diff options
Diffstat (limited to 'target/linux')
| -rwxr-xr-x | target/linux/ath79/base-files/etc/board.d/02_network | 8 | ||||
| -rw-r--r-- | target/linux/ath79/dts/qca9563_rosinson_wr818.dts | 162 | ||||
| -rw-r--r-- | target/linux/ath79/image/generic.mk | 8 |
3 files changed, 178 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index f471882213..b9d6c709e7 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -111,6 +111,10 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "3:lan:1" "5:lan:2" "4:wan" ;; + rosinson,wr818) + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan" "2:lan" "3:wan" + ;; tplink,archer-c7-v1|\ tplink,archer-c7-v2|\ tplink,tl-wdr4900-v2) @@ -230,6 +234,10 @@ ath79_setup_macs() lan_mac=$(k2t_get_mac "lan_mac") wan_mac=$(k2t_get_mac "wan_mac") ;; + rosinson,wr818) + wan_mac=$(mtd_get_mac_binary factory 0) + lan_mac=$(macaddr_setbit_la "$wan_mac") + ;; tplink,tl-wr1043nd-v4) base_mac=$(mtd_get_mac_binary product-info 8) wan_mac=$(macaddr_add "$base_mac" 1) diff --git a/target/linux/ath79/dts/qca9563_rosinson_wr818.dts b/target/linux/ath79/dts/qca9563_rosinson_wr818.dts new file mode 100644 index 0000000000..ff853cc2cf --- /dev/null +++ b/target/linux/ath79/dts/qca9563_rosinson_wr818.dts @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "qca956x.dtsi" + +/ { + model = "ROSINSON WR818"; + compatible = "rosinson,wr818", "qca,qca9560"; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-boot = &system; + led-failsafe = &system; + led-running = &system; + led-upgrade = &system; + }; + + gpio_leds: leds { + compatible = "gpio-leds"; + + system: system { + label = "wr818:red:system"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + + wifi_2g { + label = "wr818:red:wifi2g"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&spi { + num-cs = <1>; + + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x050000 0xf80000>; + }; + + info: partition@fd0000 { + label = "factory"; + reg = <0xfd0000 0x010000>; + read-only; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "sgmii"; + + qca,ar8327-initvals = < + 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ + 0x7c 0x0000007e /* PORT0_STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&info 0x0>; + phy-mode = "sgmii"; + phy-handle = <&phy0>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb1 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; +}; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 48d477dd9e..2b4556bc76 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -344,6 +344,14 @@ define Device/phicomm_k2t endef TARGET_DEVICES += phicomm_k2t +define Device/rosinson_wr818 + ATH_SOC := qca9563 + DEVICE_TITLE := ROSINSON WR818 + IMAGE_SIZE := 15872k + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport +endef +TARGET_DEVICES += rosinson_wr818 + define Device/wd_mynet-wifi-rangeextender ATH_SOC := ar9344 DEVICE_TITLE := Western Digital My Net Wi-Fi Range Extender |