aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/generic/patches-4.3/142-mtd-spi-nor-include-mtd.h-header-for-struct-mtd_info.patch2
-rw-r--r--target/linux/ramips/Makefile4
-rw-r--r--target/linux/ramips/dts/mt7621.dtsi32
-rw-r--r--target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c4
-rw-r--r--target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c15
-rw-r--r--target/linux/ramips/mt7620/config-4.3 (renamed from target/linux/ramips/mt7620/config-3.18)41
-rw-r--r--target/linux/ramips/mt7621/config-4.3 (renamed from target/linux/ramips/mt7621/config-3.18)41
-rw-r--r--target/linux/ramips/mt7628/config-4.3 (renamed from target/linux/ramips/mt7628/config-3.18)38
-rw-r--r--target/linux/ramips/mt7688/config-4.3 (renamed from target/linux/ramips/mt7688/config-3.18)36
-rw-r--r--target/linux/ramips/patches-3.18/0001-MIPS-ralink-add-verbose-pmu-info.patch59
-rw-r--r--target/linux/ramips/patches-3.18/0002-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch22
-rw-r--r--target/linux/ramips/patches-3.18/0003-MIPS-ralink-add-rt_sysc_m32-helper.patch26
-rw-r--r--target/linux/ramips/patches-3.18/0004-MIPS-ralink-adds-a-bootrom-dumper-module.patch74
-rw-r--r--target/linux/ramips/patches-3.18/0005-MIPS-ralink-add-illegal-access-driver.patch115
-rw-r--r--target/linux/ramips/patches-3.18/0006-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch27
-rw-r--r--target/linux/ramips/patches-3.18/0007-MIPS-ralink-add-support-for-MT7620n.patch66
-rw-r--r--target/linux/ramips/patches-3.18/0008-MIPS-ralink-allow-manual-memory-override.patch45
-rw-r--r--target/linux/ramips/patches-3.18/0009-MIPS-ralink-define-the-wmac-clock-on-mt7620.patch20
-rw-r--r--target/linux/ramips/patches-3.18/0010-MIPS-ralink-define-the-wmac-clock-on-rt3883.patch20
-rw-r--r--target/linux/ramips/patches-3.18/0011-MIPS-ralink-add-rt2880-wmac-clock.patch29
-rw-r--r--target/linux/ramips/patches-3.18/0015-MIPS-ralink-cleanup-early_printk.patch104
-rw-r--r--target/linux/ramips/patches-3.18/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch99
-rw-r--r--target/linux/ramips/patches-3.18/0019-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch300
-rw-r--r--target/linux/ramips/patches-3.18/0025-MIPS-ralink-allow-loading-irq-registers-from-the-dev.patch75
-rw-r--r--target/linux/ramips/patches-3.18/0026-MIPS-ralink-add-mt7628an-support.patch398
-rw-r--r--target/linux/ramips/patches-3.18/0027-serial-ralink-adds-mt7620-serial.patch23
-rw-r--r--target/linux/ramips/patches-3.18/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch22
-rw-r--r--target/linux/ramips/patches-3.18/0029-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch27
-rw-r--r--target/linux/ramips/patches-3.18/0030-pinctrl-ralink-add-pinctrl-driver.patch1404
-rw-r--r--target/linux/ramips/patches-3.18/0031-PCI-MIPS-adds-rt2880-pci-support.patch319
-rw-r--r--target/linux/ramips/patches-3.18/0038-USB-add-OHCI-EHCI-OF-binding.patch34
-rw-r--r--target/linux/ramips/patches-3.18/0044-mtd-add-chunked-read-io-to-m25p80.patch154
-rw-r--r--target/linux/ramips/patches-3.18/0059-USB-fix-dwc2.patch19
-rw-r--r--target/linux/ramips/patches-3.18/0063-cevt-rt3352.patch11
-rw-r--r--target/linux/ramips/patches-3.18/0064-MIPS-ralink-fix-clearing-the-illegal-access-interrup.patch31
-rw-r--r--target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch18
-rw-r--r--target/linux/ramips/patches-3.18/0067-disable_illacc.patch14
-rw-r--r--target/linux/ramips/patches-3.18/0068-non-pci-mt7620.patch12
-rw-r--r--target/linux/ramips/patches-3.18/0069-no-pm_poweroff.patch10
-rw-r--r--target/linux/ramips/patches-3.18/0072-mt7621-add-highmem.patch10
-rw-r--r--target/linux/ramips/patches-3.18/0301-mt7688-detect.patch114
-rw-r--r--target/linux/ramips/patches-3.18/0302-mt762x-vendor-id.patch22
-rw-r--r--target/linux/ramips/patches-3.18/0304-baud_250000.patch12
-rw-r--r--target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch (renamed from target/linux/ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patch)92
-rw-r--r--target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch (renamed from target/linux/ramips/patches-3.18/0013-MIPS-ralink-add-MT7621-defconfig.patch)10
-rw-r--r--target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch66
-rw-r--r--target/linux/ramips/patches-4.3/0004-MIPS-ralink-add-MT7621-pcie-driver.patch (renamed from target/linux/ramips/patches-3.18/0016-MIPS-ralink-add-MT7621-pcie-driver.patch)18
-rw-r--r--target/linux/ramips/patches-4.3/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch88
-rw-r--r--target/linux/ramips/patches-4.3/0006-MIPS-ralink-add-cpu-frequency-scaling.patch (renamed from target/linux/ramips/patches-3.18/0021-MIPS-ralink-add-cpu-frequency-scaling.patch)57
-rw-r--r--target/linux/ramips/patches-4.3/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch (renamed from target/linux/ramips/patches-3.18/0022-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch)15
-rw-r--r--target/linux/ramips/patches-4.3/0008-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch (renamed from target/linux/ramips/patches-3.18/0023-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch)17
-rw-r--r--target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch (renamed from target/linux/ramips/patches-3.18/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch)55
-rw-r--r--target/linux/ramips/patches-4.3/0010-arch-mips-ralink-add-spi1-clocks.patch (renamed from target/linux/ramips/patches-3.18/0051-SPI-ralink-add-Ralink-SoC-spi-clocks.patch)33
-rw-r--r--target/linux/ramips/patches-4.3/0011-arch-mips-ralink-unify-soc-detection.patch (renamed from target/linux/ramips/patches-3.18/0060-soc_type.patch)140
-rw-r--r--target/linux/ramips/patches-4.3/0012-arch-mips-fix-clock-jitter.patch26
-rw-r--r--target/linux/ramips/patches-4.3/0013-owrt-hack-fix-mt7688-cache-issue.patch33
-rw-r--r--target/linux/ramips/patches-4.3/0014-arch-mips-cleanup-cevt-rt3352.patch (renamed from target/linux/ramips/patches-3.18/0066-cevt.patch)77
-rw-r--r--target/linux/ramips/patches-4.3/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch30
-rw-r--r--target/linux/ramips/patches-4.3/0016-arch-mips-ralink-remove-non-PCI-check.patch27
-rw-r--r--target/linux/ramips/patches-4.3/0017-arch-mips-ralink-do-not-set-pm_poweroff.patch25
-rw-r--r--target/linux/ramips/patches-4.3/0018-arch-mips-ralink-reset-pci-prior-to-reboot.patch (renamed from target/linux/ramips/patches-3.18/0070-pci-reset.patch)15
-rw-r--r--target/linux/ramips/patches-4.3/0019-arch-mips-ralink-add-mt7621-cpu-feature-overrides.patch (renamed from target/linux/ramips/patches-3.18/0071-mt7621-add-cpu-feature-overrides.patch)17
-rw-r--r--target/linux/ramips/patches-4.3/0020-arch-mips-ralink-mt7628-fixes.patch (renamed from target/linux/ramips/patches-3.18/0300-mt7628_fixes.patch)71
-rw-r--r--target/linux/ramips/patches-4.3/0021-arch-mips-ralink-add-mt7688-detection.patch99
-rw-r--r--target/linux/ramips/patches-4.3/0022-arch-mips-ralink-proper-vendor-id-srtring.patch26
-rw-r--r--target/linux/ramips/patches-4.3/0023-arch-mips-ralink-unify-soc-id.patch90
-rw-r--r--target/linux/ramips/patches-4.3/0024-GPIO-add-named-gpio-exports.patch (renamed from target/linux/ramips/patches-3.18/0030-GPIO-add-named-gpio-exports.patch)99
-rw-r--r--target/linux/ramips/patches-4.3/0025-pinctrl-ralink-add-pinctrl-driver.patch538
-rw-r--r--target/linux/ramips/patches-4.3/0026-DT-Add-documentation-for-gpio-ralink.patch (renamed from target/linux/ramips/patches-3.18/0046-DT-Add-documentation-for-gpio-ralink.patch)10
-rw-r--r--target/linux/ramips/patches-4.3/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch (renamed from target/linux/ramips/patches-3.18/0047-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch)27
-rw-r--r--target/linux/ramips/patches-4.3/0028-GPIO-ralink-add-mt7621-gpio-controller.patch (renamed from target/linux/ramips/patches-3.18/0048-GPIO-ralink-add-mt7621-gpio-controller.patch)39
-rw-r--r--target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch (renamed from target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch)35
-rw-r--r--target/linux/ramips/patches-4.3/0030-USB-add-OHCI-EHCI-OF-binding.patch40
-rw-r--r--target/linux/ramips/patches-4.3/0031-uvc-add-iPassion-iP2970-support.patch (renamed from target/linux/ramips/patches-3.18/0057-uvc-add-iPassion-iP2970-support.patch)53
-rw-r--r--target/linux/ramips/patches-4.3/0032-USB-dwc2-add-device_reset.patch34
-rw-r--r--target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch (renamed from target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch)166
-rw-r--r--target/linux/ramips/patches-4.3/0034-NET-multi-phy-support.patch (renamed from target/linux/ramips/patches-3.18/0033-NET-multi-phy-support.patch)27
-rw-r--r--target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch (renamed from target/linux/ramips/patches-3.18/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch)26
-rw-r--r--target/linux/ramips/patches-4.3/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch (renamed from target/linux/ramips/patches-3.18/0041-mtd-fix-cfi-cmdset-0002-erase-status-check.patch)13
-rw-r--r--target/linux/ramips/patches-4.3/0037-mtd-cfi-cmdset-0002-force-word-write.patch (renamed from target/linux/ramips/patches-3.18/0042-mtd-cfi-cmdset-0002-force-word-write.patch)19
-rw-r--r--target/linux/ramips/patches-4.3/0038-mtd-ralink-add-mt7620-nand-driver.patch (renamed from target/linux/ramips/patches-3.18/0043-mtd-ralink-add-mt7620-nand-driver.patch)17
-rw-r--r--target/linux/ramips/patches-4.3/0039-mtd-add-mt7621-nand-support.patch (renamed from target/linux/ramips/patches-3.18/0045-mtd-add-mt7621-nand-support.patch)64
-rw-r--r--target/linux/ramips/patches-4.3/0040-nand-add-mtk-nand-hack-hook.patch (renamed from target/linux/ramips/patches-3.18/0075-mtk_nand_alloc_buffer.patch)95
-rw-r--r--target/linux/ramips/patches-4.3/0041-DT-Add-documentation-for-spi-rt2880.patch (renamed from target/linux/ramips/patches-3.18/0049-DT-Add-documentation-for-spi-rt2880.patch)10
-rw-r--r--target/linux/ramips/patches-4.3/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch (renamed from target/linux/ramips/patches-3.18/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch)24
-rw-r--r--target/linux/ramips/patches-4.3/0043-spi-add-mt7621-support.patch (renamed from target/linux/ramips/patches-3.18/0061-SPI-ralink-add-mt7621-SoC-spi-driver.patch)29
-rw-r--r--target/linux/ramips/patches-4.3/0044-i2c-MIPS-adds-ralink-I2C-driver.patch (renamed from target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch)25
-rw-r--r--target/linux/ramips/patches-4.3/0045-i2c-add-mt7621-driver.patch (renamed from target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch)27
-rw-r--r--target/linux/ramips/patches-4.3/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch (renamed from target/linux/ramips/patches-3.18/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch)46
-rw-r--r--target/linux/ramips/patches-4.3/0047-DMA-ralink-add-rt2880-dma-engine.patch (renamed from target/linux/ramips/patches-3.18/0054-DMA-ralink-add-rt2880-dma-engine.patch)47
-rw-r--r--target/linux/ramips/patches-4.3/0048-asoc-add-mt7620-support.patch (renamed from target/linux/ramips/patches-3.18/0055-asoc-add-mt7620-support.patch)40
-rw-r--r--target/linux/ramips/patches-4.3/0049-watchdog-add-MT7621-support.patch (renamed from target/linux/ramips/patches-3.18/0056-watchdog-add-MT7621-support.patch)28
-rw-r--r--target/linux/ramips/patches-4.3/0050-alsa-add-ralink-sdk-driver.patch (renamed from target/linux/ramips/patches-3.18/0303-alsa.patch)2125
-rw-r--r--target/linux/ramips/patches-4.3/0051-serial-add-ugly-custom-baud-rate-hack.patch27
-rw-r--r--target/linux/ramips/patches-4.3/0052-pwm-add-mediatek-support.patch (renamed from target/linux/ramips/patches-3.18/0065-mt7628-pww.patch)27
-rw-r--r--target/linux/ramips/patches-4.3/0053-gic.patch305
-rw-r--r--target/linux/ramips/patches-4.3/0054-mtd-add-chunked-read-io-to-m25p80.patch123
-rw-r--r--target/linux/ramips/patches-4.3/0100-mtd-split-remove-padding.patch (renamed from target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch)0
-rw-r--r--target/linux/ramips/patches-4.3/0101-mtd-add-rtn56u-support.patch (renamed from target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch)0
-rw-r--r--target/linux/ramips/patches-4.3/0103-MIPS-OWRTDTB.patch (renamed from target/linux/ramips/patches-3.18/0103-MIPS-OWRTDTB.patch)0
-rw-r--r--target/linux/ramips/patches-4.3/0104-fix_bootargs_handling.patch (renamed from target/linux/ramips/patches-3.18/0104-fix_bootargs_handling.patch)0
-rw-r--r--target/linux/ramips/patches-4.3/0200-linkit_bootstrap.patch (renamed from target/linux/ramips/patches-3.18/0200-linkit_bootstrap.patch)0
-rw-r--r--target/linux/ramips/rt288x/config-4.3 (renamed from target/linux/ramips/rt288x/config-3.18)54
-rw-r--r--target/linux/ramips/rt305x/config-4.3 (renamed from target/linux/ramips/rt305x/config-3.18)30
-rw-r--r--target/linux/ramips/rt3883/config-4.3 (renamed from target/linux/ramips/rt3883/config-3.18)38
105 files changed, 3943 insertions, 5439 deletions
diff --git a/target/linux/generic/patches-4.3/142-mtd-spi-nor-include-mtd.h-header-for-struct-mtd_info.patch b/target/linux/generic/patches-4.3/142-mtd-spi-nor-include-mtd.h-header-for-struct-mtd_info.patch
index f25c79c281..b0a064fb4e 100644
--- a/target/linux/generic/patches-4.3/142-mtd-spi-nor-include-mtd.h-header-for-struct-mtd_info.patch
+++ b/target/linux/generic/patches-4.3/142-mtd-spi-nor-include-mtd.h-header-for-struct-mtd_info.patch
@@ -17,8 +17,6 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
include/linux/mtd/spi-nor.h | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
-diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
-index 7bed974..fac3f6f 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -12,6 +12,7 @@
diff --git a/target/linux/ramips/Makefile b/target/linux/ramips/Makefile
index a92b287fcf..9d7bb5b6a8 100644
--- a/target/linux/ramips/Makefile
+++ b/target/linux/ramips/Makefile
@@ -10,10 +10,10 @@ ARCH:=mipsel
BOARD:=ramips
BOARDNAME:=Ralink RT288x/RT3xxx
SUBTARGETS:=rt305x mt7620 mt7621 mt7628 mt7688 rt3883 rt288x
-FEATURES:=squashfs gpio ubifs
+FEATURES:=squashfs gpio
MAINTAINER:=John Crispin <blogic@openwrt.org>
-KERNEL_PATCHVER:=3.18
+KERNEL_PATCHVER:=4.3
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi
index fd2e1008a3..801b075e27 100644
--- a/target/linux/ramips/dts/mt7621.dtsi
+++ b/target/linux/ramips/dts/mt7621.dtsi
@@ -77,7 +77,7 @@
reg = <0xc00 0x100>;
interrupt-parent = <&gic>;
- interrupts = <26>;
+ interrupts = <0 26 4>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -210,28 +210,27 @@
reg = <0x1E130000 4000>;
interrupt-parent = <&gic>;
- interrupts = <20>;
+ interrupts = <0 20 4>;
};
xhci@1E1C0000 {
- status = "disabled";
+ status = "okay";
compatible = "xhci-platform";
reg = <0x1E1C0000 4000>;
interrupt-parent = <&gic>;
- interrupts = <22>;
+ interrupts = <0 22 4>;
};
- gic: gic@1fbc0000 {
- #address-cells = <0>;
- #interrupt-cells = <1>;
+ gic: interrupt-controller@1fbc0000 {
+ compatible = "mti,gic";
+ reg = <0x1fbc0000 0x80>;
+
interrupt-controller;
- compatible = "ralink,mt7621-gic";
- reg = < 0x1fbc0000 0x80 /* gic */
- 0x1fbf0000 0x8000 /* cpc */
- 0x1fbf8000 0x8000 /* gpmc */
- >;
+ #interrupt-cells = <3>;
+
+ mti,reserved-cpu-vectors = <7>;
};
nand@1e003000 {
@@ -274,7 +273,7 @@
reset-names = "fe", "eth";
interrupt-parent = <&gic>;
- interrupts = <3>;
+ interrupts = <0 3 4>;
mdio-bus {
#address-cells = <1>;
@@ -291,7 +290,7 @@
compatible = "ralink,mt7620a-gsw";
reg = <0x1e110000 8000>;
interrupt-parent = <&gic>;
- interrupts = <23>;
+ interrupts = <0 23 4>;
};
pcie@1e140000 {
@@ -313,6 +312,11 @@
0x01000000 0 0x00000000 0x1e160000 0 0x00010000 /* io space */
>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 4 4
+ 0 24 4
+ 0 25 4>;
+
status = "okay";
pcie0 {
diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
index 55d5729f43..e564dd81e5 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/esw_rt3052.c
@@ -611,7 +611,7 @@ static void esw_hw_init(struct rt305x_esw *esw)
rt305x_mii_write(esw, 0, 29, 0x598b);
/* select local register */
rt305x_mii_write(esw, 0, 31, 0x8000);
- } else if (ralink_soc == MT762X_SOC_MT7628AN) {
+ } else if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688) {
int i;
// u32 phy_val;
u32 val;
@@ -1042,7 +1042,7 @@ esw_get_port_tr_badgood(struct switch_dev *dev,
int shift = attr->id == RT5350_ESW_ATTR_PORT_TR_GOOD ? 0 : 16;
u32 reg;
- if ((ralink_soc != RT305X_SOC_RT5350) && (ralink_soc != MT762X_SOC_MT7628AN))
++ if ((ralink_soc != RT305X_SOC_RT5350) && (ralink_soc != MT762X_SOC_MT7628AN) && (ralink_soc != MT762X_SOC_MT7688))
return -EINVAL;
if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c
index 0f3009cc73..5bc9b58336 100644
--- a/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c
+++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c
@@ -575,13 +575,15 @@ static int fe_tx_map_dma(struct sk_buff *skb, struct net_device *dev,
txd.txd4 |= TX_DMA_CHKSUM;
/* VLAN header offload */
- if (vlan_tx_tag_present(skb)) {
+ if (skb_vlan_tag_present(skb)) {
+ u16 tag = skb_vlan_tag_get(skb);
+
if (IS_ENABLED(CONFIG_SOC_MT7621))
- txd.txd4 |= TX_DMA_INS_VLAN_MT7621 | vlan_tx_tag_get(skb);
+ txd.txd4 |= TX_DMA_INS_VLAN_MT7621 | tag;
else
txd.txd4 |= TX_DMA_INS_VLAN |
- ((vlan_tx_tag_get(skb) >> VLAN_PRIO_SHIFT) << 4) |
- (vlan_tx_tag_get(skb) & 0xF);
+ ((tag >> VLAN_PRIO_SHIFT) << 4) |
+ (tag & 0xF);
}
/* TSO: fill MSS info in tcp checksum field */
@@ -711,8 +713,7 @@ static inline int fe_skb_padto(struct sk_buff *skb, struct fe_priv *priv) {
if ((priv->flags & FE_FLAG_PADDING_64B) &&
!(priv->flags & FE_FLAG_PADDING_BUG))
return ret;
-
- if (vlan_tx_tag_present(skb))
+ if (skb_vlan_tag_present(skb))
len = ETH_ZLEN;
else if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
len = VLAN_ETH_ZLEN;
@@ -999,6 +1000,8 @@ static int fe_poll(struct napi_struct *napi, int budget)
napi_complete(napi);
fe_int_enable(tx_intr | rx_intr);
+ } else {
+ rx_done = budget;
}
poll_again:
diff --git a/target/linux/ramips/mt7620/config-3.18 b/target/linux/ramips/mt7620/config-4.3
index 5dbfaa262f..bae003a37c 100644
--- a/target/linux/ramips/mt7620/config-3.18
+++ b/target/linux/ramips/mt7620/config-4.3
@@ -1,19 +1,21 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_AT803X_PHY=y
-CONFIG_ICPLUS_PHY=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
+CONFIG_CEVT_SYSTICK_QUIRK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKEVT_RT3352=y
CONFIG_CLKSRC_MMIO=y
@@ -36,22 +38,24 @@ CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_DTB_MT7620A_EVAL is not set
-# CONFIG_DTB_MT7628AN_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
@@ -63,6 +67,7 @@ CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
@@ -84,6 +89,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
@@ -93,21 +99,28 @@ CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
+CONFIG_ICPLUS_PHY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
+CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
+# CONFIG_MACH_INGENIC is not set
+# CONFIG_MACH_LOONGSON32 is not set
+# CONFIG_MACH_LOONGSON64 is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_NO_APPENDED_DTB=y
+# CONFIG_MIPS_RAW_APPENDED_DTB is not set
+CONFIG_MIPS_SPRAM=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MT7621_WDT is not set
# CONFIG_MTD_CFI_INTELEXT is not set
@@ -144,36 +157,37 @@ CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHY_RALINK_USB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
-# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK=y
-# CONFIG_RALINK_ILL_ACC is not set
-CONFIG_RALINK_USBPHY=y
CONFIG_RALINK_WDT=y
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SG_SPLIT is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SOC_MT7620=y
-# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
# CONFIG_SOC_RT305X is not set
# CONFIG_SOC_RT3883 is not set
-CONFIG_SND_MT76XX_SOC_MT7620=y
-# CONFIG_SND_MT76XX_SOC_MT7628 is not set
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MT7621 is not set
CONFIG_SPI_RT2880=y
+CONFIG_SRCU=y
+# CONFIG_SUNXI_SRAM is not set
CONFIG_SWCONFIG=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
@@ -182,7 +196,6 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_USB_PHY=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/ramips/mt7621/config-3.18 b/target/linux/ramips/mt7621/config-4.3
index 8861795854..3657460f9b 100644
--- a/target/linux/ramips/mt7621/config-3.18
+++ b/target/linux/ramips/mt7621/config-4.3
@@ -1,17 +1,17 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_BOARD_SCACHE=y
-CONFIG_BOUNCE=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_CEVT_GIC is not set
CONFIG_CEVT_R4K=y
# CONFIG_CEVT_SYSTICK_QUIRK is not set
CONFIG_CLKDEV_LOOKUP=y
@@ -50,11 +50,12 @@ CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
@@ -66,6 +67,7 @@ CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
@@ -87,6 +89,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
@@ -96,35 +99,39 @@ CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HIGHMEM=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_GIC=y
+CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
+# CONFIG_MACH_INGENIC is not set
+# CONFIG_MACH_LOONGSON32 is not set
+# CONFIG_MACH_LOONGSON64 is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
CONFIG_MIPS_CM=y
CONFIG_MIPS_CMP=y
CONFIG_MIPS_CPU_SCACHE=y
+CONFIG_MIPS_GIC=y
CONFIG_MIPS_GIC_IPI=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=6
-CONFIG_MIPS_L1_CACHE_SHIFT_6=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
CONFIG_MIPS_MT=y
CONFIG_MIPS_MT_FPAFF=y
CONFIG_MIPS_MT_SMP=y
+CONFIG_MIPS_NO_APPENDED_DTB=y
CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
+# CONFIG_MIPS_RAW_APPENDED_DTB is not set
+CONFIG_MIPS_SPRAM=y
# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_MTK_MTD_NAND=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MT7621_WDT=y
# CONFIG_MTD_CFI_INTELEXT is not set
@@ -171,6 +178,7 @@ CONFIG_PCI=y
CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
# CONFIG_PHY_RALINK_USB is not set
CONFIG_PINCTRL=y
@@ -178,11 +186,7 @@ CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_GPIO=y
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_POWER_RESET_LTC2952 is not set
-# CONFIG_POWER_RESET_SYSCON is not set
CONFIG_POWER_SUPPLY=y
-# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK=y
# CONFIG_RALINK_WDT is not set
CONFIG_RCU_STALL_COMMON=y
@@ -190,10 +194,13 @@ CONFIG_RESET_CONTROLLER=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTC_CLASS=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_INFO is not set
CONFIG_SCHED_SMT=y
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SG_SPLIT is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLUB_CPU_PARTIAL=y
@@ -208,15 +215,17 @@ CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MT7621=y
# CONFIG_SPI_RT2880 is not set
+CONFIG_SRCU=y
CONFIG_STOP_MACHINE=y
+# CONFIG_SUNXI_SRAM is not set
CONFIG_SWCONFIG=y
CONFIG_SYNC_R4K=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
CONFIG_SYS_SUPPORTS_MIPS_CMP=y
diff --git a/target/linux/ramips/mt7628/config-3.18 b/target/linux/ramips/mt7628/config-4.3
index 9ab31acdc3..35bfc97741 100644
--- a/target/linux/ramips/mt7628/config-3.18
+++ b/target/linux/ramips/mt7628/config-4.3
@@ -1,18 +1,21 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_AT803X_PHY=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
+CONFIG_CEVT_SYSTICK_QUIRK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKEVT_RT3352=y
CONFIG_CLKSRC_MMIO=y
@@ -35,6 +38,8 @@ CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
@@ -44,12 +49,13 @@ CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
@@ -61,6 +67,7 @@ CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
@@ -82,6 +89,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
@@ -91,22 +99,28 @@ CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
CONFIG_ICPLUS_PHY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
+CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
+# CONFIG_MACH_INGENIC is not set
+# CONFIG_MACH_LOONGSON32 is not set
+# CONFIG_MACH_LOONGSON64 is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_NO_APPENDED_DTB=y
+# CONFIG_MIPS_RAW_APPENDED_DTB is not set
+CONFIG_MIPS_SPRAM=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MT7621_WDT=y
# CONFIG_MTD_CFI_INTELEXT is not set
@@ -141,36 +155,37 @@ CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHY_RALINK_USB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
-# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK=y
-# CONFIG_RALINK_ILL_ACC is not set
-CONFIG_RALINK_USBPHY=y
# CONFIG_RALINK_WDT is not set
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SG_SPLIT is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SOC_MT7620=y
-# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
# CONFIG_SOC_RT305X is not set
# CONFIG_SOC_RT3883 is not set
-# CONFIG_SND_MT76XX_SOC_MT7620 is not set
-CONFIG_SND_MT76XX_SOC_MT7628=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MT7621=y
# CONFIG_SPI_RT2880 is not set
+CONFIG_SRCU=y
+# CONFIG_SUNXI_SRAM is not set
CONFIG_SWCONFIG=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
@@ -179,7 +194,6 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_USB_PHY=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/ramips/mt7688/config-3.18 b/target/linux/ramips/mt7688/config-4.3
index 27eab9a4fe..01abcf10c7 100644
--- a/target/linux/ramips/mt7688/config-3.18
+++ b/target/linux/ramips/mt7688/config-4.3
@@ -1,13 +1,15 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_AT803X_PHY=y
@@ -36,6 +38,8 @@ CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
@@ -45,12 +49,13 @@ CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
@@ -62,6 +67,7 @@ CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
@@ -83,6 +89,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
@@ -92,24 +99,29 @@ CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
CONFIG_ICPLUS_PHY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
+CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
-CONFIG_LINKIT_BOOTSTRAP=y
+# CONFIG_MACH_INGENIC is not set
+# CONFIG_MACH_LOONGSON32 is not set
+# CONFIG_MACH_LOONGSON64 is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
CONFIG_MIPS_FPU_EMULATOR=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_NO_APPENDED_DTB=y
+# CONFIG_MIPS_RAW_APPENDED_DTB is not set
+CONFIG_MIPS_SPRAM=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MT7621_WDT=y
# CONFIG_MTD_CFI_INTELEXT is not set
@@ -144,40 +156,42 @@ CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHY_RALINK_USB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
-# CONFIG_PREEMPT_RCU is not set
CONFIG_PWM=y
-# CONFIG_PWM_FSL_FTM is not set
CONFIG_PWM_MEDIATEK=y
CONFIG_PWM_SYSFS=y
CONFIG_RALINK=y
# CONFIG_RALINK_WDT is not set
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SG_SPLIT is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SOC_MT7620=y
-# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
# CONFIG_SOC_RT305X is not set
# CONFIG_SOC_RT3883 is not set
-# CONFIG_SND_MT76XX_SOC_MT7620 is not set
-CONFIG_SND_MT76XX_SOC_MT7628=y
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MT7621=y
# CONFIG_SPI_RT2880 is not set
CONFIG_SPI_SPIDEV=y
+CONFIG_SRCU=y
+# CONFIG_SUNXI_SRAM is not set
CONFIG_SWCONFIG=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
diff --git a/target/linux/ramips/patches-3.18/0001-MIPS-ralink-add-verbose-pmu-info.patch b/target/linux/ramips/patches-3.18/0001-MIPS-ralink-add-verbose-pmu-info.patch
deleted file mode 100644
index 5bf90c6fee..0000000000
--- a/target/linux/ramips/patches-3.18/0001-MIPS-ralink-add-verbose-pmu-info.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 453850d315070678245f61202ae343153589e5a6 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:16:50 +0100
-Subject: [PATCH 01/57] MIPS: ralink: add verbose pmu info
-
-Print the PMU and LDO settings on boot.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/mt7620.c | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -20,6 +20,22 @@
-
- #include "common.h"
-
-+/* analog */
-+#define PMU0_CFG 0x88
-+#define PMU_SW_SET BIT(28)
-+#define A_DCDC_EN BIT(24)
-+#define A_SSC_PERI BIT(19)
-+#define A_SSC_GEN BIT(18)
-+#define A_SSC_M 0x3
-+#define A_SSC_S 16
-+#define A_DLY_M 0x7
-+#define A_DLY_S 8
-+#define A_VTUNE_M 0xff
-+
-+/* digital */
-+#define PMU1_CFG 0x8C
-+#define DIG_SW_SEL BIT(25)
-+
- /* does the board have sdram or ddram */
- static int dram_type;
-
-@@ -339,6 +355,8 @@ void prom_soc_init(struct ralink_soc_inf
- u32 n1;
- u32 rev;
- u32 cfg0;
-+ u32 pmu0;
-+ u32 pmu1;
-
- n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
- n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-@@ -386,4 +404,12 @@ void prom_soc_init(struct ralink_soc_inf
- BUG();
- }
- soc_info->mem_base = MT7620_DRAM_BASE;
-+
-+ pmu0 = __raw_readl(sysc + PMU0_CFG);
-+ pmu1 = __raw_readl(sysc + PMU1_CFG);
-+
-+ pr_info("Analog PMU set to %s control\n",
-+ (pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
-+ pr_info("Digital PMU set to %s control\n",
-+ (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
- }
diff --git a/target/linux/ramips/patches-3.18/0002-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch b/target/linux/ramips/patches-3.18/0002-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch
deleted file mode 100644
index 237ba00a5a..0000000000
--- a/target/linux/ramips/patches-3.18/0002-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From 1751f28d4779df83cc793c9d7ff75485c0ceaa23 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 04:53:02 +0000
-Subject: [PATCH 02/57] MIPS: ralink: add a helper for reading the ECO version
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-ralink/mt7620.h | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -105,4 +105,9 @@
- #define MT7620_GPIO_MODE_EPHY BIT(15)
- #define MT7620_GPIO_MODE_WDT BIT(22)
-
-+static inline int mt7620_get_eco(void)
-+{
-+ return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK;
-+}
-+
- #endif
diff --git a/target/linux/ramips/patches-3.18/0003-MIPS-ralink-add-rt_sysc_m32-helper.patch b/target/linux/ramips/patches-3.18/0003-MIPS-ralink-add-rt_sysc_m32-helper.patch
deleted file mode 100644
index 66126e6889..0000000000
--- a/target/linux/ramips/patches-3.18/0003-MIPS-ralink-add-rt_sysc_m32-helper.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 0f0f041cd6a05eb865e391155d3299bb55ff00e3 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 19 May 2013 00:42:23 +0200
-Subject: [PATCH 03/57] MIPS: ralink: add rt_sysc_m32 helper
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-ralink/ralink_regs.h | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
-+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
-@@ -26,6 +26,13 @@ static inline u32 rt_sysc_r32(unsigned r
- return __raw_readl(rt_sysc_membase + reg);
- }
-
-+static inline void rt_sysc_m32(u32 clr, u32 set, unsigned reg)
-+{
-+ u32 val = rt_sysc_r32(reg) & ~clr;
-+
-+ __raw_writel(val | set, rt_sysc_membase + reg);
-+}
-+
- static inline void rt_memc_w32(u32 val, unsigned reg)
- {
- __raw_writel(val, rt_memc_membase + reg);
diff --git a/target/linux/ramips/patches-3.18/0004-MIPS-ralink-adds-a-bootrom-dumper-module.patch b/target/linux/ramips/patches-3.18/0004-MIPS-ralink-adds-a-bootrom-dumper-module.patch
deleted file mode 100644
index 049a876961..0000000000
--- a/target/linux/ramips/patches-3.18/0004-MIPS-ralink-adds-a-bootrom-dumper-module.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From af03898c74172ab16d610f3eeaa65f66401eb7db Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 21 May 2013 15:50:31 +0200
-Subject: [PATCH 04/57] MIPS: ralink: adds a bootrom dumper module
-
-This patch adds a trivial driver that allows userland to extract the bootrom of
-a SoC via debugfs.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Makefile | 2 ++
- arch/mips/ralink/bootrom.c | 48 ++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 50 insertions(+)
- create mode 100644 arch/mips/ralink/bootrom.c
-
---- a/arch/mips/ralink/Makefile
-+++ b/arch/mips/ralink/Makefile
-@@ -16,3 +16,5 @@ obj-$(CONFIG_SOC_RT3883) += rt3883.o
- obj-$(CONFIG_SOC_MT7620) += mt7620.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-+
-+obj-$(CONFIG_DEBUG_FS) += bootrom.o
---- /dev/null
-+++ b/arch/mips/ralink/bootrom.c
-@@ -0,0 +1,48 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/debugfs.h>
-+#include <linux/seq_file.h>
-+
-+#define BOOTROM_OFFSET 0x10118000
-+#define BOOTROM_SIZE 0x8000
-+
-+static void __iomem *membase = (void __iomem*) KSEG1ADDR(BOOTROM_OFFSET);
-+
-+static int bootrom_show(struct seq_file *s, void *unused)
-+{
-+ seq_write(s, membase, BOOTROM_SIZE);
-+
-+ return 0;
-+}
-+
-+static int bootrom_open(struct inode *inode, struct file *file)
-+{
-+ return single_open(file, bootrom_show, NULL);
-+}
-+
-+static const struct file_operations bootrom_file_ops = {
-+ .open = bootrom_open,
-+ .read = seq_read,
-+ .llseek = seq_lseek,
-+ .release = single_release,
-+};
-+
-+static int bootrom_setup(void)
-+{
-+ if (!debugfs_create_file("bootrom", 0444,
-+ NULL, NULL, &bootrom_file_ops)) {
-+ pr_err("Failed to create bootrom debugfs file\n");
-+
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+postcore_initcall(bootrom_setup);
diff --git a/target/linux/ramips/patches-3.18/0005-MIPS-ralink-add-illegal-access-driver.patch b/target/linux/ramips/patches-3.18/0005-MIPS-ralink-add-illegal-access-driver.patch
deleted file mode 100644
index fa9cd21b03..0000000000
--- a/target/linux/ramips/patches-3.18/0005-MIPS-ralink-add-illegal-access-driver.patch
+++ /dev/null
@@ -1,115 +0,0 @@
-From 60999174904c731e55992a4087999bbd4e5f2051 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Thu, 16 May 2013 23:28:23 +0200
-Subject: [PATCH 05/57] MIPS: ralink: add illegal access driver
-
-these SoCs have a special irq that fires upon an illegal memmory access.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/Makefile | 2 +
- arch/mips/ralink/ill_acc.c | 87 ++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 89 insertions(+)
- create mode 100644 arch/mips/ralink/ill_acc.c
-
---- a/arch/mips/ralink/Makefile
-+++ b/arch/mips/ralink/Makefile
-@@ -10,6 +10,8 @@ obj-y := prom.o of.o reset.o clk.o irq.o
-
- obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
-
-+obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
-+
- obj-$(CONFIG_SOC_RT288X) += rt288x.o
- obj-$(CONFIG_SOC_RT305X) += rt305x.o
- obj-$(CONFIG_SOC_RT3883) += rt3883.o
---- /dev/null
-+++ b/arch/mips/ralink/ill_acc.c
-@@ -0,0 +1,87 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_irq.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+
-+#define REG_ILL_ACC_ADDR 0x10
-+#define REG_ILL_ACC_TYPE 0x14
-+
-+#define ILL_INT_STATUS BIT(31)
-+#define ILL_ACC_WRITE BIT(30)
-+#define ILL_ACC_LEN_M 0xff
-+#define ILL_ACC_OFF_M 0xf
-+#define ILL_ACC_OFF_S 16
-+#define ILL_ACC_ID_M 0x7
-+#define ILL_ACC_ID_S 8
-+
-+#define DRV_NAME "ill_acc"
-+
-+static const char *ill_acc_ids[] = {
-+ "cpu", "dma", "ppe", "pdma rx","pdma tx", "pci/e", "wmac", "usb",
-+};
-+
-+static irqreturn_t ill_acc_irq_handler(int irq, void *_priv)
-+{
-+ struct device *dev = (struct device *) _priv;
-+ u32 addr = rt_memc_r32(REG_ILL_ACC_ADDR);
-+ u32 type = rt_memc_r32(REG_ILL_ACC_TYPE);
-+
-+ dev_err(dev, "illegal %s access from %s - addr:0x%08x offset:%d len:%d\n",
-+ (type & ILL_ACC_WRITE) ? ("write") : ("read"),
-+ ill_acc_ids[(type >> ILL_ACC_ID_S) & ILL_ACC_ID_M],
-+ addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
-+ type & ILL_ACC_LEN_M);
-+
-+ rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __init ill_acc_of_setup(void)
-+{
-+ struct platform_device *pdev;
-+ struct device_node *np;
-+ int irq;
-+
-+ /* somehow this driver breaks on RT5350 */
-+ if (of_machine_is_compatible("ralink,rt5350-soc"))
-+ return -EINVAL;
-+
-+ np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-memc");
-+ if (!np)
-+ return -EINVAL;
-+
-+ pdev = of_find_device_by_node(np);
-+ if (!pdev) {
-+ pr_err("%s: failed to lookup pdev\n", np->name);
-+ return -EINVAL;
-+ }
-+
-+ irq = irq_of_parse_and_map(np, 0);
-+ if (!irq) {
-+ dev_err(&pdev->dev, "failed to get irq\n");
-+ return -EINVAL;
-+ }
-+
-+ if (request_irq(irq, ill_acc_irq_handler, 0, "ill_acc", &pdev->dev)) {
-+ dev_err(&pdev->dev, "failed to request irq\n");
-+ return -EINVAL;
-+ }
-+
-+ rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
-+
-+ dev_info(&pdev->dev, "irq registered\n");
-+
-+ return 0;
-+}
-+
-+arch_initcall(ill_acc_of_setup);
diff --git a/target/linux/ramips/patches-3.18/0006-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch b/target/linux/ramips/patches-3.18/0006-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch
deleted file mode 100644
index 8085e4be68..0000000000
--- a/target/linux/ramips/patches-3.18/0006-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 979ad9f0324ad8fa5eb4a00b57d9feb061aa3200 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 04:38:07 +0000
-Subject: [PATCH 06/57] MIPS: ralink: add missing clk_set_rate() to clk.c
-
-This function was missing causing allmod to fail.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/clk.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/arch/mips/ralink/clk.c
-+++ b/arch/mips/ralink/clk.c
-@@ -56,6 +56,12 @@ unsigned long clk_get_rate(struct clk *c
- }
- EXPORT_SYMBOL_GPL(clk_get_rate);
-
-+int clk_set_rate(struct clk *clk, unsigned long rate)
-+{
-+ return -1;
-+}
-+EXPORT_SYMBOL_GPL(clk_set_rate);
-+
- void __init plat_time_init(void)
- {
- struct clk *clk;
diff --git a/target/linux/ramips/patches-3.18/0007-MIPS-ralink-add-support-for-MT7620n.patch b/target/linux/ramips/patches-3.18/0007-MIPS-ralink-add-support-for-MT7620n.patch
deleted file mode 100644
index 1d507101f3..0000000000
--- a/target/linux/ramips/patches-3.18/0007-MIPS-ralink-add-support-for-MT7620n.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From efc0f99cebcab21dbabcc634b9dbb963bbbbcab8 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:23:36 +0100
-Subject: [PATCH 07/57] MIPS: ralink: add support for MT7620n
-
-This is the small version of MT7620a.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-ralink/mt7620.h | 7 ++-----
- arch/mips/ralink/mt7620.c | 19 ++++++++++++-------
- 2 files changed, 14 insertions(+), 12 deletions(-)
-
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -25,11 +25,8 @@
- #define SYSC_REG_CPLL_CONFIG0 0x54
- #define SYSC_REG_CPLL_CONFIG1 0x58
-
--#define MT7620N_CHIP_NAME0 0x33365452
--#define MT7620N_CHIP_NAME1 0x20203235
--
--#define MT7620A_CHIP_NAME0 0x3637544d
--#define MT7620A_CHIP_NAME1 0x20203032
-+#define MT7620_CHIP_NAME0 0x3637544d
-+#define MT7620_CHIP_NAME1 0x20203032
-
- #define SYSCFG0_XTAL_FREQ_SEL BIT(6)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -357,22 +357,27 @@ void prom_soc_init(struct ralink_soc_inf
- u32 cfg0;
- u32 pmu0;
- u32 pmu1;
-+ u32 bga;
-
- n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
- n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
-+ bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
-
-- if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
-- name = "MT7620N";
-- soc_info->compatible = "ralink,mt7620n-soc";
-- } else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
-+ if (n0 != MT7620_CHIP_NAME0 || n1 != MT7620_CHIP_NAME1)
-+ panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
-+
-+ if (bga) {
- name = "MT7620A";
- soc_info->compatible = "ralink,mt7620a-soc";
- } else {
-- panic("mt7620: unknown SoC, n0:%08x n1:%08x", n0, n1);
-+ name = "MT7620N";
-+ soc_info->compatible = "ralink,mt7620n-soc";
-+#ifdef CONFIG_PCI
-+ panic("mt7620n is only supported for non pci kernels");
-+#endif
- }
-
-- rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
--
- snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
- "Ralink %s ver:%u eco:%u",
- name,
diff --git a/target/linux/ramips/patches-3.18/0008-MIPS-ralink-allow-manual-memory-override.patch b/target/linux/ramips/patches-3.18/0008-MIPS-ralink-allow-manual-memory-override.patch
deleted file mode 100644
index 1870d13efc..0000000000
--- a/target/linux/ramips/patches-3.18/0008-MIPS-ralink-allow-manual-memory-override.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 071e97587a291d3a5bbd614a425f46b7f90310aa Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 04:40:48 +0000
-Subject: [PATCH 08/57] MIPS: ralink: allow manual memory override
-
-RT5350 relies on the bootloader setting up the memc correctly.
-On sme boards the setup is incorrect leading to 32 MB being available but only 16 being recognized. Allow these boards to manually override the memory range
-.
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/of.c | 16 +++++++++++++++-
- 1 file changed, 15 insertions(+), 1 deletion(-)
-
---- a/arch/mips/ralink/of.c
-+++ b/arch/mips/ralink/of.c
-@@ -53,6 +53,17 @@ void __init device_tree_init(void)
- unflatten_and_copy_device_tree();
- }
-
-+static int memory_dtb;
-+
-+static int __init early_init_dt_find_memory(unsigned long node, const char *uname,
-+ int depth, void *data)
-+{
-+ if (depth == 1 && !strcmp(uname, "memory@0"))
-+ memory_dtb = 1;
-+
-+ return 0;
-+}
-+
- void __init plat_mem_setup(void)
- {
- set_io_port_base(KSEG1);
-@@ -63,7 +74,10 @@ void __init plat_mem_setup(void)
- */
- __dt_setup_arch(__dtb_start);
-
-- if (soc_info.mem_size)
-+ of_scan_flat_dt(early_init_dt_find_memory, NULL);
-+ if (memory_dtb)
-+ of_scan_flat_dt(early_init_dt_scan_memory, NULL);
-+ else if (soc_info.mem_size)
- add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
- BOOT_MEM_RAM);
- else
diff --git a/target/linux/ramips/patches-3.18/0009-MIPS-ralink-define-the-wmac-clock-on-mt7620.patch b/target/linux/ramips/patches-3.18/0009-MIPS-ralink-define-the-wmac-clock-on-mt7620.patch
deleted file mode 100644
index 225afd503c..0000000000
--- a/target/linux/ramips/patches-3.18/0009-MIPS-ralink-define-the-wmac-clock-on-mt7620.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From 1cb19fe02c830e278b91498edea09fbda37c4a21 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 10:13:43 +0100
-Subject: [PATCH 09/57] MIPS: ralink: define the wmac clock on mt7620
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/mt7620.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -336,6 +336,7 @@ void __init ralink_clk_init(void)
- ralink_clk_add("10000500.uart", periph_rate);
- ralink_clk_add("10000b00.spi", sys_rate);
- ralink_clk_add("10000c00.uartlite", periph_rate);
-+ ralink_clk_add("10180000.wmac", xtal_rate);
- }
-
- void __init ralink_of_remap(void)
diff --git a/target/linux/ramips/patches-3.18/0010-MIPS-ralink-define-the-wmac-clock-on-rt3883.patch b/target/linux/ramips/patches-3.18/0010-MIPS-ralink-define-the-wmac-clock-on-rt3883.patch
deleted file mode 100644
index 2de066be4b..0000000000
--- a/target/linux/ramips/patches-3.18/0010-MIPS-ralink-define-the-wmac-clock-on-rt3883.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From 1f17cf131fc2ae7fa2651dbe6a622dd125939718 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 10:14:30 +0100
-Subject: [PATCH 10/57] MIPS: ralink: define the wmac clock on rt3883
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/rt3883.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/ralink/rt3883.c
-+++ b/arch/mips/ralink/rt3883.c
-@@ -204,6 +204,7 @@ void __init ralink_clk_init(void)
- ralink_clk_add("10000b00.spi", sys_rate);
- ralink_clk_add("10000c00.uartlite", 40000000);
- ralink_clk_add("10100000.ethernet", sys_rate);
-+ ralink_clk_add("10180000.wmac", 40000000);
- }
-
- void __init ralink_of_remap(void)
diff --git a/target/linux/ramips/patches-3.18/0011-MIPS-ralink-add-rt2880-wmac-clock.patch b/target/linux/ramips/patches-3.18/0011-MIPS-ralink-add-rt2880-wmac-clock.patch
deleted file mode 100644
index 76d2f6a354..0000000000
--- a/target/linux/ramips/patches-3.18/0011-MIPS-ralink-add-rt2880-wmac-clock.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From bf4f5250117cd65a78903b8ce302499806416ed1 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Mon, 4 Aug 2014 09:52:22 +0200
-Subject: [PATCH 11/57] MIPS: ralink: add rt2880 wmac clock
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/rt288x.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/mips/ralink/rt288x.c
-+++ b/arch/mips/ralink/rt288x.c
-@@ -76,7 +76,7 @@ struct ralink_pinmux rt_gpio_pinmux = {
-
- void __init ralink_clk_init(void)
- {
-- unsigned long cpu_rate;
-+ unsigned long cpu_rate, wmac_rate = 40000000;
- u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
- t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
-
-@@ -101,6 +101,7 @@ void __init ralink_clk_init(void)
- ralink_clk_add("300500.uart", cpu_rate / 2);
- ralink_clk_add("300c00.uartlite", cpu_rate / 2);
- ralink_clk_add("400000.ethernet", cpu_rate / 2);
-+ ralink_clk_add("480000.wmac", wmac_rate);
- }
-
- void __init ralink_of_remap(void)
diff --git a/target/linux/ramips/patches-3.18/0015-MIPS-ralink-cleanup-early_printk.patch b/target/linux/ramips/patches-3.18/0015-MIPS-ralink-cleanup-early_printk.patch
deleted file mode 100644
index 1e5c90b6c8..0000000000
--- a/target/linux/ramips/patches-3.18/0015-MIPS-ralink-cleanup-early_printk.patch
+++ /dev/null
@@ -1,104 +0,0 @@
-From e410b0069ee7c318a5b556f39b8b16814330a208 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 24 Jan 2014 17:01:17 +0100
-Subject: [PATCH 15/57] MIPS: ralink: cleanup early_printk
-
-Add support for the new MT7621/8 SoC and kill ifdefs.
