aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ar71xx/Makefile24
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds1130
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network711
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/03_gpio_switches42
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh599
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom178
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata195
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac24
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix52
-rw-r--r--target/linux/ar71xx/base-files/etc/inittab3
-rw-r--r--target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration108
-rw-r--r--target/linux/ar71xx/base-files/etc/uci-defaults/03_network-vlan-migration13
-rw-r--r--target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration84
-rw-r--r--target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum28
-rw-r--r--target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header17
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh1589
-rw-r--r--target/linux/ar71xx/base-files/lib/preinit/01_preinit_do_ar71xx.sh9
-rw-r--r--target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx60
-rw-r--r--target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx57
-rw-r--r--target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k50
-rw-r--r--target/linux/ar71xx/base-files/lib/upgrade/allnet.sh155
-rw-r--r--target/linux/ar71xx/base-files/lib/upgrade/dir825.sh165
-rw-r--r--target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh165
-rw-r--r--target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh232
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh915
-rw-r--r--target/linux/ar71xx/config-4.14485
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt2458
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile290
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.c173
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.h55
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.c36
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.h21
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c1262
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h55
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.c101
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.h17
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.c141
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.h34
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-a60.c181
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap120c.c147
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap96.c132
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-nx.c113
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-all0258n.c88
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-all0315n.c85
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s1.c98
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c103
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-antrouter-r1.c98
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap121f.c103
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap132.c189
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap143.c142
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap147.c125
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c140
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap531b0.c112
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c201
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap91-5g.c118
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ap96.c142
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c227
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c342
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c225
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c260
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c207
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c349
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c156
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-aw-nr580.c107
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c171
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c120
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-bsb.c83
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-c55.c132
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c265
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c133
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-cap4200ag.c131
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-carambola2.c105
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c765
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c281
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c152
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-cr3000.c168
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c179
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dap-1330-a1.c146
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c191
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c150
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c170
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dir-505-a1.c116
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dir-600-a1.c162
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c135
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c133
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c191
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c241
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dir-869-a1.c175
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-hotspot.c117
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c190
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c203
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-domywifi-dw33d.c192
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c224
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dr531.c155
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-dragino2.c136
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-e1700ac-v2.c145
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-e2100l.c126
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-e558-v2.c170
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-e600g-v2.c184
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c122
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-e750g-v8.c151
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-eap120.c126
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-eap300v2.c101
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-eap7660d.c181
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-el-m150.c112
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-el-mini.c86
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ens202ext.c124
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c177
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c176
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c200
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c110
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c138
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c189
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c132
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c242
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c179
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c125
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300.c103
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c158
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c146
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750s.c193
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c136
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-gl-inet.c104
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c114
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c87
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-gs-minibox-v32.c121
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v1.c143
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v5-2.c111
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-hiveap-121.c153
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-hiwifi-hc6361.c115
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-hornet-ub.c142
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ja76pf.c190
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-jwap003.c95
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c158
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c161
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-lan-turtle.c178
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-lima.c86
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mac1200r.c155
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mr12.c114
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mr16.c118
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c171
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mr18.c286
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c177
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c181
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c202
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c226
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c208
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w04nu.c124
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w300nh.c115
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-n5q.c132
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c220
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c385
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c320
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c218
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-om5pac.c193
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-om5pacv2.c215
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-omy-g1.c123
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-omy-x1.c106
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-onion-omega.c84
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-pb42.c83
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c99
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c166
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-r36a.c140
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-r602n.c213
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-r6100.c146
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c92
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c406
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rb4xx.c465
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c349
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c348
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c361
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c327
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c1262
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rbsxtlite.c302
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-re450.c239
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c99
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rut9xx.c191
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-rw2458n.c91
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c145
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c132
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-sc450.c149
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c135
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-som9331.c125
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-sr3200.c187
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-t830.c127
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tellstick-znet-lite.c129
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tew-632brp.c111
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tew-673gru.c198
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tew-712br.c153
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tew-732br.c127
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tew-823dru.c181
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr11u.c183
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c107
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c126
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3x20.c147
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c151
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa701nd-v2.c116
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa7210n-v2.c125
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c137
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c132
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v2.c104
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v4.c115
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd.c127
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c445
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3320-v2.c146
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3500.c169
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c206
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c142
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c172
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c157
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c215
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c283
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd.c141
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c150
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr703n.c118
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr720n-v3.c108
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c187
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd.c130
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n.c117
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr810n.c149
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c286
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c457
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n.c140
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr902ac-v1.c145
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr940n-v4.c184
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c149
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd.c121
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr942n-v1.c279
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ts-d084.c86
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tube2h.c129
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c179
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-xm.c781
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt.c205
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wam250.c122
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-weio.c140
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-whr-hp-g300n.c155
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wi2a-ac200i.c217
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wifi-pineapple-nano.c107
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c114
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c195
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c105
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wndr3700.c172
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wndr4300.c215
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c637
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c214
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000.c102
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c246
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wp543.c109
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wpe72.c97
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wpj342.c178
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wpj344.c169
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c143
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wpj558.c170
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wpj563.c150
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wrt160nl.c126
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wrt400n.c161
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c126
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-450hp2.c221
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c202
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh.c279
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c174
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c169
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-z1.c164
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-zbt-we1526.c153
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c154
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h387
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/nvram.c85
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/nvram.h19
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.c126
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.h6
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/routerboot.c354
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/routerboot.h89
-rw-r--r--target/linux/ar71xx/files/arch/mips/include/asm/fw/myloader/myloader.h34
-rw-r--r--target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h65
-rw-r--r--target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h84
-rw-r--r--target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h43
-rw-r--r--target/linux/ar71xx/files/drivers/gpio/gpio-latch.c220
-rw-r--r--target/linux/ar71xx/files/drivers/gpio/gpio-nxp-74hc153.c243
-rw-r--r--target/linux/ar71xx/files/drivers/leds/leds-nu801.c396
-rw-r--r--target/linux/ar71xx/files/drivers/leds/leds-rb750.c144
-rw-r--r--target/linux/ar71xx/files/drivers/leds/leds-wndr3700-usb.c76
-rw-r--r--target/linux/ar71xx/files/drivers/mtd/cybertan_part.c206
-rw-r--r--target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c1591
-rw-r--r--target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c396
-rw-r--r--target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c440
-rw-r--r--target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c464
-rw-r--r--target/linux/ar71xx/files/drivers/mtd/tplinkpart.c235
-rw-r--r--target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c307
-rw-r--r--target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Kconfig33
-rw-r--r--target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Makefile15
-rw-r--r--target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx.h508
-rw-r--r--target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c1386
-rw-r--r--target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c44
-rw-r--r--target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c285
-rw-r--r--target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c120
-rw-r--r--target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c1494
-rw-r--r--target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c320
-rw-r--r--target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c261
-rw-r--r--target/linux/ar71xx/files/drivers/spi/spi-rb4xx-cpld.c347
-rw-r--r--target/linux/ar71xx/files/drivers/spi/spi-rb4xx.c430
-rw-r--r--target/linux/ar71xx/files/drivers/spi/spi-vsc7385.c621
-rw-r--r--target/linux/ar71xx/files/include/linux/leds-nu801.h38
-rw-r--r--target/linux/ar71xx/files/include/linux/nxp_74hc153.h24
-rw-r--r--target/linux/ar71xx/files/include/linux/platform/ar934x_nfc.h39
-rw-r--r--target/linux/ar71xx/files/include/linux/platform_data/gpio-latch.h14
-rw-r--r--target/linux/ar71xx/files/include/linux/platform_data/rb91x_nand.h16
-rw-r--r--target/linux/ar71xx/files/include/linux/spi/vsc7385.h19
-rw-r--r--target/linux/ar71xx/generic/config-default227
-rw-r--r--target/linux/ar71xx/generic/profiles/00-default.mk18
-rw-r--r--target/linux/ar71xx/generic/target.mk10
-rw-r--r--target/linux/ar71xx/image/Makefile69
-rw-r--r--target/linux/ar71xx/image/common-tp-link.mk108
-rw-r--r--target/linux/ar71xx/image/generic-legacy-devices.mk423
-rw-r--r--target/linux/ar71xx/image/generic-tp-link.mk544
-rw-r--r--target/linux/ar71xx/image/generic-ubnt.mk319
-rw-r--r--target/linux/ar71xx/image/generic.mk1352
-rw-r--r--target/linux/ar71xx/image/legacy.mk1059
-rw-r--r--target/linux/ar71xx/image/lzma-loader/Makefile70
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.c584
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.h113
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/LzmaTypes.h45
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/Makefile108
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/ar71xx_regs.h725
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/board.c56
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/cache.c43
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/cache.h17
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/cacheops.h85
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/config.h31
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/cp0regdef.h39
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/head.S134
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/loader.c264
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/loader.lds34
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/loader2.lds10
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/lzma-data.lds8
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/printf.c350
-rw-r--r--target/linux/ar71xx/image/lzma-loader/src/printf.h18
-rw-r--r--target/linux/ar71xx/image/mikrotik.mk61
-rw-r--r--target/linux/ar71xx/image/nand.mk137
-rw-r--r--target/linux/ar71xx/image/tiny-legacy-devices.mk161
-rw-r--r--target/linux/ar71xx/image/tiny-senao.mk28
-rw-r--r--target/linux/ar71xx/image/tiny-tp-link.mk695
-rw-r--r--target/linux/ar71xx/image/tiny.mk31
-rw-r--r--target/linux/ar71xx/image/ubinize-nbg6716.ini24
-rw-r--r--target/linux/ar71xx/image/ubinize-wndr4300.ini26
-rw-r--r--target/linux/ar71xx/mikrotik/config-default79
-rw-r--r--target/linux/ar71xx/mikrotik/profiles/00-default.mk18
-rw-r--r--target/linux/ar71xx/mikrotik/target.mk11
-rw-r--r--target/linux/ar71xx/modules.mk69
-rw-r--r--target/linux/ar71xx/nand/config-default70
-rw-r--r--target/linux/ar71xx/nand/profiles/00-default.mk18
-rw-r--r--target/linux/ar71xx/nand/target.mk9
-rw-r--r--target/linux/ar71xx/patches-4.14/001-spi-cs-gpio.patch20
-rw-r--r--target/linux/ar71xx/patches-4.14/002-add_back_gpio_function_select.patch92
-rw-r--r--target/linux/ar71xx/patches-4.14/004-register_gpio_driver_earlier.patch18
-rw-r--r--target/linux/ar71xx/patches-4.14/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch42
-rw-r--r--target/linux/ar71xx/patches-4.14/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch113
-rw-r--r--target/linux/ar71xx/patches-4.14/200-MIPS-ath79-fix-ar933x-wmac-reset.patch30
-rw-r--r--target/linux/ar71xx/patches-4.14/201-ar913x_wmac_external_reset.patch31
-rw-r--r--target/linux/ar71xx/patches-4.14/202-MIPS-ath79-ar934x-wmac-revision.patch11
-rw-r--r--target/linux/ar71xx/patches-4.14/220-add_cpu_feature_overrides.patch28
-rw-r--r--target/linux/ar71xx/patches-4.14/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch21
-rw-r--r--target/linux/ar71xx/patches-4.14/310-lib-add-rle-decompression.patch124
-rw-r--r--target/linux/ar71xx/patches-4.14/343-MIPS-ath79-Fix-potentially-missed-IRQ-handling-durin.patch52
-rw-r--r--target/linux/ar71xx/patches-4.14/401-mtd-physmap-add-lock-unlock.patch94
-rw-r--r--target/linux/ar71xx/patches-4.14/402-mtd-SST39VF6401B-support.patch29
-rw-r--r--target/linux/ar71xx/patches-4.14/404-mtd-cybertan-trx-parser.patch25
-rw-r--r--target/linux/ar71xx/patches-4.14/405-mtd-tp-link-partition-parser.patch25
-rw-r--r--target/linux/ar71xx/patches-4.14/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch34
-rw-r--r--target/linux/ar71xx/patches-4.14/408-mtd-redboot_partition_scan.patch44
-rw-r--r--target/linux/ar71xx/patches-4.14/409-mtd-rb4xx_nand_driver.patch21
-rw-r--r--target/linux/ar71xx/patches-4.14/410-mtd-rb750-nand-driver.patch21
-rw-r--r--target/linux/ar71xx/patches-4.14/411-mtd-cfi_cmdset_0002-force-word-write.patch61
-rw-r--r--target/linux/ar71xx/patches-4.14/413-mtd-ar934x-nand-driver.patch25
-rw-r--r--target/linux/ar71xx/patches-4.14/414-mtd-rb91x-nand-driver.patch23
-rw-r--r--target/linux/ar71xx/patches-4.14/420-net-ar71xx_mac_driver.patch28
-rw-r--r--target/linux/ar71xx/patches-4.14/423-dsa-add-88e6063-driver.patch27
-rw-r--r--target/linux/ar71xx/patches-4.14/430-drivers-link-spi-before-mtd.patch12
-rw-r--r--target/linux/ar71xx/patches-4.14/432-spi-rb4xx-spi-driver.patch25
-rw-r--r--target/linux/ar71xx/patches-4.14/433-spi-rb4xx-cpld-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-4.14/435-spi-vsc7385_driver.patch24
-rw-r--r--target/linux/ar71xx/patches-4.14/440-leds-wndr3700-usb-led-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-4.14/441-leds-rb750-led-driver.patch23
-rw-r--r--target/linux/ar71xx/patches-4.14/442-leds-gpio-allow-to-use-OPEN_-DRAIN-SOURCE-flags-with.patch45
-rw-r--r--target/linux/ar71xx/patches-4.14/450-gpio-nxp-74hc153-gpio-chip-driver.patch25
-rw-r--r--target/linux/ar71xx/patches-4.14/451-gpio-74x164-improve-platform-device-support.patch119
-rw-r--r--target/linux/ar71xx/patches-4.14/452-gpio-add-gpio-latch-driver.patch22
-rw-r--r--target/linux/ar71xx/patches-4.14/461-spi-ath79-add-fast-flash-read.patch60
-rw-r--r--target/linux/ar71xx/patches-4.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch111
-rw-r--r--target/linux/ar71xx/patches-4.14/490-usb-ehci-add-quirks-for-qca-socs.patch103
-rw-r--r--target/linux/ar71xx/patches-4.14/500-MIPS-fw-myloader.patch22
-rw-r--r--target/linux/ar71xx/patches-4.14/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch70
-rw-r--r--target/linux/ar71xx/patches-4.14/504-MIPS-ath79-add-ath79_device_reset_get.patch42
-rw-r--r--target/linux/ar71xx/patches-4.14/505-MIPS-ath79-add-ath79_gpio_function_select.patch39
-rw-r--r--target/linux/ar71xx/patches-4.14/506-MIPS-ath79-prom-parse-redboot-args.patch42
-rw-r--r--target/linux/ar71xx/patches-4.14/507-MIPS-ath79-prom-add-myloader-support.patch55
-rw-r--r--target/linux/ar71xx/patches-4.14/508-MIPS-ath79-prom-image-command-line-hack.patch73
-rw-r--r--target/linux/ar71xx/patches-4.14/509-MIPS-ath79-process-board-kernel-option.patch11
-rw-r--r--target/linux/ar71xx/patches-4.14/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch14
-rw-r--r--target/linux/ar71xx/patches-4.14/520-MIPS-ath79-enable-UART-function.patch18
-rw-r--r--target/linux/ar71xx/patches-4.14/521-MIPS-ath79-enable-UART-for-early_serial.patch61
-rw-r--r--target/linux/ar71xx/patches-4.14/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch21
-rw-r--r--target/linux/ar71xx/patches-4.14/523-MIPS-ath79-OTP-support.patch192
-rw-r--r--target/linux/ar71xx/patches-4.14/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch31
-rw-r--r--target/linux/ar71xx/patches-4.14/525-MIPS-ath79-enable-qca-usb-quirks.patch101
-rw-r--r--target/linux/ar71xx/patches-4.14/601-MIPS-ath79-add-more-register-defines.patch455
-rw-r--r--target/linux/ar71xx/patches-4.14/602-MIPS-ath79-add-openwrt-stuff.patch49
-rw-r--r--target/linux/ar71xx/patches-4.14/603-MIPS-ath79-ap121-fixes.patch149
-rw-r--r--target/linux/ar71xx/patches-4.14/604-MIPS-ath79-no-of.patch70
-rw-r--r--target/linux/ar71xx/patches-4.14/605-MIPS-ath79-db120-fixes.patch204
-rw-r--r--target/linux/ar71xx/patches-4.14/606-MIPS-ath79-pb44-fixes.patch144
-rw-r--r--target/linux/ar71xx/patches-4.14/607-MIPS-ath79-ubnt-xm-fixes.patch14
-rw-r--r--target/linux/ar71xx/patches-4.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch20
-rw-r--r--target/linux/ar71xx/patches-4.14/609-MIPS-ath79-ap136-fixes.patch300
-rw-r--r--target/linux/ar71xx/patches-4.14/611-MIPS-ath79-wdt-timeout.patch25
-rw-r--r--target/linux/ar71xx/patches-4.14/612-MIPS-ath79-set-buffalo-txgain.patch24
-rw-r--r--target/linux/ar71xx/patches-4.14/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch76
-rw-r--r--target/linux/ar71xx/patches-4.14/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch696
-rw-r--r--target/linux/ar71xx/patches-4.14/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch717
-rw-r--r--target/linux/ar71xx/patches-4.14/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch38
-rw-r--r--target/linux/ar71xx/patches-4.14/630-MIPS-ath79-fix-chained-irq-disable.patch106
-rw-r--r--target/linux/ar71xx/patches-4.14/631-MIPS-ath79-wmac-enable-set-led-pin.patch24
-rw-r--r--target/linux/ar71xx/patches-4.14/632-MIPS-ath79-gpio-enable-set-direction.patch32
-rw-r--r--target/linux/ar71xx/patches-4.14/640-MIPS-ath79-add-QCA955x-wmac-reset.patch82
-rw-r--r--target/linux/ar71xx/patches-4.14/700-MIPS-ath79-add-openwrt-Kconfig.patch11
-rw-r--r--target/linux/ar71xx/patches-4.14/701-MIPS-ath79-add-routerboard-detection.patch35
-rw-r--r--target/linux/ar71xx/patches-4.14/702-MIPS-ath79-fixup-routerboot-board-parameter.patch43
-rw-r--r--target/linux/ar71xx/patches-4.14/739-MIPS-ath79-add-gpio-func-register-for-QCA955x-SoC.patch38
-rw-r--r--target/linux/ar71xx/patches-4.14/740-MIPS-ath79-add-PCI-for-QCA953x-SoC.patch44
-rw-r--r--target/linux/ar71xx/patches-4.14/741-MIPS-ath79-add-PCI-for-QCA9556-SoC.patch12
-rw-r--r--target/linux/ar71xx/patches-4.14/818-MIPS-ath79-add-nu801-led-driver.patch26
-rw-r--r--target/linux/ar71xx/patches-4.14/820-MIPS-ath79-add_gpio_function2_setup.patch67
-rw-r--r--target/linux/ar71xx/patches-4.14/821-serial-core-add-support-for-boot-console-with-arbitr.patch54
-rw-r--r--target/linux/ar71xx/patches-4.14/900-mdio_bitbang_ignore_ta_value.patch32
-rw-r--r--target/linux/ar71xx/patches-4.14/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch61
-rw-r--r--target/linux/ar71xx/patches-4.14/902-at803x-add-reset-gpio-pdata.patch68
-rw-r--r--target/linux/ar71xx/patches-4.14/903-at803x-add-sgmii-aneg-override-pdata.patch38
-rw-r--r--target/linux/ar71xx/patches-4.14/910-unaligned_access_hacks.patch942
-rw-r--r--target/linux/ar71xx/patches-4.14/920-usb-chipidea-AR933x-platform-support.patch124
-rw-r--r--target/linux/ar71xx/patches-4.14/921-MIPS-ath79-add-even-more-register-defines-for-QCA956x-SoC.patch194
-rw-r--r--target/linux/ar71xx/patches-4.14/930-chipidea-pullup.patch72
-rw-r--r--target/linux/ar71xx/patches-4.14/940-qca955x-add-more-registers.patch42
-rw-r--r--target/linux/ar71xx/patches-4.14/950-add-boardinfo-platform-data.patch67
-rw-r--r--target/linux/ar71xx/patches-4.14/952-qca955x-enable-ddr-wb-flush.patch49
-rw-r--r--target/linux/ar71xx/patches-4.14/953-qca955x-pci-reset-fixes.patch120
-rw-r--r--target/linux/ar71xx/patches-4.14/955-qca953x-fix-potential-missing-irq-dispatch.patch27
-rw-r--r--target/linux/ar71xx/tiny/config-default76
-rw-r--r--target/linux/ar71xx/tiny/profiles/00-default.mk11
-rw-r--r--target/linux/ar71xx/tiny/target.mk10
448 files changed, 0 insertions, 80672 deletions
diff --git a/target/linux/ar71xx/Makefile b/target/linux/ar71xx/Makefile
deleted file mode 100644
index aa53b49735..0000000000
--- a/target/linux/ar71xx/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# Copyright (C) 2008-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=mips
-BOARD:=ar71xx
-BOARDNAME:=Atheros AR7xxx/AR9xxx
-FEATURES:=usbgadget source-only
-CPU_TYPE:=24kc
-SUBTARGETS:=generic tiny nand mikrotik
-
-KERNEL_PATCHVER:=4.14
-
-include $(INCLUDE_DIR)/target.mk
-
-DEFAULT_PACKAGES += \
- kmod-gpio-button-hotplug swconfig \
- kmod-ath9k uboot-envtools
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
deleted file mode 100755
index 54727a6e52..0000000000
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ /dev/null
@@ -1,1130 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2011 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-a40)
- ucidef_set_led_default "status-red" "Status (red)" "a40:red:status" "0"
- ucidef_set_led_default "status-blue" "Status (blue)" "a40:blue:status" "0"
- ;;
-a60)
- ucidef_set_led_default "status-red" "Status (red)" "a60:red:status" "0"
- ucidef_set_led_default "status-blue" "Status (blue)" "a60:blue:status" "0"
- ;;
-airgateway|\
-airgatewaypro)
- ucidef_set_led_wlan "wlan" "WLAN" "ubnt:blue:wlan" "phy0tpt"
- ;;
-alfa-nx)
- ucidef_set_led_netdev "wan" "WAN" "alfa:green:led_2" "eth0"
- ucidef_set_led_netdev "lan" "LAN" "alfa:green:led_3" "eth1"
- ;;
-all0258n|\
-all0315n)
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:red:rssilow" "wlan0" "1" "40" "0" "6"
- ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$board:yellow:rssimedium" "wlan0" "30" "80" "-29" "5"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:rssihigh" "wlan0" "70" "100" "-69" "8"
- ;;
-antminer-s1|\
-antminer-s3)
- ucidef_set_led_default "sys" "SYS" "$board:green:sys" "0"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
-
- case "$board" in
- antminer-s3)
- ucidef_set_led_default "lan" "LAN" "$board:yellow:lan" "0"
- ;;
- esac
- ;;
-antrouter-r1)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- ucidef_set_led_default "btc" "BTC" "$board:green:btc" "0"
- ;;
-ap121f)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- ;;
-ap147-010)
- ucidef_set_led_netdev "wan" "WAN" "ap147:green:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "ap147:green:lan1" "switch0" "0x10"
- ucidef_set_led_switch "lan2" "LAN2" "ap147:green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "ap147:green:lan3" "switch0" "0x04"
- ucidef_set_led_switch "lan4" "LAN4" "ap147:green:lan4" "switch0" "0x02"
- ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
- ;;
-ap90q|\
-cpe505n|\
-cpe830|\
-cpe870|\
-dr531|\
-e600g-v2|\
-e600gac-v2|\
-e750a-v4)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
- ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
-
- case "$board" in
- ap90q)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- ;;
- cpe505n)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
- ;;
- cpe830|\
- cpe870)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:link1" "wlan0" "1" "100" "0" "13"
- ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$board:green:link2" "wlan0" "26" "100" "-25" "13"
- ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$board:green:link3" "wlan0" "51" "100" "-50" "13"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:link4" "wlan0" "76" "100" "-75" "13"
- ;;
- esac
- ;;
-ap531b0|\
-gl-usb150|\
-sc1750|\
-sc450)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- ;;
-ap91-5g|\
-n5q)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "signal1" "SIGNAL1" "$board:red:signal1" "wlan0" "1" "100"
- ucidef_set_led_rssi "signal2" "SIGNAL2" "$board:orange:signal2" "wlan0" "25" "100"
- ucidef_set_led_rssi "signal3" "SIGNAL3" "$board:green:signal3" "wlan0" "50" "100"
- ucidef_set_led_rssi "signal4" "SIGNAL4" "$board:green:signal4" "wlan0" "75" "100"
-
- case "$board" in
- n5q)
- ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- ;;
- esac
- ;;
-archer-c25-v1)
- ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
- ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10"
- ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
- ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
- ;;
-archer-c5|\
-archer-c7)
- ucidef_set_led_usbport "usb1" "USB1" "tp-link:green:usb1" "usb1-port1"
- ucidef_set_led_usbport "usb2" "USB2" "tp-link:green:usb2" "usb2-port1"
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy1tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:green:wlan5g" "phy0tpt"
- ;;
-archer-c58-v1|\
-archer-c59-v1|\
-archer-c59-v2|\
-archer-c60-v1|\
-archer-c60-v2)
- ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
- ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
-
- case "$board" in
- archer-c59-v1|\
- archer-c59-v2)
- ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1"
- ;;
- esac
- ;;
-archer-c7-v4|\
-archer-c7-v5)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
- ucidef_set_led_switch "wan" "WAN" "$board:green:wan" "switch0" "0x02"
- ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan4" "switch0" "0x04"
- ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan3" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan2" "switch0" "0x10"
- ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan1" "switch0" "0x20"
-
- case "$board" in
- archer-c7-v4)
- ucidef_set_led_usbport "usb1" "USB1" "$board:green:usb1" "usb1-port1"
- ucidef_set_led_usbport "usb2" "USB2" "$board:green:usb2" "usb2-port1"
- ;;
- esac
-
- case "$board" in
- archer-c7-v5)
- ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1"
- ;;
- esac
- ;;
-arduino-yun)
- ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
- ucidef_set_led_usbport "usb" "USB" "arduino:white:usb" "1-1-port1"
- ;;
-bhr-4grv2)
- ucidef_set_led_default "power" "POWER" "buffalo:green:power" "1"
- ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
- ;;
-bsb)
- ucidef_set_led_default "sys" "SYS" "$board:red:sys" "1"
- ;;
-bullet-m|\
-bullet-m-xw|\
-loco-m-xw|\
-nanostation-m|\
-nanostation-m-xw|\
-rocket-m|\
-rocket-m-xw)
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:red:link1" "wlan0" "1" "100"
- ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:orange:link2" "wlan0" "26" "100"
- ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link3" "wlan0" "51" "100"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link4" "wlan0" "76" "100"
- ;;
-bxu2000n-2-a1)
- ucidef_set_led_wlan "wlan" "WLAN" "bhu:green:wlan" "phy0tpt"
- ;;
-cap324)
- ucidef_set_led_netdev "lan" "LAN" "pcs:green:lan" "eth0"
- ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "pcs:amber:wlan" "phy0tpt"
- ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "pcs:green:wlan" "phy1tpt"
- ;;
-c-55)
- ucidef_set_led_netdev "lan_green" "LAN_GREEN" "$board:green:lan" "eth0"
- ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "$board:amber:wlan" "phy0tpt"
- ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "$board:green:wlan" "phy1tpt"
- ;;
-c-60)
- ucidef_set_led_wlan "wlan1_green" "WLAN1_GREEN" "$board:green:wlan1" "phy0tpt"
- ucidef_set_led_wlan "wlan2_green" "WLAN2_GREEN" "$board:green:wlan2" "phy1tpt"
- ;;
-cap4200ag)
- ucidef_set_led_default "lan_green" "LAN_GREEN" "senao:green:lan" "1"
- ucidef_set_led_wlan "wlan_amber" "WLAN_AMBER" "senao:amber:wlan" "phy0tpt"
- ucidef_set_led_wlan "wlan_green" "WLAN_GREEN" "senao:green:wlan" "phy1tpt"
- ;;
-carambola2)
- ucidef_set_led_netdev "lan" "LAN" "$board:orange:eth0" "eth0"
- ucidef_set_led_netdev "wan" "WAN" "$board:orange:eth1" "eth1"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- ;;
-cf-e316n-v2)
- ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0"
- ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
- ;;
-cf-e320n-v2)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
- ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
- ;;
-cf-e355ac-v1|\
-cf-e355ac-v2|\
-cf-e375ac|\
-cf-e380ac-v1|\
-cf-e380ac-v2|\
-cf-e385ac)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:red:wlan5g" "phy0tpt"
-
- case "$board" in
- cf-e375ac|\
- cf-e385ac)
- ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x04"
- ;;
- *)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
- ;;
- esac
- ;;
-cf-e520n|\
-cf-e530n)
- ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
- ;;
-cpe210|\
-cpe210-v2|\
-cpe210-v3|\
-cpe510|\
-cpe510-v2|\
-wbs210|\
-wbs510)
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:link1" "wlan0" "1" "100" "0" "13"
- ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:link2" "wlan0" "26" "100" "-25" "13"
- ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:link3" "wlan0" "51" "100" "-50" "13"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13"
-
- case "$board" in
- cpe210-v2|\
- cpe210-v3|\
- cpe510-v2)
- ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan0" "eth0"
- ;;
- *)
- ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20"
- ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
- ;;
- esac
- ;;
-cr3000)
- ucidef_set_led_netdev "wan" "WAN" "pcs:blue:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "pcs:blue:lan1" "switch0" "0x04"
- ucidef_set_led_switch "lan2" "LAN2" "pcs:blue:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "pcs:blue:lan3" "switch0" "0x10"
- ucidef_set_led_switch "lan4" "LAN4" "pcs:blue:lan4" "switch0" "0x02"
- ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt"
- ;;
-cr5000)
- ucidef_set_led_wlan "wlan" "WLAN" "pcs:blue:wlan" "phy0tpt"
- ucidef_set_led_usbport "usb" "USB" "pcs:white:wps" "usb1-port1"
- ;;
-db120)
- ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1"
- ;;
-dr344)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
- ;;
-dragino2)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
- ucidef_set_led_netdev "lan" "LAN" "$board:red:lan" "eth0"
- ucidef_set_led_netdev "wan" "WAN" "$board:red:wan" "eth1"
- ;;
-dw33d)
- ucidef_set_led_usbport "mmc" "MMC" "$board:blue:mmc" "usb1-port1"
- ucidef_set_led_usbport "usb" "USB" "$board:blue:usb" "usb2-port1"
- ucidef_set_led_netdev "internet" "INTERNET" "$board:blue:internet" "eth0"
- ucidef_set_led_wlan "wlan2g" "WLAN-2.4G" "$board:blue:wlan-2g" "phy1tpt"
- ;;
-eap300v2)
- ucidef_set_led_netdev "lan" "LAN" "engenius:blue:lan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "engenius:blue:wlan" "phy0tpt"
- ;;
-ens202ext)
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "engenius:amber:wlan1" "wlan0" "1" "100" "0" "13"
- ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "engenius:red:wlan2" "wlan0" "25" "100" "-39" "13"
- ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "engenius:amber:wlan3" "wlan0" "50" "100" "-59" "13"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "engenius:green:wlan4" "wlan0" "75" "100" "-79" "13"
- ;;
-f9k1115v2)
- ucidef_set_led_usbport "usb2" "USB2" "belkin:green:usb2" "usb1-port1"
- ;;
-fritz300e)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:rssi0" "wlan0" "1" "100"
- ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$board:green:rssi1" "wlan0" "20" "100"
- ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$board:green:rssi2" "wlan0" "40" "100"
- ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$board:green:rssi3" "wlan0" "60" "100"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:rssi4" "wlan0" "80" "100"
- ;;
-dap-1330-a1)
- ucidef_set_rssimon "wlan0" "2000000" "2"
- ucidef_set_led_rssi "wifi-low" "wifi-low" "d-link:red:wifi" "wlan0" "1" "29"
- ucidef_set_led_rssi "wifi-medium" "wifi-medium" "d-link:green:wifi" "wlan0" "30" "100"
- ucidef_set_led_rssi "wifi-high" "wifi-high" "d-link:green:signal1" "wlan0" "50" "100"
- ucidef_set_led_rssi "wifi-max" "wifi-max" "d-link:green:signal2" "wlan0" "70" "100"
- ;;
-dap-2695-a1)
- ucidef_set_led_default "power" "POWER" "d-link:green:power" "1"
- ucidef_set_led_default "diag" "DIAG" "d-link:red:power" "0"
- ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:green:wlan2g" "phy1tpt"
- ;;
-dhp-1565-a1)
- ucidef_set_led_switch "wan" "WAN" "d-link:green:planet" "switch0" "0x20"
- ;;
-dir-600-a1|\
-dir-615-e1|\
-dir-615-e4|\
-ebr-2310-c1)
- ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "d-link:green:lan1" "switch0" "0x02"
- ucidef_set_led_switch "lan2" "LAN2" "d-link:green:lan2" "switch0" "0x04"
- ucidef_set_led_switch "lan3" "LAN3" "d-link:green:lan3" "switch0" "0x08"
- ucidef_set_led_switch "lan4" "LAN4" "d-link:green:lan4" "switch0" "0x10"
- ;;
-dir-615-c1)
- ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth1"
- ucidef_set_led_wlan "wlan" "WLAN" "d-link:green:wlan" "phy0tpt"
- ;;
-dir-825-b1|\
-dir-825-c1)
- ucidef_set_led_usbport "usb" "USB" "d-link:blue:usb" "usb1-port1"
-
- case "$board" in
- dir-825-c1)
- ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "d-link:blue:wlan2g" "phy0tpt"
- ;;
- esac
- ;;
-dir-615-i1)
- ucidef_set_led_default "power" "POWER" "d-link:green:power" "1"
- ucidef_set_led_default "diag" "DIAG" "d-link:amber:power" "0"
- ucidef_set_led_default "wps" "WPS" "d-link:blue:wps" "0"
- ucidef_set_led_netdev "wan" "WAN" "d-link:green:wan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "d-link:green:wlan" "phy0tpt"
- ;;
-dlan-hotspot)
- ucidef_set_led_wlan "wlan" "WLAN" "devolo:green:wifi" "phy0tpt"
- ;;
-dlan-pro-500-wp)
- ucidef_set_led_default "power" "System Power" "devolo:green:status" "1"
- ucidef_set_led_netdev "lan" "Ethernet Activity" "devolo:green:eth" "br-lan"
- ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "devolo:green:wlan-2g" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "devolo:blue:wlan-5g" "none"
- ;;
-dlan-pro-1200-ac)
- ucidef_set_led_wlan "wlan" "WLAN" "devolo:status:wlan" "phy0radio"
- ucidef_set_led_gpio "plcw" "dLAN" "devolo:status:dlan" "17" "0"
- ucidef_set_led_gpio "plcr" "dLAN" "devolo:error:dlan" "16" "0"
- ;;
-e1700ac-v2)
- ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1"
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
- ;;
-e558-v2|\
-e750g-v8)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- ;;
-esr900)
- ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "engenius:blue:wlan-2g" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "engenius:blue:wlan-5g" "phy1tpt"
- ;;
-esr1750|\
-epg5000)
- ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan-2g" "phy1tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan-5g" "phy0tpt"
- ;;
-fritz4020)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
- ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- ;;
-fritz450e)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- ;;
-gl-ar300m)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
- ;;
-gl-ar750)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:white:wlan2g" "phy1tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:white:wlan5g" "phy0tpt"
- ;;
-gl-ar750s)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "$board:green:wlan5g" "phy0tpt"
- ;;
-gl-mifi)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
- ucidef_set_led_netdev "3gnet" "3GNET" "$board:green:net" "3g-wan"
- ;;
-gl-ar150)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:orange:wlan" "phy0tpt"
- ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
- ;;
-gl-ar300)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:wlan" "phy0tpt"
- ;;
-gl-domino|\
-sc300m|\
-wrt160nl)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
- ;;
-gl-inet)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth1"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
- ;;
-hiwifi-hc6361)
- ucidef_set_led_netdev "inet" "INET" "hiwifi:blue:internet" "eth1"
- ucidef_set_led_wlan "wlan" "WLAN" "hiwifi:blue:wlan-2p4" "phy0tpt"
- ;;
-hornet-ub|\
-hornet-ub-x2)
- ucidef_set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0"
- ucidef_set_led_netdev "wan" "WAN" "alfa:blue:wan" "eth1"
- ucidef_set_led_wlan "wlan" "WLAN" "alfa:blue:wlan" "phy0tpt"
- ucidef_set_led_usbport "usb" "USB" "alfa:blue:usb" "usb1-port1"
- ;;
-koala)
- ucidef_set_led_default "power" "POWER" "$board:green:power" "1"
- ucidef_set_led_wlan "wlan2g" "WLAN 2.4GHz" "$board:yellow:wlan2" "phy1tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN 5GHz" "$board:red:wlan58" "phy0tpt"
- ;;
-lan-turtle)
- ucidef_set_led_netdev "wan" "WAN" "$board:orange:system" "eth1"
- ;;
-lbe-m5)
- ucidef_set_led_netdev "lan" "LAN" "ubnt:green:lan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "ubnt:green:wlan" "phy0tpt"
- ;;
-mc-mac1200r)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "mercury:green:wlan2g" "phy1tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "mercury:green:wlan5g" "phy0tpt"
- ;;
-mr12|\
-mr16)
- ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
- ucidef_set_led_wlan "wlan1" "WLAN1" "$board:green:wifi1" "phy0assoc"
- ucidef_set_led_wlan "wlan2" "WLAN2" "$board:green:wifi2" "phy0assoc"
- ucidef_set_led_wlan "wlan3" "WLAN3" "$board:green:wifi3" "phy0assoc"
- ucidef_set_led_wlan "wlan4" "WLAN4" "$board:green:wifi4" "phy0tpt"
- ;;
-mr18)
- ucidef_set_led_netdev "wlan0" "WLAN0" "$board:blue:tricolor0" "wlan0"
- ;;
-mr600)
- ucidef_set_led_wlan "wlan58" "WLAN58" "$board:green:wlan58" "phy0tpt"
- ucidef_set_led_default "wps" "WPS" "mr600:blue:wps" "0"
- ;;
-mr600v2)
- ucidef_set_led_default "wlan24-red" "WLAN 2.4GHz (red)" "mr600:red:wlan24" "0"
- ucidef_set_led_default "wlan24-yellow" "WLAN 2.4GHz (yellow)" "mr600:yellow:wlan24" "0"
- ucidef_set_led_wlan "wlan24-green" "WLAN 4GHz (green)" "mr600:green:wlan24" "phy1tpt"
- ucidef_set_led_default "wlan5-red" "WLAN 5GHz (red)" "mr600:red:wlan58" "0"
- ucidef_set_led_default "wlan5-yellow" "WLAN 5GHz (yellow)" "mr600:yellow:wlan58" "0"
- ucidef_set_led_wlan "wlan5-green" "WLAN 5GHz (green)" "mr600:green:wlan58" "phy0tpt"
- ;;
-mr1750|\
-mr1750v2)
- ucidef_set_led_netdev "lan" "LAN" "mr1750:blue:wan" "eth0"
- ucidef_set_led_wlan "wlan58" "WLAN58" "mr1750:blue:wlan58" "phy0tpt"
- ucidef_set_led_wlan "wlan24" "WLAN24" "mr1750:blue:wlan24" "phy1tpt"
- ucidef_set_led_default "status-red" "Status (red)" "mr1750:red:wifi" "0"
- ucidef_set_led_default "status-green" "Status (green)" "mr1750:green:wifi" "0"
- ;;
-mr900|\
-mr900v2)
- ucidef_set_led_netdev "lan" "LAN" "mr900:blue:wan" "eth0"
- ucidef_set_led_wlan "wlan24" "WLAN24" "mr900:blue:wlan24" "phy0tpt"
- ucidef_set_led_wlan "wlan58" "WLAN58" "mr900:blue:wlan58" "phy1tpt"
- ucidef_set_led_default "status-red" "Status (red)" "mr900:red:wifi" "0"
- ucidef_set_led_default "status-green" "Status (green)" "mr900:green:wifi" "0"
- ;;
-mynet-n600)
- ucidef_set_led_netdev "wan" "WAN" "wd:blue:internet" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "wd:green:lan1" "switch0" "0x02"
- ucidef_set_led_switch "lan2" "LAN2" "wd:green:lan2" "switch0" "0x10"
- ucidef_set_led_switch "lan3" "LAN3" "wd:green:lan3" "switch0" "0x08"
- ucidef_set_led_switch "lan4" "LAN4" "wd:green:lan4" "switch0" "0x04"
- ;;
-mynet-rext)
- ucidef_set_led_netdev "lan" "LAN" "wd:blue:ethernet" "eth0"
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "wd:blue:quality1" "wlan0" "1" "40" "0" "6"
- ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "wd:blue:quality2" "wlan0" "30" "80" "-29" "5"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "wd:blue:quality3" "wlan0" "70" "100" "-69" "8"
- ucidef_set_led_wlan "wlan" "WLAN" "wd:blue:wireless" "phy0tpt"
- ;;
-mzk-w04u)
- ucidef_set_led_usbport "usb" "USB" "planex:green:usb" "usb1-port1"
- ;;
-mzk-w300nh)
- ucidef_set_led_wlan "wlan" "WLAN" "planex:green:wlan" "phy0tpt"
- ;;
-nbg460n_550n_550nh)
- ucidef_set_led_wlan "wlan" "WLAN" "nbg460n:green:wlan" "phy0tpt"
- ;;
-nbg6616)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wifi2g" "phy1tpt"
- ucidef_set_led_wlan "wlan5" "WLAN5" "$board:green:wifi5g" "phy0tpt"
- ucidef_set_led_usbport "usb1" "USB1" "$board:green:usb1" "usb1-port1"
- ucidef_set_led_usbport "usb2" "USB2" "$board:green:usb2" "usb2-port1"
- ;;
-nbg6716)
- ucidef_set_led_netdev "wan" "WAN" "$board:white:internet" "eth1"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:white:wifi2g" "phy1tpt"
- ucidef_set_led_wlan "wlan5" "WLAN5" "$board:white:wifi5g" "phy0tpt"
- ucidef_set_led_usbport "usb1" "USB1" "$board:white:usb1" "usb1-port1"
- ucidef_set_led_usbport "usb2" "USB2" "$board:white:usb2" "usb2-port1"
- ;;
-om2p|\
-om2p-hs|\
-om2p-hsv2|\
-om2p-hsv3|\
-om2p-hsv4|\
-om2p-lc|\
-om2pv2|\
-om2pv4)
- ucidef_set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0"
- ucidef_set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1"
- ucidef_set_led_default "wlan-red" "WLAN (red)" "om2p:red:wifi" "0"
- ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om2p:yellow:wifi" "0"
- ucidef_set_led_default "wlan-green" "WLAN (green)" "om2p:green:wifi" "0"
- ;;
-om5p|\
-om5p-an)
- ucidef_set_led_netdev "port1" "port1" "om5p:blue:wan" "eth0"
- ucidef_set_led_netdev "port2" "port2" "om5p:blue:lan" "eth1"
- ucidef_set_led_default "wlan-red" "WLAN (red)" "om5p:red:wifi" "0"
- ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5p:yellow:wifi" "0"
- ucidef_set_led_default "wlan-green" "WLAN (green)" "om5p:green:wifi" "0"
- ;;
-om5p-ac)
- ucidef_set_led_netdev "port1" "port1" "om5pac:blue:lan" "eth0"
- ucidef_set_led_netdev "port2" "port2" "om5pac:blue:wan" "eth1"
- ucidef_set_led_default "wlan-red" "WLAN (red)" "om5pac:red:wifi" "0"
- ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5pac:yellow:wifi" "0"
- ucidef_set_led_default "wlan-green" "WLAN (green)" "om5pac:green:wifi" "0"
- ;;
-om5p-acv2)
- ucidef_set_led_default "wlan-red" "WLAN (red)" "om5pac:red:wifi" "0"
- ucidef_set_led_default "wlan-yellow" "WLAN (yellow)" "om5pac:yellow:wifi" "0"
- ucidef_set_led_default "wlan-green" "WLAN (green)" "om5pac:green:wifi" "0"
- ;;
-omy-g1)
- ucidef_set_led_wlan "wlan" "WLAN" "omy:green:wlan" "phy0tpt"
- ucidef_set_led_netdev "wan" "WAN" "omy:green:wan" "eth0"
- ucidef_set_led_netdev "lan" "LAN" "omy:green:lan" "eth1"
- ;;
-omy-x1)
- ucidef_set_led_default "power" "POWER" "omy:green:power" "1"
- ucidef_set_led_default "wan" "WAN" "omy:green:wan" "eth0"
- ;;
-pqi-air-pen)
- ucidef_set_led_wlan "wlan" "WLAN" "pqi-air-pen:blue:wlan" "phy0tpt"
- ucidef_set_led_default "wps" "WPS" "pqi-air-pen:blue:wps" "0"
- ;;
-qihoo-c301)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "qihoo:red:status" "phy1tpt"
- ;;
-r36a)
- ucidef_set_led_netdev "lan" "LAN" "$board:blue:lan" "eth0"
- ucidef_set_led_usbport "usb" "USB" "$board:blue:usb" "usb1-port1"
- ucidef_set_led_netdev "wan" "WAN" "$board:blue:wan" "eth1"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt"
- ;;
-r602n|\
-t830|\
-zbt-we1526)
- ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10"
- ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
- ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
-
- case "$board" in
- t830)
- ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1"
- ;;
- esac
- ;;
-r6100)
- ucidef_set_led_netdev "wan" "WAN (green)" "netgear:green:wan" "eth0"
- ucidef_set_led_usbport "usb" "USB" "netgear:blue:usb" "usb1-port1"
- ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy1tpt"
- ;;
-rb-750)
- ucidef_set_led_default "act" "act" "rb750:green:act" "1"
- ucidef_set_led_netdev "port1" "port1" "rb750:green:port1" "eth1"
- ucidef_set_led_switch "port2" "port2" "rb750:green:port2" "switch0" "0x10"
- ucidef_set_led_switch "port3" "port3" "rb750:green:port3" "switch0" "0x08"
- ucidef_set_led_switch "port4" "port4" "rb750:green:port4" "switch0" "0x04"
- ucidef_set_led_switch "port5" "port5" "rb750:green:port5" "switch0" "0x02"
- ;;
-rb-750-r2|\
-rb-750p-pbr2|\
-rb-750up-r2)
- ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000"
- ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0"
- ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10"
- ucidef_set_led_switch "port3" "port2" "rb:green:port3" "switch0" "0x08"
- ucidef_set_led_switch "port4" "port3" "rb:green:port4" "switch0" "0x04"
- ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02"
- ;;
-rb-911-2hn|\
-rb-911-5hn)
- ucidef_set_led_netdev "eth" "ETH" "rb:green:eth" "eth0"
- ;;
-rb-931-2nd|\
-rb-941-2nd)
- ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000"
- ;;
-rb-951ui-2nd|\
-rb-952ui-5ac2nd)
- ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000"
- ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0"
- ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10"
- ucidef_set_led_switch "port3" "port2" "rb:green:port3" "switch0" "0x08"
- ucidef_set_led_switch "port4" "port3" "rb:green:port4" "switch0" "0x04"
- ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02"
- ucidef_set_led_wlan "wlan" "WLAN" "rb:blue:wlan" "phy0tpt"
- ;;
-rb-962uigs-5hact2hnt)
- ucidef_set_led_timer "user" "USER/SFP" "rb:green:user" "1000" "1000"
- ;;
-rb-2011il|\
-rb-2011ils|\
-rb-2011l|\
-rb-2011uas|\
-rb-2011uas-2hnd|\
-rb-2011uias|\
-rb-2011uias-2hnd|\
-rb-2011uias-2hnd-r2)
- ucidef_set_led_switch "eth6" "ETH6" "rb:green:eth6" "switch1" "0x20"
- ucidef_set_led_switch "eth7" "ETH7" "rb:green:eth7" "switch1" "0x10"
- ucidef_set_led_switch "eth8" "ETH8" "rb:green:eth8" "switch1" "0x08"
- ucidef_set_led_switch "eth9" "ETH9" "rb:green:eth9" "switch1" "0x04"
- ucidef_set_led_switch "eth10" "ETH10" "rb:green:eth10" "switch1" "0x02"
- ;;
-rb-lhg-5nd)
- ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0"
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "rb:green:rssi0" "wlan0" "1" "100" "0" "13"
- ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "rb:green:rssi1" "wlan0" "20" "100" "-19" "13"
- ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "rb:green:rssi2" "wlan0" "40" "100" "-39" "13"
- ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "rb:green:rssi3" "wlan0" "60" "100" "-59" "13"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "rb:green:rssi4" "wlan0" "80" "100" "-79" "13"
- ;;
-rb-map-2nd)
- ucidef_set_led_switch "eth1" "WAN" "rb:green:eth1" "switch0" "0x02"
- ucidef_set_led_switch "eth2" "LAN" "rb:green:eth2" "switch0" "0x04"
- ucidef_set_led_gpio "poe" "POE" "rb:red:poe_out" "14" "0"
- ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt"
- ;;
-rb-mapl-2nd)
- ucidef_set_led_default "power" "POWER" "rb:green:power" "1"
- ucidef_set_led_netdev "lan" "LAN" "rb:green:eth" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt"
- ;;
-rb-wap-2nd)
- ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000"
- ucidef_set_led_wlan "wlan" "WLAN" "rb:green:wlan" "phy0tpt"
- ;;
-rb-wapr-2nd)
- ucidef_set_led_wlan "wlan" "WLAN" "rb:green:user" "phy0tpt"
- ;;
-re355|\
-re450)
- ucidef_set_led_netdev "lan_data" "LAN Data" "$board:green:lan_data" "eth0" "tx rx"
- ucidef_set_led_netdev "lan_link" "LAN Link" "$board:green:lan_link" "eth0" "link"
- ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt"
- ;;
-rme-eg200)
- ucidef_set_led_netdev "wan" "WAN" "eg200:red:eth0" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "eg200:red:wlan" "phy0tpt"
- ucidef_set_led_oneshot "modbus" "Modbus" "eg200:red:modbus" "100" "33"
- ucidef_set_led_default "etactica" "etactica" "eg200:red:etactica" "ignore"
- ;;
-rocket-m-ti)
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssiverylow" "RSSIVERYLOW" "ubnt:green:link1" "wlan0" "1" "100"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "ubnt:green:link2" "wlan0" "18" "100"
- ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "ubnt:green:link3" "wlan0" "34" "100"
- ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "ubnt:green:link4" "wlan0" "51" "100"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "ubnt:green:link5" "wlan0" "67" "100"
- ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "ubnt:green:link6" "wlan0" "84" "100"
- ;;
-rut900)
- ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x10"
- ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x04"
- ;;
-smart-300)
- ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0"
- ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04"
- ucidef_set_led_switch "lan2" "LAN2" "nc-link:green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "nc-link:green:lan3" "switch0" "0x10"
- ucidef_set_led_switch "lan4" "LAN4" "nc-link:green:lan4" "switch0" "0x02"
- ucidef_set_led_wlan "wlan" "WLAN" "nc-link:green:wlan" "phy0tpt"
- ;;
-som9331)
- ucidef_set_led_netdev "wan" "WAN" "$board:orange:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "$board:orange:lan1" "switch0" "0x08"
- ucidef_set_led_switch "lan2" "LAN2" "$board:orange:lan2" "switch0" "0x02"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:red:wlan" "phy0tpt"
- ucidef_set_led_usbport "usb" "USB" "$board:green:system" "usb1-port1"
- ;;
-sr3200)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
- ;;
-tellstick-znet-lite)
- ucidef_set_led_netdev "lan_act" "LANACT" "tellstick:green:lan" "eth0" "tx rx"
- ucidef_set_led_netdev "lan_link" "LANLINK" "tellstick:orange:lan" "eth0" "link"
- ;;
-tew-712br)
- ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "trendnet:green:lan1" "switch0" "0x02"
- ucidef_set_led_switch "lan2" "LAN2" "trendnet:green:lan2" "switch0" "0x04"
- ucidef_set_led_switch "lan3" "LAN3" "trendnet:green:lan3" "switch0" "0x08"
- ucidef_set_led_switch "lan4" "LAN4" "trendnet:green:lan4" "switch0" "0x10"
- ucidef_set_led_wlan "wlan" "WLAN" "trendnet:green:wlan" "phy0tpt"
- ;;
-tew-732br)
- ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1"
- ;;
-tew-823dru)
- ucidef_set_led_netdev "wan" "WAN" "trendnet:green:planet" "eth0"
- ;;
-tl-mr11u|\
-tl-mr3020|\
-tl-mr3040|\
-tl-mr3040-v2)
- ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1"
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
- ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
- ;;
-tl-mr3220|\
-tl-mr3420)
- ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1"
- ;;
-tl-mr3220-v2|\
-tl-wr741nd-v4)
- ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
- ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
- ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
-
- case "$board" in
- tl-mr3220-v2)
- ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1"
- ;;
- esac
- ;;
-tl-mr3420-v2|\
-tl-wr841n-v8|\
-tl-wr842n-v2|\
-tl-wr941nd-v5)
- ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth0"
- ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x04"
- ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10"
- ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
-
- case "$board" in
- tl-mr3420-v2|\
- tl-wr842n-v2)
- ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1"
- ;;
- esac
- ;;
-tl-mr6400)
- ucidef_set_led_netdev "lan" "LAN" "tp-link:white:lan" "eth0"
- ucidef_set_led_netdev "wan" "WAN" "tp-link:white:wan" "eth1"
- ucidef_set_led_netdev "4g" "4G" "tp-link:white:4g" "usb0"
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:white:wlan" "phy0tpt"
- ;;
-tl-wa7210n-v2)
- ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:green:signal1" "wlan0" "1" "100" "0" "13"
- ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:green:signal2" "wlan0" "26" "100" "-25" "13"
- ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:green:signal3" "wlan0" "51" "100" "-50" "13"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:signal4" "wlan0" "76" "100" "-75" "13"
- ;;
-tl-wa750re)
- ucidef_set_led_netdev "lan" "LAN" "tp-link:orange:lan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:orange:wlan" "phy0tpt"
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:orange:signal1" "wlan0" "1" "100" "0" "13"
- ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:orange:signal2" "wlan0" "20" "100" "-19" "13"
- ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "tp-link:orange:signal3" "wlan0" "40" "100" "-39" "13"
- ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:orange:signal4" "wlan0" "60" "100" "-59" "13"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:orange:signal5" "wlan0" "80" "100" "-79" "13"
- ;;
-tl-wa801nd-v3)
- ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth1"
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
- ;;
-tl-wa850re|\
-tl-wa850re-v2)
- ucidef_set_led_netdev "lan" "LAN" "tp-link:blue:lan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt"
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "rssilow" "RSSILOW" "tp-link:blue:signal1" "wlan0" "1" "100" "0" "13"
- ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "tp-link:blue:signal2" "wlan0" "20" "100" "-19" "13"
- ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "tp-link:blue:signal3" "wlan0" "40" "100" "-39" "13"
- ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "tp-link:blue:signal4" "wlan0" "60" "100" "-59" "13"
- ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:blue:signal5" "wlan0" "80" "100" "-79" "13"
- ;;
-tl-wa701nd-v2|\
-tl-wa801nd-v2|\
-tl-wa830re-v2|\
-tl-wa860re|\
-tl-wa901nd-v3|\
-tl-wa901nd-v4|\
-tl-wa901nd-v5)
- ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
- ;;
-tl-wa901nd)
- ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0"
- ;;
-tl-wa901nd-v2|\
-tl-wr941nd|\
-tl-wr1041n-v2)
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
- ;;
-tl-wdr3320-v2)
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:green:wlan5g" "phy0tpt"
- ;;
-tl-wdr3500)
- ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1"
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy0tpt"
- ;;
-tl-wdr4300)
- ucidef_set_led_usbport "usb1" "USB1" "tp-link:green:usb1" "1-1-port1"
- ucidef_set_led_usbport "usb2" "USB2" "tp-link:green:usb2" "1-1-port2"
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt"
- ;;
-tl-wdr4900-v2)
- ucidef_set_led_usbport "usb1" "USB1" "tp-link:green:usb1" "usb1-port1"
- ucidef_set_led_usbport "usb2" "USB2" "tp-link:green:usb2" "usb2-port1"
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:blue:wlan2g" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy1tpt"
- ;;
-tl-wdr6500-v2|\
-tl-wr741nd)
- ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02"
- ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04"
- ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08"
- ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10"
- ;;
-tl-wpa8630)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
- ucidef_set_led_netdev "wlan" "WLAN" "$board:green:wlan" "wlan1"
- ucidef_set_led_netdev "wlan5" "WLAN5" "$board:green:wlan5" "wlan0"
- ;;
-tl-wr740n-v6|\
-tl-wr841n-v9|\
-tl-wr841n-v11|\
-tl-wr842n-v3)
- ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
- ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
- ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
-
- case "$board" in
- tl-wr842n-v3)
- ucidef_set_led_usbport "usb" "USB" "tp-link:green:3g" "usb1-port1"
- ;;
- esac
- ;;
-tl-wr802n-v1)
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt"
- ;;
-tl-wr802n-v2)
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:system" "phy0tpt"
- ;;
-tl-wr902ac-v1)
- ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
- ucidef_set_led_usbport "usb" "USB" "$board:green:usb" "usb1-port1"
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:green:wlan2g" "phy1tpt"
- ;;
-tl-wr940n-v4|\
-tl-wr941nd-v6)
- ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0"
- ucidef_set_led_switch "lan1" "LAN1" "tp-link:blue:lan1" "switch0" "0x10"
- ucidef_set_led_switch "lan2" "LAN2" "tp-link:blue:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "tp-link:blue:lan3" "switch0" "0x04"
- ucidef_set_led_switch "lan4" "LAN4" "tp-link:blue:lan4" "switch0" "0x02"
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:wlan" "phy0tpt"
- ;;
-tl-wr840n-v2|\
-tl-wr840n-v3)
- ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
- ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
- ;;
-tl-wr940n-v6)
- ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0"
- ;;
-tl-wr942n-v1)
- ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x04"
- ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x10"
- ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
- ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
- ucidef_set_led_usbport "usb1" "USB1" "$board:green:usb1" "1-1-port2"
- ucidef_set_led_usbport "usb2" "USB2" "$board:green:usb2" "1-1-port1"
- ;;
-tl-wr1043nd|\
-tl-wr1043nd-v2)
- ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1"
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
- ;;
-tl-wr1043n-v5|\
-tl-wr1043nd-v4)
- ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
- ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20"
- ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
- ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08"
- ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04"
- ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02"
-
- case "$board" in
- tl-wr1043nd-v4)
- ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1"
- ;;
- esac
- ;;
-tl-wr2543n)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "tp-link:green:wlan2g" "phy0tpt"
- ucidef_set_led_usbport "usb" "USB" "tp-link:green:usb" "usb1-port1"
- ;;
-tube2h)
- ucidef_set_led_netdev "lan" "LAN" "alfa:blue:lan" "eth0"
- ucidef_set_rssimon "wlan0" "200000" "1"
- ucidef_set_led_rssi "signal1" "SIGNAL1" "alfa:red:signal1" "wlan0" "1" "100" "0" "13"
- ucidef_set_led_rssi "signal2" "SIGNAL2" "alfa:orange:signal2" "wlan0" "26" "100" "-25" "13"
- ucidef_set_led_rssi "signal3" "SIGNAL3" "alfa:green:signal3" "wlan0" "51" "100" "-50" "13"
- ucidef_set_led_rssi "signal4" "SIGNAL4" "alfa:green:signal4" "wlan0" "76" "100" "-75" "13"
- ;;
-wam250)
- ucidef_set_led_netdev "lan" "LAN" "$board:white:lan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "$board:white:wlan" "phy0tpt"
- ;;
-wndap360)
- ucidef_set_led_power "power" "POWER GREEN" "netgear:green:power" "1"
- ;;
-wndr3700)
- ucidef_set_led_default "wan" "WAN LED (green)" "netgear:green:wan" "0"
- ucidef_set_led_usbport "usb" "USB" "netgear:green:usb" "usb1-port1"
- ;;
-wi2a-ac200i)
- ucidef_set_led_default "power" "Power (green)" "nokia:green:power" "1"
- ucidef_set_led_default "wan" "Ethernet LED (green)" "nokia:green:wan" "1"
- ucidef_set_led_wlan "wlan5g" "WLAN" "nokia:green:wlan-5g" "phy0tpt"
- ucidef_set_led_wlan "wlan2g" "WLAN" "nokia:green:wlan-2g" "phy1tpt"
- ;;
-wndr3700v4|\
-wndr4300)
- ucidef_set_led_switch "wan-amber" "WAN (amber)" "netgear:amber:wan" "switch0" "0x20"
- ucidef_set_led_usbport "usb" "USB" "netgear:green:usb" "usb1-port1"
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "netgear:green:wlan2g" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "netgear:blue:wlan5g" "phy1tpt"
- ;;
-whr-g301n|\
-whr-hp-g300n|\
-whr-hp-gn)
- ucidef_set_led_netdev "wan" "WAN" "buffalo:green:wan" "eth1"
- ucidef_set_led_switch "lan1" "LAN1" "buffalo:green:lan1" "switch0" "0x02"
- ucidef_set_led_switch "lan2" "LAN2" "buffalo:green:lan2" "switch0" "0x04"
- ucidef_set_led_switch "lan3" "LAN3" "buffalo:green:lan3" "switch0" "0x08"
- ucidef_set_led_switch "lan4" "LAN4" "buffalo:green:lan4" "switch0" "0x10"
- ;;
-wifi-pineapple-nano)
- ucidef_set_led_wlan "wlan0" "WLAN0" "$board:blue:system" "phy0tpt"
- ;;
-wlae-ag300n)
- ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0"
- ;;
-wnr1000-v2|\
-wnr2000-v3)
- ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
- ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
- ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"
- ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04"
- ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04"
- ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04"
- ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10" "0x04"
- ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" "0x02"
- ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" "0x02"
- ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" "0x02"
- ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" "0x02"
- ;;
-wnr2000-v4)
- ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
- ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0"
- ucidef_set_led_switch "lan1" "LAN1" "netgear:amber:lan1" "switch0" "0x02"
- ucidef_set_led_switch "lan2" "LAN2" "netgear:amber:lan2" "switch0" "0x04"
- ucidef_set_led_switch "lan3" "LAN3" "netgear:amber:lan3" "switch0" "0x08"
- ucidef_set_led_switch "lan4" "LAN4" "netgear:amber:lan4" "switch0" "0x10"
- ucidef_set_led_usbport "usb" "USB" "netgear:amber:status" "usb1-port1"
- ;;
-wnr2200)
- ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
- ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
- ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"
- ucidef_set_led_switch "lan1green" "LAN1 (green)" "netgear:green:lan1" "switch0" "0x02" "0x04"
- ucidef_set_led_switch "lan2green" "LAN2 (green)" "netgear:green:lan2" "switch0" "0x04" "0x04"
- ucidef_set_led_switch "lan3green" "LAN3 (green)" "netgear:green:lan3" "switch0" "0x08" "0x04"
- ucidef_set_led_switch "lan4green" "LAN4 (green)" "netgear:green:lan4" "switch0" "0x10" "0x04"
- ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02" "0x02"
- ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04" "0x02"
- ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08" "0x02"
- ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10" "0x02"
- ucidef_set_led_usbport "usb" "USB" "netgear:green:usb" "usb1-port1"
- ;;
-wnr612-v2)
- ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "netgear:green:wlan" "phy0tpt"
- ucidef_set_led_switch "lan1" "LAN1" "netgear:green:lan1" "switch0" "0x02" "0x0f"
- ucidef_set_led_switch "lan2" "LAN2" "netgear:green:lan2" "switch0" "0x04" "0x0f"
- ;;
-wpn824n)
- ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
- ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy0tpt"
- ucidef_set_led_switch "lan1amber" "LAN1 (amber)" "netgear:amber:lan1" "switch0" "0x02"
- ucidef_set_led_switch "lan2amber" "LAN2 (amber)" "netgear:amber:lan2" "switch0" "0x04"
- ucidef_set_led_switch "lan3amber" "LAN3 (amber)" "netgear:amber:lan3" "switch0" "0x08"
- ucidef_set_led_switch "lan4amber" "LAN4 (amber)" "netgear:amber:lan4" "switch0" "0x10"
- ucidef_set_led_default "lan1green" "LAN1 (green)" "netgear:green:lan1" "0"
- ucidef_set_led_default "lan2green" "LAN2 (green)" "netgear:green:lan2" "0"
- ucidef_set_led_default "lan3green" "LAN3 (green)" "netgear:green:lan3" "0"
- ucidef_set_led_default "lan4green" "LAN4 (green)" "netgear:green:lan4" "0"
- ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
- ucidef_set_led_default "wps1" "WPS1" "netgear:blue:wps1" "0"
- ucidef_set_led_default "wps2" "WPS2" "netgear:blue:wps2" "0"
- ucidef_set_led_default "status" "STATUS" "netgear:amber:status" "0"
- ucidef_set_led_default "test" "TEST" "netgear:amber:test" "0"
- ;;
-wzr-hp-ag300h)
- ucidef_set_led_default "diag" "DIAG" "buffalo:red:diag" "0"
- ucidef_set_led_netdev "router" "ROUTER" "buffalo:green:router" "eth1"
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "buffalo:amber:band2g" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "buffalo:amber:band5g" "phy1tpt"
- ucidef_set_led_usbport "usb" "USB" "buffalo:green:usb" "usb1-port1"
- ;;
-wzr-hp-g300nh)
- ucidef_set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt"
- ucidef_set_led_netdev "router" "Router" "buffalo:green:router" "eth1"
- ucidef_set_led_usbport "usb" "USB" "buffalo:blue:usb" "usb1-port1"
- ;;
-wzr-hp-g300nh2|\
-wzr-hp-g450h)
- ucidef_set_led_wlan "wlan" "Wireless" "buffalo:green:wireless" "phy0tpt"
- ;;
-xd3200)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "$board:blue:wlan2g" "phy1tpt"
- ;;
-z1)
- ucidef_set_led_netdev "wlan1" "WLAN1" "$board:blue:tricolor0" "wlan1"
- ;;
-zcn-1523h-2)
- ucidef_set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
- ;;
-zcn-1523h-5)
- ucidef_set_led_netdev "lan1" "lan1" "zcn-1523h:green:lan1" "eth0"
- ucidef_set_led_netdev "lan2" "lan2" "zcn-1523h:green:lan2" "eth1"
- ;;
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
deleted file mode 100755
index 1487ff58de..0000000000
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ /dev/null
@@ -1,711 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2011-2015 OpenWrt.org
-#
-
-. /lib/functions/system.sh
-. /lib/functions/uci-defaults.sh
-
-ar71xx_setup_interfaces()
-{
- local board="$1"
-
- case "$board" in
- airgatewaypro)
- ucidef_add_switch "switch0" \
- "0@eth0" "4:lan" "5:wan"
- ;;
- airrouter|\
- ap121|\
- ap121-mini|\
- ap96|\
- dir-600-a1|\
- dir-615-c1|\
- dir-615-e1|\
- dir-615-e4|\
- hiwifi-hc6361|\
- ja76pf|\
- mc-mac1200r|\
- minibox-v1|\
- mynet-n600|\
- oolite-v1|\
- oolite-v5.2|\
- oolite-v5.2-dev|\
- qihoo-c301|\
- r602n|\
- rb-750|\
- rb-751|\
- som9331|\
- t830|\
- tew-632brp|\
- tew-712br|\
- tew-732br|\
- tl-mr3220|\
- tl-mr3420|\
- tl-wdr3320-v2|\
- tl-wdr3500|\
- tl-wr740n-v6|\
- tl-wr840n-v2|\
- tl-wr840n-v3|\
- tl-wr841n-v11|\
- tl-wr841n-v9|\
- tl-wr842n-v3|\
- whr-g301n|\
- whr-hp-g300n|\
- whr-hp-gn|\
- wzr-hp-ag300h|\
- zbt-we1526)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
- ;;
- alfa-ap120c|\
- all0305|\
- antminer-s1|\
- antminer-s3|\
- antrouter-r1|\
- ap121f|\
- ap91-5g|\
- aw-nr580|\
- bullet-m|\
- bullet-m-xw|\
- c-55|\
- cap324|\
- cap4200ag|\
- cf-e380ac-v1|\
- cf-e380ac-v2|\
- cpe210-v2|\
- cpe210-v3|\
- cpe510-v2|\
- dr342|\
- eap120|\
- eap300v2|\
- eap7660d|\
- el-mini|\
- fritz300e|\
- fritz450e|\
- gl-usb150|\
- hiveap-121|\
- koala|\
- lbe-m5|\
- loco-m-xw|\
- mr12|\
- mr16|\
- mr1750|\
- mr1750v2|\
- mr18|\
- mr600|\
- mr600v2|\
- mr900|\
- mr900v2|\
- mynet-rext|\
- pqi-air-pen|\
- rb-411|\
- rb-411u|\
- rb-911-2hn|\
- rb-911-5hn|\
- rb-911g-2hpnd|\
- rb-911g-5hpacd|\
- rb-911g-5hpnd|\
- rb-912uag-2hpnd|\
- rb-912uag-5hpnd|\
- rb-921gs-5hpacd-r2|\
- rb-922uags-5hpacd|\
- rb-lhg-5nd|\
- rb-mapl-2nd|\
- rb-sxt2n|\
- rb-sxt-2nd-r3|\
- rb-sxt5n|\
- rb-wap-2nd|\
- rb-wapr-2nd|\
- rb-wapg-5hact2hnd|\
- re355|\
- re450|\
- rocket-m-xw|\
- sc300m |\
- tl-mr10u|\
- tl-mr11u|\
- tl-mr12u|\
- tl-mr13u|\
- tl-mr3020|\
- tl-mr3040|\
- tl-mr3040-v2|\
- tl-wa701nd-v2|\
- tl-wa7210n-v2|\
- tl-wa750re|\
- tl-wa801nd-v2|\
- tl-wa830re-v2|\
- tl-wa850re|\
- tl-wa850re-v2|\
- tl-wa855re-v1|\
- tl-wa901nd|\
- tl-wa901nd-v2|\
- tl-wa901nd-v3|\
- tl-wa901nd-v4|\
- tl-wa901nd-v5|\
- tl-wr703n|\
- tl-wr802n-v1|\
- tl-wr802n-v2|\
- tl-wr902ac-v1|\
- ts-d084|\
- tube2h|\
- unifi|\
- unifiac-lite|\
- wi2a-ac200i|\
- wifi-pineapple-nano|\
- wndap360|\
- wp543)
- ucidef_set_interface_lan "eth0"
- ;;
- a40|\
- a60|\
- alfa-ap96|\
- alfa-nx|\
- dr344|\
- gl-ar150|\
- gl-ar300m|\
- gl-domino|\
- gl-inet|\
- gl-mifi|\
- jwap003|\
- om2p-hsv4|\
- om2pv4|\
- pb42|\
- pb44|\
- rb-951ui-2hnd|\
- routerstation|\
- tl-wr710n|\
- tl-wr720n-v3|\
- tl-wr810n|\
- tl-wr810n-v2|\
- wpe72|\
- wrtnode2q)
- ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ;;
- all0258n|\
- all0315n|\
- dlan-hotspot|\
- dlan-pro-500-wp|\
- ja76pf2|\
- rocket-m-ti|\
- ubnt-unifi-outdoor)
- ucidef_set_interface_lan "eth0 eth1"
- ;;
- wzr-hp-g300nh2)
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "2:wan"
- ;;
- ap132|\
- ap136|\
- ap152|\
- rb-750gl|\
- rb-751g|\
- rb-951g-2hnd|\
- rb-962uigs-5hact2hnt|\
- wlr8100|\
- wzr-hp-g450h)
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
- ;;
- ap135-020|\
- ap136-020|\
- bhr-4grv2|\
- tew-823dru|\
- tl-wr1043nd-v2|\
- wzr-450hp2)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
- ucidef_add_switch "switch0" \
- "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
- ;;
- ap136-010|\
- ap147-010|\
- nbg6616|\
- nbg6716)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
- ;;
- ap143|\
- rb-433|\
- rb-433u)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "5@eth1"
- ;;
- archer-c5|\
- archer-c7|\
- tl-wdr4900-v2)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
- ucidef_add_switch "switch0" \
- "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
- ;;
- archer-c25-v1|\
- archer-c60-v1|\
- archer-c60-v2|\
- rb-750-r2|\
- rb-750p-pbr2|\
- rb-750up-r2|\
- rb-951ui-2nd|\
- rb-952ui-5ac2nd)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
- ;;
- archer-c58-v1|\
- archer-c59-v1|\
- archer-c59-v2|\
- fritz4020|\
- rb-450g)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
- ;;
- arduino-yun|\
- dir-505-a1|\
- tl-wa801nd-v3)
- ucidef_set_interface_lan "eth1"
- ;;
- bsb)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "1:lan" "3:lan"
- ;;
- c-60)
- ucidef_add_switch "switch0" \
- "0@eth0" "3:wan" "4:lan"
- ;;
- rme-eg200)
- ucidef_set_interface_lan "eth0" "dhcp"
- ;;
- cf-e375ac|\
- rb-map-2nd)
- ucidef_add_switch "switch0" \
- "0@eth0" "1:wan" "2:lan"
- ;;
- cf-e385ac)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan" "1:wan" "6@eth1"
- ;;
- cpe210|\
- cpe510|\
- wbs210|\
- wbs510)
- ucidef_add_switch "switch0" \
- "0@eth0" "5:lan" "4:wan"
- ;;
- cr3000)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
- ;;
- cr5000|\
- dgl-5500-a1|\
- dhp-1565-a1|\
- dir-825-c1|\
- dir-835-a1|\
- esr900|\
- mynet-n750|\
- sr3200)
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
- ;;
- tl-wr1043n-v5)
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
- ;;
- dap-2695-a1)
- ucidef_add_switch "switch0" "0@eth0" "2:lan" "3:wan" "6@eth1"
- ;;
- rb-931-2nd)
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan:3" "2:lan:2" "3:wan:1"
- ;;
- rb-941-2nd)
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:wan:1"
- ;;
- db120|\
- rb-2011il|\
- rb-2011ils|\
- rb-2011l|\
- rb-2011uas|\
- rb-2011uas-2hnd|\
- rb-2011uias|\
- rb-2011uias-2hnd|\
- rb-2011uias-2hnd-r2)
- case "$board" in
- rb-2011ils|\
- rb-2011uas*|\
- rb-2011uias|\
- rb-2011uias-2hnd|\
- rb-2011uias-2hnd-r2)
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan" "6:sfp"
- ;;
- *)
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
- ;;
- esac
-
- ucidef_add_switch "switch1" \
- "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan"
- ;;
- dir-615-i1|\
- omy-g1|\
- r6100|\
- smart-300|\
- tl-wdr6500-v2|\
- tl-wr940n-v4|\
- tl-wr940n-v6|\
- tl-wr941nd-v6|\
- wnr1000-v2|\
- wnr2000-v4|\
- wnr2200|\
- wnr612-v2|\
- wpn824n)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4"
- ;;
- tl-mr6400)
- ucidef_set_interfaces_lan_wan "eth0.1 eth1" "usb0"
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan" "2:lan" "3:lan"
- ;;
- dir-825-b1|\
- nbg460n_550n_550nh|\
- tew-673gru|\
- wzr-hp-g300nh)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
- ;;
- dlan-pro-1200-ac)
- ucidef_set_interface_lan "eth0"
- ucidef_add_switch "switch0" \
- "0u@eth0" "2:lan" "3:lan" "4:lan"
- ucidef_add_switch_attr "switch0" "enable" "false"
- ;;
- e1700ac-v2|\
- e750g-v8|\
- unifiac-pro|\
- xd3200)
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan" "3:wan"
- ;;
- e558-v2)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
- ucidef_add_switch "switch0" \
- "0@eth1" "4:lan" "5:lan" "6@eth0" "3:wan"
- ;;
- ebr-2310-c1)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4"
- ;;
- el-m150)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
- ucidef_add_switch "switch0" \
- "0:lan" "1:lan" "3@eth1"
- ;;
- dir-869-a1|\
- epg5000|\
- esr1750|\
- tl-wr1043nd-v4|\
- wndr3700v4|\
- wndr4300)
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
- ;;
- ew-balin)
- ucidef_set_interface "usb2" ifname "usb0" protocol "static"
- ucidef_add_switch "switch0" \
- "0@eth0" "5:lan:4" "4:lan:5" "3:wan"
- ;;
- ew-dorin)
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan" "2:lan" "3:wan"
- ;;
- ew-dorin-router)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan" "3:lan"
- ;;
- dw33d|\
- f9k1115v2)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
- ucidef_add_switch "switch0" \
- "2:lan" "3:lan" "4:lan" "5:lan" "6@eth1" "0@eth0" "1:wan"
- ;;
- gl-ar300|\
- wnr2000-v3)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
- ;;
- gl-ar750|\
- rb-435g)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "1:lan" "2:lan"
- ;;
- gl-ar750s)
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan:2" "3:lan:1" "1:wan"
- ;;
- jwap230)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan" "5:wan" "6@eth1"
- ;;
- nanostation-m-xw)
- ucidef_add_switch "switch0" \
- "0@eth0" "5:lan" "1:wan"
- ;;
- onion-omega)
- ucidef_set_interface_lan "wlan0"
- ;;
- rb-450)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
- ucidef_add_switch "switch0" \
- "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth1"
- ;;
- routerstation-pro)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
- ;;
- rb-493g)
- ucidef_set_interfaces_lan_wan "eth0.1 eth1.1" "eth1.2"
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
- ucidef_add_switch "switch1" \
- "0@eth1" "1:lan:4" "2:lan:1" "3:lan:3" "4:lan:2" "5:wan"
- ;;
- rut900)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
- ;;
- tellstick-znet-lite)
- ucidef_set_interface_wan "eth0"
- ucidef_set_interface "wlan" ifname "wlan0" protocol "dhcp"
- ;;
- tl-mr3420-v2|\
- tl-wr841n-v8|\
- tl-wr842n-v2|\
- tl-wr941nd-v5|\
- tl-wr942n-v1)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
- ucidef_add_switch "switch0" \
- "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
- ;;
- archer-c7-v4|\
- archer-c7-v5|\
- tl-wdr4300|\
- tl-wr1041n-v2)
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
- ;;
- tl-wpa8630)
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
- ;;
- tl-wr1043nd)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
- ;;
- tl-wr2543n)
- ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
- ;;
- tl-mr3220-v2|\
- tl-wr741nd-v4)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
- ;;
- tl-wr841n-v1|\
- tl-wr941nd)
- ucidef_set_interface "eth" ifname "eth0"
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
- ;;
- tl-wr741nd|\
- tl-wr841n-v7)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4"
- ;;
- uap-pro|\
- wpj342)
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan" "2:wan"
- ;;
- wndr3700|\
- wndr3700v2|\
- wndr3800|\
- wndr3800ch)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" \
- "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0"
-
- ucidef_add_switch_attr "switch0" "blinkrate" 2
- ucidef_add_switch_port_attr "switch0" 1 led 6
- ucidef_add_switch_port_attr "switch0" 2 led 9
- ucidef_add_switch_port_attr "switch0" 5 led 2
- ;;
- wpj344)
- ucidef_add_switch "switch0" \
- "0@eth0" "3:lan" "2:wan"
- ;;
- wpj558)
- ucidef_add_switch "switch0" \
- "5:lan" "1:wan" "6@eth0"
- ;;
- wpj563)
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan" "3:wan"
- ;;
- wrt160nl)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" \
- "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4@eth0"
- ;;
- wzr-hp-g450h)
- ucidef_add_switch "switch0" \
- "0@eth0" "2:lan:1 3:lan:2 4:lan:3 5:lan:4" "1:wan"
- ;;
- z1)
- ucidef_set_interfaces_lan_wan "eth0.1" "eth1"
- ucidef_add_switch "switch0" \
- "0@eth0" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4" "5:wan"
- ;;
- ens202ext)
- ucidef_set_interfaces_lan_wan "eth1.1" "eth1.2"
- ucidef_add_switch "switch0" \
- "0@eth1" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
- ;;
- *)
- ucidef_set_interfaces_lan_wan "eth0" "eth1"
- ;;
- esac
-}
-
-ar71xx_setup_macs()
-{
- local board="$1"
- local lan_mac=""
- local wan_mac=""
-
- case $board in
- archer-c7-v4)
- base_mac=$(mtd_get_mac_binary config 0x8)
- wan_mac=$(macaddr_add "$base_mac" 1)
- ;;
- archer-c7-v5)
- base_mac=$(mtd_get_mac_binary info 0x8)
- wan_mac=$(macaddr_add "$base_mac" 1)
- ;;
- dgl-5500-a1|\
- dir-825-c1)
- wan_mac=$(mtd_get_mac_ascii nvram "wan_mac")
- ;;
- dhp-1565-a1|\
- dir-835-a1|\
- wndr3700v4|\
- wndr4300)
- lan_mac=$(mtd_get_mac_binary caldata 0x0)
- wan_mac=$(mtd_get_mac_binary caldata 0x6)
- ;;
- dir-869-a1|\
- mynet-n750)
- wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
- ;;
- esr900)
- wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
- ;;
- fritz300e)
- lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
- ;;
- tl-wdr4300)
- base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
- wan_mac=$(macaddr_add "$base_mac" 1)
- ;;
- tl-wr1043n-v5|\
- tl-wr1043nd-v4)
- lan_mac=$(mtd_get_mac_binary product-info 0x8)
- wan_mac=$(macaddr_add "$lan_mac" 1)
- ;;
- wlr8100)
- lan_mac=$(mtd_get_mac_ascii u-boot-env "ethaddr")
- wan_mac=$(mtd_get_mac_ascii u-boot-env "wanaddr")
- ;;
- wpj344|\
- wpj558)
- wan_mac=$(mtd_get_mac_binary u-boot 0x2e018)
- ;;
- esac
-
- [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
- [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
-}
-
-ar71xx_setup_ar8xxx_switch()
-{
- local board="$1"
-
- case $board in
- ap147-010|\
- archer-c25-v1|\
- archer-c58-v1|\
- archer-c59-v1|\
- archer-c59-v2|\
- archer-c60-v1|\
- archer-c60-v2|\
- archer-c7-v4|\
- archer-c7-v5|\
- cf-e375ac|\
- cf-e385ac|\
- cr3000|\
- dhp-1565-a1|\
- mynet-n600|\
- rb-2011il|\
- rb-2011ils|\
- rb-2011l|\
- rb-2011uas|\
- rb-2011uas-2hnd|\
- rb-2011uias|\
- rb-2011uias-2hnd|\
- rb-2011uias-2hnd-r2|\
- rb-750|\
- rb-750p-pbr2|\
- rb-750-r2|\
- rb-750up-r2|\
- rb-951ui-2nd|\
- rb-952ui-5ac2nd|\
- rb-map-2nd|\
- tl-wr1043nd-v4|\
- tl-wr1043n-v5|\
- wndr3700v4|\
- wndr3700v4|\
- wndr4300|\
- wnr1000-v2|\
- wnr2000-v3|\
- wnr2200|\
- wnr612-v2|\
- wpn824n)
- ucidef_set_ar8xxx_switch_mib "switch0" 0 500
- ;;
- esac
-}
-
-board_config_update
-board=$(board_name)
-ar71xx_setup_interfaces $board
-ar71xx_setup_macs $board
-ar71xx_setup_ar8xxx_switch $board
-board_config_flush
-
-exit 0
diff --git a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches b/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches
deleted file mode 100755
index 3bb2f635a3..0000000000
--- a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches
+++ /dev/null
@@ -1,42 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2015 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-cpe210|\
-cpe510|\
-wbs210|\
-wbs510)
- ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
- ;;
-nanostation-m)
- ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "8"
- ;;
-nanostation-m-xw)
- ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "2"
- ;;
-rb-912uag-2hpnd|\
-rb-912uag-5hpnd)
- ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "61" "1"
- ;;
-rb-750up-r2|\
-rb-951ui-2nd|\
-rb-952ui-5ac2nd)
- ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "45" "1"
- ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14"
- ;;
-rb-750p-pbr2)
- ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14"
- ;;
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
deleted file mode 100644
index 1a92ad927d..0000000000
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ /dev/null
@@ -1,599 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2009-2013 OpenWrt.org
-
-. /lib/functions.sh
-. /lib/functions/leds.sh
-
-get_status_led() {
- local board=$(board_name)
-
- case $board in
- a40)
- status_led="a40:green:status"
- ;;
- a60)
- status_led="a60:green:status"
- ;;
- alfa-nx)
- status_led="alfa:green:led_8"
- ;;
- all0305)
- status_led="eap7660d:green:ds4"
- ;;
- antminer-s1|\
- antminer-s3|\
- antminer-r1|\
- e1700ac-v2|\
- e558-v2|\
- e600gac-v2|\
- e750a-v4|\
- e750g-v8|\
- eap120|\
- minibox-v1|\
- minibox-v3.2|\
- packet-squirrel|\
- som9331|\
- sr3200|\
- tl-wr802n-v2|\
- xd3200)
- status_led="$board:green:system"
- ;;
- ap121f)
- status_led="$board:green:vpn"
- ;;
- ap132|\
- ap531b0|\
- cpe505n|\
- db120|\
- dr342|\
- dr344|\
- rut900|\
- tew-632brp|\
- tl-wr942n-v1|\
- wpj344|\
- zbt-we1526)
- status_led="$board:green:status"
- ;;
- ap136-010|\
- ap136-020)
- status_led="ap136:green:status"
- ;;
- ap147-010)
- status_led="ap147:green:status"
- ;;
- ap135-020)
- status_led="ap135:green:status"
- ;;
- archer-c25-v1|\
- archer-c58-v1|\
- archer-c59-v1|\
- archer-c59-v2|\
- archer-c60-v1|\
- archer-c60-v2|\
- archer-c7-v4|\
- archer-c7-v5|\
- fritz300e|\
- fritz4020|\
- fritz450e|\
- gl-ar750s|\
- gl-usb150|\
- mr12|\
- mr16|\
- nbg6616|\
- sc1750|\
- sc450|\
- tl-wpa8630|\
- tl-wr902ac-v1)
- status_led="$board:green:power"
- ;;
- tl-mr10u|\
- tl-mr12u|\
- tl-mr13u|\
- tl-wdr4300|\
- tl-wdr4900-v2|\
- tl-wr703n|\
- tl-wr710n|\
- tl-wr720n-v3|\
- tl-wr802n-v1|\
- tl-wr810n|\
- tl-wr810n-v2|\
- tl-wr940n-v4|\
- tl-wr941nd-v6)
- status_led="tp-link:blue:system"
- ;;
- ap90q|\
- cpe830|\
- cpe870|\
- gl-ar300m|\
- gl-inet|\
- gl-mifi)
- status_led="$board:green:lan"
- ;;
- ap91-5g|\
- n5q)
- status_led="$board:green:signal4"
- ;;
- ap96)
- status_led="$board:green:led2"
- ;;
- aw-nr580)
- status_led="$board:green:ready"
- ;;
- bhr-4grv2|\
- wzr-hp-ag300h|\
- wzr-hp-g300nh2)
- status_led="buffalo:red:diag"
- ;;
- bsb)
- status_led="$board:red:sys"
- ;;
- bullet-m|\
- bullet-m-xw|\
- loco-m-xw|\
- nano-m|\
- nanostation-m|\
- nanostation-m-xw|\
- rocket-m|\
- rocket-m-xw)
- status_led="ubnt:green:link4"
- ;;
- bxu2000n-2-a1)
- status_led="bhu:green:status"
- ;;
- cap324)
- status_led="pcs:green:power"
- ;;
- c-55|\
- c-60)
- status_led="$board:green:pwr"
- ;;
- cap4200ag)
- status_led="senao:green:pwr"
- ;;
- cf-e316n-v2|\
- cf-e520n|\
- cf-e530n)
- status_led="$board:blue:wan"
- ;;
- cf-e320n-v2)
- status_led="$board:blue:wlan"
- ;;
- cf-e375ac|\
- cf-e380ac-v1|\
- cf-e380ac-v2|\
- cf-e385ac)
- status_led="$board:blue:wlan2g"
- ;;
- cpe510)
- status_led="tp-link:green:link4"
- ;;
- cr3000|\
- cr5000)
- status_led="pcs:amber:power"
- ;;
- dap-1330-a1|\
- dgl-5500-a1|\
- dhp-1565-a1|\
- dir-505-a1|\
- dir-600-a1|\
- dir-615-e1|\
- dir-615-i1|\
- dir-615-e4)
- status_led="d-link:green:power"
- ;;
- dir-615-c1)
- status_led="d-link:green:status"
- ;;
- dir-825-b1)
- status_led="d-link:orange:power"
- ;;
- dir-825-c1|\
- dir-835-a1)
- status_led="d-link:amber:power"
- ;;
- dir-869-a1)
- status_led="d-link:white:status"
- ;;
- dlan-hotspot)
- status_led="devolo:green:wifi"
- ;;
- dlan-pro-500-wp)
- status_led="devolo:green:wlan-2g"
- ;;
- dlan-pro-1200-ac)
- status_led="devolo:status:wlan"
- ;;
- dr531)
- status_led="$board:green:sig4"
- ;;
- dragino2|\
- oolite-v1)
- status_led="$board:red:system"
- ;;
- dw33d|\
- r36a)
- status_led="$board:blue:status"
- ;;
- e600g-v2|\
- oolite-v5.2-dev|\
- ts-d084|\
- wifi-pineapple-nano)
- status_led="$board:blue:system"
- ;;
- eap300v2)
- status_led="engenius:blue:power"
- ;;
- ens202ext|\
- esr900)
- status_led="engenius:amber:power"
- ;;
- eap7660d)
- status_led="$board:green:ds4"
- ;;
- el-m150|\
- el-mini)
- status_led="easylink:green:system"
- ;;
- ew-balin)
- status_led="balin:green:status"
- ;;
- ew-dorin|\
- ew-dorin-router)
- status_led="dorin:green:status"
- ;;
- f9k1115v2)
- status_led="belkin:blue:status"
- ;;
- epg5000|\
- esr1750)
- status_led="$board:amber:power"
- ;;
- gl-ar750|\
- hiveap-121|\
- nbg6716|\
- wam250)
- status_led="$board:white:power"
- ;;
- hiwifi-hc6361)
- status_led="hiwifi:blue:system"
- ;;
- hornet-ub|\
- hornet-ub-x2)
- status_led="alfa:blue:wps"
- ;;
- ja76pf|\
- ja76pf2)
- status_led="jjplus:green:led1"
- ;;
- jwap230)
- status_led="$board:green:led1"
- ;;
- koala)
- status_led="$board:blue:sys"
- ;;
- lan-turtle)
- status_led="$board:orange:system"
- ;;
- lbe-m5)
- status_led="ubnt:green:sys"
- ;;
- ls-sr71)
- status_led="ubnt:green:d22"
- ;;
- mc-mac1200r)
- status_led="mercury:green:system"
- ;;
- mr18|\
- z1)
- status_led="$board:green:tricolor0"
- ;;
- mr600)
- status_led="$board:orange:power"
- ;;
- mr600v2)
- status_led="mr600:blue:power"
- ;;
- mr1750|\
- mr1750v2)
- status_led="mr1750:blue:power"
- ;;
- mr900|\
- mr900v2)
- status_led="mr900:blue:power"
- ;;
- mynet-n600|\
- mynet-n750|\
- mynet-rext)
- status_led="wd:blue:power"
- ;;
- mzk-w04nu|\
- mzk-w300nh)
- status_led="planex:green:status"
- ;;
- nbg460n_550n_550nh)
- status_led="nbg460n:green:power"
- ;;
- om2p|\
- om2p-hs|\
- om2p-hsv2|\
- om2p-hsv3|\
- om2p-hsv4|\
- om2p-lc|\
- om2pv2|\
- om2pv4)
- status_led="om2p:blue:power"
- ;;
- om5p|\
- om5p-an)
- status_led="om5p:blue:power"
- ;;
- om5p-ac|\
- om5p-acv2)
- status_led="om5pac:blue:power"
- ;;
- omy-g1)
- status_led="omy:green:wlan"
- ;;
- omy-x1)
- status_led="omy:green:power"
- ;;
- onion-omega)
- status_led="onion:amber:system"
- ;;
- pb44)
- status_led="$board:amber:jump1"
- ;;
- r602n)
- status_led="$board:green:wan"
- ;;
- rb-2011il|\
- rb-2011ils|\
- rb-2011l|\
- rb-2011uas|\
- rb-2011uas-2hnd)
- status_led="rb:green:usr"
- ;;
- rb-411|\
- rb-411u|\
- rb-433|\
- rb-433u|\
- rb-450|\
- rb-450g|\
- rb-493)
- status_led="rb4xx:yellow:user"
- ;;
- rb-750)
- status_led="rb750:green:act"
- ;;
- rb-750-r2|\
- rb-750p-pbr2|\
- rb-750up-r2|\
- rb-911-2hn|\
- rb-911-5hn|\
- rb-911g-2hpnd|\
- rb-911g-5hpacd|\
- rb-911g-5hpnd|\
- rb-931-2nd|\
- rb-941-2nd|\
- rb-951ui-2nd|\
- rb-952ui-5ac2nd|\
- rb-962uigs-5hact2hnt|\
- rb-lhg-5nd|\
- rb-map-2nd|\
- rb-mapl-2nd|\
- rb-sxt-2nd-r3|\
- rb-wap-2nd|\
- rb-wapr-2nd)
- status_led="rb:green:user"
- ;;
- rb-951ui-2hnd)
- status_led="rb:green:act"
- ;;
- rb-912uag-2hpnd|\
- rb-912uag-5hpnd|\
- rb-sxt2n|\
- rb-sxt5n|\
- rb-wapg-5hact2hnd)
- status_led="rb:green:power"
- ;;
- re355|\
- re450|\
- sc300m)
- status_led="$board:blue:power"
- ;;
- rocket-m-ti)
- status_led="ubnt:green:link6"
- ;;
- routerstation|\
- routerstation-pro)
- status_led="ubnt:green:rf"
- ;;
- rw2458n)
- status_led="$board:green:d3"
- ;;
- smart-300)
- status_led="nc-link:green:system"
- ;;
- qihoo-c301)
- status_led="qihoo:green:status"
- ;;
- t830)
- status_led="$board:green:usb"
- ;;
- tellstick-znet-lite)
- status_led="tellstick:white:system"
- ;;
- tew-673gru)
- status_led="trendnet:blue:wps"
- ;;
- tew-712br|\
- tew-732br|\
- tew-823dru)
- status_led="trendnet:green:power"
- ;;
- tl-mr3020|\
- tl-wr2543n)
- status_led="tp-link:green:wps"
- ;;
- tl-wa750re)
- status_led="tp-link:orange:re"
- ;;
- tl-wa850re|\
- tl-wa850re-v2)
- status_led="tp-link:blue:re"
- ;;
- tl-wa855re-v1|\
- tl-wa860re)
- status_led="tp-link:green:power"
- ;;
- tl-mr6400)
- status_led="tp-link:white:power"
- ;;
- archer-c5|\
- archer-c7|\
- tl-mr3220|\
- tl-mr3220-v2|\
- tl-mr3420|\
- tl-mr3420-v2|\
- tl-wa701nd-v2|\
- tl-wa801nd-v2|\
- tl-wa801nd-v3|\
- tl-wa830re-v2|\
- tl-wa901nd|\
- tl-wa901nd-v2|\
- tl-wa901nd-v3|\
- tl-wa901nd-v4|\
- tl-wa901nd-v5|\
- tl-wdr3320-v2|\
- tl-wdr3500|\
- tl-wr1041n-v2|\
- tl-wr1043n-v5|\
- tl-wr1043nd|\
- tl-wr1043nd-v2|\
- tl-wr1043nd-v4|\
- tl-wr740n-v6|\
- tl-wr741nd|\
- tl-wr741nd-v4|\
- tl-wr840n-v2|\
- tl-wr840n-v3|\
- tl-wr841n-v1|\
- tl-wr841n-v7|\
- tl-wr841n-v8|\
- tl-wr841n-v11|\
- tl-wr842n-v2|\
- tl-wr842n-v3|\
- tl-wr941nd|\
- tl-wr941nd-v5)
- status_led="tp-link:green:system"
- ;;
- tl-wr841n-v9)
- status_led="tp-link:green:qss"
- ;;
- tl-wr940n-v6)
- status_led="tp-link:orange:diag"
- ;;
- tl-wdr6500-v2)
- status_led="tp-link:white:system"
- ;;
- tube2h)
- status_led="alfa:green:signal4"
- ;;
- unifi)
- status_led="ubnt:green:dome"
- ;;
- uap-pro|\
- unifiac-lite|\
- unifiac-pro)
- status_led="ubnt:white:dome"
- ;;
- unifi-outdoor-plus)
- status_led="ubnt:white:front"
- ;;
- airgateway|\
- airgatewaypro)
- status_led="ubnt:white:status"
- ;;
- wi2a-ac200i)
- status_led="nokia:green:ctrl"
- ;;
- whr-g301n|\
- whr-hp-g300n|\
- whr-hp-gn|\
- wzr-hp-g300nh)
- status_led="buffalo:green:router"
- ;;
- wlae-ag300n)
- status_led="buffalo:green:status"
- ;;
- r6100|\
- wndap360|\
- wndr3700|\
- wndr3700v4|\
- wndr4300|\
- wnr2000|\
- wnr2000-v3|\
- wnr2200|\
- wnr612-v2|\
- wnr1000-v2|\
- wpn824n)
- status_led="netgear:green:power"
- ;;
- wp543)
- status_led="$board:green:diag"
- ;;
- wpj342|\
- wpj531|\
- wpj558)
- status_led="$board:green:sig3"
- ;;
- wpj563)
- status_led="$board:green:sig1"
- ;;
- wrt160nl|\
- wrt400n)
- status_led="$board:blue:wps"
- ;;
- zcn-1523h-2|\
- zcn-1523h-5)
- status_led="zcn-1523h:amber:init"
- ;;
- wlr8100)
- status_led="sitecom:amber:status"
- ;;
- esac
-}
-
-set_state() {
- get_status_led
-
- case "$1" in
- preinit)
- status_led_blink_preinit
- ;;
- failsafe)
- status_led_blink_failsafe
- ;;
- preinit_regular)
- status_led_blink_preinit_regular
- ;;
- upgrade)
- status_led_blink_preinit_regular
- ;;
- done)
- status_led_on
- case $(board_name) in
- gl-ar300m|\
- gl-ar750)
- fw_printenv lc >/dev/null 2>&1 && fw_setenv "bootcount" 0
- ;;
- qihoo-c301)
- local n=$(fw_printenv activeregion | cut -d = -f 2)
- fw_setenv "image${n}trynum" 0
- ;;
- wi2a-ac200i)
- fw_setenv PKRstCnt 0
- ;;
- esac
- ;;
- esac
-}
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
deleted file mode 100644
index 8fe57c87cc..0000000000
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ /dev/null
@@ -1,178 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-ath9k_eeprom_die() {
- echo "ath9k eeprom: " "$*"
- exit 1
-}
-
-ath9k_eeprom_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local mtd
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath9k_eeprom_die "no mtd device found for partition $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath9k_eeprom_die "failed to extract from $mtd"
-}
-
-ath9k_ubi_eeprom_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local ubidev=$(nand_find_ubi $CI_UBIPART)
- local ubi
-
- ubi=$(nand_find_volume $ubidev $part)
- [ -n "$ubi" ] || \
- ath9k_eeprom_die "no UBI volume found for $part"
-
- dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath9k_eeprom_die "failed to extract from $ubi"
-}
-
-ath9k_eeprom_extract_reverse() {
- local part=$1
- local offset=$2
- local count=$(($3))
- local mtd
- local reversed
- local caldata
-
- mtd=$(find_mtd_chardev "$part")
- reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
-
- for byte in $reversed; do
- caldata="\x${byte}${caldata}"
- done
-
- printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
-}
-
-ath9k_patch_firmware_mac() {
- local mac=$1
-
- [ -z "$mac" ] && return
-
- macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=2 count=1
-}
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"soc_wmac.eeprom")
- case $board in
- c-55|\
- c-60)
- ath9k_eeprom_extract "art" 0x1000 0x800
- ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1)
- ;;
- fritz4020|\
- fritz450e)
- ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440
- ;;
- mr18)
- . /lib/upgrade/nand.sh
-
- if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800
- else
- ath9k_eeprom_extract "odm-caldata" 0x1000 0x800
- fi
- ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +1)
- ;;
- r6100 | \
- wndr3700v4 | \
- wndr4300)
- ath9k_eeprom_extract "caldata" 0x1000 0x800
- ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0x0)
- ;;
- rambutan)
- ath9k_eeprom_extract "art" 0x1000 0x800
- ;;
- wlr8100)
- ath9k_eeprom_extract "art" 0x1000 0x800
- ath9k_patch_firmware_mac $(mtd_get_mac_ascii u-boot-env "ethaddr")
- ;;
- z1)
- . /lib/upgrade/nand.sh
-
- if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 0x1000 0x800
- else
- ath9k_eeprom_extract "origcaldata" 0x1000 0x800
- fi
- ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2)
- ;;
- *)
- ath9k_eeprom_die "board $board is not supported yet"
- ;;
- esac
- ;;
-
-"pci_wmac0.eeprom")
- case $board in
- c-55)
- ath9k_eeprom_extract "art" 0x5000 0x800
- ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2)
- ;;
- fritz300e)
- ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440
- ;;
- mr18)
- . /lib/upgrade/nand.sh
-
- if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 0x5000 0x800
- else
- ath9k_eeprom_extract "odm-caldata" 0x5000 0x800
- fi
- ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +2)
- ;;
- wndr3700v4 | \
- wndr4300)
- ath9k_eeprom_extract "caldata" 0x5000 0x800
- ath9k_patch_firmware_mac $(mtd_get_mac_binary caldata 0xc)
- ;;
- z1)
- . /lib/upgrade/nand.sh
-
- if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 0x15000 0x1000
- else
- ath9k_eeprom_extract "origcaldata" 0x15000 0x1000
- fi
- ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3)
- ;;
- *)
- ath9k_eeprom_die "board $board is not supported yet"
- ;;
- esac
- ;;
-
-"pci_wmac1.eeprom")
- case $board in
- mr18)
- . /lib/upgrade/nand.sh
-
- if [ -n "$(nand_find_volume ubi0 caldata)" ]; then
- ath9k_ubi_eeprom_extract "caldata" 0x9000 0x800
- else
- ath9k_eeprom_extract "odm-caldata" 0x9000 0x800
- fi
- ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary_ubi board-config 0x66) +3)
- ;;
- *)
- ath9k_eeprom_die "board $board is not supported yet"
- ;;
- esac
- ;;
-esac
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
deleted file mode 100644
index c0e8f17d94..0000000000
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ /dev/null
@@ -1,195 +0,0 @@
-#!/bin/sh
-
-ath10kcal_die() {
- echo "ath10cal: " "$*"
- exit 1
-}
-
-ath10kcal_from_file() {
- local source=$1
- local offset=$(($2))
- local count=$(($3))
-
- dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $source"
-}
-
-ath10kcal_extract() {
- local part=$1
- local offset=$(($2))
- local count=$(($3))
- local mtd cal_size
-
- mtd=$(find_mtd_chardev $part)
- [ -n "$mtd" ] || \
- ath10kcal_die "no mtd device found for partition $part"
-
- # Check that the calibration data size in header equals the desired size
- cal_size=$(dd if=$mtd bs=2 count=1 skip=$(( $offset / 2 )) conv=swab 2>/dev/null | hexdump -ve '1/2 "%d"')
-
- [ "$count" = "$cal_size" ] || \
- ath10kcal_die "no calibration data found in $part"
-
- dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
- ath10kcal_die "failed to extract calibration data from $mtd"
-}
-
-ath10kcal_patch_mac() {
- local mac=$1
-
- [ -z "$mac" ] && return
-
- macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc oflag=seek_bytes bs=6 seek=6 count=1
-}
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath10k/cal-pci-0000:00:00.0.bin")
- case $board in
- a40|\
- a60|\
- mr1750|\
- mr1750v2|\
- om5p-acv2)
- ath10kcal_extract "ART" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
- ;;
- archer-c25-v1|\
- tl-wdr6500-v2)
- ath10kcal_extract "art" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
- ;;
- archer-c7-v4|\
- archer-c7-v5)
- ath10kcal_extract "art" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
- ;;
- cf-e355ac-v1|\
- cf-e380ac-v1|\
- cf-e380ac-v2|\
- dlan-pro-1200-ac|\
- e1700ac-v2|\
- e600gac-v2|\
- minibox-v3.2|\
- oolite-v5.2|\
- oolite-v5.2-dev|\
- sr3200|\
- xd3200)
- ath10kcal_extract "art" 0x5000 0x844
- ;;
- dap-2695-a1)
- ath10kcal_extract "radiocfg" 0x5000 0x844
- ath10kcal_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
- ;;
- dir-869-a1|\
- qihoo-c301)
- ath10kcal_extract "radiocfg" 0x5000 0x844
- ath10kcal_patch_mac $(mtd_get_mac_ascii devdata wlan5mac)
- ;;
- dw33d)
- ath10kcal_extract "art" 0x5000 0x844
- ath10kcal_patch_mac $(mtd_get_mac_binary art 0x12)
- ;;
- epg5000|\
- esr1750)
- ath10kcal_extract "caldata" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
- ;;
- gl-ar750s|\
- gl-ar750|\
- tl-wpa8630)
- ath10kcal_extract "art" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
- ;;
- koala)
- ath10kcal_extract "art" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0xc) +0)
- ;;
- mc-mac1200r)
- ath10kcal_extract "art" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
- ;;
- r6100)
- ath10kcal_extract "caldata" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) +2)
- ;;
- rb-952ui-5ac2nd|\
- rb-wapg-5hact2hnd)
- ath10kcal_from_file "/sys/firmware/mikrotik/hard_config/wlan_data" 0x5000 0x844
- ;;
- re355|\
- re450|\
- tl-wr902ac-v1)
- ath10kcal_extract "art" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
- ;;
- unifiac-lite|\
- unifiac-pro)
- ath10kcal_extract "EEPROM" 0x5000 0x844
- ;;
- wi2a-ac200i)
- ath10kcal_extract "ART" 0x5000 0x844
- ;;
- esac
- ;;
-"ath10k/cal-pci-0000:01:00.0.bin")
- case $board in
- archer-c5|\
- archer-c7)
- ath10kcal_extract "art" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
- ;;
- nbg6616|\
- nbg6716)
- ath10kcal_extract "RFdata" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
- ;;
- om5p-ac)
- ath10kcal_extract "ART" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
- ;;
- rb-911g-5hpacd|\
- rb-921gs-5hpacd-r2|\
- rb-922uags-5hpacd|\
- rb-962uigs-5hact2hnt)
- ath10kcal_from_file "/sys/firmware/mikrotik/hard_config/wlan_data" 0x5000 0x844
- ;;
- wlr8100)
- ath10kcal_extract "art" 0x5000 0x844
- ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1)
- ;;
- esac
- ;;
-"ath10k/pre-cal-pci-0000:00:00.0.bin")
- case $board in
- archer-c58-v1|\
- archer-c59-v1|\
- archer-c59-v2|\
- archer-c60-v1|\
- cf-e355ac-v2|\
- cf-e375ac)
- ath10kcal_extract "art" 0x5000 0x2f20
- ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
- /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
- ;;
- archer-c60-v2)
- ath10kcal_extract "art" 0x5000 0x2f20
- ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
- /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
- ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
- ;;
- cf-e385ac)
- ath10kcal_extract "art" 0x5000 0x2f20
- ;;
- esac
- ;;
-*)
- exit 1
- ;;
-esac
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
deleted file mode 100644
index 2a06b7d07b..0000000000
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ /dev/null
@@ -1,24 +0,0 @@
-#!/bin/ash
-
-[ "$ACTION" == "add" ] || exit 0
-
-PHYNBR=${DEVPATH##*/phy}
-
-[ -n $PHYNBR ] || exit 0
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-board=$(board_name)
-
-case "$board" in
- archer-c58-v1|\
- archer-c59-v1|\
- archer-c59-v2|\
- archer-c60-v1)
- echo $(macaddr_add $(mtd_get_mac_binary mac 0x8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
- ;;
- *)
- ;;
-esac
-
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix b/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix
deleted file mode 100644
index bd1abb9681..0000000000
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/net/10-ar922x-led-fix
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/sh
-
-# For AR9220 and AR9223, GPIO JTAG must explicit be disabled
-# before LEDs start working. Do this when wifi device is
-# detected.
-
-#
-# $DEVPATH is not valid for some boards (including WZR-HP-AG300H).
-# Manipulate the $DEVPATH to reach the corresponding phyN.
-#
-
-devdir=$(dirname $DEVPATH)
-devdir=$(dirname $devdir)
-phydir=/sys$devdir/ieee80211
-
-[ -d $phydir ] || exit 0
-
-phyname=$(cat $phydir/phy*/name)
-
-[ -z $phyname -o $ACTION != "add" ] && exit 0
-
-#
-# ar922x_disable_gpio_jtag():
-#
-# Emulate
-# REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
-# for AR9220 and AR9223.
-#
-
-ar922x_disable_gpio_jtag() {
- local regidx=0x4054
-
- [ -f /sys/kernel/debug/ieee80211/$1/ath9k/regidx ] || return
-
- echo $regidx > /sys/kernel/debug/ieee80211/$1/ath9k/regidx
- regval=$(cat /sys/kernel/debug/ieee80211/$1/ath9k/regval)
- regval=$((regval | 0x20000))
- echo regval $regval
- echo $regval > /sys/kernel/debug/ieee80211/$1/ath9k/regval
-}
-
-[ $phyname -a $ACTION = "add" ] && {
- . /lib/functions.sh
-
- case $(board_name) in
- wzr-hp-ag300h)
- ar922x_disable_gpio_jtag $phyname
- ;;
- esac;
-}
-
-exit 0
diff --git a/target/linux/ar71xx/base-files/etc/inittab b/target/linux/ar71xx/base-files/etc/inittab
deleted file mode 100644
index 9820e7144b..0000000000
--- a/target/linux/ar71xx/base-files/etc/inittab
+++ /dev/null
@@ -1,3 +0,0 @@
-::sysinit:/etc/init.d/rcS S boot
-::shutdown:/etc/init.d/rcS K shutdown
-::askconsole:/usr/libexec/login.sh
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
deleted file mode 100644
index 0388fb6dc9..0000000000
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
+++ /dev/null
@@ -1,108 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2013 OpenWrt.org
-#
-
-SWITCH_NAME_CHANGED=
-
-. /lib/functions.sh
-
-do_change_switch_name() {
- local config="$1"
- local option=$2
- local oldname=$3
- local newname=$4
- local val
-
- config_get val "$config" $option
- [ "$val" != "$oldname" ] && return 0
-
- uci_set network "$config" $option $newname
- SWITCH_NAME_CHANGED=1
-
- return 0
-}
-
-migrate_switch_name() {
- local oldname=$1
- local newname=$2
-
- config_load network
-
- logger -t migrate-switchX "Updating switch names in network configuration"
-
- config_foreach do_change_switch_name switch name $oldname $newname
- config_foreach do_change_switch_name switch_vlan device $oldname $newname
-
- [ "$SWITCH_NAME_CHANGED" = "1" ] && {
- logger -t migrate-switchX "Switch names updated, saving network configuration"
- uci commit network
- }
-}
-
-board=$(board_name)
-
-case "$board" in
-airrouter|\
-ap121|\
-ap121-mini|\
-ap96|\
-dir-600-a1|\
-dir-615-c1|\
-dir-615-e1|\
-dir-615-e4|\
-dir-825-c1|\
-ebr-2310-c1|\
-ew-dorin|\
-ew-dorin-router|\
-ja76pf|\
-rb-750|\
-rb-751|\
-tew-632brp|\
-tew-712br|\
-tl-mr3220|\
-tl-mr3220-v2 |\
-tl-mr3420|\
-tl-wdr4300|\
-tl-wr741nd|\
-tl-wr741nd-v4|\
-tl-wr841n-v7|\
-tl-wr1041n-v2|\
-whr-g301n|\
-whr-hp-g300n|\
-whr-hp-gn|\
-wrt160nl|\
-wzr-hp-ag300h|\
-wzr-hp-g300nh2|\
-wzr-hp-g450h|\
-z1)
- migrate_switch_name "eth0" "switch0"
- ;;
-
-el-m150|\
-rb-450)
- migrate_switch_name "eth1" "switch0"
- ;;
-
-db120|\
-rb-2011il|\
-rb-2011ils|\
-rb-2011l|\
-rb-2011uas-2hnd)
- migrate_switch_name "eth0" "switch0"
- migrate_switch_name "eth1" "switch1"
- ;;
-
-dir-825-b1|\
-nbg460n_550n_550nh|\
-tew-673gru)
- migrate_switch_name "rtl8366s" "switch0"
- ;;
-
-tl-wr1043nd)
- migrate_switch_name "rtl8366rb" "switch0"
- ;;
-
-esac
-
-exit 0
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-vlan-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-vlan-migration
deleted file mode 100644
index 259d240610..0000000000
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-vlan-migration
+++ /dev/null
@@ -1,13 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-
-dev="$(uci -q get network.@switch_vlan[0].device)"
-vlan="$(uci -q get network.@switch_vlan[0].vlan)"
-
-if [ "$dev" = "rtl8366s" ] && [ "$vlan" = 0 ]; then
- logger -t vlan-migration "VLAN 0 is invalid for RTL8366s, changing to 1"
- uci set network.@switch_vlan[0].vlan=1
- uci commit network
-fi
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration b/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration
deleted file mode 100644
index c244b3b460..0000000000
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration
+++ /dev/null
@@ -1,84 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2013 OpenWrt.org
-#
-
-LED_OPTIONS_CHANGED=0
-
-. /lib/functions.sh
-
-do_led_update_sysfs()
-{
- local cfg=$1; shift
- local tuples="$@"
- local sysfs
- local name
-
- config_get sysfs $cfg sysfs
- config_get name $cfg name
-
- [ -z "$sysfs" ] && return
-
- for tuple in $tuples; do
- local old=${tuple%=*}
- local new=${tuple#*=}
- local new_sysfs
-
- new_sysfs=$(echo ${sysfs} | sed "s/${old}/${new}/")
-
- [ "$new_sysfs" = "$sysfs" ] && continue
-
- uci set system.${cfg}.sysfs="${new_sysfs}"
- LED_OPTIONS_CHANGED=1
-
- logger -t led-migration "sysfs option of LED \"${name}\" updated to ${new_sysfs}"
- done;
-}
-
-migrate_leds()
-{
- config_load system
- config_foreach do_led_update_sysfs led "$@"
-}
-
-board=$(board_name)
-
-case "$board" in
-archer-c7)
- migrate_leds ":blue:=:green:"
- ;;
-dhp-1565-a1|\
-dir-825-c1|\
-dir-835-a1)
- migrate_leds ":orange:=:amber:" ":wifi_bgn=:wlan2g"
- ;;
-dr344)
- migrate_leds ":red:=:green:" ":yellow:=:green:"
- ;;
-gl-ar150)
- migrate_leds "gl-ar150:wlan=gl-ar150:orange:wlan" "gl-ar150:lan=gl-ar150:green:lan" "gl-ar150:wan=gl-ar150:green:wan"
- ;;
-oolite-v1)
- migrate_leds "oolite:=${board}"
- ;;
-wndap360|\
-wndr3700|\
-wnr2000|\
-wnr2200)
- migrate_leds "${board}:=netgear:"
- ;;
-wndr3700v4|\
-wndr4300)
- migrate_leds ":orange:=:amber:"
- ;;
-wnr1000-v2)
- migrate_leds "wnr1000v2:=netgear:"
- ;;
-wnr612-v2)
- migrate_leds "wnr612v2:=netgear:"
- ;;
-esac
-
-[ "$LED_OPTIONS_CHANGED" = "1" ] && uci commit system
-
-exit 0
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum b/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum
deleted file mode 100644
index 2d1afb11cb..0000000000
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-checksum
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-
-. /lib/functions.sh
-
-board=$(board_name)
-
-fixtrx() {
- mtd -o 32 fixtrx firmware
-}
-
-fixwrgg() {
- local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd)
-
- [ "$kernel_size" ] && mtd -c 0x$kernel_size fixwrgg firmware
-}
-
-case "$board" in
-mynet-rext |\
-wrt160nl)
- fixtrx
- ;;
-dap-2695-a1)
- fixwrgg
- ;;
-esac
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header b/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header
deleted file mode 100644
index b3857ef07f..0000000000
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/09_fix-seama-header
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-
-fix_seama_header() {
- local kernel_size=$(sed -n 's/mtd[0-9]*: \([0-9a-f]*\).*"kernel".*/\1/p' /proc/mtd)
-
- [ "$kernel_size" ] && mtd -c 0x$kernel_size fixseama firmware
-}
-
-board=$(board_name)
-
-case "$board" in
-dir-869-a1)
- fix_seama_header
- ;;
-esac
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
deleted file mode 100755
index 044ef4eae5..0000000000
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ /dev/null
@@ -1,1589 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2009-2011 OpenWrt.org
-#
-
-AR71XX_BOARD_NAME=
-AR71XX_MODEL=
-
-ar71xx_get_mtd_offset_size_format() {
- local mtd="$1"
- local offset="$2"
- local size="$3"
- local format="$4"
- local dev
-
- dev=$(find_mtd_part $mtd)
- [ -z "$dev" ] && return
-
- dd if=$dev iflag=skip_bytes bs=$size skip=$offset count=1 2>/dev/null | hexdump -v -e "1/1 \"$format\""
-}
-
-ar71xx_get_mtd_part_magic() {
- local mtd="$1"
- ar71xx_get_mtd_offset_size_format "$mtd" 0 4 %02x
-}
-
-wndr3700_board_detect() {
- local machine="$1"
- local magic
- local name
-
- name="wndr3700"
-
- magic="$(ar71xx_get_mtd_part_magic firmware)"
- case $magic in
- "33373030")
- machine="NETGEAR WNDR3700"
- ;;
- "33373031")
- model="$(ar71xx_get_mtd_offset_size_format art 41 32 %c)"
- # Use awk to remove everything unprintable
- model_stripped="$(ar71xx_get_mtd_offset_size_format art 41 32 %c | LC_CTYPE=C awk -v 'FS=[^[:print:]]' '{print $1; exit}')"
- case $model in
- $'\xff'*)
- if [ "${model:24:1}" = 'N' ]; then
- machine="NETGEAR WNDRMAC"
- else
- machine="NETGEAR WNDR3700v2"
- fi
- ;;
- '29763654+16+64'*)
- machine="NETGEAR ${model_stripped:14}"
- ;;
- '29763654+16+128'*)
- machine="NETGEAR ${model_stripped:15}"
- ;;
- *)
- # Unknown ID
- machine="NETGEAR ${model_stripped}"
- esac
- esac
-
- AR71XX_BOARD_NAME="$name"
- AR71XX_MODEL="$machine"
-}
-
-ubnt_get_mtd_part_magic() {
- ar71xx_get_mtd_offset_size_format EEPROM 4118 2 %02x
-}
-
-ubnt_xm_board_detect() {
- local model
- local magic
-
- magic="$(ubnt_get_mtd_part_magic)"
- case ${magic:0:3} in
- "e00"|\
- "e01"|\
- "e80")
- model="Ubiquiti NanoStation M"
- ;;
- "e0a")
- model="Ubiquiti NanoStation loco M"
- ;;
- "e1b"|\
- "e1d")
- model="Ubiquiti Rocket M"
- ;;
- "e20"|\
- "e2d")
- model="Ubiquiti Bullet M"
- ;;
- "e30")
- model="Ubiquiti PicoStation M"
- ;;
- esac
-
- [ -z "$model" ] || AR71XX_MODEL="${model}${magic:3:1}"
-}
-
-ubnt_unifi_ac_get_mtd_part_magic() {
- ar71xx_get_mtd_offset_size_format EEPROM 12 2 %02x
-}
-
-ubnt_unifi_ac_board_detect() {
- local model
- local magic
-
- magic="$(ubnt_unifi_ac_get_mtd_part_magic)"
- case ${magic:0:4} in
- "e517")
- model="Ubiquiti UniFi-AC-LITE"
- ;;
- "e527")
- model="Ubiquiti UniFi-AC-LR"
- ;;
- "e537")
- model="Ubiquiti UniFi-AC-PRO"
- ;;
- "e557")
- model="Ubiquiti UniFi-AC-MESH"
- ;;
- "e567")
- model="Ubiquiti UniFi-AC-MESH-PRO"
- ;;
- esac
-
- [ -z "$model" ] || AR71XX_MODEL="${model}"
-}
-
-cybertan_get_hw_magic() {
- local part
-
- part=$(find_mtd_part firmware)
- [ -z "$part" ] && return 1
-
- dd bs=8 count=1 skip=0 if=$part 2>/dev/null | hexdump -v -n 8 -e '1/1 "%02x"'
-}
-
-dir505_board_detect() {
- local dev=$(find_mtd_part 'mac')
- [ -z "$dev" ] && return
-
- # The revision is stored at the beginning of the "mac" partition
- local rev="$(LC_CTYPE=C awk -v 'FS=[^[:print:]]' '{print $1; exit}' $dev)"
- AR71XX_MODEL="D-Link DIR-505 rev. $rev"
-}
-
-tplink_get_hwid() {
- local part
-
- part=$(find_mtd_part firmware)
- [ -z "$part" ] && return 1
-
- dd if=$part bs=4 count=1 skip=16 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-tplink_get_mid() {
- local part
-
- part=$(find_mtd_part firmware)
- [ -z "$part" ] && return 1
-
- dd if=$part bs=4 count=1 skip=17 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-tplink_board_detect() {
- local model="$1"
- local hwid
- local hwver
-
- hwid=$(tplink_get_hwid)
- mid=$(tplink_get_mid)
- hwver=${hwid:6:2}
- hwver=" v${hwver#0}"
-
- case "$hwid" in
- "001001"*)
- model="TP-Link TL-MR10U"
- ;;
- "001101"*)
- model="TP-Link TL-MR11U"
- ;;
- "001201"*)
- model="TP-Link TL-MR12U"
- ;;
- "001301"*)
- model="TP-Link TL-MR13U"
- ;;
- "007260"*)
- model="TellStick ZNet Lite"
- ;;
- "015000"*)
- model="EasyLink EL-M150"
- ;;
- "015300"*)
- model="EasyLink EL-MINI"
- ;;
- "044401"*)
- model="ANTMINER-S1"
- ;;
- "044403"*)
- model="ANTMINER-S3"
- ;;
- "066601"*)
- model="OMYlink OMY-G1"
- ;;
- "066602"*)
- model="OMYlink OMY-X1"
- ;;
- "070100"*)
- model="TP-Link TL-WA701N/ND"
- ;;
- "070301"*)
- model="TP-Link TL-WR703N"
- ;;
- "071000"*)
- model="TP-Link TL-WR710N"
-
- [ "$hwid" = '07100002' -a "$mid" = '00000002' ] && hwver=' v2.1'
- ;;
- "072001"*)
- model="TP-Link TL-WR720N"
- ;;
- "073000"*)
- model="TP-Link TL-WA730RE"
- ;;
- "074000"*)
- model="TP-Link TL-WR740N/ND"
- ;;
- "074100"*)
- model="TP-Link TL-WR741N/ND"
- ;;
- "074300"*)
- model="TP-Link TL-WR743N/ND"
- ;;
- "075000"*)
- model="TP-Link TL-WA750RE"
- ;;
- "080100"*)
- model="TP-Link TL-WA801N/ND"
- ;;
- "080200"*)
- model="TP-Link TL-WR802N"
-
- [ "$hwid" = '08020002' -a "$mid" = '00000002' ] && hwver=' v2'
- ;;
- "081000"*)
- model="TP-Link TL-WR810N"
- ;;
- "083000"*)
- model="TP-Link TL-WA830RE"
-
- [ "$hwver" = ' v10' ] && hwver=' v1'
- ;;
- "084100"*)
- model="TP-Link TL-WR841N/ND"
-
- [ "$hwid" = '08410002' -a "$mid" = '00000002' ] && hwver=' v1.5'
- ;;
- "084200"*)
- model="TP-Link TL-WR842N/ND"
- ;;
- "084300"*)
- model="TP-Link TL-WR843N/ND"
- ;;
- "085000"*)
- model="TP-Link TL-WA850RE"
- ;;
- "085500"*)
- model="TP-Link TL-WA855RE"
- ;;
- "086000"*)
- model="TP-Link TL-WA860RE"
- ;;
- "090100"*)
- model="TP-Link TL-WA901N/ND"
- ;;
- "094000"*)
- model="TP-Link TL-WR940N"
- ;;
- "094100"*)
- model="TP-Link TL-WR941N/ND"
-
- [ "$hwid" = "09410002" -a "$mid" = "00420001" ] && {
- model="Rosewill RNX-N360RT"
- hwver=""
- }
- ;;
- "104100"*)
- model="TP-Link TL-WR1041N/ND"
- ;;
- "104300"*)
- model="TP-Link TL-WR1043N/ND"
- ;;
- "120000"*)
- model="MERCURY MAC1200R"
- ;;
- "254300"*)
- model="TP-Link TL-WR2543N/ND"
- ;;
- "302000"*)
- model="TP-Link TL-MR3020"
- ;;
- "304000"*)
- model="TP-Link TL-MR3040"
- ;;
- "322000"*)
- model="TP-Link TL-MR3220"
- ;;
- "332000"*)
- model="TP-Link TL-WDR3320"
- ;;
- "342000"*)
- model="TP-Link TL-MR3420"
- ;;
- "350000"*)
- model="TP-Link TL-WDR3500"
- ;;
- "360000"*)
- model="TP-Link TL-WDR3600"
- ;;
- "430000"*)
- model="TP-Link TL-WDR4300"
- ;;
- "430080"*)
- iw reg set IL
- model="TP-Link TL-WDR4300 (IL)"
- ;;
- "431000"*)
- model="TP-Link TL-WDR4310"
- ;;
- "44440101"*)
- model="ANTROUTER-R1"
- ;;
- "453000"*)
- model="Mercury MW4530R"
- ;;
- "49000002")
- model="TP-Link TL-WDR4900"
- ;;
- "640000"*)
- model="TP-Link TL-MR6400"
- ;;
- "65000002")
- model="TP-Link TL-WDR6500"
- ;;
- "721000"*)
- model="TP-Link TL-WA7210N"
- ;;
- "750000"*|\
- "c70000"*)
- model="TP-Link Archer C7"
- ;;
- "751000"*)
- model="TP-Link TL-WA7510N"
- ;;
- "934100"*)
- model="NC-LINK SMART-300"
- ;;
- "c50000"*)
- model="TP-Link Archer C5"
- ;;
- *)
- hwver=""
- ;;
- esac
-
- AR71XX_MODEL="$model$hwver"
-}
-
-tplink_pharos_get_model_string() {
- local part
- part=$(find_mtd_part 'product-info')
- [ -z "$part" ] && return 1
-
- # The returned string will end with \r\n, but we don't remove it here
- # to simplify matching against it in the sysupgrade image check
- dd if=$part bs=1 skip=4360 2>/dev/null | head -n 1
-}
-
-tplink_pharos_board_detect() {
- local model_string="$1"
- local oIFS="$IFS"; IFS=":"; set -- $model_string; IFS="$oIFS"
-
- local model="${1%%\(*}"
-
- AR71XX_MODEL="TP-Link $model v$2"
-}
-
-tplink_pharos_v2_get_model_string() {
- local part
- part=$(find_mtd_part 'product-info')
- [ -z "$part" ] && return 1
-
- dd if=$part iflag=skip_bytes bs=64 skip=4360 count=1 2>/dev/null | tr -d '\r\0' | head -n 1
-}
-
-mikrotik_board_detect() {
- local machine="$1"
-
- case "$machine" in
- *"2011iL")
- name="rb-2011il"
- ;;
- *"2011iLS")
- name="rb-2011ils"
- ;;
- *"2011L")
- name="rb-2011l"
- ;;
- *"2011UAS")
- name="rb-2011uas"
- ;;
- *"2011UAS-2HnD")
- name="rb-2011uas-2hnd"
- ;;
- *"2011UiAS")
- name="rb-2011uias"
- ;;
- *"2011UiAS-2HnD")
- name="rb-2011uias-2hnd"
- ;;
- *"2011UiAS-2HnD r2")
- name="rb-2011uias-2hnd-r2"
- ;;
- *"411/A/AH")
- name="rb-411"
- ;;
- *"411U")
- name="rb-411u"
- ;;
- *"433/AH")
- name="rb-433"
- ;;
- *"433UAH")
- name="rb-433u"
- ;;
- *"435G")
- name="rb-435g"
- ;;
- *"450")
- name="rb-450"
- ;;
- *"450G")
- name="rb-450g"
- ;;
- *"493/AH")
- name="rb-493"
- ;;
- *"493G")
- name="rb-493g"
- ;;
- *"750")
- name="rb-750"
- ;;
- *"750 r2"|\
- *"750r2")
- name="rb-750-r2"
- ;;
- *"750GL")
- name="rb-750gl"
- ;;
- *"750P r2")
- name="rb-750p-pbr2"
- ;;
- *"750UP r2"|\
- *"750UPr2")
- name="rb-750up-r2"
- ;;
- *"751")
- name="rb-751"
- ;;
- *"751G")
- name="rb-751g"
- ;;
- *"911-2Hn")
- name="rb-911-2hn"
- ;;
- *"911-5Hn")
- name="rb-911-5hn"
- ;;
- *"911G-2HPnD")
- name="rb-911g-2hpnd"
- ;;
- *"911G-5HPacD")
- name="rb-911g-5hpacd"
- ;;
- *"911G-5HPnD")
- name="rb-911g-5hpnd"
- ;;
- *"912UAG-2HPnD")
- name="rb-912uag-2hpnd"
- ;;
- *"912UAG-5HPnD")
- name="rb-912uag-5hpnd"
- ;;
- *"921GS-5HPacD r2")
- name="rb-921gs-5hpacd-r2"
- ;;
- *"922UAGS-5HPacD")
- name="rb-922uags-5hpacd"
- ;;
- *"931-2nD")
- name="rb-931-2nd"
- ;;
- *"941-2nD")
- name="rb-941-2nd"
- ;;
- *"951G-2HnD")
- name="rb-951g-2hnd"
- ;;
- *"951Ui-2HnD")
- name="rb-951ui-2hnd"
- ;;
- *"951Ui-2nD")
- name="rb-951ui-2nd"
- ;;
- *"952Ui-5ac2nD")
- name="rb-952ui-5ac2nd"
- ;;
- *"962UiGS-5HacT2HnT")
- name="rb-962uigs-5hact2hnt"
- ;;
- *"LHG 5nD")
- name="rb-lhg-5nd"
- ;;
- *"mAP 2nD"|\
- *"mAP2nD")
- name="rb-map-2nd"
- ;;
- *"mAP L-2nD"|\
- *"mAPL-2nD")
- name="rb-mapl-2nd"
- ;;
- *"SXT 2nD r3")
- name="rb-sxt-2nd-r3"
- ;;
- *"SXT Lite2")
- name="rb-sxt2n"
- ;;
- *"SXT Lite5")
- name="rb-sxt5n"
- ;;
- *"wAP 2nD r2")
- name="rb-wap-2nd"
- ;;
- *"wAP R-2nD"|\
- *"wAPR-2nD")
- name="rb-wapr-2nd"
- ;;
- *"wAP G-5HacT2HnD"|\
- *"wAPG-5HacT2HnD")
- name="rb-wapg-5hact2hnd"
- ;;
- esac
-
- echo "$name"
-}
-
-ar71xx_board_detect() {
- local machine
- local name
-
- machine=$(awk 'BEGIN{FS="[ \t]+:[ \t]"} /machine/ {print $2}' /proc/cpuinfo)
-
- case "$machine" in
- *"A40")
- name="a40"
- ;;
- *"A60")
- name="a60"
- ;;
- *"AC1750DB")
- name="f9k1115v2"
- ;;
- *"AirGateway")
- name="airgateway"
- ;;
- *"AirGateway Pro")
- name="airgatewaypro"
- ;;
- *"AirRouter")
- name="airrouter"
- ;;
- *"ALFA Network AP120C")
- name="alfa-ap120c"
- ;;
- *"ALFA Network AP96")
- name="alfa-ap96"
- ;;
- *"ALFA Network N2/N5")
- name="alfa-nx"
- ;;
- *"ALL0258N")
- name="all0258n"
- ;;
- *"ALL0305")
- name="all0305"
- ;;
- *"ALL0315N")
- name="all0315n"
- ;;
- *"Antminer-S1")
- name="antminer-s1"
- ;;
- *"Antminer-S3")
- name="antminer-s3"
- ;;
- *"AP121 reference board")
- name="ap121"
- ;;
- *"AP121-MINI")
- name="ap121-mini"
- ;;
- *"AP121F")
- name="ap121f"
- ;;
- *"AP132 reference board")
- name="ap132"
- ;;
- *"AP135-020 reference board")
- name="ap135-020"
- ;;
- *"AP136-010 reference board")
- name="ap136-010"
- ;;
- *"AP136-020 reference board")
- name="ap136-020"
- ;;
- *"AP143 reference board")
- name="ap143"
- ;;
- *"AP147-010 reference board")
- name="ap147-010"
- ;;
- *"AP152 reference board")
- name="ap152"
- ;;
- *"AP531B0")
- name="ap531b0"
- ;;
- *"AP90Q")
- name="ap90q"
- ;;
- *"AP91-5G")
- name="ap91-5g"
- ;;
- *"Archer C25 v1")
- name="archer-c25-v1"
- ;;
- *"Archer C5")
- name="archer-c5"
- ;;
- *"Archer C7 v4")
- name="archer-c7-v4"
- ;;
- *"Archer C7 v5")
- name="archer-c7-v5"
- ;;
- *"Archer C58 v1")
- name="archer-c58-v1"
- ;;
- *"Archer C59 v1")
- name="archer-c59-v1"
- ;;
- *"Archer C59 v2")
- name="archer-c59-v2"
- ;;
- *"Archer C60 v1")
- name="archer-c60-v1"
- ;;
- *"Archer C60 v2")
- name="archer-c60-v2"
- ;;
- *"Archer C7")
- name="archer-c7"
- ;;
- *"Arduino Yun")
- name="arduino-yun"
- ;;
- *"Atheros AP96")
- name="ap96"
- ;;
- *"AW-NR580")
- name="aw-nr580"
- ;;
- *"BHR-4GRV2")
- name="bhr-4grv2"
- ;;
- *"Black Swift board"*)
- name="bsb"
- ;;
- *"Bullet M")
- name="bullet-m"
- ubnt_xm_board_detect
- ;;
- *"Bullet M XW")
- name="bullet-m-xw"
- ;;
- *"BXU2000n-2 rev. A1")
- name="bxu2000n-2-a1"
- ;;
- *"C-55")
- name="c-55"
- ;;
- *"C-60")
- name="c-60"
- ;;
- *"CAP324")
- name="cap324"
- ;;
- *"CAP4200AG")
- name="cap4200ag"
- ;;
- *"Carambola2"*)
- name="carambola2"
- ;;
- *"CF-E316N v2")
- name="cf-e316n-v2"
- ;;
- *"CF-E320N v2")
- name="cf-e320n-v2"
- ;;
- *"CF-E355AC v1")
- name="cf-e355ac-v1"
- ;;
- *"CF-E355AC v2")
- name="cf-e355ac-v2"
- ;;
- *"CF-E375AC")
- name="cf-e375ac"
- ;;
- *"CF-E380AC v1")
- name="cf-e380ac-v1"
- ;;
- *"CF-E380AC v2")
- name="cf-e380ac-v2"
- ;;
- *"CF-E385AC")
- name="cf-e385ac"
- ;;
- *"CF-E520N")
- name="cf-e520n"
- ;;
- *"CF-E530N")
- name="cf-e530n"
- ;;
- *"CPE210/220")
- name="cpe210"
- tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
- ;;
- *"CPE210 v2")
- name="cpe210-v2"
- tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)"
- ;;
- *"CPE210 v3")
- name="cpe210-v3"
- tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)"
- ;;
- *"CPE505N")
- name="cpe505n"
- ;;
- *"CPE510/520")
- name="cpe510"
- tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
- ;;
- *"CPE510 v2")
- name="cpe510-v2"
- tplink_pharos_board_detect "$(tplink_pharos_v2_get_model_string)"
- ;;
- *"CPE830")
- name="cpe830"
- ;;
- *"CPE870")
- name="cpe870"
- ;;
- *"CR3000")
- name="cr3000"
- ;;
- *"CR5000")
- name="cr5000"
- ;;
- *"DAP-1330 Rev. A1")
- name="dap-1330-a1"
- ;;
- *"DAP-2695 rev. A1")
- name="dap-2695-a1"
- ;;
- *"DB120 reference board")
- name="db120"
- ;;
- *"DGL-5500 rev. A1")
- name="dgl-5500-a1"
- ;;
- *"DHP-1565 rev. A1")
- name="dhp-1565-a1"
- ;;
- *"DIR-505 rev. A1")
- name="dir-505-a1"
- dir505_board_detect
- ;;
- *"DIR-600 rev. A1")
- name="dir-600-a1"
- ;;
- *"DIR-615 rev. C1")
- name="dir-615-c1"
- ;;
- *"DIR-615 rev. E1")
- name="dir-615-e1"
- ;;
- *"DIR-615 rev. E4")
- name="dir-615-e4"
- ;;
- *"DIR-615 rev. I1")
- name="dir-615-i1"
- ;;
- *"DIR-825 rev. B1")
- name="dir-825-b1"
- ;;
- *"DIR-825 rev. C1")
- name="dir-825-c1"
- ;;
- *"DIR-835 rev. A1")
- name="dir-835-a1"
- ;;
- *"DIR-869 rev. A1")
- name="dir-869-a1"
- ;;
- *"dLAN Hotspot")
- name="dlan-hotspot"
- ;;
- *"dLAN pro 1200+ WiFi ac")
- name="dlan-pro-1200-ac"
- ;;
- *"dLAN pro 500 Wireless+")
- name="dlan-pro-500-wp"
- ;;
- *"Domino Pi")
- name="gl-domino"
- ;;
- *"DR342")
- name="dr342"
- ;;
- *"DR344")
- name="dr344"
- ;;
- *"DR531")
- name="dr531"
- ;;
- *"Dragino v2")
- name="dragino2"
- ;;
- *"DW33D")
- name="dw33d"
- ;;
- *"E1700AC v2")
- name="e1700ac-v2"
- ;;
- *"E2100L")
- name="e2100l"
- ;;
- *"E558 v2")
- name="e558-v2"
- ;;
- *"E600G v2")
- name="e600g-v2"
- ;;
- *"E600GAC v2")
- name="e600gac-v2"
- ;;
- *"E750A v4")
- name="e750a-v4"
- ;;
- *"E750G v8")
- name="e750g-v8"
- ;;
- *"EAP120")
- name="eap120"
- tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
- ;;
- *"EAP300 v2")
- name="eap300v2"
- ;;
- *"EAP7660D")
- name="eap7660d"
- ;;
- *"EBR-2310 rev. C1")
- name="ebr-2310-c1"
- ;;
- *"EL-M150")
- name="el-m150"
- ;;
- *"EL-MINI")
- name="el-mini"
- ;;
- *"EmbWir-Balin")
- name="ew-balin"
- ;;
- *"EmbWir-Dorin")
- name="ew-dorin"
- ;;
- *"EmbWir-Dorin-Router")
- name="ew-dorin-router"
- ;;
- *"ENS202EXT")
- name="ens202ext"
- ;;
- *"EPG5000")
- name="epg5000"
- ;;
- *"ESR1750")
- name="esr1750"
- ;;
- *"ESR900")
- name="esr900"
- ;;
- *"eTactica EG-200")
- name="rme-eg200"
- ;;
- *"FRITZ!Box 4020")
- name="fritz4020"
- ;;
- *"FRITZ!WLAN Repeater 300E")
- name="fritz300e"
- ;;
- *"FRITZ!WLAN Repeater 450E")
- name="fritz450e"
- ;;
- *"GL-AR150")
- name="gl-ar150"
- ;;
- *"GL-AR300")
- name="gl-ar300"
- ;;
- *"GL-AR300M")
- name="gl-ar300m"
- ;;
- *"GL-AR750")
- name="gl-ar750"
- ;;
- *"GL-AR750S")
- name="gl-ar750s"
- ;;
- *"GL-CONNECT INET v1")
- name="gl-inet"
-
- local size="$(mtd_get_part_size 'firmware')"
-
- [ "$size" = "8192000" ] && AR71XX_MODEL="GL-iNet 6408A v1"
- [ "$size" = "16580608" ] && AR71XX_MODEL="GL-iNet 6416A v1"
- ;;
- *"GL-MIFI")
- name="gl-mifi"
- ;;
- *"GL-USB150")
- name="gl-usb150"
- ;;
- *"HiveAP-121")
- name="hiveap-121"
- ;;
- *"HiWiFi HC6361")
- name="hiwifi-hc6361"
- ;;
- *"Hornet-UB")
- local size="$(mtd_get_part_size 'firmware')"
-
- [ "$size" = "7929856" ] && name="hornet-ub"
- [ "$size" = "16318464" ] && name="hornet-ub-x2"
- ;;
- *"JA76PF")
- name="ja76pf"
- ;;
- *"JA76PF2")
- name="ja76pf2"
- ;;
- *"JWAP003")
- name="jwap003"
- ;;
- *"JWAP230")
- name="jwap230"
- ;;
- *"Koala")
- name="koala"
- ;;
- *"LAN Turtle")
- name="lan-turtle"
- ;;
- *"Lima"*)
- name="lima"
- ;;
- *"Litebeam M5"*)
- name="lbe-m5"
- ;;
- *"Loco M XW")
- name="loco-m-xw"
- ;;
- *"LS-SR71")
- name="ls-sr71"
- ;;
- *"MAC1200R")
- name="mc-mac1200r"
- ;;
- "MikroTik"*|\
- "Mikrotik"*)
- name=$(mikrotik_board_detect "$machine")
- ;;
- *"MiniBox V1.0")
- name="minibox-v1"
- ;;
- *"Minibox V3.2")
- name="minibox-v3.2"
- ;;
- *"MR12")
- name="mr12"
- ;;
- *"MR16")
- name="mr16"
- ;;
- *"MR1750")
- name="mr1750"
- ;;
- *"MR1750v2")
- name="mr1750v2"
- ;;
- *"MR18")
- name="mr18"
- ;;
- *"MR600")
- name="mr600"
- ;;
- *"MR600v2")
- name="mr600v2"
- ;;
- *"MR900")
- name="mr900"
- ;;
- *"MR900v2")
- name="mr900v2"
- ;;
- *"My Net N600")
- name="mynet-n600"
- ;;
- *"My Net N750")
- name="mynet-n750"
- ;;
- *"My Net Wi-Fi Range Extender")
- name="mynet-rext"
- ;;
- *"MZK-W04NU")
- name="mzk-w04nu"
- ;;
- *"MZK-W300NH")
- name="mzk-w300nh"
- ;;
- *"N5Q")
- name="n5q"
- ;;
- *"Nanostation M")
- name="nanostation-m"
- ubnt_xm_board_detect
- ;;
- *"Nanostation M XW")
- name="nanostation-m-xw"
- ;;
- *"NBG460N/550N/550NH")
- name="nbg460n_550n_550nh"
- ;;
- *"NBG6616")
- name="nbg6616"
- ;;
- *"NBG6716")
- name="nbg6716"
- ;;
- *"OM2P")
- name="om2p"
- ;;
- *"OM2P HS")
- name="om2p-hs"
- ;;
- *"OM2P HSv2")
- name="om2p-hsv2"
- ;;
- *"OM2P HSv3")
- name="om2p-hsv3"
- ;;
- *"OM2P HSv4")
- name="om2p-hsv4"
- ;;
- *"OM2P LC")
- name="om2p-lc"
- ;;
- *"OM2Pv2")
- name="om2pv2"
- ;;
- *"OM2Pv4")
- name="om2pv4"
- ;;
- *"OM5P")
- name="om5p"
- ;;
- *"OM5P AC")
- name="om5p-ac"
- ;;
- *"OM5P ACv2")
- name="om5p-acv2"
- ;;
- *"OM5P AN")
- name="om5p-an"
- ;;
- *"OMY-G1")
- name="omy-g1"
- ;;
- *"OMY-X1")
- name="omy-x1"
- ;;
- *"Onion Omega")
- name="onion-omega"
- ;;
- *"Oolite V1.0")
- name="oolite-v1"
- ;;
- *"Packet Squirrel")
- name="packet-squirrel"
- ;;
- *"Oolite V5.2")
- name="oolite-v5.2"
- ;;
- *"Oolite V5.2-Dev")
- name="oolite-v5.2-dev"
- ;;
- *"PB42")
- name="pb42"
- ;;
- *"PB44 reference board")
- name="pb44"
- ;;
- *"PQI Air Pen")
- name="pqi-air-pen"
- ;;
- *"Qihoo 360 C301")
- name="qihoo-c301"
- ;;
- *"R36A")
- name="r36a"
- ;;
- *"R602N")
- name="r602n"
- ;;
- *"R6100")
- name="r6100"
- ;;
- *"Rambutan"*)
- name="rambutan"
- ;;
- *"RE355")
- name="re355"
- ;;
- *"RE450")
- name="re450"
- ;;
- *"Rocket M")
- name="rocket-m"
- ubnt_xm_board_detect
- ;;
- *"Rocket M TI")
- name="rocket-m-ti"
- ;;
- *"Rocket M XW")
- name="rocket-m-xw"
- ;;
- *"RouterStation")
- name="routerstation"
- ;;
- *"RouterStation Pro")
- name="routerstation-pro"
- ;;
- *"RUT900")
- name="rut900"
- ;;
- *"RW2458N")
- name="rw2458n"
- ;;
- *"SC1750")
- name="sc1750"
- ;;
- *"SC300M")
- name="sc300m"
- ;;
- *"SC450")
- name="sc450"
- ;;
- *"SMART-300")
- name="smart-300"
- ;;
- *"SOM9331")
- name="som9331"
- ;;
- *"SR3200")
- name="sr3200"
- ;;
- *"T830")
- name="t830"
- ;;
- *"TellStick ZNet Lite")
- name="tellstick-znet-lite"
- ;;
- *"TEW-632BRP")
- name="tew-632brp"
- ;;
- *"TEW-673GRU")
- name="tew-673gru"
- ;;
- *"TEW-712BR")
- name="tew-712br"
- ;;
- *"TEW-732BR")
- name="tew-732br"
- ;;
- *"TEW-823DRU")
- name="tew-823dru"
- ;;
- *"TL-MR10U")
- name="tl-mr10u"
- ;;
- *"TL-MR11U")
- name="tl-mr11u"
- ;;
- *"TL-MR12U")
- name="tl-mr12u"
- ;;
- *"TL-MR13U v1")
- name="tl-mr13u"
- ;;
- *"TL-MR3020")
- name="tl-mr3020"
- ;;
- *"TL-MR3040")
- name="tl-mr3040"
- ;;
- *"TL-MR3040 v2")
- name="tl-mr3040-v2"
- ;;
- *"TL-MR3220")
- name="tl-mr3220"
- ;;
- *"TL-MR3220 v2")
- name="tl-mr3220-v2"
- ;;
- *"TL-MR3420")
- name="tl-mr3420"
- ;;
- *"TL-MR3420 v2")
- name="tl-mr3420-v2"
- ;;
- *"TL-MR6400")
- name="tl-mr6400"
- ;;
- *"TL-WA701ND v2")
- name="tl-wa701nd-v2"
- ;;
- *"TL-WA7210N v2")
- name="tl-wa7210n-v2"
- ;;
- *"TL-WA750RE")
- name="tl-wa750re"
- ;;
- *"TL-WA7510N v1")
- name="tl-wa7510n"
- ;;
- *"TL-WA801ND v2")
- name="tl-wa801nd-v2"
- ;;
- *"TL-WA801ND v3")
- name="tl-wa801nd-v3"
- ;;
- *"TL-WA830RE v2")
- name="tl-wa830re-v2"
- ;;
- *"TL-WA850RE")
- name="tl-wa850re"
- ;;
- *"TL-WA850RE v2")
- name="tl-wa850re-v2"
- ;;
- *"TL-WA855RE v1")
- name="tl-wa855re-v1"
- ;;
- *"TL-WA860RE")
- name="tl-wa860re"
- ;;
- *"TL-WA901ND")
- name="tl-wa901nd"
- ;;
- *"TL-WA901ND v2")
- name="tl-wa901nd-v2"
- ;;
- *"TL-WA901ND v3")
- name="tl-wa901nd-v3"
- ;;
- *"TL-WA901ND v4")
- name="tl-wa901nd-v4"
- ;;
- *"TL-WA901ND v5")
- name="tl-wa901nd-v5"
- ;;
- *"TL-WDR3320 v2")
- name="tl-wdr3320-v2"
- ;;
- *"TL-WDR3500")
- name="tl-wdr3500"
- ;;
- *"TL-WDR3600/4300/4310")
- name="tl-wdr4300"
- ;;
- *"TL-WDR4900 v2")
- name="tl-wdr4900-v2"
- ;;
- *"TL-WDR6500 v2")
- name="tl-wdr6500-v2"
- ;;
- *"TL-WPA8630")
- name="tl-wpa8630"
- ;;
- *"TL-WR1041N v2")
- name="tl-wr1041n-v2"
- ;;
- *"TL-WR1043N v5")
- name="tl-wr1043n-v5"
- ;;
- *"TL-WR1043ND")
- name="tl-wr1043nd"
- ;;
- *"TL-WR1043ND v2")
- name="tl-wr1043nd-v2"
- ;;
- *"TL-WR1043ND v4")
- name="tl-wr1043nd-v4"
- ;;
- *"TL-WR2543N"*)
- name="tl-wr2543n"
- ;;
- *"TL-WR703N v1")
- name="tl-wr703n"
- ;;
- *"TL-WR710N v1")
- name="tl-wr710n"
- ;;
- *"TL-WR720N"*)
- name="tl-wr720n-v3"
- ;;
- *"TL-WR740N/ND v6")
- name="tl-wr740n-v6"
- ;;
- *"TL-WR741ND")
- name="tl-wr741nd"
- ;;
- *"TL-WR741ND v4")
- name="tl-wr741nd-v4"
- ;;
- *"TL-WR802N v1")
- name="tl-wr802n-v1"
- ;;
- *"TL-WR802N v2")
- name="tl-wr802n-v2"
- ;;
- *"TL-WR810N")
- name="tl-wr810n"
- ;;
- *"TL-WR810N v2")
- name="tl-wr810n-v2"
- ;;
- *"TL-WR840N v2")
- name="tl-wr840n-v2"
- ;;
- *"TL-WR840N v3")
- name="tl-wr840n-v3"
- ;;
- *"TL-WR841N v1")
- name="tl-wr841n-v1"
- ;;
- *"TL-WR841N/ND v11")
- name="tl-wr841n-v11"
- ;;
- *"TL-WR841N/ND v7")
- name="tl-wr841n-v7"
- ;;
- *"TL-WR841N/ND v8")
- name="tl-wr841n-v8"
- ;;
- *"TL-WR841N/ND v9")
- name="tl-wr841n-v9"
- ;;
- *"TL-WR842N/ND v2")
- name="tl-wr842n-v2"
- ;;
- *"TL-WR842N/ND v3")
- name="tl-wr842n-v3"
- ;;
- *"TL-WR902AC v1")
- name="tl-wr902ac-v1"
- ;;
- *"TL-WR940N v4")
- name="tl-wr940n-v4"
- ;;
- *"TL-WR940N v6")
- name="tl-wr940n-v6"
- ;;
- *"TL-WR941N/ND v5")
- name="tl-wr941nd-v5"
- ;;
- *"TL-WR941N/ND v6")
- name="tl-wr941nd-v6"
- ;;
- *"TL-WR941ND")
- name="tl-wr941nd"
- ;;
- *"TL-WR942N v1")
- name="tl-wr942n-v1"
- ;;
- *"TS-D084")
- name="ts-d084"
- ;;
- *"Tube2H")
- name="tube2h"
- ;;
- *"UniFi")
- name="unifi"
- ;;
- *"UniFi AP Pro")
- name="uap-pro"
- ;;
- *"UniFi-AC-LITE/MESH")
- name="unifiac-lite"
- ubnt_unifi_ac_board_detect
- ;;
- *"UniFi-AC-PRO/MESH-PRO")
- name="unifiac-pro"
- ubnt_unifi_ac_board_detect
- ;;
- *"UniFiAP Outdoor")
- name="unifi-outdoor"
- ;;
- *"UniFiAP Outdoor+")
- name="unifi-outdoor-plus"
- ;;
- *"WAM250")
- name="wam250"
- ;;
- *"WBS210")
- name="wbs210"
- tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
- ;;
- *"WBS510")
- name="wbs510"
- tplink_pharos_board_detect "$(tplink_pharos_get_model_string | tr -d '\r')"
- ;;
- "WeIO"*)
- name="weio"
- ;;
- *"WI2A-AC200i")
- name="wi2a-ac200i"
- ;;
- *"WHR-G301N")
- name="whr-g301n"
- ;;
- *"WHR-HP-G300N")
- name="whr-hp-g300n"
- ;;
- *"WHR-HP-GN")
- name="whr-hp-gn"
- ;;
- *"WiFi Pineapple NANO")
- name="wifi-pineapple-nano"
- ;;
- *"WLAE-AG300N")
- name="wlae-ag300n"
- ;;
- *"WLR-8100")
- name="wlr8100"
- ;;
- *"WNDAP360")
- name="wndap360"
- ;;
- *"WNDR3700/WNDR3800/WNDRMAC")
- wndr3700_board_detect "$machine"
- ;;
- *"WNDR3700v4")
- name="wndr3700v4"
- ;;
- *"WNDR4300")
- name="wndr4300"
- ;;
- *"WNR1000 V2")
- name="wnr1000-v2"
- ;;
- *"WNR2000")
- name="wnr2000"
- ;;
- *"WNR2000 V3")
- name="wnr2000-v3"
- ;;
- *"WNR2000 V4")
- name="wnr2000-v4"
- ;;
- *"WNR2200")
- name="wnr2200"
- ;;
- *"WNR612 V2")
- name="wnr612-v2"
- ;;
- *"WP543")
- name="wp543"
- ;;
- *"WPE72")
- name="wpe72"
- ;;
- *"WPJ342")
- name="wpj342"
- ;;
- *"WPJ344")
- name="wpj344"
- ;;
- *"WPJ531")
- name="wpj531"
- ;;
- *"WPJ558")
- name="wpj558"
- ;;
- *"WPJ563")
- name="wpj563"
- ;;
- *"WPN824N")
- name="wpn824n"
- ;;
- *"WRT160NL")
- name="wrt160nl"
- ;;
- *"WRT400N")
- name="wrt400n"
- ;;
- *"WRTnode2Q"*)
- name="wrtnode2q"
- ;;
- *"WZR-450HP2")
- name="wzr-450hp2"
- ;;
- *"WZR-HP-AG300H/WZR-600DHP")
- name="wzr-hp-ag300h"
- ;;
- *"WZR-HP-G300NH")
- name="wzr-hp-g300nh"
- ;;
- *"WZR-HP-G300NH2")
- name="wzr-hp-g300nh2"
- ;;
- *"WZR-HP-G450H")
- name="wzr-hp-g450h"
- ;;
- *"XD3200")
- name="xd3200"
- ;;
- *"Z1")
- name="z1"
- ;;
- *"ZBT-WE1526")
- name="zbt-we1526"
- ;;
- *"ZCN-1523H-2")
- name="zcn-1523h-2"
- ;;
- *"ZCN-1523H-5")
- name="zcn-1523h-5"
- ;;
- esac
-
- [ -z "$AR71XX_MODEL" ] && [ "${machine:0:8}" = 'TP-LINK ' ] && \
- tplink_board_detect "$machine"
-
- [ -z "$name" ] && name="unknown"
-
- [ -z "$AR71XX_BOARD_NAME" ] && AR71XX_BOARD_NAME="$name"
- [ -z "$AR71XX_MODEL" ] && AR71XX_MODEL="$machine"
-
- [ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
-
- echo "$AR71XX_BOARD_NAME" > /tmp/sysinfo/board_name
- echo "$AR71XX_MODEL" > /tmp/sysinfo/model
-}
diff --git a/target/linux/ar71xx/base-files/lib/preinit/01_preinit_do_ar71xx.sh b/target/linux/ar71xx/base-files/lib/preinit/01_preinit_do_ar71xx.sh
deleted file mode 100644
index ff5407a0d4..0000000000
--- a/target/linux/ar71xx/base-files/lib/preinit/01_preinit_do_ar71xx.sh
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-do_ar71xx() {
- . /lib/ar71xx.sh
-
- ar71xx_board_detect
-}
-
-boot_hook_add preinit_main do_ar71xx
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
deleted file mode 100644
index b0aa150817..0000000000
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_iface_mac_ar71xx
+++ /dev/null
@@ -1,60 +0,0 @@
-#
-# Copyright (C) 2009 OpenWrt.org
-#
-
-fetch_mac_from_mtd() {
- local mtd_part=$1
- local lan_env=$2
- local wan_env=$3
- local mtd mac
-
- mtd=$(grep $mtd_part /proc/mtd | cut -d: -f1)
- [ -z $mtd ] && return
-
- mac=$(grep $lan_env /dev/$mtd | cut -d= -f2)
- [ ! -z $mac ] && ifconfig eth0 hw ether $mac 2>/dev/null
-
- mac=$(grep $wan_env /dev/$mtd | cut -d= -f2)
- [ ! -z $mac ] && ifconfig eth1 hw ether $mac 2>/dev/null
-}
-
-preinit_set_mac_address() {
- . /lib/functions.sh
-
- case $(board_name) in
- c-55|\
- c-60)
- mac_lan=$(mtd_get_mac_binary art 0x0)
- [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
- ;;
- dir-615-c1|\
- tew-632brp)
- fetch_mac_from_mtd config lan_mac wan_mac
- ;;
- dir-615-i1)
- fetch_mac_from_mtd nvram sys_lan_mac sys_wan_mac
- ;;
- mr18|\
- z1)
- mac_lan=$(mtd_get_mac_binary_ubi board-config 0x66)
- [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
- ;;
- r6100)
- mac_lan=$(mtd_get_mac_binary caldata 0x0)
- [ -n "$mac_lan" ] && ifconfig eth1 hw ether "$mac_lan"
- mac_wan=$(mtd_get_mac_binary caldata 0x6)
- [ -n "$mac_wan" ] && ifconfig eth0 hw ether "$mac_wan"
- ;;
- rambutan)
- mac_lan=$(mtd_get_mac_binary art 0x0)
- [ -n "$mac_lan" ] && ifconfig eth0 hw ether "$mac_lan"
- mac_wan=$(mtd_get_mac_binary art 0x6)
- [ -n "$mac_wan" ] && ifconfig eth1 hw ether "$mac_wan"
- ;;
- wrt160nl)
- fetch_mac_from_mtd nvram lan_hwaddr wan_hwaddr
- ;;
- esac
-}
-
-boot_hook_add preinit_main preinit_set_mac_address
diff --git a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx b/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
deleted file mode 100644
index 68875fa1ec..0000000000
--- a/target/linux/ar71xx/base-files/lib/preinit/05_set_preinit_iface_ar71xx
+++ /dev/null
@@ -1,57 +0,0 @@
-#!/bin/sh
-
-#
-# Copyright (C) 2009 OpenWrt.org
-#
-
-set_preinit_iface() {
- . /lib/functions.sh
-
- case $(board_name) in
- alfa-ap96|\
- alfa-nx|\
- ap135-020|\
- ap136-020|\
- ap147-010|\
- archer-c5|\
- archer-c7|\
- bhr-4grv2|\
- dir-505-a1|\
- gl-ar750|\
- gl-inet|\
- jwap003|\
- pb42|\
- pb44|\
- rb-433|\
- rb-433u|\
- rb-435g|\
- rb-450|\
- rb-450g|\
- routerstation|\
- routerstation-pro|\
- smart-300|\
- tl-mr3420-v2|\
- tl-wdr4900-v2|\
- tl-wr1043nd-v2|\
- tl-wr710n|\
- tl-wr720n-v3|\
- tl-wr841n-v8|\
- tl-wr842n-v2|\
- tl-wr940n-v4|\
- tl-wr940n-v6|\
- tl-wr941nd-v6|\
- wnr1000-v2|\
- wnr2000-v3|\
- wnr2200|\
- wnr612-v2|\
- wpe72|\
- wpn824n)
- ifname=eth1
- ;;
- *)
- ifname=eth0
- ;;
- esac
-}
-
-boot_hook_add preinit_main set_preinit_iface
diff --git a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k b/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k
deleted file mode 100644
index cc3dc42c9c..0000000000
--- a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-
-do_patch_ath10k_firmware() {
- local firmware_file="/lib/firmware/ath10k/QCA988X/hw2.0/firmware-5.bin"
-
- # bail out if firmware does not exist
- [ -f "$firmware_file" ] || return
-
- local mac_offset=276
- local mac_length=6
- local default_mac="00:03:07:12:34:56"
- local current_mac="$(hexdump -v -n $mac_length -s $mac_offset -e '5/1 "%02x:" 1/1 "%02x"' $firmware_file 2>/dev/null)"
-
- # check if mac address was already patched
- [ "$default_mac" = "$current_mac" ] || return
-
- # some boards have bogus mac in otp (= directly in the PCIe card's EEPROM).
- # we have to patch the default mac in the firmware because we cannot change
- # the otp.
- case $(board_name) in
- dgl-5500-a1|\
- tew-823dru)
- local mac
- mac=$(mtd_get_mac_ascii nvram wlan1_mac)
-
- cp $firmware_file /tmp/ath10k-firmware.bin
- macaddr_2bin $mac | dd of=/tmp/ath10k-firmware.bin \
- conv=notrunc bs=1 seek=$mac_offset count=$mac_length
- ;;
- esac
-
- [ -f /tmp/ath10k-firmware.bin ] || return
-
- cp /tmp/ath10k-firmware.bin $firmware_file
- rm /tmp/ath10k-firmware.bin
-}
-
-check_patch_ath10k_firmware() {
- case $(board_name) in
- dgl-5500-a1|\
- tew-823dru)
- do_patch_ath10k_firmware
- ;;
- esac
-}
-
-boot_hook_add preinit_main check_patch_ath10k_firmware
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/allnet.sh b/target/linux/ar71xx/base-files/lib/upgrade/allnet.sh
deleted file mode 100644
index 5295d8cfe0..0000000000
--- a/target/linux/ar71xx/base-files/lib/upgrade/allnet.sh
+++ /dev/null
@@ -1,155 +0,0 @@
-# The U-Boot loader of the some Allnet devices requires image sizes and
-# checksums to be provided in the U-Boot environment.
-# In case the check fails during boot, a failsafe-system is started to provide
-# a minimal web-interface for flashing a new firmware.
-
-# determine size of the main firmware partition
-platform_get_firmware_size() {
- local dev size erasesize name
- while read dev size erasesize name; do
- name=${name#'"'}; name=${name%'"'}
- case "$name" in
- firmware)
- printf "%d" "0x$size"
- break
- ;;
- esac
- done < /proc/mtd
-}
-
-# get the first 4 bytes (magic) of a given file starting at offset in hex format
-get_magic_long_at() {
- dd if="$1" skip=$(( $CI_BLKSZ / 4 * $2 )) bs=4 count=1 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-get_filesize() {
- wc -c "$1" | while read image_size _n ; do echo $image_size ; break; done
-}
-
-# scan through the update image pages until matching a magic
-platform_get_offset() {
- offsetcount=0
- magiclong="x"
- if [ -n "$3" ]; then
- offsetcount=$3
- fi
- while magiclong=$( get_magic_long_at "$1" "$offsetcount" ) && [ -n "$magiclong" ]; do
- case "$magiclong" in
- "2705"*)
- # U-Boot image magic
- if [ "$2" = "uImage" ]; then
- echo $offsetcount
- return
- fi
- ;;
- "68737173"|"73717368")
- # SquashFS
- if [ "$2" = "rootfs" ]; then
- echo $offsetcount
- return
- fi
- ;;
- "deadc0de"|"19852003")
- # JFFS2 empty page
- if [ "$2" = "rootfs-data" ]; then
- echo $offsetcount
- return
- fi
- ;;
- esac
- offsetcount=$(( $offsetcount + 1 ))
- done
-}
-
-platform_check_image_allnet() {
- local fw_printenv=/usr/sbin/fw_printenv
- [ ! -n "$fw_printenv" -o ! -x "$fw_printenv" ] && {
- echo "Please install uboot-envtools!"
- return 1
- }
-
- [ ! -r "/etc/fw_env.config" ] && {
- echo "/etc/fw_env.config is missing"
- return 1
- }
-
- local image_size=$( get_filesize "$1" )
- local firmware_size=$( platform_get_firmware_size )
- [ $image_size -ge $firmware_size ] &&
- {
- echo "upgrade image is too big (${image_size}b > ${firmware_size}b)"
- }
-
- local vmlinux_blockoffset=$( platform_get_offset "$1" uImage )
- [ -z $vmlinux_blockoffset ] && {
- echo "vmlinux-uImage not found"
- return 1
- }
-
- local rootfs_blockoffset=$( platform_get_offset "$1" rootfs "$vmlinux_blockoffset" )
- [ -z $rootfs_blockoffset ] && {
- echo "missing rootfs"
- return 1
- }
-
- local data_blockoffset=$( platform_get_offset "$1" rootfs-data "$rootfs_blockoffset" )
- [ -z $data_blockoffset ] && {
- echo "rootfs doesn't have JFFS2 end marker"
- return 1
- }
-
- return 0
-}
-
-platform_do_upgrade_allnet() {
- local firmware_base_addr=$( printf "%d" "$1" )
- local vmlinux_blockoffset=$( platform_get_offset "$2" uImage )
- if [ ! -n "$vmlinux_blockoffset" ]; then
- echo "can't determine uImage offset"
- return 1
- fi
- local rootfs_blockoffset=$( platform_get_offset "$2" rootfs $(( $vmlinux_blockoffset + 1 )) )
- local vmlinux_offset=$(( $vmlinux_blockoffset * $CI_BLKSZ ))
- local vmlinux_addr=$(( $firmware_base_addr + $vmlinux_offset ))
- local vmlinux_hexaddr=0x$( printf "%08x" "$vmlinux_addr" )
- if [ ! -n "$rootfs_blockoffset" ]; then
- echo "can't determine rootfs offset"
- return 1
- fi
- local rootfs_offset=$(( $rootfs_blockoffset * $CI_BLKSZ ))
- local rootfs_addr=$(( $firmware_base_addr + $rootfs_offset ))
- local rootfs_hexaddr=0x$( printf "%08x" "$rootfs_addr" )
- local vmlinux_blockcount=$(( $rootfs_blockoffset - $vmlinux_blockoffset ))
- local vmlinux_size=$(( $rootfs_offset - $vmlinux_offset ))
- local vmlinux_hexsize=0x$( printf "%08x" "$vmlinux_size" )
- local data_blockoffset=$( platform_get_offset "$2" rootfs-data $(( $rootfs_blockoffset + 1 )) )
- if [ ! -n "$data_blockoffset" ]; then
- echo "can't determine rootfs size"
- return 1
- fi
- local data_offset=$(( $data_blockoffset * $CI_BLKSZ ))
- local rootfs_blockcount=$(( $data_blockoffset - $rootfs_blockoffset ))
- local rootfs_size=$(( $data_offset - $rootfs_offset ))
- local rootfs_hexsize=0x$( printf "%08x" "$rootfs_size" )
-
- local rootfs_md5=$( dd if="$2" bs=$CI_BLKSZ skip=$rootfs_blockoffset count=$rootfs_blockcount 2>/dev/null | md5sum -); rootfs_md5="${rootfs_md5%% *}"
- local vmlinux_md5=$( dd if="$2" bs=$CI_BLKSZ skip=$vmlinux_blockoffset count=$vmlinux_blockcount 2>/dev/null | md5sum -); vmlinux_md5="${vmlinux_md5%% *}"
- # this needs a recent version of uboot-envtools!
- cat >/tmp/fw_env_upgrade <<EOF
-vmlinux_start_addr $vmlinux_hexaddr
-vmlinux_size $vmlinux_hexsize
-vmlinux_checksum $vmlinux_md5
-rootfs_start_addr $rootfs_hexaddr
-rootfs_size $rootfs_hexsize
-rootfs_checksum $rootfs_md5
-bootcmd bootm $vmlinux_hexaddr
-EOF
-
- mkdir -p /var/lock
- fw_setenv -s /tmp/fw_env_upgrade || {
- echo "failed to update U-Boot environment"
- return 1
- }
- shift
- default_do_upgrade "$@"
-}
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/dir825.sh b/target/linux/ar71xx/base-files/lib/upgrade/dir825.sh
deleted file mode 100644
index e991a06b7a..0000000000
--- a/target/linux/ar71xx/base-files/lib/upgrade/dir825.sh
+++ /dev/null
@@ -1,165 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2012 OpenWrt.org
-#
-
-. /lib/functions.sh
-. /lib/ar71xx.sh
-
-get_magic_at() {
- local mtddev=$1
- local pos=$2
- dd bs=1 count=2 skip=$pos if=$mtddev 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-dir825b_is_caldata_valid() {
- local mtddev=$1
- local magic
-
- magic=$(get_magic_at $mtddev 4096)
- [ "$magic" != "a55a" ] && return 0
-
- magic=$(get_magic_at $mtddev 20480)
- [ "$magic" != "a55a" ] && return 0
-
- return 1
-}
-
-dir825b_copy_caldata() {
- local cal_src=$1
- local cal_dst=$2
- local mtd_src
- local mtd_dst
- local md5_src
- local md5_dst
-
- mtd_src=$(find_mtd_part $cal_src)
- [ -z "$mtd_src" ] && {
- echo "no $cal_src partition found"
- return 1
- }
-
- mtd_dst=$(find_mtd_part $cal_dst)
- [ -z "$mtd_dst" ] && {
- echo "no $cal_dst partition found"
- return 1
- }
-
- dir825b_is_caldata_valid "$mtd_src" && {
- echo "no valid calibration data found in $cal_src"
- return 1
- }
-
- dir825b_is_caldata_valid "$mtd_dst" && {
- echo "Copying calibration data from $cal_src to $cal_dst..."
- dd if="$mtd_src" 2>/dev/null | mtd -q -q write - "$cal_dst"
- }
-
- md5_src=$(md5sum "$mtd_src") && md5_src="${md5_src%% *}"
- md5_dst=$(md5sum "$mtd_dst") && md5_dst="${md5_dst%% *}"
-
- [ "$md5_src" != "$md5_dst" ] && {
- echo "calibration data mismatch $cal_src:$md5_src $cal_dst:$md5_dst"
- return 1
- }
-
- return 0
-}
-
-dir825b_do_upgrade_combined() {
- local fw_part=$1
- local fw_file=$2
- local fw_mtd=$(find_mtd_part $fw_part)
- local fw_length=0x$(dd if="$fw_file" bs=2 skip=1 count=4 2>/dev/null)
- local fw_blocks=$(($fw_length / 65536))
-
- if [ -n "$fw_mtd" ] && [ ${fw_blocks:-0} -gt 0 ]; then
- local append=""
- [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP"
-
- sync
- dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \
- mtd $append write - "$fw_part"
- fi
-}
-
-dir825b_check_image() {
- local magic="$(get_magic_long "$1")"
- local fw_mtd=$(find_mtd_part "firmware_orig")
-
- case "$magic" in
- "27051956")
- ;;
- "43493030")
- local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null)
- local md5_chk=$(dd if="$1" bs=64k skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}"
- local fw_len=$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
- local fw_part_len=$(mtd_get_part_size "firmware")
-
- if [ -z "$fw_mtd" ]; then
- ask_bool 0 "Do you have a backup of the caldata partition?" || {
- echo "Warning, please make sure that you have a backup of the caldata partition."
- echo "Once you have that, use 'sysupgrade -i' for upgrading to the 'fat' firmware."
- return 1
- }
- fi
-
- if [ -z "$md5_img" -o -z "$md5_chk" ]; then
- echo "Unable to get image checksums. Maybe you are using a streamed image?"
- return 1
- fi
-
- if [ "$md5_img" != "$md5_chk" ]; then
- echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)"
- return 1
- fi
-
- fw_len=$((0x$fw_len))
- fw_part_len=${fw_part_len:-0}
-
- if [ $fw_part_len -lt $fw_len ]; then
- echo "The upgrade image is too big (size:$fw_len available:$fw_part_len)"
- return 1
- fi
- ;;
- *)
- echo "Unsupported image format."
- return 1
- ;;
- esac
-
- return 0
-}
-
-platform_do_upgrade_dir825b() {
- local magic="$(get_magic_long "$1")"
- local fw_mtd=$(find_mtd_part "firmware_orig")
-
- case "$magic" in
- "27051956")
- if [ -n "$fw_mtd" ]; then
- # restore calibration data before downgrading to
- # the normal image
- dir825b_copy_caldata "caldata" "caldata_orig" || {
- echo "unable to restore calibration data"
- exit 1
- }
- PART_NAME="firmware_orig"
- else
- PART_NAME="firmware"
- fi
- default_do_upgrade "$1"
- ;;
- "43493030")
- if [ -z "$fw_mtd" ]; then
- # backup calibration data before upgrading to the
- # fat image
- dir825b_copy_caldata "caldata" "caldata_copy" || {
- echo "unable to backup calibration data"
- exit 1
- }
- fi
- dir825b_do_upgrade_combined "firmware" "$1"
- ;;
- esac
-}
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh b/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh
deleted file mode 100644
index dfc57b23f5..0000000000
--- a/target/linux/ar71xx/base-files/lib/upgrade/merakinand.sh
+++ /dev/null
@@ -1,165 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2015-2016 Chris Blake <chrisrblake93@gmail.com>
-#
-# Custom upgrade script for Meraki NAND devices (ex. MR18)
-# Based on dir825.sh and stock nand functions
-#
-. /lib/ar71xx.sh
-. /lib/functions.sh
-
-get_magic_at() {
- local mtddev=$1
- local pos=$2
- dd bs=1 count=2 skip=$pos if=$mtddev 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-meraki_is_caldata_valid() {
- local board=$1
- local mtddev=$2
- local magic
-
- case "$board" in
- "mr18")
- magic=$(get_magic_at $mtddev 4096)
- [ "$magic" != "0202" ] && return 0
-
- magic=$(get_magic_at $mtddev 20480)
- [ "$magic" != "0202" ] && return 0
-
- magic=$(get_magic_at $mtddev 36864)
- [ "$magic" != "0202" ] && return 0
-
- return 1
- ;;
- "z1")
- magic=$(get_magic_at $mtddev 4096)
- [ "$magic" != "0202" ] && return 0
-
- magic=$(get_magic_at $mtddev 86016)
- [ "$magic" != "a55a" ] && return 0
-
- return 1
- ;;
- *)
- return 1
- ;;
- esac
-}
-
-merakinand_copy_caldata() {
- local cal_src=$1
- local cal_dst=$2
- local ubidev="$(nand_find_ubi $CI_UBIPART)"
- local board_name="$(board_name)"
- local rootfs_size="$(ubinfo /dev/ubi0 -N rootfs_data | grep "Size" | awk '{ print $6 }')"
-
- # Setup partitions using board name, in case of future platforms
- case "$board_name" in
- "mr18"|\
- "z1")
- # Src is MTD
- mtd_src="$(find_mtd_chardev $cal_src)"
- [ -n "$mtd_src" ] || {
- echo "no mtd device found for partition $cal_src"
- exit 1
- }
-
- # Dest is UBI
- # TODO: possibly add create (hard to do when rootfs_data is expanded & mounted)
- # Would need to be done from ramdisk
- mtd_dst="$(nand_find_volume $ubidev $cal_dst)"
- [ -n "$mtd_dst" ] || {
- echo "no ubi device found for partition $cal_dst"
- exit 1
- }
-
- meraki_is_caldata_valid "$board_name" "$mtd_src" && {
- echo "no valid calibration data found in $cal_src"
- exit 1
- }
-
- meraki_is_caldata_valid "$board_name" "/dev/$mtd_dst" && {
- echo "Copying calibration data from $cal_src to $cal_dst..."
- dd if="$mtd_src" of=/tmp/caldata.tmp 2>/dev/null
- ubiupdatevol "/dev/$mtd_dst" /tmp/caldata.tmp
- rm /tmp/caldata.tmp
- sync
- }
- return 0
- ;;
- *)
- echo "Unsupported device $board_name";
- return 1
- ;;
- esac
-}
-
-merakinand_do_kernel_check() {
- local board_name="$1"
- local tar_file="$2"
- local image_magic_word=`(tar xf $tar_file sysupgrade-$board_name/kernel -O 2>/dev/null | dd bs=1 count=4 skip=0 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')`
-
- # What is our kernel magic string?
- case "$board_name" in
- "mr18")
- [ "$image_magic_word" == "8e73ed8a" ] && {
- echo "pass" && return 0
- }
- ;;
- "z1")
- [ "$image_magic_word" == "4d495053" ] && {
- echo "pass" && return 0
- }
- ;;
- esac
-
- exit 1
-}
-
-merakinand_do_platform_check() {
- local board_name="$1"
- local tar_file="$2"
- local control_length=`(tar xf $tar_file sysupgrade-$board_name/CONTROL -O | wc -c) 2> /dev/null`
- local file_type="$(identify_tar $2 sysupgrade-$board_name/root)"
- local kernel_magic="$(merakinand_do_kernel_check $1 $2)"
-
- case "$board_name" in
- "mr18"|\
- "z1")
- [ "$control_length" = 0 -o "$file_type" != "squashfs" -o "$kernel_magic" != "pass" ] && {
- echo "Invalid sysupgrade file for $board_name"
- return 1
- }
- ;;
- *)
- echo "Unsupported device $board_name";
- return 1
- ;;
- esac
-
- return 0
-}
-
-merakinand_do_upgrade() {
- local tar_file="$1"
- local board_name="$(board_name)"
-
- # Do we need to do any platform tweaks?
- case "$board_name" in
- "mr18")
- # Check and create UBI caldata if it's invalid
- merakinand_copy_caldata "odm-caldata" "caldata"
- nand_do_upgrade $1
- ;;
- "z1")
- # Check and create UBI caldata if it's invalid
- merakinand_copy_caldata "origcaldata" "caldata"
- nand_do_upgrade $1
- ;;
- *)
- echo "Unsupported device $board_name";
- exit 1
- ;;
- esac
-}
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh b/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
deleted file mode 100644
index f43bdcea7f..0000000000
--- a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh
+++ /dev/null
@@ -1,232 +0,0 @@
-# The U-Boot loader of the OpenMesh devices requires image sizes and
-# checksums to be provided in the U-Boot environment.
-# The OpenMesh devices come with 2 main partitions - while one is active
-# sysupgrade will flash the other. The boot order is changed to boot the
-# newly flashed partition. If the new partition can't be booted due to
-# upgrade failures the previously used partition is loaded.
-
-trim()
-{
- echo $1
-}
-
-cfg_value_get()
-{
- local cfg=$1 cfg_opt
- local section=$2 our_section=0
- local param=$3 our_param=
-
- for cfg_opt in $cfg
- do
- [ "$cfg_opt" = "[$section]" ] && our_section=1 && continue
- [ "$our_section" = "1" ] || continue
-
- our_param=$(echo ${cfg_opt%%=*})
- [ "$param" = "$our_param" ] && echo ${cfg_opt##*=} && break
- done
-}
-
-platform_check_image_target_openmesh()
-{
- img_board_target="$1"
-
- case "$img_board_target" in
- A60)
- [ "$board" = "a40" ] && return 0
- [ "$board" = "a60" ] && return 0
- echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
- return 1
- ;;
- OM2P)
- [ "$board" = "om2p" ] && return 0
- [ "$board" = "om2pv2" ] && return 0
- [ "$board" = "om2pv4" ] && return 0
- [ "$board" = "om2p-lc" ] && return 0
- [ "$board" = "om2p-hs" ] && return 0
- [ "$board" = "om2p-hsv2" ] && return 0
- [ "$board" = "om2p-hsv3" ] && return 0
- [ "$board" = "om2p-hsv4" ] && return 0
- echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
- return 1
- ;;
- OM5P)
- [ "$board" = "om5p" ] && return 0
- [ "$board" = "om5p-an" ] && return 0
- echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
- return 1
- ;;
- OM5PAC)
- [ "$board" = "om5p-ac" ] && return 0
- [ "$board" = "om5p-acv2" ] && return 0
- echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
- return 1
- ;;
- MR1750)
- [ "$board" = "mr1750" ] && return 0
- [ "$board" = "mr1750v2" ] && return 0
- echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
- return 1
- ;;
- MR600)
- [ "$board" = "mr600" ] && return 0
- [ "$board" = "mr600v2" ] && return 0
- echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
- return 1
- ;;
- MR900)
- [ "$board" = "mr900" ] && return 0
- [ "$board" = "mr900v2" ] && return 0
- echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform"
- return 1
- ;;
- *)
- echo "Invalid board target ($img_board_target). Use the correct image for this platform"
- return 1
- ;;
- esac
-}
-
-platform_check_image_openmesh()
-{
- local img_magic=$1
- local img_path=$2
- local fw_printenv=/usr/sbin/fw_printenv
- local img_board_target= img_num_files= i=0
- local cfg_name= kernel_name= rootfs_name=
-
- case "$img_magic" in
- # Combined Extended Image v1
- 43453031)
- img_board_target=$(trim $(dd if="$img_path" bs=4 skip=1 count=8 2>/dev/null))
- img_num_files=$(trim $(dd if="$img_path" bs=2 skip=18 count=1 2>/dev/null))
- ;;
- *)
- echo "Invalid image ($img_magic). Use combined extended images on this platform"
- return 1
- ;;
- esac
-
- platform_check_image_target_openmesh "$img_board_target" || return 1
-
- [ $img_num_files -lt 3 ] && {
- echo "Invalid number of embedded images ($img_num_files). Use the correct image for this platform"
- return 1
- }
-
- cfg_name=$(trim $(dd if="$img_path" bs=2 skip=19 count=16 2>/dev/null))
-
- [ "$cfg_name" != "fwupgrade.cfg" ] && {
- echo "Invalid embedded config file ($cfg_name). Use the correct image for this platform"
- return 1
- }
-
- kernel_name=$(trim $(dd if="$img_path" bs=2 skip=55 count=16 2>/dev/null))
-
- [ "$kernel_name" != "kernel" ] && {
- echo "Invalid embedded kernel file ($kernel_name). Use the correct image for this platform"
- return 1
- }
-
- rootfs_name=$(trim $(dd if="$img_path" bs=2 skip=91 count=16 2>/dev/null))
-
- [ "$rootfs_name" != "rootfs" ] && {
- echo "Invalid embedded kernel file ($rootfs_name). Use the correct image for this platform"
- return 1
- }
-
- [ ! -x "$fw_printenv" ] && {
- echo "Please install uboot-envtools!"
- return 1
- }
-
- [ ! -r "/etc/fw_env.config" ] && {
- echo "/etc/fw_env.config is missing"
- return 1
- }
-
- return 0
-}
-
-platform_do_upgrade_openmesh()
-{
- local img_path=$1 img_board_target=
- local kernel_start_addr= kernel_start_addr1= kernel_start_addr2=
- local kernel_size= kernel_md5=
- local rootfs_size= rootfs_checksize= rootfs_md5=
- local kernel_bsize= total_size=
- local data_offset=$((64 * 1024)) block_size= offset=
- local uboot_env_upgrade="/tmp/fw_env_upgrade"
- local cfg_size= kernel_size= rootfs_size=
- local append=""
-
- [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP"
-
- cfg_size=$(dd if="$img_path" bs=2 skip=35 count=4 2>/dev/null)
- kernel_size=$(dd if="$img_path" bs=2 skip=71 count=4 2>/dev/null)
- rootfs_size=$(dd if="$img_path" bs=2 skip=107 count=4 2>/dev/null)
-
- img_board_target=$(trim $(dd if="$img_path" bs=4 skip=1 count=8 2>/dev/null))
- cfg_content=$(dd if="$img_path" bs=1 skip=$data_offset count=$(echo $((0x$cfg_size))) 2>/dev/null)
-
- case $img_board_target in
- OM2P)
- block_size=$((256 * 1024))
- total_size=7340032
- kernel_start_addr1=0x9f1c0000
- kernel_start_addr2=0x9f8c0000
- ;;
- OM5P|OM5PAC|MR600|MR900|MR1750|A60)
- block_size=$((64 * 1024))
- total_size=7995392
- kernel_start_addr1=0x9f0b0000
- kernel_start_addr2=0x9f850000
- ;;
- esac
-
- kernel_md5=$(cfg_value_get "$cfg_content" "vmlinux" "md5sum")
- rootfs_md5=$(cfg_value_get "$cfg_content" "rootfs" "md5sum")
- rootfs_checksize=$(cfg_value_get "$cfg_content" "rootfs" "checksize")
-
- if [ "$((0x$kernel_size % $block_size))" = "0" ]
- then
- kernel_bsize=$(echo $((0x$kernel_size)))
- else
- kernel_bsize=$((0x$kernel_size + ($block_size - (0x$kernel_size % $block_size))))
- fi
-
- mtd -q erase inactive
-
- offset=$(echo $(($data_offset + 0x$cfg_size + 0x$kernel_size)))
- dd if="$img_path" bs=1 skip=$offset count=$(echo $((0x$rootfs_size))) 2>&- | mtd -n -p $kernel_bsize $append write - "inactive"
-
- offset=$(echo $(($data_offset + 0x$cfg_size)))
- dd if="$img_path" bs=1 skip=$offset count=$(echo $((0x$kernel_size))) 2>&- | mtd -n write - "inactive"
-
- rm $uboot_env_upgrade 2>&-
-
- if [ "$(grep 'mtd3:.*inactive' /proc/mtd)" ]
- then
- printf "kernel_size_1 %u\n" $(($kernel_bsize / 1024)) >> $uboot_env_upgrade
- printf "rootfs_size_1 %u\n" $((($total_size - $kernel_bsize) / 1024)) >> $uboot_env_upgrade
- printf "bootseq 1,2\n" >> $uboot_env_upgrade
- kernel_start_addr=$kernel_start_addr1
- else
- printf "kernel_size_2 %u\n" $(($kernel_bsize / 1024)) >> $uboot_env_upgrade
- printf "rootfs_size_2 %u\n" $((($total_size - $kernel_bsize) / 1024)) >> $uboot_env_upgrade
- printf "bootseq 2,1\n" >> $uboot_env_upgrade
- kernel_start_addr=$kernel_start_addr2
- fi
-
- printf "vmlinux_start_addr %s\n" $kernel_start_addr >> $uboot_env_upgrade
- printf "vmlinux_size 0x%s\n" $kernel_size >> $uboot_env_upgrade
- printf "vmlinux_checksum %s\n" $kernel_md5 >> $uboot_env_upgrade
- printf "rootfs_start_addr 0x%x\n" $(($kernel_start_addr + $kernel_bsize)) >> $uboot_env_upgrade
- printf "rootfs_size %s\n" $rootfs_checksize >> $uboot_env_upgrade
- printf "rootfs_checksum %s\n" $rootfs_md5 >> $uboot_env_upgrade
-
- mkdir -p /var/lock
- fw_setenv -s $uboot_env_upgrade || {
- echo "failed to update U-Boot environment"
- return 1
- }
-}
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
deleted file mode 100755
index 2391a1de8a..0000000000
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,915 +0,0 @@
-#
-# Copyright (C) 2011 OpenWrt.org
-#
-
-. /lib/functions/system.sh
-. /lib/ar71xx.sh
-
-PART_NAME=firmware
-RAMFS_COPY_DATA='/lib/ar71xx.sh /etc/fw_env.config /var/lock/fw_printenv.lock'
-RAMFS_COPY_BIN='nandwrite fw_printenv fw_setenv'
-
-CI_BLKSZ=65536
-CI_LDADR=0x80060000
-
-PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0
-
-platform_find_partitions() {
- local first dev size erasesize name
- while read dev size erasesize name; do
- name=${name#'"'}; name=${name%'"'}
- case "$name" in
- vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin|rootfs|filesystem)
- if [ -z "$first" ]; then
- first="$name"
- else
- echo "$erasesize:$first:$name"
- break
- fi
- ;;
- esac
- done < /proc/mtd
-}
-
-platform_find_kernelpart() {
- local part
- for part in "${1%:*}" "${1#*:}"; do
- case "$part" in
- vmlinux.bin.l7|vmlinux|kernel|linux|linux.bin)
- echo "$part"
- break
- ;;
- esac
- done
-}
-
-platform_find_rootfspart() {
- local part
- for part in "${1%:*}" "${1#*:}"; do
- [ "$part" != "$2" ] && echo "$part" && break
- done
-}
-
-platform_do_upgrade_combined() {
- local partitions=$(platform_find_partitions)
- local kernelpart=$(platform_find_kernelpart "${partitions#*:}")
- local erase_size=$((0x${partitions%%:*})); partitions="${partitions#*:}"
- local kern_length=0x$(dd if="$1" bs=2 skip=1 count=4 2>/dev/null)
- local kern_blocks=$(($kern_length / $CI_BLKSZ))
- local root_blocks=$((0x$(dd if="$1" bs=2 skip=5 count=4 2>/dev/null) / $CI_BLKSZ))
-
- if [ -n "$partitions" ] && [ -n "$kernelpart" ] && \
- [ ${kern_blocks:-0} -gt 0 ] && \
- [ ${root_blocks:-0} -gt 0 ] && \
- [ ${erase_size:-0} -gt 0 ];
- then
- local rootfspart=$(platform_find_rootfspart "$partitions" "$kernelpart")
- local append=""
- [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP"
-
- if [ "$PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD" -ne 1 ]; then
- ( dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null; \
- dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null ) | \
- mtd -r $append -F$kernelpart:$kern_length:$CI_LDADR,rootfs write - $partitions
- elif [ -n "$rootfspart" ]; then
- dd if="$1" bs=$CI_BLKSZ skip=1 count=$kern_blocks 2>/dev/null | \
- mtd write - $kernelpart
- dd if="$1" bs=$CI_BLKSZ skip=$((1+$kern_blocks)) count=$root_blocks 2>/dev/null | \
- mtd -r $append write - $rootfspart
- fi
- fi
- PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=0
-}
-
-tplink_get_image_hwid() {
- get_image "$@" | dd bs=4 count=1 skip=16 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-tplink_get_image_mid() {
- get_image "$@" | dd bs=4 count=1 skip=17 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-tplink_get_image_boot_size() {
- get_image "$@" | dd bs=4 count=1 skip=37 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-tplink_pharos_check_support_list() {
- local image="$1"
- local offset="$2"
- local model="$3"
- local trargs="$4"
-
- # Here $image is given to dd directly instead of using get_image;
- # otherwise the skip will take almost a second (as dd can't seek)
- dd if="$image" bs=1 skip=$offset count=1024 2>/dev/null | tr -d "$trargs" | (
- while IFS= read -r line; do
- [ "$line" = "$model" ] && exit 0
- done
-
- exit 1
- )
-}
-
-tplink_pharos_check_image() {
- local image_magic="$(get_magic_long "$1")"
- local board_magic="$2"
- [ "$image_magic" != "$board_magic" ] && {
- echo "Invalid image magic '$image_magic'. Expected '$board_magic'."
- return 1
- }
-
- local model_string="$3"
- local trargs="$4"
-
- # New images have the support list at 7802888, old ones at 1511432
- tplink_pharos_check_support_list "$1" 7802888 "$model_string" "$trargs" || \
- tplink_pharos_check_support_list "$1" 1511432 "$model_string" "$trargs" || {
- echo "Unsupported image (model not in support-list)"
- return 1
- }
-
- return 0
-}
-
-seama_get_type_magic() {
- get_image "$@" | dd bs=1 count=4 skip=53 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-wrgg_get_image_magic() {
- get_image "$@" | dd bs=4 count=1 skip=8 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"'
-}
-
-cybertan_get_image_magic() {
- get_image "$@" | dd bs=8 count=1 skip=0 2>/dev/null | hexdump -v -n 8 -e '1/1 "%02x"'
-}
-
-cybertan_check_image() {
- local magic="$(cybertan_get_image_magic "$1")"
- local fw_magic="$(cybertan_get_hw_magic)"
-
- [ "$fw_magic" != "$magic" ] && {
- echo "Invalid image, ID mismatch, got:$magic, but need:$fw_magic"
- return 1
- }
-
- return 0
-}
-
-platform_do_upgrade_compex() {
- local fw_file=$1
- local fw_part=$PART_NAME
- local fw_mtd=$(find_mtd_part $fw_part)
- local fw_length=0x$(dd if="$fw_file" bs=2 skip=1 count=4 2>/dev/null)
- local fw_blocks=$(($fw_length / 65536))
-
- if [ -n "$fw_mtd" ] && [ ${fw_blocks:-0} -gt 0 ]; then
- local append=""
- [ -f "$UPGRADE_BACKUP" ] && append="-j $UPGRADE_BACKUP"
-
- sync
- dd if="$fw_file" bs=64k skip=1 count=$fw_blocks 2>/dev/null | \
- mtd $append write - "$fw_part"
- fi
-}
-
-alfa_check_image() {
- local magic_long="$(get_magic_long "$1")"
- local fw_part_size=$(mtd_get_part_size firmware)
-
- case "$magic_long" in
- "27051956")
- [ "$fw_part_size" != "16318464" ] && {
- echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes"
- return 1
- }
- ;;
- "68737173")
- [ "$fw_part_size" != "7929856" ] && {
- echo "Invalid image magic \"$magic_long\" for $fw_part_size bytes"
- return 1
- }
- ;;
- esac
-
- return 0
-}
-
-platform_check_image() {
- local board=$(board_name)
- local magic="$(get_magic_word "$1")"
- local magic_long="$(get_magic_long "$1")"
-
- [ "$#" -gt 1 ] && return 1
-
- case "$board" in
- airgateway|\
- airgatewaypro|\
- airrouter|\
- ap121f|\
- ap132|\
- ap531b0|\
- ap90q|\
- archer-c25-v1|\
- archer-c58-v1|\
- archer-c59-v1|\
- archer-c59-v2|\
- archer-c60-v1|\
- archer-c60-v2|\
- archer-c7-v4|\
- archer-c7-v5|\
- arduino-yun|\
- bullet-m|\
- bullet-m-xw|\
- c-55|\
- carambola2|\
- cf-e316n-v2|\
- cf-e320n-v2|\
- cf-e355ac-v1|\
- cf-e355ac-v2|\
- cf-e375ac|\
- cf-e380ac-v1|\
- cf-e380ac-v2|\
- cf-e385ac|\
- cf-e520n|\
- cf-e530n|\
- cpe505n|\
- cpe830|\
- cpe870|\
- dap-1330-a1|\
- dgl-5500-a1|\
- dhp-1565-a1|\
- dir-505-a1|\
- dir-600-a1|\
- dir-615-c1|\
- dir-615-e1|\
- dir-615-e4|\
- dir-615-i1|\
- dir-825-c1|\
- dir-835-a1|\
- dlan-hotspot|\
- dlan-pro-1200-ac|\
- dlan-pro-500-wp|\
- dr342|\
- dr531|\
- dragino2|\
- e1700ac-v2|\
- e558-v2|\
- e600g-v2|\
- e600gac-v2|\
- e750a-v4|\
- e750g-v8|\
- ebr-2310-c1|\
- ens202ext|\
- epg5000|\
- esr1750|\
- esr900|\
- ew-balin|\
- ew-dorin|\
- ew-dorin-router|\
- gl-ar150|\
- gl-ar300m|\
- gl-ar300|\
- gl-ar750|\
- gl-ar750s|\
- gl-domino|\
- gl-mifi|\
- gl-usb150|\
- hiwifi-hc6361|\
- hornet-ub-x2|\
- jwap230|\
- lbe-m5|\
- lima|\
- loco-m-xw|\
- mzk-w04nu|\
- mzk-w300nh|\
- n5q|\
- nanostation-m|\
- nanostation-m-xw|\
- nbg460n_550n_550nh|\
- pqi-air-pen|\
- r36a|\
- r602n|\
- rme-eg200|\
- rocket-m|\
- rocket-m-ti|\
- rocket-m-xw|\
- rw2458n|\
- sc1750|\
- sc300m|\
- sc450|\
- sr3200|\
- t830|\
- tew-632brp|\
- tew-712br|\
- tew-732br|\
- tew-823dru|\
- tl-wr1043n-v5|\
- tl-wr942n-v1|\
- unifi|\
- unifi-outdoor|\
- unifiac-lite|\
- unifiac-pro|\
- wam250|\
- weio|\
- whr-g301n|\
- whr-hp-g300n|\
- whr-hp-gn|\
- wlae-ag300n|\
- wndap360|\
- wpj342|\
- wpj344|\
- wpj531|\
- wpj558|\
- wpj563|\
- wrt400n|\
- wrtnode2q|\
- wzr-450hp2|\
- wzr-hp-ag300h|\
- wzr-hp-g300nh|\
- wzr-hp-g300nh2|\
- wzr-hp-g450h|\
- xd3200)
- [ "$magic" != "2705" ] && {
- echo "Invalid image type."
- return 1
- }
-
- return 0
- ;;
- alfa-ap96|\
- alfa-nx|\
- ap121|\
- ap121-mini|\
- ap135-020|\
- ap136-010|\
- ap136-020|\
- ap147-010|\
- ap152|\
- ap91-5g|\
- ap96|\
- bhr-4grv2|\
- bxu2000n-2-a1|\
- db120|\
- dr344|\
- dw33d|\
- f9k1115v2|\
- hornet-ub|\
- mr12|\
- mr16|\
- zbt-we1526|\
- zcn-1523h-2|\
- zcn-1523h-5)
- [ "$magic_long" != "68737173" -a "$magic_long" != "19852003" ] && {
- echo "Invalid image type."
- return 1
- }
-
- return 0
- ;;
- all0258n|\
- all0315n|\
- cap324|\
- cap4200ag|\
- cr3000|\
- cr5000)
- platform_check_image_allnet "$1" && return 0
- return 1
- ;;
- all0305|\
- eap300v2|\
- eap7660d|\
- ja76pf|\
- ja76pf2|\
- jwap003|\
- ls-sr71|\
- pb42|\
- pb44|\
- routerstation|\
- routerstation-pro|\
- wp543|\
- wpe72)
- [ "$magic" != "4349" ] && {
- echo "Invalid image. Use *-sysupgrade.bin files on this board"
- return 1
- }
-
- local md5_img=$(dd if="$1" bs=2 skip=9 count=16 2>/dev/null)
- local md5_chk=$(fwtool -q -t -i /dev/null "$1"; dd if="$1" bs=$CI_BLKSZ skip=1 2>/dev/null | md5sum -); md5_chk="${md5_chk%% *}"
-
- if [ -n "$md5_img" -a -n "$md5_chk" ] && [ "$md5_img" = "$md5_chk" ]; then
- return 0
- else
- echo "Invalid image. Contents do not match checksum (image:$md5_img calculated:$md5_chk)"
- return 1
- fi
-
- return 0
- ;;
- antminer-s1|\
- antminer-s3|\
- antrouter-r1|\
- archer-c5|\
- archer-c7|\
- el-m150|\
- el-mini|\
- gl-inet|\
- lan-turtle|\
- mc-mac1200r|\
- minibox-v1|\
- minibox-v3.2|\
- omy-g1|\
- omy-x1|\
- onion-omega|\
- oolite-v1|\
- oolite-v5.2|\
- oolite-v5.2-dev|\
- packet-squirrel|\
- re355|\
- re450|\
- rut900|\
- smart-300|\
- som9331|\
- tellstick-znet-lite|\
- tl-mr10u|\
- tl-mr11u|\
- tl-mr12u|\
- tl-mr13u|\
- tl-mr3020|\
- tl-mr3040|\
- tl-mr3040-v2|\
- tl-mr3220|\
- tl-mr3220-v2|\
- tl-mr3420|\
- tl-mr3420-v2|\
- tl-mr6400|\
- tl-wa701nd-v2|\
- tl-wa7210n-v2|\
- tl-wa750re|\
- tl-wa7510n|\
- tl-wa801nd-v2|\
- tl-wa801nd-v3|\
- tl-wa830re-v2|\
- tl-wa850re|\
- tl-wa850re-v2|\
- tl-wa855re-v1|\
- tl-wa860re|\
- tl-wa901nd|\
- tl-wa901nd-v2|\
- tl-wa901nd-v3|\
- tl-wa901nd-v4|\
- tl-wa901nd-v5|\
- tl-wdr3320-v2|\
- tl-wdr3500|\
- tl-wdr4300|\
- tl-wdr4900-v2|\
- tl-wdr6500-v2|\
- tl-wpa8630|\
- tl-wr1041n-v2|\
- tl-wr1043nd|\
- tl-wr1043nd-v2|\
- tl-wr1043nd-v4|\
- tl-wr2543n|\
- tl-wr703n|\
- tl-wr710n|\
- tl-wr720n-v3|\
- tl-wr740n-v6|\
- tl-wr741nd|\
- tl-wr741nd-v4|\
- tl-wr802n-v1|\
- tl-wr802n-v2|\
- tl-wr810n|\
- tl-wr810n-v2|\
- tl-wr840n-v2|\
- tl-wr840n-v3|\
- tl-wr841n-v1|\
- tl-wr841n-v7|\
- tl-wr841n-v8|\
- tl-wr841n-v9|\
- tl-wr841n-v11|\
- tl-wr842n-v2|\
- tl-wr842n-v3|\
- tl-wr902ac-v1|\
- tl-wr940n-v4|\
- tl-wr940n-v6|\
- tl-wr941nd|\
- tl-wr941nd-v5|\
- tl-wr941nd-v6|\
- ts-d084|\
- wifi-pineapple-nano)
- local magic_ver="0100"
-
- case "$board" in
- tl-wdr3320-v2|tl-wdr6500-v2)
- magic_ver="0200"
- ;;
- esac
-
- [ "$magic" != "$magic_ver" ] && {
- echo "Invalid image type."
- return 1
- }
-
- local hwid
- local mid
- local imagehwid
- local imagemid
-
- hwid=$(tplink_get_hwid)
- mid=$(tplink_get_mid)
- imagehwid=$(tplink_get_image_hwid "$1")
- imagemid=$(tplink_get_image_mid "$1")
-
- [ "$hwid" != "$imagehwid" -o "$mid" != "$imagemid" ] && {
- echo "Invalid image, hardware ID mismatch, hw:$hwid $mid image:$imagehwid $imagemid."
- return 1
- }
-
- local boot_size
-
- boot_size=$(tplink_get_image_boot_size "$1")
- [ "$boot_size" != "00000000" ] && {
- echo "Invalid image, it contains a bootloader."
- return 1
- }
-
- return 0
- ;;
- bsb|\
- dir-825-b1|\
- tew-673gru)
- dir825b_check_image "$1" && return 0
- ;;
- rb-411|\
- rb-411u|\
- rb-433|\
- rb-433u|\
- rb-435g|\
- rb-450|\
- rb-450g|\
- rb-493|\
- rb-493g|\
- rb-750|\
- rb-750gl|\
- rb-751|\
- rb-751g|\
- rb-911g-2hpnd|\
- rb-911g-5hpnd|\
- rb-911g-5hpacd|\
- rb-912uag-2hpnd|\
- rb-912uag-5hpnd|\
- rb-921gs-5hpacd-r2|\
- rb-922uags-5hpacd|\
- rb-951g-2hnd|\
- rb-951ui-2hnd|\
- rb-2011l|\
- rb-2011il|\
- rb-2011ils|\
- rb-2011uas|\
- rb-2011uas-2hnd|\
- rb-2011uias|\
- rb-2011uias-2hnd|\
- rb-2011uias-2hnd-r2|\
- rb-sxt2n|\
- rb-sxt5n)
- nand_do_platform_check routerboard $1
- return $?
- ;;
- c-60|\
- hiveap-121|\
- nbg6716|\
- r6100|\
- rambutan|\
- wi2a-ac200i|\
- wndr3700v4|\
- wndr4300)
- nand_do_platform_check $board $1
- return $?
- ;;
- cpe210|\
- cpe510|\
- eap120|\
- wbs210|\
- wbs510)
- tplink_pharos_check_image "$1" "7f454c46" "$(tplink_pharos_get_model_string)" '' && return 0
- return 1
- ;;
- cpe210-v2|\
- cpe210-v3)
- tplink_pharos_check_image "$1" "01000000" "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0
- return 1
- ;;
- cpe510-v2)
- tplink_pharos_check_image "$1" "7f454c46" "$(tplink_pharos_v2_get_model_string)" '\0\xff\r' && return 0
- return 1
- ;;
- a40|\
- a60|\
- mr1750|\
- mr1750v2|\
- mr600|\
- mr600v2|\
- mr900|\
- mr900v2|\
- om2p|\
- om2p-hs|\
- om2p-hsv2|\
- om2p-hsv3|\
- om2p-hsv4|\
- om2p-lc|\
- om2pv2|\
- om2pv4|\
- om5p|\
- om5p-ac|\
- om5p-acv2|\
- om5p-an)
- platform_check_image_openmesh "$magic_long" "$1" && return 0
- return 1
- ;;
- mr18|\
- z1)
- merakinand_do_platform_check $board $1
- return $?
- ;;
- dir-869-a1|\
- mynet-n600|\
- mynet-n750|\
- qihoo-c301)
- [ "$magic_long" != "5ea3a417" ] && {
- echo "Invalid image, bad magic: $magic_long"
- return 1
- }
-
- local typemagic=$(seama_get_type_magic "$1")
- [ "$typemagic" != "6669726d" ] && {
- echo "Invalid image, bad type: $typemagic"
- return 1
- }
-
- return 0
- ;;
- e2100l|\
- mynet-rext|\
- wrt160nl)
- cybertan_check_image "$1" && return 0
- return 1
- ;;
- nbg6616|\
- uap-pro|\
- unifi-outdoor-plus)
- [ "$magic_long" != "19852003" ] && {
- echo "Invalid image type."
- return 1
- }
-
- return 0
- ;;
- tube2h)
- alfa_check_image "$1" && return 0
- return 1
- ;;
- wndr3700|\
- wnr1000-v2|\
- wnr2000-v3|\
- wnr612-v2|\
- wpn824n)
- local hw_magic
-
- hw_magic="$(ar71xx_get_mtd_part_magic firmware)"
- [ "$magic_long" != "$hw_magic" ] && {
- echo "Invalid image, hardware ID mismatch, hw:$hw_magic image:$magic_long."
- return 1
- }
-
- return 0
- ;;
- wnr2000-v4)
- [ "$magic_long" != "32303034" ] && {
- echo "Invalid image type."
- return 1
- }
-
- return 0
- ;;
- wnr2200)
- [ "$magic_long" != "32323030" ] && {
- echo "Invalid image type."
- return 1
- }
-
- return 0
- ;;
- dap-2695-a1)
- local magic=$(wrgg_get_image_magic "$1")
- [ "$magic" != "21030820" ] && {
- echo "Invalid image, bad type: $magic"
- return 1
- }
-
- return 0;
- ;;
- # these boards use metadata images
- fritz300e|\
- fritz4020|\
- fritz450e|\
- koala|\
- rb-750-r2|\
- rb-750p-pbr2|\
- rb-750up-r2|\
- rb-911-2hn|\
- rb-911-5hn|\
- rb-931-2nd|\
- rb-941-2nd|\
- rb-951ui-2nd|\
- rb-952ui-5ac2nd|\
- rb-962uigs-5hact2hnt|\
- rb-lhg-5nd|\
- rb-map-2nd|\
- rb-mapl-2nd|\
- rb-sxt-2nd-r3|\
- rb-wap-2nd|\
- rb-wapg-5hact2hnd|\
- rb-wapr-2nd)
- return 0
- ;;
- esac
-
- echo "Sysupgrade is not yet supported on $board."
- return 1
-}
-
-platform_do_upgrade_mikrotik_rb() {
- CI_KERNPART=none
- local fw_mtd=$(find_mtd_part kernel)
- fw_mtd="${fw_mtd/block/}"
- [ -n "$fw_mtd" ] || return
-
- local board_dir=$(tar tf "$1" | grep -m 1 '^sysupgrade-.*/$')
- board_dir=${board_dir%/}
- [ -n "$board_dir" ] || return
-
- mtd erase kernel
- tar xf "$1" ${board_dir}/kernel -O | nandwrite -o "$fw_mtd" -
-
- nand_do_upgrade "$1"
-}
-
-platform_do_upgrade_nokia() {
- case "$(fw_printenv -n dualPartition)" in
- imgA)
- fw_setenv dualPartition imgB
- fw_setenv ActImg NokiaImageB
- ;;
- imgB)
- fw_setenv dualPartition imgA
- fw_setenv ActImg NokiaImageA
- ;;
- esac
- ubiblock -r /dev/ubiblock0_0 2>/dev/null >/dev/null
- rm -f /dev/ubiblock0_0
- ubidetach -d 0 2>/dev/null >/dev/null
- CI_UBIPART=ubi_alt
- CI_KERNPART=kernel_alt
-
- nand_do_upgrade "$1"
-}
-
-platform_do_upgrade() {
- local board=$(board_name)
-
- case "$board" in
- rb-750-r2|\
- rb-750p-pbr2|\
- rb-750up-r2|\
- rb-911-2hn|\
- rb-911-5hn|\
- rb-931-2nd|\
- rb-941-2nd|\
- rb-951ui-2nd|\
- rb-952ui-5ac2nd|\
- rb-962uigs-5hact2hnt|\
- rb-lhg-5nd|\
- rb-map-2nd|\
- rb-mapl-2nd|\
- rb-sxt-2nd-r3|\
- rb-wap-2nd|\
- rb-wapg-5hact2hnd|\
- rb-wapr-2nd)
- # erase firmware if booted from initramfs
- [ -z "$(rootfs_type)" ] && mtd erase firmware
- ;;
- esac
-
- case "$board" in
- all0258n)
- platform_do_upgrade_allnet "0x9f050000" "$1"
- ;;
- all0305|\
- eap7660d|\
- ja76pf|\
- ja76pf2|\
- jwap003|\
- ls-sr71|\
- pb42|\
- pb44|\
- routerstation|\
- routerstation-pro)
- platform_do_upgrade_combined "$1"
- ;;
- all0315n)
- platform_do_upgrade_allnet "0x9f080000" "$1"
- ;;
- cap4200ag|\
- eap300v2|\
- ens202ext)
- platform_do_upgrade_allnet "0xbf0a0000" "$1"
- ;;
- dir-825-b1|\
- tew-673gru)
- platform_do_upgrade_dir825b "$1"
- ;;
- a40|\
- a60|\
- mr1750|\
- mr1750v2|\
- mr600|\
- mr600v2|\
- mr900|\
- mr900v2|\
- om2p|\
- om2p-hs|\
- om2p-hsv2|\
- om2p-hsv3|\
- om2p-hsv4|\
- om2p-lc|\
- om2pv2|\
- om2pv4|\
- om5p|\
- om5p-ac|\
- om5p-acv2|\
- om5p-an)
- platform_do_upgrade_openmesh "$1"
- ;;
- c-60|\
- hiveap-121|\
- nbg6716|\
- r6100|\
- rambutan|\
- wndr3700v4|\
- wndr4300)
- nand_do_upgrade "$1"
- ;;
- mr18|\
- z1)
- merakinand_do_upgrade "$1"
- ;;
- rb-411|\
- rb-411u|\
- rb-433|\
- rb-433u|\
- rb-435g|\
- rb-450|\
- rb-450g|\
- rb-493|\
- rb-493g|\
- rb-750|\
- rb-750gl|\
- rb-751|\
- rb-751g|\
- rb-911g-2hpnd|\
- rb-911g-5hpacd|\
- rb-911g-5hpnd|\
- rb-912uag-2hpnd|\
- rb-912uag-5hpnd|\
- rb-921gs-5hpacd-r2|\
- rb-922uags-5hpacd|\
- rb-951g-2hnd|\
- rb-951ui-2hnd|\
- rb-2011il|\
- rb-2011ils|\
- rb-2011l|\
- rb-2011uas|\
- rb-2011uas-2hnd|\
- rb-2011uias|\
- rb-2011uias-2hnd|\
- rb-2011uias-2hnd-r2|\
- rb-sxt2n|\
- rb-sxt5n)
- platform_do_upgrade_mikrotik_rb "$1"
- ;;
- uap-pro|\
- unifi-outdoor-plus)
- MTD_CONFIG_ARGS="-s 0x180000"
- default_do_upgrade "$1"
- ;;
- wi2a-ac200i)
- platform_do_upgrade_nokia "$1"
- ;;
- wp543|\
- wpe72)
- platform_do_upgrade_compex "$1"
- ;;
- *)
- default_do_upgrade "$1"
- ;;
- esac
-}
diff --git a/target/linux/ar71xx/config-4.14 b/target/linux/ar71xx/config-4.14
deleted file mode 100644
index 147be5e2d2..0000000000
--- a/target/linux/ar71xx/config-4.14
+++ /dev/null
@@ -1,485 +0,0 @@
-CONFIG_AG71XX=y
-CONFIG_AG71XX_AR8216_SUPPORT=y
-# CONFIG_AG71XX_DEBUG is not set
-# CONFIG_AG71XX_DEBUG_FS is not set
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-# CONFIG_ARCH_HAS_SG_CHAIN is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_AT803X_PHY=y
-CONFIG_ATH79=y
-# CONFIG_ATH79_DEV_AP9X_PCI is not set
-# CONFIG_ATH79_DEV_DSA is not set
-# CONFIG_ATH79_DEV_ETH is not set
-# CONFIG_ATH79_DEV_GPIO_BUTTONS is not set
-# CONFIG_ATH79_DEV_LEDS_GPIO is not set
-# CONFIG_ATH79_DEV_M25P80 is not set
-# CONFIG_ATH79_DEV_SPI is not set
-# CONFIG_ATH79_DEV_USB is not set
-# CONFIG_ATH79_MACH_A60 is not set
-# CONFIG_ATH79_MACH_ALFA_AP120C is not set
-# CONFIG_ATH79_MACH_ALFA_AP96 is not set
-# CONFIG_ATH79_MACH_ALFA_NX is not set
-# CONFIG_ATH79_MACH_ALL0258N is not set
-# CONFIG_ATH79_MACH_ALL0315N is not set
-# CONFIG_ATH79_MACH_ANTMINER_S1 is not set
-# CONFIG_ATH79_MACH_ANTMINER_S3 is not set
-# CONFIG_ATH79_MACH_ANTROUTER_R1 is not set
-# CONFIG_ATH79_MACH_AP121 is not set
-# CONFIG_ATH79_MACH_AP121F is not set
-# CONFIG_ATH79_MACH_AP132 is not set
-# CONFIG_ATH79_MACH_AP136 is not set
-# CONFIG_ATH79_MACH_AP143 is not set
-# CONFIG_ATH79_MACH_AP147 is not set
-# CONFIG_ATH79_MACH_AP152 is not set
-# CONFIG_ATH79_MACH_AP531B0 is not set
-# CONFIG_ATH79_MACH_AP81 is not set
-# CONFIG_ATH79_MACH_AP90Q is not set
-# CONFIG_ATH79_MACH_AP91_5G is not set
-# CONFIG_ATH79_MACH_AP96 is not set
-# CONFIG_ATH79_MACH_ARCHER_C25_V1 is not set
-# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
-# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
-# CONFIG_ATH79_MACH_ARCHER_C59_V2 is not set
-# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
-# CONFIG_ATH79_MACH_ARCHER_C60_V2 is not set
-# CONFIG_ATH79_MACH_ARCHER_C7 is not set
-# CONFIG_ATH79_MACH_ARDUINO_YUN is not set
-# CONFIG_ATH79_MACH_AW_NR580 is not set
-# CONFIG_ATH79_MACH_BHR_4GRV2 is not set
-# CONFIG_ATH79_MACH_BHU_BXU2000N2_A is not set
-# CONFIG_ATH79_MACH_BSB is not set
-# CONFIG_ATH79_MACH_C55 is not set
-# CONFIG_ATH79_MACH_C60 is not set
-# CONFIG_ATH79_MACH_CAP324 is not set
-# CONFIG_ATH79_MACH_CAP4200AG is not set
-# CONFIG_ATH79_MACH_CARAMBOLA2 is not set
-# CONFIG_ATH79_MACH_CF_E316N_V2 is not set
-# CONFIG_ATH79_MACH_CF_E320N_V2 is not set
-# CONFIG_ATH79_MACH_CF_E355AC is not set
-# CONFIG_ATH79_MACH_CF_E375AC is not set
-# CONFIG_ATH79_MACH_CF_E380AC_V1 is not set
-# CONFIG_ATH79_MACH_CF_E380AC_V2 is not set
-# CONFIG_ATH79_MACH_CF_E520N is not set
-# CONFIG_ATH79_MACH_CF_E530N is not set
-# CONFIG_ATH79_MACH_CPE505N is not set
-# CONFIG_ATH79_MACH_CPE510 is not set
-# CONFIG_ATH79_MACH_CPE830 is not set
-# CONFIG_ATH79_MACH_CPE870 is not set
-# CONFIG_ATH79_MACH_CR3000 is not set
-# CONFIG_ATH79_MACH_CR5000 is not set
-# CONFIG_ATH79_MACH_DAP_1330_A1 is not set
-# CONFIG_ATH79_MACH_DAP_2695_A1 is not set
-# CONFIG_ATH79_MACH_DB120 is not set
-# CONFIG_ATH79_MACH_DGL_5500_A1 is not set
-# CONFIG_ATH79_MACH_DHP_1565_A1 is not set
-# CONFIG_ATH79_MACH_DIR_505_A1 is not set
-# CONFIG_ATH79_MACH_DIR_600_A1 is not set
-# CONFIG_ATH79_MACH_DIR_615_C1 is not set
-# CONFIG_ATH79_MACH_DIR_615_I1 is not set
-# CONFIG_ATH79_MACH_DIR_825_B1 is not set
-# CONFIG_ATH79_MACH_DIR_825_C1 is not set
-# CONFIG_ATH79_MACH_DIR_869_A1 is not set
-# CONFIG_ATH79_MACH_DLAN_HOTSPOT is not set
-# CONFIG_ATH79_MACH_DLAN_PRO_1200_AC is not set
-# CONFIG_ATH79_MACH_DLAN_PRO_500_WP is not set
-# CONFIG_ATH79_MACH_DOMYWIFI_DW33D is not set
-# CONFIG_ATH79_MACH_DR342 is not set
-# CONFIG_ATH79_MACH_DR344 is not set
-# CONFIG_ATH79_MACH_DR531 is not set
-# CONFIG_ATH79_MACH_DRAGINO2 is not set
-# CONFIG_ATH79_MACH_E1700AC_V2 is not set
-# CONFIG_ATH79_MACH_E2100L is not set
-# CONFIG_ATH79_MACH_E558_V2 is not set
-# CONFIG_ATH79_MACH_E600G_V2 is not set
-# CONFIG_ATH79_MACH_E750A_V4 is not set
-# CONFIG_ATH79_MACH_E750G_V8 is not set
-# CONFIG_ATH79_MACH_EAP120 is not set
-# CONFIG_ATH79_MACH_EAP300V2 is not set
-# CONFIG_ATH79_MACH_EAP7660D is not set
-# CONFIG_ATH79_MACH_EL_M150 is not set
-# CONFIG_ATH79_MACH_EL_MINI is not set
-# CONFIG_ATH79_MACH_ENS202EXT is not set
-# CONFIG_ATH79_MACH_EPG5000 is not set
-# CONFIG_ATH79_MACH_ESR1750 is not set
-# CONFIG_ATH79_MACH_ESR900 is not set
-# CONFIG_ATH79_MACH_EW_BALIN is not set
-# CONFIG_ATH79_MACH_EW_DORIN is not set
-# CONFIG_ATH79_MACH_F9K1115V2 is not set
-# CONFIG_ATH79_MACH_FRITZ300E is not set
-# CONFIG_ATH79_MACH_FRITZ4020 is not set
-# CONFIG_ATH79_MACH_FRITZ450E is not set
-# CONFIG_ATH79_MACH_GL_AR150 is not set
-# CONFIG_ATH79_MACH_GL_AR300 is not set
-# CONFIG_ATH79_MACH_GL_AR300M is not set
-# CONFIG_ATH79_MACH_GL_AR750 is not set
-# CONFIG_ATH79_MACH_GL_AR750S is not set
-# CONFIG_ATH79_MACH_GL_DOMINO is not set
-# CONFIG_ATH79_MACH_GL_INET is not set
-# CONFIG_ATH79_MACH_GL_MIFI is not set
-# CONFIG_ATH79_MACH_GL_USB150 is not set
-# CONFIG_ATH79_MACH_GS_MINIBOX_V32 is not set
-# CONFIG_ATH79_MACH_GS_OOLITE_V1 is not set
-# CONFIG_ATH79_MACH_GS_OOLITE_V5_2 is not set
-# CONFIG_ATH79_MACH_HIVEAP_121 is not set
-# CONFIG_ATH79_MACH_HIWIFI_HC6361 is not set
-# CONFIG_ATH79_MACH_HORNET_UB is not set
-# CONFIG_ATH79_MACH_JA76PF is not set
-# CONFIG_ATH79_MACH_JWAP003 is not set
-# CONFIG_ATH79_MACH_JWAP230 is not set
-# CONFIG_ATH79_MACH_KOALA is not set
-# CONFIG_ATH79_MACH_LAN_TURTLE is not set
-# CONFIG_ATH79_MACH_LIMA is not set
-# CONFIG_ATH79_MACH_MC_MAC1200R is not set
-# CONFIG_ATH79_MACH_MR12 is not set
-# CONFIG_ATH79_MACH_MR16 is not set
-# CONFIG_ATH79_MACH_MR1750 is not set
-# CONFIG_ATH79_MACH_MR18 is not set
-# CONFIG_ATH79_MACH_MR600 is not set
-# CONFIG_ATH79_MACH_MR900 is not set
-# CONFIG_ATH79_MACH_MYNET_N600 is not set
-# CONFIG_ATH79_MACH_MYNET_N750 is not set
-# CONFIG_ATH79_MACH_MYNET_REXT is not set
-# CONFIG_ATH79_MACH_MZK_W04NU is not set
-# CONFIG_ATH79_MACH_MZK_W300NH is not set
-# CONFIG_ATH79_MACH_N5Q is not set
-# CONFIG_ATH79_MACH_NBG460N is not set
-# CONFIG_ATH79_MACH_NBG6716 is not set
-# CONFIG_ATH79_MACH_OM2P is not set
-# CONFIG_ATH79_MACH_OM5P is not set
-# CONFIG_ATH79_MACH_OM5P_AC is not set
-# CONFIG_ATH79_MACH_OM5P_ACv2 is not set
-# CONFIG_ATH79_MACH_OMY_G1 is not set
-# CONFIG_ATH79_MACH_OMY_X1 is not set
-# CONFIG_ATH79_MACH_ONION_OMEGA is not set
-# CONFIG_ATH79_MACH_PB42 is not set
-# CONFIG_ATH79_MACH_PB44 is not set
-# CONFIG_ATH79_MACH_PQI_AIR_PEN is not set
-# CONFIG_ATH79_MACH_QIHOO_C301 is not set
-# CONFIG_ATH79_MACH_R36A is not set
-# CONFIG_ATH79_MACH_R602N is not set
-# CONFIG_ATH79_MACH_R6100 is not set
-# CONFIG_ATH79_MACH_RAMBUTAN is not set
-# CONFIG_ATH79_MACH_RB2011 is not set
-# CONFIG_ATH79_MACH_RB4XX is not set
-# CONFIG_ATH79_MACH_RB750 is not set
-# CONFIG_ATH79_MACH_RB91X is not set
-# CONFIG_ATH79_MACH_RB922 is not set
-# CONFIG_ATH79_MACH_RB95X is not set
-# CONFIG_ATH79_MACH_RBSPI is not set
-# CONFIG_ATH79_MACH_RBSXTLITE is not set
-# CONFIG_ATH79_MACH_RE355 is not set
-# CONFIG_ATH79_MACH_RE450 is not set
-# CONFIG_ATH79_MACH_RME_EG200 is not set
-# CONFIG_ATH79_MACH_RUT9XX is not set
-# CONFIG_ATH79_MACH_RW2458N is not set
-# CONFIG_ATH79_MACH_SC1750 is not set
-# CONFIG_ATH79_MACH_SC300M is not set
-# CONFIG_ATH79_MACH_SC450 is not set
-# CONFIG_ATH79_MACH_SMART_300 is not set
-# CONFIG_ATH79_MACH_SOM9331 is not set
-# CONFIG_ATH79_MACH_SR3200 is not set
-# CONFIG_ATH79_MACH_T830 is not set
-# CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE is not set
-# CONFIG_ATH79_MACH_TEW_632BRP is not set
-# CONFIG_ATH79_MACH_TEW_673GRU is not set
-# CONFIG_ATH79_MACH_TEW_712BR is not set
-# CONFIG_ATH79_MACH_TEW_732BR is not set
-# CONFIG_ATH79_MACH_TEW_823DRU is not set
-# CONFIG_ATH79_MACH_TL_MR11U is not set
-# CONFIG_ATH79_MACH_TL_MR13U is not set
-# CONFIG_ATH79_MACH_TL_MR3020 is not set
-# CONFIG_ATH79_MACH_TL_MR3X20 is not set
-# CONFIG_ATH79_MACH_TL_MR6400 is not set
-# CONFIG_ATH79_MACH_TL_WA701ND_V2 is not set
-# CONFIG_ATH79_MACH_TL_WA7210N_V2 is not set
-# CONFIG_ATH79_MACH_TL_WA801ND_V3 is not set
-# CONFIG_ATH79_MACH_TL_WA830RE_V2 is not set
-# CONFIG_ATH79_MACH_TL_WA850RE_V2 is not set
-# CONFIG_ATH79_MACH_TL_WA855RE_V1 is not set
-# CONFIG_ATH79_MACH_TL_WA901ND is not set
-# CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set
-# CONFIG_ATH79_MACH_TL_WA901ND_V4 is not set
-# CONFIG_ATH79_MACH_TL_WAX50RE is not set
-# CONFIG_ATH79_MACH_TL_WDR3320_V2 is not set
-# CONFIG_ATH79_MACH_TL_WDR3500 is not set
-# CONFIG_ATH79_MACH_TL_WDR4300 is not set
-# CONFIG_ATH79_MACH_TL_WDR6500_V2 is not set
-# CONFIG_ATH79_MACH_TL_WPA8630 is not set
-# CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
-# CONFIG_ATH79_MACH_TL_WR1043ND is not set
-# CONFIG_ATH79_MACH_TL_WR1043ND_V2 is not set
-# CONFIG_ATH79_MACH_TL_WR1043ND_V4 is not set
-# CONFIG_ATH79_MACH_TL_WR1043N_V5 is not set
-# CONFIG_ATH79_MACH_TL_WR2543N is not set
-# CONFIG_ATH79_MACH_TL_WR703N is not set
-# CONFIG_ATH79_MACH_TL_WR720N_V3 is not set
-# CONFIG_ATH79_MACH_TL_WR741ND is not set
-# CONFIG_ATH79_MACH_TL_WR741ND_V4 is not set
-# CONFIG_ATH79_MACH_TL_WR802N_V1 is not set
-# CONFIG_ATH79_MACH_TL_WR802N_V2 is not set
-# CONFIG_ATH79_MACH_TL_WR810N is not set
-# CONFIG_ATH79_MACH_TL_WR810N_V2 is not set
-# CONFIG_ATH79_MACH_TL_WR840N_V2 is not set
-# CONFIG_ATH79_MACH_TL_WR841N_V1 is not set
-# CONFIG_ATH79_MACH_TL_WR841N_V8 is not set
-# CONFIG_ATH79_MACH_TL_WR841N_V9 is not set
-# CONFIG_ATH79_MACH_TL_WR902AC_V1 is not set
-# CONFIG_ATH79_MACH_TL_WR940N_V4 is not set
-# CONFIG_ATH79_MACH_TL_WR941ND is not set
-# CONFIG_ATH79_MACH_TL_WR941ND_V6 is not set
-# CONFIG_ATH79_MACH_TL_WR942N_V1 is not set
-# CONFIG_ATH79_MACH_TS_D084 is not set
-# CONFIG_ATH79_MACH_TUBE2H is not set
-# CONFIG_ATH79_MACH_UBNT is not set
-# CONFIG_ATH79_MACH_UBNT_UNIFIAC is not set
-# CONFIG_ATH79_MACH_UBNT_XM is not set
-# CONFIG_ATH79_MACH_WAM250 is not set
-# CONFIG_ATH79_MACH_WEIO is not set
-# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
-# CONFIG_ATH79_MACH_WI2A_AC200I is not set
-# CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO is not set
-# CONFIG_ATH79_MACH_WLAE_AG300N is not set
-# CONFIG_ATH79_MACH_WLR8100 is not set
-# CONFIG_ATH79_MACH_WNDAP360 is not set
-# CONFIG_ATH79_MACH_WNDR3700 is not set
-# CONFIG_ATH79_MACH_WNDR4300 is not set
-# CONFIG_ATH79_MACH_WNR2000 is not set
-# CONFIG_ATH79_MACH_WNR2000_V3 is not set
-# CONFIG_ATH79_MACH_WNR2000_V4 is not set
-# CONFIG_ATH79_MACH_WNR2200 is not set
-# CONFIG_ATH79_MACH_WP543 is not set
-# CONFIG_ATH79_MACH_WPE72 is not set
-# CONFIG_ATH79_MACH_WPJ342 is not set
-# CONFIG_ATH79_MACH_WPJ344 is not set
-# CONFIG_ATH79_MACH_WPJ531 is not set
-# CONFIG_ATH79_MACH_WPJ558 is not set
-# CONFIG_ATH79_MACH_WPJ563 is not set
-# CONFIG_ATH79_MACH_WRT160NL is not set
-# CONFIG_ATH79_MACH_WRT400N is not set
-# CONFIG_ATH79_MACH_WRTNODE2Q is not set
-# CONFIG_ATH79_MACH_WZR_450HP2 is not set
-# CONFIG_ATH79_MACH_WZR_HP_AG300H is not set
-# CONFIG_ATH79_MACH_WZR_HP_G300NH is not set
-# CONFIG_ATH79_MACH_WZR_HP_G300NH2 is not set
-# CONFIG_ATH79_MACH_WZR_HP_G450H is not set
-# CONFIG_ATH79_MACH_XD3200 is not set
-# CONFIG_ATH79_MACH_Z1 is not set
-# CONFIG_ATH79_MACH_ZBT_WE1526 is not set
-# CONFIG_ATH79_MACH_ZCN_1523H is not set
-# CONFIG_ATH79_NVRAM is not set
-# CONFIG_ATH79_PCI_ATH9K_FIXUP is not set
-# CONFIG_ATH79_ROUTERBOOT is not set
-CONFIG_ATH79_WDT=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_COMMON_CLK_BOSTON is not set
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_ATH79=y
-CONFIG_GPIO_GENERIC=y
-# CONFIG_GPIO_LATCH is not set
-CONFIG_GPIO_NXP_74HC153=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../../root"
-CONFIG_INTEL_XWAY_PHY=y
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CYBERTAN_PARTS=y
-CONFIG_MTD_M25P80=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_EVA_FW=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_LZMA_FW=y
-CONFIG_MTD_SPLIT_MINOR_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_MTD_TPLINK_PARTS=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6060=y
-CONFIG_NET_DSA_MV88E6063=y
-CONFIG_NET_DSA_TAG_TRAILER=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_NO_IOPORT_MAP is not set
-# CONFIG_OF is not set
-# CONFIG_PCI_AR724X is not set
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_RATIONAL=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366RB_PHY=y
-CONFIG_RTL8366S_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_FSL is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SOC_AR71XX is not set
-# CONFIG_SOC_AR724X is not set
-# CONFIG_SOC_AR913X is not set
-# CONFIG_SOC_AR933X is not set
-# CONFIG_SOC_AR934X is not set
-# CONFIG_SOC_QCA953X is not set
-# CONFIG_SOC_QCA955X is not set
-# CONFIG_SOC_QCA956X is not set
-CONFIG_SPI=y
-CONFIG_SPI_ATH79=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_RB4XX is not set
-# CONFIG_SPI_VSC7385 is not set
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_USB_SUPPORT=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
deleted file mode 100644
index 6fd78c46a0..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ /dev/null
@@ -1,2458 +0,0 @@
-config ATH79_MACH_A60
- bool "OpenMesh A40/A60 board support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_DEV_USB
-
-config ATH79_MACH_WI2A_AC200I
- bool "Nokia WI2A-AC200i support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_NFC
- select ATH79_DEV_WMAC
- select ATH79_DEV_USB
-
-config ATH79_MACH_ALFA_AP120C
- bool "ALFA Network AP120C board support"
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_AP121F
- bool "ALFA Network AP121F support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ALFA_AP96
- bool "ALFA Network AP96 board support"
- select SOC_AR71XX
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_HORNET_UB
- bool "ALFA Network Hornet-UB board support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ALFA_NX
- bool "ALFA Network N2/N5 board support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_TUBE2H
- bool "ALFA Network Tube2H board support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_SC1750
- bool "Abicom SC1750 board support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_SC300M
- bool "Abicom SC300M board support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_SC450
- bool "Abicom SC450 board support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ALL0258N
- bool "Allnet ALL0258N support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_ALL0315N
- bool "Allnet ALL0315N support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_ANTMINER_S1
- bool "Bitmain Antminer S1 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ANTMINER_S3
- bool "Bitmain Antminer S3 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ANTROUTER_R1
- bool "Bitmain Antrouter R1 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ARDUINO_YUN
- bool "Arduino Yun"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_AP132
- bool "Atheros AP132 reference board"
- select SOC_QCA955X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_AP143
- bool "Atheros AP143 reference board"
- select SOC_QCA953X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_DEV_ETH
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_AP147
- bool "Atheros AP147 reference board"
- select SOC_QCA953X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_DEV_AP9X_PCI if PCI
-
-config ATH79_MACH_AP152
- bool "Atheros AP152 reference board"
- select SOC_QCA956X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_DEV_AP9X_PCI if PCI
-
-config ATH79_MACH_AP531B0
- bool "Rockeetech AP531B0 support"
- select SOC_QCA953X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_AP90Q
- bool "YunCore AP80Q/AP90Q support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_AP91_5G
- bool "ALFA Network AP91-5G support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_AP96
- bool "Atheros AP96 board support"
- select SOC_AR71XX
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_PB42
- bool "Atheros PB42 board support"
- select SOC_AR71XX
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_C55
- bool "AirTight Networks C-55 support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_C60
- bool "AirTight Networks C-60 support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_DEV_NFC
- select ATH79_DEV_USB
-
-config ATH79_MACH_AW_NR580
- bool "AzureWave AW-NR580 board support"
- select SOC_AR71XX
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_F9K1115V2
- bool "Belkin AC1750DB board support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_EPG5000
- bool "EnGenius EPG5000 board support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_ESR1750
- bool "EnGenius ESR1750 board support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_PQI_AIR_PEN
- bool "PQI Air Pen"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_SOM9331
- bool "SOM9331 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_SR3200
- bool "YunCore SR3200 support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_BHR_4GRV2
- bool "Buffalo BHR-4GRV2 board support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_WHR_HP_G300N
- bool "Buffalo WHR-HP-G300N board support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_WLAE_AG300N
- bool "Buffalo WLAE-AG300N board support"
- select SOC_AR71XX
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_WLR8100
- bool "Sitecom WLR-8100 board support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_WZR_HP_AG300H
- bool "Buffalo WZR-HP-AG300H board support"
- select SOC_AR71XX
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_WZR_HP_G300NH
- bool "Buffalo WZR-HP-G300NH board support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select RTL8366_SMI
-
-config ATH79_MACH_WZR_HP_G300NH2
- bool "Buffalo WZR-HP-G300NH2 board support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_WZR_HP_G450H
- bool "Buffalo WZR-HP-G450H board support"
- select SOC_AR724X
- select ATH79_DEV_ETH
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_WZR_450HP2
- bool "Buffalo WZR-450HP2 board support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_WP543
- bool "Compex WP543/WPJ543 board support"
- select SOC_AR71XX
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select MYLOADER
-
-config ATH79_MACH_WPE72
- bool "Compex WPE72/WPE72NX board support"
- select SOC_AR724X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select MYLOADER
-
-config ATH79_MACH_WPJ342
- bool "Compex WPJ342 board support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_WPJ344
- bool "Compex WPJ344 board support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_WPJ531
- bool "Compex WPJ531 board support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_WPJ558
- bool "Compex WPJ558 board support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_WPJ563
- bool "Compex WPJ563 board support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_XD3200
- bool "YunCore XD3200 support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_DGL_5500_A1
- bool "D-Link DGL-5500 A1 support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_DEV_USB
-
-config ATH79_MACH_DHP_1565_A1
- bool "D-Link DHP-1565 rev. A1 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_DIR_505_A1
- bool "D-Link DIR-505-A1 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_DIR_600_A1
- bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_NVRAM
-
-config ATH79_MACH_DIR_615_C1
- bool "D-Link DIR-615 rev. C1 support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_DIR_615_I1
- bool "D-Link DIR-615 rev. I1 support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_DIR_825_B1
- bool "D-Link DIR-825 rev. B1 board support"
- select SOC_AR71XX
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_DIR_825_C1
- bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_DIR_869_A1
- bool "D-Link DIR-869 rev. A1"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_DLAN_HOTSPOT
- bool "devolo dLAN Hotspot support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_DLAN_PRO_500_WP
- bool "devolo dLAN pro 500 Wireless+ support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_DEV_USB
-
-config ATH79_MACH_DLAN_PRO_1200_AC
- bool "devolo dLAN pro 1200+ WiFi ac support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_DEV_NFC
- select ATH79_DEV_USB
-
-config ATH79_MACH_DOMYWIFI_DW33D
- bool "DomyWifi DW33D support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_NFC
- select ATH79_DEV_WMAC
- select ATH79_DEV_USB
-
-config ATH79_MACH_DR342
- bool "Wallys DR342 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_DR344
- bool "Wallys DR344 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_DR531
- bool "Wallys DR531 board support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_DRAGINO2
- bool "DRAGINO V2 support"
- select SOC_AR933X
- select ATH79_DEV_M25P80
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_WMAC
- select ATH79_DEV_ETH
- select ATH79_DEV_USB
-
-config ATH79_MACH_E1700AC_V2
- bool "Qxwlan E1700AC v2 support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_E2100L
- bool "Linksys E2100L board support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_E558_V2
- bool "Qxwlan E558 v2 support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_E600G_V2
- bool "Qxwlan E600G/E600GAC v2 support"
- select SOC_QCA953X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_E750A_V4
- bool "Qxwlan E750A v4 support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_E750G_V8
- bool "Qxwlan E750G v8 support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ESR900
- bool "EnGenius ESR900 board support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_EW_BALIN
- bool "embedded wireless Balin Platform support"
- select SOC_AR934X
- select ATH79_DEV_M25P80
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_WMAC
- select ATH79_DEV_ETH
- select ATH79_DEV_USB
- select ATH79_DEV_AP9X_PCI if PCI
-
-config ATH79_MACH_EW_DORIN
- bool "embedded wireless Dorin Platform support"
- select SOC_AR933X
- select ATH79_DEV_M25P80
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_WMAC
- select ATH79_DEV_ETH
-
-config ATH79_MACH_EL_M150
- bool "EasyLink EL-M150 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_EL_MINI
- bool "EasyLink EL-MINI support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_GL_AR150
- bool "GL AR150 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_GL_AR300
- bool "GL_AR300 support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_GL_AR300M
- bool "GL_AR300M support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_GL_AR750
- bool "GL.iNet GL-AR750 support"
- select SOC_QCA953X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_GL_AR750S
- bool "GL.iNet GL-AR750S support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_GL_DOMINO
- bool "DOMINO support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_GL_MIFI
- bool "GL MIFI support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_GL_INET
- bool "GL-INET support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_GL_USB150
- bool "GL.iNet GL-USB150 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_EAP120
- bool "TP-LINK EAP120 support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ENS202EXT
- bool "EnGenius ENS202EXT support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_EAP300V2
- bool "EnGenius EAP300 v2 support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_GS_MINIBOX_V32
- bool "Gainstrong Minibox V3.2 support"
- select SOC_QCA953X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_DEV_ETH
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_GS_OOLITE_V1
- bool "GainStrong Oolite/Minibox V1.0 support"
- select SOC_AR933X
- select ARH79_DEV_ETH
- select ARH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_GS_OOLITE_V5_2
- bool "GainStrong Oolite V5.2 support"
- select SOC_QCA953X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_HIVEAP_121
- bool "Aerohive HiveAP-121 support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_HIWIFI_HC6361
- bool "HiWiFi HC6361 board support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_JA76PF
- bool "jjPlus JA76PF board support"
- select SOC_AR71XX
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_JWAP003
- bool "jjPlus JWAP003 board support"
- select SOC_AR71XX
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_JWAP230
- bool "jjPlus JWAP230 board support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_KOALA
- bool "OCEDO Koala board support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_ETH
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_WAM250
- bool "Samsung WAM250 support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_WIFI_PINEAPPLE_NANO
- bool "Hak5 WiFi Pineapple NANO support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_WRT160NL
- bool "Linksys WRT160NL board support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_WRT400N
- bool "Linksys WRT400N board support"
- select SOC_AR71XX
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_WRTNODE2Q
- bool "WRTnode2Q board support"
- select SOC_QCA953X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_R36A
- bool "ALFA Network R36A support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_R602N
- bool "P&W R602N support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_R6100
- bool "NETGEAR R6100 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_MC_MAC1200R
- bool "MERCURY MAC1200R board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_RB4XX
- bool "MikroTik RouterBOARD 4xx series support"
- select SOC_AR71XX
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_USB
-
-config ATH79_MACH_RB750
- bool "MikroTik RouterBOARD 750 support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_USB
- select ATH79_ROUTERBOOT
-
-config ATH79_MACH_RB91X
- bool "MikroTik RouterBOARD 91X support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_SPI
- select ATH79_DEV_WMAC
- select ATH79_DEV_USB
- select ATH79_ROUTERBOOT
-
-config ATH79_MACH_RB922
- bool "MikroTik RouterBOARD 922 support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_M25P80
- select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_ROUTERBOOT
- select RLE_DECOMPRESS
-
-config ATH79_MACH_RB95X
- bool "MikroTik RouterBOARD 95X support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_NFC
- select ATH79_DEV_WMAC
- select ATH79_DEV_USB
- select ATH79_ROUTERBOOT
-
-config ATH79_MACH_RB2011
- bool "MikroTik RouterBOARD 2011 support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_M25P80
- select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_ROUTERBOOT
-
-config ATH79_MACH_RBSPI
- bool "MikroTik RouterBOARD SPI-NOR support"
- select SOC_AR934X
- select SOC_QCA953X
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_ROUTERBOOT
- help
- Say 'Y' here if you want your kernel to support the
- MikroTik ROuterBOARD 911-2Hn (911 Lite2)
- MikroTik ROuterBOARD 911-5Hn (911 Lite5)
- MikroTik RouterBOARD mAP
- MikroTik RouterBOARD mAP lite
- MikroTik RouterBOARD hAP mini
- MikroTik RouterBOARD hAP lite
- MikroTik RouterBOARD hAP
- MikroTik RouterBOARD hAP ac
- MikroTik RouterBOARD hAP ac lite
- MikroTik RouterBOARD hEX PoE lite
- MikroTik RouterBOARD hEX lite
- MikroTik RouterBOARD Powerbox
- MikroTik RouterBOARD LHG 5
- MikroTik RouterBOARD cAP (EXPERIMENTAL)
- MikroTik RouterBOARD SXT Lite 2 r3
- MikroTik RouterBOARD wAP
- MikroTik RouterBOARD wAP R-2nD
-
-config ATH79_MACH_RBSXTLITE
- bool "MikroTik RouterBOARD SXT Lite"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_NFC
- select ATH79_DEV_WMAC
- select ATH79_ROUTERBOOT
-
-config ATH79_MACH_SMART_300
- bool "NC-LINK SMART-300 board support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_T830
- bool "YunCore T830 support"
- select SOC_QCA953X
- select ARH79_DEV_ETH
- select ARH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TELLSTICK_ZNET_LITE
- bool "TellStick ZNet Lite"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_WNDAP360
- bool "NETGEAR WNDAP360 board support"
- select SOC_AR71XX
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_WNDR3700
- bool "NETGEAR WNDR3700 board support"
- select SOC_AR71XX
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_WNDR4300
- bool "NETGEAR WNDR3700v4/WNDR4300 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_WNR2000
- bool "NETGEAR WNR2000 board support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_WNR2000_V3
- bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2/WPN824N board support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_WNR2200
- bool "NETGEAR WNR2200 board support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_WNR2000_V4
- bool "NETGEAR WNR2000 V4"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_OM2P
- bool "OpenMesh OM2P board support"
- select SOC_AR724X
- select SOC_AR933X
- select SOC_QCA953X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_OM5P
- bool "OpenMesh OM5P board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_OM5P_AC
- bool "OpenMesh OM5P-AC board support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_OM5P_ACv2
- bool "OpenMesh OM5P-ACv2 board support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_OMY_G1
- bool "OMYlink OMY G1 support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_OMY_X1
- bool "OMYlink OMY X1 support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ONION_OMEGA
- bool "ONION OMEGA support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_MR12
- bool "Meraki MR12 board support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_MR16
- bool "Meraki MR16 board support"
- select SOC_AR71XX
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_MR18
- bool "Meraki MR18 board support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_NFC
- select ATH79_DEV_WMAC
- select LEDS_NU801
-
-config ATH79_MACH_MR600
- bool "OpenMesh MR600 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_MZK_W04NU
- bool "Planex MZK-W04NU board support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_MZK_W300NH
- bool "Planex MZK-W300NH board support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_RE355
- bool "TP-LINK RE355 board support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_RE450
- bool "TP-LINK RE450 board support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_RME_EG200
- bool "eTactica EG200 board supprt"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_RUT9XX
- bool "Teltonika RUT900 series support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select GPIO_PCA953X
-
-config ATH79_MACH_RW2458N
- bool "Redwave RW2458N board support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_CAP324
- bool "PowerCloud Systems CAP324 support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CAP4200AG
- bool "Senao CAP4200AG support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CR3000
- bool "PowerCloud Systems CR3000 support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CR5000
- bool "PowerCloud CR5000 support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_MR1750
- bool "OpenMesh MR1750 board support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_MR900
- bool "OpenMesh MR900 board support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_EAP7660D
- bool "Senao EAP7660D support"
- select SOC_AR71XX
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_BSB
- bool "Smart Electronics Black Swift board"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ARCHER_C25_V1
- bool "TP-LINK Archer C25 v1 support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ARCHER_C58_V1
- bool "TP-LINK Archer C58 v1 support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ARCHER_C59_V1
- bool "TP-LINK Archer C59 v1 support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ARCHER_C59_V2
- bool "TP-LINK Archer C59 v2 support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ARCHER_C60_V1
- bool "TP-LINK Archer C60 v1 support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ARCHER_C60_V2
- bool "TP-LINK Archer C60 v2 support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ARCHER_C7
- bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
- select SOC_QCA955X
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CPE505N
- bool "P&W CPE505N support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CPE510
- bool "TP-LINK CPE510 support"
- select SOC_AR934X
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CPE830
- bool "YunCore CPE830 support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CPE870
- bool "YunCore CPE870 support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_MR11U
- bool "TP-LINK TL-MR11U/TL-MR3040 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_MR13U
- bool "TP-LINK TL-MR13U support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_MR3020
- bool "TP-LINK TL-MR3020 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_MR3X20
- bool "TP-LINK TL-MR3220/3420 support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_TL_MR6400
- bool "TP-LINK TL-MR6400 support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WAX50RE
- bool "TP-LINK TL-WA750/850RE support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WA701ND_V2
- bool "TP-LINK TL-WA701ND v2 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WA7210N_V2
- bool "TP-LINK TL-WA7210N v2 support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WA801ND_V3
- bool "TP-LINK TL-WA801ND v3 support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WA830RE_V2
- bool "TP-LINK TL-WA830RE v2 support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WA850RE_V2
- bool "TP-LINK TL-WA850RE v2 support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WA855RE_V1
- bool "TP-LINK TL-WA855RE V1 support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WA901ND
- bool "TP-LINK TL-WA901ND/TL-WA7510N support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_TL_WA901ND_V2
- bool "TP-LINK TL-WA901ND v2 support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WA901ND_V4
- bool "TP-LINK TL-WA901ND v4 support"
- select SOC_QCA956X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WDR3320_V2
- bool "TP-LINK TL-WDR3320 v2 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WDR3500
- bool "TP-LINK TL-WDR3500 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WDR4300
- bool "TP-LINK TL-WDR3600/4300/4310 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WDR6500_V2
- bool "TP-LINK TL-WDR6500 v2 board support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR703N
- bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR720N_V3
- bool "TP-LINK TL-WR720N v3/v4 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR741ND
- bool "TP-LINK TL-WR741ND support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_TL_WR741ND_V4
- bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR802N_V1
- bool "TP-LINK TL-WR802N v1 support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_TL_WR802N_V2
- bool "TP-LINK TL-WR802N v2 support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_TL_WR810N
- bool "TP-LINK TL-WR810N support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR810N_V2
- bool "TP-LINK TL-WR810N v2 support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR840N_V2
- bool "TP-LINK TL-WR840N v2/v3 support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR841N_V1
- bool "TP-LINK TL-WR841N v1 support"
- select SOC_AR71XX
- select ATH79_DEV_DSA
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_TL_WR841N_V8
- bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR841N_V9
- bool "TP-LINK TL-WR841N/ND v9/TL-WR842N/ND v3/TL-WR740N/ND v6 support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR902AC_V1
- bool "TP-LINK TL-WR902AC v1 support"
- select SOC_QCA953X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR941ND
- bool "TP-LINK TL-WR941ND support"
- select SOC_AR913X
- select ATH79_DEV_DSA
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR941ND_V6
- bool "TP-LINK TL-WR941ND v6 support"
- select SOC_QCA956X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR940N_V4
- bool "TP-LINK TL-WR940N v4 support"
- select SOC_QCA956X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR942N_V1
- bool "TP-LINK TL-WR942N v1 support"
- select SOC_QCA956X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_TL_WR1041N_V2
- bool "TP-LINK TL-WR1041N v2 support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR1043N_V5
- bool "TP-LINK TL-WR1043N v5 support"
- select SOC_QCA956X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR1043ND
- bool "TP-LINK TL-WR1043ND support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR1043ND_V2
- bool "TP-LINK TL-WR1043ND v2 support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR1043ND_V4
- bool "TP-LINK TL-WR1043ND v4 support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TL_WR2543N
- bool "TP-LINK TL-WR2543N/ND support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_TS_D084
- bool "PISEN TS-D084 support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TEW_632BRP
- bool "TRENDnet TEW-632BRP support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_TEW_673GRU
- bool "TRENDnet TEW-673GRU support"
- select SOC_AR71XX
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_TEW_712BR
- bool "TRENDnet TEW-712BR support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TEW_732BR
- bool "TRENDnet TEW-732BR support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_TEW_823DRU
- bool "TRENDnet TEW-823DRU support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_UBNT
- bool "Ubiquiti AR71xx based boards support"
- select SOC_AR71XX
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_UBNT_UNIFIAC
- bool "Ubiquiti UniFi AC (LITE/LR/MESH/PRO/MESH-PRO) support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_DEV_USB
-
-config ATH79_MACH_WEIO
- bool "WeIO board"
- select SOC_AR933X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_MYNET_N600
- bool "WD My Net N600 board support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_MYNET_N750
- bool "WD My Net N750 board support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_MYNET_REXT
- bool "WD My Net Wi-Fi Range Extender board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_Z1
- bool "Meraki Z1 board support"
- select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select LEDS_NU801
-
-config ATH79_MACH_ZBT_WE1526
- bool "Zbtlink ZBT-WE1526 board support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_ZCN_1523H
- bool "Zcomax ZCN-1523H support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_N5Q
- bool "ALFA Network N5Q support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_NBG460N
- bool "Zyxel NBG460N/550N/550NH board support"
- select SOC_AR913X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_NBG6716
- bool "Zyxel NBG6616/NBG6716 board support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_CARAMBOLA2
- bool "8devices Carambola2 board"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_LAN_TURTLE
- bool "Hak5 LAN Turtle and Packet Squirrel support"
- select SOC_AR933X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
-
-config ATH79_MACH_LIMA
- bool "8devices Lima board"
- select SOC_QCA953X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_M25P80
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- select ATH79_DEV_ETH
-
-config ATH79_MACH_RAMBUTAN
- bool "8devices Rambutan board"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CF_E316N_V2
- bool "COMFAST CF-E316N v2 support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CF_E320N_V2
- bool "COMFAST CF-E320N v2 support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CF_E355AC
- bool "COMFAST CF-E355AC v1/v2 support"
- select SOC_QCA953X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CF_E375AC
- bool "COMFAST CF-E375AC support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CF_E380AC_V1
- bool "COMFAST CF-E380AC v1 support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CF_E380AC_V2
- bool "COMFAST CF-E380AC v2 support"
- select SOC_QCA955X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CF_E520N
- bool "COMFAST CF-E520N support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_CF_E530N
- bool "COMFAST CF-E530N support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_BHU_BXU2000N2_A
- bool "BHU BXU2000n-2 rev. A support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_QIHOO_C301
- bool "Qihoo 360 C301 board support"
- select SOC_AR934X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_DEV_USB
- select ATH79_NVRAM
-
-config ATH79_MACH_DAP_1330_A1
- bool "D-Link DAP-1330 rev. A1 support"
- select SOC_QCA953X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_DAP_2695_A1
- bool "D-Link DAP-2695 rev. A1 support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
- select ATH79_NVRAM
-
-config ATH79_MACH_TL_WPA8630
- bool "TP-Link TL-WPA8630 support"
- select SOC_QCA956X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
-
-config ATH79_MACH_FRITZ300E
- bool "AVM FRITZ!WLAN Repeater 300E support"
- select SOC_AR724X
- select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_FRITZ4020
- bool "AVM FRITZ!Box 4020 support"
- select SOC_QCA956X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_USB
- select ATH79_DEV_M25P80
-
-config ATH79_MACH_FRITZ450E
- bool "AVM FRITZ!WLAN Repeater 450E support"
- select SOC_QCA955X
- select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
- select ATH79_DEV_WMAC
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
deleted file mode 100644
index 0265b3d818..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ /dev/null
@@ -1,290 +0,0 @@
-#
-# Makefile for the Atheros AR71XX/AR724X/AR913X specific parts of the kernel
-#
-# Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-# Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 as published
-# by the Free Software Foundation.
