diff options
Diffstat (limited to 'target/linux')
43 files changed, 62 insertions, 483 deletions
diff --git a/target/linux/apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch b/target/linux/apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch index 3b17a27e79..1d7fe48489 100644 --- a/target/linux/apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch +++ b/target/linux/apm821xx/patches-5.10/802-usb-xhci-force-msi-renesas-xhci.patch @@ -13,7 +13,7 @@ produce a noisy warning. --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c -@@ -267,6 +267,7 @@ static void xhci_pci_quirks(struct devic +@@ -274,6 +274,7 @@ static void xhci_pci_quirks(struct devic pdev->device == 0x0015) { xhci->quirks |= XHCI_RESET_ON_RESUME; xhci->quirks |= XHCI_ZERO_64B_REGS; diff --git a/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch b/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch index 1ade1e9181..161ed445bd 100644 --- a/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch +++ b/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch @@ -754,7 +754,7 @@ ptr = ip6hoff + sizeof(struct ipv6hdr); --- a/include/net/neighbour.h +++ b/include/net/neighbour.h -@@ -274,8 +274,10 @@ static inline bool neigh_key_eq128(const +@@ -275,8 +275,10 @@ static inline bool neigh_key_eq128(const const u32 *n32 = (const u32 *)n->primary_key; const u32 *p32 = pkey; diff --git a/target/linux/ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch b/target/linux/ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch deleted file mode 100644 index 9785fbfe54..0000000000 --- a/target/linux/ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 4d3c17975c7814884a721fe693b3adf5c426d759 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Tue, 10 Nov 2015 22:18:39 +0100 -Subject: [RFC] serial: core: add support for boot console with arbitrary - baud rates - -The Arduino Yun uses a baud rate of 250000 by default. The serial is -going over the Atmel ATmega and is used to connect to this chip. -Without this patch Linux wants to switch the console to 9600 Baud. - -With this patch Linux will use the configured baud rate and not a -default one specified in uart_register_driver(). - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> -[rebased to 4.14, slightly reworded commit message] -Signed-off-by: Sungbo Eo <mans0n@gorani.run> ---- - drivers/tty/serial/serial_core.c | 6 +++++- - include/linux/console.h | 1 + - 2 files changed, 6 insertions(+), 1 deletions(-) - ---- a/drivers/tty/serial/serial_core.c -+++ b/drivers/tty/serial/serial_core.c -@@ -222,6 +222,8 @@ static int uart_port_startup(struct tty_ - if (retval == 0) { - if (uart_console(uport) && uport->cons->cflag) { - tty->termios.c_cflag = uport->cons->cflag; -+ tty->termios.c_ospeed = uport->cons->baud; -+ tty->termios.c_ispeed = uport->cons->baud; - uport->cons->cflag = 0; - } - /* -@@ -2123,8 +2125,10 @@ uart_set_options(struct uart_port *port, - * Allow the setting of the UART parameters with a NULL console - * too: - */ -- if (co) -+ if (co) { - co->cflag = termios.c_cflag; -+ co->baud = baud; -+ } - - return 0; - } ---- a/include/linux/console.h -+++ b/include/linux/console.h -@@ -150,6 +150,7 @@ struct console { - short flags; - short index; - int cflag; -+ int baud; - void *data; - struct console *next; - }; diff --git a/target/linux/bcm27xx/patches-5.10/950-0198-media-videodev2.h-Add-a-format-for-column-YUV4-2-0-m.patch b/target/linux/bcm27xx/patches-5.10/950-0198-media-videodev2.h-Add-a-format-for-column-YUV4-2-0-m.patch index abeddf9c76..d0bb71b621 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0198-media-videodev2.h-Add-a-format-for-column-YUV4-2-0-m.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0198-media-videodev2.h-Add-a-format-for-column-YUV4-2-0-m.patch @@ -278,7 +278,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> pixfmt-nv24 --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c -@@ -1325,6 +1325,8 @@ static void v4l_fill_fmtdesc(struct v4l2 +@@ -1343,6 +1343,8 @@ static void v4l_fill_fmtdesc(struct v4l2 case V4L2_PIX_FMT_NV61M: descr = "Y/CrCb 4:2:2 (N-C)"; break; case V4L2_PIX_FMT_NV12MT: descr = "Y/CbCr 4:2:0 (64x32 MB, N-C)"; break; case V4L2_PIX_FMT_NV12MT_16X16: descr = "Y/CbCr 4:2:0 (16x16 MB, N-C)"; break; diff --git a/target/linux/bcm27xx/patches-5.10/950-0210-media-uapi-v4l2-core-Add-sensor-ancillary-data-V4L2-.patch b/target/linux/bcm27xx/patches-5.10/950-0210-media-uapi-v4l2-core-Add-sensor-ancillary-data-V4L2-.patch index a89ce1a8d6..5f2fbe7cb6 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0210-media-uapi-v4l2-core-Add-sensor-ancillary-data-V4L2-.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0210-media-uapi-v4l2-core-Add-sensor-ancillary-data-V4L2-.patch @@ -65,7 +65,7 @@ Signed-off-by: Naushir Patuck <naush@raspberrypi.com> + --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c -@@ -1404,6 +1404,7 @@ static void v4l_fill_fmtdesc(struct v4l2 +@@ -1422,6 +1422,7 @@ static void v4l_fill_fmtdesc(struct v4l2 case V4L2_META_FMT_UVC: descr = "UVC Payload Header Metadata"; break; case V4L2_META_FMT_D4XX: descr = "Intel D4xx UVC Metadata"; break; case V4L2_META_FMT_VIVID: descr = "Vivid Metadata"; break; diff --git a/target/linux/bcm27xx/patches-5.10/950-0219-media-uapi-v4l2-core-Add-ISP-statistics-output-V4L2-.patch b/target/linux/bcm27xx/patches-5.10/950-0219-media-uapi-v4l2-core-Add-ISP-statistics-output-V4L2-.patch index a2974a98b4..43f3c2c576 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0219-media-uapi-v4l2-core-Add-ISP-statistics-output-V4L2-.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0219-media-uapi-v4l2-core-Add-ISP-statistics-output-V4L2-.patch @@ -74,7 +74,7 @@ Signed-off-by: Naushir Patuck <naush@raspberrypi.com> + --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c -@@ -1405,6 +1405,7 @@ static void v4l_fill_fmtdesc(struct v4l2 +@@ -1423,6 +1423,7 @@ static void v4l_fill_fmtdesc(struct v4l2 case V4L2_META_FMT_D4XX: descr = "Intel D4xx UVC Metadata"; break; case V4L2_META_FMT_VIVID: descr = "Vivid Metadata"; break; case V4L2_META_FMT_SENSOR_DATA: descr = "Sensor Ancillary Metadata"; break; diff --git a/target/linux/bcm27xx/patches-5.10/950-0278-media-Add-a-pixel-format-for-MIPI-packed-12bit-luma-.patch b/target/linux/bcm27xx/patches-5.10/950-0278-media-Add-a-pixel-format-for-MIPI-packed-12bit-luma-.patch index fb27792ca3..576e20a58f 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0278-media-Add-a-pixel-format-for-MIPI-packed-12bit-luma-.