diff options
Diffstat (limited to 'target')
20 files changed, 1827 insertions, 1702 deletions
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts index 3368d45255..07f0acd6a1 100644 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts @@ -11,202 +11,11 @@ /dts-v1/; #include "imx6dl.dtsi" +#include "imx6qdl-gw51xx.dtsi" / { model = "Gateworks Ventana i.MX6 DualLite GW51XX"; compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl"; - - /* these are used by bootloader for disabling nodes */ - aliases { - can0 = &can1; - ethernet0 = &fec; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - led0 = &led0; - led1 = &led1; - nand = &gpmi; - usb0 = &usbh1; - usb1 = &usbotg; - }; - - memory { - reg = <0x10000000 0x20000000>; - }; - - leds { - compatible = "gpio-leds"; - - led0: user1 { - label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led1: user2 { - label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ - default-state = "off"; - }; - }; - - regulators { - compatible = "simple-bus"; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_5p0v: 5p0v { - compatible = "regulator-fixed"; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_usb_otg_vbus: usb_otg_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - }; - }; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; - status = "okay"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand_2>; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - - eeprom1: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - eeprom2: eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - pagesize = <16>; - }; - - eeprom3: eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - pagesize = <16>; - }; - - eeprom4: eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - }; - - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - - rtc: ds1672@68 { - compatible = "dallas,ds1672"; - reg = <0x68>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_2>; - status = "okay"; - - pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3_2>; - status = "okay"; - - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; }; &iomuxc { @@ -227,44 +36,3 @@ }; }; }; - -&pcie { - reset-gpio = <&gpio1 0 0>; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_2>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_1>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3_1>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5_1>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw52xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw52xx.dts index eef42ed38e..cafbc069d7 100644 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw52xx.dts +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw52xx.dts @@ -11,287 +11,11 @@ /dts-v1/; #include "imx6dl.dtsi" +#include "imx6qdl-gw52xx.dtsi" / { model = "Gateworks Ventana i.MX6 DualLite GW52XX"; compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl"; - - /* these are used by bootloader for disabling nodes */ - aliases { - can0 = &can1; - ethernet0 = &fec; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - led0 = &led0; - led1 = &led1; - led2 = &led2; - nand = &gpmi; - ssi0 = &ssi1; - usb0 = &usbh1; - usb1 = &usbotg; - usdhc2 = &usdhc3; - }; - - memory { - reg = <0x10000000 0x20000000>; - }; - - leds { - compatible = "gpio-leds"; - - led0: user1 { - label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led1: user2 { - label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ - default-state = "off"; - }; - - led2: user3 { - label = "user3"; - gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */ - default-state = "off"; - }; - }; - - regulators { - compatible = "simple-bus"; - - reg_1p0v: 1p0v { - compatible = "regulator-fixed"; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - /* remove this fixed regulator once ltc3676__sw2 driver available */ - reg_1p8v: 1p8v { - compatible = "regulator-fixed"; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_5p0v: 5p0v { - compatible = "regulator-fixed"; - regulator-name = "5P0V"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_usb_otg_vbus: usb_otg_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - }; - }; - - sound { - compatible = "fsl,imx6q-sabrelite-sgtl5000", - "fsl,imx-audio-sgtl5000"; - model = "imx6q-sabrelite-sgtl5000"; - ssi-controller = <&ssi1>; - audio-codec = <&codec>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <4>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1_1>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; - status = "okay"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand_2>; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - - eeprom1: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - eeprom2: eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - pagesize = <16>; - }; - - eeprom3: eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - pagesize = <16>; - }; - - eeprom4: eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - }; - - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - - rtc: ds1672@68 { - compatible = "dallas,ds1672"; - reg = <0x68>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_2>; - status = "okay"; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3_reg: ltc3676__ldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3_2>; - status = "okay"; - - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x13>; - }; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clks 169>; - VDDA-supply = <®_1p8v>; - VDDIO-supply = <®_3p3v>; - }; - - touchscreen: egalax_ts@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; - }; - - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; }; &iomuxc { @@ -322,58 +46,3 @@ }; }; }; - -&ldb { - status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; -}; - -&ssi1 { - fsl,mode = "i2s-slave"; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_2>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_1>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5_1>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_2>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw53xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw53xx.dts index 99d3d4c459..fe2b0291e1 100644 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw53xx.dts +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw53xx.dts @@ -11,303 +11,11 @@ /dts-v1/; #include "imx6dl.dtsi" +#include "imx6qdl-gw53xx.dtsi" / { model = "Gateworks Ventana i.MX6 DualLite GW53XX"; compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl"; - - /* these are used by bootloader for disabling nodes */ - aliases { - can0 = &can1; - ethernet0 = &fec; - ethernet1 = ð1; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - led0 = &led0; - led1 = &led1; - led2 = &led2; - nand = &gpmi; - sky2 = ð1; - ssi0 = &ssi1; - usb0 = &usbh1; - usb1 = &usbotg; - usdhc2 = &usdhc3; - }; - - chosen { - bootargs = "console=ttymxc1,115200"; - }; - - memory { - reg = <0x10000000 0x40000000>; - }; - - leds { - compatible = "gpio-leds"; - - led0: user1 { - label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led1: user2 { - label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ - default-state = "off"; - }; - - led2: user3 { - label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ - default-state = "off"; - }; - }; - - regulators { - compatible = "simple-bus"; - - reg_1p0v: 1p0v { - compatible = "regulator-fixed"; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - /* remove this fixed regulator once ltc3676__sw2 driver available */ - reg_1p8v: 1p8v { - compatible = "regulator-fixed"; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usb_h1_vbus: usb_h1_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_usb_otg_vbus: usb_otg_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - }; - }; - - sound { - compatible = "fsl,imx6q-sabrelite-sgtl5000", - "fsl,imx-audio-sgtl5000"; - model = "imx6q-sabrelite-sgtl5000"; - ssi-controller = <&ssi1>; - audio-codec = <&codec>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <4>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1_1>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; - status = "okay"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand_2>; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - - eeprom1: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - eeprom2: eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - pagesize = <16>; - }; - - eeprom3: eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - pagesize = <16>; - }; - - eeprom4: eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - }; - - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - - rtc: ds1672@68 { - compatible = "dallas,ds1672"; - reg = <0x68>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_2>; - status = "okay"; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pmic: ltc3676@3c { - compatible = "ltc,ltc3676"; - reg = <0x3c>; - - regulators { - sw1_reg: ltc3676__sw1 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw2_reg: ltc3676__sw2 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3_reg: ltc3676__sw3 { - regulator-min-microvolt = <1175000>; - regulator-max-microvolt = <1175000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: ltc3676__sw4 { - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo2_reg: ltc3676__ldo2 { - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3_reg: ltc3676__ldo3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4_reg: ltc3676__ldo4 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - }; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3_2>; - status = "okay"; - - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x1e>; - }; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clks 169>; - VDDA-supply = <®_1p8v>; - VDDIO-supply = <®_3p3v>; - }; - - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - - touchscreen: egalax_ts@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; - }; - - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; - }; - - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; }; &iomuxc { @@ -337,65 +45,3 @@ }; }; }; - -&ldb { - status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>; - }; -}; - -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; -}; - -&ssi1 { - fsl,mode = "i2s-slave"; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_2>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_1>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5_1>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_2>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw54xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw54xx.dts new file mode 100644 index 0000000000..6a0ad02890 --- /dev/null +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw54xx.dts @@ -0,0 +1,43 @@ +/* + * Copyright 2013 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-gw54xx.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 DualLite GW54XX"; + compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ + MX6DL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */ + MX6DL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */ + MX6DL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */ + MX6DL_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ + MX6DL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */ + MX6DL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ + MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ + MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ + MX6DL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ + MX6DL_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */ + MX6DL_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */ + >; + }; + }; +}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw51xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw51xx.dts new file mode 100644 index 0000000000..4c2f8c4022 --- /dev/null +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw51xx.dts @@ -0,0 +1,38 @@ +/* + * Copyright 2013 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-gw51xx.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Quad GW51XX"; + compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6Q_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ + MX6Q_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ + MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ + MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ + MX6Q_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */ + MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ + MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ + >; + }; + }; +}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw52xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw52xx.dts new file mode 100644 index 0000000000..18bf17dd8c --- /dev/null +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw52xx.dts @@ -0,0 +1,52 @@ +/* + * Copyright 2013 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-gw52xx.