aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/kirkwood/config-4.9333
-rw-r--r--target/linux/kirkwood/patches-4.9/100-ib62x0.patch30
-rw-r--r--target/linux/kirkwood/patches-4.9/101-iconnect.patch50
-rw-r--r--target/linux/kirkwood/patches-4.9/102-dockstar.patch32
-rw-r--r--target/linux/kirkwood/patches-4.9/103-iomega-ix2-200.patch33
-rw-r--r--target/linux/kirkwood/patches-4.9/104-ea3500.patch258
-rw-r--r--target/linux/kirkwood/patches-4.9/105-ea4500.patch64
-rw-r--r--target/linux/kirkwood/patches-4.9/105-goflexhome.patch130
-rw-r--r--target/linux/kirkwood/patches-4.9/106-goflexnet.patch23
-rw-r--r--target/linux/kirkwood/patches-4.9/107-01-zyxel-nsa3x0-common-nand-partitions.patch48
-rw-r--r--target/linux/kirkwood/patches-4.9/107-02-nsa310b.patch147
-rw-r--r--target/linux/kirkwood/patches-4.9/108-on100.patch173
-rw-r--r--target/linux/kirkwood/patches-4.9/109-pogoplug_v4.patch59
-rw-r--r--target/linux/kirkwood/patches-4.9/200-disable-tso.patch35
-rw-r--r--target/linux/kirkwood/patches-4.9/201-enable-sata-port-specific-led-triggers.patch10
-rw-r--r--target/linux/kirkwood/patches-4.9/202-linksys-find-active-root.patch62
16 files changed, 0 insertions, 1487 deletions
diff --git a/target/linux/kirkwood/config-4.9 b/target/linux/kirkwood/config-4.9
deleted file mode 100644
index 86d999edb1..0000000000
--- a/target/linux/kirkwood/config-4.9
+++ /dev/null
@@ -1,333 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_CPU_AUTO=y
-# CONFIG_ARCH_MULTI_V4 is not set
-# CONFIG_ARCH_MULTI_V4T is not set
-CONFIG_ARCH_MULTI_V4_V5=y
-CONFIG_ARCH_MULTI_V5=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_ARCH_OXNAS is not set
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_LIBATA_LEDS=y
-CONFIG_ARM=y
-# CONFIG_ARMADA_THERMAL is not set
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_HAS_SG_CHAIN=y
-# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_LEDS=y
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_BINFMT_FLAT is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FEROCEON=y
-# CONFIG_CPU_FEROCEON_OLD_ID is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART0_ALTERNATE=y
-# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xf1012000
-CONFIG_DEBUG_UART_VIRT=0xfed12000
-CONFIG_DEBUG_UNCOMPRESS=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DLCI is not set
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXT4_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KIRKWOOD_CLK=y
-CONFIG_KIRKWOOD_THERMAL=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_NETXBIG=y
-CONFIG_LEDS_NS2=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIBFDT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_KIRKWOOD=y
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MFD_MAX77620 is not set
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MVSDIO=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ORION=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MV643XX_ETH=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-# CONFIG_MVNETA is not set
-CONFIG_MVSW61XX_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_IRQCHIP=y
-CONFIG_ORION_TIMER=y
-CONFIG_ORION_WATCHDOG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_MVEBU_SATA=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_KIRKWOOD=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PLAT_ORION=y
-CONFIG_POWER_RESET=y
-# CONFIG_POWER_RESET_BRCMKONA is not set
-CONFIG_POWER_RESET_GPIO=y
-# CONFIG_POWER_RESET_QNAP is not set
-CONFIG_POWER_SUPPLY=y
-CONFIG_RATIONAL=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MV=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SATA_MV=y
-# CONFIG_SCHED_INFO is not set
-CONFIG_SCSI=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_FSL=y