-
-obj-y := prom.o setup.o irq.o common.o clock.o gpio.o
-
-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_PCI) += pci.o
-
-#
-# Devices
-#
-obj-y += dev-common.o
-obj-$(CONFIG_ATH79_DEV_AP9X_PCI) += dev-ap9x-pci.o
-obj-$(CONFIG_ATH79_DEV_DSA) += dev-dsa.o
-obj-$(CONFIG_ATH79_DEV_ETH) += dev-eth.o
-obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
-obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
-obj-$(CONFIG_ATH79_DEV_M25P80) += dev-m25p80.o
-obj-$(CONFIG_ATH79_DEV_NFC) += dev-nfc.o
-obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
-obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
-obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
-
-#
-# Miscellaneous objects
-#
-obj-$(CONFIG_ATH79_NVRAM) += nvram.o
-obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP) += pci-ath9k-fixup.o
-obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o
-
-#
-# Machines
-#
-obj-$(CONFIG_ATH79_MACH_A60) += mach-a60.o
-obj-$(CONFIG_ATH79_MACH_WI2A_AC200I) += mach-wi2a-ac200i.o
-obj-$(CONFIG_ATH79_MACH_ALFA_AP120C) += mach-alfa-ap120c.o
-obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o
-obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o
-obj-$(CONFIG_ATH79_MACH_ALL0258N) += mach-all0258n.o
-obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
-obj-$(CONFIG_ATH79_MACH_ANTMINER_S1) += mach-antminer-s1.o
-obj-$(CONFIG_ATH79_MACH_ANTMINER_S3) += mach-antminer-s3.o
-obj-$(CONFIG_ATH79_MACH_ANTROUTER_R1) += mach-antrouter-r1.o
-obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
-obj-$(CONFIG_ATH79_MACH_AP121F) += mach-ap121f.o
-obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o
-obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
-obj-$(CONFIG_ATH79_MACH_AP143) += mach-ap143.o
-obj-$(CONFIG_ATH79_MACH_AP147) += mach-ap147.o
-obj-$(CONFIG_ATH79_MACH_AP152) += mach-ap152.o
-obj-$(CONFIG_ATH79_MACH_AP531B0) += mach-ap531b0.o
-obj-$(CONFIG_ATH79_MACH_AP90Q) += mach-ap90q.o
-obj-$(CONFIG_ATH79_MACH_AP91_5G) += mach-ap91-5g.o
-obj-$(CONFIG_ATH79_MACH_AP96) += mach-ap96.o
-obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
-obj-$(CONFIG_ATH79_MACH_ARCHER_C58_V1) += mach-archer-c59-v1.o
-obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
-obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
-obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V2) += mach-archer-c60-v1.o
-obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
-obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v4.o
-obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v5.o
-obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
-obj-$(CONFIG_ATH79_MACH_AW_NR580) += mach-aw-nr580.o
-obj-$(CONFIG_ATH79_MACH_BHR_4GRV2) += mach-bhr-4grv2.o
-obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A) += mach-bhu-bxu2000n2-a.o
-obj-$(CONFIG_ATH79_MACH_BSB) += mach-bsb.o
-obj-$(CONFIG_ATH79_MACH_C55) += mach-c55.o
-obj-$(CONFIG_ATH79_MACH_C60) += mach-c60.o
-obj-$(CONFIG_ATH79_MACH_CAP324) += mach-cap324.o
-obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o
-obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o
-obj-$(CONFIG_ATH79_MACH_CF_E316N_V2) += mach-cf-e316n-v2.o
-obj-$(CONFIG_ATH79_MACH_CF_E320N_V2) += mach-cf-e316n-v2.o
-obj-$(CONFIG_ATH79_MACH_CF_E355AC) += mach-cf-e316n-v2.o
-obj-$(CONFIG_ATH79_MACH_CF_E375AC) += mach-cf-e316n-v2.o
-obj-$(CONFIG_ATH79_MACH_CF_E380AC_V1) += mach-cf-e316n-v2.o
-obj-$(CONFIG_ATH79_MACH_CF_E380AC_V2) += mach-cf-e316n-v2.o
-obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o
-obj-$(CONFIG_ATH79_MACH_CF_E530N) += mach-cf-e316n-v2.o
-obj-$(CONFIG_ATH79_MACH_CPE505N) += mach-r602n.o
-obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
-obj-$(CONFIG_ATH79_MACH_CPE830) += mach-ap90q.o
-obj-$(CONFIG_ATH79_MACH_CPE870) += mach-cpe870.o
-obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o
-obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o
-obj-$(CONFIG_ATH79_MACH_DAP_1330_A1) += mach-dap-1330-a1.o
-obj-$(CONFIG_ATH79_MACH_DAP_2695_A1) += mach-dap-2695-a1.o
-obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
-obj-$(CONFIG_ATH79_MACH_DGL_5500_A1) += mach-dgl-5500-a1.o
-obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o
-obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o
-obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o
-obj-$(CONFIG_ATH79_MACH_DIR_615_C1) += mach-dir-615-c1.o
-obj-$(CONFIG_ATH79_MACH_DIR_615_I1) += mach-dir-615-i1.o
-obj-$(CONFIG_ATH79_MACH_DIR_825_B1) += mach-dir-825-b1.o
-obj-$(CONFIG_ATH79_MACH_DIR_825_C1) += mach-dir-825-c1.o
-obj-$(CONFIG_ATH79_MACH_DIR_869_A1) += mach-dir-869-a1.o
-obj-$(CONFIG_ATH79_MACH_DLAN_HOTSPOT) += mach-dlan-hotspot.o
-obj-$(CONFIG_ATH79_MACH_DLAN_PRO_1200_AC) += mach-dlan-pro-1200-ac.o
-obj-$(CONFIG_ATH79_MACH_DLAN_PRO_500_WP) += mach-dlan-pro-500-wp.o
-obj-$(CONFIG_ATH79_MACH_DOMYWIFI_DW33D) += mach-domywifi-dw33d.o
-obj-$(CONFIG_ATH79_MACH_DR342) += mach-dr344.o
-obj-$(CONFIG_ATH79_MACH_DR344) += mach-dr344.o
-obj-$(CONFIG_ATH79_MACH_DR531) += mach-dr531.o
-obj-$(CONFIG_ATH79_MACH_DRAGINO2) += mach-dragino2.o
-obj-$(CONFIG_ATH79_MACH_E1700AC_V2) += mach-e1700ac-v2.o
-obj-$(CONFIG_ATH79_MACH_E558_V2) += mach-e558-v2.o
-obj-$(CONFIG_ATH79_MACH_E600G_V2) += mach-e600g-v2.o
-obj-$(CONFIG_ATH79_MACH_E750A_V4) += mach-e750a-v4.o
-obj-$(CONFIG_ATH79_MACH_E750G_V8) += mach-e750g-v8.o
-obj-$(CONFIG_ATH79_MACH_EAP120) += mach-eap120.o
-obj-$(CONFIG_ATH79_MACH_EAP300V2) += mach-eap300v2.o
-obj-$(CONFIG_ATH79_MACH_EAP7660D) += mach-eap7660d.o
-obj-$(CONFIG_ATH79_MACH_EL_M150) += mach-el-m150.o
-obj-$(CONFIG_ATH79_MACH_EL_MINI) += mach-el-mini.o
-obj-$(CONFIG_ATH79_MACH_ENS202EXT) += mach-ens202ext.o
-obj-$(CONFIG_ATH79_MACH_EPG5000) += mach-epg5000.o
-obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
-obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o
-obj-$(CONFIG_ATH79_MACH_EW_BALIN) += mach-ew-balin.o
-obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
-obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
-obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o
-obj-$(CONFIG_ATH79_MACH_FRITZ4020) += mach-fritz4020.o
-obj-$(CONFIG_ATH79_MACH_FRITZ450E) += mach-fritz450e.o
-obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o
-obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o
-obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o
-obj-$(CONFIG_ATH79_MACH_GL_AR750) += mach-gl-ar750.o
-obj-$(CONFIG_ATH79_MACH_GL_AR750S) += mach-gl-ar750s.o
-obj-$(CONFIG_ATH79_MACH_GL_DOMINO) += mach-gl-domino.o
-obj-$(CONFIG_ATH79_MACH_GL_INET) += mach-gl-inet.o
-obj-$(CONFIG_ATH79_MACH_GL_MIFI) += mach-gl-mifi.o
-obj-$(CONFIG_ATH79_MACH_GL_USB150) += mach-gl-usb150.o
-obj-$(CONFIG_ATH79_MACH_GS_MINIBOX_V32) += mach-gs-minibox-v32.o
-obj-$(CONFIG_ATH79_MACH_GS_OOLITE_V1) += mach-gs-oolite-v1.o
-obj-$(CONFIG_ATH79_MACH_GS_OOLITE_V5_2) += mach-gs-oolite-v5-2.o
-obj-$(CONFIG_ATH79_MACH_HIVEAP_121) += mach-hiveap-121.o
-obj-$(CONFIG_ATH79_MACH_HIWIFI_HC6361) += mach-hiwifi-hc6361.o
-obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
-obj-$(CONFIG_ATH79_MACH_JA76PF) += mach-ja76pf.o
-obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
-obj-$(CONFIG_ATH79_MACH_JWAP230) += mach-jwap230.o
-obj-$(CONFIG_ATH79_MACH_KOALA) += mach-koala.o
-obj-$(CONFIG_ATH79_MACH_LAN_TURTLE) += mach-lan-turtle.o
-obj-$(CONFIG_ATH79_MACH_LIMA) += mach-lima.o
-obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o
-obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o
-obj-$(CONFIG_ATH79_MACH_MR16) += mach-mr16.o
-obj-$(CONFIG_ATH79_MACH_MR1750) += mach-mr1750.o
-obj-$(CONFIG_ATH79_MACH_MR18) += mach-mr18.o
-obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
-obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o
-obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
-obj-$(CONFIG_ATH79_MACH_MYNET_N750) += mach-mynet-n750.o
-obj-$(CONFIG_ATH79_MACH_MYNET_REXT) += mach-mynet-rext.o
-obj-$(CONFIG_ATH79_MACH_MZK_W04NU) += mach-mzk-w04nu.o
-obj-$(CONFIG_ATH79_MACH_MZK_W300NH) += mach-mzk-w300nh.o
-obj-$(CONFIG_ATH79_MACH_N5Q) += mach-n5q.o
-obj-$(CONFIG_ATH79_MACH_NBG460N) += mach-nbg460n.o
-obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o
-obj-$(CONFIG_ATH79_MACH_RAMBUTAN) += mach-rambutan.o
-obj-$(CONFIG_ATH79_MACH_OM2P) += mach-om2p.o
-obj-$(CONFIG_ATH79_MACH_OM5P) += mach-om5p.o
-obj-$(CONFIG_ATH79_MACH_OM5P_AC) += mach-om5pac.o
-obj-$(CONFIG_ATH79_MACH_OM5P_ACv2) += mach-om5pacv2.o
-obj-$(CONFIG_ATH79_MACH_OMY_G1) += mach-omy-g1.o
-obj-$(CONFIG_ATH79_MACH_OMY_X1) += mach-omy-x1.o
-obj-$(CONFIG_ATH79_MACH_ONION_OMEGA) += mach-onion-omega.o
-obj-$(CONFIG_ATH79_MACH_PB42) += mach-pb42.o
-obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
-obj-$(CONFIG_ATH79_MACH_PQI_AIR_PEN) += mach-pqi-air-pen.o
-obj-$(CONFIG_ATH79_MACH_QIHOO_C301) += mach-qihoo-c301.o
-obj-$(CONFIG_ATH79_MACH_R36A) += mach-r36a.o
-obj-$(CONFIG_ATH79_MACH_R602N) += mach-r602n.o
-obj-$(CONFIG_ATH79_MACH_R6100) += mach-r6100.o
-obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
-obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
-obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
-obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
-obj-$(CONFIG_ATH79_MACH_RB922) += mach-rb922.o
-obj-$(CONFIG_ATH79_MACH_RB941) += mach-rb941.o
-obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
-obj-$(CONFIG_ATH79_MACH_RBSPI) += mach-rbspi.o
-obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
-obj-$(CONFIG_ATH79_MACH_RE355) += mach-re450.o
-obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o
-obj-$(CONFIG_ATH79_MACH_RME_EG200) += mach-rme-eg200.o
-obj-$(CONFIG_ATH79_MACH_RUT9XX) += mach-rut9xx.o
-obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
-obj-$(CONFIG_ATH79_MACH_SC1750) += mach-sc1750.o
-obj-$(CONFIG_ATH79_MACH_SC300M) += mach-sc300m.o
-obj-$(CONFIG_ATH79_MACH_SC450) += mach-sc450.o
-obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o
-obj-$(CONFIG_ATH79_MACH_SOM9331) += mach-som9331.o
-obj-$(CONFIG_ATH79_MACH_SR3200) += mach-sr3200.o
-obj-$(CONFIG_ATH79_MACH_T830) += mach-t830.o
-obj-$(CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE) += mach-tellstick-znet-lite.o
-obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
-obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
-obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o
-obj-$(CONFIG_ATH79_MACH_TEW_732BR) += mach-tew-732br.o
-obj-$(CONFIG_ATH79_MACH_TEW_823DRU) += mach-tew-823dru.o
-obj-$(CONFIG_ATH79_MACH_TL_MR11U) += mach-tl-mr11u.o
-obj-$(CONFIG_ATH79_MACH_TL_MR13U) += mach-tl-mr13u.o
-obj-$(CONFIG_ATH79_MACH_TL_MR3020) += mach-tl-mr3020.o
-obj-$(CONFIG_ATH79_MACH_TL_MR3X20) += mach-tl-mr3x20.o
-obj-$(CONFIG_ATH79_MACH_TL_MR6400) += mach-tl-mr6400.o
-obj-$(CONFIG_ATH79_MACH_TL_WA701ND_V2) += mach-tl-wa701nd-v2.o
-obj-$(CONFIG_ATH79_MACH_TL_WA7210N_V2) += mach-tl-wa7210n-v2.o
-obj-$(CONFIG_ATH79_MACH_TL_WA801ND_V3) += mach-tl-wa801nd-v3.o
-obj-$(CONFIG_ATH79_MACH_TL_WA830RE_V2) += mach-tl-wa830re-v2.o
-obj-$(CONFIG_ATH79_MACH_TL_WA850RE_V2) += mach-tl-wax50re.o
-obj-$(CONFIG_ATH79_MACH_TL_WA855RE_V1) += mach-tl-wax50re.o
-obj-$(CONFIG_ATH79_MACH_TL_WA901ND) += mach-tl-wa901nd.o
-obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
-obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V4) += mach-tl-wa901nd-v4.o
-obj-$(CONFIG_ATH79_MACH_TL_WAX50RE) += mach-tl-wax50re.o
-obj-$(CONFIG_ATH79_MACH_TL_WDR3320_V2) += mach-tl-wdr3320-v2.o
-obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o
-obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
-obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2) += mach-tl-wdr6500-v2.o
-obj-$(CONFIG_ATH79_MACH_TL_WPA8630) += mach-tl-wpa8630.o
-obj-$(CONFIG_ATH79_MACH_TL_WR1041N_V2) += mach-tl-wr1041n-v2.o
-obj-$(CONFIG_ATH79_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o
-obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V2) += mach-tl-wr1043nd-v2.o
-obj-$(CONFIG_ATH79_MACH_TL_WR1043ND_V4) += mach-tl-wr1043nd-v4.o
-obj-$(CONFIG_ATH79_MACH_TL_WR2543N) += mach-tl-wr2543n.o
-obj-$(CONFIG_ATH79_MACH_TL_WR703N) += mach-tl-wr703n.o
-obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o
-obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o
-obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
-obj-$(CONFIG_ATH79_MACH_TL_WR802N_V1) += mach-tl-wr802n.o
-obj-$(CONFIG_ATH79_MACH_TL_WR802N_V2) += mach-tl-wr802n.o
-obj-$(CONFIG_ATH79_MACH_TL_WR810N) += mach-tl-wr810n.o
-obj-$(CONFIG_ATH79_MACH_TL_WR810N_V2) += mach-tl-wr810n.o
-obj-$(CONFIG_ATH79_MACH_TL_WR840N_V2) += mach-tl-wr841n-v9.o
-obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
-obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o
-obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o
-obj-$(CONFIG_ATH79_MACH_TL_WR902AC_V1) += mach-tl-wr902ac-v1.o
-obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
-obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6) += mach-tl-wr941nd-v6.o
-obj-$(CONFIG_ATH79_MACH_TL_WR940N_V4) += mach-tl-wr940n-v4.o
-obj-$(CONFIG_ATH79_MACH_TL_WR942N_V1) += mach-tl-wr942n-v1.o
-obj-$(CONFIG_ATH79_MACH_TS_D084) += mach-ts-d084.o
-obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o
-obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
-obj-$(CONFIG_ATH79_MACH_UBNT_UNIFIAC) += mach-ubnt-unifiac.o
-obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
-obj-$(CONFIG_ATH79_MACH_WAM250) += mach-wam250.o
-obj-$(CONFIG_ATH79_MACH_WEIO) += mach-weio.o
-obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o
-obj-$(CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO) += mach-wifi-pineapple-nano.o
-obj-$(CONFIG_ATH79_MACH_WLAE_AG300N) += mach-wlae-ag300n.o
-obj-$(CONFIG_ATH79_MACH_WLR8100) += mach-wlr8100.o
-obj-$(CONFIG_ATH79_MACH_WNDAP360) += mach-wndap360.o
-obj-$(CONFIG_ATH79_MACH_WNDR3700) += mach-wndr3700.o
-obj-$(CONFIG_ATH79_MACH_WNDR4300) += mach-wndr4300.o
-obj-$(CONFIG_ATH79_MACH_WNR2000) += mach-wnr2000.o
-obj-$(CONFIG_ATH79_MACH_WNR2000_V3) += mach-wnr2000-v3.o
-obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o
-obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o
-obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o
-obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o
-obj-$(CONFIG_ATH79_MACH_WPJ342) += mach-wpj342.o
-obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o
-obj-$(CONFIG_ATH79_MACH_WPJ531) += mach-wpj531.o
-obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o
-obj-$(CONFIG_ATH79_MACH_WPJ563) += mach-wpj563.o
-obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
-obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
-obj-$(CONFIG_ATH79_MACH_WRTNODE2Q) += mach-wrtnode2q.o
-obj-$(CONFIG_ATH79_MACH_WZR_450HP2) += mach-wzr-450hp2.o
-obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
-obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
-obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
-obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o
-obj-$(CONFIG_ATH79_MACH_XD3200) += mach-sr3200.o
-obj-$(CONFIG_ATH79_MACH_Z1) += mach-z1.o
-obj-$(CONFIG_ATH79_MACH_ZBT_WE1526) += mach-zbt-we1526.o
-obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.c
deleted file mode 100644
index 483aed78ed..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Atheros AP9X reference board PCI initialization
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "pci-ath9k-fixup.h"
-#include "pci.h"
-
-static struct ath9k_platform_data ap9x_wmac0_data = {
- .led_pin = -1,
-};
-static struct ath9k_platform_data ap9x_wmac1_data = {
- .led_pin = -1,
-};
-static char ap9x_wmac0_mac[6];
-static char ap9x_wmac1_mac[6];
-
-__init void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin)
-{
- switch (wmac) {
- case 0:
- ap9x_wmac0_data.led_pin = pin;
- break;
- case 1:
- ap9x_wmac1_data.led_pin = pin;
- break;
- }
-}
-
-__init struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac)
-{
- switch (wmac) {
- case 0:
- return &ap9x_wmac0_data;
-
- case 1:
- return &ap9x_wmac1_data;
- }
-
- return NULL;
-}
-
-__init void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val)
-{
- switch (wmac) {
- case 0:
- ap9x_wmac0_data.gpio_mask = mask;
- ap9x_wmac0_data.gpio_val = val;
- break;
- case 1:
- ap9x_wmac1_data.gpio_mask = mask;
- ap9x_wmac1_data.gpio_val = val;
- break;
- }
-}
-
-__init void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
- int num_leds)
-{
- switch (wmac) {
- case 0:
- ap9x_wmac0_data.leds = leds;
- ap9x_wmac0_data.num_leds = num_leds;
- break;
- case 1:
- ap9x_wmac1_data.leds = leds;
- ap9x_wmac1_data.num_leds = num_leds;
- break;
- }
-}
-
-__init void ap9x_pci_setup_wmac_btns(unsigned wmac,
- struct gpio_keys_button *btns,
- unsigned num_btns, unsigned poll_interval)
-{
- struct ath9k_platform_data *ap9x_wmac_data;
-
- if (!(ap9x_wmac_data = ap9x_pci_get_wmac_data(wmac)))
- return;
-
- ap9x_wmac_data->btns = btns;
- ap9x_wmac_data->num_btns = num_btns;
- ap9x_wmac_data->btn_poll_interval = poll_interval;
-}
-
-static int ap91_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch (PCI_SLOT(dev->devfn)) {
- case 0:
- dev->dev.platform_data = &ap9x_wmac0_data;
- break;
- }
-
- return 0;
-}
-
-__init void ap91_pci_init(u8 *cal_data, u8 *mac_addr)
-{
- if (cal_data)
- memcpy(ap9x_wmac0_data.eeprom_data, cal_data,
- sizeof(ap9x_wmac0_data.eeprom_data));
-
- if (mac_addr) {
- memcpy(ap9x_wmac0_mac, mac_addr, sizeof(ap9x_wmac0_mac));
- ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
- }
-
- ath79_pci_set_plat_dev_init(ap91_pci_plat_dev_init);
- ath79_register_pci();
-
- pci_enable_ath9k_fixup(0, ap9x_wmac0_data.eeprom_data);
-}
-
-__init void ap91_pci_init_simple(void)
-{
- ap91_pci_init(NULL, NULL);
- ap9x_wmac0_data.eeprom_name = "pci_wmac0.eeprom";
-}
-
-static int ap94_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch (PCI_SLOT(dev->devfn)) {
- case 17:
- dev->dev.platform_data = &ap9x_wmac0_data;
- break;
-
- case 18:
- dev->dev.platform_data = &ap9x_wmac1_data;
- break;
- }
-
- return 0;
-}
-
-__init void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
- u8 *cal_data1, u8 *mac_addr1)
-{
- if (cal_data0)
- memcpy(ap9x_wmac0_data.eeprom_data, cal_data0,
- sizeof(ap9x_wmac0_data.eeprom_data));
-
- if (cal_data1)
- memcpy(ap9x_wmac1_data.eeprom_data, cal_data1,
- sizeof(ap9x_wmac1_data.eeprom_data));
-
- if (mac_addr0) {
- memcpy(ap9x_wmac0_mac, mac_addr0, sizeof(ap9x_wmac0_mac));
- ap9x_wmac0_data.macaddr = ap9x_wmac0_mac;
- }
-
- if (mac_addr1) {
- memcpy(ap9x_wmac1_mac, mac_addr1, sizeof(ap9x_wmac1_mac));
- ap9x_wmac1_data.macaddr = ap9x_wmac1_mac;
- }
-
- ath79_pci_set_plat_dev_init(ap94_pci_plat_dev_init);
- ath79_register_pci();
-
- pci_enable_ath9k_fixup(17, ap9x_wmac0_data.eeprom_data);
- pci_enable_ath9k_fixup(18, ap9x_wmac1_data.eeprom_data);
-}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.h
deleted file mode 100644
index d2a045fc1c..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-ap9x-pci.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Atheros AP9X reference board PCI initialization
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_AP9X_PCI_H
-#define _ATH79_DEV_AP9X_PCI_H
-
-struct gpio_led;
-struct gpio_keys_button;
-struct ath9k_platform_data;
-
-#if defined(CONFIG_ATH79_DEV_AP9X_PCI)
-void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin);
-void ap9x_pci_setup_wmac_gpio(unsigned wmac, u32 mask, u32 val);
-void ap9x_pci_setup_wmac_leds(unsigned wmac, struct gpio_led *leds,
- int num_leds);
-void ap9x_pci_setup_wmac_btns(unsigned wmac, struct gpio_keys_button *btns,
- unsigned num_btns, unsigned poll_interval);
-struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac);
-
-void ap91_pci_init(u8 *cal_data, u8 *mac_addr);
-void ap91_pci_init_simple(void);
-void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
- u8 *cal_data1, u8 *mac_addr1);
-
-#else
-static inline void ap9x_pci_setup_wmac_led_pin(unsigned wmac, int pin) {}
-static inline void ap9x_pci_setup_wmac_gpio(unsigned wmac,
- u32 mask, u32 val) {}
-static inline void ap9x_pci_setup_wmac_leds(unsigned wmac,
- struct gpio_led *leds,
- int num_leds) {}
-static inline void ap9x_pci_setup_wmac_btns(unsigned wmac,
- struct gpio_keys_button *btns,
- unsigned num_btns,
- unsigned poll_interval) {}
-static inline struct ath9k_platform_data *ap9x_pci_get_wmac_data(unsigned wmac)
-{
- return NULL;
-}
-
-static inline void ap91_pci_init(u8 *cal_data, u8 *mac_addr) {}
-static inline void ap91_pci_init_simple(void) {}
-static inline void ap94_pci_init(u8 *cal_data0, u8 *mac_addr0,
- u8 *cal_data1, u8 *mac_addr1) {}
-#endif
-
-#endif /* _ATH79_DEV_AP9X_PCI_H */
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.c
deleted file mode 100644
index 4ade218f7e..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Atheros AR71xx DSA switch device support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-dsa.h"
-
-static struct platform_device ar71xx_dsa_switch_device = {
- .name = "dsa",
- .id = 0,
-};
-
-void __init ath79_register_dsa(struct device *netdev,
- struct device *miidev,
- struct dsa_platform_data *d)
-{
- int i;
-
- d->netdev = netdev;
- for (i = 0; i < d->nr_chips; i++)
- d->chip[i].host_dev = miidev;
-
- ar71xx_dsa_switch_device.dev.platform_data = d;
- platform_device_register(&ar71xx_dsa_switch_device);
-}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.h
deleted file mode 100644
index 3730202e8d..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-dsa.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Atheros AR71xx DSA switch device support
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_DSA_H
-#define _ATH79_DEV_DSA_H
-
-#include <net/dsa.h>
-
-void ath79_register_dsa(struct device *netdev,
- struct device *miidev,
- struct dsa_platform_data *d);
-
-#endif /* _ATH79_DEV_DSA_H */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
deleted file mode 100644
index 1e230bce61..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
+++ /dev/null
@@ -1,1262 +0,0 @@
-/*
- * Atheros AR71xx SoC platform devices
- *
- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros 2.6.15 BSP
- * Parts of this file are based on Atheros 2.6.31 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/clk.h>
-#include <linux/sizes.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/irq.h>
-
-#include "common.h"
-#include "dev-eth.h"
-
-unsigned char ath79_mac_base[ETH_ALEN] __initdata;
-
-static struct resource ath79_mdio0_resources[] = {
- {
- .name = "mdio_base",
- .flags = IORESOURCE_MEM,
- .start = AR71XX_GE0_BASE,
- .end = AR71XX_GE0_BASE + 0x200 - 1,
- }
-};
-
-struct ag71xx_mdio_platform_data ath79_mdio0_data;
-
-struct platform_device ath79_mdio0_device = {
- .name = "ag71xx-mdio",
- .id = 0,
- .resource = ath79_mdio0_resources,
- .num_resources = ARRAY_SIZE(ath79_mdio0_resources),
- .dev = {
- .platform_data = &ath79_mdio0_data,
- },
-};
-
-static struct resource ath79_mdio1_resources[] = {
- {
- .name = "mdio_base",
- .flags = IORESOURCE_MEM,
- .start = AR71XX_GE1_BASE,
- .end = AR71XX_GE1_BASE + 0x200 - 1,
- }
-};
-
-struct ag71xx_mdio_platform_data ath79_mdio1_data;
-
-struct platform_device ath79_mdio1_device = {
- .name = "ag71xx-mdio",
- .id = 1,
- .resource = ath79_mdio1_resources,
- .num_resources = ARRAY_SIZE(ath79_mdio1_resources),
- .dev = {
- .platform_data = &ath79_mdio1_data,
- },
-};
-
-static void ath79_set_pll(u32 cfg_reg, u32 pll_reg, u32 pll_val, u32 shift)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
-
- t = __raw_readl(base + cfg_reg);
- t &= ~(3 << shift);
- t |= (2 << shift);
- __raw_writel(t, base + cfg_reg);
- udelay(100);
-
- __raw_writel(pll_val, base + pll_reg);
-
- t |= (3 << shift);
- __raw_writel(t, base + cfg_reg);
- udelay(100);
-
- t &= ~(3 << shift);
- __raw_writel(t, base + cfg_reg);
- udelay(100);
-
- printk(KERN_DEBUG "ar71xx: pll_reg %#x: %#x\n",
- (unsigned int)(base + pll_reg), __raw_readl(base + pll_reg));
-
- iounmap(base);
-}
-
-static void __init ath79_mii_ctrl_set_if(unsigned int reg,
- unsigned int mii_if)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
-
- t = __raw_readl(base + reg);
- t &= ~(AR71XX_MII_CTRL_IF_MASK);
- t |= (mii_if & AR71XX_MII_CTRL_IF_MASK);
- __raw_writel(t, base + reg);
-
- iounmap(base);
-}
-
-static void ath79_mii_ctrl_set_speed(unsigned int reg, unsigned int speed)
-{
- void __iomem *base;
- unsigned int mii_speed;
- u32 t;
-
- switch (speed) {
- case SPEED_10:
- mii_speed = AR71XX_MII_CTRL_SPEED_10;
- break;
- case SPEED_100:
- mii_speed = AR71XX_MII_CTRL_SPEED_100;
- break;
- case SPEED_1000:
- mii_speed = AR71XX_MII_CTRL_SPEED_1000;
- break;
- default:
- BUG();
- }
-
- base = ioremap(AR71XX_MII_BASE, AR71XX_MII_SIZE);
-
- t = __raw_readl(base + reg);
- t &= ~(AR71XX_MII_CTRL_SPEED_MASK << AR71XX_MII_CTRL_SPEED_SHIFT);
- t |= mii_speed << AR71XX_MII_CTRL_SPEED_SHIFT;
- __raw_writel(t, base + reg);
-
- iounmap(base);
-}
-
-static unsigned long ar934x_get_mdio_ref_clock(void)
-{
- void __iomem *base;
- unsigned long ret;
- u32 t;
-
- base = ioremap(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
-
- ret = 0;
- t = __raw_readl(base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG);
- if (t & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL) {
- ret = 100 * 1000 * 1000;
- } else {
- struct clk *clk;
-
- clk = clk_get(NULL, "ref");
- if (!IS_ERR(clk))
- ret = clk_get_rate(clk);
- }
-
- iounmap(base);
-
- return ret;
-}
-
-void __init ath79_register_mdio(unsigned int id, u32 phy_mask)
-{
- struct platform_device *mdio_dev;
- struct ag71xx_mdio_platform_data *mdio_data;
- unsigned int max_id;
-
- if (ath79_soc == ATH79_SOC_AR9341 ||
- ath79_soc == ATH79_SOC_AR9342 ||
- ath79_soc == ATH79_SOC_AR9344 ||
- ath79_soc == ATH79_SOC_QCA9556 ||
- ath79_soc == ATH79_SOC_QCA9558 ||
- ath79_soc == ATH79_SOC_QCA956X)
- max_id = 1;
- else
- max_id = 0;
-
- if (id > max_id) {
- printk(KERN_ERR "ar71xx: invalid MDIO id %u\n", id);
- return;
- }
-
- switch (ath79_soc) {
- case ATH79_SOC_AR7241:
- case ATH79_SOC_AR9330:
- case ATH79_SOC_AR9331:
- case ATH79_SOC_QCA9533:
- case ATH79_SOC_TP9343:
- mdio_dev = &ath79_mdio1_device;
- mdio_data = &ath79_mdio1_data;
- break;
-
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- case ATH79_SOC_QCA9556:
- case ATH79_SOC_QCA9558:
- case ATH79_SOC_QCA956X:
- if (id == 0) {
- mdio_dev = &ath79_mdio0_device;
- mdio_data = &ath79_mdio0_data;
- } else {
- mdio_dev = &ath79_mdio1_device;
- mdio_data = &ath79_mdio1_data;
- }
- break;
-
- case ATH79_SOC_AR7242:
- ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG,
- AR7242_PLL_REG_ETH0_INT_CLOCK, 0x62000000,
- AR71XX_ETH0_PLL_SHIFT);
- /* fall through */
- default:
- mdio_dev = &ath79_mdio0_device;
- mdio_data = &ath79_mdio0_data;
- break;
- }
-
- mdio_data->phy_mask = phy_mask;
-
- switch (ath79_soc) {
- case ATH79_SOC_AR7240:
- mdio_data->is_ar7240 = 1;
- /* fall through */
- case ATH79_SOC_AR7241:
- mdio_data->builtin_switch = 1;
- break;
-
- case ATH79_SOC_AR9330:
- mdio_data->is_ar9330 = 1;
- /* fall through */
- case ATH79_SOC_AR9331:
- mdio_data->builtin_switch = 1;
- break;
-
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- if (id == 1) {
- mdio_data->builtin_switch = 1;
- mdio_data->ref_clock = ar934x_get_mdio_ref_clock();
- mdio_data->mdio_clock = 6250000;
- }
- mdio_data->is_ar934x = 1;
- break;
-
- case ATH79_SOC_QCA9533:
- case ATH79_SOC_TP9343:
- mdio_data->builtin_switch = 1;
- break;
-
- case ATH79_SOC_QCA9556:
- case ATH79_SOC_QCA9558:
- mdio_data->is_ar934x = 1;
- break;
-
- case ATH79_SOC_QCA956X:
- if (id == 1)
- mdio_data->builtin_switch = 1;
- mdio_data->is_ar934x = 1;
- break;
-
- default:
- break;
- }
-
- platform_device_register(mdio_dev);
-}
-
-struct ath79_eth_pll_data ath79_eth0_pll_data;
-struct ath79_eth_pll_data ath79_eth1_pll_data;
-
-static u32 ath79_get_eth_pll(unsigned int mac, int speed)
-{
- struct ath79_eth_pll_data *pll_data;
- u32 pll_val;
-
- switch (mac) {
- case 0:
- pll_data = &ath79_eth0_pll_data;
- break;
- case 1:
- pll_data = &ath79_eth1_pll_data;
- break;
- default:
- BUG();
- }
-
- switch (speed) {
- case SPEED_10:
- pll_val = pll_data->pll_10;
- break;
- case SPEED_100:
- pll_val = pll_data->pll_100;
- break;
- case SPEED_1000:
- pll_val = pll_data->pll_1000;
- break;
- default:
- BUG();
- }
-
- return pll_val;
-}
-
-static void ath79_set_speed_ge0(int speed)
-{
- u32 val = ath79_get_eth_pll(0, speed);
-
- ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH0_INT_CLOCK,
- val, AR71XX_ETH0_PLL_SHIFT);
- ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
-}
-
-static void ath79_set_speed_ge1(int speed)
-{
- u32 val = ath79_get_eth_pll(1, speed);
-
- ath79_set_pll(AR71XX_PLL_REG_SEC_CONFIG, AR71XX_PLL_REG_ETH1_INT_CLOCK,
- val, AR71XX_ETH1_PLL_SHIFT);
- ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
-}
-
-static void ar7242_set_speed_ge0(int speed)
-{
- u32 val = ath79_get_eth_pll(0, speed);
- void __iomem *base;
-
- base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
- __raw_writel(val, base + AR7242_PLL_REG_ETH0_INT_CLOCK);
- iounmap(base);
-}
-
-static void ar91xx_set_speed_ge0(int speed)
-{
- u32 val = ath79_get_eth_pll(0, speed);
-
- ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH0_INT_CLOCK,
- val, AR913X_ETH0_PLL_SHIFT);
- ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII0_CTRL, speed);
-}
-
-static void ar91xx_set_speed_ge1(int speed)
-{
- u32 val = ath79_get_eth_pll(1, speed);
-
- ath79_set_pll(AR913X_PLL_REG_ETH_CONFIG, AR913X_PLL_REG_ETH1_INT_CLOCK,
- val, AR913X_ETH1_PLL_SHIFT);
- ath79_mii_ctrl_set_speed(AR71XX_MII_REG_MII1_CTRL, speed);
-}
-
-static void ar934x_set_speed_ge0(int speed)
-{
- void __iomem *base;
- u32 val = ath79_get_eth_pll(0, speed);
-
- base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
- __raw_writel(val, base + AR934X_PLL_ETH_XMII_CONTROL_REG);
- iounmap(base);
-}
-
-static void qca955x_set_speed_xmii(int speed)
-{
- void __iomem *base;
- u32 val = ath79_get_eth_pll(0, speed);
-
- base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
- __raw_writel(val, base + QCA955X_PLL_ETH_XMII_CONTROL_REG);
- iounmap(base);
-}
-
-static void qca955x_set_speed_sgmii(int id, int speed)
-{
- void __iomem *base;
- u32 val = ath79_get_eth_pll(id, speed);
-
- base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
- __raw_writel(val, base + QCA955X_PLL_ETH_SGMII_CONTROL_REG);
- iounmap(base);
-}
-
-static void qca9556_set_speed_sgmii(int speed)
-{
- qca955x_set_speed_sgmii(0, speed);
-}
-
-static void qca9558_set_speed_sgmii(int speed)
-{
- qca955x_set_speed_sgmii(1, speed);
-}
-
-static void qca956x_set_speed_sgmii(int speed)
-{
- void __iomem *base;
- u32 val = ath79_get_eth_pll(0, speed);
-
- base = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
- __raw_writel(val, base + QCA955X_PLL_ETH_SGMII_CONTROL_REG);
- iounmap(base);
-}
-
-static void ath79_set_speed_dummy(int speed)
-{
-}
-
-static void ath79_ddr_flush_ge0(void)
-{
- ath79_ddr_wb_flush(0);
-}
-
-static void ath79_ddr_flush_ge1(void)
-{
- ath79_ddr_wb_flush(1);
-}
-
-static struct resource ath79_eth0_resources[] = {
- {
- .name = "mac_base",
- .flags = IORESOURCE_MEM,
- .start = AR71XX_GE0_BASE,
- .end = AR71XX_GE0_BASE + 0x200 - 1,
- }, {
- .name = "mac_irq",
- .flags = IORESOURCE_IRQ,
- .start = ATH79_CPU_IRQ(4),
- .end = ATH79_CPU_IRQ(4),
- },
-};
-
-struct ag71xx_platform_data ath79_eth0_data = {
- .reset_bit = AR71XX_RESET_GE0_MAC,
-};
-
-struct platform_device ath79_eth0_device = {
- .name = "ag71xx",
- .id = 0,
- .resource = ath79_eth0_resources,
- .num_resources = ARRAY_SIZE(ath79_eth0_resources),
- .dev = {
- .platform_data = &ath79_eth0_data,
- },
-};
-
-static struct resource ath79_eth1_resources[] = {
- {
- .name = "mac_base",
- .flags = IORESOURCE_MEM,
- .start = AR71XX_GE1_BASE,
- .end = AR71XX_GE1_BASE + 0x200 - 1,
- }, {
- .name = "mac_irq",
- .flags = IORESOURCE_IRQ,
- .start = ATH79_CPU_IRQ(5),
- .end = ATH79_CPU_IRQ(5),
- },
-};
-
-struct ag71xx_platform_data ath79_eth1_data = {
- .reset_bit = AR71XX_RESET_GE1_MAC,
-};
-
-struct platform_device ath79_eth1_device = {
- .name = "ag71xx",
- .id = 1,
- .resource = ath79_eth1_resources,
- .num_resources = ARRAY_SIZE(ath79_eth1_resources),
- .dev = {
- .platform_data = &ath79_eth1_data,
- },
-};
-
-struct ag71xx_switch_platform_data ath79_switch_data;
-
-#define AR71XX_PLL_VAL_1000 0x00110000
-#define AR71XX_PLL_VAL_100 0x00001099
-#define AR71XX_PLL_VAL_10 0x00991099
-
-#define AR724X_PLL_VAL_1000 0x00110000
-#define AR724X_PLL_VAL_100 0x00001099
-#define AR724X_PLL_VAL_10 0x00991099
-
-#define AR7242_PLL_VAL_1000 0x16000000
-#define AR7242_PLL_VAL_100 0x00000101
-#define AR7242_PLL_VAL_10 0x00001616
-
-#define AR913X_PLL_VAL_1000 0x1a000000
-#define AR913X_PLL_VAL_100 0x13000a44
-#define AR913X_PLL_VAL_10 0x00441099
-
-#define AR933X_PLL_VAL_1000 0x00110000
-#define AR933X_PLL_VAL_100 0x00001099
-#define AR933X_PLL_VAL_10 0x00991099
-
-#define AR934X_PLL_VAL_1000 0x16000000
-#define AR934X_PLL_VAL_100 0x00000101
-#define AR934X_PLL_VAL_10 0x00001616
-
-#define QCA956X_PLL_VAL_1000 0x03000000
-#define QCA956X_PLL_VAL_100 0x00000101
-#define QCA956X_PLL_VAL_10 0x00001919
-
-static void __init ath79_init_eth_pll_data(unsigned int id)
-{
- struct ath79_eth_pll_data *pll_data;
- u32 pll_10, pll_100, pll_1000;
-
- switch (id) {
- case 0:
- pll_data = &ath79_eth0_pll_data;
- break;
- case 1:
- pll_data = &ath79_eth1_pll_data;
- break;
- default:
- BUG();
- }
-
- switch (ath79_soc) {
- case ATH79_SOC_AR7130:
- case ATH79_SOC_AR7141:
- case ATH79_SOC_AR7161:
- pll_10 = AR71XX_PLL_VAL_10;
- pll_100 = AR71XX_PLL_VAL_100;
- pll_1000 = AR71XX_PLL_VAL_1000;
- break;
-
- case ATH79_SOC_AR7240:
- case ATH79_SOC_AR7241:
- pll_10 = AR724X_PLL_VAL_10;
- pll_100 = AR724X_PLL_VAL_100;
- pll_1000 = AR724X_PLL_VAL_1000;
- break;
-
- case ATH79_SOC_AR7242:
- pll_10 = AR7242_PLL_VAL_10;
- pll_100 = AR7242_PLL_VAL_100;
- pll_1000 = AR7242_PLL_VAL_1000;
- break;
-
- case ATH79_SOC_AR9130:
- case ATH79_SOC_AR9132:
- pll_10 = AR913X_PLL_VAL_10;
- pll_100 = AR913X_PLL_VAL_100;
- pll_1000 = AR913X_PLL_VAL_1000;
- break;
-
- case ATH79_SOC_AR9330:
- case ATH79_SOC_AR9331:
- pll_10 = AR933X_PLL_VAL_10;
- pll_100 = AR933X_PLL_VAL_100;
- pll_1000 = AR933X_PLL_VAL_1000;
- break;
-
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- case ATH79_SOC_QCA9533:
- case ATH79_SOC_QCA9556:
- case ATH79_SOC_QCA9558:
- case ATH79_SOC_TP9343:
- pll_10 = AR934X_PLL_VAL_10;
- pll_100 = AR934X_PLL_VAL_100;
- pll_1000 = AR934X_PLL_VAL_1000;
- break;
-
- case ATH79_SOC_QCA956X:
- pll_10 = QCA956X_PLL_VAL_10;
- pll_100 = QCA956X_PLL_VAL_100;
- pll_1000 = QCA956X_PLL_VAL_1000;
- break;
-
- default:
- BUG();
- }
-
- if (!pll_data->pll_10)
- pll_data->pll_10 = pll_10;
-
- if (!pll_data->pll_100)
- pll_data->pll_100 = pll_100;
-
- if (!pll_data->pll_1000)
- pll_data->pll_1000 = pll_1000;
-}
-
-static int __init ath79_setup_phy_if_mode(unsigned int id,
- struct ag71xx_platform_data *pdata)
-{
- unsigned int mii_if;
-
- switch (id) {
- case 0:
- switch (ath79_soc) {
- case ATH79_SOC_AR7130:
- case ATH79_SOC_AR7141:
- case ATH79_SOC_AR7161:
- case ATH79_SOC_AR9130:
- case ATH79_SOC_AR9132:
- switch (pdata->phy_if_mode) {
- case PHY_INTERFACE_MODE_MII:
- mii_if = AR71XX_MII0_CTRL_IF_MII;
- break;
- case PHY_INTERFACE_MODE_GMII:
- mii_if = AR71XX_MII0_CTRL_IF_GMII;
- break;
- case PHY_INTERFACE_MODE_RGMII:
- mii_if = AR71XX_MII0_CTRL_IF_RGMII;
- break;
- case PHY_INTERFACE_MODE_RMII:
- mii_if = AR71XX_MII0_CTRL_IF_RMII;
- break;
- default:
- return -EINVAL;
- }
- ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII0_CTRL, mii_if);
- break;
-
- case ATH79_SOC_AR7240:
- case ATH79_SOC_AR7241:
- case ATH79_SOC_AR9330:
- case ATH79_SOC_AR9331:
- case ATH79_SOC_QCA9533:
- case ATH79_SOC_TP9343:
- pdata->phy_if_mode = PHY_INTERFACE_MODE_MII;
- break;
-
- case ATH79_SOC_AR7242:
- /* FIXME */
-
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- switch (pdata->phy_if_mode) {
- case PHY_INTERFACE_MODE_MII:
- case PHY_INTERFACE_MODE_GMII:
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RMII:
- break;
- default:
- return -EINVAL;
- }
- break;
-
- case ATH79_SOC_QCA9556:
- case ATH79_SOC_QCA9558:
- case ATH79_SOC_QCA956X:
- switch (pdata->phy_if_mode) {
- case PHY_INTERFACE_MODE_MII:
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_SGMII:
- break;
- default:
- return -EINVAL;
- }
- break;
-
- default:
- BUG();
- }
- break;
- case 1:
- switch (ath79_soc) {
- case ATH79_SOC_AR7130:
- case ATH79_SOC_AR7141:
- case ATH79_SOC_AR7161:
- case ATH79_SOC_AR9130:
- case ATH79_SOC_AR9132:
- switch (pdata->phy_if_mode) {
- case PHY_INTERFACE_MODE_RMII:
- mii_if = AR71XX_MII1_CTRL_IF_RMII;
- break;
- case PHY_INTERFACE_MODE_RGMII:
- mii_if = AR71XX_MII1_CTRL_IF_RGMII;
- break;
- default:
- return -EINVAL;
- }
- ath79_mii_ctrl_set_if(AR71XX_MII_REG_MII1_CTRL, mii_if);
- break;
-
- case ATH79_SOC_AR7240:
- case ATH79_SOC_AR7241:
- case ATH79_SOC_AR9330:
- case ATH79_SOC_AR9331:
- case ATH79_SOC_TP9343:
- pdata->phy_if_mode = PHY_INTERFACE_MODE_GMII;
- break;
-
- case ATH79_SOC_AR7242:
- /* FIXME */
-
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- case ATH79_SOC_QCA9533:
- case ATH79_SOC_QCA956X:
- switch (pdata->phy_if_mode) {
- case PHY_INTERFACE_MODE_MII:
- case PHY_INTERFACE_MODE_GMII:
- break;
- default:
- return -EINVAL;
- }
- break;
-
- case ATH79_SOC_QCA9556:
- case ATH79_SOC_QCA9558:
- switch (pdata->phy_if_mode) {
- case PHY_INTERFACE_MODE_MII:
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_SGMII:
- break;
- default:
- return -EINVAL;
- }
- break;
-
- default:
- BUG();
- }
- break;
- }
-
- return 0;
-}
-
-void __init ath79_setup_ar933x_phy4_switch(bool mac, bool mdio)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(AR933X_GMAC_BASE, AR933X_GMAC_SIZE);
-
- t = __raw_readl(base + AR933X_GMAC_REG_ETH_CFG);
- t &= ~(AR933X_ETH_CFG_SW_PHY_SWAP | AR933X_ETH_CFG_SW_PHY_ADDR_SWAP);
- if (mac)
- t |= AR933X_ETH_CFG_SW_PHY_SWAP;
- if (mdio)
- t |= AR933X_ETH_CFG_SW_PHY_ADDR_SWAP;
- __raw_writel(t, base + AR933X_GMAC_REG_ETH_CFG);
-
- iounmap(base);
-}
-
-void __init ath79_setup_ar934x_eth_cfg(u32 mask)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
-
- t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
-
- t &= ~(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_MII_GMAC0 |
- AR934X_ETH_CFG_GMII_GMAC0 |
- AR934X_ETH_CFG_SW_ONLY_MODE |
- AR934X_ETH_CFG_SW_PHY_SWAP);
-
- t |= mask;
-
- __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
- /* flush write */
- __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
-
- iounmap(base);
-}
-
-void __init ath79_setup_ar934x_eth_rx_delay(unsigned int rxd,
- unsigned int rxdv)
-{
- void __iomem *base;
- u32 t;
-
- rxd &= AR934X_ETH_CFG_RXD_DELAY_MASK;
- rxdv &= AR934X_ETH_CFG_RDV_DELAY_MASK;
-
- base = ioremap(AR934X_GMAC_BASE, AR934X_GMAC_SIZE);
-
- t = __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
-
- t &= ~(AR934X_ETH_CFG_RXD_DELAY_MASK << AR934X_ETH_CFG_RXD_DELAY_SHIFT |
- AR934X_ETH_CFG_RDV_DELAY_MASK << AR934X_ETH_CFG_RDV_DELAY_SHIFT);
-
- t |= (rxd << AR934X_ETH_CFG_RXD_DELAY_SHIFT |
- rxdv << AR934X_ETH_CFG_RDV_DELAY_SHIFT);
-
- __raw_writel(t, base + AR934X_GMAC_REG_ETH_CFG);
- /* flush write */
- __raw_readl(base + AR934X_GMAC_REG_ETH_CFG);
-
- iounmap(base);
-}
-
-void __init ath79_setup_qca955x_eth_cfg(u32 mask)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
- t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
-
- t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
-
- t |= mask;
-
- __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-
- iounmap(base);
-}
-
-void __init ath79_setup_qca956x_eth_cfg(u32 mask)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(QCA956X_GMAC_BASE, QCA956X_GMAC_SIZE);
-
- t = __raw_readl(base + QCA956X_GMAC_REG_ETH_CFG);
-
- t &= ~(QCA956X_ETH_CFG_SW_ONLY_MODE |
- QCA956X_ETH_CFG_SW_PHY_SWAP);
-
- t |= mask;
-
- __raw_writel(t, base + QCA956X_GMAC_REG_ETH_CFG);
- /* flush write */
- __raw_readl(base + QCA956X_GMAC_REG_ETH_CFG);
-
- iounmap(base);
-}
-
-static int ath79_eth_instance __initdata;
-void __init ath79_register_eth(unsigned int id)
-{
- struct platform_device *pdev;
- struct ag71xx_platform_data *pdata;
- int err;
-
- if (id > 1) {
- printk(KERN_ERR "ar71xx: invalid ethernet id %d\n", id);
- return;
- }
-
- ath79_init_eth_pll_data(id);
-
- if (id == 0)
- pdev = &ath79_eth0_device;
- else
- pdev = &ath79_eth1_device;
-
- pdata = pdev->dev.platform_data;
-
- pdata->max_frame_len = 1540;
- pdata->desc_pktlen_mask = 0xfff;
-
- err = ath79_setup_phy_if_mode(id, pdata);
- if (err) {
- printk(KERN_ERR
- "ar71xx: invalid PHY interface mode for GE%u\n", id);
- return;
- }
-
- if (id == 0)
- pdata->ddr_flush = ath79_ddr_flush_ge0;
- else
- pdata->ddr_flush = ath79_ddr_flush_ge1;
-
- switch (ath79_soc) {
- case ATH79_SOC_AR7130:
- if (id == 0)
- pdata->set_speed = ath79_set_speed_ge0;
- else
- pdata->set_speed = ath79_set_speed_ge1;
- break;
-
- case ATH79_SOC_AR7141:
- case ATH79_SOC_AR7161:
- if (id == 0)
- pdata->set_speed = ath79_set_speed_ge0;
- else
- pdata->set_speed = ath79_set_speed_ge1;
- pdata->has_gbit = 1;
- break;
-
- case ATH79_SOC_AR7242:
- if (id == 0) {
- pdata->reset_bit |= AR724X_RESET_GE0_MDIO |
- AR71XX_RESET_GE0_PHY;
- pdata->set_speed = ar7242_set_speed_ge0;
- } else {
- pdata->reset_bit |= AR724X_RESET_GE1_MDIO |
- AR71XX_RESET_GE1_PHY;
- pdata->set_speed = ath79_set_speed_dummy;
- }
- pdata->has_gbit = 1;
- pdata->is_ar724x = 1;
- break;
-
- case ATH79_SOC_AR7241:
- if (id == 0)
- pdata->reset_bit |= AR724X_RESET_GE0_MDIO;
- else
- pdata->reset_bit |= AR724X_RESET_GE1_MDIO;
- /* fall through */
- case ATH79_SOC_AR7240:
- if (id == 0) {
- pdata->reset_bit |= AR71XX_RESET_GE0_PHY;
- pdata->set_speed = ath79_set_speed_dummy;
-
- pdata->phy_mask = BIT(4);
- } else {
- pdata->reset_bit |= AR71XX_RESET_GE1_PHY;
- pdata->set_speed = ath79_set_speed_dummy;
-
- pdata->speed = SPEED_1000;
- pdata->duplex = DUPLEX_FULL;
- pdata->switch_data = &ath79_switch_data;
- pdata->use_flow_control = 1;
-
- ath79_switch_data.phy_poll_mask |= BIT(4);
- }
- pdata->has_gbit = 1;
- pdata->is_ar724x = 1;
- if (ath79_soc == ATH79_SOC_AR7240)
- pdata->is_ar7240 = 1;
- break;
-
- case ATH79_SOC_AR9132:
- pdata->has_gbit = 1;
- /* fall through */
- case ATH79_SOC_AR9130:
- if (id == 0)
- pdata->set_speed = ar91xx_set_speed_ge0;
- else
- pdata->set_speed = ar91xx_set_speed_ge1;
- pdata->is_ar91xx = 1;
- break;
-
- case ATH79_SOC_AR9330:
- case ATH79_SOC_AR9331:
- if (id == 0) {
- pdata->reset_bit = AR933X_RESET_GE0_MAC |
- AR933X_RESET_GE0_MDIO;
- pdata->set_speed = ath79_set_speed_dummy;
-
- pdata->phy_mask = BIT(4);
- } else {
- pdata->reset_bit = AR933X_RESET_GE1_MAC |
- AR933X_RESET_GE1_MDIO;
- pdata->set_speed = ath79_set_speed_dummy;
-
- pdata->speed = SPEED_1000;
- pdata->has_gbit = 1;
- pdata->duplex = DUPLEX_FULL;
- pdata->switch_data = &ath79_switch_data;
- pdata->use_flow_control = 1;
-
- ath79_switch_data.phy_poll_mask |= BIT(4);
- }
-
- pdata->is_ar724x = 1;
- break;
-
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- case ATH79_SOC_QCA9533:
- if (id == 0) {
- pdata->reset_bit = AR934X_RESET_GE0_MAC |
- AR934X_RESET_GE0_MDIO;
- pdata->set_speed = ar934x_set_speed_ge0;
-
- if (ath79_soc == ATH79_SOC_QCA9533)
- pdata->disable_inline_checksum_engine = 1;
- } else {
- pdata->reset_bit = AR934X_RESET_GE1_MAC |
- AR934X_RESET_GE1_MDIO;
- pdata->set_speed = ath79_set_speed_dummy;
-
- pdata->switch_data = &ath79_switch_data;
-
- /* reset the built-in switch */
- ath79_device_reset_set(AR934X_RESET_ETH_SWITCH);
- ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH);
- }
-
- pdata->has_gbit = 1;
- pdata->is_ar724x = 1;
-
- pdata->max_frame_len = SZ_16K - 1;
- pdata->desc_pktlen_mask = SZ_16K - 1;
- break;
-
- case ATH79_SOC_TP9343:
- if (id == 0) {
- pdata->reset_bit = AR933X_RESET_GE0_MAC |
- AR933X_RESET_GE0_MDIO;
- pdata->set_speed = ath79_set_speed_dummy;
-
- if (!pdata->phy_mask)
- pdata->phy_mask = BIT(4);
- } else {
- pdata->reset_bit = AR933X_RESET_GE1_MAC |
- AR933X_RESET_GE1_MDIO;
- pdata->set_speed = ath79_set_speed_dummy;
-
- pdata->speed = SPEED_1000;
- pdata->duplex = DUPLEX_FULL;
- pdata->switch_data = &ath79_switch_data;
- pdata->use_flow_control = 1;
-
- ath79_switch_data.phy_poll_mask |= BIT(4);
- }
-
- pdata->has_gbit = 1;
- pdata->is_ar724x = 1;
- break;
-
- case ATH79_SOC_QCA9556:
- case ATH79_SOC_QCA9558:
- if (id == 0) {
- pdata->reset_bit = QCA955X_RESET_GE0_MAC |
- QCA955X_RESET_GE0_MDIO;
- pdata->set_speed = qca955x_set_speed_xmii;
-
- /* QCA9556 only has SGMII interface */
- if (ath79_soc == ATH79_SOC_QCA9556)
- pdata->set_speed = qca9556_set_speed_sgmii;
- } else {
- pdata->reset_bit = QCA955X_RESET_GE1_MAC |
- QCA955X_RESET_GE1_MDIO;
- pdata->set_speed = qca9558_set_speed_sgmii;
- }
-
- pdata->has_gbit = 1;
- pdata->is_ar724x = 1;
-
- /*
- * Limit the maximum frame length to 4095 bytes.
- * Although the documentation says that the hardware
- * limit is 16383 bytes but that does not work in
- * practice. It seems that the hardware only updates
- * the lowest 12 bits of the packet length field
- * in the RX descriptor.
- */
- pdata->max_frame_len = SZ_4K - 1;
- pdata->desc_pktlen_mask = SZ_16K - 1;
- break;
-
- case ATH79_SOC_QCA956X:
- if (id == 0) {
- pdata->reset_bit = QCA955X_RESET_GE0_MAC |
- QCA955X_RESET_GE0_MDIO;
-
- if (pdata->phy_if_mode == PHY_INTERFACE_MODE_SGMII)
- pdata->set_speed = qca956x_set_speed_sgmii;
- else
- pdata->set_speed = ar934x_set_speed_ge0;
-
- pdata->disable_inline_checksum_engine = 1;
- } else {
- pdata->reset_bit = QCA955X_RESET_GE1_MAC |
- QCA955X_RESET_GE1_MDIO;
-
- pdata->set_speed = ath79_set_speed_dummy;
-
- pdata->switch_data = &ath79_switch_data;
-
- pdata->speed = SPEED_1000;
- pdata->duplex = DUPLEX_FULL;
- pdata->use_flow_control = 1;
-
- /* reset the built-in switch */
- ath79_device_reset_set(AR934X_RESET_ETH_SWITCH);
- ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH);
- }
-
- pdata->has_gbit = 1;
- pdata->is_ar724x = 1;
- break;
-
- default:
- BUG();
- }
-
- switch (pdata->phy_if_mode) {
- case PHY_INTERFACE_MODE_GMII:
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_SGMII:
- if (!pdata->has_gbit) {
- printk(KERN_ERR "ar71xx: no gbit available on eth%d\n",
- id);
- return;
- }
- /* fallthrough */
- default:
- break;
- }
-
- if (!is_valid_ether_addr(pdata->mac_addr)) {
- random_ether_addr(pdata->mac_addr);
- printk(KERN_DEBUG
- "ar71xx: using random MAC address for eth%d\n",
- ath79_eth_instance);
- }
-
- if (pdata->mii_bus_dev == NULL) {
- switch (ath79_soc) {
- case ATH79_SOC_AR9341:
- case ATH79_SOC_AR9342:
- case ATH79_SOC_AR9344:
- if (id == 0)
- pdata->mii_bus_dev = &ath79_mdio0_device.dev;
- else
- pdata->mii_bus_dev = &ath79_mdio1_device.dev;
- break;
-
- case ATH79_SOC_AR7241:
- case ATH79_SOC_AR9330:
- case ATH79_SOC_AR9331:
- case ATH79_SOC_QCA9533:
- case ATH79_SOC_TP9343:
- pdata->mii_bus_dev = &ath79_mdio1_device.dev;
- break;
-
- case ATH79_SOC_QCA9556:
- case ATH79_SOC_QCA9558:
- /* don't assign any MDIO device by default */
- break;
-
- case ATH79_SOC_QCA956X:
- if (pdata->phy_if_mode != PHY_INTERFACE_MODE_SGMII)
- pdata->mii_bus_dev = &ath79_mdio1_device.dev;
- break;
-
- default:
- pdata->mii_bus_dev = &ath79_mdio0_device.dev;
- break;
- }
- }
-
- /* Reset the device */
- ath79_device_reset_set(pdata->reset_bit);
- msleep(100);
-
- ath79_device_reset_clear(pdata->reset_bit);
- msleep(100);
-
- platform_device_register(pdev);
- ath79_eth_instance++;
-}
-
-void __init ath79_set_mac_base(unsigned char *mac)
-{
- memcpy(ath79_mac_base, mac, ETH_ALEN);
-}
-
-void __init ath79_parse_ascii_mac(char *mac_str, u8 *mac)
-{
- int t;
-
- t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
- &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
-
- if (t != ETH_ALEN)
- t = sscanf(mac_str, "%02hhx.%02hhx.%02hhx.%02hhx.%02hhx.%02hhx",
- &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
-
- if (t != ETH_ALEN || !is_valid_ether_addr(mac)) {
- memset(mac, 0, ETH_ALEN);
- printk(KERN_DEBUG "ar71xx: invalid mac address \"%s\"\n",
- mac_str);
- }
-}
-
-void __init ath79_extract_mac_reverse(u8 *ptr, u8 *out)
-{
- int i;
-
- for (i = 0; i < ETH_ALEN; i++) {
- out[i] = ptr[ETH_ALEN-i-1];
- }
-}
-
-static void __init ath79_set_mac_base_ascii(char *str)
-{
- u8 mac[ETH_ALEN];
-
- ath79_parse_ascii_mac(str, mac);
- ath79_set_mac_base(mac);
-}
-
-static int __init ath79_ethaddr_setup(char *str)
-{
- ath79_set_mac_base_ascii(str);
- return 1;
-}
-__setup("ethaddr=", ath79_ethaddr_setup);
-
-static int __init ath79_kmac_setup(char *str)
-{
- ath79_set_mac_base_ascii(str);
- return 1;
-}
-__setup("kmac=", ath79_kmac_setup);
-
-void __init ath79_init_mac(unsigned char *dst, const unsigned char *src,
- int offset)
-{
- int t;
-
- if (!dst)
- return;
-
- if (!src || !is_valid_ether_addr(src)) {
- memset(dst, '\0', ETH_ALEN);
- return;
- }
-
- t = (((u32) src[3]) << 16) + (((u32) src[4]) << 8) + ((u32) src[5]);
- t += offset;
-
- dst[0] = src[0];
- dst[1] = src[1];
- dst[2] = src[2];
- dst[3] = (t >> 16) & 0xff;
- dst[4] = (t >> 8) & 0xff;
- dst[5] = t & 0xff;
-}
-
-void __init ath79_init_local_mac(unsigned char *dst, const unsigned char *src)
-{
- int i;
-
- if (!dst)
- return;
-
- if (!src || !is_valid_ether_addr(src)) {
- memset(dst, '\0', ETH_ALEN);
- return;
- }
-
- for (i = 0; i < ETH_ALEN; i++)
- dst[i] = src[i];
- dst[0] |= 0x02;
-}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
deleted file mode 100644
index 4d78260fbe..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Atheros AR71xx SoC device definitions
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_ETH_H
-#define _ATH79_DEV_ETH_H
-
-#include <asm/mach-ath79/ag71xx_platform.h>
-
-struct platform_device;
-
-extern unsigned char ath79_mac_base[] __initdata;
-void ath79_parse_ascii_mac(char *mac_str, u8 *mac);
-void ath79_extract_mac_reverse(u8 *ptr, u8 *out);
-void ath79_init_mac(unsigned char *dst, const unsigned char *src,
- int offset);
-void ath79_init_local_mac(unsigned char *dst, const unsigned char *src);
-
-struct ath79_eth_pll_data {
- u32 pll_10;
- u32 pll_100;
- u32 pll_1000;
-};
-
-extern struct ath79_eth_pll_data ath79_eth0_pll_data;
-extern struct ath79_eth_pll_data ath79_eth1_pll_data;
-
-extern struct ag71xx_platform_data ath79_eth0_data;
-extern struct ag71xx_platform_data ath79_eth1_data;
-extern struct platform_device ath79_eth0_device;
-extern struct platform_device ath79_eth1_device;
-void ath79_register_eth(unsigned int id);
-
-extern struct ag71xx_switch_platform_data ath79_switch_data;
-
-extern struct ag71xx_mdio_platform_data ath79_mdio0_data;
-extern struct ag71xx_mdio_platform_data ath79_mdio1_data;
-extern struct platform_device ath79_mdio0_device;
-extern struct platform_device ath79_mdio1_device;
-void ath79_register_mdio(unsigned int id, u32 phy_mask);
-
-void ath79_setup_ar933x_phy4_switch(bool mac, bool mdio);
-void ath79_setup_ar934x_eth_cfg(u32 mask);
-void ath79_setup_ar934x_eth_rx_delay(unsigned int rxd, unsigned int rxdv);
-void ath79_setup_qca955x_eth_cfg(u32 mask);
-void ath79_setup_qca956x_eth_cfg(u32 mask);
-
-#endif /* _ATH79_DEV_ETH_H */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.c
deleted file mode 100644
index e53d97dcbf..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/concat.h>
-
-#include "dev-spi.h"
-#include "dev-m25p80.h"
-
-static struct spi_board_info ath79_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- },
- {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- }
-};
-
-static struct ath79_spi_platform_data ath79_spi_data;
-
-void __init ath79_register_m25p80(struct flash_platform_data *pdata)
-{
- ath79_spi_data.bus_num = 0;
- ath79_spi_data.num_chipselect = 1;
- ath79_spi_info[0].platform_data = pdata;
- ath79_register_spi(&ath79_spi_data, ath79_spi_info, 1);
-}
-
-static struct flash_platform_data *multi_pdata;
-
-static struct mtd_info *concat_devs[2] = { NULL, NULL };
-static struct work_struct mtd_concat_work;
-
-static void mtd_concat_add_work(struct work_struct *work)
-{
- struct mtd_info *mtd;
-
- mtd = mtd_concat_create(concat_devs, ARRAY_SIZE(concat_devs), "flash");
-
- mtd_device_register(mtd, multi_pdata->parts, multi_pdata->nr_parts);
-}
-
-static void mtd_concat_add(struct mtd_info *mtd)
-{
- static bool registered = false;
-
- if (registered)
- return;
-
- if (!strcmp(mtd->name, "spi0.0"))
- concat_devs[0] = mtd;
- else if (!strcmp(mtd->name, "spi0.1"))
- concat_devs[1] = mtd;
- else
- return;
-
- if (!concat_devs[0] || !concat_devs[1])
- return;
-
- registered = true;
- INIT_WORK(&mtd_concat_work, mtd_concat_add_work);
- schedule_work(&mtd_concat_work);
-}
-
-static void mtd_concat_remove(struct mtd_info *mtd)
-{
-}
-
-static void add_mtd_concat_notifier(void)
-{
- static struct mtd_notifier not = {
- .add = mtd_concat_add,
- .remove = mtd_concat_remove,
- };
-
- register_mtd_user(&not);
-}
-
-void __init ath79_register_m25p80_multi(struct flash_platform_data *pdata)
-{
- multi_pdata = pdata;
- add_mtd_concat_notifier();
- ath79_spi_data.bus_num = 0;
- ath79_spi_data.num_chipselect = 2;
- ath79_register_spi(&ath79_spi_data, ath79_spi_info, 2);
-}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.h
deleted file mode 100644
index 637b41a7d8..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-m25p80.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_M25P80_H
-#define _ATH79_DEV_M25P80_H
-
-#include <linux/spi/flash.h>
-
-void ath79_register_m25p80(struct flash_platform_data *pdata) __init;
-void ath79_register_m25p80_multi(struct flash_platform_data *pdata) __init;
-
-#endif /* _ATH79_DEV_M25P80_H */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.c
deleted file mode 100644
index 9b5256ecc2..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Atheros AR934X SoCs built-in NAND flash controller support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/dma-mapping.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/platform/ar934x_nfc.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "dev-nfc.h"
-
-static struct resource ath79_nfc_resources[2];
-static u64 ar934x_nfc_dmamask = DMA_BIT_MASK(32);
-static struct ar934x_nfc_platform_data ath79_nfc_data;
-
-static struct platform_device ath79_nfc_device = {
- .name = AR934X_NFC_DRIVER_NAME,
- .id = -1,
- .resource = ath79_nfc_resources,
- .num_resources = ARRAY_SIZE(ath79_nfc_resources),
- .dev = {
- .dma_mask = &ar934x_nfc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &ath79_nfc_data,
- },
-};
-
-static void __init ath79_nfc_init_resource(struct resource res[2],
- unsigned long base,
- unsigned long size,
- int irq)
-{
- memset(res, 0, sizeof(struct resource) * 2);
-
- res[0].flags = IORESOURCE_MEM;
- res[0].start = base;
- res[0].end = base + size - 1;
-
- res[1].flags = IORESOURCE_IRQ;
- res[1].start = irq;
- res[1].end = irq;
-}
-
-static void ar934x_nfc_hw_reset(bool active)
-{
- if (active) {
- ath79_device_reset_set(AR934X_RESET_NANDF);
- udelay(100);
-
- ath79_device_reset_set(AR934X_RESET_ETH_SWITCH_ANALOG);
- udelay(250);
- } else {
- ath79_device_reset_clear(AR934X_RESET_ETH_SWITCH_ANALOG);
- udelay(250);
-
- ath79_device_reset_clear(AR934X_RESET_NANDF);
- udelay(100);
- }
-}
-
-static void ar934x_nfc_setup(void)
-{
- ath79_nfc_data.hw_reset = ar934x_nfc_hw_reset;
-
- ath79_nfc_init_resource(ath79_nfc_resources,
- AR934X_NFC_BASE, AR934X_NFC_SIZE,
- ATH79_MISC_IRQ(21));
-
- platform_device_register(&ath79_nfc_device);
-}
-
-static void qca955x_nfc_hw_reset(bool active)
-{
- if (active) {
- ath79_device_reset_set(QCA955X_RESET_NANDF);
- udelay(250);
- } else {
- ath79_device_reset_clear(QCA955X_RESET_NANDF);
- udelay(100);
- }
-}
-
-static void qca955x_nfc_setup(void)
-{
- ath79_nfc_data.hw_reset = qca955x_nfc_hw_reset;
-
- ath79_nfc_init_resource(ath79_nfc_resources,
- QCA955X_NFC_BASE, QCA955X_NFC_SIZE,
- ATH79_MISC_IRQ(21));
-
- platform_device_register(&ath79_nfc_device);
-}
-
-void __init ath79_nfc_set_select_chip(void (*f)(int chip_no))
-{
- ath79_nfc_data.select_chip = f;
-}
-
-void __init ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd))
-{
- ath79_nfc_data.scan_fixup = f;
-}
-
-void __init ath79_nfc_set_swap_dma(bool enable)
-{
- ath79_nfc_data.swap_dma = enable;
-}
-
-void __init ath79_nfc_set_ecc_mode(enum ar934x_nfc_ecc_mode mode)
-{
- ath79_nfc_data.ecc_mode = mode;
-}
-
-void __init ath79_nfc_set_parts(struct mtd_partition *parts, int nr_parts)
-{
- ath79_nfc_data.parts = parts;
- ath79_nfc_data.nr_parts = nr_parts;
-}
-
-void __init ath79_register_nfc(void)
-{
- if (soc_is_ar934x())
- ar934x_nfc_setup();
- else if (soc_is_qca955x())
- qca955x_nfc_setup();
- else
- BUG();
-}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.h b/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.h
deleted file mode 100644
index 3a1c88fe98..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-nfc.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Atheros AR934X SoCs built-in NAND Flash Controller support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_DEV_NFC_H
-#define _ATH79_DEV_NFC_H
-
-struct mtd_partition;
-enum ar934x_nfc_ecc_mode;
-
-#ifdef CONFIG_ATH79_DEV_NFC
-void ath79_nfc_set_parts(struct mtd_partition *parts, int nr_parts);
-void ath79_nfc_set_select_chip(void (*f)(int chip_no));
-void ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd));
-void ath79_nfc_set_swap_dma(bool enable);
-void ath79_nfc_set_ecc_mode(enum ar934x_nfc_ecc_mode mode);
-void ath79_register_nfc(void);
-#else
-static inline void ath79_nfc_set_parts(struct mtd_partition *parts,
- int nr_parts) {}
-static inline void ath79_nfc_set_select_chip(void (*f)(int chip_no)) {}
-static inline void ath79_nfc_set_scan_fixup(int (*f)(struct mtd_info *mtd)) {}
-static inline void ath79_nfc_set_swap_dma(bool enable) {}
-static inline void ath79_nfc_set_ecc_mode(enum ar934x_nfc_ecc_mode mode) {}
-static inline void ath79_register_nfc(void) {}
-#endif
-
-#endif /* _ATH79_DEV_NFC_H */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-a60.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-a60.c
deleted file mode 100644
index 084a4e4cc0..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-a60.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * OpenMesh A60 support
- *
- * Copyright (C) 2013 Marek Lindner <marek@open-mesh.com>
- * Copyright (C) 2014-2017 Sven Eckelmann <sven@open-mesh.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-gpio-buttons.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "dev-usb.h"
-
-#define A60_GPIO_LED_RED 22
-#define A60_GPIO_LED_GREEN 23
-#define A60_GPIO_LED_BLUE 13
-
-#define A60_GPIO_BTN_RESET 17
-
-#define A60_KEYS_POLL_INTERVAL 20 /* msecs */
-#define A60_KEYS_DEBOUNCE_INTERVAL (3 * A60_KEYS_POLL_INTERVAL)
-
-#define A60_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led a40_leds_gpio[] __initdata = {
- {
- .name = "a40:red:status",
- .gpio = A60_GPIO_LED_RED,
- }, {
- .name = "a40:green:status",
- .gpio = A60_GPIO_LED_GREEN,
- }, {
- .name = "a40:blue:status",
- .gpio = A60_GPIO_LED_BLUE,
- }
-};
-
-static struct gpio_led a60_leds_gpio[] __initdata = {
- {
- .name = "a60:red:status",
- .gpio = A60_GPIO_LED_RED,
- }, {
- .name = "a60:green:status",
- .gpio = A60_GPIO_LED_GREEN,
- }, {
- .name = "a60:blue:status",
- .gpio = A60_GPIO_LED_BLUE,
- }
-};
-
-static struct gpio_keys_button a60_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = A60_KEYS_DEBOUNCE_INTERVAL,
- .gpio = A60_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct at803x_platform_data a60_at803x_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 1,
- .enable_rgmii_tx_delay = 1,
-};
-
-static struct mdio_board_info a60_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 1,
- .platform_data = &a60_at803x_data,
- },
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 2,
- .platform_data = &a60_at803x_data,
- },
-};
-
-static void __init a60_setup_qca955x_eth_cfg(u32 mask,
- unsigned int rxd,
- unsigned int rxdv,
- unsigned int txd,
- unsigned int txe)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
- t = mask;
- t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT;
- t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT;
- t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT;
- t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT;
-
- __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-
- iounmap(base);
-}
-
-static void __init a60_setup_common(void)
-{
- u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
- u8 mac[6];
-
- ath79_register_usb();
-
- ath79_register_m25p80(NULL);
- ath79_register_gpio_keys_polled(-1, A60_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(a60_gpio_keys),
- a60_gpio_keys);
-
- ath79_init_mac(mac, art, 0x02);
- ath79_register_wmac(art + A60_WMAC_CALDATA_OFFSET, mac);
-
- a60_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(a60_mdio0_info, ARRAY_SIZE(a60_mdio0_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00);
- ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01);
-
- /* GMAC0 is connected to the PHY1 */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_mask = BIT(1);
- ath79_eth0_pll_data.pll_1000 = 0x82000101;
- ath79_eth0_pll_data.pll_100 = 0x80000101;
- ath79_eth0_pll_data.pll_10 = 0x80001313;
- ath79_register_eth(0);
-
- /* GMAC1 is connected to MDIO1 in SGMII mode */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth1_data.phy_mask = BIT(2);
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
- ath79_eth1_pll_data.pll_100 = 0x80000101;
- ath79_eth1_pll_data.pll_10 = 0x80001313;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_register_eth(1);
-
- ath79_register_pci();
-}
-
-static void __init a40_setup(void)
-{
- ath79_register_leds_gpio(-1, ARRAY_SIZE(a40_leds_gpio), a40_leds_gpio);
- a60_setup_common();
-}
-
-MIPS_MACHINE(ATH79_MACH_A40, "A40", "OpenMesh A40", a40_setup);
-
-static void __init a60_setup(void)
-{
- ath79_register_leds_gpio(-1, ARRAY_SIZE(a60_leds_gpio), a60_leds_gpio);
- a60_setup_common();
-}
-
-MIPS_MACHINE(ATH79_MACH_A60, "A60", "OpenMesh A60", a60_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap120c.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap120c.c
deleted file mode 100644
index 032261f751..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap120c.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * ALFA Network AP120C board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2016 Luka Perkov <luka@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/ar8216_platform.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-ap9x-pci.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define ALFA_AP120C_GPIO_LED 0
-
-#define ALFA_AP120C_GPIO_BUTTON_WIFI 16
-
-#define ALFA_AP120C_GPIO_WATCH_DOG 20
-
-#define ALFA_AP120C_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ALFA_AP120C_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP120C_KEYS_POLL_INTERVAL)
-
-#define ALFA_AP120C_MAC_OFFSET 0x1002
-#define ALFA_AP120C_CAL0_OFFSET 0x1000
-
-static struct gpio_keys_button alfa_ap120c_gpio_keys[] __initdata = {
- {
- .desc = "Wireless button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = ALFA_AP120C_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ALFA_AP120C_GPIO_BUTTON_WIFI,
- .active_low = 1,
- }
-};
-
-static struct gpio_led alfa_ap120c_leds_gpio[] __initdata = {
- {
- .name = "ap120c:red:wlan",
- .gpio = ALFA_AP120C_GPIO_LED,
- .active_low = 0,
- }
-};
-
-static struct ar8327_pad_cfg ap120c_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data ap120c_ar8327_data = {
- .pad0_cfg = &ap120c_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info ap120c_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &ap120c_ar8327_data,
- },
-};
-
-static struct flash_platform_data flash __initdata = { NULL, NULL, 0 };
-
-#define ALFA_AP120C_LAN_PHYMASK BIT(5)
-#define ALFA_AP120C_MDIO_PHYMASK ALFA_AP120C_LAN_PHYMASK
-
-static void __init alfa_ap120c_init(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 mac[ETH_ALEN];
-
- struct ath9k_platform_data *pdata;
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(alfa_ap120c_leds_gpio),
- alfa_ap120c_leds_gpio);
- ath79_register_gpio_keys_polled(-1, ALFA_AP120C_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(alfa_ap120c_gpio_keys),
- alfa_ap120c_gpio_keys);
-
- ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
- AR71XX_GPIO_FUNC_SPI_CS2_EN);
-
- ath79_register_m25p80_multi(&flash);
-
- ath79_init_mac(mac, art + ALFA_AP120C_MAC_OFFSET, 1);
- ath79_register_wmac(art + ALFA_AP120C_CAL0_OFFSET, mac);
-
- ath79_init_mac(mac, art + ALFA_AP120C_MAC_OFFSET, 2);
- ap91_pci_init(NULL, mac);
- pdata = ap9x_pci_get_wmac_data(0);
- if (!pdata) {
- pr_err("ap120c: unable to get address of wlan data\n");
- return;
- }
- pdata->use_eeprom = true;
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- BIT(15) | BIT(17) | BIT(19) | BIT(21));
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + ALFA_AP120C_MAC_OFFSET, 0);
-
- mdiobus_register_board_info(ap120c_mdio0_info, ARRAY_SIZE(ap120c_mdio0_info));
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = ALFA_AP120C_LAN_PHYMASK;
-
- ath79_eth0_pll_data.pll_1000 = 0x42000000;
- ath79_eth0_pll_data.pll_10 = 0x00001313;
-
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_ALFA_AP120C, "ALFA-AP120C", "ALFA Network AP120C",
- alfa_ap120c_init);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap96.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap96.c
deleted file mode 100644
index 531e5fb18e..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-ap96.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * ALFA Network AP96 board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/mmc_spi.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define ALFA_AP96_GPIO_PCIE_RESET 2
-#define ALFA_AP96_GPIO_SIM_DETECT 3
-#define ALFA_AP96_GPIO_MICROSD_CD 4
-#define ALFA_AP96_GPIO_PCIE_W_DISABLE 5
-
-#define ALFA_AP96_GPIO_BUTTON_RESET 11
-
-#define ALFA_AP96_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ALFA_AP96_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_AP96_KEYS_POLL_INTERVAL)
-
-static struct gpio_keys_button alfa_ap96_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ALFA_AP96_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ALFA_AP96_GPIO_BUTTON_RESET,
- .active_low = 1,
- }
-};
-
-static struct mmc_spi_platform_data alfa_ap96_mmc_data = {
- .flags = MMC_SPI_USE_CD_GPIO,
- .cd_gpio = ALFA_AP96_GPIO_MICROSD_CD,
- .cd_debounce = 1,
- .caps = MMC_CAP_NEEDS_POLL,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct spi_board_info alfa_ap96_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- }, {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 25000000,
- .modalias = "mmc_spi",
- .platform_data = &alfa_ap96_mmc_data,
- }, {
- .bus_num = 0,
- .chip_select = 2,
- .max_speed_hz = 6250000,
- .modalias = "rtc-pcf2123",
- },
-};
-
-static struct ath79_spi_platform_data alfa_ap96_spi_data = {
- .bus_num = 0,
- .num_chipselect = 3,
-};
-
-static void __init alfa_ap96_gpio_setup(void)
-{
- ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
- AR71XX_GPIO_FUNC_SPI_CS2_EN);
-
- gpio_request(ALFA_AP96_GPIO_MICROSD_CD, "microSD CD");
- gpio_direction_input(ALFA_AP96_GPIO_MICROSD_CD);
- gpio_request(ALFA_AP96_GPIO_PCIE_RESET, "PCIe reset");
- gpio_direction_output(ALFA_AP96_GPIO_PCIE_RESET, 1);
- gpio_request(ALFA_AP96_GPIO_PCIE_W_DISABLE, "PCIe write disable");
- gpio_direction_output(ALFA_AP96_GPIO_PCIE_W_DISABLE, 1);
-}
-
-#define ALFA_AP96_WAN_PHYMASK BIT(4)
-#define ALFA_AP96_LAN_PHYMASK BIT(5)
-#define ALFA_AP96_MDIO_PHYMASK (ALFA_AP96_LAN_PHYMASK | ALFA_AP96_WAN_PHYMASK)
-
-static void __init alfa_ap96_init(void)
-{
- alfa_ap96_gpio_setup();
-
- ath79_register_mdio(0, ~ALFA_AP96_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = ALFA_AP96_WAN_PHYMASK;
- ath79_eth1_pll_data.pll_1000 = 0x110000;
-
- ath79_register_eth(0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = ALFA_AP96_LAN_PHYMASK;
- ath79_eth1_pll_data.pll_1000 = 0x110000;
-
- ath79_register_eth(1);
-
- ath79_register_pci();
- ath79_register_spi(&alfa_ap96_spi_data, alfa_ap96_spi_info,
- ARRAY_SIZE(alfa_ap96_spi_info));
-
- ath79_register_gpio_keys_polled(-1, ALFA_AP96_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(alfa_ap96_gpio_keys),
- alfa_ap96_gpio_keys);
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_ALFA_AP96, "ALFA-AP96", "ALFA Network AP96",
- alfa_ap96_init);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-nx.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-nx.c
deleted file mode 100644
index a515f4f540..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-alfa-nx.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * ALFA Network N2/N5 board support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define ALFA_NX_GPIO_LED_2 17
-#define ALFA_NX_GPIO_LED_3 16
-#define ALFA_NX_GPIO_LED_5 12
-#define ALFA_NX_GPIO_LED_6 8
-#define ALFA_NX_GPIO_LED_7 6
-#define ALFA_NX_GPIO_LED_8 7
-
-#define ALFA_NX_GPIO_BTN_RESET 11
-
-#define ALFA_NX_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ALFA_NX_KEYS_DEBOUNCE_INTERVAL (3 * ALFA_NX_KEYS_POLL_INTERVAL)
-
-#define ALFA_NX_MAC0_OFFSET 0
-#define ALFA_NX_MAC1_OFFSET 6
-#define ALFA_NX_CALDATA_OFFSET 0x1000
-
-static struct gpio_keys_button alfa_nx_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ALFA_NX_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ALFA_NX_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct gpio_led alfa_nx_leds_gpio[] __initdata = {
- {
- .name = "alfa:green:led_2",
- .gpio = ALFA_NX_GPIO_LED_2,
- .active_low = 1,
- }, {
- .name = "alfa:green:led_3",
- .gpio = ALFA_NX_GPIO_LED_3,
- .active_low = 1,
- }, {
- .name = "alfa:red:led_5",
- .gpio = ALFA_NX_GPIO_LED_5,
- .active_low = 1,
- }, {
- .name = "alfa:amber:led_6",
- .gpio = ALFA_NX_GPIO_LED_6,
- .active_low = 1,
- }, {
- .name = "alfa:green:led_7",
- .gpio = ALFA_NX_GPIO_LED_7,
- .active_low = 1,
- }, {
- .name = "alfa:green:led_8",
- .gpio = ALFA_NX_GPIO_LED_8,
- .active_low = 1,
- }
-};
-
-static void __init alfa_nx_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
- AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(0, ARRAY_SIZE(alfa_nx_leds_gpio),
- alfa_nx_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ALFA_NX_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(alfa_nx_gpio_keys),
- alfa_nx_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + ALFA_NX_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr,
- art + ALFA_NX_MAC1_OFFSET, 0);
-
- /* WAN port */
- ath79_register_eth(0);
- /* LAN port */
- ath79_register_eth(1);
-
- ap91_pci_init(art + ALFA_NX_CALDATA_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_ALFA_NX, "ALFA-NX", "ALFA Network N2/N5",
- alfa_nx_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-all0258n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-all0258n.c
deleted file mode 100644
index 2495bcba79..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-all0258n.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Allnet ALL0258N support
- *
- * Copyright (C) 2011 Daniel Golle <dgolle@allnet.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-/* found via /sys/gpio/... try and error */
-#define ALL0258N_GPIO_BTN_RESET 1
-#define ALL0258N_GPIO_LED_RSSIHIGH 13
-#define ALL0258N_GPIO_LED_RSSIMEDIUM 15
-#define ALL0258N_GPIO_LED_RSSILOW 14
-
-/* defaults taken from others machs */
-#define ALL0258N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ALL0258N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0258N_KEYS_POLL_INTERVAL)
-
-/* showed up in the original firmware's bootlog */
-#define ALL0258N_SEC_PHYMASK BIT(3)
-
-static struct gpio_led all0258n_leds_gpio[] __initdata = {
- {
- .name = "all0258n:green:rssihigh",
- .gpio = ALL0258N_GPIO_LED_RSSIHIGH,
- .active_low = 1,
- }, {
- .name = "all0258n:yellow:rssimedium",
- .gpio = ALL0258N_GPIO_LED_RSSIMEDIUM,
- .active_low = 1,
- }, {
- .name = "all0258n:red:rssilow",
- .gpio = ALL0258N_GPIO_LED_RSSILOW,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button all0258n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ALL0258N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ALL0258N_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init all0258n_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f7f0000);
- u8 *ee = (u8 *) KSEG1ADDR(0x1f7f1000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(all0258n_leds_gpio),
- all0258n_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ALL0258N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(all0258n_gpio_keys),
- all0258n_gpio_keys);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
- ath79_eth1_data.phy_mask = ALL0258N_SEC_PHYMASK;
-
- ath79_register_mdio(0, 0x0);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_ALL0258N, "ALL0258N", "Allnet ALL0258N",
- all0258n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-all0315n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-all0315n.c
deleted file mode 100644
index 387ee7f9ea..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-all0315n.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Allnet ALL0315N support
- *
- * Copyright (C) 2012 Daniel Golle <dgolle@allnet.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-m25p80.h"
-#include "dev-leds-gpio.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define ALL0315N_GPIO_BTN_RESET 0
-#define ALL0315N_GPIO_LED_RSSIHIGH 14
-#define ALL0315N_GPIO_LED_RSSIMEDIUM 15
-#define ALL0315N_GPIO_LED_RSSILOW 16
-
-#define ALL0315N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ALL0315N_KEYS_DEBOUNCE_INTERVAL (3 * ALL0315N_KEYS_POLL_INTERVAL)
-
-static struct gpio_led all0315n_leds_gpio[] __initdata = {
- {
- .name = "all0315n:green:rssihigh",
- .gpio = ALL0315N_GPIO_LED_RSSIHIGH,
- .active_low = 1,
- }, {
- .name = "all0315n:yellow:rssimedium",
- .gpio = ALL0315N_GPIO_LED_RSSIMEDIUM,
- .active_low = 1,
- }, {
- .name = "all0315n:red:rssilow",
- .gpio = ALL0315N_GPIO_LED_RSSILOW,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button all0315n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ALL0315N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ALL0315N_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init all0315n_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1ffc0000);
- u8 *ee = (u8 *) KSEG1ADDR(0x1ffc1000);
-
- ath79_register_m25p80(NULL);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(all0315n_leds_gpio),
- all0315n_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ALL0315N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(all0315n_gpio_keys),
- all0315n_gpio_keys);
-
- ap9x_pci_setup_wmac_led_pin(0, 1);
- ap91_pci_init(ee, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_ALL0315N, "ALL0315N", "Allnet ALL0315N",
- all0315n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s1.c
deleted file mode 100644
index 0a81227b51..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s1.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Bitmain Antminer S1 board support
- *
- * Copyright (C) 2015 L. D. Pinney <ldpinney@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "dev-usb.h"
-
-#define ANTMINER_S1_GPIO_BTN_RESET 11
-
-#define ANTMINER_S1_GPIO_LED_SYSTEM 23
-#define ANTMINER_S1_GPIO_LED_WLAN 0
-#define ANTMINER_S1_GPIO_USB_POWER 26
-
-#define ANTMINER_S1_KEYSPOLL_INTERVAL 20 /* msecs */
-#define ANTMINER_S1_KEYSDEBOUNCE_INTERVAL (3 * ANTMINER_S1_KEYSPOLL_INTERVAL)
-
-static const char *ANTMINER_S1_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data ANTMINER_S1_flash_data = {
- .part_probes = ANTMINER_S1_part_probes,
-};
-
-static struct gpio_led ANTMINER_S1_leds_gpio[] __initdata = {
- {
- .name = "antminer-s1:green:system",
- .gpio = ANTMINER_S1_GPIO_LED_SYSTEM,
- .active_low = 0,
- },{
- .name = "antminer-s1:green:wlan",
- .gpio = ANTMINER_S1_GPIO_LED_WLAN,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button ANTMINER_S1_GPIO_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ANTMINER_S1_KEYSDEBOUNCE_INTERVAL,
- .gpio = ANTMINER_S1_GPIO_BTN_RESET,
- .active_low = 0,
- },
-};
-
-static void __init antminer_s1_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ANTMINER_S1_leds_gpio),
- ANTMINER_S1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ANTMINER_S1_KEYSPOLL_INTERVAL,
- ARRAY_SIZE(ANTMINER_S1_GPIO_keys),
- ANTMINER_S1_GPIO_keys);
-
- gpio_request_one(ANTMINER_S1_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_register_m25p80(&ANTMINER_S1_flash_data);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_ANTMINER_S1, "ANTMINER-S1",
- "Antminer-S1", antminer_s1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c
deleted file mode 100644
index b77a6ccc4e..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-antminer-s3.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Bitmain Antminer S3 board support
- *
- * Copyright (C) 2015 L. D. Pinney <ldpinney@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "dev-usb.h"
-
-#define ANTMINER_S3_GPIO_LED_WLAN 0
-#define ANTMINER_S3_GPIO_LED_SYSTEM 17
-#define ANTMINER_S3_GPIO_LED_LAN 22
-#define ANTMINER_S3_GPIO_USB_POWER 26
-
-#define ANTMINER_S3_GPIO_BTN_RESET 11
-
-#define ANTMINER_S3_KEYSPOLL_INTERVAL 88 /* msecs */
-#define ANTMINER_S3_KEYSDEBOUNCE_INTERVAL (3 * ANTMINER_S3_KEYSPOLL_INTERVAL)
-
-static const char *ANTMINER_S3_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data ANTMINER_S3_flash_data = {
- .part_probes = ANTMINER_S3_part_probes,
-};
-
-static struct gpio_led ANTMINER_S3_leds_gpio[] __initdata = {
- {
- .name = "antminer-s3:green:wlan",
- .gpio = ANTMINER_S3_GPIO_LED_WLAN,
- .active_low = 0,
- },{
- .name = "antminer-s3:green:system",
- .gpio = ANTMINER_S3_GPIO_LED_SYSTEM,
- .active_low = 0,
- },{
- .name = "antminer-s3:yellow:lan",
- .gpio = ANTMINER_S3_GPIO_LED_LAN,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button ANTMINER_S3_GPIO_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ANTMINER_S3_KEYSDEBOUNCE_INTERVAL,
- .gpio = ANTMINER_S3_GPIO_BTN_RESET,
- .active_low = 0,
- },
-};
-
-static void __init antminer_s3_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ANTMINER_S3_leds_gpio),
- ANTMINER_S3_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ANTMINER_S3_KEYSPOLL_INTERVAL,
- ARRAY_SIZE(ANTMINER_S3_GPIO_keys),
- ANTMINER_S3_GPIO_keys);
-
- gpio_request_one(ANTMINER_S3_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_register_m25p80(&ANTMINER_S3_flash_data);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_ANTMINER_S3, "ANTMINER-S3",
- "Antminer-S3", antminer_s3_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-antrouter-r1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-antrouter-r1.c
deleted file mode 100644
index a8f7b5d687..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-antrouter-r1.c
+++ /dev/null
@@ -1,98 +0,0 @@
-/*
- * Bitmain Antrouter R1 board support
- *
- * Copyright (C) 2015 L. D. Pinney <ldpinney@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "dev-usb.h"
-
-#define ANTROUTER_R1_GPIO_BTN_RESET 11
-
-#define ANTROUTER_R1_GPIO_LED_WLAN 0
-#define ANTROUTER_R1_GPIO_LED_BTC 22
-#define ANTROUTER_R1_GPIO_USB_POWER 18
-
-#define ANTROUTER_R1_KEYSPOLL_INTERVAL 44 /* msecs */
-#define ANTROUTER_R1_KEYSDEBOUNCE_INTERVAL (4 * ANTROUTER_R1_KEYSPOLL_INTERVAL)
-
-static const char *ANTROUTER_R1_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data ANTROUTER_R1_flash_data = {
- .part_probes = ANTROUTER_R1_part_probes,
-};
-
-static struct gpio_led ANTROUTER_R1_leds_gpio[] __initdata = {
- {
- .name = "antrouter-r1:green:wlan",
- .gpio = ANTROUTER_R1_GPIO_LED_WLAN,
- .active_low = 0,
- },{
- .name = "antrouter-r1:green:system",
- .gpio = ANTROUTER_R1_GPIO_LED_BTC,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button ANTROUTER_R1_GPIO_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ANTROUTER_R1_KEYSDEBOUNCE_INTERVAL,
- .gpio = ANTROUTER_R1_GPIO_BTN_RESET,
- .active_low = 0,
- },
-};
-
-static void __init antrouter_r1_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ANTROUTER_R1_leds_gpio),
- ANTROUTER_R1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ANTROUTER_R1_KEYSPOLL_INTERVAL,
- ARRAY_SIZE(ANTROUTER_R1_GPIO_keys),
- ANTROUTER_R1_GPIO_keys);
-
- gpio_request_one(ANTROUTER_R1_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_register_m25p80(&ANTROUTER_R1_flash_data);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_ANTROUTER_R1, "ANTROUTER-R1",
- "Antrouter-R1", antrouter_r1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap121f.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap121f.c
deleted file mode 100644
index 955b7faf63..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap121f.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * ALFA Network AP121F board support
- *
- * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define AP121F_GPIO_LED_LAN 17
-#define AP121F_GPIO_LED_VPN 27
-#define AP121F_GPIO_LED_WLAN 0
-
-#define AP121F_GPIO_MICROSD_EN 26
-
-#define AP121F_GPIO_BTN_RESET 12
-#define AP121F_GPIO_BTN_SWITCH 21
-
-#define AP121F_KEYS_POLL_INTERVAL 20
-#define AP121F_KEYS_DEBOUNCE_INTERVAL (3 * AP121F_KEYS_POLL_INTERVAL)
-
-#define AP121F_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led ap121f_leds_gpio[] __initdata = {
- {
- .name = "ap121f:green:lan",
- .gpio = AP121F_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "ap121f:green:vpn",
- .gpio = AP121F_GPIO_LED_VPN,
- .active_low = 1,
- }, {
- .name = "ap121f:green:wlan",
- .gpio = AP121F_GPIO_LED_WLAN,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button ap121f_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = AP121F_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP121F_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "switch",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = AP121F_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP121F_GPIO_BTN_SWITCH,
- .active_low = 0,
- },
-};
-
-static void __init ap121f_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1f040000);
-
- ath79_register_m25p80(NULL);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- /* LAN */
- ath79_register_mdio(0, 0x0);
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
- ath79_register_eth(0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121f_leds_gpio),
- ap121f_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, AP121F_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap121f_gpio_keys),
- ap121f_gpio_keys);
-
- gpio_request_one(AP121F_GPIO_MICROSD_EN,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "microSD enable");
-
- ath79_register_wmac(art + AP121F_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_AP121F, "AP121F", "ALFA Network AP121F", ap121f_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap132.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap132.c
deleted file mode 100644
index 2ebac057a7..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap132.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Atheros AP132 reference board support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2013 Embedded Wireless GmbH <info@embeddedwireless.de>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define AP132_GPIO_LED_USB 4
-#define AP132_GPIO_LED_WLAN_5G 12
-#define AP132_GPIO_LED_WLAN_2G 13
-#define AP132_GPIO_LED_STATUS_RED 14
-#define AP132_GPIO_LED_WPS_RED 15
-
-#define AP132_GPIO_BTN_WPS 16
-
-#define AP132_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP132_KEYS_DEBOUNCE_INTERVAL (3 * AP132_KEYS_POLL_INTERVAL)
-
-#define AP132_MAC0_OFFSET 0
-#define AP132_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led ap132_leds_gpio[] __initdata = {
- {
- .name = "ap132:red:status",
- .gpio = AP132_GPIO_LED_STATUS_RED,
- .active_low = 1,
- },
- {
- .name = "ap132:red:wps",
- .gpio = AP132_GPIO_LED_WPS_RED,
- .active_low = 1,
- },
- {
- .name = "ap132:red:wlan-2g",
- .gpio = AP132_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
- .name = "ap132:red:usb",
- .gpio = AP132_GPIO_LED_USB,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ap132_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AP132_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP132_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg ap132_ar8327_pad0_cfg;
-
-static struct ar8327_platform_data ap132_ar8327_data = {
- .pad0_cfg = &ap132_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info ap132_mdio1_info[] = {
- {
- .bus_id = "ag71xx-mdio.1",
- .mdio_addr = 0,
- .platform_data = &ap132_ar8327_data,
- },
-};
-
-static void __init ap132_mdio_setup(void)
-{
- void __iomem *base;
- u32 t;
-
-#define GPIO_IN_ENABLE3_ADDRESS 0x0050
-#define GPIO_IN_ENABLE3_MII_GE1_MDI_MASK 0x00ff0000
-#define GPIO_IN_ENABLE3_MII_GE1_MDI_LSB 16
-#define GPIO_IN_ENABLE3_MII_GE1_MDI_SET(x) (((x) << GPIO_IN_ENABLE3_MII_GE1_MDI_LSB) & GPIO_IN_ENABLE3_MII_GE1_MDI_MASK)
-#define GPIO_OUT_FUNCTION4_ADDRESS 0x003c
-#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK 0xff000000
-#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB 24
-#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(x) (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK)
-#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK 0x0000ff00
-#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB 8
-#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(x) (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK)
-
- base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
-
- t = __raw_readl(base + GPIO_IN_ENABLE3_ADDRESS);
- t &= ~GPIO_IN_ENABLE3_MII_GE1_MDI_MASK;
- t |= GPIO_IN_ENABLE3_MII_GE1_MDI_SET(19);
- __raw_writel(t, base + GPIO_IN_ENABLE3_ADDRESS);
-
-
- __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 19), base + AR71XX_GPIO_REG_OE);
-
- __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 17), base + AR71XX_GPIO_REG_OE);
-
-
- t = __raw_readl(base + GPIO_OUT_FUNCTION4_ADDRESS);
- t &= ~(GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK);
- t |= GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(0x20) | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(0x21);
- __raw_writel(t, base + GPIO_OUT_FUNCTION4_ADDRESS);
-
- iounmap(base);
-
-}
-
-static void __init ap132_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap132_leds_gpio),
- ap132_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP132_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap132_gpio_keys),
- ap132_gpio_keys);
-
- ath79_register_usb();
-
- ath79_register_wmac(art + AP132_WMAC_CALDATA_OFFSET, NULL);
-
- /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
- ap132_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
- ap132_ar8327_pad0_cfg.sgmii_delay_en = true;
-
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- ap132_mdio_setup();
-
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, art + AP132_MAC0_OFFSET, 0);
-
- mdiobus_register_board_info(ap132_mdio1_info,
- ARRAY_SIZE(ap132_mdio1_info));
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_mask = BIT(0);
- ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
-
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP132, "AP132",
- "Atheros AP132 reference board",
- ap132_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap143.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap143.c
deleted file mode 100644
index 098420b92f..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap143.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Atheros AP143 reference board support
- *
- * Copyright (c) 2013-2015 The Linux Foundation. All rights reserved.
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define AP143_GPIO_LED_WLAN 12
-#define AP143_GPIO_LED_WPS 13
-#define AP143_GPIO_LED_STATUS 13
-
-#define AP143_GPIO_LED_WAN 4
-#define AP143_GPIO_LED_LAN1 16
-#define AP143_GPIO_LED_LAN2 15
-#define AP143_GPIO_LED_LAN3 14
-#define AP143_GPIO_LED_LAN4 11
-
-#define AP143_GPIO_BTN_WPS 17
-
-#define AP143_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP143_KEYS_DEBOUNCE_INTERVAL (3 * AP143_KEYS_POLL_INTERVAL)
-
-#define AP143_MAC0_OFFSET 0
-#define AP143_MAC1_OFFSET 6
-#define AP143_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led ap143_leds_gpio[] __initdata = {
- {
- .name = "ap143:green:status",
- .gpio = AP143_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "ap143:green:wlan",
- .gpio = AP143_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ap143_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AP143_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP143_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static void __init ap143_gpio_led_setup(void)
-{
- ath79_gpio_direction_select(AP143_GPIO_LED_WAN, true);
- ath79_gpio_direction_select(AP143_GPIO_LED_LAN1, true);
- ath79_gpio_direction_select(AP143_GPIO_LED_LAN2, true);
- ath79_gpio_direction_select(AP143_GPIO_LED_LAN3, true);
- ath79_gpio_direction_select(AP143_GPIO_LED_LAN4, true);
-
- ath79_gpio_output_select(AP143_GPIO_LED_WAN,
- QCA953X_GPIO_OUT_MUX_LED_LINK5);
- ath79_gpio_output_select(AP143_GPIO_LED_LAN1,
- QCA953X_GPIO_OUT_MUX_LED_LINK1);
- ath79_gpio_output_select(AP143_GPIO_LED_LAN2,
- QCA953X_GPIO_OUT_MUX_LED_LINK2);
- ath79_gpio_output_select(AP143_GPIO_LED_LAN3,
- QCA953X_GPIO_OUT_MUX_LED_LINK3);
- ath79_gpio_output_select(AP143_GPIO_LED_LAN4,
- QCA953X_GPIO_OUT_MUX_LED_LINK4);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap143_leds_gpio),
- ap143_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP143_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap143_gpio_keys),
- ap143_gpio_keys);
-}
-
-static void __init ap143_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ap143_gpio_led_setup();
-
- ath79_register_usb();
-
- ath79_wmac_set_led_pin(AP143_GPIO_LED_WLAN);
- ath79_register_wmac(art + AP143_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + AP143_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art + AP143_MAC1_OFFSET, 0);
-
- /* WAN port */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP143, "AP143", "Qualcomm Atheros AP143 reference board",
- ap143_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap147.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap147.c
deleted file mode 100644
index 7b45da4711..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap147.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Atheros AP147 reference board support
- *
- * Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
- * Copyright (C) 2015 Sven Eckelmann <sven@open-mesh.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define AP147_GPIO_LED_WAN 4
-#define AP147_GPIO_LED_LAN1 16
-#define AP147_GPIO_LED_LAN2 15
-#define AP147_GPIO_LED_LAN3 14
-#define AP147_GPIO_LED_LAN4 11
-#define AP147_GPIO_LED_STATUS 13
-#define AP147_GPIO_LED_WLAN_2G 12
-
-#define AP147_GPIO_BTN_WPS 17
-
-#define AP147_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP147_KEYS_DEBOUNCE_INTERVAL (3 * AP147_KEYS_POLL_INTERVAL)
-
-#define AP147_MAC0_OFFSET 0x1000
-
-static struct gpio_led ap147_leds_gpio[] __initdata = {
- {
- .name = "ap147:green:status",
- .gpio = AP147_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "ap147:green:wlan-2g",
- .gpio = AP147_GPIO_LED_WLAN_2G,
- .active_low = 1,
- }, {
- .name = "ap147:green:lan1",
- .gpio = AP147_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "ap147:green:lan2",
- .gpio = AP147_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "ap147:green:lan3",
- .gpio = AP147_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "ap147:green:lan4",
- .gpio = AP147_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "ap147:green:wan",
- .gpio = AP147_GPIO_LED_WAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button ap147_gpio_keys[] __initdata = {
- {
- .desc = "wps button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AP147_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP147_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init ap147_setup(void)
-{
- u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap147_leds_gpio),
- ap147_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP147_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap147_gpio_keys),
- ap147_gpio_keys);
-
- ath79_register_usb();
-
- ath79_register_pci();
-
- ath79_register_wmac(art + AP147_MAC0_OFFSET, NULL);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_init_mac(ath79_eth1_data.mac_addr, art, 0);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 1);
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP147_010, "AP147-010", "Atheros AP147-010 reference board", ap147_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c
deleted file mode 100644
index 277a934a18..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap152.c
+++ /dev/null
@@ -1,140 +0,0 @@
-
-/*
- * Qualcomm Atheros AP152 reference board support
- *
- * Copyright (c) 2015 Qualcomm Atheros
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-
-#define AP152_GPIO_LED_USB0 7
-#define AP152_GPIO_LED_USB1 8
-
-#define AP152_GPIO_BTN_RESET 2
-#define AP152_GPIO_BTN_WPS 1
-#define AP152_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP152_KEYS_DEBOUNCE_INTERVAL (3 * AP152_KEYS_POLL_INTERVAL)
-
-#define AP152_MAC0_OFFSET 0
-#define AP152_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led ap152_leds_gpio[] __initdata = {
- {
- .name = "ap152:green:usb0",
- .gpio = AP152_GPIO_LED_USB0,
- .active_low = 1,
- },
- {
- .name = "ap152:green:usb1",
- .gpio = AP152_GPIO_LED_USB1,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button ap152_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AP152_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP152_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = AP152_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP152_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg ap152_ar8337_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data ap152_ar8337_data = {
- .pad0_cfg = &ap152_ar8337_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info ap152_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &ap152_ar8337_data,
- },
-};
-
-static void __init ap152_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap152_leds_gpio),
- ap152_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP152_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap152_gpio_keys),
- ap152_gpio_keys);
-
- ath79_register_usb();
-
- platform_device_register(&ath79_mdio0_device);
-
- mdiobus_register_board_info(ap152_mdio0_info,
- ARRAY_SIZE(ap152_mdio0_info));
-
- ath79_register_wmac(art + AP152_WMAC_CALDATA_OFFSET, NULL);
- ath79_register_pci();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + AP152_MAC0_OFFSET, 0);
-
- /* GMAC0 is connected to an AR8337 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP152, "AP152", "Qualcomm Atheros AP152 reference board",
- ap152_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap531b0.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap531b0.c
deleted file mode 100644
index 3cb2697955..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap531b0.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Rockeetech AP531B0 11ng wireless AP board support
- *
- * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2016 Shuanglin Liu <roboidler@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-
-#define AP531B0_GPIO_LED_WLAN 12
-#define AP531B0_GPIO_LED_STATUS 11
-
-#define AP531B0_GPIO_RST_BTN 17
-
-#define AP531B0_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP531B0_KEYS_DEBOUNCE_INTERVAL (3 * AP531B0_KEYS_POLL_INTERVAL)
-
-#define AP531B0_WMAC_CALDATA_OFFSET 0x1000
-
-
-static struct gpio_led ap531b0_leds_gpio[] __initdata = {
- {
- .name = "ap531b0:green:status",
- .gpio = AP531B0_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "ap531b0:green:wlan",
- .gpio = AP531B0_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ap531b0_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = AP531B0_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP531B0_GPIO_RST_BTN,
- .active_low = 1,
- },
-};
-
-
-static void __init ap531b0_gpio_led_setup(void)
-{
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap531b0_leds_gpio),
- ap531b0_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, AP531B0_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap531b0_gpio_keys),
- ap531b0_gpio_keys);
-}
-
-static void __init ap531b0_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *pmac;
-
- ath79_register_m25p80(NULL);
- ap531b0_gpio_led_setup();
- ath79_register_usb();
- ath79_register_pci();
-
- ath79_register_mdio(0, 0x0);
-
- pmac = art + AP531B0_WMAC_CALDATA_OFFSET + 2;
- ath79_init_mac(ath79_eth0_data.mac_addr, pmac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, pmac, 2);
-
- ath79_register_wmac(art + AP531B0_WMAC_CALDATA_OFFSET, pmac);
-
- /* WAN port */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP531B0, "AP531B0", "Rockeetech AP531B0",
- ap531b0_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c
deleted file mode 100644
index 99fceca3a0..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap90q.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Support for YunCore boards:
- * - AP80Q/AP90Q
- * - CPE830
- *
- * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-/* AP90Q */
-#define AP90Q_GPIO_LED_WAN 4
-#define AP90Q_GPIO_LED_WLAN 12
-#define AP90Q_GPIO_LED_LAN 16
-
-#define AP90Q_GPIO_BTN_RESET 17
-
-#define AP90Q_KEYS_POLL_INTERVAL 20
-#define AP90Q_KEYS_DEBOUNCE_INTERVAL (3 * AP90Q_KEYS_POLL_INTERVAL)
-
-static struct gpio_led ap90q_leds_gpio[] __initdata = {
- {
- .name = "ap90q:green:lan",
- .gpio = AP90Q_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "ap90q:green:wan",
- .gpio = AP90Q_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "ap90q:green:wlan",
- .gpio = AP90Q_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button ap90q_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = AP90Q_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP90Q_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-/* CPE830 */
-#define CPE830_GPIO_LED_LINK4 0
-#define CPE830_GPIO_LED_LINK1 1
-#define CPE830_GPIO_LED_LINK2 2
-#define CPE830_GPIO_LED_LINK3 3
-#define CPE830_GPIO_LED_WAN 4
-#define CPE830_GPIO_LED_WLAN 12
-#define CPE830_GPIO_LED_LAN 16
-
-#define CPE830_GPIO_BTN_RESET 17
-
-static struct gpio_led cpe830_leds_gpio[] __initdata = {
- {
- .name = "cpe830:green:lan",
- .gpio = CPE830_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "cpe830:green:wan",
- .gpio = CPE830_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "cpe830:green:wlan",
- .gpio = CPE830_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "cpe830:green:link1",
- .gpio = CPE830_GPIO_LED_LINK1,
- .active_low = 1,
- },
- {
- .name = "cpe830:green:link2",
- .gpio = CPE830_GPIO_LED_LINK2,
- .active_low = 1,
- },
- {
- .name = "cpe830:green:link3",
- .gpio = CPE830_GPIO_LED_LINK3,
- .active_low = 1,
- },
- {
- .name = "cpe830:green:link4",
- .gpio = CPE830_GPIO_LED_LINK4,
- .active_low = 1,
- },
-};
-
-static void __init ap90q_cpe830_common_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask |= BIT(4);
-
- /* LAN */
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-
- ath79_register_wmac(art, NULL);
-
- /* For LED on GPIO4 */
- ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
-
- ath79_gpio_direction_select(AP90Q_GPIO_LED_LAN, true);
- ath79_gpio_direction_select(AP90Q_GPIO_LED_WAN, true);
- ath79_gpio_direction_select(AP90Q_GPIO_LED_WLAN, true);
-
- /* Mute LEDs on boot */
- gpio_set_value(AP90Q_GPIO_LED_LAN, 1);
- gpio_set_value(AP90Q_GPIO_LED_WAN, 1);
-
- ath79_gpio_output_select(AP90Q_GPIO_LED_LAN, 0);
- ath79_gpio_output_select(AP90Q_GPIO_LED_WAN, 0);
- ath79_gpio_output_select(AP90Q_GPIO_LED_WLAN, 0);
-
- ath79_register_gpio_keys_polled(-1, AP90Q_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap90q_gpio_keys),
- ap90q_gpio_keys);
-}
-
-static void __init ap90q_setup(void)
-{
- ap90q_cpe830_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap90q_leds_gpio),
- ap90q_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP90Q, "AP90Q", "YunCore AP80Q/AP90Q", ap90q_setup);
-
-static void __init cpe830_setup(void)
-{
- ap90q_cpe830_common_setup();
-
- ath79_gpio_direction_select(CPE830_GPIO_LED_LINK1, true);
- ath79_gpio_direction_select(CPE830_GPIO_LED_LINK2, true);
- ath79_gpio_direction_select(CPE830_GPIO_LED_LINK3, true);
- ath79_gpio_direction_select(CPE830_GPIO_LED_LINK4, true);
-
- /* Mute LEDs on boot */
- gpio_set_value(CPE830_GPIO_LED_LINK1, 1);
- gpio_set_value(CPE830_GPIO_LED_LINK2, 1);
- gpio_set_value(CPE830_GPIO_LED_LINK3, 1);
- gpio_set_value(CPE830_GPIO_LED_LINK4, 1);
-
- ath79_gpio_output_select(CPE830_GPIO_LED_LINK1, 0);
- ath79_gpio_output_select(CPE830_GPIO_LED_LINK2, 0);
- ath79_gpio_output_select(CPE830_GPIO_LED_LINK3, 0);
- ath79_gpio_output_select(CPE830_GPIO_LED_LINK4, 0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe830_leds_gpio),
- cpe830_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_CPE830, "CPE830", "YunCore CPE830", cpe830_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap91-5g.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap91-5g.c
deleted file mode 100644
index 64b9430381..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap91-5g.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * ALFA Network AP91-5G board support
- *
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define AP91_5G_GPIO_LED_LAN 17
-#define AP91_5G_GPIO_LED_SIGNAL1 12
-#define AP91_5G_GPIO_LED_SIGNAL2 8
-#define AP91_5G_GPIO_LED_SIGNAL3 6
-#define AP91_5G_GPIO_LED_SIGNAL4 7
-
-#define AP91_5G_GPIO_WDT_EN 1
-#define AP91_5G_GPIO_WDT_IN 0
-
-#define AP91_5G_GPIO_BTN_RESET 11
-
-#define AP91_5G_KEYS_POLL_INTERVAL 20
-#define AP91_5G_KEYS_DEBOUNCE_INTERVAL (3 * AP91_5G_KEYS_POLL_INTERVAL)
-
-#define AP91_5G_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led ap91_5g_leds_gpio[] __initdata = {
- {
- .name = "ap91-5g:green:lan",
- .gpio = AP91_5G_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "ap91-5g:red:signal1",
- .gpio = AP91_5G_GPIO_LED_SIGNAL1,
- .active_low = 1,
- }, {
- .name = "ap91-5g:orange:signal2",
- .gpio = AP91_5G_GPIO_LED_SIGNAL2,
- .active_low = 1,
- }, {
- .name = "ap91-5g:green:signal3",
- .gpio = AP91_5G_GPIO_LED_SIGNAL3,
- .active_low = 1,
- }, {
- .name = "ap91-5g:green:signal4",
- .gpio = AP91_5G_GPIO_LED_SIGNAL4,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button ap91_5g_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = AP91_5G_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP91_5G_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init ap91_5g_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- gpio_set_value(AP91_5G_GPIO_LED_LAN, 1);
- gpio_set_value(AP91_5G_GPIO_LED_SIGNAL3, 1);
- gpio_set_value(AP91_5G_GPIO_LED_SIGNAL4, 1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
- ath79_register_eth(0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap91_5g_leds_gpio),
- ap91_5g_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, AP91_5G_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap91_5g_gpio_keys),
- ap91_5g_gpio_keys);
-
- gpio_request_one(AP91_5G_GPIO_WDT_IN,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "WDT input");
-
- gpio_request_one(AP91_5G_GPIO_WDT_EN,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "WDT enable");
-
- ap91_pci_init(art + AP91_5G_WMAC_CALDATA_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP91_5G, "AP91-5G", "ALFA Network AP91-5G",
- ap91_5g_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap96.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ap96.c
deleted file mode 100644
index 35120d3e2e..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ap96.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * Atheros AP96 board support
- *
- * Copyright (C) 2009 Marco Porsch
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2010 Atheros Communications
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define AP96_GPIO_LED_12_GREEN 0
-#define AP96_GPIO_LED_3_GREEN 1
-#define AP96_GPIO_LED_2_GREEN 2
-#define AP96_GPIO_LED_WPS_GREEN 4
-#define AP96_GPIO_LED_5_GREEN 5
-#define AP96_GPIO_LED_4_ORANGE 6
-
-/* Reset button - next to the power connector */
-#define AP96_GPIO_BTN_RESET 3
-/* WPS button - next to a led on right */
-#define AP96_GPIO_BTN_WPS 8
-
-#define AP96_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AP96_KEYS_DEBOUNCE_INTERVAL (3 * AP96_KEYS_POLL_INTERVAL)
-
-#define AP96_WMAC0_MAC_OFFSET 0x120c
-#define AP96_WMAC1_MAC_OFFSET 0x520c
-#define AP96_CALDATA0_OFFSET 0x1000
-#define AP96_CALDATA1_OFFSET 0x5000
-
-/*
- * AP96 has 12 unlabeled leds in the front; these are numbered from 1 to 12
- * below (from left to right on the board). Led 1 seems to be on whenever the
- * board is powered. Led 11 shows LAN link activity actity. Led 3 is orange;
- * others are green.
- *
- * In addition, there is one led next to a button on the right side for WPS.
- */
-static struct gpio_led ap96_leds_gpio[] __initdata = {
- {
- .name = "ap96:green:led2",
- .gpio = AP96_GPIO_LED_2_GREEN,
- .active_low = 1,
- }, {
- .name = "ap96:green:led3",
- .gpio = AP96_GPIO_LED_3_GREEN,
- .active_low = 1,
- }, {
- .name = "ap96:orange:led4",
- .gpio = AP96_GPIO_LED_4_ORANGE,
- .active_low = 1,
- }, {
- .name = "ap96:green:led5",
- .gpio = AP96_GPIO_LED_5_GREEN,
- .active_low = 1,
- }, {
- .name = "ap96:green:led12",
- .gpio = AP96_GPIO_LED_12_GREEN,
- .active_low = 1,
- }, { /* next to a button on right */
- .name = "ap96:green:wps",
- .gpio = AP96_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ap96_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP96_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AP96_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AP96_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-#define AP96_WAN_PHYMASK 0x10
-#define AP96_LAN_PHYMASK 0x0f
-
-static void __init ap96_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_mdio(0, ~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = AP96_LAN_PHYMASK;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, art, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = AP96_WAN_PHYMASK;
-
- ath79_eth1_pll_data.pll_1000 = 0x1f000000;
-
- ath79_register_eth(1);
-
- ath79_register_usb();
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap96_leds_gpio),
- ap96_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, AP96_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap96_gpio_keys),
- ap96_gpio_keys);
-
- ap94_pci_init(art + AP96_CALDATA0_OFFSET,
- art + AP96_WMAC0_MAC_OFFSET,
- art + AP96_CALDATA1_OFFSET,
- art + AP96_WMAC1_MAC_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_AP96, "AP96", "Atheros AP96", ap96_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
deleted file mode 100644
index c6c6463224..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c25-v1.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * TP-Link Archer C25 v1 board support
- *
- * Copyright (C) 2017 Ludwig Thomeczek <ledesrc@wxorx.net>
- * based on mach-archer-c60/C59-v1.c
- * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <linux/gpio.h>
-
-#include "common.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/74x164.h>
-
-#define ARCHER_C25_GPIO_SHIFT_OE 21 /* OE, Output Enable */
-#define ARCHER_C25_GPIO_SHIFT_SER 14 /* DS, Data Serial Input */
-#define ARCHER_C25_GPIO_SHIFT_SRCLK 15 /* SHCP, Shift Reg Clock Input */
-#define ARCHER_C25_GPIO_SHIFT_SRCLR 19 /* MR, Master Reset */
-#define ARCHER_C25_GPIO_SHIFT_RCLK 16 /* STCP, Storage Reg Clock Input */
-
-#define ARCHER_C25_74HC_GPIO_BASE 32
-#define ARCHER_C25_74HC_GPIO_LED_WAN_AMBER (ARCHER_C25_74HC_GPIO_BASE + 4)
-#define ARCHER_C25_74HC_GPIO_LED_WAN_GREEN (ARCHER_C25_74HC_GPIO_BASE + 5)
-#define ARCHER_C25_74HC_GPIO_LED_WLAN2 (ARCHER_C25_74HC_GPIO_BASE + 6)
-#define ARCHER_C25_74HC_GPIO_LED_WLAN5 (ARCHER_C25_74HC_GPIO_BASE + 7)
-#define ARCHER_C25_74HC_GPIO_LED_LAN1 (ARCHER_C25_74HC_GPIO_BASE + 0)
-#define ARCHER_C25_74HC_GPIO_LED_LAN2 (ARCHER_C25_74HC_GPIO_BASE + 1)
-#define ARCHER_C25_74HC_GPIO_LED_LAN3 (ARCHER_C25_74HC_GPIO_BASE + 2)
-#define ARCHER_C25_74HC_GPIO_LED_LAN4 (ARCHER_C25_74HC_GPIO_BASE + 3)
-
-#define ARCHER_C25_V1_SSR_BIT_0 0
-#define ARCHER_C25_V1_SSR_BIT_1 1
-#define ARCHER_C25_V1_SSR_BIT_2 2
-#define ARCHER_C25_V1_SSR_BIT_3 3
-#define ARCHER_C25_V1_SSR_BIT_4 4
-#define ARCHER_C25_V1_SSR_BIT_5 5
-#define ARCHER_C25_V1_SSR_BIT_6 6
-#define ARCHER_C25_V1_SSR_BIT_7 7
-
-
-#define ARCHER_C25_V1_KEYS_POLL_INTERVAL 20
-#define ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL \
- (3 * ARCHER_C25_V1_KEYS_POLL_INTERVAL)
-
-#define ARCHER_C25_V1_GPIO_BTN_RESET 1
-#define ARCHER_C25_V1_GPIO_BTN_RFKILL 22
-
-#define ARCHER_C25_V1_GPIO_LED_POWER 17
-#define ARCHER_C25_V1_GPIO_LED_WPS 2
-
-#define ARCHER_C25_V1_WMAC_CALDATA_OFFSET 0x1000
-
-static struct spi_gpio_platform_data archer_c25_v1_spi_data = {
- .sck = ARCHER_C25_GPIO_SHIFT_SRCLK,
- .miso = SPI_GPIO_NO_MISO,
- .mosi = ARCHER_C25_GPIO_SHIFT_SER,
- .num_chipselect = 1,
-};
-
-static u8 archer_c25_v1_ssr_initdata[] = {
- BIT(ARCHER_C25_V1_SSR_BIT_7) |
- BIT(ARCHER_C25_V1_SSR_BIT_6) |
- BIT(ARCHER_C25_V1_SSR_BIT_5) |
- BIT(ARCHER_C25_V1_SSR_BIT_4) |
- BIT(ARCHER_C25_V1_SSR_BIT_3) |
- BIT(ARCHER_C25_V1_SSR_BIT_2) |
- BIT(ARCHER_C25_V1_SSR_BIT_1)
-};
-
-static struct gen_74x164_chip_platform_data archer_c25_v1_ssr_data = {
- .base = ARCHER_C25_74HC_GPIO_BASE,
- .num_registers = ARRAY_SIZE(archer_c25_v1_ssr_initdata),
- .init_data = archer_c25_v1_ssr_initdata,
-};
-
-static struct platform_device archer_c25_v1_spi_device = {
- .name = "spi_gpio",
- .id = 1,
- .dev = {
- .platform_data = &archer_c25_v1_spi_data,
- },
-};
-
-static struct spi_board_info archer_c25_v1_spi_info[] = {
- {
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 10000000,
- .modalias = "74x164",
- .platform_data = &archer_c25_v1_ssr_data,
- .controller_data = (void *) ARCHER_C25_GPIO_SHIFT_RCLK,
- },
-};
-
-static struct gpio_led archer_c25_v1_leds_gpio[] __initdata = {
- {
- .name = "archer-c25-v1:green:power",
- .gpio = ARCHER_C25_V1_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "archer-c25-v1:green:wps",
- .gpio = ARCHER_C25_V1_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "archer-c25-v1:green:wlan2g",
- .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN2,
- .active_low = 1,
- }, {
- .name = "archer-c25-v1:green:wlan5g",
- .gpio = ARCHER_C25_74HC_GPIO_LED_WLAN5,
- .active_low = 1,
- }, {
- .name = "archer-c25-v1:green:lan1",
- .gpio = ARCHER_C25_74HC_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "archer-c25-v1:green:lan2",
- .gpio = ARCHER_C25_74HC_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "archer-c25-v1:green:lan3",
- .gpio = ARCHER_C25_74HC_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "archer-c25-v1:green:lan4",
- .gpio = ARCHER_C25_74HC_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "archer-c25-v1:green:wan",
- .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "archer-c25-v1:amber:wan",
- .gpio = ARCHER_C25_74HC_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button archer_c25_v1_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C25_V1_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = ARCHER_C25_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C25_V1_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
-};
-
-static void __init archer_c25_v1_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0008);
- u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
-
- ath79_register_m25p80(NULL);
-
- spi_register_board_info(archer_c25_v1_spi_info,
- ARRAY_SIZE(archer_c25_v1_spi_info));
-
- platform_device_register(&archer_c25_v1_spi_device);
-
- gpio_request_one(ARCHER_C25_GPIO_SHIFT_OE,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "LED control");
-
- gpio_request_one(ARCHER_C25_GPIO_SHIFT_SRCLR,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "LED reset");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c25_v1_leds_gpio),
- archer_c25_v1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ARCHER_C25_V1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(archer_c25_v1_gpio_keys),
- archer_c25_v1_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
- /* WAN port */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-
- ath79_register_wmac(art + ARCHER_C25_V1_WMAC_CALDATA_OFFSET, mac);
- ap91_pci_init(NULL, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_ARCHER_C25_V1, "ARCHER-C25-V1", "TP-LINK Archer C25 v1",
- archer_c25_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
deleted file mode 100644
index 6cc40e6a7b..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c59-v1.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * TP-Link Archer C58/C59 v1 board support
- *
- * Copyright (C) 2017 Henryk Heisig <hyniu@o2.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/74x164.h>
-
-#include "common.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-
-#define ARCHER_C59_V1_KEYS_POLL_INTERVAL 20
-#define ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C59_V1_KEYS_POLL_INTERVAL)
-
-#define ARCHER_C59_V1_GPIO_BTN_RESET 21
-#define ARCHER_C59_V1_GPIO_BTN_RFKILL 2
-#define ARCHER_C59_V1_GPIO_BTN_WPS 1
-
-#define ARCHER_C59_V1_GPIO_USB_POWER 22
-
-#define ARCHER_C59_GPIO_SHIFT_OE 16
-#define ARCHER_C59_GPIO_SHIFT_SER 17
-#define ARCHER_C59_GPIO_SHIFT_SRCLK 18
-#define ARCHER_C59_GPIO_SHIFT_SRCLR 19
-#define ARCHER_C59_GPIO_SHIFT_RCLK 20
-
-#define ARCHER_C59_74HC_GPIO_BASE 32
-#define ARCHER_C59_74HC_GPIO_LED_POWER (ARCHER_C59_74HC_GPIO_BASE + 0)
-#define ARCHER_C59_74HC_GPIO_LED_WLAN2 (ARCHER_C59_74HC_GPIO_BASE + 1)
-#define ARCHER_C59_74HC_GPIO_LED_WLAN5 (ARCHER_C59_74HC_GPIO_BASE + 2)
-#define ARCHER_C59_74HC_GPIO_LED_LAN (ARCHER_C59_74HC_GPIO_BASE + 3)
-#define ARCHER_C59_74HC_GPIO_LED_WAN_GREEN (ARCHER_C59_74HC_GPIO_BASE + 4)
-#define ARCHER_C59_74HC_GPIO_LED_WAN_AMBER (ARCHER_C59_74HC_GPIO_BASE + 5)
-#define ARCHER_C59_74HC_GPIO_LED_WPS (ARCHER_C59_74HC_GPIO_BASE + 6)
-#define ARCHER_C59_74HC_GPIO_LED_USB (ARCHER_C59_74HC_GPIO_BASE + 7)
-
-#define ARCHER_C59_V1_SSR_BIT_0 0
-#define ARCHER_C59_V1_SSR_BIT_1 1
-#define ARCHER_C59_V1_SSR_BIT_2 2
-#define ARCHER_C59_V1_SSR_BIT_3 3
-#define ARCHER_C59_V1_SSR_BIT_4 4
-#define ARCHER_C59_V1_SSR_BIT_5 5
-#define ARCHER_C59_V1_SSR_BIT_6 6
-#define ARCHER_C59_V1_SSR_BIT_7 7
-
-#define ARCHER_C59_V1_WMAC_CALDATA_OFFSET 0x1000
-#define ARCHER_C59_V1_PCI_CALDATA_OFFSET 0x5000
-
-static struct gpio_led archer_c58_v1_leds_gpio[] __initdata = {
- {
- .name = "archer-c58-v1:green:power",
- .gpio = ARCHER_C59_74HC_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "archer-c58-v1:green:wlan2g",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2,
- .active_low = 1,
- },
- {
- .name = "archer-c58-v1:green:wlan5g",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5,
- .active_low = 1,
- },
- {
- .name = "archer-c58-v1:green:lan",
- .gpio = ARCHER_C59_74HC_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "archer-c58-v1:green:wan",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "archer-c58-v1:amber:wan",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- },
- {
- .name = "archer-c58-v1:green:wps",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_led archer_c59_v1_leds_gpio[] __initdata = {
- {
- .name = "archer-c59-v1:green:power",
- .gpio = ARCHER_C59_74HC_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v1:green:wlan2g",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v1:green:wlan5g",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v1:green:lan",
- .gpio = ARCHER_C59_74HC_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v1:green:wan",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v1:amber:wan",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v1:green:wps",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WPS,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v1:green:usb",
- .gpio = ARCHER_C59_74HC_GPIO_LED_USB,
- .active_low = 1,
- },
-};
-
-static struct gpio_led archer_c59_v2_leds_gpio[] __initdata = {
- {
- .name = "archer-c59-v2:green:power",
- .gpio = ARCHER_C59_74HC_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v2:green:wlan2g",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN2,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v2:green:wlan5g",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WLAN5,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v2:green:lan",
- .gpio = ARCHER_C59_74HC_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v2:green:wan",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v2:amber:wan",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v2:green:wps",
- .gpio = ARCHER_C59_74HC_GPIO_LED_WPS,
- .active_low = 1,
- },
- {
- .name = "archer-c59-v2:green:usb",
- .gpio = ARCHER_C59_74HC_GPIO_LED_USB,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button archer_c59_v1_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C59_V1_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C59_V1_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = ARCHER_C59_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C59_V1_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static struct spi_gpio_platform_data archer_c59_v1_spi_data = {
- .sck = ARCHER_C59_GPIO_SHIFT_SRCLK,
- .miso = SPI_GPIO_NO_MISO,
- .mosi = ARCHER_C59_GPIO_SHIFT_SER,
- .num_chipselect = 1,
-};
-
-static u8 archer_c59_v1_ssr_initdata[] = {
- BIT(ARCHER_C59_V1_SSR_BIT_7) |
- BIT(ARCHER_C59_V1_SSR_BIT_6) |
- BIT(ARCHER_C59_V1_SSR_BIT_5) |
- BIT(ARCHER_C59_V1_SSR_BIT_4) |
- BIT(ARCHER_C59_V1_SSR_BIT_3) |
- BIT(ARCHER_C59_V1_SSR_BIT_2) |
- BIT(ARCHER_C59_V1_SSR_BIT_1)
-};
-
-static struct gen_74x164_chip_platform_data archer_c59_v1_ssr_data = {
- .base = ARCHER_C59_74HC_GPIO_BASE,
- .num_registers = ARRAY_SIZE(archer_c59_v1_ssr_initdata),
- .init_data = archer_c59_v1_ssr_initdata,
-};
-
-static struct platform_device archer_c59_v1_spi_device = {
- .name = "spi_gpio",
- .id = 1,
- .dev = {
- .platform_data = &archer_c59_v1_spi_data,
- },
-};
-
-static struct spi_board_info archer_c59_v1_spi_info[] = {
- {
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 10000000,
- .modalias = "74x164",
- .platform_data = &archer_c59_v1_ssr_data,
- .controller_data = (void *) ARCHER_C59_GPIO_SHIFT_RCLK,
- },
-};
-
-static void __init archer_c5x_v1_setup(u32 macLocation)
-{
- u8 *mac = (u8 *) KSEG1ADDR(macLocation);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
- spi_register_board_info(archer_c59_v1_spi_info,
- ARRAY_SIZE(archer_c59_v1_spi_info));
- platform_device_register(&archer_c59_v1_spi_device);
-
- ath79_register_gpio_keys_polled(-1, ARCHER_C59_V1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(archer_c59_v1_gpio_keys),
- archer_c59_v1_gpio_keys);
-
- ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
- QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
- /* WAN port */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_register_eth(0);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(0);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-
- ath79_register_wmac(art + ARCHER_C59_V1_WMAC_CALDATA_OFFSET, mac);
- ap91_pci_init(art + ARCHER_C59_V1_PCI_CALDATA_OFFSET, NULL);
-
- ath79_register_usb();
- gpio_request_one(ARCHER_C59_V1_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- gpio_request_one(ARCHER_C59_GPIO_SHIFT_OE,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "LED control");
- gpio_request_one(ARCHER_C59_GPIO_SHIFT_SRCLR,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "LED reset");
-}
-
-static void __init archer_c58_v1_setup(void)
-{
- archer_c5x_v1_setup(0x1f010008);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c58_v1_leds_gpio),
- archer_c58_v1_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_ARCHER_C58_V1, "ARCHER-C58-V1",
- "TP-LINK Archer C58 v1", archer_c58_v1_setup);
-
-static void __init archer_c59_v1_setup(void)
-{
- archer_c5x_v1_setup(0x1f010008);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v1_leds_gpio),
- archer_c59_v1_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V1, "ARCHER-C59-V1",
- "TP-LINK Archer C59 v1", archer_c59_v1_setup);
-
-static void __init archer_c59_v2_setup(void)
-{
- archer_c5x_v1_setup(0x1f030008);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c59_v2_leds_gpio),
- archer_c59_v2_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_ARCHER_C59_V2, "ARCHER-C59-V2",
- "TP-LINK Archer C59 v2", archer_c59_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
deleted file mode 100644
index a0839e6bca..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * TP-Link Archer C60 v1 board support
- *
- * Copyright (C) 2017 Henryk Heisig <hyniu@o2.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <linux/gpio.h>
-
-#include "common.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-
-#define ARCHER_C60_V1_GPIO_LED_LAN 2
-#define ARCHER_C60_V1_GPIO_LED_POWER 16
-#define ARCHER_C60_V1_GPIO_LED_WLAN2 17
-#define ARCHER_C60_V1_GPIO_LED_WLAN5 18
-#define ARCHER_C60_V1_GPIO_LED_WPS 19
-#define ARCHER_C60_V1_GPIO_LED_WAN_GREEN 20
-#define ARCHER_C60_V1_GPIO_LED_WAN_AMBER 22
-
-
-#define ARCHER_C60_V1_KEYS_POLL_INTERVAL 20
-#define ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C60_V1_KEYS_POLL_INTERVAL)
-
-#define ARCHER_C60_V1_GPIO_BTN_RESET 21
-#define ARCHER_C60_V1_GPIO_BTN_RFKILL 1
-
-
-
-#define ARCHER_C60_V1_WMAC_CALDATA_OFFSET 0x1000
-#define ARCHER_C60_V1_PCI_CALDATA_OFFSET 0x5000
-
-static struct gpio_led archer_c60_v1_leds_gpio[] __initdata = {
- {
- .name = "archer-c60-v1:green:power",
- .gpio = ARCHER_C60_V1_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v1:green:wlan2g",
- .gpio = ARCHER_C60_V1_GPIO_LED_WLAN2,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v1:green:wlan5g",
- .gpio = ARCHER_C60_V1_GPIO_LED_WLAN5,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v1:green:lan",
- .gpio = ARCHER_C60_V1_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v1:green:wan",
- .gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v1:amber:wan",
- .gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v1:green:wps",
- .gpio = ARCHER_C60_V1_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_led archer_c60_v2_leds_gpio[] __initdata = {
- {
- .name = "archer-c60-v2:green:power",
- .gpio = ARCHER_C60_V1_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v2:green:wlan2g",
- .gpio = ARCHER_C60_V1_GPIO_LED_WLAN2,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v2:green:wlan5g",
- .gpio = ARCHER_C60_V1_GPIO_LED_WLAN5,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v2:green:lan",
- .gpio = ARCHER_C60_V1_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v2:green:wan",
- .gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v2:amber:wan",
- .gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- },
- {
- .name = "archer-c60-v2:green:wps",
- .gpio = ARCHER_C60_V1_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button archer_c60_v1_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C60_V1_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = ARCHER_C60_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C60_V1_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
-};
-
-static void __init archer_c60_v1_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f010008);
- u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v1_leds_gpio),
- archer_c60_v1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(archer_c60_v1_gpio_keys),
- archer_c60_v1_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-
- /* WAN port */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-
- ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);
- ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V1, "ARCHER-C60-V1",
- "TP-LINK Archer C60 v1", archer_c60_v1_setup);
-
-static void __init archer_c60_v2_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fb08);
- u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v2_leds_gpio),
- archer_c60_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(archer_c60_v1_gpio_keys),
- archer_c60_v1_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-
- /* WAN port */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-
- ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);
- ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V2, "ARCHER-C60-V2",
- "TP-LINK Archer C60 v2", archer_c60_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c
deleted file mode 100644
index ee9ce49bcf..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v4.c
+++ /dev/null
@@ -1,260 +0,0 @@
-
-/*
- * Atheros ARCHER_C7 reference board support
- *
- * Copyright (c) 2017 Felix Fietkau <nbd@nbd.name>
- * Copyright (c) 2014 The Linux Foundation. All rights reserved.
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <linux/proc_fs.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/74x164.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-
-
-#define ARCHER_C7_GPIO_SHIFT_OE 1
-#define ARCHER_C7_GPIO_SHIFT_SER 14
-#define ARCHER_C7_GPIO_SHIFT_SRCLK 15
-#define ARCHER_C7_GPIO_SHIFT_RCLK 16
-#define ARCHER_C7_GPIO_SHIFT_SRCLR 21
-
-#define ARCHER_C7_GPIO_BTN_RESET 5
-#define ARCHER_C7_GPIO_BTN_WPS_WIFI 2
-
-#define ARCHER_C7_GPIO_LED_WLAN5 9
-#define ARCHER_C7_GPIO_LED_POWER 6
-#define ARCHER_C7_GPIO_LED_USB1 7
-#define ARCHER_C7_GPIO_LED_USB2 8
-
-#define ARCHER_C7_74HC_GPIO_BASE 32
-#define ARCHER_C7_GPIO_LED_WPS (ARCHER_C7_74HC_GPIO_BASE + 0)
-#define ARCHER_C7_GPIO_LED_LAN1 (ARCHER_C7_74HC_GPIO_BASE + 1)
-#define ARCHER_C7_GPIO_LED_LAN2 (ARCHER_C7_74HC_GPIO_BASE + 2)
-#define ARCHER_C7_GPIO_LED_LAN3 (ARCHER_C7_74HC_GPIO_BASE + 3)
-#define ARCHER_C7_GPIO_LED_LAN4 (ARCHER_C7_74HC_GPIO_BASE + 4)
-#define ARCHER_C7_GPIO_LED_WAN_GREEN (ARCHER_C7_74HC_GPIO_BASE + 5)
-#define ARCHER_C7_GPIO_LED_WAN_AMBER (ARCHER_C7_74HC_GPIO_BASE + 6)
-#define ARCHER_C7_GPIO_LED_WLAN2 (ARCHER_C7_74HC_GPIO_BASE + 7)
-
-#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL)
-
-#define ARCHER_C7_MAC0_OFFSET 0
-#define ARCHER_C7_MAC1_OFFSET 6
-#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000
-
-#define ARCHER_C7_GPIO_MDC 3
-#define ARCHER_C7_GPIO_MDIO 4
-
-static struct spi_gpio_platform_data archer_c7_v4_spi_data = {
- .sck = ARCHER_C7_GPIO_SHIFT_SRCLK,
- .miso = SPI_GPIO_NO_MISO,
- .mosi = ARCHER_C7_GPIO_SHIFT_SER,
- .num_chipselect = 1,
-};
-
-static u8 archer_c7_v4_ssr_initdata = 0xff;
-
-static struct gen_74x164_chip_platform_data archer_c7_v4_ssr_data = {
- .base = ARCHER_C7_74HC_GPIO_BASE,
- .num_registers = 1,
- .init_data = &archer_c7_v4_ssr_initdata,
-};
-
-static struct platform_device archer_c7_v4_spi_device = {
- .name = "spi_gpio",
- .id = 1,
- .dev = {
- .platform_data = &archer_c7_v4_spi_data,
- },
-};
-
-static struct spi_board_info archer_c7_v4_spi_info[] = {
- {
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 10000000,
- .modalias = "74x164",
- .platform_data = &archer_c7_v4_ssr_data,
- .controller_data = (void *) ARCHER_C7_GPIO_SHIFT_RCLK,
- },
-};
-
-static struct gpio_led archer_c7_v4_leds_gpio[] __initdata = {
- {
- .name = "archer-c7-v4:green:power",
- .gpio = ARCHER_C7_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "archer-c7-v4:green:wps",
- .gpio = ARCHER_C7_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "archer-c7-v4:green:wlan2g",
- .gpio = ARCHER_C7_GPIO_LED_WLAN2,
- .active_low = 1,
- }, {
- .name = "archer-c7-v4:green:wlan5g",
- .gpio = ARCHER_C7_GPIO_LED_WLAN5,
- .active_low = 1,
- }, {
- .name = "archer-c7-v4:green:lan1",
- .gpio = ARCHER_C7_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "archer-c7-v4:green:lan2",
- .gpio = ARCHER_C7_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "archer-c7-v4:green:lan3",
- .gpio = ARCHER_C7_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "archer-c7-v4:green:lan4",
- .gpio = ARCHER_C7_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "archer-c7-v4:green:wan",
- .gpio = ARCHER_C7_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "archer-c7-v4:amber:wan",
- .gpio = ARCHER_C7_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- }, {
- .name = "archer-c7-v4:green:usb1",
- .gpio = ARCHER_C7_GPIO_LED_USB1,
- .active_low = 1,
- }, {
- .name = "archer-c7-v4:green:usb2",
- .gpio = ARCHER_C7_GPIO_LED_USB2,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button archer_c7_v4_gpio_keys[] __initdata = {
- {
- .desc = "WPS and WIFI button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C7_GPIO_BTN_WPS_WIFI,
- .active_low = 1,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C7_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg archer_c7_v4_ar8337_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data archer_c7_v4_ar8337_data = {
- .pad0_cfg = &archer_c7_v4_ar8337_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info archer_c7_v4_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &archer_c7_v4_ar8337_data,
- },
-};
-
-
-static void __init archer_c7_v4_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1ff00008);
-
- ath79_register_m25p80(NULL);
-
- spi_register_board_info(archer_c7_v4_spi_info,
- ARRAY_SIZE(archer_c7_v4_spi_info));
-
- platform_device_register(&archer_c7_v4_spi_device);
-
- gpio_request_one(ARCHER_C7_GPIO_SHIFT_OE,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "LED control");
-
- gpio_request_one(ARCHER_C7_GPIO_SHIFT_SRCLR,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "LED reset");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_v4_leds_gpio),
- archer_c7_v4_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(archer_c7_v4_gpio_keys),
- archer_c7_v4_gpio_keys);
-
- ath79_register_usb();
-
- ath79_gpio_output_select(ARCHER_C7_GPIO_MDC, QCA956X_GPIO_OUT_MUX_GE0_MDC);
- ath79_gpio_output_select(ARCHER_C7_GPIO_MDIO, QCA956X_GPIO_OUT_MUX_GE0_MDO);
-
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(archer_c7_v4_mdio0_info,
- ARRAY_SIZE(archer_c7_v4_mdio0_info));
-
- ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac);
- ath79_register_pci();
-
- /* GMAC0 is connected to an AR8337 switch */
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V4, "ARCHER-C7-V4", "TP-LINK Archer C7 v4",
- archer_c7_v4_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c
deleted file mode 100644
index 0dec008314..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7-v5.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Atheros ARCHER_C7 reference board support
- *
- * Copyright (c) 2018 Arvid E. Picciani <aep@exys.org>
- * Copyright (c) 2017 Felix Fietkau <nbd@nbd.name>
- * Copyright (c) 2014 The Linux Foundation. All rights reserved.
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <linux/proc_fs.h>
-#include <linux/gpio.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/74x164.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-
-
-#define ARCHER_C7_GPIO_BTN_RESET 5
-#define ARCHER_C7_GPIO_BTN_WPS_WIFI 2
-
-#define ARCHER_C7_GPIO_LED_WLAN5 9
-#define ARCHER_C7_GPIO_LED_POWER 6
-#define ARCHER_C7_GPIO_LED_USB 7
-#define ARCHER_C7_GPIO_LED_WPS 1
-#define ARCHER_C7_GPIO_LED_LAN1 8
-#define ARCHER_C7_GPIO_LED_LAN2 17
-#define ARCHER_C7_GPIO_LED_LAN3 16
-#define ARCHER_C7_GPIO_LED_LAN4 15
-#define ARCHER_C7_GPIO_LED_WAN_GREEN 21
-#define ARCHER_C7_GPIO_LED_WAN_AMBER 20
-#define ARCHER_C7_GPIO_LED_WLAN2 14
-#define ARCHER_C7_GPIO_USB_PWR 19
-
-#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL)
-
-#define ARCHER_C7_MAC0_OFFSET 0
-#define ARCHER_C7_MAC1_OFFSET 6
-#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000
-
-#define ARCHER_C7_GPIO_MDC 3
-#define ARCHER_C7_GPIO_MDIO 4
-
-static struct gpio_led archer_c7_v5_leds_gpio[] __initdata = {
- {
- .name = "archer-c7-v5:green:power",
- .gpio = ARCHER_C7_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "archer-c7-v5:green:wps",
- .gpio = ARCHER_C7_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "archer-c7-v5:green:wlan2g",
- .gpio = ARCHER_C7_GPIO_LED_WLAN2,
- .active_low = 1,
- }, {
- .name = "archer-c7-v5:green:wlan5g",
- .gpio = ARCHER_C7_GPIO_LED_WLAN5,
- .active_low = 1,
- }, {
- .name = "archer-c7-v5:green:lan1",
- .gpio = ARCHER_C7_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "archer-c7-v5:green:lan2",
- .gpio = ARCHER_C7_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "archer-c7-v5:green:lan3",
- .gpio = ARCHER_C7_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "archer-c7-v5:green:lan4",
- .gpio = ARCHER_C7_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "archer-c7-v5:green:wan",
- .gpio = ARCHER_C7_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "archer-c7-v5:amber:wan",
- .gpio = ARCHER_C7_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- }, {
- .name = "archer-c7-v5:green:usb",
- .gpio = ARCHER_C7_GPIO_LED_USB,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button archer_c7_v5_gpio_keys[] __initdata = {
- {
- .desc = "WPS and WIFI button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C7_GPIO_BTN_WPS_WIFI,
- .active_low = 1,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C7_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-
-static struct ar8327_pad_cfg archer_c7_v5_ar8337_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data archer_c7_v5_ar8337_data = {
- .pad0_cfg = &archer_c7_v5_ar8337_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info archer_c7_v5_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &archer_c7_v5_ar8337_data,
- },
-};
-
-
-static void __init archer_c7_v5_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1f060008);
-
- ath79_register_m25p80(NULL);
-
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_v5_leds_gpio),
- archer_c7_v5_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(archer_c7_v5_gpio_keys),
- archer_c7_v5_gpio_keys);
-
- ath79_register_usb();
-
- ath79_gpio_output_select(ARCHER_C7_GPIO_MDC, QCA956X_GPIO_OUT_MUX_GE0_MDC);
- ath79_gpio_output_select(ARCHER_C7_GPIO_MDIO, QCA956X_GPIO_OUT_MUX_GE0_MDO);
-
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(archer_c7_v5_mdio0_info,
- ARRAY_SIZE(archer_c7_v5_mdio0_info));
-
- gpio_request_one(ARCHER_C7_GPIO_USB_PWR,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-
- ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac);
- ath79_register_pci();
-
- /* GMAC0 is connected to an AR8337 switch */
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V5, "ARCHER-C7-V5", "TP-LINK Archer C7 v5",
- archer_c7_v5_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c
deleted file mode 100644
index 53c539f85a..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c7.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * TP-LINK Archer C5/C7/TL-WDR4900 v2 board support
- *
- * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2014 施康成 <tenninjas@tenninjas.ca>
- * Copyright (c) 2014 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on the Qualcomm Atheros AP135/AP136 reference board support code
- * Copyright (c) 2012 Qualcomm Atheros
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define ARCHER_C7_GPIO_LED_WLAN2G 12
-#define ARCHER_C7_GPIO_LED_SYSTEM 14
-#define ARCHER_C7_GPIO_LED_QSS 15
-#define ARCHER_C7_GPIO_LED_WLAN5G 17
-#define ARCHER_C7_GPIO_LED_USB1 18
-#define ARCHER_C7_GPIO_LED_USB2 19
-
-#define ARCHER_C7_GPIO_BTN_RFKILL 23
-#define ARCHER_C7_V2_GPIO_BTN_RFKILL 23
-#define ARCHER_C7_GPIO_BTN_RESET 16
-
-#define ARCHER_C7_GPIO_USB1_POWER 22
-#define ARCHER_C7_GPIO_USB2_POWER 21
-
-#define ARCHER_C7_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ARCHER_C7_KEYS_DEBOUNCE_INTERVAL (3 * ARCHER_C7_KEYS_POLL_INTERVAL)
-
-#define ARCHER_C7_WMAC_CALDATA_OFFSET 0x1000
-#define ARCHER_C7_PCIE_CALDATA_OFFSET 0x5000
-
-static const char *archer_c7_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data archer_c7_flash_data = {
- .part_probes = archer_c7_part_probes,
-};
-
-static struct gpio_led archer_c7_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:qss",
- .gpio = ARCHER_C7_GPIO_LED_QSS,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:system",
- .gpio = ARCHER_C7_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wlan2g",
- .gpio = ARCHER_C7_GPIO_LED_WLAN2G,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wlan5g",
- .gpio = ARCHER_C7_GPIO_LED_WLAN5G,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:usb1",
- .gpio = ARCHER_C7_GPIO_LED_USB1,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:usb2",
- .gpio = ARCHER_C7_GPIO_LED_USB2,
- .active_low = 1,
- },
-};
-
-static struct gpio_led wdr4900_leds_gpio[] __initdata = {
- {
- .name = "tp-link:blue:qss",
- .gpio = ARCHER_C7_GPIO_LED_QSS,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:system",
- .gpio = ARCHER_C7_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:wlan2g",
- .gpio = ARCHER_C7_GPIO_LED_WLAN2G,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:usb1",
- .gpio = ARCHER_C7_GPIO_LED_USB1,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:usb2",
- .gpio = ARCHER_C7_GPIO_LED_USB2,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button archer_c7_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C7_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "RFKILL switch",
- .type = EV_SW,
- .code = KEY_RFKILL,
- .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C7_GPIO_BTN_RFKILL,
- },
-};
-
-static struct gpio_keys_button archer_c7_v2_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C7_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "RFKILL switch",
- .type = EV_SW,
- .code = KEY_RFKILL,
- .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C7_V2_GPIO_BTN_RFKILL,
- },
-};
-
-static struct gpio_keys_button wdr4900_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = ARCHER_C7_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ARCHER_C7_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static const struct ar8327_led_info archer_c7_leds_ar8327[] = {
- AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:wan"),
- AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan1"),
- AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"),
- AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan3"),
- AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:lan4"),
-};
-
-/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
-static struct ar8327_pad_cfg archer_c7_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
-static struct ar8327_pad_cfg archer_c7_ar8327_pad6_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_led_cfg archer_c7_ar8327_led_cfg = {
- .led_ctrl0 = 0xc737c737,
- .led_ctrl1 = 0x00000000,
- .led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x0030c300,
- .open_drain = false,
-};
-
-static struct ar8327_platform_data archer_c7_ar8327_data = {
- .pad0_cfg = &archer_c7_ar8327_pad0_cfg,
- .pad6_cfg = &archer_c7_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &archer_c7_ar8327_led_cfg,
- .num_leds = ARRAY_SIZE(archer_c7_leds_ar8327),
- .leds = archer_c7_leds_ar8327,
-};
-
-static struct mdio_board_info archer_c7_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &archer_c7_ar8327_data,
- },
-};
-
-static void __init common_setup(bool pcie_slot)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
- u8 tmpmac2[ETH_ALEN];
-
- ath79_register_m25p80(&archer_c7_flash_data);
-
- if (pcie_slot) {
- ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, mac);
- ath79_register_pci();
- } else {
- ath79_init_mac(tmpmac, mac, -1);
- ath79_register_wmac(art + ARCHER_C7_WMAC_CALDATA_OFFSET, tmpmac);
-
- ath79_init_mac(tmpmac2, mac, -2);
- ap9x_pci_setup_wmac_led_pin(0, 0);
- ap91_pci_init(art + ARCHER_C7_PCIE_CALDATA_OFFSET, tmpmac2);
- }
-
- mdiobus_register_board_info(archer_c7_mdio0_info,
- ARRAY_SIZE(archer_c7_mdio0_info));
- ath79_register_mdio(0, 0x0);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x56000000;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_eth(1);
-
- gpio_request_one(ARCHER_C7_GPIO_USB1_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB1 power");
- gpio_request_one(ARCHER_C7_GPIO_USB2_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB2 power");
- ath79_register_usb();
-}
-
-static void __init archer_c5_setup(void)
-{
- ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(archer_c7_gpio_keys),
- archer_c7_gpio_keys);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio),
- archer_c7_leds_gpio);
- common_setup(true);
-}
-
-MIPS_MACHINE(ATH79_MACH_ARCHER_C5, "ARCHER-C5", "TP-LINK Archer C5",
- archer_c5_setup);
-
-static void __init archer_c7_setup(void)
-{
- ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(archer_c7_gpio_keys),
- archer_c7_gpio_keys);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio),
- archer_c7_leds_gpio);
- common_setup(true);
-}
-
-MIPS_MACHINE(ATH79_MACH_ARCHER_C7, "ARCHER-C7", "TP-LINK Archer C7",
- archer_c7_setup);
-
-static void __init archer_c7_v2_setup(void)
-{
- ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(archer_c7_v2_gpio_keys),
- archer_c7_v2_gpio_keys);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c7_leds_gpio),
- archer_c7_leds_gpio);
- common_setup(true);
-}
-
-MIPS_MACHINE(ATH79_MACH_ARCHER_C7_V2, "ARCHER-C7-V2", "TP-LINK Archer C7",
- archer_c7_v2_setup);
-
-static void __init tl_wdr4900_v2_setup(void)
-{
- ath79_register_gpio_keys_polled(-1, ARCHER_C7_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wdr4900_gpio_keys),
- wdr4900_gpio_keys);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr4900_leds_gpio),
- wdr4900_leds_gpio);
- common_setup(false);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WDR4900_V2, "TL-WDR4900-v2", "TP-LINK TL-WDR4900 v2",
- tl_wdr4900_v2_setup)
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
deleted file mode 100644
index 8ab07d514b..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-arduino-yun.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Arduino Yun support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-// Uncomment to have reset on gpio18 instead of gipo7
-#define DS2_B
-
-#define DS_GPIO_LED_WLAN 0
-#define DS_GPIO_LED_USB 1
-
-#define DS_GPIO_OE 21
-#define DS_GPIO_AVR_RESET 18
-
-// Maintained to have the console in the previous version of DS2 working
-#define DS_GPIO_AVR_RESET_DS2 7
-
-#define DS_GPIO_OE2 22
-#define DS_GPIO_UART_ENA 23
-#define DS_GPIO_CONF_BTN 20
-
-#define DS_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DS_KEYS_DEBOUNCE_INTERVAL (3 * DS_KEYS_POLL_INTERVAL)
-
-#define DS_MAC0_OFFSET 0x0000
-#define DS_MAC1_OFFSET 0x0006
-#define DS_CALDATA_OFFSET 0x1000
-#define DS_WMAC_MAC_OFFSET 0x1002
-
-
-static struct gpio_led ds_leds_gpio[] __initdata = {
- {
- .name = "arduino:white:usb",
- .gpio = DS_GPIO_LED_USB,
- .active_low = 0,
- },
- {
- .name = "arduino:blue:wlan",
- .gpio = DS_GPIO_LED_WLAN,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button ds_gpio_keys[] __initdata = {
- {
- .desc = "configuration button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DS_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DS_GPIO_CONF_BTN,
- .active_low = 1,
- },
-};
-
-static void __init ds_common_setup(void)
-{
- static u8 mac[6];
-
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- ath79_register_m25p80(NULL);
-
- if (ar93xx_wmac_read_mac_address(mac)) {
- ath79_register_wmac(NULL, NULL);
- } else {
- ath79_register_wmac(art + DS_CALDATA_OFFSET,
- art + DS_WMAC_MAC_OFFSET);
- memcpy(mac, art + DS_WMAC_MAC_OFFSET, sizeof(mac));
- }
-
- mac[3] |= 0x08;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- mac[3] &= 0xF7;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
-
- /* WAN port */
- ath79_register_eth(0);
-}
-
-static void __init ds_setup(void)
-{
- u32 t;
-
- ds_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ds_leds_gpio),
- ds_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DS_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ds_gpio_keys),
- ds_gpio_keys);
- ath79_register_usb();
-
- /* use the swtich_led directly form sysfs */
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN);
-
- //Disable the Function for some pins to have GPIO functionality active
- // GPIO6-7-8 and GPIO11
- ath79_gpio_function_setup(AR933X_GPIO_FUNC_JTAG_DISABLE | AR933X_GPIO_FUNC_I2S_MCK_EN, 0);
-
- ath79_gpio_function2_setup(AR933X_GPIO_FUNC2_JUMPSTART_DISABLE, 0);
-
- printk("Setting DogStick2 GPIO\n");
-
- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
- t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
- ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
-
- // Put the avr reset to high
- if (gpio_request_one(DS_GPIO_AVR_RESET_DS2,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0)
- printk("Error setting GPIO OE\n");
- gpio_unexport(DS_GPIO_AVR_RESET_DS2);
- gpio_free(DS_GPIO_AVR_RESET_DS2);
-
- // enable OE of level shifter
- if (gpio_request_one(DS_GPIO_OE,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-1") != 0)
- printk("Error setting GPIO OE\n");
-
- if (gpio_request_one(DS_GPIO_UART_ENA,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "UART-ENA") != 0)
- printk("Error setting GPIO Uart Enable\n");
-
- // enable OE of level shifter
- if (gpio_request_one(DS_GPIO_OE2,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED, "OE-2") != 0)
- printk("Error setting GPIO OE2\n");
-}
-
-MIPS_MACHINE(ATH79_MACH_ARDUINO_YUN, "Yun", "Arduino Yun", ds_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-aw-nr580.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-aw-nr580.c
deleted file mode 100644
index 281129b787..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-aw-nr580.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * AzureWave AW-NR580 board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define AW_NR580_GPIO_LED_READY_RED 0
-#define AW_NR580_GPIO_LED_WLAN 1
-#define AW_NR580_GPIO_LED_READY_GREEN 2
-#define AW_NR580_GPIO_LED_WPS_GREEN 4
-#define AW_NR580_GPIO_LED_WPS_AMBER 5
-
-#define AW_NR580_GPIO_BTN_WPS 3
-#define AW_NR580_GPIO_BTN_RESET 11
-
-#define AW_NR580_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AW_NR580_KEYS_DEBOUNCE_INTERVAL (3 * AW_NR580_KEYS_POLL_INTERVAL)
-
-static struct gpio_led aw_nr580_leds_gpio[] __initdata = {
- {
- .name = "aw-nr580:red:ready",
- .gpio = AW_NR580_GPIO_LED_READY_RED,
- .active_low = 0,
- }, {
- .name = "aw-nr580:green:ready",
- .gpio = AW_NR580_GPIO_LED_READY_GREEN,
- .active_low = 0,
- }, {
- .name = "aw-nr580:green:wps",
- .gpio = AW_NR580_GPIO_LED_WPS_GREEN,
- .active_low = 0,
- }, {
- .name = "aw-nr580:amber:wps",
- .gpio = AW_NR580_GPIO_LED_WPS_AMBER,
- .active_low = 0,
- }, {
- .name = "aw-nr580:green:wlan",
- .gpio = AW_NR580_GPIO_LED_WLAN,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button aw_nr580_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AW_NR580_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = AW_NR580_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AW_NR580_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static const char *aw_nr580_part_probes[] = {
- "RedBoot",
- NULL,
-};
-
-static struct flash_platform_data aw_nr580_flash_data = {
- .part_probes = aw_nr580_part_probes,
-};
-
-static void __init aw_nr580_setup(void)
-{
- ath79_register_mdio(0, 0x0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
-
- ath79_register_pci();
-
- ath79_register_m25p80(&aw_nr580_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(aw_nr580_leds_gpio),
- aw_nr580_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, AW_NR580_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(aw_nr580_gpio_keys),
- aw_nr580_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_AW_NR580, "AW-NR580", "AzureWave AW-NR580",
- aw_nr580_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c
deleted file mode 100644
index 1630845cf8..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * Buffalo BHR-4GRV2 board support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com>
- *
- * Based on mach-ap136.c and mach-wzr-450hp2.c
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define BHR_4GRV2_GPIO_LED_VPN_RED 3
-#define BHR_4GRV2_GPIO_LED_VPN_GREEN 18
-#define BHR_4GRV2_GPIO_LED_POWER_GREEN 19
-#define BHR_4GRV2_GPIO_LED_DIAG_RED 20
-
-#define BHR_4GRV2_GPIO_BTN_RESET 17
-#define BHR_4GRV2_GPIO_BTN_ECO 21
-
-#define BHR_4GRV2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL (3 * BHR_4GRV2_KEYS_POLL_INTERVAL)
-#define BHR_4GRV2_MAC0_OFFSET 0
-#define BHR_4GRV2_MAC1_OFFSET 6
-
-static struct gpio_led bhr_4grv2_leds_gpio[] __initdata = {
- {
- .name = "buffalo:red:vpn",
- .gpio = BHR_4GRV2_GPIO_LED_VPN_RED,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:vpn",
- .gpio = BHR_4GRV2_GPIO_LED_VPN_GREEN,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:power",
- .gpio = BHR_4GRV2_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- },
- {
- .name = "buffalo:red:diag",
- .gpio = BHR_4GRV2_GPIO_LED_DIAG_RED,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button bhr_4grv2_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = BHR_4GRV2_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "ECO button",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = BHR_4GRV2_GPIO_BTN_ECO,
- .active_low = 1,
- },
-};
-
-/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
-static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-/* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
-static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad6_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data bhr_4grv2_ar8327_data = {
- .pad0_cfg = &bhr_4grv2_ar8327_pad0_cfg,
- .pad6_cfg = &bhr_4grv2_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info bhr_4grv2_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &bhr_4grv2_ar8327_data,
- },
-};
-
-static void __init bhr_4grv2_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(bhr_4grv2_leds_gpio),
- bhr_4grv2_leds_gpio);
- ath79_register_gpio_keys_polled(-1, BHR_4GRV2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(bhr_4grv2_gpio_keys),
- bhr_4grv2_gpio_keys);
-
- mdiobus_register_board_info(bhr_4grv2_mdio0_info,
- ARRAY_SIZE(bhr_4grv2_mdio0_info));
- ath79_register_mdio(0, 0x0);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- /* GMAC0 is connected to the RGMII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x56000000;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + BHR_4GRV2_MAC0_OFFSET, 0);
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, art + BHR_4GRV2_MAC1_OFFSET, 0);
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_BHR_4GRV2, "BHR-4GRV2",
- "Buffalo BHR-4GRV2", bhr_4grv2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c
deleted file mode 100644
index 8d7c6112d7..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-bhu-bxu2000n2-a.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * BHU BXU2000n-2 A1 board support
- *
- * Copyright (C) 2013 Terry Yang <yangbo@bhunetworks.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define BHU_BXU2000N2_A1_GPIO_LED_WLAN 13
-#define BHU_BXU2000N2_A1_GPIO_LED_WAN 19
-#define BHU_BXU2000N2_A1_GPIO_LED_LAN 21
-#define BHU_BXU2000N2_A1_GPIO_LED_SYSTEM 14
-
-#define BHU_BXU2000N2_A1_GPIO_BTN_RESET 17
-
-#define BHU_BXU2000N2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL \
- (3 * BHU_BXU2000N2_KEYS_POLL_INTERVAL)
-
-static const char *bhu_bxu2000n2_part_probes[] = {
- "cmdlinepart",
- NULL,
-};
-
-static struct flash_platform_data bhu_bxu2000n2_flash_data = {
- .part_probes = bhu_bxu2000n2_part_probes,
-};
-
-static struct gpio_led bhu_bxu2000n2_a1_leds_gpio[] __initdata = {
- {
- .name = "bhu:green:status",
- .gpio = BHU_BXU2000N2_A1_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "bhu:green:lan",
- .gpio = BHU_BXU2000N2_A1_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "bhu:green:wan",
- .gpio = BHU_BXU2000N2_A1_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "bhu:green:wlan",
- .gpio = BHU_BXU2000N2_A1_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button bhu_bxu2000n2_a1_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = BHU_BXU2000N2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = BHU_BXU2000N2_A1_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init bhu_ap123_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&bhu_bxu2000n2_flash_data);
-
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
- /* GMAC0 is connected to the PHY4 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the internal switch. Only use PHY3 */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.phy_mask = BIT(3);
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, ee+2);
-}
-
-static void __init bhu_bxu2000n2_a1_setup(void)
-{
- bhu_ap123_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(bhu_bxu2000n2_a1_leds_gpio),
- bhu_bxu2000n2_a1_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, BHU_BXU2000N2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(bhu_bxu2000n2_a1_gpio_keys),
- bhu_bxu2000n2_a1_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_BHU_BXU2000N2_A1, "BXU2000n-2-A1",
- "BHU BXU2000n-2 rev. A1",
- bhu_bxu2000n2_a1_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-bsb.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-bsb.c
deleted file mode 100644
index 9f9be02eb3..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-bsb.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Smart Electronics Black Swift board support
- *
- * Copyright (C) 2014 Dmitriy Zherebkov dzh@black-swift.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define BSB_GPIO_LED_SYS 27
-
-#define BSB_GPIO_BTN_RESET 11
-
-#define BSB_KEYS_POLL_INTERVAL 20 /* msecs */
-#define BSB_KEYS_DEBOUNCE_INTERVAL (3 * BSB_KEYS_POLL_INTERVAL)
-
-#define BSB_MAC_OFFSET 0x0000
-#define BSB_CALDATA_OFFSET 0x1000
-
-static struct gpio_led bsb_leds_gpio[] __initdata = {
- {
- .name = "bsb:red:sys",
- .gpio = BSB_GPIO_LED_SYS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button bsb_gpio_keys[] __initdata = {
- {
- .desc = "reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = BSB_KEYS_DEBOUNCE_INTERVAL,
- .gpio = BSB_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init bsb_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false,false);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(bsb_leds_gpio),
- bsb_leds_gpio);
- ath79_register_gpio_keys_polled(-1, BSB_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(bsb_gpio_keys),
- bsb_gpio_keys);
-
- ath79_register_usb();
-
- ath79_register_m25p80(NULL);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + BSB_MAC_OFFSET, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, art + BSB_MAC_OFFSET, 2);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_wmac(art + BSB_CALDATA_OFFSET,
- art + BSB_MAC_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_BSB, "BSB", "Smart Electronics Black Swift board",
- bsb_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-c55.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-c55.c
deleted file mode 100644
index 8aa5ecb6a8..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-c55.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * AirTight Networks C-55 board support
- *
- * Copyright (C) 2014-2015 Chris Blake <chrisrblake93@gmail.com>
- *
- * Based on Senao CAP4200AG board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define C55_GPIO_LED_PWR_GREEN 12
-#define C55_GPIO_LED_PWR_AMBER 13
-#define C55_GPIO_LED_LAN_GREEN 14
-#define C55_GPIO_LED_LAN_AMBER 15
-#define C55_GPIO_LED_WLAN_GREEN 18
-#define C55_GPIO_LED_WLAN_AMBER 19
-
-#define C55_GPIO_BTN_RESET 17
-
-#define C55_KEYS_POLL_INTERVAL 20 /* msecs */
-#define C55_KEYS_DEBOUNCE_INTERVAL (3 * C55_KEYS_POLL_INTERVAL)
-
-#define C55_MAC_OFFSET 0
-#define C55_WMAC_CALDATA_OFFSET 0x1000
-#define C55_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led c55_leds_gpio[] __initdata = {
- {
- .name = "c-55:green:pwr",
- .gpio = C55_GPIO_LED_PWR_GREEN,
- .active_low = 1,
- },
- {
- .name = "c-55:amber:pwr",
- .gpio = C55_GPIO_LED_PWR_AMBER,
- .active_low = 1,
- },
- {
- .name = "c-55:green:lan",
- .gpio = C55_GPIO_LED_LAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "c-55:amber:lan",
- .gpio = C55_GPIO_LED_LAN_AMBER,
- .active_low = 1,
- },
- {
- .name = "c-55:green:wlan",
- .gpio = C55_GPIO_LED_WLAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "c-55:amber:wlan",
- .gpio = C55_GPIO_LED_WLAN_AMBER,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button c55_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = C55_KEYS_DEBOUNCE_INTERVAL,
- .gpio = C55_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init c55_setup(void)
-{
- /* SPI Storage*/
- ath79_register_m25p80(NULL);
-
- /* MDIO Interface */
- ath79_register_mdio(0, 0x0);
-
- /* AR8035-A Ethernet */
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_SW_ONLY_MODE);
- ath79_init_mac(ath79_eth0_data.mac_addr, NULL, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-
- /* LEDs & GPIO */
- ath79_gpio_output_select(C55_GPIO_LED_LAN_GREEN,
- AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(C55_GPIO_LED_LAN_AMBER,
- AR934X_GPIO_OUT_GPIO);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(c55_leds_gpio),
- c55_leds_gpio);
- ath79_register_gpio_keys_polled(-1, C55_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(c55_gpio_keys),
- c55_gpio_keys);
-
- /* WiFi */
- ath79_wmac_disable_2ghz();
- ath79_register_wmac_simple();
- ap91_pci_init_simple();
-
-}
-MIPS_MACHINE(ATH79_MACH_C55, "C-55", "AirTight Networks C-55",
- c55_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c
deleted file mode 100644
index bccf2e5873..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-c60.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * AirTight Networks C-60 board support
- *
- * Copyright (C) 2016 Christian Lamparter <chunkeey@googlemail.com>
- *
- * Based on AirTight Networks C-55 board support
- *
- * Copyright (C) 2014-2015 Chris Blake <chrisrblake93@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/version.h>
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/mtd/mtd.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/platform/ar934x_nfc.h>
-#include <linux/ar8216_platform.h>
-#include <linux/ath9k_platform.h>
-#include <linux/version.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "dev-usb.h"
-#include "dev-nfc.h"
-#include "machtypes.h"
-
-#define C60_GPIO_LED_PWR_AMBER 11
-#define C60_GPIO_LED_WLAN2_GREEN 12
-#define C60_GPIO_LED_WLAN2_AMBER 13
-#define C60_GPIO_LED_PWR_GREEN 16
-
-#define C60_GPIO_BTN_RESET 17
-
-/* GPIOs of the AR9300 PCIe chip */
-#define C60_GPIO_WMAC_LED_WLAN1_AMBER 0
-#define C60_GPIO_WMAC_LED_WLAN1_GREEN 3
-
-#define C60_KEYS_POLL_INTERVAL 20 /* msecs */
-#define C60_KEYS_DEBOUNCE_INTERVAL (3 * C60_KEYS_POLL_INTERVAL)
-
-#define C60_ART_ADDR 0x1f7f0000
-#define C60_ART_SIZE 0xffff
-#define C60_MAC_OFFSET 0
-#define C60_WMAC_CALDATA_OFFSET 0x1000
-#define C60_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led c60_leds_gpio[] __initdata = {
- {
- .name = "c-60:amber:pwr",
- .gpio = C60_GPIO_LED_PWR_AMBER,
- .active_low = 1,
- },
- {
- .name = "c-60:green:pwr",
- .gpio = C60_GPIO_LED_PWR_GREEN,
- .active_low = 1,
- },
- {
- .name = "c-60:green:wlan2",
- .gpio = C60_GPIO_LED_WLAN2_GREEN,
- .active_low = 1,
- },
- {
- .name = "c-60:amber:wlan2",
- .gpio = C60_GPIO_LED_WLAN2_AMBER,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button c60_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = C60_KEYS_DEBOUNCE_INTERVAL,
- .gpio = C60_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg c60_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data c60_ar8327_data = {
- .pad0_cfg = &c60_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- }
-};
-
-static struct mdio_board_info c60_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &c60_ar8327_data,
- },
-};
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
-static struct nand_ecclayout c60_nand_ecclayout = {
- .eccbytes = 7,
- .eccpos = { 4, 8, 9, 10, 13, 14, 15 },
- .oobavail = 9,
- .oobfree = { { 0, 3 }, { 6, 2 }, { 11, 2 }, }
-};
-
-#else
-
-static int c60_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 4;
- oobregion->length = 1;
- return 0;
- case 1:
- oobregion->offset = 8;
- oobregion->length = 3;
- return 0;
- case 2:
- oobregion->offset = 13;
- oobregion->length = 3;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static int c60_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 0;
- oobregion->length = 3;
- return 0;
- case 1:
- oobregion->offset = 6;
- oobregion->length = 2;
- return 0;
- case 2:
- oobregion->offset = 11;
- oobregion->length = 2;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static const struct mtd_ooblayout_ops c60_nand_ecclayout_ops = {
- .ecc = c60_ooblayout_ecc,
- .free = c60_ooblayout_free,
-};
-#endif /* < 4.6 */
-
-static int c60_nand_scan_fixup(struct mtd_info *mtd)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- struct nand_chip *chip = mtd->priv;
-#else
- struct nand_chip *chip = mtd_to_nand(mtd);
-#endif
-
- chip->ecc.size = 512;
- chip->ecc.strength = 4;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- chip->ecc.layout = &c60_nand_ecclayout;
-#else
- mtd_set_ooblayout(mtd, &c60_nand_ecclayout_ops);
-#endif
- return 0;
-}
-
-static struct gpio_led c60_wmac0_leds_gpio[] = {
- {
- .name = "c-60:amber:wlan1",
- .gpio = C60_GPIO_WMAC_LED_WLAN1_AMBER,
- .active_low = 1,
- },
- {
- .name = "c-60:green:wlan1",
- .gpio = C60_GPIO_WMAC_LED_WLAN1_GREEN,
- .active_low = 1,
- },
-};
-
-static void __init c60_setup(void)
-{
- u8 tmpmac[6];
- u8 *art = (u8 *) KSEG1ADDR(C60_ART_ADDR);
-
- /* NAND */
- ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_SOFT_BCH);
- ath79_nfc_set_scan_fixup(c60_nand_scan_fixup);
- ath79_register_nfc();
-
- /* SPI Storage*/
- ath79_register_m25p80(NULL);
-
- /* AR8327 Switch Ethernet */
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-
- mdiobus_register_board_info(c60_mdio0_info,
- ARRAY_SIZE(c60_mdio0_info));
-
- ath79_register_mdio(0, 0x0);
-
- /* GMAC0 is connected to an AR8327N switch */
- ath79_init_mac(ath79_eth0_data.mac_addr, art + C60_MAC_OFFSET, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-
- /* LEDs & GPIO */
- ath79_register_leds_gpio(-1, ARRAY_SIZE(c60_leds_gpio),
- c60_leds_gpio);
- ath79_register_gpio_keys_polled(-1, C60_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(c60_gpio_keys),
- c60_gpio_keys);
- ap9x_pci_setup_wmac_leds(0, c60_wmac0_leds_gpio,
- ARRAY_SIZE(c60_wmac0_leds_gpio));
- /* USB */
- ath79_register_usb();
-
- /* WiFi */
- ath79_init_mac(tmpmac, art + C60_MAC_OFFSET, 1);
- ap91_pci_init(art + C60_PCIE_CALDATA_OFFSET, tmpmac);
- ath79_init_mac(tmpmac, art + C60_MAC_OFFSET, 2);
- ath79_register_wmac(art + C60_WMAC_CALDATA_OFFSET, tmpmac);
-}
-MIPS_MACHINE(ATH79_MACH_C60, "C-60", "AirTight Networks C-60",
- c60_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c
deleted file mode 100644
index dffbb81bd4..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cap324.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * PowerCloud Systems CAP324 board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2012-2013 PowerCloud Systems
- * Copyright (C) 2015 Daniel Dickinson
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define CAP324_GPIO_LED_POWER_GREEN 12
-#define CAP324_GPIO_LED_POWER_AMBER 13
-#define CAP324_GPIO_LED_LAN_GREEN 14
-#define CAP324_GPIO_LED_LAN_AMBER 15
-#define CAP324_GPIO_LED_WLAN_GREEN 18
-#define CAP324_GPIO_LED_WLAN_AMBER 19
-
-#define CAP324_GPIO_BTN_RESET 17
-
-#define CAP324_KEYS_POLL_INTERVAL 20 /* msecs */
-#define CAP324_KEYS_DEBOUNCE_INTERVAL (3 * CAP324_KEYS_POLL_INTERVAL)
-
-#define CAP324_MAC_OFFSET 0
-#define CAP324_WMAC_CALDATA_OFFSET 0x1000
-#define CAP324_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led cap324_leds_gpio[] __initdata = {
- {
- .name = "pcs:green:power",
- .gpio = CAP324_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- },
- {
- .name = "pcs:amber:power",
- .gpio = CAP324_GPIO_LED_POWER_AMBER,
- .active_low = 1,
- },
- {
- .name = "pcs:green:lan",
- .gpio = CAP324_GPIO_LED_LAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "pcs:amber:lan",
- .gpio = CAP324_GPIO_LED_LAN_AMBER,
- .active_low = 1,
- },
- {
- .name = "pcs:green:wlan",
- .gpio = CAP324_GPIO_LED_WLAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "pcs:amber:wlan",
- .gpio = CAP324_GPIO_LED_WLAN_AMBER,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button cap324_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = CAP324_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CAP324_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init cap324_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 mac[6];
-
- ath79_gpio_output_select(CAP324_GPIO_LED_LAN_GREEN,
- AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(CAP324_GPIO_LED_LAN_AMBER,
- AR934X_GPIO_OUT_GPIO);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cap324_leds_gpio),
- cap324_leds_gpio);
- ath79_register_gpio_keys_polled(-1, CAP324_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cap324_gpio_keys),
- cap324_gpio_keys);
-
- ath79_init_mac(mac, art + CAP324_MAC_OFFSET, -2);
- ath79_wmac_disable_2ghz();
- ath79_register_wmac(art + CAP324_WMAC_CALDATA_OFFSET, mac);
-
- ath79_init_mac(mac, art + CAP324_MAC_OFFSET, -1);
- ap91_pci_init(art + CAP324_PCIE_CALDATA_OFFSET, mac);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + CAP324_MAC_OFFSET, 0);
-
- /* GMAC0 is connected to an external PHY */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_CAP324, "CAP324", "PowerCloud Systems CAP324",
- cap324_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cap4200ag.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cap4200ag.c
deleted file mode 100644
index 18944c40fa..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cap4200ag.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Senao CAP4200AG board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define CAP4200AG_GPIO_LED_PWR_GREEN 12
-#define CAP4200AG_GPIO_LED_PWR_AMBER 13
-#define CAP4200AG_GPIO_LED_LAN_GREEN 14
-#define CAP4200AG_GPIO_LED_LAN_AMBER 15
-#define CAP4200AG_GPIO_LED_WLAN_GREEN 18
-#define CAP4200AG_GPIO_LED_WLAN_AMBER 19
-
-#define CAP4200AG_GPIO_BTN_RESET 17
-
-#define CAP4200AG_KEYS_POLL_INTERVAL 20 /* msecs */
-#define CAP4200AG_KEYS_DEBOUNCE_INTERVAL (3 * CAP4200AG_KEYS_POLL_INTERVAL)
-
-#define CAP4200AG_MAC_OFFSET 0
-#define CAP4200AG_WMAC_CALDATA_OFFSET 0x1000
-#define CAP4200AG_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led cap4200ag_leds_gpio[] __initdata = {
- {
- .name = "senao:green:pwr",
- .gpio = CAP4200AG_GPIO_LED_PWR_GREEN,
- .active_low = 1,
- },
- {
- .name = "senao:amber:pwr",
- .gpio = CAP4200AG_GPIO_LED_PWR_AMBER,
- .active_low = 1,
- },
- {
- .name = "senao:green:lan",
- .gpio = CAP4200AG_GPIO_LED_LAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "senao:amber:lan",
- .gpio = CAP4200AG_GPIO_LED_LAN_AMBER,
- .active_low = 1,
- },
- {
- .name = "senao:green:wlan",
- .gpio = CAP4200AG_GPIO_LED_WLAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "senao:amber:wlan",
- .gpio = CAP4200AG_GPIO_LED_WLAN_AMBER,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button cap4200ag_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = CAP4200AG_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CAP4200AG_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init cap4200ag_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 mac[6];
-
- ath79_gpio_output_select(CAP4200AG_GPIO_LED_LAN_GREEN,
- AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(CAP4200AG_GPIO_LED_LAN_AMBER,
- AR934X_GPIO_OUT_GPIO);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cap4200ag_leds_gpio),
- cap4200ag_leds_gpio);
- ath79_register_gpio_keys_polled(-1, CAP4200AG_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cap4200ag_gpio_keys),
- cap4200ag_gpio_keys);
-
- ath79_init_mac(mac, art + CAP4200AG_MAC_OFFSET, -1);
- ath79_wmac_disable_2ghz();
- ath79_register_wmac(art + CAP4200AG_WMAC_CALDATA_OFFSET, mac);
-
- ath79_init_mac(mac, art + CAP4200AG_MAC_OFFSET, -2);
- ap91_pci_init(art + CAP4200AG_PCIE_CALDATA_OFFSET, mac);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + CAP4200AG_MAC_OFFSET, -2);
-
- /* GMAC0 is connected to an external PHY */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_CAP4200AG, "CAP4200AG", "Senao CAP4200AG",
- cap4200ag_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-carambola2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-carambola2.c
deleted file mode 100644
index babe101141..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-carambola2.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * 8devices Carambola2 board support
- *
- * Copyright (C) 2013 Darius Augulis <darius@8devices.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define CARAMBOLA2_GPIO_LED_WLAN 0
-#define CARAMBOLA2_GPIO_LED_ETH0 14
-#define CARAMBOLA2_GPIO_LED_ETH1 13
-
-#define CARAMBOLA2_GPIO_BTN_JUMPSTART 11
-
-#define CARAMBOLA2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define CARAMBOLA2_KEYS_DEBOUNCE_INTERVAL (3 * CARAMBOLA2_KEYS_POLL_INTERVAL)
-
-#define CARAMBOLA2_MAC0_OFFSET 0x0000
-#define CARAMBOLA2_MAC1_OFFSET 0x0006
-#define CARAMBOLA2_CALDATA_OFFSET 0x1000
-#define CARAMBOLA2_WMAC_MAC_OFFSET 0x1002
-
-static struct gpio_led carambola2_leds_gpio[] __initdata = {
- {
- .name = "carambola2:green:wlan",
- .gpio = CARAMBOLA2_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "carambola2:orange:eth0",
- .gpio = CARAMBOLA2_GPIO_LED_ETH0,
- .active_low = 0,
- }, {
- .name = "carambola2:orange:eth1",
- .gpio = CARAMBOLA2_GPIO_LED_ETH1,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button carambola2_gpio_keys[] __initdata = {
- {
- .desc = "jumpstart button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = CARAMBOLA2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CARAMBOLA2_GPIO_BTN_JUMPSTART,
- .active_low = 1,
- },
-};
-
-static void __init carambola2_common_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
- ath79_register_wmac(art + CARAMBOLA2_CALDATA_OFFSET,
- art + CARAMBOLA2_WMAC_MAC_OFFSET);
-
- ath79_setup_ar933x_phy4_switch(true, true);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + CARAMBOLA2_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art + CARAMBOLA2_MAC1_OFFSET, 0);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
-
- /* WAN port */
- ath79_register_eth(0);
-}
-
-static void __init carambola2_setup(void)
-{
- carambola2_common_setup();
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(carambola2_leds_gpio),
- carambola2_leds_gpio);
- ath79_register_gpio_keys_polled(-1, CARAMBOLA2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(carambola2_gpio_keys),
- carambola2_gpio_keys);
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_CARAMBOLA2, "CARAMBOLA2", "8devices Carambola2 board",
- carambola2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
deleted file mode 100644
index 82174ba935..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cf-e316n-v2.c
+++ /dev/null
@@ -1,765 +0,0 @@
-/*
- * Support for COMFAST boards:
- * - CF-E316N v2 (AR9341)
- * - CF-E320N v2 (QCA9531)
- * - CF-E355AC v1 (QCA9531 + QCA9882)
- * - CF-E355AC v2 (QCA9531 + QCA9886)
- * - CF-E375AC (QCA9563 + QCA9886 + QCA8337)
- * - CF-E380AC v1/v2 (QCA9558)
- * - CF-E385AC (QCA9558 + QCA9984 + QCA8337)
- * - CF-E520N/CF-E530N (QCA9531)
- *
- * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
- * Copyright (C) 2016 Gareth Parker <gareth41@orcon.net.nz>
- * Copyright (C) 2015 Paul Fertser <fercerpav@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/ar8216_platform.h>
-#include <linux/platform_data/phy-at803x.h>
-#include <linux/platform_device.h>
-#include <linux/timer.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define CF_EXXXN_KEYS_POLL_INTERVAL 20
-#define CF_EXXXN_KEYS_DEBOUNCE_INTERVAL (3 * CF_EXXXN_KEYS_POLL_INTERVAL)
-
-/* CF-E316N v2 */
-#define CF_E316N_V2_GPIO_LED_DIAG_B 0
-#define CF_E316N_V2_GPIO_LED_DIAG_R 2
-#define CF_E316N_V2_GPIO_LED_DIAG_G 3
-#define CF_E316N_V2_GPIO_LED_WLAN 12
-#define CF_E316N_V2_GPIO_LED_WAN 17
-#define CF_E316N_V2_GPIO_LED_LAN 19
-
-#define CF_E316N_V2_GPIO_EXT_WDT 16
-
-#define CF_E316N_V2_GPIO_EXTERNAL_PA0 13
-#define CF_E316N_V2_GPIO_EXTERNAL_PA1 14
-
-#define CF_E316N_V2_GPIO_BTN_RESET 20
-
-static struct gpio_led cf_e316n_v2_leds_gpio[] __initdata = {
- {
- .name = "cf-e316n-v2:blue:diag",
- .gpio = CF_E316N_V2_GPIO_LED_DIAG_B,
- .active_low = 0,
- }, {
- .name = "cf-e316n-v2:red:diag",
- .gpio = CF_E316N_V2_GPIO_LED_DIAG_R,
- .active_low = 0,
- }, {
- .name = "cf-e316n-v2:green:diag",
- .gpio = CF_E316N_V2_GPIO_LED_DIAG_G,
- .active_low = 0,
- }, {
- .name = "cf-e316n-v2:blue:wlan",
- .gpio = CF_E316N_V2_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "cf-e316n-v2:blue:wan",
- .gpio = CF_E316N_V2_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "cf-e316n-v2:blue:lan",
- .gpio = CF_E316N_V2_GPIO_LED_LAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button cf_e316n_v2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CF_E316N_V2_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-/* CF-E320N v2 */
-#define CF_E320N_V2_GPIO_LED_WLAN 0
-#define CF_E320N_V2_GPIO_LED_WAN 2
-#define CF_E320N_V2_GPIO_LED_LAN 3
-
-#define CF_E320N_V2_GPIO_HEADER_J9_1 14
-#define CF_E320N_V2_GPIO_HEADER_J9_2 12
-#define CF_E320N_V2_GPIO_HEADER_J9_3 11
-#define CF_E320N_V2_GPIO_HEADER_J9_4 16
-
-#define CF_E320N_V2_GPIO_EXT_WDT 13
-
-#define CF_E320N_V2_GPIO_BTN_RESET 17
-
-static struct gpio_led cf_e320n_v2_leds_gpio[] __initdata = {
- {
- .name = "cf-e320n-v2:green:lan",
- .gpio = CF_E320N_V2_GPIO_LED_LAN,
- .active_low = 0,
- }, {
- .name = "cf-e320n-v2:red:wan",
- .gpio = CF_E320N_V2_GPIO_LED_WAN,
- .active_low = 0,
- }, {
- .name = "cf-e320n-v2:blue:wlan",
- .gpio = CF_E320N_V2_GPIO_LED_WLAN,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button cf_e320n_v2_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CF_E320N_V2_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-/* CF-E355AC v1/v2 */
-#define CF_E355AC_GPIO_LED_LAN 3
-#define CF_E355AC_GPIO_LED_WLAN2G 0
-#define CF_E355AC_GPIO_LED_WLAN5G 2
-
-#define CF_E355AC_GPIO_EXT_WDT 13
-
-#define CF_E355AC_GPIO_BTN_RESET 17
-
-static struct gpio_led cf_e355ac_v1_leds_gpio[] __initdata = {
- {
- .name = "cf-e355ac-v1:green:lan",
- .gpio = CF_E355AC_GPIO_LED_LAN,
- .active_low = 0,
- }, {
- .name = "cf-e355ac-v1:blue:wlan2g",
- .gpio = CF_E355AC_GPIO_LED_WLAN2G,
- .active_low = 0,
- }, {
- .name = "cf-e355ac-v1:red:wlan5g",
- .gpio = CF_E355AC_GPIO_LED_WLAN5G,
- .active_low = 0,
- },
-};
-
-static struct gpio_led cf_e355ac_v2_leds_gpio[] __initdata = {
- {
- .name = "cf-e355ac-v2:green:lan",
- .gpio = CF_E355AC_GPIO_LED_LAN,
- .active_low = 0,
- }, {
- .name = "cf-e355ac-v2:blue:wlan2g",
- .gpio = CF_E355AC_GPIO_LED_WLAN2G,
- .active_low = 0,
- }, {
- .name = "cf-e355ac-v2:red:wlan5g",
- .gpio = CF_E355AC_GPIO_LED_WLAN5G,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button cf_e355ac_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CF_E355AC_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-/* CF-E375AC */
-#define CF_E375AC_GPIO_LED_LAN 17
-#define CF_E375AC_GPIO_LED_WLAN2G 16
-#define CF_E375AC_GPIO_LED_WLAN5G 15
-
-#define CF_E375AC_GPIO_EXT_WDT 6
-
-#define CF_E375AC_GPIO_BTN_RESET 2
-
-static struct gpio_led cf_e375ac_leds_gpio[] __initdata = {
- {
- .name = "cf-e375ac:green:lan",
- .gpio = CF_E375AC_GPIO_LED_LAN,
- .active_low = 0,
- }, {
- .name = "cf-e375ac:red:wlan5g",
- .gpio = CF_E375AC_GPIO_LED_WLAN5G,
- .active_low = 0,
- }, {
- .name = "cf-e375ac:blue:wlan2g",
- .gpio = CF_E375AC_GPIO_LED_WLAN2G,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button cf_e375ac_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CF_E375AC_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg cf_e375ac_ar8337_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data cf_e375ac_ar8337_data = {
- .pad0_cfg = &cf_e375ac_ar8337_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info cf_e375ac_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &cf_e375ac_ar8337_data,
- },
-};
-
-/* CF-E380AC v1/v2, CF-E385AC */
-#define CF_E38XAC_GPIO_LED_LAN 0
-#define CF_E38XAC_GPIO_LED_WLAN2G 2
-#define CF_E38XAC_GPIO_LED_WLAN5G 3
-
-#define CF_E38XAC_GPIO_EXT_WDT 17
-
-#define CF_E38XAC_GPIO_BTN_RESET 19
-
-static struct gpio_led cf_e380ac_v1_leds_gpio[] __initdata = {
- {
- .name = "cf-e380ac-v1:green:lan",
- .gpio = CF_E38XAC_GPIO_LED_LAN,
- .active_low = 0,
- }, {
- .name = "cf-e380ac-v1:blue:wlan2g",
- .gpio = CF_E38XAC_GPIO_LED_WLAN2G,
- .active_low = 0,
- }, {
- .name = "cf-e380ac-v1:red:wlan5g",
- .gpio = CF_E38XAC_GPIO_LED_WLAN5G,
- .active_low = 0,
- },
-};
-
-static struct gpio_led cf_e380ac_v2_leds_gpio[] __initdata = {
- {
- .name = "cf-e380ac-v2:green:lan",
- .gpio = CF_E38XAC_GPIO_LED_LAN,
- .active_low = 0,
- }, {
- .name = "cf-e380ac-v2:blue:wlan2g",
- .gpio = CF_E38XAC_GPIO_LED_WLAN2G,
- .active_low = 0,
- }, {
- .name = "cf-e380ac-v2:red:wlan5g",
- .gpio = CF_E38XAC_GPIO_LED_WLAN5G,
- .active_low = 0,
- },
-};
-
-static struct gpio_led cf_e385ac_leds_gpio[] __initdata = {
- {
- .name = "cf-e385ac:green:lan",
- .gpio = CF_E38XAC_GPIO_LED_LAN,
- .active_low = 0,
- }, {
- .name = "cf-e385ac:blue:wlan2g",
- .gpio = CF_E38XAC_GPIO_LED_WLAN2G,
- .active_low = 0,
- }, {
- .name = "cf-e385ac:red:wlan5g",
- .gpio = CF_E38XAC_GPIO_LED_WLAN5G,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button cf_e38xac_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = CF_EXXXN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CF_E38XAC_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct at803x_platform_data cf_e380ac_v1v2_at803x_data = {
- .disable_smarteee = 1,
-};
-
-static struct mdio_board_info cf_e380ac_v1v2_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &cf_e380ac_v1v2_at803x_data,
- },
-};
-
-/* CF-E520N/CF-E530N */
-#define CF_E5X0N_GPIO_LED_WAN 11
-#define CF_E5X0N_GPIO_BTN_RESET 17
-
-static struct gpio_led cf_e520n_leds_gpio[] __initdata = {
- {
- .name = "cf-e520n:blue:wan",
- .gpio = CF_E5X0N_GPIO_LED_WAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_led cf_e530n_leds_gpio[] __initdata = {
- {
- .name = "cf-e530n:blue:wan",
- .gpio = CF_E5X0N_GPIO_LED_WAN,
- .active_low = 1,
- }
-};
-
-/*
- * Some COMFAST devices include external hardware watchdog chip,
- * Pericon Technology PT7A7514, connected to a selected GPIO
- * and WiSoC RESET_L input. Watchdog time-out is ~1.6 s.
- */
-#define CF_EXXXN_EXT_WDT_TIMEOUT_MS 500
-
-static struct timer_list gpio_wdt_timer;
-
-static void gpio_wdt_toggle(unsigned long gpio)
-{
- static int state;
-
- state = !state;
- gpio_set_value(gpio, state);
-
- mod_timer(&gpio_wdt_timer,
- jiffies + msecs_to_jiffies(CF_EXXXN_EXT_WDT_TIMEOUT_MS));
-}
-
-static void __init cf_exxxn_common_setup(unsigned long art_ofs, int gpio_wdt)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1f001000 + art_ofs);
-
- if (gpio_wdt > -1) {
- gpio_request_one(gpio_wdt, GPIOF_OUT_INIT_HIGH,
- "PT7A7514 watchdog");
-
- setup_timer(&gpio_wdt_timer, gpio_wdt_toggle, gpio_wdt);
- gpio_wdt_toggle(gpio_wdt);
- }
-
- ath79_register_m25p80(NULL);
-
- ath79_register_wmac(art, NULL);
-
- ath79_register_usb();
-}
-
-static void __init cf_e316n_v2_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f010000);
-
- cf_exxxn_common_setup(0x10000, CF_E316N_V2_GPIO_EXT_WDT);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
-
- ath79_register_mdio(1, 0x0);
-
- /* GMAC0 is connected to the PHY0 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
- ath79_register_eth(1);
-
- /* Enable 2x Skyworks SE2576L WLAN power amplifiers */
- gpio_request_one(CF_E316N_V2_GPIO_EXTERNAL_PA0, GPIOF_OUT_INIT_HIGH,
- "WLAN PA0");
- gpio_request_one(CF_E316N_V2_GPIO_EXTERNAL_PA1, GPIOF_OUT_INIT_HIGH,
- "WLAN PA1");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e316n_v2_leds_gpio),
- cf_e316n_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, CF_EXXXN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cf_e316n_v2_gpio_keys),
- cf_e316n_v2_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_CF_E316N_V2, "CF-E316N-V2", "COMFAST CF-E316N v2",
- cf_e316n_v2_setup);
-
-static void __init cf_exxxn_qca953x_eth_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f010000);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask |= BIT(4);
-
- /* LAN */
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-}
-
-static void __init cf_e320n_v2_setup(void)
-{
- cf_exxxn_common_setup(0x10000, CF_E320N_V2_GPIO_EXT_WDT);
-
- cf_exxxn_qca953x_eth_setup();
-
- /* Disable JTAG (enables GPIO0-3) */
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
-
- ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_LAN, true);
- ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_WAN, true);
- ath79_gpio_direction_select(CF_E320N_V2_GPIO_LED_WLAN, true);
-
- ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_LAN, 0);
- ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_WAN, 0);
- ath79_gpio_output_select(CF_E320N_V2_GPIO_LED_WLAN, 0);
-
- /* Enable GPIO function for GPIOs in J9 header */
- ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_1, 0);
- ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_2, 0);
- ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_3, 0);
- ath79_gpio_output_select(CF_E320N_V2_GPIO_HEADER_J9_4, 0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e320n_v2_leds_gpio),
- cf_e320n_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cf_e320n_v2_gpio_keys),
- cf_e320n_v2_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_CF_E320N_V2, "CF-E320N-V2", "COMFAST CF-E320N v2",
- cf_e320n_v2_setup);
-
-static void __init cf_e355ac_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1f010000);
-
- /* Disable JTAG, enabling GPIOs 0-3 */
- ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, 0);
-
- cf_exxxn_common_setup(0x10000, CF_E355AC_GPIO_EXT_WDT);
-
- cf_exxxn_qca953x_eth_setup();
-
- ath79_gpio_output_select(CF_E355AC_GPIO_LED_LAN, 0);
- ath79_gpio_output_select(CF_E355AC_GPIO_LED_WLAN2G, 0);
- ath79_gpio_output_select(CF_E355AC_GPIO_LED_WLAN5G, 0);
-
- ap91_pci_init(art + 0x5000, NULL);
-
- ath79_register_gpio_keys_polled(1, CF_EXXXN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cf_e355ac_gpio_keys),
- cf_e355ac_gpio_keys);
-}
-
-static void __init cf_e355ac_v1_setup(void)
-{
- cf_e355ac_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e355ac_v1_leds_gpio),
- cf_e355ac_v1_leds_gpio);
-}
-
-static void __init cf_e355ac_v2_setup(void)
-{
- cf_e355ac_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e355ac_v2_leds_gpio),
- cf_e355ac_v2_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_CF_E355AC, "CF-E355AC-V1", "COMFAST CF-E355AC v1",
- cf_e355ac_v1_setup);
-
-MIPS_MACHINE(ATH79_MACH_CF_E355AC_V2, "CF-E355AC-V2", "COMFAST CF-E355AC v2",
- cf_e355ac_v2_setup);
-
-static void __init cf_e375ac_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f040000);
-
- /* Disable JTAG, enabling GPIOs 0-3 */
- ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, 0);
-
- cf_exxxn_common_setup(0x40000, CF_E375AC_GPIO_EXT_WDT);
-
- ath79_gpio_output_select(CF_E375AC_GPIO_LED_LAN, 0);
- ath79_gpio_output_select(CF_E375AC_GPIO_LED_WLAN2G, 0);
- ath79_gpio_output_select(CF_E375AC_GPIO_LED_WLAN5G, 0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e375ac_leds_gpio),
- cf_e375ac_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cf_e375ac_gpio_keys),
- cf_e375ac_gpio_keys);
-
- platform_device_register(&ath79_mdio0_device);
-
- mdiobus_register_board_info(cf_e375ac_mdio0_info,
- ARRAY_SIZE(cf_e375ac_mdio0_info));
-
- /* GMAC0 is connected to an AR8337 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_CF_E375AC, "CF-E375AC", "COMFAST CF-E375AC",
- cf_e375ac_setup);
-
-static void __init cf_e38xac_common_setup(unsigned long art_ofs)
-{
- cf_exxxn_common_setup(art_ofs, CF_E38XAC_GPIO_EXT_WDT);
-
- ath79_register_pci();
-
- /* Disable JTAG (enables GPIO0-3) */
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
-
- ath79_gpio_direction_select(CF_E38XAC_GPIO_LED_LAN, true);
- ath79_gpio_direction_select(CF_E38XAC_GPIO_LED_WLAN2G, true);
- ath79_gpio_direction_select(CF_E38XAC_GPIO_LED_WLAN5G, true);
-
- ath79_gpio_output_select(CF_E38XAC_GPIO_LED_LAN, 0);
- ath79_gpio_output_select(CF_E38XAC_GPIO_LED_WLAN2G, 0);
- ath79_gpio_output_select(CF_E38XAC_GPIO_LED_WLAN5G, 0);
-
- /* For J7-4 */
- ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
-
- ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cf_e38xac_gpio_keys),
- cf_e38xac_gpio_keys);
-}
-
-static void __init cf_e380ac_v1v2_common_setup(unsigned long art_ofs)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f000000 + art_ofs);
-
- cf_e38xac_common_setup(art_ofs);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- ath79_register_mdio(0, 0x0);
- mdiobus_register_board_info(cf_e380ac_v1v2_mdio0_info,
- ARRAY_SIZE(cf_e380ac_v1v2_mdio0_info));
-
- /* LAN */
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_pll_data.pll_1000 = 0xbe000000;
- ath79_eth0_pll_data.pll_100 = 0xb0000101;
- ath79_eth0_pll_data.pll_10 = 0xb0001313;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-}
-
-static void __init cf_e380ac_v1_setup(void)
-{
- cf_e380ac_v1v2_common_setup(0x20000);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e380ac_v1_leds_gpio),
- cf_e380ac_v1_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_CF_E380AC_V1, "CF-E380AC-V1", "COMFAST CF-E380AC v1",
- cf_e380ac_v1_setup);
-
-static void __init cf_e380ac_v2_setup(void)
-{
- cf_e380ac_v1v2_common_setup(0x40000);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e380ac_v2_leds_gpio),
- cf_e380ac_v2_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_CF_E380AC_V2, "CF-E380AC-V2", "COMFAST CF-E380AC v2",
- cf_e380ac_v2_setup);
-
-/* QCA8337 GMAC0 is connected with QCA9558 over RGMII */
-static struct ar8327_pad_cfg cf_e385ac_qca8337_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-};
-
-/* QCA8337 GMAC6 is connected with QCA9558 over SGMII */
-static struct ar8327_pad_cfg cf_e385ac_qca8337_pad6_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
-};
-
-static struct ar8327_platform_data cf_e385ac_qca8337_data = {
- .pad0_cfg = &cf_e385ac_qca8337_pad0_cfg,
- .pad6_cfg = &cf_e385ac_qca8337_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info cf_e385ac_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &cf_e385ac_qca8337_data,
- },
-};
-
-static void __init cf_e385ac_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f040000);
-
- cf_e38xac_common_setup(0x40000);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e385ac_leds_gpio),
- cf_e385ac_leds_gpio);
-
- mdiobus_register_board_info(cf_e385ac_mdio0_info,
- ARRAY_SIZE(cf_e385ac_mdio0_info));
- ath79_register_mdio(0, 0x0);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- /* QCA9558 GMAC0 is connected to RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x96000000;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-
- /* QCA9558 GMAC1 is connected to SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_CF_E385AC, "CF-E385AC", "COMFAST CF-E385AC",
- cf_e385ac_setup);
-
-static void __init cf_e5x0n_gpio_setup(void)
-{
- ath79_gpio_direction_select(CF_E5X0N_GPIO_LED_WAN, true);
-
- ath79_gpio_output_select(CF_E5X0N_GPIO_LED_WAN, 0);
-
- ath79_register_gpio_keys_polled(-1, CF_EXXXN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cf_e320n_v2_gpio_keys),
- cf_e320n_v2_gpio_keys);
-}
-
-static void __init cf_e520n_setup(void)
-{
- cf_exxxn_common_setup(0x10000, -1);
-
- cf_exxxn_qca953x_eth_setup();
-
- cf_e5x0n_gpio_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e520n_leds_gpio),
- cf_e520n_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_CF_E520N, "CF-E520N", "COMFAST CF-E520N",
- cf_e520n_setup);
-
-static void __init cf_e530n_setup(void)
-{
- cf_exxxn_common_setup(0x10000, -1);
-
- cf_exxxn_qca953x_eth_setup();
-
- cf_e5x0n_gpio_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cf_e530n_leds_gpio),
- cf_e530n_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_CF_E530N, "CF-E530N", "COMFAST CF-E530N",
- cf_e530n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
deleted file mode 100644
index 49d9cf9bb5..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * TP-LINK CPE210/210 v2/220/510/520 board support
- *
- * Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
- * Copyright (C) 2017 Robert Marko <robimarko@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-
-#define CPE510_GPIO_LED_LAN0 11
-#define CPE510_GPIO_LED_LAN1 12
-#define CPE510_GPIO_LED_L1 13
-#define CPE510_GPIO_LED_L2 14
-#define CPE510_GPIO_LED_L3 15
-#define CPE510_GPIO_LED_L4 16
-
-/* All LEDs/button except for link4 are the same for CPE and WBS series */
-#define WBS510_GPIO_LED_L4 2
-
-#define CPE510_GPIO_EXTERNAL_LNA0 18
-#define CPE510_GPIO_EXTERNAL_LNA1 19
-
-#define CPE510_GPIO_BTN_RESET 4
-
-#define CPE510_KEYS_POLL_INTERVAL 20 /* msecs */
-#define CPE510_KEYS_DEBOUNCE_INTERVAL (3 * CPE510_KEYS_POLL_INTERVAL)
-
-/* CPE210 v2 reset GPIO */
-#define CPE210_V2_GPIO_BTN_RESET 17
-
-static struct gpio_led cpe510_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan0",
- .gpio = CPE510_GPIO_LED_LAN0,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan1",
- .gpio = CPE510_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:link1",
- .gpio = CPE510_GPIO_LED_L1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:link2",
- .gpio = CPE510_GPIO_LED_L2,
- .active_low = 1,
- }, {
- .name = "tp-link:green:link3",
- .gpio = CPE510_GPIO_LED_L3,
- .active_low = 1,
- }, {
- .name = "tp-link:green:link4",
- .gpio = CPE510_GPIO_LED_L4,
- .active_low = 1,
- },
-};
-
-static struct gpio_led wbs510_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan0",
- .gpio = CPE510_GPIO_LED_LAN0,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan1",
- .gpio = CPE510_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:link1",
- .gpio = CPE510_GPIO_LED_L1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:link2",
- .gpio = CPE510_GPIO_LED_L2,
- .active_low = 1,
- }, {
- .name = "tp-link:green:link3",
- .gpio = CPE510_GPIO_LED_L3,
- .active_low = 1,
- }, {
- .name = "tp-link:green:link4",
- .gpio = WBS510_GPIO_LED_L4,
- .active_low = 1,
- },
-};
-
-static struct gpio_led cpe210_v2_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan0",
- .gpio = CPE510_GPIO_LED_LAN0,
- .active_low = 1,
- }, {
- .name = "tp-link:green:link1",
- .gpio = CPE510_GPIO_LED_L1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:link2",
- .gpio = CPE510_GPIO_LED_L2,
- .active_low = 1,
- }, {
- .name = "tp-link:green:link3",
- .gpio = CPE510_GPIO_LED_L3,
- .active_low = 1,
- }, {
- .name = "tp-link:green:link4",
- .gpio = CPE510_GPIO_LED_L4,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button cpe510_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = CPE510_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CPE510_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button cpe210_v2_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = CPE510_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CPE210_V2_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init cpe_setup(u8 *mac)
-{
- /* Disable JTAG, enabling GPIOs 0-3 */
- /* Configure OBS4 line, for GPIO 4*/
- ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
- AR934X_GPIO_FUNC_CLK_OBS4_EN);
-
- ath79_register_gpio_keys_polled(1, CPE510_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cpe510_gpio_keys),
- cpe510_gpio_keys);
-
- ath79_wmac_set_ext_lna_gpio(0, CPE510_GPIO_EXTERNAL_LNA0);
- ath79_wmac_set_ext_lna_gpio(1, CPE510_GPIO_EXTERNAL_LNA1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_mdio(1, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-}
-
-
-static void __init cpe210_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe510_leds_gpio),
- cpe510_leds_gpio);
-
- cpe_setup(mac);
-
- ath79_register_wmac(ee, mac);
-}
-
-static void __init cpe510_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe510_leds_gpio),
- cpe510_leds_gpio);
-
- cpe_setup(mac);
-
- ath79_register_wmac(ee, mac);
-}
-
-static void __init wbs_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wbs510_leds_gpio),
- wbs510_leds_gpio);
-
- cpe_setup(mac);
-
- ath79_register_wmac(ee, mac);
-}
-
-static void __init cpe210_v2_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe210_v2_leds_gpio),
- cpe210_v2_leds_gpio);
- ath79_register_gpio_keys_polled(-1, CPE510_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cpe210_v2_gpio_keys),
- cpe210_v2_gpio_keys);
- ath79_register_m25p80(NULL);
- ath79_register_mdio(0, 0x0);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
- ath79_register_wmac(ee, mac);
-}
-
-static void __init cpe510_v2_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f830008);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe210_v2_leds_gpio),
- cpe210_v2_leds_gpio);
- ath79_register_gpio_keys_polled(-1, CPE510_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cpe510_gpio_keys),
- cpe510_gpio_keys);
-
- ath79_register_m25p80(NULL);
- ath79_register_mdio(1, 0x0);
-
- /* LAN port */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_CPE210, "CPE210", "TP-LINK CPE210/220",
- cpe210_setup);
-
-MIPS_MACHINE(ATH79_MACH_CPE210_V2, "CPE210V2", "TP-LINK CPE210 v2",
- cpe210_v2_setup);
-
-MIPS_MACHINE(ATH79_MACH_CPE210_V3, "CPE210V3", "TP-LINK CPE210 v3",
- cpe210_v2_setup);
-
-MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE510/520",
- cpe510_setup);
-
-MIPS_MACHINE(ATH79_MACH_CPE510_V2, "CPE510V2", "TP-LINK CPE510 v2",
- cpe510_v2_setup);
-
-MIPS_MACHINE(ATH79_MACH_WBS210, "WBS210", "TP-LINK WBS210",
- wbs_setup);
-
-MIPS_MACHINE(ATH79_MACH_WBS510, "WBS510", "TP-LINK WBS510",
- wbs_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c
deleted file mode 100644
index 284cdc71c2..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * YunCore CPE870 board support
- *
- * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define CPE870_GPIO_LED_LINK1 0
-#define CPE870_GPIO_LED_LINK2 1
-#define CPE870_GPIO_LED_LINK3 2
-#define CPE870_GPIO_LED_LINK4 3
-#define CPE870_GPIO_LED_WLAN 13
-#define CPE870_GPIO_LED_WAN 19
-#define CPE870_GPIO_LED_LAN 20
-
-#define CPE870_GPIO_BTN_RESET 16
-
-#define CPE870_KEYS_POLL_INTERVAL 20
-#define CPE870_KEYS_DEBOUNCE_INTERVAL (3 * CPE870_KEYS_POLL_INTERVAL)
-
-static struct gpio_led cpe870_leds_gpio[] __initdata = {
- {
- .name = "cpe870:green:lan",
- .gpio = CPE870_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "cpe870:green:wan",
- .gpio = CPE870_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "cpe870:green:wlan",
- .gpio = CPE870_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "cpe870:green:link1",
- .gpio = CPE870_GPIO_LED_LINK1,
- .active_low = 1,
- },
- {
- .name = "cpe870:green:link2",
- .gpio = CPE870_GPIO_LED_LINK2,
- .active_low = 1,
- },
- {
- .name = "cpe870:green:link3",
- .gpio = CPE870_GPIO_LED_LINK3,
- .active_low = 1,
- },
- {
- .name = "cpe870:green:link4",
- .gpio = CPE870_GPIO_LED_LINK4,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button cpe870_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = CPE870_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CPE870_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init cpe870_gpio_setup(void)
-{
- /* Disable JTAG (enables GPIO0-3) */
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
-
- ath79_gpio_direction_select(CPE870_GPIO_LED_LINK1, true);
- ath79_gpio_direction_select(CPE870_GPIO_LED_LINK2, true);
- ath79_gpio_direction_select(CPE870_GPIO_LED_LINK3, true);
- ath79_gpio_direction_select(CPE870_GPIO_LED_LINK4, true);
-
- /* Mute LEDs on boot */
- gpio_set_value(CPE870_GPIO_LED_LAN, 1);
- gpio_set_value(CPE870_GPIO_LED_WAN, 1);
- gpio_set_value(CPE870_GPIO_LED_LINK1, 1);
- gpio_set_value(CPE870_GPIO_LED_LINK2, 1);
- gpio_set_value(CPE870_GPIO_LED_LINK3, 1);
- gpio_set_value(CPE870_GPIO_LED_LINK4, 1);
-
- ath79_gpio_output_select(CPE870_GPIO_LED_LINK1, 0);
- ath79_gpio_output_select(CPE870_GPIO_LED_LINK2, 0);
- ath79_gpio_output_select(CPE870_GPIO_LED_LINK3, 0);
- ath79_gpio_output_select(CPE870_GPIO_LED_LINK4, 0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe870_leds_gpio),
- cpe870_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, CPE870_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cpe870_gpio_keys),
- cpe870_gpio_keys);
-}
-
-static void __init cpe870_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- cpe870_gpio_setup();
-
- ath79_register_mdio(1, 0x0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
-
- /* LAN */
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-
- ath79_register_wmac(art, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_CPE870, "CPE870", "YunCore CPE870", cpe870_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr3000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cr3000.c
deleted file mode 100644
index 235b0ec769..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr3000.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * PowerCloud Systems CR3000 support
- *
- * Copyright (c) 2011 Qualcomm Atheros
- * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2012-2013 PowerCloud Systems
- * Copyright (c) 2015 Daniel Dickinson <openwrt@daniel.thecshore.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/gpio.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define CR3000_GPIO_LED_WLAN_2G 13
-#define CR3000_GPIO_LED_POWER_AMBER 15
-#define CR3000_GPIO_LED_WAN 18
-#define CR3000_GPIO_LED_LAN1 19
-#define CR3000_GPIO_LED_LAN2 20
-#define CR3000_GPIO_LED_LAN3 21
-#define CR3000_GPIO_LED_LAN4 22
-
-#define CR3000_GPIO_BTN_WPS 16
-#define CR3000_GPIO_BTN_RESET 17
-
-#define CR3000_KEYS_POLL_INTERVAL 20 /* msecs */
-#define CR3000_KEYS_DEBOUNCE_INTERVAL (3 * CR3000_KEYS_POLL_INTERVAL)
-
-#define CR3000_MAC0_OFFSET 0
-#define CR3000_MAC1_OFFSET 6
-#define CR3000_WMAC_CALDATA_OFFSET 0x1000
-#define CR3000_WMAC_MAC_OFFSET 0x1002
-
-static struct gpio_led cr3000_leds_gpio[] __initdata = {
- {
- .name = "pcs:amber:power",
- .gpio = CR3000_GPIO_LED_POWER_AMBER,
- .active_low = 1,
- },
- {
- .name = "pcs:blue:wlan",
- .gpio = CR3000_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
- .name = "pcs:blue:wan",
- .gpio = CR3000_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "pcs:blue:lan1",
- .gpio = CR3000_GPIO_LED_LAN1,
- .active_low = 1,
- },
- {
- .name = "pcs:blue:lan2",
- .gpio = CR3000_GPIO_LED_LAN2,
- .active_low = 1,
- },
- {
- .name = "pcs:blue:lan3",
- .gpio = CR3000_GPIO_LED_LAN3,
- .active_low = 1,
- },
- {
- .name = "pcs:blue:lan4",
- .gpio = CR3000_GPIO_LED_LAN4,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button cr3000_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = CR3000_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CR3000_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = CR3000_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CR3000_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init cr3000_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cr3000_leds_gpio),
- cr3000_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, CR3000_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cr3000_gpio_keys),
- cr3000_gpio_keys);
-
- /* WLAN 2GHz onboard */
- ath79_register_wmac(art + CR3000_WMAC_CALDATA_OFFSET, art + CR3000_WMAC_MAC_OFFSET);
-
- /* FE Lan on first 4-ports of internal switch and attached to GMAC1
- * WAN Fast Ethernet interface attached to GMAC0
- * Could be configured as a 5-port switch, but we use
- * the SoC capabilities to attach port 5 to a separate PHY/MAC
- * theoretically this leaves future possibility of using SoC
- * acceleration/offloading.
- */
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
-
- /* GMAC0 attached to PHY4 (port 5 of the internal switch) */
- ath79_switch_data.phy4_mii_en = 1;
- /* For switch carrier ignore port 5 (wan) */
- ath79_switch_data.phy_poll_mask = 0x1;
-
- /* Register MII bus */
- ath79_register_mdio(1, 0x0);
-
- /* GMAC0 attached to PHY4 (port 5 of the internal switch) */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = 0x1;
-
- /* LAN */
- ath79_init_mac(ath79_eth1_data.mac_addr, art + CR3000_MAC0_OFFSET, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-
- /* Wan */
- ath79_init_mac(ath79_eth0_data.mac_addr, art + CR3000_MAC0_OFFSET, 1);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_CR3000, "CR3000", "PowerCloud Systems CR3000",
- cr3000_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c
deleted file mode 100644
index 7c41e7fbc0..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cr5000.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * PowerCloud Systems CR5000 support
- *
- * Copyright (c) 2011 Qualcomm Atheros
- * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2012-2013 PowerCloud Systems
- * Copyright (c) 2015 Daniel Dickinson <openwrt@daniel.thecshore.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/gpio.h>
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define CR5000_GPIO_LED_WLAN_2G 14
-#define CR5000_GPIO_LED_WPS 12
-#define CR5000_GPIO_LED_POWER_AMBER 4
-/* GPIO2 has to have JTAG disabled as it is also to
- * power led
- */
-#define CR5000_GPIO_LED_POWER_ENABLE 2
-#define CR5000_GPIO_BTN_WPS 16
-#define CR5000_GPIO_BTN_RESET 17
-
-#define CR5000_KEYS_POLL_INTERVAL 20 /* msecs */
-#define CR5000_KEYS_DEBOUNCE_INTERVAL (3 * CR5000_KEYS_POLL_INTERVAL)
-
-#define CR5000_MAC0_OFFSET 0
-#define CR5000_WMAC_CALDATA_OFFSET 0x1000
-#define CR5000_WMAC_MAC_OFFSET 0x1002
-#define CR5000_PCIE_CALDATA_OFFSET 0x5000
-#define CR5000_PCIE_WMAC_OFFSET 0x5002
-
-static struct gpio_led cr5000_leds_gpio[] __initdata = {
- {
- .name = "pcs:amber:power",
- .gpio = CR5000_GPIO_LED_POWER_AMBER,
- .active_low = 1,
- },
- {
- .name = "pcs:white:wps",
- .gpio = CR5000_GPIO_LED_WPS,
- .active_low = 1,
- },
- {
- .name = "pcs:blue:wlan",
- .gpio = CR5000_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button cr5000_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = CR5000_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CR5000_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = CR5000_KEYS_DEBOUNCE_INTERVAL,
- .gpio = CR5000_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg cr5000_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_led_cfg cr5000_ar8327_led_cfg = {
- .led_ctrl0 = 0xcc35cc35,
- .led_ctrl1 = 0xca35ca35,
- .led_ctrl2 = 0xc935c935,
- .led_ctrl3 = 0x03ffff00,
- .open_drain = true,
-};
-
-static struct ar8327_platform_data cr5000_ar8327_data = {
- .pad0_cfg = &cr5000_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &cr5000_ar8327_led_cfg,
-};
-
-static struct mdio_board_info cr5000_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &cr5000_ar8327_data,
- },
-};
-
-static void __init cr5000_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- struct ath9k_platform_data *pdata;
-
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
- gpio_request_one(CR5000_GPIO_LED_POWER_ENABLE,
- GPIOF_OUT_INIT_LOW, "Power LED enable");
- ath79_gpio_output_select(CR5000_GPIO_LED_POWER_AMBER, AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(CR5000_GPIO_LED_WLAN_2G, AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(CR5000_GPIO_LED_WPS, AR934X_GPIO_OUT_GPIO);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cr5000_leds_gpio),
- cr5000_leds_gpio);
- ath79_register_gpio_keys_polled(-1, CR5000_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(cr5000_gpio_keys),
- cr5000_gpio_keys);
- ath79_register_usb();
- ath79_register_wmac(art + CR5000_WMAC_CALDATA_OFFSET, art + CR5000_WMAC_MAC_OFFSET);
- ap91_pci_init(NULL, art + CR5000_PCIE_WMAC_OFFSET);
- pdata = ap9x_pci_get_wmac_data(0);
- if (pdata)
- pdata->use_eeprom = true;
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + CR5000_MAC0_OFFSET, 0);
-
- mdiobus_register_board_info(cr5000_mdio0_info,
- ARRAY_SIZE(cr5000_mdio0_info));
-
- /* GMAC0 is connected to an AR8327 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_CR5000, "CR5000", "PowerCloud Systems CR5000",
- cr5000_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-1330-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-1330-a1.c
deleted file mode 100644
index 9c50bc7e9b..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-1330-a1.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * D-Link DAP-1330
- *
- * Copyright (c) 2013-2015 The Linux Foundation. All rights reserved.
- * Copyright (c) 2017 Nicolò Veronese <nicveronese@gmail.com>
- * Copyright (c) 2017 Federico Cappon <dududede371@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#include <linux/kernel.h>
-#include <linux/vmalloc.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#define DAP_1330_GPIO_LED_GREEN_POWER 13
-#define DAP_1330_GPIO_LED_RED_POWER 3
-#define DAP_1330_GPIO_LED_GREEN_WIFI 14
-#define DAP_1330_GPIO_LED_RED_WIFI 11
-#define DAP_1330_GPIO_LED_SIGNAL1 15
-#define DAP_1330_GPIO_LED_SIGNAL2 16
-
-#define DAP_1330_GPIO_BTN_WPS 2
-#define DAP_1330_GPIO_BTN_RESET 17
-
-#define DAP_1330_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DAP_1330_KEYS_DEBOUNCE_INTERVAL (3 * DAP_1330_KEYS_POLL_INTERVAL)
-
-#define DAP1330_MAC_ADDR 0x1f020001
-
-#define DAP1330_WMAC_CALDATA_ADDR 0x1f010000
-#define DAP_1330_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led dap_1330_leds_gpio[] __initdata = {
- {
- .name = "d-link:green:power",
- .gpio = DAP_1330_GPIO_LED_GREEN_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:red:power",
- .gpio = DAP_1330_GPIO_LED_RED_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:green:wifi",
- .gpio = DAP_1330_GPIO_LED_GREEN_WIFI,
- .active_low = 1,
- },
- {
- .name = "d-link:red:wifi",
- .gpio = DAP_1330_GPIO_LED_RED_WIFI,
- .active_low = 1,
- },
- {
- .name = "d-link:green:signal1",
- .gpio = DAP_1330_GPIO_LED_SIGNAL1,
- .active_low = 1,
- },
- {
- .name = "d-link:green:signal2",
- .gpio = DAP_1330_GPIO_LED_SIGNAL2,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dap_1330_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DAP_1330_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DAP_1330_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DAP_1330_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DAP_1330_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init dap_1330_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(DAP1330_WMAC_CALDATA_ADDR);
- u8 *mac_ptr = (u8 *) KSEG1ADDR(DAP1330_MAC_ADDR);
- u8 mac[ETH_ALEN];
-
- ath79_parse_ascii_mac((char *) mac_ptr, mac);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dap_1330_leds_gpio),
- dap_1330_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DAP_1330_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dap_1330_gpio_keys),
- dap_1330_gpio_keys);
-
- ath79_register_wmac(art + DAP_1330_WMAC_CALDATA_OFFSET, mac);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_DAP_1330_A1, "DAP-1330-A1",
- "D-Link DAP-1330 Rev. A1", dap_1330_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c
deleted file mode 100644
index 2577dbffae..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dap-2695-a1.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * D-Link DAP-2695 rev. A1 support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2016 Stijn Tintel <stijn@linux-ipv6.be>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define DAP2695_GPIO_LED_GREEN_POWER 23
-#define DAP2695_GPIO_LED_RED_POWER 14
-#define DAP2695_GPIO_LED_WLAN_2G 13
-
-#define DAP2695_GPIO_BTN_RESET 17
-
-#define DAP2695_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DAP2695_KEYS_DEBOUNCE_INTERVAL (3 * DAP2695_KEYS_POLL_INTERVAL)
-
-#define DAP2695_NVRAM_ADDR 0x1f040000
-#define DAP2695_NVRAM_SIZE 0x10000
-
-#define DAP2695_MAC0_OFFSET 1
-#define DAP2695_MAC1_OFFSET 2
-#define DAP2695_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led dap2695_leds_gpio[] __initdata = {
- {
- .name = "d-link:green:power",
- .gpio = DAP2695_GPIO_LED_GREEN_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:red:power",
- .gpio = DAP2695_GPIO_LED_RED_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:green:wlan2g",
- .gpio = DAP2695_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button dap2695_gpio_keys[] __initdata = {
- {
- .desc = "Soft reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DAP2695_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DAP2695_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg dap2695_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- .mac06_exchange_dis = true,
-};
-
-static struct ar8327_pad_cfg dap2695_ar8327_pad6_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data dap2695_ar8327_data = {
- .pad0_cfg = &dap2695_ar8327_pad0_cfg,
- .pad6_cfg = &dap2695_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info dap2695_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &dap2695_ar8327_data,
- },
-};
-
-static struct flash_platform_data dap2695_flash_data = {
- .type = "mx25l12805d",
-};
-
-static void dap2695_get_mac(const char *name, char *mac)
-{
- u8 *nvram = (u8 *) KSEG1ADDR(DAP2695_NVRAM_ADDR);
- int err;
-
- err = ath79_nvram_parse_mac_addr(nvram, DAP2695_NVRAM_SIZE,
- name, mac);
- if (err)
- pr_err("no MAC address found for %s\n", name);
-}
-
-static void __init dap2695_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 mac0[ETH_ALEN], mac1[ETH_ALEN], wmac0[ETH_ALEN];
-
- dap2695_get_mac("lanmac=", mac0);
- dap2695_get_mac("wanmac=", mac1);
- dap2695_get_mac("wlanmac=", wmac0);
-
- ath79_register_m25p80(&dap2695_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dap2695_leds_gpio),
- dap2695_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DAP2695_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dap2695_gpio_keys),
- dap2695_gpio_keys);
-
- ath79_register_wmac(art + DAP2695_WMAC_CALDATA_OFFSET, wmac0);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(dap2695_mdio0_info,
- ARRAY_SIZE(dap2695_mdio0_info));
-
- /* GMAC0 is connected to the RGMII interface */
- ath79_init_mac(ath79_eth0_data.mac_addr, mac0, DAP2695_MAC0_OFFSET);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x56000000;
-
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_init_mac(ath79_eth1_data.mac_addr, mac1, DAP2695_MAC1_OFFSET);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- ath79_register_eth(1);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_DAP_2695_A1, "DAP-2695-A1",
- "D-Link DAP-2695 rev. A1",
- dap2695_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c
deleted file mode 100644
index f9f3f9e60d..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * D-Link DGL-5500 board support
- *
- * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DGL_5500_A1_GPIO_LED_POWER_ORANGE 14
-#define DGL_5500_A1_GPIO_LED_POWER_GREEN 19
-#define DGL_5500_A1_GPIO_LED_PLANET_GREEN 22
-#define DGL_5500_A1_GPIO_LED_PLANET_ORANGE 23
-
-#define DGL_5500_A1_GPIO_BTN_WPS 16
-#define DGL_5500_A1_GPIO_BTN_RESET 17
-
-#define DGL_5500_A1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL \
- (3 * DGL_5500_A1_KEYS_POLL_INTERVAL)
-
-#define DGL_5500_A1_WMAC_CALDATA_OFFSET 0x1000
-
-#define DGL_5500_A1_LAN_MAC_OFFSET 0x04
-#define DGL_5500_A1_WAN_MAC_OFFSET 0x16
-
-static struct gpio_led dgl_5500_a1_leds_gpio[] __initdata = {
- {
- .name = "d-link:green:power",
- .gpio = DGL_5500_A1_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- },
- {
- .name = "d-link:orange:power",
- .gpio = DGL_5500_A1_GPIO_LED_POWER_ORANGE,
- .active_low = 1,
- },
- {
- .name = "d-link:green:planet",
- .gpio = DGL_5500_A1_GPIO_LED_PLANET_GREEN,
- .active_low = 1,
- },
- {
- .name = "d-link:orange:planet",
- .gpio = DGL_5500_A1_GPIO_LED_PLANET_ORANGE,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button dgl_5500_a1_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DGL_5500_A1_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DGL_5500_A1_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg dgl_5500_a1_ar8327_pad0_cfg = {
- /* Use the SGMII interface for the GMAC0 of the AR8327 switch */
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data dgl_5500_a1_ar8327_data = {
- .pad0_cfg = &dgl_5500_a1_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info dgl_5500_a1_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &dgl_5500_a1_ar8327_data,
- },
-};
-
-static void __init dgl_5500_a1_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 lan_mac[ETH_ALEN];
-
- ath79_parse_ascii_mac(mac + DGL_5500_A1_LAN_MAC_OFFSET, lan_mac);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dgl_5500_a1_leds_gpio),
- dgl_5500_a1_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DGL_5500_A1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dgl_5500_a1_gpio_keys),
- dgl_5500_a1_gpio_keys);
-
- ath79_register_wmac(art + DGL_5500_A1_WMAC_CALDATA_OFFSET, lan_mac);
-
- ath79_register_mdio(0, 0x0);
- mdiobus_register_board_info(dgl_5500_a1_mdio0_info,
- ARRAY_SIZE(dgl_5500_a1_mdio0_info));
-
- ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
-
- /* GMAC1 is connected to an AR8327N switch via the SMGII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.phy_mask = BIT(0);
- ath79_eth1_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- ath79_register_eth(1);
-
- ath79_register_usb();
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_DGL_5500_A1, "DGL-5500-A1", "D-Link DGL-5500 rev. A1",
- dgl_5500_a1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c
deleted file mode 100644
index 275d2a29a0..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * D-Link DHP-1565 rev. A1 board support
- *
- * Copyright (C) 2014 Jacek Kikiewicz
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DHP1565A1_GPIO_LED_BLUE_USB 11
-#define DHP1565A1_GPIO_LED_AMBER_POWER 14
-#define DHP1565A1_GPIO_LED_BLUE_POWER 22
-#define DHP1565A1_GPIO_LED_BLUE_WPS 15
-#define DHP1565A1_GPIO_LED_AMBER_PLANET 19
-#define DHP1565A1_GPIO_LED_BLUE_PLANET 18
-#define DHP1565A1_GPIO_LED_WLAN_2G 13
-
-#define DHP1565A1_GPIO_WAN_LED_ENABLE 20
-
-#define DHP1565A1_GPIO_BTN_RESET 17
-#define DHP1565A1_GPIO_BTN_WPS 16
-
-#define DHP1565A1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DHP1565A1_KEYS_DEBOUNCE_INTERVAL (3 * DHP1565A1_KEYS_POLL_INTERVAL)
-
-#define DHP1565A1_MAC0_OFFSET 0xFFA0
-#define DHP1565A1_MAC1_OFFSET 0xFFB4
-#define DHP1565A1_WMAC0_OFFSET 0x5
-#define DHP1565A1_WMAC_CALDATA_OFFSET 0x1000
-#define DHP1565A1_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led dhp1565a1_leds_gpio[] __initdata = {
- {
- .name = "d-link:amber:power",
- .gpio = DHP1565A1_GPIO_LED_AMBER_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:green:power",
- .gpio = DHP1565A1_GPIO_LED_BLUE_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:amber:planet",
- .gpio = DHP1565A1_GPIO_LED_AMBER_PLANET,
- .active_low = 1,
- },
- {
- .name = "d-link:green:planet",
- .gpio = DHP1565A1_GPIO_LED_BLUE_PLANET,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button dhp1565a1_gpio_keys[] __initdata = {
- {
- .desc = "Soft reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DHP1565A1_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DHP1565A1_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg dhp1565a1_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data dhp1565a1_ar8327_data = {
- .pad0_cfg = &dhp1565a1_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info dhp1565a1_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &dhp1565a1_ar8327_data,
- },
-};
-
-static void __init dhp1565a1_generic_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
- u8 wmac0[ETH_ALEN];
-
- ath79_parse_ascii_mac(mac + DHP1565A1_MAC0_OFFSET, mac0);
- ath79_parse_ascii_mac(mac + DHP1565A1_MAC1_OFFSET, mac1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_gpio_keys_polled(-1, DHP1565A1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dhp1565a1_gpio_keys),
- dhp1565a1_gpio_keys);
-
- ath79_init_mac(wmac0, mac0, 0);
- ath79_register_wmac(art + DHP1565A1_WMAC_CALDATA_OFFSET, wmac0);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-
- mdiobus_register_board_info(dhp1565a1_mdio0_info,
- ARRAY_SIZE(dhp1565a1_mdio0_info));
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 1);
-
- /* GMAC0 is connected to an AR8327N switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-
- ath79_register_usb();
-}
-
-static void __init dhp1565a1_setup(void)
-{
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dhp1565a1_leds_gpio),
- dhp1565a1_leds_gpio);
-
- dhp1565a1_generic_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_DHP_1565_A1, "DHP-1565-A1",
- "D-Link DHP-1565 rev. A1",
- dhp1565a1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-505-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-505-a1.c
deleted file mode 100644
index 1367b64a8f..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-505-a1.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * DLink DIR-505 A1 board support
- *
- * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define DIR_505A1_GPIO_BTN_WPS 11 /* verify */
-#define DIR_505A1_GPIO_BTN_RESET 12 /* verify */
-
-#define DIR_505A1_GPIO_LED_RED 26 /* unused, fyi */
-#define DIR_505A1_GPIO_LED_GREEN 27
-
-#define DIR_505A1_GPIO_WAN_LED_ENABLE 1
-
-#define DIR_505A1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DIR_505A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_505A1_KEYS_POLL_INTERVAL)
-
-#define DIR_505A1_ART_ADDRESS 0x1f010000
-#define DIR_505A1_CALDATA_OFFSET 0x1000
-
-#define DIR_505A1_MAC_PART_ADDRESS 0x1f020000
-#define DIR_505A1_LAN_MAC_OFFSET 0x04
-#define DIR_505A1_WAN_MAC_OFFSET 0x16
-
-static struct gpio_led dir_505_a1_leds_gpio[] __initdata = {
- {
- .name = "d-link:green:power",
- .gpio = DIR_505A1_GPIO_LED_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:red:status",
- .gpio = DIR_505A1_GPIO_LED_RED,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button dir_505_a1_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_505A1_GPIO_BTN_RESET,
- .active_low = 0,
- }, {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR_505A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_505A1_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init dir_505_a1_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(DIR_505A1_ART_ADDRESS);
- u8 *mac = (u8 *) KSEG1ADDR(DIR_505A1_MAC_PART_ADDRESS);
- u8 lan_mac[ETH_ALEN];
- u8 wan_mac[ETH_ALEN];
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- gpio_request_one(DIR_505A1_GPIO_WAN_LED_ENABLE,
- GPIOF_OUT_INIT_LOW, "WAN LED enable");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_505_a1_leds_gpio),
- dir_505_a1_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, DIR_505A1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir_505_a1_gpio_keys),
- dir_505_a1_gpio_keys);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_usb();
-
- ath79_parse_ascii_mac(mac + DIR_505A1_LAN_MAC_OFFSET, lan_mac);
- ath79_parse_ascii_mac(mac + DIR_505A1_WAN_MAC_OFFSET, wan_mac);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_register_wmac(art + DIR_505A1_CALDATA_OFFSET, lan_mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_505_A1, "DIR-505-A1",
- "D-Link DIR-505 rev. A1", dir_505_a1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-600-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-600-a1.c
deleted file mode 100644
index 5e6134de7a..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-600-a1.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * D-Link DIR-600 rev. A1 board support
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define DIR_600_A1_GPIO_LED_WPS 0
-#define DIR_600_A1_GPIO_LED_POWER_AMBER 1
-#define DIR_600_A1_GPIO_LED_POWER_GREEN 6
-#define DIR_600_A1_GPIO_LED_LAN1 13
-#define DIR_600_A1_GPIO_LED_LAN2 14
-#define DIR_600_A1_GPIO_LED_LAN3 15
-#define DIR_600_A1_GPIO_LED_LAN4 16
-#define DIR_600_A1_GPIO_LED_WAN_AMBER 7
-#define DIR_600_A1_GPIO_LED_WAN_GREEN 17
-
-#define DIR_600_A1_GPIO_BTN_RESET 8
-#define DIR_600_A1_GPIO_BTN_WPS 12
-
-#define DIR_600_A1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DIR_600_A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_600_A1_KEYS_POLL_INTERVAL)
-
-#define DIR_600_A1_NVRAM_ADDR 0x1f030000
-#define DIR_600_A1_NVRAM_SIZE 0x10000
-
-static struct gpio_led dir_600_a1_leds_gpio[] __initdata = {
- {
- .name = "d-link:green:power",
- .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN,
- }, {
- .name = "d-link:amber:power",
- .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER,
- }, {
- .name = "d-link:amber:wan",
- .gpio = DIR_600_A1_GPIO_LED_WAN_AMBER,
- }, {
- .name = "d-link:green:wan",
- .gpio = DIR_600_A1_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan1",
- .gpio = DIR_600_A1_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan2",
- .gpio = DIR_600_A1_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan3",
- .gpio = DIR_600_A1_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "d-link:green:lan4",
- .gpio = DIR_600_A1_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "d-link:blue:wps",
- .gpio = DIR_600_A1_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dir_600_a1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_600_A1_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR_600_A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_600_A1_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init dir_600_a1_setup(void)
-{
- const char *nvram = (char *) KSEG1ADDR(DIR_600_A1_NVRAM_ADDR);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac_buff[6];
- u8 *mac = NULL;
-
- if (ath79_nvram_parse_mac_addr(nvram, DIR_600_A1_NVRAM_SIZE,
- "lan_mac=", mac_buff) == 0) {
- ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1);
- mac = mac_buff;
- }
-
- ath79_register_m25p80(NULL);
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
- dir_600_a1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DIR_600_A1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir_600_a1_gpio_keys),
- dir_600_a1_gpio_keys);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
-
- /* WAN port */
- ath79_register_eth(0);
-
- ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",
- dir_600_a1_setup);
-
-MIPS_MACHINE(ATH79_MACH_EBR_2310_C1, "EBR-2310-C1", "D-Link EBR-2310 rev. C1",
- dir_600_a1_setup);
-
-static void __init dir_615_e1_setup(void)
-{
- dir_600_a1_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_615_E1, "DIR-615-E1", "D-Link DIR-615 rev. E1",
- dir_615_e1_setup);
-
-static void __init dir_615_e4_setup(void)
-{
- dir_600_a1_setup();
- ap9x_pci_setup_wmac_led_pin(0, 1);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_615_E4, "DIR-615-E4", "D-Link DIR-615 rev. E4",
- dir_615_e4_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c
deleted file mode 100644
index e55a43f9c7..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-c1.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * D-Link DIR-615 rev C1 board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define DIR_615C1_GPIO_LED_ORANGE_STATUS 1 /* ORANGE:STATUS:TRICOLOR */
-#define DIR_615C1_GPIO_LED_BLUE_WPS 3 /* BLUE:WPS */
-#define DIR_615C1_GPIO_LED_GREEN_WAN 4 /* GREEN:WAN:TRICOLOR */
-#define DIR_615C1_GPIO_LED_GREEN_WANCPU 5 /* GREEN:WAN:CPU:TRICOLOR */
-#define DIR_615C1_GPIO_LED_GREEN_WLAN 6 /* GREEN:WLAN */
-#define DIR_615C1_GPIO_LED_GREEN_STATUS 14 /* GREEN:STATUS:TRICOLOR */
-#define DIR_615C1_GPIO_LED_ORANGE_WAN 15 /* ORANGE:WAN:TRICOLOR */
-
-/* buttons may need refinement */
-
-#define DIR_615C1_GPIO_BTN_WPS 12
-#define DIR_615C1_GPIO_BTN_RESET 21
-
-#define DIR_615C1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DIR_615C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615C1_KEYS_POLL_INTERVAL)
-
-#define DIR_615C1_CONFIG_ADDR 0x1f020000
-#define DIR_615C1_CONFIG_SIZE 0x10000
-
-#define DIR_615C1_WLAN_MAC_ADDR 0x1f3fffb4
-
-static struct gpio_led dir_615c1_leds_gpio[] __initdata = {
- {
- .name = "d-link:orange:status",
- .gpio = DIR_615C1_GPIO_LED_ORANGE_STATUS,
- .active_low = 1,
- }, {
- .name = "d-link:blue:wps",
- .gpio = DIR_615C1_GPIO_LED_BLUE_WPS,
- .active_low = 1,
- }, {
- .name = "d-link:green:wan",
- .gpio = DIR_615C1_GPIO_LED_GREEN_WAN,
- .active_low = 1,
- }, {
- .name = "d-link:green:wancpu",
- .gpio = DIR_615C1_GPIO_LED_GREEN_WANCPU,
- .active_low = 1,
- }, {
- .name = "d-link:green:wlan",
- .gpio = DIR_615C1_GPIO_LED_GREEN_WLAN,
- .active_low = 1,
- }, {
- .name = "d-link:green:status",
- .gpio = DIR_615C1_GPIO_LED_GREEN_STATUS,
- .active_low = 1,
- }, {
- .name = "d-link:orange:wan",
- .gpio = DIR_615C1_GPIO_LED_ORANGE_WAN,
- .active_low = 1,
- }
-
-};
-
-static struct gpio_keys_button dir_615c1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_615C1_GPIO_BTN_RESET,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR_615C1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_615C1_GPIO_BTN_WPS,
- }
-};
-
-#define DIR_615C1_LAN_PHYMASK BIT(0)
-#define DIR_615C1_WAN_PHYMASK BIT(4)
-#define DIR_615C1_MDIO_MASK (~(DIR_615C1_LAN_PHYMASK | \
- DIR_615C1_WAN_PHYMASK))
-
-static void __init dir_615c1_setup(void)
-{
- const char *config = (char *) KSEG1ADDR(DIR_615C1_CONFIG_ADDR);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac[ETH_ALEN], wlan_mac[ETH_ALEN];
-
- if (ath79_nvram_parse_mac_addr(config, DIR_615C1_CONFIG_SIZE,
- "lan_mac=", mac) == 0) {
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
- }
-
- ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615C1_WLAN_MAC_ADDR), wlan_mac);
-
- ath79_register_mdio(0, DIR_615C1_MDIO_MASK);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.phy_mask = DIR_615C1_LAN_PHYMASK;
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = DIR_615C1_WAN_PHYMASK;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615c1_leds_gpio),
- dir_615c1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DIR_615C1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir_615c1_gpio_keys),
- dir_615c1_gpio_keys);
-
- ath79_register_wmac(eeprom, wlan_mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1",
- dir_615c1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c
deleted file mode 100644
index 64fe438dcb..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-615-i1.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * D-Link DIR-615 rev. I1 board support
- * Copyright (C) 2013-2015 Jaehoon You <teslamint@gmail.com>
- *
- * based on the DIR-600 rev. A1 board support code
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2012 Vadim Girlin <vadimgirlin@gmail.com>
- *
- * based on the TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 board support code
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DIR_615_I1_GPIO_LED_WPS 15
-#define DIR_615_I1_GPIO_LED_POWER_AMBER 14
-#define DIR_615_I1_GPIO_LED_POWER_GREEN 4
-#define DIR_615_I1_GPIO_LED_WAN_AMBER 22
-#define DIR_615_I1_GPIO_LED_WAN_GREEN 12
-#define DIR_615_I1_GPIO_LED_WLAN_GREEN 13
-
-#define DIR_615_I1_GPIO_BTN_WPS 16
-#define DIR_615_I1_GPIO_BTN_RESET 17
-
-#define DIR_615_I1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DIR_615_I1_KEYS_DEBOUNCE_INTERVAL (3 * DIR_615_I1_KEYS_POLL_INTERVAL)
-
-#define DIR_615_I1_LAN_PHYMASK BIT(0)
-#define DIR_615_I1_WAN_PHYMASK BIT(4)
-#define DIR_615_I1_WLAN_MAC_ADDR 0x1fffffb4
-
-static struct gpio_led dir_615_i1_leds_gpio[] __initdata = {
- {
- .name = "d-link:green:power",
- .gpio = DIR_615_I1_GPIO_LED_POWER_GREEN,
- }, {
- .name = "d-link:amber:power",
- .gpio = DIR_615_I1_GPIO_LED_POWER_AMBER,
- }, {
- .name = "d-link:amber:wan",
- .gpio = DIR_615_I1_GPIO_LED_WAN_AMBER,
- }, {
- .name = "d-link:green:wan",
- .gpio = DIR_615_I1_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:green:wlan",
- .gpio = DIR_615_I1_GPIO_LED_WLAN_GREEN,
- .active_low = 1,
- }, {
- .name = "d-link:blue:wps",
- .gpio = DIR_615_I1_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dir_615_i1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_615_I1_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR_615_I1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR_615_I1_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init dir_615_i1_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac[ETH_ALEN];
-
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, ~(DIR_615_I1_WAN_PHYMASK));
-
- ath79_parse_ascii_mac((char *) KSEG1ADDR(DIR_615_I1_WLAN_MAC_ADDR), mac);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-
- /* GMAC0 is connected to the PHY0 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = DIR_615_I1_WAN_PHYMASK;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_mask = DIR_615_I1_LAN_PHYMASK;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(NULL);
-
- /* Disable JTAG, enabling GPIOs 0-3 */
- /* Configure OBS4 line, for GPIO 4*/
- ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
- AR934X_GPIO_FUNC_CLK_OBS4_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir_615_i1_leds_gpio),
- dir_615_i1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DIR_615_I1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir_615_i1_gpio_keys),
- dir_615_i1_gpio_keys);
-
- ath79_register_wmac(eeprom, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_615_I1, "DIR-615-I1", "D-Link DIR-615 rev. I1",
- dir_615_i1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c
deleted file mode 100644
index 9b82990b13..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-b1.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * D-Link DIR-825 rev. B1 board support
- *
- * Copyright (C) 2009-2011 Lukas Kuna, Evkanet, s.r.o.
- *
- * based on mach-wndr3700.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define DIR825B1_GPIO_LED_BLUE_USB 0
-#define DIR825B1_GPIO_LED_ORANGE_POWER 1
-#define DIR825B1_GPIO_LED_BLUE_POWER 2
-#define DIR825B1_GPIO_LED_BLUE_WPS 4
-#define DIR825B1_GPIO_LED_ORANGE_PLANET 6
-#define DIR825B1_GPIO_LED_BLUE_PLANET 11
-
-#define DIR825B1_GPIO_BTN_RESET 3
-#define DIR825B1_GPIO_BTN_WPS 8
-
-#define DIR825B1_GPIO_RTL8366_SDA 5
-#define DIR825B1_GPIO_RTL8366_SCK 7
-
-#define DIR825B1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DIR825B1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825B1_KEYS_POLL_INTERVAL)
-
-#define DIR825B1_CAL0_OFFSET 0x1000
-#define DIR825B1_CAL1_OFFSET 0x5000
-#define DIR825B1_MAC0_OFFSET 0xffa0
-#define DIR825B1_MAC1_OFFSET 0xffb4
-
-#define DIR825B1_CAL_LOCATION_0 0x1f660000
-#define DIR825B1_CAL_LOCATION_1 0x1f7f0000
-
-static struct gpio_led dir825b1_leds_gpio[] __initdata = {
- {
- .name = "d-link:blue:usb",
- .gpio = DIR825B1_GPIO_LED_BLUE_USB,
- .active_low = 1,
- }, {
- .name = "d-link:orange:power",
- .gpio = DIR825B1_GPIO_LED_ORANGE_POWER,
- .active_low = 1,
- }, {
- .name = "d-link:blue:power",
- .gpio = DIR825B1_GPIO_LED_BLUE_POWER,
- .active_low = 1,
- }, {
- .name = "d-link:blue:wps",
- .gpio = DIR825B1_GPIO_LED_BLUE_WPS,
- .active_low = 1,
- }, {
- .name = "d-link:orange:planet",
- .gpio = DIR825B1_GPIO_LED_ORANGE_PLANET,
- .active_low = 1,
- }, {
- .name = "d-link:blue:planet",
- .gpio = DIR825B1_GPIO_LED_BLUE_PLANET,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dir825b1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR825B1_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR825B1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR825B1_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static struct rtl8366_initval dir825b1_rtl8366s_initvals[] = {
- { .reg = 0x06, .val = 0x0108 },
-};
-
-static struct rtl8366_platform_data dir825b1_rtl8366s_data = {
- .gpio_sda = DIR825B1_GPIO_RTL8366_SDA,
- .gpio_sck = DIR825B1_GPIO_RTL8366_SCK,
- .num_initvals = ARRAY_SIZE(dir825b1_rtl8366s_initvals),
- .initvals = dir825b1_rtl8366s_initvals,
-};
-
-static struct platform_device dir825b1_rtl8366s_device = {
- .name = RTL8366S_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &dir825b1_rtl8366s_data,
- }
-};
-
-static bool __init dir825b1_is_caldata_valid(u8 *p)
-{
- u16 *magic0, *magic1;
-
- magic0 = (u16 *)(p + DIR825B1_CAL0_OFFSET);
- magic1 = (u16 *)(p + DIR825B1_CAL1_OFFSET);
-
- return (*magic0 == 0xa55a && *magic1 == 0xa55a);
-}
-
-static void __init dir825b1_wlan_init(void)
-{
- u8 *caldata;
- u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
- u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN];
-
- caldata = (u8 *) KSEG1ADDR(DIR825B1_CAL_LOCATION_0);
- if (!dir825b1_is_caldata_valid(caldata)) {
- caldata = (u8 *)KSEG1ADDR(DIR825B1_CAL_LOCATION_1);
- if (!dir825b1_is_caldata_valid(caldata)) {
- pr_err("no calibration data found\n");
- return;
- }
- }
-
- ath79_parse_ascii_mac(caldata + DIR825B1_MAC0_OFFSET, mac0);
- ath79_parse_ascii_mac(caldata + DIR825B1_MAC1_OFFSET, mac1);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 0);
- ath79_init_mac(wmac0, mac0, 0);
- ath79_init_mac(wmac1, mac1, 1);
-
- ap9x_pci_setup_wmac_led_pin(0, 5);
- ap9x_pci_setup_wmac_led_pin(1, 5);
-
- ap94_pci_init(caldata + DIR825B1_CAL0_OFFSET, wmac0,
- caldata + DIR825B1_CAL1_OFFSET, wmac1);
-}
-
-static void __init dir825b1_setup(void)
-{
- dir825b1_wlan_init();
-
- ath79_register_mdio(0, 0x0);
-
- ath79_eth0_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_pll_data.pll_1000 = 0x11110000;
-
- ath79_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = 0x10;
- ath79_eth1_pll_data.pll_1000 = 0x11110000;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825b1_leds_gpio),
- dir825b1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DIR825B1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir825b1_gpio_keys),
- dir825b1_gpio_keys);
-
- ath79_register_usb();
-
- platform_device_register(&dir825b1_rtl8366s_device);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_825_B1, "DIR-825-B1", "D-Link DIR-825 rev. B1",
- dir825b1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c
deleted file mode 100644
index 0d586c27e4..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-825-c1.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * D-Link DIR-825 rev. C1 board support
- *
- * Copyright (C) 2013 Alexander Stadler
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DIR825C1_GPIO_LED_BLUE_USB 11
-#define DIR825C1_GPIO_LED_AMBER_POWER 14
-#define DIR825C1_GPIO_LED_BLUE_POWER 22
-#define DIR825C1_GPIO_LED_BLUE_WPS 15
-#define DIR825C1_GPIO_LED_AMBER_PLANET 19
-#define DIR825C1_GPIO_LED_BLUE_PLANET 18
-#define DIR825C1_GPIO_LED_WLAN_2G 13
-
-#define DIR825C1_GPIO_WAN_LED_ENABLE 20
-
-#define DIR825C1_GPIO_BTN_RESET 17
-#define DIR825C1_GPIO_BTN_WPS 16
-
-#define DIR825C1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DIR825C1_KEYS_DEBOUNCE_INTERVAL (3 * DIR825C1_KEYS_POLL_INTERVAL)
-
-#define DIR825C1_MAC0_OFFSET 0x4
-#define DIR825C1_MAC1_OFFSET 0x18
-#define DIR825C1_WMAC_CALDATA_OFFSET 0x1000
-#define DIR825C1_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led dir825c1_leds_gpio[] __initdata = {
- {
- .name = "d-link:blue:usb",
- .gpio = DIR825C1_GPIO_LED_BLUE_USB,
- .active_low = 1,
- },
- {
- .name = "d-link:amber:power",
- .gpio = DIR825C1_GPIO_LED_AMBER_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:blue:power",
- .gpio = DIR825C1_GPIO_LED_BLUE_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:blue:wps",
- .gpio = DIR825C1_GPIO_LED_BLUE_WPS,
- .active_low = 1,
- },
- {
- .name = "d-link:amber:planet",
- .gpio = DIR825C1_GPIO_LED_AMBER_PLANET,
- .active_low = 1,
- },
- {
- .name = "d-link:blue:wlan2g",
- .gpio = DIR825C1_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
-};
-
-static struct gpio_led dir835a1_leds_gpio[] __initdata = {
- {
- .name = "d-link:amber:power",
- .gpio = DIR825C1_GPIO_LED_AMBER_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:green:power",
- .gpio = DIR825C1_GPIO_LED_BLUE_POWER,
- .active_low = 1,
- },
- {
- .name = "d-link:blue:wps",
- .gpio = DIR825C1_GPIO_LED_BLUE_WPS,
- .active_low = 1,
- },
- {
- .name = "d-link:amber:planet",
- .gpio = DIR825C1_GPIO_LED_AMBER_PLANET,
- .active_low = 1,
- },
- {
- .name = "d-link:green:planet",
- .gpio = DIR825C1_GPIO_LED_BLUE_PLANET,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button dir825c1_gpio_keys[] __initdata = {
- {
- .desc = "Soft reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR825C1_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR825C1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR825C1_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg dir825c1_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_led_cfg dir825c1_ar8327_led_cfg = {
- .led_ctrl0 = 0x00000000,
- .led_ctrl1 = 0xc737c737,
- .led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x00c30c00,
- .open_drain = true,
-};
-
-static struct ar8327_platform_data dir825c1_ar8327_data = {
- .pad0_cfg = &dir825c1_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &dir825c1_ar8327_led_cfg,
-};
-
-static struct mdio_board_info dir825c1_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &dir825c1_ar8327_data,
- },
-};
-
-static void __init dir825c1_generic_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
- u8 wmac0[ETH_ALEN], wmac1[ETH_ALEN];
-
- ath79_parse_ascii_mac(mac + DIR825C1_MAC0_OFFSET, mac0);
- ath79_parse_ascii_mac(mac + DIR825C1_MAC1_OFFSET, mac1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_gpio_keys_polled(-1, DIR825C1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir825c1_gpio_keys),
- dir825c1_gpio_keys);
-
- ath79_init_mac(wmac0, mac0, 0);
- ath79_register_wmac(art + DIR825C1_WMAC_CALDATA_OFFSET, wmac0);
-
- ath79_init_mac(wmac1, mac1, 1);
- ap91_pci_init(art + DIR825C1_PCIE_CALDATA_OFFSET, wmac1);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-
- mdiobus_register_board_info(dir825c1_mdio0_info,
- ARRAY_SIZE(dir825c1_mdio0_info));
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
-
- /* GMAC0 is connected to an AR8327N switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-
- ath79_register_usb();
-}
-
-static void __init dir825c1_setup(void)
-{
- ath79_gpio_output_select(DIR825C1_GPIO_LED_BLUE_USB,
- AR934X_GPIO_OUT_GPIO);
-
- gpio_request_one(DIR825C1_GPIO_WAN_LED_ENABLE,
- GPIOF_OUT_INIT_LOW, "WAN LED enable");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir825c1_leds_gpio),
- dir825c1_leds_gpio);
-
- ap9x_pci_setup_wmac_led_pin(0, 0);
-
- dir825c1_generic_setup();
-}
-
-static void __init dir835a1_setup(void)
-{
- dir825c1_ar8327_data.led_cfg = NULL;
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir835a1_leds_gpio),
- dir835a1_leds_gpio);
-
- dir825c1_generic_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_825_C1, "DIR-825-C1",
- "D-Link DIR-825 rev. C1",
- dir825c1_setup);
-
-MIPS_MACHINE(ATH79_MACH_DIR_835_A1, "DIR-835-A1",
- "D-Link DIR-835 rev. A1",
- dir835a1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-869-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-869-a1.c
deleted file mode 100644
index 3841c3d5d5..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dir-869-a1.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * D-Link DIR-869 A1 support
- *
- * Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
- * Copyright (C) 2016 Matthias Schiffer <mschiffer@universe-factory.net>
- *
- * Derived from: mach-ubnt-unifiac.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/irq.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include <linux/platform_data/phy-at803x.h>
-#include <linux/ar8216_platform.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-
-#define DIR869A1_GPIO_BTN_RESET 1
-#define DIR869A1_GPIO_BTN_WPS 2
-#define DIR869A1_GPIO_SWITCH_MODE 8
-
-#define DIR869A1_GPIO_ENABLE_SWITCH 11
-
-#define DIR869A1_GPIO_LED_ORANGE 15
-#define DIR869A1_GPIO_LED_WHITE 16
-
-#define DIR869A1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DIR869A1_KEYS_DEBOUNCE_INTERVAL (3 * DIR869A1_KEYS_POLL_INTERVAL)
-
-
-#define DIR869A1_DEVDATA_ADDR 0x1f050000
-#define DIR869A1_DEVDATA_SIZE 0x10000
-
-#define DIR869A1_EEPROM_ADDR 0x1fff0000
-#define DIR869A1_WMAC_CALDATA_OFFSET 0x1000
-#define DIR869A1_PCI_CALDATA_OFFSET 0x5000
-
-
-static struct gpio_led dir869a1_leds_gpio[] __initdata = {
- {
- .name = "d-link:white:status",
- .gpio = DIR869A1_GPIO_LED_WHITE,
- .active_low = 1,
- },
- {
- .name = "d-link:orange:status",
- .gpio = DIR869A1_GPIO_LED_ORANGE,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button dir869a1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DIR869A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR869A1_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DIR869A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR869A1_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "mode",
- .type = EV_SW,
- .code = BTN_0,
- .debounce_interval = DIR869A1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DIR869A1_GPIO_SWITCH_MODE,
- .active_low = 0,
- },
-};
-
-
-static struct ar8327_pad_cfg dir869a1_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data dir869a1_ar8327_data = {
- .pad0_cfg = &dir869a1_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-
-static struct mdio_board_info dir869a1_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &dir869a1_ar8327_data,
- },
-};
-
-
-static void dir869a1_get_mac(const char *name, char *mac)
-{
- u8 *nvram = (u8 *) KSEG1ADDR(DIR869A1_DEVDATA_ADDR);
- int err;
-
- err = ath79_nvram_parse_mac_addr(nvram, DIR869A1_DEVDATA_SIZE,
- name, mac);
- if (err)
- pr_err("no MAC address found for %s\n", name);
-}
-
-static void __init dir869a1_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(DIR869A1_EEPROM_ADDR);
- u8 wlan24mac[ETH_ALEN] = {}, wlan5mac[ETH_ALEN] = {};
-
- ath79_register_m25p80(NULL);
-
- gpio_request_one(DIR869A1_GPIO_ENABLE_SWITCH,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "Switch power");
-
- dir869a1_get_mac("lanmac=", ath79_eth0_data.mac_addr);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_mask = BIT(0);
-
- mdiobus_register_board_info(dir869a1_mdio0_info,
- ARRAY_SIZE(dir869a1_mdio0_info));
-
- ath79_register_mdio(0, 0);
- ath79_register_eth(0);
-
- dir869a1_get_mac("wlan24mac=", wlan24mac);
- ath79_register_wmac(eeprom + DIR869A1_WMAC_CALDATA_OFFSET, wlan24mac);
-
- dir869a1_get_mac("wlan5mac=", wlan5mac);
- ap91_pci_init(eeprom + DIR869A1_PCI_CALDATA_OFFSET, wlan5mac);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dir869a1_leds_gpio),
- dir869a1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DIR869A1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dir869a1_gpio_keys),
- dir869a1_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_DIR_869_A1, "DIR-869-A1", "D-Link DIR-869 rev. A1",
- dir869a1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-hotspot.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-hotspot.c
deleted file mode 100644
index 3ae46514fc..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-hotspot.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * devolo dLAN Hotspot board support
- *
- * Copyright (C) 2015 Torsten Schnuis <torsten.schnuis@gik.de>
- * Copyright (C) 2015 devolo AG
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DLAN_HOTSPOT_GPIO_LED_WIFI 0
-
-#define DLAN_HOTSPOT_GPIO_BTN_RESET 11
-#define DLAN_HOTSPOT_GPIO_BTN_PLC_PAIRING 12
-#define DLAN_HOTSPOT_GPIO_BTN_WIFI 21
-
-#define DLAN_HOTSPOT_GPIO_PLC_POWER 22
-#define DLAN_HOTSPOT_GPIO_PLC_RESET 20
-#define DLAN_HOTSPOT_GPIO_PLC_DISABLE_LEDS 18
-
-#define DLAN_HOTSPOT_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DLAN_HOTSPOT_KEYS_DEBOUNCE_INTERVAL (3 * DLAN_HOTSPOT_KEYS_POLL_INTERVAL)
-
-#define DLAN_HOTSPOT_ART_ADDRESS 0x1fff0000
-#define DLAN_HOTSPOT_CALDATA_OFFSET 0x00001000
-#define DLAN_HOTSPOT_MAC_ADDRESS_OFFSET 0x00001002
-
-static struct gpio_led dlan_hotspot_leds_gpio[] __initdata = {
- {
- .name = "devolo:green:wifi",
- .gpio = DLAN_HOTSPOT_GPIO_LED_WIFI,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button dlan_hotspot_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DLAN_HOTSPOT_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DLAN_HOTSPOT_GPIO_BTN_RESET,
- .active_low = 0,
- },
- {
- .desc = "Pairing button",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = DLAN_HOTSPOT_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DLAN_HOTSPOT_GPIO_BTN_PLC_PAIRING,
- .active_low = 0,
- },
- {
- .desc = "WLAN button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DLAN_HOTSPOT_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DLAN_HOTSPOT_GPIO_BTN_WIFI,
- .active_low = 0,
- }
-};
-
-static void __init dlan_hotspot_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(DLAN_HOTSPOT_ART_ADDRESS);
- u8 *cal = art + DLAN_HOTSPOT_CALDATA_OFFSET;
- u8 *wifi_mac = art + DLAN_HOTSPOT_MAC_ADDRESS_OFFSET;
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_hotspot_leds_gpio),
- dlan_hotspot_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DLAN_HOTSPOT_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dlan_hotspot_gpio_keys),
- dlan_hotspot_gpio_keys);
-
- gpio_request_one(DLAN_HOTSPOT_GPIO_PLC_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "PLC power");
- gpio_request_one(DLAN_HOTSPOT_GPIO_PLC_RESET,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "PLC reset");
- gpio_request_one(DLAN_HOTSPOT_GPIO_PLC_DISABLE_LEDS,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "PLC LEDs");
-
- ath79_register_usb();
-
- ath79_register_m25p80(NULL);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, 2);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_wmac(cal, wifi_mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_DLAN_HOTSPOT, "dLAN-Hotspot",
- "dLAN Hotspot", dlan_hotspot_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c
deleted file mode 100644
index 2100a9608d..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-1200-ac.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * devolo dLAN pro 500 Wireless+ support
- *
- * Copyright (c) 2013-2015 devolo AG
- * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-nfc.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DLAN_PRO_1200_AC_GPIO_DLAN_POWER_ENABLE 13
-#define DLAN_PRO_1200_AC_GPIO_WLAN_POWER_ENABLE 21
-#define DLAN_PRO_1200_AC_GPIO_LED_WLAN 12
-#define DLAN_PRO_1200_AC_GPIO_LED_DLAN 14
-#define DLAN_PRO_1200_AC_GPIO_LED_DLAN_ERR 15
-
-#define DLAN_PRO_1200_AC_GPIO_BTN_WLAN 20
-#define DLAN_PRO_1200_AC_GPIO_BTN_DLAN 22
-#define DLAN_PRO_1200_AC_GPIO_BTN_RESET 4
-#define DLAN_PRO_1200_AC_GPIO_DLAN_IND 17
-#define DLAN_PRO_1200_AC_GPIO_DLAN_ERR_IND 16
-
-#define DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL (3 * DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL)
-
-#define DLAN_PRO_1200_AC_ART_ADDRESS 0x1fff0000
-#define DLAN_PRO_1200_AC_CALDATA_OFFSET 0x1000
-#define DLAN_PRO_1200_AC_WIFIMAC_OFFSET 0x1002
-#define DLAN_PRO_1200_AC_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led dlan_pro_1200_ac_leds_gpio[] __initdata = {
- {
- .name = "devolo:status:wlan",
- .gpio = DLAN_PRO_1200_AC_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "devolo:status:dlan",
- .gpio = DLAN_PRO_1200_AC_GPIO_LED_DLAN,
- .active_low = 1,
- },
- {
- .name = "devolo:error:dlan",
- .gpio = DLAN_PRO_1200_AC_GPIO_LED_DLAN_ERR,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button dlan_pro_1200_ac_gpio_keys[] __initdata = {
- {
- .desc = "dLAN button",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DLAN_PRO_1200_AC_GPIO_BTN_DLAN,
- .active_low = 1,
- },
- {
- .desc = "WLAN button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DLAN_PRO_1200_AC_GPIO_BTN_WLAN,
- .active_low = 0,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DLAN_PRO_1200_AC_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DLAN_PRO_1200_AC_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct ar8327_pad_cfg dlan_pro_1200_ac_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = false,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
- .mac06_exchange_dis = true,
-};
-
-static struct ar8327_pad_cfg dlan_pro_1200_ac_ar8327_pad5_cfg = {
- .mode = 0,
- .txclk_delay_en = 0,
- .rxclk_delay_en = 0,
- .txclk_delay_sel = 0,
- .rxclk_delay_sel = 0,
-};
-
-static struct ar8327_platform_data dlan_pro_1200_ac_ar8327_data = {
- .pad0_cfg = &dlan_pro_1200_ac_ar8327_pad0_cfg,
- .pad5_cfg = &dlan_pro_1200_ac_ar8327_pad5_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info dlan_pro_1200_ac_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &dlan_pro_1200_ac_ar8327_data,
- },
-};
-
-static void __init dlan_pro_1200_ac_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(DLAN_PRO_1200_AC_ART_ADDRESS);
- u8 *cal = art + DLAN_PRO_1200_AC_CALDATA_OFFSET;
- u8 *wifi_mac = art + DLAN_PRO_1200_AC_WIFIMAC_OFFSET;
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_pro_1200_ac_leds_gpio),
- dlan_pro_1200_ac_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DLAN_PRO_1200_AC_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dlan_pro_1200_ac_gpio_keys),
- dlan_pro_1200_ac_gpio_keys);
-
- /* dLAN power must be enabled from user-space as soon as the boot-from-host daemon is running */
- gpio_request_one(DLAN_PRO_1200_AC_GPIO_DLAN_POWER_ENABLE,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "dLAN power");
-
- /* WLAN power is turned on initially to allow the PCI bus scan to succeed */
- gpio_request_one(DLAN_PRO_1200_AC_GPIO_WLAN_POWER_ENABLE,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "WLAN power");
-
- ath79_register_wmac(cal, wifi_mac);
- ap91_pci_init(art + DLAN_PRO_1200_AC_PCIE_CALDATA_OFFSET, NULL);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 | AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(1, 0x0);
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 2);
-
- mdiobus_register_board_info(dlan_pro_1200_ac_mdio0_info,
- ARRAY_SIZE(dlan_pro_1200_ac_mdio0_info));
-
- /* GMAC0 is connected to an AR8337 */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x02000000;
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_DLAN_PRO_1200_AC, "dLAN-pro-1200-ac", "devolo dLAN pro 1200+ WiFi ac",
- dlan_pro_1200_ac_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c
deleted file mode 100644
index 931eafffcb..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dlan-pro-500-wp.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * devolo dLAN pro 500 Wireless+ support
- *
- * Copyright (c) 2013-2015 devolo AG
- * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DLAN_PRO_500_WP_GPIO_DLAN_POWER_ENABLE 13
-#define DLAN_PRO_500_WP_GPIO_DLAN_LED_ENABLE 17
-#define DLAN_PRO_500_WP_GPIO_LED_WLAN_5G 11
-#define DLAN_PRO_500_WP_GPIO_LED_WLAN_2G 12
-#define DLAN_PRO_500_WP_GPIO_LED_STATUS 16
-#define DLAN_PRO_500_WP_GPIO_LED_ETH 14
-
-#define DLAN_PRO_500_WP_GPIO_BTN_WPS 20
-#define DLAN_PRO_500_WP_GPIO_BTN_WLAN 22
-#define DLAN_PRO_500_WP_GPIO_BTN_DLAN 21
-#define DLAN_PRO_500_WP_GPIO_BTN_RESET 4
-
-#define DLAN_PRO_500_WP_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL (3 * DLAN_PRO_500_WP_KEYS_POLL_INTERVAL)
-
-#define DLAN_PRO_500_WP_ART_ADDRESS 0x1fff0000
-#define DLAN_PRO_500_WP_CALDATA_OFFSET 0x1000
-#define DLAN_PRO_500_WP_MAC_ADDRESS_OFFSET 0x1002
-#define DLAN_PRO_500_WP_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led dlan_pro_500_wp_leds_gpio[] __initdata = {
- {
- .name = "devolo:green:status",
- .gpio = DLAN_PRO_500_WP_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "devolo:green:eth",
- .gpio = DLAN_PRO_500_WP_GPIO_LED_ETH,
- .active_low = 1,
- },
- {
- .name = "devolo:blue:wlan-5g",
- .gpio = DLAN_PRO_500_WP_GPIO_LED_WLAN_5G,
- .active_low = 1,
- },
- {
- .name = "devolo:green:wlan-2g",
- .gpio = DLAN_PRO_500_WP_GPIO_LED_WLAN_2G,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dlan_pro_500_wp_gpio_keys[] __initdata = {
- {
- .desc = "dLAN button",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DLAN_PRO_500_WP_GPIO_BTN_DLAN,
- .active_low = 0,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DLAN_PRO_500_WP_GPIO_BTN_WPS,
- .active_low = 0,
- },
- {
- .desc = "WLAN button",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DLAN_PRO_500_WP_GPIO_BTN_WLAN,
- .active_low = 1,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DLAN_PRO_500_WP_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DLAN_PRO_500_WP_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct ar8327_pad_cfg dlan_pro_500_wp_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_PHY_RGMII,
- .txclk_delay_en = false,
- .rxclk_delay_en = false,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL0,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
-};
-
-static struct ar8327_led_cfg dlan_pro_500_wp_ar8327_led_cfg = {
- .led_ctrl0 = 0x00000000,
- .led_ctrl1 = 0xc737c737,
- .led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x00c30c00,
- .open_drain = true,
-};
-
-static struct ar8327_platform_data dlan_pro_500_wp_ar8327_data = {
- .pad0_cfg = &dlan_pro_500_wp_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 0,
- .rxpause = 0,
- },
- .led_cfg = &dlan_pro_500_wp_ar8327_led_cfg,
-};
-
-static struct mdio_board_info dlan_pro_500_wp_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &dlan_pro_500_wp_ar8327_data,
- },
-};
-
-static void __init dlan_pro_500_wp_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(DLAN_PRO_500_WP_ART_ADDRESS);
- u8 *cal = art + DLAN_PRO_500_WP_CALDATA_OFFSET;
- u8 *wifi_mac = art + DLAN_PRO_500_WP_MAC_ADDRESS_OFFSET;
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dlan_pro_500_wp_leds_gpio),
- dlan_pro_500_wp_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DLAN_PRO_500_WP_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dlan_pro_500_wp_gpio_keys),
- dlan_pro_500_wp_gpio_keys);
-
- gpio_request_one(DLAN_PRO_500_WP_GPIO_DLAN_POWER_ENABLE,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "PLC power");
- gpio_request_one(DLAN_PRO_500_WP_GPIO_DLAN_LED_ENABLE,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "PLC LEDs");
-
- ath79_register_wmac(cal, wifi_mac);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-
- ath79_register_mdio(1, 0x0);
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(dlan_pro_500_wp_mdio0_info,
- ARRAY_SIZE(dlan_pro_500_wp_mdio0_info));
-
- /* GMAC0 is connected to a AR7400 PLC in PHY mode */
- ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, 2);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_pll_data.pll_1000 = 0x0e000000;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the internal switch */
- ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_DLAN_PRO_500_WP, "dLAN-pro-500-wp", "devolo dLAN pro 500 Wireless+",
- dlan_pro_500_wp_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-domywifi-dw33d.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-domywifi-dw33d.c
deleted file mode 100644
index ac4aa8eadf..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-domywifi-dw33d.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * DomyWifi DW33D support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/version.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-#include <linux/mtd/mtd.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/platform/ar934x_nfc.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DW33D_GPIO_LED_MMC 4
-#define DW33D_GPIO_LED_WLAN_2G 13
-#define DW33D_GPIO_LED_STATUS 14
-#define DW33D_GPIO_LED_USB 15
-#define DW33D_GPIO_LED_INTERNET 22
-
-#define DW33D_GPIO_BTN_RESET 17
-
-#define DW33D_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DW33D_KEYS_DEBOUNCE_INTERVAL (3 * DW33D_KEYS_POLL_INTERVAL)
-
-#define DW33D_MAC0_OFFSET 0
-#define DW33D_MAC1_OFFSET 6
-#define DW33D_WMAC_OFFSET 12
-#define DW33D_WMAC_CALDATA_OFFSET 0x1000
-#define DW33D_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led dw33d_leds_gpio[] __initdata = {
- {
- .name = "dw33d:blue:status",
- .gpio = DW33D_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "dw33d:blue:mmc",
- .gpio = DW33D_GPIO_LED_MMC,
- .active_low = 1,
- },
- {
- .name = "dw33d:blue:usb",
- .gpio = DW33D_GPIO_LED_USB,
- .active_low = 1,
- },
- {
- .name = "dw33d:blue:wlan-2g",
- .gpio = DW33D_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
- .name = "dw33d:blue:internet",
- .gpio = DW33D_GPIO_LED_INTERNET,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dw33d_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DW33D_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DW33D_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-/* GMAC6 of the QCA8337 switch is connected to the QCA9558 SoC via SGMII */
-static struct ar8327_pad_cfg dw33d_qca8337_pad6_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-/* GMAC0 of the QCA8337 switch is connected to the QCA9558 SoC via RGMII */
-static struct ar8327_pad_cfg dw33d_qca8337_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data dw33d_qca8337_data = {
- .pad0_cfg = &dw33d_qca8337_pad0_cfg,
- .pad6_cfg = &dw33d_qca8337_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info dw33d_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &dw33d_qca8337_data,
- },
-};
-
-static void __init dw33d_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dw33d_leds_gpio),
- dw33d_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DW33D_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dw33d_gpio_keys),
- dw33d_gpio_keys);
-
- ath79_register_usb();
- ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
- ath79_register_nfc();
- ath79_register_pci();
-
- ath79_register_wmac(art + DW33D_WMAC_CALDATA_OFFSET, art + DW33D_WMAC_OFFSET);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + DW33D_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art + DW33D_MAC1_OFFSET, 0);
-
- mdiobus_register_board_info(dw33d_mdio0_info,
- ARRAY_SIZE(dw33d_mdio0_info));
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x56000000;
-
- ath79_register_eth(0);
-
- /* GMAC1 is connected tot eh SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_DOMYWIFI_DW33D, "DW33D",
- "DomyWifi DW33D",
- dw33d_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c
deleted file mode 100644
index 888c9c949f..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dr344.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * Wallys DR342/DR344 boards support
- *
- * Copyright (c) 2011 Qualcomm Atheros
- * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2015 Philippe Duchein <wireless-dev@duchein.net>
- * Copyright (c) 2017 Piotr Dymacz <pepe2k@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/gpio.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-usb.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DR34X_GPIO_LED_SIG1 12
-#define DR34X_GPIO_LED_SIG2 13
-#define DR34X_GPIO_LED_SIG3 14
-#define DR34X_GPIO_LED_SIG4 15
-#define DR34X_GPIO_LED_STATUS 11
-#define DR344_GPIO_LED_LAN 17
-#define DR344_GPIO_EXTERNAL_LNA0 18
-#define DR344_GPIO_EXTERNAL_LNA1 19
-
-#define DR34X_GPIO_BTN_RESET 16
-
-#define DR344_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DR344_KEYS_DEBOUNCE_INTERVAL (3 * DR344_KEYS_POLL_INTERVAL)
-
-#define DR34X_MAC0_OFFSET 0
-#define DR34X_MAC1_OFFSET 8
-#define DR34X_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led dr342_leds_gpio[] __initdata = {
- {
- .name = "dr342:green:status",
- .gpio = DR34X_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "dr342:green:sig1",
- .gpio = DR34X_GPIO_LED_SIG1,
- .active_low = 1,
- },
- {
- .name = "dr342:green:sig2",
- .gpio = DR34X_GPIO_LED_SIG2,
- .active_low = 1,
- },
- {
- .name = "dr342:green:sig3",
- .gpio = DR34X_GPIO_LED_SIG3,
- .active_low = 1,
- },
- {
- .name = "dr342:green:sig4",
- .gpio = DR34X_GPIO_LED_SIG4,
- .active_low = 1,
- }
-};
-
-static struct gpio_led dr344_leds_gpio[] __initdata = {
- {
- .name = "dr344:green:lan",
- .gpio = DR344_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "dr344:green:status",
- .gpio = DR34X_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "dr344:green:sig1",
- .gpio = DR34X_GPIO_LED_SIG1,
- .active_low = 1,
- },
- {
- .name = "dr344:green:sig2",
- .gpio = DR34X_GPIO_LED_SIG2,
- .active_low = 1,
- },
- {
- .name = "dr344:green:sig3",
- .gpio = DR34X_GPIO_LED_SIG3,
- .active_low = 1,
- },
- {
- .name = "dr344:green:sig4",
- .gpio = DR34X_GPIO_LED_SIG4,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button dr34x_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DR344_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DR34X_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct at803x_platform_data dr34x_at803x_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 1,
- .enable_rgmii_tx_delay = 1,
-};
-
-static struct mdio_board_info dr34x_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &dr34x_at803x_data,
- },
-};
-
-static void __init dr34x_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1f03f810);
-
- ath79_register_m25p80(NULL);
-
- ath79_gpio_direction_select(DR34X_GPIO_LED_STATUS, true);
- gpio_set_value(DR34X_GPIO_LED_STATUS, 1);
- ath79_gpio_output_select(DR34X_GPIO_LED_STATUS, 0);
-
- ath79_register_gpio_keys_polled(-1, DR344_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dr34x_gpio_keys),
- dr34x_gpio_keys);
-
- ath79_register_usb();
-
- ath79_register_wmac(art + DR34X_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_pci();
-
- mdiobus_register_board_info(dr34x_mdio0_info,
- ARRAY_SIZE(dr34x_mdio0_info));
-
- ath79_register_mdio(0, 0x0);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_SW_ONLY_MODE);
-
- /* GMAC0 is connected to an AR8035 Gbps PHY */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x02000000;
- ath79_eth0_pll_data.pll_100 = 0x0101;
- ath79_eth0_pll_data.pll_10 = 0x1313;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac + DR34X_MAC0_OFFSET, 0);
- ath79_register_eth(0);
-}
-
-static void __init dr342_setup(void)
-{
- dr34x_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dr342_leds_gpio),
- dr342_leds_gpio);
-}
-
-static void __init dr344_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f03f810);
-
- dr34x_setup();
-
- ath79_gpio_direction_select(DR344_GPIO_LED_LAN, true);
- gpio_set_value(DR344_GPIO_LED_LAN, 1);
- ath79_gpio_output_select(DR344_GPIO_LED_LAN, 0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dr344_leds_gpio),
- dr344_leds_gpio);
-
- ath79_wmac_set_ext_lna_gpio(0, DR344_GPIO_EXTERNAL_LNA0);
- ath79_wmac_set_ext_lna_gpio(1, DR344_GPIO_EXTERNAL_LNA1);
-
- ath79_register_mdio(1, 0x0);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac + DR34X_MAC1_OFFSET, 0);
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_DR342, "DR342", "Wallys DR342", dr342_setup);
-MIPS_MACHINE(ATH79_MACH_DR344, "DR344", "Wallys DR344", dr344_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dr531.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dr531.c
deleted file mode 100644
index b638a9001c..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dr531.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Wallys DR531 board support
- *
- * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
- *
- * Based on mach-wpj531.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define DR531_GPIO_BUZZER 4
-#define DR531_GPIO_LED_WAN 11
-#define DR531_GPIO_LED_LAN 14
-#define DR531_GPIO_LED_SIG1 12
-#define DR531_GPIO_LED_SIG2 16
-#define DR531_GPIO_LED_SIG3 15
-#define DR531_GPIO_LED_SIG4 13
-
-#define DR531_GPIO_BTN_RESET 17
-
-#define DR531_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DR531_KEYS_DEBOUNCE_INTERVAL (3 * DR531_KEYS_POLL_INTERVAL)
-
-#define DR531_MAC0_OFFSET 0x0
-#define DR531_MAC1_OFFSET 0x8
-#define DR531_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led dr531_leds_gpio[] __initdata = {
- {
- .name = "dr531:green:wan",
- .gpio = DR531_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "dr531:green:lan",
- .gpio = DR531_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "dr531:green:sig1",
- .gpio = DR531_GPIO_LED_SIG1,
- .active_low = 1,
- },
- {
- .name = "dr531:green:sig2",
- .gpio = DR531_GPIO_LED_SIG2,
- .active_low = 1,
- },
- {
- .name = "dr531:green:sig3",
- .gpio = DR531_GPIO_LED_SIG3,
- .active_low = 1,
- },
- {
- .name = "dr531:green:sig4",
- .gpio = DR531_GPIO_LED_SIG4,
- .active_low = 1,
- },
- {
- .name = "dr531:buzzer",
- .gpio = DR531_GPIO_BUZZER,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button dr531_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DR531_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DR531_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init dr531_gpio_setup(void)
-{
- ath79_gpio_direction_select(DR531_GPIO_BUZZER, true);
- ath79_gpio_direction_select(DR531_GPIO_LED_WAN, true);
- ath79_gpio_direction_select(DR531_GPIO_LED_LAN, true);
- ath79_gpio_direction_select(DR531_GPIO_LED_SIG1, true);
- ath79_gpio_direction_select(DR531_GPIO_LED_SIG2, true);
- ath79_gpio_direction_select(DR531_GPIO_LED_SIG3, true);
- ath79_gpio_direction_select(DR531_GPIO_LED_SIG4, true);
-
- ath79_gpio_output_select(DR531_GPIO_BUZZER, 0);
- ath79_gpio_output_select(DR531_GPIO_LED_WAN, 0);
- ath79_gpio_output_select(DR531_GPIO_LED_LAN, 0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dr531_leds_gpio),
- dr531_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, DR531_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dr531_gpio_keys),
- dr531_gpio_keys);
-}
-
-static void __init dr531_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1f03f810);
-
- ath79_register_m25p80(NULL);
-
- dr531_gpio_setup();
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac + DR531_MAC1_OFFSET, 0);
- ath79_register_eth(0);
-
- /* WAN */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac + DR531_MAC0_OFFSET, 0);
- ath79_register_eth(1);
-
- ath79_register_wmac(art + DR531_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_pci();
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_DR531, "DR531", "Wallys DR531", dr531_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dragino2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dragino2.c
deleted file mode 100644
index 95bd6f41a3..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-dragino2.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * DRAGINO V2 board support, based on Atheros AP121 board support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2012 Elektra Wagenrad <elektra@villagetelco.org>
- * Copyright (C) 2014 Vittorio Gambaletta <openwrt@vittgam.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DRAGINO2_GPIO_LED_WLAN 0
-#define DRAGINO2_GPIO_LED_LAN 13
-#define DRAGINO2_GPIO_LED_WAN 17
-
-/*
- * The following GPIO is named "SYS" on newer revisions of the the board.
- * It was previously used to indicate USB activity, even though it was
- * named "Router".
