diff options
Diffstat (limited to 'target')
11 files changed, 394 insertions, 95 deletions
diff --git a/target/linux/lantiq/dts/amazonse.dtsi b/target/linux/lantiq/dts/amazonse.dtsi index bce618fed8..2b8ad08140 100644 --- a/target/linux/lantiq/dts/amazonse.dtsi +++ b/target/linux/lantiq/dts/amazonse.dtsi @@ -122,11 +122,12 @@ }; ifxhcd@E101000 { - compatible = "lantiq,ifxhcd-ase"; + compatible = "lantiq,ase-usb", "lantiq,ifxhcd-ase"; reg = <0xE101000 0x1000 0xE120000 0x3f000>; interrupt-parent = <&icu0>; interrupts = <39>; + dr_mode = "host"; status = "disabled"; }; diff --git a/target/linux/lantiq/dts/ar9.dtsi b/target/linux/lantiq/dts/ar9.dtsi index 569f25f02c..2638a4b268 100644 --- a/target/linux/lantiq/dts/ar9.dtsi +++ b/target/linux/lantiq/dts/ar9.dtsi @@ -137,20 +137,22 @@ }; ifxhcd@E101000 { - compatible = "lantiq,ifxhcd-arx100", "lantiq,ifxhcd-arx100-dwc2"; + compatible = "lantiq,arx100-usb", "lantiq,ifxhcd-arx100"; reg = <0xE101000 0x1000 0xE120000 0x3f000>; interrupt-parent = <&icu0>; interrupts = <62 91>; + dr_mode = "host"; status = "disabled"; }; ifxhcd@E106000 { - compatible = "lantiq,ifxhcd-arx100-dwc2"; + compatible = "lantiq,arx100-usb"; reg = <0xE106000 0x1000 0xE1E0000 0x3f000>; interrupt-parent = <&icu0>; interrupts = <91>; + dr_mode = "host"; status = "disabled"; }; diff --git a/target/linux/lantiq/dts/danube.dtsi b/target/linux/lantiq/dts/danube.dtsi index f11787f975..83e85c36a5 100644 --- a/target/linux/lantiq/dts/danube.dtsi +++ b/target/linux/lantiq/dts/danube.dtsi @@ -143,7 +143,7 @@ }; ifxhcd@E101000 { - compatible = "lantiq,ifxhcd-danube-dwc2", "lantiq,ifxhcd-danube"; + compatible = "lantiq,danube-usb", "lantiq,ifxhcd-danube"; reg = <0xE101000 0x1000 0xE120000 0x3f000>; interrupt-parent = <&icu0>; diff --git a/target/linux/lantiq/dts/vr9.dtsi b/target/linux/lantiq/dts/vr9.dtsi index 4810a91c5c..eff4944411 100644 --- a/target/linux/lantiq/dts/vr9.dtsi +++ b/target/linux/lantiq/dts/vr9.dtsi @@ -177,19 +177,21 @@ ifxhcd@E101000 { status = "disabled"; - compatible = "lantiq,ifxhcd-xrx200", "lantiq,ifxhcd-xrx200-dwc2"; + compatible = "lantiq,xrx200-usb", "lantiq,ifxhcd-xrx200"; reg = <0xE101000 0x1000 0xE120000 0x3f000>; interrupt-parent = <&icu0>; interrupts = <62 91>; + dr_mode = "host"; }; ifxhcd@E106000 { status = "disabled"; - compatible = "lantiq,ifxhcd-xrx200-dwc2"; + compatible = "lantiq,xrx200-usb"; reg = <0xE106000 0x1000>; interrupt-parent = <&icu0>; interrupts = <91>; + dr_mode = "host"; }; eth0: eth@E108000 { diff --git a/target/linux/lantiq/patches-4.4/0039-MIPS-lantiq-danube-initialize-usb-on-boot.patch b/target/linux/lantiq/patches-4.4/0039-MIPS-lantiq-danube-initialize-usb-on-boot.patch deleted file mode 100644 index bd42f38c0a..0000000000 --- a/target/linux/lantiq/patches-4.4/0039-MIPS-lantiq-danube-initialize-usb-on-boot.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/lantiq/xway/reset.c -+++ b/arch/mips/lantiq/xway/reset.c -@@ -370,6 +370,7 @@ static int __init mips_reboot_setup(void - panic("Failed to remap core memory"); - - if (of_machine_is_compatible("lantiq,ar9") || -+ of_machine_is_compatible("lantiq,danube") || - of_machine_is_compatible("lantiq,vr9")) - ltq_usb_init(); - diff --git a/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch b/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch deleted file mode 100644 index 68d5f3ff4d..0000000000 --- a/target/linux/lantiq/patches-4.4/0041-USB-DWC2-add-ltq-params.patch +++ /dev/null @@ -1,75 +0,0 @@ ---- a/drivers/usb/dwc2/platform.c -+++ b/drivers/usb/dwc2/platform.c -@@ -145,6 +145,62 @@ static int __dwc2_lowlevel_hw_enable(str - return ret; - } - -+static const struct dwc2_core_params params_ltq = { -+ .otg_cap = 2, /* non-HNP/non-SRP */ -+ .otg_ver = -1, -+ .dma_enable = -1, -+ .dma_desc_enable = -1, -+ .speed = -1, -+ .enable_dynamic_fifo = -1, -+ .en_multiple_tx_fifo = -1, -+ .host_rx_fifo_size = 288, /* 288 DWORDs */ -+ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ -+ .host_perio_tx_fifo_size = 96, /* 96 DWORDs */ -+ .max_transfer_size = -1, -+ .max_packet_count = 511, -+ .host_channels = -1, -+ .phy_type = -1, -+ .phy_utmi_width = -1, -+ .phy_ulpi_ddr = -1, -+ .phy_ulpi_ext_vbus = -1, -+ .i2c_enable = -1, -+ .ulpi_fs_ls = -1, -+ .host_support_fs_ls_low_power = -1, -+ .host_ls_low_power_phy_clk = -1, -+ .ts_dline = -1, -+ .reload_ctl = -1, -+ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT, -+ .uframe_sched = -1, -+}; -+ -+static const struct dwc2_core_params params_danube = { -+ .otg_cap = 2, /* non-HNP/non-SRP */ -+ .otg_ver = -1, -+ .dma_enable = -1, -+ .dma_desc_enable = -1, -+ .speed = -1, -+ .enable_dynamic_fifo = -1, -+ .en_multiple_tx_fifo = -1, -+ .host_rx_fifo_size = -1, -+ .host_nperio_tx_fifo_size = -1, -+ .host_perio_tx_fifo_size = -1, -+ .max_transfer_size = -1, -+ .max_packet_count = -1, -+ .host_channels = -1, -+ .phy_type = -1, -+ .phy_utmi_width = -1, -+ .phy_ulpi_ddr = -1, -+ .phy_ulpi_ext_vbus = -1, -+ .i2c_enable = -1, -+ .ulpi_fs_ls = -1, -+ .host_support_fs_ls_low_power = -1, -+ .host_ls_low_power_phy_clk = -1, -+ .ts_dline = -1, -+ .reload_ctl = -1, -+ .ahbcfg = -1, -+ .uframe_sched = -1, -+}; -+ - /** - * dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources - * @hsotg: The driver state -@@ -310,6 +366,9 @@ static int dwc2_driver_remove(struct pla - static const struct of_device_id dwc2_of_match_table[] = { - { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, - { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, -+ { .compatible = "lantiq,ifxhcd-danube-dwc2", .data = ¶ms_danube }, -+ { .compatible = "lantiq,ifxhcd-arx100-dwc2", .data = ¶ms_ltq }, -+ { .compatible = "lantiq,ifxhcd-xrx200-dwc2", .data = ¶ms_ltq }, - { .compatible = "snps,dwc2", .data = NULL }, - { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, - {}, diff --git a/target/linux/lantiq/patches-4.4/0047-poweroff.patch b/target/linux/lantiq/patches-4.4/0047-poweroff.patch index 88aed2ce96..54249bba52 100644 --- a/target/linux/lantiq/patches-4.4/0047-poweroff.patch +++ b/target/linux/lantiq/patches-4.4/0047-poweroff.patch @@ -13,7 +13,7 @@ static void ltq_usb_init(void) { /* Power for USB cores 1 & 2 */ -@@ -380,7 +374,6 @@ static int __init mips_reboot_setup(void +@@ -379,7 +373,6 @@ static int __init mips_reboot_setup(void _machine_restart = ltq_machine_restart; _machine_halt = ltq_machine_halt; diff --git a/target/linux/lantiq/patches-4.4/0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch b/target/linux/lantiq/patches-4.4/0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch new file mode 100644 index 0000000000..91d6ac92e7 --- /dev/null +++ b/target/linux/lantiq/patches-4.4/0060-usb-dwc2-Add-support-for-Lantiq-ARX-and-XRX-SoCs.patch @@ -0,0 +1,78 @@ +From 6c0c0951bbf8c2c216675fe277fba4c42aa0a2bf Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Antti=20Sepp=C3=A4l=C3=A4?= <a.seppala@gmail.com> +Date: Sat, 27 Feb 2016 12:31:24 +0200 +Subject: [PATCH] usb: dwc2: Add support for Lantiq ARX and XRX SoCs +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add support for Lantiq ARX and XRX SoC families to the dwc2 driver. + +Acked-by: John Youn <johnyoun@synopsys.com> +Signed-off-by: Antti Seppälä <a.seppala@gmail.com> +Signed-off-by: Felipe Balbi <balbi@kernel.org> +--- + Documentation/devicetree/bindings/usb/dwc2.txt | 2 ++ + drivers/usb/dwc2/platform.c | 34 ++++++++++++++++++++++++++ + 2 files changed, 36 