aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
Diffstat (limited to 'target')
-rw-r--r--target/linux/etrax/files-2.6.30/arch/cris/arch-v10/drivers/i2c_gvc.c499
-rw-r--r--target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch29
2 files changed, 317 insertions, 211 deletions
diff --git a/target/linux/etrax/files-2.6.30/arch/cris/arch-v10/drivers/i2c_gvc.c b/target/linux/etrax/files-2.6.30/arch/cris/arch-v10/drivers/i2c_gvc.c
index 6429401107..e47bc64592 100644
--- a/target/linux/etrax/files-2.6.30/arch/cris/arch-v10/drivers/i2c_gvc.c
+++ b/target/linux/etrax/files-2.6.30/arch/cris/arch-v10/drivers/i2c_gvc.c
@@ -9,26 +9,21 @@
*!
*!***************************************************************************/
-#define DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
-//#undef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
-
/******************** INCLUDE FILES SECTION ****************************/
#include <linux/module.h>
#include <linux/fs.h>
-/**GVC**/
-#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
+#ifdef CONFIG_ETRAX_I2C_DYN_ALLOC
#include <linux/types.h> /* for dev_t */
#include <linux/cdev.h> /* for struct cdev */
#endif
-/**END GVC**/
+
+#include <linux/device.h>
#include "etraxi2c.h"
-/**GVC**/
#include "i2c_errno.h"
-/**END GVC**/
#include <asm/io.h>
#include <asm/delay.h>
@@ -37,7 +32,7 @@
#include "i2c_gvc.h"
-MODULE_DESCRIPTION( "I2C Device Driver - 1.1" );
+MODULE_DESCRIPTION( "I2C Device Driver - 2.3" );
/*!*********************************************************************
*!History I2C driver Geert Vancompernolle
@@ -50,25 +45,20 @@ MODULE_DESCRIPTION( "I2C Device Driver - 1.1" );
*! Changes to remove unwanted spikes at ACK/NACK time.
*!
*!*********************************************************************/
-
+
MODULE_LICENSE( "GPL" );
/****************** MACRO's **********************/
#define D( x )
-/**GVC**/
-#ifndef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
-/**END GVC**/
+#ifndef CONFIG_ETRAX_I2C_DYN_ALLOC
#define I2C_MAJOR 123 /* LOCAL/EXPERIMENTAL */
-/**GVC**/
#endif
-/**END GVC**/
-/**GVC**/
#define WAITONEUS 1
/* Following are abbreviations taken from Philips I2C standard */
-/* Values are representing time in us and are rounded to next whole number, if relevant */
+/* Values are representing time in us and are rounded to next whole number, if relevant */
#define THDSTA 4 /* Hold delay time for (repeated) START condition */
#define TLOW 5 /* LOW period of the SCL clock */
#define THDDAT 1 /* Hold delay time for DATA: value of 0 is allowed but 1 taken to be sure */
@@ -78,11 +68,14 @@ MODULE_LICENSE( "GPL" );
#define TSUSTO 4 /* Set-up time for STOP condition */
#define TBUF 5 /* Bus-free time between STOP and START condition */
+#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY
+#define MAXSCLRETRIES 100
+#endif
+
#define MAXBUSFREERETRIES 5
#define MAXRETRIES 3
#define WRITEADDRESS_MASK ( 0xFE )
#define READADDRESS_MASK ( 0x01 )
-/**END GVC**/
#define SCL_HIGH 1
#define SCL_LOW 0
@@ -100,8 +93,8 @@ MODULE_LICENSE( "GPL" );
#define SDABIT CONFIG_ETRAX_I2C_DATA_PORT
#define SCLBIT CONFIG_ETRAX_I2C_CLK_PORT
-#define i2c_enable()
-#define i2c_disable()
+#define i2c_enable()
+#define i2c_disable()
/* enable or disable output-enable, to select output or input on the i2c bus */
#define i2c_sda_dir_out() \
@@ -109,6 +102,13 @@ MODULE_LICENSE( "GPL" );
#define i2c_sda_dir_in() \
REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, SDABIT, 0 )
+#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY
+#define i2c_scl_dir_out() \
+ REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, SCLBIT, 1 )
+#define i2c_scl_dir_in() \
+ REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, SCLBIT, 0 )
+#endif
+
/* control the i2c clock and data signals */
#define i2c_set_scl( x ) \
REG_SHADOW_SET( R_PORT_PB_DATA, port_pb_data_shadow, SCLBIT, x )
@@ -118,10 +118,8 @@ MODULE_LICENSE( "GPL" );
/* read status of SDA bit from the i2c interface */
#define i2c_sda_is_high() ( ( ( *R_PORT_PB_READ & ( 1 << SDABIT ) ) ) >> SDABIT )
-/**GVC**/
/* read status of SCL bit from the i2c interface */
#define i2c_scl_is_high() ( ( ( *R_PORT_PB_READ & ( 1 << SCLBIT ) ) ) >> SCLBIT )
-/**END GVC**/
#else
/* enable or disable the i2c interface */
@@ -131,7 +129,7 @@ MODULE_LICENSE( "GPL" );
/* enable or disable output-enable, to select output or input on the i2c bus */
#define i2c_sda_dir_out() \
*R_PORT_PB_I2C = ( port_pb_i2c_shadow &= ~IO_MASK( R_PORT_PB_I2C, i2c_oe_ ) ); \
- REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1 );
+ REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, 0, 1 );
#define i2c_sda_dir_in() \
*R_PORT_PB_I2C = ( port_pb_i2c_shadow |= IO_MASK( R_PORT_PB_I2C, i2c_oe_ ) ); \
REG_SHADOW_SET( R_PORT_PB_DIR, port_pb_dir_shadow, 0, 0 );
@@ -160,19 +158,13 @@ MODULE_LICENSE( "GPL" );
/****************** STATIC (file scope) VARIABLES **********************/
static DEFINE_SPINLOCK( i2c_lock ); /* Protect directions etc */
-/**GVC**/
-#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
-static const char i2c_name[] = "i2cgvc";
-#else
static const char i2c_name[] = "i2c";
-#endif
-/**END GVC**/
+
/****************** PROTOTYPING SECTION *************************/
static int i2c_open( struct inode *inode, struct file *filp );
static int i2c_release( struct inode *inode, struct file *filp );
-/**GVC**/
static int i2c_command( unsigned char slave
, unsigned char* wbuf
, unsigned char wlen
@@ -181,8 +173,7 @@ static int i2c_command( unsigned char slave
);
static int i2c_bus_free_check( unsigned char maxretries );
static void i2c_finalise( const char* text, unsigned long irqflags );
-/**END GVC**/
-
+
/************************************************************************/
/****************** AUXILIARIES *************************/
@@ -195,7 +186,7 @@ static void i2c_finalise( const char* text, unsigned long irqflags );
*# DESCRIPTION : opens an I2C device
*#
*# PARAMETERS : *inode: reference to inode
- *# *filp : reference to file pointer
+ *# *filp : reference to file pointer
*#
*#---------------------------------------------------------------------------
*/
@@ -212,7 +203,7 @@ static int i2c_open( struct inode *inode, struct file *filp )
*# DESCRIPTION : Releases the I2C device
*#
*# PARAMETERS : *inode: reference to inode
- *# *filp : reference to file pointer
+ *# *filp : reference to file pointer
*#
*#---------------------------------------------------------------------------
*/
@@ -226,13 +217,13 @@ static int i2c_release( struct inode *inode, struct file *filp )
*#
*# FUNCTION NAME: i2c_ioctl
*#
- *# DESCRIPTION : Main device API: ioctl's to write/read
+ *# DESCRIPTION : Main device API: ioctl's to write/read
*# to/from i2c registers
*#
*# PARAMETERS : *inode: reference to inode
- *# *filp : reference to file pointer
- *# cmd : command to be executed during the ioctl call
- *# arg : pointer to a structure with the data???
+ *# *filp : reference to file pointer
+ *# cmd : command to be executed during the ioctl call
+ *# arg : pointer to a structure with the data???
*#
*# RETURN : result of the ioctl call
*#
@@ -247,13 +238,13 @@ static int i2c_ioctl( struct inode *inode
/* the acme ioctls */
I2C_DATA i2cdata;
int RetVal = EI2CNOERRORS;
-
- if ( _IOC_TYPE( cmd ) != ETRAXI2C_IOCTYPE )
+
+ if ( _IOC_TYPE( cmd ) != ETRAXI2C_IOCTYPE )
{
return ( -EINVAL );
}
-
- switch ( _IOC_NR( cmd ) )
+
+ switch ( _IOC_NR( cmd ) )
{
case I2C_WRITEREG:
/* write to an i2c slave */
@@ -261,24 +252,23 @@ static int i2c_ioctl( struct inode *inode
, I2C_ARGREG( arg )
, I2C_ARGVALUE( arg )
);
- break;
+ break;
case I2C_READREG:
RetVal = i2c_readreg( I2C_ARGSLAVE( arg ), I2C_ARGREG( arg ) );
break;
-
-/**GVC**/
- /* New functions added by GVC */
+
+ /* New functions added by GVC */
case I2C_READ:
copy_from_user( (char*)&i2cdata, (char*)arg, sizeof( I2C_DATA ) );
{
int RetryCntr = MAXRETRIES;
-
+
do
{
RetVal = i2c_command( i2cdata.slave
, NULL
- , 0
+ , 0
, i2cdata.rbuf
, i2cdata.rlen
);
@@ -293,33 +283,33 @@ static int i2c_ioctl( struct inode *inode
copy_from_user( (char*)&i2cdata, (char*)arg, sizeof( I2C_DATA ) );
{
int RetryCntr = MAXRETRIES;
-
+
do
{
RetVal = i2c_command( i2cdata.slave
, i2cdata.wbuf
, i2cdata.wlen
, NULL
- , 0
+ , 0
);
} while ( ( EI2CNOERRORS != RetVal )
&&( --RetryCntr )
);
}
break;
-
+
case I2C_WRITEREAD:
copy_from_user( (char*)&i2cdata, (char*)arg, sizeof( I2C_DATA ) );
{
int RetryCntr = MAXRETRIES;
-
+
do
{
RetVal = i2c_command( i2cdata.slave
, i2cdata.wbuf
, i2cdata.wlen
, i2cdata.rbuf
- , i2cdata.rlen
+ , i2cdata.rlen
);
} while ( ( EI2CNOERRORS != RetVal )
&&( --RetryCntr )
@@ -327,12 +317,11 @@ static int i2c_ioctl( struct inode *inode
}
copy_to_user( (char*)arg, (char*)&i2cdata, sizeof( I2C_DATA ) );
break;
-/**END GVC**/
-
+
default:
RetVal = -EINVAL;
}
-
+
return ( -RetVal );
} /* i2c_ioctl */
@@ -342,22 +331,22 @@ static int i2c_ioctl( struct inode *inode
*# FUNCTION NAME: i2c_command
*#
*# DESCRIPTION : general routine to read/write bytes from an I2C device
- *#
+ *#
*# 'i2c_command()' sends wlen bytes to the I2c bus and receives
- *# rlen bytes from the I2c bus.
