aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/ipq806x/patches-4.9/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch95
-rw-r--r--target/linux/ipq806x/patches-4.9/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch85
-rw-r--r--target/linux/ipq806x/patches-4.9/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch127
-rw-r--r--target/linux/ipq806x/patches-4.9/0071-4-PCIE-designware-Fixed-PCI-host-init.patch68
-rw-r--r--target/linux/ipq806x/patches-4.9/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch113
-rw-r--r--target/linux/ipq806x/patches-4.9/0071-6-PCI-qcom-Force-GEN1-support.patch61
-rw-r--r--target/linux/ipq806x/patches-4.9/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch69
-rw-r--r--target/linux/ipq806x/patches-4.9/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch91
-rw-r--r--target/linux/ipq806x/patches-4.9/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch25
-rw-r--r--target/linux/ipq806x/patches-4.9/0071-pcie-qcom-fixes.patch308
10 files changed, 734 insertions, 308 deletions
diff --git a/target/linux/ipq806x/patches-4.9/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch b/target/linux/ipq806x/patches-4.9/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch
new file mode 100644
index 0000000000..7a315627f3
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch
@@ -0,0 +1,95 @@
+From 86655aa14304ca88a8ce8847276147dbc1a83238 Mon Sep 17 00:00:00 2001
+From: Sham Muthayyan <smuthayy@codeaurora.org>
+Date: Tue, 19 Jul 2016 18:44:49 +0530
+Subject: PCI: qcom: Fixed IPQ806x specific clocks
+
+Change-Id: I488e1bc707d6a22b37a338f41935e3922009ba5e
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 38 +++++++++++++++++++++++++++++++++-----
+ 1 file changed, 33 insertions(+), 5 deletions(-)
+
+--- a/drivers/pci/host/pcie-qcom.c
++++ b/drivers/pci/host/pcie-qcom.c
+@@ -53,6 +53,8 @@ struct qcom_pcie_resources_v0 {
+ struct clk *iface_clk;
+ struct clk *core_clk;
+ struct clk *phy_clk;
++ struct clk *aux_clk;
++ struct clk *ref_clk;
+ struct reset_control *pci_reset;
+ struct reset_control *axi_reset;
+ struct reset_control *ahb_reset;
+@@ -160,6 +162,14 @@ static int qcom_pcie_get_resources_v0(st
+ if (IS_ERR(res->phy_clk))
+ return PTR_ERR(res->phy_clk);
+
++ res->aux_clk = devm_clk_get(dev, "aux");
++ if (IS_ERR(res->aux_clk))
++ return PTR_ERR(res->aux_clk);
++
++ res->ref_clk = devm_clk_get(dev, "ref");
++ if (IS_ERR(res->ref_clk))
++ return PTR_ERR(res->ref_clk);
++
+ res->pci_reset = devm_reset_control_get(dev, "pci");
+ if (IS_ERR(res->pci_reset))
+ return PTR_ERR(res->pci_reset);
+@@ -227,6 +237,8 @@ static void qcom_pcie_deinit_v0(struct q
+ clk_disable_unprepare(res->iface_clk);
+ clk_disable_unprepare(res->core_clk);
+ clk_disable_unprepare(res->phy_clk);
++ clk_disable_unprepare(res->aux_clk);
++ clk_disable_unprepare(res->ref_clk);
+ regulator_disable(res->vdda);
+ regulator_disable(res->vdda_phy);
+ regulator_disable(res->vdda_refclk);
+@@ -269,16 +281,28 @@ static int qcom_pcie_init_v0(struct qcom
+ goto err_assert_ahb;
+ }
+
++ ret = clk_prepare_enable(res->core_clk);
++ if (ret) {
++ dev_err(dev, "cannot prepare/enable core clock\n");
++ goto err_clk_core;
++ }
++
+ ret = clk_prepare_enable(res->phy_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable phy clock\n");
+ goto err_clk_phy;
+ }
+
+- ret = clk_prepare_enable(res->core_clk);
++ ret = clk_prepare_enable(res->aux_clk);
+ if (ret) {
+- dev_err(dev, "cannot prepare/enable core clock\n");
+- goto err_clk_core;
++ dev_err(dev, "cannot prepare/enable aux clock\n");
++ goto err_clk_aux;
++ }
++
++ ret = clk_prepare_enable(res->ref_clk);
++ if (ret) {
++ dev_err(dev, "cannot prepare/enable ref clock\n");
++ goto err_clk_ref;
+ }
+
+ ret = reset_control_deassert(res->ahb_reset);
+@@ -327,10 +351,14 @@ static int qcom_pcie_init_v0(struct qcom
+ return 0;
+
+ err_deassert_ahb:
+- clk_disable_unprepare(res->core_clk);
+-err_clk_core:
++ clk_disable_unprepare(res->ref_clk);
++err_clk_ref:
++ clk_disable_unprepare(res->aux_clk);
++err_clk_aux:
+ clk_disable_unprepare(res->phy_clk);
+ err_clk_phy:
++ clk_disable_unprepare(res->core_clk);
++err_clk_core:
+ clk_disable_unprepare(res->iface_clk);
+ err_assert_ahb:
+ regulator_disable(res->vdda_phy);
diff --git a/target/linux/ipq806x/patches-4.9/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch b/target/linux/ipq806x/patches-4.9/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch
new file mode 100644
index 0000000000..aab4f364e6
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch
@@ -0,0 +1,85 @@
+From 490d103232287eb51c92c49a4ef8865fd0a9d59e Mon Sep 17 00:00:00 2001
+From: Sham Muthayyan <smuthayy@codeaurora.org>
+Date: Tue, 19 Jul 2016 18:58:18 +0530
+Subject: PCI: qcom: Fixed IPQ806x PCIE reset changes
+
+Change-Id: Ia6590e960b9754b1e8b7a51f318788cd63e9e321