- */
-
-#define DRAGINO2_GPIO_LED_SYS 28
-#define DRAGINO2_GPIO_BTN_JUMPSTART 11
-#define DRAGINO2_GPIO_BTN_RESET 12
-
-#define DRAGINO2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DRAGINO2_KEYS_DEBOUNCE_INTERVAL (3 * DRAGINO2_KEYS_POLL_INTERVAL)
-
-#define DRAGINO2_MAC0_OFFSET 0x0000
-#define DRAGINO2_MAC1_OFFSET 0x0006
-#define DRAGINO2_CALDATA_OFFSET 0x1000
-#define DRAGINO2_WMAC_MAC_OFFSET 0x1002
-
-static struct gpio_led dragino2_leds_gpio[] __initdata = {
- {
- .name = "dragino2:red:wlan",
- .gpio = DRAGINO2_GPIO_LED_WLAN,
- .active_low = 0,
- },
- {
- .name = "dragino2:red:wan",
- .gpio = DRAGINO2_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "dragino2:red:lan",
- .gpio = DRAGINO2_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "dragino2:red:system",
- .gpio = DRAGINO2_GPIO_LED_SYS,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button dragino2_gpio_keys[] __initdata = {
- {
- .desc = "jumpstart button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DRAGINO2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DRAGINO2_GPIO_BTN_JUMPSTART,
- .active_low = 1,
- },
- {
- .desc = "reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DRAGINO2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DRAGINO2_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init dragino2_common_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
- ath79_register_wmac(art + DRAGINO2_CALDATA_OFFSET,
- art + DRAGINO2_WMAC_MAC_OFFSET);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + DRAGINO2_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art + DRAGINO2_MAC1_OFFSET, 0);
-
- ath79_register_mdio(0, 0x0);
-
- /* Enable GPIO13, GPIO14, GPIO15, GPIO16 and GPIO17 */
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- /* LAN port */
- ath79_register_eth(1);
-
- /* WAN port */
- ath79_register_eth(0);
-
- /* Enable GPIO26 and GPIO27 */
- ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP,
- ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP) |
- AR933X_BOOTSTRAP_MDIO_GPIO_EN);
-}
-
-static void __init dragino2_setup(void)
-{
- dragino2_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dragino2_leds_gpio),
- dragino2_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DRAGINO2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dragino2_gpio_keys),
- dragino2_gpio_keys);
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_DRAGINO2, "DRAGINO2", "Dragino Dragino v2",
- dragino2_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e1700ac-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e1700ac-v2.c
deleted file mode 100644
index 1ba47a4255..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-e1700ac-v2.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Qxwlan E1700AC v2 board support
- *
- * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com>
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define E1700AC_V2_GPIO_LED_SYS 1
-#define E1700AC_V2_GPIO_LED_USB 7
-#define E1700AC_V2_GPIO_LED_WLAN2G 19
-
-#define E1700AC_V2_GPIO_BTN_SW1 2
-#define E1700AC_V2_GPIO_BTN_RESET 11
-
-#define E1700AC_V2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define E1700AC_V2_KEYS_DEBOUNCE_INTERVAL \
- (3 * E1700AC_V2_KEYS_POLL_INTERVAL)
-
-static struct gpio_led e1700ac_v2_leds_gpio[] __initdata = {
- {
- .name = "e1700ac-v2:green:system",
- .gpio = E1700AC_V2_GPIO_LED_SYS,
- .active_low = 1,
- }, {
- .name = "e1700ac-v2:green:usb",
- .gpio = E1700AC_V2_GPIO_LED_USB,
- .active_low = 1,
- }, {
- .name = "e1700ac-v2:green:wlan2g",
- .gpio = E1700AC_V2_GPIO_LED_WLAN2G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button e1700ac_v2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = E1700AC_V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = E1700AC_V2_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "sw1",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = E1700AC_V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = E1700AC_V2_GPIO_BTN_SW1,
- .active_low = 1,
- },
-};
-
-static const struct ar8327_led_info e1700ac_v2_leds_qca8334[] = {
- AR8327_LED_INFO(PHY1_0, HW, "e1700ac-v2:green:lan"),
- AR8327_LED_INFO(PHY2_0, HW, "e1700ac-v2:green:wan"),
-};
-
-/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */
-static struct ar8327_led_cfg e1700ac_v2_qca8334_led_cfg = {
- .led_ctrl0 = 0xcf37cf37,
- .led_ctrl1 = 0xcf37cf37,
- .led_ctrl2 = 0xcf37cf37,
- .led_ctrl3 = 0x0,
- .open_drain = true,
-};
-
-static struct ar8327_pad_cfg e1700ac_v2_qca8334_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data e1700ac_v2_qca8334_data = {
- .pad0_cfg = &e1700ac_v2_qca8334_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &e1700ac_v2_qca8334_led_cfg,
- .leds = e1700ac_v2_leds_qca8334,
- .num_leds = ARRAY_SIZE(e1700ac_v2_leds_qca8334),
-};
-
-static struct mdio_board_info e1700ac_v2_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &e1700ac_v2_qca8334_data,
- },
-};
-
-static void __init e1700ac_v2_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f050400);
- u8 *art = (u8 *) KSEG1ADDR(0x1f061000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(e1700ac_v2_leds_gpio),
- e1700ac_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, E1700AC_V2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(e1700ac_v2_gpio_keys),
- e1700ac_v2_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
- mdiobus_register_board_info(e1700ac_v2_mdio0_info,
- ARRAY_SIZE(e1700ac_v2_mdio0_info));
-
- /* GMAC0 is connected to QCA8334 switch */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_pll_data.pll_1000 = 0x03000101;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-
- ath79_register_pci();
- ath79_register_usb();
- ath79_register_wmac(art, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_E1700AC_V2, "E1700AC-V2", "Qxwlan E1700AC v2",
- e1700ac_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e2100l.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e2100l.c
deleted file mode 100644
index c09083460e..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-e2100l.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Linksys E2100L board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "nvram.h"
-#include "machtypes.h"
-
-#define E2100L_GPIO_LED_POWER 14
-#define E2100L_GPIO_LED_WPS_AMBER 9
-#define E2100L_GPIO_LED_WPS_BLUE 8
-#define E2100L_GPIO_LED_WLAN 6
-
-#define E2100L_GPIO_BTN_WPS 7
-#define E2100L_GPIO_BTN_RESET 21
-
-#define E2100L_KEYS_POLL_INTERVAL 20 /* msecs */
-#define E2100L_KEYS_DEBOUNCE_INTERVAL (3 * E2100L_KEYS_POLL_INTERVAL)
-
-#define E2100L_NVRAM_ADDR 0x1f7e0000
-#define E2100L_NVRAM_SIZE 0x10000
-
-static const char *e2100l_part_probes[] = {
- "cybertan",
- NULL,
-};
-
-static struct flash_platform_data e2100l_flash_data = {
- .part_probes = e2100l_part_probes,
-};
-
-static struct gpio_led e2100l_leds_gpio[] __initdata = {
- {
- .name = "e2100l:blue:power",
- .gpio = E2100L_GPIO_LED_POWER,
- .active_low = 1,
- .default_trigger = "default-on",
- }, {
- .name = "e2100l:amber:wps",
- .gpio = E2100L_GPIO_LED_WPS_AMBER,
- .active_low = 1,
- }, {
- .name = "e2100l:blue:wps",
- .gpio = E2100L_GPIO_LED_WPS_BLUE,
- .active_low = 1,
- }, {
- .name = "e2100l:blue:wlan",
- .gpio = E2100L_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button e2100l_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = E2100L_KEYS_DEBOUNCE_INTERVAL,
- .gpio = E2100L_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = E2100L_KEYS_DEBOUNCE_INTERVAL,
- .gpio = E2100L_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init e2100l_setup(void)
-{
- const char *nvram = (char *) KSEG1ADDR(E2100L_NVRAM_ADDR);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac[6];
-
- if (ath79_nvram_parse_mac_addr(nvram, E2100L_NVRAM_SIZE,
- "lan_hwaddr=", mac) == 0) {
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
- }
-
- ath79_register_mdio(0, 0x0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.phy_mask = 0x01;
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(&e2100l_flash_data);
-
- ath79_register_usb();
-
- if (ath79_nvram_parse_mac_addr(nvram, E2100L_NVRAM_SIZE,
- "wl0_hwaddr=", mac) == 0)
- ath79_register_wmac(eeprom, mac);
- else
- ath79_register_wmac(eeprom, NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(e2100l_leds_gpio),
- e2100l_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, E2100L_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(e2100l_gpio_keys),
- e2100l_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_E2100L, "E2100L", "Linksys E2100L",
- e2100l_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e558-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e558-v2.c
deleted file mode 100644
index cc08147209..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-e558-v2.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Qxwlan E558 v2 board support
- *
- * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define E558_V2_GPIO_LED_WLAN 13
-#define E558_V2_GPIO_LED_SYSTEM 14
-#define E558_V2_GPIO_LED_QSS 15
-
-#define E558_V2_GPIO_BTN_RESET 16
-
-#define E558_V2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define E558_V2_KEYS_DEBOUNCE_INTERVAL (3 * E558_V2_KEYS_POLL_INTERVAL)
-
-static struct gpio_led e558_v2_leds_gpio[] __initdata = {
- {
- .name = "e558-v2:green:qss",
- .gpio = E558_V2_GPIO_LED_QSS,
- .active_low = 1,
- },
- {
- .name = "e558-v2:green:system",
- .gpio = E558_V2_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "e558-v2:green:wlan",
- .gpio = E558_V2_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button e558_v2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = E558_V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = E558_V2_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
-static struct ar8327_pad_cfg e558_v2_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
-static struct ar8327_pad_cfg e558_v2_ar8327_pad6_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static const struct ar8327_led_info e558_v2_leds_qca8334[] = {
- AR8327_LED_INFO(PHY2_0, HW, "e558-v2:green:wan"),
- AR8327_LED_INFO(PHY3_0, HW, "e558-v2:green:lan1"),
- AR8327_LED_INFO(PHY4_0, HW, "e558-v2:green:lan2"),
-};
-
-static struct ar8327_led_cfg e558_v2_ar8327_led_cfg = {
- .led_ctrl0 = 0xc737c737,
- .led_ctrl1 = 0x00000000,
- .led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x0030c300,
- .open_drain = false,
-};
-
-static struct ar8327_platform_data e558_v2_ar8327_data = {
- .pad0_cfg = &e558_v2_ar8327_pad0_cfg,
- .pad6_cfg = &e558_v2_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &e558_v2_ar8327_led_cfg,
- .leds = e558_v2_leds_qca8334,
- .num_leds = ARRAY_SIZE(e558_v2_leds_qca8334),
-};
-
-static struct mdio_board_info e558_v2_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &e558_v2_ar8327_data,
- },
-};
-
-static void __init e558_v2_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f050400);
- u8 *art = (u8 *) KSEG1ADDR(0x1f061000);
-
- ath79_register_m25p80(NULL);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(e558_v2_leds_gpio),
- e558_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, E558_V2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(e558_v2_gpio_keys),
- e558_v2_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
- mdiobus_register_board_info(e558_v2_mdio0_info,
- ARRAY_SIZE(e558_v2_mdio0_info));
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x56000000;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_eth(1);
-
- ath79_register_pci();
- ath79_register_usb();
- ath79_register_wmac(art, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_E558_V2, "E558-V2", "Qxwlan E558 v2",
- e558_v2_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e600g-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e600g-v2.c
deleted file mode 100644
index 29411dea86..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-e600g-v2.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * Qxwlan E600G/E600GAC v2 board support
- *
- * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com>
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define E600G_V2_GPIO_LED_LAN 16
-#define E600G_V2_GPIO_LED_SYS 13
-#define E600G_V2_GPIO_LED_WAN_B 4
-#define E600G_V2_GPIO_LED_WAN_G 15
-
-#define E600GAC_V2_GPIO_LED_CTRL_B 14
-#define E600GAC_V2_GPIO_LED_CTRL_G 11
-#define E600GAC_V2_GPIO_LED_CTRL_R 12
-#define E600GAC_V2_GPIO_LED_LAN 16
-#define E600GAC_V2_GPIO_LED_SYS 13
-#define E600GAC_V2_GPIO_LED_WAN_G 15
-#define E600GAC_V2_GPIO_LED_WAN_O 4
-
-#define E600G_V2_GPIO_BTN_RESET 17
-#define E600GAC_V2_GPIO_BTN_WPS 1
-
-#define E600G_V2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define E600G_V2_KEYS_DEBOUNCE_INTERVAL (3 * E600G_V2_KEYS_POLL_INTERVAL)
-
-static struct gpio_led e600g_v2_leds_gpio[] __initdata = {
- {
- .name = "e600g-v2:blue:system",
- .gpio = E600G_V2_GPIO_LED_SYS,
- .active_low = 1,
- }, {
- .name = "e600g-v2:blue:wan",
- .gpio = E600G_V2_GPIO_LED_WAN_B,
- .active_low = 1,
- }, {
- .name = "e600g-v2:green:lan",
- .gpio = E600G_V2_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "e600g-v2:green:wan",
- .gpio = E600G_V2_GPIO_LED_WAN_G,
- .active_low = 1,
- },
-};
-
-static struct gpio_led e600gac_v2_leds_gpio[] __initdata = {
- {
- .name = "e600gac-v2:blue:control",
- .gpio = E600GAC_V2_GPIO_LED_CTRL_B,
- .active_low = 1,
- }, {
- .name = "e600gac-v2:green:control",
- .gpio = E600GAC_V2_GPIO_LED_CTRL_G,
- .active_low = 1,
- }, {
- .name = "e600gac-v2:red:control",
- .gpio = E600GAC_V2_GPIO_LED_CTRL_R,
- .active_low = 1,
- }, {
- .name = "e600gac-v2:green:system",
- .gpio = E600GAC_V2_GPIO_LED_SYS,
- .active_low = 1,
- }, {
- .name = "e600gac-v2:orange:wan",
- .gpio = E600GAC_V2_GPIO_LED_WAN_O,
- .active_low = 1,
- }, {
- .name = "e600gac-v2:green:lan",
- .gpio = E600GAC_V2_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "e600gac-v2:green:wan",
- .gpio = E600GAC_V2_GPIO_LED_WAN_G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button e600g_v2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = E600G_V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = E600G_V2_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button e600gac_v2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = E600G_V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = E600G_V2_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = E600G_V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = E600GAC_V2_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static void __init e600g_v2_common_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f050400);
- u8 *art = (u8 *) KSEG1ADDR(0x1f061000);
-
- ath79_register_m25p80(NULL);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = 0xfe;
-
- /* LAN */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- /* WAN */
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.phy_mask = BIT(0);
- ath79_eth1_data.speed = SPEED_1000;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_eth(1);
-
- ath79_register_pci();
- ath79_register_usb();
- ath79_register_wmac(art, NULL);
-}
-
-static void __init e600g_v2_setup(void)
-{
- e600g_v2_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(e600g_v2_leds_gpio),
- e600g_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, E600G_V2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(e600g_v2_gpio_keys),
- e600g_v2_gpio_keys);
-}
-
-static void __init e600gac_v2_setup(void)
-{
- e600g_v2_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(e600gac_v2_leds_gpio),
- e600gac_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, E600G_V2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(e600gac_v2_gpio_keys),
- e600gac_v2_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_E600G_V2, "E600G-V2", "Qxwlan E600G v2",
- e600g_v2_setup);
-
-MIPS_MACHINE(ATH79_MACH_E600GAC_V2, "E600GAC-V2", "Qxwlan E600GAC v2",
- e600gac_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c
deleted file mode 100644
index 7cf3292c68..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-e750a-v4.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Qxwlan E750A v4 board support
- *
- * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define E750A_V4_GPIO_LED_SYS 14
-#define E750A_V4_GPIO_LED_LAN 19
-#define E750A_V4_GPIO_LED_WAN 18
-#define E750A_V4_GPIO_LED_DS10 15
-#define E750A_V4_GPIO_LED_DS20 20
-#define E750A_V4_GPIO_LED_WLAN 21
-
-#define E750A_V4_GPIO_BTN_RESET 12
-
-#define E750A_V4_KEYS_POLL_INTERVAL 20 /* msecs */
-#define E750A_V4_KEYS_DEBOUNCE_INTERVAL (3 * E750A_V4_KEYS_POLL_INTERVAL)
-
-static struct gpio_led e750a_v4_leds_gpio[] __initdata = {
- {
- .name = "e750a-v4:green:system",
- .gpio = E750A_V4_GPIO_LED_SYS,
- .active_low = 1,
- },
- {
- .name = "e750a-v4:green:lan",
- .gpio = E750A_V4_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "e750a-v4:green:wan",
- .gpio = E750A_V4_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "e750a-v4:green:wlan",
- .gpio = E750A_V4_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "e750a-v4:green:ds10",
- .gpio = E750A_V4_GPIO_LED_DS10,
- .active_low = 1,
- },
- {
- .name = "e750a-v4:green:ds20",
- .gpio = E750A_V4_GPIO_LED_DS20,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button e750a_v4_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = E750A_V4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = E750A_V4_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-
-static void __init e750a_v4_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f050400);
- u8 *art = (u8 *) KSEG1ADDR(0x1f061000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(e750a_v4_leds_gpio),
- e750a_v4_leds_gpio);
- ath79_register_gpio_keys_polled(-1, E750A_V4_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(e750a_v4_gpio_keys),
- e750a_v4_gpio_keys);
-
- ath79_register_mdio(1, 0x0);
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_eth(1);
-
- /* GMAC0 is connected to the PHY4 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- ath79_register_pci();
- ath79_register_usb();
- ath79_register_wmac(art, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_E750A_V4, "E750A-V4", "Qxlan E750A v4",
- e750a_v4_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-e750g-v8.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-e750g-v8.c
deleted file mode 100644
index 9252d1d5ad..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-e750g-v8.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Qxwlan E750G v8 board support
- *
- * Copyright (C) 2017 Peng Zhang <sd20@qxwlan.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-usb.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define E750G_V8_GPIO_LED_SYS 14
-#define E750G_V8_GPIO_LED_DS20 15
-#define E750G_V8_GPIO_LED_DS10 20
-#define E750G_V8_GPIO_LED_WLAN 21
-
-#define E750G_V8_GPIO_BTN_RESET 12
-
-#define E750G_V8_KEYS_POLL_INTERVAL 20 /* msecs */
-#define E750G_V8_KEYS_DEBOUNCE_INTERVAL (3 * E750G_V8_KEYS_POLL_INTERVAL)
-
-static struct gpio_led e750g_v8_leds_gpio[] __initdata = {
- {
- .name = "e750g-v8:green:system",
- .gpio = E750G_V8_GPIO_LED_SYS,
- .active_low = 1,
- },
- {
- .name = "e750g-v8:green:ds10",
- .gpio = E750G_V8_GPIO_LED_DS10,
- .active_low = 1,
- },
- {
- .name = "e750g-v8:green:ds20",
- .gpio = E750G_V8_GPIO_LED_DS20,
- .active_low = 1,
- },
- {
- .name = "e750g-v8:green:wlan",
- .gpio = E750G_V8_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button e750g_v8_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = E750G_V8_KEYS_DEBOUNCE_INTERVAL,
- .gpio = E750G_V8_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static const struct ar8327_led_info e750g_v8_leds_qca8334[] = {
- AR8327_LED_INFO(PHY1_0, HW, "e750g-v8:green:lan"),
- AR8327_LED_INFO(PHY2_0, HW, "e750g-v8:green:wan"),
-};
-
-static struct ar8327_pad_cfg e750g_v8_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- .mac06_exchange_dis = true,
-};
-
-static struct ar8327_led_cfg e750g_v8_ar8327_led_cfg = {
- .led_ctrl0 = 0x00000000,
- .led_ctrl1 = 0xc737c737,
- .led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x00c30c00,
- .open_drain = true,
-};
-
-static struct ar8327_platform_data e750g_v8_ar8327_data = {
- .pad0_cfg = &e750g_v8_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &e750g_v8_ar8327_led_cfg,
- .leds = e750g_v8_leds_qca8334,
- .num_leds = ARRAY_SIZE(e750g_v8_leds_qca8334),
-};
-
-static struct mdio_board_info e750g_v8_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &e750g_v8_ar8327_data,
- },
-};
-
-static void __init e750g_v8_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f050400);
- u8 *art = (u8 *) KSEG1ADDR(0x1f061000);
-
- ath79_register_m25p80(NULL);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(e750g_v8_leds_gpio),
- e750g_v8_leds_gpio);
- ath79_register_gpio_keys_polled(-1, E750G_V8_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(e750g_v8_gpio_keys),
- e750g_v8_gpio_keys);
-
- mdiobus_register_board_info(e750g_v8_mdio0_info,
- ARRAY_SIZE(e750g_v8_mdio0_info));
-
- ath79_register_mdio(0, 0x0);
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_SW_ONLY_MODE);
-
- /* GMAC0 is connected to an AR8327 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-
- ath79_register_pci();
- ath79_register_usb();
- ath79_register_wmac(art, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_E750G_V8, "E750G-V8", "Qxwlan E750G v8",
- e750g_v8_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap120.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-eap120.c
deleted file mode 100644
index 130c7706a6..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap120.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * TP-LINK EAP120 board support
- *
- * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/mdio-gpio.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-
-#define EAP120_GPIO_LED_RED 12
-#define EAP120_GPIO_LED_YEL 13
-#define EAP120_GPIO_LED_GRN 15
-#define EAP120_GPIO_BTN_RESET 4
-
-#define EAP120_KEYS_POLL_INTERVAL 20 /* msecs */
-#define EAP120_KEYS_DEBOUNCE_INTERVAL (3 * EAP120_KEYS_POLL_INTERVAL)
-
-#define EAP120_GPIO_SMI_MDIO 16
-#define EAP120_GPIO_SMI_MDC 17
-
-#define EAP120_LAN_PHYADDR 4
-
-static struct gpio_led eap120_leds_gpio[] __initdata = {
- {
- .name = "eap120:red:system",
- .gpio = EAP120_GPIO_LED_RED,
- .active_low = 1,
- }, {
- .name = "eap120:yellow:system",
- .gpio = EAP120_GPIO_LED_YEL,
- .active_low = 1,
- }, {
- .name = "eap120:green:system",
- .gpio = EAP120_GPIO_LED_GRN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button eap120_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = EAP120_KEYS_DEBOUNCE_INTERVAL,
- .gpio = EAP120_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct mdio_gpio_platform_data eap120_mdio = {
- .mdc = EAP120_GPIO_SMI_MDC,
- .mdio = EAP120_GPIO_SMI_MDIO,
- .phy_mask = ~BIT(EAP120_LAN_PHYADDR),
-};
-
-static struct at803x_platform_data eap120_ar8035_data = {
- .disable_smarteee = 0,
- .enable_rgmii_rx_delay = 1,
- .enable_rgmii_tx_delay = 0,
- .fixup_rgmii_tx_delay = 1,
-};
-
-static struct platform_device eap120_phy_device = {
- .name = "mdio-gpio",
- .id = 0,
- .dev = {
- .platform_data = &eap120_mdio, &eap120_ar8035_data
- },
-};
-
-static void __init eap_setup(u8 *mac)
-{
- ath79_register_leds_gpio(-1, ARRAY_SIZE(eap120_leds_gpio),
- eap120_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, EAP120_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(eap120_gpio_keys),
- eap120_gpio_keys);
-
- ath79_register_m25p80(NULL);
-
- /* MDIO Interface */
- platform_device_register(&eap120_phy_device);
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-
- /* GMAC0 is connected to the RGMII interface to an Atheros AR8035-A */
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.mii_bus_dev = &eap120_phy_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(EAP120_LAN_PHYADDR);
- ath79_eth0_pll_data.pll_1000 = 0x0e000000;
- ath79_eth0_pll_data.pll_100 = 0x00000101;
- ath79_eth0_pll_data.pll_10 = 0x00001313;
- ath79_register_eth(0);
-}
-
-static void __init eap120_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f030008);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- eap_setup(mac);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_EAP120, "EAP120", "TP-LINK EAP120",
- eap120_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap300v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-eap300v2.c
deleted file mode 100644
index ba577e2517..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap300v2.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * EnGenius EAP300 v2 board support
- *
- * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define EAP300V2_GPIO_LED_POWER 0
-#define EAP300V2_GPIO_LED_LAN 16
-#define EAP300V2_GPIO_LED_WLAN 17
-
-#define EAP300V2_GPIO_BTN_RESET 1
-
-#define EAP300V2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define EAP300V2_KEYS_DEBOUNCE_INTERVAL (3 * EAP300V2_KEYS_POLL_INTERVAL)
-
-static struct gpio_led eap300v2_leds_gpio[] __initdata = {
- {
- .name = "engenius:blue:power",
- .gpio = EAP300V2_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "engenius:blue:lan",
- .gpio = EAP300V2_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "engenius:blue:wlan",
- .gpio = EAP300V2_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button eap300v2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = EAP300V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = EAP300V2_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-#define EAP300V2_ART_MAC_OFFSET 2
-
-#define EAP300V2_LAN_PHYMASK BIT(0)
-
-static void __init eap300v2_setup(void)
-{
- u8 *art = (u8 *)KSEG1ADDR(0x1fff1000);
-
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
-
- ath79_gpio_output_select(EAP300V2_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(EAP300V2_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(EAP300V2_GPIO_LED_WLAN, AR934X_GPIO_OUT_GPIO);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(eap300v2_leds_gpio),
- eap300v2_leds_gpio);
- ath79_register_gpio_keys_polled(-1, EAP300V2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(eap300v2_gpio_keys),
- eap300v2_gpio_keys);
-
- ath79_register_m25p80(NULL);
- ath79_register_wmac(art, NULL);
- ath79_register_mdio(1, 0x0);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + EAP300V2_ART_MAC_OFFSET, 0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = EAP300V2_LAN_PHYMASK;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = EAP300V2_LAN_PHYMASK;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_EAP300V2, "EAP300V2", "EnGenius EAP300 v2",
- eap300v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap7660d.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-eap7660d.c
deleted file mode 100644
index 787e6275d6..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-eap7660d.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Senao EAP7660D board support
- *
- * Copyright (C) 2010 Daniel Golle <daniel.golle@gmail.com>
- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/ath5k_platform.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define EAP7660D_KEYS_POLL_INTERVAL 20 /* msecs */
-#define EAP7660D_KEYS_DEBOUNCE_INTERVAL (3 * EAP7660D_KEYS_POLL_INTERVAL)
-
-#define EAP7660D_GPIO_DS4 7
-#define EAP7660D_GPIO_DS5 2
-#define EAP7660D_GPIO_DS7 0
-#define EAP7660D_GPIO_DS8 4
-#define EAP7660D_GPIO_SW1 3
-#define EAP7660D_GPIO_SW3 8
-#define EAP7660D_PHYMASK BIT(20)
-#define EAP7660D_BOARDCONFIG 0x1F7F0000
-#define EAP7660D_GBIC_MAC_OFFSET 0x1000
-#define EAP7660D_WMAC0_MAC_OFFSET 0x1010
-#define EAP7660D_WMAC1_MAC_OFFSET 0x1016
-#define EAP7660D_WMAC0_CALDATA_OFFSET 0x2000
-#define EAP7660D_WMAC1_CALDATA_OFFSET 0x3000
-
-#ifdef CONFIG_PCI
-static struct ath5k_platform_data eap7660d_wmac0_data;
-static struct ath5k_platform_data eap7660d_wmac1_data;
-static char eap7660d_wmac0_mac[6];
-static char eap7660d_wmac1_mac[6];
-static u16 eap7660d_wmac0_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
-static u16 eap7660d_wmac1_eeprom[ATH5K_PLAT_EEP_MAX_WORDS];
-
-static int eap7660d_pci_plat_dev_init(struct pci_dev *dev)
-{
- switch (PCI_SLOT(dev->devfn)) {
- case 17:
- dev->dev.platform_data = &eap7660d_wmac0_data;
- break;
-
- case 18:
- dev->dev.platform_data = &eap7660d_wmac1_data;
- break;
- }
-
- return 0;
-}
-
-void __init eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
- u8 *cal_data1, u8 *mac_addr1)
-{
- if (cal_data0 && *cal_data0 == 0xa55a) {
- memcpy(eap7660d_wmac0_eeprom, cal_data0,
- ATH5K_PLAT_EEP_MAX_WORDS);
- eap7660d_wmac0_data.eeprom_data = eap7660d_wmac0_eeprom;
- }
-
- if (cal_data1 && *cal_data1 == 0xa55a) {
- memcpy(eap7660d_wmac1_eeprom, cal_data1,
- ATH5K_PLAT_EEP_MAX_WORDS);
- eap7660d_wmac1_data.eeprom_data = eap7660d_wmac1_eeprom;
- }
-
- if (mac_addr0) {
- memcpy(eap7660d_wmac0_mac, mac_addr0,
- sizeof(eap7660d_wmac0_mac));
- eap7660d_wmac0_data.macaddr = eap7660d_wmac0_mac;
- }
-
- if (mac_addr1) {
- memcpy(eap7660d_wmac1_mac, mac_addr1,
- sizeof(eap7660d_wmac1_mac));
- eap7660d_wmac1_data.macaddr = eap7660d_wmac1_mac;
- }
-
- ath79_pci_set_plat_dev_init(eap7660d_pci_plat_dev_init);
- ath79_register_pci();
-}
-#else
-static inline void eap7660d_pci_init(u8 *cal_data0, u8 *mac_addr0,
- u8 *cal_data1, u8 *mac_addr1)
-{
-}
-#endif /* CONFIG_PCI */
-
-static struct gpio_led eap7660d_leds_gpio[] __initdata = {
- {
- .name = "eap7660d:green:ds8",
- .gpio = EAP7660D_GPIO_DS8,
- .active_low = 0,
- },
- {
- .name = "eap7660d:green:ds5",
- .gpio = EAP7660D_GPIO_DS5,
- .active_low = 0,
- },
- {
- .name = "eap7660d:green:ds7",
- .gpio = EAP7660D_GPIO_DS7,
- .active_low = 0,
- },
- {
- .name = "eap7660d:green:ds4",
- .gpio = EAP7660D_GPIO_DS4,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button eap7660d_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
- .gpio = EAP7660D_GPIO_SW1,
- .active_low = 1,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = EAP7660D_KEYS_DEBOUNCE_INTERVAL,
- .gpio = EAP7660D_GPIO_SW3,
- .active_low = 1,
- }
-};
-
-static const char *eap7660d_part_probes[] = {
- "RedBoot",
- NULL,
-};
-
-static struct flash_platform_data eap7660d_flash_data = {
- .part_probes = eap7660d_part_probes,
-};
-
-static void __init eap7660d_setup(void)
-{
- u8 *boardconfig = (u8 *) KSEG1ADDR(EAP7660D_BOARDCONFIG);
-
- ath79_register_mdio(0, ~EAP7660D_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- boardconfig + EAP7660D_GBIC_MAC_OFFSET, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = EAP7660D_PHYMASK;
- ath79_register_eth(0);
- ath79_register_m25p80(&eap7660d_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(eap7660d_leds_gpio),
- eap7660d_leds_gpio);
- ath79_register_gpio_keys_polled(-1, EAP7660D_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(eap7660d_gpio_keys),
- eap7660d_gpio_keys);
- eap7660d_pci_init(boardconfig + EAP7660D_WMAC0_CALDATA_OFFSET,
- boardconfig + EAP7660D_WMAC0_MAC_OFFSET,
- boardconfig + EAP7660D_WMAC1_CALDATA_OFFSET,
- boardconfig + EAP7660D_WMAC1_MAC_OFFSET);
-};
-
-MIPS_MACHINE(ATH79_MACH_EAP7660D, "EAP7660D", "Senao EAP7660D",
- eap7660d_setup);
-
-MIPS_MACHINE(ATH79_MACH_ALL0305, "ALL0305", "Allnet ALL0305",
- eap7660d_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-el-m150.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-el-m150.c
deleted file mode 100644
index b95d6c2f68..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-el-m150.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Easy-Link EL-M150 board support
- *
- * Copyright (C) 2012 huangfc <huangfangcheng@163.com>
- * Copyright (C) 2012 HYS <550663898@qq.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "dev-usb.h"
-
-#define EL_M150_GPIO_BTN6 6
-#define EL_M150_GPIO_BTN7 7
-#define EL_M150_GPIO_BTN_RESET 11
-
-#define EL_M150_GPIO_LED_SYSTEM 27
-#define EL_M150_GPIO_USB_POWER 8
-
-#define EL_M150_KEYS_POLL_INTERVAL 20 /* msecs */
-#define EL_M150_KEYS_DEBOUNCE_INTERVAL (3 * EL_M150_KEYS_POLL_INTERVAL)
-
-static const char *EL_M150_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data EL_M150_flash_data = {
- .part_probes = EL_M150_part_probes,
-};
-
-static struct gpio_led EL_M150_leds_gpio[] __initdata = {
- {
- .name = "easylink:green:system",
- .gpio = EL_M150_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button EL_M150_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
- .gpio = EL_M150_GPIO_BTN_RESET,
- .active_low = 0,
- },
- {
- .desc = "BTN_6",
- .type = EV_KEY,
- .code = BTN_6,
- .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
- .gpio = EL_M150_GPIO_BTN6,
- .active_low = 1,
- },
- {
- .desc = "BTN_7",
- .type = EV_KEY,
- .code = BTN_7,
- .debounce_interval = EL_M150_KEYS_DEBOUNCE_INTERVAL,
- .gpio = EL_M150_GPIO_BTN7,
- .active_low = 1,
- },
-};
-
-static void __init el_m150_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(EL_M150_leds_gpio),
- EL_M150_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, EL_M150_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(EL_M150_gpio_keys),
- EL_M150_gpio_keys);
-
- gpio_request_one(EL_M150_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_register_m25p80(&EL_M150_flash_data);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_EL_M150, "EL-M150",
- "EasyLink EL-M150", el_m150_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-el-mini.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-el-mini.c
deleted file mode 100644
index 9879b18f7c..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-el-mini.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Easy-Link EL-MINI board support
- *
- * Copyright (C) 2012 huangfc <huangfangcheng@163.com>
- * Copyright (C) 2011 hys <550663898@qq.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define MINI_GPIO_LED_SYSTEM 27
-#define MINI_GPIO_BTN_RESET 11
-
-#define MINI_GPIO_USB_POWER 8
-
-#define MINI_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MINI_KEYS_DEBOUNCE_INTERVAL (3 * MINI_KEYS_POLL_INTERVAL)
-
-static const char *mini_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data mini_flash_data = {
- .part_probes = mini_part_probes,
-};
-
-static struct gpio_led mini_leds_gpio[] __initdata = {
- {
- .name = "easylink:green:system",
- .gpio = MINI_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button mini_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MINI_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MINI_GPIO_BTN_RESET,
- .active_low = 0,
- }
-};
-
-static void __init el_mini_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&mini_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(mini_leds_gpio),
- mini_leds_gpio);
- ath79_register_gpio_keys_polled(-1, MINI_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mini_gpio_keys),
- mini_gpio_keys);
-
- gpio_request_one(MINI_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_EL_MINI, "EL-MINI", "EasyLink EL-MINI",
- el_mini_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ens202ext.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ens202ext.c
deleted file mode 100644
index 07dbc2e69d..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ens202ext.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * EnGenius ENS202EXT board support
- *
- * Copyright (C) 2017 Marty Plummer <netz.kernel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define ENS202_GPIO_LED_WLAN4 0
-#define ENS202_GPIO_LED_POWER 14
-#define ENS202_GPIO_LED_WLAN2 16
-#define ENS202_GPIO_LED_WLAN3 17
-#define ENS202_GPIO_LED_WLAN1 18
-
-#define ENS202_GPIO_BTN_RESET 1
-
-#define ENS202_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ENS202_KEYS_DEBOUNCE_INTERVAL (3 * ENS202_KEYS_POLL_INTERVAL)
-
-static struct gpio_led ens202_leds_gpio[] __initdata = {
- {
- .name = "engenius:amber:wlan1",
- .gpio = ENS202_GPIO_LED_WLAN1,
- .active_low = 1,
- }, {
- .name = "engenius:red:wlan2",
- .gpio = ENS202_GPIO_LED_WLAN2,
- .active_low = 1,
- }, {
- .name = "engenius:amber:wlan3",
- .gpio = ENS202_GPIO_LED_WLAN3,
- .active_low = 1,
- }, {
- .name = "engenius:green:wlan4",
- .gpio = ENS202_GPIO_LED_WLAN4,
- .active_low = 1,
- }, {
- .name = "engenius:amber:power",
- .gpio = ENS202_GPIO_LED_POWER,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ens202_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ENS202_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ENS202_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init ens202_setup(void)
-{
- const char *nvram = (char *) KSEG1ADDR(0x1f040000);
- u8 mac_buff[6];
- u8 *mac = NULL;
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- if (ath79_nvram_parse_mac_addr(nvram, 0x10000,
- "ethaddr=", mac_buff) == 0) {
- ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1);
- mac = mac_buff;
- }
-
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
-
- ath79_gpio_output_select(ENS202_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(ENS202_GPIO_LED_WLAN1, AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(ENS202_GPIO_LED_WLAN2, AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(ENS202_GPIO_LED_WLAN3, AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(ENS202_GPIO_LED_WLAN4, AR934X_GPIO_OUT_GPIO);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ens202_leds_gpio),
- ens202_leds_gpio);
- ath79_register_gpio_keys_polled(-1, ENS202_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ens202_gpio_keys),
- ens202_gpio_keys);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_wmac(art + 0x1000, NULL);
-
- ath79_register_mdio(1, 0);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_SW_ONLY_MODE);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_ENS202EXT, "ENS202EXT", "EnGenius ENS202EXT",
- ens202_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c
deleted file mode 100644
index 89d6ec6fe3..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-epg5000.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * EnGenius EPG5000 board support
- *
- * Copyright (c) 2014 Jon Suphammer <jon@suphammer.net>
- * Copyright (c) 2015 Christian Beier <cb@shoutrlabs.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define EPG5000_GPIO_LED_WLAN_5G 23
-#define EPG5000_GPIO_LED_WLAN_2G 13
-#define EPG5000_GPIO_LED_POWER_AMBER 2
-#define EPG5000_GPIO_LED_WPS_AMBER 22
-#define EPG5000_GPIO_LED_WPS_BLUE 19
-
-#define EPG5000_GPIO_BTN_WPS 16
-#define EPG5000_GPIO_BTN_RESET 17
-
-#define EPG5000_KEYS_POLL_INTERVAL 20 /* msecs */
-#define EPG5000_KEYS_DEBOUNCE_INTERVAL (3 * EPG5000_KEYS_POLL_INTERVAL)
-
-#define EPG5000_CALDATA_ADDR 0x1fff0000
-#define EPG5000_WMAC_CALDATA_OFFSET 0x1000
-#define EPG5000_PCIE_CALDATA_OFFSET 0x5000
-
-#define EPG5000_NVRAM_ADDR 0x1f030000
-#define EPG5000_NVRAM_SIZE 0x10000
-
-static struct gpio_led epg5000_leds_gpio[] __initdata = {
- {
- .name = "epg5000:amber:power",
- .gpio = EPG5000_GPIO_LED_POWER_AMBER,
- .active_low = 1,
- },
- {
- .name = "epg5000:blue:wps",
- .gpio = EPG5000_GPIO_LED_WPS_BLUE,
- .active_low = 1,
- },
- {
- .name = "epg5000:amber:wps",
- .gpio = EPG5000_GPIO_LED_WPS_AMBER,
- .active_low = 1,
- },
- {
- .name = "epg5000:blue:wlan-2g",
- .gpio = EPG5000_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
- .name = "epg5000:blue:wlan-5g",
- .gpio = EPG5000_GPIO_LED_WLAN_5G,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button epg5000_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = EPG5000_KEYS_DEBOUNCE_INTERVAL,
- .gpio = EPG5000_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = EPG5000_KEYS_DEBOUNCE_INTERVAL,
- .gpio = EPG5000_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg epg5000_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data epg5000_ar8327_data = {
- .pad0_cfg = &epg5000_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info epg5000_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &epg5000_ar8327_data,
- },
-};
-
-static int epg5000_get_mac(const char *name, char *mac)
-{
- u8 *nvram = (u8 *) KSEG1ADDR(EPG5000_NVRAM_ADDR);
- int err;
-
- err = ath79_nvram_parse_mac_addr(nvram, EPG5000_NVRAM_SIZE,
- name, mac);
- if (err) {
- pr_err("no MAC address found for %s\n", name);
- return false;
- }
-
- return true;
-}
-
-static void __init epg5000_setup(void)
-{
- u8 *caldata = (u8 *) KSEG1ADDR(EPG5000_CALDATA_ADDR);
- u8 mac1[ETH_ALEN];
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(epg5000_leds_gpio),
- epg5000_leds_gpio);
- ath79_register_gpio_keys_polled(-1, EPG5000_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(epg5000_gpio_keys),
- epg5000_gpio_keys);
-
- ath79_register_usb();
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(epg5000_mdio0_info,
- ARRAY_SIZE(epg5000_mdio0_info));
-
- /* GMAC0 is connected to an QCA8327N switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- if (epg5000_get_mac("ethaddr=", mac1))
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-
- ath79_eth0_pll_data.pll_1000 = 0xa6000000;
- ath79_register_eth(0);
-
- ath79_register_wmac(caldata + EPG5000_WMAC_CALDATA_OFFSET, mac1);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_EPG5000, "EPG5000",
- "EnGenius EPG5000",
- epg5000_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c
deleted file mode 100644
index c275ef6f1b..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-esr1750.c
+++ /dev/null
@@ -1,176 +0,0 @@
-/*
- * EnGenius ESR1750 board support
- *
- * Copyright (c) 2014 Jon Suphammer <jon@suphammer.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define ESR1750_GPIO_LED_WLAN_5G 23
-#define ESR1750_GPIO_LED_WLAN_2G 13
-#define ESR1750_GPIO_LED_POWER_AMBER 2
-#define ESR1750_GPIO_LED_WPS_AMBER 22
-#define ESR1750_GPIO_LED_WPS_BLUE 19
-
-#define ESR1750_GPIO_BTN_WPS 16
-#define ESR1750_GPIO_BTN_RESET 17
-
-#define ESR1750_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ESR1750_KEYS_DEBOUNCE_INTERVAL (3 * ESR1750_KEYS_POLL_INTERVAL)
-
-#define ESR1750_CALDATA_ADDR 0x1fff0000
-#define ESR1750_WMAC_CALDATA_OFFSET 0x1000
-#define ESR1750_PCIE_CALDATA_OFFSET 0x5000
-
-#define ESR1750_NVRAM_ADDR 0x1f030000
-#define ESR1750_NVRAM_SIZE 0x10000
-
-static struct gpio_led esr1750_leds_gpio[] __initdata = {
- {
- .name = "esr1750:amber:power",
- .gpio = ESR1750_GPIO_LED_POWER_AMBER,
- .active_low = 1,
- },
- {
- .name = "esr1750:blue:wps",
- .gpio = ESR1750_GPIO_LED_WPS_BLUE,
- .active_low = 1,
- },
- {
- .name = "esr1750:amber:wps",
- .gpio = ESR1750_GPIO_LED_WPS_AMBER,
- .active_low = 1,
- },
- {
- .name = "esr1750:blue:wlan-2g",
- .gpio = ESR1750_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
- .name = "esr1750:blue:wlan-5g",
- .gpio = ESR1750_GPIO_LED_WLAN_5G,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button esr1750_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = ESR1750_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ESR1750_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ESR1750_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ESR1750_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg esr1750_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data esr1750_ar8327_data = {
- .pad0_cfg = &esr1750_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info esr1750_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &esr1750_ar8327_data,
- },
-};
-
-static int esr1750_get_mac(const char *name, char *mac)
-{
- u8 *nvram = (u8 *) KSEG1ADDR(ESR1750_NVRAM_ADDR);
- int err;
-
- err = ath79_nvram_parse_mac_addr(nvram, ESR1750_NVRAM_SIZE,
- name, mac);
- if (err) {
- pr_err("no MAC address found for %s\n", name);
- return false;
- }
-
- return true;
-}
-
-static void __init esr1750_setup(void)
-{
- u8 *caldata = (u8 *) KSEG1ADDR(ESR1750_CALDATA_ADDR);
- u8 mac1[ETH_ALEN];
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(esr1750_leds_gpio),
- esr1750_leds_gpio);
- ath79_register_gpio_keys_polled(-1, ESR1750_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(esr1750_gpio_keys),
- esr1750_gpio_keys);
-
- ath79_register_usb();
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(esr1750_mdio0_info,
- ARRAY_SIZE(esr1750_mdio0_info));
-
- /* GMAC0 is connected to an QCA8327N switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- if (esr1750_get_mac("ethaddr=", mac1))
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-
- ath79_eth0_pll_data.pll_1000 = 0xa6000000;
- ath79_register_eth(0);
-
- ath79_register_wmac(caldata + ESR1750_WMAC_CALDATA_OFFSET, mac1);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_ESR1750, "ESR1750",
- "EnGenius ESR1750",
- esr1750_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c
deleted file mode 100644
index cf2ee9295a..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-esr900.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * EnGenius ESR900 board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt) "esr900: " fmt
-
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define ESR900_GPIO_LED_POWER 2
-#define ESR900_GPIO_LED_WLAN_2G 13
-#define ESR900_GPIO_LED_WPS_BLUE 19
-#define ESR900_GPIO_LED_WPS_AMBER 22
-#define ESR900_GPIO_LED_WLAN_5G 23
-
-#define ESR900_GPIO_BTN_WPS 16
-#define ESR900_GPIO_BTN_RESET 17
-
-#define ESR900_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ESR900_KEYS_DEBOUNCE_INTERVAL (3 * ESR900_KEYS_POLL_INTERVAL)
-
-#define ESR900_CALDATA_ADDR 0x1fff0000
-#define ESR900_WMAC_CALDATA_OFFSET 0x1000
-#define ESR900_PCIE_CALDATA_OFFSET 0x5000
-
-#define ESR900_CONFIG_ADDR 0x1f030000
-#define ESR900_CONFIG_SIZE 0x10000
-
-#define ESR900_LAN_PHYMASK BIT(0)
-#define ESR900_WAN_PHYMASK BIT(5)
-#define ESR900_MDIO_MASK (~(ESR900_LAN_PHYMASK | ESR900_WAN_PHYMASK))
-
-static struct gpio_led esr900_leds_gpio[] __initdata = {
- {
- .name = "engenius:amber:power",
- .gpio = ESR900_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "engenius:blue:wlan-2g",
- .gpio = ESR900_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
- .name = "engenius:blue:wps",
- .gpio = ESR900_GPIO_LED_WPS_BLUE,
- .active_low = 1,
- },
- {
- .name = "engenius:amber:wps",
- .gpio = ESR900_GPIO_LED_WPS_AMBER,
- .active_low = 1,
- },
- {
- .name = "engenius:blue:wlan-5g",
- .gpio = ESR900_GPIO_LED_WLAN_5G,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button esr900_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = ESR900_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ESR900_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ESR900_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ESR900_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg esr900_ar8327_pad0_cfg = {
- /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_pad_cfg esr900_ar8327_pad6_cfg = {
- /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
- .mode = AR8327_PAD_MAC_SGMII,
- .rxclk_delay_en = true,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
-};
-
-static struct ar8327_platform_data esr900_ar8327_data = {
- .pad0_cfg = &esr900_ar8327_pad0_cfg,
- .pad6_cfg = &esr900_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info esr900_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &esr900_ar8327_data,
- },
-};
-
-static void __init esr900_setup(void)
-{
- const char *config = (char *) KSEG1ADDR(ESR900_CONFIG_ADDR);
- u8 *art = (u8 *) KSEG1ADDR(ESR900_CALDATA_ADDR);
- u8 lan_mac[ETH_ALEN];
- u8 wlan0_mac[ETH_ALEN];
- u8 wlan1_mac[ETH_ALEN];
-
- if (ath79_nvram_parse_mac_addr(config, ESR900_CONFIG_SIZE,
- "ethaddr=", lan_mac) == 0) {
- ath79_init_local_mac(ath79_eth0_data.mac_addr, lan_mac);
- ath79_init_mac(wlan0_mac, lan_mac, 0);
- ath79_init_mac(wlan1_mac, lan_mac, 1);
- } else {
- pr_err("could not find ethaddr in u-boot environment\n");
- }
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(esr900_leds_gpio),
- esr900_leds_gpio);
- ath79_register_gpio_keys_polled(-1, ESR900_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(esr900_gpio_keys),
- esr900_gpio_keys);
-
- ath79_register_usb();
-
- ath79_register_wmac(art + ESR900_WMAC_CALDATA_OFFSET, wlan0_mac);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(esr900_mdio0_info,
- ARRAY_SIZE(esr900_mdio0_info));
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = ESR900_LAN_PHYMASK;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_eth0_pll_data.pll_1000 = 0xa6000000;
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
- ath79_register_eth(1);
-
- ap91_pci_init(art + ESR900_PCIE_CALDATA_OFFSET, wlan1_mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_ESR900, "ESR900", "EnGenius ESR900", esr900_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c
deleted file mode 100644
index 2e82ffdaa1..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-balin.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * EW Balin board support
- * (based on Atheros DB120 reference board support)
- *
- * Copyright (c) 2011 Qualcomm Atheros
- * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2017 Embedded Wireless GmbH www.80211.de
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define BALIN_GPIO_LED_STATUS 14
-
-#define BALIN_GPIO_BTN_WPS 18
-
-#define BALIN_KEYS_POLL_INTERVAL 20 /* msecs */
-#define BALIN_KEYS_DEBOUNCE_INTERVAL (3 * BALIN_KEYS_POLL_INTERVAL)
-
-#define BALIN_CALDATA_OFFSET 0x1000
-#define BALIN_WMAC_MAC_OFFSET (BALIN_CALDATA_OFFSET + 0x02)
-
-static struct gpio_led balin_leds_gpio[] __initdata = {
- {
- .name = "balin:green:status",
- .gpio = BALIN_GPIO_LED_STATUS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button balin_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = BALIN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = BALIN_GPIO_BTN_WPS,
- .active_low = 0,
- },
-};
-
-
-static void __init balin_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- static u8 mac[6];
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(balin_leds_gpio),
- balin_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, BALIN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(balin_gpio_keys),
- balin_gpio_keys);
-
- ath79_register_usb();
-
- ath79_register_wmac(art + BALIN_CALDATA_OFFSET, NULL);
-
- ath79_register_pci();
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(1, 0x0);
-
- /* GMAC1 is connected to the internal switch */
- memcpy(mac, art + BALIN_WMAC_MAC_OFFSET, sizeof(mac));
- mac[3] |= 0x40;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_EW_BALIN, "EW-BALIN", "EmbWir-Balin",
- balin_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c
deleted file mode 100644
index 5544596f91..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ew-dorin.c
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * EW Dorin board support
- * (based on Atheros Ref. Design AP121)
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2012-2017 Embedded Wireless GmbH www.80211.de
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DORIN_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DORIN_KEYS_DEBOUNCE_INTERVAL (3 * DORIN_KEYS_POLL_INTERVAL)
-
-#define DORIN_CALDATA_OFFSET 0x1000
-#define DORIN_WMAC_MAC_OFFSET 0x1002
-
-#define DORIN_GPIO_LED_STATUS 21
-
-#define DORIN_GPIO_BTN_JUMPSTART 11
-#define DORIN_GPIO_BTN_RESET 6
-
-static struct gpio_led dorin_leds_gpio[] __initdata = {
- {
- .name = "dorin:green:status",
- .gpio = DORIN_GPIO_LED_STATUS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button dorin_gpio_keys[] __initdata = {
- {
- .desc = "jumpstart button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DORIN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DORIN_GPIO_BTN_JUMPSTART,
- .active_low = 0,
- },
- {
- .desc = "reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DORIN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DORIN_GPIO_BTN_RESET,
- .active_low = 0,
- }
-};
-
-static void __init ew_dorin_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- static u8 mac[6];
-
- ath79_register_m25p80(NULL);
-
- ath79_register_usb();
-
- if (ar93xx_wmac_read_mac_address(mac)) {
- ath79_register_wmac(NULL, NULL);
- } else {
- ath79_register_wmac(art + DORIN_CALDATA_OFFSET,
- art + DORIN_WMAC_MAC_OFFSET);
- memcpy(mac, art + DORIN_WMAC_MAC_OFFSET, sizeof(mac));
- }
-
- mac[3] |= 0x40;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dorin_leds_gpio),
- dorin_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DORIN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dorin_gpio_keys),
- dorin_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_EW_DORIN, "EW-DORIN", "EmbWir-Dorin",
- ew_dorin_setup);
-
-
-static void __init ew_dorin_router_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- static u8 mac[6];
-
- ath79_register_m25p80(NULL);
-
- ath79_register_usb();
-
- if (ar93xx_wmac_read_mac_address(mac)) {
- ath79_register_wmac(NULL, NULL);
- } else {
- ath79_register_wmac(art + DORIN_CALDATA_OFFSET,
- art + DORIN_WMAC_MAC_OFFSET);
- memcpy(mac, art + DORIN_WMAC_MAC_OFFSET, sizeof(mac));
- }
-
- mac[3] |= 0x40;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
- mac[3] &= 0x3F;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_setup_ar933x_phy4_switch(true, true);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
-
- /* WAN port */
- ath79_register_eth(0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(dorin_leds_gpio),
- dorin_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DORIN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(dorin_gpio_keys),
- dorin_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_EW_DORIN_ROUTER, "EW-DORIN-ROUTER",
- "EmbWir-Dorin-Router", ew_dorin_router_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c
deleted file mode 100644
index 232105e068..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-f9k1115v2.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Belkin AC1750DB (F9K1115V2) board support
- *
- * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define F9K1115V2_GPIO_LED_USB2 4
-#define F9K1115V2_GPIO_LED_WPS_AMBER 14
-#define F9K1115V2_GPIO_LED_STATUS_AMBER 15
-#define F9K1115V2_GPIO_LED_WPS_BLUE 19
-#define F9K1115V2_GPIO_LED_STATUS_BLUE 20
-
-#define F9K1115V2_GPIO_BTN_WPS 16
-#define F9K1115V2_GPIO_BTN_RESET 17
-
-#define F9K1115V2_GPIO_USB2_POWER 21
-
-#define F9K1115V2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define F9K1115V2_KEYS_DEBOUNCE_INTERVAL (3 * F9K1115V2_KEYS_POLL_INTERVAL)
-
-#define F9K1115V2_WAN_MAC_OFFSET 0
-#define F9K1115V2_LAN_MAC_OFFSET 6
-#define F9K1115V2_WMAC_CALDATA_OFFSET 0x1000
-#define F9K1115V2_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led f9k1115v2_leds_gpio[] __initdata = {
- {
- .name = "belkin:amber:status",
- .gpio = F9K1115V2_GPIO_LED_STATUS_AMBER,
- .active_low = 1,
- },
- {
- .name = "belkin:blue:status",
- .gpio = F9K1115V2_GPIO_LED_STATUS_BLUE,
- .active_low = 1,
- },
- {
- .name = "belkin:blue:wps",
- .gpio = F9K1115V2_GPIO_LED_WPS_BLUE,
- .active_low = 1,
- },
- {
- .name = "belkin:amber:wps",
- .gpio = F9K1115V2_GPIO_LED_WPS_AMBER,
- .active_low = 1,
- },
- {
- .name = "belkin:green:usb2",
- .gpio = F9K1115V2_GPIO_LED_USB2,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button f9k1115v2_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = F9K1115V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = F9K1115V2_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = F9K1115V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = F9K1115V2_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg f9k1115v2_ar8327_pad0_cfg = {
- /* Use the RGMII interface for the GMAC0 of the AR8337 switch */
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_pad_cfg f9k1115v2_ar8327_pad6_cfg = {
- /* Use the SGMII interface for the GMAC6 of the AR8337 switch */
- .mode = AR8327_PAD_MAC_SGMII,
- .rxclk_delay_en = true,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
-};
-
-static struct ar8327_platform_data f9k1115v2_ar8327_data = {
- .pad0_cfg = &f9k1115v2_ar8327_pad0_cfg,
- .pad6_cfg = &f9k1115v2_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info f9k1115v2_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &f9k1115v2_ar8327_data,
- },
-};
-
-static void __init f9k1115v2_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(f9k1115v2_leds_gpio),
- f9k1115v2_leds_gpio);
- ath79_register_gpio_keys_polled(-1, F9K1115V2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(f9k1115v2_gpio_keys),
- f9k1115v2_gpio_keys);
-
- ath79_register_wmac(art + F9K1115V2_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_mdio(0, 0x0);
- mdiobus_register_board_info(f9k1115v2_mdio0_info,
- ARRAY_SIZE(f9k1115v2_mdio0_info));
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + F9K1115V2_WAN_MAC_OFFSET, 0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr,
- art + F9K1115V2_LAN_MAC_OFFSET, 0);
-
- ath79_eth0_pll_data.pll_1000 = 0xa6000000;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(1);
-
- ath79_register_pci();
-
- ath79_register_usb();
- gpio_request_one(F9K1115V2_GPIO_USB2_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB2 power");
-}
-
-MIPS_MACHINE(ATH79_MACH_F9K1115V2, "F9K1115V2", "Belkin AC1750DB",
- f9k1115v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c
deleted file mode 100644
index 43af71a0a8..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * AVM FRITZ!WLAN Repeater 300E board support
- *
- * Copyright (C) 2017 Mathias Kresin <dev@kresin.me>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define FRITZ300E_KEYS_POLL_INTERVAL 20 /* msecs */
-#define FRITZ300E_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ300E_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition fritz300e_flash_partitions[] = {
- {
- .name = "urloader",
- .offset = 0,
- .size = 0x0020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0020000,
- .size = 0x0ee0000,
- }, {
- .name = "tffs (1)",
- .offset = 0x0f00000,
- .size = 0x0080000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "tffs (2)",
- .offset = 0x0f80000,
- .size = 0x0080000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct flash_platform_data fritz300e_flash_data = {
- .parts = fritz300e_flash_partitions,
- .nr_parts = ARRAY_SIZE(fritz300e_flash_partitions),
-};
-
-static struct gpio_led fritz300e_leds_gpio[] __initdata = {
- {
- .name = "fritz300e:green:power",
- .gpio = 13,
- .active_low = 1,
- }, {
- .name = "fritz300e:green:lan",
- .gpio = 15,
- .active_low = 1,
- }, {
- .name = "fritz300e:green:wlan",
- .gpio = 16,
- .active_low = 1,
- }
-};
-
-static struct gpio_led fritz300e_wmac_leds_gpio[] = {
- {
- .name = "fritz300e:green:rssi0",
- .gpio = 10,
- .active_low = 1,
- }, {
- .name = "fritz300e:green:rssi1",
- .gpio = 4,
- .active_low = 1,
- }, {
- .name = "fritz300e:green:rssi2",
- .gpio = 6,
- .active_low = 1,
- }, {
- .name = "fritz300e:green:rssi3",
- .gpio = 7,
- .active_low = 1,
- }, {
- .name = "fritz300e:green:rssi4",
- .gpio = 5,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button fritz300e_gpio_keys[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = FRITZ300E_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 12,
- .active_low = 1,
- },
-};
-
-static void __init fritz300e_setup(void)
-{
- /* get the Lantiq PEF7071V phy out of reset */
- gpio_request_one(11, GPIOF_OUT_INIT_HIGH, "phy reset");
-
- ath79_register_m25p80(&fritz300e_flash_data);
-
- ath79_register_mdio(0, ~(BIT(0)));
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
-
- ath79_register_eth(0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz300e_leds_gpio),
- fritz300e_leds_gpio);
- ath79_register_gpio_keys_polled(-1, FRITZ300E_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(fritz300e_gpio_keys),
- fritz300e_gpio_keys);
-
- ap9x_pci_setup_wmac_leds(0, fritz300e_wmac_leds_gpio,
- ARRAY_SIZE(fritz300e_wmac_leds_gpio));
- ap91_pci_init_simple();
-}
-
-MIPS_MACHINE(ATH79_MACH_FRITZ300E, "FRITZ300E",
- "AVM FRITZ!WLAN Repeater 300E", fritz300e_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c
deleted file mode 100644
index c00cf681b2..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz4020.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * AVM FRITZ!Box 4020 board support
- *
- * Copyright (C) 2018 David Bauer <mail@david-bauer.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/ath9k_platform.h>
-#include <linux/etherdevice.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_data/mdio-gpio.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/74x164.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-
-#define FRITZ4020_GPIO_SHIFT_SER 19 /* DS, Data Serial Input */
-#define FRITZ4020_GPIO_SHIFT_SRCLK 20 /* SHCP, Shift Reg Clock Input */
-
-#define FRITZ4020_SSR_BIT_0 0
-#define FRITZ4020_SSR_BIT_1 1
-#define FRITZ4020_SSR_BIT_2 2
-#define FRITZ4020_SSR_BIT_3 3
-#define FRITZ4020_SSR_BIT_4 4
-#define FRITZ4020_SSR_BIT_5 5
-#define FRITZ4020_SSR_BIT_6 6
-#define FRITZ4020_SSR_BIT_7 7
-
-#define FRITZ4020_74HC_GPIO_BASE 32
-#define FRITZ4020_74HC_GPIO_LED_LAN (FRITZ4020_74HC_GPIO_BASE + 0)
-#define FRITZ4020_74HC_GPIO_LED_INFO_RED (FRITZ4020_74HC_GPIO_BASE + 1)
-#define FRITZ4020_74HC_GPIO_LED_POWER (FRITZ4020_74HC_GPIO_BASE + 2)
-#define FRITZ4020_74HC_GPIO_LED_WLAN (FRITZ4020_74HC_GPIO_BASE + 3)
-#define FRITZ4020_74HC_GPIO_LED_WAN (FRITZ4020_74HC_GPIO_BASE + 4)
-#define FRITZ4020_74HC_GPIO_USB_RST (FRITZ4020_74HC_GPIO_BASE + 5)
-#define FRITZ4020_74HC_GPIO_LED_INFO (FRITZ4020_74HC_GPIO_BASE + 6)
-
-
-#define FRITZ4020_GPIO_BTN_WPS 2
-#define FRITZ4020_GPIO_BTN_WLAN 21
-#define FRITZ4020_KEYS_POLL_INTERVAL 20 /* msecs */
-#define FRITZ4020_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ4020_KEYS_POLL_INTERVAL)
-
-#define FRTIZ4020_OFFSET_URLADER_WIFI_MAC_REVERSE 0x1979
-
-
-static struct spi_gpio_platform_data fritz4020_spi_data = {
- .sck = FRITZ4020_GPIO_SHIFT_SRCLK,
- .miso = SPI_GPIO_NO_MISO,
- .mosi = FRITZ4020_GPIO_SHIFT_SER,
- .num_chipselect = 1,
-};
-
-static u8 fritz4020_ssr_initdata[] = {
- BIT(FRITZ4020_SSR_BIT_7) |
- BIT(FRITZ4020_SSR_BIT_6) |
- BIT(FRITZ4020_SSR_BIT_5) |
- BIT(FRITZ4020_SSR_BIT_4) |
- BIT(FRITZ4020_SSR_BIT_3) |
- BIT(FRITZ4020_SSR_BIT_2) |
- BIT(FRITZ4020_SSR_BIT_1)
-};
-
-static struct gen_74x164_chip_platform_data fritz4020_ssr_data = {
- .base = FRITZ4020_74HC_GPIO_BASE,
- .num_registers = ARRAY_SIZE(fritz4020_ssr_initdata),
- .init_data = fritz4020_ssr_initdata,
-};
-
-static struct platform_device fritz4020_spi_device = {
- .name = "spi_gpio",
- .id = 1,
- .dev = {
- .platform_data = &fritz4020_spi_data,
- },
-};
-
-static struct spi_board_info fritz4020_spi_info[] = {
- {
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 10000000,
- .modalias = "74x164",
- .platform_data = &fritz4020_ssr_data,
- .controller_data = (void *) 0x0,
- },
-};
-
-static struct mtd_partition fritz4020_flash_partitions[] = {
- {
- .name = "urlader",
- .offset = 0,
- .size = 0x0020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0020000,
- .size = 0x0EE0000,
- }, {
- .name = "tffs (1)",
- .offset = 0x0f00000,
- .size = 0x0080000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "tffs (2)",
- .offset = 0x0f80000,
- .size = 0x0080000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct flash_platform_data fritz4020_flash_data = {
- .parts = fritz4020_flash_partitions,
- .nr_parts = ARRAY_SIZE(fritz4020_flash_partitions),
-};
-
-static struct gpio_led fritz4020_leds_gpio[] __initdata = {
- {
- .name = "fritz4020:green:lan",
- .gpio = FRITZ4020_74HC_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "fritz4020:green:info",
- .gpio = FRITZ4020_74HC_GPIO_LED_INFO,
- .active_low = 1,
- }, {
- .name = "fritz4020:red:info",
- .gpio = FRITZ4020_74HC_GPIO_LED_INFO_RED,
- .active_low = 1,
- }, {
- .name = "fritz4020:green:power",
- .gpio = FRITZ4020_74HC_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "fritz4020:green:wlan",
- .gpio = FRITZ4020_74HC_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "fritz4020:green:wan",
- .gpio = FRITZ4020_74HC_GPIO_LED_WAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button fritz4020_gpio_keys[] __initdata = {
- {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = FRITZ4020_KEYS_DEBOUNCE_INTERVAL,
- .gpio = FRITZ4020_GPIO_BTN_WLAN,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = FRITZ4020_KEYS_DEBOUNCE_INTERVAL,
- .gpio = FRITZ4020_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static void __init fritz4020_setup(void) {
- u8 *urlader = (u8 *) KSEG1ADDR(0x1f000000);
- u8 wifi_mac[ETH_ALEN];
-
- ath79_register_m25p80(&fritz4020_flash_data);
-
- /* Initialize ethernet */
- ath79_extract_mac_reverse(urlader + FRTIZ4020_OFFSET_URLADER_WIFI_MAC_REVERSE, wifi_mac);
- ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
- QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
- ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, -1);
- ath79_init_mac(ath79_eth1_data.mac_addr, wifi_mac, -2);
-
- /* WAN port */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_register_eth(0);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(0);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-
- /* Initialize 2.4GHz WiFi */
- ath79_register_wmac_simple();
-
- /* Activate USB Power */
- gpio_request_one(FRITZ4020_74HC_GPIO_USB_RST,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-
- /* Initialize USB port */
- ath79_register_usb();
-
- /* Register LED shift-register */
- spi_register_board_info(fritz4020_spi_info,
- ARRAY_SIZE(fritz4020_spi_info));
- platform_device_register(&fritz4020_spi_device);
-
- /* Register GPIO buttons */
- ath79_register_gpio_keys_polled(-1, FRITZ4020_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(fritz4020_gpio_keys),
- fritz4020_gpio_keys);
-
- /* Register LEDs */
- ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz4020_leds_gpio),
- fritz4020_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_FRITZ4020, "FRITZ4020",
- "AVM FRITZ!Box 4020", fritz4020_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c
deleted file mode 100644
index 5bded81a4d..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz450e.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * AVM FRITZ!WLAN Repeater 450E board support
- *
- * Copyright (C) 2018 David Bauer <mail@david-bauer.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/ath9k_platform.h>
-#include <linux/etherdevice.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_data/mdio-gpio.h>
-#include <linux/platform_data/phy-at803x.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/74x164.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define FRITZ450E_GPIO_LED_POWER 14
-#define FRITZ450E_GPIO_LED_LAN 13
-#define FRITZ450E_GPIO_LED_WLAN 15
-#define FRITZ450E_GPIO_LED_RSSI2 16
-#define FRITZ450E_GPIO_LED_RSSI3 17
-#define FRITZ450E_GPIO_LED_RSSI4 18
-
-#define FRITZ450E_GPIO_BTN_WPS 4
-#define FRITZ450E_KEYS_POLL_INTERVAL 20 /* msecs */
-#define FRITZ450E_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ450E_KEYS_POLL_INTERVAL)
-
-#define FRITZ450E_PHY_ADDRESS 0
-#define FRITZ450E_GPIO_PHY_RESET 11
-#define FRITZ450E_GPIO_MDIO_CLK 12
-#define FRITZ450E_GPIO_MDIO_DATA 19
-
-#define FRITZ450E_OFFSET_URLADER_WIFI_MAC_REVERSE 0x1979
-
-
-static struct mtd_partition fritz450E_flash_partitions[] = {
- {
- .name = "urlader",
- .offset = 0,
- .size = 0x0020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0020000,
- .size = 0x0EE0000,
- }, {
- .name = "tffs (1)",
- .offset = 0x0f00000,
- .size = 0x0080000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "tffs (2)",
- .offset = 0x0f80000,
- .size = 0x0080000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct flash_platform_data fritz450E_flash_data = {
- .parts = fritz450E_flash_partitions,
- .nr_parts = ARRAY_SIZE(fritz450E_flash_partitions),
-};
-
-static struct gpio_led fritz450E_leds_gpio[] __initdata = {
- {
- .name = "fritz450e:green:lan",
- .gpio = FRITZ450E_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "fritz450e:green:rssi2",
- .gpio = FRITZ450E_GPIO_LED_RSSI2,
- .active_low = 1,
- }, {
- .name = "fritz450e:green:rssi3",
- .gpio = FRITZ450E_GPIO_LED_RSSI3,
- .active_low = 1,
- }, {
- .name = "fritz450e:green:rssi4",
- .gpio = FRITZ450E_GPIO_LED_RSSI4,
- .active_low = 1,
- }, {
- .name = "fritz450e:green:wlan",
- .gpio = FRITZ450E_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "fritz450e:green:power",
- .gpio = FRITZ450E_GPIO_LED_POWER,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button fritz450E_gpio_keys[] __initdata = {
- {
- .desc = "WPS Button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = FRITZ450E_KEYS_DEBOUNCE_INTERVAL,
- .gpio = FRITZ450E_GPIO_BTN_WPS,
- .active_low = 0,
- }
-};
-
-static struct at803x_platform_data fritz450E_at803x_data = {
- .disable_smarteee = 1,
- .has_reset_gpio = 1,
- .override_sgmii_aneg = 1,
- .reset_gpio = FRITZ450E_GPIO_PHY_RESET,
-};
-
-static struct mdio_board_info fritz450E_mdio_info[] = {
- {
- .bus_id = "ag71xx-mdio.1",
- .mdio_addr = FRITZ450E_PHY_ADDRESS,
- .platform_data = &fritz450E_at803x_data,
- },
-};
-
-static void __init fritz450E_setup(void) {
- u8 *urlader = (u8 *) KSEG1ADDR(0x1f000000);
- u8 wifi_mac[ETH_ALEN];
-
- ath79_register_m25p80(&fritz450E_flash_data);
-
- gpio_request_one(FRITZ450E_GPIO_MDIO_CLK, GPIOF_OUT_INIT_HIGH, "MDC Pull-UP");
- gpio_request_one(FRITZ450E_GPIO_MDIO_DATA, GPIOF_OUT_INIT_HIGH, "MDIO Pull-UP");
- gpio_request_one(FRITZ450E_GPIO_PHY_RESET, GPIOF_OUT_INIT_HIGH, "PHY reset");
-
- /* Register PHY device */
- mdiobus_register_board_info(fritz450E_mdio_info,
- ARRAY_SIZE(fritz450E_mdio_info));
-
- /* Initialize Ethernet */
- ath79_extract_mac_reverse(urlader + FRITZ450E_OFFSET_URLADER_WIFI_MAC_REVERSE, wifi_mac);
- ath79_init_mac(ath79_eth0_data.mac_addr, wifi_mac, -2);
-
- ath79_register_mdio(1, ~BIT(FRITZ450E_PHY_ADDRESS));
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.phy_mask = BIT(FRITZ450E_PHY_ADDRESS);
- ath79_eth0_data.enable_sgmii_fixup = 1;
- ath79_eth0_pll_data.pll_1000 = 0x03000000;
- ath79_eth0_pll_data.pll_100 = 0x00000101;
- ath79_eth0_pll_data.pll_10 = 0x00001313;
- ath79_register_eth(0);
-
- /* Initialize 2.4GHz WiFi */
- ath79_register_wmac_simple();
-
- /* Register GPIO buttons */
- ath79_register_gpio_keys_polled(-1, FRITZ450E_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(fritz450E_gpio_keys),
- fritz450E_gpio_keys);
-
- /* Register LEDs */
- ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz450E_leds_gpio),
- fritz450E_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_FRITZ450E, "FRITZ450E",
- "AVM FRITZ!WLAN Repeater 450E", fritz450E_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c
deleted file mode 100644
index 9febc7a839..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar150.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * GL_ar150 board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2013 alzhao <alzhao@gmail.com>
- * Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define GL_AR150_GPIO_LED_WLAN 0
-#define GL_AR150_GPIO_LED_LAN 13
-#define GL_AR150_GPIO_LED_WAN 15
-
-#define GL_AR150_GPIO_BIN_USB 6
-#define GL_AR150_GPIO_BTN_MANUAL 7
-#define GL_AR150_GPIO_BTN_AUTO 8
-#define GL_AR150_GPIO_BTN_RESET 11
-
-#define GL_AR150_KEYS_POLL_INTERVAL 20 /* msecs */
-#define GL_AR150_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR150_KEYS_POLL_INTERVAL)
-
-#define GL_AR150_MAC0_OFFSET 0x0000
-#define GL_AR150_MAC1_OFFSET 0x0000
-#define GL_AR150_CALDATA_OFFSET 0x1000
-#define GL_AR150_WMAC_MAC_OFFSET 0x0000
-
-static struct gpio_led gl_ar150_leds_gpio[] __initdata = {
- {
- .name = "gl-ar150:orange:wlan",
- .gpio = GL_AR150_GPIO_LED_WLAN,
- .active_low = 0,
- },
- {
- .name = "gl-ar150:green:lan",
- .gpio = GL_AR150_GPIO_LED_LAN,
- .active_low = 0,
- },
- {
- .name = "gl-ar150:green:wan",
- .gpio = GL_AR150_GPIO_LED_WAN,
- .active_low = 0,
- .default_state = 1,
- },
-};
-
-static struct gpio_keys_button gl_ar150_gpio_keys[] __initdata = {
- {
- .desc = "BTN_7",
- .type = EV_KEY,
- .code = BTN_7,
- .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR150_GPIO_BTN_MANUAL,
- .active_low = 0,
- },
- {
- .desc = "BTN_8",
- .type = EV_KEY,
- .code = BTN_8,
- .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR150_GPIO_BTN_AUTO,
- .active_low = 0,
- },
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GL_AR150_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR150_GPIO_BTN_RESET,
- .active_low = 0,
- },
-};
-
-static void __init gl_ar150_setup(void)
-{
-
- /* ART base address */
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- /* register flash. */
- ath79_register_m25p80(NULL);
-
- /* register gpio LEDs and keys */
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar150_leds_gpio),
- gl_ar150_leds_gpio);
- ath79_register_gpio_keys_polled(-1, GL_AR150_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gl_ar150_gpio_keys),
- gl_ar150_gpio_keys);
-
- /* enable usb */
- gpio_request_one(GL_AR150_GPIO_BIN_USB,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- /* register eth0 as WAN, eth1 as LAN */
- ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_AR150_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_AR150_MAC1_OFFSET, 0);
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- /* register wireless mac with cal data */
- ath79_register_wmac(art + GL_AR150_CALDATA_OFFSET, art + GL_AR150_WMAC_MAC_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_GL_AR150, "GL-AR150", "GL.iNet GL-AR150", gl_ar150_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300.c
deleted file mode 100644
index 1708d696b8..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Domino board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2013 alzhao <alzhao@gmail.com>
- * Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define GL_AR300_GPIO_LED_WLAN 13
-#define GL_AR300_GPIO_LED_WAN 14
-#define GL_AR300_GPIO_BTN_RESET 16
-
-
-#define GL_AR300_KEYS_POLL_INTERVAL 20 /* msecs */
-#define GL_AR300_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR300_KEYS_POLL_INTERVAL)
-
-#define GL_AR300_MAC0_OFFSET 0x0000
-#define GL_AR300_MAC1_OFFSET 0x0000
-#define GL_AR300_CALDATA_OFFSET 0x1000
-#define GL_AR300_WMAC_MAC_OFFSET 0x0000
-
-static struct gpio_led gl_ar300_leds_gpio[] __initdata = {
- {
- .name = "gl-ar300:wlan",
- .gpio = GL_AR300_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "gl-ar300:wan",
- .gpio = GL_AR300_GPIO_LED_WAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button gl_ar300_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GL_AR300_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR300_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init gl_ar300_setup(void)
-{
-
- /* ART base address */
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- /* register flash. */
- ath79_register_m25p80(NULL);
-
- /* register gpio LEDs and keys */
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar300_leds_gpio),
- gl_ar300_leds_gpio);
- ath79_register_gpio_keys_polled(-1, GL_AR300_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gl_ar300_gpio_keys),
- gl_ar300_gpio_keys);
-
- /* enable usb */
- ath79_register_usb();
- ath79_register_mdio(1, 0x0);
-
- /* register eth0 as WAN, eth1 as LAN */
- ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_AR300_MAC0_OFFSET, 0);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_AR300_MAC1_OFFSET, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-
- /* register wireless mac with cal data */
- ath79_register_wmac(art + GL_AR300_CALDATA_OFFSET, art + GL_AR300_WMAC_MAC_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_GL_AR300, "GL-AR300", "GL.iNet GL-AR300", gl_ar300_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
deleted file mode 100644
index d10a910129..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar300m.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * GLI AR300M(D) board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2013 alzhao <alzhao@gmail.com>
- * Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/pci.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define GL_AR300M_GPIO_LED_WLAN 14
-#define GL_AR300M_GPIO_LED_LAN 13
-#define GL_AR300M_GPIO_LED_SYSTEM 12
-#define GL_AR300M_GPIO_BTN_RESET 3
-#define GL_AR300M_GPIO_BTN_LEFT 0
-#define GL_AR300M_GPIO_BTN_RIGHT 1
-
-#define GL_AR300M_KEYS_POLL_INTERVAL 20 /* msecs */
-#define GL_AR300M_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR300M_KEYS_POLL_INTERVAL)
-
-#define GL_AR300M_MAC0_OFFSET 0
-#define GL_AR300M_MAC1_OFFSET 6
-#define GL_AR300M_WMAC_CALDATA_OFFSET 0x1000
-#define GL_AR300M_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led gl_ar300m_leds_gpio[] __initdata = {
- {
- .name = "gl-ar300m:red:wlan",
- .gpio = GL_AR300M_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "gl-ar300m:green:lan",
- .gpio = GL_AR300M_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "gl-ar300m:green:system",
- .gpio = GL_AR300M_GPIO_LED_SYSTEM,
- .active_low = 1,
- .default_state = 1,
- },
-};
-
-static struct gpio_keys_button gl_ar300m_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR300M_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "button right",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR300M_GPIO_BTN_LEFT,
- .active_low = 0,
- },
- {
- .desc = "button left",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = GL_AR300M_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR300M_GPIO_BTN_RIGHT,
- .active_low = 0,
- },
-};
-
-static struct spi_board_info gl_ar300m_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = NULL,
- },
- {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 25000000,
- .modalias = "ath79-spinand",
- .platform_data = NULL,
- }
-};
-
-static struct ath79_spi_platform_data gl_ar300m_spi_data = {
- .bus_num = 0,
- .num_chipselect = 2,
-};
-
-static void __init gl_ar300m_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
- ath79_register_spi(&gl_ar300m_spi_data, gl_ar300m_spi_info, 2);
-
- /* register gpio LEDs and keys */
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar300m_leds_gpio),
- gl_ar300m_leds_gpio);
- ath79_register_gpio_keys_polled(-1, GL_AR300M_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gl_ar300m_gpio_keys),
- gl_ar300m_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
-
- /* WAN */
- ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR300M_MAC0_OFFSET, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
-
- /* LAN */
- ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR300M_MAC1_OFFSET, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-
- ath79_init_mac(tmpmac, art + GL_AR300M_WMAC_CALDATA_OFFSET + 2, 0);
- ath79_register_wmac(art + GL_AR300M_WMAC_CALDATA_OFFSET, tmpmac);
-
- /* enable usb */
- ath79_register_usb();
- /* enable pci */
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_GL_AR300M, "GL-AR300M", "GL.iNet GL-AR300M", gl_ar300m_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c
deleted file mode 100644
index 9ee6e29c02..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * GL.iNet GL-AR750 board support
- *
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define GL_AR750_GPIO_LED_POWER 12
-#define GL_AR750_GPIO_LED_WLAN2G 14
-#define GL_AR750_GPIO_LED_WLAN5G 13
-
-#define GL_AR750_GPIO_BTN_RESET 3
-#define GL_AR750_GPIO_BTN_SW1 0
-
-#define GL_AR750_GPIO_I2C_SCL 16
-#define GL_AR750_GPIO_I2C_SDA 17
-
-#define GL_AR750_GPIO_USB_POWER 2
-
-#define GL_AR750_KEYS_POLL_INTERVAL 20
-#define GL_AR750_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR750_KEYS_POLL_INTERVAL)
-
-#define GL_AR750_MAC0_OFFSET 0
-#define GL_AR750_WMAC2G_CALDATA_OFFSET 0x1000
-#define GL_AR750_WMAC5G_CALDATA_OFFSET 0x5000
-
-static struct gpio_led gl_ar750_leds_gpio[] __initdata = {
- {
- .name = "gl-ar750:white:power",
- .gpio = GL_AR750_GPIO_LED_POWER,
- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
- .active_low = 1,
- }, {
- .name = "gl-ar750:white:wlan2g",
- .gpio = GL_AR750_GPIO_LED_WLAN2G,
- .active_low = 1,
- }, {
- .name = "gl-ar750:white:wlan5g",
- .gpio = GL_AR750_GPIO_LED_WLAN5G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button gl_ar750_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR750_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "sw1",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = GL_AR750_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR750_GPIO_BTN_SW1,
- .active_low = 1,
- },
-};
-
-static struct i2c_gpio_platform_data gl_ar750_i2c_gpio_data = {
- .sda_pin = GL_AR750_GPIO_I2C_SDA,
- .scl_pin = GL_AR750_GPIO_I2C_SCL,
-};
-
-static struct platform_device gl_ar750_i2c_gpio = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &gl_ar750_i2c_gpio_data,
- },
-};
-
-static void __init gl_ar750_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1f050000);
-
- ath79_register_m25p80(NULL);
-
- ath79_setup_ar933x_phy4_switch(false, false);
- ath79_register_mdio(0, 0x0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = 0xfc;
-
- /* WAN */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 0);
- ath79_register_eth(0);
-
- /* LAN */
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_init_mac(ath79_eth1_data.mac_addr, art + GL_AR750_MAC0_OFFSET, 1);
- ath79_register_eth(1);
-
- /* Disable JTAG (enables GPIO0-3) */
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar750_leds_gpio),
- gl_ar750_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, GL_AR750_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gl_ar750_gpio_keys),
- gl_ar750_gpio_keys);
-
- gpio_request_one(GL_AR750_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-
- platform_device_register(&gl_ar750_i2c_gpio);
-
- ath79_register_usb();
-
- ath79_register_wmac(art + GL_AR750_WMAC2G_CALDATA_OFFSET, NULL);
-
- ap91_pci_init(art + GL_AR750_WMAC5G_CALDATA_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_GL_AR750, "GL-AR750", "GL.iNet GL-AR750",
- gl_ar750_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750s.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750s.c
deleted file mode 100644
index cc5d759273..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-ar750s.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * GL.iNet GL-AR750S board support
- *
- * Copyright (C) 2018 luochongjun <luochongjun@gl-inet.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/etherdevice.h>
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/irq.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include <linux/platform_data/phy-at803x.h>
-#include <linux/ar8216_platform.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-
-#define GL_AR750S_KEYS_POLL_INTERVAL 20
-#define GL_AR750S_KEYS_DEBOUNCE_INTERVAL (3 * GL_AR750S_KEYS_POLL_INTERVAL)
-
-
-#define GL_AR750S_GPIO_LED_WLAN2G 19
-#define GL_AR750S_GPIO_LED_WLAN5G 20
-#define GL_AR750S_GPIO_LED_POWER 1
-#define GL_AR750S_GPIO_USB_POWER 7
-
-#define GL_AR750S_GPIO_BTN_RESET 2
-#define GL_AR750S_GPIO_BTN_RIGHT 8
-
-#define GL_AR750S_MAC0_OFFSET 0x0000
-#define GL_AR750S_WMAC_CALDATA_OFFSET 0x1000
-#define GL_AR750S_PCI_CALDATA_OFFSET 0x5000
-
-#define GL_AR750S_GPIO_I2C_SDA 5
-#define GL_AR750S_GPIO_I2C_SCL 21
-
-
-
-static struct spi_board_info gl_ar750s_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = NULL,
- },
-};
-
-static struct ath79_spi_platform_data gl_ar750s_spi_data = {
- .bus_num = 0,
- .num_chipselect = 2,
-};
-
-static struct gpio_led gl_ar750s_leds_gpio[] __initdata = {
- {
- .name = "gl-ar750s:green:power",
- .gpio = GL_AR750S_GPIO_LED_POWER,
- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
- .active_low = 1,
- },{
- .name = "gl-ar750s:green:usbpower",
- .gpio = GL_AR750S_GPIO_USB_POWER,
- .active_low = 1,
- },{
- .name = "gl-ar750s:green:wlan2g",
- .gpio = GL_AR750S_GPIO_LED_WLAN2G,
- .active_low = 1,
- },{
- .name = "gl-ar750s:green:wlan5g",
- .gpio = GL_AR750S_GPIO_LED_WLAN5G,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button gl_ar750s_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GL_AR750S_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR750S_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "right",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = GL_AR750S_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_AR750S_GPIO_BTN_RIGHT,
- .active_low = 1,
- },
-};
-
-static struct i2c_gpio_platform_data gl_ar750s_i2c_gpio_data = {
- .sda_pin = GL_AR750S_GPIO_I2C_SDA,
- .scl_pin = GL_AR750S_GPIO_I2C_SCL,
-};
-
-static struct platform_device gl_ar750s_i2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &gl_ar750s_i2c_gpio_data,
- }
-
-};
-
-static struct ar8327_pad_cfg gl_ar750s_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data gl_ar750s_ar8327_data = {
- .pad0_cfg = &gl_ar750s_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-
-static struct mdio_board_info gl_ar750s_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &gl_ar750s_ar8327_data,
- },
-};
-
-static void __init gl_ar750s_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1f050000);
-
- ath79_register_spi(&gl_ar750s_spi_data, gl_ar750s_spi_info, 1);
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- eeprom + GL_AR750S_MAC0_OFFSET, 0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_mask = BIT(0);
-
- mdiobus_register_board_info(gl_ar750s_mdio0_info,
- ARRAY_SIZE(gl_ar750s_mdio0_info));
-
- ath79_register_mdio(0, 0x00);
- ath79_register_eth(0);
-
-
- ath79_register_usb();
-
-
- ath79_register_wmac(eeprom + GL_AR750S_WMAC_CALDATA_OFFSET, NULL);
-
-
- ap91_pci_init(eeprom + GL_AR750S_PCI_CALDATA_OFFSET, NULL);
-
- platform_device_register(&gl_ar750s_i2c_gpio_device);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_ar750s_leds_gpio),
- gl_ar750s_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, GL_AR750S_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gl_ar750s_gpio_keys),
- gl_ar750s_gpio_keys);
-}
-
-
-MIPS_MACHINE(ATH79_MACH_GL_AR750S, "GL-AR750S", "GL-AR750S",
- gl_ar750s_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c
deleted file mode 100644
index 4ff8ff637e..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-domino.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Domino board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2013 alzhao <alzhao@gmail.com>
- * Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define DOMINO_GPIO_LED_WLAN 0
-#define DOMINO_GPIO_LED_WAN 17
-#define DOMINO_GPIO_LED_USB 1
-#define DOMINO_GPIO_LED_LAN1 13
-#define DOMINO_GPIO_LED_LAN2 14
-#define DOMINO_GPIO_LED_LAN3 15
-#define DOMINO_GPIO_LED_LAN4 16
-#define DOMINO_GPIO_LED_SYS 27
-#define DOMINO_GPIO_LED_WPS 26
-#define DOMINO_GPIO_USB_POWER 6
-
-#define DOMINO_GPIO_BTN_RESET 11
-#define DOMINO_GPIO_BTN_WPS 20
-
-#define DOMINO_KEYS_POLL_INTERVAL 20 /* msecs */
-#define DOMINO_KEYS_DEBOUNCE_INTERVAL (3 * DOMINO_KEYS_POLL_INTERVAL)
-
-#define DOMINO_MAC0_OFFSET 0x0000
-#define DOMINO_MAC1_OFFSET 0x0000
-#define DOMINO_CALDATA_OFFSET 0x1000
-#define DOMINO_WMAC_MAC_OFFSET 0x0000
-
-static struct gpio_led domino_leds_gpio[] __initdata = {
- {
- .name = "gl-domino:blue:wlan",
- .gpio = DOMINO_GPIO_LED_WLAN,
- .active_low = 0,
- },
- {
- .name = "gl-domino:red:wan",
- .gpio = DOMINO_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "gl-domino:white:usb",
- .gpio = DOMINO_GPIO_LED_USB,
- .active_low = 0,
- },
- {
- .name = "gl-domino:green:lan1",
- .gpio = DOMINO_GPIO_LED_LAN1,
- .active_low = 0,
- },
- {
- .name = "gl-domino:yellow:wps",
- .gpio = DOMINO_GPIO_LED_WPS,
- .active_low = 1,
- },
- {
- .name = "gl-domino:orange:sys",
- .gpio = DOMINO_GPIO_LED_SYS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button domino_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = DOMINO_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DOMINO_GPIO_BTN_RESET,
- .active_low = 0,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = DOMINO_KEYS_DEBOUNCE_INTERVAL,
- .gpio = DOMINO_GPIO_BTN_WPS,
- .active_low = 0,
- }
-};
-
-static void __init domino_setup(void)
-{
-
- /* ART base address */
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- /* register flash. */
- ath79_register_m25p80(NULL);
-
- /* register gpio LEDs and keys */
- ath79_register_leds_gpio(-1, ARRAY_SIZE(domino_leds_gpio),
- domino_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DOMINO_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(domino_gpio_keys),
- domino_gpio_keys);
-
- gpio_request_one(DOMINO_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- /* enable usb */
- ath79_register_usb();
-
- /* register eth0 as WAN, eth1 as LAN */
- ath79_init_mac(ath79_eth0_data.mac_addr, art+DOMINO_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art+DOMINO_MAC1_OFFSET, 0);
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- /* register wireless mac with cal data */
- ath79_register_wmac(art + DOMINO_CALDATA_OFFSET, art + DOMINO_WMAC_MAC_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_GL_DOMINO, "DOMINO", "Domino Pi", domino_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-inet.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-inet.c
deleted file mode 100644
index 6f603d9579..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-inet.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * GL-CONNECT iNet board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2013 alzhao <alzhao@gmail.com>
- * Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define GL_INET_GPIO_LED_WLAN 0
-#define GL_INET_GPIO_LED_LAN 13
-#define GL_INET_GPIO_BTN_RESET 11
-
-#define GL_INET_KEYS_POLL_INTERVAL 20 /* msecs */
-#define GL_INET_KEYS_DEBOUNCE_INTERVAL (3 * GL_INET_KEYS_POLL_INTERVAL)
-
-static const char * gl_inet_part_probes[] = {
- "tp-link", /* dont change, this will use tplink parser */
- NULL ,
-};
-
-static struct flash_platform_data gl_inet_flash_data = {
- .part_probes = gl_inet_part_probes,
-};
-
-static struct gpio_led gl_inet_leds_gpio[] __initdata = {
- {
- .name = "gl-inet:red:wlan",
- .gpio = GL_INET_GPIO_LED_WLAN,
- .active_low = 0,
- },
- {
- .name = "gl-inet:green:lan",
- .gpio = GL_INET_GPIO_LED_LAN,
- .active_low = 0,
- .default_state = 1,
- },
-};
-
-static struct gpio_keys_button gl_inet_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GL_INET_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_INET_GPIO_BTN_RESET,
- .active_low = 0,
- }
-};
-
-static void __init gl_inet_setup(void)
-{
- /* get the mac address which is stored in the 1st 64k uboot MTD */
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-
- /* get the art address, which is the last 64K. By using
- 0x1fff1000, it doesn't matter it is 4M, 8M or 16M flash */
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- /* register flash. MTD will use tp-link parser to parser MTD */
- ath79_register_m25p80(&gl_inet_flash_data);
-
- /* register gpio LEDs and keys */
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_inet_leds_gpio),
- gl_inet_leds_gpio);
- ath79_register_gpio_keys_polled(-1, GL_INET_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gl_inet_gpio_keys),
- gl_inet_gpio_keys);
-
- /* enable usb */
- ath79_register_usb();
-
- /* register eth0 as WAN, eth1 as LAN */
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_eth(1);
-
- /* register wireless mac with cal data */
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_GL_INET, "GL-INET", "GL-CONNECT INET v1",
- gl_inet_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
deleted file mode 100644
index a5c68ed65a..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-mifi.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Mifi board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2013 alzhao <alzhao@gmail.com>
- * Copyright (C) 2014 Michel Stempin <michel.stempin@wanadoo.fr>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define GL_MIFI_GPIO_LED_WAN 27
-#define GL_MIFI_GPIO_LED_LAN 16
-#define GL_MIFI_GPIO_LED_WLAN 1
-#define GL_MIFI_GPIO_LED_NET 0
-#define GL_MIFI_GPIO_LED_3GCONTROL 7
-
-#define GL_MIFI_GPIO_BTN_RESET 11
-
-#define GL_MIFI_KEYS_POLL_INTERVAL 20 /* msecs */
-#define GL_MIFI_KEYS_DEBOUNCE_INTERVAL (3 * GL_MIFI_KEYS_POLL_INTERVAL)
-
-#define GL_MIFI_MAC0_OFFSET 0x0000
-#define GL_MIFI_MAC1_OFFSET 0x0000
-#define GL_MIFI_CALDATA_OFFSET 0x1000
-#define GL_MIFI_WMAC_MAC_OFFSET 0x0000
-
-static struct gpio_led gl_mifi_leds_gpio[] __initdata = {
- {
- .name = "gl-mifi:green:wan",
- .gpio = GL_MIFI_GPIO_LED_WAN,
- .active_low = 0,
- },
- {
- .name = "gl-mifi:green:lan",
- .gpio = GL_MIFI_GPIO_LED_LAN,
- .active_low = 0,
- },
- {
- .name = "gl-mifi:green:wlan",
- .gpio = GL_MIFI_GPIO_LED_WLAN,
- .active_low = 0,
- },
- {
- .name = "gl-mifi:green:net",
- .gpio = GL_MIFI_GPIO_LED_NET,
- .active_low = 0,
- },
- {
- .name = "gl-mifi:green:3gcontrol",
- .gpio = GL_MIFI_GPIO_LED_3GCONTROL,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button gl_mifi_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GL_MIFI_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_MIFI_GPIO_BTN_RESET,
- .active_low = 0,
- },
-};
-
-static void __init gl_mifi_setup(void)
-{
-
- /* ART base address */
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- /* register flash. */
- ath79_register_m25p80(NULL);
-
- /* register gpio LEDs and keys */
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_mifi_leds_gpio),
- gl_mifi_leds_gpio);
- ath79_register_gpio_keys_polled(-1, GL_MIFI_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gl_mifi_gpio_keys),
- gl_mifi_gpio_keys);
-
- /* enable usb */
- ath79_register_usb();
-
- /* register eth0 as WAN, eth1 as LAN */
- ath79_init_mac(ath79_eth0_data.mac_addr, art+GL_MIFI_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art+GL_MIFI_MAC1_OFFSET, 0);
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- /* register wireless mac with cal data */
- ath79_register_wmac(art + GL_MIFI_CALDATA_OFFSET, art + GL_MIFI_WMAC_MAC_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_GL_MIFI, "GL-MIFI", "GL.iNet GL-MIFI", gl_mifi_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c
deleted file mode 100644
index 6cc27e1ada..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gl-usb150.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * GL.iNet GL-USB150 board support
- *
- * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define GL_USB150_GPIO_LED_POWER 13
-#define GL_USB150_GPIO_LED_WLAN 0
-#define GL_USB150_GPIO_LAN_RESET 7
-#define GL_USB150_GPIO_BTN_RESET 11
-
-#define GL_USB150_KEYS_POLL_INTERVAL 20
-#define GL_USB150_KEYS_DEBOUNCE_INTERVAL \
- (3 * GL_USB150_KEYS_POLL_INTERVAL)
-
-#define GL_USB150_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led gl_usb150_leds_gpio[] __initdata = {
- {
- .name = "gl-usb150:green:power",
- .gpio = GL_USB150_GPIO_LED_POWER,
- .active_low = 0,
- }, {
- .name = "gl-usb150:green:wlan",
- .gpio = GL_USB150_GPIO_LED_WLAN,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button gl_usb150_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GL_USB150_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GL_USB150_GPIO_BTN_RESET,
- .active_low = 0,
- },
-};
-
-static void __init gl_usb150_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- /* LAN (PHY4 connected with Realtek RTL8152B) */
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gl_usb150_leds_gpio),
- gl_usb150_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, GL_USB150_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gl_usb150_gpio_keys),
- gl_usb150_gpio_keys);
-
- gpio_request_one(GL_USB150_GPIO_LAN_RESET,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "LAN reset");
-
- ath79_register_wmac(art + GL_USB150_WMAC_CALDATA_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_GL_USB150, "GL-USB150", "GL.iNet GL-USB150",
- gl_usb150_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-minibox-v32.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-minibox-v32.c
deleted file mode 100644
index 469c6f39ea..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-minibox-v32.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * Atheros GS_MINIBOX_V3.2 reference board support
- *
- * Copyright (c) 2018 OpenWRT.org
- * Copyright (c) 2013 The Linux Foundation. All rights reserved.
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define GS_MINIBOX_V3_GPIO_LED_STATUS 14
-#define GS_MINIBOX_V3_GPIO_BTN_RST 17
-#define GS_MINIBOX_V3_KEYS_POLL_INTERVAL 20 /* msecs */
-#define GS_MINIBOX_V3_KEYS_DEBOUNCE_INTERVAL (3 * GS_MINIBOX_V3_KEYS_POLL_INTERVAL)
-#define GS_MINIBOX_V3_MAC0_OFFSET 0
-#define GS_MINIBOX_V3_MAC1_OFFSET 6
-#define GS_MINIBOX_V3_WMAC_CALDATA_OFFSET 0x1000
-
-static const char *gs_minibox_v3_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data gs_minibox_v3_flash_data = {
- .part_probes = gs_minibox_v3_part_probes,
-};
-
-static struct gpio_led gs_minibox_v3_leds_gpio[] __initdata = {
- {
- .name = "minibox_v3.2:green:system",
- .gpio = GS_MINIBOX_V3_GPIO_LED_STATUS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button gs_minibox_v3_gpio_keys[] __initdata = {
- {
- .desc = "reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GS_MINIBOX_V3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GS_MINIBOX_V3_GPIO_BTN_RST,
- .active_low = 1,
- },
-};
-
-static void __init gs_minibox_v3_gpio_led_setup(void)
-{
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_minibox_v3_leds_gpio),
- gs_minibox_v3_leds_gpio);
- ath79_register_gpio_keys_polled(-1, GS_MINIBOX_V3_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gs_minibox_v3_gpio_keys),
- gs_minibox_v3_gpio_keys);
-}
-
-static void __init gs_minibox_v3_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(&gs_minibox_v3_flash_data);
- gs_minibox_v3_gpio_led_setup();
-
- ath79_register_usb();
-
- ath79_register_wmac(art + GS_MINIBOX_V3_WMAC_CALDATA_OFFSET, NULL);
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + GS_MINIBOX_V3_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art + GS_MINIBOX_V3_MAC1_OFFSET, 0);
-
- /* WAN port */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_GS_MINIBOX_V32, "MINIBOX-V3.2", "Minibox V3.2",
- gs_minibox_v3_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v1.c
deleted file mode 100644
index d424e0f111..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v1.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * GainStrong Oolite/MiniBox V1.0 boards support
- *
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "dev-usb.h"
-
-#define GS_MINIBOX_V1_GPIO_BTN_RESET 11
-#define GS_MINIBOX_V1_GPIO_LED_SYSTEM 1
-
-#define GS_OOLITE_V1_GPIO_BTN6 6
-#define GS_OOLITE_V1_GPIO_BTN7 7
-#define GS_OOLITE_V1_GPIO_BTN_RESET 11
-#define GS_OOLITE_V1_GPIO_LED_SYSTEM 27
-
-#define GS_KEYS_POLL_INTERVAL 20 /* msecs */
-#define GS_KEYS_DEBOUNCE_INTERVAL (3 * GS_KEYS_POLL_INTERVAL)
-
-static const char *gs_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data gs_flash_data = {
- .part_probes = gs_part_probes,
-};
-
-static struct gpio_led gs_minibox_v1_leds_gpio[] __initdata = {
- {
- .name = "minibox-v1:green:system",
- .gpio = GS_MINIBOX_V1_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_led gs_oolite_v1_leds_gpio[] __initdata = {
- {
- .name = "oolite-v1:red:system",
- .gpio = GS_OOLITE_V1_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button gs_minibox_v1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GS_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GS_MINIBOX_V1_GPIO_BTN_RESET,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button gs_oolite_v1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GS_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GS_OOLITE_V1_GPIO_BTN_RESET,
- .active_low = 0,
- }, {
- .desc = "BTN_6",
- .type = EV_KEY,
- .code = BTN_6,
- .debounce_interval = GS_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GS_OOLITE_V1_GPIO_BTN6,
- .active_low = 0,
- }, {
- .desc = "BTN_7",
- .type = EV_KEY,
- .code = BTN_7,
- .debounce_interval = GS_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GS_OOLITE_V1_GPIO_BTN7,
- .active_low = 0,
- },
-};
-
-static void __init gs_common_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-
- ath79_register_usb();
-
- ath79_register_m25p80(&gs_flash_data);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_register_wmac(art, mac);
-}
-
-static void __init gs_minibox_v1_setup(void)
-{
- gs_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_minibox_v1_leds_gpio),
- gs_minibox_v1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, GS_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gs_minibox_v1_gpio_keys),
- gs_minibox_v1_gpio_keys);
-}
-
-static void __init gs_oolite_v1_setup(void)
-{
- gs_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_oolite_v1_leds_gpio),
- gs_oolite_v1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, GS_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gs_oolite_v1_gpio_keys),
- gs_oolite_v1_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_GS_MINIBOX_V1, "MINIBOX-V1", "GainStrong MiniBox V1.0",
- gs_minibox_v1_setup);
-
-MIPS_MACHINE(ATH79_MACH_GS_OOLITE_V1, "OOLITE-V1", "GainStrong Oolite V1.0",
- gs_oolite_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v5-2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v5-2.c
deleted file mode 100644
index 64dc4f3345..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-gs-oolite-v5-2.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * GainStrong Oolite V5.2 module and development board support
- *
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define GS_OOLITE_V5_2_DEV_GPIO_BTN_RESET 17
-#define GS_OOLITE_V5_2_DEV_GPIO_LED_SYSTEM 13
-
-#define GS_KEYS_POLL_INTERVAL 20 /* msec */
-#define GS_KEYS_DEBOUNCE_INTERVAL (3 * GS_KEYS_POLL_INTERVAL)
-
-#define GS_OOLITE_V5_2_WMAC_CALDATA_OFFSET 0x1000
-
-static const char *gs_oolite_v5_2_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data gs_oolite_v5_2_flash_data = {
- .part_probes = gs_oolite_v5_2_part_probes,
-};
-
-static struct gpio_led gs_oolite_v5_2_dev_gpio_leds[] __initdata = {
- {
- .name = "oolite-v5.2-dev:blue:system",
- .gpio = GS_OOLITE_V5_2_DEV_GPIO_LED_SYSTEM,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button gs_oolite_v5_2_dev_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = GS_KEYS_DEBOUNCE_INTERVAL,
- .gpio = GS_OOLITE_V5_2_DEV_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init gs_oolite_v5_2_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(&gs_oolite_v5_2_flash_data);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask |= BIT(4);
-
- /* LAN */
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_init_mac(ath79_eth1_data.mac_addr, art + 6, 0);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
- ath79_register_eth(0);
-
- ath79_register_pci();
- ath79_register_usb();
- ath79_register_wmac(art + GS_OOLITE_V5_2_WMAC_CALDATA_OFFSET, NULL);
-}
-
-static void __init gs_oolite_v5_2_dev_setup(void)
-{
- gs_oolite_v5_2_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(gs_oolite_v5_2_dev_gpio_leds),
- gs_oolite_v5_2_dev_gpio_leds);
-
- ath79_register_gpio_keys_polled(-1, GS_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(gs_oolite_v5_2_dev_gpio_keys),
- gs_oolite_v5_2_dev_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_GS_OOLITE_V5_2, "OOLITE-V5-2",
- "GainStrong Oolite V5.2", gs_oolite_v5_2_setup);
-
-MIPS_MACHINE(ATH79_MACH_GS_OOLITE_V5_2_DEV, "OOLITE-V5-2-DEV",
- "GainStrong Oolite V5.2-Dev", gs_oolite_v5_2_dev_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-hiveap-121.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-hiveap-121.c
deleted file mode 100644
index 5cbb2054f7..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-hiveap-121.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Aerohive HiveAP 121 board support
- *
- * Copyright (C) 2017 Chris Blake <chrisrblake93@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/platform/ar934x_nfc.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "dev-ap9x-pci.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define HIVEAP_121_GPIO_LED_ORANGE 14
-#define HIVEAP_121_GPIO_LED_WHITE 21
-#define HIVEAP_121_GPIO_I2C_SCL 12
-#define HIVEAP_121_GPIO_I2C_SDA 13
-#define HIVEAP_121_GPIO_XLNA0 20
-#define HIVEAP_121_GPIO_XLNA1 19
-#define HIVEAP_121_GPIO_USB_POWER 15
-
-#define HIVEAP_121_GPIO_BTN_RESET 4
-#define HIVEAP_121_KEYS_POLL_INTERVAL 20 /* msecs */
-#define HIVEAP_121_KEYS_DEBOUNCE_INTERVAL \
- (3 * HIVEAP_121_KEYS_POLL_INTERVAL)
-
-#define HIVEAP_121_MAC_OFFSET 0x90000
-
-#define HIVEAP_121_LAN_PHYADDR 0
-
-static struct gpio_led hiveap_121_leds_gpio[] __initdata = {
- {
- .name = "hiveap-121:orange:power",
- .gpio = HIVEAP_121_GPIO_LED_ORANGE,
- .active_low = 1,
- }, {
- .name = "hiveap-121:white:power",
- .gpio = HIVEAP_121_GPIO_LED_WHITE,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button hiveap_121_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = HIVEAP_121_KEYS_DEBOUNCE_INTERVAL,
- .gpio = HIVEAP_121_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct i2c_gpio_platform_data hiveap_121_i2c_gpio_data = {
- .sda_pin = HIVEAP_121_GPIO_I2C_SDA,
- .scl_pin = HIVEAP_121_GPIO_I2C_SCL,
-};
-
-static struct platform_device hiveap_121_i2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &hiveap_121_i2c_gpio_data,
- }
-};
-
-static struct i2c_board_info tpm_i2c_info[] __initdata = {
- {
- I2C_BOARD_INFO("tpm_i2c_atmel", 0x29),
- }
-};
-
-static void __init hiveap_121_setup(void)
-{
- u8 *base = (u8 *) KSEG1ADDR(0x1f000000);
- u8 wlan0_mac[ETH_ALEN];
- u8 wlan1_mac[ETH_ALEN];
-
- /* NAND */
- ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
- ath79_register_nfc();
-
- /* SPI */
- ath79_register_m25p80(NULL);
-
- /* MDIO Interface */
- ath79_register_mdio(0, 0x0);
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_RXD_DELAY |
- AR934X_ETH_CFG_RDV_DELAY);
-
- /* GMAC0 is connected to the RGMII interface to an Atheros AR8035-A */
- ath79_init_mac(ath79_eth0_data.mac_addr,
- base + HIVEAP_121_MAC_OFFSET, 0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(HIVEAP_121_LAN_PHYADDR);
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_eth0_pll_data.pll_100 = 0x00000101;
- ath79_eth0_pll_data.pll_10 = 0x00001313;
- ath79_register_eth(0);
-
- /* i2c */
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
- platform_device_register(&hiveap_121_i2c_gpio_device);
-
- /* TPM */
- i2c_register_board_info(0, tpm_i2c_info, ARRAY_SIZE(tpm_i2c_info));
-
- /* LEDs and Buttons */
- ath79_register_leds_gpio(-1, ARRAY_SIZE(hiveap_121_leds_gpio),
- hiveap_121_leds_gpio);
- ath79_register_gpio_keys_polled(-1, HIVEAP_121_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(hiveap_121_gpio_keys),
- hiveap_121_gpio_keys);
-
- /* USB */
- gpio_request_one(HIVEAP_121_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- /* XLNA - SoC Wireless */
- ath79_wmac_set_ext_lna_gpio(0, HIVEAP_121_GPIO_XLNA0);
- ath79_wmac_set_ext_lna_gpio(1, HIVEAP_121_GPIO_XLNA1);
-
- /* SoC Wireless */
- ath79_init_mac(wlan0_mac, base + HIVEAP_121_MAC_OFFSET, 1);
- ath79_register_wmac(NULL, wlan0_mac); /* Caldata in OTP */
-
- /* PCIe Wireless */
- ath79_init_mac(wlan1_mac, base + HIVEAP_121_MAC_OFFSET, 2);
- ap91_pci_init(NULL, wlan1_mac); /* Caldata in OTP */
-}
-
-MIPS_MACHINE(ATH79_MACH_HIVEAP_121, "HiveAP-121", "Aerohive HiveAP-121",
- hiveap_121_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-hiwifi-hc6361.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-hiwifi-hc6361.c
deleted file mode 100644
index 6600595c05..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-hiwifi-hc6361.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * HiWiFi HC6361 board support
- *
- * Copyright (C) 2012-2013 eric
- * Copyright (C) 2014 Yousong Zhou <yszhou4tech@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/proc_fs.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define HIWIFI_HC6361_GPIO_LED_WLAN_2P4 0 /* 2.4G WLAN LED */
-#define HIWIFI_HC6361_GPIO_LED_SYSTEM 1 /* System LED */
-#define HIWIFI_HC6361_GPIO_LED_INTERNET 27 /* Internet LED */
-
-#define HIWIFI_HC6361_GPIO_USBPOWER 20 /* USB power control */
-#define HIWIFI_HC6361_GPIO_BTN_RST 11 /* Reset button */
-
-#define HIWIFI_HC6361_KEYS_POLL_INTERVAL 20 /* msecs */
-#define HIWIFI_HC6361_KEYS_DEBOUNCE_INTERVAL \
- (3 * HIWIFI_HC6361_KEYS_POLL_INTERVAL)
-
-static struct gpio_led hiwifi_leds_gpio[] __initdata = {
- {
- .name = "hiwifi:blue:wlan-2p4",
- .gpio = HIWIFI_HC6361_GPIO_LED_WLAN_2P4,
- .active_low = 1,
- }, {
- .name = "hiwifi:blue:system",
- .gpio = HIWIFI_HC6361_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "hiwifi:blue:internet",
- .gpio = HIWIFI_HC6361_GPIO_LED_INTERNET,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button hiwifi_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = HIWIFI_HC6361_KEYS_DEBOUNCE_INTERVAL,
- .gpio = HIWIFI_HC6361_GPIO_BTN_RST,
- .active_low = 1,
- }
-};
-
-static void __init get_mac_from_bdinfo(u8 *mac, void *bdinfo)
-{
- if (sscanf(bdinfo, "fac_mac = %2hhx:%2hhx:%2hhx:%2hhx:%2hhx:%2hhx",
- &mac[0], &mac[1], &mac[2], &mac[3],
- &mac[4], &mac[5]) == 6) {
- return;
- }
-
- printk(KERN_WARNING "Parsing MAC address failed.\n");
- memcpy(mac, "\x00\xba\xbe\x00\x00\x00", 6);
-}
-
-static void __init hiwifi_hc6361_setup(void)
-{
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac[6];
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_m25p80(NULL);
- ath79_gpio_function_enable(
- AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(hiwifi_leds_gpio),
- hiwifi_leds_gpio);
- ath79_register_gpio_keys_polled(-1, HIWIFI_HC6361_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(hiwifi_gpio_keys),
- hiwifi_gpio_keys);
- gpio_request_one(HIWIFI_HC6361_GPIO_USBPOWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- get_mac_from_bdinfo(mac, (void *) KSEG1ADDR(0x1f010180));
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_HIWIFI_HC6361, "HiWiFi-HC6361",
- "HiWiFi HC6361", hiwifi_hc6361_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-hornet-ub.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-hornet-ub.c
deleted file mode 100644
index 1d21424585..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-hornet-ub.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * ALFA NETWORK Hornet-UB board support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define HORNET_UB_GPIO_LED_WLAN 0
-#define HORNET_UB_GPIO_LED_USB 1
-#define HORNET_UB_GPIO_LED_LAN 13
-#define HORNET_UB_GPIO_LED_WAN 17
-#define HORNET_UB_GPIO_LED_WPS 27
-#define HORNET_UB_GPIO_EXT_LNA 28
-
-#define HORNET_UB_GPIO_BTN_RESET 12
-#define HORNET_UB_GPIO_BTN_WPS 11
-
-#define HORNET_UB_GPIO_USB_POWER 26
-
-#define HORNET_UB_KEYS_POLL_INTERVAL 20 /* msecs */
-#define HORNET_UB_KEYS_DEBOUNCE_INTERVAL (3 * HORNET_UB_KEYS_POLL_INTERVAL)
-
-#define HORNET_UB_MAC0_OFFSET 0x0000
-#define HORNET_UB_MAC1_OFFSET 0x0006
-#define HORNET_UB_CALDATA_OFFSET 0x1000
-
-static struct gpio_led hornet_ub_leds_gpio[] __initdata = {
- {
- .name = "alfa:blue:lan",
- .gpio = HORNET_UB_GPIO_LED_LAN,
- .active_low = 0,
- },
- {
- .name = "alfa:blue:usb",
- .gpio = HORNET_UB_GPIO_LED_USB,
- .active_low = 0,
- },
- {
- .name = "alfa:blue:wan",
- .gpio = HORNET_UB_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "alfa:blue:wlan",
- .gpio = HORNET_UB_GPIO_LED_WLAN,
- .active_low = 0,
- },
- {
- .name = "alfa:blue:wps",
- .gpio = HORNET_UB_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button hornet_ub_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
- .gpio = HORNET_UB_GPIO_BTN_WPS,
- .active_low = 0,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = HORNET_UB_KEYS_DEBOUNCE_INTERVAL,
- .gpio = HORNET_UB_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init hornet_ub_gpio_setup(void)
-{
- u32 t;
-
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
- t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
- ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
-
- gpio_request_one(HORNET_UB_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- gpio_request_one(HORNET_UB_GPIO_EXT_LNA,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "external LNA0");
-
-}
-
-static void __init hornet_ub_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- hornet_ub_gpio_setup();
-
- ath79_register_m25p80(NULL);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(hornet_ub_leds_gpio),
- hornet_ub_leds_gpio);
- ath79_register_gpio_keys_polled(-1, HORNET_UB_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(hornet_ub_gpio_keys),
- hornet_ub_gpio_keys);
-
- ath79_init_mac(ath79_eth1_data.mac_addr,
- art + HORNET_UB_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + HORNET_UB_MAC1_OFFSET, 0);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_register_wmac(art + HORNET_UB_CALDATA_OFFSET, NULL);
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_HORNET_UB, "HORNET-UB", "ALFA NETWORK Hornet-UB",
- hornet_ub_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ja76pf.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ja76pf.c
deleted file mode 100644
index d1fe0f8a26..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ja76pf.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * jjPlus JA76PF board support
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define JA76PF_KEYS_POLL_INTERVAL 20 /* msecs */
-#define JA76PF_KEYS_DEBOUNCE_INTERVAL (3 * JA76PF_KEYS_POLL_INTERVAL)
-
-#define JA76PF_GPIO_I2C_SCL 0
-#define JA76PF_GPIO_I2C_SDA 1
-#define JA76PF_GPIO_LED_1 5
-#define JA76PF_GPIO_LED_2 4
-#define JA76PF_GPIO_LED_3 3
-#define JA76PF_GPIO_BTN_RESET 11
-
-static struct gpio_led ja76pf_leds_gpio[] __initdata = {
- {
- .name = "jjplus:green:led1",
- .gpio = JA76PF_GPIO_LED_1,
- .active_low = 1,
- }, {
- .name = "jjplus:green:led2",
- .gpio = JA76PF_GPIO_LED_2,
- .active_low = 1,
- }, {
- .name = "jjplus:green:led3",
- .gpio = JA76PF_GPIO_LED_3,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button ja76pf_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
- .gpio = JA76PF_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = {
- .sda_pin = JA76PF_GPIO_I2C_SDA,
- .scl_pin = JA76PF_GPIO_I2C_SCL,
-};
-
-static struct platform_device ja76pf_i2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &ja76pf_i2c_gpio_data,
- }
-};
-
-static const char *ja76pf_part_probes[] = {
- "RedBoot",
- NULL,
-};
-
-static struct flash_platform_data ja76pf_flash_data = {
- .part_probes = ja76pf_part_probes,
-};
-
-#define JA76PF_WAN_PHYMASK (1 << 4)
-#define JA76PF_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3))
-#define JA76PF_MDIO_PHYMASK (JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK)
-
-static void __init ja76pf_init(void)
-{
- ath79_register_m25p80(&ja76pf_flash_data);
-
- ath79_register_mdio(0, ~JA76PF_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = JA76PF_LAN_PHYMASK;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = JA76PF_WAN_PHYMASK;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- platform_device_register(&ja76pf_i2c_gpio_device);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio),
- ja76pf_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ja76pf_gpio_keys),
- ja76pf_gpio_keys);
-
- ath79_register_usb();
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init);
-
-#define JA76PF2_GPIO_LED_D2 5
-#define JA76PF2_GPIO_LED_D3 4
-#define JA76PF2_GPIO_LED_D4 3
-#define JA76PF2_GPIO_BTN_RESET 7
-#define JA76PF2_GPIO_BTN_WPS 8
-
-static struct gpio_led ja76pf2_leds_gpio[] __initdata = {
- {
- .name = "jjplus:green:led1",
- .gpio = JA76PF2_GPIO_LED_D2,
- .active_low = 1,
- }, {
- .name = "jjplus:green:led2",
- .gpio = JA76PF2_GPIO_LED_D3,
- .active_low = 0,
- }, {
- .name = "jjplus:green:led3",
- .gpio = JA76PF2_GPIO_LED_D4,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button ja76pf2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
- .gpio = JA76PF2_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = JA76PF_KEYS_DEBOUNCE_INTERVAL,
- .gpio = JA76PF2_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-#define JA76PF2_LAN_PHYMASK BIT(0)
-#define JA76PF2_WAN_PHYMASK BIT(4)
-#define JA76PF2_MDIO_PHYMASK (JA76PF2_LAN_PHYMASK | JA76PF2_WAN_PHYMASK)
-
-static void __init ja76pf2_init(void)
-{
- ath79_register_m25p80(&ja76pf_flash_data);
-
- ath79_register_mdio(0, ~JA76PF2_MDIO_PHYMASK);
-
- /* MAC0 is connected to the CPU port of the AR8316 switch */
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
-
- /* MAC1 is connected to the PHY4 of the AR8316 switch */
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = BIT(4);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ja76pf2_leds_gpio),
- ja76pf2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, JA76PF_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ja76pf2_gpio_keys),
- ja76pf2_gpio_keys);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_JA76PF2, "JA76PF2", "jjPlus JA76PF2", ja76pf2_init);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap003.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap003.c
deleted file mode 100644
index a3c93ccd90..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap003.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * jjPlus JWAP003 board support
- *
- */
-
-#include <linux/i2c.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-gpio-buttons.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */
-#define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL)
-
-#define JWAP003_GPIO_WPS 11
-#define JWAP003_GPIO_I2C_SCL 0
-#define JWAP003_GPIO_I2C_SDA 1
-
-static struct gpio_keys_button jwap003_gpio_keys[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL,
- .gpio = JWAP003_GPIO_WPS,
- .active_low = 1,
- }
-};
-
-static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = {
- .sda_pin = JWAP003_GPIO_I2C_SDA,
- .scl_pin = JWAP003_GPIO_I2C_SCL,
-};
-
-static struct platform_device jwap003_i2c_gpio_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &jwap003_i2c_gpio_data,
- }
-};
-
-static const char *jwap003_part_probes[] = {
- "RedBoot",
- NULL,
-};
-
-static struct flash_platform_data jwap003_flash_data = {
- .part_probes = jwap003_part_probes,
-};
-
-#define JWAP003_WAN_PHYMASK BIT(0)
-#define JWAP003_LAN_PHYMASK BIT(4)
-
-static void __init jwap003_init(void)
-{
- ath79_register_m25p80(&jwap003_flash_data);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.phy_mask = JWAP003_WAN_PHYMASK;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.has_ar8216 = 1;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = JWAP003_LAN_PHYMASK;
- ath79_eth1_data.speed = SPEED_100;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- platform_device_register(&jwap003_i2c_gpio_device);
-
- ath79_register_usb();
-
- ath79_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(jwap003_gpio_keys),
- jwap003_gpio_keys);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c
deleted file mode 100644
index de24db4d4b..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-jwap230.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * jjPlus JWAP230 board support
- *
- * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
- *
- * Based on mach-wpj558.c and mach-tl-wr1043nd-v2.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define JWAP230_GPIO_LED_LED1 23
-#define JWAP230_GPIO_LED_LED2 22
-#define JWAP230_GPIO_LED_LED3 21
-
-#define JWAP230_MAC0_OFFSET 0x0
-#define JWAP230_MAC1_OFFSET 0x6
-#define JWAP230_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led jwap230_leds_gpio[] __initdata = {
- {
- .name = "jwap230:green:led1",
- .gpio = JWAP230_GPIO_LED_LED1,
- .active_low = 1,
- },
- {
- .name = "jwap230:green:led2",
- .gpio = JWAP230_GPIO_LED_LED2,
- .active_low = 1,
- },
- {
- .name = "jwap230:green:led3",
- .gpio = JWAP230_GPIO_LED_LED3,
- .active_low = 1,
- }
-};
-
-static const struct ar8327_led_info jwap230_leds_qca8337[] = {
- AR8327_LED_INFO(PHY0_0, HW, "jwap230:green:lan"),
- AR8327_LED_INFO(PHY4_0, HW, "jwap230:green:wan"),
-};
-
-/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */
-static struct ar8327_led_cfg jwap230_qca8337_led_cfg = {
- .led_ctrl0 = 0xcf37cf37,
- .led_ctrl1 = 0xcf37cf37,
- .led_ctrl2 = 0xcf37cf37,
- .led_ctrl3 = 0x0,
- .open_drain = true,
-};
-
-/* QCA8337 GMAC0 is connected with QCA9558 over RGMII */
-static struct ar8327_pad_cfg jwap230_qca8337_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- .mac06_exchange_dis = true,
-};
-
-/* QCA8337 GMAC6 is connected with QCA9558 over SGMII */
-static struct ar8327_pad_cfg jwap230_qca8337_pad6_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
-};
-
-static struct ar8327_platform_data jwap230_qca8337_data = {
- .pad0_cfg = &jwap230_qca8337_pad0_cfg,
- .pad6_cfg = &jwap230_qca8337_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &jwap230_qca8337_led_cfg,
- .num_leds = ARRAY_SIZE(jwap230_leds_qca8337),
- .leds = jwap230_leds_qca8337,
-};
-
-static struct mdio_board_info jwap230_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &jwap230_qca8337_data,
- },
-};
-
-static void __init jwap230_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(jwap230_leds_gpio),
- jwap230_leds_gpio);
-
- mdiobus_register_board_info(jwap230_mdio0_info,
- ARRAY_SIZE(jwap230_mdio0_info));
- ath79_register_mdio(0, 0x0);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- /* QCA9558 GMAC0 is connected to RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0xa6000000;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + JWAP230_MAC0_OFFSET, 0);
- ath79_register_eth(0);
-
- /* QCA9558 GMAC1 is connected to SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, art + JWAP230_MAC1_OFFSET, 0);
- ath79_register_eth(1);
-
- ath79_register_wmac(art + JWAP230_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_pci();
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_JWAP230, "JWAP230", "jjPlus JWAP230", jwap230_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c
deleted file mode 100644
index 41254a6d7a..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-koala.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * OCEDO Koala board support
- * Based on the MR1750 machine file
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Marek Lindner <marek@open-mesh.com>
- * Copyright (c) 2018 David Bauer <mail@david-bauer.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define KOALA_GPIO_LED_POWER 22
-#define KOALA_GPIO_LED_WLAN_5G 13
-#define KOALA_GPIO_LED_WLAN_2G 23
-#define KOALA_GPIO_LED_WLAN_SYS 19
-
-#define KOALA_GPIO_BTN_RESET 17
-
-#define KOALA_KEYS_POLL_INTERVAL 20 /* msecs */
-#define KOALA_KEYS_DEBOUNCE_INTERVAL (3 * KOALA_KEYS_POLL_INTERVAL)
-
-#define KOALA_LAN_MAC_OFFSET 0
-#define KOALA_WIFI2G_MAC_OFFSET 0x06
-#define KOALA_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led koala_leds_gpio[] __initdata = {
- {
- .name = "koala:green:power",
- .gpio = KOALA_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "koala:red:wlan58",
- .gpio = KOALA_GPIO_LED_WLAN_5G,
- .active_low = 1,
- },
- {
- .name = "koala:yellow:wlan2",
- .gpio = KOALA_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
- .name = "koala:blue:sys",
- .gpio = KOALA_GPIO_LED_WLAN_SYS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button koala_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = KOALA_KEYS_DEBOUNCE_INTERVAL,
- .gpio = KOALA_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct at803x_platform_data koala_at803x_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 1,
- .enable_rgmii_tx_delay = 0,
- .fixup_rgmii_tx_delay = 1,
-};
-
-static struct mdio_board_info koala_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 5,
- .platform_data = &koala_at803x_data,
- },
-};
-
-static void __init koala_setup_qca955x_eth_cfg(u32 mask,
- unsigned int rxd,
- unsigned int rxdv,
- unsigned int txd,
- unsigned int txe)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
- t = mask;
- t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT;
- t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT;
- t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT;
- t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT;
-
- __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-
- iounmap(base);
-}
-
-static void __init koala_setup(void)
-{
- u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
- u8 mac[6];
-
- ath79_eth0_pll_data.pll_1000 = 0xae000000;
- ath79_eth0_pll_data.pll_100 = 0xa0000101;
- ath79_eth0_pll_data.pll_10 = 0xa0001313;
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(koala_leds_gpio),
- koala_leds_gpio);
- ath79_register_gpio_keys_polled(-1, KOALA_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(koala_gpio_keys),
- koala_gpio_keys);
-
- ath79_init_mac(mac, art + KOALA_WIFI2G_MAC_OFFSET, 0);
- ath79_register_wmac(art + KOALA_WMAC_CALDATA_OFFSET, mac);
- ath79_register_pci();
-
- koala_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(koala_mdio0_info,
- ARRAY_SIZE(koala_mdio0_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + KOALA_LAN_MAC_OFFSET, 0);
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(5);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_KOALA, "KOALA", "OCEDO Koala", koala_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-lan-turtle.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-lan-turtle.c
deleted file mode 100644
index d2faa2c740..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-lan-turtle.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Hak5 LAN Turtle and Packet Squirrel boards support
- *
- * Copyright (C) 2018 Sebastian Kinne <seb@hak5.org>
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define LAN_TURTLE_GPIO_BTN_RESET 11
-#define LAN_TURTLE_GPIO_LED_SYS 13
-
-#define PACKET_SQUIRREL_GPIO_BTN_SW1 18
-#define PACKET_SQUIRREL_GPIO_BTN_SW2 20
-#define PACKET_SQUIRREL_GPIO_BTN_SW3 21
-#define PACKET_SQUIRREL_GPIO_BTN_SW4 24
-#define PACKET_SQUIRREL_GPIO_BTN_RESET 11
-#define PACKET_SQUIRREL_GPIO_LED_B 23
-#define PACKET_SQUIRREL_GPIO_LED_G 22
-#define PACKET_SQUIRREL_GPIO_LED_R 19
-
-#define HAK5_KEYS_POLL_INTERVAL 20 /* msecs */
-#define HAK5_KEYS_DEBOUNCE_INTERVAL (3 * HAK5_KEYS_POLL_INTERVAL)
-
-static const char *hak5_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data hak5_flash_data = {
- .part_probes = hak5_part_probes,
-};
-
-/* LAN Turtle */
-static struct gpio_led lan_turtle_leds_gpio[] __initdata = {
- {
- .name = "lan-turtle:orange:system",
- .gpio = LAN_TURTLE_GPIO_LED_SYS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button lan_turtle_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
- .gpio = LAN_TURTLE_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-/* Packet Squirrel */
-static struct gpio_led packet_squirrel_leds_gpio[] __initdata = {
- {
- .name = "packet-squirrel:blue:system",
- .gpio = PACKET_SQUIRREL_GPIO_LED_B,
- .active_low = 1,
- }, {
- .name = "packet-squirrel:green:system",
- .gpio = PACKET_SQUIRREL_GPIO_LED_G,
- .active_low = 1,
- }, {
- .name = "packet-squirrel:red:system",
- .gpio = PACKET_SQUIRREL_GPIO_LED_R,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button packet_squirrel_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PACKET_SQUIRREL_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "sw1",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PACKET_SQUIRREL_GPIO_BTN_SW1,
- .active_low = 1,
- }, {
- .desc = "sw2",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PACKET_SQUIRREL_GPIO_BTN_SW2,
- .active_low = 1,
- }, {
- .desc = "sw3",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PACKET_SQUIRREL_GPIO_BTN_SW3,
- .active_low = 1,
- }, {
- .desc = "sw4",
- .type = EV_KEY,
- .code = BTN_3,
- .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PACKET_SQUIRREL_GPIO_BTN_SW4,
- .active_low = 1,
- },
-};
-
-static void __init hak5_common_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-
- ath79_register_m25p80(&hak5_flash_data);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_switch_data.phy_poll_mask = 0xfe;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
- ath79_register_eth(1);
-
- ath79_register_usb();
-
- /* GPIO11/12 */
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_UART_RTS_CTS_EN);
-}
-
-static void __init lan_turtle_setup(void)
-{
- hak5_common_setup();
-
- /* GPIO13 */
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(lan_turtle_leds_gpio),
- lan_turtle_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(lan_turtle_gpio_keys),
- lan_turtle_gpio_keys);
-}
-
-static void __init packet_squirrel_setup(void)
-{
- hak5_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(packet_squirrel_leds_gpio),
- packet_squirrel_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(packet_squirrel_gpio_keys),
- packet_squirrel_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_LAN_TURTLE, "LAN-TURTLE",
- "Hak5 LAN Turtle", lan_turtle_setup);
-
-MIPS_MACHINE(ATH79_MACH_PACKET_SQUIRREL, "PACKET-SQUIRREL",
- "Hak5 Packet Squirrel", packet_squirrel_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-lima.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-lima.c
deleted file mode 100644
index 9867429684..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-lima.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * 8devices Lima board support
- *
- * Copyright (C) 2016 Mantas Pucka <mantas@8devices.com>
- * Copyright (C) 2017 Karol Dudek <karoiz@sli.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define LIMA_GPIO_BTN_1_DEFAULT 16
-#define LIMA_KEYS_POLL_INTERVAL 20 /* msecs */
-#define LIMA_KEYS_DEBOUNCE_INTERVAL (3 * LIMA_KEYS_POLL_INTERVAL)
-
-#define LIMA_ETH_PHYS (BIT(0) | BIT(1))
-
-#define LIMA_MAC0_OFFSET 0x0000
-#define LIMA_MAC1_OFFSET 0x0006
-
-#define LIMA_CALDATA_OFFSET 0x1000
-
-static struct gpio_keys_button lima_gpio_keys[] __initdata = {
- {
- .desc = "button1",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = LIMA_KEYS_DEBOUNCE_INTERVAL,
- .gpio = LIMA_GPIO_BTN_1_DEFAULT,
- .active_low = 1,
- }
-};
-
-static void __init lima_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1f080000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_gpio_keys_polled(-1, LIMA_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(lima_gpio_keys),
- lima_gpio_keys);
-
- ath79_setup_ar933x_phy4_switch(true, true);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + LIMA_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art + LIMA_MAC1_OFFSET, 0);
-
- ath79_register_mdio(0, ~LIMA_ETH_PHYS);
-
- ath79_switch_data.phy4_mii_en = 1;
-
- ath79_switch_data.phy_poll_mask |= BIT(0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_mask = BIT(1);
- ath79_register_eth(1);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_register_eth(0);
-
- ath79_register_wmac(art + LIMA_CALDATA_OFFSET, NULL);
- ath79_register_usb();
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_LIMA, "LIMA", "8devices Lima board", lima_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mac1200r.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mac1200r.c
deleted file mode 100644
index 70051cff47..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mc-mac1200r.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * MERCURY MAC1200R board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2013 Gui Iribarren <gui@altermundi.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define MAC1200R_GPIO_LED_WLAN2G 13
-#define MAC1200R_GPIO_LED_WLAN5G 17
-#define MAC1200R_GPIO_LED_SYSTEM 14
-#define MAC1200R_GPIO_LED_WPS 11
-#define MAC1200R_GPIO_LED_WAN 12
-#define MAC1200R_GPIO_LED_LAN1 15
-#define MAC1200R_GPIO_LED_LAN2 21
-#define MAC1200R_GPIO_LED_LAN3 22
-#define MAC1200R_GPIO_LED_LAN4 20
-
-#define MAC1200R_GPIO_BTN_WPS 16
-
-#define MAC1200R_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MAC1200R_KEYS_DEBOUNCE_INTERVAL (3 * MAC1200R_KEYS_POLL_INTERVAL)
-
-#define MAC1200R_MAC0_OFFSET 0
-#define MAC1200R_MAC1_OFFSET 6
-#define MAC1200R_WMAC_CALDATA_OFFSET 0x1000
-#define MAC1200R_PCIE_CALDATA_OFFSET 0x5000
-
-static const char *mac1200r_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data mac1200r_flash_data = {
- .part_probes = mac1200r_part_probes,
-};
-
-static struct gpio_led mac1200r_leds_gpio[] __initdata = {
- {
- .name = "mercury:green:wps",
- .gpio = MAC1200R_GPIO_LED_WPS,
- .active_low = 1,
- },
- {
- .name = "mercury:green:system",
- .gpio = MAC1200R_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "mercury:green:wlan2g",
- .gpio = MAC1200R_GPIO_LED_WLAN2G,
- .active_low = 1,
- },
- {
- .name = "mercury:green:wlan5g",
- .gpio = MAC1200R_GPIO_LED_WLAN5G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button mac1200r_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MAC1200R_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MAC1200R_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-
-static void __init mac1200r_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(&mac1200r_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(mac1200r_leds_gpio),
- mac1200r_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, MAC1200R_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mac1200r_gpio_keys),
- mac1200r_gpio_keys);
-
- ath79_init_mac(tmpmac, mac, 0);
- ath79_wmac_disable_5ghz();
- ath79_register_wmac(art + MAC1200R_WMAC_CALDATA_OFFSET, tmpmac);
-
- ath79_init_mac(tmpmac, mac, 1);
- ap91_pci_init(art + MAC1200R_PCIE_CALDATA_OFFSET, tmpmac);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(1, 0x0);
-
- /* LAN */
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-
- ath79_register_eth(1);
-
- /* WAN */
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 2);
-
- /* GMAC0 is connected to the PHY4 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
-
- ath79_register_eth(0);
-
- ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN1,
- AR934X_GPIO_OUT_LED_LINK3);
- ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN2,
- AR934X_GPIO_OUT_LED_LINK2);
- ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN3,
- AR934X_GPIO_OUT_LED_LINK1);
- ath79_gpio_output_select(MAC1200R_GPIO_LED_LAN4,
- AR934X_GPIO_OUT_LED_LINK0);
- ath79_gpio_output_select(MAC1200R_GPIO_LED_WAN,
- AR934X_GPIO_OUT_LED_LINK4);
-}
-
-MIPS_MACHINE(ATH79_MACH_MC_MAC1200R, "MC-MAC1200R",
- "MERCURY MAC1200R",
- mac1200r_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr12.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr12.c
deleted file mode 100644
index 5a337e5c9f..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr12.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Cisco Meraki MR12 board support
- *
- * Copyright (C) 2014-2015 Chris Blake <chrisrblake93@gmail.com>
- *
- * Based on Atheros AP96 board support configuration
- *
- * Copyright (C) 2009 Marco Porsch
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2010 Atheros Communications
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define MR12_GPIO_LED_W4_GREEN 14
-#define MR12_GPIO_LED_W3_GREEN 13
-#define MR12_GPIO_LED_W2_GREEN 12
-#define MR12_GPIO_LED_W1_GREEN 11
-
-#define MR12_GPIO_LED_WAN 15
-
-#define MR12_GPIO_LED_POWER_ORANGE 16
-#define MR12_GPIO_LED_POWER_GREEN 17
-
-#define MR12_GPIO_BTN_RESET 8
-#define MR12_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MR12_KEYS_DEBOUNCE_INTERVAL (3 * MR12_KEYS_POLL_INTERVAL)
-
-#define MR12_WAN_PHYMASK BIT(4)
-
-#define MR12_CALDATA0_OFFSET 0x21000
-
-static struct gpio_led MR12_leds_gpio[] __initdata = {
- {
- .name = "mr12:green:wan",
- .gpio = MR12_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "mr12:orange:power",
- .gpio = MR12_GPIO_LED_POWER_ORANGE,
- .active_low = 1,
- }, {
- .name = "mr12:green:power",
- .gpio = MR12_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- }, {
- .name = "mr12:green:wifi4",
- .gpio = MR12_GPIO_LED_W4_GREEN,
- .active_low = 1,
- }, {
- .name = "mr12:green:wifi3",
- .gpio = MR12_GPIO_LED_W3_GREEN,
- .active_low = 1,
- }, {
- .name = "mr12:green:wifi2",
- .gpio = MR12_GPIO_LED_W2_GREEN,
- .active_low = 1,
- }, {
- .name = "mr12:green:wifi1",
- .gpio = MR12_GPIO_LED_W1_GREEN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button MR12_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MR12_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MR12_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init MR12_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0xbffd0000);
- u8 wlan_mac[ETH_ALEN];
-
- ath79_register_mdio(0,0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = MR12_WAN_PHYMASK;
- ath79_register_eth(0);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(MR12_leds_gpio),
- MR12_leds_gpio);
- ath79_register_gpio_keys_polled(-1, MR12_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(MR12_gpio_keys),
- MR12_gpio_keys);
-
- ath79_init_mac(wlan_mac, mac, 1);
- ap91_pci_init(mac + MR12_CALDATA0_OFFSET, wlan_mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_MR12, "MR12", "Meraki MR12", MR12_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr16.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr16.c
deleted file mode 100644
index 9da21eab5a..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr16.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Cisco Meraki MR16 board support
- *
- * Copyright (C) 2015 Chris Blake <chrisrblake93@gmail.com>
- *
- * Based on Atheros AP96 board support configuration
- *
- * Copyright (C) 2009 Marco Porsch
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2010 Atheros Communications
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define MR16_GPIO_LED_W4_GREEN 3
-#define MR16_GPIO_LED_W3_GREEN 2
-#define MR16_GPIO_LED_W2_GREEN 1
-#define MR16_GPIO_LED_W1_GREEN 0
-
-#define MR16_GPIO_LED_WAN 4
-
-#define MR16_GPIO_LED_POWER_ORANGE 5
-#define MR16_GPIO_LED_POWER_GREEN 6
-
-#define MR16_GPIO_BTN_RESET 7
-#define MR16_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MR16_KEYS_DEBOUNCE_INTERVAL (3 * MR16_KEYS_POLL_INTERVAL)
-
-#define MR16_WAN_PHYMASK BIT(0)
-
-#define MR16_CALDATA0_OFFSET 0x21000
-#define MR16_CALDATA1_OFFSET 0x25000
-
-static struct gpio_led MR16_leds_gpio[] __initdata = {
- {
- .name = "mr16:green:wan",
- .gpio = MR16_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "mr16:orange:power",
- .gpio = MR16_GPIO_LED_POWER_ORANGE,
- .active_low = 1,
- }, {
- .name = "mr16:green:power",
- .gpio = MR16_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- }, {
- .name = "mr16:green:wifi4",
- .gpio = MR16_GPIO_LED_W4_GREEN,
- .active_low = 1,
- }, {
- .name = "mr16:green:wifi3",
- .gpio = MR16_GPIO_LED_W3_GREEN,
- .active_low = 1,
- }, {
- .name = "mr16:green:wifi2",
- .gpio = MR16_GPIO_LED_W2_GREEN,
- .active_low = 1,
- }, {
- .name = "mr16:green:wifi1",
- .gpio = MR16_GPIO_LED_W1_GREEN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button MR16_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MR16_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MR16_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init MR16_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0xbffd0000);
- u8 wlan0_mac[ETH_ALEN];
- u8 wlan1_mac[ETH_ALEN];
-
- ath79_register_mdio(0,0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = MR16_WAN_PHYMASK;
- ath79_register_eth(0);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(MR16_leds_gpio),
- MR16_leds_gpio);
- ath79_register_gpio_keys_polled(-1, MR16_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(MR16_gpio_keys),
- MR16_gpio_keys);
-
- ath79_init_mac(wlan0_mac, mac, 1);
- ath79_init_mac(wlan1_mac, mac, 2);
- ap94_pci_init(mac + MR16_CALDATA0_OFFSET, wlan0_mac,
- mac + MR16_CALDATA1_OFFSET, wlan1_mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_MR16, "MR16", "Meraki MR16", MR16_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c
deleted file mode 100644
index 987ed4bd5d..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * MR1750 board support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Marek Lindner <marek@open-mesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define MR1750_GPIO_LED_LAN 12
-#define MR1750_GPIO_LED_WLAN_2G 13
-#define MR1750_GPIO_LED_STATUS_GREEN 19
-#define MR1750_GPIO_LED_STATUS_RED 21
-#define MR1750_GPIO_LED_POWER 22
-#define MR1750_GPIO_LED_WLAN_5G 23
-
-#define MR1750_GPIO_BTN_RESET 17
-
-#define MR1750_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MR1750_KEYS_DEBOUNCE_INTERVAL (3 * MR1750_KEYS_POLL_INTERVAL)
-
-#define MR1750_MAC0_OFFSET 0
-#define MR1750_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led mr1750_leds_gpio[] __initdata = {
- {
- .name = "mr1750:blue:power",
- .gpio = MR1750_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "mr1750:blue:wan",
- .gpio = MR1750_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "mr1750:blue:wlan24",
- .gpio = MR1750_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
- .name = "mr1750:blue:wlan58",
- .gpio = MR1750_GPIO_LED_WLAN_5G,
- .active_low = 1,
- },
- {
- .name = "mr1750:green:status",
- .gpio = MR1750_GPIO_LED_STATUS_GREEN,
- .active_low = 1,
- },
- {
- .name = "mr1750:red:status",
- .gpio = MR1750_GPIO_LED_STATUS_RED,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button mr1750_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MR1750_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MR1750_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct at803x_platform_data mr1750_at803x_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 1,
- .enable_rgmii_tx_delay = 0,
- .fixup_rgmii_tx_delay = 1,
-};
-
-static struct mdio_board_info mr1750_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 5,
- .platform_data = &mr1750_at803x_data,
- },
-};
-
-static void __init mr1750_setup_qca955x_eth_cfg(u32 mask,
- unsigned int rxd,
- unsigned int rxdv,
- unsigned int txd,
- unsigned int txe)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
- t = mask;
- t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT;
- t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT;
- t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT;
- t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT;
-
- __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-
- iounmap(base);
-}
-
-static void __init mr1750_setup(void)
-{
- u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
- u8 mac[6];
-
- ath79_eth0_pll_data.pll_1000 = 0xae000000;
- ath79_eth0_pll_data.pll_100 = 0xa0000101;
- ath79_eth0_pll_data.pll_10 = 0xa0001313;
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(mr1750_leds_gpio),
- mr1750_leds_gpio);
- ath79_register_gpio_keys_polled(-1, MR1750_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mr1750_gpio_keys),
- mr1750_gpio_keys);
-
- ath79_init_mac(mac, art + MR1750_MAC0_OFFSET, 1);
- ath79_register_wmac(art + MR1750_WMAC_CALDATA_OFFSET, mac);
- ath79_register_pci();
-
- mr1750_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(mr1750_mdio0_info,
- ARRAY_SIZE(mr1750_mdio0_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + MR1750_MAC0_OFFSET, 0);
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(5);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_MR1750, "MR1750", "OpenMesh MR1750", mr1750_setup);
-MIPS_MACHINE(ATH79_MACH_MR1750V2, "MR1750v2", "OpenMesh MR1750v2", mr1750_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr18.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr18.c
deleted file mode 100644
index 2d2fb6e84c..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr18.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * Cisco Meraki MR18 board support
- *
- * Copyright (C) 2015 Chris Blake <chrisrblake93@gmail.com>
- * Copyright (C) 2015 Christian Lamparter <chunkeey@googlemail.com>
- * Copyright (C) 2015 Thomas Hebb <tommyhebb@gmail.com>
- *
- * Based on Cisco Meraki GPL Release r23-20150601 MR18 Device Config
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/platform/ar934x_nfc.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include <linux/leds-nu801.h>
-#include <linux/pci.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-nfc.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define MR18_GPIO_LED_POWER_WHITE 18
-#define MR18_GPIO_LED_POWER_ORANGE 21
-
-#define MR18_GPIO_BTN_RESET 17
-#define MR18_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MR18_KEYS_DEBOUNCE_INTERVAL (3 * MR18_KEYS_POLL_INTERVAL)
-
-#define MR18_WAN_PHYADDR 3
-
-/* used for eth calibration */
-#define MR18_OTP_BASE (AR71XX_APB_BASE + 0x130000)
-#define MR18_OTP_SIZE (0x2000) /* just a guess */
-#define MR18_OTP_MEM_0_REG (0x0000)
-#define MR18_OTP_INTF2_REG (0x1008)
-#define MR18_OTP_STATUS0_REG (0x1018)
-#define MR18_OTP_STATUS0_EFUSE_VALID BIT(2)
-
-#define MR18_OTP_STATUS1_REG (0x101c)
-#define MR18_OTP_LDO_CTRL_REG (0x1024)
-#define MR18_OTP_LDO_STATUS_REG (0x102c)
-#define MR18_OTP_LDO_STATUS_POWER_ON BIT(0)
-
-static struct gpio_led MR18_leds_gpio[] __initdata = {
- {
- .name = "mr18:white:power",
- .gpio = MR18_GPIO_LED_POWER_WHITE,
- .active_low = 1,
- }, {
- .name = "mr18:orange:power",
- .gpio = MR18_GPIO_LED_POWER_ORANGE,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button MR18_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MR18_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MR18_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct led_nu801_template tricolor_led_template = {
- .device_name = "mr18",
- .name = "tricolor",
- .num_leds = 1,
- .cki = 11,
- .sdi = 12,
- .lei = -1,
- .ndelay = 500,
- .init_brightness = {
- LED_OFF,
- LED_OFF,
- LED_OFF,
- },
- .default_trigger = "none",
- .led_colors = { "red", "green", "blue" },
-};
-
-static struct led_nu801_platform_data tricolor_led_data = {
- .num_controllers = 1,
- .template = &tricolor_led_template,
-};
-
-static struct platform_device tricolor_leds = {
- .name = "leds-nu801",
- .id = -1,
- .dev.platform_data = &tricolor_led_data,
-};
-
-static int mr18_extract_sgmii_res_cal(void)
-{
- void __iomem *base;
- unsigned int reversed_sgmii_value;
-
- unsigned int otp_value, otp_per_val, rbias_per, read_data;
- unsigned int rbias_pos_or_neg;
- unsigned int sgmii_res_cal_value;
- int res_cal_val;
-
- base = ioremap_nocache(MR18_OTP_BASE, MR18_OTP_SIZE);
- if (!base)
- return -EIO;
-
- __raw_writel(0x7d, base + MR18_OTP_INTF2_REG);
- __raw_writel(0x00, base + MR18_OTP_LDO_CTRL_REG);
-
- while (__raw_readl(base + MR18_OTP_LDO_STATUS_REG) &
- MR18_OTP_LDO_STATUS_POWER_ON);
-
- __raw_readl(base + MR18_OTP_MEM_0_REG + 4);
-
- while (!(__raw_readl(base + MR18_OTP_STATUS0_REG) &
- MR18_OTP_STATUS0_EFUSE_VALID));
-
- read_data = __raw_readl(base + MR18_OTP_STATUS1_REG);
-
- iounmap(base);
-
- if (!(read_data & 0x1fff))
- return -ENODEV;
-
- if (read_data & 0x00001000)
- otp_value = (read_data & 0xfc0) >> 6;
- else
- otp_value = read_data & 0x3f;
-
- if (otp_value > 31) {
- otp_per_val = 63 - otp_value;
- rbias_pos_or_neg = 1;
- } else {
- otp_per_val = otp_value;
- rbias_pos_or_neg = 0;
- }
-
- rbias_per = otp_per_val * 15;
-
- if (rbias_pos_or_neg == 1)
- res_cal_val = (rbias_per + 34) / 21;
- else if (rbias_per > 34)
- res_cal_val = -((rbias_per - 34) / 21);
- else
- res_cal_val = (34 - rbias_per) / 21;
-
- sgmii_res_cal_value = (8 + res_cal_val) & 0xf;
-
- reversed_sgmii_value = (sgmii_res_cal_value & 8) >> 3;
- reversed_sgmii_value |= (sgmii_res_cal_value & 4) >> 1;
- reversed_sgmii_value |= (sgmii_res_cal_value & 2) << 1;
- reversed_sgmii_value |= (sgmii_res_cal_value & 1) << 3;
- printk(KERN_INFO "SGMII cal value = 0x%x\n", reversed_sgmii_value);
- return reversed_sgmii_value;
-}
-
-static void mr18_setup_qca955x_eth_serdes_cal(unsigned int sgmii_value)
-{
- void __iomem *ethbase, *pllbase;
- u32 t;
-
- ethbase = ioremap_nocache(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
- pllbase = ioremap_nocache(AR71XX_PLL_BASE, AR71XX_PLL_SIZE);
-
- /* To Check the locking of the SGMII PLL */
- t = __raw_readl(ethbase + QCA955X_GMAC_REG_SGMII_SERDES);
- t &= ~(QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK <<
- QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT);
- t |= (sgmii_value & QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK) <<
- QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT;
- __raw_writel(t, ethbase + QCA955X_GMAC_REG_SGMII_SERDES);
-
- __raw_writel(QCA955X_PLL_ETH_SGMII_SERDES_LOCK_DETECT |
- QCA955X_PLL_ETH_SGMII_SERDES_PLL_REFCLK |
- QCA955X_PLL_ETH_SGMII_SERDES_EN_PLL,
- pllbase + QCA955X_PLL_ETH_SGMII_SERDES_REG);
-
- ath79_device_reset_clear(QCA955X_RESET_SGMII_ANALOG);
- ath79_device_reset_clear(QCA955X_RESET_SGMII);
-
- while (!(__raw_readl(ethbase + QCA955X_GMAC_REG_SGMII_SERDES) &
- QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS));
-
- iounmap(ethbase);
- iounmap(pllbase);
-}
-
-static struct ath9k_platform_data pci_main_wifi_data = {
- .led_pin = -1,
-};
-static struct ath9k_platform_data pci_scan_wifi_data = {
- .led_pin = -1,
-};
-
-static int mr18_dual_pci_plat_dev_init(struct pci_dev *dev)
-{
- /* The PCIE devices are attached to different busses but they
- * both share the same slot number. Checking the PCI_SLOT vals
- * does not work.
- */
- switch (dev->bus->number) {
- case 0:
- dev->dev.platform_data = &pci_main_wifi_data;
- break;
- case 1:
- dev->dev.platform_data = &pci_scan_wifi_data;
- break;
- }
-
- return 0;
-}
-
-static void __init mr18_setup(void)
-{
- int res;
-
- /* NAND */
- ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_SOFT_BCH);
- ath79_register_nfc();
-
- /* even though, the PHY is connected via RGMII,
- * the SGMII/SERDES PLLs need to be calibrated and locked.
- * Or else, the PHY won't be working for this platfrom.
- *
- * Figuring this out took such a long time, that we want to
- * point this quirk out, before someone wants to remove it.
- */
- res = mr18_extract_sgmii_res_cal();
- if (res >= 0) {
- /* Setup SoC Eth Config */
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN |
- (3 << QCA955X_ETH_CFG_RXD_DELAY_SHIFT) |
- (3 << QCA955X_ETH_CFG_RDV_DELAY_SHIFT));
-
- /* MDIO Interface */
- ath79_register_mdio(0, 0x0);
-
- mr18_setup_qca955x_eth_serdes_cal(res);
-
- /* GMAC0 is connected to an Atheros AR8035-A */
- ath79_init_mac(ath79_eth0_data.mac_addr, NULL, 0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(MR18_WAN_PHYADDR);
- ath79_eth0_pll_data.pll_1000 = 0xa6000000;
- ath79_eth0_pll_data.pll_100 = 0xa0000101;
- ath79_eth0_pll_data.pll_10 = 0x80001313;
- ath79_register_eth(0);
- } else {
- printk(KERN_ERR "failed to read EFUSE for ethernet cal\n");
- }
-
- /* LEDs and Buttons */
- platform_device_register(&tricolor_leds);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(MR18_leds_gpio),
- MR18_leds_gpio);
- ath79_register_gpio_keys_polled(-1, MR18_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(MR18_gpio_keys),
- MR18_gpio_keys);
-
- /* Clear RTC reset (Needed by SoC WiFi) */
- ath79_device_reset_clear(QCA955X_RESET_RTC);
-
- /* WiFi */
- ath79_register_wmac_simple();
-
- pci_main_wifi_data.eeprom_name = "pci_wmac0.eeprom";
- pci_scan_wifi_data.eeprom_name = "pci_wmac1.eeprom";
- ath79_pci_set_plat_dev_init(mr18_dual_pci_plat_dev_init);
- ath79_register_pci();
-}
-MIPS_MACHINE(ATH79_MACH_MR18, "MR18", "Meraki MR18", mr18_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c
deleted file mode 100644
index 701330cebd..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr600.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * OpenMesh OM2P board support
- *
- * Copyright (C) 2012 Marek Lindner <marek@open-mesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define MR600_GPIO_LED_WLAN58 12
-#define MR600_GPIO_LED_WPS 13
-#define MR600_GPIO_LED_POWER 14
-
-#define MR600V2_GPIO_LED_WLAN58_RED 12
-#define MR600V2_GPIO_LED_WPS 13
-#define MR600V2_GPIO_LED_POWER 14
-#define MR600V2_GPIO_LED_WLAN24_GREEN 18
-#define MR600V2_GPIO_LED_WLAN24_YELLOW 19
-#define MR600V2_GPIO_LED_WLAN24_RED 20
-#define MR600V2_GPIO_LED_WLAN58_GREEN 21
-#define MR600V2_GPIO_LED_WLAN58_YELLOW 22
-
-#define MR600_GPIO_BTN_RESET 17
-
-#define MR600_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MR600_KEYS_DEBOUNCE_INTERVAL (3 * MR600_KEYS_POLL_INTERVAL)
-
-#define MR600_MAC_OFFSET 0
-#define MR600_WMAC_CALDATA_OFFSET 0x1000
-#define MR600_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led mr600_leds_gpio[] __initdata = {
- {
- .name = "mr600:orange:power",
- .gpio = MR600_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "mr600:blue:wps",
- .gpio = MR600_GPIO_LED_WPS,
- .active_low = 1,
- },
- {
- .name = "mr600:green:wlan58",
- .gpio = MR600_GPIO_LED_WLAN58,
- .active_low = 1,
- },
-};
-
-static struct gpio_led mr600v2_leds_gpio[] __initdata = {
- {
- .name = "mr600:blue:power",
- .gpio = MR600V2_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "mr600:blue:wps",
- .gpio = MR600V2_GPIO_LED_WPS,
- .active_low = 1,
- },
- {
- .name = "mr600:red:wlan24",
- .gpio = MR600V2_GPIO_LED_WLAN24_RED,
- .active_low = 1,
- },
- {
- .name = "mr600:yellow:wlan24",
- .gpio = MR600V2_GPIO_LED_WLAN24_YELLOW,
- .active_low = 1,
- },
- {
- .name = "mr600:green:wlan24",
- .gpio = MR600V2_GPIO_LED_WLAN24_GREEN,
- .active_low = 1,
- },
- {
- .name = "mr600:red:wlan58",
- .gpio = MR600V2_GPIO_LED_WLAN58_RED,
- .active_low = 1,
- },
- {
- .name = "mr600:yellow:wlan58",
- .gpio = MR600V2_GPIO_LED_WLAN58_YELLOW,
- .active_low = 1,
- },
- {
- .name = "mr600:green:wlan58",
- .gpio = MR600V2_GPIO_LED_WLAN58_GREEN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button mr600_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MR600_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MR600_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init mr600_base_setup(unsigned num_leds, struct gpio_led *leds)
-{
- u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
- u8 mac[6];
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, num_leds, leds);
- ath79_register_gpio_keys_polled(-1, MR600_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mr600_gpio_keys),
- mr600_gpio_keys);
-
- ath79_init_mac(mac, art + MR600_MAC_OFFSET, 1);
- ath79_register_wmac(art + MR600_WMAC_CALDATA_OFFSET, mac);
-
- ath79_init_mac(mac, art + MR600_MAC_OFFSET, 8);
- ap91_pci_init(art + MR600_PCIE_CALDATA_OFFSET, mac);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + MR600_MAC_OFFSET, 0);
-
- /* GMAC0 is connected to an external PHY */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-}
-
-static void __init mr600_setup(void)
-{
- mr600_base_setup(ARRAY_SIZE(mr600_leds_gpio), mr600_leds_gpio);
- ap9x_pci_setup_wmac_led_pin(0, 0);
-}
-
-MIPS_MACHINE(ATH79_MACH_MR600, "MR600", "OpenMesh MR600", mr600_setup);
-
-static void __init mr600v2_setup(void)
-{
- mr600_base_setup(ARRAY_SIZE(mr600v2_leds_gpio), mr600v2_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_MR600V2, "MR600v2", "OpenMesh MR600v2", mr600v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c
deleted file mode 100644
index 6b83c4cdf4..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr900.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * MR900 board support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Marek Lindner <marek@open-mesh.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define MR900_GPIO_LED_LAN 12
-#define MR900_GPIO_LED_WLAN_2G 13
-#define MR900_GPIO_LED_STATUS_GREEN 19
-#define MR900_GPIO_LED_STATUS_RED 21
-#define MR900_GPIO_LED_POWER 22
-#define MR900_GPIO_LED_WLAN_5G 23
-
-#define MR900_GPIO_BTN_RESET 17
-
-#define MR900_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MR900_KEYS_DEBOUNCE_INTERVAL (3 * MR900_KEYS_POLL_INTERVAL)
-
-#define MR900_MAC0_OFFSET 0
-#define MR900_WMAC_CALDATA_OFFSET 0x1000
-#define MR900_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led mr900_leds_gpio[] __initdata = {
- {
- .name = "mr900:blue:power",
- .gpio = MR900_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "mr900:blue:wan",
- .gpio = MR900_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "mr900:blue:wlan24",
- .gpio = MR900_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
- .name = "mr900:blue:wlan58",
- .gpio = MR900_GPIO_LED_WLAN_5G,
- .active_low = 1,
- },
- {
- .name = "mr900:green:status",
- .gpio = MR900_GPIO_LED_STATUS_GREEN,
- .active_low = 1,
- },
- {
- .name = "mr900:red:status",
- .gpio = MR900_GPIO_LED_STATUS_RED,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button mr900_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MR900_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MR900_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct at803x_platform_data mr900_at803x_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 1,
- .enable_rgmii_tx_delay = 0,
- .fixup_rgmii_tx_delay = 1,
-};
-
-static struct mdio_board_info mr900_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 5,
- .platform_data = &mr900_at803x_data,
- },
-};
-
-static void __init mr900_setup_qca955x_eth_cfg(u32 mask,
- unsigned int rxd,
- unsigned int rxdv,
- unsigned int txd,
- unsigned int txe)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
- t = mask;
- t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT;
- t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT;
- t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT;
- t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT;
-
- __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-
- iounmap(base);
-}
-
-static void __init mr900_setup(void)
-{
- u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
- u8 mac[6], pcie_mac[6];
- struct ath9k_platform_data *pdata;
-
- ath79_eth0_pll_data.pll_1000 = 0xae000000;
- ath79_eth0_pll_data.pll_100 = 0xa0000101;
- ath79_eth0_pll_data.pll_10 = 0xa0001313;
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(mr900_leds_gpio),
- mr900_leds_gpio);
- ath79_register_gpio_keys_polled(-1, MR900_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mr900_gpio_keys),
- mr900_gpio_keys);
-
- ath79_init_mac(mac, art + MR900_MAC0_OFFSET, 1);
- ath79_register_wmac(art + MR900_WMAC_CALDATA_OFFSET, mac);
- ath79_init_mac(pcie_mac, art + MR900_MAC0_OFFSET, 16);
- ap91_pci_init(art + MR900_PCIE_CALDATA_OFFSET, pcie_mac);
- pdata = ap9x_pci_get_wmac_data(0);
- if (!pdata) {
- pr_err("mr900: unable to get address of wlan data\n");
- return;
- }
- pdata->use_eeprom = true;
-
- mr900_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(mr900_mdio0_info,
- ARRAY_SIZE(mr900_mdio0_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + MR900_MAC0_OFFSET, 0);
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(5);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_MR900, "MR900", "OpenMesh MR900", mr900_setup);
-MIPS_MACHINE(ATH79_MACH_MR900v2, "MR900v2", "OpenMesh MR900v2", mr900_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c
deleted file mode 100644
index a87413d201..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n600.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * WD My Net N600 board support
- *
- * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define MYNET_N600_GPIO_LED_WIFI 0
-#define MYNET_N600_GPIO_LED_POWER 11
-#define MYNET_N600_GPIO_LED_INTERNET 12
-#define MYNET_N600_GPIO_LED_WPS 13
-
-#define MYNET_N600_GPIO_LED_LAN1 4
-#define MYNET_N600_GPIO_LED_LAN2 3
-#define MYNET_N600_GPIO_LED_LAN3 2
-#define MYNET_N600_GPIO_LED_LAN4 1
-
-#define MYNET_N600_GPIO_BTN_RESET 16
-#define MYNET_N600_GPIO_BTN_WPS 17
-
-#define MYNET_N600_GPIO_EXTERNAL_LNA0 14
-#define MYNET_N600_GPIO_EXTERNAL_LNA1 15
-
-#define MYNET_N600_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MYNET_N600_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_N600_KEYS_POLL_INTERVAL)
-
-#define MYNET_N600_MAC0_OFFSET 0
-#define MYNET_N600_MAC1_OFFSET 6
-#define MYNET_N600_WMAC_CALDATA_OFFSET 0x1000
-#define MYNET_N600_PCIE_CALDATA_OFFSET 0x5000
-
-#define MYNET_N600_NVRAM_ADDR 0x1f058010
-#define MYNET_N600_NVRAM_SIZE 0x7ff0
-
-static struct gpio_led mynet_n600_leds_gpio[] __initdata = {
- {
- .name = "wd:blue:power",
- .gpio = MYNET_N600_GPIO_LED_POWER,
- .active_low = 0,
- },
- {
- .name = "wd:blue:wps",
- .gpio = MYNET_N600_GPIO_LED_WPS,
- .active_low = 0,
- },
- {
- .name = "wd:blue:wireless",
- .gpio = MYNET_N600_GPIO_LED_WIFI,
- .active_low = 0,
- },
- {
- .name = "wd:blue:internet",
- .gpio = MYNET_N600_GPIO_LED_INTERNET,
- .active_low = 0,
- },
- {
- .name = "wd:green:lan1",
- .gpio = MYNET_N600_GPIO_LED_LAN1,
- .active_low = 1,
- },
- {
- .name = "wd:green:lan2",
- .gpio = MYNET_N600_GPIO_LED_LAN2,
- .active_low = 1,
- },
- {
- .name = "wd:green:lan3",
- .gpio = MYNET_N600_GPIO_LED_LAN3,
- .active_low = 1,
- },
- {
- .name = "wd:green:lan4",
- .gpio = MYNET_N600_GPIO_LED_LAN4,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button mynet_n600_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MYNET_N600_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MYNET_N600_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = MYNET_N600_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MYNET_N600_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static void mynet_n600_get_mac(const char *name, char *mac)
-{
- u8 *nvram = (u8 *) KSEG1ADDR(MYNET_N600_NVRAM_ADDR);
- int err;
-
- err = ath79_nvram_parse_mac_addr(nvram, MYNET_N600_NVRAM_SIZE,
- name, mac);
- if (err)
- pr_err("no MAC address found for %s\n", name);
-}
-
-#define MYNET_N600_WAN_PHY_MASK BIT(0)
-
-static void __init mynet_n600_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(NULL);
-
- ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN1,
- AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN2,
- AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN3,
- AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(MYNET_N600_GPIO_LED_LAN4,
- AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(MYNET_N600_GPIO_LED_INTERNET,
- AR934X_GPIO_OUT_GPIO);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_n600_leds_gpio),
- mynet_n600_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, MYNET_N600_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mynet_n600_gpio_keys),
- mynet_n600_gpio_keys);
-
- /*
- * Control signal for external LNAs 0 and 1
- * Taken from GPL bootloader source:
- * board/ar7240/db12x/alpha_gpio.c
- */
- ath79_wmac_set_ext_lna_gpio(0, MYNET_N600_GPIO_EXTERNAL_LNA0);
- ath79_wmac_set_ext_lna_gpio(1, MYNET_N600_GPIO_EXTERNAL_LNA1);
-
- mynet_n600_get_mac("wlan24mac=", tmpmac);
- ath79_register_wmac(art + MYNET_N600_WMAC_CALDATA_OFFSET, tmpmac);
-
- mynet_n600_get_mac("wlan5mac=", tmpmac);
- ap91_pci_init(art + MYNET_N600_PCIE_CALDATA_OFFSET, tmpmac);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE |
- AR934X_ETH_CFG_SW_PHY_SWAP);
-
- ath79_register_mdio(1, 0x0);
-
- /* LAN */
- mynet_n600_get_mac("lanmac=", ath79_eth1_data.mac_addr);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-
- ath79_register_eth(1);
-
- /* WAN */
- mynet_n600_get_mac("wanmac=", ath79_eth0_data.mac_addr);
-
- /* GMAC0 is connected to the PHY4 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = MYNET_N600_WAN_PHY_MASK;
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = MYNET_N600_WAN_PHY_MASK;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
-
- ath79_register_eth(0);
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_MYNET_N600, "MYNET-N600", "WD My Net N600",
- mynet_n600_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c
deleted file mode 100644
index a822b6c3e2..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-n750.c
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * WD My Net N750 board support
- *
- * Copyright (C) 2013 Felix Kaechele <felix@fetzig.org>
- * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-
-/*
- * Taken from GPL bootloader source:
- * board/ar7240/db12x/alpha_gpio.c
- */
-#define MYNET_N750_GPIO_LED_WIFI 11
-#define MYNET_N750_GPIO_LED_INTERNET 12
-#define MYNET_N750_GPIO_LED_WPS 13
-#define MYNET_N750_GPIO_LED_POWER 14
-
-#define MYNET_N750_GPIO_BTN_RESET 17
-#define MYNET_N750_GPIO_BTN_WPS 19
-
-#define MYNET_N750_GPIO_EXTERNAL_LNA0 15
-#define MYNET_N750_GPIO_EXTERNAL_LNA1 18
-
-#define MYNET_N750_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MYNET_N750_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_N750_KEYS_POLL_INTERVAL)
-
-#define MYNET_N750_WMAC_CALDATA_OFFSET 0x1000
-#define MYNET_N750_PCIE_CALDATA_OFFSET 0x5000
-
-#define MYNET_N750_NVRAM_ADDR 0x1f058010
-#define MYNET_N750_NVRAM_SIZE 0x7ff0
-
-static struct gpio_led mynet_n750_leds_gpio[] __initdata = {
- {
- .name = "wd:blue:power",
- .gpio = MYNET_N750_GPIO_LED_POWER,
- .active_low = 0,
- },
- {
- .name = "wd:blue:wps",
- .gpio = MYNET_N750_GPIO_LED_WPS,
- .active_low = 0,
- },
- {
- .name = "wd:blue:wireless",
- .gpio = MYNET_N750_GPIO_LED_WIFI,
- .active_low = 0,
- },
- {
- .name = "wd:blue:internet",
- .gpio = MYNET_N750_GPIO_LED_INTERNET,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button mynet_n750_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MYNET_N750_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MYNET_N750_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = MYNET_N750_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MYNET_N750_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static const struct ar8327_led_info mynet_n750_leds_ar8327[] = {
- AR8327_LED_INFO(PHY0_0, HW, "wd:green:lan1"),
- AR8327_LED_INFO(PHY1_0, HW, "wd:green:lan2"),
- AR8327_LED_INFO(PHY2_0, HW, "wd:green:lan3"),
- AR8327_LED_INFO(PHY3_0, HW, "wd:green:lan4"),
- AR8327_LED_INFO(PHY4_0, HW, "wd:green:wan"),
- AR8327_LED_INFO(PHY0_1, HW, "wd:yellow:lan1"),
- AR8327_LED_INFO(PHY1_1, HW, "wd:yellow:lan2"),
- AR8327_LED_INFO(PHY2_1, HW, "wd:yellow:lan3"),
- AR8327_LED_INFO(PHY3_1, HW, "wd:yellow:lan4"),
- AR8327_LED_INFO(PHY4_1, HW, "wd:yellow:wan"),
-};
-
-static struct ar8327_pad_cfg mynet_n750_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_led_cfg mynet_n750_ar8327_led_cfg = {
- .led_ctrl0 = 0xcc35cc35,
- .led_ctrl1 = 0xca35ca35,
- .led_ctrl2 = 0xc935c935,
- .led_ctrl3 = 0x03ffff00,
- .open_drain = false,
-};
-
-static struct ar8327_platform_data mynet_n750_ar8327_data = {
- .pad0_cfg = &mynet_n750_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &mynet_n750_ar8327_led_cfg,
- .num_leds = ARRAY_SIZE(mynet_n750_leds_ar8327),
- .leds = mynet_n750_leds_ar8327,
-};
-
-static struct mdio_board_info mynet_n750_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &mynet_n750_ar8327_data,
- },
-};
-
-static void mynet_n750_get_mac(const char *name, char *mac)
-{
- u8 *nvram = (u8 *) KSEG1ADDR(MYNET_N750_NVRAM_ADDR);
- int err;
-
- err = ath79_nvram_parse_mac_addr(nvram, MYNET_N750_NVRAM_SIZE,
- name, mac);
- if (err)
- pr_err("no MAC address found for %s\n", name);
-}
-
-/*
- * The bootloader on this board powers down all PHYs on the switch
- * before booting the kernel. We bring all PHYs back up so that they are
- * discoverable by the mdio bus scan and the switch is detected
- * correctly.
- */
-static void mynet_n750_mdio_fixup(struct mii_bus *bus)
-{
- int i;
-
- for (i = 0; i < 5; i++)
- bus->write(bus, i, MII_BMCR,
- (BMCR_RESET | BMCR_ANENABLE | BMCR_SPEED1000));
-
- mdelay(1000);
-}
-
-static void __init mynet_n750_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(NULL);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_n750_leds_gpio),
- mynet_n750_leds_gpio);
- ath79_register_gpio_keys_polled(-1, MYNET_N750_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mynet_n750_gpio_keys),
- mynet_n750_gpio_keys);
- /*
- * Control signal for external LNAs 0 and 1
- * Taken from GPL bootloader source:
- * board/ar7240/db12x/alpha_gpio.c
- */
- ath79_wmac_set_ext_lna_gpio(0, MYNET_N750_GPIO_EXTERNAL_LNA0);
- ath79_wmac_set_ext_lna_gpio(1, MYNET_N750_GPIO_EXTERNAL_LNA1);
-
- mynet_n750_get_mac("wlan24mac=", tmpmac);
- ath79_register_wmac(art + MYNET_N750_WMAC_CALDATA_OFFSET, tmpmac);
-
- mynet_n750_get_mac("wlan5mac=", tmpmac);
- ap91_pci_init(art + MYNET_N750_PCIE_CALDATA_OFFSET, tmpmac);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-
- mdiobus_register_board_info(mynet_n750_mdio0_info,
- ARRAY_SIZE(mynet_n750_mdio0_info));
-
- ath79_mdio0_data.reset = mynet_n750_mdio_fixup;
- ath79_register_mdio(0, 0x0);
-
- mynet_n750_get_mac("lanmac=", ath79_eth0_data.mac_addr);
-
- /* GMAC0 is connected to an AR8327N switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_MYNET_N750, "MYNET-N750", "WD My Net N750",
- mynet_n750_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c
deleted file mode 100644
index cfb075b681..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mynet-rext.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * WD My Net WI-FI Range Extender (Codename:Starfish db12x) board support
- *
- * Copyright (C) 2013 Christian Lamparter <chunkeey@googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define MYNET_REXT_GPIO_LED_POWER 11
-#define MYNET_REXT_GPIO_LED_ETHERNET 12
-#define MYNET_REXT_GPIO_LED_WIFI 19
-
-#define MYNET_REXT_GPIO_LED_RF_QTY1 20
-#define MYNET_REXT_GPIO_LED_RF_QTY2 21
-#define MYNET_REXT_GPIO_LED_RF_QTY3 22
-
-#define MYNET_REXT_GPIO_BTN_RESET 13
-#define MYNET_REXT_GPIO_BTN_WPS 15
-#define MYNET_REXT_GPIO_SW_RF 14
-
-#define MYNET_REXT_GPIO_PHY_SWRST 16 /* disables Ethernet PHY */
-#define MYNET_REXT_GPIO_PHY_INT 17
-#define MYNET_REXT_GPIO_18 18
-
-#define MYNET_REXT_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MYNET_REXT_KEYS_DEBOUNCE_INTERVAL (3 * MYNET_REXT_KEYS_POLL_INTERVAL)
-
-#define MYNET_REXT_WMAC_CALDATA_OFFSET 0x1000
-
-#define MYNET_REXT_NVRAM_ADDR 0x1f7e0010
-#define MYNET_REXT_NVRAM_SIZE 0xfff0
-
-#define MYNET_REXT_ART_ADDR 0x1f7f0000
-
-static const char *mynet_rext_part_probes[] = {
- "cybertan",
- NULL,
-};
-
-static struct flash_platform_data mynet_rext_flash_data = {
- .type = "s25fl064k",
- .part_probes = mynet_rext_part_probes,
-};
-
-static struct gpio_led mynet_rext_leds_gpio[] __initdata = {
- {
- .name = "wd:blue:power",
- .gpio = MYNET_REXT_GPIO_LED_POWER,
- .active_low = 0,
- },
- {
- .name = "wd:blue:wireless",
- .gpio = MYNET_REXT_GPIO_LED_WIFI,
- .active_low = 1,
- },
- {
- .name = "wd:blue:ethernet",
- .gpio = MYNET_REXT_GPIO_LED_ETHERNET,
- .active_low = 1,
- },
- {
- .name = "wd:blue:quality1",
- .gpio = MYNET_REXT_GPIO_LED_RF_QTY1,
- .active_low = 1,
- },
- {
- .name = "wd:blue:quality2",
- .gpio = MYNET_REXT_GPIO_LED_RF_QTY2,
- .active_low = 1,
- },
- {
- .name = "wd:blue:quality3",
- .gpio = MYNET_REXT_GPIO_LED_RF_QTY3,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button mynet_rext_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MYNET_REXT_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MYNET_REXT_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "RF Band switch",
- .type = EV_SW,
- .code = BTN_1,
- .debounce_interval = MYNET_REXT_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MYNET_REXT_GPIO_SW_RF,
- },
-};
-
-static struct at803x_platform_data mynet_rext_at803x_data = {
- .disable_smarteee = 0,
- .enable_rgmii_rx_delay = 1,
- .enable_rgmii_tx_delay = 0,
- .fixup_rgmii_tx_delay = 1,
-};
-
-static struct mdio_board_info mynet_rext_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 4,
- .platform_data = &mynet_rext_at803x_data,
- },
-};
-
-static void mynet_rext_get_mac(const char *name, char *mac)
-{
- u8 *nvram = (u8 *) KSEG1ADDR(MYNET_REXT_NVRAM_ADDR);
- int err;
-
- err = ath79_nvram_parse_mac_addr(nvram, MYNET_REXT_NVRAM_SIZE,
- name, mac);
- if (err)
- pr_err("no MAC address found for %s\n", name);
-}
-
-static void __init mynet_rext_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(MYNET_REXT_ART_ADDR);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(&mynet_rext_flash_data);
-
- /* GPIO configuration from drivers/char/GPIO8.c */
-
- ath79_gpio_output_select(MYNET_REXT_GPIO_LED_POWER,
- AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(MYNET_REXT_GPIO_LED_WIFI,
- AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY1,
- AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY2,
- AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(MYNET_REXT_GPIO_LED_RF_QTY3,
- AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(MYNET_REXT_GPIO_LED_ETHERNET,
- AR934X_GPIO_OUT_GPIO);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(mynet_rext_leds_gpio),
- mynet_rext_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, MYNET_REXT_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mynet_rext_gpio_keys),
- mynet_rext_gpio_keys);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_RXD_DELAY |
- AR934X_ETH_CFG_RDV_DELAY);
-
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(mynet_rext_mdio0_info,
- ARRAY_SIZE(mynet_rext_mdio0_info));
-
- /* LAN */
- mynet_rext_get_mac("et0macaddr=", ath79_eth0_data.mac_addr);
-
- /* GMAC0 is connected to an external PHY on Port 4 */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_pll_data.pll_10 = 0x00001313; /* athrs_mac.c */
- ath79_eth0_pll_data.pll_1000 = 0x0e000000; /* athrs_mac.c */
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_register_eth(0);
-
- /* WLAN */
- mynet_rext_get_mac("wl0_hwaddr=", tmpmac);
- ap91_pci_init(art + MYNET_REXT_WMAC_CALDATA_OFFSET, tmpmac);
-}
-
-MIPS_MACHINE(ATH79_MACH_MYNET_REXT, "MYNET-REXT",
- "WD My Net Wi-Fi Range Extender", mynet_rext_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w04nu.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w04nu.c
deleted file mode 100644
index c2460ce33c..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w04nu.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * Planex MZK-W04NU board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define MZK_W04NU_GPIO_LED_USB 0
-#define MZK_W04NU_GPIO_LED_STATUS 1
-#define MZK_W04NU_GPIO_LED_WPS 3
-#define MZK_W04NU_GPIO_LED_WLAN 6
-#define MZK_W04NU_GPIO_LED_AP 15
-#define MZK_W04NU_GPIO_LED_ROUTER 16
-
-#define MZK_W04NU_GPIO_BTN_APROUTER 5
-#define MZK_W04NU_GPIO_BTN_WPS 12
-#define MZK_W04NU_GPIO_BTN_RESET 21
-
-#define MZK_W04NU_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MZK_W04NU_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W04NU_KEYS_POLL_INTERVAL)
-
-static struct gpio_led mzk_w04nu_leds_gpio[] __initdata = {
- {
- .name = "planex:green:status",
- .gpio = MZK_W04NU_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "planex:blue:wps",
- .gpio = MZK_W04NU_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "planex:green:wlan",
- .gpio = MZK_W04NU_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "planex:green:usb",
- .gpio = MZK_W04NU_GPIO_LED_USB,
- .active_low = 1,
- }, {
- .name = "planex:green:ap",
- .gpio = MZK_W04NU_GPIO_LED_AP,
- .active_low = 1,
- }, {
- .name = "planex:green:router",
- .gpio = MZK_W04NU_GPIO_LED_ROUTER,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button mzk_w04nu_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZK_W04NU_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZK_W04NU_GPIO_BTN_WPS,
- .active_low = 1,
- }, {
- .desc = "aprouter",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = MZK_W04NU_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZK_W04NU_GPIO_BTN_APROUTER,
- .active_low = 0,
- }
-};
-
-#define MZK_W04NU_WAN_PHYMASK BIT(4)
-#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK)
-
-static void __init mzk_w04nu_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_mdio(0, MZK_W04NU_MDIO_MASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.has_ar8216 = 1;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w04nu_leds_gpio),
- mzk_w04nu_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, MZK_W04NU_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mzk_w04nu_gpio_keys),
- mzk_w04nu_gpio_keys);
- ath79_register_usb();
-
- ath79_register_wmac(eeprom, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU",
- mzk_w04nu_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w300nh.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w300nh.c
deleted file mode 100644
index 8c40365283..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mzk-w300nh.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Planex MZK-W300NH board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define MZK_W300NH_GPIO_LED_STATUS 1
-#define MZK_W300NH_GPIO_LED_WPS 3
-#define MZK_W300NH_GPIO_LED_WLAN 6
-#define MZK_W300NH_GPIO_LED_AP_GREEN 15
-#define MZK_W300NH_GPIO_LED_AP_AMBER 16
-
-#define MZK_W300NH_GPIO_BTN_APROUTER 5
-#define MZK_W300NH_GPIO_BTN_WPS 12
-#define MZK_W300NH_GPIO_BTN_RESET 21
-
-#define MZK_W300NH_KEYS_POLL_INTERVAL 20 /* msecs */
-#define MZK_W300NH_KEYS_DEBOUNCE_INTERVAL (3 * MZK_W300NH_KEYS_POLL_INTERVAL)
-
-static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
- {
- .name = "planex:green:status",
- .gpio = MZK_W300NH_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "planex:blue:wps",
- .gpio = MZK_W300NH_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "planex:green:wlan",
- .gpio = MZK_W300NH_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "planex:green:aprouter",
- .gpio = MZK_W300NH_GPIO_LED_AP_GREEN,
- }, {
- .name = "planex:amber:aprouter",
- .gpio = MZK_W300NH_GPIO_LED_AP_AMBER,
- }
-};
-
-static struct gpio_keys_button mzk_w300nh_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZK_W300NH_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZK_W300NH_GPIO_BTN_WPS,
- .active_low = 1,
- }, {
- .desc = "aprouter",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = MZK_W300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = MZK_W300NH_GPIO_BTN_APROUTER,
- .active_low = 0,
- }
-};
-
-#define MZK_W300NH_WAN_PHYMASK BIT(4)
-#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK)
-
-static void __init mzk_w300nh_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_mdio(0, MZK_W300NH_MDIO_MASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.has_ar8216 = 1;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
- mzk_w300nh_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, MZK_W300NH_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(mzk_w300nh_gpio_keys),
- mzk_w300nh_gpio_keys);
- ath79_register_wmac(eeprom, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH",
- mzk_w300nh_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-n5q.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-n5q.c
deleted file mode 100644
index 895fc32933..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-n5q.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * ALFA Network N5Q board support
- *
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define N5Q_GPIO_LED_LAN 19
-#define N5Q_GPIO_LED_SIGNAL1 0
-#define N5Q_GPIO_LED_SIGNAL2 1
-#define N5Q_GPIO_LED_SIGNAL3 2
-#define N5Q_GPIO_LED_SIGNAL4 3
-#define N5Q_GPIO_LED_WAN 18
-#define N5Q_GPIO_LED_WLAN 12
-
-#define N5Q_GPIO_WDT_EN 16
-#define N5Q_GPIO_WDT_IN 17
-
-#define N5Q_GPIO_BTN_RESET 11
-
-#define N5Q_MAC0_OFFSET 0
-#define N5Q_MAC1_OFFSET 6
-#define N5Q_WMAC_CALDATA_OFFSET 0x1000
-
-#define N5Q_KEYS_POLL_INTERVAL 20
-#define N5Q_KEYS_DEBOUNCE_INTERVAL (3 * N5Q_KEYS_POLL_INTERVAL)
-
-static struct gpio_led n5q_leds_gpio[] __initdata = {
- {
- .name = "n5q:green:lan",
- .gpio = N5Q_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "n5q:red:signal1",
- .gpio = N5Q_GPIO_LED_SIGNAL1,
- .active_low = 1,
- }, {
- .name = "n5q:orange:signal2",
- .gpio = N5Q_GPIO_LED_SIGNAL2,
- .active_low = 1,
- }, {
- .name = "n5q:green:signal3",
- .gpio = N5Q_GPIO_LED_SIGNAL3,
- .active_low = 1,
- }, {
- .name = "n5q:green:signal4",
- .gpio = N5Q_GPIO_LED_SIGNAL4,
- .active_low = 1,
- }, {
- .name = "n5q:green:wan",
- .gpio = N5Q_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "n5q:green:wlan",
- .gpio = N5Q_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button n5q_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = N5Q_KEYS_DEBOUNCE_INTERVAL,
- .gpio = N5Q_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init n5q_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1f070000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_mdio(1, 0x0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = 0xf7;
-
- /* LAN */
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_init_mac(ath79_eth1_data.mac_addr, art + N5Q_MAC1_OFFSET, 0);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr, art + N5Q_MAC0_OFFSET, 0);
- ath79_register_eth(0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(n5q_leds_gpio),
- n5q_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, N5Q_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(n5q_gpio_keys),
- n5q_gpio_keys);
-
- gpio_request_one(N5Q_GPIO_WDT_IN,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "WDT input");
-
- gpio_request_one(N5Q_GPIO_WDT_EN,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "WDT enable");
-
- ath79_register_wmac(art + N5Q_WMAC_CALDATA_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_N5Q, "N5Q", "ALFA Network N5Q", n5q_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c
deleted file mode 100644
index ca007779ec..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg460n.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * Zyxel NBG 460N/550N/550NH board support
- *
- * Copyright (C) 2010 Michael Kurz <michi.kurz@googlemail.com>
- *
- * based on mach-tl-wr1043nd.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-/* LEDs */
-#define NBG460N_GPIO_LED_WPS 3
-#define NBG460N_GPIO_LED_WAN 6
-#define NBG460N_GPIO_LED_POWER 14
-#define NBG460N_GPIO_LED_WLAN 15
-
-/* Buttons */
-#define NBG460N_GPIO_BTN_WPS 12
-#define NBG460N_GPIO_BTN_RESET 21
-
-#define NBG460N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define NBG460N_KEYS_DEBOUNCE_INTERVAL (3 * NBG460N_KEYS_POLL_INTERVAL)
-
-/* RTC chip PCF8563 I2C interface */
-#define NBG460N_GPIO_PCF8563_SDA 8
-#define NBG460N_GPIO_PCF8563_SCK 7
-
-/* Switch configuration I2C interface */
-#define NBG460N_GPIO_RTL8366_SDA 16
-#define NBG460N_GPIO_RTL8366_SCK 18
-
-static struct mtd_partition nbg460n_partitions[] = {
- {
- .name = "Bootbase",
- .offset = 0,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "U-Boot Config",
- .offset = 0x010000,
- .size = 0x030000,
- }, {
- .name = "U-Boot",
- .offset = 0x040000,
- .size = 0x030000,
- }, {
- .name = "linux",
- .offset = 0x070000,
- .size = 0x0e0000,
- }, {
- .name = "rootfs",
- .offset = 0x150000,
- .size = 0x2a0000,
- }, {
- .name = "CalibData",
- .offset = 0x3f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x070000,
- .size = 0x380000,
- }
-};
-
-static struct flash_platform_data nbg460n_flash_data = {
- .parts = nbg460n_partitions,
- .nr_parts = ARRAY_SIZE(nbg460n_partitions),
-};
-
-static struct gpio_led nbg460n_leds_gpio[] __initdata = {
- {
- .name = "nbg460n:green:power",
- .gpio = NBG460N_GPIO_LED_POWER,
- .active_low = 0,
- .default_trigger = "default-on",
- }, {
- .name = "nbg460n:green:wps",
- .gpio = NBG460N_GPIO_LED_WPS,
- .active_low = 0,
- }, {
- .name = "nbg460n:green:wlan",
- .gpio = NBG460N_GPIO_LED_WLAN,
- .active_low = 0,
- }, {
- /* Not really for controlling the LED,
- when set low the LED blinks uncontrollable */
- .name = "nbg460n:green:wan",
- .gpio = NBG460N_GPIO_LED_WAN,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button nbg460n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG460N_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = NBG460N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG460N_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static struct i2c_gpio_platform_data nbg460n_i2c_device_platdata = {
- .sda_pin = NBG460N_GPIO_PCF8563_SDA,
- .scl_pin = NBG460N_GPIO_PCF8563_SCK,
- .udelay = 10,
-};
-
-static struct platform_device nbg460n_i2c_device = {
- .name = "i2c-gpio",
- .id = -1,
- .num_resources = 0,
- .resource = NULL,
- .dev = {
- .platform_data = &nbg460n_i2c_device_platdata,
- },
-};
-
-static struct i2c_board_info nbg460n_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("pcf8563", 0x51),
- },
-};
-
-static void nbg460n_i2c_init(void)
-{
- /* The gpio interface */
- platform_device_register(&nbg460n_i2c_device);
- /* I2C devices */
- i2c_register_board_info(0, nbg460n_i2c_devs,
- ARRAY_SIZE(nbg460n_i2c_devs));
-}
-
-
-static struct rtl8366_platform_data nbg460n_rtl8366s_data = {
- .gpio_sda = NBG460N_GPIO_RTL8366_SDA,
- .gpio_sck = NBG460N_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device nbg460n_rtl8366s_device = {
- .name = RTL8366S_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &nbg460n_rtl8366s_data,
- }
-};
-
-static void __init nbg460n_setup(void)
-{
- /* end of bootloader sector contains mac address */
- u8 *mac = (u8 *) KSEG1ADDR(0x1fc0fff8);
- /* last sector contains wlan calib data */
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* LAN Port */
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- /* WAN Port */
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
- ath79_eth1_data.mii_bus_dev = &nbg460n_rtl8366s_device.dev;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- /* register the switch phy */
- platform_device_register(&nbg460n_rtl8366s_device);
-
- /* register flash */
- ath79_register_m25p80(&nbg460n_flash_data);
-
- ath79_register_wmac(eeprom, mac);
-
- /* register RTC chip */
- nbg460n_i2c_init();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(nbg460n_leds_gpio),
- nbg460n_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, NBG460N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(nbg460n_gpio_keys),
- nbg460n_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_NBG460N, "NBG460N", "Zyxel NBG460N/550N/550NH",
- nbg460n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c
deleted file mode 100644
index b0fbb78d82..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-nbg6716.c
+++ /dev/null
@@ -1,385 +0,0 @@
-/*
- * ZyXEL NBG6716/NBG6616 board support
- *
- * Based on the Qualcomm Atheros AP135/AP136 reference board support code
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2013 Andre Valentin <avalentin@marcant.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/version.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/platform/ar934x_nfc.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-nfc.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define NBG6716_GPIO_LED_INTERNET 18
-#define NBG6716_GPIO_LED_POWER 15
-#define NBG6716_GPIO_LED_USB1 4
-#define NBG6716_GPIO_LED_USB2 13
-#define NBG6716_GPIO_LED_WIFI2G 19
-#define NBG6716_GPIO_LED_WIFI5G 17
-#define NBG6716_GPIO_LED_WPS 21
-
-#define NBG6716_GPIO_BTN_RESET 23
-#define NBG6716_GPIO_BTN_RFKILL 1
-#define NBG6716_GPIO_BTN_USB1 0
-#define NBG6716_GPIO_BTN_USB2 14
-#define NBG6716_GPIO_BTN_WPS 22
-
-#define NBG6716_GPIO_USB_POWER 16
-
-#define NBG6716_KEYS_POLL_INTERVAL 20 /* msecs */
-#define NBG6716_KEYS_DEBOUNCE_INTERVAL (3 * NBG6716_KEYS_POLL_INTERVAL)
-
-#define NBG6716_MAC0_OFFSET 0
-#define NBG6716_MAC1_OFFSET 6
-#define NBG6716_WMAC_CALDATA_OFFSET 0x1000
-#define NBG6716_PCIE_CALDATA_OFFSET 0x5000
-
-/* NBG6616 has a different GPIO usage as it does not have USB Buttons */
-#define NBG6616_GPIO_LED_USB0 14
-#define NBG6616_GPIO_LED_USB1 21
-#define NBG6616_GPIO_LED_WPS 0
-
-static struct gpio_led nbg6716_leds_gpio[] __initdata = {
- {
- .name = "nbg6716:white:internet",
- .gpio = NBG6716_GPIO_LED_INTERNET,
- .active_low = 1,
- },
- {
- .name = "nbg6716:white:power",
- .gpio = NBG6716_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "nbg6716:white:usb1",
- .gpio = NBG6716_GPIO_LED_USB1,
- .active_low = 1,
- },
- {
- .name = "nbg6716:white:usb2",
- .gpio = NBG6716_GPIO_LED_USB2,
- .active_low = 1,
- },
- {
- .name = "nbg6716:white:wifi2g",
- .gpio = NBG6716_GPIO_LED_WIFI2G,
- .active_low = 1,
- },
- {
- .name = "nbg6716:white:wifi5g",
- .gpio = NBG6716_GPIO_LED_WIFI5G,
- .active_low = 1,
- },
- {
- .name = "nbg6716:white:wps",
- .gpio = NBG6716_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button nbg6716_gpio_keys[] __initdata = {
- {
- .desc = "RESET button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG6716_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "RFKILL button",
- .type = EV_SW,
- .code = KEY_RFKILL,
- .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG6716_GPIO_BTN_RFKILL,
- .active_low = 0,
- },
- {
- .desc = "USB1 eject button",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG6716_GPIO_BTN_USB1,
- .active_low = 1,
- },
- {
- .desc = "USB2 eject button",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG6716_GPIO_BTN_USB2,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG6716_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-
-
-static struct gpio_led nbg6616_leds_gpio[] __initdata = {
- {
- .name = "nbg6616:green:power",
- .gpio = NBG6716_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "nbg6616:green:usb2",
- .gpio = NBG6616_GPIO_LED_USB0,
- .active_low = 1,
- },
- {
- .name = "nbg6616:green:usb1",
- .gpio = NBG6616_GPIO_LED_USB1,
- .active_low = 1,
- },
- {
- .name = "nbg6616:green:wifi2g",
- .gpio = NBG6716_GPIO_LED_WIFI2G,
- .active_low = 1,
- },
- {
- .name = "nbg6616:green:wifi5g",
- .gpio = NBG6716_GPIO_LED_WIFI5G,
- .active_low = 1,
- },
- {
- .name = "nbg6616:green:wps",
- .gpio = NBG6616_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button nbg6616_gpio_keys[] __initdata = {
- {
- .desc = "RESET button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG6716_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "RFKILL button",
- .type = EV_SW,
- .code = KEY_RFKILL,
- .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG6716_GPIO_BTN_RFKILL,
- .active_low = 0,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = NBG6716_KEYS_DEBOUNCE_INTERVAL,
- .gpio = NBG6716_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-
-static struct ar8327_pad_cfg nbg6716_ar8327_pad0_cfg;
-static struct ar8327_pad_cfg nbg6716_ar8327_pad6_cfg;
-static struct ar8327_led_cfg nbg6716_ar8327_led_cfg;
-
-static struct ar8327_platform_data nbg6716_ar8327_data = {
- .pad0_cfg = &nbg6716_ar8327_pad0_cfg,
- .pad6_cfg = &nbg6716_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &nbg6716_ar8327_led_cfg
-};
-
-static struct mdio_board_info nbg6716_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &nbg6716_ar8327_data,
- },
-};
-
-static void nbg6716_get_mac(void* nvram_addr, const char *name, char *mac)
-{
- u8 *nvram = (u8 *) KSEG1ADDR(nvram_addr);
- int err;
-
- err = ath79_nvram_parse_mac_addr(nvram, 0x10000,
- name, mac);
- if (err)
- pr_err("no MAC address found for %s\n", name);
-}
-
-static void __init nbg6716_common_setup(u32 leds_num, struct gpio_led* leds,
- u32 keys_num,
- struct gpio_keys_button* keys,
- void* art_addr, void* nvram)
-{
- u8 *art = (u8 *) KSEG1ADDR(art_addr);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, leds_num, leds);
- ath79_register_gpio_keys_polled(-1, NBG6716_KEYS_POLL_INTERVAL,
- keys_num, keys);
-
- ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
- ath79_register_nfc();
-
- gpio_request_one(NBG6716_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-
- ath79_register_usb();
-
- nbg6716_get_mac(nvram, "ethaddr=", tmpmac);
-
- ath79_register_pci();
-
- ath79_register_wmac(art + NBG6716_WMAC_CALDATA_OFFSET, tmpmac);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, tmpmac, 2);
- ath79_init_mac(ath79_eth1_data.mac_addr, tmpmac, 3);
-
- mdiobus_register_board_info(nbg6716_mdio0_info,
- ARRAY_SIZE(nbg6716_mdio0_info));
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(1);
-}
-
-static void __init nbg6716_010_setup(void)
-{
- /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
- nbg6716_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
- nbg6716_ar8327_pad0_cfg.txclk_delay_en = true;
- nbg6716_ar8327_pad0_cfg.rxclk_delay_en = true;
- nbg6716_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
- nbg6716_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-
- /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
- nbg6716_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
- nbg6716_ar8327_pad6_cfg.rxclk_delay_en = true;
- nbg6716_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
-
- ath79_eth0_pll_data.pll_1000 = 0xa6000000;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- nbg6716_ar8327_led_cfg.open_drain = 0;
- nbg6716_ar8327_led_cfg.led_ctrl0 = 0xffb7ffb7;
- nbg6716_ar8327_led_cfg.led_ctrl1 = 0xffb7ffb7;
- nbg6716_ar8327_led_cfg.led_ctrl2 = 0xffb7ffb7;
- nbg6716_ar8327_led_cfg.led_ctrl3 = 0x03ffff00;
-
- nbg6716_common_setup(ARRAY_SIZE(nbg6716_leds_gpio), nbg6716_leds_gpio,
- ARRAY_SIZE(nbg6716_gpio_keys), nbg6716_gpio_keys,
- (void*) 0x1f050000, (void*) 0x1f040000);
-}
-
-static void __init nbg6616_010_setup(void)
-{
- /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
- nbg6716_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
- nbg6716_ar8327_pad0_cfg.txclk_delay_en = true;
- nbg6716_ar8327_pad0_cfg.rxclk_delay_en = true;
- nbg6716_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
- nbg6716_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-
- /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
- nbg6716_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
- nbg6716_ar8327_pad6_cfg.rxclk_delay_en = true;
- nbg6716_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
-
- ath79_eth0_pll_data.pll_1000 = 0xa6000000;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- nbg6716_ar8327_led_cfg.open_drain = 0;
- nbg6716_ar8327_led_cfg.led_ctrl0 = 0xffb7ffb7;
- nbg6716_ar8327_led_cfg.led_ctrl1 = 0xffb7ffb7;
- nbg6716_ar8327_led_cfg.led_ctrl2 = 0xffb7ffb7;
- nbg6716_ar8327_led_cfg.led_ctrl3 = 0x03ffff00;
-
-
- nbg6716_common_setup(ARRAY_SIZE(nbg6616_leds_gpio), nbg6616_leds_gpio,
- ARRAY_SIZE(nbg6616_gpio_keys), nbg6616_gpio_keys,
- (void*) 0x1f040000, (void*) 0x1f030000);
-}
-
-
-MIPS_MACHINE(ATH79_MACH_NBG6716, "NBG6716",
- "Zyxel NBG6716",
- nbg6716_010_setup);
-
-MIPS_MACHINE(ATH79_MACH_NBG6616, "NBG6616",
- "Zyxel NBG6616",
- nbg6616_010_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c
deleted file mode 100644
index c888f7d1a8..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * OpenMesh OM2P support
- *
- * Copyright (C) 2011 Marek Lindner <marek@open-mesh.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define OM2P_GPIO_LED_POWER 0
-#define OM2P_GPIO_LED_GREEN 13
-#define OM2P_GPIO_LED_RED 14
-#define OM2P_GPIO_LED_YELLOW 15
-#define OM2P_GPIO_LED_LAN 16
-#define OM2P_GPIO_LED_WAN 17
-#define OM2P_GPIO_BTN_RESET 1
-
-#define OM2P_KEYS_POLL_INTERVAL 20 /* msecs */
-#define OM2P_KEYS_DEBOUNCE_INTERVAL (3 * OM2P_KEYS_POLL_INTERVAL)
-
-#define OM2P_WAN_PHYMASK BIT(4)
-
-#define OM2P_LC_GPIO_LED_POWER 1
-#define OM2P_LC_GPIO_LED_GREEN 15
-#define OM2P_LC_GPIO_LED_RED 16
-#define OM2P_LC_GPIO_LED_YELLOW 0
-#define OM2P_LC_GPIO_LED_LAN 13
-#define OM2P_LC_GPIO_LED_WAN 17
-#define OM2P_LC_GPIO_BTN_RESET 12
-
-#define OM2Pv4_GPIO_LED_POWER 0
-#define OM2Pv4_GPIO_LED_GREEN 2
-#define OM2Pv4_GPIO_LED_RED 4
-#define OM2Pv4_GPIO_LED_YELLOW 3
-#define OM2Pv4_GPIO_LED_LAN 14
-#define OM2Pv4_GPIO_LED_WAN 13
-#define OM2Pv4_GPIO_BTN_RESET 1
-
-#define OM2P_WMAC_CALDATA_OFFSET 0x1000
-
-static struct flash_platform_data om2p_flash_data = {
- .type = "s25sl12800",
- .name = "ar7240-nor0",
-};
-
-static struct gpio_led om2p_leds_gpio[] __initdata = {
- {
- .name = "om2p:blue:power",
- .gpio = OM2P_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "om2p:red:wifi",
- .gpio = OM2P_GPIO_LED_RED,
- .active_low = 1,
- }, {
- .name = "om2p:yellow:wifi",
- .gpio = OM2P_GPIO_LED_YELLOW,
- .active_low = 1,
- }, {
- .name = "om2p:green:wifi",
- .gpio = OM2P_GPIO_LED_GREEN,
- .active_low = 1,
- }, {
- .name = "om2p:blue:lan",
- .gpio = OM2P_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "om2p:blue:wan",
- .gpio = OM2P_GPIO_LED_WAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button om2p_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL,
- .gpio = OM2P_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init om2p_setup(void)
-{
- u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
- u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
- u8 *ee = (u8 *)KSEG1ADDR(0x1ffc1000);
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_m25p80(&om2p_flash_data);
-
- ath79_register_mdio(0, ~OM2P_WAN_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ap91_pci_init(ee, NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
- om2p_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(om2p_gpio_keys),
- om2p_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_OM2P, "OM2P", "OpenMesh OM2P", om2p_setup);
-
-
-static struct flash_platform_data om2p_lc_flash_data = {
- .type = "s25sl12800",
-};
-
-static void __init om2p_lc_setup(void)
-{
- u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
- u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
- u8 *art = (u8 *)KSEG1ADDR(0x1ffc1000);
- u32 t;
-
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
- t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
- ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
-
- ath79_register_m25p80(&om2p_lc_flash_data);
-
- om2p_leds_gpio[0].gpio = OM2P_LC_GPIO_LED_POWER;
- om2p_leds_gpio[1].gpio = OM2P_LC_GPIO_LED_RED;
- om2p_leds_gpio[2].gpio = OM2P_LC_GPIO_LED_YELLOW;
- om2p_leds_gpio[3].gpio = OM2P_LC_GPIO_LED_GREEN;
- om2p_leds_gpio[4].gpio = OM2P_LC_GPIO_LED_LAN;
- om2p_leds_gpio[5].gpio = OM2P_LC_GPIO_LED_WAN;
- ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
- om2p_leds_gpio);
-
- om2p_gpio_keys[0].gpio = OM2P_LC_GPIO_BTN_RESET;
- ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(om2p_gpio_keys),
- om2p_gpio_keys);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_wmac(art, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_OM2P_LC, "OM2P-LC", "OpenMesh OM2P LC", om2p_lc_setup);
-MIPS_MACHINE(ATH79_MACH_OM2Pv2, "OM2Pv2", "OpenMesh OM2Pv2", om2p_lc_setup);
-
-static void __init om2p_hs_setup(void)
-{
- u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
- u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
- u8 *art = (u8 *)KSEG1ADDR(0x1ffc1000);
-
- /* make lan / wan leds software controllable */
- ath79_gpio_output_select(OM2P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(OM2P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO);
-
- /* enable reset button */
- ath79_gpio_output_select(OM2P_GPIO_BTN_RESET, AR934X_GPIO_OUT_GPIO);
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
-
- om2p_leds_gpio[4].gpio = OM2P_GPIO_LED_WAN;
- om2p_leds_gpio[5].gpio = OM2P_GPIO_LED_LAN;
-
- ath79_register_m25p80(&om2p_lc_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(om2p_leds_gpio),
- om2p_leds_gpio);
- ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(om2p_gpio_keys),
- om2p_gpio_keys);
-
- ath79_register_wmac(art, NULL);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-
- /* GMAC0 is connected to the PHY0 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_OM2P_HS, "OM2P-HS", "OpenMesh OM2P HS", om2p_hs_setup);
-MIPS_MACHINE(ATH79_MACH_OM2P_HSv2, "OM2P-HSv2", "OpenMesh OM2P HSv2", om2p_hs_setup);
-MIPS_MACHINE(ATH79_MACH_OM2P_HSv3, "OM2P-HSv3", "OpenMesh OM2P HSv3", om2p_hs_setup);
-
-static struct flash_platform_data om2pv4_flash_data = {
- .type = "s25sl12800",
-};
-
-static struct gpio_led om2pv4_leds_gpio[] __initdata = {
- {
- .name = "om2p:blue:power",
- .gpio = OM2Pv4_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "om2p:red:wifi",
- .gpio = OM2Pv4_GPIO_LED_RED,
- .active_low = 1,
- }, {
- .name = "om2p:yellow:wifi",
- .gpio = OM2Pv4_GPIO_LED_YELLOW,
- .active_low = 1,
- }, {
- .name = "om2p:green:wifi",
- .gpio = OM2Pv4_GPIO_LED_GREEN,
- .active_low = 1,
- }, {
- .name = "om2p:blue:lan",
- .gpio = OM2Pv4_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "om2p:blue:wan",
- .gpio = OM2Pv4_GPIO_LED_WAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button om2pv4_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = OM2P_KEYS_DEBOUNCE_INTERVAL,
- .gpio = OM2Pv4_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init om2pv4_setup(void)
-{
- u8 *mac1 = (u8 *)KSEG1ADDR(0x1ffc0000);
- u8 *mac2 = (u8 *)KSEG1ADDR(0x1ffc0000 + ETH_ALEN);
- u8 *art = (u8 *)KSEG1ADDR(0x1ffc0000);
- u8 wmac[6];
-
- ath79_register_m25p80(&om2pv4_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(om2pv4_leds_gpio),
- om2pv4_leds_gpio);
- ath79_register_gpio_keys_polled(-1, OM2P_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(om2pv4_gpio_keys),
- om2pv4_gpio_keys);
-
- ath79_init_mac(wmac, art, 0x02);
- ath79_register_wmac(art + OM2P_WMAC_CALDATA_OFFSET, wmac);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
- ath79_register_eth(0);
-
- /* WAN */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_OM2Pv4, "OM2Pv4", "OpenMesh OM2Pv4", om2pv4_setup);
-MIPS_MACHINE(ATH79_MACH_OM2P_HSv4, "OM2P-HSv4", "OpenMesh OM2P HSv4", om2pv4_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c
deleted file mode 100644
index 61ff6a755d..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5p.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * OpenMesh OM5P support
- *
- * Copyright (C) 2013 Marek Lindner <marek@open-mesh.com>
- * Copyright (C) 2014 Sven Eckelmann <sven@open-mesh.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define OM5P_GPIO_LED_POWER 13
-#define OM5P_GPIO_LED_GREEN 16
-#define OM5P_GPIO_LED_RED 19
-#define OM5P_GPIO_LED_YELLOW 17
-#define OM5P_GPIO_LED_LAN 14
-#define OM5P_GPIO_LED_WAN 15
-#define OM5P_GPIO_BTN_RESET 4
-#define OM5P_GPIO_I2C_SCL 20
-#define OM5P_GPIO_I2C_SDA 21
-
-#define OM5P_KEYS_POLL_INTERVAL 20 /* msecs */
-#define OM5P_KEYS_DEBOUNCE_INTERVAL (3 * OM5P_KEYS_POLL_INTERVAL)
-
-#define OM5P_WMAC_CALDATA_OFFSET 0x1000
-#define OM5P_PCI_CALDATA_OFFSET 0x5000
-
-static struct gpio_led om5p_leds_gpio[] __initdata = {
- {
- .name = "om5p:blue:power",
- .gpio = OM5P_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "om5p:red:wifi",
- .gpio = OM5P_GPIO_LED_RED,
- .active_low = 1,
- }, {
- .name = "om5p:yellow:wifi",
- .gpio = OM5P_GPIO_LED_YELLOW,
- .active_low = 1,
- }, {
- .name = "om5p:green:wifi",
- .gpio = OM5P_GPIO_LED_GREEN,
- .active_low = 1,
- }, {
- .name = "om5p:blue:lan",
- .gpio = OM5P_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "om5p:blue:wan",
- .gpio = OM5P_GPIO_LED_WAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button om5p_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = OM5P_KEYS_DEBOUNCE_INTERVAL,
- .gpio = OM5P_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct flash_platform_data om5p_flash_data = {
- .type = "mx25l12805d",
-};
-
-static void __init om5p_setup(void)
-{
- u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
- u8 mac[6];
-
- /* make lan / wan leds software controllable */
- ath79_gpio_output_select(OM5P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(OM5P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO);
-
- ath79_register_m25p80(&om5p_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(om5p_leds_gpio),
- om5p_leds_gpio);
- ath79_register_gpio_keys_polled(-1, OM5P_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(om5p_gpio_keys),
- om5p_gpio_keys);
-
- ath79_init_mac(mac, art, 2);
- ath79_register_wmac(art + OM5P_WMAC_CALDATA_OFFSET, mac);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art, 1);
-
- /* GMAC0 is connected to the PHY0 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_OM5P, "OM5P", "OpenMesh OM5P", om5p_setup);
-
-static struct i2c_gpio_platform_data om5pan_i2c_device_platdata = {
- .sda_pin = OM5P_GPIO_I2C_SDA,
- .scl_pin = OM5P_GPIO_I2C_SCL,
- .udelay = 10,
- .sda_is_open_drain = 1,
- .scl_is_open_drain = 1,
-};
-
-static struct platform_device om5pan_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &om5pan_i2c_device_platdata,
- },
-};
-
-static struct i2c_board_info om5pan_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("tmp423", 0x4c),
- },
-};
-
-static struct at803x_platform_data om5p_an_at803x_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 1,
- .enable_rgmii_tx_delay = 1,
-};
-
-static struct mdio_board_info om5p_an_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 7,
- .platform_data = &om5p_an_at803x_data,
- },
-};
-
-static void __init om5p_an_setup(void)
-{
- u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
- u8 mac[6];
-
- /* temperature sensor */
- platform_device_register(&om5pan_i2c_device);
- i2c_register_board_info(0, om5pan_i2c_devs,
- ARRAY_SIZE(om5pan_i2c_devs));
-
- /* make lan / wan leds software controllable */
- ath79_gpio_output_select(OM5P_GPIO_LED_LAN, AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(OM5P_GPIO_LED_WAN, AR934X_GPIO_OUT_GPIO);
-
- ath79_register_m25p80(&om5p_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(om5p_leds_gpio),
- om5p_leds_gpio);
-
- ath79_init_mac(mac, art, 0x02);
- ath79_register_wmac(art + OM5P_WMAC_CALDATA_OFFSET, mac);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
- ath79_setup_ar934x_eth_rx_delay(2, 2);
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- mdiobus_register_board_info(om5p_an_mdio0_info,
- ARRAY_SIZE(om5p_an_mdio0_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00);
- ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01);
-
- /* GMAC0 is connected to the PHY7 */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_mask = BIT(7);
- ath79_eth0_pll_data.pll_1000 = 0x02000000;
- ath79_eth0_pll_data.pll_100 = 0x00000101;
- ath79_eth0_pll_data.pll_10 = 0x00001313;
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(1);
-
- ath79_init_mac(mac, art, 0x10);
- ap91_pci_init(art + OM5P_PCI_CALDATA_OFFSET, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_OM5P_AN, "OM5P-AN", "OpenMesh OM5P AN", om5p_an_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pac.c
deleted file mode 100644
index 10771ea7b1..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pac.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * OpenMesh OM5P-AC support
- *
- * Copyright (C) 2013 Marek Lindner <marek@open-mesh.com>
- * Copyright (C) 2014 Sven Eckelmann <sven@open-mesh.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define OM5PAC_GPIO_LED_POWER 18
-#define OM5PAC_GPIO_LED_GREEN 21
-#define OM5PAC_GPIO_LED_RED 23
-#define OM5PAC_GPIO_LED_YELLOW 22
-#define OM5PAC_GPIO_LED_LAN 20
-#define OM5PAC_GPIO_LED_WAN 19
-#define OM5PAC_GPIO_I2C_SCL 12
-#define OM5PAC_GPIO_I2C_SDA 11
-
-#define OM5PAC_KEYS_POLL_INTERVAL 20 /* msecs */
-#define OM5PAC_KEYS_DEBOUNCE_INTERVAL (3 * OM5PAC_KEYS_POLL_INTERVAL)
-
-#define OM5PAC_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led om5pac_leds_gpio[] __initdata = {
- {
- .name = "om5pac:blue:power",
- .gpio = OM5PAC_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "om5pac:red:wifi",
- .gpio = OM5PAC_GPIO_LED_RED,
- .active_low = 1,
- }, {
- .name = "om5pac:yellow:wifi",
- .gpio = OM5PAC_GPIO_LED_YELLOW,
- .active_low = 1,
- }, {
- .name = "om5pac:green:wifi",
- .gpio = OM5PAC_GPIO_LED_GREEN,
- .active_low = 1,
- }, {
- .name = "om5pac:blue:lan",
- .gpio = OM5PAC_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "om5pac:blue:wan",
- .gpio = OM5PAC_GPIO_LED_WAN,
- .active_low = 1,
- }
-};
-
-static struct flash_platform_data om5pac_flash_data = {
- .type = "mx25l12805d",
-};
-
-static struct i2c_gpio_platform_data om5pac_i2c_device_platdata = {
- .sda_pin = OM5PAC_GPIO_I2C_SDA,
- .scl_pin = OM5PAC_GPIO_I2C_SCL,
- .udelay = 10,
- .sda_is_open_drain = 1,
- .scl_is_open_drain = 1,
-};
-
-static struct platform_device om5pac_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &om5pac_i2c_device_platdata,
- },
-};
-
-static struct i2c_board_info om5pac_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("tmp423", 0x4c),
- },
-};
-
-static struct at803x_platform_data om5pac_at803x_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 1,
- .enable_rgmii_tx_delay = 1,
-};
-
-static struct mdio_board_info om5pac_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 1,
- .platform_data = &om5pac_at803x_data,
- },
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 2,
- .platform_data = &om5pac_at803x_data,
- },
-};
-
-static void __init om5p_ac_setup_qca955x_eth_cfg(u32 mask,
- unsigned int rxd,
- unsigned int rxdv,
- unsigned int txd,
- unsigned int txe)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
- t = mask;
- t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT;
- t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT;
- t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT;
- t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT;
-
- __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-
- iounmap(base);
-}
-
-static void __init om5p_ac_setup(void)
-{
- u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
- u8 mac[6];
-
- /* temperature sensor */
- platform_device_register(&om5pac_i2c_device);
- i2c_register_board_info(0, om5pac_i2c_devs,
- ARRAY_SIZE(om5pac_i2c_devs));
-
- ath79_gpio_output_select(OM5PAC_GPIO_LED_WAN, QCA955X_GPIO_OUT_GPIO);
-
- ath79_register_m25p80(&om5pac_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(om5pac_leds_gpio),
- om5pac_leds_gpio);
-
- ath79_init_mac(mac, art, 0x02);
- ath79_register_wmac(art + OM5PAC_WMAC_CALDATA_OFFSET, mac);
-
- om5p_ac_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 3, 3, 0, 0);
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(om5pac_mdio0_info,
- ARRAY_SIZE(om5pac_mdio0_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00);
- ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01);
-
- /* GMAC0 is connected to the PHY1 */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_mask = BIT(1);
- ath79_eth0_pll_data.pll_1000 = 0x82000101;
- ath79_eth0_pll_data.pll_100 = 0x80000101;
- ath79_eth0_pll_data.pll_10 = 0x80001313;
- ath79_register_eth(0);
-
- /* GMAC1 is connected to MDIO1 in SGMII mode */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth1_data.phy_mask = BIT(2);
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
- ath79_eth1_pll_data.pll_100 = 0x80000101;
- ath79_eth1_pll_data.pll_10 = 0x80001313;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_register_eth(1);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_OM5P_AC, "OM5P-AC", "OpenMesh OM5P AC", om5p_ac_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pacv2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pacv2.c
deleted file mode 100644
index f72700138f..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om5pacv2.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * OpenMesh OM5P-ACv2 support
- *
- * Copyright (C) 2013 Marek Lindner <marek@open-mesh.com>
- * Copyright (C) 2014-2016 Sven Eckelmann <sven@open-mesh.com>
- * Copyright (C) 2015 Open-Mesh - Jim Collar <jim.collar@eqware.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define OM5PACV2_GPIO_LED_POWER 14
-#define OM5PACV2_GPIO_LED_GREEN 13
-#define OM5PACV2_GPIO_LED_RED 23
-#define OM5PACV2_GPIO_LED_YELLOW 15
-#define OM5PACV2_GPIO_BTN_RESET 1
-#define OM5PACV2_GPIO_I2C_SCL 18
-#define OM5PACV2_GPIO_I2C_SDA 19
-#define OM5PACV2_GPIO_PA_DCDC 2
-#define OM5PACV2_GPIO_PA_HIGH 16
-
-#define OM5PACV2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define OM5PACV2_KEYS_DEBOUNCE_INTERVAL (3 * OM5PACV2_KEYS_POLL_INTERVAL)
-
-#define OM5PACV2_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led om5pacv2_leds_gpio[] __initdata = {
- {
- .name = "om5pac:blue:power",
- .gpio = OM5PACV2_GPIO_LED_POWER,
- .active_low = 1,
- }, {
- .name = "om5pac:red:wifi",
- .gpio = OM5PACV2_GPIO_LED_RED,
- .active_low = 1,
- }, {
- .name = "om5pac:yellow:wifi",
- .gpio = OM5PACV2_GPIO_LED_YELLOW,
- .active_low = 1,
- }, {
- .name = "om5pac:green:wifi",
- .gpio = OM5PACV2_GPIO_LED_GREEN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button om5pacv2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = OM5PACV2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = OM5PACV2_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct i2c_gpio_platform_data om5pacv2_i2c_device_platdata = {
- .sda_pin = OM5PACV2_GPIO_I2C_SDA,
- .scl_pin = OM5PACV2_GPIO_I2C_SCL,
- .udelay = 10,
- .sda_is_open_drain = 1,
- .scl_is_open_drain = 1,
-};
-
-static struct platform_device om5pacv2_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &om5pacv2_i2c_device_platdata,
- },
-};
-
-static struct i2c_board_info om5pacv2_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("tmp423", 0x4e),
- },
-};
-
-static struct flash_platform_data om5pacv2_flash_data = {
- .type = "mx25l12805d",
-};
-
-static struct at803x_platform_data om5pacv2_an_at803x_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 1,
- .enable_rgmii_tx_delay = 1,
-};
-
-static struct at803x_platform_data om5pacv2_an_at8031_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 1,
- .enable_rgmii_tx_delay = 1,
-};
-
-static struct mdio_board_info om5pacv2_an_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 4,
- .platform_data = &om5pacv2_an_at803x_data,
- },
- {
- .bus_id = "ag71xx-mdio.1",
- .mdio_addr = 1,
- .platform_data = &om5pacv2_an_at8031_data,
- },
-};
-
-static void __init om5p_acv2_setup_qca955x_eth_cfg(u32 mask,
- unsigned int rxd,
- unsigned int rxdv,
- unsigned int txd,
- unsigned int txe)
-{
- void __iomem *base;
- u32 t;
-
- base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
- t = mask;
- t |= rxd << QCA955X_ETH_CFG_RXD_DELAY_SHIFT;
- t |= rxdv << QCA955X_ETH_CFG_RDV_DELAY_SHIFT;
- t |= txd << QCA955X_ETH_CFG_TXD_DELAY_SHIFT;
- t |= txe << QCA955X_ETH_CFG_TXE_DELAY_SHIFT;
-
- __raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
-
- iounmap(base);
-}
-
-static void __init om5p_acv2_setup(void)
-{
- u8 *art = (u8 *)KSEG1ADDR(0x1fff0000);
- u8 mac[6];
-
- /* power amplifier high power, 4.2V at RFFM4203/4503 instead of 3.3 */
- ath79_gpio_function_enable(QCA955X_GPIO_FUNC_JTAG_DISABLE);
- ath79_gpio_output_select(OM5PACV2_GPIO_PA_DCDC, QCA955X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(OM5PACV2_GPIO_PA_HIGH, QCA955X_GPIO_OUT_GPIO);
- gpio_request_one(OM5PACV2_GPIO_PA_DCDC, GPIOF_OUT_INIT_HIGH,
- "PA DC/DC");
- gpio_request_one(OM5PACV2_GPIO_PA_HIGH, GPIOF_OUT_INIT_HIGH, "PA HIGH");
-
- /* temperature sensor */
- platform_device_register(&om5pacv2_i2c_device);
- i2c_register_board_info(0, om5pacv2_i2c_devs,
- ARRAY_SIZE(om5pacv2_i2c_devs));
-
- ath79_register_m25p80(&om5pacv2_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(om5pacv2_leds_gpio),
- om5pacv2_leds_gpio);
- ath79_register_gpio_keys_polled(-1, OM5PACV2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(om5pacv2_gpio_keys),
- om5pacv2_gpio_keys);
-
- ath79_init_mac(mac, art, 0x02);
- ath79_register_wmac(art + OM5PACV2_WMAC_CALDATA_OFFSET, mac);
-
- om5p_acv2_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN, 2, 2, 0, 0);
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- mdiobus_register_board_info(om5pacv2_an_mdio0_info,
- ARRAY_SIZE(om5pacv2_an_mdio0_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 0x00);
- ath79_init_mac(ath79_eth1_data.mac_addr, art, 0x01);
-
- /* GMAC0 is connected to the PHY4 */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_pll_data.pll_1000 = 0x82000101;
- ath79_eth0_pll_data.pll_100 = 0x80000101;
- ath79_eth0_pll_data.pll_10 = 0x80001313;
- ath79_register_eth(0);
-
- /* GMAC1 is connected to MDIO1 in SGMII mode */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_eth1_data.phy_mask = BIT(1);
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
- ath79_eth1_pll_data.pll_100 = 0x80000101;
- ath79_eth1_pll_data.pll_10 = 0x80001313;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_register_eth(1);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_OM5P_ACv2, "OM5P-ACv2", "OpenMesh OM5P ACv2", om5p_acv2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-g1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-g1.c
deleted file mode 100644
index 25ca27cba8..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-g1.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * OMYlink OMY-G1 board support
- *
- * Copyright (C) 2016 L. D. Pinney <ldpinney@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define OMY_G1_GPIO_LED_WLAN 13
-#define OMY_G1_GPIO_LED_WAN 18
-#define OMY_G1_GPIO_LED_LAN 19
-
-#define OMY_G1_GPIO_USB_POWER 4
-
-#define OMY_G1_GPIO_BTN_RESET 17
-
-#define OMY_G1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define OMY_G1_KEYS_DEBOUNCE_INTERVAL (3 * OMY_G1_KEYS_POLL_INTERVAL)
-
-static const char *omy_g1_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data omy_g1_flash_data = {
- .part_probes = omy_g1_part_probes,
-};
-
-static struct gpio_led omy_g1_leds_gpio[] __initdata = {
- {
- .name = "omy:green:wlan",
- .gpio = OMY_G1_GPIO_LED_WLAN,
- .active_low = 1,
- },{
- .name = "omy:green:wan",
- .gpio = OMY_G1_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "omy:green:lan",
- .gpio = OMY_G1_GPIO_LED_LAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button omy_g1_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = OMY_G1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = OMY_G1_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init omy_g1_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
- AR934X_GPIO_FUNC_CLK_OBS4_EN);
-
- ath79_register_m25p80(&omy_g1_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(omy_g1_leds_gpio),
- omy_g1_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, OMY_G1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(omy_g1_gpio_keys),
- omy_g1_gpio_keys);
-
- ath79_gpio_output_select(OMY_G1_GPIO_USB_POWER,
- AR934X_GPIO_OUT_GPIO);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
-
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, mac);
-
- ath79_gpio_output_select(OMY_G1_GPIO_USB_POWER,
- AR934X_GPIO_OUT_GPIO);
-
- gpio_request_one(OMY_G1_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_OMY_G1, "OMY-G1", "OMYlink OMY-G1",
- omy_g1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-x1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-x1.c
deleted file mode 100644
index c99e3d7457..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-omy-x1.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * OMYlink OMY-X1 board support
- *
- * Copyright (C) 2016 L. D. Pinney <ldpinney@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-
-
-#define OMY_X1_GPIO_LED_POWER 19
-#define OMY_X1_GPIO_LED_WAN 22
-
-#define OMY_X1_GPIO_BTN_RESET 17
-
-#define OMY_X1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define OMY_X1_KEYS_DEBOUNCE_INTERVAL (3 * OMY_X1_KEYS_POLL_INTERVAL)
-
-static const char *omy_x1_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data omy_x1_flash_data = {
- .part_probes = omy_x1_part_probes,
-};
-
-static struct gpio_led omy_x1_leds_gpio[] __initdata = {
- {
- .name = "omy:green:wan",
- .gpio = OMY_X1_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "omy:green:power",
- .gpio = OMY_X1_GPIO_LED_POWER,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button omy_x1_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = OMY_X1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = OMY_X1_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init omy_x1_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
- AR934X_GPIO_FUNC_CLK_OBS4_EN);
-
- ath79_register_m25p80(&omy_x1_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(omy_x1_leds_gpio),
- omy_x1_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, OMY_X1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(omy_x1_gpio_keys),
- omy_x1_gpio_keys);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
-
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, mac);
-
-}
-
-MIPS_MACHINE(ATH79_MACH_OMY_X1, "OMY-X1", "OMYlink OMY-X1",
- omy_x1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-onion-omega.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-onion-omega.c
deleted file mode 100644
index c739840377..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-onion-omega.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * Onion Omega board support
- *
- * Copyright (C) 2015 Boken Lin <bl@onion.io>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define OMEGA_GPIO_LED_SYSTEM 27
-#define OMEGA_GPIO_BTN_RESET 11
-
-#define OMEGA_GPIO_USB_POWER 8
-
-#define OMEGA_KEYS_POLL_INTERVAL 20 /* msecs */
-#define OMEGA_KEYS_DEBOUNCE_INTERVAL (3 * OMEGA_KEYS_POLL_INTERVAL)
-
-static const char *omega_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data omega_flash_data = {
- .part_probes = omega_part_probes,
-};
-
-static struct gpio_led omega_leds_gpio[] __initdata = {
- {
- .name = "onion:amber:system",
- .gpio = OMEGA_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button omega_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = OMEGA_KEYS_DEBOUNCE_INTERVAL,
- .gpio = OMEGA_GPIO_BTN_RESET,
- .active_low = 0,
- }
-};
-
-static void __init onion_omega_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&omega_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(omega_leds_gpio),
- omega_leds_gpio);
- ath79_register_gpio_keys_polled(-1, OMEGA_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(omega_gpio_keys),
- omega_gpio_keys);
-
- gpio_request_one(OMEGA_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_ONION_OMEGA, "ONION-OMEGA", "Onion Omega", onion_omega_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-pb42.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-pb42.c
deleted file mode 100644
index 3a350e90a1..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-pb42.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Atheros PB42 board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define PB42_KEYS_POLL_INTERVAL 20 /* msecs */
-#define PB42_KEYS_DEBOUNCE_INTERVAL (3 * PB42_KEYS_POLL_INTERVAL)
-
-#define PB42_GPIO_BTN_SW4 8
-#define PB42_GPIO_BTN_SW5 3
-
-static struct gpio_keys_button pb42_gpio_keys[] __initdata = {
- {
- .desc = "sw4",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PB42_GPIO_BTN_SW4,
- .active_low = 1,
- }, {
- .desc = "sw5",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = PB42_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PB42_GPIO_BTN_SW5,
- .active_low = 1,
- }
-};
-
-static const char *pb42_part_probes[] = {
- "RedBoot",
- NULL,
-};
-
-static struct flash_platform_data pb42_flash_data = {
- .part_probes = pb42_part_probes,
-};
-
-#define PB42_WAN_PHYMASK BIT(20)
-#define PB42_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19))
-#define PB42_MDIO_PHYMASK (PB42_LAN_PHYMASK | PB42_WAN_PHYMASK)
-
-static void __init pb42_init(void)
-{
- ath79_register_m25p80(&pb42_flash_data);
-
- ath79_register_mdio(0, ~PB42_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = PB42_WAN_PHYMASK;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.speed = SPEED_100;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_gpio_keys_polled(-1, PB42_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(pb42_gpio_keys),
- pb42_gpio_keys);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_PB42, "PB42", "Atheros PB42", pb42_init);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c
deleted file mode 100644
index 56769bfb61..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-pqi-air-pen.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * PQI Air Pen stick support
- *
- * Copyright (C) 2016 YuheiOKAWA <tochiro.srchack@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define PQI_AIR_PEN_GPIO_LED_WLAN 0
-#define PQI_AIR_PEN_GPIO_LED_WPS 23
-
-#define PQI_AIR_PEN_GPIO_BTN_WPS 22
-#define PQI_AIR_PEN_GPIO_BTN_RESET 12
-
-#define PQI_AIR_PEN_KEYS_POLL_INTERVAL 20 /* msecs */
-#define PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL (3 * PQI_AIR_PEN_KEYS_POLL_INTERVAL)
-
-#define PQI_AIR_PEN_WMAC_CALDATA_OFFSET 0x1000
-#define PQI_AIR_PEN_LAN_MAC_OFFSET 0x1002
-#define PQI_AIR_PEN_WMAC_MAC_OFFSET 0x1002
-
-static struct gpio_led pqi_air_pen_leds_gpio[] __initdata = {
- {
- .name = "pqi-air-pen:blue:wlan",
- .gpio = PQI_AIR_PEN_GPIO_LED_WLAN,
- .active_low = 0,
- },
- {
- .name = "pqi-air-pen:blue:wps",
- .gpio = PQI_AIR_PEN_GPIO_LED_WPS,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button pqi_air_pen_gpio_keys[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PQI_AIR_PEN_GPIO_BTN_WPS,
- .active_low = 0,
- },
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = PQI_AIR_PEN_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PQI_AIR_PEN_GPIO_BTN_RESET,
- .active_low = 0,
- },
-};
-
-static void __init pqi_air_pen_setup(void)
-{
- /* ART base address */
- u8 *art = (u8 *) KSEG1ADDR(0x9f050000);
-
- /* register flash. */
- ath79_register_m25p80(NULL);
-
- /* register wireless mac with cal data */
- ath79_register_wmac(art + PQI_AIR_PEN_WMAC_CALDATA_OFFSET, art + PQI_AIR_PEN_WMAC_MAC_OFFSET);
-
- /* false PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- /* register gpio LEDs and keys */
- ath79_register_leds_gpio(-1, ARRAY_SIZE(pqi_air_pen_leds_gpio),
- pqi_air_pen_leds_gpio);
- ath79_register_gpio_keys_polled(-1, PQI_AIR_PEN_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(pqi_air_pen_gpio_keys),
- pqi_air_pen_gpio_keys);
-
- /* enable usb */
- ath79_register_usb();
-
- /* register eth0 as LAN */
- ath79_init_mac(ath79_eth0_data.mac_addr, art + PQI_AIR_PEN_LAN_MAC_OFFSET, 0);
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_PQI_AIR_PEN, "PQI-AIR-PEN", "PQI Air Pen",pqi_air_pen_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c
deleted file mode 100644
index a682f35e2c..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-qihoo-c301.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Qihoo 360 C301 board support
- *
- * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2014 Weijie Gao <hackpascal@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define QIHOO_C301_GPIO_LED_STATUS_GREEN 0
-#define QIHOO_C301_GPIO_LED_STATUS_RED 11
-
-#define QIHOO_C301_GPIO_LED_WAN 1
-#define QIHOO_C301_GPIO_LED_LAN1 2
-#define QIHOO_C301_GPIO_LED_LAN2 3
-#define QIHOO_C301_GPIO_ETH_LEN_EN 18
-
-#define QIHOO_C301_GPIO_BTN_RESET 16
-
-#define QIHOO_C301_GPIO_USB_POWER 19
-
-#define QIHOO_C301_GPIO_SPI_CS1 12
-
-#define QIHOO_C301_GPIO_EXTERNAL_LNA0 14
-#define QIHOO_C301_GPIO_EXTERNAL_LNA1 15
-
-#define QIHOO_C301_KEYS_POLL_INTERVAL 20 /* msecs */
-#define QIHOO_C301_KEYS_DEBOUNCE_INTERVAL \
- (3 * QIHOO_C301_KEYS_POLL_INTERVAL)
-
-#define QIHOO_C301_WMAC_CALDATA_OFFSET 0x1000
-
-#define QIHOO_C301_NVRAM_ADDR 0x1f058010
-#define QIHOO_C301_NVRAM_SIZE 0x7ff0
-
-static struct gpio_led qihoo_c301_leds_gpio[] __initdata = {
- {
- .name = "qihoo:green:status",
- .gpio = QIHOO_C301_GPIO_LED_STATUS_GREEN,
- .active_low = 1,
- },
- {
- .name = "qihoo:red:status",
- .gpio = QIHOO_C301_GPIO_LED_STATUS_RED,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button qihoo_c301_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = QIHOO_C301_KEYS_DEBOUNCE_INTERVAL,
- .gpio = QIHOO_C301_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct flash_platform_data flash __initdata = {NULL, NULL, 0};
-
-static void qihoo_c301_get_mac(const char *name, char *mac)
-{
- u8 *nvram = (u8 *) KSEG1ADDR(QIHOO_C301_NVRAM_ADDR);
- int err;
-
- err = ath79_nvram_parse_mac_addr(nvram, QIHOO_C301_NVRAM_SIZE,
- name, mac);
- if (err)
- pr_err("no MAC address found for %s\n", name);
-}
-
-static void __init qihoo_c301_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80_multi(&flash);
-
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
-
- ath79_gpio_output_select(QIHOO_C301_GPIO_LED_WAN,
- AR934X_GPIO_OUT_LED_LINK4);
- ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN1,
- AR934X_GPIO_OUT_LED_LINK1);
- ath79_gpio_output_select(QIHOO_C301_GPIO_LED_LAN2,
- AR934X_GPIO_OUT_LED_LINK2);
-
- ath79_gpio_output_select(QIHOO_C301_GPIO_SPI_CS1,
- AR934X_GPIO_OUT_SPI_CS1);
-
- gpio_request_one(QIHOO_C301_GPIO_ETH_LEN_EN,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "Ethernet LED enable");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(qihoo_c301_leds_gpio),
- qihoo_c301_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, QIHOO_C301_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(qihoo_c301_gpio_keys),
- qihoo_c301_gpio_keys);
-
- ath79_wmac_set_ext_lna_gpio(0, QIHOO_C301_GPIO_EXTERNAL_LNA0);
- ath79_wmac_set_ext_lna_gpio(1, QIHOO_C301_GPIO_EXTERNAL_LNA1);
-
- qihoo_c301_get_mac("wlan24mac=", tmpmac);
- ath79_register_wmac(art + QIHOO_C301_WMAC_CALDATA_OFFSET, tmpmac);
-
- ath79_register_pci();
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE |
- AR934X_ETH_CFG_SW_PHY_SWAP);
-
- ath79_register_mdio(1, 0x0);
-
- /* LAN */
- qihoo_c301_get_mac("lanmac=", ath79_eth1_data.mac_addr);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-
- ath79_register_eth(1);
-
- /* WAN */
- qihoo_c301_get_mac("wanmac=", ath79_eth0_data.mac_addr);
-
- /* GMAC0 is connected to the PHY4 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
-
- ath79_register_eth(0);
-
- gpio_request_one(QIHOO_C301_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_QIHOO_C301, "QIHOO-C301", "Qihoo 360 C301",
- qihoo_c301_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-r36a.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-r36a.c
deleted file mode 100644
index b3493e2c42..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-r36a.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * ALFA Network R36A board support
- *
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define R36A_GPIO_LED_LAN 4
-#define R36A_GPIO_LED_STATUS 14
-#define R36A_GPIO_LED_USB 12
-#define R36A_GPIO_LED_WAN 16
-#define R36A_GPIO_LED_WLAN 15
-
-#define R36A_GPIO_WDT_EN 1
-#define R36A_GPIO_WDT_IN 0
-#define R36A_GPIO_USB_PWR 3
-
-#define R36A_GPIO_BTN_RESET 2
-#define R36A_GPIO_BTN_RFKILL 17
-
-#define R36A_KEYS_POLL_INTERVAL 20
-#define R36A_KEYS_DEBOUNCE_INTERVAL (3 * R36A_KEYS_POLL_INTERVAL)
-
-#define R36A_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led r36a_leds_gpio[] __initdata = {
- {
- .name = "r36a:blue:lan",
- .gpio = R36A_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "r36a:blue:status",
- .gpio = R36A_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "r36a:blue:usb",
- .gpio = R36A_GPIO_LED_USB,
- .active_low = 1,
- }, {
- .name = "r36a:blue:wan",
- .gpio = R36A_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "r36a:blue:wlan",
- .gpio = R36A_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button r36a_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = R36A_KEYS_DEBOUNCE_INTERVAL,
- .gpio = R36A_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "rfkill",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = R36A_KEYS_DEBOUNCE_INTERVAL,
- .gpio = R36A_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
-};
-
-static void __init r36a_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1f070000);
-
- ath79_register_m25p80(NULL);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = 0xf7;
-
- /* LAN */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr, art, 0);
- ath79_register_eth(0);
-
- /* WAN */
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_init_mac(ath79_eth1_data.mac_addr, art, 1);
- ath79_register_eth(1);
-
- /* Disable JTAG (enables GPIO0-3) */
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(r36a_leds_gpio),
- r36a_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, R36A_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(r36a_gpio_keys),
- r36a_gpio_keys);
-
- gpio_request_one(R36A_GPIO_WDT_IN,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "WDT input");
-
- gpio_request_one(R36A_GPIO_WDT_EN,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "WDT enable");
-
- gpio_request_one(R36A_GPIO_USB_PWR,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-
- ath79_register_wmac(art + R36A_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_R36A, "R36A", "ALFA Network R36A", r36a_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-r602n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-r602n.c
deleted file mode 100644
index 4aef0a932a..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-r602n.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * P&W (Shenzhen Progress&Win Technologies) R602N and CPE505N boards support
- *
- * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com>
- *
- * Based on mach-zbt-we1526.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define PW_GPIO_BTN_RESET 17
-
-#define PW_KEYS_POLL_INTERVAL 20 /* msecs */
-#define PW_KEYS_DEBOUNCE_INTERVAL (3 * PW_KEYS_POLL_INTERVAL)
-
-#define PW_MAC0_OFFSET 0x0
-#define PW_MAC1_OFFSET 0x6
-#define PW_WMAC_CALDATA_OFFSET 0x1000
-
-/* CPE505N GPIO LEDs */
-#define CPE505N_GPIO_LED_DIAG 12
-#define CPE505N_GPIO_LED_LAN 11
-#define CPE505N_GPIO_LED_STATUS 14
-#define CPE505N_GPIO_LED_WAN 4
-#define CPE505N_GPIO_LED_WLAN 15
-
-static struct gpio_led cpe505n_leds_gpio[] __initdata = {
- {
- .name = "cpe505n:red:diag",
- .gpio = CPE505N_GPIO_LED_DIAG,
- .active_low = 1,
- }, {
- .name = "cpe505n:green:lan",
- .gpio = CPE505N_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "cpe505n:green:status",
- .gpio = CPE505N_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "cpe505n:green:wan",
- .gpio = CPE505N_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "cpe505n:blue:wlan",
- .gpio = CPE505N_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static void __init cpe505n_gpio_setup(void)
-{
- /* For LED on GPIO4 */
- ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
- ath79_gpio_output_select(CPE505N_GPIO_LED_WAN, 0);
-
- ath79_gpio_direction_select(CPE505N_GPIO_LED_DIAG, true);
- ath79_gpio_direction_select(CPE505N_GPIO_LED_LAN, true);
- ath79_gpio_direction_select(CPE505N_GPIO_LED_STATUS, true);
- ath79_gpio_direction_select(CPE505N_GPIO_LED_WAN, true);
- ath79_gpio_direction_select(CPE505N_GPIO_LED_WLAN, true);
-
- /* Mute LEDs */
- gpio_set_value(CPE505N_GPIO_LED_DIAG, 1);
- gpio_set_value(CPE505N_GPIO_LED_LAN, 1);
- gpio_set_value(CPE505N_GPIO_LED_STATUS, 1);
- gpio_set_value(CPE505N_GPIO_LED_WAN, 1);
- gpio_set_value(CPE505N_GPIO_LED_WLAN, 1);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe505n_leds_gpio),
- cpe505n_leds_gpio);
-}
-
-/* R602N GPIO LEDs */
-#define R602N_GPIO_LED_LAN1 16
-#define R602N_GPIO_LED_LAN2 15
-#define R602N_GPIO_LED_LAN3 14
-#define R602N_GPIO_LED_LAN4 11
-#define R602N_GPIO_LED_WAN 4
-#define R602N_GPIO_LED_WLAN 12
-
-static struct gpio_led r602n_leds_gpio[] __initdata = {
- {
- .name = "r602n:green:lan1",
- .gpio = R602N_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "r602n:green:lan2",
- .gpio = R602N_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "r602n:green:lan3",
- .gpio = R602N_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "r602n:green:lan4",
- .gpio = R602N_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "r602n:green:wan",
- .gpio = R602N_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "r602n:green:wlan",
- .gpio = R602N_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static void __init r602n_gpio_setup(void)
-{
- /* For LED on GPIO4 */
- ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
- ath79_gpio_output_select(R602N_GPIO_LED_WAN, 0);
-
- ath79_gpio_direction_select(R602N_GPIO_LED_LAN1, true);
- ath79_gpio_direction_select(R602N_GPIO_LED_LAN2, true);
- ath79_gpio_direction_select(R602N_GPIO_LED_LAN3, true);
- ath79_gpio_direction_select(R602N_GPIO_LED_LAN4, true);
- ath79_gpio_direction_select(R602N_GPIO_LED_WAN, true);
- ath79_gpio_direction_select(R602N_GPIO_LED_WLAN, true);
-
- /* Mute LEDs */
- gpio_set_value(R602N_GPIO_LED_LAN1, 1);
- gpio_set_value(R602N_GPIO_LED_LAN2, 1);
- gpio_set_value(R602N_GPIO_LED_LAN3, 1);
- gpio_set_value(R602N_GPIO_LED_LAN4, 1);
- gpio_set_value(R602N_GPIO_LED_WAN, 1);
- gpio_set_value(R602N_GPIO_LED_WLAN, 1);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(r602n_leds_gpio),
- r602n_leds_gpio);
-}
-
-static struct gpio_keys_button pw_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = PW_KEYS_DEBOUNCE_INTERVAL,
- .gpio = PW_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init r602n_cpe505n_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN */
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_init_mac(ath79_eth1_data.mac_addr, art + PW_MAC1_OFFSET, 0);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr, art + PW_MAC0_OFFSET, 0);
- ath79_register_eth(0);
-
- ath79_register_wmac(art + PW_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_gpio_keys_polled(-1, PW_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(pw_gpio_keys),
- pw_gpio_keys);
-}
-
-static void __init cpe505n_setup(void)
-{
- r602n_cpe505n_setup();
-
- cpe505n_gpio_setup();
-}
-
-static void __init r602n_setup(void)
-{
- r602n_cpe505n_setup();
-
- r602n_gpio_setup();
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_CPE505N, "CPE505N", "P&W CPE505N", cpe505n_setup);
-MIPS_MACHINE(ATH79_MACH_R602N, "R602N", "P&W R602N", r602n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-r6100.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-r6100.c
deleted file mode 100644
index c1f0e2c400..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-r6100.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * NETGEAR R6100 board support
- *
- * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/platform/ar934x_nfc.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define R6100_GPIO_LED_WLAN 0
-#define R6100_GPIO_LED_USB 11
-#define R6100_GPIO_LED_WAN_GREEN 13
-#define R6100_GPIO_LED_POWER_AMBER 14
-#define R6100_GPIO_LED_WAN_AMBER 15
-#define R6100_GPIO_LED_POWER_GREEN 17
-
-#define R6100_GPIO_BTN_WIRELESS 1
-#define R6100_GPIO_BTN_WPS 3
-#define R6100_GPIO_BTN_RESET 12
-
-#define R6100_GPIO_USB_POWER 16
-
-#define R6100_KEYS_POLL_INTERVAL 20 /* msecs */
-#define R6100_KEYS_DEBOUNCE_INTERVAL (3 * R6100_KEYS_POLL_INTERVAL)
-
-static struct gpio_led r6100_leds_gpio[] __initdata = {
- {
- .name = "netgear:green:power",
- .gpio = R6100_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- },
- {
- .name = "netgear:amber:power",
- .gpio = R6100_GPIO_LED_POWER_AMBER,
- .active_low = 1,
- },
- {
- .name = "netgear:green:wan",
- .gpio = R6100_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "netgear:amber:wan",
- .gpio = R6100_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- },
- {
- .name = "netgear:blue:usb",
- .gpio = R6100_GPIO_LED_USB,
- .active_low = 1,
- },
- {
- .name = "netgear:blue:wlan",
- .gpio = R6100_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button r6100_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = R6100_KEYS_DEBOUNCE_INTERVAL,
- .gpio = R6100_GPIO_BTN_RESET,
- .active_low = 0,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = R6100_KEYS_DEBOUNCE_INTERVAL,
- .gpio = R6100_GPIO_BTN_WPS,
- .active_low = 0,
- },
- {
- .desc = "RFKILL switch",
- .type = EV_SW,
- .code = KEY_RFKILL,
- .debounce_interval = R6100_KEYS_DEBOUNCE_INTERVAL,
- .gpio = R6100_GPIO_BTN_WIRELESS,
- .active_low = 0,
- },
-};
-
-static void __init r6100_setup(void)
-{
- ath79_register_leds_gpio(-1, ARRAY_SIZE(r6100_leds_gpio),
- r6100_leds_gpio);
- ath79_register_gpio_keys_polled(-1, R6100_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(r6100_gpio_keys),
- r6100_gpio_keys);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
-
- ath79_register_mdio(1, 0x0);
-
- /* GMAC0 is connected to the PHY0 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-
- gpio_request_one(R6100_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-
- ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
- ath79_register_nfc();
-
- ath79_register_usb();
-
- ath79_register_wmac_simple();
-
- ap91_pci_init_simple();
-}
-
-MIPS_MACHINE(ATH79_MACH_R6100, "R6100", "NETGEAR R6100",
- r6100_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c
deleted file mode 100644
index 1730a29f33..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rambutan.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * 8devices Rambutan board support
- *
- * Copyright (C) 2017 Mantas Pucka <mantas@8devices.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <linux/platform/ar934x_nfc.h>
-#include <linux/ar8216_platform.h>
-#include <linux/platform_data/phy-at803x.h>
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-static struct at803x_platform_data rambutan_ar8032_data = {
- .has_reset_gpio = 1,
- .reset_gpio = 17,
-};
-
-static struct mdio_board_info rambutan_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &rambutan_ar8032_data,
- },
-};
-
-static struct at803x_platform_data rambutan_ar8033_data = {
- .has_reset_gpio = 1,
- .override_sgmii_aneg = 1,
- .reset_gpio = 23,
-};
-
-static struct mdio_board_info rambutan_mdio1_info[] = {
- {
- .bus_id = "ag71xx-mdio.1",
- .mdio_addr = 0,
- .platform_data = &rambutan_ar8033_data,
- },
-};
-
-static void __init rambutan_setup(void)
-{
- ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
- ath79_register_nfc();
- ath79_register_usb();
- ath79_register_pci();
- ath79_register_wmac_simple();
-
- mdiobus_register_board_info(rambutan_mdio0_info,
- ARRAY_SIZE(rambutan_mdio0_info));
- mdiobus_register_board_info(rambutan_mdio1_info,
- ARRAY_SIZE(rambutan_mdio1_info));
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_register_eth(0);
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.phy_mask = BIT(0);
- ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_eth1_data.enable_sgmii_fixup = 1;
- ath79_eth1_pll_data.pll_1000 = 0x17000000;
- ath79_eth1_pll_data.pll_10 = 0x1313;
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_RAMBUTAN, "RAMBUTAN", "8devices Rambutan board",
- rambutan_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c
deleted file mode 100644
index aee0fb2014..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb2011.c
+++ /dev/null
@@ -1,406 +0,0 @@
-/*
- * MikroTik RouterBOARD 2011 support
- *
- * Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be>
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt) "rb2011: " fmt
-
-#include <linux/version.h>
-#include <linux/phy.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <linux/mtd/mtd.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/routerboot.h>
-#include <linux/gpio.h>
-#include <linux/version.h>
-
-#include <asm/prom.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "routerboot.h"
-
-#define RB2011_GPIO_NAND_NCE 14
-#define RB2011_GPIO_SFP_LOS 21
-
-#define RB_ROUTERBOOT_OFFSET 0x0000
-#define RB_ROUTERBOOT_MIN_SIZE 0xb000
-#define RB_HARD_CFG_SIZE 0x1000
-#define RB_BIOS_OFFSET 0xd000
-#define RB_BIOS_SIZE 0x1000
-#define RB_SOFT_CFG_OFFSET 0xf000
-#define RB_SOFT_CFG_SIZE 0x1000
-
-#define RB_ART_SIZE 0x10000
-
-#define RB2011_FLAG_SFP BIT(0)
-#define RB2011_FLAG_USB BIT(1)
-#define RB2011_FLAG_WLAN BIT(2)
-
-static struct mtd_partition rb2011_spi_partitions[] = {
- {
- .name = "routerboot",
- .offset = RB_ROUTERBOOT_OFFSET,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "hard_config",
- .size = RB_HARD_CFG_SIZE,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "bios",
- .offset = RB_BIOS_OFFSET,
- .size = RB_BIOS_SIZE,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "soft_config",
- .size = RB_SOFT_CFG_SIZE,
- }
-};
-
-static void __init rb2011_init_partitions(const struct rb_info *info)
-{
- rb2011_spi_partitions[0].size = info->hard_cfg_offs;
- rb2011_spi_partitions[1].offset = info->hard_cfg_offs;
- rb2011_spi_partitions[3].offset = info->soft_cfg_offs;
-}
-
-static struct mtd_partition rb2011_nand_partitions[] = {
- {
- .name = "booter",
- .offset = 0,
- .size = (256 * 1024),
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .offset = (256 * 1024),
- .size = (4 * 1024 * 1024) - (256 * 1024),
- },
- {
- .name = "ubi",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct flash_platform_data rb2011_spi_flash_data = {
- .parts = rb2011_spi_partitions,
- .nr_parts = ARRAY_SIZE(rb2011_spi_partitions),
-};
-
-static struct ar8327_pad_cfg rb2011_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL3,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
-};
-
-static struct ar8327_pad_cfg rb2011_ar8327_pad6_cfg;
-static struct ar8327_sgmii_cfg rb2011_ar8327_sgmii_cfg;
-
-static struct ar8327_led_cfg rb2011_ar8327_led_cfg = {
- .led_ctrl0 = 0xc731c731,
- .led_ctrl1 = 0x00000000,
- .led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x0030c300,
- .open_drain = false,
-};
-
-static const struct ar8327_led_info rb2011_ar8327_leds[] = {
- AR8327_LED_INFO(PHY0_0, HW, "rb:green:eth1"),
- AR8327_LED_INFO(PHY1_0, HW, "rb:green:eth2"),
- AR8327_LED_INFO(PHY2_0, HW, "rb:green:eth3"),
- AR8327_LED_INFO(PHY3_0, HW, "rb:green:eth4"),
- AR8327_LED_INFO(PHY4_0, HW, "rb:green:eth5"),
- AR8327_LED_INFO(PHY0_1, SW, "rb:green:eth6"),
- AR8327_LED_INFO(PHY1_1, SW, "rb:green:eth7"),
- AR8327_LED_INFO(PHY2_1, SW, "rb:green:eth8"),
- AR8327_LED_INFO(PHY3_1, SW, "rb:green:eth9"),
- AR8327_LED_INFO(PHY4_1, SW, "rb:green:eth10"),
- AR8327_LED_INFO(PHY4_2, SW, "rb:green:usr"),
-};
-
-static struct ar8327_platform_data rb2011_ar8327_data = {
- .pad0_cfg = &rb2011_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &rb2011_ar8327_led_cfg,
- .num_leds = ARRAY_SIZE(rb2011_ar8327_leds),
- .leds = rb2011_ar8327_leds,
-};
-
-static struct mdio_board_info rb2011_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &rb2011_ar8327_data,
- },
-};
-
-static void __init rb2011_wlan_init(void)
-{
- char *art_buf;
- u8 wlan_mac[ETH_ALEN];
-
- art_buf = rb_get_wlan_data();
- if (art_buf == NULL)
- return;
-
- ath79_init_mac(wlan_mac, ath79_mac_base, 11);
- ath79_register_wmac(art_buf + 0x1000, wlan_mac);
-
- kfree(art_buf);
-}
-
-static void rb2011_nand_select_chip(int chip_no)
-{
- switch (chip_no) {
- case 0:
- gpio_set_value(RB2011_GPIO_NAND_NCE, 0);
- break;
- default:
- gpio_set_value(RB2011_GPIO_NAND_NCE, 1);
- break;
- }
- ndelay(500);
-}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
-static struct nand_ecclayout rb2011_nand_ecclayout = {
- .eccbytes = 6,
- .eccpos = { 8, 9, 10, 13, 14, 15 },
- .oobavail = 9,
- .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-#else
-
-static int rb2011_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 8;
- oobregion->length = 3;
- return 0;
- case 1:
- oobregion->offset = 13;
- oobregion->length = 3;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static int rb2011_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 0;
- oobregion->length = 4;
- return 0;
- case 1:
- oobregion->offset = 4;
- oobregion->length = 1;
- return 0;
- case 2:
- oobregion->offset = 6;
- oobregion->length = 2;
- return 0;
- case 3:
- oobregion->offset = 11;
- oobregion->length = 2;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static const struct mtd_ooblayout_ops rb2011_nand_ecclayout_ops = {
- .ecc = rb2011_ooblayout_ecc,
- .free = rb2011_ooblayout_free,
-};
-#endif /* < 4.6 */
-
-static int rb2011_nand_scan_fixup(struct mtd_info *mtd)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- struct nand_chip *chip = mtd->priv;
-#else
- struct nand_chip *chip = mtd_to_nand(mtd);
-#endif /* < 4.6.0 */
-
- if (mtd->writesize == 512) {
- /*
- * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
- * will not be able to find the kernel that we load.
- */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- chip->ecc.layout = &rb2011_nand_ecclayout;
-#else
- mtd_set_ooblayout(mtd, &rb2011_nand_ecclayout_ops);
-#endif
- }
-
- chip->options = NAND_NO_SUBPAGE_WRITE;
-
- return 0;
-}
-
-static void __init rb2011_nand_init(void)
-{
- gpio_request_one(RB2011_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
-
- ath79_nfc_set_scan_fixup(rb2011_nand_scan_fixup);
- ath79_nfc_set_parts(rb2011_nand_partitions,
- ARRAY_SIZE(rb2011_nand_partitions));
- ath79_nfc_set_select_chip(rb2011_nand_select_chip);
- ath79_nfc_set_swap_dma(true);
- ath79_register_nfc();
-}
-
-static int rb2011_get_port_link(unsigned port)
-{
- if (port != 6)
- return -EINVAL;
-
- /* The Loss of signal line is active low */
- return !gpio_get_value(RB2011_GPIO_SFP_LOS);
-}
-
-static void __init rb2011_sfp_init(void)
-{
- gpio_request_one(RB2011_GPIO_SFP_LOS, GPIOF_IN, "SFP LOS");
-
- rb2011_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
-
- rb2011_ar8327_data.pad6_cfg = &rb2011_ar8327_pad6_cfg;
-
- rb2011_ar8327_sgmii_cfg.sgmii_ctrl = 0xc70167d0;
- rb2011_ar8327_sgmii_cfg.serdes_aen = true;
-
- rb2011_ar8327_data.sgmii_cfg = &rb2011_ar8327_sgmii_cfg;
-
- rb2011_ar8327_data.port6_cfg.force_link = 1;
- rb2011_ar8327_data.port6_cfg.speed = AR8327_PORT_SPEED_1000;
- rb2011_ar8327_data.port6_cfg.duplex = 1;
-
- rb2011_ar8327_data.get_port_link = rb2011_get_port_link;
-}
-
-static int __init rb2011_setup(u32 flags)
-{
- const struct rb_info *info;
- char buf[64];
-
- info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
- if (!info)
- return -ENODEV;
-
- scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s",
- (info->board_name) ? info->board_name : "");
- mips_set_machine_name(buf);
-
- rb2011_init_partitions(info);
-
- ath79_register_m25p80(&rb2011_spi_flash_data);
- rb2011_nand_init();
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_RXD_DELAY |
- AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(1, 0x0);
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(rb2011_mdio0_info,
- ARRAY_SIZE(rb2011_mdio0_info));
-
- /* GMAC0 is connected to an ar8327 switch */
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x6f000000;
-
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the internal switch */
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 5);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(1);
-
- if (flags & RB2011_FLAG_SFP)
- rb2011_sfp_init();
-
- if (flags & RB2011_FLAG_WLAN)
- rb2011_wlan_init();
-
- if (flags & RB2011_FLAG_USB)
- ath79_register_usb();
-
- return 0;
-}
-
-static void __init rb2011l_setup(void)
-{
- rb2011_setup(0);
-}
-
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011L, "2011L", rb2011l_setup);
-
-static void __init rb2011us_setup(void)
-{
- rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB);
-}
-
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011US, "2011US", rb2011us_setup);
-
-static void __init rb2011r5_setup(void)
-{
- rb2011_setup(RB2011_FLAG_SFP | RB2011_FLAG_USB | RB2011_FLAG_WLAN);
-}
-
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011R5, "2011r5", rb2011r5_setup);
-
-static void __init rb2011g_setup(void)
-{
- rb2011_setup(RB2011_FLAG_SFP |
- RB2011_FLAG_USB |
- RB2011_FLAG_WLAN);
-}
-
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_2011G, "2011G", rb2011g_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb4xx.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb4xx.c
deleted file mode 100644
index edf90e1872..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb4xx.c
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- * MikroTik RouterBOARD 4xx series support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/platform_data/mdio-gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/mmc_spi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/rb4xx_cpld.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define RB4XX_GPIO_USER_LED 4
-#define RB4XX_GPIO_RESET_SWITCH 7
-
-#define RB4XX_GPIO_CPLD_BASE 32
-#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1)
-#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2)
-#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3)
-#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4)
-#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5)
-
-#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */
-#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL)
-
-static struct gpio_led rb4xx_leds_gpio[] __initdata = {
- {
- .name = "rb4xx:yellow:user",
- .gpio = RB4XX_GPIO_USER_LED,
- .active_low = 0,
- }, {
- .name = "rb4xx:green:led1",
- .gpio = RB4XX_GPIO_CPLD_LED1,
- .active_low = 1,
- }, {
- .name = "rb4xx:green:led2",
- .gpio = RB4XX_GPIO_CPLD_LED2,
- .active_low = 1,
- }, {
- .name = "rb4xx:green:led3",
- .gpio = RB4XX_GPIO_CPLD_LED3,
- .active_low = 1,
- }, {
- .name = "rb4xx:green:led4",
- .gpio = RB4XX_GPIO_CPLD_LED4,
- .active_low = 1,
- }, {
- .name = "rb4xx:green:led5",
- .gpio = RB4XX_GPIO_CPLD_LED5,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = {
- {
- .desc = "reset_switch",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RB4XX_GPIO_RESET_SWITCH,
- .active_low = 1,
- }
-};
-
-static struct platform_device rb4xx_nand_device = {
- .name = "rb4xx-nand",
- .id = -1,
-};
-
-static struct ath79_pci_irq rb4xx_pci_irqs[] = {
- {
- .slot = 17,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(2),
- }, {
- .slot = 18,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(0),
- }, {
- .slot = 18,
- .pin = 2,
- .irq = ATH79_PCI_IRQ(1),
- }, {
- .slot = 19,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(1),
- }, {
- .slot = 19,
- .pin = 2,
- .irq = ATH79_PCI_IRQ(2),
- }, {
- .slot = 20,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(2),
- }, {
- .slot = 20,
- .pin = 2,
- .irq = ATH79_PCI_IRQ(0),
- }, {
- .slot = 21,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(0),
- }, {
- .slot = 22,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(1),
- }, {
- .slot = 22,
- .pin = 2,
- .irq = ATH79_PCI_IRQ(2),
- }, {
- .slot = 23,
- .pin = 1,
- .irq = ATH79_PCI_IRQ(2),
- }, {
- .slot = 23,
- .pin = 2,
- .irq = ATH79_PCI_IRQ(0),
- }
-};
-
-static struct mtd_partition rb4xx_partitions[] = {
- {
- .name = "routerboot",
- .offset = 0,
- .size = 0x0b000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "hard_config",
- .offset = 0x0b000,
- .size = 0x01000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "bios",
- .offset = 0x0d000,
- .size = 0x02000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "soft_config",
- .offset = 0x0f000,
- .size = 0x01000,
- }
-};
-
-static struct flash_platform_data rb4xx_flash_data = {
- .type = "pm25lv512",
- .parts = rb4xx_partitions,
- .nr_parts = ARRAY_SIZE(rb4xx_partitions),
-};
-
-static struct rb4xx_cpld_platform_data rb4xx_cpld_data = {
- .gpio_base = RB4XX_GPIO_CPLD_BASE,
-};
-
-static struct mmc_spi_platform_data rb4xx_mmc_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-};
-
-static struct spi_board_info rb4xx_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &rb4xx_flash_data,
- }, {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 25000000,
- .modalias = "spi-rb4xx-cpld",
- .platform_data = &rb4xx_cpld_data,
- }
-};
-
-static struct spi_board_info rb4xx_microsd_info[] = {
- {
- .bus_num = 0,
- .chip_select = 2,
- .max_speed_hz = 25000000,
- .modalias = "mmc_spi",
- .platform_data = &rb4xx_mmc_data,
- }
-};
-
-
-static struct resource rb4xx_spi_resources[] = {
- {
- .start = AR71XX_SPI_BASE,
- .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device rb4xx_spi_device = {
- .name = "rb4xx-spi",
- .id = -1,
- .resource = rb4xx_spi_resources,
- .num_resources = ARRAY_SIZE(rb4xx_spi_resources),
-};
-
-static void __init rb4xx_generic_setup(void)
-{
- ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
- AR71XX_GPIO_FUNC_SPI_CS2_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
- rb4xx_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rb4xx_gpio_keys),
- rb4xx_gpio_keys);
-
- spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
- platform_device_register(&rb4xx_spi_device);
- platform_device_register(&rb4xx_nand_device);
-}
-
-static void __init rb411_setup(void)
-{
- rb4xx_generic_setup();
- spi_register_board_info(rb4xx_microsd_info,
- ARRAY_SIZE(rb4xx_microsd_info));
-
- ath79_register_mdio(0, 0xfffffffc);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = 0x00000003;
-
- ath79_register_eth(0);
-
- ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH",
- rb411_setup);
-
-static void __init rb411u_setup(void)
-{
- rb411_setup();
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U",
- rb411u_setup);
-
-#define RB433_LAN_PHYMASK BIT(0)
-#define RB433_WAN_PHYMASK BIT(4)
-#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK)
-
-static void __init rb433_setup(void)
-{
- rb4xx_generic_setup();
- spi_register_board_info(rb4xx_microsd_info,
- ARRAY_SIZE(rb4xx_microsd_info));
-
- ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
-
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH",
- rb433_setup);
-
-static void __init rb433u_setup(void)
-{
- rb433_setup();
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH",
- rb433u_setup);
-
-static void __init rb435g_setup(void)
-{
- rb4xx_generic_setup();
-
- spi_register_board_info(rb4xx_microsd_info,
- ARRAY_SIZE(rb4xx_microsd_info));
-
- ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
-
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
- ath79_register_pci();
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_435G, "435G", "MikroTik RouterBOARD 435G",
- rb435g_setup);
-
-#define RB450_LAN_PHYMASK BIT(0)
-#define RB450_WAN_PHYMASK BIT(4)
-#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK)
-
-static void __init rb450_generic_setup(int gige)
-{
- rb4xx_generic_setup();
- ath79_register_mdio(0, ~RB450_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
- ath79_eth0_data.phy_if_mode = (gige) ?
- PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = RB450_LAN_PHYMASK;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
- ath79_eth1_data.phy_if_mode = (gige) ?
- PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = RB450_WAN_PHYMASK;
-
- ath79_register_eth(1);
- ath79_register_eth(0);
-}
-
-static void __init rb450_setup(void)
-{
- rb450_generic_setup(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_450, "450", "MikroTik RouterBOARD 450",
- rb450_setup);
-
-static void __init rb450g_setup(void)
-{
- rb450_generic_setup(1);
- spi_register_board_info(rb4xx_microsd_info,
- ARRAY_SIZE(rb4xx_microsd_info));
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G",
- rb450g_setup);
-
-static void __init rb493_setup(void)
-{
- rb4xx_generic_setup();
-
- ath79_register_mdio(0, 0x3fffff00);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = 0x00000001;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
- rb493_setup);
-
-#define RB493G_GPIO_MDIO_MDC 7
-#define RB493G_GPIO_MDIO_DATA 8
-
-#define RB493G_MDIO_PHYMASK BIT(0)
-
-static struct mdio_gpio_platform_data rb493g_mdio_data = {
- .mdc = RB493G_GPIO_MDIO_MDC,
- .mdio = RB493G_GPIO_MDIO_DATA,
-
- .phy_mask = ~RB493G_MDIO_PHYMASK,
-};
-
-static struct platform_device rb493g_mdio_device = {
- .name = "mdio-gpio",
- .id = -1,
- .dev = {
- .platform_data = &rb493g_mdio_data,
- },
-};
-
-static void __init rb493g_setup(void)
-{
- ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
- AR71XX_GPIO_FUNC_SPI_CS2_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
- rb4xx_leds_gpio);
-
- spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
- spi_register_board_info(rb4xx_microsd_info,
- ARRAY_SIZE(rb4xx_microsd_info));
-
- platform_device_register(&rb4xx_spi_device);
- platform_device_register(&rb4xx_nand_device);
-
- ath79_register_mdio(0, ~RB493G_MDIO_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = RB493G_MDIO_PHYMASK;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev;
- ath79_eth1_data.phy_mask = RB493G_MDIO_PHYMASK;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- platform_device_register(&rb493g_mdio_device);
-
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_register_usb();
-
- ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G",
- rb493g_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c
deleted file mode 100644
index 0ec94a80e3..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb750.c
+++ /dev/null
@@ -1,349 +0,0 @@
-/*
- * MikroTik RouterBOARD 750/750GL support
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/ath9k_platform.h>
-#include <linux/platform_device.h>
-#include <linux/phy.h>
-#include <linux/ar8216_platform.h>
-#include <linux/rle.h>
-#include <linux/routerboot.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/irq.h>
-#include <asm/mach-ath79/mach-rb750.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-usb.h"
-#include "dev-eth.h"
-#include "machtypes.h"
-#include "routerboot.h"
-
-static struct rb750_led_data rb750_leds[] = {
- {
- .name = "rb750:green:act",
- .mask = RB750_LED_ACT,
- .active_low = 1,
- }, {
- .name = "rb750:green:port1",
- .mask = RB750_LED_PORT5,
- .active_low = 1,
- }, {
- .name = "rb750:green:port2",
- .mask = RB750_LED_PORT4,
- .active_low = 1,
- }, {
- .name = "rb750:green:port3",
- .mask = RB750_LED_PORT3,
- .active_low = 1,
- }, {
- .name = "rb750:green:port4",
- .mask = RB750_LED_PORT2,
- .active_low = 1,
- }, {
- .name = "rb750:green:port5",
- .mask = RB750_LED_PORT1,
- .active_low = 1,
- }
-};
-
-static struct rb750_led_data rb750gr3_leds[] = {
- {
- .name = "rb750:green:act",
- .mask = RB7XX_LED_ACT,
- .active_low = 1,
- },
-};
-
-static struct rb750_led_platform_data rb750_leds_data;
-static struct platform_device rb750_leds_device = {
- .name = "leds-rb750",
- .dev = {
- .platform_data = &rb750_leds_data,
- }
-};
-
-static struct rb7xx_nand_platform_data rb750_nand_data;
-static struct platform_device rb750_nand_device = {
- .name = "rb750-nand",
- .id = -1,
- .dev = {
- .platform_data = &rb750_nand_data,
- }
-};
-
-static void rb750_latch_change(u32 mask_clr, u32 mask_set)
-{
- static DEFINE_SPINLOCK(lock);
- static u32 latch_set = RB750_LED_BITS | RB750_LVC573_LE;
- static u32 latch_oe;
- static u32 latch_clr;
- unsigned long flags;
- u32 t;
-
- spin_lock_irqsave(&lock, flags);
-
- if ((mask_clr & BIT(31)) != 0 &&
- (latch_set & RB750_LVC573_LE) == 0) {
- goto unlock;
- }
-
- latch_set = (latch_set | mask_set) & ~mask_clr;
- latch_clr = (latch_clr | mask_clr) & ~mask_set;
-
- if (latch_oe == 0)
- latch_oe = __raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_OE);
-
- if (likely(latch_set & RB750_LVC573_LE)) {
- void __iomem *base = ath79_gpio_base;
-
- t = __raw_readl(base + AR71XX_GPIO_REG_OE);
- t |= mask_clr | latch_oe | mask_set;
-
- __raw_writel(t, base + AR71XX_GPIO_REG_OE);
- __raw_writel(latch_clr, base + AR71XX_GPIO_REG_CLEAR);
- __raw_writel(latch_set, base + AR71XX_GPIO_REG_SET);
- } else if (mask_clr & RB750_LVC573_LE) {
- void __iomem *base = ath79_gpio_base;
-
- latch_oe = __raw_readl(base + AR71XX_GPIO_REG_OE);
- __raw_writel(RB750_LVC573_LE, base + AR71XX_GPIO_REG_CLEAR);
- /* flush write */
- __raw_readl(base + AR71XX_GPIO_REG_CLEAR);
- }
-
-unlock:
- spin_unlock_irqrestore(&lock, flags);
-}
-
-static void rb750_nand_enable_pins(void)
-{
- rb750_latch_change(RB750_LVC573_LE, 0);
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
- AR724X_GPIO_FUNC_SPI_EN);
-}
-
-static void rb750_nand_disable_pins(void)
-{
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN,
- AR724X_GPIO_FUNC_JTAG_DISABLE);
- rb750_latch_change(0, RB750_LVC573_LE);
-}
-
-static void __init rb750_setup(void)
-{
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
-
- /* WAN port */
- ath79_register_eth(0);
-
- rb750_leds_data.num_leds = ARRAY_SIZE(rb750_leds);
- rb750_leds_data.leds = rb750_leds;
- rb750_leds_data.latch_change = rb750_latch_change;
- platform_device_register(&rb750_leds_device);
-
- rb750_nand_data.nce_line = RB750_NAND_NCE;
- rb750_nand_data.enable_pins = rb750_nand_enable_pins;
- rb750_nand_data.disable_pins = rb750_nand_disable_pins;
- rb750_nand_data.latch_change = rb750_latch_change;
- platform_device_register(&rb750_nand_device);
-
- /* USB */
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_750, "750i", "MikroTik RouterBOARD 750",
- rb750_setup);
-
-static struct ar8327_pad_cfg rb750gr3_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data rb750gr3_ar8327_data = {
- .pad0_cfg = &rb750gr3_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- }
-};
-
-static struct mdio_board_info rb750g3_mdio_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &rb750gr3_ar8327_data,
- },
-};
-
-static void rb750gr3_nand_enable_pins(void)
-{
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
- AR724X_GPIO_FUNC_SPI_EN |
- AR724X_GPIO_FUNC_SPI_CS_EN2);
-}
-
-static void rb750gr3_nand_disable_pins(void)
-{
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_SPI_EN |
- AR724X_GPIO_FUNC_SPI_CS_EN2,
- AR724X_GPIO_FUNC_JTAG_DISABLE);
-}
-
-static void rb750gr3_latch_change(u32 mask_clr, u32 mask_set)
-{
- static DEFINE_SPINLOCK(lock);
- static u32 latch_set = RB7XX_LED_ACT;
- static u32 latch_clr;
- void __iomem *base = ath79_gpio_base;
- unsigned long flags;
- u32 t;
-
- spin_lock_irqsave(&lock, flags);
-
- latch_set = (latch_set | mask_set) & ~mask_clr;
- latch_clr = (latch_clr | mask_clr) & ~mask_set;
-
- mask_set = latch_set & (RB7XX_USB_POWERON | RB7XX_MONITOR);
- mask_clr = latch_clr & (RB7XX_USB_POWERON | RB7XX_MONITOR);
-
- if ((latch_set ^ RB7XX_LED_ACT) & RB7XX_LED_ACT) {
- /* enable output mode */
- t = __raw_readl(base + AR71XX_GPIO_REG_OE);
- t |= RB7XX_LED_ACT;
- __raw_writel(t, base + AR71XX_GPIO_REG_OE);
-
- mask_clr |= RB7XX_LED_ACT;
- } else {
- /* disable output mode */
- t = __raw_readl(base + AR71XX_GPIO_REG_OE);
- t &= ~RB7XX_LED_ACT;
- __raw_writel(t, base + AR71XX_GPIO_REG_OE);
- }
-
- __raw_writel(mask_set, base + AR71XX_GPIO_REG_SET);
- __raw_writel(mask_clr, base + AR71XX_GPIO_REG_CLEAR);
-
- spin_unlock_irqrestore(&lock, flags);
-}
-
-static void __init rb750gr3_setup(void)
-{
- ath79_register_mdio(0, 0x0);
- mdiobus_register_board_info(rb750g3_mdio_info,
- ARRAY_SIZE(rb750g3_mdio_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_pll_data.pll_1000 = 0x62000000;
-
- ath79_register_eth(0);
-
- rb750_leds_data.num_leds = ARRAY_SIZE(rb750gr3_leds);
- rb750_leds_data.leds = rb750gr3_leds;
- rb750_leds_data.latch_change = rb750gr3_latch_change;
- platform_device_register(&rb750_leds_device);
-
- rb750_nand_data.nce_line = RB7XX_NAND_NCE;
- rb750_nand_data.enable_pins = rb750gr3_nand_enable_pins;
- rb750_nand_data.disable_pins = rb750gr3_nand_disable_pins;
- rb750_nand_data.latch_change = rb750gr3_latch_change;
- platform_device_register(&rb750_nand_device);
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_750G_R3, "750Gr3", "MikroTik RouterBOARD 750GL",
- rb750gr3_setup);
-
-#define RB751_HARDCONFIG 0x1f00b000
-#define RB751_HARDCONFIG_SIZE 0x1000
-
-static void __init rb751_wlan_setup(void)
-{
- u8 *hardconfig = (u8 *) KSEG1ADDR(RB751_HARDCONFIG);
- struct ath9k_platform_data *wmac_data;
- u16 tag_len;
- u8 *tag;
- u16 mac_len;
- u8 *mac;
- int err;
-
- wmac_data = ap9x_pci_get_wmac_data(0);
- if (!wmac_data) {
- pr_err("rb75x: unable to get address of wlan data\n");
- return;
- }
-
- ap9x_pci_setup_wmac_led_pin(0, 9);
-
- err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
- RB_ID_WLAN_DATA, &tag, &tag_len);
- if (err) {
- pr_err("rb75x: no calibration data found\n");
- return;
- }
-
- err = rle_decode(tag, tag_len, (unsigned char *) wmac_data->eeprom_data,
- sizeof(wmac_data->eeprom_data), NULL, NULL);
- if (err) {
- pr_err("rb75x: unable to decode wlan eeprom data\n");
- return;
- }
-
- err = routerboot_find_tag(hardconfig, RB751_HARDCONFIG_SIZE,
- RB_ID_MAC_ADDRESS_PACK, &mac, &mac_len);
- if (err) {
- pr_err("rb75x: no mac address found\n");
- return;
- }
-
- ap91_pci_init(NULL, mac);
-}
-
-static void __init rb751_setup(void)
-{
- rb750_setup();
- ath79_register_usb();
- rb751_wlan_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_751, "751", "MikroTik RouterBOARD 751",
- rb751_setup);
-
-static void __init rb751g_setup(void)
-{
- rb750gr3_setup();
- ath79_register_usb();
- rb751_wlan_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_751G, "751g", "MikroTik RouterBOARD 751G",
- rb751g_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
deleted file mode 100644
index 9620718962..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb91x.c
+++ /dev/null
@@ -1,348 +0,0 @@
-/*
- * MikroTik RouterBOARD 91X support
- *
- * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt) "rb91x: " fmt
-
-#include <linux/version.h>
-#include <linux/phy.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/mtd/mtd.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/74x164.h>
-#include <linux/spi/flash.h>
-#include <linux/routerboot.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/gpio-latch.h>
-#include <linux/platform_data/rb91x_nand.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/prom.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ath79_spi_platform.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "routerboot.h"
-
-#define RB_ROUTERBOOT_OFFSET 0x0000
-#define RB_ROUTERBOOT_MIN_SIZE 0xb000
-#define RB_HARD_CFG_SIZE 0x1000
-#define RB_BIOS_OFFSET 0xd000
-#define RB_BIOS_SIZE 0x1000
-#define RB_SOFT_CFG_OFFSET 0xf000
-#define RB_SOFT_CFG_SIZE 0x1000
-
-#define RB91X_FLAG_USB BIT(0)
-#define RB91X_FLAG_PCIE BIT(1)
-
-#define RB91X_LATCH_GPIO_BASE 32
-#define RB91X_LATCH_GPIO(_x) (RB91X_LATCH_GPIO_BASE + (_x))
-
-#define RB91X_SSR_GPIO_BASE (RB91X_LATCH_GPIO_BASE + AR934X_GPIO_COUNT)
-#define RB91X_SSR_GPIO(_x) (RB91X_SSR_GPIO_BASE + (_x))
-
-#define RB91X_SSR_BIT_LED1 0
-#define RB91X_SSR_BIT_LED2 1
-#define RB91X_SSR_BIT_LED3 2
-#define RB91X_SSR_BIT_LED4 3
-#define RB91X_SSR_BIT_LED5 4
-#define RB91X_SSR_BIT_5 5
-#define RB91X_SSR_BIT_USB_POWER 6
-#define RB91X_SSR_BIT_PCIE_POWER 7
-
-#define RB91X_GPIO_SSR_STROBE RB91X_LATCH_GPIO(0)
-#define RB91X_GPIO_LED_POWER RB91X_LATCH_GPIO(1)
-#define RB91X_GPIO_LED_USER RB91X_LATCH_GPIO(2)
-#define RB91X_GPIO_NAND_READ RB91X_LATCH_GPIO(3)
-#define RB91X_GPIO_NAND_RDY RB91X_LATCH_GPIO(4)
-#define RB91X_GPIO_NLE RB91X_LATCH_GPIO(11)
-#define RB91X_GPIO_NAND_NRW RB91X_LATCH_GPIO(12)
-#define RB91X_GPIO_NAND_NCE RB91X_LATCH_GPIO(13)
-#define RB91X_GPIO_NAND_CLE RB91X_LATCH_GPIO(14)
-#define RB91X_GPIO_NAND_ALE RB91X_LATCH_GPIO(15)
-
-#define RB91X_GPIO_LED_1 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED1)
-#define RB91X_GPIO_LED_2 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED2)
-#define RB91X_GPIO_LED_3 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED3)
-#define RB91X_GPIO_LED_4 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED4)
-#define RB91X_GPIO_LED_5 RB91X_SSR_GPIO(RB91X_SSR_BIT_LED5)
-#define RB91X_GPIO_USB_POWER RB91X_SSR_GPIO(RB91X_SSR_BIT_USB_POWER)
-#define RB91X_GPIO_PCIE_POWER RB91X_SSR_GPIO(RB91X_SSR_BIT_PCIE_POWER)
-
-struct rb_board_info {
- const char *name;
- u32 flags;
-};
-
-static struct mtd_partition rb711gr100_spi_partitions[] = {
- {
- .name = "routerboot",
- .offset = RB_ROUTERBOOT_OFFSET,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "hard_config",
- .size = RB_HARD_CFG_SIZE,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "bios",
- .offset = RB_BIOS_OFFSET,
- .size = RB_BIOS_SIZE,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "soft_config",
- .size = RB_SOFT_CFG_SIZE,
- }
-};
-
-static struct flash_platform_data rb711gr100_spi_flash_data = {
- .parts = rb711gr100_spi_partitions,
- .nr_parts = ARRAY_SIZE(rb711gr100_spi_partitions),
-};
-
-static int rb711gr100_gpio_latch_gpios[AR934X_GPIO_COUNT] __initdata = {
- 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,
- 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22
-};
-
-static struct gpio_latch_platform_data rb711gr100_gpio_latch_data __initdata = {
- .base = RB91X_LATCH_GPIO_BASE,
- .num_gpios = ARRAY_SIZE(rb711gr100_gpio_latch_gpios),
- .gpios = rb711gr100_gpio_latch_gpios,
- .le_gpio_index = 11,
- .le_active_low = true,
-};
-
-static struct rb91x_nand_platform_data rb711gr100_nand_data __initdata = {
- .gpio_nce = RB91X_GPIO_NAND_NCE,
- .gpio_ale = RB91X_GPIO_NAND_ALE,
- .gpio_cle = RB91X_GPIO_NAND_CLE,
- .gpio_rdy = RB91X_GPIO_NAND_RDY,
- .gpio_read = RB91X_GPIO_NAND_READ,
- .gpio_nrw = RB91X_GPIO_NAND_NRW,
- .gpio_nle = RB91X_GPIO_NLE,
-};
-
-static u8 rb711gr100_ssr_initdata[] = {
- BIT(RB91X_SSR_BIT_PCIE_POWER) |
- BIT(RB91X_SSR_BIT_USB_POWER) |
- BIT(RB91X_SSR_BIT_5)
-};
-
-static struct gen_74x164_chip_platform_data rb711gr100_ssr_data = {
- .base = RB91X_SSR_GPIO_BASE,
- .num_registers = ARRAY_SIZE(rb711gr100_ssr_initdata),
- .init_data = rb711gr100_ssr_initdata,
-};
-
-static struct spi_board_info rb711gr100_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &rb711gr100_spi_flash_data,
- }, {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 10000000,
- .modalias = "74x164",
- .platform_data = &rb711gr100_ssr_data,
- }
-};
-
-static int rb711gr100_spi_cs_gpios[2] = {
- -ENOENT,
- RB91X_GPIO_SSR_STROBE,
-};
-
-static struct ath79_spi_platform_data rb711gr100_spi_data __initdata = {
- .bus_num = 0,
- .num_chipselect = 2,
- .cs_gpios = rb711gr100_spi_cs_gpios,
-};
-
-static struct gpio_led rb711gr100_leds[] __initdata = {
- {
- .name = "rb:green:led1",
- .gpio = RB91X_GPIO_LED_1,
- .active_low = 0,
- },
- {
- .name = "rb:green:led2",
- .gpio = RB91X_GPIO_LED_2,
- .active_low = 0,
- },
- {
- .name = "rb:green:led3",
- .gpio = RB91X_GPIO_LED_3,
- .active_low = 0,
- },
- {
- .name = "rb:green:led4",
- .gpio = RB91X_GPIO_LED_4,
- .active_low = 0,
- },
- {
- .name = "rb:green:led5",
- .gpio = RB91X_GPIO_LED_5,
- .active_low = 0,
- },
- {
- .name = "rb:green:user",
- .gpio = RB91X_GPIO_LED_USER,
- .active_low = 0,
- },
- {
- .name = "rb:green:power",
- .gpio = RB91X_GPIO_LED_POWER,
- .active_low = 0,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
-};
-
-static struct at803x_platform_data rb91x_at803x_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 1,
- .enable_rgmii_tx_delay = 1,
-};
-
-static struct mdio_board_info rb91x_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &rb91x_at803x_data,
- },
-};
-
-static void __init rb711gr100_init_partitions(const struct rb_info *info)
-{
- rb711gr100_spi_partitions[0].size = info->hard_cfg_offs;
- rb711gr100_spi_partitions[1].offset = info->hard_cfg_offs;
-
- rb711gr100_spi_partitions[3].offset = info->soft_cfg_offs;
-}
-
-void __init rb711gr100_wlan_init(void)
-{
- char *caldata;
- u8 wlan_mac[ETH_ALEN];
-
- caldata = rb_get_wlan_data();
- if (caldata == NULL)
- return;
-
- ath79_init_mac(wlan_mac, ath79_mac_base, 1);
- ath79_register_wmac(caldata + 0x1000, wlan_mac);
-
- kfree(caldata);
-}
-
-#define RB_BOARD_INFO(_name, _flags) \
- { \
- .name = (_name), \
- .flags = (_flags), \
- }
-
-static const struct rb_board_info rb711gr100_boards[] __initconst = {
- RB_BOARD_INFO("911G-2HPnD", 0),
- RB_BOARD_INFO("911G-5HPnD", 0),
- RB_BOARD_INFO("912UAG-2HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE),
- RB_BOARD_INFO("912UAG-5HPnD", RB91X_FLAG_USB | RB91X_FLAG_PCIE),
-};
-
-static u32 rb711gr100_get_flags(const struct rb_info *info)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(rb711gr100_boards); i++) {
- const struct rb_board_info *bi;
-
- bi = &rb711gr100_boards[i];
- if (strcmp(info->board_name, bi->name) == 0)
- return bi->flags;
- }
-
- return 0;
-}
-
-static void __init rb711gr100_setup(void)
-{
- const struct rb_info *info;
- char buf[64];
- u32 flags;
-
- info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
- if (!info)
- return;
-
- scnprintf(buf, sizeof(buf), "Mikrotik RouterBOARD %s",
- (info->board_name) ? info->board_name : "");
- mips_set_machine_name(buf);
-
- rb711gr100_init_partitions(info);
- ath79_register_spi(&rb711gr100_spi_data, rb711gr100_spi_info,
- ARRAY_SIZE(rb711gr100_spi_info));
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_RXD_DELAY |
- AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(rb91x_mdio0_info,
- ARRAY_SIZE(rb91x_mdio0_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_pll_data.pll_1000 = 0x02000000;
-
- ath79_register_eth(0);
-
- rb711gr100_wlan_init();
-
- platform_device_register_data(NULL, "rb91x-nand", -1,
- &rb711gr100_nand_data,
- sizeof(rb711gr100_nand_data));
-
- platform_device_register_data(NULL, "gpio-latch", -1,
- &rb711gr100_gpio_latch_data,
- sizeof(rb711gr100_gpio_latch_data));
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rb711gr100_leds),
- rb711gr100_leds);
-
- flags = rb711gr100_get_flags(info);
-
- if (flags & RB91X_FLAG_USB)
- ath79_register_usb();
-
- if (flags & RB91X_FLAG_PCIE)
- ath79_register_pci();
-
-}
-
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_711GR100, "711Gr100", rb711gr100_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c
deleted file mode 100644
index 1c1cae1e76..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb922.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/*
- * MikroTik RouterBOARD 92X support
- *
- * Copyright (C) 2015 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/version.h>
-#include <linux/phy.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/mtd/mtd.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/routerboot.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/phy-at803x.h>
-#include <linux/version.h>
-
-#include <asm/prom.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-spi.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "routerboot.h"
-
-#define RB922_GPIO_LED_USR 12
-#define RB922_GPIO_USB_POWER 13
-#define RB922_GPIO_FAN_CTRL 14
-#define RB922_GPIO_BTN_RESET 20
-#define RB922_GPIO_NAND_NCE 23
-
-#define RB92X_FLAG_USB BIT(0)
-#define RB92X_FLAG_USB_POWER BIT(1)
-#define RB92X_FLAG_PCIE BIT(2)
-
-#define RB922_PHY_ADDR 4
-
-#define RB922_KEYS_POLL_INTERVAL 20 /* msecs */
-#define RB922_KEYS_DEBOUNCE_INTERVAL (3 * RB922_KEYS_POLL_INTERVAL)
-
-#define RB_ROUTERBOOT_OFFSET 0x0000
-#define RB_ROUTERBOOT_MIN_SIZE 0xb000
-#define RB_HARD_CFG_SIZE 0x1000
-#define RB_BIOS_OFFSET 0xd000
-#define RB_BIOS_SIZE 0x1000
-#define RB_SOFT_CFG_OFFSET 0xf000
-#define RB_SOFT_CFG_SIZE 0x1000
-
-struct rb_board_info {
- const char *name;
- u32 flags;
-};
-
-static struct mtd_partition rb922gs_spi_partitions[] = {
- {
- .name = "routerboot",
- .offset = RB_ROUTERBOOT_OFFSET,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "hard_config",
- .size = RB_HARD_CFG_SIZE,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "bios",
- .offset = RB_BIOS_OFFSET,
- .size = RB_BIOS_SIZE,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "soft_config",
- .size = RB_SOFT_CFG_SIZE,
- }
-};
-
-static void __init rb922gs_init_partitions(const struct rb_info *info)
-{
- rb922gs_spi_partitions[0].size = info->hard_cfg_offs;
- rb922gs_spi_partitions[1].offset = info->hard_cfg_offs;
- rb922gs_spi_partitions[3].offset = info->soft_cfg_offs;
-}
-
-static struct mtd_partition rb922gs_nand_partitions[] = {
- {
- .name = "booter",
- .offset = 0,
- .size = (256 * 1024),
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .offset = (256 * 1024),
- .size = (4 * 1024 * 1024) - (256 * 1024),
- },
- {
- .name = "ubi",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct flash_platform_data rb922gs_spi_flash_data = {
- .parts = rb922gs_spi_partitions,
- .nr_parts = ARRAY_SIZE(rb922gs_spi_partitions),
-};
-
-static struct gpio_led rb922gs_leds[] __initdata = {
- {
- .name = "rb:green:user",
- .gpio = RB922_GPIO_LED_USR,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button rb922gs_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RB922_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RB922_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct at803x_platform_data rb922gs_at803x_data = {
- .disable_smarteee = 1,
-};
-
-static struct mdio_board_info rb922gs_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = RB922_PHY_ADDR,
- .platform_data = &rb922gs_at803x_data,
- },
-};
-
-
-
-static void rb922gs_nand_select_chip(int chip_no)
-{
- switch (chip_no) {
- case 0:
- gpio_set_value(RB922_GPIO_NAND_NCE, 0);
- break;
- default:
- gpio_set_value(RB922_GPIO_NAND_NCE, 1);
- break;
- }
- ndelay(500);
-}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
-static struct nand_ecclayout rb922gs_nand_ecclayout = {
- .eccbytes = 6,
- .eccpos = { 8, 9, 10, 13, 14, 15 },
- .oobavail = 9,
- .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-#else
-
-static int rb922gs_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 8;
- oobregion->length = 3;
- return 0;
- case 1:
- oobregion->offset = 13;
- oobregion->length = 3;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static int rb922gs_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 0;
- oobregion->length = 4;
- return 0;
- case 1:
- oobregion->offset = 4;
- oobregion->length = 1;
- return 0;
- case 2:
- oobregion->offset = 6;
- oobregion->length = 2;
- return 0;
- case 3:
- oobregion->offset = 11;
- oobregion->length = 2;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static const struct mtd_ooblayout_ops rb922gs_nand_ecclayout_ops = {
- .ecc = rb922gs_ooblayout_ecc,
- .free = rb922gs_ooblayout_free,
-};
-#endif /* < 4.6 */
-
-static int rb922gs_nand_scan_fixup(struct mtd_info *mtd)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- struct nand_chip *chip = mtd->priv;
-#else
- struct nand_chip *chip = mtd_to_nand(mtd);
-#endif /* < 4.6.0 */
-
- if (mtd->writesize == 512) {
- /*
- * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
- * will not be able to find the kernel that we load.
