diff options
Diffstat (limited to 'target/linux')
-rw-r--r-- | target/linux/ramips/dts/mt7620a_wavlink_wl-wn530hg4.dts | 138 | ||||
-rw-r--r-- | target/linux/ramips/image/mt7620.mk | 9 | ||||
-rwxr-xr-x | target/linux/ramips/mt7620/base-files/etc/board.d/02_network | 6 |
3 files changed, 151 insertions, 2 deletions
diff --git a/target/linux/ramips/dts/mt7620a_wavlink_wl-wn530hg4.dts b/target/linux/ramips/dts/mt7620a_wavlink_wl-wn530hg4.dts new file mode 100644 index 0000000000..d8ce40c8d1 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_wavlink_wl-wn530hg4.dts @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "mt7620a.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "wavlink,wl-wn530hg4", "ralink,mt7620a-soc"; + model = "Wavlink WL-WN530HG4"; + + aliases { + led-boot = &led_status_blue; + led-failsafe = &led_status_blue; + led-running = &led_status_blue; + led-upgrade = &led_status_blue; + serial0 = &uartlite; + }; + + leds { + compatible = "gpio-leds"; + + led_status_blue: status_blue { + label = "blue:status"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + }; + + status_yellow { + label = "yellow:status"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + status_red { + label = "red:status"; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "uartf"; + function = "gpio"; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii2_pins &mdio_pins>; + + mtd-mac-address = <&factory 0x28>; + + mediatek,portmap = "llllw"; + + port@5 { + status = "okay"; + phy-handle = <&phy5>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + phy5: ethernet-phy@5 { + reg = <5>; + phy-mode = "rgmii"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&wmac { + pinctrl-names = "default"; + pinctrl-0 = <&pa_pins>; + + ralink,mtd-eeprom = <&factory 0x0>; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index d9725c9e69..dfdb5f28d3 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -1078,6 +1078,15 @@ define Device/vonets_var11n-300 endef TARGET_DEVICES += vonets_var11n-300 +define Device/wavlink_wl-wn530hg4 + SOC := mt7620a + IMAGE_SIZE := 7872k + DEVICE_VENDOR := Wavlink + DEVICE_MODEL := WL-WN530HG4 + DEVICE_PACKAGES := kmod-mt76x2 +endef +TARGET_DEVICES += wavlink_wl-wn530hg4 + define Device/wrtnode_wrtnode SOC := mt7620n IMAGE_SIZE := 16064k diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 3fdd42bbff..e884390c31 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -193,7 +193,8 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "4:lan" "0:wan" "6@eth0" ;; - phicomm,k2g) + phicomm,k2g|\ + wavlink,wl-wn530hg4) ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0" ;; @@ -334,7 +335,8 @@ ramips_setup_macs() lenovo,newifi-y1|\ lenovo,newifi-y1s|\ ohyeah,oy-0001|\ - phicomm,k2g) + phicomm,k2g|\ + wavlink,wl-wn530hg4) wan_mac=$(mtd_get_mac_binary factory 0x2e) ;; linksys,e1700) |