aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/at91/Makefile2
-rw-r--r--target/linux/at91/patches-5.10/102-dt-bindings-clock-at91-add-sama7g5-pll-defines.patch72
-rw-r--r--target/linux/at91/patches-5.10/103-clk-at91-sama7g5-allow-SYS-and-CPU-PLLs-to-be-export.patch46
-rw-r--r--target/linux/at91/patches-5.10/104-clk-at91-clk-master-add-5th-divisor-for-mck-master.patch49
-rw-r--r--target/linux/at91/patches-5.10/105-clk-at91-sama7g5-add-5th-divisor-for-mck0-layout-and.patch41
-rw-r--r--target/linux/at91/patches-5.10/106-clk-at91-clk-sam9x60-pll-allow-runtime-changes-for-p.patch521
-rw-r--r--target/linux/at91/patches-5.10/107-clk-at91-sama7g5-remove-mck0-from-parent-list-of-oth.patch201
-rw-r--r--target/linux/at91/patches-5.10/108-clk-at91-sama7g5-decrease-lower-limit-for-MCK0-rate.patch35
-rw-r--r--target/linux/at91/patches-5.10/109-clk-at91-sama7g5-do-not-allow-cpu-pll-to-go-higher-t.patch226
-rw-r--r--target/linux/at91/patches-5.10/110-clk-at91-clk-master-re-factor-master-clock.patch1261
-rw-r--r--target/linux/at91/patches-5.10/111-clk-at91-sama7g5-register-cpu-clock.patch72
-rw-r--r--target/linux/at91/patches-5.10/112-clk-at91-Fix-the-declaration-of-the-clocks.patch202
-rw-r--r--target/linux/at91/patches-5.10/113-clk-at91-Trivial-typo-fixes-in-the-file-sama7g5.c.patch50
-rw-r--r--target/linux/at91/patches-5.10/114-clk-at91-sama7g5-remove-all-kernel-doc-kernel-doc-wa.patch95
-rw-r--r--target/linux/at91/patches-5.10/115-net-macb-add-userio-bits-as-platform-configuration.patch186
-rw-r--r--target/linux/at91/patches-5.10/116-net-macb-add-capability-to-not-set-the-clock-rate.patch92
-rw-r--r--target/linux/at91/patches-5.10/117-net-macb-add-function-to-disable-all-macb-clocks.patch87
-rw-r--r--target/linux/at91/patches-5.10/118-net-macb-unprepare-clocks-in-case-of-failure.patch65
-rw-r--r--target/linux/at91/patches-5.10/119-net-macb-add-support-for-sama7g5-gem-interface.patch59
-rw-r--r--target/linux/at91/patches-5.10/120-net-macb-add-support-for-sama7g5-emac-interface.patch44
-rw-r--r--target/linux/at91/patches-5.10/121-ASoC-pcm5102a-Make-codec-selectable.patch33
-rw-r--r--target/linux/at91/patches-5.10/122-ASoC-atmel-i2s-do-not-warn-if-muxclk-is-missing.patch35
-rw-r--r--target/linux/at91/patches-5.10/123-regulator-mcp16502-add-linear_min_sel.patch30
-rw-r--r--target/linux/at91/patches-5.10/124-regulator-mcp16502-adapt-for-get-set-on-other-regist.patch122
-rw-r--r--target/linux/at91/patches-5.10/125-regulator-mcp16502-add-support-for-ramp-delay.patch146
-rw-r--r--target/linux/at91/patches-5.10/126-regulator-mcp16502-remove-void-documentation-of-stru.patch32
-rw-r--r--target/linux/at91/patches-5.10/127-regulator-core-validate-selector-against-linear_min_.patch71
-rw-r--r--target/linux/at91/patches-5.10/128-regulator-core-do-not-continue-if-selector-match.patch31
-rw-r--r--target/linux/at91/patches-5.10/129-regulator-core-return-zero-for-selectors-lower-than-.patch71
-rw-r--r--target/linux/at91/patches-5.10/130-regulator-mcp16502-lpm-pin-can-be-optional-on-some-p.patch35
-rw-r--r--target/linux/at91/patches-5.10/131-pinctrl-at91-pio4-add-support-for-fewer-lines-on-las.patch75
-rw-r--r--target/linux/at91/patches-5.10/132-dmaengine-at_xdmac-adapt-perid-for-mem2mem-operation.patch55
-rw-r--r--target/linux/at91/patches-5.10/133-dmaengine-at_xdmac-add-support-for-sama7g5-based-at_.patch285
-rw-r--r--target/linux/at91/patches-5.10/134-dmaengine-at_xdmac-add-AXI-priority-support-and-reco.patch118
-rw-r--r--target/linux/at91/patches-5.10/135-net-macb-Correct-usage-of-MACB_CAPS_CLK_HW_CHG-flag.patch50
-rw-r--r--target/linux/at91/patches-5.10/136-ARM-at91-sam9x60-SiP-types-added-to-soc-description.patch50
-rw-r--r--target/linux/at91/patches-5.10/137-drivers-soc-atmel-use-GENMASK.patch30
-rw-r--r--target/linux/at91/patches-5.10/138-drivers-soc-atmel-fix-__initconst-should-be-placed-a.patch31
-rw-r--r--target/linux/at91/patches-5.10/139-drivers-soc-atmel-add-per-soc-id-and-version-match-m.patch355
-rw-r--r--target/linux/at91/patches-5.10/140-drivers-soc-atmel-add-support-for-sama7g5.patch94
-rw-r--r--target/linux/at91/patches-5.10/141-drivers-soc-atmel-add-spdx-license-identifier.patch56
-rw-r--r--target/linux/at91/patches-5.10/142-drivers-soc-atmel-fix-type-for-same7.patch33
-rw-r--r--target/linux/at91/patches-5.10/143-clocksource-drivers-timer-microchip-pit64b-Add-clock.patch178
-rw-r--r--target/linux/at91/patches-5.10/144-ASoC-atmel-pdc-Use-managed-DMA-buffer-allocation.patch140
-rw-r--r--target/linux/at91/patches-5.10/145-power-reset-at91-sama5d2_shdwc-add-support-for-sama7.patch146
-rw-r--r--target/linux/at91/patches-5.10/146-pinctrl-at91-pio4-add-support-for-slew-rate.patch126
-rw-r--r--target/linux/at91/patches-5.10/147-pinctrl-at91-pio4-fix-Prefer-unsigned-int-to-bare-us.patch345
-rw-r--r--target/linux/at91/patches-5.10/148-net-macb-Add-default-usrio-config-to-default-gem-con.patch63
-rw-r--r--target/linux/at91/patches-5.10/149-ARM-at91-pm-Move-prototypes-to-mutually-included-hea.patch118
-rw-r--r--target/linux/at91/patches-5.10/150-ASoC-mchp-i2s-mcc-Add-compatible-for-SAMA7G5.patch53
-rw-r--r--target/linux/at91/patches-5.10/151-ASoC-mchp-i2s-mcc-Add-multi-channel-support-for-I2S-.patch118
-rw-r--r--target/linux/at91/patches-5.10/152-ASoC-mchp-i2s-mcc-Add-support-to-select-TDM-pins.patch113
-rw-r--r--target/linux/at91/patches-5.10/153-ASoC-mchp-i2s-mcc-Add-FIFOs-support.patch192
-rw-r--r--target/linux/at91/patches-5.10/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch54
-rw-r--r--target/linux/at91/patches-5.10/155-media-atmel-properly-get-pm_runtime.patch166
-rw-r--r--target/linux/at91/patches-5.10/156-media-atmel-atmel-isc-Remove-redundant-assignment-to.patch37
-rw-r--r--target/linux/at91/patches-5.10/157-media-atmel-atmel-isc-specialize-gamma-table-into-pr.patch196
-rw-r--r--target/linux/at91/patches-5.10/158-media-atmel-atmel-isc-specialize-driver-name-constan.patch79
-rw-r--r--target/linux/at91/patches-5.10/159-media-atmel-atmel-isc-add-checks-for-limiting-frame-.patch50
-rw-r--r--target/linux/at91/patches-5.10/160-media-atmel-atmel-isc-specialize-max-width-and-max-h.patch140
-rw-r--r--target/linux/at91/patches-5.10/161-media-atmel-atmel-isc-specialize-dma-cfg.patch69
-rw-r--r--target/linux/at91/patches-5.10/162-media-atmel-atmel-isc-extract-CSC-submodule-config-i.patch103
-rw-r--r--target/linux/at91/patches-5.10/163-media-atmel-atmel-isc-base-add-id-to-clock-debug-mes.patch33
-rw-r--r--target/linux/at91/patches-5.10/164-media-atmel-atmel-isc-create-register-offsets-struct.patch126
-rw-r--r--target/linux/at91/patches-5.10/165-media-atmel-atmel-isc-extract-CBC-submodule-config-i.patch89
-rw-r--r--target/linux/at91/patches-5.10/166-media-atmel-atmel-isc-add-CBC-to-the-reg-offsets-str.patch93
-rw-r--r--target/linux/at91/patches-5.10/167-media-atmel-atmel-isc-add-SUB422-and-SUB420-to-regis.patch91
-rw-r--r--target/linux/at91/patches-5.10/168-media-atmel-atmel-isc-add-RLP-to-register-offsets.patch85
-rw-r--r--target/linux/at91/patches-5.10/169-media-atmel-atmel-isc-add-HIS-to-register-offsets.patch110
-rw-r--r--target/linux/at91/patches-5.10/170-media-atmel-atmel-isc-add-DMA-to-register-offsets.patch121
-rw-r--r--target/linux/at91/patches-5.10/171-media-atmel-atmel-isc-add-support-for-version-regist.patch86
-rw-r--r--target/linux/at91/patches-5.10/172-media-atmel-atmel-isc-add-his_entry-to-register-offs.patch82
-rw-r--r--target/linux/at91/patches-5.10/173-media-atmel-atmel-isc-add-register-description-for-a.patch104
-rw-r--r--target/linux/at91/patches-5.10/174-media-atmel-atmel-isc-extend-pipeline-with-extra-mod.patch111
-rw-r--r--target/linux/at91/patches-5.10/175-media-atmel-atmel-isc-add-CC-initialization-function.patch92
-rw-r--r--target/linux/at91/patches-5.10/176-media-atmel-atmel-isc-create-product-specific-v4l2-c.patch95
-rw-r--r--target/linux/at91/patches-5.10/177-media-atmel-atmel-isc-create-callback-for-DPC-submod.patch84
-rw-r--r--target/linux/at91/patches-5.10/178-media-atmel-atmel-isc-create-callback-for-GAM-submod.patch84
-rw-r--r--target/linux/at91/patches-5.10/179-media-atmel-atmel-isc-create-callback-for-RLP-submod.patch104