- */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- chip->ecc.layout = &rb922gs_nand_ecclayout;
-#else
- mtd_set_ooblayout(mtd, &rb922gs_nand_ecclayout_ops);
-#endif
- }
-
- chip->options = NAND_NO_SUBPAGE_WRITE;
-
- return 0;
-}
-
-static void __init rb922gs_nand_init(void)
-{
- gpio_request_one(RB922_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
-
- ath79_nfc_set_scan_fixup(rb922gs_nand_scan_fixup);
- ath79_nfc_set_parts(rb922gs_nand_partitions,
- ARRAY_SIZE(rb922gs_nand_partitions));
- ath79_nfc_set_select_chip(rb922gs_nand_select_chip);
- ath79_nfc_set_swap_dma(true);
- ath79_register_nfc();
-}
-
-#define RB_BOARD_INFO(_name, _flags) \
- { \
- .name = (_name), \
- .flags = (_flags), \
- }
-
-static const struct rb_board_info rb92x_boards[] __initconst = {
- RB_BOARD_INFO("921GS-5HPacD r2", RB92X_FLAG_PCIE),
- RB_BOARD_INFO("922UAGS-5HPacD", RB92X_FLAG_USB | RB92X_FLAG_USB_POWER | RB92X_FLAG_PCIE),
-};
-
-static u32 rb92x_get_flags(const struct rb_info *info)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(rb92x_boards); i++) {
- const struct rb_board_info *bi;
-
- bi = &rb92x_boards[i];
- if (strcmp(info->board_name, bi->name) == 0)
- return bi->flags;
- }
-
- return 0;
-}
-
-static void __init rb922gs_setup(void)
-{
- const struct rb_info *info;
- char buf[64];
- u32 flags;
-
- info = rb_init_info((void *) KSEG1ADDR(0x1f000000), 0x10000);
- if (!info)
- return;
-
- scnprintf(buf, sizeof(buf), "MikroTik RouterBOARD %s",
- (info->board_name) ? info->board_name : "");
- mips_set_machine_name(buf);
-
- rb922gs_init_partitions(info);
- ath79_register_m25p80(&rb922gs_spi_flash_data);
-
- rb922gs_nand_init();
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(rb922gs_mdio0_info,
- ARRAY_SIZE(rb922gs_mdio0_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(RB922_PHY_ADDR);
- if (strcmp(info->board_name, "921GS-5HPacD r2") == 0 ||
- strcmp(info->board_name, "922UAGS-5HPacD") == 0)
- {
- ath79_eth0_pll_data.pll_10 = 0xa0001313;
- ath79_eth0_pll_data.pll_100 = 0xa0000101;
- ath79_eth0_pll_data.pll_1000 = 0x8f000000;
- }
- else {
- ath79_eth0_pll_data.pll_10 = 0x81001313;
- ath79_eth0_pll_data.pll_100 = 0x81000101;
- ath79_eth0_pll_data.pll_1000 = 0x8f000000;
- }
-
- ath79_register_eth(0);
-
- flags = rb92x_get_flags(info);
-
- if (flags & RB92X_FLAG_USB)
- ath79_register_usb();
-
- if (flags & RB92X_FLAG_USB_POWER)
- gpio_request_one(RB922_GPIO_USB_POWER, GPIOF_OUT_INIT_LOW |
- GPIOF_EXPORT_DIR_FIXED, "USB power");
-
- if (flags & RB92X_FLAG_PCIE)
- ath79_register_pci();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rb922gs_leds), rb922gs_leds);
- ath79_register_gpio_keys_polled(-1, RB922_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rb922gs_gpio_keys),
- rb922gs_gpio_keys);
-
- /* NOTE:
- * This only supports the RB911G-5HPacD board for now. For other boards
- * more devices must be registered based on the hardware options which
- * can be found in the hardware configuration of RouterBOOT.
- */
-}
-
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_922GS, "922gs", rb922gs_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c
deleted file mode 100644
index c4cf5f12a8..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rb95x.c
+++ /dev/null
@@ -1,327 +0,0 @@
-/*
- * MikroTik RouterBOARD 95X support
- *
- * Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be>
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2013 Kamil Trzcinski <ayufan@ayufan.eu>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt) "rb95x: " fmt
-
-#include <linux/version.h>
-#include <linux/phy.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <linux/mtd/mtd.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/routerboot.h>
-#include <linux/gpio.h>
-#include <linux/version.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "routerboot.h"
-#include "dev-leds-gpio.h"
-
-#define RB95X_GPIO_NAND_NCE 14
-
-static struct mtd_partition rb95x_nand_partitions[] = {
- {
- .name = "booter",
- .offset = 0,
- .size = (256 * 1024),
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .offset = (256 * 1024),
- .size = (4 * 1024 * 1024) - (256 * 1024),
- },
- {
- .name = "ubi",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct gpio_led rb951ui_leds_gpio[] __initdata = {
- {
- .name = "rb:green:wlan",
- .gpio = 11,
- .active_low = 1,
- }, {
- .name = "rb:green:act",
- .gpio = 3,
- .active_low = 1,
- }, {
- .name = "rb:green:port1",
- .gpio = 13,
- .active_low = 1,
- }, {
- .name = "rb:green:port2",
- .gpio = 12,
- .active_low = 1,
- }, {
- .name = "rb:green:port3",
- .gpio = 4,
- .active_low = 1,
- }, {
- .name = "rb:green:port4",
- .gpio = 21,
- .active_low = 1,
- }, {
- .name = "rb:green:port5",
- .gpio = 16,
- .active_low = 1,
- }
-};
-
-static struct ar8327_pad_cfg rb95x_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data rb95x_ar8327_data = {
- .pad0_cfg = &rb95x_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- }
-};
-
-static struct mdio_board_info rb95x_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &rb95x_ar8327_data,
- },
-};
-
-void __init rb95x_wlan_init(void)
-{
- char *art_buf;
- u8 wlan_mac[ETH_ALEN];
-
- art_buf = rb_get_wlan_data();
- if (art_buf == NULL)
- return;
-
- ath79_init_mac(wlan_mac, ath79_mac_base, 11);
- ath79_register_wmac(art_buf + 0x1000, wlan_mac);
-
- kfree(art_buf);
-}
-
-static void rb95x_nand_select_chip(int chip_no)
-{
- switch (chip_no) {
- case 0:
- gpio_set_value(RB95X_GPIO_NAND_NCE, 0);
- break;
- default:
- gpio_set_value(RB95X_GPIO_NAND_NCE, 1);
- break;
- }
- ndelay(500);
-}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
-static struct nand_ecclayout rb95x_nand_ecclayout = {
- .eccbytes = 6,
- .eccpos = { 8, 9, 10, 13, 14, 15 },
- .oobavail = 9,
- .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-#else
-
-static int rb95x_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 8;
- oobregion->length = 3;
- return 0;
- case 1:
- oobregion->offset = 13;
- oobregion->length = 3;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static int rb95x_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 0;
- oobregion->length = 4;
- return 0;
- case 1:
- oobregion->offset = 4;
- oobregion->length = 1;
- return 0;
- case 2:
- oobregion->offset = 6;
- oobregion->length = 2;
- return 0;
- case 3:
- oobregion->offset = 11;
- oobregion->length = 2;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static const struct mtd_ooblayout_ops rb95x_nand_ecclayout_ops = {
- .ecc = rb95x_ooblayout_ecc,
- .free = rb95x_ooblayout_free,
-};
-#endif /* < 4.6 */
-
-static int rb95x_nand_scan_fixup(struct mtd_info *mtd)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- struct nand_chip *chip = mtd->priv;
-#else
- struct nand_chip *chip = mtd_to_nand(mtd);
-#endif /* < 4.6.0 */
-
- if (mtd->writesize == 512) {
- /*
- * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
- * will not be able to find the kernel that we load.
- */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- chip->ecc.layout = &rb95x_nand_ecclayout;
-#else
- mtd_set_ooblayout(mtd, &rb95x_nand_ecclayout_ops);
-#endif
- }
-
- chip->options = NAND_NO_SUBPAGE_WRITE;
-
- return 0;
-}
-
-void __init rb95x_nand_init(void)
-{
- gpio_request_one(RB95X_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
-
- ath79_nfc_set_scan_fixup(rb95x_nand_scan_fixup);
- ath79_nfc_set_parts(rb95x_nand_partitions,
- ARRAY_SIZE(rb95x_nand_partitions));
- ath79_nfc_set_select_chip(rb95x_nand_select_chip);
- ath79_nfc_set_swap_dma(true);
- ath79_register_nfc();
-}
-
-static int __init rb95x_setup(void)
-{
- const struct rb_info *info;
-
- info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x10000);
- if (!info)
- return -EINVAL;
-
- rb95x_nand_init();
-
- return 0;
-}
-
-static void __init rb951g_setup(void)
-{
- if (rb95x_setup())
- return;
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_RXD_DELAY |
- AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(rb95x_mdio0_info,
- ARRAY_SIZE(rb95x_mdio0_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_pll_data.pll_1000 = 0x6f000000;
-
- ath79_register_eth(0);
-
- rb95x_wlan_init();
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_951G, "951G", "MikroTik RouterBOARD 951G-2HnD",
- rb951g_setup);
-
-static void __init rb951ui_setup(void)
-{
- if (rb95x_setup())
- return;
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-
- gpio_request_one(20, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-
- gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "POE power");
-
- rb95x_wlan_init();
- ath79_register_usb();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rb951ui_leds_gpio),
- rb951ui_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_RB_951U, "951HnD", "MikroTik RouterBOARD 951Ui-2HnD",
- rb951ui_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
deleted file mode 100644
index cb05c9142c..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c
+++ /dev/null
@@ -1,1262 +0,0 @@
-/*
- * MikroTik SPI-NOR RouterBOARDs support
- *
- * - MikroTik RouterBOARD mAP 2nD
- * - MikroTik RouterBOARD mAP L-2nD
- * - MikroTik RouterBOARD 911-2Hn (911 Lite2)
- * - MikroTik RouterBOARD 911-5Hn (911 Lite5)
- * - MikroTik RouterBOARD 931-2nD (hAP mini)
- * - MikroTik RouterBOARD 941L-2nD
- * - MikroTik RouterBOARD 951Ui-2nD
- * - MikroTik RouterBOARD 952Ui-5ac2nD
- * - MikroTik RouterBOARD 962UiGS-5HacT2HnT
- * - MikroTik RouterBOARD 750UP r2
- * - MikroTik RouterBOARD 750P-PBr2
- * - MikroTik RouterBOARD 750 r2
- * - MikroTik RouterBOARD LHG 5nD
- * - MikroTik RouterBOARD wAP2nD
- * - MikroTik RouterBOARD wAP G-5HacT2HnDwAP (wAP AC)
- * - MikroTik RouterBOARD wAP R-2nD
- *
- * Preliminary support for the following hardware
- * - MikroTik RouterBOARD cAP2nD
- * Furthermore, the cAP lite (cAPL2nD) appears to feature the exact same
- * hardware as the mAP L-2nD. It is unknown if they share the same board
- * identifier.
- *
- * Copyright (C) 2017-2018 Thibaut VARENE <varenet@parisc-linux.org>
- * Copyright (C) 2016 David Hutchison <dhutchison@bluemesh.net>
- * Copyright (C) 2017 Ryan Mounce <ryan@mounce.com.au>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/phy.h>
-#include <linux/routerboot.h>
-#include <linux/gpio.h>
-
-#include <linux/spi/spi.h>
-#include <linux/spi/74x164.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/ar8216_platform.h>
-#include <linux/platform_data/phy-at803x.h>
-#include <linux/platform_data/mdio-gpio.h>
-
-#include <asm/prom.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-spi.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "routerboot.h"
-
-#define RBSPI_KEYS_POLL_INTERVAL 20 /* msecs */
-#define RBSPI_KEYS_DEBOUNCE_INTERVAL (3 * RBSPI_KEYS_POLL_INTERVAL)
-
-#define RBSPI_HAS_USB BIT(0)
-#define RBSPI_HAS_WLAN0 BIT(1)
-#define RBSPI_HAS_WLAN1 BIT(2)
-#define RBSPI_HAS_WAN4 BIT(3) /* has WAN port on PHY4 */
-#define RBSPI_HAS_SSR BIT(4) /* has an SSR on SPI bus 0 */
-#define RBSPI_HAS_POE BIT(5)
-#define RBSPI_HAS_MDIO1 BIT(6)
-#define RBSPI_HAS_PCI BIT(7)
-
-#define RB_ROUTERBOOT_OFFSET 0x0000
-#define RB_BIOS_SIZE 0x1000
-#define RB_SOFT_CFG_SIZE 0x1000
-
-/* Flash partitions indexes */
-enum {
- RBSPI_PART_RBOOT,
- RBSPI_PART_HCONF,
- RBSPI_PART_BIOS,
- RBSPI_PART_RBOOT2,
- RBSPI_PART_SCONF,
- RBSPI_PART_FIRMW,
- RBSPI_PARTS
-};
-
-static struct mtd_partition rbspi_spi_partitions[RBSPI_PARTS];
-
-/*
- * Setup the SPI flash partition table based on initial parsing.
- * The kernel can be at any aligned position and have any size.
- */
-static void __init rbspi_init_partitions(const struct rb_info *info)
-{
- struct mtd_partition *parts = rbspi_spi_partitions;
- memset(parts, 0x0, sizeof(*parts));
-
- parts[RBSPI_PART_RBOOT].name = "routerboot";
- parts[RBSPI_PART_RBOOT].offset = RB_ROUTERBOOT_OFFSET;
- parts[RBSPI_PART_RBOOT].size = info->hard_cfg_offs;
- parts[RBSPI_PART_RBOOT].mask_flags = MTD_WRITEABLE;
-
- parts[RBSPI_PART_HCONF].name = "hard_config";
- parts[RBSPI_PART_HCONF].offset = info->hard_cfg_offs;
- parts[RBSPI_PART_HCONF].size = info->hard_cfg_size;
- parts[RBSPI_PART_HCONF].mask_flags = MTD_WRITEABLE;
-
- parts[RBSPI_PART_BIOS].name = "bios";
- parts[RBSPI_PART_BIOS].offset = info->hard_cfg_offs
- + info->hard_cfg_size;
- parts[RBSPI_PART_BIOS].size = RB_BIOS_SIZE;
- parts[RBSPI_PART_BIOS].mask_flags = MTD_WRITEABLE;
-
- parts[RBSPI_PART_RBOOT2].name = "routerboot2";
- parts[RBSPI_PART_RBOOT2].offset = parts[RBSPI_PART_BIOS].offset
- + RB_BIOS_SIZE;
- parts[RBSPI_PART_RBOOT2].size = info->soft_cfg_offs
- - parts[RBSPI_PART_RBOOT2].offset;
- parts[RBSPI_PART_RBOOT2].mask_flags = MTD_WRITEABLE;
-
- parts[RBSPI_PART_SCONF].name = "soft_config";
- parts[RBSPI_PART_SCONF].offset = info->soft_cfg_offs;
- parts[RBSPI_PART_SCONF].size = RB_SOFT_CFG_SIZE;
-
- parts[RBSPI_PART_FIRMW].name = "firmware";
- parts[RBSPI_PART_FIRMW].offset = parts[RBSPI_PART_SCONF].offset
- + parts[RBSPI_PART_SCONF].size;
- parts[RBSPI_PART_FIRMW].size = MTDPART_SIZ_FULL;
-}
-
-static struct flash_platform_data rbspi_spi_flash_data = {
- .parts = rbspi_spi_partitions,
- .nr_parts = ARRAY_SIZE(rbspi_spi_partitions),
-};
-
-/*
- * Several boards only have a single reset button, use a common
- * structure for that.
- */
-static struct gpio_keys_button rbspi_gpio_keys_reset[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL,
- .gpio = -ENOENT, /* filled dynamically */
- .active_low = 1,
- },
-};
-
-/* RB mAP L-2nD gpios */
-#define RBMAPL_GPIO_LED_POWER 17
-#define RBMAPL_GPIO_LED_USER 14
-#define RBMAPL_GPIO_LED_ETH 4
-#define RBMAPL_GPIO_LED_WLAN 11
-#define RBMAPL_GPIO_BTN_RESET 16
-
-static struct gpio_led rbmapl_leds[] __initdata = {
- {
- .name = "rb:green:power",
- .gpio = RBMAPL_GPIO_LED_POWER,
- .active_low = 0,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }, {
- .name = "rb:green:user",
- .gpio = RBMAPL_GPIO_LED_USER,
- .active_low = 0,
- }, {
- .name = "rb:green:eth",
- .gpio = RBMAPL_GPIO_LED_ETH,
- .active_low = 0,
- }, {
- .name = "rb:green:wlan",
- .gpio = RBMAPL_GPIO_LED_WLAN,
- .active_low = 0,
- },
-};
-
-/* RB 941L-2nD gpios */
-#define RBHAPL_GPIO_LED_USER 14
-#define RBHAPL_GPIO_BTN_RESET 16
-
-static struct gpio_led rbhapl_leds[] __initdata = {
- {
- .name = "rb:green:user",
- .gpio = RBHAPL_GPIO_LED_USER,
- .active_low = 1,
- },
-};
-
-/* common RB SSRs */
-#define RBSPI_SSR_GPIO_BASE 40
-#define RBSPI_SSR_GPIO(bit) (RBSPI_SSR_GPIO_BASE + (bit))
-
-/* RB 951Ui-2nD gpios */
-#define RB952_SSR_BIT_LED_LAN1 0
-#define RB952_SSR_BIT_LED_LAN2 1
-#define RB952_SSR_BIT_LED_LAN3 2
-#define RB952_SSR_BIT_LED_LAN4 3
-#define RB952_SSR_BIT_LED_LAN5 4
-#define RB952_SSR_BIT_USB_POWER 5
-#define RB952_SSR_BIT_LED_WLAN 6
-#define RB952_GPIO_SSR_CS 11
-#define RB952_GPIO_LED_USER 4
-#define RB952_GPIO_POE_POWER 14
-#define RB952_GPIO_POE_STATUS 12
-#define RB952_GPIO_BTN_RESET 16
-#define RB952_GPIO_USB_PWROFF RBSPI_SSR_GPIO(RB952_SSR_BIT_USB_POWER)
-#define RB952_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN1)
-#define RB952_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN2)
-#define RB952_GPIO_LED_LAN3 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN3)
-#define RB952_GPIO_LED_LAN4 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN4)
-#define RB952_GPIO_LED_LAN5 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN5)
-#define RB952_GPIO_LED_WLAN RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_WLAN)
-
-static struct gpio_led rb952_leds[] __initdata = {
- {
- .name = "rb:green:user",
- .gpio = RB952_GPIO_LED_USER,
- .active_low = 0,
- }, {
- .name = "rb:blue:wlan",
- .gpio = RB952_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "rb:green:port1",
- .gpio = RB952_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "rb:green:port2",
- .gpio = RB952_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "rb:green:port3",
- .gpio = RB952_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "rb:green:port4",
- .gpio = RB952_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "rb:green:port5",
- .gpio = RB952_GPIO_LED_LAN5,
- .active_low = 1,
- },
-};
-
-
-/* RB 962UiGS-5HacT2HnT gpios */
-#define RB962_WIFI_LED_1 1
-#define RB962_WIFI_LED_2 2
-#define RB962_GPIO_POE_STATUS 2
-#define RB962_GPIO_POE_POWER 3
-#define RB962_GPIO_LED_USER 12
-#define RB962_GPIO_USB_PWROFF 13
-#define RB962_GPIO_BTN_RESET 20
-
-static struct gpio_led rb962_leds_gpio[] __initdata = {
- {
- .name = "rb:green:user",
- .gpio = RB962_GPIO_LED_USER,
- .active_low = 1,
- },
-};
-
-static const struct ar8327_led_info rb962_leds_ar8327[] = {
- AR8327_LED_INFO(PHY0_0, HW, "rb:green:port1"),
- AR8327_LED_INFO(PHY1_0, HW, "rb:green:port2"),
- AR8327_LED_INFO(PHY2_0, HW, "rb:green:port3"),
- AR8327_LED_INFO(PHY3_0, HW, "rb:green:port4"),
- AR8327_LED_INFO(PHY4_0, HW, "rb:green:port5"),
-};
-
-static struct ar8327_pad_cfg rb962_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- .mac06_exchange_dis = true,
-};
-
-static struct ar8327_pad_cfg rb962_ar8327_pad6_cfg = {
- /* Use SGMII interface for GMAC6 of the AR8337 switch */
- .mode = AR8327_PAD_MAC_SGMII,
- .rxclk_delay_en = true,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
-};
-
-static struct ar8327_led_cfg rb962_ar8327_led_cfg = {
- .led_ctrl0 = 0xc737c737,
- .led_ctrl1 = 0x00000000,
- .led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x0030c300,
- .open_drain = false,
-};
-
-static struct ar8327_platform_data rb962_ar8327_data = {
- .pad0_cfg = &rb962_ar8327_pad0_cfg,
- .pad6_cfg = &rb962_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &rb962_ar8327_led_cfg,
- .num_leds = ARRAY_SIZE(rb962_leds_ar8327),
- .leds = rb962_leds_ar8327,
-};
-
-static struct mdio_board_info rb962_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &rb962_ar8327_data,
- },
-};
-
-/* RB wAP-2nD gpios */
-#define RBWAP_GPIO_LED_USER 14
-#define RBWAP_GPIO_LED_WLAN 11
-#define RBWAP_GPIO_BTN_RESET 16
-
-static struct gpio_led rbwap_leds[] __initdata = {
- {
- .name = "rb:green:user",
- .gpio = RBWAP_GPIO_LED_USER,
- .active_low = 1,
- }, {
- .name = "rb:green:wlan",
- .gpio = RBWAP_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-/* RB cAP-2nD gpios */
-#define RBCAP_GPIO_LED_1 14
-#define RBCAP_GPIO_LED_2 12
-#define RBCAP_GPIO_LED_3 11
-#define RBCAP_GPIO_LED_4 4
-#define RBCAP_GPIO_LED_ALL 13
-
-static struct gpio_led rbcap_leds[] __initdata = {
- {
- .name = "rb:green:rssi1",
- .gpio = RBCAP_GPIO_LED_1,
- .active_low = 1,
- }, {
- .name = "rb:green:rssi2",
- .gpio = RBCAP_GPIO_LED_2,
- .active_low = 1,
- }, {
- .name = "rb:green:rssi3",
- .gpio = RBCAP_GPIO_LED_3,
- .active_low = 1,
- }, {
- .name = "rb:green:rssi4",
- .gpio = RBCAP_GPIO_LED_4,
- .active_low = 1,
- },
-};
-
-/* RB mAP-2nD gpios */
-#define RBMAP_SSR_BIT_LED_LAN1 0
-#define RBMAP_SSR_BIT_LED_LAN2 1
-#define RBMAP_SSR_BIT_LED_POEO 2
-#define RBMAP_SSR_BIT_LED_USER 3
-#define RBMAP_SSR_BIT_LED_WLAN 4
-#define RBMAP_SSR_BIT_USB_POWER 5
-#define RBMAP_SSR_BIT_LED_APCAP 6
-#define RBMAP_GPIO_BTN_RESET 16
-#define RBMAP_GPIO_SSR_CS 11
-#define RBMAP_GPIO_LED_POWER 4
-#define RBMAP_GPIO_POE_POWER 14
-#define RBMAP_GPIO_POE_STATUS 12
-#define RBMAP_GPIO_USB_PWROFF RBSPI_SSR_GPIO(RBMAP_SSR_BIT_USB_POWER)
-#define RBMAP_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN1)
-#define RBMAP_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_LAN2)
-#define RBMAP_GPIO_LED_POEO RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_POEO)
-#define RBMAP_GPIO_LED_USER RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_USER)
-#define RBMAP_GPIO_LED_WLAN RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_WLAN)
-#define RBMAP_GPIO_LED_APCAP RBSPI_SSR_GPIO(RBMAP_SSR_BIT_LED_APCAP)
-
-static struct gpio_led rbmap_leds[] __initdata = {
- {
- .name = "rb:green:power",
- .gpio = RBMAP_GPIO_LED_POWER,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }, {
- .name = "rb:green:eth1",
- .gpio = RBMAP_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "rb:green:eth2",
- .gpio = RBMAP_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "rb:red:poe_out",
- .gpio = RBMAP_GPIO_LED_POEO,
- .active_low = 1,
- }, {
- .name = "rb:green:user",
- .gpio = RBMAP_GPIO_LED_USER,
- .active_low = 1,
- }, {
- .name = "rb:green:wlan",
- .gpio = RBMAP_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "rb:green:ap_cap",
- .gpio = RBMAP_GPIO_LED_APCAP,
- .active_low = 1,
- },
-};
-
-/* RB LHG 5nD gpios */
-#define RBLHG_GPIO_LED_0 13
-#define RBLHG_GPIO_LED_1 12
-#define RBLHG_GPIO_LED_2 4
-#define RBLHG_GPIO_LED_3 21
-#define RBLHG_GPIO_LED_4 18
-#define RBLHG_GPIO_LED_ETH 14
-#define RBLHG_GPIO_LED_POWER 11
-#define RBLHG_GPIO_LED_USER 20
-#define RBLHG_GPIO_BTN_RESET 15
-
-static struct gpio_led rblhg_leds[] __initdata = {
- {
- .name = "rb:green:rssi0",
- .gpio = RBLHG_GPIO_LED_0,
- .active_low = 1,
- }, {
- .name = "rb:green:rssi1",
- .gpio = RBLHG_GPIO_LED_1,
- .active_low = 1,
- }, {
- .name = "rb:green:rssi2",
- .gpio = RBLHG_GPIO_LED_2,
- .active_low = 1,
- }, {
- .name = "rb:green:rssi3",
- .gpio = RBLHG_GPIO_LED_3,
- .active_low = 1,
- }, {
- .name = "rb:green:rssi4",
- .gpio = RBLHG_GPIO_LED_4,
- .active_low = 1,
- }, {
- .name = "rb:green:eth",
- .gpio = RBLHG_GPIO_LED_ETH,
- .active_low = 1,
- }, {
- .name = "rb:green:user",
- .gpio = RBLHG_GPIO_LED_USER,
- .active_low = 1,
- }, {
- .name = "rb:blue:power",
- .gpio = RBLHG_GPIO_LED_POWER,
- .active_low = 0,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
-};
-
-/* RB w APG-5HacT2HnD (wAP AC) gpios*/
-#define RBWAPGSC_WIFI_LED_1 1
-#define RBWAPGSC_WIFI_LED_2 8
-#define RBWAPGSC_WIFI_LED_3 9
-#define RBWAPGSC_GPIO_LED_POWER 16
-#define RBWAPGSC_GPIO_BTN_RESET 1
-#define RBWAPGSC_GPIO_MDIO_MDC 12
-#define RBWAPGSC_GPIO_MDIO_DATA 11
-#define RBWAPGSC_MDIO_PHYADDR 0
-
-static struct gpio_led rbwapgsc_leds[] __initdata = {
- {
- .name = "rb:green:power",
- .gpio = RBWAPGSC_GPIO_LED_POWER,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
-};
-
-static struct mdio_gpio_platform_data rbwapgsc_mdio_data = {
- .mdc = RBWAPGSC_GPIO_MDIO_MDC,
- .mdio = RBWAPGSC_GPIO_MDIO_DATA,
- .phy_mask = ~BIT(RBWAPGSC_MDIO_PHYADDR),
-};
-
-static struct platform_device rbwapgsc_phy_device = {
- .name = "mdio-gpio",
- .id = 1,
- .dev = {
- .platform_data = &rbwapgsc_mdio_data
- },
-};
-
-static struct at803x_platform_data rbwapgsc_at803x_data = {
- .override_sgmii_aneg = 1,
-};
-
-static struct mdio_board_info rbwapgsc_mdio_info[] = {
- {
- .bus_id = "gpio-1",
- .mdio_addr = RBWAPGSC_MDIO_PHYADDR,
- .platform_data = &rbwapgsc_at803x_data,
- },
-};
-
-/* RB911L GPIOs */
-#define RB911L_GPIO_BTN_RESET 15
-#define RB911L_GPIO_LED_1 13
-#define RB911L_GPIO_LED_2 12
-#define RB911L_GPIO_LED_3 4
-#define RB911L_GPIO_LED_4 21
-#define RB911L_GPIO_LED_5 18
-#define RB911L_GPIO_LED_ETH 20
-#define RB911L_GPIO_LED_POWER 11
-#define RB911L_GPIO_LED_USER 3
-#define RB911L_GPIO_PIN_HOLE 14 /* for reference, active low */
-
-static struct gpio_led rb911l_leds[] __initdata = {
- {
- .name = "rb:green:eth",
- .gpio = RB911L_GPIO_LED_ETH,
- .active_low = 1,
- }, {
- .name = "rb:green:led1",
- .gpio = RB911L_GPIO_LED_1,
- .active_low = 1,
- }, {
- .name = "rb:green:led2",
- .gpio = RB911L_GPIO_LED_2,
- .active_low = 1,
- }, {
- .name = "rb:green:led3",
- .gpio = RB911L_GPIO_LED_3,
- .active_low = 1,
- }, {
- .name = "rb:green:led4",
- .gpio = RB911L_GPIO_LED_4,
- .active_low = 1,
- }, {
- .name = "rb:green:led5",
- .gpio = RB911L_GPIO_LED_5,
- .active_low = 1,
- }, {
- .name = "rb:green:power",
- .gpio = RB911L_GPIO_LED_POWER,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- .active_low = 1,
- .open_drain = 1,
- }, {
- .name = "rb:green:user",
- .gpio = RB911L_GPIO_LED_USER,
- .active_low = 1,
- .open_drain = 1,
- },
-};
-
-/* RB 931-2nD gpios */
-#define RB931_GPIO_BTN_RESET 0
-#define RB931_GPIO_BTN_MODE 9
-#define RB931_GPIO_LED_USER 1
-
-static struct gpio_keys_button rb931_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RB931_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "Mode button",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RB931_GPIO_BTN_MODE,
- .active_low = 1,
- }
-};
-
-static struct gpio_led rb931_leds[] __initdata = {
- {
- .name = "rb:green:user",
- .gpio = RB931_GPIO_LED_USER,
- .active_low = 1,
- },
-};
-
-/* RB wAP R-2nD (wAP R) gpios*/
-#define RBWAPR_GPIO_LED_USER 14
-#define RBWAPR_GPIO_LED1 12
-#define RBWAPR_GPIO_LED2 13
-#define RBWAPR_GPIO_LED3 3
-#define RBWAPR_GPIO_PCIE_PWROFF 15
-#define RBWAPR_GPIO_CONTROL 10
-#define RBWAPR_GPIO_BTN_RESET 16
-
-static struct gpio_led rbwapr_leds[] __initdata = {
- {
- .name = "rb:green:user",
- .gpio = RBWAPR_GPIO_LED_USER,
- .active_low = 0,
- },{
- .name = "rb:green:led1",
- .gpio = RBWAPR_GPIO_LED1,
- .active_low = 1,
- },{
- .name = "rb:green:led2",
- .gpio = RBWAPR_GPIO_LED2,
- .active_low = 1,
- },{
- .name = "rb:green:led3",
- .gpio = RBWAPR_GPIO_LED3,
- .active_low = 0,
- },
-};
-
-
-static struct gen_74x164_chip_platform_data rbspi_ssr_data = {
- .base = RBSPI_SSR_GPIO_BASE,
- .num_registers = 1,
-};
-
-/* the spi-ath79 driver can only natively handle CS0. Other CS are bit-banged */
-static int rbspi_spi_cs_gpios[] = {
- -ENOENT, /* CS0 is always -ENOENT: natively handled */
- -ENOENT, /* CS1 can be updated by the code as necessary */
-};
-
-static struct ath79_spi_platform_data rbspi_ath79_spi_data = {
- .bus_num = 0,
- .cs_gpios = rbspi_spi_cs_gpios,
-};
-
-/*
- * Global spi_board_info: devices that don't have an SSR only have the SPI NOR
- * flash on bus0 CS0, while devices that have an SSR add it on the same bus CS1
- */
-static struct spi_board_info rbspi_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p80",
- .platform_data = &rbspi_spi_flash_data,
- }, {
- .bus_num = 0,
- .chip_select = 1,
- .max_speed_hz = 25000000,
- .modalias = "74x164",
- .platform_data = &rbspi_ssr_data,
- }
-};
-
-void __init rbspi_wlan_init(int wmac_offset)
-{
- char *art_buf;
- u8 wlan_mac[ETH_ALEN];
-
- art_buf = rb_get_wlan_data();
- if (!art_buf)
- return;
-
- ath79_init_mac(wlan_mac, ath79_mac_base, wmac_offset);
- ath79_register_wmac(art_buf + 0x1000, wlan_mac);
-
- kfree(art_buf);
-}
-
-#define RBSPI_MACH_BUFLEN 64
-/*
- * Common platform init routine for all SPI NOR devices.
- */
-static __init const struct rb_info *rbspi_platform_setup(void)
-{
- const struct rb_info *info;
- char buf[RBSPI_MACH_BUFLEN] = "MikroTik ";
- char *str;
- int len = RBSPI_MACH_BUFLEN - strlen(buf) - 1;
-
- info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x20000);
- if (!info)
- return NULL;
-
- if (info->board_name) {
- str = "RouterBOARD ";
- if (strncmp(info->board_name, str, strlen(str))) {
- strncat(buf, str, len);
- len -= strlen(str);
- }
- strncat(buf, info->board_name, len);
- }
- else
- strncat(buf, "UNKNOWN", len);
-
- mips_set_machine_name(buf);
-
- /* fix partitions based on flash parsing */
- rbspi_init_partitions(info);
-
- return info;
-}
-
-/*
- * Common peripherals init routine for all SPI NOR devices.
- * Sets SPI and USB.
- */
-static void __init rbspi_peripherals_setup(u32 flags)
-{
- unsigned spi_n;
-
- if (flags & RBSPI_HAS_SSR)
- spi_n = ARRAY_SIZE(rbspi_spi_info);
- else
- spi_n = 1; /* only one device on bus0 */
-
- rbspi_ath79_spi_data.num_chipselect = spi_n;
- rbspi_ath79_spi_data.cs_gpios = rbspi_spi_cs_gpios;
- ath79_register_spi(&rbspi_ath79_spi_data, rbspi_spi_info, spi_n);
-
- if (flags & RBSPI_HAS_USB)
- ath79_register_usb();
-
- if (flags & RBSPI_HAS_PCI)
- ath79_register_pci();
-}
-
-/*
- * Common network init routine for all SPI NOR devices.
- * Sets LAN/WAN/WLAN.
- */
-static void __init rbspi_network_setup(u32 flags, int gmac1_offset,
- int wmac0_offset, int wmac1_offset)
-{
- /* for QCA953x that will init mdio1_device/data */
- ath79_register_mdio(0, 0x0);
- if (flags & RBSPI_HAS_MDIO1)
- ath79_register_mdio(1, 0x0);
-
- if (flags & RBSPI_HAS_WAN4) {
- ath79_setup_ar934x_eth_cfg(0);
-
- /* set switch to oper mode 1, PHY4 connected to CPU */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask |= BIT(4);
-
- /* init GMAC0 connected to PHY4 at 100M */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_register_eth(0);
- } else {
- /* set the SoC to SW_ONLY_MODE, which connects all PHYs
- * to the internal switch.
- * We hijack ath79_setup_ar934x_eth_cfg() to set the switch in
- * the QCA953x, this works because this configuration bit is
- * the same as the AR934x. There's no equivalent function for
- * QCA953x for now. */
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
- }
-
- /* init GMAC1 */
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, gmac1_offset);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-
- if (flags & RBSPI_HAS_WLAN0)
- rbspi_wlan_init(wmac0_offset);
-
- if (flags & RBSPI_HAS_WLAN1)
- rbspi_wlan_init(wmac1_offset);
-}
-
-static __init void rbspi_register_reset_button(int gpio)
-{
- rbspi_gpio_keys_reset[0].gpio = gpio;
- ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rbspi_gpio_keys_reset),
- rbspi_gpio_keys_reset);
-}
-
-/*
- * Init the mAP lite hardware (QCA953x).
- * The mAP L-2nD (mAP lite) has a single ethernet port, connected to PHY0.
- * Trying to use GMAC0 in direct mode was unsucessful, so we're
- * using SW_ONLY_MODE, which connects PHY0 to MAC1 on the internal
- * switch, which is connected to GMAC1 on the SoC. GMAC0 is unused.
- */
-static void __init rbmapl_setup(void)
-{
- u32 flags = RBSPI_HAS_WLAN0;
-
- if (!rbspi_platform_setup())
- return;
-
- rbspi_peripherals_setup(flags);
-
- /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */
- rbspi_network_setup(flags, 0, 1, 0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmapl_leds), rbmapl_leds);
-
- /* mAP lite has a single reset button as gpio 16 */
- rbspi_register_reset_button(RBMAPL_GPIO_BTN_RESET);
-
- /* clear internal multiplexing */
- ath79_gpio_output_select(RBMAPL_GPIO_LED_ETH, AR934X_GPIO_OUT_GPIO);
- ath79_gpio_output_select(RBMAPL_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO);
-}
-
-/*
- * Init the hAP lite hardware (QCA953x).
- * The 941-2nD (hAP lite) has 4 ethernet ports, with port 2-4
- * being assigned to LAN on the casing, and port 1 being assigned
- * to "internet" (WAN) on the casing. Port 1 is connected to PHY3.
- * Since WAN is neither PHY0 nor PHY4, we cannot use GMAC0 with this device.
- */
-static void __init rbhapl_setup(void)
-{
- u32 flags = RBSPI_HAS_WLAN0;
-
- if (!rbspi_platform_setup())
- return;
-
- rbspi_peripherals_setup(flags);
-
- /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 4 */
- rbspi_network_setup(flags, 0, 4, 0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rbhapl_leds), rbhapl_leds);
-
- /* hAP lite has a single reset button as gpio 16 */
- rbspi_register_reset_button(RBHAPL_GPIO_BTN_RESET);
-}
-
-/*
- * The hAP, hAP ac lite, hEX lite and hEX PoE lite share the same platform
- */
-static void __init rbspi_952_750r2_setup(u32 flags)
-{
- if (flags & RBSPI_HAS_SSR)
- rbspi_spi_cs_gpios[1] = RB952_GPIO_SSR_CS;
-
- rbspi_peripherals_setup(flags);
-
- /*
- * GMAC1 is HW MAC + 1, WLAN0 MAC IS HW MAC + 5 (hAP),
- * WLAN1 MAC IS HW MAC + 6 (hAP ac lite)
- */
- rbspi_network_setup(flags, 1, 5, 6);
-
- if (flags & RBSPI_HAS_USB)
- gpio_request_one(RB952_GPIO_USB_PWROFF, GPIOF_ACTIVE_LOW |
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power off");
-
- if (flags & RBSPI_HAS_POE)
- gpio_request_one(RB952_GPIO_POE_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "POE power");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rb952_leds), rb952_leds);
-
- /* These devices have a single reset button as gpio 16 */
- rbspi_register_reset_button(RB952_GPIO_BTN_RESET);
-}
-
-/*
- * Init the hAP (ac lite) hardware (QCA953x).
- * The 951Ui-2nD (hAP) has 5 ethernet ports, with ports 2-5 being assigned
- * to LAN on the casing, and port 1 being assigned to "internet" (WAN).
- * Port 1 is connected to PHY4 (the ports are labelled in reverse physical
- * number), so the SoC can be set to connect GMAC0 to PHY4 and GMAC1 to the
- * internal switch for the LAN ports.
- * The device also has USB, PoE output and an SSR used for LED multiplexing.
- * The 952Ui-5ac2nD (hAP ac lite) is nearly identical to the hAP, it adds a
- * QCA9887 5GHz radio via PCI and moves 2.4GHz from WLAN0 to WLAN1.
- */
-static void __init rb952_setup(void)
-{
- u32 flags = RBSPI_HAS_WAN4 | RBSPI_HAS_USB |
- RBSPI_HAS_SSR | RBSPI_HAS_POE;
-
- if (!rbspi_platform_setup())
- return;
-
- /* differentiate the hAP from the hAP ac lite */
- if (strstr(mips_get_machine_name(), "952Ui-5ac2nD"))
- flags |= RBSPI_HAS_WLAN1 | RBSPI_HAS_PCI;
- else
- flags |= RBSPI_HAS_WLAN0;
-
- rbspi_952_750r2_setup(flags);
-}
-
-/*
- * Init the hEX (PoE) lite hardware (QCA953x).
- * The 750UP r2 (hEX PoE lite) is nearly identical to the hAP, only without
- * WLAN. The 750 r2 (hEX lite) is nearly identical to the 750UP r2, only
- * without USB and POE. The 750P Pbr2 (Powerbox) is nearly identical to hEX PoE
- * lite, only without USB. It shares the same bootloader board identifier.
- */
-static void __init rb750upr2_setup(void)
-{
- u32 flags = RBSPI_HAS_WAN4 | RBSPI_HAS_SSR;
-
- if (!rbspi_platform_setup())
- return;
-
- /* differentiate the hEX lite from the hEX PoE lite */
- if (strstr(mips_get_machine_name(), "750UP r2"))
- flags |= RBSPI_HAS_USB | RBSPI_HAS_POE;
-
- /* differentiate the Powerbox from the hEX lite */
- else if (strstr(mips_get_machine_name(), "750P r2"))
- flags |= RBSPI_HAS_POE;
-
- rbspi_952_750r2_setup(flags);
-}
-
-/*
- * Init the hAP ac / 962UiGS-5HacT2HnT hardware (QCA9558).
- * The hAP ac has 5 ethernet ports provided by an AR8337 switch. Port 1 is
- * assigned to WAN, ports 2-5 are assigned to LAN. Port 0 is connected to the
- * SoC, ports 1-5 of the switch are connected to physical ports 1-5 in order.
- * The SFP cage is not assigned by default on RouterOS. Extra work is required
- * to support this interface as it is directly connected to the SoC (eth1).
- * Wireless is provided by a 2.4GHz radio on the SoC (WLAN1) and a 5GHz radio
- * attached via PCI (QCA9880). Red and green WLAN LEDs are populated however
- * they are not attached to GPIOs, extra work is required to support these.
- * PoE and USB output power control is supported.
- */
-static void __init rb962_setup(void)
-{
- u32 flags = RBSPI_HAS_USB | RBSPI_HAS_POE | RBSPI_HAS_PCI;
-
- if (!rbspi_platform_setup())
- return;
-
- rbspi_peripherals_setup(flags);
-
- /* Do not call rbspi_network_setup as we have a discrete switch chip */
- ath79_eth0_pll_data.pll_1000 = 0xae000000;
- ath79_eth0_pll_data.pll_100 = 0xa0000101;
- ath79_eth0_pll_data.pll_10 = 0xa0001313;
-
- ath79_register_mdio(0, 0x0);
- mdiobus_register_board_info(rb962_mdio0_info,
- ARRAY_SIZE(rb962_mdio0_info));
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_register_eth(0);
-
- /* WLAN1 MAC is HW MAC + 7 */
- rbspi_wlan_init(7);
-
- if (flags & RBSPI_HAS_USB)
- gpio_request_one(RB962_GPIO_USB_PWROFF, GPIOF_ACTIVE_LOW |
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power off");
-
- /* PoE output GPIO is inverted, set GPIOF_ACTIVE_LOW for consistency */
- if (flags & RBSPI_HAS_POE)
- gpio_request_one(RB962_GPIO_POE_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_ACTIVE_LOW |
- GPIOF_EXPORT_DIR_FIXED,
- "POE power");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rb962_leds_gpio),
- rb962_leds_gpio);
-
- /* This device has a single reset button as gpio 20 */
- rbspi_register_reset_button(RB962_GPIO_BTN_RESET);
-}
-
-/*
- * Init the LHG hardware (AR9344).
- * The LHG 5nD has a single ethernet port connected to PHY0.
- * Wireless is provided via 5GHz WLAN1.
- */
-static void __init rblhg_setup(void)
-{
- u32 flags = RBSPI_HAS_WLAN1 | RBSPI_HAS_MDIO1;
-
- if (!rbspi_platform_setup())
- return;
-
- rbspi_peripherals_setup(flags);
-
- /* GMAC1 is HW MAC, WLAN1 MAC is HW MAC + 1 */
- rbspi_network_setup(flags, 0, 0, 1);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rblhg_leds), rblhg_leds);
-
- rbspi_register_reset_button(RBLHG_GPIO_BTN_RESET);
-}
-
-/*
- * Init the wAP hardware.
- * The wAP 2nD has a single ethernet port.
- */
-static void __init rbwap_setup(void)
-{
- u32 flags = RBSPI_HAS_WLAN0;
-
- if (!rbspi_platform_setup())
- return;
-
- rbspi_peripherals_setup(flags);
-
- /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */
- rbspi_network_setup(flags, 0, 1, 0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwap_leds), rbwap_leds);
-
- /* wAP has a single reset button as GPIO 16 */
- rbspi_register_reset_button(RBWAP_GPIO_BTN_RESET);
-}
-
-/*
- * Init the cAP hardware (EXPERIMENTAL).
- * The cAP 2nD has a single ethernet port, and a global LED switch.
- */
-static void __init rbcap_setup(void)
-{
- u32 flags = RBSPI_HAS_WLAN0;
-
- if (!rbspi_platform_setup())
- return;
-
- rbspi_peripherals_setup(flags);
-
- /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */
- rbspi_network_setup(flags, 0, 1, 0);
-
- gpio_request_one(RBCAP_GPIO_LED_ALL,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "LEDs enable");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rbcap_leds), rbcap_leds);
-}
-
-/*
- * Init the mAP hardware.
- * The mAP 2nD has two ethernet ports, PoE output, SSR for LED
- * multiplexing and USB port.
- */
-static void __init rbmap_setup(void)
-{
- u32 flags = RBSPI_HAS_USB | RBSPI_HAS_WLAN0 |
- RBSPI_HAS_SSR | RBSPI_HAS_POE;
-
- if (!rbspi_platform_setup())
- return;
-
- rbspi_spi_cs_gpios[1] = RBMAP_GPIO_SSR_CS;
- rbspi_peripherals_setup(flags);
-
- /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 2 */
- rbspi_network_setup(flags, 0, 2, 0);
-
- if (flags & RBSPI_HAS_POE)
- gpio_request_one(RBMAP_GPIO_POE_POWER,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "POE power");
-
- if (flags & RBSPI_HAS_USB)
- gpio_request_one(RBMAP_GPIO_USB_PWROFF,
- GPIOF_OUT_INIT_HIGH | GPIOF_ACTIVE_LOW |
- GPIOF_EXPORT_DIR_FIXED,
- "USB power off");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rbmap_leds), rbmap_leds);
-
- /* mAP 2nD has a single reset button as gpio 16 */
- rbspi_register_reset_button(RBMAP_GPIO_BTN_RESET);
-}
-
-/*
- * Init the wAPGSC (RB wAPG-5HacT2HnD // wAP AC) hardware.
- * The wAPGSC has one Ethernet port via AR8033 with PoE input, dual radio (SoC
- * 2.4 GHz and external QCA9880) and a ZT2046Q temperature and voltage sensor
- * (currently not supported).
- */
-static void __init rbwapgsc_setup(void)
-{
- u32 flags = RBSPI_HAS_PCI;
-
- if (!rbspi_platform_setup())
- return;
-
- rbspi_peripherals_setup(flags);
-
- platform_device_register(&rbwapgsc_phy_device);
-
- mdiobus_register_board_info(rbwapgsc_mdio_info,
- ARRAY_SIZE(rbwapgsc_mdio_info));
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
- ath79_eth1_data.mii_bus_dev = &rbwapgsc_phy_device.dev;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.phy_mask = BIT(RBWAPGSC_MDIO_PHYADDR);
- ath79_eth1_data.enable_sgmii_fixup = 1;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
- ath79_eth1_pll_data.pll_100 = 0x80000101;
- ath79_eth1_pll_data.pll_10 = 0x80001313;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_register_eth(1);
-
- rbspi_wlan_init(2);
-
- rbspi_register_reset_button(RBWAPGSC_GPIO_BTN_RESET);
-
- ath79_gpio_function_enable(QCA955X_GPIO_FUNC_JTAG_DISABLE|
- QCA955X_GPIO_REG_OUT_FUNC4|
- QCA955X_GPIO_REG_OUT_FUNC3);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwapgsc_leds),
- rbwapgsc_leds);
-}
-
-/*
- * Setup the 911L hardware (AR9344).
- */
-static void __init rb911l_setup(void)
-{
- const struct rb_info *info;
-
- info = rbspi_platform_setup();
- if (!info)
- return;
-
- if (!rb_has_hw_option(info, RB_HW_OPT_NO_NAND)) {
- /*
- * Old hardware revisions might be equipped with a NAND flash
- * chip instead of the 16MiB SPI NOR device. Those boards are
- * not supported at the moment, so throw a warning and skip
- * the peripheral setup to avoid messing up the data in the
- * flash chip.
- */
- WARN(1, "The NAND flash on this board is not supported.\n");
- } else {
- rbspi_peripherals_setup(0);
- }
-
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(1);
-
- rbspi_wlan_init(1);
-
- rbspi_register_reset_button(RB911L_GPIO_BTN_RESET);
-
- /* Make the eth LED controllable by software. */
- ath79_gpio_output_select(RB911L_GPIO_LED_ETH, AR934X_GPIO_OUT_GPIO);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rb911l_leds), rb911l_leds);
-}
-
-/*
- * Init the hAP mini hardware (QCA953x).
- * The 931-2nD (hAP mini) has 3 ethernet ports, with port 2-3
- * being assigned to LAN on the casing, and port 1 being assigned
- * to "internet" (WAN) on the casing. Port 1 is connected to PHY2.
- * Since WAN is neither PHY0 nor PHY4, we cannot use GMAC0 with this device.
- */
-static void __init rb931_setup(void)
-{
- u32 flags = RBSPI_HAS_WLAN0;
-
- if (!rbspi_platform_setup())
- return;
-
- rbspi_peripherals_setup(flags);
-
- /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 3 */
- rbspi_network_setup(flags, 0, 3, 0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rb931_leds), rb931_leds);
-
- /* hAP mini has two buttons */
- ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rb931_gpio_keys),
- rb931_gpio_keys);
-}
-
-/*
- * Init the wAP R hardware.
- * The wAP R-2nD has a single ethernet port and a mini PCIe slot.
- * The OEM source shows it has usb (used over PCIe for LTE devices),
- * and the 'control' GPIO is assumed to be an output pin not tied to an LED.
- */
-static void __init rbwapr_setup(void)
-{
- u32 flags = RBSPI_HAS_WLAN0 | RBSPI_HAS_USB | RBSPI_HAS_PCI;
-
- if (!rbspi_platform_setup())
- return;
-
- rbspi_peripherals_setup(flags);
-
- /* GMAC1 is HW MAC, WLAN0 MAC is HW MAC + 1 */
- rbspi_network_setup(flags, 0, 1, 0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rbwapr_leds), rbwapr_leds);
-
- gpio_request_one(RBWAPR_GPIO_PCIE_PWROFF, GPIOF_OUT_INIT_HIGH |
- GPIOF_ACTIVE_LOW | GPIOF_EXPORT_DIR_FIXED,
- "PCIE power off");
-
- gpio_request_one(RBWAPR_GPIO_CONTROL, GPIOF_OUT_INIT_LOW |
- GPIOF_ACTIVE_LOW | GPIOF_EXPORT_DIR_FIXED,
- "control");
-
- rbspi_register_reset_button(RBWAPR_GPIO_BTN_RESET);
-}
-
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup);
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup);
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_911L, "911L", rb911l_setup);
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_952, "952-hb", rb952_setup);
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_962, "962", rb962_setup);
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_750UPR2, "750-hb", rb750upr2_setup);
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_LHG5, "lhg", rblhg_setup);
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAP, "wap-hb", rbwap_setup);
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAPR, "wap-lte", rbwapr_setup);
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_CAP, "cap-hb", rbcap_setup);
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAP, "map2-hb", rbmap_setup);
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAPAC, "wapg-sc", rbwapgsc_setup);
-MIPS_MACHINE_NONAME(ATH79_MACH_RB_931, "931", rb931_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbsxtlite.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbsxtlite.c
deleted file mode 100644
index 7eb0e54151..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbsxtlite.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * MikroTik RouterBOARD SXT Lite support
- *
- * Copyright (C) 2012 Stijn Tintel <stijn@linux-ipv6.be>
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2013 Vyacheslav Adamanov <adamanov@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt) "sxtlite: " fmt
-
-#include <linux/version.h>
-#include <linux/phy.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/mtd/mtd.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#include <linux/rle.h>
-#include <linux/routerboot.h>
-#include <linux/gpio.h>
-#include <linux/version.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-nfc.h"
-#include "dev-wmac.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "routerboot.h"
-#include <linux/ar8216_platform.h>
-
-#define SXTLITE_GPIO_NAND_NCE 14
-#define SXTLITE_GPIO_LED_USER 3
-#define SXTLITE_GPIO_LED_1 13
-#define SXTLITE_GPIO_LED_2 12
-#define SXTLITE_GPIO_LED_3 4
-#define SXTLITE_GPIO_LED_4 21
-#define SXTLITE_GPIO_LED_5 18
-#define SXTLITE_GPIO_LED_POWER 11
-
-#define SXTLITE_GPIO_BUZZER 19
-
-#define SXTLITE_GPIO_BTN_RESET 15
-
-#define SXTLITE_KEYS_POLL_INTERVAL 20
-#define SXTLITE_KEYS_DEBOUNCE_INTERVAL (3 * SXTLITE_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition rbsxtlite_nand_partitions[] = {
- {
- .name = "booter",
- .offset = 0,
- .size = (256 * 1024),
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .offset = (256 * 1024),
- .size = (4 * 1024 * 1024) - (256 * 1024),
- },
- {
- .name = "ubi",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct gpio_led rbsxtlite_leds_gpio[] __initdata = {
- {
- .name = "rb:green:user",
- .gpio = SXTLITE_GPIO_LED_USER,
- .active_low = 1,
- },
- {
- .name = "rb:green:led1",
- .gpio = SXTLITE_GPIO_LED_1,
- .active_low = 1,
- },
- {
- .name = "rb:green:led2",
- .gpio = SXTLITE_GPIO_LED_2,
- .active_low = 1,
- },
- {
- .name = "rb:green:led3",
- .gpio = SXTLITE_GPIO_LED_3,
- .active_low = 1,
- },
- {
- .name = "rb:green:led4",
- .gpio = SXTLITE_GPIO_LED_4,
- .active_low = 1,
- },
- {
- .name = "rb:green:led5",
- .gpio = SXTLITE_GPIO_LED_5,
- .active_low = 1,
- },
- {
- .name = "rb:green:power",
- .gpio = SXTLITE_GPIO_LED_POWER,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
-};
-
-static struct gpio_keys_button rbsxtlite_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = SXTLITE_KEYS_DEBOUNCE_INTERVAL,
- .gpio = SXTLITE_GPIO_BTN_RESET,
- .active_low = 0,
- },
-};
-
-static int __init rbsxtlite_rbinfo_init(void)
-{
- const struct rb_info *info;
-
- info = rb_init_info((void *)(KSEG1ADDR(AR71XX_SPI_BASE)), 0x10000);
- if (!info)
- return -EINVAL;
- return 0;
-
-}
-
-void __init rbsxtlite_wlan_init(void)
-{
- char *art_buf;
- u8 wlan_mac[ETH_ALEN];
-
- art_buf = rb_get_wlan_data();
- if (art_buf == NULL)
- return;
-
- ath79_init_mac(wlan_mac, ath79_mac_base, 1);
- ath79_register_wmac(art_buf + 0x1000, wlan_mac);
-
- kfree(art_buf);
-}
-
-static void rbsxtlite_nand_select_chip(int chip_no)
-{
- switch (chip_no) {
- case 0:
- gpio_set_value(SXTLITE_GPIO_NAND_NCE, 0);
- break;
- default:
- gpio_set_value(SXTLITE_GPIO_NAND_NCE, 1);
- break;
- }
- ndelay(500);
-}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
-static struct nand_ecclayout rbsxtlite_nand_ecclayout = {
- .eccbytes = 6,
- .eccpos = { 8, 9, 10, 13, 14, 15 },
- .oobavail = 9,
- .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-#else
-
-static int rbsxtlite_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 8;
- oobregion->length = 3;
- return 0;
- case 1:
- oobregion->offset = 13;
- oobregion->length = 3;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static int rbsxtlite_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 0;
- oobregion->length = 4;
- return 0;
- case 1:
- oobregion->offset = 4;
- oobregion->length = 1;
- return 0;
- case 2:
- oobregion->offset = 6;
- oobregion->length = 2;
- return 0;
- case 3:
- oobregion->offset = 11;
- oobregion->length = 2;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static const struct mtd_ooblayout_ops rbsxtlite_nand_ecclayout_ops = {
- .ecc = rbsxtlite_ooblayout_ecc,
- .free = rbsxtlite_ooblayout_free,
-};
-#endif /* < 4.6 */
-
-static int rbsxtlite_nand_scan_fixup(struct mtd_info *mtd)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- struct nand_chip *chip = mtd->priv;
-#endif
-
- if (mtd->writesize == 512) {
- /*
- * Use the OLD Yaffs-1 OOB layout, otherwise RouterBoot
- * will not be able to find the kernel that we load.
- */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- chip->ecc.layout = &rbsxtlite_nand_ecclayout;
-#else
- mtd_set_ooblayout(mtd, &rbsxtlite_nand_ecclayout_ops);
-#endif
- }
-
- return 0;
-}
-
-void __init rbsxtlite_gpio_init(void)
-{
- gpio_request_one(SXTLITE_GPIO_NAND_NCE, GPIOF_OUT_INIT_HIGH, "NAND nCE");
-}
-
-void __init rbsxtlite_nand_init(void)
-{
- ath79_nfc_set_scan_fixup(rbsxtlite_nand_scan_fixup);
- ath79_nfc_set_parts(rbsxtlite_nand_partitions,
- ARRAY_SIZE(rbsxtlite_nand_partitions));
- ath79_nfc_set_select_chip(rbsxtlite_nand_select_chip);
- ath79_nfc_set_swap_dma(true);
- ath79_register_nfc();
-}
-
-
-static void __init rbsxtlite_setup(void)
-{
- if(rbsxtlite_rbinfo_init())
- return;
- rbsxtlite_nand_init();
- rbsxtlite_wlan_init();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rbsxtlite_leds_gpio),
- rbsxtlite_leds_gpio);
- ath79_register_gpio_keys_polled(-1, SXTLITE_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rbsxtlite_gpio_keys),
- rbsxtlite_gpio_keys);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(1, 0x0);
-
- /* GMAC0 is left unused */
-
- /* GMAC1 is connected to MAC0 on the internal switch */
- /* The ethernet port connects to PHY P0, which connects to MAC1
- on the internal switch */
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-
-
-}
-
-
-MIPS_MACHINE(ATH79_MACH_RB_SXTLITE2ND, "sxt2n", "MikroTik RouterBOARD SXT Lite2",
- rbsxtlite_setup);
-
-MIPS_MACHINE(ATH79_MACH_RB_SXTLITE5ND, "sxt5n", "MikroTik RouterBOARD SXT Lite5",
- rbsxtlite_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-re450.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-re450.c
deleted file mode 100644
index 991aa1c9a9..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-re450.c
+++ /dev/null
@@ -1,239 +0,0 @@
-/*
- * TP-LINK RE355/RE450 board support
- *
- * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2016 Tal Keren <kooolk@gmail.com>
- * Copyright (c) 2018 Henryk Heisig <hyniu@o2.pl>
- *
- * Based on the Qualcomm Atheros AP135/AP136 reference board support code
- * Copyright (c) 2012 Qualcomm Atheros
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/mdio-gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define RE450_GPIO_LED_SYSTEM 12
-#define RE450_GPIO_LED_WLAN2G 13
-#define RE450_GPIO_LED_WLAN5G 14
-#define RE450_GPIO_LED_LAN_DATA 17
-#define RE450_GPIO_LED_JUMPSTART 21
-#define RE450_GPIO_LED_JUMPSTART_RED 22
-#define RE450_GPIO_LED_LAN_LINK 23
-
-#define RE450_GPIO_BTN_RESET 18
-#define RE450_GPIO_BTN_LED 19
-#define RE450_GPIO_BTN_JUMPSTART 20
-
-#define RE450_GPIO_SMI_MDIO 1
-#define RE450_GPIO_SMI_MDC 3
-
-#define RE450_LAN_PHYADDR 4
-
-#define RE450_KEYS_POLL_INTERVAL 20 /* msecs */
-#define RE450_KEYS_DEBOUNCE_INTERVAL (3 * RE450_KEYS_POLL_INTERVAL)
-
-#define RE450_WMAC_CALDATA_OFFSET 0x1000
-
-static const char *tl_re450_part_probes[] = {
- "cmdlinepart",
- NULL,
-};
-
-static struct flash_platform_data tl_re450_flash_data = {
- .part_probes = tl_re450_part_probes,
-};
-
-static struct gpio_led re355_leds_gpio[] __initdata = {
- {
- .name = "re355:blue:power",
- .gpio = RE450_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "re355:blue:wlan2g",
- .gpio = RE450_GPIO_LED_WLAN2G,
- .active_low = 1,
- },
- {
- .name = "re355:blue:wlan5g",
- .gpio = RE450_GPIO_LED_WLAN5G,
- .active_low = 1,
- },
- {
- .name = "re355:blue:wps",
- .gpio = RE450_GPIO_LED_JUMPSTART,
- },
- {
- .name = "re355:red:wps",
- .gpio = RE450_GPIO_LED_JUMPSTART_RED,
- },
- {
- .name = "re355:green:lan_data",
- .gpio = RE450_GPIO_LED_LAN_DATA,
- .active_low = 1,
- },
- {
- .name = "re355:green:lan_link",
- .gpio = RE450_GPIO_LED_LAN_LINK,
- .active_low = 1,
- },
-};
-
-static struct gpio_led re450_leds_gpio[] __initdata = {
- {
- .name = "re450:blue:power",
- .gpio = RE450_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "re450:blue:wlan2g",
- .gpio = RE450_GPIO_LED_WLAN2G,
- .active_low = 1,
- },
- {
- .name = "re450:blue:wlan5g",
- .gpio = RE450_GPIO_LED_WLAN5G,
- .active_low = 1,
- },
- {
- .name = "re450:blue:wps",
- .gpio = RE450_GPIO_LED_JUMPSTART,
- },
- {
- .name = "re450:red:wps",
- .gpio = RE450_GPIO_LED_JUMPSTART_RED,
- },
- {
- .name = "re450:green:lan_data",
- .gpio = RE450_GPIO_LED_LAN_DATA,
- .active_low = 1,
- },
- {
- .name = "re450:green:lan_link",
- .gpio = RE450_GPIO_LED_LAN_LINK,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button re450_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = RE450_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RE450_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RE450_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RE450_GPIO_BTN_JUMPSTART,
- .active_low = 1,
- },
- {
- .desc = "Control LED button",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = RE450_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RE450_GPIO_BTN_LED,
- .active_low = 1,
- },
-};
-
-static struct mdio_gpio_platform_data re450_mdio = {
- .mdc = RE450_GPIO_SMI_MDC,
- .mdio = RE450_GPIO_SMI_MDIO,
- .phy_mask = ~BIT(RE450_LAN_PHYADDR),
-};
-
-static struct platform_device re450_phy_device = {
- .name = "mdio-gpio",
- .id = 0,
- .dev = {
- .platform_data = &re450_mdio,
- },
-};
-
-static void __init rex5x_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f610008);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(&tl_re450_flash_data);
- ath79_register_gpio_keys_polled(-1, RE450_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(re450_gpio_keys),
- re450_gpio_keys);
-
- ath79_init_mac(tmpmac, mac, -1);
- ath79_register_wmac(art + RE450_WMAC_CALDATA_OFFSET, tmpmac);
-
- ath79_register_pci();
-
- /* MDIO Interface */
- platform_device_register(&re450_phy_device);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- /* GMAC0 is connected to the RGMII interface to an Atheros AR8035-A */
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.mii_bus_dev = &re450_phy_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(RE450_LAN_PHYADDR);
- ath79_eth0_pll_data.pll_1000 = 0xa6000000;
- ath79_eth0_pll_data.pll_100 = 0xa0000101;
- ath79_eth0_pll_data.pll_10 = 0x80001313;
- ath79_register_eth(0);
-}
-
-static void __init re355_setup(void)
-{
- rex5x_setup();
- ath79_register_leds_gpio(-1, ARRAY_SIZE(re355_leds_gpio),
- re355_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_RE355, "RE355", "TP-LINK RE355",
- re355_setup)
-
-static void __init re450_setup(void)
-{
- rex5x_setup();
- ath79_register_leds_gpio(-1, ARRAY_SIZE(re450_leds_gpio),
- re450_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_RE450, "RE450", "TP-LINK RE450",
- re450_setup)
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c
deleted file mode 100644
index 332b0780d0..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * eTactica EG-200 board, based on 8devices Carambola2 module
- *
- * Copyright (C) 2015 Karl Palsson <karlp@etactica.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define RME_EG200_GPIO_LED_WLAN 0
-#define RME_EG200_GPIO_LED_ETH0 13
-#define RME_EG200_GPIO_LED_ETACTICA 15
-#define RME_EG200_GPIO_LED_MODBUS 16
-
-#define RME_EG200_GPIO_BTN_RESTORE 11
-
-#define RME_EG200_KEYS_POLL_INTERVAL 20 /* msecs */
-#define RME_EG200_KEYS_DEBOUNCE_INTERVAL (3 * RME_EG200_KEYS_POLL_INTERVAL)
-
-#define RME_EG200_MAC0_OFFSET 0x0000
-#define RME_EG200_CALDATA_OFFSET 0x1000
-#define RME_EG200_WMAC_MAC_OFFSET 0x1002
-
-static struct gpio_led rme_eg200_leds_gpio[] __initdata = {
- {
- .name = "eg200:red:wlan",
- .gpio = RME_EG200_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "eg200:red:eth0",
- .gpio = RME_EG200_GPIO_LED_ETH0,
- .active_low = 1,
- }, {
- .name = "eg200:red:etactica",
- .gpio = RME_EG200_GPIO_LED_ETACTICA,
- .active_low = 0,
- }, {
- .name = "eg200:red:modbus",
- .gpio = RME_EG200_GPIO_LED_MODBUS,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button rme_eg200_keys[] __initdata = {
- {
- .desc = "restore button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = RME_EG200_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RME_EG200_GPIO_BTN_RESTORE,
- .active_low = 1,
- },
-};
-
-static void __init rme_eg200_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
- ath79_register_wmac(art + RME_EG200_CALDATA_OFFSET,
- art + RME_EG200_WMAC_MAC_OFFSET);
-
- ath79_setup_ar933x_phy4_switch(true, true);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + RME_EG200_MAC0_OFFSET, 0);
-
- ath79_register_mdio(0, 0x0);
-
- /* WAN port */
- ath79_register_eth(0);
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rme_eg200_leds_gpio),
- rme_eg200_leds_gpio);
- ath79_register_gpio_keys_polled(-1, RME_EG200_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rme_eg200_keys),
- rme_eg200_keys);
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RME_EG200, "RME-EG200", "eTactica EG-200",
- rme_eg200_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rut9xx.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rut9xx.c
deleted file mode 100644
index 43a2a78c67..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rut9xx.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * Teltonika RUT900 series boards support
- *
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_data/pca953x.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define RUT9XX_GPIO_LED_LAN1 14
-#define RUT9XX_GPIO_LED_LAN2 13
-#define RUT9XX_GPIO_LED_LAN3 22
-#define RUT9XX_GPIO_LED_WAN 1
-
-#define RUT9XX_PCA9539_GPIO_BASE 32
-#define RUT9XX_PCA9539_GPIO_SIGNAL1 (0 + RUT9XX_PCA9539_GPIO_BASE)
-#define RUT9XX_PCA9539_GPIO_SIGNAL2 (1 + RUT9XX_PCA9539_GPIO_BASE)
-#define RUT9XX_PCA9539_GPIO_SIGNAL3 (2 + RUT9XX_PCA9539_GPIO_BASE)
-#define RUT9XX_PCA9539_GPIO_SIGNAL4 (3 + RUT9XX_PCA9539_GPIO_BASE)
-#define RUT9XX_PCA9539_GPIO_SIGNAL5 (4 + RUT9XX_PCA9539_GPIO_BASE)
-#define RUT9XX_PCA9539_GPIO_STATUS_R (5 + RUT9XX_PCA9539_GPIO_BASE)
-#define RUT9XX_PCA9539_GPIO_STATUS_G (6 + RUT9XX_PCA9539_GPIO_BASE)
-
-#define RUT9XX_GPIO_BTN_RESET 15
-
-#define RUT9XX_GPIO_I2C_SCK 16
-#define RUT9XX_GPIO_I2C_SDA 17
-
-#define RUT9XX_GPIO_EXT_LNA0 2
-
-#define RUT9XX_WMAC_CALDATA_OFFSET 0x1000
-
-#define RUT9XX_KEYS_POLL_INTERVAL 20
-#define RUT9XX_KEYS_DEBOUNCE_INTERVAL (3 * RUT9XX_KEYS_POLL_INTERVAL)
-
-static struct gpio_led rut900_leds_gpio[] __initdata = {
- {
- .name = "rut900:green:lan1",
- .gpio = RUT9XX_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "rut900:green:lan2",
- .gpio = RUT9XX_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "rut900:green:lan3",
- .gpio = RUT9XX_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "rut900:green:signal1",
- .gpio = RUT9XX_PCA9539_GPIO_SIGNAL1,
- .active_low = 0,
- }, {
- .name = "rut900:green:signal2",
- .gpio = RUT9XX_PCA9539_GPIO_SIGNAL2,
- .active_low = 0,
- }, {
- .name = "rut900:green:signal3",
- .gpio = RUT9XX_PCA9539_GPIO_SIGNAL3,
- .active_low = 0,
- }, {
- .name = "rut900:green:signal4",
- .gpio = RUT9XX_PCA9539_GPIO_SIGNAL4,
- .active_low = 0,
- }, {
- .name = "rut900:green:signal5",
- .gpio = RUT9XX_PCA9539_GPIO_SIGNAL5,
- .active_low = 0,
- }, {
- .name = "rut900:green:status",
- .gpio = RUT9XX_PCA9539_GPIO_STATUS_G,
- .active_low = 0,
- }, {
- .name = "rut900:green:wan",
- .gpio = RUT9XX_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "rut900:red:status",
- .gpio = RUT9XX_PCA9539_GPIO_STATUS_R,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button rut900_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RUT9XX_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RUT9XX_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct i2c_gpio_platform_data rut900_i2c_gpio_data = {
- .sda_pin = RUT9XX_GPIO_I2C_SDA,
- .scl_pin = RUT9XX_GPIO_I2C_SCK,
- .udelay = 10,
-};
-
-static struct platform_device rut900_i2c_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &rut900_i2c_gpio_data,
- },
-};
-
-static struct pca953x_platform_data rut9xx_pca9539_data = {
- .gpio_base = RUT9XX_PCA9539_GPIO_BASE,
- .irq_base = -1,
-};
-
-static struct i2c_board_info rut900_i2c_devs[] __initdata = {
- {
- I2C_BOARD_INFO("pca9539", 0x74),
- .platform_data = &rut9xx_pca9539_data,
- },
-};
-
-static void __init rut900_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1f030000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1f020000);
- u8 wlan_mac[ETH_ALEN];
-
- ath79_register_m25p80(NULL);
-
- ath79_register_mdio(1, 0x0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = 0xf1;
-
- /* LAN */
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- platform_device_register(&rut900_i2c_device);
- i2c_register_board_info(0, rut900_i2c_devs,
- ARRAY_SIZE(rut900_i2c_devs));
-
- /* Disable JTAG (enables GPIO0-3) */
- ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rut900_leds_gpio),
- rut900_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, RUT9XX_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rut900_gpio_keys),
- rut900_gpio_keys);
-
- ath79_wmac_set_ext_lna_gpio(0, RUT9XX_GPIO_EXT_LNA0);
-
- ath79_init_mac(wlan_mac, mac, 2);
- ath79_register_wmac(art + RUT9XX_WMAC_CALDATA_OFFSET, wlan_mac);
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_RUT9XX, "RUT900", "Teltonika RUT900", rut900_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rw2458n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rw2458n.c
deleted file mode 100644
index bb7c2475bd..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rw2458n.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Redwave RW2458N support
- *
- * Copyright (C) 2011-2013 Cezary Jackiewicz <cezary@eko.one.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define RW2458N_GPIO_LED_D3 1
-#define RW2458N_GPIO_LED_D4 0
-#define RW2458N_GPIO_LED_D5 11
-#define RW2458N_GPIO_LED_D6 7
-#define RW2458N_GPIO_BTN_RESET 12
-
-#define RW2458N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define RW2458N_KEYS_DEBOUNCE_INTERVAL (3 * RW2458N_KEYS_POLL_INTERVAL)
-
-static struct gpio_keys_button rw2458n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = RW2458N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = RW2458N_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-#define RW2458N_WAN_PHYMASK BIT(4)
-
-static struct gpio_led rw2458n_leds_gpio[] __initdata = {
- {
- .name = "rw2458n:green:d3",
- .gpio = RW2458N_GPIO_LED_D3,
- .active_low = 1,
- }, {
- .name = "rw2458n:green:d4",
- .gpio = RW2458N_GPIO_LED_D4,
- .active_low = 1,
- }, {
- .name = "rw2458n:green:d5",
- .gpio = RW2458N_GPIO_LED_D5,
- .active_low = 1,
- }, {
- .name = "rw2458n:green:d6",
- .gpio = RW2458N_GPIO_LED_D6,
- .active_low = 1,
- }
-};
-
-static void __init rw2458n_setup(void)
-{
- u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_mdio(0, ~RW2458N_WAN_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(rw2458n_leds_gpio),
- rw2458n_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, RW2458N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(rw2458n_gpio_keys),
- rw2458n_gpio_keys);
- ath79_register_usb();
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_RW2458N, "RW2458N", "Redwave RW2458N",
- rw2458n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c
deleted file mode 100644
index 3a7d654b85..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc1750.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Abicom International Scorpion SC1750 support.
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2017 Conor O'Gorman <i@conorogorman.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define SC1750_GPIO_LED_POWER 11
-#define SC1750_GPIO_LED_ERR1 12
-#define SC1750_GPIO_LED_WLAN 13
-#define SC1750_GPIO_LED_ERR2 14
-#define SC1750_GPIO_LED_OK3 15
-#define SC1750_GPIO_LED_ERR3 16
-#define SC1750_GPIO_BTN_RESET 4
-
-#define SC1750_KEYS_POLL_INTERVAL 20 /* msecs */
-#define SC1750_KEYS_DEBOUNCE_INTERVAL (3 * SC1750_KEYS_POLL_INTERVAL)
-
-#define SC1750_MAC0_OFFSET 0
-#define SC1750_MAC1_OFFSET 6
-#define SC1750_WMAC_CALDATA_OFFSET 0x1000
-#define SC1750_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led sc1750_leds_gpio[] __initdata = {
- {
- .name = "sc1750:green:power",
- .gpio = SC1750_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "sc1750:red:power",
- .gpio = SC1750_GPIO_LED_ERR1,
- .active_low = 1,
- },
- {
- .name = "sc1750:green:wlan",
- .gpio = SC1750_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "sc1750:red:wlan",
- .gpio = SC1750_GPIO_LED_ERR2,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button sc1750_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = SC1750_KEYS_DEBOUNCE_INTERVAL,
- .gpio = SC1750_GPIO_BTN_RESET,
- .active_low = 0,
- }
-};
-
-static struct at803x_platform_data at803x_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 0,
- .enable_rgmii_tx_delay = 0,
-};
-
-static struct mdio_board_info sc1750_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 1,
- .platform_data = &at803x_data,
- },
-};
-
-static void __init sc1750_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(sc1750_leds_gpio),
- sc1750_leds_gpio);
- ath79_register_gpio_keys_polled(-1, SC1750_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(sc1750_gpio_keys),
- sc1750_gpio_keys);
-
- ath79_register_usb();
- ath79_register_nfc();
-
- ath79_register_wmac(art + SC1750_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_mdio(0, 0);
- mdiobus_register_board_info(sc1750_mdio0_info,
- ARRAY_SIZE(sc1750_mdio0_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + SC1750_MAC0_OFFSET, 0);
-
- ath79_eth0_pll_data.pll_1000 = 0xa6000101;
- ath79_eth0_pll_data.pll_100 = 0xa4000101;
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = 0xF;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(1);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_SC1750, "SC1750", "Abicom SC1750", sc1750_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c
deleted file mode 100644
index 6dd81ecd5a..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc300m.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * Abicom International Scorpion SC300M Module support.
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2017 Conor O'Gorman <i@conorogorman.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define SC300M_GPIO_LED_WLAN 0
-#define SC300M_GPIO_LED_POWER 1
-
-#define SC300M_GPIO_BTN_RESET 17
-
-#define SC300M_KEYS_POLL_INTERVAL 20 /* msecs */
-#define SC300M_KEYS_DEBOUNCE_INTERVAL (3 * SC300M_KEYS_POLL_INTERVAL)
-
-#define SC300M_MAC0_OFFSET 0
-#define SC300M_MAC1_OFFSET 6
-#define SC300M_WMAC_CALDATA_OFFSET 0x1000
-#define SC300M_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led sc300m_leds_gpio[] __initdata = {
- {
- .name = "sc300m:blue:wlan",
- .gpio = SC300M_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "sc300m:blue:power",
- .gpio = SC300M_GPIO_LED_POWER,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button sc300m_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = SC300M_KEYS_DEBOUNCE_INTERVAL,
- .gpio = SC300M_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct at803x_platform_data at803x_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 0,
- .enable_rgmii_tx_delay = 0,
-};
-
-static struct mdio_board_info sc300m_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 1,
- .platform_data = &at803x_data,
- },
-};
-
-static void __init sc300m_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(sc300m_leds_gpio),
- sc300m_leds_gpio);
- ath79_register_gpio_keys_polled(-1, SC300M_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(sc300m_gpio_keys),
- sc300m_gpio_keys);
-
- ath79_register_usb();
- ath79_register_nfc();
-
- ath79_register_wmac(art + SC300M_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_mdio(0, 0);
- mdiobus_register_board_info(sc300m_mdio0_info,
- ARRAY_SIZE(sc300m_mdio0_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + SC300M_MAC0_OFFSET, 0);
-
- ath79_eth0_pll_data.pll_1000 = 0xa6000101;
- ath79_eth0_pll_data.pll_100 = 0xa4000101;
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = 0xF;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(1);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_SC300M, "SC300M", "Abicom SC300M", sc300m_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc450.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc450.c
deleted file mode 100644
index dee183e790..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc450.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Abicom International Scorpion SC450 support.
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2017 Conor O'Gorman <i@conorogorman.net>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define SC450_GPIO_LED_POWER 13
-#define SC450_GPIO_LED_ERR1 14
-#define SC450_GPIO_LED_ERR2 15
-#define SC450_GPIO_LED_WLAN 16
-#define SC450_GPIO_BTN_RESET 17
-#define SC450_GPIO_WP 18
-#define SC450_GPIO_POE 19
-#define SC450_GPIO_RX_LOS 20
-#define SC450_GPIO_MOD_GND 21
-#define SC450_GPIO_MOD_SCL 22
-#define SC450_GPIO_MOD_SDA 23
-
-#define SC450_KEYS_POLL_INTERVAL 20 /* msecs */
-#define SC450_KEYS_DEBOUNCE_INTERVAL (3 * SC450_KEYS_POLL_INTERVAL)
-
-#define SC450_MAC0_OFFSET 0
-#define SC450_MAC1_OFFSET 6
-#define SC450_WMAC_CALDATA_OFFSET 0x1000
-#define SC450_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led sc450_leds_gpio[] __initdata = {
- {
- .name = "sc450:green:power",
- .gpio = SC450_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "sc450:red:power",
- .gpio = SC450_GPIO_LED_ERR1,
- .active_low = 1,
- },
- {
- .name = "sc450:green:wlan",
- .gpio = SC450_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "sc450:red:wlan",
- .gpio = SC450_GPIO_LED_ERR2,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button sc450_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = SC450_KEYS_DEBOUNCE_INTERVAL,
- .gpio = SC450_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct at803x_platform_data at803x_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 0,
- .enable_rgmii_tx_delay = 0,
-};
-
-static struct mdio_board_info sc450_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 1,
- .platform_data = &at803x_data,
- },
-};
-
-static void __init sc450_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(sc450_leds_gpio),
- sc450_leds_gpio);
- ath79_register_gpio_keys_polled(-1, SC450_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(sc450_gpio_keys),
- sc450_gpio_keys);
-
- ath79_register_usb();
- ath79_register_nfc();
-
- ath79_register_wmac(art + SC450_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_mdio(0, 0);
- mdiobus_register_board_info(sc450_mdio0_info,
- ARRAY_SIZE(sc450_mdio0_info));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + SC450_MAC0_OFFSET, 0);
-
- ath79_eth0_pll_data.pll_1000 = 0xa6000101;
- ath79_eth0_pll_data.pll_100 = 0xa4000101;
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = 0xF;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(1);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_SC450, "SC450", "Abicom SC450", sc450_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c
deleted file mode 100644
index 2520e960d3..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-smart-300.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * NC-LINK SMART-300 board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ag71xx_platform.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define SMART_300_GPIO_LED_WLAN 13
-#define SMART_300_GPIO_LED_WAN 18
-#define SMART_300_GPIO_LED_LAN4 19
-#define SMART_300_GPIO_LED_LAN3 12
-#define SMART_300_GPIO_LED_LAN2 21
-#define SMART_300_GPIO_LED_LAN1 20
-#define SMART_300_GPIO_LED_SYSTEM 15
-#define SMART_300_GPIO_LED_POWER 14
-
-#define SMART_300_GPIO_BTN_RESET 17
-#define SMART_300_GPIO_SW_RFKILL 16
-
-#define SMART_300_KEYS_POLL_INTERVAL 20 /* msecs */
-#define SMART_300_KEYS_DEBOUNCE_INTERVAL (3 * SMART_300_KEYS_POLL_INTERVAL)
-
-#define SMART_300_GPIO_MASK 0x007fffff
-
-static const char *smart_300_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data smart_300_flash_data = {
- .part_probes = smart_300_part_probes,
-};
-
-static struct gpio_led smart_300_leds_gpio[] __initdata = {
- {
- .name = "nc-link:green:lan1",
- .gpio = SMART_300_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "nc-link:green:lan2",
- .gpio = SMART_300_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "nc-link:green:lan3",
- .gpio = SMART_300_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "nc-link:green:lan4",
- .gpio = SMART_300_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "nc-link:green:system",
- .gpio = SMART_300_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "nc-link:green:wan",
- .gpio = SMART_300_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "nc-link:green:wlan",
- .gpio = SMART_300_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button smart_300_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = SMART_300_KEYS_DEBOUNCE_INTERVAL,
- .gpio = SMART_300_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init smart_300_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(smart_300_leds_gpio),
- smart_300_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, SMART_300_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(smart_300_gpio_keys),
- smart_300_gpio_keys);
-
- ath79_register_m25p80(&smart_300_flash_data);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
- /* GMAC0 is connected to the PHY0 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, mac);
-
- gpio_request(SMART_300_GPIO_LED_POWER, "power");
- gpio_direction_output(SMART_300_GPIO_LED_POWER, GPIOF_OUT_INIT_LOW);
-}
-
-MIPS_MACHINE(ATH79_MACH_SMART_300, "SMART-300", "NC-LINK SMART-300",
- smart_300_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-som9331.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-som9331.c
deleted file mode 100644
index eef5bcedc2..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-som9331.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * OpenEmbed SOM9331 board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * 5/27/2016 - Modified by Allan Nick Pedrana <nik9993@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define SOM9331_GPIO_LED_WLAN 27
-#define SOM9331_GPIO_LED_SYSTEM 0
-#define SOM9331_GPIO_LED_2 13
-#define SOM9331_GPIO_LED_3 14
-#define SOM9331_GPIO_LED_5 16
-#define SOM9331_GPIO_LED_WAN SOM9331_GPIO_LED_2
-#define SOM9331_GPIO_LED_LAN1 SOM9331_GPIO_LED_3
-#define SOM9331_GPIO_LED_LAN2 SOM9331_GPIO_LED_5
-#define SOM9331_GPIO_BTN_RESET 11
-
-#define SOM9331_KEYS_POLL_INTERVAL 20 /* msecs */
-#define SOM9331_KEYS_DEBOUNCE_INTERVAL (3 * SOM9331_KEYS_POLL_INTERVAL)
-
-static const char *som9331_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data som9331_flash_data = {
- .part_probes = som9331_part_probes,
-};
-
-static struct gpio_led som9331_leds_gpio[] __initdata = {
- {
- .name = "som9331:red:wlan",
- .gpio = SOM9331_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "som9331:orange:wan",
- .gpio = SOM9331_GPIO_LED_WAN,
- .active_low = 0,
- },
- {
- .name = "som9331:orange:lan1",
- .gpio = SOM9331_GPIO_LED_LAN1,
- .active_low = 0,
- },
- {
- .name = "som9331:orange:lan2",
- .gpio = SOM9331_GPIO_LED_LAN2,
- .active_low = 0,
- },
- {
- .name = "som9331:blue:system",
- .gpio = SOM9331_GPIO_LED_SYSTEM,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button som9331_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = SOM9331_KEYS_DEBOUNCE_INTERVAL,
- .gpio = SOM9331_GPIO_BTN_RESET,
- .active_low = 0,
- }
-};
-
-static void __init som9331_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_setup_ar933x_phy4_switch(true, true);
-
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_m25p80(&som9331_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(som9331_leds_gpio),
- som9331_leds_gpio);
- ath79_register_gpio_keys_polled(-1, SOM9331_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(som9331_gpio_keys),
- som9331_gpio_keys);
-
- ath79_register_usb();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
-
- /* WAN port */
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_SOM9331, "SOM9331", "OpenEmbed SOM9331", som9331_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sr3200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-sr3200.c
deleted file mode 100644
index 72d46c0c47..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-sr3200.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * Support for YunCore SR3200 and XD3200 boards
- *
- * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/ar8216_platform.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define SR3200_XD3200_GPIO_LED_SYSTEM 1
-#define SR3200_XD3200_GPIO_LED_WLAN2G 19
-
-#define SR3200_XD3200_GPIO_BTN_RESET 2
-
-#define SR3200_XD3200_KEYS_POLL_INTERVAL 20
-#define SR3200_XD3200_KEYS_DEBOUNCE_INTERVAL \
- (3 * SR3200_XD3200_KEYS_POLL_INTERVAL)
-
-static struct gpio_led xd3200_leds_gpio[] __initdata = {
- {
- .name = "xd3200:green:system",
- .gpio = SR3200_XD3200_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "xd3200:blue:wlan2g",
- .gpio = SR3200_XD3200_GPIO_LED_WLAN2G,
- .active_low = 1,
- },
-};
-
-static struct gpio_led sr3200_leds_gpio[] __initdata = {
- {
- .name = "sr3200:green:system",
- .gpio = SR3200_XD3200_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "sr3200:green:wlan2g",
- .gpio = SR3200_XD3200_GPIO_LED_WLAN2G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button sr3200_xd3200_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = SR3200_XD3200_KEYS_DEBOUNCE_INTERVAL,
- .gpio = SR3200_XD3200_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static const struct ar8327_led_info sr3200_leds_qca833x[] = {
- AR8327_LED_INFO(PHY0_0, HW, "sr3200:green:lan1"),
- AR8327_LED_INFO(PHY1_0, HW, "sr3200:green:lan2"),
- AR8327_LED_INFO(PHY2_0, HW, "sr3200:green:lan3"),
- AR8327_LED_INFO(PHY3_0, HW, "sr3200:green:lan4"),
- AR8327_LED_INFO(PHY4_0, HW, "sr3200:green:wan"),
-};
-
-static const struct ar8327_led_info xd3200_leds_qca833x[] = {
- AR8327_LED_INFO(PHY1_0, HW, "xd3200:green:lan"),
- AR8327_LED_INFO(PHY2_0, HW, "xd3200:green:wan"),
-};
-
-/* Blink rate: 1 Gbps -> 8 hz, 100 Mbs -> 4 Hz, 10 Mbps -> 2 Hz */
-static struct ar8327_led_cfg sr3200_xd3200_qca833x_led_cfg = {
- .led_ctrl0 = 0xcf37cf37,
- .led_ctrl1 = 0xcf37cf37,
- .led_ctrl2 = 0xcf37cf37,
- .led_ctrl3 = 0x0,
- .open_drain = true,
-};
-
-static struct ar8327_pad_cfg sr3200_xd3200_qca833x_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data sr3200_xd3200_qca833x_data = {
- .pad0_cfg = &sr3200_xd3200_qca833x_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &sr3200_xd3200_qca833x_led_cfg,
-};
-
-static struct mdio_board_info sr3200_xd3200_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &sr3200_xd3200_qca833x_data,
- },
-};
-
-static void __init sr3200_xd3200_common_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_mdio(0, 0x0);
- mdiobus_register_board_info(sr3200_xd3200_mdio0_info,
- ARRAY_SIZE(sr3200_xd3200_mdio0_info));
-
- /* GMAC0 is connected to QCA8334/QCA8337N switch */
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-
- ath79_register_wmac(mac + 0x1000, NULL);
-
- ap91_pci_init(mac + 0x5000, NULL);
-
- ath79_gpio_direction_select(SR3200_XD3200_GPIO_LED_SYSTEM, true);
- ath79_gpio_direction_select(SR3200_XD3200_GPIO_LED_WLAN2G, true);
-
- /* Mute LEDs on boot */
- gpio_set_value(SR3200_XD3200_GPIO_LED_SYSTEM, 1);
- gpio_set_value(SR3200_XD3200_GPIO_LED_WLAN2G, 1);
-
- ath79_gpio_output_select(SR3200_XD3200_GPIO_LED_SYSTEM, 0);
- ath79_gpio_output_select(SR3200_XD3200_GPIO_LED_WLAN2G, 0);
-
- ath79_register_gpio_keys_polled(-1, SR3200_XD3200_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(sr3200_xd3200_gpio_keys),
- sr3200_xd3200_gpio_keys);
-}
-
-static void __init sr3200_setup(void)
-{
- sr3200_xd3200_qca833x_data.leds = sr3200_leds_qca833x;
- sr3200_xd3200_qca833x_data.num_leds = ARRAY_SIZE(sr3200_leds_qca833x);
-
- sr3200_xd3200_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(sr3200_leds_gpio),
- sr3200_leds_gpio);
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_SR3200, "SR3200", "YunCore SR3200", sr3200_setup);
-
-static void __init xd3200_setup(void)
-{
- sr3200_xd3200_qca833x_data.leds = xd3200_leds_qca833x;
- sr3200_xd3200_qca833x_data.num_leds = ARRAY_SIZE(xd3200_leds_qca833x);
-
- sr3200_xd3200_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(xd3200_leds_gpio),
- xd3200_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_XD3200, "XD3200", "YunCore XD3200", xd3200_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-t830.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-t830.c
deleted file mode 100644
index ffdb2ca533..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-t830.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * YunCore T830 board support
- *
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define T830_GPIO_LED_LAN1 16
-#define T830_GPIO_LED_LAN2 15
-#define T830_GPIO_LED_LAN3 14
-#define T830_GPIO_LED_LAN4 11
-#define T830_GPIO_LED_USB 13
-#define T830_GPIO_LED_WAN 4
-#define T830_GPIO_LED_WLAN 12
-
-#define T830_GPIO_BTN_RESET 17
-
-#define T830_KEYS_POLL_INTERVAL 20 /* msec */
-#define T830_KEYS_DEBOUNCE_INTERVAL (3 * T830_KEYS_POLL_INTERVAL)
-
-#define T830_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led t830_gpio_leds[] __initdata = {
- {
- .name = "t830:green:lan1",
- .gpio = T830_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "t830:green:lan2",
- .gpio = T830_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "t830:green:lan3",
- .gpio = T830_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "t830:green:lan4",
- .gpio = T830_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "t830:green:usb",
- .gpio = T830_GPIO_LED_USB,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
- }, {
- .name = "t830:green:wan",
- .gpio = T830_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "t830:green:wlan",
- .gpio = T830_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button t830_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = T830_KEYS_DEBOUNCE_INTERVAL,
- .gpio = T830_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init t830_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask |= BIT(4);
-
- /* LAN */
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac + 6, 0);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-
- ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
- AR934X_GPIO_FUNC_CLK_OBS4_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(t830_gpio_leds),
- t830_gpio_leds);
-
- ath79_register_gpio_keys_polled(-1, T830_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(t830_gpio_keys),
- t830_gpio_keys);
-
- ath79_register_usb();
- ath79_register_wmac(art, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_T830, "T830", "YunCore T830", t830_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tellstick-znet-lite.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tellstick-znet-lite.c
deleted file mode 100644
index 0950d9a99d..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tellstick-znet-lite.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Telldus TellStick ZNet Lite board support
- *
- * Copyright (C) 2016 Micke Prag <micke.prag@telldus.se>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TELLSTICK_GPIO_LED_SYSTEM 27
-#define TELLSTICK_GPIO_LED_BLUE 0
-#define TELLSTICK_GPIO_LED_RED 14
-#define TELLSTICK_GPIO_LED_GREEN 15
-#define TELLSTICK_GPIO_LED_LAN_GREEN 16
-#define TELLSTICK_GPIO_LED_LAN_ORANGE 17
-
-#define TELLSTICK_GPIO_BTN_RESET 11
-
-#define TELLSTICK_GPIO_RF433_RESET 13
-
-#define TELLSTICK_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TELLSTICK_KEYS_DEBOUNCE_INTERVAL (3 * TELLSTICK_KEYS_POLL_INTERVAL)
-
-static const char *tellstick_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tellstick_flash_data = {
- .part_probes = tellstick_part_probes,
-};
-
-static struct gpio_led tellstick_leds_gpio[] __initdata = {
- {
- .name = "tellstick:white:system",
- .gpio = TELLSTICK_GPIO_LED_SYSTEM,
- .active_low = 0,
- },
- {
- .name = "tellstick:blue:status",
- .gpio = TELLSTICK_GPIO_LED_BLUE,
- .active_low = 0,
- },
- {
- .name = "tellstick:red:status",
- .gpio = TELLSTICK_GPIO_LED_RED,
- .active_low = 0,
- },
- {
- .name = "tellstick:green:status",
- .gpio = TELLSTICK_GPIO_LED_GREEN,
- .active_low = 0,
- },
- {
- .name = "tellstick:green:lan",
- .gpio = TELLSTICK_GPIO_LED_LAN_GREEN,
- .active_low = 0,
- },
- {
- .name = "tellstick:orange:lan",
- .gpio = TELLSTICK_GPIO_LED_LAN_ORANGE,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button tellstick_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TELLSTICK_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TELLSTICK_GPIO_BTN_RESET,
- .active_low = 0,
- }
-};
-
-static void __init tellstick_znet_lite_setup(void)
-{
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac[ETH_ALEN];
- memcpy(&mac, (u8 *) KSEG1ADDR(0x1f01fc00), sizeof(mac));
-
- ath79_gpio_function_disable(
- AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN
- );
-
- ath79_register_m25p80(&tellstick_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tellstick_leds_gpio),
- tellstick_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TELLSTICK_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tellstick_gpio_keys),
- tellstick_gpio_keys);
-
- gpio_request_one(TELLSTICK_GPIO_RF433_RESET,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "rf433 reset");
- ath79_register_usb();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, (u8 *)mac, 0);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
-
- // wlan0 mac needs to be different then eth0
- mac[3] += 1;
- ath79_register_wmac(ee, (u8 *)mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TELLSTICK_ZNET_LITE, "TELLSTICK-ZNET-LITE", "Telldus TellStick ZNet Lite",
- tellstick_znet_lite_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-632brp.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-632brp.c
deleted file mode 100644
index 855664e562..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-632brp.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- * TrendNET TEW-632BRP board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define TEW_632BRP_GPIO_LED_STATUS 1
-#define TEW_632BRP_GPIO_LED_WPS 3
-#define TEW_632BRP_GPIO_LED_WLAN 6
-#define TEW_632BRP_GPIO_BTN_WPS 12
-#define TEW_632BRP_GPIO_BTN_RESET 21
-
-#define TEW_632BRP_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TEW_632BRP_KEYS_DEBOUNCE_INTERVAL (3 * TEW_632BRP_KEYS_POLL_INTERVAL)
-
-#define TEW_632BRP_CONFIG_ADDR 0x1f020000
-#define TEW_632BRP_CONFIG_SIZE 0x10000
-
-static struct gpio_led tew_632brp_leds_gpio[] __initdata = {
- {
- .name = "tew-632brp:green:status",
- .gpio = TEW_632BRP_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "tew-632brp:blue:wps",
- .gpio = TEW_632BRP_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "tew-632brp:green:wlan",
- .gpio = TEW_632BRP_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tew_632brp_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_632BRP_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TEW_632BRP_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_632BRP_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-#define TEW_632BRP_LAN_PHYMASK BIT(0)
-#define TEW_632BRP_WAN_PHYMASK BIT(4)
-#define TEW_632BRP_MDIO_MASK (~(TEW_632BRP_LAN_PHYMASK | \
- TEW_632BRP_WAN_PHYMASK))
-
-static void __init tew_632brp_setup(void)
-{
- const char *config = (char *) KSEG1ADDR(TEW_632BRP_CONFIG_ADDR);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac[6];
- u8 *wlan_mac = NULL;
-
- if (ath79_nvram_parse_mac_addr(config, TEW_632BRP_CONFIG_SIZE,
- "lan_mac=", mac) == 0) {
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
- wlan_mac = mac;
- }
-
- ath79_register_mdio(0, TEW_632BRP_MDIO_MASK);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.phy_mask = TEW_632BRP_LAN_PHYMASK;
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = TEW_632BRP_WAN_PHYMASK;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_632brp_leds_gpio),
- tew_632brp_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TEW_632BRP_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tew_632brp_gpio_keys),
- tew_632brp_gpio_keys);
-
- ath79_register_wmac(eeprom, wlan_mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP",
- tew_632brp_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-673gru.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-673gru.c
deleted file mode 100644
index 80a5443c70..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-673gru.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * TRENDnet TEW-673GRU board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/rtl8366.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define TEW673GRU_GPIO_LCD_SCK 0
-#define TEW673GRU_GPIO_LCD_MOSI 1
-#define TEW673GRU_GPIO_LCD_MISO 2
-#define TEW673GRU_GPIO_LCD_CS 6
-
-#define TEW673GRU_GPIO_LED_WPS 9
-
-#define TEW673GRU_GPIO_BTN_RESET 3
-#define TEW673GRU_GPIO_BTN_WPS 8
-
-#define TEW673GRU_GPIO_RTL8366_SDA 5
-#define TEW673GRU_GPIO_RTL8366_SCK 7
-
-#define TEW673GRU_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TEW673GRU_KEYS_DEBOUNCE_INTERVAL (3 * TEW673GRU_KEYS_POLL_INTERVAL)
-
-#define TEW673GRU_CAL0_OFFSET 0x1000
-#define TEW673GRU_CAL1_OFFSET 0x5000
-#define TEW673GRU_MAC0_OFFSET 0xffa0
-#define TEW673GRU_MAC1_OFFSET 0xffb4
-
-#define TEW673GRU_CAL_LOCATION_0 0x1f660000
-#define TEW673GRU_CAL_LOCATION_1 0x1f7f0000
-
-static struct gpio_led tew673gru_leds_gpio[] __initdata = {
- {
- .name = "trendnet:blue:wps",
- .gpio = TEW673GRU_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tew673gru_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW673GRU_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TEW673GRU_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW673GRU_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static struct rtl8366_initval tew673gru_rtl8366s_initvals[] = {
- { .reg = 0x06, .val = 0x0108 },
-};
-
-static struct rtl8366_platform_data tew673gru_rtl8366s_data = {
- .gpio_sda = TEW673GRU_GPIO_RTL8366_SDA,
- .gpio_sck = TEW673GRU_GPIO_RTL8366_SCK,
- .num_initvals = ARRAY_SIZE(tew673gru_rtl8366s_initvals),
- .initvals = tew673gru_rtl8366s_initvals,
-};
-
-static struct platform_device tew673gru_rtl8366s_device = {
- .name = RTL8366S_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &tew673gru_rtl8366s_data,
- }
-};
-
-static struct spi_board_info tew673gru_spi_info[] = {
- {
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 400000,
- .modalias = "spidev",
- .mode = SPI_MODE_2,
- .controller_data = (void *) TEW673GRU_GPIO_LCD_CS,
- },
-};
-
-static struct spi_gpio_platform_data tew673gru_spi_data = {
- .sck = TEW673GRU_GPIO_LCD_SCK,
- .miso = TEW673GRU_GPIO_LCD_MISO,
- .mosi = TEW673GRU_GPIO_LCD_MOSI,
- .num_chipselect = 1,
-};
-
-static struct platform_device tew673gru_spi_device = {
- .name = "spi_gpio",
- .id = 1,
- .dev = {
- .platform_data = &tew673gru_spi_data,
- },
-};
-
-static bool __init tew673gru_is_caldata_valid(u8 *p)
-{
- u16 *magic0, *magic1;
-
- magic0 = (u16 *)(p + TEW673GRU_CAL0_OFFSET);
- magic1 = (u16 *)(p + TEW673GRU_CAL1_OFFSET);
-
- return (*magic0 == 0xa55a && *magic1 == 0xa55a);
-}
-
-static void __init tew673gru_wlan_init(void)
-{
- u8 mac1[ETH_ALEN], mac2[ETH_ALEN];
- u8 *caldata;
-
- caldata = (u8 *) KSEG1ADDR(TEW673GRU_CAL_LOCATION_0);
- if (!tew673gru_is_caldata_valid(caldata)) {
- caldata = (u8 *)KSEG1ADDR(TEW673GRU_CAL_LOCATION_1);
- if (!tew673gru_is_caldata_valid(caldata)) {
- pr_err("no calibration data found\n");
- return;
- }
- }
-
- ath79_parse_ascii_mac(caldata + TEW673GRU_MAC0_OFFSET, mac1);
- ath79_parse_ascii_mac(caldata + TEW673GRU_MAC1_OFFSET, mac2);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 2);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 3);
-
- ap9x_pci_setup_wmac_led_pin(0, 5);
- ap9x_pci_setup_wmac_led_pin(1, 5);
-
- ap94_pci_init(caldata + TEW673GRU_CAL0_OFFSET, mac1,
- caldata + TEW673GRU_CAL1_OFFSET, mac2);
-}
-
-static void __init tew673gru_setup(void)
-{
- tew673gru_wlan_init();
-
- ath79_register_mdio(0, 0x0);
-
- ath79_eth0_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_pll_data.pll_1000 = 0x11110000;
-
- ath79_eth1_data.mii_bus_dev = &tew673gru_rtl8366s_device.dev;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = 0x10;
- ath79_eth1_pll_data.pll_1000 = 0x11110000;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tew673gru_leds_gpio),
- tew673gru_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TEW673GRU_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tew673gru_gpio_keys),
- tew673gru_gpio_keys);
-
- ath79_register_usb();
-
- platform_device_register(&tew673gru_rtl8366s_device);
-
- spi_register_board_info(tew673gru_spi_info,
- ARRAY_SIZE(tew673gru_spi_info));
- platform_device_register(&tew673gru_spi_device);
-}
-
-MIPS_MACHINE(ATH79_MACH_TEW_673GRU, "TEW-673GRU", "TRENDnet TEW-673GRU",
- tew673gru_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-712br.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-712br.c
deleted file mode 100644
index 304b994887..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-712br.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * TRENDnet TEW-712BR board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TEW_712BR_GPIO_BTN_WPS 11
-#define TEW_712BR_GPIO_BTN_RESET 12
-
-#define TEW_712BR_GPIO_LED_LAN1 13
-#define TEW_712BR_GPIO_LED_LAN2 14
-#define TEW_712BR_GPIO_LED_LAN3 15
-#define TEW_712BR_GPIO_LED_LAN4 16
-#define TEW_712BR_GPIO_LED_POWER_GREEN 20
-#define TEW_712BR_GPIO_LED_POWER_ORANGE 27
-#define TEW_712BR_GPIO_LED_WAN_GREEN 17
-#define TEW_712BR_GPIO_LED_WAN_ORANGE 23
-#define TEW_712BR_GPIO_LED_WLAN 0
-#define TEW_712BR_GPIO_LED_WPS 26
-
-#define TEW_712BR_GPIO_WAN_LED_ENABLE 1
-
-#define TEW_712BR_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TEW_712BR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_712BR_KEYS_POLL_INTERVAL)
-
-#define TEW_712BR_ART_ADDRESS 0x1f010000
-#define TEW_712BR_CALDATA_OFFSET 0x1000
-
-#define TEW_712BR_MAC_PART_ADDRESS 0x1f020000
-#define TEW_712BR_LAN_MAC_OFFSET 0x04
-#define TEW_712BR_WAN_MAC_OFFSET 0x16
-
-static struct gpio_led tew_712br_leds_gpio[] __initdata = {
- {
- .name = "trendnet:green:lan1",
- .gpio = TEW_712BR_GPIO_LED_LAN1,
- .active_low = 0,
- }, {
- .name = "trendnet:green:lan2",
- .gpio = TEW_712BR_GPIO_LED_LAN2,
- .active_low = 0,
- }, {
- .name = "trendnet:green:lan3",
- .gpio = TEW_712BR_GPIO_LED_LAN3,
- .active_low = 0,
- }, {
- .name = "trendnet:green:lan4",
- .gpio = TEW_712BR_GPIO_LED_LAN4,
- .active_low = 0,
- }, {
- .name = "trendnet:blue:wps",
- .gpio = TEW_712BR_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "trendnet:green:power",
- .gpio = TEW_712BR_GPIO_LED_POWER_GREEN,
- .active_low = 0,
- }, {
- .name = "trendnet:orange:power",
- .gpio = TEW_712BR_GPIO_LED_POWER_ORANGE,
- .active_low = 0,
- }, {
- .name = "trendnet:green:wan",
- .gpio = TEW_712BR_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "trendnet:orange:wan",
- .gpio = TEW_712BR_GPIO_LED_WAN_ORANGE,
- .active_low = 0,
- }, {
- .name = "trendnet:green:wlan",
- .gpio = TEW_712BR_GPIO_LED_WLAN,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button tew_712br_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TEW_712BR_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_712BR_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TEW_712BR_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_712BR_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init tew_712br_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(TEW_712BR_ART_ADDRESS);
- u8 *mac = (u8 *) KSEG1ADDR(TEW_712BR_MAC_PART_ADDRESS);
- u8 lan_mac[ETH_ALEN];
- u8 wan_mac[ETH_ALEN];
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- gpio_request_one(TEW_712BR_GPIO_WAN_LED_ENABLE,
- GPIOF_OUT_INIT_LOW, "WAN LED enable");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_712br_leds_gpio),
- tew_712br_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TEW_712BR_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tew_712br_gpio_keys),
- tew_712br_gpio_keys);
-
- ath79_register_m25p80(NULL);
-
- ath79_parse_ascii_mac(mac + TEW_712BR_LAN_MAC_OFFSET, lan_mac);
- ath79_parse_ascii_mac(mac + TEW_712BR_WAN_MAC_OFFSET, wan_mac);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_register_wmac(art + TEW_712BR_CALDATA_OFFSET, wan_mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TEW_712BR, "TEW-712BR",
- "TRENDnet TEW-712BR", tew_712br_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-732br.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-732br.c
deleted file mode 100644
index 1f26f6f4b0..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-732br.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * TRENDnet TEW-732BR board support
- *
- * Copyright (C) 2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TEW_732BR_GPIO_BTN_WPS 16
-#define TEW_732BR_GPIO_BTN_RESET 17
-
-#define TEW_732BR_GPIO_LED_POWER_GREEN 4
-#define TEW_732BR_GPIO_LED_POWER_AMBER 14
-#define TEW_732BR_GPIO_LED_PLANET_GREEN 12
-#define TEW_732BR_GPIO_LED_PLANET_AMBER 22
-
-#define TEW_732BR_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TEW_732BR_KEYS_DEBOUNCE_INTERVAL (3 * TEW_732BR_KEYS_POLL_INTERVAL)
-
-#define TEW_732BR_ART_ADDRESS 0x1fff0000
-#define TEW_732BR_CALDATA_OFFSET 0x1000
-#define TEW_732BR_LAN_MAC_OFFSET 0xffa0
-#define TEW_732BR_WAN_MAC_OFFSET 0xffb4
-
-static struct gpio_led tew_732br_leds_gpio[] __initdata = {
- {
- .name = "trendnet:green:power",
- .gpio = TEW_732BR_GPIO_LED_POWER_GREEN,
- .active_low = 0,
- },
- {
- .name = "trendnet:amber:power",
- .gpio = TEW_732BR_GPIO_LED_POWER_AMBER,
- .active_low = 0,
- },
- {
- .name = "trendnet:green:wan",
- .gpio = TEW_732BR_GPIO_LED_PLANET_GREEN,
- .active_low = 1,
- },
- {
- .name = "trendnet:amber:wan",
- .gpio = TEW_732BR_GPIO_LED_PLANET_AMBER,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button tew_732br_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TEW_732BR_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_732BR_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TEW_732BR_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_732BR_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static void __init tew_732br_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(TEW_732BR_ART_ADDRESS);
- u8 lan_mac[ETH_ALEN];
- u8 wan_mac[ETH_ALEN];
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_732br_leds_gpio),
- tew_732br_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TEW_732BR_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tew_732br_gpio_keys),
- tew_732br_gpio_keys);
-
- ath79_register_m25p80(NULL);
-
- ath79_parse_ascii_mac(art + TEW_732BR_LAN_MAC_OFFSET, lan_mac);
- ath79_parse_ascii_mac(art + TEW_732BR_WAN_MAC_OFFSET, wan_mac);
-
- ath79_register_wmac(art + TEW_732BR_CALDATA_OFFSET, lan_mac);
-
- ath79_register_mdio(1, 0x0);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-
- /* LAN: GMAC1 is connected to the internal switch */
- ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-
- ath79_register_eth(1);
-
- /* WAN: GMAC0 is connected to the PHY4 of the internal switch */
- ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
-
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_TEW_732BR, "TEW-732BR", "TRENDnet TEW-732BR",
- tew_732br_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-823dru.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-823dru.c
deleted file mode 100644
index e631828a65..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tew-823dru.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * TRENDnet TEW-823DRU board support
- *
- * Copyright (C) 2015 Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
- * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TEW_823DRU_GPIO_LED_POWER_ORANGE 14
-#define TEW_823DRU_GPIO_LED_POWER_GREEN 19
-#define TEW_823DRU_GPIO_LED_PLANET_GREEN 22
-#define TEW_823DRU_GPIO_LED_PLANET_ORANGE 23
-
-#define TEW_823DRU_GPIO_BTN_WPS 16
-#define TEW_823DRU_GPIO_BTN_RESET 17
-
-#define TEW_823DRU_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TEW_823DRU_KEYS_DEBOUNCE_INTERVAL \
- (3 * TEW_823DRU_KEYS_POLL_INTERVAL)
-
-#define TEW_823DRU_WMAC_CALDATA_OFFSET 0x1000
-
-#define TEW_823DRU_LAN_MAC_OFFSET 0x04
-#define TEW_823DRU_WAN_MAC_OFFSET 0x18
-
-static struct gpio_led tew_823dru_leds_gpio[] __initdata = {
- {
- .name = "trendnet:green:power",
- .gpio = TEW_823DRU_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- },
- {
- .name = "trendnet:orange:power",
- .gpio = TEW_823DRU_GPIO_LED_POWER_ORANGE,
- .active_low = 1,
- },
- {
- .name = "trendnet:green:planet",
- .gpio = TEW_823DRU_GPIO_LED_PLANET_GREEN,
- .active_low = 1,
- },
- {
- .name = "trendnet:orange:planet",
- .gpio = TEW_823DRU_GPIO_LED_PLANET_ORANGE,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tew_823dru_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TEW_823DRU_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_823DRU_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TEW_823DRU_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TEW_823DRU_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
-static struct ar8327_pad_cfg tew_823dru_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
-static struct ar8327_pad_cfg tew_823dru_ar8327_pad6_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data tew_823dru_ar8327_data = {
- .pad0_cfg = &tew_823dru_ar8327_pad0_cfg,
- .pad6_cfg = &tew_823dru_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info tew_823dru_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &tew_823dru_ar8327_data,
- },
-};
-
-static void __init tew_823dru_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 lan_mac[ETH_ALEN];
- u8 wan_mac[ETH_ALEN];
-
- ath79_parse_ascii_mac(mac + TEW_823DRU_LAN_MAC_OFFSET, lan_mac);
- ath79_parse_ascii_mac(mac + TEW_823DRU_WAN_MAC_OFFSET, wan_mac);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tew_823dru_leds_gpio),
- tew_823dru_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TEW_823DRU_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tew_823dru_gpio_keys),
- tew_823dru_gpio_keys);
-
- ath79_register_wmac(art + TEW_823DRU_WMAC_CALDATA_OFFSET, lan_mac);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0);
- ath79_init_mac(ath79_eth0_data.mac_addr, wan_mac, 0);
-
-
- mdiobus_register_board_info(tew_823dru_mdio0_info,
- ARRAY_SIZE(tew_823dru_mdio0_info));
- ath79_register_mdio(0, 0x0);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x56000000;
-
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- ath79_register_eth(1);
-
- ath79_register_usb();
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_TEW_823DRU, "TEW-823DRU", "TRENDnet TEW-823DRU",
- tew_823dru_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr11u.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr11u.c
deleted file mode 100644
index 74ccf639e0..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr11u.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * TP-LINK TL-MR11U/TL-MR3040 board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_MR11U_GPIO_LED_3G 27
-#define TL_MR11U_GPIO_LED_WLAN 26
-#define TL_MR11U_GPIO_LED_LAN 17
-
-#define TL_MR11U_GPIO_BTN_WPS 20
-#define TL_MR11U_GPIO_BTN_RESET 11
-
-#define TL_MR11U_GPIO_USB_POWER 8
-#define TL_MR3040_GPIO_USB_POWER 18
-
-#define TL_MR3040_V2_GPIO_BTN_SW1 19
-#define TL_MR3040_V2_GPIO_BTN_SW2 20
-
-#define TL_MR11U_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_MR11U_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR11U_KEYS_POLL_INTERVAL)
-
-static const char *tl_mr11u_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_mr11u_flash_data = {
- .part_probes = tl_mr11u_part_probes,
-};
-
-static struct gpio_led tl_mr11u_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:3g",
- .gpio = TL_MR11U_GPIO_LED_3G,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wlan",
- .gpio = TL_MR11U_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:lan",
- .gpio = TL_MR11U_GPIO_LED_LAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_mr11u_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR11U_GPIO_BTN_RESET,
- .active_low = 0,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR11U_GPIO_BTN_WPS,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button tl_mr3040_v2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR11U_GPIO_BTN_RESET,
- .active_low = 0,
- },
- {
- .desc = "sw1",
- .type = EV_SW,
- .code = BTN_0,
- .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3040_V2_GPIO_BTN_SW1,
- .active_low = 0,
- },
- {
- .desc = "sw2",
- .type = EV_SW,
- .code = BTN_1,
- .debounce_interval = TL_MR11U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3040_V2_GPIO_BTN_SW2,
- .active_low = 0,
- }
-};
-
-static void __init common_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* Disable hardware control LAN1 and LAN2 LEDs, enabling GPIO14 and GPIO15 */
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_m25p80(&tl_mr11u_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr11u_leds_gpio),
- tl_mr11u_leds_gpio);
-
- ath79_register_usb();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, mac);
-}
-
-static void __init tl_mr11u_setup(void)
-{
- common_setup();
-
- ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_mr11u_gpio_keys),
- tl_mr11u_gpio_keys);
- gpio_request_one(TL_MR11U_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR11U, "TL-MR11U", "TP-LINK TL-MR11U",
- tl_mr11u_setup);
-
-static void __init tl_mr3040_setup(void)
-{
- common_setup();
-
- ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
- 1, tl_mr11u_gpio_keys);
- gpio_request_one(TL_MR3040_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR3040, "TL-MR3040", "TP-LINK TL-MR3040",
- tl_mr3040_setup);
-
-static void __init tl_mr3040_v2_setup(void)
-{
- common_setup();
-
- ath79_register_gpio_keys_polled(-1, TL_MR11U_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_mr3040_v2_gpio_keys),
- tl_mr3040_v2_gpio_keys);
- gpio_request_one(TL_MR3040_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR3040_V2, "TL-MR3040-v2", "TP-LINK TL-MR3040 v2",
- tl_mr3040_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c
deleted file mode 100644
index 84b6937849..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr13u.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * TP-LINK TL-MR13U board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_MR13U_GPIO_LED_SYSTEM 27
-
-#define TL_MR13U_GPIO_BTN_RESET 11
-#define TL_MR13U_GPIO_BTN_SW1 6
-#define TL_MR13U_GPIO_BTN_SW2 7
-
-#define TL_MR13U_GPIO_USB_POWER 18
-
-#define TL_MR13U_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_MR13U_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR13U_KEYS_POLL_INTERVAL)
-
-static const char *tl_mr13u_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_mr13u_flash_data = {
- .part_probes = tl_mr13u_part_probes,
-};
-
-static struct gpio_led tl_mr13u_leds_gpio[] __initdata = {
- {
- .name = "tp-link:blue:system",
- .gpio = TL_MR13U_GPIO_LED_SYSTEM,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button tl_mr13u_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR13U_GPIO_BTN_RESET,
- .active_low = 0,
- },
- {
- .desc = "sw1",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR13U_GPIO_BTN_SW1,
- .active_low = 0,
- },
- {
- .desc = "sw2",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = TL_MR13U_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR13U_GPIO_BTN_SW2,
- .active_low = 0,
- },
-};
-
-static void __init tl_mr13u_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_m25p80(&tl_mr13u_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr13u_leds_gpio),
- tl_mr13u_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TL_MR13U_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_mr13u_gpio_keys),
- tl_mr13u_gpio_keys);
-
- gpio_request_one(TL_MR13U_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR13U, "TL-MR13U", "TP-LINK TL-MR13U v1",
- tl_mr13u_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c
deleted file mode 100644
index e3b4087eff..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * TP-LINK TL-MR3020 board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_MR3020_GPIO_LED_3G 27
-#define TL_MR3020_GPIO_LED_WLAN 0
-#define TL_MR3020_GPIO_LED_LAN 17
-#define TL_MR3020_GPIO_LED_WPS 26
-
-#define TL_MR3020_GPIO_BTN_WPS 11
-#define TL_MR3020_GPIO_BTN_SW1 18
-#define TL_MR3020_GPIO_BTN_SW2 20
-
-#define TL_MR3020_GPIO_USB_POWER 8
-
-#define TL_MR3020_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_MR3020_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3020_KEYS_POLL_INTERVAL)
-
-static const char *tl_mr3020_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_mr3020_flash_data = {
- .part_probes = tl_mr3020_part_probes,
-};
-
-static struct gpio_led tl_mr3020_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:3g",
- .gpio = TL_MR3020_GPIO_LED_3G,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wlan",
- .gpio = TL_MR3020_GPIO_LED_WLAN,
- .active_low = 0,
- },
- {
- .name = "tp-link:green:lan",
- .gpio = TL_MR3020_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wps",
- .gpio = TL_MR3020_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3020_GPIO_BTN_WPS,
- .active_low = 0,
- },
- {
- .desc = "sw1",
- .type = EV_SW,
- .code = BTN_0,
- .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3020_GPIO_BTN_SW1,
- .active_low = 0,
- },
- {
- .desc = "sw2",
- .type = EV_SW,
- .code = BTN_1,
- .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3020_GPIO_BTN_SW2,
- .active_low = 0,
- }
-};
-
-static void __init tl_mr3020_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_m25p80(&tl_mr3020_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3020_leds_gpio),
- tl_mr3020_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TL_MR3020_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_mr3020_gpio_keys),
- tl_mr3020_gpio_keys);
-
- gpio_request_one(TL_MR3020_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR3020, "TL-MR3020", "TP-LINK TL-MR3020",
- tl_mr3020_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3x20.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3x20.c
deleted file mode 100644
index 5924ac5048..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3x20.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * TP-LINK TL-MR3220/3420 board support
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define TL_MR3X20_GPIO_LED_QSS 0
-#define TL_MR3X20_GPIO_LED_SYSTEM 1
-#define TL_MR3X20_GPIO_LED_3G 8
-
-#define TL_MR3X20_GPIO_BTN_RESET 11
-#define TL_MR3X20_GPIO_BTN_QSS 12
-
-#define TL_MR3X20_GPIO_USB_POWER 6
-
-#define TL_MR3X20_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_MR3X20_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR3X20_KEYS_POLL_INTERVAL)
-
-static const char *tl_mr3x20_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_mr3x20_flash_data = {
- .part_probes = tl_mr3x20_part_probes,
-};
-
-static struct gpio_led tl_mr3x20_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:system",
- .gpio = TL_MR3X20_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_MR3X20_GPIO_LED_QSS,
- .active_low = 1,
- }, {
- .name = "tp-link:green:3g",
- .gpio = TL_MR3X20_GPIO_LED_3G,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_mr3x20_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3X20_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_MR3X20_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3X20_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static void __init tl_ap99_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_mr3x20_flash_data);
-
- ath79_register_gpio_keys_polled(-1, TL_MR3X20_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_mr3x20_gpio_keys),
- tl_mr3x20_gpio_keys);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
- /* WAN port */
- ath79_register_eth(0);
-
- ap91_pci_init(ee, mac);
-}
-
-static void __init tl_mr3x20_usb_setup(void)
-{
- /* enable power for the USB port */
- gpio_request_one(TL_MR3X20_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-}
-
-static void __init tl_mr3220_setup(void)
-{
- tl_ap99_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
- tl_mr3x20_leds_gpio);
- ap9x_pci_setup_wmac_led_pin(0, 1);
- tl_mr3x20_usb_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR3220, "TL-MR3220", "TP-LINK TL-MR3220",
- tl_mr3220_setup);
-
-static void __init tl_mr3420_setup(void)
-{
- tl_ap99_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio),
- tl_mr3x20_leds_gpio);
- ap9x_pci_setup_wmac_led_pin(0, 0);
- tl_mr3x20_usb_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR3420, "TL-MR3420", "TP-LINK TL-MR3420",
- tl_mr3420_setup);
-
-static void __init tl_wr841n_v7_setup(void)
-{
- tl_ap99_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_mr3x20_leds_gpio) - 1,
- tl_mr3x20_leds_gpio);
- ap9x_pci_setup_wmac_led_pin(0, 0);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR841N_V7, "TL-WR841N-v7",
- "TP-LINK TL-WR841N/ND v7", tl_wr841n_v7_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c
deleted file mode 100644
index be49c89cab..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr6400.c
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * TP-LINK TL-MR6400 board support
- *
- * Copyright (C) 2017 Filip Moc <lede@moc6.cz>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- * * The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * DAMAGES ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_MR6400_GPIO_LTE_POWER 4
-#define TL_MR6400_GPIO_BTN_RESET 12 /* SW2 */
-#define TL_MR6400_GPIO_BTN_RFKILL 14 /* SW3 */
-#define TL_MR6400_GPIO_LED_WAN 0 /* D12 */
-#define TL_MR6400_GPIO_LED_4G 1 /* D11 */
-#define TL_MR6400_GPIO_LED_WPS 3 /* D5 */
-#define TL_MR6400_GPIO_LED_WLAN 11 /* D3 */
-#define TL_MR6400_GPIO_LED_POWER 13 /* D2 */
-#define TL_MR6400_GPIO_LED_LAN 16 /* D4 */
-
-#define TL_MR6400_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_MR6400_KEYS_DEBOUNCE_INTERVAL (3 * TL_MR6400_KEYS_POLL_INTERVAL)
-
-#define TL_MR6400_WMAC_CALDATA_OFFSET 0x1000
-
-static const char *tl_mr6400_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_mr6400_flash_data = {
- .part_probes = tl_mr6400_part_probes,
- .type = "w25q64",
-};
-
-static struct gpio_led tl_mr6400_leds_gpio[] __initdata = {
- {
- .name = "tp-link:white:wan",
- .gpio = TL_MR6400_GPIO_LED_WAN,
- .active_low = 0,
- },
- {
- .name = "tp-link:white:4g",
- .gpio = TL_MR6400_GPIO_LED_4G,
- .active_low = 0,
- },
- {
- .name = "tp-link:white:wps",
- .gpio = TL_MR6400_GPIO_LED_WPS,
- .active_low = 0,
- },
- {
- .name = "tp-link:white:wlan",
- .gpio = TL_MR6400_GPIO_LED_WLAN,
- .active_low = 0,
- },
- {
- .name = "tp-link:white:power",
- .gpio = TL_MR6400_GPIO_LED_POWER,
- .active_low = 0,
- },
- {
- .name = "tp-link:white:lan",
- .gpio = TL_MR6400_GPIO_LED_LAN,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button tl_mr6400_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR6400_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "rfkill",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = TL_MR6400_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR6400_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
-};
-
-static void __init tl_mr6400_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(&tl_mr6400_flash_data);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN1, LAN2, LAN3 */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask |= BIT(0);
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
- ath79_register_eth(1);
-
- /* LAN4 / WAN */
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- ath79_register_wmac(art + TL_MR6400_WMAC_CALDATA_OFFSET, mac);
-
- ath79_register_leds_gpio(-1,
- ARRAY_SIZE(tl_mr6400_leds_gpio),
- tl_mr6400_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1,
- TL_MR6400_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_mr6400_gpio_keys),
- tl_mr6400_gpio_keys);
-
- gpio_request_one(TL_MR6400_GPIO_LTE_POWER,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW,
- "LTE power");
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR6400, "TL-MR6400", "TP-LINK TL-MR6400",
- tl_mr6400_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa701nd-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa701nd-v2.c
deleted file mode 100644
index aab92b30d4..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa701nd-v2.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * TP-LINK TL-WA701ND v2 board support
- *
- * Copyright (C) 2015 Luigi Tarenga <luigi.tarenga@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WA701NDV2_GPIO_LED_WLAN 0
-#define TL_WA701NDV2_GPIO_LED_QSS 1
-#define TL_WA701NDV2_GPIO_LED_LAN 17
-#define TL_WA701NDV2_GPIO_LED_SYSTEM 27
-
-#define TL_WA701NDV2_GPIO_BTN_RESET 11
-#define TL_WA701NDV2_GPIO_BTN_QSS 26
-
-#define TL_WA701NDV2_GPIO_USB_POWER 8
-
-#define TL_WA701NDV2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WA701NDV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA701NDV2_KEYS_POLL_INTERVAL)
-
-static const char *tl_wa701ndv2_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wa701ndv2_flash_data = {
- .part_probes = tl_wa701ndv2_part_probes,
-};
-
-static struct gpio_led tl_wa701ndv2_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:wlan",
- .gpio = TL_WA701NDV2_GPIO_LED_WLAN,
- .active_low = 0,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WA701NDV2_GPIO_LED_QSS,
- .active_low = 0,
- }, {
- .name = "tp-link:green:lan",
- .gpio = TL_WA701NDV2_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WA701NDV2_GPIO_LED_SYSTEM,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_wa701ndv2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WA701NDV2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA701NDV2_GPIO_BTN_RESET,
- .active_low = 0,
- } , {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WA701NDV2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA701NDV2_GPIO_BTN_QSS,
- .active_low = 0,
- }
-
-};
-
-static void __init tl_wa701ndv2_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa701ndv2_leds_gpio),
- tl_wa701ndv2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WA701NDV2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wa701ndv2_gpio_keys),
- tl_wa701ndv2_gpio_keys);
-
- gpio_request_one(TL_WA701NDV2_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_register_m25p80(&tl_wa701ndv2_flash_data);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- /* ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); */
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA701ND_V2, "TL-WA701ND-v2",
- "TP-LINK TL-WA701ND v2", tl_wa701ndv2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa7210n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa7210n-v2.c
deleted file mode 100644
index 276353a6c3..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa7210n-v2.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * TP-LINK TL-WA7210N v2.1 board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2014 Nicolas Braud-Santoni <nicolas@braud-santoni.eu>
- * Copyright (C) 2014 Alexander List <alex@graz.funkfeuer.at>
- * Copyright (C) 2015 Hendrik Frenzel <hfrenzel@scunc.net>
- *
- * rebased on TL-WA7510Nv1 support,
- * Copyright (C) 2012 Stefan Helmert <helst_listen@aol.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-dsa.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#include "common.h"
-
-#define TL_WA7210N_V2_GPIO_BTN_RESET 11
-#define TL_WA7210N_V2_KEYS_POLL_INT 20
-#define TL_WA7210N_V2_KEYS_DEBOUNCE_INT (3 * TL_WA7210N_V2_KEYS_POLL_INT)
-
-#define TL_WA7210N_V2_GPIO_LED_LAN 17
-#define TL_WA7210N_V2_GPIO_LED_SIG1 0
-#define TL_WA7210N_V2_GPIO_LED_SIG2 1
-#define TL_WA7210N_V2_GPIO_LED_SIG3 27
-#define TL_WA7210N_V2_GPIO_LED_SIG4 26
-
-#define TL_WA7210N_V2_GPIO_LNA_EN 28
-
-static const char *tl_wa7210n_v2_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct gpio_keys_button tl_wa7210n_v2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WA7210N_V2_KEYS_DEBOUNCE_INT,
- .gpio = TL_WA7210N_V2_GPIO_BTN_RESET,
- .active_low = 0,
- },
-};
-
-static struct gpio_led tl_wa7210n_v2_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan",
- .gpio = TL_WA7210N_V2_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:signal1",
- .gpio = TL_WA7210N_V2_GPIO_LED_SIG1,
- .active_low = 0,
- }, {
- .name = "tp-link:green:signal2",
- .gpio = TL_WA7210N_V2_GPIO_LED_SIG2,
- .active_low = 0,
- }, {
- .name = "tp-link:green:signal3",
- .gpio = TL_WA7210N_V2_GPIO_LED_SIG3,
- .active_low = 1,
- }, {
- .name = "tp-link:green:signal4",
- .gpio = TL_WA7210N_V2_GPIO_LED_SIG4,
- .active_low = 1,
- },
-};
-
-static struct flash_platform_data tl_wa7210n_v2_flash_data = {
- .part_probes = tl_wa7210n_v2_part_probes,
-};
-
-static void __init tl_wa7210n_v2_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_gpio_keys_polled(-1, TL_WA7210N_V2_KEYS_POLL_INT,
- ARRAY_SIZE(tl_wa7210n_v2_gpio_keys),
- tl_wa7210n_v2_gpio_keys);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa7210n_v2_leds_gpio),
- tl_wa7210n_v2_leds_gpio);
-
- ath79_gpio_function_enable(TL_WA7210N_V2_GPIO_LNA_EN);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_register_wmac(ee, mac);
-
- ath79_register_m25p80(&tl_wa7210n_v2_flash_data);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA7210N_V2, "TL-WA7210N-v2", "TP-LINK TL-WA7210N v2",
- tl_wa7210n_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c
deleted file mode 100644
index 1637382192..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa801nd-v3.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * TP-LINK TL-WA801ND v3 adapted from TP-LINK TL-WR841N/ND v9
- * TP-LINK TL-WA801ND v4
- *
- * Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
- * Copyright (C) 2016 Tiziano Bacocco <tizbac2@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WA801NDV3_GPIO_LED_WLAN 12
-#define TL_WA801NDV3_GPIO_LED_SYSTEM 13
-#define TL_WA801NDV3_GPIO_LED_SECURITY_RED 11
-#define TL_WA801NDV3_GPIO_LED_SECURITY_GREEN 15
-#define TL_WA801NDV3_GPIO_LED_LAN 3
-
-#define TL_WA801NDV3_GPIO_BTN_RESET 2
-#define TL_WA801NDV3_GPIO_BTN_WIFI 1
-
-#define TL_WA801NDV3_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WA801NDV3_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA801NDV3_KEYS_POLL_INTERVAL)
-
-static const char *tl_wa801n_v3_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wa801n_v3_flash_data = {
- .part_probes = tl_wa801n_v3_part_probes,
-};
-
-static struct gpio_led tl_wa801n_v3_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:system",
- .gpio = TL_WA801NDV3_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan",
- .gpio = TL_WA801NDV3_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WA801NDV3_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "tp-link:red:security",
- .gpio = TL_WA801NDV3_GPIO_LED_SECURITY_RED,
- .active_low = 0,
- }, {
- .name = "tp-link:green:security",
- .gpio = TL_WA801NDV3_GPIO_LED_SECURITY_GREEN,
- .active_low = 0,
- }
-
-};
-
-static struct gpio_keys_button tl_wa801n_v3_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WA801NDV3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA801NDV3_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "WIFI button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = TL_WA801NDV3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA801NDV3_GPIO_BTN_WIFI,
- .active_low = 1,
- }
-};
-
-
-static void __init tl_ap143_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(&tl_wa801n_v3_flash_data);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- ath79_init_mac(tmpmac, mac, 0);
- ath79_register_wmac(ee, tmpmac);
-}
-
-static void __init tl_wa801n_v3_setup(void)
-{
- tl_ap143_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801n_v3_leds_gpio),
- tl_wa801n_v3_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TL_WA801NDV3_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wa801n_v3_gpio_keys),
- tl_wa801n_v3_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA801ND_V3, "TL-WA801ND-v3", "TP-LINK TL-WA801ND v3",
- tl_wa801n_v3_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c
deleted file mode 100644
index 1c74fed98e..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa830re-v2.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * TP-LINK TL-WA830RE v2 board support
- *
- * Copyright (C) 2014 Fredrik Jonson <fredrik@famjonson.se>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WA830REV2_GPIO_LED_WLAN 13
-#define TL_WA830REV2_GPIO_LED_QSS 15
-#define TL_WA830REV2_GPIO_LED_LAN 18
-#define TL_WA830REV2_GPIO_LED_SYSTEM 14
-
-#define TL_WA830REV2_GPIO_BTN_RESET 17
-#define TL_WA830REV2_GPIO_SW_RFKILL 16 /* WPS for MR3420 v2 */
-
-#define TL_WA830REV2_GPIO_USB_POWER 4
-
-#define TL_WA830REV2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA830REV2_KEYS_POLL_INTERVAL)
-
-static const char *tl_wa830re_v2_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wa830re_v2_flash_data = {
- .part_probes = tl_wa830re_v2_part_probes,
-};
-
-static struct gpio_led tl_wa830re_v2_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:qss",
- .gpio = TL_WA830REV2_GPIO_LED_QSS,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WA830REV2_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan",
- .gpio = TL_WA830REV2_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WA830REV2_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wa830re_v2_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA830REV2_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "RFKILL switch",
- .type = EV_SW,
- .code = KEY_RFKILL,
- .debounce_interval = TL_WA830REV2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA830REV2_GPIO_SW_RFKILL,
- .active_low = 0,
- }
-};
-
-static void __init tl_ap123_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* Disable JTAG, enabling GPIOs 0-3 */
- /* Configure OBS4 line, for GPIO 4*/
- ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
- AR934X_GPIO_FUNC_CLK_OBS4_EN);
-
- /* config gpio4 as normal gpio function */
- ath79_gpio_output_select(TL_WA830REV2_GPIO_USB_POWER,
- AR934X_GPIO_OUT_GPIO);
-
- ath79_register_m25p80(&tl_wa830re_v2_flash_data);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
-
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- /* GMAC0 is connected to the PHY0 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, mac);
-}
-
-static void __init tl_wa830re_v2_setup(void)
-{
- tl_ap123_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa830re_v2_leds_gpio) - 1,
- tl_wa830re_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TL_WA830REV2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wa830re_v2_gpio_keys),
- tl_wa830re_v2_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA830RE_V2, "TL-WA830RE-v2", "TP-LINK TL-WA830RE v2",
- tl_wa830re_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v2.c
deleted file mode 100644
index b4fb2a9f91..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v2.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * TP-LINK TL-WA901N/ND v2 board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
- * Copyright (C) 2011 Jonathan Bennett <jbscience87@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WA901ND_V2_GPIO_LED_QSS 4
-#define TL_WA901ND_V2_GPIO_LED_SYSTEM 2
-#define TL_WA901ND_V2_GPIO_LED_WLAN 9
-
-#define TL_WA901ND_V2_GPIO_BTN_RESET 3
-#define TL_WA901ND_V2_GPIO_BTN_QSS 7
-
-#define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \
- (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL)
-
-static const char *tl_wa901nd_v2_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wa901nd_v2_flash_data = {
- .part_probes = tl_wa901nd_v2_part_probes,
-};
-
-static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:system",
- .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WA901ND_V2_GPIO_LED_QSS,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WA901ND_V2_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA901ND_V2_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA901ND_V2_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static void __init tl_wa901nd_v2_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = 0x00001000;
- ath79_register_mdio(0, 0x0);
-
- ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
- AR71XX_RESET_GE0_PHY;
- ath79_register_eth(0);
-
- ath79_register_m25p80(&tl_wa901nd_v2_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio),
- tl_wa901nd_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wa901nd_v2_gpio_keys),
- tl_wa901nd_v2_gpio_keys);
-
- ath79_register_wmac(eeprom, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V2, "TL-WA901ND-v2",
- "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v4.c
deleted file mode 100644
index ffbcd6fe42..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd-v4.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * TP-LINK TL-WA901ND v4, v5 board
- *
- * Copyright (C) 2015 Matthias Schiffer <mschiffer@universe-factory.net>
- * Copyright (C) 2016 Tiziano Bacocco <tizbac2@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-
-#define TL_WA901ND_V4_GPIO_LED_QSS 3
-#define TL_WA901ND_V4_GPIO_LED_LAN 7
-#define TL_WA901ND_V4_GPIO_LED_WLAN 8
-#define TL_WA901ND_V4_GPIO_LED_SYSTEM 18
-
-#define TL_WA901ND_V4_GPIO_BTN_RESET 1
-
-#define TL_WA901ND_V4_KEYS_POLL_INTERVAL 20
-#define TL_WA901ND_V4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_V4_KEYS_POLL_INTERVAL)
-
-
-static struct gpio_led TL_WA901ND_V4_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:qss",
- .gpio = TL_WA901ND_V4_GPIO_LED_QSS,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:lan",
- .gpio = TL_WA901ND_V4_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wlan",
- .gpio = TL_WA901ND_V4_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:system",
- .gpio = TL_WA901ND_V4_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button TL_WA901ND_V4_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WA901ND_V4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA901ND_V4_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-
-static const char *tl_wa901nd_v4_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wa901nd_v4_flash_data = {
- .part_probes = tl_wa901nd_v4_part_probes,
-};
-
-
-static void __init TL_WA901ND_V4_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_wa901nd_v4_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(TL_WA901ND_V4_leds_gpio),
- TL_WA901ND_V4_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WA901ND_V4_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(TL_WA901ND_V4_gpio_keys),
- TL_WA901ND_V4_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_switch_data.phy4_mii_en = 1;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, mac);
-
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V4, "TL-WA901ND-v4", "TP-LINK TL-WA901ND v4",
- TL_WA901ND_V4_setup);
-
-MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V5, "TL-WA901ND-v5", "TP-LINK TL-WA901ND v5",
- TL_WA901ND_V4_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd.c
deleted file mode 100644
index 957b92cba6..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wa901nd.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * TP-LINK TL-WA901N/ND v1, TL-WA7510N v1 board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
- * Copyright (C) 2012 Stefan Helmert <helst_listen@aol.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define TL_WA901ND_GPIO_LED_QSS 0
-#define TL_WA901ND_GPIO_LED_SYSTEM 1
-#define TL_WA901ND_GPIO_LED_LAN 13
-
-#define TL_WA901ND_GPIO_BTN_RESET 11
-#define TL_WA901ND_GPIO_BTN_QSS 12
-
-#define TL_WA901ND_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WA901ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WA901ND_KEYS_POLL_INTERVAL)
-
-static const char *tl_wa901nd_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wa901nd_flash_data = {
- .part_probes = tl_wa901nd_part_probes,
-};
-
-static struct gpio_led tl_wa901nd_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan",
- .gpio = TL_WA901ND_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WA901ND_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WA901ND_GPIO_LED_QSS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_wa901nd_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA901ND_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WA901ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA901ND_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static void __init common_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-
- /*
- * ath79_eth0 would be the WAN port, but is not connected.
- * ath79_eth1 connects to the internal switch chip, however
- * we have a single LAN port only.
- */
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(&tl_wa901nd_flash_data);
-}
-
-static void __init tl_wa901nd_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_leds_gpio),
- tl_wa901nd_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WA901ND_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wa901nd_gpio_keys),
- tl_wa901nd_gpio_keys);
-
- ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA901ND, "TL-WA901ND", "TP-LINK TL-WA901ND",
- tl_wa901nd_setup);
-
-static void __init tl_wa7510n_v1_setup(void)
-{
- common_setup();
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA7510N_V1, "TL-WA7510N", "TP-LINK TL-WA7510N v1",
- tl_wa7510n_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c
deleted file mode 100644
index 955628fecb..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wax50re.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * Support for TP-Link boards:
- * - TL-WA750RE v1
- * - TL-WA801ND v2
- * - TL-WA850RE v1/v2
- * - TL-WA855RE v1
- * - TL-WA901ND v3
- *
- * Copyright (C) 2013 Martijn Zilverschoon <thefriedzombie@gmail.com>
- * Copyright (C) 2013 Jiri Pirko <jiri@resnulli.us>
- * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com>
- * Copyright (C) 2017 Federico Cappon <dududede371@gmail.com>
- * Copyright (C) 2017 Nicolò Veronese <nicveronese@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WAX50RE_GPIO_LED_LAN 20
-#define TL_WAX50RE_GPIO_LED_WLAN 13
-#define TL_WAX50RE_GPIO_LED_RE 15
-#define TL_WAX50RE_GPIO_LED_SIGNAL1 0
-#define TL_WAX50RE_GPIO_LED_SIGNAL2 1
-#define TL_WAX50RE_GPIO_LED_SIGNAL3 2
-#define TL_WAX50RE_GPIO_LED_SIGNAL4 3
-#define TL_WAX50RE_GPIO_LED_SIGNAL5 4
-
-#define TL_WA850RE_V2_GPIO_LED_LAN 14
-#define TL_WA850RE_V2_GPIO_LED_RE 12
-#define TL_WA850RE_V2_GPIO_LED_SIGNAL1 0
-#define TL_WA850RE_V2_GPIO_LED_SIGNAL2 1
-#define TL_WA850RE_V2_GPIO_LED_SIGNAL3 2
-#define TL_WA850RE_V2_GPIO_LED_SIGNAL4 3
-#define TL_WA850RE_V2_GPIO_LED_SIGNAL5 4
-#define TL_WA850RE_V2_GPIO_LED_WLAN 13
-
-#define TL_WA850RE_V2_GPIO_ENABLE_LEDS 15
-
-#define TL_WA855REV1_GPIO_LED_RED 11
-#define TL_WA855REV1_GPIO_LED_GREEN 12
-
-#define TL_WA860RE_GPIO_LED_WLAN_ORANGE 0
-#define TL_WA860RE_GPIO_LED_WLAN_GREEN 2
-#define TL_WA860RE_GPIO_LED_POWER_ORANGE 12
-#define TL_WA860RE_GPIO_LED_POWER_GREEN 14
-#define TL_WA860RE_GPIO_LED_LAN 20
-
-#define TL_WA801ND_V2_GPIO_LED_LAN 18
-#define TL_WA801ND_V2_GPIO_LED_SYSTEM 14
-
-#define TL_WAX50RE_GPIO_BTN_RESET 17
-#define TL_WAX50RE_GPIO_BTN_WPS 16
-
-#define TL_WA860RE_GPIO_BTN_RESET 17
-#define TL_WA860RE_GPIO_BTN_WPS 16
-#define TL_WA860RE_GPIO_BTN_ONOFF 11
-
-#define TL_WAX50RE_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL (3 * TL_WAX50RE_KEYS_POLL_INTERVAL)
-
-static const char *tl_wax50re_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wax50re_flash_data = {
- .part_probes = tl_wax50re_part_probes,
-};
-
-static struct gpio_led tl_wa750re_leds_gpio[] __initdata = {
- {
- .name = "tp-link:orange:lan",
- .gpio = TL_WAX50RE_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "tp-link:orange:wlan",
- .gpio = TL_WAX50RE_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "tp-link:orange:re",
- .gpio = TL_WAX50RE_GPIO_LED_RE,
- .active_low = 1,
- }, {
- .name = "tp-link:orange:signal1",
- .gpio = TL_WAX50RE_GPIO_LED_SIGNAL1,
- .active_low = 1,
- }, {
- .name = "tp-link:orange:signal2",
- .gpio = TL_WAX50RE_GPIO_LED_SIGNAL2,
- .active_low = 1,
- }, {
- .name = "tp-link:orange:signal3",
- .gpio = TL_WAX50RE_GPIO_LED_SIGNAL3,
- .active_low = 1,
- }, {
- .name = "tp-link:orange:signal4",
- .gpio = TL_WAX50RE_GPIO_LED_SIGNAL4,
- .active_low = 1,
- }, {
- .name = "tp-link:orange:signal5",
- .gpio = TL_WAX50RE_GPIO_LED_SIGNAL5,
- .active_low = 1,
- },
-};
-
-static struct gpio_led tl_wa850re_leds_gpio[] __initdata = {
- {
- .name = "tp-link:blue:lan",
- .gpio = TL_WAX50RE_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:wlan",
- .gpio = TL_WAX50RE_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:re",
- .gpio = TL_WAX50RE_GPIO_LED_RE,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:signal1",
- .gpio = TL_WAX50RE_GPIO_LED_SIGNAL1,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:signal2",
- .gpio = TL_WAX50RE_GPIO_LED_SIGNAL2,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:signal3",
- .gpio = TL_WAX50RE_GPIO_LED_SIGNAL3,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:signal4",
- .gpio = TL_WAX50RE_GPIO_LED_SIGNAL4,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:signal5",
- .gpio = TL_WAX50RE_GPIO_LED_SIGNAL5,
- .active_low = 1,
- },
-};
-
-static struct gpio_led tl_wa850re_v2_leds_gpio[] __initdata = {
- {
- .name = "tp-link:blue:lan",
- .gpio = TL_WA850RE_V2_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:re",
- .gpio = TL_WA850RE_V2_GPIO_LED_RE,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:signal1",
- .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL1,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:signal2",
- .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL2,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:signal3",
- .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL3,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:signal4",
- .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL4,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:signal5",
- .gpio = TL_WA850RE_V2_GPIO_LED_SIGNAL5,
- .active_low = 1,
- }, {
- .name = "tp-link:blue:wlan",
- .gpio = TL_WA850RE_V2_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_led tl_wa855re_v1_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:power",
- .gpio = TL_WA855REV1_GPIO_LED_GREEN,
- .active_low = 0,
- }, {
- .name = "tp-link:red:power",
- .gpio = TL_WA855REV1_GPIO_LED_RED,
- .active_low = 0,
- },
-};
-
-static struct gpio_led tl_wa860re_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan",
- .gpio = TL_WA860RE_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:power",
- .gpio = TL_WA860RE_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- }, {
- .name = "tp-link:orange:power",
- .gpio = TL_WA860RE_GPIO_LED_POWER_ORANGE,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WA860RE_GPIO_LED_WLAN_GREEN,
- .active_low = 1,
- }, {
- .name = "tp-link:orange:wlan",
- .gpio = TL_WA860RE_GPIO_LED_WLAN_ORANGE,
- .active_low = 1,
- },
-};
-
-
-static struct gpio_keys_button tl_wax50re_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WAX50RE_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "WPS",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WAX50RE_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wa860re_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA860RE_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "WPS",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA860RE_GPIO_BTN_WPS,
- .active_low = 1,
- }, {
- .desc = "ONOFF",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = TL_WAX50RE_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WA860RE_GPIO_BTN_ONOFF,
- .active_low = 1,
- },
-};
-
-static struct gpio_led tl_wa801nd_v2_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan",
- .gpio = TL_WA801ND_V2_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WAX50RE_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WAX50RE_GPIO_LED_RE,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WA801ND_V2_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static void __init tl_ap123_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_wax50re_flash_data);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
-
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, mac);
-}
-
-static void __init tl_ap143_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f3c0008);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(NULL);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, -2);
- ath79_register_eth(0);
-
- ath79_init_mac(tmpmac, mac, 0);
- ath79_register_wmac(ee, mac);
-}
-
-static void __init tl_wa750re_setup(void)
-{
- tl_ap123_setup();
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa750re_leds_gpio),
- tl_wa750re_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wax50re_gpio_keys),
- tl_wax50re_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA750RE, "TL-WA750RE", "TP-LINK TL-WA750RE",
- tl_wa750re_setup);
-
-static void __init tl_wa801nd_v2_setup(void)
-{
- tl_ap123_setup();
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801nd_v2_leds_gpio),
- tl_wa801nd_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wax50re_gpio_keys),
- tl_wax50re_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA801ND_V2, "TL-WA801ND-v2", "TP-LINK TL-WA801ND v2",
- tl_wa801nd_v2_setup);
-
-static void __init tl_wa850re_setup(void)
-{
- tl_ap123_setup();
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa850re_leds_gpio),
- tl_wa850re_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wax50re_gpio_keys),
- tl_wax50re_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA850RE, "TL-WA850RE", "TP-LINK TL-WA850RE",
- tl_wa850re_setup);
-
-static void __init tl_wa850re_v2_setup(void)
-{
- tl_ap143_setup();
-
- /* For GPIO 0~4 */
- ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
- AR934X_GPIO_FUNC_CLK_OBS4_EN);
-
- /* Allow to enable/disable all LEDs from userspace */
- gpio_request_one(TL_WA850RE_V2_GPIO_ENABLE_LEDS,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "LEDs enable");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa850re_v2_leds_gpio),
- tl_wa850re_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wax50re_gpio_keys),
- tl_wax50re_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA850RE_V2, "TL-WA850RE-V2",
- "TP-LINK TL-WA850RE v2", tl_wa850re_v2_setup);
-
-static void __init tl_wa855re_v1_setup(void)
-{
- tl_ap143_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa855re_v1_leds_gpio),
- tl_wa855re_v1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wax50re_gpio_keys),
- tl_wax50re_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA855RE_V1, "TL-WA855RE-v1", "TP-LINK TL-WA855RE v1",
- tl_wa855re_v1_setup);
-
-static void __init tl_wa860re_setup(void)
-{
- tl_ap123_setup();
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa860re_leds_gpio),
- tl_wa860re_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wa860re_gpio_keys),
- tl_wa860re_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA860RE, "TL-WA860RE", "TP-LINK TL-WA860RE",
- tl_wa860re_setup);
-
-static void __init tl_wa901nd_v3_setup(void)
-{
- tl_ap123_setup();
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wa801nd_v2_leds_gpio),
- tl_wa801nd_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WAX50RE_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wax50re_gpio_keys) - 1,
- tl_wax50re_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WA901ND_V3, "TL-WA901ND-v3", "TP-LINK TL-WA901ND v3",
- tl_wa901nd_v3_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3320-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3320-v2.c
deleted file mode 100644
index 3e452f2a4a..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3320-v2.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * TP-LINK TL-WDR3320 v2 board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2015 Weijie Gao <hackpascal@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WDR3320_GPIO_LED_WLAN5G 12
-#define WDR3320_GPIO_LED_SYSTEM 14
-#define WDR3320_GPIO_LED_QSS 15
-#define WDR3320_GPIO_LED_WAN 4
-#define WDR3320_GPIO_LED_LAN1 18
-#define WDR3320_GPIO_LED_LAN2 20
-#define WDR3320_GPIO_LED_LAN3 21
-#define WDR3320_GPIO_LED_LAN4 22
-
-#define WDR3320_GPIO_BTN_RESET 16
-
-#define WDR3320_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WDR3320_KEYS_DEBOUNCE_INTERVAL (3 * WDR3320_KEYS_POLL_INTERVAL)
-
-#define WDR3320_WMAC_CALDATA_OFFSET 0x1000
-#define WDR3320_PCIE_CALDATA_OFFSET 0x5000
-
-static const char *wdr3320_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data wdr3320_flash_data = {
- .part_probes = wdr3320_part_probes,
-};
-
-static struct gpio_led wdr3320_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:qss",
- .gpio = WDR3320_GPIO_LED_QSS,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:system",
- .gpio = WDR3320_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wlan5g",
- .gpio = WDR3320_GPIO_LED_WLAN5G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button wdr3320_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WDR3320_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WDR3320_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init wdr3320_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(&wdr3320_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr3320_leds_gpio),
- wdr3320_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WDR3320_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wdr3320_gpio_keys),
- wdr3320_gpio_keys);
-
- ath79_init_mac(tmpmac, mac, 0);
- ath79_register_wmac(art + WDR3320_WMAC_CALDATA_OFFSET, tmpmac);
-
- ath79_init_mac(tmpmac, mac, -1);
- ap9x_pci_setup_wmac_led_pin(0, 0);
- ap91_pci_init(art + WDR3320_PCIE_CALDATA_OFFSET, tmpmac);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(1, 0x0);
-
- /* LAN */
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-
- ath79_register_eth(1);
-
- /* WAN */
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-
- /* GMAC0 is connected to the PHY4 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
-
- ath79_register_eth(0);
-
- ath79_register_usb();
-
- ath79_gpio_output_select(WDR3320_GPIO_LED_LAN1,
- AR934X_GPIO_OUT_LED_LINK0);
- ath79_gpio_output_select(WDR3320_GPIO_LED_LAN2,
- AR934X_GPIO_OUT_LED_LINK1);
- ath79_gpio_output_select(WDR3320_GPIO_LED_LAN3,
- AR934X_GPIO_OUT_LED_LINK2);
- ath79_gpio_output_select(WDR3320_GPIO_LED_LAN4,
- AR934X_GPIO_OUT_LED_LINK3);
- ath79_gpio_output_select(WDR3320_GPIO_LED_WAN,
- AR934X_GPIO_OUT_LED_LINK4);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WDR3320_V2, "TL-WDR3320-v2",
- "TP-LINK TL-WDR3320 v2",
- wdr3320_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3500.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3500.c
deleted file mode 100644
index 452c20b777..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr3500.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * TP-LINK TL-WDR3500 board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2013 Gui Iribarren <gui@altermundi.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WDR3500_GPIO_LED_USB 11
-#define WDR3500_GPIO_LED_WLAN2G 13
-#define WDR3500_GPIO_LED_SYSTEM 14
-#define WDR3500_GPIO_LED_QSS 15
-#define WDR3500_GPIO_LED_WAN 18
-#define WDR3500_GPIO_LED_LAN1 19
-#define WDR3500_GPIO_LED_LAN2 20
-#define WDR3500_GPIO_LED_LAN3 21
-#define WDR3500_GPIO_LED_LAN4 22
-
-#define WDR3500_GPIO_BTN_WPS 16
-#define WDR3500_GPIO_BTN_RFKILL 17
-
-#define WDR3500_GPIO_USB_POWER 12
-
-#define WDR3500_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WDR3500_KEYS_DEBOUNCE_INTERVAL (3 * WDR3500_KEYS_POLL_INTERVAL)
-
-#define WDR3500_MAC0_OFFSET 0
-#define WDR3500_MAC1_OFFSET 6
-#define WDR3500_WMAC_CALDATA_OFFSET 0x1000
-#define WDR3500_PCIE_CALDATA_OFFSET 0x5000
-
-static const char *wdr3500_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data wdr3500_flash_data = {
- .part_probes = wdr3500_part_probes,
-};
-
-static struct gpio_led wdr3500_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:qss",
- .gpio = WDR3500_GPIO_LED_QSS,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:system",
- .gpio = WDR3500_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:usb",
- .gpio = WDR3500_GPIO_LED_USB,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wlan2g",
- .gpio = WDR3500_GPIO_LED_WLAN2G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button wdr3500_gpio_keys[] __initdata = {
- {
- .desc = "QSS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WDR3500_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WDR3500_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "RFKILL switch",
- .type = EV_SW,
- .code = KEY_RFKILL,
- .debounce_interval = WDR3500_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WDR3500_GPIO_BTN_RFKILL,
- },
-};
-
-
-static void __init wdr3500_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(&wdr3500_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr3500_leds_gpio),
- wdr3500_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WDR3500_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wdr3500_gpio_keys),
- wdr3500_gpio_keys);
-
- ath79_init_mac(tmpmac, mac, 0);
- ath79_register_wmac(art + WDR3500_WMAC_CALDATA_OFFSET, tmpmac);
-
- ath79_init_mac(tmpmac, mac, 1);
- ap9x_pci_setup_wmac_led_pin(0, 0);
- ap91_pci_init(art + WDR3500_PCIE_CALDATA_OFFSET, tmpmac);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(1, 0x0);
-
- /* LAN */
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-
- ath79_register_eth(1);
-
- /* WAN */
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 2);
-
- /* GMAC0 is connected to the PHY4 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
-
- ath79_register_eth(0);
-
- gpio_request_one(WDR3500_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_gpio_output_select(WDR3500_GPIO_LED_LAN1,
- AR934X_GPIO_OUT_LED_LINK3);
- ath79_gpio_output_select(WDR3500_GPIO_LED_LAN2,
- AR934X_GPIO_OUT_LED_LINK2);
- ath79_gpio_output_select(WDR3500_GPIO_LED_LAN3,
- AR934X_GPIO_OUT_LED_LINK1);
- ath79_gpio_output_select(WDR3500_GPIO_LED_LAN4,
- AR934X_GPIO_OUT_LED_LINK0);
- ath79_gpio_output_select(WDR3500_GPIO_LED_WAN,
- AR934X_GPIO_OUT_LED_LINK4);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WDR3500, "TL-WDR3500",
- "TP-LINK TL-WDR3500",
- wdr3500_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c
deleted file mode 100644
index b9fea95bc2..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr4300.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * TP-LINK TL-WDR4300 board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WDR4300_GPIO_LED_USB1 11
-#define WDR4300_GPIO_LED_USB2 12
-#define WDR4300_GPIO_LED_WLAN2G 13
-#define WDR4300_GPIO_LED_SYSTEM 14
-#define WDR4300_GPIO_LED_QSS 15
-
-#define WDR4300_GPIO_BTN_WPS 16
-#define WDR4300_GPIO_BTN_RFKILL 17
-
-#define WDR4300_GPIO_EXTERNAL_LNA0 18
-#define WDR4300_GPIO_EXTERNAL_LNA1 19
-
-#define WDR4300_GPIO_USB1_POWER 22
-#define WDR4300_GPIO_USB2_POWER 21
-
-#define WDR4300_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WDR4300_KEYS_DEBOUNCE_INTERVAL (3 * WDR4300_KEYS_POLL_INTERVAL)
-
-#define WDR4300_MAC0_OFFSET 0
-#define WDR4300_MAC1_OFFSET 6
-#define WDR4300_WMAC_CALDATA_OFFSET 0x1000
-#define WDR4300_PCIE_CALDATA_OFFSET 0x5000
-
-static const char *wdr4300_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data wdr4300_flash_data = {
- .part_probes = wdr4300_part_probes,
-};
-
-static struct gpio_led wdr4300_leds_gpio[] __initdata = {
- {
- .name = "tp-link:blue:qss",
- .gpio = WDR4300_GPIO_LED_QSS,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:system",
- .gpio = WDR4300_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:usb1",
- .gpio = WDR4300_GPIO_LED_USB1,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:usb2",
- .gpio = WDR4300_GPIO_LED_USB2,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:wlan2g",
- .gpio = WDR4300_GPIO_LED_WLAN2G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button wdr4300_gpio_keys[] __initdata = {
- {
- .desc = "QSS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WDR4300_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WDR4300_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "RFKILL switch",
- .type = EV_SW,
- .code = KEY_RFKILL,
- .debounce_interval = WDR4300_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WDR4300_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
-};
-
-static const struct ar8327_led_info wdr4300_leds_ar8327[] = {
- AR8327_LED_INFO(PHY0_0, HW, "tp-link:blue:wan"),
- AR8327_LED_INFO(PHY1_0, HW, "tp-link:blue:lan1"),
- AR8327_LED_INFO(PHY2_0, HW, "tp-link:blue:lan2"),
- AR8327_LED_INFO(PHY3_0, HW, "tp-link:blue:lan3"),
- AR8327_LED_INFO(PHY4_0, HW, "tp-link:blue:lan4"),
-};
-
-static struct ar8327_pad_cfg wdr4300_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_led_cfg wdr4300_ar8327_led_cfg = {
- .led_ctrl0 = 0xc737c737,
- .led_ctrl1 = 0x00000000,
- .led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x0030c300,
- .open_drain = false,
-};
-
-static struct ar8327_platform_data wdr4300_ar8327_data = {
- .pad0_cfg = &wdr4300_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &wdr4300_ar8327_led_cfg,
- .num_leds = ARRAY_SIZE(wdr4300_leds_ar8327),
- .leds = wdr4300_leds_ar8327,
-};
-
-static struct mdio_board_info wdr4300_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &wdr4300_ar8327_data,
- },
-};
-
-static void __init wdr4300_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(&wdr4300_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wdr4300_leds_gpio),
- wdr4300_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WDR4300_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wdr4300_gpio_keys),
- wdr4300_gpio_keys);
-
- ath79_wmac_set_ext_lna_gpio(0, WDR4300_GPIO_EXTERNAL_LNA0);
- ath79_wmac_set_ext_lna_gpio(1, WDR4300_GPIO_EXTERNAL_LNA1);
-
- ath79_init_mac(tmpmac, mac, -1);
- ath79_register_wmac(art + WDR4300_WMAC_CALDATA_OFFSET, tmpmac);
-
- ath79_init_mac(tmpmac, mac, 0);
- ap9x_pci_setup_wmac_led_pin(0, 0);
- ap91_pci_init(art + WDR4300_PCIE_CALDATA_OFFSET, tmpmac);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-
- mdiobus_register_board_info(wdr4300_mdio0_info,
- ARRAY_SIZE(wdr4300_mdio0_info));
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- /* GMAC0 is connected to an AR8327N switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-
- gpio_request_one(WDR4300_GPIO_USB1_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB1 power");
- gpio_request_one(WDR4300_GPIO_USB2_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB2 power");
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WDR4300, "TL-WDR4300",
- "TP-LINK TL-WDR3600/4300/4310",
- wdr4300_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c
deleted file mode 100644
index 1e72477646..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * TP-LINK TL-WDR6500 v2
- *
- * Copyright (C) 2015 Weijie Gao <hackpascal@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define TL_WDR6500_V2_GPIO_LED_SYS 21
-#define TL_WDR6500_V2_GPIO_LED_WAN 18
-#define TL_WDR6500_V2_GPIO_LED_LAN1 17
-#define TL_WDR6500_V2_GPIO_LED_LAN2 16
-#define TL_WDR6500_V2_GPIO_LED_LAN3 15
-#define TL_WDR6500_V2_GPIO_LED_LAN4 14
-
-#define TL_WDR6500_V2_GPIO_BTN_RESET 1
-
-#define TL_WDR6500_V2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WDR6500_V2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WDR6500_V2_KEYS_POLL_INTERVAL)
-
-#define TL_WDR6500_V2_WMAC_CALDATA_OFFSET 0x1000
-#define TL_WDR6500_V2_PCIE_CALDATA_OFFSET 0x5000
-
-static const char *tl_wdr6500_v2_part_probes[] = {
- "tp-link-64k",
- NULL,
-};
-
-static struct flash_platform_data tl_wdr6500_v2_flash_data = {
- .part_probes = tl_wdr6500_v2_part_probes,
-};
-
-static struct gpio_led tl_wdr6500_v2_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan1",
- .gpio = TL_WDR6500_V2_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan2",
- .gpio = TL_WDR6500_V2_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan3",
- .gpio = TL_WDR6500_V2_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan4",
- .gpio = TL_WDR6500_V2_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wan",
- .gpio = TL_WDR6500_V2_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "tp-link:white:system",
- .gpio = TL_WDR6500_V2_GPIO_LED_SYS,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button tl_wdr6500_v2_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WDR6500_V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WDR6500_V2_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-
-static void __init tl_ap151_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(&tl_wdr6500_v2_flash_data);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(1, 0x0);
-
- /* WAN */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- /* LAN */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_eth(1);
-
- ath79_init_mac(tmpmac, mac, -1);
- ath79_register_wmac(ee + TL_WDR6500_V2_WMAC_CALDATA_OFFSET, tmpmac);
-
- ath79_register_pci();
-
- ath79_register_usb();
-}
-
-static void __init tl_wdr6500_v2_setup(void)
-{
- tl_ap151_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wdr6500_v2_leds_gpio),
- tl_wdr6500_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TL_WDR6500_V2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wdr6500_v2_gpio_keys),
- tl_wdr6500_v2_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WDR6500_V2, "TL-WDR6500-v2", "TP-LINK TL-WDR6500 v2",
- tl_wdr6500_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c
deleted file mode 100644
index a95a11c122..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wpa8630.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * TP-Link TL-WPA8630 board support
- *
- * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-
-#define TL_WPA8630_KEYS_POLL_INTERVAL 20
-#define TL_WPA8630_KEYS_DEBOUNCE_INTERVAL (3 * TL_WPA8630_KEYS_POLL_INTERVAL)
-
-#define TL_WPA8630_GPIO_LED_POWER 1
-#define TL_WPA8630_GPIO_LED_LAN 5
-#define TL_WPA8630_GPIO_LED_WLAN 19
-#define TL_WPA8630_GPIO_LED_WLAN5 21
-
-#define TL_WPA8630_GPIO_BTN_RESET 2
-#define TL_WPA8630_GPIO_BTN_RFKILL 8
-#define TL_WPA8630_GPIO_BTN_LED 6
-#define TL_WPA8630_GPIO_BTN_PAIR 7
-
-#define TL_WPA8630_MAC0_OFFSET 0x0000
-#define TL_WPA8630_WMAC_CALDATA_OFFSET 0x1000
-#define TL_WPA8630_PCI_CALDATA_OFFSET 0x5000
-
-static const char *tl_wpa8630_part_probes[] = {
- "tp-link-64k",
- NULL,
-};
-
-static struct flash_platform_data tl_wpa8630_flash_data = {
- .part_probes = tl_wpa8630_part_probes,
- .type = "s25fl064k",
-};
-
-static struct gpio_led tl_wpa8630_leds_gpio[] __initdata = {
- {
- .name = "tl-wpa8630:green:power",
- .gpio = TL_WPA8630_GPIO_LED_POWER,
- .active_low = 1,
- },
- {
- .name = "tl-wpa8630:green:lan",
- .gpio = TL_WPA8630_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "tl-wpa8630:green:wlan",
- .gpio = TL_WPA8630_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "tl-wpa8630:green:wlan5",
- .gpio = TL_WPA8630_GPIO_LED_WLAN5,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wpa8630_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WPA8630_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WPA8630_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
- {
- .desc = "LED",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WPA8630_GPIO_BTN_LED,
- .active_low = 1,
- },
- {
- .desc = "Pair",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = TL_WPA8630_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WPA8630_GPIO_BTN_PAIR,
- .active_low = 1,
- },
-};
-
-/* GMAC0 of the QCA8337 switch is connected to the QCA9563 SoC via SGMII */
-static struct ar8327_pad_cfg tl_wpa8630_qca8337_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data tl_wpa8630_qca8337_data = {
- .pad0_cfg = &tl_wpa8630_qca8337_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info tl_wpa8630_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &tl_wpa8630_qca8337_data,
- },
-};
-
-static void __init tl_wpa8630_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(&tl_wpa8630_flash_data);
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + TL_WPA8630_MAC0_OFFSET, 0);
-
- platform_device_register(&ath79_mdio0_device);
-
- mdiobus_register_board_info(tl_wpa8630_mdio0_info,
- ARRAY_SIZE(tl_wpa8630_mdio0_info));
-
- /* GMAC0 is connected to an AR8337 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_mask = ~BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- ath79_register_eth(0);
-
- ath79_register_wmac(art + TL_WPA8630_WMAC_CALDATA_OFFSET, mac);
-
- ap91_pci_init(art + TL_WPA8630_PCI_CALDATA_OFFSET, NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wpa8630_leds_gpio),
- tl_wpa8630_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WPA8630_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wpa8630_gpio_keys),
- tl_wpa8630_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WPA8630, "TL-WPA8630", "TP-LINK TL-WPA8630",
- tl_wpa8630_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c
deleted file mode 100644
index c98dd4ff00..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1041n-v2.c
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * TP-LINK TL-WR1041 v2 board support
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2011-2012 Anan Huang <axishero@foxmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR1041NV2_GPIO_BTN_RESET 14
-#define TL_WR1041NV2_GPIO_LED_WPS 13
-#define TL_WR1041NV2_GPIO_LED_WLAN 11
-
-#define TL_WR1041NV2_GPIO_LED_SYSTEM 12
-
-#define TL_WR1041NV2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1041NV2_KEYS_POLL_INTERVAL)
-
-#define TL_WR1041NV2_PCIE_CALDATA_OFFSET 0x5000
-
-static const char *tl_wr1041nv2_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr1041nv2_flash_data = {
- .part_probes = tl_wr1041nv2_part_probes,
-};
-
-static struct gpio_led tl_wr1041nv2_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:system",
- .gpio = TL_WR1041NV2_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wps",
- .gpio = TL_WR1041NV2_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR1041NV2_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_wr1041nv2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR1041NV2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR1041NV2_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static const struct ar8327_led_info tl_wr1041n_leds_ar8327[] = {
- AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:wan"),
- AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan1"),
- AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"),
- AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan3"),
- AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:lan4"),
-};
-
-static struct ar8327_led_cfg wr1041n_v2_ar8327_led_cfg = {
- .led_ctrl0 = 0xcf35cf35, /* LED0: blink at 10/100/1000M */
- .led_ctrl1 = 0xcf35cf35, /* LED1: blink at 10/100/1000M: anyway, no LED1 on tl-wr1041n */
- .led_ctrl2 = 0xcf35cf35, /* LED2: blink at 10/100/1000M: anyway, no LED2 on tl-wr1041n */
- .led_ctrl3 = 0x03ffff00, /* Pattern enabled for LED 0-2 of port 1-3 */
- .open_drain = true,
-};
-
-static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data db120_ar8327_data = {
- .pad0_cfg = &db120_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &wr1041n_v2_ar8327_led_cfg,
- .num_leds = ARRAY_SIZE(tl_wr1041n_leds_ar8327),
- .leds = tl_wr1041n_leds_ar8327
-};
-
-static struct mdio_board_info db120_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &db120_ar8327_data,
- },
-};
-
-static void __init tl_wr1041nv2_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_wr1041nv2_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1041nv2_leds_gpio),
- tl_wr1041nv2_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TL_WR1041NV2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr1041nv2_gpio_keys),
- tl_wr1041nv2_gpio_keys);
- ath79_register_wmac(ee, mac);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(1, 0x0);
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
-
- mdiobus_register_board_info(db120_mdio0_info,
- ARRAY_SIZE(db120_mdio0_info));
-
- /* GMAC0 is connected to an AR8327 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR1041N_V2, "TL-WR1041N-v2",
- "TP-LINK TL-WR1041N v2", tl_wr1041nv2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c
deleted file mode 100644
index 90b649957d..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v2.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * TP-LINK TL-WR1043ND v2 board support
- *
- * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * Based on the Qualcomm Atheros AP135/AP136 reference board support code
- * Copyright (c) 2012 Qualcomm Atheros
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR1043_V2_GPIO_LED_WLAN 12
-#define TL_WR1043_V2_GPIO_LED_USB 15
-#define TL_WR1043_V2_GPIO_LED_WPS 18
-#define TL_WR1043_V2_GPIO_LED_SYSTEM 19
-
-#define TL_WR1043_V2_GPIO_BTN_RESET 16
-#define TL_WR1043_V2_GPIO_BTN_RFKILL 17
-
-#define TL_WR1043_V2_GPIO_USB_POWER 21
-
-#define TL_WR1043_V2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043_V2_KEYS_POLL_INTERVAL)
-
-#define TL_WR1043_V2_WMAC_CALDATA_OFFSET 0x1000
-
-static const char *wr1043nd_v2_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data wr1043nd_v2_flash_data = {
- .part_probes = wr1043nd_v2_part_probes,
-};
-
-static struct gpio_led tl_wr1043_v2_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:wps",
- .gpio = TL_WR1043_V2_GPIO_LED_WPS,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:system",
- .gpio = TL_WR1043_V2_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR1043_V2_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:usb",
- .gpio = TL_WR1043_V2_GPIO_LED_USB,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr1043_v2_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR1043_V2_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = TL_WR1043_V2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR1043_V2_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
-};
-
-static const struct ar8327_led_info tl_wr1043_leds_ar8327[] = {
- AR8327_LED_INFO(PHY0_0, HW, "tp-link:green:lan4"),
- AR8327_LED_INFO(PHY1_0, HW, "tp-link:green:lan3"),
- AR8327_LED_INFO(PHY2_0, HW, "tp-link:green:lan2"),
- AR8327_LED_INFO(PHY3_0, HW, "tp-link:green:lan1"),
- AR8327_LED_INFO(PHY4_0, HW, "tp-link:green:wan"),
-};
-
-/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
-static struct ar8327_pad_cfg wr1043nd_v2_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
-static struct ar8327_pad_cfg wr1043nd_v2_ar8327_pad6_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_led_cfg wr1043nd_v2_ar8327_led_cfg = {
- .led_ctrl0 = 0xcc35cc35,
- .led_ctrl1 = 0xca35ca35,
- .led_ctrl2 = 0xc935c935,
- .led_ctrl3 = 0x03ffff00,
- .open_drain = true,
-};
-
-static struct ar8327_platform_data wr1043nd_v2_ar8327_data = {
- .pad0_cfg = &wr1043nd_v2_ar8327_pad0_cfg,
- .pad6_cfg = &wr1043nd_v2_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &wr1043nd_v2_ar8327_led_cfg,
- .num_leds = ARRAY_SIZE(tl_wr1043_leds_ar8327),
- .leds = tl_wr1043_leds_ar8327,
-};
-
-static struct mdio_board_info wr1043nd_v2_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &wr1043nd_v2_ar8327_data,
- },
-};
-
-static void __init tl_wr1043nd_v2_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(&wr1043nd_v2_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043_v2_leds_gpio),
- tl_wr1043_v2_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TL_WR1043_V2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr1043_v2_gpio_keys),
- tl_wr1043_v2_gpio_keys);
-
- ath79_register_wmac(art + TL_WR1043_V2_WMAC_CALDATA_OFFSET, mac);
-
- mdiobus_register_board_info(wr1043nd_v2_mdio0_info,
- ARRAY_SIZE(wr1043nd_v2_mdio0_info));
- ath79_register_mdio(0, 0x0);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x56000000;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_eth(1);
-
- ath79_register_usb();
-
- gpio_request_one(TL_WR1043_V2_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V2, "TL-WR1043ND-v2",
- "TP-LINK TL-WR1043ND v2", tl_wr1043nd_v2_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c
deleted file mode 100644
index 04ea49c753..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd-v4.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * TP-LINK WR1043 V4 support
- *
- * Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
- * Copyright (C) 2016 Matthias Schiffer <mschiffer@universe-factory.net>
- * Copyright (C) 2016 Andreas Ziegler <github@andreas-ziegler.de>
- * Copyright (C) 2016 Ludwig Thomeczek <ledesrc@wxorx.net>
- * Copyright (C) 2017 Tim Thorpe <tim@tfthorpe.net>
- *
- * Derived from: mach-dir-869-a1.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/irq.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include <linux/platform_data/phy-at803x.h>
-#include <linux/ar8216_platform.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "nvram.h"
-
-#define TL_WR1043_V4_GPIO_BTN_RESET 2
-#define TL_WR1043_V4_GPIO_BTN_RFKILL 5
-
-#define TL_WR1043_V4_GPIO_LED_WLAN 19
-#define TL_WR1043_V4_GPIO_LED_USB 7
-#define TL_WR1043_V4_GPIO_LED_WPS 1
-#define TL_WR1043_V4_GPIO_LED_SYSTEM 6
-
-#define TL_WR1043_V4_GPIO_USB_POWER 8
-
-#define TL_WR1043_V4_GPIO_LED_INET 15
-#define TL_WR1043_V4_GPIO_LED_WAN 16
-#define TL_WR1043_V4_GPIO_LED_LAN1 9
-#define TL_WR1043_V4_GPIO_LED_LAN2 14
-#define TL_WR1043_V4_GPIO_LED_LAN3 21
-#define TL_WR1043_V4_GPIO_LED_LAN4 20
-
-#define TL_WR1043_V4_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043_V4_KEYS_POLL_INTERVAL)
-
-#define TL_WR1043_V4_MAC_LOCATION 0x1ff50008
-
-#define TL_WR1043_V4_EEPROM_ADDR 0x1fff0000
-#define TL_WR1043_V4_WMAC_CALDATA_OFFSET 0x1000
-
-#define TL_WR1043_V5_MAC_LOCATION 0x1ff00008
-
-static struct gpio_led tl_wr1043nd_v4_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:wps",
- .gpio = TL_WR1043_V4_GPIO_LED_WPS,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:system",
- .gpio = TL_WR1043_V4_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR1043_V4_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:usb",
- .gpio = TL_WR1043_V4_GPIO_LED_USB,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wan",
- .gpio = TL_WR1043_V4_GPIO_LED_INET,
- .active_low = 1,
- },
- {
- .name = "tp-link:orange:wan",
- .gpio = TL_WR1043_V4_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:lan1",
- .gpio = TL_WR1043_V4_GPIO_LED_LAN1,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:lan2",
- .gpio = TL_WR1043_V4_GPIO_LED_LAN2,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:lan3",
- .gpio = TL_WR1043_V4_GPIO_LED_LAN3,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:lan4",
- .gpio = TL_WR1043_V4_GPIO_LED_LAN4,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr1043nd_v4_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR1043_V4_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = TL_WR1043_V4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR1043_V4_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg tl_wr1043nd_v4_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data tl_wr1043nd_v4_ar8327_data = {
- .pad0_cfg = &tl_wr1043nd_v4_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info tl_wr1043nd_v4_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &tl_wr1043nd_v4_ar8327_data,
- },
-};
-
-static void __init tl_wr1043nd_v4_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043_V4_MAC_LOCATION);
- u8 *eeprom = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR);
-
- ath79_register_m25p80(NULL);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_mask = BIT(0);
-
- mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info,
- ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info));
-
- ath79_register_usb();
- ath79_register_mdio(0, 0);
- ath79_register_eth(0);
-
- ath79_register_wmac(eeprom + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_v4_leds_gpio),
- tl_wr1043nd_v4_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys),
- tl_wr1043nd_v4_gpio_keys);
-
- gpio_request_one(TL_WR1043_V4_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR1043ND_V4, "TL-WR1043ND-v4",
- "TP-LINK TL-WR1043ND v4", tl_wr1043nd_v4_setup);
-
-static struct gpio_led tl_wr1043n_v5_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:wps",
- .gpio = TL_WR1043_V4_GPIO_LED_WPS,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:system",
- .gpio = TL_WR1043_V4_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR1043_V4_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wan",
- .gpio = TL_WR1043_V4_GPIO_LED_INET,
- .active_low = 1,
- },
- {
- .name = "tp-link:orange:wan",
- .gpio = TL_WR1043_V4_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:lan1",
- .gpio = TL_WR1043_V4_GPIO_LED_LAN1,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:lan2",
- .gpio = TL_WR1043_V4_GPIO_LED_LAN2,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:lan3",
- .gpio = TL_WR1043_V4_GPIO_LED_LAN3,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:lan4",
- .gpio = TL_WR1043_V4_GPIO_LED_LAN4,
- .active_low = 1,
- },
-};
-
-/* The 1043Nv5 is identical to the 1043NDv4,
- * only missing the usb and small firmware layout changes */
-static void __init tl_wr1043nv5_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(TL_WR1043_V4_EEPROM_ADDR);
- u8 *mac = (u8 *) KSEG1ADDR(TL_WR1043_V5_MAC_LOCATION);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043n_v5_leds_gpio),
- tl_wr1043n_v5_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TL_WR1043_V4_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr1043nd_v4_gpio_keys),
- tl_wr1043nd_v4_gpio_keys);
-
- platform_device_register(&ath79_mdio0_device);
-
- mdiobus_register_board_info(tl_wr1043nd_v4_mdio0_info,
- ARRAY_SIZE(tl_wr1043nd_v4_mdio0_info));
-
- ath79_register_wmac(art + TL_WR1043_V4_WMAC_CALDATA_OFFSET, mac);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- /* GMAC0 is connected to an AR8337 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR1043N_V5, "TL-WR1043N-v5", "TP-LINK TL-WR1043N v5",
- tl_wr1043nv5_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd.c
deleted file mode 100644
index 4e4b85d736..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr1043nd.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * TP-LINK TL-WR1043N/ND board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR1043ND_GPIO_LED_USB 1
-#define TL_WR1043ND_GPIO_LED_SYSTEM 2
-#define TL_WR1043ND_GPIO_LED_QSS 5
-#define TL_WR1043ND_GPIO_LED_WLAN 9
-
-#define TL_WR1043ND_GPIO_BTN_RESET 3
-#define TL_WR1043ND_GPIO_BTN_QSS 7
-
-#define TL_WR1043ND_GPIO_RTL8366_SDA 18
-#define TL_WR1043ND_GPIO_RTL8366_SCK 19
-
-#define TL_WR1043ND_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR1043ND_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr1043nd_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr1043nd_flash_data = {
- .part_probes = tl_wr1043nd_part_probes,
-};
-
-static struct gpio_led tl_wr1043nd_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:usb",
- .gpio = TL_WR1043ND_GPIO_LED_USB,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WR1043ND_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR1043ND_GPIO_LED_QSS,
- .active_low = 0,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR1043ND_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_wr1043nd_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR1043ND_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR1043ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR1043ND_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static void tl_wr1043nd_rtl8366rb_hw_reset(struct rtl8366_smi *smi, bool active)
-{
- if (active)
- ath79_device_reset_set(AR71XX_RESET_GE0_PHY);
- else
- ath79_device_reset_clear(AR71XX_RESET_GE0_PHY);
-}
-
-static struct rtl8366_platform_data tl_wr1043nd_rtl8366rb_data = {
- .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA,
- .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK,
- .hw_reset = tl_wr1043nd_rtl8366rb_hw_reset,
-};
-
-static struct platform_device tl_wr1043nd_rtl8366rb_device = {
- .name = RTL8366RB_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &tl_wr1043nd_rtl8366rb_data,
- }
-};
-
-static void __init tl_wr1043nd_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- tl_wr1043nd_rtl8366rb_hw_reset(NULL, true);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_pll_data.pll_1000 = 0x1a000000;
-
- ath79_register_eth(0);
-
- ath79_register_usb();
-
- ath79_register_m25p80(&tl_wr1043nd_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
- tl_wr1043nd_leds_gpio);
-
- platform_device_register(&tl_wr1043nd_rtl8366rb_device);
-
- ath79_register_gpio_keys_polled(-1, TL_WR1043ND_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr1043nd_gpio_keys),
- tl_wr1043nd_gpio_keys);
-
- ath79_register_wmac(eeprom, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND",
- tl_wr1043nd_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c
deleted file mode 100644
index 141914aa29..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * TP-LINK TL-WR2543N/ND board support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/rtl8367.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define TL_WR2543N_GPIO_LED_WPS 0
-#define TL_WR2543N_GPIO_LED_USB 8
-
-/* The WLAN LEDs use GPIOs on the discrete AR9380 wmac */
-#define TL_WR2543N_GPIO_WMAC_LED_WLAN2G 0
-#define TL_WR2543N_GPIO_WMAC_LED_WLAN5G 1
-
-#define TL_WR2543N_GPIO_BTN_RESET 11
-#define TL_WR2543N_GPIO_BTN_WPS 12
-
-#define TL_WR2543N_GPIO_RTL8367_SDA 1
-#define TL_WR2543N_GPIO_RTL8367_SCK 6
-
-#define TL_WR2543N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr2543n_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr2543n_flash_data = {
- .part_probes = tl_wr2543n_part_probes,
-};
-
-static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:usb",
- .gpio = TL_WR2543N_GPIO_LED_USB,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wps",
- .gpio = TL_WR2543N_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_led tl_wr2543n_wmac_leds_gpio[] = {
- {
- .name = "tp-link:green:wlan2g",
- .gpio = TL_WR2543N_GPIO_WMAC_LED_WLAN2G,
- .active_low = 1,
- },
- {
- .name = "tp-link:green:wlan5g",
- .gpio = TL_WR2543N_GPIO_WMAC_LED_WLAN5G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR2543N_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR2543N_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = {
- .mode = RTL8367_EXTIF_MODE_RGMII,
- .txdelay = 1,
- .rxdelay = 0,
- .ability = {
- .force_mode = 1,
- .txpause = 1,
- .rxpause = 1,
- .link = 1,
- .duplex = 1,
- .speed = RTL8367_PORT_SPEED_1000,
- },
-};
-
-static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = {
- .gpio_sda = TL_WR2543N_GPIO_RTL8367_SDA,
- .gpio_sck = TL_WR2543N_GPIO_RTL8367_SCK,
- .extif0_cfg = &tl_wr2543n_rtl8367_extif0_cfg,
-};
-
-static struct platform_device tl_wr2543n_rtl8367_device = {
- .name = RTL8367_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &tl_wr2543n_rtl8367_data,
- }
-};
-
-static void __init tl_wr2543n_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_wr2543n_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio),
- tl_wr2543n_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr2543n_gpio_keys),
- tl_wr2543n_gpio_keys);
- ath79_register_usb();
-
- ap9x_pci_setup_wmac_leds(0, tl_wr2543n_wmac_leds_gpio,
- ARRAY_SIZE(tl_wr2543n_wmac_leds_gpio));
- ap91_pci_init(eeprom, mac);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
- ath79_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_pll_data.pll_1000 = 0x1a000000;
-
- ath79_register_eth(0);
-
- platform_device_register(&tl_wr2543n_rtl8367_device);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND",
- tl_wr2543n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr703n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr703n.c
deleted file mode 100644
index 1d8d01cc63..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr703n.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * TP-LINK TL-WR703N/TL-MR10U board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR703N_GPIO_LED_SYSTEM 27
-#define TL_WR703N_GPIO_BTN_RESET 11
-
-#define TL_WR703N_GPIO_USB_POWER 8
-
-#define TL_MR10U_GPIO_USB_POWER 18
-
-#define TL_WR703N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR703N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR703N_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr703n_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr703n_flash_data = {
- .part_probes = tl_wr703n_part_probes,
-};
-
-static struct gpio_led tl_wr703n_leds_gpio[] __initdata = {
- {
- .name = "tp-link:blue:system",
- .gpio = TL_WR703N_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr703n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR703N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR703N_GPIO_BTN_RESET,
- .active_low = 0,
- }
-};
-
-static void __init common_setup(unsigned usb_power_gpio, bool sec_ethernet)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_m25p80(&tl_wr703n_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr703n_leds_gpio),
- tl_wr703n_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TL_WR703N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr703n_gpio_keys),
- tl_wr703n_gpio_keys);
-
- gpio_request_one(usb_power_gpio,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
-
- if (sec_ethernet)
- {
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
- ath79_register_eth(1);
- }
-
- ath79_register_wmac(ee, mac);
-}
-
-static void __init tl_mr10u_setup(void)
-{
- common_setup(TL_MR10U_GPIO_USB_POWER, false);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR10U, "TL-MR10U", "TP-LINK TL-MR10U",
- tl_mr10u_setup);
-
-static void __init tl_wr703n_setup(void)
-{
- common_setup(TL_WR703N_GPIO_USB_POWER, false);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR703N, "TL-WR703N", "TP-LINK TL-WR703N v1",
- tl_wr703n_setup);
-
-static void __init tl_wr710n_setup(void)
-{
- common_setup(TL_WR703N_GPIO_USB_POWER, true);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR710N, "TL-WR710N", "TP-LINK TL-WR710N v1",
- tl_wr710n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr720n-v3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr720n-v3.c
deleted file mode 100644
index 2bb3b44a71..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr720n-v3.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * TP-LINK TL-WR720N board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2013 yousong <yszhou4tech@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR720N_GPIO_LED_SYSTEM 27
-#define TL_WR720N_GPIO_BTN_RESET 11
-#define TL_WR720N_GPIO_BTN_SW1 18
-#define TL_WR720N_GPIO_BTN_SW2 20
-
-#define TL_WR720N_GPIO_USB_POWER 8
-
-#define TL_WR720N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR720N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR720N_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr720n_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr720n_flash_data = {
- .part_probes = tl_wr720n_part_probes,
-};
-
-static struct gpio_led tl_wr720n_leds_gpio[] __initdata = {
- {
- .name = "tp-link:blue:system",
- .gpio = TL_WR720N_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr720n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR720N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR720N_GPIO_BTN_RESET,
- .active_low = 0,
- }, {
- .desc = "sw1",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = TL_WR720N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR720N_GPIO_BTN_SW1,
- .active_low = 0,
- }, {
- .desc = "sw2",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = TL_WR720N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR720N_GPIO_BTN_SW2,
- .active_low = 0,
- }
-};
-
-static void __init tl_wr720n_v3_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_m25p80(&tl_wr720n_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr720n_leds_gpio),
- tl_wr720n_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TL_WR720N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr720n_gpio_keys),
- tl_wr720n_gpio_keys);
-
- gpio_request_one(TL_WR720N_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR720N_V3, "TL-WR720N-v3", "TP-LINK TL-WR720N v3/v4",
- tl_wr720n_v3_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c
deleted file mode 100644
index 851b7624ff..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd-v4.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * TP-LINK TL-WR741ND v4/TL-MR3220 v2 board support
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR741NDV4_GPIO_BTN_RESET 11
-#define TL_WR741NDV4_GPIO_BTN_WPS 26
-
-#define TL_WR741NDV4_GPIO_LED_WLAN 0
-#define TL_WR741NDV4_GPIO_LED_QSS 1
-#define TL_WR741NDV4_GPIO_LED_WAN 13
-#define TL_WR741NDV4_GPIO_LED_LAN1 14
-#define TL_WR741NDV4_GPIO_LED_LAN2 15
-#define TL_WR741NDV4_GPIO_LED_LAN3 16
-#define TL_WR741NDV4_GPIO_LED_LAN4 17
-#define TL_WR741NDV4_GPIO_LED_SYSTEM 27
-
-#define TL_MR3220V2_GPIO_BTN_WPS 11
-#define TL_MR3220V2_GPIO_BTN_WIFI 24
-
-#define TL_MR3220V2_GPIO_LED_3G 26
-#define TL_MR3220V2_GPIO_USB_POWER 8
-
-#define TL_WR741NDV4_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741NDV4_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr741ndv4_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr741ndv4_flash_data = {
- .part_probes = tl_wr741ndv4_part_probes,
-};
-
-static struct gpio_led tl_wr741ndv4_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan1",
- .gpio = TL_WR741NDV4_GPIO_LED_LAN1,
- .active_low = 0,
- }, {
- .name = "tp-link:green:lan2",
- .gpio = TL_WR741NDV4_GPIO_LED_LAN2,
- .active_low = 0,
- }, {
- .name = "tp-link:green:lan3",
- .gpio = TL_WR741NDV4_GPIO_LED_LAN3,
- .active_low = 0,
- }, {
- .name = "tp-link:green:lan4",
- .gpio = TL_WR741NDV4_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR741NDV4_GPIO_LED_QSS,
- .active_low = 0,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WR741NDV4_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wan",
- .gpio = TL_WR741NDV4_GPIO_LED_WAN,
- .active_low = 0,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR741NDV4_GPIO_LED_WLAN,
- .active_low = 0,
- }, {
- /* the 3G LED is only present on the MR3220 v2 */
- .name = "tp-link:green:3g",
- .gpio = TL_MR3220V2_GPIO_LED_3G,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button tl_wr741ndv4_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR741NDV4_GPIO_BTN_RESET,
- .active_low = 0,
- }, {
- .desc = "WPS",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR741NDV4_GPIO_BTN_WPS,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button tl_mr3220v2_gpio_keys[] __initdata = {
- {
- .desc = "WPS",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3220V2_GPIO_BTN_WPS,
- .active_low = 0,
- }, {
- .desc = "WIFI button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = TL_WR741NDV4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_MR3220V2_GPIO_BTN_WIFI,
- .active_low = 0,
- }
-};
-
-static void __init tl_ap121_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_setup_ar933x_phy4_switch(true, true);
-
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_m25p80(&tl_wr741ndv4_flash_data);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, mac);
-}
-
-static void __init tl_wr741ndv4_setup(void)
-{
- tl_ap121_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio) - 1,
- tl_wr741ndv4_leds_gpio);
- ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr741ndv4_gpio_keys),
- tl_wr741ndv4_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR741ND_V4, "TL-WR741ND-v4",
- "TP-LINK TL-WR741ND v4", tl_wr741ndv4_setup);
-
-static void __init tl_mr3220v2_setup(void)
-{
- tl_ap121_setup();
-
- gpio_request_one(TL_MR3220V2_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741ndv4_leds_gpio),
- tl_wr741ndv4_leds_gpio);
- ath79_register_gpio_keys_polled(1, TL_WR741NDV4_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_mr3220v2_gpio_keys),
- tl_mr3220v2_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR3220_V2, "TL-MR3220-v2",
- "TP-LINK TL-MR3220 v2", tl_mr3220v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd.c
deleted file mode 100644
index 5931654bbd..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr741nd.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * TP-LINK TL-WR741ND board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define TL_WR741ND_GPIO_LED_QSS 0
-#define TL_WR741ND_GPIO_LED_SYSTEM 1
-#define TL_WR741ND_GPIO_LED_LAN1 13
-#define TL_WR741ND_GPIO_LED_LAN2 14
-#define TL_WR741ND_GPIO_LED_LAN3 15
-#define TL_WR741ND_GPIO_LED_LAN4 16
-#define TL_WR741ND_GPIO_LED_WAN 17
-
-#define TL_WR741ND_GPIO_BTN_RESET 11
-#define TL_WR741ND_GPIO_BTN_QSS 12
-
-#define TL_WR741ND_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR741ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR741ND_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr741nd_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr741nd_flash_data = {
- .part_probes = tl_wr741nd_part_probes,
-};
-
-static struct gpio_led tl_wr741nd_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan1",
- .gpio = TL_WR741ND_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan2",
- .gpio = TL_WR741ND_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan3",
- .gpio = TL_WR741ND_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan4",
- .gpio = TL_WR741ND_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR741ND_GPIO_LED_QSS,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WR741ND_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wan",
- .gpio = TL_WR741ND_GPIO_LED_WAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr741nd_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR741ND_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR741ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR741ND_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static void __init tl_wr741nd_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_wr741nd_flash_data);
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr741nd_leds_gpio),
- tl_wr741nd_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WR741ND_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr741nd_gpio_keys),
- tl_wr741nd_gpio_keys);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
-
- /* WAN port */
- ath79_register_eth(0);
-
- ap9x_pci_setup_wmac_led_pin(0, 1);
- ap91_pci_init(ee, mac);
-}
-MIPS_MACHINE(ATH79_MACH_TL_WR741ND, "TL-WR741ND", "TP-LINK TL-WR741ND",
- tl_wr741nd_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n.c
deleted file mode 100644
index 514529ca18..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * TP-LINK TL-WR802N v1, v2
- *
- * Copyright (C) 2015 Rick Pannen <pannen@gmail.com <mailto:pannen@gmail.com>>
- * Copyright (C) 2016 Thomas Roberts <tom.p.roberts@gmail.com <mailto:tom.p.roberts@gmail.com>>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR802N_GPIO_LED_SYSTEM 13
-#define TL_WR802N_GPIO_BTN_RESET 12
-
-#define TL_WR802N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR802N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR802N_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr802n_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr802n_flash_data = {
- .part_probes = tl_wr802n_part_probes,
-};
-
-static struct gpio_led tl_wr802n_v1_leds_gpio[] __initdata = {
- {
- .name = "tp-link:blue:system",
- .gpio = TL_WR802N_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_led tl_wr802n_v2_leds_gpio[] __initdata = {
- {
- .name = "tl-wr802n-v2:green:system",
- .gpio = TL_WR802N_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr802n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR802N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR802N_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init tl_ap143_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(&tl_wr802n_flash_data);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- ath79_init_mac(tmpmac, mac, 0);
- ath79_register_wmac(ee, tmpmac);
-
- ath79_register_gpio_keys_polled(1, TL_WR802N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr802n_gpio_keys),
- tl_wr802n_gpio_keys);
-}
-
-static void __init tl_wr802n_v1_setup(void)
-{
- tl_ap143_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr802n_v1_leds_gpio),
- tl_wr802n_v1_leds_gpio);
-}
-
-static void __init tl_wr802n_v2_setup(void)
-{
- tl_ap143_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr802n_v2_leds_gpio),
- tl_wr802n_v2_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR802N_V1, "TL-WR802N-v1", "TP-LINK TL-WR802N v1",
- tl_wr802n_v1_setup);
-
-MIPS_MACHINE(ATH79_MACH_TL_WR802N_V2, "TL-WR802N-v2", "TP-LINK TL-WR802N v2",
- tl_wr802n_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr810n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr810n.c
deleted file mode 100644
index 588bb9d861..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr810n.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * TP-LINK TL-WR810N board support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2016 Jens Steinhauser <jens.steinhauser@gmail.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR810N_GPIO_SWITCH_B1 0
-#define TL_WR810N_GPIO_SWITCH_B0 1
-#define TL_WR810N_GPIO_USB_POWER 11
-#define TL_WR810N_GPIO_BTN_RESET 12
-#define TL_WR810N_GPIO_LED_SYSTEM 13
-
-#define TL_WR810N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR810N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR810N_KEYS_POLL_INTERVAL)
-
-#define TL_WR810N_WMAC_CALDATA_OFFSET 0x1000
-
-static const char *tl_wr810n_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr810n_flash_data = {
- .part_probes = tl_wr810n_part_probes,
-};
-
-static struct gpio_led tl_wr810n_leds_gpio[] __initdata = {
- {
- .name = "tp-link:blue:system",
- .gpio = TL_WR810N_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr810n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR810N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR810N_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "switch_b0",
- .type = EV_SW,
- .code = BTN_0,
- .debounce_interval = TL_WR810N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR810N_GPIO_SWITCH_B0,
- .active_low = 0,
- },
- {
- .desc = "switch_b1",
- .type = EV_SW,
- .code = BTN_1,
- .debounce_interval = TL_WR810N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR810N_GPIO_SWITCH_B1,
- .active_low = 0,
- },
-};
-
-static void __init tl_ap143_setup(int lan_mac_offset)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(&tl_wr810n_flash_data);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- /* WAN */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- /* LAN */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, lan_mac_offset);
- ath79_register_eth(1);
-
- ath79_register_wmac(art + TL_WR810N_WMAC_CALDATA_OFFSET, mac);
-
- ath79_register_leds_gpio(-1,
- ARRAY_SIZE(tl_wr810n_leds_gpio),
- tl_wr810n_leds_gpio);
- ath79_register_gpio_keys_polled(-1,
- TL_WR810N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr810n_gpio_keys),
- tl_wr810n_gpio_keys);
-}
-
-static void __init tl_wr810n_setup(void)
-{
- tl_ap143_setup(-1);
-
- gpio_request_one(TL_WR810N_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-}
-
-static void __init tl_wr810n_v2_setup(void)
-{
- tl_ap143_setup(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR810N, "TL-WR810N", "TP-LINK TL-WR810N",
- tl_wr810n_setup);
-
-MIPS_MACHINE(ATH79_MACH_TL_WR810N_V2, "TL-WR810N-v2", "TP-LINK TL-WR810N v2",
- tl_wr810n_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
deleted file mode 100644
index 73cfdd9cc6..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v8.c
+++ /dev/null
@@ -1,286 +0,0 @@
-/*
- * TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR841NV8_GPIO_LED_WLAN 13
-#define TL_WR841NV8_GPIO_LED_QSS 15
-#define TL_WR841NV8_GPIO_LED_WAN 18
-#define TL_WR841NV8_GPIO_LED_LAN1 19
-#define TL_WR841NV8_GPIO_LED_LAN2 20
-#define TL_WR841NV8_GPIO_LED_LAN3 21
-#define TL_WR841NV8_GPIO_LED_LAN4 12
-#define TL_WR841NV8_GPIO_LED_SYSTEM 14
-
-#define TL_WR841NV8_GPIO_BTN_RESET 17
-#define TL_WR841NV8_GPIO_SW_RFKILL 16 /* WPS for MR3420 v2 */
-
-#define TL_MR3420V2_GPIO_LED_3G 11
-#define TL_MR3420V2_GPIO_USB_POWER 4
-
-#define TL_WR941NDV5_GPIO_LED_WLAN 13
-#define TL_WR941NDV5_GPIO_LED_QSS 15
-#define TL_WR941NDV5_GPIO_LED_WAN 18
-#define TL_WR941NDV5_GPIO_LED_LAN1 19
-#define TL_WR941NDV5_GPIO_LED_LAN2 20
-#define TL_WR941NDV5_GPIO_LED_LAN3 2
-#define TL_WR941NDV5_GPIO_LED_LAN4 3
-#define TL_WR941NDV5_GPIO_LED_SYSTEM 14
-
-#define TL_WR841NV8_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR841NV8_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr841n_v8_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr841n_v8_flash_data = {
- .part_probes = tl_wr841n_v8_part_probes,
-};
-
-static struct gpio_led tl_wr841n_v8_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan1",
- .gpio = TL_WR841NV8_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan2",
- .gpio = TL_WR841NV8_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan3",
- .gpio = TL_WR841NV8_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan4",
- .gpio = TL_WR841NV8_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR841NV8_GPIO_LED_QSS,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WR841NV8_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wan",
- .gpio = TL_WR841NV8_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR841NV8_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- /* the 3G LED is only present on the MR3420 v2 */
- .name = "tp-link:green:3g",
- .gpio = TL_MR3420V2_GPIO_LED_3G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr841n_v8_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR841NV8_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "RFKILL switch",
- .type = EV_SW,
- .code = KEY_RFKILL,
- .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR841NV8_GPIO_SW_RFKILL,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button tl_mr3420v2_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR841NV8_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "WPS",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR841NV8_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR841NV8_GPIO_SW_RFKILL,
- .active_low = 0,
- }
-};
-
-static struct gpio_led tl_wr941nd_v5_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan1",
- .gpio = TL_WR941NDV5_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan2",
- .gpio = TL_WR941NDV5_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan3",
- .gpio = TL_WR941NDV5_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan4",
- .gpio = TL_WR941NDV5_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR941NDV5_GPIO_LED_QSS,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WR941NDV5_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wan",
- .gpio = TL_WR941NDV5_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR941NDV5_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static void __init tl_ap123_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* Disable JTAG, enabling GPIOs 0-3 */
- /* Configure OBS4 line, for GPIO 4*/
- ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE,
- AR934X_GPIO_FUNC_CLK_OBS4_EN);
-
- /* config gpio4 as normal gpio function */
- ath79_gpio_output_select(TL_MR3420V2_GPIO_USB_POWER,
- AR934X_GPIO_OUT_GPIO);
-
- ath79_register_m25p80(&tl_wr841n_v8_flash_data);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
-
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
- /* GMAC0 is connected to the PHY0 of the internal switch */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the internal switch */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, mac);
-}
-
-static void __init tl_wr841n_v8_setup(void)
-{
- tl_ap123_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio) - 1,
- tl_wr841n_v8_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
- tl_wr841n_v8_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR841N_V8, "TL-WR841N-v8", "TP-LINK TL-WR841N/ND v8",
- tl_wr841n_v8_setup);
-
-
-static void __init tl_wr842n_v2_setup(void)
-{
- tl_ap123_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio),
- tl_wr841n_v8_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
- tl_wr841n_v8_gpio_keys);
-
- gpio_request_one(TL_MR3420V2_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR842N_V2, "TL-WR842N-v2", "TP-LINK TL-WR842N/ND v2",
- tl_wr842n_v2_setup);
-
-static void __init tl_mr3420v2_setup(void)
-{
- tl_ap123_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v8_leds_gpio),
- tl_wr841n_v8_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_mr3420v2_gpio_keys),
- tl_mr3420v2_gpio_keys);
-
- /* enable power for the USB port */
- gpio_request_one(TL_MR3420V2_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_MR3420_V2, "TL-MR3420-v2", "TP-LINK TL-MR3420 v2",
- tl_mr3420v2_setup);
-
-
-static void __init tl_wr941nd_v5_setup(void)
-{
- tl_ap123_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_v5_leds_gpio),
- tl_wr941nd_v5_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TL_WR841NV8_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr841n_v8_gpio_keys),
- tl_wr841n_v8_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR941ND_V5, "TL-WR941ND-v5", "TP-LINK TL-WR941N/ND v5",
- tl_wr941nd_v5_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c
deleted file mode 100644
index 304d8ff6e9..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c
+++ /dev/null
@@ -1,457 +0,0 @@
-/*
- * TP-LINK TL-WR840N v2/v3 / TL-WR841N/ND v9/v11 / TL-WR842N/ND v3
- *
- * Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net>
- * Copyright (C) 2016 Cezary Jackiewicz <cezary@eko.one.pl>
- * Copyright (C) 2016 Stijn Segers <francesco.borromini@gmail.com>
- * Copyright (C) 2017 Vaclav Svoboda <svoboda@neng.cz>
- * Copyright (C) 2017 Andrey Polischuk <androld.b@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR840NV2_GPIO_LED_SYSTEM 15
-#define TL_WR840NV2_GPIO_LED_WLAN 13
-#define TL_WR840NV2_GPIO_LED_WPS 3
-#define TL_WR840NV2_GPIO_LED_WAN 4
-#define TL_WR840NV2_GPIO_LED_LAN 16
-
-#define TL_WR840NV2_GPIO_BTN_RESET 12
-
-#define TL_WR841NV9_GPIO_LED_WLAN 13
-#define TL_WR841NV9_GPIO_LED_QSS 3
-#define TL_WR841NV9_GPIO_LED_WAN 4
-#define TL_WR841NV9_GPIO_LED_LAN1 16
-#define TL_WR841NV9_GPIO_LED_LAN2 15
-#define TL_WR841NV9_GPIO_LED_LAN3 14
-#define TL_WR841NV9_GPIO_LED_LAN4 11
-
-#define TL_WR841NV9_GPIO_BTN_RESET 12
-#define TL_WR841NV9_GPIO_BTN_WIFI 17
-
-#define TL_WR841NV11_GPIO_LED_SYSTEM 1
-#define TL_WR841NV11_GPIO_LED_QSS 3
-#define TL_WR841NV11_GPIO_LED_WAN 4
-#define TL_WR841NV11_GPIO_LED_WAN_STATUS 2
-#define TL_WR841NV11_GPIO_LED_WLAN 13
-#define TL_WR841NV11_GPIO_LED_LAN1 16
-#define TL_WR841NV11_GPIO_LED_LAN2 15
-#define TL_WR841NV11_GPIO_LED_LAN3 14
-#define TL_WR841NV11_GPIO_LED_LAN4 11
-
-#define TL_WR841NV11_GPIO_BTN_RESET 12
-#define TL_WR841NV11_GPIO_BTN_WIFI 17
-
-#define TL_WR842NV3_GPIO_LED_SYSTEM 2
-#define TL_WR842NV3_GPIO_LED_WLAN 3
-#define TL_WR842NV3_GPIO_LED_WAN_RED 4
-#define TL_WR842NV3_GPIO_LED_WAN_GREEN 11
-#define TL_WR842NV3_GPIO_LED_LAN1 12
-#define TL_WR842NV3_GPIO_LED_LAN2 13
-#define TL_WR842NV3_GPIO_LED_LAN3 14
-#define TL_WR842NV3_GPIO_LED_LAN4 15
-#define TL_WR842NV3_GPIO_LED_3G 16
-#define TL_WR842NV3_GPIO_LED_WPS 17
-
-#define TL_WR842NV3_GPIO_BTN_RESET 1
-#define TL_WR842NV3_GPIO_BTN_WIFI 0
-
-#define TL_WR740NV6_GPIO_LED_SYSTEM 1
-#define TL_WR740NV6_GPIO_LED_QSS 3
-#define TL_WR740NV6_GPIO_LED_WAN_ORANGE 2
-#define TL_WR740NV6_GPIO_LED_WAN_GREEN 4
-#define TL_WR740NV6_GPIO_LED_LAN1 16
-#define TL_WR740NV6_GPIO_LED_LAN2 15
-#define TL_WR740NV6_GPIO_LED_LAN3 14
-#define TL_WR740NV6_GPIO_LED_LAN4 11
-#define TL_WR740NV6_GPIO_LED_WLAN 13
-
-#define TL_WR740NV6_GPIO_BTN_RESET 12
-#define TL_WR740NV6_GPIO_BTN_WIFI 17
-
-#define TL_WR841NV9_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR841NV9_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr841n_v9_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr841n_v9_flash_data = {
- .part_probes = tl_wr841n_v9_part_probes,
-};
-
-static struct gpio_led tl_wr840n_v2_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:system",
- .gpio = TL_WR840NV2_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan",
- .gpio = TL_WR840NV2_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wps",
- .gpio = TL_WR840NV2_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wan",
- .gpio = TL_WR840NV2_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR840NV2_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr840n_v2_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR840NV2_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct gpio_led tl_wr841n_v9_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan1",
- .gpio = TL_WR841NV9_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan2",
- .gpio = TL_WR841NV9_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan3",
- .gpio = TL_WR841NV9_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan4",
- .gpio = TL_WR841NV9_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR841NV9_GPIO_LED_QSS,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wan",
- .gpio = TL_WR841NV9_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR841NV9_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr841n_v9_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR841NV9_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "WIFI button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR841NV9_GPIO_BTN_WIFI,
- .active_low = 1,
- }
-};
-
-static struct gpio_led tl_wr841n_v11_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan1",
- .gpio = TL_WR841NV9_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan2",
- .gpio = TL_WR841NV9_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan3",
- .gpio = TL_WR841NV9_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan4",
- .gpio = TL_WR841NV9_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR841NV9_GPIO_LED_QSS,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WR841NV11_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wan",
- .gpio = TL_WR841NV9_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wan_status",
- .gpio = TL_WR841NV11_GPIO_LED_WAN_STATUS,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR841NV9_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_led tl_wr842n_v3_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan1",
- .gpio = TL_WR842NV3_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan2",
- .gpio = TL_WR842NV3_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan3",
- .gpio = TL_WR842NV3_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan4",
- .gpio = TL_WR842NV3_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wan",
- .gpio = TL_WR842NV3_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "tp-link:red:wan",
- .gpio = TL_WR842NV3_GPIO_LED_WAN_RED,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR842NV3_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WR842NV3_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:3g",
- .gpio = TL_WR842NV3_GPIO_LED_3G,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wps",
- .gpio = TL_WR842NV3_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr842n_v3_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR842NV3_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "WIFI button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR842NV3_GPIO_BTN_WIFI,
- .active_low = 1,
- }
-};
-
-static struct gpio_led tl_wr740n_v6_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:lan1",
- .gpio = TL_WR740NV6_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan2",
- .gpio = TL_WR740NV6_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan3",
- .gpio = TL_WR740NV6_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "tp-link:green:lan4",
- .gpio = TL_WR740NV6_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "tp-link:green:system",
- .gpio = TL_WR740NV6_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR740NV6_GPIO_LED_QSS,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wan",
- .gpio = TL_WR740NV6_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "tp-link:orange:wan",
- .gpio = TL_WR740NV6_GPIO_LED_WAN_ORANGE,
- .active_low = 1,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR740NV6_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr740n_v6_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR740NV6_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "WIFI button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = TL_WR841NV9_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR740NV6_GPIO_BTN_WIFI,
- .active_low = 1,
- }
-};
-
-static void __init tl_ap143_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 tmpmac[ETH_ALEN];
-
- ath79_register_m25p80(&tl_wr841n_v9_flash_data);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- ath79_init_mac(tmpmac, mac, 0);
- ath79_register_wmac(ee, tmpmac);
-}
-
-
-static void __init tl_wr840n_v2_setup(void)
-{
- tl_ap143_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr840n_v2_leds_gpio),
- tl_wr840n_v2_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TL_WR841NV9_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr840n_v2_gpio_keys),
- tl_wr840n_v2_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR840N_V2, "TL-WR840N-v2", "TP-LINK TL-WR840N v2",
- tl_wr840n_v2_setup);
-
-MIPS_MACHINE(ATH79_MACH_TL_WR840N_V3, "TL-WR840N-v3", "TP-LINK TL-WR840N v3",
- tl_wr840n_v2_setup);
-
-static void __init tl_wr841n_v9_setup(void)
-{
- tl_ap143_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v9_leds_gpio),
- tl_wr841n_v9_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TL_WR841NV9_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr841n_v9_gpio_keys),
- tl_wr841n_v9_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR841N_V9, "TL-WR841N-v9", "TP-LINK TL-WR841N/ND v9",
- tl_wr841n_v9_setup);
-
-static void __init tl_wr841n_v11_setup(void)
-{
- tl_ap143_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v11_leds_gpio),
- tl_wr841n_v11_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TL_WR841NV9_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr841n_v9_gpio_keys),
- tl_wr841n_v9_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR841N_V11, "TL-WR841N-v11", "TP-LINK TL-WR841N/ND v11",
- tl_wr841n_v11_setup);
-
-static void __init tl_wr842n_v3_setup(void)
-{
- tl_ap143_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr842n_v3_leds_gpio),
- tl_wr842n_v3_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TL_WR841NV9_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr842n_v3_gpio_keys),
- tl_wr842n_v3_gpio_keys);
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR842N_V3, "TL-WR842N-v3", "TP-LINK TL-WR842N/ND v3",
- tl_wr842n_v3_setup);
-
-static void __init tl_wr740n_v6_setup(void)
-{
- tl_ap143_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr740n_v6_leds_gpio),
- tl_wr740n_v6_leds_gpio);
-
- ath79_register_gpio_keys_polled(1, TL_WR841NV9_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr740n_v6_gpio_keys),
- tl_wr740n_v6_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR740N_V6, "TL-WR740N-v6", "TP-LINK TL-WR740N/ND v6",
- tl_wr740n_v6_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n.c
deleted file mode 100644
index 11f853f057..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * TP-LINK TL-WR841N/ND v1 board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-dsa.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define TL_WR841ND_V1_GPIO_LED_SYSTEM 2
-#define TL_WR841ND_V1_GPIO_LED_QSS_GREEN 4
-#define TL_WR841ND_V1_GPIO_LED_QSS_RED 5
-
-#define TL_WR841ND_V1_GPIO_BTN_RESET 3
-#define TL_WR841ND_V1_GPIO_BTN_QSS 7
-
-#define TL_WR841ND_V1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL \
- (3 * TL_WR841ND_V1_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition tl_wr841n_v1_partitions[] = {
- {
- .name = "redboot",
- .offset = 0,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = 0x020000,
- .size = 0x140000,
- }, {
- .name = "rootfs",
- .offset = 0x160000,
- .size = 0x280000,
- }, {
- .name = "config",
- .offset = 0x3e0000,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x020000,
- .size = 0x3c0000,
- }
-};
-
-static struct flash_platform_data tl_wr841n_v1_flash_data = {
- .parts = tl_wr841n_v1_partitions,
- .nr_parts = ARRAY_SIZE(tl_wr841n_v1_partitions),
-};
-
-static struct gpio_led tl_wr841n_v1_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:system",
- .gpio = TL_WR841ND_V1_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:red:qss",
- .gpio = TL_WR841ND_V1_GPIO_LED_QSS_RED,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR841ND_V1_GPIO_LED_QSS_GREEN,
- }
-};
-
-static struct gpio_keys_button tl_wr841n_v1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR841ND_V1_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR841ND_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR841ND_V1_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static struct dsa_chip_data tl_wr841n_v1_dsa_chip = {
- .port_names[0] = "wan",
- .port_names[1] = "lan1",
- .port_names[2] = "lan2",
- .port_names[3] = "lan3",
- .port_names[4] = "lan4",
- .port_names[5] = "cpu",
-};
-
-static struct dsa_platform_data tl_wr841n_v1_dsa_data = {
- .nr_chips = 1,
- .chip = &tl_wr841n_v1_dsa_chip,
-};
-
-static void __init tl_wr841n_v1_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
- &tl_wr841n_v1_dsa_data);
-
- ath79_register_m25p80(&tl_wr841n_v1_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v1_leds_gpio),
- tl_wr841n_v1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WR841ND_V1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr841n_v1_gpio_keys),
- tl_wr841n_v1_gpio_keys);
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR841N_V1, "TL-WR841N-v1.5", "TP-LINK TL-WR841N v1",
- tl_wr841n_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr902ac-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr902ac-v1.c
deleted file mode 100644
index 8d2cea828a..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr902ac-v1.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * TP-Link TL-WR902AC v1 board support
- *
- * Copyright (C) 2017 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-
-#define TL_WR902AC_V1_GPIO_LED_INTERNET 12
-#define TL_WR902AC_V1_GPIO_LED_LAN 15
-#define TL_WR902AC_V1_GPIO_LED_POWER 13
-#define TL_WR902AC_V1_GPIO_LED_USB 4
-#define TL_WR902AC_V1_GPIO_LED_WLAN2G 11
-#define TL_WR902AC_V1_GPIO_LED_WPS 0
-
-#define TL_WR902AC_V1_GPIO_BTN_RESET 3
-#define TL_WR902AC_V1_GPIO_BTN_SW1 17
-#define TL_WR902AC_V1_GPIO_BTN_SW2 14
-#define TL_WR902AC_V1_GPIO_BTN_WPS 2
-
-#define TL_WR902AC_V1_GPIO_USB_POWER 1
-
-#define TL_WR902AC_V1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL \
- (3 * TL_WR902AC_V1_KEYS_POLL_INTERVAL)
-
-static struct gpio_led tl_wr902ac_v1_leds_gpio[] __initdata = {
- {
- .name = "tl-wr902ac-v1:green:internet",
- .gpio = TL_WR902AC_V1_GPIO_LED_INTERNET,
- .active_low = 1,
- }, {
- .name = "tl-wr902ac-v1:green:lan",
- .gpio = TL_WR902AC_V1_GPIO_LED_LAN,
- .active_low = 0,
- }, {
- .name = "tl-wr902ac-v1:green:power",
- .gpio = TL_WR902AC_V1_GPIO_LED_POWER,
- .active_low = 0,
- }, {
- .name = "tl-wr902ac-v1:green:usb",
- .gpio = TL_WR902AC_V1_GPIO_LED_USB,
- .active_low = 0,
- }, {
- .name = "tl-wr902ac-v1:green:wlan2g",
- .gpio = TL_WR902AC_V1_GPIO_LED_WLAN2G,
- .active_low = 1,
- }, {
- .name = "tl-wr902ac-v1:green:wps",
- .gpio = TL_WR902AC_V1_GPIO_LED_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_wr902ac_v1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR902AC_V1_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "sw1",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR902AC_V1_GPIO_BTN_SW1,
- .active_low = 1,
- }, {
- .desc = "sw2",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR902AC_V1_GPIO_BTN_SW2,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR902AC_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR902AC_V1_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init tl_wr902ac_v1_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1f750008);
-
- ath79_register_m25p80(NULL);
-
- ath79_setup_ar933x_phy4_switch(false, false);
- ath79_register_mdio(0, 0x0);
-
- /* LAN */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.speed = SPEED_100;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_register_eth(0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr902ac_v1_leds_gpio),
- tl_wr902ac_v1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WR902AC_V1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr902ac_v1_gpio_keys),
- tl_wr902ac_v1_gpio_keys);
-
- gpio_request_one(TL_WR902AC_V1_GPIO_USB_POWER,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-
- ath79_register_usb();
-
- ath79_register_wmac(art + 0x1000, mac);
-
- ap91_pci_init(art + 0x5000, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR902AC_V1, "TL-WR902AC-V1", "TP-LINK TL-WR902AC v1",
- tl_wr902ac_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr940n-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr940n-v4.c
deleted file mode 100644
index 9324b2b924..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr940n-v4.c
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * TP-LINK TL-WR940N v4 and v6 board support
- *
- * Copyright (C) 2016 David Lutz <kpanic@ff3l.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-
-#define TL_WR940N_V4_GPIO_LED_QSS 3
-#define TL_WR940N_V4_GPIO_LED_WAN 14
-#define TL_WR940N_V4_GPIO_LED_WAN_RED 15
-#define TL_WR940N_V4_GPIO_LED_LAN4 4
-#define TL_WR940N_V4_GPIO_LED_LAN3 18
-#define TL_WR940N_V4_GPIO_LED_LAN2 6
-#define TL_WR940N_V4_GPIO_LED_LAN1 8
-#define TL_WR940N_V4_GPIO_LED_WLAN 7
-#define TL_WR940N_V4_GPIO_LED_SYSTEM 5
-/* WR940N v6 specific GPIO*/
-#define TL_WR940N_V6_GPIO_LED_DIAG_ORANGE 15
-#define TL_WR940N_V6_GPIO_LED_WAN_BLUE 14
-
-#define TL_WR940N_V4_GPIO_BTN_RESET 1
-#define TL_WR940N_V4_GPIO_BTN_RFKILL 2
-
-#define TL_WR940N_KEYS_POLL_INTERVAL 20
-#define TL_WR940N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR940N_KEYS_POLL_INTERVAL)
-
-
-static struct gpio_led tl_wr940n_v4_leds_gpio[] __initdata = {
- {
- .name = "tp-link:blue:qss",
- .gpio = TL_WR940N_V4_GPIO_LED_QSS,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:wan",
- .gpio = TL_WR940N_V4_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:red:wan",
- .gpio = TL_WR940N_V4_GPIO_LED_WAN_RED,
- .active_low = 0,
- },
- {
- .name = "tp-link:blue:lan1",
- .gpio = TL_WR940N_V4_GPIO_LED_LAN1,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:lan2",
- .gpio = TL_WR940N_V4_GPIO_LED_LAN2,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:lan3",
- .gpio = TL_WR940N_V4_GPIO_LED_LAN3,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:lan4",
- .gpio = TL_WR940N_V4_GPIO_LED_LAN4,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:wlan",
- .gpio = TL_WR940N_V4_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:system",
- .gpio = TL_WR940N_V4_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr940n_v4_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR940N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR940N_V4_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = TL_WR940N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR940N_V4_GPIO_BTN_RFKILL,
- .active_low = 1,
- }
-};
-
-static struct gpio_led tl_wr940n_v6_leds_gpio[] __initdata = {
- {
- .name = "tp-link:blue:wan",
- .gpio = TL_WR940N_V6_GPIO_LED_WAN_BLUE,
- .active_low = 1,
- },
- {
- .name = "tp-link:orange:diag",
- .gpio = TL_WR940N_V6_GPIO_LED_DIAG_ORANGE,
- .active_low = 0,
- },
-};
-
-
-static const char *tl_wr940n_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr940n_flash_data = {
- .part_probes = tl_wr940n_part_probes,
-};
-
-
-static void __init tl_wr940n_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_wr940n_flash_data);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
-
- ath79_switch_data.phy4_mii_en = 1;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, mac);
-
-}
-
-static void __init tl_wr940n_v4_setup(void)
-{
- tl_wr940n_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr940n_v4_leds_gpio),
- tl_wr940n_v4_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WR940N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr940n_v4_gpio_keys),
- tl_wr940n_v4_gpio_keys);
-}
-
-static void __init tl_wr940n_v6_setup(void)
-{
- tl_wr940n_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr940n_v6_leds_gpio),
- tl_wr940n_v6_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WR940N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr940n_v4_gpio_keys),
- tl_wr940n_v4_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR940N_V4, "TL-WR940N-v4", "TP-LINK TL-WR940N v4",
- tl_wr940n_v4_setup);
-MIPS_MACHINE(ATH79_MACH_TL_WR940N_V6, "TL-WR940N-v6", "TP-LINK TL-WR940N v6",
- tl_wr940n_v6_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c
deleted file mode 100644
index 8c788e2841..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd-v6.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * TP-LINK TL-WR941N/ND v6 board support
- *
- * Copyright (C) 2015 Matthias Schiffer <mschiffer@universe-factory.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-
-#define TL_WR941ND_V6_GPIO_LED_QSS 3
-#define TL_WR941ND_V6_GPIO_LED_WAN 14
-#define TL_WR941ND_V6_GPIO_LED_WAN_RED 15
-#define TL_WR941ND_V6_GPIO_LED_LAN1 7
-#define TL_WR941ND_V6_GPIO_LED_LAN2 6
-#define TL_WR941ND_V6_GPIO_LED_LAN3 5
-#define TL_WR941ND_V6_GPIO_LED_LAN4 4
-#define TL_WR941ND_V6_GPIO_LED_WLAN 8
-#define TL_WR941ND_V6_GPIO_LED_SYSTEM 18
-
-#define TL_WR941ND_V6_GPIO_BTN_RESET 1
-#define TL_WR941ND_V6_GPIO_BTN_RFKILL 2
-
-#define TL_WR941ND_V6_KEYS_POLL_INTERVAL 20
-#define TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_V6_KEYS_POLL_INTERVAL)
-
-
-static struct gpio_led tl_wr941nd_v6_leds_gpio[] __initdata = {
- {
- .name = "tp-link:blue:qss",
- .gpio = TL_WR941ND_V6_GPIO_LED_QSS,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:wan",
- .gpio = TL_WR941ND_V6_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:red:wan",
- .gpio = TL_WR941ND_V6_GPIO_LED_WAN_RED,
- .active_low = 0,
- },
- {
- .name = "tp-link:blue:lan1",
- .gpio = TL_WR941ND_V6_GPIO_LED_LAN1,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:lan2",
- .gpio = TL_WR941ND_V6_GPIO_LED_LAN2,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:lan3",
- .gpio = TL_WR941ND_V6_GPIO_LED_LAN3,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:lan4",
- .gpio = TL_WR941ND_V6_GPIO_LED_LAN4,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:wlan",
- .gpio = TL_WR941ND_V6_GPIO_LED_WLAN,
- .active_low = 1,
- },
- {
- .name = "tp-link:blue:system",
- .gpio = TL_WR941ND_V6_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr941nd_v6_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR941ND_V6_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = TL_WR941ND_V6_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR941ND_V6_GPIO_BTN_RFKILL,
- .active_low = 1,
- }
-};
-
-
-static const char *tl_wr941n_v6_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr941n_v6_flash_data = {
- .part_probes = tl_wr941n_v6_part_probes,
-};
-
-
-static void __init tl_wr941nd_v6_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(&tl_wr941n_v6_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_v6_leds_gpio),
- tl_wr941nd_v6_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WR941ND_V6_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr941nd_v6_gpio_keys),
- tl_wr941nd_v6_gpio_keys);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1);
-
- ath79_switch_data.phy4_mii_en = 1;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, mac);
-
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR941ND_V6, "TL-WR941ND-v6", "TP-LINK TL-WR941N/ND v6",
- tl_wr941nd_v6_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd.c
deleted file mode 100644
index 1ddeec730e..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr941nd.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * TP-LINK TL-WR941ND board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-dsa.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TL_WR941ND_GPIO_LED_SYSTEM 2
-#define TL_WR941ND_GPIO_LED_QSS_RED 4
-#define TL_WR941ND_GPIO_LED_QSS_GREEN 5
-#define TL_WR941ND_GPIO_LED_WLAN 9
-
-#define TL_WR941ND_GPIO_BTN_RESET 3
-#define TL_WR941ND_GPIO_BTN_QSS 7
-
-#define TL_WR941ND_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TL_WR941ND_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR941ND_KEYS_POLL_INTERVAL)
-
-static const char *tl_wr941nd_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data tl_wr941nd_flash_data = {
- .part_probes = tl_wr941nd_part_probes,
-};
-
-static struct gpio_led tl_wr941nd_leds_gpio[] __initdata = {
- {
- .name = "tp-link:green:system",
- .gpio = TL_WR941ND_GPIO_LED_SYSTEM,
- .active_low = 1,
- }, {
- .name = "tp-link:red:qss",
- .gpio = TL_WR941ND_GPIO_LED_QSS_RED,
- }, {
- .name = "tp-link:green:qss",
- .gpio = TL_WR941ND_GPIO_LED_QSS_GREEN,
- }, {
- .name = "tp-link:green:wlan",
- .gpio = TL_WR941ND_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button tl_wr941nd_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR941ND_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "qss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = TL_WR941ND_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR941ND_GPIO_BTN_QSS,
- .active_low = 1,
- }
-};
-
-static struct dsa_chip_data tl_wr941nd_dsa_chip = {
- .port_names[0] = "wan",
- .port_names[1] = "lan1",
- .port_names[2] = "lan2",
- .port_names[3] = "lan3",
- .port_names[4] = "lan4",
- .port_names[5] = "cpu",
-};
-
-static struct dsa_platform_data tl_wr941nd_dsa_data = {
- .nr_chips = 1,
- .chip = &tl_wr941nd_dsa_chip,
-};
-
-static void __init tl_wr941nd_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_dsa(&ath79_eth0_device.dev, &ath79_mdio0_device.dev,
- &tl_wr941nd_dsa_data);
-
- ath79_register_m25p80(&tl_wr941nd_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr941nd_leds_gpio),
- tl_wr941nd_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WR941ND_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr941nd_gpio_keys),
- tl_wr941nd_gpio_keys);
- ath79_register_wmac(eeprom, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND",
- tl_wr941nd_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr942n-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr942n-v1.c
deleted file mode 100644
index 32e2bc9521..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr942n-v1.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * TP-Link TL-WR942N(RU) v1 board support
- *
- * Copyright (C) 2017 Sergey Studzinski <serguzhg@gmail.com>
- * Thanks to Henryk Heisig <hyniu@o2.pl>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/74x164.h>
-
-#include "common.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "nvram.h"
-
-#define TL_WR942N_V1_KEYS_POLL_INTERVAL 20
-#define TL_WR942N_V1_KEYS_DEBOUNCE_INTERVAL \
- (3 * TL_WR942N_V1_KEYS_POLL_INTERVAL)
-
-#define TL_WR942N_V1_GPIO_BTN_RESET 1
-#define TL_WR942N_V1_GPIO_BTN_RFKILL 2
-
-#define TL_WR942N_V1_GPIO_UART_TX 4
-#define TL_WR942N_V1_GPIO_UART_RX 5
-
-#define TL_WR942N_V1_GPIO_LED_USB2 14
-#define TL_WR942N_V1_GPIO_LED_USB1 15
-
-#define TL_WR942N_V1_GPIO_SHIFT_OE 16
-#define TL_WR942N_V1_GPIO_SHIFT_SER 17
-#define TL_WR942N_V1_GPIO_SHIFT_SRCLK 18
-#define TL_WR942N_V1_GPIO_SHIFT_SRCLR 19
-#define TL_WR942N_V1_GPIO_SHIFT_RCLK 20
-#define TL_WR942N_V1_GPIO_LED_WPS 21
-#define TL_WR942N_V1_GPIO_LED_STATUS 22
-
-#define TL_WR942N_V1_74HC_GPIO_BASE 32
-#define TL_WR942N_V1_74HC_GPIO_LED_LAN4 (TL_WR942N_V1_74HC_GPIO_BASE + 0)
-#define TL_WR942N_V1_74HC_GPIO_LED_LAN3 (TL_WR942N_V1_74HC_GPIO_BASE + 1)
-#define TL_WR942N_V1_74HC_GPIO_LED_LAN2 (TL_WR942N_V1_74HC_GPIO_BASE + 2)
-#define TL_WR942N_V1_74HC_GPIO_LED_LAN1 (TL_WR942N_V1_74HC_GPIO_BASE + 3)
-#define TL_WR942N_V1_74HC_GPIO_LED_WAN_GREEN (TL_WR942N_V1_74HC_GPIO_BASE + 4)
-#define TL_WR942N_V1_74HC_GPIO_LED_WAN_AMBER (TL_WR942N_V1_74HC_GPIO_BASE + 5)
-#define TL_WR942N_V1_74HC_GPIO_LED_WLAN (TL_WR942N_V1_74HC_GPIO_BASE + 6)
-#define TL_WR942N_V1_74HC_GPIO_HUB_RESET (TL_WR942N_V1_74HC_GPIO_BASE + 7) /* from u-boot sources */
-
-#define TL_WR942N_V1_SSR_BIT_0 0
-#define TL_WR942N_V1_SSR_BIT_1 1
-#define TL_WR942N_V1_SSR_BIT_2 2
-#define TL_WR942N_V1_SSR_BIT_3 3
-#define TL_WR942N_V1_SSR_BIT_4 4
-#define TL_WR942N_V1_SSR_BIT_5 5
-#define TL_WR942N_V1_SSR_BIT_6 6
-#define TL_WR942N_V1_SSR_BIT_7 7
-
-#define TL_WR942N_V1_WMAC_CALDATA_OFFSET 0x1000
-#define TL_WR942N_V1_DEFAULT_MAC_ADDR 0x1fe40008
-#define TL_WR942N_V1_DEFAULT_MAC_SIZE 0x200
-
-#define GPIO_IN_ENABLE0_UART_SIN_LSB 8
-#define GPIO_IN_ENABLE0_UART_SIN_MASK 0x0000ff00
-
-static struct gpio_led tl_wr942n_v1_leds_gpio[] __initdata = {
- {
- .name = "tl-wr942n-v1:green:status",
- .gpio = TL_WR942N_V1_GPIO_LED_STATUS,
- .active_low = 1,
- }, {
- .name = "tl-wr942n-v1:green:wlan",
- .gpio = TL_WR942N_V1_74HC_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "tl-wr942n-v1:green:lan1",
- .gpio = TL_WR942N_V1_74HC_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "tl-wr942n-v1:green:lan2",
- .gpio = TL_WR942N_V1_74HC_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "tl-wr942n-v1:green:lan3",
- .gpio = TL_WR942N_V1_74HC_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "tl-wr942n-v1:green:lan4",
- .gpio = TL_WR942N_V1_74HC_GPIO_LED_LAN4,
- .active_low = 1,
- }, {
- .name = "tl-wr942n-v1:green:wan",
- .gpio = TL_WR942N_V1_74HC_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "tl-wr942n-v1:amber:wan",
- .gpio = TL_WR942N_V1_74HC_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- }, {
- .name = "tl-wr942n-v1:green:wps",
- .gpio = TL_WR942N_V1_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "tl-wr942n-v1:green:usb1",
- .gpio = TL_WR942N_V1_GPIO_LED_USB1,
- .active_low = 1,
- }, {
- .name = "tl-wr942n-v1:green:usb2",
- .gpio = TL_WR942N_V1_GPIO_LED_USB2,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button tl_wr942n_v1_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TL_WR942N_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR942N_V1_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = TL_WR942N_V1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TL_WR942N_V1_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
-};
-
-static struct spi_gpio_platform_data tl_wr942n_v1_spi_data = {
- .sck = TL_WR942N_V1_GPIO_SHIFT_SRCLK,
- .miso = SPI_GPIO_NO_MISO,
- .mosi = TL_WR942N_V1_GPIO_SHIFT_SER,
- .num_chipselect = 1,
-};
-
-static u8 tl_wr942n_v1_ssr_initdata[] = {
- BIT(TL_WR942N_V1_SSR_BIT_7) |
- BIT(TL_WR942N_V1_SSR_BIT_6) |
- BIT(TL_WR942N_V1_SSR_BIT_5) |
- BIT(TL_WR942N_V1_SSR_BIT_4) |
- BIT(TL_WR942N_V1_SSR_BIT_3) |
- BIT(TL_WR942N_V1_SSR_BIT_2) |
- BIT(TL_WR942N_V1_SSR_BIT_1) |
- BIT(TL_WR942N_V1_SSR_BIT_0)
-};
-
-static struct gen_74x164_chip_platform_data tl_wr942n_v1_ssr_data = {
- .base = TL_WR942N_V1_74HC_GPIO_BASE,
- .num_registers = ARRAY_SIZE(tl_wr942n_v1_ssr_initdata),
- .init_data = tl_wr942n_v1_ssr_initdata,
-};
-
-static struct platform_device tl_wr942n_v1_spi_device = {
- .name = "spi_gpio",
- .id = 1,
- .dev = {
- .platform_data = &tl_wr942n_v1_spi_data,
- },
-};
-
-static struct spi_board_info tl_wr942n_v1_spi_info[] = {
- {
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 10000000,
- .modalias = "74x164",
- .platform_data = &tl_wr942n_v1_ssr_data,
- .controller_data = (void *) TL_WR942N_V1_GPIO_SHIFT_RCLK,
- },
-};
-
-static void tl_wr942n_v1_get_mac(const char *name, char *mac)
-{
- u8 *nvram = (u8 *) KSEG1ADDR(TL_WR942N_V1_DEFAULT_MAC_ADDR);
- int err;
-
- err = ath79_nvram_parse_mac_addr(nvram, TL_WR942N_V1_DEFAULT_MAC_SIZE,
- name, mac);
-
- if (err)
- pr_err("no MAC address found for %s\n", name);
-}
-
-static void __init tl_wr942n_v1_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 tmpmac[ETH_ALEN];
- void __iomem *base;
- u32 t;
-
- ath79_register_m25p80(NULL);
-
- spi_register_board_info(tl_wr942n_v1_spi_info,
- ARRAY_SIZE(tl_wr942n_v1_spi_info));
- platform_device_register(&tl_wr942n_v1_spi_device);
-
- /* Check inherited UART RX GPIO definition */
- base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
-
- t = __raw_readl(base + QCA956X_GPIO_REG_IN_ENABLE0);
- if (((t & GPIO_IN_ENABLE0_UART_SIN_MASK)
- >> GPIO_IN_ENABLE0_UART_SIN_LSB) == TL_WR942N_V1_GPIO_LED_USB1) {
- pr_warn("Active UART detected on USBLED's GPIOs!\n");
-
- tl_wr942n_v1_leds_gpio[9].gpio = TL_WR942N_V1_GPIO_UART_TX;
- tl_wr942n_v1_leds_gpio[10].gpio = TL_WR942N_V1_GPIO_UART_RX;
- }
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr942n_v1_leds_gpio),
- tl_wr942n_v1_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, TL_WR942N_V1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tl_wr942n_v1_gpio_keys),
- tl_wr942n_v1_gpio_keys);
-
- tl_wr942n_v1_get_mac("MAC:", tmpmac);
-
- /* swap PHYs */
- ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
- QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- /* WAN port */
- ath79_init_mac(ath79_eth0_data.mac_addr, tmpmac, 1);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- /* swaped PHYs */
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_register_eth(0);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_init_mac(ath79_eth1_data.mac_addr, tmpmac, 0);
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- /* swaped PHYs */
- ath79_switch_data.phy_poll_mask |= BIT(0);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-
- ath79_register_wmac(art + TL_WR942N_V1_WMAC_CALDATA_OFFSET, tmpmac);
-
- ath79_register_usb();
-
- gpio_request_one(TL_WR942N_V1_74HC_GPIO_HUB_RESET,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
-
- gpio_request_one(TL_WR942N_V1_GPIO_SHIFT_OE,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "LED control");
-
- gpio_request_one(TL_WR942N_V1_GPIO_SHIFT_SRCLR,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "LED reset");
-}
-
-MIPS_MACHINE(ATH79_MACH_TL_WR942N_V1, "TL-WR942N-V1", "TP-LINK TL-WR942N v1",
- tl_wr942n_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ts-d084.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ts-d084.c
deleted file mode 100644
index 38786fdeda..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ts-d084.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * PISEN TS-D084 board support
- * Based on TP-LINK TL-WR703N/TL-MR10U board support
- *
- * Copyright (C) 2011 dongyuqi <729650915@qq.com>
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TS_D084_GPIO_LED_SYSTEM 0
-#define TS_D084_GPIO_BTN_RESET 12
-
-
-#define TS_D084_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TS_D084_KEYS_DEBOUNCE_INTERVAL (3 * TS_D084_KEYS_POLL_INTERVAL)
-
-static const char *ts_d084_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data ts_d084_flash_data = {
- .part_probes = ts_d084_part_probes,
-};
-
-static struct gpio_led ts_d084_leds_gpio[] __initdata = {
- {
- .name = "ts-d084:blue:system",
- .gpio = TS_D084_GPIO_LED_SYSTEM,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button ts_d084_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TS_D084_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TS_D084_GPIO_BTN_RESET,
- .active_low = 0,
- }
-};
-
-static void __init ts_d084_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- /* disable PHY_SWAP and PHY_ADDR_SWAP bits */
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_m25p80(&ts_d084_flash_data);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ts_d084_leds_gpio),
- ts_d084_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TS_D084_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ts_d084_gpio_keys),
- ts_d084_gpio_keys);
-
- ath79_register_usb();
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_TS_D084, "TS-D084", "PISEN TS-D084",
- ts_d084_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tube2h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tube2h.c
deleted file mode 100644
index 06b3616536..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tube2h.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * ALFA NETWORK Tube2H board support
- *
- * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define TUBE2H_GPIO_LED_SIGNAL4 0
-#define TUBE2H_GPIO_LED_SIGNAL3 1
-#define TUBE2H_GPIO_LED_SIGNAL2 13
-#define TUBE2H_GPIO_LED_LAN 17
-#define TUBE2H_GPIO_LED_SIGNAL1 27
-#define TUBE2H_GPIO_EXT_LNA 28
-
-#define TUBE2H_GPIO_WDT_EN 22
-#define TUBE2H_GPIO_WDT_IN 18
-
-#define TUBE2H_GPIO_BTN_RESET 12
-
-#define TUBE2H_KEYS_POLL_INTERVAL 20 /* msecs */
-#define TUBE2H_KEYS_DEBOUNCE_INTERVAL (3 * TUBE2H_KEYS_POLL_INTERVAL)
-
-#define TUBE2H_ART_ADDRESS 0x1fff0000
-#define TUBE2H_LAN_MAC_OFFSET 0x06
-#define TUBE2H_CALDATA_OFFSET 0x1000
-
-static struct gpio_led tube2h_leds_gpio[] __initdata = {
- {
- .name = "alfa:blue:lan",
- .gpio = TUBE2H_GPIO_LED_LAN,
- .active_low = 1,
- },
- {
- .name = "alfa:red:signal1",
- .gpio = TUBE2H_GPIO_LED_SIGNAL1,
- .active_low = 1,
- },
- {
- .name = "alfa:orange:signal2",
- .gpio = TUBE2H_GPIO_LED_SIGNAL2,
- .active_low = 0,
- },
- {
- .name = "alfa:green:signal3",
- .gpio = TUBE2H_GPIO_LED_SIGNAL3,
- .active_low = 0,
- },
- {
- .name = "alfa:green:signal4",
- .gpio = TUBE2H_GPIO_LED_SIGNAL4,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button tube2h_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = TUBE2H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = TUBE2H_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init tube2h_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(TUBE2H_ART_ADDRESS);
- u32 t;
-
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_JTAG_DISABLE |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- /* Ensure that GPIO26 and GPIO27 are controllable by software */
- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
- t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
- ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
-
- gpio_request_one(TUBE2H_GPIO_EXT_LNA,
- GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "external LNA0");
-
- gpio_request_one(TUBE2H_GPIO_WDT_IN,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "WDT input");
-
- gpio_request_one(TUBE2H_GPIO_WDT_EN,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
- "WDT enable");
-
- ath79_register_wmac(art + TUBE2H_CALDATA_OFFSET, NULL);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(tube2h_leds_gpio),
- tube2h_leds_gpio);
- ath79_register_gpio_keys_polled(-1, TUBE2H_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(tube2h_gpio_keys),
- tube2h_gpio_keys);
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + TUBE2H_LAN_MAC_OFFSET, 0);
- ath79_register_mdio(0, 0x0);
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_TUBE2H, "TUBE2H", "ALFA NETWORK Tube2H",
- tube2h_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
deleted file mode 100644
index 09a0bba867..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * Ubiquiti UniFi AC (LITE) board support
- *
- * Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
- *
- * Derived from: mach-ubnt-xm.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/etherdevice.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/irq.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include <linux/platform_data/phy-at803x.h>
-#include <linux/ar8216_platform.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-
-#define UNIFIAC_KEYS_POLL_INTERVAL 20
-#define UNIFIAC_KEYS_DEBOUNCE_INTERVAL (3 * UNIFIAC_KEYS_POLL_INTERVAL)
-
-#define UNIFIAC_GPIO_LED_WHITE 7
-#define UNIFIAC_GPIO_LED_BLUE 8
-
-#define UNIFIAC_GPIO_BTN_RESET 2
-
-#define UNIFIAC_MAC0_OFFSET 0x0000
-#define UNIFIAC_WMAC_CALDATA_OFFSET 0x1000
-#define UNIFIAC_PCI_CALDATA_OFFSET 0x5000
-
-
-static struct flash_platform_data ubnt_unifiac_flash_data = {
- /* mx25l12805d and mx25l12835f have the same JEDEC ID */
- .type = "mx25l12805d",
-};
-
-static struct gpio_led ubnt_unifiac_leds_gpio[] __initdata = {
- {
- .name = "ubnt:white:dome",
- .gpio = UNIFIAC_GPIO_LED_WHITE,
- .active_low = 0,
- }, {
- .name = "ubnt:blue:dome",
- .gpio = UNIFIAC_GPIO_LED_BLUE,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button ubnt_unifiac_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = UNIFIAC_KEYS_DEBOUNCE_INTERVAL,
- .gpio = UNIFIAC_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init ubnt_unifiac_lite_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(&ubnt_unifiac_flash_data);
-
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- eeprom + UNIFIAC_MAC0_OFFSET, 0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_pll_data.pll_10 = 0x00001313;
-
- ath79_register_mdio(0, ~BIT(4));
- ath79_register_eth(0);
-
-
- ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL);
-
-
- ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL);
-
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio),
- ubnt_unifiac_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_unifiac_gpio_keys),
- ubnt_unifiac_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_LITE, "UBNT-UF-AC-LITE",
- "Ubiquiti UniFi-AC-LITE/MESH", ubnt_unifiac_lite_setup);
-
-static struct ar8327_pad_cfg ubnt_unifiac_pro_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data ubnt_unifiac_pro_ar8327_data = {
- .pad0_cfg = &ubnt_unifiac_pro_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-
-static struct mdio_board_info ubnt_unifiac_pro_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &ubnt_unifiac_pro_ar8327_data,
- },
-};
-
-static void __init ubnt_unifiac_pro_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(&ubnt_unifiac_flash_data);
-
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- eeprom + UNIFIAC_MAC0_OFFSET, 0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_data.phy_mask = BIT(0);
-
- mdiobus_register_board_info(ubnt_unifiac_pro_mdio0_info,
- ARRAY_SIZE(ubnt_unifiac_pro_mdio0_info));
-
- ath79_register_mdio(0, 0x00);
- ath79_register_eth(0);
-
-
- ath79_register_usb();
-
-
- ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL);
-
-
- ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL);
-
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio),
- ubnt_unifiac_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_unifiac_gpio_keys),
- ubnt_unifiac_gpio_keys);
-}
-
-
-MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_PRO, "UBNT-UF-AC-PRO",
- "Ubiquiti UniFi-AC-PRO/MESH-PRO", ubnt_unifiac_pro_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-xm.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-xm.c
deleted file mode 100644
index 6ceb91efff..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-xm.c
+++ /dev/null
@@ -1,781 +0,0 @@
-/*
- * Ubiquiti Networks XM (rev 1.0) board support
- *
- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
- *
- * Derived from: mach-pb44.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/etherdevice.h>
-#include <linux/ar8216_platform.h>
-#include <linux/platform_data/phy-at803x.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/irq.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include <linux/platform_data/phy-at803x.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define UBNT_XM_GPIO_LED_L1 0
-#define UBNT_XM_GPIO_LED_L2 1
-#define UBNT_XM_GPIO_LED_L3 11
-#define UBNT_XM_GPIO_LED_L4 7
-
-#define UBNT_XM_GPIO_BTN_RESET 12
-
-#define UBNT_XM_KEYS_POLL_INTERVAL 20
-#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
-
-#define UBNT_XM_EEPROM_ADDR 0x1fff1000
-
-static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
- {
- .name = "ubnt:red:link1",
- .gpio = UBNT_XM_GPIO_LED_L1,
- .active_low = 0,
- }, {
- .name = "ubnt:orange:link2",
- .gpio = UBNT_XM_GPIO_LED_L2,
- .active_low = 0,
- }, {
- .name = "ubnt:green:link3",
- .gpio = UBNT_XM_GPIO_LED_L3,
- .active_low = 0,
- }, {
- .name = "ubnt:green:link4",
- .gpio = UBNT_XM_GPIO_LED_L4,
- .active_low = 0,
- },
-};
-
-static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
- .gpio = UBNT_XM_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-#define UBNT_M_WAN_PHYMASK BIT(4)
-
-static void __init ubnt_xm_init(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR);
- u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
- ubnt_xm_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_xm_gpio_keys),
- ubnt_xm_gpio_keys);
-
- ath79_register_m25p80(NULL);
- ap91_pci_init(eeprom, NULL);
-
- ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_eth1_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_XM,
- "UBNT-XM",
- "Ubiquiti Networks XM (rev 1.0) board",
- ubnt_xm_init);
-
-MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
- ubnt_xm_init);
-
-static void __init ubnt_rocket_m_setup(void)
-{
- ubnt_xm_init();
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
- ubnt_rocket_m_setup);
-
-static void __init ubnt_nano_m_setup(void)
-{
- ubnt_xm_init();
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",
- ubnt_nano_m_setup);
-
-static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = {
- {
- .name = "ubnt:green:globe",
- .gpio = 0,
- .active_low = 1,
- }, {
- .name = "ubnt:green:power",
- .gpio = 11,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }
-};
-
-static void __init ubnt_airrouter_setup(void)
-{
- u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(NULL);
- ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1);
-
- ath79_register_eth(1);
- ath79_register_eth(0);
- ath79_register_usb();
-
- ap91_pci_init(ee, NULL);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio),
- ubnt_airrouter_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_xm_gpio_keys),
- ubnt_xm_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter",
- ubnt_airrouter_setup);
-
-static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = {
- {
- .name = "ubnt:orange:dome",
- .gpio = 1,
- .active_low = 0,
- }, {
- .name = "ubnt:green:dome",
- .gpio = 0,
- .active_low = 0,
- }
-};
-
-static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = {
- {
- .name = "ubnt:orange:front",
- .gpio = 1,
- .active_low = 0,
- }, {
- .name = "ubnt:green:front",
- .gpio = 0,
- .active_low = 0,
- }
-};
-
-static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = {
- {
- .name = "ubnt:white:front",
- .gpio = 1,
- .active_low = 0,
- }, {
- .name = "ubnt:blue:front",
- .gpio = 0,
- .active_low = 0,
- }
-};
-
-
-static void __init ubnt_unifi_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_register_eth(0);
-
- ap91_pci_init(ee, NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio),
- ubnt_unifi_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_xm_gpio_keys),
- ubnt_xm_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi",
- ubnt_unifi_setup);
-
-
-#define UBNT_UNIFIOD_PRI_PHYMASK BIT(4)
-#define UBNT_UNIFIOD_2ND_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
-
-static void __init ubnt_unifi_outdoor_setup(void)
-{
- u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
- UBNT_UNIFIOD_2ND_PHYMASK));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ap91_pci_init(ee, NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio),
- ubnt_unifi_outdoor_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_xm_gpio_keys),
- ubnt_xm_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20",
- "Ubiquiti UniFiAP Outdoor",
- ubnt_unifi_outdoor_setup);
-
-
-static void __init ubnt_unifi_outdoor_plus_setup(void)
-{
- u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK |
- UBNT_UNIFIOD_2ND_PHYMASK));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0);
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ap9x_pci_get_wmac_data(0)->ubnt_hsr = true;
- ap91_pci_init(ee, NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio),
- ubnt_unifi_outdoor_plus_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_xm_gpio_keys),
- ubnt_xm_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP",
- "Ubiquiti UniFiAP Outdoor+",
- ubnt_unifi_outdoor_plus_setup);
-
-
-static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = {
- {
- .name = "ubnt:white:dome",
- .gpio = 12,
- }, {
- .name = "ubnt:blue:dome",
- .gpio = 13,
- }
-};
-
-static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 17,
- .active_low = 1,
- }
-};
-
-static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data uap_pro_ar8327_data = {
- .pad0_cfg = &uap_pro_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info uap_pro_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &uap_pro_ar8327_data,
- },
-};
-
-#define UAP_PRO_MAC0_OFFSET 0x0000
-#define UAP_PRO_MAC1_OFFSET 0x0006
-#define UAP_PRO_WMAC_CALDATA_OFFSET 0x1000
-#define UAP_PRO_PCI_CALDATA_OFFSET 0x5000
-
-static void __init ubnt_uap_pro_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds),
- ubnt_uap_pro_gpio_leds);
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(uap_pro_gpio_keys),
- uap_pro_gpio_keys);
-
- ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
- ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
-
- ath79_register_mdio(0, 0x0);
- mdiobus_register_board_info(uap_pro_mdio0_info,
- ARRAY_SIZE(uap_pro_mdio0_info));
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
- ath79_init_mac(ath79_eth0_data.mac_addr,
- eeprom + UAP_PRO_MAC0_OFFSET, 0);
-
- /* GMAC0 is connected to an AR8327 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro",
- ubnt_uap_pro_setup);
-
-#define UBNT_XW_GPIO_LED_L1 11
-#define UBNT_XW_GPIO_LED_L2 16
-#define UBNT_XW_GPIO_LED_L3 13
-#define UBNT_XW_GPIO_LED_L4 14
-
-static struct gpio_led ubnt_xw_leds_gpio[] __initdata = {
- {
- .name = "ubnt:red:link1",
- .gpio = UBNT_XW_GPIO_LED_L1,
- .active_low = 1,
- }, {
- .name = "ubnt:orange:link2",
- .gpio = UBNT_XW_GPIO_LED_L2,
- .active_low = 1,
- }, {
- .name = "ubnt:green:link3",
- .gpio = UBNT_XW_GPIO_LED_L3,
- .active_low = 1,
- }, {
- .name = "ubnt:green:link4",
- .gpio = UBNT_XW_GPIO_LED_L4,
- .active_low = 1,
- },
-};
-
-#define UBNT_ROCKET_TI_GPIO_LED_L1 16
-#define UBNT_ROCKET_TI_GPIO_LED_L2 17
-#define UBNT_ROCKET_TI_GPIO_LED_L3 18
-#define UBNT_ROCKET_TI_GPIO_LED_L4 19
-#define UBNT_ROCKET_TI_GPIO_LED_L5 20
-#define UBNT_ROCKET_TI_GPIO_LED_L6 21
-static struct gpio_led ubnt_rocket_ti_leds_gpio[] __initdata = {
- {
- .name = "ubnt:green:link1",
- .gpio = UBNT_ROCKET_TI_GPIO_LED_L1,
- .active_low = 1,
- }, {
- .name = "ubnt:green:link2",
- .gpio = UBNT_ROCKET_TI_GPIO_LED_L2,
- .active_low = 1,
- }, {
- .name = "ubnt:green:link3",
- .gpio = UBNT_ROCKET_TI_GPIO_LED_L3,
- .active_low = 1,
- }, {
- .name = "ubnt:green:link4",
- .gpio = UBNT_ROCKET_TI_GPIO_LED_L4,
- .active_low = 0,
- }, {
- .name = "ubnt:green:link5",
- .gpio = UBNT_ROCKET_TI_GPIO_LED_L5,
- .active_low = 0,
- }, {
- .name = "ubnt:green:link6",
- .gpio = UBNT_ROCKET_TI_GPIO_LED_L6,
- .active_low = 0,
- },
-};
-
-static void __init ubnt_xw_init(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
- ubnt_xw_leds_gpio);
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_xm_gpio_keys),
- ubnt_xm_gpio_keys);
-
- ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
- ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
-
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE);
- ath79_init_mac(ath79_eth0_data.mac_addr,
- eeprom + UAP_PRO_MAC0_OFFSET, 0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-}
-
-static void __init ubnt_nano_m_xw_setup(void)
-{
- ubnt_xw_init();
-
- /* GMAC0 is connected to an AR8326 switch */
- ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5)));
- ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5));
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_register_eth(0);
-}
-
-static struct at803x_platform_data ubnt_loco_m_xw_at803x_data = {
- .has_reset_gpio = 1,
- .reset_gpio = 0,
-};
-
-static struct mdio_board_info ubnt_loco_m_xw_mdio_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 1,
- .platform_data = &ubnt_loco_m_xw_at803x_data,
- },
-};
-
-static void __init ubnt_loco_m_xw_setup(void)
-{
- ubnt_xw_init();
-
- mdiobus_register_board_info(ubnt_loco_m_xw_mdio_info,
- ARRAY_SIZE(ubnt_loco_m_xw_mdio_info));
-
- ath79_register_mdio(0, ~BIT(1));
- ath79_eth0_data.phy_mask = BIT(1);
- ath79_register_eth(0);
-}
-
-#define UBNT_LBE_M5_GPIO_LED_LAN 13
-#define UBNT_LBE_M5_GPIO_LED_WLAN 14
-#define UBNT_LBE_M5_GPIO_LED_SYS 16
-
-static struct gpio_led ubnt_lbe_m5_leds_gpio[] __initdata = {
- {
- .name = "ubnt:green:lan",
- .gpio = UBNT_LBE_M5_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "ubnt:green:wlan",
- .gpio = UBNT_LBE_M5_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "ubnt:green:sys",
- .gpio = UBNT_LBE_M5_GPIO_LED_SYS,
- .active_low = 1,
- },
-};
-
-static void __init ubnt_lbe_m5_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
- ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_lbe_m5_leds_gpio),
- ubnt_lbe_m5_leds_gpio);
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_xm_gpio_keys),
- ubnt_xm_gpio_keys);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 |
- AR934X_ETH_CFG_MII_GMAC0_SLAVE);
- ath79_init_mac(ath79_eth0_data.mac_addr,
- eeprom + UAP_PRO_MAC0_OFFSET, 0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- gpio_request_one(0, GPIOF_OUT_INIT_LOW | GPIOF_ACTIVE_LOW |
- GPIOF_EXPORT_DIR_FIXED, "SPI nWP");
-
- mdiobus_register_board_info(ubnt_loco_m_xw_mdio_info,
- ARRAY_SIZE(ubnt_loco_m_xw_mdio_info));
-
- ath79_register_mdio(0, ~BIT(1));
- ath79_eth0_data.phy_mask = BIT(1);
- ath79_register_eth(0);
-}
-
-static void __init ubnt_rocket_m_xw_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio),
- ubnt_xw_leds_gpio);
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_xm_gpio_keys),
- ubnt_xm_gpio_keys);
-
- ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
- ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
- ath79_init_mac(ath79_eth0_data.mac_addr,
- eeprom + UAP_PRO_MAC0_OFFSET, 0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_register_mdio(0, ~BIT(4));
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-}
-
-static struct at803x_platform_data ubnt_rocket_m_ti_at803_data = {
- .disable_smarteee = 1,
- .enable_rgmii_rx_delay = 1,
- .enable_rgmii_tx_delay = 1,
-};
-static struct mdio_board_info ubnt_rocket_m_ti_mdio_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 4,
- .platform_data = &ubnt_rocket_m_ti_at803_data,
- },
-};
-
-static void __init ubnt_rocket_m_ti_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rocket_ti_leds_gpio),
- ubnt_rocket_ti_leds_gpio);
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_xm_gpio_keys),
- ubnt_xm_gpio_keys);
-
- ap91_pci_init(eeprom + 0x1000, NULL);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
- ath79_setup_ar934x_eth_rx_delay(3, 3);
- ath79_init_mac(ath79_eth0_data.mac_addr,
- eeprom + UAP_PRO_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr,
- eeprom + UAP_PRO_MAC1_OFFSET, 0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
-
- mdiobus_register_board_info(ubnt_rocket_m_ti_mdio_info,
- ARRAY_SIZE(ubnt_rocket_m_ti_mdio_info));
- ath79_register_mdio(0, 0x0);
-
-
- ath79_eth0_data.phy_mask = BIT(4);
- /* read out from vendor */
- ath79_eth0_pll_data.pll_1000 = 0x2000000;
- ath79_eth0_pll_data.pll_10 = 0x1313;
- ath79_register_eth(0);
-
- ath79_register_mdio(1, 0x0);
- ath79_eth1_data.phy_mask = BIT(3);
- ath79_register_eth(1);
-}
-
-
-MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW",
- ubnt_nano_m_xw_setup);
-
-MIPS_MACHINE(ATH79_MACH_UBNT_LBE_M5, "UBNT-LBE-M5", "Ubiquiti Litebeam M5",
- ubnt_lbe_m5_setup);
-
-MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW",
- ubnt_loco_m_xw_setup);
-
-MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_XW, "UBNT-RM-XW", "Ubiquiti Rocket M XW",
- ubnt_rocket_m_xw_setup);
-
-MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M_XW, "UBNT-BM-XW", "Ubiquiti Bullet M XW",
- ubnt_rocket_m_xw_setup);
-
-MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_TI, "UBNT-RM-TI", "Ubiquiti Rocket M TI",
- ubnt_rocket_m_ti_setup);
-
-static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = {
- {
- .name = "ubnt:blue:wlan",
- .gpio = 0,
- }, {
- .name = "ubnt:white:status",
- .gpio = 1,
- },
-};
-
-static struct gpio_keys_button airgateway_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 12,
- .active_low = 1,
- }
-};
-
-static void __init ubnt_airgateway_setup(void)
-{
- u32 t;
- u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
-
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
- t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN;
- ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t);
-
- ath79_register_m25p80(NULL);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds),
- ubnt_airgateway_gpio_leds);
-
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(airgateway_gpio_keys),
- airgateway_gpio_keys);
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_register_eth(1);
- ath79_register_eth(0);
-
- ath79_register_wmac(ee, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway",
- ubnt_airgateway_setup);
-
-static struct gpio_led ubnt_airgateway_pro_gpio_leds[] __initdata = {
- {
- .name = "ubnt:blue:wlan",
- .gpio = 13,
- }, {
- .name = "ubnt:white:status",
- .gpio = 17,
- },
-};
-
-
-static struct gpio_keys_button airgateway_pro_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 12,
- .active_low = 1,
- }
-};
-
-static void __init ubnt_airgateway_pro_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_pro_gpio_leds),
- ubnt_airgateway_pro_gpio_leds);
-
- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(airgateway_pro_gpio_keys),
- airgateway_pro_gpio_keys);
-
- ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL);
- ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL);
-
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_register_mdio(1, 0x0);
-
- /* GMAC0 is left unused in this configuration */
-
- /* GMAC1 is connected to MAC0 on the internal switch */
- /* The PoE/WAN port connects to port 5 on the internal switch */
- /* The LAN port connects to port 4 on the internal switch */
- ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_AIRGWP, "UBNT-AGWP", "Ubiquiti AirGateway Pro",
- ubnt_airgateway_pro_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt.c
deleted file mode 100644
index e49ac23fd1..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Ubiquiti RouterStation support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2008 Ubiquiti <support@ubnt.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define UBNT_RS_GPIO_LED_RF 2
-#define UBNT_RS_GPIO_SW4 8
-
-#define UBNT_LS_SR71_GPIO_LED_D25 0
-#define UBNT_LS_SR71_GPIO_LED_D26 1
-#define UBNT_LS_SR71_GPIO_LED_D24 2
-#define UBNT_LS_SR71_GPIO_LED_D23 4
-#define UBNT_LS_SR71_GPIO_LED_D22 5
-#define UBNT_LS_SR71_GPIO_LED_D27 6
-#define UBNT_LS_SR71_GPIO_LED_D28 7
-
-#define UBNT_KEYS_POLL_INTERVAL 20 /* msecs */
-#define UBNT_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_KEYS_POLL_INTERVAL)
-
-static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
- {
- .name = "ubnt:green:rf",
- .gpio = UBNT_RS_GPIO_LED_RF,
- .active_low = 0,
- }
-};
-
-static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
- {
- .name = "ubnt:green:d22",
- .gpio = UBNT_LS_SR71_GPIO_LED_D22,
- .active_low = 0,
- }, {
- .name = "ubnt:green:d23",
- .gpio = UBNT_LS_SR71_GPIO_LED_D23,
- .active_low = 0,
- }, {
- .name = "ubnt:green:d24",
- .gpio = UBNT_LS_SR71_GPIO_LED_D24,
- .active_low = 0,
- }, {
- .name = "ubnt:red:d25",
- .gpio = UBNT_LS_SR71_GPIO_LED_D25,
- .active_low = 0,
- }, {
- .name = "ubnt:red:d26",
- .gpio = UBNT_LS_SR71_GPIO_LED_D26,
- .active_low = 0,
- }, {
- .name = "ubnt:green:d27",
- .gpio = UBNT_LS_SR71_GPIO_LED_D27,
- .active_low = 0,
- }, {
- .name = "ubnt:green:d28",
- .gpio = UBNT_LS_SR71_GPIO_LED_D28,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button ubnt_gpio_keys[] __initdata = {
- {
- .desc = "sw4",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = UBNT_KEYS_DEBOUNCE_INTERVAL,
- .gpio = UBNT_RS_GPIO_SW4,
- .active_low = 1,
- }
-};
-
-static const char *ubnt_part_probes[] = {
- "RedBoot",
- NULL,
-};
-
-static struct flash_platform_data ubnt_flash_data = {
- .part_probes = ubnt_part_probes,
-};
-
-static void __init ubnt_generic_setup(void)
-{
- ath79_register_m25p80(&ubnt_flash_data);
-
- ath79_register_gpio_keys_polled(-1, UBNT_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ubnt_gpio_keys),
- ubnt_gpio_keys);
- ath79_register_pci();
-}
-
-#define UBNT_RS_WAN_PHYMASK BIT(20)
-#define UBNT_RS_LAN_PHYMASK (BIT(16) | BIT(17) | BIT(18) | BIT(19))
-
-static void __init ubnt_rs_setup(void)
-{
- ubnt_generic_setup();
-
- ath79_register_mdio(0, ~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
-
- /*
- * There is Secondary MAC address duplicate problem with some
- * UBNT HW batches. Do not increase Secondary MAC address by 1
- * but do workaround with 'Locally Administrated' bit.
- */
- ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.speed = SPEED_100;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_usb();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
- ubnt_rs_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation",
- ubnt_rs_setup);
-
-#define UBNT_RSPRO_WAN_PHYMASK BIT(4)
-#define UBNT_RSPRO_LAN_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3))
-
-static void __init ubnt_rspro_setup(void)
-{
- ubnt_generic_setup();
-
- ath79_register_mdio(0, ~(UBNT_RSPRO_WAN_PHYMASK |
- UBNT_RSPRO_LAN_PHYMASK));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
-
- /*
- * There is Secondary MAC address duplicate problem with some
- * UBNT HW batches. Do not increase Secondary MAC address by 1
- * but do workaround with 'Locally Administrated' bit.