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 24 +++++++++++++++++++-----
+ 1 file changed, 19 insertions(+), 5 deletions(-)
+
+--- a/drivers/pci/host/pcie-qcom.c
++++ b/drivers/pci/host/pcie-qcom.c
+@@ -60,6 +60,7 @@ struct qcom_pcie_resources_v0 {
+ struct reset_control *ahb_reset;
+ struct reset_control *por_reset;
+ struct reset_control *phy_reset;
++ struct reset_control *ext_reset;
+ struct regulator *vdda;
+ struct regulator *vdda_phy;
+ struct regulator *vdda_refclk;
+@@ -190,6 +191,10 @@ static int qcom_pcie_get_resources_v0(st
+ if (IS_ERR(res->phy_reset))
+ return PTR_ERR(res->phy_reset);
+
++ res->ext_reset = devm_reset_control_get(dev, "ext");
++ if (IS_ERR(res->ext_reset))
++ return PTR_ERR(res->ext_reset);
++
+ return 0;
+ }
+
+@@ -234,6 +239,7 @@ static void qcom_pcie_deinit_v0(struct q
+ reset_control_assert(res->ahb_reset);
+ reset_control_assert(res->por_reset);
+ reset_control_assert(res->pci_reset);
++ reset_control_assert(res->ext_reset);
+ clk_disable_unprepare(res->iface_clk);
+ clk_disable_unprepare(res->core_clk);
+ clk_disable_unprepare(res->phy_clk);
+@@ -251,6 +257,12 @@ static int qcom_pcie_init_v0(struct qcom
+ u32 val;
+ int ret;
+
++ ret = reset_control_assert(res->ahb_reset);
++ if (ret) {
++ dev_err(dev, "cannot assert ahb reset\n");
++ return ret;
++ }
++
+ ret = regulator_enable(res->vdda);
+ if (ret) {
+ dev_err(dev, "cannot enable vdda regulator\n");
+@@ -269,16 +281,16 @@ static int qcom_pcie_init_v0(struct qcom
+ goto err_vdda_phy;
+ }
+
+- ret = reset_control_assert(res->ahb_reset);
++ ret = reset_control_deassert(res->ext_reset);
+ if (ret) {
+- dev_err(dev, "cannot assert ahb reset\n");
+- goto err_assert_ahb;
++ dev_err(dev, "cannot assert ext reset\n");
++ goto err_reset_ext;
+ }
+
+ ret = clk_prepare_enable(res->iface_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable iface clock\n");
+- goto err_assert_ahb;
++ goto err_iface;
+ }
+
+ ret = clk_prepare_enable(res->core_clk);
+@@ -360,7 +372,9 @@ err_clk_phy:
+ clk_disable_unprepare(res->core_clk);
+ err_clk_core:
+ clk_disable_unprepare(res->iface_clk);
+-err_assert_ahb:
++err_iface:
++ reset_control_assert(res->ext_reset);
++err_reset_ext:
+ regulator_disable(res->vdda_phy);
+ err_vdda_phy:
+ regulator_disable(res->vdda_refclk);
diff --git a/target/linux/ipq806x/patches-4.9/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch b/target/linux/ipq806x/patches-4.9/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch
new file mode 100644
index 0000000000..6c68edfe99
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch
@@ -0,0 +1,127 @@
+From eddd13215d0f2b549ebc5f0e8796d5b1231f90a0 Mon Sep 17 00:00:00 2001
+From: Sham Muthayyan <smuthayy@codeaurora.org>
+Date: Tue, 19 Jul 2016 19:58:22 +0530
+Subject: PCI: qcom: Fixed IPQ806x PCIE init changes
+
+Change-Id: Ic319b1aec27a47809284759f8fcb6a8815b7cf7e
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 62 +++++++++++++++++++++++++++++++++++++-------
+ 1 file changed, 53 insertions(+), 9 deletions(-)
+
+--- a/drivers/pci/host/pcie-qcom.c
++++ b/drivers/pci/host/pcie-qcom.c
+@@ -37,7 +37,13 @@
+ #include "pcie-designware.h"
+
+ #define PCIE20_PARF_PHY_CTRL 0x40
++#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16)
++#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16)
++
+ #define PCIE20_PARF_PHY_REFCLK 0x4C
++#define REF_SSP_EN BIT(16)
++#define REF_USE_PAD BIT(12)
++
+ #define PCIE20_PARF_DBI_BASE_ADDR 0x168
+ #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c
+ #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178
+@@ -48,6 +54,18 @@
+ #define PCIE20_CAP 0x70
+
+ #define PERST_DELAY_US 1000
++/* PARF registers */
++#define PCIE20_PARF_PCS_DEEMPH 0x34
++#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16)
++#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8)
++#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0)
++
++#define PCIE20_PARF_PCS_SWING 0x38
++#define PCS_SWING_TX_SWING_FULL(x) (x << 8)
++#define PCS_SWING_TX_SWING_LOW(x) (x << 0)
++
++#define PCIE20_PARF_CONFIG_BITS 0x50
++#define PHY_RX0_EQ(x) (x << 24)
+
+ struct qcom_pcie_resources_v0 {
+ struct clk *iface_clk;
+@@ -64,6 +82,7 @@ struct qcom_pcie_resources_v0 {
+ struct regulator *vdda;
+ struct regulator *vdda_phy;
+ struct regulator *vdda_refclk;
++ uint8_t phy_tx0_term_offset;
+ };
+
+ struct qcom_pcie_resources_v1 {
+@@ -100,6 +119,16 @@ struct qcom_pcie {
+
+ #define to_qcom_pcie(x) container_of(x, struct qcom_pcie, pp)
+
++static inline void
++writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
++{
++ u32 val = readl(addr);
++
++ val &= ~clear_mask;
++ val |= set_mask;
++ writel(val, addr);
++}
++
+ static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
+ {
+ gpiod_set_value(pcie->reset, 1);
+@@ -195,6 +224,10 @@ static int qcom_pcie_get_resources_v0(st
+ if (IS_ERR(res->ext_reset))