-rw-r--r--target/linux/at91/patches-5.10/180-media-atmel-atmel-isc-move-the-formats-list-into-pro.patch449
-rw-r--r--target/linux/at91/patches-5.10/181-media-atmel-atmel-isc-create-an-adapt-pipeline-callb.patch98
-rw-r--r--target/linux/at91/patches-5.10/182-media-atmel-atmel-isc-regs-add-additional-fields-for.patch60
-rw-r--r--target/linux/at91/patches-5.10/183-media-atmel-atmel-isc-base-add-support-for-more-form.patch150
-rw-r--r--target/linux/at91/patches-5.10/184-media-atmel-atmel-isc-sama5d2-remove-duplicate-defin.patch31
-rw-r--r--target/linux/at91/patches-5.10/185-media-atmel-atmel-isc-add-microchip-xisc-driver.patch826
-rw-r--r--target/linux/at91/patches-5.10/186-ASoC-atmel-fix-shadowed-variable.patch53
-rw-r--r--target/linux/at91/patches-5.10/187-ASoC-atmel-atmel-i2s-remove-useless-initialization.patch41
-rw-r--r--target/linux/at91/patches-5.10/188-ASoC-atmel-i2s-Set-symmetric-sample-bits.patch31
-rw-r--r--target/linux/at91/patches-5.10/189-watchdog-sama5d4_wdt-add-support-for-sama7g5-wdt.patch51
-rw-r--r--target/linux/at91/patches-5.10/190-media-atmel-fix-build-when-ISC-m-and-XISC-y.patch144
-rw-r--r--target/linux/at91/patches-5.10/191-i2c-at91-remove-define-CONFIG_PM.patch81
-rw-r--r--target/linux/at91/patches-5.10/192-ASoC-codecs-ad193x-add-support-for-96kHz-and-192kHz-.patch98
-rw-r--r--target/linux/at91/patches-5.10/193-media-atmel-atmel-sama5d2-isc-fix-YUYV-format.patch53
-rw-r--r--target/linux/at91/patches-5.10/194-clk-at91-add-register-definition-for-sama7g5-s-maste.patch56
-rw-r--r--target/linux/at91/patches-5.10/195-ARM-at91-add-new-SoC-sama7g5.patch54
-rw-r--r--target/linux/at91/patches-5.10/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch55
-rw-r--r--target/linux/at91/patches-5.10/197-ARM-at91-pm-move-pm_bu-to-soc_pm-data-structure.patch92
-rw-r--r--target/linux/at91/patches-5.10/198-ARM-at91-pm-move-the-setup-of-soc_pm.bu-suspended.patch60
-rw-r--r--target/linux/at91/patches-5.10/199-ARM-at91-pm-document-at91_soc_pm-structure.patch36
-rw-r--r--target/linux/at91/patches-5.10/200-ARM-at91-pm-check-for-different-controllers-in-at91_.patch243
-rw-r--r--target/linux/at91/patches-5.10/201-ARM-at91-pm-do-not-initialize-pdev.patch30
-rw-r--r--target/linux/at91/patches-5.10/202-ARM-at91-pm-use-r7-instead-of-tmp1.patch65
-rw-r--r--target/linux/at91/patches-5.10/203-ARM-at91-pm-avoid-push-and-pop-on-stack-while-memory.patch472
-rw-r--r--target/linux/at91/patches-5.10/204-ARM-at91-pm-s-CONFIG_SOC_SAM9X60-CONFIG_HAVE_AT91_SA.patch41
-rw-r--r--target/linux/at91/patches-5.10/205-ARM-at91-pm-add-support-for-waiting-MCK1.4.patch155
-rw-r--r--target/linux/at91/patches-5.10/206-ARM-at91-sfrbu-add-sfrbu-registers-definitions-for-s.patch59
-rw-r--r--target/linux/at91/patches-5.10/207-ARM-at91-ddr-add-registers-definitions-for-sama7g5-s.patch105
-rw-r--r--target/linux/at91/patches-5.10/208-ARM-at91-pm-add-self-refresh-support-for-sama7g5.patch283
-rw-r--r--target/linux/at91/patches-5.10/209-ARM-at91-pm-add-support-for-MCK1.4-save-restore-for-.patch170
-rw-r--r--target/linux/at91/patches-5.10/210-ARM-at91-pm-add-support-for-2.5V-LDO-regulator-contr.patch86
-rw-r--r--target/linux/at91/patches-5.10/211-ARM-at91-pm-wait-for-ddr-power-mode-off.patch33
-rw-r--r--target/linux/at91/patches-5.10/212-ARM-at91-pm-add-sama7g5-ddr-controller.patch45
-rw-r--r--target/linux/at91/patches-5.10/213-ARM-at91-pm-add-sama7g5-ddr-phy-controller.patch99
-rw-r--r--target/linux/at91/patches-5.10/214-ARM-at91-pm-save-ddr-phy-calibration-data-to-securam.patch156
-rw-r--r--target/linux/at91/patches-5.10/215-ARM-at91-pm-add-backup-mode-support-for-SAMA7G5.patch59
-rw-r--r--target/linux/at91/patches-5.10/216-ARM-at91-pm-add-sama7g5-s-pmc.patch41
-rw-r--r--target/linux/at91/patches-5.10/217-ARM-at91-sama7-introduce-sama7-SoC-family.patch71
-rw-r--r--target/linux/at91/patches-5.10/218-ARM-at91-pm-add-pm-support-for-SAMA7G5.patch105
-rw-r--r--target/linux/at91/patches-5.10/219-ARM-at91-pm-add-sama7g5-shdwc.patch29
-rw-r--r--target/linux/at91/patches-5.10/220-ARM-configs-at91-add-defconfig-for-sama7-family-of-S.patch239
-rw-r--r--target/linux/at91/patches-5.10/221-ARM-multi_v7_defconfig-add-sama7g5-SoC.patch38
-rw-r--r--target/linux/at91/patches-5.10/222-ARM-dts-at91-add-sama7g5-SoC-DT-and-sama7g5-ek.patch2168
-rw-r--r--target/linux/at91/patches-5.10/223-ARM-at91-pm-do-not-panic-if-ram-controllers-are-not-.patch79
-rw-r--r--target/linux/at91/patches-5.10/224-ARM-dts-at91-sama7g5-add-ram-controllers.patch41
-rw-r--r--target/linux/at91/patches-5.10/225-ARM-dts-at91-sama7g5-add-securam-node.patch39
-rw-r--r--target/linux/at91/patches-5.10/226-ARM-dts-at91-sama7g5-add-shdwc-node.patch60
-rw-r--r--target/linux/at91/patches-5.10/227-ARM-dts-at91-sama7g5-add-chipid.patch33
-rw-r--r--target/linux/at91/patches-5.10/228-ARM-at91-pm-switch-backup-area-to-vbat-in-backup-mod.patch122
-rw-r--r--target/linux/at91/patches-5.10/229-ARM-dts-at91-sama7g5ek-add-suspend-voltage-for-ddr3l.patch47
-rw-r--r--target/linux/at91/patches-5.10/230-ARM-at91-pm-group-constants-and-addresses-loading.patch53
-rw-r--r--target/linux/at91/patches-5.10/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch98
-rw-r--r--target/linux/at91/patches-5.10/232-ARM-dts-at91-sama7g5ek-use-proper-slew-rate-settings.patch90
-rw-r--r--target/linux/at91/patches-5.10/233-ARM-dts-at91-sama7g5ek-to-not-touch-slew-rate-for-SD.patch78
-rw-r--r--target/linux/at91/patches-5.10/234-clk-at91-re-factor-clocks-suspend-resume.patch1369
-rw-r--r--target/linux/at91/patches-5.10/235-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch94
-rw-r--r--target/linux/at91/patches-5.10/236-clk-at91-sama7g5-add-securam-s-peripheral-clock.patch30
-rw-r--r--target/linux/at91/patches-5.10/237-clk-at91-clk-master-add-register-definition-for-sama.patch129
-rw-r--r--target/linux/at91/patches-5.10/238-clk-at91-clk-master-improve-readability-by-using-loc.patch45
-rw-r--r--target/linux/at91/patches-5.10/239-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch44
-rw-r--r--target/linux/at91/patches-5.10/240-clk-at91-clk-master-check-if-div-or-pres-is-zero.patch44
-rw-r--r--target/linux/at91/patches-5.10/241-clk-at91-clk-master-mask-mckr-against-layout-mask.patch51
-rw-r--r--target/linux/at91/patches-5.10/242-clk-at91-clk-master-fix-prescaler-logic.patch34
-rw-r--r--target/linux/at91/patches-5.10/243-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch323
-rw-r--r--target/linux/at91/patches-5.10/244-clk-at91-clk-master-add-notifier-for-divider.patch548
-rw-r--r--target/linux/at91/patches-5.10/245-clk-at91-sama7g5-remove-prescaler-part-of-master-clo.patch50
-rw-r--r--target/linux/at91/patches-5.10/246-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch31
-rw-r--r--target/linux/at91/patches-5.10/247-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch37
-rw-r--r--target/linux/at91/patches-5.10/99-scripts-fix-compilation-error.patch26
-rw-r--r--target/linux/at91/sam9x/config-default3
-rw-r--r--target/linux/at91/sama5/config-default7
-rw-r--r--target/linux/at91/sama7/config-default476
-rw-r--r--target/linux/at91/sama7/target.mk9
152 files changed, 20714 insertions, 7 deletions
diff --git a/target/linux/at91/Makefile b/target/linux/at91/Makefile
index e4da7fb7e7..36804a1eeb 100644
--- a/target/linux/at91/Makefile
+++ b/target/linux/at91/Makefile
@@ -8,7 +8,7 @@ ARCH:=arm
BOARD:=at91
BOARDNAME:=Microchip (Atmel AT91)
FEATURES:=ext4 squashfs targz usb usbgadget ubifs
-SUBTARGETS:=sama5 sam9x
+SUBTARGETS:=sama7 sama5 sam9x
KERNEL_PATCHVER:=5.10
diff --git a/target/linux/at91/patches-5.10/102-dt-bindings-clock-at91-add-sama7g5-pll-defines.patch b/target/linux/at91/patches-5.10/102-dt-bindings-clock-at91-add-sama7g5-pll-defines.patch
new file mode 100644
index 0000000000..2f2e6641a4
--- /dev/null
+++ b/target/linux/at91/patches-5.10/102-dt-bindings-clock-at91-add-sama7g5-pll-defines.patch
@@ -0,0 +1,72 @@
+From 44bb7c72cdd830f54fe18e730205f892d9cbfe39 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Thu, 19 Nov 2020 17:43:08 +0200
+Subject: [PATCH 102/247] dt-bindings: clock: at91: add sama7g5 pll defines
+
+Add SAMA7G5 specific PLL defines to be referenced in a phandle as a
+PMC_TYPE_CORE clock.
