aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh9
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rw-r--r--target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.41
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt8
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c171
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/image/generic.mk21
12 files changed, 218 insertions, 4 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 1708abf53c..16135a36a6 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -57,6 +57,10 @@ ap147-010)
ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
;;
+bhr-4grv2)
+ ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1"
+ ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
+ ;;
bsb)
ucidef_set_led_default "sys" "SYS" "$board:red:sys" "1"
;;
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 24dfced4ae..df87c96a3f 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -164,6 +164,7 @@ ar71xx_setup_interfaces()
;;
ap135-020|\
ap136-020|\
+ bhr-4grv2|\
tew-823dru|\
tl-wr1043nd-v2|\
wzr-450hp2)
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 881b3c65e5..bfd619a211 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -53,6 +53,11 @@ get_status_led() {
aw-nr580)
status_led="$board:green:ready"
;;
+ bhr-4grv2|\
+ wzr-hp-ag300h|\
+ wzr-hp-g300nh2)
+ status_led="buffalo:red:diag"
+ ;;
bsb)
status_led="$board:red:sys"
;;
@@ -393,10 +398,6 @@ get_status_led() {
wlae-ag300n)
status_led="buffalo:green:status"
;;
- wzr-hp-ag300h|\
- wzr-hp-g300nh2)
- status_led="buffalo:red:diag"
- ;;
r6100|\
wndap360|\
wndr3700|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 75542470ba..9495bf449a 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -482,6 +482,9 @@ ar71xx_board_detect() {
*AW-NR580)
name="aw-nr580"
;;
+ *BHR-4GRV2)
+ name="bhr-4grv2"
+ ;;
*CAP324)
name="cap324"
;;
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
index c4177e1099..e2a70b82dd 100644
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
+++ b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
@@ -16,6 +16,7 @@ set_preinit_iface() {
ap83 |\
archer-c5 |\
archer-c7 |\
+ bhr-4grv2 |\
dir-505-a1 |\
gl-inet |\
jwap003 |\
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index c4a9f8a9f1..2358c58c8f 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -263,6 +263,7 @@ platform_check_image() {
ap152|\
ap96|\
arduino-yun|\
+ bhr-4grv2|\
bxu2000n-2-a1|\
db120|\
dr344|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 4fe80f015c..aa20f9b238 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -53,6 +53,7 @@ CONFIG_ATH79_MACH_AP96=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y
+CONFIG_ATH79_MACH_BHR_4GRV2=y
CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
CONFIG_ATH79_MACH_BSB=y
CONFIG_ATH79_MACH_C55=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index db3b9bd076..ac8255b8a3 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -271,6 +271,14 @@ config ATH79_MACH_SOM9331
select ATH79_DEV_USB
select ATH79_DEV_WMAC
+config ATH79_MACH_BHR_4GRV2
+ bool "Buffalo BHR-4GRV2 board support"
+ select SOC_QCA955X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+
config ATH79_MACH_WHR_HP_G300N
bool "Buffalo WHR-HP-G300N board support"
select SOC_AR724X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 580d2e249f..78e242a6fb 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
+obj-$(CONFIG_ATH79_MACH_BHR_4GRV2) += mach-bhr-4grv2.o
obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A) += mach-bhu-bxu2000n2-a.o
obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o
obj-$(CONFIG_ATH79_MACH_C55) += mach-c55.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c
new file mode 100644
index 0000000000..5b4cf5ff2f
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c
@@ -0,0 +1,171 @@
+/*
+ * Buffalo BHR-4GRV2 board support
+ *
+ * Copyright (c) 2012 Qualcomm Atheros
+ * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com>
+ *
+ * Based on mach-ap136.c and mach-wzr-450hp2.c
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define BHR_4GRV2_GPIO_LED_VPN_RED 3
+#define BHR_4GRV2_GPIO_LED_VPN_GREEN 18
+#define BHR_4GRV2_GPIO_LED_POWER_GREEN 19
+#define BHR_4GRV2_GPIO_LED_DIAG_RED 20
+