- */
- ath79_init_local_mac(ath79_eth1_data.mac_addr, ath79_mac_base);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_usb();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
- ubnt_rs_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro",
- ubnt_rspro_setup);
-
-static void __init ubnt_lsx_setup(void)
-{
- ubnt_generic_setup();
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup);
-
-#define UBNT_LSSR71_PHY_MASK BIT(1)
-
-static void __init ubnt_lssr71_setup(void)
-{
- ubnt_generic_setup();
-
- ath79_register_mdio(0, ~UBNT_LSSR71_PHY_MASK);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK;
-
- ath79_register_eth(0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio),
- ubnt_ls_sr71_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71",
- ubnt_lssr71_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wam250.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wam250.c
deleted file mode 100644
index 31817bddf2..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wam250.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Samsung WAM250 board support
- *
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WAM250_GPIO_LED_LAN 13
-#define WAM250_GPIO_LED_POWER 15
-#define WAM250_GPIO_LED_REPEATER 14
-#define WAM250_GPIO_LED_WLAN 12
-
-#define WAM250_GPIO_BTN_RESET 17
-#define WAM250_GPIO_BTN_SPKADD 1
-
-#define WAM250_GPIO_EXT_LNA 19
-
-#define WAM250_MAC_OFFSET 2
-
-#define WAM250_KEYS_POLL_INTERVAL 20
-#define WAM250_KEYS_DEBOUNCE_INTERVAL (3 * WAM250_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wam250_leds_gpio[] __initdata = {
- {
- .name = "wam250:white:lan",
- .gpio = WAM250_GPIO_LED_LAN,
- .active_low = 1,
- }, {
- .name = "wam250:white:power",
- .gpio = WAM250_GPIO_LED_POWER,
- .default_state = LEDS_GPIO_DEFSTATE_KEEP,
- .active_low = 1,
- }, {
- .name = "wam250:white:repeater",
- .gpio = WAM250_GPIO_LED_REPEATER,
- .active_low = 1,
- }, {
- .name = "wam250:white:wlan",
- .gpio = WAM250_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button wam250_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WAM250_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WAM250_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WAM250_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WAM250_GPIO_BTN_SPKADD,
- .active_low = 1,
- },
-};
-
-static void __init wam250_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_mdio(1, 0x0);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_PHY_SWAP);
-
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = 0xfd;
-
- /* LAN */
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.phy_mask = BIT(1);
- ath79_init_mac(ath79_eth1_data.mac_addr, art + WAM250_MAC_OFFSET, 0);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr, art + WAM250_MAC_OFFSET, 1);
- ath79_register_eth(0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wam250_leds_gpio),
- wam250_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WAM250_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wam250_gpio_keys),
- wam250_gpio_keys);
-
- ath79_wmac_set_ext_lna_gpio(0, WAM250_GPIO_EXT_LNA);
-
- ath79_register_usb();
- ath79_register_wmac(art, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_WAM250, "WAM250", "Samsung WAM250", wam250_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-weio.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-weio.c
deleted file mode 100644
index 3973ada7c3..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-weio.c
+++ /dev/null
@@ -1,140 +0,0 @@
-/**
- * WEIO Web Of Things Platform
- *
- * Copyright (C) 2013 Drasko DRASKOVIC and Uros PETREVSKI
- *
- * ## ## ######## #### #######
- * ## ## ## ## ## ## ##
- * ## ## ## ## ## ## ##
- * ## ## ## ###### ## ## ##
- * ## ## ## ## ## ## ##
- * ## ## ## ## ## ## ##
- * ### ### ######## #### #######
- *
- * Web Of Things Platform
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * Authors :
- * Drasko DRASKOVIC <drasko.draskovic@gmail.com>
- * Uros PETREVSKI <uros@nodesign.net>
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_device.h>
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WEIO_GPIO_LED_STA 1
-#define WEIO_GPIO_LED_AP 16
-
-#define WEIO_GPIO_BTN_AP 20
-#define WEIO_GPIO_BTN_RESET 23
-
-#define WEIO_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WEIO_KEYS_DEBOUNCE_INTERVAL (3 * WEIO_KEYS_POLL_INTERVAL)
-
-#define WEIO_MAC0_OFFSET 0x0000
-#define WEIO_MAC1_OFFSET 0x0006
-#define WEIO_CALDATA_OFFSET 0x1000
-#define WEIO_WMAC_MAC_OFFSET 0x1002
-
-static struct gpio_led weio_leds_gpio[] __initdata = {
- {
- .name = "weio:green:sta",
- .gpio = WEIO_GPIO_LED_STA,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- {
- .name = "weio:green:ap",
- .gpio = WEIO_GPIO_LED_AP,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }
-};
-
-static struct gpio_keys_button weio_gpio_keys[] __initdata = {
- {
- .desc = "ap button",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = WEIO_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WEIO_GPIO_BTN_AP,
- .active_low = 1,
- },
- {
- .desc = "soft-reset button",
- .type = EV_KEY,
- .code = BTN_1,
- .debounce_interval = WEIO_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WEIO_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct i2c_gpio_platform_data weio_i2c_gpio_data = {
- .sda_pin = 18,
- .scl_pin = 19,
-};
-
-static struct platform_device weio_i2c_gpio = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &weio_i2c_gpio_data,
- },
-};
-
-static void __init weio_common_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
- ath79_register_wmac(art + WEIO_CALDATA_OFFSET, art + WEIO_WMAC_MAC_OFFSET);
-}
-
-static void __init weio_setup(void)
-{
- weio_common_setup();
-
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- platform_device_register(&weio_i2c_gpio);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(weio_leds_gpio),
- weio_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WEIO_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(weio_gpio_keys),
- weio_gpio_keys);
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_WEIO, "WEIO", "WeIO board", weio_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-whr-hp-g300n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-whr-hp-g300n.c
deleted file mode 100644
index 48f49ad0f7..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-whr-hp-g300n.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Buffalo WHR-HP-G300N board support
- *
- * based on ...
- *
- * TP-LINK TL-WR741ND board support
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define WHRHPG300N_GPIO_LED_SECURITY 0
-#define WHRHPG300N_GPIO_LED_DIAG 1
-#define WHRHPG300N_GPIO_LED_ROUTER 6
-
-#define WHRHPG300N_GPIO_BTN_ROUTER_ON 7
-#define WHRHPG300N_GPIO_BTN_ROUTER_AUTO 8
-#define WHRHPG300N_GPIO_BTN_RESET 11
-#define WHRHPG300N_GPIO_BTN_AOSS 12
-#define WHRHPG300N_GPIO_LED_LAN1 13
-#define WHRHPG300N_GPIO_LED_LAN2 14
-#define WHRHPG300N_GPIO_LED_LAN3 15
-#define WHRHPG300N_GPIO_LED_LAN4 16
-#define WHRHPG300N_GPIO_LED_WAN 17
-
-#define WHRHPG300N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WHRHPG300N_KEYS_DEBOUNCE_INTERVAL (3 * WHRHPG300N_KEYS_POLL_INTERVAL)
-
-#define WHRHPG300N_MAC_OFFSET 0x20c
-
-static struct gpio_led whrhpg300n_leds_gpio[] __initdata = {
- {
- .name = "buffalo:orange:security",
- .gpio = WHRHPG300N_GPIO_LED_SECURITY,
- .active_low = 1,
- }, {
- .name = "buffalo:red:diag",
- .gpio = WHRHPG300N_GPIO_LED_DIAG,
- .active_low = 1,
- }, {
- .name = "buffalo:green:router",
- .gpio = WHRHPG300N_GPIO_LED_ROUTER,
- .active_low = 1,
- }, {
- .name = "buffalo:green:wan",
- .gpio = WHRHPG300N_GPIO_LED_WAN,
- .active_low = 1,
- }, {
- .name = "buffalo:green:lan1",
- .gpio = WHRHPG300N_GPIO_LED_LAN1,
- .active_low = 1,
- }, {
- .name = "buffalo:green:lan2",
- .gpio = WHRHPG300N_GPIO_LED_LAN2,
- .active_low = 1,
- }, {
- .name = "buffalo:green:lan3",
- .gpio = WHRHPG300N_GPIO_LED_LAN3,
- .active_low = 1,
- }, {
- .name = "buffalo:green:lan4",
- .gpio = WHRHPG300N_GPIO_LED_LAN4,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button whrhpg300n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WHRHPG300N_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "aoss/wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .gpio = WHRHPG300N_GPIO_BTN_AOSS,
- .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
- .active_low = 1,
- }, {
- .desc = "router_on",
- .type = EV_KEY,
- .code = BTN_2,
- .gpio = WHRHPG300N_GPIO_BTN_ROUTER_ON,
- .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
- .active_low = 1,
- }, {
- .desc = "router_auto",
- .type = EV_KEY,
- .code = BTN_3,
- .gpio = WHRHPG300N_GPIO_BTN_ROUTER_AUTO,
- .debounce_interval = WHRHPG300N_KEYS_DEBOUNCE_INTERVAL,
- .active_low = 1,
- }
-};
-
-static void __init whrhpg300n_setup(void)
-{
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 *mac = (u8 *) KSEG1ADDR(ee + WHRHPG300N_MAC_OFFSET);
-
- ath79_register_m25p80(NULL);
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(whrhpg300n_leds_gpio),
- whrhpg300n_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WHRHPG300N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(whrhpg300n_gpio_keys),
- whrhpg300n_gpio_keys);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN ports */
- ath79_register_eth(1);
- /* WAN port */
- ath79_register_eth(0);
-
- ap9x_pci_setup_wmac_led_pin(0, 1);
-
- ap91_pci_init(ee, mac);
-}
-
-MIPS_MACHINE(ATH79_MACH_WHR_HP_G300N, "WHR-HP-G300N", "Buffalo WHR-HP-G300N",
- whrhpg300n_setup);
-
-MIPS_MACHINE(ATH79_MACH_WHR_G301N, "WHR-G301N", "Buffalo WHR-G301N",
- whrhpg300n_setup);
-
-MIPS_MACHINE(ATH79_MACH_WHR_HP_GN, "WHR-HP-GN", "Buffalo WHR-HP-GN",
- whrhpg300n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wi2a-ac200i.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wi2a-ac200i.c
deleted file mode 100644
index 85e0c8fea3..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wi2a-ac200i.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * Nokia WI2A-AC200i support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2017 Felix Fietkau <nbd@nbd.name>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform/ar934x_nfc.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/fw/fw.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define AC200I_GPIO_BTN_RESET 17
-
-#define AC200I_KEYS_POLL_INTERVAL 20 /* msecs */
-#define AC200I_KEYS_DEBOUNCE_INTERVAL (3 * AC200I_KEYS_POLL_INTERVAL)
-
-#define AC200I_MAC_ADDR 0x1f040249
-#define AC200I_MAC1_OFFSET 6
-#define AC200I_WMAC_CALDATA_ADDR 0x1f061000
-
-static struct gpio_led ac200i_leds_gpio[] __initdata = {
- {
- .name = "nokia:red:wlan-2g",
- .gpio = 0,
- .active_low = 1,
- },
- {
- .name = "nokia:green:power",
- .gpio = 1,
- .active_low = 1,
- },
- {
- .name = "nokia:green:wlan-2g",
- .gpio = 2,
- .active_low = 1,
- },
- {
- .name = "nokia:green:ctrl",
- .gpio = 3,
- .active_low = 1,
- },
- {
- .name = "nokia:green:eth",
- .gpio = 4,
- .active_low = 1,
- },
- {
- .name = "nokia:red:power",
- .gpio = 13,
- .active_low = 1,
- },
- {
- .name = "nokia:red:eth",
- .gpio = 14,
- .active_low = 1,
- },
- {
- .name = "nokia:red:wlan-5g",
- .gpio = 18,
- .active_low = 1,
- },
- {
- .name = "nokia:green:wlan-5g",
- .gpio = 19,
- .active_low = 1,
- },
- {
- .name = "nokia:red:ctrl",
- .gpio = 20,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button ac200i_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = AC200I_KEYS_DEBOUNCE_INTERVAL,
- .gpio = AC200I_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct mtd_partition ac200i_nand_partitions[] = {
- {
- .name = "cfg",
- .offset = 0x0100000,
- .size = 0x1800000,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .offset = 0x2000000,
- .size = 0x0400000,
- },
- {
- .name = "ubi",
- .offset = 0x2400000,
- .size = 0x2000000,
- },
- {
- .name = "kernel",
- .offset = 0x5000000,
- .size = 0x0400000,
- },
- {
- .name = "ubi",
- .offset = 0x5400000,
- .size = 0x2000000,
- },
-};
-
-static const char *boot_getenv(const char *key)
-{
- const char *start = (const char *) KSEG1ADDR(0x1f070000);
- const char *end = start + 0x20000;
- const char *addr;
-
- for (addr = start + 4;
- *addr && *addr != 0xff && addr < end &&
- strnlen(addr, end - addr) < end - addr;
- addr += strnlen(addr, end - addr) + 1) {
- const char *val;
-
- val = strchr(addr, '=');
- if (!val)
- continue;
-
- if (strncmp(addr, key, val - addr))
- continue;
-
- return val + 1;
- }
- return NULL;
-}
-
-static void __init ac200i_setup(void)
-{
- const char *img;
- u8 *wmac = (u8 *) KSEG1ADDR(AC200I_WMAC_CALDATA_ADDR);
- u8 *mac_addr = (u8 *) KSEG1ADDR(AC200I_MAC_ADDR);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ac200i_leds_gpio),
- ac200i_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AC200I_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ac200i_gpio_keys),
- ac200i_gpio_keys);
-
- ath79_register_usb();
- ath79_nfc_set_parts(ac200i_nand_partitions,
- ARRAY_SIZE(ac200i_nand_partitions));
- ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
- ath79_register_nfc();
-
- ath79_register_wmac(wmac, NULL);
-
- ath79_register_mdio(0, 0x0);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac_addr, 0);
-
- /* GMAC0 is connected to the SGMII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x03000101;
- ath79_eth0_pll_data.pll_100 = 0x80000101;
- ath79_eth0_pll_data.pll_10 = 0x80001313;
-
- img = boot_getenv("dualPartition");
- if (img && !strcmp(img, "imgA")) {
- ac200i_nand_partitions[3].name = "kernel_alt";
- ac200i_nand_partitions[4].name = "ubi_alt";
- } else {
- ac200i_nand_partitions[1].name = "kernel_alt";
- ac200i_nand_partitions[2].name = "ubi_alt";
- }
-
- ath79_register_eth(0);
-
- ath79_register_pci();
-}
-
-MIPS_MACHINE(ATH79_MACH_WI2A_AC200I, "WI2A-AC200i",
- "Nokia WI2A-AC200i",
- ac200i_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wifi-pineapple-nano.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wifi-pineapple-nano.c
deleted file mode 100644
index 645f367f6c..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wifi-pineapple-nano.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Hak5 WiFi Pineapple NANO board support
- *
- * Copyright (C) 2018 Sebastian Kinne <seb@hak5.org>
- * Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WIFI_PINEAPPLE_NANO_GPIO_LED_SYSTEM 18
-
-#define WIFI_PINEAPPLE_NANO_GPIO_BTN_RESET 12
-#define WIFI_PINEAPPLE_NANO_GPIO_SD_DET 19
-#define WIFI_PINEAPPLE_NANO_GPIO_USB_ALARM 20
-#define WIFI_PINEAPPLE_NANO_GPIO_USB_POWER 23
-
-#define HAK5_KEYS_POLL_INTERVAL 20 /* msecs */
-#define HAK5_KEYS_DEBOUNCE_INTERVAL (3 * HAK5_KEYS_POLL_INTERVAL)
-
-#define WIFI_PINEAPPLE_NANO_MAC1_OFFSET 0x0006
-#define WIFI_PINEAPPLE_NANO_CALDATA_OFFSET 0x1000
-
-static const char *hak5_part_probes[] = {
- "tp-link",
- NULL,
-};
-
-static struct flash_platform_data hak5_flash_data = {
- .part_probes = hak5_part_probes,
-};
-
-static struct gpio_led wifi_pineapple_nano_leds_gpio[] __initdata = {
- {
- .name = "wifi-pineapple-nano:blue:system",
- .gpio = WIFI_PINEAPPLE_NANO_GPIO_LED_SYSTEM,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button wifi_pineapple_nano_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = HAK5_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WIFI_PINEAPPLE_NANO_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static void __init wifi_pineapple_nano_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(&hak5_flash_data);
-
- ath79_setup_ar933x_phy4_switch(false, false);
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + WIFI_PINEAPPLE_NANO_MAC1_OFFSET, 0);
- ath79_register_eth(0);
-
- /* GPIO11/12 */
- ath79_gpio_function_disable(AR933X_GPIO_FUNC_UART_RTS_CTS_EN);
-
- gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_SD_DET,
- GPIOF_IN | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW,
- "SD card present");
-
- gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_USB_ALARM,
- GPIOF_IN | GPIOF_EXPORT_DIR_FIXED | GPIOF_ACTIVE_LOW,
- "USB alarm");
-
- gpio_request_one(WIFI_PINEAPPLE_NANO_GPIO_USB_POWER,
- GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED |
- GPIOF_ACTIVE_LOW, "USB power");
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wifi_pineapple_nano_leds_gpio),
- wifi_pineapple_nano_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, HAK5_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wifi_pineapple_nano_gpio_keys),
- wifi_pineapple_nano_gpio_keys);
-
- ath79_register_usb();
- ath79_register_wmac(art + WIFI_PINEAPPLE_NANO_CALDATA_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_WIFI_PINEAPPLE_NANO, "WIFI-PINEAPPLE-NANO",
- "Hak5 WiFi Pineapple NANO", wifi_pineapple_nano_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c
deleted file mode 100644
index 11006fd1bc..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlae-ag300n.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Buffalo WLAE-AG300N board support
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WLAEAG300N_MAC_OFFSET 0x20c
-#define WLAEAG300N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WLAEAG300N_KEYS_DEBOUNCE_INTERVAL (3 * WLAEAG300N_KEYS_POLL_INTERVAL)
-
-
-static struct gpio_led wlaeag300n_leds_gpio[] __initdata = {
- /*
- * Note: Writing 1 into GPIO 13 will power down the device.
- */
- {
- .name = "buffalo:green:wireless",
- .gpio = 14,
- .active_low = 1,
- }, {
- .name = "buffalo:red:wireless",
- .gpio = 15,
- .active_low = 1,
- }, {
- .name = "buffalo:green:status",
- .gpio = 16,
- .active_low = 1,
- }, {
- .name = "buffalo:red:status",
- .gpio = 17,
- .active_low = 1,
- }
-};
-
-
-static struct gpio_keys_button wlaeag300n_gpio_keys[] __initdata = {
- {
- .desc = "function",
- .type = EV_KEY,
- .code = KEY_MODE,
- .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 0,
- .active_low = 1,
- }, {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 1,
- .active_low = 1,
- }, {
- .desc = "power",
- .type = EV_KEY,
- .code = KEY_POWER,
- .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 11,
- .active_low = 1,
- }, {
- .desc = "aoss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WLAEAG300N_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 12,
- .active_low = 1,
- }
-};
-
-static void __init wlaeag300n_setup(void)
-{
- u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 *mac1 = eeprom1 + WLAEAG300N_MAC_OFFSET;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac1, 1);
-
- ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = BIT(4);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wlaeag300n_leds_gpio),
- wlaeag300n_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WLAEAG300N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wlaeag300n_gpio_keys),
- wlaeag300n_gpio_keys);
-
- ath79_register_m25p80(NULL);
-
- ap91_pci_init(eeprom1, mac1);
-}
-
-MIPS_MACHINE(ATH79_MACH_WLAE_AG300N, "WLAE-AG300N",
- "Buffalo WLAE-AG300N", wlaeag300n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c
deleted file mode 100644
index 04b12fc7cc..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wlr8100.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Sitecom X8 AC1750 WLR-8100 board support
- *
- * Based on the Qualcomm Atheros AP135/AP136 reference board support code
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WLR8100_GPIO_LED_USB 4
-#define WLR8100_GPIO_LED_WLAN_5G 12
-#define WLR8100_GPIO_LED_WLAN_2G 13
-#define WLR8100_GPIO_LED_STATUS_RED 14
-#define WLR8100_GPIO_LED_WPS_RED 15
-#define WLR8100_GPIO_LED_STATUS_AMBER 19
-#define WLR8100_GPIO_LED_WPS_GREEN 20
-
-#define WLR8100_GPIO_BTN_WPS 16
-#define WLR8100_GPIO_BTN_RFKILL 21
-
-#define WLR8100_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WLR8100_KEYS_DEBOUNCE_INTERVAL (3 * WLR8100_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wlr8100_leds_gpio[] __initdata = {
- {
- .name = "wlr8100:amber:status",
- .gpio = WLR8100_GPIO_LED_STATUS_AMBER,
- .active_low = 1,
- },
- {
- .name = "wlr8100:red:status",
- .gpio = WLR8100_GPIO_LED_STATUS_RED,
- .active_low = 1,
- },
- {
- .name = "wlr8100:green:wps",
- .gpio = WLR8100_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- },
- {
- .name = "wlr8100:red:wps",
- .gpio = WLR8100_GPIO_LED_WPS_RED,
- .active_low = 1,
- },
- {
- .name = "wlr8100:red:wlan-2g",
- .gpio = WLR8100_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
- .name = "wlr8100:red:usb",
- .gpio = WLR8100_GPIO_LED_USB,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wlr8100_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WLR8100_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WLR8100_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = WLR8100_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WLR8100_GPIO_BTN_RFKILL,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg wlr8100_ar8327_pad0_cfg;
-static struct ar8327_pad_cfg wlr8100_ar8327_pad6_cfg;
-
-static struct ar8327_platform_data wlr8100_ar8327_data = {
- .pad0_cfg = &wlr8100_ar8327_pad0_cfg,
- .pad6_cfg = &wlr8100_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info wlr8100_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &wlr8100_ar8327_data,
- },
-};
-
-static void __init wlr8100_common_setup(void)
-{
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wlr8100_leds_gpio),
- wlr8100_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WLR8100_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wlr8100_gpio_keys),
- wlr8100_gpio_keys);
-
- ath79_register_usb();
-
- ath79_register_wmac_simple();
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- ath79_register_mdio(0, 0x0);
-
- mdiobus_register_board_info(wlr8100_mdio0_info,
- ARRAY_SIZE(wlr8100_mdio0_info));
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_register_eth(0);
-
- /* GMAC1 is connected tot eh SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(1);
-}
-
-static void __init wlr8100_010_setup(void)
-{
- /* GMAC0 of the AR8337 switch is connected to GMAC0 via RGMII */
- wlr8100_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
- wlr8100_ar8327_pad0_cfg.txclk_delay_en = true;
- wlr8100_ar8327_pad0_cfg.rxclk_delay_en = true;
- wlr8100_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
- wlr8100_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-
- /* GMAC6 of the AR8337 switch is connected to GMAC1 via SGMII */
- wlr8100_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
- wlr8100_ar8327_pad6_cfg.rxclk_delay_en = true;
- wlr8100_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
-
- ath79_eth0_pll_data.pll_1000 = 0xa6000000;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- wlr8100_common_setup();
- ap91_pci_init_simple();
-}
-
-MIPS_MACHINE(ATH79_MACH_WLR8100, "WLR8100",
- "Sitecom WLR-8100",
- wlr8100_010_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c
deleted file mode 100644
index eae1c383ee..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndap360.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Netgear WNDAP360 board support (proper leds / button support missing)
- *
- * Based on AP96
- * Copyright (C) 2013 Jacek Kikiewicz
- * Copyright (C) 2009 Marco Porsch
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2010 Atheros Communications
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define WNDAP360_GPIO_LED_POWER_ORANGE 0
-#define WNDAP360_GPIO_LED_POWER_GREEN 2
-
-/* Reset button - next to the power connector */
-#define WNDAP360_GPIO_BTN_RESET 8
-
-#define WNDAP360_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WNDAP360_KEYS_DEBOUNCE_INTERVAL (3 * WNDAP360_KEYS_POLL_INTERVAL)
-
-#define WNDAP360_WMAC0_MAC_OFFSET 0x120c
-#define WNDAP360_WMAC1_MAC_OFFSET 0x520c
-#define WNDAP360_CALDATA0_OFFSET 0x1000
-#define WNDAP360_CALDATA1_OFFSET 0x5000
-
-/*
- * WNDAP360 this still uses leds definitions from AP96
- *
- */
-static struct gpio_led wndap360_leds_gpio[] __initdata = {
- {
- .name = "netgear:green:power",
- .gpio = WNDAP360_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:orange:power",
- .gpio = WNDAP360_GPIO_LED_POWER_ORANGE,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wndap360_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WNDAP360_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNDAP360_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-#define WNDAP360_LAN_PHYMASK 0x0f
-
-static void __init wndap360_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_mdio(0, ~(WNDAP360_LAN_PHYMASK));
-
- /* Reusing wifi MAC with offset of 1 as eth0 MAC */
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + WNDAP360_WMAC0_MAC_OFFSET, 1);
- ath79_eth0_pll_data.pll_1000 = 0x11110000;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = WNDAP360_LAN_PHYMASK;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_register_eth(0);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wndap360_leds_gpio),
- wndap360_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WNDAP360_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wndap360_gpio_keys),
- wndap360_gpio_keys);
-
- ap9x_pci_setup_wmac_led_pin(0, 5);
- ap9x_pci_setup_wmac_led_pin(1, 5);
-
- ap94_pci_init(art + WNDAP360_CALDATA0_OFFSET,
- art + WNDAP360_WMAC0_MAC_OFFSET,
- art + WNDAP360_CALDATA1_OFFSET,
- art + WNDAP360_WMAC1_MAC_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_WNDAP360, "WNDAP360", "NETGEAR WNDAP360", wndap360_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr3700.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr3700.c
deleted file mode 100644
index b9132fc363..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr3700.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Netgear WNDR3700 board support
- *
- * Copyright (C) 2009 Marco Porsch
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/delay.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WNDR3700_GPIO_LED_WPS_ORANGE 0
-#define WNDR3700_GPIO_LED_POWER_ORANGE 1
-#define WNDR3700_GPIO_LED_POWER_GREEN 2
-#define WNDR3700_GPIO_LED_WPS_GREEN 4
-#define WNDR3700_GPIO_LED_WAN_GREEN 6
-
-#define WNDR3700_GPIO_BTN_WPS 3
-#define WNDR3700_GPIO_BTN_RESET 8
-#define WNDR3700_GPIO_BTN_RFKILL 11
-
-#define WNDR3700_GPIO_RTL8366_SDA 5
-#define WNDR3700_GPIO_RTL8366_SCK 7
-
-#define WNDR3700_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WNDR3700_KEYS_DEBOUNCE_INTERVAL (3 * WNDR3700_KEYS_POLL_INTERVAL)
-
-#define WNDR3700_ETH0_MAC_OFFSET 0
-#define WNDR3700_ETH1_MAC_OFFSET 0x6
-
-#define WNDR3700_WMAC0_MAC_OFFSET 0
-#define WNDR3700_WMAC1_MAC_OFFSET 0xc
-#define WNDR3700_CALDATA0_OFFSET 0x1000
-#define WNDR3700_CALDATA1_OFFSET 0x5000
-
-static struct gpio_led wndr3700_leds_gpio[] __initdata = {
- {
- .name = "netgear:green:power",
- .gpio = WNDR3700_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:orange:power",
- .gpio = WNDR3700_GPIO_LED_POWER_ORANGE,
- .active_low = 1,
- }, {
- .name = "netgear:green:wps",
- .gpio = WNDR3700_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:orange:wps",
- .gpio = WNDR3700_GPIO_LED_WPS_ORANGE,
- .active_low = 1,
- }, {
- .name = "netgear:green:wan",
- .gpio = WNDR3700_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wndr3700_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNDR3700_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNDR3700_GPIO_BTN_WPS,
- .active_low = 1,
- }, {
- .desc = "rfkill",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = WNDR3700_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNDR3700_GPIO_BTN_RFKILL,
- .active_low = 1,
- }
-};
-
-static struct rtl8366_platform_data wndr3700_rtl8366s_data = {
- .gpio_sda = WNDR3700_GPIO_RTL8366_SDA,
- .gpio_sck = WNDR3700_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device wndr3700_rtl8366s_device = {
- .name = RTL8366S_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &wndr3700_rtl8366s_data,
- }
-};
-
-static void __init wndr3700_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- /*
- * The eth0 and wmac0 interfaces share the same MAC address which
- * can lead to problems if operated unbridged. Set the locally
- * administered bit on the eth0 MAC to make it unique.
- */
- ath79_init_local_mac(ath79_eth0_data.mac_addr,
- art + WNDR3700_ETH0_MAC_OFFSET);
- ath79_eth0_pll_data.pll_1000 = 0x11110000;
- ath79_eth0_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_init_mac(ath79_eth1_data.mac_addr,
- art + WNDR3700_ETH1_MAC_OFFSET, 0);
- ath79_eth1_pll_data.pll_1000 = 0x11110000;
- ath79_eth1_data.mii_bus_dev = &wndr3700_rtl8366s_device.dev;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_usb();
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr3700_leds_gpio),
- wndr3700_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WNDR3700_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wndr3700_gpio_keys),
- wndr3700_gpio_keys);
-
- platform_device_register(&wndr3700_rtl8366s_device);
- platform_device_register_simple("wndr3700-led-usb", -1, NULL, 0);
-
- ap9x_pci_setup_wmac_led_pin(0, 5);
- ap9x_pci_setup_wmac_led_pin(1, 5);
-
- /* 2.4 GHz uses the first fixed antenna group (1, 0, 1, 0) */
- ap9x_pci_setup_wmac_gpio(0, (0xf << 6), (0xa << 6));
-
- /* 5 GHz uses the second fixed antenna group (0, 1, 1, 0) */
- ap9x_pci_setup_wmac_gpio(1, (0xf << 6), (0x6 << 6));
-
- ap94_pci_init(art + WNDR3700_CALDATA0_OFFSET,
- art + WNDR3700_WMAC0_MAC_OFFSET,
- art + WNDR3700_CALDATA1_OFFSET,
- art + WNDR3700_WMAC1_MAC_OFFSET);
-}
-
-MIPS_MACHINE(ATH79_MACH_WNDR3700, "WNDR3700",
- "NETGEAR WNDR3700/WNDR3800/WNDRMAC",
- wndr3700_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr4300.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr4300.c
deleted file mode 100644
index 339216da1b..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wndr4300.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
- * NETGEAR WNDR3700v4/WNDR4300 board support
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2014 Ralph Perlich <rpsoft@arcor.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/version.h>
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <linux/mtd/mtd.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/platform/ar934x_nfc.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-/* AR9344 GPIOs */
-#define WNDR4300_GPIO_LED_POWER_GREEN 0
-#define WNDR4300_GPIO_LED_POWER_AMBER 2
-#define WNDR4300_GPIO_LED_USB 13
-#define WNDR4300_GPIO_LED_WAN_GREEN 1
-#define WNDR4300_GPIO_LED_WAN_AMBER 3
-#define WNDR4300_GPIO_LED_WLAN2G 11
-#define WNDR4300_GPIO_LED_WLAN5G 14
-#define WNDR4300_GPIO_LED_WPS_GREEN 16
-#define WNDR4300_GPIO_LED_WPS_AMBER 17
-
-#define WNDR4300_GPIO_BTN_RESET 21
-#define WNDR4300_GPIO_BTN_WIRELESS 15
-#define WNDR4300_GPIO_BTN_WPS 12
-
-/* AR9580 GPIOs */
-#define WNDR4300_GPIO_USB_5V 0
-
-#define WNDR4300_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WNDR4300_KEYS_DEBOUNCE_INTERVAL (3 * WNDR4300_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wndr4300_leds_gpio[] __initdata = {
- {
- .name = "netgear:green:power",
- .gpio = WNDR4300_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- },
- {
- .name = "netgear:amber:power",
- .gpio = WNDR4300_GPIO_LED_POWER_AMBER,
- .active_low = 1,
- },
- {
- .name = "netgear:green:wan",
- .gpio = WNDR4300_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "netgear:amber:wan",
- .gpio = WNDR4300_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- },
- {
- .name = "netgear:green:usb",
- .gpio = WNDR4300_GPIO_LED_USB,
- .active_low = 1,
- },
- {
- .name = "netgear:green:wps",
- .gpio = WNDR4300_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- },
- {
- .name = "netgear:amber:wps",
- .gpio = WNDR4300_GPIO_LED_WPS_AMBER,
- .active_low = 1,
- },
- {
- .name = "netgear:green:wlan2g",
- .gpio = WNDR4300_GPIO_LED_WLAN2G,
- .active_low = 1,
- },
- {
- .name = "netgear:blue:wlan5g",
- .gpio = WNDR4300_GPIO_LED_WLAN5G,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button wndr4300_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNDR4300_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNDR4300_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "rfkill",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNDR4300_GPIO_BTN_WIRELESS,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg wndr4300_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_led_cfg wndr4300_ar8327_led_cfg = {
- .led_ctrl0 = 0xcc35cc35,
- .led_ctrl1 = 0xcb37cb37,
- .led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x00f3cf00,
- .open_drain = true,
-};
-
-static struct ar8327_platform_data wndr4300_ar8327_data = {
- .pad0_cfg = &wndr4300_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &wndr4300_ar8327_led_cfg,
-};
-
-static struct mdio_board_info wndr4300_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &wndr4300_ar8327_data,
- },
-};
-
-static void __init wndr4300_setup(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(wndr4300_leds_gpio); i++)
- ath79_gpio_output_select(wndr4300_leds_gpio[i].gpio,
- AR934X_GPIO_OUT_GPIO);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr4300_leds_gpio),
- wndr4300_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WNDR4300_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wndr4300_gpio_keys),
- wndr4300_gpio_keys);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
-
- mdiobus_register_board_info(wndr4300_mdio0_info,
- ARRAY_SIZE(wndr4300_mdio0_info));
-
- ath79_register_mdio(0, 0x0);
-
- /* GMAC0 is connected to an AR8327N switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-
- ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
- ath79_register_nfc();
- ath79_register_usb();
-
- ath79_register_wmac_simple();
-
- /* enable power for the USB port */
- ap9x_pci_setup_wmac_gpio(0, BIT(WNDR4300_GPIO_USB_5V),
- BIT(WNDR4300_GPIO_USB_5V));
-
- ap91_pci_init_simple();
-}
-
-MIPS_MACHINE(ATH79_MACH_WNDR3700_V4, "WNDR3700_V4", "NETGEAR WNDR3700v4",
- wndr4300_setup);
-MIPS_MACHINE(ATH79_MACH_WNDR4300, "WNDR4300", "NETGEAR WNDR4300",
- wndr4300_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
deleted file mode 100644
index 76c9cb99c9..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
+++ /dev/null
@@ -1,637 +0,0 @@
-/*
- * NETGEAR WNR2000v3/WNR612v2/WNR1000v2/WPN824N board support
- *
- * Copyright (C) 2015 Hartmut Knaack <knaack.h@gmx.de>
- * Copyright (C) 2013 Mathieu Olivari <mathieu.olivari@gmail.com>
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/kernel.h> /* for max() macro */
-#include <linux/platform_device.h> /* PLATFORM_DEVID_AUTO is defined here */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h> /* needed to disable switch LEDs */
-#include "common.h" /* needed to disable switch LEDs */
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-/* WNR2000v3 - connected through AR7241 */
-#define WNR2000V3_GPIO_LED_WAN_GREEN 0
-#define WNR2000V3_GPIO_LED_LAN1_AMBER 1
-#define WNR2000V3_GPIO_LED_LAN2_AMBER 6
-#define WNR2000V3_GPIO_LED_WPS_GREEN 7
-#define WNR2000V3_GPIO_LED_LAN3_AMBER 8
-#define WNR2000V3_GPIO_BTN_WPS 11
-#define WNR2000V3_GPIO_LED_LAN4_AMBER 12
-#define WNR2000V3_GPIO_LED_LAN1_GREEN 13
-#define WNR2000V3_GPIO_LED_LAN2_GREEN 14
-#define WNR2000V3_GPIO_LED_LAN3_GREEN 15
-#define WNR2000V3_GPIO_LED_LAN4_GREEN 16
-#define WNR2000V3_GPIO_LED_WAN_AMBER 17
-
-/* WNR2000v3 - connected through AR9287 */
-#define WNR2000V3_GPIO_WMAC_LED_WLAN_BLUE 1
-#define WNR2000V3_GPIO_WMAC_LED_TEST_AMBER 2
-#define WNR2000V3_GPIO_WMAC_LED_POWER_GREEN 3
-#define WNR2000V3_GPIO_WMAC_BTN_RESET 8
-#define WNR2000V3_GPIO_WMAC_BTN_RFKILL 9
-
-/* WNR612v2 - connected through AR7241 */
-#define WNR612V2_GPIO_LED_POWER_GREEN 11
-#define WNR612V2_GPIO_LED_LAN1_GREEN 13
-#define WNR612V2_GPIO_LED_LAN2_GREEN 14
-#define WNR612V2_GPIO_LED_WAN_GREEN 17
-
-/* WNR612v2 - connected through AR9285 */
-#define WNR612V2_GPIO_WMAC_LED_WLAN_GREEN 1
-#define WNR612V2_GPIO_WMAC_BTN_RESET 7
-
-/* WNR1000v2 - connected through AR7240 */
-#define WNR1000V2_GPIO_LED_WAN_AMBER 0
-#define WNR1000V2_GPIO_LED_TEST_AMBER 1
-#define WNR1000V2_GPIO_LED_LAN1_AMBER 6 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
-#define WNR1000V2_GPIO_LED_LAN2_AMBER 7 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
-#define WNR1000V2_GPIO_LED_LAN3_AMBER 8 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
-#define WNR1000V2_GPIO_LED_POWER_GREEN 11
-#define WNR1000V2_GPIO_LED_LAN4_AMBER 12
-#define WNR1000V2_GPIO_LED_LAN1_GREEN 13 /* AR724X_..._ETH_SWITCH_LED0 */
-#define WNR1000V2_GPIO_LED_LAN2_GREEN 14 /* AR724X_..._ETH_SWITCH_LED1 */
-#define WNR1000V2_GPIO_LED_LAN3_GREEN 15 /* AR724X_..._ETH_SWITCH_LED2 */
-#define WNR1000V2_GPIO_LED_LAN4_GREEN 16 /* AR724X_..._ETH_SWITCH_LED3 */
-#define WNR1000V2_GPIO_LED_WAN_GREEN 17 /* AR724X_..._ETH_SWITCH_LED4 */
-
-/* WNR1000v2 - connected through AR9285 */
-#define WNR1000V2_GPIO_WMAC_LED_WLAN_BLUE 1
-#define WNR1000V2_GPIO_WMAC_LED_WPS_GREEN 5
-#define WNR1000V2_GPIO_WMAC_BTN_WPS 6
-#define WNR1000V2_GPIO_WMAC_BTN_RESET 7
-#define WNR1000V2_GPIO_WMAC_BTN_RFKILL 8
-
-/* WPN824N - connected through AR7240 */
-#define WPN824N_GPIO_LED_WAN_AMBER 0
-#define WPN824N_GPIO_LED_STATUS_AMBER 1
-#define WPN824N_GPIO_LED_LAN1_AMBER 6 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
-#define WPN824N_GPIO_LED_LAN2_AMBER 7 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
-#define WPN824N_GPIO_LED_LAN3_AMBER 8 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
-#define WPN824N_GPIO_LED_LAN4_AMBER 12
-#define WPN824N_GPIO_LED_LAN1_GREEN 13
-#define WPN824N_GPIO_LED_LAN2_GREEN 14
-#define WPN824N_GPIO_LED_LAN3_GREEN 15 /* AR724X_GPIO_FUNC_CLK_OBS3_EN */
-#define WPN824N_GPIO_LED_LAN4_GREEN 16
-#define WPN824N_GPIO_LED_WAN_GREEN 17
-
-/* WPN824N - connected through AR9285 */
-#define WPN824N_WGPIO_LED_PWR_GREEN 0
-#define WPN824N_WGPIO_LED_WLAN_BLUE 1
-#define WPN824N_WGPIO_LED_WPS1_BLUE 5
-#define WPN824N_WGPIO_LED_WPS2_BLUE 9
-#define WPN824N_WGPIO_LED_TEST_AMBER 10
-#define WPN824N_WGPIO_BTN_WPS 6
-#define WPN824N_WGPIO_BTN_RESET 7
-#define WPN824N_WGPIO_BTN_WLAN 8
-
-#define WNR2000V3_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WNR2000V3_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000V3_KEYS_POLL_INTERVAL)
-
-/* ART offsets for: WNR2000v3, WNR612v2, WNR1000v2 */
-#define WNR2000V3_MAC0_OFFSET 0
-#define WNR2000V3_MAC1_OFFSET 6
-#define WNR2000V3_PCIE_CALDATA_OFFSET 0x1000
-#define WNR2000V3_WMAC_OFFSET 0x108c /* wireless MAC is inside ART */
-
-static struct gpio_led wnr2000v3_leds_gpio[] __initdata = {
- {
- .name = "netgear:green:wan",
- .gpio = WNR2000V3_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan1",
- .gpio = WNR2000V3_GPIO_LED_LAN1_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan2",
- .gpio = WNR2000V3_GPIO_LED_LAN2_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan3",
- .gpio = WNR2000V3_GPIO_LED_LAN3_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan4",
- .gpio = WNR2000V3_GPIO_LED_LAN4_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:green:wps",
- .gpio = WNR2000V3_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan1",
- .gpio = WNR2000V3_GPIO_LED_LAN1_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan2",
- .gpio = WNR2000V3_GPIO_LED_LAN2_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan3",
- .gpio = WNR2000V3_GPIO_LED_LAN3_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan4",
- .gpio = WNR2000V3_GPIO_LED_LAN4_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:amber:wan",
- .gpio = WNR2000V3_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- }
-};
-
-static struct gpio_led wnr2000v3_wmac_leds_gpio[] = {
- {
- .name = "netgear:green:power",
- .gpio = WNR2000V3_GPIO_WMAC_LED_POWER_GREEN,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }, {
- .name = "netgear:amber:test",
- .gpio = WNR2000V3_GPIO_WMAC_LED_TEST_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:blue:wlan",
- .gpio = WNR2000V3_GPIO_WMAC_LED_WLAN_BLUE,
- .active_low = 1,
- }
-};
-
-static struct gpio_led wnr612v2_leds_gpio[] __initdata = {
- {
- .name = "netgear:green:power",
- .gpio = WNR612V2_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan1",
- .gpio = WNR612V2_GPIO_LED_LAN1_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan2",
- .gpio = WNR612V2_GPIO_LED_LAN2_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:wan",
- .gpio = WNR612V2_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }
-};
-
-static struct gpio_led wnr612v2_wmac_leds_gpio[] = {
- {
- .name = "netgear:green:wlan",
- .gpio = WNR612V2_GPIO_WMAC_LED_WLAN_GREEN,
- .active_low = 1,
- }
-};
-
-static struct gpio_led wnr1000v2_leds_gpio[] __initdata = {
- {
- .name = "netgear:amber:lan1",
- .gpio = WNR1000V2_GPIO_LED_LAN1_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan2",
- .gpio = WNR1000V2_GPIO_LED_LAN2_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan3",
- .gpio = WNR1000V2_GPIO_LED_LAN3_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan4",
- .gpio = WNR1000V2_GPIO_LED_LAN4_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:test",
- .gpio = WNR1000V2_GPIO_LED_TEST_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:wan",
- .gpio = WNR1000V2_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan1",
- .gpio = WNR1000V2_GPIO_LED_LAN1_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan2",
- .gpio = WNR1000V2_GPIO_LED_LAN2_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan3",
- .gpio = WNR1000V2_GPIO_LED_LAN3_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan4",
- .gpio = WNR1000V2_GPIO_LED_LAN4_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:power",
- .gpio = WNR1000V2_GPIO_LED_POWER_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:wan",
- .gpio = WNR1000V2_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }
-};
-
-static struct gpio_led wnr1000v2_wmac_leds_gpio[] = {
- {
- .name = "netgear:green:wps",
- .gpio = WNR1000V2_GPIO_WMAC_LED_WPS_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:blue:wlan",
- .gpio = WNR1000V2_GPIO_WMAC_LED_WLAN_BLUE,
- .active_low = 1,
- }
-};
-
-static struct gpio_led wpn824n_leds_gpio[] __initdata = {
- {
- .name = "netgear:amber:wan",
- .gpio = WPN824N_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:status",
- .gpio = WPN824N_GPIO_LED_STATUS_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan1",
- .gpio = WPN824N_GPIO_LED_LAN1_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan2",
- .gpio = WPN824N_GPIO_LED_LAN2_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan3",
- .gpio = WPN824N_GPIO_LED_LAN3_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan4",
- .gpio = WPN824N_GPIO_LED_LAN4_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan1",
- .gpio = WPN824N_GPIO_LED_LAN1_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan2",
- .gpio = WPN824N_GPIO_LED_LAN2_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan3",
- .gpio = WPN824N_GPIO_LED_LAN3_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan4",
- .gpio = WPN824N_GPIO_LED_LAN4_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:wan",
- .gpio = WPN824N_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }
-};
-
-static struct gpio_led wpn824n_wmac_leds_gpio[] = {
- {
- .name = "netgear:green:power",
- .gpio = WPN824N_WGPIO_LED_PWR_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:blue:wps1",
- .gpio = WPN824N_WGPIO_LED_WPS1_BLUE,
- .active_low = 1,
- }, {
- .name = "netgear:blue:wps2",
- .gpio = WPN824N_WGPIO_LED_WPS2_BLUE,
- .active_low = 1,
- }, {
- .name = "netgear:amber:test",
- .gpio = WPN824N_WGPIO_LED_TEST_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:blue:wlan",
- .gpio = WPN824N_WGPIO_LED_WLAN_BLUE,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wnr2000v3_keys_gpio[] __initdata = {
- {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR2000V3_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wnr2000v3_wmac_keys_gpio[] = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR2000V3_GPIO_WMAC_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "rfkill",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR2000V3_GPIO_WMAC_BTN_RFKILL,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wnr612v2_wmac_keys_gpio[] = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR612V2_GPIO_WMAC_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wnr1000v2_wmac_keys_gpio[] = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR1000V2_GPIO_WMAC_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "rfkill",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR1000V2_GPIO_WMAC_BTN_RFKILL,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR1000V2_GPIO_WMAC_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wpn824n_wmac_keys_gpio[] = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPN824N_WGPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "rfkill",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPN824N_WGPIO_BTN_WLAN,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPN824N_WGPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-/*
- * For WNR2000v3 ART flash area used for WLAN MAC is usually empty (0xff)
- * so ath9k driver uses random MAC instead each time module is loaded.
- * To fix that, assign permanent WLAN MAC equal to ethN's MAC plus 1,
- * so network interfaces get sequential addresses.
- * If ART wireless MAC address field has been filled by user, use it.
- */
-static void __init wnr_get_wmac(u8 *wmac_gen_addr, int mac0_art_offset,
- int mac1_art_offset, int wmac_art_offset)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *eth0_mac_addr = (u8 *) (art + mac0_art_offset);
- u8 *eth1_mac_addr = (u8 *) (art + mac1_art_offset);
- u8 *wlan_mac_addr = (u8 *) (art + wmac_art_offset);
-
- /* only 0xff if all bits are set - address is invalid, empty area */
- if ((wlan_mac_addr[0] & wlan_mac_addr[1] & wlan_mac_addr[2] &
- wlan_mac_addr[3] & wlan_mac_addr[4] & wlan_mac_addr[5]) == 0xff) {
- memcpy(wmac_gen_addr, eth0_mac_addr, 5);
- wmac_gen_addr[5] = max(eth0_mac_addr[5], eth1_mac_addr[5]) + 1;
-
- /* Avoid potential conflict in case max(0xff,0x00)+1==0x00 */
- if (!wmac_gen_addr[5])
- wmac_gen_addr[5] = 1;
- } else
- memcpy(wmac_gen_addr, wlan_mac_addr, 6);
-}
-
-static void __init wnr_common_setup(u8 *wmac_addr)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2000V3_MAC0_OFFSET, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2000V3_MAC1_OFFSET, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(NULL);
- ap91_pci_init(art + WNR2000V3_PCIE_CALDATA_OFFSET, wmac_addr);
-}
-
-static void __init wnr2000v3_setup(void)
-{
- u8 wlan_mac_addr[6];
-
- /*
- * Disable JTAG to use all AR724X GPIO LEDs.
- * Also disable CLKs and bit 20 as u-boot does.
- * Finally, allow OS to control all link LEDs.
- */
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE |
- AR724X_GPIO_FUNC_UART_EN,
- AR724X_GPIO_FUNC_CLK_OBS1_EN |
- AR724X_GPIO_FUNC_CLK_OBS2_EN |
- AR724X_GPIO_FUNC_CLK_OBS3_EN |
- AR724X_GPIO_FUNC_CLK_OBS4_EN |
- AR724X_GPIO_FUNC_CLK_OBS5_EN |
- AR724X_GPIO_FUNC_GE0_MII_CLK_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN |
- BIT(20));
-
- wnr_get_wmac(wlan_mac_addr, WNR2000V3_MAC0_OFFSET,
- WNR2000V3_MAC1_OFFSET, WNR2000V3_WMAC_OFFSET);
-
- wnr_common_setup(wlan_mac_addr);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000v3_leds_gpio),
- wnr2000v3_leds_gpio);
-
- /* Do not use id=-1, we can have more GPIO key-polled devices */
- ath79_register_gpio_keys_polled(PLATFORM_DEVID_AUTO,
- WNR2000V3_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wnr2000v3_keys_gpio),
- wnr2000v3_keys_gpio);
-
- ap9x_pci_setup_wmac_leds(0, wnr2000v3_wmac_leds_gpio,
- ARRAY_SIZE(wnr2000v3_wmac_leds_gpio));
-
- ap9x_pci_setup_wmac_btns(0, wnr2000v3_wmac_keys_gpio,
- ARRAY_SIZE(wnr2000v3_wmac_keys_gpio),
- WNR2000V3_KEYS_POLL_INTERVAL);
-}
-
-MIPS_MACHINE(ATH79_MACH_WNR2000_V3, "WNR2000V3", "NETGEAR WNR2000 V3", wnr2000v3_setup);
-
-static void __init wnr612v2_setup(void)
-{
- u8 wlan_mac_addr[6];
-
- /*
- * Disable JTAG and CLKs. Allow OS to control all link LEDs.
- * Note: U-Boot for WNR612v2 sets undocumented bit 15 but
- * we leave it for now.
- */
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE |
- AR724X_GPIO_FUNC_UART_EN,
- AR724X_GPIO_FUNC_CLK_OBS1_EN |
- AR724X_GPIO_FUNC_CLK_OBS2_EN |
- AR724X_GPIO_FUNC_CLK_OBS3_EN |
- AR724X_GPIO_FUNC_CLK_OBS4_EN |
- AR724X_GPIO_FUNC_CLK_OBS5_EN |
- AR724X_GPIO_FUNC_GE0_MII_CLK_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- wnr_get_wmac(wlan_mac_addr, WNR2000V3_MAC0_OFFSET,
- WNR2000V3_MAC1_OFFSET, WNR2000V3_WMAC_OFFSET);
-
- wnr_common_setup(wlan_mac_addr);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr612v2_leds_gpio),
- wnr612v2_leds_gpio);
-
- ap9x_pci_setup_wmac_leds(0, wnr612v2_wmac_leds_gpio,
- ARRAY_SIZE(wnr612v2_wmac_leds_gpio));
-
- ap9x_pci_setup_wmac_btns(0, wnr612v2_wmac_keys_gpio,
- ARRAY_SIZE(wnr612v2_wmac_keys_gpio),
- WNR2000V3_KEYS_POLL_INTERVAL);
-}
-
-MIPS_MACHINE(ATH79_MACH_WNR612_V2, "WNR612V2", "NETGEAR WNR612 V2", wnr612v2_setup);
-
-static void __init wnr1000v2_setup(void)
-{
- u8 wlan_mac_addr[6];
-
- /*
- * Disable JTAG and CLKs. Allow OS to control all link LEDs.
- * Note: U-Boot for WNR1000v2 sets undocumented bit 15 but
- * we leave it for now.
- */
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE |
- AR724X_GPIO_FUNC_UART_EN,
- AR724X_GPIO_FUNC_CLK_OBS1_EN |
- AR724X_GPIO_FUNC_CLK_OBS2_EN |
- AR724X_GPIO_FUNC_CLK_OBS3_EN |
- AR724X_GPIO_FUNC_CLK_OBS4_EN |
- AR724X_GPIO_FUNC_CLK_OBS5_EN |
- AR724X_GPIO_FUNC_GE0_MII_CLK_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- wnr_get_wmac(wlan_mac_addr, WNR2000V3_MAC0_OFFSET,
- WNR2000V3_MAC1_OFFSET, WNR2000V3_WMAC_OFFSET);
-
- wnr_common_setup(wlan_mac_addr);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr1000v2_leds_gpio),
- wnr1000v2_leds_gpio);
-
- ap9x_pci_setup_wmac_leds(0, wnr1000v2_wmac_leds_gpio,
- ARRAY_SIZE(wnr1000v2_wmac_leds_gpio));
-
- /* All 3 buttons are connected to wireless chip */
- ap9x_pci_setup_wmac_btns(0, wnr1000v2_wmac_keys_gpio,
- ARRAY_SIZE(wnr1000v2_wmac_keys_gpio),
- WNR2000V3_KEYS_POLL_INTERVAL);
-}
-
-MIPS_MACHINE(ATH79_MACH_WNR1000_V2, "WNR1000V2", "NETGEAR WNR1000 V2", wnr1000v2_setup);
-
-static void __init wpn824n_setup(void)
-{
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE,
- AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN |
- AR724X_GPIO_FUNC_CLK_OBS3_EN);
-
- wnr_common_setup(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wpn824n_leds_gpio),
- wpn824n_leds_gpio);
-
- ap9x_pci_setup_wmac_leds(0, wpn824n_wmac_leds_gpio,
- ARRAY_SIZE(wpn824n_wmac_leds_gpio));
- ap9x_pci_setup_wmac_btns(0, wpn824n_wmac_keys_gpio,
- ARRAY_SIZE(wpn824n_wmac_keys_gpio),
- WNR2000V3_KEYS_POLL_INTERVAL);
-}
-
-MIPS_MACHINE(ATH79_MACH_WPN824N, "WPN824N", "NETGEAR WPN824N", wpn824n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c
deleted file mode 100644
index c5159a30ca..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v4.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * NETGEAR WNR2000v4 board support
- *
- * Copyright (C) 2015 Michael Bazzinotti <mbazzinotti@gmail.com>
- * Copyright (C) 2014 Michaël Burtin <mburtin@gmail.com>
- * Copyright (C) 2013 Mathieu Olivari <mathieu.olivari@gmail.com>
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-/* AR9341 GPIOs */
-#define WNR2000V4_GPIO_LED_PWR_GREEN 0
-#define WNR2000V4_GPIO_LED_PWR_AMBER 1
-#define WNR2000V4_GPIO_LED_WPS 2
-#define WNR2000V4_GPIO_LED_WLAN 12
-#define WNR2000V4_GPIO_LED_LAN1_GREEN 13
-#define WNR2000V4_GPIO_LED_LAN2_GREEN 14
-#define WNR2000V4_GPIO_LED_LAN3_GREEN 15
-#define WNR2000V4_GPIO_LED_LAN4_GREEN 16
-#define WNR2000V4_GPIO_LED_LAN1_AMBER 18
-#define WNR2000V4_GPIO_LED_LAN2_AMBER 19
-#define WNR2000V4_GPIO_LED_LAN3_AMBER 20
-#define WNR2000V4_GPIO_LED_LAN4_AMBER 21
-#define WNR2000V4_GPIO_LED_WAN_GREEN 17
-#define WNR2000V4_GPIO_LED_WAN_AMBER 22
-/* Buttons */
-#define WNR2000V4_GPIO_BTN_WPS 3
-#define WNR2000V4_GPIO_BTN_RESET 4
-#define WNR2000V4_GPIO_BTN_WLAN 11
-#define WNR2000V4_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WNR2000V4_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000V4_KEYS_POLL_INTERVAL)
-
-
-/* ART offsets */
-#define WNR2000V4_MAC0_OFFSET 0 /* WAN/WLAN0 MAC */
-#define WNR2000V4_MAC1_OFFSET 6 /* Eth-switch0 MAC */
-
-static struct gpio_led wnr2000v4_leds_gpio[] __initdata = {
- {
- .name = "netgear:green:power",
- .gpio = WNR2000V4_GPIO_LED_PWR_GREEN,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "netgear:amber:status",
- .gpio = WNR2000V4_GPIO_LED_PWR_AMBER,
- .active_low = 1,
- },
- {
- .name = "netgear:green:wan",
- .gpio = WNR2000V4_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- },
- {
- .name = "netgear:amber:wan",
- .gpio = WNR2000V4_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- },
- {
- .name = "netgear:blue:wlan",
- .gpio = WNR2000V4_GPIO_LED_WLAN,
- .active_low = 1,
- },
- /* LAN LEDS */
- {
- .name = "netgear:green:lan1",
- .gpio = WNR2000V4_GPIO_LED_LAN1_GREEN,
- .active_low = 1,
- },
- {
- .name = "netgear:green:lan2",
- .gpio = WNR2000V4_GPIO_LED_LAN2_GREEN,
- .active_low = 1,
- },
- {
- .name = "netgear:green:lan3",
- .gpio = WNR2000V4_GPIO_LED_LAN3_GREEN,
- .active_low = 1,
- },
- {
- .name = "netgear:green:lan4",
- .gpio = WNR2000V4_GPIO_LED_LAN4_GREEN,
- .active_low = 1,
- },
- {
- .name = "netgear:amber:lan1",
- .gpio = WNR2000V4_GPIO_LED_LAN1_AMBER,
- .active_low = 1,
- },
- {
- .name = "netgear:amber:lan2",
- .gpio = WNR2000V4_GPIO_LED_LAN2_AMBER,
- .active_low = 1,
- },
- {
- .name = "netgear:amber:lan3",
- .gpio = WNR2000V4_GPIO_LED_LAN3_AMBER,
- .active_low = 1,
- },
- {
- .name = "netgear:amber:lan4",
- .gpio = WNR2000V4_GPIO_LED_LAN4_AMBER,
- .active_low = 1,
- },
- {
- .name = "netgear:green:wps",
- .gpio = WNR2000V4_GPIO_LED_WPS,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button wnr2000v4_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR2000V4_GPIO_BTN_WPS,
- .active_low = 1,
- },
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR2000V4_GPIO_BTN_RESET,
- .active_low = 1,
- },
- {
- .desc = "WLAN button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = WNR2000V4_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR2000V4_GPIO_BTN_WLAN,
- .active_low = 1,
- },
-};
-
-static void __init wnr_common_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_mdio(1, 0x0);
-
- ath79_register_usb();
-
- ath79_register_m25p80(NULL);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art+WNR2000V4_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art+WNR2000V4_MAC1_OFFSET, 0);
-
- /* GMAC0 is connected to the PHY0 of the internal switch, GE0 */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_switch_data.phy_poll_mask = BIT(4);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the internal switch, GE1 */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_register_eth(1);
-
- ath79_register_wmac(ee, art);
-}
-
-static void __init wnr2000v4_setup(void)
-{
- int i;
-
- wnr_common_setup();
-
- /* Ensure no LED has an internal MUX signal, otherwise
- control of LED could be lost... This is especially important
- for most green LEDS (Eth,WAN).. who arrive in this function with
- MUX signals set. */
- for (i = 0; i < ARRAY_SIZE(wnr2000v4_leds_gpio); i++)
- ath79_gpio_output_select(wnr2000v4_leds_gpio[i].gpio,
- AR934X_GPIO_OUT_GPIO);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000v4_leds_gpio),
- wnr2000v4_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WNR2000V4_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wnr2000v4_gpio_keys),
- wnr2000v4_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_WNR2000_V4, "WNR2000V4", "NETGEAR WNR2000 V4", wnr2000v4_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000.c
deleted file mode 100644
index 6e3becab3a..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * NETGEAR WNR2000 board support
- *
- * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- * Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WNR2000_GPIO_LED_PWR_GREEN 14
-#define WNR2000_GPIO_LED_PWR_AMBER 7
-#define WNR2000_GPIO_LED_WPS 4
-#define WNR2000_GPIO_LED_WLAN 6
-#define WNR2000_GPIO_BTN_RESET 21
-#define WNR2000_GPIO_BTN_WPS 8
-
-#define WNR2000_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WNR2000_KEYS_DEBOUNCE_INTERVAL (3 * WNR2000_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wnr2000_leds_gpio[] __initdata = {
- {
- .name = "netgear:green:power",
- .gpio = WNR2000_GPIO_LED_PWR_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:amber:power",
- .gpio = WNR2000_GPIO_LED_PWR_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:green:wps",
- .gpio = WNR2000_GPIO_LED_WPS,
- .active_low = 1,
- }, {
- .name = "netgear:blue:wlan",
- .gpio = WNR2000_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wnr2000_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR2000_GPIO_BTN_RESET,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WNR2000_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR2000_GPIO_BTN_WPS,
- }
-};
-
-static void __init wnr2000_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, eeprom, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.has_ar8216 = 1;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, eeprom, 1);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio),
- wnr2000_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WNR2000_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wnr2000_gpio_keys),
- wnr2000_gpio_keys);
-
- ath79_register_wmac(eeprom, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c
deleted file mode 100644
index 74166c5376..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * NETGEAR WNR2200 board support
- *
- * Copyright (C) 2013 Aidan Kissane <aidankissane at googlemail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/kernel.h> /* for max() macro */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h> /* needed to disable switch LEDs */
-#include "common.h" /* needed to disable switch LEDs */
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-/* WNR2200 - connected through AR7241 */
-#define WNR2200_GPIO_LED_LAN2_AMBER 0
-#define WNR2200_GPIO_LED_LAN4_AMBER 1
-#define WNR2200_GPIO_LED_LAN1_AMBER 6 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
-#define WNR2200_GPIO_LED_WPS_GREEN 7 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
-#define WNR2200_GPIO_LED_USB_GREEN 8 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
-#define WNR2200_GPIO_LED_LAN3_AMBER 11
-#define WNR2200_GPIO_LED_WAN_AMBER 12
-#define WNR2200_GPIO_LED_LAN1_GREEN 13 /* AR724X_..._ETH_SWITCH_LED0 */
-#define WNR2200_GPIO_LED_LAN2_GREEN 14 /* AR724X_..._ETH_SWITCH_LED1 */
-#define WNR2200_GPIO_LED_LAN3_GREEN 15 /* AR724X_..._ETH_SWITCH_LED2 */
-#define WNR2200_GPIO_LED_LAN4_GREEN 16 /* AR724X_..._ETH_SWITCH_LED3 */
-#define WNR2200_GPIO_LED_WAN_GREEN 17 /* AR724X_..._ETH_SWITCH_LED4 */
-
-/* WNR2200 - connected through AR9287 */
-#define WNR2200_GPIO_WMAC_LED_WLAN_BLUE 0
-#define WNR2200_GPIO_WMAC_LED_TEST_AMBER 1
-#define WNR2200_GPIO_WMAC_LED_POWER_GREEN 2
-#define WNR2200_GPIO_WMAC_BTN_RFKILL 3
-#define WNR2200_GPIO_WMAC_USB_5V 4
-#define WNR2200_GPIO_WMAC_BTN_WPS 5
-#define WNR2200_GPIO_WMAC_BTN_RESET 6
-
-#define WNR2200_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WNR2200_KEYS_DEBOUNCE_INTERVAL (3 * WNR2200_KEYS_POLL_INTERVAL)
-
-#define WNR2200_MAC0_OFFSET 0
-#define WNR2200_MAC1_OFFSET 6
-#define WNR2200_PCIE_CALDATA_OFFSET 0x1000
-#define WNR2200_WMAC_OFFSET 0x108c /* wireless MAC is inside ART */
-
-static struct gpio_led wnr2200_leds_gpio[] __initdata = {
- {
- .name = "netgear:amber:lan1",
- .gpio = WNR2200_GPIO_LED_LAN1_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan2",
- .gpio = WNR2200_GPIO_LED_LAN2_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan3",
- .gpio = WNR2200_GPIO_LED_LAN3_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:lan4",
- .gpio = WNR2200_GPIO_LED_LAN4_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:amber:wan",
- .gpio = WNR2200_GPIO_LED_WAN_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan1",
- .gpio = WNR2200_GPIO_LED_LAN1_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan2",
- .gpio = WNR2200_GPIO_LED_LAN2_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan3",
- .gpio = WNR2200_GPIO_LED_LAN3_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:lan4",
- .gpio = WNR2200_GPIO_LED_LAN4_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:usb",
- .gpio = WNR2200_GPIO_LED_USB_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:wan",
- .gpio = WNR2200_GPIO_LED_WAN_GREEN,
- .active_low = 1,
- }, {
- .name = "netgear:green:wps",
- .gpio = WNR2200_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- }
-};
-
-static struct gpio_led wnr2200_wmac_leds_gpio[] = {
- {
- .name = "netgear:amber:test",
- .gpio = WNR2200_GPIO_WMAC_LED_TEST_AMBER,
- .active_low = 1,
- }, {
- .name = "netgear:green:power",
- .gpio = WNR2200_GPIO_WMAC_LED_POWER_GREEN,
- .active_low = 1,
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }, {
- .name = "netgear:blue:wlan",
- .gpio = WNR2200_GPIO_WMAC_LED_WLAN_BLUE,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wnr2200_wmac_keys_gpio[] = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WNR2200_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR2200_GPIO_WMAC_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "rfkill",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = WNR2200_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR2200_GPIO_WMAC_BTN_RFKILL,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WNR2200_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WNR2200_GPIO_WMAC_BTN_WPS,
- .active_low = 1,
- }
-};
-
-/*
- * For WNR2200 ART flash area used for WLAN MAC is usually empty (0xff)
- * so ath9k driver uses random MAC instead each time module is loaded.
- * OpenWrt's original fix was to copy eth1 address to WLAN interface.
- * New solution does not duplicate hardware addresses and is taken from
- * WNR2000v3 code. It assigns permanent WLAN MAC equal to ethN's MAC
- * plus 1, so network interfaces get sequential addresses.
- * If ART wireless MAC address field has been filled by user, use it.
- */
-static void __init wnr2200_get_wmac(u8 *wmac_gen_addr, int mac0_art_offset,
- int mac1_art_offset, int wmac_art_offset)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *eth0_mac_addr = (u8 *) (art + mac0_art_offset);
- u8 *eth1_mac_addr = (u8 *) (art + mac1_art_offset);
- u8 *wlan_mac_addr = (u8 *) (art + wmac_art_offset);
-
- /* only 0xff if all bits are set - address is invalid, empty area */
- if ((wlan_mac_addr[0] & wlan_mac_addr[1] & wlan_mac_addr[2] &
- wlan_mac_addr[3] & wlan_mac_addr[4] & wlan_mac_addr[5]) == 0xff) {
- memcpy(wmac_gen_addr, eth0_mac_addr, 5);
- wmac_gen_addr[5] = max(eth0_mac_addr[5], eth1_mac_addr[5]) + 1;
-
- /* Avoid potential conflict in case max(0xff,0x00)+1==0x00 */
- if (!wmac_gen_addr[5])
- wmac_gen_addr[5] = 1;
- } else
- memcpy(wmac_gen_addr, wlan_mac_addr, 6);
-}
-
-static void __init wnr2200_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 wlan_mac_addr[6];
-
- /*
- * Disable JTAG to use all AR724X GPIO LEDs. Disable CLKs.
- * Allow OS to control all link LEDs.
- */
- ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE |
- AR724X_GPIO_FUNC_UART_EN,
- AR724X_GPIO_FUNC_CLK_OBS1_EN |
- AR724X_GPIO_FUNC_CLK_OBS2_EN |
- AR724X_GPIO_FUNC_CLK_OBS3_EN |
- AR724X_GPIO_FUNC_CLK_OBS4_EN |
- AR724X_GPIO_FUNC_CLK_OBS5_EN |
- AR724X_GPIO_FUNC_GE0_MII_CLK_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + WNR2200_MAC0_OFFSET, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, art + WNR2200_MAC1_OFFSET, 0);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(NULL);
-
- wnr2200_get_wmac(wlan_mac_addr, WNR2200_MAC0_OFFSET,
- WNR2200_MAC1_OFFSET, WNR2200_WMAC_OFFSET);
- ap9x_pci_setup_wmac_led_pin(0, 0);
- ap91_pci_init(art + WNR2200_PCIE_CALDATA_OFFSET, wlan_mac_addr);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2200_leds_gpio),
- wnr2200_leds_gpio);
-
- ap9x_pci_setup_wmac_leds(0, wnr2200_wmac_leds_gpio,
- ARRAY_SIZE(wnr2200_wmac_leds_gpio));
-
- /* All 3 buttons are connected to wireless chip */
- ap9x_pci_setup_wmac_btns(0, wnr2200_wmac_keys_gpio,
- ARRAY_SIZE(wnr2200_wmac_keys_gpio),
- WNR2200_KEYS_POLL_INTERVAL);
-
- /* enable power for the USB port */
- ap9x_pci_setup_wmac_gpio(0, BIT(WNR2200_GPIO_WMAC_USB_5V),
- BIT(WNR2200_GPIO_WMAC_USB_5V));
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_WNR2200, "WNR2200", "NETGEAR WNR2200", wnr2200_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wp543.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wp543.c
deleted file mode 100644
index dc4aee0c1b..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wp543.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Compex WP543/WPJ543 board support
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define WP543_GPIO_SW6 2
-#define WP543_GPIO_LED_1 3
-#define WP543_GPIO_LED_2 4
-#define WP543_GPIO_LED_WLAN 5
-#define WP543_GPIO_LED_CONN 6
-#define WP543_GPIO_LED_DIAG 7
-#define WP543_GPIO_SW4 8
-
-#define WP543_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WP543_KEYS_DEBOUNCE_INTERVAL (3 * WP543_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wp543_leds_gpio[] __initdata = {
- {
- .name = "wp543:green:led1",
- .gpio = WP543_GPIO_LED_1,
- .active_low = 1,
- }, {
- .name = "wp543:green:led2",
- .gpio = WP543_GPIO_LED_2,
- .active_low = 1,
- }, {
- .name = "wp543:green:wlan",
- .gpio = WP543_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "wp543:green:conn",
- .gpio = WP543_GPIO_LED_CONN,
- .active_low = 1,
- }, {
- .name = "wp543:green:diag",
- .gpio = WP543_GPIO_LED_DIAG,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wp543_gpio_keys[] __initdata = {
- {
- .desc = "sw6",
- .type = EV_KEY,
- .code = BTN_0,
- .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WP543_GPIO_SW6,
- .active_low = 1,
- }, {
- .desc = "sw4",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WP543_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WP543_GPIO_SW4,
- .active_low = 1,
- }
-};
-
-static const char *wp543_part_probes[] = {
- "MyLoader",
- NULL,
-};
-
-static struct flash_platform_data wp543_flash_data = {
- .part_probes = wp543_part_probes,
-};
-
-static void __init wp543_setup(void)
-{
- ath79_register_m25p80(&wp543_flash_data);
-
- ath79_register_mdio(0, 0xfffffff0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = 0x0f;
- ath79_eth0_data.reset_bit = AR71XX_RESET_GE0_MAC |
- AR71XX_RESET_GE0_PHY;
- ath79_register_eth(0);
-
- ath79_register_usb();
- ath79_register_pci();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wp543_leds_gpio),
- wp543_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WP543_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wp543_gpio_keys),
- wp543_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_WP543, "WP543", "Compex WP543", wp543_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpe72.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpe72.c
deleted file mode 100644
index 9452484279..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpe72.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Compex WPE72 board support
- *
- * Copyright (C) 2012 Johnathan Boyce<jon.boyce@globalreach.eu.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define WPE72_GPIO_RESET 12
-#define WPE72_GPIO_LED_DIAG 13
-#define WPE72_GPIO_LED_1 14
-#define WPE72_GPIO_LED_2 15
-#define WPE72_GPIO_LED_3 16
-#define WPE72_GPIO_LED_4 17
-
-#define WPE72_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WPE72_KEYS_DEBOUNCE_INTERVAL (3 * WPE72_KEYS_POLL_INTERVAL)
-
-static struct gpio_led wpe72_leds_gpio[] __initdata = {
- {
- .name = "wpe72:green:led1",
- .gpio = WPE72_GPIO_LED_1,
- .active_low = 1,
- }, {
- .name = "wpe72:green:led2",
- .gpio = WPE72_GPIO_LED_2,
- .active_low = 1,
- }, {
- .name = "wpe72:green:led3",
- .gpio = WPE72_GPIO_LED_3,
- .active_low = 1,
- }, {
- .name = "wpe72:green:led4",
- .gpio = WPE72_GPIO_LED_4,
- .active_low = 1,
- }, {
- .name = "wpe72:green:diag",
- .gpio = WPE72_GPIO_LED_DIAG,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wpe72_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WPE72_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPE72_GPIO_RESET,
- .active_low = 1,
- }
-};
-
-static const char *wpe72_part_probes[] = {
- "MyLoader",
- NULL,
-};
-
-static struct flash_platform_data wpe72_flash_data = {
- .part_probes = wpe72_part_probes,
-};
-
-static void __init wpe72_setup(void)
-{
- ath79_register_m25p80(&wpe72_flash_data);
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_usb();
- ath79_register_pci();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wpe72_leds_gpio),
- wpe72_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WPE72_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wpe72_gpio_keys),
- wpe72_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_WPE72, "WPE72", "Compex WPE72", wpe72_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj342.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj342.c
deleted file mode 100644
index 65d6478867..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj342.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Compex WPJ342 board support
- *
- * Copyright (c) 2011 Qualcomm Atheros
- * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <linux/export.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "pci.h"
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-nfc.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WPJ342_GPIO_LED_STATUS 11
-#define WPJ342_GPIO_LED_SIG1 14
-#define WPJ342_GPIO_LED_SIG2 13
-#define WPJ342_GPIO_LED_SIG3 12
-#define WPJ342_GPIO_LED_SIG4 11
-#define WPJ342_GPIO_BUZZER 15
-
-#define WPJ342_GPIO_BTN_RESET 17
-
-#define WPJ342_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WPJ342_KEYS_DEBOUNCE_INTERVAL (3 * WPJ342_KEYS_POLL_INTERVAL)
-
-#define WPJ342_MAC0_OFFSET 0x10
-#define WPJ342_MAC1_OFFSET 0x18
-#define WPJ342_WMAC_CALDATA_OFFSET 0x1000
-#define WPJ342_PCIE_CALDATA_OFFSET 0x5000
-
-#define WPJ342_ART_SIZE 0x8000
-
-static struct gpio_led wpj342_leds_gpio[] __initdata = {
- {
- .name = "wpj342:red:sig1",
- .gpio = WPJ342_GPIO_LED_SIG1,
- .active_low = 1,
- },
- {
- .name = "wpj342:yellow:sig2",
- .gpio = WPJ342_GPIO_LED_SIG2,
- .active_low = 1,
- },
- {
- .name = "wpj342:green:sig3",
- .gpio = WPJ342_GPIO_LED_SIG3,
- .active_low = 1,
- },
- {
- .name = "wpj342:green:sig4",
- .gpio = WPJ342_GPIO_LED_SIG4,
- .active_low = 1,
- },
- {
- .name = "wpj342:buzzer",
- .gpio = WPJ342_GPIO_BUZZER,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button wpj342_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WPJ342_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPJ342_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg wpj342_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_led_cfg wpj342_ar8327_led_cfg = {
- .led_ctrl0 = 0x00000000,
- .led_ctrl1 = 0xc737c737,
- .led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x00c30c00,
- .open_drain = true,
-};
-
-static struct ar8327_platform_data wpj342_ar8327_data = {
- .pad0_cfg = &wpj342_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &wpj342_ar8327_led_cfg,
-};
-
-static struct mdio_board_info wpj342_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &wpj342_ar8327_data,
- },
-};
-
-
-static void __init wpj342_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000);
-
- ath79_register_m25p80(NULL);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj342_leds_gpio),
- wpj342_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WPJ342_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wpj342_gpio_keys),
- wpj342_gpio_keys);
-
- ath79_register_usb();
-
- ath79_register_wmac(art + WPJ342_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_pci();
-
- mdiobus_register_board_info(wpj342_mdio0_info,
- ARRAY_SIZE(wpj342_mdio0_info));
-
- ath79_register_mdio(1, 0x0);
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ342_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ342_MAC1_OFFSET, 0);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0);
-
- /* GMAC0 is connected to an AR8236 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
-
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_WPJ342, "WPJ342", "Compex WPJ342", wpj342_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj344.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj344.c
deleted file mode 100644
index ffb9ef6dfa..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj344.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * Compex WPJ344 board support
- *
- * Copyright (c) 2011 Qualcomm Atheros
- * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/phy.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-usb.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WPJ344_GPIO_LED_SIG1 15
-#define WPJ344_GPIO_LED_SIG2 20
-#define WPJ344_GPIO_LED_SIG3 21
-#define WPJ344_GPIO_LED_SIG4 22
-#define WPJ344_GPIO_LED_STATUS 14
-
-#define WPJ344_GPIO_BTN_RESET 12
-
-#define WPJ344_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WPJ344_KEYS_DEBOUNCE_INTERVAL (3 * WPJ344_KEYS_POLL_INTERVAL)
-
-#define WPJ344_MAC0_OFFSET 0x10
-#define WPJ344_MAC1_OFFSET 0x18
-#define WPJ344_WMAC_CALDATA_OFFSET 0x1000
-#define WPJ344_PCIE_CALDATA_OFFSET 0x5000
-
-static struct gpio_led wpj344_leds_gpio[] __initdata = {
- {
- .name = "wpj344:green:status",
- .gpio = WPJ344_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "wpj344:red:sig1",
- .gpio = WPJ344_GPIO_LED_SIG1,
- .active_low = 1,
- },
- {
- .name = "wpj344:yellow:sig2",
- .gpio = WPJ344_GPIO_LED_SIG2,
- .active_low = 1,
- },
- {
- .name = "wpj344:green:sig3",
- .gpio = WPJ344_GPIO_LED_SIG3,
- .active_low = 1,
- },
- {
- .name = "wpj344:green:sig4",
- .gpio = WPJ344_GPIO_LED_SIG4,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wpj344_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WPJ344_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPJ344_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg wpj344_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- .mac06_exchange_dis = true,
-};
-
-static struct ar8327_led_cfg wpj344_ar8327_led_cfg = {
- .led_ctrl0 = 0x00000000,
- .led_ctrl1 = 0xc737c737,
- .led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x00c30c00,
- .open_drain = true,
-};
-
-static struct ar8327_platform_data wpj344_ar8327_data = {
- .pad0_cfg = &wpj344_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &wpj344_ar8327_led_cfg,
-};
-
-static struct mdio_board_info wpj344_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &wpj344_ar8327_data,
- },
-};
-
-static void __init wpj344_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000);
-
- ath79_register_m25p80(NULL);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj344_leds_gpio),
- wpj344_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WPJ344_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wpj344_gpio_keys),
- wpj344_gpio_keys);
-
- ath79_register_usb();
-
- ath79_register_wmac(art + WPJ344_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_pci();
-
- mdiobus_register_board_info(wpj344_mdio0_info,
- ARRAY_SIZE(wpj344_mdio0_info));
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ344_MAC0_OFFSET, 0);
-
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_SW_ONLY_MODE);
-
- /* GMAC0 is connected to an AR8327 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
-
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_WPJ344, "WPJ344", "Compex WPJ344", wpj344_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c
deleted file mode 100644
index 351293230f..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Compex WPJ531 board support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "pci.h"
-#include "common.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WPJ531_GPIO_LED_SIG1 12
-#define WPJ531_GPIO_LED_SIG2 14
-#define WPJ531_GPIO_LED_SIG3 15
-#define WPJ531_GPIO_LED_SIG4 16
-#define WPJ531_GPIO_BUZZER 4
-
-#define WPJ531_GPIO_BTN_RESET 17
-
-#define WPJ531_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WPJ531_KEYS_DEBOUNCE_INTERVAL (3 * WPJ531_KEYS_POLL_INTERVAL)
-
-#define WPJ531_MAC0_OFFSET 0x10
-#define WPJ531_MAC1_OFFSET 0x18
-#define WPJ531_WMAC_CALDATA_OFFSET 0x1000
-#define WPJ531_PCIE_CALDATA_OFFSET 0x5000
-
-#define WPJ531_ART_SIZE 0x8000
-
-static struct gpio_led wpj531_leds_gpio[] __initdata = {
- {
- .name = "wpj531:red:sig1",
- .gpio = WPJ531_GPIO_LED_SIG1,
- .active_low = 1,
- },
- {
- .name = "wpj531:yellow:sig2",
- .gpio = WPJ531_GPIO_LED_SIG2,
- .active_low = 1,
- },
- {
- .name = "wpj531:green:sig3",
- .gpio = WPJ531_GPIO_LED_SIG3,
- .active_low = 1,
- },
- {
- .name = "wpj531:green:sig4",
- .gpio = WPJ531_GPIO_LED_SIG4,
- .active_low = 1,
- },
- {
- .name = "wpj531:buzzer",
- .gpio = WPJ531_GPIO_BUZZER,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button wpj531_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WPJ531_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPJ531_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init common_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000);
-
- ath79_register_m25p80(NULL);
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN */
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ531_MAC0_OFFSET, 0);
- ath79_register_eth(0);
-
- /* WAN */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ531_MAC1_OFFSET, 0);
- ath79_register_eth(1);
-
- ath79_register_wmac(art + WPJ531_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_pci();
- ath79_register_usb();
-}
-
-static void __init wpj531_setup(void)
-{
- common_setup();
-
- ath79_register_leds_gpio(-1,
- ARRAY_SIZE(wpj531_leds_gpio),
- wpj531_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1,
- WPJ531_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wpj531_gpio_keys),
- wpj531_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_WPJ531, "WPJ531", "Compex WPJ531", wpj531_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj558.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj558.c
deleted file mode 100644
index 1839cc6676..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj558.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Compex WPJ558 board support
- *
- * Copyright (c) 2012 Qualcomm Atheros
- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/pci.h>
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "pci.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-eth.h"
-#include "dev-usb.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WPJ558_GPIO_LED_SIG1 14
-#define WPJ558_GPIO_LED_SIG2 15
-#define WPJ558_GPIO_LED_SIG3 22
-#define WPJ558_GPIO_LED_SIG4 23
-#define WPJ558_GPIO_BUZZER 4
-
-#define WPJ558_GPIO_BTN_RESET 17
-
-#define WPJ558_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WPJ558_KEYS_DEBOUNCE_INTERVAL (3 * WPJ558_KEYS_POLL_INTERVAL)
-
-#define WPJ558_MAC_OFFSET 0x10
-#define WPJ558_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led wpj558_leds_gpio[] __initdata = {
- {
- .name = "wpj558:red:sig1",
- .gpio = WPJ558_GPIO_LED_SIG1,
- .active_low = 1,
- },
- {
- .name = "wpj558:yellow:sig2",
- .gpio = WPJ558_GPIO_LED_SIG2,
- .active_low = 1,
- },
- {
- .name = "wpj558:green:sig3",
- .gpio = WPJ558_GPIO_LED_SIG3,
- .active_low = 1,
- },
- {
- .name = "wpj558:green:sig4",
- .gpio = WPJ558_GPIO_LED_SIG4,
- .active_low = 1,
- },
- {
- .name = "wpj558:buzzer",
- .gpio = WPJ558_GPIO_BUZZER,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button wpj558_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WPJ558_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPJ558_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg wpj558_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_pad_cfg wpj558_ar8327_pad6_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data wpj558_ar8327_data = {
- .pad0_cfg = &wpj558_ar8327_pad0_cfg,
- .pad6_cfg = &wpj558_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info wpj558_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &wpj558_ar8327_data,
- },
-};
-
-static void __init wpj558_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000);
-
- ath79_register_m25p80(NULL);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj558_leds_gpio),
- wpj558_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WPJ558_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wpj558_gpio_keys),
- wpj558_gpio_keys);
-
- ath79_register_usb();
-
- ath79_register_wmac(art + WPJ558_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_pci();
-
- mdiobus_register_board_info(wpj558_mdio0_info,
- ARRAY_SIZE(wpj558_mdio0_info));
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ558_MAC_OFFSET, 0);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- /* GMAC0 is connected to an AR8327 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x56000000;
-
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_WPJ558, "WPJ558", "Compex WPJ558", wpj558_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj563.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj563.c
deleted file mode 100644
index d884be916b..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj563.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * Compex WPJ563 board support
- *
- * Copyright (c) 2015 Qualcomm Atheros
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-#include "pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-
-#define WPJ563_GPIO_LED_SIG1 1
-#define WPJ563_GPIO_LED_SIG2 5
-#define WPJ563_GPIO_LED_SIG3 6
-#define WPJ563_GPIO_LED_SIG4 7
-#define WPJ563_GPIO_BUZZER 19
-
-#define WPJ563_GPIO_BTN_RESET 2
-#define WPJ563_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WPJ563_KEYS_DEBOUNCE_INTERVAL (3 * WPJ563_KEYS_POLL_INTERVAL)
-
-#define WPJ563_MAC0_OFFSET 0x10
-#define WPJ563_MAC1_OFFSET 0x18
-#define WPJ563_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led WPJ563_leds_gpio[] __initdata = {
- {
- .name = "wpj563:green:sig1",
- .gpio = WPJ563_GPIO_LED_SIG1,
- .active_low = 1,
- },
- {
- .name = "wpj563:green:sig2",
- .gpio = WPJ563_GPIO_LED_SIG2,
- .active_low = 1,
- },
- {
- .name = "wpj563:green:sig3",
- .gpio = WPJ563_GPIO_LED_SIG3,
- .active_low = 1,
- },
- {
- .name = "wpj563:green:sig4",
- .gpio = WPJ563_GPIO_LED_SIG4,
- .active_low = 1,
- },
- {
- .name = "wpj563:buzzer",
- .gpio = WPJ563_GPIO_BUZZER,
- .active_low = 0,
- }
-};
-
-static struct gpio_keys_button WPJ563_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WPJ563_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WPJ563_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct ar8327_pad_cfg WPJ563_ar8337_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-static struct ar8327_platform_data WPJ563_ar8337_data = {
- .pad0_cfg = &WPJ563_ar8337_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info WPJ563_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &WPJ563_ar8337_data,
- },
-};
-
-static void __init WPJ563_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(WPJ563_leds_gpio),
- WPJ563_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WPJ563_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(WPJ563_gpio_keys),
- WPJ563_gpio_keys);
-
- ath79_register_usb();
-
- ath79_register_wmac(art + WPJ563_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_pci();
-
- mdiobus_register_board_info(WPJ563_mdio0_info,
- ARRAY_SIZE(WPJ563_mdio0_info));
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ563_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ563_MAC1_OFFSET, 0);
-
- /* GMAC0 is connected to an QCA8334 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_WPJ563, "WPJ563", "Compex WPJ563", WPJ563_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt160nl.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt160nl.c
deleted file mode 100644
index ede3c214c2..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt160nl.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Linksys WRT160NL board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "nvram.h"
-#include "machtypes.h"
-
-#define WRT160NL_GPIO_LED_POWER 14
-#define WRT160NL_GPIO_LED_WPS_AMBER 9
-#define WRT160NL_GPIO_LED_WPS_BLUE 8
-#define WRT160NL_GPIO_LED_WLAN 6
-
-#define WRT160NL_GPIO_BTN_WPS 7
-#define WRT160NL_GPIO_BTN_RESET 21
-
-#define WRT160NL_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WRT160NL_KEYS_DEBOUNCE_INTERVAL (3 * WRT160NL_KEYS_POLL_INTERVAL)
-
-#define WRT160NL_NVRAM_ADDR 0x1f7e0000
-#define WRT160NL_NVRAM_SIZE 0x10000
-
-static const char *wrt160nl_part_probes[] = {
- "cybertan",
- NULL,
-};
-
-static struct flash_platform_data wrt160nl_flash_data = {
- .part_probes = wrt160nl_part_probes,
-};
-
-static struct gpio_led wrt160nl_leds_gpio[] __initdata = {
- {
- .name = "wrt160nl:blue:power",
- .gpio = WRT160NL_GPIO_LED_POWER,
- .active_low = 1,
- .default_trigger = "default-on",
- }, {
- .name = "wrt160nl:amber:wps",
- .gpio = WRT160NL_GPIO_LED_WPS_AMBER,
- .active_low = 1,
- }, {
- .name = "wrt160nl:blue:wps",
- .gpio = WRT160NL_GPIO_LED_WPS_BLUE,
- .active_low = 1,
- }, {
- .name = "wrt160nl:blue:wlan",
- .gpio = WRT160NL_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wrt160nl_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WRT160NL_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wps",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WRT160NL_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WRT160NL_GPIO_BTN_WPS,
- .active_low = 1,
- }
-};
-
-static void __init wrt160nl_setup(void)
-{
- const char *nvram = (char *) KSEG1ADDR(WRT160NL_NVRAM_ADDR);
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 mac[6];
-
- if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
- "lan_hwaddr=", mac) == 0) {
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
- }
-
- ath79_register_mdio(0, 0x0);
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.phy_mask = 0x01;
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(&wrt160nl_flash_data);
-
- ath79_register_usb();
-
- if (ath79_nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
- "wl0_hwaddr=", mac) == 0)
- ath79_register_wmac(eeprom, mac);
- else
- ath79_register_wmac(eeprom, NULL);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
- wrt160nl_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WRT160NL_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wrt160nl_gpio_keys),
- wrt160nl_gpio_keys);
-}
-
-MIPS_MACHINE(ATH79_MACH_WRT160NL, "WRT160NL", "Linksys WRT160NL",
- wrt160nl_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt400n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt400n.c
deleted file mode 100644
index 6c4c1cb0d6..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrt400n.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * Linksys WRT400N board support
- *
- * Copyright (C) 2009-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "machtypes.h"
-
-#define WRT400N_GPIO_LED_POWER 1
-#define WRT400N_GPIO_LED_WPS_BLUE 4
-#define WRT400N_GPIO_LED_WPS_AMBER 5
-#define WRT400N_GPIO_LED_WLAN 6
-
-#define WRT400N_GPIO_BTN_RESET 8
-#define WRT400N_GPIO_BTN_WLSEC 3
-
-#define WRT400N_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WRT400N_KEYS_DEBOUNE_INTERVAL (3 * WRT400N_KEYS_POLL_INTERVAL)
-
-#define WRT400N_MAC_ADDR_OFFSET 0x120c
-#define WRT400N_CALDATA0_OFFSET 0x1000
-#define WRT400N_CALDATA1_OFFSET 0x5000
-
-static struct mtd_partition wrt400n_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = 0x030000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "env",
- .offset = 0x030000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "linux",
- .offset = 0x040000,
- .size = 0x140000,
- }, {
- .name = "rootfs",
- .offset = 0x180000,
- .size = 0x630000,
- }, {
- .name = "nvram",
- .offset = 0x7b0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "factory",
- .offset = 0x7c0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "language",
- .offset = 0x7d0000,
- .size = 0x020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "caldata",
- .offset = 0x7f0000,
- .size = 0x010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x040000,
- .size = 0x770000,
- }
-};
-
-static struct flash_platform_data wrt400n_flash_data = {
- .parts = wrt400n_partitions,
- .nr_parts = ARRAY_SIZE(wrt400n_partitions),
-};
-
-static struct gpio_led wrt400n_leds_gpio[] __initdata = {
- {
- .name = "wrt400n:blue:wps",
- .gpio = WRT400N_GPIO_LED_WPS_BLUE,
- .active_low = 1,
- }, {
- .name = "wrt400n:amber:wps",
- .gpio = WRT400N_GPIO_LED_WPS_AMBER,
- .active_low = 1,
- }, {
- .name = "wrt400n:blue:wlan",
- .gpio = WRT400N_GPIO_LED_WLAN,
- .active_low = 1,
- }, {
- .name = "wrt400n:blue:power",
- .gpio = WRT400N_GPIO_LED_POWER,
- .active_low = 0,
- .default_trigger = "default-on",
- }
-};
-
-static struct gpio_keys_button wrt400n_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
- .gpio = WRT400N_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "wlsec",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WRT400N_KEYS_DEBOUNE_INTERVAL,
- .gpio = WRT400N_GPIO_BTN_WLSEC,
- .active_low = 1,
- }
-};
-
-static void __init wrt400n_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac = art + WRT400N_MAC_ADDR_OFFSET;
-
- ath79_register_mdio(0, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 2);
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_m25p80(&wrt400n_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wrt400n_leds_gpio),
- wrt400n_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WRT400N_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wrt400n_gpio_keys),
- wrt400n_gpio_keys);
-
- ap94_pci_init(art + WRT400N_CALDATA0_OFFSET, NULL,
- art + WRT400N_CALDATA1_OFFSET, NULL);
-}
-
-MIPS_MACHINE(ATH79_MACH_WRT400N, "WRT400N", "Linksys WRT400N", wrt400n_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c
deleted file mode 100644
index 150a28b0d7..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * WRTnode2Q board support
- *
- * Copyright (c) 2013 The Linux Foundation. All rights reserved.
- * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2015 Kelei <xzmu@wrtnode.com>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-#include "pci.h"
-
-#define WRTNODE2Q_GPIO_LED_WLAN 12
-#define WRTNODE2Q_GPIO_LED_WPS 13
-#define WRTNODE2Q_GPIO_LED_STATUS 13
-
-#define WRTNODE2Q_GPIO_LED_WAN 4
-#define WRTNODE2Q_GPIO_LED_LAN1 16
-#define WRTNODE2Q_GPIO_LED_LAN2 15
-#define WRTNODE2Q_GPIO_LED_LAN3 14
-#define WRTNODE2Q_GPIO_LED_LAN4 11
-
-#define WRTNODE2Q_GPIO_BTN_WPS 17
-
-#define WRTNODE2Q_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL (3 * WRTNODE2Q_KEYS_POLL_INTERVAL)
-
-#define WRTNODE2Q_MAC0_OFFSET 0
-#define WRTNODE2Q_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led wrtnode2q_leds_gpio[] __initdata = {
- {
- .name = "wrtnode2q:green:status",
- .gpio = WRTNODE2Q_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "wrtnode2q:green:wlan",
- .gpio = WRTNODE2Q_GPIO_LED_WLAN,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wrtnode2q_gpio_keys[] __initdata = {
- {
- .desc = "WPS button",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WRTNODE2Q_GPIO_BTN_WPS,
- .active_low = 1,
- },
-};
-
-static void __init wrtnode2q_gpio_led_setup(void)
-{
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wrtnode2q_leds_gpio),
- wrtnode2q_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WRTNODE2Q_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wrtnode2q_gpio_keys),
- wrtnode2q_gpio_keys);
-}
-
-static void __init wrtnode2q_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1f040000);
-
- ath79_register_m25p80(NULL);
-
- wrtnode2q_gpio_led_setup();
-
- ath79_register_pci();
- ath79_register_usb();
-
- ath79_register_wmac(art + WRTNODE2Q_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_mdio(0, 0x0);
- ath79_register_mdio(1, 0x0);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 1);
-
- /* LAN ports */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_switch_data.phy4_mii_en = 1;
- ath79_register_eth(1);
-
- /* WAN port */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.speed = SPEED_100;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_register_eth(0);
-}
-
-MIPS_MACHINE(ATH79_MACH_WRTNODE2Q, "WRTNODE2Q", "WRTnode2Q board",
- wrtnode2q_setup); \ No newline at end of file
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-450hp2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-450hp2.c
deleted file mode 100644
index ca45309487..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-450hp2.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * Buffalo WZR-450HP2 board support
- *
- * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * Based on the Qualcomm Atheros AP135/AP136 reference board support code
- * Copyright (c) 2012 Qualcomm Atheros
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- *
- */
-
-#include <linux/phy.h>
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/ar8216_platform.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-spi.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WZR_450HP2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WZR_450HP2_KEYS_DEBOUNCE_INTERVAL (3 * WZR_450HP2_KEYS_POLL_INTERVAL)
-
-#define WZR_450HP2_WMAC_CALDATA_OFFSET 0x1000
-
-static struct mtd_partition wzrhpg450h_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x0040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x0040000,
- .size = 0x0010000,
- }, {
- .name = "ART",
- .offset = 0x0ff0000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0050000,
- .size = 0x0f90000,
- }, {
- .name = "user_property",
- .offset = 0x0fe0000,
- .size = 0x0010000,
- }
-};
-
-static struct flash_platform_data wzr_450hp2_flash_data = {
- .parts = wzrhpg450h_partitions,
- .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions),
-};
-
-static struct gpio_led wzr_450hp2_leds_gpio[] __initdata = {
- {
- .name = "buffalo:green:wps",
- .gpio = 3,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:system",
- .gpio = 20,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:wlan",
- .gpio = 18,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button wzr_450hp2_gpio_keys[] __initdata = {
- {
- .desc = "Reset button",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WZR_450HP2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 17,
- .active_low = 1,
- },
- {
- .desc = "RFKILL button",
- .type = EV_KEY,
- .code = KEY_RFKILL,
- .debounce_interval = WZR_450HP2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 21,
- .active_low = 1,
- },
-};
-
-static const struct ar8327_led_info wzr_450hp2_leds_ar8327[] = {
- AR8327_LED_INFO(PHY0_0, HW, "buffalo:green:lan1"),
- AR8327_LED_INFO(PHY1_0, HW, "buffalo:green:lan2"),
- AR8327_LED_INFO(PHY2_0, HW, "buffalo:green:lan3"),
- AR8327_LED_INFO(PHY3_0, HW, "buffalo:green:lan4"),
- AR8327_LED_INFO(PHY4_0, HW, "buffalo:green:wan"),
-};
-
-/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */
-static struct ar8327_pad_cfg wzr_450hp2_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_SGMII,
- .sgmii_delay_en = true,
-};
-
-/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */
-static struct ar8327_pad_cfg wzr_450hp2_ar8327_pad6_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_led_cfg wzr_450hp2_ar8327_led_cfg = {
- .led_ctrl0 = 0xcc35cc35,
- .led_ctrl1 = 0xca35ca35,
- .led_ctrl2 = 0xc935c935,
- .led_ctrl3 = 0x03ffff00,
- .open_drain = true,
-};
-
-static struct ar8327_platform_data wzr_450hp2_ar8327_data = {
- .pad0_cfg = &wzr_450hp2_ar8327_pad0_cfg,
- .pad6_cfg = &wzr_450hp2_ar8327_pad6_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .port6_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
- .led_cfg = &wzr_450hp2_ar8327_led_cfg,
- .num_leds = ARRAY_SIZE(wzr_450hp2_leds_ar8327),
- .leds = wzr_450hp2_leds_ar8327,
-};
-
-static struct mdio_board_info wzr_450hp2_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = 0,
- .platform_data = &wzr_450hp2_ar8327_data,
- },
-};
-
-static void __init wzr_450hp2_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
- u8 *mac_wan = art;
- u8 *mac_lan = mac_wan + ETH_ALEN;
-
- ath79_register_m25p80(&wzr_450hp2_flash_data);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wzr_450hp2_leds_gpio),
- wzr_450hp2_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WZR_450HP2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wzr_450hp2_gpio_keys),
- wzr_450hp2_gpio_keys);
-
- ath79_register_wmac(art + WZR_450HP2_WMAC_CALDATA_OFFSET, mac_lan);
-
- mdiobus_register_board_info(wzr_450hp2_mdio0_info,
- ARRAY_SIZE(wzr_450hp2_mdio0_info));
- ath79_register_mdio(0, 0x0);
-
- ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
- /* GMAC0 is connected to the RMGII interface */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(0);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x56000000;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac_wan, 0);
- ath79_register_eth(0);
-
- /* GMAC1 is connected to the SGMII interface */
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
- ath79_eth1_data.speed = SPEED_1000;
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_pll_data.pll_1000 = 0x03000101;
-
- ath79_init_mac(ath79_eth1_data.mac_addr, mac_lan, 0);
- ath79_register_eth(1);
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_WZR_450HP2, "WZR-450HP2",
- "Buffalo WZR-450HP2", wzr_450hp2_setup);
-
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c
deleted file mode 100644
index a9ed3fdd46..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-ag300h.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * Buffalo WZR-HP-AG300H board support
- *
- * Copyright (C) 2011 Felix Fietkau <nbd@nbd.name>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WZRHPAG300H_MAC_OFFSET 0x20c
-#define WZRHPAG300H_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPAG300H_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wzrhpag300h_flash_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x0040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x0040000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "art",
- .offset = 0x0050000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0060000,
- .size = 0x1f90000,
- }, {
- .name = "user_property",
- .offset = 0x1ff0000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct flash_platform_data wzrhpag300h_flash_data = {
- .parts = wzrhpag300h_flash_partitions,
- .nr_parts = ARRAY_SIZE(wzrhpag300h_flash_partitions),
-};
-
-static struct gpio_led wzrhpag300h_leds_gpio[] __initdata = {
- {
- .name = "buffalo:red:diag",
- .gpio = 1,
- .active_low = 1,
- },
-};
-
-static struct gpio_led wzrhpag300h_wmac0_leds_gpio[] = {
- {
- .name = "buffalo:amber:band2g",
- .gpio = 1,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:usb",
- .gpio = 3,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:band2g",
- .gpio = 5,
- .active_low = 1,
- },
-};
-
-static struct gpio_led wzrhpag300h_wmac1_leds_gpio[] = {
- {
- .name = "buffalo:green:band5g",
- .gpio = 1,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:router",
- .gpio = 3,
- .active_low = 1,
- },
- {
- .name = "buffalo:blue:movie_engine",
- .gpio = 4,
- .active_low = 1,
- },
- {
- .name = "buffalo:amber:band5g",
- .gpio = 5,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button wzrhpag300h_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 11,
- .active_low = 1,
- }, {
- .desc = "usb",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 3,
- .active_low = 1,
- }, {
- .desc = "aoss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 5,
- .active_low = 1,
- }, {
- .desc = "router_auto",
- .type = EV_SW,
- .code = BTN_6,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 6,
- .active_low = 1,
- }, {
- .desc = "router_off",
- .type = EV_SW,
- .code = BTN_5,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 7,
- .active_low = 1,
- }, {
- .desc = "movie_engine",
- .type = EV_SW,
- .code = BTN_7,
- .debounce_interval = WZRHPAG300H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 8,
- .active_low = 1,
- }
-};
-
-static void __init wzrhpag300h_setup(void)
-{
- u8 *eeprom1 = (u8 *) KSEG1ADDR(0x1f051000);
- u8 *eeprom2 = (u8 *) KSEG1ADDR(0x1f055000);
- u8 *mac1 = eeprom1 + WZRHPAG300H_MAC_OFFSET;
- u8 *mac2 = eeprom2 + WZRHPAG300H_MAC_OFFSET;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 1);
-
- ath79_register_mdio(0, ~(BIT(0) | BIT(4)));
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = BIT(4);
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- gpio_request_one(2, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpag300h_leds_gpio),
- wzrhpag300h_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WZRHPAG300H_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wzrhpag300h_gpio_keys),
- wzrhpag300h_gpio_keys);
-
- ath79_register_m25p80_multi(&wzrhpag300h_flash_data);
-
- ap94_pci_init(eeprom1, mac1, eeprom2, mac2);
-
- ap9x_pci_setup_wmac_leds(0, wzrhpag300h_wmac0_leds_gpio,
- ARRAY_SIZE(wzrhpag300h_wmac0_leds_gpio));
- ap9x_pci_setup_wmac_leds(1, wzrhpag300h_wmac1_leds_gpio,
- ARRAY_SIZE(wzrhpag300h_wmac1_leds_gpio));
-}
-
-MIPS_MACHINE(ATH79_MACH_WZR_HP_AG300H, "WZR-HP-AG300H",
- "Buffalo WZR-HP-AG300H/WZR-600DHP", wzrhpag300h_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh.c
deleted file mode 100644
index 0a3eba9f77..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * Buffalo WZR-HP-G300NH board support
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/nxp_74hc153.h>
-#include <linux/rtl8366.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define WZRHPG300NH_GPIO_LED_USB 0
-#define WZRHPG300NH_GPIO_LED_DIAG 1
-#define WZRHPG300NH_GPIO_LED_WIRELESS 6
-#define WZRHPG300NH_GPIO_LED_SECURITY 17
-#define WZRHPG300NH_GPIO_LED_ROUTER 18
-
-#define WZRHPG300NH_GPIO_RTL8366_SDA 19
-#define WZRHPG300NH_GPIO_RTL8366_SCK 20
-
-#define WZRHPG300NH_GPIO_74HC153_S0 9
-#define WZRHPG300NH_GPIO_74HC153_S1 11
-#define WZRHPG300NH_GPIO_74HC153_1Y 12
-#define WZRHPG300NH_GPIO_74HC153_2Y 14
-
-#define WZRHPG300NH_GPIO_EXP_BASE 32
-#define WZRHPG300NH_GPIO_BTN_AOSS (WZRHPG300NH_GPIO_EXP_BASE + 0)
-#define WZRHPG300NH_GPIO_BTN_RESET (WZRHPG300NH_GPIO_EXP_BASE + 1)
-#define WZRHPG300NH_GPIO_BTN_ROUTER_ON (WZRHPG300NH_GPIO_EXP_BASE + 2)
-#define WZRHPG300NH_GPIO_BTN_QOS_ON (WZRHPG300NH_GPIO_EXP_BASE + 3)
-#define WZRHPG300NH_GPIO_BTN_USB (WZRHPG300NH_GPIO_EXP_BASE + 5)
-#define WZRHPG300NH_GPIO_BTN_ROUTER_AUTO (WZRHPG300NH_GPIO_EXP_BASE + 6)
-#define WZRHPG300NH_GPIO_BTN_QOS_OFF (WZRHPG300NH_GPIO_EXP_BASE + 7)
-
-#define WZRHPG300NH_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH_KEYS_POLL_INTERVAL)
-
-#define WZRHPG300NH_MAC_OFFSET 0x20c
-
-static struct mtd_partition wzrhpg300nh_flash_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x0040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x0040000,
- .size = 0x0020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0060000,
- .size = 0x1f60000,
- }, {
- .name = "user_property",
- .offset = 0x1fc0000,
- .size = 0x0020000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "art",
- .offset = 0x1fe0000,
- .size = 0x0020000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct physmap_flash_data wzrhpg300nh_flash_data = {
- .width = 2,
- .parts = wzrhpg300nh_flash_partitions,
- .nr_parts = ARRAY_SIZE(wzrhpg300nh_flash_partitions),
-};
-
-#define WZRHPG300NH_FLASH_BASE 0x1e000000
-#define WZRHPG300NH_FLASH_SIZE (32 * 1024 * 1024)
-
-static struct resource wzrhpg300nh_flash_resources[] = {
- [0] = {
- .start = WZRHPG300NH_FLASH_BASE,
- .end = WZRHPG300NH_FLASH_BASE + WZRHPG300NH_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device wzrhpg300nh_flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = wzrhpg300nh_flash_resources,
- .num_resources = ARRAY_SIZE(wzrhpg300nh_flash_resources),
- .dev = {
- .platform_data = &wzrhpg300nh_flash_data,
- }
-};
-
-static struct gpio_led wzrhpg300nh_leds_gpio[] __initdata = {
- {
- .name = "buffalo:orange:security",
- .gpio = WZRHPG300NH_GPIO_LED_SECURITY,
- .active_low = 1,
- }, {
- .name = "buffalo:green:wireless",
- .gpio = WZRHPG300NH_GPIO_LED_WIRELESS,
- .active_low = 1,
- }, {
- .name = "buffalo:green:router",
- .gpio = WZRHPG300NH_GPIO_LED_ROUTER,
- .active_low = 1,
- }, {
- .name = "buffalo:red:diag",
- .gpio = WZRHPG300NH_GPIO_LED_DIAG,
- .active_low = 1,
- }, {
- .name = "buffalo:blue:usb",
- .gpio = WZRHPG300NH_GPIO_LED_USB,
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_button wzrhpg300nh_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_RESET,
- .active_low = 1,
- }, {
- .desc = "aoss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_AOSS,
- .active_low = 1,
- }, {
- .desc = "usb",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_USB,
- .active_low = 1,
- }, {
- .desc = "qos_on",
- .type = EV_KEY,
- .code = BTN_3,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_QOS_ON,
- .active_low = 0,
- }, {
- .desc = "qos_off",
- .type = EV_KEY,
- .code = BTN_4,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_QOS_OFF,
- .active_low = 0,
- }, {
- .desc = "router_on",
- .type = EV_KEY,
- .code = BTN_5,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_ON,
- .active_low = 0,
- }, {
- .desc = "router_auto",
- .type = EV_KEY,
- .code = BTN_6,
- .debounce_interval = WZRHPG300NH_KEYS_DEBOUNCE_INTERVAL,
- .gpio = WZRHPG300NH_GPIO_BTN_ROUTER_AUTO,
- .active_low = 0,
- }
-};
-
-static struct nxp_74hc153_platform_data wzrhpg300nh_74hc153_data = {
- .gpio_base = WZRHPG300NH_GPIO_EXP_BASE,
- .gpio_pin_s0 = WZRHPG300NH_GPIO_74HC153_S0,
- .gpio_pin_s1 = WZRHPG300NH_GPIO_74HC153_S1,
- .gpio_pin_1y = WZRHPG300NH_GPIO_74HC153_1Y,
- .gpio_pin_2y = WZRHPG300NH_GPIO_74HC153_2Y,
-};
-
-static struct platform_device wzrhpg300nh_74hc153_device = {
- .name = NXP_74HC153_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &wzrhpg300nh_74hc153_data,
- }
-};
-
-static struct rtl8366_platform_data wzrhpg300nh_rtl8366_data = {
- .gpio_sda = WZRHPG300NH_GPIO_RTL8366_SDA,
- .gpio_sck = WZRHPG300NH_GPIO_RTL8366_SCK,
-};
-
-static struct platform_device wzrhpg300nh_rtl8366s_device = {
- .name = RTL8366S_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &wzrhpg300nh_rtl8366_data,
- }
-};
-
-static struct platform_device wzrhpg300nh_rtl8366rb_device = {
- .name = RTL8366RB_DRIVER_NAME,
- .id = -1,
- .dev = {
- .platform_data = &wzrhpg300nh_rtl8366_data,
- }
-};
-
-static void __init wzrhpg300nh_setup(void)
-{
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
- u8 *mac = eeprom + WZRHPG300NH_MAC_OFFSET;
- bool hasrtl8366rb = false;
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
- if (rtl8366_smi_detect(&wzrhpg300nh_rtl8366_data) == RTL8366_TYPE_RB)
- hasrtl8366rb = true;
-
- if (hasrtl8366rb) {
- ath79_eth0_pll_data.pll_1000 = 0x1f000000;
- ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
- ath79_eth1_pll_data.pll_1000 = 0x100;
- ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366rb_device.dev;
- } else {
- ath79_eth0_pll_data.pll_1000 = 0x1e000100;
- ath79_eth0_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
- ath79_eth1_pll_data.pll_1000 = 0x1e000100;
- ath79_eth1_data.mii_bus_dev = &wzrhpg300nh_rtl8366s_device.dev;
- }
-
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
-
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth1_data.phy_mask = 0x10;
-
- ath79_register_eth(0);
- ath79_register_eth(1);
-
- ath79_register_usb();
- ath79_register_wmac(eeprom, NULL);
-
- platform_device_register(&wzrhpg300nh_74hc153_device);
- platform_device_register(&wzrhpg300nh_flash_device);
-
- if (hasrtl8366rb)
- platform_device_register(&wzrhpg300nh_rtl8366rb_device);
- else
- platform_device_register(&wzrhpg300nh_rtl8366s_device);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh_leds_gpio),
- wzrhpg300nh_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WZRHPG300NH_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wzrhpg300nh_gpio_keys),
- wzrhpg300nh_gpio_keys);
-
-}
-
-MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH, "WZR-HP-G300NH",
- "Buffalo WZR-HP-G300NH", wzrhpg300nh_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c
deleted file mode 100644
index c44a9cf770..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g300nh2.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Buffalo WZR-HP-G300NH2 board support
- *
- * Copyright (C) 2011 Felix Fietkau <nbd@nbd.name>
- * Copyright (C) 2011 Mark Deneen <mdeneen@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-ap9x-pci.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WZRHPG300NH2_MAC_OFFSET 0x20c
-#define WZRHPG300NH2_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG300NH2_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wzrhpg300nh2_flash_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x0040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x0040000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "art",
- .offset = 0x0050000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0060000,
- .size = 0x1f90000,
- }, {
- .name = "user_property",
- .offset = 0x1ff0000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }
-};
-
-static struct flash_platform_data wzrhpg300nh2_flash_data = {
- .parts = wzrhpg300nh2_flash_partitions,
- .nr_parts = ARRAY_SIZE(wzrhpg300nh2_flash_partitions),
-};
-
-static struct gpio_led wzrhpg300nh2_leds_gpio[] __initdata = {
- {
- .name = "buffalo:red:diag",
- .gpio = 16,
- .active_low = 1,
- },
-};
-
-static struct gpio_led wzrhpg300nh2_wmac_leds_gpio[] = {
- {
- .name = "buffalo:blue:usb",
- .gpio = 4,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:wireless",
- .gpio = 5,
- .active_low = 1,
- },
- {
- .name = "buffalo:orange:security",
- .gpio = 6,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:router",
- .gpio = 7,
- .active_low = 1,
- },
- {
- .name = "buffalo:blue:movie_engine_on",
- .gpio = 8,
- .active_low = 1,
- },
- {
- .name = "buffalo:blue:movie_engine_off",
- .gpio = 9,
- .active_low = 1,
- },
-};
-
-/* The AOSS button is wmac gpio 12 */
-static struct gpio_keys_button wzrhpg300nh2_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 1,
- .active_low = 1,
- }, {
- .desc = "usb",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 7,
- .active_low = 1,
- }, {
- .desc = "qos",
- .type = EV_KEY,
- .code = BTN_3,
- .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 11,
- .active_low = 0,
- }, {
- .desc = "router_on",
- .type = EV_KEY,
- .code = BTN_5,
- .debounce_interval = WZRHPG300NH2_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 8,
- .active_low = 0,
- },
-};
-
-static void __init wzrhpg300nh2_setup(void)
-{
-
- u8 *eeprom = (u8 *) KSEG1ADDR(0x1f051000);
- u8 *mac0 = eeprom + WZRHPG300NH2_MAC_OFFSET;
- /* There is an eth1 but it is not connected to the switch */
-
- ath79_register_m25p80_multi(&wzrhpg300nh2_flash_data);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
- ath79_register_mdio(0, ~(BIT(0)));
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
-
- ath79_register_eth(0);
-
- /* gpio13 is usb power. Turn it on. */
- gpio_request_one(13, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg300nh2_leds_gpio),
- wzrhpg300nh2_leds_gpio);
- ath79_register_gpio_keys_polled(-1, WZRHPG300NH2_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wzrhpg300nh2_gpio_keys),
- wzrhpg300nh2_gpio_keys);
- ap9x_pci_setup_wmac_leds(0, wzrhpg300nh2_wmac_leds_gpio,
- ARRAY_SIZE(wzrhpg300nh2_wmac_leds_gpio));
-
- ap91_pci_init(eeprom, mac0);
-}
-
-MIPS_MACHINE(ATH79_MACH_WZR_HP_G300NH2, "WZR-HP-G300NH2",
- "Buffalo WZR-HP-G300NH2", wzrhpg300nh2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c
deleted file mode 100644
index 5d235c49f4..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-hp-g450h.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * Buffalo WZR-HP-G450G board support
- *
- * Copyright (C) 2011 Felix Fietkau <nbd@nbd.name>
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ath79/ath79.h>
-
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-usb.h"
-#include "machtypes.h"
-
-#define WZRHPG450H_KEYS_POLL_INTERVAL 20 /* msecs */
-#define WZRHPG450H_KEYS_DEBOUNCE_INTERVAL (3 * WZRHPG450H_KEYS_POLL_INTERVAL)
-
-static struct mtd_partition wzrhpg450h_partitions[] = {
- {
- .name = "u-boot",
- .offset = 0,
- .size = 0x0040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "u-boot-env",
- .offset = 0x0040000,
- .size = 0x0010000,
- }, {
- .name = "ART",
- .offset = 0x0050000,
- .size = 0x0010000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "firmware",
- .offset = 0x0060000,
- .size = 0x1f80000,
- }, {
- .name = "user_property",
- .offset = 0x1fe0000,
- .size = 0x0020000,
- }
-};
-
-static struct flash_platform_data wzrhpg450h_flash_data = {
- .parts = wzrhpg450h_partitions,
- .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions),
-};
-
-static struct gpio_led wzrhpg450h_leds_gpio[] __initdata = {
- {
- .name = "buffalo:red:diag",
- .gpio = 14,
- .active_low = 1,
- },
- {
- .name = "buffalo:orange:security",
- .gpio = 13,
- .active_low = 1,
- },
-};
-
-
-static struct gpio_led wzrhpg450h_wmac_leds_gpio[] = {
- {
- .name = "buffalo:blue:movie_engine",
- .gpio = 13,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:router",
- .gpio = 14,
- .active_low = 1,
- },
- {
- .name = "buffalo:green:wireless",
- .gpio = 15,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button wzrhpg450h_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 6,
- .active_low = 1,
- }, {
- .desc = "usb",
- .type = EV_KEY,
- .code = BTN_2,
- .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 1,
- .active_low = 1,
- }, {
- .desc = "aoss",
- .type = EV_KEY,
- .code = KEY_WPS_BUTTON,
- .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 8,
- .active_low = 1,
- }, {
- .desc = "movie_engine",
- .type = EV_KEY,
- .code = BTN_6,
- .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 7,
- .active_low = 0,
- }, {
- .desc = "router_off",
- .type = EV_KEY,
- .code = BTN_5,
- .debounce_interval = WZRHPG450H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = 12,
- .active_low = 0,
- }
-};
-
-
-static void __init wzrhpg450h_init(void)
-{
- u8 *ee = (u8 *) KSEG1ADDR(0x1f051000);
- u8 *mac = (u8 *) ee + 2;
-
- ath79_register_m25p80_multi(&wzrhpg450h_flash_data);
-
- ath79_register_mdio(0, ~BIT(0));
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.speed = SPEED_1000;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_mask = BIT(0);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(wzrhpg450h_leds_gpio),
- wzrhpg450h_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, WZRHPG450H_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(wzrhpg450h_gpio_keys),
- wzrhpg450h_gpio_keys);
-
- ath79_register_eth(0);
-
- gpio_request_one(16, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
- "USB power");
- ath79_register_usb();
-
- ap91_pci_init(ee, NULL);
- ap9x_pci_get_wmac_data(0)->tx_gain_buffalo = true;
- ap9x_pci_get_wmac_data(1)->tx_gain_buffalo = true;
- ap9x_pci_setup_wmac_leds(0, wzrhpg450h_wmac_leds_gpio,
- ARRAY_SIZE(wzrhpg450h_wmac_leds_gpio));
-}
-
-MIPS_MACHINE(ATH79_MACH_WZR_HP_G450H, "WZR-HP-G450H", "Buffalo WZR-HP-G450H",
- wzrhpg450h_init);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-z1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-z1.c
deleted file mode 100644
index 912e9b2a6f..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-z1.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * Cisco Meraki Z1 board support
- *
- * Copyright (C) 2016 Chris Blake <chrisrblake93@gmail.com>
- * Copyright (C) 2016 Christian Lamparter <chunkeey@googlemail.com>
- *
- * Based on Cisco Meraki GPL Release r23-20150601 Z1 Device Config
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-#include <linux/ar8216_platform.h>
-#include <linux/platform/ar934x_nfc.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include <linux/leds-nu801.h>
-#include <linux/firmware.h>
-#include <linux/pci.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-nfc.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "dev-ap9x-pci.h"
-#include "machtypes.h"
-
-#define Z1_GPIO_LED_POWER_ORANGE 17
-
-#define Z1_GPIO_NU801_CKI 14
-#define Z1_GPIO_NU801_SDI 15
-
-#define Z1_GPIO_XLNA0 18
-#define Z1_GPIO_XLNA1 19
-
-#define Z1_GPIO_BTN_RESET 12
-#define Z1_KEYS_POLL_INTERVAL 20 /* msecs */
-#define Z1_KEYS_DEBOUNCE_INTERVAL (3 * Z1_KEYS_POLL_INTERVAL)
-
-#define Z1_ETH_SWITCH_PHY 0
-
-static struct gpio_led Z1_leds_gpio[] __initdata = {
- {
- .name = "z1:orange:power",
- .gpio = Z1_GPIO_LED_POWER_ORANGE,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button Z1_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = Z1_KEYS_DEBOUNCE_INTERVAL,
- .gpio = Z1_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static struct led_nu801_template tricolor_led_template = {
- .device_name = "z1",
- .name = "tricolor",
- .num_leds = 1,
- .cki = Z1_GPIO_NU801_CKI,
- .sdi = Z1_GPIO_NU801_SDI,
- .lei = -1,
- .ndelay = 500,
- .init_brightness = {
- LED_OFF,
- LED_OFF,
- LED_OFF,
- },
- .default_trigger = "none",
-};
-
-static struct led_nu801_platform_data tricolor_led_data = {
- .num_controllers = 1,
- .template = &tricolor_led_template,
-};
-
-static struct platform_device tricolor_leds = {
- .name = "leds-nu801",
- .id = -1,
- .dev.platform_data = &tricolor_led_data,
-};
-
-static struct ar8327_pad_cfg z1_ar8327_pad0_cfg = {
- .mode = AR8327_PAD_MAC_RGMII,
- .txclk_delay_en = true,
- .rxclk_delay_en = true,
- .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
- .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
-};
-
-static struct ar8327_platform_data z1_ar8327_data = {
- .pad0_cfg = &z1_ar8327_pad0_cfg,
- .port0_cfg = {
- .force_link = 1,
- .speed = AR8327_PORT_SPEED_1000,
- .duplex = 1,
- .txpause = 1,
- .rxpause = 1,
- },
-};
-
-static struct mdio_board_info z1_mdio0_info[] = {
- {
- .bus_id = "ag71xx-mdio.0",
- .mdio_addr = Z1_ETH_SWITCH_PHY,
- .platform_data = &z1_ar8327_data,
- },
-};
-
-static void __init z1_setup(void)
-{
- /* NAND */
- ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_SOFT_BCH);
- ath79_register_nfc();
-
- /* Eth Config */
- ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
- AR934X_ETH_CFG_SW_ONLY_MODE);
-
- /* MDIO Interface */
- ath79_register_mdio(1, 0x0);
- ath79_register_mdio(0, 0x0);
- mdiobus_register_board_info(z1_mdio0_info,
- ARRAY_SIZE(z1_mdio0_info));
-
- /* GMAC0 is connected to an AR8327 switch */
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
- ath79_eth0_data.phy_mask = BIT(Z1_ETH_SWITCH_PHY);
- ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
- ath79_eth0_pll_data.pll_1000 = 0x06000000;
- ath79_register_eth(0);
-
- /* XLNA */
- ath79_wmac_set_ext_lna_gpio(0, Z1_GPIO_XLNA0);
- ath79_wmac_set_ext_lna_gpio(1, Z1_GPIO_XLNA1);
-
- /* LEDs and Buttons */
- platform_device_register(&tricolor_leds);
- ath79_register_leds_gpio(-1, ARRAY_SIZE(Z1_leds_gpio),
- Z1_leds_gpio);
- ath79_register_gpio_keys_polled(-1, Z1_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(Z1_gpio_keys),
- Z1_gpio_keys);
-
- /* USB */
- ath79_register_usb();
-
- /* Wireless */
- ath79_register_wmac_simple();
- ap91_pci_init_simple();
-}
-MIPS_MACHINE(ATH79_MACH_Z1, "Z1", "Meraki Z1", z1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-zbt-we1526.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-zbt-we1526.c
deleted file mode 100644
index 42bad11905..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-zbt-we1526.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Zbtlink ZBT-WE1526 board support
- *
- * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
- *
- * Based on mach-dr531.c and mach-tl-wr841n-v9.c
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "dev-m25p80.h"
-#include "dev-usb.h"
-#include "dev-wmac.h"
-#include "machtypes.h"
-
-#define ZBT_WE1526_GPIO_LED_STATUS 13
-#define ZBT_WE1526_GPIO_LED_LAN1 16
-#define ZBT_WE1526_GPIO_LED_LAN2 15
-#define ZBT_WE1526_GPIO_LED_LAN3 14
-#define ZBT_WE1526_GPIO_LED_LAN4 11
-#define ZBT_WE1526_GPIO_LED_WAN 4
-#define ZBT_WE1526_GPIO_LED_WLAN 12
-
-#define ZBT_WE1526_GPIO_BTN_RESET 17
-
-#define ZBT_WE1526_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ZBT_WE1526_KEYS_DEBOUNCE_INTERVAL \
- (3 * ZBT_WE1526_KEYS_POLL_INTERVAL)
-
-#define ZBT_WE1526_MAC0_OFFSET 0x0
-#define ZBT_WE1526_MAC1_OFFSET 0x6
-#define ZBT_WE1526_WMAC_CALDATA_OFFSET 0x1000
-
-static struct gpio_led zbt_we1526_leds_gpio[] __initdata = {
- {
- .name = "zbt-we1526:green:status",
- .gpio = ZBT_WE1526_GPIO_LED_STATUS,
- .active_low = 1,
- },
- {
- .name = "zbt-we1526:green:lan1",
- .gpio = ZBT_WE1526_GPIO_LED_LAN1,
- .active_low = 1,
- },
- {
- .name = "zbt-we1526:green:lan2",
- .gpio = ZBT_WE1526_GPIO_LED_LAN2,
- .active_low = 1,
- },
- {
- .name = "zbt-we1526:green:lan3",
- .gpio = ZBT_WE1526_GPIO_LED_LAN3,
- .active_low = 1,
- },
- {
- .name = "zbt-we1526:green:lan4",
- .gpio = ZBT_WE1526_GPIO_LED_LAN4,
- .active_low = 1,
- },
- {
- .name = "zbt-we1526:green:wan",
- .gpio = ZBT_WE1526_GPIO_LED_WAN,
- .active_low = 1,
- },
- {
- .name = "zbt-we1526:green:wlan",
- .gpio = ZBT_WE1526_GPIO_LED_WLAN,
- .active_low = 1,
- },
-};
-
-static struct gpio_keys_button zbt_we1526_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ZBT_WE1526_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ZBT_WE1526_GPIO_BTN_RESET,
- .active_low = 1,
- },
-};
-
-static void __init zbt_we1526_gpio_setup(void)
-{
- /* For LED on GPIO4 */
- ath79_gpio_function_disable(AR934X_GPIO_FUNC_CLK_OBS4_EN);
- ath79_gpio_output_select(ZBT_WE1526_GPIO_LED_WAN, 0);
-
- ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_STATUS, true);
- ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_LAN1, true);
- ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_LAN2, true);
- ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_LAN3, true);
- ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_LAN4, true);
- ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_WAN, true);
- ath79_gpio_direction_select(ZBT_WE1526_GPIO_LED_WLAN, true);
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(zbt_we1526_leds_gpio),
- zbt_we1526_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ZBT_WE1526_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(zbt_we1526_gpio_keys),
- zbt_we1526_gpio_keys);
-}
-
-static void __init zbt_we1526_setup(void)
-{
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
- ath79_register_m25p80(NULL);
-
- zbt_we1526_gpio_setup();
-
- ath79_setup_ar933x_phy4_switch(false, false);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN */
- ath79_eth1_data.duplex = DUPLEX_FULL;
- ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
- ath79_switch_data.phy_poll_mask |= BIT(4);
- ath79_init_mac(ath79_eth1_data.mac_addr,
- art + ZBT_WE1526_MAC0_OFFSET, 0);
- ath79_register_eth(1);
-
- /* WAN */
- ath79_switch_data.phy4_mii_en = 1;
- ath79_eth0_data.duplex = DUPLEX_FULL;
- ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
- ath79_eth0_data.phy_mask = BIT(4);
- ath79_eth0_data.speed = SPEED_100;
- ath79_init_mac(ath79_eth0_data.mac_addr,
- art + ZBT_WE1526_MAC1_OFFSET, 0);
- ath79_register_eth(0);
-
- ath79_register_wmac(art + ZBT_WE1526_WMAC_CALDATA_OFFSET, NULL);
-
- ath79_register_usb();
-}
-
-MIPS_MACHINE(ATH79_MACH_ZBT_WE1526, "ZBT-WE1526", "Zbtlink ZBT-WE1526",
- zbt_we1526_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c
deleted file mode 100644
index bc79ab9953..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Zcomax ZCN-1523H-2-8/5-16 board support
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ar71xx_regs.h>
-
-#include "common.h"
-#include "dev-eth.h"
-#include "dev-m25p80.h"
-#include "dev-ap9x-pci.h"
-#include "dev-gpio-buttons.h"
-#include "dev-leds-gpio.h"
-#include "machtypes.h"
-
-#define ZCN_1523H_GPIO_BTN_RESET 0
-#define ZCN_1523H_GPIO_LED_INIT 11
-#define ZCN_1523H_GPIO_LED_LAN1 17
-
-#define ZCN_1523H_2_GPIO_LED_WEAK 13
-#define ZCN_1523H_2_GPIO_LED_MEDIUM 14
-#define ZCN_1523H_2_GPIO_LED_STRONG 15
-
-#define ZCN_1523H_5_GPIO_LAN2_POWER 1
-#define ZCN_1523H_5_GPIO_LED_LAN2 13
-#define ZCN_1523H_5_GPIO_LED_WEAK 14
-#define ZCN_1523H_5_GPIO_LED_MEDIUM 15
-#define ZCN_1523H_5_GPIO_LED_STRONG 16
-
-#define ZCN_1523H_KEYS_POLL_INTERVAL 20 /* msecs */
-#define ZCN_1523H_KEYS_DEBOUNCE_INTERVAL (3 * ZCN_1523H_KEYS_POLL_INTERVAL)
-
-static struct gpio_keys_button zcn_1523h_gpio_keys[] __initdata = {
- {
- .desc = "reset",
- .type = EV_KEY,
- .code = KEY_RESTART,
- .debounce_interval = ZCN_1523H_KEYS_DEBOUNCE_INTERVAL,
- .gpio = ZCN_1523H_GPIO_BTN_RESET,
- .active_low = 1,
- }
-};
-
-static struct gpio_led zcn_1523h_leds_gpio[] __initdata = {
- {
- .name = "zcn-1523h:amber:init",
- .gpio = ZCN_1523H_GPIO_LED_INIT,
- .active_low = 1,
- }, {
- .name = "zcn-1523h:green:lan1",
- .gpio = ZCN_1523H_GPIO_LED_LAN1,
- .active_low = 1,
- }
-};
-
-static struct gpio_led zcn_1523h_2_leds_gpio[] __initdata = {
- {
- .name = "zcn-1523h:red:weak",
- .gpio = ZCN_1523H_2_GPIO_LED_WEAK,
- .active_low = 1,
- }, {
- .name = "zcn-1523h:amber:medium",
- .gpio = ZCN_1523H_2_GPIO_LED_MEDIUM,
- .active_low = 1,
- }, {
- .name = "zcn-1523h:green:strong",
- .gpio = ZCN_1523H_2_GPIO_LED_STRONG,
- .active_low = 1,
- }
-};
-
-static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = {
- {
- .name = "zcn-1523h:red:weak",
- .gpio = ZCN_1523H_5_GPIO_LED_WEAK,
- .active_low = 1,
- }, {
- .name = "zcn-1523h:amber:medium",
- .gpio = ZCN_1523H_5_GPIO_LED_MEDIUM,
- .active_low = 1,
- }, {
- .name = "zcn-1523h:green:strong",
- .gpio = ZCN_1523H_5_GPIO_LED_STRONG,
- .active_low = 1,
- }, {
- .name = "zcn-1523h:green:lan2",
- .gpio = ZCN_1523H_5_GPIO_LED_LAN2,
- .active_low = 1,
- }
-};
-
-static void __init zcn_1523h_generic_setup(void)
-{
- u8 *mac = (u8 *) KSEG1ADDR(0x1f7e0004);
- u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
-
- ath79_gpio_function_disable(AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
- AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
-
- ath79_register_m25p80(NULL);
-
- ath79_register_leds_gpio(0, ARRAY_SIZE(zcn_1523h_leds_gpio),
- zcn_1523h_leds_gpio);
-
- ath79_register_gpio_keys_polled(-1, ZCN_1523H_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(zcn_1523h_gpio_keys),
- zcn_1523h_gpio_keys);
-
- ap91_pci_init(ee, mac);
-
- ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
- ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
-
- ath79_register_mdio(0, 0x0);
-
- /* LAN1 port */
- ath79_register_eth(0);
-}
-
-static void __init zcn_1523h_2_setup(void)
-{
- zcn_1523h_generic_setup();
- ap9x_pci_setup_wmac_gpio(0, BIT(9), 0);
-
- ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_2_leds_gpio),
- zcn_1523h_2_leds_gpio);
-}
-
-MIPS_MACHINE(ATH79_MACH_ZCN_1523H_2, "ZCN-1523H-2", "Zcomax ZCN-1523H-2",
- zcn_1523h_2_setup);
-
-static void __init zcn_1523h_5_setup(void)
-{
- zcn_1523h_generic_setup();
- ap9x_pci_setup_wmac_gpio(0, BIT(8), 0);
-
- ath79_register_leds_gpio(1, ARRAY_SIZE(zcn_1523h_5_leds_gpio),
- zcn_1523h_5_leds_gpio);
-
- /* LAN2 port */
- ath79_register_eth(1);
-}
-
-MIPS_MACHINE(ATH79_MACH_ZCN_1523H_5, "ZCN-1523H-5", "Zcomax ZCN-1523H-5",
- zcn_1523h_5_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
deleted file mode 100644
index 900b4ec87b..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * Atheros AR71XX/AR724X/AR913X machine type definitions
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_MACHTYPE_H
-#define _ATH79_MACHTYPE_H
-
-#include <asm/mips_machine.h>
-
-enum ath79_mach_type {
- ATH79_MACH_GENERIC_OF = -1, /* Device tree board */
- ATH79_MACH_GENERIC = 0,
- ATH79_MACH_A40, /* OpenMesh A40 */
- ATH79_MACH_A60, /* OpenMesh A60 */
- ATH79_MACH_WI2A_AC200I, /* Nokia WI2A-AC200i */
- ATH79_MACH_ALFA_AP120C, /* ALFA Network AP120C board */
- ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */
- ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */
- ATH79_MACH_ALL0258N, /* Allnet ALL0258N */
- ATH79_MACH_ALL0305, /* Allnet ALL0305 */
- ATH79_MACH_ALL0315N, /* Allnet ALL0315N */
- ATH79_MACH_ANTMINER_S1, /* Antminer S1 */
- ATH79_MACH_ANTMINER_S3, /* Antminer S3 */
- ATH79_MACH_ANTROUTER_R1, /* Antrouter R1 */
- ATH79_MACH_AP121, /* Atheros AP121 reference board */
- ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
- ATH79_MACH_AP121F, /* ALFA Network AP121F */
- ATH79_MACH_AP132, /* Atheros AP132 reference board */
- ATH79_MACH_AP135_020, /* Atheros AP135-020 reference board */
- ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
- ATH79_MACH_AP136_020, /* Atheros AP136-020 reference board */
- ATH79_MACH_AP143, /* Atheros AP143 reference board */
- ATH79_MACH_AP147_010, /* Atheros AP147-010 reference board */
- ATH79_MACH_AP152, /* Atheros AP152 reference board */
- ATH79_MACH_AP531B0, /* Rockeetech AP531B0 */
- ATH79_MACH_AP90Q, /* YunCore AP80Q/AP90Q */
- ATH79_MACH_AP91_5G, /* ALFA Network AP91-5G */
- ATH79_MACH_AP96, /* Atheros AP96 */
- ATH79_MACH_ARCHER_C25_V1, /* TP-LINK Archer C25 V1 board */
- ATH79_MACH_ARCHER_C5, /* TP-LINK Archer C5 board */
- ATH79_MACH_ARCHER_C58_V1, /* TP-LINK Archer C58 V1 board */
- ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
- ATH79_MACH_ARCHER_C59_V2, /* TP-LINK Archer C59 V2 board */
- ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
- ATH79_MACH_ARCHER_C60_V2, /* TP-LINK Archer C60 V2 board */
- ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
- ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
- ATH79_MACH_ARCHER_C7_V4, /* TP-LINK Archer C7 V4 board */
- ATH79_MACH_ARCHER_C7_V5, /* TP-LINK Archer C7 V5 board */
- ATH79_MACH_ARDUINO_YUN, /* Yun */
- ATH79_MACH_AW_NR580, /* AzureWave AW-NR580 */
- ATH79_MACH_BHR_4GRV2, /* Buffalo BHR-4GRV2 */
- ATH79_MACH_BHU_BXU2000N2_A1, /* BHU BXU2000n-2 A1 */
- ATH79_MACH_BSB, /* Smart Electronics Black Swift board */
- ATH79_MACH_C55, /* AirTight Networks C-55 */
- ATH79_MACH_C60, /* AirTight Networks C-60 */
- ATH79_MACH_CAP324, /* PowerCloud Systems CAP324 */
- ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */
- ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */
- ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */
- ATH79_MACH_CF_E320N_V2, /* COMFAST CF-E320N v2 */
- ATH79_MACH_CF_E355AC, /* COMFAST CF-E355AC */
- ATH79_MACH_CF_E355AC_V2, /* COMFAST CF-E355AC v2*/
- ATH79_MACH_CF_E375AC, /* COMFAST CF-E375AC */
- ATH79_MACH_CF_E380AC_V1, /* COMFAST CF-E380AC v1 */
- ATH79_MACH_CF_E380AC_V2, /* COMFAST CF-E380AC v2 */
- ATH79_MACH_CF_E385AC, /* COMFAST CF-E385AC */
- ATH79_MACH_CF_E520N, /* COMFAST CF-E520N */
- ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */
- ATH79_MACH_CPE210, /* TP-LINK CPE210 v1 */
- ATH79_MACH_CPE210_V2, /* TP-LINK CPE210 v2 */
- ATH79_MACH_CPE210_V3, /* TP-LINK CPE210 v3 */
- ATH79_MACH_CPE505N, /* P&W CPE505N */
- ATH79_MACH_CPE510, /* TP-LINK CPE510 */
- ATH79_MACH_CPE510_V2, /* TP-LINK CPE510 v2 */
- ATH79_MACH_CPE830, /* YunCore CPE830 */
- ATH79_MACH_CPE870, /* YunCore CPE870 */
- ATH79_MACH_CR3000, /* PowerCloud Systems CR3000 */
- ATH79_MACH_CR5000, /* PowerCloud Systems CR5000 */
- ATH79_MACH_DAP_1330_A1, /* D-Link DAP-1330 rev. A1 */
- ATH79_MACH_DAP_2695_A1, /* D-Link DAP-2695 rev. A1 */
- ATH79_MACH_DB120, /* Atheros DB120 reference board */
- ATH79_MACH_DGL_5500_A1, /* D-link DGL-5500 rev. A1 */
- ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */
- ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */
- ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */
- ATH79_MACH_DIR_615_C1, /* D-Link DIR-615 rev. C1 */
- ATH79_MACH_DIR_615_E1, /* D-Link DIR-615 rev. E1 */
- ATH79_MACH_DIR_615_E4, /* D-Link DIR-615 rev. E4 */
- ATH79_MACH_DIR_615_I1, /* D-Link DIR-615 rev. I1 */
- ATH79_MACH_DIR_825_B1, /* D-Link DIR-825 rev. B1 */
- ATH79_MACH_DIR_825_C1, /* D-Link DIR-825 rev. C1 */
- ATH79_MACH_DIR_835_A1, /* D-Link DIR-835 rev. A1 */
- ATH79_MACH_DIR_869_A1, /* D-Link DIR-869 rev. A1 */
- ATH79_MACH_DLAN_HOTSPOT, /* devolo dLAN Hotspot */
- ATH79_MACH_DLAN_PRO_1200_AC, /* devolo dLAN pro 1200+ WiFi ac*/
- ATH79_MACH_DLAN_PRO_500_WP, /* devolo dLAN pro 500 Wireless+ */
- ATH79_MACH_DOMYWIFI_DW33D, /* DomyWifi DW33D */
- ATH79_MACH_DR342, /* Wallys DR342 */
- ATH79_MACH_DR344, /* Wallys DR344 */
- ATH79_MACH_DR531, /* Wallys DR531 */
- ATH79_MACH_DRAGINO2, /* Dragino Version 2 */
- ATH79_MACH_E1700AC_V2, /* Qxwlan E1700AC v2 */
- ATH79_MACH_E558_V2, /* Qxwlan E558 v2 */
- ATH79_MACH_E600G_V2, /* Qxwlan E600G v2 */
- ATH79_MACH_E600GAC_V2, /* Qxwlan E600GAC v2 */
- ATH79_MACH_E750A_V4, /* Qxwlan E750A v4 */
- ATH79_MACH_E750G_V8, /* Qxwlan E750G v8 */
- ATH79_MACH_EAP120, /* TP-LINK EAP120 */
- ATH79_MACH_EAP300V2, /* EnGenius EAP300 v2 */
- ATH79_MACH_EAP7660D, /* Senao EAP7660D */
- ATH79_MACH_EBR_2310_C1, /* D-link EBR-2310 rev. C1 */
- ATH79_MACH_EL_M150, /* EasyLink EL-M150 */
- ATH79_MACH_EL_MINI, /* EasyLink EL-MINI */
- ATH79_MACH_ENS202EXT, /* EnGenius ENS202EXT */
- ATH79_MACH_EPG5000, /* EnGenius EPG5000 */
- ATH79_MACH_ESR1750, /* EnGenius ESR1750 */
- ATH79_MACH_ESR900, /* EnGenius ESR900 */
- ATH79_MACH_EW_BALIN, /* embedded wireless Balin Platform */
- ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
- ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
- ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
- ATH79_MACH_FRITZ300E, /* AVM FRITZ!WLAN Repeater 300E */
- ATH79_MACH_FRITZ4020, /* AVM FRITZ!Box 4020 */
- ATH79_MACH_FRITZ450E, /* AVM FRITZ!WLAN Repeater 450E */
- ATH79_MACH_GL_AR150, /* GL-AR150 support */
- ATH79_MACH_GL_AR300, /* GL-AR300 */
- ATH79_MACH_GL_AR300M, /* GL-AR300M */
- ATH79_MACH_GL_AR750, /* GL.iNet GL-AR750 */
- ATH79_MACH_GL_AR750S, /* GL.iNet GL-AR750S */
- ATH79_MACH_GL_DOMINO, /* Domino */
- ATH79_MACH_GL_INET, /* GL-CONNECT GL-INET */
- ATH79_MACH_GL_MIFI, /* GL-MIFI support */
- ATH79_MACH_GL_USB150, /* GL.iNet GL-USB150 */
- ATH79_MACH_GS_MINIBOX_V1, /* GainStrong MiniBox V1.0 */
- ATH79_MACH_GS_MINIBOX_V32, /* Gainstrong MiniBox V3.2 */
- ATH79_MACH_GS_OOLITE_V1, /* GainStrong Oolite V1.0 */
- ATH79_MACH_GS_OOLITE_V5_2, /* GainStrong Oolite V5.2 */
- ATH79_MACH_GS_OOLITE_V5_2_DEV, /* GainStrong Oolite V5.2-Dev */
- ATH79_MACH_HIVEAP_121, /* Aerohive HiveAP-121*/
- ATH79_MACH_HIWIFI_HC6361, /* HiWiFi HC6361 */
- ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
- ATH79_MACH_JA76PF, /* jjPlus JA76PF */
- ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
- ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
- ATH79_MACH_JWAP230, /* jjPlus JWAP230 */
- ATH79_MACH_KOALA, /* OCEDO Koala */
- ATH79_MACH_LAN_TURTLE, /* Hak5 LAN Turtle */
- ATH79_MACH_LIMA, /* 8devices Lima */
- ATH79_MACH_MC_MAC1200R, /* MERCURY MAC1200R */
- ATH79_MACH_MR12, /* Cisco Meraki MR12 */
- ATH79_MACH_MR16, /* Cisco Meraki MR16 */
- ATH79_MACH_MR1750, /* OpenMesh MR1750 */
- ATH79_MACH_MR1750V2, /* OpenMesh MR1750v2 */
- ATH79_MACH_MR18, /* Cisco Meraki MR18 */
- ATH79_MACH_MR600, /* OpenMesh MR600 */
- ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
- ATH79_MACH_MR900, /* OpenMesh MR900 */
- ATH79_MACH_MR900v2, /* OpenMesh MR900v2 */
- ATH79_MACH_MYNET_N600, /* WD My Net N600 */
- ATH79_MACH_MYNET_N750, /* WD My Net N750 */
- ATH79_MACH_MYNET_REXT, /* WD My Net Wi-Fi Range Extender */
- ATH79_MACH_MZK_W04NU, /* Planex MZK-W04NU */
- ATH79_MACH_MZK_W300NH, /* Planex MZK-W300NH */
- ATH79_MACH_N5Q, /* ALFA Network N5Q */
- ATH79_MACH_NBG460N, /* Zyxel NBG460N/550N/550NH */
- ATH79_MACH_NBG6616, /* Zyxel NBG6616 */
- ATH79_MACH_NBG6716, /* Zyxel NBG6716 */
- ATH79_MACH_OM2P, /* OpenMesh OM2P */
- ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */
- ATH79_MACH_OM2Pv4, /* OpenMesh OM2Pv4 */
- ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */
- ATH79_MACH_OM2P_HSv2, /* OpenMesh OM2P-HSv2 */
- ATH79_MACH_OM2P_HSv3, /* OpenMesh OM2P-HSv3 */
- ATH79_MACH_OM2P_HSv4, /* OpenMesh OM2P-HSv4 */
- ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */
- ATH79_MACH_OM5P, /* OpenMesh OM5P */
- ATH79_MACH_OM5P_AC, /* OpenMesh OM5P-AC */
- ATH79_MACH_OM5P_ACv2, /* OpenMesh OM5P-ACv2 */
- ATH79_MACH_OM5P_AN, /* OpenMesh OM5P-AN */
- ATH79_MACH_OMY_G1, /* OMYlink OMY-G1 */
- ATH79_MACH_OMY_X1, /* OMYlink OMY-X1 */
- ATH79_MACH_ONION_OMEGA, /* ONION OMEGA */
- ATH79_MACH_PACKET_SQUIRREL, /* Hak5 Packet Squirrel */
- ATH79_MACH_PB42, /* Atheros PB42 */
- ATH79_MACH_PB44, /* Atheros PB44 reference board */
- ATH79_MACH_PQI_AIR_PEN, /* PQI Air Pen */
- ATH79_MACH_QIHOO_C301, /* Qihoo 360 C301 */
- ATH79_MACH_R36A, /* ALFA Network R36A */
- ATH79_MACH_R602N, /* P&W R602N */
- ATH79_MACH_R6100, /* NETGEAR R6100 */
- ATH79_MACH_RAMBUTAN, /* 8devices Rambutan */
- ATH79_MACH_RB_2011G, /* Mikrotik RouterBOARD 2011UAS-2HnD */
- ATH79_MACH_RB_2011L, /* Mikrotik RouterBOARD 2011L */
- ATH79_MACH_RB_2011R5, /* Mikrotik RouterBOARD 2011UiAS(-2Hnd) */
- ATH79_MACH_RB_2011US, /* Mikrotik RouterBOARD 2011UAS */
- ATH79_MACH_RB_411, /* MikroTik RouterBOARD 411/411A/411AH */
- ATH79_MACH_RB_411U, /* MikroTik RouterBOARD 411U */
- ATH79_MACH_RB_433, /* MikroTik RouterBOARD 433/433AH */
- ATH79_MACH_RB_433U, /* MikroTik RouterBOARD 433UAH */
- ATH79_MACH_RB_435G, /* MikroTik RouterBOARD 435G */
- ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */
- ATH79_MACH_RB_450G, /* MikroTik RouterBOARD 450G */
- ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
- ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
- ATH79_MACH_RB_711GR100, /* Mikrotik RouterBOARD 911/912 boards */
- ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
- ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
- ATH79_MACH_RB_750UPR2, /* MikroTik RouterBOARD 750UP r2 */
- ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
- ATH79_MACH_RB_751G, /* Mikrotik RouterBOARD 751G */
- ATH79_MACH_RB_911L, /* Mikrotik RouterBOARD 911-2Hn/911-5Hn boards */
- ATH79_MACH_RB_922GS, /* Mikrotik RouterBOARD 911/922GS boards */
- ATH79_MACH_RB_931, /* MikroTik RouterBOARD 931-2nD */
- ATH79_MACH_RB_941, /* MikroTik RouterBOARD 941-2nD */
- ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
- ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
- ATH79_MACH_RB_952, /* MikroTik RouterBOARD 951Ui-2nD / 952Ui-5ac2nD */
- ATH79_MACH_RB_962, /* MikroTik RouterBOARD 962UiGS-5HacT2HnT */
- ATH79_MACH_RB_CAP, /* Mikrotik RouterBOARD cAP2nD */
- ATH79_MACH_RB_LHG5, /* Mikrotik RouterBOARD LHG5 */
- ATH79_MACH_RB_MAP, /* Mikrotik RouterBOARD mAP2nD */
- ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */
- ATH79_MACH_RB_WAP, /* Mikrotik RouterBOARD wAP2nD */
- ATH79_MACH_RB_WAPR, /* Mikrotik RouterBOARD wAPR2nD */
- ATH79_MACH_RB_WAPAC, /* Mikrotik RouterBOARD wAPG-5HacT2HnD */
- ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
- ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
- ATH79_MACH_RE355, /* TP-LINK RE355 */
- ATH79_MACH_RE450, /* TP-LINK RE450 */
- ATH79_MACH_RME_EG200, /* eTactica EG200 */
- ATH79_MACH_RUT9XX, /* Teltonika RUT900 series */
- ATH79_MACH_RW2458N, /* Redwave RW2458N */
- ATH79_MACH_SC1750, /* Abicom SC1750 */
- ATH79_MACH_SC300M, /* Abicom SC300M */
- ATH79_MACH_SC450, /* Abicom SC450 */
- ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */
- ATH79_MACH_SOM9331, /* OpenEmbed SOM9331 */
- ATH79_MACH_SR3200, /* YunCore SR3200 */
- ATH79_MACH_T830, /* YunCore T830 */
- ATH79_MACH_TELLSTICK_ZNET_LITE, /* TellStick ZNet Lite */
- ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
- ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
- ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
- ATH79_MACH_TEW_732BR, /* TRENDnet TEW-732BR */
- ATH79_MACH_TEW_823DRU, /* TRENDnet TEW-823DRU */
- ATH79_MACH_TL_MR10U, /* TP-LINK TL-MR10U */
- ATH79_MACH_TL_MR11U, /* TP-LINK TL-MR11U */
- ATH79_MACH_TL_MR13U, /* TP-LINK TL-MR13U */
- ATH79_MACH_TL_MR3020, /* TP-LINK TL-MR3020 */
- ATH79_MACH_TL_MR3040, /* TP-LINK TL-MR3040 */
- ATH79_MACH_TL_MR3040_V2, /* TP-LINK TL-MR3040 v2 */
- ATH79_MACH_TL_MR3220, /* TP-LINK TL-MR3220 */
- ATH79_MACH_TL_MR3220_V2, /* TP-LINK TL-MR3220 v2 */
- ATH79_MACH_TL_MR3420, /* TP-LINK TL-MR3420 */
- ATH79_MACH_TL_MR3420_V2, /* TP-LINK TL-MR3420 v2 */
- ATH79_MACH_TL_MR6400, /* TP-LINK TL-MR6400 */
- ATH79_MACH_TL_WA701ND_V2, /* TP-LINK TL-WA701ND v2 */
- ATH79_MACH_TL_WA7210N_V2, /* TP-LINK TL-WA7210N v2 */
- ATH79_MACH_TL_WA750RE, /* TP-LINK TL-WA750RE */
- ATH79_MACH_TL_WA7510N_V1, /* TP-LINK TL-WA7510N v1 */
- ATH79_MACH_TL_WA801ND_V2, /* TP-LINK TL-WA801ND v2 */
- ATH79_MACH_TL_WA801ND_V3, /* TP-LINK TL-WA801ND v3 */
- ATH79_MACH_TL_WA830RE_V2, /* TP-LINK TL-WA830RE v2 */
- ATH79_MACH_TL_WA850RE, /* TP-LINK TL-WA850RE */
- ATH79_MACH_TL_WA850RE_V2, /* TP-LINK TL-WA850RE v2 */
- ATH79_MACH_TL_WA855RE_V1, /* TP-LINK TL-WA855RE v1 */
- ATH79_MACH_TL_WA860RE, /* TP-LINK TL-WA860RE */
- ATH79_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */
- ATH79_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */
- ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */
- ATH79_MACH_TL_WA901ND_V4, /* TP-LINK TL-WA901ND v4 */
- ATH79_MACH_TL_WA901ND_V5, /* TP-LINK TL-WA901ND v5 */
- ATH79_MACH_TL_WDR3320_V2, /* TP-LINK TL-WDR3320 v2 */
- ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */
- ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
- ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */
- ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */
- ATH79_MACH_TL_WPA8630, /* TP-Link TL-WPA8630 */
- ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
- ATH79_MACH_TL_WR1043N_V5, /* TP-LINK TL-WR1043N v5 */
- ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
- ATH79_MACH_TL_WR1043ND_V2, /* TP-LINK TL-WR1043ND v2 */
- ATH79_MACH_TL_WR1043ND_V4, /* TP-LINK TL-WR1043ND v4 */
- ATH79_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */
- ATH79_MACH_TL_WR703N, /* TP-LINK TL-WR703N */
- ATH79_MACH_TL_WR710N, /* TP-LINK TL-WR710N */
- ATH79_MACH_TL_WR720N_V3, /* TP-LINK TL-WR720N v3/v4 */
- ATH79_MACH_TL_WR740N_V6, /* TP-LINK TL-WR740N/ND v6 */
- ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */
- ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4 */
- ATH79_MACH_TL_WR802N_V1, /* TP-LINK TL-WR802N v1 */
- ATH79_MACH_TL_WR802N_V2, /* TP-LINK TL-WR802N v2 */
- ATH79_MACH_TL_WR810N, /* TP-LINK TL-WR810N */
- ATH79_MACH_TL_WR810N_V2, /* TP-LINK TL-WR810N v2 */
- ATH79_MACH_TL_WR840N_V2, /* TP-LINK TL-WR840N v2 */
- ATH79_MACH_TL_WR840N_V3, /* TP-LINK TL-WR840N v3 */
- ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */
- ATH79_MACH_TL_WR841N_V11, /* TP-LINK TL-WR841N/ND v11 */
- ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */
- ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */
- ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */
- ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */
- ATH79_MACH_TL_WR842N_V3, /* TP-LINK TL-WR842N/ND v3 */
- ATH79_MACH_TL_WR902AC_V1, /* TP-LINK TL-WR902AC v1 */
- ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */
- ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */
- ATH79_MACH_TL_WR941ND_V6, /* TP-LINK TL-WR941ND v6 */
- ATH79_MACH_TL_WR940N_V4, /* TP-LINK TL-WR940N v4 */
- ATH79_MACH_TL_WR940N_V6, /* TP-LINK TL-WR940N v6 */
- ATH79_MACH_TL_WR942N_V1, /* TP-LINK TL-WR942N v1 */
- ATH79_MACH_TS_D084, /* PISEN TS-D084 */
- ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */
- ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */
- ATH79_MACH_UBNT_AIRGWP, /* Ubiquiti AirGateway Pro */
- ATH79_MACH_UBNT_AIRROUTER, /* Ubiquiti AirRouter */
- ATH79_MACH_UBNT_BULLET_M, /* Ubiquiti Bullet M */
- ATH79_MACH_UBNT_BULLET_M_XW, /* Ubiquiti Bullet M XW */
- ATH79_MACH_UBNT_LBE_M5, /* Ubiquiti Litebeam M5 */
- ATH79_MACH_UBNT_LOCO_M_XW, /* Ubiquiti Loco M XW */
- ATH79_MACH_UBNT_LSSR71, /* Ubiquiti LS-SR71 */
- ATH79_MACH_UBNT_LSX, /* Ubiquiti LSX */
- ATH79_MACH_UBNT_NANO_M, /* Ubiquiti NanoStation M */
- ATH79_MACH_UBNT_NANO_M_XW, /* Ubiquiti NanoStation M XW */
- ATH79_MACH_UBNT_ROCKET_M, /* Ubiquiti Rocket M */
- ATH79_MACH_UBNT_ROCKET_M_TI, /* Ubiquiti Rocket M TI */
- ATH79_MACH_UBNT_ROCKET_M_XW, /* Ubiquiti Rocket M XW */
- ATH79_MACH_UBNT_RS, /* Ubiquiti RouterStation */
- ATH79_MACH_UBNT_RSPRO, /* Ubiquiti RouterStation Pro */
- ATH79_MACH_UBNT_UAP_PRO, /* Ubiquiti UniFi AP Pro */
- ATH79_MACH_UBNT_UNIFI, /* Ubiquiti Unifi */
- ATH79_MACH_UBNT_UNIFIAC_LITE, /* Ubiquiti Unifi AC LITE/LR/MESH */
- ATH79_MACH_UBNT_UNIFIAC_PRO, /* Ubiquiti Unifi AC PRO/MESH PRO */
- ATH79_MACH_UBNT_UNIFI_OUTDOOR, /* Ubiquiti UnifiAP Outdoor */
- ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
- ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
- ATH79_MACH_WAM250, /* Samsung WAM250 */
- ATH79_MACH_WBS210, /* TP-LINK WBS210 */
- ATH79_MACH_WBS510, /* TP-LINK WBS510 */
- ATH79_MACH_WEIO, /* WeIO board */
- ATH79_MACH_WHR_G301N, /* Buffalo WHR-G301N */
- ATH79_MACH_WHR_HP_G300N, /* Buffalo WHR-HP-G300N */
- ATH79_MACH_WHR_HP_GN, /* Buffalo WHR-HP-GN */
- ATH79_MACH_WIFI_PINEAPPLE_NANO, /* Hak5 WiFi Pineapple NANO */
- ATH79_MACH_WLAE_AG300N, /* Buffalo WLAE-AG300N */
- ATH79_MACH_WLR8100, /* SITECOM WLR-8100 */
- ATH79_MACH_WNDAP360, /* NETGEAR WNDAP360 */
- ATH79_MACH_WNDR3700, /* NETGEAR WNDR3700/WNDR3800/WNDRMAC */
- ATH79_MACH_WNDR3700_V4, /* NETGEAR WNDR3700v4 */
- ATH79_MACH_WNDR4300, /* NETGEAR WNDR4300 */
- ATH79_MACH_WNR1000_V2, /* NETGEAR WNR1000 v2 */
- ATH79_MACH_WNR2000, /* NETGEAR WNR2000 */
- ATH79_MACH_WNR2000_V3, /* NETGEAR WNR2000 v3 */
- ATH79_MACH_WNR2000_V4, /* NETGEAR WNR2000 v4 */
- ATH79_MACH_WNR2200, /* NETGEAR WNR2200 */
- ATH79_MACH_WNR612_V2, /* NETGEAR WNR612 v2 */
- ATH79_MACH_WP543, /* Compex WP543 */
- ATH79_MACH_WPE72, /* Compex WPE72 */
- ATH79_MACH_WPJ342, /* Compex WPJ342 */
- ATH79_MACH_WPJ344, /* Compex WPJ344 */
- ATH79_MACH_WPJ531, /* Compex WPJ531 */
- ATH79_MACH_WPJ558, /* Compex WPJ558 */
- ATH79_MACH_WPJ563, /* Compex WPJ563 */
- ATH79_MACH_WPN824N, /* NETGEAR WPN824N */
- ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
- ATH79_MACH_WRT400N, /* Linksys WRT400N */
- ATH79_MACH_WRTNODE2Q, /* WRTnode2Q */
- ATH79_MACH_WZR_450HP2, /* Buffalo WZR-450HP2 */
- ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
- ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
- ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
- ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */
- ATH79_MACH_XD3200, /* YunCore XD3200 */
- ATH79_MACH_Z1, /* Cisco Meraki Z1 */
- ATH79_MACH_ZBT_WE1526, /* Zbtlink ZBT-WE1526 */
- ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */
- ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */
-};
-
-#endif /* _ATH79_MACHTYPE_H */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/nvram.c b/target/linux/ar71xx/files/arch/mips/ath79/nvram.c
deleted file mode 100644
index a1de55fb19..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/nvram.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Atheros AR71xx minimal nvram support
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/vmalloc.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/etherdevice.h>
-
-#include "nvram.h"
-
-char *ath79_nvram_find_var(const char *name, const char *buf, unsigned buf_len)
-{
- unsigned len = strlen(name);
- char *cur, *last;
-
- if (buf_len == 0 || len == 0)
- return NULL;
-
- if (buf_len < len)
- return NULL;
-
- if (len == 1)
- return memchr(buf, (int) *name, buf_len);
-
- last = (char *) buf + buf_len - len;
- for (cur = (char *) buf; cur <= last; cur++)
- if (cur[0] == name[0] && memcmp(cur, name, len) == 0)
- return cur + len;
-
- return NULL;
-}
-
-int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
- const char *name, char *mac)
-{
- char *buf;
- char *mac_str;
- int ret;
- int t;
-
- buf = vmalloc(nvram_len);
- if (!buf)
- return -ENOMEM;
-
- memcpy(buf, nvram, nvram_len);
- buf[nvram_len - 1] = '\0';
-
- mac_str = ath79_nvram_find_var(name, buf, nvram_len);
- if (!mac_str) {
- ret = -EINVAL;
- goto free;
- }
-
- if (strlen(mac_str) == 19 && mac_str[0] == '"' && mac_str[18] == '"') {
- mac_str[18] = 0;
- mac_str++;
- }
-
- t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
- &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
-
- if (t != ETH_ALEN)
- t = sscanf(mac_str, "%02hhx-%02hhx-%02hhx-%02hhx-%02hhx-%02hhx",
- &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
-
- if (t != ETH_ALEN) {
- ret = -EINVAL;
- goto free;
- }
-
- ret = 0;
-
-free:
- vfree(buf);
- return ret;
-}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/nvram.h b/target/linux/ar71xx/files/arch/mips/ath79/nvram.h
deleted file mode 100644
index 75151d4a3c..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/nvram.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Atheros AR71xx minimal nvram support
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_NVRAM_H
-#define _ATH79_NVRAM_H
-
-char *ath79_nvram_find_var(const char *name, const char *buf,
- unsigned buf_len);
-int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
- const char *name, char *mac);
-
-#endif /* _ATH79_NVRAM_H */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.c b/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.c
deleted file mode 100644
index 2202351806..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Atheros AP94 reference board PCI initialization
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-struct ath9k_fixup {
- u16 *cal_data;
- unsigned slot;
-};
-
-static int ath9k_num_fixups;
-static struct ath9k_fixup ath9k_fixups[2];
-
-static void ath9k_pci_fixup(struct pci_dev *dev)
-{
- void __iomem *mem;
- u16 *cal_data = NULL;
- u16 cmd;
- u32 bar0;
- u32 val;
- unsigned i;
-
- for (i = 0; i < ath9k_num_fixups; i++) {
- if (ath9k_fixups[i].cal_data == NULL)
- continue;
-
- if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
- continue;
-
- cal_data = ath9k_fixups[i].cal_data;
- break;
- }
-
- if (cal_data == NULL)
- return;
-
- if (*cal_data != 0xa55a) {
- pr_err("pci %s: invalid calibration data\n", pci_name(dev));
- return;
- }
-
- pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-
- mem = ioremap(AR71XX_PCI_MEM_BASE, 0x10000);
- if (!mem) {
- pr_err("pci %s: ioremap error\n", pci_name(dev));
- return;
- }
-
- pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-
- switch (ath79_soc) {
- case ATH79_SOC_AR7161:
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0,
- AR71XX_PCI_MEM_BASE);
- break;
- case ATH79_SOC_AR7240:
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0xffff);
- break;
-
- case ATH79_SOC_AR7241:
- case ATH79_SOC_AR7242:
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff);
- break;
- case ATH79_SOC_AR9344:
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0x1000ffff);
- break;
-
- default:
- BUG();
- }
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- /* set pointer to first reg address */
- cal_data += 3;
- while (*cal_data != 0xffff) {
- u32 reg;
- reg = *cal_data++;
- val = *cal_data++;
- val |= (*cal_data++) << 16;
-
- __raw_writel(val, mem + reg);
- udelay(100);
- }
-
- pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
- dev->vendor = val & 0xffff;
- dev->device = (val >> 16) & 0xffff;
-
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
- dev->revision = val & 0xff;
- dev->class = val >> 8; /* upper 3 bytes */
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
-
- pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-
- iounmap(mem);
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-
-void __init pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data)
-{
- if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
- return;
-
- ath9k_fixups[ath9k_num_fixups].slot = slot;
- ath9k_fixups[ath9k_num_fixups].cal_data = cal_data;
- ath9k_num_fixups++;
-}
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.h b/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.h
deleted file mode 100644
index 5794941f08..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/pci-ath9k-fixup.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _PCI_ATH9K_FIXUP
-#define _PCI_ATH9K_FIXUP
-
-void pci_enable_ath9k_fixup(unsigned slot, u16 *cal_data) __init;
-
-#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.c b/target/linux/ar71xx/files/arch/mips/ath79/routerboot.c
deleted file mode 100644
index 4c0cd1314a..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*
- * RouterBoot helper routines
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#define pr_fmt(fmt) "rb: " fmt
-
-#include <linux/kernel.h>
-#include <linux/kobject.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/routerboot.h>
-#include <linux/rle.h>
-#include <linux/lzo.h>
-
-#include "routerboot.h"
-
-#define RB_BLOCK_SIZE 0x1000
-#define RB_ART_SIZE 0x10000
-#define RB_MAGIC_ERD 0x00455244 /* extended radio data */
-
-static struct rb_info rb_info;
-
-static u32 get_u32(void *buf)
-{
- u8 *p = buf;
-
- return ((u32) p[3] + ((u32) p[2] << 8) + ((u32) p[1] << 16) +
- ((u32) p[0] << 24));
-}
-
-static u16 get_u16(void *buf)
-{
- u8 *p = buf;
-
- return (u16) p[1] + ((u16) p[0] << 8);
-}
-
-__init int
-routerboot_find_magic(u8 *buf, unsigned int buflen, u32 *offset, bool hard)
-{
- u32 magic_ref = hard ? RB_MAGIC_HARD : RB_MAGIC_SOFT;
- u32 magic;
- u32 cur = *offset;
-
- while (cur < buflen) {
- magic = get_u32(buf + cur);
- if (magic == magic_ref) {
- *offset = cur;
- return 0;
- }
-
- cur += 0x1000;
- }
-
- return -ENOENT;
-}
-
-__init int
-routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id,
- u8 **tag_data, u16 *tag_len)
-{
- uint32_t magic;
- bool align = false;
- int ret;
-
- if (buflen < 4)
- return -EINVAL;
-
- magic = get_u32(buf);
- switch (magic) {
- case RB_MAGIC_ERD:
- align = true;
- /* fall trough */
- case RB_MAGIC_HARD:
- /* skip magic value */
- buf += 4;
- buflen -= 4;
- break;
-
- case RB_MAGIC_SOFT:
- if (buflen < 8)
- return -EINVAL;
-
- /* skip magic and CRC value */
- buf += 8;
- buflen -= 8;
-
- break;
-
- default:
- return -EINVAL;
- }
-
- ret = -ENOENT;
- while (buflen > 2) {
- u16 id;
- u16 len;
-
- len = get_u16(buf);
- buf += 2;
- buflen -= 2;
-
- if (buflen < 2)
- break;
-
- id = get_u16(buf);
- buf += 2;
- buflen -= 2;
-
- if (id == RB_ID_TERMINATOR)
- break;
-
- if (buflen < len)
- break;
-
- if (id == tag_id) {
- if (tag_len)
- *tag_len = len;
- if (tag_data)
- *tag_data = buf;
- ret = 0;
- break;
- }
-
- if (align)
- len = (len + 3) / 4;
-
- buf += len;
- buflen -= len;
- }
-
- return ret;
-}
-
-static inline int
-rb_find_hard_cfg_tag(u16 tag_id, u8 **tag_data, u16 *tag_len)
-{
- if (!rb_info.hard_cfg_data ||
- !rb_info.hard_cfg_size)
- return -ENOENT;
-
- return routerboot_find_tag(rb_info.hard_cfg_data,
- rb_info.hard_cfg_size,
- tag_id, tag_data, tag_len);
-}
-
-__init const char *
-rb_get_board_name(void)
-{
- u16 tag_len;
- u8 *tag;
- int err;
-
- err = rb_find_hard_cfg_tag(RB_ID_BOARD_NAME, &tag, &tag_len);
- if (err)
- return NULL;
-
- return tag;
-}
-
-__init u32
-rb_get_hw_options(void)
-{
- u16 tag_len;
- u8 *tag;
- int err;
-
- err = rb_find_hard_cfg_tag(RB_ID_HW_OPTIONS, &tag, &tag_len);
- if (err)
- return 0;
-
- return get_u32(tag);
-}
-
-static void * __init
-__rb_get_wlan_data(u16 id)
-{
- u16 tag_len;
- u8 *tag;
- void *buf;
- int err;
- u32 magic;
- size_t src_done;
- size_t dst_done;
-
- err = rb_find_hard_cfg_tag(RB_ID_WLAN_DATA, &tag, &tag_len);
- if (err) {
- pr_err("no calibration data found\n");
- goto err;
- }
-
- buf = kmalloc(RB_ART_SIZE, GFP_KERNEL);
- if (buf == NULL) {
- pr_err("no memory for calibration data\n");
- goto err;
- }
-
- magic = get_u32(tag);
- if (magic == RB_MAGIC_ERD) {
- u8 *erd_data;
- u16 erd_len;
-
- err = routerboot_find_tag(tag, tag_len, 0x1,
- &erd_data, &erd_len);
- if (err) {
- pr_err("no ERD data found for id %u\n", id);
- goto err_free;
- }
-
- dst_done = RB_ART_SIZE;
- err = lzo1x_decompress_safe(erd_data, erd_len, buf, &dst_done);
- if (err) {
- pr_err("unable to decompress calibration data %d\n",
- err);
- goto err_free;
- }
- } else {
- err = rle_decode((char *) tag, tag_len, buf, RB_ART_SIZE,
- &src_done, &dst_done);
- if (err) {
- pr_err("unable to decode calibration data\n");
- goto err_free;
- }
- }
-
- return buf;
-
-err_free:
- kfree(buf);
-err:
- return NULL;
-}
-
-__init void *
-rb_get_wlan_data(void)
-{
- return __rb_get_wlan_data(0);
-}
-
-__init void *
-rb_get_ext_wlan_data(u16 id)
-{
- return __rb_get_wlan_data(id);
-}
-
-__init const struct rb_info *
-rb_init_info(void *data, unsigned int size)
-{
- unsigned int offset;
-
- if (size == 0 || (size % RB_BLOCK_SIZE) != 0)
- return NULL;
-
- for (offset = 0; offset < size; offset += RB_BLOCK_SIZE) {
- u32 magic;
-
- magic = get_u32(data + offset);
- switch (magic) {
- case RB_MAGIC_HARD:
- rb_info.hard_cfg_offs = offset;
- break;
-
- case RB_MAGIC_SOFT:
- rb_info.soft_cfg_offs = offset;
- break;
- }
- }
-
- if (!rb_info.hard_cfg_offs) {
- pr_err("could not find a valid RouterBOOT hard config\n");
- return NULL;
- }
-
- if (!rb_info.soft_cfg_offs) {
- pr_err("could not find a valid RouterBOOT soft config\n");
- return NULL;
- }
-
- rb_info.hard_cfg_size = RB_BLOCK_SIZE;
- rb_info.hard_cfg_data = kmemdup(data + rb_info.hard_cfg_offs,
- RB_BLOCK_SIZE, GFP_KERNEL);
- if (!rb_info.hard_cfg_data)
- return NULL;
-
- rb_info.board_name = rb_get_board_name();
- rb_info.hw_options = rb_get_hw_options();
-
- return &rb_info;
-}
-
-#if 0
-static char *rb_ext_wlan_data;
-
-static ssize_t
-rb_ext_wlan_data_read(struct file *filp, struct kobject *kobj,
- struct bin_attribute *attr, char *buf,
- loff_t off, size_t count)
-{
- if (off + count > attr->size)
- return -EFBIG;
-
- memcpy(buf, &rb_ext_wlan_data[off], count);
-
- return count;
-}
-
-static const struct bin_attribute rb_ext_wlan_data_attr = {
- .attr = {
- .name = "ext_wlan_data",
- .mode = S_IRUSR | S_IWUSR,
- },
- .read = rb_ext_wlan_data_read,
- .size = RB_ART_SIZE,
-};
-
-static int __init rb_sysfs_init(void)
-{
- struct kobject *rb_kobj;
- int ret;
-
- rb_ext_wlan_data = rb_get_ext_wlan_data(1);
- if (rb_ext_wlan_data == NULL)
- return -ENOENT;
-
- rb_kobj = kobject_create_and_add("routerboot", firmware_kobj);
- if (rb_kobj == NULL) {
- ret = -ENOMEM;
- pr_err("unable to create sysfs entry\n");
- goto err_free_wlan_data;
- }
-
- ret = sysfs_create_bin_file(rb_kobj, &rb_ext_wlan_data_attr);
- if (ret) {
- pr_err("unable to create sysfs file, %d\n", ret);
- goto err_put_kobj;
- }
-
- return 0;
-
-err_put_kobj:
- kobject_put(rb_kobj);
-err_free_wlan_data:
- kfree(rb_ext_wlan_data);
- return ret;
-}
-
-late_initcall(rb_sysfs_init);
-#endif
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.h b/target/linux/ar71xx/files/arch/mips/ath79/routerboot.h
deleted file mode 100644
index cf189362d6..0000000000
--- a/target/linux/ar71xx/files/arch/mips/ath79/routerboot.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * RouterBoot definitions
- *
- * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _ATH79_ROUTERBOOT_H_
-#define _ATH79_ROUTERBOOT_H_
-
-struct rb_info {
- unsigned int hard_cfg_offs;
- unsigned int hard_cfg_size;
- void *hard_cfg_data;
- unsigned int soft_cfg_offs;
-
- const char *board_name;
- u32 hw_options;
-};
-
-/* Bit definitions for hardware options */
-#define RB_HW_OPT_UART_ABSENT BIT(0)
-#define RB_HW_OPT_HAS_VOLTAGE BIT(1)
-#define RB_HW_OPT_HAS_USB BIT(2)
-#define RB_HW_OPT_HAS_ATTINY BIT(3)
-#define RB_HW_OPT_NO_NAND BIT(14)
-#define RB_HW_OPT_HAS_LCD BIT(15)
-#define RB_HW_OPT_HAS_POE_OUT BIT(16)
-#define RB_HW_OPT_HAS_uSD BIT(17)
-#define RB_HW_OPT_HAS_SFP BIT(20)
-#define RB_HW_OPT_HAS_WIFI BIT(21)
-#define RB_HW_OPT_HAS_TS_FOR_ADC BIT(22)
-#define RB_HW_OPT_HAS_PLC BIT(29)
-
-static inline bool
-rb_hw_option_match(const struct rb_info *info, u32 mask, u32 val)
-{
- return (info->hw_options & (val | mask)) == val;
-}
-
-static inline bool
-rb_has_hw_option(const struct rb_info *info, u32 mask)
-{
- return rb_hw_option_match(info, mask, mask);
-}
-
-#ifdef CONFIG_ATH79_ROUTERBOOT
-const struct rb_info *rb_init_info(void *data, unsigned int size);
-void *rb_get_wlan_data(void);
-void *rb_get_ext_wlan_data(u16 id);
-
-int routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id,
- u8 **tag_data, u16 *tag_len);
-int routerboot_find_magic(u8 *buf, unsigned int buflen, u32 *offset, bool hard);
-#else
-static inline const struct rb_info *
-rb_init_info(void *data, unsigned int size)
-{
- return NULL;
-}
-
-static inline void *rb_get_wlan_data(void)
-{
- return NULL;
-}
-
-static inline void *rb_get_wlan_data(u16 id)
-{
- return NULL;
-}
-
-static inline int
-routerboot_find_tag(u8 *buf, unsigned int buflen, u16 tag_id,
- u8 **tag_data, u16 *tag_len)
-{
- return -ENOENT;
-}
-
-static inline int
-routerboot_find_magic(u8 *buf, unsigned int buflen, u32 *offset, bool hard)
-{
- return -ENOENT;
-}
-#endif
-
-#endif /* _ATH79_ROUTERBOOT_H_ */
diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/fw/myloader/myloader.h b/target/linux/ar71xx/files/arch/mips/include/asm/fw/myloader/myloader.h
deleted file mode 100644
index 8a99d566d7..0000000000
--- a/target/linux/ar71xx/files/arch/mips/include/asm/fw/myloader/myloader.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Compex's MyLoader specific definitions
- *
- * Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _ASM_MIPS_FW_MYLOADER_H
-#define _ASM_MIPS_FW_MYLOADER_H
-
-#include <linux/myloader.h>
-
-struct myloader_info {
- uint32_t vid;
- uint32_t did;
- uint32_t svid;
- uint32_t sdid;
- uint8_t macs[MYLO_ETHADDR_COUNT][6];
-};
-
-#ifdef CONFIG_MYLOADER
-extern struct myloader_info *myloader_get_info(void) __init;
-#else
-static inline struct myloader_info *myloader_get_info(void)
-{
- return NULL;
-}
-#endif /* CONFIG_MYLOADER */
-
-#endif /* _ASM_MIPS_FW_MYLOADER_H */
diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
deleted file mode 100644
index e476d57e45..0000000000
--- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/ag71xx_platform.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Atheros AR71xx SoC specific platform data definitions
- *
- * Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_ATH79_PLATFORM_H
-#define __ASM_MACH_ATH79_PLATFORM_H
-
-#include <linux/if_ether.h>
-#include <linux/skbuff.h>
-#include <linux/phy.h>
-#include <linux/spi/spi.h>
-
-struct ag71xx_switch_platform_data {
- u8 phy4_mii_en:1;
- u8 phy_poll_mask;
-};
-
-struct ag71xx_platform_data {
- phy_interface_t phy_if_mode;
- u32 phy_mask;
- int speed;
- int duplex;
- u32 reset_bit;
- u8 mac_addr[ETH_ALEN];
- struct device *mii_bus_dev;
-
- u8 has_gbit:1;
- u8 is_ar91xx:1;
- u8 is_ar7240:1;
- u8 is_ar724x:1;
- u8 has_ar8216:1;
- u8 use_flow_control:1;
- u8 enable_sgmii_fixup:1;
- u8 disable_inline_checksum_engine:1;
-
- struct ag71xx_switch_platform_data *switch_data;
-
- void (*ddr_flush)(void);
- void (*set_speed)(int speed);
- void (*update_pll)(u32 pll_10, u32 pll_100, u32 pll_1000);
-
- unsigned int max_frame_len;
- unsigned int desc_pktlen_mask;
-};
-
-struct ag71xx_mdio_platform_data {
- u32 phy_mask;
- u8 builtin_switch:1;
- u8 is_ar7240:1;
- u8 is_ar9330:1;
- u8 is_ar934x:1;
- unsigned long mdio_clock;
- unsigned long ref_clock;
-
- void (*reset)(struct mii_bus *bus);
-};
-
-#endif /* __ASM_MACH_ATH79_PLATFORM_H */
diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h
deleted file mode 100644
index 50d5a20974..0000000000
--- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/mach-rb750.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * MikroTik RouterBOARD 750 definitions
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-#ifndef _MACH_RB750_H
-#define _MACH_RB750_H
-
-#include <linux/bitops.h>
-
-#define RB750_GPIO_LVC573_LE 0 /* Latch enable on LVC573 */
-#define RB750_GPIO_NAND_IO0 1 /* NAND I/O 0 */
-#define RB750_GPIO_NAND_IO1 2 /* NAND I/O 1 */
-#define RB750_GPIO_NAND_IO2 3 /* NAND I/O 2 */
-#define RB750_GPIO_NAND_IO3 4 /* NAND I/O 3 */
-#define RB750_GPIO_NAND_IO4 5 /* NAND I/O 4 */
-#define RB750_GPIO_NAND_IO5 6 /* NAND I/O 5 */
-#define RB750_GPIO_NAND_IO6 7 /* NAND I/O 6 */
-#define RB750_GPIO_NAND_IO7 8 /* NAND I/O 7 */
-#define RB750_GPIO_NAND_NCE 11 /* NAND Chip Enable (active low) */
-#define RB750_GPIO_NAND_RDY 12 /* NAND Ready */
-#define RB750_GPIO_NAND_CLE 14 /* NAND Command Latch Enable */
-#define RB750_GPIO_NAND_ALE 15 /* NAND Address Latch Enable */
-#define RB750_GPIO_NAND_NRE 16 /* NAND Read Enable (active low) */
-#define RB750_GPIO_NAND_NWE 17 /* NAND Write Enable (active low) */
-
-#define RB750_GPIO_BTN_RESET 1
-#define RB750_GPIO_SPI_CS0 2
-#define RB750_GPIO_LED_ACT 12
-#define RB750_GPIO_LED_PORT1 13
-#define RB750_GPIO_LED_PORT2 14
-#define RB750_GPIO_LED_PORT3 15
-#define RB750_GPIO_LED_PORT4 16
-#define RB750_GPIO_LED_PORT5 17
-
-#define RB750_LED_ACT BIT(RB750_GPIO_LED_ACT)
-#define RB750_LED_PORT1 BIT(RB750_GPIO_LED_PORT1)
-#define RB750_LED_PORT2 BIT(RB750_GPIO_LED_PORT2)
-#define RB750_LED_PORT3 BIT(RB750_GPIO_LED_PORT3)
-#define RB750_LED_PORT4 BIT(RB750_GPIO_LED_PORT4)
-#define RB750_LED_PORT5 BIT(RB750_GPIO_LED_PORT5)
-#define RB750_NAND_NCE BIT(RB750_GPIO_NAND_NCE)
-
-#define RB750_LVC573_LE BIT(RB750_GPIO_LVC573_LE)
-
-#define RB750_LED_BITS (RB750_LED_PORT1 | RB750_LED_PORT2 | RB750_LED_PORT3 | \
- RB750_LED_PORT4 | RB750_LED_PORT5 | RB750_LED_ACT)
-
-#define RB7XX_GPIO_NAND_NCE 0
-#define RB7XX_GPIO_MON 9
-#define RB7XX_GPIO_LED_ACT 11
-#define RB7XX_GPIO_USB_POWERON 13
-
-#define RB7XX_NAND_NCE BIT(RB7XX_GPIO_NAND_NCE)
-#define RB7XX_LED_ACT BIT(RB7XX_GPIO_LED_ACT)
-#define RB7XX_MONITOR BIT(RB7XX_GPIO_MON)
-#define RB7XX_USB_POWERON BIT(RB7XX_GPIO_USB_POWERON)
-
-struct rb750_led_data {
- char *name;
- char *default_trigger;
- u32 mask;
- int active_low;
-};
-
-struct rb750_led_platform_data {
- int num_leds;
- struct rb750_led_data *leds;
- void (*latch_change)(u32 clear, u32 set);
-};
-
-struct rb7xx_nand_platform_data {
- u32 nce_line;
-
- void (*enable_pins)(void);
- void (*disable_pins)(void);
- void (*latch_change)(u32, u32);
-};
-
-#endif /* _MACH_RB750_H */ \ No newline at end of file
diff --git a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h b/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
deleted file mode 100644
index 37512ba1a1..0000000000
--- a/target/linux/ar71xx/files/arch/mips/include/asm/mach-ath79/rb4xx_cpld.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * SPI driver definitions for the CPLD chip on the Mikrotik RB4xx boards
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was based on the patches for Linux 2.6.27.39 published by
- * MikroTik for their RouterBoard 4xx series devices.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#define CPLD_GPIO_nLED1 0
-#define CPLD_GPIO_nLED2 1
-#define CPLD_GPIO_nLED3 2
-#define CPLD_GPIO_nLED4 3
-#define CPLD_GPIO_FAN 4
-#define CPLD_GPIO_ALE 5
-#define CPLD_GPIO_CLE 6
-#define CPLD_GPIO_nCE 7
-#define CPLD_GPIO_nLED5 8
-
-#define CPLD_NUM_GPIOS 9
-
-#define CPLD_CFG_nLED1 BIT(CPLD_GPIO_nLED1)
-#define CPLD_CFG_nLED2 BIT(CPLD_GPIO_nLED2)
-#define CPLD_CFG_nLED3 BIT(CPLD_GPIO_nLED3)
-#define CPLD_CFG_nLED4 BIT(CPLD_GPIO_nLED4)
-#define CPLD_CFG_FAN BIT(CPLD_GPIO_FAN)
-#define CPLD_CFG_ALE BIT(CPLD_GPIO_ALE)
-#define CPLD_CFG_CLE BIT(CPLD_GPIO_CLE)
-#define CPLD_CFG_nCE BIT(CPLD_GPIO_nCE)
-#define CPLD_CFG_nLED5 BIT(CPLD_GPIO_nLED5)
-
-struct rb4xx_cpld_platform_data {
- unsigned gpio_base;
-};
-
-extern int rb4xx_cpld_change_cfg(unsigned mask, unsigned value);
-extern int rb4xx_cpld_read(unsigned char *rx_buf,
- unsigned cnt);
-extern int rb4xx_cpld_write(const unsigned char *buf, unsigned count);
diff --git a/target/linux/ar71xx/files/drivers/gpio/gpio-latch.c b/target/linux/ar71xx/files/drivers/gpio/gpio-latch.c
deleted file mode 100644
index d911f6a2cb..0000000000
--- a/target/linux/ar71xx/files/drivers/gpio/gpio-latch.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * GPIO latch driver
- *
- * Copyright (C) 2014 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-
-#include <linux/platform_data/gpio-latch.h>
-
-struct gpio_latch_chip {
- struct gpio_chip gc;
-
- struct mutex mutex;
- struct mutex latch_mutex;
- bool latch_enabled;
- int le_gpio;
- bool le_active_low;
- int *gpios;
-};
-
-static inline struct gpio_latch_chip *to_gpio_latch_chip(struct gpio_chip *gc)
-{
- return container_of(gc, struct gpio_latch_chip, gc);
-}
-
-static void gpio_latch_lock(struct gpio_latch_chip *glc, bool enable)
-{
- mutex_lock(&glc->mutex);
-
- if (enable)
- glc->latch_enabled = true;
-
- if (glc->latch_enabled)
- mutex_lock(&glc->latch_mutex);
-}
-
-static void gpio_latch_unlock(struct gpio_latch_chip *glc, bool disable)
-{
- if (glc->latch_enabled)
- mutex_unlock(&glc->latch_mutex);
-
- if (disable)
- glc->latch_enabled = true;
-
- mutex_unlock(&glc->mutex);
-}
-
-static int
-gpio_latch_get(struct gpio_chip *gc, unsigned offset)
-{
- struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
- int ret;
-
- gpio_latch_lock(glc, false);
- ret = gpio_get_value(glc->gpios[offset]);
- gpio_latch_unlock(glc, false);
-
- return ret;
-}
-
-static void
-gpio_latch_set(struct gpio_chip *gc, unsigned offset, int value)
-{
- struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
- bool enable_latch = false;
- bool disable_latch = false;
- int gpio;
-
- gpio = glc->gpios[offset];
-
- if (gpio == glc->le_gpio) {
- enable_latch = value ^ glc->le_active_low;
- disable_latch = !enable_latch;
- }
-
- gpio_latch_lock(glc, enable_latch);
- gpio_set_value(gpio, value);
- gpio_latch_unlock(glc, disable_latch);
-}
-
-static int
-gpio_latch_direction_input(struct gpio_chip *gc, unsigned offset)
-{
- struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
- int ret;
-
- gpio_latch_lock(glc, false);
- ret = gpio_direction_input(glc->gpios[offset]);
- gpio_latch_unlock(glc, false);
-
- return ret;
-}
-
-static int
-gpio_latch_direction_output(struct gpio_chip *gc, unsigned offset, int value)
-{
- struct gpio_latch_chip *glc = to_gpio_latch_chip(gc);
- bool enable_latch = false;
- bool disable_latch = false;
- int gpio;
- int ret;
-
- gpio = glc->gpios[offset];
-
- if (gpio == glc->le_gpio) {
- enable_latch = value ^ glc->le_active_low;
- disable_latch = !enable_latch;
- }
-
- gpio_latch_lock(glc, enable_latch);
- ret = gpio_direction_output(gpio, value);
- gpio_latch_unlock(glc, disable_latch);
-
- return ret;
-}
-
-static int gpio_latch_probe(struct platform_device *pdev)
-{
- struct gpio_latch_chip *glc;
- struct gpio_latch_platform_data *pdata;
- struct gpio_chip *gc;
- int size;
- int ret;
- int i;
-
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata)
- return -EINVAL;
-
- if (pdata->le_gpio_index >= pdata->num_gpios ||
- !pdata->num_gpios ||
- !pdata->gpios)
- return -EINVAL;
-
- for (i = 0; i < pdata->num_gpios; i++) {
- int gpio = pdata->gpios[i];
-
- ret = devm_gpio_request(&pdev->dev, gpio,
- GPIO_LATCH_DRIVER_NAME);
- if (ret)
- return ret;
- }
-
- glc = devm_kzalloc(&pdev->dev, sizeof(*glc), GFP_KERNEL);
- if (!glc)
- return -ENOMEM;
-
- mutex_init(&glc->mutex);
- mutex_init(&glc->latch_mutex);
-
- size = pdata->num_gpios * sizeof(glc->gpios[0]);
- glc->gpios = devm_kzalloc(&pdev->dev, size , GFP_KERNEL);
- if (!glc->gpios)
- return -ENOMEM;
-
- memcpy(glc->gpios, pdata->gpios, size);
-
- glc->le_gpio = glc->gpios[pdata->le_gpio_index];
- glc->le_active_low = pdata->le_active_low;
-
- gc = &glc->gc;
-
- gc->label = GPIO_LATCH_DRIVER_NAME;
- gc->base = pdata->base;
- gc->can_sleep = true;
- gc->ngpio = pdata->num_gpios;
- gc->get = gpio_latch_get;
- gc->set = gpio_latch_set;
- gc->direction_input = gpio_latch_direction_input,
- gc->direction_output = gpio_latch_direction_output;
-
- platform_set_drvdata(pdev, glc);
-
- ret = gpiochip_add(&glc->gc);
- if (ret)
- return ret;
-
- return 0;
-}
-
-static int gpio_latch_remove(struct platform_device *pdev)
-{
- struct gpio_latch_chip *glc = platform_get_drvdata(pdev);
-
- gpiochip_remove(&glc->gc);
- return 0;
-}
-
-
-static struct platform_driver gpio_latch_driver = {
- .probe = gpio_latch_probe,
- .remove = gpio_latch_remove,
- .driver = {
- .name = GPIO_LATCH_DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init gpio_latch_init(void)
-{
- return platform_driver_register(&gpio_latch_driver);
-}
-
-postcore_initcall(gpio_latch_init);
-
-MODULE_DESCRIPTION("GPIO latch driver");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" GPIO_LATCH_DRIVER_NAME);
diff --git a/target/linux/ar71xx/files/drivers/gpio/gpio-nxp-74hc153.c b/target/linux/ar71xx/files/drivers/gpio/gpio-nxp-74hc153.c
deleted file mode 100644
index 82e6e943ff..0000000000
--- a/target/linux/ar71xx/files/drivers/gpio/gpio-nxp-74hc153.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * NXP 74HC153 - Dual 4-input multiplexer GPIO driver
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/nxp_74hc153.h>
-
-#define NXP_74HC153_NUM_GPIOS 8
-#define NXP_74HC153_S0_MASK 0x1
-#define NXP_74HC153_S1_MASK 0x2
-#define NXP_74HC153_BANK_MASK 0x4
-
-struct nxp_74hc153_chip {
- struct device *parent;
- struct gpio_chip gpio_chip;
- struct mutex lock;
-};
-
-static struct nxp_74hc153_chip *gpio_to_nxp(struct gpio_chip *gc)
-{
- return container_of(gc, struct nxp_74hc153_chip, gpio_chip);
-}
-
-static int nxp_74hc153_direction_input(struct gpio_chip *gc, unsigned offset)
-{
- return 0;
-}
-
-static int nxp_74hc153_direction_output(struct gpio_chip *gc,
- unsigned offset, int val)
-{
- return -EINVAL;
-}
-
-static int nxp_74hc153_get_value(struct gpio_chip *gc, unsigned offset)
-{
- struct nxp_74hc153_chip *nxp;
- struct nxp_74hc153_platform_data *pdata;
- unsigned s0;
- unsigned s1;
- unsigned pin;
- int ret;
-
- nxp = gpio_to_nxp(gc);
- pdata = nxp->parent->platform_data;
-
- s0 = !!(offset & NXP_74HC153_S0_MASK);
- s1 = !!(offset & NXP_74HC153_S1_MASK);
- pin = (offset & NXP_74HC153_BANK_MASK) ? pdata->gpio_pin_2y
- : pdata->gpio_pin_1y;
-
- mutex_lock(&nxp->lock);
- gpio_set_value(pdata->gpio_pin_s0, s0);
- gpio_set_value(pdata->gpio_pin_s1, s1);
- ret = gpio_get_value(pin);
- mutex_unlock(&nxp->lock);
-
- return ret;
-}
-
-static void nxp_74hc153_set_value(struct gpio_chip *gc,
- unsigned offset, int val)
-{
- /* not supported */
-}
-
-static int nxp_74hc153_probe(struct platform_device *pdev)
-{
- struct nxp_74hc153_platform_data *pdata;
- struct nxp_74hc153_chip *nxp;
- struct gpio_chip *gc;
- int err;
-
- pdata = pdev->dev.platform_data;
- if (pdata == NULL) {
- dev_dbg(&pdev->dev, "no platform data specified\n");
- return -EINVAL;
- }
-
- nxp = kzalloc(sizeof(struct nxp_74hc153_chip), GFP_KERNEL);
- if (nxp == NULL) {
- dev_err(&pdev->dev, "no memory for private data\n");
- return -ENOMEM;
- }
-
- err = gpio_request(pdata->gpio_pin_s0, dev_name(&pdev->dev));
- if (err) {
- dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
- pdata->gpio_pin_s0, err);
- goto err_free_nxp;
- }
-
- err = gpio_request(pdata->gpio_pin_s1, dev_name(&pdev->dev));
- if (err) {
- dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
- pdata->gpio_pin_s1, err);
- goto err_free_s0;
- }
-
- err = gpio_request(pdata->gpio_pin_1y, dev_name(&pdev->dev));
- if (err) {
- dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
- pdata->gpio_pin_1y, err);
- goto err_free_s1;
- }
-
- err = gpio_request(pdata->gpio_pin_2y, dev_name(&pdev->dev));
- if (err) {
- dev_err(&pdev->dev, "unable to claim gpio %u, err=%d\n",
- pdata->gpio_pin_2y, err);
- goto err_free_1y;
- }
-
- err = gpio_direction_output(pdata->gpio_pin_s0, 0);
- if (err) {
- dev_err(&pdev->dev,
- "unable to set direction of gpio %u, err=%d\n",
- pdata->gpio_pin_s0, err);
- goto err_free_2y;
- }
-
- err = gpio_direction_output(pdata->gpio_pin_s1, 0);
- if (err) {
- dev_err(&pdev->dev,
- "unable to set direction of gpio %u, err=%d\n",
- pdata->gpio_pin_s1, err);
- goto err_free_2y;
- }
-
- err = gpio_direction_input(pdata->gpio_pin_1y);
- if (err) {
- dev_err(&pdev->dev,
- "unable to set direction of gpio %u, err=%d\n",
- pdata->gpio_pin_1y, err);
- goto err_free_2y;
- }
-
- err = gpio_direction_input(pdata->gpio_pin_2y);
- if (err) {
- dev_err(&pdev->dev,
- "unable to set direction of gpio %u, err=%d\n",
- pdata->gpio_pin_2y, err);
- goto err_free_2y;
- }
-
- nxp->parent = &pdev->dev;
- mutex_init(&nxp->lock);
-
- gc = &nxp->gpio_chip;
-
- gc->direction_input = nxp_74hc153_direction_input;
- gc->direction_output = nxp_74hc153_direction_output;
- gc->get = nxp_74hc153_get_value;
- gc->set = nxp_74hc153_set_value;
- gc->can_sleep = 1;
-
- gc->base = pdata->gpio_base;
- gc->ngpio = NXP_74HC153_NUM_GPIOS;
- gc->label = dev_name(nxp->parent);
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- gc->dev = nxp->parent;
-#else
- gc->parent = nxp->parent;
-#endif
- gc->owner = THIS_MODULE;
-
- err = gpiochip_add(&nxp->gpio_chip);
- if (err) {
- dev_err(&pdev->dev, "unable to add gpio chip, err=%d\n", err);
- goto err_free_2y;
- }
-
- platform_set_drvdata(pdev, nxp);
- return 0;
-
-err_free_2y:
- gpio_free(pdata->gpio_pin_2y);
-err_free_1y:
- gpio_free(pdata->gpio_pin_1y);
-err_free_s1:
- gpio_free(pdata->gpio_pin_s1);
-err_free_s0:
- gpio_free(pdata->gpio_pin_s0);
-err_free_nxp:
- kfree(nxp);
- return err;
-}
-
-static int nxp_74hc153_remove(struct platform_device *pdev)
-{
- struct nxp_74hc153_chip *nxp = platform_get_drvdata(pdev);
- struct nxp_74hc153_platform_data *pdata = pdev->dev.platform_data;
-
- if (nxp) {
- gpiochip_remove(&nxp->gpio_chip);
- gpio_free(pdata->gpio_pin_2y);
- gpio_free(pdata->gpio_pin_1y);
- gpio_free(pdata->gpio_pin_s1);
- gpio_free(pdata->gpio_pin_s0);
-
- kfree(nxp);
- platform_set_drvdata(pdev, NULL);
- }
-
- return 0;
-}
-
-static struct platform_driver nxp_74hc153_driver = {
- .probe = nxp_74hc153_probe,
- .remove = nxp_74hc153_remove,
- .driver = {
- .name = NXP_74HC153_DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init nxp_74hc153_init(void)
-{
- return platform_driver_register(&nxp_74hc153_driver);
-}
-subsys_initcall(nxp_74hc153_init);
-
-static void __exit nxp_74hc153_exit(void)
-{
- platform_driver_unregister(&nxp_74hc153_driver);
-}
-module_exit(nxp_74hc153_exit);
-
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_DESCRIPTION("GPIO expander driver for NXP 74HC153");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" NXP_74HC153_DRIVER_NAME);
diff --git a/target/linux/ar71xx/files/drivers/leds/leds-nu801.c b/target/linux/ar71xx/files/drivers/leds/leds-nu801.c
deleted file mode 100644
index 11e8927785..0000000000
--- a/target/linux/ar71xx/files/drivers/leds/leds-nu801.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * LED driver for NU801
- *
- * Kevin Paul Herbert
- * Copyright (c) 2012, Meraki, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/workqueue.h>
-#include <linux/delay.h>
-#include <linux/leds-nu801.h>
-
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
-
-#define MAX_NAME_LENGTH 24
-#define NUM_COLORS 3
-
-static const char * const led_nu801_colors[] = { "blue", "green", "red" };
-
-struct led_nu801_led_data {
- struct led_classdev cdev;
- struct led_nu801_data *controller;
- enum led_brightness level;
- char name[MAX_NAME_LENGTH];
-};
-
-struct led_nu801_data {
- unsigned cki;
- unsigned sdi;
- int lei;
- struct delayed_work work;
- struct led_nu801_led_data *led_chain;
- int num_leds;
- const char *device_name;
- const char *name;
- u32 ndelay;
- atomic_t pending;
-};
-
-static void led_nu801_work(struct work_struct *work)
-{
- struct led_nu801_data *controller =
- container_of(work, struct led_nu801_data, work.work);
- struct led_nu801_led_data *led;
- u16 bit;
- u16 brightness;
- int index;
-
- for (index = 0; index < controller->num_leds; index++) {
- led = &controller->led_chain[index];
- brightness = led->level << 8; /* To do: gamma correction */
- for (bit = 0x8000; bit; bit = bit >> 1) {
- gpio_set_value(controller->sdi,
- (brightness & bit) != 0);
- gpio_set_value(controller->cki, 1);
- if (unlikely(((index == (controller->num_leds - 1)) &&
- (bit == 1) &&
- (controller->lei < 0)))) {
- udelay(600);
- } else {
- ndelay(controller->ndelay);
- }
- gpio_set_value(controller->cki, 0);
- ndelay(controller->ndelay);
- }
- }
- if (controller->lei >= 0) {
- gpio_set_value(controller->lei, 1);
- ndelay(controller->ndelay);
- gpio_set_value(controller->lei, 0);
- }
- atomic_set(&controller->pending, 1);
-}
-
-static void led_nu801_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- struct led_nu801_led_data *led_dat =
- container_of(led_cdev, struct led_nu801_led_data, cdev);
- struct led_nu801_data *controller = led_dat->controller;
-
- if (led_dat->level != value) {
- led_dat->level = value;
- if (atomic_dec_and_test(&controller->pending))
- schedule_delayed_work(&led_dat->controller->work,
- (HZ/1000) + 1);
- }
-}
-
-static int led_nu801_create(struct led_nu801_data *controller,
- struct device *parent,
- int index,
- enum led_brightness brightness,
-#ifdef CONFIG_LEDS_TRIGGERS
- const char *default_trigger,
-#endif
- const char *color)
-{
- struct led_nu801_led_data *led = &controller->led_chain[index];
- int ret;
-
- scnprintf(led->name, sizeof(led->name), "%s:%s:%s%d",
- controller->device_name, color, controller->name,
- (controller->num_leds - (index + 1)) / NUM_COLORS);
- led->cdev.name = led->name;
- led->cdev.brightness_set = led_nu801_set;
-#ifdef CONFIG_LEDS_TRIGGERS
- led->cdev.default_trigger = default_trigger;
-#endif
- led->level = brightness;
- led->controller = controller;
- ret = led_classdev_register(parent, &led->cdev);
- if (ret < 0)
- goto err;
-
- return 0;
-
-err:
- kfree(led);
- return ret;
-}
-
-static int
-led_nu801_create_chain(const struct led_nu801_template *template,
- struct led_nu801_data *controller,
- struct device *parent)
-{
- int ret;
- int index;
-
- controller->cki = template->cki;
- controller->sdi = template->sdi;
- controller->lei = template->lei;
- controller->num_leds = template->num_leds * 3;
- controller->device_name = template->device_name;
- controller->name = template->name;
- controller->ndelay = template->ndelay;
- atomic_set(&controller->pending, 1);
-
- controller->led_chain = kzalloc(sizeof(struct led_nu801_led_data) *
- controller->num_leds, GFP_KERNEL);
-
- if (!controller->led_chain)
- return -ENOMEM;
-
- ret = gpio_request(controller->cki, template->name);
- if (ret < 0)
- goto err_free_chain;
-
- ret = gpio_request(controller->sdi, template->name);
- if (ret < 0)
- goto err_ret_cki;
-
- if (controller->lei >= 0) {
- ret = gpio_request(controller->lei, template->name);
- if (ret < 0)
- goto err_ret_sdi;
- ret = gpio_direction_output(controller->lei, 0);
- if (ret < 0)
- goto err_ret_lei;
- }
-
- ret = gpio_direction_output(controller->cki, 0);
- if (ret < 0)
- goto err_ret_lei;
-
- ret = gpio_direction_output(controller->sdi, 0);
- if (ret < 0)
- goto err_ret_lei;
-
- for (index = 0; index < controller->num_leds; index++) {
- ret = led_nu801_create(controller, parent, index,
- template->init_brightness
- [index % NUM_COLORS],
-#ifdef CONFIG_LEDS_TRIGGERS
- template->default_trigger,
-#endif
- template->led_colors[index % NUM_COLORS] ?
- template->led_colors[index % NUM_COLORS] :
- led_nu801_colors[index % NUM_COLORS]);
- if (ret < 0)
- goto err_ret_sdi;
- }
-
- INIT_DELAYED_WORK(&controller->work, led_nu801_work);
- schedule_delayed_work(&controller->work, 0);
-
- return 0;
-
-err_ret_lei:
- if (controller->lei >= 0)
- gpio_free(controller->lei);
-err_ret_sdi:
- gpio_free(controller->sdi);
-err_ret_cki:
- gpio_free(controller->cki);
-err_free_chain:
- kfree(controller->led_chain);
-
- return ret;
-}
-
-static void led_nu801_delete_chain(struct led_nu801_data *controller)
-{
- struct led_nu801_led_data *led_chain;
- struct led_nu801_led_data *led;
- int index;
- int num_leds;
-
- led_chain = controller->led_chain;
- controller->led_chain = 0;
- num_leds = controller->num_leds;
- controller->num_leds = 0;
- cancel_delayed_work_sync(&controller->work);
-
- for (index = 0; index < num_leds; index++) {
- led = &led_chain[index];
- led_classdev_unregister(&led->cdev);
- }
-
- gpio_free(controller->cki);
- gpio_free(controller->sdi);
- if (controller->lei >= 0)
- gpio_free(controller->lei);
-
- kfree(led_chain);
-}
-
-static struct led_nu801_data *
-leds_nu801_create_of(struct platform_device *pdev)
-{
- struct device_node *np = pdev->dev.of_node, *child;
- struct led_nu801_data *controllers;
- int count = 0, ret;
- int i = 0;
-
- for_each_child_of_node(np, child)
- count++;
- if (!count)
- return NULL;
-
- controllers = kzalloc(sizeof(struct led_nu801_data) * count,
- GFP_KERNEL);
- if (!controllers)
- return NULL;
-
- for_each_child_of_node(np, child) {
- const char *state;
- struct led_nu801_template template = {};
- struct device_node *colors;
- int jj;
-
- template.cki = of_get_named_gpio_flags(child, "cki", 0, NULL);
- template.sdi = of_get_named_gpio_flags(child, "sdi", 0, NULL);
- if (of_find_property(child, "lei", NULL)) {
- template.lei = of_get_named_gpio_flags(child, "lei",
- 0, NULL);
- } else {
- template.lei = -1;
- }
- of_property_read_u32(child, "ndelay", &template.ndelay);
- of_property_read_u32(child, "num_leds", &template.num_leds);
- template.name = of_get_property(child, "label", NULL) ? :
- child->name;
- template.default_trigger = of_get_property(child,
- "default-trigger", NULL);
-
- jj = 0;
- for_each_child_of_node(child, colors) {
- template.led_colors[jj] = of_get_property(colors,
- "label", NULL);
- state = of_get_property(colors, "state", NULL);
- if (!strncmp(state, "off", 3))
- template.init_brightness[jj] = LED_OFF;
- else if (!strncmp(state, "half", 4))
- template.init_brightness[jj] = LED_HALF;
- else if (!strncmp(state, "full", 4))
- template.init_brightness[jj] = LED_FULL;
- jj++;
- }
-
- ret = led_nu801_create_chain(&template,
- &controllers[i],
- &pdev->dev);
- if (ret < 0)
- goto err;
- i++;
- }
-
- return controllers;
-
-err:
- for (i = i - 1; i >= 0; i--)
- led_nu801_delete_chain(&controllers[i]);
- kfree(controllers);
- return NULL;
-}
-
-static int led_nu801_probe(struct platform_device *pdev)
-{
- struct led_nu801_platform_data *pdata = pdev->dev.platform_data;
- struct led_nu801_data *controllers;
- int i, ret = 0;
-
- if (!(pdata && pdata->num_controllers)) {
- controllers = leds_nu801_create_of(pdev);
- if (!controllers)
- return -ENODEV;
- }
-
- controllers = kzalloc(sizeof(struct led_nu801_data) *
- pdata->num_controllers, GFP_KERNEL);
- if (!controllers)
- return -ENOMEM;
-
- for (i = 0; i < pdata->num_controllers; i++) {
- ret = led_nu801_create_chain(&pdata->template[i],
- &controllers[i],
- &pdev->dev);
- if (ret < 0)
- goto err;
- }
-
- platform_set_drvdata(pdev, controllers);
-
- return 0;
-
-err:
- for (i = i - 1; i >= 0; i--)
- led_nu801_delete_chain(&controllers[i]);
-
- kfree(controllers);
-
- return ret;
-}
-
-static int led_nu801_remove(struct platform_device *pdev)
-{
- int i;
- struct led_nu801_platform_data *pdata = pdev->dev.platform_data;
- struct led_nu801_data *controllers;
-
- controllers = platform_get_drvdata(pdev);
-
- for (i = 0; i < pdata->num_controllers; i++)
- led_nu801_delete_chain(&controllers[i]);
-
- kfree(controllers);
-
- return 0;
-}
-
-static const struct of_device_id of_numen_leds_match[] = {
- { .compatible = "numen,leds-nu801", },
- {},
-};
-MODULE_DEVICE_TABLE(of, of_pwm_leds_match);
-
-static struct platform_driver led_nu801_driver = {
- .probe = led_nu801_probe,
- .remove = led_nu801_remove,
- .driver = {
- .name = "leds-nu801",
- .owner = THIS_MODULE,
- .of_match_table = of_numen_leds_match,
- },
-};
-
-static int __init led_nu801_init(void)
-{
- return platform_driver_register(&led_nu801_driver);
-}
-
-static void __exit led_nu801_exit(void)
-{
- platform_driver_unregister(&led_nu801_driver);
-}
-
-module_init(led_nu801_init);
-module_exit(led_nu801_exit);
-
-MODULE_AUTHOR("Kevin Paul Herbert <kph@meraki.net>");
-MODULE_DESCRIPTION("NU801 LED driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:leds-nu801");
diff --git a/target/linux/ar71xx/files/drivers/leds/leds-rb750.c b/target/linux/ar71xx/files/drivers/leds/leds-rb750.c
deleted file mode 100644
index 79e98b4882..0000000000
--- a/target/linux/ar71xx/files/drivers/leds/leds-rb750.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * LED driver for the RouterBOARD 750
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/slab.h>
-
-#include <asm/mach-ath79/mach-rb750.h>
-
-#define DRV_NAME "leds-rb750"
-
-struct rb750_led_dev {
- struct led_classdev cdev;
- u32 mask;
- int active_low;
- void (*latch_change)(u32 clear, u32 set);
-};
-
-struct rb750_led_drvdata {
- struct rb750_led_dev *led_devs;
- int num_leds;
-};
-
-static inline struct rb750_led_dev *to_rbled(struct led_classdev *led_cdev)
-{
- return (struct rb750_led_dev *)container_of(led_cdev,
- struct rb750_led_dev, cdev);
-}
-
-static void rb750_led_brightness_set(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- struct rb750_led_dev *rbled = to_rbled(led_cdev);
- int level;
-
- level = (value == LED_OFF) ? 0 : 1;
- level ^= rbled->active_low;
-
- if (level)
- rbled->latch_change(0, rbled->mask);
- else
- rbled->latch_change(rbled->mask, 0);
-}
-
-static int rb750_led_probe(struct platform_device *pdev)
-{
- struct rb750_led_platform_data *pdata;
- struct rb750_led_drvdata *drvdata;
- int ret = 0;
- int i;
-
- pdata = pdev->dev.platform_data;
- if (!pdata)
- return -EINVAL;
-
- drvdata = kzalloc(sizeof(struct rb750_led_drvdata) +
- sizeof(struct rb750_led_dev) * pdata->num_leds,
- GFP_KERNEL);
- if (!drvdata)
- return -ENOMEM;
-
- drvdata->num_leds = pdata->num_leds;
- drvdata->led_devs = (struct rb750_led_dev *) &drvdata[1];
-
- for (i = 0; i < drvdata->num_leds; i++) {
- struct rb750_led_dev *rbled = &drvdata->led_devs[i];
- struct rb750_led_data *led_data = &pdata->leds[i];
-
- rbled->cdev.name = led_data->name;
- rbled->cdev.default_trigger = led_data->default_trigger;
- rbled->cdev.brightness_set = rb750_led_brightness_set;
- rbled->cdev.brightness = LED_OFF;
-
- rbled->mask = led_data->mask;
- rbled->active_low = !!led_data->active_low;
- rbled->latch_change = pdata->latch_change;
-
- ret = led_classdev_register(&pdev->dev, &rbled->cdev);
- if (ret)
- goto err;
- }
-
- platform_set_drvdata(pdev, drvdata);
- return 0;
-
-err:
- for (i = i - 1; i >= 0; i--)
- led_classdev_unregister(&drvdata->led_devs[i].cdev);
-
- kfree(drvdata);
- return ret;
-}
-
-static int rb750_led_remove(struct platform_device *pdev)
-{
- struct rb750_led_drvdata *drvdata;
- int i;
-
- drvdata = platform_get_drvdata(pdev);
- for (i = 0; i < drvdata->num_leds; i++)
- led_classdev_unregister(&drvdata->led_devs[i].cdev);
-
- kfree(drvdata);
- return 0;
-}
-
-static struct platform_driver rb750_led_driver = {
- .probe = rb750_led_probe,
- .remove = rb750_led_remove,
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-MODULE_ALIAS("platform:leds-rb750");
-
-static int __init rb750_led_init(void)
-{
- return platform_driver_register(&rb750_led_driver);
-}
-
-static void __exit rb750_led_exit(void)
-{
- platform_driver_unregister(&rb750_led_driver);
-}
-
-module_init(rb750_led_init);
-module_exit(rb750_led_exit);
-
-MODULE_DESCRIPTION(DRV_NAME);
-MODULE_DESCRIPTION("LED driver for the RouterBOARD 750");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/files/drivers/leds/leds-wndr3700-usb.c b/target/linux/ar71xx/files/drivers/leds/leds-wndr3700-usb.c
deleted file mode 100644
index 6425b055da..0000000000
--- a/target/linux/ar71xx/files/drivers/leds/leds-wndr3700-usb.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * USB LED driver for the NETGEAR WNDR3700
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/leds.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#define DRIVER_NAME "wndr3700-led-usb"
-
-static void wndr3700_usb_led_set(struct led_classdev *cdev,
- enum led_brightness brightness)
-{
- if (brightness)
- ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
- else
- ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
-}
-
-static enum led_brightness wndr3700_usb_led_get(struct led_classdev *cdev)
-{
- return ath79_device_reset_get(AR71XX_RESET_GE1_PHY) ? LED_OFF : LED_FULL;
-}
-
-static struct led_classdev wndr3700_usb_led = {
- .name = "netgear:green:usb",
- .brightness_set = wndr3700_usb_led_set,
- .brightness_get = wndr3700_usb_led_get,
-};
-
-static int wndr3700_usb_led_probe(struct platform_device *pdev)
-{
- return led_classdev_register(&pdev->dev, &wndr3700_usb_led);
-}
-
-static int wndr3700_usb_led_remove(struct platform_device *pdev)
-{
- led_classdev_unregister(&wndr3700_usb_led);
- return 0;
-}
-
-static struct platform_driver wndr3700_usb_led_driver = {
- .probe = wndr3700_usb_led_probe,
- .remove = wndr3700_usb_led_remove,
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init wndr3700_usb_led_init(void)
-{
- return platform_driver_register(&wndr3700_usb_led_driver);
-}
-
-static void __exit wndr3700_usb_led_exit(void)
-{
- platform_driver_unregister(&wndr3700_usb_led_driver);
-}
-
-module_init(wndr3700_usb_led_init);
-module_exit(wndr3700_usb_led_exit);
-
-MODULE_DESCRIPTION("USB LED driver for the NETGEAR WNDR3700");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/target/linux/ar71xx/files/drivers/mtd/cybertan_part.c b/target/linux/ar71xx/files/drivers/mtd/cybertan_part.c
deleted file mode 100644
index 4d33c19b7e..0000000000
--- a/target/linux/ar71xx/files/drivers/mtd/cybertan_part.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright (C) 2009 Christian Daniel <cd@maintech.de>
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
- * TRX flash partition table.
- * Based on ar7 map by Felix Fietkau <nbd@nbd.name>
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/version.h>
-
-struct cybertan_header {
- char magic[4];
- u8 res1[4];
- char fw_date[3];
- char fw_ver[3];
- char id[4];
- char hw_ver;
- char unused;
- u8 flags[2];
- u8 res2[10];
-};
-
-#define TRX_PARTS 6
-#define TRX_MAGIC 0x30524448
-#define TRX_MAX_OFFSET 3
-
-struct trx_header {
- uint32_t magic; /* "HDR0" */
- uint32_t len; /* Length of file including header */
- uint32_t crc32; /* 32-bit CRC from flag_version to end of file */
- uint32_t flag_version; /* 0:15 flags, 16:31 version */
- uint32_t offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */
-};
-
-#define IH_MAGIC 0x27051956 /* Image Magic Number */
-#define IH_NMLEN 32 /* Image Name Length */
-
-struct uimage_header {
- uint32_t ih_magic; /* Image Header Magic Number */
- uint32_t ih_hcrc; /* Image Header CRC Checksum */
- uint32_t ih_time; /* Image Creation Timestamp */
- uint32_t ih_size; /* Image Data Size */
- uint32_t ih_load; /* Data» Load Address */
- uint32_t ih_ep; /* Entry Point Address */
- uint32_t ih_dcrc; /* Image Data CRC Checksum */
- uint8_t ih_os; /* Operating System */
- uint8_t ih_arch; /* CPU architecture */
- uint8_t ih_type; /* Image Type */
- uint8_t ih_comp; /* Compression Type */
- uint8_t ih_name[IH_NMLEN]; /* Image Name */
-};
-
-struct firmware_header {
- struct cybertan_header cybertan;
- struct trx_header trx;
- struct uimage_header uimage;
-} __packed;
-
-#define UBOOT_LEN 0x40000
-#define ART_LEN 0x10000
-#define NVRAM_LEN 0x10000
-
-static int cybertan_parse_partitions(struct mtd_info *master,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- struct mtd_partition **pparts,
-#else
- const struct mtd_partition **pparts,
-#endif
- struct mtd_part_parser_data *data)
-{
- struct firmware_header *header;
- struct trx_header *theader;
- struct uimage_header *uheader;
- struct mtd_partition *trx_parts;
- size_t retlen;
- unsigned int kernel_len;
- unsigned int uboot_len;
- unsigned int nvram_len;
- unsigned int art_len;
- int ret;
-
- uboot_len = max_t(unsigned int, master->erasesize, UBOOT_LEN);
- nvram_len = max_t(unsigned int, master->erasesize, NVRAM_LEN);
- art_len = max_t(unsigned int, master->erasesize, ART_LEN);
-
- trx_parts = kzalloc(TRX_PARTS * sizeof(struct mtd_partition),
- GFP_KERNEL);
- if (!trx_parts) {
- ret = -ENOMEM;
- goto out;
- }
-
- header = vmalloc(sizeof(*header));
- if (!header) {
- return -ENOMEM;
- goto free_parts;
- }
-
- ret = mtd_read(master, uboot_len, sizeof(*header),
- &retlen, (void *) header);
- if (ret)
- goto free_hdr;
-
- if (retlen != sizeof(*header)) {
- ret = -EIO;
- goto free_hdr;
- }
-
- theader = &header->trx;
- if (le32_to_cpu(theader->magic) != TRX_MAGIC) {
- printk(KERN_NOTICE "%s: no TRX header found\n", master->name);
- goto free_hdr;
- }
-
- uheader = &header->uimage;
- if (uheader->ih_magic != IH_MAGIC) {
- printk(KERN_NOTICE "%s: no uImage found\n", master->name);
- goto free_hdr;
- }
-
- kernel_len = le32_to_cpu(theader->offsets[1]) +
- sizeof(struct cybertan_header);
-
- trx_parts[0].name = "u-boot";
- trx_parts[0].offset = 0;
- trx_parts[0].size = uboot_len;
- trx_parts[0].mask_flags = MTD_WRITEABLE;
-
- trx_parts[1].name = "kernel";
- trx_parts[1].offset = trx_parts[0].offset + trx_parts[0].size;
- trx_parts[1].size = kernel_len;
- trx_parts[1].mask_flags = 0;
-
- trx_parts[2].name = "rootfs";
- trx_parts[2].offset = trx_parts[1].offset + trx_parts[1].size;
- trx_parts[2].size = master->size - uboot_len - nvram_len - art_len -
- trx_parts[1].size;
- trx_parts[2].mask_flags = 0;
-
- trx_parts[3].name = "nvram";
- trx_parts[3].offset = master->size - nvram_len - art_len;
- trx_parts[3].size = nvram_len;
- trx_parts[3].mask_flags = MTD_WRITEABLE;
-
- trx_parts[4].name = "art";
- trx_parts[4].offset = master->size - art_len;
- trx_parts[4].size = art_len;
- trx_parts[4].mask_flags = MTD_WRITEABLE;
-
- trx_parts[5].name = "firmware";
- trx_parts[5].offset = uboot_len;
- trx_parts[5].size = master->size - uboot_len - nvram_len - art_len;
- trx_parts[5].mask_flags = 0;
-
- vfree(header);
-
- *pparts = trx_parts;
- return TRX_PARTS;
-
-free_hdr:
- vfree(header);
-free_parts:
- kfree(trx_parts);
-out:
- return ret;
-}
-
-static struct mtd_part_parser cybertan_parser = {
- .owner = THIS_MODULE,
- .parse_fn = cybertan_parse_partitions,
- .name = "cybertan",
-};
-
-static int __init cybertan_parser_init(void)
-{
- register_mtd_parser(&cybertan_parser);
-
- return 0;
-}
-
-module_init(cybertan_parser_init);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Christian Daniel <cd@maintech.de>");
diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c b/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c
deleted file mode 100644
index 2e25c6b885..0000000000
--- a/target/linux/ar71xx/files/drivers/mtd/nand/ar934x_nfc.c
+++ /dev/null
@@ -1,1591 +0,0 @@
-/*
- * Driver for the built-in NAND controller of the Atheros AR934x SoCs
- *
- * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/version.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/mtd/mtd.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-
-#include <linux/platform/ar934x_nfc.h>
-
-#define AR934X_NFC_REG_CMD 0x00
-#define AR934X_NFC_REG_CTRL 0x04
-#define AR934X_NFC_REG_STATUS 0x08
-#define AR934X_NFC_REG_INT_MASK 0x0c
-#define AR934X_NFC_REG_INT_STATUS 0x10
-#define AR934X_NFC_REG_ECC_CTRL 0x14
-#define AR934X_NFC_REG_ECC_OFFSET 0x18
-#define AR934X_NFC_REG_ADDR0_0 0x1c
-#define AR934X_NFC_REG_ADDR0_1 0x24
-#define AR934X_NFC_REG_ADDR1_0 0x20
-#define AR934X_NFC_REG_ADDR1_1 0x28
-#define AR934X_NFC_REG_SPARE_SIZE 0x30
-#define AR934X_NFC_REG_PROTECT 0x38
-#define AR934X_NFC_REG_LOOKUP_EN 0x40
-#define AR934X_NFC_REG_LOOKUP(_x) (0x44 + (_i) * 4)
-#define AR934X_NFC_REG_DMA_ADDR 0x64
-#define AR934X_NFC_REG_DMA_COUNT 0x68
-#define AR934X_NFC_REG_DMA_CTRL 0x6c
-#define AR934X_NFC_REG_MEM_CTRL 0x80
-#define AR934X_NFC_REG_DATA_SIZE 0x84
-#define AR934X_NFC_REG_READ_STATUS 0x88
-#define AR934X_NFC_REG_TIME_SEQ 0x8c
-#define AR934X_NFC_REG_TIMINGS_ASYN 0x90
-#define AR934X_NFC_REG_TIMINGS_SYN 0x94
-#define AR934X_NFC_REG_FIFO_DATA 0x98
-#define AR934X_NFC_REG_TIME_MODE 0x9c
-#define AR934X_NFC_REG_DMA_ADDR_OFFS 0xa0
-#define AR934X_NFC_REG_FIFO_INIT 0xb0
-#define AR934X_NFC_REG_GEN_SEQ_CTRL 0xb4
-
-#define AR934X_NFC_CMD_CMD_SEQ_S 0
-#define AR934X_NFC_CMD_CMD_SEQ_M 0x3f
-#define AR934X_NFC_CMD_SEQ_1C 0x00
-#define AR934X_NFC_CMD_SEQ_ERASE 0x0e
-#define AR934X_NFC_CMD_SEQ_12 0x0c
-#define AR934X_NFC_CMD_SEQ_1C1AXR 0x21
-#define AR934X_NFC_CMD_SEQ_S 0x24
-#define AR934X_NFC_CMD_SEQ_1C3AXR 0x27
-#define AR934X_NFC_CMD_SEQ_1C5A1CXR 0x2a
-#define AR934X_NFC_CMD_SEQ_18 0x32
-#define AR934X_NFC_CMD_INPUT_SEL_SIU 0
-#define AR934X_NFC_CMD_INPUT_SEL_DMA BIT(6)
-#define AR934X_NFC_CMD_ADDR_SEL_0 0
-#define AR934X_NFC_CMD_ADDR_SEL_1 BIT(7)
-#define AR934X_NFC_CMD_CMD0_S 8
-#define AR934X_NFC_CMD_CMD0_M 0xff
-#define AR934X_NFC_CMD_CMD1_S 16
-#define AR934X_NFC_CMD_CMD1_M 0xff
-#define AR934X_NFC_CMD_CMD2_S 24
-#define AR934X_NFC_CMD_CMD2_M 0xff
-
-#define AR934X_NFC_CTRL_ADDR_CYCLE0_M 0x7
-#define AR934X_NFC_CTRL_ADDR_CYCLE0_S 0
-#define AR934X_NFC_CTRL_SPARE_EN BIT(3)
-#define AR934X_NFC_CTRL_INT_EN BIT(4)
-#define AR934X_NFC_CTRL_ECC_EN BIT(5)
-#define AR934X_NFC_CTRL_BLOCK_SIZE_S 6
-#define AR934X_NFC_CTRL_BLOCK_SIZE_M 0x3
-#define AR934X_NFC_CTRL_BLOCK_SIZE_32 0
-#define AR934X_NFC_CTRL_BLOCK_SIZE_64 1
-#define AR934X_NFC_CTRL_BLOCK_SIZE_128 2
-#define AR934X_NFC_CTRL_BLOCK_SIZE_256 3
-#define AR934X_NFC_CTRL_PAGE_SIZE_S 8
-#define AR934X_NFC_CTRL_PAGE_SIZE_M 0x7
-#define AR934X_NFC_CTRL_PAGE_SIZE_256 0
-#define AR934X_NFC_CTRL_PAGE_SIZE_512 1
-#define AR934X_NFC_CTRL_PAGE_SIZE_1024 2
-#define AR934X_NFC_CTRL_PAGE_SIZE_2048 3
-#define AR934X_NFC_CTRL_PAGE_SIZE_4096 4
-#define AR934X_NFC_CTRL_PAGE_SIZE_8192 5
-#define AR934X_NFC_CTRL_PAGE_SIZE_16384 6
-#define AR934X_NFC_CTRL_CUSTOM_SIZE_EN BIT(11)
-#define AR934X_NFC_CTRL_IO_WIDTH_8BITS 0
-#define AR934X_NFC_CTRL_IO_WIDTH_16BITS BIT(12)
-#define AR934X_NFC_CTRL_LOOKUP_EN BIT(13)
-#define AR934X_NFC_CTRL_PROT_EN BIT(14)
-#define AR934X_NFC_CTRL_WORK_MODE_ASYNC 0
-#define AR934X_NFC_CTRL_WORK_MODE_SYNC BIT(15)
-#define AR934X_NFC_CTRL_ADDR0_AUTO_INC BIT(16)
-#define AR934X_NFC_CTRL_ADDR1_AUTO_INC BIT(17)
-#define AR934X_NFC_CTRL_ADDR_CYCLE1_M 0x7
-#define AR934X_NFC_CTRL_ADDR_CYCLE1_S 18
-#define AR934X_NFC_CTRL_SMALL_PAGE BIT(21)
-
-#define AR934X_NFC_DMA_CTRL_DMA_START BIT(7)
-#define AR934X_NFC_DMA_CTRL_DMA_DIR_WRITE 0
-#define AR934X_NFC_DMA_CTRL_DMA_DIR_READ BIT(6)
-#define AR934X_NFC_DMA_CTRL_DMA_MODE_SG BIT(5)
-#define AR934X_NFC_DMA_CTRL_DMA_BURST_S 2
-#define AR934X_NFC_DMA_CTRL_DMA_BURST_0 0
-#define AR934X_NFC_DMA_CTRL_DMA_BURST_1 1
-#define AR934X_NFC_DMA_CTRL_DMA_BURST_2 2
-#define AR934X_NFC_DMA_CTRL_DMA_BURST_3 3
-#define AR934X_NFC_DMA_CTRL_DMA_BURST_4 4
-#define AR934X_NFC_DMA_CTRL_DMA_BURST_5 5
-#define AR934X_NFC_DMA_CTRL_ERR_FLAG BIT(1)
-#define AR934X_NFC_DMA_CTRL_DMA_READY BIT(0)
-
-#define AR934X_NFC_INT_DEV_RDY(_x) BIT(4 + (_x))
-#define AR934X_NFC_INT_CMD_END BIT(1)
-
-#define AR934X_NFC_ECC_CTRL_ERR_THRES_S 8
-#define AR934X_NFC_ECC_CTRL_ERR_THRES_M 0x1f
-#define AR934X_NFC_ECC_CTRL_ECC_CAP_S 5
-#define AR934X_NFC_ECC_CTRL_ECC_CAP_M 0x7
-#define AR934X_NFC_ECC_CTRL_ECC_CAP_2 0
-#define AR934X_NFC_ECC_CTRL_ECC_CAP_4 1
-#define AR934X_NFC_ECC_CTRL_ECC_CAP_6 2
-#define AR934X_NFC_ECC_CTRL_ECC_CAP_8 3
-#define AR934X_NFC_ECC_CTRL_ECC_CAP_10 4
-#define AR934X_NFC_ECC_CTRL_ECC_CAP_12 5
-#define AR934X_NFC_ECC_CTRL_ECC_CAP_14 6
-#define AR934X_NFC_ECC_CTRL_ECC_CAP_16 7
-#define AR934X_NFC_ECC_CTRL_ERR_OVER BIT(2)
-#define AR934X_NFC_ECC_CTRL_ERR_UNCORRECT BIT(1)
-#define AR934X_NFC_ECC_CTRL_ERR_CORRECT BIT(0)
-
-#define AR934X_NFC_ECC_OFFS_OFSET_M 0xffff
-
-/* default timing values */
-#define AR934X_NFC_TIME_SEQ_DEFAULT 0x7fff
-#define AR934X_NFC_TIMINGS_ASYN_DEFAULT 0x22
-#define AR934X_NFC_TIMINGS_SYN_DEFAULT 0xf
-
-#define AR934X_NFC_ID_BUF_SIZE 8
-#define AR934X_NFC_DEV_READY_TIMEOUT 25 /* msecs */
-#define AR934X_NFC_DMA_READY_TIMEOUT 25 /* msecs */
-#define AR934X_NFC_DONE_TIMEOUT 1000
-#define AR934X_NFC_DMA_RETRIES 20
-
-#define AR934X_NFC_USE_IRQ true
-#define AR934X_NFC_IRQ_MASK AR934X_NFC_INT_DEV_RDY(0)
-
-#define AR934X_NFC_GENSEQ_SMALL_PAGE_READ 0x30043
-
-#undef AR934X_NFC_DEBUG_DATA
-#undef AR934X_NFC_DEBUG
-
-struct ar934x_nfc;
-
-static inline __attribute__ ((format (printf, 2, 3)))
-void _nfc_dbg(struct ar934x_nfc *nfc, const char *fmt, ...)
-{
-}
-
-#ifdef AR934X_NFC_DEBUG
-#define nfc_dbg(_nfc, fmt, ...) \
- dev_info((_nfc)->parent, fmt, ##__VA_ARGS__)
-#else
-#define nfc_dbg(_nfc, fmt, ...) \
- _nfc_dbg((_nfc), fmt, ##__VA_ARGS__)
-#endif /* AR934X_NFC_DEBUG */
-
-#ifdef AR934X_NFC_DEBUG_DATA
-static void
-nfc_debug_data(const char *label, void *data, int len)
-{
- print_hex_dump(KERN_WARNING, label, DUMP_PREFIX_OFFSET, 16, 1,
- data, len, 0);
-}
-#else
-static inline void
-nfc_debug_data(const char *label, void *data, int len) {}
-#endif /* AR934X_NFC_DEBUG_DATA */
-
-struct ar934x_nfc {
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- struct mtd_info mtd;
-#endif
- struct nand_chip nand_chip;
- struct device *parent;
- void __iomem *base;
- void (*select_chip)(int chip_no);
- bool swap_dma;
- int irq;
- wait_queue_head_t irq_waitq;
-
- bool spurious_irq_expected;
- u32 irq_status;
-
- u32 ctrl_reg;
- u32 ecc_ctrl_reg;
- u32 ecc_offset_reg;
- u32 ecc_thres;
- u32 ecc_oob_pos;
-
- bool small_page;
- unsigned int addr_count0;
- unsigned int addr_count1;
-
- u8 *buf;
- dma_addr_t buf_dma;
- unsigned int buf_size;
- int buf_index;
-
- bool read_id;
-
- int erase1_page_addr;
-
- int rndout_page_addr;
- int rndout_read_cmd;
-
- int seqin_page_addr;
- int seqin_column;
- int seqin_read_cmd;
-};
-
-static void ar934x_nfc_restart(struct ar934x_nfc *nfc);
-
-static inline bool
-is_all_ff(u8 *buf, int len)
-{
- while (len--)
- if (buf[len] != 0xff)
- return false;
-
- return true;
-}
-
-static inline void
-ar934x_nfc_wr(struct ar934x_nfc *nfc, unsigned reg, u32 val)
-{
- __raw_writel(val, nfc->base + reg);
-}
-
-static inline u32
-ar934x_nfc_rr(struct ar934x_nfc *nfc, unsigned reg)
-{
- return __raw_readl(nfc->base + reg);
-}
-
-static inline struct ar934x_nfc_platform_data *
-ar934x_nfc_get_platform_data(struct ar934x_nfc *nfc)
-{
- return nfc->parent->platform_data;
-}
-
-static inline struct
-ar934x_nfc *mtd_to_ar934x_nfc(struct mtd_info *mtd)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- return container_of(mtd, struct ar934x_nfc, mtd);
-#else
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- return container_of(chip, struct ar934x_nfc, nand_chip);
-#endif
-}
-
-static struct mtd_info *ar934x_nfc_to_mtd(struct ar934x_nfc *nfc)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- return &nfc->mtd;
-#else
- return nand_to_mtd(&nfc->nand_chip);
-#endif
-}
-
-static inline bool ar934x_nfc_use_irq(struct ar934x_nfc *nfc)
-{
- return AR934X_NFC_USE_IRQ;
-}
-
-static inline void ar934x_nfc_write_cmd_reg(struct ar934x_nfc *nfc, u32 cmd_reg)
-{
- wmb();
-
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_CMD, cmd_reg);
- /* flush write */
- ar934x_nfc_rr(nfc, AR934X_NFC_REG_CMD);
-}
-
-static bool
-__ar934x_nfc_dev_ready(struct ar934x_nfc *nfc)
-{
- u32 status;
-
- status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_STATUS);
- return (status & 0xff) == 0xff;
-}
-
-static inline bool
-__ar934x_nfc_is_dma_ready(struct ar934x_nfc *nfc)
-{
- u32 status;
-
- status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_DMA_CTRL);
- return (status & AR934X_NFC_DMA_CTRL_DMA_READY) != 0;
-}
-
-static int
-ar934x_nfc_wait_dev_ready(struct ar934x_nfc *nfc)
-{
- unsigned long timeout;
-
- timeout = jiffies + msecs_to_jiffies(AR934X_NFC_DEV_READY_TIMEOUT);
- do {
- if (__ar934x_nfc_dev_ready(nfc))
- return 0;
- } while time_before(jiffies, timeout);
-
- nfc_dbg(nfc, "timeout waiting for device ready, status:%08x int:%08x\n",
- ar934x_nfc_rr(nfc, AR934X_NFC_REG_STATUS),
- ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS));
- return -ETIMEDOUT;
-}
-
-static int
-ar934x_nfc_wait_dma_ready(struct ar934x_nfc *nfc)
-{
- unsigned long timeout;
-
- timeout = jiffies + msecs_to_jiffies(AR934X_NFC_DMA_READY_TIMEOUT);
- do {
- if (__ar934x_nfc_is_dma_ready(nfc))
- return 0;
- } while time_before(jiffies, timeout);
-
- nfc_dbg(nfc, "timeout waiting for DMA ready, dma_ctrl:%08x\n",
- ar934x_nfc_rr(nfc, AR934X_NFC_REG_DMA_CTRL));
- return -ETIMEDOUT;
-}
-
-static int
-ar934x_nfc_wait_irq(struct ar934x_nfc *nfc)
-{
- long timeout;
- int ret;
-
- timeout = wait_event_timeout(nfc->irq_waitq,
- (nfc->irq_status & AR934X_NFC_IRQ_MASK) != 0,
- msecs_to_jiffies(AR934X_NFC_DEV_READY_TIMEOUT));
-
- ret = 0;
- if (!timeout) {
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_MASK, 0);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
- /* flush write */
- ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS);
-
- nfc_dbg(nfc,
- "timeout waiting for interrupt, status:%08x\n",
- nfc->irq_status);
- ret = -ETIMEDOUT;
- }
-
- nfc->irq_status = 0;
- return ret;
-}
-
-static int
-ar934x_nfc_wait_done(struct ar934x_nfc *nfc)
-{
- int ret;
-
- if (ar934x_nfc_use_irq(nfc))
- ret = ar934x_nfc_wait_irq(nfc);
- else
- ret = ar934x_nfc_wait_dev_ready(nfc);
-
- if (ret)
- return ret;
-
- return ar934x_nfc_wait_dma_ready(nfc);
-}
-
-static int
-ar934x_nfc_alloc_buf(struct ar934x_nfc *nfc, unsigned size)
-{
- nfc->buf = dma_alloc_coherent(nfc->parent, size,
- &nfc->buf_dma, GFP_KERNEL);
- if (nfc->buf == NULL) {
- dev_err(nfc->parent, "no memory for DMA buffer\n");
- return -ENOMEM;
- }
-
- nfc->buf_size = size;
- nfc_dbg(nfc, "buf:%p size:%u\n", nfc->buf, nfc->buf_size);
-
- return 0;
-}
-
-static void
-ar934x_nfc_free_buf(struct ar934x_nfc *nfc)
-{
- dma_free_coherent(nfc->parent, nfc->buf_size, nfc->buf, nfc->buf_dma);
-}
-
-static void
-ar934x_nfc_get_addr(struct ar934x_nfc *nfc, int column, int page_addr,
- u32 *addr0, u32 *addr1)
-{
- u32 a0, a1;
-
- a0 = 0;
- a1 = 0;
-
- if (column == -1) {
- /* ERASE1 */
- a0 = (page_addr & 0xffff) << 16;
- a1 = (page_addr >> 16) & 0xf;
- } else if (page_addr != -1) {
- /* SEQIN, READ0, etc.. */
-
- /* TODO: handle 16bit bus width */
- if (nfc->small_page) {
- a0 = column & 0xff;
- a0 |= (page_addr & 0xff) << 8;
- a0 |= ((page_addr >> 8) & 0xff) << 16;
- a0 |= ((page_addr >> 16) & 0xff) << 24;
- } else {
- a0 = column & 0x0FFF;
- a0 |= (page_addr & 0xffff) << 16;
-
- if (nfc->addr_count0 > 4)
- a1 = (page_addr >> 16) & 0xf;
- }
- }
-
- *addr0 = a0;
- *addr1 = a1;
-}
-
-static void
-ar934x_nfc_send_cmd(struct ar934x_nfc *nfc, unsigned command)
-{
- u32 cmd_reg;
-
- cmd_reg = AR934X_NFC_CMD_INPUT_SEL_SIU | AR934X_NFC_CMD_ADDR_SEL_0 |
- AR934X_NFC_CMD_SEQ_1C;
- cmd_reg |= (command & AR934X_NFC_CMD_CMD0_M) << AR934X_NFC_CMD_CMD0_S;
-
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg);
-
- ar934x_nfc_write_cmd_reg(nfc, cmd_reg);
- ar934x_nfc_wait_dev_ready(nfc);
-}
-
-static int
-ar934x_nfc_do_rw_command(struct ar934x_nfc *nfc, int column, int page_addr,
- int len, u32 cmd_reg, u32 ctrl_reg, bool write)
-{
- u32 addr0, addr1;
- u32 dma_ctrl;
- int dir;
- int err;
- int retries = 0;
-
- WARN_ON(len & 3);
-
- if (WARN_ON(len > nfc->buf_size))
- dev_err(nfc->parent, "len=%d > buf_size=%d", len, nfc->buf_size);
-
- if (write) {
- dma_ctrl = AR934X_NFC_DMA_CTRL_DMA_DIR_WRITE;
- dir = DMA_TO_DEVICE;
- } else {
- dma_ctrl = AR934X_NFC_DMA_CTRL_DMA_DIR_READ;
- dir = DMA_FROM_DEVICE;
- }
-
- ar934x_nfc_get_addr(nfc, column, page_addr, &addr0, &addr1);
-
- dma_ctrl |= AR934X_NFC_DMA_CTRL_DMA_START |
- (AR934X_NFC_DMA_CTRL_DMA_BURST_3 <<
- AR934X_NFC_DMA_CTRL_DMA_BURST_S);
-
- cmd_reg |= AR934X_NFC_CMD_INPUT_SEL_DMA | AR934X_NFC_CMD_ADDR_SEL_0;
- ctrl_reg |= AR934X_NFC_CTRL_INT_EN;
-
- nfc_dbg(nfc, "%s a0:%08x a1:%08x len:%x cmd:%08x dma:%08x ctrl:%08x\n",
- (write) ? "write" : "read",
- addr0, addr1, len, cmd_reg, dma_ctrl, ctrl_reg);
-
-retry:
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_0, addr0);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_1, addr1);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_ADDR, nfc->buf_dma);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_COUNT, len);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_DATA_SIZE, len);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, ctrl_reg);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_CTRL, dma_ctrl);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_ECC_CTRL, nfc->ecc_ctrl_reg);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_ECC_OFFSET, nfc->ecc_offset_reg);
-
- if (ar934x_nfc_use_irq(nfc)) {
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_MASK, AR934X_NFC_IRQ_MASK);
- /* flush write */
- ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_MASK);
- }
-
- ar934x_nfc_write_cmd_reg(nfc, cmd_reg);
- err = ar934x_nfc_wait_done(nfc);
- if (err) {
- dev_dbg(nfc->parent, "%s operation stuck at page %d\n",
- (write) ? "write" : "read", page_addr);
-
- ar934x_nfc_restart(nfc);
- if (retries++ < AR934X_NFC_DMA_RETRIES)
- goto retry;
-
- dev_err(nfc->parent, "%s operation failed on page %d\n",
- (write) ? "write" : "read", page_addr);
- }
-
- return err;
-}
-
-static int
-ar934x_nfc_send_readid(struct ar934x_nfc *nfc, unsigned command)
-{
- u32 cmd_reg;
- int err;
-
- nfc_dbg(nfc, "readid, cmd:%02x\n", command);
-
- cmd_reg = AR934X_NFC_CMD_SEQ_1C1AXR;
- cmd_reg |= (command & AR934X_NFC_CMD_CMD0_M) << AR934X_NFC_CMD_CMD0_S;
-
- err = ar934x_nfc_do_rw_command(nfc, -1, -1, AR934X_NFC_ID_BUF_SIZE,
- cmd_reg, nfc->ctrl_reg, false);
-
- nfc_debug_data("[id] ", nfc->buf, AR934X_NFC_ID_BUF_SIZE);
-
- return err;
-}
-
-static int
-ar934x_nfc_send_read(struct ar934x_nfc *nfc, unsigned command, int column,
- int page_addr, int len)
-{
- u32 cmd_reg;
- int err;
-
- nfc_dbg(nfc, "read, column=%d page=%d len=%d\n",
- column, page_addr, len);
-
- cmd_reg = (command & AR934X_NFC_CMD_CMD0_M) << AR934X_NFC_CMD_CMD0_S;
-
- if (nfc->small_page) {
- cmd_reg |= AR934X_NFC_CMD_SEQ_18;
- } else {
- cmd_reg |= NAND_CMD_READSTART << AR934X_NFC_CMD_CMD1_S;
- cmd_reg |= AR934X_NFC_CMD_SEQ_1C5A1CXR;
- }
-
- err = ar934x_nfc_do_rw_command(nfc, column, page_addr, len,
- cmd_reg, nfc->ctrl_reg, false);
-
- nfc_debug_data("[data] ", nfc->buf, len);
-
- return err;
-}
-
-static void
-ar934x_nfc_send_erase(struct ar934x_nfc *nfc, unsigned command, int column,
- int page_addr)
-{
- u32 addr0, addr1;
- u32 ctrl_reg;
- u32 cmd_reg;
-
- ar934x_nfc_get_addr(nfc, column, page_addr, &addr0, &addr1);
-
- ctrl_reg = nfc->ctrl_reg;
- if (nfc->small_page) {
- /* override number of address cycles for the erase command */
- ctrl_reg &= ~(AR934X_NFC_CTRL_ADDR_CYCLE0_M <<
- AR934X_NFC_CTRL_ADDR_CYCLE0_S);
- ctrl_reg &= ~(AR934X_NFC_CTRL_ADDR_CYCLE1_M <<
- AR934X_NFC_CTRL_ADDR_CYCLE1_S);
- ctrl_reg &= ~(AR934X_NFC_CTRL_SMALL_PAGE);
- ctrl_reg |= (nfc->addr_count0 + 1) <<
- AR934X_NFC_CTRL_ADDR_CYCLE0_S;
- }
-
- cmd_reg = NAND_CMD_ERASE1 << AR934X_NFC_CMD_CMD0_S;
- cmd_reg |= command << AR934X_NFC_CMD_CMD1_S;
- cmd_reg |= AR934X_NFC_CMD_SEQ_ERASE;
-
- nfc_dbg(nfc, "erase page %d, a0:%08x a1:%08x cmd:%08x ctrl:%08x\n",
- page_addr, addr0, addr1, cmd_reg, ctrl_reg);
-
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, ctrl_reg);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_0, addr0);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_ADDR0_1, addr1);
-
- ar934x_nfc_write_cmd_reg(nfc, cmd_reg);
- ar934x_nfc_wait_dev_ready(nfc);
-}
-
-static int
-ar934x_nfc_send_write(struct ar934x_nfc *nfc, unsigned command, int column,
- int page_addr, int len)
-{
- u32 cmd_reg;
-
- nfc_dbg(nfc, "write, column=%d page=%d len=%d\n",
- column, page_addr, len);
-
- nfc_debug_data("[data] ", nfc->buf, len);
-
- cmd_reg = NAND_CMD_SEQIN << AR934X_NFC_CMD_CMD0_S;
- cmd_reg |= command << AR934X_NFC_CMD_CMD1_S;
- cmd_reg |= AR934X_NFC_CMD_SEQ_12;
-
- return ar934x_nfc_do_rw_command(nfc, column, page_addr, len,
- cmd_reg, nfc->ctrl_reg, true);
-}
-
-static void
-ar934x_nfc_read_status(struct ar934x_nfc *nfc)
-{
- u32 cmd_reg;
- u32 status;
-
- cmd_reg = NAND_CMD_STATUS << AR934X_NFC_CMD_CMD0_S;
- cmd_reg |= AR934X_NFC_CMD_SEQ_S;
-
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg);
-
- ar934x_nfc_write_cmd_reg(nfc, cmd_reg);
- ar934x_nfc_wait_dev_ready(nfc);
-
- status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_READ_STATUS);
-
- nfc_dbg(nfc, "read status, cmd:%08x status:%02x\n",
- cmd_reg, (status & 0xff));
-
- if (nfc->swap_dma)
- nfc->buf[0 ^ 3] = status;
- else
- nfc->buf[0] = status;
-}
-
-static void
-ar934x_nfc_cmdfunc(struct mtd_info *mtd, unsigned int command, int column,
- int page_addr)
-{
- struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
- struct nand_chip *nand = &nfc->nand_chip;
-
- nfc->read_id = false;
- if (command != NAND_CMD_PAGEPROG)
- nfc->buf_index = 0;
-
- switch (command) {
- case NAND_CMD_RESET:
- ar934x_nfc_send_cmd(nfc, command);
- break;
-
- case NAND_CMD_READID:
- nfc->read_id = true;
- ar934x_nfc_send_readid(nfc, command);
- break;
-
- case NAND_CMD_READ0:
- case NAND_CMD_READ1:
- if (nfc->small_page) {
- ar934x_nfc_send_read(nfc, command, column, page_addr,
- mtd->writesize + mtd->oobsize);
- } else {
- ar934x_nfc_send_read(nfc, command, 0, page_addr,
- mtd->writesize + mtd->oobsize);
- nfc->buf_index = column;
- nfc->rndout_page_addr = page_addr;
- nfc->rndout_read_cmd = command;
- }
- break;
-
- case NAND_CMD_READOOB:
- if (nfc->small_page)
- ar934x_nfc_send_read(nfc, NAND_CMD_READOOB,
- column, page_addr,
- mtd->oobsize);
- else
- ar934x_nfc_send_read(nfc, NAND_CMD_READ0,
- mtd->writesize, page_addr,
- mtd->oobsize);
- break;
-
- case NAND_CMD_RNDOUT:
- if (WARN_ON(nfc->small_page))
- break;
-
- /* emulate subpage read */
- ar934x_nfc_send_read(nfc, nfc->rndout_read_cmd, 0,
- nfc->rndout_page_addr,
- mtd->writesize + mtd->oobsize);
- nfc->buf_index = column;
- break;
-
- case NAND_CMD_ERASE1:
- nfc->erase1_page_addr = page_addr;
- break;
-
- case NAND_CMD_ERASE2:
- ar934x_nfc_send_erase(nfc, command, -1, nfc->erase1_page_addr);
- break;
-
- case NAND_CMD_STATUS:
- ar934x_nfc_read_status(nfc);
- break;
-
- case NAND_CMD_SEQIN:
- if (nfc->small_page) {
- /* output read command */
- if (column >= mtd->writesize) {
- column -= mtd->writesize;
- nfc->seqin_read_cmd = NAND_CMD_READOOB;
- } else if (column < 256) {
- nfc->seqin_read_cmd = NAND_CMD_READ0;
- } else {
- column -= 256;
- nfc->seqin_read_cmd = NAND_CMD_READ1;
- }
- } else {
- nfc->seqin_read_cmd = NAND_CMD_READ0;
- }
- nfc->seqin_column = column;
- nfc->seqin_page_addr = page_addr;
- break;
-
- case NAND_CMD_PAGEPROG:
- if (nand->ecc.mode == NAND_ECC_HW) {
- /* the data is already written */
- break;
- }
-
- if (nfc->small_page)
- ar934x_nfc_send_cmd(nfc, nfc->seqin_read_cmd);
-
- ar934x_nfc_send_write(nfc, command, nfc->seqin_column,
- nfc->seqin_page_addr,
- nfc->buf_index);
- break;
-
- default:
- dev_err(nfc->parent,
- "unsupported command: %x, column:%d page_addr=%d\n",
- command, column, page_addr);
- break;
- }
-}
-
-static int
-ar934x_nfc_dev_ready(struct mtd_info *mtd)
-{
- struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
-
- return __ar934x_nfc_dev_ready(nfc);
-}
-
-static void
-ar934x_nfc_select_chip(struct mtd_info *mtd, int chip_no)
-{
- struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
-
- if (nfc->select_chip)
- nfc->select_chip(chip_no);
-}
-
-static u8
-ar934x_nfc_read_byte(struct mtd_info *mtd)
-{
- struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
- u8 data;
-
- WARN_ON(nfc->buf_index >= nfc->buf_size);
-
- if (nfc->swap_dma || nfc->read_id)
- data = nfc->buf[nfc->buf_index ^ 3];
- else
- data = nfc->buf[nfc->buf_index];
-
- nfc->buf_index++;
-
- return data;
-}
-
-static void
-ar934x_nfc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
-{
- struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
- int i;
-
- WARN_ON(nfc->buf_index + len > nfc->buf_size);
-
- if (nfc->swap_dma) {
- for (i = 0; i < len; i++) {
- nfc->buf[nfc->buf_index ^ 3] = buf[i];
- nfc->buf_index++;
- }
- } else {
- for (i = 0; i < len; i++) {
- nfc->buf[nfc->buf_index] = buf[i];
- nfc->buf_index++;
- }
- }
-}
-
-static void
-ar934x_nfc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
-{
- struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
- int buf_index;
- int i;
-
- WARN_ON(nfc->buf_index + len > nfc->buf_size);
-
- buf_index = nfc->buf_index;
-
- if (nfc->swap_dma || nfc->read_id) {
- for (i = 0; i < len; i++) {
- buf[i] = nfc->buf[buf_index ^ 3];
- buf_index++;
- }
- } else {
- for (i = 0; i < len; i++) {
- buf[i] = nfc->buf[buf_index];
- buf_index++;
- }
- }
-
- nfc->buf_index = buf_index;
-}
-
-static inline void
-ar934x_nfc_enable_hwecc(struct ar934x_nfc *nfc)
-{
- nfc->ctrl_reg |= AR934X_NFC_CTRL_ECC_EN;
- nfc->ctrl_reg &= ~AR934X_NFC_CTRL_CUSTOM_SIZE_EN;
-}
-
-static inline void
-ar934x_nfc_disable_hwecc(struct ar934x_nfc *nfc)
-{
- nfc->ctrl_reg &= ~AR934X_NFC_CTRL_ECC_EN;
- nfc->ctrl_reg |= AR934X_NFC_CTRL_CUSTOM_SIZE_EN;
-}
-
-static int
-ar934x_nfc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
- int page)
-{
- struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
- int err;
-
- nfc_dbg(nfc, "read_oob: page:%d\n", page);
-
- err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, mtd->writesize, page,
- mtd->oobsize);
- if (err)
- return err;
-
- memcpy(chip->oob_poi, nfc->buf, mtd->oobsize);
-
- return 0;
-}
-
-static int
-ar934x_nfc_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
- int page)
-{
- struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
-
- nfc_dbg(nfc, "write_oob: page:%d\n", page);
-
- memcpy(nfc->buf, chip->oob_poi, mtd->oobsize);
-
- return ar934x_nfc_send_write(nfc, NAND_CMD_PAGEPROG, mtd->writesize,
- page, mtd->oobsize);
-}
-
-static int
-ar934x_nfc_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- u8 *buf, int oob_required, int page)
-{
- struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
- int len;
- int err;
-
- nfc_dbg(nfc, "read_page_raw: page:%d oob:%d\n", page, oob_required);
-
- len = mtd->writesize;
- if (oob_required)
- len += mtd->oobsize;
-
- err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, 0, page, len);
- if (err)
- return err;
-
- memcpy(buf, nfc->buf, mtd->writesize);
-
- if (oob_required)
- memcpy(chip->oob_poi, &nfc->buf[mtd->writesize], mtd->oobsize);
-
- return 0;
-}
-
-static int
-ar934x_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
- u8 *buf, int oob_required, int page)
-{
- struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
- u32 ecc_ctrl;
- int max_bitflips = 0;
- bool ecc_failed;
- bool ecc_corrected;
- int err;
-
- nfc_dbg(nfc, "read_page: page:%d oob:%d\n", page, oob_required);
-
- ar934x_nfc_enable_hwecc(nfc);
- err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, 0, page,
- mtd->writesize);
- ar934x_nfc_disable_hwecc(nfc);
-
- if (err)
- return err;
-
- /* TODO: optimize to avoid memcpy */
- memcpy(buf, nfc->buf, mtd->writesize);
-
- /* read the ECC status */
- ecc_ctrl = ar934x_nfc_rr(nfc, AR934X_NFC_REG_ECC_CTRL);
- ecc_failed = ecc_ctrl & AR934X_NFC_ECC_CTRL_ERR_UNCORRECT;
- ecc_corrected = ecc_ctrl & AR934X_NFC_ECC_CTRL_ERR_CORRECT;
-
- if (oob_required || ecc_failed) {
- err = ar934x_nfc_send_read(nfc, NAND_CMD_READ0, mtd->writesize,
- page, mtd->oobsize);
- if (err)
- return err;
-
- if (oob_required)
- memcpy(chip->oob_poi, nfc->buf, mtd->oobsize);
- }
-
- if (ecc_failed) {
- /*
- * The hardware ECC engine reports uncorrectable errors
- * on empty pages. Check the ECC bytes and the data. If
- * both contains 0xff bytes only, dont report a failure.
- *
- * TODO: prebuild a buffer with 0xff bytes and use memcmp
- * for better performance?
- */
- if (!is_all_ff(&nfc->buf[nfc->ecc_oob_pos], chip->ecc.total) ||
- !is_all_ff(buf, mtd->writesize))
- mtd->ecc_stats.failed++;
- } else if (ecc_corrected) {
- /*
- * The hardware does not report the exact count of the
- * corrected bitflips, use assumptions based on the
- * threshold.
- */
- if (ecc_ctrl & AR934X_NFC_ECC_CTRL_ERR_OVER) {
- /*
- * The number of corrected bitflips exceeds the
- * threshold. Assume the maximum.
- */
- max_bitflips = chip->ecc.strength * chip->ecc.steps;
- } else {
- max_bitflips = nfc->ecc_thres * chip->ecc.steps;
- }
-
- mtd->ecc_stats.corrected += max_bitflips;
- }
-
- return max_bitflips;
-}
-
-static int
-ar934x_nfc_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- const u8 *buf, int oob_required, int page)
-{
- struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
- int len;
-
- nfc_dbg(nfc, "write_page_raw: page:%d oob:%d\n", page, oob_required);
-
- memcpy(nfc->buf, buf, mtd->writesize);
- len = mtd->writesize;
-
- if (oob_required) {
- memcpy(&nfc->buf[mtd->writesize], chip->oob_poi, mtd->oobsize);
- len += mtd->oobsize;
- }
-
- return ar934x_nfc_send_write(nfc, NAND_CMD_PAGEPROG, 0, page, len);
-}
-
-static int
-ar934x_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
- const u8 *buf, int oob_required, int page)
-{
- struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
- int err;
-
- nfc_dbg(nfc, "write_page: page:%d oob:%d\n", page, oob_required);
-
- /* write OOB first */
- if (oob_required &&
- !is_all_ff(chip->oob_poi, mtd->oobsize)) {
- err = ar934x_nfc_write_oob(mtd, chip, page);
- if (err)
- return err;
- }
-
- /* TODO: optimize to avoid memcopy */
- memcpy(nfc->buf, buf, mtd->writesize);
-
- ar934x_nfc_enable_hwecc(nfc);
- err = ar934x_nfc_send_write(nfc, NAND_CMD_PAGEPROG, 0, page,
- mtd->writesize);
- ar934x_nfc_disable_hwecc(nfc);
-
- return err;
-}
-
-static void
-ar934x_nfc_hw_init(struct ar934x_nfc *nfc)
-{
- struct ar934x_nfc_platform_data *pdata;
-
- pdata = ar934x_nfc_get_platform_data(nfc);
- if (pdata->hw_reset) {
- pdata->hw_reset(true);
- pdata->hw_reset(false);
- }
-
- /*
- * setup timings
- * TODO: make it configurable via platform data
- */
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_TIME_SEQ,
- AR934X_NFC_TIME_SEQ_DEFAULT);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_TIMINGS_ASYN,
- AR934X_NFC_TIMINGS_ASYN_DEFAULT);
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_TIMINGS_SYN,
- AR934X_NFC_TIMINGS_SYN_DEFAULT);
-
- /* disable WP on all chips, and select chip 0 */
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_MEM_CTRL, 0xff00);
-
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_DMA_ADDR_OFFS, 0);
-
- /* initialize Control register */
- nfc->ctrl_reg = AR934X_NFC_CTRL_CUSTOM_SIZE_EN;
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg);
-
- if (nfc->small_page) {
- /* Setup generic sequence register for small page reads. */
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_GEN_SEQ_CTRL,
- AR934X_NFC_GENSEQ_SMALL_PAGE_READ);
- }
-}
-
-static void
-ar934x_nfc_restart(struct ar934x_nfc *nfc)
-{
- u32 ctrl_reg;
-
- if (nfc->select_chip)
- nfc->select_chip(-1);
-
- ctrl_reg = nfc->ctrl_reg;
- ar934x_nfc_hw_init(nfc);
- nfc->ctrl_reg = ctrl_reg;
-
- if (nfc->select_chip)
- nfc->select_chip(0);
-
- ar934x_nfc_send_cmd(nfc, NAND_CMD_RESET);
-}
-
-static irqreturn_t
-ar934x_nfc_irq_handler(int irq, void *data)
-{
- struct ar934x_nfc *nfc = data;
- u32 status;
-
- status = ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS);
-
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_INT_STATUS, 0);
- /* flush write */
- ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_STATUS);
-
- status &= ar934x_nfc_rr(nfc, AR934X_NFC_REG_INT_MASK);
- if (status) {
- nfc_dbg(nfc, "got IRQ, status:%08x\n", status);
-
- nfc->irq_status = status;
- nfc->spurious_irq_expected = true;
- wake_up(&nfc->irq_waitq);
- } else {
- if (nfc->spurious_irq_expected) {
- nfc->spurious_irq_expected = false;
- } else {
- dev_warn(nfc->parent, "spurious interrupt\n");
- }
- }
-
- return IRQ_HANDLED;
-}
-
-static int
-ar934x_nfc_init_tail(struct mtd_info *mtd)
-{
- struct ar934x_nfc *nfc = mtd_to_ar934x_nfc(mtd);
- struct nand_chip *chip = &nfc->nand_chip;
- u32 ctrl;
- u32 t;
- int err;
-
- switch (mtd->oobsize) {
- case 16:
- case 64:
- case 128:
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_SPARE_SIZE, mtd->oobsize);
- break;
-
- default:
- dev_err(nfc->parent, "unsupported OOB size: %d bytes\n",
- mtd->oobsize);
- return -ENXIO;
- }
-
- ctrl = AR934X_NFC_CTRL_CUSTOM_SIZE_EN;
-
- switch (mtd->erasesize / mtd->writesize) {
- case 32:
- t = AR934X_NFC_CTRL_BLOCK_SIZE_32;
- break;
-
- case 64:
- t = AR934X_NFC_CTRL_BLOCK_SIZE_64;
- break;
-
- case 128:
- t = AR934X_NFC_CTRL_BLOCK_SIZE_128;
- break;
-
- case 256:
- t = AR934X_NFC_CTRL_BLOCK_SIZE_256;
- break;
-
- default:
- dev_err(nfc->parent, "unsupported block size: %u\n",
- mtd->erasesize / mtd->writesize);
- return -ENXIO;
- }
-
- ctrl |= t << AR934X_NFC_CTRL_BLOCK_SIZE_S;
-
- switch (mtd->writesize) {
- case 256:
- nfc->small_page = 1;
- t = AR934X_NFC_CTRL_PAGE_SIZE_256;
- break;
-
- case 512:
- nfc->small_page = 1;
- t = AR934X_NFC_CTRL_PAGE_SIZE_512;
- break;
-
- case 1024:
- t = AR934X_NFC_CTRL_PAGE_SIZE_1024;
- break;
-
- case 2048:
- t = AR934X_NFC_CTRL_PAGE_SIZE_2048;
- break;
-
- case 4096:
- t = AR934X_NFC_CTRL_PAGE_SIZE_4096;
- break;
-
- case 8192:
- t = AR934X_NFC_CTRL_PAGE_SIZE_8192;
- break;
-
- case 16384:
- t = AR934X_NFC_CTRL_PAGE_SIZE_16384;
- break;
-
- default:
- dev_err(nfc->parent, "unsupported write size: %d bytes\n",
- mtd->writesize);
- return -ENXIO;
- }
-
- ctrl |= t << AR934X_NFC_CTRL_PAGE_SIZE_S;
-
- if (nfc->small_page) {
- ctrl |= AR934X_NFC_CTRL_SMALL_PAGE;
-
- if (chip->chipsize > (32 << 20)) {
- nfc->addr_count0 = 4;
- nfc->addr_count1 = 3;
- } else if (chip->chipsize > (2 << 16)) {
- nfc->addr_count0 = 3;
- nfc->addr_count1 = 2;
- } else {
- nfc->addr_count0 = 2;
- nfc->addr_count1 = 1;
- }
- } else {
- if (chip->chipsize > (128 << 20)) {
- nfc->addr_count0 = 5;
- nfc->addr_count1 = 3;
- } else if (chip->chipsize > (8 << 16)) {
- nfc->addr_count0 = 4;
- nfc->addr_count1 = 2;
- } else {
- nfc->addr_count0 = 3;
- nfc->addr_count1 = 1;
- }
- }
-
- ctrl |= nfc->addr_count0 << AR934X_NFC_CTRL_ADDR_CYCLE0_S;
- ctrl |= nfc->addr_count1 << AR934X_NFC_CTRL_ADDR_CYCLE1_S;
-
- nfc->ctrl_reg = ctrl;
- ar934x_nfc_wr(nfc, AR934X_NFC_REG_CTRL, nfc->ctrl_reg);
-
- ar934x_nfc_free_buf(nfc);
- err = ar934x_nfc_alloc_buf(nfc, mtd->writesize + mtd->oobsize);
-
- return err;
-}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
-static struct nand_ecclayout ar934x_nfc_oob_64_hwecc = {
- .eccbytes = 28,
- .eccpos = {
- 20, 21, 22, 23, 24, 25, 26,
- 27, 28, 29, 30, 31, 32, 33,
- 34, 35, 36, 37, 38, 39, 40,
- 41, 42, 43, 44, 45, 46, 47,
- },
- .oobfree = {
- {
- .offset = 4,
- .length = 16,
- },
- {
- .offset = 48,
- .length = 16,
- },
- },
-};
-
-#else
-
-static int ar934x_nfc_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- if (section)
- return -ERANGE;
-
- oobregion->offset = 20;
- oobregion->length = 28;
-
- return 0;
-}
-
-static int ar934x_nfc_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 4;
- oobregion->length = 16;
- return 0;
- case 1:
- oobregion->offset = 48;
- oobregion->length = 16;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static const struct mtd_ooblayout_ops ar934x_nfc_ecclayout_ops = {
- .ecc = ar934x_nfc_ooblayout_ecc,
- .free = ar934x_nfc_ooblayout_free,
-};
-#endif /* < 4.6 */
-
-static int
-ar934x_nfc_setup_hwecc(struct ar934x_nfc *nfc)
-{
- struct nand_chip *nand = &nfc->nand_chip;
- struct mtd_info *mtd = ar934x_nfc_to_mtd(nfc);
- u32 ecc_cap;
- u32 ecc_thres;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0)
- struct mtd_oob_region oobregion;
-#endif
-
- if (!IS_ENABLED(CONFIG_MTD_NAND_AR934X_HW_ECC)) {
- dev_err(nfc->parent, "hardware ECC support is disabled\n");
- return -EINVAL;
- }
-
- switch (mtd->writesize) {
- case 2048:
- /*
- * Writing a subpage separately is not supported, because
- * the controller only does ECC on full-page accesses.
- */
- nand->options = NAND_NO_SUBPAGE_WRITE;
-
- nand->ecc.size = 512;
- nand->ecc.bytes = 7;
- nand->ecc.strength = 4;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- nand->ecc.layout = &ar934x_nfc_oob_64_hwecc;
-#else
- mtd_set_ooblayout(mtd, &ar934x_nfc_ecclayout_ops);
-#endif
- break;
-
- default:
- dev_err(nfc->parent,
- "hardware ECC is not available for %d byte pages\n",
- mtd->writesize);
- return -EINVAL;
- }
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- BUG_ON(!nand->ecc.layout);
-#else
- BUG_ON(!mtd->ooblayout->ecc);
-#endif
-
- switch (nand->ecc.strength) {
- case 4:
- ecc_cap = AR934X_NFC_ECC_CTRL_ECC_CAP_4;
- ecc_thres = 4;
- break;
-
- default:
- dev_err(nfc->parent, "unsupported ECC strength %u\n",
- nand->ecc.strength);
- return -EINVAL;
- }
-
- nfc->ecc_thres = ecc_thres;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- nfc->ecc_oob_pos = nand->ecc.layout->eccpos[0];
-#else
- mtd->ooblayout->ecc(mtd, 0, &oobregion);
- nfc->ecc_oob_pos = oobregion.offset;
-#endif
-
- nfc->ecc_ctrl_reg = ecc_cap << AR934X_NFC_ECC_CTRL_ECC_CAP_S;
- nfc->ecc_ctrl_reg |= ecc_thres << AR934X_NFC_ECC_CTRL_ERR_THRES_S;
-
- nfc->ecc_offset_reg = mtd->writesize + nfc->ecc_oob_pos;
-
- nand->ecc.mode = NAND_ECC_HW;
- nand->ecc.read_page = ar934x_nfc_read_page;
- nand->ecc.read_page_raw = ar934x_nfc_read_page_raw;
- nand->ecc.write_page = ar934x_nfc_write_page;
- nand->ecc.write_page_raw = ar934x_nfc_write_page_raw;
- nand->ecc.read_oob = ar934x_nfc_read_oob;
- nand->ecc.write_oob = ar934x_nfc_write_oob;
-
- return 0;
-}
-
-static int
-ar934x_nfc_probe(struct platform_device *pdev)
-{
- static const char *part_probes[] = { "cmdlinepart", NULL, };
- struct ar934x_nfc_platform_data *pdata;
- struct ar934x_nfc *nfc;
- struct resource *res;
- struct mtd_info *mtd;
- struct nand_chip *nand;
- struct mtd_part_parser_data ppdata;
- int ret;
-
- pdata = pdev->dev.platform_data;
- if (pdata == NULL) {
- dev_err(&pdev->dev, "no platform data defined\n");
- return -EINVAL;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "failed to get I/O memory\n");
- return -EINVAL;
- }
-
- nfc = devm_kzalloc(&pdev->dev, sizeof(struct ar934x_nfc), GFP_KERNEL);
- if (!nfc) {
- dev_err(&pdev->dev, "failed to allocate driver data\n");
- return -ENOMEM;
- }
-
- nfc->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(nfc->base)) {
- dev_err(&pdev->dev, "failed to remap I/O memory\n");
- return PTR_ERR(nfc->base);
- }
-
- nfc->irq = platform_get_irq(pdev, 0);
- if (nfc->irq < 0) {
- dev_err(&pdev->dev, "no IRQ resource specified\n");
- return -EINVAL;
- }
-
- init_waitqueue_head(&nfc->irq_waitq);
- ret = request_irq(nfc->irq, ar934x_nfc_irq_handler, 0,
- dev_name(&pdev->dev), nfc);
- if (ret) {
- dev_err(&pdev->dev, "requast_irq failed, err:%d\n", ret);
- return ret;
- }
-
- nfc->parent = &pdev->dev;
- nfc->select_chip = pdata->select_chip;
- nfc->swap_dma = pdata->swap_dma;
-
- nand = &nfc->nand_chip;
- mtd = ar934x_nfc_to_mtd(nfc);
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- mtd->priv = nand;
-#endif
- mtd->owner = THIS_MODULE;
- if (pdata->name)
- mtd->name = pdata->name;
- else
- mtd->name = dev_name(&pdev->dev);
-
- nand->chip_delay = 25;
-
- nand->dev_ready = ar934x_nfc_dev_ready;
- nand->cmdfunc = ar934x_nfc_cmdfunc;
- nand->read_byte = ar934x_nfc_read_byte;
- nand->write_buf = ar934x_nfc_write_buf;
- nand->read_buf = ar934x_nfc_read_buf;
- nand->select_chip = ar934x_nfc_select_chip;
-
- ret = ar934x_nfc_alloc_buf(nfc, AR934X_NFC_ID_BUF_SIZE);
- if (ret)
- goto err_free_irq;
-
- platform_set_drvdata(pdev, nfc);
-
- ar934x_nfc_hw_init(nfc);
-
- ret = nand_scan_ident(mtd, 1, NULL);
- if (ret) {
- dev_err(&pdev->dev, "nand_scan_ident failed, err:%d\n", ret);
- goto err_free_buf;
- }
-
- ret = ar934x_nfc_init_tail(mtd);
- if (ret) {
- dev_err(&pdev->dev, "init tail failed, err:%d\n", ret);
- goto err_free_buf;
- }
-
- if (pdata->scan_fixup) {
- ret = pdata->scan_fixup(mtd);
- if (ret)
- goto err_free_buf;
- }
-
- switch (pdata->ecc_mode) {
- case AR934X_NFC_ECC_SOFT:
- nand->ecc.mode = NAND_ECC_SOFT;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0)
- nand->ecc.algo = NAND_ECC_HAMMING;
-#endif
- break;
-
- case AR934X_NFC_ECC_SOFT_BCH:
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- nand->ecc.mode = NAND_ECC_SOFT_BCH;
-#else
- nand->ecc.mode = NAND_ECC_SOFT;
- nand->ecc.algo = NAND_ECC_BCH;
-#endif
- break;
-
- case AR934X_NFC_ECC_HW:
- ret = ar934x_nfc_setup_hwecc(nfc);
- if (ret)
- goto err_free_buf;
-
- break;
-
- default:
- dev_err(nfc->parent, "unknown ECC mode %d\n", pdata->ecc_mode);
- return -EINVAL;
- }
-
- ret = nand_scan_tail(mtd);
- if (ret) {
- dev_err(&pdev->dev, "scan tail failed, err:%d\n", ret);
- goto err_free_buf;
- }
-
- memset(&ppdata, '\0', sizeof(ppdata));
- ret = mtd_device_parse_register(mtd, part_probes, &ppdata,
- pdata->parts, pdata->nr_parts);
- if (ret) {
- dev_err(&pdev->dev, "unable to register mtd, err:%d\n", ret);
- goto err_free_buf;
- }
-
- return 0;
-
-err_free_buf:
- ar934x_nfc_free_buf(nfc);
-err_free_irq:
- free_irq(nfc->irq, nfc);
- return ret;
-}
-
-static int
-ar934x_nfc_remove(struct platform_device *pdev)
-{
- struct ar934x_nfc *nfc;
- struct mtd_info *mtd;
-
- nfc = platform_get_drvdata(pdev);
- if (nfc) {
- mtd = ar934x_nfc_to_mtd(nfc);
- nand_release(&nfc->nand_chip);
- ar934x_nfc_free_buf(nfc);
- free_irq(nfc->irq, nfc);
- }
-
- return 0;
-}
-
-static struct platform_driver ar934x_nfc_driver = {
- .probe = ar934x_nfc_probe,
- .remove = ar934x_nfc_remove,
- .driver = {
- .name = AR934X_NFC_DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-module_platform_driver(ar934x_nfc_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_DESCRIPTION("Atheros AR934x NAND Flash Controller driver");
-MODULE_ALIAS("platform:" AR934X_NFC_DRIVER_NAME);
diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c b/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c
deleted file mode 100644
index 7dde613131..0000000000
--- a/target/linux/ar71xx/files/drivers/mtd/nand/rb4xx_nand.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * NAND flash driver for the MikroTik RouterBoard 4xx series
- *
- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * This file was based on the driver for Linux 2.6.22 published by
- * MikroTik for their RouterBoard 4xx series devices.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/version.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/rb4xx_cpld.h>
-
-#define DRV_NAME "rb4xx-nand"
-#define DRV_VERSION "0.2.0"
-#define DRV_DESC "NAND flash driver for RouterBoard 4xx series"
-
-#define RB4XX_NAND_GPIO_READY 5
-#define RB4XX_NAND_GPIO_ALE 37
-#define RB4XX_NAND_GPIO_CLE 38
-#define RB4XX_NAND_GPIO_NCE 39
-
-struct rb4xx_nand_info {
- struct nand_chip chip;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- struct mtd_info mtd;
-#endif
-};
-
-static inline struct rb4xx_nand_info *mtd_to_rbinfo(struct mtd_info *mtd)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- return container_of(mtd, struct rb4xx_nand_info, mtd);
-#else
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- return container_of(chip, struct rb4xx_nand_info, chip);
-#endif
-}
-
-static struct mtd_info *rbinfo_to_mtd(struct rb4xx_nand_info *nfc)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- return &nfc->mtd;
-#else
- return nand_to_mtd(&nfc->chip);
-#endif
-}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
-/*
- * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
- * will not be able to find the kernel that we load.
