diff options
Diffstat (limited to 'target/linux')
6 files changed, 1955 insertions, 530 deletions
diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/Makefile b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/Makefile index 52cc151a56..016184c3d9 100644 --- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/Makefile +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/Makefile @@ -1,3 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_NET_DSA_RTL83XX) += common.o dsa.o \ - rtl838x.o rtl839x.o storm.o debugfs.o + rtl838x.o rtl839x.o rtl930x.o rtl931x.o debugfs.o qos.o diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/qos.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/qos.c new file mode 100644 index 0000000000..2fc8d37f3e --- /dev/null +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/qos.c @@ -0,0 +1,576 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include <net/dsa.h> +#include <linux/delay.h> + +#include <asm/mach-rtl838x/mach-rtl83xx.h> +#include "rtl83xx.h" + +static struct rtl838x_switch_priv *switch_priv; +extern struct rtl83xx_soc_info soc_info; + +enum scheduler_type { + WEIGHTED_FAIR_QUEUE = 0, + WEIGHTED_ROUND_ROBIN, +}; + +int max_available_queue[] = {0, 1, 2, 3, 4, 5, 6, 7}; +int default_queue_weights[] = {1, 1, 1, 1, 1, 1, 1, 1}; +int dot1p_priority_remapping[] = {0, 1, 2, 3, 4, 5, 6, 7}; + +static void rtl839x_read_scheduling_table(int port) +{ + u32 cmd = 1 << 9 /* Execute cmd */ + | 0 << 8 /* Read */ + | 0 << 6 /* Table type 0b00 */ + | (port & 0x3f); + rtl839x_exec_tbl2_cmd(cmd); +} + +static void rtl839x_write_scheduling_table(int port) +{ + u32 cmd = 1 << 9 /* Execute cmd */ + | 1 << 8 /* Write */ + | 0 << 6 /* Table type 0b00 */ + | (port & 0x3f); + rtl839x_exec_tbl2_cmd(cmd); +} + +static void rtl839x_read_out_q_table(int port) +{ + u32 cmd = 1 << 9 /* Execute cmd */ + | 0 << 8 /* Read */ + | 2 << 6 /* Table type 0b10 */ + | (port & 0x3f); + rtl839x_exec_tbl2_cmd(cmd); +} + +static void rtl838x_storm_enable(struct rtl838x_switch_priv *priv, int port, bool enable) +{ + // Enable Storm control for that port for UC, MC, and BC + if (enable) + sw_w32(0x7, RTL838X_STORM_CTRL_LB_CTRL(port)); + else + sw_w32(0x0, RTL838X_STORM_CTRL_LB_CTRL(port)); +} + +u32 rtl838x_get_egress_rate(struct rtl838x_switch_priv *priv, int port) +{ + u32 rate; + + if (port > priv->cpu_port) + return 0; + rate = sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port)) & 0x3fff; + return rate; +} + +/* Sets the rate limit, 10MBit/s is equal to a rate value of 625 */ +int rtl838x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate) +{ + u32 old_rate; + + if (port > priv->cpu_port) + return -1; + + old_rate = sw_r32(RTL838X_SCHED_P_EGR_RATE_CTRL(port)); + sw_w32(rate, RTL838X_SCHED_P_EGR_RATE_CTRL(port)); + + return old_rate; +} + +/* Set the rate limit for a particular queue in Bits/s + * units of the rate is 16Kbps + */ +void rtl838x_egress_rate_queue_limit(struct rtl838x_switch_priv *priv, int port, + int queue, u32 rate) +{ + if (port > priv->cpu_port) + return; + if (queue > 7) + return; + sw_w32(rate, RTL838X_SCHED_Q_EGR_RATE_CTRL(port, queue)); +} + +static void rtl838x_rate_control_init(struct rtl838x_switch_priv *priv) +{ + int i; + + pr_info("Enabling Storm control\n"); + // TICK_PERIOD_PPS + if (priv->id == 0x8380) + sw_w32_mask(0x3ff << 20, 434 << 20, RTL838X_SCHED_LB_TICK_TKN_CTRL_0); + + // Set burst rate + sw_w32(0x00008000, RTL838X_STORM_CTRL_BURST_0); // UC + sw_w32(0x80008000, RTL838X_STORM_CTRL_BURST_1); // MC and BC + + // Set burst Packets per Second to 32 + sw_w32(0x00000020, RTL838X_STORM_CTRL_BURST_PPS_0); // UC + sw_w32(0x00200020, RTL838X_STORM_CTRL_BURST_PPS_1); // MC and BC + + // Include IFG in storm control, rate based on bytes/s (0 = packets) + sw_w32_mask(0, 1 << 6 | 1 << 5, RTL838X_STORM_CTRL); + // Bandwidth control includes preamble and IFG (10 Bytes) + sw_w32_mask(0, 1, RTL838X_SCHED_CTRL); + + // On SoCs except RTL8382M, set burst size of port egress + if (priv->id != 0x8382) + sw_w32_mask(0xffff, 0x800, RTL838X_SCHED_LB_THR); + + /* Enable storm control on all ports with a PHY and limit rates, + * for UC and MC for both known and unknown addresses */ + for (i = 0; i < priv->cpu_port; i++) { + if (priv->ports[i].phy) { + sw_w32((1 << 18) | 0x8000, RTL838X_STORM_CTRL_PORT_UC(i)); + sw_w32((1 << 18) | 0x8000, RTL838X_STORM_CTRL_PORT_MC(i)); + sw_w32(0x8000, RTL838X_STORM_CTRL_PORT_BC(i)); + rtl838x_storm_enable(priv, i, true); + } + } + + // Attack prevention, enable all attack prevention measures + //sw_w32(0x1ffff, RTL838X_ATK_PRVNT_CTRL); + /* Attack prevention, drop (bit = 0) problematic packets on all ports. + * Setting bit = 1 means: trap to CPU + */ + //sw_w32(0, RTL838X_ATK_PRVNT_ACT); + // Enable attack prevention on all ports + //sw_w32(0x0fffffff, RTL838X_ATK_PRVNT_PORT_EN); +} + +/* Sets the rate limit, 10MBit/s is equal to a rate value of 625 */ +u32 rtl839x_get_egress_rate(struct rtl838x_switch_priv *priv, int port) +{ + u32 rate; + + pr_debug("%s: Getting egress rate on port %d to %d\n", __func__, port, rate); + if (port >= priv->cpu_port) + return 0; + + mutex_lock(&priv->reg_mutex); + + rtl839x_read_scheduling_table(port); + + rate = sw_r32(RTL839X_TBL_ACCESS_DATA_2(7)); + rate <<= 12; + rate |= sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)) >> 20; + + mutex_unlock(&priv->reg_mutex); + + return rate; +} + +/* Sets the rate limit, 10MBit/s is equal to a rate value of 625, returns previous rate */ +int rtl839x_set_egress_rate(struct rtl838x_switch_priv *priv, int port, u32 rate) +{ + u32 old_rate; + + pr_debug("%s: Setting egress rate on port %d to %d\n", __func__, port, rate); + if (port >= priv->cpu_port) + return -1; + + mutex_lock(&priv->reg_mutex); + + rtl839x_read_scheduling_table(port); + + old_rate = sw_r32(RTL839X_TBL_ACCESS_DATA_2(7)) & 0xff; + old_rate <<= 12; + old_rate |= sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)) >> 20; + sw_w32_mask(0xff, (rate >> 12) & 0xff, RTL839X_TBL_ACCESS_DATA_2(7)); + sw_w32_mask(0xfff << 20, rate << 20, RTL839X_TBL_ACCESS_DATA_2(8)); + + rtl839x_write_scheduling_table(port); + + mutex_unlock(&priv->reg_mutex); + + return old_rate; +} + +/* Set the rate limit for a particular queue in Bits/s + * units of the rate is 16Kbps + */ +void rtl839x_egress_rate_queue_limit(struct rtl838x_switch_priv *priv, int port, + int queue, u32 rate) +{ + int lsb = 128 + queue * 20; + int low_byte = 8 - (lsb >> 5); + int start_bit = lsb - (low_byte << 5); + u32 high_mask = 0xfffff >> (32 - start_bit); + + pr_debug("%s: Setting egress rate on port %d, queue %d to %d\n", + __func__, port, queue, rate); + if (port >= priv->cpu_port) + return; + if (queue > 7) + return; + + mutex_lock(&priv->reg_mutex); + + rtl839x_read_scheduling_table(port); + + sw_w32_mask(0xfffff << start_bit, (rate & 0xfffff) << start_bit, + RTL839X_TBL_ACCESS_DATA_2(low_byte)); + if (high_mask) + sw_w32_mask(high_mask, (rate & 0xfffff) >> (32- start_bit), + RTL839X_TBL_ACCESS_DATA_2(low_byte - 1)); + + rtl839x_write_scheduling_table(port); + + mutex_unlock(&priv->reg_mutex); +} + +static void rtl839x_rate_control_init(struct rtl838x_switch_priv *priv) +{ + int p, q; + + pr_info("%s: enabling rate control\n", __func__); + /* Tick length and token size settings for SoC with 250MHz, + * RTL8350 family would use 50MHz + */ + // Set the special tick period + sw_w32(976563, RTL839X_STORM_CTRL_SPCL_LB_TICK_TKN_CTRL); + // Ingress tick period and token length 10G + sw_w32(18 << 11 | 151, RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_0); + // Ingress tick period and token length 1G + sw_w32(245 << 11 | 129, RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_1); + // Egress tick period 10G, bytes/token 10G and tick period 1G, bytes/token 1G + sw_w32(18 << 24 | 151 << 16 | 185 << 8 | 97, RTL839X_SCHED_LB_TICK_TKN_CTRL); + // Set the tick period of the CPU and the Token Len + sw_w32(3815 << 8 | 1, RTL839X_SCHED_LB_TICK_TKN_PPS_CTRL); + + // Set the Weighted Fair Queueing burst size + sw_w32_mask(0xffff, 4500, RTL839X_SCHED_LB_THR); + + // Storm-rate calculation is based on bytes/sec (bit 5), include IFG (bit 6) + sw_w32_mask(0, 1 << 5 | 1 << 6, RTL839X_STORM_CTRL); + + /* Based on the rate control mode being bytes/s + * set tick period and token length for 10G + */ + sw_w32(18 << 10 | 151, RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_0); + /* and for 1G ports */ + sw_w32(246 << 10 | 129, RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_1); + + /* Set default burst rates on all ports (the same for 1G / 10G) with a PHY + * for UC, MC and BC + * For 1G port, the minimum burst rate is 1700, maximum 65535, + * For 10G ports it is 2650 and 1048575 respectively */ + for (p = 0; p < priv->cpu_port; p++) { + if (priv->ports[p].phy && !priv->ports[p].is10G) { + sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_UC_1(p)); + sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_MC_1(p)); + sw_w32_mask(0xffff, 0x8000, RTL839X_STORM_CTRL_PORT_BC_1(p)); + } + } + + /* Setup ingress/egress per-port rate control */ + for (p = 0; p < priv->cpu_port; p++) { + if (!priv->ports[p].phy) + continue; + + if (priv->ports[p].is10G) + rtl839x_set_egress_rate(priv, p, 625000); // 10GB/s + else + rtl839x_set_egress_rate(priv, p, 62500); // 1GB/s + + // Setup queues: all RTL83XX SoCs have 8 queues, maximum rate + for (q = 0; q < 8; q++) + rtl839x_egress_rate_queue_limit(priv, p, q, 0xfffff); + + if (priv->ports[p].is10G) { + // Set high threshold to maximum + sw_w32_mask(0xffff, 0xffff, RTL839X_IGR_BWCTRL_PORT_CTRL_10G_0(p)); + } else { + // Set high threshold to maximum + sw_w32_mask(0xffff, 0xffff, RTL839X_IGR_BWCTRL_PORT_CTRL_1(p)); + } + } + + // Set global ingress low watermark rate + sw_w32(65532, RTL839X_IGR_BWCTRL_CTRL_LB_THR); +} + + + +void rtl838x_setup_prio2queue_matrix(int *min_queues) +{ + int i; + u32 v; + + pr_info("Current Intprio2queue setting: %08x\n", sw_r32(RTL838X_QM_INTPRI2QID_CTRL)); + for (i = 0; i < MAX_PRIOS; i++) + v |= i << (min_queues[i] * 3); + sw_w32(v, RTL838X_QM_INTPRI2QID_CTRL); +} + +void rtl839x_setup_prio2queue_matrix(int *min_queues) +{ + int i, q; + + pr_info("Current Intprio2queue setting: %08x\n", sw_r32(RTL839X_QM_INTPRI2QID_CTRL(0))); + for (i = 0; i < MAX_PRIOS; i++) { + q = min_queues[i]; + sw_w32(i << (q * 3), RTL839X_QM_INTPRI2QID_CTRL(q)); + } +} + +/* Sets the CPU queue depending on the internal priority of a packet */ +void rtl83xx_setup_prio2queue_cpu_matrix(int *max_queues) +{ + int reg = soc_info.family == RTL8380_FAMILY_ID ? RTL838X_QM_PKT2CPU_INTPRI_MAP + : RTL839X_QM_PKT2CPU_INTPRI_MAP; + int i; + u32 v; + + pr_info("QM_PKT2CPU_INTPRI_MAP: %08x\n", sw_r32(reg)); + for (i = 0; i < MAX_PRIOS; i++) + v |= max_queues[i] << (i * 3); + sw_w32(v, reg); +} + +void rtl83xx_setup_default_prio2queue(void) +{ + if (soc_info.family == RTL8380_FAMILY_ID) { + rtl838x_setup_prio2queue_matrix(max_available_queue); + } else { + rtl839x_setup_prio2queue_matrix(max_available_queue); + } + rtl83xx_setup_prio2queue_cpu_matrix(max_available_queue); +} + +/* Sets the output queue assigned to a port, the port can be the CPU-port */ +void rtl839x_set_egress_queue(int port, int queue) +{ + sw_w32(queue << ((port % 10) *3), RTL839X_QM_PORT_QNUM(port)); +} + +/* Sets the priority assigned of an ingress port, the port can be the CPU-port */ +void rtl83xx_set_ingress_priority(int port, int priority) +{ + if (soc_info.family == RTL8380_FAMILY_ID) + sw_w32(priority << ((port % 10) *3), RTL838X_PRI_SEL_PORT_PRI(port)); + else + sw_w32(priority << ((port % 10) *3), RTL839X_PRI_SEL_PORT_PRI(port)); + +} + +int rtl839x_get_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port) +{ + u32 v; + + mutex_lock(&priv->reg_mutex); + + rtl839x_read_scheduling_table(port); + v = sw_r32(RTL839X_TBL_ACCESS_DATA_2(8)); + + mutex_unlock(&priv->reg_mutex); + + if (v & BIT(19)) + return WEIGHTED_ROUND_ROBIN; + return WEIGHTED_FAIR_QUEUE; +} + +void rtl839x_set_scheduling_algorithm(struct rtl838x_switch_priv *priv, int port, + enum scheduler_type sched) +{ + enum scheduler_type t = rtl839x_get_scheduling_algorithm(priv, port); + u32 v, oam_state, oam_port_state; + u32 count; + int i, egress_rate; + + mutex_lock(&priv->reg_mutex); + /* Check whether we need to empty the egress queue of that port due to Errata E0014503 */ + if (sched == WEIGHTED_FAIR_QUEUE && t == WEIGHTED_ROUND_ROBIN && port != priv->cpu_port) { + // Read Operations, Adminstatrion and Management control register + oam_state = sw_r32(RTL839X_OAM_CTRL); + + // Get current OAM state + oam_port_state = sw_r32(RTL839X_OAM_PORT_ACT_CTRL(port)); + + // Disable OAM to block traffice + v = sw_r32(RTL839X_OAM_CTRL); + sw_w32_mask(0, 1, RTL839X_OAM_CTRL); + v = sw_r32(RTL839X_OAM_CTRL); + + // Set to trap action OAM forward (bits 1, 2) and OAM Mux Action Drop (bit 0) + sw_w32(0x2, RTL839X_OAM_PORT_ACT_CTRL(port)); + + // Set port egress rate to unlimited + egress_rate = rtl839x_set_egress_rate(priv, port, 0xFFFFF); + + // Wait until the egress used page count of that port is 0 + i = 0; + do { + usleep_range(100, 200); + rtl839x_read_out_q_table(port); + count = sw_r32(RTL839X_TBL_ACCESS_DATA_2(6)); + count >>= 20; + i++; + } while (i < 3500 && count > 0); + } + + // Actually set the scheduling algorithm + rtl839x_read_scheduling_table(port); + sw_w32_mask(BIT(19), sched ? BIT(19) : 0, RTL839X_TBL_ACCESS_DATA_2(8)); + rtl839x_write_scheduling_table(port); + + if (sched == WEIGHTED_FAIR_QUEUE && t == WEIGHTED_ROUND_ROBIN && port != priv->cpu_port) { + // Restore OAM state to control register + sw_w32(oam_state, RTL839X_OAM_CTRL); + + // Restore trap action state + sw_w32(oam_port_state, RTL839X_OAM_PORT_ACT_CTRL(port)); + + // Restore port egress rate + rtl839x_set_egress_rate(priv, port, egress_rate); + } + + mutex_unlock(&priv->reg_mutex); +} + +void rtl839x_set_scheduling_queue_weights(struct rtl838x_switch_priv *priv, int port, + int *queue_weights) +{ + int