+ *# rlen bytes from the I2c bus.
*# The data to be send must be placed in wbuf[ 0 ] upto wbuf[ wlen - 1 ).
*# The data to be received is assembled in rbuf[ 0 ] upto rbuf[ rlen - 1 ].
- *#
+ *#
*# If no data is to be sent or received, put appropriate buffer parameter
*# to "NULL" and appropriate length parameter to "0".
- *#
+ *#
*# PARAMETERS : slave = slave address of the I2C device
*# wbuf = address of first element of write buffer (wbuf)
*# wlen = number of bytes to be written to slave
*# rbuf = address of first element of read buffer (rbuf)
*# rlen = number of bytes to be read from slave
*#
- *# RETURN :
+ *# RETURN :
*# EI2CNOERRORS: I2C communication went fine
*# EI2CBUSNFREE: I2C bus is not free
*# EI2CWADDRESS: I2C write address failed
@@ -374,15 +363,15 @@ static int i2c_ioctl( struct inode *inode
*# EI2CNOACKNLD: I2C no acknowledge received
*#
*# REMARK :
- *# First, the send part is completed.
+ *# First, the send part is completed.
*# In the send routine, there is no stop generated. This is because maybe
*# a repeated start condition must be generated.
*# This happens when we want to receive some data from the I2c bus. If not,
*# at the end of the general I2c loop the stopcondition is generated.
*# If, on the contrary, there are a number of bytes to be received, a new
- *# startcondition is generated in the 'if' part of the main I2c routine,
- *# which controls the receiving part.
- *# Only when the receiving of data is finished, a final stopcondition is
+ *# startcondition is generated in the 'if' part of the main I2c routine,
+ *# which controls the receiving part.
+ *# Only when the receiving of data is finished, a final stopcondition is
*# generated.
*#
*#---------------------------------------------------------------------------
@@ -434,16 +423,16 @@ static int i2c_command( unsigned char slave
/* we don't like to be interrupted */
local_irq_save( irqflags );
- /* Check if there are bytes to be send,
+ /* Check if there are bytes to be send,
* or if you immediately want to receive data.
*/
if ( 0 < wlen )
{
- /* start I2C communication */
+ /* start I2C communication */
if ( EI2CNOERRORS != i2c_start() )
{
return ( i2c_finalise( "I2C: EI2CSTRTCOND\n", irqflags )
- , EI2CSTRTCOND
+ , EI2CSTRTCOND
);
}
@@ -451,23 +440,23 @@ static int i2c_command( unsigned char slave
if ( EI2CNOERRORS != i2c_outbyte( slave & WRITEADDRESS_MASK ) )
{
return ( i2c_finalise( "I2C: EI2CWADDRESS\n", irqflags )
- , EI2CWADDRESS
+ , EI2CWADDRESS
);
}
while ( wlen-- )
- {
+ {
/* send register data */
- if ( EI2CNOERRORS != i2c_outbyte( *wbuf ) )
+ if ( EI2CNOERRORS != i2c_outbyte( *wbuf ) && wlen )
{
return ( i2c_finalise( "I2C: EI2CSENDDATA\n", irqflags )
- , EI2CSENDDATA
+ , EI2CSENDDATA
);
}
-
+
wbuf++;
};
-
+
i2c_delay( TLOW );
}
@@ -481,12 +470,12 @@ static int i2c_command( unsigned char slave
if ( 0 < rlen )
{
/*
- * Generate start condition if wlen == 0
+ * Generate start condition if wlen == 0
* or repeated start condition if wlen != 0...
