aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/mvebu/patches-5.10/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch71
-rw-r--r--target/linux/mvebu/patches-5.10/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch35
-rw-r--r--target/linux/mvebu/patches-5.10/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch102
-rw-r--r--target/linux/mvebu/patches-5.10/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch187
4 files changed, 395 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-5.10/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch b/target/linux/mvebu/patches-5.10/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch
new file mode 100644
index 0000000000..8a5f3f3cf4
--- /dev/null
+++ b/target/linux/mvebu/patches-5.10/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch
@@ -0,0 +1,71 @@
+From 75fa71e3acadbb4ab5eda18505277eb9a1f69b23 Mon Sep 17 00:00:00 2001
+From: Maxime Chevallier <maxime.chevallier@bootlin.com>
+Date: Fri, 26 Nov 2021 12:20:53 +0100
+Subject: net: mvneta: Use struct tc_mqprio_qopt_offload for MQPrio
+ configuration
+
+The struct tc_mqprio_qopt_offload is a container for struct tc_mqprio_qopt,
+that allows passing extra parameters, such as traffic shaping. This commit
+converts the current mqprio code to that new struct.
+
+Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/marvell/mvneta.c | 17 ++++++++++-------
+ 1 file changed, 10 insertions(+), 7 deletions(-)
+
+(limited to 'drivers/net/ethernet/marvell/mvneta.c')
+
+diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
+index 80e4b500695e6..46b7604805f76 100644
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -38,6 +38,7 @@
+ #include <net/ipv6.h>
+ #include <net/tso.h>
+ #include <net/page_pool.h>
++#include <net/pkt_cls.h>
+ #include <linux/bpf_trace.h>
+
+ /* Registers */
+@@ -4908,14 +4909,14 @@ static void mvneta_setup_rx_prio_map(struct mvneta_port *pp)
+ }
+
+ static int mvneta_setup_mqprio(struct net_device *dev,
+- struct tc_mqprio_qopt *qopt)
++ struct tc_mqprio_qopt_offload *mqprio)
+ {
+ struct mvneta_port *pp = netdev_priv(dev);
+ u8 num_tc;
+ int i;
+
+- qopt->hw = TC_MQPRIO_HW_OFFLOAD_TCS;
+- num_tc = qopt->num_tc;
++ mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS;
++ num_tc = mqprio->qopt.num_tc;
+
+ if (num_tc > rxq_number)
+ return -EINVAL;
+@@ -4926,13 +4927,15 @@ static int mvneta_setup_mqprio(struct net_device *dev,
+ return 0;
+ }
+
+- memcpy(pp->prio_tc_map, qopt->prio_tc_map, sizeof(pp->prio_tc_map));
++ memcpy(pp->prio_tc_map, mqprio->qopt.prio_tc_map,
++ sizeof(pp->prio_tc_map));
+
+ mvneta_setup_rx_prio_map(pp);
+
+- netdev_set_num_tc(dev, qopt->num_tc);
+- for (i = 0; i < qopt->num_tc; i++)
+- netdev_set_tc_queue(dev, i, qopt->count[i], qopt->offset[i]);
++ netdev_set_num_tc(dev, mqprio->qopt.num_tc);
++ for (i = 0; i < mqprio->qopt.num_tc; i++)
++ netdev_set_tc_queue(dev, i, mqprio->qopt.count[i],
++ mqprio->qopt.offset[i]);
+
+ return 0;
+ }
+--
+cgit 1.2.3-1.el7
+
diff --git a/target/linux/mvebu/patches-5.10/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch b/target/linux/mvebu/patches-5.10/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch
new file mode 100644
index 0000000000..a9bf9b22c3
--- /dev/null
+++ b/target/linux/mvebu/patches-5.10/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch
@@ -0,0 +1,35 @@
+From e7ca75fe6662f78bfeb0112671c812e4c7b8e214 Mon Sep 17 00:00:00 2001
+From: Maxime Chevallier <maxime.chevallier@bootlin.com>
+Date: Fri, 26 Nov 2021 12:20:54 +0100
+Subject: net: mvneta: Don't force-set the offloading flag
+
+The qopt->hw flag is set by the TC code according to the offloading mode
+asked by user. Don't force-set it in the driver, but instead read it to
+make sure we do what's asked.