-# CONFIG_SERIAL_MVEBU_UART is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SG_POOL=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_ORION=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_ORION=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_LED_TRIG=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WAN=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/kirkwood/patches-4.9/100-ib62x0.patch b/target/linux/kirkwood/patches-4.9/100-ib62x0.patch
deleted file mode 100644
index f4e6947374..0000000000
--- a/target/linux/kirkwood/patches-4.9/100-ib62x0.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
-+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
-@@ -5,7 +5,7 @@
-
- / {
- model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
-- compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+ compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- memory {
- device_type = "memory";
-@@ -117,13 +117,13 @@
- };
-
- partition@100000 {
-- label = "uImage";
-- reg = <0x0100000 0x600000>;
-+ label = "second stage u-boot";
-+ reg = <0x100000 0x200000>;
- };
-
-- partition@700000 {
-- label = "root";
-- reg = <0x0700000 0xf900000>;
-+ partition@200000 {
-+ label = "ubi";
-+ reg = <0x200000 0xfe00000>;
- };
-
- };
diff --git a/target/linux/kirkwood/patches-4.9/101-iconnect.patch b/target/linux/kirkwood/patches-4.9/101-iconnect.patch
deleted file mode 100644
index 17705eae19..0000000000
--- a/target/linux/kirkwood/patches-4.9/101-iconnect.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iconnect.dts
-+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -15,8 +15,6 @@
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
-- linux,initrd-start = <0x4500040>;
-- linux,initrd-end = <0x4800000>;
- };
-
- ocp@f1000000 {
-@@ -145,28 +143,23 @@
- status = "okay";
-
- partition@0 {
-- label = "uboot";
-- reg = <0x0000000 0xc0000>;
-+ label = "u-boot";
-+ reg = <0x0000000 0xe0000>;
- };
-
-- partition@a0000 {
-- label = "env";
-- reg = <0xa0000 0x20000>;
-+ partition@e0000 {
-+ label = "u-boot environment";
-+ reg = <0xe0000 0x100000>;
- };
-
- partition@100000 {
-- label = "zImage";
-- reg = <0x100000 0x300000>;
-+ label = "second stage u-boot";
-+ reg = <0x100000 0x200000>;
- };
-
-- partition@540000 {
-- label = "initrd";
-- reg = <0x540000 0x300000>;
-- };
--
-- partition@980000 {
-- label = "boot";
-- reg = <0x980000 0x1f400000>;
-+ partition@200000 {
-+ label = "ubi";
-+ reg = <0x200000 0x1fe00000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-4.9/102-dockstar.patch b/target/linux/kirkwood/patches-4.9/102-dockstar.patch
deleted file mode 100644
index f66e19d27f..0000000000
--- a/target/linux/kirkwood/patches-4.9/102-dockstar.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-dockstar.dts
-+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
-@@ -77,18 +77,22 @@
-
- partition@0 {
- label = "u-boot";
-- reg = <0x0000000 0x100000>;
-- read-only;
-+ reg = <0x0000000 0xe0000>;
-+ };
-+
-+ partition@e0000 {
-+ label = "u-boot environment";
-+ reg = <0xe0000 0x100000>;
- };
-
- partition@100000 {
-- label = "uImage";
-- reg = <0x0100000 0x400000>;
-+ label = "second stage u-boot";
-+ reg = <0x100000 0x200000>;
- };
-
-- partition@500000 {
-- label = "data";
-- reg = <0x0500000 0xfb00000>;
-+ partition@200000 {
-+ label = "ubi";
-+ reg = <0x200000 0xfe00000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-4.9/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-4.9/103-iomega-ix2-200.patch
deleted file mode 100644
index f3c06cd5f0..0000000000
--- a/target/linux/kirkwood/patches-4.9/103-iomega-ix2-200.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-@@ -185,18 +185,18 @@
- };
-
- partition@a0000 {
-- label = "env";
-+ label = "u-boot environment";
- reg = <0xa0000 0x20000>;
- read-only;
- };
-
- partition@100000 {
-- label = "uImage";
-+ label = "kernel";
- reg = <0x100000 0x300000>;
- };
-
- partition@400000 {
-- label = "rootfs";
-+ label = "ubi";
- reg = <0x400000 0x1C00000>;
- };
- };
-@@ -210,7 +210,7 @@
- };
-
- &eth0 {
-- status = "okay";
-+ status = "disabled";