*/
if ( EI2CNOERRORS != i2c_start() )
{
- return ( i2c_finalise( ( ( 0 < wlen )
+ return ( i2c_finalise( ( ( 0 < wlen )
? "I2C: EI2CRSTACOND\n"
: "I2C: EI2CSTRTCOND\n"
)
@@ -503,21 +492,21 @@ static int i2c_command( unsigned char slave
, EI2CRADDRESS
);
}
-
+
while ( rlen-- )
{
/* fetch register */
*rbuf = i2c_inbyte();
rbuf++;
-
+
/* last received byte needs to be NACK-ed instead of ACK-ed */
if ( rlen )
{
i2c_sendack();
}
- else
+ else
{
- i2c_sendnack();
+ i2c_sendnack();
}
};
}
@@ -525,15 +514,15 @@ static int i2c_command( unsigned char slave
/* Generate final stop condition */
if ( EI2CNOERRORS != i2c_stop() )
{
- return ( i2c_finalise( "I2C: EI2CSTOPCOND\n", irqflags )
+ return ( i2c_finalise( "I2C CMD: EI2CSTOPCOND\n", irqflags )
, EI2CSTOPCOND
);
- }
-
+ }
+
/* enable interrupt again */
local_irq_restore( irqflags );
}
-
+
return ( EI2CNOERRORS );
} /* i2c_command */
@@ -544,12 +533,12 @@ static int i2c_command( unsigned char slave
*#
*# DESCRIPTION : checks if the I2C bus is free before starting
*# an I2C communication
- *#
+ *#
*# PARAMETERS : maxretries, the number of times we will try to release
- *# the I2C bus
+ *# the I2C bus
*#
*# RETURN : I2cStatus_I2cBusNotFreeError in case the bus is not free,
- *# I2cStatus_I2cNoError otherwise
+ *# I2cStatus_I2cNoError otherwise
*#
*#---------------------------------------------------------------------------
*/
@@ -557,9 +546,9 @@ static int i2c_bus_free_check( unsigned char maxretries )
{
i2c_sda_dir_in(); /* Release SDA line */
i2c_set_scl( SCL_HIGH ); /* put SCL line high */
-
+
i2c_delay( WAITONEUS );
-
+
while ( ( !i2c_sda_is_high() || !i2c_scl_is_high() )
&&( maxretries-- )
)
@@ -567,13 +556,13 @@ static int i2c_bus_free_check( unsigned char maxretries )
/* Try to release I2C bus by generating STOP conditions */
i2c_stop();
}
-
+
if ( 0 == maxretries )
{
printk( KERN_DEBUG "I2C: EI2CBUSNFREE\n" );
return ( EI2CBUSNFREE );
}
- else
+ else
{
return ( EI2CNOERRORS );
}
@@ -592,10 +581,10 @@ static void i2c_finalise( const char* errortxt
* what I can do more for the moment...
*/
(void)i2c_bus_free_check( MAXBUSFREERETRIES );
-} /* i2c_finalise */
+} /* i2c_finalise */
-static struct file_operations i2c_fops =
+static struct file_operations i2c_fops =
{
.owner = THIS_MODULE
, .ioctl = i2c_ioctl
@@ -623,24 +612,24 @@ int __init i2c_init( void )
static int res = 0;
static int first = 1;
- if ( !first )
+ if ( !first )
{
return res;
}
-
+
first = 0;
/* Setup and enable the Port B I2C interface */
#ifndef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
/* here, we're using the dedicated I2C pins of FoxBoard */
- if ( ( res = cris_request_io_interface( if_i2c, "I2C" ) ) )
+ if ( ( res = cris_request_io_interface( if_i2c, "I2C" ) ) )
{
printk( KERN_CRIT "i2c_init: Failed to get IO interface\n" );
return res;
}
- *R_PORT_PB_I2C = port_pb_i2c_shadow |=
+ *R_PORT_PB_I2C = port_pb_i2c_shadow |=
IO_STATE( R_PORT_PB_I2C, i2c_en, on ) |
IO_FIELD( R_PORT_PB_I2C, i2c_d, 1 ) |
IO_FIELD( R_PORT_PB_I2C, i2c_set_scl, 1 ) |
@@ -653,34 +642,34 @@ int __init i2c_init( void )
IO_STATE( R_PORT_PB_DIR, dir0, input ) |
IO_STATE( R_PORT_PB_DIR, dir1, output ) );
#else
- /* If everything goes fine, res = 0, meaning "if" fails =>
+ /* If everything goes fine, res = 0, meaning "if" fails =>
* will do the "else" too and as such initialise the clock port...
- * Clever trick!
+ * Clever trick!