+
+Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+[claudiu.beznea@microchip.com: adapt comit message, adapt sama7g5.c]
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605800597-16720-3-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/sama7g5.c | 6 +++---
+ include/dt-bindings/clock/at91.h | 10 ++++++++++
+ 2 files changed, 13 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index a092a940baa4..7ef7963126b6 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -182,13 +182,13 @@ static const struct {
+ .p = "audiopll_fracck",
+ .l = &pll_layout_divpmc,
+ .t = PLL_TYPE_DIV,
+- .eid = PMC_I2S0_MUX, },
++ .eid = PMC_AUDIOPMCPLL, },
+
+ { .n = "audiopll_diviock",
+ .p = "audiopll_fracck",
+ .l = &pll_layout_divio,
+ .t = PLL_TYPE_DIV,
+- .eid = PMC_I2S1_MUX, },
++ .eid = PMC_AUDIOIOPLL, },
+ },
+
+ [PLL_ID_ETH] = {
+@@ -835,7 +835,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ if (IS_ERR(regmap))
+ return;
+
+- sama7g5_pmc = pmc_data_allocate(PMC_I2S1_MUX + 1,
++ sama7g5_pmc = pmc_data_allocate(PMC_ETHPLL + 1,
+ nck(sama7g5_systemck),
+ nck(sama7g5_periphck),
+ nck(sama7g5_gck), 8);
+diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91.h
+index eba17106608b..fab313f62e8f 100644
+--- a/include/dt-bindings/clock/at91.h
++++ b/include/dt-bindings/clock/at91.h
+@@ -25,6 +25,16 @@
+ #define PMC_PLLBCK 8
+ #define PMC_AUDIOPLLCK 9
+
++/* SAMA7G5 */
++#define PMC_CPUPLL (PMC_MAIN + 1)
++#define PMC_SYSPLL (PMC_MAIN + 2)
++#define PMC_DDRPLL (PMC_MAIN + 3)
++#define PMC_IMGPLL (PMC_MAIN + 4)
++#define PMC_BAUDPLL (PMC_MAIN + 5)
++#define PMC_AUDIOPMCPLL (PMC_MAIN + 6)
++#define PMC_AUDIOIOPLL (PMC_MAIN + 7)
++#define PMC_ETHPLL (PMC_MAIN + 8)
++
+ #ifndef AT91_PMC_MOSCS
+ #define AT91_PMC_MOSCS 0 /* MOSCS Flag */
+ #define AT91_PMC_LOCKA 1 /* PLLA Lock */
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/103-clk-at91-sama7g5-allow-SYS-and-CPU-PLLs-to-be-export.patch b/target/linux/at91/patches-5.10/103-clk-at91-sama7g5-allow-SYS-and-CPU-PLLs-to-be-export.patch
new file mode 100644
index 0000000000..312e6466cc
--- /dev/null
+++ b/target/linux/at91/patches-5.10/103-clk-at91-sama7g5-allow-SYS-and-CPU-PLLs-to-be-export.patch
@@ -0,0 +1,46 @@
+From 55c14526f970805a6bf2ed4b820f062334375abe Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Thu, 19 Nov 2020 17:43:09 +0200
+Subject: [PATCH 103/247] clk: at91: sama7g5: allow SYS and CPU PLLs to be
+ exported and referenced in DT
+
+Allow SYSPLL and CPUPLL to be referenced as a PMC_TYPE_CORE clock
+from phandle in DT.
+
+Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+[claudiu.beznea@microchip.com: adapt commit message, add CPU PLL]
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605800597-16720-4-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/sama7g5.c | 6 ++++--
+ 1 file changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index 7ef7963126b6..d3c3469d47d9 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -117,7 +117,8 @@ static const struct {
+ .p = "cpupll_fracck",
+ .l = &pll_layout_divpmc,
+ .t = PLL_TYPE_DIV,
+- .c = 1, },
++ .c = 1,
++ .eid = PMC_CPUPLL, },
+ },
+
+ [PLL_ID_SYS] = {
+@@ -131,7 +132,8 @@ static const struct {
+ .p = "syspll_fracck",
+ .l = &pll_layout_divpmc,
+ .t = PLL_TYPE_DIV,
+- .c = 1, },
++ .c = 1,
++ .eid = PMC_SYSPLL, },
+ },
+
+ [PLL_ID_DDR] = {
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/104-clk-at91-clk-master-add-5th-divisor-for-mck-master.patch b/target/linux/at91/patches-5.10/104-clk-at91-clk-master-add-5th-divisor-for-mck-master.patch
new file mode 100644
index 0000000000..f01d6f4b3a
--- /dev/null
+++ b/target/linux/at91/patches-5.10/104-clk-at91-clk-master-add-5th-divisor-for-mck-master.patch
@@ -0,0 +1,49 @@
+From b2349278894bb381fa26a8717d3093d53f08fd36 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Thu, 19 Nov 2020 17:43:10 +0200
+Subject: [PATCH 104/247] clk: at91: clk-master: add 5th divisor for mck master
+
+clk-master can have 5 divisors with a field width of 3 bits
+on some products.
+
+Change the mask and number of divisors accordingly.
+
+Reported-by: Mihai Sain <mihai.sain@microchip.com>
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605800597-16720-5-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/clk-master.c | 2 +-
+ drivers/clk/at91/pmc.h | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
+index bd0d8a69a2cf..aafd003b30cf 100644
+--- a/drivers/clk/at91/clk-master.c
++++ b/drivers/clk/at91/clk-master.c
+@@ -15,7 +15,7 @@
+ #define MASTER_PRES_MASK 0x7
+ #define MASTER_PRES_MAX MASTER_PRES_MASK
+ #define MASTER_DIV_SHIFT 8
+-#define MASTER_DIV_MASK 0x3
++#define MASTER_DIV_MASK 0x7
+
+ #define PMC_MCR 0x30
+ #define PMC_MCR_ID_MSK GENMASK(3, 0)
+diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
+index 7b86affc6d7c..0a9364bde339 100644
+--- a/drivers/clk/at91/pmc.h
++++ b/drivers/clk/at91/pmc.h
+@@ -48,7 +48,7 @@ extern const struct clk_master_layout at91sam9x5_master_layout;
+
+ struct clk_master_characteristics {
+ struct clk_range output;
+- u32 divisors[4];
++ u32 divisors[5];
+ u8 have_div3_pres;
+ };
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/105-clk-at91-sama7g5-add-5th-divisor-for-mck0-layout-and.patch b/target/linux/at91/patches-5.10/105-clk-at91-sama7g5-add-5th-divisor-for-mck0-layout-and.patch
new file mode 100644
index 0000000000..713bc737a1
--- /dev/null
+++ b/target/linux/at91/patches-5.10/105-clk-at91-sama7g5-add-5th-divisor-for-mck0-layout-and.patch
@@ -0,0 +1,41 @@
+From c41f013e13962dcc78239d5e4834214d44556cfb Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Thu, 19 Nov 2020 17:43:11 +0200
+Subject: [PATCH 105/247] clk: at91: sama7g5: add 5th divisor for mck0 layout
+ and characteristics
+
+This SoC has the 5th divisor for the mck0 master clock.
+Adapt the characteristics accordingly.
+
+Reported-by: Mihai Sain <mihai.sain@microchip.com>
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605800597-16720-6-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/sama7g5.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index d3c3469d47d9..d685e22b2014 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -775,13 +775,13 @@ static const struct clk_pll_characteristics pll_characteristics = {
+ /* MCK0 characteristics. */
+ static const struct clk_master_characteristics mck0_characteristics = {
+ .output = { .min = 140000000, .max = 200000000 },
+- .divisors = { 1, 2, 4, 3 },
++ .divisors = { 1, 2, 4, 3, 5 },
+ .have_div3_pres = 1,
+ };
+
+ /* MCK0 layout. */
+ static const struct clk_master_layout mck0_layout = {
+- .mask = 0x373,
++ .mask = 0x773,
+ .pres_shift = 4,
+ .offset = 0x28,
+ };
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/106-clk-at91-clk-sam9x60-pll-allow-runtime-changes-for-p.patch b/target/linux/at91/patches-5.10/106-clk-at91-clk-sam9x60-pll-allow-runtime-changes-for-p.patch
new file mode 100644
index 0000000000..f27634ae8b
--- /dev/null
+++ b/target/linux/at91/patches-5.10/106-clk-at91-clk-sam9x60-pll-allow-runtime-changes-for-p.patch
@@ -0,0 +1,521 @@
+From 6fe2927863de96edf35d8357712dbf83a489f556 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 19 Nov 2020 17:43:12 +0200
+Subject: [PATCH 106/247] clk: at91: clk-sam9x60-pll: allow runtime changes for
+ pll
+
+Allow runtime frequency changes for PLLs registered with proper flags.