- ethernet0-port@0 {
- speed = <1000>;
- duplex = <1>;
diff --git a/target/linux/kirkwood/patches-4.9/104-ea3500.patch b/target/linux/kirkwood/patches-4.9/104-ea3500.patch
deleted file mode 100644
index 3659f879b9..0000000000
--- a/target/linux/kirkwood/patches-4.9/104-ea3500.patch
+++ /dev/null
@@ -1,258 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -220,6 +220,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- kirkwood-linkstation-lswsxl.dtb \
- kirkwood-linkstation-lswvl.dtb \
- kirkwood-linkstation-lswxl.dtb \
-+ kirkwood-linksys-audi.dtb \
- kirkwood-linksys-viper.dtb \
- kirkwood-lschlv2.dtb \
- kirkwood-lsxhl.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
-@@ -0,0 +1,245 @@
-+/*
-+ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
-+ *
-+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
-+ * (c) 2013 Deutsche Telekom Innovation Laboratories
-+ * (c) 2014 Luka Perkov <luka@openwrt.org>
-+ * (c) 2014 Dan Walters <dan@walters.io>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2. This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+ model = "Linksys Audi (EA3500)";
-+ compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x4000000>;
-+ };
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ gpio_keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-+ pinctrl-names = "default";
-+
-+ wps {
-+ label = "WPS Button";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ reset {
-+ label = "Reset Button";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = < &pmx_led_green_power >;
-+ pinctrl-names = "default";
-+
-+ green-power {
-+ label = "audi:green:power";
-+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ mvsw61xx {
-+ compatible = "marvell,88e6171";
-+ status = "okay";
-+ reg = <0x10>;
-+
-+ mii-bus = <&mdio>;
-+ cpu-port-0 = <5>;
-+ cpu-port-1 = <6>;
-+ is-indirect;
-+ };
-+
-+ dsa {
-+ compatible = "marvell,dsa";
-+ #address-cells = <2>;
-+ #size-cells = <0>;
-+
-+ dsa,ethernet = <&eth0port>;
-+ dsa,mii-bus = <&mdio>;
-+
-+ switch@16,0 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <16 0>; /* MDIO address 16, switch 0 in tree */
-+
-+ port@0 {
-+ reg = <0>;
-+ label = "ethernet1";
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "ethernet2";
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "ethernet3";
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "ethernet4";
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "internet";
-+ };
-+
-+ port@5 {
-+ reg = <5>;
-+ label = "cpu";
-+ };
-+ };
-+ };
-+};
-+
-+&pinctrl {
-+ pmx_led_green_power: pmx-led-green-power {
-+ marvell,pins = "mpp7";
-+ marvell,function = "gpo";
-+ };
-+ pmx_btn_wps: pmx-btn-wps {
-+ marvell,pins = "mpp47";
-+ marvell,function = "gpio";
-+ };
-+ pmx_btn_reset: pmx-btn-reset {
-+ marvell,pins = "mpp48";
-+ marvell,function = "gpio";
-+ };
-+};
-+
-+&nand {
-+ status = "okay";
-+ pinctrl-0 = <&pmx_nand>;
-+ pinctrl-names = "default";
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0 0x80000>;
-+ read-only;
-+ };
-+
-+ partition@80000 {
-+ label = "u_env";
-+ reg = <0x80000 0x4000>;
-+ };
-+
-+ partition@84000 {
-+ label = "s_env";
-+ reg = <0x84000 0x4000>;
-+ };
-+
-+ partition@200000 {
-+ label = "kernel1";
-+ reg = <0x200000 0x290000>;
-+ };
-+
-+ partition@490000 {
-+ label = "rootfs1";
-+ reg = <0x490000 0x1170000>;
-+ };
-+
-+ partition@1600000 {
-+ label = "kernel2";
-+ reg = <0x1600000 0x290000>;
-+ };
-+
-+ partition@1890000 {
-+ label = "rootfs2";
-+ reg = <0x1890000 0x1170000>;
-+ };
-+
-+ partition@2a00000 {
-+ label = "syscfg";
-+ reg = <0x2a00000 0x1600000>;
-+ };
-+
-+ partition@88000 {
-+ label = "unused";
-+ reg = <0x88000 0x178000>;
-+ };
-+
-+ };
-+};
-+
-+&pciec {
-+ status = "okay";
-+};
-+
-+&pcie0 {
-+ status = "okay";
-+};
-+
-+&pcie1 {
-+ status = "okay";
-+};
-+
-+&mdio {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
-+ * fixed speed and duplex.
