aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/diag.sh3
-rw-r--r--target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom1
-rwxr-xr-xtarget/linux/ramips/base-files/etc/uci-defaults/network9
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h1
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig5
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile2
-rw-r--r--target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c154
-rw-r--r--target/linux/ramips/image/Makefile10
-rw-r--r--target/linux/ramips/rt288x/config-2.6.391
11 files changed, 189 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index edb8376cdd..652787b3d4 100755
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -66,6 +66,9 @@ get_status_led() {
whr-g300n)
status_led="whr-g300n:green:router"
;;
+ wli-tx4-ag300n)
+ status_led="buffalo:blue:power"
+ ;;
wl-351)
status_led="wl-351:amber:power"
;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
index a1d4887ecb..55c577e27f 100644
--- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
+++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom
@@ -60,6 +60,7 @@ case "$FIRMWARE" in
wcr-150gn | \
whr-g300n | \
wl-351 | \
+ wli-tx4-ag300n | \
wr512-3gn)
rt2x00_eeprom_extract "factory" 0 272
;;
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 60dd716080..834a2a7d90 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -30,6 +30,10 @@ ramips_setup_interfaces()
ucidef_add_switch_vlan "rtl8366rb" "2" "4 5t"
;;
+ wli-tx4-ag300n)
+ ucidef_set_interface_lan "eth0"
+ ;;
+
rt-n15)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "rtl8366s" "1" "1"
@@ -81,6 +85,11 @@ ramips_setup_macs()
lan_mac=$(ramips_get_mac_binary factory 4)
wan_mac=$(ramips_get_mac_binary factory 40)
;;
+
+ wli-tx4-ag300n)
+ lan_mac=$(ramips_get_mac_binary factory 4)
+ ;;
+
esac
[ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 4dc10aeb22..d197fcedca 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -107,6 +107,9 @@ ramips_board_name() {
*"Sitecom WL-351 v1 002")
name="wl-351"
;;
+ *"WLI-TX4-AG300N")
+ name="wli-tx4-ag300n"
+ ;;
*"WZR-AGL300NH")
name="wzr-agl300nh"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 03a1e7b100..aebaf3879e 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -27,6 +27,7 @@ platform_check_image() {
rt-g32-b1 | \
rt-n15 | \
v22rw-2x2 | \
+ wli-tx4-ag300n | \
whr-g300n)
[ "$magic" != "2705" ] && {
echo "Invalid image type."
diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
index 712976082b..9e48b5caae 100644
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/machine.h
@@ -15,6 +15,7 @@ enum ramips_mach_type {
RAMIPS_MACH_GENERIC,
/* RT2880 based machines */
RAMIPS_MACH_RT_N15, /* Asus RT-N15 */
+ RAMIPS_MACH_WLI_TX4_AG300N, /* Buffalo WLI-TX4-AG300N */
RAMIPS_MACH_WZR_AGL300NH, /* Buffalo WZR-AGL300NH */
/* RT3050 based machines */
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
index 0fc7788302..c30b3ad1d9 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Kconfig
@@ -7,6 +7,11 @@ config RT288X_MACH_RT_N15
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
+config RT288X_MACH_WLI_TX4_AG300N
+ bool "Buffalo WLI-TX4-AG300N board support"
+ select RALINK_DEV_GPIO_BUTTONS
+ select RALINK_DEV_GPIO_LEDS
+
config RT288X_MACH_WZR_AGL300NH
bool "Buffalo WZR-AGL300NH board support"
select RALINK_DEV_GPIO_LEDS
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
index 103081aaa7..ab707018d2 100644
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/Makefile
@@ -14,5 +14,5 @@ obj-y := irq.o setup.o rt288x.o devices.o clock.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_RT288X_MACH_RT_N15) += mach-rt-n15.o
-
+obj-$(CONFIG_RT288X_MACH_WLI_TX4_AG300N) += mach-wli-tx4-ag300n.o
obj-$(CONFIG_RT288X_MACH_WZR_AGL300NH) += mach-wzr-agl300nh.o
diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c
new file mode 100644
index 0000000000..0f200ea298
--- /dev/null
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wli-tx4-ag300n.c
@@ -0,0 +1,154 @@
+/*
+ * Buffalo WLI-TX4-AG300N board support
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/ethtool.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-ralink/machine.h>
+#include <asm/mach-ralink/dev-gpio-buttons.h>
+#include <asm/mach-ralink/dev-gpio-leds.h>
+#include <asm/mach-ralink/rt288x.h>
+#include <asm/mach-ralink/rt288x_regs.h>
+#include <asm/mach-ralink/ramips_eth_platform.h>
