aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/generic/pending-4.19/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch55
-rw-r--r--target/linux/generic/pending-4.19/757-net-sfp-rename-sm_retries.patch60
-rw-r--r--target/linux/generic/pending-4.19/758-net-sfp-error-handling-for-phy-probe.patch97
-rw-r--r--target/linux/generic/pending-4.19/759-net-sfp-re-attempt-probing-for-phy.patch132
4 files changed, 344 insertions, 0 deletions
diff --git a/target/linux/generic/pending-4.19/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch b/target/linux/generic/pending-4.19/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch
new file mode 100644
index 0000000000..0e5005ed19
--- /dev/null
+++ b/target/linux/generic/pending-4.19/756-net-sfp-use-a-definition-for-the-fault-recovery-atte.patch
@@ -0,0 +1,55 @@
+From 4d6bfb6fbb00af38402db4d1ce464e22def9fd9e Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Thu, 28 Nov 2019 14:24:40 +0000
+Subject: [PATCH 1/4] net: sfp: use a definition for the fault recovery
+ attempts
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 14 +++++++++++---
+ 1 file changed, 11 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -160,6 +160,14 @@ static const enum gpiod_flags gpio_flags
+ #define T_RESET_US 10
+ #define T_FAULT_RECOVER msecs_to_jiffies(1000)
+
++/* N_FAULT_INIT is the number of recovery attempts at module initialisation
++ * time. If the TX_FAULT signal is not deasserted after this number of
++ * attempts at clearing it, we decide that the module is faulty.
++ * N_FAULT is the same but after the module has initialised.
++ */
++#define N_FAULT_INIT 5
++#define N_FAULT 5
++
+ /* SFP module presence detection is poor: the three MOD DEF signals are
+ * the same length on the PCB, which means it's possible for MOD DEF 0 to
+ * connect before the I2C bus on MOD DEF 1/2.
+@@ -1803,7 +1811,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ sfp_module_tx_enable(sfp);
+
+ /* Initialise the fault clearance retries */
+- sfp->sm_retries = 5;
++ sfp->sm_retries = N_FAULT_INIT;
+
+ /* We need to check the TX_FAULT state, which is not defined
+ * while TX_DISABLE is asserted. The earliest we want to do
+@@ -1842,7 +1850,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ * there is a fault.
+ */
+ sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
+- sfp->sm_retries == 5);
++ sfp->sm_retries == N_FAULT_INIT);
+ } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
+ init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
+ * clear. Probe for the PHY and check the LOS state.
+@@ -1855,7 +1863,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ sfp_sm_link_check_los(sfp);
+
+ /* Reset the fault retry count */
+- sfp->sm_retries = 5;
++ sfp->sm_retries = N_FAULT;
+ }
+ break;
+
diff --git a/target/linux/generic/pending-4.19/757-net-sfp-rename-sm_retries.patch b/target/linux/generic/pending-4.19/757-net-sfp-rename-sm_retries.patch
new file mode 100644
index 0000000000..b347d2c90a
--- /dev/null
+++ b/target/linux/generic/pending-4.19/757-net-sfp-rename-sm_retries.patch
@@ -0,0 +1,60 @@
+From bfa3cbb01c7ea34d7369c9bd2ec1b2dc67082b04 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Mon, 2 Dec 2019 18:06:44 +0000
+Subject: [PATCH 2/4] net: sfp: rename sm_retries
+
+Rename sm_retries as sm_fault_retries, as this is what this member is
+tracking.
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -222,7 +222,7 @@ struct sfp {
+ unsigned char sm_mod_tries;
+ unsigned char sm_dev_state;
+ unsigned short sm_state;
+- unsigned int sm_retries;
++ unsigned char sm_fault_retries;
+
+ struct sfp_eeprom_id id;
+ unsigned int module_power_mW;
+@@ -1414,7 +1414,7 @@ static bool sfp_los_event_inactive(struc
+
+ static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn)
+ {
+- if (sfp->sm_retries && !--sfp->sm_retries) {
++ if (sfp->sm_fault_retries && !--sfp->sm_fault_retries) {
+ dev_err(sfp->dev,
+ "module persistently indicates fault, disabling\n");
+ sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
+@@ -1811,7 +1811,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ sfp_module_tx_enable(sfp);
+
+ /* Initialise the fault clearance retries */
+- sfp->sm_retries = N_FAULT_INIT;
++ sfp->sm_fault_retries = N_FAULT_INIT;
+
+ /* We need to check the TX_FAULT state, which is not defined
+ * while TX_DISABLE is asserted. The earliest we want to do
+@@ -1850,7 +1850,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ * there is a fault.
+ */
+ sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
+- sfp->sm_retries == N_FAULT_INIT);
++ sfp->sm_fault_retries == N_FAULT_INIT);
+ } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
+ init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
+ * clear. Probe for the PHY and check the LOS state.