-+ */
-+&eth0 {
-+ status = "okay";
-+ ethernet0-port@0 {
-+ speed = <1000>;
-+ duplex = <1>;
-+ };
-+};
-+
-+/* eth1 is connected to the switch at port 6. However DSA only supports a
-+ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
-+ */
-+&eth1 {
-+ status = "okay";
-+ ethernet1-port@0 {
-+ speed = <1000>;
-+ duplex = <1>;
-+ };
-+};
-+
-+/* There is no battery on the board, so the RTC does not keep
-+ * time when there is no power, making it useless.
-+ */
-+&rtc {
-+ status = "disabled";
-+};
diff --git a/target/linux/kirkwood/patches-4.9/105-ea4500.patch b/target/linux/kirkwood/patches-4.9/105-ea4500.patch
deleted file mode 100644
index d76cdace51..0000000000
--- a/target/linux/kirkwood/patches-4.9/105-ea4500.patch
+++ /dev/null
@@ -1,64 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-@@ -69,6 +69,17 @@
- };
- };
-
-+ mvsw61xx {
-+ compatible = "marvell,88e6171";
-+ status = "okay";
-+ reg = <0x10>;
-+
-+ mii-bus = <&mdio>;
-+ cpu-port-0 = <5>;
-+ cpu-port-1 = <6>;
-+ is-indirect;
-+ };
-+
- dsa {
- compatible = "marvell,dsa";
- #address-cells = <2>;
-@@ -161,22 +172,22 @@
- };
-
- partition@200000 {
-- label = "kernel";
-+ label = "kernel1";
- reg = <0x200000 0x2A0000>;
- };
-
- partition@4A0000 {
-- label = "rootfs";
-+ label = "rootfs1";
- reg = <0x4A0000 0x1760000>;
- };
-
- partition@1C00000 {
-- label = "alt_kernel";
-+ label = "kernel2";
- reg = <0x1C00000 0x2A0000>;
- };
-
- partition@1EA0000 {
-- label = "alt_rootfs";
-+ label = "rootfs2";
- reg = <0x1EA0000 0x1760000>;
- };
-
-@@ -225,10 +236,14 @@
- };
-
- /* eth1 is connected to the switch at port 6. However DSA only supports a
-- * single CPU port. So leave this port disabled to avoid confusion.
-+ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
- */
- &eth1 {
-- status = "disabled";
-+ status = "okay";
-+ ethernet1-port@0 {
-+ speed = <1000>;
-+ duplex = <1>;
-+ };
- };
-
- /* There is no battery on the board, so the RTC does not keep
diff --git a/target/linux/kirkwood/patches-4.9/105-goflexhome.patch b/target/linux/kirkwood/patches-4.9/105-goflexhome.patch
deleted file mode 100644
index 0962249664..0000000000
--- a/target/linux/kirkwood/patches-4.9/105-goflexhome.patch
+++ /dev/null
@@ -1,130 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -207,6 +207,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- kirkwood-ds411.dtb \
- kirkwood-ds411j.dtb \
- kirkwood-ds411slim.dtb \
-+ kirkwood-goflexhome.dtb \
- kirkwood-goflexnet.dtb \
- kirkwood-guruplug-server-plus.dtb \
- kirkwood-ib62x0.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
-@@ -0,0 +1,117 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+ model = "Seagate GoFlex Home";
-+ compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x8000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-+ stdout-path = &uart0;
-+ };
-+
-+ ocp@f1000000 {
-+ pinctrl: pin-controller@10000 {
-+ pmx_usb_power_enable: pmx-usb-power-enable {
-+ marvell,pins = "mpp29";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_white: pmx-led-white {
-+ marvell,pins = "mpp40";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_green: pmx-led_green {
-+ marvell,pins = "mpp46";
-+ marvell,function = "gpio";
-+ };
-+ pmx_led_orange: pmx-led-orange {
-+ marvell,pins = "mpp47";
-+ marvell,function = "gpio";
-+ };
-+ };
-+ serial@12000 {
-+ status = "ok";
-+ };
-+
-+ sata@80000 {
-+ status = "okay";
-+ nr-ports = <2>;
-+ };
-+
-+ };
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+
-+ health {
-+ label = "status:green:health";
-+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+ fault {
-+ label = "status:orange:fault";
-+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+ };
-+ misc {
-+ label = "status:white:misc";
-+ gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "disk-activity";
-+ };
-+ };
-+ regulators {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-0 = <&pmx_usb_power_enable>;