+#define BHR_4GRV2_GPIO_BTN_RESET 17
+#define BHR_4GRV2_GPIO_BTN_ECO 21
+
+#define BHR_4GRV2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL (3 * BHR_4GRV2_KEYS_POLL_INTERVAL)
+#define BHR_4GRV2_MAC0_OFFSET 0
+#define BHR_4GRV2_MAC1_OFFSET 6
+
+static struct gpio_led bhr_4grv2_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:red:vpn",
+ .gpio = BHR_4GRV2_GPIO_LED_VPN_RED,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:vpn",
+ .gpio = BHR_4GRV2_GPIO_LED_VPN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:green:power",
+ .gpio = BHR_4GRV2_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:red:diag",
+ .gpio = BHR_4GRV2_GPIO_LED_DIAG_RED,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button bhr_4grv2_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = BHR_4GRV2_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "ECO button",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = BHR_4GRV2_GPIO_BTN_ECO,
+ .active_low = 1,
+ },
+};
+
+/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
+static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad0_cfg = {
+ .mode = AR8327_PAD_MAC_SGMII,
+ .sgmii_delay_en = true,
+};
+
+/* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
+static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad6_cfg = {
+ .mode = AR8327_PAD_MAC_RGMII,
+ .txclk_delay_en = true,
+ .rxclk_delay_en = true,
+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data bhr_4grv2_ar8327_data = {
+ .pad0_cfg = &bhr_4grv2_ar8327_pad0_cfg,
+ .pad6_cfg = &bhr_4grv2_ar8327_pad6_cfg,
+ .port0_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+ .port6_cfg = {
+ .force_link = 1,
+ .speed = AR8327_PORT_SPEED_1000,
+ .duplex = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ },
+};
+
+static struct mdio_board_info bhr_4grv2_mdio0_info[] = {
+ {
+ .bus_id = "ag71xx-mdio.0",
+ .phy_addr = 0,
+ .platform_data = &bhr_4grv2_ar8327_data,
+ },
+};
+
+static void __init bhr_4grv2_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(bhr_4grv2_leds_gpio),
+ bhr_4grv2_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, BHR_4GRV2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(bhr_4grv2_gpio_keys),
+ bhr_4grv2_gpio_keys);
+
+ mdiobus_register_board_info(bhr_4grv2_mdio0_info,
+ ARRAY_SIZE(bhr_4grv2_mdio0_info));
+ ath79_register_mdio(0, 0x0);
+
+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
+
+ /* GMAC0 is connected to the RGMII interface */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+ ath79_eth0_pll_data.pll_1000 = 0x56000000;
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, art + BHR_4GRV2_MAC0_OFFSET, 0);
+ ath79_register_eth(0);
+
+ /* GMAC1 is connected to the SGMII interface */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
+
+ ath79_init_mac(ath79_eth1_data.mac_addr, art + BHR_4GRV2_MAC1_OFFSET, 0);
+ ath79_register_eth(1);
+}
+
+MIPS_MACHINE(ATH79_MACH_BHR_4GRV2, "BHR-4GRV2",
+ "Buffalo BHR-4GRV2", bhr_4grv2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 3ebcbc0de5..dec3d6014b 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -44,6 +44,7 @@ enum ath79_mach_type {
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
ATH79_MACH_ARDUINO_YUN, /* Yun */
ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
+ ATH79_MACH_BHR_4GRV2, /* Buffalo BHR-4GRV2 */
ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
ATH79_MACH_BSB, /* Smart Electronics Black Swift board */
ATH79_MACH_C55, /* AirTight Networks C-55 */
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index ae0c7fcae1..d6142c1a5c 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -626,3 +626,24 @@ define Device/dap-2695-a1
endef
TARGET_DEVICES += dap-2695-a1
+
+define Build/mkbuffaloimg
+ $(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
+ -R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
+ -K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \
+ -i $@ -o $@.new
+ mv $@.new $@
+endef
+
+define Device/bhr-4grv2
+ DEVICE_TITLE := Buffalo BHR-4GRV2
+ BOARDNAME := BHR-4GRV2
+ ROOTFS_SIZE := 14528k
+ KERNEL_SIZE := 1472k
+ IMAGE_SIZE := 16000k
+ MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin = append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | mkbuffaloimg
+endef
+TARGET_DEVICES += bhr-4grv2