insertions(+) + +--- a/Documentation/devicetree/bindings/usb/dwc2.txt ++++ b/Documentation/devicetree/bindings/usb/dwc2.txt +@@ -7,6 +7,8 @@ Required properties: + - rockchip,rk3066-usb: The DWC2 USB controller instance in the rk3066 Soc; + - "rockchip,rk3188-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3188 Soc; + - "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc; ++ - "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs; ++ - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs; + - snps,dwc2: A generic DWC2 USB controller with default parameters. + - reg : Should contain 1 register range (address and length) + - interrupts : Should contain 1 interrupt +--- a/drivers/usb/dwc2/platform.c ++++ b/drivers/usb/dwc2/platform.c +@@ -116,6 +116,37 @@ static const struct dwc2_core_params par + .hibernation = -1, + }; + ++static const struct dwc2_core_params params_ltq = { ++ .otg_cap = 2, /* non-HNP/non-SRP */ ++ .otg_ver = -1, ++ .dma_enable = -1, ++ .dma_desc_enable = -1, ++ .speed = -1, ++ .enable_dynamic_fifo = -1, ++ .en_multiple_tx_fifo = -1, ++ .host_rx_fifo_size = 288, /* 288 DWORDs */ ++ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ ++ .host_perio_tx_fifo_size = 96, /* 96 DWORDs */ ++ .max_transfer_size = 65535, ++ .max_packet_count = 511, ++ .host_channels = -1, ++ .phy_type = -1, ++ .phy_utmi_width = -1, ++ .phy_ulpi_ddr = -1, ++ .phy_ulpi_ext_vbus = -1, ++ .i2c_enable = -1, ++ .ulpi_fs_ls = -1, ++ .host_support_fs_ls_low_power = -1, ++ .host_ls_low_power_phy_clk = -1, ++ .ts_dline = -1, ++ .reload_ctl = -1, ++ .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << ++ GAHBCFG_HBSTLEN_SHIFT, ++ .uframe_sched = -1, ++ .external_id_pin_ctl = -1, ++ .hibernation = -1, ++}; ++ + static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg) + { + struct platform_device *pdev = to_platform_device(hsotg->dev); +@@ -310,6 +341,8 @@ static int dwc2_driver_remove(struct pla + static const struct of_device_id dwc2_of_match_table[] = { + { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, + { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, ++ { .compatible = "lantiq,arx100-usb", .data = ¶ms_ltq }, ++ { .compatible = "lantiq,xrx200-usb", .data = ¶ms_ltq }, + { .compatible = "snps,dwc2", .data = NULL }, + { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, + {}, diff --git a/target/linux/lantiq/patches-4.4/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch b/target/linux/lantiq/patches-4.4/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch new file mode 100644 index 0000000000..1eda4cc4f1 --- /dev/null +++ b/target/linux/lantiq/patches-4.4/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch @@ -0,0 +1,99 @@ +From de2cad82c4d0872066f83ce59462603852b47f03 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Fri, 6 Jan 2017 17:55:24 +0100 +Subject: [PATCH 2/2] usb: dwc2: add support for other Lantiq SoCs + +The size of the internal RAM of the DesignWare USB controller changed +between the different Lantiq SoCs. We have the following sizes: + +Amazon + Danube: 8 KByte +Amazon SE + arx100: 2 KByte +xrx200 + xrx300: 2.5 KByte + +For Danube SoC we do not provide the params and let the driver decide +to use sane defaults, for the Amazon SE and arx100 we use small fifos +and for the xrx200 and xrx300 SCs a little bit bigger periodic fifo. +The auto detection of max_transfer_size and max_packet_count should +work, so remove it. + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + drivers/usb/dwc2/platform.c | 46 ++++++++++++++++++++++++++++++++++++++------- + 1 file changed, 39 insertions(+), 7 deletions(-) + +--- a/drivers/usb/dwc2/platform.c ++++ b/drivers/usb/dwc2/platform.c +@@ -116,7 +116,7 @@ static const struct dwc2_core_params par + .hibernation = -1, + }; + +-static const struct dwc2_core_params params_ltq = { ++static const struct dwc2_core_params params_ase = { + .otg_cap = 2, /* non-HNP/non-SRP */ + .otg_ver = -1, + .dma_enable = -1, +@@ -127,8 +127,8 @@ static const struct dwc2_core_params par + .host_rx_fifo_size = 288, /* 288 DWORDs */ + .