*/
if ( ( res = cris_io_interface_allocate_pins( if_i2c
, 'b'
, CONFIG_ETRAX_I2C_DATA_PORT
- , CONFIG_ETRAX_I2C_DATA_PORT
- )
- )
- )
+ , CONFIG_ETRAX_I2C_DATA_PORT
+ )
+ )
+ )
{
printk( KERN_WARNING "i2c_init: Failed to get IO pin for I2C data port\n" );
return ( res );
}
- /* Same here...*/
+ /* Same here...*/
else if ( ( res = cris_io_interface_allocate_pins( if_i2c
, 'b'
, CONFIG_ETRAX_I2C_CLK_PORT
- , CONFIG_ETRAX_I2C_CLK_PORT
- )
- )
- )
+ , CONFIG_ETRAX_I2C_CLK_PORT
+ )
+ )
+ )
{
cris_io_interface_free_pins( if_i2c
, 'b'
, CONFIG_ETRAX_I2C_DATA_PORT
- , CONFIG_ETRAX_I2C_DATA_PORT
+ , CONFIG_ETRAX_I2C_DATA_PORT
);
printk( KERN_WARNING "i2c_init: Failed to get IO pin for I2C clk port\n" );
}
@@ -700,72 +689,70 @@ int __init i2c_init( void )
*#
*#---------------------------------------------------------------------------
*/
+
+static struct class *i2c_class;
+
static int __init i2c_register( void )
{
int res;
-/**GVC**/
-#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
+#ifdef CONFIG_ETRAX_I2C_DYN_ALLOC
dev_t devt;
struct cdev *my_i2cdev = NULL;
#endif
-/**END GVC**/
res = i2c_init();
-
+
if ( res < 0 )
{
return res;
}
-
-/**GVC**/
-#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
+
+#ifdef CONFIG_ETRAX_I2C_DYN_ALLOC
res = alloc_chrdev_region( &devt, 0, 1, i2c_name );
-
+
if ( res < 0 )
{
printk( KERN_DEBUG "I2C: EI2CNOMNUMBR\n" );
return ( res );
}
-
+
my_i2cdev = cdev_alloc();
my_i2cdev->ops = &i2c_fops;
my_i2cdev->owner = THIS_MODULE;
-
- /* make device "alive" */
+
+ /* make device "alive" */
res = cdev_add( my_i2cdev, devt, 1 );
-
+
if ( res < 0 )
- {
+ {
printk( KERN_DEBUG "I2C: EI2CDADDFAIL\n" );
return ( res );
}
+
+ int i2c_major = MAJOR( devt );
#else
-/**END GVC**/
res = register_chrdev( I2C_MAJOR, i2c_name, &i2c_fops );
-
- if ( res < 0 )
+
+ if ( res < 0 )
{
printk( KERN_ERR "i2c: couldn't get a major number.\n" );
return res;
}
-/**GVC**/
+
+ int i2c_major = I2C_MAJOR;
#endif
-/**END GVC**/
- printk( KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n" );
+ printk( KERN_INFO "I2C: driver v2.3, (c) 1999-2004 Axis Communications AB\n" );
+ printk( KERN_INFO "I2C: Improvements by Geert Vancompernolle, Positive Going, BK srl\n" );
-/**GVC**/
- printk( KERN_INFO " ==> Improvements done by Geert Vancompernolle - December 2006\n" );
+#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY
+ printk( KERN_INFO "I2C: with master/slave delay patch\n" );
+#endif
+
+ i2c_class = class_create (THIS_MODULE, "i2c_etrax");
+ device_create (i2c_class, NULL,
+ MKDEV(i2c_major,0), NULL, i2c_name);
-#ifdef DYNAMIC_MAJOR_I2CDEV_NUMBER_ALLOC
- printk( KERN_INFO "I2C Major: %d / I2C Name: %s\n", MAJOR( devt ), i2c_name );
-#else
-/**END GVC**/
- printk( KERN_INFO "I2C Major: %d / I2C Name: %s\n", I2C_MAJOR, i2c_name );
-/**GVC**/
-#endif
-/**END GVC**/
-
return ( 0 );
} /* i2c_register */
@@ -784,32 +771,32 @@ static int __init i2c_register( void )
*/
int i2c_start( void )
{
- /* Set SCL=1, SDA=1 */
- i2c_sda_dir_out();
- i2c_set_sda( SDA_HIGH );
- i2c_delay( WAITONEUS );
- i2c_set_scl( SCL_HIGH );
- i2c_delay( WAITONEUS );
-
- /* Set SCL=1, SDA=0 */
- i2c_set_sda( SDA_LOW );
- i2c_delay( THDSTA );
-
- /* Set SCL=0, SDA=0 */
- i2c_set_scl( SCL_LOW );
- /* We can take 1 us less than defined in spec (5 us), since the next action
- * will be to set the dataline high or low and this action is 1 us
- * before the clock is put high, so that makes our 5 us.
- */
- i2c_delay( TLOW - WAITONEUS );
-
- if ( i2c_sda_is_high() || i2c_scl_is_high() )
+ /* Set SCL=1, SDA=1 */
+ i2c_sda_dir_out();
+ i2c_set_sda( SDA_HIGH );
+ i2c_delay( WAITONEUS );
+ i2c_set_scl( SCL_HIGH );
+ i2c_delay( WAITONEUS );
+
+ /* Set SCL=1, SDA=0 */
+ i2c_set_sda( SDA_LOW );
+ i2c_delay( THDSTA );
+
+ /* Set SCL=0, SDA=0 */
+ i2c_set_scl( SCL_LOW );
+ /* We can take 1 us less than defined in spec (5 us), since the next action
+ * will be to set the dataline high or low and this action is 1 us
+ * before the clock is put high, so that makes our 5 us.