- */
-static struct nand_ecclayout rb4xx_nand_ecclayout = {
- .eccbytes = 6,
- .eccpos = { 8, 9, 10, 13, 14, 15 },
- .oobavail = 9,
- .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-#else
-
-static int rb4xx_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 8;
- oobregion->length = 3;
- return 0;
- case 1:
- oobregion->offset = 13;
- oobregion->length = 3;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static int rb4xx_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 0;
- oobregion->length = 4;
- return 0;
- case 1:
- oobregion->offset = 4;
- oobregion->length = 1;
- return 0;
- case 2:
- oobregion->offset = 6;
- oobregion->length = 2;
- return 0;
- case 3:
- oobregion->offset = 11;
- oobregion->length = 2;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static const struct mtd_ooblayout_ops rb4xx_nand_ecclayout_ops = {
- .ecc = rb4xx_ooblayout_ecc,
- .free = rb4xx_ooblayout_free,
-};
-#endif /* < 4.6 */
-
-static struct mtd_partition rb4xx_nand_partitions[] = {
- {
- .name = "booter",
- .offset = 0,
- .size = (256 * 1024),
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "kernel",
- .offset = (256 * 1024),
- .size = (4 * 1024 * 1024) - (256 * 1024),
- },
- {
- .name = "ubi",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static int rb4xx_nand_dev_ready(struct mtd_info *mtd)
-{
- return gpio_get_value_cansleep(RB4XX_NAND_GPIO_READY);
-}
-
-static void rb4xx_nand_write_cmd(unsigned char cmd)
-{
- unsigned char data = cmd;
- int err;
-
- err = rb4xx_cpld_write(&data, 1);
- if (err)
- pr_err("rb4xx_nand: write cmd failed, err=%d\n", err);
-}
-
-static void rb4xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- if (ctrl & NAND_CTRL_CHANGE) {
- gpio_set_value_cansleep(RB4XX_NAND_GPIO_CLE,
- (ctrl & NAND_CLE) ? 1 : 0);
- gpio_set_value_cansleep(RB4XX_NAND_GPIO_ALE,
- (ctrl & NAND_ALE) ? 1 : 0);
- gpio_set_value_cansleep(RB4XX_NAND_GPIO_NCE,
- (ctrl & NAND_NCE) ? 0 : 1);
- }
-
- if (cmd != NAND_CMD_NONE)
- rb4xx_nand_write_cmd(cmd);
-}
-
-static unsigned char rb4xx_nand_read_byte(struct mtd_info *mtd)
-{
- unsigned char data = 0;
- int err;
-
- err = rb4xx_cpld_read(&data, 1);
- if (err) {
- pr_err("rb4xx_nand: read data failed, err=%d\n", err);
- data = 0xff;
- }
-
- return data;
-}
-
-static void rb4xx_nand_write_buf(struct mtd_info *mtd, const unsigned char *buf,
- int len)
-{
- int err;
-
- err = rb4xx_cpld_write(buf, len);
- if (err)
- pr_err("rb4xx_nand: write buf failed, err=%d\n", err);
-}
-
-static void rb4xx_nand_read_buf(struct mtd_info *mtd, unsigned char *buf,
- int len)
-{
- int err;
-
- err = rb4xx_cpld_read(buf, len);
- if (err)
- pr_err("rb4xx_nand: read buf failed, err=%d\n", err);
-}
-
-static int rb4xx_nand_probe(struct platform_device *pdev)
-{
- struct rb4xx_nand_info *info;
- struct mtd_info *mtd;
- int ret;
-
- printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
-
- ret = gpio_request(RB4XX_NAND_GPIO_READY, "NAND RDY");
- if (ret) {
- dev_err(&pdev->dev, "unable to request gpio %d\n",
- RB4XX_NAND_GPIO_READY);
- goto err;
- }
-
- ret = gpio_direction_input(RB4XX_NAND_GPIO_READY);
- if (ret) {
- dev_err(&pdev->dev, "unable to set input mode on gpio %d\n",
- RB4XX_NAND_GPIO_READY);
- goto err_free_gpio_ready;
- }
-
- ret = gpio_request(RB4XX_NAND_GPIO_ALE, "NAND ALE");
- if (ret) {
- dev_err(&pdev->dev, "unable to request gpio %d\n",
- RB4XX_NAND_GPIO_ALE);
- goto err_free_gpio_ready;
- }
-
- ret = gpio_direction_output(RB4XX_NAND_GPIO_ALE, 0);
- if (ret) {
- dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
- RB4XX_NAND_GPIO_ALE);
- goto err_free_gpio_ale;
- }
-
- ret = gpio_request(RB4XX_NAND_GPIO_CLE, "NAND CLE");
- if (ret) {
- dev_err(&pdev->dev, "unable to request gpio %d\n",
- RB4XX_NAND_GPIO_CLE);
- goto err_free_gpio_ale;
- }
-
- ret = gpio_direction_output(RB4XX_NAND_GPIO_CLE, 0);
- if (ret) {
- dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
- RB4XX_NAND_GPIO_CLE);
- goto err_free_gpio_cle;
- }
-
- ret = gpio_request(RB4XX_NAND_GPIO_NCE, "NAND NCE");
- if (ret) {
- dev_err(&pdev->dev, "unable to request gpio %d\n",
- RB4XX_NAND_GPIO_NCE);
- goto err_free_gpio_cle;
- }
-
- ret = gpio_direction_output(RB4XX_NAND_GPIO_NCE, 1);
- if (ret) {
- dev_err(&pdev->dev, "unable to set output mode on gpio %d\n",
- RB4XX_NAND_GPIO_ALE);
- goto err_free_gpio_nce;
- }
-
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info) {
- dev_err(&pdev->dev, "rb4xx-nand: no memory for private data\n");
- ret = -ENOMEM;
- goto err_free_gpio_nce;
- }
-
- info->chip.priv = &info;
- mtd = rbinfo_to_mtd(info);
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- mtd->priv = &info->chip;
-#endif
- mtd->owner = THIS_MODULE;
-
- info->chip.cmd_ctrl = rb4xx_nand_cmd_ctrl;
- info->chip.dev_ready = rb4xx_nand_dev_ready;
- info->chip.read_byte = rb4xx_nand_read_byte;
- info->chip.write_buf = rb4xx_nand_write_buf;
- info->chip.read_buf = rb4xx_nand_read_buf;
-
- info->chip.chip_delay = 25;
- info->chip.ecc.mode = NAND_ECC_SOFT;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0)
- info->chip.ecc.algo = NAND_ECC_HAMMING;
-#endif
- info->chip.options = NAND_NO_SUBPAGE_WRITE;
-
- platform_set_drvdata(pdev, info);
-
- ret = nand_scan_ident(mtd, 1, NULL);
- if (ret) {
- ret = -ENXIO;
- goto err_free_info;
- }
-
- if (mtd->writesize == 512)
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- info->chip.ecc.layout = &rb4xx_nand_ecclayout;
-#else
- mtd_set_ooblayout(mtd, &rb4xx_nand_ecclayout_ops);
-#endif
-
- ret = nand_scan_tail(mtd);
- if (ret) {
- return -ENXIO;
- goto err_set_drvdata;
- }
-
- mtd_device_register(mtd, rb4xx_nand_partitions,
- ARRAY_SIZE(rb4xx_nand_partitions));
- if (ret)
- goto err_release_nand;
-
- return 0;
-
-err_release_nand:
- nand_release(&info->chip);
-err_set_drvdata:
- platform_set_drvdata(pdev, NULL);
-err_free_info:
- kfree(info);
-err_free_gpio_nce:
- gpio_free(RB4XX_NAND_GPIO_NCE);
-err_free_gpio_cle:
- gpio_free(RB4XX_NAND_GPIO_CLE);
-err_free_gpio_ale:
- gpio_free(RB4XX_NAND_GPIO_ALE);
-err_free_gpio_ready:
- gpio_free(RB4XX_NAND_GPIO_READY);
-err:
- return ret;
-}
-
-static int rb4xx_nand_remove(struct platform_device *pdev)
-{
- struct rb4xx_nand_info *info = platform_get_drvdata(pdev);
-
- nand_release(&info->chip);
- platform_set_drvdata(pdev, NULL);
- kfree(info);
- gpio_free(RB4XX_NAND_GPIO_NCE);
- gpio_free(RB4XX_NAND_GPIO_CLE);
- gpio_free(RB4XX_NAND_GPIO_ALE);
- gpio_free(RB4XX_NAND_GPIO_READY);
-
- return 0;
-}
-
-static struct platform_driver rb4xx_nand_driver = {
- .probe = rb4xx_nand_probe,
- .remove = rb4xx_nand_remove,
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init rb4xx_nand_init(void)
-{
- return platform_driver_register(&rb4xx_nand_driver);
-}
-
-static void __exit rb4xx_nand_exit(void)
-{
- platform_driver_unregister(&rb4xx_nand_driver);
-}
-
-module_init(rb4xx_nand_init);
-module_exit(rb4xx_nand_exit);
-
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c b/target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c
deleted file mode 100644
index a578c54ad3..0000000000
--- a/target/linux/ar71xx/files/drivers/mtd/nand/rb750_nand.c
+++ /dev/null
@@ -1,440 +0,0 @@
-/*
- * NAND flash driver for the MikroTik RouterBOARD 750
- *
- * Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/version.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/mach-rb750.h>
-
-#define DRV_NAME "rb750-nand"
-#define DRV_VERSION "0.1.0"
-#define DRV_DESC "NAND flash driver for the RouterBOARD 750"
-
-#define RB750_NAND_IO0 BIT(RB750_GPIO_NAND_IO0)
-#define RB750_NAND_ALE BIT(RB750_GPIO_NAND_ALE)
-#define RB750_NAND_CLE BIT(RB750_GPIO_NAND_CLE)
-#define RB750_NAND_NRE BIT(RB750_GPIO_NAND_NRE)
-#define RB750_NAND_NWE BIT(RB750_GPIO_NAND_NWE)
-#define RB750_NAND_RDY BIT(RB750_GPIO_NAND_RDY)
-
-#define RB750_NAND_DATA_SHIFT 1
-#define RB750_NAND_DATA_BITS (0xff << RB750_NAND_DATA_SHIFT)
-#define RB750_NAND_INPUT_BITS (RB750_NAND_DATA_BITS | RB750_NAND_RDY)
-#define RB750_NAND_OUTPUT_BITS (RB750_NAND_ALE | RB750_NAND_CLE | \
- RB750_NAND_NRE | RB750_NAND_NWE)
-
-struct rb750_nand_info {
- struct nand_chip chip;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- struct mtd_info mtd;
-#endif
- struct rb7xx_nand_platform_data *pdata;
-};
-
-static inline struct rb750_nand_info *mtd_to_rbinfo(struct mtd_info *mtd)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- return container_of(mtd, struct rb750_nand_info, mtd);
-#else
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- return container_of(chip, struct rb750_nand_info, chip);
-#endif
-}
-
-static struct mtd_info *rbinfo_to_mtd(struct rb750_nand_info *nfc)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- return &nfc->mtd;
-#else
- return nand_to_mtd(&nfc->chip);
-#endif
-}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
-/*
- * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
- * will not be able to find the kernel that we load.
- */
-static struct nand_ecclayout rb750_nand_ecclayout = {
- .eccbytes = 6,
- .eccpos = { 8, 9, 10, 13, 14, 15 },
- .oobavail = 9,
- .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-#else
-
-static int rb750_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 8;
- oobregion->length = 3;
- return 0;
- case 1:
- oobregion->offset = 13;
- oobregion->length = 3;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static int rb750_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 0;
- oobregion->length = 4;
- return 0;
- case 1:
- oobregion->offset = 4;
- oobregion->length = 1;
- return 0;
- case 2:
- oobregion->offset = 6;
- oobregion->length = 2;
- return 0;
- case 3:
- oobregion->offset = 11;
- oobregion->length = 2;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static const struct mtd_ooblayout_ops rb750_nand_ecclayout_ops = {
- .ecc = rb750_ooblayout_ecc,
- .free = rb750_ooblayout_free,
-};
-#endif /* < 4.6 */
-
-static struct mtd_partition rb750_nand_partitions[] = {
- {
- .name = "booter",
- .offset = 0,
- .size = (256 * 1024),
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = (256 * 1024),
- .size = (4 * 1024 * 1024) - (256 * 1024),
- }, {
- .name = "ubi",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static void rb750_nand_write(const u8 *buf, unsigned len)
-{
- void __iomem *base = ath79_gpio_base;
- u32 out;
- u32 t;
- unsigned i;
-
- /* set data lines to output mode */
- t = __raw_readl(base + AR71XX_GPIO_REG_OE);
- __raw_writel(t | RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
-
- out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
- out &= ~(RB750_NAND_DATA_BITS | RB750_NAND_NWE);
- for (i = 0; i != len; i++) {
- u32 data;
-
- data = buf[i];
- data <<= RB750_NAND_DATA_SHIFT;
- data |= out;
- __raw_writel(data, base + AR71XX_GPIO_REG_OUT);
-
- __raw_writel(data | RB750_NAND_NWE, base + AR71XX_GPIO_REG_OUT);
- /* flush write */
- __raw_readl(base + AR71XX_GPIO_REG_OUT);
- }
-
- /* set data lines to input mode */
- t = __raw_readl(base + AR71XX_GPIO_REG_OE);
- __raw_writel(t & ~RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
- /* flush write */
- __raw_readl(base + AR71XX_GPIO_REG_OE);
-}
-
-static void rb750_nand_read(u8 *read_buf, unsigned len)
-{
- void __iomem *base = ath79_gpio_base;
- unsigned i;
-
- for (i = 0; i < len; i++) {
- u8 data;
-
- /* activate RE line */
- __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_CLEAR);
- /* flush write */
- __raw_readl(base + AR71XX_GPIO_REG_CLEAR);
-
- /* read input lines */
- data = __raw_readl(base + AR71XX_GPIO_REG_IN) >>
- RB750_NAND_DATA_SHIFT;
-
- /* deactivate RE line */
- __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_SET);
-
- read_buf[i] = data;
- }
-}
-
-static void rb750_nand_select_chip(struct mtd_info *mtd, int chip)
-{
- struct rb750_nand_info *rbinfo = mtd_to_rbinfo(mtd);
- void __iomem *base = ath79_gpio_base;
- u32 t;
-
- if (chip >= 0) {
- rbinfo->pdata->enable_pins();
-
- /* set input mode for data lines */
- t = __raw_readl(base + AR71XX_GPIO_REG_OE);
- __raw_writel(t & ~RB750_NAND_INPUT_BITS,
- base + AR71XX_GPIO_REG_OE);
-
- /* deactivate RE and WE lines */
- __raw_writel(RB750_NAND_NRE | RB750_NAND_NWE,
- base + AR71XX_GPIO_REG_SET);
- /* flush write */
- (void) __raw_readl(base + AR71XX_GPIO_REG_SET);
-
- /* activate CE line */
- __raw_writel(rbinfo->pdata->nce_line,
- base + AR71XX_GPIO_REG_CLEAR);
- } else {
- /* deactivate CE line */
- __raw_writel(rbinfo->pdata->nce_line,
- base + AR71XX_GPIO_REG_SET);
- /* flush write */
- (void) __raw_readl(base + AR71XX_GPIO_REG_SET);
-
- t = __raw_readl(base + AR71XX_GPIO_REG_OE);
- __raw_writel(t | RB750_NAND_IO0 | RB750_NAND_RDY,
- base + AR71XX_GPIO_REG_OE);
-
- rbinfo->pdata->disable_pins();
- }
-}
-
-static int rb750_nand_dev_ready(struct mtd_info *mtd)
-{
- void __iomem *base = ath79_gpio_base;
-
- return !!(__raw_readl(base + AR71XX_GPIO_REG_IN) & RB750_NAND_RDY);
-}
-
-static void rb750_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- if (ctrl & NAND_CTRL_CHANGE) {
- void __iomem *base = ath79_gpio_base;
- u32 t;
-
- t = __raw_readl(base + AR71XX_GPIO_REG_OUT);
-
- t &= ~(RB750_NAND_CLE | RB750_NAND_ALE);
- t |= (ctrl & NAND_CLE) ? RB750_NAND_CLE : 0;
- t |= (ctrl & NAND_ALE) ? RB750_NAND_ALE : 0;
-
- __raw_writel(t, base + AR71XX_GPIO_REG_OUT);
- /* flush write */
- __raw_readl(base + AR71XX_GPIO_REG_OUT);
- }
-
- if (cmd != NAND_CMD_NONE) {
- u8 t = cmd;
- rb750_nand_write(&t, 1);
- }
-}
-
-static u8 rb750_nand_read_byte(struct mtd_info *mtd)
-{
- u8 data = 0;
- rb750_nand_read(&data, 1);
- return data;
-}
-
-static void rb750_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
-{
- rb750_nand_read(buf, len);
-}
-
-static void rb750_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
-{
- rb750_nand_write(buf, len);
-}
-
-static void __init rb750_nand_gpio_init(struct rb750_nand_info *info)
-{
- void __iomem *base = ath79_gpio_base;
- u32 out;
- u32 t;
-
- out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
-
- /* setup output levels */
- __raw_writel(RB750_NAND_NCE | RB750_NAND_NRE | RB750_NAND_NWE,
- base + AR71XX_GPIO_REG_SET);
-
- __raw_writel(RB750_NAND_ALE | RB750_NAND_CLE,
- base + AR71XX_GPIO_REG_CLEAR);
-
- /* setup input lines */
- t = __raw_readl(base + AR71XX_GPIO_REG_OE);
- __raw_writel(t & ~(RB750_NAND_INPUT_BITS), base + AR71XX_GPIO_REG_OE);
-
- /* setup output lines */
- t = __raw_readl(base + AR71XX_GPIO_REG_OE);
- t |= RB750_NAND_OUTPUT_BITS;
- t |= info->pdata->nce_line;
- __raw_writel(t, base + AR71XX_GPIO_REG_OE);
-
- info->pdata->latch_change(~out & RB750_NAND_IO0, out & RB750_NAND_IO0);
-}
-
-static int rb750_nand_probe(struct platform_device *pdev)
-{
- struct rb750_nand_info *info;
- struct rb7xx_nand_platform_data *pdata;
- struct mtd_info *mtd;
- int ret;
-
- printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
-
- pdata = pdev->dev.platform_data;
- if (!pdata)
- return -EINVAL;
-
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- return -ENOMEM;
-
- info->chip.priv = &info;
-
- mtd = rbinfo_to_mtd(info);
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- mtd->priv = &info->chip;
-#endif
- mtd->owner = THIS_MODULE;
-
- info->chip.select_chip = rb750_nand_select_chip;
- info->chip.cmd_ctrl = rb750_nand_cmd_ctrl;
- info->chip.dev_ready = rb750_nand_dev_ready;
- info->chip.read_byte = rb750_nand_read_byte;
- info->chip.write_buf = rb750_nand_write_buf;
- info->chip.read_buf = rb750_nand_read_buf;
-
- info->chip.chip_delay = 25;
- info->chip.ecc.mode = NAND_ECC_SOFT;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0)
- info->chip.ecc.algo = NAND_ECC_HAMMING;
-#endif
- info->chip.options = NAND_NO_SUBPAGE_WRITE;
-
- info->pdata = pdata;
-
- platform_set_drvdata(pdev, info);
-
- rb750_nand_gpio_init(info);
-
- ret = nand_scan_ident(mtd, 1, NULL);
- if (ret) {
- ret = -ENXIO;
- goto err_free_info;
- }
-
- if (mtd->writesize == 512)
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- info->chip.ecc.layout = &rb750_nand_ecclayout;
-#else
- mtd_set_ooblayout(mtd, &rb750_nand_ecclayout_ops);
-#endif
-
- ret = nand_scan_tail(mtd);
- if (ret) {
- return -ENXIO;
- goto err_set_drvdata;
- }
-
- ret = mtd_device_register(mtd, rb750_nand_partitions,
- ARRAY_SIZE(rb750_nand_partitions));
- if (ret)
- goto err_release_nand;
-
- return 0;
-
-err_release_nand:
- nand_release(&info->chip);
-err_set_drvdata:
- platform_set_drvdata(pdev, NULL);
-err_free_info:
- kfree(info);
- return ret;
-}
-
-static int rb750_nand_remove(struct platform_device *pdev)
-{
- struct rb750_nand_info *info = platform_get_drvdata(pdev);
-
- nand_release(&info->chip);
- platform_set_drvdata(pdev, NULL);
- kfree(info);
-
- return 0;
-}
-
-static struct platform_driver rb750_nand_driver = {
- .probe = rb750_nand_probe,
- .remove = rb750_nand_remove,
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init rb750_nand_init(void)
-{
- return platform_driver_register(&rb750_nand_driver);
-}
-
-static void __exit rb750_nand_exit(void)
-{
- platform_driver_unregister(&rb750_nand_driver);
-}
-
-module_init(rb750_nand_init);
-module_exit(rb750_nand_exit);
-
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c b/target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c
deleted file mode 100644
index 94e709b7e4..0000000000
--- a/target/linux/ar71xx/files/drivers/mtd/nand/rb91x_nand.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * NAND flash driver for the MikroTik RouterBOARD 91x series
- *
- * Copyright (C) 2013-2014 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/version.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
-#include <linux/mtd/nand.h>
-#else
-#include <linux/mtd/rawnand.h>
-#endif
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/rb91x_nand.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#define DRV_DESC "NAND flash driver for the RouterBOARD 91x series"
-
-#define RB91X_NAND_NRWE BIT(12)
-
-#define RB91X_NAND_DATA_BITS (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) |\
- BIT(13) | BIT(14) | BIT(15))
-
-#define RB91X_NAND_INPUT_BITS (RB91X_NAND_DATA_BITS | RB91X_NAND_RDY)
-#define RB91X_NAND_OUTPUT_BITS (RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE)
-
-#define RB91X_NAND_LOW_DATA_MASK 0x1f
-#define RB91X_NAND_HIGH_DATA_MASK 0xe0
-#define RB91X_NAND_HIGH_DATA_SHIFT 8
-
-struct rb91x_nand_info {
- struct nand_chip chip;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- struct mtd_info mtd;
-#endif
- struct device *dev;
-
- int gpio_nce;
- int gpio_ale;
- int gpio_cle;
- int gpio_rdy;
- int gpio_read;
- int gpio_nrw;
- int gpio_nle;
-};
-
-static inline struct rb91x_nand_info *mtd_to_rbinfo(struct mtd_info *mtd)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- return container_of(mtd, struct rb91x_nand_info, mtd);
-#else
- struct nand_chip *chip = mtd_to_nand(mtd);
-
- return container_of(chip, struct rb91x_nand_info, chip);
-#endif
-}
-
-static struct mtd_info *rbinfo_to_mtd(struct rb91x_nand_info *nfc)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- return &nfc->mtd;
-#else
- return nand_to_mtd(&nfc->chip);
-#endif
-}
-
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
-/*
- * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
- * will not be able to find the kernel that we load.
- */
-static struct nand_ecclayout rb91x_nand_ecclayout = {
- .eccbytes = 6,
- .eccpos = { 8, 9, 10, 13, 14, 15 },
- .oobavail = 9,
- .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-#else
-
-static int rb91x_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 8;
- oobregion->length = 3;
- return 0;
- case 1:
- oobregion->offset = 13;
- oobregion->length = 3;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static int rb91x_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *oobregion)
-{
- switch (section) {
- case 0:
- oobregion->offset = 0;
- oobregion->length = 4;
- return 0;
- case 1:
- oobregion->offset = 4;
- oobregion->length = 1;
- return 0;
- case 2:
- oobregion->offset = 6;
- oobregion->length = 2;
- return 0;
- case 3:
- oobregion->offset = 11;
- oobregion->length = 2;
- return 0;
- default:
- return -ERANGE;
- }
-}
-
-static const struct mtd_ooblayout_ops rb91x_nand_ecclayout_ops = {
- .ecc = rb91x_ooblayout_ecc,
- .free = rb91x_ooblayout_free,
-};
-#endif /* < 4.6 */
-
-static struct mtd_partition rb91x_nand_partitions[] = {
- {
- .name = "booter",
- .offset = 0,
- .size = (256 * 1024),
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "kernel",
- .offset = (256 * 1024),
- .size = (4 * 1024 * 1024) - (256 * 1024),
- }, {
- .name = "ubi",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static void rb91x_nand_write(struct rb91x_nand_info *rbni,
- const u8 *buf,
- unsigned len)
-{
- void __iomem *base = ath79_gpio_base;
- u32 oe_reg;
- u32 out_reg;
- u32 out;
- unsigned i;
-
- /* enable the latch */
- gpio_set_value_cansleep(rbni->gpio_nle, 0);
-
- oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
- out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
-
- /* set data lines to output mode */
- __raw_writel(oe_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE),
- base + AR71XX_GPIO_REG_OE);
-
- out = out_reg & ~(RB91X_NAND_DATA_BITS | RB91X_NAND_NRWE);
- for (i = 0; i != len; i++) {
- u32 data;
-
- data = (buf[i] & RB91X_NAND_HIGH_DATA_MASK) <<
- RB91X_NAND_HIGH_DATA_SHIFT;
- data |= buf[i] & RB91X_NAND_LOW_DATA_MASK;
- data |= out;
- __raw_writel(data, base + AR71XX_GPIO_REG_OUT);
-
- /* deactivate WE line */
- data |= RB91X_NAND_NRWE;
- __raw_writel(data, base + AR71XX_GPIO_REG_OUT);
- /* flush write */
- __raw_readl(base + AR71XX_GPIO_REG_OUT);
- }
-
- /* restore registers */
- __raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
- __raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
- /* flush write */
- __raw_readl(base + AR71XX_GPIO_REG_OUT);
-
- /* disable the latch */
- gpio_set_value_cansleep(rbni->gpio_nle, 1);
-}
-
-static void rb91x_nand_read(struct rb91x_nand_info *rbni,
- u8 *read_buf,
- unsigned len)
-{
- void __iomem *base = ath79_gpio_base;
- u32 oe_reg;
- u32 out_reg;
- unsigned i;
-
- /* enable read mode */
- gpio_set_value_cansleep(rbni->gpio_read, 1);
-
- /* enable latch */
- gpio_set_value_cansleep(rbni->gpio_nle, 0);
-
- /* save registers */
- oe_reg = __raw_readl(base + AR71XX_GPIO_REG_OE);
- out_reg = __raw_readl(base + AR71XX_GPIO_REG_OUT);
-
- /* set data lines to input mode */
- __raw_writel(oe_reg | RB91X_NAND_DATA_BITS,
- base + AR71XX_GPIO_REG_OE);
-
- for (i = 0; i < len; i++) {
- u32 in;
- u8 data;
-
- /* activate RE line */
- __raw_writel(RB91X_NAND_NRWE, base + AR71XX_GPIO_REG_CLEAR);
- /* flush write */
- __raw_readl(base + AR71XX_GPIO_REG_CLEAR);
-
- /* read input lines */
- in = __raw_readl(base + AR71XX_GPIO_REG_IN);
-
- /* deactivate RE line */
- __raw_writel(RB91X_NAND_NRWE, base + AR71XX_GPIO_REG_SET);
-
- data = (in & RB91X_NAND_LOW_DATA_MASK);
- data |= (in >> RB91X_NAND_HIGH_DATA_SHIFT) &
- RB91X_NAND_HIGH_DATA_MASK;
-
- read_buf[i] = data;
- }
-
- /* restore registers */
- __raw_writel(out_reg, base + AR71XX_GPIO_REG_OUT);
- __raw_writel(oe_reg, base + AR71XX_GPIO_REG_OE);
- /* flush write */
- __raw_readl(base + AR71XX_GPIO_REG_OUT);
-
- /* disable latch */
- gpio_set_value_cansleep(rbni->gpio_nle, 1);
-
- /* disable read mode */
- gpio_set_value_cansleep(rbni->gpio_read, 0);
-}
-
-static int rb91x_nand_dev_ready(struct mtd_info *mtd)
-{
- struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
-
- return gpio_get_value_cansleep(rbni->gpio_rdy);
-}
-
-static void rb91x_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
-
- if (ctrl & NAND_CTRL_CHANGE) {
- gpio_set_value_cansleep(rbni->gpio_cle,
- (ctrl & NAND_CLE) ? 1 : 0);
- gpio_set_value_cansleep(rbni->gpio_ale,
- (ctrl & NAND_ALE) ? 1 : 0);
- gpio_set_value_cansleep(rbni->gpio_nce,
- (ctrl & NAND_NCE) ? 0 : 1);
- }
-
- if (cmd != NAND_CMD_NONE) {
- u8 t = cmd;
-
- rb91x_nand_write(rbni, &t, 1);
- }
-}
-
-static u8 rb91x_nand_read_byte(struct mtd_info *mtd)
-{
- struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
- u8 data = 0xff;
-
- rb91x_nand_read(rbni, &data, 1);
-
- return data;
-}
-
-static void rb91x_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
-{
- struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
-
- rb91x_nand_read(rbni, buf, len);
-}
-
-static void rb91x_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
-{
- struct rb91x_nand_info *rbni = mtd_to_rbinfo(mtd);
-
- rb91x_nand_write(rbni, buf, len);
-}
-
-static int rb91x_nand_gpio_init(struct rb91x_nand_info *info)
-{
- int ret;
-
- /*
- * Ensure that the LATCH is disabled before initializing
- * control lines.
- */
- ret = devm_gpio_request_one(info->dev, info->gpio_nle,
- GPIOF_OUT_INIT_HIGH, "LATCH enable");
- if (ret)
- return ret;
-
- ret = devm_gpio_request_one(info->dev, info->gpio_nce,
- GPIOF_OUT_INIT_HIGH, "NAND nCE");
- if (ret)
- return ret;
-
- ret = devm_gpio_request_one(info->dev, info->gpio_nrw,
- GPIOF_OUT_INIT_HIGH, "NAND nRW");
- if (ret)
- return ret;
-
- ret = devm_gpio_request_one(info->dev, info->gpio_cle,
- GPIOF_OUT_INIT_LOW, "NAND CLE");
- if (ret)
- return ret;
-
- ret = devm_gpio_request_one(info->dev, info->gpio_ale,
- GPIOF_OUT_INIT_LOW, "NAND ALE");
- if (ret)
- return ret;
-
- ret = devm_gpio_request_one(info->dev, info->gpio_read,
- GPIOF_OUT_INIT_LOW, "NAND READ");
- if (ret)
- return ret;
-
- ret = devm_gpio_request_one(info->dev, info->gpio_rdy,
- GPIOF_IN, "NAND RDY");
- return ret;
-}
-
-static int rb91x_nand_probe(struct platform_device *pdev)
-{
- struct rb91x_nand_info *rbni;
- struct rb91x_nand_platform_data *pdata;
- struct mtd_info *mtd;
- int ret;
-
- pr_info(DRV_DESC "\n");
-
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata)
- return -EINVAL;
-
- rbni = devm_kzalloc(&pdev->dev, sizeof(*rbni), GFP_KERNEL);
- if (!rbni)
- return -ENOMEM;
-
- rbni->dev = &pdev->dev;
- rbni->gpio_nce = pdata->gpio_nce;
- rbni->gpio_ale = pdata->gpio_ale;
- rbni->gpio_cle = pdata->gpio_cle;
- rbni->gpio_read = pdata->gpio_read;
- rbni->gpio_nrw = pdata->gpio_nrw;
- rbni->gpio_rdy = pdata->gpio_rdy;
- rbni->gpio_nle = pdata->gpio_nle;
-
- rbni->chip.priv = &rbni;
- mtd = rbinfo_to_mtd(rbni);
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- mtd->priv = &rbni->chip;
-#endif
- mtd->owner = THIS_MODULE;
-
- rbni->chip.cmd_ctrl = rb91x_nand_cmd_ctrl;
- rbni->chip.dev_ready = rb91x_nand_dev_ready;
- rbni->chip.read_byte = rb91x_nand_read_byte;
- rbni->chip.write_buf = rb91x_nand_write_buf;
- rbni->chip.read_buf = rb91x_nand_read_buf;
-
- rbni->chip.chip_delay = 25;
- rbni->chip.ecc.mode = NAND_ECC_SOFT;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,6,0)
- rbni->chip.ecc.algo = NAND_ECC_HAMMING;
-#endif
- rbni->chip.options = NAND_NO_SUBPAGE_WRITE;
-
- platform_set_drvdata(pdev, rbni);
-
- ret = rb91x_nand_gpio_init(rbni);
- if (ret)
- return ret;
-
- ret = nand_scan_ident(mtd, 1, NULL);
- if (ret)
- return ret;
-
- if (mtd->writesize == 512)
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,6,0)
- rbni->chip.ecc.layout = &rb91x_nand_ecclayout;
-#else
- mtd_set_ooblayout(mtd, &rb91x_nand_ecclayout_ops);
-#endif
-
- ret = nand_scan_tail(mtd);
- if (ret)
- return ret;
-
- ret = mtd_device_register(mtd, rb91x_nand_partitions,
- ARRAY_SIZE(rb91x_nand_partitions));
- if (ret)
- goto err_release_nand;
-
- return 0;
-
-err_release_nand:
- nand_release(&rbni->chip);
- return ret;
-}
-
-static int rb91x_nand_remove(struct platform_device *pdev)
-{
- struct rb91x_nand_info *info = platform_get_drvdata(pdev);
-
- nand_release(&info->chip);
-
- return 0;
-}
-
-static struct platform_driver rb91x_nand_driver = {
- .probe = rb91x_nand_probe,
- .remove = rb91x_nand_remove,
- .driver = {
- .name = RB91X_NAND_DRIVER_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-module_platform_driver(rb91x_nand_driver);
-
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/files/drivers/mtd/tplinkpart.c b/target/linux/ar71xx/files/drivers/mtd/tplinkpart.c
deleted file mode 100644
index 1b94163b83..0000000000
--- a/target/linux/ar71xx/files/drivers/mtd/tplinkpart.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/magic.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/version.h>
-
-#define TPLINK_NUM_PARTS 5
-#define TPLINK_HEADER_V1 0x01000000
-#define TPLINK_HEADER_V2 0x02000000
-#define MD5SUM_LEN 16
-
-#define TPLINK_ART_LEN 0x10000
-#define TPLINK_KERNEL_OFFS 0x20000
-#define TPLINK_64K_KERNEL_OFFS 0x10000
-
-struct tplink_fw_header {
- uint32_t version; /* header version */
- char vendor_name[24];
- char fw_version[36];
- uint32_t hw_id; /* hardware id */
- uint32_t hw_rev; /* hardware revision */
- uint32_t unk1;
- uint8_t md5sum1[MD5SUM_LEN];
- uint32_t unk2;
- uint8_t md5sum2[MD5SUM_LEN];
- uint32_t unk3;
- uint32_t kernel_la; /* kernel load address */
- uint32_t kernel_ep; /* kernel entry point */
- uint32_t fw_length; /* total length of the firmware */
- uint32_t kernel_ofs; /* kernel data offset */
- uint32_t kernel_len; /* kernel data length */
- uint32_t rootfs_ofs; /* rootfs data offset */
- uint32_t rootfs_len; /* rootfs data length */
- uint32_t boot_ofs; /* bootloader data offset */
- uint32_t boot_len; /* bootloader data length */
- uint8_t pad[360];
-} __attribute__ ((packed));
-
-static struct tplink_fw_header *
-tplink_read_header(struct mtd_info *mtd, size_t offset)
-{
- struct tplink_fw_header *header;
- size_t header_len;
- size_t retlen;
- int ret;
- u32 t;
-
- header = vmalloc(sizeof(*header));
- if (!header)
- goto err;
-
- header_len = sizeof(struct tplink_fw_header);
- ret = mtd_read(mtd, offset, header_len, &retlen,
- (unsigned char *) header);
- if (ret)
- goto err_free_header;
-
- if (retlen != header_len)
- goto err_free_header;
-
- /* sanity checks */
- t = be32_to_cpu(header->version);
- if ((t != TPLINK_HEADER_V1) && (t != TPLINK_HEADER_V2))
- goto err_free_header;
-
- t = be32_to_cpu(header->kernel_ofs);
- if (t != header_len)
- goto err_free_header;
-
- return header;
-
-err_free_header:
- vfree(header);
-err:
- return NULL;
-}
-
-static int tplink_check_rootfs_magic(struct mtd_info *mtd, size_t offset)
-{
- u32 magic;
- size_t retlen;
- int ret;
-
- ret = mtd_read(mtd, offset, sizeof(magic), &retlen,
- (unsigned char *) &magic);
- if (ret)
- return ret;
-
- if (retlen != sizeof(magic))
- return -EIO;
-
- if (le32_to_cpu(magic) != SQUASHFS_MAGIC &&
- magic != 0x19852003)
- return -EINVAL;
-
- return 0;
-}
-
-static int tplink_parse_partitions_offset(struct mtd_info *master,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- struct mtd_partition **pparts,
-#else
- const struct mtd_partition **pparts,
-#endif
- struct mtd_part_parser_data *data,
- size_t offset)
-{
- struct mtd_partition *parts;
- struct tplink_fw_header *header;
- int nr_parts;
- size_t art_offset;
- size_t rootfs_offset;
- size_t squashfs_offset;
- int ret;
-
- nr_parts = TPLINK_NUM_PARTS;
- parts = kzalloc(nr_parts * sizeof(struct mtd_partition), GFP_KERNEL);
- if (!parts) {
- ret = -ENOMEM;
- goto err;
- }
-
- header = tplink_read_header(master, offset);
- if (!header) {
- pr_notice("%s: no TP-Link header found\n", master->name);
- ret = -ENODEV;
- goto err_free_parts;
- }
-
- squashfs_offset = offset + sizeof(struct tplink_fw_header) +
- be32_to_cpu(header->kernel_len);
-
- ret = tplink_check_rootfs_magic(master, squashfs_offset);
- if (ret == 0)
- rootfs_offset = squashfs_offset;
- else
- rootfs_offset = offset + be32_to_cpu(header->rootfs_ofs);
-
- art_offset = master->size - TPLINK_ART_LEN;
-
- parts[0].name = "u-boot";
- parts[0].offset = 0;
- parts[0].size = offset;
- parts[0].mask_flags = MTD_WRITEABLE;
-
- parts[1].name = "kernel";
- parts[1].offset = offset;
- parts[1].size = rootfs_offset - offset;
-
- parts[2].name = "rootfs";
- parts[2].offset = rootfs_offset;
- parts[2].size = art_offset - rootfs_offset;
-
- parts[3].name = "art";
- parts[3].offset = art_offset;
- parts[3].size = TPLINK_ART_LEN;
- parts[3].mask_flags = MTD_WRITEABLE;
-
- parts[4].name = "firmware";
- parts[4].offset = offset;
- parts[4].size = art_offset - offset;
-
- vfree(header);
-
- *pparts = parts;
- return nr_parts;
-
-err_free_parts:
- kfree(parts);
-err:
- *pparts = NULL;
- return ret;
-}
-
-static int tplink_parse_partitions(struct mtd_info *master,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- struct mtd_partition **pparts,
-#else
- const struct mtd_partition **pparts,
-#endif
- struct mtd_part_parser_data *data)
-{
- return tplink_parse_partitions_offset(master, pparts, data,
- TPLINK_KERNEL_OFFS);
-}
-
-static int tplink_parse_64k_partitions(struct mtd_info *master,
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- struct mtd_partition **pparts,
-#else
- const struct mtd_partition **pparts,
-#endif
- struct mtd_part_parser_data *data)
-{
- return tplink_parse_partitions_offset(master, pparts, data,
- TPLINK_64K_KERNEL_OFFS);
-}
-
-static struct mtd_part_parser tplink_parser = {
- .owner = THIS_MODULE,
- .parse_fn = tplink_parse_partitions,
- .name = "tp-link",
-};
-
-static struct mtd_part_parser tplink_64k_parser = {
- .owner = THIS_MODULE,
- .parse_fn = tplink_parse_64k_partitions,
- .name = "tp-link-64k",
-};
-
-static int __init tplink_parser_init(void)
-{
- register_mtd_parser(&tplink_parser);
- register_mtd_parser(&tplink_64k_parser);
-
- return 0;
-}
-
-module_init(tplink_parser_init);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
diff --git a/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c b/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c
deleted file mode 100644
index 71ecd61c80..0000000000
--- a/target/linux/ar71xx/files/drivers/net/dsa/mv88e6063.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * net/dsa/mv88e6063.c - Driver for Marvell 88e6063 switch chips
- * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This driver was base on: net/dsa/mv88e6060.c
- * net/dsa/mv88e6063.c - Driver for Marvell 88e6060 switch chips
- * Copyright (c) 2008-2009 Marvell Semiconductor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/version.h>
-#include <linux/list.h>
-#include <linux/netdevice.h>
-#include <linux/phy.h>
-#include <net/dsa.h>
-#include <linux/version.h>
-
-#define REG_BASE 0x10
-#define REG_PHY(p) (REG_BASE + (p))
-#define REG_PORT(p) (REG_BASE + 8 + (p))
-#define REG_GLOBAL (REG_BASE + 0x0f)
-#define NUM_PORTS 7
-
-static int reg_read(struct dsa_switch *ds, int addr, int reg)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
- return mdiobus_read(bus, addr, reg);
-#else
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev);
- return mdiobus_read(bus, addr, reg);
-#endif
-}
-
-#define REG_READ(addr, reg) \
- ({ \
- int __ret; \
- \
- __ret = reg_read(ds, addr, reg); \
- if (__ret < 0) \
- return __ret; \
- __ret; \
- })
-
-
-static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->master_dev);
- return mdiobus_write(bus, addr, reg, val);
-#else
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(ds->dev);
- return mdiobus_write(bus, addr, reg, val);
-#endif
-}
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,8,0)
-static enum dsa_tag_protocol mv88e6063_get_tag_protocol(struct dsa_switch *ds)
-{
- return DSA_TAG_PROTO_TRAILER;
-}
-#endif
-
-#define REG_WRITE(addr, reg, val) \
- ({ \
- int __ret; \
- \
- __ret = reg_write(ds, addr, reg, val); \
- if (__ret < 0) \
- return __ret; \
- })
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
-static char *mv88e6063_drv_probe(struct device *host_dev, int sw_addr)
-#else
-static const char *mv88e6063_drv_probe(struct device *dsa_dev,
- struct device *host_dev, int sw_addr,
- void **_priv)
-#endif
-{
- struct mii_bus *bus = dsa_host_dev_to_mii_bus(host_dev);
- int ret;
-
- if (!bus)
- return NULL;
-
- ret = mdiobus_read(bus, REG_PORT(0), 0x03);
- if (ret >= 0) {
- ret &= 0xfff0;
- if (ret == 0x1530)
- return "Marvell 88E6063";
- }
-
- return NULL;
-}
-
-static int mv88e6063_switch_reset(struct dsa_switch *ds)
-{
- int i;
- int ret;
-
- /*
- * Set all ports to the disabled state.
- */
- for (i = 0; i < NUM_PORTS; i++) {
- ret = REG_READ(REG_PORT(i), 0x04);
- REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
- }
-
- /*
- * Wait for transmit queues to drain.
- */
- msleep(2);
-
- /*
- * Reset the switch.
- */
- REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
-
- /*
- * Wait up to one second for reset to complete.
- */
- for (i = 0; i < 1000; i++) {
- ret = REG_READ(REG_GLOBAL, 0x00);
- if ((ret & 0x8000) == 0x0000)
- break;
-
- msleep(1);
- }
- if (i == 1000)
- return -ETIMEDOUT;
-
- return 0;
-}
-
-static int mv88e6063_setup_global(struct dsa_switch *ds)
-{
- /*
- * Disable discarding of frames with excessive collisions,
- * set the maximum frame size to 1536 bytes, and mask all
- * interrupt sources.
- */
- REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
-
- /*
- * Enable automatic address learning, set the address
- * database size to 1024 entries, and set the default aging
- * time to 5 minutes.
- */
- REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
-
- return 0;
-}
-
-static int mv88e6063_setup_port(struct dsa_switch *ds, int p)
-{
- int addr = REG_PORT(p);
-
- /*
- * Do not force flow control, disable Ingress and Egress
- * Header tagging, disable VLAN tunneling, and set the port
- * state to Forwarding. Additionally, if this is the CPU
- * port, enable Ingress and Egress Trailer tagging mode.
- */
- REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003);
-
- /*
- * Port based VLAN map: give each port its own address
- * database, allow the CPU port to talk to each of the 'real'
- * ports, and allow each of the 'real' ports to only talk to
- * the CPU port.
- */
- REG_WRITE(addr, 0x06,
- ((p & 0xf) << 12) |
- (dsa_is_cpu_port(ds, p) ?
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)
- ds->phys_port_mask :
-#else
- ds->enabled_port_mask :
-#endif
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
- (1 << ds->dst->cpu_port)));
-#else
- (1 << ds->dst->cpu_dp->index)));
-#endif
-
- /*
- * Port Association Vector: when learning source addresses
- * of packets, add the address to the address database using
- * a port bitmap that has only the bit for this port set and
- * the other bits clear.
- */
- REG_WRITE(addr, 0x0b, 1 << p);
-
- return 0;
-}
-
-static int mv88e6063_setup(struct dsa_switch *ds)
-{
- int i;
- int ret;
-
- ret = mv88e6063_switch_reset(ds);
- if (ret < 0)
- return ret;
-
- /* @@@ initialise atu */
-
- ret = mv88e6063_setup_global(ds);
- if (ret < 0)
- return ret;
-
- for (i = 0; i < NUM_PORTS; i++) {
- ret = mv88e6063_setup_port(ds, i);
- if (ret < 0)
- return ret;
- }
-
- return 0;
-}
-
-static int mv88e6063_set_addr(struct dsa_switch *ds, u8 *addr)
-{
- REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
- REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
- REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
-
- return 0;
-}
-
-static int mv88e6063_port_to_phy_addr(int port)
-{
- if (port >= 0 && port <= NUM_PORTS)
- return REG_PHY(port);
- return -1;
-}
-
-static int mv88e6063_phy_read(struct dsa_switch *ds, int port, int regnum)
-{
- int addr;
-
- addr = mv88e6063_port_to_phy_addr(port);
- if (addr == -1)
- return 0xffff;
-
- return reg_read(ds, addr, regnum);
-}
-
-static int
-mv88e6063_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
-{
- int addr;
-
- addr = mv88e6063_port_to_phy_addr(port);
- if (addr == -1)
- return 0xffff;
-
- return reg_write(ds, addr, regnum, val);
-}
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,9,0)
-static struct dsa_switch_driver mv88e6063_switch_ops = {
-#else
-static struct dsa_switch_ops mv88e6063_switch_ops = {
-#endif
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,8,0)
- .tag_protocol = htons(ETH_P_TRAILER),
-#else
- .get_tag_protocol = mv88e6063_get_tag_protocol,
-#endif
- .probe = mv88e6063_drv_probe,
- .setup = mv88e6063_setup,
- .set_addr = mv88e6063_set_addr,
- .phy_read = mv88e6063_phy_read,
- .phy_write = mv88e6063_phy_write,
-};
-
-#if LINUX_VERSION_CODE > KERNEL_VERSION(4,13,0)
-static struct dsa_switch_driver mv88e6063_switch_drv = {
- .ops = &mv88e6063_switch_ops,
-};
-#endif
-
-static int __init mv88e6063_init(void)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
- register_switch_driver(&mv88e6063_switch_ops);
-#else
- register_switch_driver(&mv88e6063_switch_drv);
-#endif
- return 0;
-}
-module_init(mv88e6063_init);
-
-static void __exit mv88e6063_cleanup(void)
-{
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
- unregister_switch_driver(&mv88e6063_switch_ops);
-#else
- unregister_switch_driver(&mv88e6063_switch_drv);
-#endif
-}
-module_exit(mv88e6063_cleanup);
diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Kconfig b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Kconfig
deleted file mode 100644
index 42d544f731..0000000000
--- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Kconfig
+++ /dev/null
@@ -1,33 +0,0 @@
-config AG71XX
- tristate "Atheros AR7XXX/AR9XXX built-in ethernet mac support"
- depends on ATH79
- select PHYLIB
- help
- If you wish to compile a kernel for AR7XXX/91XXX and enable
- ethernet support, then you should always answer Y to this.
-
-if AG71XX
-
-config AG71XX_DEBUG
- bool "Atheros AR71xx built-in ethernet driver debugging"
- default n
- help
- Atheros AR71xx built-in ethernet driver debugging messages.
-
-config AG71XX_DEBUG_FS
- bool "Atheros AR71xx built-in ethernet driver debugfs support"
- depends on DEBUG_FS
- default n
- help
- Say Y, if you need access to various statistics provided by
- the ag71xx driver.
-
-config AG71XX_AR8216_SUPPORT
- bool "special support for the Atheros AR8216 switch"
- default n
- default y if ATH79_MACH_WNR2000 || ATH79_MACH_MZK_W04NU
- help
- Say 'y' here if you want to enable special support for the
- Atheros AR8216 switch found on some boards.
-
-endif
diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Makefile b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Makefile
deleted file mode 100644
index b3ec4084c8..0000000000
--- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/Makefile
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# Makefile for the Atheros AR71xx built-in ethernet macs
-#
-
-ag71xx-y += ag71xx_main.o
-ag71xx-y += ag71xx_ethtool.o
-ag71xx-y += ag71xx_phy.o
-ag71xx-y += ag71xx_mdio.o
-ag71xx-y += ag71xx_ar7240.o
-
-ag71xx-$(CONFIG_AG71XX_DEBUG_FS) += ag71xx_debugfs.o
-ag71xx-$(CONFIG_AG71XX_AR8216_SUPPORT) += ag71xx_ar8216.o
-
-obj-$(CONFIG_AG71XX) += ag71xx.o
-
diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx.h b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx.h
deleted file mode 100644
index 2d9a865043..0000000000
--- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx.h
+++ /dev/null
@@ -1,508 +0,0 @@
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __AG71XX_H
-#define __AG71XX_H
-
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/random.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/ethtool.h>
-#include <linux/etherdevice.h>
-#include <linux/if_vlan.h>
-#include <linux/phy.h>
-#include <linux/skbuff.h>
-#include <linux/dma-mapping.h>
-#include <linux/workqueue.h>
-
-#include <linux/bitops.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-#include <asm/mach-ath79/ag71xx_platform.h>
-
-#define AG71XX_DRV_NAME "ag71xx"
-#define AG71XX_DRV_VERSION "0.5.35"
-
-/*
- * For our NAPI weight bigger does *NOT* mean better - it means more
- * D-cache misses and lots more wasted cycles than we'll ever
- * possibly gain from saving instructions.
- */
-#define AG71XX_NAPI_WEIGHT 32
-#define AG71XX_OOM_REFILL (1 + HZ/10)
-
-#define AG71XX_INT_ERR (AG71XX_INT_RX_BE | AG71XX_INT_TX_BE)
-#define AG71XX_INT_TX (AG71XX_INT_TX_PS)
-#define AG71XX_INT_RX (AG71XX_INT_RX_PR | AG71XX_INT_RX_OF)
-
-#define AG71XX_INT_POLL (AG71XX_INT_RX | AG71XX_INT_TX)
-#define AG71XX_INT_INIT (AG71XX_INT_ERR | AG71XX_INT_POLL)
-
-#define AG71XX_TX_MTU_LEN 1540
-
-#define AG71XX_TX_RING_SPLIT 512
-#define AG71XX_TX_RING_DS_PER_PKT DIV_ROUND_UP(AG71XX_TX_MTU_LEN, \
- AG71XX_TX_RING_SPLIT)
-#define AG71XX_TX_RING_SIZE_DEFAULT 128
-#define AG71XX_RX_RING_SIZE_DEFAULT 256
-
-#define AG71XX_TX_RING_SIZE_MAX 128
-#define AG71XX_RX_RING_SIZE_MAX 256
-
-#define QCA955X_SGMII_LINK_WAR_MAX_TRY 10
-
-#ifdef CONFIG_AG71XX_DEBUG
-#define DBG(fmt, args...) pr_debug(fmt, ## args)
-#else
-#define DBG(fmt, args...) do {} while (0)
-#endif
-
-#define ag71xx_assert(_cond) \
-do { \
- if (_cond) \
- break; \
- printk("%s,%d: assertion failed\n", __FILE__, __LINE__); \
- BUG(); \
-} while (0)
-
-struct ag71xx_desc {
- u32 data;
- u32 ctrl;
-#define DESC_EMPTY BIT(31)
-#define DESC_MORE BIT(24)
-#define DESC_PKTLEN_M 0xfff
- u32 next;
- u32 pad;
-} __attribute__((aligned(4)));
-
-#define AG71XX_DESC_SIZE roundup(sizeof(struct ag71xx_desc), \
- L1_CACHE_BYTES)
-
-struct ag71xx_buf {
- union {
- struct sk_buff *skb;
- void *rx_buf;
- };
- union {
- dma_addr_t dma_addr;
- unsigned int len;
- };
-};
-
-struct ag71xx_ring {
- struct ag71xx_buf *buf;
- u8 *descs_cpu;
- dma_addr_t descs_dma;
- u16 desc_split;
- u16 order;
- unsigned int curr;
- unsigned int dirty;
-};
-
-struct ag71xx_mdio {
- struct mii_bus *mii_bus;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- int mii_irq[PHY_MAX_ADDR];
-#endif
- void __iomem *mdio_base;
- struct ag71xx_mdio_platform_data *pdata;
-};
-
-struct ag71xx_int_stats {
- unsigned long rx_pr;
- unsigned long rx_be;
- unsigned long rx_of;
- unsigned long tx_ps;
- unsigned long tx_be;
- unsigned long tx_ur;
- unsigned long total;
-};
-
-struct ag71xx_napi_stats {
- unsigned long napi_calls;
- unsigned long rx_count;
- unsigned long rx_packets;
- unsigned long rx_packets_max;
- unsigned long tx_count;
- unsigned long tx_packets;
- unsigned long tx_packets_max;
-
- unsigned long rx[AG71XX_NAPI_WEIGHT + 1];
- unsigned long tx[AG71XX_NAPI_WEIGHT + 1];
-};
-
-struct ag71xx_debug {
- struct dentry *debugfs_dir;
-
- struct ag71xx_int_stats int_stats;
- struct ag71xx_napi_stats napi_stats;
-};
-
-struct ag71xx {
- /*
- * Critical data related to the per-packet data path are clustered
- * early in this structure to help improve the D-cache footprint.
- */
- struct ag71xx_ring rx_ring ____cacheline_aligned;
- struct ag71xx_ring tx_ring ____cacheline_aligned;
-
- unsigned int max_frame_len;
- unsigned int desc_pktlen_mask;
- unsigned int rx_buf_size;
-
- struct net_device *dev;
- struct platform_device *pdev;
- spinlock_t lock;
- struct napi_struct napi;
- u32 msg_enable;
-
- /*
- * From this point onwards we're not looking at per-packet fields.
- */
- void __iomem *mac_base;
-
- struct ag71xx_desc *stop_desc;
- dma_addr_t stop_desc_dma;
-
- struct mii_bus *mii_bus;
- struct phy_device *phy_dev;
- void *phy_priv;
-
- unsigned int link;
- unsigned int speed;
- int duplex;
-
- struct delayed_work restart_work;
- struct delayed_work link_work;
- struct timer_list oom_timer;
-
-#ifdef CONFIG_AG71XX_DEBUG_FS
- struct ag71xx_debug debug;
-#endif
-};
-
-extern struct ethtool_ops ag71xx_ethtool_ops;
-void ag71xx_link_adjust(struct ag71xx *ag);
-
-int ag71xx_mdio_driver_init(void) __init;
-void ag71xx_mdio_driver_exit(void);
-
-int ag71xx_phy_connect(struct ag71xx *ag);
-void ag71xx_phy_disconnect(struct ag71xx *ag);
-void ag71xx_phy_start(struct ag71xx *ag);
-void ag71xx_phy_stop(struct ag71xx *ag);
-
-static inline struct ag71xx_platform_data *ag71xx_get_pdata(struct ag71xx *ag)
-{
- return ag->pdev->dev.platform_data;
-}
-
-static inline int ag71xx_desc_empty(struct ag71xx_desc *desc)
-{
- return (desc->ctrl & DESC_EMPTY) != 0;
-}
-
-static inline struct ag71xx_desc *
-ag71xx_ring_desc(struct ag71xx_ring *ring, int idx)
-{
- return (struct ag71xx_desc *) &ring->descs_cpu[idx * AG71XX_DESC_SIZE];
-}
-
-static inline int
-ag71xx_ring_size_order(int size)
-{
- return fls(size - 1);
-}
-
-/* Register offsets */
-#define AG71XX_REG_MAC_CFG1 0x0000
-#define AG71XX_REG_MAC_CFG2 0x0004
-#define AG71XX_REG_MAC_IPG 0x0008
-#define AG71XX_REG_MAC_HDX 0x000c
-#define AG71XX_REG_MAC_MFL 0x0010
-#define AG71XX_REG_MII_CFG 0x0020
-#define AG71XX_REG_MII_CMD 0x0024
-#define AG71XX_REG_MII_ADDR 0x0028
-#define AG71XX_REG_MII_CTRL 0x002c
-#define AG71XX_REG_MII_STATUS 0x0030
-#define AG71XX_REG_MII_IND 0x0034
-#define AG71XX_REG_MAC_IFCTL 0x0038
-#define AG71XX_REG_MAC_ADDR1 0x0040
-#define AG71XX_REG_MAC_ADDR2 0x0044
-#define AG71XX_REG_FIFO_CFG0 0x0048
-#define AG71XX_REG_FIFO_CFG1 0x004c
-#define AG71XX_REG_FIFO_CFG2 0x0050
-#define AG71XX_REG_FIFO_CFG3 0x0054
-#define AG71XX_REG_FIFO_CFG4 0x0058
-#define AG71XX_REG_FIFO_CFG5 0x005c
-#define AG71XX_REG_FIFO_RAM0 0x0060
-#define AG71XX_REG_FIFO_RAM1 0x0064
-#define AG71XX_REG_FIFO_RAM2 0x0068
-#define AG71XX_REG_FIFO_RAM3 0x006c
-#define AG71XX_REG_FIFO_RAM4 0x0070
-#define AG71XX_REG_FIFO_RAM5 0x0074
-#define AG71XX_REG_FIFO_RAM6 0x0078
-#define AG71XX_REG_FIFO_RAM7 0x007c
-
-#define AG71XX_REG_TX_CTRL 0x0180
-#define AG71XX_REG_TX_DESC 0x0184
-#define AG71XX_REG_TX_STATUS 0x0188
-#define AG71XX_REG_RX_CTRL 0x018c
-#define AG71XX_REG_RX_DESC 0x0190
-#define AG71XX_REG_RX_STATUS 0x0194
-#define AG71XX_REG_INT_ENABLE 0x0198
-#define AG71XX_REG_INT_STATUS 0x019c
-
-#define AG71XX_REG_FIFO_DEPTH 0x01a8
-#define AG71XX_REG_RX_SM 0x01b0
-#define AG71XX_REG_TX_SM 0x01b4
-
-#define MAC_CFG1_TXE BIT(0) /* Tx Enable */
-#define MAC_CFG1_STX BIT(1) /* Synchronize Tx Enable */
-#define MAC_CFG1_RXE BIT(2) /* Rx Enable */
-#define MAC_CFG1_SRX BIT(3) /* Synchronize Rx Enable */
-#define MAC_CFG1_TFC BIT(4) /* Tx Flow Control Enable */
-#define MAC_CFG1_RFC BIT(5) /* Rx Flow Control Enable */
-#define MAC_CFG1_LB BIT(8) /* Loopback mode */
-#define MAC_CFG1_SR BIT(31) /* Soft Reset */
-
-#define MAC_CFG2_FDX BIT(0)
-#define MAC_CFG2_CRC_EN BIT(1)
-#define MAC_CFG2_PAD_CRC_EN BIT(2)
-#define MAC_CFG2_LEN_CHECK BIT(4)
-#define MAC_CFG2_HUGE_FRAME_EN BIT(5)
-#define MAC_CFG2_IF_1000 BIT(9)
-#define MAC_CFG2_IF_10_100 BIT(8)
-
-#define FIFO_CFG0_WTM BIT(0) /* Watermark Module */
-#define FIFO_CFG0_RXS BIT(1) /* Rx System Module */
-#define FIFO_CFG0_RXF BIT(2) /* Rx Fabric Module */
-#define FIFO_CFG0_TXS BIT(3) /* Tx System Module */
-#define FIFO_CFG0_TXF BIT(4) /* Tx Fabric Module */
-#define FIFO_CFG0_ALL (FIFO_CFG0_WTM | FIFO_CFG0_RXS | FIFO_CFG0_RXF \
- | FIFO_CFG0_TXS | FIFO_CFG0_TXF)
-
-#define FIFO_CFG0_ENABLE_SHIFT 8
-
-#define FIFO_CFG4_DE BIT(0) /* Drop Event */
-#define FIFO_CFG4_DV BIT(1) /* RX_DV Event */
-#define FIFO_CFG4_FC BIT(2) /* False Carrier */
-#define FIFO_CFG4_CE BIT(3) /* Code Error */
-#define FIFO_CFG4_CR BIT(4) /* CRC error */
-#define FIFO_CFG4_LM BIT(5) /* Length Mismatch */
-#define FIFO_CFG4_LO BIT(6) /* Length out of range */
-#define FIFO_CFG4_OK BIT(7) /* Packet is OK */
-#define FIFO_CFG4_MC BIT(8) /* Multicast Packet */
-#define FIFO_CFG4_BC BIT(9) /* Broadcast Packet */
-#define FIFO_CFG4_DR BIT(10) /* Dribble */
-#define FIFO_CFG4_LE BIT(11) /* Long Event */
-#define FIFO_CFG4_CF BIT(12) /* Control Frame */
-#define FIFO_CFG4_PF BIT(13) /* Pause Frame */
-#define FIFO_CFG4_UO BIT(14) /* Unsupported Opcode */
-#define FIFO_CFG4_VT BIT(15) /* VLAN tag detected */
-#define FIFO_CFG4_FT BIT(16) /* Frame Truncated */
-#define FIFO_CFG4_UC BIT(17) /* Unicast Packet */
-
-#define FIFO_CFG5_DE BIT(0) /* Drop Event */
-#define FIFO_CFG5_DV BIT(1) /* RX_DV Event */
-#define FIFO_CFG5_FC BIT(2) /* False Carrier */
-#define FIFO_CFG5_CE BIT(3) /* Code Error */
-#define FIFO_CFG5_LM BIT(4) /* Length Mismatch */
-#define FIFO_CFG5_LO BIT(5) /* Length Out of Range */
-#define FIFO_CFG5_OK BIT(6) /* Packet is OK */
-#define FIFO_CFG5_MC BIT(7) /* Multicast Packet */
-#define FIFO_CFG5_BC BIT(8) /* Broadcast Packet */
-#define FIFO_CFG5_DR BIT(9) /* Dribble */
-#define FIFO_CFG5_CF BIT(10) /* Control Frame */
-#define FIFO_CFG5_PF BIT(11) /* Pause Frame */
-#define FIFO_CFG5_UO BIT(12) /* Unsupported Opcode */
-#define FIFO_CFG5_VT BIT(13) /* VLAN tag detected */
-#define FIFO_CFG5_LE BIT(14) /* Long Event */
-#define FIFO_CFG5_FT BIT(15) /* Frame Truncated */
-#define FIFO_CFG5_16 BIT(16) /* unknown */
-#define FIFO_CFG5_17 BIT(17) /* unknown */
-#define FIFO_CFG5_SF BIT(18) /* Short Frame */
-#define FIFO_CFG5_BM BIT(19) /* Byte Mode */
-
-#define AG71XX_INT_TX_PS BIT(0)
-#define AG71XX_INT_TX_UR BIT(1)
-#define AG71XX_INT_TX_BE BIT(3)
-#define AG71XX_INT_RX_PR BIT(4)
-#define AG71XX_INT_RX_OF BIT(6)
-#define AG71XX_INT_RX_BE BIT(7)
-
-#define MAC_IFCTL_SPEED BIT(16)
-
-#define MII_CFG_CLK_DIV_4 0
-#define MII_CFG_CLK_DIV_6 2
-#define MII_CFG_CLK_DIV_8 3
-#define MII_CFG_CLK_DIV_10 4
-#define MII_CFG_CLK_DIV_14 5
-#define MII_CFG_CLK_DIV_20 6
-#define MII_CFG_CLK_DIV_28 7
-#define MII_CFG_CLK_DIV_34 8
-#define MII_CFG_CLK_DIV_42 9
-#define MII_CFG_CLK_DIV_50 10
-#define MII_CFG_CLK_DIV_58 11
-#define MII_CFG_CLK_DIV_66 12
-#define MII_CFG_CLK_DIV_74 13
-#define MII_CFG_CLK_DIV_82 14
-#define MII_CFG_CLK_DIV_98 15
-#define MII_CFG_RESET BIT(31)
-
-#define MII_CMD_WRITE 0x0
-#define MII_CMD_READ 0x1
-#define MII_ADDR_SHIFT 8
-#define MII_IND_BUSY BIT(0)
-#define MII_IND_INVALID BIT(2)
-
-#define TX_CTRL_TXE BIT(0) /* Tx Enable */
-
-#define TX_STATUS_PS BIT(0) /* Packet Sent */
-#define TX_STATUS_UR BIT(1) /* Tx Underrun */
-#define TX_STATUS_BE BIT(3) /* Bus Error */
-
-#define RX_CTRL_RXE BIT(0) /* Rx Enable */
-
-#define RX_STATUS_PR BIT(0) /* Packet Received */
-#define RX_STATUS_OF BIT(2) /* Rx Overflow */
-#define RX_STATUS_BE BIT(3) /* Bus Error */
-
-static inline void ag71xx_check_reg_offset(struct ag71xx *ag, unsigned reg)
-{
- switch (reg) {
- case AG71XX_REG_MAC_CFG1 ... AG71XX_REG_MAC_MFL:
- case AG71XX_REG_MAC_IFCTL ... AG71XX_REG_TX_SM:
- case AG71XX_REG_MII_CFG:
- break;
-
- default:
- BUG();
- }
-}
-
-static inline void ag71xx_wr(struct ag71xx *ag, unsigned reg, u32 value)
-{
- ag71xx_check_reg_offset(ag, reg);
-
- __raw_writel(value, ag->mac_base + reg);
- /* flush write */
- (void) __raw_readl(ag->mac_base + reg);
-}
-
-static inline u32 ag71xx_rr(struct ag71xx *ag, unsigned reg)
-{
- ag71xx_check_reg_offset(ag, reg);
-
- return __raw_readl(ag->mac_base + reg);
-}
-
-static inline void ag71xx_sb(struct ag71xx *ag, unsigned reg, u32 mask)
-{
- void __iomem *r;
-
- ag71xx_check_reg_offset(ag, reg);
-
- r = ag->mac_base + reg;
- __raw_writel(__raw_readl(r) | mask, r);
- /* flush write */
- (void)__raw_readl(r);
-}
-
-static inline void ag71xx_cb(struct ag71xx *ag, unsigned reg, u32 mask)
-{
- void __iomem *r;
-
- ag71xx_check_reg_offset(ag, reg);
-
- r = ag->mac_base + reg;
- __raw_writel(__raw_readl(r) & ~mask, r);
- /* flush write */
- (void) __raw_readl(r);
-}
-
-static inline void ag71xx_int_enable(struct ag71xx *ag, u32 ints)
-{
- ag71xx_sb(ag, AG71XX_REG_INT_ENABLE, ints);
-}
-
-static inline void ag71xx_int_disable(struct ag71xx *ag, u32 ints)
-{
- ag71xx_cb(ag, AG71XX_REG_INT_ENABLE, ints);
-}
-
-#ifdef CONFIG_AG71XX_AR8216_SUPPORT
-void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb);
-int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
- int pktlen);
-static inline int ag71xx_has_ar8216(struct ag71xx *ag)
-{
- return ag71xx_get_pdata(ag)->has_ar8216;
-}
-#else
-static inline void ag71xx_add_ar8216_header(struct ag71xx *ag,
- struct sk_buff *skb)
-{
-}
-
-static inline int ag71xx_remove_ar8216_header(struct ag71xx *ag,
- struct sk_buff *skb,
- int pktlen)
-{
- return 0;
-}
-static inline int ag71xx_has_ar8216(struct ag71xx *ag)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_AG71XX_DEBUG_FS
-int ag71xx_debugfs_root_init(void);
-void ag71xx_debugfs_root_exit(void);
-int ag71xx_debugfs_init(struct ag71xx *ag);
-void ag71xx_debugfs_exit(struct ag71xx *ag);
-void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status);
-void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx);
-#else
-static inline int ag71xx_debugfs_root_init(void) { return 0; }
-static inline void ag71xx_debugfs_root_exit(void) {}
-static inline int ag71xx_debugfs_init(struct ag71xx *ag) { return 0; }
-static inline void ag71xx_debugfs_exit(struct ag71xx *ag) {}
-static inline void ag71xx_debugfs_update_int_stats(struct ag71xx *ag,
- u32 status) {}
-static inline void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag,
- int rx, int tx) {}
-#endif /* CONFIG_AG71XX_DEBUG_FS */
-
-void ag71xx_ar7240_start(struct ag71xx *ag);
-void ag71xx_ar7240_stop(struct ag71xx *ag);
-int ag71xx_ar7240_init(struct ag71xx *ag);
-void ag71xx_ar7240_cleanup(struct ag71xx *ag);
-
-int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg);
-void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val);
-
-u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr,
- unsigned reg_addr);
-int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr,
- unsigned reg_addr, u16 reg_val);
-
-#endif /* _AG71XX_H */
diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c
deleted file mode 100644
index 2859c0dbe1..0000000000
--- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar7240.c
+++ /dev/null
@@ -1,1386 +0,0 @@
-/*
- * Driver for the built-in ethernet switch of the Atheros AR7240 SoC
- * Copyright (c) 2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (c) 2010 Felix Fietkau <nbd@nbd.name>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/etherdevice.h>
-#include <linux/list.h>
-#include <linux/netdevice.h>
-#include <linux/phy.h>
-#include <linux/mii.h>
-#include <linux/bitops.h>
-#include <linux/switch.h>
-#include "ag71xx.h"
-
-#define BITM(_count) (BIT(_count) - 1)
-#define BITS(_shift, _count) (BITM(_count) << _shift)
-
-#define AR7240_REG_MASK_CTRL 0x00
-#define AR7240_MASK_CTRL_REVISION_M BITM(8)
-#define AR7240_MASK_CTRL_VERSION_M BITM(8)
-#define AR7240_MASK_CTRL_VERSION_S 8
-#define AR7240_MASK_CTRL_VERSION_AR7240 0x01
-#define AR7240_MASK_CTRL_VERSION_AR934X 0x02
-#define AR7240_MASK_CTRL_SOFT_RESET BIT(31)
-
-#define AR7240_REG_MAC_ADDR0 0x20
-#define AR7240_REG_MAC_ADDR1 0x24
-
-#define AR7240_REG_FLOOD_MASK 0x2c
-#define AR7240_FLOOD_MASK_BROAD_TO_CPU BIT(26)
-
-#define AR7240_REG_GLOBAL_CTRL 0x30
-#define AR7240_GLOBAL_CTRL_MTU_M BITM(11)
-#define AR9340_GLOBAL_CTRL_MTU_M BITM(14)
-
-#define AR7240_REG_VTU 0x0040
-#define AR7240_VTU_OP BITM(3)
-#define AR7240_VTU_OP_NOOP 0x0
-#define AR7240_VTU_OP_FLUSH 0x1
-#define AR7240_VTU_OP_LOAD 0x2
-#define AR7240_VTU_OP_PURGE 0x3
-#define AR7240_VTU_OP_REMOVE_PORT 0x4
-#define AR7240_VTU_ACTIVE BIT(3)
-#define AR7240_VTU_FULL BIT(4)
-#define AR7240_VTU_PORT BITS(8, 4)
-#define AR7240_VTU_PORT_S 8
-#define AR7240_VTU_VID BITS(16, 12)
-#define AR7240_VTU_VID_S 16
-#define AR7240_VTU_PRIO BITS(28, 3)
-#define AR7240_VTU_PRIO_S 28
-#define AR7240_VTU_PRIO_EN BIT(31)
-
-#define AR7240_REG_VTU_DATA 0x0044
-#define AR7240_VTUDATA_MEMBER BITS(0, 10)
-#define AR7240_VTUDATA_VALID BIT(11)
-
-#define AR7240_REG_ATU 0x50
-#define AR7240_ATU_FLUSH_ALL 0x1
-
-#define AR7240_REG_AT_CTRL 0x5c
-#define AR7240_AT_CTRL_AGE_TIME BITS(0, 15)
-#define AR7240_AT_CTRL_AGE_EN BIT(17)
-#define AR7240_AT_CTRL_LEARN_CHANGE BIT(18)
-#define AR7240_AT_CTRL_RESERVED BIT(19)
-#define AR7240_AT_CTRL_ARP_EN BIT(20)
-
-#define AR7240_REG_TAG_PRIORITY 0x70
-
-#define AR7240_REG_SERVICE_TAG 0x74
-#define AR7240_SERVICE_TAG_M BITM(16)
-
-#define AR7240_REG_CPU_PORT 0x78
-#define AR7240_MIRROR_PORT_S 4
-#define AR7240_MIRROR_PORT_M BITM(4)
-#define AR7240_CPU_PORT_EN BIT(8)
-
-#define AR7240_REG_MIB_FUNCTION0 0x80
-#define AR7240_MIB_TIMER_M BITM(16)
-#define AR7240_MIB_AT_HALF_EN BIT(16)
-#define AR7240_MIB_BUSY BIT(17)
-#define AR7240_MIB_FUNC_S 24
-#define AR7240_MIB_FUNC_M BITM(3)
-#define AR7240_MIB_FUNC_NO_OP 0x0
-#define AR7240_MIB_FUNC_FLUSH 0x1
-#define AR7240_MIB_FUNC_CAPTURE 0x3
-
-#define AR7240_REG_MDIO_CTRL 0x98
-#define AR7240_MDIO_CTRL_DATA_M BITM(16)
-#define AR7240_MDIO_CTRL_REG_ADDR_S 16
-#define AR7240_MDIO_CTRL_PHY_ADDR_S 21
-#define AR7240_MDIO_CTRL_CMD_WRITE 0
-#define AR7240_MDIO_CTRL_CMD_READ BIT(27)
-#define AR7240_MDIO_CTRL_MASTER_EN BIT(30)
-#define AR7240_MDIO_CTRL_BUSY BIT(31)
-
-#define AR7240_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100)
-
-#define AR7240_REG_PORT_STATUS(_port) (AR7240_REG_PORT_BASE((_port)) + 0x00)
-#define AR7240_PORT_STATUS_SPEED_S 0
-#define AR7240_PORT_STATUS_SPEED_M BITM(2)
-#define AR7240_PORT_STATUS_SPEED_10 0
-#define AR7240_PORT_STATUS_SPEED_100 1
-#define AR7240_PORT_STATUS_SPEED_1000 2
-#define AR7240_PORT_STATUS_TXMAC BIT(2)
-#define AR7240_PORT_STATUS_RXMAC BIT(3)
-#define AR7240_PORT_STATUS_TXFLOW BIT(4)
-#define AR7240_PORT_STATUS_RXFLOW BIT(5)
-#define AR7240_PORT_STATUS_DUPLEX BIT(6)
-#define AR7240_PORT_STATUS_LINK_UP BIT(8)
-#define AR7240_PORT_STATUS_LINK_AUTO BIT(9)
-#define AR7240_PORT_STATUS_LINK_PAUSE BIT(10)
-
-#define AR7240_REG_PORT_CTRL(_port) (AR7240_REG_PORT_BASE((_port)) + 0x04)
-#define AR7240_PORT_CTRL_STATE_M BITM(3)
-#define AR7240_PORT_CTRL_STATE_DISABLED 0
-#define AR7240_PORT_CTRL_STATE_BLOCK 1
-#define AR7240_PORT_CTRL_STATE_LISTEN 2
-#define AR7240_PORT_CTRL_STATE_LEARN 3
-#define AR7240_PORT_CTRL_STATE_FORWARD 4
-#define AR7240_PORT_CTRL_LEARN_LOCK BIT(7)
-#define AR7240_PORT_CTRL_VLAN_MODE_S 8
-#define AR7240_PORT_CTRL_VLAN_MODE_KEEP 0
-#define AR7240_PORT_CTRL_VLAN_MODE_STRIP 1
-#define AR7240_PORT_CTRL_VLAN_MODE_ADD 2
-#define AR7240_PORT_CTRL_VLAN_MODE_DOUBLE_TAG 3
-#define AR7240_PORT_CTRL_IGMP_SNOOP BIT(10)
-#define AR7240_PORT_CTRL_HEADER BIT(11)
-#define AR7240_PORT_CTRL_MAC_LOOP BIT(12)
-#define AR7240_PORT_CTRL_SINGLE_VLAN BIT(13)
-#define AR7240_PORT_CTRL_LEARN BIT(14)
-#define AR7240_PORT_CTRL_DOUBLE_TAG BIT(15)
-#define AR7240_PORT_CTRL_MIRROR_TX BIT(16)
-#define AR7240_PORT_CTRL_MIRROR_RX BIT(17)
-
-#define AR7240_REG_PORT_VLAN(_port) (AR7240_REG_PORT_BASE((_port)) + 0x08)
-
-#define AR7240_PORT_VLAN_DEFAULT_ID_S 0
-#define AR7240_PORT_VLAN_DEST_PORTS_S 16
-#define AR7240_PORT_VLAN_MODE_S 30
-#define AR7240_PORT_VLAN_MODE_PORT_ONLY 0
-#define AR7240_PORT_VLAN_MODE_PORT_FALLBACK 1
-#define AR7240_PORT_VLAN_MODE_VLAN_ONLY 2
-#define AR7240_PORT_VLAN_MODE_SECURE 3
-
-
-#define AR7240_REG_STATS_BASE(_port) (0x20000 + (_port) * 0x100)
-
-#define AR7240_STATS_RXBROAD 0x00
-#define AR7240_STATS_RXPAUSE 0x04
-#define AR7240_STATS_RXMULTI 0x08
-#define AR7240_STATS_RXFCSERR 0x0c
-#define AR7240_STATS_RXALIGNERR 0x10
-#define AR7240_STATS_RXRUNT 0x14
-#define AR7240_STATS_RXFRAGMENT 0x18
-#define AR7240_STATS_RX64BYTE 0x1c
-#define AR7240_STATS_RX128BYTE 0x20
-#define AR7240_STATS_RX256BYTE 0x24
-#define AR7240_STATS_RX512BYTE 0x28
-#define AR7240_STATS_RX1024BYTE 0x2c
-#define AR7240_STATS_RX1518BYTE 0x30
-#define AR7240_STATS_RXMAXBYTE 0x34
-#define AR7240_STATS_RXTOOLONG 0x38
-#define AR7240_STATS_RXGOODBYTE 0x3c
-#define AR7240_STATS_RXBADBYTE 0x44
-#define AR7240_STATS_RXOVERFLOW 0x4c
-#define AR7240_STATS_FILTERED 0x50
-#define AR7240_STATS_TXBROAD 0x54
-#define AR7240_STATS_TXPAUSE 0x58
-#define AR7240_STATS_TXMULTI 0x5c
-#define AR7240_STATS_TXUNDERRUN 0x60
-#define AR7240_STATS_TX64BYTE 0x64
-#define AR7240_STATS_TX128BYTE 0x68
-#define AR7240_STATS_TX256BYTE 0x6c
-#define AR7240_STATS_TX512BYTE 0x70
-#define AR7240_STATS_TX1024BYTE 0x74
-#define AR7240_STATS_TX1518BYTE 0x78
-#define AR7240_STATS_TXMAXBYTE 0x7c
-#define AR7240_STATS_TXOVERSIZE 0x80
-#define AR7240_STATS_TXBYTE 0x84
-#define AR7240_STATS_TXCOLLISION 0x8c
-#define AR7240_STATS_TXABORTCOL 0x90
-#define AR7240_STATS_TXMULTICOL 0x94
-#define AR7240_STATS_TXSINGLECOL 0x98
-#define AR7240_STATS_TXEXCDEFER 0x9c
-#define AR7240_STATS_TXDEFER 0xa0
-#define AR7240_STATS_TXLATECOL 0xa4
-
-#define AR7240_PORT_CPU 0
-#define AR7240_NUM_PORTS 6
-#define AR7240_NUM_PHYS 5
-
-#define AR7240_PHY_ID1 0x004d
-#define AR7240_PHY_ID2 0xd041
-
-#define AR934X_PHY_ID1 0x004d
-#define AR934X_PHY_ID2 0xd042
-
-#define AR7240_MAX_VLANS 16
-
-#define AR934X_REG_OPER_MODE0 0x04
-#define AR934X_OPER_MODE0_MAC_GMII_EN BIT(6)
-#define AR934X_OPER_MODE0_PHY_MII_EN BIT(10)
-
-#define AR934X_REG_OPER_MODE1 0x08
-#define AR934X_REG_OPER_MODE1_PHY4_MII_EN BIT(28)
-
-#define AR934X_REG_FLOOD_MASK 0x2c
-#define AR934X_FLOOD_MASK_MC_DP(_p) BIT(16 + (_p))
-#define AR934X_FLOOD_MASK_BC_DP(_p) BIT(25 + (_p))
-
-#define AR934X_REG_QM_CTRL 0x3c
-#define AR934X_QM_CTRL_ARP_EN BIT(15)
-
-#define AR934X_REG_AT_CTRL 0x5c
-#define AR934X_AT_CTRL_AGE_TIME BITS(0, 15)
-#define AR934X_AT_CTRL_AGE_EN BIT(17)
-#define AR934X_AT_CTRL_LEARN_CHANGE BIT(18)
-
-#define AR934X_MIB_ENABLE BIT(30)
-
-#define AR934X_REG_PORT_BASE(_port) (0x100 + (_port) * 0x100)
-
-#define AR934X_REG_PORT_VLAN1(_port) (AR934X_REG_PORT_BASE((_port)) + 0x08)
-#define AR934X_PORT_VLAN1_DEFAULT_SVID_S 0
-#define AR934X_PORT_VLAN1_FORCE_DEFAULT_VID_EN BIT(12)
-#define AR934X_PORT_VLAN1_PORT_TLS_MODE BIT(13)
-#define AR934X_PORT_VLAN1_PORT_VLAN_PROP_EN BIT(14)
-#define AR934X_PORT_VLAN1_PORT_CLONE_EN BIT(15)
-#define AR934X_PORT_VLAN1_DEFAULT_CVID_S 16
-#define AR934X_PORT_VLAN1_FORCE_PORT_VLAN_EN BIT(28)
-#define AR934X_PORT_VLAN1_ING_PORT_PRI_S 29
-
-#define AR934X_REG_PORT_VLAN2(_port) (AR934X_REG_PORT_BASE((_port)) + 0x0c)
-#define AR934X_PORT_VLAN2_PORT_VID_MEM_S 16
-#define AR934X_PORT_VLAN2_8021Q_MODE_S 30
-#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_ONLY 0
-#define AR934X_PORT_VLAN2_8021Q_MODE_PORT_FALLBACK 1
-#define AR934X_PORT_VLAN2_8021Q_MODE_VLAN_ONLY 2
-#define AR934X_PORT_VLAN2_8021Q_MODE_SECURE 3
-
-#define sw_to_ar7240(_dev) container_of(_dev, struct ar7240sw, swdev)
-
-struct ar7240sw_port_stat {
- unsigned long rx_broadcast;
- unsigned long rx_pause;
- unsigned long rx_multicast;
- unsigned long rx_fcs_error;
- unsigned long rx_align_error;
- unsigned long rx_runt;
- unsigned long rx_fragments;
- unsigned long rx_64byte;
- unsigned long rx_128byte;
- unsigned long rx_256byte;
- unsigned long rx_512byte;
- unsigned long rx_1024byte;
- unsigned long rx_1518byte;
- unsigned long rx_maxbyte;
- unsigned long rx_toolong;
- unsigned long rx_good_byte;
- unsigned long rx_bad_byte;
- unsigned long rx_overflow;
- unsigned long filtered;
-
- unsigned long tx_broadcast;
- unsigned long tx_pause;
- unsigned long tx_multicast;
- unsigned long tx_underrun;
- unsigned long tx_64byte;
- unsigned long tx_128byte;
- unsigned long tx_256byte;
- unsigned long tx_512byte;
- unsigned long tx_1024byte;
- unsigned long tx_1518byte;
- unsigned long tx_maxbyte;
- unsigned long tx_oversize;
- unsigned long tx_byte;
- unsigned long tx_collision;
- unsigned long tx_abortcol;
- unsigned long tx_multicol;
- unsigned long tx_singlecol;
- unsigned long tx_excdefer;
- unsigned long tx_defer;
- unsigned long tx_xlatecol;
-};
-
-struct ar7240sw {
- struct mii_bus *mii_bus;
- struct ag71xx_switch_platform_data *swdata;
- struct switch_dev swdev;
- int num_ports;
- u8 ver;
- bool vlan;
- u16 vlan_id[AR7240_MAX_VLANS];
- u8 vlan_table[AR7240_MAX_VLANS];
- u8 vlan_tagged;
- u16 pvid[AR7240_NUM_PORTS];
- char buf[80];
-
- rwlock_t stats_lock;
- struct ar7240sw_port_stat port_stats[AR7240_NUM_PORTS];
-};
-
-struct ar7240sw_hw_stat {
- char string[ETH_GSTRING_LEN];
- int sizeof_stat;
- int reg;
-};
-
-static DEFINE_MUTEX(reg_mutex);
-
-static inline int sw_is_ar7240(struct ar7240sw *as)
-{
- return as->ver == AR7240_MASK_CTRL_VERSION_AR7240;
-}
-
-static inline int sw_is_ar934x(struct ar7240sw *as)
-{
- return as->ver == AR7240_MASK_CTRL_VERSION_AR934X;
-}
-
-static inline u32 ar7240sw_port_mask(struct ar7240sw *as, int port)
-{
- return BIT(port);
-}
-
-static inline u32 ar7240sw_port_mask_all(struct ar7240sw *as)
-{
- return BIT(as->swdev.ports) - 1;
-}
-
-static inline u32 ar7240sw_port_mask_but(struct ar7240sw *as, int port)
-{
- return ar7240sw_port_mask_all(as) & ~BIT(port);
-}
-
-static inline u16 mk_phy_addr(u32 reg)
-{
- return 0x17 & ((reg >> 4) | 0x10);
-}
-
-static inline u16 mk_phy_reg(u32 reg)
-{
- return (reg << 1) & 0x1e;
-}
-
-static inline u16 mk_high_addr(u32 reg)
-{
- return (reg >> 7) & 0x1ff;
-}
-
-static u32 __ar7240sw_reg_read(struct mii_bus *mii, u32 reg)
-{
- unsigned long flags;
- u16 phy_addr;
- u16 phy_reg;
- u32 hi, lo;
-
- reg = (reg & 0xfffffffc) >> 2;
- phy_addr = mk_phy_addr(reg);
- phy_reg = mk_phy_reg(reg);
-
- local_irq_save(flags);
- ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg));
- lo = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg);
- hi = (u32) ag71xx_mdio_mii_read(mii->priv, phy_addr, phy_reg + 1);
- local_irq_restore(flags);
-
- return (hi << 16) | lo;
-}
-
-static void __ar7240sw_reg_write(struct mii_bus *mii, u32 reg, u32 val)
-{
- unsigned long flags;
- u16 phy_addr;
- u16 phy_reg;
-
- reg = (reg & 0xfffffffc) >> 2;
- phy_addr = mk_phy_addr(reg);
- phy_reg = mk_phy_reg(reg);
-
- local_irq_save(flags);
- ag71xx_mdio_mii_write(mii->priv, 0x1f, 0x10, mk_high_addr(reg));
- ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg + 1, (val >> 16));
- ag71xx_mdio_mii_write(mii->priv, phy_addr, phy_reg, (val & 0xffff));
- local_irq_restore(flags);
-}
-
-static u32 ar7240sw_reg_read(struct mii_bus *mii, u32 reg_addr)
-{
- u32 ret;
-
- mutex_lock(&reg_mutex);
- ret = __ar7240sw_reg_read(mii, reg_addr);
- mutex_unlock(&reg_mutex);
-
- return ret;
-}
-
-static void ar7240sw_reg_write(struct mii_bus *mii, u32 reg_addr, u32 reg_val)
-{
- mutex_lock(&reg_mutex);
- __ar7240sw_reg_write(mii, reg_addr, reg_val);
- mutex_unlock(&reg_mutex);
-}
-
-static u32 ar7240sw_reg_rmw(struct mii_bus *mii, u32 reg, u32 mask, u32 val)
-{
- u32 t;
-
- mutex_lock(&reg_mutex);
- t = __ar7240sw_reg_read(mii, reg);
- t &= ~mask;
- t |= val;
- __ar7240sw_reg_write(mii, reg, t);
- mutex_unlock(&reg_mutex);
-
- return t;
-}
-
-static void ar7240sw_reg_set(struct mii_bus *mii, u32 reg, u32 val)
-{
- u32 t;
-
- mutex_lock(&reg_mutex);
- t = __ar7240sw_reg_read(mii, reg);
- t |= val;
- __ar7240sw_reg_write(mii, reg, t);
- mutex_unlock(&reg_mutex);
-}
-
-static int __ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
- unsigned timeout)
-{
- int i;
-
- for (i = 0; i < timeout; i++) {
- u32 t;
-
- t = __ar7240sw_reg_read(mii, reg);
- if ((t & mask) == val)
- return 0;
-
- usleep_range(1000, 2000);
- }
-
- return -ETIMEDOUT;
-}
-
-static int ar7240sw_reg_wait(struct mii_bus *mii, u32 reg, u32 mask, u32 val,
- unsigned timeout)
-{
- int ret;
-
- mutex_lock(&reg_mutex);
- ret = __ar7240sw_reg_wait(mii, reg, mask, val, timeout);
- mutex_unlock(&reg_mutex);
- return ret;
-}
-
-u16 ar7240sw_phy_read(struct mii_bus *mii, unsigned phy_addr,
- unsigned reg_addr)
-{
- u32 t, val = 0xffff;
- int err;
-
- if (phy_addr >= AR7240_NUM_PHYS)
- return 0xffff;
-
- mutex_lock(&reg_mutex);
- t = (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
- (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
- AR7240_MDIO_CTRL_MASTER_EN |
- AR7240_MDIO_CTRL_BUSY |
- AR7240_MDIO_CTRL_CMD_READ;
-
- __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
- err = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
- AR7240_MDIO_CTRL_BUSY, 0, 5);
- if (!err)
- val = __ar7240sw_reg_read(mii, AR7240_REG_MDIO_CTRL);
- mutex_unlock(&reg_mutex);
-
- return val & AR7240_MDIO_CTRL_DATA_M;
-}
-
-int ar7240sw_phy_write(struct mii_bus *mii, unsigned phy_addr,
- unsigned reg_addr, u16 reg_val)
-{
- u32 t;
- int ret;
-
- if (phy_addr >= AR7240_NUM_PHYS)
- return -EINVAL;
-
- mutex_lock(&reg_mutex);
- t = (phy_addr << AR7240_MDIO_CTRL_PHY_ADDR_S) |
- (reg_addr << AR7240_MDIO_CTRL_REG_ADDR_S) |
- AR7240_MDIO_CTRL_MASTER_EN |
- AR7240_MDIO_CTRL_BUSY |
- AR7240_MDIO_CTRL_CMD_WRITE |
- reg_val;
-
- __ar7240sw_reg_write(mii, AR7240_REG_MDIO_CTRL, t);
- ret = __ar7240sw_reg_wait(mii, AR7240_REG_MDIO_CTRL,
- AR7240_MDIO_CTRL_BUSY, 0, 5);
- mutex_unlock(&reg_mutex);
-
- return ret;
-}
-
-static int ar7240sw_capture_stats(struct ar7240sw *as)
-{
- struct mii_bus *mii = as->mii_bus;
- int port;
- int ret;
-
- write_lock(&as->stats_lock);
-
- /* Capture the hardware statistics for all ports */
- ar7240sw_reg_rmw(mii, AR7240_REG_MIB_FUNCTION0,
- (AR7240_MIB_FUNC_M << AR7240_MIB_FUNC_S),
- (AR7240_MIB_FUNC_CAPTURE << AR7240_MIB_FUNC_S));
-
- /* Wait for the capturing to complete. */
- ret = ar7240sw_reg_wait(mii, AR7240_REG_MIB_FUNCTION0,
- AR7240_MIB_BUSY, 0, 10);
-
- if (ret)
- goto unlock;
-
- for (port = 0; port < AR7240_NUM_PORTS; port++) {
- unsigned int base;
- struct ar7240sw_port_stat *stats;
-
- base = AR7240_REG_STATS_BASE(port);
- stats = &as->port_stats[port];
-
-#define READ_STAT(_r) ar7240sw_reg_read(mii, base + AR7240_STATS_ ## _r)
-
- stats->rx_good_byte += READ_STAT(RXGOODBYTE);
- stats->tx_byte += READ_STAT(TXBYTE);
-
-#undef READ_STAT
- }
-
- ret = 0;
-
-unlock:
- write_unlock(&as->stats_lock);
- return ret;
-}
-
-static void ar7240sw_disable_port(struct ar7240sw *as, unsigned port)
-{
- ar7240sw_reg_write(as->mii_bus, AR7240_REG_PORT_CTRL(port),
- AR7240_PORT_CTRL_STATE_DISABLED);
-}
-
-static void ar7240sw_setup(struct ar7240sw *as)
-{
- struct mii_bus *mii = as->mii_bus;
-
- /* Enable CPU port, and disable mirror port */
- ar7240sw_reg_write(mii, AR7240_REG_CPU_PORT,
- AR7240_CPU_PORT_EN |
- (15 << AR7240_MIRROR_PORT_S));
-
- /* Setup TAG priority mapping */
- ar7240sw_reg_write(mii, AR7240_REG_TAG_PRIORITY, 0xfa50);
-
- if (sw_is_ar934x(as)) {
- /* Enable aging, MAC replacing */
- ar7240sw_reg_write(mii, AR934X_REG_AT_CTRL,
- 0x2b /* 5 min age time */ |
- AR934X_AT_CTRL_AGE_EN |
- AR934X_AT_CTRL_LEARN_CHANGE);
- /* Enable ARP frame acknowledge */
- ar7240sw_reg_set(mii, AR934X_REG_QM_CTRL,
- AR934X_QM_CTRL_ARP_EN);
- /* Enable Broadcast/Multicast frames transmitted to the CPU */
- ar7240sw_reg_set(mii, AR934X_REG_FLOOD_MASK,
- AR934X_FLOOD_MASK_BC_DP(0) |
- AR934X_FLOOD_MASK_MC_DP(0));
-
- /* setup MTU */
- ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL,
- AR9340_GLOBAL_CTRL_MTU_M,
- AR9340_GLOBAL_CTRL_MTU_M);
-
- /* Enable MIB counters */
- ar7240sw_reg_set(mii, AR7240_REG_MIB_FUNCTION0,
- AR934X_MIB_ENABLE);
-
- } else {
- /* Enable ARP frame acknowledge, aging, MAC replacing */
- ar7240sw_reg_write(mii, AR7240_REG_AT_CTRL,
- AR7240_AT_CTRL_RESERVED |
- 0x2b /* 5 min age time */ |
- AR7240_AT_CTRL_AGE_EN |
- AR7240_AT_CTRL_ARP_EN |
- AR7240_AT_CTRL_LEARN_CHANGE);
- /* Enable Broadcast frames transmitted to the CPU */
- ar7240sw_reg_set(mii, AR7240_REG_FLOOD_MASK,
- AR7240_FLOOD_MASK_BROAD_TO_CPU);
-
- /* setup MTU */
- ar7240sw_reg_rmw(mii, AR7240_REG_GLOBAL_CTRL,
- AR7240_GLOBAL_CTRL_MTU_M,
- AR7240_GLOBAL_CTRL_MTU_M);
- }
-
- /* setup Service TAG */
- ar7240sw_reg_rmw(mii, AR7240_REG_SERVICE_TAG, AR7240_SERVICE_TAG_M, 0);
-}
-
-/* inspired by phy_poll_reset in drivers/net/phy/phy_device.c */
-static int
-ar7240sw_phy_poll_reset(struct mii_bus *bus)
-{
- const unsigned int sleep_msecs = 20;
- int ret, elapsed, i;
-
- for (elapsed = sleep_msecs; elapsed <= 600;
- elapsed += sleep_msecs) {
- msleep(sleep_msecs);
- for (i = 0; i < AR7240_NUM_PHYS; i++) {
- ret = ar7240sw_phy_read(bus, i, MII_BMCR);
- if (ret < 0)
- return ret;
- if (ret & BMCR_RESET)
- break;
- if (i == AR7240_NUM_PHYS - 1) {
- usleep_range(1000, 2000);
- return 0;
- }
- }
- }
- return -ETIMEDOUT;
-}
-
-static int ar7240sw_reset(struct ar7240sw *as)
-{
- struct mii_bus *mii = as->mii_bus;
- int ret;
- int i;
-
- /* Set all ports to disabled state. */
- for (i = 0; i < AR7240_NUM_PORTS; i++)
- ar7240sw_disable_port(as, i);
-
- /* Wait for transmit queues to drain. */
- usleep_range(2000, 3000);
-
- /* Reset the switch. */
- ar7240sw_reg_write(mii, AR7240_REG_MASK_CTRL,
- AR7240_MASK_CTRL_SOFT_RESET);
-
- ret = ar7240sw_reg_wait(mii, AR7240_REG_MASK_CTRL,
- AR7240_MASK_CTRL_SOFT_RESET, 0, 1000);
-
- /* setup PHYs */
- for (i = 0; i < AR7240_NUM_PHYS; i++) {
- ar7240sw_phy_write(mii, i, MII_ADVERTISE,
- ADVERTISE_ALL | ADVERTISE_PAUSE_CAP |
- ADVERTISE_PAUSE_ASYM);
- ar7240sw_phy_write(mii, i, MII_BMCR,
- BMCR_RESET | BMCR_ANENABLE);
- }
- ret = ar7240sw_phy_poll_reset(mii);
- if (ret)
- return ret;
-
- ar7240sw_setup(as);
- return ret;
-}
-
-static void ar7240sw_setup_port(struct ar7240sw *as, unsigned port, u8 portmask)
-{
- struct mii_bus *mii = as->mii_bus;
- u32 ctrl;
- u32 vid, mode;
-
- ctrl = AR7240_PORT_CTRL_STATE_FORWARD | AR7240_PORT_CTRL_LEARN |
- AR7240_PORT_CTRL_SINGLE_VLAN;
-
- if (port == AR7240_PORT_CPU) {
- ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
- AR7240_PORT_STATUS_SPEED_1000 |
- AR7240_PORT_STATUS_TXFLOW |
- AR7240_PORT_STATUS_RXFLOW |
- AR7240_PORT_STATUS_TXMAC |
- AR7240_PORT_STATUS_RXMAC |
- AR7240_PORT_STATUS_DUPLEX);
- } else {
- ar7240sw_reg_write(mii, AR7240_REG_PORT_STATUS(port),
- AR7240_PORT_STATUS_LINK_AUTO);
- }
-
- /* Set the default VID for this port */
- if (as->vlan) {
- vid = as->vlan_id[as->pvid[port]];
- mode = AR7240_PORT_VLAN_MODE_SECURE;
- } else {
- vid = port;
- mode = AR7240_PORT_VLAN_MODE_PORT_ONLY;
- }
-
- if (as->vlan) {
- if (as->vlan_tagged & BIT(port))
- ctrl |= AR7240_PORT_CTRL_VLAN_MODE_ADD <<
- AR7240_PORT_CTRL_VLAN_MODE_S;
- else
- ctrl |= AR7240_PORT_CTRL_VLAN_MODE_STRIP <<
- AR7240_PORT_CTRL_VLAN_MODE_S;
- } else {
- ctrl |= AR7240_PORT_CTRL_VLAN_MODE_KEEP <<
- AR7240_PORT_CTRL_VLAN_MODE_S;
- }
-
- if (!portmask) {
- if (port == AR7240_PORT_CPU)
- portmask = ar7240sw_port_mask_but(as, AR7240_PORT_CPU);
- else
- portmask = ar7240sw_port_mask(as, AR7240_PORT_CPU);
- }
-
- /* preserve mirror rx&tx flags */
- ctrl |= ar7240sw_reg_read(mii, AR7240_REG_PORT_CTRL(port)) &
- (AR7240_PORT_CTRL_MIRROR_RX | AR7240_PORT_CTRL_MIRROR_TX);
-
- /* allow the port to talk to all other ports, but exclude its
- * own ID to prevent frames from being reflected back to the
- * port that they came from */
- portmask &= ar7240sw_port_mask_but(as, port);
-
- ar7240sw_reg_write(mii, AR7240_REG_PORT_CTRL(port), ctrl);
- if (sw_is_ar934x(as)) {
- u32 vlan1, vlan2;
-
- vlan1 = (vid << AR934X_PORT_VLAN1_DEFAULT_CVID_S);
- vlan2 = (portmask << AR934X_PORT_VLAN2_PORT_VID_MEM_S) |
- (mode << AR934X_PORT_VLAN2_8021Q_MODE_S);
- ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN1(port), vlan1);
- ar7240sw_reg_write(mii, AR934X_REG_PORT_VLAN2(port), vlan2);
- } else {
- u32 vlan;
-
- vlan = vid | (mode << AR7240_PORT_VLAN_MODE_S) |
- (portmask << AR7240_PORT_VLAN_DEST_PORTS_S);
-
- ar7240sw_reg_write(mii, AR7240_REG_PORT_VLAN(port), vlan);
- }
-}
-
-static int ar7240_set_addr(struct ar7240sw *as, u8 *addr)
-{
- struct mii_bus *mii = as->mii_bus;
- u32 t;
-
- t = (addr[4] << 8) | addr[5];
- ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR0, t);
-
- t = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
- ar7240sw_reg_write(mii, AR7240_REG_MAC_ADDR1, t);
-
- return 0;
-}
-
-static int
-ar7240_set_vid(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- as->vlan_id[val->port_vlan] = val->value.i;
- return 0;
-}
-
-static int
-ar7240_get_vid(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- val->value.i = as->vlan_id[val->port_vlan];
- return 0;
-}
-
-static int
-ar7240_set_pvid(struct switch_dev *dev, int port, int vlan)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
-
- /* make sure no invalid PVIDs get set */
-
- if (vlan >= dev->vlans)
- return -EINVAL;
-
- as->pvid[port] = vlan;
- return 0;
-}
-
-static int
-ar7240_get_pvid(struct switch_dev *dev, int port, int *vlan)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- *vlan = as->pvid[port];
- return 0;
-}
-
-static int
-ar7240_get_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- u8 ports = as->vlan_table[val->port_vlan];
- int i;
-
- val->len = 0;
- for (i = 0; i < as->swdev.ports; i++) {
- struct switch_port *p;
-
- if (!(ports & (1 << i)))
- continue;
-
- p = &val->value.ports[val->len++];
- p->id = i;
- if (as->vlan_tagged & (1 << i))
- p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
- else
- p->flags = 0;
- }
- return 0;
-}
-
-static int
-ar7240_set_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- u8 *vt = &as->vlan_table[val->port_vlan];
- int i, j;
-
- *vt = 0;
- for (i = 0; i < val->len; i++) {
- struct switch_port *p = &val->value.ports[i];
-
- if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
- as->vlan_tagged |= (1 << p->id);
- else {
- as->vlan_tagged &= ~(1 << p->id);
- as->pvid[p->id] = val->port_vlan;
-
- /* make sure that an untagged port does not
- * appear in other vlans */
- for (j = 0; j < AR7240_MAX_VLANS; j++) {
- if (j == val->port_vlan)
- continue;
- as->vlan_table[j] &= ~(1 << p->id);
- }
- }
-
- *vt |= 1 << p->id;
- }
- return 0;
-}
-
-static int
-ar7240_set_vlan(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- as->vlan = !!val->value.i;
- return 0;
-}
-
-static int
-ar7240_get_vlan(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- val->value.i = as->vlan;
- return 0;
-}
-
-static void
-ar7240_vtu_op(struct ar7240sw *as, u32 op, u32 val)
-{
- struct mii_bus *mii = as->mii_bus;
-
- if (ar7240sw_reg_wait(mii, AR7240_REG_VTU, AR7240_VTU_ACTIVE, 0, 5))
- return;
-
- if ((op & AR7240_VTU_OP) == AR7240_VTU_OP_LOAD) {
- val &= AR7240_VTUDATA_MEMBER;
- val |= AR7240_VTUDATA_VALID;
- ar7240sw_reg_write(mii, AR7240_REG_VTU_DATA, val);
- }
- op |= AR7240_VTU_ACTIVE;
- ar7240sw_reg_write(mii, AR7240_REG_VTU, op);
-}
-
-static int
-ar7240_hw_apply(struct switch_dev *dev)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- u8 portmask[AR7240_NUM_PORTS];
- int i, j;
-
- /* flush all vlan translation unit entries */
- ar7240_vtu_op(as, AR7240_VTU_OP_FLUSH, 0);
-
- memset(portmask, 0, sizeof(portmask));
- if (as->vlan) {
- /* calculate the port destination masks and load vlans
- * into the vlan translation unit */
- for (j = 0; j < AR7240_MAX_VLANS; j++) {
- u8 vp = as->vlan_table[j];
-
- if (!vp)
- continue;
-
- for (i = 0; i < as->swdev.ports; i++) {
- u8 mask = (1 << i);
- if (vp & mask)
- portmask[i] |= vp & ~mask;
- }
-
- ar7240_vtu_op(as,
- AR7240_VTU_OP_LOAD |
- (as->vlan_id[j] << AR7240_VTU_VID_S),
- as->vlan_table[j]);
- }
- } else {
- /* vlan disabled:
- * isolate all ports, but connect them to the cpu port */
- for (i = 0; i < as->swdev.ports; i++) {
- if (i == AR7240_PORT_CPU)
- continue;
-
- portmask[i] = 1 << AR7240_PORT_CPU;
- portmask[AR7240_PORT_CPU] |= (1 << i);
- }
- }
-
- /* update the port destination mask registers and tag settings */
- for (i = 0; i < as->swdev.ports; i++)
- ar7240sw_setup_port(as, i, portmask[i]);
-
- return 0;
-}
-
-static int
-ar7240_reset_switch(struct switch_dev *dev)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- ar7240sw_reset(as);
- return 0;
-}
-
-static int
-ar7240_get_port_link(struct switch_dev *dev, int port,
- struct switch_port_link *link)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
- u32 status;
-
- if (port >= AR7240_NUM_PORTS)
- return -EINVAL;
-
- status = ar7240sw_reg_read(mii, AR7240_REG_PORT_STATUS(port));
- link->aneg = !!(status & AR7240_PORT_STATUS_LINK_AUTO);
- if (link->aneg) {
- link->link = !!(status & AR7240_PORT_STATUS_LINK_UP);
- if (!link->link)
- return 0;
- } else {
- link->link = true;
- }
-
- link->duplex = !!(status & AR7240_PORT_STATUS_DUPLEX);
- link->tx_flow = !!(status & AR7240_PORT_STATUS_TXFLOW);
- link->rx_flow = !!(status & AR7240_PORT_STATUS_RXFLOW);
- switch (status & AR7240_PORT_STATUS_SPEED_M) {
- case AR7240_PORT_STATUS_SPEED_10:
- link->speed = SWITCH_PORT_SPEED_10;
- break;
- case AR7240_PORT_STATUS_SPEED_100:
- link->speed = SWITCH_PORT_SPEED_100;
- break;
- case AR7240_PORT_STATUS_SPEED_1000:
- link->speed = SWITCH_PORT_SPEED_1000;
- break;
- }
-
- return 0;
-}
-
-static int
-ar7240_get_port_stats(struct switch_dev *dev, int port,
- struct switch_port_stats *stats)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
-
- if (port >= AR7240_NUM_PORTS)
- return -EINVAL;
-
- ar7240sw_capture_stats(as);
-
- read_lock(&as->stats_lock);
- stats->rx_bytes = as->port_stats[port].rx_good_byte;
- stats->tx_bytes = as->port_stats[port].tx_byte;
- read_unlock(&as->stats_lock);
-
- return 0;
-}
-
-static int
-ar7240_set_mirror_monitor_port(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
-
- int port = val->value.i;
-
- if (port > 15)
- return -EINVAL;
-
- ar7240sw_reg_rmw(mii, AR7240_REG_CPU_PORT,
- AR7240_MIRROR_PORT_M << AR7240_MIRROR_PORT_S,
- port << AR7240_MIRROR_PORT_S);
-
- return 0;
-}
-
-static int
-ar7240_get_mirror_monitor_port(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
-
- u32 ret;
-
- ret = ar7240sw_reg_read(mii, AR7240_REG_CPU_PORT);
- val->value.i = (ret >> AR7240_MIRROR_PORT_S) & AR7240_MIRROR_PORT_M;
-
- return 0;
-}
-
-static int
-ar7240_set_mirror_rx(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
-
- int port = val->port_vlan;
-
- if (port >= dev->ports)
- return -EINVAL;
-
- if (val && val->value.i == 1)
- ar7240sw_reg_set(mii, AR7240_REG_PORT_CTRL(port),
- AR7240_PORT_CTRL_MIRROR_RX);
- else
- ar7240sw_reg_rmw(mii, AR7240_REG_PORT_CTRL(port),
- AR7240_PORT_CTRL_MIRROR_RX, 0);
-
- return 0;
-}
-
-static int
-ar7240_get_mirror_rx(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
-
- u32 ctrl;
-
- int port = val->port_vlan;
-
- if (port >= dev->ports)
- return -EINVAL;
-
- ctrl = ar7240sw_reg_read(mii, AR7240_REG_PORT_CTRL(port));
-
- if ((ctrl & AR7240_PORT_CTRL_MIRROR_RX) == AR7240_PORT_CTRL_MIRROR_RX)
- val->value.i = 1;
- else
- val->value.i = 0;
-
- return 0;
-}
-
-static int
-ar7240_set_mirror_tx(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
-
- int port = val->port_vlan;
-
- if (port >= dev->ports)
- return -EINVAL;
-
- if (val && val->value.i == 1)
- ar7240sw_reg_set(mii, AR7240_REG_PORT_CTRL(port),
- AR7240_PORT_CTRL_MIRROR_TX);
- else
- ar7240sw_reg_rmw(mii, AR7240_REG_PORT_CTRL(port),
- AR7240_PORT_CTRL_MIRROR_TX, 0);
-
- return 0;
-}
-
-static int
-ar7240_get_mirror_tx(struct switch_dev *dev, const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct ar7240sw *as = sw_to_ar7240(dev);
- struct mii_bus *mii = as->mii_bus;
-
- u32 ctrl;
-
- int port = val->port_vlan;
-
- if (port >= dev->ports)
- return -EINVAL;
-
- ctrl = ar7240sw_reg_read(mii, AR7240_REG_PORT_CTRL(port));
-
- if ((ctrl & AR7240_PORT_CTRL_MIRROR_TX) == AR7240_PORT_CTRL_MIRROR_TX)
- val->value.i = 1;
- else
- val->value.i = 0;
-
- return 0;
-}
-
-static struct switch_attr ar7240_globals[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_vlan",
- .description = "Enable VLAN mode",
- .set = ar7240_set_vlan,
- .get = ar7240_get_vlan,
- .max = 1
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "mirror_monitor_port",
- .description = "Mirror monitor port",
- .set = ar7240_set_mirror_monitor_port,
- .get = ar7240_get_mirror_monitor_port,
- .max = 15
- },
-};
-
-static struct switch_attr ar7240_port[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_mirror_rx",
- .description = "Enable mirroring of RX packets",
- .set = ar7240_set_mirror_rx,
- .get = ar7240_get_mirror_rx,
- .max = 1
- },
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_mirror_tx",
- .description = "Enable mirroring of TX packets",
- .set = ar7240_set_mirror_tx,
- .get = ar7240_get_mirror_tx,
- .max = 1
- },
-};
-
-static struct switch_attr ar7240_vlan[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "vid",
- .description = "VLAN ID",
- .set = ar7240_set_vid,
- .get = ar7240_get_vid,
- .max = 4094,
- },
-};
-
-static const struct switch_dev_ops ar7240_ops = {
- .attr_global = {
- .attr = ar7240_globals,
- .n_attr = ARRAY_SIZE(ar7240_globals),
- },
- .attr_port = {
- .attr = ar7240_port,
- .n_attr = ARRAY_SIZE(ar7240_port),
- },
- .attr_vlan = {
- .attr = ar7240_vlan,
- .n_attr = ARRAY_SIZE(ar7240_vlan),
- },
- .get_port_pvid = ar7240_get_pvid,
- .set_port_pvid = ar7240_set_pvid,
- .get_vlan_ports = ar7240_get_ports,
- .set_vlan_ports = ar7240_set_ports,
- .apply_config = ar7240_hw_apply,
- .reset_switch = ar7240_reset_switch,
- .get_port_link = ar7240_get_port_link,
- .get_port_stats = ar7240_get_port_stats,
-};
-
-static struct ar7240sw *ar7240_probe(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- struct mii_bus *mii = ag->mii_bus;
- struct ar7240sw *as;
- struct switch_dev *swdev;
- u32 ctrl;
- u16 phy_id1;
- u16 phy_id2;
- int i;
-
- phy_id1 = ar7240sw_phy_read(mii, 0, MII_PHYSID1);
- phy_id2 = ar7240sw_phy_read(mii, 0, MII_PHYSID2);
- if ((phy_id1 != AR7240_PHY_ID1 || phy_id2 != AR7240_PHY_ID2) &&
- (phy_id1 != AR934X_PHY_ID1 || phy_id2 != AR934X_PHY_ID2)) {
- pr_err("%s: unknown phy id '%04x:%04x'\n",
- dev_name(&mii->dev), phy_id1, phy_id2);
- return NULL;
- }
-
- as = kzalloc(sizeof(*as), GFP_KERNEL);
- if (!as)
- return NULL;
-
- as->mii_bus = mii;
- as->swdata = pdata->switch_data;
-
- swdev = &as->swdev;
-
- ctrl = ar7240sw_reg_read(mii, AR7240_REG_MASK_CTRL);
- as->ver = (ctrl >> AR7240_MASK_CTRL_VERSION_S) &
- AR7240_MASK_CTRL_VERSION_M;
-
- if (sw_is_ar7240(as)) {
- swdev->name = "AR7240/AR9330 built-in switch";
- swdev->ports = AR7240_NUM_PORTS - 1;
- } else if (sw_is_ar934x(as)) {
- swdev->name = "AR934X built-in switch";
-
- if (pdata->phy_if_mode == PHY_INTERFACE_MODE_GMII) {
- ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
- AR934X_OPER_MODE0_MAC_GMII_EN);
- } else if (pdata->phy_if_mode == PHY_INTERFACE_MODE_MII) {
- ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE0,
- AR934X_OPER_MODE0_PHY_MII_EN);
- } else {
- pr_err("%s: invalid PHY interface mode\n",
- dev_name(&mii->dev));
- goto err_free;
- }
-
- if (as->swdata->phy4_mii_en) {
- ar7240sw_reg_set(mii, AR934X_REG_OPER_MODE1,
- AR934X_REG_OPER_MODE1_PHY4_MII_EN);
- swdev->ports = AR7240_NUM_PORTS - 1;
- } else {
- swdev->ports = AR7240_NUM_PORTS;
- }
- } else {
- pr_err("%s: unsupported chip, ctrl=%08x\n",
- dev_name(&mii->dev), ctrl);
- goto err_free;
- }
-
- swdev->cpu_port = AR7240_PORT_CPU;
- swdev->vlans = AR7240_MAX_VLANS;
- swdev->ops = &ar7240_ops;
-
- if (register_switch(&as->swdev, ag->dev) < 0)
- goto err_free;
-
- pr_info("%s: Found an %s\n", dev_name(&mii->dev), swdev->name);
-
- /* initialize defaults */
- for (i = 0; i < AR7240_MAX_VLANS; i++)
- as->vlan_id[i] = i;
-
- as->vlan_table[0] = ar7240sw_port_mask_all(as);
-
- return as;
-
-err_free:
- kfree(as);
- return NULL;
-}
-
-static void link_function(struct work_struct *work) {
- struct ag71xx *ag = container_of(work, struct ag71xx, link_work.work);
- struct ar7240sw *as = ag->phy_priv;
- unsigned long flags;
- u8 mask;
- int i;
- int status = 0;
-
- mask = ~as->swdata->phy_poll_mask;
- for (i = 0; i < AR7240_NUM_PHYS; i++) {
- int link;
-
- if (!(mask & BIT(i)))
- continue;
-
- link = ar7240sw_phy_read(ag->mii_bus, i, MII_BMSR);
- if (link & BMSR_LSTATUS) {
- status = 1;
- break;
- }
- }
-
- spin_lock_irqsave(&ag->lock, flags);
- if (status != ag->link) {
- ag->link = status;
- ag71xx_link_adjust(ag);
- }
- spin_unlock_irqrestore(&ag->lock, flags);
-
- schedule_delayed_work(&ag->link_work, HZ / 2);
-}
-
-void ag71xx_ar7240_start(struct ag71xx *ag)
-{
- struct ar7240sw *as = ag->phy_priv;
-
- ar7240sw_reset(as);
-
- ag->speed = SPEED_1000;
- ag->duplex = 1;
-
- ar7240_set_addr(as, ag->dev->dev_addr);
- ar7240_hw_apply(&as->swdev);
-
- schedule_delayed_work(&ag->link_work, HZ / 10);
-}
-
-void ag71xx_ar7240_stop(struct ag71xx *ag)
-{
- cancel_delayed_work_sync(&ag->link_work);
-}
-
-int ag71xx_ar7240_init(struct ag71xx *ag)
-{
- struct ar7240sw *as;
-
- as = ar7240_probe(ag);
- if (!as)
- return -ENODEV;
-
- ag->phy_priv = as;
- ar7240sw_reset(as);
-
- rwlock_init(&as->stats_lock);
- INIT_DELAYED_WORK(&ag->link_work, link_function);
-
- return 0;
-}
-
-void ag71xx_ar7240_cleanup(struct ag71xx *ag)
-{
- struct ar7240sw *as = ag->phy_priv;
-
- if (!as)
- return;
-
- unregister_switch(&as->swdev);
- kfree(as);
- ag->phy_priv = NULL;
-}
diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c
deleted file mode 100644
index 7ec43b7221..0000000000
--- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ar8216.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Atheros AR71xx built-in ethernet mac driver
- * Special support for the Atheros ar8216 switch chip
- *
- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "ag71xx.h"
-
-#define AR8216_PACKET_TYPE_MASK 0xf
-#define AR8216_PACKET_TYPE_NORMAL 0
-
-#define AR8216_HEADER_LEN 2
-
-void ag71xx_add_ar8216_header(struct ag71xx *ag, struct sk_buff *skb)
-{
- skb_push(skb, AR8216_HEADER_LEN);
- skb->data[0] = 0x10;
- skb->data[1] = 0x80;
-}
-
-int ag71xx_remove_ar8216_header(struct ag71xx *ag, struct sk_buff *skb,
- int pktlen)
-{
- u8 type;
-
- type = skb->data[1] & AR8216_PACKET_TYPE_MASK;
- switch (type) {
- case AR8216_PACKET_TYPE_NORMAL:
- break;
-
- default:
- return -EINVAL;
- }
-
- skb_pull(skb, AR8216_HEADER_LEN);
- return 0;
-}
diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c
deleted file mode 100644
index 20cf1c15c8..0000000000
--- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_debugfs.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/debugfs.h>
-
-#include "ag71xx.h"
-
-static struct dentry *ag71xx_debugfs_root;
-
-static int ag71xx_debugfs_generic_open(struct inode *inode, struct file *file)
-{
- file->private_data = inode->i_private;
- return 0;
-}
-
-void ag71xx_debugfs_update_int_stats(struct ag71xx *ag, u32 status)
-{
- if (status)
- ag->debug.int_stats.total++;
- if (status & AG71XX_INT_TX_PS)
- ag->debug.int_stats.tx_ps++;
- if (status & AG71XX_INT_TX_UR)
- ag->debug.int_stats.tx_ur++;
- if (status & AG71XX_INT_TX_BE)
- ag->debug.int_stats.tx_be++;
- if (status & AG71XX_INT_RX_PR)
- ag->debug.int_stats.rx_pr++;
- if (status & AG71XX_INT_RX_OF)
- ag->debug.int_stats.rx_of++;
- if (status & AG71XX_INT_RX_BE)
- ag->debug.int_stats.rx_be++;
-}
-
-static ssize_t read_file_int_stats(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
-#define PR_INT_STAT(_label, _field) \
- len += snprintf(buf + len, sizeof(buf) - len, \
- "%20s: %10lu\n", _label, ag->debug.int_stats._field);
-
- struct ag71xx *ag = file->private_data;
- char buf[256];
- unsigned int len = 0;
-
- PR_INT_STAT("TX Packet Sent", tx_ps);
- PR_INT_STAT("TX Underrun", tx_ur);
- PR_INT_STAT("TX Bus Error", tx_be);
- PR_INT_STAT("RX Packet Received", rx_pr);
- PR_INT_STAT("RX Overflow", rx_of);
- PR_INT_STAT("RX Bus Error", rx_be);
- len += snprintf(buf + len, sizeof(buf) - len, "\n");
- PR_INT_STAT("Total", total);
-
- return simple_read_from_buffer(user_buf, count, ppos, buf, len);
-#undef PR_INT_STAT
-}
-
-static const struct file_operations ag71xx_fops_int_stats = {
- .open = ag71xx_debugfs_generic_open,
- .read = read_file_int_stats,
- .owner = THIS_MODULE
-};
-
-void ag71xx_debugfs_update_napi_stats(struct ag71xx *ag, int rx, int tx)
-{
- struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
-
- if (rx) {
- stats->rx_count++;
- stats->rx_packets += rx;
- if (rx <= AG71XX_NAPI_WEIGHT)
- stats->rx[rx]++;
- if (rx > stats->rx_packets_max)
- stats->rx_packets_max = rx;
- }
-
- if (tx) {
- stats->tx_count++;
- stats->tx_packets += tx;
- if (tx <= AG71XX_NAPI_WEIGHT)
- stats->tx[tx]++;
- if (tx > stats->tx_packets_max)
- stats->tx_packets_max = tx;
- }
-}
-
-static ssize_t read_file_napi_stats(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ag71xx *ag = file->private_data;
- struct ag71xx_napi_stats *stats = &ag->debug.napi_stats;
- char *buf;
- unsigned int buflen;
- unsigned int len = 0;
- unsigned long rx_avg = 0;
- unsigned long tx_avg = 0;
- int ret;
- int i;
-
- buflen = 2048;
- buf = kmalloc(buflen, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- if (stats->rx_count)
- rx_avg = stats->rx_packets / stats->rx_count;
-
- if (stats->tx_count)
- tx_avg = stats->tx_packets / stats->tx_count;
-
- len += snprintf(buf + len, buflen - len, "%3s %10s %10s\n",
- "len", "rx", "tx");
-
- for (i = 1; i <= AG71XX_NAPI_WEIGHT; i++)
- len += snprintf(buf + len, buflen - len,
- "%3d: %10lu %10lu\n",
- i, stats->rx[i], stats->tx[i]);
-
- len += snprintf(buf + len, buflen - len, "\n");
-
- len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
- "sum", stats->rx_count, stats->tx_count);
- len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
- "avg", rx_avg, tx_avg);
- len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
- "max", stats->rx_packets_max, stats->tx_packets_max);
- len += snprintf(buf + len, buflen - len, "%3s: %10lu %10lu\n",
- "pkt", stats->rx_packets, stats->tx_packets);
-
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
- kfree(buf);
-
- return ret;
-}
-
-static const struct file_operations ag71xx_fops_napi_stats = {
- .open = ag71xx_debugfs_generic_open,
- .read = read_file_napi_stats,
- .owner = THIS_MODULE
-};
-
-#define DESC_PRINT_LEN 64
-
-static ssize_t read_file_ring(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos,
- struct ag71xx *ag,
- struct ag71xx_ring *ring,
- unsigned desc_reg)
-{
- int ring_size = BIT(ring->order);
- int ring_mask = ring_size - 1;
- char *buf;
- unsigned int buflen;
- unsigned int len = 0;
- unsigned long flags;
- ssize_t ret;
- int curr;
- int dirty;
- u32 desc_hw;
- int i;
-
- buflen = (ring_size * DESC_PRINT_LEN);
- buf = kmalloc(buflen, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- len += snprintf(buf + len, buflen - len,
- "Idx ... %-8s %-8s %-8s %-8s .\n",
- "desc", "next", "data", "ctrl");
-
- spin_lock_irqsave(&ag->lock, flags);
-
- curr = (ring->curr & ring_mask);
- dirty = (ring->dirty & ring_mask);
- desc_hw = ag71xx_rr(ag, desc_reg);
- for (i = 0; i < ring_size; i++) {
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
- u32 desc_dma = ((u32) ring->descs_dma) + i * AG71XX_DESC_SIZE;
-
- len += snprintf(buf + len, buflen - len,
- "%3d %c%c%c %08x %08x %08x %08x %c\n",
- i,
- (i == curr) ? 'C' : ' ',
- (i == dirty) ? 'D' : ' ',
- (desc_hw == desc_dma) ? 'H' : ' ',
- desc_dma,
- desc->next,
- desc->data,
- desc->ctrl,
- (desc->ctrl & DESC_EMPTY) ? 'E' : '*');
- }
-
- spin_unlock_irqrestore(&ag->lock, flags);
-
- ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
- kfree(buf);
-
- return ret;
-}
-
-static ssize_t read_file_tx_ring(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ag71xx *ag = file->private_data;
-
- return read_file_ring(file, user_buf, count, ppos, ag, &ag->tx_ring,
- AG71XX_REG_TX_DESC);
-}
-
-static const struct file_operations ag71xx_fops_tx_ring = {
- .open = ag71xx_debugfs_generic_open,
- .read = read_file_tx_ring,
- .owner = THIS_MODULE
-};
-
-static ssize_t read_file_rx_ring(struct file *file, char __user *user_buf,
- size_t count, loff_t *ppos)
-{
- struct ag71xx *ag = file->private_data;
-
- return read_file_ring(file, user_buf, count, ppos, ag, &ag->rx_ring,
- AG71XX_REG_RX_DESC);
-}
-
-static const struct file_operations ag71xx_fops_rx_ring = {
- .open = ag71xx_debugfs_generic_open,
- .read = read_file_rx_ring,
- .owner = THIS_MODULE
-};
-
-void ag71xx_debugfs_exit(struct ag71xx *ag)
-{
- debugfs_remove_recursive(ag->debug.debugfs_dir);
-}
-
-int ag71xx_debugfs_init(struct ag71xx *ag)
-{
- struct device *dev = &ag->pdev->dev;
-
- ag->debug.debugfs_dir = debugfs_create_dir(dev_name(dev),
- ag71xx_debugfs_root);
- if (!ag->debug.debugfs_dir) {
- dev_err(dev, "unable to create debugfs directory\n");
- return -ENOENT;
- }
-
- debugfs_create_file("int_stats", S_IRUGO, ag->debug.debugfs_dir,
- ag, &ag71xx_fops_int_stats);
- debugfs_create_file("napi_stats", S_IRUGO, ag->debug.debugfs_dir,
- ag, &ag71xx_fops_napi_stats);
- debugfs_create_file("tx_ring", S_IRUGO, ag->debug.debugfs_dir,
- ag, &ag71xx_fops_tx_ring);
- debugfs_create_file("rx_ring", S_IRUGO, ag->debug.debugfs_dir,
- ag, &ag71xx_fops_rx_ring);
-
- return 0;
-}
-
-int ag71xx_debugfs_root_init(void)
-{
- if (ag71xx_debugfs_root)
- return -EBUSY;
-
- ag71xx_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL);
- if (!ag71xx_debugfs_root)
- return -ENOENT;
-
- return 0;
-}
-
-void ag71xx_debugfs_root_exit(void)
-{
- debugfs_remove(ag71xx_debugfs_root);
- ag71xx_debugfs_root = NULL;
-}
diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c
deleted file mode 100644
index 9e5a53e7fc..0000000000
--- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_ethtool.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "ag71xx.h"
-#include <linux/version.h>
-
-static void ag71xx_ethtool_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- strcpy(info->driver, ag->pdev->dev.driver->name);
- strcpy(info->version, AG71XX_DRV_VERSION);
- strcpy(info->bus_info, dev_name(&ag->pdev->dev));
-}
-
-static u32 ag71xx_ethtool_get_msglevel(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- return ag->msg_enable;
-}
-
-static void ag71xx_ethtool_set_msglevel(struct net_device *dev, u32 msg_level)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- ag->msg_enable = msg_level;
-}
-
-static void ag71xx_ethtool_get_ringparam(struct net_device *dev,
- struct ethtool_ringparam *er)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- er->tx_max_pending = AG71XX_TX_RING_SIZE_MAX;
- er->rx_max_pending = AG71XX_RX_RING_SIZE_MAX;
- er->rx_mini_max_pending = 0;
- er->rx_jumbo_max_pending = 0;
-
- er->tx_pending = BIT(ag->tx_ring.order);
- er->rx_pending = BIT(ag->rx_ring.order);
- er->rx_mini_pending = 0;
- er->rx_jumbo_pending = 0;
-
- if (ag->tx_ring.desc_split)
- er->tx_pending /= AG71XX_TX_RING_DS_PER_PKT;
-}
-
-static int ag71xx_ethtool_set_ringparam(struct net_device *dev,
- struct ethtool_ringparam *er)
-{
- struct ag71xx *ag = netdev_priv(dev);
- unsigned tx_size;
- unsigned rx_size;
- int err = 0;
-
- if (er->rx_mini_pending != 0||
- er->rx_jumbo_pending != 0 ||
- er->rx_pending == 0 ||
- er->tx_pending == 0)
- return -EINVAL;
-
- tx_size = er->tx_pending < AG71XX_TX_RING_SIZE_MAX ?
- er->tx_pending : AG71XX_TX_RING_SIZE_MAX;
-
- rx_size = er->rx_pending < AG71XX_RX_RING_SIZE_MAX ?
- er->rx_pending : AG71XX_RX_RING_SIZE_MAX;
-
- if (netif_running(dev)) {
- err = dev->netdev_ops->ndo_stop(dev);
- if (err)
- return err;
- }
-
- if (ag->tx_ring.desc_split)
- tx_size *= AG71XX_TX_RING_DS_PER_PKT;
-
- ag->tx_ring.order = ag71xx_ring_size_order(tx_size);
- ag->rx_ring.order = ag71xx_ring_size_order(rx_size);
-
- if (netif_running(dev))
- err = dev->netdev_ops->ndo_open(dev);
-
- return err;
-}
-
-static int ag71xx_ethtool_nway_reset(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
- struct phy_device *phydev = ag->phy_dev;
-
- if (!phydev)
- return -ENODEV;
-
- return genphy_restart_aneg(phydev);
-}
-
-struct ethtool_ops ag71xx_ethtool_ops = {
- .get_drvinfo = ag71xx_ethtool_get_drvinfo,
- .get_msglevel = ag71xx_ethtool_get_msglevel,
- .set_msglevel = ag71xx_ethtool_set_msglevel,
- .get_ringparam = ag71xx_ethtool_get_ringparam,
- .set_ringparam = ag71xx_ethtool_set_ringparam,
- .get_link_ksettings = phy_ethtool_get_link_ksettings,
- .set_link_ksettings = phy_ethtool_set_link_ksettings,
- .get_link = ethtool_op_get_link,
- .get_ts_info = ethtool_op_get_ts_info,
- .nway_reset = ag71xx_ethtool_nway_reset,
-};
diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
deleted file mode 100644
index ebbe8a7472..0000000000
--- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c
+++ /dev/null
@@ -1,1494 +0,0 @@
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "ag71xx.h"
-
-#define AG71XX_DEFAULT_MSG_ENABLE \
- (NETIF_MSG_DRV \
- | NETIF_MSG_PROBE \
- | NETIF_MSG_LINK \
- | NETIF_MSG_TIMER \
- | NETIF_MSG_IFDOWN \
- | NETIF_MSG_IFUP \
- | NETIF_MSG_RX_ERR \
- | NETIF_MSG_TX_ERR)
-
-static int ag71xx_msg_level = -1;
-
-module_param_named(msg_level, ag71xx_msg_level, int, 0);
-MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
-
-#define ETH_SWITCH_HEADER_LEN 2
-
-static int ag71xx_tx_packets(struct ag71xx *ag, bool flush);
-static void ag71xx_qca955x_sgmii_init(void);
-
-static inline unsigned int ag71xx_max_frame_len(unsigned int mtu)
-{
- return ETH_SWITCH_HEADER_LEN + ETH_HLEN + VLAN_HLEN + mtu + ETH_FCS_LEN;
-}
-
-static void ag71xx_dump_dma_regs(struct ag71xx *ag)
-{
- DBG("%s: dma_tx_ctrl=%08x, dma_tx_desc=%08x, dma_tx_status=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_TX_CTRL),
- ag71xx_rr(ag, AG71XX_REG_TX_DESC),
- ag71xx_rr(ag, AG71XX_REG_TX_STATUS));
-
- DBG("%s: dma_rx_ctrl=%08x, dma_rx_desc=%08x, dma_rx_status=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_RX_CTRL),
- ag71xx_rr(ag, AG71XX_REG_RX_DESC),
- ag71xx_rr(ag, AG71XX_REG_RX_STATUS));
-}
-
-static void ag71xx_dump_regs(struct ag71xx *ag)
-{
- DBG("%s: mac_cfg1=%08x, mac_cfg2=%08x, ipg=%08x, hdx=%08x, mfl=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_MAC_CFG1),
- ag71xx_rr(ag, AG71XX_REG_MAC_CFG2),
- ag71xx_rr(ag, AG71XX_REG_MAC_IPG),
- ag71xx_rr(ag, AG71XX_REG_MAC_HDX),
- ag71xx_rr(ag, AG71XX_REG_MAC_MFL));
- DBG("%s: mac_ifctl=%08x, mac_addr1=%08x, mac_addr2=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL),
- ag71xx_rr(ag, AG71XX_REG_MAC_ADDR1),
- ag71xx_rr(ag, AG71XX_REG_MAC_ADDR2));
- DBG("%s: fifo_cfg0=%08x, fifo_cfg1=%08x, fifo_cfg2=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG0),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG1),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG2));
- DBG("%s: fifo_cfg3=%08x, fifo_cfg4=%08x, fifo_cfg5=%08x\n",
- ag->dev->name,
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG3),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG4),
- ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5));
-}
-
-static inline void ag71xx_dump_intr(struct ag71xx *ag, char *label, u32 intr)
-{
- DBG("%s: %s intr=%08x %s%s%s%s%s%s\n",
- ag->dev->name, label, intr,
- (intr & AG71XX_INT_TX_PS) ? "TXPS " : "",
- (intr & AG71XX_INT_TX_UR) ? "TXUR " : "",
- (intr & AG71XX_INT_TX_BE) ? "TXBE " : "",
- (intr & AG71XX_INT_RX_PR) ? "RXPR " : "",
- (intr & AG71XX_INT_RX_OF) ? "RXOF " : "",
- (intr & AG71XX_INT_RX_BE) ? "RXBE " : "");
-}
-
-static void ag71xx_ring_tx_clean(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->tx_ring;
- struct net_device *dev = ag->dev;
- int ring_mask = BIT(ring->order) - 1;
- u32 bytes_compl = 0, pkts_compl = 0;
-
- while (ring->curr != ring->dirty) {
- struct ag71xx_desc *desc;
- u32 i = ring->dirty & ring_mask;
-
- desc = ag71xx_ring_desc(ring, i);
- if (!ag71xx_desc_empty(desc)) {
- desc->ctrl = 0;
- dev->stats.tx_errors++;
- }
-
- if (ring->buf[i].skb) {
- bytes_compl += ring->buf[i].len;
- pkts_compl++;
- dev_kfree_skb_any(ring->buf[i].skb);
- }
- ring->buf[i].skb = NULL;
- ring->dirty++;
- }
-
- /* flush descriptors */
- wmb();
-
- netdev_completed_queue(dev, pkts_compl, bytes_compl);
-}
-
-static void ag71xx_ring_tx_init(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->tx_ring;
- int ring_size = BIT(ring->order);
- int ring_mask = BIT(ring->order) - 1;
- int i;
-
- for (i = 0; i < ring_size; i++) {
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
-
- desc->next = (u32) (ring->descs_dma +
- AG71XX_DESC_SIZE * ((i + 1) & ring_mask));
-
- desc->ctrl = DESC_EMPTY;
- ring->buf[i].skb = NULL;
- }
-
- /* flush descriptors */
- wmb();
-
- ring->curr = 0;
- ring->dirty = 0;
- netdev_reset_queue(ag->dev);
-}
-
-static void ag71xx_ring_rx_clean(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->rx_ring;
- int ring_size = BIT(ring->order);
- int i;
-
- if (!ring->buf)
- return;
-
- for (i = 0; i < ring_size; i++)
- if (ring->buf[i].rx_buf) {
- dma_unmap_single(&ag->pdev->dev, ring->buf[i].dma_addr,
- ag->rx_buf_size, DMA_FROM_DEVICE);
- skb_free_frag(ring->buf[i].rx_buf);
- }
-}
-
-static int ag71xx_buffer_offset(struct ag71xx *ag)
-{
- int offset = NET_SKB_PAD;
-
- /*
- * On AR71xx/AR91xx packets must be 4-byte aligned.
- *
- * When using builtin AR8216 support, hardware adds a 2-byte header,
- * so we don't need any extra alignment in that case.
- */
- if (!ag71xx_get_pdata(ag)->is_ar724x || ag71xx_has_ar8216(ag))
- return offset;
-
- return offset + NET_IP_ALIGN;
-}
-
-static int ag71xx_buffer_size(struct ag71xx *ag)
-{
- return ag->rx_buf_size +
- SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-}
-
-static bool ag71xx_fill_rx_buf(struct ag71xx *ag, struct ag71xx_buf *buf,
- int offset,
- void *(*alloc)(unsigned int size))
-{
- struct ag71xx_ring *ring = &ag->rx_ring;
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, buf - &ring->buf[0]);
- void *data;
-
- data = alloc(ag71xx_buffer_size(ag));
- if (!data)
- return false;
-
- buf->rx_buf = data;
- buf->dma_addr = dma_map_single(&ag->pdev->dev, data, ag->rx_buf_size,
- DMA_FROM_DEVICE);
- desc->data = (u32) buf->dma_addr + offset;
- return true;
-}
-
-static int ag71xx_ring_rx_init(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->rx_ring;
- int ring_size = BIT(ring->order);
- int ring_mask = BIT(ring->order) - 1;
- unsigned int i;
- int ret;
- int offset = ag71xx_buffer_offset(ag);
-
- ret = 0;
- for (i = 0; i < ring_size; i++) {
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
-
- desc->next = (u32) (ring->descs_dma +
- AG71XX_DESC_SIZE * ((i + 1) & ring_mask));
-
- DBG("ag71xx: RX desc at %p, next is %08x\n",
- desc, desc->next);
- }
-
- for (i = 0; i < ring_size; i++) {
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
-
- if (!ag71xx_fill_rx_buf(ag, &ring->buf[i], offset,
- netdev_alloc_frag)) {
- ret = -ENOMEM;
- break;
- }
-
- desc->ctrl = DESC_EMPTY;
- }
-
- /* flush descriptors */
- wmb();
-
- ring->curr = 0;
- ring->dirty = 0;
-
- return ret;
-}
-
-static int ag71xx_ring_rx_refill(struct ag71xx *ag)
-{
- struct ag71xx_ring *ring = &ag->rx_ring;
- int ring_mask = BIT(ring->order) - 1;
- unsigned int count;
- int offset = ag71xx_buffer_offset(ag);
-
- count = 0;
- for (; ring->curr - ring->dirty > 0; ring->dirty++) {
- struct ag71xx_desc *desc;
- unsigned int i;
-
- i = ring->dirty & ring_mask;
- desc = ag71xx_ring_desc(ring, i);
-
- if (!ring->buf[i].rx_buf &&
- !ag71xx_fill_rx_buf(ag, &ring->buf[i], offset,
- napi_alloc_frag))
- break;
-
- desc->ctrl = DESC_EMPTY;
- count++;
- }
-
- /* flush descriptors */
- wmb();
-
- DBG("%s: %u rx descriptors refilled\n", ag->dev->name, count);
-
- return count;
-}
-
-static int ag71xx_rings_init(struct ag71xx *ag)
-{
- struct ag71xx_ring *tx = &ag->tx_ring;
- struct ag71xx_ring *rx = &ag->rx_ring;
- int ring_size = BIT(tx->order) + BIT(rx->order);
- int tx_size = BIT(tx->order);
-
- tx->buf = kzalloc(ring_size * sizeof(*tx->buf), GFP_KERNEL);
- if (!tx->buf)
- return -ENOMEM;
-
- tx->descs_cpu = dma_alloc_coherent(&ag->pdev->dev, ring_size * AG71XX_DESC_SIZE,
- &tx->descs_dma, GFP_KERNEL);
- if (!tx->descs_cpu) {
- kfree(tx->buf);
- tx->buf = NULL;
- return -ENOMEM;
- }
-
- rx->buf = &tx->buf[tx_size];
- rx->descs_cpu = ((void *)tx->descs_cpu) + tx_size * AG71XX_DESC_SIZE;
- rx->descs_dma = tx->descs_dma + tx_size * AG71XX_DESC_SIZE;
-
- ag71xx_ring_tx_init(ag);
- return ag71xx_ring_rx_init(ag);
-}
-
-static void ag71xx_rings_free(struct ag71xx *ag)
-{
- struct ag71xx_ring *tx = &ag->tx_ring;
- struct ag71xx_ring *rx = &ag->rx_ring;
- int ring_size = BIT(tx->order) + BIT(rx->order);
-
- if (tx->descs_cpu)
- dma_free_coherent(&ag->pdev->dev, ring_size * AG71XX_DESC_SIZE,
- tx->descs_cpu, tx->descs_dma);
-
- kfree(tx->buf);
-
- tx->descs_cpu = NULL;
- rx->descs_cpu = NULL;
- tx->buf = NULL;
- rx->buf = NULL;
-}
-
-static void ag71xx_rings_cleanup(struct ag71xx *ag)
-{
- ag71xx_ring_rx_clean(ag);
- ag71xx_ring_tx_clean(ag);
- ag71xx_rings_free(ag);
-
- netdev_reset_queue(ag->dev);
-}
-
-static unsigned char *ag71xx_speed_str(struct ag71xx *ag)
-{
- switch (ag->speed) {
- case SPEED_1000:
- return "1000";
- case SPEED_100:
- return "100";
- case SPEED_10:
- return "10";
- }
-
- return "?";
-}
-
-static void ag71xx_hw_set_macaddr(struct ag71xx *ag, unsigned char *mac)
-{
- u32 t;
-
- t = (((u32) mac[5]) << 24) | (((u32) mac[4]) << 16)
- | (((u32) mac[3]) << 8) | ((u32) mac[2]);
-
- ag71xx_wr(ag, AG71XX_REG_MAC_ADDR1, t);
-
- t = (((u32) mac[1]) << 24) | (((u32) mac[0]) << 16);
- ag71xx_wr(ag, AG71XX_REG_MAC_ADDR2, t);
-}
-
-static void ag71xx_dma_reset(struct ag71xx *ag)
-{
- u32 val;
- int i;
-
- ag71xx_dump_dma_regs(ag);
-
- /* stop RX and TX */
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
- ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
-
- /*
- * give the hardware some time to really stop all rx/tx activity
- * clearing the descriptors too early causes random memory corruption
- */
- mdelay(1);
-
- /* clear descriptor addresses */
- ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->stop_desc_dma);
- ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->stop_desc_dma);
-
- /* clear pending RX/TX interrupts */
- for (i = 0; i < 256; i++) {
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
- }
-
- /* clear pending errors */
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE | RX_STATUS_OF);
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE | TX_STATUS_UR);
-
- val = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
- if (val)
- pr_alert("%s: unable to clear DMA Rx status: %08x\n",
- ag->dev->name, val);
-
- val = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
-
- /* mask out reserved bits */
- val &= ~0xff000000;
-
- if (val)
- pr_alert("%s: unable to clear DMA Tx status: %08x\n",
- ag->dev->name, val);
-
- ag71xx_dump_dma_regs(ag);
-}
-
-#define MAC_CFG1_INIT (MAC_CFG1_RXE | MAC_CFG1_TXE | \
- MAC_CFG1_SRX | MAC_CFG1_STX)
-
-#define FIFO_CFG0_INIT (FIFO_CFG0_ALL << FIFO_CFG0_ENABLE_SHIFT)
-
-#define FIFO_CFG4_INIT (FIFO_CFG4_DE | FIFO_CFG4_DV | FIFO_CFG4_FC | \
- FIFO_CFG4_CE | FIFO_CFG4_CR | FIFO_CFG4_LM | \
- FIFO_CFG4_LO | FIFO_CFG4_OK | FIFO_CFG4_MC | \
- FIFO_CFG4_BC | FIFO_CFG4_DR | FIFO_CFG4_LE | \
- FIFO_CFG4_CF | FIFO_CFG4_PF | FIFO_CFG4_UO | \
- FIFO_CFG4_VT)
-
-#define FIFO_CFG5_INIT (FIFO_CFG5_DE | FIFO_CFG5_DV | FIFO_CFG5_FC | \
- FIFO_CFG5_CE | FIFO_CFG5_LO | FIFO_CFG5_OK | \
- FIFO_CFG5_MC | FIFO_CFG5_BC | FIFO_CFG5_DR | \
- FIFO_CFG5_CF | FIFO_CFG5_PF | FIFO_CFG5_VT | \
- FIFO_CFG5_LE | FIFO_CFG5_FT | FIFO_CFG5_16 | \
- FIFO_CFG5_17 | FIFO_CFG5_SF)
-
-static void ag71xx_hw_stop(struct ag71xx *ag)
-{
- /* disable all interrupts and stop the rx/tx engine */
- ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, 0);
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, 0);
- ag71xx_wr(ag, AG71XX_REG_TX_CTRL, 0);
-}
-
-static void ag71xx_hw_setup(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- u32 init = MAC_CFG1_INIT;
-
- /* setup MAC configuration registers */
- if (pdata->use_flow_control)
- init |= MAC_CFG1_TFC | MAC_CFG1_RFC;
- ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, init);
-
- ag71xx_sb(ag, AG71XX_REG_MAC_CFG2,
- MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK);
-
- /* setup max frame length to zero */
- ag71xx_wr(ag, AG71XX_REG_MAC_MFL, 0);
-
- /* setup FIFO configuration registers */
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG0, FIFO_CFG0_INIT);
- if (pdata->is_ar724x) {
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0010ffff);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x015500aa);
- } else {
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG1, 0x0fff0000);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG2, 0x00001fff);
- }
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG4, FIFO_CFG4_INIT);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, FIFO_CFG5_INIT);
-}
-
-static void ag71xx_hw_init(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- u32 reset_mask = pdata->reset_bit;
-
- ag71xx_hw_stop(ag);
-
- if (pdata->is_ar724x) {
- u32 reset_phy = reset_mask;
-
- reset_phy &= AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY;
- reset_mask &= ~(AR71XX_RESET_GE0_PHY | AR71XX_RESET_GE1_PHY);
-
- ath79_device_reset_set(reset_phy);
- msleep(50);
- ath79_device_reset_clear(reset_phy);
- msleep(200);
- }
-
- ag71xx_sb(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_SR);
- udelay(20);
-
- ath79_device_reset_set(reset_mask);
- msleep(100);
- ath79_device_reset_clear(reset_mask);
- msleep(200);
-
- ag71xx_hw_setup(ag);
-
- ag71xx_dma_reset(ag);
-}
-
-static void ag71xx_fast_reset(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- struct net_device *dev = ag->dev;
- u32 reset_mask = pdata->reset_bit;
- u32 rx_ds;
- u32 mii_reg;
-
- reset_mask &= AR71XX_RESET_GE0_MAC | AR71XX_RESET_GE1_MAC;
-
- ag71xx_hw_stop(ag);
- wmb();
-
- mii_reg = ag71xx_rr(ag, AG71XX_REG_MII_CFG);
- rx_ds = ag71xx_rr(ag, AG71XX_REG_RX_DESC);
-
- ag71xx_tx_packets(ag, true);
-
- ath79_device_reset_set(reset_mask);
- udelay(10);
- ath79_device_reset_clear(reset_mask);
- udelay(10);
-
- ag71xx_dma_reset(ag);
- ag71xx_hw_setup(ag);
- ag->tx_ring.curr = 0;
- ag->tx_ring.dirty = 0;
- netdev_reset_queue(ag->dev);
-
- /* setup max frame length */
- ag71xx_wr(ag, AG71XX_REG_MAC_MFL,
- ag71xx_max_frame_len(ag->dev->mtu));
-
- ag71xx_wr(ag, AG71XX_REG_RX_DESC, rx_ds);
- ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma);
- ag71xx_wr(ag, AG71XX_REG_MII_CFG, mii_reg);
-
- ag71xx_hw_set_macaddr(ag, dev->dev_addr);
-}
-
-static void ag71xx_hw_start(struct ag71xx *ag)
-{
- /* start RX engine */
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
-
- /* enable interrupts */
- ag71xx_wr(ag, AG71XX_REG_INT_ENABLE, AG71XX_INT_INIT);
-
- netif_wake_queue(ag->dev);
-}
-
-static void
-__ag71xx_link_adjust(struct ag71xx *ag, bool update)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- u32 cfg2;
- u32 ifctl;
- u32 fifo5;
- u32 fifo3;
-
- if (!ag->link && update) {
- ag71xx_hw_stop(ag);
- netif_carrier_off(ag->dev);
- if (netif_msg_link(ag))
- pr_info("%s: link down\n", ag->dev->name);
- return;
- }
-
- if (pdata->is_ar724x)
- ag71xx_fast_reset(ag);
-
- cfg2 = ag71xx_rr(ag, AG71XX_REG_MAC_CFG2);
- cfg2 &= ~(MAC_CFG2_IF_1000 | MAC_CFG2_IF_10_100 | MAC_CFG2_FDX);
- cfg2 |= (ag->duplex) ? MAC_CFG2_FDX : 0;
-
- ifctl = ag71xx_rr(ag, AG71XX_REG_MAC_IFCTL);
- ifctl &= ~(MAC_IFCTL_SPEED);
-
- fifo5 = ag71xx_rr(ag, AG71XX_REG_FIFO_CFG5);
- fifo5 &= ~FIFO_CFG5_BM;
-
- switch (ag->speed) {
- case SPEED_1000:
- cfg2 |= MAC_CFG2_IF_1000;
- fifo5 |= FIFO_CFG5_BM;
- break;
- case SPEED_100:
- cfg2 |= MAC_CFG2_IF_10_100;
- ifctl |= MAC_IFCTL_SPEED;
- break;
- case SPEED_10:
- cfg2 |= MAC_CFG2_IF_10_100;
- break;
- default:
- BUG();
- return;
- }
-
- if (pdata->is_ar91xx)
- fifo3 = 0x00780fff;
- else if (pdata->is_ar724x)
- fifo3 = 0x01f00140;
- else
- fifo3 = 0x008001ff;
-
- if (ag->tx_ring.desc_split) {
- fifo3 &= 0xffff;
- fifo3 |= ((2048 - ag->tx_ring.desc_split) / 4) << 16;
- }
-
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG3, fifo3);
-
- if (update && pdata->set_speed)
- pdata->set_speed(ag->speed);
-
- if (update && pdata->enable_sgmii_fixup)
- ag71xx_qca955x_sgmii_init();
-
- ag71xx_wr(ag, AG71XX_REG_MAC_CFG2, cfg2);
- ag71xx_wr(ag, AG71XX_REG_FIFO_CFG5, fifo5);
- ag71xx_wr(ag, AG71XX_REG_MAC_IFCTL, ifctl);
-
- if (pdata->disable_inline_checksum_engine) {
- /*
- * The rx ring buffer can stall on small packets on QCA953x and
- * QCA956x. Disabling the inline checksum engine fixes the stall.
- * The wr, rr functions cannot be used since this hidden register
- * is outside of the normal ag71xx register block.
- */
- void __iomem *dam = ioremap_nocache(0xb90001bc, 0x4);
- if (dam) {
- __raw_writel(__raw_readl(dam) & ~BIT(27), dam);
- (void)__raw_readl(dam);
- iounmap(dam);
- }
- }
-
- ag71xx_hw_start(ag);
-
- netif_carrier_on(ag->dev);
- if (update && netif_msg_link(ag))
- pr_info("%s: link up (%sMbps/%s duplex)\n",
- ag->dev->name,
- ag71xx_speed_str(ag),
- (DUPLEX_FULL == ag->duplex) ? "Full" : "Half");
-
- ag71xx_dump_regs(ag);
-}
-
-void ag71xx_link_adjust(struct ag71xx *ag)
-{
- __ag71xx_link_adjust(ag, true);
-}
-
-static int ag71xx_hw_enable(struct ag71xx *ag)
-{
- int ret;
-
- ret = ag71xx_rings_init(ag);
- if (ret)
- return ret;
-
- napi_enable(&ag->napi);
- ag71xx_wr(ag, AG71XX_REG_TX_DESC, ag->tx_ring.descs_dma);
- ag71xx_wr(ag, AG71XX_REG_RX_DESC, ag->rx_ring.descs_dma);
- netif_start_queue(ag->dev);
-
- return 0;
-}
-
-static void ag71xx_hw_disable(struct ag71xx *ag)
-{
- netif_stop_queue(ag->dev);
-
- ag71xx_hw_stop(ag);
- ag71xx_dma_reset(ag);
-
- napi_disable(&ag->napi);
- del_timer_sync(&ag->oom_timer);
-
- ag71xx_rings_cleanup(ag);
-}
-
-static int ag71xx_open(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
- unsigned int max_frame_len;
- int ret;
-
- netif_carrier_off(dev);
- max_frame_len = ag71xx_max_frame_len(dev->mtu);
- ag->rx_buf_size = SKB_DATA_ALIGN(max_frame_len + NET_SKB_PAD + NET_IP_ALIGN);
-
- /* setup max frame length */
- ag71xx_wr(ag, AG71XX_REG_MAC_MFL, max_frame_len);
- ag71xx_hw_set_macaddr(ag, dev->dev_addr);
-
- ret = ag71xx_hw_enable(ag);
- if (ret)
- goto err;
-
- ag71xx_phy_start(ag);
-
- return 0;
-
-err:
- ag71xx_rings_cleanup(ag);
- return ret;
-}
-
-static int ag71xx_stop(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- netif_carrier_off(dev);
- ag71xx_phy_stop(ag);
- ag71xx_hw_disable(ag);
-
- return 0;
-}
-
-static int ag71xx_fill_dma_desc(struct ag71xx_ring *ring, u32 addr, int len)
-{
- int i;
- struct ag71xx_desc *desc;
- int ring_mask = BIT(ring->order) - 1;
- int ndesc = 0;
- int split = ring->desc_split;
-
- if (!split)
- split = len;
-
- while (len > 0) {
- unsigned int cur_len = len;
-
- i = (ring->curr + ndesc) & ring_mask;
- desc = ag71xx_ring_desc(ring, i);
-
- if (!ag71xx_desc_empty(desc))
- return -1;
-
- if (cur_len > split) {
- cur_len = split;
-
- /*
- * TX will hang if DMA transfers <= 4 bytes,
- * make sure next segment is more than 4 bytes long.
- */
- if (len <= split + 4)
- cur_len -= 4;
- }
-
- desc->data = addr;
- addr += cur_len;
- len -= cur_len;
-
- if (len > 0)
- cur_len |= DESC_MORE;
-
- /* prevent early tx attempt of this descriptor */
- if (!ndesc)
- cur_len |= DESC_EMPTY;
-
- desc->ctrl = cur_len;
- ndesc++;
- }
-
- return ndesc;
-}
-
-static netdev_tx_t ag71xx_hard_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
- struct ag71xx_ring *ring = &ag->tx_ring;
- int ring_mask = BIT(ring->order) - 1;
- int ring_size = BIT(ring->order);
- struct ag71xx_desc *desc;
- dma_addr_t dma_addr;
- int i, n, ring_min;
-
- if (ag71xx_has_ar8216(ag))
- ag71xx_add_ar8216_header(ag, skb);
-
- if (skb->len <= 4) {
- DBG("%s: packet len is too small\n", ag->dev->name);
- goto err_drop;
- }
-
- dma_addr = dma_map_single(&ag->pdev->dev, skb->data, skb->len,
- DMA_TO_DEVICE);
-
- i = ring->curr & ring_mask;
- desc = ag71xx_ring_desc(ring, i);
-
- /* setup descriptor fields */
- n = ag71xx_fill_dma_desc(ring, (u32) dma_addr, skb->len & ag->desc_pktlen_mask);
- if (n < 0)
- goto err_drop_unmap;
-
- i = (ring->curr + n - 1) & ring_mask;
- ring->buf[i].len = skb->len;
- ring->buf[i].skb = skb;
-
- netdev_sent_queue(dev, skb->len);
-
- skb_tx_timestamp(skb);
-
- desc->ctrl &= ~DESC_EMPTY;
- ring->curr += n;
-
- /* flush descriptor */
- wmb();
-
- ring_min = 2;
- if (ring->desc_split)
- ring_min *= AG71XX_TX_RING_DS_PER_PKT;
-
- if (ring->curr - ring->dirty >= ring_size - ring_min) {
- DBG("%s: tx queue full\n", dev->name);
- netif_stop_queue(dev);
- }
-
- DBG("%s: packet injected into TX queue\n", ag->dev->name);
-
- /* enable TX engine */
- ag71xx_wr(ag, AG71XX_REG_TX_CTRL, TX_CTRL_TXE);
-
- return NETDEV_TX_OK;
-
-err_drop_unmap:
- dma_unmap_single(&ag->pdev->dev, dma_addr, skb->len, DMA_TO_DEVICE);
-
-err_drop:
- dev->stats.tx_dropped++;
-
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
-}
-
-static int ag71xx_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- switch (cmd) {
- case SIOCSIFHWADDR:
- if (copy_from_user
- (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
- return -EFAULT;
- return 0;
-
- case SIOCGIFHWADDR:
- if (copy_to_user
- (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
- return -EFAULT;
- return 0;
-
- case SIOCGMIIPHY:
- case SIOCGMIIREG:
- case SIOCSMIIREG:
- if (ag->phy_dev == NULL)
- break;
-
- return phy_mii_ioctl(ag->phy_dev, ifr, cmd);
-
- default:
- break;
- }
-
- return -EOPNOTSUPP;
-}
-
-static void ag71xx_oom_timer_handler(unsigned long data)
-{
- struct net_device *dev = (struct net_device *) data;
- struct ag71xx *ag = netdev_priv(dev);
-
- napi_schedule(&ag->napi);
-}
-
-static void ag71xx_tx_timeout(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
-
- if (netif_msg_tx_err(ag))
- pr_info("%s: tx timeout\n", ag->dev->name);
-
- schedule_delayed_work(&ag->restart_work, 1);
-}
-
-static void ag71xx_bit_set(void __iomem *reg, u32 bit)
-{
- u32 val = __raw_readl(reg) | bit;
- __raw_writel(val, reg);
- __raw_readl(reg);
-}
-
-static void ag71xx_bit_clear(void __iomem *reg, u32 bit)
-{
- u32 val = __raw_readl(reg) & ~bit;
- __raw_writel(val, reg);
- __raw_readl(reg);
-}
-
-static void ag71xx_qca955x_sgmii_init()
-{
- void __iomem *gmac_base;
- u32 mr_an_status, sgmii_status;
- u8 tries = 0;
-
- gmac_base = ioremap_nocache(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
-
- if (!gmac_base)
- goto sgmii_out;
-
- mr_an_status = __raw_readl(gmac_base + QCA955X_GMAC_REG_MR_AN_STATUS);
- if (!(mr_an_status & QCA955X_MR_AN_STATUS_AN_ABILITY))
- goto sgmii_out;
-
- __raw_writel(QCA955X_SGMII_RESET_RX_CLK_N_RESET ,
- gmac_base + QCA955X_GMAC_REG_SGMII_RESET);
- __raw_readl(gmac_base + QCA955X_GMAC_REG_SGMII_RESET);
- udelay(10);
-
- /* Init sequence */
- ag71xx_bit_set(gmac_base + QCA955X_GMAC_REG_SGMII_RESET,
- QCA955X_SGMII_RESET_HW_RX_125M_N);
- udelay(10);
-
- ag71xx_bit_set(gmac_base + QCA955X_GMAC_REG_SGMII_RESET,
- QCA955X_SGMII_RESET_RX_125M_N);
- udelay(10);
-
- ag71xx_bit_set(gmac_base + QCA955X_GMAC_REG_SGMII_RESET,
- QCA955X_SGMII_RESET_TX_125M_N);
- udelay(10);
-
- ag71xx_bit_set(gmac_base + QCA955X_GMAC_REG_SGMII_RESET,
- QCA955X_SGMII_RESET_RX_CLK_N);
- udelay(10);
-
- ag71xx_bit_set(gmac_base + QCA955X_GMAC_REG_SGMII_RESET,
- QCA955X_SGMII_RESET_TX_CLK_N);
- udelay(10);
-
- do {
- ag71xx_bit_set(gmac_base + QCA955X_GMAC_REG_MR_AN_CONTROL,
- QCA955X_MR_AN_CONTROL_PHY_RESET |
- QCA955X_MR_AN_CONTROL_AN_ENABLE);
- udelay(100);
- ag71xx_bit_clear(gmac_base + QCA955X_GMAC_REG_MR_AN_CONTROL,
- QCA955X_MR_AN_CONTROL_PHY_RESET);
- mdelay(10);
- sgmii_status = __raw_readl(gmac_base + QCA955X_GMAC_REG_SGMII_DEBUG) & 0xF;
-
- if (tries++ >= QCA955X_SGMII_LINK_WAR_MAX_TRY) {
- pr_warn("ag71xx: max retries for SGMII fixup exceeded!\n");
- break;
- }
- } while (!(sgmii_status == 0xf || sgmii_status == 0x10));
-
-sgmii_out:
- iounmap(gmac_base);
-}
-
-static void ag71xx_restart_work_func(struct work_struct *work)
-{
- struct ag71xx *ag = container_of(work, struct ag71xx, restart_work.work);
-
- rtnl_lock();
- ag71xx_hw_disable(ag);
- ag71xx_hw_enable(ag);
- if (ag->link)
- __ag71xx_link_adjust(ag, false);
- rtnl_unlock();
-}
-
-static bool ag71xx_check_dma_stuck(struct ag71xx *ag)
-{
- unsigned long timestamp;
- u32 rx_sm, tx_sm, rx_fd;
-
- timestamp = netdev_get_tx_queue(ag->dev, 0)->trans_start;
- if (likely(time_before(jiffies, timestamp + HZ/10)))
- return false;
-
- if (!netif_carrier_ok(ag->dev))
- return false;
-
- rx_sm = ag71xx_rr(ag, AG71XX_REG_RX_SM);
- if ((rx_sm & 0x7) == 0x3 && ((rx_sm >> 4) & 0x7) == 0x6)
- return true;
-
- tx_sm = ag71xx_rr(ag, AG71XX_REG_TX_SM);
- rx_fd = ag71xx_rr(ag, AG71XX_REG_FIFO_DEPTH);
- if (((tx_sm >> 4) & 0x7) == 0 && ((rx_sm & 0x7) == 0) &&
- ((rx_sm >> 4) & 0x7) == 0 && rx_fd == 0)
- return true;
-
- return false;
-}
-
-static int ag71xx_tx_packets(struct ag71xx *ag, bool flush)
-{
- struct ag71xx_ring *ring = &ag->tx_ring;
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- bool dma_stuck = false;
- int ring_mask = BIT(ring->order) - 1;
- int ring_size = BIT(ring->order);
- int sent = 0;
- int bytes_compl = 0;
- int n = 0;
-
- DBG("%s: processing TX ring\n", ag->dev->name);
-
- while (ring->dirty + n != ring->curr) {
- unsigned int i = (ring->dirty + n) & ring_mask;
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
- struct sk_buff *skb = ring->buf[i].skb;
-
- if (!flush && !ag71xx_desc_empty(desc)) {
- if (pdata->is_ar724x &&
- ag71xx_check_dma_stuck(ag)) {
- schedule_delayed_work(&ag->restart_work, HZ / 2);
- dma_stuck = true;
- }
- break;
- }
-
- if (flush)
- desc->ctrl |= DESC_EMPTY;
-
- n++;
- if (!skb)
- continue;
-
- dev_kfree_skb_any(skb);
- ring->buf[i].skb = NULL;
-
- bytes_compl += ring->buf[i].len;
-
- sent++;
- ring->dirty += n;
-
- while (n > 0) {
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_PS);
- n--;
- }
- }
-
- DBG("%s: %d packets sent out\n", ag->dev->name, sent);
-
- if (!sent)
- return 0;
-
- ag->dev->stats.tx_bytes += bytes_compl;
- ag->dev->stats.tx_packets += sent;
-
- netdev_completed_queue(ag->dev, sent, bytes_compl);
- if ((ring->curr - ring->dirty) < (ring_size * 3) / 4)
- netif_wake_queue(ag->dev);
-
- if (!dma_stuck)
- cancel_delayed_work(&ag->restart_work);
-
- return sent;
-}
-
-static int ag71xx_rx_packets(struct ag71xx *ag, int limit)
-{
- struct net_device *dev = ag->dev;
- struct ag71xx_ring *ring = &ag->rx_ring;
- int offset = ag71xx_buffer_offset(ag);
- unsigned int pktlen_mask = ag->desc_pktlen_mask;
- int ring_mask = BIT(ring->order) - 1;
- int ring_size = BIT(ring->order);
- struct sk_buff_head queue;
- struct sk_buff *skb;
- int done = 0;
-
- DBG("%s: rx packets, limit=%d, curr=%u, dirty=%u\n",
- dev->name, limit, ring->curr, ring->dirty);
-
- skb_queue_head_init(&queue);
-
- while (done < limit) {
- unsigned int i = ring->curr & ring_mask;
- struct ag71xx_desc *desc = ag71xx_ring_desc(ring, i);
- int pktlen;
- int err = 0;
-
- if (ag71xx_desc_empty(desc))
- break;
-
- if ((ring->dirty + ring_size) == ring->curr) {
- ag71xx_assert(0);
- break;
- }
-
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_PR);
-
- pktlen = desc->ctrl & pktlen_mask;
- pktlen -= ETH_FCS_LEN;
-
- dma_unmap_single(&ag->pdev->dev, ring->buf[i].dma_addr,
- ag->rx_buf_size, DMA_FROM_DEVICE);
-
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += pktlen;
-
- skb = build_skb(ring->buf[i].rx_buf, ag71xx_buffer_size(ag));
- if (!skb) {
- skb_free_frag(ring->buf[i].rx_buf);
- goto next;
- }
-
- skb_reserve(skb, offset);
- skb_put(skb, pktlen);
-
- if (ag71xx_has_ar8216(ag))
- err = ag71xx_remove_ar8216_header(ag, skb, pktlen);
-
- if (err) {
- dev->stats.rx_dropped++;
- kfree_skb(skb);
- } else {
- skb->dev = dev;
- skb->ip_summed = CHECKSUM_NONE;
- __skb_queue_tail(&queue, skb);
- }
-
-next:
- ring->buf[i].rx_buf = NULL;
- done++;
-
- ring->curr++;
- }
-
- ag71xx_ring_rx_refill(ag);
-
- while ((skb = __skb_dequeue(&queue)) != NULL) {
- skb->protocol = eth_type_trans(skb, dev);
- netif_receive_skb(skb);
- }
-
- DBG("%s: rx finish, curr=%u, dirty=%u, done=%d\n",
- dev->name, ring->curr, ring->dirty, done);
-
- return done;
-}
-
-static int ag71xx_poll(struct napi_struct *napi, int limit)
-{
- struct ag71xx *ag = container_of(napi, struct ag71xx, napi);
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- struct net_device *dev = ag->dev;
- struct ag71xx_ring *rx_ring = &ag->rx_ring;
- int rx_ring_size = BIT(rx_ring->order);
- unsigned long flags;
- u32 status;
- int tx_done;
- int rx_done;
-
- pdata->ddr_flush();
- tx_done = ag71xx_tx_packets(ag, false);
-
- DBG("%s: processing RX ring\n", dev->name);
- rx_done = ag71xx_rx_packets(ag, limit);
-
- ag71xx_debugfs_update_napi_stats(ag, rx_done, tx_done);
-
- if (rx_ring->buf[rx_ring->dirty % rx_ring_size].rx_buf == NULL)
- goto oom;
-
- status = ag71xx_rr(ag, AG71XX_REG_RX_STATUS);
- if (unlikely(status & RX_STATUS_OF)) {
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_OF);
- dev->stats.rx_fifo_errors++;
-
- /* restart RX */
- ag71xx_wr(ag, AG71XX_REG_RX_CTRL, RX_CTRL_RXE);
- }
-
- if (rx_done < limit) {
- if (status & RX_STATUS_PR)
- goto more;
-
- status = ag71xx_rr(ag, AG71XX_REG_TX_STATUS);
- if (status & TX_STATUS_PS)
- goto more;
-
- DBG("%s: disable polling mode, rx=%d, tx=%d,limit=%d\n",
- dev->name, rx_done, tx_done, limit);
-
- napi_complete(napi);
-
- /* enable interrupts */
- spin_lock_irqsave(&ag->lock, flags);
- ag71xx_int_enable(ag, AG71XX_INT_POLL);
- spin_unlock_irqrestore(&ag->lock, flags);
- return rx_done;
- }
-
-more:
- DBG("%s: stay in polling mode, rx=%d, tx=%d, limit=%d\n",
- dev->name, rx_done, tx_done, limit);
- return limit;
-
-oom:
- if (netif_msg_rx_err(ag))
- pr_info("%s: out of memory\n", dev->name);
-
- mod_timer(&ag->oom_timer, jiffies + AG71XX_OOM_REFILL);
- napi_complete(napi);
- return 0;
-}
-
-static irqreturn_t ag71xx_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct ag71xx *ag = netdev_priv(dev);
- u32 status;
-
- status = ag71xx_rr(ag, AG71XX_REG_INT_STATUS);
- ag71xx_dump_intr(ag, "raw", status);
-
- if (unlikely(!status))
- return IRQ_NONE;
-
- if (unlikely(status & AG71XX_INT_ERR)) {
- if (status & AG71XX_INT_TX_BE) {
- ag71xx_wr(ag, AG71XX_REG_TX_STATUS, TX_STATUS_BE);
- dev_err(&dev->dev, "TX BUS error\n");
- }
- if (status & AG71XX_INT_RX_BE) {
- ag71xx_wr(ag, AG71XX_REG_RX_STATUS, RX_STATUS_BE);
- dev_err(&dev->dev, "RX BUS error\n");
- }
- }
-
- if (likely(status & AG71XX_INT_POLL)) {
- ag71xx_int_disable(ag, AG71XX_INT_POLL);
- DBG("%s: enable polling mode\n", dev->name);
- napi_schedule(&ag->napi);
- }
-
- ag71xx_debugfs_update_int_stats(ag, status);
-
- return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling 'interrupt' - used by things like netconsole to send skbs
- * without having to re-enable interrupts. It's not called while
- * the interrupt routine is executing.
- */
-static void ag71xx_netpoll(struct net_device *dev)
-{
- disable_irq(dev->irq);
- ag71xx_interrupt(dev->irq, dev);
- enable_irq(dev->irq);
-}
-#endif
-
-static int ag71xx_change_mtu(struct net_device *dev, int new_mtu)
-{
- struct ag71xx *ag = netdev_priv(dev);
- unsigned int max_frame_len;
-
- max_frame_len = ag71xx_max_frame_len(new_mtu);
- if (new_mtu < 68 || max_frame_len > ag->max_frame_len)
- return -EINVAL;
-
- if (netif_running(dev))
- return -EBUSY;
-
- dev->mtu = new_mtu;
- ag71xx_wr(ag, AG71XX_REG_MAC_MFL,
- ag71xx_max_frame_len(dev->mtu));
-
- return 0;
-}
-
-static const struct net_device_ops ag71xx_netdev_ops = {
- .ndo_open = ag71xx_open,
- .ndo_stop = ag71xx_stop,
- .ndo_start_xmit = ag71xx_hard_start_xmit,
- .ndo_do_ioctl = ag71xx_do_ioctl,
- .ndo_tx_timeout = ag71xx_tx_timeout,
- .ndo_change_mtu = ag71xx_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ag71xx_netpoll,
-#endif
-};
-
-static int ag71xx_probe(struct platform_device *pdev)
-{
- struct net_device *dev;
- struct resource *res;
- struct ag71xx *ag;
- struct ag71xx_platform_data *pdata;
- int tx_size, err;
-
- pdata = pdev->dev.platform_data;
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data specified\n");
- return -ENXIO;
-
- }
-
- if (pdata->mii_bus_dev == NULL && pdata->phy_mask) {
- dev_err(&pdev->dev, "no MII bus device specified\n");
- return -EINVAL;
- }
-
- dev = devm_alloc_etherdev(&pdev->dev, sizeof(*ag));
- if (!dev)
- return -ENOMEM;
-
- if (!pdata->max_frame_len || !pdata->desc_pktlen_mask)
- return -EINVAL;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -EINVAL;
-
- SET_NETDEV_DEV(dev, &pdev->dev);
-
- ag = netdev_priv(dev);
- ag->pdev = pdev;
- ag->dev = dev;
- ag->msg_enable = netif_msg_init(ag71xx_msg_level,
- AG71XX_DEFAULT_MSG_ENABLE);
- spin_lock_init(&ag->lock);
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mac_base");
- if (!res) {
- dev_err(&pdev->dev, "no mac_base resource found\n");
- return -ENXIO;
- }
-
- ag->mac_base = devm_ioremap_nocache(&pdev->dev, res->start,
- res->end - res->start + 1);
- if (!ag->mac_base)
- return -ENOMEM;
-
- dev->irq = platform_get_irq(pdev, 0);
- err = devm_request_irq(&pdev->dev, dev->irq, ag71xx_interrupt,
- 0x0, dev_name(&pdev->dev), dev);
- if (err) {
- dev_err(&pdev->dev, "unable to request IRQ %d\n", dev->irq);
- return err;
- }
-
- dev->base_addr = (unsigned long)ag->mac_base;
- dev->netdev_ops = &ag71xx_netdev_ops;
- dev->ethtool_ops = &ag71xx_ethtool_ops;
-
- INIT_DELAYED_WORK(&ag->restart_work, ag71xx_restart_work_func);
-
- init_timer(&ag->oom_timer);
- ag->oom_timer.data = (unsigned long) dev;
- ag->oom_timer.function = ag71xx_oom_timer_handler;
-
- tx_size = AG71XX_TX_RING_SIZE_DEFAULT;
- ag->rx_ring.order = ag71xx_ring_size_order(AG71XX_RX_RING_SIZE_DEFAULT);
-
- ag->max_frame_len = pdata->max_frame_len;
- ag->desc_pktlen_mask = pdata->desc_pktlen_mask;
-
- if (!pdata->is_ar724x && !pdata->is_ar91xx) {
- ag->tx_ring.desc_split = AG71XX_TX_RING_SPLIT;
- tx_size *= AG71XX_TX_RING_DS_PER_PKT;
- }
- ag->tx_ring.order = ag71xx_ring_size_order(tx_size);
-
- ag->stop_desc = dmam_alloc_coherent(&pdev->dev,
- sizeof(struct ag71xx_desc),
- &ag->stop_desc_dma, GFP_KERNEL);
-
- if (!ag->stop_desc)
- return -ENOMEM;
-
- ag->stop_desc->data = 0;
- ag->stop_desc->ctrl = 0;
- ag->stop_desc->next = (u32) ag->stop_desc_dma;
-
- memcpy(dev->dev_addr, pdata->mac_addr, ETH_ALEN);
-
- netif_napi_add(dev, &ag->napi, ag71xx_poll, AG71XX_NAPI_WEIGHT);
-
- ag71xx_dump_regs(ag);
-
- ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, 0);
-
- ag71xx_hw_init(ag);
-
- ag71xx_dump_regs(ag);
-
- err = ag71xx_phy_connect(ag);
- if (err)
- return err;
-
- err = ag71xx_debugfs_init(ag);
- if (err)
- goto err_phy_disconnect;
-
- platform_set_drvdata(pdev, dev);
-
- err = register_netdev(dev);
- if (err) {
- dev_err(&pdev->dev, "unable to register net device\n");
- platform_set_drvdata(pdev, NULL);
- ag71xx_debugfs_exit(ag);
- goto err_phy_disconnect;
- }
-
- pr_info("%s: Atheros AG71xx at 0x%08lx, irq %d, mode: %s\n",
- dev->name, (unsigned long) ag->mac_base, dev->irq,
- phy_modes(pdata->phy_if_mode));
-
- return 0;
-
-err_phy_disconnect:
- ag71xx_phy_disconnect(ag);
- return err;
-}
-
-static int ag71xx_remove(struct platform_device *pdev)
-{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct ag71xx *ag;
-
- if (!dev)
- return 0;
-
- ag = netdev_priv(dev);
- ag71xx_debugfs_exit(ag);
- ag71xx_phy_disconnect(ag);
- unregister_netdev(dev);
- platform_set_drvdata(pdev, NULL);
- return 0;
-}
-
-static struct platform_driver ag71xx_driver = {
- .probe = ag71xx_probe,
- .remove = ag71xx_remove,
- .driver = {
- .name = AG71XX_DRV_NAME,
- }
-};
-
-static int __init ag71xx_module_init(void)
-{
- int ret;
-
- ret = ag71xx_debugfs_root_init();
- if (ret)
- goto err_out;
-
- ret = ag71xx_mdio_driver_init();
- if (ret)
- goto err_debugfs_exit;
-
- ret = platform_driver_register(&ag71xx_driver);
- if (ret)
- goto err_mdio_exit;
-
- return 0;
-
-err_mdio_exit:
- ag71xx_mdio_driver_exit();
-err_debugfs_exit:
- ag71xx_debugfs_root_exit();
-err_out:
- return ret;
-}
-
-static void __exit ag71xx_module_exit(void)
-{
- platform_driver_unregister(&ag71xx_driver);
- ag71xx_mdio_driver_exit();
- ag71xx_debugfs_root_exit();
-}
-
-module_init(ag71xx_module_init);
-module_exit(ag71xx_module_exit);
-
-MODULE_VERSION(AG71XX_DRV_VERSION);
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_AUTHOR("Imre Kaloz <kaloz@openwrt.org>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" AG71XX_DRV_NAME);
diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c
deleted file mode 100644
index cf41aa8a3f..0000000000
--- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "ag71xx.h"
-
-#define AG71XX_MDIO_RETRY 1000
-#define AG71XX_MDIO_DELAY 5
-
-static inline void ag71xx_mdio_wr(struct ag71xx_mdio *am, unsigned reg,
- u32 value)
-{
- void __iomem *r;
-
- r = am->mdio_base + reg;
- __raw_writel(value, r);
-
- /* flush write */
- (void) __raw_readl(r);
-}
-
-static inline u32 ag71xx_mdio_rr(struct ag71xx_mdio *am, unsigned reg)
-{
- return __raw_readl(am->mdio_base + reg);
-}
-
-static void ag71xx_mdio_dump_regs(struct ag71xx_mdio *am)
-{
- DBG("%s: mii_cfg=%08x, mii_cmd=%08x, mii_addr=%08x\n",
- am->mii_bus->name,
- ag71xx_mdio_rr(am, AG71XX_REG_MII_CFG),
- ag71xx_mdio_rr(am, AG71XX_REG_MII_CMD),
- ag71xx_mdio_rr(am, AG71XX_REG_MII_ADDR));
- DBG("%s: mii_ctrl=%08x, mii_status=%08x, mii_ind=%08x\n",
- am->mii_bus->name,
- ag71xx_mdio_rr(am, AG71XX_REG_MII_CTRL),
- ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS),
- ag71xx_mdio_rr(am, AG71XX_REG_MII_IND));
-}
-
-static int ag71xx_mdio_wait_busy(struct ag71xx_mdio *am)
-{
- int i;
-
- for (i = 0; i < AG71XX_MDIO_RETRY; i++) {
- u32 busy;
-
- udelay(AG71XX_MDIO_DELAY);
-
- busy = ag71xx_mdio_rr(am, AG71XX_REG_MII_IND);
- if (!busy)
- return 0;
-
- udelay(AG71XX_MDIO_DELAY);
- }
-
- pr_err("%s: MDIO operation timed out\n", am->mii_bus->name);
-
- return -ETIMEDOUT;
-}
-
-int ag71xx_mdio_mii_read(struct ag71xx_mdio *am, int addr, int reg)
-{
- int err;
- int ret;
-
- err = ag71xx_mdio_wait_busy(am);
- if (err)
- return 0xffff;
-
- ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
- ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
- ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
- ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_READ);
-
- err = ag71xx_mdio_wait_busy(am);
- if (err)
- return 0xffff;
-
- ret = ag71xx_mdio_rr(am, AG71XX_REG_MII_STATUS) & 0xffff;
- ag71xx_mdio_wr(am, AG71XX_REG_MII_CMD, MII_CMD_WRITE);
-
- DBG("mii_read: addr=%04x, reg=%04x, value=%04x\n", addr, reg, ret);
-
- return ret;
-}
-
-void ag71xx_mdio_mii_write(struct ag71xx_mdio *am, int addr, int reg, u16 val)
-{
- DBG("mii_write: addr=%04x, reg=%04x, value=%04x\n", addr, reg, val);
-
- ag71xx_mdio_wr(am, AG71XX_REG_MII_ADDR,
- ((addr & 0xff) << MII_ADDR_SHIFT) | (reg & 0xff));
- ag71xx_mdio_wr(am, AG71XX_REG_MII_CTRL, val);
-
- ag71xx_mdio_wait_busy(am);
-}
-
-static const u32 ar71xx_mdio_div_table[] = {
- 4, 4, 6, 8, 10, 14, 20, 28,
-};
-
-static const u32 ar7240_mdio_div_table[] = {
- 2, 2, 4, 6, 8, 12, 18, 26, 32, 40, 48, 56, 62, 70, 78, 96,
-};
-
-static const u32 ar933x_mdio_div_table[] = {
- 4, 4, 6, 8, 10, 14, 20, 28, 34, 42, 50, 58, 66, 74, 82, 98,
-};
-
-static int ag71xx_mdio_get_divider(struct ag71xx_mdio *am, u32 *div)
-{
- unsigned long ref_clock, mdio_clock;
- const u32 *table;
- int ndivs;
- int i;
-
- ref_clock = am->pdata->ref_clock;
- mdio_clock = am->pdata->mdio_clock;
-
- if (!ref_clock || !mdio_clock)
- return -EINVAL;
-
- if (am->pdata->is_ar9330 || am->pdata->is_ar934x) {
- table = ar933x_mdio_div_table;
- ndivs = ARRAY_SIZE(ar933x_mdio_div_table);
- } else if (am->pdata->is_ar7240) {
- table = ar7240_mdio_div_table;
- ndivs = ARRAY_SIZE(ar7240_mdio_div_table);
- } else {
- table = ar71xx_mdio_div_table;
- ndivs = ARRAY_SIZE(ar71xx_mdio_div_table);
- }
-
- for (i = 0; i < ndivs; i++) {
- unsigned long t;
-
- t = ref_clock / table[i];
- if (t <= mdio_clock) {
- *div = i;
- return 0;
- }
- }
-
- dev_err(&am->mii_bus->dev, "no divider found for %lu/%lu\n",
- ref_clock, mdio_clock);
- return -ENOENT;
-}
-
-static int ag71xx_mdio_reset(struct mii_bus *bus)
-{
- struct ag71xx_mdio *am = bus->priv;
- u32 t;
- int err;
-
- err = ag71xx_mdio_get_divider(am, &t);
- if (err) {
- /* fallback */
- if (am->pdata->is_ar7240)
- t = MII_CFG_CLK_DIV_6;
- else if (am->pdata->builtin_switch && !am->pdata->is_ar934x)
- t = MII_CFG_CLK_DIV_10;
- else if (!am->pdata->builtin_switch && am->pdata->is_ar934x)
- t = MII_CFG_CLK_DIV_58;
- else
- t = MII_CFG_CLK_DIV_28;
- }
-
- ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t | MII_CFG_RESET);
- udelay(100);
-
- ag71xx_mdio_wr(am, AG71XX_REG_MII_CFG, t);
- udelay(100);
-
- if (am->pdata->reset)
- am->pdata->reset(bus);
-
- return 0;
-}
-
-static int ag71xx_mdio_read(struct mii_bus *bus, int addr, int reg)
-{
- struct ag71xx_mdio *am = bus->priv;
-
- if (am->pdata->builtin_switch)
- return ar7240sw_phy_read(bus, addr, reg);
- else
- return ag71xx_mdio_mii_read(am, addr, reg);
-}
-
-static int ag71xx_mdio_write(struct mii_bus *bus, int addr, int reg, u16 val)
-{
- struct ag71xx_mdio *am = bus->priv;
-
- if (am->pdata->builtin_switch)
- ar7240sw_phy_write(bus, addr, reg, val);
- else
- ag71xx_mdio_mii_write(am, addr, reg, val);
- return 0;
-}
-
-static int ag71xx_mdio_probe(struct platform_device *pdev)
-{
- struct ag71xx_mdio_platform_data *pdata;
- struct ag71xx_mdio *am;
- struct resource *res;
- int i;
- int err;
-
- pdata = pdev->dev.platform_data;
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data specified\n");
- return -EINVAL;
- }
-
- am = kzalloc(sizeof(*am), GFP_KERNEL);
- if (!am) {
- err = -ENOMEM;
- goto err_out;
- }
-
- am->pdata = pdata;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "no iomem resource found\n");
- err = -ENXIO;
- goto err_free_mdio;
- }
-
- am->mdio_base = ioremap_nocache(res->start, res->end - res->start + 1);
- if (!am->mdio_base) {
- dev_err(&pdev->dev, "unable to ioremap registers\n");
- err = -ENOMEM;
- goto err_free_mdio;
- }
-
- am->mii_bus = mdiobus_alloc();
- if (am->mii_bus == NULL) {
- err = -ENOMEM;
- goto err_iounmap;
- }
-
- am->mii_bus->name = "ag71xx_mdio";
- am->mii_bus->read = ag71xx_mdio_read;
- am->mii_bus->write = ag71xx_mdio_write;
- am->mii_bus->reset = ag71xx_mdio_reset;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- am->mii_bus->irq = am->mii_irq;
-#endif
- am->mii_bus->priv = am;
- am->mii_bus->parent = &pdev->dev;
- snprintf(am->mii_bus->id, MII_BUS_ID_SIZE, "%s", dev_name(&pdev->dev));
- am->mii_bus->phy_mask = pdata->phy_mask;
-
- for (i = 0; i < PHY_MAX_ADDR; i++)
- am->mii_bus->irq[i] = PHY_POLL;
-
- ag71xx_mdio_wr(am, AG71XX_REG_MAC_CFG1, 0);
-
- err = mdiobus_register(am->mii_bus);
- if (err)
- goto err_free_bus;
-
- ag71xx_mdio_dump_regs(am);
-
- platform_set_drvdata(pdev, am);
- return 0;
-
-err_free_bus:
- mdiobus_free(am->mii_bus);
-err_iounmap:
- iounmap(am->mdio_base);
-err_free_mdio:
- kfree(am);
-err_out:
- return err;
-}
-
-static int ag71xx_mdio_remove(struct platform_device *pdev)
-{
- struct ag71xx_mdio *am = platform_get_drvdata(pdev);
-
- if (am) {
- mdiobus_unregister(am->mii_bus);
- mdiobus_free(am->mii_bus);
- iounmap(am->mdio_base);
- kfree(am);
- platform_set_drvdata(pdev, NULL);
- }
-
- return 0;
-}
-
-static struct platform_driver ag71xx_mdio_driver = {
- .probe = ag71xx_mdio_probe,
- .remove = ag71xx_mdio_remove,
- .driver = {
- .name = "ag71xx-mdio",
- }
-};
-
-int __init ag71xx_mdio_driver_init(void)
-{
- return platform_driver_register(&ag71xx_mdio_driver);
-}
-
-void ag71xx_mdio_driver_exit(void)
-{
- platform_driver_unregister(&ag71xx_mdio_driver);
-}
diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
deleted file mode 100644
index 336143f753..0000000000
--- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_phy.c
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * Atheros AR71xx built-in ethernet mac driver
- *
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Based on Atheros' AG7100 driver
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include "ag71xx.h"
-
-static void ag71xx_phy_link_adjust(struct net_device *dev)
-{
- struct ag71xx *ag = netdev_priv(dev);
- struct phy_device *phydev = ag->phy_dev;
- unsigned long flags;
- int status_change = 0;
-
- spin_lock_irqsave(&ag->lock, flags);
-
- if (phydev->link) {
- if (ag->duplex != phydev->duplex
- || ag->speed != phydev->speed) {
- status_change = 1;
- }
- }
-
- if (phydev->link != ag->link)
- status_change = 1;
-
- ag->link = phydev->link;
- ag->duplex = phydev->duplex;
- ag->speed = phydev->speed;
-
- if (status_change)
- ag71xx_link_adjust(ag);
-
- spin_unlock_irqrestore(&ag->lock, flags);
-}
-
-void ag71xx_phy_start(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
-
- if (ag->phy_dev) {
- phy_start(ag->phy_dev);
- } else if (pdata->mii_bus_dev && pdata->switch_data) {
- ag71xx_ar7240_start(ag);
- } else {
- ag->link = 1;
- ag71xx_link_adjust(ag);
- }
-}
-
-void ag71xx_phy_stop(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- unsigned long flags;
-
- if (ag->phy_dev)
- phy_stop(ag->phy_dev);
- else if (pdata->mii_bus_dev && pdata->switch_data)
- ag71xx_ar7240_stop(ag);
-
- spin_lock_irqsave(&ag->lock, flags);
- if (ag->link) {
- ag->link = 0;
- ag71xx_link_adjust(ag);
- }
- spin_unlock_irqrestore(&ag->lock, flags);
-}
-
-static int ag71xx_phy_connect_fixed(struct ag71xx *ag)
-{
- struct device *dev = &ag->pdev->dev;
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- int ret = 0;
-
- /* use fixed settings */
- switch (pdata->speed) {
- case SPEED_10:
- case SPEED_100:
- case SPEED_1000:
- break;
- default:
- dev_err(dev, "invalid speed specified\n");
- ret = -EINVAL;
- break;
- }
-
- dev_dbg(dev, "using fixed link parameters\n");
-
- ag->duplex = pdata->duplex;
- ag->speed = pdata->speed;
-
- return ret;
-}
-
-static int ag71xx_phy_connect_multi(struct ag71xx *ag)
-{
- struct device *dev = &ag->pdev->dev;
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
- struct phy_device *phydev = NULL;
- int phy_addr;
- int ret = 0;
-
- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
- if (!(pdata->phy_mask & (1 << phy_addr)))
- continue;
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- if (ag->mii_bus->phy_map[phy_addr] == NULL)
- continue;
-
- DBG("%s: PHY found at %s, uid=%08x\n",
- dev_name(dev),
- dev_name(&ag->mii_bus->phy_map[phy_addr]->dev),
- ag->mii_bus->phy_map[phy_addr]->phy_id);
-
- if (phydev == NULL)
- phydev = ag->mii_bus->phy_map[phy_addr];
-#else
- if (ag->mii_bus->mdio_map[phy_addr] == NULL)
- continue;
-
- DBG("%s: PHY found at %s, uid=%08x\n",
- dev_name(dev),
- dev_name(&ag->mii_bus->mdio_map[phy_addr]->dev),
- (phydev) ? phydev->phy_id : 0);
-
- if (phydev == NULL)
- phydev = mdiobus_get_phy(ag->mii_bus, phy_addr);
-#endif
- }
-
- if (!phydev) {
- dev_err(dev, "no PHY found with phy_mask=%08x\n",
- pdata->phy_mask);
- return -ENODEV;
- }
-
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- ag->phy_dev = phy_connect(ag->dev, dev_name(&phydev->dev),
-#else
- ag->phy_dev = phy_connect(ag->dev, phydev_name(phydev),
-#endif
- &ag71xx_phy_link_adjust,
- pdata->phy_if_mode);
-
- if (IS_ERR(ag->phy_dev)) {
- dev_err(dev, "could not connect to PHY at %s\n",
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- dev_name(&phydev->dev));
-#else
- phydev_name(phydev));
-#endif
- return PTR_ERR(ag->phy_dev);
- }
-
- /* mask with MAC supported features */
- if (pdata->has_gbit)
- phydev->supported &= PHY_GBIT_FEATURES;
- else
- phydev->supported &= PHY_BASIC_FEATURES;
-
- phydev->advertising = phydev->supported;
-
- dev_info(dev, "connected to PHY at %s [uid=%08x, driver=%s]\n",
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- dev_name(&phydev->dev),
-#else
- phydev_name(phydev),
-#endif
- phydev->phy_id, phydev->drv->name);
-
- ag->link = 0;
- ag->speed = 0;
- ag->duplex = -1;
-
- return ret;
-}
-
-static int dev_is_class(struct device *dev, void *class)
-{
- if (dev->class != NULL && !strcmp(dev->class->name, class))
- return 1;
-
- return 0;
-}
-
-static struct device *dev_find_class(struct device *parent, char *class)
-{
- if (dev_is_class(parent, class)) {
- get_device(parent);
- return parent;
- }
-
- return device_find_child(parent, class, dev_is_class);
-}
-
-static struct mii_bus *dev_to_mii_bus(struct device *dev)
-{
- struct device *d;
-
- d = dev_find_class(dev, "mdio_bus");
- if (d != NULL) {
- struct mii_bus *bus;
-
- bus = to_mii_bus(d);
- put_device(d);
-
- return bus;
- }
-
- return NULL;
-}
-
-int ag71xx_phy_connect(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
-
- if (pdata->mii_bus_dev == NULL ||
- pdata->mii_bus_dev->bus == NULL )
- return ag71xx_phy_connect_fixed(ag);
-
- ag->mii_bus = dev_to_mii_bus(pdata->mii_bus_dev);
- if (ag->mii_bus == NULL) {
- dev_err(&ag->pdev->dev, "unable to find MII bus on device '%s'\n",
- dev_name(pdata->mii_bus_dev));
- return -ENODEV;
- }
-
- /* Reset the mdio bus explicitly */
- if (ag->mii_bus->reset) {
- mutex_lock(&ag->mii_bus->mdio_lock);
- ag->mii_bus->reset(ag->mii_bus);
- mutex_unlock(&ag->mii_bus->mdio_lock);
- }
-
- if (pdata->switch_data)
- return ag71xx_ar7240_init(ag);
-
- if (pdata->phy_mask)
- return ag71xx_phy_connect_multi(ag);
-
- return ag71xx_phy_connect_fixed(ag);
-}
-
-void ag71xx_phy_disconnect(struct ag71xx *ag)
-{
- struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag);
-
- if (pdata->switch_data)
- ag71xx_ar7240_cleanup(ag);
- else if (ag->phy_dev)
- phy_disconnect(ag->phy_dev);
-}
diff --git a/target/linux/ar71xx/files/drivers/spi/spi-rb4xx-cpld.c b/target/linux/ar71xx/files/drivers/spi/spi-rb4xx-cpld.c
deleted file mode 100644
index 18af83b67c..0000000000
--- a/target/linux/ar71xx/files/drivers/spi/spi-rb4xx-cpld.c
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * SPI driver for the CPLD chip on the Mikrotik RB4xx boards
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was based on the patches for Linux 2.6.27.39 published by
- * MikroTik for their RouterBoard 4xx series devices.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/bitops.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
-#include <linux/slab.h>
-#include <linux/version.h>
-
-#include <asm/mach-ath79/rb4xx_cpld.h>
-
-#define DRV_NAME "spi-rb4xx-cpld"
-#define DRV_DESC "RB4xx CPLD driver"
-#define DRV_VERSION "0.1.0"
-
-#define CPLD_CMD_WRITE_NAND 0x08 /* send cmd, n x send data, send indle */
-#define CPLD_CMD_WRITE_CFG 0x09 /* send cmd, n x send cfg */
-#define CPLD_CMD_READ_NAND 0x0a /* send cmd, send idle, n x read data */
-#define CPLD_CMD_READ_FAST 0x0b /* send cmd, 4 x idle, n x read data */
-#define CPLD_CMD_LED5_ON 0x0c /* send cmd */
-#define CPLD_CMD_LED5_OFF 0x0d /* send cmd */
-
-struct rb4xx_cpld {
- struct spi_device *spi;
- struct mutex lock;
- struct gpio_chip chip;
- unsigned int config;
-};
-
-static struct rb4xx_cpld *rb4xx_cpld;
-
-static inline struct rb4xx_cpld *gpio_to_cpld(struct gpio_chip *chip)
-{
- return container_of(chip, struct rb4xx_cpld, chip);
-}
-
-static int rb4xx_cpld_write_cmd(struct rb4xx_cpld *cpld, unsigned char cmd)
-{
- struct spi_transfer t[1];
- struct spi_message m;
- unsigned char tx_buf[1];
- int err;
-
- spi_message_init(&m);
- memset(&t, 0, sizeof(t));
-
- t[0].tx_buf = tx_buf;
- t[0].len = sizeof(tx_buf);
- spi_message_add_tail(&t[0], &m);
-
- tx_buf[0] = cmd;
-
- err = spi_sync(cpld->spi, &m);
- return err;
-}
-
-static int rb4xx_cpld_write_cfg(struct rb4xx_cpld *cpld, unsigned char config)
-{
- struct spi_transfer t[1];
- struct spi_message m;
- unsigned char cmd[2];
- int err;
-
- spi_message_init(&m);
- memset(&t, 0, sizeof(t));
-
- t[0].tx_buf = cmd;
- t[0].len = sizeof(cmd);
- spi_message_add_tail(&t[0], &m);
-
- cmd[0] = CPLD_CMD_WRITE_CFG;
- cmd[1] = config;
-
- err = spi_sync(cpld->spi, &m);
- return err;
-}
-
-static int __rb4xx_cpld_change_cfg(struct rb4xx_cpld *cpld, unsigned mask,
- unsigned value)
-{
- unsigned int config;
- int err;
-
- config = cpld->config & ~mask;
- config |= value;
-
- if ((cpld->config ^ config) & 0xff) {
- err = rb4xx_cpld_write_cfg(cpld, config);
- if (err)
- return err;
- }
-
- if ((cpld->config ^ config) & CPLD_CFG_nLED5) {
- err = rb4xx_cpld_write_cmd(cpld, (value) ? CPLD_CMD_LED5_ON :
- CPLD_CMD_LED5_OFF);
- if (err)
- return err;
- }
-
- cpld->config = config;
- return 0;
-}
-
-int rb4xx_cpld_change_cfg(unsigned mask, unsigned value)
-{
- int ret;
-
- if (rb4xx_cpld == NULL)
- return -ENODEV;
-
- mutex_lock(&rb4xx_cpld->lock);
- ret = __rb4xx_cpld_change_cfg(rb4xx_cpld, mask, value);
- mutex_unlock(&rb4xx_cpld->lock);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(rb4xx_cpld_change_cfg);
-
-int rb4xx_cpld_read(unsigned char *rx_buf, unsigned count)
-{
- static const unsigned char cmd[2] = { CPLD_CMD_READ_NAND, 0 };
- struct spi_transfer t[2] = {
- {
- .tx_buf = &cmd,
- .len = 2,
- }, {
- .rx_buf = rx_buf,
- .len = count,
- },
- };
- struct spi_message m;
-
- if (rb4xx_cpld == NULL)
- return -ENODEV;
-
- spi_message_init(&m);
- spi_message_add_tail(&t[0], &m);
- spi_message_add_tail(&t[1], &m);
- return spi_sync(rb4xx_cpld->spi, &m);
-}
-EXPORT_SYMBOL_GPL(rb4xx_cpld_read);
-
-int rb4xx_cpld_write(const unsigned char *buf, unsigned count)
-{
- static const unsigned char cmd = CPLD_CMD_WRITE_NAND;
- struct spi_transfer t[3] = {
- {
- .tx_buf = &cmd,
- .len = 1,
- }, {
- .tx_buf = buf,
- .len = count,
- .tx_nbits = SPI_NBITS_DUAL,
- }, {
- .len = 1,
- .tx_nbits = SPI_NBITS_DUAL,
- },
- };
- struct spi_message m;
-
- if (rb4xx_cpld == NULL)
- return -ENODEV;
-
- spi_message_init(&m);
- spi_message_add_tail(&t[0], &m);
- spi_message_add_tail(&t[1], &m);
- spi_message_add_tail(&t[2], &m);
- return spi_sync(rb4xx_cpld->spi, &m);
-}
-EXPORT_SYMBOL_GPL(rb4xx_cpld_write);
-
-static int rb4xx_cpld_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
- int ret;
-
- mutex_lock(&cpld->lock);
- ret = (cpld->config >> offset) & 1;
- mutex_unlock(&cpld->lock);
-
- return ret;
-}
-
-static void rb4xx_cpld_gpio_set(struct gpio_chip *chip, unsigned offset,
- int value)
-{
- struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
-
- mutex_lock(&cpld->lock);
- __rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset);
- mutex_unlock(&cpld->lock);
-}
-
-static int rb4xx_cpld_gpio_direction_input(struct gpio_chip *chip,
- unsigned offset)
-{
- return -EOPNOTSUPP;
-}
-
-static int rb4xx_cpld_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset,
- int value)
-{
- struct rb4xx_cpld *cpld = gpio_to_cpld(chip);
- int ret;
-
- mutex_lock(&cpld->lock);
- ret = __rb4xx_cpld_change_cfg(cpld, (1 << offset), !!value << offset);
- mutex_unlock(&cpld->lock);
-
- return ret;
-}
-
-static int rb4xx_cpld_gpio_init(struct rb4xx_cpld *cpld, unsigned int base)
-{
- int err;
-
- /* init config */
- cpld->config = CPLD_CFG_nLED1 | CPLD_CFG_nLED2 | CPLD_CFG_nLED3 |
- CPLD_CFG_nLED4 | CPLD_CFG_nCE;
- rb4xx_cpld_write_cfg(cpld, cpld->config);
-
- /* setup GPIO chip */
- cpld->chip.label = DRV_NAME;
-
- cpld->chip.get = rb4xx_cpld_gpio_get;
- cpld->chip.set = rb4xx_cpld_gpio_set;
- cpld->chip.direction_input = rb4xx_cpld_gpio_direction_input;
- cpld->chip.direction_output = rb4xx_cpld_gpio_direction_output;
-
- cpld->chip.base = base;
- cpld->chip.ngpio = CPLD_NUM_GPIOS;
- cpld->chip.can_sleep = 1;
-#if LINUX_VERSION_CODE < KERNEL_VERSION(4,5,0)
- cpld->chip.dev = &cpld->spi->dev;
-#else
- cpld->chip.parent = &cpld->spi->dev;
-#endif
- cpld->chip.owner = THIS_MODULE;
-
- err = gpiochip_add(&cpld->chip);
- if (err)
- dev_err(&cpld->spi->dev, "adding GPIO chip failed, err=%d\n",
- err);
-
- return err;
-}
-
-static int rb4xx_cpld_probe(struct spi_device *spi)
-{
- struct rb4xx_cpld *cpld;
- struct rb4xx_cpld_platform_data *pdata;
- int err;
-
- pdata = spi->dev.platform_data;
- if (!pdata) {
- dev_dbg(&spi->dev, "no platform data\n");
- return -EINVAL;
- }
-
- cpld = kzalloc(sizeof(*cpld), GFP_KERNEL);
- if (!cpld) {
- dev_err(&spi->dev, "no memory for private data\n");
- return -ENOMEM;
- }
-
- mutex_init(&cpld->lock);
- cpld->spi = spi_dev_get(spi);
- dev_set_drvdata(&spi->dev, cpld);
-
- spi->mode = SPI_MODE_0 | SPI_TX_DUAL;
- spi->bits_per_word = 8;
- err = spi_setup(spi);
- if (err) {
- dev_err(&spi->dev, "spi_setup failed, err=%d\n", err);
- goto err_drvdata;
- }
-
- err = rb4xx_cpld_gpio_init(cpld, pdata->gpio_base);
- if (err)
- goto err_drvdata;
-
- rb4xx_cpld = cpld;
-
- return 0;
-
-err_drvdata:
- dev_set_drvdata(&spi->dev, NULL);
- kfree(cpld);
-
- return err;
-}
-
-static int rb4xx_cpld_remove(struct spi_device *spi)
-{
- struct rb4xx_cpld *cpld;
-
- rb4xx_cpld = NULL;
- cpld = dev_get_drvdata(&spi->dev);
- dev_set_drvdata(&spi->dev, NULL);
- kfree(cpld);
-
- return 0;
-}
-
-static struct spi_driver rb4xx_cpld_driver = {
- .driver = {
- .name = DRV_NAME,
- .bus = &spi_bus_type,
- .owner = THIS_MODULE,
- },
- .probe = rb4xx_cpld_probe,
- .remove = rb4xx_cpld_remove,
-};
-
-static int __init rb4xx_cpld_init(void)
-{
- return spi_register_driver(&rb4xx_cpld_driver);
-}
-module_init(rb4xx_cpld_init);
-
-static void __exit rb4xx_cpld_exit(void)
-{
- spi_unregister_driver(&rb4xx_cpld_driver);
-}
-module_exit(rb4xx_cpld_exit);
-
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/files/drivers/spi/spi-rb4xx.c b/target/linux/ar71xx/files/drivers/spi/spi-rb4xx.c
deleted file mode 100644
index 2d95e80495..0000000000
--- a/target/linux/ar71xx/files/drivers/spi/spi-rb4xx.c
+++ /dev/null
@@ -1,430 +0,0 @@
-/*
- * SPI controller driver for the Mikrotik RB4xx boards
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This file was based on the patches for Linux 2.6.27.39 published by
- * MikroTik for their RouterBoard 4xx series devices.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-ath79/ar71xx_regs.h>
-#include <asm/mach-ath79/ath79.h>
-
-#define DRV_NAME "rb4xx-spi"
-#define DRV_DESC "Mikrotik RB4xx SPI controller driver"
-#define DRV_VERSION "0.1.0"
-
-#define SPI_CTRL_FASTEST 0x40
-#define SPI_FLASH_HZ 33333334
-#define SPI_CPLD_HZ 33333334
-
-#define CPLD_CMD_READ_FAST 0x0b
-
-#undef RB4XX_SPI_DEBUG
-
-struct rb4xx_spi {
- void __iomem *base;
- struct spi_master *master;
-
- unsigned spi_ctrl_flash;
- unsigned spi_ctrl_fread;
-
- struct clk *ahb_clk;
- unsigned long ahb_freq;
-
- spinlock_t lock;
- struct list_head queue;
- int busy:1;
- int cs_wait;
-};
-
-static unsigned spi_clk_low = AR71XX_SPI_IOC_CS1;
-
-#ifdef RB4XX_SPI_DEBUG
-static inline void do_spi_delay(void)
-{
- ndelay(20000);
-}
-#else
-static inline void do_spi_delay(void) { }
-#endif
-
-static inline void do_spi_init(struct spi_device *spi)
-{
- unsigned cs = AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1;
-
- if (!(spi->mode & SPI_CS_HIGH))
- cs ^= (spi->chip_select == 2) ? AR71XX_SPI_IOC_CS1 :
- AR71XX_SPI_IOC_CS0;
-
- spi_clk_low = cs;
-}
-
-static inline void do_spi_finish(void __iomem *base)
-{
- do_spi_delay();
- __raw_writel(AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1,
- base + AR71XX_SPI_REG_IOC);
-}
-
-static inline void do_spi_clk(void __iomem *base, int bit)
-{
- unsigned bval = spi_clk_low | ((bit & 1) ? AR71XX_SPI_IOC_DO : 0);
-
- do_spi_delay();
- __raw_writel(bval, base + AR71XX_SPI_REG_IOC);
- do_spi_delay();
- __raw_writel(bval | AR71XX_SPI_IOC_CLK, base + AR71XX_SPI_REG_IOC);
-}
-
-static void do_spi_byte(void __iomem *base, unsigned char byte)
-{
- do_spi_clk(base, byte >> 7);
- do_spi_clk(base, byte >> 6);
- do_spi_clk(base, byte >> 5);
- do_spi_clk(base, byte >> 4);
- do_spi_clk(base, byte >> 3);
- do_spi_clk(base, byte >> 2);
- do_spi_clk(base, byte >> 1);
- do_spi_clk(base, byte);
-
- pr_debug("spi_byte sent 0x%02x got 0x%02x\n",
- (unsigned)byte,
- (unsigned char)__raw_readl(base + AR71XX_SPI_REG_RDS));
-}
-
-static inline void do_spi_clk_fast(void __iomem *base, unsigned bit1,
- unsigned bit2)
-{
- unsigned bval = (spi_clk_low |
- ((bit1 & 1) ? AR71XX_SPI_IOC_DO : 0) |
- ((bit2 & 1) ? AR71XX_SPI_IOC_CS2 : 0));
- do_spi_delay();
- __raw_writel(bval, base + AR71XX_SPI_REG_IOC);
- do_spi_delay();
- __raw_writel(bval | AR71XX_SPI_IOC_CLK, base + AR71XX_SPI_REG_IOC);
-}
-
-static void do_spi_byte_fast(void __iomem *base, unsigned char byte)
-{
- do_spi_clk_fast(base, byte >> 7, byte >> 6);
- do_spi_clk_fast(base, byte >> 5, byte >> 4);
- do_spi_clk_fast(base, byte >> 3, byte >> 2);
- do_spi_clk_fast(base, byte >> 1, byte >> 0);
-
- pr_debug("spi_byte_fast sent 0x%02x got 0x%02x\n",
- (unsigned)byte,
- (unsigned char) __raw_readl(base + AR71XX_SPI_REG_RDS));
-}
-
-static int rb4xx_spi_txrx(void __iomem *base, struct spi_transfer *t)
-{
- const unsigned char *tx_ptr = t->tx_buf;
- unsigned char *rx_ptr = t->rx_buf;
- unsigned i;
-
- pr_debug("spi_txrx len %u tx %u rx %u\n",
- t->len,
- (t->tx_buf ? 1 : 0),
- (t->rx_buf ? 1 : 0));
-
- for (i = 0; i < t->len; ++i) {
- unsigned char sdata = tx_ptr ? tx_ptr[i] : 0;
-
- if (t->tx_nbits == SPI_NBITS_DUAL)
- do_spi_byte_fast(base, sdata);
- else
- do_spi_byte(base, sdata);
-
- if (rx_ptr)
- rx_ptr[i] = __raw_readl(base + AR71XX_SPI_REG_RDS) & 0xff;
- }
-
- return i;
-}
-
-static int rb4xx_spi_msg(struct rb4xx_spi *rbspi, struct spi_message *m)
-{
- struct spi_transfer *t = NULL;
- void __iomem *base = rbspi->base;
-
- m->status = 0;
- if (list_empty(&m->transfers))
- return -1;
-
- __raw_writel(AR71XX_SPI_FS_GPIO, base + AR71XX_SPI_REG_FS);
- __raw_writel(SPI_CTRL_FASTEST, base + AR71XX_SPI_REG_CTRL);
- do_spi_init(m->spi);
-
- list_for_each_entry(t, &m->transfers, transfer_list) {
- int len;
-
- len = rb4xx_spi_txrx(base, t);
- if (len != t->len) {
- m->status = -EMSGSIZE;
- break;
- }
- m->actual_length += len;
-
- if (t->cs_change) {
- if (list_is_last(&t->transfer_list, &m->transfers)) {
- /* wait for continuation */
- return m->spi->chip_select;
- }
- do_spi_finish(base);
- ndelay(100);
- }
- }
-
- do_spi_finish(base);
- __raw_writel(rbspi->spi_ctrl_flash, base + AR71XX_SPI_REG_CTRL);
- __raw_writel(0, base + AR71XX_SPI_REG_FS);
- return -1;
-}
-
-static void rb4xx_spi_process_queue_locked(struct rb4xx_spi *rbspi,
- unsigned long *flags)
-{
- int cs = rbspi->cs_wait;
-
- rbspi->busy = 1;
- while (!list_empty(&rbspi->queue)) {
- struct spi_message *m;
-
- list_for_each_entry(m, &rbspi->queue, queue)
- if (cs < 0 || cs == m->spi->chip_select)
- break;
-
- if (&m->queue == &rbspi->queue)
- break;
-
- list_del_init(&m->queue);
- spin_unlock_irqrestore(&rbspi->lock, *flags);
-
- cs = rb4xx_spi_msg(rbspi, m);
- m->complete(m->context);
-
- spin_lock_irqsave(&rbspi->lock, *flags);
- }
-
- rbspi->cs_wait = cs;
- rbspi->busy = 0;
-
- if (cs >= 0) {
- /* TODO: add timer to unlock cs after 1s inactivity */
- }
-}
-
-static int rb4xx_spi_transfer(struct spi_device *spi,
- struct spi_message *m)
-{
- struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master);
- unsigned long flags;
-
- m->actual_length = 0;
- m->status = -EINPROGRESS;
-
- spin_lock_irqsave(&rbspi->lock, flags);
- list_add_tail(&m->queue, &rbspi->queue);
- if (rbspi->busy ||
- (rbspi->cs_wait >= 0 && rbspi->cs_wait != m->spi->chip_select)) {
- /* job will be done later */
- spin_unlock_irqrestore(&rbspi->lock, flags);
- return 0;
- }
-
- /* process job in current context */
- rb4xx_spi_process_queue_locked(rbspi, &flags);
- spin_unlock_irqrestore(&rbspi->lock, flags);
-
- return 0;
-}
-
-static int rb4xx_spi_setup(struct spi_device *spi)
-{
- struct rb4xx_spi *rbspi = spi_master_get_devdata(spi->master);
- unsigned long flags;
-
- if (spi->mode & ~(SPI_CS_HIGH | SPI_TX_DUAL)) {
- dev_err(&spi->dev, "mode %x not supported\n",
- (unsigned) spi->mode);
- return -EINVAL;
- }
-
- if (spi->bits_per_word != 8 && spi->bits_per_word != 0) {
- dev_err(&spi->dev, "bits_per_word %u not supported\n",
- (unsigned) spi->bits_per_word);
- return -EINVAL;
- }
-
- spin_lock_irqsave(&rbspi->lock, flags);
- if (rbspi->cs_wait == spi->chip_select && !rbspi->busy) {
- rbspi->cs_wait = -1;
- rb4xx_spi_process_queue_locked(rbspi, &flags);
- }
- spin_unlock_irqrestore(&rbspi->lock, flags);
-
- return 0;
-}
-
-static unsigned get_spi_ctrl(struct rb4xx_spi *rbspi, unsigned hz_max,
- const char *name)
-{
- unsigned div;
-
- div = (rbspi->ahb_freq - 1) / (2 * hz_max);
-
- /*
- * CPU has a bug at (div == 0) - first bit read is random
- */
- if (div == 0)
- ++div;
-
- if (name) {
- unsigned ahb_khz = (rbspi->ahb_freq + 500) / 1000;
- unsigned div_real = 2 * (div + 1);
- pr_debug("rb4xx: %s SPI clock %u kHz (AHB %u kHz / %u)\n",
- name,
- ahb_khz / div_real,
- ahb_khz, div_real);
- }
-
- return SPI_CTRL_FASTEST + div;
-}
-
-static int rb4xx_spi_probe(struct platform_device *pdev)
-{
- struct spi_master *master;
- struct rb4xx_spi *rbspi;
- struct resource *r;
- int err = 0;
-
- master = spi_alloc_master(&pdev->dev, sizeof(*rbspi));
- if (master == NULL) {
- dev_err(&pdev->dev, "no memory for spi_master\n");
- err = -ENOMEM;
- goto err_out;
- }
-
- master->bus_num = 0;
- master->num_chipselect = 3;
- master->mode_bits = SPI_TX_DUAL;
- master->setup = rb4xx_spi_setup;
- master->transfer = rb4xx_spi_transfer;
-
- rbspi = spi_master_get_devdata(master);
-
- rbspi->ahb_clk = clk_get(&pdev->dev, "ahb");
- if (IS_ERR(rbspi->ahb_clk)) {
- err = PTR_ERR(rbspi->ahb_clk);
- goto err_put_master;
- }
-
- err = clk_prepare_enable(rbspi->ahb_clk);
- if (err)
- goto err_clk_put;
-
- rbspi->ahb_freq = clk_get_rate(rbspi->ahb_clk);
- if (!rbspi->ahb_freq) {
- err = -EINVAL;
- goto err_clk_disable;
- }
-
- platform_set_drvdata(pdev, rbspi);
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (r == NULL) {
- err = -ENOENT;
- goto err_clk_disable;
- }
-
- rbspi->base = ioremap(r->start, r->end - r->start + 1);
- if (!rbspi->base) {
- err = -ENXIO;
- goto err_clk_disable;
- }
-
- rbspi->master = master;
- rbspi->spi_ctrl_flash = get_spi_ctrl(rbspi, SPI_FLASH_HZ, "FLASH");
- rbspi->spi_ctrl_fread = get_spi_ctrl(rbspi, SPI_CPLD_HZ, "CPLD");
- rbspi->cs_wait = -1;
-
- spin_lock_init(&rbspi->lock);
- INIT_LIST_HEAD(&rbspi->queue);
-
- err = spi_register_master(master);
- if (err) {
- dev_err(&pdev->dev, "failed to register SPI master\n");
- goto err_iounmap;
- }
-
- return 0;
-
-err_iounmap:
- iounmap(rbspi->base);
-err_clk_disable:
- clk_disable_unprepare(rbspi->ahb_clk);
-err_clk_put:
- clk_put(rbspi->ahb_clk);
-err_put_master:
- platform_set_drvdata(pdev, NULL);
- spi_master_put(master);
-err_out:
- return err;
-}
-
-static int rb4xx_spi_remove(struct platform_device *pdev)
-{
- struct rb4xx_spi *rbspi = platform_get_drvdata(pdev);
-
- iounmap(rbspi->base);
- clk_disable_unprepare(rbspi->ahb_clk);
- clk_put(rbspi->ahb_clk);
- platform_set_drvdata(pdev, NULL);
- spi_master_put(rbspi->master);
-
- return 0;
-}
-
-static struct platform_driver rb4xx_spi_drv = {
- .probe = rb4xx_spi_probe,
- .remove = rb4xx_spi_remove,
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init rb4xx_spi_init(void)
-{
- return platform_driver_register(&rb4xx_spi_drv);
-}
-subsys_initcall(rb4xx_spi_init);
-
-static void __exit rb4xx_spi_exit(void)
-{
- platform_driver_unregister(&rb4xx_spi_drv);
-}
-
-module_exit(rb4xx_spi_exit);
-
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/files/drivers/spi/spi-vsc7385.c b/target/linux/ar71xx/files/drivers/spi/spi-vsc7385.c
deleted file mode 100644
index b712e71875..0000000000
--- a/target/linux/ar71xx/files/drivers/spi/spi-vsc7385.c
+++ /dev/null
@@ -1,621 +0,0 @@
-/*
- * SPI driver for the Vitesse VSC7385 ethernet switch
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * Parts of this file are based on Atheros' 2.6.15 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/bitops.h>
-#include <linux/firmware.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/vsc7385.h>
-
-#define DRV_NAME "spi-vsc7385"
-#define DRV_DESC "Vitesse VSC7385 Gbit ethernet switch driver"
-#define DRV_VERSION "0.1.0"
-
-#define VSC73XX_BLOCK_MAC 0x1
-#define VSC73XX_BLOCK_2 0x2
-#define VSC73XX_BLOCK_MII 0x3
-#define VSC73XX_BLOCK_4 0x4
-#define VSC73XX_BLOCK_5 0x5
-#define VSC73XX_BLOCK_SYSTEM 0x7
-
-#define VSC73XX_SUBBLOCK_PORT_0 0
-#define VSC73XX_SUBBLOCK_PORT_1 1
-#define VSC73XX_SUBBLOCK_PORT_2 2
-#define VSC73XX_SUBBLOCK_PORT_3 3
-#define VSC73XX_SUBBLOCK_PORT_4 4
-#define VSC73XX_SUBBLOCK_PORT_MAC 6
-
-/* MAC Block registers */
-#define VSC73XX_MAC_CFG 0x0
-#define VSC73XX_ADVPORTM 0x19
-#define VSC73XX_RXOCT 0x50
-#define VSC73XX_TXOCT 0x51
-#define VSC73XX_C_RX0 0x52
-#define VSC73XX_C_RX1 0x53
-#define VSC73XX_C_RX2 0x54
-#define VSC73XX_C_TX0 0x55
-#define VSC73XX_C_TX1 0x56
-#define VSC73XX_C_TX2 0x57
-#define VSC73XX_C_CFG 0x58
-
-/* MAC_CFG register bits */
-#define VSC73XX_MAC_CFG_WEXC_DIS (1 << 31)
-#define VSC73XX_MAC_CFG_PORT_RST (1 << 29)
-#define VSC73XX_MAC_CFG_TX_EN (1 << 28)
-#define VSC73XX_MAC_CFG_SEED_LOAD (1 << 27)
-#define VSC73XX_MAC_CFG_FDX (1 << 18)
-#define VSC73XX_MAC_CFG_GIGE (1 << 17)
-#define VSC73XX_MAC_CFG_RX_EN (1 << 16)
-#define VSC73XX_MAC_CFG_VLAN_DBLAWR (1 << 15)
-#define VSC73XX_MAC_CFG_VLAN_AWR (1 << 14)
-#define VSC73XX_MAC_CFG_100_BASE_T (1 << 13)
-#define VSC73XX_MAC_CFG_TX_IPG(x) (((x) & 0x1f) << 6)
-#define VSC73XX_MAC_CFG_MAC_RX_RST (1 << 5)
-#define VSC73XX_MAC_CFG_MAC_TX_RST (1 << 4)
-#define VSC73XX_MAC_CFG_BIT2 (1 << 2)
-#define VSC73XX_MAC_CFG_CLK_SEL(x) ((x) & 0x3)
-
-/* ADVPORTM register bits */
-#define VSC73XX_ADVPORTM_IFG_PPM (1 << 7)
-#define VSC73XX_ADVPORTM_EXC_COL_CONT (1 << 6)
-#define VSC73XX_ADVPORTM_EXT_PORT (1 << 5)
-#define VSC73XX_ADVPORTM_INV_GTX (1 << 4)
-#define VSC73XX_ADVPORTM_ENA_GTX (1 << 3)
-#define VSC73XX_ADVPORTM_DDR_MODE (1 << 2)
-#define VSC73XX_ADVPORTM_IO_LOOPBACK (1 << 1)
-#define VSC73XX_ADVPORTM_HOST_LOOPBACK (1 << 0)
-
-/* MII Block registers */
-#define VSC73XX_MII_STAT 0x0
-#define VSC73XX_MII_CMD 0x1
-#define VSC73XX_MII_DATA 0x2
-
-/* System Block registers */
-#define VSC73XX_ICPU_SIPAD 0x01
-#define VSC73XX_ICPU_CLOCK_DELAY 0x05
-#define VSC73XX_ICPU_CTRL 0x10
-#define VSC73XX_ICPU_ADDR 0x11
-#define VSC73XX_ICPU_SRAM 0x12
-#define VSC73XX_ICPU_MBOX_VAL 0x15
-#define VSC73XX_ICPU_MBOX_SET 0x16
-#define VSC73XX_ICPU_MBOX_CLR 0x17
-#define VSC73XX_ICPU_CHIPID 0x18
-#define VSC73XX_ICPU_GPIO 0x34
-
-#define VSC73XX_ICPU_CTRL_CLK_DIV (1 << 8)
-#define VSC73XX_ICPU_CTRL_SRST_HOLD (1 << 7)
-#define VSC73XX_ICPU_CTRL_BOOT_EN (1 << 3)
-#define VSC73XX_ICPU_CTRL_EXT_ACC_EN (1 << 2)
-#define VSC73XX_ICPU_CTRL_CLK_EN (1 << 1)
-#define VSC73XX_ICPU_CTRL_SRST (1 << 0)
-
-#define VSC73XX_ICPU_CHIPID_ID_SHIFT 12
-#define VSC73XX_ICPU_CHIPID_ID_MASK 0xffff
-#define VSC73XX_ICPU_CHIPID_REV_SHIFT 28
-#define VSC73XX_ICPU_CHIPID_REV_MASK 0xf
-#define VSC73XX_ICPU_CHIPID_ID_7385 0x7385
-#define VSC73XX_ICPU_CHIPID_ID_7395 0x7395
-
-#define VSC73XX_CMD_MODE_READ 0
-#define VSC73XX_CMD_MODE_WRITE 1
-#define VSC73XX_CMD_MODE_SHIFT 4
-#define VSC73XX_CMD_BLOCK_SHIFT 5
-#define VSC73XX_CMD_BLOCK_MASK 0x7
-#define VSC73XX_CMD_SUBBLOCK_MASK 0xf
-
-#define VSC7385_CLOCK_DELAY ((3 << 4) | 3)
-#define VSC7385_CLOCK_DELAY_MASK ((3 << 4) | 3)
-
-#define VSC73XX_ICPU_CTRL_STOP (VSC73XX_ICPU_CTRL_SRST_HOLD | \
- VSC73XX_ICPU_CTRL_BOOT_EN | \
- VSC73XX_ICPU_CTRL_EXT_ACC_EN)
-
-#define VSC73XX_ICPU_CTRL_START (VSC73XX_ICPU_CTRL_CLK_DIV | \
- VSC73XX_ICPU_CTRL_BOOT_EN | \
- VSC73XX_ICPU_CTRL_CLK_EN | \
- VSC73XX_ICPU_CTRL_SRST)
-
-#define VSC7385_ADVPORTM_MASK (VSC73XX_ADVPORTM_IFG_PPM | \
- VSC73XX_ADVPORTM_EXC_COL_CONT | \
- VSC73XX_ADVPORTM_EXT_PORT | \
- VSC73XX_ADVPORTM_INV_GTX | \
- VSC73XX_ADVPORTM_ENA_GTX | \
- VSC73XX_ADVPORTM_DDR_MODE | \
- VSC73XX_ADVPORTM_IO_LOOPBACK | \
- VSC73XX_ADVPORTM_HOST_LOOPBACK)
-
-#define VSC7385_ADVPORTM_INIT (VSC73XX_ADVPORTM_EXT_PORT | \
- VSC73XX_ADVPORTM_ENA_GTX | \
- VSC73XX_ADVPORTM_DDR_MODE)
-
-#define VSC7385_MAC_CFG_RESET (VSC73XX_MAC_CFG_PORT_RST | \
- VSC73XX_MAC_CFG_MAC_RX_RST | \
- VSC73XX_MAC_CFG_MAC_TX_RST)
-
-#define VSC73XX_MAC_CFG_INIT (VSC73XX_MAC_CFG_TX_EN | \
- VSC73XX_MAC_CFG_FDX | \
- VSC73XX_MAC_CFG_GIGE | \
- VSC73XX_MAC_CFG_RX_EN)
-
-#define VSC73XX_RESET_DELAY 100
-
-struct vsc7385 {
- struct spi_device *spi;
- struct mutex lock;
- struct vsc7385_platform_data *pdata;
-};
-
-static int vsc7385_is_addr_valid(u8 block, u8 subblock)
-{
- switch (block) {
- case VSC73XX_BLOCK_MAC:
- switch (subblock) {
- case 0 ... 4:
- case 6:
- return 1;
- }
- break;
-
- case VSC73XX_BLOCK_2:
- case VSC73XX_BLOCK_SYSTEM:
- switch (subblock) {
- case 0:
- return 1;
- }
- break;
-
- case VSC73XX_BLOCK_MII:
- case VSC73XX_BLOCK_4:
- case VSC73XX_BLOCK_5:
- switch (subblock) {
- case 0 ... 1:
- return 1;
- }
- break;
- }
-
- return 0;
-}
-
-static inline u8 vsc7385_make_addr(u8 mode, u8 block, u8 subblock)
-{
- u8 ret;
-
- ret = (block & VSC73XX_CMD_BLOCK_MASK) << VSC73XX_CMD_BLOCK_SHIFT;
- ret |= (mode & 1) << VSC73XX_CMD_MODE_SHIFT;
- ret |= subblock & VSC73XX_CMD_SUBBLOCK_MASK;
-
- return ret;
-}
-
-static int vsc7385_read(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg,
- u32 *value)
-{
- u8 cmd[4];
- u8 buf[4];
- struct spi_transfer t[2];
- struct spi_message m;
- int err;
-
- if (!vsc7385_is_addr_valid(block, subblock))
- return -EINVAL;
-
- spi_message_init(&m);
-
- memset(&t, 0, sizeof(t));
-
- t[0].tx_buf = cmd;
- t[0].len = sizeof(cmd);
- spi_message_add_tail(&t[0], &m);
-
- t[1].rx_buf = buf;
- t[1].len = sizeof(buf);
- spi_message_add_tail(&t[1], &m);
-
- cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_READ, block, subblock);
- cmd[1] = reg;
- cmd[2] = 0;
- cmd[3] = 0;
-
- mutex_lock(&vsc->lock);
- err = spi_sync(vsc->spi, &m);
- mutex_unlock(&vsc->lock);
-
- if (err)
- return err;
-
- *value = (((u32) buf[0]) << 24) | (((u32) buf[1]) << 16) |
- (((u32) buf[2]) << 8) | ((u32) buf[3]);
-
- return 0;
-}
-
-
-static int vsc7385_write(struct vsc7385 *vsc, u8 block, u8 subblock, u8 reg,
- u32 value)
-{
- u8 cmd[2];
- u8 buf[4];
- struct spi_transfer t[2];
- struct spi_message m;
- int err;
-
- if (!vsc7385_is_addr_valid(block, subblock))
- return -EINVAL;
-
- spi_message_init(&m);
-
- memset(&t, 0, sizeof(t));
-
- t[0].tx_buf = cmd;
- t[0].len = sizeof(cmd);
- spi_message_add_tail(&t[0], &m);
-
- t[1].tx_buf = buf;
- t[1].len = sizeof(buf);
- spi_message_add_tail(&t[1], &m);
-
- cmd[0] = vsc7385_make_addr(VSC73XX_CMD_MODE_WRITE, block, subblock);
- cmd[1] = reg;
-
- buf[0] = (value >> 24) & 0xff;
- buf[1] = (value >> 16) & 0xff;
- buf[2] = (value >> 8) & 0xff;
- buf[3] = value & 0xff;
-
- mutex_lock(&vsc->lock);
- err = spi_sync(vsc->spi, &m);
- mutex_unlock(&vsc->lock);
-
- return err;
-}
-
-static inline int vsc7385_write_verify(struct vsc7385 *vsc, u8 block,
- u8 subblock, u8 reg, u32 value,
- u32 read_mask, u32 read_val)
-{
- struct spi_device *spi = vsc->spi;
- u32 t;
- int err;
-
- err = vsc7385_write(vsc, block, subblock, reg, value);
- if (err)
- return err;
-
- err = vsc7385_read(vsc, block, subblock, reg, &t);
- if (err)
- return err;
-
- if ((t & read_mask) != read_val) {
- dev_err(&spi->dev, "register write error\n");
- return -EIO;
- }
-
- return 0;
-}
-
-static inline int vsc7385_set_clock_delay(struct vsc7385 *vsc, u32 val)
-{
- return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0,
- VSC73XX_ICPU_CLOCK_DELAY, val);
-}
-
-static inline int vsc7385_get_clock_delay(struct vsc7385 *vsc, u32 *val)
-{
- return vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
- VSC73XX_ICPU_CLOCK_DELAY, val);
-}
-
-static inline int vsc7385_icpu_stop(struct vsc7385 *vsc)
-{
- return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL,
- VSC73XX_ICPU_CTRL_STOP);
-}
-
-static inline int vsc7385_icpu_start(struct vsc7385 *vsc)
-{
- return vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_CTRL,
- VSC73XX_ICPU_CTRL_START);
-}
-
-static inline int vsc7385_icpu_reset(struct vsc7385 *vsc)
-{
- int rc;
-
- rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_ICPU_ADDR,
- 0x0000);
- if (rc)
- dev_err(&vsc->spi->dev,
- "could not reset microcode, err=%d\n", rc);
-
- return rc;
-}
-
-static int vsc7385_upload_ucode(struct vsc7385 *vsc)
-{
- struct spi_device *spi = vsc->spi;
- const struct firmware *firmware;
- char *ucode_name;
- unsigned char *dp;
- unsigned int curVal;
- int i;
- int diffs;
- int rc;
-
- ucode_name = (vsc->pdata->ucode_name) ? vsc->pdata->ucode_name
- : "vsc7385_ucode.bin";
- rc = request_firmware(&firmware, ucode_name, &spi->dev);
- if (rc) {
- dev_err(&spi->dev, "request_firmware failed, err=%d\n",
- rc);
- return rc;
- }
-
- rc = vsc7385_icpu_stop(vsc);
- if (rc)
- goto out;
-
- rc = vsc7385_icpu_reset(vsc);
- if (rc)
- goto out;
-
- dev_info(&spi->dev, "uploading microcode...\n");
-
- dp = (unsigned char *) firmware->data;
- for (i = 0; i < firmware->size; i++) {
- rc = vsc7385_write(vsc, VSC73XX_BLOCK_SYSTEM, 0,
- VSC73XX_ICPU_SRAM, *dp++);
- if (rc) {
- dev_err(&spi->dev, "could not load microcode, err=%d\n",
- rc);
- goto out;
- }
- }
-
- rc = vsc7385_icpu_reset(vsc);
- if (rc)
- goto out;
-
- dev_info(&spi->dev, "verifying microcode...\n");
-
- dp = (unsigned char *) firmware->data;
- diffs = 0;
- for (i = 0; i < firmware->size; i++) {
- rc = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
- VSC73XX_ICPU_SRAM, &curVal);
- if (rc) {
- dev_err(&spi->dev, "could not read microcode %d\n",
- rc);
- goto out;
- }
-
- if (curVal > 0xff) {
- dev_err(&spi->dev, "bad val read: %04x : %02x %02x\n",
- i, *dp, curVal);
- rc = -EIO;
- goto out;
- }
-
- if ((curVal & 0xff) != *dp) {
- diffs++;
- dev_err(&spi->dev, "verify error: %04x : %02x %02x\n",
- i, *dp, curVal);
-
- if (diffs > 4)
- break;
- }
- dp++;
- }
-
- if (diffs) {
- dev_err(&spi->dev, "microcode verification failed\n");
- rc = -EIO;
- goto out;
- }
-
- dev_info(&spi->dev, "microcode uploaded\n");
-
- rc = vsc7385_icpu_start(vsc);
-
-out:
- release_firmware(firmware);
- return rc;
-}
-
-static int vsc7385_setup(struct vsc7385 *vsc)
-{
- struct vsc7385_platform_data *pdata = vsc->pdata;
- u32 t;
- int err;
-
- err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_SYSTEM, 0,
- VSC73XX_ICPU_CLOCK_DELAY,
- VSC7385_CLOCK_DELAY,
- VSC7385_CLOCK_DELAY_MASK,
- VSC7385_CLOCK_DELAY);
- if (err)
- goto err;
-
- err = vsc7385_write_verify(vsc, VSC73XX_BLOCK_MAC,
- VSC73XX_SUBBLOCK_PORT_MAC, VSC73XX_ADVPORTM,
- VSC7385_ADVPORTM_INIT,
- VSC7385_ADVPORTM_MASK,
- VSC7385_ADVPORTM_INIT);
- if (err)
- goto err;
-
- err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC,
- VSC73XX_MAC_CFG, VSC7385_MAC_CFG_RESET);
- if (err)
- goto err;
-
- t = VSC73XX_MAC_CFG_INIT;
- t |= VSC73XX_MAC_CFG_TX_IPG(pdata->mac_cfg.tx_ipg);
- t |= VSC73XX_MAC_CFG_CLK_SEL(pdata->mac_cfg.clk_sel);
- if (pdata->mac_cfg.bit2)
- t |= VSC73XX_MAC_CFG_BIT2;
-
- err = vsc7385_write(vsc, VSC73XX_BLOCK_MAC, VSC73XX_SUBBLOCK_PORT_MAC,
- VSC73XX_MAC_CFG, t);
- if (err)
- goto err;
-
- return 0;
-
-err:
- return err;
-}
-
-static int vsc7385_detect(struct vsc7385 *vsc)
-{
- struct spi_device *spi = vsc->spi;
- u32 t;
- u32 id;
- u32 rev;
- int err;
-
- err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
- VSC73XX_ICPU_MBOX_VAL, &t);
- if (err) {
- dev_err(&spi->dev, "unable to read mailbox, err=%d\n", err);
- return err;
- }
-
- if (t == 0xffffffff) {
- dev_dbg(&spi->dev, "assert chip reset\n");
- if (vsc->pdata->reset)
- vsc->pdata->reset();
-
- }
-
- err = vsc7385_read(vsc, VSC73XX_BLOCK_SYSTEM, 0,
- VSC73XX_ICPU_CHIPID, &t);
- if (err) {
- dev_err(&spi->dev, "unable to read chip id, err=%d\n", err);
- return err;
- }
-
- id = (t >> VSC73XX_ICPU_CHIPID_ID_SHIFT) & VSC73XX_ICPU_CHIPID_ID_MASK;
- switch (id) {
- case VSC73XX_ICPU_CHIPID_ID_7385:
- case VSC73XX_ICPU_CHIPID_ID_7395:
- break;
- default:
- dev_err(&spi->dev, "unsupported chip, id=%04x\n", id);
- return -ENODEV;
- }
-
- rev = (t >> VSC73XX_ICPU_CHIPID_REV_SHIFT) &
- VSC73XX_ICPU_CHIPID_REV_MASK;
- dev_info(&spi->dev, "VSC%04X (rev. %d) switch found\n", id, rev);
-
- return 0;
-}
-
-static int vsc7385_probe(struct spi_device *spi)
-{
- struct vsc7385 *vsc;
- struct vsc7385_platform_data *pdata;
- int err;
-
- printk(KERN_INFO DRV_DESC " version " DRV_VERSION"\n");
-
- pdata = spi->dev.platform_data;
- if (!pdata) {
- dev_err(&spi->dev, "no platform data specified\n");
- return -ENODEV;
- }
-
- vsc = kzalloc(sizeof(*vsc), GFP_KERNEL);
- if (!vsc) {
- dev_err(&spi->dev, "no memory for private data\n");
- return -ENOMEM;
- }
-
- mutex_init(&vsc->lock);
- vsc->pdata = pdata;
- vsc->spi = spi_dev_get(spi);
- dev_set_drvdata(&spi->dev, vsc);
-
- spi->mode = SPI_MODE_0;
- spi->bits_per_word = 8;
- err = spi_setup(spi);
- if (err) {
- dev_err(&spi->dev, "spi_setup failed, err=%d\n", err);
- goto err_drvdata;
- }
-
- err = vsc7385_detect(vsc);
- if (err) {
- dev_err(&spi->dev, "no chip found, err=%d\n", err);
- goto err_drvdata;
- }
-
- err = vsc7385_upload_ucode(vsc);
- if (err)
- goto err_drvdata;
-
- err = vsc7385_setup(vsc);
- if (err)
- goto err_drvdata;
-
- return 0;
-
-err_drvdata:
- dev_set_drvdata(&spi->dev, NULL);
- kfree(vsc);
- return err;
-}
-
-static int vsc7385_remove(struct spi_device *spi)
-{
- struct vsc7385_data *vsc;
-
- vsc = dev_get_drvdata(&spi->dev);
- dev_set_drvdata(&spi->dev, NULL);
- kfree(vsc);
-
- return 0;
-}
-
-static struct spi_driver vsc7385_driver = {
- .driver = {
- .name = DRV_NAME,
- .bus = &spi_bus_type,
- .owner = THIS_MODULE,
- },
- .probe = vsc7385_probe,
- .remove = vsc7385_remove,
-};
-
-static int __init vsc7385_init(void)
-{
- return spi_register_driver(&vsc7385_driver);
-}
-module_init(vsc7385_init);
-
-static void __exit vsc7385_exit(void)
-{
- spi_unregister_driver(&vsc7385_driver);
-}
-module_exit(vsc7385_exit);
-
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-MODULE_LICENSE("GPL v2");
-
diff --git a/target/linux/ar71xx/files/include/linux/leds-nu801.h b/target/linux/ar71xx/files/include/linux/leds-nu801.h
deleted file mode 100644
index 0fc310d277..0000000000
--- a/target/linux/ar71xx/files/include/linux/leds-nu801.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#ifndef __LEDS_NU801_H__
-#define __LEDS_NU801_H__
-
-/*
- * Definitions for LED driver for NU801
- *
- * Kevin Paul Herbert
- * Copyright (c) 2012, Meraki, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/leds.h>
-
-struct led_nu801_template {
- const char *device_name; /* Name of the platform device */
- const char *name; /* Name of this LED chain */
- int num_leds; /* Number of LEDs in the chain */
- unsigned cki; /* GPIO pin for CKI */
- unsigned sdi; /* GPIO pin for SDI */
- int lei; /* GPIO pin for LEI; < 0 if none */
- u32 ndelay; /* Delay in nanoseconds */
- enum led_brightness init_brightness[3]; /* Default rgb state */
-#ifdef CONFIG_LEDS_TRIGGERS
- const char *default_trigger; /* default trigger */
-#endif
- const char *led_colors[3]; /* rgb color order */
-};
-
-struct led_nu801_platform_data {
- int num_controllers; /* Numnber of controllers */
- struct led_nu801_template *template; /* Template per controller */
-};
-
-#endif /* __LEDS_NU801_H__ */
diff --git a/target/linux/ar71xx/files/include/linux/nxp_74hc153.h b/target/linux/ar71xx/files/include/linux/nxp_74hc153.h
deleted file mode 100644
index 20b8845e53..0000000000
--- a/target/linux/ar71xx/files/include/linux/nxp_74hc153.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * NXP 74HC153 - Dual 4-input multiplexer defines
- *
- * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _NXP_74HC153_H
-#define _NXP_74HC153_H
-
-#define NXP_74HC153_DRIVER_NAME "nxp-74hc153"
-
-struct nxp_74hc153_platform_data {
- unsigned gpio_base;
- unsigned gpio_pin_s0;
- unsigned gpio_pin_s1;
- unsigned gpio_pin_1y;
- unsigned gpio_pin_2y;
-};
-
-#endif /* _NXP_74HC153_H */
diff --git a/target/linux/ar71xx/files/include/linux/platform/ar934x_nfc.h b/target/linux/ar71xx/files/include/linux/platform/ar934x_nfc.h
deleted file mode 100644
index 371aaee7f8..0000000000
--- a/target/linux/ar71xx/files/include/linux/platform/ar934x_nfc.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Platform data definition for the built-in NAND controller of the
- * Atheros AR934x SoCs
- *
- * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef _AR934X_NFC_PLATFORM_H
-#define _AR934X_NFC_PLATFORM_H
-
-#define AR934X_NFC_DRIVER_NAME "ar934x-nfc"
-
-struct mtd_info;
-struct mtd_partition;
-
-enum ar934x_nfc_ecc_mode {
- AR934X_NFC_ECC_SOFT = 0,
- AR934X_NFC_ECC_HW,
- AR934X_NFC_ECC_SOFT_BCH,
-};
-
-struct ar934x_nfc_platform_data {
- const char *name;
- struct mtd_partition *parts;
- int nr_parts;
-
- bool swap_dma;
- enum ar934x_nfc_ecc_mode ecc_mode;
-
- void (*hw_reset)(bool active);
- void (*select_chip)(int chip_no);
- int (*scan_fixup)(struct mtd_info *mtd);
-};
-
-#endif /* _AR934X_NFC_PLATFORM_H */
diff --git a/target/linux/ar71xx/files/include/linux/platform_data/gpio-latch.h b/target/linux/ar71xx/files/include/linux/platform_data/gpio-latch.h
deleted file mode 100644
index 0450e679ec..0000000000
--- a/target/linux/ar71xx/files/include/linux/platform_data/gpio-latch.h
+++ /dev/null
@@ -1,14 +0,0 @@
-#ifndef _GPIO_LATCH_H_
-#define _GPIO_LATCH_H_
-
-#define GPIO_LATCH_DRIVER_NAME "gpio-latch"
-
-struct gpio_latch_platform_data {
- int base;
- int num_gpios;
- int *gpios;
- int le_gpio_index;
- bool le_active_low;
-};
-
-#endif /* _GPIO_LATCH_H_ */
diff --git a/target/linux/ar71xx/files/include/linux/platform_data/rb91x_nand.h b/target/linux/ar71xx/files/include/linux/platform_data/rb91x_nand.h
deleted file mode 100644
index 5f17fb8148..0000000000
--- a/target/linux/ar71xx/files/include/linux/platform_data/rb91x_nand.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef _RB91X_NAND_H_
-#define _RB91X_NAND_H_
-
-#define RB91X_NAND_DRIVER_NAME "rb91x-nand"
-
-struct rb91x_nand_platform_data {
- int gpio_nce; /* chip enable, active low */
- int gpio_ale; /* address latch enable */
- int gpio_cle; /* command latch enable */
- int gpio_rdy;
- int gpio_read;
- int gpio_nrw; /* read/write enable, active low */
- int gpio_nle; /* latch enable, active low */
-};
-
-#endif /* _RB91X_NAND_H_ */ \ No newline at end of file
diff --git a/target/linux/ar71xx/files/include/linux/spi/vsc7385.h b/target/linux/ar71xx/files/include/linux/spi/vsc7385.h
deleted file mode 100644
index 1072ad7941..0000000000
--- a/target/linux/ar71xx/files/include/linux/spi/vsc7385.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Platform data definition for the Vitesse VSC7385 ethernet switch driver
- *
- * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-struct vsc7385_platform_data {
- void (*reset)(void);
- char *ucode_name;
- struct {
- u32 tx_ipg:5;
- u32 bit2:1;
- u32 clk_sel:3;
- } mac_cfg;
-};
diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
deleted file mode 100644
index 25b58ae91e..0000000000
--- a/target/linux/ar71xx/generic/config-default
+++ /dev/null
@@ -1,227 +0,0 @@
-CONFIG_ATH79_DEV_AP9X_PCI=y
-CONFIG_ATH79_DEV_ETH=y
-CONFIG_ATH79_DEV_GPIO_BUTTONS=y
-CONFIG_ATH79_DEV_LEDS_GPIO=y
-CONFIG_ATH79_DEV_M25P80=y
-CONFIG_ATH79_DEV_NFC=y
-CONFIG_ATH79_DEV_SPI=y
-CONFIG_ATH79_DEV_USB=y
-CONFIG_ATH79_DEV_WMAC=y
-CONFIG_ATH79_MACH_A60=y
-CONFIG_ATH79_MACH_ALFA_AP120C=y
-CONFIG_ATH79_MACH_ALFA_AP96=y
-CONFIG_ATH79_MACH_ALFA_NX=y
-CONFIG_ATH79_MACH_ALL0258N=y
-CONFIG_ATH79_MACH_ALL0315N=y
-CONFIG_ATH79_MACH_ANTMINER_S1=y
-CONFIG_ATH79_MACH_ANTMINER_S3=y
-CONFIG_ATH79_MACH_ANTROUTER_R1=y
-CONFIG_ATH79_MACH_AP121=y
-CONFIG_ATH79_MACH_AP121F=y
-CONFIG_ATH79_MACH_AP132=y
-CONFIG_ATH79_MACH_AP136=y
-CONFIG_ATH79_MACH_AP143=y
-CONFIG_ATH79_MACH_AP147=y
-CONFIG_ATH79_MACH_AP152=y
-CONFIG_ATH79_MACH_AP531B0=y
-CONFIG_ATH79_MACH_AP90Q=y
-CONFIG_ATH79_MACH_AP91_5G=y
-CONFIG_ATH79_MACH_AP96=y
-CONFIG_ATH79_MACH_ARCHER_C25_V1=y
-CONFIG_ATH79_MACH_ARCHER_C58_V1=y
-CONFIG_ATH79_MACH_ARCHER_C59_V1=y
-CONFIG_ATH79_MACH_ARCHER_C60_V1=y
-CONFIG_ATH79_MACH_ARCHER_C60_V2=y
-CONFIG_ATH79_MACH_ARCHER_C7=y
-CONFIG_ATH79_MACH_ARDUINO_YUN=y
-CONFIG_ATH79_MACH_AW_NR580=y
-CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
-CONFIG_ATH79_MACH_BSB=y
-CONFIG_ATH79_MACH_C55=y
-CONFIG_ATH79_MACH_CAP324=y
-CONFIG_ATH79_MACH_CAP4200AG=y
-CONFIG_ATH79_MACH_CARAMBOLA2=y
-CONFIG_ATH79_MACH_CF_E316N_V2=y
-CONFIG_ATH79_MACH_CF_E320N_V2=y
-CONFIG_ATH79_MACH_CF_E355AC=y
-CONFIG_ATH79_MACH_CF_E375AC=y
-CONFIG_ATH79_MACH_CF_E380AC_V1=y
-CONFIG_ATH79_MACH_CF_E380AC_V2=y
-CONFIG_ATH79_MACH_CF_E520N=y
-CONFIG_ATH79_MACH_CF_E530N=y
-CONFIG_ATH79_MACH_CPE505N=y
-CONFIG_ATH79_MACH_CPE510=y
-CONFIG_ATH79_MACH_CPE830=y
-CONFIG_ATH79_MACH_CPE870=y
-CONFIG_ATH79_MACH_CR3000=y
-CONFIG_ATH79_MACH_CR5000=y
-CONFIG_ATH79_MACH_DAP_1330_A1=y
-CONFIG_ATH79_MACH_DAP_2695_A1=y
-CONFIG_ATH79_MACH_DB120=y
-CONFIG_ATH79_MACH_DGL_5500_A1=y
-CONFIG_ATH79_MACH_DHP_1565_A1=y
-CONFIG_ATH79_MACH_DIR_505_A1=y
-CONFIG_ATH79_MACH_DIR_825_B1=y
-CONFIG_ATH79_MACH_DIR_825_C1=y
-CONFIG_ATH79_MACH_DIR_869_A1=y
-CONFIG_ATH79_MACH_DLAN_HOTSPOT=y
-CONFIG_ATH79_MACH_DLAN_PRO_1200_AC=y
-CONFIG_ATH79_MACH_DLAN_PRO_500_WP=y
-CONFIG_ATH79_MACH_DR342=y
-CONFIG_ATH79_MACH_DR344=y
-CONFIG_ATH79_MACH_DR531=y
-CONFIG_ATH79_MACH_DRAGINO2=y
-CONFIG_ATH79_MACH_E1700AC_V2=y
-CONFIG_ATH79_MACH_E2100L=y
-CONFIG_ATH79_MACH_E558_V2=y
-CONFIG_ATH79_MACH_E600G_V2=y
-CONFIG_ATH79_MACH_E750A_V4=y
-CONFIG_ATH79_MACH_E750G_V8=y
-CONFIG_ATH79_MACH_EAP120=y
-CONFIG_ATH79_MACH_EAP300V2=y
-CONFIG_ATH79_MACH_EAP7660D=y
-CONFIG_ATH79_MACH_EL_M150=y
-CONFIG_ATH79_MACH_EL_MINI=y
-CONFIG_ATH79_MACH_EPG5000=y
-CONFIG_ATH79_MACH_ESR1750=y
-CONFIG_ATH79_MACH_ESR900=y
-CONFIG_ATH79_MACH_EW_BALIN=y
-CONFIG_ATH79_MACH_EW_DORIN=y
-CONFIG_ATH79_MACH_FRITZ300E=y
-CONFIG_ATH79_MACH_FRITZ4020=y
-CONFIG_ATH79_MACH_FRITZ450E=y
-CONFIG_ATH79_MACH_GL_AR150=y
-CONFIG_ATH79_MACH_GL_AR300=y
-CONFIG_ATH79_MACH_GL_AR300M=y
-CONFIG_ATH79_MACH_GL_AR750=y
-CONFIG_ATH79_MACH_GL_AR750S=y
-CONFIG_ATH79_MACH_GL_DOMINO=y
-CONFIG_ATH79_MACH_GL_INET=y
-CONFIG_ATH79_MACH_GL_MIFI=y
-CONFIG_ATH79_MACH_GL_USB150=y
-CONFIG_ATH79_MACH_GS_MINIBOX_V32=y
-CONFIG_ATH79_MACH_GS_OOLITE_V1=y
-CONFIG_ATH79_MACH_GS_OOLITE_V5_2=y
-CONFIG_ATH79_MACH_HIWIFI_HC6361=y
-CONFIG_ATH79_MACH_HORNET_UB=y
-CONFIG_ATH79_MACH_JA76PF=y
-CONFIG_ATH79_MACH_JWAP003=y
-CONFIG_ATH79_MACH_JWAP230=y
-CONFIG_ATH79_MACH_KOALA=y
-CONFIG_ATH79_MACH_LAN_TURTLE=y
-CONFIG_ATH79_MACH_LIMA=y
-CONFIG_ATH79_MACH_MC_MAC1200R=y
-CONFIG_ATH79_MACH_MR12=y
-CONFIG_ATH79_MACH_MR16=y
-CONFIG_ATH79_MACH_MR1750=y
-CONFIG_ATH79_MACH_MR600=y
-CONFIG_ATH79_MACH_MR900=y
-CONFIG_ATH79_MACH_MYNET_N600=y
-CONFIG_ATH79_MACH_MYNET_N750=y
-CONFIG_ATH79_MACH_MYNET_REXT=y
-CONFIG_ATH79_MACH_MZK_W04NU=y
-CONFIG_ATH79_MACH_MZK_W300NH=y
-CONFIG_ATH79_MACH_N5Q=y
-CONFIG_ATH79_MACH_NBG6716=y
-CONFIG_ATH79_MACH_OM2P=y
-CONFIG_ATH79_MACH_OM5P=y
-CONFIG_ATH79_MACH_OM5P_AC=y
-CONFIG_ATH79_MACH_OM5P_ACv2=y
-CONFIG_ATH79_MACH_OMY_G1=y
-CONFIG_ATH79_MACH_OMY_X1=y
-CONFIG_ATH79_MACH_ONION_OMEGA=y
-CONFIG_ATH79_MACH_PB42=y
-CONFIG_ATH79_MACH_PB44=y
-CONFIG_ATH79_MACH_PQI_AIR_PEN=y
-CONFIG_ATH79_MACH_QIHOO_C301=y
-CONFIG_ATH79_MACH_R36A=y
-CONFIG_ATH79_MACH_R602N=y
-CONFIG_ATH79_MACH_RE355=y
-CONFIG_ATH79_MACH_RE450=y
-CONFIG_ATH79_MACH_RME_EG200=y
-CONFIG_ATH79_MACH_RUT9XX=y
-CONFIG_ATH79_MACH_RW2458N=y
-CONFIG_ATH79_MACH_SC1750=y
-CONFIG_ATH79_MACH_SC300M=y
-CONFIG_ATH79_MACH_SC450=y
-CONFIG_ATH79_MACH_SMART_300=y
-CONFIG_ATH79_MACH_SOM9331=y
-CONFIG_ATH79_MACH_SR3200=y
-CONFIG_ATH79_MACH_T830=y
-CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE=y
-CONFIG_ATH79_MACH_TEW_673GRU=y
-CONFIG_ATH79_MACH_TEW_732BR=y
-CONFIG_ATH79_MACH_TEW_823DRU=y
-CONFIG_ATH79_MACH_TL_MR3X20=y
-CONFIG_ATH79_MACH_TL_MR6400=y
-CONFIG_ATH79_MACH_TL_WDR3500=y
-CONFIG_ATH79_MACH_TL_WDR4300=y
-CONFIG_ATH79_MACH_TL_WDR6500_V2=y
-CONFIG_ATH79_MACH_TL_WPA8630=y
-CONFIG_ATH79_MACH_TL_WR1043ND=y
-CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
-CONFIG_ATH79_MACH_TL_WR1043ND_V4=y
-CONFIG_ATH79_MACH_TL_WR1043N_V5=y
-CONFIG_ATH79_MACH_TL_WR2543N=y
-CONFIG_ATH79_MACH_TL_WR703N=y
-CONFIG_ATH79_MACH_TL_WR720N_V3=y
-CONFIG_ATH79_MACH_TL_WR810N=y
-CONFIG_ATH79_MACH_TL_WR810N_V2=y
-CONFIG_ATH79_MACH_TL_WR841N_V8=y
-CONFIG_ATH79_MACH_TL_WR841N_V9=y
-CONFIG_ATH79_MACH_TL_WR902AC_V1=y
-CONFIG_ATH79_MACH_TL_WR942N_V1=y
-CONFIG_ATH79_MACH_TS_D084=y
-CONFIG_ATH79_MACH_TUBE2H=y
-CONFIG_ATH79_MACH_UBNT=y
-CONFIG_ATH79_MACH_UBNT_UNIFIAC=y
-CONFIG_ATH79_MACH_UBNT_XM=y
-CONFIG_ATH79_MACH_WAM250=y
-CONFIG_ATH79_MACH_WEIO=y
-CONFIG_ATH79_MACH_WHR_HP_G300N=y
-CONFIG_ATH79_MACH_WIFI_PINEAPPLE_NANO=y
-CONFIG_ATH79_MACH_WLAE_AG300N=y
-CONFIG_ATH79_MACH_WLR8100=y
-CONFIG_ATH79_MACH_WNDAP360=y
-CONFIG_ATH79_MACH_WNDR3700=y
-CONFIG_ATH79_MACH_WNR2200=y
-CONFIG_ATH79_MACH_WP543=y
-CONFIG_ATH79_MACH_WPE72=y
-CONFIG_ATH79_MACH_WPJ342=y
-CONFIG_ATH79_MACH_WPJ344=y
-CONFIG_ATH79_MACH_WPJ531=y
-CONFIG_ATH79_MACH_WPJ558=y
-CONFIG_ATH79_MACH_WPJ563=y
-CONFIG_ATH79_MACH_WRT160NL=y
-CONFIG_ATH79_MACH_WRT400N=y
-CONFIG_ATH79_MACH_WRTNODE2Q=y
-CONFIG_ATH79_MACH_WZR_450HP2=y
-CONFIG_ATH79_MACH_WZR_HP_AG300H=y
-CONFIG_ATH79_MACH_WZR_HP_G300NH=y
-CONFIG_ATH79_MACH_WZR_HP_G300NH2=y
-CONFIG_ATH79_MACH_WZR_HP_G450H=y
-CONFIG_ATH79_MACH_XD3200=y
-CONFIG_ATH79_MACH_ZCN_1523H=y
-CONFIG_ATH79_NVRAM=y
-CONFIG_ATH79_PCI_ATH9K_FIXUP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_GPIO_PCA953X=y
-# CONFIG_GPIO_PCA953X_IRQ is not set
-CONFIG_HW_HAS_PCI=y
-# CONFIG_LEDS_WNDR3700_USB is not set
-CONFIG_MYLOADER=y
-CONFIG_PCI=y
-CONFIG_PCI_AR724X=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_SERIAL_AR933X=y
-CONFIG_SERIAL_AR933X_CONSOLE=y
-CONFIG_SERIAL_AR933X_NR_UARTS=2
-CONFIG_SOC_AR71XX=y
-CONFIG_SOC_AR724X=y
-CONFIG_SOC_AR913X=y
-CONFIG_SOC_AR933X=y
-CONFIG_SOC_AR934X=y
-CONFIG_SOC_QCA953X=y
-CONFIG_SOC_QCA955X=y
-CONFIG_SOC_QCA956X=y
diff --git a/target/linux/ar71xx/generic/profiles/00-default.mk b/target/linux/ar71xx/generic/profiles/00-default.mk
deleted file mode 100644
index 18fd385cc3..0000000000
--- a/target/linux/ar71xx/generic/profiles/00-default.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Copyright (C) 2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Default
- NAME:=Default Profile (all drivers)
- PACKAGES:= \
- kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
- PRIORITY := 1
-endef
-
-define Profile/Default/Description
- Default package set compatible with most boards.
-endef
-$(eval $(call Profile,Default))
diff --git a/target/linux/ar71xx/generic/target.mk b/target/linux/ar71xx/generic/target.mk
deleted file mode 100644
index 0a26110d27..0000000000
--- a/target/linux/ar71xx/generic/target.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-BOARDNAME:=Generic
-FEATURES += squashfs
-
-DEFAULT_PACKAGES += wpad-basic
-
-define Target/Description
- Build firmware images for generic Atheros AR71xx/AR913x/AR934x based boards.