+This is necessary for CPU PLL on SAMA7G5 which is used by DVFS.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605800597-16720-7-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/clk-sam9x60-pll.c | 145 +++++++++++++++++++++++++----
+ drivers/clk/at91/pmc.h | 4 +-
+ drivers/clk/at91/sam9x60.c | 22 ++++-
+ drivers/clk/at91/sama7g5.c | 67 +++++++++----
+ 4 files changed, 197 insertions(+), 41 deletions(-)
+
+diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
+index 5a9daa3643a7..1f52409475e9 100644
+--- a/drivers/clk/at91/clk-sam9x60-pll.c
++++ b/drivers/clk/at91/clk-sam9x60-pll.c
+@@ -229,6 +229,57 @@ static int sam9x60_frac_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ return sam9x60_frac_pll_compute_mul_frac(core, rate, parent_rate, true);
+ }
+
++static int sam9x60_frac_pll_set_rate_chg(struct clk_hw *hw, unsigned long rate,
++ unsigned long parent_rate)
++{
++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
++ struct sam9x60_frac *frac = to_sam9x60_frac(core);
++ struct regmap *regmap = core->regmap;
++ unsigned long irqflags;
++ unsigned int val, cfrac, cmul;
++ long ret;
++
++ ret = sam9x60_frac_pll_compute_mul_frac(core, rate, parent_rate, true);
++ if (ret <= 0)
++ return ret;
++
++ spin_lock_irqsave(core->lock, irqflags);
++
++ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK,
++ core->id);
++ regmap_read(regmap, AT91_PMC_PLL_CTRL1, &val);
++ cmul = (val & core->layout->mul_mask) >> core->layout->mul_shift;
++ cfrac = (val & core->layout->frac_mask) >> core->layout->frac_shift;
++
++ if (cmul == frac->mul && cfrac == frac->frac)
++ goto unlock;
++
++ regmap_write(regmap, AT91_PMC_PLL_CTRL1,
++ (frac->mul << core->layout->mul_shift) |
++ (frac->frac << core->layout->frac_shift));
++
++ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
++ AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
++ AT91_PMC_PLL_UPDT_UPDATE | core->id);
++
++ regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0,
++ AT91_PMC_PLL_CTRL0_ENLOCK | AT91_PMC_PLL_CTRL0_ENPLL,
++ AT91_PMC_PLL_CTRL0_ENLOCK |
++ AT91_PMC_PLL_CTRL0_ENPLL);
++
++ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
++ AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
++ AT91_PMC_PLL_UPDT_UPDATE | core->id);
++
++ while (!sam9x60_pll_ready(regmap, core->id))
++ cpu_relax();
++
++unlock:
++ spin_unlock_irqrestore(core->lock, irqflags);
++
++ return ret;
++}
++
+ static const struct clk_ops sam9x60_frac_pll_ops = {
+ .prepare = sam9x60_frac_pll_prepare,
+ .unprepare = sam9x60_frac_pll_unprepare,
+@@ -238,6 +289,15 @@ static const struct clk_ops sam9x60_frac_pll_ops = {
+ .set_rate = sam9x60_frac_pll_set_rate,
+ };
+
++static const struct clk_ops sam9x60_frac_pll_ops_chg = {
++ .prepare = sam9x60_frac_pll_prepare,
++ .unprepare = sam9x60_frac_pll_unprepare,
++ .is_prepared = sam9x60_frac_pll_is_prepared,
++ .recalc_rate = sam9x60_frac_pll_recalc_rate,
++ .round_rate = sam9x60_frac_pll_round_rate,
++ .set_rate = sam9x60_frac_pll_set_rate_chg,
++};
++
+ static int sam9x60_div_pll_prepare(struct clk_hw *hw)
+ {
+ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
+@@ -384,6 +444,44 @@ static int sam9x60_div_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ return 0;
+ }
+
++static int sam9x60_div_pll_set_rate_chg(struct clk_hw *hw, unsigned long rate,
++ unsigned long parent_rate)
++{
++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
++ struct sam9x60_div *div = to_sam9x60_div(core);
++ struct regmap *regmap = core->regmap;
++ unsigned long irqflags;
++ unsigned int val, cdiv;
++
++ div->div = DIV_ROUND_CLOSEST(parent_rate, rate) - 1;
++
++ spin_lock_irqsave(core->lock, irqflags);
++ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK,
++ core->id);
++ regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val);
++ cdiv = (val & core->layout->div_mask) >> core->layout->div_shift;
++
++ /* Stop if nothing changed. */
++ if (cdiv == div->div)
++ goto unlock;
++
++ regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0,
++ core->layout->div_mask,
++ (div->div << core->layout->div_shift));
++
++ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
++ AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
++ AT91_PMC_PLL_UPDT_UPDATE | core->id);
++
++ while (!sam9x60_pll_ready(regmap, core->id))
++ cpu_relax();
++
++unlock:
++ spin_unlock_irqrestore(core->lock, irqflags);
++
++ return 0;
++}
++
+ static const struct clk_ops sam9x60_div_pll_ops = {
+ .prepare = sam9x60_div_pll_prepare,
+ .unprepare = sam9x60_div_pll_unprepare,
+@@ -393,17 +491,26 @@ static const struct clk_ops sam9x60_div_pll_ops = {
+ .set_rate = sam9x60_div_pll_set_rate,
+ };
+
++static const struct clk_ops sam9x60_div_pll_ops_chg = {
++ .prepare = sam9x60_div_pll_prepare,
++ .unprepare = sam9x60_div_pll_unprepare,
++ .is_prepared = sam9x60_div_pll_is_prepared,
++ .recalc_rate = sam9x60_div_pll_recalc_rate,
++ .round_rate = sam9x60_div_pll_round_rate,
++ .set_rate = sam9x60_div_pll_set_rate_chg,
++};
++
+ struct clk_hw * __init
+ sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
+ const char *name, const char *parent_name,
+ struct clk_hw *parent_hw, u8 id,
+ const struct clk_pll_characteristics *characteristics,
+- const struct clk_pll_layout *layout, bool critical)
++ const struct clk_pll_layout *layout, u32 flags)
+ {
+ struct sam9x60_frac *frac;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+- unsigned long parent_rate, flags;
++ unsigned long parent_rate, irqflags;
+ unsigned int val;
+ int ret;
+
+@@ -417,10 +524,12 @@ sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
+ init.name = name;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+- init.ops = &sam9x60_frac_pll_ops;
+- init.flags = CLK_SET_RATE_GATE;
+- if (critical)
+- init.flags |= CLK_IS_CRITICAL;
++ if (flags & CLK_SET_RATE_GATE)
++ init.ops = &sam9x60_frac_pll_ops;
++ else
++ init.ops = &sam9x60_frac_pll_ops_chg;
++
++ init.flags = flags;
+
+ frac->core.id = id;
+ frac->core.hw.init = &init;
+@@ -429,7 +538,7 @@ sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
+ frac->core.regmap = regmap;
+ frac->core.lock = lock;
+
+- spin_lock_irqsave(frac->core.lock, flags);
++ spin_lock_irqsave(frac->core.lock, irqflags);
+ if (sam9x60_pll_ready(regmap, id)) {
+ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
+ AT91_PMC_PLL_UPDT_ID_MSK, id);
+@@ -457,7 +566,7 @@ sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
+ goto free;
+ }
+ }
+- spin_unlock_irqrestore(frac->core.lock, flags);
++ spin_unlock_irqrestore(frac->core.lock, irqflags);
+
+ hw = &frac->core.hw;
+ ret = clk_hw_register(NULL, hw);
+@@ -469,7 +578,7 @@ sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
+ return hw;
+
+ free:
+- spin_unlock_irqrestore(frac->core.lock, flags);
++ spin_unlock_irqrestore(frac->core.lock, irqflags);
+ kfree(frac);
+ return hw;
+ }
+@@ -478,12 +587,12 @@ struct clk_hw * __init
+ sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
+ const char *name, const char *parent_name, u8 id,
+ const struct clk_pll_characteristics *characteristics,
+- const struct clk_pll_layout *layout, bool critical)
++ const struct clk_pll_layout *layout, u32 flags)
+ {
+ struct sam9x60_div *div;
+ struct clk_hw *hw;
+ struct clk_init_data init;
+- unsigned long flags;
++ unsigned long irqflags;
+ unsigned int val;
+ int ret;
+
+@@ -497,11 +606,11 @@ sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
+ init.name = name;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+- init.ops = &sam9x60_div_pll_ops;
+- init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
+- CLK_SET_RATE_PARENT;
+- if (critical)
+- init.flags |= CLK_IS_CRITICAL;
++ if (flags & CLK_SET_RATE_GATE)
++ init.ops = &sam9x60_div_pll_ops;
++ else
++ init.ops = &sam9x60_div_pll_ops_chg;
++ init.flags = flags;
+
+ div->core.id = id;
+ div->core.hw.init = &init;
+@@ -510,14 +619,14 @@ sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
+ div->core.regmap = regmap;
+ div->core.lock = lock;
+
+- spin_lock_irqsave(div->core.lock, flags);
++ spin_lock_irqsave(div->core.lock, irqflags);
+
+ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
+ AT91_PMC_PLL_UPDT_ID_MSK, id);
+ regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val);
+ div->div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, val);
+
+- spin_unlock_irqrestore(div->core.lock, flags);
++ spin_unlock_irqrestore(div->core.lock, irqflags);
+
+ hw = &div->core.hw;
+ ret = clk_hw_register(NULL, hw);
+diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
+index 0a9364bde339..bedcd85ad750 100644
+--- a/drivers/clk/at91/pmc.h
++++ b/drivers/clk/at91/pmc.h
+@@ -190,14 +190,14 @@ struct clk_hw * __init
+ sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
+ const char *name, const char *parent_name, u8 id,
+ const struct clk_pll_characteristics *characteristics,
+- const struct clk_pll_layout *layout, bool critical);
++ const struct clk_pll_layout *layout, u32 flags);
+
+ struct clk_hw * __init
+ sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
+ const char *name, const char *parent_name,
+ struct clk_hw *parent_hw, u8 id,
+ const struct clk_pll_characteristics *characteristics,
+- const struct clk_pll_layout *layout, bool critical);
++ const struct clk_pll_layout *layout, u32 flags);
+
+ struct clk_hw * __init
+ at91_clk_register_programmable(struct regmap *regmap, const char *name,
+diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
+index c8cbec5308f0..4cb0d31babf7 100644
+--- a/drivers/clk/at91/sam9x60.c
++++ b/drivers/clk/at91/sam9x60.c
+@@ -224,13 +224,24 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
+ hw = sam9x60_clk_register_frac_pll(regmap, &pmc_pll_lock, "pllack_fracck",
+ "mainck", sam9x60_pmc->chws[PMC_MAIN],
+ 0, &plla_characteristics,
+- &pll_frac_layout, true);
++ &pll_frac_layout,
++ /*
++ * This feeds pllack_divck which
++ * feeds CPU. It should not be
++ * disabled.
++ */
++ CLK_IS_CRITICAL | CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = sam9x60_clk_register_div_pll(regmap, &pmc_pll_lock, "pllack_divck",
+ "pllack_fracck", 0, &plla_characteristics,
+- &pll_div_layout, true);
++ &pll_div_layout,
++ /*
++ * This feeds CPU. It should not
++ * be disabled.
++ */
++ CLK_IS_CRITICAL | CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -239,13 +250,16 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
+ hw = sam9x60_clk_register_frac_pll(regmap, &pmc_pll_lock, "upllck_fracck",
+ "main_osc", main_osc_hw, 1,
+ &upll_characteristics,
+- &pll_frac_layout, false);
++ &pll_frac_layout, CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ hw = sam9x60_clk_register_div_pll(regmap, &pmc_pll_lock, "upllck_divck",
+ "upllck_fracck", 1, &upll_characteristics,
+- &pll_div_layout, false);
++ &pll_div_layout,
++ CLK_SET_RATE_GATE |
++ CLK_SET_PARENT_GATE |
++ CLK_SET_RATE_PARENT);
+ if (IS_ERR(hw))
+ goto err_free;
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index d685e22b2014..d7c2b731ad20 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -95,15 +95,15 @@ static const struct clk_pll_layout pll_layout_divio = {
+ * @p: clock parent
+ * @l: clock layout
+ * @t: clock type
+- * @f: true if clock is critical and cannot be disabled
++ * @f: clock flags
+ * @eid: export index in sama7g5->chws[] array
+ */
+ static const struct {
+ const char *n;
+ const char *p;
+ const struct clk_pll_layout *l;
++ unsigned long f;
+ u8 t;
+- u8 c;
+ u8 eid;
+ } sama7g5_plls[][PLL_ID_MAX] = {
+ [PLL_ID_CPU] = {
+@@ -111,13 +111,18 @@ static const struct {
+ .p = "mainck",
+ .l = &pll_layout_frac,
+ .t = PLL_TYPE_FRAC,
+- .c = 1, },
++ /*
++ * This feeds cpupll_divpmcck which feeds CPU. It should
++ * not be disabled.
++ */
++ .f = CLK_IS_CRITICAL, },
+
+ { .n = "cpupll_divpmcck",
+ .p = "cpupll_fracck",
+ .l = &pll_layout_divpmc,
+ .t = PLL_TYPE_DIV,
+- .c = 1,
++ /* This feeds CPU. It should not be disabled. */
++ .f = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
+ .eid = PMC_CPUPLL, },
+ },
+
+@@ -126,13 +131,22 @@ static const struct {
+ .p = "mainck",
+ .l = &pll_layout_frac,
+ .t = PLL_TYPE_FRAC,
+- .c = 1, },
++ /*
++ * This feeds syspll_divpmcck which may feed critial parts
++ * of the systems like timers. Therefore it should not be
++ * disabled.
++ */
++ .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, },
+
+ { .n = "syspll_divpmcck",
+ .p = "syspll_fracck",
+ .l = &pll_layout_divpmc,
+ .t = PLL_TYPE_DIV,
+- .c = 1,
++ /*
++ * This may feed critial parts of the systems like timers.
