diff options
Diffstat (limited to 'target/linux')
4 files changed, 165 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts b/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts new file mode 100644 index 0000000000..49eeb46d5f --- /dev/null +++ b/target/linux/ramips/dts/mt7621_glinet_gl-mt1300.dts @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "glinet,gl-mt1300", "mediatek,mt7621-soc"; + model = "GL.iNet GL-MT1300"; + + aliases { + led-boot = &led_run; + led-failsafe = &led_run; + led-running = &led_run; + led-upgrade = &led_run; + label-mac-device = &wan; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + switch { + label = "switch"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + linux,input-type = <EV_SW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_run: run { + label = "blue:run"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + + system { + label = "white:system"; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&i2c { + status = "okay"; +}; + +&sdhci { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "mx25l25635f", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <80000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0x1fb0000>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + }; +}; + +&gmac0 { + mtd-mac-address = <&factory 0x4000>; + mtd-mac-address-increment = <1>; +}; + +&switch0 { + ports { + port@2 { + status = "okay"; + label = "lan1"; + }; + + port@3 { + status = "okay"; + label = "lan2"; + }; + + wan: port@4 { + status = "okay"; + label = "wan"; + mtd-mac-address = <&factory 0x4000>; + }; + }; +}; + +&uartlite3 { + status = "okay"; +}; + +&state_default { + gpio { + group = "wdt", "jtag"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index fad18552c9..282152e79d 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -475,6 +475,15 @@ define Device/gehua_ghl-r-001 endef TARGET_DEVICES += gehua_ghl-r-001 +define Device/glinet_gl-mt1300 + $(Device/dsa-migration) + IMAGE_SIZE := 32448k + DEVICE_VENDOR := GL.iNet + DEVICE_MODEL := GL-MT1300 + DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 +endef +TARGET_DEVICES += glinet_gl-mt1300 + define Device/gnubee_gb-pc1 $(Device/dsa-migration) DEVICE_VENDOR := GnuBee diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index c5b35145f1..bca4cc23dc 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -14,6 +14,7 @@ ramips_setup_interfaces() ucidef_set_interfaces_lan_wan "lan" "wan" ;; asiarf,ap7621-nv1|\ + glinet,gl-mt1300|\ lenovo,newifi-d1|\ mikrotik,routerboard-m33g|\ xiaomi,mi-router-3g|\ diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index b7a41f038c..e7f778aaf8 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -10,6 +10,10 @@ PHYNBR=${DEVPATH##*/phy} board=$(board_name) case "$board" in + glinet,gl-mt1300) + [ "$PHYNBR" = "1" ] && \ + macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress + ;; linksys,ea7300-v1|\ linksys,ea7300-v2|\ linksys,ea7500-v2) |