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ + .host_perio_tx_fifo_size = 96, /* 96 DWORDs */ +- .max_transfer_size = 65535, +- .max_packet_count = 511, ++ .max_transfer_size = -1, ++ .max_packet_count = -1, + .host_channels = -1, + .phy_type = -1, + .phy_utmi_width = -1, +@@ -140,8 +140,37 @@ static const struct dwc2_core_params par + .host_ls_low_power_phy_clk = -1, + .ts_dline = -1, + .reload_ctl = -1, +- .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << +- GAHBCFG_HBSTLEN_SHIFT, ++ .ahbcfg = -1, ++ .uframe_sched = -1, ++ .external_id_pin_ctl = -1, ++ .hibernation = -1, ++}; ++ ++static const struct dwc2_core_params params_xrx200 = { ++ .otg_cap = 2, /* non-HNP/non-SRP */ ++ .otg_ver = -1, ++ .dma_enable = -1, ++ .dma_desc_enable = -1, ++ .speed = -1, ++ .enable_dynamic_fifo = -1, ++ .en_multiple_tx_fifo = -1, ++ .host_rx_fifo_size = 288, /* 288 DWORDs */ ++ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ ++ .host_perio_tx_fifo_size = 136, /* 136 DWORDs */ ++ .max_transfer_size = -1, ++ .max_packet_count = -1, ++ .host_channels = -1, ++ .phy_type = -1, ++ .phy_utmi_width = -1, ++ .phy_ulpi_ddr = -1, ++ .phy_ulpi_ext_vbus = -1, ++ .i2c_enable = -1, ++ .ulpi_fs_ls = -1, ++ .host_support_fs_ls_low_power = -1, ++ .host_ls_low_power_phy_clk = -1, ++ .ts_dline = -1, ++ .reload_ctl = -1, ++ .ahbcfg = -1, + .uframe_sched = -1, + .external_id_pin_ctl = -1, + .hibernation = -1, +@@ -341,8 +370,11 @@ static int dwc2_driver_remove(struct pla + static const struct of_device_id dwc2_of_match_table[] = { + { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, + { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, +- { .compatible = "lantiq,arx100-usb", .data = ¶ms_ltq }, +- { .compatible = "lantiq,xrx200-usb", .data = ¶ms_ltq }, ++ { .compatible = "lantiq,danube-usb", .data = NULL }, ++ { .compatible = "lantiq,ase-usb", .data = ¶ms_ase }, ++ { .compatible = "lantiq,arx100-usb", .data = ¶ms_ase }, ++ { .compatible = "lantiq,xrx200-usb", .data = ¶ms_xrx200 }, ++ { .compatible = "lantiq,xrx300-usb", .data = ¶ms_xrx200 }, + { .compatible = "snps,dwc2", .data = NULL }, + { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, + {}, diff --git a/target/linux/lantiq/patches-4.4/0065-MIPS-lantiq-improve-USB-initialization.patch b/target/linux/lantiq/patches-4.4/0065-MIPS-lantiq-improve-USB-initialization.patch new file mode 100644 index 0000000000..acc23080f1 --- /dev/null +++ b/target/linux/lantiq/patches-4.4/0065-MIPS-lantiq-improve-USB-initialization.patch @@ -0,0 +1,202 @@ +From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Fri, 6 Jan 2017 17:40:12 +0100 +Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization + +This adds code to initialize the USB controller and PHY also on Danube, +Amazon SE and AR10. This code is based on the Vendor driver from +different UGW versions and compared to the hardware documentation. + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + arch/mips/lantiq/xway/reset.c | 120 ++++++++++++++++++++++++++++++---------- + arch/mips/lantiq/xway/sysctrl.c | 20 +++++++ + 2 files changed, 110 insertions(+), 30 deletions(-) + +--- a/arch/mips/lantiq/xway/reset.c ++++ b/arch/mips/lantiq/xway/reset.c +@@ -72,6 +72,8 @@ + #define RCU_USBCFG_HDSEL_BIT BIT(11) + #define RCU_USBCFG_HOST_END_BIT BIT(10) + #define RCU_USBCFG_SLV_END_BIT BIT(9) ++#define RCU_USBCFG_SLV_END_BIT_AR9 