diff options
Diffstat (limited to 'target/linux')
7 files changed, 212 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_linksys_e5600.dts b/target/linux/ramips/dts/mt7621_linksys_e5600.dts new file mode 100644 index 0000000000..91db315914 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_linksys_e5600.dts @@ -0,0 +1,182 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "linksys,e5600", "mediatek,mt7621-soc"; + model = "Linksys E5600"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + leds { + compatible = "gpio-leds"; + + wps { + label = "amber:wps"; + gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + }; + + led_power: power { + label = "blue:power"; + gpios = <&gpio 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + wan_amber { + label = "amber:wan"; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + wan_blue { + label = "blue:wan"; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u_env"; + reg = <0x80000 0x40000>; + read-only; + }; + + factory: partition@c0000 { + label = "factory"; + reg = <0xc0000 0x40000>; + read-only; + }; + + partition@100000 { + label = "s_env"; + reg = <0x100000 0x40000>; + }; + + partition@140000 { + label = "devinfo"; + reg = <0x140000 0x40000>; + read-only; + }; + + partition@180000 { + label = "kernel"; + reg = <0x180000 0x400000>; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x1a00000>; + }; + + partition@1f80000 { + label = "alt_firmware"; + reg = <0x1f80000 0x1e00000>; + }; + + partition@3d80000 { + label = "gdata"; + reg = <0x3d80000 0x4200000>; + }; + }; +}; + +&state_default { + gpio { + groups = "uart2", "uart3", "jtag"; + function = "gpio"; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + }; +}; + +&pcie1 { + mt76@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + }; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan1"; + }; + + port@1 { + status = "okay"; + label = "lan2"; + }; + + port@2 { + status = "okay"; + label = "lan3"; + }; + + port@3 { + status = "okay"; + label = "lan4"; + }; + + port@4 { + status = "okay"; + label = "wan"; + }; + }; +}; + +&xhci { + status = "disabled"; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 6edf6c0cd6..44170b4c1a 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -22,6 +22,10 @@ define Build/elecom-wrc-gs-factory mv $@.new $@ endef +define Build/gemtek-trailer + printf "%s%08X" ".GEMTEK." "$$(cksum $@ | cut -d ' ' -f1)" >> $@ +endef + define Build/iodata-factory $(eval fw_size=$(word 1,$(1))) $(eval fw_type=$(word 2,$(1))) @@ -762,6 +766,25 @@ define Device/lenovo_newifi-d1 endef TARGET_DEVICES += lenovo_newifi-d1 +define Device/linksys_e5600 + $(Device/dsa-migration) + $(Device/uimage-lzma-loader) + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL_SIZE := 4096k + IMAGE_SIZE := 26624k + DEVICE_VENDOR := Linksys + DEVICE_MODEL := E5600 + DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \ + kmod-mt7663-firmware-sta uboot-envtools + UBINIZE_OPTS := -E 5 + IMAGES += factory.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | check-size | append-metadata + IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \ + append-ubi | check-size | gemtek-trailer +endef +TARGET_DEVICES += linksys_e5600 + define Device/linksys_ea7xxx $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 2e280442bf..89a56dff2a 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -47,6 +47,9 @@ gnubee,gb-pc2) ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1" ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2" ;; +linksys,e5600) + ucidef_set_led_netdev "wan" "wan link" "blue:wan" "wan" "link" + ;; linksys,ea7300-v1|\ linksys,ea7300-v2|\ linksys,ea7500-v2) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index f5b075f1f4..40f1bfaecd 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -128,6 +128,7 @@ ramips_setup_macs() zbtlink,zbt-wg3526-32m) label_mac=$(mtd_get_mac_binary factory 0x4) ;; + linksys,e5600|\ linksys,ea7300-v1|\ linksys,ea7300-v2|\ linksys,ea7500-v2) diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 427bde4e38..49b7f23ce9 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -18,6 +18,7 @@ case "$board" in [ "$PHYNBR" = "1" ] && \ macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" > /sys${DEVPATH}/macaddress ;; + linksys,e5600|\ linksys,ea7300-v1|\ linksys,ea7300-v2|\ linksys,ea7500-v2) diff --git a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount index a155458d3f..cfaa62485c 100755 --- a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount +++ b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount @@ -8,6 +8,7 @@ boot() { [ -n "$(fw_printenv bootcount bootchanged 2>/dev/null)" ] &&\ echo -e "bootcount\nbootchanged\n" | /usr/sbin/fw_setenv -s - ;; + linksys,e5600|\ linksys,ea7300-v1|\ linksys,ea7300-v2|\ linksys,ea7500-v2) diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 98e429fdbf..7b57ee7776 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -50,6 +50,7 @@ platform_do_upgrade() { dlink,dir-2660-a1|\ hiwifi,hc5962|\ jcg,q20|\ + linksys,e5600|\ linksys,ea7300-v1|\ linksys,ea7300-v2|\ linksys,ea7500-v2|\ |