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0278-media-Add-a-pixel-format-for-MIPI-packed-12bit-luma-.patch @@ -75,7 +75,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> pixfmt-y10p --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c -@@ -1283,6 +1283,7 @@ static void v4l_fill_fmtdesc(struct v4l2 +@@ -1301,6 +1301,7 @@ static void v4l_fill_fmtdesc(struct v4l2 case V4L2_PIX_FMT_Y16_BE: descr = "16-bit Greyscale BE"; break; case V4L2_PIX_FMT_Y10BPACK: descr = "10-bit Greyscale (Packed)"; break; case V4L2_PIX_FMT_Y10P: descr = "10-bit Greyscale (MIPI Packed)"; break; diff --git a/target/linux/bcm27xx/patches-5.10/950-0279-media-Add-a-pixel-format-for-MIPI-packed-14bit-luma-.patch b/target/linux/bcm27xx/patches-5.10/950-0279-media-Add-a-pixel-format-for-MIPI-packed-14bit-luma-.patch index e6b27905cb..210c128f43 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0279-media-Add-a-pixel-format-for-MIPI-packed-14bit-luma-.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0279-media-Add-a-pixel-format-for-MIPI-packed-14bit-luma-.patch @@ -84,7 +84,7 @@ Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> pixfmt-y16 --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c -@@ -1284,6 +1284,7 @@ static void v4l_fill_fmtdesc(struct v4l2 +@@ -1302,6 +1302,7 @@ static void v4l_fill_fmtdesc(struct v4l2 case V4L2_PIX_FMT_Y10BPACK: descr = "10-bit Greyscale (Packed)"; break; case V4L2_PIX_FMT_Y10P: descr = "10-bit Greyscale (MIPI Packed)"; break; case V4L2_PIX_FMT_Y12P: descr = "12-bit Greyscale (MIPI Packed)"; break; diff --git a/target/linux/bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch b/target/linux/bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch index 825b5969df..5f451a01d4 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch @@ -22,7 +22,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com> --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c -@@ -279,6 +279,7 @@ static void xhci_pci_quirks(struct devic +@@ -286,6 +286,7 @@ static void xhci_pci_quirks(struct devic if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) { xhci->quirks |= XHCI_LPM_SUPPORT; xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS; diff --git a/target/linux/bcm27xx/patches-5.10/950-0639-cgroup-Disable-cgroup-memory-by-default.patch b/target/linux/bcm27xx/patches-5.10/950-0639-cgroup-Disable-cgroup-memory-by-default.patch index bf7c09482c..aa3aeeaa42 100644 --- a/target/linux/bcm27xx/patches-5.10/950-0639-cgroup-Disable-cgroup-memory-by-default.patch +++ b/target/linux/bcm27xx/patches-5.10/950-0639-cgroup-Disable-cgroup-memory-by-default.patch @@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c -@@ -5667,6 +5667,9 @@ int __init cgroup_init_early(void) +@@ -5690,6 +5690,9 @@ int __init cgroup_init_early(void) return 0; } @@ -27,7 +27,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> /** * cgroup_init - cgroup initialization * -@@ -5705,6 +5708,12 @@ int __init cgroup_init(void) +@@ -5728,6 +5731,12 @@ int __init cgroup_init(void) mutex_unlock(&cgroup_mutex); @@ -40,7 +40,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> for_each_subsys(ss, ssid) { if (ss->early_init) { struct cgroup_subsys_state *css = -@@ -6242,6 +6251,10 @@ static int __init cgroup_disable(char *s +@@ -6265,6 +6274,10 @@ static int __init cgroup_disable(char *s strcmp(token, ss->legacy_name)) continue; @@ -51,7 +51,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> static_branch_disable(cgroup_subsys_enabled_key[i]); pr_info("Disabling %s control group subsystem\n", ss->name); -@@ -6251,6 +6264,31 @@ static int __init cgroup_disable(char *s +@@ -6274,6 +6287,31 @@ static int __init cgroup_disable(char *s } __setup("cgroup_disable=", cgroup_disable); diff --git a/target/linux/bcm53xx/patches-5.10/033-v5.15-0012-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch b/target/linux/bcm53xx/patches-5.10/033-v5.15-0012-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch deleted file mode 100644 index fda22404a5..0000000000 --- a/target/linux/bcm53xx/patches-5.10/033-v5.15-0012-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch +++ /dev/null @@ -1,158 +0,0 @@ -From def3d0357e0539e6f6b82f079ff156def6ec2107 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl> -Date: Thu, 19 Aug 2021 08:57:02 +0200 -Subject: [PATCH] ARM: dts: BCM5301X: Fix memory nodes names -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Thix fixes: -arch/arm/boot/dts/bcm4708-netgear-r6250.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} -arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} -arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]} -arch/arm/boot/dts/bcm4709-linksys-ea9200.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} -arch/arm/boot/dts/bcm4709-netgear-r7000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} -arch/arm/boot/dts/bcm4709-netgear-r8000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 134217728]]} -arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} -arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728], [2281701376, 402653184]]} -arch/arm/boot/dts/bcm53016-meraki-mr32.dt.yaml: /: memory: False schema does not allow {'reg': [[0, 134217728]], 'device_type': ['memory']} -arch/arm/boot/dts/bcm94708.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} -arch/arm/boot/dts/bcm94709.