-Cleanup some whitespace error while we are at it.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/early_printk.c | 45 ++++++++++++++++++++++++++-------------
- 1 file changed, 30 insertions(+), 15 deletions(-)
-
---- a/arch/mips/ralink/early_printk.c
-+++ b/arch/mips/ralink/early_printk.c
-@@ -12,21 +12,26 @@
- #include <asm/addrspace.h>
-
- #ifdef CONFIG_SOC_RT288X
--#define EARLY_UART_BASE 0x300c00
-+#define EARLY_UART_BASE 0x300c00
-+#define CHIPID_BASE 0x300004
-+#elif defined(CONFIG_SOC_MT7621)
-+#define EARLY_UART_BASE 0x1E000c00
-+#define CHIPID_BASE 0x1E000004
- #else
--#define EARLY_UART_BASE 0x10000c00
-+#define EARLY_UART_BASE 0x10000c00
-+#define CHIPID_BASE 0x10000004
- #endif
-
--#define UART_REG_RX 0x00
--#define UART_REG_TX 0x04
--#define UART_REG_IER 0x08
--#define UART_REG_IIR 0x0c
--#define UART_REG_FCR 0x10
--#define UART_REG_LCR 0x14
--#define UART_REG_MCR 0x18
--#define UART_REG_LSR 0x1c
-+#define MT7628_CHIP_NAME1 0x20203832
-+
-+#define UART_REG_TX 0x04
-+#define UART_REG_LCR 0x0c
-+#define UART_REG_LSR 0x14
-+#define UART_REG_LSR_RT2880 0x1c
-
- static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
-+static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE);
-+static int init_complete;
-
- static inline void uart_w32(u32 val, unsigned reg)
- {
-@@ -38,11 +43,46 @@ static inline u32 uart_r32(unsigned reg)
- return __raw_readl(uart_membase + reg);
- }
-
-+static inline int soc_is_mt7628(void)
-+{
-+ return IS_ENABLED(CONFIG_SOC_MT7620) &&
-+ (__raw_readl(chipid_membase) == MT7628_CHIP_NAME1);
-+}
-+
-+static inline void find_uart_base(void)
-+{
-+ int i;
-+
-+ if (!soc_is_mt7628())
-+ return;
-+
-+ for (i = 0; i < 3; i++) {
-+ u32 reg = uart_r32(UART_REG_LCR + (0x100 * i));
-+
-+ if (!reg)
-+ continue;
-+
-+ uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE + (0x100 * i));
-+ break;
-+ }
-+}
-+
- void prom_putchar(unsigned char ch)
- {
-- while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
-- ;
-- uart_w32(ch, UART_REG_TX);
-- while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
-- ;
-+ if (!init_complete) {
-+ find_uart_base();
-+ init_complete = 1;
-+ }
-+
-+ if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
-+ uart_w32(ch, UART_TX);
-+ while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
-+ ;
-+ } else {
-+ while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0)
-+ ;
-+ uart_w32(ch, UART_REG_TX);
-+ while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0)
-+ ;
-+ }
- }
diff --git a/target/linux/ramips/patches-3.18/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-3.18/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
deleted file mode 100644
index 6bf0401f06..0000000000
--- a/target/linux/ramips/patches-3.18/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
+++ /dev/null
@@ -1,99 +0,0 @@
-From f8da5caf65926d44581d4e7914b28ceab3d28a7c Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 14 Jul 2013 23:08:11 +0200
-Subject: [PATCH 17/57] MIPS: use set_mode() to enable/disable the cevt-r4k
- irq
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/kernel/cevt-r4k.c | 37 +++++++++++++++++++++++++++++++------
- 1 file changed, 31 insertions(+), 6 deletions(-)
-
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -29,12 +29,6 @@ static int mips_next_event(unsigned long
- return res;
- }
-
--void mips_set_clock_mode(enum clock_event_mode mode,
-- struct clock_event_device *evt)
--{
-- /* Nothing to do ... */
--}
--
- DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
- int cp0_timer_irq_installed;
-
-@@ -75,9 +69,38 @@ struct irqaction c0_compare_irqaction =
- .name = "timer",
- };
-
-+void mips_set_clock_mode(enum clock_event_mode mode,
-+ struct clock_event_device *evt)
-+{
-+#ifdef CONFIG_CEVT_SYSTICK_QUIRK
-+ switch (mode) {
-+ case CLOCK_EVT_MODE_ONESHOT:
-+ if (cp0_timer_irq_installed)
-+ break;
-+
-+ cp0_timer_irq_installed = 1;
-+
-+ setup_irq(evt->irq, &c0_compare_irqaction);
-+ break;
-+
-+ case CLOCK_EVT_MODE_SHUTDOWN:
-+ if (!cp0_timer_irq_installed)
-+ break;
-+
-+ cp0_timer_irq_installed = 0;
-+ remove_irq(evt->irq, &c0_compare_irqaction);
-+ break;
-+
-+ default:
-+ pr_err("Unhandeled mips clock_mode\n");
-+ break;
-+ }
-+#endif
-+}
-
- void mips_event_handler(struct clock_event_device *dev)
- {
-+
- }
-
- /*
-@@ -198,12 +221,14 @@ int r4k_clockevent_init(void)
-
- clockevents_register_device(cd);
-
-+#ifndef CONFIG_CEVT_SYSTICK_QUIRK
- if (cp0_timer_irq_installed)
- return 0;
-
- cp0_timer_irq_installed = 1;
-
- setup_irq(irq, &c0_compare_irqaction);
-+#endif
-
- return 0;
- }
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -1,11 +1,16 @@
- if RALINK
-
-+config CEVT_SYSTICK_QUIRK
-+ bool
-+ default n
-+
- config CLKEVT_RT3352
- bool
- depends on SOC_RT305X || SOC_MT7620
- default y
- select CLKSRC_OF
- select CLKSRC_MMIO
-+ select CEVT_SYSTICK_QUIRK
-
- config RALINK_ILL_ACC
- bool
diff --git a/target/linux/ramips/patches-3.18/0019-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch b/target/linux/ramips/patches-3.18/0019-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch
deleted file mode 100644
index eff7cda72f..0000000000
--- a/target/linux/ramips/patches-3.18/0019-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch
+++ /dev/null
@@ -1,300 +0,0 @@
-From 9de00286e20a5f5edc419698373010f1cb6ff0ce Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:25:02 +0100
-Subject: [PATCH 19/57] MIPS: ralink: add pseudo pwm led trigger based on
- timer0
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/timer.c | 213 ++++++++++++++++++++++++++++++++++++++++++----
- 1 file changed, 197 insertions(+), 16 deletions(-)
-
---- a/arch/mips/ralink/timer.c
-+++ b/arch/mips/ralink/timer.c
-@@ -12,6 +12,8 @@
- #include <linux/timer.h>
- #include <linux/of_gpio.h>
- #include <linux/clk.h>
-+#include <linux/leds.h>
-+#include <linux/slab.h>
-
- #include <asm/mach-ralink/ralink_regs.h>
-
-@@ -23,16 +25,34 @@
-
- #define TMR0CTL_ENABLE BIT(7)
- #define TMR0CTL_MODE_PERIODIC BIT(4)
--#define TMR0CTL_PRESCALER 1
-+#define TMR0CTL_PRESCALER 2
- #define TMR0CTL_PRESCALE_VAL (0xf - TMR0CTL_PRESCALER)
- #define TMR0CTL_PRESCALE_DIV (65536 / BIT(TMR0CTL_PRESCALER))
-
-+struct rt_timer_gpio {
-+ struct list_head list;
-+ struct led_classdev *led;
-+};
-+
- struct rt_timer {
-- struct device *dev;
-- void __iomem *membase;
-- int irq;
-- unsigned long timer_freq;
-- unsigned long timer_div;
-+ struct device *dev;
-+ void __iomem *membase;
-+ int irq;
-+
-+ unsigned long timer_freq;
-+ unsigned long timer_div;
-+
-+ struct list_head gpios;
-+ struct led_trigger led_trigger;
-+ unsigned int duty_cycle;
-+ unsigned int duty;
-+
-+ unsigned int fade;
-+ unsigned int fade_min;
-+ unsigned int fade_max;
-+ unsigned int fade_speed;
-+ unsigned int fade_dir;
-+ unsigned int fade_count;
- };
-
- static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
-@@ -48,8 +68,37 @@ static inline u32 rt_timer_r32(struct rt
- static irqreturn_t rt_timer_irq(int irq, void *_rt)
- {
- struct rt_timer *rt = (struct rt_timer *) _rt;
-+ struct rt_timer_gpio *gpio;
-+ unsigned int val;
-
-- rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
-+ if (rt->fade && (rt->fade_count++ > rt->fade_speed)) {
-+ rt->fade_count = 0;
-+ if (rt->duty_cycle <= rt->fade_min)
-+ rt->fade_dir = 1;
-+ else if (rt->duty_cycle >= rt->fade_max)
-+ rt->fade_dir = 0;
-+
-+ if (rt->fade_dir)
-+ rt->duty_cycle += 1;
-+ else
-+ rt->duty_cycle -= 1;
-+
-+ }
-+
-+ val = rt->timer_freq / rt->timer_div;
-+ if (rt->duty)
-+ val *= rt->duty_cycle;
-+ else
-+ val *= (100 - rt->duty_cycle);
-+ val /= 100;
-+
-+ if (!list_empty(&rt->gpios))
-+ list_for_each_entry(gpio, &rt->gpios, list)
-+ led_set_brightness(gpio->led, !!rt->duty);
-+
-+ rt->duty = !rt->duty;
-+
-+ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, val + 1);
- rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT);
-
- return IRQ_HANDLED;
-@@ -58,8 +107,8 @@ static irqreturn_t rt_timer_irq(int irq,
-
- static int rt_timer_request(struct rt_timer *rt)
- {
-- int err = request_irq(rt->irq, rt_timer_irq, 0,
-- dev_name(rt->dev), rt);
-+ int err = devm_request_irq(rt->dev, rt->irq, rt_timer_irq,
-+ 0, dev_name(rt->dev), rt);
- if (err) {
- dev_err(rt->dev, "failed to request irq\n");
- } else {
-@@ -81,8 +130,6 @@ static int rt_timer_config(struct rt_tim
- else
- rt->timer_div = divisor;
-
-- rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div);
--
- return 0;
- }
-
-@@ -108,11 +155,128 @@ static void rt_timer_disable(struct rt_t
- rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
- }
-
-+static ssize_t led_fade_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
-+
-+ return sprintf(buf, "speed: %d, min: %d, max: %d\n", rt->fade_speed, rt->fade_min, rt->fade_max);
-+}
-+
-+static ssize_t led_fade_store(struct device *dev,
-+ struct device_attribute *attr, const char *buf, size_t size)
-+{
-+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
-+ unsigned int speed = 0, min = 0, max = 0;
-+ ssize_t ret = -EINVAL;
-+
-+ ret = sscanf(buf, "%u %u %u", &speed, &min, &max);
-+
-+ if (ret == 3) {
-+ rt->fade_speed = speed;
-+ rt->fade_min = min;
-+ rt->fade_max = max;
-+ rt->fade = 1;
-+ } else {
-+ rt->fade = 0;
-+ }
-+
-+ return size;
-+}
-+
-+static DEVICE_ATTR(fade, 0644, led_fade_show, led_fade_store);
-+
-+static ssize_t led_duty_cycle_show(struct device *dev,
-+ struct device_attribute *attr, char *buf)
-+{
-+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
-+
-+ return sprintf(buf, "%u\n", rt->duty_cycle);
-+}
-+
-+static ssize_t led_duty_cycle_store(struct device *dev,
-+ struct device_attribute *attr, const char *buf, size_t size)
-+{
-+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
-+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
-+ unsigned long state;
-+ ssize_t ret = -EINVAL;
-+
-+ ret = kstrtoul(buf, 10, &state);
-+ if (ret)
-+ return ret;
-+
-+ if (state <= 100)
-+ rt->duty_cycle = state;
-+ else
-+ rt->duty_cycle = 100;
-+
-+ rt->fade = 0;
-+
-+ return size;
-+}
-+
-+static DEVICE_ATTR(duty_cycle, 0644, led_duty_cycle_show, led_duty_cycle_store);
-+
-+static void rt_timer_trig_activate(struct led_classdev *led_cdev)
-+{
-+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
-+ struct rt_timer_gpio *gpio_data;
-+ int rc;
-+
-+ led_cdev->trigger_data = NULL;
-+ gpio_data = kzalloc(sizeof(*gpio_data), GFP_KERNEL);
-+ if (!gpio_data)
-+ return;
-+
-+ rc = device_create_file(led_cdev->dev, &dev_attr_duty_cycle);
-+ if (rc)
-+ goto err_gpio;
-+ rc = device_create_file(led_cdev->dev, &dev_attr_fade);
-+ if (rc)
-+ goto err_out_duty_cycle;
-+
-+ led_cdev->activated = true;
-+ led_cdev->trigger_data = gpio_data;
-+ gpio_data->led = led_cdev;
-+ list_add(&gpio_data->list, &rt->gpios);
-+ led_cdev->trigger_data = gpio_data;
-+ rt_timer_enable(rt);
-+ return;
-+
-+err_out_duty_cycle:
-+ device_remove_file(led_cdev->dev, &dev_attr_duty_cycle);
-+
-+err_gpio:
-+ kfree(gpio_data);
-+}
-+
-+static void rt_timer_trig_deactivate(struct led_classdev *led_cdev)
-+{
-+ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger);
-+ struct rt_timer_gpio *gpio_data = (struct rt_timer_gpio*) led_cdev->trigger_data;
-+
-+ if (led_cdev->activated) {
-+ device_remove_file(led_cdev->dev, &dev_attr_duty_cycle);
-+ device_remove_file(led_cdev->dev, &dev_attr_fade);
-+ led_cdev->activated = false;
-+ }
-+
-+ list_del(&gpio_data->list);
-+ rt_timer_disable(rt);
-+ led_set_brightness(led_cdev, LED_OFF);
-+}
-+
- static int rt_timer_probe(struct platform_device *pdev)
- {
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ const __be32 *divisor;
- struct rt_timer *rt;
- struct clk *clk;
-+ int ret;
-
- rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL);
- if (!rt) {
-@@ -140,12 +304,29 @@ static int rt_timer_probe(struct platfor
- if (!rt->timer_freq)
- return -EINVAL;
-
-+ rt->duty_cycle = 100;
- rt->dev = &pdev->dev;
- platform_set_drvdata(pdev, rt);
-
-- rt_timer_request(rt);
-- rt_timer_config(rt, 2);
-- rt_timer_enable(rt);
-+ ret = rt_timer_request(rt);
-+ if (ret)
-+ return ret;
-+
-+ divisor = of_get_property(pdev->dev.of_node, "ralink,divisor", NULL);
-+ if (divisor)
-+ rt_timer_config(rt, be32_to_cpu(*divisor));
-+ else
-+ rt_timer_config(rt, 200);
-+
-+ rt->led_trigger.name = "pwmtimer",
-+ rt->led_trigger.activate = rt_timer_trig_activate,
-+ rt->led_trigger.deactivate = rt_timer_trig_deactivate,
-+
-+ ret = led_trigger_register(&rt->led_trigger);
-+ if (ret)
-+ return ret;
-+
-+ INIT_LIST_HEAD(&rt->gpios);
-
- dev_info(&pdev->dev, "maximum frequency is %luHz\n", rt->timer_freq);
-
-@@ -156,6 +337,7 @@ static int rt_timer_remove(struct platfo
- {
- struct rt_timer *rt = platform_get_drvdata(pdev);
-
-+ led_trigger_unregister(&rt->led_trigger);
- rt_timer_disable(rt);
- rt_timer_free(rt);
-
-@@ -180,6 +362,6 @@ static struct platform_driver rt_timer_d
-
- module_platform_driver(rt_timer_driver);
-
--MODULE_DESCRIPTION("Ralink RT2880 timer");
-+MODULE_DESCRIPTION("Ralink RT2880 timer / pseudo pwm");
- MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
- MODULE_LICENSE("GPL");
diff --git a/target/linux/ramips/patches-3.18/0025-MIPS-ralink-allow-loading-irq-registers-from-the-dev.patch b/target/linux/ramips/patches-3.18/0025-MIPS-ralink-allow-loading-irq-registers-from-the-dev.patch
deleted file mode 100644
index f21ca3c7de..0000000000
--- a/target/linux/ramips/patches-3.18/0025-MIPS-ralink-allow-loading-irq-registers-from-the-dev.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From b1cc9a15f6ead8dbd849257e42d69a5799fb7597 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 6 Aug 2014 18:24:36 +0200
-Subject: [PATCH 25/57] MIPS: ralink: allow loading irq registers from the
- devicetree
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/ralink/irq.c | 33 +++++++++++++++++++++++----------
- 1 file changed, 23 insertions(+), 10 deletions(-)
-
---- a/arch/mips/ralink/irq.c
-+++ b/arch/mips/ralink/irq.c
-@@ -20,14 +20,6 @@
-
- #include "common.h"
-
--/* INTC register offsets */
--#define INTC_REG_STATUS0 0x00
--#define INTC_REG_STATUS1 0x04
--#define INTC_REG_TYPE 0x20
--#define INTC_REG_RAW_STATUS 0x30
--#define INTC_REG_ENABLE 0x34
--#define INTC_REG_DISABLE 0x38
--
- #define INTC_INT_GLOBAL BIT(31)
-
- #define RALINK_CPU_IRQ_INTC (MIPS_CPU_IRQ_BASE + 2)
-@@ -44,16 +36,34 @@
-
- #define RALINK_INTC_IRQ_PERFC (RALINK_INTC_IRQ_BASE + 9)
-
-+enum rt_intc_regs_enum {
-+ INTC_REG_STATUS0 = 0,
-+ INTC_REG_STATUS1,
-+ INTC_REG_TYPE,
-+ INTC_REG_RAW_STATUS,
-+ INTC_REG_ENABLE,
-+ INTC_REG_DISABLE,
-+};
-+
-+static u32 rt_intc_regs[] = {
-+ [INTC_REG_STATUS0] = 0x00,
-+ [INTC_REG_STATUS1] = 0x04,
-+ [INTC_REG_TYPE] = 0x20,
-+ [INTC_REG_RAW_STATUS] = 0x30,
-+ [INTC_REG_ENABLE] = 0x34,
-+ [INTC_REG_DISABLE] = 0x38,
-+};
-+
- static void __iomem *rt_intc_membase;
-
- static inline void rt_intc_w32(u32 val, unsigned reg)
- {
-- __raw_writel(val, rt_intc_membase + reg);
-+ __raw_writel(val, rt_intc_membase + rt_intc_regs[reg]);
- }
-
- static inline u32 rt_intc_r32(unsigned reg)
- {
-- return __raw_readl(rt_intc_membase + reg);
-+ return __raw_readl(rt_intc_membase + rt_intc_regs[reg]);
- }
-
- static void ralink_intc_irq_unmask(struct irq_data *d)
-@@ -134,6 +144,9 @@ static int __init intc_of_init(struct de
- struct irq_domain *domain;
- int irq;
-
-+ if (!of_property_read_u32_array(node, "ralink,intc-registers", rt_intc_regs, 6))
-+ pr_info("intc: using register map from devicetree\n");
-+
- irq = irq_of_parse_and_map(node, 0);
- if (!irq)
- panic("Failed to get INTC IRQ");
diff --git a/target/linux/ramips/patches-3.18/0026-MIPS-ralink-add-mt7628an-support.patch b/target/linux/ramips/patches-3.18/0026-MIPS-ralink-add-mt7628an-support.patch
deleted file mode 100644
index c5c5d1a446..0000000000
--- a/target/linux/ramips/patches-3.18/0026-MIPS-ralink-add-mt7628an-support.patch
+++ /dev/null
@@ -1,398 +0,0 @@
-From a375beba066516ecafddebc765454ac6ec599f3d Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Wed, 6 Aug 2014 18:26:08 +0200
-Subject: [PATCH 26/57] MIPS: ralink: add mt7628an support
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/include/asm/mach-ralink/mt7620.h | 11 ++
- arch/mips/ralink/Kconfig | 2 +-
- arch/mips/ralink/mt7620.c | 266 +++++++++++++++++++++++-----
- 3 files changed, 232 insertions(+), 47 deletions(-)
-
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -13,6 +13,13 @@
- #ifndef _MT7620_REGS_H_
- #define _MT7620_REGS_H_
-
-+enum mt762x_soc_type {
-+ MT762X_SOC_UNKNOWN = 0,
-+ MT762X_SOC_MT7620A,
-+ MT762X_SOC_MT7620N,
-+ MT762X_SOC_MT7628AN,
-+};
-+
- #define MT7620_SYSC_BASE 0x10000000
-
- #define SYSC_REG_CHIP_NAME0 0x00
-@@ -27,6 +34,7 @@
-
- #define MT7620_CHIP_NAME0 0x3637544d
- #define MT7620_CHIP_NAME1 0x20203032
-+#define MT7628_CHIP_NAME1 0x20203832
-
- #define SYSCFG0_XTAL_FREQ_SEL BIT(6)
-
-@@ -71,6 +79,9 @@
- #define SYSCFG0_DRAM_TYPE_DDR1 1
- #define SYSCFG0_DRAM_TYPE_DDR2 2
-
-+#define SYSCFG0_DRAM_TYPE_DDR2_MT7628 0
-+#define SYSCFG0_DRAM_TYPE_DDR1_MT7628 1
-+
- #define MT7620_DRAM_BASE 0x0
- #define MT7620_SDRAM_SIZE_MIN 2
- #define MT7620_SDRAM_SIZE_MAX 64
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -41,7 +41,7 @@ choice
- select HW_HAS_PCI
-
- config SOC_MT7620
-- bool "MT7620"
-+ bool "MT7620/8"
-
- config SOC_MT7621
- bool "MT7621"
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -42,6 +42,8 @@
- #define CLKCFG_FFRAC_MASK 0x001f
- #define CLKCFG_FFRAC_USB_VAL 0x0003
-
-+enum mt762x_soc_type mt762x_soc;
-+
- /* does the board have sdram or ddram */
- static int dram_type;
-
-@@ -159,6 +161,125 @@ struct ralink_pinmux rt_gpio_pinmux = {
- .uart_mask = MT7620_GPIO_MODE_UART0_MASK,
- };
-
-+static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
-+ FUNC("sdxc", 3, 19, 1),
-+ FUNC("utif", 2, 19, 1),
-+ FUNC("gpio", 1, 19, 1),
-+ FUNC("pwm", 0, 19, 1),
-+};
-+
-+static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
-+ FUNC("sdxc", 3, 18, 1),
-+ FUNC("utif", 2, 18, 1),
-+ FUNC("gpio", 1, 18, 1),
-+ FUNC("pwm", 0, 18, 1),
-+};
-+
-+static struct rt2880_pmx_func uart2_grp_mt7628[] = {
-+ FUNC("sdxc", 3, 20, 2),
-+ FUNC("pwm", 2, 20, 2),
-+ FUNC("gpio", 1, 20, 2),
-+ FUNC("uart2", 0, 20, 2),
-+};
-+
-+static struct rt2880_pmx_func uart1_grp_mt7628[] = {
-+ FUNC("sdxc", 3, 45, 2),
-+ FUNC("pwm", 2, 45, 2),
-+ FUNC("gpio", 1, 45, 2),
-+ FUNC("uart1", 0, 45, 2),
-+};
-+
-+static struct rt2880_pmx_func i2c_grp_mt7628[] = {
-+ FUNC("-", 3, 4, 2),
-+ FUNC("debug", 2, 4, 2),
-+ FUNC("gpio", 1, 4, 2),
-+ FUNC("i2c", 0, 4, 2),
-+};
-+
-+static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
-+static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
-+static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
-+static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };
-+
-+static struct rt2880_pmx_func sd_mode_grp_mt7628[] = {
-+ FUNC("jtag", 3, 22, 8),
-+ FUNC("utif", 2, 22, 8),
-+ FUNC("gpio", 1, 22, 8),
-+ FUNC("sdxc", 0, 22, 8),
-+};
-+
-+static struct rt2880_pmx_func uart0_grp_mt7628[] = {
-+ FUNC("-", 3, 12, 2),
-+ FUNC("-", 2, 12, 2),
-+ FUNC("gpio", 1, 12, 2),
-+ FUNC("uart0", 0, 12, 2),
-+};
-+
-+static struct rt2880_pmx_func i2s_grp_mt7628[] = {
-+ FUNC("antenna", 3, 0, 4),
-+ FUNC("pcm", 2, 0, 4),
-+ FUNC("gpio", 1, 0, 4),
-+ FUNC("i2s", 0, 0, 4),
-+};
-+
-+static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
-+ FUNC("-", 3, 6, 1),
-+ FUNC("refclk", 2, 6, 1),
-+ FUNC("gpio", 1, 6, 1),
-+ FUNC("spi", 0, 6, 1),
-+};
-+
-+static struct rt2880_pmx_func spis_grp_mt7628[] = {
-+ FUNC("pwm", 3, 14, 4),
-+ FUNC("util", 2, 14, 4),
-+ FUNC("gpio", 1, 14, 4),
-+ FUNC("spis", 0, 14, 4),
-+};
-+
-+static struct rt2880_pmx_func gpio_grp_mt7628[] = {
-+ FUNC("pcie", 3, 11, 1),
-+ FUNC("refclk", 2, 11, 1),
-+ FUNC("gpio", 1, 11, 1),
-+ FUNC("gpio", 0, 11, 1),
-+};
-+
-+#define MT7628_GPIO_MODE_MASK 0x3
-+
-+#define MT7628_GPIO_MODE_PWM1 30
-+#define MT7628_GPIO_MODE_PWM0 28
-+#define MT7628_GPIO_MODE_UART2 26
-+#define MT7628_GPIO_MODE_UART1 24
-+#define MT7628_GPIO_MODE_I2C 20
-+#define MT7628_GPIO_MODE_REFCLK 18
-+#define MT7628_GPIO_MODE_PERST 16
-+#define MT7628_GPIO_MODE_WDT 14
-+#define MT7628_GPIO_MODE_SPI 12
-+#define MT7628_GPIO_MODE_SDMODE 10
-+#define MT7628_GPIO_MODE_UART0 8
-+#define MT7628_GPIO_MODE_I2S 6
-+#define MT7628_GPIO_MODE_CS1 4
-+#define MT7628_GPIO_MODE_SPIS 2
-+#define MT7628_GPIO_MODE_GPIO 0
-+
-+static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
-+ GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM1),
-+ GRP_G("pmw0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM0),
-+ GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART2),
-+ GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART1),
-+ GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_I2C),
-+ GRP("refclk", refclk_grp_mt7628, 1, MT7628_GPIO_MODE_REFCLK),
-+ GRP("perst", perst_grp_mt7628, 1, MT7628_GPIO_MODE_PERST),
-+ GRP("wdt", wdt_grp_mt7628, 1, MT7628_GPIO_MODE_WDT),
-+ GRP("spi", spi_grp_mt7628, 1, MT7628_GPIO_MODE_SPI),
-+ GRP_G("sdmode", sd_mode_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_SDMODE),
-+ GRP_G("uart0", uart0_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART0),
-+ GRP_G("i2s", i2s_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_I2S),
-+ GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_CS1),
-+ GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_SPIS),
-+ GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_GPIO),
-+ { 0 }
-+};
-+
- static __init u32
- mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
- {
-@@ -309,29 +430,42 @@ void __init ralink_clk_init(void)
-
- xtal_rate = mt7620_get_xtal_rate();
-
-- cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
-- pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
--
-- cpu_rate = mt7620_get_cpu_rate(pll_rate);
-- dram_rate = mt7620_get_dram_rate(pll_rate);
-- sys_rate = mt7620_get_sys_rate(cpu_rate);
-- periph_rate = mt7620_get_periph_rate(xtal_rate);
--
- #define RFMT(label) label ":%lu.%03luMHz "
- #define RINT(x) ((x) / 1000000)
- #define RFRAC(x) (((x) / 1000) % 1000)
-
-- pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
-- RINT(xtal_rate), RFRAC(xtal_rate),
-- RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
-- RINT(pll_rate), RFRAC(pll_rate));
-+ if (mt762x_soc == MT762X_SOC_MT7628AN) {
-+ if (xtal_rate == MHZ(40))
-+ cpu_rate = MHZ(580);
-+ else
-+ cpu_rate = MHZ(575);
-+ dram_rate = sys_rate = cpu_rate / 3;
-+ periph_rate = MHZ(40);
-+
-+ ralink_clk_add("10000d00.uartlite", periph_rate);
-+ ralink_clk_add("10000e00.uartlite", periph_rate);
-+ } else {
-+ cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
-+ pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
-+
-+ cpu_rate = mt7620_get_cpu_rate(pll_rate);
-+ dram_rate = mt7620_get_dram_rate(pll_rate);
-+ sys_rate = mt7620_get_sys_rate(cpu_rate);
-+ periph_rate = mt7620_get_periph_rate(xtal_rate);
-+
-+ pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
-+ RINT(xtal_rate), RFRAC(xtal_rate),
-+ RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
-+ RINT(pll_rate), RFRAC(pll_rate));
-+
-+ ralink_clk_add("10000500.uart", periph_rate);
-+ }
-
- pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"),
- RINT(cpu_rate), RFRAC(cpu_rate),
- RINT(dram_rate), RFRAC(dram_rate),
- RINT(sys_rate), RFRAC(sys_rate),
- RINT(periph_rate), RFRAC(periph_rate));
--
- #undef RFRAC
- #undef RINT
- #undef RFMT
-@@ -339,12 +473,13 @@ void __init ralink_clk_init(void)
- ralink_clk_add("cpu", cpu_rate);
- ralink_clk_add("10000100.timer", periph_rate);
- ralink_clk_add("10000120.watchdog", periph_rate);
-- ralink_clk_add("10000500.uart", periph_rate);
- ralink_clk_add("10000b00.spi", sys_rate);
- ralink_clk_add("10000c00.uartlite", periph_rate);
-+ ralink_clk_add("10000d00.uart1", periph_rate);
-+ ralink_clk_add("10000e00.uart2", periph_rate);
- ralink_clk_add("10180000.wmac", xtal_rate);
-
-- if (IS_ENABLED(CONFIG_USB)) {
-+ if (IS_ENABLED(CONFIG_USB) && mt762x_soc != MT762X_SOC_MT7628AN) {
- /*
- * When the CPU goes into sleep mode, the BUS clock will be too low for
- * USB to function properly
-@@ -367,6 +502,52 @@ void __init ralink_of_remap(void)
- panic("Failed to remap core resources");
- }
-
-+static __init void
-+mt7620_dram_init(struct ralink_soc_info *soc_info)
-+{
-+ switch (dram_type) {
-+ case SYSCFG0_DRAM_TYPE_SDRAM:
-+ pr_info("Board has SDRAM\n");
-+ soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
-+ soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
-+ break;
-+
-+ case SYSCFG0_DRAM_TYPE_DDR1:
-+ pr_info("Board has DDR1\n");
-+ soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
-+ soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
-+ break;
-+
-+ case SYSCFG0_DRAM_TYPE_DDR2:
-+ pr_info("Board has DDR2\n");
-+ soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
-+ soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
-+ break;
-+ default:
-+ BUG();
-+ }
-+}
-+
-+static __init void
-+mt7628_dram_init(struct ralink_soc_info *soc_info)
-+{
-+ switch (dram_type) {
-+ case SYSCFG0_DRAM_TYPE_DDR1_MT7628:
-+ pr_info("Board has DDR1\n");
-+ soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
-+ soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
-+ break;
-+
-+ case SYSCFG0_DRAM_TYPE_DDR2_MT7628:
-+ pr_info("Board has DDR2\n");
-+ soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
-+ soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
-+ break;
-+ default:
-+ BUG();
-+ }
-+}
-+
- void prom_soc_init(struct ralink_soc_info *soc_info)
- {
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
-@@ -384,18 +565,25 @@ void prom_soc_init(struct ralink_soc_inf
- rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
- bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
-
-- if (n0 != MT7620_CHIP_NAME0 || n1 != MT7620_CHIP_NAME1)
-- panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
--
-- if (bga) {
-- name = "MT7620A";
-- soc_info->compatible = "ralink,mt7620a-soc";
-- } else {
-- name = "MT7620N";
-- soc_info->compatible = "ralink,mt7620n-soc";
-+ if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
-+ if (bga) {
-+ mt762x_soc = MT762X_SOC_MT7620A;
-+ name = "MT7620A";
-+ soc_info->compatible = "ralink,mt7620a-soc";
-+ } else {
-+ mt762x_soc = MT762X_SOC_MT7620N;
-+ name = "MT7620N";
-+ soc_info->compatible = "ralink,mt7620n-soc";
- #ifdef CONFIG_PCI
-- panic("mt7620n is only supported for non pci kernels");
-+ panic("mt7620n is only supported for non pci kernels");
- #endif
-+ }
-+ } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
-+ mt762x_soc = MT762X_SOC_MT7628AN;
-+ name = "MT7628AN";
-+ soc_info->compatible = "ralink,mt7628an-soc";
-+ } else {
-+ panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
- }
-
- snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
-@@ -407,28 +595,11 @@ void prom_soc_init(struct ralink_soc_inf
- cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
- dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
-
-- switch (dram_type) {
-- case SYSCFG0_DRAM_TYPE_SDRAM:
-- pr_info("Board has SDRAM\n");
-- soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
-- soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
-- break;
--
-- case SYSCFG0_DRAM_TYPE_DDR1:
-- pr_info("Board has DDR1\n");
-- soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
-- soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
-- break;
--
-- case SYSCFG0_DRAM_TYPE_DDR2:
-- pr_info("Board has DDR2\n");
-- soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
-- soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
-- break;
-- default:
-- BUG();
-- }
- soc_info->mem_base = MT7620_DRAM_BASE;
-+ if (mt762x_soc == MT762X_SOC_MT7628AN)
-+ mt7628_dram_init(soc_info);
-+ else
-+ mt7620_dram_init(soc_info);
-
- pmu0 = __raw_readl(sysc + PMU0_CFG);
- pmu1 = __raw_readl(sysc + PMU1_CFG);
-@@ -437,4 +608,9 @@ void prom_soc_init(struct ralink_soc_inf
- (pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
- pr_info("Digital PMU set to %s control\n",
- (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
-+
-+ if (mt762x_soc == MT762X_SOC_MT7628AN)
-+ rt2880_pinmux_data = mt7628an_pinmux_data;
-+ else
-+ rt2880_pinmux_data = mt7620a_pinmux_data;
- }
diff --git a/target/linux/ramips/patches-3.18/0027-serial-ralink-adds-mt7620-serial.patch b/target/linux/ramips/patches-3.18/0027-serial-ralink-adds-mt7620-serial.patch
deleted file mode 100644
index c7f59c1638..0000000000
--- a/target/linux/ramips/patches-3.18/0027-serial-ralink-adds-mt7620-serial.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 0b24e0e6bf2d9a1ca5f95446bc025dafc226998c Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Fri, 15 Mar 2013 18:16:01 +0100
-Subject: [PATCH 27/57] serial: ralink: adds mt7620 serial
-
-Add the config symbol for Mediatek7620 SoC to SERIAL_8250_RT288X
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/tty/serial/8250/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/tty/serial/8250/Kconfig
-+++ b/drivers/tty/serial/8250/Kconfig
-@@ -297,7 +297,7 @@ config SERIAL_8250_EM
-
- config SERIAL_8250_RT288X
- bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
-- depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
-+ depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620)
- help
- If you have a Ralink RT288x/RT305x SoC based board and want to use the
- serial port, say Y to this option. The driver can handle up to 2 serial
diff --git a/target/linux/ramips/patches-3.18/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch b/target/linux/ramips/patches-3.18/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch
deleted file mode 100644
index ab60f2d549..0000000000
--- a/target/linux/ramips/patches-3.18/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From b9ba09038dab4d824176ea2c2f2b73f49b567217 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 16 Mar 2014 04:52:01 +0000
-Subject: [PATCH 28/57] serial: ralink: the core has a size of 0x100 and not
- 0x1000
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/tty/serial/8250/8250_core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/tty/serial/8250/8250_core.c
-+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -2634,7 +2634,7 @@ serial8250_pm(struct uart_port *port, un
- static unsigned int serial8250_port_size(struct uart_8250_port *pt)
- {
- if (pt->port.iotype == UPIO_AU)
-- return 0x1000;
-+ return 0x100;
- if (is_omap1_8250(pt))
- return 0x16 << pt->port.regshift;
-
diff --git a/target/linux/ramips/patches-3.18/0029-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch b/target/linux/ramips/patches-3.18/0029-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch
deleted file mode 100644
index ef29697e20..0000000000
--- a/target/linux/ramips/patches-3.18/0029-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 49b47dfcef1353cd28eac8f64170e75d28ce4311 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 14 Jul 2013 23:18:57 +0200
-Subject: [PATCH 29/57] serial: of: allow au1x00 and rt288x to load from OF
-
-In order to make serial_8250 loadable via OF on Au1x00 and Ralink WiSoC we need
-to default the iotype to UPIO_AU.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/tty/serial/of_serial.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/tty/serial/of_serial.c
-+++ b/drivers/tty/serial/of_serial.c
-@@ -102,7 +102,10 @@ static int of_platform_serial_setup(stru
- port->fifosize = prop;
-
- port->irq = irq_of_parse_and_map(np, 0);
-- port->iotype = UPIO_MEM;
-+ if (of_device_is_compatible(np, "ralink,rt2880-uart"))
-+ port->iotype = UPIO_AU;
-+ else
-+ port->iotype = UPIO_MEM;
- if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
- switch (prop) {
- case 1:
diff --git a/target/linux/ramips/patches-3.18/0030-pinctrl-ralink-add-pinctrl-driver.patch b/target/linux/ramips/patches-3.18/0030-pinctrl-ralink-add-pinctrl-driver.patch
deleted file mode 100644
index 63e84019d9..0000000000
--- a/target/linux/ramips/patches-3.18/0030-pinctrl-ralink-add-pinctrl-driver.patch
+++ /dev/null
@@ -1,1404 +0,0 @@
-From 675c6ddd9432c39f508f9d6bdda17d9c675788cf Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:34:05 +0100
-Subject: [PATCH 30/57] pinctrl: ralink: add pinctrl driver
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/Kconfig | 2 +
- arch/mips/include/asm/mach-ralink/mt7620.h | 41 ++-
- arch/mips/include/asm/mach-ralink/pinmux.h | 53 ++++
- arch/mips/include/asm/mach-ralink/rt305x.h | 35 ++-
- arch/mips/include/asm/mach-ralink/rt3883.h | 16 +-
- arch/mips/ralink/common.h | 19 --
- arch/mips/ralink/mt7620.c | 159 +++-------
- arch/mips/ralink/rt288x.c | 62 ++--
- arch/mips/ralink/rt305x.c | 151 ++++-----
- arch/mips/ralink/rt3883.c | 173 +++--------
- drivers/pinctrl/Kconfig | 5 +
- drivers/pinctrl/Makefile | 1 +
- drivers/pinctrl/pinctrl-rt2880.c | 467 ++++++++++++++++++++++++++++
- 13 files changed, 764 insertions(+), 420 deletions(-)
- create mode 100644 arch/mips/include/asm/mach-ralink/pinmux.h
- create mode 100644 drivers/pinctrl/pinctrl-rt2880.c
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -453,6 +453,8 @@ config RALINK
- select CLKDEV_LOOKUP
- select ARCH_HAS_RESET_CONTROLLER
- select RESET_CONTROLLER
-+ select PINCTRL
-+ select PINCTRL_RT2880
-
- config SGI_IP22
- bool "SGI IP22 (Indy/Indigo2)"
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -90,7 +90,6 @@ enum mt762x_soc_type {
- #define MT7620_DDR2_SIZE_MIN 32
- #define MT7620_DDR2_SIZE_MAX 256
-
--#define MT7620_GPIO_MODE_I2C BIT(0)
- #define MT7620_GPIO_MODE_UART0_SHIFT 2
- #define MT7620_GPIO_MODE_UART0_MASK 0x7
- #define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT)
-@@ -102,16 +101,36 @@ enum mt762x_soc_type {
- #define MT7620_GPIO_MODE_GPIO_UARTF 0x5
- #define MT7620_GPIO_MODE_GPIO_I2S 0x6
- #define MT7620_GPIO_MODE_GPIO 0x7
--#define MT7620_GPIO_MODE_UART1 BIT(5)
--#define MT7620_GPIO_MODE_MDIO BIT(8)
--#define MT7620_GPIO_MODE_RGMII1 BIT(9)
--#define MT7620_GPIO_MODE_RGMII2 BIT(10)
--#define MT7620_GPIO_MODE_SPI BIT(11)
--#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12)
--#define MT7620_GPIO_MODE_WLED BIT(13)
--#define MT7620_GPIO_MODE_JTAG BIT(15)
--#define MT7620_GPIO_MODE_EPHY BIT(15)
--#define MT7620_GPIO_MODE_WDT BIT(22)
-+
-+#define MT7620_GPIO_MODE_NAND 0
-+#define MT7620_GPIO_MODE_SD 1
-+#define MT7620_GPIO_MODE_ND_SD_GPIO 2
-+#define MT7620_GPIO_MODE_ND_SD_MASK 0x3
-+#define MT7620_GPIO_MODE_ND_SD_SHIFT 18
-+
-+#define MT7620_GPIO_MODE_PCIE_RST 0
-+#define MT7620_GPIO_MODE_PCIE_REF 1
-+#define MT7620_GPIO_MODE_PCIE_GPIO 2
-+#define MT7620_GPIO_MODE_PCIE_MASK 0x3
-+#define MT7620_GPIO_MODE_PCIE_SHIFT 16
-+
-+#define MT7620_GPIO_MODE_WDT_RST 0
-+#define MT7620_GPIO_MODE_WDT_REF 1
-+#define MT7620_GPIO_MODE_WDT_GPIO 2
-+#define MT7620_GPIO_MODE_WDT_MASK 0x3
-+#define MT7620_GPIO_MODE_WDT_SHIFT 21
-+
-+#define MT7620_GPIO_MODE_I2C 0
-+#define MT7620_GPIO_MODE_UART1 5
-+#define MT7620_GPIO_MODE_MDIO 8
-+#define MT7620_GPIO_MODE_RGMII1 9
-+#define MT7620_GPIO_MODE_RGMII2 10
-+#define MT7620_GPIO_MODE_SPI 11
-+#define MT7620_GPIO_MODE_SPI_REF_CLK 12
-+#define MT7620_GPIO_MODE_WLED 13
-+#define MT7620_GPIO_MODE_JTAG 15
-+#define MT7620_GPIO_MODE_EPHY 15
-+#define MT7620_GPIO_MODE_PA 20
-
- static inline int mt7620_get_eco(void)
- {
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ralink/pinmux.h
-@@ -0,0 +1,53 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * publishhed by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#ifndef _RT288X_PINMUX_H__
-+#define _RT288X_PINMUX_H__
-+
-+#define FUNC(name, value, pin_first, pin_count) { name, value, pin_first, pin_count }
-+#define GRP(_name, _func, _mask, _shift) \
-+ { .name = _name, .mask = _mask, .shift = _shift, \
-+ .func = _func, .gpio = _mask, \
-+ .func_count = ARRAY_SIZE(_func) }
-+
-+#define GRP_G(_name, _func, _mask, _gpio, _shift) \
-+ { .name = _name, .mask = _mask, .shift = _shift, \
-+ .func = _func, .gpio = _gpio, \
-+ .func_count = ARRAY_SIZE(_func) }
-+
-+struct rt2880_pmx_group;
-+
-+struct rt2880_pmx_func {
-+ const char *name;
-+ const char value;
-+
-+ int pin_first;
-+ int pin_count;
-+ int *pins;
-+
-+ int *groups;
-+ int group_count;
-+
-+ int enabled;
-+};
-+
-+struct rt2880_pmx_group {
-+ const char *name;
-+ int enabled;
-+
-+ const u32 shift;
-+ const char mask;
-+ const char gpio;
-+
-+ struct rt2880_pmx_func *func;
-+ int func_count;
-+};
-+
-+extern struct rt2880_pmx_group *rt2880_pinmux_data;
-+
-+#endif
---- a/arch/mips/include/asm/mach-ralink/rt305x.h
-+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
-@@ -125,24 +125,29 @@ static inline int soc_is_rt5350(void)
- #define RT305X_GPIO_GE0_TXD0 40
- #define RT305X_GPIO_GE0_RXCLK 51
-
--#define RT305X_GPIO_MODE_I2C BIT(0)
--#define RT305X_GPIO_MODE_SPI BIT(1)
- #define RT305X_GPIO_MODE_UART0_SHIFT 2
- #define RT305X_GPIO_MODE_UART0_MASK 0x7
- #define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT)
--#define RT305X_GPIO_MODE_UARTF 0x0
--#define RT305X_GPIO_MODE_PCM_UARTF 0x1
--#define RT305X_GPIO_MODE_PCM_I2S 0x2
--#define RT305X_GPIO_MODE_I2S_UARTF 0x3
--#define RT305X_GPIO_MODE_PCM_GPIO 0x4
--#define RT305X_GPIO_MODE_GPIO_UARTF 0x5
--#define RT305X_GPIO_MODE_GPIO_I2S 0x6
--#define RT305X_GPIO_MODE_GPIO 0x7
--#define RT305X_GPIO_MODE_UART1 BIT(5)
--#define RT305X_GPIO_MODE_JTAG BIT(6)
--#define RT305X_GPIO_MODE_MDIO BIT(7)
--#define RT305X_GPIO_MODE_SDRAM BIT(8)
--#define RT305X_GPIO_MODE_RGMII BIT(9)
-+#define RT305X_GPIO_MODE_UARTF 0
-+#define RT305X_GPIO_MODE_PCM_UARTF 1
-+#define RT305X_GPIO_MODE_PCM_I2S 2
-+#define RT305X_GPIO_MODE_I2S_UARTF 3
-+#define RT305X_GPIO_MODE_PCM_GPIO 4
-+#define RT305X_GPIO_MODE_GPIO_UARTF 5
-+#define RT305X_GPIO_MODE_GPIO_I2S 6
-+#define RT305X_GPIO_MODE_GPIO 7
-+
-+#define RT305X_GPIO_MODE_I2C 0
-+#define RT305X_GPIO_MODE_SPI 1
-+#define RT305X_GPIO_MODE_UART1 5
-+#define RT305X_GPIO_MODE_JTAG 6
-+#define RT305X_GPIO_MODE_MDIO 7
-+#define RT305X_GPIO_MODE_SDRAM 8
-+#define RT305X_GPIO_MODE_RGMII 9
-+#define RT5350_GPIO_MODE_PHY_LED 14
-+#define RT5350_GPIO_MODE_SPI_CS1 21
-+#define RT3352_GPIO_MODE_LNA 18
-+#define RT3352_GPIO_MODE_PA 20
-
- #define RT3352_SYSC_REG_SYSCFG0 0x010
- #define RT3352_SYSC_REG_SYSCFG1 0x014
---- a/arch/mips/include/asm/mach-ralink/rt3883.h
-+++ b/arch/mips/include/asm/mach-ralink/rt3883.h
-@@ -112,8 +112,6 @@
- #define RT3883_CLKCFG1_PCI_CLK_EN BIT(19)
- #define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18)
-
--#define RT3883_GPIO_MODE_I2C BIT(0)
--#define RT3883_GPIO_MODE_SPI BIT(1)
- #define RT3883_GPIO_MODE_UART0_SHIFT 2
- #define RT3883_GPIO_MODE_UART0_MASK 0x7
- #define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT)
-@@ -125,11 +123,15 @@
- #define RT3883_GPIO_MODE_GPIO_UARTF 0x5
- #define RT3883_GPIO_MODE_GPIO_I2S 0x6
- #define RT3883_GPIO_MODE_GPIO 0x7
--#define RT3883_GPIO_MODE_UART1 BIT(5)
--#define RT3883_GPIO_MODE_JTAG BIT(6)
--#define RT3883_GPIO_MODE_MDIO BIT(7)
--#define RT3883_GPIO_MODE_GE1 BIT(9)
--#define RT3883_GPIO_MODE_GE2 BIT(10)
-+
-+#define RT3883_GPIO_MODE_I2C 0
-+#define RT3883_GPIO_MODE_SPI 1
-+#define RT3883_GPIO_MODE_UART1 5
-+#define RT3883_GPIO_MODE_JTAG 6
-+#define RT3883_GPIO_MODE_MDIO 7
-+#define RT3883_GPIO_MODE_GE1 9
-+#define RT3883_GPIO_MODE_GE2 10
-+
- #define RT3883_GPIO_MODE_PCI_SHIFT 11
- #define RT3883_GPIO_MODE_PCI_MASK 0x7
- #define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT)
---- a/arch/mips/ralink/common.h
-+++ b/arch/mips/ralink/common.h
-@@ -11,25 +11,6 @@
-
- #define RAMIPS_SYS_TYPE_LEN 32
-
--struct ralink_pinmux_grp {
-- const char *name;
-- u32 mask;
-- int gpio_first;
-- int gpio_last;
--};
--
--struct ralink_pinmux {
-- struct ralink_pinmux_grp *mode;
-- struct ralink_pinmux_grp *uart;
-- int uart_shift;
-- u32 uart_mask;
-- void (*wdt_reset)(void);
-- struct ralink_pinmux_grp *pci;
-- int pci_shift;
-- u32 pci_mask;
--};
--extern struct ralink_pinmux rt_gpio_pinmux;
--
- struct ralink_soc_info {
- unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
- unsigned char *compatible;
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -17,6 +17,7 @@
- #include <asm/mipsregs.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/mt7620.h>
-+#include <asm/mach-ralink/pinmux.h>
-
- #include "common.h"
-
-@@ -47,118 +48,58 @@ enum mt762x_soc_type mt762x_soc;
- /* does the board have sdram or ddram */
- static int dram_type;
-
--static struct ralink_pinmux_grp mode_mux[] = {
-- {
-- .name = "i2c",
-- .mask = MT7620_GPIO_MODE_I2C,
-- .gpio_first = 1,
-- .gpio_last = 2,
-- }, {
-- .name = "spi",
-- .mask = MT7620_GPIO_MODE_SPI,
-- .gpio_first = 3,
-- .gpio_last = 6,
-- }, {
-- .name = "uartlite",
-- .mask = MT7620_GPIO_MODE_UART1,
-- .gpio_first = 15,
-- .gpio_last = 16,
-- }, {
-- .name = "wdt",
-- .mask = MT7620_GPIO_MODE_WDT,
-- .gpio_first = 17,
-- .gpio_last = 17,
-- }, {
-- .name = "mdio",
-- .mask = MT7620_GPIO_MODE_MDIO,
-- .gpio_first = 22,
-- .gpio_last = 23,
-- }, {
-- .name = "rgmii1",
-- .mask = MT7620_GPIO_MODE_RGMII1,
-- .gpio_first = 24,
-- .gpio_last = 35,
-- }, {
-- .name = "spi refclk",
-- .mask = MT7620_GPIO_MODE_SPI_REF_CLK,
-- .gpio_first = 37,
-- .gpio_last = 39,
-- }, {
-- .name = "jtag",
-- .mask = MT7620_GPIO_MODE_JTAG,
-- .gpio_first = 40,
-- .gpio_last = 44,
-- }, {
-- /* shared lines with jtag */
-- .name = "ephy",
-- .mask = MT7620_GPIO_MODE_EPHY,
-- .gpio_first = 40,
-- .gpio_last = 44,
-- }, {
-- .name = "nand",
-- .mask = MT7620_GPIO_MODE_JTAG,
-- .gpio_first = 45,
-- .gpio_last = 59,
-- }, {
-- .name = "rgmii2",
-- .mask = MT7620_GPIO_MODE_RGMII2,
-- .gpio_first = 60,
-- .gpio_last = 71,
-- }, {
-- .name = "wled",
-- .mask = MT7620_GPIO_MODE_WLED,
-- .gpio_first = 72,
-- .gpio_last = 72,
-- }, {0}
-+static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) };
-+static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) };
-+static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) };
-+static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 22, 2) };
-+static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) };
-+static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) };
-+static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) };
-+static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) };
-+static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) };
-+static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) };
-+static struct rt2880_pmx_func uartf_grp[] = {
-+ FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8),
-+ FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8),
-+ FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8),
-+ FUNC("i2s uartf", MT7620_GPIO_MODE_I2S_UARTF, 7, 8),
-+ FUNC("pcm gpio", MT7620_GPIO_MODE_PCM_GPIO, 11, 4),
-+ FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4),
-+ FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4),
- };
--
--static struct ralink_pinmux_grp uart_mux[] = {
-- {
-- .name = "uartf",
-- .mask = MT7620_GPIO_MODE_UARTF,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "pcm uartf",
-- .mask = MT7620_GPIO_MODE_PCM_UARTF,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "pcm i2s",
-- .mask = MT7620_GPIO_MODE_PCM_I2S,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "i2s uartf",
-- .mask = MT7620_GPIO_MODE_I2S_UARTF,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "pcm gpio",
-- .mask = MT7620_GPIO_MODE_PCM_GPIO,
-- .gpio_first = 11,
-- .gpio_last = 14,
-- }, {
-- .name = "gpio uartf",
-- .mask = MT7620_GPIO_MODE_GPIO_UARTF,
-- .gpio_first = 7,
-- .gpio_last = 10,
-- }, {
-- .name = "gpio i2s",
-- .mask = MT7620_GPIO_MODE_GPIO_I2S,
-- .gpio_first = 7,
-- .gpio_last = 10,
-- }, {
-- .name = "gpio",
-- .mask = MT7620_GPIO_MODE_GPIO,
-- }, {0}
-+static struct rt2880_pmx_func wdt_grp[] = {
-+ FUNC("wdt rst", 0, 17, 1),
-+ FUNC("wdt refclk", 0, 17, 1),
-+ };
-+static struct rt2880_pmx_func pcie_rst_grp[] = {
-+ FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1),
-+ FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1)
-+};
-+static struct rt2880_pmx_func nd_sd_grp[] = {
-+ FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
-+ FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15)
- };
-
--struct ralink_pinmux rt_gpio_pinmux = {
-- .mode = mode_mux,
-- .uart = uart_mux,
-- .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
-- .uart_mask = MT7620_GPIO_MODE_UART0_MASK,
-+static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
-+ GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C),
-+ GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK,
-+ MT7620_GPIO_MODE_UART0_SHIFT),
-+ GRP("spi", spi_grp, 1, MT7620_GPIO_MODE_SPI),
-+ GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1),
-+ GRP_G("wdt", wdt_grp, MT7620_GPIO_MODE_WDT_MASK,
-+ MT7620_GPIO_MODE_WDT_GPIO, MT7620_GPIO_MODE_WDT_SHIFT),
-+ GRP("mdio", mdio_grp, 1, MT7620_GPIO_MODE_MDIO),
-+ GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1),
-+ GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK),
-+ GRP_G("pcie", pcie_rst_grp, MT7620_GPIO_MODE_PCIE_MASK,
-+ MT7620_GPIO_MODE_PCIE_GPIO, MT7620_GPIO_MODE_PCIE_SHIFT),
-+ GRP_G("nd_sd", nd_sd_grp, MT7620_GPIO_MODE_ND_SD_MASK,
-+ MT7620_GPIO_MODE_ND_SD_GPIO, MT7620_GPIO_MODE_ND_SD_SHIFT),
-+ GRP("rgmii2", rgmii2_grp, 1, MT7620_GPIO_MODE_RGMII2),
-+ GRP("wled", wled_grp, 1, MT7620_GPIO_MODE_WLED),
-+ GRP("ephy", ephy_grp, 1, MT7620_GPIO_MODE_EPHY),
-+ GRP("pa", pa_grp, 1, MT7620_GPIO_MODE_PA),
-+ { 0 }
- };
-
- static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
---- a/arch/mips/ralink/rt288x.c
-+++ b/arch/mips/ralink/rt288x.c
-@@ -17,46 +17,27 @@
- #include <asm/mipsregs.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/rt288x.h>
-+#include <asm/mach-ralink/pinmux.h>
-
- #include "common.h"
-
--static struct ralink_pinmux_grp mode_mux[] = {
-- {
-- .name = "i2c",
-- .mask = RT2880_GPIO_MODE_I2C,
-- .gpio_first = 1,
-- .gpio_last = 2,
-- }, {
-- .name = "spi",
-- .mask = RT2880_GPIO_MODE_SPI,
-- .gpio_first = 3,
-- .gpio_last = 6,
-- }, {
-- .name = "uartlite",
-- .mask = RT2880_GPIO_MODE_UART0,
-- .gpio_first = 7,
-- .gpio_last = 14,
-- }, {
-- .name = "jtag",
-- .mask = RT2880_GPIO_MODE_JTAG,
-- .gpio_first = 17,
-- .gpio_last = 21,
-- }, {
-- .name = "mdio",
-- .mask = RT2880_GPIO_MODE_MDIO,
-- .gpio_first = 22,
-- .gpio_last = 23,
-- }, {
-- .name = "sdram",
-- .mask = RT2880_GPIO_MODE_SDRAM,
-- .gpio_first = 24,
-- .gpio_last = 39,
-- }, {
-- .name = "pci",
-- .mask = RT2880_GPIO_MODE_PCI,
-- .gpio_first = 40,
-- .gpio_last = 71,
-- }, {0}
-+static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-+static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-+static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) };
-+static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-+static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-+static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
-+static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) };
-+
-+static struct rt2880_pmx_group rt2880_pinmux_data_act[] = {
-+ GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI),
-+ GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0),
-+ GRP("jtag", jtag_func, 1, RT2880_GPIO_MODE_JTAG),
-+ GRP("mdio", mdio_func, 1, RT2880_GPIO_MODE_MDIO),
-+ GRP("sdram", sdram_func, 1, RT2880_GPIO_MODE_SDRAM),
-+ GRP("pci", pci_func, 1, RT2880_GPIO_MODE_PCI),
-+ { 0 }
- };
-
- static void rt288x_wdt_reset(void)
-@@ -69,11 +50,6 @@ static void rt288x_wdt_reset(void)
- rt_sysc_w32(t, SYSC_REG_CLKCFG);
- }
-
--struct ralink_pinmux rt_gpio_pinmux = {
-- .mode = mode_mux,
-- .wdt_reset = rt288x_wdt_reset,
--};
--
- void __init ralink_clk_init(void)
- {
- unsigned long cpu_rate, wmac_rate = 40000000;
-@@ -141,4 +117,6 @@ void prom_soc_init(struct ralink_soc_inf
- soc_info->mem_base = RT2880_SDRAM_BASE;
- soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
- soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
-+
-+ rt2880_pinmux_data = rt2880_pinmux_data_act;
- }
---- a/arch/mips/ralink/rt305x.c
-+++ b/arch/mips/ralink/rt305x.c
-@@ -17,90 +17,76 @@
- #include <asm/mipsregs.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/rt305x.h>
-+#include <asm/mach-ralink/pinmux.h>
-
- #include "common.h"
-
- enum rt305x_soc_type rt305x_soc;
-
--static struct ralink_pinmux_grp mode_mux[] = {
-- {
-- .name = "i2c",
-- .mask = RT305X_GPIO_MODE_I2C,
-- .gpio_first = RT305X_GPIO_I2C_SD,
-- .gpio_last = RT305X_GPIO_I2C_SCLK,
-- }, {
-- .name = "spi",
-- .mask = RT305X_GPIO_MODE_SPI,
-- .gpio_first = RT305X_GPIO_SPI_EN,
-- .gpio_last = RT305X_GPIO_SPI_CLK,
-- }, {
-- .name = "uartlite",
-- .mask = RT305X_GPIO_MODE_UART1,
-- .gpio_first = RT305X_GPIO_UART1_TXD,
-- .gpio_last = RT305X_GPIO_UART1_RXD,
-- }, {
-- .name = "jtag",
-- .mask = RT305X_GPIO_MODE_JTAG,
-- .gpio_first = RT305X_GPIO_JTAG_TDO,
-- .gpio_last = RT305X_GPIO_JTAG_TDI,
-- }, {
-- .name = "mdio",
-- .mask = RT305X_GPIO_MODE_MDIO,
-- .gpio_first = RT305X_GPIO_MDIO_MDC,
-- .gpio_last = RT305X_GPIO_MDIO_MDIO,
-- }, {
-- .name = "sdram",
-- .mask = RT305X_GPIO_MODE_SDRAM,
-- .gpio_first = RT305X_GPIO_SDRAM_MD16,
-- .gpio_last = RT305X_GPIO_SDRAM_MD31,
-- }, {
-- .name = "rgmii",
-- .mask = RT305X_GPIO_MODE_RGMII,
-- .gpio_first = RT305X_GPIO_GE0_TXD0,
-- .gpio_last = RT305X_GPIO_GE0_RXCLK,
-- }, {0}
-+static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-+static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-+static struct rt2880_pmx_func uartf_func[] = {
-+ FUNC("uartf", RT305X_GPIO_MODE_UARTF, 7, 8),
-+ FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 8),
-+ FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 7, 8),
-+ FUNC("i2s uartf", RT305X_GPIO_MODE_I2S_UARTF, 7, 8),
-+ FUNC("pcm gpio", RT305X_GPIO_MODE_PCM_GPIO, 11, 4),
-+ FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 7, 4),
-+ FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 7, 4),
-+};
-+static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
-+static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-+static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-+static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) };
-+static struct rt2880_pmx_func rt5350_cs1_func[] = {
-+ FUNC("spi_cs1", 0, 27, 1),
-+ FUNC("wdg_cs1", 1, 27, 1),
-+};
-+static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) };
-+static struct rt2880_pmx_func rt3352_rgmii_func[] = { FUNC("rgmii", 0, 24, 12) };
-+static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) };
-+static struct rt2880_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) };
-+static struct rt2880_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) };
-+static struct rt2880_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) };
-+
-+static struct rt2880_pmx_group rt3050_pinmux_data[] = {
-+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
-+ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
-+ RT305X_GPIO_MODE_UART0_SHIFT),
-+ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
-+ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
-+ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
-+ GRP("rgmii", rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
-+ GRP("sdram", sdram_func, 1, RT305X_GPIO_MODE_SDRAM),
-+ { 0 }
-+};
-+
-+static struct rt2880_pmx_group rt3352_pinmux_data[] = {
-+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
-+ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
-+ RT305X_GPIO_MODE_UART0_SHIFT),
-+ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
-+ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
-+ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
-+ GRP("rgmii", rt3352_rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
-+ GRP("lna", rt3352_lna_func, 1, RT3352_GPIO_MODE_LNA),
-+ GRP("pa", rt3352_pa_func, 1, RT3352_GPIO_MODE_PA),
-+ GRP("led", rt3352_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
-+ { 0 }
- };
-
--static struct ralink_pinmux_grp uart_mux[] = {
-- {
-- .name = "uartf",
-- .mask = RT305X_GPIO_MODE_UARTF,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "pcm uartf",
-- .mask = RT305X_GPIO_MODE_PCM_UARTF,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "pcm i2s",
-- .mask = RT305X_GPIO_MODE_PCM_I2S,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "i2s uartf",
-- .mask = RT305X_GPIO_MODE_I2S_UARTF,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "pcm gpio",
-- .mask = RT305X_GPIO_MODE_PCM_GPIO,
-- .gpio_first = RT305X_GPIO_10,
-- .gpio_last = RT305X_GPIO_14,
-- }, {
-- .name = "gpio uartf",
-- .mask = RT305X_GPIO_MODE_GPIO_UARTF,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_10,
-- }, {
-- .name = "gpio i2s",
-- .mask = RT305X_GPIO_MODE_GPIO_I2S,
-- .gpio_first = RT305X_GPIO_7,
-- .gpio_last = RT305X_GPIO_10,
-- }, {
-- .name = "gpio",
-- .mask = RT305X_GPIO_MODE_GPIO,
-- }, {0}
-+static struct rt2880_pmx_group rt5350_pinmux_data[] = {
-+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
-+ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
-+ RT305X_GPIO_MODE_UART0_SHIFT),
-+ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
-+ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
-+ GRP("led", rt5350_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
-+ GRP("spi_cs1", rt5350_cs1_func, 2, RT5350_GPIO_MODE_SPI_CS1),
-+ { 0 }
- };
-
- static void rt305x_wdt_reset(void)
-@@ -114,14 +100,6 @@ static void rt305x_wdt_reset(void)
- rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG);
- }
-
--struct ralink_pinmux rt_gpio_pinmux = {
-- .mode = mode_mux,
-- .uart = uart_mux,
-- .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT,
-- .uart_mask = RT305X_GPIO_MODE_UART0_MASK,
-- .wdt_reset = rt305x_wdt_reset,
--};
--
- static unsigned long rt5350_get_mem_size(void)
- {
- void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
-@@ -290,11 +268,14 @@ void prom_soc_init(struct ralink_soc_inf
- soc_info->mem_base = RT305X_SDRAM_BASE;
- if (soc_is_rt5350()) {
- soc_info->mem_size = rt5350_get_mem_size();
-+ rt2880_pinmux_data = rt5350_pinmux_data;
- } else if (soc_is_rt305x() || soc_is_rt3350()) {
- soc_info->mem_size_min = RT305X_MEM_SIZE_MIN;
- soc_info->mem_size_max = RT305X_MEM_SIZE_MAX;
-+ rt2880_pinmux_data = rt3050_pinmux_data;
- } else if (soc_is_rt3352()) {
- soc_info->mem_size_min = RT3352_MEM_SIZE_MIN;
- soc_info->mem_size_max = RT3352_MEM_SIZE_MAX;
-+ rt2880_pinmux_data = rt3352_pinmux_data;
- }
- }
---- a/arch/mips/ralink/rt3883.c
-+++ b/arch/mips/ralink/rt3883.c
-@@ -17,132 +17,50 @@
- #include <asm/mipsregs.h>
- #include <asm/mach-ralink/ralink_regs.h>
- #include <asm/mach-ralink/rt3883.h>
-+#include <asm/mach-ralink/pinmux.h>
-
- #include "common.h"
-
--static struct ralink_pinmux_grp mode_mux[] = {
-- {
-- .name = "i2c",
-- .mask = RT3883_GPIO_MODE_I2C,
-- .gpio_first = RT3883_GPIO_I2C_SD,
-- .gpio_last = RT3883_GPIO_I2C_SCLK,
-- }, {
-- .name = "spi",
-- .mask = RT3883_GPIO_MODE_SPI,
-- .gpio_first = RT3883_GPIO_SPI_CS0,
-- .gpio_last = RT3883_GPIO_SPI_MISO,
-- }, {
-- .name = "uartlite",
-- .mask = RT3883_GPIO_MODE_UART1,
-- .gpio_first = RT3883_GPIO_UART1_TXD,
-- .gpio_last = RT3883_GPIO_UART1_RXD,
-- }, {
-- .name = "jtag",
-- .mask = RT3883_GPIO_MODE_JTAG,
-- .gpio_first = RT3883_GPIO_JTAG_TDO,
-- .gpio_last = RT3883_GPIO_JTAG_TCLK,
-- }, {
-- .name = "mdio",
-- .mask = RT3883_GPIO_MODE_MDIO,
-- .gpio_first = RT3883_GPIO_MDIO_MDC,
-- .gpio_last = RT3883_GPIO_MDIO_MDIO,
-- }, {
-- .name = "ge1",
-- .mask = RT3883_GPIO_MODE_GE1,
-- .gpio_first = RT3883_GPIO_GE1_TXD0,
-- .gpio_last = RT3883_GPIO_GE1_RXCLK,
-- }, {
-- .name = "ge2",
-- .mask = RT3883_GPIO_MODE_GE2,
-- .gpio_first = RT3883_GPIO_GE2_TXD0,
-- .gpio_last = RT3883_GPIO_GE2_RXCLK,
-- }, {
-- .name = "pci",
-- .mask = RT3883_GPIO_MODE_PCI,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "lna a",
-- .mask = RT3883_GPIO_MODE_LNA_A,
-- .gpio_first = RT3883_GPIO_LNA_PE_A0,
-- .gpio_last = RT3883_GPIO_LNA_PE_A2,
-- }, {
-- .name = "lna g",
-- .mask = RT3883_GPIO_MODE_LNA_G,
-- .gpio_first = RT3883_GPIO_LNA_PE_G0,
-- .gpio_last = RT3883_GPIO_LNA_PE_G2,
-- }, {0}
-+static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
-+static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
-+static struct rt2880_pmx_func uartf_func[] = {
-+ FUNC("uartf", RT3883_GPIO_MODE_UARTF, 7, 8),
-+ FUNC("pcm uartf", RT3883_GPIO_MODE_PCM_UARTF, 7, 8),
-+ FUNC("pcm i2s", RT3883_GPIO_MODE_PCM_I2S, 7, 8),
-+ FUNC("i2s uartf", RT3883_GPIO_MODE_I2S_UARTF, 7, 8),
-+ FUNC("pcm gpio", RT3883_GPIO_MODE_PCM_GPIO, 11, 4),
-+ FUNC("gpio uartf", RT3883_GPIO_MODE_GPIO_UARTF, 7, 4),
-+ FUNC("gpio i2s", RT3883_GPIO_MODE_GPIO_I2S, 7, 4),
- };
--
--static struct ralink_pinmux_grp uart_mux[] = {
-- {
-- .name = "uartf",
-- .mask = RT3883_GPIO_MODE_UARTF,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "pcm uartf",
-- .mask = RT3883_GPIO_MODE_PCM_UARTF,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "pcm i2s",
-- .mask = RT3883_GPIO_MODE_PCM_I2S,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "i2s uartf",
-- .mask = RT3883_GPIO_MODE_I2S_UARTF,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "pcm gpio",
-- .mask = RT3883_GPIO_MODE_PCM_GPIO,
-- .gpio_first = RT3883_GPIO_11,
-- .gpio_last = RT3883_GPIO_14,
-- }, {
-- .name = "gpio uartf",
-- .mask = RT3883_GPIO_MODE_GPIO_UARTF,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_10,
-- }, {
-- .name = "gpio i2s",
-- .mask = RT3883_GPIO_MODE_GPIO_I2S,
-- .gpio_first = RT3883_GPIO_7,
-- .gpio_last = RT3883_GPIO_10,
-- }, {
-- .name = "gpio",
-- .mask = RT3883_GPIO_MODE_GPIO,
-- }, {0}
-+static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) };
-+static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) };
-+static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) };
-+static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) };
-+static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna a", 0, 35, 3) };
-+static struct rt2880_pmx_func pci_func[] = {
-+ FUNC("pci-dev", 0, 40, 32),
-+ FUNC("pci-host2", 1, 40, 32),
-+ FUNC("pci-host1", 2, 40, 32),
-+ FUNC("pci-fnc", 3, 40, 32)
- };
-+static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 84, 12) };
-+static struct rt2880_pmx_func ge2_func[] = { FUNC("ge2", 0, 72, 12) };
-
--static struct ralink_pinmux_grp pci_mux[] = {
-- {
-- .name = "pci-dev",
-- .mask = 0,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "pci-host2",
-- .mask = 1,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "pci-host1",
-- .mask = 2,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "pci-fnc",
-- .mask = 3,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {
-- .name = "pci-gpio",
-- .mask = 7,
-- .gpio_first = RT3883_GPIO_PCI_AD0,
-- .gpio_last = RT3883_GPIO_PCI_AD31,
-- }, {0}
-+static struct rt2880_pmx_group rt3883_pinmux_data[] = {
-+ GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT3883_GPIO_MODE_SPI),
-+ GRP("uartf", uartf_func, RT3883_GPIO_MODE_UART0_MASK,
-+ RT3883_GPIO_MODE_UART0_SHIFT),
-+ GRP("uartlite", uartlite_func, 1, RT3883_GPIO_MODE_UART1),
-+ GRP("jtag", jtag_func, 1, RT3883_GPIO_MODE_JTAG),
-+ GRP("mdio", mdio_func, 1, RT3883_GPIO_MODE_MDIO),
-+ GRP("lna a", lna_a_func, 1, RT3883_GPIO_MODE_LNA_A),
-+ GRP("lna g", lna_g_func, 1, RT3883_GPIO_MODE_LNA_G),
-+ GRP("pci", pci_func, RT3883_GPIO_MODE_PCI_MASK,
-+ RT3883_GPIO_MODE_PCI_SHIFT),
-+ GRP("ge1", ge1_func, 1, RT3883_GPIO_MODE_GE1),
-+ GRP("ge2", ge2_func, 1, RT3883_GPIO_MODE_GE2),
-+ { 0 }
- };
-
- static void rt3883_wdt_reset(void)
-@@ -155,17 +73,6 @@ static void rt3883_wdt_reset(void)
- rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1);
- }
-
--struct ralink_pinmux rt_gpio_pinmux = {
-- .mode = mode_mux,
-- .uart = uart_mux,
-- .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT,
-- .uart_mask = RT3883_GPIO_MODE_UART0_MASK,
-- .wdt_reset = rt3883_wdt_reset,
-- .pci = pci_mux,
-- .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT,
-- .pci_mask = RT3883_GPIO_MODE_PCI_MASK,
--};
--
- void __init ralink_clk_init(void)
- {
- unsigned long cpu_rate, sys_rate;
-@@ -244,4 +151,6 @@ void prom_soc_init(struct ralink_soc_inf
- soc_info->mem_base = RT3883_SDRAM_BASE;
- soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
- soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
-+
-+ rt2880_pinmux_data = rt3883_pinmux_data;
- }
---- a/drivers/pinctrl/Kconfig
-+++ b/drivers/pinctrl/Kconfig
-@@ -103,6 +103,11 @@ config PINCTRL_LANTIQ
- select PINMUX
- select PINCONF
-
-+config PINCTRL_RT2880
-+ bool
-+ depends on RALINK
-+ select PINMUX
-+
- config PINCTRL_FALCON
- bool
- depends on SOC_FALCON
---- a/drivers/pinctrl/Makefile
-+++ b/drivers/pinctrl/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX) += pinctr
- obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o
- obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
- obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
-+obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
- obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
- obj-$(CONFIG_PINCTRL_SIRF) += sirf/
- obj-$(CONFIG_PINCTRL_TEGRA) += pinctrl-tegra.o
---- /dev/null
-+++ b/drivers/pinctrl/pinctrl-rt2880.c
-@@ -0,0 +1,474 @@
-+/*
-+ * linux/drivers/pinctrl/pinctrl-rt2880.c
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * publishhed by the Free Software Foundation.