+ */
+ i2c_delay( TLOW - WAITONEUS );
+
+ if ( i2c_sda_is_high() || i2c_scl_is_high() )
{
- printk( KERN_DEBUG "I2C: EI2CSTRTCOND\n" );
- return ( EI2CSTRTCOND );
+ printk( KERN_DEBUG "I2C: EI2CSTRTCOND\n" );
+ return ( EI2CSTRTCOND );
}
-
- return ( EI2CNOERRORS );
+
+ return ( EI2CNOERRORS );
} /* i2c_start */
@@ -827,8 +814,11 @@ int i2c_start( void )
*/
int i2c_stop( void )
{
+#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY
+ int n=MAXSCLRETRIES;
+#endif
i2c_sda_dir_out();
-
+
/* Set SCL=0, SDA=0 */
/* Don't change order, otherwise you might generate a start condition! */
i2c_set_scl( SCL_LOW );
@@ -837,20 +827,33 @@ int i2c_stop( void )
i2c_delay( WAITONEUS );
/* Set SCL=1, SDA=0 */
+
+#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY
+ i2c_set_scl( SCL_HIGH );
+ i2c_scl_dir_in();
+ for( ; n>0; n-- )
+ {
+ if( i2c_scl_is_high() )
+ break;
+ i2c_delay( TSUSTO );
+ }
+
+ i2c_scl_dir_out();
+#else
i2c_set_scl( SCL_HIGH );
+#endif
i2c_delay( TSUSTO );
/* Set SCL=1, SDA=1 */
i2c_set_sda( SDA_HIGH );
i2c_delay( TBUF );
-
+
i2c_sda_dir_in();
if ( !i2c_sda_is_high() || !i2c_scl_is_high() )
- {
- printk( KERN_DEBUG "I2C: EI2CSTOPCOND\n" );
- return ( EI2CSTOPCOND );
- }
+ {
+ return ( EI2CSTOPCOND );
+ }
return ( EI2CNOERRORS );
} /* i2c_stop */
@@ -874,17 +877,17 @@ int i2c_outbyte( unsigned char x )
i2c_sda_dir_out();
- for ( i = 0; i < 8; i++ )
+ for ( i = 0; i < 8; i++ )
{
- if ( x & 0x80 )
+ if ( x & 0x80 )
{
i2c_set_sda( SDA_HIGH );
- }
- else
+ }
+ else
{
i2c_set_sda( SDA_LOW );
}
-
+
i2c_delay( TSUDAT );
i2c_set_scl( SCL_HIGH );
i2c_delay( THIGH );
@@ -901,16 +904,15 @@ int i2c_outbyte( unsigned char x )
i2c_delay( TLOW - TSUDAT - WAITONEUS );
x <<= 1;
}
-
+
/* enable input */
i2c_sda_dir_in();
-
+
if ( !i2c_getack() )
- {
- printk( KERN_DEBUG "I2C: EI2CNOACKNLD\n" );
+ {
return( EI2CNOACKNLD );
- }
-
+ }
+
return ( EI2CNOERRORS );
} /* i2c_outbyte */
@@ -929,6 +931,9 @@ int i2c_outbyte( unsigned char x )
*/
unsigned char i2c_inbyte( void )
{
+#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY
+ int n=MAXSCLRETRIES;
+#endif
unsigned char aBitByte = 0;
unsigned char Mask = 0x80; /* !!! ATTENTION: do NOT use 'char', otherwise shifting is wrong!!! */
/* Must be UNSIGNED, not SIGNED! */
@@ -940,7 +945,20 @@ unsigned char i2c_inbyte( void )
while ( Mask != 0 )
{
+#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY
+ i2c_scl_dir_in();
+ for( ; n>0; n-- )
+ {
+ if( i2c_scl_is_high() )
+ break;
+ i2c_delay( THIGH );
+ }
+
+ i2c_set_scl( SCL_HIGH );
+ i2c_scl_dir_out();
+#else
i2c_set_scl( SCL_HIGH );
+#endif
i2c_delay( THIGH );
if ( i2c_sda_is_high() )
@@ -978,15 +996,44 @@ unsigned char i2c_inbyte( void )
int i2c_getack( void )
{
int ack = 1;
+#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY
+ int n=MAXSCLRETRIES;
+#endif
/* generate ACK clock pulse */
i2c_set_scl( SCL_HIGH );
-
+
/* switch off I2C */
i2c_disable();
+#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY
+ /* set clock low */
+ i2c_set_scl( SCL_LOW );
+
/* now wait for ack */
i2c_delay( THIGH );
+
+ /* set clock as input */
+ i2c_scl_dir_in();
+
+ /* wait for clock to rise (n=MAXSCLRETRIES) */
+ for( ; n>0; n-- )
+ {
+ if( i2c_scl_is_high() )
+ break;
+ i2c_delay( THIGH );
+ }
+
+ i2c_set_scl( SCL_HIGH );
+
+ i2c_scl_dir_out();
+
+ i2c_delay( THIGH );
+#else
+ /* now wait for ack */
+ i2c_delay( THIGH );
+#endif
+
/* check for ack: if SDA is high, then NACK, else ACK */
if ( i2c_sda_is_high() )
{
@@ -996,7 +1043,7 @@ int i2c_getack( void )
{
ack = 1;
}
-
+
/* end clock pulse */
i2c_enable();
i2c_set_scl( SCL_LOW );
@@ -1005,7 +1052,7 @@ int i2c_getack( void )
/* Since we "lost" already THDDAT time, we can subtract it here... */
i2c_delay( TLOW - THDDAT );
-
+
return ( ack );
} /* i2c_getack */
@@ -1024,6 +1071,10 @@ int i2c_getack( void )
*/
void i2c_sendack( void )
{
+#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY
+ int n=MAXSCLRETRIES;
+#endif
+
/* enable output */
/* Clock has been set to TLOW already at end of i2c_inbyte()
* and i2c_outbyte(), so no need to do it again.