i, lsb, low_byte, start_bit, high_mask; + + mutex_lock(&priv->reg_mutex); + + rtl839x_read_scheduling_table(port); + + for (i = 0; i < 8; i++) { + lsb = 48 + i * 8; + low_byte = 8 - (lsb >> 5); + start_bit = lsb - (low_byte << 5); + high_mask = 0x3ff >> (32 - start_bit); + sw_w32_mask(0x3ff << start_bit, (queue_weights[i] & 0x3ff) << start_bit, + RTL839X_TBL_ACCESS_DATA_2(low_byte)); + if (high_mask) + sw_w32_mask(high_mask, (queue_weights[i] & 0x3ff) >> (32- start_bit), + RTL839X_TBL_ACCESS_DATA_2(low_byte - 1)); + } + + rtl839x_write_scheduling_table(port); + mutex_unlock(&priv->reg_mutex); +} + +void rtl838x_config_qos(void) +{ + int i, p; + u32 v; + + pr_info("Setting up RTL838X QoS\n"); + pr_info("RTL838X_PRI_SEL_TBL_CTRL(i): %08x\n", sw_r32(RTL838X_PRI_SEL_TBL_CTRL(0))); + rtl83xx_setup_default_prio2queue(); + + // Enable inner (bit 12) and outer (bit 13) priority remapping from DSCP + sw_w32_mask(0, BIT(12) | BIT(13), RTL838X_PRI_DSCP_INVLD_CTRL0); + + /* Set default weight for calculating internal priority, in prio selection group 0 + * Port based (prio 3), Port outer-tag (4), DSCP (5), Inner Tag (6), Outer Tag (7) + */ + v = 3 | (4 << 3) | (5 << 6) | (6 << 9) | (7 << 12); + sw_w32(v, RTL838X_PRI_SEL_TBL_CTRL(0)); + + // Set the inner and outer priority one-to-one to re-marked outer dot1p priority + v = 0; + for (p = 0; p < 8; p++) + v |= p << (3 * p); + sw_w32(v, RTL838X_RMK_OPRI_CTRL); + sw_w32(v, RTL838X_RMK_IPRI_CTRL); + + v = 0; + for (p = 0; p < 8; p++) + v |= (dot1p_priority_remapping[p] & 0x7) << (p * 3); + sw_w32(v, RTL838X_PRI_SEL_IPRI_REMAP); + + // On all ports set scheduler type to WFQ + for (i = 0; i <= soc_info.cpu_port; i++) + sw_w32(0, RTL838X_SCHED_P_TYPE_CTRL(i)); + + // Enable egress scheduler for CPU-Port + sw_w32_mask(0, BIT(8), RTL838X_SCHED_LB_CTRL(soc_info.cpu_port)); + + // Enable egress drop allways on + sw_w32_mask(0, BIT(11), RTL838X_FC_P_EGR_DROP_CTRL(soc_info.cpu_port)); + + // Give special trap frames priority 7 (BPDUs) and routing exceptions: + sw_w32_mask(0, 7 << 3 | 7, RTL838X_QM_PKT2CPU_INTPRI_2); + // Give RMA frames priority 7: + sw_w32_mask(0, 7, RTL838X_QM_PKT2CPU_INTPRI_1); +} + +void rtl839x_config_qos(void) +{ + int port, p, q; + u32 v; + struct rtl838x_switch_priv *priv = switch_priv; + + pr_info("Setting up RTL839X QoS\n"); + pr_info("RTL839X_PRI_SEL_TBL_CTRL(i): %08x\n", sw_r32(RTL839X_PRI_SEL_TBL_CTRL(0))); + rtl83xx_setup_default_prio2queue(); + + for (port = 0; port < soc_info.cpu_port; port++) + sw_w32(7, RTL839X_QM_PORT_QNUM(port)); + + // CPU-port gets queue number 7 + sw_w32(7, RTL839X_QM_PORT_QNUM(soc_info.cpu_port)); + + for (port = 0; port <= soc_info.cpu_port; port++) { + rtl83xx_set_ingress_priority(port, 0); + rtl839x_set_scheduling_algorithm(priv, port, WEIGHTED_FAIR_QUEUE); + rtl839x_set_scheduling_queue_weights(priv, port, default_queue_weights); + // Do re-marking based on outer tag + sw_w32_mask(0, BIT(port % 32), RTL839X_RMK_PORT_DEI_TAG_CTRL(port)); + } + + // Remap dot1p priorities to internal priority, for this the outer tag needs be re-marked + v = 0; + for (p = 0; p < 8; p++) + v |= (dot1p_priority_remapping[p] & 0x7) << (p * 3); + sw_w32(v, RTL839X_PRI_SEL_IPRI_REMAP); + + /* Configure Drop Precedence for Drop Eligible Indicator (DEI) + * Index 0: 0 + * Index 1: 2 + * Each indicator is 2 bits long + */ + sw_w32(2 << 2, RTL839X_PRI_SEL_DEI2DP_REMAP); + + // Re-mark DEI: 4 bit-fields of 2 bits each, field 0 is bits 0-1, ... + sw_w32((0x1 << 2) | (0x1 << 4), RTL839X_RMK_DEI_CTRL); + + /* Set Congestion avoidance drop probability to 0 for drop precedences 0-2 (bits 24-31) + * low threshold (bits 0-11) to 4095 and high threshold (bits 12-23) to 4095 + * Weighted Random Early Detection (WRED) is used + */ + sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(0)); + sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(1)); + sw_w32(4095 << 12| 4095, RTL839X_WRED_PORT_THR_CTRL(2)); + + /* Set queue-based congestion avoidance properties, register fields are as + * for forward RTL839X_WRED_PORT_THR_CTRL + */ + for (q = 0; q < 8; q++) { + sw_w32(255 << 24 | 78 << 12 | 68, RTL839X_WRED_QUEUE_THR_CTRL(q, 0)); + sw_w32(255 << 24 | 74 << 12 | 64, RTL839X_WRED_QUEUE_THR_CTRL(q, 0)); + sw_w32(255 << 24 | 70 << 12 | 60, RTL839X_WRED_QUEUE_THR_CTRL(q, 0)); + } +} + +void __init rtl83xx_setup_qos(struct rtl838x_switch_priv *priv) +{ + switch_priv = priv; + + pr_info("In %s\n", __func__); + + if (priv->family_id == RTL8380_FAMILY_ID) + return rtl838x_config_qos(); + else if (priv->family_id == RTL8390_FAMILY_ID) + return rtl839x_config_qos(); + + if (priv->family_id == RTL8380_FAMILY_ID) + rtl838x_rate_control_init(priv); + else if (priv->family_id == RTL8390_FAMILY_ID) + rtl839x_rate_control_init(priv); + +} diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.h b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.h index 1ebb4dff72..d5ca153a10 100644 --- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.h +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.h @@ -8,14 +8,18 @@ /* * Register definition */ -#define RTL838X_CPU_PORT 28 -#define RTL839X_CPU_PORT 52 - #define RTL838X_MAC_PORT_CTRL(port) (0xd560 + (((port) << 7))) #define RTL839X_MAC_PORT_CTRL(port) (0x8004 + (((port) << 7))) +#define RTL930X_MAC_PORT_CTRL(port) (0x3260 + (((port) << 6))) +#define RTL930X_MAC_L2_PORT_CTRL(port) (0x3268 + (((port) << 6))) +#define RTL931X_MAC_PORT_CTRL(port) (0x6004 + (((port) << 7))) + #define RTL838X_RST_GLB_CTRL_0 (0x003c) + #define RTL838X_MAC_FORCE_MODE_CTRL (0xa104) #define RTL839X_MAC_FORCE_MODE_CTRL (0x02bc) +#define RTL930X_MAC_FORCE_MODE_CTRL (0xCA1C) +#define RTL931X_MAC_FORCE_MODE_CTRL (0x0DCC) #define RTL838X_DMY_REG31 (0x3b28) #define RTL838X_SDS_MODE_SEL (0x0028) @@ -23,20 +27,25 @@ #define RTL838X_INT_MODE_CTRL (0x005c) #define RTL838X_CHIP_INFO (0x00d8) #define RTL839X_CHIP_INFO (0x0ff4) -#define RTL838X_SDS4_REG28 (0xef80) -#define RTL838X_SDS4_DUMMY0 (0xef8c) -#define RTL838X_SDS5_EXT_REG6 (0xf18c) #define RTL838X_PORT_ISO_CTRL(port) (0x4100 + ((port) << 2)) #define RTL839X_PORT_ISO_CTRL(port) (0x1400 + ((port) << 3)) -#define RTL8380_SDS4_FIB_REG0 (0xF800) + +/* Packet statistics */ #define RTL838X_STAT_PORT_STD_MIB (0x1200) #define RTL839X_STAT_PORT_STD_MIB (0xC000) +#define RTL930X_STAT_PORT_MIB_CNTR (0x0664) #define RTL838X_STAT_RST (0x3100) #define RTL839X_STAT_RST (0xF504) +#define RTL930X_STAT_RST (0x3240) +#define RTL931X_STAT_RST (0x7ef4) #define RTL838X_STAT_PORT_RST (0x3104) #define RTL839X_STAT_PORT_RST (0xF508) +#define RTL930X_STAT_PORT_RST (0x3244) +#define RTL931X_STAT_PORT_RST (0x7ef8) #define RTL838X_STAT_CTRL (0x3108) #define RTL839X_STAT_CTRL (0x04cc) +#define RTL930X_STAT_CTRL (0x3248) +#define RTL931X_STAT_CTRL (0x5720) /* Registers of the internal Serdes of the 8390 */ #define RTL8390_SDS0_1_XSG0 (0xA000) @@ -47,53 +56,95 @@ #define RTL839X_SDS12_13_PWR1 (0xb980) /* Registers of the internal Serdes of the 8380 */ -#define MAPLE_SDS4_REG0r RTL838X_SDS4_REG28 -#define MAPLE_SDS5_REG0r (RTL838X_SDS4_REG28 + 0x100) -#define MAPLE_SDS4_REG3r RTL838X_SDS4_DUMMY0 -#define MAPLE_SDS5_REG3r (RTL838X_SDS4_REG28 + 0x100) -#define MAPLE_SDS4_FIB_REG0r (RTL838X_SDS4_REG28 + 0x880) -#define MAPLE_SDS5_FIB_REG0r (RTL838X_SDS4_REG28 + 0x980) +#define RTL838X_SDS4_FIB_REG0 (0xF800) +#define RTL838X_SDS4_REG28 (0xef80) +#define RTL838X_SDS4_DUMMY0 (0xef8c) +#define RTL838X_SDS5_EXT_REG6 (0xf18c) /* VLAN registers */ +#define RTL838X_VLAN_CTRL (0x3A74) #define RTL838X_VLAN_PROFILE(idx) (0x3A88 + ((idx) << 2)) #define RTL838X_VLAN_PORT_EGR_FLTR (0x3A84) -#define RTL838X_VLAN_PORT_PB_VLAN(port) (0x3C00 + ((port) << 2)) +#define RTL838X_VLAN_PORT_PB_VLAN (0x3C00) #define RTL838X_VLAN_PORT_IGR_FLTR(port) (0x3A7C + (((port >> 4) << 2))) #define RTL838X_VLAN_PORT_IGR_FLTR_0 (0x3A7C) #define RTL838X_VLAN_PORT_IGR_FLTR_1 (0x3A7C + 4) -#define RTL838X_VLAN_PORT_TAG_STS_CTRL(port) (0xA530 + (((port) << 2))) +#define RTL838X_VLAN_PORT_TAG_STS_CTRL (0xA530) + #define RTL839X_VLAN_PROFILE(idx) (0x25C0 + (((idx) << 3))) #define RTL839X_VLAN_CTRL (0x26D4) -#define RTL839X_VLAN_PORT_PB_VLAN(port) (0x26D8 + (((port) << 2))) +#define RTL839X_VLAN_PORT_PB_VLAN (0x26D8) #define RTL839X_VLAN_PORT_IGR_FLTR(port) (0x27B4 + (((port >> 4) << 2))) #define RTL839X_VLAN_PORT_EGR_FLTR(port) (0x27C4 + (((port >> 5) << 2))) -#define RTL839X_VLAN_PORT_TAG_STS_CTRL(port) (0x6828 + (((port) << 2))) +#define RTL839X_VLAN_PORT_TAG_STS_CTRL (0x6828) + +#define RTL930X_VLAN_PROFILE_SET(idx) (0x9c60 + (((idx) * 20))) +#define RTL930X_VLAN_CTRL (0x82D4) +#define RTL930X_VLAN_PORT_PB_VLAN (0x82D8) +#define RTL930X_VLAN_PORT_IGR_FLTR(port) (0x83C0 + (((port >> 4) << 2))) +#define RTL930X_VLAN_PORT_EGR_FLTR (0x83C8) +#define RTL930X_VLAN_PORT_TAG_STS_CTRL (0xCE24) + +#define RTL931X_VLAN_PROFILE_SET(idx) (0x9800 + (((idx) * 28))) +#define RTL931X_VLAN_CTRL (0x94E4) +#define RTL931X_VLAN_PORT_IGR_FLTR(port) (0x96B4 + (((port >> 4) << 2))) +#define RTL931X_VLAN_PORT_EGR_FLTR(port) (0x96C4 + (((port >> 5) << 2))) +#define RTL931X_VLAN_PORT_TAG_CTRL (0x4860) -/* Table 0/1 access registers */ +/* Table access registers */ #define RTL838X_TBL_ACCESS_CTRL_0 (0x6914) #define RTL838X_TBL_ACCESS_DATA_0(idx) (0x6918 + ((idx) << 2)) #define RTL838X_TBL_ACCESS_CTRL_1 (0xA4C8) #define RTL838X_TBL_ACCESS_DATA_1(idx) (0xA4CC + ((idx) << 2)) + #define RTL839X_TBL_ACCESS_CTRL_0 (0x1190) #define RTL839X_TBL_ACCESS_DATA_0(idx) (0x1194 + ((idx) << 2)) #define RTL839X_TBL_ACCESS_CTRL_1 (0x6b80) #define RTL839X_TBL_ACCESS_DATA_1(idx) (0x6b84 + ((idx) << 2)) +#define RTL839X_TBL_ACCESS_CTRL_2 (0x611C) +#define RTL839X_TBL_ACCESS_DATA_2(i) (0x6120 + (((i) << 2))) + +#define RTL930X_TBL_ACCESS_CTRL_0 (0xB340) +#define RTL930X_TBL_ACCESS_DATA_0(idx) (0xB344 + ((idx) << 2)) +#define RTL930X_TBL_ACCESS_CTRL_1 (0xB3A0) +#define RTL930X_TBL_ACCESS_DATA_1(idx) (0xB3A4 + ((idx) << 2)) +#define RTL930X_TBL_ACCESS_CTRL_2 (0xCE04) +#define RTL930X_TBL_ACCESS_DATA_2(i) (0xCE08 + (((i) << 2))) + +#define RTL931X_TBL_ACCESS_CTRL_0 (0x8500) +#define RTL931X_TBL_ACCESS_DATA_0(idx) (0x8508 + ((idx) << 2)) +#define RTL931X_TBL_ACCESS_CTRL_1 (0x40C0) +#define RTL931X_TBL_ACCESS_DATA_1(idx) (0x40C4 + ((idx) << 2)) +#define RTL931X_TBL_ACCESS_CTRL_2 (0x8528) +#define RTL931X_TBL_ACCESS_DATA_2(i) (0x852C + (((i) << 2))) +#define RTL931X_TBL_ACCESS_CTRL_3 (0x0200) +#define RTL931X_TBL_ACCESS_DATA_3(i) (0x0204 + (((i) << 2))) +#define RTL931X_TBL_ACCESS_CTRL_4 (0x20DC) +#define RTL931X_TBL_ACCESS_DATA_4(i) (0x20E0 + (((i) << 2))) +#define RTL931X_TBL_ACCESS_CTRL_5 (0x7E1C) +#define RTL931X_TBL_ACCESS_DATA_5(i) (0x7E20 + (((i) << 2))) /* MAC handling */ #define RTL838X_MAC_LINK_STS (0xa188) #define RTL839X_MAC_LINK_STS (0x0390) -#define RTL838X_MAC_LINK_SPD_STS(port) (0xa190 + (((port >> 4) << 2))) -#define RTL839X_MAC_LINK_SPD_STS(port) (0x03a0 + (((port >> 4) << 2))) +#define RTL930X_MAC_LINK_STS (0xCB10) +#define RTL931X_MAC_LINK_STS (0x0EC0) +#define RTL838X_MAC_LINK_SPD_STS(p) (0xa190 + (((p >> 4) << 2))) +#define RTL839X_MAC_LINK_SPD_STS(p) (0x03a0 + (((p >> 4) << 2))) +#define RTL930X_MAC_LINK_SPD_STS(p) (0xCB18 + (((p >> 3) << 2))) +#define RTL931X_MAC_LINK_SPD_STS(p) (0x0ED0 + (((p >> 3) << 2))) #define RTL838X_MAC_LINK_DUP_STS (0xa19c) #define RTL839X_MAC_LINK_DUP_STS (0x03b0) +#define RTL930X_MAC_LINK_DUP_STS (0xCB28) +#define RTL931X_MAC_LINK_DUP_STS (0x0EF0) #define RTL838X_MAC_TX_PAUSE_STS (0xa1a0) #define RTL839X_MAC_TX_PAUSE_STS (0x03b8) +#define RTL930X_MAC_TX_PAUSE_STS (0xCB2C) +#define RTL931X_MAC_TX_PAUSE_STS (0x0EF8) #define RTL838X_MAC_RX_PAUSE_STS (0xa1a4) #define RTL839X_MAC_RX_PAUSE_STS (0x03c0) -#define RTL838X_EEE_TX_TIMER_GIGA_CTRL (0xaa04) -#define RTL838X_EEE_TX_TIMER_GELITE_CTRL (0xaa08) - -#define RTL838X_DMA_IF_CTRL (0x9f58) +#define RTL930X_MAC_RX_PAUSE_STS (0xCB30) +#define RTL931X_MAC_RX_PAUSE_STS (0x0F00) /* MAC link state bits */ #define FORCE_EN (1 << 0) @@ -108,36 +159,71 @@ #define RTL838X_EEE_PORT_TX_EN (0x014c) #define RTL838X_EEE_PORT_RX_EN (0x0150) #define RTL838X_EEE_CLK_STOP_CTRL (0x0148) +#define RTL838X_EEE_TX_TIMER_GIGA_CTRL (0xaa04) +#define RTL838X_EEE_TX_TIMER_GELITE_CTRL (0xaa08) /* L2 functionality */ #define RTL838X_L2_CTRL_0 (0x3200) #define RTL839X_L2_CTRL_0 (0x3800) +#define RTL930X_L2_CTRL (0x8FD8) +#define RTL931X_L2_CTRL (0xC800) #define RTL838X_L2_CTRL_1 (0x3204) #define RTL839X_L2_CTRL_1 (0x3804) +#define RTL930X_L2_AGE_CTRL (0x8FDC) +#define RTL931X_L2_AGE_CTRL (0xC804) #define RTL838X_L2_PORT_AGING_OUT (0x3358) #define RTL839X_L2_PORT_AGING_OUT (0x3b74) +#define RTL930X_L2_PORT_AGE_CTRL (0x8FE0) +#define RTL931X_L2_PORT_AGE_CTRL (0xc808) #define RTL838X_TBL_ACCESS_L2_CTRL (0x6900) #define RTL839X_TBL_ACCESS_L2_CTRL (0x1180) +#define RTL930X_TBL_ACCESS_L2_CTRL (0xB320) +#define RTL930X_TBL_ACCESS_L2_METHOD_CTRL (0xB324) #define RTL838X_TBL_ACCESS_L2_DATA(idx) (0x6908 + ((idx) << 2)) #define RTL839X_TBL_ACCESS_L2_DATA(idx) (0x1184 + ((idx) << 2)) +#define RTL930X_TBL_ACCESS_L2_DATA(idx) (0xab08 + ((idx) << 2)) #define RTL838X_L2_TBL_FLUSH_CTRL (0x3370) #define RTL839X_L2_TBL_FLUSH_CTRL (0x3ba0) +#define RTL930X_L2_TBL_FLUSH_CTRL (0x9404) +#define RTL931X_L2_TBL_FLUSH_CTRL (0xCD9C) + #define RTL838X_L2_PORT_NEW_SALRN(p) (0x328c + (((p >> 4) << 2))) #define RTL839X_L2_PORT_NEW_SALRN(p) (0x38F0 + (((p >> 4) << 2))) +#define RTL930X_L2_PORT_SALRN(p) (0x8FEC + (((p >> 4) << 2))) +#define RTL931X_L2_PORT_NEW_SALRN(p) (0xC820 + (((p >> 4) << 2))) #define RTL838X_L2_PORT_NEW_SA_FWD(p) (0x3294 + (((p >> 4) << 2))) #define RTL839X_L2_PORT_NEW_SA_FWD(p) (0x3900 + (((p >> 4) << 2))) -#define RTL838X_L2_PORT_SALRN(p) (0x328c + (((p >> 4) << 2))) -#define RTL839X_L2_PORT_SALRN(p) (0x38F0 + (((p >> 4) << 2))) +#define RTL930X_L2_PORT_NEW_SA_FWD(p) (0x8FF4 + (((p / 10) << 2))) +#define RTL931X_L2_PORT_NEW_SA_FWD(p) (0xC830 + (((p / 10) << 2))) + +#define RTL930X_ST_CTRL (0x8798) + +#define RTL930X_L2_PORT_SABLK_CTRL (0x905c) +#define RTL930X_L2_PORT_DABLK_CTRL (0x9060) + +#define RTL838X_RMA_BPDU_FLD_PMSK (0x4348) +#define RTL930X_RMA_BPDU_FLD_PMSK (0x9F18) +#define RTL931X_RMA_BPDU_FLD_PMSK (0x8950) +#define RTL839X_RMA_BPDU_FLD_PMSK (0x125C) /* Port Mirroring */ -#define RTL838X_MIR_CTRL(grp) (0x5D00 + (((grp) << 2))) -#define RTL838X_MIR_DPM_CTRL(grp) (0x5D20 + (((grp) << 2))) -#define RTL838X_MIR_SPM_CTRL(grp) (0x5D10 + (((grp) << 2))) -#define RTL839X_MIR_CTRL(grp) (0x2500 + (((grp) << 2))) -#define RTL839X_MIR_DPM_CTRL(grp) (0x2530 + (((grp) << 2))) -#define RTL839X_MIR_SPM_CTRL(grp) (0x2510 + (((grp) << 2))) - -/* Storm control */ +#define RTL838X_MIR_CTRL (0x5D00) +#define RTL838X_MIR_DPM_CTRL (0x5D20) +#define RTL838X_MIR_SPM_CTRL (0x5D10) + +#define RTL839X_MIR_CTRL (0x2500) +#define RTL839X_MIR_DPM_CTRL (0x2530) +#define RTL839X_MIR_SPM_CTRL (0x2510) + +#define RTL930X_MIR_CTRL (0xA2A0) +#define RTL930X_MIR_DPM_CTRL (0xA2C0) +#define RTL930X_MIR_SPM_CTRL (0xA2B0) + +#define RTL931X_MIR_CTRL (0xAF00) +#define RTL931X_MIR_DPM_CTRL (0xAF30) +#define RTL931X_MIR_SPM_CTRL (0xAF10) + +/* Storm/rate control and scheduling */ #define RTL838X_STORM_CTRL (0x4700) #define RTL839X_STORM_CTRL (0x1800) #define RTL838X_STORM_CTRL_LB_CTRL(p) (0x4884 + (((p) << 2))) @@ -145,12 +231,23 @@ #define RTL838X_STORM_CTRL_BURST_PPS_1 (0x4878) #define RTL838X_STORM_CTRL_BURST_0 (0x487c) #define RTL838X_STORM_CTRL_BURST_1 (0x4880) +#define RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_0 (0x1804) +#define RTL839X_STORM_CTRL_LB_TICK_TKN_CTRL_1 (0x1808) #define RTL838X_SCHED_CTRL (0xB980) +#define RTL839X_SCHED_CTRL (0x60F4) #define RTL838X_SCHED_LB_TICK_TKN_CTRL_0 (0xAD58) #define RTL838X_SCHED_LB_TICK_TKN_CTRL_1 (0xAD5C) #define RTL839X_SCHED_LB_TICK_TKN_CTRL_0 (0x1804) #define RTL839X_SCHED_LB_TICK_TKN_CTRL_1 (0x1808) +#define RTL839X_STORM_CTRL_SPCL_LB_TICK_TKN_CTRL (0x2000) +#define RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_0 (0x1604) +#define RTL839X_IGR_BWCTRL_LB_TICK_TKN_CTRL_1 (0x1608) +#define RTL839X_SCHED_LB_TICK_TKN_CTRL (0x60F8) +#define RTL839X_SCHED_LB_TICK_TKN_PPS_CTRL (0x6200) #define RTL838X_SCHED_LB_THR (0xB984) +#define RTL839X_SCHED_LB_THR (0x60FC) +#define RTL838X_SCHED_P_EGR_RATE_CTRL(p) (0xC008 + (((p) << 7))) +#define RTL838X_SCHED_Q_EGR_RATE_CTRL(p, q) (0xC00C + (p << 7) + (((q) << 2))) #define RTL838X_STORM_CTRL_PORT_BC_EXCEED (0x470C) #define RTL838X_STORM_CTRL_PORT_MC_EXCEED (0x4710) #define RTL838X_STORM_CTRL_PORT_UC_EXCEED (0x4714) @@ -160,6 +257,25 @@ #define RTL838X_STORM_CTRL_PORT_UC(p) (0x4718 + (((p) << 2))) #define RTL838X_STORM_CTRL_PORT_MC(p) (0x478c + (((p) << 2))) #define RTL838X_STORM_CTRL_PORT_BC(p) (0x4800 + (((p) << 2))) +#define RTL839X_STORM_CTRL_PORT_UC_0(p) (0x185C + (((p) << 3))) +#define RTL839X_STORM_CTRL_PORT_UC_1(p) (0x1860 + (((p) << 3))) +#define RTL839X_STORM_CTRL_PORT_MC_0(p) (0x19FC + (((p) << 3))) +#define RTL839X_STORM_CTRL_PORT_MC_1(p) (0x1a00 + (((p) << 3))) +#define RTL839X_STORM_CTRL_PORT_BC_0(p) (0x1B9C + (((p) << 3))) +#define RTL839X_STORM_CTRL_PORT_BC_1(p) (0x1BA0 + (((p) << 3))) +#define RTL839X_TBL_ACCESS_CTRL_2 (0x611C) +#define RTL839X_TBL_ACCESS_DATA_2(i) (0x6120 + (((i) << 2))) +#define RTL839X_IGR_BWCTRL_PORT_CTRL_10G_0(p) (0x1618 + (((p) << 3))) +#define RTL839X_IGR_BWCTRL_PORT_CTRL_10G_1(p) (0x161C + (((p) << 3))) +#define RTL839X_IGR_BWCTRL_PORT_CTRL_0(p) (0x1640 + (((p) << 3))) +#define RTL839X_IGR_BWCTRL_PORT_CTRL_1(p) (0x1644 + (((p) << 3))) +#define RTL839X_IGR_BWCTRL_CTRL_LB_THR (0x1614) + +/* Link aggregation (Trunking) */ +#define RTL839X_TRK_MBR_CTR (0x2200) +#define RTL838X_TRK_MBR_CTR (0x3E00) +#define RTL930X_TRK_MBR_CTRL (0xA41C) +#define RTL931X_TRK_MBR_CTRL (0xB8D0) /* Attack prevention */ #define RTL838X_ATK_PRVNT_PORT_EN (0x5B00) @@ -167,6 +283,48 @@ #define RTL838X_ATK_PRVNT_ACT (0x5B08) #define RTL838X_ATK_PRVNT_STS (0x5B1C) +/* 802.1X */ +#define RTL838X_SPCL_TRAP_EAPOL_CTRL (0x6988) +#define RTL839X_SPCL_TRAP_EAPOL_CTRL (0x105C) + +/* QoS */ +#define RTL838X_QM_INTPRI2QID_CTRL (0x5F00) +#define RTL839X_QM_INTPRI2QID_CTRL(q) (0x1110 + (q << 2)) +#define RTL839X_QM_PORT_QNUM(p) (0x1130 + (((p / 10) << 2))) +#define RTL838X_PRI_SEL_PORT_PRI(p) (0x5FB8 + (((p / 10) << 2))) +#define RTL839X_PRI_SEL_PORT_PRI(p) (0x10A8 + (((p / 10) << 2))) +#define RTL838X_QM_PKT2CPU_INTPRI_MAP (0x5F10) +#define RTL839X_QM_PKT2CPU_INTPRI_MAP (0x1154) +#define RTL838X_PRI_SEL_CTRL (0x10E0) +#define RTL839X_PRI_SEL_CTRL (0x10E0) +#define RTL838X_PRI_SEL_TBL_CTRL(i) (0x5FD8 + (((i) << 2))) +#define RTL839X_PRI_SEL_TBL_CTRL(i) (0x10D0 + (((i) << 2))) +#define RTL838X_QM_PKT2CPU_INTPRI_0 (0x5F04) +#define RTL838X_QM_PKT2CPU_INTPRI_1 (0x5F08) +#define RTL838X_QM_PKT2CPU_INTPRI_2 (0x5F0C) +#define RTL839X_OAM_CTRL (0x2100) +#define RTL839X_OAM_PORT_ACT_CTRL(p) (0x2104 + (((p) << 2))) +#define RTL839X_RMK_PORT_DEI_TAG_CTRL(p) (0x6A9C + (((p >> 5) << 2))) +#define RTL839X_PRI_SEL_IPRI_REMAP (0x1080) +#define RTL838X_PRI_SEL_IPRI_REMAP (0x5F8C) +#define RTL839X_PRI_SEL_DEI2DP_REMAP (0x10EC) +#define RTL839X_PRI_SEL_DSCP2DP_REMAP_ADDR(i) (0x10F0 + (((i >> 4) << 2))) +#define RTL839X_RMK_DEI_CTRL (0x6AA4) +#define RTL839X_WRED_PORT_THR_CTRL(i) (0x6084 + ((i) << 2)) +#define RTL839X_WRED_QUEUE_THR_CTRL(q, i) (0x6090 + ((q) * 12) + ((i) << 2)) +#define RTL838X_PRI_DSCP_INVLD_CTRL0 (0x5FE8) +#define RTL838X_RMK_IPRI_CTRL (0xA460) +#define RTL838X_RMK_OPRI_CTRL (0xA464) +#define RTL838X_SCHED_P_TYPE_CTRL(p) (0xC04C + (((p) << 7))) +#define RTL838X_SCHED_LB_CTRL(p) (0xC004 + (((p) << 7))) +#define RTL838X_FC_P_EGR_DROP_CTRL(p) (0x6B1C + (((p) << 2))) + +/* Debug features */ +#define RTL930X_STAT_PRVTE_DROP_COUNTER0 (0xB5B8) + +#define MAX_LAGS 16 +#define MAX_PRIOS 8 + enum phy_type { PHY_NONE = 0, PHY_RTL838X_SDS = 1, @@ -182,6 +340,9 @@ struct rtl838x_port { u16 pvid; bool eee_enabled; enum phy_type phy; + bool is10G; + bool is2G5; + u8 sds_num; const struct dsa_port *dp; }; @@ -217,6 +378,8 @@ struct rtl838x_l2_entry { bool suspended; bool next_hop; int age; + u8 trunk; + u8 stackDev; u16 mc_portmask_index; }; @@ -231,8 +394,12 @@ struct rtl838x_reg { u64 (*get_port_reg_le)(int reg); int stat_port_rst; int stat_rst; - int (*stat_port_std_mib)(int p); + int stat_port_std_mib; int (*port_iso_ctrl)(int p); + void (*traffic_enable)(int source, int dest); + void (*traffic_disable)(int source, int dest); + void (*traffic_set)(int source, u64 dest_matrix); + u64 (*traffic_get)(int source); int l2_ctrl_0; int l2_ctrl_1; int l2_port_aging_out; @@ -248,13 +415,16 @@ struct rtl838x_reg { void (*vlan_tables_read)(u32 vlan, struct rtl838x_vlan_info *info); void (*vlan_set_tagged)(u32 vlan, struct rtl838x_vlan_info *info); void (*vlan_set_untagged)(u32 vlan, u64 portmask); + void (*vlan_profile_dump)(int index); + void (*stp_get)(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]); + void (*stp_set)(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]); int (*mac_force_mode_ctrl)(int port); int (*mac_port_ctrl)(int port); int (*l2_port_new_salrn)(int port); int (*l2_port_new_sa_fwd)(int port); - int (*mir_ctrl)(int group); - int (*mir_dpm)(int group); - int (*mir_spm)(int group); + int mir_ctrl; + int mir_dpm; + int mir_spm; int mac_link_sts; int mac_link_dup_sts; int (*mac_link_spd_sts)(int port); @@ -262,11 +432,14 @@ struct rtl838x_reg { int mac_tx_pause_sts; u64 (*read_l2_entry_using_hash)(u32 hash, u32 position, struct rtl838x_l2_entry *e); u64 (*read_cam)(int idx, struct rtl838x_l2_entry *e); - int (*vlan_profile)(int profile); - int (*vlan_port_egr_filter)(int port); - int (*vlan_port_igr_filter)(int port); - int (*vlan_port_pb)(int port); - int (*vlan_port_tag_sts_ctrl)(int port); + int vlan_port_egr_filter; + int vlan_port_igr_filter; + int vlan_port_pb; + int vlan_port_tag_sts_ctrl; + int (*rtl838x_vlan_port_tag_sts_ctrl)(int port); + int (*trk_mbr_ctr)(int group); + int rma_bpdu_fld_pmask; + int spcl_trap_eapol_ctrl; }; struct rtl838x_switch_priv { @@ -276,7 +449,7 @@ struct rtl838x_switch_priv { u16 id; u16 family_id; char version; - struct rtl838x_port ports[54]; /* TODO: correct size! */ + struct rtl838x_port ports[57]; struct mutex reg_mutex; int link_state_irq; int mirror_group_ports[4]; @@ -284,8 +457,14 @@ struct rtl838x_switch_priv { const struct rtl838x_reg *r; u8 cpu_port; u8 port_mask; + u8 port_width; + u64 irq_mask; u32 fib_entries; struct dentry *dbgfs_dir; + int n_lags; + u64 lags_port_members[MAX_LAGS]; + struct net_device *lag_devs[MAX_LAGS]; + struct notifier_block nb; }; void rtl838x_dbgfs_init(struct rtl838x_switch_priv *priv); diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl839x.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl839x.c index 8dd123f609..5106bd2e9d 100644 --- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl839x.c +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl839x.c @@ -4,53 +4,18 @@ #include "rtl83xx.h" extern struct mutex smi_lock; +extern struct rtl83xx_soc_info soc_info; - -static inline void rtl839x_mask_port_reg_be(u64 clear, u64 set, int reg) -{ - sw_w32_mask((u32)(clear >> 32), (u32)(set >> 32), reg); - sw_w32_mask((u32)(clear & 0xffffffff), (u32)(set & 0xffffffff), reg + 4); -} - -static inline u64 rtl839x_get_port_reg_be(int reg) +void rtl839x_print_matrix(void) { - u64 v = sw_r32(reg); - - v <<= 32; - v |= sw_r32(reg + 4); - return v; -} - -static inline void rtl839x_set_port_reg_be(u64 set, int reg) -{ - sw_w32(set >> 32, reg); - sw_w32(set & 0xffffffff, reg + 4); -} - -static inline void rtl839x_mask_port_reg_le(u64 clear, u64 set, int reg) -{ - sw_w32_mask((u32)clear, (u32)set, reg); - sw_w32_mask((u32)(clear >> 32), (u32)(set >> 32), reg + 4); -} - -static inline void rtl839x_set_port_reg_le(u64 set, int reg) -{ - sw_w32(set, reg); - sw_w32(set >> 32, reg + 4); -} - -static inline u64 rtl839x_get_port_reg_le(int reg) -{ - u64 v = sw_r32(reg + 4); - - v <<= 32; - v |= sw_r32(reg); - return v; -} + volatile u64 *ptr9; + int i; -static inline int rtl839x_stat_port_std_mib(int p) -{ - return RTL839X_STAT_PORT_STD_MIB + (p << 8); + ptr9 = RTL838X_SW_BASE + RTL839X_PORT_ISO_CTRL(0); + for (i = 0; i < 52; i += 4) + pr_debug("> %16llx %16llx %16llx %16llx\n", + ptr9[i + 0], ptr9[i + 1], ptr9[i + 2], ptr9[i + 3]); + pr_debug("CPU_PORT> %16llx\n", ptr9[52]); } static inline int rtl839x_port_iso_ctrl(int p) @@ -70,6 +35,12 @@ static inline void rtl839x_exec_tbl1_cmd(u32 cmd) do { } while (sw_r32(RTL839X_TBL_ACCESS_CTRL_1) & BIT(16)); } +inline void rtl839x_exec_tbl2_cmd(u32 cmd) +{ + sw_w32(cmd, RTL839X_TBL_ACCESS_CTRL_2); + do { } while (sw_r32(RTL839X_TBL_ACCESS_CTRL_2) & (1 << 9)); +} + static inline int rtl839x_tbl_access_data_0(int i) { return RTL839X_TBL_ACCESS_DATA_0(i); @@ -81,33 +52,33 @@ static void rtl839x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info) u64 v; u32 u, w; - cmd = BIT(16) /* Execute cmd */ + cmd = 1 << 16 /* Execute cmd */ | 0 << 15 /* Read */ | 0 << 12 /* Table type 0b000 */ | (vlan & 0xfff); rtl839x_exec_tbl0_cmd(cmd); - v = sw_r32(RTL838X_TBL_ACCESS_DATA_0(0)); + v = sw_r32(RTL839X_TBL_ACCESS_DATA_0(0)); v <<= 32; - u = sw_r32(RTL838X_TBL_ACCESS_DATA_0(1)); + u = sw_r32(RTL839X_TBL_ACCESS_DATA_0(1)); v |= u; info->tagged_ports = v >> 11; - w = sw_r32(RTL838X_TBL_ACCESS_DATA_0(2)); + w = sw_r32(RTL839X_TBL_ACCESS_DATA_0(2)); info->profile_id = w >> 30 | ((u & 1) << 2); info->hash_mc_fid = !!(u & 2); info->hash_uc_fid = !!(u & 4); info->fid = (u >> 3) & 0xff; - cmd = BIT(16) /* Execute cmd */ - | 0 << 15 /* Read */ - | 0 << 12 /* Table type 0b000 */ + cmd = 1 << 15 /* Execute cmd */ + | 0 << 14 /* Read */ + | 0 << 12 /* Table type 0b00 */ | (vlan & 0xfff); rtl839x_exec_tbl1_cmd(cmd); - v = sw_r32(RTL838X_TBL_ACCESS_DATA_1(0)); + v = sw_r32(RTL839X_TBL_ACCESS_DATA_1(0)); v <<= 32; - v |= sw_r32(RTL838X_TBL_ACCESS_DATA_1(1)); + v |= sw_r32(RTL839X_TBL_ACCESS_DATA_1(1)); info->untagged_ports = v >> 11; } @@ -161,45 +132,18 @@ static inline int rtl839x_l2_port_new_sa_fwd(int p) return RTL839X_L2_PORT_NEW_SA_FWD(p); } -static inline int rtl839x_mir_ctrl(int group) -{ - return RTL839X_MIR_CTRL(group); -} - -static inline int rtl839x_mir_dpm(int group) -{ - return RTL839X_MIR_DPM_CTRL(group); -} - -static inline int rtl839x_mir_spm(int group) -{ - return RTL839X_MIR_SPM_CTRL(group); -} - static inline int rtl839x_mac_link_spd_sts(int p) { return RTL839X_MAC_LINK_SPD_STS(p); } -static u64 rtl839x_read_l2_entry_using_hash(u32 hash, u32 position, struct rtl838x_l2_entry *e) +static inline int rtl839x_trk_mbr_ctr(int group) { - u64 entry; - u32 r[3]; - - /* Search in SRAM, with hash and at position in hash bucket (0-3) */ - u32 idx = (0 << 14) | (hash << 2) | position; - - u32 cmd = BIT(17) /* Execute cmd */ - | 0 << 16 /* Read */ - | 0 << 14 /* Table type 0b00 */ - | (idx & 0x3fff); - - sw_w32(cmd, RTL839X_TBL_ACCESS_L2_CTRL); - do { } while (sw_r32(RTL839X_TBL_ACCESS_L2_CTRL) & BIT(17)); - r[0] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(0)); - r[1] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(1)); - r[2] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(2)); + return RTL839X_TRK_MBR_CTR + (group << 3); +} +static void rtl839x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e) +{ /* Table contains different entry types, we need to identify the right one: * Check for MC entries, first */ @@ -220,12 +164,12 @@ static u64 rtl839x_read_l2_entry_using_hash(u32 hash, u32 position, struct rtl83 e->vid = (r[2] >> 4) & 0xfff; e->rvid = (r[0] >> 20) & 0xfff; e->port = (r[2] >> 24) & 0x3f; - e->block_da = !!(r[2] & BIT(19)); - e->block_sa = !!(r[2] & BIT(20)); - e->suspended = !!(r[2] & BIT(17)); - e->next_hop = !!(r[2] & BIT(16)); + e->block_da = !!(r[2] & (1 << 19)); + e->block_sa = !!(r[2] & (1 << 20)); + e->suspended = !!(r[2] & (1 << 17)); + e->next_hop = !!(r[2] & (1 << 16)); if (e->next_hop) - pr_debug("Found next hop entry, need to read data\n"); + pr_info("Found next hop entry, need to read data\n"); e->age = (r[2] >> 21) & 3; e->valid = true; if (!