aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/kirkwood/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/kirkwood/config-5.411
-rw-r--r--target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts71
-rw-r--r--target/linux/kirkwood/image/Makefile4
-rw-r--r--target/linux/kirkwood/patches-5.4/105-ea4500.patch45
-rw-r--r--target/linux/kirkwood/profiles/00-default.mk2
6 files changed, 68 insertions, 69 deletions
diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network
index 15e51d88f2..df01b0bb1b 100755
--- a/target/linux/kirkwood/base-files/etc/board.d/02_network
+++ b/target/linux/kirkwood/base-files/etc/board.d/02_network
@@ -26,8 +26,8 @@ case "$board" in
;;
"linksys,audi"|\
"linksys,viper")
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" "6@eth1"
+ ucidef_set_interfaces_lan_wan "ethernet1 ethernet2 ethernet3 ethernet4" "internet"
+ ucidef_set_interface_macaddr "wan" $( mtd_get_mac_ascii u_env eth1addr )
;;
"zyxel,nsa310b"|\
"zyxel,nsa325")
diff --git a/target/linux/kirkwood/config-5.4 b/target/linux/kirkwood/config-5.4
index e149631f0e..c14ca3778f 100644
--- a/target/linux/kirkwood/config-5.4
+++ b/target/linux/kirkwood/config-5.4
@@ -245,10 +245,17 @@ CONFIG_MVEBU_MBUS=y
CONFIG_MVMDIO=y
# CONFIG_MVNETA is not set
# CONFIG_MVPP2 is not set
-CONFIG_MVSW61XX_PHY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_KUSER_HELPERS=y
CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MV88E6XXX=y
+CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
+# CONFIG_NET_DSA_MV88E6XXX_PTP is not set
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+CONFIG_NET_SWITCHDEV=y
CONFIG_NLS=y
CONFIG_NVMEM=y
# CONFIG_NVMEM_REBOOT_MODE is not set
@@ -276,6 +283,7 @@ CONFIG_PCI_MVEBU=y
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
# CONFIG_PHY_MVEBU_A3700_UTMI is not set
# CONFIG_PHY_MVEBU_A38X_COMPHY is not set
CONFIG_PHY_MVEBU_SATA=y
@@ -317,7 +325,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_SRAM=y
CONFIG_SRAM_EXEC=y
CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
CONFIG_SWPHY=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_THERMAL=y
diff --git a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts
index eff9102d33..90250fefc8 100644
--- a/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts
+++ b/target/linux/kirkwood/files-5.4/arch/arm/boot/dts/kirkwood-linksys-audi.dts
@@ -66,17 +66,6 @@
default-state = "on";
};
};
-
- mvsw61xx {
- compatible = "marvell,88e6171";
- status = "okay";
- reg = <0x10>;
-
- mii-bus = <&mdio>;
- cpu-port-0 = <5>;
- cpu-port-1 = <6>;
- is-indirect;
- };
};
&pinctrl {
@@ -96,6 +85,57 @@
};
};
+&mdio {
+ status = "okay";
+
+ switch@10 {
+ compatible = "marvell,mv88e6085";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <16>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "ethernet1";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "ethernet2";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "ethernet3";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "ethernet4";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "internet";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&eth0port>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
&nand {
status = "okay";
@@ -188,15 +228,10 @@
};
/* eth1 is connected to the switch at port 6. However DSA only supports a
- * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
+ * single CPU port. This port is disabled to avoid confusion.
*/
&eth1 {
- status = "okay";
-
- ethernet1-port@0 {
- speed = <1000>;
- duplex = <1>;
- };
+ status = "disabled";
};
/* There is no battery on the board, so the RTC does not keep
diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile
index 865122ae19..4ba9f9a1b2 100644
--- a/target/linux/kirkwood/image/Makefile
+++ b/target/linux/kirkwood/image/Makefile
@@ -82,7 +82,7 @@ TARGET_DEVICES += iom_ix2-200
define Device/linksys_audi
DEVICE_VENDOR := Linksys
DEVICE_MODEL := EA3500 (Audi)
- DEVICE_PACKAGES := kmod-mwl8k swconfig wpad-basic kmod-gpio-button-hotplug
+ DEVICE_PACKAGES := kmod-mwl8k wpad-basic kmod-gpio-button-hotplug
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
@@ -97,7 +97,7 @@ TARGET_DEVICES += linksys_audi
define Device/linksys_viper
DEVICE_VENDOR := Linksys
DEVICE_MODEL := E4200v2 / EA4500 (Viper)
- DEVICE_PACKAGES := kmod-mwl8k swconfig wpad-basic kmod-gpio-button-hotplug
+ DEVICE_PACKAGES := kmod-mwl8k wpad-basic kmod-gpio-button-hotplug
KERNEL_SIZE := 2688k
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
diff --git a/target/linux/kirkwood/patches-5.4/105-ea4500.patch b/target/linux/kirkwood/patches-5.4/105-ea4500.patch
index 7302723029..0d97ad14a2 100644
--- a/target/linux/kirkwood/patches-5.4/105-ea4500.patch
+++ b/target/linux/kirkwood/patches-5.4/105-ea4500.patch
@@ -23,25 +23,7 @@
};
white-pulse {
-@@ -66,6 +71,17 @@
- gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
- };
- };
-+
-+ mvsw61xx@10 {
-+ compatible = "marvell,88e6171";
-+ status = "okay";
-+ reg = <0x10>;
-+
-+ mii-bus = <&mdio>;
-+ cpu-port-0 = <5>;
-+ cpu-port-1 = <6>;
-+ is-indirect;
-+ };
- };
-
- &pinctrl {
-@@ -114,22 +130,22 @@
+@@ -114,22 +119,22 @@
};
partition@200000 {
@@ -68,28 +50,3 @@
reg = <0x1EA0000 0x1760000>;
};
-@@ -162,6 +178,7 @@
- status = "okay";
-
- switch@10 {
-+ status = "disabled";
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
-@@ -225,10 +242,14 @@
- };
-
- /* eth1 is connected to the switch at port 6. However DSA only supports a
-- * single CPU port. So leave this port disabled to avoid confusion.
-+ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
- */
- &eth1 {
-- status = "disabled";
-+ status = "okay";
-+ ethernet1-port@0 {
-+ speed = <1000>;
-+ duplex = <1>;
-+ };
- };
-
- /* There is no battery on the board, so the RTC does not keep
diff --git a/target/linux/kirkwood/profiles/00-default.mk b/target/linux/kirkwood/profiles/00-default.mk
index 002751714e..bfc2154c48 100644
--- a/target/linux/kirkwood/profiles/00-default.mk
+++ b/target/linux/kirkwood/profiles/00-default.mk
@@ -7,7 +7,7 @@
define Profile/Default
NAME:=Default Profile
- PACKAGES:=kmod-mwl8k swconfig wpad-basic
+ PACKAGES:=kmod-mwl8k wpad-basic
PRIORITY:=1
endef