-+ pinctrl-names = "default";
-+
-+ usb_power: regulator@1 {
-+ compatible = "regulator-fixed";
-+ reg = <1>;
-+ regulator-name = "USB Power";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ enable-active-high;
-+ regulator-always-on;
-+ regulator-boot-on;
-+ gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&nand {
-+ chip-delay = <40>;
-+ status = "okay";
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x0000000 0x100000>;
-+ read-only;
-+ };
-+
-+ partition@100000 {
-+ label = "ubi";
-+ reg = <0x100000 0x0ff00000>;
-+ };
-+};
-+
-+&mdio {
-+ status = "okay";
-+
-+ ethphy0: ethernet-phy@0 {
-+ reg = <0>;
-+ };
-+};
-+
-+&eth0 {
-+ status = "okay";
-+ ethernet0-port@0 {
-+ phy-handle = <&ethphy0>;
-+ };
-+};
diff --git a/target/linux/kirkwood/patches-4.9/106-goflexnet.patch b/target/linux/kirkwood/patches-4.9/106-goflexnet.patch
deleted file mode 100644
index 9b0620b818..0000000000
--- a/target/linux/kirkwood/patches-4.9/106-goflexnet.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
-+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
-@@ -158,18 +158,8 @@
- };
-
- partition@100000 {
-- label = "uImage";
-- reg = <0x0100000 0x400000>;
-- };
--
-- partition@500000 {
-- label = "pogoplug";
-- reg = <0x0500000 0x2000000>;
-- };
--
-- partition@2500000 {
-- label = "root";
-- reg = <0x02500000 0xd800000>;
-+ label = "ubi";
-+ reg = <0x0100000 0x0ff00000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-4.9/107-01-zyxel-nsa3x0-common-nand-partitions.patch b/target/linux/kirkwood/patches-4.9/107-01-zyxel-nsa3x0-common-nand-partitions.patch
deleted file mode 100644
index a358e3962e..0000000000
--- a/target/linux/kirkwood/patches-4.9/107-01-zyxel-nsa3x0-common-nand-partitions.patch
+++ /dev/null
@@ -1,48 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
-+++ b/arch/arm/boot/dts/kirkwood-nsa3x0-common.dtsi
-@@ -111,40 +111,16 @@
-
- partition@0 {
- label = "uboot";
-- reg = <0x0000000 0x0100000>;
-+ reg = <0x0000000 0x00c0000>;
- read-only;
- };
- partition@100000 {
- label = "uboot_env";
-- reg = <0x0100000 0x0080000>;
-+ reg = <0x00c0000 0x0080000>;
- };
-- partition@180000 {
-- label = "key_store";
-- reg = <0x0180000 0x0080000>;
-- };
-- partition@200000 {
-- label = "info";
-- reg = <0x0200000 0x0080000>;
-- };
-- partition@280000 {
-- label = "etc";
-- reg = <0x0280000 0x0a00000>;
-- };
-- partition@c80000 {
-- label = "kernel_1";
-- reg = <0x0c80000 0x0a00000>;
-- };
-- partition@1680000 {
-- label = "rootfs1";
-- reg = <0x1680000 0x2fc0000>;
-- };
-- partition@4640000 {
-- label = "kernel_2";
-- reg = <0x4640000 0x0a00000>;
-- };
-- partition@5040000 {
-- label = "rootfs2";
-- reg = <0x5040000 0x2fc0000>;
-+ partition@140000 {
-+ label = "ubi";
-+ reg = <0x0140000 0x7ec0000>;
- };
- };
-
diff --git a/target/linux/kirkwood/patches-4.9/107-02-nsa310b.patch b/target/linux/kirkwood/patches-4.9/107-02-nsa310b.patch
deleted file mode 100644
index faf8d891a5..0000000000
--- a/target/linux/kirkwood/patches-4.9/107-02-nsa310b.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-kirkwood: add nsa310b dtb, a zyxel nsa310 variant
-
-add support to a nsa310 variant with red/green usb led
-and lm85 temp/fan controller
-
-Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
-
-NOTE: this patch can be upstreamed as-is, LEDE-specific
- nand partitions are set in another patch
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -238,6 +238,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- kirkwood-ns2mini.dtb \
- kirkwood-nsa310.dtb \
- kirkwood-nsa310a.dtb \
-+ kirkwood-nsa310b.dtb \
- kirkwood-nsa320.dtb \
- kirkwood-nsa325.dtb \
- kirkwood-openblocks_a6.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts
-@@ -0,0 +1,124 @@
-+/dts-v1/;
-+
-+#include "kirkwood-nsa3x0-common.dtsi"
-+
-+/*
-+ * There are at least two different NSA310 designs. This variant has
-+ * a red/green USB Led (same as nsa310) and a lm85 temp/fan controller.
