aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch10
-rw-r--r--target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch2
-rw-r--r--target/linux/ath79/patches-5.10/939-mikrotik-rb91x.patch4
-rw-r--r--target/linux/bcm27xx/patches-5.10/950-0151-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch2
-rw-r--r--target/linux/bcm27xx/patches-5.10/950-0348-gpio-Add-gpio-fsm-driver.patch2
-rw-r--r--target/linux/bcm4908/patches-5.10/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch4
-rw-r--r--target/linux/bcm4908/patches-5.10/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch6
-rw-r--r--target/linux/bcm4908/patches-5.10/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch2
-rw-r--r--target/linux/bcm4908/patches-5.10/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch30
-rw-r--r--target/linux/generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch2
-rw-r--r--target/linux/generic/pending-5.10/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch2
-rw-r--r--target/linux/generic/pending-5.10/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch18
-rw-r--r--target/linux/generic/pending-5.10/834-ledtrig-libata.patch8
-rw-r--r--target/linux/ipq806x/patches-5.10/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch38
-rw-r--r--target/linux/oxnas/patches-5.10/999-libata-hacks.patch4
-rw-r--r--target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch2
-rw-r--r--target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch2
-rw-r--r--target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch2
18 files changed, 50 insertions, 90 deletions
diff --git a/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch b/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch
index e0bd900479..cee1db1545 100644
--- a/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch
+++ b/target/linux/ath79/patches-5.10/910-unaligned_access_hacks.patch
@@ -579,7 +579,7 @@
#define IP6_MF 0x0001
#define IP6_OFFSET 0xFFF8
-@@ -557,8 +557,8 @@ static inline void __ipv6_addr_set_half(
+@@ -560,8 +560,8 @@ static inline void __ipv6_addr_set_half(
}
#endif
#endif
@@ -590,7 +590,7 @@
}
static inline void ipv6_addr_set(struct in6_addr *addr,
-@@ -617,6 +617,8 @@ static inline bool ipv6_prefix_equal(con
+@@ -620,6 +620,8 @@ static inline bool ipv6_prefix_equal(con
const __be32 *a1 = addr1->s6_addr32;
const __be32 *a2 = addr2->s6_addr32;
unsigned int pdw, pbi;
@@ -599,7 +599,7 @@
/* check complete u32 in prefix */
pdw = prefixlen >> 5;
-@@ -625,7 +627,9 @@ static inline bool ipv6_prefix_equal(con
+@@ -628,7 +630,9 @@ static inline bool ipv6_prefix_equal(con
/* check incomplete u32 in prefix */
pbi = prefixlen & 0x1f;
@@ -610,7 +610,7 @@
return false;
return true;
-@@ -746,13 +750,13 @@ static inline void ipv6_addr_set_v4mappe
+@@ -749,13 +753,13 @@ static inline void ipv6_addr_set_v4mappe
*/
static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
{
@@ -626,7 +626,7 @@
if (xb)
return i * 32 + 31 - __fls(ntohl(xb));
}
-@@ -938,17 +942,18 @@ static inline int ip6_multipath_hash_pol
+@@ -941,17 +945,18 @@ static inline int ip6_multipath_hash_pol
static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
__be32 flowlabel)
{
diff --git a/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch b/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch
index 3129fac3ab..4ed13deb5c 100644
--- a/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch
+++ b/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch
@@ -42,7 +42,7 @@
menu "SPI GPIO expanders"
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -120,6 +120,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.
+@@ -121,6 +121,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061.
obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o
diff --git a/target/linux/ath79/patches-5.10/939-mikrotik-rb91x.patch b/target/linux/ath79/patches-5.10/939-mikrotik-rb91x.patch
index 4f4344b40f..4cf6bb08df 100644
--- a/target/linux/ath79/patches-5.10/939-mikrotik-rb91x.patch
+++ b/target/linux/ath79/patches-5.10/939-mikrotik-rb91x.patch
@@ -27,7 +27,7 @@
depends on MFD_SYSCON
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -72,6 +72,7 @@ obj-$(CONFIG_GPIO_IT87) += gpio-it87.o
+@@ -73,6 +73,7 @@ obj-$(CONFIG_GPIO_IT87) += gpio-it87.o
obj-$(CONFIG_GPIO_IXP4XX) += gpio-ixp4xx.o
obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o
obj-$(CONFIG_GPIO_KEMPLD) += gpio-kempld.o
@@ -35,7 +35,7 @@
obj-$(CONFIG_GPIO_LOGICVC) += gpio-logicvc.o
obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o
obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
-@@ -121,6 +122,7 @@ obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio
+@@ -122,6 +123,7 @@ obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o
obj-$(CONFIG_GPIO_RB4XX) += gpio-rb4xx.o
diff --git a/target/linux/bcm27xx/patches-5.10/950-0151-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch b/target/linux/bcm27xx/patches-5.10/950-0151-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch
index fa76e0a822..26ced7adfe 100644
--- a/target/linux/bcm27xx/patches-5.10/950-0151-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch
+++ b/target/linux/bcm27xx/patches-5.10/950-0151-hid-usb-Add-device-quirks-for-Freeway-Airmouse-T3-an.patch
@@ -53,7 +53,7 @@ Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_PIXART_USB_OPTICAL_MOUSE2), HID_QUIRK_ALWAYS_POLL },
-@@ -194,6 +195,7 @@ static const struct hid_device_id hid_qu
+@@ -195,6 +196,7 @@ static const struct hid_device_id hid_qu
{ HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_QUAD_USB_JOYPAD), HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_GROUP_AUDIO), HID_QUIRK_NOGET },
diff --git a/target/linux/bcm27xx/patches-5.10/950-0348-gpio-Add-gpio-fsm-driver.patch b/target/linux/bcm27xx/patches-5.10/950-0348-gpio-Add-gpio-fsm-driver.patch
index 9d2e2f87c6..2fdef53ea7 100644
--- a/target/linux/bcm27xx/patches-5.10/950-0348-gpio-Add-gpio-fsm-driver.patch
+++ b/target/linux/bcm27xx/patches-5.10/950-0348-gpio-Add-gpio-fsm-driver.patch
@@ -42,7 +42,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
depends on MFD_JANZ_CMODIO
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -60,6 +60,7 @@ obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93x
+@@ -61,6 +61,7 @@ obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93x
obj-$(CONFIG_GPIO_EXAR) += gpio-exar.o
obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
obj-$(CONFIG_GPIO_FTGPIO010) += gpio-ftgpio010.o
diff --git a/target/linux/bcm4908/patches-5.10/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch b/target/linux/bcm4908/patches-5.10/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch
index cc71373165..ec9b1fea3d 100644
--- a/target/linux/bcm4908/patches-5.10/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch
+++ b/target/linux/bcm4908/patches-5.10/086-v5.12-0001-phy-phy-brcm-usb-improve-getting-OF-matching-data.patch
@@ -27,7 +27,7 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
-@@ -427,7 +428,6 @@ static int brcm_usb_phy_probe(struct pla
+@@ -457,7 +458,6 @@ static int brcm_usb_phy_probe(struct pla
struct device_node *dn = pdev->dev.of_node;
int err;
const char *mode;
@@ -35,7 +35,7 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
void (*dvr_init)(struct brcm_usb_init_params *params);
const struct match_chip_info *info;
struct regmap *rmap;
-@@ -441,8 +441,9 @@ static int brcm_usb_phy_probe(struct pla
+@@ -471,8 +471,9 @@ static int brcm_usb_phy_probe(struct pla
priv->ini.family_id = brcmstb_get_family_id();
priv->ini.product_id = brcmstb_get_product_id();
diff --git a/target/linux/bcm4908/patches-5.10/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch b/target/linux/bcm4908/patches-5.10/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch
index bdc932732c..ffb064f95f 100644
--- a/target/linux/bcm4908/patches-5.10/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch
+++ b/target/linux/bcm4908/patches-5.10/086-v5.12-0002-phy-phy-brcm-usb-specify-init-function-format-at-str.patch
@@ -20,7 +20,7 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -35,7 +35,7 @@ struct value_to_name_map {
+@@ -36,7 +36,7 @@ struct value_to_name_map {
};
struct match_chip_info {
@@ -29,7 +29,7 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
u8 required_regs[BRCM_REGS_MAX + 1];
u8 optional_reg;
};
-@@ -428,7 +428,6 @@ static int brcm_usb_phy_probe(struct pla
+@@ -458,7 +458,6 @@ static int brcm_usb_phy_probe(struct pla
struct device_node *dn = pdev->dev.of_node;
int err;
const char *mode;
@@ -37,7 +37,7 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
const struct match_chip_info *info;
struct regmap *rmap;
int x;
-@@ -444,8 +443,8 @@ static int brcm_usb_phy_probe(struct pla
+@@ -474,8 +473,8 @@ static int brcm_usb_phy_probe(struct pla
info = of_device_get_match_data(&pdev->dev);
if (!info)
return -ENOENT;
diff --git a/target/linux/bcm4908/patches-5.10/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch b/target/linux/bcm4908/patches-5.10/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch
index a2cea0f138..362738c802 100644
--- a/target/linux/bcm4908/patches-5.10/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch
+++ b/target/linux/bcm4908/patches-5.10/086-v5.12-0005-phy-phy-brcm-usb-support-PHY-on-the-BCM4908.patch
@@ -35,7 +35,7 @@ Signed-off-by: Vinod Koul <vkoul@kernel.org>
Enable this to support the Broadcom STB USB PHY.