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Quad GW52XX"; + compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6Q_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ + MX6Q_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ + MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ + MX6Q_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */ + MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ + MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */ + MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */ + MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ + MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ + MX6Q_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* USB_SEL_PCI */ + MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ + MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ + MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ + MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ + MX6Q_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */ + MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */ + MX6Q_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */ + >; + }; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw53xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw53xx.dts new file mode 100644 index 0000000000..4453cb5673 --- /dev/null +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw53xx.dts @@ -0,0 +1,51 @@ +/* + * Copyright 2013 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-gw53xx.dtsi" + +/ { + model = "Gateworks Ventana i.MX6 Quad GW53XX"; + compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6Q_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */ + MX6Q_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */ + MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */ + MX6Q_PAD_EIM_D31__GPIO3_IO31 0x80000000 /* VIDDEC_PDN# */ + MX6Q_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */ + MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE_RST# */ + MX6Q_PAD_ENET_RXD0__GPIO1_IO27 0x80000000 /* GPS_PWDN */ + MX6Q_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* GPS_PPS */ + MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */ + MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */ + MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */ + MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */ + MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */ + MX6Q_PAD_SD2_CMD__GPIO1_IO11 0x80000000 /* LVDS_TCH# */ + MX6Q_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3_CD# */ + MX6Q_PAD_SD4_DAT3__GPIO2_IO11 0x80000000 /* UART2_EN# */ + >; + }; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts index 825d952ba2..9677135840 100644 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -38,10 +38,6 @@ bootargs = "console=ttymxc1,115200"; }; - memory { - reg = <0x10000000 0x40000000>; - }; - leds { compatible = "gpio-leds"; @@ -65,6 +61,10 @@ }; }; + memory { + reg = <0x10000000 0x40000000>; + }; + regulators { compatible = "simple-bus"; @@ -406,13 +406,7 @@ &uart2 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3_1>; + pinctrl-0 = <&pinctrl_uart2_3>; status = "okay"; }; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts index 828fc81183..c85133930b 100644 --- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts @@ -11,344 +11,11 @@ /dts-v1/; #include "imx6q.dtsi" +#include "imx6qdl-gw54xx.dtsi" / { model = "Gateworks Ventana i.MX6 Quad GW54XX"; compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q"; - - /* these are used by bootloader for disabling nodes */ - aliases { - can0 = &can1; - ethernet0 = &fec; - ethernet1 = ð1; - i2c0 = &i2c1; - i2c1 = &i2c2; - i2c2 = &i2c3; - led0 = &led0; - led1 = &led1; - led2 = &led2; - nand = &gpmi; - sky2 = ð1; - ssi0 = &ssi1; - usb0 = &usbh1; - usb1 = &usbotg; - usdhc2 = &usdhc3; - }; - - chosen { - bootargs = "console=ttymxc1,115200"; - }; - - memory { - reg = <0x10000000 0x40000000>; - }; - - leds { - compatible = "gpio-leds"; - - led0: user1 { - label = "user1"; - gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ - default-state = "on"; - linux,default-trigger = "heartbeat"; - }; - - led1: user2 { - label = "user2"; - gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ - default-state = "off"; - }; - - led2: user3 { - label = "user3"; - gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ - default-state = "off"; - }; - }; - - regulators { - compatible = "simple-bus"; - - reg_1p0v: 1p0v { - compatible = "regulator-fixed"; - regulator-name = "1P0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - reg_3p3v: 3p3v { - compatible = "regulator-fixed"; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_usb_h1_vbus: usb_h1_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_h1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - - reg_usb_otg_vbus: usb_otg_vbus { - compatible = "regulator-fixed"; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - }; - }; - - sound { - compatible = "fsl,imx6q-sabrelite-sgtl5000", - "fsl,imx-audio-sgtl5000"; - model = "imx6q-sabrelite-sgtl5000"; - ssi-controller = <&ssi1>; - audio-codec = <&codec>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", - "Headphone Jack", "HP_OUT"; - mux-int-port = <1>; - mux-ext-port = <4>; - }; -}; - -&audmux { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_audmux_1>; - status = "okay"; -}; - -&can1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan1_1>; - status = "okay"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet_1>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio1 30 0>; - status = "okay"; -}; - -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand_2>; - status = "okay"; -}; - -&i2c1 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c1_1>; - status = "okay"; - - eeprom1: eeprom@50 { - compatible = "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - - eeprom2: eeprom@51 { - compatible = "atmel,24c02"; - reg = <0x51>; - pagesize = <16>; - }; - - eeprom3: eeprom@52 { - compatible = "atmel,24c02"; - reg = <0x52>; - pagesize = <16>; - }; - - eeprom4: eeprom@53 { - compatible = "atmel,24c02"; - reg = <0x53>; - pagesize = <16>; - }; - - gpio: pca9555@23 { - compatible = "nxp,pca9555"; - reg = <0x23>; - gpio-controller; - #gpio-cells = <2>; - }; - - hwmon: gsc@29 { - compatible = "gw,gsp"; - reg = <0x29>; - }; - - rtc: ds1672@68 { - compatible = "dallas,ds1672"; - reg = <0x68>; - }; -}; - -&i2c2 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2_2>; - status = "okay"; - - pmic: pfuze100@08 { - compatible = "fsl,pfuze100"; - reg = <0x08>; - - regulators { - sw1a_reg: sw1ab { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw1c_reg: sw1c { - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1875000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <6250>; - }; - - sw2_reg: sw2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3950000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3a_reg: sw3a { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw3b_reg: sw3b { - regulator-min-microvolt = <400000>; - regulator-max-microvolt = <1975000>; - regulator-boot-on; - regulator-always-on; - }; - - sw4_reg: sw4 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - }; - - swbst_reg: swbst { - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5150000>; - }; - - snvs_reg: vsnvs { - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - regulator-always-on; - }; - - vref_reg: vrefddr { - regulator-boot-on; - regulator-always-on; - }; - - vgen1_reg: vgen1 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen2_reg: vgen2 { - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1550000>; - }; - - vgen3_reg: vgen3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - }; - - vgen4_reg: vgen4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen5_reg: vgen5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - vgen6_reg: vgen6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - }; - - pciswitch: pex8609@3f { - compatible = "plx,pex8609"; - reg = <0x3f>; - }; - - pciclkgen: si52147@6b { - compatible = "sil,si52147"; - reg = <0x6b>; - }; -}; - -&i2c3 { - clock-frequency = <100000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3_2>; - status = "okay"; - - accelerometer: fxos8700@1e { - compatible = "fsl,fxos8700"; - reg = <0x1e>; - }; - - codec: sgtl5000@0a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&clks 169>; - VDDA-supply = <&sw4_reg>; - VDDIO-supply = <®_3p3v>; - }; - - hdmiin: adv7611@4c { - compatible = "adi,adv7611"; - reg = <0x4c>; - }; - - touchscreen: egalax_ts@04 { - compatible = "eeti,egalax_ts"; - reg = <0x04>; - interrupt-parent = <&gpio7>; - interrupts = <12 2>; /* gpio7_12 active low */ - wakeup-gpios = <&gpio7 12 0>; - }; - - videoout: adv7393@2a { - compatible = "adi,adv7393"; - reg = <0x2a>; - }; - - videoin: adv7180@20 { - compatible = "adi,adv7180"; - reg = <0x20>; - }; }; &iomuxc { @@ -375,74 +42,13 @@ }; }; -&ldb { +&ldb { status = "okay"; lvds-channel@0 { crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; }; }; -&pcie { - reset-gpio = <&gpio1 29 0>; - status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - /* Filled in by U-Boot */ - mac-address = [ 00 00 00 00 00 00 ]; - }; -}; - &sata { status = "okay"; }; - -&ssi1 { - fsl,mode = "i2s-slave"; - status = "okay"; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1_2>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2_2>; - status = "okay"; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart3_1>; - status = "okay"; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart5_1>; - status = "okay"; -}; - -&usbotg { - vbus-supply = <®_usb_otg_vbus>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_1>; - disable-over-current; - status = "okay"; -}; - -&usbh1 { - vbus-supply = <®_usb_h1_vbus>; - status = "okay"; -}; - -&usdhc3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc3_2>; - cd-gpios = <&gpio7 0 0>; - vmmc-supply = <®_3p3v>; - status = "okay"; -}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi new file mode 100644 index 0000000000..146a337b89 --- /dev/null +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -0,0 +1,245 @@ +/* + * Copyright 2013 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + can0 = &can1; + ethernet0 = &fec; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + led0 = &led0; + led1 = &led1; + nand = &gpmi; + usb0 = &usbh1; + usb1 = &usbotg; + }; + + leds { + compatible = "gpio-leds"; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + default-state = "off"; + }; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: 5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 30 0>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + status = "okay"; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + hwmon: gsc@29 { + compatible = "gw,gsp"; + reg = <0x29>; + }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_2>; + status = "okay"; + + pmic: ltc3676@3c { + compatible = "ltc,ltc3676"; + reg = <0x3c>; + + regulators { + sw1_reg: ltc3676__sw1 { + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1175000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: ltc3676__sw2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: ltc3676__sw3 { + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1175000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: ltc3676__sw4 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ltc3676__ldo2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ltc3676__ldo4 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_2>; + status = "okay"; + + videoin: adv7180@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + }; +}; + +&pcie { + reset-gpio = <&gpio1 0 0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_3>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi new file mode 100644 index 0000000000..5524782ad7 --- /dev/null +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -0,0 +1,344 @@ +/* + * Copyright 2013 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + can0 = &can1; + ethernet0 = &fec; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + led0 = &led0; + led1 = &led1; + led2 = &led2; + nand = &gpmi; + ssi0 = &ssi1; + usb0 = &usbh1; + usb1 = &usbotg; + usdhc2 = &usdhc3; + }; + + leds { + compatible = "gpio-leds"; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + default-state = "off"; + }; + + led2: user3 { + label = "user3"; + gpios = <&gpio4 15 1>; /* 111 - MX6_LOCLED# */ + default-state = "off"; + }; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + + reg_1p0v: 1p0v { + compatible = "regulator-fixed"; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + /* remove this fixed regulator once ltc3676__sw2 driver available */ + reg_1p8v: 1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_5p0v: 5p0v { + compatible = "regulator-fixed"; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + }; + + sound { + compatible = "fsl,imx6q-sabrelite-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-sabrelite-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_1>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 30 0>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + status = "okay"; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + hwmon: gsc@29 { + compatible = "gw,gsp"; + reg = <0x29>; + }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_2>; + status = "okay"; + + pciswitch: pex8609@3f { + compatible = "plx,pex8609"; + reg = <0x3f>; + }; + + pmic: ltc3676@3c { + compatible = "ltc,ltc3676"; + reg = <0x3c>; + + regulators { + sw1_reg: ltc3676__sw1 { + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1175000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: ltc3676__sw2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: ltc3676__sw3 { + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1175000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: ltc3676__sw4 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ltc3676__ldo2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ltc3676__ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ltc3676__ldo4 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_2>; + status = "okay"; + + accelerometer: fxos8700@1e { + compatible = "fsl,fxos8700"; + reg = <0x13>; + }; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 169>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_3p3v>; + }; + + touchscreen: egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio7>; + interrupts = <12 2>; /* gpio7_12 active low */ + wakeup-gpios = <&gpio7 12 0>; + }; + + videoin: adv7180@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + }; +}; + +&ldb { + status = "okay"; + lvds-channel@0 { + crtcs = <&ipu1 0>, <&ipu1 1>; + }; +}; + +&pcie { + reset-gpio = <&gpio1 29 0>; + status = "okay"; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + cd-gpios = <&gpio7 0 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi new file mode 100644 index 0000000000..40e6b4e56a --- /dev/null +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -0,0 +1,367 @@ +/* + * Copyright 2013 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + can0 = &can1; + ethernet0 = &fec; + ethernet1 = ð1; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + led0 = &led0; + led1 = &led1; + led2 = &led2; + nand = &gpmi; + sky2 = ð1; + ssi0 = &ssi1; + usb0 = &usbh1; + usb1 = &usbotg; + usdhc2 = &usdhc3; + }; + + chosen { + bootargs = "console=ttymxc1,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + default-state = "off"; + }; + + led2: user3 { + label = "user3"; + gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + default-state = "off"; + }; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + + reg_1p0v: 1p0v { + compatible = "regulator-fixed"; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + /* remove this fixed regulator once ltc3676__sw2 driver available */ + reg_1p8v: 1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_h1_vbus: usb_h1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + }; + + sound { + compatible = "fsl,imx6q-sabrelite-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-sabrelite-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_1>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 30 0>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + status = "okay"; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + hwmon: gsc@29 { + compatible = "gw,gsp"; + reg = <0x29>; + }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_2>; + status = "okay"; + + pciswitch: pex8609@3f { + compatible = "plx,pex8609"; + reg = <0x3f>; + }; + + pmic: ltc3676@3c { + compatible = "ltc,ltc3676"; + reg = <0x3c>; + + regulators { + sw1_reg: ltc3676__sw1 { + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1175000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: ltc3676__sw2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: ltc3676__sw3 { + regulator-min-microvolt = <1175000>; + regulator-max-microvolt = <1175000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: ltc3676__sw4 { + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ltc3676__ldo2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: ltc3676__ldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: ltc3676__ldo4 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_2>; + status = "okay"; + + accelerometer: fxos8700@1e { + compatible = "fsl,fxos8700"; + reg = <0x1e>; + }; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 169>; + VDDA-supply = <®_1p8v>; + VDDIO-supply = <®_3p3v>; + }; + + hdmiin: adv7611@4c { + compatible = "adi,adv7611"; + reg = <0x4c>; + }; + + touchscreen: egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio7>; + interrupts = <12 2>; /* gpio7_12 active low */ + wakeup-gpios = <&gpio7 12 0>; + }; + + videoout: adv7393@2a { + compatible = "adi,adv7393"; + reg = <0x2a>; + }; + + videoin: adv7180@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + }; +}; + +&ldb { + status = "okay"; + lvds-channel@0 { + crtcs = <&ipu1 0>, <&ipu1 1>; + }; +}; + +&pcie { + reset-gpio = <&gpio1 29 0>; + status = "okay"; + + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + cd-gpios = <&gpio7 0 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi new file mode 100644 index 0000000000..e27b27ae92 --- /dev/null +++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -0,0 +1,408 @@ +/* + * Copyright 2013 Gateworks Corporation + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + /* these are used by bootloader for disabling nodes */ + aliases { + can0 = &can1; + ethernet0 = &fec; + ethernet1 = ð1; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + led0 = &led0; + led1 = &led1; + led2 = &led2; + nand = &gpmi; + sky2 = ð1; + ssi0 = &ssi1; + usb0 = &usbh1; + usb1 = &usbotg; + usdhc2 = &usdhc3; + }; + + chosen { + bootargs = "console=ttymxc1,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led0: user1 { + label = "user1"; + gpios = <&gpio4 6 0>; /* 102 -> MX6_PANLEDG */ + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + + led1: user2 { + label = "user2"; + gpios = <&gpio4 7 0>; /* 103 -> MX6_PANLEDR */ + default-state = "off"; + }; + + led2: user3 { + label = "user3"; + gpios = <&gpio4 15 1>; /* 111 -> MX6_LOCLED# */ + default-state = "off"; + }; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + regulators { + compatible = "simple-bus"; + + reg_1p0v: 1p0v { + compatible = "regulator-fixed"; + regulator-name = "1P0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_h1_vbus: usb_h1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; + }; + + sound { + compatible = "fsl,imx6q-sabrelite-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-sabrelite-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <4>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_1>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 30 0>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; + status = "okay"; + + eeprom1: eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + eeprom2: eeprom@51 { + compatible = "atmel,24c02"; + reg = <0x51>; + pagesize = <16>; + }; + + eeprom3: eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + eeprom4: eeprom@53 { + compatible = "atmel,24c02"; + reg = <0x53>; + pagesize = <16>; + }; + + gpio: pca9555@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + hwmon: gsc@29 { + compatible = "gw,gsp"; + reg = <0x29>; + }; + + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_2>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3950000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + + pciswitch: pex8609@3f { + compatible = "plx,pex8609"; + reg = <0x3f>; + }; + + pciclkgen: si52147@6b { + compatible = "sil,si52147"; + reg = <0x6b>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_2>; + status = "okay"; + + accelerometer: fxos8700@1e { + compatible = "fsl,fxos8700"; + reg = <0x1e>; + }; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 169>; + VDDA-supply = <&sw4_reg>; + VDDIO-supply = <®_3p3v>; + }; + + hdmiin: adv7611@4c { + compatible = "adi,adv7611"; + reg = <0x4c>; + }; + + touchscreen: egalax_ts@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio7>; + interrupts = <12 2>; /* gpio7_12 active low */ + wakeup-gpios = <&gpio7 12 0>; + }; + + videoout: adv7393@2a { + compatible = "adi,adv7393"; + reg = <0x2a>; + }; + + videoin: adv7180@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + }; +}; + +&ldb { + status = "okay"; + lvds-channel@0 { + crtcs = <&ipu1 0>, <&ipu1 1>; + }; +}; + +&pcie { + reset-gpio = <&gpio1 29 0>; + status = "okay"; + + eth1: sky2@8 { /* MAC/PHY on bus 8 */ + compatible = "marvell,sky2"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_3>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5_1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; + cd-gpios = <&gpio7 0 0>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; diff --git a/target/linux/imx6/patches-3.10/110-gateworks-ventana.patch b/target/linux/imx6/patches-3.10/110-gateworks-ventana.patch new file mode 100644 index 0000000000..1385661b04 --- /dev/null +++ b/target/linux/imx6/patches-3.10/110-gateworks-ventana.patch @@ -0,0 +1,263 @@ +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -117,6 +117,15 @@ dtb-$(CONFIG_ARCH_MXC) += \ + imx6dl-sabresd.dtb \ + imx6dl-wandboard.dtb \ + imx6q-arm2.dtb \ ++ imx6q-gw51xx.dtb \ ++ imx6q-gw52xx.dtb \ ++ imx6q-gw53xx.dtb \ ++ imx6q-gw54xx.dtb \ ++ imx6q-gw5400-a.dtb \ ++ imx6dl-gw51xx.dtb \ ++ imx6dl-gw52xx.dtb \ ++ imx6dl-gw53xx.dtb \ ++ imx6dl-gw54xx.dtb \ + imx6q-sabreauto.dtb \ + imx6q-sabrelite.dtb \ + imx6q-sabresd.dtb \ +--- a/arch/arm/boot/dts/imx6q.dtsi ++++ b/arch/arm/boot/dts/imx6q.dtsi +@@ -212,6 +212,30 @@ + MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; ++ ++ /* No strobe */ ++ pinctrl_gpmi_nand_2: gpmi-nand-2 { ++ fsl,pins = < ++ MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1 ++ MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1 ++ MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 ++ MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000 ++ MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 ++ MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 ++ MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 ++ MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 ++ MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1 ++ MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1 ++ MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1 ++ MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1 ++ MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1 ++ MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1 ++ MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1 ++ MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1 ++ MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1 ++ MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1 ++ >; ++ }; + }; + + i2c1 { +@@ -230,6 +254,12 @@ + MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; ++ pinctrl_i2c2_2: i2c2grp-2 { ++ fsl,pins = < ++ MX6Q_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 ++ MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 ++ >; ++ }; + }; + + i2c3 { +@@ -239,6 +269,12 @@ + MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; ++ pinctrl_i2c3_2: i2c3grp-2 { ++ fsl,pins = < ++ MX6Q_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 ++ MX6Q_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 ++ >; ++ }; + }; + + uart1 { +@@ -248,6 +284,12 @@ + MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; ++ pinctrl_uart1_2: uart1grp-2 { ++ fsl,pins = < ++ MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 ++ MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 ++ >; ++ }; + }; + + uart2 { +@@ -257,6 +299,21 @@ + MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; ++ pinctrl_uart2_3: uart2grp-3 { ++ fsl,pins = < ++ MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 ++ MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 ++ >; ++ }; ++ }; ++ ++ uart3 { ++ pinctrl_uart3_3: uart3grp-3 { ++ fsl,pins = < ++ MX6Q_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 ++ MX6Q_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 ++ >; ++ }; + }; + + uart4 { +@@ -267,6 +324,15 @@ + >; + }; + }; ++ ++ uart5 { ++ pinctrl_uart5_1: uart5grp-1 { ++ fsl,pins = < ++ MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 ++ MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 ++ >; ++ }; ++ }; + + usbotg { + pinctrl_usbotg_1: usbotggrp-1 { +--- a/arch/arm/boot/dts/imx6dl.dtsi ++++ b/arch/arm/boot/dts/imx6dl.dtsi +@@ -37,6 +37,18 @@ + compatible = "fsl,imx6dl-iomuxc"; + reg = <0x020e0000 0x4000>; + ++ /* shared pinctrl settings */ ++ audmux { ++ pinctrl_audmux_1: audmux-1 { ++ fsl,pins = < ++ MX6DL_PAD_SD2_DAT0__AUD4_RXD 0x80000000 ++ MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000 ++ MX6DL_PAD_SD2_DAT2__AUD4_TXD 0x80000000 ++ MX6DL_PAD_SD2_DAT3__AUD4_TXC 0x80000000 ++ >; ++ }; ++ }; ++ + enet { + pinctrl_enet_1: enetgrp-1 { + fsl,pins = < +@@ -105,6 +117,59 @@ + }; + }; + ++ gpmi-nand { ++ /* No strobe */ ++ pinctrl_gpmi_nand_2: gpmi-nand-2 { ++ fsl,pins = < ++ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 ++ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 ++ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 ++ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000 ++ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 ++ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 ++ MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 ++ MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 ++ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 ++ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 ++ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 ++ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 ++ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 ++ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 ++ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 ++ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 ++ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 ++ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 ++ >; ++ }; ++ }; ++ ++ i2c1 { ++ pinctrl_i2c1_1: i2c1grp-1 { ++ fsl,pins = < ++ MX6DL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 ++ MX6DL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 ++ >; ++ }; ++ }; ++ ++ i2c2 { ++ pinctrl_i2c2_2: i2c2grp-2 { ++ fsl,pins = < ++ MX6DL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 ++ MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 ++ >; ++ }; ++ }; ++ ++ i2c3 { ++ pinctrl_i2c3_2: i2c3grp-2 { ++ fsl,pins = < ++ MX6DL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 ++ MX6DL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 ++ >; ++ }; ++ }; ++ + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < +@@ -112,6 +177,30 @@ + MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; ++ pinctrl_uart1_2: uart1grp-2 { ++ fsl,pins = < ++ MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 ++ MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 ++ >; ++ }; ++ }; ++ ++ uart2 { ++ pinctrl_uart2_3: uart2grp-3 { ++ fsl,pins = < ++ MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 ++ MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 ++ >; ++ }; ++ }; ++ ++ uart3 { ++ pinctrl_uart3_3: uart3grp-3 { ++ fsl,pins = < ++ MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 ++ MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 ++ >; ++ }; + }; + + uart4 { +@@ -123,7 +212,22 @@ + }; + }; + ++ uart5 { ++ pinctrl_uart5_1: uart5grp-1 { ++ fsl,pins = < ++ MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 ++ MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 ++ >; ++ }; ++ }; ++ + usbotg { ++ pinctrl_usbotg_1: usbotggrp-1 { ++ fsl,pins = < ++ MX6DL_PAD_GPIO_1__USB_OTG_ID 0x17059 ++ >; ++ }; ++ + pinctrl_usbotg_2: usbotggrp-2 { + fsl,pins = < + MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 diff --git a/target/linux/imx6/patches-3.10/110-gw5400-a.patch b/target/linux/imx6/patches-3.10/110-gw5400-a.patch deleted file mode 100644 index 5a3d610530..0000000000 --- a/target/linux/imx6/patches-3.10/110-gw5400-a.patch +++ /dev/null @@ -1,135 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -117,6 +117,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ - imx6dl-sabresd.dtb \ - imx6dl-wandboard.dtb \ - imx6q-arm2.dtb \ -+ imx6q-gw5400-a.dtb \ - imx6q-sabreauto.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb \ ---- a/arch/arm/boot/dts/imx6q.dtsi -+++ b/arch/arm/boot/dts/imx6q.dtsi -@@ -98,6 +98,14 @@ - MX6Q_PAD_CSI0_DAT6__AUD3_TXFS 0x80000000 - >; - }; -+ -+ pinctrl_audmux_3: audmux-3 { -+ fsl,pins = < -+ MX6Q_PAD_DISP0_DAT19__AUD5_RXD 0x80000000 -+ MX6Q_PAD_EIM_D25__AUD5_RXC 0x80000000 -+ MX6Q_PAD_DISP0_DAT18__AUD5_TXFS 0x80000000 -+ >; -+ }; - }; - - ecspi1 { -@@ -212,6 +220,30 @@ - MX6Q_PAD_SD4_DAT0__NAND_DQS 0x00b1 - >; - }; -+ -+ /* No strobe */ -+ pinctrl_gpmi_nand_2: gpmi-nand-2 { -+ fsl,pins = < -+ MX6Q_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6Q_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6Q_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6Q_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6Q_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6Q_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 -+ MX6Q_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 -+ MX6Q_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 -+ MX6Q_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6Q_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6Q_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6Q_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6Q_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6Q_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6Q_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6Q_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6Q_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6Q_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ >; -+ }; - }; - - i2c1 { -@@ -230,6 +262,12 @@ - MX6Q_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 - >; - }; -+ pinctrl_i2c2_2: i2c2grp-2 { -+ fsl,pins = < -+ MX6Q_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6Q_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; - }; - - i2c3 { -@@ -239,6 +277,12 @@ - MX6Q_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - >; - }; -+ pinctrl_i2c3_2: i2c3grp-2 { -+ fsl,pins = < -+ MX6Q_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6Q_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ >; -+ }; - }; - - uart1 { -@@ -248,6 +292,12 @@ - MX6Q_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; -+ pinctrl_uart1_2: uart1grp-2 { -+ fsl,pins = < -+ MX6Q_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -+ MX6Q_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 -+ >; -+ }; - }; - - uart2 { -@@ -257,6 +307,21 @@ - MX6Q_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 - >; - }; -+ pinctrl_uart2_2: uart2grp-2 { -+ fsl,pins = < -+ MX6Q_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6Q_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ >; -+ }; -+ }; -+ -+ uart3 { -+ pinctrl_uart3_1: uart3grp-1 { -+ fsl,pins = < -+ MX6Q_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1 -+ MX6Q_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1 -+ >; -+ }; - }; - - uart4 { -@@ -267,6 +332,15 @@ - >; - }; - }; -+ -+ uart5 { -+ pinctrl_uart5_1: uart5grp-1 { -+ fsl,pins = < -+ MX6Q_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 -+ MX6Q_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 -+ >; -+ }; -+ }; - - usbotg { - pinctrl_usbotg_1: usbotggrp-1 { diff --git a/target/linux/imx6/patches-3.10/111-gw54xx.patch b/target/linux/imx6/patches-3.10/111-gw54xx.patch deleted file mode 100644 index fa212ad711..0000000000 --- a/target/linux/imx6/patches-3.10/111-gw54xx.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -118,6 +118,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ - imx6dl-wandboard.dtb \ - imx6q-arm2.dtb \ - imx6q-gw5400-a.dtb \ -+ imx6q-gw54xx.dtb \ - imx6q-sabreauto.