-+ *
-+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/of.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/consumer.h>
-+#include <linux/pinctrl/machine.h>
-+
-+#include <asm/mach-ralink/ralink_regs.h>
-+#include <asm/mach-ralink/pinmux.h>
-+#include <asm/mach-ralink/mt7620.h>
-+
-+#include "core.h"
-+
-+#define SYSC_REG_GPIO_MODE 0x60
-+#define SYSC_REG_GPIO_MODE2 0x64
-+
-+struct rt2880_priv {
-+ struct device *dev;
-+
-+ struct pinctrl_pin_desc *pads;
-+ struct pinctrl_desc *desc;
-+
-+ struct rt2880_pmx_func **func;
-+ int func_count;
-+
-+ struct rt2880_pmx_group *groups;
-+ const char **group_names;
-+ int group_count;
-+
-+ uint8_t *gpio;
-+ int max_pins;
-+};
-+
-+struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
-+
-+static int rt2880_get_group_count(struct pinctrl_dev *pctrldev)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->group_count;
-+}
-+
-+static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev,
-+ unsigned group)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (group >= p->group_count)
-+ return NULL;
-+
-+ return p->group_names[group];
-+}
-+
-+static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
-+ unsigned group,
-+ const unsigned **pins,
-+ unsigned *num_pins)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (group >= p->group_count)
-+ return -EINVAL;
-+
-+ *pins = p->groups[group].func[0].pins;
-+ *num_pins = p->groups[group].func[0].pin_count;
-+
-+ return 0;
-+}
-+
-+static void rt2880_pinctrl_dt_free_map(struct pinctrl_dev *pctrldev,
-+ struct pinctrl_map *map, unsigned num_maps)
-+{
-+ int i;
-+
-+ for (i = 0; i < num_maps; i++)
-+ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN ||
-+ map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
-+ kfree(map[i].data.configs.configs);
-+ kfree(map);
-+}
-+
-+static void rt2880_pinctrl_pin_dbg_show(struct pinctrl_dev *pctrldev,
-+ struct seq_file *s,
-+ unsigned offset)
-+{
-+ seq_printf(s, "ralink pio");
-+}
-+
-+static void rt2880_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctrldev,
-+ struct device_node *np,
-+ struct pinctrl_map **map)
-+{
-+ const char *function;
-+ int func = of_property_read_string(np, "ralink,function", &function);
-+ int grps = of_property_count_strings(np, "ralink,group");
-+ int i;
-+
-+ if (func || !grps)
-+ return;
-+
-+ for (i = 0; i < grps; i++) {
-+ const char *group;
-+
-+ of_property_read_string_index(np, "ralink,group", i, &group);
-+
-+ (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
-+ (*map)->name = function;
-+ (*map)->data.mux.group = group;
-+ (*map)->data.mux.function = function;
-+ (*map)++;
-+ }
-+}
-+
-+static int rt2880_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrldev,
-+ struct device_node *np_config,
-+ struct pinctrl_map **map,
-+ unsigned *num_maps)
-+{
-+ int max_maps = 0;
-+ struct pinctrl_map *tmp;
-+ struct device_node *np;
-+
-+ for_each_child_of_node(np_config, np) {
-+ int ret = of_property_count_strings(np, "ralink,group");
-+
-+ if (ret >= 0)
-+ max_maps += ret;
-+ }
-+
-+ if (!max_maps)
-+ return max_maps;
-+
-+ *map = kzalloc(max_maps * sizeof(struct pinctrl_map), GFP_KERNEL);
-+ if (!*map)
-+ return -ENOMEM;
-+
-+ tmp = *map;
-+
-+ for_each_child_of_node(np_config, np)
-+ rt2880_pinctrl_dt_subnode_to_map(pctrldev, np, &tmp);
-+ *num_maps = max_maps;
-+
-+ return 0;
-+}
-+
-+static const struct pinctrl_ops rt2880_pctrl_ops = {
-+ .get_groups_count = rt2880_get_group_count,
-+ .get_group_name = rt2880_get_group_name,
-+ .get_group_pins = rt2880_get_group_pins,
-+ .pin_dbg_show = rt2880_pinctrl_pin_dbg_show,
-+ .dt_node_to_map = rt2880_pinctrl_dt_node_to_map,
-+ .dt_free_map = rt2880_pinctrl_dt_free_map,
-+};
-+
-+static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->func_count;
-+}
-+
-+static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev,
-+ unsigned func)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ return p->func[func]->name;
-+}
-+
-+static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
-+ unsigned func,
-+ const char * const **groups,
-+ unsigned * const num_groups)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (p->func[func]->group_count == 1)
-+ *groups = &p->group_names[p->func[func]->groups[0]];
-+ else
-+ *groups = p->group_names;
-+
-+ *num_groups = p->func[func]->group_count;
-+
-+ return 0;
-+}
-+
-+static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
-+ unsigned func,
-+ unsigned group)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+ u32 mode = 0;
-+ u32 reg = SYSC_REG_GPIO_MODE;
-+ int i;
-+ int shift;
-+
-+ /* dont allow double use */
-+ if (p->groups[group].enabled) {
-+ dev_err(p->dev, "%s is already enabled\n", p->groups[group].name);
-+ return -EBUSY;
-+ }
-+
-+ p->groups[group].enabled = 1;
-+ p->func[func]->enabled = 1;
-+
-+ shift = p->groups[group].shift;
-+ if (shift >= 32) {
-+ shift -= 32;
-+ reg = SYSC_REG_GPIO_MODE2;
-+ }
-+ mode = rt_sysc_r32(reg);
-+ mode &= ~(p->groups[group].mask << shift);
-+
-+ /* mark the pins as gpio */
-+ for (i = 0; i < p->groups[group].func[0].pin_count; i++)
-+ p->gpio[p->groups[group].func[0].pins[i]] = 1;
-+
-+ /* function 0 is gpio and needs special handling */
-+ if (func == 0) {
-+ mode |= p->groups[group].gpio << shift;
-+ } else {
-+ for (i = 0; i < p->func[func]->pin_count; i++)
-+ p->gpio[p->func[func]->pins[i]] = 0;
-+ mode |= p->func[func]->value << shift;
-+ }
-+ rt_sysc_w32(mode, reg);
-+
-+ return 0;
-+}
-+
-+static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
-+ struct pinctrl_gpio_range *range,
-+ unsigned pin)
-+{
-+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
-+
-+ if (!p->gpio[pin]) {
-+ dev_err(p->dev, "pin %d is not set to gpio mux\n", pin);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct pinmux_ops rt2880_pmx_group_ops = {
-+ .get_functions_count = rt2880_pmx_func_count,
-+ .get_function_name = rt2880_pmx_func_name,
-+ .get_function_groups = rt2880_pmx_group_get_groups,
-+ .set_mux = rt2880_pmx_group_enable,
-+ .gpio_request_enable = rt2880_pmx_group_gpio_request_enable,
-+};
-+
-+static struct pinctrl_desc rt2880_pctrl_desc = {
-+ .owner = THIS_MODULE,
-+ .name = "rt2880-pinmux",
-+ .pctlops = &rt2880_pctrl_ops,
-+ .pmxops = &rt2880_pmx_group_ops,
-+};
-+
-+static struct rt2880_pmx_func gpio_func = {
-+ .name = "gpio",
-+};
-+
-+static int rt2880_pinmux_index(struct rt2880_priv *p)
-+{
-+ struct rt2880_pmx_func **f;
-+ struct rt2880_pmx_group *mux = p->groups;
-+ int i, j, c = 0;
-+
-+ /* count the mux functions */
-+ while (mux->name) {
-+ p->group_count++;
-+ mux++;
-+ }
-+
-+ /* allocate the group names array needed by the gpio function */
-+ p->group_names = devm_kzalloc(p->dev, sizeof(char *) * p->group_count, GFP_KERNEL);
-+ if (!p->group_names)
-+ return -1;
-+
-+ for (i = 0; i < p->group_count; i++) {
-+ p->group_names[i] = p->groups[i].name;
-+ p->func_count += p->groups[i].func_count;
-+ }
-+
-+ /* we have a dummy function[0] for gpio */
-+ p->func_count++;
-+
-+ /* allocate our function and group mapping index buffers */
-+ f = p->func = devm_kzalloc(p->dev, sizeof(struct rt2880_pmx_func) * p->func_count, GFP_KERNEL);
-+ gpio_func.groups = devm_kzalloc(p->dev, sizeof(int) * p->group_count, GFP_KERNEL);
-+ if (!f || !gpio_func.groups)
-+ return -1;
-+
-+ /* add a backpointer to the function so it knows its group */
-+ gpio_func.group_count = p->group_count;
-+ for (i = 0; i < gpio_func.group_count; i++)
-+ gpio_func.groups[i] = i;
-+
-+ f[c] = &gpio_func;
-+ c++;
-+
-+ /* add remaining functions */
-+ for (i = 0; i < p->group_count; i++) {
-+ for (j = 0; j < p->groups[i].func_count; j++) {
-+ f[c] = &p->groups[i].func[j];
-+ f[c]->groups = devm_kzalloc(p->dev, sizeof(int), GFP_KERNEL);
-+ f[c]->groups[0] = i;
-+ f[c]->group_count = 1;
-+ c++;
-+ }
-+ }
-+ return 0;
-+}
-+
-+static int rt2880_pinmux_pins(struct rt2880_priv *p)
-+{
-+ int i, j;
-+
-+ /* loop over the functions and initialize the pins array. also work out the highest pin used */
-+ for (i = 0; i < p->func_count; i++) {
-+ int pin;
-+
-+ if (!p->func[i]->pin_count)
-+ continue;
-+
-+ p->func[i]->pins = devm_kzalloc(p->dev, sizeof(int) * p->func[i]->pin_count, GFP_KERNEL);
-+ for (j = 0; j < p->func[i]->pin_count; j++)
-+ p->func[i]->pins[j] = p->func[i]->pin_first + j;
-+
-+ pin = p->func[i]->pin_first + p->func[i]->pin_count;
-+ if (pin > p->max_pins)
-+ p->max_pins = pin;
-+ }
-+
-+ /* the buffer that tells us which pins are gpio */
-+ p->gpio = devm_kzalloc(p->dev,sizeof(uint8_t) * p->max_pins,
-+ GFP_KERNEL);
-+ /* the pads needed to tell pinctrl about our pins */
-+ p->pads = devm_kzalloc(p->dev,
-+ sizeof(struct pinctrl_pin_desc) * p->max_pins,
-+ GFP_KERNEL);
-+ if (!p->pads || !p->gpio ) {
-+ dev_err(p->dev, "Failed to allocate gpio data\n");
-+ return -ENOMEM;
-+ }
-+
-+ memset(p->gpio, 1, sizeof(uint8_t) * p->max_pins);
-+ for (i = 0; i < p->func_count; i++) {
-+ if (!p->func[i]->pin_count)
-+ continue;
-+
-+ for (j = 0; j < p->func[i]->pin_count; j++)
-+ p->gpio[p->func[i]->pins[j]] = 0;
-+ }
-+
-+ /* pin 0 is always a gpio */
-+ p->gpio[0] = 1;
-+
-+ /* set the pads */
-+ for (i = 0; i < p->max_pins; i++) {
-+ /* strlen("ioXY") + 1 = 5 */
-+ char *name = devm_kzalloc(p->dev, 5, GFP_KERNEL);
-+
-+ if (!name) {
-+ dev_err(p->dev, "Failed to allocate pad name\n");
-+ return -ENOMEM;
-+ }
-+ snprintf(name, 5, "io%d", i);
-+ p->pads[i].number = i;
-+ p->pads[i].name = name;
-+ }
-+ p->desc->pins = p->pads;
-+ p->desc->npins = p->max_pins;
-+
-+ return 0;
-+}
-+
-+static int rt2880_pinmux_probe(struct platform_device *pdev)
-+{
-+ struct rt2880_priv *p;
-+ struct pinctrl_dev *dev;
-+ struct device_node *np;
-+
-+ if (!rt2880_pinmux_data)
-+ return -ENOSYS;
-+
-+ /* setup the private data */
-+ p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL);
-+ if (!p)
-+ return -ENOMEM;
-+
-+ p->dev = &pdev->dev;
-+ p->desc = &rt2880_pctrl_desc;
-+ p->groups = rt2880_pinmux_data;
-+ platform_set_drvdata(pdev, p);
-+
-+ /* init the device */
-+ if (rt2880_pinmux_index(p)) {
-+ dev_err(&pdev->dev, "failed to load index\n");
-+ return -EINVAL;
-+ }
-+ if (rt2880_pinmux_pins(p)) {
-+ dev_err(&pdev->dev, "failed to load pins\n");
-+ return -EINVAL;
-+ }
-+ dev = pinctrl_register(p->desc, &pdev->dev, p);
-+ if (IS_ERR(dev))
-+ return PTR_ERR(dev);
-+
-+ /* finalize by adding gpio ranges for enables gpio controllers */
-+ for_each_compatible_node(np, NULL, "ralink,rt2880-gpio") {
-+ const __be32 *ngpio, *gpiobase;
-+ struct pinctrl_gpio_range *range;
-+ char *name;
-+
-+ if (!of_device_is_available(np))
-+ continue;
-+
-+ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
-+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
-+ if (!ngpio || !gpiobase) {
-+ dev_err(&pdev->dev, "failed to load chip info\n");
-+ return -EINVAL;
-+ }
-+
-+ range = devm_kzalloc(p->dev, sizeof(struct pinctrl_gpio_range) + 4, GFP_KERNEL);
-+ range->name = name = (char *) &range[1];
-+ sprintf(name, "pio");
-+ range->npins = __be32_to_cpu(*ngpio);
-+ range->base = __be32_to_cpu(*gpiobase);
-+ range->pin_base = range->base;
-+ pinctrl_add_gpio_range(dev, range);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id rt2880_pinmux_match[] = {
-+ { .compatible = "ralink,rt2880-pinmux" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt2880_pinmux_match);
-+
-+static struct platform_driver rt2880_pinmux_driver = {
-+ .probe = rt2880_pinmux_probe,
-+ .driver = {
-+ .name = "rt2880-pinmux",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rt2880_pinmux_match,
-+ },
-+};
-+
-+int __init rt2880_pinmux_init(void)
-+{
-+ return platform_driver_register(&rt2880_pinmux_driver);
-+}
-+
-+core_initcall_sync(rt2880_pinmux_init);
diff --git a/target/linux/ramips/patches-3.18/0031-PCI-MIPS-adds-rt2880-pci-support.patch b/target/linux/ramips/patches-3.18/0031-PCI-MIPS-adds-rt2880-pci-support.patch
deleted file mode 100644
index 193f1c28b4..0000000000
--- a/target/linux/ramips/patches-3.18/0031-PCI-MIPS-adds-rt2880-pci-support.patch
+++ /dev/null
@@ -1,319 +0,0 @@
-From 5b0bcc314005dd14eeae190948165a81eef7da1f Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:36:02 +0100
-Subject: [PATCH 31/57] PCI: MIPS: adds rt2880 pci support
-
-Add support for the pci found on the rt2880 SoC.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- arch/mips/pci/Makefile | 1 +
- arch/mips/pci/pci-rt2880.c | 281 ++++++++++++++++++++++++++++++++++++++++++++
- arch/mips/ralink/Kconfig | 1 +
- 3 files changed, 283 insertions(+)
- create mode 100644 arch/mips/pci/pci-rt2880.c
-
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops
- obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
- obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
- obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
-+obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
- obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
- obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
- obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
---- /dev/null
-+++ b/arch/mips/pci/pci-rt2880.c
-@@ -0,0 +1,281 @@
-+/*
-+ * Ralink RT288x SoC PCI register definitions
-+ *
-+ * Copyright (C) 2009 John Crispin <blogic@openwrt.org>
-+ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Parts of this file are based on Ralink's 2.6.21 BSP
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/pci.h>
-+#include <linux/io.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-+
-+#include <asm/mach-ralink/rt288x.h>
-+
-+#define RT2880_PCI_BASE 0x00440000
-+#define RT288X_CPU_IRQ_PCI 4
-+
-+#define RT2880_PCI_MEM_BASE 0x20000000
-+#define RT2880_PCI_MEM_SIZE 0x10000000
-+#define RT2880_PCI_IO_BASE 0x00460000
-+#define RT2880_PCI_IO_SIZE 0x00010000
-+
-+#define RT2880_PCI_REG_PCICFG_ADDR 0x00
-+#define RT2880_PCI_REG_PCIMSK_ADDR 0x0c
-+#define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10
-+#define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18
-+#define RT2880_PCI_REG_CONFIG_ADDR 0x20
-+#define RT2880_PCI_REG_CONFIG_DATA 0x24
-+#define RT2880_PCI_REG_MEMBASE 0x28
-+#define RT2880_PCI_REG_IOBASE 0x2c
-+#define RT2880_PCI_REG_ID 0x30
-+#define RT2880_PCI_REG_CLASS 0x34
-+#define RT2880_PCI_REG_SUBID 0x38
-+#define RT2880_PCI_REG_ARBCTL 0x80
-+
-+static void __iomem *rt2880_pci_base;
-+static DEFINE_SPINLOCK(rt2880_pci_lock);
-+
-+static u32 rt2880_pci_reg_read(u32 reg)
-+{
-+ return readl(rt2880_pci_base + reg);
-+}
-+
-+static void rt2880_pci_reg_write(u32 val, u32 reg)
-+{
-+ writel(val, rt2880_pci_base + reg);
-+}
-+
-+static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
-+ unsigned int func, unsigned int where)
-+{
-+ return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
-+ 0x80000000);
-+}
-+
-+static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 *val)
-+{
-+ unsigned long flags;
-+ u32 address;
-+ u32 data;
-+
-+ address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
-+ PCI_FUNC(devfn), where);
-+
-+ spin_lock_irqsave(&rt2880_pci_lock, flags);
-+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
-+ data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
-+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
-+
-+ switch (size) {
-+ case 1:
-+ *val = (data >> ((where & 3) << 3)) & 0xff;
-+ break;
-+ case 2:
-+ *val = (data >> ((where & 3) << 3)) & 0xffff;
-+ break;
-+ case 4:
-+ *val = data;
-+ break;
-+ }
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 val)
-+{
-+ unsigned long flags;
-+ u32 address;
-+ u32 data;
-+
-+ address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
-+ PCI_FUNC(devfn), where);
-+
-+ spin_lock_irqsave(&rt2880_pci_lock, flags);
-+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
-+ data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
-+
-+ switch (size) {
-+ case 1:
-+ data = (data & ~(0xff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 2:
-+ data = (data & ~(0xffff << ((where & 3) << 3))) |
-+ (val << ((where & 3) << 3));
-+ break;
-+ case 4:
-+ data = val;
-+ break;
-+ }
-+
-+ rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA);
-+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+static struct pci_ops rt2880_pci_ops = {
-+ .read = rt2880_pci_config_read,
-+ .write = rt2880_pci_config_write,
-+};
-+
-+static struct resource rt2880_pci_mem_resource = {
-+ .name = "PCI MEM space",
-+ .start = RT2880_PCI_MEM_BASE,
-+ .end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource rt2880_pci_io_resource = {
-+ .name = "PCI IO space",
-+ .start = RT2880_PCI_IO_BASE,
-+ .end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1,
-+ .flags = IORESOURCE_IO,
-+};
-+
-+static struct pci_controller rt2880_pci_controller = {
-+ .pci_ops = &rt2880_pci_ops,
-+ .mem_resource = &rt2880_pci_mem_resource,
-+ .io_resource = &rt2880_pci_io_resource,
-+};
-+
-+static inline u32 rt2880_pci_read_u32(unsigned long reg)
-+{
-+ unsigned long flags;
-+ u32 address;
-+ u32 ret;
-+
-+ address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
-+
-+ spin_lock_irqsave(&rt2880_pci_lock, flags);
-+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
-+ ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
-+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
-+
-+ return ret;
-+}
-+
-+static inline void rt2880_pci_write_u32(unsigned long reg, u32 val)
-+{
-+ unsigned long flags;
-+ u32 address;
-+
-+ address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
-+
-+ spin_lock_irqsave(&rt2880_pci_lock, flags);
-+ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
-+ rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA);
-+ spin_unlock_irqrestore(&rt2880_pci_lock, flags);
-+}
-+
-+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ u16 cmd;
-+ int irq = -1;
-+
-+ if (dev->bus->number != 0)
-+ return irq;
-+
-+ switch (PCI_SLOT(dev->devfn)) {
-+ case 0x00:
-+ rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
-+ (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
-+ break;
-+ case 0x11:
-+ irq = RT288X_CPU_IRQ_PCI;
-+ break;
-+ default:
-+ printk("%s:%s[%d] trying to alloc unknown pci irq\n",
-+ __FILE__, __func__, __LINE__);
-+ BUG();
-+ break;
-+ }
-+
-+ pci_write_config_byte((struct pci_dev*)dev, PCI_CACHE_LINE_SIZE, 0x14);
-+ pci_write_config_byte((struct pci_dev*)dev, PCI_LATENCY_TIMER, 0xFF);
-+ pci_read_config_word((struct pci_dev*)dev, PCI_COMMAND, &cmd);
-+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
-+ PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK |
-+ PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY;
-+ pci_write_config_word((struct pci_dev*)dev, PCI_COMMAND, cmd);
-+ pci_write_config_byte((struct pci_dev*)dev, PCI_INTERRUPT_LINE,
-+ dev->irq);
-+ return irq;
-+}
-+
-+static int rt288x_pci_probe(struct platform_device *pdev)
-+{
-+ void __iomem *io_map_base;
-+ int i;
-+
-+ rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE);
-+
-+ io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE);
-+ rt2880_pci_controller.io_map_base = (unsigned long) io_map_base;
-+ set_io_port_base((unsigned long) io_map_base);
-+
-+ ioport_resource.start = RT2880_PCI_IO_BASE;
-+ ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
-+
-+ rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
-+ for(i = 0; i < 0xfffff; i++) {}
-+
-+ rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
-+ rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
-+ rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE);
-+ rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE);
-+ rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR);
-+ rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID);
-+ rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS);
-+ rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID);
-+ rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR);
-+
-+ rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
-+ (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
-+
-+ register_pci_controller(&rt2880_pci_controller);
-+ return 0;
-+}
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ return 0;
-+}
-+
-+static const struct of_device_id rt288x_pci_match[] = {
-+ { .compatible = "ralink,rt288x-pci" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, rt288x_pci_match);
-+
-+static struct platform_driver rt288x_pci_driver = {
-+ .probe = rt288x_pci_probe,
-+ .driver = {
-+ .name = "rt288x-pci",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rt288x_pci_match,
-+ },
-+};
-+
-+int __init pcibios_init(void)
-+{
-+ int ret = platform_driver_register(&rt288x_pci_driver);
-+ if (ret)
-+ pr_info("rt288x-pci: Error registering platform driver!");
-+ return ret;
-+}
-+
-+arch_initcall(pcibios_init);
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -31,6 +31,7 @@ choice
- config SOC_RT288X
- bool "RT288x"
- select MIPS_L1_CACHE_SHIFT_4
-+ select HW_HAS_PCI
-
- config SOC_RT305X
- bool "RT305x"
diff --git a/target/linux/ramips/patches-3.18/0038-USB-add-OHCI-EHCI-OF-binding.patch b/target/linux/ramips/patches-3.18/0038-USB-add-OHCI-EHCI-OF-binding.patch
deleted file mode 100644
index a5fb5aba44..0000000000
--- a/target/linux/ramips/patches-3.18/0038-USB-add-OHCI-EHCI-OF-binding.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From ffb27de4760595c356ef619c97f25722c8db28e7 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 09:49:07 +0100
-Subject: [PATCH 38/57] USB: add OHCI/EHCI OF binding
-
-based on f3bc64d6d1f21c1b92d75f233a37b75d77af6963
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/usb/Makefile | 3 ++-
- drivers/usb/host/ehci-platform.c | 21 +++++++++++++++++----
- drivers/usb/host/ohci-platform.c | 37 +++++++++++++++++++++++++++++++------
- 3 files changed, 50 insertions(+), 11 deletions(-)
-
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -359,6 +359,7 @@ static int ehci_platform_resume(struct d
- static const struct of_device_id vt8500_ehci_ids[] = {
- { .compatible = "via,vt8500-ehci", },
- { .compatible = "wm,prizm-ehci", },
-+ { .compatible = "ralink,rt3xxx-ehci", },
- { .compatible = "generic-ehci", },
- {}
- };
---- a/drivers/usb/host/ohci-platform.c
-+++ b/drivers/usb/host/ohci-platform.c
-@@ -342,6 +342,7 @@ static int ohci_platform_resume(struct d
- #endif /* CONFIG_PM */
-
- static const struct of_device_id ohci_platform_ids[] = {
-+ { .compatible = "ralink,rt3xxx-ohci", },
- { .compatible = "generic-ohci", },
- { }
- };
diff --git a/target/linux/ramips/patches-3.18/0044-mtd-add-chunked-read-io-to-m25p80.patch b/target/linux/ramips/patches-3.18/0044-mtd-add-chunked-read-io-to-m25p80.patch
deleted file mode 100644
index 2e81e456d3..0000000000
--- a/target/linux/ramips/patches-3.18/0044-mtd-add-chunked-read-io-to-m25p80.patch
+++ /dev/null
@@ -1,154 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -19,6 +19,7 @@
- #include <linux/errno.h>
- #include <linux/module.h>
- #include <linux/device.h>
-+#include <linux/of.h>
-
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-@@ -32,6 +33,7 @@ struct m25p {
- struct spi_device *spi;
- struct spi_nor spi_nor;
- struct mtd_info mtd;
-+ u16 chunk_size;
- u8 command[MAX_CMD_SIZE];
- };
-
-@@ -117,25 +119,14 @@ static inline unsigned int m25p80_rx_nbi
- }
- }
-
--/*
-- * Read an address range from the nor chip. The address range
-- * may be any size provided it is within the physical boundaries.
-- */
--static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
-- size_t *retlen, u_char *buf)
-+static int __m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
-+ size_t *retlen, u_char *buf)
- {
- struct m25p *flash = nor->priv;
- struct spi_device *spi = flash->spi;
- struct spi_transfer t[2];
- struct spi_message m;
- int dummy = nor->read_dummy;
-- int ret;
--
-- /* Wait till previous write/erase is done. */
-- ret = nor->wait_till_ready(nor);
-- if (ret)
-- return ret;
--
- spi_message_init(&m);
- memset(t, 0, (sizeof t));
-
-@@ -156,6 +147,84 @@ static int m25p80_read(struct spi_nor *n
- *retlen = m.actual_length - m25p_cmdsz(nor) - dummy;
- return 0;
- }
-+/*
-+ * Read an address range from the nor chip. The address range
-+ * may be any size provided it is within the physical boundaries.
-+ */
-+static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
-+ size_t *retlen, u_char *buf)
-+{
-+ int ret;
-+
-+ /* Wait till previous write/erase is done. */
-+ ret = nor->wait_till_ready(nor);
-+ if (ret)
-+ return ret;
-+
-+ return __m25p80_read(nor, from, len, retlen, buf);
-+}
-+
-+
-+static void m25p80_chunked_write(struct spi_nor *nor, loff_t _from, size_t _len,
-+ size_t *_retlen, const u_char *_buf)
-+{
-+ struct m25p *flash = nor->priv;
-+ int chunk_size;
-+ int retlen = 0;
-+
-+ chunk_size = flash->chunk_size;
-+ if (!chunk_size)
-+ chunk_size = _len;
-+
-+ if (nor->addr_width > 3)
-+ chunk_size -= nor->addr_width - 3;
-+
-+ while (retlen < _len) {
-+ size_t len = min_t(int, chunk_size, _len - retlen);
-+ const u_char *buf = _buf + retlen;
-+ loff_t from = _from + retlen;
-+
-+ nor->wait_till_ready(nor);
-+ nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0, 0);
-+
-+ m25p80_write(nor, from, len, &retlen, buf);
-+ }
-+ *_retlen += retlen;
-+}
-+
-+static int m25p80_chunked_read(struct spi_nor *nor, loff_t _from, size_t _len,
-+ size_t *_retlen, u_char *_buf)
-+{
-+ struct m25p *flash = nor->priv;
-+ int chunk_size;
-+ int ret;
-+
-+ /* Wait till previous write/erase is done. */
-+ ret = nor->wait_till_ready(nor);
-+ if (ret)
-+ return ret;
-+
-+ chunk_size = flash->chunk_size;
-+ if (!chunk_size)
-+ chunk_size = _len;
-+
-+ *_retlen = 0;
-+
-+ while (*_retlen < _len) {
-+ size_t len = min_t(int, chunk_size, _len - *_retlen);
-+ u_char *buf = _buf + *_retlen;
-+ loff_t from = _from + *_retlen;
-+ int retlen = 0;
-+ int ret = __m25p80_read(nor, from, len, &retlen, buf);
-+
-+ if (ret)
-+ return ret;
-+
-+ *_retlen += retlen;
-+ }
-+
-+ return 0;
-+}
-
- static int m25p80_erase(struct spi_nor *nor, loff_t offset)
- {
-@@ -197,6 +266,7 @@ static int m25p_probe(struct spi_device
- struct spi_nor *nor;
- enum read_mode mode = SPI_NOR_NORMAL;
- char *flash_name = NULL;
-+ u32 val;
- int ret;
-
- data = dev_get_platdata(&spi->dev);
-@@ -244,6 +314,14 @@ static int m25p_probe(struct spi_device
- if (ret)
- return ret;
-
-+ if (spi->dev.of_node &&
-+ !of_property_read_u32(spi->dev.of_node, "m25p,chunked-io", &val)) {
-+ dev_warn(&spi->dev, "using chunked io\n");
-+ nor->read = m25p80_chunked_read;
-+ nor->write = m25p80_chunked_write;
-+ flash->chunk_size = val;
-+ }
-+
- ppdata.of_node = spi->dev.of_node;
-
- return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
diff --git a/target/linux/ramips/patches-3.18/0059-USB-fix-dwc2.patch b/target/linux/ramips/patches-3.18/0059-USB-fix-dwc2.patch
deleted file mode 100644
index 92e4dc00b1..0000000000
--- a/target/linux/ramips/patches-3.18/0059-USB-fix-dwc2.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/drivers/usb/dwc2/hcd.c
-+++ b/drivers/usb/dwc2/hcd.c
-@@ -47,6 +47,7 @@
- #include <linux/io.h>
- #include <linux/slab.h>
- #include <linux/usb.h>
-+#include <linux/reset.h>
-
- #include <linux/usb/hcd.h>
- #include <linux/usb/ch11.h>
-@@ -2780,6 +2781,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
-
- dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n");
-
-+ device_reset(hsotg->dev);
-+
- /* Detect config values from hardware */
- retval = dwc2_get_hwparams(hsotg);
-
diff --git a/target/linux/ramips/patches-3.18/0063-cevt-rt3352.patch b/target/linux/ramips/patches-3.18/0063-cevt-rt3352.patch
deleted file mode 100644
index 749701f2e5..0000000000
--- a/target/linux/ramips/patches-3.18/0063-cevt-rt3352.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/ralink/cevt-rt3352.c
-+++ b/arch/mips/ralink/cevt-rt3352.c
-@@ -54,7 +54,7 @@ static int systick_next_event(unsigned l
- sdev = container_of(evt, struct systick_device, dev);
- count = ioread32(sdev->membase + SYSTICK_COUNT);
- count = (count + delta) % SYSTICK_FREQ;
-- iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
-+ iowrite32(count, sdev->membase + SYSTICK_COMPARE);
-
- return 0;
- }
diff --git a/target/linux/ramips/patches-3.18/0064-MIPS-ralink-fix-clearing-the-illegal-access-interrup.patch b/target/linux/ramips/patches-3.18/0064-MIPS-ralink-fix-clearing-the-illegal-access-interrup.patch
deleted file mode 100644
index 8153272308..0000000000
--- a/target/linux/ramips/patches-3.18/0064-MIPS-ralink-fix-clearing-the-illegal-access-interrup.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From f5d9bea58b576b50cdc0d7a607646b0849ff79c4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 25 May 2015 16:51:34 +0200
-Subject: [PATCH] MIPS: ralink: fix clearing the illegal access interrupt
-
-Due to a typo the illegal access interrupt is never cleared in by
-the interupt handler, causing an effective deadlock on the first
-illegal access.
-
-This was broken since the code was introduced in 5433acd81e87 ("MIPS:
-ralink: add illegal access driver"), but only exposed when the Kconfig
-symbol was added, thus enabling the code.
-
-Cc: <stable@vger.kernel.org> [3.18+]
-Fixes: a7b7aad383c ("MIPS: ralink: add missing symbol for RALINK_ILL_ACC")
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/ralink/ill_acc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/ralink/ill_acc.c
-+++ b/arch/mips/ralink/ill_acc.c
-@@ -41,7 +41,7 @@ static irqreturn_t ill_acc_irq_handler(i
- addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M,
- type & ILL_ACC_LEN_M);
-
-- rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE);
-+ rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE);
-
- return IRQ_HANDLED;
- }
diff --git a/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch b/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch
deleted file mode 100644
index 520c570ee2..0000000000
--- a/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/arch/mips/kernel/setup.c
-+++ b/arch/mips/kernel/setup.c
-@@ -675,7 +675,6 @@ static void __init arch_mem_init(char **
- crashk_res.end - crashk_res.start + 1,
- BOOTMEM_DEFAULT);
- #endif
-- device_tree_init();
- sparse_init();
- plat_swiotlb_setup();
- paging_init();
-@@ -784,6 +783,7 @@ void __init setup_arch(char **cmdline_p)
- prefill_possible_map();
-
- cpu_cache_init();
-+ device_tree_init();
- }
-
- unsigned long kernelsp[NR_CPUS];
diff --git a/target/linux/ramips/patches-3.18/0067-disable_illacc.patch b/target/linux/ramips/patches-3.18/0067-disable_illacc.patch
deleted file mode 100644
index 590b501bf2..0000000000
--- a/target/linux/ramips/patches-3.18/0067-disable_illacc.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -13,9 +13,9 @@ config CLKEVT_RT3352
- select CEVT_SYSTICK_QUIRK
-
- config RALINK_ILL_ACC
-- bool
-+ bool "illegal access irq"
- depends on SOC_RT305X
-- default y
-+ default n
-
- config IRQ_INTC
- bool
diff --git a/target/linux/ramips/patches-3.18/0068-non-pci-mt7620.patch b/target/linux/ramips/patches-3.18/0068-non-pci-mt7620.patch
deleted file mode 100644
index ce56ae2002..0000000000
--- a/target/linux/ramips/patches-3.18/0068-non-pci-mt7620.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -513,9 +513,6 @@ void prom_soc_init(struct ralink_soc_inf
- ralink_soc = MT762X_SOC_MT7620N;
- name = "MT7620N";
- soc_info->compatible = "ralink,mt7620n-soc";
--#ifdef CONFIG_PCI
-- panic("mt7620n is only supported for non pci kernels");
--#endif
- }
- } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
- ralink_soc = MT762X_SOC_MT7628AN;
diff --git a/target/linux/ramips/patches-3.18/0069-no-pm_poweroff.patch b/target/linux/ramips/patches-3.18/0069-no-pm_poweroff.patch
deleted file mode 100644
index fedfe37154..0000000000
--- a/target/linux/ramips/patches-3.18/0069-no-pm_poweroff.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/ralink/reset.c
-+++ b/arch/mips/ralink/reset.c
-@@ -98,7 +98,6 @@ static int __init mips_reboot_setup(void
- {
- _machine_restart = ralink_restart;
- _machine_halt = ralink_halt;
-- pm_power_off = ralink_halt;
-
- return 0;
- }
diff --git a/target/linux/ramips/patches-3.18/0072-mt7621-add-highmem.patch b/target/linux/ramips/patches-3.18/0072-mt7621-add-highmem.patch
deleted file mode 100644
index 0a98151113..0000000000
--- a/target/linux/ramips/patches-3.18/0072-mt7621-add-highmem.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/ralink/Kconfig
-+++ b/arch/mips/ralink/Kconfig
-@@ -51,6 +51,7 @@ choice
- select SYS_SUPPORTS_MULTITHREADING
- select SYS_SUPPORTS_SMP
- select SYS_SUPPORTS_MIPS_CMP
-+ select SYS_SUPPORTS_HIGHMEM
- select IRQ_GIC
- select HW_HAS_PCI
-
diff --git a/target/linux/ramips/patches-3.18/0301-mt7688-detect.patch b/target/linux/ramips/patches-3.18/0301-mt7688-detect.patch
deleted file mode 100644
index 1fddf11dc3..0000000000
--- a/target/linux/ramips/patches-3.18/0301-mt7688-detect.patch
+++ /dev/null
@@ -1,114 +0,0 @@
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -17,6 +17,7 @@
-
- #define SYSC_REG_CHIP_NAME0 0x00
- #define SYSC_REG_CHIP_NAME1 0x04
-+#define SYSC_REG_EFUSE_CFG 0x08
- #define SYSC_REG_CHIP_REV 0x0c
- #define SYSC_REG_SYSTEM_CONFIG0 0x10
- #define SYSC_REG_SYSTEM_CONFIG1 0x14
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -43,6 +43,9 @@
- #define CLKCFG_FFRAC_MASK 0x001f
- #define CLKCFG_FFRAC_USB_VAL 0x0003
-
-+/* EFUSE bits */
-+#define EFUSE_MT7688 0x100000
-+
- /* does the board have sdram or ddram */
- static int dram_type;
-
-@@ -391,7 +394,7 @@ void __init ralink_clk_init(void)
- #define RINT(x) ((x) / 1000000)
- #define RFRAC(x) (((x) / 1000) % 1000)
-
-- if (ralink_soc == MT762X_SOC_MT7628AN) {
-+ if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688) {
- if (xtal_rate == MHZ(40))
- cpu_rate = MHZ(580);
- else
-@@ -436,7 +439,8 @@ void __init ralink_clk_init(void)
- ralink_clk_add("10000e00.uart2", periph_rate);
- ralink_clk_add("10180000.wmac", xtal_rate);
-
-- if (IS_ENABLED(CONFIG_USB) && ralink_soc != MT762X_SOC_MT7628AN) {
-+ if (IS_ENABLED(CONFIG_USB) &&
-+ (ralink_soc == MT762X_SOC_MT7620A || ralink_soc == MT762X_SOC_MT7620N)) {
- /*
- * When the CPU goes into sleep mode, the BUS clock will be too low for
- * USB to function properly
-@@ -533,8 +537,15 @@ void prom_soc_init(struct ralink_soc_inf
- soc_info->compatible = "ralink,mt7620n-soc";
- }
- } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
-- ralink_soc = MT762X_SOC_MT7628AN;
-- name = "MT7628AN";
-+ u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
-+
-+ if (efuse & EFUSE_MT7688) {
-+ ralink_soc = MT762X_SOC_MT7688;
-+ name = "MT7688";
-+ } else {
-+ ralink_soc = MT762X_SOC_MT7628AN;
-+ name = "MT7628AN";
-+ }
- soc_info->compatible = "ralink,mt7628an-soc";
- } else {
- panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
-@@ -548,13 +559,13 @@ void prom_soc_init(struct ralink_soc_inf
-
- cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
-
-- if (ralink_soc == MT762X_SOC_MT7628AN)
-+ if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688)
- dram_type = ((cfg0&0x00000001) == 0x00000001)?SYSCFG0_DRAM_TYPE_DDR1_MT7628:SYSCFG0_DRAM_TYPE_DDR2_MT7628;
- else
- dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
-
- soc_info->mem_base = MT7620_DRAM_BASE;
-- if (ralink_soc == MT762X_SOC_MT7628AN)
-+ if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688)
- mt7628_dram_init(soc_info);
- else
- mt7620_dram_init(soc_info);
-@@ -567,7 +578,7 @@ void prom_soc_init(struct ralink_soc_inf
- pr_info("Digital PMU set to %s control\n",
- (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
-
-- if (ralink_soc == MT762X_SOC_MT7628AN)
-+ if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688)
- rt2880_pinmux_data = mt7628an_pinmux_data;
- else
- rt2880_pinmux_data = mt7620a_pinmux_data;
---- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
-+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
-@@ -24,6 +24,7 @@ enum ralink_soc_type {
- MT762X_SOC_MT7620N,
- MT762X_SOC_MT7621AT,
- MT762X_SOC_MT7628AN,
-+ MT762X_SOC_MT7688,
- };
- extern enum ralink_soc_type ralink_soc;
-
---- a/drivers/net/ethernet/ralink/esw_rt3052.c
-+++ b/drivers/net/ethernet/ralink/esw_rt3052.c
-@@ -611,7 +611,7 @@ static void esw_hw_init(struct rt305x_es
- rt305x_mii_write(esw, 0, 29, 0x598b);
- /* select local register */
- rt305x_mii_write(esw, 0, 31, 0x8000);
-- } else if (ralink_soc == MT762X_SOC_MT7628AN) {
-+ } else if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688) {
- int i;
- // u32 phy_val;
- u32 val;
-@@ -1042,7 +1042,7 @@ esw_get_port_tr_badgood(struct switch_de
- int shift = attr->id == RT5350_ESW_ATTR_PORT_TR_GOOD ? 0 : 16;
- u32 reg;
-
-- if ((ralink_soc != RT305X_SOC_RT5350) && (ralink_soc != MT762X_SOC_MT7628AN))
-+ if ((ralink_soc != RT305X_SOC_RT5350) && (ralink_soc != MT762X_SOC_MT7628AN) && (ralink_soc != MT762X_SOC_MT7688))
- return -EINVAL;
-
- if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN)
diff --git a/target/linux/ramips/patches-3.18/0302-mt762x-vendor-id.patch b/target/linux/ramips/patches-3.18/0302-mt762x-vendor-id.patch
deleted file mode 100644
index ca56f5cb49..0000000000
--- a/target/linux/ramips/patches-3.18/0302-mt762x-vendor-id.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -552,7 +552,7 @@ void prom_soc_init(struct ralink_soc_inf
- }
-
- snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
-- "Ralink %s ver:%u eco:%u",
-+ "MediaTek %s ver:%u eco:%u",
- name,
- (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
- (rev & CHIP_REV_ECO_MASK));
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -185,7 +185,7 @@ void prom_soc_init(struct ralink_soc_inf
- rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
-
- snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
-- "Mediatek %s ver:%u eco:%u",
-+ "MediaTek %s ver:%u eco:%u",
- name,
- (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
- (rev & CHIP_REV_ECO_MASK));
diff --git a/target/linux/ramips/patches-3.18/0304-baud_250000.patch b/target/linux/ramips/patches-3.18/0304-baud_250000.patch
deleted file mode 100644
index 6a364c06c6..0000000000
--- a/target/linux/ramips/patches-3.18/0304-baud_250000.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -356,6 +356,9 @@ uart_get_baud_rate(struct uart_port *por
- else if (flags == UPF_SPD_WARP)
- altbaud = 460800;
-
-+ if (tty_termios_baud_rate(termios) == 2500000)
-+ return 250000;
-+
- for (try = 0; try < 2; try++) {
- baud = tty_termios_baud_rate(termios);
-
diff --git a/target/linux/ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patch b/target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch
index 23d32681bf..504c572b52 100644
--- a/target/linux/ramips/patches-3.18/0012-MIPS-ralink-add-MT7621-support.patch
+++ b/target/linux/ramips/patches-4.3/0001-arch-mips-ralink-add-mt7621-support.patch
@@ -1,27 +1,30 @@
-From c8c69923236f2f3f184ddcc7eb41c113b5cc3223 Mon Sep 17 00:00:00 2001
+From 450b6e8257e22708173d0c1c86d34394fba0c5eb Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
-Date: Sun, 27 Jul 2014 10:57:40 +0100
-Subject: [PATCH 12/57] MIPS: ralink: add MT7621 support
+Date: Mon, 7 Dec 2015 17:08:31 +0100
+Subject: [PATCH 01/53] arch: mips: ralink: add mt7621 support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
- arch/mips/include/asm/gic.h | 4 +
arch/mips/include/asm/mach-ralink/irq.h | 9 +
arch/mips/include/asm/mach-ralink/mt7621.h | 39 ++++
+ arch/mips/kernel/mips-cm.c | 4 +-
arch/mips/kernel/vmlinux.lds.S | 1 +
arch/mips/ralink/Kconfig | 18 ++
arch/mips/ralink/Makefile | 7 +-
arch/mips/ralink/Platform | 5 +
- arch/mips/ralink/irq-gic.c | 271 ++++++++++++++++++++++++++++
+ arch/mips/ralink/irq-gic.c | 268 ++++++++++++++++++++++++++++
arch/mips/ralink/malta-amon.c | 81 +++++++++
- arch/mips/ralink/mt7621.c | 183 +++++++++++++++++++
- 10 files changed, 617 insertions(+), 1 deletion(-)
+ arch/mips/ralink/mt7621.c | 209 ++++++++++++++++++++++
+ 10 files changed, 638 insertions(+), 3 deletions(-)
create mode 100644 arch/mips/include/asm/mach-ralink/irq.h
create mode 100644 arch/mips/include/asm/mach-ralink/mt7621.h
create mode 100644 arch/mips/ralink/irq-gic.c
create mode 100644 arch/mips/ralink/malta-amon.c
create mode 100644 arch/mips/ralink/mt7621.c
+diff --git a/arch/mips/include/asm/mach-ralink/irq.h b/arch/mips/include/asm/mach-ralink/irq.h
+new file mode 100644
+index 0000000..4321865
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/irq.h
@@ -0,0 +1,9 @@
@@ -34,6 +37,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+#include_next <irq.h>
+
+#endif
+diff --git a/arch/mips/include/asm/mach-ralink/mt7621.h b/arch/mips/include/asm/mach-ralink/mt7621.h
+new file mode 100644
+index 0000000..21c8dc2
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
@@ -0,0 +1,39 @@
@@ -76,6 +82,30 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
+
+#endif
+diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c
+index b8ceee5..b97de1d 100644
+--- a/arch/mips/kernel/mips-cm.c
++++ b/arch/mips/kernel/mips-cm.c
+@@ -232,7 +232,7 @@ int mips_cm_probe(void)
+ write_gcr_base(base_reg);
+
+ /* disable CM regions */
+- write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
++/* write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
+ write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
+ write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
+ write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
+@@ -240,7 +240,7 @@ int mips_cm_probe(void)
+ write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
+ write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
+ write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
+-
++*/
+ /* probe for an L2-only sync region */
+ mips_cm_probe_l2sync();
+
+diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
+index 07d32a4..86c6284 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -51,6 +51,7 @@ SECTIONS
@@ -86,6 +116,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index e9bc8c9..d078e61 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -12,6 +12,11 @@ config RALINK_ILL_ACC
@@ -100,9 +132,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
choice
prompt "Ralink SoC selection"
default SOC_RT305X
-@@ -33,6 +38,15 @@ choice
+@@ -34,6 +39,15 @@ choice
config SOC_MT7620
- bool "MT7620"
+ bool "MT7620/8"
+ config SOC_MT7621
+ bool "MT7621"
@@ -116,7 +148,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
endchoice
choice
-@@ -64,6 +78,10 @@ choice
+@@ -65,6 +79,10 @@ choice
depends on SOC_MT7620
select BUILTIN_DTB
@@ -127,6 +159,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
endchoice
endif
+diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
+index a6c9d00..ca501db 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -6,16 +6,21 @@
@@ -152,9 +186,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
+index 6d9c8c4..6095fcc 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
-@@ -27,3 +27,8 @@ cflags-$(CONFIG_SOC_RT3883) += -I$(srctr
+@@ -27,3 +27,8 @@ cflags-$(CONFIG_SOC_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt
#
load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
cflags-$(CONFIG_SOC_MT7620) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620
@@ -163,6 +199,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+#
+load-$(CONFIG_SOC_MT7621) += 0xffffffff80001000
+cflags-$(CONFIG_SOC_MT7621) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
+diff --git a/arch/mips/ralink/irq-gic.c b/arch/mips/ralink/irq-gic.c
+new file mode 100644
+index 0000000..f1c541b
--- /dev/null
+++ b/arch/mips/ralink/irq-gic.c
@@ -0,0 +1,268 @@
@@ -434,6 +473,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+{
+ of_irq_init(of_irq_ids);
+}
+diff --git a/arch/mips/ralink/malta-amon.c b/arch/mips/ralink/malta-amon.c
+new file mode 100644
+index 0000000..1e47844
--- /dev/null
+++ b/arch/mips/ralink/malta-amon.c
@@ -0,0 +1,81 @@
@@ -518,6 +560,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ smp_rmb(); /* Target will be updating flags soon */
+ pr_debug("launch: cpu%d gone!\n", cpu);
+}
+diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
+new file mode 100644
+index 0000000..c28743b
--- /dev/null
+++ b/arch/mips/ralink/mt7621.c
@@ -0,0 +1,209 @@
@@ -708,7 +753,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
-+ "Mediatek %s ver:%u eco:%u",
++ "MediaTek %s ver:%u eco:%u",
+ name,
+ (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
+ (rev & CHIP_REV_ECO_MASK));
@@ -730,23 +775,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ if (!register_vsmp_smp_ops())
+ return;
+}
---- a/arch/mips/kernel/mips-cm.c
-+++ b/arch/mips/kernel/mips-cm.c
-@@ -105,7 +105,7 @@ int mips_cm_probe(void)
- write_gcr_base(base_reg);
-
- /* disable CM regions */
-- write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
-+/* write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
- write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
- write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
- write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
-@@ -113,7 +113,7 @@ int mips_cm_probe(void)
- write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
- write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR_MSK);
- write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK_MSK);
--
-+*/
- /* probe for an L2-only sync region */
- mips_cm_probe_l2sync();
-
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0013-MIPS-ralink-add-MT7621-defconfig.patch b/target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch
index daf27c168d..3bb7e2f2e4 100644
--- a/target/linux/ramips/patches-3.18/0013-MIPS-ralink-add-MT7621-defconfig.patch
+++ b/target/linux/ramips/patches-4.3/0002-MIPS-ralink-add-MT7621-defconfig.patch
@@ -1,7 +1,7 @@
-From 8f92eac5ace0f834ec069b4bb8e9ad38f162de0e Mon Sep 17 00:00:00 2001
+From c96f2cc4d5f6e1bb11f3e7e04a7e21503a214d7c Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 27 Jan 2014 13:12:41 +0000
-Subject: [PATCH 13/57] MIPS: ralink: add MT7621 defconfig
+Subject: [PATCH 02/53] MIPS: ralink: add MT7621 defconfig
Signed-off-by: John Crispin <blogic@openwrt.org>
---
@@ -9,6 +9,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
1 file changed, 197 insertions(+)
create mode 100644 arch/mips/configs/mt7621_defconfig
+diff --git a/arch/mips/configs/mt7621_defconfig b/arch/mips/configs/mt7621_defconfig
+new file mode 100644
+index 0000000..7719471
--- /dev/null
+++ b/arch/mips/configs/mt7621_defconfig
@@ -0,0 +1,197 @@
@@ -209,3 +212,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+CONFIG_CRC32_SARWATE=y
+# CONFIG_XZ_DEC_X86 is not set
+CONFIG_AVERAGE=y
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch b/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch
new file mode 100644
index 0000000000..e2b2ba5e00
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0003-MIPS-ralink-cleanup-early_printk.patch
@@ -0,0 +1,66 @@
+From 4d805af8246efdc330d6af9a8bd10ce892327598 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Fri, 24 Jan 2014 17:01:17 +0100
+Subject: [PATCH 03/53] MIPS: ralink: cleanup early_printk
+
+Add support for the new MT7621/8 SoC and kill ifdefs.