+ return PTR_ERR(res->ext_reset);
+
++ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
++ &res->phy_tx0_term_offset))
++ res->phy_tx0_term_offset = 0;
++
+ return 0;
+ }
+
+@@ -254,7 +287,6 @@ static int qcom_pcie_init_v0(struct qcom
+ {
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+ struct device *dev = pcie->pp.dev;
+- u32 val;
+ int ret;
+
+ ret = reset_control_assert(res->ahb_reset);
+@@ -323,15 +355,27 @@ static int qcom_pcie_init_v0(struct qcom
+ goto err_deassert_ahb;
+ }
+
+- /* enable PCIe clocks and resets */
+- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
+- val &= ~BIT(0);
+- writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
+-
+- /* enable external reference clock */
+- val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
+- val |= BIT(16);
+- writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
++ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
++
++ /* Set Tx termination offset */
++ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL,
++ PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK,
++ PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset));
++
++ /* PARF programming */
++ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) |
++ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) |
++ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22),
++ pcie->parf + PCIE20_PARF_PCS_DEEMPH);
++ writel(PCS_SWING_TX_SWING_FULL(0x78) |
++ PCS_SWING_TX_SWING_LOW(0x78),
++ pcie->parf + PCIE20_PARF_PCS_SWING);
++ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
++
++ /* Enable reference clock */
++ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
++ REF_USE_PAD, REF_SSP_EN);
++
+
+ ret = reset_control_deassert(res->phy_reset);
+ if (ret) {
diff --git a/target/linux/ipq806x/patches-4.9/0071-4-PCIE-designware-Fixed-PCI-host-init.patch b/target/linux/ipq806x/patches-4.9/0071-4-PCIE-designware-Fixed-PCI-host-init.patch
new file mode 100644
index 0000000000..af9e121f82
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0071-4-PCIE-designware-Fixed-PCI-host-init.patch
@@ -0,0 +1,68 @@
+From e833cdb5c792912d459773cc23153e5d78875d34 Mon Sep 17 00:00:00 2001
+From: Sham Muthayyan <smuthayy@codeaurora.org>
+Date: Tue, 19 Jul 2016 20:05:25 +0530
+Subject: PCIE: designware: Fixed PCI host init
+
+Change-Id: I949b302d77199fc09342acf26b7bb45a7ec467ee
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+---
+ drivers/pci/host/pcie-designware.c | 9 +++++++--
+ drivers/pci/host/pcie-designware.h | 2 +-
+ drivers/pci/host/pcie-qcom.c | 5 +++--
+ 3 files changed, 11 insertions(+), 5 deletions(-)
+
+--- a/drivers/pci/host/pcie-designware.c
++++ b/drivers/pci/host/pcie-designware.c
+@@ -637,8 +637,13 @@ int dw_pcie_host_init(struct pcie_port *
+ }
+ }
+
+- if (pp->ops->host_init)
+- pp->ops->host_init(pp);
++ if (pp->ops->host_init) {
++ ret = pp->ops->host_init(pp);
++ if (ret) {
++ dev_err(pp->dev, "hostinit failed\n");
++ return 0;
++ }
++ }
+
+ pp->root_bus_nr = pp->busn->start;
+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
+--- a/drivers/pci/host/pcie-designware.h
++++ b/drivers/pci/host/pcie-designware.h
+@@ -63,7 +63,7 @@ struct pcie_host_ops {
+ int (*wr_other_conf)(struct pcie_port *pp, struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 val);
+ int (*link_up)(struct pcie_port *pp);
+- void (*host_init)(struct pcie_port *pp);
++ int (*host_init)(struct pcie_port *pp);
+ void (*msi_set_irq)(struct pcie_port *pp, int irq);
+ void (*msi_clear_irq)(struct pcie_port *pp, int irq);
+ phys_addr_t (*get_msi_addr)(struct pcie_port *pp);
+--- a/drivers/pci/host/pcie-qcom.c
++++ b/drivers/pci/host/pcie-qcom.c
+@@ -515,7 +515,7 @@ static int qcom_pcie_link_up(struct pcie
+ return !!(val & PCI_EXP_LNKSTA_DLLLA);
+ }
+
+-static void qcom_pcie_host_init(struct pcie_port *pp)
++static int qcom_pcie_host_init(struct pcie_port *pp)
+ {
+ struct qcom_pcie *pcie = to_qcom_pcie(pp);
+ int ret;
+@@ -541,12 +541,13 @@ static void qcom_pcie_host_init(struct p
+ if (ret)
+ goto err;
+
+- return;
++ return 0;
+ err:
+ qcom_ep_reset_assert(pcie);
+ phy_power_off(pcie->phy);
+ err_deinit:
+ pcie->ops->deinit(pcie);
++ return ret;
+ }
+
+ static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size,
diff --git a/target/linux/ipq806x/patches-4.9/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch b/target/linux/ipq806x/patches-4.9/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch
new file mode 100644
index 0000000000..98e2b54e39
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch
@@ -0,0 +1,113 @@
+From d27c303e828d7e42f339a459d2abfe30c51698e9 Mon Sep 17 00:00:00 2001
+From: Sham Muthayyan <smuthayy@codeaurora.org>
+Date: Tue, 26 Jul 2016 12:28:31 +0530
+Subject: PCI: qcom: Programming the PCIE iATU for IPQ806x
+
+Resolved PCIE EP detection errors caused due to missing iATU programming.