-+ */
-+
-+/ {
-+ model = "ZyXEL NSA310b";
-+ compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x10000000>;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ stdout-path = &uart0;
-+ };
-+
-+ ocp@f1000000 {
-+ pinctrl: pin-controller@10000 {
-+ pinctrl-names = "default";
-+
-+ pmx_led_esata_green: pmx-led-esata-green {
-+ marvell,pins = "mpp12";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_led_esata_red: pmx-led-esata-red {
-+ marvell,pins = "mpp13";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_led_usb_green: pmx-led-usb-green {
-+ marvell,pins = "mpp15";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_led_usb_red: pmx-led-usb-red {
-+ marvell,pins = "mpp16";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_led_sys_green: pmx-led-sys-green {
-+ marvell,pins = "mpp28";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_led_sys_red: pmx-led-sys-red {
-+ marvell,pins = "mpp29";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_led_hdd_green: pmx-led-hdd-green {
-+ marvell,pins = "mpp41";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_led_hdd_red: pmx-led-hdd-red {
-+ marvell,pins = "mpp42";
-+ marvell,function = "gpio";
-+ };
-+
-+ };
-+
-+ i2c@11000 {
-+ status = "okay";
-+
-+ lm85: lm85@2e {
-+ compatible = "national,lm85";
-+ reg = <0x2e>;
-+ };
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+
-+ green-sys {
-+ label = "nsa310:green:sys";
-+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-+ };
-+ red-sys {
-+ label = "nsa310:red:sys";
-+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+ };
-+ green-hdd {
-+ label = "nsa310:green:hdd";
-+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
-+ };
-+ red-hdd {
-+ label = "nsa310:red:hdd";
-+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-+ };
-+ green-esata {
-+ label = "nsa310:green:esata";
-+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-+ };
-+ red-esata {
-+ label = "nsa310:red:esata";
-+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-+ };
-+ green-usb {
-+ label = "nsa310:green:usb";
-+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-+ };
-+ red-usb {
-+ label = "nsa310:red:usb";
-+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-+ };
-+ green-copy {
-+ label = "nsa310:green:copy";
-+ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-+ };
-+ red-copy {
-+ label = "nsa310:red:copy";
-+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
diff --git a/target/linux/kirkwood/patches-4.9/108-on100.patch b/target/linux/kirkwood/patches-4.9/108-on100.patch
deleted file mode 100644
index 3cab70aaa8..0000000000
--- a/target/linux/kirkwood/patches-4.9/108-on100.patch
+++ /dev/null
@@ -1,173 +0,0 @@
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-on100.dts
-@@ -0,0 +1,160 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+ model = "Cisco Systems ON100";
-+ compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+ memory {
-+ device_type = "memory";
-+ reg = <0x00000000 0x20000000>;
-+ };
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200n8 earlyprintk";
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ gpio_keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ pinctrl-0 = <&pmx_btn_reset>;
-+ pinctrl-names = "default";
-+
-+ button@1 {
-+ label = "Reset Button";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
-+ pinctrl-names = "default";
-+
-+ health-g {
-+ label = "on100:green:health";
-+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ health-r {
-+ label = "on100:red:health";
-+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ health2-g {
-+ label = "on100:green:health2";
-+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ health2-r {
-+ label = "on100:red:health2";
-+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&eth0 {
-+ status = "okay";
-+
-+ ethernet0-port@0 {