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 134217728]]} - -Signed-off-by: Rafał Miłecki <rafal@milecki.pl> -Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> ---- - arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +- - arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 +- - arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 +- - arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 2 +- - arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 2 +- - arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 2 +- - arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 2 +- - arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 2 +- - arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +- - arch/arm/boot/dts/bcm94708.dts | 2 +- - arch/arm/boot/dts/bcm94709.dts | 2 +- - 11 files changed, 11 insertions(+), 11 deletions(-) - ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -20,7 +20,7 @@ - bootargs = "console=ttyS0,115200 earlycon"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x08000000>; ---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts -@@ -19,7 +19,7 @@ - bootargs = "console=ttyS0,115200"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x08000000>; ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -19,7 +19,7 @@ - bootargs = "console=ttyS0,115200"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x18000000>; ---- a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts -@@ -16,7 +16,7 @@ - bootargs = "console=ttyS0,115200"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x08000000>; ---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts -@@ -19,7 +19,7 @@ - bootargs = "console=ttyS0,115200"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x08000000>; ---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts -@@ -30,7 +30,7 @@ - bootargs = "console=ttyS0,115200"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x08000000>; ---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts -@@ -15,7 +15,7 @@ - bootargs = "console=ttyS0,115200 earlycon"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>; - }; ---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts -@@ -16,7 +16,7 @@ - bootargs = "earlycon"; - }; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>, - <0x88000000 0x18000000>; ---- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts -@@ -20,7 +20,7 @@ - bootargs = " console=ttyS0,115200n8 earlycon"; - }; - -- memory { -+ memory@0 { - reg = <0x00000000 0x08000000>; - device_type = "memory"; - }; ---- a/arch/arm/boot/dts/bcm94708.dts -+++ b/arch/arm/boot/dts/bcm94708.dts -@@ -38,7 +38,7 @@ - model = "NorthStar SVK (BCM94708)"; - compatible = "brcm,bcm94708", "brcm,bcm4708"; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>; - }; ---- a/arch/arm/boot/dts/bcm94709.dts -+++ b/arch/arm/boot/dts/bcm94709.dts -@@ -38,7 +38,7 @@ - model = "NorthStar SVK (BCM94709)"; - compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708"; - -- memory { -+ memory@0 { - device_type = "memory"; - reg = <0x00000000 0x08000000>; - }; diff --git a/target/linux/generic/backport-5.10/103-v5.13-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch b/target/linux/generic/backport-5.10/103-v5.13-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch index 7e34bae8b4..83c99d32e7 100644 --- a/target/linux/generic/backport-5.10/103-v5.13-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch +++ b/target/linux/generic/backport-5.10/103-v5.13-MIPS-select-CPU_MIPS64-for-remaining-MIPS64-CPUs.patch @@ -25,7 +25,7 @@ Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -2080,7 +2080,7 @@ config CPU_MIPS32 +@@ -2081,7 +2081,7 @@ config CPU_MIPS32 config CPU_MIPS64 bool default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 || CPU_MIPS64_R5 || \ diff --git a/target/linux/generic/backport-5.10/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch b/target/linux/generic/backport-5.10/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch index 58cfd5da93..680b88d8d3 100644 --- a/target/linux/generic/backport-5.10/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch +++ b/target/linux/generic/backport-5.10/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch @@ -18,7 +18,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> --- a/net/core/dev.c +++ b/net/core/dev.c -@@ -6799,15 +6799,10 @@ void __netif_napi_del(struct napi_struct +@@ -6802,15 +6802,10 @@ void __netif_napi_del(struct napi_struct } EXPORT_SYMBOL(__netif_napi_del); @@ -35,7 +35,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> weight = n->weight; /* This NAPI_STATE_SCHED test is for avoiding a race -@@ -6827,7 +6822,7 @@ static int napi_poll(struct napi_struct +@@ -6830,7 +6825,7 @@ static int napi_poll(struct napi_struct n->poll, work, weight); if (likely(work < weight)) @@ -44,7 +44,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> /* Drivers must not modify the NAPI state if they * consume the entire weight. In such cases this code -@@ -6836,7 +6831,7 @@ static int napi_poll(struct napi_struct +@@ -6839,7 +6834,7 @@ static int napi_poll(struct napi_struct */ if (unlikely(napi_disable_pending(n))) { napi_complete(n); @@ -53,7 +53,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> } if (n->gro_bitmask) { -@@ -6854,12 +6849,29 @@ static int napi_poll(struct napi_struct +@@ -6857,12 +6852,29 @@ static int napi_poll(struct napi_struct if (unlikely(!list_empty(&n->poll_list))) { pr_warn_once("%s: Budget exhausted after napi rescheduled\n", n->dev ? n->dev->name : "backlog"); diff --git a/target/linux/generic/backport-5.10/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch b/target/linux/generic/backport-5.10/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch index 4fde0bb708..ef94cc8e01 100644 --- a/target/linux/generic/backport-5.10/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch +++ b/target/linux/generic/backport-5.10/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch @@ -131,7 +131,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> static int __dev_open(struct net_device *dev, struct netlink_ext_ack *extack) { const struct net_device_ops *ops = dev->netdev_ops; -@@ -4261,6 +4283,21 @@ int gro_normal_batch __read_mostly = 8; +@@ -4264,6 +4286,21 @@ int gro_normal_batch __read_mostly = 8; static inline void ____napi_schedule(struct softnet_data *sd, struct napi_struct *napi) { @@ -153,7 +153,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> list_add_tail(&napi->poll_list, &sd->poll_list); __raise_softirq_irqoff(NET_RX_SOFTIRQ); } -@@ -6752,6 +6789,12 @@ void netif_napi_add(struct net_device *d +@@ -6755,6 +6792,12 @@ void netif_napi_add(struct net_device *d set_bit(NAPI_STATE_NPSVC, &napi->state); list_add_rcu(&napi->dev_list, &dev->napi_list); napi_hash_add(napi); @@ -166,7 +166,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> } EXPORT_SYMBOL(netif_napi_add); -@@ -6768,9 +6811,28 @@ void napi_disable(struct napi_struct *n) +@@ -6771,9 +6814,28 @@ void napi_disable(struct napi_struct *n) hrtimer_cancel(&n->timer); clear_bit(NAPI_STATE_DISABLE, &n->state); @@ -195,7 +195,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> static void flush_gro_hash(struct napi_struct *napi) { int i; -@@ -6796,6 +6858,11 @@ void __netif_napi_del(struct napi_struct +@@ -6799,6 +6861,11 @@ void __netif_napi_del(struct napi_struct flush_gro_hash(napi); napi->gro_bitmask = 0; @@ -207,7 +207,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> } EXPORT_SYMBOL(__netif_napi_del); -@@ -6877,6 +6944,51 @@ static int napi_poll(struct napi_struct +@@ -6880,6 +6947,51 @@ static int napi_poll(struct napi_struct return work; } diff --git a/target/linux/generic/backport-5.10/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch b/target/linux/generic/backport-5.10/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch index dfe8b68d4a..de1cd08df4 100644 --- a/target/linux/generic/backport-5.10/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch +++ b/target/linux/generic/backport-5.10/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch @@ -57,7 +57,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> * @n: NAPI context --- a/net/core/dev.c +++ b/net/core/dev.c -@@ -4287,8 +4287,9 @@ static inline void ____napi_schedule(str +@@ -4290,8 +4290,9 @@ static inline void ____napi_schedule(str if (test_bit(NAPI_STATE_THREADED, &napi->state)) { /* Paired with smp_mb__before_atomic() in @@ -69,7 +69,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> * wake_up_process() when it's not NULL. */ thread = READ_ONCE(napi->thread); -@@ -6762,6 +6763,49 @@ static void init_gro_hash(struct napi_st +@@ -6765,6 +6766,49 @@ static void init_gro_hash(struct napi_st napi->gro_bitmask = 0; } @@ -121,7 +121,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> { --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c -@@ -538,6 +538,45 @@ static ssize_t phys_switch_id_show(struc +@@ -587,6 +587,45 @@ static ssize_t phys_switch_id_show(struc } static DEVICE_ATTR_RO(phys_switch_id); @@ -167,7 +167,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> static struct attribute *net_class_attrs[] __ro_after_init = { &dev_attr_netdev_group.attr, &dev_attr_type.attr, -@@ -570,6 +609,7 @@ static struct attribute *net_class_attrs +@@ -619,6 +658,7 @@ static struct attribute *net_class_attrs &dev_attr_proto_down.attr, &dev_attr_carrier_up_count.attr, &dev_attr_carrier_down_count.attr, diff --git a/target/linux/generic/backport-5.10/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch b/target/linux/generic/backport-5.10/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch index 6617ee172e..a9e83a6d23 100644 --- a/target/linux/generic/backport-5.10/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch +++ b/target/linux/generic/backport-5.10/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch @@ -45,7 +45,7 @@ Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> enum gro_result { --- a/net/core/dev.c +++ b/net/core/dev.c -@@ -4294,6 +4294,8 @@ static inline void ____napi_schedule(str +@@ -4297,6 +4297,8 @@ static inline void ____napi_schedule(str */ thread = READ_ONCE(napi->thread); if (thread) { @@ -54,7 +54,7 @@ Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> wake_up_process(thread); return; } -@@ -6554,7 +6556,8 @@ bool napi_complete_done(struct napi_stru +@@ -6557,7 +6559,8 @@ bool napi_complete_done(struct napi_stru WARN_ON_ONCE(!(val & NAPIF_STATE_SCHED)); @@ -64,7 +64,7 @@ Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> /* If STATE_MISSED was set, leave STATE_SCHED set, * because we will call napi->poll() one more time. -@@ -6990,16 +6993,25 @@ static int napi_poll(struct napi_struct +@@ -6993,16 +6996,25 @@ static int napi_poll(struct napi_struct static int napi_thread_wait(struct napi_struct *napi) { diff --git a/target/linux/generic/backport-5.10/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch b/target/linux/generic/backport-5.10/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch index 1ea38ed286..d012f49bf5 100644 --- a/target/linux/generic/backport-5.10/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch +++ b/target/linux/generic/backport-5.10/604-v5.12-net-fix-hangup-on-napi_disable-for-threaded-napi.patch @@ -34,7 +34,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org> --- a/net/core/dev.c +++ b/net/core/dev.c -@@ -6997,7 +6997,7 @@ static int napi_thread_wait(struct napi_ +@@ -7000,7 +7000,7 @@ static int napi_thread_wait(struct napi_ set_current_state(TASK_INTERRUPTIBLE); @@ -43,7 +43,7 @@ Signed-off-by: Jakub Kicinski <kuba@kernel.org> /* Testing SCHED_THREADED bit here to make sure the current * kthread owns this napi and could poll on this napi. * Testing SCHED bit is not enough because SCHED bit might be -@@ -7015,6 +7015,7 @@ static int napi_thread_wait(struct napi_ +@@ -7018,6 +7018,7 @@ static int napi_thread_wait(struct napi_ set_current_state(TASK_INTERRUPTIBLE); } __set_current_state(TASK_RUNNING); diff --git a/target/linux/generic/backport-5.10/610-v5.13-56-netfilter-conntrack-Introduce-udp-offload-timeout-co.patch b/target/linux/generic/backport-5.10/610-v5.13-56-netfilter-conntrack-Introduce-udp-offload-timeout-co.patch index 8a70f375ed..416e20356d 100644 --- a/target/linux/generic/backport-5.10/610-v5.13-56-netfilter-conntrack-Introduce-udp-offload-timeout-co.patch +++ b/target/linux/generic/backport-5.10/610-v5.13-56-netfilter-conntrack-Introduce-udp-offload-timeout-co.patch @@ -33,7 +33,7 @@ Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> struct nf_icmp_net { --- a/net/netfilter/nf_conntrack_proto_udp.c +++ b/net/netfilter/nf_conntrack_proto_udp.c -@@ -270,6 +270,11 @@ void nf_conntrack_udp_init_net(struct ne +@@ -273,6 +273,11 @@ void nf_conntrack_udp_init_net(struct ne for (i = 0; i < UDP_CT_MAX; i++) un->timeouts[i] = udp_timeouts[i]; diff --git a/target/linux/generic/backport-5.10/732-net-next-1-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch b/target/linux/generic/backport-5.10/732-net-next-1-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch index 340efbd7bc..ab723b7b42 100644 --- a/target/linux/generic/backport-5.10/732-net-next-1-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch +++ b/target/linux/generic/backport-5.10/732-net-next-1-of-net-pass-the-dst-buffer-to-of_get_mac_address.patch @@ -1501,7 +1501,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> if (ret) --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c -@@ -1687,7 +1687,6 @@ davinci_emac_of_get_pdata(struct platfor +@@ -1699,7 +1699,6 @@ davinci_emac_of_get_pdata(struct platfor const struct of_device_id *match; const struct emac_platform_data *auxdata; struct emac_platform_data *pdata = NULL; @@ -1509,7 +1509,7 @@ Signed-off-by: David S. Miller <davem@davemloft.net> if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node) return dev_get_platdata(&pdev->dev); -@@ -1699,11 +1698,8 @@ davinci_emac_of_get_pdata(struct platfor +@@ -1711,11 +1710,8 @@ davinci_emac_of_get_pdata(struct platfor np = pdev->dev.of_node; pdata->version = EMAC_VERSION_2; diff --git a/target/linux/generic/hack-5.10/410-block-fit-partition-parser.patch b/target/linux/generic/hack-5.10/410-block-fit-partition-parser.patch index 41d4fd54fc..c0b3c25339 100644 --- a/target/linux/generic/hack-5.10/410-block-fit-partition-parser.patch +++ b/target/linux/generic/hack-5.10/410-block-fit-partition-parser.patch @@ -1,6 +1,6 @@ --- a/block/blk.h +++ b/block/blk.h -@@ -355,6 +355,7 @@ char *disk_name(struct gendisk *hd, int +@@ -361,6 +361,7 @@ char *disk_name(struct gendisk *hd, int #define ADDPART_FLAG_NONE 0 #define ADDPART_FLAG_RAID 1 #define ADDPART_FLAG_WHOLEDISK 2 diff --git a/target/linux/generic/hack-5.10/661-use_fq_codel_by_default.patch b/target/linux/generic/hack-5.10/661-use_fq_codel_by_default.patch index 460fb86542..70200f3eb3 100644 --- a/target/linux/generic/hack-5.10/661-use_fq_codel_by_default.patch +++ b/target/linux/generic/hack-5.10/661-use_fq_codel_by_default.patch @@ -14,7 +14,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h -@@ -623,12 +623,13 @@ extern struct Qdisc_ops noop_qdisc_ops; +@@ -625,12 +625,13 @@ extern struct Qdisc_ops noop_qdisc_ops; extern struct Qdisc_ops pfifo_fast_ops; extern struct Qdisc_ops mq_qdisc_ops; extern struct Qdisc_ops noqueue_qdisc_ops; diff --git a/target/linux/generic/hack-5.10/721-net-add-packet-mangeling.patch b/target/linux/generic/hack-5.10/721-net-add-packet-mangeling.patch index b6fe6c65d3..67808c35f8 100644 --- a/target/linux/generic/hack-5.10/721-net-add-packet-mangeling.patch +++ b/target/linux/generic/hack-5.10/721-net-add-packet-mangeling.patch @@ -105,7 +105,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> help --- a/net/core/dev.c +++ b/net/core/dev.c -@@ -3644,6 +3644,11 @@ static int xmit_one(struct sk_buff *skb, +@@ -3646,6 +3646,11 @@ static int xmit_one(struct sk_buff *skb, if (dev_nit_active(dev)) dev_queue_xmit_nit(skb, dev); diff --git a/target/linux/generic/hack-5.10/904-debloat_dma_buf.patch b/target/linux/generic/hack-5.10/904-debloat_dma_buf.patch index cd63206d43..f6228189da 100644 --- a/target/linux/generic/hack-5.10/904-debloat_dma_buf.patch +++ b/target/linux/generic/hack-5.10/904-debloat_dma_buf.patch @@ -63,7 +63,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> +dma-shared-buffer-objs := $(dma-buf-objs-y) --- a/drivers/dma-buf/dma-buf.c +++ b/drivers/dma-buf/dma-buf.c -@@ -1418,4 +1418,5 @@ static void __exit dma_buf_deinit(void) +@@ -1419,4 +1419,5 @@ static void __exit dma_buf_deinit(void) dma_buf_uninit_debugfs(); kern_unmount(dma_buf_mnt); } diff --git a/target/linux/generic/pending-5.10/300-mips_expose_boot_raw.patch b/target/linux/generic/pending-5.10/300-mips_expose_boot_raw.patch index 59f399d3cf..240c367e59 100644 --- a/target/linux/generic/pending-5.10/300-mips_expose_boot_raw.patch +++ b/target/linux/generic/pending-5.10/300-mips_expose_boot_raw.patch @@ -19,7 +19,7 @@ Acked-by: Rob Landley <rob@landley.net> config CEVT_BCM1480 bool -@@ -3174,6 +3171,18 @@ choice +@@ -3175,6 +3172,18 @@ choice bool "Extend builtin kernel arguments with bootloader arguments" endchoice diff --git a/target/linux/generic/pending-5.10/680-NET-skip-GRO-for-foreign-MAC-addresses.patch b/target/linux/generic/pending-5.10/680-NET-skip-GRO-for-foreign-MAC-addresses.patch index 5140b50924..6f11ba18f5 100644 --- a/target/linux/generic/pending-5.10/680-NET-skip-GRO-for-foreign-MAC-addresses.patch +++ b/target/linux/generic/pending-5.10/680-NET-skip-GRO-for-foreign-MAC-addresses.patch @@ -32,7 +32,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> __u16 tc_index; /* traffic control index */ --- a/net/core/dev.c +++ b/net/core/dev.c -@@ -6056,6 +6056,9 @@ static enum gro_result dev_gro_receive(s +@@ -6059,6 +6059,9 @@ static enum gro_result dev_gro_receive(s int same_flow; int grow; @@ -42,7 +42,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> if (netif_elide_gro(skb->dev)) goto normal; -@@ -8033,6 +8036,48 @@ static void __netdev_adjacent_dev_unlink +@@ -8036,6 +8039,48 @@ static void __netdev_adjacent_dev_unlink &upper_dev->adj_list.lower); } @@ -91,7 +91,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> static int __netdev_upper_dev_link(struct net_device *dev, struct net_device *upper_dev, bool master, void *upper_priv, void *upper_info, -@@ -8084,6 +8129,7 @@ static int __netdev_upper_dev_link(struc +@@ -8087,6 +8132,7 @@ static int __netdev_upper_dev_link(struc if (ret) return ret; @@ -99,7 +99,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER, &changeupper_info.info); ret = notifier_to_errno(ret); -@@ -8180,6 +8226,7 @@ static void __netdev_upper_dev_unlink(st +@@ -8183,6 +8229,7 @@ static void __netdev_upper_dev_unlink(st __netdev_adjacent_dev_unlink_neighbour(dev, upper_dev); @@ -107,7 +107,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> call_netdevice_notifiers_info(NETDEV_CHANGEUPPER, &changeupper_info.info); -@@ -8966,6 +9013,7 @@ int dev_set_mac_address(struct net_devic +@@ -8969,6 +9016,7 @@ int dev_set_mac_address(struct net_devic if (err) return err; dev->addr_assign_type = NET_ADDR_SET; diff --git a/target/linux/ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch b/target/linux/ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch index 5a970e87ac..a1a0371fbc 100644 --- a/target/linux/ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch +++ b/target/linux/ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch @@ -13,9 +13,9 @@ Signed-off-by: John Crispin <john@phrozen.org> @@ -61,7 +61,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i # macro, but