(r[2] & 0xc0fd0000)) /* Check for valid entry */ @@ -246,6 +190,28 @@ static u64 rtl839x_read_l2_entry_using_hash(u32 hash, u32 position, struct rtl83 e->valid = true; e->type = IP6_MULTICAST; } +} + +static u64 rtl839x_read_l2_entry_using_hash(u32 hash, u32 position, struct rtl838x_l2_entry *e) +{ + u64 entry; + u32 r[3]; + + /* Search in SRAM, with hash and at position in hash bucket (0-3) */ + u32 idx = (0 << 14) | (hash << 2) | position; + + u32 cmd = 1 << 17 /* Execute cmd */ + | 0 << 16 /* Read */ + | 0 << 14 /* Table type 0b00 */ + | (idx & 0x3fff); + + sw_w32(cmd, RTL839X_TBL_ACCESS_L2_CTRL); + do { } while (sw_r32(RTL839X_TBL_ACCESS_L2_CTRL) & (1 << 17)); + r[0] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(0)); + r[1] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(1)); + r[2] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(2)); + + rtl839x_fill_l2_entry(r, e); entry = (((u64) r[0]) << 12) | ((r[1] & 0xfffffff0) << 12) | ((r[2] >> 4) & 0xfff); return entry; @@ -256,33 +222,22 @@ static u64 rtl839x_read_cam(int idx, struct rtl838x_l2_entry *e) u64 entry; u32 r[3]; - u32 cmd = BIT(17) /* Execute cmd */ + u32 cmd = 1 << 17 /* Execute cmd */ | 0 << 16 /* Read */ - | BIT(14) /* Table type 0b01 */ + | 1 << 14 /* Table type 0b01 */ | (idx & 0x3f); sw_w32(cmd, RTL839X_TBL_ACCESS_L2_CTRL); - do { } while (sw_r32(RTL839X_TBL_ACCESS_L2_CTRL) & BIT(17)); + do { } while (sw_r32(RTL839X_TBL_ACCESS_L2_CTRL) & (1 << 17)); r[0] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(0)); r[1] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(1)); r[2] = sw_r32(RTL839X_TBL_ACCESS_L2_DATA(2)); - e->mac[0] = (r[0] >> 12); - e->mac[1] = (r[0] >> 4); - e->mac[2] = ((r[1] >> 28) | (r[0] << 4)); - e->mac[3] = (r[1] >> 20); - e->mac[4] = (r[1] >> 12); - e->mac[5] = (r[1] >> 4); - e->is_static = !!((r[2] >> 18) & 1); - e->vid = (r[2] >> 4) & 0xfff; - e->rvid = (r[0] >> 20) & 0xfff; - e->port = (r[2] >> 24) & 0x3f; - - e->valid = true; - if (!(r[2] & 0x10fd0000)) /* Check for invalid entry */ - e->valid = false; + rtl839x_fill_l2_entry(r, e); if (e->valid) - pr_debug("Found in CAM: R1 %x R2 %x R3 %x\n", r[0], r[1], r[2]); + pr_info("Found in CAM: R1 %x R2 %x R3 %x\n", r[0], r[1], r[2]); + else + return 0; entry = (((u64) r[0]) << 12) | ((r[1] & 0xfffffff0) << 12) | ((r[2] >> 4) & 0xfff); return entry; @@ -303,62 +258,25 @@ static inline int rtl839x_vlan_port_igr_filter(int port) return RTL839X_VLAN_PORT_IGR_FLTR(port); } -static inline int rtl839x_vlan_port_pb(int port) +u64 rtl839x_traffic_get(int source) { - return RTL839X_VLAN_PORT_PB_VLAN(port); + return rtl839x_get_port_reg_be(rtl839x_port_iso_ctrl(source)); } -static inline int rtl839x_vlan_port_tag_sts_ctrl(int port) +void rtl839x_traffic_set(int source, u64 dest_matrix) { - return RTL839X_VLAN_PORT_TAG_STS_CTRL(port); + rtl839x_set_port_reg_be(dest_matrix, rtl839x_port_iso_ctrl(source)); } -const struct rtl838x_reg rtl839x_reg = { - .mask_port_reg_be = rtl839x_mask_port_reg_be, - .set_port_reg_be = rtl839x_set_port_reg_be, - .get_port_reg_be = rtl839x_get_port_reg_be, - .mask_port_reg_le = rtl839x_mask_port_reg_le, - .set_port_reg_le = rtl839x_set_port_reg_le, - .get_port_reg_le = rtl839x_get_port_reg_le, - .stat_port_rst = RTL839X_STAT_PORT_RST, - .stat_rst = RTL839X_STAT_RST, - .stat_port_std_mib = rtl839x_stat_port_std_mib, - .port_iso_ctrl = rtl839x_port_iso_ctrl, - .l2_ctrl_0 = RTL839X_L2_CTRL_0, - .l2_ctrl_1 = RTL839X_L2_CTRL_1, - .l2_port_aging_out = RTL839X_L2_PORT_AGING_OUT, - .smi_poll_ctrl = RTL839X_SMI_PORT_POLLING_CTRL, - .l2_tbl_flush_ctrl = RTL839X_L2_TBL_FLUSH_CTRL, - .exec_tbl0_cmd = rtl839x_exec_tbl0_cmd, - .exec_tbl1_cmd = rtl839x_exec_tbl1_cmd, - .tbl_access_data_0 = rtl839x_tbl_access_data_0, - .isr_glb_src = RTL839X_ISR_GLB_SRC, - .isr_port_link_sts_chg = RTL839X_ISR_PORT_LINK_STS_CHG, - .imr_port_link_sts_chg = RTL839X_IMR_PORT_LINK_STS_CHG, - .imr_glb = RTL839X_IMR_GLB, - .vlan_tables_read = rtl839x_vlan_tables_read, - .vlan_set_tagged = rtl839x_vlan_set_tagged, - .vlan_set_untagged = rtl839x_vlan_set_untagged, - .mac_force_mode_ctrl = rtl839x_mac_force_mode_ctrl, - .mac_port_ctrl = rtl839x_mac_port_ctrl, - .l2_port_new_salrn = rtl839x_l2_port_new_salrn, - .l2_port_new_sa_fwd = rtl839x_l2_port_new_sa_fwd, - .mir_ctrl = rtl839x_mir_ctrl, - .mir_dpm = rtl839x_mir_dpm, - .mir_spm = rtl839x_mir_spm, - .mac_link_sts = RTL839X_MAC_LINK_STS, - .mac_link_dup_sts = RTL839X_MAC_LINK_DUP_STS, - .mac_link_spd_sts = rtl839x_mac_link_spd_sts, - .mac_rx_pause_sts = RTL839X_MAC_RX_PAUSE_STS, - .mac_tx_pause_sts = RTL839X_MAC_TX_PAUSE_STS, - .read_l2_entry_using_hash = rtl839x_read_l2_entry_using_hash, - .read_cam = rtl839x_read_cam, - .vlan_profile = rtl839x_vlan_profile, - .vlan_port_egr_filter = rtl839x_vlan_port_egr_filter, - .vlan_port_igr_filter = rtl839x_vlan_port_igr_filter, - .vlan_port_pb = rtl839x_vlan_port_pb, - .vlan_port_tag_sts_ctrl = rtl839x_vlan_port_tag_sts_ctrl, -}; +void rtl839x_traffic_enable(int source, int dest) +{ + rtl839x_mask_port_reg_be(0, BIT_ULL(dest), rtl839x_port_iso_ctrl(source)); +} + +void rtl839x_traffic_disable(int source, int dest) +{ + rtl839x_mask_port_reg_be(BIT(dest), 0, rtl839x_port_iso_ctrl(source)); +} irqreturn_t rtl839x_switch_irq(int irq, void *dev_id) { @@ -512,3 +430,84 @@ void rtl839x_vlan_profile_dump(int index) index, profile & 1, (profile >> 1) & 0xfff, (profile >> 13) & 0xfff, (profile1) & 0xfff); } + +static void rtl839x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) +{ + int i; + u32 cmd = 1 << 16 /* Execute cmd */ + | 0 << 15 /* Read */ + | 5 << 12 /* Table type 0b101 */ + | (msti & 0xfff); + priv->r->exec_tbl0_cmd(cmd); + + for (i = 0; i < 4; i++) + port_state[i] = sw_r32(priv->r->tbl_access_data_0(i)); +} + +static void rtl839x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[]) +{ + int i; + u32 cmd = 1 << 16 /* Execute cmd */ + | 1 << 15 /* Write */ + | 5 << 12 /* Table type 0b101 */ + | (msti & 0xfff); + for (i = 0; i < 4; i++) + sw_w32(port_state[i], priv->r->tbl_access_data_0(i)); + priv->r->exec_tbl0_cmd(cmd); +} + +const struct rtl838x_reg rtl839x_reg = { + .mask_port_reg_be = rtl839x_mask_port_reg_be, + .set_port_reg_be = rtl839x_set_port_reg_be, + .get_port_reg_be = rtl839x_get_port_reg_be, + .mask_port_reg_le = rtl839x_mask_port_reg_le, + .set_port_reg_le = rtl839x_set_port_reg_le, + .get_port_reg_le = rtl839x_get_port_reg_le, + .stat_port_rst = RTL839X_STAT_PORT_RST, + .stat_rst = RTL839X_STAT_RST, + .stat_port_std_mib = RTL839X_STAT_PORT_STD_MIB, + .traffic_enable = rtl839x_traffic_enable, + .traffic_disable = rtl839x_traffic_disable, + .traffic_get = rtl839x_traffic_get, + .traffic_set = rtl839x_traffic_set, + .port_iso_ctrl = rtl839x_port_iso_ctrl, + .l2_ctrl_0 = RTL839X_L2_CTRL_0, + .l2_ctrl_1 = RTL839X_L2_CTRL_1, + .l2_port_aging_out = RTL839X_L2_PORT_AGING_OUT, + .smi_poll_ctrl = RTL839X_SMI_PORT_POLLING_CTRL, + .l2_tbl_flush_ctrl = RTL839X_L2_TBL_FLUSH_CTRL, + .exec_tbl0_cmd = rtl839x_exec_tbl0_cmd, + .exec_tbl1_cmd = rtl839x_exec_tbl1_cmd, + .tbl_access_data_0 = rtl839x_tbl_access_data_0, + .isr_glb_src = RTL839X_ISR_GLB_SRC, + .isr_port_link_sts_chg = RTL839X_ISR_PORT_LINK_STS_CHG, + .imr_port_link_sts_chg = RTL839X_IMR_PORT_LINK_STS_CHG, + .imr_glb = RTL839X_IMR_GLB, + .vlan_tables_read = rtl839x_vlan_tables_read, + .vlan_set_tagged = rtl839x_vlan_set_tagged, + .vlan_set_untagged = rtl839x_vlan_set_untagged, + .vlan_profile_dump = rtl839x_vlan_profile_dump, + .stp_get = rtl839x_stp_get, + .stp_set = rtl839x_stp_set, + .mac_force_mode_ctrl = rtl839x_mac_force_mode_ctrl, + .mac_port_ctrl = rtl839x_mac_port_ctrl, + .l2_port_new_salrn = rtl839x_l2_port_new_salrn, + .l2_port_new_sa_fwd = rtl839x_l2_port_new_sa_fwd, + .mir_ctrl = RTL839X_MIR_CTRL, + .mir_dpm = RTL839X_MIR_DPM_CTRL, + .mir_spm = RTL839X_MIR_SPM_CTRL, + .mac_link_sts = RTL839X_MAC_LINK_STS, + .mac_link_dup_sts = RTL839X_MAC_LINK_DUP_STS, + .mac_link_spd_sts = rtl839x_mac_link_spd_sts, + .mac_rx_pause_sts = RTL839X_MAC_RX_PAUSE_STS, + .mac_tx_pause_sts = RTL839X_MAC_TX_PAUSE_STS, + .read_l2_entry_using_hash = rtl839x_read_l2_entry_using_hash, + .read_cam = rtl839x_read_cam, + .vlan_port_egr_filter = RTL839X_VLAN_PORT_EGR_FLTR(0), + .vlan_port_igr_filter = RTL839X_VLAN_PORT_IGR_FLTR(0), + .vlan_port_pb = RTL839X_VLAN_PORT_PB_VLAN, + .vlan_port_tag_sts_ctrl = RTL839X_VLAN_PORT_TAG_STS_CTRL, + .trk_mbr_ctr = rtl839x_trk_mbr_ctr, + .rma_bpdu_fld_pmask = RTL839X_RMA_BPDU_FLD_PMSK, + .spcl_trap_eapol_ctrl = RTL839X_SPCL_TRAP_EAPOL_CTRL, +}; diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl83xx.h b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl83xx.h index 3953512525..fd0455a6cd 100644 --- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl83xx.h +++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl83xx.h @@ -24,7 +24,71 @@ struct rtl83xx_mib_desc { const char *name; }; -void __init rtl83xx_storm_control_init(struct rtl838x_switch_priv *priv); +/* API for switch table access */ +struct table_reg { + u16 addr; + u16 data; + u8 max_data; + u8 c_bit; + u8 t_bit; + u8 rmode; + u8 tbl; + struct mutex lock; +}; + +#define TBL_DESC(_addr, _data, _max_data, _c_bit, _t_bit, _rmode) \ + { .addr = _addr, .data = _data, .max_data = _max_data, .c_bit = _c_bit, \ + .t_bit = _t_bit, .rmode = _rmode \ + } + +typedef enum { + RTL8380_TBL_L2 = 0, + RTL8380_TBL_0, + RTL8380_TBL_1, + RTL8390_TBL_L2, + RTL8390_TBL_0, + RTL8390_TBL_1, + RTL8390_TBL_2, + RTL9300_TBL_L2, + RTL9300_TBL_0, + RTL9300_TBL_1, + RTL9300_TBL_2, + RTL9300_TBL_HSB, + RTL9300_TBL_HSA, + RTL9310_TBL_0, + RTL9310_TBL_1, + RTL9310_TBL_2, + RTL9310_TBL_3, + RTL9310_TBL_4, + RTL9310_TBL_5, + RTL_TBL_END +} rtl838x_tbl_reg_t; + +void rtl_table_init(void); +struct table_reg *rtl_table_get(rtl838x_tbl_reg_t r, int t); +void rtl_table_release(struct table_reg *r); +void rtl_table_read(struct table_reg *r, int idx); +void rtl_table_write(struct table_reg *r, int idx); +inline u16 rtl_table_data(struct table_reg *r, int i); +inline u32 rtl_table_data_r(struct table_reg *r, int i); +inline void rtl_table_data_w(struct table_reg *r, u32 v, int i); + +void __init rtl83xx_setup_qos(struct rtl838x_switch_priv *priv); +int read_phy(u32 port, u32 page, u32 reg, u32 *val); +int write_phy(u32 port, u32 page, u32 reg, u32 val); + +/* Port register accessor functions for the RTL839x and RTL931X SoCs */ +void rtl839x_mask_port_reg_be(u64 clear, u64 set, int reg); +u64 rtl839x_get_port_reg_be(int reg); +void rtl839x_set_port_reg_be(u64 set, int reg); +void rtl839x_mask_port_reg_le(u64 clear, u64 set, int reg); +void rtl839x_set_port_reg_le(u64 set, int reg); +u64 rtl839x_get_port_reg_le(int reg); + +/* Port register accessor functions for the RTL838x and RTL930X SoCs */ +void rtl838x_mask_port_reg(u64 clear, u64 set, int reg); +void rtl838x_set_port_reg(u64 set, int reg); +u64 rtl838x_get_port_reg(int reg); /* RTL838x-specific */ u32 rtl838x_hash(struct rtl838x_switch_priv *priv, u64 seed); @@ -32,6 +96,9 @@ irqreturn_t rtl838x_switch_irq(int irq, void *dev_id); void rtl8380_get_version(struct rtl838x_switch_priv *priv); void rtl838x_vlan_profile_dump(int index); int rtl83xx_dsa_phy_read(struct dsa_switch *ds, int phy_addr, int phy_reg); +void rtl8380_sds_rst(int mac); +int rtl8380_sds_power(int mac, int val); +void rtl838x_print_matrix(void); /* RTL839x-specific */ u32 rtl839x_hash(struct rtl838x_switch_priv *priv, u64 seed); @@ -39,6 +106,20 @@ irqreturn_t rtl839x_switch_irq(int irq, void *dev_id); void rtl8390_get_version(struct rtl838x_switch_priv *priv); void rtl839x_vlan_profile_dump(int index); int rtl83xx_dsa_phy_write(struct dsa_switch *ds, int phy_addr, int phy_reg, u16 val); +void rtl839x_exec_tbl2_cmd(u32 cmd); +void rtl839x_print_matrix(void); + +/* RTL930x-specific */ +u32 rtl930x_hash(struct rtl838x_switch_priv *priv, u64 seed); +irqreturn_t rtl930x_switch_irq(int irq, void *dev_id); +irqreturn_t rtl839x_switch_irq(int irq, void *dev_id); +void rtl930x_vlan_profile_dump(int index); +int rtl9300_sds_power(int mac, int val); +void rtl9300_sds_rst(int sds_num, u32 mode); +void rtl930x_print_matrix(void); + +/* RTL931x-specific */ +irqreturn_t rtl931x_switch_irq(int irq, void *dev_id); #endif /* _NET_DSA_RTL83XX_H */ diff --git a/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.c index fec842674e..7931daff07 100644 --- a/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.c +++ b/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.c @@ -16,6 +16,7 @@ #include <linux/of_mdio.h> #include <linux/module.h> #include <linux/phylink.h> +#include <linux/pkt_sched.h> #include <net/dsa.h> #include <net/switchdev.h> #include <asm/cacheflush.h> @@ -26,20 +27,24 @@ extern struct rtl83xx_soc_info soc_info; /* - * Maximum number of RX rings is 8, assigned by switch based on - * packet/port priortity (not implemented) - * Maximum number of TX rings is 2 (only ring 0 used) - * RX ringlength needs to be at least 200, otherwise CPU and Switch - * may gridlock. + * Maximum number of RX rings is 8 on RTL83XX and 32 on the 93XX + * The ring is assigned by switch based on packet/port priortity + * Maximum number of TX rings is 2, Ring 2 being the high priority + * ring on the RTL93xx SoCs. MAX_RING_SIZE * RING_BUFFER gives + * the memory used for the ring buffer. */ -#define RXRINGS 8 -#define RXRINGLEN 300 +#define MAX_RXRINGS 32 +#define MAX_RXLEN 100 +#define MAX_ENTRIES (200 * 8) #define TXRINGS 2 -#define TXRINGLEN 160 +// BUG: TXRINGLEN can be 160 +#define TXRINGLEN 16 #define NOTIFY_EVENTS 10 #define NOTIFY_BLOCKS 10 #define TX_EN 0x8 #define RX_EN 0x4 +#define TX_EN_93XX 0x20 +#define RX_EN_93XX 0x10 #define TX_DO 0x2 #define WRAP 0x2 @@ -53,11 +58,10 @@ extern struct rtl83xx_soc_info soc_info; struct p_hdr { uint8_t *buf; uint16_t reserved; - uint16_t size; /* buffer size */ + uint16_t size; /* buffer size */ uint16_t offset; - uint16_t len; /* pkt len */ - uint16_t reserved2; - uint16_t cpu_tag[5]; + uint16_t len; /* pkt len */ + uint16_t cpu_tag[10]; } __packed __aligned(1); struct n_event { @@ -70,14 +74,14 @@ struct n_event { } __packed __aligned(1); struct ring_b { - uint32_t rx_r[RXRINGS][RXRINGLEN]; + uint32_t rx_r[MAX_RXRINGS][MAX_RXLEN]; uint32_t