@@ -1033,8 +1084,25 @@ void i2c_sendack( void )
i2c_set_sda( SDA_LOW );
/* generate clock pulse */
i2c_delay( TSUDAT );
+
+#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY
+ i2c_scl_dir_in();
+ /* wait for clock to rise (n=MAXSCLRETRIES) */
+ for( ; n>0; n-- )
+ {
+ if( i2c_scl_is_high() )
+ break;
+ i2c_delay( THIGH );
+ }
+
i2c_set_scl( SCL_HIGH );
+ i2c_scl_dir_out();
i2c_delay( THIGH );
+#else
+ i2c_set_scl( SCL_HIGH );
+
+ i2c_delay( THIGH );
+#endif
i2c_set_scl( SCL_LOW );
i2c_delay( THDDAT );
/* reset data out */
@@ -1061,6 +1129,10 @@ void i2c_sendack( void )
*/
void i2c_sendnack( void )
{
+#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY
+ int n=MAXSCLRETRIES;
+#endif
+
/* make sure the SDA line is set high prior to activation of the output.
* this way, you avoid an unnecessary peak to ground when a NACK has to
* be created.
@@ -1072,13 +1144,30 @@ void i2c_sendnack( void )
/* generate clock pulse */
i2c_delay( TSUDAT );
+
+#ifdef CONFIG_ETRAX_I2C_SLAVE_DELAY
+ i2c_scl_dir_in();
+ /* wait for clock to rise (n=MAXSCLRETRIES) */
+ for( ; n>0; n-- )
+ {
+ if( i2c_scl_is_high() )
+ break;
+ i2c_delay( THIGH );
+ }
+
+ i2c_set_scl( SCL_HIGH );
+ i2c_scl_dir_out();
+ i2c_delay( THIGH );
+#else
i2c_set_scl( SCL_HIGH );
+
i2c_delay( THIGH );
+#endif
i2c_set_scl( SCL_LOW );
i2c_delay( TSUDAT );
i2c_set_sda( SDA_LOW );
i2c_delay( TLOW - TSUDAT );
-
+
/* There's no need to change the direction of SDA to "in" again,
* since a NACK is always followed by a stop condition.
* A STOP condition will put the direction of SDA back to "out"
@@ -1108,7 +1197,7 @@ void i2c_sendnack( void )
*/
int i2c_writereg( unsigned char theSlave
, unsigned char theReg
- , unsigned char theValue
+ , unsigned char theValue
)
{
int error, cntr = 3;
@@ -1116,7 +1205,7 @@ int i2c_writereg( unsigned char theSlave
spin_lock( &i2c_lock );
- do
+ do
{
error = 0;
/* we don't like to be interrupted */
@@ -1128,24 +1217,24 @@ int i2c_writereg( unsigned char theSlave
{
error = 1;
}
-
+
/* now select register */
if ( EI2CNOACKNLD == i2c_outbyte( theReg ) )
{
error |= 2;
}
-
+
/* send register register data */
if ( EI2CNOACKNLD == i2c_outbyte( theValue ) )
{
error |= 4;
}
-
+
/* end byte stream */
i2c_stop();
/* enable interrupt again */
local_irq_restore( flags );
-
+
} while ( error && cntr-- );
i2c_delay( TLOW );
@@ -1163,7 +1252,7 @@ int i2c_writereg( unsigned char theSlave
*# DESCRIPTION : reads the value from a certain register of an I2C device.
*# Function first writes the register that it wants to read
*# later on.
