diff options
Diffstat (limited to 'target/linux')
| -rw-r--r-- | target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata | 2 | ||||
| -rw-r--r-- | target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts | 31 |
2 files changed, 31 insertions, 2 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 9cdbaa3d4e..246bc6ca21 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -76,7 +76,6 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; cellc,rtl30vw |\ - plasmacloud,pa1200 |\ plasmacloud,pa2200) caldata_extract "0:ART" 0x1000 0x2f20 ;; @@ -171,7 +170,6 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; cellc,rtl30vw |\ - plasmacloud,pa1200 |\ plasmacloud,pa2200) caldata_extract "0:ART" 0x5000 0x2f20 ;; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts index 4e08dd39d0..dac4adbd5f 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-pa1200.dts @@ -140,7 +140,32 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <24000000>; + /* partitions are passed via bootloader */ + partitions { + partition-art { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + label = "0:ART"; + + precal_art_1000: precal@1000 { + reg = <0x1000 0x2f20>; + }; + + precal_art_5000: precal@5000 { + reg = <0x5000 0x2f20>; + }; + + macaddr_gmac0: macaddr@0 { + reg = <0x0 0x6>; + }; + + macaddr_gmac1: macaddr@6 { + reg = <0x6 0x6>; + }; + }; + }; }; }; @@ -161,9 +186,15 @@ &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200"; + + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_1000>; }; &wifi1 { status = "okay"; qcom,ath10k-calibration-variant = "PlasmaCloud-PA1200"; + + nvmem-cell-names = "pre-calibration"; + nvmem-cells = <&precal_art_5000>; }; |