diff options
Diffstat (limited to 'target/linux')
6 files changed, 25 insertions, 15 deletions
diff --git a/target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts b/target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts index 804b71170e..3e6dd2daea 100644 --- a/target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts +++ b/target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts @@ -110,7 +110,7 @@ &mdio0 { status = "okay"; - phy0: ethernet-phy@c { + phy12: ethernet-phy@c { reg = <0xc>; phy-mode = "mii"; }; @@ -122,7 +122,7 @@ phy-mode = "mii"; mtd-mac-address = <&uboot 0x1fc00>; - phy-handle = <&phy0>; + phy-handle = <&phy12>; }; &wmac { diff --git a/target/linux/ath79/dts/ar9342_ubnt_nanostation-m-xw.dts b/target/linux/ath79/dts/ar9342_ubnt_nanostation-m-xw.dts index 6ac79b0c1e..eac2a4268a 100644 --- a/target/linux/ath79/dts/ar9342_ubnt_nanostation-m-xw.dts +++ b/target/linux/ath79/dts/ar9342_ubnt_nanostation-m-xw.dts @@ -17,7 +17,7 @@ phy4-mii-enable; phy-mask = <0x23>; - phy4: ethernet-phy@0 { + phy0: ethernet-phy@0 { reg = <0>; phy-mode = "mii"; }; @@ -27,7 +27,7 @@ status = "okay"; phy-mode = "mii"; - phy-handle = <&phy4>; + phy-handle = <&phy0>; gmac-config { device = <&gmac>; diff --git a/target/linux/ath79/dts/qca9558_tplink_re350k-v1.dts b/target/linux/ath79/dts/qca9558_tplink_re350k-v1.dts index a797750e7e..f802de271e 100644 --- a/target/linux/ath79/dts/qca9558_tplink_re350k-v1.dts +++ b/target/linux/ath79/dts/qca9558_tplink_re350k-v1.dts @@ -88,7 +88,7 @@ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>, <&gpio 18 GPIO_ACTIVE_HIGH>; - phy0: ethernet-phy@4 { + phy4: ethernet-phy@4 { reg = <4>; phy-mode = "rgmii-rxid"; @@ -101,9 +101,10 @@ ð0 { status = "okay"; - mtd-mac-address = <&config 0x10008>; + phy-handle = <&phy4>; pll-data = <0x9e000000 0x80000101 0x80001313>; - phy-handle = <&phy0>; + + mtd-mac-address = <&config 0x10008>; gmac-config { device = <&gmac>; diff --git a/target/linux/ath79/dts/qca9558_tplink_rex5x.dtsi b/target/linux/ath79/dts/qca9558_tplink_rex5x.dtsi index 17e172d547..8827990eb5 100644 --- a/target/linux/ath79/dts/qca9558_tplink_rex5x.dtsi +++ b/target/linux/ath79/dts/qca9558_tplink_rex5x.dtsi @@ -93,7 +93,7 @@ #address-cells = <1>; #size-cells = <0>; - phy0: ethernet-phy@4 { + phy4: ethernet-phy@4 { reg = <4>; reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; @@ -167,13 +167,16 @@ ð0 { status = "okay"; - mtd-mac-address = <&info 0x8>; + + phy-handle = <&phy4>; pll-data = <0xa6000000 0x00000101 0x00001616>; - phy-handle = <&phy0>; + + mtd-mac-address = <&info 0x8>; }; &wmac { status = "okay"; + mtd-cal-data = <&art 0x1000>; mtd-mac-address = <&info 0x8>; mtd-mac-address-increment = <(-1)>; diff --git a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts index 5a896d52bc..4ad65c31e8 100644 --- a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts +++ b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts @@ -200,8 +200,8 @@ &mdio0 { status = "okay"; - phy0: ethernet-phy@0 { - reg = <17>; + phy17: ethernet-phy@11 { + reg = <0x11>; phy-mode = "rgmii-id"; }; @@ -236,7 +236,8 @@ status = "okay"; pll-data = <0xa6000000 0x00000101 0x00001616>; - phy-handle = <&phy0>; + phy-handle = <&phy17>; + fixed-link { speed = <1000>; full-duplex; @@ -248,6 +249,7 @@ pll-data = <0x03000101 0x00000101 0x00001616>; phy-handle = <&phy1>; + fixed-link { speed = <1000>; full-duplex; diff --git a/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts b/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts index 464be73449..28fefe224d 100644 --- a/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts +++ b/target/linux/ath79/dts/qca9563_tplink_re450-v2.dts @@ -103,7 +103,7 @@ #address-cells = <1>; #size-cells = <0>; - phy0: ethernet-phy@4 { + phy4: ethernet-phy@4 { reg = <4>; device_type = "ethernet-phy"; reset-gpios = <&gpio 11 GPIO_ACTIVE_LOW>; @@ -125,6 +125,7 @@ &spi { status = "okay"; + num-cs = <1>; flash@0 { @@ -178,12 +179,15 @@ ð0 { status = "okay"; + + phy-handle = <&phy4>; + mtd-mac-address = <&info 0x8>; - phy-handle = <&phy0>; }; &wmac { status = "okay"; + mtd-cal-data = <&art 0x1000>; mtd-mac-address = <&info 0x8>; }; |