+@@ -1863,7 +1863,7 @@ static void sfp_sm_main(struct sfp *sfp,
+ sfp_sm_link_check_los(sfp);
+
+ /* Reset the fault retry count */
+- sfp->sm_retries = N_FAULT;
++ sfp->sm_fault_retries = N_FAULT;
+ }
+ break;
+
diff --git a/target/linux/generic/pending-4.19/758-net-sfp-error-handling-for-phy-probe.patch b/target/linux/generic/pending-4.19/758-net-sfp-error-handling-for-phy-probe.patch
new file mode 100644
index 0000000000..00896dfa26
--- /dev/null
+++ b/target/linux/generic/pending-4.19/758-net-sfp-error-handling-for-phy-probe.patch
@@ -0,0 +1,97 @@
+From 1fba543dc8edf4a43bff3276306648bb27c1e207 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Fri, 29 Nov 2019 00:30:08 +0000
+Subject: [PATCH 3/4] net: sfp: error handling for phy probe
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 26 +++++++++++++++++---------
+ 1 file changed, 17 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -1334,7 +1334,7 @@ static void sfp_sm_phy_detach(struct sfp
+ sfp->mod_phy = NULL;
+ }
+
+-static void sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
++static int sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
+ {
+ struct phy_device *phy;
+ int err;
+@@ -1342,18 +1342,18 @@ static void sfp_sm_probe_phy(struct sfp
+ phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
+ if (phy == ERR_PTR(-ENODEV)) {
+ dev_info(sfp->dev, "no PHY detected\n");
+- return;
++ return 0;
+ }
+ if (IS_ERR(phy)) {
+ dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
+- return;
++ return PTR_ERR(phy);
+ }
+
+ err = phy_device_register(phy);
+ if (err) {
+ phy_device_free(phy);
+ dev_err(sfp->dev, "phy_device_register failed: %d\n", err);
+- return;
++ return err;
+ }
+
+ err = sfp_add_phy(sfp->sfp_bus, phy);
+@@ -1361,10 +1361,12 @@ static void sfp_sm_probe_phy(struct sfp
+ phy_device_remove(phy);
+ phy_device_free(phy);
+ dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err);
+- return;
++ return err;
+ }
+
+ sfp->mod_phy = phy;
++
++ return 0;
+ }
+
+ static void sfp_sm_link_up(struct sfp *sfp)
+@@ -1437,21 +1439,24 @@ static void sfp_sm_fault(struct sfp *sfp
+ * Clause 45 copper SFP+ modules (10G) appear to switch their interface
+ * mode according to the negotiated line speed.
+ */
+-static void sfp_sm_probe_for_phy(struct sfp *sfp)
++static int sfp_sm_probe_for_phy(struct sfp *sfp)
+ {
++ int err = 0;
++
+ switch (sfp->id.base.extended_cc) {
+ case SFF8024_ECC_10GBASE_T_SFI:
+ case SFF8024_ECC_10GBASE_T_SR:
+ case SFF8024_ECC_5GBASE_T:
+ case SFF8024_ECC_2_5GBASE_T:
+- sfp_sm_probe_phy(sfp, true);
++ err = sfp_sm_probe_phy(sfp, true);
+ break;
+
+ default:
+ if (sfp->id.base.e1000_base_t)
+- sfp_sm_probe_phy(sfp, false);
++ err = sfp_sm_probe_phy(sfp, false);
+ break;
+ }
++ return err;
+ }
+
+ static int sfp_module_parse_power(struct sfp *sfp)
+@@ -1855,7 +1860,10 @@ static void sfp_sm_main(struct sfp *sfp,
+ init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
+ * clear. Probe for the PHY and check the LOS state.
+ */
+- sfp_sm_probe_for_phy(sfp);
++ if (sfp_sm_probe_for_phy(sfp)) {
++ sfp_sm_next(sfp, SFP_S_FAIL, 0);
++ break;
++ }
+ if (sfp_module_start(sfp->sfp_bus)) {
+ sfp_sm_next(sfp, SFP_S_FAIL, 0);
+ break;
diff --git a/target/linux/generic/pending-4.19/759-net-sfp-re-attempt-probing-for-phy.patch b/target/linux/generic/pending-4.19/759-net-sfp-re-attempt-probing-for-phy.patch
new file mode 100644
index 0000000000..526c7962cc
--- /dev/null
+++ b/target/linux/generic/pending-4.19/759-net-sfp-re-attempt-probing-for-phy.patch
@@ -0,0 +1,132 @@
+From 6c4efe83a0acf6f06c89ae17b885fa5739eb5be7 Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@armlinux.org.uk>
+Date: Mon, 2 Dec 2019 18:20:22 +0000
+Subject: [PATCH 4/4] net: sfp: re-attempt probing for phy
+
+Some 1000BASE-T PHY modules take a while for the PHY to wake up.
+Retry the probe a number of times before deciding that the module has
+no PHY.
+
+Tested with:
+ Sourcephotonics SPGBTXCNFC - PHY takes less than 50ms to respond.
+ Champion One 1000SFPT - PHY takes about 200ms to respond.