+
+Change-Id: Ie95c0f8cb940abc0192a8a3c4e825ddba54b72fe
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 77 ++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 77 insertions(+)
+
+--- a/drivers/pci/host/pcie-qcom.c
++++ b/drivers/pci/host/pcie-qcom.c
+@@ -52,6 +52,29 @@
+ #define PCIE20_ELBI_SYS_CTRL_LT_ENABLE BIT(0)
+
+ #define PCIE20_CAP 0x70
++#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
++
++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c
++
++#define PCIE20_PLR_IATU_VIEWPORT 0x900
++#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31)
++#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0)
++
++#define PCIE20_PLR_IATU_CTRL1 0x904
++#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0)
++#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0)
++
++#define PCIE20_PLR_IATU_CTRL2 0x908
++#define PCIE20_PLR_IATU_ENABLE BIT(31)
++
++#define PCIE20_PLR_IATU_LBAR 0x90C
++#define PCIE20_PLR_IATU_UBAR 0x910
++#define PCIE20_PLR_IATU_LAR 0x914
++#define PCIE20_PLR_IATU_LTAR 0x918
++#define PCIE20_PLR_IATU_UTAR 0x91c
++
++#define MSM_PCIE_DEV_CFG_ADDR 0x01000000
+
+ #define PERST_DELAY_US 1000
+ /* PARF registers */
+@@ -163,6 +186,57 @@ static int qcom_pcie_establish_link(stru
+ return dw_pcie_wait_for_link(&pcie->pp);
+ }
+
++static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
++{
++ struct pcie_port *pp = &pcie->pp;
++
++ /*
++ * program and enable address translation region 0 (device config
++ * address space); region type config;
++ * axi config address range to device config address range
++ */
++ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
++ PCIE20_PLR_IATU_REGION_INDEX(0),
++ pcie->pp.dbi_base + PCIE20_PLR_IATU_VIEWPORT);
++
++ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL1);
++ writel(PCIE20_PLR_IATU_ENABLE, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL2);
++ writel(pp->cfg0_base, pcie->pp.dbi_base + PCIE20_PLR_IATU_LBAR);
++ writel((pp->cfg0_base >> 32), pcie->pp.dbi_base + PCIE20_PLR_IATU_UBAR);
++ writel((pp->cfg0_base + pp->cfg0_size - 1),
++ pcie->pp.dbi_base + PCIE20_PLR_IATU_LAR);
++ writel(busdev, pcie->pp.dbi_base + PCIE20_PLR_IATU_LTAR);
++ writel(0, pcie->pp.dbi_base + PCIE20_PLR_IATU_UTAR);
++}
++
++static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie)
++{
++ struct pcie_port *pp = &pcie->pp;
++
++ /*
++ * program and enable address translation region 2 (device resource
++ * address space); region type memory;
++ * axi device bar address range to device bar address range
++ */
++ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
++ PCIE20_PLR_IATU_REGION_INDEX(2),
++ pcie->pp.dbi_base + PCIE20_PLR_IATU_VIEWPORT);
++
++ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL1);
++ writel(PCIE20_PLR_IATU_ENABLE, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL2);
++ writel(pp->mem_base, pcie->pp.dbi_base + PCIE20_PLR_IATU_LBAR);
++ writel((pp->mem_base >> 32), pcie->pp.dbi_base + PCIE20_PLR_IATU_UBAR);
++ writel(pp->mem_base + pp->mem_size - 1,
++ pcie->pp.dbi_base + PCIE20_PLR_IATU_LAR);
++ writel(pp->mem_bus_addr, pcie->pp.dbi_base + PCIE20_PLR_IATU_LTAR);
++ writel(upper_32_bits(pp->mem_bus_addr),
++ pcie->pp.dbi_base + PCIE20_PLR_IATU_UTAR);
++
++ /* 256B PCIE buffer setting */
++ writel(0x1, pcie->pp.dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
++ writel(0x1, pcie->pp.dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
++}
++
+ static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie)
+ {
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+@@ -404,6 +478,9 @@ static int qcom_pcie_init_v0(struct qcom
+ /* wait for clock acquisition */
+ usleep_range(1000, 1500);
+
++ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
++ qcom_pcie_prog_viewport_mem2_outbound(pcie);
++
+ return 0;
+
+ err_deassert_ahb:
diff --git a/target/linux/ipq806x/patches-4.9/0071-6-PCI-qcom-Force-GEN1-support.patch b/target/linux/ipq806x/patches-4.9/0071-6-PCI-qcom-Force-GEN1-support.patch
new file mode 100644
index 0000000000..91891a5b21
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0071-6-PCI-qcom-Force-GEN1-support.patch
@@ -0,0 +1,61 @@
+From 4910cfd150342ec7b038892262923c725a9c4001 Mon Sep 17 00:00:00 2001
+From: Sham Muthayyan <smuthayy@codeaurora.org>
+Date: Wed, 7 Sep 2016 16:44:28 +0530
+Subject: PCI: qcom: Force GEN1 support
+
+Change-Id: Ica54ddb737d7b851469deab1745f54bf431bd3f0
+Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/drivers/pci/host/pcie-qcom.c
++++ b/drivers/pci/host/pcie-qcom.c
