diff options
Diffstat (limited to 'target/linux')
-rw-r--r-- | target/linux/ramips/dts/mt7621_linksys_re7000.dts | 154 | ||||
-rw-r--r-- | target/linux/ramips/image/mt7621.mk | 9 | ||||
-rw-r--r-- | target/linux/ramips/mt7621/base-files/etc/board.d/02_network | 1 |
3 files changed, 164 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_linksys_re7000.dts b/target/linux/ramips/dts/mt7621_linksys_re7000.dts new file mode 100644 index 0000000000..5e33f48915 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_linksys_re7000.dts @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "linksys,re7000", "mediatek,mt7621-soc"; + model = "Linksys RE7000"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + leds { + compatible = "gpio-leds"; + + wifi { + label = "orange:wifi"; + gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + wps { + label = "orange:wps"; + gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; + }; + + led_power: power { + label = "green:power"; + gpios = <&gpio 25 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + reset { + label = "reset"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x1000>; + }; + + partition@32000 { + label = "config"; + reg = <0x32000 0xe000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "uart2", "rgmii2"; + function = "gpio"; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + ieee80211-freq-limit = <2400000 2500000>; + }; +}; + +&pcie1 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_2e>; + nvmem-cell-names = "mac-address"; +}; + +ðernet { + pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan"; + }; + }; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_2e: macaddr@2e { + reg = <0x2e 0x6>; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index d33937a8d7..582d53c423 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1541,6 +1541,15 @@ define Device/linksys_re6500 endef TARGET_DEVICES += linksys_re6500 +define Device/linksys_re7000 + $(Device/uimage-lzma-loader) + IMAGE_SIZE := 16064k + DEVICE_VENDOR := Linksys + DEVICE_MODEL := RE7000 + DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware +endef +TARGET_DEVICES += linksys_re7000 + define Device/mediatek_ap-mt7621a-v60 $(Device/dsa-migration) IMAGE_SIZE := 7872k diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index a986e9bac9..5b7cc7f2ca 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -17,6 +17,7 @@ ramips_setup_interfaces() dlink,dap-1620-b1|\ dlink,dap-x1860-a1|\ edimax,re23s|\ + linksys,re7000|\ mikrotik,ltap-2hnd|\ mikrotik,routerboard-m11g|\ netgear,ex6150|\ |