++ * Therefore it should not be disabled.
++ */
++ .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE,
+ .eid = PMC_SYSPLL, },
+ },
+
+@@ -141,55 +155,71 @@ static const struct {
+ .p = "mainck",
+ .l = &pll_layout_frac,
+ .t = PLL_TYPE_FRAC,
+- .c = 1, },
++ /*
++ * This feeds ddrpll_divpmcck which feeds DDR. It should not
++ * be disabled.
++ */
++ .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, },
+
+ { .n = "ddrpll_divpmcck",
+ .p = "ddrpll_fracck",
+ .l = &pll_layout_divpmc,
+ .t = PLL_TYPE_DIV,
+- .c = 1, },
++ /* This feeds DDR. It should not be disabled. */
++ .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, },
+ },
+
+ [PLL_ID_IMG] = {
+ { .n = "imgpll_fracck",
+ .p = "mainck",
+ .l = &pll_layout_frac,
+- .t = PLL_TYPE_FRAC, },
++ .t = PLL_TYPE_FRAC,
++ .f = CLK_SET_RATE_GATE, },
+
+ { .n = "imgpll_divpmcck",
+ .p = "imgpll_fracck",
+ .l = &pll_layout_divpmc,
+- .t = PLL_TYPE_DIV, },
++ .t = PLL_TYPE_DIV,
++ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
++ CLK_SET_RATE_PARENT, },
+ },
+
+ [PLL_ID_BAUD] = {
+ { .n = "baudpll_fracck",
+ .p = "mainck",
+ .l = &pll_layout_frac,
+- .t = PLL_TYPE_FRAC, },
++ .t = PLL_TYPE_FRAC,
++ .f = CLK_SET_RATE_GATE, },
+
+ { .n = "baudpll_divpmcck",
+ .p = "baudpll_fracck",
+ .l = &pll_layout_divpmc,
+- .t = PLL_TYPE_DIV, },
++ .t = PLL_TYPE_DIV,
++ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
++ CLK_SET_RATE_PARENT, },
+ },
+
+ [PLL_ID_AUDIO] = {
+ { .n = "audiopll_fracck",
+ .p = "main_xtal",
+ .l = &pll_layout_frac,
+- .t = PLL_TYPE_FRAC, },
++ .t = PLL_TYPE_FRAC,
++ .f = CLK_SET_RATE_GATE, },
+
+ { .n = "audiopll_divpmcck",
+ .p = "audiopll_fracck",
+ .l = &pll_layout_divpmc,
+ .t = PLL_TYPE_DIV,
++ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
++ CLK_SET_RATE_PARENT,
+ .eid = PMC_AUDIOPMCPLL, },
+
+ { .n = "audiopll_diviock",
+ .p = "audiopll_fracck",
+ .l = &pll_layout_divio,
+ .t = PLL_TYPE_DIV,
++ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
++ CLK_SET_RATE_PARENT,
+ .eid = PMC_AUDIOIOPLL, },
+ },
+
+@@ -197,12 +227,15 @@ static const struct {
+ { .n = "ethpll_fracck",
+ .p = "main_xtal",
+ .l = &pll_layout_frac,
+- .t = PLL_TYPE_FRAC, },
++ .t = PLL_TYPE_FRAC,
++ .f = CLK_SET_RATE_GATE, },
+
+ { .n = "ethpll_divpmcck",
+ .p = "ethpll_fracck",
+ .l = &pll_layout_divpmc,
+- .t = PLL_TYPE_DIV, },
++ .t = PLL_TYPE_DIV,
++ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
++ CLK_SET_RATE_PARENT, },
+ },
+ };
+
+@@ -890,7 +923,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ sama7g5_plls[i][j].p, parent_hw, i,
+ &pll_characteristics,
+ sama7g5_plls[i][j].l,
+- sama7g5_plls[i][j].c);
++ sama7g5_plls[i][j].f);
+ break;
+
+ case PLL_TYPE_DIV:
+@@ -899,7 +932,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ sama7g5_plls[i][j].p, i,
+ &pll_characteristics,
+ sama7g5_plls[i][j].l,
+- sama7g5_plls[i][j].c);
++ sama7g5_plls[i][j].f);
+ break;
+
+ default:
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/107-clk-at91-sama7g5-remove-mck0-from-parent-list-of-oth.patch b/target/linux/at91/patches-5.10/107-clk-at91-sama7g5-remove-mck0-from-parent-list-of-oth.patch
new file mode 100644
index 0000000000..20d6776a92
--- /dev/null
+++ b/target/linux/at91/patches-5.10/107-clk-at91-sama7g5-remove-mck0-from-parent-list-of-oth.patch
@@ -0,0 +1,201 @@
+From 7cfe2dfe5ac7c72b904e4b59b240caa42721ee07 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 19 Nov 2020 17:43:13 +0200
+Subject: [PATCH 107/247] clk: at91: sama7g5: remove mck0 from parent list of
+ other clocks
+
+MCK0 is changed at runtime by DVFS. Due to this, since not all IPs
+are glitch free aware at MCK0 changes, remove MCK0 from parent list
+of other clocks (e.g. generic clock, programmable/system clock, MCKX).
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605800597-16720-8-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/sama7g5.c | 55 ++++++++++++++++++--------------------
+ 1 file changed, 26 insertions(+), 29 deletions(-)
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index d7c2b731ad20..335e9c943c65 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -280,7 +280,7 @@ static const struct {
+ .ep = { "syspll_divpmcck", "ddrpll_divpmcck", "imgpll_divpmcck", },
+ .ep_mux_table = { 5, 6, 7, },
+ .ep_count = 3,
+- .ep_chg_id = 6, },
++ .ep_chg_id = 5, },
+
+ { .n = "mck4",
+ .id = 4,
+@@ -313,7 +313,7 @@ static const struct {
+ };
+
+ /* Mux table for programmable clocks. */
+-static u32 sama7g5_prog_mux_table[] = { 0, 1, 2, 3, 5, 6, 7, 8, 9, 10, };
++static u32 sama7g5_prog_mux_table[] = { 0, 1, 2, 5, 6, 7, 8, 9, 10, };
+
+ /**
+ * Peripheral clock description
+@@ -436,7 +436,7 @@ static const struct {
+ .pp = { "audiopll_divpmcck", },
+ .pp_mux_table = { 9, },
+ .pp_count = 1,
+- .pp_chg_id = 4, },
++ .pp_chg_id = 3, },
+
+ { .n = "csi_gclk",
+ .id = 33,
+@@ -548,7 +548,7 @@ static const struct {
+ .pp = { "ethpll_divpmcck", },
+ .pp_mux_table = { 10, },
+ .pp_count = 1,
+- .pp_chg_id = 4, },
++ .pp_chg_id = 3, },
+
+ { .n = "gmac1_gclk",
+ .id = 52,
+@@ -580,7 +580,7 @@ static const struct {
+ .pp = { "syspll_divpmcck", "audiopll_divpmcck", },
+ .pp_mux_table = { 5, 9, },
+ .pp_count = 2,
+- .pp_chg_id = 5, },
++ .pp_chg_id = 4, },
+
+ { .n = "i2smcc1_gclk",
+ .id = 58,
+@@ -588,7 +588,7 @@ static const struct {
+ .pp = { "syspll_divpmcck", "audiopll_divpmcck", },
+ .pp_mux_table = { 5, 9, },
+ .pp_count = 2,
+- .pp_chg_id = 5, },
++ .pp_chg_id = 4, },
+
+ { .n = "mcan0_gclk",
+ .id = 61,
+@@ -730,7 +730,7 @@ static const struct {
+ .pp = { "syspll_divpmcck", "baudpll_divpmcck", },
+ .pp_mux_table = { 5, 8, },
+ .pp_count = 2,
+- .pp_chg_id = 5, },
++ .pp_chg_id = 4, },
+
+ { .n = "sdmmc1_gclk",
+ .id = 81,
+@@ -738,7 +738,7 @@ static const struct {
+ .pp = { "syspll_divpmcck", "baudpll_divpmcck", },
+ .pp_mux_table = { 5, 8, },
+ .pp_count = 2,
+- .pp_chg_id = 5, },
++ .pp_chg_id = 4, },
+
+ { .n = "sdmmc2_gclk",
+ .id = 82,
+@@ -746,7 +746,7 @@ static const struct {
+ .pp = { "syspll_divpmcck", "baudpll_divpmcck", },
+ .pp_mux_table = { 5, 8, },
+ .pp_count = 2,
+- .pp_chg_id = 5, },
++ .pp_chg_id = 4, },
+
+ { .n = "spdifrx_gclk",
+ .id = 84,
+@@ -754,7 +754,7 @@ static const struct {
+ .pp = { "syspll_divpmcck", "audiopll_divpmcck", },
+ .pp_mux_table = { 5, 9, },
+ .pp_count = 2,
+- .pp_chg_id = 5, },
++ .pp_chg_id = 4, },
+
+ { .n = "spdiftx_gclk",
+ .id = 85,
+@@ -762,7 +762,7 @@ static const struct {
+ .pp = { "syspll_divpmcck", "audiopll_divpmcck", },
+ .pp_mux_table = { 5, 9, },
+ .pp_count = 2,
+- .pp_chg_id = 5, },
++ .pp_chg_id = 4, },
+
+ { .n = "tcb0_ch0_gclk",
+ .id = 88,
+@@ -961,9 +961,8 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ parent_names[0] = md_slck_name;
+ parent_names[1] = td_slck_name;
+ parent_names[2] = "mainck";
+- parent_names[3] = "mck0";
+ for (i = 0; i < ARRAY_SIZE(sama7g5_mckx); i++) {
+- u8 num_parents = 4 + sama7g5_mckx[i].ep_count;
++ u8 num_parents = 3 + sama7g5_mckx[i].ep_count;
+ u32 *mux_table;
+
+ mux_table = kmalloc_array(num_parents, sizeof(*mux_table),
+@@ -971,10 +970,10 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ if (!mux_table)
+ goto err_free;
+
+- SAMA7G5_INIT_TABLE(mux_table, 4);
+- SAMA7G5_FILL_TABLE(&mux_table[4], sama7g5_mckx[i].ep_mux_table,
++ SAMA7G5_INIT_TABLE(mux_table, 3);
++ SAMA7G5_FILL_TABLE(&mux_table[3], sama7g5_mckx[i].ep_mux_table,
+ sama7g5_mckx[i].ep_count);
+- SAMA7G5_FILL_TABLE(&parent_names[4], sama7g5_mckx[i].ep,
++ SAMA7G5_FILL_TABLE(&parent_names[3], sama7g5_mckx[i].ep,
+ sama7g5_mckx[i].ep_count);
+
+ hw = at91_clk_sama7g5_register_master(regmap, sama7g5_mckx[i].n,
+@@ -997,20 +996,19 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ parent_names[0] = md_slck_name;
+ parent_names[1] = td_slck_name;
+ parent_names[2] = "mainck";
+- parent_names[3] = "mck0";
+- parent_names[4] = "syspll_divpmcck";
+- parent_names[5] = "ddrpll_divpmcck";
+- parent_names[6] = "imgpll_divpmcck";
+- parent_names[7] = "baudpll_divpmcck";
+- parent_names[8] = "audiopll_divpmcck";
+- parent_names[9] = "ethpll_divpmcck";
++ parent_names[3] = "syspll_divpmcck";
++ parent_names[4] = "ddrpll_divpmcck";
++ parent_names[5] = "imgpll_divpmcck";
++ parent_names[6] = "baudpll_divpmcck";
++ parent_names[7] = "audiopll_divpmcck";
++ parent_names[8] = "ethpll_divpmcck";
+ for (i = 0; i < 8; i++) {
+ char name[6];
+
+ snprintf(name, sizeof(name), "prog%d", i);
+
+ hw = at91_clk_register_programmable(regmap, name, parent_names,
+- 10, i,
++ 9, i,
+ &programmable_layout,
+ sama7g5_prog_mux_table);
+ if (IS_ERR(hw))
+@@ -1047,9 +1045,8 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ parent_names[0] = md_slck_name;
+ parent_names[1] = td_slck_name;
+ parent_names[2] = "mainck";
+- parent_names[3] = "mck0";
+ for (i = 0; i < ARRAY_SIZE(sama7g5_gck); i++) {
+- u8 num_parents = 4 + sama7g5_gck[i].pp_count;
++ u8 num_parents = 3 + sama7g5_gck[i].pp_count;
+ u32 *mux_table;
+
+ mux_table = kmalloc_array(num_parents, sizeof(*mux_table),
+@@ -1057,10 +1054,10 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ if (!mux_table)
+ goto err_free;
+
+- SAMA7G5_INIT_TABLE(mux_table, 4);
+- SAMA7G5_FILL_TABLE(&mux_table[4], sama7g5_gck[i].pp_mux_table,
++ SAMA7G5_INIT_TABLE(mux_table, 3);
++ SAMA7G5_FILL_TABLE(&mux_table[3], sama7g5_gck[i].pp_mux_table,
+ sama7g5_gck[i].pp_count);
+- SAMA7G5_FILL_TABLE(&parent_names[4], sama7g5_gck[i].pp,
++ SAMA7G5_FILL_TABLE(&parent_names[3], sama7g5_gck[i].pp,
+ sama7g5_gck[i].pp_count);
+
+ hw = at91_clk_register_generated(regmap, &pmc_pcr_lock,
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/108-clk-at91-sama7g5-decrease-lower-limit-for-MCK0-rate.patch b/target/linux/at91/patches-5.10/108-clk-at91-sama7g5-decrease-lower-limit-for-MCK0-rate.patch
new file mode 100644
index 0000000000..d812538c3e
--- /dev/null
+++ b/target/linux/at91/patches-5.10/108-clk-at91-sama7g5-decrease-lower-limit-for-MCK0-rate.patch
@@ -0,0 +1,35 @@
+From 8b88f1e9918c173b24b43015cdb713cdde9e4d17 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 19 Nov 2020 17:43:14 +0200
+Subject: [PATCH 108/247] clk: at91: sama7g5: decrease lower limit for MCK0
+ rate
+
+On SAMA7G5 CPU clock is changed at run-time by DVFS. Since MCK0 and
+CPU clock shares the same parent clock (CPUPLL clock) the MCK0 is
+also changed by DVFS to avoid over/under clocking of MCK0 consumers.