+Cleanup some whitespace error while we are at it.
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/early_printk.c | 25 +++++++++++++++++++++++++
+ 1 file changed, 25 insertions(+)
+
+diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
+index 255d695..c04ee53 100644
+--- a/arch/mips/ralink/early_printk.c
++++ b/arch/mips/ralink/early_printk.c
+@@ -25,11 +25,13 @@
+ #define MT7628_CHIP_NAME1 0x20203832
+
+ #define UART_REG_TX 0x04
++#define UART_REG_LCR 0x0c
+ #define UART_REG_LSR 0x14
+ #define UART_REG_LSR_RT2880 0x1c
+
+ static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE);
+ static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE);
++static int init_complete;
+
+ static inline void uart_w32(u32 val, unsigned reg)
+ {
+@@ -47,8 +49,31 @@ static inline int soc_is_mt7628(void)
+ (__raw_readl(chipid_membase) == MT7628_CHIP_NAME1);
+ }
+
++static inline void find_uart_base(void)
++{
++ int i;
++
++ if (!soc_is_mt7628())
++ return;
++
++ for (i = 0; i < 3; i++) {
++ u32 reg = uart_r32(UART_REG_LCR + (0x100 * i));
++
++ if (!reg)
++ continue;
++
++ uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE + (0x100 * i));
++ break;
++ }
++}
++
+ void prom_putchar(unsigned char ch)
+ {
++ if (!init_complete) {
++ find_uart_base();
++ init_complete = 1;
++ }
++
+ if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) {
+ uart_w32(ch, UART_TX);
+ while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0)
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0016-MIPS-ralink-add-MT7621-pcie-driver.patch b/target/linux/ramips/patches-4.3/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
index 2154e8a319..b605c5efda 100644
--- a/target/linux/ramips/patches-3.18/0016-MIPS-ralink-add-MT7621-pcie-driver.patch
+++ b/target/linux/ramips/patches-4.3/0004-MIPS-ralink-add-MT7621-pcie-driver.patch
@@ -1,25 +1,25 @@
-From 95d7eb13a864ef666cea7f0e86349e86d80d28ce Mon Sep 17 00:00:00 2001
+From fec11d4e8dc5cc79bcd7c8fd55038ac21ac39965 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 05:22:39 +0000
-Subject: [PATCH 16/57] MIPS: ralink: add MT7621 pcie driver
+Subject: [PATCH 04/53] MIPS: ralink: add MT7621 pcie driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/pci/Makefile | 1 +
- arch/mips/pci/pci-mt7621.c | 797 ++++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 798 insertions(+)
+ arch/mips/pci/pci-mt7621.c | 813 ++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 814 insertions(+)
create mode 100644 arch/mips/pci/pci-mt7621.c
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
+@@ -43,6 +43,7 @@
obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
+obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
+ obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
- obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
--- /dev/null
+++ b/arch/mips/pci/pci-mt7621.c
@@ -0,0 +1,813 @@
@@ -97,12 +97,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
+#define RALINK_PCI_CONFIG_ADDR 0x20
+#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24
-+#define SURFBOARDINT_PCIE0 12 /* PCIE0 */
++#define SURFBOARDINT_PCIE0 11 /* PCIE0 */
+#define RALINK_INT_PCIE0 SURFBOARDINT_PCIE0
+#define RALINK_INT_PCIE1 SURFBOARDINT_PCIE1
+#define RALINK_INT_PCIE2 SURFBOARDINT_PCIE2
-+#define SURFBOARDINT_PCIE1 32 /* PCIE1 */
-+#define SURFBOARDINT_PCIE2 33 /* PCIE2 */
++#define SURFBOARDINT_PCIE1 31 /* PCIE1 */
++#define SURFBOARDINT_PCIE2 32 /* PCIE2 */
+#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028)
+#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C)
+#define RALINK_PCIE0_RST (1<<24)
diff --git a/target/linux/ramips/patches-4.3/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-4.3/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
new file mode 100644
index 0000000000..fe918e6fd3
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0005-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch
@@ -0,0 +1,88 @@
+From ce3d4a4111a5f7e6b4e74bceae5faa6ce388e8ec Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 14 Jul 2013 23:08:11 +0200
+Subject: [PATCH 05/53] MIPS: use set_mode() to enable/disable the cevt-r4k
+ irq
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Kconfig | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index d078e61..c2778f2 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -1,11 +1,16 @@
+ if RALINK
+
++config CEVT_SYSTICK_QUIRK
++ bool
++ default n
++
+ config CLKEVT_RT3352
+ bool
+ depends on SOC_RT305X || SOC_MT7620
+ default y
+ select CLKSRC_OF
+ select CLKSRC_MMIO
++ select CEVT_SYSTICK_QUIRK
+
+ config RALINK_ILL_ACC
+ bool
+--- a/arch/mips/kernel/cevt-r4k.c
++++ b/arch/mips/kernel/cevt-r4k.c
+@@ -15,6 +15,26 @@
+ #include <asm/time.h>
+ #include <asm/cevt-r4k.h>
+
++static int mips_state_oneshot(struct clock_event_device *evt)
++{
++ if (!cp0_timer_irq_installed) {
++ cp0_timer_irq_installed = 1;
++ setup_irq(evt->irq, &c0_compare_irqaction);
++ }
++
++ return 0;
++}
++
++static int mips_state_shutdown(struct clock_event_device *evt)
++{
++ if (cp0_timer_irq_installed) {
++ cp0_timer_irq_installed = 0;
++ remove_irq(evt->irq, &c0_compare_irqaction);
++ }
++
++ return 0;
++}
++
+ static int mips_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+ {
+@@ -208,18 +228,21 @@
+ cd->rating = 300;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of(cpu);
++ cd->set_state_shutdown = mips_state_shutdown;
++ cd->set_state_oneshot = mips_state_oneshot;
+ cd->set_next_event = mips_next_event;
+ cd->event_handler = mips_event_handler;
+
+ clockevents_register_device(cd);
+
++#ifndef CONFIG_CEVT_SYSTICK_QUIRK
+ if (cp0_timer_irq_installed)
+ return 0;
+
+ cp0_timer_irq_installed = 1;
+
+ setup_irq(irq, &c0_compare_irqaction);
+-
++#endif
+ return 0;
+ }
+
+--
+1.7.10.4
+
+
diff --git a/target/linux/ramips/patches-3.18/0021-MIPS-ralink-add-cpu-frequency-scaling.patch b/target/linux/ramips/patches-4.3/0006-MIPS-ralink-add-cpu-frequency-scaling.patch
index 0e567cb2f0..afdc65a3c8 100644
--- a/target/linux/ramips/patches-3.18/0021-MIPS-ralink-add-cpu-frequency-scaling.patch
+++ b/target/linux/ramips/patches-4.3/0006-MIPS-ralink-add-cpu-frequency-scaling.patch
@@ -1,16 +1,18 @@
-From e76ecd496c9b074ab21b17f12494d823a407e89a Mon Sep 17 00:00:00 2001
+From bd30f19a006fb52bac80c6463c49dd2f4159f4ac Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 16:26:41 +0200
-Subject: [PATCH 21/57] MIPS: ralink: add cpu frequency scaling
+Subject: [PATCH 06/53] MIPS: ralink: add cpu frequency scaling
This feature will break udelay() and cause the delay loop to have longer delays
when the frequency is scaled causing a performance hit.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
- arch/mips/ralink/cevt-rt3352.c | 36 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
+ arch/mips/ralink/cevt-rt3352.c | 38 ++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c
+index a8e70a9..b36888c 100644
--- a/arch/mips/ralink/cevt-rt3352.c
+++ b/arch/mips/ralink/cevt-rt3352.c
@@ -29,6 +29,10 @@
@@ -24,18 +26,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
struct systick_device {
void __iomem *membase;
struct clock_event_device dev;
-@@ -36,6 +40,8 @@ struct systick_device {
+@@ -36,9 +40,26 @@ struct systick_device {
int freq_scale;
};
+static void (*systick_freq_scaling)(struct systick_device *sdev, int status);
+
- static void systick_set_clock_mode(enum clock_event_mode mode,
- struct clock_event_device *evt);
-
-@@ -87,6 +93,21 @@ static struct irqaction systick_irqactio
- .dev_id = &systick.dev,
- };
+ static int systick_set_oneshot(struct clock_event_device *evt);
+ static int systick_shutdown(struct clock_event_device *evt);
+static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
+{
@@ -52,25 +50,27 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
+}
+
- static void systick_set_clock_mode(enum clock_event_mode mode,
+ static int systick_next_event(unsigned long delta,
struct clock_event_device *evt)
{
-@@ -101,9 +122,13 @@ static void systick_set_clock_mode(enum
- sdev->irq_requested = 1;
- iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
- systick.membase + SYSTICK_CONFIG);
-+ if (systick_freq_scaling)
-+ systick_freq_scaling(sdev, 1);
- break;
+@@ -99,6 +120,9 @@ static int systick_shutdown(struct clock_event_device *evt)
+ sdev->irq_requested = 0;
+ iowrite32(0, systick.membase + SYSTICK_CONFIG);
+
++ if (systick_freq_scaling)
++ systick_freq_scaling(sdev, 0);
++
+ return 0;
+ }
+
+@@ -114,15 +138,29 @@ static int systick_set_oneshot(struct clock_event_device *evt)
+ iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
+ systick.membase + SYSTICK_CONFIG);
- case CLOCK_EVT_MODE_SHUTDOWN:
-+ if (systick_freq_scaling)
-+ systick_freq_scaling(sdev, 0);
- if (sdev->irq_requested)
- free_irq(systick.dev.irq, &systick_irqaction);
- sdev->irq_requested = 0;
-@@ -116,12 +141,23 @@ static void systick_set_clock_mode(enum
- }
++ if (systick_freq_scaling)
++ systick_freq_scaling(sdev, 1);
++
+ return 0;
}
+static const struct of_device_id systick_match[] = {
@@ -93,3 +93,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
systick_irqaction.name = np->name;
systick.dev.name = np->name;
clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0022-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch b/target/linux/ramips/patches-4.3/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch
index 96617e8e65..6b09c0e894 100644
--- a/target/linux/ramips/patches-3.18/0022-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch
+++ b/target/linux/ramips/patches-4.3/0007-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch
@@ -1,21 +1,26 @@
-From ec26251ea980b1ee88733f178a4e86e3c70fd244 Mon Sep 17 00:00:00 2001
+From 67b7bff0fd364c194e653f69baa623ba2141bd4c Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 4 Aug 2014 18:46:02 +0200
-Subject: [PATCH 22/57] MIPS: ralink: copy the commandline from the devicetree
+Subject: [PATCH 07/53] MIPS: ralink: copy the commandline from the devicetree
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/ralink/of.c | 2 ++
1 file changed, 2 insertions(+)
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index 0d30dcd..da85bbf 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
-@@ -74,6 +74,8 @@ void __init plat_mem_setup(void)
- */
- __dt_setup_arch(__dtb_start);
+@@ -76,6 +76,8 @@ void __init plat_mem_setup(void)
+
+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+
of_scan_flat_dt(early_init_dt_find_memory, NULL);
if (memory_dtb)
of_scan_flat_dt(early_init_dt_scan_memory, NULL);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0023-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch b/target/linux/ramips/patches-4.3/0008-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch
index f3dead3859..6fa90f245e 100644
--- a/target/linux/ramips/patches-3.18/0023-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch
+++ b/target/linux/ramips/patches-4.3/0008-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch
@@ -1,7 +1,7 @@
-From 1f1c12e85defba9459b41ec95b86f23b4791f1ab Mon Sep 17 00:00:00 2001
+From 0fd52df8bce3be9edbc195b120bc9a68f970d9e5 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 4 Aug 2014 20:43:25 +0200
-Subject: [PATCH 23/57] MIPS: ralink: mt7620: fix usb issue during frequency
+Subject: [PATCH 08/53] MIPS: ralink: mt7620: fix usb issue during frequency
scaling
If the USB HCD is running and the cpu is scaled too low, then the USB stops
@@ -15,11 +15,13 @@ Subject: [PATCH 23/57] MIPS: ralink: mt7620: fix usb issue during frequency
arch/mips/ralink/mt7620.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 2ea5ff6..33a7e42 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
-@@ -36,6 +36,12 @@
- #define PMU1_CFG 0x8C
- #define DIG_SW_SEL BIT(25)
+@@ -40,6 +40,12 @@
+ /* is this a MT7620 or a MT7628 */
+ enum mt762x_soc_type mt762x_soc;
+/* clock scaling */
+#define CLKCFG_FDIV_MASK 0x1f00
@@ -30,7 +32,7 @@ Subject: [PATCH 23/57] MIPS: ralink: mt7620: fix usb issue during frequency
/* does the board have sdram or ddram */
static int dram_type;
-@@ -337,6 +343,19 @@ void __init ralink_clk_init(void)
+@@ -423,6 +429,19 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000c00.uartlite", periph_rate);
ralink_clk_add("10180000.wmac", xtal_rate);
@@ -50,3 +52,6 @@ Subject: [PATCH 23/57] MIPS: ralink: mt7620: fix usb issue during frequency
}
void __init ralink_of_remap(void)
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch b/target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch
index c20a5df55e..2f03f1d496 100644
--- a/target/linux/ramips/patches-3.18/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch
+++ b/target/linux/ramips/patches-4.3/0009-PCI-MIPS-adds-mt7620a-pcie-driver.patch
@@ -1,26 +1,44 @@
-From 307b7a71a634ae3848fb7c5c05759d647e140e12 Mon Sep 17 00:00:00 2001
+From 41aa7fc236fdb1f4c9b8b10df9b71f0d248cb36b Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
-Date: Sat, 18 May 2013 22:06:15 +0200
-Subject: [PATCH 32/57] PCI: MIPS: adds mt7620a pcie driver
+Date: Mon, 7 Dec 2015 17:11:12 +0100
+Subject: [PATCH 09/53] PCI: MIPS: adds mt7620a pcie driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
- arch/mips/pci/Makefile | 1 +
- arch/mips/pci/pci-mt7620.c | 363 +++++++++++++++++++++++++++++++++++++++++++
- arch/mips/ralink/Kconfig | 1 +
- 3 files changed, 365 insertions(+)
+ arch/mips/include/asm/mach-ralink/mt7620.h | 1 +
+ arch/mips/pci/Makefile | 1 +
+ arch/mips/pci/pci-mt7620.c | 396 ++++++++++++++++++++++++++++
+ arch/mips/ralink/Kconfig | 1 +
+ 4 files changed, 399 insertions(+)
create mode 100644 arch/mips/pci/pci-mt7620.c
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+index 1976fb8..72e64fa 100644
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -19,6 +19,7 @@ enum mt762x_soc_type {
+ MT762X_SOC_MT7620N,
+ MT762X_SOC_MT7628AN,
+ };
++extern enum mt762x_soc_type mt762x_soc;
+
+ #define MT7620_SYSC_BASE 0x10000000
+
+diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
+index 04e61c3..ccbdc90 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
-@@ -43,6 +43,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops
+@@ -43,6 +43,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
+ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
- obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
+obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o
- obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
+ obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
+ obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
- obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
+diff --git a/arch/mips/pci/pci-mt7620.c b/arch/mips/pci/pci-mt7620.c
+new file mode 100644
+index 0000000..780e4e9
--- /dev/null
+++ b/arch/mips/pci/pci-mt7620.c
@@ -0,0 +1,396 @@
@@ -420,6 +438,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+}
+
+arch_initcall(mt7620_pci_init);
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index c2778f2..2aa5e42 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -43,6 +43,7 @@ choice
@@ -430,13 +450,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
config SOC_MT7621
bool "MT7621"
---- a/arch/mips/include/asm/mach-ralink/mt7620.h
-+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -19,6 +19,7 @@ enum mt762x_soc_type {
- MT762X_SOC_MT7620N,
- MT762X_SOC_MT7628AN,
- };
-+extern enum mt762x_soc_type mt762x_soc;
-
- #define MT7620_SYSC_BASE 0x10000000
-
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0051-SPI-ralink-add-Ralink-SoC-spi-clocks.patch b/target/linux/ramips/patches-4.3/0010-arch-mips-ralink-add-spi1-clocks.patch
index bca872fea4..e2a7d821ef 100644
--- a/target/linux/ramips/patches-3.18/0051-SPI-ralink-add-Ralink-SoC-spi-clocks.patch
+++ b/target/linux/ramips/patches-4.3/0010-arch-mips-ralink-add-spi1-clocks.patch
@@ -1,23 +1,43 @@
+From 39ce22c870f4503bed5e451acfcab21eba3b6239 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:49:07 +0100
+Subject: [PATCH 10/53] arch: mips: ralink: add spi1 clocks
+
+based on f3bc64d6d1f21c1b92d75f233a37b75d77af6963
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c | 1 +
+ arch/mips/ralink/rt305x.c | 1 +
+ arch/mips/ralink/rt3883.c | 1 +
+ 3 files changed, 3 insertions(+)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 33a7e42..0ba49a1 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
-@@ -415,6 +415,7 @@ void __init ralink_clk_init(void)
+@@ -427,6 +427,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000100.timer", periph_rate);
ralink_clk_add("10000120.watchdog", periph_rate);
ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000b40.spi", sys_rate);
ralink_clk_add("10000c00.uartlite", periph_rate);
- ralink_clk_add("10000d00.uart1", periph_rate);
- ralink_clk_add("10000e00.uart2", periph_rate);
+ ralink_clk_add("10180000.wmac", xtal_rate);
+
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index c40776a..eeb747a 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
-@@ -201,6 +201,7 @@ void __init ralink_clk_init(void)
+@@ -202,6 +202,7 @@ void __init ralink_clk_init(void)
+
ralink_clk_add("cpu", cpu_rate);
- ralink_clk_add("sys", sys_rate);
ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000b40.spi", sys_rate);
ralink_clk_add("10000100.timer", wdt_rate);
ralink_clk_add("10000120.watchdog", wdt_rate);
ralink_clk_add("10000500.uart", uart_rate);
+diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
+index 86a535c..26827bc 100644
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -109,6 +109,7 @@ void __init ralink_clk_init(void)
@@ -28,3 +48,6 @@
ralink_clk_add("10000c00.uartlite", 40000000);
ralink_clk_add("10100000.ethernet", sys_rate);
ralink_clk_add("10180000.wmac", 40000000);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0060-soc_type.patch b/target/linux/ramips/patches-4.3/0011-arch-mips-ralink-unify-soc-detection.patch
index 41cc1208c3..bee7ce3b28 100644
--- a/target/linux/ramips/patches-3.18/0060-soc_type.patch
+++ b/target/linux/ramips/patches-4.3/0011-arch-mips-ralink-unify-soc-detection.patch
@@ -1,3 +1,19 @@
+From 22ee5168a5dfeda748cabd0bbf728d6bdc6b925b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:12:38 +0100
+Subject: [PATCH 11/53] arch: mips: ralink: unify soc detection
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/mach-ralink/mt7620.h | 8 --------
+ arch/mips/include/asm/mach-ralink/ralink_regs.h | 14 ++++++++++++++
+ arch/mips/include/asm/mach-ralink/rt305x.h | 21 ++++++---------------
+ arch/mips/ralink/prom.c | 5 ++++-
+ arch/mips/ralink/rt305x.c | 12 +++++-------
+ 5 files changed, 29 insertions(+), 31 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+index 72e64fa..0ef882b 100644
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -13,14 +13,6 @@
@@ -15,6 +31,8 @@
#define MT7620_SYSC_BASE 0x10000000
#define SYSC_REG_CHIP_NAME0 0x00
+diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
+index bd93014..8fcbd0f 100644
--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
@@ -13,6 +13,20 @@
@@ -38,6 +56,8 @@
extern __iomem void *rt_sysc_membase;
extern __iomem void *rt_memc_membase;
+diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
+index 96f731b..2eea793 100644
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -13,25 +13,16 @@
@@ -90,76 +110,27 @@
}
#define RT305X_SYSC_BASE 0x10000000
---- a/arch/mips/ralink/mt7620.c
-+++ b/arch/mips/ralink/mt7620.c
-@@ -43,8 +43,6 @@
- #define CLKCFG_FFRAC_MASK 0x001f
- #define CLKCFG_FFRAC_USB_VAL 0x0003
+diff --git a/arch/mips/ralink/prom.c b/arch/mips/ralink/prom.c
+index 09419f6..d0978d5 100644
+--- a/arch/mips/ralink/prom.c
++++ b/arch/mips/ralink/prom.c
+@@ -15,10 +15,13 @@
+ #include <asm/bootinfo.h>
+ #include <asm/addrspace.h>
--enum mt762x_soc_type mt762x_soc;
--
- /* does the board have sdram or ddram */
- static int dram_type;
-
-@@ -375,7 +373,7 @@ void __init ralink_clk_init(void)
- #define RINT(x) ((x) / 1000000)
- #define RFRAC(x) (((x) / 1000) % 1000)
-
-- if (mt762x_soc == MT762X_SOC_MT7628AN) {
-+ if (ralink_soc == MT762X_SOC_MT7628AN) {
- if (xtal_rate == MHZ(40))
- cpu_rate = MHZ(580);
- else
-@@ -420,7 +418,7 @@ void __init ralink_clk_init(void)
- ralink_clk_add("10000e00.uart2", periph_rate);
- ralink_clk_add("10180000.wmac", xtal_rate);
-
-- if (IS_ENABLED(CONFIG_USB) && mt762x_soc != MT762X_SOC_MT7628AN) {
-+ if (IS_ENABLED(CONFIG_USB) && ralink_soc != MT762X_SOC_MT7628AN) {
- /*
- * When the CPU goes into sleep mode, the BUS clock will be too low for
- * USB to function properly
-@@ -508,11 +506,11 @@ void prom_soc_init(struct ralink_soc_inf
-
- if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
- if (bga) {
-- mt762x_soc = MT762X_SOC_MT7620A;
-+ ralink_soc = MT762X_SOC_MT7620A;
- name = "MT7620A";
- soc_info->compatible = "ralink,mt7620a-soc";
- } else {
-- mt762x_soc = MT762X_SOC_MT7620N;
-+ ralink_soc = MT762X_SOC_MT7620N;
- name = "MT7620N";
- soc_info->compatible = "ralink,mt7620n-soc";
- #ifdef CONFIG_PCI
-@@ -520,7 +518,7 @@ void prom_soc_init(struct ralink_soc_inf
- #endif
- }
- } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
-- mt762x_soc = MT762X_SOC_MT7628AN;
-+ ralink_soc = MT762X_SOC_MT7628AN;
- name = "MT7628AN";
- soc_info->compatible = "ralink,mt7628an-soc";
- } else {
-@@ -537,7 +535,7 @@ void prom_soc_init(struct ralink_soc_inf
- dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
-
- soc_info->mem_base = MT7620_DRAM_BASE;
-- if (mt762x_soc == MT762X_SOC_MT7628AN)
-+ if (ralink_soc == MT762X_SOC_MT7628AN)
- mt7628_dram_init(soc_info);
- else
- mt7620_dram_init(soc_info);
-@@ -550,7 +548,7 @@ void prom_soc_init(struct ralink_soc_inf
- pr_info("Digital PMU set to %s control\n",
- (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
-
-- if (mt762x_soc == MT762X_SOC_MT7628AN)
-+ if (ralink_soc == MT762X_SOC_MT7628AN)
- rt2880_pinmux_data = mt7628an_pinmux_data;
- else
- rt2880_pinmux_data = mt7620a_pinmux_data;
++#include <asm/mach-ralink/ralink_regs.h>
++
+ #include "common.h"
+
+ struct ralink_soc_info soc_info;
+-struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
++enum ralink_soc_type ralink_soc;
++EXPORT_SYMBOL_GPL(ralink_soc);
+
+ const char *get_system_type(void)
+ {
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index eeb747a..51f33a5 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -21,8 +21,6 @@
@@ -171,7 +142,7 @@
static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) };
static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) };
static struct rt2880_pmx_func uartf_func[] = {
-@@ -234,24 +232,24 @@ void prom_soc_init(struct ralink_soc_inf
+@@ -236,24 +234,24 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
icache_sets = (read_c0_config1() >> 22) & 7;
if (icache_sets == 1) {
@@ -201,29 +172,6 @@
name = "RT5350";
soc_info->compatible = "ralink,rt5350-soc";
} else {
---- a/arch/mips/ralink/prom.c
-+++ b/arch/mips/ralink/prom.c
-@@ -15,9 +15,13 @@
- #include <asm/bootinfo.h>
- #include <asm/addrspace.h>
-
-+#include <asm/mach-ralink/ralink_regs.h>
-+
- #include "common.h"
-
- struct ralink_soc_info soc_info;
-+enum ralink_soc_type ralink_soc;
-+EXPORT_SYMBOL_GPL(ralink_soc);
-
- const char *get_system_type(void)
- {
---- a/arch/mips/ralink/mt7621.c
-+++ b/arch/mips/ralink/mt7621.c
-@@ -193,6 +193,7 @@ void prom_soc_init(struct ralink_soc_inf
- soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN;
- soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX;
- soc_info->mem_base = MT7621_DRAM_BASE;
-+ ralink_soc = MT762X_SOC_MT7621AT;
-
- rt2880_pinmux_data = mt7621_pinmux_data;
-
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0012-arch-mips-fix-clock-jitter.patch b/target/linux/ramips/patches-4.3/0012-arch-mips-fix-clock-jitter.patch
new file mode 100644
index 0000000000..58983f0c2f
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0012-arch-mips-fix-clock-jitter.patch
@@ -0,0 +1,26 @@
+From 2a7f11a3a569159e97b7c5134c4d1f3f5b253637 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:14:42 +0100
+Subject: [PATCH 12/53] arch: mips: fix clock jitter
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/cevt-rt3352.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c
+index b36888c..cecf44f 100644
+--- a/arch/mips/ralink/cevt-rt3352.c
++++ b/arch/mips/ralink/cevt-rt3352.c
+@@ -69,7 +69,7 @@ static int systick_next_event(unsigned long delta,
+ sdev = container_of(evt, struct systick_device, dev);
+ count = ioread32(sdev->membase + SYSTICK_COUNT);
+ count = (count + delta) % SYSTICK_FREQ;
+- iowrite32(count + delta, sdev->membase + SYSTICK_COMPARE);
++ iowrite32(count, sdev->membase + SYSTICK_COMPARE);
+
+ return 0;
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0013-owrt-hack-fix-mt7688-cache-issue.patch b/target/linux/ramips/patches-4.3/0013-owrt-hack-fix-mt7688-cache-issue.patch
new file mode 100644
index 0000000000..cb51fe69e6
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0013-owrt-hack-fix-mt7688-cache-issue.patch
@@ -0,0 +1,33 @@
+From 5ede027f6c4a57ed25da872420508b7f1168b36b Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:15:32 +0100
+Subject: [PATCH 13/53] owrt: hack: fix mt7688 cache issue
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/kernel/setup.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
+index 4795151..75bde36 100644
+--- a/arch/mips/kernel/setup.c
++++ b/arch/mips/kernel/setup.c
+@@ -681,7 +681,6 @@ static void __init arch_mem_init(char **cmdline_p)
+ crashk_res.end - crashk_res.start + 1,
+ BOOTMEM_DEFAULT);
+ #endif
+- device_tree_init();
+ sparse_init();
+ plat_swiotlb_setup();
+ paging_init();
+@@ -791,6 +790,7 @@ void __init setup_arch(char **cmdline_p)
+ prefill_possible_map();
+
+ cpu_cache_init();
++ device_tree_init();
+ }
+
+ unsigned long kernelsp[NR_CPUS];
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0066-cevt.patch b/target/linux/ramips/patches-4.3/0014-arch-mips-cleanup-cevt-rt3352.patch
index 9eb6cb612b..d6410505c7 100644
--- a/target/linux/ramips/patches-3.18/0066-cevt.patch
+++ b/target/linux/ramips/patches-4.3/0014-arch-mips-cleanup-cevt-rt3352.patch
@@ -1,8 +1,29 @@
+From e6ed424c36458aff8738fb1fbb0141196678058a Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:17:23 +0100
+Subject: [PATCH 14/53] arch: mips: cleanup cevt-rt3352
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/cevt-rt3352.c | 85 ++++++++++++++++++++++++++--------------
+ 1 file changed, 56 insertions(+), 29 deletions(-)
+
+diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c
+index cecf44f..424635c 100644
--- a/arch/mips/ralink/cevt-rt3352.c
+++ b/arch/mips/ralink/cevt-rt3352.c
-@@ -45,18 +45,33 @@ static void (*systick_freq_scaling)(stru
- static void systick_set_clock_mode(enum clock_event_mode mode,
- struct clock_event_device *evt);
+@@ -52,7 +52,7 @@ static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
+
+ sdev->freq_scale = status;
+
+- pr_info("%s: %s autosleep mode\n", systick.dev.name,
++ pr_info("%s: %s autosleep mode\n", sdev->dev.name,
+ (status) ? ("enable") : ("disable"));
+ if (status)
+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG);
+@@ -60,18 +60,33 @@ static inline void mt7620_freq_scaling(struct systick_device *sdev, int status)
+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG);
+ }
+static inline unsigned int read_count(struct systick_device *sdev)
+{
@@ -39,7 +60,7 @@
}
static void systick_event_handler(struct clock_event_device *dev)
-@@ -66,20 +81,25 @@ static void systick_event_handler(struct
+@@ -81,20 +96,25 @@ static void systick_event_handler(struct clock_event_device *dev)
static irqreturn_t systick_interrupt(int irq, void *dev_id)
{
@@ -47,12 +68,12 @@
+ int ret = 0;
+ struct clock_event_device *cdev;
+ struct systick_device *sdev;
-
-- dev->event_handler(dev);
++
+ if (read_c0_cause() & STATUSF_IP7) {
+ cdev = (struct clock_event_device *) dev_id;
+ sdev = container_of(cdev, struct systick_device, dev);
-+
+
+- dev->event_handler(dev);
+ /* Clear Count/Compare Interrupt */
+ write_compare(sdev, read_compare(sdev));
+ cdev->event_handler(cdev);
@@ -69,28 +90,23 @@
- * cevt-r4k uses 300, make sure systick
- * gets used if available
- */
-- .rating = 310,
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = systick_next_event,
- .set_mode = systick_set_clock_mode,
-@@ -126,13 +146,14 @@ static void systick_set_clock_mode(enum
- systick_freq_scaling(sdev, 1);
- break;
-
-+ case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- if (systick_freq_scaling)
- systick_freq_scaling(sdev, 0);
- if (sdev->irq_requested)
-- free_irq(systick.dev.irq, &systick_irqaction);
-+ remove_irq(systick.dev.irq, &systick_irqaction);
- sdev->irq_requested = 0;
-- iowrite32(0, systick.membase + SYSTICK_CONFIG);
-+ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
- break;
-
- default:
-@@ -142,38 +163,45 @@ static void systick_set_clock_mode(enum
+- .rating = 310,
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = systick_next_event,
+ .set_state_shutdown = systick_shutdown,
+@@ -116,9 +136,9 @@ static int systick_shutdown(struct clock_event_device *evt)
+ sdev = container_of(evt, struct systick_device, dev);
+
+ if (sdev->irq_requested)
+- free_irq(systick.dev.irq, &systick_irqaction);
++ remove_irq(systick.dev.irq, &systick_irqaction);
+ sdev->irq_requested = 0;
+- iowrite32(0, systick.membase + SYSTICK_CONFIG);
++ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG);
+
+ if (systick_freq_scaling)
+ systick_freq_scaling(sdev, 0);
+@@ -145,38 +165,45 @@ static int systick_set_oneshot(struct clock_event_device *evt)
}
static const struct of_device_id systick_match[] = {
@@ -149,3 +165,6 @@
pr_info("%s: running - mult: %d, shift: %d\n",
np->name, systick.dev.mult, systick.dev.shift);
}
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch b/target/linux/ramips/patches-4.3/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch
new file mode 100644
index 0000000000..ea04175482
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0015-arch-mips-do-not-select-illegal-access-driver-by-def.patch
@@ -0,0 +1,30 @@
+From 9e6ce539092a1dd605a20bf73c655a9de58d8641 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:18:05 +0100
+Subject: [PATCH 15/53] arch: mips: do not select illegal access driver by
+ default
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/Kconfig | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
+index 2aa5e42..84cf692 100644
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -13,9 +13,9 @@ config CLKEVT_RT3352
+ select CEVT_SYSTICK_QUIRK
+
+ config RALINK_ILL_ACC
+- bool
++ bool "illegal access irq"
+ depends on SOC_RT305X
+- default y
++ default n
+
+ config IRQ_INTC
+ bool
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0016-arch-mips-ralink-remove-non-PCI-check.patch b/target/linux/ramips/patches-4.3/0016-arch-mips-ralink-remove-non-PCI-check.patch
new file mode 100644
index 0000000000..57cc092ef9
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0016-arch-mips-ralink-remove-non-PCI-check.patch
@@ -0,0 +1,27 @@
+From 3c146f6123a73cb6c7d21269b5ada8ccb272a988 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:18:41 +0100
+Subject: [PATCH 16/53] arch: mips: ralink: remove non-PCI check
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c | 3 ---
+ 1 file changed, 3 deletions(-)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 0ba49a1..794a7c7 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -526,9 +526,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ mt762x_soc = MT762X_SOC_MT7620N;
+ name = "MT7620N";
+ soc_info->compatible = "ralink,mt7620n-soc";
+-#ifdef CONFIG_PCI
+- panic("mt7620n is only supported for non pci kernels");
+-#endif
+ }
+ } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
+ mt762x_soc = MT762X_SOC_MT7628AN;
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0017-arch-mips-ralink-do-not-set-pm_poweroff.patch b/target/linux/ramips/patches-4.3/0017-arch-mips-ralink-do-not-set-pm_poweroff.patch
new file mode 100644
index 0000000000..636edad8c8
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0017-arch-mips-ralink-do-not-set-pm_poweroff.patch
@@ -0,0 +1,25 @@
+From 145fcd145e0adb10531bb2e8c9f919b0606dff4d Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:19:15 +0100
+Subject: [PATCH 17/53] arch: mips: ralink: do not set pm_poweroff
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/reset.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
+index 55c7ec5..ee26d45 100644
+--- a/arch/mips/ralink/reset.c
++++ b/arch/mips/ralink/reset.c
+@@ -98,7 +98,6 @@ static int __init mips_reboot_setup(void)
+ {
+ _machine_restart = ralink_restart;
+ _machine_halt = ralink_halt;
+- pm_power_off = ralink_halt;
+
+ return 0;
+ }
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0070-pci-reset.patch b/target/linux/ramips/patches-4.3/0018-arch-mips-ralink-reset-pci-prior-to-reboot.patch
index 6055731822..dbd3db0106 100644
--- a/target/linux/ramips/patches-3.18/0070-pci-reset.patch
+++ b/target/linux/ramips/patches-4.3/0018-arch-mips-ralink-reset-pci-prior-to-reboot.patch
@@ -1,3 +1,15 @@
+From d3c1e72c755cf67427b5d410039a096520d6537f Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:19:55 +0100
+Subject: [PATCH 18/53] arch: mips: ralink: reset pci prior to reboot
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/reset.c | 12 ++++++++++--
+ 1 file changed, 10 insertions(+), 2 deletions(-)
+
+diff --git a/arch/mips/ralink/reset.c b/arch/mips/ralink/reset.c
+index ee26d45..ee117c4 100644
--- a/arch/mips/ralink/reset.c
+++ b/arch/mips/ralink/reset.c
@@ -11,6 +11,7 @@
@@ -33,3 +45,6 @@
local_irq_disable();
rt_sysc_w32(RSTCTL_RESET_SYSTEM, SYSC_REG_RESET_CTRL);
unreachable();
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0071-mt7621-add-cpu-feature-overrides.patch b/target/linux/ramips/patches-4.3/0019-arch-mips-ralink-add-mt7621-cpu-feature-overrides.patch
index f6f94f0383..9e7e3e30d9 100644
--- a/target/linux/ramips/patches-3.18/0071-mt7621-add-cpu-feature-overrides.patch
+++ b/target/linux/ramips/patches-4.3/0019-arch-mips-ralink-add-mt7621-cpu-feature-overrides.patch
@@ -1,3 +1,17 @@
+From 43372c2be9fcf68bc40c322039c75893ce4e982c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:20:47 +0100
+Subject: [PATCH 19/53] arch: mips: ralink: add mt7621 cpu-feature-overrides
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ .../asm/mach-ralink/mt7621/cpu-feature-overrides.h | 65 ++++++++++++++++++++
+ 1 file changed, 65 insertions(+)
+ create mode 100644 arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
+
+diff --git a/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
+new file mode 100644
+index 0000000..15db1b3
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/mt7621/cpu-feature-overrides.h
@@ -0,0 +1,65 @@
@@ -66,3 +80,6 @@
+#define cpu_has_userlocal 1
+
+#endif /* _MT7621_CPU_FEATURE_OVERRIDES_H */
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0300-mt7628_fixes.patch b/target/linux/ramips/patches-4.3/0020-arch-mips-ralink-mt7628-fixes.patch
index 443e07afed..0b5cb04cfb 100644
--- a/target/linux/ramips/patches-3.18/0300-mt7628_fixes.patch
+++ b/target/linux/ramips/patches-4.3/0020-arch-mips-ralink-mt7628-fixes.patch
@@ -1,11 +1,23 @@
+From 0315355131c46c42164a4b180363bc79728f7015 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:27:15 +0100
+Subject: [PATCH 20/53] arch: mips: ralink: mt7628 fixes
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c | 76 +++++++++++++++++++++++++++++----------------
+ 1 file changed, 50 insertions(+), 26 deletions(-)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 794a7c7..41b4a3e 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
-@@ -101,28 +101,28 @@ static struct rt2880_pmx_group mt7620a_p
+@@ -104,28 +104,28 @@ static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
};
static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
-- FUNC("sdxc", 3, 19, 1),
-+ FUNC("sdxc d6", 3, 19, 1),
+- FUNC("sdcx", 3, 19, 1),
++ FUNC("sdcx d6", 3, 19, 1),
FUNC("utif", 2, 19, 1),
FUNC("gpio", 1, 19, 1),
- FUNC("pwm", 0, 19, 1),
@@ -13,8 +25,8 @@
};
static struct rt2880_pmx_func pwm0_grp_mt7628[] = {
-- FUNC("sdxc", 3, 18, 1),
-+ FUNC("sdxc d7", 3, 18, 1),
+- FUNC("sdcx", 3, 18, 1),
++ FUNC("sdcx d7", 3, 18, 1),
FUNC("utif", 2, 18, 1),
FUNC("gpio", 1, 18, 1),
- FUNC("pwm", 0, 18, 1),
@@ -22,20 +34,20 @@
};
static struct rt2880_pmx_func uart2_grp_mt7628[] = {
-- FUNC("sdxc", 3, 20, 2),
-+ FUNC("sdxc d5 d4", 3, 20, 2),
+- FUNC("sdcx", 3, 20, 2),
++ FUNC("sdcx d5 d4", 3, 20, 2),
FUNC("pwm", 2, 20, 2),
FUNC("gpio", 1, 20, 2),
- FUNC("uart2", 0, 20, 2),
+ FUNC("uart", 0, 20, 2),
};
static struct rt2880_pmx_func uart1_grp_mt7628[] = {
-- FUNC("sdxc", 3, 45, 2),
+- FUNC("sdcx", 3, 45, 2),
+ FUNC("sw_r", 3, 45, 2),
FUNC("pwm", 2, 45, 2),
FUNC("gpio", 1, 45, 2),
- FUNC("uart1", 0, 45, 2),
-@@ -165,7 +165,7 @@ static struct rt2880_pmx_func spi_cs1_gr
+ FUNC("uart", 0, 45, 2),
+@@ -168,7 +168,7 @@ static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = {
FUNC("-", 3, 6, 1),
FUNC("refclk", 2, 6, 1),
FUNC("gpio", 1, 6, 1),
@@ -44,7 +56,7 @@
};
static struct rt2880_pmx_func spis_grp_mt7628[] = {
-@@ -182,27 +182,43 @@ static struct rt2880_pmx_func gpio_grp_m
+@@ -185,28 +185,44 @@ static struct rt2880_pmx_func gpio_grp_mt7628[] = {
FUNC("gpio", 0, 11, 1),
};
@@ -100,23 +112,25 @@
+#define MT7628_GPIO_MODE_GPIO 0
static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
-- GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM1),
-- GRP_G("pmw0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM0),
-+ GRP_G("pwm1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM1),
-+ GRP_G("pwm0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM0),
- GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART2),
- GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART1),
- GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_I2C),
-@@ -216,6 +232,8 @@ static struct rt2880_pmx_group mt7628an_
- GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_CS1),
- GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_SPIS),
- GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_GPIO),
-+ GRP_G("wled_an", wled_an_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_WLED_AN),
-+ GRP_G("wled_kn", wled_kn_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_WLED_KN),
+ GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_PWM1),
+- GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
++ GRP_G("pmw0", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_PWM0),
+ GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_UART2),
+@@ -230,6 +246,10 @@ static struct rt2880_pmx_group mt7628an_pinmux_data[] = {
+ 1, MT7628_GPIO_MODE_SPIS),
+ GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK,
+ 1, MT7628_GPIO_MODE_GPIO),
++ GRP_G("wled_an", wled_an_grp_mt7628, MT7628_GPIO_MODE_MASK,
++ 1, MT7628_GPIO_MODE_WLED_AN),
++ GRP_G("wled_kn", wled_kn_grp_mt7628, MT7628_GPIO_MODE_MASK,
++ 1, MT7628_GPIO_MODE_WLED_KN),
{ 0 }
};
-@@ -529,7 +547,11 @@ void prom_soc_init(struct ralink_soc_inf
+@@ -542,7 +562,11 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
(rev & CHIP_REV_ECO_MASK));
cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
@@ -128,4 +142,7 @@
+ dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
soc_info->mem_base = MT7620_DRAM_BASE;
- if (ralink_soc == MT762X_SOC_MT7628AN)
+ if (mt762x_soc == MT762X_SOC_MT7628AN)
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0021-arch-mips-ralink-add-mt7688-detection.patch b/target/linux/ramips/patches-4.3/0021-arch-mips-ralink-add-mt7688-detection.patch
new file mode 100644
index 0000000000..5aae36088f
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0021-arch-mips-ralink-add-mt7688-detection.patch
@@ -0,0 +1,99 @@
+From 14ef339843c24bf449d0f6d8bc176368c331c2c8 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:29:00 +0100
+Subject: [PATCH 21/53] arch: mips: ralink: add mt7688 detection
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/include/asm/mach-ralink/mt7620.h | 1 +
+ arch/mips/include/asm/mach-ralink/ralink_regs.h | 1 +
+ arch/mips/ralink/mt7620.c | 21 ++++++++++++++++-----
+ 3 files changed, 18 insertions(+), 5 deletions(-)
+
+diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
+index 0ef882b..455d406 100644
+--- a/arch/mips/include/asm/mach-ralink/mt7620.h
++++ b/arch/mips/include/asm/mach-ralink/mt7620.h
+@@ -17,6 +17,7 @@
+
+ #define SYSC_REG_CHIP_NAME0 0x00
+ #define SYSC_REG_CHIP_NAME1 0x04
++#define SYSC_REG_EFUSE_CFG 0x08
+ #define SYSC_REG_CHIP_REV 0x0c
+ #define SYSC_REG_SYSTEM_CONFIG0 0x10
+ #define SYSC_REG_SYSTEM_CONFIG1 0x14
+diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
+index 8fcbd0f..69fbcec 100644
+--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
++++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
+@@ -24,6 +24,7 @@ enum ralink_soc_type {
+ MT762X_SOC_MT7620N,
+ MT762X_SOC_MT7621AT,
+ MT762X_SOC_MT7628AN,
++ MT762X_SOC_MT7688,
+ };
+ extern enum ralink_soc_type ralink_soc;
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 41b4a3e..6975ed8 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -46,6 +46,9 @@ enum mt762x_soc_type mt762x_soc;
+ #define CLKCFG_FFRAC_MASK 0x001f
+ #define CLKCFG_FFRAC_USB_VAL 0x0003
+
++/* EFUSE bits */
++#define EFUSE_MT7688 0x100000
++
+ /* does the board have sdram or ddram */
+ static int dram_type;
+
+@@ -407,7 +410,7 @@ void __init ralink_clk_init(void)
+ #define RINT(x) ((x) / 1000000)
+ #define RFRAC(x) (((x) / 1000) % 1000)
+
+- if (mt762x_soc == MT762X_SOC_MT7628AN) {
++ if (mt762x_soc == MT762X_SOC_MT7628AN || mt762x_soc == MT762X_SOC_MT7688) {
+ if (xtal_rate == MHZ(40))
+ cpu_rate = MHZ(580);
+ else
+@@ -451,7 +454,8 @@ void __init ralink_clk_init(void)
+ ralink_clk_add("10000c00.uartlite", periph_rate);
+ ralink_clk_add("10180000.wmac", xtal_rate);
+
+- if (IS_ENABLED(CONFIG_USB)) {
++ if (IS_ENABLED(CONFIG_USB) &&
++ (mt762x_soc == MT762X_SOC_MT7620A || mt762x_soc == MT762X_SOC_MT7620N)) {
+ /*
+ * When the CPU goes into sleep mode, the BUS clock will be too low for
+ * USB to function properly
+@@ -548,8 +552,15 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ soc_info->compatible = "ralink,mt7620n-soc";
+ }
+ } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) {
+- mt762x_soc = MT762X_SOC_MT7628AN;
+- name = "MT7628AN";
++ u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
++
++ if (efuse & EFUSE_MT7688) {
++ mt762x_soc = MT762X_SOC_MT7688;
++ name = "MT7688";
++ } else {
++ mt762x_soc = MT762X_SOC_MT7628AN;
++ name = "MT7628AN";
++ }
+ soc_info->compatible = "ralink,mt7628an-soc";
+ } else {
+ panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1);
+@@ -582,7 +593,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ pr_info("Digital PMU set to %s control\n",
+ (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
+
+- if (mt762x_soc == MT762X_SOC_MT7628AN)
++ if (mt762x_soc == MT762X_SOC_MT7628AN || mt762x_soc == MT762X_SOC_MT7688)
+ rt2880_pinmux_data = mt7628an_pinmux_data;
+ else
+ rt2880_pinmux_data = mt7620a_pinmux_data;
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0022-arch-mips-ralink-proper-vendor-id-srtring.patch b/target/linux/ramips/patches-4.3/0022-arch-mips-ralink-proper-vendor-id-srtring.patch
new file mode 100644
index 0000000000..97f8de3e42
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0022-arch-mips-ralink-proper-vendor-id-srtring.patch
@@ -0,0 +1,26 @@
+From 2e5d90398aacde3e46dfd87e6f716b00a0ffcd83 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:30:11 +0100
+Subject: [PATCH 22/53] arch: mips: ralink: proper vendor id srtring
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index 6975ed8..da734e2 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -567,7 +567,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ }
+
+ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
+- "Ralink %s ver:%u eco:%u",
++ "MediaTek %s ver:%u eco:%u",
+ name,
+ (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
+ (rev & CHIP_REV_ECO_MASK));
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0023-arch-mips-ralink-unify-soc-id.patch b/target/linux/ramips/patches-4.3/0023-arch-mips-ralink-unify-soc-id.patch
new file mode 100644
index 0000000000..3e5d04a259
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0023-arch-mips-ralink-unify-soc-id.patch
@@ -0,0 +1,90 @@
+From 4ede4fbb485d0a88839df1f02371fc00755db636 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:31:41 +0100
+Subject: [PATCH 23/53] arch: mips: ralink: unify soc id
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/ralink/mt7620.c | 19 ++++++++-----------
+ 1 file changed, 8 insertions(+), 11 deletions(-)
+
+diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
+index da734e2..db99e9c 100644
+--- a/arch/mips/ralink/mt7620.c
++++ b/arch/mips/ralink/mt7620.c
+@@ -37,9 +37,6 @@
+ #define PMU1_CFG 0x8C
+ #define DIG_SW_SEL BIT(25)
+
+-/* is this a MT7620 or a MT7628 */
+-enum mt762x_soc_type mt762x_soc;
+-
+ /* clock scaling */
+ #define CLKCFG_FDIV_MASK 0x1f00
+ #define CLKCFG_FDIV_USB_VAL 0x0300
+@@ -410,7 +407,7 @@ void __init ralink_clk_init(void)
+ #define RINT(x) ((x) / 1000000)
+ #define RFRAC(x) (((x) / 1000) % 1000)
+
+- if (mt762x_soc == MT762X_SOC_MT7628AN || mt762x_soc == MT762X_SOC_MT7688) {
++ if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688) {
+ if (xtal_rate == MHZ(40))
+ cpu_rate = MHZ(580);
+ else
+@@ -455,7 +452,7 @@ void __init ralink_clk_init(void)
+ ralink_clk_add("10180000.wmac", xtal_rate);
+
+ if (IS_ENABLED(CONFIG_USB) &&
+- (mt762x_soc == MT762X_SOC_MT7620A || mt762x_soc == MT762X_SOC_MT7620N)) {
++ (ralink_soc == MT762X_SOC_MT7620A || ralink_soc == MT762X_SOC_MT7620N)) {
+ /*
+ * When the CPU goes into sleep mode, the BUS clock will be too low for
+ * USB to function properly
+@@ -543,11 +540,11 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+
+ if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) {
+ if (bga) {
+- mt762x_soc = MT762X_SOC_MT7620A;
++ ralink_soc = MT762X_SOC_MT7620A;
+ name = "MT7620A";
+ soc_info->compatible = "ralink,mt7620a-soc";
+ } else {
+- mt762x_soc = MT762X_SOC_MT7620N;
++ ralink_soc = MT762X_SOC_MT7620N;
+ name = "MT7620N";
+ soc_info->compatible = "ralink,mt7620n-soc";
+ }
+@@ -555,10 +552,10 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ u32 efuse = __raw_readl(sysc + SYSC_REG_EFUSE_CFG);
+
+ if (efuse & EFUSE_MT7688) {
+- mt762x_soc = MT762X_SOC_MT7688;
++ ralink_soc = MT762X_SOC_MT7688;
+ name = "MT7688";
+ } else {
+- mt762x_soc = MT762X_SOC_MT7628AN;
++ ralink_soc = MT762X_SOC_MT7628AN;
+ name = "MT7628AN";
+ }
+ soc_info->compatible = "ralink,mt7628an-soc";
+@@ -580,7 +577,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
+
+ soc_info->mem_base = MT7620_DRAM_BASE;
+- if (mt762x_soc == MT762X_SOC_MT7628AN)
++ if (ralink_soc == MT762X_SOC_MT7628AN)
+ mt7628_dram_init(soc_info);
+ else
+ mt7620_dram_init(soc_info);
+@@ -593,7 +590,7 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+ pr_info("Digital PMU set to %s control\n",
+ (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
+
+- if (mt762x_soc == MT762X_SOC_MT7628AN || mt762x_soc == MT762X_SOC_MT7688)
++ if (ralink_soc == MT762X_SOC_MT7628AN || ralink_soc == MT762X_SOC_MT7688)
+ rt2880_pinmux_data = mt7628an_pinmux_data;
+ else
+ rt2880_pinmux_data = mt7620a_pinmux_data;
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0030-GPIO-add-named-gpio-exports.patch b/target/linux/ramips/patches-4.3/0024-GPIO-add-named-gpio-exports.patch
index 855da68285..e15aabd669 100644
--- a/target/linux/ramips/patches-3.18/0030-GPIO-add-named-gpio-exports.patch
+++ b/target/linux/ramips/patches-4.3/0024-GPIO-add-named-gpio-exports.patch
@@ -1,28 +1,30 @@
-From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
+From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 30/36] GPIO: add named gpio exports
+Subject: [PATCH 24/53] GPIO: add named gpio exports
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib.c | 11 +++++--
- include/asm-generic/gpio.h | 5 +++
+ drivers/gpio/gpiolib-sysfs.c | 10 +++++-
+ include/asm-generic/gpio.h | 6 ++++
include/linux/gpio/consumer.h | 8 +++++
- 4 files changed, 90 insertions(+), 2 deletions(-)
+ 4 files changed, 91 insertions(+), 1 deletion(-)
+diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
+index fa6e3c8..c3f34c0 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
-@@ -22,6 +22,8 @@
- #include <linux/of_gpio.h>
+@@ -23,6 +23,8 @@
#include <linux/pinctrl/pinctrl.h>
#include <linux/slab.h>
+ #include <linux/gpio/machine.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
#include "gpiolib.h"
-@@ -316,3 +318,69 @@ void of_gpiochip_remove(struct gpio_chip
+@@ -450,3 +452,69 @@ void of_gpiochip_remove(struct gpio_chip *chip)
gpiochip_remove_pin_ranges(chip);
of_node_put(chip->of_node);
}
@@ -92,9 +94,46 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
+}
+device_initcall(of_gpio_export_init);
+diff --git a/drivers/gpio/gpiolib-sysfs.c b/drivers/gpio/gpiolib-sysfs.c
+index b57ed8e..0df781d 100644
+--- a/drivers/gpio/gpiolib-sysfs.c
++++ b/drivers/gpio/gpiolib-sysfs.c
+@@ -544,7 +544,7 @@ static struct class gpio_class = {
+ *
+ * Returns zero on success, else an error.