+ Mikrotik S-RJ01 - no PHY
+
+Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
+---
+ drivers/net/phy/sfp.c | 59 ++++++++++++++++++++++++++++++++++++---------------
+ 1 file changed, 42 insertions(+), 17 deletions(-)
+
+--- a/drivers/net/phy/sfp.c
++++ b/drivers/net/phy/sfp.c
+@@ -60,6 +60,7 @@ enum {
+ SFP_S_FAIL,
+ SFP_S_WAIT,
+ SFP_S_INIT,
++ SFP_S_INIT_PHY,
+ SFP_S_INIT_TX_FAULT,
+ SFP_S_WAIT_LOS,
+ SFP_S_LINK_UP,
+@@ -124,6 +125,7 @@ static const char * const sm_state_strin
+ [SFP_S_FAIL] = "fail",
+ [SFP_S_WAIT] = "wait",
+ [SFP_S_INIT] = "init",
++ [SFP_S_INIT_PHY] = "init_phy",
+ [SFP_S_INIT_TX_FAULT] = "init_tx_fault",
+ [SFP_S_WAIT_LOS] = "wait_los",
+ [SFP_S_LINK_UP] = "link_up",
+@@ -168,6 +170,12 @@ static const enum gpiod_flags gpio_flags
+ #define N_FAULT_INIT 5
+ #define N_FAULT 5
+
++/* T_PHY_RETRY is the time interval between attempts to probe the PHY.
++ * R_PHY_RETRY is the number of attempts.
++ */
++#define T_PHY_RETRY msecs_to_jiffies(50)
++#define R_PHY_RETRY 12
++
+ /* SFP module presence detection is poor: the three MOD DEF signals are
+ * the same length on the PCB, which means it's possible for MOD DEF 0 to
+ * connect before the I2C bus on MOD DEF 1/2.
+@@ -223,6 +231,7 @@ struct sfp {
+ unsigned char sm_dev_state;
+ unsigned short sm_state;
+ unsigned char sm_fault_retries;
++ unsigned char sm_phy_retries;
+
+ struct sfp_eeprom_id id;
+ unsigned int module_power_mW;
+@@ -1340,10 +1349,8 @@ static int sfp_sm_probe_phy(struct sfp *
+ int err;
+
+ phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
+- if (phy == ERR_PTR(-ENODEV)) {
+- dev_info(sfp->dev, "no PHY detected\n");
+- return 0;
+- }
++ if (phy == ERR_PTR(-ENODEV))
++ return PTR_ERR(phy);
+ if (IS_ERR(phy)) {
+ dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
+ return PTR_ERR(phy);
+@@ -1785,6 +1792,7 @@ static void sfp_sm_module(struct sfp *sf
+ static void sfp_sm_main(struct sfp *sfp, unsigned int event)
+ {
+ unsigned long timeout;
++ int ret;
+
+ /* Some events are global */
+ if (sfp->sm_state != SFP_S_DOWN &&
+@@ -1857,22 +1865,39 @@ static void sfp_sm_main(struct sfp *sfp,
+ sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
+ sfp->sm_fault_retries == N_FAULT_INIT);
+ } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
+- init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
+- * clear. Probe for the PHY and check the LOS state.
+- */
+- if (sfp_sm_probe_for_phy(sfp)) {
+- sfp_sm_next(sfp, SFP_S_FAIL, 0);
+- break;
+- }
+- if (sfp_module_start(sfp->sfp_bus)) {
+- sfp_sm_next(sfp, SFP_S_FAIL, 0);
++ init_done:
++ sfp->sm_phy_retries = R_PHY_RETRY;
++ goto phy_probe;
++ }
++ break;
++
++ case SFP_S_INIT_PHY:
++ if (event != SFP_E_TIMEOUT)
++ break;
++ phy_probe:
++ /* TX_FAULT deasserted or we timed out with TX_FAULT
++ * clear. Probe for the PHY and check the LOS state.
++ */
++ ret = sfp_sm_probe_for_phy(sfp);
++ if (ret == -ENODEV) {
++ if (--sfp->sm_phy_retries) {
++ sfp_sm_next(sfp, SFP_S_INIT_PHY, T_PHY_RETRY);
+ break;
++ } else {
++ dev_info(sfp->dev, "no PHY detected\n");
+ }
+- sfp_sm_link_check_los(sfp);
+-
+- /* Reset the fault retry count */
+- sfp->sm_fault_retries = N_FAULT;
++ } else if (ret) {
++ sfp_sm_next(sfp, SFP_S_FAIL, 0);
++ break;
+ }
++ if (sfp_module_start(sfp->sfp_bus)) {
++ sfp_sm_next(sfp, SFP_S_FAIL, 0);
++ break;
++ }
++ sfp_sm_link_check_los(sfp);
++
++ /* Reset the fault retry count */
++ sfp->sm_fault_retries = N_FAULT;
+ break;
+
+ case SFP_S_INIT_TX_FAULT: