PHY SSN" }, + { BCMA_CORE_SDIO_DEV, "SDIO Device" }, +- { BCMA_CORE_ARM_CM3, "ARM CM3" }, + { BCMA_CORE_PHY_HT, "PHY HT" }, +- { BCMA_CORE_MIPS_74K, "MIPS 74K" }, + { BCMA_CORE_MAC_GBIT, "GBit MAC" }, + { BCMA_CORE_DDR12_MEM_CTL, "DDR1/DDR2 Memory Controller" }, + { BCMA_CORE_PCIE_RC, "PCIe Root Complex" }, +@@ -79,16 +80,41 @@ struct bcma_device_id_name bcma_device_n + { BCMA_CORE_SHIM, "SHIM" }, + { BCMA_CORE_DEFAULT, "Default" }, + }; +-const char *bcma_device_name(struct bcma_device_id *id) ++ ++static const struct bcma_device_id_name bcma_mips_device_names[] = { ++ { BCMA_CORE_MIPS, "MIPS" }, ++ { BCMA_CORE_MIPS_3302, "MIPS 3302" }, ++ { BCMA_CORE_MIPS_74K, "MIPS 74K" }, ++}; ++ ++static const char *bcma_device_name(const struct bcma_device_id *id) + { +- int i; ++ const struct bcma_device_id_name *names; ++ int size, i; + +- if (id->manuf == BCMA_MANUF_BCM) { +- for (i = 0; i < ARRAY_SIZE(bcma_device_names); i++) { +- if (bcma_device_names[i].id == id->id) +- return bcma_device_names[i].name; +- } ++ /* search manufacturer specific names */ ++ switch (id->manuf) { ++ case BCMA_MANUF_ARM: ++ names = bcma_arm_device_names; ++ size = ARRAY_SIZE(bcma_arm_device_names); ++ break; ++ case BCMA_MANUF_BCM: ++ names = bcma_bcm_device_names; ++ size = ARRAY_SIZE(bcma_bcm_device_names); ++ break; ++ case BCMA_MANUF_MIPS: ++ names = bcma_mips_device_names; ++ size = ARRAY_SIZE(bcma_mips_device_names); ++ break; ++ default: ++ return "UNKNOWN"; ++ } ++ ++ for (i = 0; i < size; i++) { ++ if (names[i].id == id->id) ++ return names[i].name; + } ++ + return "UNKNOWN"; + } + +@@ -212,6 +238,17 @@ static struct bcma_device *bcma_find_cor return NULL; } @@ -1011,7 +1210,7 @@ static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr, struct bcma_device_id *match, int core_num, struct bcma_device *core) -@@ -353,6 +364,7 @@ static int bcma_get_next_core(struct bcm +@@ -353,6 +390,7 @@ static int bcma_get_next_core(struct bcm void bcma_init_bus(struct bcma_bus *bus) { s32 tmp; @@ -1019,7 +1218,7 @@ if (bus->init_done) return; -@@ -363,9 +375,12 @@ void bcma_init_bus(struct bcma_bus *bus) +@@ -363,9 +401,12 @@ void bcma_init_bus(struct bcma_bus *bus) bcma_scan_switch_core(bus, BCMA_ADDR_BASE); tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); @@ -1035,7 +1234,7 @@ bus->init_done = true; } -@@ -392,6 +407,7 @@ int bcma_bus_scan(struct bcma_bus *bus) +@@ -392,6 +433,7 @@ int bcma_bus_scan(struct bcma_bus *bus) bcma_scan_switch_core(bus, erombase); while (eromptr < eromend) { @@ -1043,7 +1242,7 @@ struct bcma_device *core = kzalloc(sizeof(*core), GFP_KERNEL); if (!core) return -ENOMEM; -@@ -414,6 +430,8 @@ int bcma_bus_scan(struct bcma_bus *bus) +@@ -414,6 +456,8 @@ int bcma_bus_scan(struct bcma_bus *bus) core->core_index = core_num++; bus->nr_cores++; @@ -1122,7 +1321,7 @@ /************************************************** * R/W ops. -@@ -124,10 +176,21 @@ static int bcma_sprom_valid(const u16 *s +@@ -124,10 +176,37 @@ static int bcma_sprom_valid(const u16 *s * SPROM extraction. **************************************************/ @@ -1131,6 +1330,22 @@ +#define SPEX(_field, _offset, _mask, _shift) \ + bus->sprom._field = ((sprom[SPOFF(_offset)] & (_mask)) >> (_shift)) + ++#define SPEX32(_field, _offset, _mask, _shift) \ ++ bus->sprom._field = ((((u32)sprom[SPOFF((_offset)+2)] << 16 | \ ++ sprom[SPOFF(_offset)]) & (_mask)) >> (_shift)) ++ ++#define SPEX_ARRAY8(_field, _offset, _mask, _shift) \ ++ do { \ ++ SPEX(_field[0], _offset + 0, _mask, _shift); \ ++ SPEX(_field[1], _offset + 2, _mask, _shift); \ ++ SPEX(_field[2], _offset + 4, _mask, _shift); \ ++ SPEX(_field[3], _offset + 6, _mask, _shift); \ ++ SPEX(_field[4], _offset + 8, _mask, _shift); \ ++ SPEX(_field[5], _offset + 10, _mask, _shift); \ ++ SPEX(_field[6], _offset + 