+ */
+-int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
+ {
+ struct gpio_chip *chip;
+ struct gpiod_data *data;
+@@ -604,6 +604,8 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+ offset = gpio_chip_hwgpio(desc);
+ if (chip->names && chip->names[offset])
+ ioname = chip->names[offset];
++ if (name)
++ ioname = name;
+
+ dev = device_create_with_groups(&gpio_class, chip->dev,
+ MKDEV(0, 0), data, gpio_groups,
+@@ -625,6 +627,12 @@ err_unlock:
+ gpiod_dbg(desc, "%s: status %d\n", __func__, status);
+ return status;
+ }
++EXPORT_SYMBOL_GPL(__gpiod_export);
++
++int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
++{
++ return __gpiod_export(desc, direction_may_change, NULL);
++}
+ EXPORT_SYMBOL_GPL(gpiod_export);
+
+ static int match_export(struct device *dev, const void *desc)
+diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
+index 40ec143..dcb07ab 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
-@@ -123,6 +123,12 @@ static inline int gpio_export(unsigned g
+@@ -122,6 +122,12 @@ static inline int gpio_export(unsigned gpio, bool direction_may_change)
return gpiod_export(gpio_to_desc(gpio), direction_may_change);
}
@@ -107,9 +146,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
static inline int gpio_export_link(struct device *dev, const char *name,
unsigned gpio)
{
+diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
+index 14cac67..8097374 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
-@@ -323,6 +323,7 @@ static inline int desc_to_gpio(const str
+@@ -426,6 +426,7 @@ static inline struct gpio_desc *devm_get_gpiod_from_child(
#if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
@@ -117,7 +158,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc);
-@@ -331,6 +332,13 @@ void gpiod_unexport(struct gpio_desc *de
+@@ -433,6 +434,13 @@ void gpiod_unexport(struct gpio_desc *desc);
#else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
@@ -131,36 +172,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
static inline int gpiod_export(struct gpio_desc *desc,
bool direction_may_change)
{
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -517,7 +517,7 @@ static struct class gpio_class = {
- *
- * Returns zero on success, else an error.
- */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- struct gpio_chip *chip;
- unsigned long flags;
-@@ -566,6 +566,8 @@ int gpiod_export(struct gpio_desc *desc,
- offset = gpio_chip_hwgpio(desc);
- if (desc->chip->names && desc->chip->names[offset])
- ioname = desc->chip->names[offset];
-+ if (name)
-+ ioname = name;
-
- dev = device_create_with_groups(&gpio_class, desc->chip->dev,
- MKDEV(0, 0), desc, gpio_groups,
-@@ -602,6 +604,12 @@ fail_unlock:
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+ return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
-
- static int match_export(struct device *dev, const void *data)
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0025-pinctrl-ralink-add-pinctrl-driver.patch b/target/linux/ramips/patches-4.3/0025-pinctrl-ralink-add-pinctrl-driver.patch
new file mode 100644
index 0000000000..76a2ea13f4
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0025-pinctrl-ralink-add-pinctrl-driver.patch
@@ -0,0 +1,538 @@
+From 7adbe9a88c33c6e362a10b109d963b5500a21f00 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:34:05 +0100
+Subject: [PATCH 25/53] pinctrl: ralink: add pinctrl driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ arch/mips/Kconfig | 2 +
+ drivers/pinctrl/Kconfig | 5 +
+ drivers/pinctrl/Makefile | 1 +
+ drivers/pinctrl/pinctrl-rt2880.c | 474 ++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 482 insertions(+)
+ create mode 100644 drivers/pinctrl/pinctrl-rt2880.c
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index e3aa5b0..0098bff 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -557,6 +557,8 @@ config RALINK
+ select CLKDEV_LOOKUP
+ select ARCH_HAS_RESET_CONTROLLER
+ select RESET_CONTROLLER
++ select PINCTRL
++ select PINCTRL_RT2880
+
+ config SGI_IP22
+ bool "SGI IP22 (Indy/Indigo2)"
+diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
+index 84dd2ed..d016935 100644
+--- a/drivers/pinctrl/Kconfig
++++ b/drivers/pinctrl/Kconfig
+@@ -103,6 +103,11 @@ config PINCTRL_LPC18XX
+ help
+ Pinctrl driver for NXP LPC18xx/43xx System Control Unit (SCU).
+
++config PINCTRL_RT2880
++ bool
++ depends on RALINK
++ select PINMUX
++
+ config PINCTRL_FALCON
+ bool
+ depends on SOC_FALCON
+diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
+index cad077c..0c86632 100644
+--- a/drivers/pinctrl/Makefile
++++ b/drivers/pinctrl/Makefile
+@@ -19,6 +19,7 @@ obj-$(CONFIG_PINCTRL_MESON) += meson/
+ obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
+ obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o
+ obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
++obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o
+ obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
+ obj-$(CONFIG_PINCTRL_SIRF) += sirf/
+ obj-$(CONFIG_PINCTRL_TEGRA) += pinctrl-tegra.o
+diff --git a/drivers/pinctrl/pinctrl-rt2880.c b/drivers/pinctrl/pinctrl-rt2880.c
+new file mode 100644
+index 0000000..fe0af77
+--- /dev/null
++++ b/drivers/pinctrl/pinctrl-rt2880.c
+@@ -0,0 +1,474 @@
++/*
++ * linux/drivers/pinctrl/pinctrl-rt2880.c
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * publishhed by the Free Software Foundation.
++ *
++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
++ */
++
++#include <linux/module.h>
++#include <linux/device.h>
++#include <linux/io.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/of.h>
++#include <linux/pinctrl/pinctrl.h>
++#include <linux/pinctrl/pinconf.h>
++#include <linux/pinctrl/pinmux.h>
++#include <linux/pinctrl/consumer.h>
++#include <linux/pinctrl/machine.h>
++
++#include <asm/mach-ralink/ralink_regs.h>
++#include <asm/mach-ralink/pinmux.h>
++#include <asm/mach-ralink/mt7620.h>
++
++#include "core.h"
++
++#define SYSC_REG_GPIO_MODE 0x60
++#define SYSC_REG_GPIO_MODE2 0x64
++
++struct rt2880_priv {
++ struct device *dev;
++
++ struct pinctrl_pin_desc *pads;
++ struct pinctrl_desc *desc;
++
++ struct rt2880_pmx_func **func;
++ int func_count;
++
++ struct rt2880_pmx_group *groups;
++ const char **group_names;
++ int group_count;
++
++ uint8_t *gpio;
++ int max_pins;
++};
++
++struct rt2880_pmx_group *rt2880_pinmux_data = NULL;
++
++static int rt2880_get_group_count(struct pinctrl_dev *pctrldev)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ return p->group_count;
++}
++
++static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev,
++ unsigned group)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ if (group >= p->group_count)
++ return NULL;
++
++ return p->group_names[group];
++}
++
++static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev,
++ unsigned group,
++ const unsigned **pins,
++ unsigned *num_pins)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ if (group >= p->group_count)
++ return -EINVAL;
++
++ *pins = p->groups[group].func[0].pins;
++ *num_pins = p->groups[group].func[0].pin_count;
++
++ return 0;
++}
++
++static void rt2880_pinctrl_dt_free_map(struct pinctrl_dev *pctrldev,
++ struct pinctrl_map *map, unsigned num_maps)
++{
++ int i;
++
++ for (i = 0; i < num_maps; i++)
++ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN ||
++ map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP)
++ kfree(map[i].data.configs.configs);
++ kfree(map);
++}
++
++static void rt2880_pinctrl_pin_dbg_show(struct pinctrl_dev *pctrldev,
++ struct seq_file *s,
++ unsigned offset)
++{
++ seq_printf(s, "ralink pio");
++}
++
++static void rt2880_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctrldev,
++ struct device_node *np,
++ struct pinctrl_map **map)
++{
++ const char *function;
++ int func = of_property_read_string(np, "ralink,function", &function);
++ int grps = of_property_count_strings(np, "ralink,group");
++ int i;
++
++ if (func || !grps)
++ return;
++
++ for (i = 0; i < grps; i++) {
++ const char *group;
++
++ of_property_read_string_index(np, "ralink,group", i, &group);
++
++ (*map)->type = PIN_MAP_TYPE_MUX_GROUP;
++ (*map)->name = function;
++ (*map)->data.mux.group = group;
++ (*map)->data.mux.function = function;
++ (*map)++;
++ }
++}
++
++static int rt2880_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrldev,
++ struct device_node *np_config,
++ struct pinctrl_map **map,
++ unsigned *num_maps)
++{
++ int max_maps = 0;
++ struct pinctrl_map *tmp;
++ struct device_node *np;
++
++ for_each_child_of_node(np_config, np) {
++ int ret = of_property_count_strings(np, "ralink,group");
++
++ if (ret >= 0)
++ max_maps += ret;
++ }
++
++ if (!max_maps)
++ return max_maps;
++
++ *map = kzalloc(max_maps * sizeof(struct pinctrl_map), GFP_KERNEL);
++ if (!*map)
++ return -ENOMEM;
++
++ tmp = *map;
++
++ for_each_child_of_node(np_config, np)
++ rt2880_pinctrl_dt_subnode_to_map(pctrldev, np, &tmp);
++ *num_maps = max_maps;
++
++ return 0;
++}
++
++static const struct pinctrl_ops rt2880_pctrl_ops = {
++ .get_groups_count = rt2880_get_group_count,
++ .get_group_name = rt2880_get_group_name,
++ .get_group_pins = rt2880_get_group_pins,
++ .pin_dbg_show = rt2880_pinctrl_pin_dbg_show,
++ .dt_node_to_map = rt2880_pinctrl_dt_node_to_map,
++ .dt_free_map = rt2880_pinctrl_dt_free_map,
++};
++
++static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ return p->func_count;
++}
++
++static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev,
++ unsigned func)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ return p->func[func]->name;
++}
++
++static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev,
++ unsigned func,
++ const char * const **groups,
++ unsigned * const num_groups)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ if (p->func[func]->group_count == 1)
++ *groups = &p->group_names[p->func[func]->groups[0]];
++ else
++ *groups = p->group_names;
++
++ *num_groups = p->func[func]->group_count;
++
++ return 0;
++}
++
++static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev,
++ unsigned func,
++ unsigned group)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++ u32 mode = 0;
++ u32 reg = SYSC_REG_GPIO_MODE;
++ int i;
++ int shift;
++
++ /* dont allow double use */
++ if (p->groups[group].enabled) {
++ dev_err(p->dev, "%s is already enabled\n", p->groups[group].name);
++ return -EBUSY;
++ }
++
++ p->groups[group].enabled = 1;
++ p->func[func]->enabled = 1;
++
++ shift = p->groups[group].shift;
++ if (shift >= 32) {
++ shift -= 32;
++ reg = SYSC_REG_GPIO_MODE2;
++ }
++ mode = rt_sysc_r32(reg);
++ mode &= ~(p->groups[group].mask << shift);
++
++ /* mark the pins as gpio */
++ for (i = 0; i < p->groups[group].func[0].pin_count; i++)
++ p->gpio[p->groups[group].func[0].pins[i]] = 1;
++
++ /* function 0 is gpio and needs special handling */
++ if (func == 0) {
++ mode |= p->groups[group].gpio << shift;
++ } else {
++ for (i = 0; i < p->func[func]->pin_count; i++)
++ p->gpio[p->func[func]->pins[i]] = 0;
++ mode |= p->func[func]->value << shift;
++ }
++ rt_sysc_w32(mode, reg);
++
++ return 0;
++}
++
++static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev,
++ struct pinctrl_gpio_range *range,
++ unsigned pin)
++{
++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev);
++
++ if (!p->gpio[pin]) {
++ dev_err(p->dev, "pin %d is not set to gpio mux\n", pin);
++ return -EINVAL;
++ }
++
++ return 0;
++}
++
++static const struct pinmux_ops rt2880_pmx_group_ops = {
++ .get_functions_count = rt2880_pmx_func_count,
++ .get_function_name = rt2880_pmx_func_name,
++ .get_function_groups = rt2880_pmx_group_get_groups,
++ .set_mux = rt2880_pmx_group_enable,
++ .gpio_request_enable = rt2880_pmx_group_gpio_request_enable,
++};
++
++static struct pinctrl_desc rt2880_pctrl_desc = {
++ .owner = THIS_MODULE,
++ .name = "rt2880-pinmux",
++ .pctlops = &rt2880_pctrl_ops,
++ .pmxops = &rt2880_pmx_group_ops,
++};
++
++static struct rt2880_pmx_func gpio_func = {
++ .name = "gpio",
++};
++
++static int rt2880_pinmux_index(struct rt2880_priv *p)
++{
++ struct rt2880_pmx_func **f;
++ struct rt2880_pmx_group *mux = p->groups;
++ int i, j, c = 0;
++
++ /* count the mux functions */
++ while (mux->name) {
++ p->group_count++;
++ mux++;
++ }
++
++ /* allocate the group names array needed by the gpio function */
++ p->group_names = devm_kzalloc(p->dev, sizeof(char *) * p->group_count, GFP_KERNEL);
++ if (!p->group_names)
++ return -1;
++
++ for (i = 0; i < p->group_count; i++) {
++ p->group_names[i] = p->groups[i].name;
++ p->func_count += p->groups[i].func_count;
++ }
++
++ /* we have a dummy function[0] for gpio */
++ p->func_count++;
++
++ /* allocate our function and group mapping index buffers */
++ f = p->func = devm_kzalloc(p->dev, sizeof(struct rt2880_pmx_func) * p->func_count, GFP_KERNEL);
++ gpio_func.groups = devm_kzalloc(p->dev, sizeof(int) * p->group_count, GFP_KERNEL);
++ if (!f || !gpio_func.groups)
++ return -1;
++
++ /* add a backpointer to the function so it knows its group */
++ gpio_func.group_count = p->group_count;
++ for (i = 0; i < gpio_func.group_count; i++)
++ gpio_func.groups[i] = i;
++
++ f[c] = &gpio_func;
++ c++;
++
++ /* add remaining functions */
++ for (i = 0; i < p->group_count; i++) {
++ for (j = 0; j < p->groups[i].func_count; j++) {
++ f[c] = &p->groups[i].func[j];
++ f[c]->groups = devm_kzalloc(p->dev, sizeof(int), GFP_KERNEL);
++ f[c]->groups[0] = i;
++ f[c]->group_count = 1;
++ c++;
++ }
++ }
++ return 0;
++}
++
++static int rt2880_pinmux_pins(struct rt2880_priv *p)
++{
++ int i, j;
++
++ /* loop over the functions and initialize the pins array. also work out the highest pin used */
++ for (i = 0; i < p->func_count; i++) {
++ int pin;
++
++ if (!p->func[i]->pin_count)
++ continue;
++
++ p->func[i]->pins = devm_kzalloc(p->dev, sizeof(int) * p->func[i]->pin_count, GFP_KERNEL);
++ for (j = 0; j < p->func[i]->pin_count; j++)
++ p->func[i]->pins[j] = p->func[i]->pin_first + j;
++
++ pin = p->func[i]->pin_first + p->func[i]->pin_count;
++ if (pin > p->max_pins)
++ p->max_pins = pin;
++ }
++
++ /* the buffer that tells us which pins are gpio */
++ p->gpio = devm_kzalloc(p->dev,sizeof(uint8_t) * p->max_pins,
++ GFP_KERNEL);
++ /* the pads needed to tell pinctrl about our pins */
++ p->pads = devm_kzalloc(p->dev,
++ sizeof(struct pinctrl_pin_desc) * p->max_pins,
++ GFP_KERNEL);
++ if (!p->pads || !p->gpio ) {
++ dev_err(p->dev, "Failed to allocate gpio data\n");
++ return -ENOMEM;
++ }
++
++ memset(p->gpio, 1, sizeof(uint8_t) * p->max_pins);
++ for (i = 0; i < p->func_count; i++) {
++ if (!p->func[i]->pin_count)
++ continue;
++
++ for (j = 0; j < p->func[i]->pin_count; j++)
++ p->gpio[p->func[i]->pins[j]] = 0;
++ }
++
++ /* pin 0 is always a gpio */
++ p->gpio[0] = 1;
++
++ /* set the pads */
++ for (i = 0; i < p->max_pins; i++) {
++ /* strlen("ioXY") + 1 = 5 */
++ char *name = devm_kzalloc(p->dev, 5, GFP_KERNEL);
++
++ if (!name) {
++ dev_err(p->dev, "Failed to allocate pad name\n");
++ return -ENOMEM;
++ }
++ snprintf(name, 5, "io%d", i);
++ p->pads[i].number = i;
++ p->pads[i].name = name;
++ }
++ p->desc->pins = p->pads;
++ p->desc->npins = p->max_pins;
++
++ return 0;
++}
++
++static int rt2880_pinmux_probe(struct platform_device *pdev)
++{
++ struct rt2880_priv *p;
++ struct pinctrl_dev *dev;
++ struct device_node *np;
++
++ if (!rt2880_pinmux_data)
++ return -ENOSYS;
++
++ /* setup the private data */
++ p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL);
++ if (!p)
++ return -ENOMEM;
++
++ p->dev = &pdev->dev;
++ p->desc = &rt2880_pctrl_desc;
++ p->groups = rt2880_pinmux_data;
++ platform_set_drvdata(pdev, p);
++
++ /* init the device */
++ if (rt2880_pinmux_index(p)) {
++ dev_err(&pdev->dev, "failed to load index\n");
++ return -EINVAL;
++ }
++ if (rt2880_pinmux_pins(p)) {
++ dev_err(&pdev->dev, "failed to load pins\n");
++ return -EINVAL;
++ }
++ dev = pinctrl_register(p->desc, &pdev->dev, p);
++ if (IS_ERR(dev))
++ return PTR_ERR(dev);
++
++ /* finalize by adding gpio ranges for enables gpio controllers */
++ for_each_compatible_node(np, NULL, "ralink,rt2880-gpio") {
++ const __be32 *ngpio, *gpiobase;
++ struct pinctrl_gpio_range *range;
++ char *name;
++
++ if (!of_device_is_available(np))
++ continue;
++
++ ngpio = of_get_property(np, "ralink,num-gpios", NULL);
++ gpiobase = of_get_property(np, "ralink,gpio-base", NULL);
++ if (!ngpio || !gpiobase) {
++ dev_err(&pdev->dev, "failed to load chip info\n");
++ return -EINVAL;
++ }
++
++ range = devm_kzalloc(p->dev, sizeof(struct pinctrl_gpio_range) + 4, GFP_KERNEL);
++ range->name = name = (char *) &range[1];
++ sprintf(name, "pio");
++ range->npins = __be32_to_cpu(*ngpio);
++ range->base = __be32_to_cpu(*gpiobase);
++ range->pin_base = range->base;
++ pinctrl_add_gpio_range(dev, range);
++ }
++
++ return 0;
++}
++
++static const struct of_device_id rt2880_pinmux_match[] = {
++ { .compatible = "ralink,rt2880-pinmux" },
++ {},
++};
++MODULE_DEVICE_TABLE(of, rt2880_pinmux_match);
++
++static struct platform_driver rt2880_pinmux_driver = {
++ .probe = rt2880_pinmux_probe,
++ .driver = {
++ .name = "rt2880-pinmux",
++ .owner = THIS_MODULE,
++ .of_match_table = rt2880_pinmux_match,
++ },
++};
++
++int __init rt2880_pinmux_init(void)
++{
++ return platform_driver_register(&rt2880_pinmux_driver);
++}
++
++core_initcall_sync(rt2880_pinmux_init);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0046-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-4.3/0026-DT-Add-documentation-for-gpio-ralink.patch
index 4c869eb858..f6b60e90af 100644
--- a/target/linux/ramips/patches-3.18/0046-DT-Add-documentation-for-gpio-ralink.patch
+++ b/target/linux/ramips/patches-4.3/0026-DT-Add-documentation-for-gpio-ralink.patch
@@ -1,7 +1,7 @@
-From 6827bd971fc4f323fc91e4506771a13b827c49a3 Mon Sep 17 00:00:00 2001
+From d410e5478c622c01fcf31427533df5f433df9146 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 28 Jul 2013 19:45:30 +0200
-Subject: [PATCH 46/57] DT: Add documentation for gpio-ralink
+Subject: [PATCH 26/53] DT: Add documentation for gpio-ralink
Describe gpio-ralink binding.
@@ -14,6 +14,9 @@ Cc: linux-gpio@vger.kernel.org
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
+diff --git a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
+new file mode 100644
+index 0000000..b4acf02
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
@@ -0,0 +1,40 @@
@@ -57,3 +60,6 @@ Cc: linux-gpio@vger.kernel.org
+ 30 34 ];
+
+ };
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0047-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-4.3/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
index a742e0b10d..cc09987eec 100644
--- a/target/linux/ramips/patches-3.18/0047-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
+++ b/target/linux/ramips/patches-4.3/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
@@ -1,7 +1,7 @@
-From 4b23ed96930650076caa524ffdde898cb937bdaa Mon Sep 17 00:00:00 2001
+From 69fdd2c4f937796b934e89c33acde9d082e27bfd Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 4 Aug 2014 20:36:29 +0200
-Subject: [PATCH 47/57] GPIO: MIPS: ralink: add gpio driver for ralink SoC
+Subject: [PATCH 27/53] GPIO: MIPS: ralink: add gpio driver for ralink SoC
Add gpio driver for Ralink SoC. This driver makes the gpio core on
RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work.
@@ -10,14 +10,17 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: linux-gpio@vger.kernel.org
---
- arch/mips/include/asm/mach-ralink/gpio.h | 24 +++
+ arch/mips/include/asm/mach-ralink/gpio.h | 24 ++
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-ralink.c | 345 ++++++++++++++++++++++++++++++
- 4 files changed, 376 insertions(+)
+ drivers/gpio/gpio-ralink.c | 355 ++++++++++++++++++++++++++++++
+ 4 files changed, 386 insertions(+)
create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
create mode 100644 drivers/gpio/gpio-ralink.c
+diff --git a/arch/mips/include/asm/mach-ralink/gpio.h b/arch/mips/include/asm/mach-ralink/gpio.h
+new file mode 100644
+index 0000000..f68ee16
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/gpio.h
@@ -0,0 +1,24 @@
@@ -45,9 +48,11 @@ Cc: linux-gpio@vger.kernel.org
+#define gpio_to_irq __gpio_to_irq
+
+#endif /* __ASM_MACH_RALINK_GPIO_H */
+diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
+index 8949b3f..4a3e7df 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
-@@ -288,6 +288,12 @@ config GPIO_SCH311X
+@@ -404,6 +404,12 @@ config GPIO_SCH311X
To compile this driver as a module, choose M here: the module will
be called gpio-sch311x.
@@ -60,9 +65,11 @@ Cc: linux-gpio@vger.kernel.org
config GPIO_SPEAR_SPICS
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
depends on PLAT_SPEAR
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index f79a7c4..13448d78 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -67,6 +67,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf85
+@@ -75,6 +75,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
@@ -70,6 +77,9 @@ Cc: linux-gpio@vger.kernel.org
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
+diff --git a/drivers/gpio/gpio-ralink.c b/drivers/gpio/gpio-ralink.c
+new file mode 100644
+index 0000000..2be9b8a
--- /dev/null
+++ b/drivers/gpio/gpio-ralink.c
@@ -0,0 +1,355 @@
@@ -428,3 +438,6 @@ Cc: linux-gpio@vger.kernel.org
+}
+
+subsys_initcall(ralink_gpio_init);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0048-GPIO-ralink-add-mt7621-gpio-controller.patch b/target/linux/ramips/patches-4.3/0028-GPIO-ralink-add-mt7621-gpio-controller.patch
index 429af73b39..9e16aa3c4d 100644
--- a/target/linux/ramips/patches-3.18/0048-GPIO-ralink-add-mt7621-gpio-controller.patch
+++ b/target/linux/ramips/patches-4.3/0028-GPIO-ralink-add-mt7621-gpio-controller.patch
@@ -1,20 +1,22 @@
-From 8481cdf6f96dc16cbcc129d046c021d17a891274 Mon Sep 17 00:00:00 2001
+From 61ac7d9b4228de8c332900902c2b93189b042eab Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 11:00:32 +0100
-Subject: [PATCH 48/57] GPIO: ralink: add mt7621 gpio controller
+Subject: [PATCH 28/53] GPIO: ralink: add mt7621 gpio controller
Signed-off-by: John Crispin <blogic@openwrt.org>
---
arch/mips/Kconfig | 3 +
- drivers/gpio/Kconfig | 6 ++
+ drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
- drivers/gpio/gpio-mt7621.c | 177 ++++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 187 insertions(+)
+ drivers/gpio/gpio-mt7621.c | 354 ++++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 364 insertions(+)
create mode 100644 drivers/gpio/gpio-mt7621.c
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index 0098bff..94ea345 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
-@@ -455,6 +455,9 @@ config RALINK
+@@ -559,6 +559,9 @@ config RALINK
select RESET_CONTROLLER
select PINCTRL
select PINCTRL_RT2880
@@ -24,11 +26,13 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
+diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
+index 4a3e7df..13f860c 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
-@@ -898,6 +898,12 @@ config GPIO_BCM_KONA
+@@ -269,6 +269,12 @@ config GPIO_MB86S7X
help
- Turn on GPIO support for Broadcom "Kona" chips.
+ Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs.
+config GPIO_MT7621
+ bool "Mediatek GPIO Support"
@@ -36,17 +40,21 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ help
+ Say yes here to support the Mediatek SoC GPIO device
+
- comment "USB GPIO expanders:"
-
- config GPIO_VIPERBOARD
+ config GPIO_MM_LANTIQ
+ bool "Lantiq Memory mapped GPIOs"
+ depends on LANTIQ && SOC_XWAY
+diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
+index 13448d78..5563d6e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -107,3 +107,5 @@ obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx
- obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
+@@ -119,3 +119,4 @@ obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o
+ obj-$(CONFIG_GPIO_ZX) += gpio-zx.o
+obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o
-+
+diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c
+new file mode 100644
+index 0000000..7a98b94
--- /dev/null
+++ b/drivers/gpio/gpio-mt7621.c
@@ -0,0 +1,354 @@
@@ -404,3 +412,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+}
+
+subsys_initcall(mediatek_gpio_init);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
index 2448d0ab31..6bc9d1f7ea 100644
--- a/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch
+++ b/target/linux/ramips/patches-4.3/0029-phy-usb-add-ralink-phy.patch
@@ -1,6 +1,21 @@
+From a10fc0cb650be725157eca50e2ceb34efc281ac2 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 22 Apr 2013 23:20:03 +0200
+Subject: [PATCH 29/53] phy: usb: add ralink phy
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/phy/Kconfig | 5 ++
+ drivers/phy/Makefile | 1 +
+ drivers/phy/phy-ralink-usb.c | 175 ++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 181 insertions(+)
+ create mode 100644 drivers/phy/phy-ralink-usb.c
+
+diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
+index 47da573..96ef184 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
-@@ -239,6 +239,11 @@ config PHY_XGENE
+@@ -331,6 +331,11 @@ config PHY_XGENE
help
This option enables support for APM X-Gene SoC multi-purpose PHY.
@@ -12,13 +27,18 @@
config PHY_STIH407_USB
tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family"
depends on RESET_CONTROLLER
+diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
+index a5b18c1..8dbf6cc 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
-@@ -31,3 +31,4 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) +=
- obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
- obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o
- obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o
+@@ -46,3 +46,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o
+ obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
+ obj-$(CONFIG_PHY_BRCMSTB_SATA) += phy-brcmstb-sata.o
+ obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
+obj-$(CONFIG_PHY_RALINK_USB) += phy-ralink-usb.o
+diff --git a/drivers/phy/phy-ralink-usb.c b/drivers/phy/phy-ralink-usb.c
+new file mode 100644
+index 0000000..6c74954
--- /dev/null
+++ b/drivers/phy/phy-ralink-usb.c
@@ -0,0 +1,175 @@
@@ -174,7 +194,7 @@
+ rsthost = devm_reset_control_get(&pdev->dev, "host");
+ rstdev = devm_reset_control_get(&pdev->dev, "device");
+
-+ rt_phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops, NULL);
++ rt_phy = devm_phy_create(dev, NULL, &ralink_usb_phy_ops);
+ if (IS_ERR(rt_phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(rt_phy);
@@ -197,3 +217,6 @@
+MODULE_DESCRIPTION("Ralink USB phy driver");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_LICENSE("GPL v2");
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0030-USB-add-OHCI-EHCI-OF-binding.patch b/target/linux/ramips/patches-4.3/0030-USB-add-OHCI-EHCI-OF-binding.patch
new file mode 100644
index 0000000000..b57fe9c545
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0030-USB-add-OHCI-EHCI-OF-binding.patch
@@ -0,0 +1,40 @@
+From ef42c519247f677229bcbd1ab622222b165242af Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:49:07 +0100
+Subject: [PATCH 30/53] USB: add OHCI/EHCI OF binding
+
+based on f3bc64d6d1f21c1b92d75f233a37b75d77af6963
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/usb/host/ehci-platform.c | 1 +
+ drivers/usb/host/ohci-platform.c | 1 +
+ 2 files changed, 2 insertions(+)
+
+diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
+index 5c3c085..fe78568 100644
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
+@@ -379,6 +379,7 @@ static int ehci_platform_resume(struct device *dev)
+ static const struct of_device_id vt8500_ehci_ids[] = {
+ { .compatible = "via,vt8500-ehci", },
+ { .compatible = "wm,prizm-ehci", },
++ { .compatible = "ralink,rt3xxx-ehci", },
+ { .compatible = "generic-ehci", },
+ { .compatible = "cavium,octeon-6335-ehci", },
+ {}
+diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
+index c2669f18..5cf794a 100644
+--- a/drivers/usb/host/ohci-platform.c
++++ b/drivers/usb/host/ohci-platform.c
+@@ -344,6 +344,7 @@ static int ohci_platform_resume(struct device *dev)
+ #endif /* CONFIG_PM_SLEEP */
+
+ static const struct of_device_id ohci_platform_ids[] = {
++ { .compatible = "ralink,rt3xxx-ohci", },
+ { .compatible = "generic-ohci", },
+ { .compatible = "cavium,octeon-6335-ohci", },
+ { }
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0057-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-4.3/0031-uvc-add-iPassion-iP2970-support.patch
index 0828cc51b1..ae004446bd 100644
--- a/target/linux/ramips/patches-3.18/0057-uvc-add-iPassion-iP2970-support.patch
+++ b/target/linux/ramips/patches-4.3/0031-uvc-add-iPassion-iP2970-support.patch
@@ -1,24 +1,25 @@
-From 0d3e92b4d3e2160873b610aabd46bbc4853ff82e Mon Sep 17 00:00:00 2001
+From 975e76214cd2516eb6cfff4c3eec581872645e88 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 19 Sep 2013 01:50:59 +0200
-Subject: [PATCH 57/57] uvc: add iPassion iP2970 support
+Subject: [PATCH 31/53] uvc: add iPassion iP2970 support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
- drivers/media/usb/uvc/uvc_driver.c | 14 ++++
+ drivers/media/usb/uvc/uvc_driver.c | 12 +++
drivers/media/usb/uvc/uvc_status.c | 2 +
drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++
- drivers/media/usb/uvc/uvcvideo.h | 3 +
- 4 files changed, 166 insertions(+)
+ drivers/media/usb/uvc/uvcvideo.h | 5 +-
+ 4 files changed, 165 insertions(+), 1 deletion(-)
+diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
+index 4b5b3e8..6808bcc 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
-@@ -2504,6 +2504,20 @@ static struct usb_device_id uvc_ids[] =
+@@ -2536,6 +2536,18 @@ static struct usb_device_id uvc_ids[] = {
+ .bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
- .driver_info = UVC_QUIRK_PROBE_MINMAX
- | UVC_QUIRK_IGNORE_SELECTOR_UNIT },
-+
-+/* iPassion iP2970 */
+ .driver_info = UVC_QUIRK_FORCE_Y8 },
++ /* iPassion iP2970 */
+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x1B3B,
@@ -30,13 +31,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ | UVC_QUIRK_STREAM_NO_FID
+ | UVC_QUIRK_MOTION
+ | UVC_QUIRK_SINGLE_ISO },
-+
/* Generic USB Video Class */
{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },
{}
+diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c
+index f552ab9..7132ad4 100644
--- a/drivers/media/usb/uvc/uvc_status.c
+++ b/drivers/media/usb/uvc/uvc_status.c
-@@ -139,6 +139,7 @@ static void uvc_status_complete(struct u
+@@ -139,6 +139,7 @@ static void uvc_status_complete(struct urb *urb)
switch (dev->status[0] & 0x0f) {
case UVC_STATUS_TYPE_CONTROL:
uvc_event_control(dev, dev->status, len);
@@ -44,7 +46,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
break;
case UVC_STATUS_TYPE_STREAMING:
-@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *d
+@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *dev)
}
pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
@@ -52,6 +54,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
/* For high-speed interrupt endpoints, the bInterval value is used as
* an exponent of two. Some developers forgot about it.
+diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
+index f839654..b30aab6 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -21,6 +21,11 @@
@@ -66,7 +70,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
#include <media/v4l2-common.h>
-@@ -1080,9 +1085,149 @@ static void uvc_video_decode_data(struct
+@@ -1089,9 +1094,149 @@ static void uvc_video_decode_data(struct uvc_streaming *stream,
}
}
@@ -216,7 +220,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
/* Mark the buffer as done if the EOF marker is set. */
if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
-@@ -1495,6 +1640,8 @@ static int uvc_init_video_isoc(struct uv
+@@ -1504,6 +1649,8 @@ static int uvc_init_video_isoc(struct uvc_streaming *stream,
if (npackets == 0)
return -ENOMEM;
@@ -225,18 +229,22 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
size = npackets * psize;
for (i = 0; i < UVC_URBS; ++i) {
+diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
+index 816dd1a..d0aa324 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
-@@ -148,6 +148,8 @@
- #define UVC_QUIRK_PROBE_DEF 0x00000100
+@@ -152,7 +152,9 @@
#define UVC_QUIRK_RESTRICT_FRAME_RATE 0x00000200
#define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400
-+#define UVC_QUIRK_MOTION 0x00000800
-+#define UVC_QUIRK_SINGLE_ISO 0x00001000
-
+ #define UVC_QUIRK_FORCE_Y8 0x00000800
+-
++#define UVC_QUIRK_MOTION 0x00001000
++#define UVC_QUIRK_SINGLE_ISO 0x00002000
++
/* Format flags */
#define UVC_FMT_FLAG_COMPRESSED 0x00000001
-@@ -551,6 +553,7 @@ struct uvc_device {
+ #define UVC_FMT_FLAG_STREAM 0x00000002
+@@ -550,6 +552,7 @@ struct uvc_device {
__u8 *status;
struct input_dev *input;
char input_phys[64];
@@ -244,3 +252,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
};
enum uvc_handle_state {
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0032-USB-dwc2-add-device_reset.patch b/target/linux/ramips/patches-4.3/0032-USB-dwc2-add-device_reset.patch
new file mode 100644
index 0000000000..ca6821e738
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0032-USB-dwc2-add-device_reset.patch
@@ -0,0 +1,34 @@
+From a758e0870c6d1e4b0272f6e7f9efa9face5534bb Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:49:07 +0100
+Subject: [PATCH 32/53] USB: dwc2: add device_reset()
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/usb/dwc2/hcd.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
+index f845c41..767c93a 100644
+--- a/drivers/usb/dwc2/hcd.c
++++ b/drivers/usb/dwc2/hcd.c
+@@ -47,6 +47,7 @@
+ #include <linux/io.h>
+ #include <linux/slab.h>
+ #include <linux/usb.h>
++#include <linux/reset.h>
+
+ #include <linux/usb/hcd.h>
+ #include <linux/usb/ch11.h>
+@@ -2841,6 +2842,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hsotg, int irq)
+
+ retval = -ENOMEM;
+
++ device_reset(hsotg->dev);
++
+ hcfg = readl(hsotg->regs + HCFG);
+ dev_dbg(hsotg->dev, "hcfg=%08x\n", hcfg);
+
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch b/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch
index f407578762..8f28f86556 100644
--- a/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch
+++ b/target/linux/ramips/patches-4.3/0033-USB-add-xhci-hooks.patch
@@ -1,6 +1,49 @@
+From 71fbde37e60c11f5a715c105d25b9c6cee8dae6c Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:14:03 +0100
+Subject: [PATCH 33/53] USB: add xhci hooks
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/usb/core/hcd-pci.c | 5 +
+ drivers/usb/core/hub.c | 2 +-
+ drivers/usb/core/port.c | 10 +-
+ drivers/usb/host/Kconfig | 9 +-
+ drivers/usb/host/Makefile | 10 +-
+ drivers/usb/host/mtk-phy-7621.c | 445 +++++
+ drivers/usb/host/mtk-phy-7621.h | 2871 +++++++++++++++++++++++++++++++++
+ drivers/usb/host/mtk-phy-ahb.c | 58 +
+ drivers/usb/host/mtk-phy.c | 102 ++
+ drivers/usb/host/mtk-phy.h | 179 ++
+ drivers/usb/host/pci-quirks.h | 2 +-
+ drivers/usb/host/xhci-dbg.c | 3 +
+ drivers/usb/host/xhci-mem.c | 11 +
+ drivers/usb/host/xhci-mtk-power.c | 115 ++
+ drivers/usb/host/xhci-mtk-power.h | 13 +
+ drivers/usb/host/xhci-mtk-scheduler.c | 608 +++++++
+ drivers/usb/host/xhci-mtk-scheduler.h | 77 +
+ drivers/usb/host/xhci-mtk.c | 265 +++
+ drivers/usb/host/xhci-mtk.h | 120 ++
+ drivers/usb/host/xhci-plat.c | 11 +
+ drivers/usb/host/xhci-ring.c | 104 ++
+ drivers/usb/host/xhci.c | 209 ++-
+ drivers/usb/host/xhci.h | 39 +
+ 23 files changed, 5257 insertions(+), 11 deletions(-)
+ create mode 100644 drivers/usb/host/mtk-phy-7621.c
+ create mode 100644 drivers/usb/host/mtk-phy-7621.h
+ create mode 100644 drivers/usb/host/mtk-phy-ahb.c
+ create mode 100644 drivers/usb/host/mtk-phy.c
+ create mode 100644 drivers/usb/host/mtk-phy.h
+ create mode 100644 drivers/usb/host/xhci-mtk-power.c
+ create mode 100644 drivers/usb/host/xhci-mtk-power.h
+ create mode 100644 drivers/usb/host/xhci-mtk-scheduler.c
+ create mode 100644 drivers/usb/host/xhci-mtk-scheduler.h
+ create mode 100644 drivers/usb/host/xhci-mtk.c
+ create mode 100644 drivers/usb/host/xhci-mtk.h
+
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
-@@ -214,8 +214,13 @@ int usb_hcd_pci_probe(struct pci_dev *de
+@@ -214,8 +214,13 @@
goto disable_pci;
}
@@ -16,7 +59,7 @@
/* EHCI, OHCI */
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
-@@ -1286,7 +1286,7 @@ static void hub_quiesce(struct usb_hub *
+@@ -1287,7 +1287,7 @@
if (type != HUB_SUSPEND) {
/* Disconnect all the children */
for (i = 0; i < hdev->maxchild; ++i) {
@@ -27,7 +70,7 @@
}
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
-@@ -480,8 +480,10 @@ void usb_hub_remove_port_device(struct u
+@@ -480,8 +480,10 @@
struct usb_port *port_dev = hub->ports[port1 - 1];
struct usb_port *peer;
@@ -44,7 +87,7 @@
}
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
-@@ -41,6 +41,13 @@ config USB_XHCI_PLATFORM
+@@ -41,6 +41,13 @@
If unsure, say N.
@@ -58,7 +101,7 @@
config USB_XHCI_MVEBU
tristate "xHCI support for Marvell Armada 375/38x"
select USB_XHCI_PLATFORM
-@@ -596,7 +603,7 @@ endif # USB_OHCI_HCD
+@@ -590,7 +597,7 @@
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
@@ -69,7 +112,7 @@
accessing the USB hardware in the PC (which is also called the USB
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
-@@ -16,7 +16,12 @@ xhci-hcd-y := xhci.o xhci-mem.o
+@@ -14,7 +14,12 @@
xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
xhci-hcd-y += xhci-trace.o
@@ -82,18 +125,17 @@
ifneq ($(CONFIG_USB_XHCI_MVEBU), )
xhci-plat-hcd-y += xhci-mvebu.o
endif
-@@ -26,9 +31,14 @@ endif
+@@ -24,11 +29,10 @@
obj-$(CONFIG_USB_WHCI_HCD) += whci/
+-ifneq ($(CONFIG_USB), )
+ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
- obj-$(CONFIG_PCI) += pci-quirks.o
-+endif
-
-+ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
- obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
-+endif
-+
+ obj-$(CONFIG_PCI) += pci-quirks.o
++ obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
+ endif
+-
+-obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
@@ -3792,7 +3834,7 @@
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
-@@ -67,6 +67,9 @@ static struct xhci_segment *xhci_segment
+@@ -67,6 +67,9 @@
static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
{
@@ -3802,7 +3844,7 @@
if (seg->trbs) {
dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
seg->trbs = NULL;
-@@ -1475,9 +1478,17 @@ int xhci_endpoint_init(struct xhci_hcd *
+@@ -1471,9 +1474,17 @@
max_burst = (usb_endpoint_maxp(&ep->desc)
& 0x1800) >> 11;
}
@@ -5038,7 +5080,7 @@
+#endif
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
-@@ -33,6 +33,13 @@ static void xhci_plat_quirks(struct devi
+@@ -43,6 +43,13 @@
* dev struct in order to setup MSI
*/
xhci->quirks |= XHCI_PLAT;
@@ -5052,7 +5094,7 @@
}
/* called during probe() after chip reset completes */
-@@ -79,7 +86,11 @@ static int xhci_plat_probe(struct platfo
+@@ -89,7 +96,11 @@
driver = &xhci_plat_hc_driver;
@@ -5066,7 +5108,7 @@
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
-@@ -254,16 +254,20 @@ static void inc_enq(struct xhci_hcd *xhc
+@@ -254,16 +254,20 @@
static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
unsigned int num_trbs)
{
@@ -5087,7 +5129,7 @@
return 1;
}
-@@ -2810,6 +2814,7 @@ static int prepare_ring(struct xhci_hcd
+@@ -2869,6 +2873,7 @@
next = ring->enqueue;
while (last_trb(xhci, ring, ring->enq_seg, next)) {
@@ -5095,7 +5137,7 @@
/* If we're not dealing with 0.95 hardware or isoc rings
* on AMD 0.96 host, clear the chain bit.
*/
-@@ -2819,6 +2824,9 @@ static int prepare_ring(struct xhci_hcd
+@@ -2878,6 +2883,9 @@
next->link.control &= cpu_to_le32(~TRB_CHAIN);
else
next->link.control |= cpu_to_le32(TRB_CHAIN);
@@ -5105,7 +5147,7 @@
wmb();
next->link.control ^= cpu_to_le32(TRB_CYCLE);
-@@ -2949,6 +2957,9 @@ static void giveback_first_trb(struct xh
+@@ -3008,6 +3016,9 @@
start_trb->field[3] |= cpu_to_le32(start_cycle);
else
start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
@@ -5115,7 +5157,7 @@
xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
}
-@@ -3004,6 +3015,29 @@ static u32 xhci_td_remainder(unsigned in
+@@ -3063,6 +3074,29 @@
return (remainder >> 10) << 17;
}
@@ -5145,7 +5187,7 @@
/*
* For xHCI 1.0 host controllers, TD size is the number of max packet sized
* packets remaining in the TD (*not* including this TRB).
-@@ -3161,6 +3195,7 @@ static int queue_bulk_sg_tx(struct xhci_
+@@ -3220,6 +3254,7 @@
}
/* Set the TRB length, TD size, and interrupter fields. */
@@ -5153,7 +5195,7 @@
if (xhci->hci_version < 0x100) {
remainder = xhci_td_remainder(
urb->transfer_buffer_length -
-@@ -3170,6 +3205,12 @@ static int queue_bulk_sg_tx(struct xhci_
+@@ -3229,6 +3264,12 @@
trb_buff_len, total_packet_count, urb,
num_trbs - 1);
}
@@ -5166,7 +5208,7 @@
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
-@@ -3234,6 +3275,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
+@@ -3293,6 +3334,9 @@
int running_total, trb_buff_len, ret;
unsigned int total_packet_count;
u64 addr;
@@ -5176,7 +5218,7 @@
if (urb->num_sgs)
return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
-@@ -3258,6 +3302,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
+@@ -3317,6 +3361,25 @@
num_trbs++;
running_total += TRB_MAX_BUFF_SIZE;
}
@@ -5202,7 +5244,7 @@
ret = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
-@@ -3334,6 +3397,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
+@@ -3393,6 +3456,7 @@
field |= TRB_ISP;
/* Set the TRB length, TD size, and interrupter fields. */
@@ -5210,7 +5252,7 @@
if (xhci->hci_version < 0x100) {
remainder = xhci_td_remainder(
urb->transfer_buffer_length -
-@@ -3343,6 +3407,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
+@@ -3402,6 +3466,10 @@
trb_buff_len, total_packet_count, urb,
num_trbs - 1);
}
@@ -5221,7 +5263,7 @@
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
-@@ -3432,7 +3500,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
+@@ -3491,7 +3559,11 @@
field |= 0x1;
/* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
@@ -5233,7 +5275,7 @@
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_TX_TYPE(TRB_DATA_IN);
-@@ -3456,7 +3528,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
+@@ -3515,7 +3587,12 @@
field = TRB_TYPE(TRB_DATA);
length_field = TRB_LEN(urb->transfer_buffer_length) |
@@ -5246,17 +5288,17 @@
TRB_INTR_TARGET(0);
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
-@@ -3579,6 +3656,9 @@ static int xhci_queue_isoc_tx(struct xhc
- u64 start_addr, addr;
- int i, j;
+@@ -3731,6 +3808,9 @@
bool more_trbs_coming;
+ struct xhci_virt_ep *xep;
+
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ int max_packet;
+#endif
-
+ xep = &xhci->devs[slot_id]->eps[ep_index];
ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
-@@ -3592,6 +3672,21 @@ static int xhci_queue_isoc_tx(struct xhc
+@@ -3744,6 +3824,21 @@
start_trb = &ep_ring->enqueue->generic;
start_cycle = ep_ring->cycle_state;
@@ -5278,7 +5320,7 @@
urb_priv = urb->hcpriv;
/* Queue the first TRB, even if it's zero-length */
for (i = 0; i < num_tds; i++) {
-@@ -3663,9 +3758,13 @@ static int xhci_queue_isoc_tx(struct xhc
+@@ -3828,9 +3923,13 @@
} else {
td->last_trb = ep_ring->enqueue;
field |= TRB_IOC;
@@ -5292,7 +5334,7 @@
/* Set BEI bit except for the last td */
if (i < num_tds - 1)
field |= TRB_BEI;
-@@ -3680,6 +3779,7 @@ static int xhci_queue_isoc_tx(struct xhc
+@@ -3845,6 +3944,7 @@
trb_buff_len = td_remain_len;
/* Set the TRB length, TD size, & interrupter fields. */
@@ -5300,7 +5342,7 @@
if (xhci->hci_version < 0x100) {
remainder = xhci_td_remainder(
td_len - running_total);
-@@ -3689,6 +3789,10 @@ static int xhci_queue_isoc_tx(struct xhc
+@@ -3854,6 +3954,10 @@
total_packet_count, urb,
(trbs_per_td - j - 1));
}
@@ -5330,7 +5372,7 @@
#define DRIVER_AUTHOR "Sarah Sharp"
#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
-@@ -46,6 +56,18 @@ static unsigned int quirks;
+@@ -46,6 +56,18 @@
module_param(quirks, uint, S_IRUGO);
MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
@@ -5349,7 +5391,7 @@
/* TODO: copied from ehci-hcd.c - can this be refactored? */
/*
* xhci_handshake - spin reading hc until handshake completes or fails
-@@ -199,7 +221,7 @@ int xhci_reset(struct xhci_hcd *xhci)
+@@ -198,7 +220,7 @@
return ret;
}
@@ -5358,7 +5400,7 @@
static int xhci_free_msi(struct xhci_hcd *xhci)
{
int i;
-@@ -449,6 +471,11 @@ static void compliance_mode_recovery(uns
+@@ -448,6 +470,11 @@
"Attempting compliance mode recovery");
hcd = xhci->shared_hcd;
@@ -5370,7 +5412,7 @@
if (hcd->state == HC_STATE_SUSPENDED)
usb_hcd_resume_root_hub(hcd);
-@@ -498,6 +525,9 @@ static bool xhci_compliance_mode_recover
+@@ -495,6 +522,9 @@
{
const char *dmi_product_name, *dmi_sys_vendor;
@@ -5380,7 +5422,7 @@
dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
if (!dmi_product_name || !dmi_sys_vendor)
-@@ -543,6 +573,10 @@ int xhci_init(struct usb_hcd *hcd)
+@@ -540,6 +570,10 @@
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"xHCI doesn't need link TRB QUIRK");
}
@@ -5391,7 +5433,7 @@
retval = xhci_mem_init(xhci, GFP_KERNEL);
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
-@@ -627,7 +661,11 @@ int xhci_run(struct usb_hcd *hcd)
+@@ -624,7 +658,11 @@
"// Set the interrupt modulation register");
temp = readl(&xhci->ir_set->irq_control);
temp &= ~ER_IRQ_INTERVAL_MASK;
@@ -5403,7 +5445,7 @@
writel(temp, &xhci->ir_set->irq_control);
/* Set the HCD state before we enable the irqs */
-@@ -652,6 +690,9 @@ int xhci_run(struct usb_hcd *hcd)
+@@ -649,6 +687,9 @@
xhci_queue_vendor_command(xhci, command, 0, 0, 0,
TRB_TYPE(TRB_NEC_GET_FW));
}
@@ -5413,7 +5455,7 @@
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Finished xhci_run for USB2 roothub");
return 0;
-@@ -1648,6 +1689,14 @@ int xhci_drop_endpoint(struct usb_hcd *h
+@@ -1639,6 +1680,14 @@
u32 drop_flag;
u32 new_add_flags, new_drop_flags;
int ret;
@@ -5428,7 +5470,7 @@
ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
if (ret <= 0)
-@@ -1695,6 +1744,40 @@ int xhci_drop_endpoint(struct usb_hcd *h
+@@ -1688,6 +1737,40 @@
xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
@@ -5469,7 +5511,7 @@
xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
(unsigned int) ep->desc.bEndpointAddress,
udev->slot_id,
-@@ -1727,6 +1810,19 @@ int xhci_add_endpoint(struct usb_hcd *hc
+@@ -1720,6 +1803,19 @@
u32 new_add_flags, new_drop_flags;
struct xhci_virt_device *virt_dev;
int ret = 0;
@@ -5489,7 +5531,7 @@
ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
if (ret <= 0) {
-@@ -1793,6 +1889,56 @@ int xhci_add_endpoint(struct usb_hcd *hc
+@@ -1783,6 +1879,56 @@
return -ENOMEM;
}
@@ -5546,7 +5588,7 @@
ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
-@@ -4463,8 +4609,14 @@ static u16 xhci_call_host_update_timeout
+@@ -4446,8 +4592,14 @@
u16 *timeout)
{
if (state == USB3_LPM_U1)
@@ -5561,7 +5603,7 @@
return xhci_calculate_u2_timeout(xhci, udev, desc);
return USB3_LPM_DISABLED;
-@@ -4849,7 +5001,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
+@@ -4839,7 +4991,9 @@
hcd->self.no_sg_constraint = 1;
/* XHCI controllers don't stop the ep queue on short packets :| */
@@ -5570,9 +5612,9 @@
+#endif
if (usb_hcd_is_primary_hcd(hcd)) {
- xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
-@@ -4912,6 +5066,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
- goto error;
+ xhci = hcd_to_xhci(hcd);
+@@ -4900,6 +5054,10 @@
+ return retval;
xhci_dbg(xhci, "Reset complete\n");
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
@@ -5582,7 +5624,7 @@
/* Set dma_mask and coherent_dma_mask to 64-bits,
* if xHC supports 64-bit addressing */
if (HCC_64BIT_ADDR(xhci->hcc_params) &&
-@@ -5006,8 +5164,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
+@@ -5005,8 +5163,57 @@
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
@@ -5633,7 +5675,7 @@
+ pPlatformDev->resource = xhci_resouce;
+ pPlatformDev->num_resources = ARRAY_SIZE(xhci_resouce);
+
-+ platform_device_register(&xhci_platform_dev);
++// platform_device_register(&xhci_platform_dev);
+
+#endif
+
@@ -5647,7 +5689,7 @@
#include "pci-quirks.h"
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
-+#define XHC_IRQ (22 + 8)
++#define XHC_IRQ (22 + 7)
+#define XHC_IO_START 0x1E1C0000
+#define XHC_IO_LENGTH 0x10000
+/* mtk scheduler bitmasks */
@@ -5664,7 +5706,7 @@
/* xHCI PCI Configuration Registers */
#define XHCI_SBRN_OFFSET (0x60)
-@@ -1587,8 +1602,12 @@ struct xhci_hcd {
+@@ -1597,8 +1612,12 @@
/* Compliance Mode Recovery Data */
struct timer_list comp_mode_recovery_timer;
u32 port_status_u0;
@@ -5676,8 +5718,8 @@
+#endif
};
- /* convert between an HCD pointer and the corresponding EHCI_HCD */
-@@ -1736,6 +1755,26 @@ void xhci_urb_free_priv(struct xhci_hcd
+ /* Platform specific overrides to generic XHCI hc_driver ops */
+@@ -1763,6 +1782,26 @@
void xhci_free_command(struct xhci_hcd *xhci,
struct xhci_command *command);
@@ -5703,4 +5745,4 @@
+
/* xHCI host controller glue */
typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
- int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+ int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec);
diff --git a/target/linux/ramips/patches-3.18/0033-NET-multi-phy-support.patch b/target/linux/ramips/patches-4.3/0034-NET-multi-phy-support.patch
index f6d2456bad..f163e3cbc6 100644
--- a/target/linux/ramips/patches-3.18/0033-NET-multi-phy-support.patch
+++ b/target/linux/ramips/patches-4.3/0034-NET-multi-phy-support.patch
@@ -1,7 +1,7 @@
-From 9c34372c25519234add1cfdfe2b69c0847f2037e Mon Sep 17 00:00:00 2001
+From 0b6eb1e68290243d439ee330ea8d0b239a5aec69 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 09:38:50 +0100
-Subject: [PATCH 33/57] NET: multi phy support
+Subject: [PATCH 34/53] NET: multi phy support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
@@ -9,9 +9,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
include/linux/phy.h | 1 +
2 files changed, 7 insertions(+), 3 deletions(-)
+diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
+index adb48ab..7eb83bd 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
-@@ -838,7 +838,8 @@ void phy_state_machine(struct work_struc
+@@ -843,7 +843,8 @@ void phy_state_machine(struct work_struct *work)
/* If the link is down, give up on negotiation for now */
if (!phydev->link) {
phydev->state = PHY_NOLINK;
@@ -21,7 +23,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
phydev->adjust_link(phydev->attached_dev);
break;
}
-@@ -911,7 +912,8 @@ void phy_state_machine(struct work_struc
+@@ -923,7 +924,8 @@ void phy_state_machine(struct work_struct *work)
netif_carrier_on(phydev->attached_dev);
} else {
phydev->state = PHY_NOLINK;
@@ -31,7 +33,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
}
phydev->adjust_link(phydev->attached_dev);
-@@ -923,7 +925,8 @@ void phy_state_machine(struct work_struc
+@@ -935,7 +937,8 @@ void phy_state_machine(struct work_struct *work)
case PHY_HALTED:
if (phydev->link) {
phydev->link = 0;
@@ -41,13 +43,18 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
phydev->adjust_link(phydev->attached_dev);
do_suspend = true;
}
+diff --git a/include/linux/phy.h b/include/linux/phy.h
+index 4a4e3a0..a260bdc 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -363,6 +363,7 @@ struct phy_device {
- struct phy_c45_device_ids c45_ids;
- bool is_c45;
- bool is_internal;
-+ bool no_auto_carrier_off;
+@@ -375,6 +375,7 @@ struct phy_device {
+ bool is_pseudo_fixed_link;
bool has_fixups;
+ bool suspended;
++ bool no_auto_carrier_off;
enum phy_state state;
+
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch b/target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
index ede6d7d476..e9f405daac 100644
--- a/target/linux/ramips/patches-3.18/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
+++ b/target/linux/ramips/patches-4.3/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch
@@ -1,12 +1,19 @@
-From c55d6cf3e2c593bf7d228c6532ec9bd8da82e09d Mon Sep 17 00:00:00 2001
+From 86ab021705a493a5276261953f4f2cb071df6722 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 22 Apr 2013 23:20:03 +0200
-Subject: [PATCH 35/57] NET: MIPS: add ralink SoC ethernet driver
+Subject: [PATCH 35/53] NET: MIPS: add ralink SoC ethernet driver
Add support for Ralink FE and ESW.