+The lower limit is changed to be able to set MCK0 accordingly by
+DVFS.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605800597-16720-9-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/sama7g5.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index 335e9c943c65..29d9781e6712 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -807,7 +807,7 @@ static const struct clk_pll_characteristics pll_characteristics = {
+
+ /* MCK0 characteristics. */
+ static const struct clk_master_characteristics mck0_characteristics = {
+- .output = { .min = 140000000, .max = 200000000 },
++ .output = { .min = 50000000, .max = 200000000 },
+ .divisors = { 1, 2, 4, 3, 5 },
+ .have_div3_pres = 1,
+ };
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/109-clk-at91-sama7g5-do-not-allow-cpu-pll-to-go-higher-t.patch b/target/linux/at91/patches-5.10/109-clk-at91-sama7g5-do-not-allow-cpu-pll-to-go-higher-t.patch
new file mode 100644
index 0000000000..a30a489a8a
--- /dev/null
+++ b/target/linux/at91/patches-5.10/109-clk-at91-sama7g5-do-not-allow-cpu-pll-to-go-higher-t.patch
@@ -0,0 +1,226 @@
+From 943ed75a2a5ab08582d3bc8025e8111903698763 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 19 Nov 2020 17:43:15 +0200
+Subject: [PATCH 109/247] clk: at91: sama7g5: do not allow cpu pll to go higher
+ than 1GHz
+
+Since CPU PLL feeds both CPU clock and MCK0, MCK0 cannot go higher
+than 200MHz and MCK0 maximum prescaller is 5 limit the CPU PLL at
+1GHz to avoid MCK0 overclocking while CPU PLL is changed by DVFS.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605800597-16720-10-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/sama7g5.c | 61 +++++++++++++++++++++++++++++---------
+ 1 file changed, 47 insertions(+), 14 deletions(-)
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index 29d9781e6712..e0c4d2eb9f59 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -89,11 +89,40 @@ static const struct clk_pll_layout pll_layout_divio = {
+ .endiv_shift = 30,
+ };
+
++/*
++ * CPU PLL output range.
++ * Notice: The upper limit has been setup to 1000000002 due to hardware
++ * block which cannot output exactly 1GHz.
++ */
++static const struct clk_range cpu_pll_outputs[] = {
++ { .min = 2343750, .max = 1000000002 },
++};
++
++/* PLL output range. */
++static const struct clk_range pll_outputs[] = {
++ { .min = 2343750, .max = 1200000000 },
++};
++
++/* CPU PLL characteristics. */
++static const struct clk_pll_characteristics cpu_pll_characteristics = {
++ .input = { .min = 12000000, .max = 50000000 },
++ .num_output = ARRAY_SIZE(cpu_pll_outputs),
++ .output = cpu_pll_outputs,
++};
++
++/* PLL characteristics. */
++static const struct clk_pll_characteristics pll_characteristics = {
++ .input = { .min = 12000000, .max = 50000000 },
++ .num_output = ARRAY_SIZE(pll_outputs),
++ .output = pll_outputs,
++};
++
+ /**
+ * PLL clocks description
+ * @n: clock name
+ * @p: clock parent
+ * @l: clock layout
++ * @c: clock characteristics
+ * @t: clock type
+ * @f: clock flags
+ * @eid: export index in sama7g5->chws[] array
+@@ -102,6 +131,7 @@ static const struct {
+ const char *n;
+ const char *p;
+ const struct clk_pll_layout *l;
++ const struct clk_pll_characteristics *c;
+ unsigned long f;
+ u8 t;
+ u8 eid;
+@@ -110,6 +140,7 @@ static const struct {
+ { .n = "cpupll_fracck",
+ .p = "mainck",
+ .l = &pll_layout_frac,
++ .c = &cpu_pll_characteristics,
+ .t = PLL_TYPE_FRAC,
+ /*
+ * This feeds cpupll_divpmcck which feeds CPU. It should
+@@ -120,6 +151,7 @@ static const struct {
+ { .n = "cpupll_divpmcck",
+ .p = "cpupll_fracck",
+ .l = &pll_layout_divpmc,
++ .c = &cpu_pll_characteristics,
+ .t = PLL_TYPE_DIV,
+ /* This feeds CPU. It should not be disabled. */
+ .f = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
+@@ -130,6 +162,7 @@ static const struct {
+ { .n = "syspll_fracck",
+ .p = "mainck",
+ .l = &pll_layout_frac,
++ .c = &pll_characteristics,
+ .t = PLL_TYPE_FRAC,
+ /*
+ * This feeds syspll_divpmcck which may feed critial parts
+@@ -141,6 +174,7 @@ static const struct {
+ { .n = "syspll_divpmcck",
+ .p = "syspll_fracck",
+ .l = &pll_layout_divpmc,
++ .c = &pll_characteristics,
+ .t = PLL_TYPE_DIV,
+ /*
+ * This may feed critial parts of the systems like timers.