+@@ -90,6 +90,8 @@
+ #define PCIE20_PARF_CONFIG_BITS 0x50
+ #define PHY_RX0_EQ(x) (x << 24)
+
++#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0
++
+ struct qcom_pcie_resources_v0 {
+ struct clk *iface_clk;
+ struct clk *core_clk;
+@@ -138,6 +140,7 @@ struct qcom_pcie {
+ struct phy *phy;
+ struct gpio_desc *reset;
+ struct qcom_pcie_ops *ops;
++ uint32_t force_gen1;
+ };
+
+ #define to_qcom_pcie(x) container_of(x, struct qcom_pcie, pp)
+@@ -477,6 +480,11 @@ static int qcom_pcie_init_v0(struct qcom
+
+ /* wait for clock acquisition */
+ usleep_range(1000, 1500);
++ if (pcie->force_gen1) {
++ writel_relaxed((readl_relaxed(
++ pcie->pp.dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2) | 1),
++ pcie->pp.dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
++ }
+
+ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
+ qcom_pcie_prog_viewport_mem2_outbound(pcie);
+@@ -666,6 +674,8 @@ static int qcom_pcie_probe(struct platfo
+ struct qcom_pcie *pcie;
+ struct pcie_port *pp;
+ int ret;
++ uint32_t force_gen1 = 0;
++ struct device_node *np = pdev->dev.of_node;
+
+ pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+ if (!pcie)
+@@ -678,6 +688,9 @@ static int qcom_pcie_probe(struct platfo
+ if (IS_ERR(pcie->reset))
+ return PTR_ERR(pcie->reset);
+
++ of_property_read_u32(np, "force_gen1", &force_gen1);
++ pcie->force_gen1 = force_gen1;
++
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
+ pcie->parf = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pcie->parf))
diff --git a/target/linux/ipq806x/patches-4.9/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch b/target/linux/ipq806x/patches-4.9/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch
new file mode 100644
index 0000000000..157386458e
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch
@@ -0,0 +1,69 @@
+From edff8f777c6321ca89bb950a382f409c4a126e28 Mon Sep 17 00:00:00 2001
+From: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
+Date: Thu, 15 Dec 2016 17:38:18 +0530
+Subject: pcie: Set PCIE MRRS and MPS to 256B
+
+Set Max Read Request Size and Max Payload Size to 256 bytes,
+per chip team recommendation.
+
+Change-Id: I097004be2ced1b3096ffc10c318aae0b2bb155e8
+Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 37 +++++++++++++++++++++++++++++++++++++
+ 1 file changed, 37 insertions(+)
+
+(limited to 'drivers/pci/host/pcie-qcom.c')
+
+--- a/drivers/pci/host/pcie-qcom.c
++++ b/drivers/pci/host/pcie-qcom.c
+@@ -92,6 +92,14 @@
+
+ #define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0
+
++#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b))
++#define __mask(a, b) (((1 << ((a) + 1)) - 1) & ~((1 << (b)) - 1))
++#define PCIE20_DEV_CAS 0x78
++#define PCIE20_MRRS_MASK __mask(14, 12)
++#define PCIE20_MRRS(x) __set(x, 14, 12)
++#define PCIE20_MPS_MASK __mask(7, 5)
++#define PCIE20_MPS(x) __set(x, 7, 5)
++
+ struct qcom_pcie_resources_v0 {
+ struct clk *iface_clk;
+ struct clk *core_clk;
+@@ -745,6 +753,35 @@ static int qcom_pcie_probe(struct platfo
+ return 0;
+ }
+
++static void qcom_pcie_fixup_final(struct pci_dev *dev)
++{
++ int cap, err;
++ u16 ctl, reg_val;
++
++ cap = pci_pcie_cap(dev);
++ if (!cap)
++ return;
++
++ err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
++
++ if (err)
++ return;
++
++ reg_val = ctl;
++
++ if (((reg_val & PCIE20_MRRS_MASK) >> 12) > 1)
++ reg_val = (reg_val & ~(PCIE20_MRRS_MASK)) | PCIE20_MRRS(0x1);
++
++ if (((ctl & PCIE20_MPS_MASK) >> 5) > 1)
++ reg_val = (reg_val & ~(PCIE20_MPS_MASK)) | PCIE20_MPS(0x1);
++
++ err = pci_write_config_word(dev, cap + PCI_EXP_DEVCTL, reg_val);
++
++ if (err)
++ pr_err("pcie config write failed %d\n", err);
++}
++DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, qcom_pcie_fixup_final);
++
+ static const struct of_device_id qcom_pcie_match[] = {
+ { .compatible = "qcom,pcie-ipq8064", .data = &ops_v0 },
+ { .compatible = "qcom,pcie-apq8064", .data = &ops_v0 },
diff --git a/target/linux/ipq806x/patches-4.9/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch b/target/linux/ipq806x/patches-4.9/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch
new file mode 100644
index 0000000000..0f5050826c
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch
@@ -0,0 +1,91 @@
+From b74bab6186131eea09459eedf5d737645a3559c9 Mon Sep 17 00:00:00 2001
+From: Abhishek Sahu <absahu@codeaurora.org>
+Date: Thu, 22 Dec 2016 11:18:45 +0530
+Subject: pcie: qcom: Fixed pcie_phy_clk branch issue
+
+Following backtraces are observed in PCIe deinit operation.