+
+Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/marvell/mvneta.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+(limited to 'drivers/net/ethernet/marvell/mvneta.c')
+
+diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
+index 46b7604805f76..d3ce87e69d2a8 100644
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -4915,7 +4915,9 @@ static int mvneta_setup_mqprio(struct net_device *dev,
+ u8 num_tc;
+ int i;
+
+- mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS;
++ if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS)
++ return 0;
++
+ num_tc = mqprio->qopt.num_tc;
+
+ if (num_tc > rxq_number)
+--
+cgit 1.2.3-1.el7
+
diff --git a/target/linux/mvebu/patches-5.10/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch b/target/linux/mvebu/patches-5.10/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch
new file mode 100644
index 0000000000..ac5fdc329a
--- /dev/null
+++ b/target/linux/mvebu/patches-5.10/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch
@@ -0,0 +1,102 @@
+From e9f7099d0730341b24c057acbf545dd019581db6 Mon Sep 17 00:00:00 2001
+From: Maxime Chevallier <maxime.chevallier@bootlin.com>
+Date: Fri, 26 Nov 2021 12:20:55 +0100
+Subject: net: mvneta: Allow having more than one queue per TC
+
+The current mqprio implementation assumed that we are only using one
+queue per TC. Use the offset and count parameters to allow using
+multiple queues per TC. In that case, the controller will use a standard
+round-robin algorithm to pick queues assigned to the same TC, with the
+same priority.
+
+This only applies to VLAN priorities in ingress traffic, each TC
+corresponding to a vlan priority.
+
+Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/marvell/mvneta.c | 35 ++++++++++++++++++++---------------
+ 1 file changed, 20 insertions(+), 15 deletions(-)
+
+(limited to 'drivers/net/ethernet/marvell/mvneta.c')
+
+diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
+index d3ce87e69d2a8..aba452e8abfe6 100644
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -493,7 +493,6 @@ struct mvneta_port {
+ u8 mcast_count[256];
+ u16 tx_ring_size;
+ u16 rx_ring_size;
+- u8 prio_tc_map[8];
+
+ phy_interface_t phy_interface;
+ struct device_node *dn;
+@@ -4897,13 +4896,12 @@ static void mvneta_clear_rx_prio_map(struct mvneta_port *pp)
+ mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, 0);
+ }
+
+-static void mvneta_setup_rx_prio_map(struct mvneta_port *pp)
++static void mvneta_map_vlan_prio_to_rxq(struct mvneta_port *pp, u8 pri, u8 rxq)
+ {
+- u32 val = 0;
+- int i;
++ u32 val = mvreg_read(pp, MVNETA_VLAN_PRIO_TO_RXQ);
+
+- for (i = 0; i < rxq_number; i++)
+- val |= MVNETA_VLAN_PRIO_RXQ_MAP(i, pp->prio_tc_map[i]);
++ val &= ~MVNETA_VLAN_PRIO_RXQ_MAP(pri, 0x7);
++ val |= MVNETA_VLAN_PRIO_RXQ_MAP(pri, rxq);
+
+ mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, val);
+ }
+@@ -4912,8 +4910,8 @@ static int mvneta_setup_mqprio(struct net_device *dev,
+ struct tc_mqprio_qopt_offload *mqprio)
+ {
+ struct mvneta_port *pp = netdev_priv(dev);
++ int rxq, tc;
+ u8 num_tc;
+- int i;
+
+ if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS)
+ return 0;
+@@ -4923,21 +4921,28 @@ static int mvneta_setup_mqprio(struct net_device *dev,
+ if (num_tc > rxq_number)
+ return -EINVAL;
+
++ mvneta_clear_rx_prio_map(pp);
++
+ if (!num_tc) {
+- mvneta_clear_rx_prio_map(pp);
+ netdev_reset_tc(dev);
+ return 0;
+ }
+
+- memcpy(pp->prio_tc_map, mqprio->qopt.prio_tc_map,
+- sizeof(pp->prio_tc_map));
++ netdev_set_num_tc(dev, mqprio->qopt.num_tc);
++
++ for (tc = 0; tc < mqprio->qopt.num_tc; tc++) {
++ netdev_set_tc_queue(dev, tc, mqprio->qopt.count[tc],
++ mqprio->qopt.offset[tc]);
+
+- mvneta_setup_rx_prio_map(pp);
++ for (rxq = mqprio->qopt.offset[tc];
++ rxq < mqprio->qopt.count[tc] + mqprio->qopt.offset[tc];
++ rxq++) {
++ if (rxq >= rxq_number)
++ return -EINVAL;
+
+- netdev_set_num_tc(dev, mqprio->qopt.num_tc);
+- for (i = 0; i < mqprio->qopt.num_tc; i++)
+- netdev_set_tc_queue(dev, i, mqprio->qopt.count[i],
+- mqprio->qopt.offset[i]);
++ mvneta_map_vlan_prio_to_rxq(pp, tc, rxq);
++ }
++ }
+
+ return 0;
+ }
+--
+cgit 1.2.3-1.el7
+
diff --git a/target/linux/mvebu/patches-5.10/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch b/target/linux/mvebu/patches-5.10/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch
new file mode 100644
index 0000000000..d2fd1832d8
--- /dev/null
+++ b/target/linux/mvebu/patches-5.10/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch
@@ -0,0 +1,187 @@
+From 2551dc9e398c37a15e52122d385c29a8b06be45f Mon Sep 17 00:00:00 2001
+From: Maxime Chevallier <maxime.chevallier@bootlin.com>
+Date: Fri, 26 Nov 2021 12:20:56 +0100
+Subject: net: mvneta: Add TC traffic shaping offload
+
+The mvneta controller is able to do some tocken-bucket per-queue traffic
+shaping. This commit adds support for setting these using the TC mqprio
+interface.