instead defines a whole series of macros which makes # testing for a specific architecture or later rather impossible. - arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m --arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a) + arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m +-arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -march=armv7-a +arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15 - arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) + arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 -march=armv6 # Only override the compiler option if ARMv6. The ARMv6K extensions are # always available in ARMv7 diff --git a/target/linux/lantiq/patches-5.10/0016-mtd-rawnand-xway-Keep-the-driver-compatible-with-on-.patch b/target/linux/lantiq/patches-5.10/0016-mtd-rawnand-xway-Keep-the-driver-compatible-with-on-.patch deleted file mode 100644 index 4f23cc94d7..0000000000 --- a/target/linux/lantiq/patches-5.10/0016-mtd-rawnand-xway-Keep-the-driver-compatible-with-on-.patch +++ /dev/null @@ -1,68 +0,0 @@ -From ae9a2ac4d283b2925a97523a05ea024499329c16 Mon Sep 17 00:00:00 2001 -From: Miquel Raynal <miquel.raynal@bootlin.com> -Date: Wed, 29 Sep 2021 00:22:58 +0200 -Subject: [PATCH] mtd: rawnand: xway: Keep the driver compatible with on-die - ECC engines - -Following the introduction of the generic ECC engine infrastructure, it -was necessary to reorganize the code and move the ECC configuration in -the ->attach_chip() hook. Failing to do that properly lead to a first -series of fixes supposed to stabilize the situation. Unfortunately, this -only fixed the use of software ECC engines, preventing any other kind of -engine to be used, including on-die ones. - -It is now time to (finally) fix the situation by ensuring that we still -provide a default (eg. software ECC) but will still support different -ECC engines such as on-die ECC engines if properly described in the -device tree. - -There are no changes needed on the core side in order to do this, but we -just need to leverage the logic there which allows: -1- a subsystem default (set to Host engines in the raw NAND world) -2- a driver specific default (here set to software ECC engines) -3- any type of engine requested by the user (ie. described in the DT) - -As the raw NAND subsystem has not yet been fully converted to the ECC -engine infrastructure, in order to provide a default ECC engine for this -driver we need to set chip->ecc.engine_type *before* calling -nand_scan(). During the initialization step, the core will consider this -entry as the default engine for this driver. This value may of course -be overloaded by the user if the usual DT properties are provided. - -Fixes: d525914b5bd8 ("mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()") -Cc: stable@vger.kernel.org -Cc: Jan Hoffmann <jan@3e8.eu> -Cc: Kestrel seventyfour <kestrelseventyfour@gmail.com> -Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> ---- - drivers/mtd/nand/raw/xway_nand.c | 12 +++++++++--- - 1 file changed, 9 insertions(+), 3 deletions(-) - ---- a/drivers/mtd/nand/raw/xway_nand.c -+++ b/drivers/mtd/nand/raw/xway_nand.c -@@ -148,9 +148,8 @@ static void xway_write_buf(struct nand_c - - static int xway_attach_chip(struct nand_chip *chip) - { -- chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT; -- -- if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN) -+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT && -+ chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN) - chip->ecc.algo = NAND_ECC_ALGO_HAMMING; - - return 0; -@@ -219,6 +218,13 @@ static int xway_nand_probe(struct platfo - | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P - | cs_flag, EBU_NAND_CON); - -+ /* -+ * This driver assumes that the default ECC engine should be TYPE_SOFT. -+ * Set ->engine_type before registering the NAND devices in order to -+ * provide a driver specific default value. -+ */ -+ data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT; -+ - /* Scan to find existence of the device */ - err = nand_scan(&data->chip, 1); - if (err) diff --git a/target/linux/lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch b/target/linux/lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch deleted file mode 100644 index 05227c8f89..0000000000 --- a/target/linux/lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 497acc03cd3918baabe25d46e30c5c62b998e24d Mon Sep 17 00:00:00 2001 -From: Aleksander Jan Bajkowski <olek2@wp.pl> -Date: Sat, 19 Jun 2021 13:38:12 +0200 -Subject: [PATCH 1/5] MIPS: lantiq: dma: add small delay after reset - -Reading the DMA registers immediately after the reset causes -Data Bus Error. Adding a small delay fixes this problem. - -Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> ---- - arch/mips/lantiq/xway/dma.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/arch/mips/lantiq/xway/dma.c -+++ b/arch/mips/lantiq/xway/dma.c -@@ -11,6 +11,7 @@ - #include <linux/export.h> - #include <linux/spinlock.h> - #include <linux/clk.h> -+#include <linux/delay.h> - #include <linux/err.h> - - #include <lantiq_soc.h> -@@ -221,6 +222,8 @@ ltq_dma_init(struct platform_device *pde - clk_enable(clk); - ltq_dma_w32_mask(0, DMA_RESET, LTQ_DMA_CTRL); - -+ usleep_range(1, 10); -+ - /* disable all interrupts */ - ltq_dma_w32(0, LTQ_DMA_IRNEN); - diff --git a/target/linux/lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch b/target/linux/lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch deleted file mode 100644 index 5d1862d576..0000000000 --- a/target/linux/lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch +++ /dev/null @@ -1,68 +0,0 @@ -From d31260c2f6a5cdddb052ab7cb09560eb23ce6597 Mon Sep 17 00:00:00 2001 -From: Aleksander Jan Bajkowski <olek2@wp.pl> -Date: Thu, 15 Apr 2021 21:28:24 +0200 -Subject: [PATCH 2/5] MIPS: lantiq: dma: reset correct number of channel - -Different SoCs have a different number of channels, e.g .: -* amazon-se has 10 channels, -* danube+ar9 have 20 channels, -* vr9 has 28 channels, -* ar10 has 24 channels. - -We can read the ID register and, depending on the reported -number of channels, reset the appropriate number of channels. - -Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> ---- - arch/mips/lantiq/xway/dma.c | 11 ++++++----- - 