-+ phy-handle = <&ethphy0>;
-+ phy-connection-type = "rgmii-id";
-+ };
-+};
-+
-+&eth1 {
-+ status = "okay";
-+
-+ ethernet1-port@0 {
-+ phy-handle = <&ethphy1>;
-+ phy-connection-type = "rgmii-id";
-+ };
-+};
-+
-+&mdio {
-+ status = "okay";
-+
-+ ethphy0: ethernet-phy@0 {
-+ /* Marvell 88E1121R */
-+ compatible = "ethernet-phy-id0141.0cb0",
-+ "ethernet-phy-ieee802.3-c22";
-+ reg = <0>;
-+ };
-+
-+ ethphy1: ethernet-phy@1 {
-+ /* Marvell 88E1121R */
-+ compatible = "ethernet-phy-id0141.0cb0",
-+ "ethernet-phy-ieee802.3-c22";
-+ reg = <1>;
-+ };
-+};
-+
-+&nand {
-+ status = "okay";
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x00000000 0x000a0000>;
-+ read-only;
-+ };
-+
-+ partition@a0000 {
-+ label = "u-boot environment";
-+ reg = <0x000a0000 0x00020000>;
-+ read-only;
-+ };
-+
-+ partition@c0000 {
-+ label = "kernel";
-+ reg = <0x000c0000 0x00540000>;
-+ };
-+
-+ partition@600000 {
-+ label = "ubi";
-+ reg = <0x00600000 0x1fa00000>;
-+ };
-+};
-+
-+&pinctrl {
-+ pmx_led_health_r: pmx-led-health-r {
-+ marvell,pins = "mpp45";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_led_health_g: pmx-led-health-g {
-+ marvell,pins = "mpp44";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_led_health2_r: pmx-led-health2-r {
-+ marvell,pins = "mpp47";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_led_health2_g: pmx-led-health2-g {
-+ marvell,pins = "mpp46";
-+ marvell,function = "gpio";
-+ };
-+
-+ pmx_btn_reset: pmx-led-reset {
-+ marvell,pins = "mpp31";
-+ marvell,function = "gpio";
-+ };
-+};
-+
-+&sdio {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -241,6 +241,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- kirkwood-nsa310b.dtb \
- kirkwood-nsa320.dtb \
- kirkwood-nsa325.dtb \
-+ kirkwood-on100.dtb \
- kirkwood-openblocks_a6.dtb \
- kirkwood-openblocks_a7.dtb \
- kirkwood-openrd-base.dtb \
diff --git a/target/linux/kirkwood/patches-4.9/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.9/109-pogoplug_v4.patch
deleted file mode 100644
index dff1966d5c..0000000000
--- a/target/linux/kirkwood/patches-4.9/109-pogoplug_v4.patch
+++ /dev/null
@@ -1,59 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
-+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
-@@ -23,6 +23,7 @@
- };
-
- chosen {
-+ bootargs = "console=ttyS0,115200";
- stdout-path = "uart0:115200n8";
- };
-
-@@ -36,8 +37,8 @@
- eject {
- debounce_interval = <50>;
- wakeup-source;
-- linux,code = <KEY_EJECTCD>;
-- label = "Eject Button";
-+ linux,code = <KEY_RESTART>;
-+ label = "Reset";
- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- };
- };
-@@ -136,29 +137,19 @@
- #size-cells = <1>;
-
- partition@0 {
-- label = "u-boot";
-- reg = <0x00000000 0x200000>;
-+ label = "uboot";
-+ reg = <0x00000000 0x1c0000>;
- read-only;
- };
-
-- partition@200000 {
-- label = "uImage";
-- reg = <0x00200000 0x300000>;
-- };
--
-- partition@500000 {
-- label = "uImage2";
-- reg = <0x00500000 0x300000>;
-+ partition@1c0000 {
-+ label = "uboot_env";
-+ reg = <0x001c0000 0x40000>;
- };
-
-- partition@800000 {
-- label = "failsafe";
-- reg = <0x00800000 0x800000>;
-- };
--
-- partition@1000000 {
-- label = "root";
-- reg = <0x01000000 0x7000000>;
-+ partition@200000 {
-+ label = "ubi";
-+ reg = <0x00200000 0x7e00000>;
- };
- };
- };
diff --git a/target/linux/kirkwood/patches-4.9/200-disable-tso.patch b/target/linux/kirkwood/patches-4.9/200-disable-tso.patch
deleted file mode 100644
index cde53d0218..0000000000
--- a/target/linux/kirkwood/patches-4.9/200-disable-tso.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Subject: [PATCH] net: mv643xx_eth: Make TSO disabled by default
-
-Data corruption has been observed to be produced by TSO. For instance,
-accessing files on a NFS-server with TSO enabled results in different data
-transferred each time.