+
+The token-bucket parameters are customisable, but the current
+implementation configures them to have a 10kbps resolution for the
+rate limitation, since it allows to cover the whole range of max_rate
+values from 10kbps to 5Gbps with 10kbps increments.
+
+Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/marvell/mvneta.c | 120 +++++++++++++++++++++++++++++++++-
+ 1 file changed, 119 insertions(+), 1 deletion(-)
+
+(limited to 'drivers/net/ethernet/marvell/mvneta.c')
+
+diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
+index aba452e8abfe6..2368ae3f0e10d 100644
+--- a/drivers/net/ethernet/marvell/mvneta.c
++++ b/drivers/net/ethernet/marvell/mvneta.c
+@@ -248,12 +248,39 @@
+ #define MVNETA_TXQ_SENT_DESC_MASK 0x3fff0000
+ #define MVNETA_PORT_TX_RESET 0x3cf0
+ #define MVNETA_PORT_TX_DMA_RESET BIT(0)
++#define MVNETA_TXQ_CMD1_REG 0x3e00
++#define MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 BIT(3)
++#define MVNETA_TXQ_CMD1_BW_LIM_EN BIT(0)
++#define MVNETA_REFILL_NUM_CLK_REG 0x3e08
++#define MVNETA_REFILL_MAX_NUM_CLK 0x0000ffff
+ #define MVNETA_TX_MTU 0x3e0c
+ #define MVNETA_TX_TOKEN_SIZE 0x3e14
+ #define MVNETA_TX_TOKEN_SIZE_MAX 0xffffffff
++#define MVNETA_TXQ_BUCKET_REFILL_REG(q) (0x3e20 + ((q) << 2))
++#define MVNETA_TXQ_BUCKET_REFILL_PERIOD_MASK 0x3ff00000
++#define MVNETA_TXQ_BUCKET_REFILL_PERIOD_SHIFT 20
++#define MVNETA_TXQ_BUCKET_REFILL_VALUE_MAX 0x0007ffff
+ #define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2))
+ #define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff
+
++/* The values of the bucket refill base period and refill period are taken from
++ * the reference manual, and adds up to a base resolution of 10Kbps. This allows
++ * to cover all rate-limit values from 10Kbps up to 5Gbps
++ */
++
++/* Base period for the rate limit algorithm */
++#define MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS 100
++
++/* Number of Base Period to wait between each bucket refill */
++#define MVNETA_TXQ_BUCKET_REFILL_PERIOD 1000
++
++/* The base resolution for rate limiting, in bps. Any max_rate value should be
++ * a multiple of that value.