+
+ Hardware name: Qualcomm (Flattened Device Tree)
+ (unwind_backtrace) from [] (show_stack+0x10/0x14)
+ (show_stack) from [] (dump_stack+0x84/0x98)
+ (dump_stack) from [] (warn_slowpath_common+0x9c/0xb8)
+ (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40)
+ (warn_slowpath_fmt) from [] (clk_branch_wait+0x114/0x120)
+ (clk_branch_wait) from [] (clk_core_disable+0xd0/0x1f4)
+ (clk_core_disable) from [] (clk_disable+0x24/0x30)
+ (clk_disable) from [] (qcom_pcie_deinit_v0+0x6c/0xb8)
+ (qcom_pcie_deinit_v0) from [] (qcom_pcie_host_init+0xe0/0xe8)
+ (qcom_pcie_host_init) from [] (dw_pcie_host_init+0x3b0/0x538)
+ (dw_pcie_host_init) from [] (qcom_pcie_probe+0x20c/0x2e4)
+
+pcie_phy_clk is generated for PCIe controller itself and the
+GCC controls its branch operation. This error is coming since
+the assert operations turn off the parent clock before branch
+clock. Now this patch moves clk_disable_unprepare before assert
+operations.
+
+Similarly, during probe function, the clock branch operation
+should be done after dessert operation. Currently, it does not
+generate any error since bootloader enables the pcie_phy_clk
+but the same error is coming during probe, if bootloader
+disables pcie_phy_clk.
+
+Change-Id: Ib29c154d10eb64363d9cc982ce5fd8107af5627d
+Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 16 +++++++---------
+ 1 file changed, 7 insertions(+), 9 deletions(-)
+
+--- a/drivers/pci/host/pcie-qcom.c
++++ b/drivers/pci/host/pcie-qcom.c
+@@ -352,6 +352,7 @@ static void qcom_pcie_deinit_v0(struct q
+ {
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+
++ clk_disable_unprepare(res->phy_clk);
+ reset_control_assert(res->pci_reset);
+ reset_control_assert(res->axi_reset);
+ reset_control_assert(res->ahb_reset);
+@@ -360,7 +361,6 @@ static void qcom_pcie_deinit_v0(struct q
+ reset_control_assert(res->ext_reset);
+ clk_disable_unprepare(res->iface_clk);
+ clk_disable_unprepare(res->core_clk);
+- clk_disable_unprepare(res->phy_clk);
+ clk_disable_unprepare(res->aux_clk);
+ clk_disable_unprepare(res->ref_clk);
+ regulator_disable(res->vdda);
+@@ -416,12 +416,6 @@ static int qcom_pcie_init_v0(struct qcom
+ goto err_clk_core;
+ }
+
+- ret = clk_prepare_enable(res->phy_clk);
+- if (ret) {
+- dev_err(dev, "cannot prepare/enable phy clock\n");
+- goto err_clk_phy;
+- }
+-
+ ret = clk_prepare_enable(res->aux_clk);
+ if (ret) {
+ dev_err(dev, "cannot prepare/enable aux clock\n");
+@@ -486,6 +480,12 @@ static int qcom_pcie_init_v0(struct qcom
+ return ret;
+ }
+
++ ret = clk_prepare_enable(res->phy_clk);
++ if (ret) {
++ dev_err(dev, "cannot prepare/enable phy clock\n");
++ goto err_deassert_ahb;
++ }
++
+ /* wait for clock acquisition */
+ usleep_range(1000, 1500);
+ if (pcie->force_gen1) {
+@@ -504,8 +504,6 @@ err_deassert_ahb:
+ err_clk_ref:
+ clk_disable_unprepare(res->aux_clk);
+ err_clk_aux:
+- clk_disable_unprepare(res->phy_clk);
+-err_clk_phy:
+ clk_disable_unprepare(res->core_clk);
+ err_clk_core:
+ clk_disable_unprepare(res->iface_clk);
diff --git a/target/linux/ipq806x/patches-4.9/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch b/target/linux/ipq806x/patches-4.9/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch
new file mode 100644
index 0000000000..a60add93c7
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.9/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch
@@ -0,0 +1,25 @@
+From 1a9c48123bd09f75562b6a2ee0f0a7b2d533cd45 Mon Sep 17 00:00:00 2001
+From: Abhishek Sahu <absahu@codeaurora.org>
+Date: Thu, 22 Dec 2016 11:50:49 +0530
+Subject: pcie: qcom: change duplicate pci reset to phy reset
+
+The deinit issues reset_control_assert for pci twice and
+does not contain phy reset.