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb \ diff --git a/target/linux/imx6/patches-3.10/112-gw51xx.patch b/target/linux/imx6/patches-3.10/112-gw51xx.patch deleted file mode 100644 index e222984920..0000000000 --- a/target/linux/imx6/patches-3.10/112-gw51xx.patch +++ /dev/null @@ -1,161 +0,0 @@ ---- a/arch/arm/boot/dts/imx6dl.dtsi -+++ b/arch/arm/boot/dts/imx6dl.dtsi -@@ -105,6 +105,95 @@ - }; - }; - -+ gpmi-nand { -+ pinctrl_gpmi_nand_1: gpmi-nand-1 { -+ fsl,pins = < -+ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 -+ MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 -+ MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 -+ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ MX6DL_PAD_SD4_DAT0__NAND_DQS 0x00b1 -+ >; -+ }; -+ -+ /* No strobe */ -+ pinctrl_gpmi_nand_2: gpmi-nand-2 { -+ fsl,pins = < -+ MX6DL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 -+ MX6DL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 -+ MX6DL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 -+ MX6DL_PAD_NANDF_RB0__NAND_READY_B 0xb000 -+ MX6DL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 -+ MX6DL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 -+ MX6DL_PAD_NANDF_CS2__NAND_CE2_B 0xb0b1 -+ MX6DL_PAD_NANDF_CS3__NAND_CE3_B 0xb0b1 -+ MX6DL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 -+ MX6DL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 -+ MX6DL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 -+ MX6DL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 -+ MX6DL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 -+ MX6DL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 -+ MX6DL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 -+ MX6DL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 -+ MX6DL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 -+ MX6DL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 -+ >; -+ }; -+ }; -+ -+ i2c1 { -+ pinctrl_i2c1_1: i2c1grp-1 { -+ fsl,pins = < -+ MX6DL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 -+ MX6DL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 -+ >; -+ }; -+ }; -+ -+ i2c2 { -+ pinctrl_i2c2_1: i2c2grp-1 { -+ fsl,pins = < -+ MX6DL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 -+ MX6DL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ pinctrl_i2c2_2: i2c2grp-2 { -+ fsl,pins = < -+ MX6DL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 -+ MX6DL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 -+ >; -+ }; -+ }; -+ -+ i2c3 { -+ pinctrl_i2c3_1: i2c3grp-1 { -+ fsl,pins = < -+ MX6DL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 -+ MX6DL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 -+ >; -+ }; -+ pinctrl_i2c3_2: i2c3grp-2 { -+ fsl,pins = < -+ MX6DL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 -+ MX6DL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 -+ >; -+ }; -+ }; -+ - uart1 { - pinctrl_uart1_1: uart1grp-1 { - fsl,pins = < -@@ -112,6 +201,36 @@ - MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 - >; - }; -+ pinctrl_uart1_2: uart1grp-2 { -+ fsl,pins = < -+ MX6DL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 -+ MX6DL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -+ >; -+ }; -+ }; -+ -+ uart2 { -+ pinctrl_uart2_1: uart2grp-1 { -+ fsl,pins = < -+ MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ >; -+ }; -+ pinctrl_uart2_2: uart2grp-2 { -+ fsl,pins = < -+ MX6DL_PAD_SD4_DAT7__UART2_RX_DATA 0x1b0b1 -+ MX6DL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 -+ >; -+ }; -+ }; -+ -+ uart3 { -+ pinctrl_uart3_1: uart3grp-1 { -+ fsl,pins = < -+ MX6DL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 -+ MX6DL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 -+ >; -+ }; - }; - - uart4 { -@@ -122,6 +241,15 @@ - >; - }; - }; -+ -+ uart5 { -+ pinctrl_uart5_1: uart5grp-1 { -+ fsl,pins = < -+ MX6DL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 -+ MX6DL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 -+ >; -+ }; -+ }; - - usbotg { - pinctrl_usbotg_2: usbotggrp-2 { ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -119,6 +119,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ - imx6q-arm2.dtb \ - imx6q-gw5400-a.dtb \ - imx6q-gw54xx.dtb \ -+ imx6dl-gw51xx.dtb \ - imx6q-sabreauto.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb \ diff --git a/target/linux/imx6/patches-3.10/113-gw52xx.patch b/target/linux/imx6/patches-3.10/113-gw52xx.patch deleted file mode 100644 index 6e48d30272..0000000000 --- a/target/linux/imx6/patches-3.10/113-gw52xx.patch +++ /dev/null @@ -1,57 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -120,6 +120,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ - imx6q-gw5400-a.dtb \ - imx6q-gw54xx.dtb \ - imx6dl-gw51xx.dtb \ -+ imx6dl-gw52xx.dtb \ - imx6q-sabreauto.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb \ ---- a/arch/arm/boot/dts/imx6dl.dtsi -+++ b/arch/arm/boot/dts/imx6dl.dtsi -@@ -37,6 +37,18 @@ - compatible = "fsl,imx6dl-iomuxc"; - reg = <0x020e0000 0x4000>; - -+ /* shared pinctrl settings */ -+ audmux { -+ pinctrl_audmux_1: audmux-1 { -+ fsl,pins = < -+ MX6DL_PAD_SD2_DAT0__AUD4_RXD 0x80000000 -+ MX6DL_PAD_SD2_DAT1__AUD4_TXFS 0x80000000 -+ MX6DL_PAD_SD2_DAT2__AUD4_TXD 0x80000000 -+ MX6DL_PAD_SD2_DAT3__AUD4_TXC 0x80000000 -+ >; -+ }; -+ }; -+ - enet { - pinctrl_enet_1: enetgrp-1 { - fsl,pins = < -@@ -222,6 +234,12 @@ - MX6DL_PAD_SD4_DAT4__UART2_TX_DATA 0x1b0b1 - >; - }; -+ pinctrl_uart2_3: uart2grp-3 { -+ fsl,pins = < -+ MX6DL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 -+ MX6DL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 -+ >; -+ }; - }; - - uart3 { -@@ -252,6 +270,12 @@ - }; - - usbotg { -+ pinctrl_usbotg_1: usbotggrp-1 { -+ fsl,pins = < -+ MX6DL_PAD_GPIO_1__USB_OTG_ID 0x17059 -+ >; -+ }; -+ - pinctrl_usbotg_2: usbotggrp-2 { - fsl,pins = < - MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 diff --git a/target/linux/imx6/patches-3.10/114-gw53xx.patch b/target/linux/imx6/patches-3.10/114-gw53xx.patch deleted file mode 100644 index 9c31204640..0000000000 --- a/target/linux/imx6/patches-3.10/114-gw53xx.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -121,6 +121,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ - imx6q-gw54xx.dtb \ - imx6dl-gw51xx.dtb \ - imx6dl-gw52xx.dtb \ -+ imx6dl-gw53xx.dtb \ - imx6q-sabreauto.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb \ diff --git a/target/linux/imx6/profiles/120-gateworks.mk b/target/linux/imx6/profiles/120-gateworks.mk index 13c4359615..f74e2d8e8f 100644 --- a/target/linux/imx6/profiles/120-gateworks.mk +++ b/target/linux/imx6/profiles/120-gateworks.mk @@ -40,7 +40,11 @@ VENTANA_DTS:= \ imx6dl-gw51xx \ imx6dl-gw52xx \ imx6dl-gw53xx \ - imx6q-gw5400-a \ - imx6q-gw54xx + imx6dl-gw54xx \ + imx6q-gw51xx \ + imx6q-gw52xx \ + imx6q-gw53xx \ + imx6q-gw54xx \ + imx6q-gw5400-a $(eval $(call Profile,VENTANA)) |