Signed-off-by: John Crispin <blogic@openwrt.org>
---
+ arch/mips/ralink/rt305x.c | 1 +
+ drivers/net/ethernet/Kconfig | 1 +
+ drivers/net/ethernet/Makefile | 1 +
+ 3 files changed, 3 insertions(+)
+
+diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
+index 51f33a5..d7c4ba4 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -199,6 +199,7 @@ void __init ralink_clk_init(void)
@@ -15,11 +22,13 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
ralink_clk_add("cpu", cpu_rate);
+ ralink_clk_add("sys", sys_rate);
ralink_clk_add("10000b00.spi", sys_rate);
+ ralink_clk_add("10000b40.spi", sys_rate);
ralink_clk_add("10000100.timer", wdt_rate);
- ralink_clk_add("10000120.watchdog", wdt_rate);
+diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
+index 05aa759..5628f2d 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
-@@ -152,6 +152,7 @@ source "drivers/net/ethernet/packetengin
+@@ -154,6 +154,7 @@ source "drivers/net/ethernet/packetengines/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/qualcomm/Kconfig"
@@ -27,13 +36,18 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/renesas/Kconfig"
source "drivers/net/ethernet/rdc/Kconfig"
+diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
+index ddfc808..cbfe95e 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
-@@ -62,6 +62,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
+@@ -64,6 +64,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_QUALCOMM) += qualcomm/
+obj-$(CONFIG_NET_RALINK) += ralink/
obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
- obj-$(CONFIG_SH_ETH) += renesas/
+ obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0041-mtd-fix-cfi-cmdset-0002-erase-status-check.patch b/target/linux/ramips/patches-4.3/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
index b51756dbfa..635f60475a 100644
--- a/target/linux/ramips/patches-3.18/0041-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
+++ b/target/linux/ramips/patches-4.3/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch
@@ -1,15 +1,17 @@
-From f0df443ca7d5d0e4d31aa6769ea12a8cf24d2cd8 Mon Sep 17 00:00:00 2001
+From 8e72a3a1be8f6328bd7ef491332ba541547b6086 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 15 Jul 2013 00:38:51 +0200
-Subject: [PATCH 41/57] mtd: fix cfi cmdset 0002 erase status check
+Subject: [PATCH 36/53] mtd: fix cfi cmdset 0002 erase status check
---
drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
+diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
+index c3624eb..60d960a 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -2291,7 +2291,7 @@ static int __xipram do_erase_chip(struct
+@@ -2290,7 +2290,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
chip->erase_suspended = 0;
}
@@ -18,7 +20,7 @@ Subject: [PATCH 41/57] mtd: fix cfi cmdset 0002 erase status check
break;
if (time_after(jiffies, timeo)) {
-@@ -2380,7 +2380,7 @@ static int __xipram do_erase_oneblock(st
+@@ -2379,7 +2379,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
chip->erase_suspended = 0;
}
@@ -27,3 +29,6 @@ Subject: [PATCH 41/57] mtd: fix cfi cmdset 0002 erase status check
xip_enable(map, chip, adr);
break;
}
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0042-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-4.3/0037-mtd-cfi-cmdset-0002-force-word-write.patch
index 971738c19a..7c1ea22a6b 100644
--- a/target/linux/ramips/patches-3.18/0042-mtd-cfi-cmdset-0002-force-word-write.patch
+++ b/target/linux/ramips/patches-4.3/0037-mtd-cfi-cmdset-0002-force-word-write.patch
@@ -1,12 +1,14 @@
-From 39010a26a34a56a7928f9217ac23e5138c5ea952 Mon Sep 17 00:00:00 2001
+From ee9081b2726a5ca8cde5497afdc5425e21ff8f8b Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 15 Jul 2013 00:39:21 +0200
-Subject: [PATCH 42/57] mtd: cfi cmdset 0002 force word write
+Subject: [PATCH 37/53] mtd: cfi cmdset 0002 force word write
---
drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
+diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
+index 60d960a..a663e3b 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -40,7 +40,7 @@
@@ -28,7 +30,7 @@ Subject: [PATCH 42/57] mtd: cfi cmdset 0002 force word write
static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
static void cfi_amdstd_sync (struct mtd_info *);
-@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct m
+@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd)
}
#endif
@@ -36,7 +38,7 @@ Subject: [PATCH 42/57] mtd: cfi cmdset 0002 force word write
static void fixup_use_write_buffers(struct mtd_info *mtd)
{
struct map_info *map = mtd->priv;
-@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(stru
+@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd)
mtd->_write = cfi_amdstd_write_buffers;
}
}
@@ -44,7 +46,7 @@ Subject: [PATCH 42/57] mtd: cfi cmdset 0002 force word write
/* Atmel chips don't use the same PRI format as AMD chips */
static void fixup_convert_atmel_pri(struct mtd_info *mtd)
-@@ -1789,6 +1793,7 @@ static int cfi_amdstd_write_words(struct
+@@ -1789,6 +1793,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
/*
* FIXME: interleaved mode not tested, and probably not supported!
*/
@@ -52,7 +54,7 @@ Subject: [PATCH 42/57] mtd: cfi cmdset 0002 force word write
static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
unsigned long adr, const u_char *buf,
int len)
-@@ -1917,7 +1922,6 @@ static int __xipram do_write_buffer(stru
+@@ -1916,7 +1921,6 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
return ret;
}
@@ -60,7 +62,7 @@ Subject: [PATCH 42/57] mtd: cfi cmdset 0002 force word write
static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
-@@ -1992,6 +1996,7 @@ static int cfi_amdstd_write_buffers(stru
+@@ -1991,6 +1995,7 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
return 0;
}
@@ -68,3 +70,6 @@ Subject: [PATCH 42/57] mtd: cfi cmdset 0002 force word write
/*
* Wait for the flash chip to become ready to write data
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0043-mtd-ralink-add-mt7620-nand-driver.patch b/target/linux/ramips/patches-4.3/0038-mtd-ralink-add-mt7620-nand-driver.patch
index 8ee26d5182..a381e21419 100644
--- a/target/linux/ramips/patches-3.18/0043-mtd-ralink-add-mt7620-nand-driver.patch
+++ b/target/linux/ramips/patches-4.3/0038-mtd-ralink-add-mt7620-nand-driver.patch
@@ -1,7 +1,7 @@
-From b915fe7cd934160bfaf2cd52f03c118abcae2419 Mon Sep 17 00:00:00 2001
+From fb6e1578cd73d7d81f675e75247a676423f32412 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 17 Nov 2013 17:41:46 +0100
-Subject: [PATCH 43/57] mtd: ralink: add mt7620 nand driver
+Subject: [PATCH 38/53] mtd: ralink: add mt7620 nand driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
@@ -13,6 +13,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
create mode 100644 drivers/mtd/maps/ralink_nand.c
create mode 100644 drivers/mtd/maps/ralink_nand.h
+diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
+index 7c95a65..c2739db 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -399,4 +399,8 @@ config MTD_LATCH_ADDR
@@ -24,6 +26,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ depends on RALINK && SOC_MT7620
+
endmenu
+diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
+index 141c91a..94d2aa0 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -43,3 +43,5 @@ obj-$(CONFIG_MTD_VMU) += vmu-flash.o
@@ -32,6 +36,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
+obj-$(CONFIG_MTD_NAND_MT7620) += ralink_nand.o
+
+diff --git a/drivers/mtd/maps/ralink_nand.c b/drivers/mtd/maps/ralink_nand.c
+new file mode 100644
+index 0000000..64f9119
--- /dev/null
+++ b/drivers/mtd/maps/ralink_nand.c
@@ -0,0 +1,2136 @@
@@ -2171,6 +2178,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
+
+MODULE_LICENSE("GPL");
+diff --git a/drivers/mtd/maps/ralink_nand.h b/drivers/mtd/maps/ralink_nand.h
+new file mode 100644
+index 0000000..a408ae9
--- /dev/null
+++ b/drivers/mtd/maps/ralink_nand.h
@@ -0,0 +1,232 @@
@@ -2406,3 +2416,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
+
+#endif
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0045-mtd-add-mt7621-nand-support.patch b/target/linux/ramips/patches-4.3/0039-mtd-add-mt7621-nand-support.patch
index 3999f54d7a..b84e666ed7 100644
--- a/target/linux/ramips/patches-3.18/0045-mtd-add-mt7621-nand-support.patch
+++ b/target/linux/ramips/patches-4.3/0039-mtd-add-mt7621-nand-support.patch
@@ -1,7 +1,7 @@
-From 5db075c5dd038fbf4b5a0196e10f4f9658236372 Mon Sep 17 00:00:00 2001
+From 0e1c4e3c97b83b4e7da65b1c56f0a7d40736ac53 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 11:05:17 +0100
-Subject: [PATCH 45/57] mtd: add mt7621 nand support
+Subject: [PATCH 39/53] mtd: add mt7621 nand support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
@@ -29,11 +29,13 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
create mode 100644 drivers/mtd/nand/nand_device_list.h
create mode 100644 drivers/mtd/nand/partition.h
+diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
+index 3324281..76cfc97 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
-@@ -516,4 +516,10 @@ config MTD_NAND_XWAY
- Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
- to the External Bus Unit (EBU).
+@@ -535,4 +535,10 @@ config MTD_NAND_HISI504
+ help
+ Enables support for NAND controller on Hisilicon SoC Hip04.
+config MTK_MTD_NAND
+ tristate "Support for MTK SoC NAND controller"
@@ -42,15 +44,20 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ select MTD_NAND_ECC
+
endif # MTD_NAND
+diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
+index 075a027..ec349e3 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
-@@ -50,5 +50,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740
- obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
- obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
- obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
+@@ -54,5 +54,6 @@ obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
+ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o
+ obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
+ obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
+obj-$(CONFIG_MTK_MTD_NAND) += mtk_nand.o bmt.o
nand-objs := nand_base.o nand_bbt.o nand_timings.o
+diff --git a/drivers/mtd/nand/bmt.c b/drivers/mtd/nand/bmt.c
+new file mode 100644
+index 0000000..0462871
--- /dev/null
+++ b/drivers/mtd/nand/bmt.c
@@ -0,0 +1,750 @@
@@ -804,6 +811,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+MODULE_AUTHOR("MediaTek");
+MODULE_DESCRIPTION("Bad Block mapping management for MediaTek NAND Flash Driver");
+#endif
+diff --git a/drivers/mtd/nand/bmt.h b/drivers/mtd/nand/bmt.h
+new file mode 100644
+index 0000000..2d30ea9
--- /dev/null
+++ b/drivers/mtd/nand/bmt.h
@@ -0,0 +1,80 @@
@@ -887,6 +897,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+unsigned short get_mapping_block_index(int index);
+
+#endif // #ifndef __BMT_H__
+diff --git a/drivers/mtd/nand/dev-nand.c b/drivers/mtd/nand/dev-nand.c
+new file mode 100644
+index 0000000..9fb5235
--- /dev/null
+++ b/drivers/mtd/nand/dev-nand.c
@@ -0,0 +1,63 @@
@@ -953,6 +966,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ return retval;
+}
+arch_initcall(mtk_nand_register);
+diff --git a/drivers/mtd/nand/mt6575_typedefs.h b/drivers/mtd/nand/mt6575_typedefs.h
+new file mode 100644
+index 0000000..a7b9647
--- /dev/null
+++ b/drivers/mtd/nand/mt6575_typedefs.h
@@ -0,0 +1,340 @@
@@ -1296,6 +1312,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
+#endif // _MT6575_TYPEDEFS_H
+
+diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
+new file mode 100644
+index 0000000..00e150c
--- /dev/null
+++ b/drivers/mtd/nand/mtk_nand.c
@@ -0,0 +1,2304 @@
@@ -3603,6 +3622,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+module_init(mtk_nand_init);
+module_exit(mtk_nand_exit);
+MODULE_LICENSE("GPL");
+diff --git a/drivers/mtd/nand/mtk_nand.h b/drivers/mtd/nand/mtk_nand.h
+new file mode 100644
+index 0000000..6db88c4
--- /dev/null
+++ b/drivers/mtd/nand/mtk_nand.h
@@ -0,0 +1,452 @@
@@ -4058,9 +4080,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+extern u32 CFG_BLOCKSIZE;
+#endif
+#endif
+diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
+index ceb68ca..04dbc69 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
-@@ -93,7 +93,7 @@ static struct nand_ecclayout nand_oob_12
+@@ -92,7 +92,7 @@ static struct nand_ecclayout nand_oob_128 = {
.length = 78} }
};
@@ -4069,7 +4093,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops);
-@@ -131,7 +131,7 @@ static int check_offs_len(struct mtd_inf
+@@ -130,7 +130,7 @@ static int check_offs_len(struct mtd_info *mtd,
*
* Release chip lock and wake up anyone waiting on the device.
*/
@@ -4078,7 +4102,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
{
struct nand_chip *chip = mtd->priv;
-@@ -803,7 +803,7 @@ static void panic_nand_get_device(struct
+@@ -820,7 +820,7 @@ static void panic_nand_get_device(struct nand_chip *chip,
*
* Get the device and lock it for exclusive access
*/
@@ -4087,9 +4111,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
nand_get_device(struct mtd_info *mtd, int new_state)
{
struct nand_chip *chip = mtd->priv;
+diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
+index 63a1a36..d036b9a 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
-@@ -1372,4 +1372,23 @@ int nand_markbad_bbt(struct mtd_info *mt
+@@ -1374,4 +1374,23 @@ int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
return ret;
}
@@ -4113,6 +4139,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+}
+
EXPORT_SYMBOL(nand_scan_bbt);
+diff --git a/drivers/mtd/nand/nand_def.h b/drivers/mtd/nand/nand_def.h
+new file mode 100644
+index 0000000..82e957d
--- /dev/null
+++ b/drivers/mtd/nand/nand_def.h
@@ -0,0 +1,123 @@
@@ -4239,6 +4268,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+#include "mt6575_typedefs.h"
+
+#endif /* __NAND_DEF_H__ */
+diff --git a/drivers/mtd/nand/nand_device_list.h b/drivers/mtd/nand/nand_device_list.h
+new file mode 100644
+index 0000000..4c36b3a
--- /dev/null
+++ b/drivers/mtd/nand/nand_device_list.h
@@ -0,0 +1,55 @@
@@ -4297,6 +4329,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
+
+#endif
+diff --git a/drivers/mtd/nand/partition.h b/drivers/mtd/nand/partition.h
+new file mode 100644
+index 0000000..034e1af
--- /dev/null
+++ b/drivers/mtd/nand/partition.h
@@ -0,0 +1,115 @@
@@ -4415,3 +4450,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+//#endif
+#undef RECONFIG_PARTITION_SIZE
+
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0075-mtk_nand_alloc_buffer.patch b/target/linux/ramips/patches-4.3/0040-nand-add-mtk-nand-hack-hook.patch
index ac20198ace..51fd8ee6a4 100644
--- a/target/linux/ramips/patches-3.18/0075-mtk_nand_alloc_buffer.patch
+++ b/target/linux/ramips/patches-4.3/0040-nand-add-mtk-nand-hack-hook.patch
@@ -1,38 +1,21 @@
-From patchwork Fri Nov 13 07:55:08 2015
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [OpenWrt-Devel,RFC] A patch for mt7621 nand controler. Revision 2.
-From: Kirill Berezin <fyiwdt@gmail.com>
-X-Patchwork-Id: 544092
-Message-Id: <CAOFwh=DZieEa4ZA0ex6G3OR2OgEeP6Fh+SSw=Zg-L0wWm1QRTA@mail.gmail.com>
-To: openwrt-devel@lists.openwrt.org
-Date: Fri, 13 Nov 2015 10:55:08 +0300
+From 61e17c2f864698033f4661e1fc7ba63d4d982491 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:21:55 +0100
+Subject: [PATCH 40/53] nand: add mtk-nand hack/hook
-Hello,
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/mtd/nand/mtk_nand.c | 34 ++++++++++++++++++++++++++++++----
+ drivers/mtd/nand/nand_base.c | 9 ++++++++-
+ drivers/mtd/nand/nand_device_list.h | 2 ++
+ include/linux/mtd/nand.h | 4 ++++
+ 4 files changed, 44 insertions(+), 5 deletions(-)
-It turned out that mtk_nand driver uses some sophisticated accounting and a
-general nand code must be patched.
-
-This patch adds required read and erase calls to a general nand code. I
-used a code for re6500 released by Linksys as a reference.
-
-All required operations (erase, write and read) are usable. However I found
-that jffs2 filesystem can be created only on top of a ubi volume. I tried
-to create jffs2 directly on mtd device but pages with clean markers are
-became uncorrectable.
-
-This patch also includes changes that I sent earlier.
-
-Best regards,
-Kirill.
-
-Signed-off-by: Kirill Berezin (fyiwdt@gmail.com)
-
-diff -urNb a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
---- a/drivers/mtd/nand/mtk_nand.c 2015-11-06 16:44:31.000000000 +0400
-+++ b/drivers/mtd/nand/mtk_nand.c 2015-11-12 10:06:20.080430855 +0400
-@@ -110,6 +110,10 @@
+diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
+index 00e150c..808e9c3 100644
+--- a/drivers/mtd/nand/mtk_nand.c
++++ b/drivers/mtd/nand/mtk_nand.c
+@@ -110,6 +110,10 @@ int part_num = NUM_PARTITIONS;
int manu_id;
int dev_id;
@@ -43,7 +26,7 @@ diff -urNb a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
static u8 local_oob_buf[NAND_MAX_OOBSIZE];
static u8 nand_badblock_offset = 0;
-@@ -348,7 +352,7 @@
+@@ -348,7 +352,7 @@ mtk_nand_check_bch_error(struct mtd_info *mtd, u8 * pDataBuf, u32 u4SecIndex, u3
if (0xF == u4ErrNum) {
mtd->ecc_stats.failed++;
bRet = false;
@@ -52,7 +35,7 @@ diff -urNb a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
} else {
for (i = 0; i < ((u4ErrNum + 1) >> 1); ++i) {
au4ErrBitLoc[i] = DRV_Reg32(ECC_DECEL0_REG32 + i);
-@@ -1422,7 +1426,7 @@
+@@ -1422,7 +1426,7 @@ mtk_nand_erase_hw(struct mtd_info *mtd, int page)
{
struct nand_chip *chip = (struct nand_chip *)mtd->priv;
@@ -61,7 +44,7 @@ diff -urNb a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
return chip->waitfunc(mtd, chip);
}
-@@ -2094,8 +2098,8 @@
+@@ -2094,8 +2098,8 @@ mtk_nand_probe(struct platform_device *pdev)
nand_chip->write_page = mtk_nand_write_page;
nand_chip->ecc.write_oob = mtk_nand_write_oob;
nand_chip->block_markbad = mtk_nand_block_markbad; // need to add nand_get_device()/nand_release_device().
@@ -72,7 +55,7 @@ diff -urNb a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
nand_chip->ecc.read_oob = mtk_nand_read_oob;
nand_chip->block_bad = mtk_nand_block_bad;
-@@ -2175,6 +2179,21 @@
+@@ -2175,6 +2179,21 @@ mtk_nand_probe(struct platform_device *pdev)
nand_chip->pagemask = (nand_chip->chipsize >> nand_chip->page_shift) - 1;
nand_chip->phys_erase_shift = ffs(mtd->erasesize) - 1;
nand_chip->chip_shift = ffs(nand_chip->chipsize) - 1;//0x1C;//ffs(nand_chip->chipsize) - 1;
@@ -94,7 +77,7 @@ diff -urNb a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
nand_chip->oob_poi = nand_chip->buffers->databuf + mtd->writesize;
nand_chip->badblockpos = 0;
-@@ -2251,6 +2270,9 @@
+@@ -2251,6 +2270,9 @@ out:
MSG(INIT, "[NFI] mtk_nand_probe fail, err = %d!\n", err);
nand_release(mtd);
platform_set_drvdata(pdev, NULL);
@@ -104,7 +87,7 @@ diff -urNb a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
kfree(host);
nand_disable_clock();
return err;
-@@ -2261,8 +2283,12 @@
+@@ -2261,8 +2283,12 @@ mtk_nand_remove(struct platform_device *pdev)
{
struct mtk_nand_host *host = platform_get_drvdata(pdev);
struct mtd_info *mtd = &host->mtd;
@@ -117,10 +100,11 @@ diff -urNb a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
kfree(host);
nand_disable_clock();
-diff -urNb a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
---- a/drivers/mtd/nand/nand_base.c 2015-11-06 16:44:31.000000000 +0400
-+++ b/drivers/mtd/nand/nand_base.c 2015-11-09 10:24:52.931720862 +0400
-@@ -1575,6 +1575,9 @@
+diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
+index 04dbc69..c5ed6fc 100644
+--- a/drivers/mtd/nand/nand_base.c
++++ b/drivers/mtd/nand/nand_base.c
+@@ -1592,6 +1592,9 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
__func__, buf);
read_retry:
@@ -130,7 +114,7 @@ diff -urNb a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
/*
-@@ -1593,6 +1596,7 @@
+@@ -1610,6 +1613,7 @@ read_retry:
else
ret = chip->ecc.read_page(mtd, chip, bufpoi,
oob_required, page);
@@ -138,7 +122,7 @@ diff -urNb a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
if (ret < 0) {
if (use_bufpoi)
/* Invalidate page cache */
-@@ -2770,8 +2774,11 @@
+@@ -2786,8 +2790,11 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
if (page <= chip->pagebuf && chip->pagebuf <
(page + pages_per_block))
chip->pagebuf = -1;
@@ -151,10 +135,11 @@ diff -urNb a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
/*
* See if operation failed and additional status checks are
-diff -urNb a/drivers/mtd/nand/nand_device_list.h b/drivers/mtd/nand/nand_device_list.h
---- a/drivers/mtd/nand/nand_device_list.h 2015-11-06 16:44:31.000000000 +0400
-+++ b/drivers/mtd/nand/nand_device_list.h 2015-11-06 11:13:26.000000000 +0400
-@@ -43,6 +43,8 @@
+diff --git a/drivers/mtd/nand/nand_device_list.h b/drivers/mtd/nand/nand_device_list.h
+index 4c36b3a..267fd0c 100644
+--- a/drivers/mtd/nand/nand_device_list.h
++++ b/drivers/mtd/nand/nand_device_list.h
+@@ -43,6 +43,8 @@ static const flashdev_info gen_FlashTable[]={
{0xADBC, 0x905554, 5, 16, 512, 128, 2048, 64, 0x10801011, "H9DA4GH4JJAMC", 0},
{0x01F1, 0x801D01, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "S34ML01G100TF", 0},
{0x92F1, 0x8095FF, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "F59L1G81A", 0},
@@ -163,10 +148,11 @@ diff -urNb a/drivers/mtd/nand/nand_device_list.h b/drivers/mtd/nand/nand_device_
{0xECD3, 0x519558, 5, 8, 1024, 128, 2048, 64, 0x44333, "K9K8G8000", 0},
{0xC2F1, 0x801DC2, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "MX30LF1G08AA", 0},
{0x98D3, 0x902676, 5, 8, 1024, 256, 4096, 224, 0x00C25332, "TC58NVG3S0F", 0},
-diff -urNb a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
---- a/include/linux/mtd/nand.h 2015-11-06 16:44:30.000000000 +0400
-+++ b/include/linux/mtd/nand.h 2015-11-09 10:18:55.704701886 +0400
-@@ -653,6 +653,10 @@
+diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
+index 272f429..b633b84 100644
+--- a/include/linux/mtd/nand.h
++++ b/include/linux/mtd/nand.h
+@@ -671,6 +671,10 @@ struct nand_chip {
int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offset, int data_len, const uint8_t *buf,
int oob_required, int page, int cached, int raw);
@@ -177,3 +163,6 @@ diff -urNb a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
int feature_addr, uint8_t *subfeature_para);
int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0049-DT-Add-documentation-for-spi-rt2880.patch b/target/linux/ramips/patches-4.3/0041-DT-Add-documentation-for-spi-rt2880.patch
index 23a6b3eadc..100465f1fa 100644
--- a/target/linux/ramips/patches-3.18/0049-DT-Add-documentation-for-spi-rt2880.patch
+++ b/target/linux/ramips/patches-4.3/0041-DT-Add-documentation-for-spi-rt2880.patch
@@ -1,7 +1,7 @@
-From 6ed8d03e5f4283b60dffea5c10ff1484141824e7 Mon Sep 17 00:00:00 2001
+From da6015e7f19d749f135f7ac55c4ec47b06faa868 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 9 Aug 2013 20:12:59 +0200
-Subject: [PATCH 49/57] DT: Add documentation for spi-rt2880
+Subject: [PATCH 41/53] DT: Add documentation for spi-rt2880
Describe the SPI master found on the MIPS based Ralink RT2880 SoC.
@@ -11,6 +11,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt
+diff --git a/Documentation/devicetree/bindings/spi/spi-rt2880.txt b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
+new file mode 100644
+index 0000000..068bc90
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
@@ -0,0 +1,28 @@
@@ -42,3 +45,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ };
+ };
+
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-4.3/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch
index 57986d33fe..92438ff424 100644
--- a/target/linux/ramips/patches-3.18/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch
+++ b/target/linux/ramips/patches-4.3/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch
@@ -1,7 +1,7 @@
-From fc006d0622ab8c43086b2c9018c03012db332033 Mon Sep 17 00:00:00 2001
+From 683af4ebb91a1600df1946ac4769d916b8a1be65 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 11:15:12 +0100
-Subject: [PATCH 50/57] SPI: ralink: add Ralink SoC spi driver
+Subject: [PATCH 42/53] SPI: ralink: add Ralink SoC spi driver
Add the driver needed to make SPI work on Ralink SoC.
@@ -10,13 +10,15 @@ Acked-by: John Crispin <blogic@openwrt.org>
---
drivers/spi/Kconfig | 6 +
drivers/spi/Makefile | 1 +
- drivers/spi/spi-rt2880.c | 432 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 439 insertions(+)
+ drivers/spi/spi-rt2880.c | 530 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 537 insertions(+)
create mode 100644 drivers/spi/spi-rt2880.c
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 4887f31..7c592ce 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -433,6 +433,12 @@ config SPI_QUP
+@@ -457,6 +457,12 @@ config SPI_QUP
This driver can also be built as a module. If so, the module
will be called spi_qup.
@@ -29,16 +31,21 @@ Acked-by: John Crispin <blogic@openwrt.org>
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
depends on ARCH_S3C24XX
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 6a7f6f9..3d690ef 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -65,6 +65,7 @@ obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa
- obj-$(CONFIG_SPI_QUP) += spi-qup.o
+@@ -68,6 +68,7 @@ obj-$(CONFIG_SPI_QUP) += spi-qup.o
obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
+ obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
+obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
+diff --git a/drivers/spi/spi-rt2880.c b/drivers/spi/spi-rt2880.c
+new file mode 100644
+index 0000000..c286c94
--- /dev/null
+++ b/drivers/spi/spi-rt2880.c
@@ -0,0 +1,530 @@
@@ -572,3 +579,6 @@ Acked-by: John Crispin <blogic@openwrt.org>
+MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL");
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0061-SPI-ralink-add-mt7621-SoC-spi-driver.patch b/target/linux/ramips/patches-4.3/0043-spi-add-mt7621-support.patch
index 5aa119e1df..716168f101 100644
--- a/target/linux/ramips/patches-3.18/0061-SPI-ralink-add-mt7621-SoC-spi-driver.patch
+++ b/target/linux/ramips/patches-4.3/0043-spi-add-mt7621-support.patch
@@ -1,6 +1,21 @@
+From 87a5fcd57c577cd94b5b080deb98885077c13a42 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Sun, 27 Jul 2014 09:49:07 +0100
+Subject: [PATCH 43/53] spi: add mt7621 support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/spi/Kconfig | 6 +
+ drivers/spi/Makefile | 1 +
+ drivers/spi/spi-mt7621.c | 480 ++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 487 insertions(+)
+ create mode 100644 drivers/spi/spi-mt7621.c
+
+diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
+index 7c592ce..2f05c85 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -439,6 +439,12 @@ config SPI_RT2880
+@@ -463,6 +463,12 @@ config SPI_RT2880
help
This selects a driver for the Ralink RT288x/RT305x SPI Controller.
@@ -13,16 +28,21 @@
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
depends on ARCH_S3C24XX
+diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
+index 3d690ef..5389710 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -46,6 +46,7 @@ obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70l
- obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
+@@ -49,6 +49,7 @@ obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mpc512x-psc.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
+ obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o
+obj-$(CONFIG_SPI_MT7621) += spi-mt7621.o
obj-$(CONFIG_SPI_MXS) += spi-mxs.o
obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o
obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
+diff --git a/drivers/spi/spi-mt7621.c b/drivers/spi/spi-mt7621.c
+new file mode 100644
+index 0000000..dedf4a1
--- /dev/null
+++ b/drivers/spi/spi-mt7621.c
@@ -0,0 +1,480 @@
@@ -506,3 +526,6 @@
+MODULE_DESCRIPTION("MT7621 SPI driver");
+MODULE_AUTHOR("Felix Fietkau <nbd@openwrt.org>");
+MODULE_LICENSE("GPL");
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-4.3/0044-i2c-MIPS-adds-ralink-I2C-driver.patch
index 5618652dff..f600bd570e 100644
--- a/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch
+++ b/target/linux/ramips/patches-4.3/0044-i2c-MIPS-adds-ralink-I2C-driver.patch
@@ -1,18 +1,21 @@
-From 225f36695bb07dad9510f9affd79e63f1a44a195 Mon Sep 17 00:00:00 2001
+From 723b8beaabf3c3c4b1ce69480141f1e926f3f3b2 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 09:52:56 +0100
-Subject: [PATCH 52/57] i2c: MIPS: adds ralink I2C driver
+Subject: [PATCH 44/53] i2c: MIPS: adds ralink I2C driver
Signed-off-by: John Crispin <blogic@openwrt.org>
---
.../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++
drivers/i2c/busses/Kconfig | 4 +
drivers/i2c/busses/Makefile | 1 +
- drivers/i2c/busses/i2c-ralink.c | 274 ++++++++++++++++++++
- 4 files changed, 306 insertions(+)
+ drivers/i2c/busses/i2c-ralink.c | 327 ++++++++++++++++++++
+ 4 files changed, 359 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
create mode 100644 drivers/i2c/busses/i2c-ralink.c
+diff --git a/Documentation/devicetree/bindings/i2c/i2c-ralink.txt b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
+new file mode 100644
+index 0000000..8fa8ac3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
@@ -0,0 +1,27 @@
@@ -43,9 +46,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ };
+ };
+};
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index 08b8617..53d565b 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -711,6 +711,10 @@ config I2C_RK3X
+@@ -803,6 +803,10 @@ config I2C_RK3X
This driver can also be built as a module. If so, the module will
be called i2c-rk3x.
@@ -56,9 +61,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
config HAVE_S3C2410_I2C
bool
help
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index 6df3b30..2edd32c 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
-@@ -66,6 +66,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
+@@ -75,6 +75,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
@@ -66,6 +73,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
obj-$(CONFIG_I2C_QUP) += i2c-qup.o
obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
+diff --git a/drivers/i2c/busses/i2c-ralink.c b/drivers/i2c/busses/i2c-ralink.c
+new file mode 100644
+index 0000000..debfb18
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ralink.c
@@ -0,0 +1,327 @@
@@ -396,3 +406,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+MODULE_DESCRIPTION("Ralink I2c host driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:Ralink-I2C");
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch b/target/linux/ramips/patches-4.3/0045-i2c-add-mt7621-driver.patch
index 9b9a72bc7b..17ff8d2bb2 100644
--- a/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch
+++ b/target/linux/ramips/patches-4.3/0045-i2c-add-mt7621-driver.patch
@@ -1,6 +1,21 @@
+From d5c54ff3d1db0a4348fa04d8e78f3bf6063e3afc Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:21:27 +0100
+Subject: [PATCH 45/53] i2c: add mt7621 driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/i2c/busses/Kconfig | 4 +
+ drivers/i2c/busses/Makefile | 1 +
+ drivers/i2c/busses/i2c-mt7621.c | 303 +++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 308 insertions(+)
+ create mode 100644 drivers/i2c/busses/i2c-mt7621.c
+
+diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
+index 53d565b..073bfe3 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -715,6 +715,10 @@ config I2C_RALINK
+@@ -807,6 +807,10 @@ config I2C_RALINK
tristate "Ralink I2C Controller"
select OF_I2C
@@ -11,9 +26,11 @@
config HAVE_S3C2410_I2C
bool
help
+diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
+index 2edd32c..764e16e 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
-@@ -67,6 +67,7 @@ obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
+@@ -76,6 +76,7 @@ obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o
@@ -21,6 +38,9 @@
obj-$(CONFIG_I2C_QUP) += i2c-qup.o
obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
obj-$(CONFIG_I2C_RK3X) += i2c-rk3x.o
+diff --git a/drivers/i2c/busses/i2c-mt7621.c b/drivers/i2c/busses/i2c-mt7621.c
+new file mode 100644
+index 0000000..646ca40
--- /dev/null
+++ b/drivers/i2c/busses/i2c-mt7621.c
@@ -0,0 +1,303 @@
@@ -327,3 +347,6 @@
+MODULE_DESCRIPTION("MT7621 I2c host driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:MT7621-I2C");
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-4.3/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
index 2932eb6b07..dac572f336 100644
--- a/target/linux/ramips/patches-3.18/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
+++ b/target/linux/ramips/patches-4.3/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch
@@ -1,7 +1,7 @@
-From f954801c6f48fc291c39ca8a888dbdfda1021415 Mon Sep 17 00:00:00 2001
+From 23147af14531cbdada194b94120ef8774f46292d Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Thu, 13 Nov 2014 19:08:40 +0100
-Subject: [PATCH] mmc: MIPS: ralink: add sdhci for mt7620a SoC
+Subject: [PATCH 46/53] mmc: MIPS: ralink: add sdhci for mt7620a SoC
Signed-off-by: John Crispin <blogic@openwrt.org>
---
@@ -11,10 +11,10 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
drivers/mmc/host/mtk-mmc/Makefile | 42 +
drivers/mmc/host/mtk-mmc/board.h | 137 ++
drivers/mmc/host/mtk-mmc/dbg.c | 347 ++++
- drivers/mmc/host/mtk-mmc/dbg.h | 153 ++
+ drivers/mmc/host/mtk-mmc/dbg.h | 156 ++
drivers/mmc/host/mtk-mmc/mt6575_sd.h | 1001 +++++++++++
- drivers/mmc/host/mtk-mmc/sd.c | 3041 ++++++++++++++++++++++++++++++++++
- 9 files changed, 4740 insertions(+)
+ drivers/mmc/host/mtk-mmc/sd.c | 3060 ++++++++++++++++++++++++++++++++++
+ 9 files changed, 4762 insertions(+)
create mode 100644 drivers/mmc/host/mtk-mmc/Kconfig
create mode 100644 drivers/mmc/host/mtk-mmc/Makefile
create mode 100644 drivers/mmc/host/mtk-mmc/board.h
@@ -23,14 +23,18 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
create mode 100644 drivers/mmc/host/mtk-mmc/mt6575_sd.h
create mode 100644 drivers/mmc/host/mtk-mmc/sd.c
+diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
+index 8a1e349..47833d1 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
-@@ -773,3 +773,5 @@ config MMC_SUNXI
- help
- This selects support for the SD/MMC Host Controller on
- Allwinner sunxi SoCs.
+@@ -793,3 +793,5 @@ config MMC_MTK
+ If you have a machine with a integrated SD/MMC card reader, say Y or M here.
+ This is needed if support for any SD/SDIO/MMC devices is required.
+ If unsure, say N.
+
+source "drivers/mmc/host/mtk-mmc/Kconfig"
+diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
+index 4f3452a..69dd05f 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -2,6 +2,7 @@
@@ -41,6 +45,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
obj-$(CONFIG_MMC_ARMMMCI) += mmci.o
obj-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o
obj-$(CONFIG_MMC_PXA) += pxamci.o
+diff --git a/drivers/mmc/host/mtk-mmc/Kconfig b/drivers/mmc/host/mtk-mmc/Kconfig
+new file mode 100644
+index 0000000..a58b0f3
--- /dev/null
+++ b/drivers/mmc/host/mtk-mmc/Kconfig
@@ -0,0 +1,16 @@
@@ -60,6 +67,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ bool "eMMC 8-bit support"
+ depends on MTK_MMC && RALINK_MT7628
+
+diff --git a/drivers/mmc/host/mtk-mmc/Makefile b/drivers/mmc/host/mtk-mmc/Makefile
+new file mode 100644
+index 0000000..caead0b
--- /dev/null
+++ b/drivers/mmc/host/mtk-mmc/Makefile
@@ -0,0 +1,42 @@
@@ -105,6 +115,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
+clean:
+ @rm -f *.o modules.order .*.cmd
+diff --git a/drivers/mmc/host/mtk-mmc/board.h b/drivers/mmc/host/mtk-mmc/board.h
+new file mode 100644
+index 0000000..33bfc7b
--- /dev/null
+++ b/drivers/mmc/host/mtk-mmc/board.h
@@ -0,0 +1,137 @@
@@ -245,6 +258,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
+#endif /* __ARCH_ARM_MACH_BOARD_H */
+
+diff --git a/drivers/mmc/host/mtk-mmc/dbg.c b/drivers/mmc/host/mtk-mmc/dbg.c
+new file mode 100644
+index 0000000..4dc115b
--- /dev/null
+++ b/drivers/mmc/host/mtk-mmc/dbg.c
@@ -0,0 +1,347 @@
@@ -595,6 +611,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+}
+EXPORT_SYMBOL_GPL(msdc_debug_proc_init);
+#endif
+diff --git a/drivers/mmc/host/mtk-mmc/dbg.h b/drivers/mmc/host/mtk-mmc/dbg.h
+new file mode 100644
+index 0000000..e58c431
--- /dev/null
+++ b/drivers/mmc/host/mtk-mmc/dbg.h
@@ -0,0 +1,156 @@
@@ -754,6 +773,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+void msdc_performance(u32 opcode, u32 sizes, u32 bRx, u32 ticks);
+
+#endif
+diff --git a/drivers/mmc/host/mtk-mmc/mt6575_sd.h b/drivers/mmc/host/mtk-mmc/mt6575_sd.h
+new file mode 100644
+index 0000000..e90c4f1
--- /dev/null
+++ b/drivers/mmc/host/mtk-mmc/mt6575_sd.h
@@ -0,0 +1,1001 @@
@@ -1758,6 +1780,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+
+#endif
+
+diff --git a/drivers/mmc/host/mtk-mmc/sd.c b/drivers/mmc/host/mtk-mmc/sd.c
+new file mode 100644
+index 0000000..d240b46
--- /dev/null
+++ b/drivers/mmc/host/mtk-mmc/sd.c
@@ -0,0 +1,3060 @@
@@ -4821,3 +4846,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+MODULE_AUTHOR("Infinity Chen <infinity.chen@mediatek.com>");
+
+EXPORT_SYMBOL(msdc_6575_host);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0054-DMA-ralink-add-rt2880-dma-engine.patch b/target/linux/ramips/patches-4.3/0047-DMA-ralink-add-rt2880-dma-engine.patch
index fa0f42f108..55a6b0a3d4 100644
--- a/target/linux/ramips/patches-3.18/0054-DMA-ralink-add-rt2880-dma-engine.patch
+++ b/target/linux/ramips/patches-4.3/0047-DMA-ralink-add-rt2880-dma-engine.patch
@@ -1,23 +1,24 @@
-From cf93418a4bd5e69f069a65da92537bd4d6191223 Mon Sep 17 00:00:00 2001
+From f1c4d9e622c800e1f38b3818f933ec7597d1ccfb Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 09:29:51 +0100
-Subject: [PATCH 54/57] DMA: ralink: add rt2880 dma engine
+Subject: [PATCH 47/53] DMA: ralink: add rt2880 dma engine
Signed-off-by: John Crispin <blogic@openwrt.org>
---
drivers/dma/Kconfig | 6 +
drivers/dma/Makefile | 1 +
- drivers/dma/dmaengine.c | 26 ++
drivers/dma/ralink-gdma.c | 577 +++++++++++++++++++++++++++++++++++++++++++++
include/linux/dmaengine.h | 1 +
- 5 files changed, 611 insertions(+)
+ 4 files changed, 585 insertions(+)
create mode 100644 drivers/dma/ralink-gdma.c
+diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
+index b458475..2d5ae4a 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
-@@ -409,6 +409,12 @@ config NBPFAXI_DMA
- help
- Support for "Type-AXI" NBPF DMA IPs from Renesas
+@@ -40,6 +40,12 @@ config ASYNC_TX_ENABLE_CHANNEL_SWITCH
+ config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
+ bool
+config DMA_RALINK
+ tristate "RALINK DMA support"
@@ -28,13 +29,20 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
config DMA_ENGINE
bool
+diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
+index 7711a71..b33c434 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
-@@ -49,3 +49,4 @@ obj-y += xilinx/
- obj-$(CONFIG_INTEL_MIC_X100_DMA) += mic_x100_dma.o
- obj-$(CONFIG_NBPFAXI_DMA) += nbpfaxi.o
- obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o
+@@ -65,5 +65,6 @@ obj-$(CONFIG_TI_DMA_CROSSBAR) += ti-dma-crossbar.o
+ obj-$(CONFIG_TI_EDMA) += edma.o
+ obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
+ obj-$(CONFIG_ZX_DMA) += zx296702_dma.o
+obj-$(CONFIG_DMA_RALINK) += ralink-gdma.o
+
+ obj-y += xilinx/
+diff --git a/drivers/dma/ralink-gdma.c b/drivers/dma/ralink-gdma.c
+new file mode 100644
+index 0000000..2c3cace
--- /dev/null
+++ b/drivers/dma/ralink-gdma.c
@@ -0,0 +1,577 @@
@@ -615,13 +623,18 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("GDMA4740 DMA driver");
+MODULE_LICENSE("GPLv2");
+diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
+index 7ea9184..d371bf1 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
-@@ -1058,6 +1058,7 @@ struct dma_chan *dma_request_slave_chann
- const char *name);
- struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name);
- void dma_release_channel(struct dma_chan *chan);
+@@ -496,6 +496,7 @@ static inline void dma_set_unmap(struct dma_async_tx_descriptor *tx,
+ struct dmaengine_unmap_data *
+ dmaengine_get_unmap_data(struct device *dev, int nr, gfp_t flags);
+ void dmaengine_unmap_put(struct dmaengine_unmap_data *unmap);
+struct dma_chan *dma_get_slave_channel(struct dma_chan *chan);
#else
- static inline struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type)
- {
+ static inline void dma_set_unmap(struct dma_async_tx_descriptor *tx,
+ struct dmaengine_unmap_data *unmap)
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0055-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-4.3/0048-asoc-add-mt7620-support.patch
index b439b9d3b8..004eb68101 100644
--- a/target/linux/ramips/patches-3.18/0055-asoc-add-mt7620-support.patch
+++ b/target/linux/ramips/patches-4.3/0048-asoc-add-mt7620-support.patch
@@ -1,7 +1,7 @@
-From 241188942603dc73f62cf2553c53cae2235c9957 Mon Sep 17 00:00:00 2001
+From 7f29222b1731e8182ba94a331531dec18865a1e4 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 27 Jul 2014 09:31:47 +0100
-Subject: [PATCH 55/57] asoc: add mt7620 support
+Subject: [PATCH 48/53] asoc: add mt7620 support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
@@ -10,15 +10,16 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
sound/soc/Makefile | 1 +
sound/soc/ralink/Kconfig | 15 ++
sound/soc/ralink/Makefile | 11 +
- sound/soc/ralink/mt7620-i2s.c | 466 ++++++++++++++++++++++++++++++++++++++
- sound/soc/ralink/mt7620-wm8960.c | 125 ++++++++++
- sound/soc/soc-io.c | 10 -
- 8 files changed, 621 insertions(+), 10 deletions(-)
+ sound/soc/ralink/mt7620-i2s.c | 436 ++++++++++++++++++++++++++++++++++++++
+ sound/soc/ralink/mt7620-wm8960.c | 233 ++++++++++++++++++++
+ 7 files changed, 699 insertions(+)
create mode 100644 sound/soc/ralink/Kconfig
create mode 100644 sound/soc/ralink/Makefile
create mode 100644 sound/soc/ralink/mt7620-i2s.c
create mode 100644 sound/soc/ralink/mt7620-wm8960.c
+diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
+index da85bbf..371baa5 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -15,6 +15,7 @@
@@ -37,26 +38,33 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
__iomem void *rt_memc_membase;
__iomem void *plat_of_remap_node(const char *node)
+diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
+index 225bfda..76ce95c 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
-@@ -48,6 +48,7 @@ source "sound/soc/intel/Kconfig"
- source "sound/soc/mxs/Kconfig"
+@@ -53,6 +53,7 @@ source "sound/soc/mxs/Kconfig"
source "sound/soc/pxa/Kconfig"
+ source "sound/soc/qcom/Kconfig"
source "sound/soc/rockchip/Kconfig"
+source "sound/soc/ralink/Kconfig"
source "sound/soc/samsung/Kconfig"
source "sound/soc/sh/Kconfig"
source "sound/soc/sirf/Kconfig"
+diff --git a/sound/soc/Makefile b/sound/soc/Makefile
+index 134aca1..e9d8e0e 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
-@@ -25,6 +25,7 @@ obj-$(CONFIG_SND_SOC) += omap/
- obj-$(CONFIG_SND_SOC) += kirkwood/
+@@ -35,6 +35,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/
obj-$(CONFIG_SND_SOC) += pxa/
+ obj-$(CONFIG_SND_SOC) += qcom/
obj-$(CONFIG_SND_SOC) += rockchip/
+obj-$(CONFIG_SND_SOC) += ralink/
obj-$(CONFIG_SND_SOC) += samsung/
obj-$(CONFIG_SND_SOC) += sh/
obj-$(CONFIG_SND_SOC) += sirf/
+diff --git a/sound/soc/ralink/Kconfig b/sound/soc/ralink/Kconfig
+new file mode 100644
+index 0000000..d462622
--- /dev/null
+++ b/sound/soc/ralink/Kconfig
@@ -0,0 +1,15 @@
@@ -75,6 +83,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+ help
+ Say Y if you want to add support for ASoC audio on the Qi LB60 board
+ a.k.a Qi Ben NanoNote.
+diff --git a/sound/soc/ralink/Makefile b/sound/soc/ralink/Makefile
+new file mode 100644
+index 0000000..3d79980
--- /dev/null
+++ b/sound/soc/ralink/Makefile
@@ -0,0 +1,11 @@
@@ -89,6 +100,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+snd-soc-mt7620-wm8960-objs := mt7620-wm8960.o
+
+obj-$(CONFIG_SND_MT7620_SOC_WM8960) += snd-soc-mt7620-wm8960.o
+diff --git a/sound/soc/ralink/mt7620-i2s.c b/sound/soc/ralink/mt7620-i2s.c
+new file mode 100644
+index 0000000..2ce9b21
--- /dev/null
+++ b/sound/soc/ralink/mt7620-i2s.c
@@ -0,0 +1,436 @@
@@ -528,6 +542,9 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+MODULE_DESCRIPTION("Ingenic JZ4740 SoC I2S driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mt7620-i2s");
+diff --git a/sound/soc/ralink/mt7620-wm8960.c b/sound/soc/ralink/mt7620-wm8960.c
+new file mode 100644
+index 0000000..3389988
--- /dev/null
+++ b/sound/soc/ralink/mt7620-wm8960.c
@@ -0,0 +1,233 @@
@@ -764,3 +781,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+MODULE_DESCRIPTION("Freescale i.MX WM8962 ASoC machine driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:mt7620-wm8962");
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0056-watchdog-add-MT7621-support.patch b/target/linux/ramips/patches-4.3/0049-watchdog-add-MT7621-support.patch
index 9a079d8e38..0d410bb28a 100644
--- a/target/linux/ramips/patches-3.18/0056-watchdog-add-MT7621-support.patch
+++ b/target/linux/ramips/patches-4.3/0049-watchdog-add-MT7621-support.patch
@@ -1,7 +1,7 @@
-From 6a42dd698ddf91b6e9902b17e21dc13c6ae412ff Mon Sep 17 00:00:00 2001
+From 77fe64de72317c0e090d82056e7a6a073f2972b4 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Sun, 16 Mar 2014 05:24:42 +0000
-Subject: [PATCH 56/57] watchdog: add MT7621 support
+Subject: [PATCH 49/53] watchdog: add MT7621 support
Signed-off-by: John Crispin <blogic@openwrt.org>
---
@@ -11,9 +11,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
3 files changed, 193 insertions(+)
create mode 100644 drivers/watchdog/mt7621_wdt.c
+diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
+index 79e1aa1..0710aa1 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
-@@ -1257,6 +1257,13 @@ config RALINK_WDT
+@@ -1337,6 +1337,13 @@ config RALINK_WDT
help
Hardware driver for the Ralink SoC Watchdog Timer.
@@ -27,16 +29,21 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
# PARISC Architecture
# POWERPC Architecture
+diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
+index 0c616e3..4d3b4b1 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
-@@ -143,6 +143,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
- octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
- obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
- obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
+@@ -68,6 +68,7 @@ obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
+ obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
+ obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
+ obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
+obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
- # PARISC Architecture
-
+ # AVR32 Architecture
+ obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
+diff --git a/drivers/watchdog/mt7621_wdt.c b/drivers/watchdog/mt7621_wdt.c
+new file mode 100644
+index 0000000..ec2c897
--- /dev/null
+++ b/drivers/watchdog/mt7621_wdt.c
@@ -0,0 +1,185 @@
@@ -225,3 +232,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org>
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0303-alsa.patch b/target/linux/ramips/patches-4.3/0050-alsa-add-ralink-sdk-driver.patch
index d6d489249f..1048396231 100644
--- a/target/linux/ramips/patches-3.18/0303-alsa.patch
+++ b/target/linux/ramips/patches-4.3/0050-alsa-add-ralink-sdk-driver.patch
@@ -1,23 +1,72 @@
+From f98ffa1f01240407e39c1b53135312db73f044c6 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:30:48 +0100
+Subject: [PATCH 50/53] alsa: add ralink sdk driver
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ sound/soc/Kconfig | 1 +
+ sound/soc/Makefile | 1 +
+ sound/soc/codecs/Kconfig | 2 +-
+ sound/soc/codecs/wm8960.c | 120 +-
+ sound/soc/codecs/wm8960.h | 64 +
+ sound/soc/mtk/Kconfig | 35 +
+ sound/soc/mtk/Makefile | 39 +
+ sound/soc/mtk/i2c_wm8960.c | 492 ++++++
+ sound/soc/mtk/i2c_wm8960.h | 288 ++++
+ sound/soc/mtk/i2s_ctrl.c | 3524 ++++++++++++++++++++++++++++++++++++++++
+ sound/soc/mtk/i2s_ctrl.h | 523 ++++++
+ sound/soc/mtk/i2s_debug.c | 698 ++++++++
+ sound/soc/mtk/mt76xx_i2s.c | 304 ++++
+ sound/soc/mtk/mt76xx_i2s.h | 18 +
+ sound/soc/mtk/mt76xx_machine.c | 317 ++++
+ sound/soc/mtk/mt76xx_machine.h | 21 +
+ sound/soc/mtk/mt76xx_pcm.c | 499 ++++++
+ sound/soc/mtk/ralink_gdma.c | 918 +++++++++++
+ sound/soc/mtk/ralink_gdma.h | 326 ++++
+ sound/soc/soc-core.c | 3 +-
+ 20 files changed, 8174 insertions(+), 19 deletions(-)
+ create mode 100644 sound/soc/mtk/Kconfig
+ create mode 100644 sound/soc/mtk/Makefile
+ create mode 100644 sound/soc/mtk/i2c_wm8960.c
+ create mode 100644 sound/soc/mtk/i2c_wm8960.h
+ create mode 100644 sound/soc/mtk/i2s_ctrl.c
+ create mode 100644 sound/soc/mtk/i2s_ctrl.h
+ create mode 100644 sound/soc/mtk/i2s_debug.c
+ create mode 100644 sound/soc/mtk/mt76xx_i2s.c
+ create mode 100644 sound/soc/mtk/mt76xx_i2s.h
+ create mode 100644 sound/soc/mtk/mt76xx_machine.c
+ create mode 100644 sound/soc/mtk/mt76xx_machine.h
+ create mode 100644 sound/soc/mtk/mt76xx_pcm.c
+ create mode 100644 sound/soc/mtk/ralink_gdma.c
+ create mode 100644 sound/soc/mtk/ralink_gdma.h
+
+diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
+index 76ce95c..09aa2c7 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
-@@ -56,6 +56,7 @@ source "sound/soc/spear/Kconfig"
- source "sound/soc/tegra/Kconfig"
- source "sound/soc/txx9/Kconfig"
+@@ -64,6 +64,7 @@ source "sound/soc/txx9/Kconfig"
source "sound/soc/ux500/Kconfig"
+ source "sound/soc/xtensa/Kconfig"
+ source "sound/soc/zte/Kconfig"
+source "sound/soc/mtk/Kconfig"
# Supported codecs
source "sound/soc/codecs/Kconfig"
+diff --git a/sound/soc/Makefile b/sound/soc/Makefile
+index e9d8e0e..a3c6b43 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
-@@ -33,3 +33,4 @@ obj-$(CONFIG_SND_SOC) += spear/
- obj-$(CONFIG_SND_SOC) += tegra/
- obj-$(CONFIG_SND_SOC) += txx9/
+@@ -46,3 +46,4 @@ obj-$(CONFIG_SND_SOC) += txx9/
obj-$(CONFIG_SND_SOC) += ux500/
+ obj-$(CONFIG_SND_SOC) += xtensa/
+ obj-$(CONFIG_SND_SOC) += zte/
+obj-$(CONFIG_SND_SOC) += mtk/
+diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
+index 0c9733e..276a4c5 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
-@@ -725,7 +725,7 @@ config SND_SOC_WM8955
+@@ -816,7 +816,7 @@ config SND_SOC_WM8955
tristate
config SND_SOC_WM8960
@@ -26,6 +75,316 @@
config SND_SOC_WM8961
tristate
+diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
+index dbd8840..3118f5c 100644
+--- a/sound/soc/codecs/wm8960.c
++++ b/sound/soc/codecs/wm8960.c
+@@ -27,6 +27,7 @@
+ #include <sound/wm8960.h>
+
+ #include "wm8960.h"
++#include "../mtk/i2c_wm8960.h"
+
+ /* R25 - Power 1 */
+ #define WM8960_VMID_MASK 0x180
+@@ -57,10 +58,10 @@ static int wm8960_set_pll(struct snd_soc_codec *codec,
+ * using 2 wire for device control, so we cache them instead.
