diff options
Diffstat (limited to 'target/linux')
| -rw-r--r-- | target/linux/ath79/dts/ar9331_glinet_gl-usb150.dts | 120 | ||||
| -rwxr-xr-x | target/linux/ath79/generic/base-files/etc/board.d/02_network | 1 | ||||
| -rw-r--r-- | target/linux/ath79/image/generic.mk | 9 |
3 files changed, 130 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9331_glinet_gl-usb150.dts b/target/linux/ath79/dts/ar9331_glinet_gl-usb150.dts new file mode 100644 index 0000000000..c75684be04 --- /dev/null +++ b/target/linux/ath79/dts/ar9331_glinet_gl-usb150.dts @@ -0,0 +1,120 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9331.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "glinet,gl-usb150", "qca,ar9331"; + model = "GL.iNet GL-USB150"; + + aliases { + serial0 = &uart; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + label-mac-device = ð0; + }; + + leds { + compatible = "gpio-leds"; + + wlan { + label = "green:wlan"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + led_power: power { + label = "green:power"; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + gpio_lan_reset { + gpio-export,name = "lan:reset"; + gpio-export,output = <0>; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x0>; + + gmac-config { + device = <&gmac>; + switch-phy-addr-swap = <0>; + switch-phy-swap = <0>; + }; +}; + +ð1 { + status = "okay"; + + compatible = "syscon", "simple-mfd"; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <33000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x050000 0xfa0000>; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; + }; + }; + }; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index e42d889847..e3e0547ee7 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -33,6 +33,7 @@ ath79_setup_interfaces() engenius,ecb1750|\ enterasys,ws-ap3705i|\ glinet,gl-ar300m-lite|\ + glinet,gl-usb150|\ hak5,wifi-pineapple-nano|\ meraki,mr16|\ netgear,ex6400|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index e44e780e8c..661d4203ed 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1111,6 +1111,15 @@ define Device/glinet_gl-mifi endef TARGET_DEVICES += glinet_gl-mifi +define Device/glinet_gl-usb150 + SOC := ar9331 + DEVICE_VENDOR := GL.iNET + DEVICE_MODEL := GL-USB150 + IMAGE_SIZE := 16000k + SUPPORTED_DEVICES += gl-usb150 +endef +TARGET_DEVICES += glinet_gl-usb150 + define Device/glinet_gl-x750 SOC := qca9531 DEVICE_VENDOR := GL.iNet |