--- a/drivers/phy/broadcom/phy-brcm-usb.c
+++ b/drivers/phy/broadcom/phy-brcm-usb.c
-@@ -287,6 +287,10 @@ static const struct match_chip_info chip
+@@ -317,6 +317,10 @@ static const struct match_chip_info chip
static const struct of_device_id brcm_usb_dt_ids[] = {
{
diff --git a/target/linux/bcm4908/patches-5.10/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch b/target/linux/bcm4908/patches-5.10/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch
deleted file mode 100644
index 4efe4fa1cf..0000000000
--- a/target/linux/bcm4908/patches-5.10/180-i2c-brcmstb-fix-support-for-DSL-and-CM-variants.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 15 Feb 2022 08:27:35 +0100
-Subject: [PATCH] i2c: brcmstb: fix support for DSL and CM variants
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-DSL and CM (Cable Modem) support 8 B max transfer size and have a custom
-DT binding for that reason. This driver was checking for a wrong
-"compatible" however which resulted in an incorrect setup.
-
-Fixes: e2e5a2c61837 ("i2c: brcmstb: Adding support for CM and DSL SoCs")
-Cc: Kamal Dasu <kdasu.kdev@gmail.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
----
- drivers/i2c/busses/i2c-brcmstb.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/i2c/busses/i2c-brcmstb.c
-+++ b/drivers/i2c/busses/i2c-brcmstb.c
-@@ -674,7 +674,7 @@ static int brcmstb_i2c_probe(struct plat
-
- /* set the data in/out register size for compatible SoCs */
- if (of_device_is_compatible(dev->device->of_node,
-- "brcmstb,brcmper-i2c"))
-+ "brcm,brcmper-i2c"))
- dev->data_regsz = sizeof(u8);
- else
- dev->data_regsz = sizeof(u32);
diff --git a/target/linux/generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
index 68edf37bf7..d85735531b 100644
--- a/target/linux/generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
+++ b/target/linux/generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch
@@ -20,7 +20,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org>
--- a/include/net/netns/ipv6.h
+++ b/include/net/netns/ipv6.h
-@@ -87,6 +87,7 @@ struct netns_ipv6 {
+@@ -88,6 +88,7 @@ struct netns_ipv6 {
unsigned int fib6_routes_require_src;
#endif
struct rt6_info *ip6_prohibit_entry;
diff --git a/target/linux/generic/pending-5.10/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch b/target/linux/generic/pending-5.10/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch
index 0f1df84b30..ecd6e9e7a2 100644
--- a/target/linux/generic/pending-5.10/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch
+++ b/target/linux/generic/pending-5.10/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch
@@ -164,7 +164,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
struct rtnl_link {
rtnl_doit_func doit;
-@@ -4682,7 +4682,9 @@ int ndo_dflt_bridge_getlink(struct sk_bu
+@@ -4684,7 +4684,9 @@ int ndo_dflt_bridge_getlink(struct sk_bu
brport_nla_put_flag(skb, flags, mask,
IFLA_BRPORT_MCAST_FLOOD, BR_MCAST_FLOOD) ||
brport_nla_put_flag(skb, flags, mask,
diff --git a/target/linux/generic/pending-5.10/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch b/target/linux/generic/pending-5.10/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch
index 8d3b3cf962..af44ff24ac 100644
--- a/target/linux/generic/pending-5.10/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch
+++ b/target/linux/generic/pending-5.10/801-gpio-gpio-cascade-add-generic-GPIO-cascade.patch
@@ -68,13 +68,11 @@ v1 -> v2:
3 files changed, 133 insertions(+)
create mode 100644 drivers/gpio/gpio-cascade.c
-diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
-index 37a6f77c86fe..e69457144459 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
-@@ -1694,4 +1694,19 @@ config GPIO_VIRTIO
-
- endmenu
+@@ -1617,4 +1617,19 @@ config GPIO_MOCKUP
+ tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in
+ it.