++ */
++#define MVNETA_TXQ_RATE_LIMIT_RESOLUTION (NSEC_PER_SEC / \
++ (MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS * \
++ MVNETA_TXQ_BUCKET_REFILL_PERIOD))
++
+ #define MVNETA_LPI_CTRL_0 0x2cc0
+ #define MVNETA_LPI_CTRL_1 0x2cc4
+ #define MVNETA_LPI_REQUEST_ENABLE BIT(0)
+@@ -4906,11 +4933,74 @@ static void mvneta_map_vlan_prio_to_rxq(struct mvneta_port *pp, u8 pri, u8 rxq)
+ mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, val);
+ }
+
++static int mvneta_enable_per_queue_rate_limit(struct mvneta_port *pp)
++{
++ unsigned long core_clk_rate;
++ u32 refill_cycles;
++ u32 val;
++
++ core_clk_rate = clk_get_rate(pp->clk);
++ if (!core_clk_rate)
++ return -EINVAL;
++
++ refill_cycles = MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS /
++ (NSEC_PER_SEC / core_clk_rate);
++
++ if (refill_cycles > MVNETA_REFILL_MAX_NUM_CLK)
++ return -EINVAL;
++
++ /* Enable bw limit algorithm version 3 */
++ val = mvreg_read(pp, MVNETA_TXQ_CMD1_REG);
++ val &= ~(MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 | MVNETA_TXQ_CMD1_BW_LIM_EN);
++ mvreg_write(pp, MVNETA_TXQ_CMD1_REG, val);
++
++ /* Set the base refill rate */
++ mvreg_write(pp, MVNETA_REFILL_NUM_CLK_REG, refill_cycles);
++
++ return 0;
++}
++
++static void mvneta_disable_per_queue_rate_limit(struct mvneta_port *pp)
++{
++ u32 val = mvreg_read(pp, MVNETA_TXQ_CMD1_REG);
++
++ val |= (MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 | MVNETA_TXQ_CMD1_BW_LIM_EN);
++ mvreg_write(pp, MVNETA_TXQ_CMD1_REG, val);
++}
++
++static int mvneta_setup_queue_rates(struct mvneta_port *pp, int queue,
++ u64 min_rate, u64 max_rate)
++{
++ u32 refill_val, rem;
++ u32 val = 0;
++
++ /* Convert to from Bps to bps */
++ max_rate *= 8;
++
++ if (min_rate)
++ return -EINVAL;
++
++ refill_val = div_u64_rem(max_rate, MVNETA_TXQ_RATE_LIMIT_RESOLUTION,
++ &rem);
++
++ if (rem || !refill_val ||
++ refill_val > MVNETA_TXQ_BUCKET_REFILL_VALUE_MAX)
++ return -EINVAL;
++
++ val = refill_val;
++ val |= (MVNETA_TXQ_BUCKET_REFILL_PERIOD <<
++ MVNETA_TXQ_BUCKET_REFILL_PERIOD_SHIFT);
++
++ mvreg_write(pp, MVNETA_TXQ_BUCKET_REFILL_REG(queue), val);
++
++ return 0;
++}
++
+ static int mvneta_setup_mqprio(struct net_device *dev,
+ struct tc_mqprio_qopt_offload *mqprio)
+ {
+ struct mvneta_port *pp = netdev_priv(dev);
+- int rxq, tc;
++ int rxq, txq, tc, ret;
+ u8 num_tc;
+
+ if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS)
+@@ -4924,6 +5014,7 @@ static int mvneta_setup_mqprio(struct net_device *dev,
+ mvneta_clear_rx_prio_map(pp);
+
+ if (!num_tc) {
++ mvneta_disable_per_queue_rate_limit(pp);
+ netdev_reset_tc(dev);
+ return 0;
+ }
+@@ -4944,6 +5035,33 @@ static int mvneta_setup_mqprio(struct net_device *dev,
+ }
+ }
+
++ if (mqprio->shaper != TC_MQPRIO_SHAPER_BW_RATE) {
++ mvneta_disable_per_queue_rate_limit(pp);
++ return 0;
++ }
++
++ if (mqprio->qopt.num_tc > txq_number)
++ return -EINVAL;
++
++ ret = mvneta_enable_per_queue_rate_limit(pp);
++ if (ret)
++ return ret;
++
++ for (tc = 0; tc < mqprio->qopt.num_tc; tc++) {
++ for (txq = mqprio->qopt.offset[tc];
++ txq < mqprio->qopt.count[tc] + mqprio->qopt.offset[tc];
++ txq++) {
++ if (txq >= txq_number)
++ return -EINVAL;
++
++ ret = mvneta_setup_queue_rates(pp, txq,
++ mqprio->min_rate[tc],
++ mqprio->max_rate[tc]);
++ if (ret)
++ return ret;
++ }
++ }
++
+ return 0;
+ }
+
+--
+cgit 1.2.3-1.el7
+