diff options
Diffstat (limited to 'target')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 5 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 2 | ||||
| -rw-r--r-- | target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom | 1 | ||||
| -rw-r--r-- | target/linux/ramips/dts/DWR-922-E2.dts | 154 | ||||
| -rw-r--r-- | target/linux/ramips/image/mt7620.mk | 16 |
5 files changed, 177 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 2e62073d3f..35a28174cc 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -124,9 +124,12 @@ dlink,dwr-118-a2) ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" set_wifi_led "$boardname:green:wlan2g" "wlan1" ;; -dlink,dwr-921-c1) +dlink,dwr-921-c1|\ +dlink,dwr-922-e2) set_wifi_led "$boardname:green:wifi" ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f" + ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link" + ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx" ;; dir-860l-b1) ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 797490aed4..f958ac2bd0 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -90,6 +90,7 @@ ramips_setup_interfaces() dir-810l|\ dlink,dwr-116-a1|\ dlink,dwr-921-c1|\ + dlink,dwr-922-e2|\ ew1200|\ firewrt|\ hc5661a|\ @@ -488,6 +489,7 @@ ramips_setup_macs() dlink,dwr-118-a1|\ dlink,dwr-118-a2|\ dlink,dwr-921-c1|\ + dlink,dwr-922-e2|\ lava,lr-25g001) wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000) lan_mac=$(macaddr_add "$wan_mac" 1) diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 1d9de2d503..13a4687251 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -58,6 +58,7 @@ case "$FIRMWARE" in dlink,dwr-118-a1|\ dlink,dwr-118-a2|\ dlink,dwr-921-c1|\ + dlink,dwr-922-e2|\ lava,lr-25g001) wan_mac=$(jboot_config_read -m -i $(find_mtd_part "config") -o 0xE000) wifi_mac=$(macaddr_add "$wan_mac" 1) diff --git a/target/linux/ramips/dts/DWR-922-E2.dts b/target/linux/ramips/dts/DWR-922-E2.dts new file mode 100644 index 0000000000..c2dd26a09d --- /dev/null +++ b/target/linux/ramips/dts/DWR-922-E2.dts @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620n.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "dlink,dwr-922-e2", "ralink,mt7620n-soc"; + model = "D-Link DWR-922 E2"; + + aliases { + led-boot = &sstrengthg; + led-failsafe = &sstrengthg; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + leds { + compatible = "gpio-leds"; + led-boot = &sstrengthg; + + sms { + label = "dwr-922-e2:green:sms"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "dwr-922-e2:green:lan"; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + + sstrengthg: sstrengthg { + label = "dwr-922-e2:green:sigstrength"; + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + }; + + sstrengthr { + label = "dwr-922-e2:red:sigstrength"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + }; + + 4g { + label = "dwr-922-e2:green:4g"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + }; + + 3g { + label = "dwr-922-e2:green:3g"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + }; + + wifi { + label = "dwr-922-e2:green:wifi"; + gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + lte_modem_enable { + gpio-export,name = "lte_modem_enable"; + gpio-export,output = <1>; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "jboot"; + reg = <0x0 0x10000>; + read-only; + }; + + partition@10000 { + compatible = "amit,jimage"; + label = "firmware"; + reg = <0x10000 0xfe0000>; + }; + + config: partition@ff0000 { + label = "config"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +ðernet { + port@4 { + status = "okay"; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "spi refclk", "i2c", "ephy", "wled"; + ralink,function = "gpio"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 2f733b2ed9..6b65856281 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -228,6 +228,22 @@ define Device/dlink_dwr-921-c3 endef TARGET_DEVICES += dlink_dwr-921-c3 +define Device/dlink_dwr-922-e2 + DTS := DWR-922-E2 + IMAGE_SIZE := $(ralink_default_fw_size_16M) + DEVICE_TITLE := D-Link DWR-922 E2 + DLINK_ROM_ID := DLK6E2414005 + DLINK_FAMILY_MEMBER := 0x6E24 + DLINK_FIRMWARE_SIZE := 0xFE0000 + KERNEL := $(KERNEL_DTB) + IMAGES += factory.bin + IMAGE/sysupgrade.bin := mkdlinkfw | pad-rootfs | append-metadata + IMAGE/factory.bin := mkdlinkfw | pad-rootfs | mkdlinkfw-factory + DEVICE_PACKAGES := jboot-tools \ + kmod-usb2 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi +endef +TARGET_DEVICES += dlink_dwr-922-e2 + define Device/e1700 DTS := E1700 IMAGES += factory.bin |