+ */
+ static const struct reg_default wm8960_reg_defaults[] = {
+- { 0x0, 0x00a7 },
+- { 0x1, 0x00a7 },
+- { 0x2, 0x0000 },
+- { 0x3, 0x0000 },
++ { 0x0, 0x002b },
++ { 0x1, 0x002b },
++ { 0x2, 0x00ff },
++ { 0x3, 0x00ff },
+ { 0x4, 0x0000 },
+ { 0x5, 0x0008 },
+ { 0x6, 0x0000 },
+@@ -92,8 +93,8 @@ static const struct reg_default wm8960_reg_defaults[] = {
+ { 0x25, 0x0050 },
+ { 0x26, 0x0000 },
+ { 0x27, 0x0000 },
+- { 0x28, 0x0000 },
+- { 0x29, 0x0000 },
++ { 0x28, 0x007b },
++ { 0x29, 0x007b },
+ { 0x2a, 0x0040 },
+ { 0x2b, 0x0000 },
+ { 0x2c, 0x0000 },
+@@ -138,7 +139,15 @@ struct wm8960_priv {
+ struct wm8960_data pdata;
+ };
+
++#if 1
++#define wm8960_reset(c) do{ \
++ int i = 0;\
++ snd_soc_write(c, WM8960_RESET, 0);\
++ for(i = 0; i < 1000*HZ; i++);\
++ }while(0)
++#else
+ #define wm8960_reset(c) regmap_write(c, WM8960_RESET, 0)
++#endif
+
+ /* enumerated controls */
+ static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted",
+@@ -192,8 +201,8 @@ static int wm8960_get_deemph(struct snd_kcontrol *kcontrol,
+ struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
+ struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+
+- ucontrol->value.integer.value[0] = wm8960->deemph;
+- return 0;
++ //ucontrol->value.integer.value[0] = wm8960->deemph;
++ return wm8960->deemph;
+ }
+
+ static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
+@@ -211,6 +220,71 @@ static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
+ return wm8960_set_deemph(codec);
+ }
+
++static int wm8960_preinit(struct snd_soc_codec *codec)
++{
++ //printk("****** %s ******\n", __func__);
++ snd_soc_write(codec, WM8960_RESET, 0);
++ mdelay(500);
++
++ return 0;
++}
++
++static int wm8960_postinit(struct snd_soc_codec *codec)
++{
++ u32 data;
++ //printk("****** %s ******\n", __func__);
++ // In
++ data = snd_soc_read(codec, WM8960_POWER1);
++ snd_soc_write(codec, WM8960_POWER1, data|WM8960_PWR1_ADCL|WM8960_PWR1_ADCR|WM8960_PWR1_AINL |WM8960_PWR1_AINR|WM8960_PWR1_MICB);//0x19
++ data = snd_soc_read(codec, WM8960_ADDCTL1);
++ snd_soc_write(codec, WM8960_ADDCTL1, data|ADDITIONAL1_DATSEL(0x01));//0x17
++ snd_soc_write(codec, WM8960_LADC, LEFTGAIN_LDVU|LEFTGAIN_LDACVOL(0xc3));//0x15
++ snd_soc_write(codec, WM8960_RADC, LEFTGAIN_LDVU|LEFTGAIN_LDACVOL(0xc3));//0x16
++ snd_soc_write(codec, WM8960_LINPATH, 0x148);//0x20
++ snd_soc_write(codec, WM8960_RINPATH, 0x148);//0x21
++ snd_soc_write(codec, WM8960_POWER3, WM8960_PWR3_LMIC|WM8960_PWR3_RMIC);//0x2f
++
++ // Out
++ data = snd_soc_read(codec, WM8960_POWER2);
++ snd_soc_write(codec, WM8960_POWER2, data|WM8960_PWR2_DACL|WM8960_PWR2_DACR|WM8960_PWR2_LOUT1|WM8960_PWR2_ROUT1|WM8960_PWR2_SPKL|WM8960_PWR2_SPKR);//0x1a
++ mdelay(10);
++ snd_soc_write(codec, WM8960_IFACE2, 0x40);
++ snd_soc_write(codec, WM8960_LDAC, LEFTGAIN_LDVU|LEFTGAIN_LDACVOL(0xff));//0x0a
++ snd_soc_write(codec, WM8960_RDAC, RIGHTGAIN_RDVU|RIGHTGAIN_RDACVOL(0xff));//0x0b
++ snd_soc_write(codec, WM8960_LOUTMIX, 0x100);//0x22
++ snd_soc_write(codec, WM8960_ROUTMIX, 0x100);//0x25
++
++ data = snd_soc_read(codec, WM8960_POWER3);
++ snd_soc_write(codec, WM8960_POWER3, data|WM8960_PWR3_ROMIX|WM8960_PWR3_LOMIX);//0x2f
++
++ snd_soc_write(codec, WM8960_CLASSD1, 0xf7);//0x31
++ snd_soc_write(codec, WM8960_CLASSD3, 0xad);//0x33
++ snd_soc_write(codec, WM8960_DACCTL1, 0x000);//0x05
++
++ data = snd_soc_read(codec, WM8960_POWER1);
++ snd_soc_write(codec, WM8960_POWER1, data|0x1c0);//0x19
++
++
++ snd_soc_write(codec, WM8960_LOUT1, LOUT1_LO1VU|LOUT1_LO1ZC|LOUT1_LOUT1VOL(115));//0x02
++ snd_soc_write(codec, WM8960_ROUT1, ROUT1_RO1VU|ROUT1_RO1ZC|ROUT1_ROUT1VOL(115));//0x03
++
++ snd_soc_write(codec, WM8960_LINVOL, LINV_IPVU|LINV_LINVOL(110)); //LINV(0x00)=>0x12b
++ snd_soc_write(codec, WM8960_RINVOL, RINV_IPVU|RINV_RINVOL(110)); //LINV(0x01)=>0x12b
++
++ return 0;
++}
++
++static int wm8960_close(struct snd_soc_codec *codec)
++{
++ snd_soc_write(codec, WM8960_DACCTL1,0x8); //0x05->0x08
++ snd_soc_write(codec, WM8960_POWER1, 0x000); //0x19->0x000
++ mdelay(300);
++ snd_soc_write(codec, WM8960_POWER2, 0x000); //0x1a->0x000
++
++ return 0;
++}
++
++
+ static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1);
+ static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1725, 75, 0);
+ static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
+@@ -563,6 +637,7 @@ static int wm8960_set_dai_fmt(struct snd_soc_dai *codec_dai,
+
+ /* set iface */
+ snd_soc_write(codec, WM8960_IFACE1, iface);
++ wm8960_postinit(codec);
+ return 0;
+ }
+
+@@ -809,9 +884,10 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec,
+ ret = wm8960_configure_clocking(codec);
+ if (ret)
+ return ret;
+-
++#if 0
+ /* Set VMID to 2x50k */
+ snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80);
++#endif
+ break;
+
+ case SND_SOC_BIAS_ON:
+@@ -852,12 +928,16 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec,
+ /* Disable anti-pop features */
+ snd_soc_write(codec, WM8960_APOP1, WM8960_BUFIOEN);
+ }
+-
++#if 0
+ /* Set VMID to 2x250k */
+ snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x100);
++#endif
+ break;
+
+ case SND_SOC_BIAS_OFF:
++#if 1
++ wm8960_close(codec);
++#else
+ /* Enable anti-pop features */
+ snd_soc_write(codec, WM8960_APOP1,
+ WM8960_POBCTRL | WM8960_SOFT_ST |
+@@ -866,6 +946,7 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec,
+ /* Disable VMID and VREF, let them discharge */
+ snd_soc_write(codec, WM8960_POWER1, 0);
+ msleep(600);
++#endif
+ break;
+ }
+
+@@ -1101,10 +1182,15 @@ static int wm8960_set_pll(struct snd_soc_codec *codec,
+
+ if (pll_div.k) {
+ reg |= 0x20;
+-
++#if 1
+ snd_soc_write(codec, WM8960_PLL2, (pll_div.k >> 16) & 0xff);
+ snd_soc_write(codec, WM8960_PLL3, (pll_div.k >> 8) & 0xff);
+ snd_soc_write(codec, WM8960_PLL4, pll_div.k & 0xff);
++#else
++ snd_soc_write(codec, WM8960_PLL2, (pll_div.k >> 16) & 0xff);
++ snd_soc_write(codec, WM8960_PLL3, (pll_div.k >> 8) & 0xff);
++ snd_soc_write(codec, WM8960_PLL4, pll_div.k & 0xff);
++#endif
+ }
+ snd_soc_write(codec, WM8960_PLL1, reg);
+
+@@ -1150,7 +1236,11 @@ static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai,
+ snd_soc_write(codec, WM8960_PLL1, reg | div);
+ break;
+ case WM8960_DCLKDIV:
++#if 1
+ reg = snd_soc_read(codec, WM8960_CLOCK2) & 0x03f;
++#else
++ reg = snd_soc_read(codec, WM8960_CLOCK2) & 0x03f;
++#endif
+ snd_soc_write(codec, WM8960_CLOCK2, reg | div);
+ break;
+ case WM8960_TOCLKSEL:
+@@ -1285,7 +1375,7 @@ static int wm8960_i2c_probe(struct i2c_client *i2c,
+ {
+ struct wm8960_data *pdata = dev_get_platdata(&i2c->dev);
+ struct wm8960_priv *wm8960;
+- int ret;
++ int ret - 0;
+
+ wm8960 = devm_kzalloc(&i2c->dev, sizeof(struct wm8960_priv),
+ GFP_KERNEL);
+@@ -1307,11 +1397,7 @@ static int wm8960_i2c_probe(struct i2c_client *i2c,
+ else if (i2c->dev.of_node)
+ wm8960_set_pdata_from_of(i2c, &wm8960->pdata);
+
+- ret = wm8960_reset(wm8960->regmap);
+- if (ret != 0) {
+- dev_err(&i2c->dev, "Failed to issue reset\n");
+- return ret;
+- }
++ wm8960_reset(wm8960->regmap);
+
+ if (wm8960->pdata.shared_lrclk) {
+ ret = regmap_update_bits(wm8960->regmap, WM8960_ADDCTL2,
+diff --git a/sound/soc/codecs/wm8960.h b/sound/soc/codecs/wm8960.h
+index ab3220d..5205deb 100644
+--- a/sound/soc/codecs/wm8960.h
++++ b/sound/soc/codecs/wm8960.h
+@@ -111,4 +111,68 @@
+ #define WM8960_OPCLK_DIV_5_5 (4 << 0)
+ #define WM8960_OPCLK_DIV_6 (5 << 0)
+
++/*
++ * WM8960 Power management
++ */
++#define WM8960_PWR1_VMIDSEL_DISABLED (0 << 7)
++#define WM8960_PWR1_VMIDSEL_50K (1 << 7)
++#define WM8960_PWR1_VMIDSEL_250K (2 << 7)
++#define WM8960_PWR1_VMIDSEL_5K (3 << 7)
++#define WM8960_PWR1_VREF (1 << 6)
++#define WM8960_PWR1_AINL (1 << 5)
++#define WM8960_PWR1_AINR (1 << 4)
++#define WM8960_PWR1_ADCL (1 << 3)
++#define WM8960_PWR1_ADCR (1 << 2)
++#define WM8960_PWR1_MICB (1 << 1)
++#define WM8960_PWR1_DIGENB (1 << 0)
++
++#define WM8960_PWR2_DACL (1 << 8)
++#define WM8960_PWR2_DACR (1 << 7)
++//#define WM8960_PWR2_LOUT1 (1 << 6)
++//#define WM8960_PWR2_ROUT1 (1 << 5)
++#define WM8960_PWR2_SPKL (1 << 4)
++#define WM8960_PWR2_SPKR (1 << 3)
++//#define WM8960_PWR2_OUT3 (1 << 1)
++#define WM8960_PWR2_PLL_EN (1 << 0)
++
++#define WM8960_PWR3_LMIC (1 << 5)
++#define WM8960_PWR3_RMIC (1 << 4)
++#define WM8960_PWR3_LOMIX (1 << 3)
++#define WM8960_PWR3_ROMIX (1 << 2)
++
++#define LEFTGAIN 0x0a
++#define LEFTGAIN_LDVU (1 << 8)
++#define LEFTGAIN_LDACVOL(x) ((x) & 0xff)
++
++#define RIGHTGAIN 0x0b
++#define RIGHTGAIN_RDVU (1 << 8)
++#define RIGHTGAIN_RDACVOL(x) ((x) & 0xff)
++
++#define ADDITIONAL1_DATSEL(x) (((x) & 0x3) << 2)
++
++#define AINTFCE1_WL_32 (3 << 2)
++#define AINTFCE1_WL_24 (2 << 2)
++#define AINTFCE1_WL_20 (1 << 2)
++#define AINTFCE1_WL_16 (0 << 2)
++#define AINTFCE1_FORMAT_I2S (2 << 0)
++
++#define LOUT1_LO1VU (1 << 8)
++#define LOUT1_LO1ZC (1 << 7)
++#define LOUT1_LOUT1VOL(x) ((x) & 0x7f)
++
++#define ROUT1_RO1VU (1 << 8)
++#define ROUT1_RO1ZC (1 << 7)
++#define ROUT1_ROUT1VOL(x) ((x) & 0x7f)
++
++#define LINV_IPVU (1 << 8) /* FIXME */
++
++#define LINV_LINMUTE (1 << 7)
++#define LINV_LIZC (1 << 6)
++#define LINV_LINVOL(x) ((x) & 0x3f)
++
++#define RINV_IPVU (1 << 8) /* FIXME */
++#define RINV_RINMUTE (1 << 7)
++#define RINV_RIZC (1 << 6)
++#define RINV_RINVOL(x) ((x) & 0x3f)
++
+ #endif
+diff --git a/sound/soc/mtk/Kconfig b/sound/soc/mtk/Kconfig
+new file mode 100644
+index 0000000..26d2531
--- /dev/null
+++ b/sound/soc/mtk/Kconfig
@@ -0,0 +1,35 @@
@@ -64,6 +423,9 @@
+ tristate "MTK SoC I2S Support"
+ depends on SND_MT76XX_SOC
+
+diff --git a/sound/soc/mtk/Makefile b/sound/soc/mtk/Makefile
+new file mode 100644
+index 0000000..00b3dff
--- /dev/null
+++ b/sound/soc/mtk/Makefile
@@ -0,0 +1,39 @@
@@ -106,6 +468,9 @@
+
+
+
+diff --git a/sound/soc/mtk/i2c_wm8960.c b/sound/soc/mtk/i2c_wm8960.c
+new file mode 100644
+index 0000000..70f16e1
--- /dev/null
+++ b/sound/soc/mtk/i2c_wm8960.c
@@ -0,0 +1,492 @@
@@ -601,6 +966,9 @@
+MODULE_DESCRIPTION("WM8960 I2C client driver");
+MODULE_LICENSE("GPL");
+
+diff --git a/sound/soc/mtk/i2c_wm8960.h b/sound/soc/mtk/i2c_wm8960.h
+new file mode 100644
+index 0000000..c769345
--- /dev/null
+++ b/sound/soc/mtk/i2c_wm8960.h
@@ -0,0 +1,288 @@
@@ -892,6 +1260,9 @@
+void audiohw_bypass(void);
+
+#endif /* _WM875x_H */
+diff --git a/sound/soc/mtk/i2s_ctrl.c b/sound/soc/mtk/i2s_ctrl.c
+new file mode 100644
+index 0000000..05034b0
--- /dev/null
+++ b/sound/soc/mtk/i2s_ctrl.c
@@ -0,0 +1,3524 @@
@@ -4419,6 +4790,9 @@
+#else
+module_param (i2sdrv_major, int, 0);
+#endif
+diff --git a/sound/soc/mtk/i2s_ctrl.h b/sound/soc/mtk/i2s_ctrl.h
+new file mode 100644
+index 0000000..b762c9c
--- /dev/null
+++ b/sound/soc/mtk/i2s_ctrl.h
@@ -0,0 +1,523 @@
@@ -4945,6 +5319,713 @@
+
+#endif /* __RALINK_I2S_H_ */
+
+diff --git a/sound/soc/mtk/i2s_debug.c b/sound/soc/mtk/i2s_debug.c
+new file mode 100644
+index 0000000..9f61b14
+--- /dev/null
++++ b/sound/soc/mtk/i2s_debug.c
+@@ -0,0 +1,698 @@
++#include <linux/init.h>
++#include <linux/version.h>
++#include <linux/module.h>
++#include <linux/kernel.h> /* printk() */
++#include "i2s_ctrl.h"
++#include <linux/delay.h>
++#include <linux/jiffies.h>
++#include <linux/random.h>
++#include <linux/slab.h>
++#include <asm/uaccess.h> /* copy_from/to_user */
++
++#if defined(CONFIG_SND_RALINK_SOC)
++#include <sound/soc/mtk/mtk_audio_device.h>
++#endif
++
++#if defined(CONFIG_I2S_WM8750)
++#include "../codec/i2c_wm8750.h"
++#endif
++#if defined(CONFIG_I2S_WM8751)
++#include "../codec/i2c_wm8751.h"
++#endif
++#if defined(CONFIG_I2S_WM8960)
++#include "i2c_wm8960.h"
++#endif
++
++
++//#define INTERNAL_LOOPBACK_DEBUG
++
++extern unsigned long i2s_codec_12p288Mhz[11];
++extern unsigned long i2s_codec_12Mhz[11];
++#if defined(CONFIG_RALINK_MT7628) || defined(CONFIG_ARCH_MT7623)
++extern unsigned long i2s_inclk_int_16bit[13];
++extern unsigned long i2s_inclk_comp_16bit[13];
++extern unsigned long i2s_inclk_int_24bit[13];
++extern unsigned long i2s_inclk_comp_24bit[13];
++#else
++extern unsigned long i2s_inclk_int[11];
++extern unsigned long i2s_inclk_comp[11];
++#endif
++extern int i2s_pll_config_mt7621(unsigned long index);
++extern int i2s_pll_config_mt7623(unsigned long index);
++
++#if defined(CONFIG_I2S_WM8960) || defined(CONFIG_I2S_WM8750) || defined(CONFIG_I2S_WM8751)
++extern void audiohw_loopback(int fsel);
++extern void audiohw_bypass(void);
++extern int audiohw_set_lineout_vol(int Aout, int vol_l, int vol_r);
++extern int audiohw_set_linein_vol(int vol_l, int vol_r);
++#endif
++
++#if defined(CONFIG_I2S_WM8960)
++extern void audiohw_codec_exlbk(void);
++#endif
++
++unsigned long txbuffer[512] = {
++ 0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
++ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
++ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
++ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
++ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
++ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
++ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
++ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 1
++0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
++ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
++ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
++ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
++ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
++ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
++ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
++ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 2
++0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
++ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
++ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
++ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
++ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
++ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
++ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
++ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 3
++0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
++ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
++ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
++ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
++ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
++ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
++ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
++ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 4
++0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
++ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
++ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
++ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
++ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
++ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
++ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
++ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 5
++0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
++ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
++ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
++ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
++ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
++ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
++ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
++ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 6
++0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
++ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
++ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
++ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
++ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
++ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
++ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
++ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 7
++0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
++ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
++ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
++ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
++ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
++ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
++ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
++ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00 //round 8
++ };
++
++int i2s_debug_cmd(unsigned int cmd, unsigned long arg)
++{
++ unsigned long data, index;
++ unsigned long *pTable;
++ int i;
++
++ switch(cmd)
++ {
++ case I2S_DEBUG_CLKGEN:
++ MSG("I2S_DEBUG_CLKGEN\n");
++#if defined(CONFIG_RALINK_RT3052)
++ *(volatile unsigned long*)(0xB0000060) = 0x00000016;
++ *(volatile unsigned long*)(0xB0000030) = 0x00009E00;
++ *(volatile unsigned long*)(0xB0000A00) = 0xC0000040;
++#elif defined(CONFIG_RALINK_RT3350)
++ *(volatile unsigned long*)(0xB0000060) = 0x00000018;
++ *(volatile unsigned long*)(0xB000002C) = 0x00000100;
++ *(volatile unsigned long*)(0xB0000030) = 0x00009E00;
++ *(volatile unsigned long*)(0xB0000A00) = 0xC0000040;
++#elif defined(CONFIG_RALINK_RT3883)
++ *(volatile unsigned long*)(0xB0000060) = 0x00000018;
++ *(volatile unsigned long*)(0xB000002C) = 0x00003000;
++ *(volatile unsigned long*)(0xB0000A00) = 0xC1104040;
++ *(volatile unsigned long*)(0xB0000A24) = 0x00000027;
++ *(volatile unsigned long*)(0xB0000A20) = 0x80000020;
++#elif (defined(CONFIG_RALINK_RT3352)||defined(CONFIG_RALINK_RT5350)) || defined (CONFIG_RALINK_RT6855)
++ *(volatile unsigned long*)(0xB0000060) = 0x00000018;
++ *(volatile unsigned long*)(0xB000002C) = 0x00000300;
++ *(volatile unsigned long*)(0xB0000A00) = 0xC1104040;
++ *(volatile unsigned long*)(0xB0000A24) = 0x00000027;
++ *(volatile unsigned long*)(0xB0000A20) = 0x80000020;
++#elif defined(CONFIG_RALINK_RT6855A)
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x860) = 0x00008080;
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x82C) = 0x00000300;
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x00) = 0xC1104040;
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x24) = 0x00000027;
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x20) = 0x80000020;
++#else
++//#error "I2S debug mode not support this Chip"
++#endif
++ break;
++ case I2S_DEBUG_INLBK:
++ MSG("I2S_DEBUG_INLBK\n");
++#if defined(CONFIG_RALINK_MT7621)
++ switch(96000)
++ {
++ case 8000:
++ index = 0;
++ break;
++ case 11025:
++ index = 1;
++ break;
++ case 12000:
++ index = 2;
++ break;
++ case 16000:
++ index = 3;
++ break;
++ case 22050:
++ index = 4;
++ break;
++ case 24000:
++ index = 5;
++ break;
++ case 32000:
++ index = 6;
++ break;
++ case 44100:
++ index = 7;
++ break;
++ case 48000:
++ index = 8;
++ break;
++ case 88200:
++ index = 9;
++ break;
++ case 96000:
++ index = 10;
++ break;
++ case 192000:
++ index = 11;
++ break;
++ default:
++ index = 7;
++ }
++ i2s_pll_config_mt7621(index);
++#elif defined(CONFIG_ARCH_MT7623)
++ i2s_pll_config_mt7623(11);
++#endif
++
++
++#if defined(CONFIG_RALINK_RT3052)
++ break;
++#endif
++#if defined(CONFIG_RALINK_RT6855A)
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x834) |= 0x00020000;
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x834) &= 0xFFFDFFFF;
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x0) &= 0x7FFFFFFF; //Rest I2S to default vaule
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x860) |= 0x00008080;
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x82C) = 0x00000300;
++#elif defined(CONFIG_RALINK_MT7621)
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x34) |= 0x00020000;
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x34) &= 0xFFFDFFFF;
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x0) &= 0x7FFFFFFF; //Rest I2S to default vaule
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x60) = 0x00000010; //GPIO purpose selection
++#elif defined(CONFIG_RALINK_MT7628)
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x34) |= 0x00020000;
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x34) &= 0xFFFDFFFF;
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x0) &= 0x7FFFFFFF; //Rest I2S to default vaule
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x60) &= ~((0x3)<<6); //GPIO purpose selection /*FIXME*/
++#elif defined(CONFIG_ARCH_MT7623)
++ *(volatile unsigned long*)(0xFB000034) |= 0x00020000;
++ *(volatile unsigned long*)(0xFB000034) &= 0xFFFDFFFF;
++ *(volatile unsigned long*)(ETHDMASYS_I2S_BASE+0x0) &= 0x7FFFFFFF; //Rest I2S to default vaule
++
++ *(volatile unsigned long*)(0xF0005840) &= ~((0x7)<<12);
++ *(volatile unsigned long*)(0xF0005840) |= ((0x6)<<12);
++ *(volatile unsigned long*)(0xF0005840) &= ~((0x7)<<9);
++ *(volatile unsigned long*)(0xF0005840) |= ((0x6)<<9);
++ *(volatile unsigned long*)(0xF0005040) |= ((0x1)<<10);
++ *(volatile unsigned long*)(0xF0005040) |= ((0x1)<<9);
++
++ *(volatile unsigned long*)(0xF00057F0) &= ~((0x7)<<12);
++ *(volatile unsigned long*)(0xF00057F0) |= ((0x6)<<12);
++ *(volatile unsigned long*)(0xF0005030) |= ((0x1)<<1);
++
++ *(volatile unsigned long*)(0xF0005840) &= ~((0x7)<<6);
++ *(volatile unsigned long*)(0xF0005840) |= ((0x6)<<6);
++ *(volatile unsigned long*)(0xF0005040) &= ~((0x1)<<8);
++
++ *(volatile unsigned long*)(0xF00058F0) &= ~((0x7)<<3);
++ *(volatile unsigned long*)(0xF00058F0) |= ((0x6)<<3);
++ *(volatile unsigned long*)(0xF0005070) |= ((0x1)<<14);
++
++
++#else
++ *(volatile unsigned long*)(0xB0000034) |= 0x00020000;
++ *(volatile unsigned long*)(0xB0000034) &= 0xFFFDFFFF;
++ *(volatile unsigned long*)(0xB0000A00) &= 0x7FFFFFFF; //Rest I2S to default vaule
++ *(volatile unsigned long*)(0xB0000060) = 0x00000018;
++
++#if defined(CONFIG_RALINK_RT3883)
++ *(volatile unsigned long*)(0xB000002C) = 0x00003000;
++#elif defined(CONFIG_ARCH_MT7623)
++
++#else
++ *(volatile unsigned long*)(0xB000002C) = 0x00000300;
++#endif
++#endif
++#if defined(CONFIG_RALINK_MT7621)
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x18) = 0x80000000;
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x00) = 0xc1104040;
++
++ pTable = i2s_inclk_int;
++ data = pTable[index];
++ //*(volatile unsigned long*)(RALINK_I2S_BASE+0x24) = data;
++ i2s_outw(RALINK_I2S_BASE+0x24, data);
++
++ pTable = i2s_inclk_comp;
++ data = pTable[index];
++ //*(volatile unsigned long*)(RALINK_I2S_BASE+0x20) = data;
++ i2s_outw(RALINK_I2S_BASE+0x20, (data|0x80000000));
++#elif defined(CONFIG_RALINK_MT7628)
++ index =11; /* SR: 192k */
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x18) = 0x80000000;
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x00) = 0xc1104040;
++
++ pTable = i2s_inclk_int_16bit;
++ //pTable = i2s_inclk_int_24bit;
++ data = pTable[index];
++ //*(volatile unsigned long*)(RALINK_I2S_BASE+0x24) = data;
++ i2s_outw(RALINK_I2S_BASE+0x24, data);
++
++ pTable = i2s_inclk_comp_16bit;
++ //pTable = i2s_inclk_comp_24bit;
++ data = pTable[index];
++ //*(volatile unsigned long*)(RALINK_I2S_BASE+0x20) = data;
++ i2s_outw(RALINK_I2S_BASE+0x20, (data|0x80000000));
++ mdelay(5);
++#elif defined(CONFIG_ARCH_MT7623)
++ index = 11;
++ *(volatile unsigned long*)(I2S_I2SCFG1) = 0x80000000;
++ *(volatile unsigned long*)(I2S_I2SCFG) = 0xE1104040;
++ *(volatile unsigned long*)(ETHDMASYS_SYSCTL_BASE+0x30) |= 0x00020000;
++ *(volatile unsigned long*)(ETHDMASYS_SYSCTL_BASE+0x2c) |= 0x00000080;
++
++ pTable = i2s_inclk_int_16bit;
++ //pTable = i2s_inclk_int_24bit;
++ data = pTable[index];
++ i2s_outw(I2S_DIVINT_CFG, data);
++
++ pTable = i2s_inclk_comp_16bit;
++ //pTable = i2s_inclk_comp_24bit;
++ data = pTable[index];
++ i2s_outw(I2S_DIVCOMP_CFG, (data|0x80000000));
++ mdelay(5);
++#else
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x18) = 0x80000000;
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x00) = 0xC1104040;
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x24) = 0x00000006;
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x20) = 0x80000105;
++#endif
++ {
++ int count = 0;
++ int k=0;
++ int enable_cnt=0;
++ unsigned long param[4];
++ unsigned long data;
++ //unsigned long data_tmp;
++ unsigned long ff_status;
++ //unsigned long* txbuffer;
++#if 0
++ int j=0;
++ int temp = 0;
++#endif
++#if defined (INTERNAL_LOOPBACK_DEBUG)
++ int count2 = 0;
++#endif
++ memset(param, 0, 4*sizeof(unsigned long) );
++ copy_from_user(param, (unsigned long*)arg, sizeof(long)*2);
++#if 0
++ txbuffer = (unsigned long*)kcalloc(param[0], sizeof(unsigned long), GFP_KERNEL);
++ if(txbuffer == NULL)
++ return -1;
++#endif
++
++ //ff_status = *(volatile unsigned long*)(RALINK_I2S_BASE+0x0C);
++ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
++ printk("ff status=[0x%08X]\n",(u32)ff_status);
++
++#if 0
++ for(i = 0; i < param[0]; i++)
++ {
++ if (i==0)
++ {
++ txbuffer[i] = 0x555A555A;
++ printk("%d: 0x%8lx\n", i, txbuffer[i]);
++ }
++ else
++ {
++ #if LINUX_VERSION_CODE < KERNEL_VERSION(3,10,14)
++ srandom32(jiffies);
++ txbuffer[i] = random32()%(0x555A555A)+1;
++ //printk("%d: 0x%8x\n", i, txbuffer[i]);
++ #else
++ //TODO:do we need to implement random32()
++ txbuffer[i] = 0x01010101;
++ #endif
++ }
++ }
++#endif
++
++ for( i = 0 ; i < param[0] ; i ++ )
++ {
++ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
++ #if defined(CONFIG_RALINK_MT7628) || defined(CONFIG_ARCH_MT7623)
++ if((ff_status&0xFF) > 0)
++ #else
++ if((ff_status&0x0F) > 0)
++ #endif
++ {
++ *(volatile unsigned long*)(I2S_TX_FIFO_WREG) = txbuffer[i];
++ mdelay(1);
++ }
++ else
++ {
++ mdelay(1);
++ printk("[%d]NO TX FREE FIFO ST=[0x%08X]\n", i, (u32)ff_status);
++ continue;
++ }
++
++ //if(i >= 16)
++ {
++
++ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
++ #if defined(CONFIG_RALINK_MT7628)
++ if(((ff_status>>8)&0xFF) > 0)
++ #else
++ if(((ff_status>>4)&0x0F) > 0)
++ #endif
++ {
++ data = *(volatile unsigned long*)(I2S_RX_FIFO_RREG);
++ //data_tmp = *(volatile unsigned long*)(I2S_RX_FIFO_RREG);
++ //MSG("[0x%08X] vs [0x%08X]\n", (u32)data, (u32)data_tmp);
++ }
++ else
++ {
++ printk("*[%d]NO RX FREE FIFO ST=[0x%08X]\n", i, (u32)ff_status);
++ continue;
++ }
++
++ if (data == txbuffer[0])
++ {
++ k = i;
++ enable_cnt = 1;
++ }
++ if (enable_cnt==1)
++ {
++ if(data!= txbuffer[i-k])
++ {
++ MSG("[%d][0x%08X] vs [0x%08X]\n", (i-k), (u32)data, (u32)txbuffer[i-k]);
++ }
++ else
++ {
++ //MSG("**[%d][0x%08X] vs [0x%08X]\n" ,(i-k), (u32)data , (u32)txbuffer[i-k]);
++ count++;
++ data=0;
++ }
++ }
++
++ }
++ }
++#if 0
++ temp = i-k;
++ for (j=0; j<k; j++)
++ {
++
++ //ff_status = *(volatile unsigned long*)(RALINK_I2S_BASE+0x0C);
++ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
++ #if defined(CONFIG_RALINK_MT7628) || defined(CONFIG_ARCH_MT7623)
++ if(((ff_status>>8)&0xFF) > 0)
++ #else
++ if(((ff_status>>4)&0x0F) > 0)
++ #endif
++ {
++ //data = *(volatile unsigned long*)(RALINK_I2S_BASE+0x14);
++ data = *(volatile unsigned long*)(I2S_RX_FIFO_RREG);
++ }
++ else
++ {
++ printk("*NO RX FREE FIFO ST=[0x%08X]\n", (u32)ff_status);
++ continue;
++ }
++
++ if(data!= txbuffer[temp+j])
++ {
++ MSG("[%d][0x%08X] vs [0x%08X]\n", (temp+j), (u32)data, (u32)txbuffer[temp+j]);
++ }
++ else
++ {
++ //MSG("&&[%d][0x%08X] vs [0x%08X]\n" ,(temp+j), (u32)data , (u32)txbuffer[temp+j]);
++ count++;
++ data=0;
++ }
++ if ((temp+j)==128)
++ {
++ //ff_status = *(volatile unsigned long*)(RALINK_I2S_BASE+0x0C);
++ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
++ //printk("[%d]FIFO ST=[0x%08X]\n", (temp+j), (u32)ff_status);
++ }
++ }
++#endif
++
++#if defined (INTERNAL_LOOPBACK_DEBUG)
++ for( i = 0 ; i < param[0] ; i ++ )
++ {
++ //ff_status = *(volatile unsigned long*)(RALINK_I2S_BASE+0x0C);
++ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
++ #if defined(CONFIG_RALINK_MT7628)|| defined(CONFIG_ARCH_MT7623)
++ if((ff_status&0xFF) > 0)
++ #else
++ if((ff_status&0x0F) > 0)
++ #endif
++ {
++ //*(volatile unsigned long*)(RALINK_I2S_BASE+0x10) = txbuffer[i];
++ *(volatile unsigned long*)(I2S_TX_FIFO_WREG) = txbuffer[i];
++ mdelay(1);
++ }
++ else
++ {
++ mdelay(1);
++ printk("[%d]NO TX FREE FIFO ST=[0x%08X]\n", i, (u32)ff_status);
++ continue;
++ }
++
++ //if(i >= 16)
++ {
++
++ //ff_status = *(volatile unsigned long*)(RALINK_I2S_BASE+0x0C);
++ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
++ #if defined(CONFIG_RALINK_MT7628)|| defined(CONFIG_ARCH_MT7623)
++ if(((ff_status>>8)&0xFF) > 0)
++ #else
++ if(((ff_status>>4)&0x0F) > 0)
++ #endif
++ {
++ //data = *(volatile unsigned long*)(RALINK_I2S_BASE+0x14);
++ data = *(volatile unsigned long*)(I2S_RX_FIFO_RREG);
++ }
++ else
++ {
++ printk("*[%d]NO RX FREE FIFO ST=[0x%08X]\n", i, (u32)ff_status);
++ continue;
++ }
++
++ {
++ if(data!= txbuffer[i])
++ {
++ MSG("[%d][0x%08X] vs [0x%08X]\n", (i), (u32)data, (u32)txbuffer[i]);
++ }
++ else
++ {
++ MSG("**[%d][0x%08X] vs [0x%08X]\n" ,(i), (u32)data , (u32)txbuffer[i]);
++ count2++;
++ data=0;
++ }
++ }
++
++ }
++ }
++ printk("Pattern match done count2=%d.\n", count2);
++#endif
++ printk("Pattern match done count=%d.\n", count);
++
++ }
++#if defined(CONFIG_ARCH_MT7623)
++ *(volatile unsigned long*)(0xFB000034) |= 0x00020000;
++ *(volatile unsigned long*)(0xFB000034) &= 0xFFFDFFFF;
++ *(volatile unsigned long*)(ETHDMASYS_I2S_BASE+0x0) &= 0x7FFFFFFF; //Rest I2S to default vaule
++#endif
++
++#if !defined(CONFIG_RALINK_RT3052)
++ break;
++#endif
++ case I2S_DEBUG_EXLBK:
++ MSG("I2S_DEBUG_EXLBK\n");
++#if !defined(CONFIG_ARCH_MT7623)
++ switch(arg)
++ {
++ case 8000:
++ index = 0;
++ break;
++ case 11025:
++ index = 1;
++ break;
++ case 12000:
++ index = 2;
++ break;
++ case 16000:
++ index = 3;
++ break;
++ case 22050:
++ index = 4;
++ break;
++ case 24000:
++ index = 5;
++ break;
++ case 32000:
++ index = 6;
++ break;
++ case 44100:
++ index = 7;
++ break;
++ case 48000:
++ index = 8;
++ break;
++ case 88200:
++ index = 9;
++ break;
++ case 96000:
++ index = 10;
++ break;
++ default:
++ index = 7;
++ }
++#if defined(CONFIG_RALINK_RT3052)
++ break;
++#endif
++#if defined(CONFIG_RALINK_RT6855A)
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x860) = 0x00008080;
++ //*(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x82C) = 0x00000300;
++#else
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x60) = 0x00000018;
++#if defined(CONFIG_RALINK_RT3883)
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x2C) = 0x00003000;
++#else
++ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x2C) = 0x00000300;
++#endif
++#endif
++
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x18) = 0x40000000;
++ *(volatile unsigned long*)(RALINK_I2S_BASE+0x00) = 0x81104040;
++#if defined(CONFIG_RALINK_MT7628)
++ pTable = i2s_inclk_int_16bit;
++#else
++ pTable = i2s_inclk_int;
++#endif
++ data = (volatile unsigned long)(pTable[index]);
++ i2s_outw(I2S_DIVINT_CFG, data);
++#if defined(CONFIG_RALINK_MT7628)
++ pTable = i2s_inclk_comp_16bit;
++#else
++ pTable = i2s_inclk_comp;
++#endif
++ data = (volatile unsigned long)(pTable[index]);
++ data |= REGBIT(1, I2S_CLKDIV_EN);
++ i2s_outw(I2S_DIVCOMP_CFG, data);
++
++ #if defined(CONFIG_I2S_MCLK_12MHZ)
++ pTable = i2s_codec_12Mhz;
++ #if defined(CONFIG_I2S_WM8960)
++ data = pTable[index];
++ #else
++ data = pTable[index]|0x01;
++ #endif
++ #else
++ pTable = i2s_codec_12p288Mhz;
++ data = pTable[index];
++ #endif
++
++ #if defined(CONFIG_I2S_WM8960) || defined(CONFIG_I2S_WM8750) || defined(CONFIG_I2S_WM8751)
++ audiohw_preinit();
++ #endif
++
++
++ #if defined (CONFIG_I2S_WM8960)
++ audiohw_postinit(1, 1, 1, 1, 0); // for codec apll enable, 16 bit word length
++ #elif defined(CONFIG_I2S_WM8750) || defined(CONFIG_I2S_WM8751)
++ audiohw_postinit(1, 1, 1, 0); // for 16 bit word length
++ #endif
++
++
++ #if defined (CONFIG_I2S_WM8960)
++ audiohw_set_frequency(data, 1); // for codec apll enable
++ #elif defined(CONFIG_I2S_WM8750) || defined(CONFIG_I2S_WM8751)
++ audiohw_set_frequency(data|0x1);
++ #endif
++
++
++ #if defined(CONFIG_I2S_WM8960) || defined(CONFIG_I2S_WM8750) || defined(CONFIG_I2S_WM8751)
++ audiohw_set_lineout_vol(1, 100, 100);
++ audiohw_set_linein_vol(100, 100);
++ #endif
++
++
++ #if defined(CONFIG_I2S_TXRX)
++ //audiohw_loopback(data);
++ #endif
++ #if !defined(CONFIG_RALINK_RT3052)
++ break;
++ #endif
++#endif
++ case I2S_DEBUG_CODECBYPASS:
++ #if defined(CONFIG_I2S_TXRX)
++ #if defined(CONFIG_RALINK_MT7628)
++ data = i2s_inw(RALINK_SYSCTL_BASE+0x60);
++ //data &= ~(0x3<<4);
++ data &= ~(0x3<<6);
++ data &= ~(0x3<<16);
++ data &= ~(0x1<<14);
++ i2s_outw(RALINK_SYSCTL_BASE+0x60, data);
++
++ data = i2s_inw(RALINK_SYSCTL_BASE+0x2c);
++ data &= ~(0x07<<9);
++ i2s_outw(RALINK_SYSCTL_BASE+0x2c, data);
++ #endif
++
++ #if defined(CONFIG_I2S_WM8960) || defined(CONFIG_I2S_WM8750) || defined(CONFIG_I2S_WM8751)
++ audiohw_bypass(); /* did not work */
++ #endif
++ #endif
++ break;
++ case I2S_DEBUG_FMT:
++ break;
++ case I2S_DEBUG_RESET:
++ break;
++#if defined(CONFIG_I2S_WM8960)
++ case I2S_DEBUG_CODEC_EXLBK:
++ audiohw_codec_exlbk();
++ break;
++#endif
++ default:
++ MSG("Not support this debug cmd [%d]\n", cmd);
++ break;
++ }
++
++ return 0;
++}
+diff --git a/sound/soc/mtk/mt76xx_i2s.c b/sound/soc/mtk/mt76xx_i2s.c
+new file mode 100644
+index 0000000..7615b51
--- /dev/null
+++ b/sound/soc/mtk/mt76xx_i2s.c
@@ -0,0 +1,304 @@
@@ -5252,6 +6333,9 @@
+MODULE_DESCRIPTION("Stretch MT76xx I2S Interface");
+MODULE_LICENSE("GPL");
+#endif
+diff --git a/sound/soc/mtk/mt76xx_i2s.h b/sound/soc/mtk/mt76xx_i2s.h
+new file mode 100644
+index 0000000..9ae0e50
--- /dev/null
+++ b/sound/soc/mtk/mt76xx_i2s.h
@@ -0,0 +1,18 @@
@@ -5273,6 +6357,9 @@
+
+#include "i2s_ctrl.h"
+#endif /* MTK_I2S_H_ */
+diff --git a/sound/soc/mtk/mt76xx_machine.c b/sound/soc/mtk/mt76xx_machine.c
+new file mode 100644
+index 0000000..00d2145
--- /dev/null
+++ b/sound/soc/mtk/mt76xx_machine.c
@@ -0,0 +1,317 @@
@@ -5593,6 +6680,9 @@
+module_exit(mt76xx_machine_exit);
+//EXPORT_SYMBOL_GPL(mt76xx_soc_platform);
+MODULE_LICENSE("GPL");
+diff --git a/sound/soc/mtk/mt76xx_machine.h b/sound/soc/mtk/mt76xx_machine.h
+new file mode 100644
+index 0000000..79532b5
--- /dev/null
+++ b/sound/soc/mtk/mt76xx_machine.h
@@ -0,0 +1,21 @@
@@ -5617,6 +6707,9 @@
+#endif
+
+#endif /* MT76XX_MACHINE_H_ */
+diff --git a/sound/soc/mtk/mt76xx_pcm.c b/sound/soc/mtk/mt76xx_pcm.c
+new file mode 100644
+index 0000000..1100ee0
--- /dev/null
+++ b/sound/soc/mtk/mt76xx_pcm.c
@@ -0,0 +1,499 @@
@@ -6119,6 +7212,9 @@
+MODULE_DESCRIPTION("MTK APSoC I2S DMA driver");
+MODULE_LICENSE("GPL");
+
+diff --git a/sound/soc/mtk/ralink_gdma.c b/sound/soc/mtk/ralink_gdma.c
+new file mode 100644
+index 0000000..b385f05
--- /dev/null
+++ b/sound/soc/mtk/ralink_gdma.c
@@ -0,0 +1,918 @@
@@ -7040,6 +8136,9 @@
+MODULE_AUTHOR("Steven Liu <steven_liu@ralinktech.com.tw>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(MOD_VERSION);
+diff --git a/sound/soc/mtk/ralink_gdma.h b/sound/soc/mtk/ralink_gdma.h
+new file mode 100644
+index 0000000..95ce5f7
--- /dev/null
+++ b/sound/soc/mtk/ralink_gdma.h
@@ -0,0 +1,326 @@
@@ -7369,9 +8468,11 @@
+
+
+#endif
+diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
+index 6173d15..d9c52a7 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
-@@ -1851,7 +1851,8 @@ static int soc_probe(struct platform_dev
+@@ -1758,7 +1758,8 @@ static int soc_probe(struct platform_device *pdev)
/* Bodge while we unpick instantiation */
card->dev = &pdev->dev;
@@ -7381,1008 +8482,6 @@
}
static int soc_cleanup_card_resources(struct snd_soc_card *card)
---- /dev/null
-+++ b/sound/soc/mtk/i2s_debug.c
-@@ -0,0 +1,698 @@
-+#include <linux/init.h>
-+#include <linux/version.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h> /* printk() */
-+#include "i2s_ctrl.h"
-+#include <linux/delay.h>
-+#include <linux/jiffies.h>
-+#include <linux/random.h>
-+#include <linux/slab.h>
-+#include <asm/uaccess.h> /* copy_from/to_user */
-+
-+#if defined(CONFIG_SND_RALINK_SOC)
-+#include <sound/soc/mtk/mtk_audio_device.h>
-+#endif
-+
-+#if defined(CONFIG_I2S_WM8750)
-+#include "../codec/i2c_wm8750.h"
-+#endif
-+#if defined(CONFIG_I2S_WM8751)
-+#include "../codec/i2c_wm8751.h"
-+#endif
-+#if defined(CONFIG_I2S_WM8960)
-+#include "i2c_wm8960.h"
-+#endif
-+
-+
-+//#define INTERNAL_LOOPBACK_DEBUG
-+
-+extern unsigned long i2s_codec_12p288Mhz[11];
-+extern unsigned long i2s_codec_12Mhz[11];
-+#if defined(CONFIG_RALINK_MT7628) || defined(CONFIG_ARCH_MT7623)
-+extern unsigned long i2s_inclk_int_16bit[13];
-+extern unsigned long i2s_inclk_comp_16bit[13];
-+extern unsigned long i2s_inclk_int_24bit[13];
-+extern unsigned long i2s_inclk_comp_24bit[13];
-+#else
-+extern unsigned long i2s_inclk_int[11];
-+extern unsigned long i2s_inclk_comp[11];
-+#endif
-+extern int i2s_pll_config_mt7621(unsigned long index);
-+extern int i2s_pll_config_mt7623(unsigned long index);
-+
-+#if defined(CONFIG_I2S_WM8960) || defined(CONFIG_I2S_WM8750) || defined(CONFIG_I2S_WM8751)
-+extern void audiohw_loopback(int fsel);
-+extern void audiohw_bypass(void);
-+extern int audiohw_set_lineout_vol(int Aout, int vol_l, int vol_r);
-+extern int audiohw_set_linein_vol(int vol_l, int vol_r);
-+#endif
-+
-+#if defined(CONFIG_I2S_WM8960)
-+extern void audiohw_codec_exlbk(void);
-+#endif
-+
-+unsigned long txbuffer[512] = {
-+ 0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
-+ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
-+ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
-+ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
-+ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
-+ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
-+ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
-+ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 1
-+0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
-+ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
-+ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
-+ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
-+ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
-+ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
-+ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
-+ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 2
-+0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
-+ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
-+ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
-+ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
-+ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
-+ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
-+ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
-+ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 3
-+0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
-+ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
-+ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
-+ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
-+ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
-+ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
-+ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
-+ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 4
-+0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
-+ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
-+ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
-+ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
-+ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
-+ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
-+ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
-+ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 5
-+0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
-+ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
-+ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
-+ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
-+ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
-+ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
-+ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
-+ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 6
-+0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
-+ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
-+ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
-+ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
-+ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
-+ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
-+ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
-+ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00, //round 7
-+0x01020304, 0x05060708, 0x090a0b0c, 0x0d0e0f10, 0x11121314, 0x15161718, 0x191a1b1c, 0x1d1e1f20,
-+ 0x21222324, 0x25262728, 0x292a2b2c, 0x2d2e2f30, 0x31323334, 0x35363738, 0x393a3b3c, 0x3d3e3f40,
-+ 0x41424344, 0x45464748, 0x494a4b4c, 0x4d4e4f50, 0x51525354, 0x55565758, 0x595a5b5c, 0x5d5e5f60,
-+ 0x61626364, 0x65666768, 0x696a6b6c, 0x6d6e6f70, 0x71727374, 0x75767778, 0x797a7b7c, 0x7d7e7f80,
-+ 0x81828384, 0x85868788, 0x898a8b8c, 0x8d8e8f90, 0x91929394, 0x95969798, 0x999a9b9c, 0x9d9e9fa0,
-+ 0xa1a2a3a4, 0xa5a6a7a8, 0xa9aaabac, 0xadaeafb0, 0xb1b2b3b4, 0xb5b6b7b8, 0xb9babbbc, 0xbdbebfc0,
-+ 0xc1c2c3c4, 0xc5c6c7c8, 0xc9cacbcc, 0xcdcecfd0, 0xd1d2d3d4, 0xd5d6d7d8, 0xd9dadbdc, 0xdddedfe0,
-+ 0xe1e2e3e4, 0xe5e6e7e8, 0xe9eaebec, 0xedeeeff0, 0xf1f2f3f4, 0xf5f6f7f8, 0xf9fafbfc, 0xfdfeff00 //round 8
-+ };
-+
-+int i2s_debug_cmd(unsigned int cmd, unsigned long arg)
-+{
-+ unsigned long data, index;
-+ unsigned long *pTable;
-+ int i;
-+
-+ switch(cmd)
-+ {
-+ case I2S_DEBUG_CLKGEN:
-+ MSG("I2S_DEBUG_CLKGEN\n");
-+#if defined(CONFIG_RALINK_RT3052)
-+ *(volatile unsigned long*)(0xB0000060) = 0x00000016;
-+ *(volatile unsigned long*)(0xB0000030) = 0x00009E00;
-+ *(volatile unsigned long*)(0xB0000A00) = 0xC0000040;
-+#elif defined(CONFIG_RALINK_RT3350)
-+ *(volatile unsigned long*)(0xB0000060) = 0x00000018;
-+ *(volatile unsigned long*)(0xB000002C) = 0x00000100;
-+ *(volatile unsigned long*)(0xB0000030) = 0x00009E00;
-+ *(volatile unsigned long*)(0xB0000A00) = 0xC0000040;
-+#elif defined(CONFIG_RALINK_RT3883)
-+ *(volatile unsigned long*)(0xB0000060) = 0x00000018;
-+ *(volatile unsigned long*)(0xB000002C) = 0x00003000;
-+ *(volatile unsigned long*)(0xB0000A00) = 0xC1104040;
-+ *(volatile unsigned long*)(0xB0000A24) = 0x00000027;
-+ *(volatile unsigned long*)(0xB0000A20) = 0x80000020;
-+#elif (defined(CONFIG_RALINK_RT3352)||defined(CONFIG_RALINK_RT5350)) || defined (CONFIG_RALINK_RT6855)
-+ *(volatile unsigned long*)(0xB0000060) = 0x00000018;
-+ *(volatile unsigned long*)(0xB000002C) = 0x00000300;
-+ *(volatile unsigned long*)(0xB0000A00) = 0xC1104040;
-+ *(volatile unsigned long*)(0xB0000A24) = 0x00000027;
-+ *(volatile unsigned long*)(0xB0000A20) = 0x80000020;
-+#elif defined(CONFIG_RALINK_RT6855A)
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x860) = 0x00008080;
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x82C) = 0x00000300;
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x00) = 0xC1104040;
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x24) = 0x00000027;
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x20) = 0x80000020;
-+#else
-+//#error "I2S debug mode not support this Chip"
-+#endif
-+ break;
-+ case I2S_DEBUG_INLBK:
-+ MSG("I2S_DEBUG_INLBK\n");
-+#if defined(CONFIG_RALINK_MT7621)
-+ switch(96000)
-+ {
-+ case 8000:
-+ index = 0;
-+ break;
-+ case 11025:
-+ index = 1;
-+ break;
-+ case 12000:
-+ index = 2;
-+ break;
-+ case 16000:
-+ index = 3;
-+ break;
-+ case 22050:
-+ index = 4;
-+ break;
-+ case 24000:
-+ index = 5;
-+ break;
-+ case 32000:
-+ index = 6;
-+ break;
-+ case 44100:
-+ index = 7;
-+ break;
-+ case 48000:
-+ index = 8;
-+ break;
-+ case 88200:
-+ index = 9;
-+ break;
-+ case 96000:
-+ index = 10;
-+ break;
-+ case 192000:
-+ index = 11;
-+ break;
-+ default:
-+ index = 7;
-+ }
-+ i2s_pll_config_mt7621(index);
-+#elif defined(CONFIG_ARCH_MT7623)
-+ i2s_pll_config_mt7623(11);
-+#endif
-+
-+
-+#if defined(CONFIG_RALINK_RT3052)
-+ break;
-+#endif
-+#if defined(CONFIG_RALINK_RT6855A)
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x834) |= 0x00020000;
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x834) &= 0xFFFDFFFF;
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x0) &= 0x7FFFFFFF; //Rest I2S to default vaule
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x860) |= 0x00008080;
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x82C) = 0x00000300;
-+#elif defined(CONFIG_RALINK_MT7621)
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x34) |= 0x00020000;
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x34) &= 0xFFFDFFFF;
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x0) &= 0x7FFFFFFF; //Rest I2S to default vaule
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x60) = 0x00000010; //GPIO purpose selection
-+#elif defined(CONFIG_RALINK_MT7628)
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x34) |= 0x00020000;
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x34) &= 0xFFFDFFFF;
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x0) &= 0x7FFFFFFF; //Rest I2S to default vaule
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x60) &= ~((0x3)<<6); //GPIO purpose selection /*FIXME*/
-+#elif defined(CONFIG_ARCH_MT7623)
-+ *(volatile unsigned long*)(0xFB000034) |= 0x00020000;
-+ *(volatile unsigned long*)(0xFB000034) &= 0xFFFDFFFF;
-+ *(volatile unsigned long*)(ETHDMASYS_I2S_BASE+0x0) &= 0x7FFFFFFF; //Rest I2S to default vaule
-+
-+ *(volatile unsigned long*)(0xF0005840) &= ~((0x7)<<12);
-+ *(volatile unsigned long*)(0xF0005840) |= ((0x6)<<12);
-+ *(volatile unsigned long*)(0xF0005840) &= ~((0x7)<<9);
-+ *(volatile unsigned long*)(0xF0005840) |= ((0x6)<<9);
-+ *(volatile unsigned long*)(0xF0005040) |= ((0x1)<<10);
-+ *(volatile unsigned long*)(0xF0005040) |= ((0x1)<<9);
-+
-+ *(volatile unsigned long*)(0xF00057F0) &= ~((0x7)<<12);
-+ *(volatile unsigned long*)(0xF00057F0) |= ((0x6)<<12);
-+ *(volatile unsigned long*)(0xF0005030) |= ((0x1)<<1);
-+
-+ *(volatile unsigned long*)(0xF0005840) &= ~((0x7)<<6);
-+ *(volatile unsigned long*)(0xF0005840) |= ((0x6)<<6);
-+ *(volatile unsigned long*)(0xF0005040) &= ~((0x1)<<8);
-+
-+ *(volatile unsigned long*)(0xF00058F0) &= ~((0x7)<<3);
-+ *(volatile unsigned long*)(0xF00058F0) |= ((0x6)<<3);
-+ *(volatile unsigned long*)(0xF0005070) |= ((0x1)<<14);
-+
-+
-+#else
-+ *(volatile unsigned long*)(0xB0000034) |= 0x00020000;
-+ *(volatile unsigned long*)(0xB0000034) &= 0xFFFDFFFF;
-+ *(volatile unsigned long*)(0xB0000A00) &= 0x7FFFFFFF; //Rest I2S to default vaule
-+ *(volatile unsigned long*)(0xB0000060) = 0x00000018;
-+
-+#if defined(CONFIG_RALINK_RT3883)
-+ *(volatile unsigned long*)(0xB000002C) = 0x00003000;
-+#elif defined(CONFIG_ARCH_MT7623)
-+
-+#else
-+ *(volatile unsigned long*)(0xB000002C) = 0x00000300;
-+#endif
-+#endif
-+#if defined(CONFIG_RALINK_MT7621)
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x18) = 0x80000000;
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x00) = 0xc1104040;
-+
-+ pTable = i2s_inclk_int;
-+ data = pTable[index];
-+ //*(volatile unsigned long*)(RALINK_I2S_BASE+0x24) = data;
-+ i2s_outw(RALINK_I2S_BASE+0x24, data);
-+
-+ pTable = i2s_inclk_comp;
-+ data = pTable[index];
-+ //*(volatile unsigned long*)(RALINK_I2S_BASE+0x20) = data;
-+ i2s_outw(RALINK_I2S_BASE+0x20, (data|0x80000000));
-+#elif defined(CONFIG_RALINK_MT7628)
-+ index =11; /* SR: 192k */
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x18) = 0x80000000;
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x00) = 0xc1104040;
-+
-+ pTable = i2s_inclk_int_16bit;
-+ //pTable = i2s_inclk_int_24bit;
-+ data = pTable[index];
-+ //*(volatile unsigned long*)(RALINK_I2S_BASE+0x24) = data;
-+ i2s_outw(RALINK_I2S_BASE+0x24, data);
-+
-+ pTable = i2s_inclk_comp_16bit;
-+ //pTable = i2s_inclk_comp_24bit;
-+ data = pTable[index];
-+ //*(volatile unsigned long*)(RALINK_I2S_BASE+0x20) = data;
-+ i2s_outw(RALINK_I2S_BASE+0x20, (data|0x80000000));
-+ mdelay(5);
-+#elif defined(CONFIG_ARCH_MT7623)
-+ index = 11;
-+ *(volatile unsigned long*)(I2S_I2SCFG1) = 0x80000000;
-+ *(volatile unsigned long*)(I2S_I2SCFG) = 0xE1104040;
-+ *(volatile unsigned long*)(ETHDMASYS_SYSCTL_BASE+0x30) |= 0x00020000;
-+ *(volatile unsigned long*)(ETHDMASYS_SYSCTL_BASE+0x2c) |= 0x00000080;
-+
-+ pTable = i2s_inclk_int_16bit;
-+ //pTable = i2s_inclk_int_24bit;
-+ data = pTable[index];
-+ i2s_outw(I2S_DIVINT_CFG, data);
-+
-+ pTable = i2s_inclk_comp_16bit;
-+ //pTable = i2s_inclk_comp_24bit;
-+ data = pTable[index];
-+ i2s_outw(I2S_DIVCOMP_CFG, (data|0x80000000));
-+ mdelay(5);
-+#else
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x18) = 0x80000000;
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x00) = 0xC1104040;
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x24) = 0x00000006;
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x20) = 0x80000105;
-+#endif
-+ {
-+ int count = 0;
-+ int k=0;
-+ int enable_cnt=0;
-+ unsigned long param[4];
-+ unsigned long data;
-+ //unsigned long data_tmp;
-+ unsigned long ff_status;
-+ //unsigned long* txbuffer;
-+#if 0
-+ int j=0;
-+ int temp = 0;
-+#endif
-+#if defined (INTERNAL_LOOPBACK_DEBUG)
-+ int count2 = 0;
-+#endif
-+ memset(param, 0, 4*sizeof(unsigned long) );
-+ copy_from_user(param, (unsigned long*)arg, sizeof(long)*2);
-+#if 0
-+ txbuffer = (unsigned long*)kcalloc(param[0], sizeof(unsigned long), GFP_KERNEL);
-+ if(txbuffer == NULL)
-+ return -1;
-+#endif
-+
-+ //ff_status = *(volatile unsigned long*)(RALINK_I2S_BASE+0x0C);
-+ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
-+ printk("ff status=[0x%08X]\n",(u32)ff_status);
-+
-+#if 0
-+ for(i = 0; i < param[0]; i++)
-+ {
-+ if (i==0)
-+ {
-+ txbuffer[i] = 0x555A555A;
-+ printk("%d: 0x%8lx\n", i, txbuffer[i]);
-+ }
-+ else
-+ {
-+ #if LINUX_VERSION_CODE < KERNEL_VERSION(3,10,14)
-+ srandom32(jiffies);
-+ txbuffer[i] = random32()%(0x555A555A)+1;
-+ //printk("%d: 0x%8x\n", i, txbuffer[i]);
-+ #else
-+ //TODO:do we need to implement random32()
-+ txbuffer[i] = 0x01010101;
-+ #endif
-+ }
-+ }
-+#endif
-+
-+ for( i = 0 ; i < param[0] ; i ++ )
-+ {
-+ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
-+ #if defined(CONFIG_RALINK_MT7628) || defined(CONFIG_ARCH_MT7623)
-+ if((ff_status&0xFF) > 0)
-+ #else
-+ if((ff_status&0x0F) > 0)
-+ #endif
-+ {
-+ *(volatile unsigned long*)(I2S_TX_FIFO_WREG) = txbuffer[i];
-+ mdelay(1);
-+ }
-+ else
-+ {
-+ mdelay(1);
-+ printk("[%d]NO TX FREE FIFO ST=[0x%08X]\n", i, (u32)ff_status);
-+ continue;
-+ }
-+
-+ //if(i >= 16)
-+ {
-+
-+ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
-+ #if defined(CONFIG_RALINK_MT7628)
-+ if(((ff_status>>8)&0xFF) > 0)
-+ #else
-+ if(((ff_status>>4)&0x0F) > 0)
-+ #endif
-+ {
-+ data = *(volatile unsigned long*)(I2S_RX_FIFO_RREG);
-+ //data_tmp = *(volatile unsigned long*)(I2S_RX_FIFO_RREG);
-+ //MSG("[0x%08X] vs [0x%08X]\n", (u32)data, (u32)data_tmp);
-+ }
-+ else
-+ {
-+ printk("*[%d]NO RX FREE FIFO ST=[0x%08X]\n", i, (u32)ff_status);
-+ continue;
-+ }
-+
-+ if (data == txbuffer[0])
-+ {
-+ k = i;
-+ enable_cnt = 1;
-+ }
-+ if (enable_cnt==1)
-+ {
-+ if(data!= txbuffer[i-k])
-+ {
-+ MSG("[%d][0x%08X] vs [0x%08X]\n", (i-k), (u32)data, (u32)txbuffer[i-k]);
-+ }
-+ else
-+ {
-+ //MSG("**[%d][0x%08X] vs [0x%08X]\n" ,(i-k), (u32)data , (u32)txbuffer[i-k]);
-+ count++;
-+ data=0;
-+ }
-+ }
-+
-+ }
-+ }
-+#if 0
-+ temp = i-k;
-+ for (j=0; j<k; j++)
-+ {
-+
-+ //ff_status = *(volatile unsigned long*)(RALINK_I2S_BASE+0x0C);
-+ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
-+ #if defined(CONFIG_RALINK_MT7628) || defined(CONFIG_ARCH_MT7623)
-+ if(((ff_status>>8)&0xFF) > 0)
-+ #else
-+ if(((ff_status>>4)&0x0F) > 0)
-+ #endif
-+ {
-+ //data = *(volatile unsigned long*)(RALINK_I2S_BASE+0x14);
-+ data = *(volatile unsigned long*)(I2S_RX_FIFO_RREG);
-+ }
-+ else
-+ {
-+ printk("*NO RX FREE FIFO ST=[0x%08X]\n", (u32)ff_status);
-+ continue;
-+ }
-+
-+ if(data!= txbuffer[temp+j])
-+ {
-+ MSG("[%d][0x%08X] vs [0x%08X]\n", (temp+j), (u32)data, (u32)txbuffer[temp+j]);
-+ }
-+ else
-+ {
-+ //MSG("&&[%d][0x%08X] vs [0x%08X]\n" ,(temp+j), (u32)data , (u32)txbuffer[temp+j]);
-+ count++;
-+ data=0;
-+ }
-+ if ((temp+j)==128)
-+ {
-+ //ff_status = *(volatile unsigned long*)(RALINK_I2S_BASE+0x0C);
-+ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
-+ //printk("[%d]FIFO ST=[0x%08X]\n", (temp+j), (u32)ff_status);
-+ }
-+ }
-+#endif
-+
-+#if defined (INTERNAL_LOOPBACK_DEBUG)
-+ for( i = 0 ; i < param[0] ; i ++ )
-+ {
-+ //ff_status = *(volatile unsigned long*)(RALINK_I2S_BASE+0x0C);
-+ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
-+ #if defined(CONFIG_RALINK_MT7628)|| defined(CONFIG_ARCH_MT7623)
-+ if((ff_status&0xFF) > 0)
-+ #else
-+ if((ff_status&0x0F) > 0)
-+ #endif
-+ {
-+ //*(volatile unsigned long*)(RALINK_I2S_BASE+0x10) = txbuffer[i];
-+ *(volatile unsigned long*)(I2S_TX_FIFO_WREG) = txbuffer[i];
-+ mdelay(1);
-+ }
-+ else
-+ {
-+ mdelay(1);
-+ printk("[%d]NO TX FREE FIFO ST=[0x%08X]\n", i, (u32)ff_status);
-+ continue;
-+ }
-+
-+ //if(i >= 16)
-+ {
-+
-+ //ff_status = *(volatile unsigned long*)(RALINK_I2S_BASE+0x0C);
-+ ff_status = *(volatile unsigned long*)(I2S_FF_STATUS);
-+ #if defined(CONFIG_RALINK_MT7628)|| defined(CONFIG_ARCH_MT7623)
-+ if(((ff_status>>8)&0xFF) > 0)
-+ #else
-+ if(((ff_status>>4)&0x0F) > 0)
-+ #endif
-+ {
-+ //data = *(volatile unsigned long*)(RALINK_I2S_BASE+0x14);
-+ data = *(volatile unsigned long*)(I2S_RX_FIFO_RREG);
-+ }
-+ else
-+ {
-+ printk("*[%d]NO RX FREE FIFO ST=[0x%08X]\n", i, (u32)ff_status);
-+ continue;
-+ }
-+
-+ {
-+ if(data!= txbuffer[i])
-+ {
-+ MSG("[%d][0x%08X] vs [0x%08X]\n", (i), (u32)data, (u32)txbuffer[i]);
-+ }
-+ else
-+ {
-+ MSG("**[%d][0x%08X] vs [0x%08X]\n" ,(i), (u32)data , (u32)txbuffer[i]);
-+ count2++;
-+ data=0;
-+ }
-+ }
-+
-+ }
-+ }
-+ printk("Pattern match done count2=%d.\n", count2);
-+#endif
-+ printk("Pattern match done count=%d.\n", count);
-+
-+ }
-+#if defined(CONFIG_ARCH_MT7623)
-+ *(volatile unsigned long*)(0xFB000034) |= 0x00020000;
-+ *(volatile unsigned long*)(0xFB000034) &= 0xFFFDFFFF;
-+ *(volatile unsigned long*)(ETHDMASYS_I2S_BASE+0x0) &= 0x7FFFFFFF; //Rest I2S to default vaule
-+#endif
-+
-+#if !defined(CONFIG_RALINK_RT3052)
-+ break;
-+#endif
-+ case I2S_DEBUG_EXLBK:
-+ MSG("I2S_DEBUG_EXLBK\n");
-+#if !defined(CONFIG_ARCH_MT7623)
-+ switch(arg)
-+ {
-+ case 8000:
-+ index = 0;
-+ break;
-+ case 11025:
-+ index = 1;
-+ break;
-+ case 12000:
-+ index = 2;
-+ break;
-+ case 16000:
-+ index = 3;
-+ break;
-+ case 22050:
-+ index = 4;
-+ break;
-+ case 24000:
-+ index = 5;
-+ break;
-+ case 32000:
-+ index = 6;
-+ break;
-+ case 44100:
-+ index = 7;
-+ break;
-+ case 48000:
-+ index = 8;
-+ break;
-+ case 88200:
-+ index = 9;
-+ break;
-+ case 96000:
-+ index = 10;
-+ break;
-+ default:
-+ index = 7;
-+ }
-+#if defined(CONFIG_RALINK_RT3052)
-+ break;
-+#endif
-+#if defined(CONFIG_RALINK_RT6855A)
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x860) = 0x00008080;
-+ //*(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x82C) = 0x00000300;
-+#else
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x60) = 0x00000018;
-+#if defined(CONFIG_RALINK_RT3883)
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x2C) = 0x00003000;
-+#else
-+ *(volatile unsigned long*)(RALINK_SYSCTL_BASE+0x2C) = 0x00000300;
-+#endif
-+#endif
-+
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x18) = 0x40000000;
-+ *(volatile unsigned long*)(RALINK_I2S_BASE+0x00) = 0x81104040;
-+#if defined(CONFIG_RALINK_MT7628)
-+ pTable = i2s_inclk_int_16bit;
-+#else
-+ pTable = i2s_inclk_int;
-+#endif
-+ data = (volatile unsigned long)(pTable[index]);
-+ i2s_outw(I2S_DIVINT_CFG, data);
-+#if defined(CONFIG_RALINK_MT7628)
-+ pTable = i2s_inclk_comp_16bit;
-+#else
-+ pTable = i2s_inclk_comp;
-+#endif
-+ data = (volatile unsigned long)(pTable[index]);
-+ data |= REGBIT(1, I2S_CLKDIV_EN);
-+ i2s_outw(I2S_DIVCOMP_CFG, data);
-+
-+ #if defined(CONFIG_I2S_MCLK_12MHZ)
-+ pTable = i2s_codec_12Mhz;
-+ #if defined(CONFIG_I2S_WM8960)
-+ data = pTable[index];
-+ #else
-+ data = pTable[index]|0x01;
-+ #endif
-+ #else
-+ pTable = i2s_codec_12p288Mhz;
-+ data = pTable[index];
-+ #endif
-+
-+ #if defined(CONFIG_I2S_WM8960) || defined(CONFIG_I2S_WM8750) || defined(CONFIG_I2S_WM8751)
-+ audiohw_preinit();
-+ #endif
-+
-+
-+ #if defined (CONFIG_I2S_WM8960)
-+ audiohw_postinit(1, 1, 1, 1, 0); // for codec apll enable, 16 bit word length
-+ #elif defined(CONFIG_I2S_WM8750) || defined(CONFIG_I2S_WM8751)
-+ audiohw_postinit(1, 1, 1, 0); // for 16 bit word length
-+ #endif
-+
-+
-+ #if defined (CONFIG_I2S_WM8960)
-+ audiohw_set_frequency(data, 1); // for codec apll enable
-+ #elif defined(CONFIG_I2S_WM8750) || defined(CONFIG_I2S_WM8751)
-+ audiohw_set_frequency(data|0x1);
-+ #endif
-+
-+
-+ #if defined(CONFIG_I2S_WM8960) || defined(CONFIG_I2S_WM8750) || defined(CONFIG_I2S_WM8751)
-+ audiohw_set_lineout_vol(1, 100, 100);
-+ audiohw_set_linein_vol(100, 100);
-+ #endif
-+
-+
-+ #if defined(CONFIG_I2S_TXRX)
-+ //audiohw_loopback(data);
-+ #endif
-+ #if !defined(CONFIG_RALINK_RT3052)
-+ break;
-+ #endif
-+#endif
-+ case I2S_DEBUG_CODECBYPASS:
-+ #if defined(CONFIG_I2S_TXRX)
-+ #if defined(CONFIG_RALINK_MT7628)
-+ data = i2s_inw(RALINK_SYSCTL_BASE+0x60);
-+ //data &= ~(0x3<<4);
-+ data &= ~(0x3<<6);
-+ data &= ~(0x3<<16);
-+ data &= ~(0x1<<14);
-+ i2s_outw(RALINK_SYSCTL_BASE+0x60, data);
-+
-+ data = i2s_inw(RALINK_SYSCTL_BASE+0x2c);
-+ data &= ~(0x07<<9);
-+ i2s_outw(RALINK_SYSCTL_BASE+0x2c, data);
-+ #endif
-+
-+ #if defined(CONFIG_I2S_WM8960) || defined(CONFIG_I2S_WM8750) || defined(CONFIG_I2S_WM8751)
-+ audiohw_bypass(); /* did not work */
-+ #endif
-+ #endif
-+ break;
-+ case I2S_DEBUG_FMT:
-+ break;
-+ case I2S_DEBUG_RESET:
-+ break;
-+#if defined(CONFIG_I2S_WM8960)
-+ case I2S_DEBUG_CODEC_EXLBK:
-+ audiohw_codec_exlbk();
-+ break;
-+#endif
-+ default:
-+ MSG("Not support this debug cmd [%d]\n", cmd);
-+ break;
-+ }
-+
-+ return 0;
-+}
---- a/sound/soc/codecs/wm8960.c
-+++ b/sound/soc/codecs/wm8960.c
-@@ -26,6 +26,7 @@
- #include <sound/wm8960.h>
-
- #include "wm8960.h"
-+#include "../mtk/i2c_wm8960.h"
-
- /* R25 - Power 1 */
- #define WM8960_VMID_MASK 0x180
-@@ -53,10 +54,10 @@
- * using 2 wire for device control, so we cache them instead.
