diff options
Diffstat (limited to 'target/linux')
3 files changed, 194 insertions, 42 deletions
diff --git a/target/linux/bcm53xx/patches-4.4/044-0008-ARM-BCM5301X-Add-DT-for-TP-LINK-Archer-C9-V1.patch b/target/linux/bcm53xx/patches-4.4/044-0008-ARM-BCM5301X-Add-DT-for-TP-LINK-Archer-C9-V1.patch new file mode 100644 index 0000000000..5b2aa2622a --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/044-0008-ARM-BCM5301X-Add-DT-for-TP-LINK-Archer-C9-V1.patch @@ -0,0 +1,146 @@ +From 41182beb217c47cfbaaf26a60f22a8b3943faa61 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> +Date: Sun, 13 Nov 2016 11:12:09 +0100 +Subject: [PATCH] ARM: BCM5301X: Add DT for TP-LINK Archer C9 V1 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +It's BCM4709A0 based device with 16 MiB flash, 128 MiB of RAM and two +PCIe based on-PCB BCM4360 chipsets. + +Signed-off-by: Rafał Miłecki <rafal@milecki.pl> +Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 114 ++++++++++++++++++++++ + 2 files changed, 115 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4709-buffalo-wxr-1900dhp.dtb \ + bcm4709-netgear-r7000.dtb \ + bcm4709-netgear-r8000.dtb \ ++ bcm4709-tplink-archer-c9-v1.dtb \ + bcm47094-dlink-dir-885l.dtb \ + bcm47094-luxul-xwr-3100.dtb \ + bcm47094-netgear-r8500.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +@@ -0,0 +1,114 @@ ++/* ++ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> ++ * ++ * Licensed under the ISC license. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm4709.dtsi" ++ ++/ { ++ compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708"; ++ model = "TP-LINK Archer C9 V1"; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200 earlycon"; ++ }; ++ ++ memory { ++ reg = <0x00000000 0x08000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ lan { ++ label = "bcm53xx:blue:lan"; ++ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "default-off"; ++ }; ++ ++ wps { ++ label = "bcm53xx:blue:wps"; ++ gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "default-off"; ++ }; ++ ++ 2ghz { ++ label = "bcm53xx:blue:2ghz"; ++ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "default-off"; ++ }; ++ ++ 5ghz { ++ label = "bcm53xx:blue:5ghz"; ++ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "default-off"; ++ }; ++ ++ usb3 { ++ label = "bcm53xx:blue:usb3"; ++ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "default-off"; ++ }; ++ ++ usb2 { ++ label = "bcm53xx:blue:usb2"; ++ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "default-off"; ++ }; ++ ++ wan-blue { ++ label = "bcm53xx:blue:wan"; ++ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "default-off"; ++ }; ++ ++ wan-amber { ++ label = "bcm53xx:amber:wan"; ++ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "default-off"; ++ }; ++ ++ power { ++ label = "bcm53xx:blue:power"; ++ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; ++ linux,default-trigger = "default-on"; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ wps { ++ label = "WPS"; ++ linux,code = <KEY_WPS_BUTTON>; ++ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; ++ }; ++ ++ restart { ++ label = "Reset"; ++ linux,code = <KEY_RESTART>; ++ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&usb2 { ++ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; ++}; ++ ++&usb3 { ++ vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>; ++}; ++ ++&spi_nor { ++ status = "okay"; ++}; diff --git a/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-add-device-specific-workarounds.patch b/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-add-device-specific-workarounds.patch new file mode 100644 index 0000000000..06cb5104d5 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-add-device-specific-workarounds.patch @@ -0,0 +1,48 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> +Subject: [PATCH] mtd: bcm47xxpart: add device specific workarounds +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Rafał Miłecki <rafal@milecki.pl> +--- + +--- a/drivers/mtd/bcm47xxpart.c ++++ b/drivers/mtd/bcm47xxpart.c +@@ -14,6 +14,7 @@ + #include <linux/slab.h> + #include <linux/mtd/mtd.h> + #include <linux/mtd/partitions.h> ++#include <linux/of.h> + + #include <uapi/linux/magic.h> + +@@ -159,6 +160,28 @@ static int bcm47xxpart_parse(struct mtd_info *master, + break; + } + ++ /* ++ * Device specific workarounds (hacks). We should use DT to ++ * define partitions but we need a working TRX firmware splitter ++ * first. ++ */ ++ if (of_machine_is_compatible("asus,rt-ac87u") && offset == 0x7ec0000) { ++ /* ++ * "asus" partition uses JFFS2 which we don't detect and ++ * we don't want to as this could affect other devices. ++ */ ++ bcm47xxpart_add_part(&parts[curr_part++], "asus", offset, MTD_WRITEABLE); ++ continue; ++ } else if (of_machine_is_compatible("tplink,archer-c9-v1") && offset == 0xe40000) { ++ /* ++ * There is a whole set of partitions (not even listed ++ * by original firmware): "default-mac", "pin", ++ * "partition-table", etc. ++ */ ++ bcm47xxpart_add_part(&parts[curr_part++], "tplink", offset, MTD_WRITEABLE); ++ continue; ++ } ++ + /* Read beginning of the block */ + err = mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ, + &bytes_read, (uint8_t *)buf); diff --git a/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch b/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch deleted file mode 100644 index d9537d594b..0000000000 --- a/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 21500872c1dba33848ddcf6bea97d58772675d36 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com> -Date: Sun, 17 May 2015 14:00:52 +0200 -Subject: [PATCH] mtd: bcm47xxpart: workaround for Asus RT-AC87U "asus" - partition -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: Rafał Miłecki <zajec5@gmail.com> ---- - drivers/mtd/bcm47xxpart.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/drivers/mtd/bcm47xxpart.c -+++ b/drivers/mtd/bcm47xxpart.c -@@ -14,6 +14,7 @@ - #include <linux/slab.h> - #include <linux/mtd/mtd.h> - #include <linux/mtd/partitions.h> -+#include <linux/of.h> - - #include <uapi/linux/magic.h> - -@@ -159,6 +160,17 @@ static int bcm47xxpart_parse(struct mtd_ - break; - } - -+ /* -+ * Ugly workaround for Asus RT-AC87U and its "asus" partition. -+ * It uses JFFS2 which we don't (want to) detect. We should -+ * probably use DT to define partitions but we need a working -+ * TRX firmware splitter first. -+ */ -+ if (of_machine_is_compatible("asus,rt-ac87u") && offset == 0x7ec0000) { -+ bcm47xxpart_add_part(&parts[curr_part++], "asus", offset, MTD_WRITEABLE); -+ continue; -+ } -+ - /* Read beginning of the block */ - err = mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ, - &bytes_read, (uint8_t *)buf); |