diff options
Diffstat (limited to 'target/linux')
6 files changed, 588 insertions, 0 deletions
diff --git a/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds index 2b045d0945..bfc589e6c0 100644 --- a/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds +++ b/target/linux/mvebu/cortexa9/base-files/etc/board.d/01_leds @@ -15,6 +15,15 @@ ctera,c200-v2) ucidef_set_led_usbport "usb2" "USB2" "green:usb-2" "usb1-port1" "usb2-port1" ucidef_set_led_usbport "usb3" "USB3" "green:usb-1" "usb1-port2" "usb2-port2" ;; +fortinet,fg-50e) + ucidef_set_led_netdev "wan1_link" "WAN1 Link" "green:speed_wan1" "eth1" "link" + ucidef_set_led_netdev "wan2_link" "WAN2 Link" "green:speed_wan2" "eth2" "link" + ucidef_set_led_netdev "lan1_link" "LAN1 Link" "green:speed_lan1" "lan1" "link" + ucidef_set_led_netdev "lan2_link" "LAN2 Link" "green:speed_lan2" "lan2" "link" + ucidef_set_led_netdev "lan3_link" "LAN3 Link" "green:speed_lan3" "lan3" "link" + ucidef_set_led_netdev "lan4_link" "LAN4 Link" "green:speed_lan4" "lan4" "link" + ucidef_set_led_netdev "lan5_link" "LAN5 Link" "green:speed_lan5" "lan5" "link" + ;; kobol,helios4) ucidef_set_led_usbport "USB" "USB" "helios4:green:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1" "usb5-port1" ;; diff --git a/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network b/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network index d2229fe6bf..9db29d52df 100644 --- a/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/cortexa9/base-files/etc/board.d/02_network @@ -18,6 +18,9 @@ mvebu_setup_interfaces() cznic,turris-omnia) ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3 lan4" "eth2" ;; + fortinet,fg-50e) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" "eth1 eth2" + ;; iptime,nas1dual) ucidef_set_interface_lan "eth0 eth1" "dhcp" ;; diff --git a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/fortinet.sh b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/fortinet.sh new file mode 100644 index 0000000000..a2742aa374 --- /dev/null +++ b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/fortinet.sh @@ -0,0 +1,54 @@ +. /lib/functions.sh + +fortinet_fwinfo_blocks() { + local fwinfo_mtd="$(find_mtd_part firmware-info)" + local offset="$1" + local len="$2" + local blks + + if [ -z "$fwinfo_mtd" ]; then + echo "WARN: MTD device \"firmware-info\" not found" + return 1 + fi + + blks=$((len / 0x200)) + [ $((len % 0x200)) -gt 0 ] && blks=$((blks + 1)) + blks=$(printf "%04x" $blks) + printf "fwinfo: offset-> 0x%x, blocks-> 0x%s (len: 0x%08x)\n" \ + $offset $blks $len + + printf "\x${blks:2:2}\x${blks:0:2}" | \ + dd bs=2 count=1 seek=$((offset / 2)) conv=notrunc of=${fwinfo_mtd} +} + +fortinet_do_upgrade() { + local board_dir="$(tar tf "$1" | grep -m 1 '^sysupgrade-.*/$')" + local kern_mtd="$(find_mtd_part kernel)" + local root_mtd="$(find_mtd_part rootfs)" + local kern_len root_len + + board_dir="${board_dir%/}" + + if [ -z "$kern_mtd" ] || [ -z "$root_mtd" ]; then + echo "ERROR: MTD device \"kernel\" or \"rootfs\" not found" + umount -a + reboot -f + fi + + kern_len=$( (tar xOf "$1" "$board_dir/kernel" | wc -c) 2> /dev/null) + root_len=$( (tar xOf "$1" "$board_dir/root" | wc -c) 2> /dev/null) + + if [ -z "$kern_len" ] || [ -z "$root_len" ]; then + echo "ERROR: failed to get length of new kernel or rootfs" + umount -a + reboot -f + fi + + fortinet_fwinfo_blocks "0x184" "$kern_len" + fortinet_fwinfo_blocks "0x18c" "$root_len" + + tar xOf "$1" "$board_dir/kernel" | \ + mtd write - "kernel" + tar xOf "$1" "$board_dir/root" | \ + mtd ${UPGRADE_BACKUP:+-j "${UPGRADE_BACKUP}"} write - "rootfs" +} diff --git a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh index 9019c1aeff..fbbb68e05e 100755 --- a/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh +++ b/target/linux/mvebu/cortexa9/base-files/lib/upgrade/platform.sh @@ -52,6 +52,9 @@ platform_do_upgrade() { solidrun,clearfog-pro-a1) legacy_sdcard_do_upgrade "$1" ;; + fortinet,fg-50e) + fortinet_do_upgrade "$1" + ;; linksys,wrt1200ac|\ linksys,wrt1900ac-v1|\ linksys,wrt1900ac-v2|\ diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts new file mode 100644 index 0000000000..506e01f0ff --- /dev/null +++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-385-fortinet-fg-50e.dts @@ -0,0 +1,491 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include "armada-385.dtsi" + +/ { + model = "Fortinet FortiGate 50E"; + compatible = "fortinet,fg-50e", "marvell,armada385", "marvell,armada380"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_green; + label-mac-device = ð0; + }; + + chosen { + stdout-path = "serial0:9600n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000 + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_gpio_keys_pins>; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_gpio_leds_pins>; + + led-0 { + label = "red:alarm"; + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_ALARM; + }; + + led-1 { + label = "red:ha"; + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_RED>; + }; + + led_status_green: led-2 { + label = "green:sta"; + gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + function = LED_FUNCTION_STATUS; + }; + + led-3 { + label = "green:ha"; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-4 { + label = "amber:alarm"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_AMBER>; + function = LED_FUNCTION_ALARM; + }; + + led_status_red: led-5 { + label = "red:sta"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_RED>; + function = LED_FUNCTION_STATUS; + }; + + led-6 { + label = "green:speed_wan1"; + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-7 { + label = "green:speed_wan2"; + gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-8 { + label = "amber:speed_lan5"; + gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_AMBER>; + }; + + led-9 { + label = "green:speed_lan5"; + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-10 { + label = "green:speed_lan4"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-11 { + label = "amber:speed_lan4"; + gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_AMBER>; + }; + + led-12 { + label = "amber:speed_lan3"; + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_AMBER>; + }; + + led-13 { + label = "green:speed_lan3"; + gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-14 { + label = "green:speed_lan1"; + gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-15 { + label = "amber:speed_lan1"; + gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_AMBER>; + }; + + led-16 { + label = "green:speed_lan2"; + gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + }; + + led-17 { + label = "amber:speed_lan2"; + gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_AMBER>; + }; + }; + + reg_usb_vbus: regulator-usb-vbus { + compatible = "fixed-regulator"; + regulator-name = "usb-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 21 GPIO_ACTIVE_LOW>; + regulator-always-on; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + gpio2: gpio@24 { + compatible = "nxp,pca9555"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <0x2>; + }; + + hwmon@28 { + compatible = "nuvoton,nct7802"; + reg = <0x28>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&pinctrl { + pmx_phy_switch_pins: phy-switch-pins { + marvell,pins = "mpp19", "mpp20", "mpp23", "mpp34", "mpp41"; + marvell,function = "gpio"; + }; + + pmx_gpio_leds_pins: gpio-leds-pins { + marvell,pins = "mpp30", "mpp32", "mpp33", "mpp35", + "mpp45", "mpp47"; + marvell,function = "gpio"; + }; + + pmx_usb_pins: usb-pins { + marvell,pins = "mpp53"; + marvell,function = "gpio"; + }; + + pmx_gpio_keys_pins: gpio-keys-pins { + marvell,pins = "mpp54"; + marvell,function = "gpio"; + }; +}; + +&bm { + status = "okay"; +}; + +&bm_bppi { + status = "okay"; +}; + +ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&ge0_rgmii_pins>; + status = "okay"; + + phy-connection-type = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <1>; + nvmem-cells = <&macaddr_bdinfo_d880>; + nvmem-cell-names = "mac-address"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +ð1 { + status = "okay"; + + phy-handle = <ðphy0>; + phy-connection-type = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + nvmem-cells = <&macaddr_bdinfo_d880>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; +}; + +ð2 { + status = "okay"; + + phy-handle = <ðphy1>; + phy-connection-type = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <3>; + nvmem-cells = <&macaddr_bdinfo_d880>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <2>; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>, <&pmx_phy_switch_pins>; + + /* Marvell 88E1512 */ + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-id0141,0dd1", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; + /* + * LINK/ACT (Green): LED[0], Active Low + * SPEED 100M (Amber): LED[1], Active High + */ + marvell,reg-init = <3 16 0 0x71>, + <3 17 0 0x4>; + }; + + /* Marvell 88E1512 */ + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-id0141,0dd1", + "ethernet-phy-ieee802.3-c22"; + reg = <1>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + /* + * LINK/ACT (Green): LED[0], Active Low + * SPEED 100M (Amber): LED[1], Active High + */ + marvell,reg-init = <3 16 0 0x71>, + <3 17 0 0x4>; + }; + + /* Marvell 88E6176 */ + switch@2 { + compatible = "marvell,mv88e6085"; + reg = <0x2>; + reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan5"; + nvmem-cells = <&macaddr_bdinfo_d880>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <7>; + }; + + port@1 { + reg = <1>; + label = "lan4"; + nvmem-cells = <&macaddr_bdinfo_d880>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <6>; + }; + + port@2 { + reg = <2>; + label = "lan3"; + nvmem-cells = <&macaddr_bdinfo_d880>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <5>; + }; + + port@3 { + reg = <3>; + label = "lan2"; + nvmem-cells = <&macaddr_bdinfo_d880>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <4>; + }; + + port@4 { + reg = <4>; + label = "lan1"; + nvmem-cells = <&macaddr_bdinfo_d880>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <3>; + }; + + port@6 { + reg = <6>; + ethernet = <ð0>; + phy-connection-type = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; +}; + +&usb3_0 { + pinctrl-names = "default"; + pinctrl-0 = <&pmx_usb_pins>; + status = "okay"; + + vbus-supply = <®_usb_vbus>; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x1c0000>; + label = "u-boot"; + read-only; + }; + + partition@1c0000 { + reg = <0x1c0000 0x10000>; + label = "firmware-info"; + + /* + * 0x10 - 0x2f : image name (image1) + * 0x30 - 0x4f : image name (image2) + * 0x170 (1byte): active image (0x0/0x1) + * 0x184 - 0x185: kernel block count (image1) + * 0x18c - 0x18d: rootfs block count (image1) + * 0x194 - 0x195: kernel block count (image2) + * 0x19c - 0x19d: rootfs block count (image2) + * 0x1be (1byte): bit7 -> active flag (image1)? + * 0x1ce (1byte): bit7 -> active flag (image2)? + * + * Note: block size --> 0x200 (512 bytes) + */ + }; + + partition@1d0000 { + reg = <0x1d0000 0x10000>; + label = "dtb"; + read-only; + }; + + partition@1e0000 { + reg = <0x1e0000 0x10000>; + label = "u-boot-env"; + read-only; + }; + + partition@1f0000 { + reg = <0x1f0000 0x10000>; + label = "board-info"; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_bdinfo_d880: macaddr@d880 { + reg = <0xd880 0x6>; + }; + }; + + partition@200000 { + reg = <0x200000 0x600000>; + label = "kernel"; + }; + + partition@800000 { + reg = <0x800000 0x1800000>; + label = "rootfs"; + }; + + partition@2000000 { + reg = <0x2000000 0x600000>; + label = "kn2"; + read-only; + }; + + partition@2600000 { + reg = <0x2600000 0x1800000>; + label = "rfs2"; + read-only; + }; + + partition@3e00000 { + reg = <0x3e00000 0x1200000>; + label = "part1"; + read-only; + }; + + partition@5000000 { + reg = <0x5000000 0x1200000>; + label = "part2"; + read-only; + }; + + partition@6200000 { + reg = <0x6200000 0x1e00000>; + label = "config"; + read-only; + }; + }; + }; +}; diff --git a/target/linux/mvebu/image/cortexa9.mk b/target/linux/mvebu/image/cortexa9.mk index 56381ab5f8..248f1cd6fd 100644 --- a/target/linux/mvebu/image/cortexa9.mk +++ b/target/linux/mvebu/image/cortexa9.mk @@ -3,6 +3,19 @@ # Copyright (C) 2012-2016 OpenWrt.org # Copyright (C) 2016 LEDE-project.org +define Build/fortigate-header + ( \ + dd if=/dev/zero bs=384 count=1 2>/dev/null; \ + datalen=$$(wc -c $@ | cut -d' ' -f1); \ + datalen=$$(printf "%08x" $$datalen); \ + datalen="$${datalen:6:2}$${datalen:4:2}$${datalen:2:2}$${datalen:0:2}"; \ + printf $$(echo "00020000$${datalen}ffff0000ffff0000" | sed 's/../\\x&/g'); \ + dd if=/dev/zero bs=112 count=1 2>/dev/null; \ + cat $@; \ + ) > $@.new + mv $@.new $@ +endef + define Device/dsa-migration DEVICE_COMPAT_VERSION := 1.1 DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA @@ -84,6 +97,21 @@ define Device/cznic_turris-omnia endef TARGET_DEVICES += cznic_turris-omnia +define Device/fortinet_fg-50e + DEVICE_VENDOR := Fortinet + DEVICE_MODEL := FortiGate 50E + SOC := armada-385 + KERNEL := kernel-bin | append-dtb + KERNEL_INITRAMFS := kernel-bin | append-dtb | fortigate-header | \ + gzip-filename FGT50E + KERNEL_SIZE := 6144k + DEVICE_DTS := armada-385-fortinet-fg-50e + IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | \ + sysupgrade-tar rootfs=$$$$@ | append-metadata + DEVICE_PACKAGES := kmod-hwmon-nct7802 +endef +TARGET_DEVICES += fortinet_fg-50e + define Device/globalscale_mirabox $(Device/NAND-512K) DEVICE_VENDOR := Globalscale |