aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/ar71xx/base-files/etc/uci-defaults/01_leds5
-rw-r--r--target/linux/ar71xx/base-files/etc/uci-defaults/02_network1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.15
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c137
-rw-r--r--target/linux/ar71xx/generic/profiles/arduino.mk19
-rw-r--r--target/linux/ar71xx/image/Makefile5
-rw-r--r--target/linux/ar71xx/patches-4.1/822-MIPS-ath79-Arduino-yun-support.patch42
9 files changed, 217 insertions, 1 deletions
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 1db6ad0482..39f472a5bb 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -43,6 +43,11 @@ antminer-s3)
ucidef_set_led_default "lan" "LAN" "antminer-s3:yellow:lan" "0"
;;
+arduino-yun)
+ ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
+ ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
+ ;;
+
ap113)
ucidef_set_led_usbdev "usb" "USB" "ap113:green:usb" "1-1"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 2cba1558a6..2765adb112 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -388,6 +388,7 @@ wp543)
ucidef_set_interface_lan "eth0"
;;
+arduino-yun | \
dir-505-a1)
ucidef_set_interface_lan "eth1"
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 8f3bf1d2b4..0e92ee7912 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -359,6 +359,9 @@ ar71xx_board_detect() {
*Antminer-S3)
name="antminer-s3"
;;
+ *"Arduino Yun")
+ name="arduino-yun"
+ ;;
*AP113)
name="ap113"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 78630931b2..b97c076519 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -173,6 +173,7 @@ platform_check_image() {
;;
alfa-ap96 | \
alfa-nx | \
+ arduino-yun | \
ap113 | \
ap121 | \
ap121-mini | \
diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
index b877514267..08e252df44 100644
--- a/target/linux/ar71xx/config-4.1
+++ b/target/linux/ar71xx/config-4.1
@@ -46,6 +46,7 @@ CONFIG_ATH79_MACH_AP81=y
CONFIG_ATH79_MACH_AP83=y
CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C7=y
+CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
CONFIG_ATH79_MACH_BSB=y
@@ -193,6 +194,8 @@ CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_EARLY_PRINTK=y
@@ -334,7 +337,7 @@ CONFIG_SOC_AR933X=y
CONFIG_SOC_AR934X=y
CONFIG_SOC_QCA953X=y
CONFIG_SOC_QCA955X=y
-# CONFIG_SOC_QCA956X is not set
+CONFIG_SOC_QCA956X=y
CONFIG_SPI=y
CONFIG_SPI_AP83=y
CONFIG_SPI_ATH79=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
new file mode 100644
index 0000000000..fbe1f99c79
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
@@ -0,0 +1,137 @@
+/*
+ * Arduino Yun support
+ *
+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <asm/mach-ath79/ath79.h>
+#include "common.h"
+#include "gpio.h"
+#include "linux/gpio.h"
+
+// Uncomment to have reset on gpio18 instead of gipo7
+#define DS2_B
+
+#define DS_GPIO_LED_WLAN 0
+#define DS_GPIO_LED_USB 1
+
+#define DS_GPIO_OE 21
+#define DS_GPIO_AVR_RESET 18
+
+// Maintained to have the console in the previous version of DS2 working
+#define DS_GPIO_AVR_RESET_DS2 7
+
+#define DS_GPIO_OE2 22
+#define DS_GPIO_UART_ENA 23
+#define DS_GPIO_CONF_BTN 20
+
+#define DS_KEYS_POLL_INTERVAL 20 /* msecs */
+#define DS_KEYS_DEBOUNCE_INTERVAL (3 * DS_KEYS_POLL_INTERVAL)
+
+#define DS_MAC0_OFFSET 0x0000
+#define DS_MAC1_OFFSET 0x0006
+#define DS_CALDATA_OFFSET 0x1000
+#define DS_WMAC_MAC_OFFSET 0x1002
+
+
+static struct gpio_led ds_leds_gpio[] __initdata = {
+ {
+ .name = "arduino:white:usb",
+ .gpio = DS_GPIO_LED_USB,
+ .active_low = 0,
+ },
+ {
+ .name = "arduino:blue:wlan",
+ .gpio = DS_GPIO_LED_WLAN,
+ .active_low = 0,
+ },
+};
+
+static void __init ds_common_setup(void)
+{
+ static u8 mac[6];
+
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ ath79_register_m25p80(NULL);
+
+ if (ar93xx_wmac_read_mac_address(mac)) {
+ ath79_register_wmac(NULL, NULL);
+ } else {
+ ath79_register_wmac(art + DS_CALDATA_OFFSET,
+ art + DS_WMAC_MAC_OFFSET);
+ memcpy(mac, art + DS_WMAC_MAC_OFFSET, sizeof(mac));
+ }
+
+ mac[3] |= 0x08;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+
+ mac[3] &= 0xF7;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_mdio(0, 0x0);
+
+ /* LAN ports */
+ ath79_register_eth(1);
+
+ /* WAN port */
+ ath79_register_eth(0);
+}
+
+static void __init ds_setup(void)
+{
+ u32 t;
+
+ ds_common_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ds_leds_gpio),
+ ds_leds_gpio);
+ ath79_register_usb();
+
+ //Disable the Function for some pins to have GPIO functionality active
+ // GPIO6-7-8 and GPIO11
+ ath79_gpio_function_setup(AR933X_GPIO_FUNC_JTAG_DISABLE | AR933X_GPIO_FUNC_I2S_MCK_EN, 0);
+
+ ath79_gpio_function2_setup(AR933X_GPIO_FUNC2_JUMPSTART_DISABLE, 0);
+
+ printk("Setting DogStick2 GPIO\n");
+
