diff options
Diffstat (limited to 'target/linux')
-rw-r--r-- | target/linux/bcm4908/patches-5.10/038-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch | 2454 |
1 files changed, 2430 insertions, 24 deletions
diff --git a/target/linux/bcm4908/patches-5.10/038-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch b/target/linux/bcm4908/patches-5.10/038-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch index d494c5a728..70484ab93f 100644 --- a/target/linux/bcm4908/patches-5.10/038-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch +++ b/target/linux/bcm4908/patches-5.10/038-v6.1-0005-arm64-dts-Move-BCM4908-dts-to-bcmbca-folder.patch @@ -59,27 +59,2433 @@ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> bcm4912-asus-gt-ax6000.dtb \ bcm94912.dtb \ bcm963158.dtb \ -diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts -similarity index 100% -rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts -rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts -diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts -similarity index 100% -rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts -rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts -diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi -similarity index 100% -rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi -rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi -diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts -similarity index 100% -rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts -rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts -diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts -similarity index 100% -rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts -rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts -diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi -similarity index 100% -rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi -rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts ++++ /dev/null +@@ -1,157 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +- +-#include <dt-bindings/gpio/gpio.h> +-#include <dt-bindings/input/input.h> +-#include <dt-bindings/leds/common.h> +- +-#include "bcm4906.dtsi" +- +-/ { +- compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; +- model = "Netgear R8000P"; +- +- memory@0 { +- device_type = "memory"; +- reg = <0x00 0x00 0x00 0x20000000>; +- }; +- +- leds { +- compatible = "gpio-leds"; +- +- led-power-white { +- function = LED_FUNCTION_POWER; +- color = <LED_COLOR_ID_WHITE>; +- gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; +- }; +- +- led-power-amber { +- function = LED_FUNCTION_POWER; +- color = <LED_COLOR_ID_AMBER>; +- gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; +- }; +- +- led-wps { +- function = LED_FUNCTION_WPS; +- color = <LED_COLOR_ID_WHITE>; +- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; +- }; +- +- led-2ghz { +- function = "2ghz"; +- color = <LED_COLOR_ID_WHITE>; +- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; +- }; +- +- led-5ghz-1 { +- function = "5ghz-1"; +- color = <LED_COLOR_ID_WHITE>; +- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; +- }; +- +- led-5ghz-2 { +- function = "5ghz-2"; +- color = <LED_COLOR_ID_WHITE>; +- gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; +- }; +- +- led-usb2 { +- function = "usb2"; +- color = <LED_COLOR_ID_WHITE>; +- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; +- }; +- +- led-usb3 { +- function = "usb3"; +- color = <LED_COLOR_ID_WHITE>; +- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; +- }; +- +- led-wifi { +- function = "wifi"; +- color = <LED_COLOR_ID_WHITE>; +- gpios = <&gpio0 56 GPIO_ACTIVE_LOW>; +- }; +- }; +-}; +- +-&enet { +- nvmem-cells = <&base_mac_addr>; +- nvmem-cell-names = "mac-address"; +-}; +- +-&usb_phy { +- brcm,ioc = <1>; +- status = "okay"; +-}; +- +-&ehci { +- status = "okay"; +-}; +- +-&ohci { +- status = "okay"; +-}; +- +-&xhci { +- status = "okay"; +-}; +- +-&ports { +- port@0 { +- label = "lan4"; +- }; +- +- port@1 { +- label = "lan3"; +- }; +- +- port@2 { +- label = "lan2"; +- }; +- +- port@3 { +- label = "lan1"; +- }; +- +- port@7 { +- reg = <7>; +- phy-mode = "internal"; +- phy-handle = <&phy12>; +- label = "wan"; +- }; +-}; +- +-&nandcs { +- nand-ecc-strength = <4>; +- nand-ecc-step-size = <512>; +- nand-on-flash-bbt; +- +- #address-cells = <1>; +- #size-cells = <0>; +- +- partitions { +- compatible = "fixed-partitions"; +- #address-cells = <1>; +- #size-cells = <1>; +- +- partition@0 { +- compatible = "nvmem-cells"; +- label = "cferom"; +- reg = <0x0 0x100000>; +- +- #address-cells = <1>; +- #size-cells = <1>; +- ranges = <0 0x0 0x100000>; +- +- base_mac_addr: mac@106a0 { +- reg = <0x106a0 0x6>; +- }; +- }; +- +- partition@100000 { +- compatible = "brcm,bcm4908-firmware"; +- label = "firmware"; +- reg = <0x100000 0x4400000>; +- }; +- }; +-}; +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts ++++ /dev/null +@@ -1,182 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +- +-#include <dt-bindings/gpio/gpio.h> +-#include <dt-bindings/input/input.h> +-#include <dt-bindings/leds/common.h> +- +-#include "bcm4906.dtsi" +- +-/ { +- compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; +- model = "TP-Link Archer C2300 V1"; +- +- memory@0 { +- device_type = "memory"; +- reg = <0x00 0x00 0x00 0x20000000>; +- }; +- +- leds { +- compatible = "gpio-leds"; +- +- led-power { +- function = LED_FUNCTION_POWER; +- color = <LED_COLOR_ID_BLUE>; +- gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; +- }; +- +- led-2ghz { +- function = "2ghz"; +- color = <LED_COLOR_ID_BLUE>; +- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; +- }; +- +- led-5ghz { +- function = "5ghz"; +- color = <LED_COLOR_ID_BLUE>; +- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; +- }; +- +- led-wan-amber { +- function = LED_FUNCTION_WAN; +- color = <LED_COLOR_ID_AMBER>; +- gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; +- }; +- +- led-wan-blue { +- function = LED_FUNCTION_WAN; +- color = <LED_COLOR_ID_BLUE>; +- gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; +- }; +- +- led-lan { +- function = LED_FUNCTION_LAN; +- color = <LED_COLOR_ID_BLUE>; +- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; +- }; +- +- led-wps { +- function = LED_FUNCTION_WPS; +- color = <LED_COLOR_ID_BLUE>; +- gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; +- }; +- +- led-usb2 { +- function = "usb2"; +- color = <LED_COLOR_ID_BLUE>; +- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; +- }; +- +- led-usb3 { +- function = "usbd3"; +- color = <LED_COLOR_ID_BLUE>; +- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; +- }; +- +- led-brightness { +- function = LED_FUNCTION_BACKLIGHT; +- color = <LED_COLOR_ID_WHITE>; +- gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; +- }; +- }; +- +- gpio-keys-polled { +- compatible = "gpio-keys-polled"; +- poll-interval = <100>; +- +- key-brightness { +- label = "LEDs"; +- linux,code = <KEY_BRIGHTNESS_ZERO>; +- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; +- }; +- +- key-wps { +- label = "WPS"; +- linux,code = <KEY_WPS_BUTTON>; +- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; +- }; +- +- key-wifi { +- label = "WiFi"; +- linux,code = <KEY_RFKILL>; +- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; +- }; +- +- key-restart { +- label = "Reset"; +- linux,code = <KEY_RESTART>; +- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; +- }; +- }; +-}; +- +-&usb_phy { +- brcm,ioc = <1>; +- status = "okay"; +-}; +- +-&ehci { +- status = "okay"; +-}; +- +-&ohci { +- status = "okay"; +-}; +- +-&xhci { +- status = "okay"; +-}; +- +-&ports { +- port@0 { +- label = "lan4"; +- }; +- +- port@1 { +- label = "lan3"; +- }; +- +- port@2 { +- label = "lan2"; +- }; +- +- port@3 { +- label = "lan1"; +- }; +- +- port@7 { +- reg = <7>; +- phy-mode = "internal"; +- phy-handle = <&phy12>; +- label = "wan"; +- }; +-}; +- +-&nandcs { +- nand-ecc-strength = <4>; +- nand-ecc-step-size = <512>; +- nand-on-flash-bbt; +- +- #address-cells = <1>; +- #size-cells = <0>; +- +- partitions { +- compatible = "brcm,bcm4908-partitions"; +- #address-cells = <1>; +- #size-cells = <1>; +- +- partition@0 { +- label = "cferom"; +- reg = <0x0 0x100000>; +- }; +- +- partition@100000 { +- compatible = "brcm,bcm4908-firmware"; +- reg = <0x100000 0x3900000>; +- }; +- +- partition@5800000 { +- compatible = "brcm,bcm4908-firmware"; +- reg = <0x3a00000 0x3900000>; +- }; +- }; +-}; +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi ++++ /dev/null +@@ -1,26 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +- +-#include "bcm4908.dtsi" +- +-/ { +- cpus { +- /delete-node/ cpu@2; +- +- /delete-node/ cpu@3; +- }; +- +- timer { +- compatible = "arm,armv8-timer"; +- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, +- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, +- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, +- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +- }; +- +- pmu { +- compatible = "arm,cortex-a53-pmu"; +- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, +- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; +- interrupt-affinity = <&cpu0>, <&cpu1>; +- }; +-}; +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts ++++ /dev/null +@@ -1,207 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +- +-#include <dt-bindings/gpio/gpio.h> +-#include <dt-bindings/input/input.h> +-#include <dt-bindings/leds/common.h> +- +-#include "bcm4908.dtsi" +- +-/ { +- compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca"; +- model = "Asus GT-AC5300"; +- +- memory@0 { +- device_type = "memory"; +- reg = <0x00 0x00 0x00 0x40000000>; +- }; +- +- gpio-keys-polled { +- compatible = "gpio-keys-polled"; +- poll-interval = <100>; +- +- key-wifi { +- label = "WiFi"; +- linux,code = <KEY_RFKILL>; +- gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; +- }; +- +- key-wps { +- label = "WPS"; +- linux,code = <KEY_WPS_BUTTON>; +- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; +- }; +- +- key-restart { +- label = "Reset"; +- linux,code = <KEY_RESTART>; +- gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; +- }; +- +- key-brightness { +- label = "LEDs"; +- linux,code = <KEY_BRIGHTNESS_ZERO>; +- gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; +- }; +- }; +-}; +- +-&enet { +- nvmem-cells = <&base_mac_addr>; +- nvmem-cell-names = "mac-address"; +-}; +- +-&usb_phy { +- brcm,ioc = <1>; +- status = "okay"; +-}; +- +-&ehci { +- status = "okay"; +-}; +- +-&ohci { +- status = "okay"; +-}; +- +-&xhci { +- status = "okay"; +-}; +- +-&ports { +- port@0 { +- label = "lan2"; +- }; +- +- port@1 { +- label = "lan1"; +- }; +- +- port@2 { +- label = "lan6"; +- }; +- +- port@3 { +- label = "lan5"; +- }; +- +- /* External BCM53134S switch */ +- port@7 { +- label = "sw"; +- reg = <7>; +- phy-mode = "rgmii"; +- +- fixed-link { +- speed = <1000>; +- full-duplex; +- }; +- }; +-}; +- +-&mdio { +- /* lan8 */ +- ethernet-phy@0 { +- reg = <0>; +- }; +- +- /* lan7 */ +- ethernet-phy@1 { +- reg = <1>; +- }; +- +- /* lan4 */ +- ethernet-phy@2 { +- reg = <2>; +- }; +- +- /* lan3 */ +- ethernet-phy@3 { +- reg = <3>; +- }; +-}; +- +-&leds { +- led-power@11 { +- reg = <0x11>; +- function = LED_FUNCTION_POWER; +- color = <LED_COLOR_ID_WHITE>; +- default-state = "on"; +- active-low; +- pinctrl-names = "default"; +- pinctrl-0 = <&pins_led_17_a>; +- }; +- +- led-wan-red@12 { +- reg = <0x12>; +- function = LED_FUNCTION_WAN; +- color = <LED_COLOR_ID_RED>; +- active-low; +- pinctrl-names = "default"; +- pinctrl-0 = <&pins_led_18_a>; +- }; +- +- led-wps@14 { +- reg = <0x14>; +- function = LED_FUNCTION_WPS; +- color = <LED_COLOR_ID_WHITE>; +- active-low; +- pinctrl-names = "default"; +- pinctrl-0 = <&pins_led_20_a>; +- }; +- +- led-wan-white@15 { +- reg = <0x15>; +- function = LED_FUNCTION_WAN; +- color = <LED_COLOR_ID_WHITE>; +- active-low; +- pinctrl-names = "default"; +- pinctrl-0 = <&pins_led_21_a>; +- }; +- +- led-lan@19 { +- reg = <0x19>; +- function = LED_FUNCTION_LAN; +- color = <LED_COLOR_ID_WHITE>; +- pinctrl-names = "default"; +- pinctrl-0 = <&pins_led_25_a>; +- }; +-}; +- +-&nandcs { +- nand-ecc-strength = <4>; +- nand-ecc-step-size = <512>; +- nand-on-flash-bbt; +- brcm,nand-has-wp; +- +- #address-cells = <1>; +- #size-cells = <0>; +- +- partitions { +- compatible = "brcm,bcm4908-partitions"; +- #address-cells = <1>; +- #size-cells = <1>; +- +- partition@0 { +- compatible = "nvmem-cells"; +- label = "cferom"; +- reg = <0x0 0x100000>; +- +- #address-cells = <1>; +- #size-cells = <1>; +- ranges = <0 0x0 0x100000>; +- +- base_mac_addr: mac@106a0 { +- reg = <0x106a0 0x6>; +- }; +- }; +- +- partition@100000 { +- compatible = "brcm,bcm4908-firmware"; +- reg = <0x100000 0x5700000>; +- }; +- +- partition@5800000 { +- compatible = "brcm,bcm4908-firmware"; +- reg = <0x5800000 0x5700000>; +- }; +- }; +-}; +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts ++++ /dev/null +@@ -1,50 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +- +-#include "bcm4908.dtsi" +- +-/ { +- compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca"; +- model = "Netgear RAXE500"; +- +- memory@0 { +- device_type = "memory"; +- reg = <0x00 0x00 0x00 0x40000000>; +- }; +-}; +- +-&ehci { +- status = "okay"; +-}; +- +-&ohci { +- status = "okay"; +-}; +- +-&xhci { +- status = "okay"; +-}; +- +-&ports { +- port@0 { +- label = "lan4"; +- }; +- +- port@1 { +- label = "lan3"; +- }; +- +- port@2 { +- label = "lan2"; +- }; +- +- port@3 { +- label = "lan1"; +- }; +- +- port@7 { +- reg = <7>; +- phy-mode = "internal"; +- phy-handle = <&phy12>; +- label = "wan"; +- }; +-}; +--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi ++++ /dev/null +@@ -1,575 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +- +-#include <dt-bindings/interrupt-controller/irq.h> +-#include <dt-bindings/interrupt-controller/arm-gic.h> +-#include <dt-bindings/phy/phy.h> +-#include <dt-bindings/soc/bcm-pmb.h> +- +-/dts-v1/; +- +-/ { +- interrupt-parent = <&gic>; +- +- #address-cells = <2>; +- #size-cells = <2>; +- +- aliases { +- serial0 = &uart0; +- }; +- +- chosen { +- stdout-path = "serial0:115200n8"; +- }; +- +- cpus { +- #address-cells = <1>; +- #size-cells = <0>; +- +- cpu0: cpu@0 { +- device_type = "cpu"; +- compatible = "brcm,brahma-b53"; +- reg = <0x0>; +- enable-method = "spin-table"; +- cpu-release-addr = <0x0 0xfff8>; +- next-level-cache = <&l2>; +- }; +- +- cpu1: cpu@1 { +- device_type = "cpu"; +- compatible = "brcm,brahma-b53"; +- reg = <0x1>; +- enable-method = "spin-table"; +- cpu-release-addr = <0x0 0xfff8>; +- next-level-cache = <&l2>; +- }; +- +- cpu2: cpu@2 { +- device_type = "cpu"; +- compatible = "brcm,brahma-b53"; +- reg = <0x2>; +- enable-method = "spin-table"; +- cpu-release-addr = <0x0 0xfff8>; +- next-level-cache = <&l2>; +- }; +- +- cpu3: cpu@3 { +- device_type = "cpu"; +- compatible = "brcm,brahma-b53"; +- reg = <0x3>; +- enable-method = "spin-table"; +- cpu-release-addr = <0x0 0xfff8>; +- next-level-cache = <&l2>; +- }; +- +- l2: l2-cache0 { +- compatible = "cache"; +- }; +- }; +- +- axi@81000000 { +- compatible = "simple-bus"; +- #address-cells = <1>; +- #size-cells = <1>; +- ranges = <0x00 0x00 0x81000000 0x4000>; +- +- gic: interrupt-controller@1000 { +- compatible = "arm,gic-400"; +- #interrupt-cells = <3>; +- #address-cells = <0>; +- interrupt-controller; +- reg = <0x1000 0x1000>, +- <0x2000 0x2000>; +- }; +- }; +- +- timer { +- compatible = "arm,armv8-timer"; +- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, +- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, +- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, +- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; +- }; +- +- pmu { +- compatible = "arm,cortex-a53-pmu"; +- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, +- <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, +- <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, +- <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; +- interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; +- }; +- +- clocks { +- periph_clk: periph_clk { +- compatible = "fixed-clock"; +- #clock-cells = <0>; +- clock-frequency = <50000000>; +- clock-output-names = "periph"; +- }; +- }; +- +- soc { +- compatible = "simple-bus"; +- #address-cells = <1>; +- #size-cells = <1>; +- ranges = <0x00 0x00 0x80000000 0x281000>; +- +- enet: ethernet@2000 { +- compatible = "brcm,bcm4908-enet"; +- reg = <0x2000 0x1000>; +- +- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, +- <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; +- interrupt-names = "rx", "tx"; +- }; +- +- usb_phy: usb-phy@c200 { +- compatible = "brcm,bcm4908-usb-phy"; +- reg = <0xc200 0x100>; +- reg-names = "ctrl"; +- power-domains = <&pmb BCM_PMB_HOST_USB>; +- dr_mode = "host"; +- brcm,has-xhci; +- brcm,has-eohci; +- #phy-cells = <1>; +- status = "disabled"; +- }; +- +- ehci: usb@c300 { +- compatible = "generic-ehci"; +- reg = <0xc300 0x100>; +- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; +- phys = <&usb_phy PHY_TYPE_USB2>; +- status = "disabled"; +- }; +- +- ohci: usb@c400 { +- compatible = "generic-ohci"; +- reg = <0xc400 0x100>; +- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; +- phys = <&usb_phy PHY_TYPE_USB2>; +- status = "disabled"; +- }; +- +- xhci: usb@d000 { +- compatible = "generic-xhci"; +- reg = <0xd000 0x8c8>; +- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; +- phys = <&usb_phy PHY_TYPE_USB3>; +- status = "disabled"; +- }; +- +- bus@80000 { +- compatible = "simple-bus"; +- #size-cells = <1>; +- #address-cells = <1>; +- ranges = <0 0x80000 0x50000>; +- +- ethernet-switch@0 { +- compatible = "brcm,bcm4908-switch"; +- reg = <0x0 0x40000>, +- <0x40000 0x110>, +- <0x40340 0x30>, +- <0x40380 0x30>, +- <0x40600 