1 file changed, 6 insertions(+), 5 deletions(-) - ---- a/arch/mips/lantiq/xway/dma.c -+++ b/arch/mips/lantiq/xway/dma.c -@@ -30,6 +30,7 @@ - #define LTQ_DMA_PCTRL 0x44 - #define LTQ_DMA_IRNEN 0xf4 - -+#define DMA_ID_CHNR GENMASK(26, 20) /* channel number */ - #define DMA_DESCPT BIT(3) /* descriptor complete irq */ - #define DMA_TX BIT(8) /* TX channel direction */ - #define DMA_CHAN_ON BIT(0) /* channel on / off bit */ -@@ -40,7 +41,6 @@ - #define DMA_POLL BIT(31) /* turn on channel polling */ - #define DMA_CLK_DIV4 BIT(6) /* polling clock divider */ - #define DMA_2W_BURST BIT(1) /* 2 word burst length */ --#define DMA_MAX_CHANNEL 20 /* the soc has 20 channels */ - #define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */ - #define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */ - -@@ -206,7 +206,7 @@ ltq_dma_init(struct platform_device *pde - { - struct clk *clk; - struct resource *res; -- unsigned id; -+ unsigned int id, nchannels; - int i; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -@@ -228,17 +228,18 @@ ltq_dma_init(struct platform_device *pde - ltq_dma_w32(0, LTQ_DMA_IRNEN); - - /* reset/configure each channel */ -- for (i = 0; i < DMA_MAX_CHANNEL; i++) { -+ id = ltq_dma_r32(LTQ_DMA_ID); -+ nchannels = ((id & DMA_ID_CHNR) >> 20); -+ for (i = 0; i < nchannels; i++) { - ltq_dma_w32(i, LTQ_DMA_CS); - ltq_dma_w32(DMA_CHAN_RST, LTQ_DMA_CCTRL); - ltq_dma_w32(DMA_POLL | DMA_CLK_DIV4, LTQ_DMA_CPOLL); - ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); - } - -- id = ltq_dma_r32(LTQ_DMA_ID); - dev_info(&pdev->dev, - "Init done - hw rev: %X, ports: %d, channels: %d\n", -- id & 0x1f, (id >> 16) & 0xf, id >> 20); -+ id & 0x1f, (id >> 16) & 0xf, nchannels); - - return 0; - } diff --git a/target/linux/lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch b/target/linux/lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch deleted file mode 100644 index 67423d2e97..0000000000 --- a/target/linux/lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch +++ /dev/null @@ -1,41 +0,0 @@ -From 7d9ea9052d6680d2910b8b005c397d95b3a8b012 Mon Sep 17 00:00:00 2001 -From: Aleksander Jan Bajkowski <olek2@wp.pl> -Date: Wed, 7 Apr 2021 21:04:39 +0200 -Subject: [PATCH 3/5] MIPS: lantiq: dma: fix burst length for DEU - -The current definition of 2W burst length is invalid. -This patch fixes it. Current downstream DEU driver doesn't -use DMA. An incorrect burst length value doesn't cause any -errors. This patch also adds other burst length values. - -Fixes: dfec1a827d2b ("MIPS: Lantiq: Add DMA support") -Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> ---- - arch/mips/lantiq/xway/dma.c | 9 +++++++-- - 1 file changed, 7 insertions(+), 2 deletions(-) - ---- a/arch/mips/lantiq/xway/dma.c -+++ b/arch/mips/lantiq/xway/dma.c -@@ -40,7 +40,11 @@ - #define DMA_IRQ_ACK 0x7e /* IRQ status register */ - #define DMA_POLL BIT(31) /* turn on channel polling */ - #define DMA_CLK_DIV4 BIT(6) /* polling clock divider */ --#define DMA_2W_BURST BIT(1) /* 2 word burst length */ -+#define DMA_PCTRL_2W_BURST 0x1 /* 2 word burst length */ -+#define DMA_PCTRL_4W_BURST 0x2 /* 4 word burst length */ -+#define DMA_PCTRL_8W_BURST 0x3 /* 8 word burst length */ -+#define DMA_TX_BURST_SHIFT 4 /* tx burst shift */ -+#define DMA_RX_BURST_SHIFT 2 /* rx burst shift */ - #define DMA_ETOP_ENDIANNESS (0xf << 8) /* endianness swap etop channels */ - #define DMA_WEIGHT (BIT(17) | BIT(16)) /* default channel wheight */ - -@@ -191,7 +195,8 @@ ltq_dma_init_port(int p) - break; - - case DMA_PORT_DEU: -- ltq_dma_w32((DMA_2W_BURST << 4) | (DMA_2W_BURST << 2), -+ ltq_dma_w32((DMA_PCTRL_2W_BURST << DMA_TX_BURST_SHIFT) | -+ (DMA_PCTRL_2W_BURST << DMA_RX_BURST_SHIFT), - LTQ_DMA_PCTRL); - break; - diff --git a/target/linux/lantiq/patches-5.10/0152-lantiq-VPE.patch b/target/linux/lantiq/patches-5.10/0152-lantiq-VPE.patch index 2444f12df8..49285500bf 100644 --- a/target/linux/lantiq/patches-5.10/0152-lantiq-VPE.patch +++ b/target/linux/lantiq/patches-5.10/0152-lantiq-VPE.patch @@ -1,6 +1,6 @@ --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -2430,6 +2430,12 @@ config MIPS_VPE_LOADER +@@ -2431,6 +2431,12 @@ config MIPS_VPE_LOADER Includes a loader for loading an elf relocatable object onto another VPE and running it. diff --git a/target/linux/mediatek/patches-5.10/410-bt-mtk-serial-fix.patch b/target/linux/mediatek/patches-5.10/410-bt-mtk-serial-fix.patch index 5a819293a5..d18f49e1b7 100644 --- a/target/linux/mediatek/patches-5.10/410-bt-mtk-serial-fix.patch +++ b/target/linux/mediatek/patches-5.10/410-bt-mtk-serial-fix.patch @@ -19,7 +19,7 @@ }, [PORT_NPCM] = { .name = "Nuvoton 16550", -@@ -2719,6 +2719,11 @@ serial8250_do_set_termios(struct uart_po +@@ -2732,6 +2732,11 @@ serial8250_do_set_termios(struct uart_po unsigned long flags; unsigned int baud, quot, frac = 0; diff --git a/target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1-support.patch index 4da431ec23..9bf9154e91 100644 --- a/target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1-support.patch +++ b/target/linux/mpc85xx/patches-5.10/100-powerpc-85xx-tl-wdr4900-v1-support.patch @@ -73,7 +73,7 @@ Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> help --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile -@@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC) += coren +@@ -28,6 +28,7 @@ obj-$(CONFIG_CORENET_GENERIC) += coren obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o obj-$(CONFIG_STX_GP3) += stx_gp3.o obj-$(CONFIG_TQM85xx) += tqm85xx.o diff --git a/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap-330-support.patch b/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap-330-support.patch index 34568398c2..da95cd2716 100644 --- a/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap-330-support.patch +++ b/target/linux/mpc85xx/patches-5.10/101-powerpc-85xx-hiveap-330-support.patch @@ -20,7 +20,7 @@ select DEFAULT_UIMAGE --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile -@@ -10,6 +10,7 @@ obj-y += common.o +@@ -12,6 +12,7 @@ obj-y += common.o obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o obj-$(CONFIG_C293_PCIE) += c293pcie.o diff --git a/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w-rev1.patch b/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w-rev1.patch