diff options
Diffstat (limited to 'target/linux')
8 files changed, 5 insertions, 147 deletions
diff --git a/target/linux/brcm2708/patches-4.19/950-0691-media-vb2-set-reqbufs-create_bufs-capabilities.patch b/target/linux/brcm2708/patches-4.19/950-0691-media-vb2-set-reqbufs-create_bufs-capabilities.patch index c08997a3b8..233857f5d1 100644 --- a/target/linux/brcm2708/patches-4.19/950-0691-media-vb2-set-reqbufs-create_bufs-capabilities.patch +++ b/target/linux/brcm2708/patches-4.19/950-0691-media-vb2-set-reqbufs-create_bufs-capabilities.patch @@ -80,7 +80,7 @@ Minor modifications required on the backport * Any -EBUSY result from vb2_verify_memory_type can be mapped to 0. --- a/drivers/media/platform/vim2m.c +++ b/drivers/media/platform/vim2m.c -@@ -841,6 +841,7 @@ static int queue_init(void *priv, struct +@@ -840,6 +840,7 @@ static int queue_init(void *priv, struct src_vq->mem_ops = &vb2_vmalloc_memops; src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY; src_vq->lock = &ctx->dev->dev_mutex; diff --git a/target/linux/gemini/patches-4.19/0008-ARM-dts-Enable-Gemini-flash-access.patch b/target/linux/gemini/patches-4.19/0008-ARM-dts-Enable-Gemini-flash-access.patch index 372242c68b..fab00d25e5 100644 --- a/target/linux/gemini/patches-4.19/0008-ARM-dts-Enable-Gemini-flash-access.patch +++ b/target/linux/gemini/patches-4.19/0008-ARM-dts-Enable-Gemini-flash-access.patch @@ -27,7 +27,7 @@ Signed-off-by: Linus Walleij <linus.walleij@linaro.org> gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>; gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>; - /* Collides with pflash CE1, not so cool */ - cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; num-chipselects = <1>; @@ -253,15 +252,18 @@ diff --git a/target/linux/generic/hack-4.19/204-module_strip.patch b/target/linux/generic/hack-4.19/204-module_strip.patch index c0650b3670..2524307f45 100644 --- a/target/linux/generic/hack-4.19/204-module_strip.patch +++ b/target/linux/generic/hack-4.19/204-module_strip.patch @@ -114,7 +114,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> config MODULES_TREE_LOOKUP --- a/kernel/module.c +++ b/kernel/module.c -@@ -3009,9 +3009,11 @@ static int setup_load_info(struct load_i +@@ -3016,9 +3016,11 @@ static int setup_load_info(struct load_i static int check_modinfo(struct module *mod, struct load_info *info, int flags) { @@ -127,7 +127,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> if (flags & MODULE_INIT_IGNORE_VERMAGIC) modmagic = NULL; -@@ -3032,6 +3034,7 @@ static int check_modinfo(struct module * +@@ -3039,6 +3041,7 @@ static int check_modinfo(struct module * mod->name); add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK); } diff --git a/target/linux/generic/hack-4.19/930-crashlog.patch b/target/linux/generic/hack-4.19/930-crashlog.patch index 0088b7a081..1562df44a4 100644 --- a/target/linux/generic/hack-4.19/930-crashlog.patch +++ b/target/linux/generic/hack-4.19/930-crashlog.patch @@ -280,7 +280,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> +module_init(crashlog_init_fs); --- a/kernel/module.c +++ b/kernel/module.c -@@ -256,6 +256,9 @@ static void mod_update_bounds(struct mod +@@ -251,6 +251,9 @@ static void mod_update_bounds(struct mod #ifdef CONFIG_KGDB_KDB struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */ #endif /* CONFIG_KGDB_KDB */ diff --git a/target/linux/generic/pending-4.19/840-media-i2c-tda1997x-select-V4L2_FWNODE.patch b/target/linux/generic/pending-4.19/840-media-i2c-tda1997x-select-V4L2_FWNODE.patch deleted file mode 100644 index 65fcfb5bfe..0000000000 --- a/target/linux/generic/pending-4.19/840-media-i2c-tda1997x-select-V4L2_FWNODE.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 237e88dcbcb0098e1a8a0887fb7299fcf18650a5 Mon Sep 17 00:00:00 2001 -From: Koen Vandeputte <koen.vandeputte@ncentric.com> -Date: Mon, 18 Mar 2019 17:39:26 +0100 -Subject: [PATCH] media: i2c: tda1997x: select V4L2_FWNODE - -Building tda1997x fails now unless V4L2_FWNODE is selected: - -drivers/media/i2c/tda1997x.o: in function `tda1997x_parse_dt' -undefined reference to `v4l2_fwnode_endpoint_parse' - -While at it, also sort the selections alphabetically - -Fixes: 9ac0038db9a7 ("media: i2c: Add TDA1997x HDMI receiver driver") -Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> -Cc: Akinobu Mita <akinobu.mita@gmail.com> -Cc: Bingbu Cao <bingbu.cao@intel.com> -Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> -Cc: Jacopo Mondi <jacopo+renesas@jmondi.org> -Cc: Matt Ranostay <matt.ranostay@konsulko.com> -Cc: Mauro Carvalho Chehab <mchehab@kernel.org> -Cc: Robin Leblon <robin.leblon@ncentric.com> -Cc: Rui Miguel Silva <rui.silva@linaro.org> -Cc: Sakari Ailus <sakari.ailus@linux.intel.com> -Cc: Tim Harvey <tharvey@gateworks.com> -Cc: linux-kernel@vger.kernel.org -Cc: stable@vger.kernel.org # v4.17+ ---- - drivers/media/i2c/Kconfig | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/media/i2c/Kconfig -+++ b/drivers/media/i2c/Kconfig -@@ -60,8 +60,9 @@ config VIDEO_TDA1997X - tristate "NXP TDA1997x HDMI receiver" - depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API - depends on SND_SOC -- select SND_PCM - select HDMI -+ select SND_PCM -+ select V4L2_FWNODE - ---help--- - V4L2 subdevice driver for the NXP TDA1997x HDMI receivers. - diff --git a/target/linux/ipq40xx/patches-4.19/079-v4.20-ARM-dts-qcom-ipq4019-fix-PCI-range.patch b/target/linux/ipq40xx/patches-4.19/079-v4.20-ARM-dts-qcom-ipq4019-fix-PCI-range.patch deleted file mode 100644 index ecf2a4aefb..0000000000 --- a/target/linux/ipq40xx/patches-4.19/079-v4.20-ARM-dts-qcom-ipq4019-fix-PCI-range.patch +++ /dev/null @@ -1,25 +0,0 @@ -From da89f500cb55fb3f19c4b399b46d8add0abbd4d6 Mon Sep 17 00:00:00 2001 -From: Mathias Kresin <dev@kresin.me> -Date: Wed, 25 Jul 2018 10:37:48 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: fix PCI range - -The PCI range is invalid and PCI attached devices doen't work. - -Signed-off-by: Mathias Kresin <dev@kresin.me> -Signed-off-by: John Crispin <john@phrozen.org> -Signed-off-by: Andy Gross <andy.gross@linaro.org> ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -405,7 +405,7 @@ - #size-cells = <2>; - - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 -- 0x82000000 0 0x48000000 0x48000000 0 0x10000000>; -+ 0x82000000 0 0x40300000 0x40300000 0 0x400000>; - - interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "msi"; diff --git a/target/linux/ipq40xx/patches-4.19/083-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch b/target/linux/ipq40xx/patches-4.19/083-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch deleted file mode 100644 index 1283f93708..0000000000 --- a/target/linux/ipq40xx/patches-4.19/083-ARM-dts-qcom-ipq4019-enlarge-PCIe-BAR-range.patch +++ /dev/null @@ -1,42 +0,0 @@ -From: Christian Lamparter <chunkeey@gmail.com> -Date: Mon, 25 Feb 2019 20:14:19 +0100 -Subject: [PATCH] ARM: dts: qcom: ipq4019: enlarge PCIe BAR range - -David Bauer reported that the VDSL modem (attached via PCIe) -on his AVM Fritz!Box 7530 was complaining about not having -enough space in the BAR. A closer inspection of the old -qcom-ipq40xx.dtsi pulled from the GL-iNet repository listed: - -| qcom,pcie@80000 { -| compatible = "qcom,msm_pcie"; -| reg = <0x80000 0x2000>, -| <0x99000 0x800>, -| <0x40000000 0xf1d>, -| <0x40000f20 0xa8>, -| <0x40100000 0x1000>, -| <0x40200000 0x100000>, -| <0x40300000 0xd00000>; -| reg-names = "parf", "phy", "dm_core", "elbi", -| "conf", "io", "bars"; - -Matching the reg-names with the listed reg leads to -<0xd00000> as the size for the "bars". - -BugLink: https://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg45212.html -Reported-by: David Bauer <mail@david-bauer.net> -Signed-off-by: Christian Lamparter <chunkeey@gmail.com> ---- - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -405,8 +405,8 @@ - #address-cells = <3>; - #size-cells = <2>; - -- ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000 -- 0x82000000 0 0x40300000 0x40300000 0 0x400000>; -+ ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>, -+ <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>; - - interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "msi"; diff --git a/target/linux/ipq40xx/patches-4.19/084-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch b/target/linux/ipq40xx/patches-4.19/084-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch deleted file mode 100644 index b5492c9f98..0000000000 --- a/target/linux/ipq40xx/patches-4.19/084-ARM-dts-qcom-ipq4019-Fix-MSI-IRQ-type.patch +++ /dev/null @@ -1,32 +0,0 @@ -From: Niklas Cassel <niklas.cassel@linaro.org> -Subject: [PATCH] ARM: dts: qcom: ipq4019: Fix MSI IRQ type -Date: Thu, 24 Jan 2019 14:00:47 +0100 - -The databook clearly states that the MSI IRQ (msi_ctrl_int) is a level -triggered interrupt. - -The msi_ctrl_int will be high for as long as any MSI status bit is set, -thus the IRQ type should be set to IRQ_TYPE_LEVEL_HIGH, causing the -IRQ handler to keep getting called, as long as any MSI status bit is set. - -A git grep shows that ipq4019 is the only SoC using snps,dw-pcie that has -configured this IRQ incorrectly. - -Not having the correct IRQ type defined will cause us to lose interrupts, -which in turn causes timeouts in the PCIe endpoint drivers. - -Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> -Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> ---- - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -408,7 +408,7 @@ - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>, - <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>; - -- interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>; -+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; |