0x34>, +- <0x40800 0x208>; +- reg-names = "core", "reg", "intrl2_0", +- "intrl2_1", "fcb", "acb"; +- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, +- <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; +- brcm,num-gphy = <5>; +- brcm,num-rgmii-ports = <2>; +- +- #address-cells = <1>; +- #size-cells = <0>; +- +- ports: ports { +- #address-cells = <1>; +- #size-cells = <0>; +- +- port@0 { +- reg = <0>; +- phy-mode = "internal"; +- phy-handle = <&phy8>; +- }; +- +- port@1 { +- reg = <1>; +- phy-mode = "internal"; +- phy-handle = <&phy9>; +- }; +- +- port@2 { +- reg = <2>; +- phy-mode = "internal"; +- phy-handle = <&phy10>; +- }; +- +- port@3 { +- reg = <3>; +- phy-mode = "internal"; +- phy-handle = <&phy11>; +- }; +- +- port@8 { +- reg = <8>; +- phy-mode = "internal"; +- ethernet = <&enet>; +- +- fixed-link { +- speed = <1000>; +- full-duplex; +- }; +- }; +- }; +- }; +- +- mdio: mdio@405c0 { +- compatible = "brcm,unimac-mdio"; +- reg = <0x405c0 0x8>; +- reg-names = "mdio"; +- #size-cells = <0>; +- #address-cells = <1>; +- +- phy8: ethernet-phy@8 { +- reg = <8>; +- }; +- +- phy9: ethernet-phy@9 { +- reg = <9>; +- }; +- +- phy10: ethernet-phy@a { +- reg = <10>; +- }; +- +- phy11: ethernet-phy@b { +- reg = <11>; +- }; +- +- phy12: ethernet-phy@c { +- reg = <12>; +- }; +- }; +- }; +- +- procmon: syscon@280000 { +- compatible = "simple-bus"; +- reg = <0x280000 0x1000>; +- ranges; +- +- #address-cells = <1>; +- #size-cells = <1>; +- +- pmb: power-controller@2800c0 { +- compatible = "brcm,bcm4908-pmb"; +- reg = <0x2800c0 0x40>; +- #power-domain-cells = <1>; +- }; +- }; +- }; +- +- bus@ff800000 { +- compatible = "simple-bus"; +- #address-cells = <1>; +- #size-cells = <1>; +- ranges = <0x00 0x00 0xff800000 0x3000>; +- +- twd: timer-mfd@400 { +- compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; +- reg = <0x400 0x4c>; +- ranges = <0x0 0x400 0x4c>; +- +- #address-cells = <1>; +- #size-cells = <1>; +- +- watchdog@28 { +- compatible = "brcm,bcm6345-wdt"; +- reg = <0x28 0x8>; +- }; +- }; +- +- gpio0: gpio-controller@500 { +- compatible = "brcm,bcm6345-gpio"; +- reg-names = "dirout", "dat"; +- reg = <0x500 0x28>, <0x528 0x28>; +- +- #gpio-cells = <2>; +- gpio-controller; +- }; +- +- pinctrl@560 { +- compatible = "brcm,bcm4908-pinctrl"; +- reg = <0x560 0x10>; +- +- pins_led_0_a: led_0-a-pins { +- function = "led_0"; +- groups = "led_0_grp_a"; +- }; +- +- pins_led_1_a: led_1-a-pins { +- function = "led_1"; +- groups = "led_1_grp_a"; +- }; +- +- pins_led_2_a: led_2-a-pins { +- function = "led_2"; +- groups = "led_2_grp_a"; +- }; +- +- pins_led_3_a: led_3-a-pins { +- function = "led_3"; +- groups = "led_3_grp_a"; +- }; +- +- pins_led_4_a: led_4-a-pins { +- function = "led_4"; +- groups = "led_4_grp_a"; +- }; +- +- pins_led_5_a: led_5-a-pins { +- function = "led_5"; +- groups = "led_5_grp_a"; +- }; +- +- pins_led_6_a: led_6-a-pins { +- function = "led_6"; +- groups = "led_6_grp_a"; +- }; +- +- pins_led_7_a: led_7-a-pins { +- function = "led_7"; +- groups = "led_7_grp_a"; +- }; +- +- pins_led_8_a: led_8-a-pins { +- function = "led_8"; +- groups = "led_8_grp_a"; +- }; +- +- pins_led_9_a: led_9-a-pins { +- function = "led_9"; +- groups = "led_9_grp_a"; +- }; +- +- pins_led_10_a: led_10-a-pins { +- function = "led_10"; +- groups = "led_10_grp_a"; +- }; +- +- pins_led_11_a: led_11-a-pins { +- function = "led_11"; +- groups = "led_11_grp_a"; +- }; +- +- pins_led_12_a: led_12-a-pins { +- function = "led_12"; +- groups = "led_12_grp_a"; +- }; +- +- pins_led_13_a: led_13-a-pins { +- function = "led_13"; +- groups = "led_13_grp_a"; +- }; +- +- pins_led_14_a: led_14-a-pins { +- function = "led_14"; +- groups = "led_14_grp_a"; +- }; +- +- pins_led_15_a: led_15-a-pins { +- function = "led_15"; +- groups = "led_15_grp_a"; +- }; +- +- pins_led_16_a: led_16-a-pins { +- function = "led_16"; +- groups = "led_16_grp_a"; +- }; +- +- pins_led_17_a: led_17-a-pins { +- function = "led_17"; +- groups = "led_17_grp_a"; +- }; +- +- pins_led_18_a: led_18-a-pins { +- function = "led_18"; +- groups = "led_18_grp_a"; +- }; +- +- pins_led_19_a: led_19-a-pins { +- function = "led_19"; +- groups = "led_19_grp_a"; +- }; +- +- pins_led_20_a: led_20-a-pins { +- function = "led_20"; +- groups = "led_20_grp_a"; +- }; +- +- pins_led_21_a: led_21-a-pins { +- function = "led_21"; +- groups = "led_21_grp_a"; +- }; +- +- pins_led_22_a: led_22-a-pins { +- function = "led_22"; +- groups = "led_22_grp_a"; +- }; +- +- pins_led_23_a: led_23-a-pins { +- function = "led_23"; +- groups = "led_23_grp_a"; +- }; +- +- pins_led_24_a: led_24-a-pins { +- function = "led_24"; +- groups = "led_24_grp_a"; +- }; +- +- pins_led_25_a: led_25-a-pins { +- function = "led_25"; +- groups = "led_25_grp_a"; +- }; +- +- pins_led_26_a: led_26-a-pins { +- function = "led_26"; +- groups = "led_26_grp_a"; +- }; +- +- pins_led_27_a: led_27-a-pins { +- function = "led_27"; +- groups = "led_27_grp_a"; +- }; +- +- pins_led_28_a: led_28-a-pins { +- function = "led_28"; +- groups = "led_28_grp_a"; +- }; +- +- pins_led_29_a: led_29-a-pins { +- function = "led_29"; +- groups = "led_29_grp_a"; +- }; +- +- pins_led_30_a: led_30-a-pins { +- function = "led_30"; +- groups = "led_30_grp_a"; +- }; +- +- pins_led_31_a: led_31-a-pins { +- function = "led_31"; +- groups = "led_31_grp_a"; +- }; +- +- pins_hs_uart: hs_uart-pins { +- function = "hs_uart"; +- groups = "hs_uart_grp"; +- }; +- +- pins_i2c_a: i2c-a-pins { +- function = "i2c"; +- groups = "i2c_grp_a"; +- }; +- +- pins_i2c_b: i2c-b-pins { +- function = "i2c"; +- groups = "i2c_grp_b"; +- }; +- +- pins_i2s: i2s-pins { +- function = "i2s"; +- groups = "i2s_grp"; +- }; +- +- pins_nand_ctrl: nand_ctrl-pins { +- function = "nand_ctrl"; +- groups = "nand_ctrl_grp"; +- }; +- +- pins_nand_data: nand_data-pins { +- function = "nand_data"; +- groups = "nand_data_grp"; +- }; +- +- pins_emmc_ctrl: emmc_ctrl-pins { +- function = "emmc_ctrl"; +- groups = "emmc_ctrl_grp"; +- }; +- +- pins_usb0_pwr: usb0_pwr-pins { +- function = "usb0_pwr"; +- groups = "usb0_pwr_grp"; +- }; +- +- pins_usb1_pwr: usb1_pwr-pins { +- function = "usb1_pwr"; +- groups = "usb1_pwr_grp"; +- }; +- }; +- +- uart0: serial@640 { +- compatible = "brcm,bcm6345-uart"; +- reg = <0x640 0x18>; +- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; +- clocks = <&periph_clk>; +- clock-names = "refclk"; +- status = "okay"; +- }; +- +- leds: leds@800 { +- compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds"; +- reg = <0x800 0xdc>; +- +- #address-cells = <1>; +- #size-cells = <0>; +- }; +- +- nand-controller@1800 { +- #address-cells = <1>; +- #size-cells = <0>; +- compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; +- reg = <0x1800 0x600>, <0x2000 0x10>; +- reg-names = "nand", "nand-int-base"; +- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; +- interrupt-names = "nand"; +- status = "okay"; +- +- nandcs: nand@0 { +- compatible = "brcm,nandcs"; +- reg = <0>; +- }; +- }; +- +- i2c@2100 { +- compatible = "brcm,brcmper-i2c"; +- reg = <0x2100 0x58>; +- clock-frequency = <97500>; +- pinctrl-names = "default"; +- pinctrl-0 = <&pins_i2c_a>; +- status = "disabled"; +- }; +- +- misc@2600 { +- compatible = "brcm,misc", "simple-mfd"; +- reg = <0x2600 0xe4>; +- +- #address-cells = <1>; +- #size-cells = <1>; +- ranges = <0x00 0x2600 0xe4>; +- +- reset-controller@2644 { +- compatible = "brcm,bcm4908-misc-pcie-reset"; +- reg = <0x44 0x04>; +- #reset-cells = <1>; +- }; +- }; +- }; +- +- reboot { +- compatible = "syscon-reboot"; +- regmap = <&twd>; +- offset = <0x34>; +- mask = <1>; +- }; +-}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts +@@ -0,0 +1,157 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include <dt-bindings/gpio/gpio.h> ++#include <dt-bindings/input/input.h> ++#include <dt-bindings/leds/common.h> ++ ++#include "bcm4906.dtsi" ++ ++/ { ++ compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; ++ model = "Netgear R8000P"; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x00 0x00 0x00 0x20000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led-power-white { ++ function = LED_FUNCTION_POWER; ++ color = <LED_COLOR_ID_WHITE>; ++ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-power-amber { ++ function = LED_FUNCTION_POWER; ++ color = <LED_COLOR_ID_AMBER>; ++ gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-wps { ++ function = LED_FUNCTION_WPS; ++ color = <LED_COLOR_ID_WHITE>; ++ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-2ghz { ++ function = "2ghz"; ++ color = <LED_COLOR_ID_WHITE>; ++ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-5ghz-1 { ++ function = "5ghz-1"; ++ color = <LED_COLOR_ID_WHITE>; ++ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-5ghz-2 { ++ function = "5ghz-2"; ++ color = <LED_COLOR_ID_WHITE>; ++ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-usb2 { ++ function = "usb2"; ++ color = <LED_COLOR_ID_WHITE>; ++ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-usb3 { ++ function = "usb3"; ++ color = <LED_COLOR_ID_WHITE>; ++ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-wifi { ++ function = "wifi"; ++ color = <LED_COLOR_ID_WHITE>; ++ gpios = <&gpio0 56 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&enet { ++ nvmem-cells = <&base_mac_addr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ ++&usb_phy { ++ brcm,ioc = <1>; ++ status = "okay"; ++}; ++ ++&ehci { ++ status = "okay"; ++}; ++ ++&ohci { ++ status = "okay"; ++}; ++ ++&xhci { ++ status = "okay"; ++}; ++ ++&ports { ++ port@0 { ++ label = "lan4"; ++ }; ++ ++ port@1 { ++ label = "lan3"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan1"; ++ }; ++ ++ port@7 { ++ reg = <7>; ++ phy-mode = "internal"; ++ phy-handle = <&phy12>; ++ label = "wan"; ++ }; ++}; ++ ++&nandcs { ++ nand-ecc-strength = <4>; ++ nand-ecc-step-size = <512>; ++ nand-on-flash-bbt; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ compatible = "nvmem-cells"; ++ label = "cferom"; ++ reg = <0x0 0x100000>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0 0x0 0x100000>; ++ ++ base_mac_addr: mac@106a0 { ++ reg = <0x106a0 0x6>; ++ }; ++ }; ++ ++ partition@100000 { ++ compatible = "brcm,bcm4908-firmware"; ++ label = "firmware"; ++ reg = <0x100000 0x4400000>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts +@@ -0,0 +1,182 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include <dt-bindings/gpio/gpio.h> ++#include <dt-bindings/input/input.h> ++#include <dt-bindings/leds/common.h> ++ ++#include "bcm4906.dtsi" ++ ++/ { ++ compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca"; ++ model = "TP-Link Archer C2300 V1"; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x00 0x00 0x00 0x20000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led-power { ++ function = LED_FUNCTION_POWER; ++ color = <LED_COLOR_ID_BLUE>; ++ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-2ghz { ++ function = "2ghz"; ++ color = <LED_COLOR_ID_BLUE>; ++ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-5ghz { ++ function = "5ghz"; ++ color = <LED_COLOR_ID_BLUE>; ++ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-wan-amber { ++ function = LED_FUNCTION_WAN; ++ color = <LED_COLOR_ID_AMBER>; ++ gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ led-wan-blue { ++ function = LED_FUNCTION_WAN; ++ color = <LED_COLOR_ID_BLUE>; ++ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-lan { ++ function = LED_FUNCTION_LAN; ++ color = <LED_COLOR_ID_BLUE>; ++ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-wps { ++ function = LED_FUNCTION_WPS; ++ color = <LED_COLOR_ID_BLUE>; ++ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-usb2 { ++ function = "usb2"; ++ color = <LED_COLOR_ID_BLUE>; ++ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-usb3 { ++ function = "usbd3"; ++ color = <LED_COLOR_ID_BLUE>; ++ gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; ++ }; ++ ++ led-brightness { ++ function = LED_FUNCTION_BACKLIGHT; ++ color = <LED_COLOR_ID_WHITE>; ++ gpios = <&gpio0 19 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++ ++ gpio-keys-polled { ++ compatible = "gpio-keys-polled"; ++ poll-interval = <100>; ++ ++ key-brightness { ++ label = "LEDs"; ++ linux,code = <KEY_BRIGHTNESS_ZERO>; ++ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; ++ }; ++ ++ key-wps { ++ label = "WPS"; ++ linux,code = <KEY_WPS_BUTTON>; ++ gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; ++ }; ++ ++ key-wifi { ++ label = "WiFi"; ++ linux,code = <KEY_RFKILL>; ++ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; ++ }; ++ ++ key-restart { ++ label = "Reset"; ++ linux,code = <KEY_RESTART>; ++ gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&usb_phy { ++ brcm,ioc = <1>; ++ status = "okay"; ++}; ++ ++&ehci { ++ status = "okay"; ++}; ++ ++&ohci { ++ status = "okay"; ++}; ++ ++&xhci { ++ status = "okay"; ++}; ++ ++&ports { ++ port@0 { ++ label = "lan4"; ++ }; ++ ++ port@1 { ++ label = "lan3"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan1"; ++ }; ++ ++ port@7 { ++ reg = <7>; ++ phy-mode = "internal"; ++ phy-handle = <&phy12>; ++ label = "wan"; ++ }; ++}; ++ ++&nandcs { ++ nand-ecc-strength = <4>; ++ nand-ecc-step-size = <512>; ++ nand-on-flash-bbt; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ partitions { ++ compatible = "brcm,bcm4908-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "cferom"; ++ reg = <0x0 0x100000>; ++ }; ++ ++ partition@100000 { ++ compatible = "brcm,bcm4908-firmware"; ++ reg = <0x100000 0x3900000>; ++ }; ++ ++ partition@5800000 { ++ compatible = "brcm,bcm4908-firmware"; ++ reg = <0x3a00000 0x3900000>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi +@@ -0,0 +1,26 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include "bcm4908.dtsi" ++ ++/ { ++ cpus { ++ /delete-node/ cpu@2; ++ ++ /delete-node/ cpu@3; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, ++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, ++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, ++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; ++ }; ++ ++ pmu { ++ compatible = "arm,cortex-a53-pmu"; ++ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, ++ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; ++ interrupt-affinity = <&cpu0>, <&cpu1>; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts +@@ -0,0 +1,207 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include <dt-bindings/gpio/gpio.h> ++#include <dt-bindings/input/input.h> ++#include <dt-bindings/leds/common.h> ++ ++#include "bcm4908.dtsi" ++ ++/ { ++ compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca"; ++ model = "Asus GT-AC5300"; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x00 0x00 0x00 0x40000000>; ++ }; ++ ++ gpio-keys-polled { ++ compatible = "gpio-keys-polled"; ++ poll-interval = <100>; ++ ++ key-wifi { ++ label = "WiFi"; ++ linux,code = <KEY_RFKILL>; ++ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; ++ }; ++ ++ key-wps { ++ label = "WPS"; ++ linux,code = <KEY_WPS_BUTTON>; ++ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; ++ }; ++ ++ key-restart { ++ label = "Reset"; ++ linux,code = <KEY_RESTART>; ++ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; ++ }; ++ ++ key-brightness { ++ label = "LEDs"; ++ linux,code = <KEY_BRIGHTNESS_ZERO>; ++ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&enet { ++ nvmem-cells = <&base_mac_addr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ ++&usb_phy { ++ brcm,ioc = <1>; ++ status = "okay"; ++}; ++ ++&ehci { ++ status = "okay"; ++}; ++ ++&ohci { ++ status = "okay"; ++}; ++ ++&xhci { ++ status = "okay"; ++}; ++ ++&ports { ++ port@0 { ++ label = "lan2"; ++ }; ++ ++ port@1 { ++ label = "lan1"; ++ }; ++ ++ port@2 { ++ label = "lan6"; ++ }; ++ ++ port@3 { ++ label = "lan5"; ++ }; ++ ++ /* External BCM53134S switch */ ++ port@7 { ++ label = "sw"; ++ reg = <7>; ++ phy-mode = "rgmii"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++}; ++ ++&mdio { ++ /* lan8 */ ++ ethernet-phy@0 { ++ reg = <0>; ++ }; ++ ++ /* lan7 */ ++ ethernet-phy@1 { ++ reg = <1>; ++ }; ++ ++ /* lan4 */ ++ ethernet-phy@2 { ++ reg = <2>; ++ }; ++ ++ /* lan3 */ ++ ethernet-phy@3 { ++ reg = <3>; ++ }; ++}; ++ ++&leds { ++ led-power@11 { ++ reg = <0x11>; ++ function = LED_FUNCTION_POWER; ++ color = <LED_COLOR_ID_WHITE>; ++ default-state = "on"; ++ active-low; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_17_a>; ++ }; ++ ++ led-wan-red@12 { ++ reg = <0x12>; ++ function = LED_FUNCTION_WAN; ++ color = <LED_COLOR_ID_RED>; ++ active-low; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_18_a>; ++ }; ++ ++ led-wps@14 { ++ reg = <0x14>; ++ function = LED_FUNCTION_WPS; ++ color = <LED_COLOR_ID_WHITE>; ++ active-low; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_20_a>; ++ }; ++ ++ led-wan-white@15 { ++ reg = <0x15>; ++ function = LED_FUNCTION_WAN; ++ color = <LED_COLOR_ID_WHITE>; ++ active-low; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_21_a>; ++ }; ++ ++ led-lan@19 { ++ reg = <0x19>; ++ function = LED_FUNCTION_LAN; ++ color = <LED_COLOR_ID_WHITE>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_led_25_a>; ++ }; ++}; ++ ++&nandcs { ++ nand-ecc-strength = <4>; ++ nand-ecc-step-size = <512>; ++ nand-on-flash-bbt; ++ brcm,nand-has-wp; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ partitions { ++ compatible = "brcm,bcm4908-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ compatible = "nvmem-cells"; ++ label = "cferom"; ++ reg = <0x0 0x100000>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0 0x0 0x100000>; ++ ++ base_mac_addr: mac@106a0 { ++ reg = <0x106a0 0x6>; ++ }; ++ }; ++ ++ partition@100000 { ++ compatible = "brcm,bcm4908-firmware"; ++ reg = <0x100000 0x5700000>; ++ }; ++ ++ partition@5800000 { ++ compatible = "brcm,bcm4908-firmware"; ++ reg = <0x5800000 0x5700000>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts +@@ -0,0 +1,50 