tx_r[TXRINGS][TXRINGLEN]; - struct p_hdr rx_header[RXRINGS][RXRINGLEN]; + struct p_hdr rx_header[MAX_RXRINGS][MAX_RXLEN]; struct p_hdr tx_header[TXRINGS][TXRINGLEN]; - uint32_t c_rx[RXRINGS]; + uint32_t c_rx[MAX_RXRINGS]; uint32_t c_tx[TXRINGS]; - uint8_t rx_space[RXRINGS*RXRINGLEN*RING_BUFFER]; - uint8_t tx_space[TXRINGLEN*RING_BUFFER]; + uint8_t tx_space[TXRINGS * TXRINGLEN * RING_BUFFER]; + uint8_t *rx_space; }; struct notify_block { @@ -91,132 +95,230 @@ struct notify_b { u32 reserved2[8]; }; -inline void rtl838x_create_tx_header(struct p_hdr *h, int dest_port) +void rtl838x_create_tx_header(struct p_hdr *h, int dest_port, int prio) { + prio &= 0x7; + if (dest_port > 0) { - h->cpu_tag[0] = 0x0400; - h->cpu_tag[1] = 0x0200; - h->cpu_tag[2] = 0x0000; - h->cpu_tag[3] = (1 << dest_port) >> 16; - h->cpu_tag[4] = (1 << dest_port) & 0xffff; - } else { - h->cpu_tag[0] = 0; - h->cpu_tag[1] = 0; - h->cpu_tag[2] = 0; - h->cpu_tag[3] = 0; - h->cpu_tag[4] = 0; + // cpu_tag[0] is reserved on the RTL83XX SoCs + h->cpu_tag[1] = 0x0400; + h->cpu_tag[2] = 0x0200; + h->cpu_tag[3] = 0x0000; + h->cpu_tag[4] = BIT(dest_port) >> 16; + h->cpu_tag[5] = BIT(dest_port) & 0xffff; + // Set internal priority and AS_PRIO + if (prio >= 0) + h->cpu_tag[2] |= (prio | 0x8) << 12; } } -inline void rtl839x_create_tx_header(struct p_hdr *h, int dest_port) +void rtl839x_create_tx_header(struct p_hdr *h, int dest_port, int prio) { + prio &= 0x7; + if (dest_port > 0) { - h->cpu_tag[0] = 0x0100; - h->cpu_tag[1] = ((1 << (dest_port - 32)) >> 16) | (1 << 21); - h->cpu_tag[2] = (1 << (dest_port - 32)) & 0xffff; - h->cpu_tag[3] = (1 << dest_port) >> 16; - h->cpu_tag[4] = (1 << dest_port) & 0xffff; - } else { - h->cpu_tag[0] = 0; - h->cpu_tag[1] = 0; - h->cpu_tag[2] = 0; - h->cpu_tag[3] = 0; - h->cpu_tag[4] = 0; + // cpu_tag[0] is reserved on the RTL83XX SoCs + h->cpu_tag[1] = 0x0100; + h->cpu_tag[2] = h->cpu_tag[3] = h->cpu_tag[4] = h->cpu_tag[5] = 0; + if (dest_port >= 32) { + dest_port -= 32; + h->cpu_tag[2] = BIT(dest_port) >> 16; + h->cpu_tag[3] = BIT(dest_port) & 0xffff; + } else { + h->cpu_tag[4] = BIT(dest_port) >> 16; + h->cpu_tag[5] = BIT(dest_port) & 0xffff; + } + h->cpu_tag[6] |= BIT(21); // Enable destination port mask use + // Set internal priority and AS_PRIO + if (prio >= 0) + h->cpu_tag[1] |= prio | BIT(3); } } +void rtl930x_create_tx_header(struct p_hdr *h, int dest_port, int prio) +{ + h->cpu_tag[0] = 0x8000; + h->cpu_tag[1] = 0; // TODO: Fill port and prio + h->cpu_tag[2] = 0; + h->cpu_tag[3] = 0; + h->cpu_tag[4] = 0; + h->cpu_tag[5] = 0; + h->cpu_tag[6] = 0; + h->cpu_tag[7] = 0xffff; +} + +void rtl931x_create_tx_header(struct p_hdr *h, int dest_port, int prio) +{ + h->cpu_tag[0] = 0x8000; + h->cpu_tag[1] = 0; // TODO: Fill port and prio + h->cpu_tag[2] = 0; + h->cpu_tag[3] = 0; + h->cpu_tag[4] = 0; + h->cpu_tag[5] = 0; + h->cpu_tag[6] = 0; + h->cpu_tag[7] = 0xffff; +} + +struct rtl838x_rx_q { + int id; + struct rtl838x_eth_priv *priv; + struct napi_struct napi; +}; + struct rtl838x_eth_priv { struct net_device *netdev; struct platform_device *pdev; void *membase; spinlock_t lock; struct mii_bus *mii_bus; - struct napi_struct napi; + struct rtl838x_rx_q rx_qs[MAX_RXRINGS]; struct phylink *phylink; struct phylink_config phylink_config; u16 id; u16 family_id; const struct rtl838x_reg *r; u8 cpu_port; - u8 port_mask; u32 lastEvent; -}; - -static const struct rtl838x_reg rtl838x_reg = { - .mac_port_ctrl = rtl838x_mac_port_ctrl, - .dma_if_intr_sts = RTL838X_DMA_IF_INTR_STS, - .dma_if_intr_msk = RTL838X_DMA_IF_INTR_MSK, - .dma_if_ctrl = RTL838X_DMA_IF_CTRL, - .mac_force_mode_ctrl = rtl838x_mac_force_mode_ctrl, - .dma_rx_base = rtl838x_dma_rx_base, - .dma_tx_base = rtl838x_dma_tx_base, - .dma_if_rx_ring_size = rtl838x_dma_if_rx_ring_size, - .dma_if_rx_ring_cntr = rtl838x_dma_if_rx_ring_cntr, - .dma_if_rx_cur = rtl838x_dma_if_rx_cur, - .rst_glb_ctrl = RTL838X_RST_GLB_CTRL_0, - .get_mac_link_sts = rtl838x_get_mac_link_sts, - .get_mac_link_dup_sts = rtl838x_get_mac_link_dup_sts, - .get_mac_link_spd_sts = rtl838x_get_mac_link_spd_sts, - .get_mac_rx_pause_sts = rtl838x_get_mac_rx_pause_sts, - .get_mac_tx_pause_sts = rtl838x_get_mac_tx_pause_sts, - .mac = RTL838X_MAC, - .l2_tbl_flush_ctrl = RTL838X_L2_TBL_FLUSH_CTRL, -}; - -static const struct rtl838x_reg rtl839x_reg = { - .mac_port_ctrl = rtl839x_mac_port_ctrl, - .dma_if_intr_sts = RTL839X_DMA_IF_INTR_STS, - .dma_if_intr_msk = RTL839X_DMA_IF_INTR_MSK, - .dma_if_ctrl = RTL839X_DMA_IF_CTRL, - .mac_force_mode_ctrl = rtl839x_mac_force_mode_ctrl, - .dma_rx_base = rtl839x_dma_rx_base, - .dma_tx_base = rtl839x_dma_tx_base, - .dma_if_rx_ring_size = rtl839x_dma_if_rx_ring_size, - .dma_if_rx_ring_cntr = rtl839x_dma_if_rx_ring_cntr, - .dma_if_rx_cur = rtl839x_dma_if_rx_cur, - .rst_glb_ctrl = RTL839X_RST_GLB_CTRL, - .get_mac_link_sts = rtl839x_get_mac_link_sts, - .get_mac_link_dup_sts = rtl839x_get_mac_link_dup_sts, - .get_mac_link_spd_sts = rtl839x_get_mac_link_spd_sts, - .get_mac_rx_pause_sts = rtl839x_get_mac_rx_pause_sts, - .get_mac_tx_pause_sts = rtl839x_get_mac_tx_pause_sts, - .mac = RTL839X_MAC, - .l2_tbl_flush_ctrl = RTL839X_L2_TBL_FLUSH_CTRL, + u16 rxrings; + u16 rxringlen; }; extern int rtl838x_phy_init(struct rtl838x_eth_priv *priv); extern int rtl838x_read_sds_phy(int phy_addr, int phy_reg); extern int rtl839x_read_sds_phy(int phy_addr, int phy_reg); extern int rtl839x_write_sds_phy(int phy_addr, int phy_reg, u16 v); +extern int rtl930x_read_sds_phy(int phy_addr, int page, int phy_reg); +extern int rtl930x_write_sds_phy(int phy_addr, int page, int phy_reg, u16 v); +extern int rtl930x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val); +extern int rtl930x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val); + +/* + * On the RTL93XX, the RTL93XX_DMA_IF_RX_RING_CNTR track the fill level of + * the rings. Writing x into these registers substracts x from its content. + * When the content reaches the ring size, the ASIC no longer adds + * packets to this receive queue. + */ +void rtl838x_update_cntr(int r, int released) +{ + // This feature is not available on RTL838x SoCs +} + +void rtl839x_update_cntr(int r, int released) +{ + // This feature is not available on RTL839x SoCs +} + +void rtl930x_update_cntr(int r, int released) +{ + int pos = (r % 3) * 10; + u32 reg = RTL930X_DMA_IF_RX_RING_CNTR + ((r / 3) << 2); + u32 v = sw_r32(reg); + + v = (v >> pos) & 0x3ff; + pr_debug("RX: Work done %d, old value: %d, pos %d, reg %04x\n", released, v, pos, reg); + sw_w32_mask(0x3ff << pos, released << pos, reg); + sw_w32(v, reg); +} + +void rtl931x_update_cntr(int r, int released) +{ + int pos = (r % 3) * 10; + u32 reg = RTL931X_DMA_IF_RX_RING_CNTR + ((r / 3) << 2); + + sw_w32_mask(0x3ff << pos, released << pos, reg); +} + +struct dsa_tag { + u8 reason; + u8 queue; + u16 port; + u8 l2_offloaded; + u8 prio; +}; + +bool rtl838x_decode_tag(struct p_hdr *h, struct dsa_tag *t) +{ + t->reason = h->cpu_tag[3] & 0xf; + if (t->reason != 15) + pr_debug("Reason: %d\n", t->reason); + t->queue = (h->cpu_tag[0] & 0xe0) >> 5; + if (t->reason != 4) // NIC_RX_REASON_SPECIAL_TRAP + t->l2_offloaded = 1; + else + t->l2_offloaded = 0; + t->port = h->cpu_tag[1] & 0x1f; + + return t->l2_offloaded; +} + +bool rtl839x_decode_tag(struct p_hdr *h, struct dsa_tag *t) +{ + t->reason = h->cpu_tag[4] & 0x1f; + if (t->reason != 31) + pr_debug("Reason: %d\n", t->reason); + t->queue = (h->cpu_tag[3] & 0xe000) >> 13; + if ((t->reason != 7) && (t->reason != 8)) // NIC_RX_REASON_RMA_USR + t->l2_offloaded = 1; + else + t->l2_offloaded = 0; + + t->port = h->cpu_tag[1] & 0x3f; + + return t->l2_offloaded; +} + +bool rtl931x_decode_tag(struct p_hdr *h, struct dsa_tag *t) +{ + t->reason = h->cpu_tag[7] & 0x3f; + pr_debug("Reason %d\n", t->reason); + t->queue = (h->cpu_tag[2] >> 11) & 0x1f; + if (t->reason >= 19 && t->reason <= 27) + t->l2_offloaded = 0; + else + t->l2_offloaded = 1; + t->port = (h->cpu_tag[0] >> 8) & 0x3f; + + return t->l2_offloaded; +} + +bool rtl930x_decode_tag(struct p_hdr *h, struct dsa_tag *t) +{ + rtl931x_decode_tag(h, t); + t->port &= 0x1f; + return t->l2_offloaded; +} /* * Discard the RX ring-buffers, called as part of the net-ISR * when the buffer runs over * Caller needs to hold priv->lock */ -static void rtl838x_rb_cleanup(struct rtl838x_eth_priv *priv) +static void rtl838x_rb_cleanup(struct rtl838x_eth_priv *priv, int status) { int r; u32 *last; struct p_hdr *h; struct ring_b *ring = priv->membase; - for (r = 0; r < RXRINGS; r++) { - last = (u32 *)KSEG1ADDR(sw_r32(priv->r->dma_if_rx_cur(r))); + for (r = 0; r < priv->rxrings; r++) { + pr_debug("In %s working on r: %d\n", __func__, r); + last = (u32 *)KSEG1ADDR(sw_r32(priv->r->dma_if_rx_cur + r * 4)); do { if ((ring->rx_r[r][ring->c_rx[r]] & 0x1)) break; + pr_debug("Got something: %d\n", ring->c_rx[r]); h = &ring->rx_header[r][ring->c_rx[r]]; + memset(h, 0, sizeof(struct p_hdr)); h->buf = (u8 *)KSEG1ADDR(ring->rx_space - + r * ring->c_rx[r] * RING_BUFFER); + + r * priv->rxringlen * RING_BUFFER + + ring->c_rx[r] * RING_BUFFER); h->size = RING_BUFFER; - h->len = 0; /* make sure the header is visible to the ASIC */ mb(); ring->rx_r[r][ring->c_rx[r]] = KSEG1ADDR(h) | 0x1 - | (ring->c_rx[r] == (RXRINGLEN - 1) ? WRAP : 0x1); - ring->c_rx[r] = (ring->c_rx[r] + 1) % RXRINGLEN; + | (ring->c_rx[r] == (priv->rxringlen - 1) ? WRAP : 0x1); + ring->c_rx[r] = (ring->c_rx[r] + 1) % priv->rxringlen; } while (&ring->rx_r[r][ring->c_rx[r]] != last); } } @@ -229,25 +331,25 @@ struct fdb_update_work { void rtl838x_fdb_sync(struct work_struct *work) { - const struct fdb_update_work *uw = - container_of(work, struct fdb_update_work, work); - struct switchdev_notifier_fdb_info info; - u8 addr[ETH_ALEN]; - int i = 0; - int action; - - while (uw->macs[i]) { - action = (uw->macs[i] & (1ULL << 63)) ? SWITCHDEV_FDB_ADD_TO_BRIDGE - : SWITCHDEV_FDB_DEL_TO_BRIDGE; - u64_to_ether_addr(uw->macs[i] & 0xffffffffffffULL, addr); - info.addr = &addr[0]; - info.vid = 0; - info.offloaded = 1; - pr_debug("FDB entry %d: %llx, action %d\n", i, uw->macs[0], action); - call_switchdev_notifiers(action, uw->ndev, &info.info, NULL); - i++; - } - kfree(work); + const struct fdb_update_work *uw = + container_of(work, struct fdb_update_work, work); + struct switchdev_notifier_fdb_info info; + u8 addr[ETH_ALEN]; + int i = 0; + int action; + + while (uw->macs[i]) { + action = (uw->macs[i] & (1ULL << 63)) ? SWITCHDEV_FDB_ADD_TO_BRIDGE + : SWITCHDEV_FDB_DEL_TO_BRIDGE; + u64_to_ether_addr(uw->macs[i] & 0xffffffffffffULL, addr); + info.addr = &addr[0]; + info.vid = 0; + info.offloaded = 1; + pr_debug("FDB entry %d: %llx, action %d\n", i, uw->macs[0], action); + call_switchdev_notifiers(action, uw->ndev, &info.info, NULL); + i++; + } + kfree(work); } static void rtl839x_l2_notification_handler(struct rtl838x_eth_priv *priv) @@ -288,19 +390,20 @@ static void rtl839x_l2_notification_handler(struct rtl838x_eth_priv *priv) priv->lastEvent = e; } -static irqreturn_t rtl838x_net_irq(int irq, void *dev_id) +static irqreturn_t rtl83xx_net_irq(int irq, void *dev_id) { struct net_device *dev = dev_id; struct rtl838x_eth_priv *priv = netdev_priv(dev); u32 status = sw_r32(priv->r->dma_if_intr_sts); bool triggered = false; u32 atk = sw_r32(RTL838X_ATK_PRVNT_STS); + int i; u32 storm_uc = sw_r32(RTL838X_STORM_CTRL_PORT_UC_EXCEED); u32 storm_mc = sw_r32(RTL838X_STORM_CTRL_PORT_MC_EXCEED); u32 storm_bc = sw_r32(RTL838X_STORM_CTRL_PORT_BC_EXCEED); + pr_debug("IRQ: %08x\n", status); if (storm_uc || storm_mc || storm_bc) { - pr_warn("Storm control UC: %08x, MC: %08x, BC: %08x\n", storm_uc, storm_mc, storm_bc); @@ -325,20 +428,23 @@ static irqreturn_t rtl838x_net_irq(int irq, void *dev_id) /* RX interrupt */ if (status & 0x0ff00) { - /* Disable RX interrupt */ - if (triggered) - pr_info("RX\n"); - sw_w32_mask(0xff00, 0, priv->r->dma_if_intr_msk); - sw_w32(0x0000ff00, priv->r->dma_if_intr_sts); - napi_schedule(&priv->napi); + /* ACK and disable RX interrupt for this ring */ + sw_w32_mask(0xff00 & status, 0, priv->r->dma_if_intr_msk); + sw_w32(0x0000ff00 & status, priv->r->dma_if_intr_sts); + for (i = 0; i < priv->rxrings; i++) { + if (status & BIT(i + 8)) { + pr_debug("Scheduling queue: %d\n", i); + napi_schedule(&priv->rx_qs[i].napi); + } + } } /* RX buffer overrun */ if (status & 0x000ff) { pr_info("RX buffer overrun: status %x, mask: %x\n", status, sw_r32(priv->r->dma_if_intr_msk)); - sw_w32(0x000000ff, priv->r->dma_if_intr_sts); - rtl838x_rb_cleanup(priv); + sw_w32(status, priv->r->dma_if_intr_sts); + rtl838x_rb_cleanup(priv, status & 0xff); } if (priv->family_id == RTL8390_FAMILY_ID && status & 0x00100000) { @@ -360,14 +466,185 @@ static irqreturn_t rtl838x_net_irq(int irq, void *dev_id) return IRQ_HANDLED; } +static irqreturn_t rtl93xx_net_irq(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct rtl838x_eth_priv *priv = netdev_priv(dev); + u32 status_rx_r = sw_r32(priv->r->dma_if_intr_rx_runout_sts); + u32 status_rx = sw_r32(priv->r->dma_if_intr_rx_done_sts); + u32 status_tx = sw_r32(priv->r->dma_if_intr_tx_done_sts); + int i; + + pr_debug("In %s, status_tx: %08x, status_rx: %08x, status_rx_r: %08x\n", + __func__, status_tx, status_rx, status_rx_r); + spin_lock(&priv->lock); + + /* Ignore TX interrupt */ + if (status_tx) { + /* Clear ISR */ + pr_debug("TX done\n"); + sw_w32(status_tx, priv->r->dma_if_intr_tx_done_sts); + } + + /* RX interrupt */ + if (status_rx) { + pr_debug("RX IRQ\n"); + /* ACK and disable RX interrupt for given rings */ + sw_w32(status_rx, priv->r->dma_if_intr_rx_done_sts); + sw_w32_mask(status_rx, 0, priv->r->dma_if_intr_rx_done_msk); + for (i = 0; i < priv->rxrings; i++) { + if (status_rx & BIT(i)) { + pr_debug("Scheduling queue: %d\n", i); + napi_schedule(&priv->rx_qs[i].napi); + } + } + } + + /* RX buffer overrun */ + if (status_rx_r) { + pr_debug("RX buffer overrun: status %x, mask: %x\n", + status_rx_r, sw_r32(priv->r->dma_if_intr_rx_runout_msk)); + sw_w32(status_rx_r, priv->r->dma_if_intr_rx_runout_sts); + rtl838x_rb_cleanup(priv, status_rx_r); + } + + spin_unlock(&priv->lock); + return