-endef
-
-
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
deleted file mode 100644
index dea8338ddd..0000000000
--- a/target/linux/ar71xx/image/Makefile
+++ /dev/null
@@ -1,69 +0,0 @@
-#
-# Copyright (C) 2008-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-KERNEL_LOADADDR = 0x80060000
-
-DEVICE_VARS += BOARDNAME CMDLINE CONSOLE LOADER_TYPE
-
-ifeq ($(SUBTARGET),generic)
-include ./generic.mk
-include ./generic-legacy-devices.mk
-include ./generic-tp-link.mk
-include ./generic-ubnt.mk
-endif
-ifeq ($(SUBTARGET),tiny)
-include ./tiny.mk
-include ./tiny-tp-link.mk
-include ./tiny-legacy-devices.mk
-include ./tiny-senao.mk
-endif
-ifeq ($(SUBTARGET),nand)
-include ./nand.mk
-endif
-ifeq ($(SUBTARGET),mikrotik)
-include ./mikrotik.mk
-endif
-include ./legacy.mk
-
-define Build/loader-common
- rm -rf $@.src
- $(MAKE) -C lzma-loader \
- PKG_BUILD_DIR="$@.src" \
- TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \
- BOARD="$(BOARDNAME)" \
- LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
- $(1) compile loader.$(LOADER_TYPE)
- mv "$@.$(LOADER_TYPE)" "$@"
- rm -rf $@.src
-endef
-
-define Build/loader-kernel
- $(call Build/loader-common,LOADER_DATA="$@")
-endef
-
-define Build/loader-kernel-cmdline
- $(call Build/loader-common,LOADER_DATA="$@" KERNEL_CMDLINE="$(CMDLINE)")
-endef
-
-define Device/Default
- BOARDNAME :=
- DEVICE_PROFILE = $$(BOARDNAME)
- PROFILES = Default Minimal $$(DEVICE_PROFILE)
- MTDPARTS :=
- BLOCKSIZE := 64k
- CONSOLE := ttyS0,115200
- CMDLINE = $$(if $$(BOARDNAME),board=$$(BOARDNAME)) $$(if $$(MTDPARTS),mtdparts=$$(MTDPARTS)) $$(if $$(CONSOLE),console=$$(CONSOLE))
- KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
- COMPILE :=
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
-endef
-
-$(eval $(call BuildImage))
diff --git a/target/linux/ar71xx/image/common-tp-link.mk b/target/linux/ar71xx/image/common-tp-link.mk
deleted file mode 100644
index 99acd7e584..0000000000
--- a/target/linux/ar71xx/image/common-tp-link.mk
+++ /dev/null
@@ -1,108 +0,0 @@
-DEVICE_VARS += LOADER_FLASH_OFFS TPLINK_BOARD_ID TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION TPLINK_HWID TPLINK_HWREV
-
-# Arguments: <output name> <kernel offset>
-define Build/loader-okli
- dd if=$(KDIR)/loader-$(word 1,$(1)).$(LOADER_TYPE) bs=$(word 2,$(1)) conv=sync of="$@.new"
- cat "$@" >> "$@.new"
- mv "$@.new" "$@"
-endef
-
-define Build/loader-okli-compile
- $(call Build/loader-common,FLASH_OFFS=$(LOADER_FLASH_OFFS) FLASH_MAX=0 KERNEL_CMDLINE="$(CMDLINE)")
-endef
-
-# combine kernel and rootfs into one image
-# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
-# <type> is "sysupgrade" or "factory"
-#
-# -a align the rootfs start on an <align> bytes boundary
-# -j add jffs2 end-of-filesystem markers
-# -s strip padding from end of the image
-# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
-define Build/mktplinkfw
- -$(STAGING_DIR_HOST)/bin/mktplinkfw \
- -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \
- -m $(TPLINK_HEADER_VERSION) \
- -k $(IMAGE_KERNEL) \
- -r $@ \
- -o $@.new \
- -j -X 0x40000 \
- -a $(call rootfs_align,$(FILESYSTEM)) \
- $(wordlist 2,$(words $(1)),$(1)) \
- $(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
-endef
-
-define Build/uImageArcher
- mkimage -A $(LINUX_KARCH) \
- -O linux -T kernel \
- -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
- -n '$(call toupper,$(LINUX_KARCH)) OpenWrt Linux-$(LINUX_VERSION)' -d $@ $@.new
- @mv $@.new $@
-endef
-
-
-define Device/tplink
- TPLINK_HWREV := 0x1
- TPLINK_HEADER_VERSION := 1
- IMAGES := sysupgrade.bin factory.bin
-endef
-
-define Device/tplink-lzma
- $(Device/tplink)
- KERNEL := kernel-bin | patch-cmdline | lzma
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header
- IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade
- IMAGE/factory.bin := append-rootfs | mktplinkfw factory
-endef
-
-define Device/tplink-nolzma
- $(Device/tplink)
- LOADER_TYPE := gz
- LOADER_FLASH_OFFS := 0x22000
- COMPILE := loader-$(1).gz
- COMPILE/loader-$(1).gz := loader-okli-compile
- KERNEL_NAME := vmlinux.bin.lzma
- KERNEL := kernel-bin | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 7680
- KERNEL_INITRAMFS_NAME := vmlinux-initramfs.bin.lzma
- KERNEL_INITRAMFS := kernel-bin | loader-kernel-cmdline | tplink-v1-header
- IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade
- IMAGE/factory.bin := append-rootfs | mktplinkfw factory
-endef
-
-define Device/tplink-safeloader
- $(Device/tplink)
- KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
- IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade | \
- append-metadata | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
-endef
-
-define Device/tplink-4m
- $(Device/tplink-nolzma)
- TPLINK_FLASHLAYOUT := 4M
- IMAGE_SIZE := 3904k
-endef
-
-define Device/tplink-8m
- $(Device/tplink-nolzma)
- TPLINK_FLASHLAYOUT := 8M
- IMAGE_SIZE := 7936k
-endef
-
-define Device/tplink-4mlzma
- $(Device/tplink-lzma)
- TPLINK_FLASHLAYOUT := 4Mlzma
- IMAGE_SIZE := 3904k
-endef
-
-define Device/tplink-8mlzma
- $(Device/tplink-lzma)
- TPLINK_FLASHLAYOUT := 8Mlzma
- IMAGE_SIZE := 7936k
-endef
-
-define Device/tplink-16mlzma
- $(Device/tplink-lzma)
- TPLINK_FLASHLAYOUT := 16Mlzma
- IMAGE_SIZE := 15872k
-endef
diff --git a/target/linux/ar71xx/image/generic-legacy-devices.mk b/target/linux/ar71xx/image/generic-legacy-devices.mk
deleted file mode 100644
index cbe039cd29..0000000000
--- a/target/linux/ar71xx/image/generic-legacy-devices.mk
+++ /dev/null
@@ -1,423 +0,0 @@
-define LegacyDevice/A60
- DEVICE_TITLE := OpenMesh A40/A60
- DEVICE_PACKAGES := om-watchdog kmod-ath10k-ct ath10k-firmware-qca988x-ct \
- mod-usb-core kmod-usb2
-endef
-LEGACY_DEVICES += A60
-
-define LegacyDevice/ALFANX
- DEVICE_TITLE := ALFA Network N2/N5 board
-endef
-LEGACY_DEVICES += ALFANX
-
-define LegacyDevice/HORNETUB
- DEVICE_TITLE := ALFA Network Hornet-UB board (8MB flash, 32MB ram)
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += HORNETUB
-
-define LegacyDevice/TUBE2H8M
- DEVICE_TITLE := ALFA Network Tube2H board (8MB flash)
-endef
-LEGACY_DEVICES += TUBE2H8M
-
-define LegacyDevice/AP96
- DEVICE_TITLE := Atheros AP96 reference board
- DEVICE_PACKAGES := kmod-usb2
-endef
-LEGACY_DEVICES += AP96
-
-define LegacyDevice/WNDAP360
- DEVICE_TITLE := NETGEAR WNDAP360
-endef
-LEGACY_DEVICES += WNDAP360
-
-define LegacyDevice/ALFAAP120C
- DEVICE_TITLE := ALFA Network AP120C board
-endef
-LEGACY_DEVICES += ALFAAP120C
-
-define LegacyDevice/ALFAAP96
- DEVICE_TITLE := ALFA Network AP96 board
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-rtc-pcf2123
-endef
-LEGACY_DEVICES += ALFAAP96
-
-define LegacyDevice/ALL0258N
- DEVICE_TITLE := Allnet ALL0258N
- DEVICE_PACKAGES := rssileds
-endef
-LEGACY_DEVICES += ALL0258N
-
-define LegacyDevice/ALL0315N
- DEVICE_TITLE := Allnet ALL0315N
- DEVICE_PACKAGES := rssileds
-endef
-LEGACY_DEVICES += ALL0315N
-
-define LegacyDevice/AP121_8M
- DEVICE_TITLE := Atheros AP121 reference board (8MB flash)
- DEVICE_PACKAGES := kmod-usb2
-endef
-LEGACY_DEVICES += AP121_8M
-
-define LegacyDevice/AP121_16M
- DEVICE_TITLE := Atheros AP121 reference board (16MB flash)
- DEVICE_PACKAGES := kmod-usb2
-endef
-LEGACY_DEVICES += AP121_16M
-
-define LegacyDevice/AP132
- DEVICE_TITLE := Atheros AP132 reference board
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage
-endef
-LEGACY_DEVICES += AP132
-
-define LegacyDevice/AP135
- DEVICE_TITLE := Atheros AP135 reference board
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage
-endef
-LEGACY_DEVICES += AP135
-
-define LegacyDevice/AP136_010
- DEVICE_TITLE := Atheros AP136-010 reference board
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage
-endef
-LEGACY_DEVICES += AP136_010
-
-define LegacyDevice/AP136_020
- DEVICE_TITLE := Atheros AP136-020 reference board
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage
-endef
-LEGACY_DEVICES += AP136_020
-
-define LegacyDevice/AP143_8M
- DEVICE_TITLE := Qualcomm Atheros AP143 reference board (8MB flash)
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage
-endef
-LEGACY_DEVICES += AP143_8M
-
-define LegacyDevice/AP143_16M
- DEVICE_TITLE := Qualcomm Atheros AP143 reference board (16MB flash)
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage
-endef
-LEGACY_DEVICES += AP143_16M
-
-define LegacyDevice/AP147_010
- DEVICE_TITLE := Qualcomm Atheros AP147-010 reference board
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage
-endef
-LEGACY_DEVICES += AP147_010
-
-define LegacyDevice/AP152_16M
- DEVICE_TITLE := Qualcomm Atheros AP152 reference board (16MB flash)
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage
-endef
-LEGACY_DEVICES += AP152_16M
-
-define LegacyDevice/BXU2000N2
- DEVICE_TITLE := BHU BXU2000n-2
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage
-endef
-LEGACY_DEVICES += BXU2000N2
-
-define LegacyDevice/CAP4200AG
- DEVICE_TITLE := Senao CAP4200AG
-endef
-LEGACY_DEVICES += CAP4200AG
-
-define LegacyDevice/DB120
- DEVICE_TITLE := Atheros DB120 reference board
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage
-endef
-LEGACY_DEVICES += DB120
-
-define LegacyDevice/HORNETUBx2
- DEVICE_TITLE := ALFA Network Hornet-UB-x2 board (16MB flash, 64MB ram)
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += HORNETUBx2
-
-define LegacyDevice/TUBE2H16M
- DEVICE_TITLE := ALFA Network Tube2H board (16MB flash)
-endef
-LEGACY_DEVICES += TUBE2H16M
-
-define LegacyDevice/DIR505A1
- DEVICE_TITLE := D-Link DIR-505 rev. A1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += DIR505A1
-
-define LegacyDevice/DGL5500A1
- DEVICE_TITLE := D-Link DGL-5500 rev. A1
- DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
-endef
-LEGACY_DEVICES += DGL5500A1
-
-define LegacyDevice/TEW823DRU
- DEVICE_TITLE := TRENDNet TEW-823DRU
- DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
-endef
-LEGACY_DEVICES += TEW823DRU
-
-define LegacyDevice/DHP1565A1
- DEVICE_TITLE := D-Link DHP-1565 rev. A1
- DEVICE_PACKAGES := kmod-usb2
-endef
-LEGACY_DEVICES += DHP1565A1
-
-define LegacyDevice/DIR825C1
- DEVICE_TITLE := D-Link DIR-825 rev. C1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += DIR825C1
-
-define LegacyDevice/DIR835A1
- DEVICE_TITLE := D-Link DIR-835 rev. A1
- DEVICE_PACKAGES := kmod-usb2
-endef
-LEGACY_DEVICES += DIR835A1
-
-define LegacyDevice/TEW732BR
- DEVICE_TITLE := TRENDNet TEW-732BR
-endef
-LEGACY_DEVICES += TEW732BR
-
-define LegacyDevice/WRT160NL
- DEVICE_TITLE := Linksys WRT160NL
- DEVICE_PACKAGES := kmod-usb2
-endef
-LEGACY_DEVICES += WRT160NL
-
-define LegacyDevice/MYNETREXT
- DEVICE_TITLE := Western Digital My Net Wi-Fi Range Extender
- DEVICE_PACKAGES := rssileds
-endef
-LEGACY_DEVICES += MYNETREXT
-
-define LegacyDevice/DIR825B1
- DEVICE_TITLE := D-Link DIR-825 rev. B1
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += DIR825B1
-
-define LegacyDevice/TEW673GRU
- DEVICE_TITLE := TRENDNet TEW-673GRU
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
-endef
-LEGACY_DEVICES += TEW673GRU
-
-define LegacyDevice/DLRTDEV01
- DEVICE_TITLE := PowerCloud Systems dlrtdev01 model
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += DLRTDEV01
-
-define LegacyDevice/dLAN_Hotspot
- DEVICE_TITLE := devolo dLAN Hotspot
-endef
-LEGACY_DEVICES += dLAN_Hotspot
-
-define LegacyDevice/dLAN_pro_500_wp
- DEVICE_TITLE := devolo dLAN pro 500 Wireless+
-endef
-LEGACY_DEVICES += dLAN_pro_500_wp
-
-define LegacyDevice/dLAN_pro_1200_ac
- DEVICE_TITLE := devolo dLAN pro 1200+ WiFi ac
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
-endef
-LEGACY_DEVICES += dLAN_pro_1200_ac
-
-define LegacyDevice/ESR900
- DEVICE_TITLE := EnGenius ESR900
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += ESR900
-
-define LegacyDevice/ESR1750
- DEVICE_TITLE := EnGenius ESR1750
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-ath10k-ct ath10k-firmware-qca988x-ct
-endef
-LEGACY_DEVICES += ESR1750
-
-define LegacyDevice/EPG5000
- DEVICE_TITLE := EnGenius EPG5000
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-ath10k-ct ath10k-firmware-qca988x-ct
-endef
-LEGACY_DEVICES += EPG5000
-
-define LegacyDevice/WP543_8M
- DEVICE_TITLE := Compex WP543/WPJ543 (8MB flash)
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
-endef
-LEGACY_DEVICES += WP543_8M
-
-define LegacyDevice/WP543_16M
- DEVICE_TITLE := Compex WP543/WPJ543 (16MB flash)
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
-endef
-LEGACY_DEVICES += WP543_16M
-
-define LegacyDevice/WPE72_8M
- DEVICE_TITLE := Compex WPE72/WPE72NX (8MB flash)
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
-endef
-LEGACY_DEVICES += WPE72_8M
-
-define LegacyDevice/WPE72_16M
- DEVICE_TITLE := Compex WPE72/WPE72NX (16MB flash)
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
-endef
-LEGACY_DEVICES += WPE72_16M
-
-define LegacyDevice/WNR2200
- DEVICE_TITLE := NETGEAR WNR2200
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += WNR2200
-
-define LegacyDevice/OM2P
- DEVICE_TITLE := OpenMesh OM2P/OM2P-HS/OM2P-LC
- DEVICE_PACKAGES := om-watchdog
-endef
-LEGACY_DEVICES += OM2P
-
-define LegacyDevice/OM5P
- DEVICE_TITLE := OpenMesh OM5P/OM5P-AN
- DEVICE_PACKAGES := om-watchdog
-endef
-LEGACY_DEVICES += OM5P
-
-define LegacyDevice/OM5PAC
- DEVICE_TITLE := OpenMesh OM5P-AC
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct om-watchdog
-endef
-LEGACY_DEVICES += OM5PAC
-
-define LegacyDevice/MR600
- DEVICE_TITLE := OpenMesh MR600
- DEVICE_PACKAGES := om-watchdog
-endef
-LEGACY_DEVICES += MR600
-
-define LegacyDevice/MR900
- DEVICE_TITLE := OpenMesh MR900
- DEVICE_PACKAGES := om-watchdog
-endef
-LEGACY_DEVICES += MR900
-
-define LegacyDevice/MR1750
- DEVICE_TITLE := OpenMesh MR1750
- DEVICE_PACKAGES := om-watchdog kmod-ath10k-ct ath10k-firmware-qca988x-ct
-endef
-LEGACY_DEVICES += MR1750
-
-define LegacyDevice/ALL0305
- DEVICE_TITLE := Allnet ALL0305
- DEVICE_PACKAGES := fconfig kmod-ath5k -kmod-ath9k
-endef
-LEGACY_DEVICES += ALL0305
-
-define LegacyDevice/EAP7660D
- DEVICE_TITLE := Senao EAP7660D
-endef
-LEGACY_DEVICES += EAP7660D
-
-define LegacyDevice/JA76PF
- DEVICE_TITLE := jjPlus JA76PF
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-hwmon-core kmod-i2c-core kmod-hwmon-lm75
-endef
-LEGACY_DEVICES += JA76PF
-
-define LegacyDevice/JA76PF2
- DEVICE_TITLE := jjPlus JA76PF2
-endef
-LEGACY_DEVICES += JA76PF2
-
-define LegacyDevice/JWAP003
- DEVICE_TITLE := jjPlus JWAP003
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
-endef
-LEGACY_DEVICES += JWAP003
-
-define LegacyDevice/PB42
- DEVICE_TITLE := Atheros PB42 reference board
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
-endef
-LEGACY_DEVICES += PB42
-
-define LegacyDevice/PB44
- DEVICE_TITLE := Atheros PB44 reference board
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 \
- vsc7385-ucode-pb44 vsc7395-ucode-pb44
-endef
-LEGACY_DEVICES += PB44
-
-define LegacyDevice/MZKW04NU
- DEVICE_TITLE := Planex MZK-W04NU
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += MZKW04NU
-
-define LegacyDevice/MZKW300NH
- DEVICE_TITLE := Planex MZK-W300NH
-endef
-LEGACY_DEVICES += MZKW300NH
-
-define LegacyDevice/EAP300V2
- DEVICE_TITLE := EnGenius EAP300V2
-endef
-LEGACY_DEVICES += EAP300V2
-
-define LegacyDevice/WRT400N
- DEVICE_TITLE := Linksys WRT400N
-endef
-LEGACY_DEVICES += WRT400N
-
-define LegacyDevice/WZRHPG300NH
- DEVICE_TITLE := Buffalo WZR-HP-G300NH
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += WZRHPG300NH
-
-define LegacyDevice/WZRHPG300NH2
- DEVICE_TITLE := Buffalo WZR-HP-G300NH2
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += WZRHPG300NH2
-
-define LegacyDevice/WZRHPAG300H
- DEVICE_TITLE := Buffalo WZR-HP-AG300H
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += WZRHPAG300H
-
-define LegacyDevice/WZRHPG450H
- DEVICE_TITLE := Buffalo WZR-HP-G450H
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += WZRHPG450H
-
-define LegacyDevice/WZR600DHP
- DEVICE_TITLE := Buffalo WZR-600DHP
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += WZR600DHP
-
-define LegacyDevice/WZR450HP2
- DEVICE_TITLE := Buffalo WZR-450HP2
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += WZR450HP2
-
-define LegacyDevice/ZCN1523H28
- DEVICE_TITLE := Zcomax ZCN-1523H-2-8
-endef
-LEGACY_DEVICES += ZCN1523H28
-
-define LegacyDevice/ZCN1523H516
- DEVICE_TITLE := Zcomax ZCN-1523H-5-16
-endef
-LEGACY_DEVICES += ZCN1523H516
diff --git a/target/linux/ar71xx/image/generic-tp-link.mk b/target/linux/ar71xx/image/generic-tp-link.mk
deleted file mode 100644
index dac5ad2850..0000000000
--- a/target/linux/ar71xx/image/generic-tp-link.mk
+++ /dev/null
@@ -1,544 +0,0 @@
-include ./common-tp-link.mk
-
-
-define Device/archer-cxx
- $(Device/tplink-safeloader)
- KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
-endef
-
-define Device/archer-c25-v1
- $(Device/archer-cxx)
- DEVICE_TITLE := TP-LINK Archer C25 v1
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct
- BOARDNAME := ARCHER-C25-V1
- TPLINK_BOARD_ID := ARCHER-C25-V1
- DEVICE_PROFILE := ARCHERC25V1
- IMAGE_SIZE := 7808k
- MTDPARTS := spi0.0:128k(factory-uboot)ro,64k(u-boot)ro,7808k(firmware),128k(config)ro,64k(art)ro
- SUPPORTED_DEVICES := archer-c25-v1
-endef
-TARGET_DEVICES += archer-c25-v1
-
-define Device/archer-c58-v1
- $(Device/archer-cxx)
- DEVICE_TITLE := TP-LINK Archer C58 v1
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
- BOARDNAME := ARCHER-C58-V1
- TPLINK_BOARD_ID := ARCHER-C58-V1
- DEVICE_PROFILE := ARCHERC58V1
- IMAGE_SIZE := 7936k
- MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,7936k(firmware),64k(tplink)ro,64k(art)ro
- SUPPORTED_DEVICES := archer-c58-v1
-endef
-TARGET_DEVICES += archer-c58-v1
-
-define Device/archer-c59-v1
- $(Device/archer-cxx)
- DEVICE_TITLE := TP-LINK Archer C59 v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca9888-ct
- BOARDNAME := ARCHER-C59-V1
- TPLINK_BOARD_ID := ARCHER-C59-V1
- DEVICE_PROFILE := ARCHERC59V1
- IMAGE_SIZE := 14528k
- MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,14528k(firmware),1664k(tplink)ro,64k(art)ro
- SUPPORTED_DEVICES := archer-c59-v1
-endef
-TARGET_DEVICES += archer-c59-v1
-
-define Device/archer-c59-v2
- $(Device/archer-c59-v1)
- DEVICE_TITLE := TP-LINK Archer C59 v2
- BOARDNAME := ARCHER-C59-V2
- TPLINK_BOARD_ID := ARCHER-C59-V2
- DEVICE_PROFILE := ARCHERC59V2
- IMAGE_SIZE := 14400k
- MTDPARTS := spi0.0:128k(factory-boot)ro,64k(u-boot)ro,64k(mac)ro,14400k(firmware),1664k(tplink)ro,64k@0xff0000(art)ro
- SUPPORTED_DEVICES := archer-c59-v2
-endef
-TARGET_DEVICES += archer-c59-v2
-
-define Device/archer-c60-v1
- $(Device/archer-cxx)
- DEVICE_TITLE := TP-LINK Archer C60 v1
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
- BOARDNAME := ARCHER-C60-V1
- TPLINK_BOARD_ID := ARCHER-C60-V1
- DEVICE_PROFILE := ARCHERC60V1
- IMAGE_SIZE := 7936k
- MTDPARTS := spi0.0:64k(u-boot)ro,64k(mac)ro,7936k(firmware),64k(tplink)ro,64k(art)ro
- SUPPORTED_DEVICES := archer-c60-v1
-endef
-TARGET_DEVICES += archer-c60-v1
-
-define Device/archer-c60-v2
- $(Device/archer-c60-v1)
- DEVICE_TITLE := TP-LINK Archer C60 v2
- BOARDNAME := ARCHER-C60-V2
- TPLINK_BOARD_ID := ARCHER-C60-V2
- DEVICE_PROFILE := ARCHERC60V2
- IMAGE_SIZE := 7808k
- MTDPARTS := spi0.0:192k(u-boot)ro,7808k(firmware),128k(tplink)ro,64k(art)ro
- SUPPORTED_DEVICES := archer-c60-v2
-endef
-TARGET_DEVICES += archer-c60-v2
-
-define Device/archer-c5-v1
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := TP-LINK Archer C5 v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := ARCHER-C5
- DEVICE_PROFILE := ARCHERC7
- TPLINK_HWID := 0xc5000001
-endef
-TARGET_DEVICES += archer-c5-v1
-
-define Device/archer-c7-v1
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK Archer C7 v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := ARCHER-C7
- DEVICE_PROFILE := ARCHERC7
- TPLINK_HWID := 0x75000001
-endef
-TARGET_DEVICES += archer-c7-v1
-
-define Device/archer-c7-v2
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := TP-LINK Archer C7 v2
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := ARCHER-C7-V2
- DEVICE_PROFILE := ARCHERC7
- TPLINK_HWID := 0xc7000002
- IMAGES := sysupgrade.bin factory.bin factory-us.bin factory-eu.bin
- IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
- IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
-endef
-TARGET_DEVICES += archer-c7-v2
-
-define Device/archer-c7-v2-il
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := TP-LINK Archer C7 v2 (IL)
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := ARCHER-C7-V2
- DEVICE_PROFILE := ARCHERC7
- TPLINK_HWID := 0xc7000002
- TPLINK_HWREV := 0x494c0001
-endef
-TARGET_DEVICES += archer-c7-v2-il
-
-define Device/tl-wdr7500-v3
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK Archer C7 v3
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := ARCHER-C7
- DEVICE_PROFILE := ARCHERC7
- TPLINK_HWID := 0x75000003
-endef
-TARGET_DEVICES += tl-wdr7500-v3
-
-define Device/archer-c7-v4
- $(Device/archer-cxx)
- DEVICE_TITLE := TP-LINK Archer C7 v4
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := ARCHER-C7-V4
- TPLINK_BOARD_ID := ARCHER-C7-V4
- IMAGE_SIZE := 15104k
- MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,15104k(firmware),960k(config)ro,64k(art)ro
- SUPPORTED_DEVICES := archer-c7-v4
-endef
-TARGET_DEVICES += archer-c7-v4
-
-define Device/archer-c7-v5
- $(Device/archer-c7-v4)
- DEVICE_TITLE := TP-LINK Archer C7 v5
- BOARDNAME := ARCHER-C7-V5
- TPLINK_BOARD_ID := ARCHER-C7-V5
- IMAGE_SIZE := 15360k
- MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,64k@0x50000(art)ro,128k@0x60000(info)ro,15360k@0xc0000(firmware)
- SUPPORTED_DEVICES := archer-c7-v5
-endef
-TARGET_DEVICES += archer-c7-v5
-
-define Device/cpe510-520-v1
- DEVICE_TITLE := TP-LINK CPE510/520 v1
- BOARDNAME := CPE510
- TPLINK_BOARD_ID := CPE510
- LOADER_TYPE := elf
- LOADER_FLASH_OFFS := 0x43000
- COMPILE := loader-$(1).elf
- COMPILE/loader-$(1).elf := loader-okli-compile
- KERNEL := kernel-bin | lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) 12288
- IMAGES += factory.bin
- IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
- IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
- DEVICE_PACKAGES := rssileds
- MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,2048k(kernel),5632k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware)
- IMAGE_SIZE := 7680k
-endef
-TARGET_DEVICES += cpe510-520-v1
-
-define Device/cpe510-v2
- $(Device/cpe510-520-v1)
- DEVICE_TITLE := TP-LINK CPE510 v2
- BOARDNAME := CPE510V2
- TPLINK_BOARD_ID := CPE510V2
-endef
-TARGET_DEVICES += cpe510-v2
-
-define Device/cpe210-220-v1
- $(Device/cpe510-520-v1)
- DEVICE_TITLE := TP-LINK CPE210/220 v1
- BOARDNAME := CPE210
- TPLINK_BOARD_ID := CPE210
-endef
-TARGET_DEVICES += cpe210-220-v1
-
-define Device/cpe210-v2
- $(Device/tplink-safeloader)
- DEVICE_TITLE := TP-LINK CPE210 v2
- BOARDNAME := CPE210V2
- TPLINK_BOARD_ID := CPE210V2
- TPLINK_HWID := 0x0
- TPLINK_HWREV := 0
- MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,7680k(firmware),192k(config)ro,64k(ART)ro
- IMAGE_SIZE := 7680k
- KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header
- DEVICE_PACKAGES := rssileds
-endef
-TARGET_DEVICES += cpe210-v2
-
-define Device/cpe210-v3
- $(Device/tplink-safeloader)
- DEVICE_TITLE := TP-LINK CPE210 v3
- BOARDNAME := CPE210V3
- TPLINK_BOARD_ID := CPE210V3
- TPLINK_HWID := 0x0
- TPLINK_HWREV := 0
- MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,7680k(firmware),192k(config)ro,64k(ART)ro
- IMAGE_SIZE := 7680k
- KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header
- DEVICE_PACKAGES := rssileds
-endef
-TARGET_DEVICES += cpe210-v3
-
-define Device/wbs210-v1
- $(Device/cpe510-520-v1)
- DEVICE_TITLE := TP-LINK WBS210 v1
- BOARDNAME := WBS210
- TPLINK_BOARD_ID := WBS210
-endef
-TARGET_DEVICES += wbs210-v1
-
-define Device/wbs510-v1
- $(Device/cpe510-520-v1)
- DEVICE_TITLE := TP-LINK WBS510 v1
- BOARDNAME := WBS510
- TPLINK_BOARD_ID := WBS510
-endef
-TARGET_DEVICES += wbs510-v1
-
-define Device/eap120-v1
- DEVICE_TITLE := TP-LINK EAP120 v1
- MTDPARTS := spi0.0:128k(u-boot)ro,64k(partition-table)ro,64k(product-info)ro,1536k(kernel),14336k(rootfs),192k(config)ro,64k(ART)ro,15872k@0x40000(firmware)
- IMAGE_SIZE := 15872k
- BOARDNAME := EAP120
- TPLINK_BOARD_ID := EAP120
- DEVICE_PROFILE := EAP120
- LOADER_TYPE := elf
- KERNEL := kernel-bin | patch-cmdline | lzma | loader-kernel
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
- IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
-endef
-TARGET_DEVICES += eap120-v1
-
-define Device/re355-v1
- $(Device/tplink-safeloader)
- DEVICE_TITLE := TP-LINK RE355 v1
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
- MTDPARTS := spi0.0:128k(u-boot)ro,6016k(firmware),64k(partition-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro
- IMAGE_SIZE := 7936k
- BOARDNAME := RE355
- TPLINK_BOARD_ID := RE355
- DEVICE_PROFILE := RE355
- TPLINK_HWID := 0x0
- TPLINK_HWREV := 0
- KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header
-endef
-TARGET_DEVICES += re355-v1
-
-define Device/re450-v1
- $(Device/tplink-safeloader)
- DEVICE_TITLE := TP-LINK RE450 v1
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
- MTDPARTS := spi0.0:128k(u-boot)ro,6016k(firmware),64k(partition-table)ro,64k(product-info)ro,1856k(config)ro,64k(art)ro
- IMAGE_SIZE := 7936k
- BOARDNAME := RE450
- TPLINK_BOARD_ID := RE450
- DEVICE_PROFILE := RE450
- TPLINK_HWID := 0x0
- TPLINK_HWREV := 0
- KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header
-endef
-TARGET_DEVICES += re450-v1
-
-define Device/tl-mr6400-v1
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK TL-MR6400 v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-net kmod-usb-net-rndis kmod-usb-serial kmod-usb-serial-option adb-enablemodem
- BOARDNAME := TL-MR6400
- DEVICE_PROFILE := TLMR6400
- TPLINK_HWID := 0x64000001
-endef
-TARGET_DEVICES += tl-mr6400-v1
-
-define Device/tl-wdr3500-v1
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK TL-WDR3500 v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-WDR3500
- DEVICE_PROFILE := TLWDR4300
- TPLINK_HWID := 0x35000001
-endef
-TARGET_DEVICES += tl-wdr3500-v1
-
-define Device/tl-wdr3600-v1
- $(Device/tl-wdr3500-v1)
- DEVICE_TITLE := TP-LINK TL-WDR3600 v1
- BOARDNAME := TL-WDR4300
- TPLINK_HWID := 0x36000001
- IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C US
-endef
-TARGET_DEVICES += tl-wdr3600-v1
-
-define Device/tl-wdr4300-v1
- $(Device/tl-wdr3600-v1)
- DEVICE_TITLE := TP-LINK TL-WDR4300 v1
- TPLINK_HWID := 0x43000001
-endef
-TARGET_DEVICES += tl-wdr4300-v1
-
-define Device/tl-wdr4300-v1-il
- $(Device/tl-wdr3500-v1)
- DEVICE_TITLE := TP-LINK TL-WDR4300 v1 (IL)
- BOARDNAME := TL-WDR4300
- TPLINK_HWID := 0x43008001
-endef
-TARGET_DEVICES += tl-wdr4300-v1-il
-
-define Device/tl-wdr4310-v1
- $(Device/tl-wdr4300-v1-il)
- DEVICE_TITLE := TP-LINK TL-WDR4310 v1
- TPLINK_HWID := 0x43100001
-endef
-TARGET_DEVICES += tl-wdr4310-v1
-
-define Device/tl-wdr4900-v2
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK TL-WDR4900 v2
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-WDR4900-v2
- DEVICE_PROFILE := TLWDR4900V2
- TPLINK_HWID := 0x49000002
-endef
-TARGET_DEVICES += tl-wdr4900-v2
-
-define Device/tl-wdr6500-v2
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK TL-WDR6500 v2
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
- KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma | tplink-v1-header
- BOARDNAME := TL-WDR6500-v2
- DEVICE_PROFILE := TLWDR6500V2
- TPLINK_HWID := 0x65000002
- TPLINK_HEADER_VERSION := 2
-endef
-TARGET_DEVICES += tl-wdr6500-v2
-
-define Device/mw4530r-v1
- $(Device/tl-wdr4300-v1)
- DEVICE_TITLE := Mercury MW4530R v1
- TPLINK_HWID := 0x45300001
-endef
-TARGET_DEVICES += mw4530r-v1
-
-define Device/tl-wpa8630-v1
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK TL-WPA8630 v1
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := TL-WPA8630
- DEVICE_PROFILE := TL-WPA8630
- TPLINK_HWID := 0x86300001
-endef
-TARGET_DEVICES += tl-wpa8630-v1
-
-define Device/tl-wr1043n-v5
- $(Device/archer-cxx)
- DEVICE_TITLE := TP-LINK TL-WR1043N v5
- BOARDNAME := TL-WR1043N-v5
- SUPPORTED_DEVICES := tl-wr1043n-v5
- DEVICE_PROFILE := TLWR1043
- MTDPARTS := spi0.0:128k(factory-uboot)ro,128k(u-boot)ro,15104k(firmware),128k(product-info)ro,640k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(art)ro
- IMAGE_SIZE := 15104k
- TPLINK_BOARD_ID := TLWR1043NV5
-endef
-TARGET_DEVICES += tl-wr1043n-v5
-
-define Device/tl-wr1043nd-v1
- $(Device/tplink-8m)
- DEVICE_TITLE := TP-LINK TL-WR1043N/ND v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-WR1043ND
- DEVICE_PROFILE := TLWR1043
- TPLINK_HWID := 0x10430001
-endef
-TARGET_DEVICES += tl-wr1043nd-v1
-
-define Device/tl-wr1043nd-v2
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK TL-WR1043N/ND v2
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-WR1043ND-v2
- DEVICE_PROFILE := TLWR1043
- TPLINK_HWID := 0x10430002
-endef
-TARGET_DEVICES += tl-wr1043nd-v2
-
-define Device/tl-wr1043nd-v3
- $(Device/tl-wr1043nd-v2)
- DEVICE_TITLE := TP-LINK TL-WR1043N/ND v3
- TPLINK_HWID := 0x10430003
-endef
-TARGET_DEVICES += tl-wr1043nd-v3
-
-define Device/tl-wr1043nd-v4
- $(Device/tplink-safeloader)
- DEVICE_TITLE := TP-LINK TL-WR1043N/ND v4
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-WR1043ND-v4
- DEVICE_PROFILE := TLWR1043
- TPLINK_HWID := 0x10430004
- MTDPARTS := spi0.0:128k(u-boot)ro,15552k(firmware),128k(product-info)ro,320k(config)ro,64k(partition-table)ro,128k(logs)ro,64k(ART)ro
- IMAGE_SIZE := 15552k
- TPLINK_BOARD_ID := TLWR1043NDV4
- KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header
-endef
-TARGET_DEVICES += tl-wr1043nd-v4
-
-define Device/tl-wr2543-v1
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK TL-WR2543N/ND v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-WR2543N
- DEVICE_PROFILE := TLWR2543
- TPLINK_HWID := 0x25430001
- IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -v 3.13.99
- IMAGE/factory.bin := append-rootfs | mktplinkfw factory -v 3.13.99
-endef
-TARGET_DEVICES += tl-wr2543-v1
-
-define Device/tl-wr710n-v1
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK TL-WR710N v1
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := TL-WR710N
- DEVICE_PROFILE := TLWR710
- TPLINK_HWID := 0x07100001
- CONSOLE := ttyATH0,115200
- IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C US
-endef
-TARGET_DEVICES += tl-wr710n-v1
-
-define Device/tl-wr710n-v2.1
- $(Device/tl-wr710n-v1)
- DEVICE_TITLE := TP-LINK TL-WR710N v2.1
- TPLINK_HWID := 0x07100002
- TPLINK_HWREV := 0x00000002
-endef
-TARGET_DEVICES += tl-wr710n-v2.1
-
-define Device/tl-wr810n-v1
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK TL-WR810N v1
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := TL-WR810N
- DEVICE_PROFILE := TLWR810
- TPLINK_HWID := 0x08100001
-endef
-TARGET_DEVICES += tl-wr810n-v1
-
-define Device/tl-wr810n-v2
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK TL-WR810N v2
- BOARDNAME := TL-WR810N-v2
- DEVICE_PROFILE := TLWR810
- TPLINK_HWID := 0x08100002
-endef
-TARGET_DEVICES += tl-wr810n-v2
-
-define Device/tl-wr842n-v1
- $(Device/tplink-8m)
- DEVICE_TITLE := TP-LINK TL-WR842N/ND v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-MR3420
- DEVICE_PROFILE := TLWR842
- TPLINK_HWID := 0x08420001
-endef
-TARGET_DEVICES += tl-wr842n-v1
-
-define Device/tl-wr842n-v2
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := TP-LINK TL-WR842N/ND v2
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-WR842N-v2
- DEVICE_PROFILE := TLWR842
- TPLINK_HWID := 0x8420002
-endef
-TARGET_DEVICES += tl-wr842n-v2
-
-define Device/tl-wr842n-v3
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := TP-LINK TL-WR842N/ND v3
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-WR842N-v3
- DEVICE_PROFILE := TLWR842
- TPLINK_HWID := 0x08420003
-endef
-TARGET_DEVICES += tl-wr842n-v3
-
-define Device/tl-wr902ac-v1
- $(Device/tplink-safeloader)
- DEVICE_TITLE := TP-LINK TL-WR902AC v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport \
- kmod-ath10k-ct ath10k-firmware-qca9887-ct -swconfig -uboot-envtools
- BOARDNAME := TL-WR902AC-V1
- DEVICE_PROFILE := TLWR902
- TPLINK_BOARD_ID := TL-WR902AC-V1
- TPLINK_HWID := 0x0
- TPLINK_HWREV := 0
- SUPPORTED_DEVICES := tl-wr902ac-v1
- IMAGE_SIZE := 7360k
- MTDPARTS := spi0.0:128k(u-boot)ro,7360k(firmware),640k(tplink)ro,64k(art)ro
- KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header -O
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | tplink-v1-header
-endef
-TARGET_DEVICES += tl-wr902ac-v1
-
-define Device/tl-wr942n-v1
- $(Device/archer-cxx)
- DEVICE_TITLE := TP-LINK TL-WR942N v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-WR942N-V1
- TPLINK_BOARD_ID := TLWR942NV1
- DEVICE_PROFILE := TLWR942
- IMAGE_SIZE := 14464k
- MTDPARTS := spi0.0:128k(u-boot)ro,14464k(firmware),64k(product-info)ro,64k(partition-table)ro,256k(oem-config)ro,1344k(oem-vars)ro,64k(ART)ro
- SUPPORTED_DEVICES := tl-wr942n-v1
-endef
-TARGET_DEVICES += tl-wr942n-v1
diff --git a/target/linux/ar71xx/image/generic-ubnt.mk b/target/linux/ar71xx/image/generic-ubnt.mk
deleted file mode 100644
index 539f0d82b3..0000000000
--- a/target/linux/ar71xx/image/generic-ubnt.mk
+++ /dev/null
@@ -1,319 +0,0 @@
-DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION
-
-# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like
-# VERSION_DIST being on the place of major(?) version number, so we need to
-# use some number.
-UBNT_REVISION := $(VERSION_DIST)-$(REVISION)
-
-# mkubntimage is using the kernel image direct
-# routerboard creates partitions out of the ubnt header
-define Build/mkubntimage
- -$(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -k $(IMAGE_KERNEL) \
- -r $@ \
- -o $@
-endef
-
-# all UBNT XM device expect the kernel image to have 1024k while flash, when
-# booting the image, the size doesn't matter.
-define Build/mkubntimage-split
- -[ -f $@ ] && ( \
- dd if=$@ of=$@.old1 bs=1024k count=1; \
- dd if=$@ of=$@.old2 bs=1024k skip=1; \
- $(STAGING_DIR_HOST)/bin/mkfwimage \
- -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \
- -k $@.old1 \
- -r $@.old2 \
- -o $@; \
- rm $@.old1 $@.old2 )
-endef
-
-define Build/mkubntimage2
- -$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
- -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
- -p jffs2:0x50000:0xf60000:0:0:$@ \
- -o $@.new
- @mv $@.new $@
-endef
-
-
-# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
-# UBNT_TYPE e.g. one of (BZ, XM, XW)
-# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
-# UBNT_VERSION e.g. one of (6.0.0, 8.5.0)
-define Device/ubnt
- DEVICE_PACKAGES := kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7552k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
- UBNT_BOARD := XM
- UBNT_VERSION := 6.0.0
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage-split
-endef
-
-define Device/ubnt-xm
- $(Device/ubnt)
- DEVICE_PACKAGES += kmod-usb-ohci
- UBNT_TYPE := XM
- UBNT_CHIP := ar7240
- KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma | uImage lzma
-endef
-
-define Device/ubnt-xw
- $(Device/ubnt)
- UBNT_TYPE := XW
- UBNT_CHIP := ar934x
- UBNT_VERSION := 6.0.4
- UBNT_REVISION := 42.$(UBNT_REVISION)
-endef
-
-define Device/ubnt-bz
- $(Device/ubnt)
- UBNT_TYPE := BZ
- UBNT_CHIP := ar7240
-endef
-
-define Device/rw2458n
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti RW2458N
- BOARDNAME := RW2458N
-endef
-TARGET_DEVICES += rw2458n
-
-define Device/ubnt-airrouter
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti AirRouter
- BOARDNAME := UBNT-AR
-endef
-TARGET_DEVICES += ubnt-airrouter
-
-define Device/ubnt-bullet-m
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Bullet-M
- DEVICE_PACKAGES += rssileds
- BOARDNAME := UBNT-BM
-endef
-TARGET_DEVICES += ubnt-bullet-m
-
-define Device/ubnt-rocket-m
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Rocket-M
- DEVICE_PACKAGES += rssileds
- BOARDNAME := UBNT-RM
-endef
-TARGET_DEVICES += ubnt-rocket-m
-
-define Device/ubnt-nano-m
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Nano-M
- DEVICE_PACKAGES += rssileds
- BOARDNAME := UBNT-NM
-endef
-TARGET_DEVICES += ubnt-nano-m
-
-define Device/ubnt-unifi
- $(Device/ubnt-bz)
- DEVICE_TITLE := Ubiquiti UniFi
- BOARDNAME := UBNT-UF
- DEVICE_PROFILE += UBNTUNIFI
-endef
-TARGET_DEVICES += ubnt-unifi
-
-define Device/ubnt-unifiac
- DEVICE_PACKAGES := kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 7744k
- MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs),256k(cfg)ro,64k(EEPROM)ro
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/ubnt-unifiac-lite
- $(Device/ubnt-unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Lite
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
- DEVICE_PROFILE += UBNTUNIFIACLITE
- BOARDNAME := UBNT-UF-AC-LITE
-endef
-TARGET_DEVICES += ubnt-unifiac-lite
-
-define Device/ubnt-unifiac-lr
- $(Device/ubnt-unifiac-lite)
- DEVICE_TITLE := Ubiquiti UniFi AC-LR
-endef
-TARGET_DEVICES += ubnt-unifiac-lr
-
-define Device/ubnt-unifiac-mesh
- $(Device/ubnt-unifiac-lite)
- DEVICE_TITLE := Ubiquiti UniFi AC-Mesh
-endef
-TARGET_DEVICES += ubnt-unifiac-mesh
-
-define Device/ubnt-unifiac-pro
- $(Device/ubnt-unifiac)
- DEVICE_TITLE := Ubiquiti UniFi AC-Pro
- DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
- DEVICE_PROFILE += UBNTUNIFIACPRO
- BOARDNAME := UBNT-UF-AC-PRO
-endef
-TARGET_DEVICES += ubnt-unifiac-pro
-
-define Device/ubnt-unifiac-mesh-pro
- $(Device/ubnt-unifiac-pro)
- DEVICE_TITLE := Ubiquiti UniFi AC-Mesh-Pro
-endef
-TARGET_DEVICES += ubnt-unifiac-mesh-pro
-
-define Device/ubnt-unifi-outdoor
- $(Device/ubnt-bz)
- DEVICE_TITLE := Ubiquiti UniFi Outdoor
- BOARDNAME := UBNT-U20
- DEVICE_PROFILE += UBNTUNIFIOUTDOOR
-endef
-TARGET_DEVICES += ubnt-unifi-outdoor
-
-define Device/ubnt-nano-m-xw
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Nano M XW
- DEVICE_PACKAGES += rssileds
- BOARDNAME := UBNT-NM-XW
-endef
-TARGET_DEVICES += ubnt-nano-m-xw
-
-define Device/ubnt-lbe-m5
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Litebeam M5
- BOARDNAME := UBNT-LBE-M5
-endef
-TARGET_DEVICES += ubnt-lbe-m5
-
-define Device/ubnt-loco-m-xw
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Loco XW
- DEVICE_PACKAGES += rssileds
- BOARDNAME := UBNT-LOCO-XW
-endef
-TARGET_DEVICES += ubnt-loco-m-xw
-
-define Device/ubnt-bullet-m-xw
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Bullet-M XW
- DEVICE_PACKAGES += rssileds
- BOARDNAME := UBNT-BM-XW
-endef
-TARGET_DEVICES += ubnt-bullet-m-xw
-
-define Device/ubnt-rocket-m-xw
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Rocket M XW
- DEVICE_PACKAGES += rssileds
- BOARDNAME := UBNT-RM-XW
-endef
-TARGET_DEVICES += ubnt-rocket-m-xw
-
-define Device/ubnt-rocket-m-ti
- $(Device/ubnt-xw)
- DEVICE_TITLE := Ubiquiti Rocket M TI
- DEVICE_PACKAGES += rssileds
- BOARDNAME := UBNT-RM-TI
- UBNT_TYPE := TI
-endef
-TARGET_DEVICES += ubnt-rocket-m-ti
-
-define Device/ubnt-air-gateway
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Air Gateway
- BOARDNAME := UBNT-AGW
- UBNT_TYPE := AirGW
- UBNT_CHIP := ar933x
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += ubnt-air-gateway
-
-define Device/ubnt-air-gateway-pro
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti Air Gateway Pro
- BOARDNAME := UBNT-AGWP
- UBNT_TYPE := AirGWP
- UBNT_CHIP := ar934x
-endef
-TARGET_DEVICES += ubnt-air-gateway-pro
-
-define Device/ubdev01
- $(Device/ubnt-xm)
- DEVICE_TITLE := Ubiquiti ubDEV01
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
- BOARDNAME := UBNT-UF
- UBNT_BOARD := UBDEV01
-endef
-TARGET_DEVICES += ubdev01
-
-define Device/ubnt-routerstation
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
- DEVICE_PROFILE := UBNT
- IMAGE_SIZE := 16128k
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | mkubntimage
- IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
- KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
-endef
-
-define Device/ubnt-rs
- $(Device/ubnt-routerstation)
- DEVICE_TITLE := Ubiquiti RouterStation
- BOARDNAME := UBNT-RS
- DEVICE_PROFILE += UBNTRS
- UBNT_BOARD := RS
- UBNT_TYPE := RSx
- UBNT_CHIP := ar7100
-endef
-TARGET_DEVICES += ubnt-rs
-
-define Device/ubnt-rspro
- $(Device/ubnt-routerstation)
- DEVICE_TITLE := Ubiquiti RouterStation Pro
- BOARDNAME := UBNT-RSPRO
- DEVICE_PROFILE += UBNTRSPRO
- UBNT_BOARD := RSPRO
- UBNT_TYPE := RSPRO
- UBNT_CHIP := ar7100pro
-endef
-TARGET_DEVICES += ubnt-rspro
-
-define Device/ubnt-ls-sr71
- $(Device/ubnt-routerstation)
- DEVICE_TITLE := Ubiquiti LS-SR71
- BOARDNAME := UBNT-LS-SR71
- UBNT_BOARD := LS-SR71
- UBNT_TYPE := LS-SR71
- UBNT_CHIP := ar7100
-endef
-TARGET_DEVICES += ubnt-ls-sr71
-
-define Device/ubnt-uap-pro
- DEVICE_TITLE := Ubiquiti UAP Pro
- KERNEL_SIZE := 2048k
- IMAGE_SIZE := 15744k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2048k(kernel),13696k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
- UBNT_TYPE := BZ
- UBNT_CHIP := ar934x
- BOARDNAME := UAP-PRO
- DEVICE_PROFILE := UBNT UAPPRO
- KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
-endef
-TARGET_DEVICES += ubnt-uap-pro
-
-define Device/ubnt-unifi-outdoor-plus
- $(Device/ubnt-uap-pro)
- DEVICE_TITLE := Ubiquiti UniFi Outdoor Plus
- UBNT_CHIP := ar7240
- BOARDNAME := UBNT-UOP
- DEVICE_PROFILE := UBNT
-endef
-TARGET_DEVICES += ubnt-unifi-outdoor-plus
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
deleted file mode 100644
index 27e2a5fc22..0000000000
--- a/target/linux/ar71xx/image/generic.mk
+++ /dev/null
@@ -1,1352 +0,0 @@
-DEVICE_VARS += DAP_SIGNATURE NETGEAR_BOARD_ID NETGEAR_HW_ID NETGEAR_KERNEL_MAGIC ROOTFS_SIZE
-DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
-
-define Build/alfa-network-rootfs-header
- mkimage \
- -A mips -O linux -T filesystem -C lzma -a 0 -e 0 \
- -n 'RootfsImage' -d $@ $@.new
- @mv $@.new $@
-endef
-
-define Build/append-md5sum-bin
- $(STAGING_DIR_HOST)/bin/mkhash md5 $@ | sed 's/../\\\\x&/g' |\
- xargs echo -ne >> $@
-endef
-
-define Build/mkwrggimg
- $(STAGING_DIR_HOST)/bin/mkwrggimg -b \
- -i $@ -o $@.imghdr -d /dev/mtdblock/1 \
- -m $(BOARDNAME) -s $(DAP_SIGNATURE) \
- -v $(VERSION_DIST) -B $(REVISION)
- mv $@.imghdr $@
-endef
-
-define Build/mkdapimg2
- $(STAGING_DIR_HOST)/bin/mkdapimg2 \
- -i $@ -o $@.new \
- -s $(DAP_SIGNATURE) \
- -v $(VERSION_DIST)-$(firstword $(subst +, ,$(firstword $(subst -, ,$(REVISION))))) \
- -r Default \
- $(if $(1),-k $(1))
- mv $@.new $@
-endef
-
-define Build/netgear-squashfs
- rm -rf $@.fs $@.squashfs
- mkdir -p $@.fs/image
- cp $@ $@.fs/image/uImage
- $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
- $@.fs $@.squashfs \
- -noappend -root-owned -be -b 65536 \
- $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
-
- dd if=/dev/zero bs=1k count=1 >> $@.squashfs
- mkimage \
- -A mips -O linux -T filesystem -C none \
- -M $(NETGEAR_KERNEL_MAGIC) \
- -a 0xbf070000 -e 0xbf070000 \
- -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
- -d $@.squashfs $@
- rm -rf $@.squashfs $@.fs
-endef
-
-define Build/netgear-uImage
- $(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC))
-endef
-
-define Build/relocate-kernel
- rm -rf $@.relocate
- $(CP) ../../generic/image/relocate $@.relocate
- $(MAKE) -j1 -C $@.relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS)
- ( \
- dd if=$@.relocate/loader.bin bs=32 conv=sync && \
- perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
- cat "$@" \
- ) > "$@.new"
- mv "$@.new" "$@"
- rm -rf $@.relocate
-endef
-
-define Build/teltonika-fw-fake-checksum
- # Teltonika U-Boot web based firmware upgrade/recovery routine compares
- # 16 bytes from md5sum1[16] field in TP-Link v1 header (offset: 76 bytes
- # from begin of the firmware file) with 16 bytes stored just before
- # 0xdeadc0de marker. Values are only compared, MD5 sum is not verified.
- let \
- offs="$$(stat -c%s $@) - 20"; \
- dd if=$@ bs=1 count=16 skip=76 |\
- dd of=$@ bs=1 count=16 seek=$$offs conv=notrunc
-endef
-
-define Build/uImageHiWiFi
- # Field ih_name needs to start with "tw150v1"
- mkimage -A $(LINUX_KARCH) \
- -O linux -T kernel \
- -C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
- -n 'tw150v1 $(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)' -d $@ $@.new
- @mv $@.new $@
-endef
-
-define Build/wrgg-pad-rootfs
- $(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
-endef
-
-
-define Device/ap121f
- DEVICE_TITLE := ALFA Network AP121F
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage -swconfig
- BOARDNAME := AP121F
- IMAGE_SIZE := 16064k
- CONSOLE := ttyATH0,115200
- MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
- SUPPORTED_DEVICES := ap121f
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += ap121f
-
-define Device/ap531b0
- DEVICE_TITLE := Rockeetech AP531B0
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := AP531B0
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += ap531b0
-
-define Device/ap90q
- DEVICE_TITLE := YunCore AP80Q/AP90Q
- BOARDNAME := AP90Q
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += ap90q
-
-define Device/ap91-5g
- DEVICE_TITLE := ALFA Network AP91-5G
- DEVICE_PACKAGES := rssileds -swconfig
- BOARDNAME := AP91-5G
- IMAGE_SIZE := 7744k
- KERNEL_SIZE := 1600k
- ROOTFS_SIZE := 6144k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),6144k(rootfs),1600k(kernel),64k(config)ro,64k(art)ro,7744k@0x50000(firmware)
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs |\
- alfa-network-rootfs-header | append-kernel | check-size $$$$(IMAGE_SIZE)
- IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs |\
- pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/arduino-yun
- DEVICE_TITLE := Arduino Yun
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := Yun
- IMAGE_SIZE := 15936k
- CONSOLE := ttyATH0,250000
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15936k(firmware),64k(nvram),64k(art)ro
-endef
-TARGET_DEVICES += arduino-yun
-
-define Device/bsb
- DEVICE_TITLE := Smart Electronics Black Swift board
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := BSB
- IMAGE_SIZE := 16000k
- CONSOLE := ttyATH0,115200
- MTDPARTS := spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += bsb
-
-define Device/carambola2
- DEVICE_TITLE := 8devices Carambola2
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := CARAMBOLA2
- IMAGE_SIZE := 16000k
- CONSOLE := ttyATH0,115200
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += carambola2
-
-define Device/cf-e316n-v2
- DEVICE_TITLE := COMFAST CF-E316N v2
- DEVICE_PACKAGES := -swconfig -uboot-envtools
- BOARDNAME := CF-E316N-V2
- IMAGE_SIZE := 16192k
- MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
-endef
-TARGET_DEVICES += cf-e316n-v2
-
-define Device/cf-e320n-v2
- $(Device/cf-e316n-v2)
- DEVICE_TITLE := COMFAST CF-E320N v2
- DEVICE_PACKAGES += kmod-usb2
- BOARDNAME := CF-E320N-V2
-endef
-TARGET_DEVICES += cf-e320n-v2
-
-define Device/cf-e355ac-v1
- DEVICE_TITLE := COMFAST CF-E355AC v1
- DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct \
- -swconfig -uboot-envtools
- BOARDNAME := CF-E355AC-V1
- IMAGE_SIZE := 16192k
- MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
-endef
-TARGET_DEVICES += cf-e355ac-v1
-
-define Device/cf-e355ac-v2
- $(Device/cf-e355ac-v1)
- DEVICE_TITLE := COMFAST CF-E355AC v2
- DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \
- -swconfig -uboot-envtools
- BOARDNAME := CF-E355AC-V2
-endef
-TARGET_DEVICES += cf-e355ac-v2
-
-define Device/cf-e375ac
- DEVICE_TITLE := COMFAST CF-E375AC
- DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9888-ct \
- -uboot-envtools
- BOARDNAME := CF-E375AC
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
-endef
-TARGET_DEVICES += cf-e375ac
-
-define Device/cf-e380ac-v1
- DEVICE_TITLE := COMFAST CF-E380AC v1
- DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct \
- -swconfig -uboot-envtools
- BOARDNAME := CF-E380AC-V1
- IMAGE_SIZE := 16128k
- MTDPARTS := spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(art-backup)ro
-endef
-TARGET_DEVICES += cf-e380ac-v1
-
-define Device/cf-e380ac-v2
- $(Device/cf-e380ac-v1)
- DEVICE_TITLE := COMFAST CF-E380AC v2
- BOARDNAME := CF-E380AC-V2
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
-endef
-TARGET_DEVICES += cf-e380ac-v2
-
-define Device/cf-e385ac
- DEVICE_TITLE := COMFAST CF-E385AC
- DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9984-ct \
- -uboot-envtools
- BOARDNAME := CF-E385AC
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
-endef
-TARGET_DEVICES += cf-e385ac
-
-define Device/cf-e520n
- DEVICE_TITLE := COMFAST CF-E520N
- DEVICE_PACKAGES := kmod-usb2 -swconfig -uboot-envtools
- BOARDNAME := CF-E520N
- IMAGE_SIZE := 8000k
- MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro
-endef
-TARGET_DEVICES += cf-e520n
-
-define Device/cf-e530n
- $(Device/cf-e520n)
- DEVICE_TITLE := COMFAST CF-E530N
- BOARDNAME := CF-E530N
-endef
-TARGET_DEVICES += cf-e530n
-
-define Device/cpe505n
- DEVICE_TITLE := P&W CPE505N
- BOARDNAME := CPE505N
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += cpe505n
-
-define Device/cpe830
- $(Device/ap90q)
- DEVICE_TITLE := YunCore CPE830
- DEVICE_PACKAGES := rssileds
- BOARDNAME := CPE830
-endef
-TARGET_DEVICES += cpe830
-
-define Device/cpe870
- DEVICE_TITLE := YunCore CPE870
- DEVICE_PACKAGES := rssileds
- BOARDNAME := CPE870
- IMAGE_SIZE := 7936k
- MTDPARTS := spi0.0:64k(u-boot)ro,64k(u-boot-env),7936k(firmware),64k(config)ro,64k(art)ro
-endef
-TARGET_DEVICES += cpe870
-
-define Device/dragino2
- BOARDNAME := DRAGINO2
- CONSOLE := ttyATH0,115200
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- DEVICE_TITLE := Dragino 2 (MS14)
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
-endef
-TARGET_DEVICES += dragino2
-
-define Device/e1700ac-v2-16M
- DEVICE_TITLE := Qxwlan E1700AC v2 (16MB flash)
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct \
- kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := E1700AC-V2
- SUPPORTED_DEVICES := e1700ac-v2
- IMAGE_SIZE := 15936k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += e1700ac-v2-16M
-
-define Device/e1700ac-v2-8M
- $(Device/e1700ac-v2-16M)
- DEVICE_TITLE := Qxwlan E1700AC v2 (8MB flash)
- IMAGE_SIZE := 7744k
-endef
-TARGET_DEVICES += e1700ac-v2-8M
-
-define Device/e558-v2-16M
- DEVICE_TITLE := Qxwlan E558 v2 (16MB flash)
- DEVICE_PACKAGES := kmod-usb2 -swconfig
- BOARDNAME := E558-V2
- SUPPORTED_DEVICES := e558-v2
- IMAGE_SIZE := 15936k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += e558-v2-16M
-
-define Device/e558-v2-8M
- $(Device/e558-v2-16M)
- DEVICE_TITLE := Qxwlan E558 v2 (8MB flash)
- IMAGE_SIZE := 7744k
-endef
-TARGET_DEVICES += e558-v2-8M
-
-define Device/e600g-v2-16M
- DEVICE_TITLE := Qxwlan E600G v2 (16MB flash)
- DEVICE_PACKAGES := kmod-usb2 -swconfig
- BOARDNAME := E600G-V2
- SUPPORTED_DEVICES := e600g-v2
- IMAGE_SIZE := 15936k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += e600g-v2-16M
-
-define Device/e600g-v2-8M
- $(Device/e600g-v2-16M)
- DEVICE_TITLE := Qxwlan E600G v2 (8MB flash)
- IMAGE_SIZE := 7744k
-endef
-TARGET_DEVICES += e600g-v2-8M
-
-define Device/e600gac-v2-16M
- DEVICE_TITLE := Qxwlan E600GAC v2 (16MB flash)
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct \
- kmod-usb2 -swconfig
- BOARDNAME := E600GAC-V2
- SUPPORTED_DEVICES := e600gac-v2
- IMAGE_SIZE := 15936k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art)ro,-(firmware)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += e600gac-v2-16M
-
-define Device/e600gac-v2-8M
- $(Device/e600gac-v2-16M)
- DEVICE_TITLE := Qxwlan E600GAC v2 (8MB flash)
- IMAGE_SIZE := 7744k
-endef
-TARGET_DEVICES += e600gac-v2-8M
-
-define Device/e750a-v4-16M
- DEVICE_TITLE := Qxwlan E750A v4 (16MB flash)
- DEVICE_PACKAGES := kmod-usb2 -swconfig
- BOARDNAME := E750A-V4
- SUPPORTED_DEVICES := e750a-v4
- IMAGE_SIZE := 15936k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += e750a-v4-16M
-
-define Device/e750a-v4-8M
- $(Device/e750a-v4-16M)
- DEVICE_TITLE := Qxwlan E750A v4 (8MB flash)
- IMAGE_SIZE := 7744k
-endef
-TARGET_DEVICES += e750a-v4-8M
-
-define Device/e750g-v8-16M
- DEVICE_TITLE := Qxwlan E750G v8 (16MB flash)
- DEVICE_PACKAGES := kmod-usb2 -swconfig
- BOARDNAME := E750G-V8
- SUPPORTED_DEVICES := e750g-v8
- IMAGE_SIZE := 15936k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(pri-data)ro,64k(art),-(firmware)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += e750g-v8-16M
-
-define Device/e750g-v8-8M
- $(Device/e750g-v8-16M)
- DEVICE_TITLE := Qxwlan E750G v8 (8MB flash)
- IMAGE_SIZE := 7744k
-endef
-TARGET_DEVICES += e750g-v8-8M
-
-define Device/ew-balin
- DEVICE_TITLE := Embedded Wireless Balin Platform
- DEVICE_PACKAGES := kmod-usb-chipidea
- BOARDNAME := EW-BALIN
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += ew-balin
-
-define Device/ew-dorin
- $(Device/ew-balin)
- DEVICE_TITLE := Embedded Wireless Dorin Platform
- BOARDNAME := EW-DORIN
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += ew-dorin
-
-define Device/ew-dorin-router
- $(Device/ew-dorin)
- DEVICE_TITLE := Embedded Wireless Dorin Router Platform
- BOARDNAME := EW-DORIN-ROUTER
-endef
-TARGET_DEVICES += ew-dorin-router
-
-define Device/rme-eg200
- DEVICE_TITLE := eTactica EG-200
- DEVICE_PACKAGES := kmod-usb2 kmod-ledtrig-oneshot \
- kmod-usb-serial kmod-usb-serial-ftdi \
- kmod-usb-storage \
- kmod-fs-ext4
- BOARDNAME := RME-EG200
- IMAGE_SIZE := 16000k
- CONSOLE := ttyATH0,115200
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += rme-eg200
-
-define Device/weio
- DEVICE_TITLE := WeIO
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := WEIO
- IMAGE_SIZE := 16000k
- CONSOLE := ttyATH0,115200
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += weio
-
-define Device/gl-ar150
- DEVICE_TITLE := GL.iNet GL-AR150
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := GL-AR150
- IMAGE_SIZE := 16000k
- CONSOLE := ttyATH0,115200
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += gl-ar150
-
-define Device/gl-ar300
- DEVICE_TITLE := GL.iNet GL-AR300
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := GL-AR300
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += gl-ar300
-
-define Device/gl-ar300m
- DEVICE_TITLE := GL.iNet GL-AR300M
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := GL-AR300M
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += gl-ar300m
-
-define Device/gl-ar750
- DEVICE_TITLE := GL.iNet GL-AR750
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct \
- kmod-usb2 kmod-usb-storage
- BOARDNAME := GL-AR750
- SUPPORTED_DEVICES := gl-ar750
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += gl-ar750
-
-define Device/gl-ar750s
- DEVICE_TITLE := GL.iNet GL-AR750S
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct \
- kmod-usb2 kmod-usb-storage
- BOARDNAME := GL-AR750S
- SUPPORTED_DEVICES := gl-ar750s
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += gl-ar750s
-
-define Device/gl-domino
- DEVICE_TITLE := GL.iNet Domino Pi
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := DOMINO
- IMAGE_SIZE := 16000k
- CONSOLE := ttyATH0,115200
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += gl-domino
-
-define Device/gl-mifi
- DEVICE_TITLE := GL.iNet GL-MiFi
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := GL-MIFI
- IMAGE_SIZE := 16000k
- CONSOLE := ttyATH0,115200
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += gl-mifi
-
-define Device/gl-usb150
- DEVICE_TITLE := GL.iNet GL-USB150
- DEVICE_PACKAGES := -swconfig
- BOARDNAME := GL-USB150
- IMAGE_SIZE := 16000k
- CONSOLE := ttyATH0,115200
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
- SUPPORTED_DEVICES := gl-usb150
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += gl-usb150
-
-define Device/lan-turtle
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := Hak5 LAN Turtle
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage \
- -kmod-ath9k -swconfig -uboot-envtools -wpad-basic
- BOARDNAME := LAN-TURTLE
- DEVICE_PROFILE := LANTURTLE
- TPLINK_HWID := 0x5348334c
- CONSOLE := ttyATH0,115200
- IMAGES := sysupgrade.bin
-endef
-TARGET_DEVICES += lan-turtle
-
-define Device/lima
- DEVICE_TITLE := 8devices Lima
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := LIMA
- IMAGE_SIZE := 15616k
- MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,256k(art)ro,-(firmware)
-endef
-TARGET_DEVICES += lima
-
-define Device/mr12
- DEVICE_TITLE := Meraki MR12
- DEVICE_PACKAGES := kmod-spi-gpio
- BOARDNAME := MR12
- ROOTFS_SIZE := 13440k
- IMAGE_SIZE := 15680k
- MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware)
- IMAGE/kernel.bin := append-kernel
- IMAGE/rootfs.bin := append-rootfs | pad-rootfs
- IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
- IMAGES := kernel.bin rootfs.bin sysupgrade.bin
-endef
-TARGET_DEVICES += mr12
-
-define Device/mr16
- $(Device/mr12)
- DEVICE_TITLE := Meraki MR16
- BOARDNAME := MR16
-endef
-TARGET_DEVICES += mr16
-
-define Device/dr342
- DEVICE_TITLE := Wallys DR342
- DEVICE_PACKAGES := kmod-usb2 -swconfig
- BOARDNAME := DR342
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += dr342
-
-define Device/dr344
- DEVICE_TITLE := Wallys DR344
- BOARDNAME := DR344
- KERNEL_SIZE := 1408k
- ROOTFS_SIZE := 6336k
- IMAGE_SIZE := 7744k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
- IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/dr531
- DEVICE_TITLE := Wallys DR531
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := DR531
- IMAGE_SIZE := 7808k
- MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,7808k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += dr531
-
-define Device/wndr3700
- DEVICE_TITLE := NETGEAR WNDR3700
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-wndr3700-usb
- BOARDNAME := WNDR3700
- NETGEAR_KERNEL_MAGIC := 0x33373030
- NETGEAR_BOARD_ID := WNDR3700
- IMAGE_SIZE := 7680k
- MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
- IMAGES := sysupgrade.bin factory.img factory-NA.img
- KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma
- IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
- IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += wndr3700
-
-define Device/wndr3700v2
- $(Device/wndr3700)
- DEVICE_TITLE := NETGEAR WNDR3700 v2
- NETGEAR_BOARD_ID := WNDR3700v2
- NETGEAR_KERNEL_MAGIC := 0x33373031
- NETGEAR_HW_ID := 29763654+16+64
- IMAGE_SIZE := 15872k
- MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
- IMAGES := sysupgrade.bin factory.img
-endef
-TARGET_DEVICES += wndr3700v2
-
-define Device/wndr3800
- $(Device/wndr3700v2)
- DEVICE_TITLE := NETGEAR WNDR3800
- NETGEAR_BOARD_ID := WNDR3800
- NETGEAR_HW_ID := 29763654+16+128
-endef
-TARGET_DEVICES += wndr3800
-
-define Device/wndr3800ch
- $(Device/wndr3800)
- DEVICE_TITLE := NETGEAR WNDR3800 (Ch)
- NETGEAR_BOARD_ID := WNDR3800CH
-endef
-TARGET_DEVICES += wndr3800ch
-
-define Device/wndrmac
- $(Device/wndr3700v2)
- DEVICE_TITLE := NETGEAR WNDRMAC
- NETGEAR_BOARD_ID := WNDRMAC
-endef
-TARGET_DEVICES += wndrmac
-
-define Device/wndrmacv2
- $(Device/wndr3800)
- DEVICE_TITLE := NETGEAR WNDRMAC v2
- NETGEAR_BOARD_ID := WNDRMACv2
-endef
-TARGET_DEVICES += wndrmacv2
-
-define Device/cap324
- DEVICE_TITLE := PowerCloud Systems CAP324
- BOARDNAME := CAP324
- DEVICE_PROFILE := CAP324
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += cap324
-
-define Device/cr3000
- DEVICE_TITLE := PowerCloud Systems CR3000
- BOARDNAME := CR3000
- DEVICE_PROFILE := CR3000
- IMAGE_SIZE := 7808k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += cr3000
-
-define Device/cr5000
- DEVICE_TITLE := PowerCloud Systems CR5000
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := CR5000
- DEVICE_PROFILE := CR5000
- IMAGE_SIZE := 7808k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += cr5000
-
-define Device/packet-squirrel
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := Hak5 Packet Squirrel
- DEVICE_PACKAGES := kmod-usb2 \
- -kmod-ath9k -swconfig -uboot-envtools -wpad-basic
- BOARDNAME := PACKET-SQUIRREL
- DEVICE_PROFILE := PACKETSQUIRREL
- TPLINK_HWID := 0x5351524c
- CONSOLE := ttyATH0,115200
- IMAGES := sysupgrade.bin
-endef
-TARGET_DEVICES += packet-squirrel
-
-define Device/pqi-air-pen
- DEVICE_TITLE := PQI Air Pen
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage
- BOARDNAME := PQI-AIR-PEN
- IMAGE_SIZE := 7744k
- CONSOLE := ttyATH0,115200
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(art)ro,64k(NVRAM)ro,7680k(firmware),64k(CONF)
-endef
-TARGET_DEVICES += pqi-air-pen
-
-define Device/antminer-s1
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := Antminer-S1
- DEVICE_PACKAGES := kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid
- BOARDNAME := ANTMINER-S1
- DEVICE_PROFILE := ANTMINERS1
- TPLINK_HWID := 0x04440101
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += antminer-s1
-
-define Device/antminer-s3
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := Antminer-S3
- DEVICE_PACKAGES := kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid
- BOARDNAME := ANTMINER-S3
- DEVICE_PROFILE := ANTMINERS3
- TPLINK_HWID := 0x04440301
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += antminer-s3
-
-define Device/antrouter-r1
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := Antrouter-R1
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := ANTROUTER-R1
- DEVICE_PROFILE := ANTROUTERR1
- TPLINK_HWID := 0x44440101
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += antrouter-r1
-
-define Device/el-m150
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := EasyLink EL-M150
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := EL-M150
- DEVICE_PROFILE := ELM150
- TPLINK_HWID := 0x01500101
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += el-m150
-
-define Device/el-mini
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := EasyLink EL-MINI
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := EL-MINI
- DEVICE_PROFILE := ELMINI
- TPLINK_HWID := 0x01530001
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += el-mini
-
-define Device/gl-inet-6408A-v1
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := GL.iNet 6408
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := GL-INET
- DEVICE_PROFILE := GLINET
- TPLINK_HWID := 0x08000001
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += gl-inet-6408A-v1
-
-define Device/gl-inet-6416A-v1
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := GL.iNet 6416
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := GL-INET
- DEVICE_PROFILE := GLINET
- TPLINK_HWID := 0x08000001
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += gl-inet-6416A-v1
-
-define Device/jwap230
- DEVICE_TITLE := jjPlus JWAP230
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := JWAP230
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += jwap230
-
-define Device/koala
- DEVICE_TITLE := OCEDO Koala
- BOARDNAME := KOALA
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
- IMAGE_SIZE := 7424k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),7424k(firmware),1536k(kernel2),5888k(rootfs2),1088k(data)ro,64k(id)ro,64k(art)ro
-endef
-TARGET_DEVICES += koala
-
-define Device/r36a
- DEVICE_TITLE := ALFA Network R36A
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport -swconfig
- BOARDNAME := R36A
- SUPPORTED_DEVICES := r36a
- IMAGE_SIZE := 15872k
- MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += r36a
-
-define Device/r602n
- DEVICE_TITLE := P&W R602N
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := R602N
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += r602n
-
-define Device/rut900
- DEVICE_TITLE := Teltonika RUT900
- DEVICE_PACKAGES := kmod-usb2 -uboot-envtools
- BOARDNAME := RUT900
- SUPPORTED_DEVICES := rut900
- IMAGE_SIZE := 15552k
- MTDPARTS := spi0.0:128k(u-boot)ro,64k(config)ro,64k(art)ro,15552k(firmware),576k(event-log)ro
- TPLINK_HWID := 0x35000001
- TPLINK_HWREV := 0x1
- TPLINK_HEADER_VERSION := 1
- KERNEL := kernel-bin | patch-cmdline | lzma | tplink-v1-header
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs |\
- pad-rootfs | teltonika-fw-fake-checksum | append-string master |\
- append-md5sum-bin | check-size $$$$(IMAGE_SIZE)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
- append-rootfs | pad-rootfs | append-metadata |\
- check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += rut900
-
-define Device/mc-mac1200r
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := Mercury MAC1200R
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := MC-MAC1200R
- DEVICE_PROFILE := MAC1200R
- TPLINK_HWID := 0x12000001
-endef
-TARGET_DEVICES += mc-mac1200r
-
-define Device/minibox-v1
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := GainStrong MiniBox V1.0
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := MINIBOX-V1
- DEVICE_PROFILE := MINIBOXV1
- TPLINK_HWID := 0x3C000201
- CONSOLE := ttyATH0,115200
- IMAGES := sysupgrade.bin
-endef
-TARGET_DEVICES += minibox-v1
-
-define Device/minibox-v3.2
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := Gainstrong MiniBox V3.2
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca9887-ct -swconfig
- BOARDNAME := MINIBOX-V3.2
- DEVICE_PROFILE := MINIBOXV32
- TPLINK_HWID := 0x3C00010C
-endef
-TARGET_DEVICES += minibox-v3.2
-
-define Device/oolite-v1
- $(Device/minibox-v1)
- DEVICE_TITLE := GainStrong Oolite V1.0
- BOARDNAME := OOLITE-V1
- DEVICE_PROFILE := OOLITEV1
- TPLINK_HWID := 0x3C000101
-endef
-TARGET_DEVICES += oolite-v1
-
-define Device/oolite-v5.2
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := GainStrong Oolite V5.2
- DEVICE_PACKAGES := ath10k-firmware-qca9887-ct kmod-ath10k-ct kmod-usb2
- BOARDNAME := OOLITE-V5-2
- DEVICE_PROFILE := OOLITEV52
- TPLINK_HWID := 0x3C00010B
- IMAGES := sysupgrade.bin
-endef
-TARGET_DEVICES += oolite-v5.2
-
-define Device/oolite-v5.2-dev
- $(Device/oolite-v5.2)
- DEVICE_TITLE := GainStrong Oolite V5.2-Dev (development board)
- BOARDNAME := OOLITE-V5-2-DEV
- DEVICE_PROFILE := OOLITEV52DEV
-endef
-TARGET_DEVICES += oolite-v5.2-dev
-
-define Device/omy-g1
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := OMYlink OMY-G1
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := OMY-G1
- DEVICE_PROFILE := OMYG1
- TPLINK_HWID := 0x06660101
-endef
-TARGET_DEVICES += omy-g1
-
-define Device/omy-x1
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := OMYlink OMY-X1
- BOARDNAME := OMY-X1
- DEVICE_PROFILE := OMYX1
- TPLINK_HWID := 0x06660201
-endef
-TARGET_DEVICES += omy-x1
-
-define Device/onion-omega
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := Onion Omega
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-i2c-core kmod-i2c-gpio-custom kmod-spi-bitbang kmod-spi-dev kmod-spi-gpio kmod-spi-gpio-custom kmod-usb-serial
- BOARDNAME := ONION-OMEGA
- DEVICE_PROFILE := OMEGA
- TPLINK_HWID := 0x04700001
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += onion-omega
-
-define Device/sc1750
- DEVICE_TITLE := Abicom SC1750
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := SC1750
- IMAGE_SIZE := 15744k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
-endef
-TARGET_DEVICES += sc1750
-
-define Device/sc300m
- DEVICE_TITLE := Abicom SC300M
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := SC300M
- IMAGE_SIZE := 15744k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
-endef
-TARGET_DEVICES += sc300m
-
-define Device/sc450
- DEVICE_TITLE := Abicom SC450
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := SC450
- IMAGE_SIZE := 15744k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
-endef
-TARGET_DEVICES += sc450
-
-define Device/smart-300
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := NC-LINK SMART-300
- BOARDNAME := SMART-300
- DEVICE_PROFILE := SMART-300
- TPLINK_HWID := 0x93410001
-endef
-TARGET_DEVICES += smart-300
-
-define Device/som9331
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := OpenEmbed SOM9331
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-i2c-core kmod-i2c-gpio-custom kmod-spi-bitbang kmod-spi-dev kmod-spi-gpio kmod-spi-gpio-custom kmod-usb-serial
- BOARDNAME := SOM9331
- DEVICE_PROFILE := SOM9331
- TPLINK_HWID := 0x04800054
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += som9331
-
-define Device/sr3200
- DEVICE_TITLE := YunCore SR3200
- DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := SR3200
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
-endef
-TARGET_DEVICES += sr3200
-
-define Device/xd3200
- $(Device/sr3200)
- DEVICE_TITLE := YunCore XD3200
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := XD3200
-endef
-TARGET_DEVICES += xd3200
-
-define Device/t830
- DEVICE_TITLE := YunCore T830
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := T830
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
- SUPPORTED_DEVICES := t830
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += t830
-
-define Device/tellstick-znet-lite
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := TellStick ZNet Lite
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-acm kmod-usb-serial kmod-usb-serial-pl2303
- BOARDNAME := TELLSTICK-ZNET-LITE
- DEVICE_PROFILE := TELLSTICKZNETLITE
- TPLINK_HWID := 0x00726001
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += tellstick-znet-lite
-
-define Device/ts-d084
- $(Device/tplink-8mlzma)
- DEVICE_TITLE := PISEN TS-D084
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := TS-D084
- DEVICE_PROFILE := TSD084
- TPLINK_HWID := 0x07030101
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += ts-d084
-
-define Device/n5q
- DEVICE_TITLE := ALFA Network N5Q
- DEVICE_PACKAGES := rssileds -swconfig
- BOARDNAME := N5Q
- SUPPORTED_DEVICES := n5q
- IMAGE_SIZE := 15872k
- MTDPARTS := spi0.0:384k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += n5q
-
-define Device/NBG6616
- DEVICE_TITLE := ZyXEL NBG6616
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-rtc-pcf8563 kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := NBG6616
- KERNEL_SIZE := 2048k
- IMAGE_SIZE := 15323k
- MTDPARTS := spi0.0:192k(u-boot)ro,64k(env),64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware)
- CMDLINE += mem=128M
- RAS_BOARD := NBG6616
- RAS_ROOTFS_SIZE := 14464k
- RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
- IMAGES := factory.bin sysupgrade.bin
- KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage
- IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(IMAGE_SIZE) | zyxel-ras-image
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
- # We cannot currently build a factory image. It is the sysupgrade image
- # prefixed with a header (which is actually written into the MTD device).
- # The header is 2kiB and is filled with 0xff. The format seems to be:
- # 2 bytes: 0x0000
- # 2 bytes: checksum of the data partition (big endian)
- # 4 bytes: length of the contained image file (big endian)
- # 32 bytes: Firmware Version string (NUL terminated, 0xff padded)
- # 2 bytes: 0x0000
- # 2 bytes: checksum over the header partition (big endian)
- # 32 bytes: Model (e.g. "NBG6616", NUL termiated, 0xff padded)
- # rest: 0xff padding
- #
- # The checksums are calculated by adding up all bytes and if a 16bit
- # overflow occurs, one is added and the sum is masked to 16 bit:
- # csum = csum + databyte; if (csum > 0xffff) { csum += 1; csum &= 0xffff };
- # Should the file have an odd number of bytes then the byte len-0x800 is
- # used additionally.
- # The checksum for the header is calcualted over the first 2048 bytes with
- # the firmware checksum as the placeholder during calculation.
- #
- # The header is padded with 0xff to the erase block size of the device.
-endef
-TARGET_DEVICES += NBG6616
-
-define Device/c-55
- DEVICE_TITLE := AirTight Networks C-55
- DEVICE_PACKAGES := kmod-ath9k
- BOARDNAME := C-55
- KERNEL_SIZE := 2048k
- IMAGE_SIZE := 15872k
- MTDPARTS := spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware)
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += c-55
-
-define Device/hiwifi-hc6361
- DEVICE_TITLE := HiWiFi HC6361
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage \
- kmod-fs-ext4 kmod-nls-iso8859-1 e2fsprogs
- BOARDNAME := HiWiFi-HC6361
- DEVICE_PROFILE := HIWIFI_HC6361
- IMAGE_SIZE := 16128k
- KERNEL := kernel-bin | patch-cmdline | lzma | uImageHiWiFi lzma
- CONSOLE := ttyATH0,115200
- MTDPARTS := spi0.0:64k(u-boot)ro,64k(bdinfo)ro,16128k(firmware),64k(backup)ro,64k(art)ro
-endef
-TARGET_DEVICES += hiwifi-hc6361
-
-define Device/seama
- LOADER_TYPE := bin
- BLOCKSIZE := 64k
- KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | seama
- KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX).seama
- SEAMA_MTDBLOCK := 1
- IMAGES := sysupgrade.bin factory.bin
-
- # 64 bytes offset:
- # - 28 bytes seama_header
- # - 36 bytes of META data (4-bytes aligned)
- IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
- IMAGE/sysupgrade.bin := \
- $$(IMAGE/default) | seama | pad-rootfs | \
- check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := \
- $$(IMAGE/default) | seama | pad-rootfs | \
- seama-seal | check-size $$$$(IMAGE_SIZE)
- SEAMA_SIGNATURE :=
-endef
-
-define Device/dir-869-a1
- $(Device/seama)
- DEVICE_TITLE := D-Link DIR-869 rev. A1
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := DIR-869-A1
- IMAGE_SIZE := 15872k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
- SEAMA_SIGNATURE := wrgac54_dlink.2015_dir869
- IMAGE/factory.bin := \
- $$(IMAGE/default) | pad-rootfs -x 64 | \
- seama | seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \
- check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += dir-869-a1
-
-define Device/mynet-n600
- $(Device/seama)
- DEVICE_TITLE := Western Digital My Net N600
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := MYNET-N600
- IMAGE_SIZE := 15808k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
- SEAMA_SIGNATURE := wrgnd16_wd_db600
-endef
-TARGET_DEVICES += mynet-n600
-
-define Device/mynet-n750
- $(Device/seama)
- DEVICE_TITLE := Western Digital My Net N750
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := MYNET-N750
- IMAGE_SIZE := 15808k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
- SEAMA_SIGNATURE := wrgnd13_wd_av
-endef
-TARGET_DEVICES += mynet-n750
-
-define Device/qihoo-c301
- $(Device/seama)
- DEVICE_TITLE := Qihoo C301
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := QIHOO-C301
- IMAGE_SIZE := 15744k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
- SEAMA_SIGNATURE := wrgac26_qihoo360_360rg
-endef
-TARGET_DEVICES += qihoo-c301
-
-define Device/dap-1330-a1
- DEVICE_TITLE := D-Link DAP-1330 rev. A1
- DEVICE_PACKAGES := rssileds
- BOARDNAME := DAP-1330-A1
- IMAGES := factory.img sysupgrade.bin
- IMAGE_SIZE := 7936k
- IMAGE/factory.img := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | mkdapimg2 917504
- MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,64k(mp)ro,64k(config)ro,7936k(firmware)
- DAP_SIGNATURE := HONEYBEE-FIRMWARE-DAP-1330
-endef
-TARGET_DEVICES += dap-1330-a1
-
-define Device/dap-2695-a1
- DEVICE_TITLE := D-Link DAP-2695 rev. A1
- DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct
- BOARDNAME := DAP-2695-A1
- IMAGES := factory.img sysupgrade.bin
- IMAGE_SIZE := 15360k
- IMAGE/factory.img := append-kernel | pad-offset 65536 160 | append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size $$$$(IMAGE_SIZE)
- IMAGE/sysupgrade.bin := append-kernel | pad-offset 65536 160 | mkwrggimg | append-rootfs | wrgg-pad-rootfs | check-size $$$$(IMAGE_SIZE)
- KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
- KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
- MTDPARTS := spi0.0:256k(bootloader)ro,64k(bdcfg)ro,64k(rgdb)ro,64k(langpack)ro,15360k(firmware),448k(captival)ro,64k(certificate)ro,64k(radiocfg)ro
- DAP_SIGNATURE := wapac02_dkbs_dap2695
-endef
-TARGET_DEVICES += dap-2695-a1
-
-define Device/wam250
- DEVICE_TITLE := Samsung WAM250
- DEVICE_PACKAGES := kmod-usb2 -swconfig
- BOARDNAME := WAM250
- IMAGE_SIZE := 15872k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),128k(nvram)ro,15872k(firmware),64k(art)ro
- SUPPORTED_DEVICES := wam250
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) |\
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += wam250
-
-define Device/wifi-pineapple-nano
- $(Device/tplink-16mlzma)
- DEVICE_TITLE := Hak5 WiFi Pineapple NANO
- DEVICE_PACKAGES := kmod-ath9k-htc kmod-usb2 kmod-usb-storage \
- -swconfig -uboot-envtools
- BOARDNAME := WIFI-PINEAPPLE-NANO
- DEVICE_PROFILE := WIFIPINEAPPLENANO
- TPLINK_HWID := 0x4e414e4f
- CONSOLE := ttyATH0,115200
- IMAGES := sysupgrade.bin
-endef
-TARGET_DEVICES += wifi-pineapple-nano
-
-define Device/wlr8100
- DEVICE_TITLE := Sitecom WLR-8100
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb3 \
- kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := WLR8100
- IMAGE_SIZE := 15424k
- MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,15424k(firmware),256k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(art)ro
-endef
-TARGET_DEVICES += wlr8100
-
-define Device/wpj-16m
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- MTDPARTS := spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
- IMAGE_SIZE := 16128k
-endef
-
-define Device/wpj342
- $(Device/wpj-16m)
- DEVICE_TITLE := Compex WPJ342 (16MB flash)
- BOARDNAME := WPJ342
-endef
-TARGET_DEVICES += wpj342
-
-define Device/wpj344
- $(Device/wpj-16m)
- DEVICE_TITLE := Compex WPJ344 (16MB flash)
- BOARDNAME := WPJ344
- SUPPORTED_DEVICES := wpj344
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += wpj344
-
-define Device/wpj531
- $(Device/wpj-16m)
- DEVICE_TITLE := Compex WPJ531 (16MB flash)
- BOARDNAME := WPJ531
-endef
-TARGET_DEVICES += wpj531
-
-define Device/wpj558
- $(Device/wpj-16m)
- DEVICE_TITLE := Compex WPJ558 (16MB flash)
- BOARDNAME := WPJ558
- SUPPORTED_DEVICES := wpj558
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += wpj558
-
-define Device/wpj563
- $(Device/wpj-16m)
- DEVICE_TITLE := Compex WPJ563 (16MB flash)
- BOARDNAME := WPJ563
-endef
-TARGET_DEVICES += wpj563
-
-define Device/wrtnode2q
- DEVICE_TITLE := WRTnode2Q
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage
- BOARDNAME := WRTNODE2Q
- IMAGE_SIZE := 16064k
- MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,16064k(firmware),16384k@0x0(fullflash)
-endef
-TARGET_DEVICES += wrtnode2q
-
-define Device/AVM
- DEVICE_PACKAGES := fritz-tffs -uboot-envtools
- KERNEL := kernel-bin | patch-cmdline | lzma | eva-image
- KERNEL_INITRAMFS := $$(KERNEL)
- IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
- append-squashfs-fakeroot-be | pad-to 256 | \
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/fritz300e
- $(call Device/AVM)
- DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
- DEVICE_PACKAGES += rssileds -swconfig
- BOARDNAME := FRITZ300E
- SUPPORTED_DEVICES := fritz300e
- IMAGE_SIZE := 15232k
-endef
-TARGET_DEVICES += fritz300e
-
-define Device/fritz4020
- $(call Device/AVM)
- DEVICE_TITLE := AVM FRITZ!Box 4020
- DEVICE_PACKAGES += kmod-usb2 kmod-usb-storage
- BOARDNAME := FRITZ4020
- SUPPORTED_DEVICES := fritz4020
- IMAGE_SIZE := 15232k
-endef
-TARGET_DEVICES += fritz4020
-
-define Device/fritz450e
- $(call Device/AVM)
- DEVICE_TITLE := AVM FRITZ!WLAN Repeater 450E
- DEVICE_PACKAGES += -swconfig
- BOARDNAME := FRITZ450E
- SUPPORTED_DEVICES := fritz450e
- IMAGE_SIZE := 15232k
-endef
-TARGET_DEVICES += fritz450e
diff --git a/target/linux/ar71xx/image/legacy.mk b/target/linux/ar71xx/image/legacy.mk
deleted file mode 100644
index 926ce780b4..0000000000
--- a/target/linux/ar71xx/image/legacy.mk
+++ /dev/null
@@ -1,1059 +0,0 @@
-rootfs_type=$(patsubst squashfs-%,squashfs,$(1))
-
-# $(1): rootfs type.
-# $(2): board name.
-define imgname
-$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1))
-endef
-
-define rootfs_align
-$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
-endef
-
-define sysupname
-$(call imgname,$(1),$(2))-sysupgrade.bin
-endef
-
-define factoryname
-$(call imgname,$(1),$(2))-factory.bin
-endef
-
-COMMA:=,
-
-define mkcmdline
-$(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3))
-endef
-
-define mtdpartsize
-$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024)))
-endef
-
-# $(1) : name of image build method to be used, e.g., AthLzma.
-# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc.
-# $(3) : name of the profile to be defined.
-# $(4) : board name.
-# $(5)~$(7) : arguments for $(mkcmdline)
-# board=$(1) console=$(2),$(3)
-# $(8)~$(14): extra arguments.
-define SingleProfile
- # $(1): action name, e.g. loader, buildkernel, squashfs, etc.
- define Image/Build/Profile/$(3)
- $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14))
- endef
-endef
-
-LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR)
-
-VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
-UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
-
-# $(1): input file.
-# $(2): output file.
-# $(3): extra arguments for lzma.
-define CompressLzma
- $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2)
-endef
-
-define PatchKernel
- cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
- $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
-endef
-
-define PatchKernel/initramfs
- $(call PatchKernel,$(1),$(2),-initramfs)
- cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin
-endef
-
-# $(1): board name.
-# $(2): kernel command line.
-# $(3): extra argumetns for lzma.
-# $(4): name suffix, e.g. "-initramfs".
-define PatchKernelLzma
- cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1)
- $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))"
- $(call CompressLzma,$(KDIR_TMP)/vmlinux$(4)-$(1),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(3))
-endef
-
-define PatchKernelGzip
- cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1)
- $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))"
- gzip -9n -c $(KDIR_TMP)/vmlinux$(3)-$(1) > $(KDIR_TMP)/vmlinux$(3)-$(1).bin.gz
-endef
-
-ifneq ($(SUBTARGET),mikrotik)
-# $(1): compression method of the data.
-# $(2): extra arguments.
-# $(3): input data file.
-# $(4): output file.
-define MkuImage
- mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \
- -e 0x80060000 -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
- -d $(3) $(4)
-endef
-
-# $(1): board name.
-# $(2): kernel command line.
-# $(3): extra arguments for lzma.
-# $(4): name suffix, e.g. "-initramfs".
-# $(5): extra arguments for mkimage.
-define MkuImageLzma
- $(call PatchKernelLzma,$(1),$(2),$(3),$(4))
- $(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage)
-endef
-
-define MkuImageLzma/initramfs
- $(call PatchKernelLzma,$(1),$(2),$(3),-initramfs)
- $(call MkuImage,lzma,$(4),$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.lzma,$(call imgname,initramfs,$(1))-uImage.bin)
-endef
-
-define MkuImageGzip
- $(call PatchKernelGzip,$(1),$(2))
- $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-$(1).bin.gz,$(KDIR_TMP)/vmlinux-$(1).uImage)
-endef
-
-define MkuImageGzip/initramfs
- $(call PatchKernelGzip,$(1),$(2),-initramfs)
- $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.gz,$(call imgname,initramfs,$(1))-uImage.bin)
-endef
-
-define MkuImageOKLI
- $(call MkuImage,lzma,-M 0x4f4b4c49,$(KDIR)/vmlinux.bin.lzma,$(KDIR_TMP)/vmlinux-$(1).okli)
-endef
-endif
-
-# $(1): name of the 1st file.
-# $(2): size limit of the 1st file if it is greater than 262144, or
-# the erase size of the flash if it is greater than zero and less
-# than 262144
-# $(3): name of the 2nd file.
-# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise
-# it is the size limit of the output file
-# $(5): name of the output file.
-# $(6): padding size.
-define CatFiles
- if [ $(2) -eq 0 ]; then \
- filename="$(3)"; fstype=$${filename##*\.}; \
- case "$${fstype}" in \
- *) bs=`stat -c%s $(1)`;; \
- esac; \
- ( dd if=$(1) bs=$${bs} conv=sync; cat $(3) ) > $(5); \
- if [ -n "$(6)" ]; then \
- case "$${fstype}" in \
- squashfs*) \
- padjffs2 $(5) $(6); \
- ;; \
- esac; \
- fi; \
- if [ `stat -c%s $(5)` -gt $(4) ]; then \
- echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
- rm -f $(5); \
- fi; \
- else if [ $(2) -gt 262144 ]; then \
- if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
- echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \
- else if [ `stat -c%s $(3)` -gt $(4) ]; then \
- echo "Warning: $(3) is too big (> $(4) bytes)" >&2; \
- else \
- ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
- fi; fi; \
- else \
- ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
- if [ `stat -c%s $(5)` -gt $(4) ]; then \
- echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \
- rm -f $(5); \
- fi; \
- fi; fi
-endef
-
-# $(1): rootfs type.
-# $(2): board name.
-# $(3): kernel image size limit.
-# $(4): rootfs image size limit.
-# $(5): padding argument for padjffs2.
-Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5)))
-Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5))
-Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2)))
-
-# $(1): ubinize ini file
-# $(2): working directory
-# $(3): output file
-# $(4): physical erase block size
-# $(5): minimum I/O unit size
-# $(6): custom options
-define ubinize
- $(CP) $(1) $(2)
- ( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1))
-endef
-
-#
-# Embed lzma-compressed kernel inside lzma-loader.
-#
-# $(1), suffix of output filename, e.g. generic, lowercase board name, etc.
-# $(2), suffix of target file to build, e.g. bin, gz, elf
-# $(3), kernel command line to pass from lzma-loader to kernel
-# $(4), unused here
-# $(5), suffix of kernel filename, e.g. -initramfs, or empty
-define Image/BuildLoader
- -rm -rf $(KDIR)/lzma-loader
- $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\
- LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
- LOADER_DATA="$(KDIR)/vmlinux$(5).bin.lzma" BOARD="$(1)" \
- compile loader.$(2)
- -$(if $(5),$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2))
-endef
-
-#
-# Build lzma-loader alone which will search for lzma-compressed kernel identified by
-# uImage header with magic "OKLI" at boot time.
-#
-# $(4), offset into the flash space to start searching uImage magic "OKLI".
-# $(5), size of search range starting at $(4). With 0 as the value, uImage
-# header is expected to be at precisely $(4)
-define Image/BuildLoaderAlone
- -rm -rf $(KDIR)/lzma-loader
- $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \
- LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \
- BOARD="$(1)" FLASH_OFFS=$(4) FLASH_MAX=$(5) \
- compile loader.$(2)
-endef
-
-define Build/Clean
- $(LOADER_MAKE) clean
-endef
-
-alfa_ap120c_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,13312k(rootfs),1536k(kernel),1152k(unknown)ro,64k(art)ro;spi0.1:-(unknown)
-alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware)
-alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
-alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro
-all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art)ro
-all0315n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),13568k(firmware),2048k(failsafe),256k(art)ro
-ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1728k(kernel),64k(art)ro,7872k@0x40000(firmware)
-ap121_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
-ap121_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,10944k(rootfs),4992k(kernel),64k(nvram),64k(art)ro,15936k@0x50000(firmware)
-ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art)ro,7808k@0x50000(firmware)
-ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
-ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware)
-ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k@0x50000(firmware)
-ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
-ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
-ap152_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
-bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro
-cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro
-cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro
-cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro
-cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware)
-cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware)
-cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro
-cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro
-cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro
-cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art)ro,13632k@0xa0000(firmware)
-eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro
-db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
-dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
-dlan_hotspot_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(Config1)ro,64k(Config2)ro,7872k@0x40000(firmware),64k(art)ro
-dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,7680k@0x70000(firmware),64k(art)ro
-dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,15872k@0x70000(firmware),64k(art)ro
-cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy)
-cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
-esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
-esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
-epg5000_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware)
-f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware)
-dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy)
-dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig)
-planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro
-whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro
-wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),64k(nvram)ro,64k(art)ro
-wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
-wnr2000_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
-wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
-wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro
-r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata)ro,256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter)
-tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro
-wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata)ro,512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
-zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
-mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro
-zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k@0x0(zyxel_rfsd),2048k@0x200000(romd),1024k@0x400000(header),2048k@0x500000(kernel),125952k@0x500000(firmware),-@0x700000(ubi)
-
-define Image/BuildKernel
- cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
- cp $(KDIR)/vmlinux $(VMLINUX).bin
- dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync
- $(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin)
- cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf
- -mkdir -p $(KDIR_TMP)
-endef
-
-define Image/BuildKernel/Initramfs
- cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf
- cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin
- dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync
- $(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin)
- cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf
- $(call Image/Build/Initramfs)
-endef
-
-Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3))
-
-define Image/Build/WRT400N
- $(call Sysupgrade/KRuImage,$(1),$(2),1310720,6488064)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- wrt400n $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-
-define Image/Build/CameoAP94/buildkernel
- $(call MkuImageLzma,$(2),$(3) $(4))
- $(call MkuImageLzma,$(2)-fat,$(3) $(5))
-endef
-
-define Image/Build/CameoAP94
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval fwsize_fat=$(call mtdpartsize,firmware,$(5)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- ( \
- dd if=$(call sysupname,$(1),$(2)); \
- echo -n "$(6)"; \
- ) > $(call imgname,$(1),$(2))-backup-loader.bin; \
- if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \
- echo "Warning: $(call sysupname,$(1),$(2)) is too big" >&2; \
- else \
- ( \
- dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \
- echo -n "$(7)"; \
- ) > $(call factoryname,$(1),$(2)); \
- fi; \
- fi
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64)
- if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \
- echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \
- sh $(TOPDIR)/scripts/combined-image.sh \
- "$(KDIR_TMP)/$(2)-fat.bin" \
- "$(KDIR_TMP)/$(2)-fat.dummy" \
- $(call sysupname,$(1),$(2)-fat); \
- fi
-endef
-
-define Image/Build/WZRHP
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(3)-4*$(4)*1024)),$(4))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- ( \
- echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
- dd if=$(call sysupname,$(1),$(2)); \
- ) > $(call imgname,$(1),$(2))-tftp.bin; \
- buffalo-enc -p $(5) -v 1.99 \
- -i $(call sysupname,$(1),$(2)) \
- -o $(KDIR_TMP)/$(2).enc; \
- buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
- -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
- -i $(KDIR_TMP)/$(2).enc \
- -o $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-Image/Build/WZRHP64K/buildkernel=$(call MkuImageLzma,$(2),$(3))
-Image/Build/WZRHP64K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-Image/Build/WZRHP64K=$(call Image/Build/WZRHP,$(1),$(2),33095680,64,$(4))
-
-Image/Build/WZRHP128K/buildkernel=$(call MkuImageLzma,$(2),$(3))
-Image/Build/WZRHP128K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-Image/Build/WZRHP128K=$(call Image/Build/WZRHP,$(1),$(2),33030144,128,$(4))
-
-
-Image/Build/WHRHPG300N/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/WHRHPG300N/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/WHRHPG300N
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- ( \
- echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \
- dd if=$(call sysupname,$(1),$(2)); \
- ) > $(call imgname,$(1),$(2))-tftp.bin; \
- buffalo-enc -p $(5) -v 1.99 \
- -i $(call sysupname,$(1),$(2)) \
- -o $(KDIR_TMP)/$(2).enc; \
- buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \
- -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \
- -i $(KDIR_TMP)/$(2).enc \
- -o $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-
-define Image/Build/Cameo
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- factory_size=$$(($(fwsize) - $(6))); \
- ( \
- dd if=$(call sysupname,$(1),$(2)) bs=$${factory_size} conv=sync; \
- echo -n $(5); \
- ) > $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-Image/Build/CameoAP81/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap81_mtdlayout))
-Image/Build/CameoAP81=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap81_mtdlayout),$(4),65536)
-Image/Build/CameoAP81/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap81_mtdlayout))
-
-Image/Build/CameoAP91/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap91_mtdlayout))
-Image/Build/CameoAP91=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap91_mtdlayout),$(4),65536)
-Image/Build/CameoAP91/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap91_mtdlayout))
-
-Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtdlayout))
-Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536)
-Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout))
-
-Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
-Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26)
-Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M))
-
-Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26)
-Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout))
-Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26)
-Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout))
-
-Image/Build/CameoDB120_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout_8M))
-Image/Build/CameoDB120_8M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout_8M),$(4),26)
-Image/Build/CameoDB120_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout_8M))
-
-define Image/Build/CameoHornet
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- for r in $(7); do \
- [ -n "$$r" ] && dashr="-$$r" || dashr=; \
- [ -z "$$r" ] && r="DEF"; \
- mkcameofw -M HORNET -R "$$r" -S $(5) -V $(6) -c \
- -K $(8) -I $(fwsize) \
- -k "$(call sysupname,$(1),$(2))" \
- -o $(call imgname,$(1),$(2))-factory$$dashr.bin; \
- true; \
- done; \
- fi
-endef
-
-Image/Build/CameoAP121/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout))
-Image/Build/CameoAP121=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout),$(4),$(5),$(6),0xe0000)
-Image/Build/CameoAP121/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout))
-
-Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
-Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000)
-Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M))
-
-define Image/Build/dLAN
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
- $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
- $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
-endef
-
-Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
-Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/Ath
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
- $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
- $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
-endef
-
-Image/Build/AthGzip/buildkernel=$(call MkuImageGzip,$(2),$(3) $(4))
-Image/Build/AthGzip=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
-Image/Build/AthGzip/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(4))
-
-Image/Build/AthLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7))
-Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-
-Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/Belkin
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
- $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
- $(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \
- -n "uImage" \
- -i $(KDIR_TMP)/vmlinux-$(2).uImage \
- -o $(KDIR_TMP)/$(2)-uImage; \
- edimax_fw_header -m $(5) -v "$(shell echo -n $(VERSION_DIST)$(REVISION) | cut -c -13)" \
- -n "rootfs" \
- -i $(KDIR)/root.$(1) \
- -o $(KDIR_TMP)/$(2)-rootfs; \
- ( \
- dd if=$(KDIR_TMP)/$(2)-rootfs; \
- dd if=$(KDIR_TMP)/$(2)-uImage; \
- ) > "$(call factoryname,$(1),$(2))"; \
- fi
-endef
-
-define Image/Build/EnGenius
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(eval rootsize=$(call mtdpartsize,rootfs,$(4)))
- $(eval kernsize=$(call mtdpartsize,kernel,$(4)))
- $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize)))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- mksenaofw -e $(call sysupname,$(1),$(2)) \
- -o $(call imgname,$(1),$(2))-factory.dlf \
- -r 0x101 -p $(7) -t 2; \
- fi
-endef
-
-Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-
-Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3))
-
-define Image/Build/PB4X
- dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
- of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync
- dd if=$(KDIR)/root.$(1) \
- of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync
- -sh $(TOPDIR)/scripts/combined-image.sh \
- "$(call imgname,kernel,$(2)).bin" \
- "$(call imgname,$(1),$(2)-rootfs).bin" \
- $(call sysupname,$(1),$(2))
-endef
-
-
-Image/Build/MyLoader/buildkernel=$(call PatchKernelLzma,$(2),$(3))
-Image/Build/MyLoader/initramfs=$(call PatchKernel/initramfs,$(2),$(3))
-
-define Image/Build/MyLoader
- $(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024))))
- $(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin)
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage))
- if [ -e "$(fwimage)" ]; then \
- $(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \
- -p0x00030000:0:al:0x80060000:firmware:$(fwimage) \
- $(call imgname,$(1),$(2))-$(5)-factory.img; \
- echo -n "" > $(KDIR_TMP)/empty.bin; \
- sh $(TOPDIR)/scripts/combined-image.sh \
- $(fwimage) $(KDIR_TMP)/empty.bin \
- $(call imgname,$(1),$(2))-$(5)-sysupgrade.bin; \
- fi
-endef
-
-Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout))
-Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0)
-
-define Image/Build/Planex/buildkernel
- [ -e "$(KDIR)/loader-$(2).gz" ]
- $(call MkuImageOKLI,$(2))
- ( \
- dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \
- dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \
- ) > $(KDIR_TMP)/kernel-$(2).bin
- $(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage)
-endef
-
-define Image/Build/Planex
- $(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout)))
- $(call Sysupgrade/KRuImage,$(1),$(2),0,$$(($(fwsize)-4*64*1024)),64)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- $(STAGING_DIR_HOST)/bin/mkplanexfw \
- -B $(2) \
- -v 2.00.00 \
- -i $(call sysupname,$(1),$(2)) \
- -o $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-
-Image/Build/ALFA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/ALFA/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/ALFA
- $(call Sysupgrade/RKuImage,$(1),$(2),$(5),$(6))
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- rm -rf $(KDIR)/$(1); \
- mkdir -p $(KDIR)/$(1); \
- cd $(KDIR)/$(1); \
- cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/$(1)/$(7); \
- cp $(KDIR)/root.$(1) $(KDIR)/$(1)/$(8); \
- $(TAR) c \
- $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
- -C $(KDIR)/$(1) $(7) $(8) \
- | gzip -9nc > $(call factoryname,$(1),$(2)); \
- ( \
- echo WRM7222C | dd bs=32 count=1 conv=sync; \
- echo -ne '\xfe'; \
- ) >> $(call factoryname,$(1),$(2)); \
- fi
-endef
-
-
-Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/Senao
- mkdir -p $(KDIR_TMP)/$(2)/
- touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2)
- -$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/
- dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \
- of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync
- dd if=$(KDIR)/root.$(1) \
- of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync
- ( \
- cd $(KDIR_TMP)/$(2)/; \
- $(TAR) -c \
- $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
- * | gzip -9nc > $(call factoryname,$(1),$(2)) \
- )
- -rm -rf $(KDIR_TMP)/$(2)/
- -sh $(TOPDIR)/scripts/combined-image.sh \
- $(KDIR_TMP)/vmlinux-$(2).uImage \
- $(KDIR)/root.$(1) \
- $(call sysupname,$(1),$(2))
-endef
-
-define Image/Build/CyberTAN
- echo -n '' > $(KDIR_TMP)/empty.bin
- -$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \
- -f $(KDIR_TMP)/vmlinux-$(2).uImage -F $(KDIR_TMP)/empty.bin \
- -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \
- $(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) \
- -i $(KDIR)/image.tmp \
- -o $(call sysupname,$(1),$(2))
- -$(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR_TMP)/vmlinux-$(2).uImage \
- -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) && \
- $(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) -g \
- -i $(KDIR)/image.tmp \
- -o $(call factoryname,$(1),$(2))
- -rm $(KDIR)/image.tmp
-endef
-
-Image/Build/CyberTANGZIP/loader=$(call Image/BuildLoader,$(1),gz,$(2),0x80060000)
-Image/Build/CyberTANGZIP/buildkernel=$(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage)
-Image/Build/CyberTANGZIP=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
-
-Image/Build/CyberTANLZMA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/CyberTANLZMA=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5))
-
-
-Image/Build/Netgear/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
-
-define Image/Build/Netgear/buildkernel
- $(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
- -rm -rf $(KDIR_TMP)/$(2)
- mkdir -p $(KDIR_TMP)/$(2)/image
- cat $(KDIR_TMP)/vmlinux-$(2).uImage > $(KDIR_TMP)/$(2)/image/uImage
- $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
- $(KDIR_TMP)/$(2) $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1 \
- -noappend -root-owned -be -b 65536 \
- $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
- ( \
- cat $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1; \
- dd if=/dev/zero bs=1k count=1 \
- ) > $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2
- mkimage -A mips -O linux -T filesystem -C none -M $(5) \
- -a 0xbf070000 -e 0xbf070000 \
- -n 'MIPS $(VERSION_DIST) Linux-$(LINUX_VERSION)' \
- -d $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 \
- $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs
-endef
-
-define Image/Build/Netgear
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
- if [ -e $(call sysupname,$(1),$(2)) ]; then \
- for r in $(7) ; do \
- [ -n "$$r" ] && dashr="-$$r" || dashr= ; \
- $(STAGING_DIR_HOST)/bin/mkdniimg \
- -B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \
- -i $(call sysupname,$(1),$(2)) \
- -o $(call imgname,$(1),$(2))-factory$$dashr.img; \
- done; \
- fi
- if [ "$2" = "wnr2000" ]; then \
- dd if=$(KDIR)/root.$(1) \
- of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \
- fi
-endef
-
-
-Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
-Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5))
-
-define Image/Build/NetgearLzma
- $(eval fwsize=$(call mtdpartsize,firmware,$(4)))
- $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64)
-endef
-
-
-Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5))
-
-# $(1): (empty)
-# $(2): Board name (small caps)
-# $(3): Kernel board specific cmdline
-# $(4): Kernel mtdparts definition
-# $(5): U-Boot magic
-define Image/Build/NetgearNAND/buildkernel
- $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
- $(call PatchKernelLzma,$(2),$(3) $(4),-d20)
- dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
- of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \
- bs=$$(($(kernelsize)-131072-2*64-1)) \
- count=1 conv=sync
- $(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage)
- echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage
- # create a fake rootfs image
- dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1
- mkimage -A mips -O linux -T filesystem -C none \
- -a 0xbf070000 -e 0xbf070000 \
- -n 'MIPS $(VERSION_DIST) fakeroot' \
- -d $(KDIR_TMP)/fakeroot-$(2) \
- -M $(5) \
- $(KDIR_TMP)/fakeroot-$(2).uImage
- # append the fake rootfs image to the kernel, it will reside in the last
- # erase block of the kernel partition
- cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage
-endef
-
-
-# $(1): rootfs image suffix
-# $(2): Board name (small caps)
-# $(3): Kernel board specific cmdline
-# $(4): Kernel mtdparts definition
-# $(5): U-Boot magic
-# $(6): Board name (upper caps)
-# $(7): firmware region code (not used yet)
-# $(8): DNI Hardware version
-# $(9): suffix of the configuration file for ubinize
-define Image/Build/NetgearNAND
- $(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
- $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
- $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
- $(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs
- echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
- $(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
- ( \
- dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \
- dd if=$(KDIR_TMP)/$(2)-root.ubi \
- ) > $(imageraw)
- $(STAGING_DIR_HOST)/bin/mkdniimg \
- -B $(6) -v $(VERSION_DIST).$(REVISION) -r "$$r" $(8) \
- -i $(imageraw) \
- -o $(call imgname,ubi,$(2))-factory.img
-
- $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage)
-endef
-
-ZYXEL_UBOOT = $(KDIR)/u-boot-nbg460n_550n_550nh.bin
-ZYXEL_UBOOT_BIN = $(wildcard $(BIN_DIR)/u-boot-nbg460n_550n_550nh/u-boot.bin)
-
-Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3))
-
-define Image/Build/ZyXEL
- $(call Sysupgrade/KRuImage,$(1),$(2),917504,2752512)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- if [ ! -f $(ZYXEL_UBOOT) ]; then \
- echo "Warning: $(ZYXEL_UBOOT) not found" >&2; \
- else \
- $(STAGING_DIR_HOST)/bin/mkzynfw \
- -B $(4) \
- -b $(ZYXEL_UBOOT) \
- -r $(call sysupname,$(1),$(2)):0x10000 \
- -o $(call factoryname,$(1),$(2)); \
- fi; fi
-endef
-
-# attention: only zlib compression is allowed for the boot fs
-define Image/Build/ZyXELNAND/buildkernel
- $(eval kernelsize=$(call mtdpartsize,kernel,$(5)))
- $(call MkuImageLzma,$(2),$(3) $(5) $(6))
- mkdir -p $(KDIR_TMP)/$(2)/image/boot
- cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage
- $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
- --pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
- -o $(KDIR_TMP)/$(2)-kernel.jffs2 \
- -d $(KDIR_TMP)/$(2)/image \
- 2>&1 1>/dev/null | awk '/^.+$$/'
- -rm -rf $(KDIR_TMP)/$(2)
-endef
-
-define Image/Build/ZyXELNAND
- if [ "$(1)" != "squashfs" ]; then \
- echo Only squashfs is supported; \
- return 0; \
- fi
- $(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
- $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
- $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
- $(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img
- $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5)
- ( \
- dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \
- dd if=$(KDIR_TMP)/$(2)-root.ubi \
- ) > $(imageraw)
- dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \
- bs=128k conv=sync
- $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2)
-endef
-
-
-Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2))
-Image/Build/OpenMesh/initramfs=$(call MkuImageLzma/initramfs,$(2),)
-
-define Image/Build/OpenMesh
- -sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \
- "$(4)" \
- "$(BUILD_DIR)/fwupgrade.cfg-$(4)" \
- "$(KDIR_TMP)/vmlinux-$(2).uImage" \
- "$(KDIR)/root.$(1)"
- -sh $(TOPDIR)/scripts/combined-ext-image.sh \
- "$(4)" "$(call factoryname,$(1),$(2))" \
- "$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \
- "$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \
- "$(KDIR)/root.$(1)" "rootfs"
- if [ -e "$(call factoryname,$(1),$(2))" ]; then \
- cp "$(call factoryname,$(1),$(2))" "$(call sysupname,$(1),$(2))"; \
- fi
-endef
-
-
-Image/Build/Zcomax/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4))
-Image/Build/Zcomax/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4))
-
-define Image/Build/Zcomax
- $(call Sysupgrade/RKuImage,$(1),$(2),1507328,6356992)
- if [ -e "$(call sysupname,$(1),$(2))" ]; then \
- $(STAGING_DIR_HOST)/bin/mkzcfw \
- -B $(2) \
- -k $(KDIR_TMP)/vmlinux-$(2).uImage \
- -r $(KDIR)/root.$(1) \
- -o $(call imgname,$(1),$(2))-factory.img; \
- fi
-endef
-
-
-# $(1): template name to be defined.
-# $(2): squashfs suffix to be used.
-define BuildTemplate
- # $(1) : name of build method.
- # $(2) : board name.
- # $(3) : kernel command line.
- # $(4)~$(8): extra arguments.
- define Image/Build/Template/$(1)/initramfs
- $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
- endef
- define Image/Build/Template/$(1)/loader
- $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
- endef
- define Image/Build/Template/$(1)/buildkernel
- $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
- endef
- define Image/Build/Template/$(1)/squashfs
- $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10))
- endef
-endef
-
-$(eval $(call BuildTemplate,squashfs-only))
-$(eval $(call BuildTemplate,64k,-64k))
-$(eval $(call BuildTemplate,64kraw,-raw))
-$(eval $(call BuildTemplate,64kraw-nojffs,-raw))
-$(eval $(call BuildTemplate,128k))
-$(eval $(call BuildTemplate,128kraw,-raw))
-$(eval $(call BuildTemplate,256k))
-$(eval $(call BuildTemplate,all))
-
-ifeq ($(SUBTARGET),generic)
-$(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2))
-$(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image))
-$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image))
-
-$(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage,65536))
-
-$(eval $(call SingleProfile,AthLzma,64k,ALFAAP120C,alfa-ap120c,ALFA-AP120C,ttyS0,115200,$$(alfa_ap120c_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536))
-$(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144))
-$(eval $(call SingleProfile,AthLzma,64k,AP121_8M,ap121-8M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_8M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP121_16M,ap121-16M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_16M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,AP152_16M,ap152-16M,AP152,ttyS0,115200,$$(ap152_mtdlayout_16M),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage))
-$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage))
-$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
-$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
-
-$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
-
-$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00"))
-$(eval $(call SingleProfile,CameoAP135,64kraw,TEW823DRU,tew-823dru,TEW-823DRU,ttyS0,115200,$$(tew823dru_mtdlayout) mem=256M,"00AP135AR9558-RT-131129-00"))
-
-$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
-$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
-$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
-
-$(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,ttyS0,115200,"00DB120AR9341-RT-120906-NA"))
-
-$(eval $(call SingleProfile,CyberTANGZIP,64k,E2100L,e2100l,E2100L,ttyS0,115200,,1.00.01))
-$(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01))
-
-$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01))
-
-$(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
-$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01))
-$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00))
-
-$(eval $(call SingleProfile,dLANLzma,64k,dLAN_Hotspot,dlan-hotspot,dLAN-Hotspot,ttyATH0,115200,$$(dlan_hotspot_mtdlayout) mem=64M,KRuImage,65536))
-$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) mem=128M,KRuImage,65536))
-$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) mem=128M,KRuImage,65536))
-
-$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e))
-$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61))
-$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71))
-
-$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M))
-$(eval $(call SingleProfile,MyLoader,64k,WP543_16M,wp543,,ttyS0,115200,0x1000000,16M))
-$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M))
-$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M))
-
-$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,wnr2200,"" NA,))
-
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,A60,a60,,,,A60))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5PAC,om5pac,,,,OM5PAC))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900))
-$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR1750,mr1750,,,,MR1750))
-
-$(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,JA76PF,ja76pf,JA76PF,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,JA76PF2,ja76pf2,JA76PF2,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200))
-$(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200))
-
-$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200))
-$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200))
-
-$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout)))
-
-$(eval $(call SingleProfile,WRT400N,64k,WRT400N,wrt400n,WRT400N,ttyS0,115200))
-
-$(eval $(call SingleProfile,WZRHP128K,128kraw,WZRHPG300NH,wzr-hp-g300nh,WZR-HP-G300NH,ttyS0,115200,WZR-HP-G300NH))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP))
-$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2))
-
-$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout)))
-$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout)))
-
-endif # ifeq ($(SUBTARGET),generic)
-
-
-ifeq ($(SUBTARGET),tiny)
-
-$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC))
-
-$(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00"))
-$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02"))
-$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01"))
-
-$(eval $(call SingleProfile,CameoAP99,64kraw,EBR2310C1,ebr-2310-c1,EBR-2310-C1,ttyS0,115200,"AP91-AR7240-RT-090223-03"))
-$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00"))
-$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05"))
-
-$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00"))
-$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00"))
-
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03"))
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00"))
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_FW,tew-652brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-080609-05"))
-$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_RECOVERY,tew-652brp-recovery,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-02"))
-
-$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,""))
-$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
-
-$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M))
-$(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4M))
-
-$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,-H 29763551+04+32))
-$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,))
-$(eval $(call SingleProfile,Netgear,64kraw,WNR2000,wnr2000,WNR2000,ttyS0,115200,$$(wnr2000_mtdlayout),0x32303031,WNR2000,"" NA,))
-$(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",))
-$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",))
-$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",))
-$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",))
-$(eval $(call SingleProfile,Netgear,64kraw,WPN824N,wpn824n,WPN824N,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31313030,WPN824N,"" NA,))
-
-$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
-$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N))
-$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN))
-$(eval $(call SingleProfile,WHRHPG300N,64kraw,WLAEAG300N,wlae-ag300n,WLAE-AG300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WLAE-AG300N))
-
-$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N))
-
-endif # ifeq ($(SUBTARGET),tiny)
-
-
-ifeq ($(SUBTARGET),nand)
-
-$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300))
-$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300))
-$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300))
-
-$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M))
-
-endif # ifeq ($(SUBTARGET),nand)
-
-define Image/Build/squashfs
- cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw
- cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-64k
- $(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs-64k 64
- $(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
- dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
-endef
-
-define Image/Prepare
- $(if $(wildcard $(ZYXEL_UBOOT_BIN)),cp $(ZYXEL_UBOOT_BIN) $(ZYXEL_UBOOT))
- $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- $(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma)
- $(call Image/BuildLoader,generic,elf,,,-initramfs)
-endif
- $(call Image/BuildLoader,generic,elf)
-endef
-
-define Image/Prepare/Profile
- $(call Image/Build/Profile/$(1),loader)
-endef
-
-define Image/Build/Profile
- $(call Image/Build/Profile/$(1),buildkernel)
- $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),$(call Image/Build/Profile/$(1),initramfs))
- $(call Image/Build/Profile/$(1),$(2))
-endef
-
-# $(1): filesystem type.
-define Image/Build
- $(call Image/Build/$(call rootfs_type,$(1)),$(1))
-endef
diff --git a/target/linux/ar71xx/image/lzma-loader/Makefile b/target/linux/ar71xx/image/lzma-loader/Makefile
deleted file mode 100644
index 738093a958..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/Makefile
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-# Copyright (C) 2011 OpenWrt.org
-# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-LZMA_TEXT_START := 0x80a00000
-LOADADDR := 0x80060000
-LOADER := loader.bin
-LOADER_NAME := $(basename $(notdir $(LOADER)))
-LOADER_DATA :=
-TARGET_DIR :=
-FLASH_OFFS :=
-FLASH_MAX :=
-BOARD :=
-
-ifeq ($(TARGET_DIR),)
-TARGET_DIR := $(KDIR)
-endif
-
-LOADER_BIN := $(TARGET_DIR)/$(LOADER_NAME).bin
-LOADER_GZ := $(TARGET_DIR)/$(LOADER_NAME).gz
-LOADER_ELF := $(TARGET_DIR)/$(LOADER_NAME).elf
-
-PKG_NAME := lzma-loader
-PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME)
-
-.PHONY : loader-compile loader.bin loader.elf loader.gz
-
-$(PKG_BUILD_DIR)/.prepared:
- mkdir $(PKG_BUILD_DIR)
- $(CP) ./src/* $(PKG_BUILD_DIR)/
- touch $@
-
-loader-compile: $(PKG_BUILD_DIR)/.prepared
- $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \
- LZMA_TEXT_START=$(LZMA_TEXT_START) \
- LOADADDR=$(LOADADDR) \
- LOADER_DATA=$(LOADER_DATA) \
- FLASH_OFFS=$(FLASH_OFFS) \
- FLASH_MAX=$(FLASH_MAX) \
- BOARD="$(BOARD)" \
- clean all
-
-loader.gz: $(PKG_BUILD_DIR)/loader.bin
- # Workaround for buggy bootloaders: Some devices
- # (TP-Link TL-WR1043ND v1) don't work correctly when
- # the uncompressed loader is too small (probably a cache
- # invalidation issue)
- dd if=$< bs=512K conv=sync | gzip -nc9 > $(LOADER_GZ)
-
-loader.elf: $(PKG_BUILD_DIR)/loader.elf
- $(CP) $< $(LOADER_ELF)
-
-loader.bin: $(PKG_BUILD_DIR)/loader.bin
- $(CP) $< $(LOADER_BIN)
-
-download:
-prepare: $(PKG_BUILD_DIR)/.prepared
-compile: loader-compile
-
-install:
-
-clean:
- rm -rf $(PKG_BUILD_DIR)
-
diff --git a/target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.c b/target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.c
deleted file mode 100644
index cb8345377e..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.c
+++ /dev/null
@@ -1,584 +0,0 @@
-/*
- LzmaDecode.c
- LZMA Decoder (optimized for Speed version)
-
- LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this Code, expressly permits you to
- statically or dynamically link your Code (or bind by name) to the
- interfaces of this file without subjecting your linked Code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#include "LzmaDecode.h"
-
-#define kNumTopBits 24
-#define kTopValue ((UInt32)1 << kNumTopBits)
-
-#define kNumBitModelTotalBits 11
-#define kBitModelTotal (1 << kNumBitModelTotalBits)
-#define kNumMoveBits 5
-
-#define RC_READ_BYTE (*Buffer++)
-
-#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
- { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
-
-#ifdef _LZMA_IN_CB
-
-#define RC_TEST { if (Buffer == BufferLim) \
- { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \
- BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }}
-
-#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
-
-#else
-
-#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; }
-
-#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
-
-#endif
-
-#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
-
-#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
-#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
-#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
-
-#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
- { UpdateBit0(p); mi <<= 1; A0; } else \
- { UpdateBit1(p); mi = (mi + mi) + 1; A1; }
-
-#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)
-
-#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
- { int i = numLevels; res = 1; \
- do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
- res -= (1 << numLevels); }
-
-
-#define kNumPosBitsMax 4
-#define kNumPosStatesMax (1 << kNumPosBitsMax)
-
-#define kLenNumLowBits 3
-#define kLenNumLowSymbols (1 << kLenNumLowBits)
-#define kLenNumMidBits 3
-#define kLenNumMidSymbols (1 << kLenNumMidBits)
-#define kLenNumHighBits 8
-#define kLenNumHighSymbols (1 << kLenNumHighBits)
-
-#define LenChoice 0
-#define LenChoice2 (LenChoice + 1)
-#define LenLow (LenChoice2 + 1)
-#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-
-
-#define kNumStates 12
-#define kNumLitStates 7
-
-#define kStartPosModelIndex 4
-#define kEndPosModelIndex 14
-#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-
-#define kNumPosSlotBits 6
-#define kNumLenToPosStates 4
-
-#define kNumAlignBits 4
-#define kAlignTableSize (1 << kNumAlignBits)
-
-#define kMatchMinLen 2
-
-#define IsMatch 0
-#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-#define IsRepG0 (IsRep + kNumStates)
-#define IsRepG1 (IsRepG0 + kNumStates)
-#define IsRepG2 (IsRepG1 + kNumStates)
-#define IsRep0Long (IsRepG2 + kNumStates)
-#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-#define LenCoder (Align + kAlignTableSize)
-#define RepLenCoder (LenCoder + kNumLenProbs)
-#define Literal (RepLenCoder + kNumLenProbs)
-
-#if Literal != LZMA_BASE_SIZE
-StopCompilingDueBUG
-#endif
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
-{
- unsigned char prop0;
- if (size < LZMA_PROPERTIES_SIZE)
- return LZMA_RESULT_DATA_ERROR;
- prop0 = propsData[0];
- if (prop0 >= (9 * 5 * 5))
- return LZMA_RESULT_DATA_ERROR;
- {
- for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
- for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
- propsRes->lc = prop0;
- /*
- unsigned char remainder = (unsigned char)(prop0 / 9);
- propsRes->lc = prop0 % 9;
- propsRes->pb = remainder / 5;
- propsRes->lp = remainder % 5;
- */
- }
-
- #ifdef _LZMA_OUT_READ
- {
- int i;
- propsRes->DictionarySize = 0;
- for (i = 0; i < 4; i++)
- propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
- if (propsRes->DictionarySize == 0)
- propsRes->DictionarySize = 1;
- }
- #endif
- return LZMA_RESULT_OK;
-}
-
-#define kLzmaStreamWasFinishedId (-1)
-
-int LzmaDecode(CLzmaDecoderState *vs,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *InCallback,
- #else
- const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
- #endif
- unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
-{
- CProb *p = vs->Probs;
- SizeT nowPos = 0;
- Byte previousByte = 0;
- UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
- UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
- int lc = vs->Properties.lc;
-
- #ifdef _LZMA_OUT_READ
-
- UInt32 Range = vs->Range;
- UInt32 Code = vs->Code;
- #ifdef _LZMA_IN_CB
- const Byte *Buffer = vs->Buffer;
- const Byte *BufferLim = vs->BufferLim;
- #else
- const Byte *Buffer = inStream;
- const Byte *BufferLim = inStream + inSize;
- #endif
- int state = vs->State;
- UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
- int len = vs->RemainLen;
- UInt32 globalPos = vs->GlobalPos;
- UInt32 distanceLimit = vs->DistanceLimit;
-
- Byte *dictionary = vs->Dictionary;
- UInt32 dictionarySize = vs->Properties.DictionarySize;
- UInt32 dictionaryPos = vs->DictionaryPos;
-
- Byte tempDictionary[4];
-
- #ifndef _LZMA_IN_CB
- *inSizeProcessed = 0;
- #endif
- *outSizeProcessed = 0;
- if (len == kLzmaStreamWasFinishedId)
- return LZMA_RESULT_OK;
-
- if (dictionarySize == 0)
- {
- dictionary = tempDictionary;
- dictionarySize = 1;
- tempDictionary[0] = vs->TempDictionary[0];
- }
-
- if (len == kLzmaNeedInitId)
- {
- {
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
- UInt32 i;
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- rep0 = rep1 = rep2 = rep3 = 1;
- state = 0;
- globalPos = 0;
- distanceLimit = 0;
- dictionaryPos = 0;
- dictionary[dictionarySize - 1] = 0;
- #ifdef _LZMA_IN_CB
- RC_INIT;
- #else
- RC_INIT(inStream, inSize);
- #endif
- }
- len = 0;
- }
- while(len != 0 && nowPos < outSize)
- {
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- len--;
- }
- if (dictionaryPos == 0)
- previousByte = dictionary[dictionarySize - 1];
- else
- previousByte = dictionary[dictionaryPos - 1];
-
- #else /* if !_LZMA_OUT_READ */
-
- int state = 0;
- UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
- int len = 0;
- const Byte *Buffer;
- const Byte *BufferLim;
- UInt32 Range;
- UInt32 Code;
-
- #ifndef _LZMA_IN_CB
- *inSizeProcessed = 0;
- #endif
- *outSizeProcessed = 0;
-
- {
- UInt32 i;
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- }
-
- #ifdef _LZMA_IN_CB
- RC_INIT;
- #else
- RC_INIT(inStream, inSize);
- #endif
-
- #endif /* _LZMA_OUT_READ */
-
- while(nowPos < outSize)
- {
- CProb *prob;
- UInt32 bound;
- int posState = (int)(
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & posStateMask);
-
- prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
- IfBit0(prob)
- {
- int symbol = 1;
- UpdateBit0(prob)
- prob = p + Literal + (LZMA_LIT_SIZE *
- (((
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-
- if (state >= kNumLitStates)
- {
- int matchByte;
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- matchByte = dictionary[pos];
- #else
- matchByte = outStream[nowPos - rep0];
- #endif
- do
- {
- int bit;
- CProb *probLit;
- matchByte <<= 1;
- bit = (matchByte & 0x100);
- probLit = prob + 0x100 + bit + symbol;
- RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
- }
- while (symbol < 0x100);
- }
- while (symbol < 0x100)
- {
- CProb *probLit = prob + symbol;
- RC_GET_BIT(probLit, symbol)
- }
- previousByte = (Byte)symbol;
-
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- if (distanceLimit < dictionarySize)
- distanceLimit++;
-
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #endif
- if (state < 4) state = 0;
- else if (state < 10) state -= 3;
- else state -= 6;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRep + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- rep3 = rep2;
- rep2 = rep1;
- rep1 = rep0;
- state = state < kNumLitStates ? 0 : 3;
- prob = p + LenCoder;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRepG0 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
- IfBit0(prob)
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos;
- #endif
- UpdateBit0(prob);
-
- #ifdef _LZMA_OUT_READ
- if (distanceLimit == 0)
- #else
- if (nowPos == 0)
- #endif
- return LZMA_RESULT_DATA_ERROR;
-
- state = state < kNumLitStates ? 9 : 11;
- #ifdef _LZMA_OUT_READ
- pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- if (distanceLimit < dictionarySize)
- distanceLimit++;
- #endif
-
- continue;
- }
- else
- {
- UpdateBit1(prob);
- }
- }
- else
- {
- UInt32 distance;
- UpdateBit1(prob);
- prob = p + IsRepG1 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- distance = rep1;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRepG2 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- distance = rep2;
- }
- else
- {
- UpdateBit1(prob);
- distance = rep3;
- rep3 = rep2;
- }
- rep2 = rep1;
- }
- rep1 = rep0;
- rep0 = distance;
- }
- state = state < kNumLitStates ? 8 : 11;
- prob = p + RepLenCoder;
- }
- {
- int numBits, offset;
- CProb *probLen = prob + LenChoice;
- IfBit0(probLen)
- {
- UpdateBit0(probLen);
- probLen = prob + LenLow + (posState << kLenNumLowBits);
- offset = 0;
- numBits = kLenNumLowBits;
- }
- else
- {
- UpdateBit1(probLen);
- probLen = prob + LenChoice2;
- IfBit0(probLen)
- {
- UpdateBit0(probLen);
- probLen = prob + LenMid + (posState << kLenNumMidBits);
- offset = kLenNumLowSymbols;
- numBits = kLenNumMidBits;
- }
- else
- {
- UpdateBit1(probLen);
- probLen = prob + LenHigh;
- offset = kLenNumLowSymbols + kLenNumMidSymbols;
- numBits = kLenNumHighBits;
- }
- }
- RangeDecoderBitTreeDecode(probLen, numBits, len);
- len += offset;
- }
-
- if (state < 4)
- {
- int posSlot;
- state += kNumLitStates;
- prob = p + PosSlot +
- ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
- kNumPosSlotBits);
- RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
- if (posSlot >= kStartPosModelIndex)
- {
- int numDirectBits = ((posSlot >> 1) - 1);
- rep0 = (2 | ((UInt32)posSlot & 1));
- if (posSlot < kEndPosModelIndex)
- {
- rep0 <<= numDirectBits;
- prob = p + SpecPos + rep0 - posSlot - 1;
- }
- else
- {
- numDirectBits -= kNumAlignBits;
- do
- {
- RC_NORMALIZE
- Range >>= 1;
- rep0 <<= 1;
- if (Code >= Range)
- {
- Code -= Range;
- rep0 |= 1;
- }
- }
- while (--numDirectBits != 0);
- prob = p + Align;
- rep0 <<= kNumAlignBits;
- numDirectBits = kNumAlignBits;
- }
- {
- int i = 1;
- int mi = 1;
- do
- {
- CProb *prob3 = prob + mi;
- RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
- i <<= 1;
- }
- while(--numDirectBits != 0);
- }
- }
- else
- rep0 = posSlot;
- if (++rep0 == (UInt32)(0))
- {
- /* it's for stream version */
- len = kLzmaStreamWasFinishedId;
- break;
- }
- }
-
- len += kMatchMinLen;
- #ifdef _LZMA_OUT_READ
- if (rep0 > distanceLimit)
- #else
- if (rep0 > nowPos)
- #endif
- return LZMA_RESULT_DATA_ERROR;
-
- #ifdef _LZMA_OUT_READ
- if (dictionarySize - distanceLimit > (UInt32)len)
- distanceLimit += len;
- else
- distanceLimit = dictionarySize;
- #endif
-
- do
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- len--;
- outStream[nowPos++] = previousByte;
- }
- while(len != 0 && nowPos < outSize);
- }
- }
- RC_NORMALIZE;
-
- #ifdef _LZMA_OUT_READ
- vs->Range = Range;
- vs->Code = Code;
- vs->DictionaryPos = dictionaryPos;
- vs->GlobalPos = globalPos + (UInt32)nowPos;
- vs->DistanceLimit = distanceLimit;
- vs->Reps[0] = rep0;
- vs->Reps[1] = rep1;
- vs->Reps[2] = rep2;
- vs->Reps[3] = rep3;
- vs->State = state;
- vs->RemainLen = len;
- vs->TempDictionary[0] = tempDictionary[0];
- #endif
-
- #ifdef _LZMA_IN_CB
- vs->Buffer = Buffer;
- vs->BufferLim = BufferLim;
- #else
- *inSizeProcessed = (SizeT)(Buffer - inStream);
- #endif
- *outSizeProcessed = nowPos;
- return LZMA_RESULT_OK;
-}
diff --git a/target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.h b/target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.h
deleted file mode 100644
index 2870eeb9c9..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/LzmaDecode.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- LzmaDecode.h
- LZMA Decoder interface
-
- LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this code, expressly permits you to
- statically or dynamically link your code (or bind by name) to the
- interfaces of this file without subjecting your linked code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#ifndef __LZMADECODE_H
-#define __LZMADECODE_H
-
-#include "LzmaTypes.h"
-
-/* #define _LZMA_IN_CB */
-/* Use callback for input data */
-
-/* #define _LZMA_OUT_READ */
-/* Use read function for output data */
-
-/* #define _LZMA_PROB32 */
-/* It can increase speed on some 32-bit CPUs,
- but memory usage will be doubled in that case */
-
-/* #define _LZMA_LOC_OPT */
-/* Enable local speed optimizations inside code */
-
-#ifdef _LZMA_PROB32
-#define CProb UInt32
-#else
-#define CProb UInt16
-#endif
-
-#define LZMA_RESULT_OK 0
-#define LZMA_RESULT_DATA_ERROR 1
-
-#ifdef _LZMA_IN_CB
-typedef struct _ILzmaInCallback
-{
- int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
-} ILzmaInCallback;
-#endif
-
-#define LZMA_BASE_SIZE 1846
-#define LZMA_LIT_SIZE 768
-
-#define LZMA_PROPERTIES_SIZE 5
-
-typedef struct _CLzmaProperties
-{
- int lc;
- int lp;
- int pb;
- #ifdef _LZMA_OUT_READ
- UInt32 DictionarySize;
- #endif
-}CLzmaProperties;
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
-
-#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
-
-#define kLzmaNeedInitId (-2)
-
-typedef struct _CLzmaDecoderState
-{
- CLzmaProperties Properties;
- CProb *Probs;
-
- #ifdef _LZMA_IN_CB
- const unsigned char *Buffer;
- const unsigned char *BufferLim;
- #endif
-
- #ifdef _LZMA_OUT_READ
- unsigned char *Dictionary;
- UInt32 Range;
- UInt32 Code;
- UInt32 DictionaryPos;
- UInt32 GlobalPos;
- UInt32 DistanceLimit;
- UInt32 Reps[4];
- int State;
- int RemainLen;
- unsigned char TempDictionary[4];
- #endif
-} CLzmaDecoderState;
-
-#ifdef _LZMA_OUT_READ
-#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
-#endif
-
-int LzmaDecode(CLzmaDecoderState *vs,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback,
- #else
- const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
- #endif
- unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
-
-#endif
diff --git a/target/linux/ar71xx/image/lzma-loader/src/LzmaTypes.h b/target/linux/ar71xx/image/lzma-loader/src/LzmaTypes.h
deleted file mode 100644
index 9c27290757..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/LzmaTypes.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
-LzmaTypes.h
-
-Types for LZMA Decoder
-
-This file written and distributed to public domain by Igor Pavlov.
-This file is part of LZMA SDK 4.40 (2006-05-01)
-*/
-
-#ifndef __LZMATYPES_H
-#define __LZMATYPES_H
-
-#ifndef _7ZIP_BYTE_DEFINED
-#define _7ZIP_BYTE_DEFINED
-typedef unsigned char Byte;
-#endif
-
-#ifndef _7ZIP_UINT16_DEFINED
-#define _7ZIP_UINT16_DEFINED
-typedef unsigned short UInt16;
-#endif
-
-#ifndef _7ZIP_UINT32_DEFINED
-#define _7ZIP_UINT32_DEFINED
-#ifdef _LZMA_UINT32_IS_ULONG
-typedef unsigned long UInt32;
-#else
-typedef unsigned int UInt32;
-#endif
-#endif
-
-/* #define _LZMA_NO_SYSTEM_SIZE_T */
-/* You can use it, if you don't want <stddef.h> */
-
-#ifndef _7ZIP_SIZET_DEFINED
-#define _7ZIP_SIZET_DEFINED
-#ifdef _LZMA_NO_SYSTEM_SIZE_T
-typedef UInt32 SizeT;
-#else
-#include <stddef.h>
-typedef size_t SizeT;
-#endif
-#endif
-
-#endif
diff --git a/target/linux/ar71xx/image/lzma-loader/src/Makefile b/target/linux/ar71xx/image/lzma-loader/src/Makefile
deleted file mode 100644
index 7773f027a2..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/Makefile
+++ /dev/null
@@ -1,108 +0,0 @@
-#
-# Makefile for the LZMA compressed kernel loader for
-# Atheros AR7XXX/AR9XXX based boards
-#
-# Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-#
-# Some parts of this file was based on the OpenWrt specific lzma-loader
-# for the BCM47xx and ADM5120 based boards:
-# Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
-# Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com>
-# Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License version 2 as published
-# by the Free Software Foundation.
-#
-
-LOADADDR :=
-LZMA_TEXT_START := 0x80a00000
-LOADER_DATA :=
-BOARD :=
-FLASH_OFFS :=
-FLASH_MAX :=
-
-CC := $(CROSS_COMPILE)gcc
-LD := $(CROSS_COMPILE)ld
-OBJCOPY := $(CROSS_COMPILE)objcopy
-OBJDUMP := $(CROSS_COMPILE)objdump
-
-BIN_FLAGS := -O binary -R .reginfo -R .note -R .comment -R .mdebug \
- -R .MIPS.abiflags -S
-
-CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \
- -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \
- -mno-abicalls -fno-pic -ffunction-sections -pipe -mlong-calls \
- -fno-common -ffreestanding -fhonour-copts -nostartfiles \
- -mabi=32 -march=mips32r2 \
- -Wa,-32 -Wa,-march=mips32r2 -Wa,-mips32r2 -Wa,--trap
-CFLAGS += -D_LZMA_PROB32
-CFLAGS += -flto
-
-ASFLAGS = $(CFLAGS) -D__ASSEMBLY__
-
-LDFLAGS = -static -Wl,--gc-sections -Wl,-no-warn-mismatch
-LDFLAGS += -Wl,-e,startup -T loader.lds -Wl,-Ttext,$(LZMA_TEXT_START)
-LDFLAGS += -flto -fwhole-program
-
-O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32)
-
-OBJECTS := head.o loader.o cache.o board.o printf.o LzmaDecode.o
-
-ifneq ($(strip $(LOADER_DATA)),)
-OBJECTS += data.o
-CFLAGS += -DLZMA_WRAPPER=1 -DLOADADDR=$(LOADADDR)
-endif
-
-ifneq ($(strip $(KERNEL_CMDLINE)),)
-CFLAGS += -DCONFIG_KERNEL_CMDLINE='"$(KERNEL_CMDLINE)"'
-endif
-
-ifneq ($(strip $(FLASH_OFFS)),)
-CFLAGS += -DCONFIG_FLASH_OFFS=$(FLASH_OFFS)
-endif
-
-ifneq ($(strip $(FLASH_MAX)),)
-CFLAGS += -DCONFIG_FLASH_MAX=$(FLASH_MAX)
-endif
-
-BOARD_DEF := $(shell echo $(strip $(BOARD)) | tr a-z A-Z | tr - _)
-ifneq ($(BOARD_DEF),)
-CFLAGS += -DCONFIG_BOARD_$(BOARD_DEF)
-endif
-
-all: loader.elf
-
-# Don't build dependencies, this may die if $(CC) isn't gcc
-dep:
-
-install:
-
-%.o : %.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-%.o : %.S
- $(CC) $(ASFLAGS) -c -o $@ $<
-
-data.o: $(LOADER_DATA)
- $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $<
-
-loader: $(OBJECTS)
- $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $(OBJECTS)
-
-loader.bin: loader
- $(OBJCOPY) $(BIN_FLAGS) $< $@
-
-loader2.o: loader.bin
- $(LD) -r -b binary --oformat $(O_FORMAT) -o $@ $<
-
-loader.elf: loader2.o
- $(LD) -z max-page-size=0x1000 -e startup -T loader2.lds -Ttext $(LOADADDR) -o $@ $<
-
-mrproper: clean
-
-clean:
- rm -f loader *.elf *.bin *.o
-
-
-
diff --git a/target/linux/ar71xx/image/lzma-loader/src/ar71xx_regs.h b/target/linux/ar71xx/image/lzma-loader/src/ar71xx_regs.h
deleted file mode 100644
index 19a4785bb4..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/ar71xx_regs.h
+++ /dev/null
@@ -1,725 +0,0 @@
-/*
- * Atheros AR71XX/AR724X/AR913X SoC register definitions
- *
- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
- *
- * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_AR71XX_REGS_H
-#define __ASM_MACH_AR71XX_REGS_H
-
-#define BIT(_x) (1UL << (_x))
-
-#define AR71XX_APB_BASE 0x18000000
-#define AR71XX_GE0_BASE 0x19000000
-#define AR71XX_GE0_SIZE 0x10000
-#define AR71XX_GE1_BASE 0x1a000000
-#define AR71XX_GE1_SIZE 0x10000
-#define AR71XX_EHCI_BASE 0x1b000000
-#define AR71XX_EHCI_SIZE 0x1000
-#define AR71XX_OHCI_BASE 0x1c000000
-#define AR71XX_OHCI_SIZE 0x1000
-#define AR71XX_SPI_BASE 0x1f000000
-#define AR71XX_SPI_SIZE 0x01000000
-
-#define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000)
-#define AR71XX_DDR_CTRL_SIZE 0x100
-#define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000)
-#define AR71XX_UART_SIZE 0x100
-#define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
-#define AR71XX_USB_CTRL_SIZE 0x100
-#define AR71XX_GPIO_BASE (AR71XX_APB_BASE + 0x00040000)
-#define AR71XX_GPIO_SIZE 0x100
-#define AR71XX_PLL_BASE (AR71XX_APB_BASE + 0x00050000)
-#define AR71XX_PLL_SIZE 0x100
-#define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
-#define AR71XX_RESET_SIZE 0x100
-#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000)
-#define AR71XX_MII_SIZE 0x100
-
-#define AR71XX_PCI_MEM_BASE 0x10000000
-#define AR71XX_PCI_MEM_SIZE 0x07000000
-
-#define AR71XX_PCI_WIN0_OFFS 0x10000000
-#define AR71XX_PCI_WIN1_OFFS 0x11000000
-#define AR71XX_PCI_WIN2_OFFS 0x12000000
-#define AR71XX_PCI_WIN3_OFFS 0x13000000
-#define AR71XX_PCI_WIN4_OFFS 0x14000000
-#define AR71XX_PCI_WIN5_OFFS 0x15000000
-#define AR71XX_PCI_WIN6_OFFS 0x16000000
-#define AR71XX_PCI_WIN7_OFFS 0x07000000
-
-#define AR71XX_PCI_CFG_BASE \
- (AR71XX_PCI_MEM_BASE + AR71XX_PCI_WIN7_OFFS + 0x10000)
-#define AR71XX_PCI_CFG_SIZE 0x100
-
-#define AR7240_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
-#define AR7240_USB_CTRL_SIZE 0x100
-#define AR7240_OHCI_BASE 0x1b000000
-#define AR7240_OHCI_SIZE 0x1000
-
-#define AR724X_PCI_MEM_BASE 0x10000000
-#define AR724X_PCI_MEM_SIZE 0x04000000
-
-#define AR724X_PCI_CFG_BASE 0x14000000
-#define AR724X_PCI_CFG_SIZE 0x1000
-#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000c0000)
-#define AR724X_PCI_CRP_SIZE 0x1000
-#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000f0000)
-#define AR724X_PCI_CTRL_SIZE 0x100
-
-#define AR724X_EHCI_BASE 0x1b000000
-#define AR724X_EHCI_SIZE 0x1000
-
-#define AR913X_EHCI_BASE 0x1b000000
-#define AR913X_EHCI_SIZE 0x1000
-#define AR913X_WMAC_BASE (AR71XX_APB_BASE + 0x000C0000)
-#define AR913X_WMAC_SIZE 0x30000
-
-#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
-#define AR933X_UART_SIZE 0x14
-#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-#define AR933X_GMAC_SIZE 0x04
-#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-#define AR933X_WMAC_SIZE 0x20000
-#define AR933X_EHCI_BASE 0x1b000000
-#define AR933X_EHCI_SIZE 0x1000
-
-#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-#define AR934X_GMAC_SIZE 0x14
-#define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-#define AR934X_WMAC_SIZE 0x20000
-#define AR934X_EHCI_BASE 0x1b000000
-#define AR934X_EHCI_SIZE 0x200
-
-#define QCA955X_PCI_MEM_BASE0 0x10000000
-#define QCA955X_PCI_MEM_BASE1 0x12000000
-#define QCA955X_PCI_MEM_SIZE 0x02000000
-#define QCA955X_PCI_CFG_BASE0 0x14000000
-#define QCA955X_PCI_CFG_BASE1 0x16000000
-#define QCA955X_PCI_CFG_SIZE 0x1000
-#define QCA955X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000)
-#define QCA955X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000)
-#define QCA955X_PCI_CRP_SIZE 0x1000
-#define QCA955X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000)
-#define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000)
-#define QCA955X_PCI_CTRL_SIZE 0x100
-
-#define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-#define QCA955X_WMAC_SIZE 0x20000
-#define QCA955X_EHCI0_BASE 0x1b000000
-#define QCA955X_EHCI1_BASE 0x1b400000
-#define QCA955X_EHCI_SIZE 0x1000
-#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-#define QCA955X_GMAC_SIZE 0x40
-
-#define AR9300_OTP_BASE 0x14000
-#define AR9300_OTP_STATUS 0x15f18
-#define AR9300_OTP_STATUS_TYPE 0x7
-#define AR9300_OTP_STATUS_VALID 0x4
-#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
-#define AR9300_OTP_STATUS_SM_BUSY 0x1
-#define AR9300_OTP_READ_DATA 0x15f1c
-
-/*
- * DDR_CTRL block
- */
-#define AR71XX_DDR_REG_PCI_WIN0 0x7c
-#define AR71XX_DDR_REG_PCI_WIN1 0x80
-#define AR71XX_DDR_REG_PCI_WIN2 0x84
-#define AR71XX_DDR_REG_PCI_WIN3 0x88
-#define AR71XX_DDR_REG_PCI_WIN4 0x8c
-#define AR71XX_DDR_REG_PCI_WIN5 0x90
-#define AR71XX_DDR_REG_PCI_WIN6 0x94
-#define AR71XX_DDR_REG_PCI_WIN7 0x98
-#define AR71XX_DDR_REG_FLUSH_GE0 0x9c
-#define AR71XX_DDR_REG_FLUSH_GE1 0xa0
-#define AR71XX_DDR_REG_FLUSH_USB 0xa4
-#define AR71XX_DDR_REG_FLUSH_PCI 0xa8
-
-#define AR724X_DDR_REG_FLUSH_GE0 0x7c
-#define AR724X_DDR_REG_FLUSH_GE1 0x80
-#define AR724X_DDR_REG_FLUSH_USB 0x84
-#define AR724X_DDR_REG_FLUSH_PCIE 0x88
-
-#define AR913X_DDR_REG_FLUSH_GE0 0x7c
-#define AR913X_DDR_REG_FLUSH_GE1 0x80
-#define AR913X_DDR_REG_FLUSH_USB 0x84
-#define AR913X_DDR_REG_FLUSH_WMAC 0x88
-
-#define AR933X_DDR_REG_FLUSH_GE0 0x7c
-#define AR933X_DDR_REG_FLUSH_GE1 0x80
-#define AR933X_DDR_REG_FLUSH_USB 0x84
-#define AR933X_DDR_REG_FLUSH_WMAC 0x88
-
-#define AR934X_DDR_REG_FLUSH_GE0 0x9c
-#define AR934X_DDR_REG_FLUSH_GE1 0xa0
-#define AR934X_DDR_REG_FLUSH_USB 0xa4
-#define AR934X_DDR_REG_FLUSH_PCIE 0xa8
-#define AR934X_DDR_REG_FLUSH_WMAC 0xac
-
-/*
- * PLL block
- */
-#define AR71XX_PLL_REG_CPU_CONFIG 0x00
-#define AR71XX_PLL_REG_SEC_CONFIG 0x04
-#define AR71XX_PLL_REG_ETH0_INT_CLOCK 0x10
-#define AR71XX_PLL_REG_ETH1_INT_CLOCK 0x14
-
-#define AR71XX_PLL_DIV_SHIFT 3
-#define AR71XX_PLL_DIV_MASK 0x1f
-#define AR71XX_CPU_DIV_SHIFT 16
-#define AR71XX_CPU_DIV_MASK 0x3
-#define AR71XX_DDR_DIV_SHIFT 18
-#define AR71XX_DDR_DIV_MASK 0x3
-#define AR71XX_AHB_DIV_SHIFT 20
-#define AR71XX_AHB_DIV_MASK 0x7
-
-#define AR71XX_ETH0_PLL_SHIFT 17
-#define AR71XX_ETH1_PLL_SHIFT 19
-
-#define AR724X_PLL_REG_CPU_CONFIG 0x00
-#define AR724X_PLL_REG_PCIE_CONFIG 0x18
-
-#define AR724X_PLL_DIV_SHIFT 0
-#define AR724X_PLL_DIV_MASK 0x3ff
-#define AR724X_PLL_REF_DIV_SHIFT 10
-#define AR724X_PLL_REF_DIV_MASK 0xf
-#define AR724X_AHB_DIV_SHIFT 19
-#define AR724X_AHB_DIV_MASK 0x1
-#define AR724X_DDR_DIV_SHIFT 22
-#define AR724X_DDR_DIV_MASK 0x3
-
-#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
-
-#define AR913X_PLL_REG_CPU_CONFIG 0x00
-#define AR913X_PLL_REG_ETH_CONFIG 0x04
-#define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
-#define AR913X_PLL_REG_ETH1_INT_CLOCK 0x18
-
-#define AR913X_PLL_DIV_SHIFT 0
-#define AR913X_PLL_DIV_MASK 0x3ff
-#define AR913X_DDR_DIV_SHIFT 22
-#define AR913X_DDR_DIV_MASK 0x3
-#define AR913X_AHB_DIV_SHIFT 19
-#define AR913X_AHB_DIV_MASK 0x1
-
-#define AR913X_ETH0_PLL_SHIFT 20
-#define AR913X_ETH1_PLL_SHIFT 22
-
-#define AR933X_PLL_CPU_CONFIG_REG 0x00
-#define AR933X_PLL_CLOCK_CTRL_REG 0x08
-
-#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10
-#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f
-#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16
-#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23
-#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7
-
-#define AR933X_PLL_CLOCK_CTRL_BYPASS BIT(2)
-#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5
-#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3
-#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10
-#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3
-#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15
-#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7
-
-#define AR934X_PLL_CPU_CONFIG_REG 0x00
-#define AR934X_PLL_DDR_CONFIG_REG 0x04
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
-#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c
-
-#define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
-#define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-#define AR934X_PLL_CPU_CONFIG_NINT_SHIFT 6
-#define AR934X_PLL_CPU_CONFIG_NINT_MASK 0x3f
-#define AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
-#define AR934X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-#define AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
-#define AR934X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
-
-#define AR934X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
-#define AR934X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
-#define AR934X_PLL_DDR_CONFIG_NINT_SHIFT 10
-#define AR934X_PLL_DDR_CONFIG_NINT_MASK 0x3f
-#define AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
-#define AR934X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
-#define AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
-#define AR934X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
-
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT 5
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_SHIFT 10
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_SHIFT 15
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
-#define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-#define QCA955X_PLL_CPU_CONFIG_REG 0x00
-#define QCA955X_PLL_DDR_CONFIG_REG 0x04
-#define QCA955X_PLL_CLK_CTRL_REG 0x08
-
-#define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
-#define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-#define QCA955X_PLL_CPU_CONFIG_NINT_SHIFT 6
-#define QCA955X_PLL_CPU_CONFIG_NINT_MASK 0x3f
-#define QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
-#define QCA955X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-#define QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
-#define QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK 0x3
-
-#define QCA955X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
-#define QCA955X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
-#define QCA955X_PLL_DDR_CONFIG_NINT_SHIFT 10
-#define QCA955X_PLL_DDR_CONFIG_NINT_MASK 0x3f
-#define QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
-#define QCA955X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
-#define QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
-#define QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
-
-#define QCA955X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
-#define QCA955X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
-#define QCA955X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
-#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5
-#define QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
-#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10
-#define QCA955X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
-#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15
-#define QCA955X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
-#define QCA955X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
-#define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
-#define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-/*
- * USB_CONFIG block
- */
-#define AR71XX_USB_CTRL_REG_FLADJ 0x00
-#define AR71XX_USB_CTRL_REG_CONFIG 0x04
-
-/*
- * RESET block
- */
-#define AR71XX_RESET_REG_TIMER 0x00
-#define AR71XX_RESET_REG_TIMER_RELOAD 0x04
-#define AR71XX_RESET_REG_WDOG_CTRL 0x08
-#define AR71XX_RESET_REG_WDOG 0x0c
-#define AR71XX_RESET_REG_MISC_INT_STATUS 0x10
-#define AR71XX_RESET_REG_MISC_INT_ENABLE 0x14
-#define AR71XX_RESET_REG_PCI_INT_STATUS 0x18
-#define AR71XX_RESET_REG_PCI_INT_ENABLE 0x1c
-#define AR71XX_RESET_REG_GLOBAL_INT_STATUS 0x20
-#define AR71XX_RESET_REG_RESET_MODULE 0x24
-#define AR71XX_RESET_REG_PERFC_CTRL 0x2c
-#define AR71XX_RESET_REG_PERFC0 0x30
-#define AR71XX_RESET_REG_PERFC1 0x34
-#define AR71XX_RESET_REG_REV_ID 0x90
-
-#define AR913X_RESET_REG_GLOBAL_INT_STATUS 0x18
-#define AR913X_RESET_REG_RESET_MODULE 0x1c
-#define AR913X_RESET_REG_PERF_CTRL 0x20
-#define AR913X_RESET_REG_PERFC0 0x24
-#define AR913X_RESET_REG_PERFC1 0x28
-
-#define AR724X_RESET_REG_RESET_MODULE 0x1c
-
-#define AR933X_RESET_REG_RESET_MODULE 0x1c
-#define AR933X_RESET_REG_BOOTSTRAP 0xac
-
-#define AR934X_RESET_REG_RESET_MODULE 0x1c
-#define AR934X_RESET_REG_BOOTSTRAP 0xb0
-#define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-
-#define QCA955X_RESET_REG_BOOTSTRAP 0xb0
-#define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
-
-#define MISC_INT_ETHSW BIT(12)
-#define MISC_INT_TIMER4 BIT(10)
-#define MISC_INT_TIMER3 BIT(9)
-#define MISC_INT_TIMER2 BIT(8)
-#define MISC_INT_DMA BIT(7)
-#define MISC_INT_OHCI BIT(6)
-#define MISC_INT_PERFC BIT(5)
-#define MISC_INT_WDOG BIT(4)
-#define MISC_INT_UART BIT(3)
-#define MISC_INT_GPIO BIT(2)
-#define MISC_INT_ERROR BIT(1)
-#define MISC_INT_TIMER BIT(0)
-
-#define AR71XX_RESET_EXTERNAL BIT(28)
-#define AR71XX_RESET_FULL_CHIP BIT(24)
-#define AR71XX_RESET_CPU_NMI BIT(21)
-#define AR71XX_RESET_CPU_COLD BIT(20)
-#define AR71XX_RESET_DMA BIT(19)
-#define AR71XX_RESET_SLIC BIT(18)
-#define AR71XX_RESET_STEREO BIT(17)
-#define AR71XX_RESET_DDR BIT(16)
-#define AR71XX_RESET_GE1_MAC BIT(13)
-#define AR71XX_RESET_GE1_PHY BIT(12)
-#define AR71XX_RESET_USBSUS_OVERRIDE BIT(10)
-#define AR71XX_RESET_GE0_MAC BIT(9)
-#define AR71XX_RESET_GE0_PHY BIT(8)
-#define AR71XX_RESET_USB_OHCI_DLL BIT(6)
-#define AR71XX_RESET_USB_HOST BIT(5)
-#define AR71XX_RESET_USB_PHY BIT(4)
-#define AR71XX_RESET_PCI_BUS BIT(1)
-#define AR71XX_RESET_PCI_CORE BIT(0)
-
-#define AR7240_RESET_USB_HOST BIT(5)
-#define AR7240_RESET_OHCI_DLL BIT(3)
-
-#define AR724X_RESET_GE1_MDIO BIT(23)
-#define AR724X_RESET_GE0_MDIO BIT(22)
-#define AR724X_RESET_PCIE_PHY_SERIAL BIT(10)
-#define AR724X_RESET_PCIE_PHY BIT(7)
-#define AR724X_RESET_PCIE BIT(6)
-#define AR724X_RESET_USB_HOST BIT(5)
-#define AR724X_RESET_USB_PHY BIT(4)
-#define AR724X_RESET_USBSUS_OVERRIDE BIT(3)
-
-#define AR913X_RESET_AMBA2WMAC BIT(22)
-#define AR913X_RESET_USBSUS_OVERRIDE BIT(10)
-#define AR913X_RESET_USB_HOST BIT(5)
-#define AR913X_RESET_USB_PHY BIT(4)
-
-#define AR933X_RESET_GE1_MDIO BIT(23)
-#define AR933X_RESET_GE0_MDIO BIT(22)
-#define AR933X_RESET_GE1_MAC BIT(13)
-#define AR933X_RESET_WMAC BIT(11)
-#define AR933X_RESET_GE0_MAC BIT(9)
-#define AR933X_RESET_USB_HOST BIT(5)
-#define AR933X_RESET_USB_PHY BIT(4)
-#define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
-
-#define AR934X_RESET_HOST BIT(31)
-#define AR934X_RESET_SLIC BIT(30)
-#define AR934X_RESET_HDMA BIT(29)
-#define AR934X_RESET_EXTERNAL BIT(28)
-#define AR934X_RESET_RTC BIT(27)
-#define AR934X_RESET_PCIE_EP_INT BIT(26)
-#define AR934X_RESET_CHKSUM_ACC BIT(25)
-#define AR934X_RESET_FULL_CHIP BIT(24)
-#define AR934X_RESET_GE1_MDIO BIT(23)
-#define AR934X_RESET_GE0_MDIO BIT(22)
-#define AR934X_RESET_CPU_NMI BIT(21)
-#define AR934X_RESET_CPU_COLD BIT(20)
-#define AR934X_RESET_HOST_RESET_INT BIT(19)
-#define AR934X_RESET_PCIE_EP BIT(18)
-#define AR934X_RESET_UART1 BIT(17)
-#define AR934X_RESET_DDR BIT(16)
-#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-#define AR934X_RESET_NANDF BIT(14)
-#define AR934X_RESET_GE1_MAC BIT(13)
-#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12)
-#define AR934X_RESET_USB_PHY_ANALOG BIT(11)
-#define AR934X_RESET_HOST_DMA_INT BIT(10)
-#define AR934X_RESET_GE0_MAC BIT(9)
-#define AR934X_RESET_ETH_SWITCH BIT(8)
-#define AR934X_RESET_PCIE_PHY BIT(7)
-#define AR934X_RESET_PCIE BIT(6)
-#define AR934X_RESET_USB_HOST BIT(5)
-#define AR934X_RESET_USB_PHY BIT(4)
-#define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
-#define AR934X_RESET_LUT BIT(2)
-#define AR934X_RESET_MBOX BIT(1)
-#define AR934X_RESET_I2S BIT(0)
-
-#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
-#define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
-#define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
-
-#define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
-#define AR934X_BOOTSTRAP_SW_OPTION7 BIT(22)
-#define AR934X_BOOTSTRAP_SW_OPTION6 BIT(21)
-#define AR934X_BOOTSTRAP_SW_OPTION5 BIT(20)
-#define AR934X_BOOTSTRAP_SW_OPTION4 BIT(19)
-#define AR934X_BOOTSTRAP_SW_OPTION3 BIT(18)
-#define AR934X_BOOTSTRAP_SW_OPTION2 BIT(17)
-#define AR934X_BOOTSTRAP_SW_OPTION1 BIT(16)
-#define AR934X_BOOTSTRAP_USB_MODE_DEVICE BIT(7)
-#define AR934X_BOOTSTRAP_PCIE_RC BIT(6)
-#define AR934X_BOOTSTRAP_EJTAG_MODE BIT(5)
-#define AR934X_BOOTSTRAP_REF_CLK_40 BIT(4)
-#define AR934X_BOOTSTRAP_BOOT_FROM_SPI BIT(2)
-#define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
-#define AR934X_BOOTSTRAP_DDR1 BIT(0)
-
-#define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
-
-#define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
-#define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
-#define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
-#define AR934X_PCIE_WMAC_INT_WMAC_RXHP BIT(3)
-#define AR934X_PCIE_WMAC_INT_PCIE_RC BIT(4)
-#define AR934X_PCIE_WMAC_INT_PCIE_RC0 BIT(5)
-#define AR934X_PCIE_WMAC_INT_PCIE_RC1 BIT(6)
-#define AR934X_PCIE_WMAC_INT_PCIE_RC2 BIT(7)
-#define AR934X_PCIE_WMAC_INT_PCIE_RC3 BIT(8)
-#define AR934X_PCIE_WMAC_INT_WMAC_ALL \
- (AR934X_PCIE_WMAC_INT_WMAC_MISC | AR934X_PCIE_WMAC_INT_WMAC_TX | \
- AR934X_PCIE_WMAC_INT_WMAC_RXLP | AR934X_PCIE_WMAC_INT_WMAC_RXHP)
-
-#define AR934X_PCIE_WMAC_INT_PCIE_ALL \
- (AR934X_PCIE_WMAC_INT_PCIE_RC | AR934X_PCIE_WMAC_INT_PCIE_RC0 | \
- AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
- AR934X_PCIE_WMAC_INT_PCIE_RC3)
-
-#define QCA955X_EXT_INT_WMAC_MISC BIT(0)
-#define QCA955X_EXT_INT_WMAC_TX BIT(1)
-#define QCA955X_EXT_INT_WMAC_RXLP BIT(2)
-#define QCA955X_EXT_INT_WMAC_RXHP BIT(3)
-#define QCA955X_EXT_INT_PCIE_RC1 BIT(4)
-#define QCA955X_EXT_INT_PCIE_RC1_INT0 BIT(5)
-#define QCA955X_EXT_INT_PCIE_RC1_INT1 BIT(6)
-#define QCA955X_EXT_INT_PCIE_RC1_INT2 BIT(7)
-#define QCA955X_EXT_INT_PCIE_RC1_INT3 BIT(8)
-#define QCA955X_EXT_INT_PCIE_RC2 BIT(12)
-#define QCA955X_EXT_INT_PCIE_RC2_INT0 BIT(13)
-#define QCA955X_EXT_INT_PCIE_RC2_INT1 BIT(14)
-#define QCA955X_EXT_INT_PCIE_RC2_INT2 BIT(15)
-#define QCA955X_EXT_INT_PCIE_RC2_INT3 BIT(16)
-#define QCA955X_EXT_INT_USB1 BIT(24)
-#define QCA955X_EXT_INT_USB2 BIT(28)
-
-#define QCA955X_EXT_INT_WMAC_ALL \
- (QCA955X_EXT_INT_WMAC_MISC | QCA955X_EXT_INT_WMAC_TX | \
- QCA955X_EXT_INT_WMAC_RXLP | QCA955X_EXT_INT_WMAC_RXHP)
-
-#define QCA955X_EXT_INT_PCIE_RC1_ALL \
- (QCA955X_EXT_INT_PCIE_RC1 | QCA955X_EXT_INT_PCIE_RC1_INT0 | \
- QCA955X_EXT_INT_PCIE_RC1_INT1 | QCA955X_EXT_INT_PCIE_RC1_INT2 | \
- QCA955X_EXT_INT_PCIE_RC1_INT3)
-
-#define QCA955X_EXT_INT_PCIE_RC2_ALL \
- (QCA955X_EXT_INT_PCIE_RC2 | QCA955X_EXT_INT_PCIE_RC2_INT0 | \
- QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
- QCA955X_EXT_INT_PCIE_RC2_INT3)
-
-#define REV_ID_MAJOR_MASK 0xfff0
-#define REV_ID_MAJOR_AR71XX 0x00a0
-#define REV_ID_MAJOR_AR913X 0x00b0
-#define REV_ID_MAJOR_AR7240 0x00c0
-#define REV_ID_MAJOR_AR7241 0x0100
-#define REV_ID_MAJOR_AR7242 0x1100
-#define REV_ID_MAJOR_AR9330 0x0110
-#define REV_ID_MAJOR_AR9331 0x1110
-#define REV_ID_MAJOR_AR9341 0x0120
-#define REV_ID_MAJOR_AR9342 0x1120
-#define REV_ID_MAJOR_AR9344 0x2120
-#define REV_ID_MAJOR_QCA9558 0x1130
-
-#define AR71XX_REV_ID_MINOR_MASK 0x3
-#define AR71XX_REV_ID_MINOR_AR7130 0x0
-#define AR71XX_REV_ID_MINOR_AR7141 0x1
-#define AR71XX_REV_ID_MINOR_AR7161 0x2
-#define AR71XX_REV_ID_REVISION_MASK 0x3
-#define AR71XX_REV_ID_REVISION_SHIFT 2
-
-#define AR913X_REV_ID_MINOR_MASK 0x3
-#define AR913X_REV_ID_MINOR_AR9130 0x0
-#define AR913X_REV_ID_MINOR_AR9132 0x1
-#define AR913X_REV_ID_REVISION_MASK 0x3
-#define AR913X_REV_ID_REVISION_SHIFT 2
-
-#define AR933X_REV_ID_REVISION_MASK 0x3
-
-#define AR724X_REV_ID_REVISION_MASK 0x3
-
-#define AR934X_REV_ID_REVISION_MASK 0xf
-
-#define AR944X_REV_ID_REVISION_MASK 0xf
-
-/*
- * SPI block
- */
-#define AR71XX_SPI_REG_FS 0x00 /* Function Select */
-#define AR71XX_SPI_REG_CTRL 0x04 /* SPI Control */
-#define AR71XX_SPI_REG_IOC 0x08 /* SPI I/O Control */
-#define AR71XX_SPI_REG_RDS 0x0c /* Read Data Shift */
-
-#define AR71XX_SPI_FS_GPIO BIT(0) /* Enable GPIO mode */
-
-#define AR71XX_SPI_CTRL_RD BIT(6) /* Remap Disable */
-#define AR71XX_SPI_CTRL_DIV_MASK 0x3f
-
-#define AR71XX_SPI_IOC_DO BIT(0) /* Data Out pin */
-#define AR71XX_SPI_IOC_CLK BIT(8) /* CLK pin */
-#define AR71XX_SPI_IOC_CS(n) BIT(16 + (n))
-#define AR71XX_SPI_IOC_CS0 AR71XX_SPI_IOC_CS(0)
-#define AR71XX_SPI_IOC_CS1 AR71XX_SPI_IOC_CS(1)
-#define AR71XX_SPI_IOC_CS2 AR71XX_SPI_IOC_CS(2)
-#define AR71XX_SPI_IOC_CS_ALL (AR71XX_SPI_IOC_CS0 | AR71XX_SPI_IOC_CS1 | \
- AR71XX_SPI_IOC_CS2)
-
-/*
- * GPIO block
- */
-#define AR71XX_GPIO_REG_OE 0x00
-#define AR71XX_GPIO_REG_IN 0x04
-#define AR71XX_GPIO_REG_OUT 0x08
-#define AR71XX_GPIO_REG_SET 0x0c
-#define AR71XX_GPIO_REG_CLEAR 0x10
-#define AR71XX_GPIO_REG_INT_MODE 0x14
-#define AR71XX_GPIO_REG_INT_TYPE 0x18
-#define AR71XX_GPIO_REG_INT_POLARITY 0x1c
-#define AR71XX_GPIO_REG_INT_PENDING 0x20
-#define AR71XX_GPIO_REG_INT_ENABLE 0x24
-#define AR71XX_GPIO_REG_FUNC 0x28
-
-#define AR934X_GPIO_REG_OUT_FUNC0 0x2c
-#define AR934X_GPIO_REG_OUT_FUNC1 0x30
-#define AR934X_GPIO_REG_OUT_FUNC2 0x34
-#define AR934X_GPIO_REG_OUT_FUNC3 0x38
-#define AR934X_GPIO_REG_OUT_FUNC4 0x3c
-#define AR934X_GPIO_REG_OUT_FUNC5 0x40
-#define AR934X_GPIO_REG_FUNC 0x6c
-
-#define AR71XX_GPIO_COUNT 16
-#define AR724X_GPIO_COUNT 18
-#define AR913X_GPIO_COUNT 22
-#define AR933X_GPIO_COUNT 30
-#define AR934X_GPIO_COUNT 23
-#define QCA955X_GPIO_COUNT 24
-
-#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
-#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
-#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
-#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12)
-#define AR71XX_GPIO_FUNC_UART_EN BIT(8)
-#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4)
-#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0)
-
-#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19)
-#define AR724X_GPIO_FUNC_SPI_EN BIT(18)
-#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12)
-#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11)
-#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10)
-#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9)
-#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-#define AR724X_GPIO_FUNC_UART_EN BIT(1)
-#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-
-#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22)
-#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21)
-#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20)
-#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19)
-#define AR913X_GPIO_FUNC_I2S1_EN BIT(18)
-#define AR913X_GPIO_FUNC_I2S0_EN BIT(17)
-#define AR913X_GPIO_FUNC_SLIC_EN BIT(16)
-#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9)
-#define AR913X_GPIO_FUNC_UART_EN BIT(8)
-#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4)
-
-#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31)
-#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30)
-#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29)
-#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27)
-#define AR933X_GPIO_FUNC_I2SO_EN BIT(26)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23)
-#define AR933X_GPIO_FUNC_SPI_EN BIT(18)
-#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-#define AR933X_GPIO_FUNC_UART_EN BIT(1)
-#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-
-#define AR934X_GPIO_FUNC_DDR_DQOE_EN BIT(17)
-#define AR934X_GPIO_FUNC_SPI_CS_1_EN BIT(14)
-#define AR934X_GPIO_FUNC_SPI_CS_0_EN BIT(13)
-
-#define AR934X_GPIO_OUT_GPIO 0x00
-
-/*
- * MII_CTRL block
- */
-#define AR71XX_MII_REG_MII0_CTRL 0x00
-#define AR71XX_MII_REG_MII1_CTRL 0x04
-
-#define AR71XX_MII_CTRL_IF_MASK 3
-#define AR71XX_MII_CTRL_SPEED_SHIFT 4
-#define AR71XX_MII_CTRL_SPEED_MASK 3
-#define AR71XX_MII_CTRL_SPEED_10 0
-#define AR71XX_MII_CTRL_SPEED_100 1
-#define AR71XX_MII_CTRL_SPEED_1000 2
-
-#define AR71XX_MII0_CTRL_IF_GMII 0
-#define AR71XX_MII0_CTRL_IF_MII 1
-#define AR71XX_MII0_CTRL_IF_RGMII 2
-#define AR71XX_MII0_CTRL_IF_RMII 3
-
-#define AR71XX_MII1_CTRL_IF_RGMII 0
-#define AR71XX_MII1_CTRL_IF_RMII 1
-
-/*
- * AR933X GMAC interface
- */
-#define AR933X_GMAC_REG_ETH_CFG 0x00
-
-#define AR933X_ETH_CFG_RGMII_GE0 BIT(0)
-#define AR933X_ETH_CFG_MII_GE0 BIT(1)
-#define AR933X_ETH_CFG_GMII_GE0 BIT(2)
-#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3)
-#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4)
-#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5)
-#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7)
-#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8)
-#define AR933X_ETH_CFG_RMII_GE0 BIT(9)
-#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0
-#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10)
-
-/*
- * AR934X GMAC Interface
- */
-#define AR934X_GMAC_REG_ETH_CFG 0x00
-
-#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0)
-#define AR934X_ETH_CFG_MII_GMAC0 BIT(1)
-#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2)
-#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3)
-#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4)
-#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5)
-#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6)
-#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7)
-#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9)
-#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10)
-#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
-#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
-#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-
-/*
- * QCA955X GMAC Interface
- */
-
-#define QCA955X_GMAC_REG_ETH_CFG 0x00
-
-#define QCA955X_ETH_CFG_RGMII_GMAC0 BIT(0)
-#define QCA955X_ETH_CFG_SGMII_GMAC0 BIT(6)
-
-#endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/image/lzma-loader/src/board.c b/target/linux/ar71xx/image/lzma-loader/src/board.c
deleted file mode 100644
index 2f4dd6b1f6..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/board.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <stddef.h>
-#include "config.h"
-#include "ar71xx_regs.h"
-
-#define READREG(r) *(volatile unsigned int *)(r)
-#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v
-
-#define KSEG1ADDR(_x) (((_x) & 0x1fffffff) | 0xa0000000)
-
-#define UART_BASE 0xb8020000
-
-#define UART_TX 0
-#define UART_LSR 5
-
-#define UART_LSR_THRE 0x20
-
-#define UART_READ(r) READREG(UART_BASE + 4 * (r))
-#define UART_WRITE(r,v) WRITEREG(UART_BASE + 4 * (r), (v))
-
-void board_putc(int ch)
-{
- while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0);
- UART_WRITE(UART_TX, ch);
- while (((UART_READ(UART_LSR)) & UART_LSR_THRE) == 0);
-}
-
-#ifdef CONFIG_BOARD_TL_WR1043ND_V1
-static void tlwr1043nd_init(void)
-{
- unsigned int reg = KSEG1ADDR(AR71XX_RESET_BASE);
- unsigned int t;
-
- t = READREG(reg + AR913X_RESET_REG_RESET_MODULE);
- t |= AR71XX_RESET_GE0_PHY;
- WRITEREG(reg + AR913X_RESET_REG_RESET_MODULE, t);
- /* flush write */
- t = READREG(reg + AR913X_RESET_REG_RESET_MODULE);
-}
-#else
-static inline void tlwr1043nd_init(void) {}
-#endif
-
-void board_init(void)
-{
- tlwr1043nd_init();
-}
diff --git a/target/linux/ar71xx/image/lzma-loader/src/cache.c b/target/linux/ar71xx/image/lzma-loader/src/cache.c
deleted file mode 100644
index 28cc848333..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/cache.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * The cache manipulation routine has been taken from the U-Boot project.
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include "cache.h"
-#include "cacheops.h"
-#include "config.h"
-
-#define cache_op(op,addr) \
- __asm__ __volatile__( \
- " .set push \n" \
- " .set noreorder \n" \
- " .set mips3\n\t \n" \
- " cache %0, %1 \n" \
- " .set pop \n" \
- : \
- : "i" (op), "R" (*(unsigned char *)(addr)))
-
-void flush_cache(unsigned long start_addr, unsigned long size)
-{
- unsigned long lsize = CONFIG_CACHELINE_SIZE;
- unsigned long addr = start_addr & ~(lsize - 1);
- unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
-
- while (1) {
- cache_op(Hit_Writeback_Inv_D, addr);
- cache_op(Hit_Invalidate_I, addr);
- if (addr == aend)
- break;
- addr += lsize;
- }
-}
diff --git a/target/linux/ar71xx/image/lzma-loader/src/cache.h b/target/linux/ar71xx/image/lzma-loader/src/cache.h
deleted file mode 100644
index 506a235884..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/cache.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef __CACHE_H
-#define __CACHE_H
-
-void flush_cache(unsigned long start_addr, unsigned long size);
-
-#endif /* __CACHE_H */
diff --git a/target/linux/ar71xx/image/lzma-loader/src/cacheops.h b/target/linux/ar71xx/image/lzma-loader/src/cacheops.h
deleted file mode 100644
index 70bcad7694..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/cacheops.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Cache operations for the cache instruction.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * (C) Copyright 1996, 97, 99, 2002, 03 Ralf Baechle
- * (C) Copyright 1999 Silicon Graphics, Inc.
- */
-#ifndef __ASM_CACHEOPS_H
-#define __ASM_CACHEOPS_H
-
-/*
- * Cache Operations available on all MIPS processors with R4000-style caches
- */
-#define Index_Invalidate_I 0x00
-#define Index_Writeback_Inv_D 0x01
-#define Index_Load_Tag_I 0x04
-#define Index_Load_Tag_D 0x05
-#define Index_Store_Tag_I 0x08
-#define Index_Store_Tag_D 0x09
-#if defined(CONFIG_CPU_LOONGSON2)
-#define Hit_Invalidate_I 0x00
-#else
-#define Hit_Invalidate_I 0x10
-#endif
-#define Hit_Invalidate_D 0x11
-#define Hit_Writeback_Inv_D 0x15
-
-/*
- * R4000-specific cacheops
- */
-#define Create_Dirty_Excl_D 0x0d
-#define Fill 0x14
-#define Hit_Writeback_I 0x18
-#define Hit_Writeback_D 0x19
-
-/*
- * R4000SC and R4400SC-specific cacheops
- */
-#define Index_Invalidate_SI 0x02
-#define Index_Writeback_Inv_SD 0x03
-#define Index_Load_Tag_SI 0x06
-#define Index_Load_Tag_SD 0x07
-#define Index_Store_Tag_SI 0x0A
-#define Index_Store_Tag_SD 0x0B
-#define Create_Dirty_Excl_SD 0x0f
-#define Hit_Invalidate_SI 0x12
-#define Hit_Invalidate_SD 0x13
-#define Hit_Writeback_Inv_SD 0x17
-#define Hit_Writeback_SD 0x1b
-#define Hit_Set_Virtual_SI 0x1e
-#define Hit_Set_Virtual_SD 0x1f
-
-/*
- * R5000-specific cacheops
- */
-#define R5K_Page_Invalidate_S 0x17
-
-/*
- * RM7000-specific cacheops
- */
-#define Page_Invalidate_T 0x16
-
-/*
- * R10000-specific cacheops
- *
- * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
- * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
- */
-#define Index_Writeback_Inv_S 0x03
-#define Index_Load_Tag_S 0x07
-#define Index_Store_Tag_S 0x0B
-#define Hit_Invalidate_S 0x13
-#define Cache_Barrier 0x14
-#define Hit_Writeback_Inv_S 0x17
-#define Index_Load_Data_I 0x18
-#define Index_Load_Data_D 0x19
-#define Index_Load_Data_S 0x1b
-#define Index_Store_Data_I 0x1c
-#define Index_Store_Data_D 0x1d
-#define Index_Store_Data_S 0x1f
-
-#endif /* __ASM_CACHEOPS_H */
diff --git a/target/linux/ar71xx/image/lzma-loader/src/config.h b/target/linux/ar71xx/image/lzma-loader/src/config.h
deleted file mode 100644
index 287392b340..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/config.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#ifndef _CONFIG_H_
-#define _CONFIG_H_
-
-#define CONFIG_ICACHE_SIZE (32 * 1024)
-#define CONFIG_DCACHE_SIZE (64 * 1024)
-#define CONFIG_CACHELINE_SIZE 32
-
-#ifndef CONFIG_FLASH_OFFS
-#define CONFIG_FLASH_OFFS 0
-#endif
-
-#ifndef CONFIG_FLASH_MAX
-#define CONFIG_FLASH_MAX 0
-#endif
-
-#ifndef CONFIG_FLASH_STEP
-#define CONFIG_FLASH_STEP 0x1000
-#endif
-
-#endif /* _CONFIG_H_ */
diff --git a/target/linux/ar71xx/image/lzma-loader/src/cp0regdef.h b/target/linux/ar71xx/image/lzma-loader/src/cp0regdef.h
deleted file mode 100644
index c1188ad8c8..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/cp0regdef.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * Copyright (C) 1994, 1995, 1996, 1997, 2000, 2001 by Ralf Baechle
- *
- * Copyright (C) 2001, Monta Vista Software
- * Author: jsun@mvista.com or jsun@junsun.net
- */
-#ifndef _cp0regdef_h_
-#define _cp0regdef_h_
-
-#define CP0_INDEX $0
-#define CP0_RANDOM $1
-#define CP0_ENTRYLO0 $2
-#define CP0_ENTRYLO1 $3
-#define CP0_CONTEXT $4
-#define CP0_PAGEMASK $5
-#define CP0_WIRED $6
-#define CP0_BADVADDR $8
-#define CP0_COUNT $9
-#define CP0_ENTRYHI $10
-#define CP0_COMPARE $11
-#define CP0_STATUS $12
-#define CP0_CAUSE $13
-#define CP0_EPC $14
-#define CP0_PRID $15
-#define CP0_CONFIG $16
-#define CP0_LLADDR $17
-#define CP0_WATCHLO $18
-#define CP0_WATCHHI $19
-#define CP0_XCONTEXT $20
-#define CP0_FRAMEMASK $21
-#define CP0_DIAGNOSTIC $22
-#define CP0_PERFORMANCE $25
-#define CP0_ECC $26
-#define CP0_CACHEERR $27
-#define CP0_TAGLO $28
-#define CP0_TAGHI $29
-#define CP0_ERROREPC $30
-
-#endif
diff --git a/target/linux/ar71xx/image/lzma-loader/src/head.S b/target/linux/ar71xx/image/lzma-loader/src/head.S
deleted file mode 100644
index d414b14d11..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/head.S
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * Some parts of this code was based on the OpenWrt specific lzma-loader
- * for the BCM47xx and ADM5120 based boards:
- * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
- * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <asm/asm.h>
-#include <asm/regdef.h>
-#include "cp0regdef.h"
-#include "cacheops.h"
-#include "config.h"
-
-#define KSEG0 0x80000000
-
- .macro ehb
- sll zero, 3
- .endm
-
- .text
-
-LEAF(startup)
- .set noreorder
- .set mips32
-
- mtc0 zero, CP0_WATCHLO # clear watch registers
- mtc0 zero, CP0_WATCHHI
- mtc0 zero, CP0_CAUSE # clear before writing status register
-
- mfc0 t0, CP0_STATUS
- li t1, 0x1000001f
- or t0, t1
- xori t0, 0x1f
- mtc0 t0, CP0_STATUS
- ehb
-
- /*
- * Some bootloaders set the 'Kseg0 coherency algorithm' to
- * 'Cacheable, noncoherent, write-through, no write allocate'
- * and this cause performance issues. Let's go and change it to
- * 'Cacheable, noncoherent, write-back, write allocate'
- */
- mfc0 t0, CP0_CONFIG
- li t1, ~7 #~CONF_CM_CMASK
- and t0, t1
- ori t0, 3 #CONF_CM_CACHABLE_NONCOHERENT
- mtc0 t0, CP0_CONFIG
- nop
-
- mtc0 zero, CP0_COUNT
- mtc0 zero, CP0_COMPARE
- ehb
-
- la t0, __reloc_label # get linked address of label
- bal __reloc_label # branch and link to label to
- nop # get actual address
-__reloc_label:
- subu t0, ra, t0 # get reloc_delta
-
- beqz t0, __reloc_done # if delta is 0 we are in the right place
- nop
-
- /* Copy our code to the right place */
- la t1, _code_start # get linked address of _code_start
- la t2, _code_end # get linked address of _code_end
- addu t0, t0, t1 # calculate actual address of _code_start
-
-__reloc_copy:
- lw t3, 0(t0)
- sw t3, 0(t1)
- add t1, 4
- blt t1, t2, __reloc_copy
- add t0, 4
-
- /* flush cache */
- la t0, _code_start
- la t1, _code_end
-
- li t2, ~(CONFIG_CACHELINE_SIZE - 1)
- and t0, t2
- and t1, t2
- li t2, CONFIG_CACHELINE_SIZE
-
- b __flush_check
- nop
-
-__flush_line:
- cache Hit_Writeback_Inv_D, 0(t0)
- cache Hit_Invalidate_I, 0(t0)
- add t0, t2
-
-__flush_check:
- bne t0, t1, __flush_line
- nop
-
- sync
-
-__reloc_done:
-
- /* clear bss */
- la t0, _bss_start
- la t1, _bss_end
- b __bss_check
- nop
-
-__bss_fill:
- sw zero, 0(t0)
- addi t0, 4
-
-__bss_check:
- bne t0, t1, __bss_fill
- nop
-
- /* Setup new "C" stack */
- la sp, _stack
-
- /* reserve stack space for a0-a3 registers */
- subu sp, 16
-
- /* jump to the decompressor routine */
- la t0, loader_main
- jr t0
- nop
-
- .set reorder
-END(startup)
diff --git a/target/linux/ar71xx/image/lzma-loader/src/loader.c b/target/linux/ar71xx/image/lzma-loader/src/loader.c
deleted file mode 100644
index 794c4b6285..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/loader.c
+++ /dev/null
@@ -1,264 +0,0 @@
-/*
- * LZMA compressed kernel loader for Atheros AR7XXX/AR9XXX based boards
- *
- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- *
- * Some parts of this code was based on the OpenWrt specific lzma-loader
- * for the BCM47xx and ADM5120 based boards:
- * Copyright (C) 2004 Manuel Novoa III (mjn3@codepoet.org)
- * Copyright (C) 2005 Mineharu Takahara <mtakahar@yahoo.com>
- * Copyright (C) 2005 by Oleg I. Vdovikin <oleg@cs.msu.su>
- *
- * The image_header structure has been taken from the U-Boot project.
- * (C) Copyright 2008 Semihalf
- * (C) Copyright 2000-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
-#include <stddef.h>
-#include <stdint.h>
-
-#include "config.h"
-#include "cache.h"
-#include "printf.h"
-#include "LzmaDecode.h"
-
-#define AR71XX_FLASH_START 0x1f000000
-#define AR71XX_FLASH_END 0x1fe00000
-
-#define KSEG0 0x80000000
-#define KSEG1 0xa0000000
-
-#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1)
-
-#undef LZMA_DEBUG
-
-#ifdef LZMA_DEBUG
-# define DBG(f, a...) printf(f, ## a)
-#else
-# define DBG(f, a...) do {} while (0)
-#endif
-
-#define IH_MAGIC_OKLI 0x4f4b4c49 /* 'OKLI' */
-
-#define IH_NMLEN 32 /* Image Name Length */
-
-typedef struct image_header {
- uint32_t ih_magic; /* Image Header Magic Number */
- uint32_t ih_hcrc; /* Image Header CRC Checksum */
- uint32_t ih_time; /* Image Creation Timestamp */
- uint32_t ih_size; /* Image Data Size */
- uint32_t ih_load; /* Data Load Address */
- uint32_t ih_ep; /* Entry Point Address */
- uint32_t ih_dcrc; /* Image Data CRC Checksum */
- uint8_t ih_os; /* Operating System */
- uint8_t ih_arch; /* CPU architecture */
- uint8_t ih_type; /* Image Type */
- uint8_t ih_comp; /* Compression Type */
- uint8_t ih_name[IH_NMLEN]; /* Image Name */
-} image_header_t;
-
-/* beyond the image end, size not known in advance */
-extern unsigned char workspace[];
-extern void board_init(void);
-
-static CLzmaDecoderState lzma_state;
-static unsigned char *lzma_data;
-static unsigned long lzma_datasize;
-static unsigned long lzma_outsize;
-static unsigned long kernel_la;
-
-#ifdef CONFIG_KERNEL_CMDLINE
-#define kernel_argc 2
-static const char kernel_cmdline[] = CONFIG_KERNEL_CMDLINE;
-static const char *const kernel_argv[] = {
- NULL,
- kernel_cmdline,
- NULL,
-};
-#endif /* CONFIG_KERNEL_CMDLINE */
-
-static void halt(void)
-{
- printf("\nSystem halted!\n");
- for(;;);
-}
-
-static __inline__ unsigned long get_be32(void *buf)
-{
- unsigned char *p = buf;
-
- return (((unsigned long) p[0] << 24) +
- ((unsigned long) p[1] << 16) +
- ((unsigned long) p[2] << 8) +
- (unsigned long) p[3]);
-}
-
-static __inline__ unsigned char lzma_get_byte(void)
-{
- unsigned char c;
-
- lzma_datasize--;
- c = *lzma_data++;
-
- return c;
-}
-
-static int lzma_init_props(void)
-{
- unsigned char props[LZMA_PROPERTIES_SIZE];
- int res;
- int i;
-
- /* read lzma properties */
- for (i = 0; i < LZMA_PROPERTIES_SIZE; i++)
- props[i] = lzma_get_byte();
-
- /* read the lower half of uncompressed size in the header */
- lzma_outsize = ((SizeT) lzma_get_byte()) +
- ((SizeT) lzma_get_byte() << 8) +
- ((SizeT) lzma_get_byte() << 16) +
- ((SizeT) lzma_get_byte() << 24);
-
- /* skip rest of the header (upper half of uncompressed size) */
- for (i = 0; i < 4; i++)
- lzma_get_byte();
-
- res = LzmaDecodeProperties(&lzma_state.Properties, props,
- LZMA_PROPERTIES_SIZE);
- return res;
-}
-
-static int lzma_decompress(unsigned char *outStream)
-{
- SizeT ip, op;
- int ret;
-
- lzma_state.Probs = (CProb *) workspace;
-
- ret = LzmaDecode(&lzma_state, lzma_data, lzma_datasize, &ip, outStream,
- lzma_outsize, &op);
-
- if (ret != LZMA_RESULT_OK) {
- int i;
-
- DBG("LzmaDecode error %d at %08x, osize:%d ip:%d op:%d\n",
- ret, lzma_data + ip, lzma_outsize, ip, op);
-
- for (i = 0; i < 16; i++)
- DBG("%02x ", lzma_data[ip + i]);
-
- DBG("\n");
- }
-
- return ret;
-}
-
-#if (LZMA_WRAPPER)
-static void lzma_init_data(void)
-{
- extern unsigned char _lzma_data_start[];
- extern unsigned char _lzma_data_end[];
-
- kernel_la = LOADADDR;
- lzma_data = _lzma_data_start;
- lzma_datasize = _lzma_data_end - _lzma_data_start;
-}
-#else
-static void lzma_init_data(void)
-{
- struct image_header *hdr = NULL;
- unsigned char *flash_base;
- unsigned long flash_ofs;
- unsigned long kernel_ofs;
- unsigned long kernel_size;
-
- flash_base = (unsigned char *) KSEG1ADDR(AR71XX_FLASH_START);
-
- printf("Looking for OpenWrt image... ");
-
- for (flash_ofs = CONFIG_FLASH_OFFS;
- flash_ofs <= (CONFIG_FLASH_OFFS + CONFIG_FLASH_MAX);
- flash_ofs += CONFIG_FLASH_STEP) {
- unsigned long magic;
- unsigned char *p;
-
- p = flash_base + flash_ofs;
- magic = get_be32(p);
- if (magic == IH_MAGIC_OKLI) {
- hdr = (struct image_header *) p;
- break;
- }
- }
-
- if (hdr == NULL) {
- printf("not found!\n");
- halt();
- }
-
- printf("found at 0x%08x\n", flash_base + flash_ofs);
-
- kernel_ofs = sizeof(struct image_header);
- kernel_size = get_be32(&hdr->ih_size);
- kernel_la = get_be32(&hdr->ih_load);
-
- lzma_data = flash_base + flash_ofs + kernel_ofs;
- lzma_datasize = kernel_size;
-}
-#endif /* (LZMA_WRAPPER) */
-
-void loader_main(unsigned long reg_a0, unsigned long reg_a1,
- unsigned long reg_a2, unsigned long reg_a3)
-{
- void (*kernel_entry) (unsigned long, unsigned long, unsigned long,
- unsigned long);
- int res;
-
- board_init();
-
- printf("\n\nOpenWrt kernel loader for AR7XXX/AR9XXX\n");
- printf("Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>\n");
-
- lzma_init_data();
-
- res = lzma_init_props();
- if (res != LZMA_RESULT_OK) {
- printf("Incorrect LZMA stream properties!\n");
- halt();
- }
-
- printf("Decompressing kernel... ");
-
- res = lzma_decompress((unsigned char *) kernel_la);
- if (res != LZMA_RESULT_OK) {
- printf("failed, ");
- switch (res) {
- case LZMA_RESULT_DATA_ERROR:
- printf("data error!\n");
- break;
- default:
- printf("unknown error %d!\n", res);
- }
- halt();
- } else {
- printf("done!\n");
- }
-
- flush_cache(kernel_la, lzma_outsize);
-
- printf("Starting kernel at %08x...\n\n", kernel_la);
-
-#ifdef CONFIG_KERNEL_CMDLINE
- reg_a0 = kernel_argc;
- reg_a1 = (unsigned long) kernel_argv;
- reg_a2 = 0;
- reg_a3 = 0;
-#endif
-
- kernel_entry = (void *) kernel_la;
- kernel_entry(reg_a0, reg_a1, reg_a2, reg_a3);
-}
diff --git a/target/linux/ar71xx/image/lzma-loader/src/loader.lds b/target/linux/ar71xx/image/lzma-loader/src/loader.lds
deleted file mode 100644
index 01ff852361..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/loader.lds
+++ /dev/null
@@ -1,34 +0,0 @@
-OUTPUT_ARCH(mips)
-SECTIONS {
- .text : {
- _code_start = .;
- *(.text)
- *(.text.*)
- *(.rodata)
- *(.rodata.*)
- *(.data.lzma)
- }
-
- . = ALIGN(32);
- .data : {
- *(.data)
- *(.data.*)
- }
-
- . = ALIGN(32);
- _code_end = .;
-
- _bss_start = .;
- .bss : {
- *(.bss)
- *(.bss.*)
- }
-
- . = ALIGN(32);
- _bss_end = .;
-
- . = . + 8192;
- _stack = .;
-
- workspace = .;
-}
diff --git a/target/linux/ar71xx/image/lzma-loader/src/loader2.lds b/target/linux/ar71xx/image/lzma-loader/src/loader2.lds
deleted file mode 100644
index db0bb46424..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/loader2.lds
+++ /dev/null
@@ -1,10 +0,0 @@
-OUTPUT_ARCH(mips)
-SECTIONS {
- .text : {
- startup = .;
- *(.text)
- *(.text.*)
- *(.data)
- *(.data.*)
- }
-}
diff --git a/target/linux/ar71xx/image/lzma-loader/src/lzma-data.lds b/target/linux/ar71xx/image/lzma-loader/src/lzma-data.lds
deleted file mode 100644
index abf756ba13..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/lzma-data.lds
+++ /dev/null
@@ -1,8 +0,0 @@
-OUTPUT_ARCH(mips)
-SECTIONS {
- .data.lzma : {
- _lzma_data_start = .;
- *(.data)
- _lzma_data_end = .;
- }
-}
diff --git a/target/linux/ar71xx/image/lzma-loader/src/printf.c b/target/linux/ar71xx/image/lzma-loader/src/printf.c
deleted file mode 100644
index 7bb5a86e18..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/printf.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include "printf.h"
-
-extern void board_putc(int ch);
-
-/* this is the maximum width for a variable */
-#define LP_MAX_BUF 256
-
-/* macros */
-#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') )
-#define Ctod(x) ( (x) - '0')
-
-/* forward declaration */
-static int PrintChar(char *, char, int, int);
-static int PrintString(char *, char *, int, int);
-static int PrintNum(char *, unsigned long, int, int, int, int, char, int);
-
-/* private variable */
-static const char theFatalMsg[] = "fatal error in lp_Print!";
-
-/* -*-
- * A low level printf() function.
- */
-static void
-lp_Print(void (*output)(void *, char *, int),
- void * arg,
- char *fmt,
- va_list ap)
-{
-
-#define OUTPUT(arg, s, l) \
- { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \
- (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \
- } else { \
- (*output)(arg, s, l); \
- } \
- }
-
- char buf[LP_MAX_BUF];
-
- char c;
- char *s;
- long int num;
-
- int longFlag;
- int negFlag;
- int width;
- int prec;
- int ladjust;
- char padc;
-
- int length;
-
- for(;;) {
- {
- /* scan for the next '%' */
- char *fmtStart = fmt;
- while ( (*fmt != '\0') && (*fmt != '%')) {
- fmt ++;
- }
-
- /* flush the string found so far */
- OUTPUT(arg, fmtStart, fmt-fmtStart);
-
- /* are we hitting the end? */
- if (*fmt == '\0') break;
- }
-
- /* we found a '%' */
- fmt ++;
-
- /* check for long */
- if (*fmt == 'l') {
- longFlag = 1;
- fmt ++;
- } else {
- longFlag = 0;
- }
-
- /* check for other prefixes */
- width = 0;
- prec = -1;
- ladjust = 0;
- padc = ' ';
-
- if (*fmt == '-') {
- ladjust = 1;
- fmt ++;
- }
-
- if (*fmt == '0') {
- padc = '0';
- fmt++;
- }
-
- if (IsDigit(*fmt)) {
- while (IsDigit(*fmt)) {
- width = 10 * width + Ctod(*fmt++);
- }
- }
-
- if (*fmt == '.') {
- fmt ++;
- if (IsDigit(*fmt)) {
- prec = 0;
- while (IsDigit(*fmt)) {
- prec = prec*10 + Ctod(*fmt++);
- }
- }
- }
-
-
- /* check format flag */
- negFlag = 0;
- switch (*fmt) {
- case 'b':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'd':
- case 'D':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- if (num < 0) {
- num = - num;
- negFlag = 1;
- }
- length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'o':
- case 'O':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'u':
- case 'U':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'x':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0);
- OUTPUT(arg, buf, length);
- break;
-
- case 'X':
- if (longFlag) {
- num = va_arg(ap, long int);
- } else {
- num = va_arg(ap, int);
- }
- length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1);
- OUTPUT(arg, buf, length);
- break;
-
- case 'c':
- c = (char)va_arg(ap, int);
- length = PrintChar(buf, c, width, ladjust);
- OUTPUT(arg, buf, length);
- break;
-
- case 's':
- s = (char*)va_arg(ap, char *);
- length = PrintString(buf, s, width, ladjust);
- OUTPUT(arg, buf, length);
- break;
-
- case '\0':
- fmt --;
- break;
-
- default:
- /* output this char as it is */
- OUTPUT(arg, fmt, 1);
- } /* switch (*fmt) */
-
- fmt ++;
- } /* for(;;) */
-
- /* special termination call */
- OUTPUT(arg, "\0", 1);
-}
-
-
-/* --------------- local help functions --------------------- */
-static int
-PrintChar(char * buf, char c, int length, int ladjust)
-{
- int i;
-
- if (length < 1) length = 1;
- if (ladjust) {
- *buf = c;
- for (i=1; i< length; i++) buf[i] = ' ';
- } else {
- for (i=0; i< length-1; i++) buf[i] = ' ';
- buf[length - 1] = c;
- }
- return length;
-}
-
-static int
-PrintString(char * buf, char* s, int length, int ladjust)
-{
- int i;
- int len=0;
- char* s1 = s;
- while (*s1++) len++;
- if (length < len) length = len;
-
- if (ladjust) {
- for (i=0; i< len; i++) buf[i] = s[i];
- for (i=len; i< length; i++) buf[i] = ' ';
- } else {
- for (i=0; i< length-len; i++) buf[i] = ' ';
- for (i=length-len; i < length; i++) buf[i] = s[i-length+len];
- }
- return length;
-}
-
-static int
-PrintNum(char * buf, unsigned long u, int base, int negFlag,
- int length, int ladjust, char padc, int upcase)
-{
- /* algorithm :
- * 1. prints the number from left to right in reverse form.
- * 2. fill the remaining spaces with padc if length is longer than
- * the actual length
- * TRICKY : if left adjusted, no "0" padding.
- * if negtive, insert "0" padding between "0" and number.
- * 3. if (!ladjust) we reverse the whole string including paddings
- * 4. otherwise we only reverse the actual string representing the num.
- */
-
- int actualLength =0;
- char *p = buf;
- int i;
-
- do {
- int tmp = u %base;
- if (tmp <= 9) {
- *p++ = '0' + tmp;
- } else if (upcase) {
- *p++ = 'A' + tmp - 10;
- } else {
- *p++ = 'a' + tmp - 10;
- }
- u /= base;
- } while (u != 0);
-
- if (negFlag) {
- *p++ = '-';
- }
-
- /* figure out actual length and adjust the maximum length */
- actualLength = p - buf;
- if (length < actualLength) length = actualLength;
-
- /* add padding */
- if (ladjust) {
- padc = ' ';
- }
- if (negFlag && !ladjust && (padc == '0')) {
- for (i = actualLength-1; i< length-1; i++) buf[i] = padc;
- buf[length -1] = '-';
- } else {
- for (i = actualLength; i< length; i++) buf[i] = padc;
- }
-
-
- /* prepare to reverse the string */
- {
- int begin = 0;
- int end;
- if (ladjust) {
- end = actualLength - 1;
- } else {
- end = length -1;
- }
-
- while (end > begin) {
- char tmp = buf[begin];
- buf[begin] = buf[end];
- buf[end] = tmp;
- begin ++;
- end --;
- }
- }
-
- /* adjust the string pointer */
- return length;
-}
-
-static void printf_output(void *arg, char *s, int l)
-{
- int i;
-
- // special termination call
- if ((l==1) && (s[0] == '\0')) return;
-
- for (i=0; i< l; i++) {
- board_putc(s[i]);
- if (s[i] == '\n') board_putc('\r');
- }
-}
-
-void printf(char *fmt, ...)
-{
- va_list ap;
- va_start(ap, fmt);
- lp_Print(printf_output, 0, fmt, ap);
- va_end(ap);
-}
diff --git a/target/linux/ar71xx/image/lzma-loader/src/printf.h b/target/linux/ar71xx/image/lzma-loader/src/printf.h
deleted file mode 100644
index 9b1c1df232..0000000000
--- a/target/linux/ar71xx/image/lzma-loader/src/printf.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#ifndef _printf_h_
-#define _printf_h_
-
-#include <stdarg.h>
-void printf(char *fmt, ...);
-
-#endif /* _printf_h_ */
diff --git a/target/linux/ar71xx/image/mikrotik.mk b/target/linux/ar71xx/image/mikrotik.mk
deleted file mode 100644
index 871f4c5352..0000000000
--- a/target/linux/ar71xx/image/mikrotik.mk
+++ /dev/null
@@ -1,61 +0,0 @@
-define Device/mikrotik
- PROFILES := Default
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
- BOARD_NAME := routerboard
- LOADER_TYPE := elf
- KERNEL_NAME := vmlinux.bin.lzma
- KERNEL := kernel-bin | loader-kernel
- KERNEL_INITRAMFS_NAME := vmlinux-initramfs.bin.lzma
- MIKROTIK_CHUNKSIZE :=
- IMAGE/sysupgrade.bin/squashfs :=
-endef
-DEVICE_VARS += MIKROTIK_CHUNKSIZE
-
-define Device/mikrotik-nand
- $(Device/mikrotik)
- IMAGE/sysupgrade.bin/squashfs = append-kernel | \
- kernel2minor -s $$(MIKROTIK_CHUNKSIZE) -e -c | sysupgrade-tar kernel=$$$$@
-endef
-
-define Device/nand-64m
- $(Device/mikrotik-nand)
- MIKROTIK_CHUNKSIZE := 512
- DEVICE_TITLE := MikroTik RouterBoard (64 MB NAND)
-endef
-TARGET_DEVICES += nand-64m
-
-define Device/nand-large
- $(Device/mikrotik-nand)
- MIKROTIK_CHUNKSIZE := 2048
- DEVICE_TITLE := MikroTik RouterBoard (>= 128 MB NAND)
-endef
-TARGET_DEVICES += nand-large
-
-define Device/nand-large-ac
- $(Device/mikrotik-nand)
- MIKROTIK_CHUNKSIZE := 2048
- DEVICE_TITLE := MikroTik RouterBoard (>= 128 MB NAND, 802.11ac)
- DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
- SUPPORTED_DEVICES := rb-921gs-5hpacd-r2 rb-922uags-5hpacd
-endef
-TARGET_DEVICES += nand-large-ac
-
-define Device/rb-nor-flash-16M
- $(Device/mikrotik)
- DEVICE_TITLE := MikroTik RouterBoard (16 MB SPI NOR)
- DEVICE_PACKAGES := rssileds -nand-utils kmod-ledtrig-gpio
- IMAGE_SIZE := 16000k
- KERNEL_INSTALL := 1
- SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-750p-pbr2 rb-911-2hn rb-911-5hn rb-931-2nd rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb-962uigs-5hact2hnt rb-lhg-5nd rb-map-2nd rb-mapl-2nd rb-wap-2nd rb-wapr-2nd rb-sxt-2nd-r3
- IMAGE/sysupgrade.bin := append-kernel | kernel2minor -s 1024 -e | pad-to $$$$(BLOCKSIZE) | \
- append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += rb-nor-flash-16M
-
-define Device/rb-nor-flash-16M-ac
- $(Device/rb-nor-flash-16M)
- DEVICE_TITLE := MikroTik RouterBoard (16 MB SPI NOR, 802.11ac)
- DEVICE_PACKAGES += kmod-ath10k-ct-smallbuffers ath10k-firmware-qca988x-ct ath10k-firmware-qca9887-ct kmod-usb-ehci
- SUPPORTED_DEVICES += rb-wapg-5hact2hnd
-endef
-TARGET_DEVICES += rb-nor-flash-16M-ac
diff --git a/target/linux/ar71xx/image/nand.mk b/target/linux/ar71xx/image/nand.mk
deleted file mode 100644
index 8cf2e98234..0000000000
--- a/target/linux/ar71xx/image/nand.mk
+++ /dev/null
@@ -1,137 +0,0 @@
-define Build/MerakiNAND
- -$(STAGING_DIR_HOST)/bin/mkmerakifw \
- -B $(BOARDNAME) -s \
- -i $@ \
- -o $@.new
- @mv $@.new $@
-endef
-
-define Build/MerakiNAND-old
- -$(STAGING_DIR_HOST)/bin/mkmerakifw-old \
- -B $(BOARDNAME) -s \
- -i $@ \
- -o $@.new
- @mv $@.new $@
-endef
-
-
-define Device/c-60
- DEVICE_TITLE := AirTight C-60
- DEVICE_PACKAGES := kmod-spi-gpio kmod-usb2 kmod-ath9k
- BOARDNAME := C-60
- BLOCKSIZE := 64k
- KERNEL_SIZE := 3648k
- IMAGE_SIZE := 32m
- IMAGES := sysupgrade.tar
- MTDPARTS := spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,3648k(kernel),64k(art)ro;ar934x-nfc:32m(ubi)
- KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
- IMAGE/sysupgrade.tar := sysupgrade-tar
-endef
-TARGET_DEVICES += c-60
-
-define Device/domywifi-dw33d
- DEVICE_TITLE := DomyWifi DW33D
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := DW33D
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware);ar934x-nfc:96m(rootfs_data),32m(backup)ro
- IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to 14528k | append-kernel | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += domywifi-dw33d
-
-define Device/hiveap-121
- DEVICE_TITLE := Aerohive HiveAP-121
- DEVICE_PACKAGES := kmod-usb2 kmod-i2c-gpio-custom kmod-spi-gpio kmod-ath9k kmod-tpm-i2c-atmel
- BOARDNAME := HiveAP-121
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- IMAGE_SIZE := 115m
- KERNEL_SIZE := 5120k
- UBINIZE_OPTS := -E 5
- CONSOLE := ttyS0,9600
- MTDPARTS := spi0.0:512k(u-boot)ro,64k(u-boot-env),64k(hw-info)ro,64k(boot-info)ro,64k(boot-sinfo)ro;ar934x-nfc:4096k(u-boot-1),4096k(u-boot-env-1),5m(kernel),111m(ubi),4096k(wifi-info)ro
- IMAGES := sysupgrade.tar factory.bin
- KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
- IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | check-size $$$$(IMAGE_SIZE)
- IMAGE/sysupgrade.tar := sysupgrade-tar
-endef
-TARGET_DEVICES += hiveap-121
-
-define Device/mr18
- DEVICE_TITLE := Meraki MR18
- DEVICE_PACKAGES := kmod-spi-gpio kmod-ath9k
- BOARDNAME := MR18
- BLOCKSIZE := 64k
- MTDPARTS := ar934x-nfc:512k(nandloader)ro,8M(kernel),8M(recovery),113664k(ubi),128k@130944k(odm-caldata)ro
- IMAGES := sysupgrade.tar
- KERNEL := kernel-bin | patch-cmdline | MerakiNAND
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | MerakiNAND
- IMAGE/sysupgrade.tar := sysupgrade-tar
-endef
-TARGET_DEVICES += mr18
-
-define Device/rambutan
- DEVICE_TITLE := 8devices Rambutan
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := RAMBUTAN
- BLOCKSIZE := 128KiB
- MTDPARTS := ar934x-nfc:3M(u-boot)ro,2M(u-boot-env),1M(art),122M(ubi)
- PAGESIZE := 2048
- KERNEL_IN_UBI := 1
- IMAGES := factory.ubi sysupgrade.tar
- IMAGE/sysupgrade.tar := sysupgrade-tar
- IMAGE/factory.ubi := append-ubi
-endef
-TARGET_DEVICES += rambutan
-
-define Device/wi2a-ac200i
- SUPPORTED_DEVICES = $(1)
- DEVICE_TITLE := Nokia WI2A-AC200i
- DEVICE_PACKAGES := kmod-usb2 kmod-ath9k kmod-ath10k-ct ath10k-firmware-qca988x-ct
- BOARDNAME := WI2A-AC200i
- BLOCKSIZE := 64k
- KERNEL_SIZE := 3648k
- IMAGE_SIZE := 32m
- IMAGES := sysupgrade.tar
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(envFacA)ro,64k(envFacB)ro,64k(ART)ro,128k(u-boot-env)
- KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
- IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-endef
-TARGET_DEVICES += wi2a-ac200i
-
-define Device/z1
- DEVICE_TITLE := Meraki Z1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-spi-gpio kmod-ath9k kmod-owl-loader
- BOARDNAME := Z1
- BLOCKSIZE := 64k
- MTDPARTS := ar934x-nfc:128K(loader1)ro,8064K(kernel),128K(loader2)ro,8064K(recovery),114560K(ubi),128K(origcaldata)ro
- IMAGES := sysupgrade.tar
- KERNEL := kernel-bin | patch-cmdline | MerakiNAND-old
- KERNEL_INITRAMFS := kernel-bin | patch-cmdline | MerakiNAND-old
- IMAGE/sysupgrade.tar := sysupgrade-tar
-endef
-TARGET_DEVICES += z1
-
-define LegacyDevice/R6100
- DEVICE_TITLE := NETGEAR R6100
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += R6100
-
-define LegacyDevice/WNDR3700V4
- DEVICE_TITLE := NETGEAR WNDR3700v4
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += WNDR3700V4
-
-define LegacyDevice/WNDR4300V1
- DEVICE_TITLE := NETGEAR WNDR4300v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += WNDR4300V1
-
-define LegacyDevice/NBG6716
- DEVICE_TITLE := Zyxel NBG 6716
- DEVICE_PACKAGES := kmod-rtc-pcf8563 kmod-ath10k-ct ath10k-firmware-qca988x-ct
-endef
-LEGACY_DEVICES += NBG6716
diff --git a/target/linux/ar71xx/image/tiny-legacy-devices.mk b/target/linux/ar71xx/image/tiny-legacy-devices.mk
deleted file mode 100644
index 7f63d19de0..0000000000
--- a/target/linux/ar71xx/image/tiny-legacy-devices.mk
+++ /dev/null
@@ -1,161 +0,0 @@
-define LegacyDevice/F9K1115V2
- DEVICE_TITLE := Belkin AC1750DB (F9K1115V2)
- DEVICE_PACKAGES := kmod-usb2 kmod-usb3 kmod-usb-ledtrig-usbport \
- kmod-ath10k-ct ath10k-firmware-qca988x-ct
-endef
-LEGACY_DEVICES += F9K1115V2
-
-define LegacyDevice/DIR600A1
- DEVICE_TITLE := D-Link DIR-600 rev. A1
-endef
-LEGACY_DEVICES += DIR600A1
-
-define LegacyDevice/DIR601A1
- DEVICE_TITLE := D-Link DIR-601 rev. A1
-endef
-LEGACY_DEVICES += DIR601A1
-
-define LegacyDevice/FR54RTR
- DEVICE_TITLE := Frys FR-54RTR
-endef
-LEGACY_DEVICES += FR54RTR
-
-define LegacyDevice/EBR2310C1
- DEVICE_TITLE := D-Link EBR-2310 rev. C1
-endef
-LEGACY_DEVICES += EBR2310C1
-
-define LegacyDevice/DIR615E1
- DEVICE_TITLE := D-Link DIR-615 rev. E1
-endef
-LEGACY_DEVICES += DIR615E1
-
-define LegacyDevice/DIR615E4
- DEVICE_TITLE := D-Link DIR-615 rev. E4
-endef
-LEGACY_DEVICES += DIR615E4
-
-define LegacyDevice/DIR615I1
- DEVICE_TITLE := D-Link DIR-615 rev. I1
-endef
-LEGACY_DEVICES += DIR615I1
-
-define LegacyDevice/DIR615I3
- DEVICE_TITLE := D-Link DIR-615 rev. I3
-endef
-LEGACY_DEVICES += DIR615I3
-
-define LegacyDevice/A02RBW300N
- DEVICE_TITLE := Atlantis-Land A02-RB-W300N
-endef
-LEGACY_DEVICES += A02RBW300N
-
-define LegacyDevice/DIR615C1
- DEVICE_TITLE := D-Link DIR-615 rev. C1
-endef
-LEGACY_DEVICES += DIR615C1
-
-define LegacyDevice/TEW632BRP
- DEVICE_TITLE := TRENDNet TEW-632BRP
-endef
-LEGACY_DEVICES += TEW632BRP
-
-define LegacyDevice/TEW652BRP_FW
- DEVICE_TITLE := TRENDNet TEW-652BRP
-endef
-LEGACY_DEVICES += TEW652BRP_FW
-
-define LegacyDevice/TEW652BRP_RECOVERY
- DEVICE_TITLE := TRENDNet TEW-652BRP (recovery)
-endef
-LEGACY_DEVICES += TEW652BRP_RECOVERY
-
-define LegacyDevice/TEW712BR
- DEVICE_TITLE := TRENDNet TEW-712BR
-endef
-LEGACY_DEVICES += TEW712BR
-
-define LegacyDevice/DIR601B1
- DEVICE_TITLE := D-Link DIR-601 rev. B1
-endef
-LEGACY_DEVICES += DIR601B1
-
-define LegacyDevice/WP543_4M
- DEVICE_TITLE := Compex WP543/WPJ543 (4MB flash)
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
-endef
-LEGACY_DEVICES += WP543_4M
-
-define LegacyDevice/WPE72_4M
- DEVICE_TITLE := Compex WPE72/WPE72NX (4MB flash)
- DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2
-endef
-LEGACY_DEVICES += WPE72_4M
-
-define LegacyDevice/WNR2000
- DEVICE_TITLE := NETGEAR WNR2000V1
-endef
-LEGACY_DEVICES += WNR2000
-
-define LegacyDevice/WNR2000V3
- DEVICE_TITLE := NETGEAR WNR2000V3
-endef
-LEGACY_DEVICES += WNR2000V3
-
-define LegacyDevice/WNR2000V4
- DEVICE_TITLE := NETGEAR WNR2000V4
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
-endef
-LEGACY_DEVICES += WNR2000V4
-
-define LegacyDevice/REALWNR612V2
- DEVICE_TITLE := NETGEAR WNR612V2
-endef
-LEGACY_DEVICES += REALWNR612V2
-
-define LegacyDevice/N150R
- DEVICE_TITLE := On Networks N150
-endef
-LEGACY_DEVICES += N150R
-
-define LegacyDevice/REALWNR1000V2
- DEVICE_TITLE := NETGEAR WNR1000V2
-endef
-LEGACY_DEVICES += REALWNR1000V2
-
-define LegacyDevice/WNR1000V2_VC
- DEVICE_TITLE := NETGEAR WNR1000V2-VC
-endef
-LEGACY_DEVICES += WNR1000V2_VC
-
-define LegacyDevice/WPN824N
- DEVICE_TITLE := NETGEAR WPN824N
-endef
-LEGACY_DEVICES += WPN824N
-
-define LegacyDevice/WHRG301N
- DEVICE_TITLE := Buffalo WHR-G301N
-endef
-LEGACY_DEVICES += WHRG301N
-
-define LegacyDevice/WHRHPG300N
- DEVICE_TITLE := Buffalo WHR-HP-G300N
-endef
-LEGACY_DEVICES += WHRHPG300N
-
-define LegacyDevice/WHRHPGN
- DEVICE_TITLE := Buffalo WHR-HP-GN
-endef
-LEGACY_DEVICES += WHRHPGN
-
-define LegacyDevice/WLAEAG300N
- DEVICE_TITLE := Buffalo WLAE-AG300N
- DEVICE_PACKAGES := kmod-ledtrig-netdev
-endef
-LEGACY_DEVICES += WLAEAG300N
-
-define LegacyDevice/NBG_460N_550N_550NH
- DEVICE_TITLE := ZyXEL NBG 460N/550N/550NH
- DEVICE_PACKAGES := kmod-rtc-pcf8563
-endef
-LEGACY_DEVICES += NBG_460N_550N_550NH
diff --git a/target/linux/ar71xx/image/tiny-senao.mk b/target/linux/ar71xx/image/tiny-senao.mk
deleted file mode 100644
index 3a7f6776b3..0000000000
--- a/target/linux/ar71xx/image/tiny-senao.mk
+++ /dev/null
@@ -1,28 +0,0 @@
-define Build/senao-factory-image
- mkdir -p $@.senao
-
- touch $@.senao/FWINFO-OpenWrt-$(REVISION)-$(1)
- $(CP) $(IMAGE_KERNEL) $@.senao/openwrt-senao-$(1)-uImage-lzma.bin
- $(CP) $@ $@.senao/openwrt-senao-$(1)-root.squashfs
-
- $(TAR) -c \
- --numeric-owner --owner=0 --group=0 --sort=name \
- $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
- -C $@.senao . | gzip -9nc > $@
-
- rm -rf $@.senao
-endef
-
-
-define Device/ens202ext
- DEVICE_TITLE := EnGenius ENS202EXT
- BOARDNAME := ENS202EXT
- DEVICE_PACKAGES := rssileds
- KERNEL_SIZE := 1536k
- IMAGE_SIZE := 13632k
- IMAGES += factory.bin
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe)ro,64k(art)ro,13632k@0xa0000(firmware)
- IMAGE/factory.bin := append-rootfs | pad-rootfs | senao-factory-image ens202ext
- IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
-endef
-TARGET_DEVICES += ens202ext
diff --git a/target/linux/ar71xx/image/tiny-tp-link.mk b/target/linux/ar71xx/image/tiny-tp-link.mk
deleted file mode 100644
index 5874808d21..0000000000
--- a/target/linux/ar71xx/image/tiny-tp-link.mk
+++ /dev/null
@@ -1,695 +0,0 @@
-include ./common-tp-link.mk
-
-
-define Device/tl-mr10u-v1
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-MR10U v1
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := TL-MR10U
- DEVICE_PROFILE := TLMR10U
- TPLINK_HWID := 0x00100101
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += tl-mr10u-v1
-
-define Device/tl-mr11u-v1
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-MR11U v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-MR11U
- DEVICE_PROFILE := TLMR11U
- TPLINK_HWID := 0x00110101
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += tl-mr11u-v1
-
-define Device/tl-mr11u-v2
- $(Device/tl-mr11u-v1)
- DEVICE_TITLE := TP-LINK TL-MR11U v2
- TPLINK_HWID := 0x00110102
-endef
-TARGET_DEVICES += tl-mr11u-v2
-
-define Device/tl-mr12u-v1
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-MR12U v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-MR13U
- DEVICE_PROFILE := TLMR12U
- TPLINK_HWID := 0x00120101
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += tl-mr12u-v1
-
-define Device/tl-mr13u-v1
- $(Device/tl-mr12u-v1)
- DEVICE_TITLE := TP-LINK TL-MR13U v1
- DEVICE_PROFILE := TLMR13U
- TPLINK_HWID := 0x00130101
-endef
-TARGET_DEVICES += tl-mr13u-v1
-
-define Device/tl-mr3020-v1
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-MR3020 v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-MR3020
- DEVICE_PROFILE := TLMR3020
- TPLINK_HWID := 0x30200001
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += tl-mr3020-v1
-
-define Device/tl-mr3040-v1
- $(Device/tl-mr3020-v1)
- DEVICE_TITLE := TP-LINK TL-MR3040 v1
- BOARDNAME := TL-MR3040
- DEVICE_PROFILE := TLMR3040
- TPLINK_HWID := 0x30400001
-endef
-TARGET_DEVICES += tl-mr3040-v1
-
-define Device/tl-mr3040-v2
- $(Device/tl-mr3040-v1)
- DEVICE_TITLE := TP-LINK TL-MR3040 v2
- BOARDNAME := TL-MR3040-v2
- TPLINK_HWID := 0x30400002
-endef
-TARGET_DEVICES += tl-mr3040-v2
-
-define Device/tl-mr3220-v1
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-MR3220 v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-MR3220
- DEVICE_PROFILE := TLMR3220
- TPLINK_HWID := 0x32200001
-endef
-TARGET_DEVICES += tl-mr3220-v1
-
-define Device/tl-mr3220-v2
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-MR3220 v2
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-MR3220-v2
- DEVICE_PROFILE := TLMR3220
- TPLINK_HWID := 0x32200002
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += tl-mr3220-v2
-
-define Device/tl-mr3420-v1
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-MR3420 v1
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-MR3420
- DEVICE_PROFILE := TLMR3420
- TPLINK_HWID := 0x34200001
-endef
-TARGET_DEVICES += tl-mr3420-v1
-
-define Device/tl-mr3420-v2
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-MR3420 v2
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-MR3420-v2
- DEVICE_PROFILE := TLMR3420
- TPLINK_HWID := 0x34200002
-endef
-TARGET_DEVICES += tl-mr3420-v2
-
-define Device/tl-wa701nd-v1
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WA701N/ND v1
- BOARDNAME := TL-WA901ND
- DEVICE_PROFILE := TLWA701
- TPLINK_HWID := 0x07010001
-endef
-TARGET_DEVICES += tl-wa701nd-v1
-
-define Device/tl-wa701nd-v2
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WA701N/ND v2
- BOARDNAME := TL-WA701ND-v2
- DEVICE_PROFILE := TLWA701
- TPLINK_HWID := 0x07010002
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += tl-wa701nd-v2
-
-define Device/tl-wa7210n-v2
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WA7210N v2
- DEVICE_PACKAGES := rssileds kmod-ledtrig-netdev
- BOARDNAME := TL-WA7210N-v2
- DEVICE_PROFILE := TLWA7210
- TPLINK_HWID := 0x72100002
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += tl-wa7210n-v2
-
-define Device/tl-wa730re-v1
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WA730RE v1
- BOARDNAME := TL-WA901ND
- DEVICE_PROFILE := TLWA730RE
- TPLINK_HWID := 0x07300001
-endef
-TARGET_DEVICES += tl-wa730re-v1
-
-define Device/tl-wa750re-v1
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WA750RE v1
- DEVICE_PACKAGES := rssileds
- BOARDNAME := TL-WA750RE
- DEVICE_PROFILE := TLWA750
- TPLINK_HWID := 0x07500001
-endef
-TARGET_DEVICES += tl-wa750re-v1
-
-define Device/tl-wa7510n-v1
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WA7510N v1
- BOARDNAME := TL-WA7510N
- DEVICE_PROFILE := TLWA7510
- TPLINK_HWID := 0x75100001
-endef
-TARGET_DEVICES += tl-wa7510n-v1
-
-define Device/tl-wa801nd-v1
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WA801N/ND v1
- BOARDNAME := TL-WA901ND
- DEVICE_PROFILE := TLWA801
- TPLINK_HWID := 0x08010001
-endef
-TARGET_DEVICES += tl-wa801nd-v1
-
-define Device/tl-wa801nd-v2
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WA801N/ND v2
- BOARDNAME := TL-WA801ND-v2
- DEVICE_PROFILE := TLWA801
- TPLINK_HWID := 0x08010002
-endef
-TARGET_DEVICES += tl-wa801nd-v2
-
-define Device/tl-wa801nd-v3
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WA801N/ND v3
- BOARDNAME := TL-WA801ND-v3
- DEVICE_PROFILE := TLWA801
- TPLINK_HWID := 0x08010003
-endef
-TARGET_DEVICES += tl-wa801nd-v3
-
-define Device/tl-wa801nd-v4
- $(Device/tl-wa801nd-v3)
- DEVICE_TITLE := TP-LINK TL-WA801N/ND v4
- TPLINK_HWID := 0x08010004
-endef
-TARGET_DEVICES += tl-wa801nd-v4
-
-define Device/tl-wa830re-v1
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WA830RE v1
- BOARDNAME := TL-WA901ND
- DEVICE_PROFILE := TLWA830
- TPLINK_HWID := 0x08300010
-endef
-TARGET_DEVICES += tl-wa830re-v1
-
-define Device/tl-wa830re-v2
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WA830RE v2
- BOARDNAME := TL-WA830RE-v2
- DEVICE_PROFILE := TLWA830
- TPLINK_HWID := 0x08300002
-endef
-TARGET_DEVICES += tl-wa830re-v2
-
-define Device/tl-wa850re-v1
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WA850RE v1
- DEVICE_PACKAGES := rssileds
- BOARDNAME := TL-WA850RE
- DEVICE_PROFILE := TLWA850
- TPLINK_HWID := 0x08500001
-endef
-TARGET_DEVICES += tl-wa850re-v1
-
-define Device/tl-wa850re-v2
- $(Device/tplink-safeloader)
- DEVICE_TITLE := TP-LINK TL-WA850RE v2
- DEVICE_PACKAGES := rssileds
- BOARDNAME := TL-WA850RE-V2
- DEVICE_PROFILE := TLWA850
- TPLINK_BOARD_ID := TLWA850REV2
- TPLINK_HWID := 0x08500002
- TPLINK_HWREV := 0
- IMAGE_SIZE := 3648k
- MTDPARTS := spi0.0:128k(u-boot)ro,3648k(firmware),256k(config)ro,64k(art)ro
-endef
-TARGET_DEVICES += tl-wa850re-v2
-
-define Device/tl-wa855re-v1
- $(Device/tplink-safeloader)
- DEVICE_TITLE := TP-LINK TL-WA855RE v1
- BOARDNAME := TL-WA855RE-v1
- DEVICE_PROFILE := TLWA855RE
- TPLINK_HWID := 0x08550001
- TPLINK_BOARD_ID := TLWA855REV1
- TPLINK_HWREV := 0
- IMAGE_SIZE := 3648k
- MTDPARTS := spi0.0:128k(u-boot)ro,1344k(kernel),2304k(rootfs),256k(config)ro,64k(art)ro,3648k@0x20000(firmware)
-endef
-TARGET_DEVICES += tl-wa855re-v1
-
-define Device/tl-wa860re-v1
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WA860RE v1
- BOARDNAME := TL-WA860RE
- DEVICE_PROFILE := TLWA860
- TPLINK_HWID := 0x08600001
-endef
-TARGET_DEVICES += tl-wa860re-v1
-
-define Device/tl-wa901nd-v1
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WA901N/ND v1
- BOARDNAME := TL-WA901ND
- DEVICE_PROFILE := TLWA901
- TPLINK_HWID := 0x09010001
-endef
-TARGET_DEVICES += tl-wa901nd-v1
-
-define Device/tl-wa901nd-v2
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WA901N/ND v2
- BOARDNAME := TL-WA901ND-v2
- DEVICE_PROFILE := TLWA901
- TPLINK_HWID := 0x09010002
-endef
-TARGET_DEVICES += tl-wa901nd-v2
-
-define Device/tl-wa901nd-v3
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WA901N/ND v3
- BOARDNAME := TL-WA901ND-v3
- DEVICE_PROFILE := TLWA901
- TPLINK_HWID := 0x09010003
-endef
-TARGET_DEVICES += tl-wa901nd-v3
-
-define Device/tl-wa901nd-v4
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WA901N/ND v4
- BOARDNAME := TL-WA901ND-v4
- DEVICE_PROFILE := TLWA901
- TPLINK_HWID := 0x09010004
- IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C EU
-endef
-TARGET_DEVICES += tl-wa901nd-v4
-
-define Device/tl-wa901nd-v5
- $(Device/tl-wa901nd-v4)
- DEVICE_TITLE := TP-LINK TL-WA901N/ND v5
- BOARDNAME := TL-WA901ND-v5
- TPLINK_HWID := 0x09010005
-endef
-TARGET_DEVICES += tl-wa901nd-v5
-
-define Device/tl-wdr3320-v2
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WDR3320 v2
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
- BOARDNAME := TL-WDR3320-v2
- DEVICE_PROFILE := TLWDR3320V2
- TPLINK_HWID := 0x33200002
- TPLINK_HEADER_VERSION := 2
-endef
-TARGET_DEVICES += tl-wdr3320-v2
-
-define Device/tl-wr1041n-v2
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR1041N v2
- BOARDNAME := TL-WR1041N-v2
- DEVICE_PROFILE := TLWR1041
- TPLINK_HWID := 0x10410002
-endef
-TARGET_DEVICES += tl-wr1041n-v2
-
-define Device/tl-wr703n-v1
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR703N v1
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := TL-WR703N
- DEVICE_PROFILE := TLWR703
- TPLINK_HWID := 0x07030101
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += tl-wr703n-v1
-
-define Device/tl-wr710n-v2
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR710N v2
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := TL-WR710N
- DEVICE_PROFILE := TLWR710
- TPLINK_HWID := 0x07100002
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += tl-wr710n-v2
-
-define Device/tl-wr720n-v3
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR720N v3
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := TL-WR720N-v3
- DEVICE_PROFILE := TLWR720
- TPLINK_HWID := 0x07200103
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += tl-wr720n-v3
-
-define Device/tl-wr720n-v4
- $(Device/tl-wr720n-v3)
- DEVICE_TITLE := TP-LINK TL-WR720N v4
- TPLINK_HWID := 0x07200104
-endef
-TARGET_DEVICES += tl-wr720n-v4
-
-define Device/tl-wr740n-v1
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WR740N/ND v1
- BOARDNAME := TL-WR741ND
- DEVICE_PROFILE := TLWR740
- TPLINK_HWID := 0x07400001
-endef
-TARGET_DEVICES += tl-wr740n-v1
-
-define Device/tl-wr740n-v3
- $(Device/tl-wr740n-v1)
- DEVICE_TITLE := TP-LINK TL-WR740N/ND v3
- TPLINK_HWID := 0x07400003
-endef
-TARGET_DEVICES += tl-wr740n-v3
-
-define Device/tl-wr740n-v4
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR740N/ND v4
- BOARDNAME := TL-WR741ND-v4
- DEVICE_PROFILE := TLWR740
- TPLINK_HWID := 0x07400004
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += tl-wr740n-v4
-
-define Device/tl-wr740n-v5
- $(Device/tl-wr740n-v4)
- DEVICE_TITLE := TP-LINK TL-WR740N/ND v5
- TPLINK_HWID := 0x07400005
-endef
-TARGET_DEVICES += tl-wr740n-v5
-
-define Device/tl-wr740n-v6
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR740N/ND v6
- BOARDNAME := TL-WR740N-v6
- DEVICE_PROFILE := TLWR740
- TPLINK_HWID := 0x07400006
-endef
-TARGET_DEVICES += tl-wr740n-v6
-
-define Device/tl-wr741nd-v1
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WR741N/ND v1
- BOARDNAME := TL-WR741ND
- DEVICE_PROFILE := TLWR741
- TPLINK_HWID := 0x07410001
-endef
-TARGET_DEVICES += tl-wr741nd-v1
-
-define Device/tl-wr741nd-v2
- $(Device/tl-wr741nd-v1)
- DEVICE_TITLE := TP-LINK TL-WR741N/ND v2
-endef
-TARGET_DEVICES += tl-wr741nd-v2
-
-define Device/tl-wr741nd-v4
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR741N/ND v4
- BOARDNAME := TL-WR741ND-v4
- DEVICE_PROFILE := TLWR741
- TPLINK_HWID := 0x07410004
- CONSOLE := ttyATH0,115200
-endef
-TARGET_DEVICES += tl-wr741nd-v4
-
-define Device/tl-wr741nd-v5
- $(Device/tl-wr741nd-v4)
- DEVICE_TITLE := TP-LINK TL-WR741N/ND v5
- TPLINK_HWID := 0x07400005
-endef
-TARGET_DEVICES += tl-wr741nd-v5
-
-define Device/tl-wr743nd-v1
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WR743N/ND v1
- BOARDNAME := TL-WR741ND
- DEVICE_PROFILE := TLWR743
- TPLINK_HWID := 0x07430001
-endef
-TARGET_DEVICES += tl-wr743nd-v1
-
-define Device/tl-wr743nd-v2
- $(Device/tl-wr741nd-v4)
- DEVICE_TITLE := TP-LINK TL-WR743N/ND v2
- DEVICE_PROFILE := TLWR743
- TPLINK_HWID := 0x07430002
-endef
-TARGET_DEVICES += tl-wr743nd-v2
-
-define Device/tl-wr802n-v1
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR802N v1
- BOARDNAME := TL-WR802N-v1
- DEVICE_PROFILE := TLWR802
- TPLINK_HWID := 0x08020001
- TPLINK_HWREV := 1
-endef
-TARGET_DEVICES += tl-wr802n-v1
-
-define Device/tl-wr802n-v2
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR802N v2
- BOARDNAME := TL-WR802N-v2
- DEVICE_PROFILE := TLWR802
- TPLINK_HWID := 0x08020002
- TPLINK_HWREV := 2
- IMAGES += factory-us.bin factory-eu.bin
- IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
- IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
-endef
-TARGET_DEVICES += tl-wr802n-v2
-
-define Device/tl-wr840n-v2
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR840N v2
- BOARDNAME := TL-WR840N-v2
- DEVICE_PROFILE := TLWR840
- TPLINK_HWID := 0x08400002
- IMAGES += factory-eu.bin
- IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
-endef
-TARGET_DEVICES += tl-wr840n-v2
-
-define Device/tl-wr840n-v3
- $(Device/tl-wr840n-v2)
- DEVICE_TITLE := TP-LINK TL-WR840N v3
- BOARDNAME := TL-WR840N-v3
- TPLINK_HWID := 0x08400003
-endef
-TARGET_DEVICES += tl-wr840n-v3
-
-define Device/tl-wr841-v1.5
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WR841N/ND v1.5
- BOARDNAME := TL-WR841N-v1.5
- DEVICE_PROFILE := TLWR841
- TPLINK_HWID := 0x08410002
- TPLINK_HWREV := 2
-endef
-TARGET_DEVICES += tl-wr841-v1.5
-
-define Device/tl-wr841-v3
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WR841N/ND v3
- BOARDNAME := TL-WR941ND
- DEVICE_PROFILE := TLWR841
- TPLINK_HWID := 0x08410003
- TPLINK_HWREV := 3
-endef
-TARGET_DEVICES += tl-wr841-v3
-
-define Device/tl-wr841-v5
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WR841N/ND v5
- BOARDNAME := TL-WR741ND
- DEVICE_PROFILE := TLWR841
- TPLINK_HWID := 0x08410005
-endef
-TARGET_DEVICES += tl-wr841-v5
-
-define Device/tl-wr841-v7
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WR841N/ND v7
- BOARDNAME := TL-WR841N-v7
- DEVICE_PROFILE := TLWR841
- TPLINK_HWID := 0x08410007
-endef
-TARGET_DEVICES += tl-wr841-v7
-
-define Device/tl-wr841-v8
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR841N/ND v8
- BOARDNAME := TL-WR841N-v8
- DEVICE_PROFILE := TLWR841
- TPLINK_HWID := 0x08410008
-endef
-TARGET_DEVICES += tl-wr841-v8
-
-define Device/tl-wr841-v9
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR841N/ND v9
- BOARDNAME := TL-WR841N-v9
- DEVICE_PROFILE := TLWR841
- TPLINK_HWID := 0x08410009
-endef
-TARGET_DEVICES += tl-wr841-v9
-
-define Device/tl-wr841-v10
- $(Device/tl-wr841-v9)
- DEVICE_TITLE := TP-LINK TL-WR841N/ND v10
- TPLINK_HWID := 0x08410010
-endef
-TARGET_DEVICES += tl-wr841-v10
-
-define Device/tl-wr841-v11
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR841N/ND v11
- BOARDNAME := TL-WR841N-v11
- DEVICE_PROFILE := TLWR841
- TPLINK_HWID := 0x08410011
- IMAGES += factory-us.bin factory-eu.bin
- IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
- IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
-endef
-TARGET_DEVICES += tl-wr841-v11
-
-define Device/tl-wr841-v12
- $(Device/tl-wr841-v11)
- DEVICE_TITLE := TP-LINK TL-WR841N/ND v12
- TPLINK_HWID := 0x08410012
-endef
-TARGET_DEVICES += tl-wr841-v12
-
-define Device/tl-wr843nd-v1
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR843N/ND v1
- BOARDNAME := TL-WR841N-v8
- DEVICE_PROFILE := TLWR843
- TPLINK_HWID := 0x08430001
-endef
-TARGET_DEVICES += tl-wr843nd-v1
-
-define Device/tl-wr847n-v8
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR847N/ND v8
- BOARDNAME := TL-WR841N-v8
- DEVICE_PROFILE := TLWR841
- TPLINK_HWID := 0x08470008
-endef
-TARGET_DEVICES += tl-wr847n-v8
-
-define Device/tl-wr940n-v4
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR940N v4
- BOARDNAME := TL-WR940N-v4
- DEVICE_PROFILE := TLWR941
- TPLINK_HWID := 0x09400004
- IMAGES += factory-us.bin factory-eu.bin factory-br.bin
- IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US
- IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU
- IMAGE/factory-br.bin := append-rootfs | mktplinkfw factory -C BR
-endef
-TARGET_DEVICES += tl-wr940n-v4
-
-define Device/tl-wr940n-v6
- $(Device/tl-wr940n-v4)
- DEVICE_TITLE := TP-LINK TL-WR940N v6
- BOARDNAME := TL-WR940N-v6
- TPLINK_HWID := 0x09400006
-endef
-TARGET_DEVICES += tl-wr940n-v6
-
-define Device/tl-wr941nd-v2
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WR941N/ND v2
- BOARDNAME := TL-WR941ND
- DEVICE_PROFILE := TLWR941
- TPLINK_HWID := 0x09410002
- TPLINK_HWREV := 2
-endef
-TARGET_DEVICES += tl-wr941nd-v2
-
-define Device/tl-wr941nd-v3
- $(Device/tl-wr941nd-v2)
- DEVICE_TITLE := TP-LINK TL-WR941N/ND v3
-endef
-TARGET_DEVICES += tl-wr941nd-v3
-
-define Device/rnx-n360rt
- $(Device/tl-wr941nd-v2)
- DEVICE_TITLE := Rosewill RNX-N360RT
- DEVICE_PROFILE := RNXN360RT
- TPLINK_HWREV := 0x00420001
-endef
-TARGET_DEVICES += rnx-n360rt
-
-define Device/tl-wr941nd-v4
- $(Device/tplink-4m)
- DEVICE_TITLE := TP-LINK TL-WR941N/ND v4
- BOARDNAME := TL-WR741ND
- DEVICE_PROFILE := TLWR941
- TPLINK_HWID := 0x09410004
-endef
-TARGET_DEVICES += tl-wr941nd-v4
-
-define Device/tl-wr941nd-v5
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR941N/ND v5
- BOARDNAME := TL-WR941ND-v5
- DEVICE_PROFILE := TLWR941
- TPLINK_HWID := 0x09410005
-endef
-TARGET_DEVICES += tl-wr941nd-v5
-
-define Device/tl-wr941nd-v6
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR941N/ND v6
- BOARDNAME := TL-WR941ND-v6
- DEVICE_PROFILE := TLWR941
- TPLINK_HWID := 0x09410006
-endef
-TARGET_DEVICES += tl-wr941nd-v6
-
-# Chinese version (unlike European) is similar to the TL-WDR3500
-define Device/tl-wr941nd-v6-cn
- $(Device/tplink-4mlzma)
- DEVICE_TITLE := TP-LINK TL-WR941N/ND v6 (CN)
- BOARDNAME := TL-WDR3500
- DEVICE_PROFILE := TLWR941
- TPLINK_HWID := 0x09410006
-endef
-TARGET_DEVICES += tl-wr941nd-v6-cn
diff --git a/target/linux/ar71xx/image/tiny.mk b/target/linux/ar71xx/image/tiny.mk
deleted file mode 100644
index f89d9df83c..0000000000
--- a/target/linux/ar71xx/image/tiny.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-define Build/mkbuffaloimg
- $(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
- -R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
- -K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \
- -i $@ -o $@.new
- mv $@.new $@
-endef
-
-
-define Device/bhr-4grv2
- DEVICE_TITLE := Buffalo BHR-4GRV2
- BOARDNAME := BHR-4GRV2
- ROOTFS_SIZE := 14528k
- KERNEL_SIZE := 1472k
- IMAGE_SIZE := 16000k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
- IMAGES := sysupgrade.bin factory.bin
- IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg
-endef
-
-define Device/zbt-we1526
- DEVICE_TITLE := Zbtlink ZBT-WE1526
- DEVICE_PACKAGES := kmod-usb2
- BOARDNAME := ZBT-WE1526
- IMAGE_SIZE := 16000k
- KERNEL_SIZE := 1472k
- ROOTFS_SIZE := 14528k
- MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
- IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
-endef
diff --git a/target/linux/ar71xx/image/ubinize-nbg6716.ini b/target/linux/ar71xx/image/ubinize-nbg6716.ini
deleted file mode 100644
index 814b0fbcc8..0000000000
--- a/target/linux/ar71xx/image/ubinize-nbg6716.ini
+++ /dev/null
@@ -1,24 +0,0 @@
-[rootfs]
-# Volume mode (other option is static)
-mode=ubi
-# Source image
-image=ubi_root.img
-# Volume ID in UBI image
-vol_id=0
-# Allow for dynamic resize
-vol_type=dynamic
-# Volume name
-vol_name=rootfs
-
-[rootfs_data]
-# Volume mode (other option is static)
-mode=ubi
-# Volume ID in UBI image
-vol_id=1
-# Allow for dynamic resize
-vol_type=dynamic
-# Volume name
-vol_name=rootfs_data
-# Autoresize volume at first mount
-vol_size=1MiB
-vol_flags=autoresize
diff --git a/target/linux/ar71xx/image/ubinize-wndr4300.ini b/target/linux/ar71xx/image/ubinize-wndr4300.ini
deleted file mode 100644
index 5bff906ae8..0000000000
--- a/target/linux/ar71xx/image/ubinize-wndr4300.ini
+++ /dev/null
@@ -1,26 +0,0 @@
-[rootfs]
-# Volume mode (other option is static)
-mode=ubi
-# Source image
-image=root.squashfs
-# Volume ID in UBI image
-vol_id=0
-# Allow for dynamic resize
-vol_type=dynamic
-# Volume name
-vol_name=rootfs
-# Autoresize volume at first mount
-# vol_flags=autoresize
-
-[rootfs_data]
-# Volume mode (other option is static)
-mode=ubi
-# Volume ID in UBI image
-vol_id=1
-# Allow for dynamic resize
-vol_type=dynamic
-# Volume name
-vol_name=rootfs_data
-# Autoresize volume at first mount
-vol_flags=autoresize
-vol_size=1MiB
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
deleted file mode 100644
index eb2f362034..0000000000
--- a/target/linux/ar71xx/mikrotik/config-default
+++ /dev/null
@@ -1,79 +0,0 @@
-CONFIG_ATH79_DEV_AP9X_PCI=y
-CONFIG_ATH79_DEV_ETH=y
-CONFIG_ATH79_DEV_GPIO_BUTTONS=y
-CONFIG_ATH79_DEV_LEDS_GPIO=y
-CONFIG_ATH79_DEV_M25P80=y
-CONFIG_ATH79_DEV_NFC=y
-CONFIG_ATH79_DEV_SPI=y
-CONFIG_ATH79_DEV_USB=y
-CONFIG_ATH79_DEV_WMAC=y
-CONFIG_ATH79_MACH_RB2011=y
-CONFIG_ATH79_MACH_RB4XX=y
-CONFIG_ATH79_MACH_RB750=y
-CONFIG_ATH79_MACH_RB91X=y
-CONFIG_ATH79_MACH_RB922=y
-CONFIG_ATH79_MACH_RB95X=y
-CONFIG_ATH79_MACH_RBSPI=y
-CONFIG_ATH79_MACH_RBSXTLITE=y
-CONFIG_ATH79_PCI_ATH9K_FIXUP=y
-CONFIG_ATH79_ROUTERBOOT=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_GPIO_LATCH=y
-CONFIG_HW_HAS_PCI=y
-# CONFIG_INTEL_XWAY_PHY is not set
-CONFIG_LEDS_RB750=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MARVELL_PHY is not set
-CONFIG_MIKROTIK=y
-CONFIG_MIKROTIK_RB_SYSFS=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_CYBERTAN_PARTS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MYLOADER_PARTS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_AR934X=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_RB4XX=y
-CONFIG_MTD_NAND_RB750=y
-CONFIG_MTD_NAND_RB91X=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-# CONFIG_MTD_SPLIT_EVA_FW is not set
-# CONFIG_MTD_SPLIT_LZMA_FW is not set
-# CONFIG_MTD_SPLIT_SEAMA_FW is not set
-# CONFIG_MTD_SPLIT_TPLINK_FW is not set
-# CONFIG_MTD_SPLIT_UIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_WRGG_FW is not set
-# CONFIG_MTD_TPLINK_PARTS is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-# CONFIG_NET_DSA is not set
-CONFIG_PCI=y
-CONFIG_PCI_AR724X=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_RLE_DECOMPRESS=y
-# CONFIG_RTL8306_PHY is not set
-# CONFIG_RTL8366_SMI is not set
-CONFIG_SOC_AR71XX=y
-CONFIG_SOC_AR724X=y
-CONFIG_SOC_AR934X=y
-CONFIG_SOC_QCA953X=y
-CONFIG_SOC_QCA955X=y
-CONFIG_SPI_RB4XX=y
-CONFIG_SPI_RB4XX_CPLD=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-# CONFIG_UBIFS_FS_LZO is not set
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/ar71xx/mikrotik/profiles/00-default.mk b/target/linux/ar71xx/mikrotik/profiles/00-default.mk
deleted file mode 100644
index 1dfc62dbb3..0000000000
--- a/target/linux/ar71xx/mikrotik/profiles/00-default.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Copyright (C) 2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Default
- NAME:=Default Profile
- PACKAGES:= \
- kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport nand-utils
- PRIORITY := 1
-endef
-
-define Profile/Default/Description
- Default package set compatible with most boards.
-endef
-$(eval $(call Profile,Default))
diff --git a/target/linux/ar71xx/mikrotik/target.mk b/target/linux/ar71xx/mikrotik/target.mk
deleted file mode 100644
index 5ae57fadb3..0000000000
--- a/target/linux/ar71xx/mikrotik/target.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-BOARDNAME:=Mikrotik devices with NAND/NOR flash
-FEATURES += squashfs ramdisk minor nand
-
-DEFAULT_PACKAGES += nand-utils wpad-basic
-
-define Target/Description
- Build firmware images for Atheros AR71xx/AR913x based Mikrotik boards.
- e.g. MikroTik RB-4xx or RB-750
-endef
-
-
diff --git a/target/linux/ar71xx/modules.mk b/target/linux/ar71xx/modules.mk
deleted file mode 100644
index 9ead8b451c..0000000000
--- a/target/linux/ar71xx/modules.mk
+++ /dev/null
@@ -1,69 +0,0 @@
-#
-# Copyright (C) 2006-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define KernelPackage/leds-nu801
- SUBMENU:=$(LEDS_MENU)
- TITLE:=Meraki MR18 LED support
- DEPENDS:=@TARGET_ar71xx
- KCONFIG:=CONFIG_LEDS_NU801
- FILES:=$(LINUX_DIR)/drivers/leds/leds-nu801.ko
- AUTOLOAD:=$(call AutoLoad,60,leds-nu801)
-endef
-
-define KernelPackage/leds-nu801/description
- Kernel module for the nu801 LED driver used on the Meraki MR18.
-endef
-
-$(eval $(call KernelPackage,leds-nu801))
-
-
-define KernelPackage/leds-rb750
- SUBMENU:=$(LEDS_MENU)
- TITLE:=RouterBOARD 750 LED support
- DEPENDS:=@TARGET_ar71xx
- KCONFIG:=CONFIG_LEDS_RB750
- FILES:=$(LINUX_DIR)/drivers/leds/leds-rb750.ko
- AUTOLOAD:=$(call AutoLoad,60,leds-rb750)
-endef
-
-define KernelPackage/leds-rb750/description
- Kernel module for the LEDs on the MikroTik RouterBOARD 750.
-endef
-
-$(eval $(call KernelPackage,leds-rb750))
-
-
-define KernelPackage/leds-wndr3700-usb
- SUBMENU:=$(LEDS_MENU)
- TITLE:=WNDR3700 USB LED support
- DEPENDS:=@TARGET_ar71xx
- KCONFIG:=CONFIG_LEDS_WNDR3700_USB
- FILES:=$(LINUX_DIR)/drivers/leds/leds-wndr3700-usb.ko
- AUTOLOAD:=$(call AutoLoad,60,leds-wndr3700-usb)
-endef
-
-define KernelPackage/leds-wndr3700-usb/description
- Kernel module for the USB LED on the NETGEAR WNDR3700 board.
-endef
-
-$(eval $(call KernelPackage,leds-wndr3700-usb))
-
-
-define KernelPackage/spi-vsc7385
- SUBMENU:=$(SPI_MENU)
- TITLE:=Vitesse VSC7385 ethernet switch driver
- DEPENDS:=@TARGET_ar71xx
- KCONFIG:=CONFIG_SPI_VSC7385
- FILES:=$(LINUX_DIR)/drivers/spi/spi-vsc7385.ko
- AUTOLOAD:=$(call AutoLoad,93,spi-vsc7385)
-endef
-
-define KernelPackage/spi-vsc7385/description
- This package contains the SPI driver for the Vitesse VSC7385 ethernet switch.
-endef
-
-$(eval $(call KernelPackage,spi-vsc7385))
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
deleted file mode 100644
index 39b1ca4995..0000000000
--- a/target/linux/ar71xx/nand/config-default
+++ /dev/null
@@ -1,70 +0,0 @@
-CONFIG_ATH79_DEV_AP9X_PCI=y
-CONFIG_ATH79_DEV_ETH=y
-CONFIG_ATH79_DEV_GPIO_BUTTONS=y
-CONFIG_ATH79_DEV_LEDS_GPIO=y
-CONFIG_ATH79_DEV_M25P80=y
-CONFIG_ATH79_DEV_NFC=y
-CONFIG_ATH79_DEV_SPI=y
-CONFIG_ATH79_DEV_USB=y
-CONFIG_ATH79_DEV_WMAC=y
-CONFIG_ATH79_MACH_C60=y
-CONFIG_ATH79_MACH_DOMYWIFI_DW33D=y
-CONFIG_ATH79_MACH_HIVEAP_121=y
-CONFIG_ATH79_MACH_MR18=y
-CONFIG_ATH79_MACH_NBG6716=y
-CONFIG_ATH79_MACH_R6100=y
-CONFIG_ATH79_MACH_RAMBUTAN=y
-CONFIG_ATH79_MACH_WI2A_AC200I=y
-CONFIG_ATH79_MACH_WNDR4300=y
-CONFIG_ATH79_MACH_Z1=y
-CONFIG_ATH79_NVRAM=y
-CONFIG_ATH79_PCI_ATH9K_FIXUP=y
-CONFIG_BCH=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_HW_HAS_PCI=y
-# CONFIG_INTEL_XWAY_PHY is not set
-# CONFIG_IP17XX_PHY is not set
-CONFIG_LEDS_NU801=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CFI_I2=y
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MYLOADER_PARTS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_AR934X=y
-CONFIG_MTD_NAND_AR934X_HW_ECC=y
-CONFIG_MTD_NAND_BCH=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_BCH=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_SPLIT_EVA_FW is not set
-# CONFIG_MTD_SPLIT_SEAMA_FW is not set
-# CONFIG_MTD_SPLIT_TPLINK_FW is not set
-# CONFIG_MTD_TPLINK_PARTS is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_PCI=y
-CONFIG_PCI_AR724X=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_RTL8306_PHY is not set
-# CONFIG_RTL8366_SMI is not set
-CONFIG_SOC_AR934X=y
-CONFIG_SOC_QCA955X=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/ar71xx/nand/profiles/00-default.mk b/target/linux/ar71xx/nand/profiles/00-default.mk
deleted file mode 100644
index 6e618113a5..0000000000
--- a/target/linux/ar71xx/nand/profiles/00-default.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Copyright (C) 2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Default
- NAME:=Default Profile
- PACKAGES:= \
- kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
- PRIORITY := 1
-endef
-
-define Profile/Default/Description
- Default package set compatible with most boards.
-endef
-$(eval $(call Profile,Default))
diff --git a/target/linux/ar71xx/nand/target.mk b/target/linux/ar71xx/nand/target.mk
deleted file mode 100644
index d5191b2260..0000000000
--- a/target/linux/ar71xx/nand/target.mk
+++ /dev/null
@@ -1,9 +0,0 @@
-BOARDNAME := Generic devices with NAND flash
-FEATURES += squashfs nand rtc
-
-DEFAULT_PACKAGES += wpad-basic
-
-define Target/Description
- Build firmware images for Atheros AR71xx/AR913x based boards with
- NAND flash, e.g. Netgear WNDR4300.
-endef
diff --git a/target/linux/ar71xx/patches-4.14/001-spi-cs-gpio.patch b/target/linux/ar71xx/patches-4.14/001-spi-cs-gpio.patch
deleted file mode 100644
index 7a0b669e43..0000000000
--- a/target/linux/ar71xx/patches-4.14/001-spi-cs-gpio.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-@@ -14,6 +14,7 @@
- struct ath79_spi_platform_data {
- unsigned bus_num;
- unsigned num_chipselect;
-+ int *cs_gpios;
- };
-
- #endif /* _ATH79_SPI_PLATFORM_H */
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -231,6 +231,7 @@ static int ath79_spi_probe(struct platfo
- if (pdata) {
- master->bus_num = pdata->bus_num;
- master->num_chipselect = pdata->num_chipselect;
-+ master->cs_gpios = pdata->cs_gpios;
- }
-
- sp->bitbang.master = master;
diff --git a/target/linux/ar71xx/patches-4.14/002-add_back_gpio_function_select.patch b/target/linux/ar71xx/patches-4.14/002-add_back_gpio_function_select.patch
deleted file mode 100644
index 5b26a640eb..0000000000
--- a/target/linux/ar71xx/patches-4.14/002-add_back_gpio_function_select.patch
+++ /dev/null
@@ -1,92 +0,0 @@
---- /dev/null
-+++ b/arch/mips/ath79/gpio.c
-@@ -0,0 +1,59 @@
-+/*
-+ * Atheros AR71XX/AR724X/AR913X GPIO API support
-+ *
-+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
-+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/io.h>
-+#include <linux/gpio.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+#include <asm/mach-ath79/ath79.h>
-+#include "common.h"
-+
-+void __iomem *ath79_gpio_base;
-+EXPORT_SYMBOL_GPL(ath79_gpio_base);
-+
-+static void __iomem *ath79_gpio_get_function_reg(void)
-+{
-+ u32 reg = 0;
-+
-+ if (soc_is_ar71xx() ||
-+ soc_is_ar724x() ||
-+ soc_is_ar913x() ||
-+ soc_is_ar933x())
-+ reg = AR71XX_GPIO_REG_FUNC;
-+ else if (soc_is_ar934x())
-+ reg = AR934X_GPIO_REG_FUNC;
-+ else
-+ BUG();
-+
-+ return ath79_gpio_base + reg;
-+}
-+
-+void ath79_gpio_function_setup(u32 set, u32 clear)
-+{
-+ void __iomem *reg = ath79_gpio_get_function_reg();
-+
-+ __raw_writel((__raw_readl(reg) & ~clear) | set, reg);
-+ /* flush write */
-+ __raw_readl(reg);
-+}
-+
-+void ath79_gpio_function_enable(u32 mask)
-+{
-+ ath79_gpio_function_setup(mask, 0);
-+}
-+
-+void ath79_gpio_function_disable(u32 mask)
-+{
-+ ath79_gpio_function_setup(0, mask);
-+}
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -118,6 +118,7 @@ static inline int soc_is_qca955x(void)
- void ath79_ddr_wb_flush(unsigned int reg);
- void ath79_ddr_set_pci_windows(void);
-
-+extern void __iomem *ath79_gpio_base;
- extern void __iomem *ath79_pll_base;
- extern void __iomem *ath79_reset_base;
-
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -156,4 +156,5 @@ void __init ath79_gpio_init(void)
- }
-
- platform_device_register(&ath79_gpio_device);
-+ ath79_gpio_base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
- }
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -24,6 +24,9 @@ unsigned long ath79_get_sys_clk_rate(con
-
- void ath79_ddr_ctrl_init(void);
-
-+void ath79_gpio_function_enable(u32 mask);
-+void ath79_gpio_function_disable(u32 mask);
-+void ath79_gpio_function_setup(u32 set, u32 clear);
- void ath79_gpio_init(void);
-
- #endif /* __ATH79_COMMON_H */
diff --git a/target/linux/ar71xx/patches-4.14/004-register_gpio_driver_earlier.patch b/target/linux/ar71xx/patches-4.14/004-register_gpio_driver_earlier.patch
deleted file mode 100644
index cc30e2d91e..0000000000
--- a/target/linux/ar71xx/patches-4.14/004-register_gpio_driver_earlier.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-HACK: register the GPIO driver earlier to ensure that gpio_request calls
-from mach files succeed.
-
---- a/drivers/gpio/gpio-ath79.c
-+++ b/drivers/gpio/gpio-ath79.c
-@@ -322,7 +322,11 @@ static struct platform_driver ath79_gpio
- .remove = ath79_gpio_remove,
- };
-
--module_platform_driver(ath79_gpio_driver);
-+static int __init ath79_gpio_init(void)
-+{
-+ return platform_driver_register(&ath79_gpio_driver);
-+}
-+postcore_initcall(ath79_gpio_init);
-
- MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
- MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ar71xx/patches-4.14/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch b/target/linux/ar71xx/patches-4.14/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch
deleted file mode 100644
index 8d5b089986..0000000000
--- a/target/linux/ar71xx/patches-4.14/100-MIPS-ath79-Avoid-using-unitialized-reg-variable.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 8b7a76e72fc819753878cd5684e243f33f847c79 Mon Sep 17 00:00:00 2001
-From: Markos Chandras <markos.chandras@imgtec.com>
-Date: Wed, 21 Aug 2013 11:47:22 +0100
-Subject: [PATCH] MIPS: ath79: Avoid using unitialized 'reg' variable
-
-Fixes the following build error:
-arch/mips/include/asm/mach-ath79/ath79.h:139:20: error: 'reg' may be used
-uninitialized in this function [-Werror=maybe-uninitialized]
-arch/mips/ath79/common.c:62:6: note: 'reg' was declared here
-In file included from arch/mips/ath79/common.c:20:0:
-arch/mips/ath79/common.c: In function 'ath79_device_reset_clear':
-arch/mips/include/asm/mach-ath79/ath79.h:139:20:
-error: 'reg' may be used uninitialized in this function
-[-Werror=maybe-uninitialized]
-arch/mips/ath79/common.c:90:6: note: 'reg' was declared here
-
-Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
-Acked-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/ath79/common.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -106,7 +106,7 @@ void ath79_device_reset_set(u32 mask)
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
-- BUG();
-+ panic("Reset register not defined for this SOC");
-
- spin_lock_irqsave(&ath79_device_reset_lock, flags);
- t = ath79_reset_rr(reg);
-@@ -134,7 +134,7 @@ void ath79_device_reset_clear(u32 mask)
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
-- BUG();
-+ panic("Reset register not defined for this SOC");
-
- spin_lock_irqsave(&ath79_device_reset_lock, flags);
- t = ath79_reset_rr(reg);
diff --git a/target/linux/ar71xx/patches-4.14/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch b/target/linux/ar71xx/patches-4.14/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch
deleted file mode 100644
index 3af99bf3b5..0000000000
--- a/target/linux/ar71xx/patches-4.14/106-02-MIPS-ath79-do-AR724x-PCIe-root-complex-init.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From 460f382c278fe66059a773c41cbcd0db86d53983 Mon Sep 17 00:00:00 2001
-From: Mathias Kresin <dev@kresin.me>
-Date: Thu, 13 Apr 2017 09:47:42 +0200
-Subject: [PATCH] MIPS: pci-ar724x: get PCIe controller out of reset
-
-The ar724x pci driver expects the PCIe controller to be brought out of
-reset by the bootloader.
-
-At least the AVM Fritz 300E bootloader doesn't take care of releasing
-the different PCIe controller related resets which causes an endless
-hang as soon as either the PCIE Reset register (0x180f0018) or the PCI
-Application Control register (0x180f0000) is read from.
-
-Do the full "PCIE Root Complex Initialization Sequence" if the PCIe
-host controller is still in reset during probing.
-
-The QCA u-boot sleeps 10ms after the PCIE Application Control bit is
-set to ready. It has been shown that 10ms might not be enough time if
-PCIe should be used right after setting the bit. During my tests it
-took up to 20ms till the link was up. Giving the link up to 100ms
-should work for all cases.
-
-Signed-off-by: Mathias Kresin <dev@kresin.me>
----
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 3 ++
- arch/mips/pci/pci-ar724x.c | 42 ++++++++++++++++++++++++++
- 2 files changed, 45 insertions(+)
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -169,6 +169,9 @@
- #define AR724X_PLL_REG_CPU_CONFIG 0x00
- #define AR724X_PLL_REG_PCIE_CONFIG 0x10
-
-+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS BIT(16)
-+#define AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET BIT(25)
-+
- #define AR724X_PLL_FB_SHIFT 0
- #define AR724X_PLL_FB_MASK 0x3ff
- #define AR724X_PLL_REF_DIV_SHIFT 10
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -12,14 +12,18 @@
- #include <linux/irq.h>
- #include <linux/pci.h>
- #include <linux/init.h>
-+#include <linux/delay.h>
- #include <linux/platform_device.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-
-+#define AR724X_PCI_REG_APP 0x0
- #define AR724X_PCI_REG_RESET 0x18
- #define AR724X_PCI_REG_INT_STATUS 0x4c
- #define AR724X_PCI_REG_INT_MASK 0x50
-
-+#define AR724X_PCI_APP_LTSSM_ENABLE BIT(0)
-+
- #define AR724X_PCI_RESET_LINK_UP BIT(0)
-
- #define AR724X_PCI_INT_DEV0 BIT(14)
-@@ -325,6 +329,37 @@ static void ar724x_pci_irq_init(struct a
- apc);
- }
-
-+static void ar724x_pci_hw_init(struct ar724x_pci_controller *apc)
-+{
-+ u32 ppl, app;
-+ int wait = 0;
-+
-+ /* deassert PCIe host controller and PCIe PHY reset */
-+ ath79_device_reset_clear(AR724X_RESET_PCIE);
-+ ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
-+
-+ /* remove the reset of the PCIE PLL */
-+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
-+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+
-+ /* deassert bypass for the PCIE PLL */
-+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
-+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+
-+ /* set PCIE Application Control to ready */
-+ app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
-+ app |= AR724X_PCI_APP_LTSSM_ENABLE;
-+ __raw_writel(app, apc->ctrl_base + AR724X_PCI_REG_APP);
-+
-+ /* wait up to 100ms for PHY link up */
-+ do {
-+ mdelay(10);
-+ wait++;
-+ } while (wait < 10 && !ar724x_pci_check_link(apc));
-+}
-+
- static int ar724x_pci_probe(struct platform_device *pdev)
- {
- struct ar724x_pci_controller *apc;
-@@ -383,6 +418,13 @@ static int ar724x_pci_probe(struct platf
- apc->pci_controller.io_resource = &apc->io_res;
- apc->pci_controller.mem_resource = &apc->mem_res;
-
-+ /*
-+ * Do the full PCIE Root Complex Initialization Sequence if the PCIe
-+ * host controller is in reset.
-+ */
-+ if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
-+ ar724x_pci_hw_init(apc);
-+
- apc->link_up = ar724x_pci_check_link(apc);
- if (!apc->link_up)
- dev_warn(&pdev->dev, "PCIe link is down\n");
diff --git a/target/linux/ar71xx/patches-4.14/200-MIPS-ath79-fix-ar933x-wmac-reset.patch b/target/linux/ar71xx/patches-4.14/200-MIPS-ath79-fix-ar933x-wmac-reset.patch
deleted file mode 100644
index b7ae0ce649..0000000000
--- a/target/linux/ar71xx/patches-4.14/200-MIPS-ath79-fix-ar933x-wmac-reset.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -62,10 +62,26 @@ static void __init ar913x_wmac_setup(voi
-
- static int ar933x_wmac_reset(void)
- {
-+ int retries = 20;
-+
- ath79_device_reset_set(AR933X_RESET_WMAC);
- ath79_device_reset_clear(AR933X_RESET_WMAC);
-
-- return 0;
-+ while (1) {
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-+ if ((bootstrap & AR933X_BOOTSTRAP_EEPBUSY) == 0)
-+ return 0;
-+
-+ if (retries-- == 0)
-+ break;
-+
-+ udelay(10000);
-+ }
-+
-+ pr_err("ar933x: WMAC reset timed out");
-+ return -ETIMEDOUT;
- }
-
- static int ar933x_r1_get_wmac_revision(void)
diff --git a/target/linux/ar71xx/patches-4.14/201-ar913x_wmac_external_reset.patch b/target/linux/ar71xx/patches-4.14/201-ar913x_wmac_external_reset.patch
deleted file mode 100644
index 9b704a3c47..0000000000
--- a/target/linux/ar71xx/patches-4.14/201-ar913x_wmac_external_reset.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -44,7 +44,7 @@ static struct platform_device ath79_wmac
- },
- };
-
--static void __init ar913x_wmac_setup(void)
-+static int ar913x_wmac_reset(void)
- {
- /* reset the WMAC */
- ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
-@@ -53,10 +53,19 @@ static void __init ar913x_wmac_setup(voi
- ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
- mdelay(10);
-
-+ return 0;
-+}
-+
-+static void __init ar913x_wmac_setup(void)
-+{
-+ ar913x_wmac_reset();
-+
- ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
- ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
-+
-+ ath79_wmac_data.external_reset = ar913x_wmac_reset;
- }
-
-
diff --git a/target/linux/ar71xx/patches-4.14/202-MIPS-ath79-ar934x-wmac-revision.patch b/target/linux/ar71xx/patches-4.14/202-MIPS-ath79-ar934x-wmac-revision.patch
deleted file mode 100644
index 0f8016f847..0000000000
--- a/target/linux/ar71xx/patches-4.14/202-MIPS-ath79-ar934x-wmac-revision.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -139,6 +139,8 @@ static void ar934x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = false;
- else
- ath79_wmac_data.is_clk_25mhz = true;
-+
-+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
- }
-
- static void qca955x_wmac_setup(void)
diff --git a/target/linux/ar71xx/patches-4.14/220-add_cpu_feature_overrides.patch b/target/linux/ar71xx/patches-4.14/220-add_cpu_feature_overrides.patch
deleted file mode 100644
index d925f92624..0000000000
--- a/target/linux/ar71xx/patches-4.14/220-add_cpu_feature_overrides.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-ath79/cpu-feature-overrides.h
-@@ -36,6 +36,7 @@
- #define cpu_has_mdmx 0
- #define cpu_has_mips3d 0
- #define cpu_has_smartmips 0
-+#define cpu_has_rixi 0
-
- #define cpu_has_mips32r1 1
- #define cpu_has_mips32r2 1
-@@ -43,6 +44,7 @@
- #define cpu_has_mips64r2 0
-
- #define cpu_has_mipsmt 0
-+#define cpu_has_userlocal 0
-
- #define cpu_has_64bits 0
- #define cpu_has_64bit_zero_reg 0
-@@ -51,5 +53,9 @@
-
- #define cpu_dcache_line_size() 32
- #define cpu_icache_line_size() 32
-+#define cpu_has_vtag_icache 0
-+#define cpu_has_dc_aliases 1
-+#define cpu_has_ic_fills_f_dc 0
-+#define cpu_has_pindexed_dcache 0
-
- #endif /* __ASM_MACH_ATH79_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/ar71xx/patches-4.14/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch b/target/linux/ar71xx/patches-4.14/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch
deleted file mode 100644
index 0bc64b7a17..0000000000
--- a/target/linux/ar71xx/patches-4.14/300-MIPS-add-MIPS_MACHINE_NONAME-macro.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/arch/mips/include/asm/mips_machine.h
-+++ b/arch/mips/include/asm/mips_machine.h
-@@ -36,6 +36,18 @@ static struct mips_machine machine_##_ty
- .mach_setup = _setup, \
- };
-
-+#define MIPS_MACHINE_NONAME(_type, _id, _setup) \
-+static const char machine_id_##_type[] __initconst \
-+ __aligned(1) = _id; \
-+static struct mips_machine machine_##_type \
-+ __used __section(.mips.machines.init) = \
-+{ \
-+ .mach_type = _type, \
-+ .mach_id = machine_id_##_type, \
-+ .mach_name = NULL, \
-+ .mach_setup = _setup, \
-+};
-+
- extern long __mips_machines_start;
- extern long __mips_machines_end;
-
diff --git a/target/linux/ar71xx/patches-4.14/310-lib-add-rle-decompression.patch b/target/linux/ar71xx/patches-4.14/310-lib-add-rle-decompression.patch
deleted file mode 100644
index 727f4d8343..0000000000
--- a/target/linux/ar71xx/patches-4.14/310-lib-add-rle-decompression.patch
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -265,6 +265,9 @@ config LZMA_COMPRESS
- config LZMA_DECOMPRESS
- tristate
-
-+config RLE_DECOMPRESS
-+ tristate
-+
- #
- # These all provide a common interface (hence the apparent duplication with
- # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
---- a/lib/Makefile
-+++ b/lib/Makefile
-@@ -146,6 +146,7 @@ obj-$(CONFIG_XZ_DEC) += xz/
- obj-$(CONFIG_RAID6_PQ) += raid6/
- obj-$(CONFIG_LZMA_COMPRESS) += lzma/
- obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
-+obj-$(CONFIG_RLE_DECOMPRESS) += rle.o
-
- lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
- lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
---- /dev/null
-+++ b/include/linux/rle.h
-@@ -0,0 +1,18 @@
-+#ifndef _RLE_H_
-+#define _RLE_H_
-+
-+#ifdef CONFIG_RLE_DECOMPRESS
-+int rle_decode(const unsigned char *src, size_t srclen,
-+ unsigned char *dst, size_t dstlen,
-+ size_t *src_done, size_t *dst_done);
-+#else
-+static inline int
-+rle_decode(const unsigned char *src, size_t srclen,
-+ unsigned char *dst, size_t dstlen,
-+ size_t *src_done, size_t *dst_done)
-+{
-+ return -ENOTSUPP;
-+}
-+#endif /* CONFIG_RLE_DECOMPRESS */
-+
-+#endif /* _RLE_H_ */
---- /dev/null
-+++ b/lib/rle.c
-@@ -0,0 +1,78 @@
-+/*
-+ * RLE decoding routine
-+ *
-+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/rle.h>
-+
-+int rle_decode(const unsigned char *src, size_t srclen,
-+ unsigned char *dst, size_t dstlen,
-+ size_t *src_done, size_t *dst_done)
-+{
-+ size_t srcpos, dstpos;
-+ int ret;
-+
-+ srcpos = 0;
-+ dstpos = 0;
-+ ret = -EINVAL;
-+
-+ /* sanity checks */
-+ if (!src || !srclen || !dst || !dstlen)
-+ goto out;
-+
-+ while (1) {
-+ char count;
-+
-+ if (srcpos >= srclen)
-+ break;
-+
-+ count = (char) src[srcpos++];
-+ if (count == 0) {
-+ ret = 0;
-+ break;
-+ }
-+
-+ if (count > 0) {
-+ unsigned char c;
-+
-+ if (srcpos >= srclen)
-+ break;
-+
-+ c = src[srcpos++];
-+
-+ while (count--) {
-+ if (dstpos >= dstlen)
-+ break;
-+
-+ dst[dstpos++] = c;
-+ }
-+ } else {
-+ count *= -1;
-+
-+ while (count--) {
-+ if (srcpos >= srclen)
-+ break;
-+ if (dstpos >= dstlen)
-+ break;
-+ dst[dstpos++] = src[srcpos++];
-+ }
-+ }
-+ }
-+
-+out:
-+ if (src_done)
-+ *src_done = srcpos;
-+ if (dst_done)
-+ *dst_done = dstpos;
-+
-+ return ret;
-+}
-+
-+EXPORT_SYMBOL_GPL(rle_decode);
diff --git a/target/linux/ar71xx/patches-4.14/343-MIPS-ath79-Fix-potentially-missed-IRQ-handling-durin.patch b/target/linux/ar71xx/patches-4.14/343-MIPS-ath79-Fix-potentially-missed-IRQ-handling-durin.patch
deleted file mode 100644
index 05a1d7ef0c..0000000000
--- a/target/linux/ar71xx/patches-4.14/343-MIPS-ath79-Fix-potentially-missed-IRQ-handling-durin.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 3fe7841bf5a582dc7fd198e5bf70162ea418a22a Mon Sep 17 00:00:00 2001
-From: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Date: Wed, 11 Sep 2019 11:02:19 +0200
-Subject: [PATCH] MIPS: ath79: Fix potentially missed IRQ handling during
- dispatch
-
-If both interrupts are set in the current implementation
-only the 1st will be handled and the 2nd will be skipped
-due to the "if else" condition.
-
-Fix this by using the same approach as done for QCA955x
-just below it.
-
-Fixes: fce5cc6e0ddc ("MIPS: ath79: add IRQ handling code for AR934X")
-Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
-CC: Felix Fietkau <nbd@nbd.name>
-CC: Gabor Juhos <juhosg@freemail.hu>
-CC: James Hogan <jhogan@kernel.org>
-CC: Paul Burton <paul.burton@mips.com>
-CC: Ralf Baechle <ralf@linux-mips.org>
-CC: stable@vger.kernel.org # v3.2+
----
- arch/mips/ath79/irq.c | 12 +++++++++---
- 1 file changed, 9 insertions(+), 3 deletions(-)
-
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -32,15 +32,21 @@ static void ar934x_ip2_irq_dispatch(stru
- u32 status;
-
- status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
-+ status &= AR934X_PCIE_WMAC_INT_PCIE_ALL | AR934X_PCIE_WMAC_INT_WMAC_ALL;
-+
-+ if (status == 0) {
-+ spurious_interrupt();
-+ return;
-+ }
-
- if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
- ath79_ddr_wb_flush(3);
- generic_handle_irq(ATH79_IP2_IRQ(0));
-- } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
-+ }
-+
-+ if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
- ath79_ddr_wb_flush(4);
- generic_handle_irq(ATH79_IP2_IRQ(1));
-- } else {
-- spurious_interrupt();
- }
- }
-
diff --git a/target/linux/ar71xx/patches-4.14/401-mtd-physmap-add-lock-unlock.patch b/target/linux/ar71xx/patches-4.14/401-mtd-physmap-add-lock-unlock.patch
deleted file mode 100644
index db7b3ca83d..0000000000
--- a/target/linux/ar71xx/patches-4.14/401-mtd-physmap-add-lock-unlock.patch
+++ /dev/null
@@ -1,94 +0,0 @@
---- a/drivers/mtd/maps/physmap.c
-+++ b/drivers/mtd/maps/physmap.c
-@@ -31,6 +31,66 @@ struct physmap_flash_info {
- int vpp_refcnt;
- };
-
-+static struct platform_device *physmap_map2pdev(struct map_info *map)
-+{
-+ return (struct platform_device *) map->map_priv_1;
-+}
-+
-+static void physmap_lock(struct map_info *map)
-+{
-+ struct platform_device *pdev;
-+ struct physmap_flash_data *physmap_data;
-+
-+ pdev = physmap_map2pdev(map);
-+ physmap_data = pdev->dev.platform_data;
-+ physmap_data->lock(pdev);
-+}
-+
-+static void physmap_unlock(struct map_info *map)
-+{
-+ struct platform_device *pdev;
-+ struct physmap_flash_data *physmap_data;
-+
-+ pdev = physmap_map2pdev(map);
-+ physmap_data = pdev->dev.platform_data;
-+ physmap_data->unlock(pdev);
-+}
-+
-+static map_word physmap_flash_read_lock(struct map_info *map, unsigned long ofs)
-+{
-+ map_word ret;
-+
-+ physmap_lock(map);
-+ ret = inline_map_read(map, ofs);
-+ physmap_unlock(map);
-+
-+ return ret;
-+}
-+
-+static void physmap_flash_write_lock(struct map_info *map, map_word d,
-+ unsigned long ofs)
-+{
-+ physmap_lock(map);
-+ inline_map_write(map, d, ofs);
-+ physmap_unlock(map);
-+}
-+
-+static void physmap_flash_copy_from_lock(struct map_info *map, void *to,
-+ unsigned long from, ssize_t len)
-+{
-+ physmap_lock(map);
-+ inline_map_copy_from(map, to, from, len);
-+ physmap_unlock(map);
-+}
-+
-+static void physmap_flash_copy_to_lock(struct map_info *map, unsigned long to,
-+ const void *from, ssize_t len)
-+{
-+ physmap_lock(map);
-+ inline_map_copy_to(map, to, from, len);
-+ physmap_unlock(map);
-+}
-+
- static int physmap_flash_remove(struct platform_device *dev)
- {
- struct physmap_flash_info *info;
-@@ -153,6 +213,13 @@ static int physmap_flash_probe(struct pl
-
- simple_map_init(&info->map[i]);
-
-+ if (physmap_data->lock && physmap_data->unlock) {
-+ info->map[i].read = physmap_flash_read_lock;
-+ info->map[i].write = physmap_flash_write_lock;
-+ info->map[i].copy_from = physmap_flash_copy_from_lock;
-+ info->map[i].copy_to = physmap_flash_copy_to_lock;
-+ }
-+
- probe_type = rom_probe_types;
- if (physmap_data->probe_type == NULL) {
- for (; info->mtd[i] == NULL && *probe_type != NULL; probe_type++)
---- a/include/linux/mtd/physmap.h
-+++ b/include/linux/mtd/physmap.h
-@@ -25,6 +25,8 @@ struct physmap_flash_data {
- unsigned int width;
- int (*init)(struct platform_device *);
- void (*exit)(struct platform_device *);
-+ void (*lock)(struct platform_device *);
-+ void (*unlock)(struct platform_device *);
- void (*set_vpp)(struct platform_device *, int);
- unsigned int nr_parts;
- unsigned int pfow_base;
diff --git a/target/linux/ar71xx/patches-4.14/402-mtd-SST39VF6401B-support.patch b/target/linux/ar71xx/patches-4.14/402-mtd-SST39VF6401B-support.patch
deleted file mode 100644
index 0d483ab1a4..0000000000
--- a/target/linux/ar71xx/patches-4.14/402-mtd-SST39VF6401B-support.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -148,6 +148,7 @@
- #define SST39LF160 0x2782
- #define SST39VF1601 0x234b
- #define SST39VF3201 0x235b
-+#define SST39VF6401B 0x236d
- #define SST39WF1601 0x274b
- #define SST39WF1602 0x274a
- #define SST39LF512 0x00D4
-@@ -1569,6 +1570,18 @@ static const struct amd_flash_info jedec
- ERASEINFO(0x10000,64),
- }
- }, {
-+ .mfr_id = CFI_MFR_SST,
-+ .dev_id = SST39VF6401B,
-+ .name = "SST 39VF6401B",
-+ .devtypes = CFI_DEVICETYPE_X16,
-+ .uaddr = MTD_UADDR_0xAAAA_0x5555,
-+ .dev_size = SIZE_8MiB,
-+ .cmd_set = P_ID_AMD_STD,
-+ .nr_regions = 1,
-+ .regions = {
-+ ERASEINFO(0x10000,128)
-+ }
-+ }, {
- .mfr_id = CFI_MFR_ST,
- .dev_id = M29F800AB,
- .name = "ST M29F800AB",
diff --git a/target/linux/ar71xx/patches-4.14/404-mtd-cybertan-trx-parser.patch b/target/linux/ar71xx/patches-4.14/404-mtd-cybertan-trx-parser.patch
deleted file mode 100644
index 4b59abe16b..0000000000
--- a/target/linux/ar71xx/patches-4.14/404-mtd-cybertan-trx-parser.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -178,6 +178,12 @@ menu "Partition parsers"
- source "drivers/mtd/parsers/Kconfig"
- endmenu
-
-+config MTD_CYBERTAN_PARTS
-+ tristate "Cybertan partitioning support"
-+ depends on ATH79
-+ ---help---
-+ Cybertan partitioning support
-+
- config MTD_MYLOADER_PARTS
- tristate "MyLoader partition parsing"
- depends on ADM5120 || ATH25 || ATH79
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- obj-y += parsers/
-+obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_BLKDEVS) += mtd_blkdevs.o
diff --git a/target/linux/ar71xx/patches-4.14/405-mtd-tp-link-partition-parser.patch b/target/linux/ar71xx/patches-4.14/405-mtd-tp-link-partition-parser.patch
deleted file mode 100644
index 899ab893f0..0000000000
--- a/target/linux/ar71xx/patches-4.14/405-mtd-tp-link-partition-parser.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -200,6 +200,12 @@ config MTD_MYLOADER_PARTS
- You will still need the parsing functions to be called by the driver
- for your particular device. It won't happen automatically.
-
-+config MTD_TPLINK_PARTS
-+ tristate "TP-Link AR7XXX/AR9XXX partitioning support"
-+ depends on ATH79
-+ ---help---
-+ TBD.
-+
- comment "User Modules And Translation Layers"
-
- #
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- obj-y += parsers/
-+obj-$(CONFIG_MTD_TPLINK_PARTS) += tplinkpart.o
- obj-$(CONFIG_MTD_CYBERTAN_PARTS) += cybertan_part.o
-
- # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/ar71xx/patches-4.14/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch b/target/linux/ar71xx/patches-4.14/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
deleted file mode 100644
index 13999064cb..0000000000
--- a/target/linux/ar71xx/patches-4.14/407-mtd-m25p80-allow-to-pass-probe-types-via-platform-data.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -235,6 +235,7 @@ static ssize_t m25p80_read(struct spi_no
- */
- static int m25p_probe(struct spi_device *spi)
- {
-+ struct mtd_part_parser_data ppdata = {0,};
- struct flash_platform_data *data;
- struct m25p *flash;
- struct spi_nor *nor;
-@@ -300,8 +301,11 @@ static int m25p_probe(struct spi_device
- if (ret)
- return ret;
-
-- return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
-- data ? data->nr_parts : 0);
-+ return mtd_device_parse_register(&nor->mtd,
-+ data ? data->part_probes : NULL,
-+ &ppdata,
-+ data ? data->parts : NULL,
-+ data ? data->nr_parts : 0);
- }
-
-
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -25,6 +25,7 @@ struct flash_platform_data {
- unsigned int nr_parts;
-
- char *type;
-+ const char **part_probes;
-
- /* we'll likely add more ... use JEDEC IDs, etc */
- };
diff --git a/target/linux/ar71xx/patches-4.14/408-mtd-redboot_partition_scan.patch b/target/linux/ar71xx/patches-4.14/408-mtd-redboot_partition_scan.patch
deleted file mode 100644
index cd41e7ceb2..0000000000
--- a/target/linux/ar71xx/patches-4.14/408-mtd-redboot_partition_scan.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -76,12 +76,18 @@ static int parse_redboot_partitions(stru
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
- while (mtd_block_isbad(master, offset)) {
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
-@@ -94,10 +100,6 @@ static int parse_redboot_partitions(stru
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
-
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-@@ -170,6 +172,11 @@ static int parse_redboot_partitions(stru
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
diff --git a/target/linux/ar71xx/patches-4.14/409-mtd-rb4xx_nand_driver.patch b/target/linux/ar71xx/patches-4.14/409-mtd-rb4xx_nand_driver.patch
deleted file mode 100644
index c4b26ecb72..0000000000
--- a/target/linux/ar71xx/patches-4.14/409-mtd-rb4xx_nand_driver.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -563,4 +563,8 @@ config MTD_NAND_MTK
- Enables support for NAND controller on MTK SoCs.
- This controller is found on mt27xx, mt81xx, mt65xx SoCs.
-
-+config MTD_NAND_RB4XX
-+ tristate "NAND flash driver for RouterBoard 4xx series"
-+ depends on MTD_NAND && ATH79_MACH_RB4XX
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx27
- obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
- obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o
diff --git a/target/linux/ar71xx/patches-4.14/410-mtd-rb750-nand-driver.patch b/target/linux/ar71xx/patches-4.14/410-mtd-rb750-nand-driver.patch
deleted file mode 100644
index 08960f4358..0000000000
--- a/target/linux/ar71xx/patches-4.14/410-mtd-rb750-nand-driver.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -567,4 +567,8 @@ config MTD_NAND_RB4XX
- tristate "NAND flash driver for RouterBoard 4xx series"
- depends on MTD_NAND && ATH79_MACH_RB4XX
-
-+config MTD_NAND_RB750
-+ tristate "NAND flash driver for the RouterBoard 750"
-+ depends on MTD_NAND && ATH79_MACH_RB750
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -35,6 +35,7 @@ obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx
- obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
-+obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
- obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o
diff --git a/target/linux/ar71xx/patches-4.14/411-mtd-cfi_cmdset_0002-force-word-write.patch b/target/linux/ar71xx/patches-4.14/411-mtd-cfi_cmdset_0002-force-word-write.patch
deleted file mode 100644
index 5a5320968f..0000000000
--- a/target/linux/ar71xx/patches-4.14/411-mtd-cfi_cmdset_0002-force-word-write.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -40,7 +40,7 @@
- #include <linux/mtd/xip.h>
-
- #define AMD_BOOTLOC_BUG
--#define FORCE_WORD_WRITE 0
-+#define FORCE_WORD_WRITE 1
-
- #define MAX_RETRIES 3
-
-@@ -51,7 +51,9 @@
-
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#if !FORCE_WORD_WRITE
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-+#endif
- static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
- static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
- static void cfi_amdstd_sync (struct mtd_info *);
-@@ -202,6 +204,7 @@ static void fixup_amd_bootblock(struct m
- }
- #endif
-
-+#if !FORCE_WORD_WRITE
- static void fixup_use_write_buffers(struct mtd_info *mtd)
- {
- struct map_info *map = mtd->priv;
-@@ -211,6 +214,7 @@ static void fixup_use_write_buffers(stru
- mtd->_write = cfi_amdstd_write_buffers;
- }
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /* Atmel chips don't use the same PRI format as AMD chips */
- static void fixup_convert_atmel_pri(struct mtd_info *mtd)
-@@ -1798,6 +1802,7 @@ static int cfi_amdstd_write_words(struct
- /*
- * FIXME: interleaved mode not tested, and probably not supported!