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include "bcm4908.dtsi" ++ ++/ { ++ compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca"; ++ model = "Netgear RAXE500"; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x00 0x00 0x00 0x40000000>; ++ }; ++}; ++ ++&ehci { ++ status = "okay"; ++}; ++ ++&ohci { ++ status = "okay"; ++}; ++ ++&xhci { ++ status = "okay"; ++}; ++ ++&ports { ++ port@0 { ++ label = "lan4"; ++ }; ++ ++ port@1 { ++ label = "lan3"; ++ }; ++ ++ port@2 { ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ label = "lan1"; ++ }; ++ ++ port@7 { ++ reg = <7>; ++ phy-mode = "internal"; ++ phy-handle = <&phy12>; ++ label = "wan"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi +@@ -0,0 +1,575 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include <dt-bindings/interrupt-controller/irq.h> ++#include <dt-bindings/interrupt-controller/arm-gic.h> ++#include <dt-bindings/phy/phy.h> ++#include <dt-bindings/soc/bcm-pmb.h> ++ ++/dts-v1/; ++ ++/ { ++ interrupt-parent = <&gic>; ++ ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ aliases { ++ serial0 = &uart0; ++ }; ++ ++ chosen { ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "brcm,brahma-b53"; ++ reg = <0x0>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0xfff8>; ++ next-level-cache = <&l2>; ++ }; ++ ++ cpu1: cpu@1 { ++ device_type = "cpu"; ++ compatible = "brcm,brahma-b53"; ++ reg = <0x1>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0xfff8>; ++ next-level-cache = <&l2>; ++ }; ++ ++ cpu2: cpu@2 { ++ device_type = "cpu"; ++ compatible = "brcm,brahma-b53"; ++ reg = <0x2>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0xfff8>; ++ next-level-cache = <&l2>; ++ }; ++ ++ cpu3: cpu@3 { ++ device_type = "cpu"; ++ compatible = "brcm,brahma-b53"; ++ reg = <0x3>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0xfff8>; ++ next-level-cache = <&l2>; ++ }; ++ ++ l2: l2-cache0 { ++ compatible = "cache"; ++ }; ++ }; ++ ++ axi@81000000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x00 0x00 0x81000000 0x4000>; ++ ++ gic: interrupt-controller@1000 { ++ compatible = "arm,gic-400"; ++ #interrupt-cells = <3>; ++ #address-cells = <0>; ++ interrupt-controller; ++ reg = <0x1000 0x1000>, ++ <0x2000 0x2000>; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, ++ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, ++ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, ++ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; ++ }; ++ ++ pmu { ++ compatible = "arm,cortex-a53-pmu"; ++ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, ++ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, ++ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, ++ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; ++ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; ++ }; ++ ++ clocks { ++ periph_clk: periph_clk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <50000000>; ++ clock-output-names = "periph"; ++ }; ++ }; ++ ++ soc { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x00 0x00 0x80000000 0x281000>; ++ ++ enet: ethernet@2000 { ++ compatible = "brcm,bcm4908-enet"; ++ reg = <0x2000 0x1000>; ++ ++ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, ++ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; ++ interrupt-names = "rx", "tx"; ++ }; ++ ++ usb_phy: usb-phy@c200 { ++ compatible = "brcm,bcm4908-usb-phy"; ++ reg = <0xc200 0x100>; ++ reg-names = "ctrl"; ++ power-domains = <&pmb BCM_PMB_HOST_USB>; ++ dr_mode = "host"; ++ brcm,has-xhci; ++ brcm,has-eohci; ++ #phy-cells = <1>; ++ status = "disabled"; ++ }; ++ ++ ehci: usb@c300 { ++ compatible = "generic-ehci"; ++ reg = <0xc300 0x100>; ++ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ++ phys = <&usb_phy PHY_TYPE_USB2>; ++ status = "disabled"; ++ }; ++ ++ ohci: usb@c400 { ++ compatible = "generic-ohci"; ++ reg = <0xc400 0x100>; ++ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; ++ phys = <&usb_phy PHY_TYPE_USB2>; ++ status = "disabled"; ++ }; ++ ++ xhci: usb@d000 { ++ compatible = "generic-xhci"; ++ reg = <0xd000 0x8c8>; ++ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ++ phys = <&usb_phy PHY_TYPE_USB3>; ++ status = "disabled"; ++ }; ++ ++ bus@80000 { ++ compatible = "simple-bus"; ++ #size-cells = <1>; ++ #address-cells = <1>; ++ ranges = <0 0x80000 0x50000>; ++ ++ ethernet-switch@0 { ++ compatible = "brcm,bcm4908-switch"; ++ reg = <0x0 0x40000>, ++ <0x40000 0x110>, ++ <0x40340 0x30>, ++ <0x40380 0x30>, ++ <0x40600 0x34>, ++ <0x40800 0x208>; ++ reg-names = "core", "reg", "intrl2_0", ++ "intrl2_1", "fcb", "acb"; ++ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, ++ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; ++ brcm,num-gphy = <5>; ++ brcm,num-rgmii-ports = <2>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ports: ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ phy-mode = "internal"; ++ phy-handle = <&phy8>; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ phy-mode = "internal"; ++ phy-handle = <&phy9>; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ phy-mode = "internal"; ++ phy-handle = <&phy10>; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ phy-mode = "internal"; ++ phy-handle = <&phy11>; ++ }; ++ ++ port@8 { ++ reg = <8>; ++ phy-mode = "internal"; ++ ethernet = <&enet>; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ }; ++ }; ++ ++ mdio: mdio@405c0 { ++ compatible = "brcm,unimac-mdio"; ++ reg = <0x405c0 0x8>; ++ reg-names = "mdio"; ++ #size-cells = <0>; ++ #address-cells = <1>; ++ ++ phy8: ethernet-phy@8 { ++ reg = <8>; ++ }; ++ ++ phy9: ethernet-phy@9 { ++ reg = <9>; ++ }; ++ ++ phy10: ethernet-phy@a { ++ reg = <10>; ++ }; ++ ++ phy11: ethernet-phy@b { ++ reg = <11>; ++ }; ++ ++ phy12: ethernet-phy@c { ++ reg = <12>; ++ }; ++ }; ++ }; ++ ++ procmon: syscon@280000 { ++ compatible = "simple-bus"; ++ reg = <0x280000 0x1000>; ++ ranges; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ pmb: power-controller@2800c0 { ++ compatible = "brcm,bcm4908-pmb"; ++ reg = <0x2800c0 0x40>; ++ #power-domain-cells = <1>; ++ }; ++ }; ++ }; ++ ++ bus@ff800000 { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x00 0x00 0xff800000 0x3000>; ++ ++ twd: timer-mfd@400 { ++ compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon"; ++ reg = <0x400 0x4c>; ++ ranges = <0x0 0x400 0x4c>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ watchdog@28 { ++ compatible = "brcm,bcm6345-wdt"; ++ reg = <0x28 0x8>; ++ }; ++ }; ++ ++ gpio0: gpio-controller@500 { ++ compatible = "brcm,bcm6345-gpio"; ++ reg-names = "dirout", "dat"; ++ reg = <0x500 0x28>, <0x528 0x28>; ++ ++ #gpio-cells = <2>; ++ gpio-controller; ++ }; ++ ++ pinctrl@560 { ++ compatible = "brcm,bcm4908-pinctrl"; ++ reg = <0x560 0x10>; ++ ++ pins_led_0_a: led_0-a-pins { ++ function = "led_0"; ++ groups = "led_0_grp_a"; ++ }; ++ ++ pins_led_1_a: led_1-a-pins { ++ function = "led_1"; ++ groups = "led_1_grp_a"; ++ }; ++ ++ pins_led_2_a: led_2-a-pins { ++ function = "led_2"; ++ groups = "led_2_grp_a"; ++ }; ++ ++ pins_led_3_a: led_3-a-pins { ++ function = "led_3"; ++ groups = "led_3_grp_a"; ++ }; ++ ++ pins_led_4_a: led_4-a-pins { ++ function = "led_4"; ++ groups = "led_4_grp_a"; ++ }; ++ ++ pins_led_5_a: led_5-a-pins { ++ function = "led_5"; ++ groups = "led_5_grp_a"; ++ }; ++ ++ pins_led_6_a: led_6-a-pins { ++ function = "led_6"; ++ groups = "led_6_grp_a"; ++ }; ++ ++ pins_led_7_a: led_7-a-pins { ++ function = "led_7"; ++ groups = "led_7_grp_a"; ++ }; ++ ++ pins_led_8_a: led_8-a-pins { ++ function = "led_8"; ++ groups = "led_8_grp_a"; ++ }; ++ ++ pins_led_9_a: led_9-a-pins { ++ function = "led_9"; ++ groups = "led_9_grp_a"; ++ }; ++ ++ pins_led_10_a: led_10-a-pins { ++ function = "led_10"; ++ groups = "led_10_grp_a"; ++ }; ++ ++ pins_led_11_a: led_11-a-pins { ++ function = "led_11"; ++ groups = "led_11_grp_a"; ++ }; ++ ++ pins_led_12_a: led_12-a-pins { ++ function = "led_12"; ++ groups = "led_12_grp_a"; ++ }; ++ ++ pins_led_13_a: led_13-a-pins { ++ function = "led_13"; ++ groups = "led_13_grp_a"; ++ }; ++ ++ pins_led_14_a: led_14-a-pins { ++ function = "led_14"; ++ groups = "led_14_grp_a"; ++ }; ++ ++ pins_led_15_a: led_15-a-pins { ++ function = "led_15"; ++ groups = "led_15_grp_a"; ++ }; ++ ++ pins_led_16_a: led_16-a-pins { ++ function = "led_16"; ++ groups = "led_16_grp_a"; ++ }; ++ ++ pins_led_17_a: led_17-a-pins { ++ function = "led_17"; ++ groups = "led_17_grp_a"; ++ }; ++ ++ pins_led_18_a: led_18-a-pins { ++ function = "led_18"; ++ groups = "led_18_grp_a"; ++ }; ++ ++ pins_led_19_a: led_19-a-pins { ++ function = "led_19"; ++ groups = "led_19_grp_a"; ++ }; ++ ++ pins_led_20_a: led_20-a-pins { ++ function = "led_20"; ++ groups = "led_20_grp_a"; ++ }; ++ ++ pins_led_21_a: led_21-a-pins { ++ function = "led_21"; ++ groups = "led_21_grp_a"; ++ }; ++ ++ pins_led_22_a: led_22-a-pins { ++ function = "led_22"; ++ groups = "led_22_grp_a"; ++ }; ++ ++ pins_led_23_a: led_23-a-pins { ++ function = "led_23"; ++ groups = "led_23_grp_a"; ++ }; ++ ++ pins_led_24_a: led_24-a-pins { ++ function = "led_24"; ++ groups = "led_24_grp_a"; ++ }; ++ ++ pins_led_25_a: led_25-a-pins { ++ function = "led_25"; ++ groups = "led_25_grp_a"; ++ }; ++ ++ pins_led_26_a: led_26-a-pins { ++ function = "led_26"; ++ groups = "led_26_grp_a"; ++ }; ++ ++ pins_led_27_a: led_27-a-pins { ++ function = "led_27"; ++ groups = "led_27_grp_a"; ++ }; ++ ++ pins_led_28_a: led_28-a-pins { ++ function = "led_28"; ++ groups = "led_28_grp_a"; ++ }; ++ ++ pins_led_29_a: led_29-a-pins { ++ function = "led_29"; ++ groups = "led_29_grp_a"; ++ }; ++ ++ pins_led_30_a: led_30-a-pins { ++ function = "led_30"; ++ groups = "led_30_grp_a"; ++ }; ++ ++ pins_led_31_a: led_31-a-pins { ++ function = "led_31"; ++ groups = "led_31_grp_a"; ++ }; ++ ++ pins_hs_uart: hs_uart-pins { ++ function = "hs_uart"; ++ groups = "hs_uart_grp"; ++ }; ++ ++ pins_i2c_a: i2c-a-pins { ++ function = "i2c"; ++ groups = "i2c_grp_a"; ++ }; ++ ++ pins_i2c_b: i2c-b-pins { ++ function = "i2c"; ++ groups = "i2c_grp_b"; ++ }; ++ ++ pins_i2s: i2s-pins { ++ function = "i2s"; ++ groups = "i2s_grp"; ++ }; ++ ++ pins_nand_ctrl: nand_ctrl-pins { ++ function = "nand_ctrl"; ++ groups = "nand_ctrl_grp"; ++ }; ++ ++ pins_nand_data: nand_data-pins { ++ function = "nand_data"; ++ groups = "nand_data_grp"; ++ }; ++ ++ pins_emmc_ctrl: emmc_ctrl-pins { ++ function = "emmc_ctrl"; ++ groups = "emmc_ctrl_grp"; ++ }; ++ ++ pins_usb0_pwr: usb0_pwr-pins { ++ function = "usb0_pwr"; ++ groups = "usb0_pwr_grp"; ++ }; ++ ++ pins_usb1_pwr: usb1_pwr-pins { ++ function = "usb1_pwr"; ++ groups = "usb1_pwr_grp"; ++ }; ++ }; ++ ++ uart0: serial@640 { ++ compatible = "brcm,bcm6345-uart"; ++ reg = <0x640 0x18>; ++ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&periph_clk>; ++ clock-names = "refclk"; ++ status = "okay"; ++ }; ++ ++ leds: leds@800 { ++ compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds"; ++ reg = <0x800 0xdc>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ nand-controller@1800 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; ++ reg = <0x1800 0x600>, <0x2000 0x10>; ++ reg-names = "nand", "nand-int-base"; ++ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; ++ interrupt-names = "nand"; ++ status = "okay"; ++ ++ nandcs: nand@0 { ++ compatible = "brcm,nandcs"; ++ reg = <0>; ++ }; ++ }; ++ ++ i2c@2100 { ++ compatible = "brcm,brcmper-i2c"; ++ reg = <0x2100 0x58>; ++ clock-frequency = <97500>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pins_i2c_a>; ++ status = "disabled"; ++ }; ++ ++ misc@2600 { ++ compatible = "brcm,misc", "simple-mfd"; ++ reg = <0x2600 0xe4>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x00 0x2600 0xe4>; ++ ++ reset-controller@2644 { ++ compatible = "brcm,bcm4908-misc-pcie-reset"; ++ reg = <0x44 0x04>; ++ #reset-cells = <1>; ++ }; ++ }; ++ }; ++ ++ reboot { ++ compatible = "syscon-reboot"; ++ regmap = <&twd>; ++ offset = <0x34>; ++ mask = <1>; ++ }; ++}; |