+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
+ t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
+ ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
+
+ // Put the avr reset to high
+ if (gpio_request_one(DS_GPIO_AVR_RESET_DS2,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0)
+ printk("Error setting GPIO OE\n");
+ gpio_unexport(DS_GPIO_AVR_RESET_DS2);
+ gpio_free(DS_GPIO_AVR_RESET_DS2);
+
+ // enable OE of level shifter
+ if (gpio_request_one(DS_GPIO_OE,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0)
+ printk("Error setting GPIO OE\n");
+
+ if (gpio_request_one(DS_GPIO_UART_ENA,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "UART-ENA") != 0)
+ printk("Error setting GPIO Uart Enable\n");
+
+ // enable OE of level shifter
+ if (gpio_request_one(DS_GPIO_OE2,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-2") != 0)
+ printk("Error setting GPIO OE2\n");
+}
+
+MIPS_MACHINE(ATH79_MACH_ARDUINO_YUN, "Yun", "Arduino Yun", ds_setup);
diff --git a/target/linux/ar71xx/generic/profiles/arduino.mk b/target/linux/ar71xx/generic/profiles/arduino.mk
new file mode 100644
index 0000000000..8ae5054a7e
--- /dev/null
+++ b/target/linux/ar71xx/generic/profiles/arduino.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (C) 2009-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Yun
+ NAME:=Arduino Yun based on Atheros AR9331
+ PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+define Profile/Yun/Description
+ Package set optimized for the Arduino Yun.
+ This is sometimes also named Genuino Yun or Linino Yun.
+endef
+
+$(eval $(call Profile,Yun))
+
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index 11cf7165c3..0484f0700c 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -1489,6 +1489,8 @@ mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdat
mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi)
qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
+yun_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6464k(rootfs),1280k(kernel),64k(nvram),64k(art),7744k@0x50000(firmware)
+yun_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14656k(rootfs),1280k(kernel),64k(nvram),64k(art),15936k@0x50000(firmware)
define Image/BuildKernel
@@ -2249,6 +2251,8 @@ $(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(
$(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,115200,$$(wpj344_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536))
+$(eval $(call SingleProfile,AthLzma,64k,YUN_8M,yun-8M,Yun,ttyATH0,250000,$$(yun_mtdlayout_8M),RKuImage))
+$(eval $(call SingleProfile,AthLzma,64k,YUN_16M,yun-16M,Yun,ttyATH0,250000,$$(yun_mtdlayout_16M),RKuImage))
$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
@@ -2375,6 +2379,7 @@ $(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M))
$(eval $(call MultiProfile,WPJ344,WPJ344_16M))
$(eval $(call MultiProfile,WPJ531,WPJ531_16M))
$(eval $(call MultiProfile,WPJ558,WPJ558_16M))
+$(eval $(call MultiProfile,Yun,YUN_16M YUN_8M))
$(eval $(call MultiProfile,Minimal,$(SINGLE_PROFILES)))
$(eval $(call MultiProfile,Madwifi,EAP7660D WP543))
diff --git a/target/linux/ar71xx/patches-4.1/822-MIPS-ath79-Arduino-yun-support.patch b/target/linux/ar71xx/patches-4.1/822-MIPS-ath79-Arduino-yun-support.patch
new file mode 100644
index 0000000000..70073109f4
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.1/822-MIPS-ath79-Arduino-yun-support.patch
@@ -0,0 +1,42 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -76,6 +76,19 @@ config ATH79_MACH_ANTMINER_S3
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_ARDUINO_YUN
++ bool "Arduino Yun"
++ select SOC_AR933X
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++ help
++ Say 'Y' here if you want your kernel to support the
++ Arduino Yun.
++
+ config ATH79_MACH_AP113
+ bool "Atheros AP113 board support"
+ select SOC_AR724X
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -23,6 +23,7 @@ enum ath79_mach_type {
+ ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
+ ATH79_MACH_ANTMINER_S1, /* Antminer S1 */
+ ATH79_MACH_ANTMINER_S3, /* Antminer S3 */
++ ATH79_MACH_ARDUINO_YUN, /* Yun */
+ ATH79_MACH_AP113, /* Atheros AP113 reference board */
+ ATH79_MACH_AP121, /* Atheros AP121 reference board */
+ ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -44,6 +44,7 @@ obj-$(CONFIG_ATH79_MACH_ALL0258N) += mac
+ obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
+ obj-$(CONFIG_ATH79_MACH_ANTMINER_S1)+= mach-antminer-s1.o
+ obj-$(CONFIG_ATH79_MACH_ANTMINER_S3)+= mach-antminer-s3.o
++obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
+ obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
+ obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
+ obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o