aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network6
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/WLR-6000.dts186
-rw-r--r--target/linux/ramips/image/rt3883.mk13
6 files changed, 211 insertions, 1 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 537448ec9d..1e97c3b3c2 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -226,7 +226,8 @@ ramips_setup_interfaces()
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
;;
tew-691gr|\
- tew-692gr)
+ tew-692gr|\
+ wlr-6000)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
;;
@@ -383,6 +384,9 @@ ramips_setup_macs()
lan_mac=$(mtd_get_mac_binary factory 4)
wan_mac=$(mtd_get_mac_binary factory 40)
;;
+ wlr-6000)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 32772)" 2)
+ ;;
wsr-1166)
local index="$(find_mtd_index "board_data")"
wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index f3910c7cba..52baa0b23e 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -207,6 +207,9 @@ get_status_led() {
status_led="$board:amber:power"
;;
whr-g300n|\
+ wlr-6000)
+ status_led="$board:red:power"
+ ;;
wzr-agl300nh)
status_led="$board:green:router"
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index ee9073238d..c62f5f6a93 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -508,6 +508,9 @@ ramips_board_detect() {
*"WLI-TX4-AG300N")
name="wli-tx4-ag300n"
;;
+ *"WLR-6000")
+ name="wlr-6000"
+ ;;
*"WMR-300")
name="wmr-300"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index d5d0463a60..fa108b6ce4 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -148,6 +148,7 @@ platform_check_image() {
wl-351|\
wl-wn575a3|\
wli-tx4-ag300n|\
+ wlr-6000|\
wmr-300|\
wnce2001|\
wndr3700v5|\
diff --git a/target/linux/ramips/dts/WLR-6000.dts b/target/linux/ramips/dts/WLR-6000.dts
new file mode 100644
index 0000000000..ff3096907e
--- /dev/null
+++ b/target/linux/ramips/dts/WLR-6000.dts
@@ -0,0 +1,186 @@
+/dts-v1/;
+
+#include "rt3883.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Sitecom WLR-6000";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "wlr-6000:red:power";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ };
+
+ ops {
+ label = "wlr-6000:white:ops";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb {
+ gpio-export,name = "usb";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ethernet {
+ status = "okay";
+ mtd-mac-address = <&factory 0x8004>;
+ mtd-mac-address-increment = <1>;
+
+ port@0 {
+ phy-handle = <&phy0>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x07600000 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x10 0x40000000 /* Power-on Strapping: 176-pin interface configuration */
+ 0x50 0xc437c437 /* LED Control Register 0 */
+ 0x54 0xc337c337 /* LED Control Register 1 */
+ 0x58 0x00000000 /* LED Control Register 2 */
+ 0x5c 0x03ffff00 /* LED Control Register 3 */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <8600000>;
+ m25p,fast-read;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x713000>;
+ };
+
+ partition@763000 {
+ label = "manufacture";
+ reg = <0x763000 0x7D000>;
+ read-only;
+ };
+
+ partition@7E0000 {
+ label = "backup";
+ reg = <0x7E0000 0x10000>;
+ read-only;
+ };
+
+ partition@7F0000 {
+ label = "storage";
+ reg = <0x7F0000 0x10000>;
+ read-only;
+ };
+ };
+};
+
+&pci {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pci_pins>;
+
+ pci_pins: pci {
+ pci {
+ ralink,group = "pci";
+ ralink,function = "pci-fnc";
+ };
+ };
+
+ host-bridge {
+ pci-bridge@1 {
+ status = "okay";
+
+ wifi@1814,3091 {
+ compatible = "pci1814,3091";
+ reg = <0x10000 0 0 0 0>;
+ ralink,mtd-eeprom = <&factory 0x8000>;
+ };
+ };
+ };
+};
+
+&wmac {
+ status = "okay";
+ ralink,2ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
diff --git a/target/linux/ramips/image/rt3883.mk b/target/linux/ramips/image/rt3883.mk
index efdbc1f6a8..89b215d6af 100644
--- a/target/linux/ramips/image/rt3883.mk
+++ b/target/linux/ramips/image/rt3883.mk
@@ -87,6 +87,19 @@ endef
TARGET_DEVICES += tew-692gr
+define Device/wlr-6000
+ DTS := WLR-6000
+ BLOCKSIZE := 4k
+ IMAGE_SIZE := 7244k
+ IMAGES += factory.dlf
+ IMAGE/factory.dlf := \
+ $$(IMAGE/sysupgrade.bin) | senao-header -r 0x0202 -p 0x41 -t 2
+ DEVICE_TITLE := Sitecom WLR-6000
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 swconfig
+endef
+TARGET_DEVICES += wlr-6000
+
+
define BuildFirmware/RTN56U/squashfs
$(call BuildFirmware/Default8M/$(1),$(1),rt-n56u,RT-N56U)
-mkrtn56uimg -s $(call sysupname,$(1),rt-n56u)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 20:39:01 +0000