+comment "Other GPIO expanders"
+
@@ -92,11 +90,9 @@ index 37a6f77c86fe..e69457144459 100644
+ will be called 'gpio-cascade'.
+
endif
-diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
-index 71ee9fc2ff83..e8945456e7ea 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd9571mwv.o
+@@ -44,6 +44,7 @@ obj-$(CONFIG_GPIO_BD9571MWV) += gpio-bd
obj-$(CONFIG_GPIO_BRCMSTB) += gpio-brcmstb.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CADENCE) += gpio-cadence.o
@@ -104,9 +100,6 @@ index 71ee9fc2ff83..e8945456e7ea 100644
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_SNPS_CREG) += gpio-creg-snps.o
obj-$(CONFIG_GPIO_CRYSTAL_COVE) += gpio-crystalcove.o
-diff --git a/drivers/gpio/gpio-cascade.c b/drivers/gpio/gpio-cascade.c
-new file mode 100644
-index 000000000000..5cbda882d79a
--- /dev/null
+++ b/drivers/gpio/gpio-cascade.c
@@ -0,0 +1,117 @@
@@ -227,6 +220,3 @@ index 000000000000..5cbda882d79a
+MODULE_AUTHOR("Mauri Sandberg <maukka@ext.kapsi.fi>");
+MODULE_DESCRIPTION("Generic GPIO cascade");
+MODULE_LICENSE("GPL");
---
-2.25.1
-
diff --git a/target/linux/generic/pending-5.10/834-ledtrig-libata.patch b/target/linux/generic/pending-5.10/834-ledtrig-libata.patch
index e43a97bfe8..25cffb1444 100644
--- a/target/linux/generic/pending-5.10/834-ledtrig-libata.patch
+++ b/target/linux/generic/pending-5.10/834-ledtrig-libata.patch
@@ -65,7 +65,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
/**
* ata_build_rw_tf - Build ATA taskfile for given read/write request
* @tf: Target ATA taskfile
-@@ -4547,6 +4560,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
+@@ -4548,6 +4561,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
if (tag < 0)
return NULL;
}
@@ -75,7 +75,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
qc = __ata_qc_from_tag(ap, tag);
qc->tag = qc->hw_tag = tag;
-@@ -5325,6 +5341,9 @@ struct ata_port *ata_port_alloc(struct a
+@@ -5326,6 +5342,9 @@ struct ata_port *ata_port_alloc(struct a
ap->stats.unhandled_irq = 1;
ap->stats.idle_irq = 1;
#endif
@@ -85,7 +85,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
ata_sff_port_init(ap);
return ap;
-@@ -5360,6 +5379,12 @@ static void ata_host_release(struct kref
+@@ -5361,6 +5380,12 @@ static void ata_host_release(struct kref
kfree(ap->pmp_link);
kfree(ap->slave_link);
@@ -98,7 +98,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
kfree(ap);
host->ports[i] = NULL;
}
-@@ -5766,7 +5791,23 @@ int ata_host_register(struct ata_host *h
+@@ -5767,7 +5792,23 @@ int ata_host_register(struct ata_host *h
host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
host->ports[i]->local_port_no = i + 1;
}
diff --git a/target/linux/ipq806x/patches-5.10/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch b/target/linux/ipq806x/patches-5.10/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch
index 6106dfb8dc..37501bc64b 100644
--- a/target/linux/ipq806x/patches-5.10/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch
+++ b/target/linux/ipq806x/patches-5.10/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch
@@ -16,7 +16,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
-@@ -159,6 +159,11 @@
+@@ -158,6 +158,11 @@
/* NAND_CTRL bits */
#define BAM_MODE_EN BIT(0)
@@ -28,7 +28,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
/*
* the NAND controller performs reads/writes with ECC in 516 byte chunks.