IRQ_HANDLED; +} + +static const struct rtl838x_reg rtl838x_reg = { + .net_irq = rtl83xx_net_irq, + .mac_port_ctrl = rtl838x_mac_port_ctrl, + .dma_if_intr_sts = RTL838X_DMA_IF_INTR_STS, + .dma_if_intr_msk = RTL838X_DMA_IF_INTR_MSK, + .dma_if_ctrl = RTL838X_DMA_IF_CTRL, + .mac_force_mode_ctrl = RTL838X_MAC_FORCE_MODE_CTRL, + .dma_rx_base = RTL838X_DMA_RX_BASE, + .dma_tx_base = RTL838X_DMA_TX_BASE, + .dma_if_rx_ring_size = rtl838x_dma_if_rx_ring_size, + .dma_if_rx_ring_cntr = rtl838x_dma_if_rx_ring_cntr, + .dma_if_rx_cur = RTL838X_DMA_IF_RX_CUR, + .rst_glb_ctrl = RTL838X_RST_GLB_CTRL_0, + .get_mac_link_sts = rtl838x_get_mac_link_sts, + .get_mac_link_dup_sts = rtl838x_get_mac_link_dup_sts, + .get_mac_link_spd_sts = rtl838x_get_mac_link_spd_sts, + .get_mac_rx_pause_sts = rtl838x_get_mac_rx_pause_sts, + .get_mac_tx_pause_sts = rtl838x_get_mac_tx_pause_sts, + .mac = RTL838X_MAC, + .l2_tbl_flush_ctrl = RTL838X_L2_TBL_FLUSH_CTRL, + .update_cntr = rtl838x_update_cntr, + .create_tx_header = rtl838x_create_tx_header, + .decode_tag = rtl838x_decode_tag, +}; + +static const struct rtl838x_reg rtl839x_reg = { + .net_irq = rtl83xx_net_irq, + .mac_port_ctrl = rtl839x_mac_port_ctrl, + .dma_if_intr_sts = RTL839X_DMA_IF_INTR_STS, + .dma_if_intr_msk = RTL839X_DMA_IF_INTR_MSK, + .dma_if_ctrl = RTL839X_DMA_IF_CTRL, + .mac_force_mode_ctrl = RTL839X_MAC_FORCE_MODE_CTRL, + .dma_rx_base = RTL839X_DMA_RX_BASE, + .dma_tx_base = RTL839X_DMA_TX_BASE, + .dma_if_rx_ring_size = rtl839x_dma_if_rx_ring_size, + .dma_if_rx_ring_cntr = rtl839x_dma_if_rx_ring_cntr, + .dma_if_rx_cur = RTL839X_DMA_IF_RX_CUR, + .rst_glb_ctrl = RTL839X_RST_GLB_CTRL, + .get_mac_link_sts = rtl839x_get_mac_link_sts, + .get_mac_link_dup_sts = rtl839x_get_mac_link_dup_sts, + .get_mac_link_spd_sts = rtl839x_get_mac_link_spd_sts, + .get_mac_rx_pause_sts = rtl839x_get_mac_rx_pause_sts, + .get_mac_tx_pause_sts = rtl839x_get_mac_tx_pause_sts, + .mac = RTL839X_MAC, + .l2_tbl_flush_ctrl = RTL839X_L2_TBL_FLUSH_CTRL, + .update_cntr = rtl839x_update_cntr, + .create_tx_header = rtl839x_create_tx_header, + .decode_tag = rtl839x_decode_tag, +}; + +static const struct rtl838x_reg rtl930x_reg = { + .net_irq = rtl93xx_net_irq, + .mac_port_ctrl = rtl930x_mac_port_ctrl, + .dma_if_intr_rx_runout_sts = RTL930X_DMA_IF_INTR_RX_RUNOUT_STS, + .dma_if_intr_rx_done_sts = RTL930X_DMA_IF_INTR_RX_DONE_STS, + .dma_if_intr_tx_done_sts = RTL930X_DMA_IF_INTR_TX_DONE_STS, + .dma_if_intr_rx_runout_msk = RTL930X_DMA_IF_INTR_RX_RUNOUT_MSK, + .dma_if_intr_rx_done_msk = RTL930X_DMA_IF_INTR_RX_DONE_MSK, + .dma_if_intr_tx_done_msk = RTL930X_DMA_IF_INTR_TX_DONE_MSK, + .l2_ntfy_if_intr_sts = RTL930X_L2_NTFY_IF_INTR_STS, + .l2_ntfy_if_intr_msk = RTL930X_L2_NTFY_IF_INTR_MSK, + .dma_if_ctrl = RTL930X_DMA_IF_CTRL, + .mac_force_mode_ctrl = RTL930X_MAC_FORCE_MODE_CTRL, + .dma_rx_base = RTL930X_DMA_RX_BASE, + .dma_tx_base = RTL930X_DMA_TX_BASE, + .dma_if_rx_ring_size = rtl930x_dma_if_rx_ring_size, + .dma_if_rx_ring_cntr = rtl930x_dma_if_rx_ring_cntr, + .dma_if_rx_cur = RTL930X_DMA_IF_RX_CUR, + .rst_glb_ctrl = RTL930X_RST_GLB_CTRL_0, + .get_mac_link_sts = rtl930x_get_mac_link_sts, + .get_mac_link_dup_sts = rtl930x_get_mac_link_dup_sts, + .get_mac_link_spd_sts = rtl930x_get_mac_link_spd_sts, + .get_mac_rx_pause_sts = rtl930x_get_mac_rx_pause_sts, + .get_mac_tx_pause_sts = rtl930x_get_mac_tx_pause_sts, + .mac = RTL930X_MAC_L2_ADDR_CTRL, + .l2_tbl_flush_ctrl = RTL930X_L2_TBL_FLUSH_CTRL, + .update_cntr = rtl930x_update_cntr, + .create_tx_header = rtl930x_create_tx_header, + .decode_tag = rtl930x_decode_tag, +}; + +static const struct rtl838x_reg rtl931x_reg = { + .net_irq = rtl93xx_net_irq, + .mac_port_ctrl = rtl931x_mac_port_ctrl, + .dma_if_intr_rx_runout_sts = RTL931X_DMA_IF_INTR_RX_RUNOUT_STS, + .dma_if_intr_rx_done_sts = RTL931X_DMA_IF_INTR_RX_DONE_STS, + .dma_if_intr_tx_done_sts = RTL931X_DMA_IF_INTR_TX_DONE_STS, + .dma_if_intr_rx_runout_msk = RTL931X_DMA_IF_INTR_RX_RUNOUT_MSK, + .dma_if_intr_rx_done_msk = RTL931X_DMA_IF_INTR_RX_DONE_MSK, + .dma_if_intr_tx_done_msk = RTL931X_DMA_IF_INTR_TX_DONE_MSK, + .l2_ntfy_if_intr_sts = RTL931X_L2_NTFY_IF_INTR_STS, + .l2_ntfy_if_intr_msk = RTL931X_L2_NTFY_IF_INTR_MSK, + .dma_if_ctrl = RTL931X_DMA_IF_CTRL, + .mac_force_mode_ctrl = RTL931X_MAC_FORCE_MODE_CTRL, + .dma_rx_base = RTL931X_DMA_RX_BASE, + .dma_tx_base = RTL931X_DMA_TX_BASE, + .dma_if_rx_ring_size = rtl931x_dma_if_rx_ring_size, + .dma_if_rx_ring_cntr = rtl931x_dma_if_rx_ring_cntr, + .dma_if_rx_cur = RTL931X_DMA_IF_RX_CUR, + .rst_glb_ctrl = RTL931X_RST_GLB_CTRL, + .get_mac_link_sts = rtl931x_get_mac_link_sts, + .get_mac_link_dup_sts = rtl931x_get_mac_link_dup_sts, + .get_mac_link_spd_sts = rtl931x_get_mac_link_spd_sts, + .get_mac_rx_pause_sts = rtl931x_get_mac_rx_pause_sts, + .get_mac_tx_pause_sts = rtl931x_get_mac_tx_pause_sts, + .mac = RTL931X_MAC_L2_ADDR_CTRL, + .l2_tbl_flush_ctrl = RTL931X_L2_TBL_FLUSH_CTRL, + .update_cntr = rtl931x_update_cntr, + .create_tx_header = rtl931x_create_tx_header, + .decode_tag = rtl931x_decode_tag, +}; + static void rtl838x_hw_reset(struct rtl838x_eth_priv *priv) { u32 int_saved, nbuf; - + int i, pos; + pr_info("RESETTING %x, CPU_PORT %d\n", priv->family_id, priv->cpu_port); - /* Stop TX/RX */ sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(priv->cpu_port)); - mdelay(500); + mdelay(100); + + /* Disable and clear interrupts */ + if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) { + sw_w32(0x00000000, priv->r->dma_if_intr_rx_runout_msk); + sw_w32(0xffffffff, priv->r->dma_if_intr_rx_runout_sts); + sw_w32(0x00000000, priv->r->dma_if_intr_rx_done_msk); + sw_w32(0xffffffff, priv->r->dma_if_intr_rx_done_sts); + sw_w32(0x00000000, priv->r->dma_if_intr_tx_done_msk); + sw_w32(0x0000000f, priv->r->dma_if_intr_tx_done_sts); + } else { + sw_w32(0x00000000, priv->r->dma_if_intr_msk); + sw_w32(0xffffffff, priv->r->dma_if_intr_sts); + } if (priv->family_id == RTL8390_FAMILY_ID) { /* Preserve L2 notification and NBUF settings */ @@ -382,18 +659,31 @@ static void rtl838x_hw_reset(struct rtl838x_eth_priv *priv) sw_w32(0xffffffff, priv->r->dma_if_intr_sts); } - /* Reset NIC and Queue */ - sw_w32(0x08, priv->r->rst_glb_ctrl); - if (priv->family_id == RTL8390_FAMILY_ID) - sw_w32(0xffffffff, RTL839X_DMA_IF_RX_RING_CNTR); - do { /* Reset NIC */ - udelay(20); - } while (sw_r32(priv->r->rst_glb_ctrl) & 0x08); - do { /* Reset Queues */ + /* Reset NIC */ + if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) + sw_w32(0x4, priv->r->rst_glb_ctrl); + else + sw_w32(0x8, priv->r->rst_glb_ctrl); + + do { /* Wait for reset of NIC and Queues done */ udelay(20); - } while (sw_r32(priv->r->rst_glb_ctrl) & 0x04); + } while (sw_r32(priv->r->rst_glb_ctrl) & 0xc); mdelay(100); + /* Setup Head of Line */ + if (priv->family_id == RTL8380_FAMILY_ID) + sw_w32(0, RTL838X_DMA_IF_RX_RING_SIZE); // Disabled on RTL8380 + if (priv->family_id == RTL8390_FAMILY_ID) + sw_w32(0xffffffff, RTL839X_DMA_IF_RX_RING_CNTR); + if (priv->family_id == RTL9300_FAMILY_ID) { + for (i = 0; i < priv->rxrings; i++) { + pos = (i % 3) * 10; + sw_w32_mask(0x3ff << pos, 0, priv->r->dma_if_rx_ring_size(i)); + sw_w32_mask(0x3ff << pos, priv->rxringlen, + priv->r->dma_if_rx_ring_cntr(i)); + } + } + /* Re-enable link change interrupt */ if (priv->family_id == RTL8390_FAMILY_ID) { sw_w32(0xffffffff, RTL839X_ISR_PORT_LINK_STS_CHG); @@ -405,32 +695,6 @@ static void rtl838x_hw_reset(struct rtl838x_eth_priv *priv) sw_w32_mask(7 << 20, int_saved & (7 << 20), priv->r->dma_if_intr_msk); sw_w32(nbuf, RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL); } - - /* Restart TX/RX to CPU port */ - sw_w32_mask(0x0, 0x3, priv->r->mac_port_ctrl(priv->cpu_port)); - - if (priv->family_id == RTL8380_FAMILY_ID) { - /* Set Speed, duplex, flow control - * FORCE_EN | LINK_EN | NWAY_EN | DUP_SEL - * | SPD_SEL = 0b10 | FORCE_FC_EN | PHY_MASTER_SLV_MANUAL_EN - * | MEDIA_SEL - */ - sw_w32(0x6192F, priv->r->mac_force_mode_ctrl(priv->cpu_port)); - /* allow CRC errors on CPU-port */ - sw_w32_mask(0, 0x8, priv->r->mac_port_ctrl(priv->cpu_port)); - } else { - /* CPU port joins Lookup Miss Flooding Portmask */ - sw_w32(0x28000, RTL839X_TBL_ACCESS_L2_CTRL); - sw_w32_mask(0, 0x80000000, RTL839X_TBL_ACCESS_L2_DATA(0)); - sw_w32(0x38000, RTL839X_TBL_ACCESS_L2_CTRL); - - /* Force CPU port link up */ - sw_w32_mask(0, 3, priv->r->mac_force_mode_ctrl(priv->cpu_port)); - } - - /* Disable and clear interrupts */ - sw_w32(0x00000000, priv->r->dma_if_intr_msk); - sw_w32(0xffffffff, priv->r->dma_if_intr_sts); } static void rtl838x_hw_ring_setup(struct rtl838x_eth_priv *priv) @@ -438,11 +702,11 @@ static void rtl838x_hw_ring_setup(struct rtl838x_eth_priv *priv) int i; struct ring_b *ring = priv->membase; - for (i = 0; i < RXRINGS; i++) - sw_w32(KSEG1ADDR(&ring->rx_r[i]), priv->r->dma_rx_base(i)); + for (i = 0; i < priv->rxrings; i++) + sw_w32(KSEG1ADDR(&ring->rx_r[i]), priv->r->dma_rx_base + i * 4); for (i = 0; i < TXRINGS; i++) - sw_w32(KSEG1ADDR(&ring->tx_r[i]), priv->r->dma_tx_base(i)); + sw_w32(KSEG1ADDR(&ring->tx_r[i]), priv->r->dma_tx_base + i * 4); } static void rtl838x_hw_en_rxtx(struct rtl838x_eth_priv *priv) @@ -456,8 +720,19 @@ static void rtl838x_hw_en_rxtx(struct rtl838x_eth_priv *priv) /* Enable RX done, RX overflow and TX done interrupts */ sw_w32(0xfffff, priv->r->dma_if_intr_msk); - /* Enable traffic, engine expects empty FCS field */ + /* Enable DMA, engine expects empty FCS field */ sw_w32_mask(0, RX_EN | TX_EN, priv->r->dma_if_ctrl); + + /* Restart TX/RX to CPU port */ + sw_w32_mask(0x0, 0x3, priv->r->mac_port_ctrl(priv->cpu_port)); + /* Set Speed, duplex, flow control + * FORCE_EN | LINK_EN | NWAY_EN | DUP_SEL + * | SPD_SEL = 0b10 | FORCE_FC_EN | PHY_MASTER_SLV_MANUAL_EN + * | MEDIA_SEL + */ + sw_w32(0x6192F, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); + /* allow CRC errors on CPU-port */ + sw_w32_mask(0, 0x8, priv->r->mac_port_ctrl(priv->cpu_port)); } static void rtl839x_hw_en_rxtx(struct rtl838x_eth_priv *priv) @@ -468,27 +743,71 @@ static void rtl839x_hw_en_rxtx(struct rtl838x_eth_priv *priv) /* Enable Notify, RX done, RX overflow and TX done interrupts */ sw_w32(0x007fffff, priv->r->dma_if_intr_msk); // Notify IRQ! - /* Enable traffic */ + /* Enable DMA */ sw_w32_mask(0, RX_EN | TX_EN, priv->r->dma_if_ctrl); + + /* Restart TX/RX to CPU port */ + sw_w32_mask(0x0, 0x3, priv->r->mac_port_ctrl(priv->cpu_port)); + + /* CPU port joins Lookup Miss Flooding Portmask */ + // TODO: The code below should also work for the RTL838x + sw_w32(0x28000, RTL839X_TBL_ACCESS_L2_CTRL); + sw_w32_mask(0, 0x80000000, RTL839X_TBL_ACCESS_L2_DATA(0)); + sw_w32(0x38000, RTL839X_TBL_ACCESS_L2_CTRL); + + /* Force CPU port link up */ + sw_w32_mask(0, 3, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); } -static void rtl838x_setup_ring_buffer(struct ring_b *ring) +static void rtl93xx_hw_en_rxtx(struct rtl838x_eth_priv *priv) +{ + int i, pos; + u32 v; + + /* Setup CPU-Port: RX Buffer truncated at 1600 Bytes */ + sw_w32(0x06400040, priv->r->dma_if_ctrl); + + for (i = 0; i < priv->rxrings; i++) { + pos = (i % 3) * 10; + sw_w32_mask(0x3ff << pos, priv->rxringlen << pos, priv->r->dma_if_rx_ring_size(i)); + + // Some SoCs have issues with missing underflow protection + v = (sw_r32(priv->r->dma_if_rx_ring_cntr(i)) >> pos) & 0x3ff; + sw_w32_mask(0x3ff << pos, v, priv->r->dma_if_rx_ring_cntr(i)); + } + + /* Enable Notify, RX done, RX overflow and TX done interrupts */ + sw_w32(0xffffffff, priv->r->dma_if_intr_rx_runout_msk); + sw_w32(0xffffffff, priv->r->dma_if_intr_rx_done_msk); + sw_w32(0x0000000f, priv->r->dma_if_intr_tx_done_msk); + + /* Enable DMA */ + sw_w32_mask(0, RX_EN_93XX | TX_EN_93XX, priv->r->dma_if_ctrl); + + /* Restart TX/RX to CPU port */ + sw_w32_mask(0x0, 0x3, priv->r->mac_port_ctrl(priv->cpu_port)); + + sw_w32_mask(0, BIT(priv->cpu_port), RTL930X_L2_UNKN_UC_FLD_PMSK); + sw_w32(0x217, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); +} + +static void rtl838x_setup_ring_buffer(struct rtl838x_eth_priv *priv, struct ring_b *ring) { int i, j; struct p_hdr *h; - for (i = 0; i < RXRINGS; i++) { - for (j = 0; j < RXRINGLEN; j++) { + for (i = 0; i < priv->rxrings; i++) { + for (j = 0; j < priv->rxringlen; j++) { h = &ring->rx_header[i][j]; - h->buf = (u8 *)KSEG1ADDR(ring->rx_space + i * j * RING_BUFFER); - h->reserved = 0; + memset(h, 0, sizeof(struct p_hdr)); + h->buf = (u8 *)KSEG1ADDR(ring->rx_space + + i * priv->rxringlen * RING_BUFFER + + j * RING_BUFFER); h->size = RING_BUFFER; - h->offset = 0; - h->len = 0; - memset(&h->cpu_tag, 0, sizeof(uint16_t[5])); /* All rings owned by switch, last one wraps */ - ring->rx_r[i][j] = KSEG1ADDR(h) | 1 | (j == (RXRINGLEN - 1) ? WRAP : 0); + ring->rx_r[i][j] = KSEG1ADDR(h) | 1 + | (j == (priv->rxringlen - 1) ? WRAP : 0); } ring->c_rx[i] = 0; } @@ -496,12 +815,11 @@ static void rtl838x_setup_ring_buffer(struct ring_b *ring) for (i = 0; i < TXRINGS; i++) { for (j = 0; j < TXRINGLEN; j++) { h = &ring->tx_header[i][j]; - h->buf = (u8 *)KSEG1ADDR(ring->tx_space + i * j * RING_BUFFER); - h->reserved = 0; + memset(h, 0, sizeof(struct p_hdr)); + h->buf = (u8 *)KSEG1ADDR(ring->tx_space + + i * TXRINGLEN * RING_BUFFER + + j * RING_BUFFER); h->size = RING_BUFFER; - h->offset = 0; - h->len = 0; - memset(&h->cpu_tag, 0, sizeof(uint16_t[5])); ring->tx_r[i][j] = KSEG1ADDR(&ring->tx_header[i][j]); } /* Last header is wrapping around */ @@ -535,13 +853,14 @@ static int rtl838x_eth_open(struct net_device *ndev) unsigned long flags; struct rtl838x_eth_priv *priv = netdev_priv(ndev); struct ring_b *ring = priv->membase; - int err; + int i, err; - pr_info("%s called: RX rings %d, TX rings %d\n", __func__, RXRINGS, TXRINGS); + pr_info("%s called: RX rings %d(length %d), TX rings %d(length %d)\n", + __func__, priv->rxrings, priv->rxringlen, TXRINGS, TXRINGLEN); spin_lock_irqsave(&priv->lock, flags); rtl838x_hw_reset(priv); - rtl838x_setup_ring_buffer(ring); + rtl838x_setup_ring_buffer(priv, ring); if (priv->family_id == RTL8390_FAMILY_ID) { rtl839x_setup_notify_ring_buffer(priv); /* Make sure the ring structure is visible to the ASIC */ @@ -550,8 +869,7 @@ static int rtl838x_eth_open(struct net_device *ndev) } rtl838x_hw_ring_setup(priv); - err = request_irq(ndev->irq, rtl838x_net_irq, IRQF_SHARED, - ndev->name, ndev); + err = request_irq(ndev->irq, priv->r->net_irq, IRQF_SHARED, ndev->name, ndev); if (err) { netdev_err(ndev, "%s: could not acquire interrupt: %d\n", __func__, err); @@ -559,21 +877,39 @@ static int rtl838x_eth_open(struct net_device *ndev) } phylink_start(priv->phylink); - napi_enable(&priv->napi); - netif_start_queue(ndev); + for (i = 0; i < priv->rxrings; i++) + napi_enable(&priv->rx_qs[i].napi); - if (priv->family_id == RTL8380_FAMILY_ID) { + switch (priv->family_id) { + case RTL8380_FAMILY_ID: rtl838x_hw_en_rxtx(priv); /* Trap IGMP traffic to CPU-Port */ sw_w32(0x3, RTL838X_SPCL_TRAP_IGMP_CTRL); /* Flush learned FDB entries on link down of a port */ - sw_w32_mask(0, 1 << 7, RTL838X_L2_CTRL_0); - } else { + sw_w32_mask(0, BIT(7), RTL838X_L2_CTRL_0); + break; + case RTL8390_FAMILY_ID: rtl839x_hw_en_rxtx(priv); sw_w32(0x3, RTL839X_SPCL_TRAP_IGMP_CTRL); - sw_w32_mask(0, 1 << 7, RTL839X_L2_CTRL_0); + /* Flush learned FDB entries on link down of a port */ + sw_w32_mask(0, BIT(7), RTL839X_L2_CTRL_0); + break; + case RTL9300_FAMILY_ID: + rtl93xx_hw_en_rxtx(priv); + /* Flush learned FDB entries on link down of a port */ + sw_w32_mask(0, BIT(7), RTL930X_L2_CTRL); + sw_w32_mask(BIT(28), 0, RTL930X_L2_PORT_SABLK_CTRL); + sw_w32_mask(BIT(28), 0, RTL930X_L2_PORT_DABLK_CTRL); + break; + + case RTL9310_FAMILY_ID: + rtl93xx_hw_en_rxtx(priv); +// TODO: Add trapping of IGMP frames to CPU-port + break; } + netif_tx_start_all_queues(ndev); + spin_unlock_irqrestore(&priv->lock, flags); return 0; @@ -581,10 +917,20 @@ static int rtl838x_eth_open(struct net_device *ndev) static void rtl838x_hw_stop(struct rtl838x_eth_priv *priv) { - u32 force_mac = priv->family_id == RTL8380_FAMILY_ID ? 