aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network2
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata3
-rw-r--r--target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts56
-rw-r--r--target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts163
-rw-r--r--target/linux/ath79/dts/qca9563_elecom_wrc-ghbk2-i.dtsi127
-rw-r--r--target/linux/ath79/image/generic.mk11
6 files changed, 224 insertions, 138 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 1be7a63c85..83bede0961 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -77,6 +77,7 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
;;
+ elecom,wrc-1750ghbk2-i|\
elecom,wrc-300ghbk2-i)
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
@@ -244,6 +245,7 @@ ath79_setup_macs()
lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
;;
+ elecom,wrc-1750ghbk2-i|\
elecom,wrc-300ghbk2-i)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2)
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 7fe19c0604..45d3819c21 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -96,6 +96,9 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
;;
+ elecom,wrc-1750ghbk2-i)
+ ath10kcal_extract "ART" 20480 2116
+ ;;
glinet,ar750s|\
tplink,re450-v2)
ath10kcal_extract "art" 20480 2116
diff --git a/target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts b/target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts
new file mode 100644
index 0000000000..287dee6bb1
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_elecom_wrc-1750ghbk2-i.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9563_elecom_wrc-ghbk2-i.dtsi"
+
+/ {
+ model = "ELECOM WRC-1750GHBK2-I/C";
+ compatible = "elecom,wrc-1750ghbk2-i", "qca,qca9563";
+};
+
+&leds {
+ power: power {
+ label = "elecom:blue:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "elecom:blue:wlan2g";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "elecom:blue:wlan5g";
+ gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
+ };
+};
+
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf70000>;
+ };
+
+ partition@fe0000 {
+ label = "hwconfig";
+ reg = <0xfe0000 0x010000>;
+ read-only;
+ };
+
+ ART: partition@ff0000 {
+ label = "ART";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts b/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts
index bb1f350150..c823f4a342 100644
--- a/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts
+++ b/target/linux/ath79/dts/qca9563_elecom_wrc-300ghbk2-i.dts
@@ -4,156 +4,43 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include "qca956x.dtsi"
+#include "qca9563_elecom_wrc-ghbk2-i.dtsi"
/ {
model = "ELECOM WRC-300GHBK2-I";
compatible = "elecom,wrc-300ghbk2-i", "qca,qca9563";
+};
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
- aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
+&leds {
+ power: power {
+ label = "elecom:white:power";
+ gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
- leds {
- compatible = "gpio-leds";
-
- power: power {
- label = "wrc-300ghbk2-i:white:power";
- gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- wlan2g {
- label = "wrc-300ghbk2-i:white:wlan2g";
- gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tpt";
- };
-
- wps {
- label = "wrc-300ghbk2-i:red:wps";
- gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- };
-
- button_wps {
- label = "wps";
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- };
-
- ap {
- label = "ap";
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- debounce-interval = <60>;
- };
+ wlan2g {
+ label = "elecom:white:wlan2g";
+ gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
};
};
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- read-only;
- };
-
- partition@50000 {
- label = "nvram";
- reg = <0x050000 0x020000>;
- read-only;
- };
-
- partition@70000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x070000 0x770000>;
- };
-
- partition@7e0000 {
- label = "hwconfig";
- reg = <0x7e0000 0x010000>;
- read-only;
- };
-
- ART: partition@7f0000 {
- label = "ART";
- reg = <0x7f0000 0x010000>;
- read-only;
- };
- };
+&partitions {
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0x770000>;
};
-};
-
-&mdio0 {
- status = "okay";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "sgmii";
- qca,ar8327-initvals = <
- 0x04 0x00000080 /* PORT0 PAD MODE CTRL */
- 0x50 0xcf37cf37 /* LED_CTRL0 */
- 0x54 0x00000000 /* LED_CTRL1 */
- 0x58 0x00000000 /* LED_CTRL2 */
- 0x5c 0x03ffff00 /* LED_CTRL3 */
- 0x7c 0x0000007e /* PORT0_STATUS */
- >;
+ partition@7e0000 {
+ label = "hwconfig";
+ reg = <0x7e0000 0x010000>;
+ read-only;
};
-};
-
-&eth0 {
- status = "okay";
-
- mtd-mac-address = <&ART 0x1002>;
- mtd-mac-address-increment = <(-1)>;
- phy-mode = "sgmii";
- phy-handle = <&phy0>;
-};
-&uart {
- status = "okay";
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&ART 0x1000>;
+ ART: partition@7f0000 {
+ label = "ART";
+ reg = <0x7f0000 0x010000>;
+ read-only;
+ };
};
diff --git a/target/linux/ath79/dts/qca9563_elecom_wrc-ghbk2-i.dtsi b/target/linux/ath79/dts/qca9563_elecom_wrc-ghbk2-i.dtsi
new file mode 100644
index 0000000000..8d5bbe180c
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_elecom_wrc-ghbk2-i.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca956x.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "elecom:red:wps";
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ button_wps {
+ label = "wps";
+ gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+
+ ap {
+ label = "ap";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions: partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "nvram";
+ reg = <0x050000 0x020000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x00000080 /* PORT0 PAD MODE CTRL */
+ 0x50 0xcf37cf37 /* LED_CTRL0 */
+ 0x54 0x00000000 /* LED_CTRL1 */
+ 0x58 0x00000000 /* LED_CTRL2 */
+ 0x5c 0x03ffff00 /* LED_CTRL3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ pll-data = <0x03000101 0x00000101 0x00001919>;
+
+ mtd-mac-address = <&ART 0x1002>;
+ mtd-mac-address-increment = <(-1)>;
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&ART 0x1000>;
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 2f9b2c9d7e..31c62f659d 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -221,6 +221,17 @@ define Device/dlink_dir-859-a1
endef
TARGET_DEVICES += dlink_dir-859-a1
+define Device/elecom_wrc-1750ghbk2-i
+ ATH_SOC := qca9563
+ DEVICE_TITLE := ELECOM WRC-1750GHBK2-I/C
+ IMAGE_SIZE := 15808k
+ KERNEL_INITRAMFS := $$(KERNEL) | pad-to 2 | \
+ elecom-header 16187314 RN68 WRC-1750GHBK2 \
+ $(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.bin
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += elecom_wrc-1750ghbk2-i
+
define Device/elecom_wrc-300ghbk2-i
ATH_SOC := qca9563
DEVICE_TITLE := ELECOM WRC-300GHBK2-I