* the driver calls the chunks 'step' or 'codeword' interchangeably
-@@ -430,6 +435,13 @@ struct qcom_nand_controller {
+@@ -429,6 +434,13 @@ struct qcom_nand_controller {
* @cfg0, cfg1, cfg0_raw..: NANDc register configurations needed for
* ecc/non-ecc mode for the current nand flash
* device
@@ -42,7 +42,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
*/
struct qcom_nand_host {
struct nand_chip chip;
-@@ -452,6 +464,9 @@ struct qcom_nand_host {
+@@ -451,6 +463,9 @@ struct qcom_nand_host {
u32 ecc_bch_cfg;
u32 clrflashstatus;
u32 clrreadstatus;
@@ -52,7 +52,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
};
/*
-@@ -460,12 +475,14 @@ struct qcom_nand_host {
+@@ -459,12 +474,14 @@ struct qcom_nand_host {
* @ecc_modes - ecc mode for NAND
* @is_bam - whether NAND controller is using BAM
* @is_qpic - whether NAND CTRL is part of qpic IP
@@ -67,7 +67,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
u32 dev_cmd_reg_start;
};
-@@ -1604,7 +1621,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *
+@@ -1603,7 +1620,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *
data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
oob_size1 = host->bbm_size;
@@ -76,7 +76,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
data_size2 = ecc->size - data_size1 -
((ecc->steps - 1) * 4);
oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw +
-@@ -1685,7 +1702,7 @@ check_for_erased_page(struct qcom_nand_h
+@@ -1684,7 +1701,7 @@ check_for_erased_page(struct qcom_nand_h
}
for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) {
@@ -85,7 +85,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
data_size = ecc->size - ((ecc->steps - 1) * 4);
oob_size = (ecc->steps * 4) + host->ecc_bytes_hw;
} else {
-@@ -1844,7 +1861,7 @@ static int read_page_ecc(struct qcom_nan
+@@ -1843,7 +1860,7 @@ static int read_page_ecc(struct qcom_nan
for (i = 0; i < ecc->steps; i++) {
int data_size, oob_size;
@@ -94,7 +94,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
data_size = ecc->size - ((ecc->steps - 1) << 2);
oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
host->spare_bytes;
-@@ -1941,6 +1958,30 @@ static int copy_last_cw(struct qcom_nand
+@@ -1940,6 +1957,30 @@ static int copy_last_cw(struct qcom_nand
return ret;
}
@@ -125,7 +125,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
/* implements ecc->read_page() */
static int qcom_nandc_read_page(struct nand_chip *chip, uint8_t *buf,
int oob_required, int page)
-@@ -1949,6 +1990,9 @@ static int qcom_nandc_read_page(struct n
+@@ -1948,6 +1989,9 @@ static int qcom_nandc_read_page(struct n
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
u8 *data_buf, *oob_buf = NULL;
@@ -135,7 +135,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
nand_read_page_op(chip, page, 0, NULL, 0);
data_buf = buf;
oob_buf = oob_required ? chip->oob_poi : NULL;
-@@ -1968,6 +2012,9 @@ static int qcom_nandc_read_page_raw(stru
+@@ -1967,6 +2011,9 @@ static int qcom_nandc_read_page_raw(stru
int cw, ret;
u8 *data_buf = buf, *oob_buf = chip->oob_poi;
@@ -145,7 +145,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
for (cw = 0; cw < ecc->steps; cw++) {
ret = qcom_nandc_read_cw_raw(mtd, chip, data_buf, oob_buf,
page, cw);
-@@ -1988,6 +2035,9 @@ static int qcom_nandc_read_oob(struct na
+@@ -1987,6 +2034,9 @@ static int qcom_nandc_read_oob(struct na
struct qcom_nand_controller *nandc = get_qcom_nand_controller(chip);
struct nand_ecc_ctrl *ecc = &chip->ecc;
@@ -155,7 +155,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
clear_read_regs(nandc);
clear_bam_transaction(nandc);
-@@ -2008,6 +2058,9 @@ static int qcom_nandc_write_page(struct
+@@ -2007,6 +2057,9 @@ static int qcom_nandc_write_page(struct
u8 *data_buf, *oob_buf;
int i, ret;
@@ -165,7 +165,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
nand_prog_page_begin_op(chip, page, 0, NULL, 0);
clear_read_regs(nandc);
-@@ -2023,7 +2076,7 @@ static int qcom_nandc_write_page(struct
+@@ -2022,7 +2075,7 @@ static int qcom_nandc_write_page(struct
for (i = 0; i < ecc->steps; i++) {
int data_size, oob_size;
@@ -174,7 +174,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
data_size = ecc->size - ((ecc->steps - 1) << 2);
oob_size = (ecc->steps << 2) + host->ecc_bytes_hw +
host->spare_bytes;
-@@ -2080,6 +2133,9 @@ static int qcom_nandc_write_page_raw(str
+@@ -2079,6 +2132,9 @@ static int qcom_nandc_write_page_raw(str
u8 *data_buf, *oob_buf;