+
+Change-Id: Iba849963c7e5f9a2a1063f0e2e89635df70b8a99
+Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
+---
+ drivers/pci/host/pcie-qcom.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/pci/host/pcie-qcom.c
++++ b/drivers/pci/host/pcie-qcom.c
+@@ -353,7 +353,7 @@ static void qcom_pcie_deinit_v0(struct q
+ struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
+
+ clk_disable_unprepare(res->phy_clk);
+- reset_control_assert(res->pci_reset);
++ reset_control_assert(res->phy_reset);
+ reset_control_assert(res->axi_reset);
+ reset_control_assert(res->ahb_reset);
+ reset_control_assert(res->por_reset);
diff --git a/target/linux/ipq806x/patches-4.9/0071-pcie-qcom-fixes.patch b/target/linux/ipq806x/patches-4.9/0071-pcie-qcom-fixes.patch
deleted file mode 100644
index dd403e2957..0000000000
--- a/target/linux/ipq806x/patches-4.9/0071-pcie-qcom-fixes.patch
+++ /dev/null
@@ -1,308 +0,0 @@
---- a/drivers/pci/host/pcie-qcom.c
-+++ b/drivers/pci/host/pcie-qcom.c
-@@ -36,8 +36,50 @@
-
- #include "pcie-designware.h"
-
-+/* DBI registers */
-+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
-+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c
-+
-+#define PCIE20_PLR_IATU_VIEWPORT 0x900
-+#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31)
-+#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0)
-+
-+#define PCIE20_PLR_IATU_CTRL1 0x904
-+#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0)
-+#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0)
-+
-+#define PCIE20_PLR_IATU_CTRL2 0x908
-+#define PCIE20_PLR_IATU_ENABLE BIT(31)
-+
-+#define PCIE20_PLR_IATU_LBAR 0x90C
-+#define PCIE20_PLR_IATU_UBAR 0x910
-+#define PCIE20_PLR_IATU_LAR 0x914
-+#define PCIE20_PLR_IATU_LTAR 0x918
-+#define PCIE20_PLR_IATU_UTAR 0x91c
-+
-+#define MSM_PCIE_DEV_CFG_ADDR 0x01000000
-+
-+/* PARF registers */
-+#define PCIE20_PARF_PCS_DEEMPH 0x34
-+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16)
-+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8)
-+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0)
-+
-+#define PCIE20_PARF_PCS_SWING 0x38
-+#define PCS_SWING_TX_SWING_FULL(x) (x << 8)
-+#define PCS_SWING_TX_SWING_LOW(x) (x << 0)
-+
- #define PCIE20_PARF_PHY_CTRL 0x40
-+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16)
-+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16)
-+
- #define PCIE20_PARF_PHY_REFCLK 0x4C
-+#define REF_SSP_EN BIT(16)
-+#define REF_USE_PAD BIT(12)
-+
-+#define PCIE20_PARF_CONFIG_BITS 0x50
-+#define PHY_RX0_EQ(x) (x << 24)
-+
- #define PCIE20_PARF_DBI_BASE_ADDR 0x168
- #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c
- #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178
-@@ -53,14 +95,18 @@ struct qcom_pcie_resources_v0 {
- struct clk *iface_clk;
- struct clk *core_clk;
- struct clk *phy_clk;
-+ struct clk *aux_clk;
-+ struct clk *ref_clk;
- struct reset_control *pci_reset;
- struct reset_control *axi_reset;
- struct reset_control *ahb_reset;
- struct reset_control *por_reset;
- struct reset_control *phy_reset;
-+ struct reset_control *ext_reset;
- struct regulator *vdda;
- struct regulator *vdda_phy;
- struct regulator *vdda_refclk;
-+ uint8_t phy_tx0_term_offset;
- };
-
- struct qcom_pcie_resources_v1 {
-@@ -82,6 +128,7 @@ struct qcom_pcie;
- struct qcom_pcie_ops {
- int (*get_resources)(struct qcom_pcie *pcie);
- int (*init)(struct qcom_pcie *pcie);
-+ void (*configure)(struct qcom_pcie *pcie);
- void (*deinit)(struct qcom_pcie *pcie);
- };
-
-@@ -160,6 +207,14 @@ static int qcom_pcie_get_resources_v0(st
- if (IS_ERR(res->phy_clk))
- return PTR_ERR(res->phy_clk);
-
-+ res->aux_clk = devm_clk_get(dev, "aux");
-+ if (IS_ERR(res->aux_clk))
-+ return PTR_ERR(res->aux_clk);
-+
-+ res->ref_clk = devm_clk_get(dev, "ref");
-+ if (IS_ERR(res->ref_clk))
-+ return PTR_ERR(res->ref_clk);
-+
- res->pci_reset = devm_reset_control_get(dev, "pci");
- if (IS_ERR(res->pci_reset))
- return PTR_ERR(res->pci_reset);
-@@ -180,6 +235,14 @@ static int qcom_pcie_get_resources_v0(st
- if (IS_ERR(res->phy_reset))
- return PTR_ERR(res->phy_reset);
-
-+ res->ext_reset = devm_reset_control_get(dev, "ext");
-+ if (IS_ERR(res->ext_reset))
-+ return PTR_ERR(res->ext_reset);
-+
-+ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
-+ &res->phy_tx0_term_offset))
-+ res->phy_tx0_term_offset = 0;
-+
- return 0;
- }
-
-@@ -223,15 +286,69 @@ static void qcom_pcie_deinit_v0(struct q
- reset_control_assert(res->axi_reset);
- reset_control_assert(res->ahb_reset);
- reset_control_assert(res->por_reset);
-- reset_control_assert(res->pci_reset);
-+ reset_control_assert(res->phy_reset);
-+ reset_control_assert(res->ext_reset);
- clk_disable_unprepare(res->iface_clk);
- clk_disable_unprepare(res->core_clk);
- clk_disable_unprepare(res->phy_clk);
-+ clk_disable_unprepare(res->aux_clk);
-+ clk_disable_unprepare(res->ref_clk);
- regulator_disable(res->vdda);
- regulator_disable(res->vdda_phy);
- regulator_disable(res->vdda_refclk);
- }
-
-+static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
-+{
-+ struct pcie_port *pp = &pcie->pp;
-+
-+ /*
-+ * program and enable address translation region 0 (device config
-+ * address space); region type config;
-+ * axi config address range to device config address range
-+ */
-+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
-+ PCIE20_PLR_IATU_REGION_INDEX(0),
-+ pcie->pp.dbi_base + PCIE20_PLR_IATU_VIEWPORT);
-+
