aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata8
-rw-r--r--target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi30
2 files changed, 8 insertions, 30 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index e0b4eed6f2..8fb9d81d3b 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -127,6 +127,10 @@ case "$FIRMWARE" in
caldata_extract_mmc "0:ART" 0x1000 0x2f20
ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
;;
+ teltonika,rutx10)
+ caldata_extract "0:ART" 0x1000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
+ ;;
zyxel,nbg6617 |\
zyxel,wre6606)
caldata_extract "ART" 0x1000 0x2f20
@@ -208,6 +212,10 @@ case "$FIRMWARE" in
caldata_extract_mmc "0:ART" 0x5000 0x2f20
ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
;;
+ teltonika,rutx10)
+ caldata_extract "0:ART" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
+ ;;
zyxel,nbg6617 |\
zyxel,wre6606)
caldata_extract "ART" 0x5000 0x2f20
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
index ebb2d08e73..3673a13430 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi
@@ -188,30 +188,12 @@
label = "0:ART";
reg = <0x2e0000 0x10000>;
read-only;
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- precal_art_1000: precal@1000 {
- reg = <0x1000 0x2f20>;
- };
-
- precal_art_5000: precal@5000 {
- reg = <0x5000 0x2f20>;
- };
};
config: partition@2f0000 {
label = "0:CONFIG";
reg = <0x2f0000 0x10000>;
read-only;
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_config_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
};
partition@300000 {
@@ -267,15 +249,3 @@
pinctrl-names = "default";
phy-reset-gpio = <&tlmm 62 0>;
};
-
-&wifi0 {
- nvmem-cell-names = "pre-calibration", "mac-address";
- nvmem-cells = <&precal_art_1000>, <&macaddr_config_0>;
- mac-address-increment = <2>;
-};
-
-&wifi1 {
- nvmem-cell-names = "pre-calibration", "mac-address";
- nvmem-cells = <&precal_art_5000>, <&macaddr_config_0>;
- mac-address-increment = <3>;
-};