+@@ -154,6 +188,7 @@ static const struct {
+ { .n = "ddrpll_fracck",
+ .p = "mainck",
+ .l = &pll_layout_frac,
++ .c = &pll_characteristics,
+ .t = PLL_TYPE_FRAC,
+ /*
+ * This feeds ddrpll_divpmcck which feeds DDR. It should not
+@@ -164,6 +199,7 @@ static const struct {
+ { .n = "ddrpll_divpmcck",
+ .p = "ddrpll_fracck",
+ .l = &pll_layout_divpmc,
++ .c = &pll_characteristics,
+ .t = PLL_TYPE_DIV,
+ /* This feeds DDR. It should not be disabled. */
+ .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE, },
+@@ -173,12 +209,14 @@ static const struct {
+ { .n = "imgpll_fracck",
+ .p = "mainck",
+ .l = &pll_layout_frac,
++ .c = &pll_characteristics,
+ .t = PLL_TYPE_FRAC,
+ .f = CLK_SET_RATE_GATE, },
+
+ { .n = "imgpll_divpmcck",
+ .p = "imgpll_fracck",
+ .l = &pll_layout_divpmc,
++ .c = &pll_characteristics,
+ .t = PLL_TYPE_DIV,
+ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
+ CLK_SET_RATE_PARENT, },
+@@ -188,12 +226,14 @@ static const struct {
+ { .n = "baudpll_fracck",
+ .p = "mainck",
+ .l = &pll_layout_frac,
++ .c = &pll_characteristics,
+ .t = PLL_TYPE_FRAC,
+ .f = CLK_SET_RATE_GATE, },
+
+ { .n = "baudpll_divpmcck",
+ .p = "baudpll_fracck",
+ .l = &pll_layout_divpmc,
++ .c = &pll_characteristics,
+ .t = PLL_TYPE_DIV,
+ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
+ CLK_SET_RATE_PARENT, },
+@@ -203,12 +243,14 @@ static const struct {
+ { .n = "audiopll_fracck",
+ .p = "main_xtal",
+ .l = &pll_layout_frac,
++ .c = &pll_characteristics,
+ .t = PLL_TYPE_FRAC,
+ .f = CLK_SET_RATE_GATE, },
+
+ { .n = "audiopll_divpmcck",
+ .p = "audiopll_fracck",
+ .l = &pll_layout_divpmc,
++ .c = &pll_characteristics,
+ .t = PLL_TYPE_DIV,
+ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
+ CLK_SET_RATE_PARENT,
+@@ -217,6 +259,7 @@ static const struct {
+ { .n = "audiopll_diviock",
+ .p = "audiopll_fracck",
+ .l = &pll_layout_divio,
++ .c = &pll_characteristics,
+ .t = PLL_TYPE_DIV,
+ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
+ CLK_SET_RATE_PARENT,
+@@ -227,12 +270,14 @@ static const struct {
+ { .n = "ethpll_fracck",
+ .p = "main_xtal",
+ .l = &pll_layout_frac,
++ .c = &pll_characteristics,
+ .t = PLL_TYPE_FRAC,
+ .f = CLK_SET_RATE_GATE, },
+
+ { .n = "ethpll_divpmcck",
+ .p = "ethpll_fracck",
+ .l = &pll_layout_divpmc,
++ .c = &pll_characteristics,
+ .t = PLL_TYPE_DIV,
+ .f = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
+ CLK_SET_RATE_PARENT, },
+@@ -793,18 +838,6 @@ static const struct {
+ .pp_chg_id = INT_MIN, },
+ };
+
+-/* PLL output range. */
+-static const struct clk_range pll_outputs[] = {
+- { .min = 2343750, .max = 1200000000 },
+-};
+-
+-/* PLL characteristics. */
+-static const struct clk_pll_characteristics pll_characteristics = {
+- .input = { .min = 12000000, .max = 50000000 },
+- .num_output = ARRAY_SIZE(pll_outputs),
+- .output = pll_outputs,
+-};
+-
+ /* MCK0 characteristics. */
+ static const struct clk_master_characteristics mck0_characteristics = {
+ .output = { .min = 50000000, .max = 200000000 },
+@@ -921,7 +954,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ hw = sam9x60_clk_register_frac_pll(regmap,
+ &pmc_pll_lock, sama7g5_plls[i][j].n,
+ sama7g5_plls[i][j].p, parent_hw, i,
+- &pll_characteristics,
++ sama7g5_plls[i][j].c,
+ sama7g5_plls[i][j].l,
+ sama7g5_plls[i][j].f);
+ break;
+@@ -930,7 +963,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ hw = sam9x60_clk_register_div_pll(regmap,
+ &pmc_pll_lock, sama7g5_plls[i][j].n,
+ sama7g5_plls[i][j].p, i,
+- &pll_characteristics,
++ sama7g5_plls[i][j].c,
+ sama7g5_plls[i][j].l,
+ sama7g5_plls[i][j].f);
+ break;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/110-clk-at91-clk-master-re-factor-master-clock.patch b/target/linux/at91/patches-5.10/110-clk-at91-clk-master-re-factor-master-clock.patch
new file mode 100644
index 0000000000..dc247654d2
--- /dev/null
+++ b/target/linux/at91/patches-5.10/110-clk-at91-clk-master-re-factor-master-clock.patch
@@ -0,0 +1,1261 @@
+From 9109b768fe65994547ef464b13e508b22de3e89b Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 19 Nov 2020 17:43:16 +0200
+Subject: [PATCH 110/247] clk: at91: clk-master: re-factor master clock
+
+Re-factor master clock driver by splitting it into 2 clocks: prescaller
+and divider clocks. Based on registered clock flags the prescaler's rate
+could be changed at runtime. This is necessary for platforms supporting
+DVFS (e.g. SAMA7G5) where master clock could be changed at run-time.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605800597-16720-11-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/at91rm9200.c | 21 ++-
+ drivers/clk/at91/at91sam9260.c | 26 ++-
+ drivers/clk/at91/at91sam9g45.c | 32 +++-
+ drivers/clk/at91/at91sam9n12.c | 36 ++--
+ drivers/clk/at91/at91sam9rl.c | 23 ++-
+ drivers/clk/at91/at91sam9x5.c | 28 ++-
+ drivers/clk/at91/clk-master.c | 335 ++++++++++++++++++++++++++++-----
+ drivers/clk/at91/dt-compat.c | 15 +-
+ drivers/clk/at91/pmc.h | 16 +-
+ drivers/clk/at91/sam9x60.c | 23 ++-
+ drivers/clk/at91/sama5d2.c | 42 +++--
+ drivers/clk/at91/sama5d3.c | 38 ++--
+ drivers/clk/at91/sama5d4.c | 40 ++--
+ drivers/clk/at91/sama7g5.c | 13 +-
+ 14 files changed, 542 insertions(+), 146 deletions(-)
+
+diff --git a/drivers/clk/at91/at91rm9200.c b/drivers/clk/at91/at91rm9200.c
+index 2c3d8e6ca63c..0fad1009f315 100644
+--- a/drivers/clk/at91/at91rm9200.c
++++ b/drivers/clk/at91/at91rm9200.c
+@@ -7,6 +7,8 @@
+
+ #include "pmc.h"
+
++static DEFINE_SPINLOCK(rm9200_mck_lock);
++
+ struct sck {
+ char *n;
+ char *p;
+@@ -137,9 +139,20 @@ static void __init at91rm9200_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "pllack";
+ parent_names[3] = "pllbck";
+- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+- &at91rm9200_master_layout,
+- &rm9200_mck_characteristics);
++ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
++ parent_names,
++ &at91rm9200_master_layout,
++ &rm9200_mck_characteristics,
++ &rm9200_mck_lock, CLK_SET_RATE_GATE,
++ INT_MIN);
++ if (IS_ERR(hw))
++ goto err_free;
++
++ hw = at91_clk_register_master_div(regmap, "masterck_div",
++ "masterck_pres",
++ &at91rm9200_master_layout,
++ &rm9200_mck_characteristics,
++ &rm9200_mck_lock, CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -181,7 +194,7 @@ static void __init at91rm9200_pmc_setup(struct device_node *np)
+ for (i = 0; i < ARRAY_SIZE(at91rm9200_periphck); i++) {
+ hw = at91_clk_register_peripheral(regmap,
+ at91rm9200_periphck[i].n,
+- "masterck",
++ "masterck_div",
+ at91rm9200_periphck[i].id);
+ if (IS_ERR(hw))
+ goto err_free;
+diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
+index bb81ff731ad8..ceb5495f723a 100644
+--- a/drivers/clk/at91/at91sam9260.c
++++ b/drivers/clk/at91/at91sam9260.c
+@@ -32,6 +32,8 @@ struct at91sam926x_data {
+ bool has_slck;
+ };
+
++static DEFINE_SPINLOCK(at91sam9260_mck_lock);
++
+ static const struct clk_master_characteristics sam9260_mck_characteristics = {
+ .output = { .min = 0, .max = 105000000 },
+ .divisors = { 1, 2, 4, 0 },
+@@ -218,8 +220,8 @@ static const struct sck at91sam9261_systemck[] = {
+ { .n = "pck1", .p = "prog1", .id = 9 },
+ { .n = "pck2", .p = "prog2", .id = 10 },
+ { .n = "pck3", .p = "prog3", .id = 11 },
+- { .n = "hclk0", .p = "masterck", .id = 16 },
+- { .n = "hclk1", .p = "masterck", .id = 17 },
++ { .n = "hclk0", .p = "masterck_div", .id = 16 },
++ { .n = "hclk1", .p = "masterck_div", .id = 17 },
+ };
+
+ static const struct pck at91sam9261_periphck[] = {
+@@ -413,9 +415,21 @@ static void __init at91sam926x_pmc_setup(struct device_node *np,
+ parent_names[1] = "mainck";
+ parent_names[2] = "pllack";
+ parent_names[3] = "pllbck";
+- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+- &at91rm9200_master_layout,
+- data->mck_characteristics);
++ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
++ parent_names,
++ &at91rm9200_master_layout,
++ data->mck_characteristics,
++ &at91sam9260_mck_lock,
++ CLK_SET_RATE_GATE, INT_MIN);
++ if (IS_ERR(hw))
++ goto err_free;
++
++ hw = at91_clk_register_master_div(regmap, "masterck_div",
++ "masterck_pres",
++ &at91rm9200_master_layout,
++ data->mck_characteristics,
++ &at91sam9260_mck_lock,
++ CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -457,7 +471,7 @@ static void __init at91sam926x_pmc_setup(struct device_node *np,
+ for (i = 0; i < data->num_pck; i++) {
+ hw = at91_clk_register_peripheral(regmap,
+ data->pck[i].n,
+- "masterck",
++ "masterck_div",
+ data->pck[i].id);
+ if (IS_ERR(hw))
+ goto err_free;
+diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c
+index cb4a406ed15d..0214333dedd3 100644
+--- a/drivers/clk/at91/at91sam9g45.c
++++ b/drivers/clk/at91/at91sam9g45.c
+@@ -7,6 +7,8 @@
+
+ #include "pmc.h"
+
++static DEFINE_SPINLOCK(at91sam9g45_mck_lock);
++
+ static const struct clk_master_characteristics mck_characteristics = {
+ .output = { .min = 0, .max = 133333333 },
+ .divisors = { 1, 2, 4, 3 },
+@@ -40,10 +42,10 @@ static const struct {
+ char *p;
+ u8 id;
+ } at91sam9g45_systemck[] = {
+- { .n = "ddrck", .p = "masterck", .id = 2 },
+- { .n = "uhpck", .p = "usbck", .id = 6 },
+- { .n = "pck0", .p = "prog0", .id = 8 },
+- { .n = "pck1", .p = "prog1", .id = 9 },
++ { .n = "ddrck", .p = "masterck_div", .id = 2 },
++ { .n = "uhpck", .p = "usbck", .id = 6 },
++ { .n = "pck0", .p = "prog0", .id = 8 },
++ { .n = "pck1", .p = "prog1", .id = 9 },
+ };
+
+ struct pck {
+@@ -148,9 +150,21 @@ static void __init at91sam9g45_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+- &at91rm9200_master_layout,
+- &mck_characteristics);
++ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
++ parent_names,
++ &at91rm9200_master_layout,
++ &mck_characteristics,
++ &at91sam9g45_mck_lock,
++ CLK_SET_RATE_GATE, INT_MIN);
++ if (IS_ERR(hw))
++ goto err_free;
++
++ hw = at91_clk_register_master_div(regmap, "masterck_div",
++ "masterck_pres",
++ &at91rm9200_master_layout,
++ &mck_characteristics,
++ &at91sam9g45_mck_lock,
++ CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -166,7 +180,7 @@ static void __init at91sam9g45_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+- parent_names[4] = "masterck";
++ parent_names[4] = "masterck_div";
+ for (i = 0; i < 2; i++) {
+ char name[6];
+
+@@ -195,7 +209,7 @@ static void __init at91sam9g45_pmc_setup(struct device_node *np)
+ for (i = 0; i < ARRAY_SIZE(at91sam9g45_periphck); i++) {