-+ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL1);
-+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL2);
-+ writel(pp->cfg0_base, pcie->pp.dbi_base + PCIE20_PLR_IATU_LBAR);
-+ writel((pp->cfg0_base >> 32), pcie->pp.dbi_base + PCIE20_PLR_IATU_UBAR);
-+ writel((pp->cfg0_base + pp->cfg0_size - 1),
-+ pcie->pp.dbi_base + PCIE20_PLR_IATU_LAR);
-+ writel(busdev, pcie->pp.dbi_base + PCIE20_PLR_IATU_LTAR);
-+ writel(0, pcie->pp.dbi_base + PCIE20_PLR_IATU_UTAR);
-+}
-+
-+static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie)
-+{
-+ struct pcie_port *pp = &pcie->pp;
-+
-+ /*
-+ * program and enable address translation region 2 (device resource
-+ * address space); region type memory;
-+ * axi device bar address range to device bar address range
-+ */
-+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
-+ PCIE20_PLR_IATU_REGION_INDEX(2),
-+ pcie->pp.dbi_base + PCIE20_PLR_IATU_VIEWPORT);
-+
-+ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL1);
-+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL2);
-+ writel(pp->mem_base, pcie->pp.dbi_base + PCIE20_PLR_IATU_LBAR);
-+ writel((pp->mem_base >> 32), pcie->pp.dbi_base + PCIE20_PLR_IATU_UBAR);
-+ writel(pp->mem_base + pp->mem_size - 1,
-+ pcie->pp.dbi_base + PCIE20_PLR_IATU_LAR);
-+ writel(pp->mem_bus_addr, pcie->pp.dbi_base + PCIE20_PLR_IATU_LTAR);
-+ writel(upper_32_bits(pp->mem_bus_addr),
-+ pcie->pp.dbi_base + PCIE20_PLR_IATU_UTAR);
-+
-+ /* 256B PCIE buffer setting */
-+ writel(0x1, pcie->pp.dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
-+ writel(0x1, pcie->pp.dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
-+}
-+
- static int qcom_pcie_init_v0(struct qcom_pcie *pcie)
- {
- struct qcom_pcie_resources_v0 *res = &pcie->res.v0;
-@@ -260,13 +377,19 @@ static int qcom_pcie_init_v0(struct qcom
- ret = reset_control_assert(res->ahb_reset);
- if (ret) {
- dev_err(dev, "cannot assert ahb reset\n");
-- goto err_assert_ahb;
-+ goto err_assert_reset;
-+ }
-+
-+ ret = reset_control_deassert(res->ext_reset);
-+ if (ret) {
-+ dev_err(dev, "cannot deassert ext reset\n");
-+ goto err_assert_reset;
- }
-
- ret = clk_prepare_enable(res->iface_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable iface clock\n");
-- goto err_assert_ahb;
-+ goto err_assert_reset;
- }
-
- ret = clk_prepare_enable(res->phy_clk);
-@@ -281,22 +404,53 @@ static int qcom_pcie_init_v0(struct qcom
- goto err_clk_core;
- }
-
-+ ret = clk_prepare_enable(res->aux_clk);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable aux clock\n");
-+ goto err_clk_aux;
-+ }
-+
-+ ret = clk_prepare_enable(res->ref_clk);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable ref clock\n");
-+ goto err_clk_ref;
-+ }
-+
- ret = reset_control_deassert(res->ahb_reset);
- if (ret) {
- dev_err(dev, "cannot deassert ahb reset\n");
- goto err_deassert_ahb;
- }
-+ udelay(1);
-
- /* enable PCIe clocks and resets */
- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
- val &= ~BIT(0);
- writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
-
-- /* enable external reference clock */
-+ /* Set Tx termination offset */
-+ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
-+ val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK;
-+ val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset);
-+ writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
-+
-+ /* PARF programming */
-+ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) |
-+ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) |
-+ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22),
-+ pcie->parf + PCIE20_PARF_PCS_DEEMPH);
-+ writel(PCS_SWING_TX_SWING_FULL(0x78) |
-+ PCS_SWING_TX_SWING_LOW(0x78),
-+ pcie->parf + PCIE20_PARF_PCS_SWING);
-+ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
-+
-+ /* Enable reference clock */
- val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
-- val |= BIT(16);
-+ val &= ~REF_USE_PAD;
-+ val |= REF_SSP_EN;
- writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
-
-+ /* De-assert PHY, PCIe, POR and AXI resets */
- ret = reset_control_deassert(res->phy_reset);
- if (ret) {
- dev_err(dev, "cannot deassert phy reset\n");
-@@ -327,12 +481,16 @@ static int qcom_pcie_init_v0(struct qcom
- return 0;
-
- err_deassert_ahb:
-+ clk_disable_unprepare(res->ref_clk);
-+err_clk_ref:
-+ clk_disable_unprepare(res->aux_clk);
-+err_clk_aux:
- clk_disable_unprepare(res->core_clk);
- err_clk_core:
- clk_disable_unprepare(res->phy_clk);
- err_clk_phy:
- clk_disable_unprepare(res->iface_clk);
--err_assert_ahb:
-+err_assert_reset:
- regulator_disable(res->vdda_phy);
- err_vdda_phy:
- regulator_disable(res->vdda_refclk);
-@@ -342,6 +500,12 @@ err_refclk:
- return ret;
- }
-
-+static void qcom_pcie_configure_v0(struct qcom_pcie *pcie)
-+{
-+ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
-+ qcom_pcie_prog_viewport_mem2_outbound(pcie);
-+}
-+
- static void qcom_pcie_deinit_v1(struct qcom_pcie *pcie)
- {
- struct qcom_pcie_resources_v1 *res = &pcie->res.v1;
-@@ -455,6 +619,9 @@ static void qcom_pcie_host_init(struct p
- if (ret)
- goto err;
-
-+ if (pcie->ops->init)
-+ pcie->ops->init(pcie);
-+
- return;
- err:
- qcom_ep_reset_assert(pcie);
-@@ -486,6 +653,7 @@ static struct pcie_host_ops qcom_pcie_dw
- static const struct qcom_pcie_ops ops_v0 = {
- .get_resources = qcom_pcie_get_resources_v0,
- .init = qcom_pcie_init_v0,
-+ .configure = qcom_pcie_configure_v0,
- .deinit = qcom_pcie_deinit_v0,
- };
-