+
+#include "devices.h"
+
+#define WLI_TX4_AG300N_GPIO_LED_DIAG 10
+#define WLI_TX4_AG300N_GPIO_LED_POWER 12
+#define WLI_TX4_AG300N_GPIO_LED_SECURITY 13
+
+#define WLI_TX4_AG300N_GPIO_BUTTON_AOSS 0
+#define WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH 8
+#define WLI_TX4_AG300N_GPIO_BUTTON_RESET 9
+
+#define WLI_TX4_AG300N_BUTTONS_POLL_INTERVAL 20
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition wli_tx4_ag300n_partitions[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = 0x030000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "u-boot-env",
+ .offset = 0x030000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "factory",
+ .offset = 0x040000,
+ .size = 0x010000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ {
+ .name = "kernel",
+ .offset = 0x050000,
+ .size = 0x0d0000,
+ },
+ {
+ .name = "rootfs",
+ .offset = 0x120000,
+ .size = 0x2d0000,
+ },
+ {
+ .name = "user",
+ .offset = 0x3f0000,
+ .size = 0x010000,
+ },
+ {
+ .name = "firmware",
+ .offset = 0x050000,
+ .size = 0x3a0000,
+ },
+};
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct physmap_flash_data wli_tx4_ag300n_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+ .nr_parts = ARRAY_SIZE(wli_tx4_ag300n_partitions),
+ .parts = wli_tx4_ag300n_partitions,
+#endif
+};
+
+static struct gpio_led wli_tx4_ag300n_leds_gpio[] __initdata = {
+ {
+ .name = "buffalo:blue:power",
+ .gpio = WLI_TX4_AG300N_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:red:diag",
+ .gpio = WLI_TX4_AG300N_GPIO_LED_DIAG,
+ .active_low = 1,
+ },
+ {
+ .name = "buffalo:blue:security",
+ .gpio = WLI_TX4_AG300N_GPIO_LED_SECURITY,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_button wli_tx4_ag300n_gpio_buttons[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .threshold = 3,
+ .gpio = WLI_TX4_AG300N_GPIO_BUTTON_RESET,
+ .active_low = 1,
+ },
+ {
+ .desc = "AOSS button",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .threshold = 3,
+ .gpio = WLI_TX4_AG300N_GPIO_BUTTON_AOSS,
+ .active_low = 1,
+ },
+ {
+ .desc = "Bandwidth switch",
+ .type = EV_KEY,
+ .code = BTN_0,
+ .threshold = 3,
+ .gpio = WLI_TX4_AG300N_GPIO_BUTTON_BW_SWITCH,
+ .active_low = 0,
+ },
+};
+
+static void __init wli_tx4_ag300n_init(void)
+{
+ rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
+
+ ramips_register_gpio_leds(-1, ARRAY_SIZE(wli_tx4_ag300n_leds_gpio),
+ wli_tx4_ag300n_leds_gpio);
+ ramips_register_gpio_buttons(-1, WLI_TX4_AG300N_BUTTONS_POLL_INTERVAL,
+ ARRAY_SIZE(wli_tx4_ag300n_gpio_buttons),
+ wli_tx4_ag300n_gpio_buttons);
+
+ rt288x_register_flash(0, &wli_tx4_ag300n_flash_data);
+ rt288x_register_wifi();
+ rt288x_register_wdt();
+
+ rt288x_eth_data.speed = SPEED_100;
+ rt288x_eth_data.duplex = DUPLEX_FULL;
+ rt288x_eth_data.tx_fc = 1;
+ rt288x_eth_data.rx_fc = 1;
+ rt288x_register_ethernet();
+}
+
+MIPS_MACHINE(RAMIPS_MACH_WLI_TX4_AG300N, "WLI-TX4-AG300N",
+ "Buffalo WLI-TX4-AG300N", wli_tx4_ag300n_init);
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 8f4e211255..a2845fd578 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -89,6 +89,10 @@ define BuildFirmware/Buffalo
fi; fi
endef
+define BuildFirmware/Buffalo2
+ $(call BuildFirmware/Generic,$(1),$(2),board=$(3),$($(4)),$(5),$(6))
+endef
+
define BuildFirmware/NW718
$(call PatchKernelLzma,$(2),$(3) $($(4)))
mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \
@@ -284,9 +288,15 @@ define Image/Build/Profile/RTN15
$(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15)
endef
+mtdlayout_wlitx4ag300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2880k(rootfs),64k(user)ro,3712k@0x50000(firmware)
+define Image/Build/Profile/WLITX4AG300N
+ $(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,mtdlayout_wlitx4ag300n,851968,2949120)
+endef
+
ifeq ($(CONFIG_RALINK_RT288X),y)
define Image/Build/Profile/Default
$(call Image/Build/Profile/RTN15,$(1))
+ $(call Image/Build/Profile/WLITX4AG300N,$(1))
endef
endif
diff --git a/target/linux/ramips/rt288x/config-2.6.39 b/target/linux/ramips/rt288x/config-2.6.39
index 3936c066d6..a5fead5827 100644
--- a/target/linux/ramips/rt288x/config-2.6.39
+++ b/target/linux/ramips/rt288x/config-2.6.39
@@ -93,6 +93,7 @@ CONFIG_RALINK_RT288X=y
# CONFIG_RALINK_RT305X is not set
CONFIG_RAMIPS_WDT=y
CONFIG_RT288X_MACH_RT_N15=y
+CONFIG_RT288X_MACH_WLI_TX4_AG300N=y
CONFIG_RT288X_MACH_WZR_AGL300NH=y
CONFIG_RTL8366S_PHY=y
CONFIG_RTL8366_SMI=y