-
-This has been observed only on Kirkwood platforms, i.e. with the mv643xx_eth
-driver. Same tests on platforms using the mvneta ethernet driver have
-passed without errors.
-
-Make TSO disabled by default for now, until we can found a proper fix
-for the regression.
-
-Fixes: 3ae8f4e0b98 ('net: mv643xx_eth: Implement software TSO')
-Reported-by: Slawomir Gajzner <slawomir.gajzner <at> gmail.com>
-Reported-by: Julien D'Ascenzio <jdascenzio <at> yahoo.fr>
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia <at> free-electrons.com>
----
---- a/drivers/net/ethernet/marvell/mv643xx_eth.c
-+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
-@@ -3197,11 +3197,11 @@ static int mv643xx_eth_probe(struct plat
- dev->watchdog_timeo = 2 * HZ;
- dev->base_addr = 0;
-
-- dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
-+ dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
- dev->vlan_features = dev->features;
-
- dev->features |= NETIF_F_RXCSUM;
-- dev->hw_features = dev->features;
-+ dev->hw_features = dev->features | NETIF_F_TSO;
-
- dev->priv_flags |= IFF_UNICAST_FLT;
- dev->gso_max_segs = MV643XX_MAX_TSO_SEGS;
diff --git a/target/linux/kirkwood/patches-4.9/201-enable-sata-port-specific-led-triggers.patch b/target/linux/kirkwood/patches-4.9/201-enable-sata-port-specific-led-triggers.patch
deleted file mode 100644
index 202c9c02e6..0000000000
--- a/target/linux/kirkwood/patches-4.9/201-enable-sata-port-specific-led-triggers.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/mach-mvebu/Kconfig
-+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -117,6 +117,7 @@ config MACH_DOVE
- config MACH_KIRKWOOD
- bool "Marvell Kirkwood boards"
- depends on ARCH_MULTI_V5
-+ select ARCH_WANT_LIBATA_LEDS
- select CPU_FEROCEON
- select GPIOLIB
- select KIRKWOOD_CLK
diff --git a/target/linux/kirkwood/patches-4.9/202-linksys-find-active-root.patch b/target/linux/kirkwood/patches-4.9/202-linksys-find-active-root.patch
deleted file mode 100644
index f4156be4d1..0000000000
--- a/target/linux/kirkwood/patches-4.9/202-linksys-find-active-root.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d
- return of_get_property(pp, "compatible", NULL);
- }
-
-+static int mangled_rootblock;
-+
- static int parse_fixed_partitions(struct mtd_info *master,
- const struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
-@@ -32,6 +34,7 @@ static int parse_fixed_partitions(struct
- struct mtd_partition *parts;
- struct device_node *mtd_node;
- struct device_node *ofpart_node;
-+ const char *owrtpart = "ubi";
- const char *partname;
- struct device_node *pp;
- int nr_parts, i, ret = 0;
-@@ -110,9 +113,15 @@ static int parse_fixed_partitions(struct
- parts[i].size = of_read_number(reg + a_cells, s_cells);
- parts[i].of_node = pp;
-
-- partname = of_get_property(pp, "label", &len);
-- if (!partname)
-- partname = of_get_property(pp, "name", &len);
-+ if (mangled_rootblock && (i == mangled_rootblock)) {
-+ partname = owrtpart;
-+ } else {
-+ partname = of_get_property(pp, "label", &len);
-+
-+ if (!partname)
-+ partname = of_get_property(pp, "name", &len);
-+ }
-+
- parts[i].name = partname;
-
- if (of_get_property(pp, "read-only", &len))
-@@ -220,6 +229,18 @@ static int __init ofpart_parser_init(voi
- return 0;
- }
-
-+static int __init active_root(char *str)
-+{
-+ get_option(&str, &mangled_rootblock);
-+
-+ if (!mangled_rootblock)
-+ return 1;
-+
-+ return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- deregister_mtd_parser(&ofpart_parser);