index 2900a1bea2..3c64b06847 100644 --- a/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w-rev1.patch +++ b/target/linux/mpc85xx/patches-5.10/103-powerpc-85xx-red-15w-rev1.patch @@ -19,7 +19,7 @@ help --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile -@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o +@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o obj-$(CONFIG_TWR_P102x) += twr_p102x.o obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o diff --git a/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda-support.patch b/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda-support.patch index a08bc302f2..4913c614a8 100644 --- a/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda-support.patch +++ b/target/linux/mpc85xx/patches-5.10/105-powerpc-85xx-panda-support.patch @@ -20,7 +20,7 @@ select DEFAULT_UIMAGE --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile -@@ -22,6 +22,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o +@@ -24,6 +24,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o obj-$(CONFIG_P1022_DS) += p1022_ds.o obj-$(CONFIG_P1022_RDK) += p1022_rdk.o obj-$(CONFIG_P1023_RDB) += p1023_rdb.o diff --git a/target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws-ap3710i-support.patch b/target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws-ap3710i-support.patch index 4bacedbcd7..124376ffd9 100644 --- a/target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws-ap3710i-support.patch +++ b/target/linux/mpc85xx/patches-5.10/106-powerpc-85xx-ws-ap3710i-support.patch @@ -20,7 +20,7 @@ select DEFAULT_UIMAGE --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile -@@ -24,6 +24,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o +@@ -26,6 +26,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o obj-$(CONFIG_P1023_RDB) += p1023_rdb.o obj-$(CONFIG_PANDA) += panda.o obj-$(CONFIG_TWR_P102x) += twr_p102x.o diff --git a/target/linux/octeontx/patches-5.10/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch b/target/linux/octeontx/patches-5.10/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch index d4cf5af31f..9bedaa1a87 100644 --- a/target/linux/octeontx/patches-5.10/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch +++ b/target/linux/octeontx/patches-5.10/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch @@ -22,7 +22,7 @@ Signed-off-by: Tim Harvey <tharvey@gateworks.com> #include <linux/platform_data/x86/apple.h> #include <linux/pm_runtime.h> #include <linux/suspend.h> -@@ -5762,3 +5763,34 @@ static void apex_pci_fixup_class(struct +@@ -5763,3 +5764,34 @@ static void apex_pci_fixup_class(struct } DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a, PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class); diff --git a/target/linux/ramips/patches-5.10/720-Revert-net-phy-simplify-phy_link_change-arguments.patch b/target/linux/ramips/patches-5.10/720-Revert-net-phy-simplify-phy_link_change-arguments.patch index c9fcefe18b..ca8550e15f 100644 --- a/target/linux/ramips/patches-5.10/720-Revert-net-phy-simplify-phy_link_change-arguments.patch +++ b/target/linux/ramips/patches-5.10/720-Revert-net-phy-simplify-phy_link_change-arguments.patch @@ -60,7 +60,7 @@ still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c } return 0; -@@ -1186,7 +1186,7 @@ void phy_state_machine(struct work_struc +@@ -1191,7 +1191,7 @@ void phy_state_machine(struct work_struc case PHY_HALTED: if (phydev->link) { phydev->link = 0; diff --git a/target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch b/target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch index 0ef06615b6..b83daffd4f 100644 --- a/target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch +++ b/target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch @@ -23,7 +23,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> } return 0; -@@ -1186,7 +1189,10 @@ void phy_state_machine(struct work_struc +@@ -1191,7 +1194,10 @@ void phy_state_machine(struct work_struc case PHY_HALTED: if (phydev->link) { phydev->link = 0; diff --git a/target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch index a01f3a1078..4708076e89 100644 --- a/target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch +++ b/target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch @@ -13,7 +13,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c -@@ -3004,6 +3004,18 @@ static const struct usb_device_id uvc_id +@@ -3009,6 +3009,18 @@ static const struct usb_device_id uvc_id .bInterfaceSubClass = 1, .bInterfaceProtocol = 0, .driver_info = UVC_INFO_META(V4L2_META_FMT_D4XX) }, @@ -64,7 +64,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> #include <media/v4l2-common.h> -@@ -1183,9 +1188,149 @@ static void uvc_video_decode_data(struct +@@ -1188,9 +1193,149 @@ static void uvc_video_decode_data(struct uvc_urb->async_operations++; } @@ -214,7 +214,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> /* Mark the buffer as done if the EOF marker is set. */ if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) { uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); -@@ -1742,6 +1887,8 @@ static int uvc_init_video_isoc(struct uv +@@ -1747,6 +1892,8 @@ static int uvc_init_video_isoc(struct uv if (npackets == 0) return -ENOMEM; diff --git a/target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch b/target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch index 634033d18d..6712af295a 100644 --- a/target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch +++ b/target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c -@@ -418,6 +418,9 @@ uart_get_baud_rate(struct uart_port *por +@@ -425,6 +425,9 @@ uart_get_baud_rate(struct uart_port *por break; } diff --git a/target/linux/realtek/patches-5.10/302-clocksource-add-rtl9300-driver.patch b/target/linux/realtek/patches-5.10/302-clocksource-add-rtl9300-driver.patch index a78f070d63..365a62bf30 100644 --- a/target/linux/realtek/patches-5.10/302-clocksource-add-rtl9300-driver.patch +++ b/target/linux/realtek/patches-5.10/302-clocksource-add-rtl9300-driver.patch @@ -1,6 +1,6 @@ --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig -@@ -126,6 +126,15 @@ config RDA_TIMER +@@ -127,6 +127,15 @@ config RDA_TIMER help Enables the support for the RDA Micro timer driver. |