12, _mask, _shift); \ ++ SPEX(_field[7], _offset + 14, _mask, _shift); \ ++ } while (0) ++ static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom) { - u16 v; @@ -1145,7 +1360,7 @@ bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV; -@@ -137,85 +200,229 @@ static void bcma_sprom_extract_r8(struct +@@ -137,85 +216,363 @@ static void bcma_sprom_extract_r8(struct *(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v); } @@ -1257,7 +1472,8 @@ + SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, ~0, 0); + SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, ~0, 0); + -+ SPEX(country_code, SSB_SPROM8_CCODE, ~0, 0); ++ SPEX(alpha2[0], SSB_SPROM8_CCODE, 0xff00, 8); ++ SPEX(alpha2[1], SSB_SPROM8_CCODE, 0x00ff, 0); + + /* Extract cores power info info */ + for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { @@ -1312,6 +1528,136 @@ + SSB_SROM8_FEM_TR_ISO_SHIFT); + SPEX(fem.ghz5.antswlut, SSB_SPROM8_FEM5G, SSB_SROM8_FEM_ANTSWLUT, + SSB_SROM8_FEM_ANTSWLUT_SHIFT); ++ ++ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, ++ SSB_SPROM8_ANTAVAIL_A_SHIFT); ++ SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, ++ SSB_SPROM8_ANTAVAIL_BG_SHIFT); ++ SPEX(maxpwr_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_MAXP_BG_MASK, 0); ++ SPEX(itssi_bg, SSB_SPROM8_MAXP_BG, SSB_SPROM8_ITSSI_BG, ++ SSB_SPROM8_ITSSI_BG_SHIFT); ++ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); ++ SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, ++ SSB_SPROM8_ITSSI_A_SHIFT); ++ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); ++ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, ++ SSB_SPROM8_MAXP_AL_SHIFT); ++ SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); ++ SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, ++ SSB_SPROM8_GPIOA_P1_SHIFT); ++ SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); ++ SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, ++ SSB_SPROM8_GPIOB_P3_SHIFT); ++ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); ++ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, ++ SSB_SPROM8_TRI5G_SHIFT); ++ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); ++ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, ++ SSB_SPROM8_TRI5GH_SHIFT); ++ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, ++ SSB_SPROM8_RXPO2G_SHIFT); ++ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, ++ SSB_SPROM8_RXPO5G_SHIFT); ++ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); ++ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, ++ SSB_SPROM8_RSSISMC2G_SHIFT); ++ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, ++ SSB_SPROM8_RSSISAV2G_SHIFT); ++ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, ++ SSB_SPROM8_BXA2G_SHIFT); ++ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); ++ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, ++ SSB_SPROM8_RSSISMC5G_SHIFT); ++ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, ++ SSB_SPROM8_RSSISAV5G_SHIFT); ++ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, ++ SSB_SPROM8_BXA5G_SHIFT); ++ ++ SPEX(pa0b0, SSB_SPROM8_PA0B0, ~0, 0); ++ SPEX(pa0b1, SSB_SPROM8_PA0B1, ~0, 0); ++ SPEX(pa0b2, SSB_SPROM8_PA0B2, ~0, 0); ++ SPEX(pa1b0, SSB_SPROM8_PA1B0, ~0, 0); ++ SPEX(pa1b1, SSB_SPROM8_PA1B1, ~0, 0); ++ SPEX(pa1b2, SSB_SPROM8_PA1B2, ~0, 0); ++ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, ~0, 0); ++ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, ~0, 0); ++ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, ~0, 0); ++ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, ~0, 0); ++ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, ~0, 0); ++ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, ~0, 0); ++ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, ~0, 0); ++ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, ~0, 0); ++ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, ~0, 0); ++ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, ~0, 0); ++ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, ~0, 0); ++ ++ /* Extract the antenna gain values. */ ++ SPEX(antenna_gain.a0, SSB_SPROM8_AGAIN01, ++ SSB_SPROM8_AGAIN0, SSB_SPROM8_AGAIN0_SHIFT); ++ SPEX(antenna_gain.a1, SSB_SPROM8_AGAIN01, ++ SSB_SPROM8_AGAIN1, SSB_SPROM8_AGAIN1_SHIFT); ++ SPEX(antenna_gain.a2, SSB_SPROM8_AGAIN23, ++ SSB_SPROM8_AGAIN2, SSB_SPROM8_AGAIN2_SHIFT); ++ SPEX(antenna_gain.a3, SSB_SPROM8_AGAIN23, ++ SSB_SPROM8_AGAIN3, SSB_SPROM8_AGAIN3_SHIFT); ++ ++ SPEX(leddc_on_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_ON, ++ SSB_SPROM8_LEDDC_ON_SHIFT); ++ SPEX(leddc_off_time, SSB_SPROM8_LEDDC, SSB_SPROM8_LEDDC_OFF, ++ SSB_SPROM8_LEDDC_OFF_SHIFT); ++ ++ SPEX(txchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_TXCHAIN, ++ SSB_SPROM8_TXRXC_TXCHAIN_SHIFT); ++ SPEX(rxchain, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_RXCHAIN, ++ SSB_SPROM8_TXRXC_RXCHAIN_SHIFT); ++ SPEX(antswitch, SSB_SPROM8_TXRXC, SSB_SPROM8_TXRXC_SWITCH, ++ SSB_SPROM8_TXRXC_SWITCH_SHIFT); ++ ++ SPEX(opo, SSB_SPROM8_OFDM2GPO, 0x00ff, 0); ++ ++ SPEX_ARRAY8(mcs2gpo, SSB_SPROM8_2G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5gpo, SSB_SPROM8_5G_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5glpo, SSB_SPROM8_5GL_MCSPO, ~0, 0); ++ SPEX_ARRAY8(mcs5ghpo, SSB_SPROM8_5GH_MCSPO, ~0, 0); ++ ++ SPEX(rawtempsense, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_RAWTEMP, ++ SSB_SPROM8_RAWTS_RAWTEMP_SHIFT); ++ SPEX(measpower, SSB_SPROM8_RAWTS, SSB_SPROM8_RAWTS_MEASPOWER, ++ SSB_SPROM8_RAWTS_MEASPOWER_SHIFT); ++ SPEX(tempsense_slope, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE, ++ SSB_SPROM8_OPT_CORRX_TEMP_SLOPE_SHIFT); ++ SPEX(tempcorrx, SSB_SPROM8_OPT_CORRX, SSB_SPROM8_OPT_CORRX_TEMPCORRX, ++ SSB_SPROM8_OPT_CORRX_TEMPCORRX_SHIFT); ++ SPEX(tempsense_option, SSB_SPROM8_OPT_CORRX, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION, ++ SSB_SPROM8_OPT_CORRX_TEMP_OPTION_SHIFT); ++ SPEX(freqoffset_corr, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR, ++ SSB_SPROM8_HWIQ_IQSWP_FREQ_CORR_SHIFT); ++ SPEX(iqcal_swp_dis, SSB_SPROM8_HWIQ_IQSWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP, ++ SSB_SPROM8_HWIQ_IQSWP_IQCAL_SWP_SHIFT); ++ SPEX(hw_iqcal_en, SSB_SPROM8_HWIQ_IQSWP, SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL, ++ SSB_SPROM8_HWIQ_IQSWP_HW_IQCAL_SHIFT); ++ ++ SPEX(bw40po, SSB_SPROM8_BW40PO, ~0, 0); ++ SPEX(cddpo, SSB_SPROM8_CDDPO, ~0, 0); ++ SPEX(stbcpo, SSB_SPROM8_STBCPO, ~0, 0); ++ SPEX(bwduppo, SSB_SPROM8_BWDUPPO, ~0, 0); ++ ++ SPEX(tempthresh, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_TRESH, ++ SSB_SPROM8_THERMAL_TRESH_SHIFT); ++ SPEX(tempoffset, SSB_SPROM8_THERMAL, SSB_SPROM8_THERMAL_OFFSET, ++ SSB_SPROM8_THERMAL_OFFSET_SHIFT); ++ SPEX(phycal_tempdelta, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_PHYCAL, ++ SSB_SPROM8_TEMPDELTA_PHYCAL_SHIFT); ++ SPEX(temps_period, SSB_SPROM8_TEMPDELTA, SSB_SPROM8_TEMPDELTA_PERIOD, ++ SSB_SPROM8_TEMPDELTA_PERIOD_SHIFT); ++ SPEX(temps_hysteresis, SSB_SPROM8_TEMPDELTA, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS, ++ SSB_SPROM8_TEMPDELTA_HYSTERESIS_SHIFT); +} + +/* @@ -1421,16 +1767,19 @@ - if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM)) - return -ENOENT; + if (!bcma_sprom_ext_available(bus)) { ++ bool sprom_onchip; ++ + /* + * External SPROM takes precedence so check + * on-chip OTP only when no external SPROM + * is present. + */ -+ if (bcma_sprom_onchip_available(bus)) { ++ sprom_onchip = bcma_sprom_onchip_available(bus); ++ if (sprom_onchip) { + /* determine offset */ + offset = bcma_sprom_onchip_offset(bus); + } -+ if (!offset) { ++ if (!offset || !sprom_onchip) { + /* + * Maybe there is no SPROM on the device? + * Now we ask the arch code if there is some sprom @@ -1443,7 +1792,7 @@ sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); -@@ -225,11 +432,7 @@ int bcma_sprom_get(struct bcma_bus *bus) +@@ -225,11 +582,7 @@ int bcma_sprom_get(struct bcma_bus *bus) if (bus->chipinfo.id == 0x4331) bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false); @@ -1458,7 +1807,19 @@ if (bus->chipinfo.id == 0x4331) --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h -@@ -136,6 +136,7 @@ struct bcma_device { +@@ -26,6 +26,11 @@ struct bcma_chipinfo { + u8 pkg; + }; + ++struct bcma_boardinfo { ++ u16 vendor; ++ u16 type; ++}; ++ + enum bcma_clkmode { + BCMA_CLKMODE_FAST, + BCMA_CLKMODE_DYNAMIC, +@@ -136,6 +141,7 @@ struct bcma_device { bool dev_registered; u8 core_index; @@ -1466,7 +1827,7 @@ u32 addr; u32 wrap; -@@ -175,6 +176,12 @@ int __bcma_driver_register(struct bcma_d +@@ -175,6 +181,12 @@ int __bcma_driver_register(struct bcma_d extern void bcma_driver_unregister(struct bcma_driver *drv); @@ -1479,7 +1840,13 @@ struct bcma_bus { /* The MMIO area. */ void __iomem *mmio; -@@ -195,6 +202,7 @@ struct bcma_bus { +@@ -191,10 +203,13 @@ struct bcma_bus { + + struct bcma_chipinfo chipinfo; + ++ struct bcma_boardinfo boardinfo; ++ + struct bcma_device *mapped_core; struct list_head cores; u8 nr_cores; u8 init_done:1; @@ -1487,7 +1854,7 @@ struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; -@@ -282,6 +290,7 @@ static inline void bcma_maskset16(struct +@@ -282,6 +297,7 @@ static inline void bcma_maskset16(struct bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); } @@ -1560,7 +1927,7 @@ #define BCMA_CC_PMU5_MAINPLL_CPU 1 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h -@@ -53,6 +53,35 @@ struct pci_dev; +@@ -53,11 +53,47 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 @@ -1596,7 +1963,19 @@ #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ -@@ -72,20 +101,114 @@ struct pci_dev; + #define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */ + #define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */ ++#define BCMA_CORE_PCI_SPROM_PI_OFFSET 0 /* first word */ ++#define BCMA_CORE_PCI_SPROM_PI_MASK 0xf000 /* bit 15:12 */ ++#define BCMA_CORE_PCI_SPROM_PI_SHIFT 12 /* bit 15:12 */ ++#define BCMA_CORE_PCI_SPROM_MISC_CONFIG 5 /* word 5 */ ++#define BCMA_CORE_PCI_SPROM_L23READY_EXIT_NOPERST 0x8000 /* bit 15 */ ++#define BCMA_CORE_PCI_SPROM_CLKREQ_OFFSET_REV5 20 /* word 20 for srom rev <= 5 */ ++#define BCMA_CORE_PCI_SPROM_CLKREQ_ENB 0x0800 /* bit 11 */ + + /* SBtoPCIx */ + #define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000 +@@ -72,20 +108,118 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ @@ -1632,6 +2011,7 @@ +#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ +#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ +#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ ++#define BCMA_CORE_PCI_ASPMTIMER_EXTEND 0x01000000 /* > rev7: enable extend ASPM timer */ +#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ @@ -1700,17 +2080,20 @@ }; /* Register access */ ++#define pcicore_read16(pc, offset) bcma_read16((pc)->core, offset) #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) ++#define pcicore_write16(pc, offset, val) bcma_write16((pc)->core, offset, val) #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) -extern void bcma_core_pci_init(struct bcma_drv_pci *pc); +extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable); - ++extern void bcma_core_pci_extend_L1timer(struct bcma_drv_pci *pc, bool extend); ++ +extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); +extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); -+ + #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h |