int i, ret;
@@ -184,7 +184,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
nand_prog_page_begin_op(chip, page, 0, NULL, 0);
clear_read_regs(nandc);
clear_bam_transaction(nandc);
-@@ -2098,7 +2154,7 @@ static int qcom_nandc_write_page_raw(str
+@@ -2097,7 +2153,7 @@ static int qcom_nandc_write_page_raw(str
data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
oob_size1 = host->bbm_size;
@@ -193,7 +193,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
data_size2 = ecc->size - data_size1 -
((ecc->steps - 1) << 2);
oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw +
-@@ -2158,6 +2214,9 @@ static int qcom_nandc_write_oob(struct n
+@@ -2157,6 +2213,9 @@ static int qcom_nandc_write_oob(struct n
int data_size, oob_size;
int ret;
@@ -203,7 +203,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
host->use_ecc = true;
clear_bam_transaction(nandc);
-@@ -2806,6 +2865,7 @@ static int qcom_nand_host_init_and_regis
+@@ -2805,6 +2864,7 @@ static int qcom_nand_host_init_and_regis
struct nand_chip *chip = &host->chip;
struct mtd_info *mtd = nand_to_mtd(chip);
struct device *dev = nandc->dev;
@@ -211,7 +211,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
int ret;
ret = of_property_read_u32(dn, "reg", &host->cs);
-@@ -2866,6 +2926,17 @@ static int qcom_nand_host_init_and_regis
+@@ -2865,6 +2925,17 @@ static int qcom_nand_host_init_and_regis
if (ret)
nand_cleanup(chip);
@@ -229,7 +229,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
return ret;
}
-@@ -3032,6 +3103,7 @@ static int qcom_nandc_remove(struct plat
+@@ -3030,6 +3101,7 @@ static int qcom_nandc_remove(struct plat
static const struct qcom_nandc_props ipq806x_nandc_props = {
.ecc_modes = (ECC_RS_4BIT | ECC_BCH_8BIT),
.is_bam = false,
diff --git a/target/linux/oxnas/patches-5.10/999-libata-hacks.patch b/target/linux/oxnas/patches-5.10/999-libata-hacks.patch
index 61c0c045a6..84d418887c 100644
--- a/target/linux/oxnas/patches-5.10/999-libata-hacks.patch
+++ b/target/linux/oxnas/patches-5.10/999-libata-hacks.patch
@@ -15,7 +15,7 @@
/* initialize internal qc */
qc = __ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
-@@ -4554,6 +4562,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
+@@ -4555,6 +4563,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
return NULL;
@@ -25,7 +25,7 @@
/* libsas case */
if (ap->flags & ATA_FLAG_SAS_HOST) {
tag = ata_sas_allocate_tag(ap);
-@@ -4599,6 +4610,8 @@ void ata_qc_free(struct ata_queued_cmd *
+@@ -4600,6 +4611,8 @@ void ata_qc_free(struct ata_queued_cmd *
qc->tag = ATA_TAG_POISON;
if (ap->flags & ATA_FLAG_SAS_HOST)
ata_sas_free_tag(tag, ap);
diff --git a/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
index c173336924..52d40215f2 100644
--- a/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
+++ b/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch
@@ -62,7 +62,7 @@ Cc: linux-gpio@vger.kernel.org
depends on PLAT_SPEAR
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -119,6 +119,7 @@ obj-$(CONFIG_GPIO_PISOSR) += gpio-pisos
+@@ -120,6 +120,7 @@ obj-$(CONFIG_GPIO_PISOSR) += gpio-pisos
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
diff --git a/target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch b/target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch
index fc13824282..62e4338cbb 100644
--- a/target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch
+++ b/target/linux/realtek/patches-5.10/002-5.13-gpio-add-realtek-otto-gpio-support.patch
@@ -56,7 +56,7 @@ Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
help
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -124,6 +124,7 @@ obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t
+@@ -125,6 +125,7 @@ obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
diff --git a/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch b/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch
index cdecb2a112..9175b55e8e 100644
--- a/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch
+++ b/target/linux/realtek/patches-5.10/301-gpio-add-rtl8231-driver.patch
@@ -15,7 +15,7 @@
depends on MFD_SYSCON
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -126,6 +126,7 @@ obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
+@@ -127,6 +127,7 @@ obj-$(CONFIG_GPIO_RDA) += gpio-rda.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_REALTEK_OTTO) += gpio-realtek-otto.o
obj-$(CONFIG_GPIO_REG) += gpio-reg.o