- *#
+ *#
*# PARAMETERS : theSlave = slave address of the I2C device
*# theReg = register of the I2C device that needs to be written
*#
@@ -1176,7 +1265,7 @@ int i2c_writereg( unsigned char theSlave
*#---------------------------------------------------------------------------
*/
unsigned char i2c_readreg( unsigned char theSlave
- , unsigned char theReg
+ , unsigned char theReg
)
{
unsigned char b = 0;
@@ -1185,16 +1274,16 @@ unsigned char i2c_readreg( unsigned char theSlave
spin_lock( &i2c_lock );
- do
+ do
{
error = 0;
-
+
/* we don't like to be interrupted */
local_irq_save( flags );
-
+
/* generate start condition */
i2c_start();
-
+
/* send slave address */
if ( EI2CNOACKNLD == i2c_outbyte( theSlave & 0xfe ) )
{
@@ -1207,18 +1296,18 @@ unsigned char i2c_readreg( unsigned char theSlave
if ( EI2CNOACKNLD == i2c_outbyte( theReg ) )
{
error |= 2;
- }
+ }
/* repeat start condition */
i2c_delay( TLOW );
i2c_start();
-
+
/* send slave address */
if ( EI2CNOACKNLD == i2c_outbyte( theSlave | 0x01 ) )
{
error |= 1;
}
-
+
/* fetch register */
b = i2c_inbyte();
/*
@@ -1226,13 +1315,13 @@ unsigned char i2c_readreg( unsigned char theSlave
* instead of acked
*/
i2c_sendnack();
-
+
/* end sequence */
i2c_stop();
-
+
/* enable interrupt again */
local_irq_restore( flags );
-
+
} while ( error && cntr-- );
spin_unlock( &i2c_lock );
@@ -1246,7 +1335,7 @@ unsigned char i2c_readreg( unsigned char theSlave
*# FUNCTION NAME: i2c_read
*#
*# DESCRIPTION :
- *#
+ *#
*# PARAMETERS :
*#
*# RETURN :
@@ -1264,7 +1353,7 @@ int i2c_read( unsigned char slave, unsigned char* rbuf, unsigned char rlen )
*# FUNCTION NAME: i2c_write
*#
*# DESCRIPTION :
- *#
+ *#
*# PARAMETERS :
*#
*# RETURN :
@@ -1282,7 +1371,7 @@ int i2c_write( unsigned char slave, unsigned char* wbuf, unsigned char wlen )
*# FUNCTION NAME: i2c_writeread
*#
*# DESCRIPTION :
- *#
+ *#
*# PARAMETERS :
*#
*# RETURN :
diff --git a/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch b/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch
index dc63165c5e..115fd1c9b9 100644
--- a/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch
+++ b/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch
@@ -1,6 +1,8 @@
---- a/arch/cris/arch-v10/drivers/Kconfig
-+++ b/arch/cris/arch-v10/drivers/Kconfig
-@@ -450,11 +450,18 @@ config ETRAX_I2C
+Index: linux-2.6.30.8/arch/cris/arch-v10/drivers/Kconfig
+===================================================================
+--- linux-2.6.30.8.orig/arch/cris/arch-v10/drivers/Kconfig 2009-10-02 11:31:49.000000000 +0200
++++ linux-2.6.30.8/arch/cris/arch-v10/drivers/Kconfig 2009-10-06 10:36:23.000000000 +0200
+@@ -450,11 +450,31 @@
i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
@@ -11,6 +13,19 @@
+ help
+ Enables an I2C driver with Geert Vancompernolle improvement.
+
++config ETRAX_I2C_SLAVE_DELAY
++ bool "I2C Slave delay support"
++ depends on ETRAX_I2C_GVC && EXPERIMENTAL
++ help
++ Enable this to enhanced master/slave dialog
++ Improvement by Positive Going (www.positivegoing.it) and BK srl (www.b-k.it)
++
++config ETRAX_I2C_DYN_ALLOC
++ bool "I2C major device dynamic alloc"
++ depends on ETRAX_I2C_GVC && EXPERIMENTAL
++ help
++ Enable this to dynamicaly alloc major i2c device number
++
# this is true for most products since PB-I2C seems to be somewhat
# flawed..
config ETRAX_I2C_USES_PB_NOT_PB_I2C
@@ -20,7 +35,7 @@
help
Select whether to use the special I2C mode in the PB I/O register or
not. This option needs to be selected in order to use some drivers
-@@ -478,7 +485,7 @@ config ETRAX_I2C_CLK_PORT
+@@ -478,7 +498,7 @@
config ETRAX_I2C_EEPROM
bool "I2C EEPROM (non-volatile RAM) support"
@@ -29,8 +44,10 @@
help
Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C
driver. Select size option: Probed, 2k, 8k, 16k.
---- a/arch/cris/arch-v10/drivers/Makefile
-+++ b/arch/cris/arch-v10/drivers/Makefile
+Index: linux-2.6.30.8/arch/cris/arch-v10/drivers/Makefile
+===================================================================
+--- linux-2.6.30.8.orig/arch/cris/arch-v10/drivers/Makefile 2009-10-02 11:31:14.000000000 +0200
++++ linux-2.6.30.8/arch/cris/arch-v10/drivers/Makefile 2009-10-02 11:31:50.000000000 +0200
@@ -4,6 +4,7 @@
obj-$(CONFIG_ETRAX_AXISFLASHMAP) += axisflashmap.o