- */
- static const struct reg_default wm8960_reg_defaults[] = {
-- { 0x0, 0x00a7 },
-- { 0x1, 0x00a7 },
-- { 0x2, 0x0000 },
-- { 0x3, 0x0000 },
-+ { 0x0, 0x002b },
-+ { 0x1, 0x002b },
-+ { 0x2, 0x00ff },
-+ { 0x3, 0x00ff },
- { 0x4, 0x0000 },
- { 0x5, 0x0008 },
- { 0x6, 0x0000 },
-@@ -88,8 +89,8 @@ static const struct reg_default wm8960_r
- { 0x25, 0x0050 },
- { 0x26, 0x0000 },
- { 0x27, 0x0000 },
-- { 0x28, 0x0000 },
-- { 0x29, 0x0000 },
-+ { 0x28, 0x007b },
-+ { 0x29, 0x007b },
- { 0x2a, 0x0040 },
- { 0x2b, 0x0000 },
- { 0x2c, 0x0000 },
-@@ -127,8 +128,15 @@ struct wm8960_priv {
- int playback_fs;
- };
-
-+#if 1
-+#define wm8960_reset(c) do{ \
-+ int i = 0;\
-+ snd_soc_write(c, WM8960_RESET, 0);\
-+ for(i = 0; i < 1000*HZ; i++);\
-+ }while(0)
-+#else
- #define wm8960_reset(c) snd_soc_write(c, WM8960_RESET, 0)
--
-+#endif
- /* enumerated controls */
- static const char *wm8960_polarity[] = {"No Inversion", "Left Inverted",
- "Right Inverted", "Stereo Inversion"};
-@@ -181,8 +189,8 @@ static int wm8960_get_deemph(struct snd_
- struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol);
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
-
-- ucontrol->value.integer.value[0] = wm8960->deemph;
-- return 0;
-+ //ucontrol->value.integer.value[0] = wm8960->deemph;
-+ return wm8960->deemph;
- }
-
- static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
-@@ -200,6 +208,70 @@ static int wm8960_put_deemph(struct snd_
- return wm8960_set_deemph(codec);
- }
-
-+static int wm8960_preinit(struct snd_soc_codec *codec)
-+{
-+ //printk("****** %s ******\n", __func__);
-+ snd_soc_write(codec, WM8960_RESET, 0);
-+ mdelay(500);
-+
-+ return 0;
-+}
-+
-+static int wm8960_postinit(struct snd_soc_codec *codec)
-+{
-+ u32 data;
-+ //printk("****** %s ******\n", __func__);
-+ // In
-+ data = snd_soc_read(codec, WM8960_POWER1);
-+ snd_soc_write(codec, WM8960_POWER1, data|WM8960_PWR1_ADCL|WM8960_PWR1_ADCR|WM8960_PWR1_AINL |WM8960_PWR1_AINR|WM8960_PWR1_MICB);//0x19
-+ data = snd_soc_read(codec, WM8960_ADDCTL1);
-+ snd_soc_write(codec, WM8960_ADDCTL1, data|ADDITIONAL1_DATSEL(0x01));//0x17
-+ snd_soc_write(codec, WM8960_LADC, LEFTGAIN_LDVU|LEFTGAIN_LDACVOL(0xc3));//0x15
-+ snd_soc_write(codec, WM8960_RADC, LEFTGAIN_LDVU|LEFTGAIN_LDACVOL(0xc3));//0x16
-+ snd_soc_write(codec, WM8960_LINPATH, 0x148);//0x20
-+ snd_soc_write(codec, WM8960_RINPATH, 0x148);//0x21
-+ snd_soc_write(codec, WM8960_POWER3, WM8960_PWR3_LMIC|WM8960_PWR3_RMIC);//0x2f
-+
-+ // Out
-+ data = snd_soc_read(codec, WM8960_POWER2);
-+ snd_soc_write(codec, WM8960_POWER2, data|WM8960_PWR2_DACL|WM8960_PWR2_DACR|WM8960_PWR2_LOUT1|WM8960_PWR2_ROUT1|WM8960_PWR2_SPKL|WM8960_PWR2_SPKR);//0x1a
-+ mdelay(10);
-+ snd_soc_write(codec, WM8960_IFACE2, 0x40);
-+ snd_soc_write(codec, WM8960_LDAC, LEFTGAIN_LDVU|LEFTGAIN_LDACVOL(0xff));//0x0a
-+ snd_soc_write(codec, WM8960_RDAC, RIGHTGAIN_RDVU|RIGHTGAIN_RDACVOL(0xff));//0x0b
-+ snd_soc_write(codec, WM8960_LOUTMIX, 0x100);//0x22
-+ snd_soc_write(codec, WM8960_ROUTMIX, 0x100);//0x25
-+
-+ data = snd_soc_read(codec, WM8960_POWER3);
-+ snd_soc_write(codec, WM8960_POWER3, data|WM8960_PWR3_ROMIX|WM8960_PWR3_LOMIX);//0x2f
-+
-+ snd_soc_write(codec, WM8960_CLASSD1, 0xf7);//0x31
-+ snd_soc_write(codec, WM8960_CLASSD3, 0xad);//0x33
-+ snd_soc_write(codec, WM8960_DACCTL1, 0x000);//0x05
-+
-+ data = snd_soc_read(codec, WM8960_POWER1);
-+ snd_soc_write(codec, WM8960_POWER1, data|0x1c0);//0x19
-+
-+
-+ snd_soc_write(codec, WM8960_LOUT1, LOUT1_LO1VU|LOUT1_LO1ZC|LOUT1_LOUT1VOL(115));//0x02
-+ snd_soc_write(codec, WM8960_ROUT1, ROUT1_RO1VU|ROUT1_RO1ZC|ROUT1_ROUT1VOL(115));//0x03
-+
-+ snd_soc_write(codec, WM8960_LINVOL, LINV_IPVU|LINV_LINVOL(110)); //LINV(0x00)=>0x12b
-+ snd_soc_write(codec, WM8960_RINVOL, RINV_IPVU|RINV_RINVOL(110)); //LINV(0x01)=>0x12b
-+
-+ return 0;
-+}
-+
-+static int wm8960_close(struct snd_soc_codec *codec)
-+{
-+ snd_soc_write(codec, WM8960_DACCTL1,0x8); //0x05->0x08
-+ snd_soc_write(codec, WM8960_POWER1, 0x000); //0x19->0x000
-+ mdelay(300);
-+ snd_soc_write(codec, WM8960_POWER2, 0x000); //0x1a->0x000
-+
-+ return 0;
-+}
-+
- static const DECLARE_TLV_DB_SCALE(adc_tlv, -9700, 50, 0);
- static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 1);
- static const DECLARE_TLV_DB_SCALE(bypass_tlv, -2100, 300, 0);
-@@ -542,6 +614,7 @@ static int wm8960_set_dai_fmt(struct snd
-
- /* set iface */
- snd_soc_write(codec, WM8960_IFACE1, iface);
-+ wm8960_postinit(codec);
- return 0;
- }
-
-@@ -623,11 +696,16 @@ static int wm8960_set_bias_level_out3(st
- break;
-
- case SND_SOC_BIAS_PREPARE:
-+#if 0
- /* Set VMID to 2x50k */
- snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80);
-+#endif
- break;
-
- case SND_SOC_BIAS_STANDBY:
-+#if 1
-+ wm8960_preinit(codec);
-+#else
- if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
- regcache_sync(wm8960->regmap);
-
-@@ -650,9 +728,13 @@ static int wm8960_set_bias_level_out3(st
-
- /* Set VMID to 2x250k */
- snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x100);
-+#endif
- break;
-
- case SND_SOC_BIAS_OFF:
-+#if 1
-+ wm8960_close(codec);
-+#else
- /* Enable anti-pop features */
- snd_soc_write(codec, WM8960_APOP1,
- WM8960_POBCTRL | WM8960_SOFT_ST |
-@@ -661,6 +743,7 @@ static int wm8960_set_bias_level_out3(st
- /* Disable VMID and VREF, let them discharge */
- snd_soc_write(codec, WM8960_POWER1, 0);
- msleep(600);
-+#endif
- break;
- }
-
-@@ -853,10 +936,15 @@ static int wm8960_set_dai_pll(struct snd
-
- if (pll_div.k) {
- reg |= 0x20;
--
-+#if 1
- snd_soc_write(codec, WM8960_PLL2, (pll_div.k >> 16) & 0xff);
- snd_soc_write(codec, WM8960_PLL3, (pll_div.k >> 8) & 0xff);
- snd_soc_write(codec, WM8960_PLL4, pll_div.k & 0xff);
-+#else
-+ snd_soc_write(codec, WM8960_PLL2, (pll_div.k >> 16) & 0xff);
-+ snd_soc_write(codec, WM8960_PLL3, (pll_div.k >> 8) & 0xff);
-+ snd_soc_write(codec, WM8960_PLL4, pll_div.k & 0xff);
-+#endif
- }
- snd_soc_write(codec, WM8960_PLL1, reg);
-
-@@ -888,7 +976,11 @@ static int wm8960_set_dai_clkdiv(struct
- snd_soc_write(codec, WM8960_PLL1, reg | div);
- break;
- case WM8960_DCLKDIV:
-+#if 1
- reg = snd_soc_read(codec, WM8960_CLOCK2) & 0x03f;
-+#else
-+ reg = snd_soc_read(codec, WM8960_CLOCK2) & 0x03f;
-+#endif
- snd_soc_write(codec, WM8960_CLOCK2, reg | div);
- break;
- case WM8960_TOCLKSEL:
-@@ -962,7 +1054,7 @@ static int wm8960_probe(struct snd_soc_c
- {
- struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
- struct wm8960_data *pdata = dev_get_platdata(codec->dev);
-- int ret;
-+ int ret = 0;
-
- wm8960->set_bias_level = wm8960_set_bias_level_out3;
-
-@@ -973,11 +1065,7 @@ static int wm8960_probe(struct snd_soc_c
- wm8960->set_bias_level = wm8960_set_bias_level_capless;
- }
-
-- ret = wm8960_reset(codec);
-- if (ret < 0) {
-- dev_err(codec->dev, "Failed to issue reset\n");
-- return ret;
-- }
-+ wm8960_reset(codec);
-
- wm8960->set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
---- a/sound/soc/codecs/wm8960.h
-+++ b/sound/soc/codecs/wm8960.h
-@@ -110,4 +110,68 @@
- #define WM8960_OPCLK_DIV_5_5 (4 << 0)
- #define WM8960_OPCLK_DIV_6 (5 << 0)
-
-+/*
-+ * WM8960 Power management
-+ */
-+#define WM8960_PWR1_VMIDSEL_DISABLED (0 << 7)
-+#define WM8960_PWR1_VMIDSEL_50K (1 << 7)
-+#define WM8960_PWR1_VMIDSEL_250K (2 << 7)
-+#define WM8960_PWR1_VMIDSEL_5K (3 << 7)
-+#define WM8960_PWR1_VREF (1 << 6)
-+#define WM8960_PWR1_AINL (1 << 5)
-+#define WM8960_PWR1_AINR (1 << 4)
-+#define WM8960_PWR1_ADCL (1 << 3)
-+#define WM8960_PWR1_ADCR (1 << 2)
-+#define WM8960_PWR1_MICB (1 << 1)
-+#define WM8960_PWR1_DIGENB (1 << 0)
-+
-+#define WM8960_PWR2_DACL (1 << 8)
-+#define WM8960_PWR2_DACR (1 << 7)
-+//#define WM8960_PWR2_LOUT1 (1 << 6)
-+//#define WM8960_PWR2_ROUT1 (1 << 5)
-+#define WM8960_PWR2_SPKL (1 << 4)
-+#define WM8960_PWR2_SPKR (1 << 3)
-+//#define WM8960_PWR2_OUT3 (1 << 1)
-+#define WM8960_PWR2_PLL_EN (1 << 0)
-+
-+#define WM8960_PWR3_LMIC (1 << 5)
-+#define WM8960_PWR3_RMIC (1 << 4)
-+#define WM8960_PWR3_LOMIX (1 << 3)
-+#define WM8960_PWR3_ROMIX (1 << 2)
-+
-+#define LEFTGAIN 0x0a
-+#define LEFTGAIN_LDVU (1 << 8)
-+#define LEFTGAIN_LDACVOL(x) ((x) & 0xff)
-+
-+#define RIGHTGAIN 0x0b
-+#define RIGHTGAIN_RDVU (1 << 8)
-+#define RIGHTGAIN_RDACVOL(x) ((x) & 0xff)
-+
-+#define ADDITIONAL1_DATSEL(x) (((x) & 0x3) << 2)
-+
-+#define AINTFCE1_WL_32 (3 << 2)
-+#define AINTFCE1_WL_24 (2 << 2)
-+#define AINTFCE1_WL_20 (1 << 2)
-+#define AINTFCE1_WL_16 (0 << 2)
-+#define AINTFCE1_FORMAT_I2S (2 << 0)
-+
-+#define LOUT1_LO1VU (1 << 8)
-+#define LOUT1_LO1ZC (1 << 7)
-+#define LOUT1_LOUT1VOL(x) ((x) & 0x7f)
-+
-+#define ROUT1_RO1VU (1 << 8)
-+#define ROUT1_RO1ZC (1 << 7)
-+#define ROUT1_ROUT1VOL(x) ((x) & 0x7f)
-+
-+#define LINV_IPVU (1 << 8) /* FIXME */
-+
-+#define LINV_LINMUTE (1 << 7)
-+#define LINV_LIZC (1 << 6)
-+#define LINV_LINVOL(x) ((x) & 0x3f)
-+
-+#define RINV_IPVU (1 << 8) /* FIXME */
-+#define RINV_RINMUTE (1 << 7)
-+#define RINV_RIZC (1 << 6)
-+#define RINV_RINVOL(x) ((x) & 0x3f)
-+
- #endif
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0051-serial-add-ugly-custom-baud-rate-hack.patch b/target/linux/ramips/patches-4.3/0051-serial-add-ugly-custom-baud-rate-hack.patch
new file mode 100644
index 0000000000..361b8d718a
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0051-serial-add-ugly-custom-baud-rate-hack.patch
@@ -0,0 +1,27 @@
+From a7eb46e0ea4a11e4dfb56ab129bf816d1059a6c5 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:31:08 +0100
+Subject: [PATCH 51/53] serial: add ugly custom baud rate hack
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/tty/serial/serial_core.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
+index 603d2cc..4020e07 100644
+--- a/drivers/tty/serial/serial_core.c
++++ b/drivers/tty/serial/serial_core.c
+@@ -359,6 +359,9 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
+ break;
+ }
+
++ if (tty_termios_baud_rate(termios) == 2500000)
++ return 250000;
++
+ for (try = 0; try < 2; try++) {
+ baud = tty_termios_baud_rate(termios);
+
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-3.18/0065-mt7628-pww.patch b/target/linux/ramips/patches-4.3/0052-pwm-add-mediatek-support.patch
index dc2ca95e4d..caaf84aab3 100644
--- a/target/linux/ramips/patches-3.18/0065-mt7628-pww.patch
+++ b/target/linux/ramips/patches-4.3/0052-pwm-add-mediatek-support.patch
@@ -1,6 +1,21 @@
+From fc8f96309c21c1bc3276427309cd7d361347d66e Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 17:16:50 +0100
+Subject: [PATCH 52/53] pwm: add mediatek support
+
+Signed-off-by: John Crispin <blogic@openwrt.org>
+---
+ drivers/pwm/Kconfig | 9 +++
+ drivers/pwm/Makefile | 1 +
+ drivers/pwm/pwm-mediatek.c | 173 ++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 183 insertions(+)
+ create mode 100644 drivers/pwm/pwm-mediatek.c
+
+diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
+index 062630a..76974ea 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
-@@ -177,6 +177,15 @@ config PWM_LPSS_PLATFORM
+@@ -230,6 +230,15 @@ config PWM_LPSS_PLATFORM
To compile this driver as a module, choose M here: the module
will be called pwm-lpss-platform.
@@ -16,9 +31,11 @@
config PWM_MXS
tristate "Freescale MXS PWM support"
depends on ARCH_MXS && OF
+diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
+index a0e00c0..aa0bd2e 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx
+@@ -20,6 +20,7 @@ obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o
obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o
obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o
obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
@@ -26,6 +43,9 @@
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o
+diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
+new file mode 100644
+index 0000000..f9d8ed4
--- /dev/null
+++ b/drivers/pwm/pwm-mediatek.c
@@ -0,0 +1,173 @@
@@ -202,3 +222,6 @@
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_ALIAS("platform:mtk-pwm");
+--
+1.7.10.4
+
diff --git a/target/linux/ramips/patches-4.3/0053-gic.patch b/target/linux/ramips/patches-4.3/0053-gic.patch
new file mode 100644
index 0000000000..c20cedf48e
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0053-gic.patch
@@ -0,0 +1,305 @@
+From 7b042645c1bd6407b1f7d9aa5785868e7e14b860 Mon Sep 17 00:00:00 2001
+From: John Crispin <blogic@openwrt.org>
+Date: Mon, 7 Dec 2015 18:40:16 +0100
+Subject: [PATCH 53/53] gic
+
+---
+ arch/mips/ralink/Kconfig | 1 +
+ arch/mips/ralink/Makefile | 2 +-
+ arch/mips/ralink/irq-gic.c | 212 ++------------------------------------------
+ 3 files changed, 11 insertions(+), 204 deletions(-)
+
+--- a/arch/mips/ralink/Kconfig
++++ b/arch/mips/ralink/Kconfig
+@@ -51,9 +51,9 @@
+ select SYS_SUPPORTS_MULTITHREADING
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_MIPS_CMP
++ select MIPS_GIC
+ select IRQ_GIC
+ select HW_HAS_PCI
+-
+ endchoice
+
+ choice
+--- a/arch/mips/ralink/Makefile
++++ b/arch/mips/ralink/Makefile
+@@ -13,7 +13,7 @@
+ obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o
+
+ obj-$(CONFIG_IRQ_INTC) += irq.o
+-obj-$(CONFIG_IRQ_GIC) += irq-gic.o
++obj-$(CONFIG_MIPS_GIC_IPI) += irq-gic.o
+ obj-$(CONFIG_MIPS_MT_SMP) += malta-amon.o
+
+ obj-$(CONFIG_SOC_RT288X) += rt288x.o
+--- a/arch/mips/ralink/irq-gic.c
++++ b/arch/mips/ralink/irq-gic.c
+@@ -16,248 +16,22 @@
+ #include <asm/irq.h>
+ #include <asm/setup.h>
+
+-#include <asm/gic.h>
++#include <asm/mips-cm.h>
++#include <linux/irqchip/mips-gic.h>
+
+ #include <asm/mach-ralink/mt7621.h>
+-#define GIC_BASE_ADDR 0x1fbc0000
+
+-unsigned long _gcmp_base;
+-static int gic_resched_int_base = 56;
+-static int gic_call_int_base = 60;
+-static struct irq_chip *irq_gic;
+-static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS];
+-
+-#if defined(CONFIG_MIPS_MT_SMP)
+-static int gic_resched_int_base;
+-static int gic_call_int_base;
++extern int __init gic_of_init(struct device_node *node,
++ struct device_node *parent);
+
+-#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu))
+-#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu))
+-
+-static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
+-{
+- scheduler_ipi();
+-
+- return IRQ_HANDLED;
+-}
+-
+-static irqreturn_t
+-ipi_call_interrupt(int irq, void *dev_id)
+-{
+- smp_call_function_interrupt();
+-
+- return IRQ_HANDLED;
+-}
+-
+-static struct irqaction irq_resched = {
+- .handler = ipi_resched_interrupt,
+- .flags = IRQF_DISABLED|IRQF_PERCPU,
+- .name = "ipi resched"
+-};
+-
+-static struct irqaction irq_call = {
+- .handler = ipi_call_interrupt,
+- .flags = IRQF_DISABLED|IRQF_PERCPU,
+- .name = "ipi call"
+-};
+-
+-#endif
+-
+-static void __init
+-gic_fill_map(void)
+-{
+- int i;
+-
+- for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
+- gic_intr_map[i].cpunum = 0;
+- gic_intr_map[i].pin = GIC_CPU_INT0;
+- gic_intr_map[i].polarity = GIC_POL_POS;
+- gic_intr_map[i].trigtype = GIC_TRIG_LEVEL;
+- gic_intr_map[i].flags = 0;
+- }
+-
+-#if defined(CONFIG_MIPS_MT_SMP)
+- {
+- int cpu;
+-
+- gic_call_int_base = ARRAY_SIZE(gic_intr_map) - nr_cpu_ids;
+- gic_resched_int_base = gic_call_int_base - nr_cpu_ids;
+-
+- i = gic_resched_int_base;
+-
+- for (cpu = 0; cpu < nr_cpu_ids; cpu++) {
+- gic_intr_map[i + cpu].cpunum = cpu;
+- gic_intr_map[i + cpu].pin = GIC_CPU_INT1;
+- gic_intr_map[i + cpu].trigtype = GIC_TRIG_EDGE;
+-
+- gic_intr_map[i + cpu + nr_cpu_ids].cpunum = cpu;
+- gic_intr_map[i + cpu + nr_cpu_ids].pin = GIC_CPU_INT2;
+- gic_intr_map[i + cpu + nr_cpu_ids].trigtype = GIC_TRIG_EDGE;
+- }
+- }
+-#endif
+-}
+-
+-void
+-gic_irq_ack(struct irq_data *d)
+-{
+- int irq = (d->irq - gic_irq_base);
+-
+- GIC_CLR_INTR_MASK(irq);
+-
+- if (gic_irq_flags[irq] & GIC_TRIG_EDGE)
+- GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq);
+-}
+-
+-void
+-gic_finish_irq(struct irq_data *d)
+-{
+- GIC_SET_INTR_MASK(d->irq - gic_irq_base);
+-}
+-
+-void __init
+-gic_platform_init(int irqs, struct irq_chip *irq_controller)
+-{
+- irq_gic = irq_controller;
+-}
+-
+-static void
+-gic_irqdispatch(void)
+-{
+- unsigned int irq = gic_get_int();
+-
+- if (likely(irq < GIC_NUM_INTRS))
+- do_IRQ(MIPS_GIC_IRQ_BASE + irq);
+- else {
+- pr_debug("Spurious GIC Interrupt!\n");
+- spurious_interrupt();
+- }
+-
+-}
+-
+-static void
+-vi_timer_irqdispatch(void)
+-{
+- do_IRQ(cp0_compare_irq);
+-}
+-
+-#if defined(CONFIG_MIPS_MT_SMP)
+-unsigned int
+-plat_ipi_call_int_xlate(unsigned int cpu)
+-{
+- return GIC_CALL_INT(cpu);
+-}
+-
+-unsigned int
+-plat_ipi_resched_int_xlate(unsigned int cpu)
+-{
+- return GIC_RESCHED_INT(cpu);
+-}
+-#endif
+-
+-asmlinkage void
+-plat_irq_dispatch(void)
+-{
+- unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+-
+- if (unlikely(!pending)) {
+- pr_err("Spurious CP0 Interrupt!\n");
+- spurious_interrupt();
+- } else {
+- if (pending & CAUSEF_IP7)
+- do_IRQ(cp0_compare_irq);
+-
+- if (pending & (CAUSEF_IP4 | CAUSEF_IP3 | CAUSEF_IP2))
+- gic_irqdispatch();
+- }
+-}
+-
+-unsigned int __cpuinit
+-get_c0_compare_int(void)
+-{
+- return CP0_LEGACY_COMPARE_IRQ;
+-}
+-
+-static int
+-gic_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+-{
+- irq_set_chip_and_handler(irq, irq_gic,
+-#if defined(CONFIG_MIPS_MT_SMP)
+- (hw >= gic_resched_int_base) ?
+- handle_percpu_irq :
+-#endif
+- handle_level_irq);
+-
+- return 0;
+-}
+-
+-static const struct irq_domain_ops irq_domain_ops = {
+- .xlate = irq_domain_xlate_onecell,
+- .map = gic_map,
+-};
+-
+-static int __init
+-of_gic_init(struct device_node *node,
+- struct device_node *parent)
++unsigned int get_c0_compare_int(void)
+ {
+- struct irq_domain *domain;
+- struct resource gcmp = { 0 }, gic = { 0 };
+- unsigned int gic_rev;
+- int i;
+-
+- if (of_address_to_resource(node, 0, &gic))
+- panic("Failed to get gic memory range");
+- if (request_mem_region(gic.start, resource_size(&gic),
+- gic.name) < 0)
+- panic("Failed to request gic memory");
+- if (of_address_to_resource(node, 2, &gcmp))
+- panic("Failed to get gic memory range");
+- if (request_mem_region(gcmp.start, resource_size(&gcmp),
+- gcmp.name) < 0)
+- panic("Failed to request gcmp memory");
+-
+- _gcmp_base = (unsigned long) ioremap_nocache(gcmp.start, resource_size(&gcmp));
+- if (!_gcmp_base)
+- panic("Failed to remap gcmp memory\n");
+-
+- /* tell the gcmp where to find the gic */
+- write_gcr_gic_base(GIC_BASE_ADDR | CM_GCR_GIC_BASE_GICEN_MSK);
+- gic_present = 1;
+- if (cpu_has_vint) {
+- set_vi_handler(2, gic_irqdispatch);
+- set_vi_handler(3, gic_irqdispatch);
+- set_vi_handler(4, gic_irqdispatch);
+- set_vi_handler(7, vi_timer_irqdispatch);
+- }
+-
+- gic_fill_map();
+-
+- gic_init(gic.start, resource_size(&gic), gic_intr_map,
+- ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
+-
+- GICREAD(GIC_REG(SHARED, GIC_SH_REVISIONID), gic_rev);
+- pr_info("gic: revision %d.%d\n", (gic_rev >> 8) & 0xff, gic_rev & 0xff);
+-
+- domain = irq_domain_add_legacy(node, GIC_NUM_INTRS, MIPS_GIC_IRQ_BASE,
+- 0, &irq_domain_ops, NULL);
+- if (!domain)
+- panic("Failed to add irqdomain");
+-
+-#if defined(CONFIG_MIPS_MT_SMP)
+- for (i = 0; i < nr_cpu_ids; i++) {
+- setup_irq(MIPS_GIC_IRQ_BASE + GIC_RESCHED_INT(i), &irq_resched);
+- setup_irq(MIPS_GIC_IRQ_BASE + GIC_CALL_INT(i), &irq_call);
+- }
+-#endif
+-
+- change_c0_status(ST0_IM, STATUSF_IP7 | STATUSF_IP4 | STATUSF_IP3 |
+- STATUSF_IP2);
+- return 0;
++ return gic_get_c0_compare_int();
+ }
+
+ static struct of_device_id __initdata of_irq_ids[] = {
+- { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init },
+- { .compatible = "ralink,mt7621-gic", .data = of_gic_init },
++ { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_irq_of_init },
++ { .compatible = "mti,gic", .data = gic_of_init },
+ {},
+ };
+
+--- a/drivers/irqchip/irq-mips-gic.c
++++ b/drivers/irqchip/irq-mips-gic.c
+@@ -864,7 +864,7 @@
+ __gic_init(gic_base_addr, gic_addrspace_size, cpu_vec, irqbase, NULL);
+ }
+
+-static int __init gic_of_init(struct device_node *node,
++int __init gic_of_init(struct device_node *node,
+ struct device_node *parent)
+ {
+ struct resource res;
diff --git a/target/linux/ramips/patches-4.3/0054-mtd-add-chunked-read-io-to-m25p80.patch b/target/linux/ramips/patches-4.3/0054-mtd-add-chunked-read-io-to-m25p80.patch
new file mode 100644
index 0000000000..c7a33d2c38
--- /dev/null
+++ b/target/linux/ramips/patches-4.3/0054-mtd-add-chunked-read-io-to-m25p80.patch
@@ -0,0 +1,123 @@
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -1008,6 +1008,66 @@ write_err:
+ return ret;
+ }
+
++static int spi_nor_chunked_write(struct mtd_info *mtd, loff_t _to, size_t _len,
++ size_t *_retlen, const u_char *_buf)
++{
++ struct spi_nor *nor = mtd_to_spi_nor(mtd);
++ int chunk_size;
++ int retlen = 0;
++ int ret;
++
++ chunk_size = nor->chunk_size;
++ if (!chunk_size)
++ chunk_size = _len;
++
++ if (nor->addr_width > 3)
++ chunk_size -= nor->addr_width - 3;
++
++ while (retlen < _len) {
++ size_t len = min_t(int, chunk_size, _len - retlen);
++ const u_char *buf = _buf + retlen;
++ loff_t to = _to + retlen;
++
++ if (nor->flags & SNOR_F_SST)
++ ret = sst_write(mtd, to, len, &retlen, buf);
++ else
++ ret = spi_nor_write(mtd, to, len, &retlen, buf);
++ if (ret)
++ return ret;
++ }
++
++ *_retlen += retlen;
++ return 0;
++}
++
++static int spi_nor_chunked_read(struct mtd_info *mtd, loff_t _from, size_t _len,
++ size_t *_retlen, u_char *_buf)
++{
++ struct spi_nor *nor = mtd_to_spi_nor(mtd);
++ int chunk_size;
++ int ret;
++
++ chunk_size = nor->chunk_size;
++ if (!chunk_size)
++ chunk_size = _len;
++
++ *_retlen = 0;
++ while (*_retlen < _len) {
++ size_t len = min_t(int, chunk_size, _len - *_retlen);
++ u_char *buf = _buf + *_retlen;
++ loff_t from = _from + *_retlen;
++ int retlen = 0;
++
++ ret = spi_nor_read(mtd, from, len, &retlen, buf);
++ if (ret)
++ return ret;
++
++ *_retlen += retlen;
++ }
++
++ return 0;
++}
++
+ static int macronix_quad_enable(struct spi_nor *nor)
+ {
+ int ret, val;
+@@ -1231,10 +1291,12 @@ int spi_nor_scan(struct spi_nor *nor, co
+ }
+
+ /* sst nor chips use AAI word program */
+- if (info->flags & SST_WRITE)
++ if (info->flags & SST_WRITE) {
+ mtd->_write = sst_write;
+- else
++ nor->flags |= SNOR_F_SST;
++ } else {
+ mtd->_write = spi_nor_write;
++ }
+
+ if (info->flags & USE_FSR)
+ nor->flags |= SNOR_F_USE_FSR;
+@@ -1262,11 +1324,20 @@ int spi_nor_scan(struct spi_nor *nor, co
+ mtd->writebufsize = nor->page_size;
+
+ if (np) {
++ u32 val;
++
+ /* If we were instantiated by DT, use it */
+ if (of_property_read_bool(np, "m25p,fast-read"))
+ nor->flash_read = SPI_NOR_FAST;
+ else
+ nor->flash_read = SPI_NOR_NORMAL;
++
++ if (!of_property_read_u32(np, "m25p,chunked-io", &val)) {
++ dev_info(dev, "using chunked io (size=%d)\n", val);
++ mtd->_read = spi_nor_chunked_read;
++ mtd->_write = spi_nor_chunked_write;
++ nor->chunk_size = val;
++ }
+ } else {
+ /* If we weren't instantiated by DT, default to fast-read */
+ nor->flash_read = SPI_NOR_FAST;
+--- a/include/linux/mtd/spi-nor.h
++++ b/include/linux/mtd/spi-nor.h
+@@ -116,6 +116,7 @@ enum spi_nor_ops {
+
+ enum spi_nor_option_flags {
+ SNOR_F_USE_FSR = BIT(0),
++ SNOR_F_SST = BIT(1),
+ };
+
+ /**
+@@ -156,6 +157,7 @@ struct spi_nor {
+ struct device *dev;
+ struct device_node *flash_node;
+ u32 page_size;
++ u16 chunk_size;
+ u8 addr_width;
+ u8 erase_opcode;
+ u8 read_opcode;
diff --git a/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch b/target/linux/ramips/patches-4.3/0100-mtd-split-remove-padding.patch
index 81702c28e8..81702c28e8 100644
--- a/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch
+++ b/target/linux/ramips/patches-4.3/0100-mtd-split-remove-padding.patch
diff --git a/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch b/target/linux/ramips/patches-4.3/0101-mtd-add-rtn56u-support.patch
index 50b88dbcd3..50b88dbcd3 100644
--- a/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch
+++ b/target/linux/ramips/patches-4.3/0101-mtd-add-rtn56u-support.patch
diff --git a/target/linux/ramips/patches-3.18/0103-MIPS-OWRTDTB.patch b/target/linux/ramips/patches-4.3/0103-MIPS-OWRTDTB.patch
index b90138317b..b90138317b 100644
--- a/target/linux/ramips/patches-3.18/0103-MIPS-OWRTDTB.patch
+++ b/target/linux/ramips/patches-4.3/0103-MIPS-OWRTDTB.patch
diff --git a/target/linux/ramips/patches-3.18/0104-fix_bootargs_handling.patch b/target/linux/ramips/patches-4.3/0104-fix_bootargs_handling.patch
index 9f76aa1f5b..9f76aa1f5b 100644
--- a/target/linux/ramips/patches-3.18/0104-fix_bootargs_handling.patch
+++ b/target/linux/ramips/patches-4.3/0104-fix_bootargs_handling.patch
diff --git a/target/linux/ramips/patches-3.18/0200-linkit_bootstrap.patch b/target/linux/ramips/patches-4.3/0200-linkit_bootstrap.patch
index 70e8170c44..70e8170c44 100644
--- a/target/linux/ramips/patches-3.18/0200-linkit_bootstrap.patch
+++ b/target/linux/ramips/patches-4.3/0200-linkit_bootstrap.patch
diff --git a/target/linux/ramips/rt288x/config-3.18 b/target/linux/ramips/rt288x/config-4.3
index f9eacfb964..658e235770 100644
--- a/target/linux/ramips/rt288x/config-3.18
+++ b/target/linux/ramips/rt288x/config-4.3
@@ -1,16 +1,20 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+# CONFIG_ARCH_HAS_SG_CHAIN is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
+# CONFIG_CEVT_SYSTICK_QUIRK is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
@@ -24,24 +28,28 @@ CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS32_R1 is not set
CONFIG_CPU_MIPS32_R2=y
CONFIG_CPU_MIPSR2=y
+CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
CONFIG_CPU_R4K_CACHE_TLB=y
CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
# CONFIG_DTB_RT2880_EVAL is not set
CONFIG_DTB_RT_NONE=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_8250 is not set
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
@@ -50,12 +58,15 @@ CONFIG_GPIO_SYSFS=y
CONFIG_HARDWARE_WATCHPOINTS=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
+CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
CONFIG_HAVE_CC_STACKPROTECTOR=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CONTEXT_TRACKING=y
@@ -64,13 +75,14 @@ CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
@@ -80,23 +92,29 @@ CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IP17XX_PHY=y
CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
+CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
+CONFIG_LIBFDT=y
+# CONFIG_MACH_INGENIC is not set
+# CONFIG_MACH_LOONGSON32 is not set
+# CONFIG_MACH_LOONGSON64 is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=4
CONFIG_MIPS_L1_CACHE_SHIFT_4=y
# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
+CONFIG_MIPS_NO_APPENDED_DTB=y
+# CONFIG_MIPS_RAW_APPENDED_DTB is not set
+CONFIG_MIPS_SPRAM=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
@@ -111,7 +129,8 @@ CONFIG_NEED_PER_CPU_KM=y
CONFIG_NET_RALINK=y
CONFIG_NET_RALINK_MDIO=y
CONFIG_NET_RALINK_MDIO_RT2880=y
-CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_NET_RALINK_RT288X=y
+# CONFIG_NO_IOPORT_MAP is not set
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
@@ -124,28 +143,26 @@ CONFIG_OF_NET=y
CONFIG_PAGEFLAGS_EXTENDED=y
# CONFIG_PCI is not set
CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
# CONFIG_PHY_RALINK_USB is not set
-# CONFIG_PINCONF is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
-# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK=y
-# CONFIG_RALINK_ILL_ACC is not set
-# CONFIG_RALINK_USBPHY is not set
CONFIG_RALINK_WDT=y
-CONFIG_RA_NAT_NONE=y
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SG_SPLIT is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
CONFIG_SOC_RT288X=y
# CONFIG_SOC_RT305X is not set
# CONFIG_SOC_RT3883 is not set
@@ -153,16 +170,19 @@ CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MT7621 is not set
CONFIG_SPI_RT2880=y
+CONFIG_SRCU=y
+# CONFIG_SUNXI_SRAM is not set
CONFIG_SWCONFIG=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_MIPS16=y
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
-# CONFIG_ZBUD is not set
CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/ramips/rt305x/config-3.18 b/target/linux/ramips/rt305x/config-4.3
index 9fb846f90e..4b81771192 100644
--- a/target/linux/ramips/rt305x/config-3.18
+++ b/target/linux/ramips/rt305x/config-4.3
@@ -1,13 +1,15 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -46,12 +48,13 @@ CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
@@ -62,6 +65,7 @@ CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
@@ -83,6 +87,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
@@ -92,20 +97,26 @@ CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
+CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
+# CONFIG_MACH_INGENIC is not set
+# CONFIG_MACH_LOONGSON32 is not set
+# CONFIG_MACH_LOONGSON64 is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_NO_APPENDED_DTB=y
+# CONFIG_MIPS_RAW_APPENDED_DTB is not set
+CONFIG_MIPS_SPRAM=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
@@ -132,25 +143,27 @@ CONFIG_OF_MTD=y
CONFIG_OF_NET=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHY_RALINK_USB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
-# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK=y
# CONFIG_RALINK_ILL_ACC is not set
CONFIG_RALINK_WDT=y
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SG_SPLIT is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
CONFIG_SOC_RT305X=y
# CONFIG_SOC_RT3883 is not set
@@ -158,7 +171,10 @@ CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MT7621 is not set
CONFIG_SPI_RT2880=y
+CONFIG_SRCU=y
+# CONFIG_SUNXI_SRAM is not set
CONFIG_SWCONFIG=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
diff --git a/target/linux/ramips/rt3883/config-3.18 b/target/linux/ramips/rt3883/config-4.3
index 6dccb464dc..1e8bddde2b 100644
--- a/target/linux/ramips/rt3883/config-3.18
+++ b/target/linux/ramips/rt3883/config-4.3
@@ -1,18 +1,21 @@
CONFIG_AR8216_PHY=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_CEVT_R4K=y
+# CONFIG_CEVT_SYSTICK_QUIRK is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
@@ -32,6 +35,8 @@ CONFIG_CPU_R4K_FPU=y
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
CONFIG_CPU_SUPPORTS_MSA=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CSRC_R4K=y
CONFIG_DEBUG_PINCTRL=y
CONFIG_DMA_NONCOHERENT=y
@@ -42,12 +47,13 @@ CONFIG_EARLY_PRINTK=y
CONFIG_ETHERNET_PACKET_MANGLE=y
CONFIG_GENERIC_ATOMIC64=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_DEVRES=y
@@ -58,6 +64,7 @@ CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
@@ -79,6 +86,7 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_MACH_CLKDEV=y
CONFIG_HAVE_MEMBLOCK=y
@@ -88,28 +96,34 @@ CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HW_HAS_PCI=y
CONFIG_HZ_PERIODIC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQCHIP=y
-CONFIG_IRQ_CPU=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_INTC=y
+CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
CONFIG_LIBFDT=y
+# CONFIG_MACH_INGENIC is not set
+# CONFIG_MACH_LOONGSON32 is not set
+# CONFIG_MACH_LOONGSON64 is not set
CONFIG_MDIO_BOARDINFO=y
CONFIG_MIPS=y
# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MACHINE is not set
+CONFIG_MIPS_NO_APPENDED_DTB=y
+# CONFIG_MIPS_RAW_APPENDED_DTB is not set
+CONFIG_MIPS_SPRAM=y
CONFIG_MODULES_USE_ELF_REL=y
# CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_NEED_DMA_MAP_STATE=y
@@ -136,29 +150,29 @@ CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
CONFIG_PHY_RALINK_USB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_RT2880=y
# CONFIG_PINCTRL_SINGLE is not set
-# CONFIG_PREEMPT_RCU is not set
CONFIG_RALINK=y
-# CONFIG_RALINK_ILL_ACC is not set
-CONFIG_RALINK_USBPHY=y
CONFIG_RALINK_WDT=y
# CONFIG_RCU_STALL_COMMON is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RTL8366_SMI=y
CONFIG_RTL8367B_PHY=y
CONFIG_RTL8367_PHY=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_INFO is not set
# CONFIG_SCSI_DMA is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RT288X=y
CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SG_SPLIT is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SOC_MT7620 is not set
-# CONFIG_SOC_MT7621 is not set
# CONFIG_SOC_RT288X is not set
# CONFIG_SOC_RT305X is not set
CONFIG_SOC_RT3883=y
@@ -166,7 +180,10 @@ CONFIG_SPI=y
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MT7621 is not set
CONFIG_SPI_RT2880=y
+CONFIG_SRCU=y
+# CONFIG_SUNXI_SRAM is not set
CONFIG_SWCONFIG=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_CPU_MIPS32_R2=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
@@ -175,7 +192,6 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
CONFIG_SYS_SUPPORTS_MIPS16=y
CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_USB_PHY=y
CONFIG_USB_SUPPORT=y
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y