diff options
Diffstat (limited to 'target/linux')
| -rwxr-xr-x | target/linux/brcm63xx/base-files/etc/board.d/01_leds | 3 | ||||
| -rwxr-xr-x | target/linux/brcm63xx/base-files/etc/board.d/02_network | 1 | ||||
| -rw-r--r-- | target/linux/brcm63xx/base-files/etc/diag.sh | 3 | ||||
| -rwxr-xr-x | target/linux/brcm63xx/base-files/lib/brcm63xx.sh | 3 | ||||
| -rw-r--r-- | target/linux/brcm63xx/dts/ad1018-nor.dts | 136 | ||||
| -rw-r--r-- | target/linux/brcm63xx/image/bcm63xx.mk | 12 | ||||
| -rw-r--r-- | target/linux/brcm63xx/patches-4.4/580-board_AD1018.patch | 93 |
7 files changed, 251 insertions, 0 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/board.d/01_leds b/target/linux/brcm63xx/base-files/etc/board.d/01_leds index ef70cde791..d25d37e847 100755 --- a/target/linux/brcm63xx/base-files/etc/board.d/01_leds +++ b/target/linux/brcm63xx/base-files/etc/board.d/01_leds @@ -15,6 +15,9 @@ a4001n1) a4001n) ucidef_set_led_usbdev "usb" "USB" "A4001N:green:usb" "1-1" ;; +ad1018-nor) + ucidef_set_led_netdev "wlan0" "WLAN" "AD1018:green:wifi" "wlan0" + ;; ar-5315u) ucidef_set_led_usbdev "usb" "USB" "AR-5315u:green:usb" "1-1" ;; diff --git a/target/linux/brcm63xx/base-files/etc/board.d/02_network b/target/linux/brcm63xx/base-files/etc/board.d/02_network index 9addba654a..06b4b6eced 100755 --- a/target/linux/brcm63xx/base-files/etc/board.d/02_network +++ b/target/linux/brcm63xx/base-files/etc/board.d/02_network @@ -98,6 +98,7 @@ vr-3026e) "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "8t@eth0" ;; +ad1018-nor|\ ar-5315u |\ vh4032n) ucidef_add_switch "switch0" \ diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh index 700c9ea85a..2663a2cadc 100644 --- a/target/linux/brcm63xx/base-files/etc/diag.sh +++ b/target/linux/brcm63xx/base-files/etc/diag.sh @@ -12,6 +12,9 @@ set_state() { a4001n) status_led="A4001N:green:power" ;; + ad1018) + status_led="AD1018:green:power" + ;; ar-5315u) status_led="AR-5315u:green:power" ;; diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh index 3f46633fad..82abd737ce 100755 --- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh +++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh @@ -228,6 +228,9 @@ brcm63xx_dt_detect() { "Sagem F@ST2704V2") board_name="fast2704v2" ;; + "Sercomm AD1018 (SPI flash mod)") + board_name="ad1018-nor" + ;; "SFR Neuf Box 4"*) board_name="neufbox4" ;; diff --git a/target/linux/brcm63xx/dts/ad1018-nor.dts b/target/linux/brcm63xx/dts/ad1018-nor.dts new file mode 100644 index 0000000000..d7632c69de --- /dev/null +++ b/target/linux/brcm63xx/dts/ad1018-nor.dts @@ -0,0 +1,136 @@ +/dts-v1/; + +#include "bcm6328.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "Sercomm AD1018 (SPI flash mod)"; + compatible = "sercomm,ad1018-nor", "brcm,bcm6328"; + + chosen { + bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + debounce-interval = <60>; + + wps { + label = "wps"; + gpios = <&pinctrl 24 1>; + linux,code = <KEY_WPS_BUTTON>; + }; + wifi { + label = "wifi"; + gpios = <&pinctrl 25 1>; + linux,code = <KEY_WLAN>; + }; + reset { + label = "reset"; + gpios = <&pinctrl 31 1>; + linux,code = <KEY_RESTART>; + }; + }; + +}; + +&pinctrl { + pinctrl_leds: leds { + function = "led"; + pins = "gpio0", "gpio1"; + }; +}; + +&leds { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds &pinctrl_serial_led + &pinctrl_ephy0_spd_led &pinctrl_ephy1_act_led + &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>; + + brcm,serial-leds; + brcm,serial-shift-inv; + brcm,serial-dat-low; + + inet_red@0 { + reg = <0>; + active-low; + label = "AD1018:red:internet"; + }; + + inet_green@1 { + reg = <1>; + active-low; + label = "AD1018:green:internet"; + }; + + power_green@8 { + reg = <8>; + active-low; + label = "AD1018:green:power"; + default-state = "on"; + }; + + adsl_green@10 { + reg = <10>; + active-low; + label = "AD1018:green:adsl"; + }; + + adsl_red@11 { + reg = <11>; + active-low; + label = "AD1018:red:adsl"; + }; + + phone_green@12 { + reg = <12>; + active-low; + label = "AD1018:green:phone"; + }; + + wps_green@13 { + reg = <13>; + active-low; + label = "AD1018:green:wps"; + }; + + wifi_green@14 { + reg = <14>; + active-low; + label = "AD1018:green:wifi"; + }; + + usb_green@15 { + reg = <15>; + active-low; + label = "AD1018:green:usb"; + }; + + ephy0_spd@17 { + reg = <17>; + brcm,hardware-controlled; + }; +}; + +&hsspi { + status = "ok"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <16666667>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + reg = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + linux,part-probe = "bcm63xxpart"; + }; +}; diff --git a/target/linux/brcm63xx/image/bcm63xx.mk b/target/linux/brcm63xx/image/bcm63xx.mk index 4e90eb0504..918dfc7981 100644 --- a/target/linux/brcm63xx/image/bcm63xx.mk +++ b/target/linux/brcm63xx/image/bcm63xx.mk @@ -971,6 +971,18 @@ define Device/FAST2704V2 endef TARGET_DEVICES += FAST2704V2 +### Sercomm ### +define Device/AD1018-SPI_flash + $(Device/bcm63xx) + DEVICE_TITLE := Sercomm AD1018 (SPI flash mod) + DEVICE_DTS := ad1018-nor + CFE_BOARD_ID := 96328avngr + CFE_CHIP_ID := 6328 + DEVICE_PACKAGES := \ + $(B43_PACKAGES) $(USB2_PACKAGES) +endef +TARGET_DEVICES += AD1018-SPI_flash + ### SFR ### define Device/NEUFBOX4-SER $(Device/bcm63xx) diff --git a/target/linux/brcm63xx/patches-4.4/580-board_AD1018.patch b/target/linux/brcm63xx/patches-4.4/580-board_AD1018.patch new file mode 100644 index 0000000000..c08e00dbe8 --- /dev/null +++ b/target/linux/brcm63xx/patches-4.4/580-board_AD1018.patch @@ -0,0 +1,93 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -366,6 +366,74 @@ static struct board_info __initdata boar + }, + }; + ++static struct sprom_fixup __initdata ad1018_fixups[] = { ++ { .offset = 6, .value = 0x1c00 }, ++ { .offset = 65, .value = 0x1256 }, ++ { .offset = 96, .value = 0x2046 }, ++ { .offset = 97, .value = 0xfe69 }, ++ { .offset = 98, .value = 0x1726 }, ++ { .offset = 99, .value = 0xfa5c }, ++ { .offset = 112, .value = 0x2046 }, ++ { .offset = 113, .value = 0xfea8 }, ++ { .offset = 114, .value = 0x1978 }, ++ { .offset = 115, .value = 0xfa26 }, ++ { .offset = 161, .value = 0x2222 }, ++ { .offset = 169, .value = 0x2222 }, ++ { .offset = 171, .value = 0x2222 }, ++ { .offset = 173, .value = 0x2222 }, ++ { .offset = 174, .value = 0x4444 }, ++ { .offset = 175, .value = 0x2222 }, ++ { .offset = 176, .value = 0x4444 }, ++}; ++ ++static struct board_info __initdata board_AD1018 = { ++ .name = "96328avngr", ++ .expected_cpu_id = 0x6328, ++ ++ .has_uart0 = 1, ++ .has_pci = 1, ++ .use_fallback_sprom = 1, ++ ++ .has_ohci0 = 1, ++ .has_ehci0 = 1, ++ .num_usbh_ports = 1, ++ ++ .has_enetsw = 1, ++ ++ .enetsw = { ++ .used_ports = { ++ [0] = { ++ .used = 1, ++ .phy_id = 1, ++ .name = "FIBRE", ++ }, ++ [1] = { ++ .used = 1, ++ .phy_id = 2, ++ .name = "LAN3", ++ }, ++ [2] = { ++ .used = 1, ++ .phy_id = 3, ++ .name = "LAN2", ++ }, ++ [3] = { ++ .used = 1, ++ .phy_id = 4, ++ .name = "LAN1", ++ }, ++ }, ++ }, ++ ++ .fallback_sprom = { ++ .type = SPROM_BCM43217, ++ .pci_bus = 1, ++ .pci_dev = 0, ++ .board_fixups = ad1018_fixups, ++ .num_board_fixups = ARRAY_SIZE(ad1018_fixups), ++ }, ++}; ++ + static struct sprom_fixup __initdata ar5381u_fixups[] = { + { .offset = 97, .value = 0xfee5 }, + { .offset = 98, .value = 0x157c }, +@@ -2684,6 +2752,7 @@ static const struct board_info __initcon + #endif + #ifdef CONFIG_BCM63XX_CPU_6328 + &board_96328avng, ++ &board_AD1018, + &board_AR5381u, + &board_AR5387un, + &board_963281TAN, +@@ -2798,6 +2867,7 @@ static struct of_device_id const bcm963x + { .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, }, + { .compatible = "nucom,r5010unv2", .data = &board_R5010UNV2, }, + { .compatible = "sagem,f@st2704v2", .data = &board_FAST2704V2, }, ++ { .compatible = "sercomm,ad1018-nor", .data = &board_AD1018, }, + #endif + #ifdef CONFIG_BCM63XX_CPU_6338 + { .compatible = "brcm,bcm96338gw", .data = &board_96338gw, }, |