0x6192D : 0x75; + u32 force_mac = priv->family_id == RTL8380_FAMILY_ID ? 0x6192C : 0x75; u32 clear_irq = priv->family_id == RTL8380_FAMILY_ID ? 0x000fffff : 0x007fffff; int i; + // Disable RX/TX from/to CPU-port + sw_w32_mask(0x3, 0, priv->r->mac_port_ctrl(priv->cpu_port)); + + /* Disable traffic */ + if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) + sw_w32_mask(RX_EN_93XX | TX_EN_93XX, 0, priv->r->dma_if_ctrl); + else + sw_w32_mask(RX_EN | TX_EN, 0, priv->r->dma_if_ctrl); + mdelay(200); // Test, whether this is needed + /* Block all ports */ if (priv->family_id == RTL8380_FAMILY_ID) { sw_w32(0x03000000, RTL838X_TBL_ACCESS_DATA_0(0)); @@ -598,24 +944,33 @@ static void rtl838x_hw_stop(struct rtl838x_eth_priv *priv) sw_w32(1 << 26 | 1 << 23 | i << 5, priv->r->l2_tbl_flush_ctrl); do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & (1 << 26)); } - } else { + } else if (priv->family_id == RTL8390_FAMILY_ID) { for (i = 0; i <= priv->cpu_port; i++) { sw_w32(1 << 28 | 1 << 25 | i << 5, priv->r->l2_tbl_flush_ctrl); do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & (1 << 28)); } } + // TODO: L2 flush register is 64 bit on RTL931X and 930X /* CPU-Port: Link down */ - sw_w32(force_mac, priv->r->mac_force_mode_ctrl(priv->cpu_port)); + if (priv->family_id == RTL8380_FAMILY_ID || priv->family_id == RTL8390_FAMILY_ID) + sw_w32(force_mac, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); + else + sw_w32_mask(0x3, 0, priv->r->mac_force_mode_ctrl + priv->cpu_port *4); mdelay(100); - /* Disable traffic */ - sw_w32_mask(RX_EN | TX_EN, 0, priv->r->dma_if_ctrl); - mdelay(200); // Test, whether this is needed - /* Disable all TX/RX interrupts */ - sw_w32(0x00000000, priv->r->dma_if_intr_msk); - sw_w32(clear_irq, priv->r->dma_if_intr_sts); + if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) { + sw_w32(0x00000000, priv->r->dma_if_intr_rx_runout_msk); + sw_w32(0xffffffff, priv->r->dma_if_intr_rx_runout_sts); + sw_w32(0x00000000, priv->r->dma_if_intr_rx_done_msk); + sw_w32(0xffffffff, priv->r->dma_if_intr_rx_done_sts); + sw_w32(0x00000000, priv->r->dma_if_intr_tx_done_msk); + sw_w32(0x0000000f, priv->r->dma_if_intr_tx_done_sts); + } else { + sw_w32(0x00000000, priv->r->dma_if_intr_msk); + sw_w32(clear_irq, priv->r->dma_if_intr_sts); + } /* Disable TX/RX DMA */ sw_w32(0x00000000, priv->r->dma_if_ctrl); @@ -625,6 +980,7 @@ static void rtl838x_hw_stop(struct rtl838x_eth_priv *priv) static int rtl838x_eth_stop(struct net_device *ndev) { unsigned long flags; + int i; struct rtl838x_eth_priv *priv = netdev_priv(ndev); pr_info("in %s\n", __func__); @@ -633,8 +989,12 @@ static int rtl838x_eth_stop(struct net_device *ndev) phylink_stop(priv->phylink); rtl838x_hw_stop(priv); free_irq(ndev->irq, ndev); - napi_disable(&priv->napi); - netif_stop_queue(ndev); + + for (i = 0; i < priv->rxrings; i++) + napi_disable(&priv->rx_qs[i].napi); + + netif_tx_stop_all_queues(ndev); + spin_unlock_irqrestore(&priv->lock, flags); return 0; @@ -680,12 +1040,50 @@ static void rtl838x_eth_set_multicast_list(struct net_device *ndev) } } +static void rtl930x_eth_set_multicast_list(struct net_device *ndev) +{ + if (!(ndev->flags & (IFF_PROMISC | IFF_ALLMULTI))) { + sw_w32(0x0, RTL930X_RMA_CTRL_0); + sw_w32(0x0, RTL930X_RMA_CTRL_1); + sw_w32(0x0, RTL930X_RMA_CTRL_2); + } + if (ndev->flags & IFF_ALLMULTI) { + sw_w32(0x7fffffff, RTL930X_RMA_CTRL_0); + sw_w32(0x7fffffff, RTL930X_RMA_CTRL_1); + sw_w32(0x7fffffff, RTL930X_RMA_CTRL_2); + } + if (ndev->flags & IFF_PROMISC) { + sw_w32(0x7fffffff, RTL930X_RMA_CTRL_0); + sw_w32(0x7fffffff, RTL930X_RMA_CTRL_1); + sw_w32(0x7fffffff, RTL930X_RMA_CTRL_2); + } +} + +static void rtl931x_eth_set_multicast_list(struct net_device *ndev) +{ + if (!(ndev->flags & (IFF_PROMISC | IFF_ALLMULTI))) { + sw_w32(0x0, RTL931X_RMA_CTRL_0); + sw_w32(0x0, RTL931X_RMA_CTRL_1); + sw_w32(0x0, RTL931X_RMA_CTRL_2); + } + if (ndev->flags & IFF_ALLMULTI) { + sw_w32(0x7fffffff, RTL931X_RMA_CTRL_0); + sw_w32(0x7fffffff, RTL931X_RMA_CTRL_1); + sw_w32(0x7fffffff, RTL931X_RMA_CTRL_2); + } + if (ndev->flags & IFF_PROMISC) { + sw_w32(0x7fffffff, RTL931X_RMA_CTRL_0); + sw_w32(0x7fffffff, RTL931X_RMA_CTRL_1); + sw_w32(0x7fffffff, RTL931X_RMA_CTRL_2); + } +} + static void rtl838x_eth_tx_timeout(struct net_device *ndev) { unsigned long flags; struct rtl838x_eth_priv *priv = netdev_priv(ndev); - pr_info("in %s\n", __func__); + pr_warn("%s\n", __func__); spin_lock_irqsave(&priv->lock, flags); rtl838x_hw_stop(priv); rtl838x_hw_ring_setup(priv); @@ -705,6 +1103,10 @@ static int rtl838x_eth_tx(struct sk_buff *skb, struct net_device *dev) unsigned long flags; struct p_hdr *h; int dest_port = -1; + int q = skb_get_queue_mapping(skb) % TXRINGS; + + if (q) // Check for high prio queue + pr_debug("SKB priority: %d\n", skb->priority); spin_lock_irqsave(&priv->lock, flags); len = skb->len; @@ -729,44 +1131,48 @@ static int rtl838x_eth_tx(struct sk_buff *skb, struct net_device *dev) } /* We can send this packet if CPU owns the descriptor */ - if (!(ring->tx_r[0][ring->c_tx[0]] & 0x1)) { - /* Set descriptor for tx */ - h = &ring->tx_header[0][ring->c_tx[0]]; + if (!(ring->tx_r[q][ring->c_tx[q]] & 0x1)) { - h->buf = (u8 *)KSEG1ADDR(ring->tx_space); + /* Set descriptor for tx */ + h = &ring->tx_header[q][ring->c_tx[q]]; h->size = len; h->len = len; - /* Create cpu_tag */ - if (priv->family_id == RTL8380_FAMILY_ID) - rtl838x_create_tx_header(h, dest_port); - else - rtl839x_create_tx_header(h, dest_port); + priv->r->create_tx_header(h, dest_port, skb->priority >> 1); /* Copy packet data to tx buffer */ memcpy((void *)KSEG1ADDR(h->buf), skb->data, len); /* Make sure packet data is visible to ASIC */ - mb(); /* wmb() probably works, too */ + wmb(); /* Hand over to switch */ - ring->tx_r[0][ring->c_tx[0]] = ring->tx_r[0][ring->c_tx[0]] | 0x1; - - /* BUG: before tx fetch, need to make sure right data is accessed - * This might not be necessary on newer RTL839x, though. - */ - for (i = 0; i < 10; i++) { - val = sw_r32(priv->r->dma_if_ctrl); - if ((val & 0xc) == 0xc) - break; + ring->tx_r[q][ring->c_tx[q]] |= 1; + + // Before starting TX, prevent a Lextra bus bug on RTL8380 SoCs + if (priv->family_id == RTL8380_FAMILY_ID) { + for (i = 0; i < 10; i++) { + val = sw_r32(priv->r->dma_if_ctrl); + if ((val & 0xc) == 0xc) + break; + } } /* Tell switch to send data */ - sw_w32_mask(0, TX_DO, priv->r->dma_if_ctrl); + if (priv->family_id == RTL9310_FAMILY_ID + || priv->family_id == RTL9300_FAMILY_ID) { + // Ring ID q == 0: Low priority, Ring ID = 1: High prio queue + if (!q) + sw_w32_mask(0, BIT(2), priv->r->dma_if_ctrl); + else + sw_w32_mask(0, BIT(3), priv->r->dma_if_ctrl); + } else { + sw_w32_mask(0, TX_DO, priv->r->dma_if_ctrl); + } dev->stats.tx_packets++; dev->stats.tx_bytes += len; dev_kfree_skb(skb); - ring->c_tx[0] = (ring->c_tx[0] + 1) % TXRINGLEN; + ring->c_tx[q] = (ring->c_tx[q] + 1) % TXRINGLEN; ret = NETDEV_TX_OK; } else { dev_warn(&priv->pdev->dev, "Data is owned by switch\n"); @@ -777,6 +1183,30 @@ txdone: return ret; } +/* + * Return queue number for TX. On the RTL83XX, these queues have equal priority + * so we do round-robin + */ +u16 rtl83xx_pick_tx_queue(struct net_device *dev, struct sk_buff *skb, + struct net_device *sb_dev) +{ + static u8 last = 0; + + last++; + return last % TXRINGS; +} + +/* + * Return queue number for TX. On the RTL93XX, queue 1 is the high priority queue + */ +u16 rtl93xx_pick_tx_queue(struct net_device *dev, struct sk_buff *skb, + struct net_device *sb_dev) +{ + if (skb->priority >= TC_PRIO_CONTROL) + return 1; + return 0; +} + static int rtl838x_hw_receive(struct net_device *dev, int r, int budget) { struct rtl838x_eth_priv *priv = netdev_priv(dev); @@ -789,27 +1219,24 @@ static int rtl838x_hw_receive(struct net_device *dev, int r, int budget) u32 *last; struct p_hdr *h; bool dsa = netdev_uses_dsa(dev); + struct dsa_tag tag; spin_lock_irqsave(&priv->lock, flags); - last = (u32 *)KSEG1ADDR(sw_r32(priv->r->dma_if_rx_cur(r))); + last = (u32 *)KSEG1ADDR(sw_r32(priv->r->dma_if_rx_cur + r * 4)); + pr_debug("---------------------------------------------------------- RX - %d\n", r); - if (&ring->rx_r[r][ring->c_rx[r]] == last) { - spin_unlock_irqrestore(&priv->lock, flags); - return 0; - } do { if ((ring->rx_r[r][ring->c_rx[r]] & 0x1)) { - netdev_warn(dev, "WARNING Ring contention: ring %x, last %x, current %x, cPTR %x, ISR %x\n", r, (uint32_t)last, - (u32) &ring->rx_r[r][ring->c_rx[r]], - ring->rx_r[r][ring->c_rx[r]], - sw_r32(priv->r->dma_if_intr_sts)); + if (&ring->rx_r[r][ring->c_rx[r]] != last) { + netdev_warn(dev, "Ring contention: r: %x, last %x, cur %x\n", + r, (uint32_t)last, (u32) &ring->rx_r[r][ring->c_rx[r]]); + } break; } h = &ring->rx_header[r][ring->c_rx[r]]; data = (u8 *)KSEG1ADDR(h->buf); len = h->len; - if (!len) break; work_done++; @@ -826,7 +1253,7 @@ static int rtl838x_hw_receive(struct net_device *dev, int r, int budget) /* BUG: Prevent bug on RTL838x SoCs*/ if (priv->family_id == RTL8380_FAMILY_ID) { sw_w32(0xffffffff, priv->r->dma_if_rx_ring_size(0)); - for (i = 0; i < RXRINGS; i++) { + for (i = 0; i < priv->rxrings; i++) { /* Update each ring cnt */ val = sw_r32(priv->r->dma_if_rx_ring_cntr(i)); sw_w32(val, priv->r->dma_if_rx_ring_cntr(i)); @@ -839,12 +1266,19 @@ static int rtl838x_hw_receive(struct net_device *dev, int r, int budget) memcpy(skb->data, (u8 *)KSEG1ADDR(data), len); /* Overwrite CRC with cpu_tag */ if (dsa) { + priv->r->decode_tag(h, &tag); skb->data[len-4] = 0x80; - skb->data[len-3] = h->cpu_tag[0] & priv->port_mask; + skb->data[len-3] = tag.port; skb->data[len-2] = 0x10; skb->data[len-1] = 0x00; + if (tag.l2_offloaded) + skb->data[len-3] |= 0x40; } + if (tag.queue >= 0) + pr_debug("Queue: %d, len: %d, reason %d port %d\n", + tag.queue, len, tag.reason, tag.port); + skb->protocol = eth_type_trans(skb, dev); dev->stats.rx_packets++; dev->stats.rx_bytes += len; @@ -856,35 +1290,47 @@ static int rtl838x_hw_receive(struct net_device *dev, int r, int budget) dev->stats.rx_dropped++; } - h->buf = (u8 *)KSEG1ADDR(ring->rx_space - + r * ring->c_rx[r] * RING_BUFFER); + /* Reset header structure */ + memset(h, 0, sizeof(struct p_hdr)); + h->buf = data; h->size = RING_BUFFER; - h->len = 0; - memset(&h->cpu_tag, 0, sizeof(uint16_t[5])); - ring->rx_r[r][ring->c_rx[r]] - = KSEG1ADDR(h) | 0x1 | (ring->c_rx[r] == (RXRINGLEN-1) ? WRAP : 0x1); - ring->c_rx[r] = (ring->c_rx[r] + 1) % RXRINGLEN; + ring->rx_r[r][ring->c_rx[r]] = KSEG1ADDR(h) | 0x1 + | (ring->c_rx[r] == (priv->rxringlen - 1) ? WRAP : 0x1); + ring->c_rx[r] = (ring->c_rx[r] + 1) % priv->rxringlen; + last = (u32 *)KSEG1ADDR(sw_r32(priv->r->dma_if_rx_cur + r * 4)); } while (&ring->rx_r[r][ring->c_rx[r]] != last && work_done < budget); + // Update counters + priv->r->update_cntr(r, 0); + spin_unlock_irqrestore(&priv->lock, flags); return work_done; } static int rtl838x_poll_rx(struct napi_struct *napi, int budget) { - struct rtl838x_eth_priv *priv = container_of(napi, struct rtl838x_eth_priv, napi); - int work_done = 0, r = 0; - - while (work_done < budget && r < RXRINGS) { - work_done += rtl838x_hw_receive(priv->netdev, r, budget - work_done); - r++; + struct rtl838x_rx_q *rx_q = container_of(napi, struct rtl838x_rx_q, napi); + struct rtl838x_eth_priv *priv = rx_q->priv; + int work_done = 0; + int r = rx_q->id; + int work; + + while (work_done < budget) { + work = rtl838x_hw_receive(priv->netdev, r, budget - work_done); + if (!work) + break; + work_done += work; } if (work_done < budget) { napi_complete_done(napi, work_done); + /* Enable RX interrupt */ - sw_w32_mask(0, 0xfffff, priv->r->dma_if_intr_msk); + if (priv->family_id == RTL9300_FAMILY_ID || priv->family_id == RTL9310_FAMILY_ID) + sw_w32(0xffffffff, priv->r->dma_if_intr_rx_done_msk); + else + sw_w32_mask(0, 0xf00ff | BIT(r + 8), priv->r->dma_if_intr_msk); } return work_done; } @@ -960,9 +1406,9 @@ static void rtl838x_mac_an_restart(struct phylink_config *config) pr_info("In %s\n", __func__); /* Restart by disabling and re-enabling link */ - sw_w32(0x6192D, priv->r->mac_force_mode_ctrl(priv->cpu_port)); + sw_w32(0x6192D, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); mdelay(20); - sw_w32(0x6192F, priv->r->mac_force_mode_ctrl(priv->cpu_port)); + sw_w32(0x6192F, priv->r->mac_force_mode_ctrl + priv->cpu_port * 4); } static int rtl838x_mac_pcs_get_state(struct phylink_config *config, @@ -1114,94 +1560,65 @@ static int rtl838x_set_link_ksettings(struct net_device *ndev, return phylink_ethtool_ksettings_set(priv->phylink, cmd); } -int rtl839x_read_sds_phy(int phy_addr, int phy_reg) +static int rtl838x_mdio_read(struct mii_bus *bus, int mii_id, int regnum) { - int offset = 0; - int reg; u32 val; + int err; + struct rtl838x_eth_priv *priv = bus->priv; - if (phy_addr == 49) - offset = 0x100; - - /* For the RTL8393 internal SerDes, we simulate a PHY ID in registers 2/3 - * which would otherwise read as 0 - */ - if (soc_info.id == 0x8393) { - if (phy_reg == 2) - return 0x1c; - if (phy_reg == 3) - return 0x8393; - } - - reg = (phy_reg << 1) & 0xfc; - val = sw_r32(RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); - - if (phy_reg & 1) - val = (val >> 16) & 0xffff; - else - val &= 0xffff; + if (mii_id >= 24 && mii_id <= 27 && priv->id == 0x8380) + return rtl838x_read_sds_phy(mii_id, regnum); + err = rtl838x_read_phy(mii_id, 0, regnum, &val); + if (err) + return err; return val; } -int rtl838x_read_sds_phy(int phy_addr, int phy_reg) +static int rtl839x_mdio_read(struct mii_bus *bus, int mii_id, int regnum) { - int offset = 0; u32 val; + int err; + struct rtl838x_eth_priv *priv = bus->priv; - if (phy_addr == 26) - offset = 0x100; - val = sw_r32(MAPLE_SDS4_FIB_REG0r + offset + (phy_reg << 2)) & 0xffff; + if (mii_id >= 48 && mii_id <= 49 && priv->id == 0x8393) + return rtl839x_read_sds_phy(mii_id, regnum); + err = rtl839x_read_phy(mii_id, 0, regnum, &val); + if (err) + return err; return val; } -int rtl839x_write_sds_phy(int phy_addr, int phy_reg, u16 v) +static int rtl930x_mdio_read(struct mii_bus *bus, int mii_id, int regnum) { - int offset = 0; - int reg; u32 val; + int err; - if (phy_addr == 49) - offset = 0x100; + // TODO: These are hard-coded for the 2 Fibre Ports of the XGS1210 + if (mii_id >= 26 && mii_id <= 27) + return rtl930x_read_sds_phy(mii_id - 18, 0, regnum); - reg = (phy_reg << 1) & 0xfc; - val = v; - if (phy_reg & 1) { - val = val << 16; - sw_w32_mask(0xffff0000, val, - RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); + if (regnum & MII_ADDR_C45) { + regnum &= ~MII_ADDR_C45; + err = rtl930x_read_mmd_phy(mii_id, regnum >> 16, regnum & 0xffff, &val); } else { - sw_w32_mask(0xffff, val, - RTL839X_SDS12_13_XSG0 + offset + 0x80 + reg); + err = rtl930x_read_phy(mii_id, 0, regnum, &val); } - - return 0; -} - -static int rtl838x_mdio_read(struct mii_bus *bus, int mii_id, int regnum) -{ - u32 val; - int err; - struct rtl838x_eth_priv *priv = bus->priv; - - if (mii_id >= 24 && mii_id <= 27 && priv->id == 0x8380) - return rtl838x_read_sds_phy(mii_id, regnum); - err = rtl838x_read_phy(mii_id, 0, regnum, &val); if (err) return err; return val; } -static int rtl839x_mdio_read(struct mii_bus *bus, int mii_id, int regnum) +static int rtl931x_mdio_read(struct mii_bus *bus, int mii_id, int regnum) { u32 val; int err; - struct rtl838x_eth_priv *priv = bus->priv; +// struct rtl838x_eth_priv *priv = bus->priv; - if (mii_id >= 48 && mii_id <= 49 && priv->id == 0x8393) - return rtl839x_read_sds_phy(mii_id, regnum); +// if (mii_id >= 48 && mii_id <= 49 && priv->id == 0x8393) +// return rtl839x_read_sds_phy(mii_id, regnum); - err = rtl839x_read_phy(mii_id, 0, regnum, &val); + err = rtl931x_read_phy(mii_id, 0, regnum, &val); if (err) return err; return val; @@ -1216,7 +1633,7 @@ static int rtl838x_mdio_write(struct mii_bus *bus, int mii_id, if (mii_id >= 24 && mii_id <= 27 && priv->id == 0x8380) { if (mii_id == 26) offset = 0x100; - sw_w32(value, MAPLE_SDS4_FIB_REG0r + offset + (regnum << 2)); + sw_w32(value, RTL838X_SDS4_FIB_REG0 + offset + (regnum << 2)); return 0; } return rtl838x_write_phy(mii_id, 0, regnum, value); @@ -1233,6 +1650,32 @@ static int rtl839x_mdio_write(struct mii_bus *bus, int mii_id, return rtl839x_write_phy(mii_id, 0, regnum, value); } +static int rtl930x_mdio_write(struct mii_bus *bus, int mii_id, + int regnum, u16 value) +{ +// struct rtl838x_eth_priv *priv = bus->priv; + +// if (mii_id >= 48 && mii_id <= 49 && priv->id == 0x8393) +// return rtl839x_write_sds_phy(mii_id, regnum, value); + if (regnum & MII_ADDR_C45) { + regnum &= ~MII_ADDR_C45; + return rtl930x_write_mmd_phy(mii_id, regnum >> 16, regnum & 0xffff, value); + } + + return rtl930x_write_phy(mii_id, 0, regnum, value); +} + +static int rtl931x_mdio_write(struct mii_bus *bus, int mii_id, + int regnum, u16 value) +{ +// struct rtl838x_eth_priv *priv = bus->priv; + +// if (mii_id >= 48 && mii_id <= 49 && priv->id == 0x8393) +// return rtl839x_write_sds_phy(mii_id, regnum, value); + + return rtl931x_write_phy(mii_id, 0, regnum, value); +} + static int rtl838x_mdio_reset(struct mii_bus *bus) { pr_info("%s called\n", __func__); @@ -1262,6 +1705,62 @@ static int rtl839x_mdio_reset(struct mii_bus *bus) return 0; } +static int rtl931x_mdio_reset(struct mii_bus *bus) +{ + sw_w32(0x00000000, RTL931X_SMI_PORT_POLLING_CTRL); + sw_w32(0x00000000, RTL931X_SMI_PORT_POLLING_CTRL + 4); + + pr_info("%s called\n", __func__); + + return 0; +} + +static int rtl930x_mdio_reset(struct mii_bus *bus) +{ + int i; + int pos; + + pr_info("RTL930X_SMI_PORT0_15_POLLING_SEL %08x 16-27: %08x\n", + sw_r32(RTL930X_SMI_PORT0_15_POLLING_SEL), + sw_r32(RTL930X_SMI_PORT16_27_POLLING_SEL)); + + pr_info("%s: Enable SMI polling on SMI bus 0, SMI1, SMI2, disable on SMI3\n", __func__); + sw_w32_mask(BIT(20) | BIT(21) | BIT(22), BIT(23), RTL930X_SMI_GLB_CTRL); + + pr_info("RTL9300 Powering on SerDes ports\n"); + rtl9300_sds_power(24, 1); + rtl9300_sds_power(25, 1); + rtl9300_sds_power(26, 1); + rtl9300_sds_power(27, 1); + mdelay(200); + + // RTL930X_SMI_PORT0_15_POLLING_SEL 55550000 16-27: 00f9aaaa + // i.e SMI=0 for all ports + for (i = 0; i < 5; i++) + pr_info("port phy: %08x\n", sw_r32(RTL930X_SMI_PORT0_5_ADDR + i *4)); + + // 1-to-1 mapping of port to phy-address + for (i = 0; i < 24; i++) { + pos = (i % 6) * 5; + sw_w32_mask(0x1f << pos, i << pos, RTL930X_SMI_PORT0_5_ADDR + (i / 6) * 4); + } + + // ports 24 and 25 have PHY addresses 8 and 9, ports 26/27 PHY 26/27 + sw_w32(8 | 9 << 5 | 26 << 10 | 27 << 15, RTL930X_SMI_PORT0_5_ADDR + 4 * 4); + + // Ports 24 and 25 live on SMI bus 1 and 2 + sw_w32_mask(0x3 << 16, 0x1 << 16, RTL930X_SMI_PORT16_27_POLLING_SEL); + sw_w32_mask(0x3 << 18, 0x2 << 18, RTL930X_SMI_PORT16_27_POLLING_SEL); + + // SMI bus 1 and 2 speak Clause 45 TODO: Configure from .dts + sw_w32_mask(0, BIT(17) | BIT(18), RTL930X_SMI_GLB_CTRL); + + // Ports 24 and 25 are 2.5 Gig, set this type (1) + sw_w32_mask(0x7 << 12, 1 << 12, RTL930X_SMI_MAC_TYPE_CTRL); + sw_w32_mask(0x7 << 15, 1 << 15, RTL930X_SMI_MAC_TYPE_CTRL); + + return 0; +} static int rtl838x_mdio_init(struct rtl838x_eth_priv *priv) { @@ -1287,16 +1786,33 @@ static int rtl838x_mdio_init(struct rtl838x_eth_priv *priv) goto err_put_node; } - if (priv->family_id == RTL8380_FAMILY_ID) { + switch(priv->family_id) { + case RTL8380_FAMILY_ID: priv->mii_bus->name = "rtl838x-eth-mdio"; priv->mii_bus->read = rtl838x_mdio_read; priv->mii_bus->write = rtl838x_mdio_write; priv->mii_bus->reset = rtl838x_mdio_reset; - } else { + break; + case RTL8390_FAMILY_ID: priv->mii_bus->name = "rtl839x-eth-mdio"; priv->mii_bus->read = rtl839x_mdio_read; priv->mii_bus->write = rtl839x_mdio_write; priv->mii_bus->reset = rtl839x_mdio_reset; + break; + case RTL9300_FAMILY_ID: + priv->mii_bus->name = "rtl930x-eth-mdio"; + priv->mii_bus->read = rtl930x_mdio_read; + priv->mii_bus->write = rtl930x_mdio_write; + priv->mii_bus->reset = rtl930x_mdio_reset; + // priv->mii_bus->probe_capabilities = MDIOBUS_C22_C45; TODO for linux 5.9 + break; + case RTL9310_FAMILY_ID: + priv->mii_bus->name = "rtl931x-eth-mdio"; + priv->mii_bus->read = rtl931x_mdio_read; + priv->mii_bus->write = rtl931x_mdio_write; + priv->mii_bus->reset = rtl931x_mdio_reset; +// priv->mii_bus->probe_capabilities = MDIOBUS_C22_C45; TODO for linux 5.9 + break; } priv->mii_bus->priv = priv; priv->mii_bus->parent = &priv->pdev->dev; @@ -1325,12 +1841,46 @@ static const struct net_device_ops rtl838x_eth_netdev_ops = { .ndo_open = rtl838x_eth_open, .ndo_stop = rtl838x_eth_stop, .ndo_start_xmit = rtl838x_eth_tx, + .ndo_select_queue = rtl83xx_pick_tx_queue, .ndo_set_mac_address = rtl838x_set_mac_address, .ndo_validate_addr = eth_validate_addr, .ndo_set_rx_mode = rtl838x_eth_set_multicast_list, .ndo_tx_timeout = rtl838x_eth_tx_timeout, }; +static const struct net_device_ops rtl839x_eth_netdev_ops = { + .ndo_open = rtl838x_eth_open, + .ndo_stop = rtl838x_eth_stop, + .ndo_start_xmit = rtl838x_eth_tx, + .ndo_select_queue = rtl83xx_pick_tx_queue, + .ndo_set_mac_address = rtl838x_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_rx_mode = rtl839x_eth_set_multicast_list, + .ndo_tx_timeout = rtl838x_eth_tx_timeout, +}; + +static const struct net_device_ops rtl930x_eth_netdev_ops = { + .ndo_open = rtl838x_eth_open, + .ndo_stop = rtl838x_eth_stop, + .ndo_start_xmit = rtl838x_eth_tx, + .ndo_select_queue = rtl93xx_pick_tx_queue, + .ndo_set_mac_address = rtl838x_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_rx_mode = rtl930x_eth_set_multicast_list, + .ndo_tx_timeout = rtl838x_eth_tx_timeout, +}; + +static const struct net_device_ops rtl931x_eth_netdev_ops = { + .ndo_open = rtl838x_eth_open, + .ndo_stop = rtl838x_eth_stop, + .ndo_start_xmit = rtl838x_eth_tx, + .ndo_select_queue = rtl93xx_pick_tx_queue, + .ndo_set_mac_address = rtl838x_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_rx_mode = rtl931x_eth_set_multicast_list, + .ndo_tx_timeout = rtl838x_eth_tx_timeout, +}; + static const struct phylink_mac_ops rtl838x_phylink_ops = { .validate = rtl838x_validate, .mac_link_state = rtl838x_mac_pcs_get_state, @@ -1354,7 +1904,8 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev) const void *mac; phy_interface_t phy_mode; struct phylink *phylink; - int err = 0; + int err = 0, i, rxrings, rxringlen; + struct ring_b *ring; pr_info("Probing RTL838X eth device pdev: %x, dev: %x\n", (u32)pdev, (u32)(&(pdev->dev))); @@ -1364,7 +1915,13 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev) return -EINVAL; } - dev = alloc_etherdev(sizeof(struct rtl838x_eth_priv)); + rxrings = (soc_info.family == RTL8380_FAMILY_ID + || soc_info.family == RTL8390_FAMILY_ID) ? 8 : 32; + rxrings = rxrings > MAX_RXRINGS ? MAX_RXRINGS : rxrings; + rxringlen = MAX_ENTRIES / rxrings; + rxringlen = rxringlen > MAX_RXLEN ? MAX_RXLEN : rxringlen; + + dev = alloc_etherdev_mqs(sizeof(struct rtl838x_eth_priv), TXRINGS, rxrings); if (!dev) { err = -ENOMEM; goto err_free; @@ -1392,8 +1949,8 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev) } /* Allocate buffer memory */ - priv->membase = dmam_alloc_coherent(&pdev->dev, - sizeof(struct ring_b) + sizeof(struct notify_b), + priv->membase = dmam_alloc_coherent(&pdev->dev, rxrings * rxringlen * RING_BUFFER + + sizeof(struct ring_b) + sizeof(struct notify_b), (void *)&dev->mem_start, GFP_KERNEL); if (!priv->membase) { dev_err(&pdev->dev, "cannot allocate DMA buffer\n"); @@ -1401,6 +1958,10 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev) goto err_free; } + // Allocate ring-buffer space at the end of the allocated memory + ring = priv->membase; + ring->rx_space = priv->membase + sizeof(struct ring_b) + sizeof(struct notify_b); + spin_lock_init(&priv->lock); /* obtain device IRQ number */ @@ -1412,6 +1973,8 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev) dev->irq = res->start; } dev->ethtool_ops = &rtl838x_ethtool_ops; + dev->min_mtu = ETH_ZLEN; + dev->max_mtu = 1536; priv->id = soc_info.id; priv->family_id = soc_info.family; @@ -1423,15 +1986,33 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev) return -ENODEV; } - if (priv->family_id == 0x8390) { - priv->cpu_port = RTL839X_CPU_PORT; - priv->r = &rtl839x_reg; - priv->port_mask = 0x3f; - } else { + switch (priv->family_id) { + case RTL8380_FAMILY_ID: priv->cpu_port = RTL838X_CPU_PORT; priv->r = &rtl838x_reg; - priv->port_mask = 0x1f; + dev->netdev_ops = &rtl838x_eth_netdev_ops; + break; + case RTL8390_FAMILY_ID: + priv->cpu_port = RTL839X_CPU_PORT; + priv->r = &rtl839x_reg; + dev->netdev_ops = &rtl839x_eth_netdev_ops; + break; + case RTL9300_FAMILY_ID: + priv->cpu_port = RTL930X_CPU_PORT; + priv->r = &rtl930x_reg; + dev->netdev_ops = &rtl930x_eth_netdev_ops; + break; + case RTL9310_FAMILY_ID: + priv->cpu_port = RTL931X_CPU_PORT; + priv->r = &rtl931x_reg; + dev->netdev_ops = &rtl931x_eth_netdev_ops; + break; + default: + pr_err("Unknown SoC family\n"); + return -ENODEV; } + priv->rxringlen = rxringlen; + priv->rxrings = rxrings; rtl8380_init_mac(priv); @@ -1464,7 +2045,6 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev) pr_info("Using MAC %08x%08x\n", sw_r32(priv->r->mac), sw_r32(priv->r->mac + 4)); strcpy(dev->name, "eth%d"); - dev->netdev_ops = &rtl838x_eth_netdev_ops; priv->pdev = pdev; priv->netdev = dev; @@ -1476,7 +2056,12 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev) if (err) goto err_free; - netif_napi_add(dev, &priv->napi, rtl838x_poll_rx, 64); + for (i = 0; i < priv->rxrings; i++) { + priv->rx_qs[i].id = i; + priv->rx_qs[i].priv = priv; + netif_napi_add(dev, &priv->rx_qs[i].napi, rtl838x_poll_rx, 64); + } + platform_set_drvdata(pdev, dev); phy_mode = of_get_phy_mode(dn); @@ -1508,13 +2093,18 @@ static int rtl838x_eth_remove(struct platform_device *pdev) { struct net_device *dev = platform_get_drvdata(pdev); struct rtl838x_eth_priv *priv = netdev_priv(dev); + int i; if (dev) { pr_info("Removing platform driver for rtl838x-eth\n"); rtl838x_mdio_remove(priv); rtl838x_hw_stop(priv); - netif_stop_queue(dev); - netif_napi_del(&priv->napi); + + netif_tx_stop_all_queues(dev); + + for (i = 0; i < priv->rxrings; i++) + netif_napi_del(&priv->rx_qs[i].napi); + unregister_netdev(dev); free_netdev(dev); } |