BIT(17) ++ + + /* USB reset bits */ + #define RCU_USBRESET 0x0010 +@@ -85,6 +87,8 @@ + + #define RCU_CFG1A 0x0038 + #define RCU_CFG1B 0x003C ++#define RCU_CFG1_TX_PEE BIT(0) ++#define RCU_CFG1_DIS_THR_SHIFT 15 /* Disconnect Threshold */ + + /* USB PMU devices */ + #define PMU_AHBM BIT(15) +@@ -306,38 +310,91 @@ static void ltq_usb_init(void) + /* Power for USB cores 1 & 2 */ + ltq_pmu_enable(PMU_AHBM); + ltq_pmu_enable(PMU_USB0); +- ltq_pmu_enable(PMU_USB1); + +- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A); +- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B); ++ if (of_machine_is_compatible("lantiq,ar10") || ++ of_machine_is_compatible("lantiq,grx390") || ++ of_machine_is_compatible("lantiq,ar9") || ++ of_machine_is_compatible("lantiq,vr9")) ++ ltq_pmu_enable(PMU_USB1); ++ ++ if (of_machine_is_compatible("lantiq,vr9") || ++ of_machine_is_compatible("lantiq,ar10")) { ++ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | RCU_CFG1_TX_PEE | ++ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1A); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | RCU_CFG1_TX_PEE | ++ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1B); ++ } + + /* Enable USB PHY power for cores 1 & 2 */ + ltq_pmu_enable(PMU_USB0_P); +- ltq_pmu_enable(PMU_USB1_P); ++ if (of_machine_is_compatible("lantiq,ar10") || ++ of_machine_is_compatible("lantiq,grx390") || ++ of_machine_is_compatible("lantiq,ar9") || ++ of_machine_is_compatible("lantiq,vr9")) ++ ltq_pmu_enable(PMU_USB1_P); ++ ++ if (of_machine_is_compatible("lantiq,ase") || ++ of_machine_is_compatible("lantiq,danube")) { ++ /* Configure cores to host mode */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, ++ RCU_USB1CFG); ++ ++ /* Select DMA endianness (Host-endian: big-endian) */ ++ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) ++ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); ++ } ++ ++ if (of_machine_is_compatible("lantiq,ar9")) { ++ /* Configure cores to host mode */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, ++ RCU_USB1CFG); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, ++ RCU_USB2CFG); ++ ++ /* Select DMA endianness (Host-endian: big-endian) */ ++ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9) ++ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); ++ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9) ++ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); ++ } ++ ++ if (of_machine_is_compatible("lantiq,vr9") || ++ of_machine_is_compatible("lantiq,ar10")) { ++ /* Configure cores to host mode */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, ++ RCU_USB1CFG); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, ++ RCU_USB2CFG); ++ ++ /* Select DMA endianness (Host-endian: big-endian) */ ++ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) ++ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); ++ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT) ++ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); ++ } ++ ++ if (of_machine_is_compatible("lantiq,ar9")) { ++ /* Hard reset USB state machines */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) ++ | USBRESET_BIT | BIT(28), RCU_USBRESET); ++ udelay(50 * 1000); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) ++ & ~(USBRESET_BIT | BIT(28)), RCU_USBRESET); ++ } else { ++ /* Hard reset USB state machines */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET); ++ udelay(50 * 1000); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET); ++ } + +- /* Configure cores to host mode */ +- ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, +- RCU_USB1CFG); +- ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, +- RCU_USB2CFG); +- +- /* Select DMA endianness (Host-endian: big-endian) */ +- ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) +- | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); +- ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT) +- | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); +- +- /* Hard reset USB state machines */ +- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET); +- udelay(50 * 1000); +- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET); +- +- /* Soft reset USB state machines */ +- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) +- | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2); +- udelay(50 * 1000); +- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) +- & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2); ++ if (of_machine_is_compatible("lantiq,vr9")) { ++ /* Soft reset USB state machines */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) ++ | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2); ++ udelay(50 * 1000); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) ++ & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2); ++ } + } + + static int __init mips_reboot_setup(void) +@@ -363,8 +420,11 @@ static int __init mips_reboot_setup(void + if (!ltq_rcu_membase) + panic("Failed to remap core memory"); + +- if (of_machine_is_compatible("lantiq,ar9") || +- of_machine_is_compatible("lantiq,vr9")) ++ if (of_machine_is_compatible("lantiq,danube") || ++ of_machine_is_compatible("lantiq,ase") || ++ of_machine_is_compatible("lantiq,ar9") || ++ of_machine_is_compatible("lantiq,vr9") || ++ of_machine_is_compatible("lantiq,ar10")) + ltq_usb_init(); + + if (of_machine_is_compatible("lantiq,vr9")) +--- a/arch/mips/lantiq/xway/sysctrl.c ++++ b/arch/mips/lantiq/xway/sysctrl.c +@@ -254,6 +254,25 @@ static void pmu_disable(struct clk *clk) + pr_warn("deactivating PMU module failed!"); + } + ++static void usb_set_clock(void) ++{ ++ unsigned int val = ltq_cgu_r32(ifccr); ++ ++ if (of_machine_is_compatible("lantiq,ar10") || ++ of_machine_is_compatible("lantiq,grx390")) { ++ val &= ~0x03; /* XTAL divided by 3 */ ++ } else if (of_machine_is_compatible("lantiq,ar9") || ++ of_machine_is_compatible("lantiq,vr9")) { ++ /* TODO: this depends on the XTAL frequency */ ++ val |= 0x03; /* XTAL divided by 3 */ ++ } else if (of_machine_is_compatible("lantiq,ase")) { ++ val |= 0x20; /* from XTAL */ ++ } else if (of_machine_is_compatible("lantiq,danube")) { ++ val |= 0x30; /* 12 MHz, generated from 36 MHz */ ++ } ++ ltq_cgu_w32(val, ifccr); ++} ++ + /* the pci enable helper */ + static int pci_enable(struct clk *clk) + { +@@ -608,4 +627,5 @@ void __init ltq_soc_init(void) + + if (of_machine_is_compatible("lantiq,vr9")) + xbar_fpi_burst_disable(); ++ usb_set_clock(); + } diff --git a/target/linux/lantiq/patches-4.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch b/target/linux/lantiq/patches-4.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch index 227d1cf25a..e42aaf9c07 100644 --- a/target/linux/lantiq/patches-4.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch +++ b/target/linux/lantiq/patches-4.4/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch @@ -1,6 +1,6 @@ --- a/arch/mips/lantiq/xway/sysctrl.c +++ b/arch/mips/lantiq/xway/sysctrl.c -@@ -423,6 +423,20 @@ static void clkdev_add_clkout(void) +@@ -442,6 +442,20 @@ static void clkdev_add_clkout(void) } } @@ -21,10 +21,10 @@ /* bring up all register ranges that we need for basic system control */ void __init ltq_soc_init(void) { -@@ -608,4 +622,6 @@ void __init ltq_soc_init(void) - +@@ -628,4 +642,6 @@ void __init ltq_soc_init(void) if (of_machine_is_compatible("lantiq,vr9")) xbar_fpi_burst_disable(); + usb_set_clock(); + + set_phy_clock_source(np_cgu); } |