- */
-+#if !FORCE_WORD_WRITE
- static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
- unsigned long adr, const u_char *buf,
- int len)
-@@ -1930,7 +1935,6 @@ static int __xipram do_write_buffer(stru
- return ret;
- }
-
--
- static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
- size_t *retlen, const u_char *buf)
- {
-@@ -2005,6 +2009,7 @@ static int cfi_amdstd_write_buffers(stru
-
- return 0;
- }
-+#endif /* !FORCE_WORD_WRITE */
-
- /*
- * Wait for the flash chip to become ready to write data
diff --git a/target/linux/ar71xx/patches-4.14/413-mtd-ar934x-nand-driver.patch b/target/linux/ar71xx/patches-4.14/413-mtd-ar934x-nand-driver.patch
deleted file mode 100644
index a2f34f6776..0000000000
--- a/target/linux/ar71xx/patches-4.14/413-mtd-ar934x-nand-driver.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -571,4 +571,12 @@ config MTD_NAND_RB750
- tristate "NAND flash driver for the RouterBoard 750"
- depends on MTD_NAND && ATH79_MACH_RB750
-
-+config MTD_NAND_AR934X
-+ tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
-+ depends on (SOC_AR934X || SOC_QCA955X)
-+
-+config MTD_NAND_AR934X_HW_ECC
-+ bool "Hardware ECC support for the AR934X NAND Controller (EXPERIMENTAL)"
-+ depends on MTD_NAND_AR934X
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-
- obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
- obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o
- obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o
-+obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nfc.o
- obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
- obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
- obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
diff --git a/target/linux/ar71xx/patches-4.14/414-mtd-rb91x-nand-driver.patch b/target/linux/ar71xx/patches-4.14/414-mtd-rb91x-nand-driver.patch
deleted file mode 100644
index f9784a2d13..0000000000
--- a/target/linux/ar71xx/patches-4.14/414-mtd-rb91x-nand-driver.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -571,6 +571,10 @@ config MTD_NAND_RB750
- tristate "NAND flash driver for the RouterBoard 750"
- depends on MTD_NAND && ATH79_MACH_RB750
-
-+config MTD_NAND_RB91X
-+ tristate "NAND flash driver for the RouterBOARD 91x series"
-+ depends on MTD_NAND && ATH79_MACH_RB91X
-+
- config MTD_NAND_AR934X
- tristate "NAND flash driver for the Qualcomm Atheros AR934x/QCA955x SoCs"
- depends on (SOC_AR934X || SOC_QCA955X)
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -37,6 +37,7 @@ obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nan
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
- obj-$(CONFIG_MTD_NAND_RB4XX) += rb4xx_nand.o
- obj-$(CONFIG_MTD_NAND_RB750) += rb750_nand.o
-+obj-$(CONFIG_MTD_NAND_RB91X) += rb91x_nand.o
- obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
- obj-$(CONFIG_MTD_NAND_OXNAS) += oxnas_nand.o
diff --git a/target/linux/ar71xx/patches-4.14/420-net-ar71xx_mac_driver.patch b/target/linux/ar71xx/patches-4.14/420-net-ar71xx_mac_driver.patch
deleted file mode 100644
index 6377db0ac2..0000000000
--- a/target/linux/ar71xx/patches-4.14/420-net-ar71xx_mac_driver.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/net/ethernet/atheros/Kconfig
-+++ b/drivers/net/ethernet/atheros/Kconfig
-@@ -5,7 +5,7 @@
- config NET_VENDOR_ATHEROS
- bool "Atheros devices"
- default y
-- depends on PCI
-+ depends on (PCI || ATH79)
- ---help---
- If you have a network (Ethernet) card belonging to this class, say Y.
-
-@@ -78,4 +78,6 @@ config ALX
- To compile this driver as a module, choose M here. The module
- will be called alx.
-
-+source drivers/net/ethernet/atheros/ag71xx/Kconfig
-+
- endif # NET_VENDOR_ATHEROS
---- a/drivers/net/ethernet/atheros/Makefile
-+++ b/drivers/net/ethernet/atheros/Makefile
-@@ -3,6 +3,7 @@
- # Makefile for the Atheros network device drivers.
- #
-
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_ATL1) += atlx/
- obj-$(CONFIG_ATL2) += atlx/
- obj-$(CONFIG_ATL1E) += atl1e/
diff --git a/target/linux/ar71xx/patches-4.14/423-dsa-add-88e6063-driver.patch b/target/linux/ar71xx/patches-4.14/423-dsa-add-88e6063-driver.patch
deleted file mode 100644
index 94172d01b7..0000000000
--- a/target/linux/ar71xx/patches-4.14/423-dsa-add-88e6063-driver.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/net/dsa/Kconfig
-+++ b/drivers/net/dsa/Kconfig
-@@ -3,6 +3,14 @@ menu "Distributed Switch Architecture dr
-
- source "drivers/net/dsa/b53/Kconfig"
-
-+config NET_DSA_MV88E6063
-+ bool "Marvell 88E6063 ethernet switch chip support"
-+ depends on NET_DSA
-+ select NET_DSA_TAG_TRAILER
-+ ---help---
-+ This enables support for the Marvell 88E6063 ethernet switch
-+ chip
-+
- config NET_DSA_BCM_SF2
- tristate "Broadcom Starfighter 2 Ethernet switch support"
- depends on HAS_IOMEM && NET_DSA && OF_MDIO
---- a/drivers/net/dsa/Makefile
-+++ b/drivers/net/dsa/Makefile
-@@ -7,6 +7,7 @@ obj-$(CONFIG_FIXED_PHY) += dsa_loop_bdi
- endif
- obj-$(CONFIG_NET_DSA_MT7530) += mt7530.o
- obj-$(CONFIG_NET_DSA_MV88E6060) += mv88e6060.o
-+obj-$(CONFIG_NET_DSA_MV88E6063) += mv88e6063.o
- obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o
- obj-$(CONFIG_NET_DSA_SMSC_LAN9303) += lan9303-core.o
- obj-$(CONFIG_NET_DSA_SMSC_LAN9303_I2C) += lan9303_i2c.o
diff --git a/target/linux/ar71xx/patches-4.14/430-drivers-link-spi-before-mtd.patch b/target/linux/ar71xx/patches-4.14/430-drivers-link-spi-before-mtd.patch
deleted file mode 100644
index 2f1549710b..0000000000
--- a/target/linux/ar71xx/patches-4.14/430-drivers-link-spi-before-mtd.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -83,8 +83,8 @@ obj-$(CONFIG_SCSI) += scsi/
- obj-y += nvme/
- obj-$(CONFIG_ATA) += ata/
- obj-$(CONFIG_TARGET_CORE) += target/
--obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPI) += spi/
-+obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPMI) += spmi/
- obj-$(CONFIG_HSI) += hsi/
- obj-y += net/
diff --git a/target/linux/ar71xx/patches-4.14/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-4.14/432-spi-rb4xx-spi-driver.patch
deleted file mode 100644
index 9b0148998f..0000000000
--- a/target/linux/ar71xx/patches-4.14/432-spi-rb4xx-spi-driver.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -563,6 +563,12 @@ config SPI_QUP
- This driver can also be built as a module. If so, the module
- will be called spi_qup.
-
-+config SPI_RB4XX
-+ tristate "Mikrotik RB4XX SPI master"
-+ depends on SPI_MASTER && ATH79_MACH_RB4XX
-+ help
-+ SPI controller driver for the Mikrotik RB4xx series boards.
-+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -77,6 +77,7 @@ obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.
- spi-pxa2xx-platform-objs := spi-pxa2xx.o spi-pxa2xx-dma.o
- obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
- obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
-+obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
- obj-$(CONFIG_SPI_QUP) += spi-qup.o
- obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
- obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
diff --git a/target/linux/ar71xx/patches-4.14/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-4.14/433-spi-rb4xx-cpld-driver.patch
deleted file mode 100644
index 02c30c6631..0000000000
--- a/target/linux/ar71xx/patches-4.14/433-spi-rb4xx-cpld-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -801,6 +801,13 @@ config SPI_TLE62X0
- sysfs interface, with each line presented as a kind of GPIO
- exposing both switch control and diagnostic feedback.
-
-+config SPI_RB4XX_CPLD
-+ tristate "MikroTik RB4XX CPLD driver"
-+ depends on ATH79_MACH_RB4XX
-+ help
-+ SPI driver for the Xilinx CPLD chip present on the
-+ MikroTik RB4xx boards.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -78,6 +78,7 @@ spi-pxa2xx-platform-objs := spi-pxa2xx.
- obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
- obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
- obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
-+obj-$(CONFIG_SPI_RB4XX_CPLD) += spi-rb4xx-cpld.o
- obj-$(CONFIG_SPI_QUP) += spi-qup.o
- obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockchip.o
- obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
diff --git a/target/linux/ar71xx/patches-4.14/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-4.14/435-spi-vsc7385_driver.patch
deleted file mode 100644
index bef0c86761..0000000000
--- a/target/linux/ar71xx/patches-4.14/435-spi-vsc7385_driver.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -808,6 +808,11 @@ config SPI_RB4XX_CPLD
- SPI driver for the Xilinx CPLD chip present on the
- MikroTik RB4xx boards.
-
-+config SPI_VSC7385
-+ tristate "Vitesse VSC7385 ethernet switch driver"
-+ help
-+ SPI driver for the Vitesse VSC7385 ethernet switch.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -105,6 +105,7 @@ spi-thunderx-objs := spi-cavium.o spi-
- obj-$(CONFIG_SPI_THUNDERX) += spi-thunderx.o
- obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi-topcliff-pch.o
- obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
-+obj-$(CONFIG_SPI_VSC7385) += spi-vsc7385.o
- obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
- obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
- obj-$(CONFIG_SPI_XLP) += spi-xlp.o
diff --git a/target/linux/ar71xx/patches-4.14/440-leds-wndr3700-usb-led-driver.patch b/target/linux/ar71xx/patches-4.14/440-leds-wndr3700-usb-led-driver.patch
deleted file mode 100644
index e5f7cc5c00..0000000000
--- a/target/linux/ar71xx/patches-4.14/440-leds-wndr3700-usb-led-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -696,6 +696,13 @@ config LEDS_NIC78BX
- To compile this driver as a module, choose M here: the module
- will be called leds-nic78bx.
-
-+config LEDS_WNDR3700_USB
-+ tristate "NETGEAR WNDR3700 USB LED driver"
-+ depends on LEDS_CLASS && ATH79_MACH_WNDR3700
-+ help
-+ This option enables support for the USB LED found on the
-+ NETGEAR WNDR3700 board.
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
-
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -51,6 +51,7 @@ obj-$(CONFIG_LEDS_DA9052) += leds-da905
- obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
- obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
- obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
-+obj-${CONFIG_LEDS_WNDR3700_USB} += leds-wndr3700-usb.o
- obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o
- obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
- obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
diff --git a/target/linux/ar71xx/patches-4.14/441-leds-rb750-led-driver.patch b/target/linux/ar71xx/patches-4.14/441-leds-rb750-led-driver.patch
deleted file mode 100644
index 012e6b4380..0000000000
--- a/target/linux/ar71xx/patches-4.14/441-leds-rb750-led-driver.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -703,6 +703,10 @@ config LEDS_WNDR3700_USB
- This option enables support for the USB LED found on the
- NETGEAR WNDR3700 board.
-
-+config LEDS_RB750
-+ tristate "LED driver for the Mikrotik RouterBOARD 750"
-+ depends on LEDS_CLASS && ATH79_MACH_RB750
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
-
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -57,6 +57,7 @@ obj-$(CONFIG_LEDS_INTEL_SS4200) += leds
- obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
- obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
- obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
-+obj-$(CONFIG_LEDS_RB750) += leds-rb750.o
- obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
- obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
- obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
diff --git a/target/linux/ar71xx/patches-4.14/442-leds-gpio-allow-to-use-OPEN_-DRAIN-SOURCE-flags-with.patch b/target/linux/ar71xx/patches-4.14/442-leds-gpio-allow-to-use-OPEN_-DRAIN-SOURCE-flags-with.patch
deleted file mode 100644
index 3dbf68b1ed..0000000000
--- a/target/linux/ar71xx/patches-4.14/442-leds-gpio-allow-to-use-OPEN_-DRAIN-SOURCE-flags-with.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 183148e0789bee1cd5c46ba49afcb211f636f8a2 Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@freemail.hu>
-Date: Mon, 15 Jan 2018 15:01:14 +0100
-Subject: [PATCH] leds: gpio: allow to use OPEN_{DRAIN,SOURCE} flags with
- legacy GPIOs
-
-LEDs which are connected to open-source or open-drain type of GPIO lines
-can be used only, if those are defined via devicetree.
-Add two new fields to 'struct gpio_led' in order to make it possible to
-specify this type of GPIO lines to the leds-gpio driver via platform data.
-Also update the create_gpio_led() function to set the GPIOF_OPEN_DRAIN and
-GPIOF_OPEN_SOURCE flags for the given GPIO line.
-
-Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
----
- drivers/leds/leds-gpio.c | 6 ++++++
- include/linux/leds.h | 2 ++
- 2 files changed, 8 insertions(+)
-
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -100,6 +100,12 @@ static int create_gpio_led(const struct
- if (template->active_low)
- flags |= GPIOF_ACTIVE_LOW;
-
-+ if (template->open_drain)
-+ flags |= GPIOF_OPEN_DRAIN;
-+
-+ if (template->open_source)
-+ flags |= GPIOF_OPEN_SOURCE;
-+
- ret = devm_gpio_request_one(parent, template->gpio, flags,
- template->name);
- if (ret < 0)
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -395,6 +395,8 @@ struct gpio_led {
- unsigned default_state : 2;
- unsigned retain_state_shutdown : 1;
- /* default_state should be one of LEDS_GPIO_DEFSTATE_(ON|OFF|KEEP) */
-+ unsigned open_drain : 1;
-+ unsigned open_source : 1;
- struct gpio_desc *gpiod;
- };
- #define LEDS_GPIO_DEFSTATE_OFF 0
diff --git a/target/linux/ar71xx/patches-4.14/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-4.14/450-gpio-nxp-74hc153-gpio-chip-driver.patch
deleted file mode 100644
index 48a36cc4ec..0000000000
--- a/target/linux/ar71xx/patches-4.14/450-gpio-nxp-74hc153-gpio-chip-driver.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -1300,4 +1300,12 @@ config GPIO_VIPERBOARD
-
- endmenu
-
-+comment "Other GPIO expanders"
-+
-+config GPIO_NXP_74HC153
-+ tristate "NXP 74HC153 Dual 4-input multiplexer"
-+ help
-+ Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
-+ provides a GPIO interface supporting input mode only.
-+
- endif
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -89,6 +89,7 @@ obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o
- obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o
- obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o
- obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o
-+obj-$(CONFIG_GPIO_NXP_74HC153) += gpio-nxp-74hc153.o
- obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o
- obj-$(CONFIG_GPIO_OMAP) += gpio-omap.o
- obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
diff --git a/target/linux/ar71xx/patches-4.14/451-gpio-74x164-improve-platform-device-support.patch b/target/linux/ar71xx/patches-4.14/451-gpio-74x164-improve-platform-device-support.patch
deleted file mode 100644
index b3c990ccec..0000000000
--- a/target/linux/ar71xx/patches-4.14/451-gpio-74x164-improve-platform-device-support.patch
+++ /dev/null
@@ -1,119 +0,0 @@
---- a/drivers/gpio/gpio-74x164.c
-+++ b/drivers/gpio/gpio-74x164.c
-@@ -13,6 +13,7 @@
- #include <linux/init.h>
- #include <linux/mutex.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/74x164.h>
- #include <linux/gpio.h>
- #include <linux/of_gpio.h>
- #include <linux/slab.h>
-@@ -105,9 +106,16 @@ static int gen_74x164_direction_output(s
- static int gen_74x164_probe(struct spi_device *spi)
- {
- struct gen_74x164_chip *chip;
-+ struct gen_74x164_chip_platform_data *pdata = spi->dev.platform_data;
-+ struct device_node *np = spi->dev.of_node;
- u32 nregs;
- int ret;
-
-+ if (!np && !pdata) {
-+ dev_err(&spi->dev, "No configuration data available.\n");
-+ return -EINVAL;
-+ }
-+
- /*
- * bits_per_word cannot be configured in platform data
- */
-@@ -117,12 +125,15 @@ static int gen_74x164_probe(struct spi_d
- if (ret < 0)
- return ret;
-
-- if (of_property_read_u32(spi->dev.of_node, "registers-number",
-- &nregs)) {
-- dev_err(&spi->dev,
-- "Missing registers-number property in the DT.\n");
-- return -EINVAL;
-- }
-+ if (np) {
-+ if (of_property_read_u32(np, "registers-number", &nregs)) {
-+ dev_err(&spi->dev,
-+ "Missing registers-number property in the DT.\n");
-+ return -EINVAL;
-+ }
-+ } else if (pdata) {
-+ nregs = pdata->num_registers;
-+ }
-
- chip = devm_kzalloc(&spi->dev, sizeof(*chip) + nregs, GFP_KERNEL);
- if (!chip)
-@@ -142,7 +153,11 @@ static int gen_74x164_probe(struct spi_d
- chip->gpio_chip.get = gen_74x164_get_value;
- chip->gpio_chip.set = gen_74x164_set_value;
- chip->gpio_chip.set_multiple = gen_74x164_set_multiple;
-- chip->gpio_chip.base = -1;
-+ if (np)
-+ chip->gpio_chip.base = -1;
-+ else if (pdata)
-+ chip->gpio_chip.base = pdata->base;
-+
-
- chip->registers = nregs;
- chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
-@@ -151,6 +166,9 @@ static int gen_74x164_probe(struct spi_d
- chip->gpio_chip.parent = &spi->dev;
- chip->gpio_chip.owner = THIS_MODULE;
-
-+ if (pdata && pdata->init_data)
-+ memcpy(chip->buffer, pdata->init_data, chip->registers);
-+
- mutex_init(&chip->lock);
-
- ret = __gen_74x164_write_config(chip);
-@@ -180,17 +198,19 @@ static int gen_74x164_remove(struct spi_
- return 0;
- }
-
-+#ifdef CONFIG_OF
- static const struct of_device_id gen_74x164_dt_ids[] = {
- { .compatible = "fairchild,74hc595" },
- { .compatible = "nxp,74lvc594" },
- {},
- };
- MODULE_DEVICE_TABLE(of, gen_74x164_dt_ids);
-+#endif
-
- static struct spi_driver gen_74x164_driver = {
- .driver = {
- .name = "74x164",
-- .of_match_table = gen_74x164_dt_ids,
-+ .of_match_table = of_match_ptr(gen_74x164_dt_ids),
- },
- .probe = gen_74x164_probe,
- .remove = gen_74x164_remove,
---- /dev/null
-+++ b/include/linux/spi/74x164.h
-@@ -0,0 +1,13 @@
-+#ifndef LINUX_SPI_74X164_H
-+#define LINUX_SPI_74X164_H
-+
-+struct gen_74x164_chip_platform_data {
-+ /* number assigned to the first GPIO */
-+ unsigned base;
-+ /* number of chained registers */
-+ unsigned num_registers;
-+ /* address of a buffer containing initial data */
-+ u8 *init_data;
-+};
-+
-+#endif
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -1252,7 +1252,6 @@ menu "SPI GPIO expanders"
-
- config GPIO_74X164
- tristate "74x164 serial-in/parallel-out 8-bits shift register"
-- depends on OF_GPIO
- help
- Driver for 74x164 compatible serial-in/parallel-out 8-outputs
- shift registers. This driver can be used to provide access
diff --git a/target/linux/ar71xx/patches-4.14/452-gpio-add-gpio-latch-driver.patch b/target/linux/ar71xx/patches-4.14/452-gpio-add-gpio-latch-driver.patch
deleted file mode 100644
index 98e9123ce7..0000000000
--- a/target/linux/ar71xx/patches-4.14/452-gpio-add-gpio-latch-driver.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -1307,4 +1307,9 @@ config GPIO_NXP_74HC153
- Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This
- provides a GPIO interface supporting input mode only.
-
-+config GPIO_LATCH
-+ tristate "GPIO latch driver"
-+ help
-+ Say yes here to enable a GPIO latch driver.
-+
- endif
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -63,6 +63,7 @@ obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz
- obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
- obj-$(CONFIG_ARCH_KS8695) += gpio-ks8695.o
- obj-$(CONFIG_GPIO_INTEL_MID) += gpio-intel-mid.o
-+obj-$(CONFIG_GPIO_LATCH) += gpio-latch.o
- obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
- obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
- obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o
diff --git a/target/linux/ar71xx/patches-4.14/461-spi-ath79-add-fast-flash-read.patch b/target/linux/ar71xx/patches-4.14/461-spi-ath79-add-fast-flash-read.patch
deleted file mode 100644
index 45f6dfbf1b..0000000000
--- a/target/linux/ar71xx/patches-4.14/461-spi-ath79-add-fast-flash-read.patch
+++ /dev/null
@@ -1,60 +0,0 @@
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -102,9 +102,6 @@ static void ath79_spi_enable(struct ath7
- /* save CTRL register */
- sp->reg_ctrl = ath79_spi_rr(sp, AR71XX_SPI_REG_CTRL);
- sp->ioc_base = ath79_spi_rr(sp, AR71XX_SPI_REG_IOC);
--
-- /* TODO: setup speed? */
-- ath79_spi_wr(sp, AR71XX_SPI_REG_CTRL, 0x43);
- }
-
- static void ath79_spi_disable(struct ath79_spi *sp)
-@@ -204,6 +201,38 @@ static u32 ath79_spi_txrx_mode0(struct s
- return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
- }
-
-+static bool ath79_spi_flash_read_supported(struct spi_device *spi)
-+{
-+ if (spi->chip_select || gpio_is_valid(spi->cs_gpio))
-+ return false;
-+
-+ return true;
-+}
-+
-+static int ath79_spi_read_flash_data(struct spi_device *spi,
-+ struct spi_flash_read_message *msg)
-+{
-+ struct ath79_spi *sp = ath79_spidev_to_sp(spi);
-+
-+ if (msg->addr_width > 3)
-+ return -EOPNOTSUPP;
-+
-+ /* disable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
-+
-+ memcpy_fromio(msg->buf, sp->base + msg->from, msg->len);
-+
-+ /* enable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
-+
-+ /* restore IOC register */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
-+
-+ msg->retlen = msg->len;
-+
-+ return 0;
-+}
-+
- static int ath79_spi_probe(struct platform_device *pdev)
- {
- struct spi_master *master;
-@@ -233,6 +262,8 @@ static int ath79_spi_probe(struct platfo
- master->num_chipselect = pdata->num_chipselect;
- master->cs_gpios = pdata->cs_gpios;
- }
-+ master->spi_flash_read = ath79_spi_read_flash_data;
-+ master->flash_read_supported = ath79_spi_flash_read_supported;
-
- sp->bitbang.master = master;
- sp->bitbang.chipselect = ath79_spi_chipselect;
diff --git a/target/linux/ar71xx/patches-4.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch b/target/linux/ar71xx/patches-4.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
deleted file mode 100644
index efd7d8d82b..0000000000
--- a/target/linux/ar71xx/patches-4.14/470-MIPS-ath79-swizzle-pci-address-for-ar71xx.patch
+++ /dev/null
@@ -1,111 +0,0 @@
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
-@@ -0,0 +1,37 @@
-+/*
-+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
-+#define __ASM_MACH_ATH79_MANGLE_PORT_H
-+
-+#ifdef CONFIG_PCI
-+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
-+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
-+#else
-+#define ath79_pci_swizzle_b(port) (port)
-+#define ath79_pci_swizzle_w(port) (port)
-+#endif
-+
-+#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port)
-+#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port)
-+#define __swizzle_addr_l(port) (port)
-+#define __swizzle_addr_q(port) (port)
-+
-+# define ioswabb(a, x) (x)
-+# define __mem_ioswabb(a, x) (x)
-+# define ioswabw(a, x) (x)
-+# define __mem_ioswabw(a, x) cpu_to_le16(x)
-+# define ioswabl(a, x) (x)
-+# define __mem_ioswabl(a, x) cpu_to_le32(x)
-+# define ioswabq(a, x) (x)
-+# define __mem_ioswabq(a, x) cpu_to_le64(x)
-+
-+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -13,6 +13,7 @@
- */
-
- #include <linux/init.h>
-+#include <linux/export.h>
- #include <linux/pci.h>
- #include <linux/resource.h>
- #include <linux/platform_device.h>
-@@ -25,6 +26,9 @@ static int (*ath79_pci_plat_dev_init)(st
- static const struct ath79_pci_irq *ath79_pci_irq_map;
- static unsigned ath79_pci_nr_irqs;
-
-+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
-+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
-+
- static const struct ath79_pci_irq ar71xx_pci_irq_map[] = {
- {
- .slot = 17,
-@@ -212,12 +216,50 @@ ath79_register_pci_ar724x(int id,
- return pdev;
- }
-
-+static inline bool ar71xx_is_pci_addr(unsigned long port)
-+{
-+ unsigned long phys = CPHYSADDR(port);
-+
-+ return (phys >= AR71XX_PCI_MEM_BASE &&
-+ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
-+}
-+
-+unsigned long ath79_pci_swizzle_b(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_b)
-+ return __ath79_pci_swizzle_b(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_b);
-+
-+unsigned long ath79_pci_swizzle_w(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_w)
-+ return __ath79_pci_swizzle_w(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_w);
-+
- int __init ath79_register_pci(void)
- {
- struct platform_device *pdev = NULL;
-
- if (soc_is_ar71xx()) {
- pdev = ath79_register_pci_ar71xx();
-+ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
-+ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
- } else if (soc_is_ar724x()) {
- pdev = ath79_register_pci_ar724x(-1,
- AR724X_PCI_CFG_BASE,
diff --git a/target/linux/ar71xx/patches-4.14/490-usb-ehci-add-quirks-for-qca-socs.patch b/target/linux/ar71xx/patches-4.14/490-usb-ehci-add-quirks-for-qca-socs.patch
deleted file mode 100644
index f9ee417bb4..0000000000
--- a/target/linux/ar71xx/patches-4.14/490-usb-ehci-add-quirks-for-qca-socs.patch
+++ /dev/null
@@ -1,103 +0,0 @@
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -252,6 +252,37 @@ int ehci_reset(struct ehci_hcd *ehci)
- command |= CMD_RESET;
- dbg_cmd (ehci, "reset", command);
- ehci_writel(ehci, command, &ehci->regs->command);
-+
-+ if (ehci->qca_force_host_mode) {
-+ u32 usbmode;
-+
-+ udelay(1000);
-+
-+ usbmode = ehci_readl(ehci, &ehci->regs->usbmode);
-+ usbmode |= USBMODE_CM_HC | (1 << 4);
-+ ehci_writel(ehci, usbmode, &ehci->regs->usbmode);
-+
-+ ehci_dbg(ehci, "forced host mode, usbmode: %08x\n",
-+ ehci_readl(ehci, &ehci->regs->usbmode));
-+ }
-+
-+ if (ehci->qca_force_16bit_ptw) {
-+ u32 port_status;
-+
-+ udelay(1000);
-+
-+ /* enable 16-bit UTMI interface */
-+ port_status = ehci_readl(ehci, &ehci->regs->port_status[0]);
-+ port_status |= BIT(28);
-+ ehci_writel(ehci, port_status, &ehci->regs->port_status[0]);
-+
-+ ehci_dbg(ehci, "16-bit UTMI interface enabled, status: %08x\n",
-+ ehci_readl(ehci, &ehci->regs->port_status[0]));
-+ }
-+
-+ if (ehci->reset_notifier)
-+ ehci->reset_notifier(ehci_to_hcd(ehci));
-+
- ehci->rh_state = EHCI_RH_HALTED;
- ehci->next_statechange = jiffies;
- retval = ehci_handshake(ehci, &ehci->regs->command,
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -232,6 +232,10 @@ struct ehci_hcd { /* one per controlle
- unsigned need_oc_pp_cycle:1; /* MPC834X port power */
- unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
- unsigned ignore_oc:1;
-+ unsigned qca_force_host_mode:1;
-+ unsigned qca_force_16bit_ptw:1; /* force 16 bit UTMI */
-+
-+ void (*reset_notifier)(struct usb_hcd *hcd);
-
- /* required for usb32 quirk */
- #define OHCI_CTRL_HCFS (3 << 6)
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -50,6 +50,8 @@ struct usb_ehci_pdata {
- unsigned reset_on_resume:1;
- unsigned dma_mask_64:1;
- unsigned ignore_oc:1;
-+ unsigned qca_force_host_mode:1;
-+ unsigned qca_force_16bit_ptw:1;
-
- /* Turn on all power and clocks */
- int (*power_on)(struct platform_device *pdev);
-@@ -59,6 +61,7 @@ struct usb_ehci_pdata {
- * turn off everything else */
- void (*power_suspend)(struct platform_device *pdev);
- int (*pre_setup)(struct usb_hcd *hcd);
-+ void (*reset_notifier)(struct platform_device *pdev);
- };
-
- #endif /* __USB_CORE_EHCI_PDRIVER_H */
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -53,6 +53,14 @@ struct ehci_platform_priv {
-
- static const char hcd_name[] = "ehci-platform";
-
-+static void ehci_platform_reset_notifier(struct usb_hcd *hcd)
-+{
-+ struct platform_device *pdev = to_platform_device(hcd->self.controller);
-+ struct usb_ehci_pdata *pdata = pdev->dev.platform_data;
-+
-+ pdata->reset_notifier(pdev);
-+}
-+
- static int ehci_platform_reset(struct usb_hcd *hcd)
- {
- struct platform_device *pdev = to_platform_device(hcd->self.controller);
-@@ -265,6 +273,13 @@ static int ehci_platform_probe(struct pl
- priv->reset_on_resume = true;
- if (pdata->ignore_oc)
- ehci->ignore_oc = 1;
-+ if (pdata->qca_force_host_mode)
-+ ehci->qca_force_host_mode = 1;
-+ if (pdata->qca_force_16bit_ptw)
-+ ehci->qca_force_16bit_ptw = 1;
-+
-+ if (pdata->reset_notifier)
-+ ehci->reset_notifier = ehci_platform_reset_notifier;
-
- #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
- if (ehci->big_endian_mmio) {
diff --git a/target/linux/ar71xx/patches-4.14/500-MIPS-fw-myloader.patch b/target/linux/ar71xx/patches-4.14/500-MIPS-fw-myloader.patch
deleted file mode 100644
index 1fdd05a4d9..0000000000
--- a/target/linux/ar71xx/patches-4.14/500-MIPS-fw-myloader.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -228,6 +228,7 @@ cflags-$(toolchain-virt) += -DTOOLCHAIN
- #
- libs-$(CONFIG_FW_ARC) += arch/mips/fw/arc/
- libs-$(CONFIG_FW_CFE) += arch/mips/fw/cfe/
-+libs-$(CONFIG_MYLOADER) += arch/mips/fw/myloader/
- libs-$(CONFIG_FW_SNIPROM) += arch/mips/fw/sni/
- libs-y += arch/mips/fw/lib/
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1153,6 +1153,9 @@ config MIPS_MSC
- config MIPS_NILE4
- bool
-
-+config MYLOADER
-+ bool
-+
- config SYNC_R4K
- bool
-
diff --git a/target/linux/ar71xx/patches-4.14/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch b/target/linux/ar71xx/patches-4.14/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch
deleted file mode 100644
index 12ab3b50d6..0000000000
--- a/target/linux/ar71xx/patches-4.14/501-MIPS-ath79-add-mac-argument-to-ath79_register_wmac.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -15,6 +15,7 @@
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/irq.h>
-+#include <linux/etherdevice.h>
- #include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-
-@@ -22,6 +23,7 @@
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "dev-wmac.h"
-
-+static u8 ath79_wmac_mac[ETH_ALEN];
- static struct ath9k_platform_data ath79_wmac_data;
-
- static struct resource ath79_wmac_resources[] = {
-@@ -161,7 +163,7 @@ static void qca955x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = true;
- }
-
--void __init ath79_register_wmac(u8 *cal_data)
-+void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
- ar913x_wmac_setup();
-@@ -178,5 +180,10 @@ void __init ath79_register_wmac(u8 *cal_
- memcpy(ath79_wmac_data.eeprom_data, cal_data,
- sizeof(ath79_wmac_data.eeprom_data));
-
-+ if (mac_addr) {
-+ memcpy(ath79_wmac_mac, mac_addr, sizeof(ath79_wmac_mac));
-+ ath79_wmac_data.macaddr = ath79_wmac_mac;
-+ }
-+
- platform_device_register(&ath79_wmac_device);
- }
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -12,6 +12,6 @@
- #ifndef _ATH79_DEV_WMAC_H
- #define _ATH79_DEV_WMAC_H
-
--void ath79_register_wmac(u8 *cal_data);
-+void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
-
- #endif /* _ATH79_DEV_WMAC_H */
---- a/arch/mips/ath79/mach-db120.c
-+++ b/arch/mips/ath79/mach-db120.c
-@@ -128,7 +128,7 @@ static void __init db120_setup(void)
- ath79_register_spi(&db120_spi_data, db120_spi_info,
- ARRAY_SIZE(db120_spi_info));
- ath79_register_usb();
-- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
-+ ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
- }
-
---- a/arch/mips/ath79/mach-ap121.c
-+++ b/arch/mips/ath79/mach-ap121.c
-@@ -85,7 +85,7 @@ static void __init ap121_setup(void)
- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
- ARRAY_SIZE(ap121_spi_info));
- ath79_register_usb();
-- ath79_register_wmac(cal_data);
-+ ath79_register_wmac(cal_data, NULL);
- }
-
- MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
diff --git a/target/linux/ar71xx/patches-4.14/504-MIPS-ath79-add-ath79_device_reset_get.patch b/target/linux/ar71xx/patches-4.14/504-MIPS-ath79-add-ath79_device_reset_get.patch
deleted file mode 100644
index c0e96b2729..0000000000
--- a/target/linux/ar71xx/patches-4.14/504-MIPS-ath79-add-ath79_device_reset_get.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -145,6 +145,7 @@ static inline u32 ath79_reset_rr(unsigne
-
- void ath79_device_reset_set(u32 mask);
- void ath79_device_reset_clear(u32 mask);
-+u32 ath79_device_reset_get(u32 mask);
-
- void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3);
- void ath79_misc_irq_init(void __iomem *regs, int irq,
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -142,3 +142,29 @@ void ath79_device_reset_clear(u32 mask)
- spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
- }
- EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
-+
-+u32 ath79_device_reset_get(u32 mask)
-+{
-+ unsigned long flags;
-+ u32 reg;
-+ u32 ret;
-+
-+ if (soc_is_ar71xx())
-+ reg = AR71XX_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar724x())
-+ reg = AR724X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar913x())
-+ reg = AR913X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar933x())
-+ reg = AR933X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_ar934x())
-+ reg = AR934X_RESET_REG_RESET_MODULE;
-+ else
-+ BUG();
-+
-+ spin_lock_irqsave(&ath79_device_reset_lock, flags);
-+ ret = ath79_reset_rr(reg);
-+ spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(ath79_device_reset_get);
diff --git a/target/linux/ar71xx/patches-4.14/505-MIPS-ath79-add-ath79_gpio_function_select.patch b/target/linux/ar71xx/patches-4.14/505-MIPS-ath79-add-ath79_gpio_function_select.patch
deleted file mode 100644
index 278e781539..0000000000
--- a/target/linux/ar71xx/patches-4.14/505-MIPS-ath79-add-ath79_gpio_function_select.patch
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -27,6 +27,7 @@ void ath79_ddr_ctrl_init(void);
- void ath79_gpio_function_enable(u32 mask);
- void ath79_gpio_function_disable(u32 mask);
- void ath79_gpio_function_setup(u32 set, u32 clear);
-+void ath79_gpio_output_select(unsigned gpio, u8 val);
- void ath79_gpio_init(void);
-
- #endif /* __ATH79_COMMON_H */
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -57,3 +57,26 @@ void ath79_gpio_function_disable(u32 mas
- {
- ath79_gpio_function_setup(0, mask);
- }
-+
-+void __init ath79_gpio_output_select(unsigned gpio, u8 val)
-+{
-+ void __iomem *base = ath79_gpio_base;
-+ unsigned int reg;
-+ u32 t, s;
-+
-+ BUG_ON(!soc_is_ar934x());
-+
-+ if (gpio >= AR934X_GPIO_COUNT)
-+ return;
-+
-+ reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
-+ s = 8 * (gpio % 4);
-+
-+ t = __raw_readl(base + reg);
-+ t &= ~(0xff << s);
-+ t |= val << s;
-+ __raw_writel(t, base + reg);
-+
-+ /* flush write */
-+ (void) __raw_readl(base + reg);
-+}
diff --git a/target/linux/ar71xx/patches-4.14/506-MIPS-ath79-prom-parse-redboot-args.patch b/target/linux/ar71xx/patches-4.14/506-MIPS-ath79-prom-parse-redboot-args.patch
deleted file mode 100644
index 46beeffeea..0000000000
--- a/target/linux/ar71xx/patches-4.14/506-MIPS-ath79-prom-parse-redboot-args.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -22,10 +22,39 @@
-
- #include "common.h"
-
-+static char ath79_cmdline_buf[COMMAND_LINE_SIZE] __initdata;
-+
-+static void __init ath79_prom_append_cmdline(const char *name,
-+ const char *value)
-+{
-+ snprintf(ath79_cmdline_buf, sizeof(ath79_cmdline_buf),
-+ " %s=%s", name, value);
-+ strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
-+}
-+
- void __init prom_init(void)
- {
-+ const char *env;
-+
- fw_init_cmdline();
-
-+ env = fw_getenv("ethaddr");
-+ if (env)
-+ ath79_prom_append_cmdline("ethaddr", env);
-+
-+ env = fw_getenv("board");
-+ if (env) {
-+ /* Workaround for buggy bootloaders */
-+ if (strcmp(env, "RouterStation") == 0 ||
-+ strcmp(env, "Ubiquiti AR71xx-based board") == 0)
-+ env = "UBNT-RS";
-+
-+ if (strcmp(env, "RouterStation PRO") == 0)
-+ env = "UBNT-RSPRO";
-+
-+ ath79_prom_append_cmdline("board", env);
-+ }
-+
- #ifdef CONFIG_BLK_DEV_INITRD
- /* Read the initrd address from the firmware environment */
- initrd_start = fw_getenvl("initrd_start");
diff --git a/target/linux/ar71xx/patches-4.14/507-MIPS-ath79-prom-add-myloader-support.patch b/target/linux/ar71xx/patches-4.14/507-MIPS-ath79-prom-add-myloader-support.patch
deleted file mode 100644
index 17a97335d2..0000000000
--- a/target/linux/ar71xx/patches-4.14/507-MIPS-ath79-prom-add-myloader-support.patch
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -19,6 +19,7 @@
- #include <asm/bootinfo.h>
- #include <asm/addrspace.h>
- #include <asm/fw/fw.h>
-+#include <asm/fw/myloader/myloader.h>
-
- #include "common.h"
-
-@@ -32,10 +33,44 @@ static void __init ath79_prom_append_cmd
- strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
- }
-
-+static int __init ath79_prom_init_myloader(void)
-+{
-+ struct myloader_info *mylo;
-+ char mac_buf[32];
-+ unsigned char *mac;
-+
-+ mylo = myloader_get_info();
-+ if (!mylo)
-+ return 0;
-+
-+ switch (mylo->did) {
-+ case DEVID_COMPEX_WP543:
-+ ath79_prom_append_cmdline("board", "WP543");
-+ break;
-+ case DEVID_COMPEX_WPE72:
-+ ath79_prom_append_cmdline("board", "WPE72");
-+ break;
-+ default:
-+ pr_warn("prom: unknown device id: %x\n", mylo->did);
-+ return 0;
-+ }
-+
-+ mac = mylo->macs[0];
-+ snprintf(mac_buf, sizeof(mac_buf), "%02x:%02x:%02x:%02x:%02x:%02x",
-+ mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
-+
-+ ath79_prom_append_cmdline("ethaddr", mac_buf);
-+
-+ return 1;
-+}
-+
- void __init prom_init(void)
- {
- const char *env;
-
-+ if (ath79_prom_init_myloader())
-+ return;
-+
- fw_init_cmdline();
-
- env = fw_getenv("ethaddr");
diff --git a/target/linux/ar71xx/patches-4.14/508-MIPS-ath79-prom-image-command-line-hack.patch b/target/linux/ar71xx/patches-4.14/508-MIPS-ath79-prom-image-command-line-hack.patch
deleted file mode 100644
index cfa5e72eec..0000000000
--- a/target/linux/ar71xx/patches-4.14/508-MIPS-ath79-prom-image-command-line-hack.patch
+++ /dev/null
@@ -1,73 +0,0 @@
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -33,6 +33,41 @@ static void __init ath79_prom_append_cmd
- strlcat(arcs_cmdline, ath79_cmdline_buf, sizeof(arcs_cmdline));
- }
-
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+extern char __image_cmdline[];
-+
-+static int __init ath79_use_image_cmdline(void)
-+{
-+ char *p = __image_cmdline;
-+ int replace = 0;
-+
-+ if (*p == '-') {
-+ replace = 1;
-+ p++;
-+ }
-+
-+ if (*p == '\0')
-+ return 0;
-+
-+ if (replace) {
-+ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
-+ } else {
-+ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
-+ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
-+ }
-+
-+ /* Validate and setup environment pointer */
-+ if (fw_arg2 < CKSEG0)
-+ _fw_envp = NULL;
-+ else
-+ _fw_envp = (int *)fw_arg2;
-+
-+ return 1;
-+}
-+#else
-+static inline int ath79_use_image_cmdline(void) { return 0; }
-+#endif
-+
- static int __init ath79_prom_init_myloader(void)
- {
- struct myloader_info *mylo;
-@@ -61,6 +96,8 @@ static int __init ath79_prom_init_myload
-
- ath79_prom_append_cmdline("ethaddr", mac_buf);
-
-+ ath79_use_image_cmdline();
-+
- return 1;
- }
-
-@@ -71,7 +108,8 @@ void __init prom_init(void)
- if (ath79_prom_init_myloader())
- return;
-
-- fw_init_cmdline();
-+ if (!ath79_use_image_cmdline())
-+ fw_init_cmdline();
-
- env = fw_getenv("ethaddr");
- if (env)
---- a/arch/mips/fw/lib/cmdline.c
-+++ b/arch/mips/fw/lib/cmdline.c
-@@ -35,6 +35,7 @@ void __init fw_init_cmdline(void)
- else
- _fw_envp = (int *)fw_arg2;
-
-+ arcs_cmdline[0] = '\0';
- for (i = 1; i < fw_argc; i++) {
- strlcat(arcs_cmdline, fw_argv(i), COMMAND_LINE_SIZE);
- if (i < (fw_argc - 1))
diff --git a/target/linux/ar71xx/patches-4.14/509-MIPS-ath79-process-board-kernel-option.patch b/target/linux/ar71xx/patches-4.14/509-MIPS-ath79-process-board-kernel-option.patch
deleted file mode 100644
index 139b09c1b0..0000000000
--- a/target/linux/ar71xx/patches-4.14/509-MIPS-ath79-process-board-kernel-option.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -277,6 +277,8 @@ void __init plat_time_init(void)
- mips_hpt_frequency = cpu_clk_rate / 2;
- }
-
-+__setup("board=", mips_machtype_setup);
-+
- static int __init ath79_setup(void)
- {
- if (mips_machtype == ATH79_MACH_GENERIC_OF)
diff --git a/target/linux/ar71xx/patches-4.14/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch b/target/linux/ar71xx/patches-4.14/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch
deleted file mode 100644
index 2d2235e292..0000000000
--- a/target/linux/ar71xx/patches-4.14/510-MIPS-ath79-init-gpio-pin-of-wmac-device.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -24,7 +24,10 @@
- #include "dev-wmac.h"
-
- static u8 ath79_wmac_mac[ETH_ALEN];
--static struct ath9k_platform_data ath79_wmac_data;
-+
-+static struct ath9k_platform_data ath79_wmac_data = {
-+ .led_pin = -1,
-+};
-
- static struct resource ath79_wmac_resources[] = {
- {
diff --git a/target/linux/ar71xx/patches-4.14/520-MIPS-ath79-enable-UART-function.patch b/target/linux/ar71xx/patches-4.14/520-MIPS-ath79-enable-UART-function.patch
deleted file mode 100644
index c8649b7494..0000000000
--- a/target/linux/ar71xx/patches-4.14/520-MIPS-ath79-enable-UART-function.patch
+++ /dev/null
@@ -1,18 +0,0 @@
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -81,6 +81,15 @@ void __init ath79_register_uart(void)
-
- uart_clk_rate = ath79_get_sys_clk_rate("uart");
-
-+ if (soc_is_ar71xx())
-+ ath79_gpio_function_enable(AR71XX_GPIO_FUNC_UART_EN);
-+ else if (soc_is_ar724x())
-+ ath79_gpio_function_enable(AR724X_GPIO_FUNC_UART_EN);
-+ else if (soc_is_ar913x())
-+ ath79_gpio_function_enable(AR913X_GPIO_FUNC_UART_EN);
-+ else if (soc_is_ar933x())
-+ ath79_gpio_function_enable(AR933X_GPIO_FUNC_UART_EN);
-+
- if (soc_is_ar71xx() ||
- soc_is_ar724x() ||
- soc_is_ar913x() ||
diff --git a/target/linux/ar71xx/patches-4.14/521-MIPS-ath79-enable-UART-for-early_serial.patch b/target/linux/ar71xx/patches-4.14/521-MIPS-ath79-enable-UART-for-early_serial.patch
deleted file mode 100644
index e546ff26fe..0000000000
--- a/target/linux/ar71xx/patches-4.14/521-MIPS-ath79-enable-UART-for-early_serial.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -58,6 +58,46 @@ static void prom_putchar_dummy(unsigned
- /* nothing to do */
- }
-
-+static void prom_enable_uart(u32 id)
-+{
-+ void __iomem *gpio_base;
-+ u32 uart_en;
-+ u32 t;
-+
-+ switch (id) {
-+ case REV_ID_MAJOR_AR71XX:
-+ uart_en = AR71XX_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR7240:
-+ case REV_ID_MAJOR_AR7241:
-+ case REV_ID_MAJOR_AR7242:
-+ uart_en = AR724X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR913X:
-+ uart_en = AR913X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR9330:
-+ case REV_ID_MAJOR_AR9331:
-+ uart_en = AR933X_GPIO_FUNC_UART_EN;
-+ break;
-+
-+ case REV_ID_MAJOR_AR9341:
-+ case REV_ID_MAJOR_AR9342:
-+ case REV_ID_MAJOR_AR9344:
-+ /* TODO */
-+ default:
-+ return;
-+ }
-+
-+ gpio_base = (void __iomem *)(KSEG1ADDR(AR71XX_GPIO_BASE));
-+ t = __raw_readl(gpio_base + AR71XX_GPIO_REG_FUNC);
-+ t |= uart_en;
-+ __raw_writel(t, gpio_base + AR71XX_GPIO_REG_FUNC);
-+}
-+
- static void prom_putchar_init(void)
- {
- void __iomem *base;
-@@ -88,8 +128,10 @@ static void prom_putchar_init(void)
-
- default:
- _prom_putchar = prom_putchar_dummy;
-- break;
-+ return;
- }
-+
-+ prom_enable_uart(id);
- }
-
- void prom_putchar(unsigned char ch)
diff --git a/target/linux/ar71xx/patches-4.14/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch b/target/linux/ar71xx/patches-4.14/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch
deleted file mode 100644
index 2d5559cb9d..0000000000
--- a/target/linux/ar71xx/patches-4.14/522-MIPS-ath79-add-ath79_wmac_register_simple-helper.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -190,3 +190,9 @@ void __init ath79_register_wmac(u8 *cal_
-
- platform_device_register(&ath79_wmac_device);
- }
-+
-+void __init ath79_register_wmac_simple(void)
-+{
-+ ath79_register_wmac(NULL, NULL);
-+ ath79_wmac_data.eeprom_name = "soc_wmac.eeprom";
-+}
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -13,5 +13,6 @@
- #define _ATH79_DEV_WMAC_H
-
- void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
-+void ath79_register_wmac_simple(void);
-
- #endif /* _ATH79_DEV_WMAC_H */
diff --git a/target/linux/ar71xx/patches-4.14/523-MIPS-ath79-OTP-support.patch b/target/linux/ar71xx/patches-4.14/523-MIPS-ath79-OTP-support.patch
deleted file mode 100644
index d11d418f17..0000000000
--- a/target/linux/ar71xx/patches-4.14/523-MIPS-ath79-OTP-support.patch
+++ /dev/null
@@ -1,192 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -166,6 +166,149 @@ static void qca955x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = true;
- }
-
-+#define AR93XX_WMAC_SIZE \
-+ (soc_is_ar934x() ? AR934X_WMAC_SIZE : AR933X_WMAC_SIZE)
-+#define AR93XX_WMAC_BASE \
-+ (soc_is_ar934x() ? AR934X_WMAC_BASE : AR933X_WMAC_BASE)
-+
-+#define AR93XX_OTP_BASE \
-+ (soc_is_ar934x() ? AR934X_OTP_BASE : AR9300_OTP_BASE)
-+#define AR93XX_OTP_STATUS \
-+ (soc_is_ar934x() ? AR934X_OTP_STATUS : AR9300_OTP_STATUS)
-+#define AR93XX_OTP_READ_DATA \
-+ (soc_is_ar934x() ? AR934X_OTP_READ_DATA : AR9300_OTP_READ_DATA)
-+
-+static bool __init
-+ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
-+{
-+ int timeout = 1000;
-+ u32 val;
-+
-+ __raw_readl(base + AR93XX_OTP_BASE + (4 * addr));
-+ while (timeout--) {
-+ val = __raw_readl(base + AR93XX_OTP_STATUS);
-+ if ((val & AR9300_OTP_STATUS_TYPE) == AR9300_OTP_STATUS_VALID)
-+ break;
-+
-+ udelay(10);
-+ }
-+
-+ if (!timeout)
-+ return false;
-+
-+ *data = __raw_readl(base + AR93XX_OTP_READ_DATA);
-+ return true;
-+}
-+
-+static bool __init
-+ar93xx_wmac_otp_read(void __iomem *base, int addr, u8 *dest, int len)
-+{
-+ u32 data;
-+ int i;
-+
-+ for (i = 0; i < len; i++) {
-+ int offset = 8 * ((addr - i) % 4);
-+
-+ if (!ar93xx_wmac_otp_read_word(base, (addr - i) / 4, &data))
-+ return false;
-+
-+ dest[i] = (data >> offset) & 0xff;
-+ }
-+
-+ return true;
-+}
-+
-+static bool __init
-+ar93xx_wmac_otp_uncompress(void __iomem *base, int addr, int len, u8 *dest,
-+ int dest_start, int dest_len)
-+{
-+ int dest_bytes = 0;
-+ int offset = 0;
-+ int end = addr - len;
-+ u8 hdr[2];
-+
-+ while (addr > end) {
-+ if (!ar93xx_wmac_otp_read(base, addr, hdr, 2))
-+ return false;
-+
-+ addr -= 2;
-+ offset += hdr[0];
-+
-+ if (offset <= dest_start + dest_len &&
-+ offset + len >= dest_start) {
-+ int data_offset = 0;
-+ int dest_offset = 0;
-+ int copy_len;
-+
-+ if (offset < dest_start)
-+ data_offset = dest_start - offset;
-+ else
-+ dest_offset = offset - dest_start;
-+
-+ copy_len = len - data_offset;
-+ if (copy_len > dest_len - dest_offset)
-+ copy_len = dest_len - dest_offset;
-+
-+ ar93xx_wmac_otp_read(base, addr - data_offset,
-+ dest + dest_offset,
-+ copy_len);
-+
-+ dest_bytes += copy_len;
-+ }
-+ addr -= hdr[1];
-+ }
-+ return !!dest_bytes;
-+}
-+
-+bool __init ar93xx_wmac_read_mac_address(u8 *dest)
-+{
-+ void __iomem *base;
-+ bool ret = false;
-+ int addr = 0x1ff;
-+ unsigned int len;
-+ u32 hdr_u32;
-+ u8 *hdr = (u8 *) &hdr_u32;
-+ u8 mac[6] = { 0x00, 0x02, 0x03, 0x04, 0x05, 0x06 };
-+ int mac_start = 2, mac_end = 8;
-+
-+ BUG_ON(!soc_is_ar933x() && !soc_is_ar934x());
-+ base = ioremap_nocache(AR93XX_WMAC_BASE, AR93XX_WMAC_SIZE);
-+ while (addr > sizeof(hdr_u32)) {
-+ if (!ar93xx_wmac_otp_read(base, addr, hdr, sizeof(hdr_u32)))
-+ break;
-+
-+ if (hdr_u32 == 0 || hdr_u32 == ~0)
-+ break;
-+
-+ len = (hdr[1] << 4) | (hdr[2] >> 4);
-+ addr -= 4;
-+
-+ switch (hdr[0] >> 5) {
-+ case 0:
-+ if (len < mac_end)
-+ break;
-+
-+ ar93xx_wmac_otp_read(base, addr - mac_start, mac, 6);
-+ ret = true;
-+ break;
-+ case 3:
-+ ret |= ar93xx_wmac_otp_uncompress(base, addr, len, mac,
-+ mac_start, 6);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ addr -= len + 2;
-+ }
-+
-+ iounmap(base);
-+ if (ret)
-+ memcpy(dest, mac, 6);
-+
-+ return ret;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -14,5 +14,6 @@
-
- void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
- void ath79_register_wmac_simple(void);
-+bool ar93xx_wmac_read_mac_address(u8 *dest);
-
- #endif /* _ATH79_DEV_WMAC_H */
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -112,6 +112,14 @@
- #define QCA955X_EHCI1_BASE 0x1b400000
- #define QCA955X_EHCI_SIZE 0x1000
-
-+#define AR9300_OTP_BASE 0x14000
-+#define AR9300_OTP_STATUS 0x15f18
-+#define AR9300_OTP_STATUS_TYPE 0x7
-+#define AR9300_OTP_STATUS_VALID 0x4
-+#define AR9300_OTP_STATUS_ACCESS_BUSY 0x2
-+#define AR9300_OTP_STATUS_SM_BUSY 0x1
-+#define AR9300_OTP_READ_DATA 0x15f1c
-+
- /*
- * DDR_CTRL block
- */
-@@ -149,6 +157,13 @@
- #define AR934X_DDR_REG_FLUSH_PCIE 0xa8
- #define AR934X_DDR_REG_FLUSH_WMAC 0xac
-
-+#define AR934X_OTP_BASE 0x30000
-+#define AR934X_OTP_STATUS 0x31018
-+#define AR934X_OTP_READ_DATA 0x3101c
-+#define AR934X_OTP_INTF2_ADDRESS 0x31008
-+#define AR934X_OTP_INTF3_ADDRESS 0x3100c
-+#define AR934X_OTP_PGENB_SETUP_HOLD_TIME_ADDRESS 0x31034
-+
- /*
- * PLL block
- */
diff --git a/target/linux/ar71xx/patches-4.14/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch b/target/linux/ar71xx/patches-4.14/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch
deleted file mode 100644
index 91e037e247..0000000000
--- a/target/linux/ar71xx/patches-4.14/524-MIPS-ath79-add-ath79_wmac_disable_25ghz-helpers.patch
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -309,6 +309,16 @@ bool __init ar93xx_wmac_read_mac_address
- return ret;
- }
-
-+void __init ath79_wmac_disable_2ghz(void)
-+{
-+ ath79_wmac_data.disable_2ghz = true;
-+}
-+
-+void __init ath79_wmac_disable_5ghz(void)
-+{
-+ ath79_wmac_data.disable_5ghz = true;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -14,6 +14,9 @@
-
- void ath79_register_wmac(u8 *cal_data, u8 *mac_addr);
- void ath79_register_wmac_simple(void);
-+void ath79_wmac_disable_2ghz(void);
-+void ath79_wmac_disable_5ghz(void);
-+
- bool ar93xx_wmac_read_mac_address(u8 *dest);
-
- #endif /* _ATH79_DEV_WMAC_H */
diff --git a/target/linux/ar71xx/patches-4.14/525-MIPS-ath79-enable-qca-usb-quirks.patch b/target/linux/ar71xx/patches-4.14/525-MIPS-ath79-enable-qca-usb-quirks.patch
deleted file mode 100644
index 3cafbe290c..0000000000
--- a/target/linux/ar71xx/patches-4.14/525-MIPS-ath79-enable-qca-usb-quirks.patch
+++ /dev/null
@@ -1,101 +0,0 @@
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -37,6 +37,8 @@ static struct usb_ehci_pdata ath79_ehci_
- static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
- .caps_offset = 0x100,
- .has_tt = 1,
-+ .qca_force_host_mode = 1,
-+ .qca_force_16bit_ptw = 1,
- };
-
- static void __init ath79_usb_register(const char *name, int id,
-@@ -159,6 +161,9 @@ static void __init ar913x_usb_setup(void
- ath79_device_reset_clear(AR913X_RESET_USB_PHY);
- mdelay(10);
-
-+ ath79_ehci_pdata_v2.qca_force_host_mode = 0;
-+ ath79_ehci_pdata_v2.qca_force_16bit_ptw = 0;
-+
- ath79_usb_register("ehci-platform", -1,
- AR913X_EHCI_BASE, AR913X_EHCI_SIZE,
- ATH79_CPU_IRQ(3),
-@@ -182,14 +187,34 @@ static void __init ar933x_usb_setup(void
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
- }
-
--static void __init ar934x_usb_setup(void)
-+static void enable_tx_tx_idp_violation_fix(unsigned base)
- {
-- u32 bootstrap;
-+ void __iomem *phy_reg;
-+ u32 t;
-+
-+ phy_reg = ioremap(base, 4);
-+ if (!phy_reg)
-+ return;
-+
-+ t = ioread32(phy_reg);
-+ t &= ~0xff;
-+ t |= 0x58;
-+ iowrite32(t, phy_reg);
-+
-+ iounmap(phy_reg);
-+}
-
-- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
-+static void ar934x_usb_reset_notifier(struct platform_device *pdev)
-+{
-+ if (pdev->id != -1)
- return;
-
-+ enable_tx_tx_idp_violation_fix(0x18116c94);
-+ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
-+}
-+
-+static void __init ar934x_usb_setup(void)
-+{
- ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
- udelay(1000);
-
-@@ -202,14 +227,40 @@ static void __init ar934x_usb_setup(void
- ath79_device_reset_clear(AR934X_RESET_USB_HOST);
- udelay(1000);
-
-+ if (ath79_soc_rev >= 3)
-+ ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier;
-+
- ath79_usb_register("ehci-platform", -1,
- AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
- ATH79_CPU_IRQ(3),
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
- }
-
-+static void qca955x_usb_reset_notifier(struct platform_device *pdev)
-+{
-+ u32 base;
-+
-+ switch (pdev->id) {
-+ case 0:
-+ base = 0x18116d94;
-+ break;
-+
-+ case 1:
-+ base = 0x18116e54;
-+ break;
-+
-+ default:
-+ return;
-+ }
-+
-+ enable_tx_tx_idp_violation_fix(base);
-+ dev_info(&pdev->dev, "TX-TX IDP fix enabled\n");
-+}
-+
- static void __init qca955x_usb_setup(void)
- {
-+ ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier;
-+
- ath79_usb_register("ehci-platform", 0,
- QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
- ATH79_IP3_IRQ(0),
diff --git a/target/linux/ar71xx/patches-4.14/601-MIPS-ath79-add-more-register-defines.patch b/target/linux/ar71xx/patches-4.14/601-MIPS-ath79-add-more-register-defines.patch
deleted file mode 100644
index d0f5b78901..0000000000
--- a/target/linux/ar71xx/patches-4.14/601-MIPS-ath79-add-more-register-defines.patch
+++ /dev/null
@@ -1,455 +0,0 @@
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -20,6 +20,10 @@
- #include <linux/bitops.h>
-
- #define AR71XX_APB_BASE 0x18000000
-+#define AR71XX_GE0_BASE 0x19000000
-+#define AR71XX_GE0_SIZE 0x10000
-+#define AR71XX_GE1_BASE 0x1a000000
-+#define AR71XX_GE1_SIZE 0x10000
- #define AR71XX_EHCI_BASE 0x1b000000
- #define AR71XX_EHCI_SIZE 0x1000
- #define AR71XX_OHCI_BASE 0x1c000000
-@@ -39,6 +43,8 @@
- #define AR71XX_PLL_SIZE 0x100
- #define AR71XX_RESET_BASE (AR71XX_APB_BASE + 0x00060000)
- #define AR71XX_RESET_SIZE 0x100
-+#define AR71XX_MII_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR71XX_MII_SIZE 0x100
-
- #define AR71XX_PCI_MEM_BASE 0x10000000
- #define AR71XX_PCI_MEM_SIZE 0x07000000
-@@ -81,15 +87,21 @@
-
- #define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
- #define AR933X_UART_SIZE 0x14
-+#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR933X_GMAC_SIZE 0x04
- #define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define AR933X_WMAC_SIZE 0x20000
- #define AR933X_EHCI_BASE 0x1b000000
- #define AR933X_EHCI_SIZE 0x1000
-
-+#define AR934X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define AR934X_GMAC_SIZE 0x14
- #define AR934X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define AR934X_WMAC_SIZE 0x20000
- #define AR934X_EHCI_BASE 0x1b000000
- #define AR934X_EHCI_SIZE 0x200
-+#define AR934X_NFC_BASE 0x1b000200
-+#define AR934X_NFC_SIZE 0xb8
- #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
- #define AR934X_SRIF_SIZE 0x1000
-
-@@ -106,11 +118,15 @@
- #define QCA955X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000)
- #define QCA955X_PCI_CTRL_SIZE 0x100
-
-+#define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA955X_GMAC_SIZE 0x40
- #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define QCA955X_WMAC_SIZE 0x20000
- #define QCA955X_EHCI0_BASE 0x1b000000
- #define QCA955X_EHCI1_BASE 0x1b400000
- #define QCA955X_EHCI_SIZE 0x1000
-+#define QCA955X_NFC_BASE 0x1b800200
-+#define QCA955X_NFC_SIZE 0xb8
-
- #define AR9300_OTP_BASE 0x14000
- #define AR9300_OTP_STATUS 0x15f18
-@@ -181,6 +197,9 @@
- #define AR71XX_AHB_DIV_SHIFT 20
- #define AR71XX_AHB_DIV_MASK 0x7
-
-+#define AR71XX_ETH0_PLL_SHIFT 17
-+#define AR71XX_ETH1_PLL_SHIFT 19
-+
- #define AR724X_PLL_REG_CPU_CONFIG 0x00
- #define AR724X_PLL_REG_PCIE_CONFIG 0x10
-
-@@ -196,6 +215,8 @@
- #define AR724X_DDR_DIV_SHIFT 22
- #define AR724X_DDR_DIV_MASK 0x3
-
-+#define AR7242_PLL_REG_ETH0_INT_CLOCK 0x2c
-+
- #define AR913X_PLL_REG_CPU_CONFIG 0x00
- #define AR913X_PLL_REG_ETH_CONFIG 0x04
- #define AR913X_PLL_REG_ETH0_INT_CLOCK 0x14
-@@ -208,6 +229,9 @@
- #define AR913X_AHB_DIV_SHIFT 19
- #define AR913X_AHB_DIV_MASK 0x1
-
-+#define AR913X_ETH0_PLL_SHIFT 20
-+#define AR913X_ETH1_PLL_SHIFT 22
-+
- #define AR933X_PLL_CPU_CONFIG_REG 0x00
- #define AR933X_PLL_CLOCK_CTRL_REG 0x08
-
-@@ -229,6 +253,8 @@
- #define AR934X_PLL_CPU_CONFIG_REG 0x00
- #define AR934X_PLL_DDR_CONFIG_REG 0x04
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_REG 0x08
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24
-+#define AR934X_PLL_ETH_XMII_CONTROL_REG 0x2c
-
- #define AR934X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
- #define AR934X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-@@ -261,9 +287,13 @@
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
-+
- #define QCA955X_PLL_CPU_CONFIG_REG 0x00
- #define QCA955X_PLL_DDR_CONFIG_REG 0x04
- #define QCA955X_PLL_CLK_CTRL_REG 0x08
-+#define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
-+#define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
-
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-@@ -388,16 +418,83 @@
- #define AR913X_RESET_USB_HOST BIT(5)
- #define AR913X_RESET_USB_PHY BIT(4)
-
-+#define AR933X_RESET_GE1_MDIO BIT(23)
-+#define AR933X_RESET_GE0_MDIO BIT(22)
-+#define AR933X_RESET_GE1_MAC BIT(13)
- #define AR933X_RESET_WMAC BIT(11)
-+#define AR933X_RESET_GE0_MAC BIT(9)
- #define AR933X_RESET_USB_HOST BIT(5)
- #define AR933X_RESET_USB_PHY BIT(4)
- #define AR933X_RESET_USBSUS_OVERRIDE BIT(3)
-
-+#define AR934X_RESET_HOST BIT(31)
-+#define AR934X_RESET_SLIC BIT(30)
-+#define AR934X_RESET_HDMA BIT(29)
-+#define AR934X_RESET_EXTERNAL BIT(28)
-+#define AR934X_RESET_RTC BIT(27)
-+#define AR934X_RESET_PCIE_EP_INT BIT(26)
-+#define AR934X_RESET_CHKSUM_ACC BIT(25)
-+#define AR934X_RESET_FULL_CHIP BIT(24)
-+#define AR934X_RESET_GE1_MDIO BIT(23)
-+#define AR934X_RESET_GE0_MDIO BIT(22)
-+#define AR934X_RESET_CPU_NMI BIT(21)
-+#define AR934X_RESET_CPU_COLD BIT(20)
-+#define AR934X_RESET_HOST_RESET_INT BIT(19)
-+#define AR934X_RESET_PCIE_EP BIT(18)
-+#define AR934X_RESET_UART1 BIT(17)
-+#define AR934X_RESET_DDR BIT(16)
-+#define AR934X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define AR934X_RESET_NANDF BIT(14)
-+#define AR934X_RESET_GE1_MAC BIT(13)
-+#define AR934X_RESET_ETH_SWITCH_ANALOG BIT(12)
- #define AR934X_RESET_USB_PHY_ANALOG BIT(11)
-+#define AR934X_RESET_HOST_DMA_INT BIT(10)
-+#define AR934X_RESET_GE0_MAC BIT(9)
-+#define AR934X_RESET_ETH_SWITCH BIT(8)
-+#define AR934X_RESET_PCIE_PHY BIT(7)
-+#define AR934X_RESET_PCIE BIT(6)
- #define AR934X_RESET_USB_HOST BIT(5)
- #define AR934X_RESET_USB_PHY BIT(4)
- #define AR934X_RESET_USBSUS_OVERRIDE BIT(3)
-+#define AR934X_RESET_LUT BIT(2)
-+#define AR934X_RESET_MBOX BIT(1)
-+#define AR934X_RESET_I2S BIT(0)
-+
-+#define QCA955X_RESET_HOST BIT(31)
-+#define QCA955X_RESET_SLIC BIT(30)
-+#define QCA955X_RESET_HDMA BIT(29)
-+#define QCA955X_RESET_EXTERNAL BIT(28)
-+#define QCA955X_RESET_RTC BIT(27)
-+#define QCA955X_RESET_PCIE_EP_INT BIT(26)
-+#define QCA955X_RESET_CHKSUM_ACC BIT(25)
-+#define QCA955X_RESET_FULL_CHIP BIT(24)
-+#define QCA955X_RESET_GE1_MDIO BIT(23)
-+#define QCA955X_RESET_GE0_MDIO BIT(22)
-+#define QCA955X_RESET_CPU_NMI BIT(21)
-+#define QCA955X_RESET_CPU_COLD BIT(20)
-+#define QCA955X_RESET_HOST_RESET_INT BIT(19)
-+#define QCA955X_RESET_PCIE_EP BIT(18)
-+#define QCA955X_RESET_UART1 BIT(17)
-+#define QCA955X_RESET_DDR BIT(16)
-+#define QCA955X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define QCA955X_RESET_NANDF BIT(14)
-+#define QCA955X_RESET_GE1_MAC BIT(13)
-+#define QCA955X_RESET_SGMII_ANALOG BIT(12)
-+#define QCA955X_RESET_USB_PHY_ANALOG BIT(11)
-+#define QCA955X_RESET_HOST_DMA_INT BIT(10)
-+#define QCA955X_RESET_GE0_MAC BIT(9)
-+#define QCA955X_RESET_SGMII BIT(8)
-+#define QCA955X_RESET_PCIE_PHY BIT(7)
-+#define QCA955X_RESET_PCIE BIT(6)
-+#define QCA955X_RESET_USB_HOST BIT(5)
-+#define QCA955X_RESET_USB_PHY BIT(4)
-+#define QCA955X_RESET_USBSUS_OVERRIDE BIT(3)
-+#define QCA955X_RESET_LUT BIT(2)
-+#define QCA955X_RESET_MBOX BIT(1)
-+#define QCA955X_RESET_I2S BIT(0)
-
-+#define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
-+#define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
- #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
-
- #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
-@@ -539,8 +636,22 @@
- #define AR71XX_GPIO_REG_INT_ENABLE 0x24
- #define AR71XX_GPIO_REG_FUNC 0x28
-
-+#define AR934X_GPIO_REG_OUT_FUNC0 0x2c
-+#define AR934X_GPIO_REG_OUT_FUNC1 0x30
-+#define AR934X_GPIO_REG_OUT_FUNC2 0x34
-+#define AR934X_GPIO_REG_OUT_FUNC3 0x38
-+#define AR934X_GPIO_REG_OUT_FUNC4 0x3c
-+#define AR934X_GPIO_REG_OUT_FUNC5 0x40
- #define AR934X_GPIO_REG_FUNC 0x6c
-
-+#define QCA955X_GPIO_REG_OUT_FUNC0 0x2c
-+#define QCA955X_GPIO_REG_OUT_FUNC1 0x30
-+#define QCA955X_GPIO_REG_OUT_FUNC2 0x34
-+#define QCA955X_GPIO_REG_OUT_FUNC3 0x38
-+#define QCA955X_GPIO_REG_OUT_FUNC4 0x3c
-+#define QCA955X_GPIO_REG_OUT_FUNC5 0x40
-+#define QCA955X_GPIO_REG_FUNC 0x6c
-+
- #define AR71XX_GPIO_COUNT 16
- #define AR7240_GPIO_COUNT 18
- #define AR7241_GPIO_COUNT 20
-@@ -570,4 +681,235 @@
- #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
- #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
-
-+#define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
-+#define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
-+#define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
-+#define AR71XX_GPIO_FUNC_SPI_CS1_EN BIT(12)
-+#define AR71XX_GPIO_FUNC_UART_EN BIT(8)
-+#define AR71XX_GPIO_FUNC_USB_OC_EN BIT(4)
-+#define AR71XX_GPIO_FUNC_USB_CLK_EN BIT(0)
-+
-+#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN BIT(19)
-+#define AR724X_GPIO_FUNC_SPI_EN BIT(18)
-+#define AR724X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-+#define AR724X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-+#define AR724X_GPIO_FUNC_CLK_OBS5_EN BIT(12)
-+#define AR724X_GPIO_FUNC_CLK_OBS4_EN BIT(11)
-+#define AR724X_GPIO_FUNC_CLK_OBS3_EN BIT(10)
-+#define AR724X_GPIO_FUNC_CLK_OBS2_EN BIT(9)
-+#define AR724X_GPIO_FUNC_CLK_OBS1_EN BIT(8)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-+#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-+#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-+#define AR724X_GPIO_FUNC_UART_EN BIT(1)
-+#define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-+
-+#define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22)
-+#define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21)
-+#define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20)
-+#define AR913X_GPIO_FUNC_I2S_MCKEN BIT(19)
-+#define AR913X_GPIO_FUNC_I2S1_EN BIT(18)
-+#define AR913X_GPIO_FUNC_I2S0_EN BIT(17)
-+#define AR913X_GPIO_FUNC_SLIC_EN BIT(16)
-+#define AR913X_GPIO_FUNC_UART_RTSCTS_EN BIT(9)
-+#define AR913X_GPIO_FUNC_UART_EN BIT(8)
-+#define AR913X_GPIO_FUNC_USB_CLK_EN BIT(4)
-+
-+#define AR933X_GPIO_FUNC_SPDIF2TCK BIT(31)
-+#define AR933X_GPIO_FUNC_SPDIF_EN BIT(30)
-+#define AR933X_GPIO_FUNC_I2SO_22_18_EN BIT(29)
-+#define AR933X_GPIO_FUNC_I2S_MCK_EN BIT(27)
-+#define AR933X_GPIO_FUNC_I2SO_EN BIT(26)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_DUPL BIT(25)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_COLL BIT(24)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED_ACT BIT(23)
-+#define AR933X_GPIO_FUNC_SPI_EN BIT(18)
-+#define AR933X_GPIO_FUNC_SPI_CS_EN2 BIT(14)
-+#define AR933X_GPIO_FUNC_SPI_CS_EN1 BIT(13)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN BIT(7)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN BIT(6)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN BIT(5)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN BIT(4)
-+#define AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN BIT(3)
-+#define AR933X_GPIO_FUNC_UART_RTS_CTS_EN BIT(2)
-+#define AR933X_GPIO_FUNC_UART_EN BIT(1)
-+#define AR933X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-+
-+#define AR934X_GPIO_FUNC_CLK_OBS7_EN BIT(9)
-+#define AR934X_GPIO_FUNC_CLK_OBS6_EN BIT(8)
-+#define AR934X_GPIO_FUNC_CLK_OBS5_EN BIT(7)
-+#define AR934X_GPIO_FUNC_CLK_OBS4_EN BIT(6)
-+#define AR934X_GPIO_FUNC_CLK_OBS3_EN BIT(5)
-+#define AR934X_GPIO_FUNC_CLK_OBS2_EN BIT(4)
-+#define AR934X_GPIO_FUNC_CLK_OBS1_EN BIT(3)
-+#define AR934X_GPIO_FUNC_CLK_OBS0_EN BIT(2)
-+#define AR934X_GPIO_FUNC_JTAG_DISABLE BIT(1)
-+
-+#define AR934X_GPIO_OUT_GPIO 0
-+#define AR934X_GPIO_OUT_SPI_CS1 7
-+#define AR934X_GPIO_OUT_LED_LINK0 41
-+#define AR934X_GPIO_OUT_LED_LINK1 42
-+#define AR934X_GPIO_OUT_LED_LINK2 43
-+#define AR934X_GPIO_OUT_LED_LINK3 44
-+#define AR934X_GPIO_OUT_LED_LINK4 45
-+#define AR934X_GPIO_OUT_EXT_LNA0 46
-+#define AR934X_GPIO_OUT_EXT_LNA1 47
-+
-+#define QCA955X_GPIO_FUNC_CLK_OBS7_EN BIT(9)
-+#define QCA955X_GPIO_FUNC_CLK_OBS6_EN BIT(8)
-+#define QCA955X_GPIO_FUNC_CLK_OBS5_EN BIT(7)
-+#define QCA955X_GPIO_FUNC_CLK_OBS4_EN BIT(6)
-+#define QCA955X_GPIO_FUNC_CLK_OBS3_EN BIT(5)
-+#define QCA955X_GPIO_FUNC_CLK_OBS2_EN BIT(4)
-+#define QCA955X_GPIO_FUNC_CLK_OBS1_EN BIT(3)
-+#define QCA955X_GPIO_FUNC_JTAG_DISABLE BIT(1)
-+
-+#define QCA955X_GPIO_OUT_GPIO 0
-+#define QCA955X_MII_EXT_MDI 1
-+#define QCA955X_SLIC_DATA_OUT 3
-+#define QCA955X_SLIC_PCM_FS 4
-+#define QCA955X_SLIC_PCM_CLK 5
-+#define QCA955X_SPI_CLK 8
-+#define QCA955X_SPI_CS_0 9
-+#define QCA955X_SPI_CS_1 10
-+#define QCA955X_SPI_CS_2 11
-+#define QCA955X_SPI_MISO 12
-+#define QCA955X_I2S_CLK 13
-+#define QCA955X_I2S_WS 14
-+#define QCA955X_I2S_SD 15
-+#define QCA955X_I2S_MCK 16
-+#define QCA955X_SPDIF_OUT 17
-+#define QCA955X_UART1_TD 18
-+#define QCA955X_UART1_RTS 19
-+#define QCA955X_UART1_RD 20
-+#define QCA955X_UART1_CTS 21
-+#define QCA955X_UART0_SOUT 22
-+#define QCA955X_SPDIF2_OUT 23
-+#define QCA955X_LED_SGMII_SPEED0 24
-+#define QCA955X_LED_SGMII_SPEED1 25
-+#define QCA955X_LED_SGMII_DUPLEX 26
-+#define QCA955X_LED_SGMII_LINK_UP 27
-+#define QCA955X_SGMII_SPEED0_INVERT 28
-+#define QCA955X_SGMII_SPEED1_INVERT 29
-+#define QCA955X_SGMII_DUPLEX_INVERT 30
-+#define QCA955X_SGMII_LINK_UP_INVERT 31
-+#define QCA955X_GE1_MII_MDO 32
-+#define QCA955X_GE1_MII_MDC 33
-+#define QCA955X_SWCOM2 38
-+#define QCA955X_SWCOM3 39
-+#define QCA955X_MAC2_GPIO 40
-+#define QCA955X_MAC3_GPIO 41
-+#define QCA955X_ATT_LED 42
-+#define QCA955X_PWR_LED 43
-+#define QCA955X_TX_FRAME 44
-+#define QCA955X_RX_CLEAR_EXTERNAL 45
-+#define QCA955X_LED_NETWORK_EN 46
-+#define QCA955X_LED_POWER_EN 47
-+#define QCA955X_WMAC_GLUE_WOW 68
-+#define QCA955X_RX_CLEAR_EXTENSION 70
-+#define QCA955X_CP_NAND_CS1 73
-+#define QCA955X_USB_SUSPEND 74
-+#define QCA955X_ETH_TX_ERR 75
-+#define QCA955X_DDR_DQ_OE 76
-+#define QCA955X_CLKREQ_N_EP 77
-+#define QCA955X_CLKREQ_N_RC 78
-+#define QCA955X_CLK_OBS0 79
-+#define QCA955X_CLK_OBS1 80
-+#define QCA955X_CLK_OBS2 81
-+#define QCA955X_CLK_OBS3 82
-+#define QCA955X_CLK_OBS4 83
-+#define QCA955X_CLK_OBS5 84
-+
-+/*
-+ * MII_CTRL block
-+ */
-+#define AR71XX_MII_REG_MII0_CTRL 0x00
-+#define AR71XX_MII_REG_MII1_CTRL 0x04
-+
-+#define AR71XX_MII_CTRL_IF_MASK 3
-+#define AR71XX_MII_CTRL_SPEED_SHIFT 4
-+#define AR71XX_MII_CTRL_SPEED_MASK 3
-+#define AR71XX_MII_CTRL_SPEED_10 0
-+#define AR71XX_MII_CTRL_SPEED_100 1
-+#define AR71XX_MII_CTRL_SPEED_1000 2
-+
-+#define AR71XX_MII0_CTRL_IF_GMII 0
-+#define AR71XX_MII0_CTRL_IF_MII 1
-+#define AR71XX_MII0_CTRL_IF_RGMII 2
-+#define AR71XX_MII0_CTRL_IF_RMII 3
-+
-+#define AR71XX_MII1_CTRL_IF_RGMII 0
-+#define AR71XX_MII1_CTRL_IF_RMII 1
-+
-+/*
-+ * AR933X GMAC interface
-+ */
-+#define AR933X_GMAC_REG_ETH_CFG 0x00
-+
-+#define AR933X_ETH_CFG_RGMII_GE0 BIT(0)
-+#define AR933X_ETH_CFG_MII_GE0 BIT(1)
-+#define AR933X_ETH_CFG_GMII_GE0 BIT(2)
-+#define AR933X_ETH_CFG_MII_GE0_MASTER BIT(3)
-+#define AR933X_ETH_CFG_MII_GE0_SLAVE BIT(4)
-+#define AR933X_ETH_CFG_MII_GE0_ERR_EN BIT(5)
-+#define AR933X_ETH_CFG_SW_PHY_SWAP BIT(7)
-+#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(8)
-+#define AR933X_ETH_CFG_RMII_GE0 BIT(9)
-+#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0
-+#define AR933X_ETH_CFG_RMII_GE0_SPD_100 BIT(10)
-+
-+/*
-+ * AR934X GMAC Interface
-+ */
-+#define AR934X_GMAC_REG_ETH_CFG 0x00
-+
-+#define AR934X_ETH_CFG_RGMII_GMAC0 BIT(0)
-+#define AR934X_ETH_CFG_MII_GMAC0 BIT(1)
-+#define AR934X_ETH_CFG_GMII_GMAC0 BIT(2)
-+#define AR934X_ETH_CFG_MII_GMAC0_MASTER BIT(3)
-+#define AR934X_ETH_CFG_MII_GMAC0_SLAVE BIT(4)
-+#define AR934X_ETH_CFG_MII_GMAC0_ERR_EN BIT(5)
-+#define AR934X_ETH_CFG_SW_ONLY_MODE BIT(6)
-+#define AR934X_ETH_CFG_SW_PHY_SWAP BIT(7)
-+#define AR934X_ETH_CFG_SW_APB_ACCESS BIT(9)
-+#define AR934X_ETH_CFG_RMII_GMAC0 BIT(10)
-+#define AR933X_ETH_CFG_MII_CNTL_SPEED BIT(11)
-+#define AR934X_ETH_CFG_RMII_GMAC0_MASTER BIT(12)
-+#define AR933X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-+#define AR934X_ETH_CFG_RXD_DELAY BIT(14)
-+#define AR934X_ETH_CFG_RXD_DELAY_MASK 0x3
-+#define AR934X_ETH_CFG_RXD_DELAY_SHIFT 14
-+#define AR934X_ETH_CFG_RDV_DELAY BIT(16)
-+#define AR934X_ETH_CFG_RDV_DELAY_MASK 0x3
-+#define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16
-+
-+/*
-+ * QCA955X GMAC Interface
-+ */
-+
-+#define QCA955X_GMAC_REG_ETH_CFG 0x00
-+
-+#define QCA955X_ETH_CFG_RGMII_EN BIT(0)
-+#define QCA955X_ETH_CFG_MII_GE0 BIT(1)
-+#define QCA955X_ETH_CFG_GMII_GE0 BIT(2)
-+#define QCA955X_ETH_CFG_MII_GE0_MASTER BIT(3)
-+#define QCA955X_ETH_CFG_MII_GE0_SLAVE BIT(4)
-+#define QCA955X_ETH_CFG_GE0_ERR_EN BIT(5)
-+#define QCA955X_ETH_CFG_GE0_SGMII BIT(6)
-+#define QCA955X_ETH_CFG_RMII_GE0 BIT(10)
-+#define QCA955X_ETH_CFG_MII_CNTL_SPEED BIT(11)
-+#define QCA955X_ETH_CFG_RMII_GE0_MASTER BIT(12)
-+#define QCA955X_ETH_CFG_RXD_DELAY_MASK 0x3
-+#define QCA955X_ETH_CFG_RXD_DELAY_SHIFT 14
-+#define QCA955X_ETH_CFG_RDV_DELAY BIT(16)
-+#define QCA955X_ETH_CFG_RDV_DELAY_MASK 0x3
-+#define QCA955X_ETH_CFG_RDV_DELAY_SHIFT 16
-+#define QCA955X_ETH_CFG_TXD_DELAY_MASK 0x3
-+#define QCA955X_ETH_CFG_TXD_DELAY_SHIFT 18
-+#define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
-+#define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
-+
- #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/patches-4.14/602-MIPS-ath79-add-openwrt-stuff.patch b/target/linux/ar71xx/patches-4.14/602-MIPS-ath79-add-openwrt-stuff.patch
deleted file mode 100644
index 047be0c7fd..0000000000
--- a/target/linux/ar71xx/patches-4.14/602-MIPS-ath79-add-openwrt-stuff.patch
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -99,6 +99,20 @@ config SOC_QCA955X
- select PCI_AR724X if PCI
- def_bool n
-
-+config ATH79_DEV_M25P80
-+ select ATH79_DEV_SPI
-+ def_bool n
-+
-+config ATH79_DEV_AP9X_PCI
-+ select ATH79_PCI_ATH9K_FIXUP
-+ def_bool n
-+
-+config ATH79_DEV_DSA
-+ def_bool n
-+
-+config ATH79_DEV_ETH
-+ def_bool n
-+
- config PCI_AR724X
- def_bool n
-
-@@ -108,6 +122,10 @@ config ATH79_DEV_GPIO_BUTTONS
- config ATH79_DEV_LEDS_GPIO
- def_bool n
-
-+config ATH79_DEV_NFC
-+ depends on (SOC_AR934X || SOC_QCA955X)
-+ def_bool n
-+
- config ATH79_DEV_SPI
- def_bool n
-
-@@ -118,4 +136,14 @@ config ATH79_DEV_WMAC
- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
- def_bool n
-
-+config ATH79_NVRAM
-+ def_bool n
-+
-+config ATH79_PCI_ATH9K_FIXUP
-+ def_bool n
-+
-+config ATH79_ROUTERBOOT
-+ select LZO_DECOMPRESS
-+ def_bool n
-+
- endif
diff --git a/target/linux/ar71xx/patches-4.14/603-MIPS-ath79-ap121-fixes.patch b/target/linux/ar71xx/patches-4.14/603-MIPS-ath79-ap121-fixes.patch
deleted file mode 100644
index 672f38e938..0000000000
--- a/target/linux/ar71xx/patches-4.14/603-MIPS-ath79-ap121-fixes.patch
+++ /dev/null
@@ -1,149 +0,0 @@
---- a/arch/mips/ath79/mach-ap121.c
-+++ b/arch/mips/ath79/mach-ap121.c
-@@ -1,19 +1,21 @@
- /*
- * Atheros AP121 board support
- *
-- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- */
-
--#include "machtypes.h"
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
-+#include "dev-m25p80.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
-+#include "machtypes.h"
-
- #define AP121_GPIO_LED_WLAN 0
- #define AP121_GPIO_LED_USB 1
-@@ -24,7 +26,14 @@
- #define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
- #define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
-
--#define AP121_CAL_DATA_ADDR 0x1fff1000
-+#define AP121_MAC0_OFFSET 0x0000
-+#define AP121_MAC1_OFFSET 0x0006
-+#define AP121_CALDATA_OFFSET 0x1000
-+#define AP121_WMAC_MAC_OFFSET 0x1002
-+
-+#define AP121_MINI_GPIO_LED_WLAN 0
-+#define AP121_MINI_GPIO_BTN_JUMPSTART 12
-+#define AP121_MINI_GPIO_BTN_RESET 11
-
- static struct gpio_led ap121_leds_gpio[] __initdata = {
- {
-@@ -58,35 +67,78 @@ static struct gpio_keys_button ap121_gpi
- }
- };
-
--static struct spi_board_info ap121_spi_info[] = {
-+static struct gpio_led ap121_mini_leds_gpio[] __initdata = {
- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l1606e",
-- }
-+ .name = "ap121:green:wlan",
-+ .gpio = AP121_MINI_GPIO_LED_WLAN,
-+ .active_low = 0,
-+ },
- };
-
--static struct ath79_spi_platform_data ap121_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
-+static struct gpio_keys_button ap121_mini_gpio_keys[] __initdata = {
-+ {
-+ .desc = "jumpstart button",
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = AP121_MINI_GPIO_BTN_JUMPSTART,
-+ .active_low = 1,
-+ },
-+ {
-+ .desc = "reset button",
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-+ .gpio = AP121_MINI_GPIO_BTN_RESET,
-+ .active_low = 1,
-+ }
- };
-
-+static void __init ap121_common_setup(void)
-+{
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+ ath79_register_m25p80(NULL);
-+ ath79_register_wmac(art + AP121_CALDATA_OFFSET,
-+ art + AP121_WMAC_MAC_OFFSET);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP121_MAC0_OFFSET, 0);
-+ ath79_init_mac(ath79_eth1_data.mac_addr, art + AP121_MAC1_OFFSET, 0);
-+
-+ ath79_register_mdio(0, 0x0);
-+
-+ /* LAN ports */
-+ ath79_register_eth(1);
-+
-+ /* WAN port */
-+ ath79_register_eth(0);
-+}
-+
- static void __init ap121_setup(void)
- {
-- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
-+ ap121_common_setup();
-
- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
- ap121_leds_gpio);
- ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(ap121_gpio_keys),
- ap121_gpio_keys);
--
-- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
-- ARRAY_SIZE(ap121_spi_info));
- ath79_register_usb();
-- ath79_register_wmac(cal_data, NULL);
- }
-
- MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
- ap121_setup);
-+
-+static void __init ap121_mini_setup(void)
-+{
-+ ap121_common_setup();
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_mini_leds_gpio),
-+ ap121_mini_leds_gpio);
-+ ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ap121_mini_gpio_keys),
-+ ap121_mini_gpio_keys);
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_AP121_MINI, "AP121-MINI", "Atheros AP121-MINI",
-+ ap121_mini_setup);
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -6,9 +6,10 @@ menu "Atheros AR71XX/AR724X/AR913X machi
- config ATH79_MACH_AP121
- bool "Atheros AP121 reference board"
- select SOC_AR933X
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
diff --git a/target/linux/ar71xx/patches-4.14/604-MIPS-ath79-no-of.patch b/target/linux/ar71xx/patches-4.14/604-MIPS-ath79-no-of.patch
deleted file mode 100644
index 2e7d5d8232..0000000000
--- a/target/linux/ar71xx/patches-4.14/604-MIPS-ath79-no-of.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -203,7 +203,6 @@ config ATH79
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_MIPS16
- select SYS_SUPPORTS_ZBOOT_UART_PROM
-- select USE_OF
- help
- Support for the Atheros AR71XX/AR724X/AR913X SoCs.
-
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -190,16 +190,20 @@ unsigned int get_c0_compare_int(void)
-
- void __init plat_mem_setup(void)
- {
-+#ifdef CONFIG_OF
- unsigned long fdt_start;
-+#endif
-
- set_io_port_base(KSEG1);
-
-+#ifdef CONFIG_OF
- /* Get the position of the FDT passed by the bootloader */
- fdt_start = fw_getenvl("fdt_start");
- if (fdt_start)
- __dt_setup_arch((void *)KSEG0ADDR(fdt_start));
- else if (fw_passed_dtb)
- __dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb));
-+#endif
-
- if (mips_machtype != ATH79_MACH_GENERIC_OF) {
- ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
-@@ -295,17 +299,21 @@ static int __init ath79_setup(void)
-
- arch_initcall(ath79_setup);
-
-+#ifdef CONFIG_OF
- void __init device_tree_init(void)
- {
- unflatten_and_copy_device_tree();
- }
-+#endif
-
- MIPS_MACHINE(ATH79_MACH_GENERIC,
- "Generic",
- "Generic AR71XX/AR724X/AR913X based board",
- NULL);
-
-+#ifdef CONFIG_OF
- MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
- "DTB",
- "Generic AR71XX/AR724X/AR913X based board (DT)",
- NULL);
-+#endif
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -32,10 +32,12 @@
- #define AR724X_BASE_FREQ 40000000
-
- static struct clk *clks[ATH79_CLK_END];
-+#ifdef CONFIG_OF
- static struct clk_onecell_data clk_data = {
- .clks = clks,
- .clk_num = ARRAY_SIZE(clks),
- };
-+#endif
-
- static struct clk *__init ath79_add_sys_clkdev(
- const char *id, unsigned long rate)
diff --git a/target/linux/ar71xx/patches-4.14/605-MIPS-ath79-db120-fixes.patch b/target/linux/ar71xx/patches-4.14/605-MIPS-ath79-db120-fixes.patch
deleted file mode 100644
index 44335f2ff7..0000000000
--- a/target/linux/ar71xx/patches-4.14/605-MIPS-ath79-db120-fixes.patch
+++ /dev/null
@@ -1,204 +0,0 @@
---- a/arch/mips/ath79/mach-db120.c
-+++ b/arch/mips/ath79/mach-db120.c
-@@ -2,7 +2,7 @@
- * Atheros DB120 reference board support
- *
- * Copyright (c) 2011 Qualcomm Atheros
-- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (c) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
-@@ -19,16 +19,26 @@
- */
-
- #include <linux/pci.h>
-+#include <linux/phy.h>
-+#include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-+#include <linux/ar8216_platform.h>
-
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "dev-ap9x-pci.h"
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
-+#include "dev-m25p80.h"
-+#include "dev-nfc.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
--#include "pci.h"
-+#include "machtypes.h"
-
-+#define DB120_GPIO_LED_USB 11
- #define DB120_GPIO_LED_WLAN_5G 12
- #define DB120_GPIO_LED_WLAN_2G 13
- #define DB120_GPIO_LED_STATUS 14
-@@ -39,8 +49,10 @@
- #define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
- #define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
-
--#define DB120_WMAC_CALDATA_OFFSET 0x1000
--#define DB120_PCIE_CALDATA_OFFSET 0x5000
-+#define DB120_MAC0_OFFSET 0
-+#define DB120_MAC1_OFFSET 6
-+#define DB120_WMAC_CALDATA_OFFSET 0x1000
-+#define DB120_PCIE_CALDATA_OFFSET 0x5000
-
- static struct gpio_led db120_leds_gpio[] __initdata = {
- {
-@@ -63,6 +75,11 @@ static struct gpio_led db120_leds_gpio[]
- .gpio = DB120_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
-+ {
-+ .name = "db120:green:usb",
-+ .gpio = DB120_GPIO_LED_USB,
-+ .active_low = 1,
-+ }
- };
-
- static struct gpio_keys_button db120_gpio_keys[] __initdata = {
-@@ -76,60 +93,85 @@ static struct gpio_keys_button db120_gpi
- },
- };
-
--static struct spi_board_info db120_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "s25sl064a",
-- }
-+static struct ar8327_pad_cfg db120_ar8327_pad0_cfg = {
-+ .mode = AR8327_PAD_MAC_RGMII,
-+ .txclk_delay_en = true,
-+ .rxclk_delay_en = true,
-+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- };
-
--static struct ath79_spi_platform_data db120_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
-+static struct ar8327_led_cfg db120_ar8327_led_cfg = {
-+ .led_ctrl0 = 0x00000000,
-+ .led_ctrl1 = 0xc737c737,
-+ .led_ctrl2 = 0x00000000,
-+ .led_ctrl3 = 0x00c30c00,
-+ .open_drain = true,
- };
-
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data db120_ath9k_data;
--
--static int db120_pci_plat_dev_init(struct pci_dev *dev)
--{
-- switch (PCI_SLOT(dev->devfn)) {
-- case 0:
-- dev->dev.platform_data = &db120_ath9k_data;
-- break;
-- }
--
-- return 0;
--}
--
--static void __init db120_pci_init(u8 *eeprom)
--{
-- memcpy(db120_ath9k_data.eeprom_data, eeprom,
-- sizeof(db120_ath9k_data.eeprom_data));
-+static struct ar8327_platform_data db120_ar8327_data = {
-+ .pad0_cfg = &db120_ar8327_pad0_cfg,
-+ .port0_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
-+ .led_cfg = &db120_ar8327_led_cfg,
-+};
-
-- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
-- ath79_register_pci();
--}
--#else
--static inline void db120_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
-+static struct mdio_board_info db120_mdio0_info[] = {
-+ {
-+ .bus_id = "ag71xx-mdio.0",
-+ .mdio_addr = 0,
-+ .platform_data = &db120_ar8327_data,
-+ },
-+};
-
- static void __init db120_setup(void)
- {
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-+ ath79_gpio_output_select(DB120_GPIO_LED_USB, AR934X_GPIO_OUT_GPIO);
-+ ath79_register_m25p80(NULL);
-+
- ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
- db120_leds_gpio);
- ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
- ARRAY_SIZE(db120_gpio_keys),
- db120_gpio_keys);
-- ath79_register_spi(&db120_spi_data, db120_spi_info,
-- ARRAY_SIZE(db120_spi_info));
- ath79_register_usb();
- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET, NULL);
-- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
-+ ap91_pci_init(art + DB120_PCIE_CALDATA_OFFSET, NULL);
-+
-+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
-+ AR934X_ETH_CFG_SW_ONLY_MODE);
-+
-+ ath79_register_mdio(1, 0x0);
-+ ath79_register_mdio(0, 0x0);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + DB120_MAC0_OFFSET, 0);
-+
-+ mdiobus_register_board_info(db120_mdio0_info,
-+ ARRAY_SIZE(db120_mdio0_info));
-+
-+ /* GMAC0 is connected to an AR8327 switch */
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = BIT(0);
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+ ath79_eth0_pll_data.pll_1000 = 0x06000000;
-+ ath79_register_eth(0);
-+
-+ /* GMAC1 is connected to the internal switch */
-+ ath79_init_mac(ath79_eth1_data.mac_addr, art + DB120_MAC1_OFFSET, 0);
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
-+ ath79_eth1_data.speed = SPEED_1000;
-+ ath79_eth1_data.duplex = DUPLEX_FULL;
-+
-+ ath79_register_eth(1);
-+
-+ ath79_register_nfc();
- }
-
- MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -43,9 +43,12 @@ config ATH79_MACH_AP81
- config ATH79_MACH_DB120
- bool "Atheros DB120 reference board"
- select SOC_AR934X
-+ select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
-+ select ATH79_DEV_NFC
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
diff --git a/target/linux/ar71xx/patches-4.14/606-MIPS-ath79-pb44-fixes.patch b/target/linux/ar71xx/patches-4.14/606-MIPS-ath79-pb44-fixes.patch
deleted file mode 100644
index c9cb7e5c00..0000000000
--- a/target/linux/ar71xx/patches-4.14/606-MIPS-ath79-pb44-fixes.patch
+++ /dev/null
@@ -1,144 +0,0 @@
---- a/arch/mips/ath79/mach-pb44.c
-+++ b/arch/mips/ath79/mach-pb44.c
-@@ -8,23 +8,47 @@
- * by the Free Software Foundation.
- */
-
-+#include <linux/delay.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/i2c.h>
- #include <linux/i2c-gpio.h>
- #include <linux/platform_data/pcf857x.h>
-+#include <linux/spi/flash.h>
-+#include <linux/spi/vsc7385.h>
-
- #include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+#include <asm/mach-ath79/ath79.h>
-+#include "dev-eth.h"
- #include "dev-gpio-buttons.h"
- #include "dev-leds-gpio.h"
- #include "dev-spi.h"
- #include "dev-usb.h"
-+#include "machtypes.h"
- #include "pci.h"
-
- #define PB44_GPIO_I2C_SCL 0
- #define PB44_GPIO_I2C_SDA 1
-
-+#define PB44_PCF8757_VSC7395_CS 0
-+#define PB44_PCF8757_STEREO_CS 1
-+#define PB44_PCF8757_SLIC_CS0 2
-+#define PB44_PCF8757_SLIC_TEST 3
-+#define PB44_PCF8757_SLIC_INT0 4
-+#define PB44_PCF8757_SLIC_INT1 5
-+#define PB44_PCF8757_SW_RESET 6
-+#define PB44_PCF8757_SW_JUMP 8
-+#define PB44_PCF8757_LED_JUMP1 9
-+#define PB44_PCF8757_LED_JUMP2 10
-+#define PB44_PCF8757_TP24 11
-+#define PB44_PCF8757_TP25 12
-+#define PB44_PCF8757_TP26 13
-+#define PB44_PCF8757_TP27 14
-+#define PB44_PCF8757_TP28 15
-+
- #define PB44_GPIO_EXP_BASE 16
-+#define PB44_GPIO_VSC7395_CS (PB44_GPIO_EXP_BASE + PB44_PCF8757_VSC7395_CS)
- #define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
- #define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
- #define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
-@@ -87,20 +111,59 @@ static struct gpio_keys_button pb44_gpio
- }
- };
-
-+static void pb44_vsc7395_reset(void)
-+{
-+ ath79_device_reset_set(AR71XX_RESET_GE1_PHY);
-+ udelay(10);
-+ ath79_device_reset_clear(AR71XX_RESET_GE1_PHY);
-+ mdelay(50);
-+}
-+
-+static struct vsc7385_platform_data pb44_vsc7395_data = {
-+ .reset = pb44_vsc7395_reset,
-+ .ucode_name = "vsc7395_ucode_pb44.bin",
-+ .mac_cfg = {
-+ .tx_ipg = 6,
-+ .bit2 = 1,
-+ .clk_sel = 0,
-+ },
-+};
-+
-+static const char *pb44_part_probes[] = {
-+ "RedBoot",
-+ NULL,
-+};
-+
-+static struct flash_platform_data pb44_flash_data = {
-+ .part_probes = pb44_part_probes,
-+};
-+
- static struct spi_board_info pb44_spi_info[] = {
- {
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 25000000,
- .modalias = "m25p64",
-+ .platform_data = &pb44_flash_data,
- },
-+ {
-+ .bus_num = 0,
-+ .chip_select = 1,
-+ .max_speed_hz = 25000000,
-+ .modalias = "spi-vsc7385",
-+ .platform_data = &pb44_vsc7395_data,
-+ }
- };
-
- static struct ath79_spi_platform_data pb44_spi_data = {
- .bus_num = 0,
-- .num_chipselect = 1,
-+ .num_chipselect = 2,
- };
-
-+#define PB44_WAN_PHYMASK BIT(0)
-+#define PB44_LAN_PHYMASK 0
-+#define PB44_MDIO_PHYMASK (PB44_LAN_PHYMASK | PB44_WAN_PHYMASK)
-+
- static void __init pb44_init(void)
- {
- i2c_register_board_info(0, pb44_i2c_board_info,
-@@ -116,6 +179,22 @@ static void __init pb44_init(void)
- ARRAY_SIZE(pb44_spi_info));
- ath79_register_usb();
- ath79_register_pci();
-+
-+ ath79_register_mdio(0, ~PB44_MDIO_PHYMASK);
-+
-+ ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = PB44_WAN_PHYMASK;
-+
-+ ath79_register_eth(0);
-+
-+ ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth1_data.speed = SPEED_1000;
-+ ath79_eth1_data.duplex = DUPLEX_FULL;
-+ ath79_eth1_pll_data.pll_1000 = 0x110000;
-+
-+ ath79_register_eth(1);
- }
-
- MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -58,6 +58,7 @@ config ATH79_MACH_DB120
- config ATH79_MACH_PB44
- bool "Atheros PB44 reference board"
- select SOC_AR71XX
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_SPI
diff --git a/target/linux/ar71xx/patches-4.14/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-4.14/607-MIPS-ath79-ubnt-xm-fixes.patch
deleted file mode 100644
index 4699c82746..0000000000
--- a/target/linux/ar71xx/patches-4.14/607-MIPS-ath79-ubnt-xm-fixes.patch
+++ /dev/null
@@ -1,14 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -70,9 +70,10 @@ config ATH79_MACH_PB44
- config ATH79_MACH_UBNT_XM
- bool "Ubiquiti Networks XM (rev 1.0) board"
- select SOC_AR724X
-+ select ATH79_DEV_AP9X_PCI if PCI
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-+ select ATH79_DEV_M25P80
- help
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
diff --git a/target/linux/ar71xx/patches-4.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-4.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
deleted file mode 100644
index b33db4dd0d..0000000000
--- a/target/linux/ar71xx/patches-4.14/608-MIPS-ath79-ubnt-xm-add-more-boards.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -68,12 +68,16 @@ config ATH79_MACH_PB44
- Atheros PB44 reference board.
-
- config ATH79_MACH_UBNT_XM
-- bool "Ubiquiti Networks XM (rev 1.0) board"
-+ bool "Ubiquiti Networks XM/UniFi boards"
- select SOC_AR724X
-+ select SOC_AR934X
- select ATH79_DEV_AP9X_PCI if PCI
-+ select ATH79_DEV_ETH
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
- select ATH79_DEV_M25P80
-+ select ATH79_DEV_USB
-+ select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
diff --git a/target/linux/ar71xx/patches-4.14/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-4.14/609-MIPS-ath79-ap136-fixes.patch
deleted file mode 100644
index 7f3a242cad..0000000000
--- a/target/linux/ar71xx/patches-4.14/609-MIPS-ath79-ap136-fixes.patch
+++ /dev/null
@@ -1,300 +0,0 @@
---- a/arch/mips/ath79/mach-ap136.c
-+++ b/arch/mips/ath79/mach-ap136.c
-@@ -18,23 +18,29 @@
- *
- */
-
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/ar8216_platform.h>
-
--#include "machtypes.h"
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#include "common.h"
-+#include "pci.h"
-+#include "dev-ap9x-pci.h"
- #include "dev-gpio-buttons.h"
-+#include "dev-eth.h"
- #include "dev-leds-gpio.h"
--#include "dev-spi.h"
-+#include "dev-m25p80.h"
-+#include "dev-nfc.h"
- #include "dev-usb.h"
- #include "dev-wmac.h"
--#include "pci.h"
-+#include "machtypes.h"
-
--#define AP136_GPIO_LED_STATUS_RED 14
--#define AP136_GPIO_LED_STATUS_GREEN 19
- #define AP136_GPIO_LED_USB 4
--#define AP136_GPIO_LED_WLAN_2G 13
- #define AP136_GPIO_LED_WLAN_5G 12
-+#define AP136_GPIO_LED_WLAN_2G 13
-+#define AP136_GPIO_LED_STATUS_RED 14
- #define AP136_GPIO_LED_WPS_RED 15
-+#define AP136_GPIO_LED_STATUS_GREEN 19
- #define AP136_GPIO_LED_WPS_GREEN 20
-
- #define AP136_GPIO_BTN_WPS 16
-@@ -43,37 +49,39 @@
- #define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
- #define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
-
--#define AP136_WMAC_CALDATA_OFFSET 0x1000
--#define AP136_PCIE_CALDATA_OFFSET 0x5000
-+#define AP136_MAC0_OFFSET 0
-+#define AP136_MAC1_OFFSET 6
-+#define AP136_WMAC_CALDATA_OFFSET 0x1000
-+#define AP136_PCIE_CALDATA_OFFSET 0x5000
-
- static struct gpio_led ap136_leds_gpio[] __initdata = {
- {
-- .name = "qca:green:status",
-+ .name = "ap136:green:status",
- .gpio = AP136_GPIO_LED_STATUS_GREEN,
- .active_low = 1,
- },
- {
-- .name = "qca:red:status",
-+ .name = "ap136:red:status",
- .gpio = AP136_GPIO_LED_STATUS_RED,
- .active_low = 1,
- },
- {
-- .name = "qca:green:wps",
-+ .name = "ap136:green:wps",
- .gpio = AP136_GPIO_LED_WPS_GREEN,
- .active_low = 1,
- },
- {
-- .name = "qca:red:wps",
-+ .name = "ap136:red:wps",
- .gpio = AP136_GPIO_LED_WPS_RED,
- .active_low = 1,
- },
- {
-- .name = "qca:red:wlan-2g",
-+ .name = "ap136:red:wlan-2g",
- .gpio = AP136_GPIO_LED_WLAN_2G,
- .active_low = 1,
- },
- {
-- .name = "qca:red:usb",
-+ .name = "ap136:red:usb",
- .gpio = AP136_GPIO_LED_USB,
- .active_low = 1,
- }
-@@ -98,59 +106,151 @@ static struct gpio_keys_button ap136_gpi
- },
- };
-
--static struct spi_board_info ap136_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l6405d",
-- }
-+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg;
-+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg;
-+
-+static struct ar8327_platform_data ap136_ar8327_data = {
-+ .pad0_cfg = &ap136_ar8327_pad0_cfg,
-+ .pad6_cfg = &ap136_ar8327_pad6_cfg,
-+ .port0_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
-+ .port6_cfg = {
-+ .force_link = 1,
-+ .speed = AR8327_PORT_SPEED_1000,
-+ .duplex = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ },
- };
-
--static struct ath79_spi_platform_data ap136_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
-+static struct mdio_board_info ap136_mdio0_info[] = {
-+ {
-+ .bus_id = "ag71xx-mdio.0",
-+ .mdio_addr = 0,
-+ .platform_data = &ap136_ar8327_data,
-+ },
- };
-
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
-+static void __init ap136_common_setup(void)
-+{
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-+
-+ ath79_register_m25p80(NULL);
-+
-+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
-+ ap136_leds_gpio);
-+ ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
-+ ARRAY_SIZE(ap136_gpio_keys),
-+ ap136_gpio_keys);
-+
-+ ath79_register_usb();
-+ ath79_register_nfc();
-+
-+ ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET, NULL);
-+
-+ ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
-
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
-+ ath79_register_mdio(0, 0x0);
-+ ath79_init_mac(ath79_eth0_data.mac_addr, art + AP136_MAC0_OFFSET, 0);
-+
-+ mdiobus_register_board_info(ap136_mdio0_info,
-+ ARRAY_SIZE(ap136_mdio0_info));
-+
-+ /* GMAC0 is connected to the RMGII interface */
-+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-+ ath79_eth0_data.phy_mask = BIT(0);
-+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
-+
-+ ath79_register_eth(0);
-+
-+ /* GMAC1 is connected tot eh SGMII interface */
-+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
-+ ath79_eth1_data.speed = SPEED_1000;
-+ ath79_eth1_data.duplex = DUPLEX_FULL;
-+
-+ ath79_register_eth(1);
-+}
-+
-+static void __init ap136_010_setup(void)
- {
-- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
-- dev->dev.platform_data = &ap136_ath9k_data;
-+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-- return 0;
-+ /* GMAC0 of the AR8327 switch is connected to GMAC0 via RGMII */
-+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
-+ ap136_ar8327_pad0_cfg.txclk_delay_en = true;
-+ ap136_ar8327_pad0_cfg.rxclk_delay_en = true;
-+ ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
-+ ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-+
-+ /* GMAC6 of the AR8327 switch is connected to GMAC1 via SGMII */
-+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
-+
-+ ath79_eth0_pll_data.pll_1000 = 0xa6000000;
-+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
-+
-+ ap136_common_setup();
-+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
- }
-
--static void __init ap136_pci_init(u8 *eeprom)
-+MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
-+ "Atheros AP136-010 reference board",
-+ ap136_010_setup);
-+
-+static void __init ap136_020_common_setup(void)
- {
-- memcpy(ap136_ath9k_data.eeprom_data, eeprom,
-- sizeof(ap136_ath9k_data.eeprom_data));
-+ /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
-+ ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
-+ ap136_ar8327_pad0_cfg.sgmii_delay_en = true;
-+
-+ /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
-+ ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_RGMII;
-+ ap136_ar8327_pad6_cfg.txclk_delay_en = true;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
-+ ap136_ar8327_pad6_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
-+ ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
-
-- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
-- ath79_register_pci();
-+ ath79_eth0_pll_data.pll_1000 = 0x56000000;
-+ ath79_eth1_pll_data.pll_1000 = 0x03000101;
-+
-+ ap136_common_setup();
- }
--#else
--static inline void ap136_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
-
--static void __init ap136_setup(void)
-+static void __init ap136_020_setup(void)
- {
- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
-
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
-- ap136_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(ap136_gpio_keys),
-- ap136_gpio_keys);
-- ath79_register_spi(&ap136_spi_data, ap136_spi_info,
-- ARRAY_SIZE(ap136_spi_info));
-- ath79_register_usb();
-- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
-- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
-+ ap136_020_common_setup();
-+ ap91_pci_init(art + AP136_PCIE_CALDATA_OFFSET, NULL);
- }
-
--MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
-- "Atheros AP136-010 reference board",
-- ap136_setup);
-+MIPS_MACHINE(ATH79_MACH_AP136_020, "AP136-020",
-+ "Atheros AP136-020 reference board",
-+ ap136_020_setup);
-+
-+/*
-+ * AP135-020 is similar to AP136-020, any future AP135 specific init
-+ * code can be added here.
-+ */
-+static void __init ap135_020_setup(void)
-+{
-+ ap136_leds_gpio[0].name = "ap135:green:status";
-+ ap136_leds_gpio[1].name = "ap135:red:status";
-+ ap136_leds_gpio[2].name = "ap135:green:wps";
-+ ap136_leds_gpio[3].name = "ap135:red:wps";
-+ ap136_leds_gpio[4].name = "ap135:red:wlan-2g";
-+ ap136_leds_gpio[5].name = "ap135:red:usb";
-+
-+ ap136_020_common_setup();
-+ ath79_register_pci();
-+}
-+
-+MIPS_MACHINE(ATH79_MACH_AP135_020, "AP135-020",
-+ "Atheros AP135-020 reference board",
-+ ap135_020_setup);
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -17,16 +17,17 @@ config ATH79_MACH_AP121
- Atheros AP121 reference board.
-
- config ATH79_MACH_AP136
-- bool "Atheros AP136 reference board"
-+ bool "Atheros AP136/AP135 reference board"
- select SOC_QCA955X
- select ATH79_DEV_GPIO_BUTTONS
- select ATH79_DEV_LEDS_GPIO
-+ select ATH79_DEV_NFC
- select ATH79_DEV_SPI
- select ATH79_DEV_USB
- select ATH79_DEV_WMAC
- help
- Say 'Y' here if you want your kernel to support the
-- Atheros AP136 reference board.
-+ Atheros AP136 or AP135 reference boards.
-
- config ATH79_MACH_AP81
- bool "Atheros AP81 reference board"
diff --git a/target/linux/ar71xx/patches-4.14/611-MIPS-ath79-wdt-timeout.patch b/target/linux/ar71xx/patches-4.14/611-MIPS-ath79-wdt-timeout.patch
deleted file mode 100644
index 0927d5a977..0000000000
--- a/target/linux/ar71xx/patches-4.14/611-MIPS-ath79-wdt-timeout.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-MIPS: ath79: fix maximum timeout
-
-If the userland tries to set a timeout higher than the max_timeout, then we should fallback to max_timeout.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-
---- a/drivers/watchdog/ath79_wdt.c
-+++ b/drivers/watchdog/ath79_wdt.c
-@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi
-
- static int ath79_wdt_set_timeout(int val)
- {
-- if (val < 1 || val > max_timeout)
-+ if (val < 1)
- return -EINVAL;
-
-- timeout = val;
-+ if (val > max_timeout)
-+ timeout = max_timeout;
-+ else
-+ timeout = val;
-+
- ath79_wdt_keepalive();
-
- return 0;
diff --git a/target/linux/ar71xx/patches-4.14/612-MIPS-ath79-set-buffalo-txgain.patch b/target/linux/ar71xx/patches-4.14/612-MIPS-ath79-set-buffalo-txgain.patch
deleted file mode 100644
index 3d100e0549..0000000000
--- a/target/linux/ar71xx/patches-4.14/612-MIPS-ath79-set-buffalo-txgain.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -319,6 +319,11 @@ void __init ath79_wmac_disable_5ghz(void
- ath79_wmac_data.disable_5ghz = true;
- }
-
-+void __init ath79_wmac_set_tx_gain_buffalo(void)
-+{
-+ ath79_wmac_data.tx_gain_buffalo = true;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -16,6 +16,7 @@ void ath79_register_wmac(u8 *cal_data, u
- void ath79_register_wmac_simple(void);
- void ath79_wmac_disable_2ghz(void);
- void ath79_wmac_disable_5ghz(void);
-+void ath79_wmac_set_tx_gain_buffalo(void);
-
- bool ar93xx_wmac_read_mac_address(u8 *dest);
-
diff --git a/target/linux/ar71xx/patches-4.14/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch b/target/linux/ar71xx/patches-4.14/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch
deleted file mode 100644
index 5c1205d59f..0000000000
--- a/target/linux/ar71xx/patches-4.14/613-MIPS-ath79-add-ath79_wmac_setup_ext_lna_gpio-helper.patch
+++ /dev/null
@@ -1,76 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -18,9 +18,11 @@
- #include <linux/etherdevice.h>
- #include <linux/platform_device.h>
- #include <linux/ath9k_platform.h>
-+#include <linux/gpio.h>
-
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-+#include "common.h"
- #include "dev-wmac.h"
-
- static u8 ath79_wmac_mac[ETH_ALEN];
-@@ -324,6 +326,51 @@ void __init ath79_wmac_set_tx_gain_buffa
- ath79_wmac_data.tx_gain_buffalo = true;
- }
-
-+static int ath79_request_ext_lna_gpio(unsigned chain, int gpio)
-+{
-+ char *label;
-+ int err;
-+
-+ label = kasprintf(GFP_KERNEL, "external LNA%u", chain);
-+ if (!label)
-+ return -ENOMEM;
-+
-+ err = gpio_request_one(gpio, GPIOF_DIR_OUT | GPIOF_INIT_LOW, label);
-+ if (err) {
-+ pr_err("unable to request GPIO%d for external LNA%u\n",
-+ gpio, chain);
-+ kfree(label);
-+ }
-+
-+ return err;
-+}
-+
-+static void ar934x_set_ext_lna_gpio(unsigned chain, int gpio)
-+{
-+ unsigned int sel;
-+ int err;
-+
-+ if (WARN_ON(chain > 1))
-+ return;
-+
-+ err = ath79_request_ext_lna_gpio(chain, gpio);
-+ if (err)
-+ return;
-+
-+ if (chain == 0)
-+ sel = AR934X_GPIO_OUT_EXT_LNA0;
-+ else
-+ sel = AR934X_GPIO_OUT_EXT_LNA1;
-+
-+ ath79_gpio_output_select(gpio, sel);
-+}
-+
-+void __init ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio)
-+{
-+ if (soc_is_ar934x())
-+ ar934x_set_ext_lna_gpio(chain, gpio);
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -17,6 +17,7 @@ void ath79_register_wmac_simple(void);
- void ath79_wmac_disable_2ghz(void);
- void ath79_wmac_disable_5ghz(void);
- void ath79_wmac_set_tx_gain_buffalo(void);
-+void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio);
-
- bool ar93xx_wmac_read_mac_address(u8 *dest);
-
diff --git a/target/linux/ar71xx/patches-4.14/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-4.14/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
deleted file mode 100644
index 722d127ec5..0000000000
--- a/target/linux/ar71xx/patches-4.14/620-MIPS-ath79-add-support-for-QCA953x-SoC.patch
+++ /dev/null
@@ -1,696 +0,0 @@
-From 5300a7cd7ed2f88488ddba62947b9c6bb9663777 Mon Sep 17 00:00:00 2001
-Message-Id: <5300a7cd7ed2f88488ddba62947b9c6bb9663777.1396122227.git.mschiffer@universe-factory.net>
-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Sat, 29 Mar 2014 20:26:08 +0100
-Subject: [PATCH 1/2] MIPS: ath79: add support for QCA953x SoC
-
-Note that the clock calculation looks very similar to the QCA955x, but the
-meaning of the bits CPUCLK_FROM_CPUPLL and DDRCLK_FROM_DDRPLL is reversed.
----
- arch/mips/ath79/Kconfig | 6 +-
- arch/mips/ath79/clock.c | 78 ++++++++++++++++++++++++++
- arch/mips/ath79/common.c | 4 ++
- arch/mips/ath79/dev-common.c | 1 +
- arch/mips/ath79/dev-wmac.c | 20 +++++++
- arch/mips/ath79/early_printk.c | 1 +
- arch/mips/ath79/gpio.c | 4 +-
- arch/mips/ath79/irq.c | 4 ++
- arch/mips/ath79/setup.c | 8 ++-
- arch/mips/include/asm/mach-ath79/ar71xx_regs.h | 48 ++++++++++++++++
- arch/mips/include/asm/mach-ath79/ath79.h | 11 ++++
- 11 files changed, 182 insertions(+), 3 deletions(-)
-
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -105,6 +105,10 @@ config SOC_AR934X
- select PCI_AR724X if PCI
- def_bool n
-
-+config SOC_QCA953X
-+ select USB_ARCH_HAS_EHCI
-+ def_bool n
-+
- config SOC_QCA955X
- select HW_HAS_PCI
- select PCI_AR724X if PCI
-@@ -144,7 +148,7 @@ config ATH79_DEV_USB
- def_bool n
-
- config ATH79_DEV_WMAC
-- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
-+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X)
- def_bool n
-
- config ATH79_NVRAM
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -357,6 +357,87 @@ static void __init ar934x_clocks_init(vo
- iounmap(dpll_base);
- }
-
-+static void __init qca953x_clocks_init(void)
-+{
-+ unsigned long ref_rate;
-+ unsigned long cpu_rate;
-+ unsigned long ddr_rate;
-+ unsigned long ahb_rate;
-+ u32 pll, out_div, ref_div, nint, frac, clk_ctrl, postdiv;
-+ u32 cpu_pll, ddr_pll;
-+
-+ /* QCA953X only supports 25MHz ref_clk */
-+ ref_rate = 25 * 1000 * 1000;
-+
-+ pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
-+ out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_REFDIV_MASK;
-+ nint = (pll >> QCA953X_PLL_CPU_CONFIG_NINT_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_NINT_MASK;
-+ frac = (pll >> QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT) &
-+ QCA953X_PLL_CPU_CONFIG_NFRAC_MASK;
-+
-+ cpu_pll = nint * ref_rate / ref_div;
-+ cpu_pll += frac * (ref_rate >> 6) / ref_div;
-+ cpu_pll /= (1 << out_div);
-+
-+ pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
-+ out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_REFDIV_MASK;
-+ nint = (pll >> QCA953X_PLL_DDR_CONFIG_NINT_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_NINT_MASK;
-+ frac = (pll >> QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT) &
-+ QCA953X_PLL_DDR_CONFIG_NFRAC_MASK;
-+
-+ ddr_pll = nint * ref_rate / ref_div;
-+ ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
-+ ddr_pll /= (1 << out_div);
-+
-+ clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
-+
-+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
-+ QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
-+ cpu_rate = ref_rate;
-+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL)
-+ cpu_rate = cpu_pll / (postdiv + 1);
-+ else
-+ cpu_rate = ddr_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
-+ QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
-+ ddr_rate = ref_rate;
-+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL)
-+ ddr_rate = ddr_pll / (postdiv + 1);
-+ else
-+ ddr_rate = cpu_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
-+ QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
-+ ahb_rate = ref_rate;
-+ else if (clk_ctrl & QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-+ ahb_rate = ddr_pll / (postdiv + 1);
-+ else
-+ ahb_rate = cpu_pll / (postdiv + 1);
-+
-+ ath79_add_sys_clkdev("ref", ref_rate);
-+ ath79_add_sys_clkdev("cpu", cpu_rate);
-+ ath79_add_sys_clkdev("ddr", ddr_rate);
-+ ath79_add_sys_clkdev("ahb", ahb_rate);
-+
-+ clk_add_alias("wdt", NULL, "ref", NULL);
-+ clk_add_alias("uart", NULL, "ref", NULL);
-+}
-+
- static void __init qca955x_clocks_init(void)
- {
- unsigned long ref_rate;
-@@ -452,6 +533,8 @@ void __init ath79_clocks_init(void)
- ar933x_clocks_init();
- else if (soc_is_ar934x())
- ar934x_clocks_init();
-+ else if (soc_is_qca953x())
-+ qca953x_clocks_init();
- else if (soc_is_qca955x())
- qca955x_clocks_init();
- else
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -103,6 +103,8 @@ void ath79_device_reset_set(u32 mask)
- reg = AR933X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar934x())
- reg = AR934X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca953x())
-+ reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
-@@ -131,6 +133,8 @@ void ath79_device_reset_clear(u32 mask)
- reg = AR933X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar934x())
- reg = AR934X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca953x())
-+ reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
- else
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -94,6 +94,7 @@ void __init ath79_register_uart(void)
- soc_is_ar724x() ||
- soc_is_ar913x() ||
- soc_is_ar934x() ||
-+ soc_is_qca953x() ||
- soc_is_qca955x()) {
- ath79_uart_data[0].uartclk = uart_clk_rate;
- platform_device_register(&ath79_uart_device);
-@@ -157,6 +158,9 @@ void __init ath79_gpio_init(void)
- } else if (soc_is_ar934x()) {
- ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT;
- ath79_gpio_pdata.oe_inverted = 1;
-+ } else if (soc_is_qca953x()) {
-+ ath79_gpio_pdata.ngpios = QCA953X_GPIO_COUNT;
-+ ath79_gpio_pdata.oe_inverted = 1;
- } else if (soc_is_qca955x()) {
- ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
- ath79_gpio_pdata.oe_inverted = 1;
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -236,6 +236,30 @@ static void __init ar934x_usb_setup(void
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
- }
-
-+static void __init qca953x_usb_setup(void)
-+{
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(QCA953X_RESET_REG_BOOTSTRAP);
-+
-+ ath79_device_reset_set(QCA953X_RESET_USBSUS_OVERRIDE);
-+ udelay(1000);
-+
-+ ath79_device_reset_clear(QCA953X_RESET_USB_PHY);
-+ udelay(1000);
-+
-+ ath79_device_reset_clear(QCA953X_RESET_USB_PHY_ANALOG);
-+ udelay(1000);
-+
-+ ath79_device_reset_clear(QCA953X_RESET_USB_HOST);
-+ udelay(1000);
-+
-+ ath79_usb_register("ehci-platform", -1,
-+ QCA953X_EHCI_BASE, QCA953X_EHCI_SIZE,
-+ ATH79_CPU_IRQ(3),
-+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+}
-+
- static void qca955x_usb_reset_notifier(struct platform_device *pdev)
- {
- u32 base;
-@@ -286,6 +310,8 @@ void __init ath79_register_usb(void)
- ar933x_usb_setup();
- else if (soc_is_ar934x())
- ar934x_usb_setup();
-+ else if (soc_is_qca953x())
-+ qca953x_usb_setup();
- else if (soc_is_qca955x())
- qca955x_usb_setup();
- else
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -100,7 +100,7 @@ static int ar933x_wmac_reset(void)
- return -ETIMEDOUT;
- }
-
--static int ar933x_r1_get_wmac_revision(void)
-+static int ar93xx_get_soc_revision(void)
- {
- return ath79_soc_rev;
- }
-@@ -125,7 +125,7 @@ static void __init ar933x_wmac_setup(voi
- ath79_wmac_data.is_clk_25mhz = true;
-
- if (ath79_soc_rev == 1)
-- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
-+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
-
- ath79_wmac_data.external_reset = ar933x_wmac_reset;
- }
-@@ -150,6 +150,21 @@ static void ar934x_wmac_setup(void)
- ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
- }
-
-+static void qca953x_wmac_setup(void)
-+{
-+ ath79_wmac_device.name = "qca953x_wmac";
-+
-+ ath79_wmac_resources[0].start = QCA953X_WMAC_BASE;
-+ ath79_wmac_resources[0].end = QCA953X_WMAC_BASE + QCA953X_WMAC_SIZE - 1;
-+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
-+ ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
-+
-+ /* QCA953X only supports 25MHz ref_clk */
-+ ath79_wmac_data.is_clk_25mhz = true;
-+
-+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
-+}
-+
- static void qca955x_wmac_setup(void)
- {
- u32 t;
-@@ -379,6 +394,8 @@ void __init ath79_register_wmac(u8 *cal_
- ar933x_wmac_setup();
- else if (soc_is_ar934x())
- ar934x_wmac_setup();
-+ else if (soc_is_qca953x())
-+ qca953x_wmac_setup();
- else if (soc_is_qca955x())
- qca955x_wmac_setup();
- else
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -116,6 +116,8 @@ static void prom_putchar_init(void)
- case REV_ID_MAJOR_AR9341:
- case REV_ID_MAJOR_AR9342:
- case REV_ID_MAJOR_AR9344:
-+ case REV_ID_MAJOR_QCA9533:
-+ case REV_ID_MAJOR_QCA9533_V2:
- case REV_ID_MAJOR_QCA9556:
- case REV_ID_MAJOR_QCA9558:
- _prom_putchar = prom_putchar_ar71xx;
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -31,7 +31,7 @@ static void __iomem *ath79_gpio_get_func
- soc_is_ar913x() ||
- soc_is_ar933x())
- reg = AR71XX_GPIO_REG_FUNC;
-- else if (soc_is_ar934x())
-+ else if (soc_is_ar934x() || soc_is_qca953x())
- reg = AR934X_GPIO_REG_FUNC;
- else
- BUG();
-@@ -64,7 +64,7 @@ void __init ath79_gpio_output_select(uns
- unsigned int reg;
- u32 t, s;
-
-- BUG_ON(!soc_is_ar934x());
-+ BUG_ON(!soc_is_ar934x() && !soc_is_qca953x());
-
- if (gpio >= AR934X_GPIO_COUNT)
- return;
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -62,6 +62,34 @@ static void ar934x_ip2_irq_init(void)
- irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
- }
-
-+static void qca953x_ip2_irq_dispatch(struct irq_desc *desc)
-+{
-+ u32 status;
-+
-+ status = ath79_reset_rr(QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS);
-+
-+ if (status & QCA953X_PCIE_WMAC_INT_PCIE_ALL) {
-+ ath79_ddr_wb_flush(3);
-+ generic_handle_irq(ATH79_IP2_IRQ(0));
-+ } else if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) {
-+ ath79_ddr_wb_flush(4);
-+ generic_handle_irq(ATH79_IP2_IRQ(1));
-+ } else {
-+ spurious_interrupt();
-+ }
-+}
-+
-+static void qca953x_irq_init(void)
-+{
-+ int i;
-+
-+ for (i = ATH79_IP2_IRQ_BASE;
-+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+
-+ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch);
-+}
-+
- static void qca955x_ip2_irq_dispatch(struct irq_desc *desc)
- {
- u32 status;
-@@ -149,7 +177,7 @@ void __init arch_init_irq(void)
- soc_is_ar913x() || soc_is_ar933x()) {
- irq_wb_chan2 = 3;
- irq_wb_chan3 = 2;
-- } else if (soc_is_ar934x()) {
-+ } else if (soc_is_ar934x() || soc_is_qca953x()) {
- irq_wb_chan3 = 2;
- }
-
-@@ -160,6 +188,7 @@ void __init arch_init_irq(void)
- else if (soc_is_ar724x() ||
- soc_is_ar933x() ||
- soc_is_ar934x() ||
-+ soc_is_qca953x() ||
- soc_is_qca955x())
- misc_is_ar71xx = false;
- else
-@@ -170,6 +199,8 @@ void __init arch_init_irq(void)
-
- if (soc_is_ar934x())
- ar934x_ip2_irq_init();
-+ else if (soc_is_qca953x())
-+ qca953x_irq_init();
- else if (soc_is_qca955x())
- qca955x_irq_init();
- }
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -60,6 +60,7 @@ static void __init ath79_detect_sys_type
- u32 major;
- u32 minor;
- u32 rev = 0;
-+ u32 ver = 1;
-
- id = ath79_reset_rr(AR71XX_RESET_REG_REV_ID);
- major = id & REV_ID_MAJOR_MASK;
-@@ -152,6 +153,17 @@ static void __init ath79_detect_sys_type
- rev = id & AR934X_REV_ID_REVISION_MASK;
- break;
-
-+ case REV_ID_MAJOR_QCA9533_V2:
-+ ver = 2;
-+ ath79_soc_rev = 2;
-+ /* drop through */
-+
-+ case REV_ID_MAJOR_QCA9533:
-+ ath79_soc = ATH79_SOC_QCA9533;
-+ chip = "9533";
-+ rev = id & QCA953X_REV_ID_REVISION_MASK;
-+ break;
-+
- case REV_ID_MAJOR_QCA9556:
- ath79_soc = ATH79_SOC_QCA9556;
- chip = "9556";
-@@ -168,11 +180,12 @@ static void __init ath79_detect_sys_type
- panic("ath79: unknown SoC, id:0x%08x", id);
- }
-
-- ath79_soc_rev = rev;
-+ if (ver == 1)
-+ ath79_soc_rev = rev;
-
-- if (soc_is_qca955x())
-- sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s rev %u",
-- chip, rev);
-+ if (soc_is_qca953x() || soc_is_qca955x())
-+ sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u",
-+ chip, ver, rev);
- else
- sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
- pr_info("SoC: %s\n", ath79_sys_type);
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -105,6 +105,21 @@
- #define AR934X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
- #define AR934X_SRIF_SIZE 0x1000
-
-+#define QCA953X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA953X_GMAC_SIZE 0x14
-+#define QCA953X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-+#define QCA953X_WMAC_SIZE 0x20000
-+#define QCA953X_EHCI_BASE 0x1b000000
-+#define QCA953X_EHCI_SIZE 0x200
-+#define QCA953X_SRIF_BASE (AR71XX_APB_BASE + 0x00116000)
-+#define QCA953X_SRIF_SIZE 0x1000
-+
-+#define QCA953X_PCI_CFG_BASE0 0x14000000
-+#define QCA953X_PCI_CTRL_BASE0 (AR71XX_APB_BASE + 0x000f0000)
-+#define QCA953X_PCI_CRP_BASE0 (AR71XX_APB_BASE + 0x000c0000)
-+#define QCA953X_PCI_MEM_BASE0 0x10000000
-+#define QCA953X_PCI_MEM_SIZE 0x02000000
-+
- #define QCA955X_PCI_MEM_BASE0 0x10000000
- #define QCA955X_PCI_MEM_BASE1 0x12000000
- #define QCA955X_PCI_MEM_SIZE 0x02000000
-@@ -180,6 +195,12 @@
- #define AR934X_OTP_INTF3_ADDRESS 0x3100c
- #define AR934X_OTP_PGENB_SETUP_HOLD_TIME_ADDRESS 0x31034
-
-+#define QCA953X_DDR_REG_FLUSH_GE0 0x9c
-+#define QCA953X_DDR_REG_FLUSH_GE1 0xa0
-+#define QCA953X_DDR_REG_FLUSH_USB 0xa4
-+#define QCA953X_DDR_REG_FLUSH_PCIE 0xa8
-+#define QCA953X_DDR_REG_FLUSH_WMAC 0xac
-+
- /*
- * PLL block
- */
-@@ -289,6 +310,44 @@
-
- #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
-
-+#define QCA953X_PLL_CPU_CONFIG_REG 0x00
-+#define QCA953X_PLL_DDR_CONFIG_REG 0x04
-+#define QCA953X_PLL_CLK_CTRL_REG 0x08
-+#define QCA953X_PLL_SWITCH_CLOCK_CONTROL_REG 0x24
-+#define QCA953X_PLL_ETH_XMII_CONTROL_REG 0x2c
-+#define QCA953X_PLL_ETH_SGMII_CONTROL_REG 0x48
-+
-+#define QCA953X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
-+#define QCA953X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-+#define QCA953X_PLL_CPU_CONFIG_NINT_SHIFT 6
-+#define QCA953X_PLL_CPU_CONFIG_NINT_MASK 0x3f
-+#define QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
-+#define QCA953X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
-+#define QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA953X_PLL_DDR_CONFIG_NFRAC_SHIFT 0
-+#define QCA953X_PLL_DDR_CONFIG_NFRAC_MASK 0x3ff
-+#define QCA953X_PLL_DDR_CONFIG_NINT_SHIFT 10
-+#define QCA953X_PLL_DDR_CONFIG_NINT_MASK 0x3f
-+#define QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
-+#define QCA953X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
-+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
-+#define QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA953X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
-+#define QCA953X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
-+#define QCA953X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
-+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5
-+#define QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
-+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10
-+#define QCA953X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
-+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15
-+#define QCA953X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
-+#define QCA953X_PLL_CLK_CTRL_CPUCLK_FROM_CPUPLL BIT(20)
-+#define QCA953X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
-+#define QCA953X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-+
- #define QCA955X_PLL_CPU_CONFIG_REG 0x00
- #define QCA955X_PLL_DDR_CONFIG_REG 0x04
- #define QCA955X_PLL_CLK_CTRL_REG 0x08
-@@ -365,6 +424,10 @@
- #define AR934X_RESET_REG_BOOTSTRAP 0xb0
- #define AR934X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-
-+#define QCA953X_RESET_REG_RESET_MODULE 0x1c
-+#define QCA953X_RESET_REG_BOOTSTRAP 0xb0
-+#define QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-+
- #define QCA955X_RESET_REG_RESET_MODULE 0x1c
- #define QCA955X_RESET_REG_BOOTSTRAP 0xb0
- #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
-@@ -460,6 +523,27 @@
- #define AR934X_RESET_MBOX BIT(1)
- #define AR934X_RESET_I2S BIT(0)
-
-+#define QCA953X_RESET_USB_EXT_PWR BIT(29)
-+#define QCA953X_RESET_EXTERNAL BIT(28)
-+#define QCA953X_RESET_RTC BIT(27)
-+#define QCA953X_RESET_FULL_CHIP BIT(24)
-+#define QCA953X_RESET_GE1_MDIO BIT(23)
-+#define QCA953X_RESET_GE0_MDIO BIT(22)
-+#define QCA953X_RESET_CPU_NMI BIT(21)
-+#define QCA953X_RESET_CPU_COLD BIT(20)
-+#define QCA953X_RESET_DDR BIT(16)
-+#define QCA953X_RESET_USB_PHY_PLL_PWD_EXT BIT(15)
-+#define QCA953X_RESET_GE1_MAC BIT(13)
-+#define QCA953X_RESET_ETH_SWITCH_ANALOG BIT(12)
-+#define QCA953X_RESET_USB_PHY_ANALOG BIT(11)
-+#define QCA953X_RESET_GE0_MAC BIT(9)
-+#define QCA953X_RESET_ETH_SWITCH BIT(8)
-+#define QCA953X_RESET_PCIE_PHY BIT(7)
-+#define QCA953X_RESET_PCIE BIT(6)
-+#define QCA953X_RESET_USB_HOST BIT(5)
-+#define QCA953X_RESET_USB_PHY BIT(4)
-+#define QCA953X_RESET_USBSUS_OVERRIDE BIT(3)
-+
- #define QCA955X_RESET_HOST BIT(31)
- #define QCA955X_RESET_SLIC BIT(30)
- #define QCA955X_RESET_HDMA BIT(29)
-@@ -513,6 +597,13 @@
- #define AR934X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
- #define AR934X_BOOTSTRAP_DDR1 BIT(0)
-
-+#define QCA953X_BOOTSTRAP_SW_OPTION2 BIT(12)
-+#define QCA953X_BOOTSTRAP_SW_OPTION1 BIT(11)
-+#define QCA953X_BOOTSTRAP_EJTAG_MODE BIT(5)
-+#define QCA953X_BOOTSTRAP_REF_CLK BIT(4)
-+#define QCA953X_BOOTSTRAP_SDRAM_DISABLED BIT(1)
-+#define QCA953X_BOOTSTRAP_DDR1 BIT(0)
-+
- #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
-
- #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
-@@ -533,6 +624,24 @@
- AR934X_PCIE_WMAC_INT_PCIE_RC1 | AR934X_PCIE_WMAC_INT_PCIE_RC2 | \
- AR934X_PCIE_WMAC_INT_PCIE_RC3)
-
-+#define QCA953X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_TX BIT(1)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_RXHP BIT(3)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC BIT(4)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC0 BIT(5)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC1 BIT(6)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC2 BIT(7)
-+#define QCA953X_PCIE_WMAC_INT_PCIE_RC3 BIT(8)
-+#define QCA953X_PCIE_WMAC_INT_WMAC_ALL \
-+ (QCA953X_PCIE_WMAC_INT_WMAC_MISC | QCA953X_PCIE_WMAC_INT_WMAC_TX | \
-+ QCA953X_PCIE_WMAC_INT_WMAC_RXLP | QCA953X_PCIE_WMAC_INT_WMAC_RXHP)
-+
-+#define QCA953X_PCIE_WMAC_INT_PCIE_ALL \
-+ (QCA953X_PCIE_WMAC_INT_PCIE_RC | QCA953X_PCIE_WMAC_INT_PCIE_RC0 | \
-+ QCA953X_PCIE_WMAC_INT_PCIE_RC1 | QCA953X_PCIE_WMAC_INT_PCIE_RC2 | \
-+ QCA953X_PCIE_WMAC_INT_PCIE_RC3)
-+
- #define QCA955X_EXT_INT_WMAC_MISC BIT(0)
- #define QCA955X_EXT_INT_WMAC_TX BIT(1)
- #define QCA955X_EXT_INT_WMAC_RXLP BIT(2)
-@@ -575,6 +684,8 @@
- #define REV_ID_MAJOR_AR9341 0x0120
- #define REV_ID_MAJOR_AR9342 0x1120
- #define REV_ID_MAJOR_AR9344 0x2120
-+#define REV_ID_MAJOR_QCA9533 0x0140
-+#define REV_ID_MAJOR_QCA9533_V2 0x0160
- #define REV_ID_MAJOR_QCA9556 0x0130
- #define REV_ID_MAJOR_QCA9558 0x1130
-
-@@ -597,6 +708,8 @@
-
- #define AR934X_REV_ID_REVISION_MASK 0xf
-
-+#define QCA953X_REV_ID_REVISION_MASK 0xf
-+
- #define QCA955X_REV_ID_REVISION_MASK 0xf
-
- /*
-@@ -644,6 +757,25 @@
- #define AR934X_GPIO_REG_OUT_FUNC5 0x40
- #define AR934X_GPIO_REG_FUNC 0x6c
-
-+#define QCA953X_GPIO_REG_OUT_FUNC0 0x2c
-+#define QCA953X_GPIO_REG_OUT_FUNC1 0x30
-+#define QCA953X_GPIO_REG_OUT_FUNC2 0x34
-+#define QCA953X_GPIO_REG_OUT_FUNC3 0x38
-+#define QCA953X_GPIO_REG_OUT_FUNC4 0x3c
-+#define QCA953X_GPIO_REG_IN_ENABLE0 0x44
-+#define QCA953X_GPIO_REG_FUNC 0x6c
-+
-+#define QCA953X_GPIO_OUT_MUX_SPI_CS1 10
-+#define QCA953X_GPIO_OUT_MUX_SPI_CS2 11
-+#define QCA953X_GPIO_OUT_MUX_SPI_CS0 9
-+#define QCA953X_GPIO_OUT_MUX_SPI_CLK 8
-+#define QCA953X_GPIO_OUT_MUX_SPI_MOSI 12
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK1 41
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK2 42
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK3 43
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK4 44
-+#define QCA953X_GPIO_OUT_MUX_LED_LINK5 45
-+
- #define QCA955X_GPIO_REG_OUT_FUNC0 0x2c
- #define QCA955X_GPIO_REG_OUT_FUNC1 0x30
- #define QCA955X_GPIO_REG_OUT_FUNC2 0x34
-@@ -658,6 +790,7 @@
- #define AR913X_GPIO_COUNT 22
- #define AR933X_GPIO_COUNT 30
- #define AR934X_GPIO_COUNT 23
-+#define QCA953X_GPIO_COUNT 18
- #define QCA955X_GPIO_COUNT 24
-
- /*
-@@ -681,6 +814,24 @@
- #define AR934X_SRIF_DPLL2_OUTDIV_SHIFT 13
- #define AR934X_SRIF_DPLL2_OUTDIV_MASK 0x7
-
-+#define QCA953X_SRIF_CPU_DPLL1_REG 0x1c0
-+#define QCA953X_SRIF_CPU_DPLL2_REG 0x1c4
-+#define QCA953X_SRIF_CPU_DPLL3_REG 0x1c8
-+
-+#define QCA953X_SRIF_DDR_DPLL1_REG 0x240
-+#define QCA953X_SRIF_DDR_DPLL2_REG 0x244
-+#define QCA953X_SRIF_DDR_DPLL3_REG 0x248
-+
-+#define QCA953X_SRIF_DPLL1_REFDIV_SHIFT 27
-+#define QCA953X_SRIF_DPLL1_REFDIV_MASK 0x1f
-+#define QCA953X_SRIF_DPLL1_NINT_SHIFT 18
-+#define QCA953X_SRIF_DPLL1_NINT_MASK 0x1ff
-+#define QCA953X_SRIF_DPLL1_NFRAC_MASK 0x0003ffff
-+
-+#define QCA953X_SRIF_DPLL2_LOCAL_PLL BIT(30)
-+#define QCA953X_SRIF_DPLL2_OUTDIV_SHIFT 13
-+#define QCA953X_SRIF_DPLL2_OUTDIV_MASK 0x7
-+
- #define AR71XX_GPIO_FUNC_STEREO_EN BIT(17)
- #define AR71XX_GPIO_FUNC_SLIC_EN BIT(16)
- #define AR71XX_GPIO_FUNC_SPI_CS2_EN BIT(13)
-@@ -887,6 +1038,16 @@
- #define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16
-
- /*
-+ * QCA953X GMAC Interface
-+ */
-+#define QCA953X_GMAC_REG_ETH_CFG 0x00
-+
-+#define QCA953X_ETH_CFG_SW_ONLY_MODE BIT(6)
-+#define QCA953X_ETH_CFG_SW_PHY_SWAP BIT(7)
-+#define QCA953X_ETH_CFG_SW_APB_ACCESS BIT(9)
-+#define QCA953X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-+
-+/*
- * QCA955X GMAC Interface
- */
-
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -32,6 +32,7 @@ enum ath79_soc_type {
- ATH79_SOC_AR9341,
- ATH79_SOC_AR9342,
- ATH79_SOC_AR9344,
-+ ATH79_SOC_QCA9533,
- ATH79_SOC_QCA9556,
- ATH79_SOC_QCA9558,
- };
-@@ -100,6 +101,16 @@ static inline int soc_is_ar934x(void)
- return soc_is_ar9341() || soc_is_ar9342() || soc_is_ar9344();
- }
-
-+static inline int soc_is_qca9533(void)
-+{
-+ return ath79_soc == ATH79_SOC_QCA9533;
-+}
-+
-+static inline int soc_is_qca953x(void)
-+{
-+ return soc_is_qca9533();
-+}
-+
- static inline int soc_is_qca9556(void)
- {
- return ath79_soc == ATH79_SOC_QCA9556;
diff --git a/target/linux/ar71xx/patches-4.14/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.14/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
deleted file mode 100644
index 670f7bef0a..0000000000
--- a/target/linux/ar71xx/patches-4.14/621-MIPS-ath79-add-support-for-QCA956x-SoC.patch
+++ /dev/null
@@ -1,717 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -114,6 +114,12 @@ config SOC_QCA955X
- select PCI_AR724X if PCI
- def_bool n
-
-+config SOC_QCA956X
-+ select USB_ARCH_HAS_EHCI
-+ select HW_HAS_PCI
-+ select PCI_AR724X if PCI
-+ def_bool n
-+
- config ATH79_DEV_M25P80
- select ATH79_DEV_SPI
- def_bool n
-@@ -148,7 +154,7 @@ config ATH79_DEV_USB
- def_bool n
-
- config ATH79_DEV_WMAC
-- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X)
-+ depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA953X || SOC_QCA955X || SOC_QCA956X)
- def_bool n
-
- config ATH79_NVRAM
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -523,6 +523,100 @@ static void __init qca955x_clocks_init(v
- clk_add_alias("uart", NULL, "ref", NULL);
- }
-
-+static void __init qca956x_clocks_init(void)
-+{
-+ unsigned long ref_rate;
-+ unsigned long cpu_rate;
-+ unsigned long ddr_rate;
-+ unsigned long ahb_rate;
-+ u32 pll, out_div, ref_div, nint, hfrac, lfrac, clk_ctrl, postdiv;
-+ u32 cpu_pll, ddr_pll;
-+ u32 bootstrap;
-+
-+ bootstrap = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP);
-+ if (bootstrap & QCA956X_BOOTSTRAP_REF_CLK_40)
-+ ref_rate = 40 * 1000 * 1000;
-+ else
-+ ref_rate = 25 * 1000 * 1000;
-+
-+ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
-+ out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
-+
-+ pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
-+ nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
-+ hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK;
-+ lfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT) &
-+ QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK;
-+
-+ cpu_pll = nint * ref_rate / ref_div;
-+ cpu_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
-+ cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
-+ cpu_pll /= (1 << out_div);
-+
-+ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
-+ out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
-+ ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
-+ pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
-+ nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
-+ hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK;
-+ lfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT) &
-+ QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK;
-+
-+ ddr_pll = nint * ref_rate / ref_div;
-+ ddr_pll += (lfrac * ref_rate) / ((ref_div * 25) << 13);
-+ ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
-+ ddr_pll /= (1 << out_div);
-+
-+ clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
-+
-+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
-+ QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS)
-+ cpu_rate = ref_rate;
-+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL)
-+ cpu_rate = ddr_pll / (postdiv + 1);
-+ else
-+ cpu_rate = cpu_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT) &
-+ QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS)
-+ ddr_rate = ref_rate;
-+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL)
-+ ddr_rate = cpu_pll / (postdiv + 1);
-+ else
-+ ddr_rate = ddr_pll / (postdiv + 1);
-+
-+ postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT) &
-+ QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK;
-+
-+ if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS)
-+ ahb_rate = ref_rate;
-+ else if (clk_ctrl & QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL)
-+ ahb_rate = ddr_pll / (postdiv + 1);
-+ else
-+ ahb_rate = cpu_pll / (postdiv + 1);
-+
-+ ath79_add_sys_clkdev("ref", ref_rate);
-+ ath79_add_sys_clkdev("cpu", cpu_rate);
-+ ath79_add_sys_clkdev("ddr", ddr_rate);
-+ ath79_add_sys_clkdev("ahb", ahb_rate);
-+
-+ clk_add_alias("wdt", NULL, "ref", NULL);
-+ clk_add_alias("uart", NULL, "ref", NULL);
-+}
-+
- void __init ath79_clocks_init(void)
- {
- if (soc_is_ar71xx())
-@@ -537,6 +631,8 @@ void __init ath79_clocks_init(void)
- qca953x_clocks_init();
- else if (soc_is_qca955x())
- qca955x_clocks_init();
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ qca956x_clocks_init();
- else
- BUG();
- }
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -107,6 +107,8 @@ void ath79_device_reset_set(u32 mask)
- reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ reg = QCA956X_RESET_REG_RESET_MODULE;
- else
- panic("Reset register not defined for this SOC");
-
-@@ -137,6 +139,8 @@ void ath79_device_reset_clear(u32 mask)
- reg = QCA953X_RESET_REG_RESET_MODULE;
- else if (soc_is_qca955x())
- reg = QCA955X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ reg = QCA956X_RESET_REG_RESET_MODULE;
- else
- panic("Reset register not defined for this SOC");
-
-@@ -163,6 +167,8 @@ u32 ath79_device_reset_get(u32 mask)
- reg = AR933X_RESET_REG_RESET_MODULE;
- else if (soc_is_ar934x())
- reg = AR934X_RESET_REG_RESET_MODULE;
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ reg = QCA956X_RESET_REG_RESET_MODULE;
- else
- BUG();
-
---- a/arch/mips/ath79/dev-common.c
-+++ b/arch/mips/ath79/dev-common.c
-@@ -95,7 +95,9 @@ void __init ath79_register_uart(void)
- soc_is_ar913x() ||
- soc_is_ar934x() ||
- soc_is_qca953x() ||
-- soc_is_qca955x()) {
-+ soc_is_qca955x() ||
-+ soc_is_qca956x() ||
-+ soc_is_tp9343()) {
- ath79_uart_data[0].uartclk = uart_clk_rate;
- platform_device_register(&ath79_uart_device);
- } else if (soc_is_ar933x()) {
-@@ -164,6 +166,9 @@ void __init ath79_gpio_init(void)
- } else if (soc_is_qca955x()) {
- ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
- ath79_gpio_pdata.oe_inverted = 1;
-+ } else if (soc_is_qca956x() || soc_is_tp9343()) {
-+ ath79_gpio_pdata.ngpios = QCA956X_GPIO_COUNT;
-+ ath79_gpio_pdata.oe_inverted = 1;
- } else {
- BUG();
- }
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -296,6 +296,19 @@ static void __init qca955x_usb_setup(voi
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
- }
-
-+static void __init qca956x_usb_setup(void)
-+{
-+ ath79_usb_register("ehci-platform", 0,
-+ QCA956X_EHCI0_BASE, QCA956X_EHCI_SIZE,
-+ ATH79_IP3_IRQ(0),
-+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+
-+ ath79_usb_register("ehci-platform", 1,
-+ QCA956X_EHCI1_BASE, QCA956X_EHCI_SIZE,
-+ ATH79_IP3_IRQ(1),
-+ &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+}
-+
- void __init ath79_register_usb(void)
- {
- if (soc_is_ar71xx())
-@@ -314,6 +327,8 @@ void __init ath79_register_usb(void)
- qca953x_usb_setup();
- else if (soc_is_qca955x())
- qca955x_usb_setup();
-+ else if (soc_is_qca956x())
-+ qca956x_usb_setup();
- else
- BUG();
- }
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -195,6 +195,26 @@ static void qca955x_wmac_setup(void)
- #define AR93XX_OTP_READ_DATA \
- (soc_is_ar934x() ? AR934X_OTP_READ_DATA : AR9300_OTP_READ_DATA)
-
-+static void qca956x_wmac_setup(void)
-+{
-+ u32 t;
-+
-+ ath79_wmac_device.name = "qca956x_wmac";
-+
-+ ath79_wmac_resources[0].start = QCA956X_WMAC_BASE;
-+ ath79_wmac_resources[0].end = QCA956X_WMAC_BASE + QCA956X_WMAC_SIZE - 1;
-+ ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
-+ ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
-+
-+ t = ath79_reset_rr(QCA956X_RESET_REG_BOOTSTRAP);
-+ if (t & QCA956X_BOOTSTRAP_REF_CLK_40)
-+ ath79_wmac_data.is_clk_25mhz = false;
-+ else
-+ ath79_wmac_data.is_clk_25mhz = true;
-+
-+ ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
-+}
-+
- static bool __init
- ar93xx_wmac_otp_read_word(void __iomem *base, int addr, u32 *data)
- {
-@@ -398,6 +418,8 @@ void __init ath79_register_wmac(u8 *cal_
- qca953x_wmac_setup();
- else if (soc_is_qca955x())
- qca955x_wmac_setup();
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ qca956x_wmac_setup();
- else
- BUG();
-
---- a/arch/mips/ath79/early_printk.c
-+++ b/arch/mips/ath79/early_printk.c
-@@ -120,6 +120,8 @@ static void prom_putchar_init(void)
- case REV_ID_MAJOR_QCA9533_V2:
- case REV_ID_MAJOR_QCA9556:
- case REV_ID_MAJOR_QCA9558:
-+ case REV_ID_MAJOR_TP9343:
-+ case REV_ID_MAJOR_QCA956X:
- _prom_putchar = prom_putchar_ar71xx;
- break;
-
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -31,7 +31,10 @@ static void __iomem *ath79_gpio_get_func
- soc_is_ar913x() ||
- soc_is_ar933x())
- reg = AR71XX_GPIO_REG_FUNC;
-- else if (soc_is_ar934x() || soc_is_qca953x())
-+ else if (soc_is_ar934x() ||
-+ soc_is_qca953x() ||
-+ soc_is_qca956x() ||
-+ soc_is_tp9343())
- reg = AR934X_GPIO_REG_FUNC;
- else
- BUG();
-@@ -64,7 +67,7 @@ void __init ath79_gpio_output_select(uns
- unsigned int reg;
- u32 t, s;
-
-- BUG_ON(!soc_is_ar934x() && !soc_is_qca953x());
-+ BUG_ON(!soc_is_ar934x() && !soc_is_qca953x() && !soc_is_qca956x());
-
- if (gpio >= AR934X_GPIO_COUNT)
- return;
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -162,6 +162,87 @@ static void qca955x_irq_init(void)
- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
- }
-
-+static void qca956x_ip2_irq_dispatch(struct irq_desc *desc)
-+{
-+ u32 status;
-+
-+ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
-+ status &= QCA956X_EXT_INT_PCIE_RC1_ALL | QCA956X_EXT_INT_WMAC_ALL;
-+
-+ if (status == 0) {
-+ spurious_interrupt();
-+ return;
-+ }
-+
-+ if (status & QCA956X_EXT_INT_PCIE_RC1_ALL) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP2_IRQ(0));
-+ }
-+
-+ if (status & QCA956X_EXT_INT_WMAC_ALL) {
-+ /* TODO: flsuh DDR? */
-+ generic_handle_irq(ATH79_IP2_IRQ(1));
-+ }
-+}
-+
-+static void qca956x_ip3_irq_dispatch(struct irq_desc *desc)
-+{
-+ u32 status;
-+
-+ status = ath79_reset_rr(QCA956X_RESET_REG_EXT_INT_STATUS);
-+ status &= QCA956X_EXT_INT_PCIE_RC2_ALL |
-+ QCA956X_EXT_INT_USB1 | QCA956X_EXT_INT_USB2;
-+
-+ if (status == 0) {
-+ spurious_interrupt();
-+ return;
-+ }
-+
-+ if (status & QCA956X_EXT_INT_USB1) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP3_IRQ(0));
-+ }
-+
-+ if (status & QCA956X_EXT_INT_USB2) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP3_IRQ(1));
-+ }
-+
-+ if (status & QCA956X_EXT_INT_PCIE_RC2_ALL) {
-+ /* TODO: flush DDR? */
-+ generic_handle_irq(ATH79_IP3_IRQ(2));
-+ }
-+}
-+
-+static void qca956x_enable_timer_cb(void) {
-+ u32 misc;
-+
-+ misc = ath79_reset_rr(AR71XX_RESET_REG_MISC_INT_ENABLE);
-+ misc |= MISC_INT_MIPS_SI_TIMERINT_MASK;
-+ ath79_reset_wr(AR71XX_RESET_REG_MISC_INT_ENABLE, misc);
-+}
-+
-+static void qca956x_irq_init(void)
-+{
-+ int i;
-+
-+ for (i = ATH79_IP2_IRQ_BASE;
-+ i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+
-+ irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch);
-+
-+ for (i = ATH79_IP3_IRQ_BASE;
-+ i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
-+ irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+
-+ irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch);
-+
-+ /* QCA956x timer init workaround has to be applied right before setting
-+ * up the clock. Else, there will be no jiffies */
-+ late_time_init = &qca956x_enable_timer_cb;
-+}
-+
- void __init arch_init_irq(void)
- {
- unsigned irq_wb_chan2 = -1;
-@@ -189,7 +270,9 @@ void __init arch_init_irq(void)
- soc_is_ar933x() ||
- soc_is_ar934x() ||
- soc_is_qca953x() ||
-- soc_is_qca955x())
-+ soc_is_qca955x() ||
-+ soc_is_qca956x() ||
-+ soc_is_tp9343())
- misc_is_ar71xx = false;
- else
- BUG();
-@@ -203,4 +286,6 @@ void __init arch_init_irq(void)
- qca953x_irq_init();
- else if (soc_is_qca955x())
- qca955x_irq_init();
-+ else if (soc_is_qca956x() || soc_is_tp9343())
-+ qca956x_irq_init();
- }
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -68,6 +68,21 @@ static const struct ath79_pci_irq qca955
- },
- };
-
-+static const struct ath79_pci_irq qca956x_pci_irq_map[] = {
-+ {
-+ .bus = 0,
-+ .slot = 0,
-+ .pin = 1,
-+ .irq = ATH79_PCI_IRQ(0),
-+ },
-+ {
-+ .bus = 1,
-+ .slot = 0,
-+ .pin = 1,
-+ .irq = ATH79_PCI_IRQ(1),
-+ },
-+};
-+
- int pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
- {
- int irq = -1;
-@@ -86,6 +101,9 @@ int pcibios_map_irq(const struct pci_dev
- } else if (soc_is_qca955x()) {
- ath79_pci_irq_map = qca955x_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
-+ } else if (soc_is_qca956x()) {
-+ ath79_pci_irq_map = qca956x_pci_irq_map;
-+ ath79_pci_nr_irqs = ARRAY_SIZE(qca956x_pci_irq_map);
- } else {
- pr_crit("pci %s: invalid irq map\n",
- pci_name((struct pci_dev *) dev));
-@@ -303,6 +321,15 @@ int __init ath79_register_pci(void)
- QCA955X_PCI_MEM_SIZE,
- 1,
- ATH79_IP3_IRQ(2));
-+ } else if (soc_is_qca956x()) {
-+ pdev = ath79_register_pci_ar724x(0,
-+ QCA956X_PCI_CFG_BASE1,
-+ QCA956X_PCI_CTRL_BASE1,
-+ QCA956X_PCI_CRP_BASE1,
-+ QCA956X_PCI_MEM_BASE1,
-+ QCA956X_PCI_MEM_SIZE,
-+ 1,
-+ ATH79_IP3_IRQ(2));
- } else {
- /* No PCI support */
- return -ENODEV;
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -176,6 +176,18 @@ static void __init ath79_detect_sys_type
- rev = id & QCA955X_REV_ID_REVISION_MASK;
- break;
-
-+ case REV_ID_MAJOR_QCA956X:
-+ ath79_soc = ATH79_SOC_QCA956X;
-+ chip = "956X";
-+ rev = id & QCA956X_REV_ID_REVISION_MASK;
-+ break;
-+
-+ case REV_ID_MAJOR_TP9343:
-+ ath79_soc = ATH79_SOC_TP9343;
-+ chip = "9343";
-+ rev = id & QCA956X_REV_ID_REVISION_MASK;
-+ break;
-+
- default:
- panic("ath79: unknown SoC, id:0x%08x", id);
- }
-@@ -183,9 +195,12 @@ static void __init ath79_detect_sys_type
- if (ver == 1)
- ath79_soc_rev = rev;
-
-- if (soc_is_qca953x() || soc_is_qca955x())
-+ if (soc_is_qca953x() || soc_is_qca955x() || soc_is_qca956x())
- sprintf(ath79_sys_type, "Qualcomm Atheros QCA%s ver %u rev %u",
- chip, ver, rev);
-+ else if (soc_is_tp9343())
-+ sprintf(ath79_sys_type, "Qualcomm Atheros TP%s rev %u",
-+ chip, rev);
- else
- sprintf(ath79_sys_type, "Atheros AR%s rev %u", chip, rev);
- pr_info("SoC: %s\n", ath79_sys_type);
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -143,6 +143,23 @@
- #define QCA955X_NFC_BASE 0x1b800200
- #define QCA955X_NFC_SIZE 0xb8
-
-+#define QCA956X_PCI_MEM_BASE1 0x12000000
-+#define QCA956X_PCI_MEM_SIZE 0x02000000
-+#define QCA956X_PCI_CFG_BASE1 0x16000000
-+#define QCA956X_PCI_CFG_SIZE 0x1000
-+#define QCA956X_PCI_CRP_BASE1 (AR71XX_APB_BASE + 0x00250000)
-+#define QCA956X_PCI_CRP_SIZE 0x1000
-+#define QCA956X_PCI_CTRL_BASE1 (AR71XX_APB_BASE + 0x00280000)
-+#define QCA956X_PCI_CTRL_SIZE 0x100
-+
-+#define QCA956X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
-+#define QCA956X_WMAC_SIZE 0x20000
-+#define QCA956X_EHCI0_BASE 0x1b000000
-+#define QCA956X_EHCI1_BASE 0x1b400000
-+#define QCA956X_EHCI_SIZE 0x200
-+#define QCA956X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA956X_GMAC_SIZE 0x64
-+
- #define AR9300_OTP_BASE 0x14000
- #define AR9300_OTP_STATUS 0x15f18
- #define AR9300_OTP_STATUS_TYPE 0x7
-@@ -152,6 +169,13 @@
- #define AR9300_OTP_READ_DATA 0x15f1c
-
- /*
-+ * Hidden Registers
-+ */
-+#define QCA956X_DAM_RESET_OFFSET 0xb90001bc
-+#define QCA956X_DAM_RESET_SIZE 0x4
-+#define QCA956X_INLINE_CHKSUM_ENG BIT(27)
-+
-+/*
- * DDR_CTRL block
- */
- #define AR71XX_DDR_REG_PCI_WIN0 0x7c
-@@ -385,6 +409,49 @@
- #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
- #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define QCA956X_PLL_CPU_CONFIG_REG 0x00
-+#define QCA956X_PLL_CPU_CONFIG1_REG 0x04
-+#define QCA956X_PLL_DDR_CONFIG_REG 0x08
-+#define QCA956X_PLL_DDR_CONFIG1_REG 0x0c
-+#define QCA956X_PLL_CLK_CTRL_REG 0x10
-+
-+#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
-+#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT 19
-+#define QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_SHIFT 0
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_L_MASK 0x1f
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT 5
-+#define QCA956X_PLL_CPU_CONFIG1_NFRAC_H_MASK 0x1fff
-+#define QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT 18
-+#define QCA956X_PLL_CPU_CONFIG1_NINT_MASK 0x1ff
-+
-+#define QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT 16
-+#define QCA956X_PLL_DDR_CONFIG_REFDIV_MASK 0x1f
-+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT 23
-+#define QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK 0x7
-+
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_SHIFT 0
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_L_MASK 0x1f
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT 5
-+#define QCA956X_PLL_DDR_CONFIG1_NFRAC_H_MASK 0x1fff
-+#define QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT 18
-+#define QCA956X_PLL_DDR_CONFIG1_NINT_MASK 0x1ff
-+
-+#define QCA956X_PLL_CLK_CTRL_CPU_PLL_BYPASS BIT(2)
-+#define QCA956X_PLL_CLK_CTRL_DDR_PLL_BYPASS BIT(3)
-+#define QCA956X_PLL_CLK_CTRL_AHB_PLL_BYPASS BIT(4)
-+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT 5
-+#define QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK 0x1f
-+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_SHIFT 10
-+#define QCA956X_PLL_CLK_CTRL_DDR_POST_DIV_MASK 0x1f
-+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_SHIFT 15
-+#define QCA956X_PLL_CLK_CTRL_AHB_POST_DIV_MASK 0x1f
-+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_DDRPLL BIT(20)
-+#define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21)
-+#define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-+
- /*
- * USB_CONFIG block
- */
-@@ -432,6 +499,11 @@
- #define QCA955X_RESET_REG_BOOTSTRAP 0xb0
- #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
-
-+#define QCA956X_RESET_REG_RESET_MODULE 0x1c
-+#define QCA956X_RESET_REG_BOOTSTRAP 0xb0
-+#define QCA956X_RESET_REG_EXT_INT_STATUS 0xac
-+
-+#define MISC_INT_MIPS_SI_TIMERINT_MASK BIT(28)
- #define MISC_INT_ETHSW BIT(12)
- #define MISC_INT_TIMER4 BIT(10)
- #define MISC_INT_TIMER3 BIT(9)
-@@ -606,6 +678,8 @@
-
- #define QCA955X_BOOTSTRAP_REF_CLK_40 BIT(4)
-
-+#define QCA956X_BOOTSTRAP_REF_CLK_40 BIT(2)
-+
- #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
- #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
- #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
-@@ -673,6 +747,37 @@
- QCA955X_EXT_INT_PCIE_RC2_INT1 | QCA955X_EXT_INT_PCIE_RC2_INT2 | \
- QCA955X_EXT_INT_PCIE_RC2_INT3)
-
-+#define QCA956X_EXT_INT_WMAC_MISC BIT(0)
-+#define QCA956X_EXT_INT_WMAC_TX BIT(1)
-+#define QCA956X_EXT_INT_WMAC_RXLP BIT(2)
-+#define QCA956X_EXT_INT_WMAC_RXHP BIT(3)
-+#define QCA956X_EXT_INT_PCIE_RC1 BIT(4)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT0 BIT(5)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT1 BIT(6)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT2 BIT(7)
-+#define QCA956X_EXT_INT_PCIE_RC1_INT3 BIT(8)
-+#define QCA956X_EXT_INT_PCIE_RC2 BIT(12)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT0 BIT(13)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT1 BIT(14)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT2 BIT(15)
-+#define QCA956X_EXT_INT_PCIE_RC2_INT3 BIT(16)
-+#define QCA956X_EXT_INT_USB1 BIT(24)
-+#define QCA956X_EXT_INT_USB2 BIT(28)
-+
-+#define QCA956X_EXT_INT_WMAC_ALL \
-+ (QCA956X_EXT_INT_WMAC_MISC | QCA956X_EXT_INT_WMAC_TX | \
-+ QCA956X_EXT_INT_WMAC_RXLP | QCA956X_EXT_INT_WMAC_RXHP)
-+
-+#define QCA956X_EXT_INT_PCIE_RC1_ALL \
-+ (QCA956X_EXT_INT_PCIE_RC1 | QCA956X_EXT_INT_PCIE_RC1_INT0 | \
-+ QCA956X_EXT_INT_PCIE_RC1_INT1 | QCA956X_EXT_INT_PCIE_RC1_INT2 | \
-+ QCA956X_EXT_INT_PCIE_RC1_INT3)
-+
-+#define QCA956X_EXT_INT_PCIE_RC2_ALL \
-+ (QCA956X_EXT_INT_PCIE_RC2 | QCA956X_EXT_INT_PCIE_RC2_INT0 | \
-+ QCA956X_EXT_INT_PCIE_RC2_INT1 | QCA956X_EXT_INT_PCIE_RC2_INT2 | \
-+ QCA956X_EXT_INT_PCIE_RC2_INT3)
-+
- #define REV_ID_MAJOR_MASK 0xfff0
- #define REV_ID_MAJOR_AR71XX 0x00a0
- #define REV_ID_MAJOR_AR913X 0x00b0
-@@ -688,6 +793,8 @@
- #define REV_ID_MAJOR_QCA9533_V2 0x0160
- #define REV_ID_MAJOR_QCA9556 0x0130
- #define REV_ID_MAJOR_QCA9558 0x1130
-+#define REV_ID_MAJOR_TP9343 0x0150
-+#define REV_ID_MAJOR_QCA956X 0x1150
-
- #define AR71XX_REV_ID_MINOR_MASK 0x3
- #define AR71XX_REV_ID_MINOR_AR7130 0x0
-@@ -712,6 +819,8 @@
-
- #define QCA955X_REV_ID_REVISION_MASK 0xf
-
-+#define QCA956X_REV_ID_REVISION_MASK 0xf
-+
- /*
- * SPI block
- */
-@@ -784,6 +893,19 @@
- #define QCA955X_GPIO_REG_OUT_FUNC5 0x40
- #define QCA955X_GPIO_REG_FUNC 0x6c
-
-+#define QCA956X_GPIO_REG_OUT_FUNC0 0x2c
-+#define QCA956X_GPIO_REG_OUT_FUNC1 0x30
-+#define QCA956X_GPIO_REG_OUT_FUNC2 0x34
-+#define QCA956X_GPIO_REG_OUT_FUNC3 0x38
-+#define QCA956X_GPIO_REG_OUT_FUNC4 0x3c
-+#define QCA956X_GPIO_REG_OUT_FUNC5 0x40
-+#define QCA956X_GPIO_REG_IN_ENABLE0 0x44
-+#define QCA956X_GPIO_REG_IN_ENABLE3 0x50
-+#define QCA956X_GPIO_REG_FUNC 0x6c
-+
-+#define QCA956X_GPIO_OUT_MUX_GE0_MDO 32
-+#define QCA956X_GPIO_OUT_MUX_GE0_MDC 33
-+
- #define AR71XX_GPIO_COUNT 16
- #define AR7240_GPIO_COUNT 18
- #define AR7241_GPIO_COUNT 20
-@@ -792,6 +914,7 @@
- #define AR934X_GPIO_COUNT 23
- #define QCA953X_GPIO_COUNT 18
- #define QCA955X_GPIO_COUNT 24
-+#define QCA956X_GPIO_COUNT 23
-
- /*
- * SRIF block
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -35,6 +35,8 @@ enum ath79_soc_type {
- ATH79_SOC_QCA9533,
- ATH79_SOC_QCA9556,
- ATH79_SOC_QCA9558,
-+ ATH79_SOC_TP9343,
-+ ATH79_SOC_QCA956X,
- };
-
- extern enum ath79_soc_type ath79_soc;
-@@ -126,6 +128,26 @@ static inline int soc_is_qca955x(void)
- return soc_is_qca9556() || soc_is_qca9558();
- }
-
-+static inline int soc_is_tp9343(void)
-+{
-+ return ath79_soc == ATH79_SOC_TP9343;
-+}
-+
-+static inline int soc_is_qca9561(void)
-+{
-+ return ath79_soc == ATH79_SOC_QCA956X;
-+}
-+
-+static inline int soc_is_qca9563(void)
-+{
-+ return ath79_soc == ATH79_SOC_QCA956X;
-+}
-+
-+static inline int soc_is_qca956x(void)
-+{
-+ return soc_is_qca9561() || soc_is_qca9563();
-+}
-+
- void ath79_ddr_wb_flush(unsigned int reg);
- void ath79_ddr_set_pci_windows(void);
-
diff --git a/target/linux/ar71xx/patches-4.14/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.14/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch
deleted file mode 100644
index cab2f6f9cb..0000000000
--- a/target/linux/ar71xx/patches-4.14/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch
+++ /dev/null
@@ -1,38 +0,0 @@
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -157,6 +157,10 @@
- #define QCA956X_EHCI0_BASE 0x1b000000
- #define QCA956X_EHCI1_BASE 0x1b400000
- #define QCA956X_EHCI_SIZE 0x200
-+#define QCA956X_GMAC_SGMII_BASE (AR71XX_APB_BASE + 0x00070000)
-+#define QCA956X_GMAC_SGMII_SIZE 0x64
-+#define QCA956X_PLL_BASE (AR71XX_APB_BASE + 0x00050000)
-+#define QCA956X_PLL_SIZE 0x50
- #define QCA956X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
- #define QCA956X_GMAC_SIZE 0x64
-
-@@ -414,6 +418,7 @@
- #define QCA956X_PLL_DDR_CONFIG_REG 0x08
- #define QCA956X_PLL_DDR_CONFIG1_REG 0x0c
- #define QCA956X_PLL_CLK_CTRL_REG 0x10
-+#define QCA956X_PLL_ETH_XMII_CONTROL_REG 0x30
-
- #define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
- #define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-@@ -1196,4 +1201,16 @@
- #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
- #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
-
-+/*
-+ * QCA956X GMAC Interface
-+ */
-+
-+#define QCA956X_GMAC_REG_ETH_CFG 0x00
-+
-+#define QCA956X_ETH_CFG_SW_ONLY_MODE BIT(7)
-+#define QCA956X_ETH_CFG_SW_PHY_SWAP BIT(8)
-+#define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(9)
-+#define QCA956X_ETH_CFG_SW_APB_ACCESS BIT(10)
-+#define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-+
- #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/patches-4.14/630-MIPS-ath79-fix-chained-irq-disable.patch b/target/linux/ar71xx/patches-4.14/630-MIPS-ath79-fix-chained-irq-disable.patch
deleted file mode 100644
index a74eb4f43e..0000000000
--- a/target/linux/ar71xx/patches-4.14/630-MIPS-ath79-fix-chained-irq-disable.patch
+++ /dev/null
@@ -1,106 +0,0 @@
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -27,6 +27,9 @@
- #include "machtypes.h"
-
-
-+static struct irq_chip ip2_chip;
-+static struct irq_chip ip3_chip;
-+
- static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
- {
- u32 status;
-@@ -56,8 +59,7 @@ static void ar934x_ip2_irq_init(void)
-
- for (i = ATH79_IP2_IRQ_BASE;
- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip,
-- handle_level_irq);
-+ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
- }
-@@ -85,7 +87,7 @@ static void qca953x_irq_init(void)
-
- for (i = ATH79_IP2_IRQ_BASE;
- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca953x_ip2_irq_dispatch);
- }
-@@ -149,15 +151,13 @@ static void qca955x_irq_init(void)
-
- for (i = ATH79_IP2_IRQ_BASE;
- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip,
-- handle_level_irq);
-+ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch);
-
- for (i = ATH79_IP3_IRQ_BASE;
- i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip,
-- handle_level_irq);
-+ irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
- }
-@@ -228,13 +228,13 @@ static void qca956x_irq_init(void)
-
- for (i = ATH79_IP2_IRQ_BASE;
- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+ irq_set_chip_and_handler(i, &ip2_chip, handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca956x_ip2_irq_dispatch);
-
- for (i = ATH79_IP3_IRQ_BASE;
- i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip, handle_level_irq);
-+ irq_set_chip_and_handler(i, &ip3_chip, handle_level_irq);
-
- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca956x_ip3_irq_dispatch);
-
-@@ -243,12 +243,40 @@ static void qca956x_irq_init(void)
- late_time_init = &qca956x_enable_timer_cb;
- }
-
-+static void ath79_ip2_disable(struct irq_data *data)
-+{
-+ disable_irq(ATH79_CPU_IRQ(2));
-+}
-+
-+static void ath79_ip2_enable(struct irq_data *data)
-+{
-+ enable_irq(ATH79_CPU_IRQ(2));
-+}
-+
-+static void ath79_ip3_disable(struct irq_data *data)
-+{
-+ disable_irq(ATH79_CPU_IRQ(3));
-+}
-+
-+static void ath79_ip3_enable(struct irq_data *data)
-+{
-+ enable_irq(ATH79_CPU_IRQ(3));
-+}
-+
- void __init arch_init_irq(void)
- {
- unsigned irq_wb_chan2 = -1;
- unsigned irq_wb_chan3 = -1;
- bool misc_is_ar71xx;
-
-+ ip2_chip = dummy_irq_chip;
-+ ip2_chip.irq_disable = ath79_ip2_disable;
-+ ip2_chip.irq_enable = ath79_ip2_enable;
-+
-+ ip3_chip = dummy_irq_chip;
-+ ip3_chip.irq_disable = ath79_ip3_disable;
-+ ip3_chip.irq_enable = ath79_ip3_enable;
-+
- if (mips_machtype == ATH79_MACH_GENERIC_OF) {
- irqchip_init();
- return;
diff --git a/target/linux/ar71xx/patches-4.14/631-MIPS-ath79-wmac-enable-set-led-pin.patch b/target/linux/ar71xx/patches-4.14/631-MIPS-ath79-wmac-enable-set-led-pin.patch
deleted file mode 100644
index a312217711..0000000000
--- a/target/linux/ar71xx/patches-4.14/631-MIPS-ath79-wmac-enable-set-led-pin.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -406,6 +406,11 @@ void __init ath79_wmac_set_ext_lna_gpio(
- ar934x_set_ext_lna_gpio(chain, gpio);
- }
-
-+void __init ath79_wmac_set_led_pin(int gpio)
-+{
-+ ath79_wmac_data.led_pin = gpio;
-+}
-+
- void __init ath79_register_wmac(u8 *cal_data, u8 *mac_addr)
- {
- if (soc_is_ar913x())
---- a/arch/mips/ath79/dev-wmac.h
-+++ b/arch/mips/ath79/dev-wmac.h
-@@ -18,6 +18,7 @@ void ath79_wmac_disable_2ghz(void);
- void ath79_wmac_disable_5ghz(void);
- void ath79_wmac_set_tx_gain_buffalo(void);
- void ath79_wmac_set_ext_lna_gpio(unsigned chain, int gpio);
-+void ath79_wmac_set_led_pin(int gpio);
-
- bool ar93xx_wmac_read_mac_address(u8 *dest);
-
diff --git a/target/linux/ar71xx/patches-4.14/632-MIPS-ath79-gpio-enable-set-direction.patch b/target/linux/ar71xx/patches-4.14/632-MIPS-ath79-gpio-enable-set-direction.patch
deleted file mode 100644
index 4cf36325e1..0000000000
--- a/target/linux/ar71xx/patches-4.14/632-MIPS-ath79-gpio-enable-set-direction.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -28,6 +28,7 @@ void ath79_gpio_function_enable(u32 mask
- void ath79_gpio_function_disable(u32 mask);
- void ath79_gpio_function_setup(u32 set, u32 clear);
- void ath79_gpio_output_select(unsigned gpio, u8 val);
-+int ath79_gpio_direction_select(unsigned gpio, bool oe);
- void ath79_gpio_init(void);
-
- #endif /* __ATH79_COMMON_H */
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -83,3 +83,19 @@ void __init ath79_gpio_output_select(uns
- /* flush write */
- (void) __raw_readl(base + reg);
- }
-+
-+int ath79_gpio_direction_select(unsigned gpio, bool oe)
-+{
-+ void __iomem *base = ath79_gpio_base;
-+ bool ieq_1 = (soc_is_ar934x() ||
-+ soc_is_qca953x());
-+
-+ if ((ieq_1 && oe) || (!ieq_1 && !oe))
-+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << gpio),
-+ base + AR71XX_GPIO_REG_OE);
-+ else
-+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << gpio),
-+ base + AR71XX_GPIO_REG_OE);
-+
-+ return 0;
-+}
diff --git a/target/linux/ar71xx/patches-4.14/640-MIPS-ath79-add-QCA955x-wmac-reset.patch b/target/linux/ar71xx/patches-4.14/640-MIPS-ath79-add-QCA955x-wmac-reset.patch
deleted file mode 100644
index bb315a1e65..0000000000
--- a/target/linux/ar71xx/patches-4.14/640-MIPS-ath79-add-QCA955x-wmac-reset.patch
+++ /dev/null
@@ -1,82 +0,0 @@
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -38,7 +38,7 @@ unsigned int ath79_soc_rev;
- void __iomem *ath79_pll_base;
- void __iomem *ath79_reset_base;
- EXPORT_SYMBOL_GPL(ath79_reset_base);
--static void __iomem *ath79_ddr_base;
-+void __iomem *ath79_ddr_base;
- static void __iomem *ath79_ddr_wb_flush_base;
- static void __iomem *ath79_ddr_pci_win_base;
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -32,7 +32,7 @@
- #define AR71XX_SPI_SIZE 0x01000000
-
- #define AR71XX_DDR_CTRL_BASE (AR71XX_APB_BASE + 0x00000000)
--#define AR71XX_DDR_CTRL_SIZE 0x100
-+#define AR71XX_DDR_CTRL_SIZE 0x200
- #define AR71XX_UART_BASE (AR71XX_APB_BASE + 0x00020000)
- #define AR71XX_UART_SIZE 0x100
- #define AR71XX_USB_CTRL_BASE (AR71XX_APB_BASE + 0x00030000)
-@@ -229,6 +229,9 @@
- #define QCA953X_DDR_REG_FLUSH_PCIE 0xa8
- #define QCA953X_DDR_REG_FLUSH_WMAC 0xac
-
-+#define QCA955X_DDR_CTL_CONFIG 0x108
-+#define QCA955X_DDR_CTL_CONFIG_ACT_WMAC BIT(23)
-+
- /*
- * PLL block
- */
---- a/arch/mips/ath79/dev-wmac.c
-+++ b/arch/mips/ath79/dev-wmac.c
-@@ -165,6 +165,27 @@ static void qca953x_wmac_setup(void)
- ath79_wmac_data.get_mac_revision = ar93xx_get_soc_revision;
- }
-
-+static int ar955x_wmac_reset(void)
-+{
-+ int i;
-+
-+ /* Try to wait for WMAC DDR activity to stop */
-+ for (i = 0; i < 10; i++) {
-+ if (!(__raw_readl(ath79_ddr_base + QCA955X_DDR_CTL_CONFIG) &
-+ QCA955X_DDR_CTL_CONFIG_ACT_WMAC))
-+ break;
-+
-+ udelay(10);
-+ }
-+
-+ ath79_device_reset_set(QCA955X_RESET_RTC);
-+ udelay(10);
-+ ath79_device_reset_clear(QCA955X_RESET_RTC);
-+ udelay(10);
-+
-+ return 0;
-+}
-+
- static void qca955x_wmac_setup(void)
- {
- u32 t;
-@@ -181,6 +202,8 @@ static void qca955x_wmac_setup(void)
- ath79_wmac_data.is_clk_25mhz = false;
- else
- ath79_wmac_data.is_clk_25mhz = true;
-+
-+ ath79_wmac_data.external_reset = ar955x_wmac_reset;
- }
-
- #define AR93XX_WMAC_SIZE \
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -19,6 +19,8 @@
- #define ATH79_MEM_SIZE_MIN (2 * 1024 * 1024)
- #define ATH79_MEM_SIZE_MAX (256 * 1024 * 1024)
-
-+extern void __iomem *ath79_ddr_base;
-+
- void ath79_clocks_init(void);
- unsigned long ath79_get_sys_clk_rate(const char *id);
-
diff --git a/target/linux/ar71xx/patches-4.14/700-MIPS-ath79-add-openwrt-Kconfig.patch b/target/linux/ar71xx/patches-4.14/700-MIPS-ath79-add-openwrt-Kconfig.patch
deleted file mode 100644
index 093def8d11..0000000000
--- a/target/linux/ar71xx/patches-4.14/700-MIPS-ath79-add-openwrt-Kconfig.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -83,6 +83,8 @@ config ATH79_MACH_UBNT_XM
- Say 'Y' here if you want your kernel to support the
- Ubiquiti Networks XM (rev 1.0) board.
-
-+source "arch/mips/ath79/Kconfig.openwrt"
-+
- endmenu
-
- config SOC_AR71XX
diff --git a/target/linux/ar71xx/patches-4.14/701-MIPS-ath79-add-routerboard-detection.patch b/target/linux/ar71xx/patches-4.14/701-MIPS-ath79-add-routerboard-detection.patch
deleted file mode 100644
index ae9e7772b5..0000000000
--- a/target/linux/ar71xx/patches-4.14/701-MIPS-ath79-add-routerboard-detection.patch
+++ /dev/null
@@ -1,35 +0,0 @@
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -136,6 +136,32 @@ void __init prom_init(void)
- initrd_end = initrd_start + fw_getenvl("initrd_size");
- }
- #endif
-+
-+ if (strstr(arcs_cmdline, "board=750Gr3") ||
-+ strstr(arcs_cmdline, "board=750i") ||
-+ strstr(arcs_cmdline, "board=750-hb") ||
-+ strstr(arcs_cmdline, "board=411") ||
-+ strstr(arcs_cmdline, "board=433") ||
-+ strstr(arcs_cmdline, "board=435") ||
-+ strstr(arcs_cmdline, "board=450") ||
-+ strstr(arcs_cmdline, "board=493") ||
-+ strstr(arcs_cmdline, "board=951G") ||
-+ strstr(arcs_cmdline, "board=H951L") ||
-+ strstr(arcs_cmdline, "board=952-hb") ||
-+ strstr(arcs_cmdline, "board=953gs") ||
-+ strstr(arcs_cmdline, "board=962") ||
-+ strstr(arcs_cmdline, "board=lhg") ||
-+ strstr(arcs_cmdline, "board=map-hb") ||
-+ strstr(arcs_cmdline, "board=map2-hb") ||
-+ strstr(arcs_cmdline, "board=wap-hb") ||
-+ strstr(arcs_cmdline, "board=wap-lte") ||
-+ strstr(arcs_cmdline, "board=wapg-sc") ||
-+ strstr(arcs_cmdline, "board=2011L") ||
-+ strstr(arcs_cmdline, "board=2011r") ||
-+ strstr(arcs_cmdline, "board=711Gr100") ||
-+ strstr(arcs_cmdline, "board=911L") ||
-+ strstr(arcs_cmdline, "board=922gs"))
-+ ath79_prom_append_cmdline("console", "ttyS0,115200");
- }
-
- void __init prom_free_prom_memory(void)
diff --git a/target/linux/ar71xx/patches-4.14/702-MIPS-ath79-fixup-routerboot-board-parameter.patch b/target/linux/ar71xx/patches-4.14/702-MIPS-ath79-fixup-routerboot-board-parameter.patch
deleted file mode 100644
index b8715bba9e..0000000000
--- a/target/linux/ar71xx/patches-4.14/702-MIPS-ath79-fixup-routerboot-board-parameter.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From: Gabor Juhos <juhosg@freemail.hu>
-Date: Sat, 2 Dec 2017 19:15:29 +0100
-Subject: [PATCH] MIPS: ath79: fix board detection with newer RouterBOOT versions
-
-Recent RouterBOOT version (at least version 3.41 on RB911G-5HPacD)
-use "Board=" kernel parameter instead of "board=" to pass the board
-name to the kernel. Due to this change the board detection code is
-not working on the devices shipped with the new RouterBOOT version.
-Because the kernel is unable to identify these boards they become
-unusable despite that they are supported by the current code.
-
-Update the prom_init code to convert the 'Board' kernel parameter to
-'board'. After this change, the board detection works also with the
-new RouterBOOT versions.
-
-Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
----
---- a/arch/mips/ath79/prom.c
-+++ b/arch/mips/ath79/prom.c
-@@ -104,6 +104,7 @@ static int __init ath79_prom_init_myload
- void __init prom_init(void)
- {
- const char *env;
-+ char *c;
-
- if (ath79_prom_init_myloader())
- return;
-@@ -137,6 +138,15 @@ void __init prom_init(void)
- }
- #endif
-
-+ /*
-+ * RouterBOOT uses "Board" kernel parameter instead of "board" since
-+ * version 3.41 (or so). Replace the first character of the parameter
-+ * to keep board detection working.
-+ */
-+ c = strstr(arcs_cmdline, "Board=");
-+ if (c)
-+ c[0] = 'b';
-+
- if (strstr(arcs_cmdline, "board=750Gr3") ||
- strstr(arcs_cmdline, "board=750i") ||
- strstr(arcs_cmdline, "board=750-hb") ||
diff --git a/target/linux/ar71xx/patches-4.14/739-MIPS-ath79-add-gpio-func-register-for-QCA955x-SoC.patch b/target/linux/ar71xx/patches-4.14/739-MIPS-ath79-add-gpio-func-register-for-QCA955x-SoC.patch
deleted file mode 100644
index a65f7d993f..0000000000
--- a/target/linux/ar71xx/patches-4.14/739-MIPS-ath79-add-gpio-func-register-for-QCA955x-SoC.patch
+++ /dev/null
@@ -1,38 +0,0 @@
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -33,6 +33,7 @@ static void __iomem *ath79_gpio_get_func
- reg = AR71XX_GPIO_REG_FUNC;
- else if (soc_is_ar934x() ||
- soc_is_qca953x() ||
-+ soc_is_qca955x() ||
- soc_is_qca956x() ||
- soc_is_tp9343())
- reg = AR934X_GPIO_REG_FUNC;
-@@ -64,15 +65,21 @@ void ath79_gpio_function_disable(u32 mas
- void __init ath79_gpio_output_select(unsigned gpio, u8 val)
- {
- void __iomem *base = ath79_gpio_base;
-- unsigned int reg;
-+ unsigned int reg, reg_base;
- u32 t, s;
-
-- BUG_ON(!soc_is_ar934x() && !soc_is_qca953x() && !soc_is_qca956x());
--
-- if (gpio >= AR934X_GPIO_COUNT)
-- return;
-+ if (soc_is_ar934x())
-+ reg_base = AR934X_GPIO_REG_OUT_FUNC0;
-+ else if (soc_is_qca953x())
-+ reg_base = QCA953X_GPIO_REG_OUT_FUNC0;
-+ else if (soc_is_qca955x())
-+ reg_base = QCA955X_GPIO_REG_OUT_FUNC0;
-+ else if (soc_is_qca956x())
-+ reg_base = QCA956X_GPIO_REG_OUT_FUNC0;
-+ else
-+ BUG();
-
-- reg = AR934X_GPIO_REG_OUT_FUNC0 + 4 * (gpio / 4);
-+ reg = reg_base + 4 * (gpio / 4);
- s = 8 * (gpio % 4);
-
- t = __raw_readl(base + reg);
diff --git a/target/linux/ar71xx/patches-4.14/740-MIPS-ath79-add-PCI-for-QCA953x-SoC.patch b/target/linux/ar71xx/patches-4.14/740-MIPS-ath79-add-PCI-for-QCA953x-SoC.patch
deleted file mode 100644
index 659f74451c..0000000000
--- a/target/linux/ar71xx/patches-4.14/740-MIPS-ath79-add-PCI-for-QCA953x-SoC.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -53,6 +53,15 @@ static const struct ath79_pci_irq ar724x
- }
- };
-
-+static const struct ath79_pci_irq qca953x_pci_irq_map[] = {
-+ {
-+ .bus = 0,
-+ .slot = 0,
-+ .pin = 1,
-+ .irq = ATH79_PCI_IRQ(0),
-+ },
-+};
-+
- static const struct ath79_pci_irq qca955x_pci_irq_map[] = {
- {
- .bus = 0,
-@@ -98,6 +107,9 @@ int pcibios_map_irq(const struct pci_dev
- soc_is_ar9344()) {
- ath79_pci_irq_map = ar724x_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
-+ } else if (soc_is_qca953x()) {
-+ ath79_pci_irq_map = qca953x_pci_irq_map;
-+ ath79_pci_nr_irqs = ARRAY_SIZE(qca953x_pci_irq_map);
- } else if (soc_is_qca955x()) {
- ath79_pci_irq_map = qca955x_pci_irq_map;
- ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
-@@ -303,6 +315,15 @@ int __init ath79_register_pci(void)
- AR724X_PCI_MEM_SIZE,
- 0,
- ATH79_IP2_IRQ(0));
-+ } else if (soc_is_qca9533()) {
-+ pdev = ath79_register_pci_ar724x(0,
-+ QCA953X_PCI_CFG_BASE0,
-+ QCA953X_PCI_CTRL_BASE0,
-+ QCA953X_PCI_CRP_BASE0,
-+ QCA953X_PCI_MEM_BASE0,
-+ QCA953X_PCI_MEM_SIZE,
-+ 0,
-+ ATH79_IP2_IRQ(0));
- } else if (soc_is_qca9558()) {
- pdev = ath79_register_pci_ar724x(0,
- QCA955X_PCI_CFG_BASE0,
diff --git a/target/linux/ar71xx/patches-4.14/741-MIPS-ath79-add-PCI-for-QCA9556-SoC.patch b/target/linux/ar71xx/patches-4.14/741-MIPS-ath79-add-PCI-for-QCA9556-SoC.patch
deleted file mode 100644
index 5ca0784253..0000000000
--- a/target/linux/ar71xx/patches-4.14/741-MIPS-ath79-add-PCI-for-QCA9556-SoC.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/mips/ath79/pci.c
-+++ b/arch/mips/ath79/pci.c
-@@ -324,7 +324,8 @@ int __init ath79_register_pci(void)
- QCA953X_PCI_MEM_SIZE,
- 0,
- ATH79_IP2_IRQ(0));
-- } else if (soc_is_qca9558()) {
-+ } else if (soc_is_qca9558() ||
-+ soc_is_qca9556()) {
- pdev = ath79_register_pci_ar724x(0,
- QCA955X_PCI_CFG_BASE0,
- QCA955X_PCI_CTRL_BASE0,
diff --git a/target/linux/ar71xx/patches-4.14/818-MIPS-ath79-add-nu801-led-driver.patch b/target/linux/ar71xx/patches-4.14/818-MIPS-ath79-add-nu801-led-driver.patch
deleted file mode 100644
index 349c43d9fb..0000000000
--- a/target/linux/ar71xx/patches-4.14/818-MIPS-ath79-add-nu801-led-driver.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -632,6 +632,13 @@ config LEDS_IS31FL32XX
-
- comment "LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)"
-
-+config LEDS_NU801
-+ tristate "LED driver for NU801 RGB LED"
-+ depends on LEDS_CLASS && (ATH79_MACH_MR18 || ATH79_MACH_Z1)
-+ help
-+ This option enables support for NU801 RGB LED driver chips
-+ accessed via GPIO.
-+
- config LEDS_BLINKM
- tristate "LED support for the BlinkM I2C RGB LED"
- depends on LEDS_CLASS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -58,6 +58,7 @@ obj-$(CONFIG_LEDS_LT3593) += leds-lt359
- obj-$(CONFIG_LEDS_ADP5520) += leds-adp5520.o
- obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
- obj-$(CONFIG_LEDS_RB750) += leds-rb750.o
-+obj-$(CONFIG_LEDS_NU801) += leds-nu801.o
- obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
- obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
- obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
diff --git a/target/linux/ar71xx/patches-4.14/820-MIPS-ath79-add_gpio_function2_setup.patch b/target/linux/ar71xx/patches-4.14/820-MIPS-ath79-add_gpio_function2_setup.patch
deleted file mode 100644
index afa7b69b43..0000000000
--- a/target/linux/ar71xx/patches-4.14/820-MIPS-ath79-add_gpio_function2_setup.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-Add access to the function2 gpio register. This probably has to be
-converted into a pimux driver later on. This is needed for some setup
-functions on the Arduino Yun.
-
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -29,6 +29,7 @@ void ath79_ddr_ctrl_init(void);
- void ath79_gpio_function_enable(u32 mask);
- void ath79_gpio_function_disable(u32 mask);
- void ath79_gpio_function_setup(u32 set, u32 clear);
-+void ath79_gpio_function2_setup(u32 set, u32 clear);
- void ath79_gpio_output_select(unsigned gpio, u8 val);
- int ath79_gpio_direction_select(unsigned gpio, bool oe);
- void ath79_gpio_init(void);
---- a/arch/mips/ath79/gpio.c
-+++ b/arch/mips/ath79/gpio.c
-@@ -43,6 +43,31 @@ static void __iomem *ath79_gpio_get_func
- return ath79_gpio_base + reg;
- }
-
-+static void __iomem *ath79_gpio_get_function2_reg(void)
-+{
-+ u32 reg = 0;
-+
-+ if (soc_is_ar71xx() ||
-+ soc_is_ar724x() ||
-+ soc_is_ar913x() ||
-+ soc_is_ar933x())
-+ reg = AR71XX_GPIO_REG_FUNC_2;
-+ else
-+ BUG();
-+
-+ return ath79_gpio_base + reg;
-+}
-+
-+
-+void ath79_gpio_function2_setup(u32 set, u32 clear)
-+{
-+ void __iomem *reg = ath79_gpio_get_function2_reg();
-+
-+ __raw_writel((__raw_readl(reg) & ~clear) | set, reg);
-+ /* flush write */
-+ __raw_readl(reg);
-+}
-+
- void ath79_gpio_function_setup(u32 set, u32 clear)
- {
- void __iomem *reg = ath79_gpio_get_function_reg();
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -865,6 +865,7 @@
- #define AR71XX_GPIO_REG_INT_PENDING 0x20
- #define AR71XX_GPIO_REG_INT_ENABLE 0x24
- #define AR71XX_GPIO_REG_FUNC 0x28
-+#define AR71XX_GPIO_REG_FUNC_2 0x30
-
- #define AR934X_GPIO_REG_OUT_FUNC0 0x2c
- #define AR934X_GPIO_REG_OUT_FUNC1 0x30
-@@ -989,6 +990,8 @@
- #define AR724X_GPIO_FUNC_UART_EN BIT(1)
- #define AR724X_GPIO_FUNC_JTAG_DISABLE BIT(0)
-
-+#define AR933X_GPIO_FUNC2_JUMPSTART_DISABLE BIT(9)
-+
- #define AR913X_GPIO_FUNC_WMAC_LED_EN BIT(22)
- #define AR913X_GPIO_FUNC_EXP_PORT_CS_EN BIT(21)
- #define AR913X_GPIO_FUNC_I2S_REFCLKEN BIT(20)
diff --git a/target/linux/ar71xx/patches-4.14/821-serial-core-add-support-for-boot-console-with-arbitr.patch b/target/linux/ar71xx/patches-4.14/821-serial-core-add-support-for-boot-console-with-arbitr.patch
deleted file mode 100644
index 23b6d73959..0000000000
--- a/target/linux/ar71xx/patches-4.14/821-serial-core-add-support-for-boot-console-with-arbitr.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 4d3c17975c7814884a721fe693b3adf5c426d759 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 10 Nov 2015 22:18:39 +0100
-Subject: [RFC] serial: core: add support for boot console with arbitrary
- baud rates
-
-The Arduino Yun uses a baud rate of 250000 by default. The serial is
-going over the Atmel ATmega and is used to connect to this chip.
-Without this patch Linux wants to switch the console to 9600 Baud.
-
-With this patch Linux will use the configured baud rate and not a
-default one specified in uart_register_driver().
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-[rebased to 4.14, slightly reworded commit message]
-Signed-off-by: Sungbo Eo <mans0n@gorani.run>
----
- drivers/tty/serial/serial_core.c | 6 +++++-
- include/linux/console.h | 1 +
- 2 files changed, 6 insertions(+), 1 deletions(-)
-
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -232,6 +232,8 @@ static int uart_port_startup(struct tty_
- if (retval == 0) {
- if (uart_console(uport) && uport->cons->cflag) {
- tty->termios.c_cflag = uport->cons->cflag;
-+ tty->termios.c_ospeed = uport->cons->baud;
-+ tty->termios.c_ispeed = uport->cons->baud;
- uport->cons->cflag = 0;
- }
- /*
-@@ -2072,8 +2074,10 @@ uart_set_options(struct uart_port *port,
- * Allow the setting of the UART parameters with a NULL console
- * too:
- */
-- if (co)
-+ if (co) {
- co->cflag = termios.c_cflag;
-+ co->baud = baud;
-+ }
-
- return 0;
- }
---- a/include/linux/console.h
-+++ b/include/linux/console.h
-@@ -145,6 +145,7 @@ struct console {
- short flags;
- short index;
- int cflag;
-+ int baud;
- void *data;
- struct console *next;
- };
diff --git a/target/linux/ar71xx/patches-4.14/900-mdio_bitbang_ignore_ta_value.patch b/target/linux/ar71xx/patches-4.14/900-mdio_bitbang_ignore_ta_value.patch
deleted file mode 100644
index 8f8f349a66..0000000000
--- a/target/linux/ar71xx/patches-4.14/900-mdio_bitbang_ignore_ta_value.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb
- static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
-- int ret, i;
-+ int ret;
-
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
-@@ -165,19 +165,7 @@ static int mdiobb_read(struct mii_bus *b
-
- ctrl->ops->set_mdio_dir(ctrl, 0);
-
-- /* check the turnaround bit: the PHY should be driving it to zero, if this
-- * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that
-- */
-- if (mdiobb_get_bit(ctrl) != 0 &&
-- !(bus->phy_ignore_ta_mask & (1 << phy))) {
-- /* PHY didn't drive TA low -- flush any bits it
-- * may be trying to send.
-- */
-- for (i = 0; i < 32; i++)
-- mdiobb_get_bit(ctrl);
--
-- return 0xffff;
-- }
-+ mdiobb_get_bit(ctrl);
-
- ret = mdiobb_get_num(ctrl, 16);
- mdiobb_get_bit(ctrl);
diff --git a/target/linux/ar71xx/patches-4.14/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch b/target/linux/ar71xx/patches-4.14/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
deleted file mode 100644
index a830346a31..0000000000
--- a/target/linux/ar71xx/patches-4.14/901-phy-mdio-bitbang-prevent-rescheduling-during-command.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 16 Jun 2015 13:15:08 +0200
-Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command
-
-It seems some phys have some maximum timings for accessing the MDIO line,
-resulting in bit errors under cpu stress. Prevent this from happening by
-disabling interrupts when sending commands.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/net/phy/mdio-bitbang.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -17,6 +17,7 @@
- * kind, whether express or implied.
- */
-
-+#include <linux/irqflags.h>
- #include <linux/module.h>
- #include <linux/mdio-bitbang.h>
- #include <linux/types.h>
-@@ -156,7 +157,9 @@ static int mdiobb_read(struct mii_bus *b
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
- int ret;
-+ unsigned long flags;
-
-+ local_irq_save(flags);
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
- mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
-@@ -169,13 +172,17 @@ static int mdiobb_read(struct mii_bus *b
-
- ret = mdiobb_get_num(ctrl, 16);
- mdiobb_get_bit(ctrl);
-+ local_irq_restore(flags);
-+
- return ret;
- }
-
- static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
-+ unsigned long flags;
-
-+ local_irq_save(flags);
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
- mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
-@@ -190,6 +197,8 @@ static int mdiobb_write(struct mii_bus *
-
- ctrl->ops->set_mdio_dir(ctrl, 0);
- mdiobb_get_bit(ctrl);
-+ local_irq_restore(flags);
-+
- return 0;
- }
-
diff --git a/target/linux/ar71xx/patches-4.14/902-at803x-add-reset-gpio-pdata.patch b/target/linux/ar71xx/patches-4.14/902-at803x-add-reset-gpio-pdata.patch
deleted file mode 100644
index e4e51963bb..0000000000
--- a/target/linux/ar71xx/patches-4.14/902-at803x-add-reset-gpio-pdata.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-Add support for configuring AT803x GPIO reset via platform data.
-This is necessary, because ath79 is not converted to device tree yet.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/include/linux/platform_data/phy-at803x.h
-+++ b/include/linux/platform_data/phy-at803x.h
-@@ -6,6 +6,8 @@ struct at803x_platform_data {
- int enable_rgmii_tx_delay:1;
- int enable_rgmii_rx_delay:1;
- int fixup_rgmii_tx_delay:1;
-+ int has_reset_gpio:1;
-+ int reset_gpio;
- };
-
- #endif /* _PHY_AT803X_PDATA_H */
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -259,6 +259,7 @@ static int at803x_resume(struct phy_devi
-
- static int at803x_probe(struct phy_device *phydev)
- {
-+ struct at803x_platform_data *pdata;
- struct device *dev = &phydev->mdio.dev;
- struct at803x_priv *priv;
- struct gpio_desc *gpiod_reset;
-@@ -271,6 +272,12 @@ static int at803x_probe(struct phy_devic
- phydev->drv->phy_id != ATH8032_PHY_ID)
- goto does_not_require_reset_workaround;
-
-+ pdata = dev_get_platdata(dev);
-+ if (pdata && pdata->has_reset_gpio) {
-+ devm_gpio_request(dev, pdata->reset_gpio, "reset");
-+ gpio_direction_output(pdata->reset_gpio, 1);
-+ }
-+
- gpiod_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(gpiod_reset))
- return PTR_ERR(gpiod_reset);
-@@ -402,15 +409,23 @@ static void at803x_link_change_notify(st
- * cannot recover from by software.
- */
- if (phydev->state == PHY_NOLINK) {
-- if (priv->gpiod_reset && !priv->phy_reset) {
-+ if ((priv->gpiod_reset || (pdata && pdata->has_reset_gpio)) &&
-+ !priv->phy_reset) {
- struct at803x_context context;
-
- at803x_context_save(phydev, &context);
-
-- gpiod_set_value(priv->gpiod_reset, 1);
-- msleep(1);
-- gpiod_set_value(priv->gpiod_reset, 0);
-- msleep(1);
-+ if (pdata && pdata->has_reset_gpio) {
-+ gpio_set_value_cansleep(pdata->reset_gpio, 0);
-+ msleep(1);
-+ gpio_set_value_cansleep(pdata->reset_gpio, 1);
-+ msleep(1);
-+ } else {
-+ gpiod_set_value(priv->gpiod_reset, 1);
-+ msleep(1);
-+ gpiod_set_value(priv->gpiod_reset, 0);
-+ msleep(1);
-+ }
-
- at803x_context_restore(phydev, &context);
-
diff --git a/target/linux/ar71xx/patches-4.14/903-at803x-add-sgmii-aneg-override-pdata.patch b/target/linux/ar71xx/patches-4.14/903-at803x-add-sgmii-aneg-override-pdata.patch
deleted file mode 100644
index 600f8ff6de..0000000000
--- a/target/linux/ar71xx/patches-4.14/903-at803x-add-sgmii-aneg-override-pdata.patch
+++ /dev/null
@@ -1,38 +0,0 @@
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -458,12 +458,15 @@ static void at803x_link_change_notify(st
-
- static int at803x_aneg_done(struct phy_device *phydev)
- {
-+ struct at803x_platform_data *pdata;
- int ccr;
-
- int aneg_done = genphy_aneg_done(phydev);
- if (aneg_done != BMSR_ANEGCOMPLETE)
- return aneg_done;
-
-+ pdata = dev_get_platdata(&phydev->mdio.dev);
-+
- /*
- * in SGMII mode, if copper side autoneg is successful,
- * also check SGMII side autoneg result
-@@ -478,7 +481,8 @@ static int at803x_aneg_done(struct phy_d
- /* check if the SGMII link is OK. */
- if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
- pr_warn("803x_aneg_done: SGMII link is not ok\n");
-- aneg_done = 0;
-+ if (!pdata || !pdata->override_sgmii_aneg)
-+ aneg_done = 0;
- }
- /* switch back to copper page */
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
---- a/include/linux/platform_data/phy-at803x.h
-+++ b/include/linux/platform_data/phy-at803x.h
-@@ -7,6 +7,7 @@ struct at803x_platform_data {
- int enable_rgmii_rx_delay:1;
- int fixup_rgmii_tx_delay:1;
- int has_reset_gpio:1;
-+ int override_sgmii_aneg:1;
- int reset_gpio;
- };
-
diff --git a/target/linux/ar71xx/patches-4.14/910-unaligned_access_hacks.patch b/target/linux/ar71xx/patches-4.14/910-unaligned_access_hacks.patch
deleted file mode 100644
index 6938f96551..0000000000
--- a/target/linux/ar71xx/patches-4.14/910-unaligned_access_hacks.patch
+++ /dev/null
@@ -1,942 +0,0 @@
---- a/arch/mips/include/asm/checksum.h
-+++ b/arch/mips/include/asm/checksum.h
-@@ -134,26 +134,30 @@ static inline __sum16 ip_fast_csum(const
- const unsigned int *stop = word + ihl;
- unsigned int csum;
- int carry;
-+ unsigned int w;
-
-- csum = word[0];
-- csum += word[1];
-- carry = (csum < word[1]);
-+ csum = net_hdr_word(word++);
-+
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[2];
-- carry = (csum < word[2]);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[3];
-- carry = (csum < word[3]);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- word += 4;
- do {
-- csum += *word;
-- carry = (csum < *word);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-- word++;
- } while (word != stop);
-
- return csum_fold(csum);
-@@ -214,73 +218,6 @@ static inline __sum16 ip_compute_csum(co
- return csum_fold(csum_partial(buff, len, 0));
- }
-
--#define _HAVE_ARCH_IPV6_CSUM
--static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-- const struct in6_addr *daddr,
-- __u32 len, __u8 proto,
-- __wsum sum)
--{
-- __wsum tmp;
--
-- __asm__(
-- " .set push # csum_ipv6_magic\n"
-- " .set noreorder \n"
-- " .set noat \n"
-- " addu %0, %5 # proto (long in network byte order)\n"
-- " sltu $1, %0, %5 \n"
-- " addu %0, $1 \n"
--
-- " addu %0, %6 # csum\n"
-- " sltu $1, %0, %6 \n"
-- " lw %1, 0(%2) # four words source address\n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 4(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 8(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 12(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 0(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 4(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 8(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 12(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " addu %0, $1 # Add final carry\n"
-- " .set pop"
-- : "=&r" (sum), "=&r" (tmp)
-- : "r" (saddr), "r" (daddr),
-- "0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
--
-- return csum_fold(sum);
--}
--
- #include <asm-generic/checksum.h>
- #endif /* CONFIG_GENERIC_CSUM */
-
---- a/include/uapi/linux/ip.h
-+++ b/include/uapi/linux/ip.h
-@@ -103,7 +103,7 @@ struct iphdr {
- __be32 saddr;
- __be32 daddr;
- /*The options start here. */
--};
-+} __attribute__((packed, aligned(2)));
-
-
- struct ip_auth_hdr {
---- a/include/uapi/linux/ipv6.h
-+++ b/include/uapi/linux/ipv6.h
-@@ -104,7 +104,7 @@ struct ipv6_destopt_hao {
- __u8 type;
- __u8 length;
- struct in6_addr addr;
--} __attribute__((packed));
-+} __attribute__((packed, aligned(2)));
-
- /*
- * IPv6 fixed header
-@@ -131,7 +131,7 @@ struct ipv6hdr {
-
- struct in6_addr saddr;
- struct in6_addr daddr;
--};
-+} __attribute__((packed, aligned(2)));
-
-
- /* index values for the variables in ipv6_devconf */
---- a/include/uapi/linux/tcp.h
-+++ b/include/uapi/linux/tcp.h
-@@ -55,7 +55,7 @@ struct tcphdr {
- __be16 window;
- __sum16 check;
- __be16 urg_ptr;
--};
-+} __attribute__((packed, aligned(2)));
-
- /*
- * The union cast uses a gcc extension to avoid aliasing problems
-@@ -65,7 +65,7 @@ struct tcphdr {
- union tcp_word_hdr {
- struct tcphdr hdr;
- __be32 words[5];
--};
-+} __attribute__((packed, aligned(2)));
-
- #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3])
-
---- a/include/uapi/linux/udp.h
-+++ b/include/uapi/linux/udp.h
-@@ -25,7 +25,7 @@ struct udphdr {
- __be16 dest;
- __be16 len;
- __sum16 check;
--};
-+} __attribute__((packed, aligned(2)));
-
- /* UDP socket options */
- #define UDP_CORK 1 /* Never send partially complete segments */
---- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
-+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
-@@ -48,8 +48,8 @@ static bool ipv4_pkt_to_tuple(const stru
- if (ap == NULL)
- return false;
-
-- tuple->src.u3.ip = ap[0];
-- tuple->dst.u3.ip = ap[1];
-+ tuple->src.u3.ip = net_hdr_word(ap++);
-+ tuple->dst.u3.ip = net_hdr_word(ap);
-
- return true;
- }
---- a/include/uapi/linux/icmp.h
-+++ b/include/uapi/linux/icmp.h
-@@ -82,7 +82,7 @@ struct icmphdr {
- } frag;
- __u8 reserved[4];
- } un;
--};
-+} __attribute__((packed, aligned(2)));
-
-
- /*
---- a/include/uapi/linux/in6.h
-+++ b/include/uapi/linux/in6.h
-@@ -43,7 +43,7 @@ struct in6_addr {
- #define s6_addr16 in6_u.u6_addr16
- #define s6_addr32 in6_u.u6_addr32
- #endif
--};
-+} __attribute__((packed, aligned(2)));
- #endif /* __UAPI_DEF_IN6_ADDR */
-
- #if __UAPI_DEF_SOCKADDR_IN6
---- a/net/ipv6/tcp_ipv6.c
-+++ b/net/ipv6/tcp_ipv6.c
-@@ -39,6 +39,7 @@
- #include <linux/ipsec.h>
- #include <linux/times.h>
- #include <linux/slab.h>
-+#include <asm/unaligned.h>
- #include <linux/uaccess.h>
- #include <linux/ipv6.h>
- #include <linux/icmpv6.h>
-@@ -819,10 +820,10 @@ static void tcp_v6_send_response(const s
- topt = (__be32 *)(t1 + 1);
-
- if (tsecr) {
-- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
-- *topt++ = htonl(tsval);
-- *topt++ = htonl(tsecr);
-+ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
-+ put_unaligned_be32(tsval, topt++);
-+ put_unaligned_be32(tsecr, topt++);
- }
-
- #ifdef CONFIG_TCP_MD5SIG
---- a/include/linux/ipv6.h
-+++ b/include/linux/ipv6.h
-@@ -6,6 +6,7 @@
-
- #define ipv6_optlen(p) (((p)->hdrlen+1) << 3)
- #define ipv6_authlen(p) (((p)->hdrlen+2) << 2)
-+
- /*
- * This structure contains configuration options per IPv6 link.
- */
---- a/net/ipv6/datagram.c
-+++ b/net/ipv6/datagram.c
-@@ -486,7 +486,7 @@ int ipv6_recv_error(struct sock *sk, str
- ipv6_iface_scope_id(&sin->sin6_addr,
- IP6CB(skb)->iif);
- } else {
-- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
-+ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
- &sin->sin6_addr);
- sin->sin6_scope_id = 0;
- }
-@@ -835,12 +835,12 @@ int ip6_datagram_send_ctl(struct net *ne
- }
-
- if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
-- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
-+ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
- err = -EINVAL;
- goto exit_f;
- }
- }
-- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
-+ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
- break;
-
- case IPV6_2292HOPOPTS:
---- a/net/ipv6/ip6_gre.c
-+++ b/net/ipv6/ip6_gre.c
-@@ -400,7 +400,7 @@ static void ip6gre_err(struct sk_buff *s
- return;
- ipv6h = (const struct ipv6hdr *)skb->data;
- greh = (const struct gre_base_hdr *)(skb->data + offset);
-- key = key_off ? *(__be32 *)(skb->data + key_off) : 0;
-+ key = key_off ? net_hdr_word((__be32 *)(skb->data + key_off)) : 0;
-
- t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr,
- key, greh->protocol);
---- a/net/ipv6/exthdrs.c
-+++ b/net/ipv6/exthdrs.c
-@@ -733,7 +733,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
- goto drop;
- }
-
-- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
-+ pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
- if (pkt_len <= IPV6_MAXPLEN) {
- __IP6_INC_STATS(net, ipv6_skb_idev(skb),
- IPSTATS_MIB_INHDRERRORS);
---- a/include/linux/types.h
-+++ b/include/linux/types.h
-@@ -229,5 +229,11 @@ struct callback_head {
- typedef void (*rcu_callback_t)(struct rcu_head *head);
- typedef void (*call_rcu_func_t)(struct rcu_head *head, rcu_callback_t func);
-
-+struct net_hdr_word {
-+ u32 words[1];
-+} __attribute__((packed, aligned(2)));
-+
-+#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
-+
- #endif /* __ASSEMBLY__ */
- #endif /* _LINUX_TYPES_H */
---- a/net/ipv4/af_inet.c
-+++ b/net/ipv4/af_inet.c
-@@ -1352,8 +1352,8 @@ struct sk_buff **inet_gro_receive(struct
- if (unlikely(ip_fast_csum((u8 *)iph, 5)))
- goto out_unlock;
-
-- id = ntohl(*(__be32 *)&iph->id);
-- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
-+ id = ntohl(net_hdr_word(&iph->id));
-+ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF));
- id >>= 16;
-
- for (p = *head; p; p = p->next) {
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -464,7 +464,7 @@ static struct neighbour *ipv4_neigh_look
- else if (skb)
- pkey = &ip_hdr(skb)->daddr;
-
-- n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey);
-+ n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey));
- if (n)
- return n;
- return neigh_create(&arp_tbl, pkey, dev);
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -454,48 +454,53 @@ static void tcp_options_write(__be32 *pt
- u16 options = opts->options; /* mungable copy */
-
- if (unlikely(OPTION_MD5 & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
- /* overload cookie hash location */
- opts->hash_location = (__u8 *)ptr;
- ptr += 4;
- }
-
- if (unlikely(opts->mss)) {
-- *ptr++ = htonl((TCPOPT_MSS << 24) |
-- (TCPOLEN_MSS << 16) |
-- opts->mss);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
-+ opts->mss);
- }
-
- if (likely(OPTION_TS & options)) {
- if (unlikely(OPTION_SACK_ADVERTISE & options)) {
-- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
-- (TCPOLEN_SACK_PERM << 16) |
-- (TCPOPT_TIMESTAMP << 8) |
-- TCPOLEN_TIMESTAMP);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_SACK_PERM << 24) |
-+ (TCPOLEN_SACK_PERM << 16) |
-+ (TCPOPT_TIMESTAMP << 8) |
-+ TCPOLEN_TIMESTAMP);
- options &= ~OPTION_SACK_ADVERTISE;
- } else {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_TIMESTAMP << 8) |
-- TCPOLEN_TIMESTAMP);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) |
-+ TCPOLEN_TIMESTAMP);
- }
-- *ptr++ = htonl(opts->tsval);
-- *ptr++ = htonl(opts->tsecr);
-+ net_hdr_word(ptr++) = htonl(opts->tsval);
-+ net_hdr_word(ptr++) = htonl(opts->tsecr);
- }
-
- if (unlikely(OPTION_SACK_ADVERTISE & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_SACK_PERM << 8) |
-- TCPOLEN_SACK_PERM);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_SACK_PERM << 8) |
-+ TCPOLEN_SACK_PERM);
- }
-
- if (unlikely(OPTION_WSCALE & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_WINDOW << 16) |
-- (TCPOLEN_WINDOW << 8) |
-- opts->ws);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_WINDOW << 16) |
-+ (TCPOLEN_WINDOW << 8) |
-+ opts->ws);
- }
-
- if (unlikely(opts->num_sack_blocks)) {
-@@ -503,16 +508,17 @@ static void tcp_options_write(__be32 *pt
- tp->duplicate_sack : tp->selective_acks;
- int this_sack;
-
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_SACK << 8) |
-- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_SACK << 8) |
-+ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
- TCPOLEN_SACK_PERBLOCK)));
-
- for (this_sack = 0; this_sack < opts->num_sack_blocks;
- ++this_sack) {
-- *ptr++ = htonl(sp[this_sack].start_seq);
-- *ptr++ = htonl(sp[this_sack].end_seq);
-+ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
-+ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
- }
-
- tp->rx_opt.dsack = 0;
-@@ -525,13 +531,14 @@ static void tcp_options_write(__be32 *pt
-
- if (foc->exp) {
- len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len;
-- *ptr = htonl((TCPOPT_EXP << 24) | (len << 16) |
-+ net_hdr_word(ptr) =
-+ htonl((TCPOPT_EXP << 24) | (len << 16) |
- TCPOPT_FASTOPEN_MAGIC);
- p += TCPOLEN_EXP_FASTOPEN_BASE;
- } else {
- len = TCPOLEN_FASTOPEN_BASE + foc->len;
-- *p++ = TCPOPT_FASTOPEN;
-- *p++ = len;
-+ net_hdr_word(p++) = TCPOPT_FASTOPEN;
-+ net_hdr_word(p++) = len;
- }
-
- memcpy(p, foc->val, foc->len);
---- a/net/ipv4/igmp.c
-+++ b/net/ipv4/igmp.c
-@@ -548,7 +548,7 @@ static struct sk_buff *add_grec(struct s
- if (!skb)
- return NULL;
- psrc = skb_put(skb, sizeof(__be32));
-- *psrc = psf->sf_inaddr;
-+ net_hdr_word(psrc) = psf->sf_inaddr;
- scount++; stotal++;
- if ((type == IGMPV3_ALLOW_NEW_SOURCES ||
- type == IGMPV3_BLOCK_OLD_SOURCES) && psf->sf_crcount) {
---- a/include/uapi/linux/igmp.h
-+++ b/include/uapi/linux/igmp.h
-@@ -33,7 +33,7 @@ struct igmphdr {
- __u8 code; /* For newer IGMP */
- __sum16 csum;
- __be32 group;
--};
-+} __attribute__((packed, aligned(2)));
-
- /* V3 group record types [grec_type] */
- #define IGMPV3_MODE_IS_INCLUDE 1
-@@ -49,7 +49,7 @@ struct igmpv3_grec {
- __be16 grec_nsrcs;
- __be32 grec_mca;
- __be32 grec_src[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- struct igmpv3_report {
- __u8 type;
-@@ -58,7 +58,7 @@ struct igmpv3_report {
- __be16 resv2;
- __be16 ngrec;
- struct igmpv3_grec grec[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- struct igmpv3_query {
- __u8 type;
-@@ -79,7 +79,7 @@ struct igmpv3_query {
- __u8 qqic;
- __be16 nsrcs;
- __be32 srcs[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */
- #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */
---- a/net/core/flow_dissector.c
-+++ b/net/core/flow_dissector.c
-@@ -109,7 +109,7 @@ __be32 __skb_flow_get_ports(const struct
- ports = __skb_header_pointer(skb, thoff + poff,
- sizeof(_ports), data, hlen, &_ports);
- if (ports)
-- return *ports;
-+ return (__be32)net_hdr_word(ports);
- }
-
- return 0;
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -77,7 +77,7 @@ struct icmp6hdr {
- #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other
- #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime
- #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref
--};
-+} __attribute__((packed, aligned(2)));
-
-
- #define ICMPV6_ROUTER_PREF_LOW 0x3
---- a/include/net/ndisc.h
-+++ b/include/net/ndisc.h
-@@ -89,7 +89,7 @@ struct ra_msg {
- struct icmp6hdr icmph;
- __be32 reachable_time;
- __be32 retrans_timer;
--};
-+} __attribute__((packed, aligned(2)));
-
- struct rd_msg {
- struct icmp6hdr icmph;
-@@ -368,10 +368,10 @@ static inline u32 ndisc_hashfn(const voi
- {
- const u32 *p32 = pkey;
-
-- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
-- (p32[1] * hash_rnd[1]) +
-- (p32[2] * hash_rnd[2]) +
-- (p32[3] * hash_rnd[3]));
-+ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
-+ (net_hdr_word(&p32[1]) * hash_rnd[1]) +
-+ (net_hdr_word(&p32[2]) * hash_rnd[2]) +
-+ (net_hdr_word(&p32[3]) * hash_rnd[3]));
- }
-
- static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
---- a/net/sched/cls_u32.c
-+++ b/net/sched/cls_u32.c
-@@ -165,7 +165,7 @@ next_knode:
- data = skb_header_pointer(skb, toff, 4, &hdata);
- if (!data)
- goto out;
-- if ((*data ^ key->val) & key->mask) {
-+ if ((net_hdr_word(data) ^ key->val) & key->mask) {
- n = rcu_dereference_bh(n->next);
- goto next_knode;
- }
-@@ -218,8 +218,8 @@ check_terminal:
- &hdata);
- if (!data)
- goto out;
-- sel = ht->divisor & u32_hash_fold(*data, &n->sel,
-- n->fshift);
-+ sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
-+ &n->sel, n->fshift);
- }
- if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
- goto next_ht;
---- a/net/ipv6/ip6_offload.c
-+++ b/net/ipv6/ip6_offload.c
-@@ -221,7 +221,7 @@ static struct sk_buff **ipv6_gro_receive
- continue;
-
- iph2 = (struct ipv6hdr *)(p->data + off);
-- first_word = *(__be32 *)iph ^ *(__be32 *)iph2;
-+ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
-
- /* All fields must match except length and Traffic Class.
- * XXX skbs on the gro_list have all been parsed and pulled
---- a/include/net/addrconf.h
-+++ b/include/net/addrconf.h
-@@ -47,7 +47,7 @@ struct prefix_info {
- __be32 reserved2;
-
- struct in6_addr prefix;
--};
-+} __attribute__((packed, aligned(2)));
-
- #include <linux/netdevice.h>
- #include <net/if_inet6.h>
---- a/include/net/inet_ecn.h
-+++ b/include/net/inet_ecn.h
-@@ -125,9 +125,9 @@ static inline int IP6_ECN_set_ce(struct
- if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
- return 0;
-
-- from = *(__be32 *)iph;
-+ from = net_hdr_word(iph);
- to = from | htonl(INET_ECN_CE << 20);
-- *(__be32 *)iph = to;
-+ net_hdr_word(iph) = to;
- if (skb->ip_summed == CHECKSUM_COMPLETE)
- skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from),
- (__force __wsum)to);
-@@ -136,7 +136,7 @@ static inline int IP6_ECN_set_ce(struct
-
- static inline void IP6_ECN_clear(struct ipv6hdr *iph)
- {
-- *(__be32*)iph &= ~htonl(INET_ECN_MASK << 20);
-+ net_hdr_word(iph) &= ~htonl(INET_ECN_MASK << 20);
- }
-
- static inline void ipv6_copy_dscp(unsigned int dscp, struct ipv6hdr *inner)
---- a/include/net/ipv6.h
-+++ b/include/net/ipv6.h
-@@ -108,7 +108,7 @@ struct frag_hdr {
- __u8 reserved;
- __be16 frag_off;
- __be32 identification;
--};
-+} __attribute__((packed, aligned(2)));
-
- #define IP6_MF 0x0001
- #define IP6_OFFSET 0xFFF8
-@@ -437,8 +437,8 @@ static inline void __ipv6_addr_set_half(
- }
- #endif
- #endif
-- addr[0] = wh;
-- addr[1] = wl;
-+ net_hdr_word(&addr[0]) = wh;
-+ net_hdr_word(&addr[1]) = wl;
- }
-
- static inline void ipv6_addr_set(struct in6_addr *addr,
-@@ -497,6 +497,8 @@ static inline bool ipv6_prefix_equal(con
- const __be32 *a1 = addr1->s6_addr32;
- const __be32 *a2 = addr2->s6_addr32;
- unsigned int pdw, pbi;
-+ /* Used for last <32-bit fraction of prefix */
-+ u32 pbia1, pbia2;
-
- /* check complete u32 in prefix */
- pdw = prefixlen >> 5;
-@@ -505,7 +507,9 @@ static inline bool ipv6_prefix_equal(con
-
- /* check incomplete u32 in prefix */
- pbi = prefixlen & 0x1f;
-- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
-+ pbia1 = net_hdr_word(&a1[pdw]);
-+ pbia2 = net_hdr_word(&a2[pdw]);
-+ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
- return false;
-
- return true;
-@@ -605,13 +609,13 @@ static inline void ipv6_addr_set_v4mappe
- */
- static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
- {
-- const __be32 *a1 = token1, *a2 = token2;
-+ const struct in6_addr *a1 = token1, *a2 = token2;
- int i;
-
- addrlen >>= 2;
-
- for (i = 0; i < addrlen; i++) {
-- __be32 xb = a1[i] ^ a2[i];
-+ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
- if (xb)
- return i * 32 + 31 - __fls(ntohl(xb));
- }
-@@ -780,17 +784,18 @@ static inline int ip6_default_np_autolab
- static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
- __be32 flowlabel)
- {
-- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
-+ net_hdr_word((__be32 *)hdr) =
-+ htonl(0x60000000 | (tclass << 20)) | flowlabel;
- }
-
- static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
- {
-- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
-+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
- }
-
- static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr)
- {
-- return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK;
-+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK;
- }
-
- static inline u8 ip6_tclass(__be32 flowinfo)
---- a/include/net/secure_seq.h
-+++ b/include/net/secure_seq.h
-@@ -3,6 +3,7 @@
- #define _NET_SECURE_SEQ
-
- #include <linux/types.h>
-+#include <linux/in6.h>
-
- u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
- u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
---- a/include/uapi/linux/in.h
-+++ b/include/uapi/linux/in.h
-@@ -84,7 +84,7 @@ enum {
- /* Internet address. */
- struct in_addr {
- __be32 s_addr;
--};
-+} __attribute__((packed, aligned(2)));
- #endif
-
- #define IP_TOS 1
---- a/net/ipv6/ip6_fib.c
-+++ b/net/ipv6/ip6_fib.c
-@@ -137,7 +137,7 @@ static __be32 addr_bit_set(const void *t
- * See include/asm-generic/bitops/le.h.
- */
- return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
-- addr[fn_bit >> 5];
-+ net_hdr_word(&addr[fn_bit >> 5]);
- }
-
- static struct fib6_node *node_alloc(void)
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -447,7 +447,7 @@ static void tcp_sack(const struct sk_buf
-
- /* Fast path for timestamp-only option */
- if (length == TCPOLEN_TSTAMP_ALIGNED
-- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
-+ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
- | (TCPOPT_NOP << 16)
- | (TCPOPT_TIMESTAMP << 8)
- | TCPOLEN_TIMESTAMP))
---- a/net/xfrm/xfrm_input.c
-+++ b/net/xfrm/xfrm_input.c
-@@ -193,8 +193,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
- if (!pskb_may_pull(skb, hlen))
- return -EINVAL;
-
-- *spi = *(__be32 *)(skb_transport_header(skb) + offset);
-- *seq = *(__be32 *)(skb_transport_header(skb) + offset_seq);
-+ *spi = net_hdr_word(skb_transport_header(skb) + offset);
-+ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
- return 0;
- }
- EXPORT_SYMBOL(xfrm_parse_spi);
---- a/net/ipv4/tcp_input.c
-+++ b/net/ipv4/tcp_input.c
-@@ -3879,14 +3879,16 @@ static bool tcp_parse_aligned_timestamp(
- {
- const __be32 *ptr = (const __be32 *)(th + 1);
-
-- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
-- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
-+ if (net_hdr_word(ptr) ==
-+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
- tp->rx_opt.saw_tstamp = 1;
- ++ptr;
-- tp->rx_opt.rcv_tsval = ntohl(*ptr);
-+ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
- ++ptr;
-- if (*ptr)
-- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
-+ if (net_hdr_word(ptr))
-+ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) -
-+ tp->tsoffset;
- else
- tp->rx_opt.rcv_tsecr = 0;
- return true;
---- a/include/uapi/linux/if_pppox.h
-+++ b/include/uapi/linux/if_pppox.h
-@@ -51,6 +51,7 @@ struct pppoe_addr {
- */
- struct pptp_addr {
- __u16 call_id;
-+ __u16 pad;
- struct in_addr sin_addr;
- };
-
---- a/net/ipv6/netfilter/nf_log_ipv6.c
-+++ b/net/ipv6/netfilter/nf_log_ipv6.c
-@@ -66,9 +66,9 @@ static void dump_ipv6_packet(struct nf_l
- /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */
- nf_log_buf_add(m, "LEN=%zu TC=%u HOPLIMIT=%u FLOWLBL=%u ",
- ntohs(ih->payload_len) + sizeof(struct ipv6hdr),
-- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20,
-+ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20,
- ih->hop_limit,
-- (ntohl(*(__be32 *)ih) & 0x000fffff));
-+ (ntohl(net_hdr_word(ih)) & 0x000fffff));
-
- fragment = 0;
- ptr = ip6hoff + sizeof(struct ipv6hdr);
---- a/include/net/neighbour.h
-+++ b/include/net/neighbour.h
-@@ -265,8 +265,10 @@ static inline bool neigh_key_eq128(const
- const u32 *n32 = (const u32 *)n->primary_key;
- const u32 *p32 = pkey;
-
-- return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
-- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0;
-+ return ((n32[0] ^ net_hdr_word(&p32[0])) |
-+ (n32[1] ^ net_hdr_word(&p32[1])) |
-+ (n32[2] ^ net_hdr_word(&p32[2])) |
-+ (n32[3] ^ net_hdr_word(&p32[3]))) == 0;
- }
-
- static inline struct neighbour *___neigh_lookup_noref(
---- a/include/uapi/linux/netfilter_arp/arp_tables.h
-+++ b/include/uapi/linux/netfilter_arp/arp_tables.h
-@@ -70,7 +70,7 @@ struct arpt_arp {
- __u8 flags;
- /* Inverse flags */
- __u16 invflags;
--};
-+} __attribute__((aligned(4)));
-
- /* Values for "flag" field in struct arpt_ip (general arp structure).
- * No flags defined yet.
---- a/net/core/utils.c
-+++ b/net/core/utils.c
-@@ -441,8 +441,14 @@ void inet_proto_csum_replace16(__sum16 *
- bool pseudohdr)
- {
- __be32 diff[] = {
-- ~from[0], ~from[1], ~from[2], ~from[3],
-- to[0], to[1], to[2], to[3],
-+ ~net_hdr_word(&from[0]),
-+ ~net_hdr_word(&from[1]),
-+ ~net_hdr_word(&from[2]),
-+ ~net_hdr_word(&from[3]),
-+ net_hdr_word(&to[0]),
-+ net_hdr_word(&to[1]),
-+ net_hdr_word(&to[2]),
-+ net_hdr_word(&to[3]),
- };
- if (skb->ip_summed != CHECKSUM_PARTIAL) {
- *sum = csum_fold(csum_partial(diff, sizeof(diff),
---- a/drivers/net/vxlan.c
-+++ b/drivers/net/vxlan.c
-@@ -1872,15 +1872,15 @@ static int vxlan_build_skb(struct sk_buf
- return err;
-
- vxh = __skb_push(skb, sizeof(*vxh));
-- vxh->vx_flags = VXLAN_HF_VNI;
-- vxh->vx_vni = vxlan_vni_field(vni);
-+ net_hdr_word(&vxh->vx_flags) = VXLAN_HF_VNI;
-+ net_hdr_word(&vxh->vx_vni) = vxlan_vni_field(vni);
-
- if (type & SKB_GSO_TUNNEL_REMCSUM) {
- unsigned int start;
-
- start = skb_checksum_start_offset(skb) - sizeof(struct vxlanhdr);
-- vxh->vx_vni |= vxlan_compute_rco(start, skb->csum_offset);
-- vxh->vx_flags |= VXLAN_HF_RCO;
-+ net_hdr_word(&vxh->vx_vni) |= vxlan_compute_rco(start, skb->csum_offset);
-+ net_hdr_word(&vxh->vx_flags) |= VXLAN_HF_RCO;
-
- if (!skb_is_gso(skb)) {
- skb->ip_summed = CHECKSUM_NONE;
---- a/include/linux/etherdevice.h
-+++ b/include/linux/etherdevice.h
-@@ -480,7 +480,7 @@ static inline bool is_etherdev_addr(cons
- * @b: Pointer to Ethernet header
- *
- * Compare two Ethernet headers, returns 0 if equal.
-- * This assumes that the network header (i.e., IP header) is 4-byte
-+ * This assumes that the network header (i.e., IP header) is 2-byte
- * aligned OR the platform can handle unaligned access. This is the
- * case for all packets coming into netif_receive_skb or similar
- * entry points.
-@@ -503,11 +503,12 @@ static inline unsigned long compare_ethe
- fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6);
- return fold;
- #else
-- u32 *a32 = (u32 *)((u8 *)a + 2);
-- u32 *b32 = (u32 *)((u8 *)b + 2);
-+ const u16 *a16 = a;
-+ const u16 *b16 = b;
-
-- return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
-- (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
-+ return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) |
-+ (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) |
-+ (a16[6] ^ b16[6]);
- #endif
- }
-
---- a/net/ipv4/tcp_offload.c
-+++ b/net/ipv4/tcp_offload.c
-@@ -226,7 +226,7 @@ struct sk_buff **tcp_gro_receive(struct
-
- th2 = tcp_hdr(p);
-
-- if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
-+ if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) {
- NAPI_GRO_CB(p)->same_flow = 0;
- continue;
- }
-@@ -244,8 +244,8 @@ found:
- ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH));
- flush |= (__force int)(th->ack_seq ^ th2->ack_seq);
- for (i = sizeof(*th); i < thlen; i += 4)
-- flush |= *(u32 *)((u8 *)th + i) ^
-- *(u32 *)((u8 *)th2 + i);
-+ flush |= net_hdr_word((u8 *)th + i) ^
-+ net_hdr_word((u8 *)th2 + i);
-
- /* When we receive our second frame we can made a decision on if we
- * continue this flow as an atomic flow with a fixed ID or if we use
---- a/net/ipv6/netfilter/ip6table_mangle.c
-+++ b/net/ipv6/netfilter/ip6table_mangle.c
-@@ -50,7 +50,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- hop_limit = ipv6_hdr(skb)->hop_limit;
-
- /* flowlabel and prio (includes version, which shouldn't change either */
-- flowlabel = *((u_int32_t *)ipv6_hdr(skb));
-+ flowlabel = net_hdr_word(ipv6_hdr(skb));
-
- ret = ip6t_do_table(skb, state, state->net->ipv6.ip6table_mangle);
-
-@@ -59,7 +59,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) ||
- skb->mark != mark ||
- ipv6_hdr(skb)->hop_limit != hop_limit ||
-- flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) {
-+ flowlabel != net_hdr_word(ipv6_hdr(skb)))) {
- err = ip6_route_me_harder(state->net, skb);
- if (err < 0)
- ret = NF_DROP_ERR(err);
diff --git a/target/linux/ar71xx/patches-4.14/920-usb-chipidea-AR933x-platform-support.patch b/target/linux/ar71xx/patches-4.14/920-usb-chipidea-AR933x-platform-support.patch
deleted file mode 100644
index b0e69af9c1..0000000000
--- a/target/linux/ar71xx/patches-4.14/920-usb-chipidea-AR933x-platform-support.patch
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -659,6 +659,7 @@
-
- #define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
- #define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
-+#define AR933X_BOOTSTRAP_USB_MODE_HOST BIT(3)
- #define AR933X_BOOTSTRAP_REF_CLK_40 BIT(0)
-
- #define AR934X_BOOTSTRAP_SW_OPTION8 BIT(23)
-@@ -688,6 +689,8 @@
-
- #define QCA956X_BOOTSTRAP_REF_CLK_40 BIT(2)
-
-+#define AR933X_USB_CONFIG_HOST_ONLY BIT(8)
-+
- #define AR934X_PCIE_WMAC_INT_WMAC_MISC BIT(0)
- #define AR934X_PCIE_WMAC_INT_WMAC_TX BIT(1)
- #define AR934X_PCIE_WMAC_INT_WMAC_RXLP BIT(2)
---- a/arch/mips/ath79/dev-usb.c
-+++ b/arch/mips/ath79/dev-usb.c
-@@ -19,6 +19,9 @@
- #include <linux/platform_device.h>
- #include <linux/usb/ehci_pdriver.h>
- #include <linux/usb/ohci_pdriver.h>
-+#include <linux/usb/otg.h>
-+#include <linux/usb/chipidea.h>
-+#include <linux/usb/usb_phy_generic.h>
-
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-@@ -170,6 +173,44 @@ static void __init ar913x_usb_setup(void
- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
- }
-
-+static void __init ar9xxx_ci_usb_setup(int bus_id, int irq)
-+{
-+ struct ci_hdrc_platform_data ci_pdata;
-+ bool host_mode = true;
-+
-+ if (soc_is_ar933x())
-+ host_mode = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP) &
-+ AR933X_BOOTSTRAP_USB_MODE_HOST;
-+ else
-+ host_mode = !(ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP) &
-+ AR934X_BOOTSTRAP_USB_MODE_DEVICE);
-+
-+ if (host_mode) {
-+ ath79_usb_register("ehci-platform", bus_id,
-+ AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
-+ irq, &ath79_ehci_pdata_v2,
-+ sizeof(ath79_ehci_pdata_v2));
-+
-+ return;
-+ }
-+
-+ memset(&ci_pdata, 0, sizeof(ci_pdata));
-+ ci_pdata.name = "ci_hdrc_ar9xxx";
-+ ci_pdata.capoffset = DEF_CAPOFFSET;
-+ ci_pdata.dr_mode = USB_DR_MODE_PERIPHERAL;
-+ ci_pdata.flags = CI_HDRC_DUAL_ROLE_NOT_OTG | CI_HDRC_DP_ALWAYS_PULLUP;
-+ ci_pdata.vbus_extcon.edev = ERR_PTR(-ENODEV);
-+ ci_pdata.id_extcon.edev = ERR_PTR(-ENODEV);
-+ ci_pdata.itc_setting = 1;
-+
-+ platform_device_register_simple("usb_phy_generic",
-+ PLATFORM_DEVID_AUTO, NULL, 0);
-+
-+ ath79_usb_register("ci_hdrc", -1,
-+ AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
-+ irq, &ci_pdata, sizeof(ci_pdata));
-+}
-+
- static void __init ar933x_usb_setup(void)
- {
- ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE);
-@@ -181,10 +222,7 @@ static void __init ar933x_usb_setup(void
- ath79_device_reset_clear(AR933X_RESET_USB_PHY);
- mdelay(10);
-
-- ath79_usb_register("ehci-platform", -1,
-- AR933X_EHCI_BASE, AR933X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+ ar9xxx_ci_usb_setup(-1, ATH79_CPU_IRQ(3));
- }
-
- static void enable_tx_tx_idp_violation_fix(unsigned base)
-@@ -230,10 +268,7 @@ static void __init ar934x_usb_setup(void
- if (ath79_soc_rev >= 3)
- ath79_ehci_pdata_v2.reset_notifier = ar934x_usb_reset_notifier;
-
-- ath79_usb_register("ehci-platform", -1,
-- AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+ ar9xxx_ci_usb_setup(-1, ATH79_CPU_IRQ(3));
- }
-
- static void __init qca953x_usb_setup(void)
-@@ -254,10 +289,7 @@ static void __init qca953x_usb_setup(voi
- ath79_device_reset_clear(QCA953X_RESET_USB_HOST);
- udelay(1000);
-
-- ath79_usb_register("ehci-platform", -1,
-- QCA953X_EHCI_BASE, QCA953X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+ ar9xxx_ci_usb_setup(-1, ATH79_CPU_IRQ(3));
- }
-
- static void qca955x_usb_reset_notifier(struct platform_device *pdev)
-@@ -285,10 +317,7 @@ static void __init qca955x_usb_setup(voi
- {
- ath79_ehci_pdata_v2.reset_notifier = qca955x_usb_reset_notifier;
-
-- ath79_usb_register("ehci-platform", 0,
-- QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
-- ATH79_IP3_IRQ(0),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
-+ ar9xxx_ci_usb_setup(0, ATH79_IP3_IRQ(0));
-
- ath79_usb_register("ehci-platform", 1,
- QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE,
diff --git a/target/linux/ar71xx/patches-4.14/921-MIPS-ath79-add-even-more-register-defines-for-QCA956x-SoC.patch b/target/linux/ar71xx/patches-4.14/921-MIPS-ath79-add-even-more-register-defines-for-QCA956x-SoC.patch
deleted file mode 100644
index a4608ea48d..0000000000
--- a/target/linux/ar71xx/patches-4.14/921-MIPS-ath79-add-even-more-register-defines-for-QCA956x-SoC.patch
+++ /dev/null
@@ -1,194 +0,0 @@
-Add more registers for QCA955x and QCA956x.
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -175,6 +175,35 @@
- /*
- * Hidden Registers
- */
-+#define QCA956X_MAC_CFG_BASE 0xb9000000
-+#define QCA956X_MAC_CFG_SIZE 0x64
-+
-+#define QCA956X_MAC_CFG1_REG 0x00
-+#define QCA956X_MAC_CFG1_SOFT_RST BIT(31)
-+#define QCA956X_MAC_CFG1_RX_RST BIT(19)
-+#define QCA956X_MAC_CFG1_TX_RST BIT(18)
-+#define QCA956X_MAC_CFG1_LOOPBACK BIT(8)
-+#define QCA956X_MAC_CFG1_RX_EN BIT(2)
-+#define QCA956X_MAC_CFG1_TX_EN BIT(0)
-+
-+#define QCA956X_MAC_CFG2_REG 0x04
-+#define QCA956X_MAC_CFG2_IF_1000 BIT(9)
-+#define QCA956X_MAC_CFG2_IF_10_100 BIT(8)
-+#define QCA956X_MAC_CFG2_HUGE_FRAME_EN BIT(5)
-+#define QCA956X_MAC_CFG2_LEN_CHECK BIT(4)
-+#define QCA956X_MAC_CFG2_PAD_CRC_EN BIT(2)
-+#define QCA956X_MAC_CFG2_FDX BIT(0)
-+
-+#define QCA956X_MAC_MII_MGMT_CFG_REG 0x20
-+#define QCA956X_MGMT_CFG_CLK_DIV_20 0x07
-+
-+#define QCA956X_MAC_FIFO_CFG0_REG 0x48
-+#define QCA956X_MAC_FIFO_CFG1_REG 0x4c
-+#define QCA956X_MAC_FIFO_CFG2_REG 0x50
-+#define QCA956X_MAC_FIFO_CFG3_REG 0x54
-+#define QCA956X_MAC_FIFO_CFG4_REG 0x58
-+#define QCA956X_MAC_FIFO_CFG5_REG 0x5c
-+
- #define QCA956X_DAM_RESET_OFFSET 0xb90001bc
- #define QCA956X_DAM_RESET_SIZE 0x4
- #define QCA956X_INLINE_CHKSUM_ENG BIT(27)
-@@ -384,6 +413,7 @@
- #define QCA955X_PLL_CLK_CTRL_REG 0x08
- #define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
- #define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
-+#define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c
-
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_SHIFT 0
- #define QCA955X_PLL_CPU_CONFIG_NFRAC_MASK 0x3f
-@@ -416,12 +446,18 @@
- #define QCA955X_PLL_CLK_CTRL_DDRCLK_FROM_DDRPLL BIT(21)
- #define QCA955X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define QCA955X_PLL_ETH_SGMII_SERDES_LOCK_DETECT BIT(2)
-+#define QCA955X_PLL_ETH_SGMII_SERDES_PLL_REFCLK BIT(1)
-+#define QCA955X_PLL_ETH_SGMII_SERDES_EN_PLL BIT(0)
-+
- #define QCA956X_PLL_CPU_CONFIG_REG 0x00
- #define QCA956X_PLL_CPU_CONFIG1_REG 0x04
- #define QCA956X_PLL_DDR_CONFIG_REG 0x08
- #define QCA956X_PLL_DDR_CONFIG1_REG 0x0c
- #define QCA956X_PLL_CLK_CTRL_REG 0x10
-+#define QCA956X_PLL_SWITCH_CLOCK_CONTROL_REG 0x28
- #define QCA956X_PLL_ETH_XMII_CONTROL_REG 0x30
-+#define QCA956X_PLL_ETH_SGMII_SERDES_REG 0x4c
-
- #define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
- #define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
-@@ -460,6 +496,31 @@
- #define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21)
- #define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_I2C_CLK_SELB BIT(5)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_1 BIT(6)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_UART1_CLK_SEL BIT(7)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_SHIFT 8
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_USB_REFCLK_FREQ_SEL_MASK 0xf
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EN_PLL_TOP BIT(12)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_2 BIT(13)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_1 BIT(14)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL1_2 BIT(15)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCH_FUNC_TST_MODE BIT(16)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_EEE_ENABLE BIT(17)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_OEN_CLK125M_PLL BIT(18)
-+#define QCA956X_PLL_SWITCH_CLOCK_SPARE_SWITCHCLK_SEL BIT(19)
-+
-+#define QCA956X_PLL_ETH_XMII_TX_INVERT BIT(1)
-+#define QCA956X_PLL_ETH_XMII_GIGE BIT(25)
-+#define QCA956X_PLL_ETH_XMII_RX_DELAY_SHIFT 28
-+#define QCA956X_PLL_ETH_XMII_RX_DELAY_MASK 0x3
-+#define QCA956X_PLL_ETH_XMII_TX_DELAY_SHIFT 26
-+#define QCA956X_PLL_ETH_XMII_TX_DELAY_MASK 3
-+
-+#define QCA956X_PLL_ETH_SGMII_SERDES_LOCK_DETECT BIT(2)
-+#define QCA956X_PLL_ETH_SGMII_SERDES_PLL_REFCLK BIT(1)
-+#define QCA956X_PLL_ETH_SGMII_SERDES_EN_PLL BIT(0)
-+
- /*
- * USB_CONFIG block
- */
-@@ -657,6 +718,25 @@
- #define QCA955X_RESET_MBOX BIT(1)
- #define QCA955X_RESET_I2S BIT(0)
-
-+#define QCA956X_RESET_EXTERNAL BIT(28)
-+#define QCA956X_RESET_FULL_CHIP BIT(24)
-+#define QCA956X_RESET_GE1_MDIO BIT(23)
-+#define QCA956X_RESET_GE0_MDIO BIT(22)
-+#define QCA956X_RESET_CPU_NMI BIT(21)
-+#define QCA956X_RESET_CPU_COLD BIT(20)
-+#define QCA956X_RESET_DMA BIT(19)
-+#define QCA956X_RESET_DDR BIT(16)
-+#define QCA956X_RESET_GE1_MAC BIT(13)
-+#define QCA956X_RESET_SGMII_ANALOG BIT(12)
-+#define QCA956X_RESET_USB_PHY_ANALOG BIT(11)
-+#define QCA956X_RESET_GE0_MAC BIT(9)
-+#define QCA956X_RESET_SGMII BIT(8)
-+#define QCA956X_RESET_USB_HOST BIT(5)
-+#define QCA956X_RESET_USB_PHY BIT(4)
-+#define QCA956X_RESET_USBSUS_OVERRIDE BIT(3)
-+#define QCA956X_RESET_SWITCH_ANALOG BIT(2)
-+#define QCA956X_RESET_SWITCH BIT(0)
-+
- #define AR933X_BOOTSTRAP_MDIO_GPIO_EN BIT(18)
- #define AR933X_BOOTSTRAP_EEPBUSY BIT(4)
- #define AR933X_BOOTSTRAP_USB_MODE_HOST BIT(3)
-@@ -1189,6 +1269,7 @@
- */
-
- #define QCA955X_GMAC_REG_ETH_CFG 0x00
-+#define QCA955X_GMAC_REG_SGMII_SERDES 0x18
-
- #define QCA955X_ETH_CFG_RGMII_EN BIT(0)
- #define QCA955X_ETH_CFG_MII_GE0 BIT(1)
-@@ -1210,16 +1291,58 @@
- #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
- #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
-
-+#define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)
-+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
-+#define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
- /*
- * QCA956X GMAC Interface
- */
-
--#define QCA956X_GMAC_REG_ETH_CFG 0x00
-+#define QCA956X_GMAC_REG_ETH_CFG 0x00
-+#define QCA956X_GMAC_REG_SGMII_RESET 0x14
-+#define QCA956X_GMAC_REG_SGMII_SERDES 0x18
-+#define QCA956X_GMAC_REG_MR_AN_CONTROL 0x1c
-+#define QCA956X_GMAC_REG_SGMII_CONFIG 0x34
-+#define QCA956X_GMAC_REG_SGMII_DEBUG 0x58
-
-+#define QCA956X_ETH_CFG_RGMII_EN BIT(0)
-+#define QCA956X_ETH_CFG_GE0_SGMII BIT(6)
- #define QCA956X_ETH_CFG_SW_ONLY_MODE BIT(7)
--#define QCA956X_ETH_CFG_SW_PHY_SWAP BIT(8)
-+#define QCA956X_ETH_CFG_SW_PHY_SWAP BIT(8)
- #define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(9)
- #define QCA956X_ETH_CFG_SW_APB_ACCESS BIT(10)
- #define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
-+#define QCA956X_ETH_CFG_RXD_DELAY_MASK 0x3
-+#define QCA956X_ETH_CFG_RXD_DELAY_SHIFT 14
-+#define QCA956X_ETH_CFG_RDV_DELAY_MASK 0x3
-+#define QCA956X_ETH_CFG_RDV_DELAY_SHIFT 16
-+
-+#define QCA956X_SGMII_RESET_RX_CLK_N_RESET 0x0
-+#define QCA956X_SGMII_RESET_RX_CLK_N BIT(0)
-+#define QCA956X_SGMII_RESET_TX_CLK_N BIT(1)
-+#define QCA956X_SGMII_RESET_RX_125M_N BIT(2)
-+#define QCA956X_SGMII_RESET_TX_125M_N BIT(3)
-+#define QCA956X_SGMII_RESET_HW_RX_125M_N BIT(4)
-+
-+#define QCA956X_SGMII_SERDES_CDR_BW_MASK 0x3
-+#define QCA956X_SGMII_SERDES_CDR_BW_SHIFT 1
-+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_MASK 0x7
-+#define QCA956X_SGMII_SERDES_TX_DR_CTRL_SHIFT 4
-+#define QCA956X_SGMII_SERDES_PLL_BW BIT(8)
-+#define QCA956X_SGMII_SERDES_VCO_FAST BIT(9)
-+#define QCA956X_SGMII_SERDES_VCO_SLOW BIT(10)
-+#define QCA956X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)
-+#define QCA956X_SGMII_SERDES_EN_SIGNAL_DETECT BIT(16)
-+#define QCA956X_SGMII_SERDES_FIBER_SDO BIT(17)
-+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
-+#define QCA956X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
-+#define QCA956X_SGMII_SERDES_VCO_REG_SHIFT 27
-+#define QCA956X_SGMII_SERDES_VCO_REG_MASK 0xf
-+
-+#define QCA956X_MR_AN_CONTROL_AN_ENABLE BIT(12)
-+#define QCA956X_MR_AN_CONTROL_PHY_RESET BIT(15)
-+
-+#define QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT 0
-+#define QCA956X_SGMII_CONFIG_MODE_CTRL_MASK 0x7
-
- #endif /* __ASM_MACH_AR71XX_REGS_H */
diff --git a/target/linux/ar71xx/patches-4.14/930-chipidea-pullup.patch b/target/linux/ar71xx/patches-4.14/930-chipidea-pullup.patch
deleted file mode 100644
index 2e9a878630..0000000000
--- a/target/linux/ar71xx/patches-4.14/930-chipidea-pullup.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/drivers/usb/chipidea/ci.h
-+++ b/drivers/usb/chipidea/ci.h
-@@ -205,6 +205,7 @@ struct hw_bank {
- * @in_lpm: if the core in low power mode
- * @wakeup_int: if wakeup interrupt occur
- * @rev: The revision number for controller
-+ * @dp_always_pullup: keep dp always pullup at device mode
- */
- struct ci_hdrc {
- struct device *dev;
-@@ -259,6 +260,7 @@ struct ci_hdrc {
- bool in_lpm;
- bool wakeup_int;
- enum ci_revision rev;
-+ bool dp_always_pullup;
- };
-
- static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
---- a/drivers/usb/chipidea/core.c
-+++ b/drivers/usb/chipidea/core.c
-@@ -818,7 +818,7 @@ static inline void ci_role_destroy(struc
- {
- ci_hdrc_gadget_destroy(ci);
- ci_hdrc_host_destroy(ci);
-- if (ci->is_otg && ci->roles[CI_ROLE_GADGET])
-+ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET])
- ci_hdrc_otg_destroy(ci);
- }
-
-@@ -923,6 +923,9 @@ static int ci_hdrc_probe(struct platform
- CI_HDRC_SUPPORTS_RUNTIME_PM);
- platform_set_drvdata(pdev, ci);
-
-+ ci->dp_always_pullup = !!(ci->platdata->flags &
-+ CI_HDRC_DP_ALWAYS_PULLUP);
-+
- ret = hw_device_init(ci, base);
- if (ret < 0) {
- dev_err(dev, "can't initialize hardware\n");
-@@ -1011,7 +1014,7 @@ static int ci_hdrc_probe(struct platform
- goto deinit_gadget;
- }
-
-- if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
-+ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET]) {
- ret = ci_hdrc_otg_init(ci);
- if (ret) {
- dev_err(dev, "init otg fails, ret = %d\n", ret);
---- a/drivers/usb/chipidea/otg.c
-+++ b/drivers/usb/chipidea/otg.c
-@@ -131,8 +131,10 @@ enum ci_role ci_otg_role(struct ci_hdrc
-
- void ci_handle_vbus_change(struct ci_hdrc *ci)
- {
-- if (!ci->is_otg)
-+ if (ci->dp_always_pullup) {
-+ usb_gadget_vbus_connect(&ci->gadget);
- return;
-+ }
-
- if (hw_read_otgsc(ci, OTGSC_BSV) && !ci->vbus_active)
- usb_gadget_vbus_connect(&ci->gadget);
---- a/include/linux/usb/chipidea.h
-+++ b/include/linux/usb/chipidea.h
-@@ -60,6 +60,7 @@ struct ci_hdrc_platform_data {
- #define CI_HDRC_OVERRIDE_RX_BURST BIT(11)
- #define CI_HDRC_OVERRIDE_PHY_CONTROL BIT(12) /* Glue layer manages phy */
- #define CI_HDRC_REQUIRES_ALIGNED_DMA BIT(13)
-+#define CI_HDRC_DP_ALWAYS_PULLUP BIT(14)
- enum usb_dr_mode dr_mode;
- #define CI_HDRC_CONTROLLER_RESET_EVENT 0
- #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1
diff --git a/target/linux/ar71xx/patches-4.14/940-qca955x-add-more-registers.patch b/target/linux/ar71xx/patches-4.14/940-qca955x-add-more-registers.patch
deleted file mode 100644
index ff72308465..0000000000
--- a/target/linux/ar71xx/patches-4.14/940-qca955x-add-more-registers.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -134,7 +134,7 @@
- #define QCA955X_PCI_CTRL_SIZE 0x100
-
- #define QCA955X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
--#define QCA955X_GMAC_SIZE 0x40
-+#define QCA955X_GMAC_SIZE 0x64
- #define QCA955X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
- #define QCA955X_WMAC_SIZE 0x20000
- #define QCA955X_EHCI0_BASE 0x1b000000
-@@ -1269,7 +1269,11 @@
- */
-
- #define QCA955X_GMAC_REG_ETH_CFG 0x00
-+#define QCA955X_GMAC_REG_SGMII_RESET 0x14
- #define QCA955X_GMAC_REG_SGMII_SERDES 0x18
-+#define QCA955X_GMAC_REG_MR_AN_CONTROL 0x1c
-+#define QCA955X_GMAC_REG_MR_AN_STATUS 0x20
-+#define QCA955X_GMAC_REG_SGMII_DEBUG 0x58
-
- #define QCA955X_ETH_CFG_RGMII_EN BIT(0)
- #define QCA955X_ETH_CFG_MII_GE0 BIT(1)
-@@ -1291,6 +1295,18 @@
- #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
- #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
-
-+#define QCA955X_SGMII_RESET_RX_CLK_N_RESET 0x0
-+#define QCA955X_SGMII_RESET_RX_CLK_N BIT(0)
-+#define QCA955X_SGMII_RESET_TX_CLK_N BIT(1)
-+#define QCA955X_SGMII_RESET_RX_125M_N BIT(2)
-+#define QCA955X_SGMII_RESET_TX_125M_N BIT(3)
-+#define QCA955X_SGMII_RESET_HW_RX_125M_N BIT(4)
-+
-+#define QCA955X_MR_AN_CONTROL_PHY_RESET BIT(15)
-+#define QCA955X_MR_AN_CONTROL_AN_ENABLE BIT(12)
-+
-+#define QCA955X_MR_AN_STATUS_AN_ABILITY BIT(3)
-+
- #define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)
- #define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
- #define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
diff --git a/target/linux/ar71xx/patches-4.14/950-add-boardinfo-platform-data.patch b/target/linux/ar71xx/patches-4.14/950-add-boardinfo-platform-data.patch
deleted file mode 100644
index edeac838d9..0000000000
--- a/target/linux/ar71xx/patches-4.14/950-add-boardinfo-platform-data.patch
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/drivers/net/phy/mdio-boardinfo.c
-+++ b/drivers/net/phy/mdio-boardinfo.c
-@@ -15,8 +15,11 @@
-
- #include "mdio-boardinfo.h"
-
--static LIST_HEAD(mdio_board_list);
--static DEFINE_MUTEX(mdio_board_lock);
-+LIST_HEAD(mdio_board_list);
-+EXPORT_SYMBOL_GPL(mdio_board_list);
-+
-+DEFINE_MUTEX(mdio_board_lock);
-+EXPORT_SYMBOL_GPL(mdio_board_lock);
-
- /**
- * mdiobus_setup_mdiodev_from_board_info - create and setup MDIO devices
---- a/drivers/net/phy/mdio-boardinfo.h
-+++ b/drivers/net/phy/mdio-boardinfo.h
-@@ -20,4 +20,7 @@ void mdiobus_setup_mdiodev_from_board_in
- (struct mii_bus *bus,
- struct mdio_board_info *bi));
-
-+extern struct mutex mdio_board_lock;
-+extern struct list_head mdio_board_list;
-+
- #endif /* __MDIO_BOARD_INFO_H */
---- a/drivers/net/phy/mdio_bus.c
-+++ b/drivers/net/phy/mdio_bus.c
-@@ -455,6 +455,17 @@ void mdiobus_free(struct mii_bus *bus)
- }
- EXPORT_SYMBOL(mdiobus_free);
-
-+static void mdiobus_setup_phydev_from_boardinfo(struct mii_bus *bus,
-+ struct phy_device *phydev,
-+ struct mdio_board_info *bi)
-+{
-+ if (strcmp(bus->id, bi->bus_id) ||
-+ bi->mdio_addr != phydev->mdio.addr)
-+ return;
-+
-+ phydev->mdio.dev.platform_data = (void *) bi->platform_data;
-+}
-+
- /**
- * mdiobus_scan - scan a bus for MDIO devices.
- * @bus: mii_bus to scan
-@@ -470,6 +481,7 @@ EXPORT_SYMBOL(mdiobus_free);
- struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
- {
- struct phy_device *phydev;
-+ struct mdio_board_entry *be;
- int err;
-
- phydev = get_phy_device(bus, addr, false);
-@@ -482,6 +494,12 @@ struct phy_device *mdiobus_scan(struct m
- */
- of_mdiobus_link_mdiodev(bus, &phydev->mdio);
-
-+ mutex_lock(&mdio_board_lock);
-+ list_for_each_entry(be, &mdio_board_list, list)
-+ mdiobus_setup_phydev_from_boardinfo(bus, phydev,
-+ &be->board_info);
-+ mutex_unlock(&mdio_board_lock);
-+
- err = phy_device_register(phydev);
- if (err) {
- phy_device_free(phydev);
diff --git a/target/linux/ar71xx/patches-4.14/952-qca955x-enable-ddr-wb-flush.patch b/target/linux/ar71xx/patches-4.14/952-qca955x-enable-ddr-wb-flush.patch
deleted file mode 100644
index 16d17b8a0e..0000000000
--- a/target/linux/ar71xx/patches-4.14/952-qca955x-enable-ddr-wb-flush.patch
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -49,6 +49,8 @@ void ath79_ddr_ctrl_init(void)
- if (soc_is_ar913x() || soc_is_ar724x() || soc_is_ar933x()) {
- ath79_ddr_wb_flush_base = ath79_ddr_base + 0x7c;
- ath79_ddr_pci_win_base = 0;
-+ } else if (soc_is_qca953x() || soc_is_qca955x()) {
-+ ath79_ddr_wb_flush_base = ath79_ddr_base + 0x9c;
- } else {
- ath79_ddr_wb_flush_base = ath79_ddr_base + 0x9c;
- ath79_ddr_pci_win_base = ath79_ddr_base + 0x7c;
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -105,12 +105,12 @@ static void qca955x_ip2_irq_dispatch(str
- }
-
- if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) {
-- /* TODO: flush DDR? */
-+ ath79_ddr_wb_flush(3);
- generic_handle_irq(ATH79_IP2_IRQ(0));
- }
-
- if (status & QCA955X_EXT_INT_WMAC_ALL) {
-- /* TODO: flush DDR? */
-+ ath79_ddr_wb_flush(4);
- generic_handle_irq(ATH79_IP2_IRQ(1));
- }
- }
-@@ -130,17 +130,17 @@ static void qca955x_ip3_irq_dispatch(str
- }
-
- if (status & QCA955X_EXT_INT_USB1) {
-- /* TODO: flush DDR? */
-+ ath79_ddr_wb_flush(2);
- generic_handle_irq(ATH79_IP3_IRQ(0));
- }
-
- if (status & QCA955X_EXT_INT_USB2) {
-- /* TODO: flush DDR? */
-+ ath79_ddr_wb_flush(2);
- generic_handle_irq(ATH79_IP3_IRQ(1));
- }
-
- if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) {
-- /* TODO: flush DDR? */
-+ ath79_ddr_wb_flush(3);
- generic_handle_irq(ATH79_IP3_IRQ(2));
- }
- }
diff --git a/target/linux/ar71xx/patches-4.14/953-qca955x-pci-reset-fixes.patch b/target/linux/ar71xx/patches-4.14/953-qca955x-pci-reset-fixes.patch
deleted file mode 100644
index 0acca2a08f..0000000000
--- a/target/linux/ar71xx/patches-4.14/953-qca955x-pci-reset-fixes.patch
+++ /dev/null
@@ -1,120 +0,0 @@
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -153,6 +153,24 @@ void ath79_device_reset_clear(u32 mask)
- }
- EXPORT_SYMBOL_GPL(ath79_device_reset_clear);
-
-+void ath79_device_reset2_clear(u32 mask)
-+{
-+ unsigned long flags;
-+ u32 reg;
-+ u32 t;
-+
-+ if (soc_is_qca955x())
-+ reg = QCA955X_RESET_REG_RESET2_MODULE;
-+ else
-+ panic("Reset register not defined for this SOC");
-+
-+ spin_lock_irqsave(&ath79_device_reset_lock, flags);
-+ t = ath79_reset_rr(reg);
-+ ath79_reset_wr(reg, t & ~mask);
-+ spin_unlock_irqrestore(&ath79_device_reset_lock, flags);
-+}
-+EXPORT_SYMBOL_GPL(ath79_device_reset2_clear);
-+
- u32 ath79_device_reset_get(u32 mask)
- {
- unsigned long flags;
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -411,6 +411,7 @@
- #define QCA955X_PLL_CPU_CONFIG_REG 0x00
- #define QCA955X_PLL_DDR_CONFIG_REG 0x04
- #define QCA955X_PLL_CLK_CTRL_REG 0x08
-+#define QCA955X_PLL_PCIE_CONFIG_REG 0x0c
- #define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
- #define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
- #define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c
-@@ -565,6 +566,7 @@
- #define QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS 0xac
-
- #define QCA955X_RESET_REG_RESET_MODULE 0x1c
-+#define QCA955X_RESET_REG_RESET2_MODULE 0xc4
- #define QCA955X_RESET_REG_BOOTSTRAP 0xb0
- #define QCA955X_RESET_REG_EXT_INT_STATUS 0xac
-
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -178,6 +178,7 @@ static inline u32 ath79_reset_rr(unsigne
-
- void ath79_device_reset_set(u32 mask);
- void ath79_device_reset_clear(u32 mask);
-+void ath79_device_reset2_clear(u32 mask);
- u32 ath79_device_reset_get(u32 mask);
-
- void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3);
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -335,18 +335,37 @@ static void ar724x_pci_hw_init(struct ar
- int wait = 0;
-
- /* deassert PCIe host controller and PCIe PHY reset */
-- ath79_device_reset_clear(AR724X_RESET_PCIE);
-- ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
-+ if (soc_is_qca955x()) {
-+ ath79_device_reset_clear(QCA955X_RESET_PCIE);
-+ mdelay(10);
-+ ath79_device_reset_clear(QCA955X_RESET_PCIE_PHY);
-+ mdelay(10);
-+ ath79_device_reset2_clear(QCA955X_RESET_PCIE);
-+ mdelay(10);
-+ ath79_device_reset2_clear(QCA955X_RESET_PCIE_PHY);
-+ mdelay(10);
-+ } else {
-+ ath79_device_reset_clear(AR724X_RESET_PCIE);
-+ ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
-+ }
-
- /* remove the reset of the PCIE PLL */
-- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
-- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+ if (!soc_is_qca955x()) {
-+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
-+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+ }
-
- /* deassert bypass for the PCIE PLL */
-- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
-- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+ if (soc_is_qca955x()) {
-+ ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG);
-+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
-+ ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl);
-+ } else {
-+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
-+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+ }
-
- /* set PCIE Application Control to ready */
- app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
-@@ -422,8 +441,14 @@ static int ar724x_pci_probe(struct platf
- * Do the full PCIE Root Complex Initialization Sequence if the PCIe
- * host controller is in reset.
- */
-- if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
-- ar724x_pci_hw_init(apc);
-+ if (soc_is_qca955x()) {
-+ if (ath79_reset_rr(QCA955X_RESET_REG_RESET_MODULE) & QCA955X_RESET_PCIE ||
-+ ath79_reset_rr(QCA955X_RESET_REG_RESET2_MODULE) & QCA955X_RESET_PCIE)
-+ ar724x_pci_hw_init(apc);
-+ } else {
-+ if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
-+ ar724x_pci_hw_init(apc);
-+ }
-
- apc->link_up = ar724x_pci_check_link(apc);
- if (!apc->link_up)
diff --git a/target/linux/ar71xx/patches-4.14/955-qca953x-fix-potential-missing-irq-dispatch.patch b/target/linux/ar71xx/patches-4.14/955-qca953x-fix-potential-missing-irq-dispatch.patch
deleted file mode 100644
index 5174029989..0000000000
--- a/target/linux/ar71xx/patches-4.14/955-qca953x-fix-potential-missing-irq-dispatch.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/ath79/irq.c
-+++ b/arch/mips/ath79/irq.c
-@@ -69,15 +69,21 @@ static void qca953x_ip2_irq_dispatch(str
- u32 status;
-
- status = ath79_reset_rr(QCA953X_RESET_REG_PCIE_WMAC_INT_STATUS);
-+ status &= QCA953X_PCIE_WMAC_INT_PCIE_ALL | QCA953X_PCIE_WMAC_INT_WMAC_ALL;
-+
-+ if (status == 0) {
-+ spurious_interrupt();
-+ return;
-+ }
-
- if (status & QCA953X_PCIE_WMAC_INT_PCIE_ALL) {
- ath79_ddr_wb_flush(3);
- generic_handle_irq(ATH79_IP2_IRQ(0));
-- } else if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) {
-+ }
-+
-+ if (status & QCA953X_PCIE_WMAC_INT_WMAC_ALL) {
- ath79_ddr_wb_flush(4);
- generic_handle_irq(ATH79_IP2_IRQ(1));
-- } else {
-- spurious_interrupt();
- }
- }
-
diff --git a/target/linux/ar71xx/tiny/config-default b/target/linux/ar71xx/tiny/config-default
deleted file mode 100644
index 1148d8c451..0000000000
--- a/target/linux/ar71xx/tiny/config-default
+++ /dev/null
@@ -1,76 +0,0 @@
-CONFIG_ATH79_DEV_AP9X_PCI=y
-CONFIG_ATH79_DEV_DSA=y
-CONFIG_ATH79_DEV_ETH=y
-CONFIG_ATH79_DEV_GPIO_BUTTONS=y
-CONFIG_ATH79_DEV_LEDS_GPIO=y
-CONFIG_ATH79_DEV_M25P80=y
-# CONFIG_ATH79_DEV_NFC is not set
-CONFIG_ATH79_DEV_SPI=y
-CONFIG_ATH79_DEV_USB=y
-CONFIG_ATH79_DEV_WMAC=y
-CONFIG_ATH79_MACH_BHR_4GRV2=y
-CONFIG_ATH79_MACH_DIR_600_A1=y
-CONFIG_ATH79_MACH_DIR_615_C1=y
-CONFIG_ATH79_MACH_DIR_615_I1=y
-CONFIG_ATH79_MACH_ENS202EXT=y
-CONFIG_ATH79_MACH_F9K1115V2=y
-CONFIG_ATH79_MACH_NBG460N=y
-CONFIG_ATH79_MACH_TEW_632BRP=y
-CONFIG_ATH79_MACH_TEW_712BR=y
-CONFIG_ATH79_MACH_TL_MR11U=y
-CONFIG_ATH79_MACH_TL_MR13U=y
-CONFIG_ATH79_MACH_TL_MR3020=y
-CONFIG_ATH79_MACH_TL_MR3X20=y
-CONFIG_ATH79_MACH_TL_WA701ND_V2=y
-CONFIG_ATH79_MACH_TL_WA7210N_V2=y
-CONFIG_ATH79_MACH_TL_WA801ND_V3=y
-CONFIG_ATH79_MACH_TL_WA830RE_V2=y
-CONFIG_ATH79_MACH_TL_WA850RE_V2=y
-CONFIG_ATH79_MACH_TL_WA855RE_V1=y
-CONFIG_ATH79_MACH_TL_WA901ND=y
-CONFIG_ATH79_MACH_TL_WA901ND_V2=y
-CONFIG_ATH79_MACH_TL_WA901ND_V4=y
-CONFIG_ATH79_MACH_TL_WAX50RE=y
-CONFIG_ATH79_MACH_TL_WDR3320_V2=y
-CONFIG_ATH79_MACH_TL_WDR3500=y
-CONFIG_ATH79_MACH_TL_WR1041N_V2=y
-CONFIG_ATH79_MACH_TL_WR703N=y
-CONFIG_ATH79_MACH_TL_WR720N_V3=y
-CONFIG_ATH79_MACH_TL_WR741ND=y
-CONFIG_ATH79_MACH_TL_WR741ND_V4=y
-CONFIG_ATH79_MACH_TL_WR802N_V1=y
-CONFIG_ATH79_MACH_TL_WR802N_V2=y
-CONFIG_ATH79_MACH_TL_WR840N_V2=y
-CONFIG_ATH79_MACH_TL_WR841N_V1=y
-CONFIG_ATH79_MACH_TL_WR841N_V8=y
-CONFIG_ATH79_MACH_TL_WR841N_V9=y
-CONFIG_ATH79_MACH_TL_WR940N_V4=y
-CONFIG_ATH79_MACH_TL_WR941ND=y
-CONFIG_ATH79_MACH_TL_WR941ND_V6=y
-CONFIG_ATH79_MACH_WHR_HP_G300N=y
-CONFIG_ATH79_MACH_WLAE_AG300N=y
-CONFIG_ATH79_MACH_WNR2000=y
-CONFIG_ATH79_MACH_WNR2000_V3=y
-CONFIG_ATH79_MACH_WNR2000_V4=y
-CONFIG_ATH79_MACH_WP543=y
-CONFIG_ATH79_MACH_WPE72=y
-CONFIG_ATH79_MACH_ZBT_WE1526=y
-CONFIG_ATH79_NVRAM=y
-CONFIG_ATH79_PCI_ATH9K_FIXUP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_MYLOADER=y
-CONFIG_PCI=y
-CONFIG_PCI_AR724X=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_SERIAL_AR933X=y
-CONFIG_SERIAL_AR933X_CONSOLE=y
-CONFIG_SERIAL_AR933X_NR_UARTS=2
-CONFIG_SOC_AR71XX=y
-CONFIG_SOC_AR724X=y
-CONFIG_SOC_AR913X=y
-CONFIG_SOC_AR933X=y
-CONFIG_SOC_AR934X=y
-CONFIG_SOC_QCA953X=y
-CONFIG_SOC_QCA956X=y
diff --git a/target/linux/ar71xx/tiny/profiles/00-default.mk b/target/linux/ar71xx/tiny/profiles/00-default.mk
deleted file mode 100644
index edddeb3bf6..0000000000
--- a/target/linux/ar71xx/tiny/profiles/00-default.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-define Profile/Default
- NAME:=Default Profile (all drivers)
- PACKAGES:= \
- kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
- PRIORITY := 1
-endef
-
-define Profile/Default/Description
- Default package set compatible with most boards.
-endef
-$(eval $(call Profile,Default))
diff --git a/target/linux/ar71xx/tiny/target.mk b/target/linux/ar71xx/tiny/target.mk
deleted file mode 100644
index 89d4447e1e..0000000000
--- a/target/linux/ar71xx/tiny/target.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-BOARDNAME:=Devices with small flash
-FEATURES += squashfs small_flash
-
-DEFAULT_PACKAGES += wpad-mini
-
-define Target/Description
- Build firmware images for Atheros AR71xx/AR913x/AR934x based boards with small NOR flash.
-endef
-
-