+ hw = at91_clk_register_peripheral(regmap,
+ at91sam9g45_periphck[i].n,
+- "masterck",
++ "masterck_div",
+ at91sam9g45_periphck[i].id);
+ if (IS_ERR(hw))
+ goto err_free;
+diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c
+index 93f7eb216122..f9db5316a7f1 100644
+--- a/drivers/clk/at91/at91sam9n12.c
++++ b/drivers/clk/at91/at91sam9n12.c
+@@ -7,6 +7,8 @@
+
+ #include "pmc.h"
+
++static DEFINE_SPINLOCK(at91sam9n12_mck_lock);
++
+ static const struct clk_master_characteristics mck_characteristics = {
+ .output = { .min = 0, .max = 133333333 },
+ .divisors = { 1, 2, 4, 3 },
+@@ -54,12 +56,12 @@ static const struct {
+ char *p;
+ u8 id;
+ } at91sam9n12_systemck[] = {
+- { .n = "ddrck", .p = "masterck", .id = 2 },
+- { .n = "lcdck", .p = "masterck", .id = 3 },
+- { .n = "uhpck", .p = "usbck", .id = 6 },
+- { .n = "udpck", .p = "usbck", .id = 7 },
+- { .n = "pck0", .p = "prog0", .id = 8 },
+- { .n = "pck1", .p = "prog1", .id = 9 },
++ { .n = "ddrck", .p = "masterck_div", .id = 2 },
++ { .n = "lcdck", .p = "masterck_div", .id = 3 },
++ { .n = "uhpck", .p = "usbck", .id = 6 },
++ { .n = "udpck", .p = "usbck", .id = 7 },
++ { .n = "pck0", .p = "prog0", .id = 8 },
++ { .n = "pck1", .p = "prog1", .id = 9 },
+ };
+
+ static const struct clk_pcr_layout at91sam9n12_pcr_layout = {
+@@ -175,9 +177,21 @@ static void __init at91sam9n12_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "pllbck";
+- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+- &at91sam9x5_master_layout,
+- &mck_characteristics);
++ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
++ parent_names,
++ &at91sam9x5_master_layout,
++ &mck_characteristics,
++ &at91sam9n12_mck_lock,
++ CLK_SET_RATE_GATE, INT_MIN);
++ if (IS_ERR(hw))
++ goto err_free;
++
++ hw = at91_clk_register_master_div(regmap, "masterck_div",
++ "masterck_pres",
++ &at91sam9x5_master_layout,
++ &mck_characteristics,
++ &at91sam9n12_mck_lock,
++ CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -191,7 +205,7 @@ static void __init at91sam9n12_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "pllbck";
+- parent_names[4] = "masterck";
++ parent_names[4] = "masterck_div";
+ for (i = 0; i < 2; i++) {
+ char name[6];
+
+@@ -221,7 +235,7 @@ static void __init at91sam9n12_pmc_setup(struct device_node *np)
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ &at91sam9n12_pcr_layout,
+ at91sam9n12_periphck[i].n,
+- "masterck",
++ "masterck_div",
+ at91sam9n12_periphck[i].id,
+ &range, INT_MIN);
+ if (IS_ERR(hw))
+diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c
+index a343eb69bb35..66736e03cfef 100644
+--- a/drivers/clk/at91/at91sam9rl.c
++++ b/drivers/clk/at91/at91sam9rl.c
+@@ -7,6 +7,8 @@
+
+ #include "pmc.h"
+
++static DEFINE_SPINLOCK(sam9rl_mck_lock);
++
+ static const struct clk_master_characteristics sam9rl_mck_characteristics = {
+ .output = { .min = 0, .max = 94000000 },
+ .divisors = { 1, 2, 4, 0 },
+@@ -117,9 +119,20 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "pllack";
+ parent_names[3] = "utmick";
+- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+- &at91rm9200_master_layout,
+- &sam9rl_mck_characteristics);
++ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
++ parent_names,
++ &at91rm9200_master_layout,
++ &sam9rl_mck_characteristics,
++ &sam9rl_mck_lock, CLK_SET_RATE_GATE,
++ INT_MIN);
++ if (IS_ERR(hw))
++ goto err_free;
++
++ hw = at91_clk_register_master_div(regmap, "masterck_div",
++ "masterck_pres",
++ &at91rm9200_master_layout,
++ &sam9rl_mck_characteristics,
++ &sam9rl_mck_lock, CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -129,7 +142,7 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "pllack";
+ parent_names[3] = "utmick";
+- parent_names[4] = "masterck";
++ parent_names[4] = "masterck_div";
+ for (i = 0; i < 2; i++) {
+ char name[6];
+
+@@ -158,7 +171,7 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
+ for (i = 0; i < ARRAY_SIZE(at91sam9rl_periphck); i++) {
+ hw = at91_clk_register_peripheral(regmap,
+ at91sam9rl_periphck[i].n,
+- "masterck",
++ "masterck_div",
+ at91sam9rl_periphck[i].id);
+ if (IS_ERR(hw))
+ goto err_free;
+diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
+index 22b9aad9efb8..79b9d3667228 100644
+--- a/drivers/clk/at91/at91sam9x5.c
++++ b/drivers/clk/at91/at91sam9x5.c
+@@ -7,6 +7,8 @@
+
+ #include "pmc.h"
+
++static DEFINE_SPINLOCK(mck_lock);
++
+ static const struct clk_master_characteristics mck_characteristics = {
+ .output = { .min = 0, .max = 133333333 },
+ .divisors = { 1, 2, 4, 3 },
+@@ -41,7 +43,7 @@ static const struct {
+ char *p;
+ u8 id;
+ } at91sam9x5_systemck[] = {
+- { .n = "ddrck", .p = "masterck", .id = 2 },
++ { .n = "ddrck", .p = "masterck_div", .id = 2 },
+ { .n = "smdck", .p = "smdclk", .id = 4 },
+ { .n = "uhpck", .p = "usbck", .id = 6 },
+ { .n = "udpck", .p = "usbck", .id = 7 },
+@@ -196,9 +198,19 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+- &at91sam9x5_master_layout,
+- &mck_characteristics);
++ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
++ parent_names,
++ &at91sam9x5_master_layout,
++ &mck_characteristics, &mck_lock,
++ CLK_SET_RATE_GATE, INT_MIN);
++ if (IS_ERR(hw))
++ goto err_free;
++
++ hw = at91_clk_register_master_div(regmap, "masterck_div",
++ "masterck_pres",
++ &at91sam9x5_master_layout,
++ &mck_characteristics, &mck_lock,
++ CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -218,7 +230,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+- parent_names[4] = "masterck";
++ parent_names[4] = "masterck_div";
+ for (i = 0; i < 2; i++) {
+ char name[6];
+
+@@ -245,7 +257,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
+ }
+
+ if (has_lcdck) {
+- hw = at91_clk_register_system(regmap, "lcdck", "masterck", 3);
++ hw = at91_clk_register_system(regmap, "lcdck", "masterck_div", 3);
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -256,7 +268,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ &at91sam9x5_pcr_layout,
+ at91sam9x5_periphck[i].n,
+- "masterck",
++ "masterck_div",
+ at91sam9x5_periphck[i].id,
+ &range, INT_MIN);
+ if (IS_ERR(hw))
+@@ -269,7 +281,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ &at91sam9x5_pcr_layout,
+ extra_pcks[i].n,
+- "masterck",
++ "masterck_div",
+ extra_pcks[i].id,
+ &range, INT_MIN);
+ if (IS_ERR(hw))
+diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
+index aafd003b30cf..a80427980bf7 100644
+--- a/drivers/clk/at91/clk-master.c
++++ b/drivers/clk/at91/clk-master.c
+@@ -58,83 +58,309 @@ static inline bool clk_master_ready(struct clk_master *master)
+ static int clk_master_prepare(struct clk_hw *hw)
+ {
+ struct clk_master *master = to_clk_master(hw);
++ unsigned long flags;
++
++ spin_lock_irqsave(master->lock, flags);
+
+ while (!clk_master_ready(master))
+ cpu_relax();
+
++ spin_unlock_irqrestore(master->lock, flags);
++
+ return 0;
+ }
+
+ static int clk_master_is_prepared(struct clk_hw *hw)
+ {
+ struct clk_master *master = to_clk_master(hw);
++ unsigned long flags;
++ bool status;
+
+- return clk_master_ready(master);
++ spin_lock_irqsave(master->lock, flags);
++ status = clk_master_ready(master);
++ spin_unlock_irqrestore(master->lock, flags);
++
++ return status;
+ }
+
+-static unsigned long clk_master_recalc_rate(struct clk_hw *hw,
+- unsigned long parent_rate)
++static unsigned long clk_master_div_recalc_rate(struct clk_hw *hw,
++ unsigned long parent_rate)
+ {
+- u8 pres;
+ u8 div;
+- unsigned long rate = parent_rate;
++ unsigned long flags, rate = parent_rate;
+ struct clk_master *master = to_clk_master(hw);
+ const struct clk_master_layout *layout = master->layout;
+ const struct clk_master_characteristics *characteristics =
+ master->characteristics;
+ unsigned int mckr;
+
++ spin_lock_irqsave(master->lock, flags);
+ regmap_read(master->regmap, master->layout->offset, &mckr);
++ spin_unlock_irqrestore(master->lock, flags);
++
+ mckr &= layout->mask;
+
+- pres = (mckr >> layout->pres_shift) & MASTER_PRES_MASK;
+ div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
+
+- if (characteristics->have_div3_pres && pres == MASTER_PRES_MAX)
+- rate /= 3;
+- else
+- rate >>= pres;
+-
+ rate /= characteristics->divisors[div];
+
+ if (rate < characteristics->output.min)
+- pr_warn("master clk is underclocked");
++ pr_warn("master clk div is underclocked");
+ else if (rate > characteristics->output.max)
+- pr_warn("master clk is overclocked");
++ pr_warn("master clk div is overclocked");
+
+ return rate;
+ }
+
+-static u8 clk_master_get_parent(struct clk_hw *hw)
++static const struct clk_ops master_div_ops = {
++ .prepare = clk_master_prepare,
++ .is_prepared = clk_master_is_prepared,
++ .recalc_rate = clk_master_div_recalc_rate,
++};
++
++static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate,
++ unsigned long parent_rate)
++{
++ struct clk_master *master = to_clk_master(hw);
++ const struct clk_master_characteristics *characteristics =
++ master->characteristics;
++ unsigned long flags;
++ int div, i;
++
++ div = DIV_ROUND_CLOSEST(parent_rate, rate);
++ if (div > ARRAY_SIZE(characteristics->divisors))
++ return -EINVAL;
++
++ for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) {
++ if (!characteristics->divisors[i])
++ break;
++
++ if (div == characteristics->divisors[i]) {
++ div = i;
++ break;
++ }
++ }
++
++ if (i == ARRAY_SIZE(characteristics->divisors))
++ return -EINVAL;
++
++ spin_lock_irqsave(master->lock, flags);
++ regmap_update_bits(master->regmap, master->layout->offset,
++ (MASTER_DIV_MASK << MASTER_DIV_SHIFT),
++ (div << MASTER_DIV_SHIFT));
++ while (!clk_master_ready(master))
++ cpu_relax();
++ spin_unlock_irqrestore(master->lock, flags);
++
++ return 0;
++}
++
++static int clk_master_div_determine_rate(struct clk_hw *hw,
++ struct clk_rate_request *req)
++{
++ struct clk_master *master = to_clk_master(hw);
++ const struct clk_master_characteristics *characteristics =
++ master->characteristics;
++ struct clk_hw *parent;
++ unsigned long parent_rate, tmp_rate, best_rate = 0;
++ int i, best_diff = INT_MIN, tmp_diff;
++
++ parent = clk_hw_get_parent(hw);
++ if (!parent)
++ return -EINVAL;
++
++ parent_rate = clk_hw_get_rate(parent);
++ if (!parent_rate)
++ return -EINVAL;
++
++ for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) {
++ if (!characteristics->divisors[i])
++ break;
++
++ tmp_rate = DIV_ROUND_CLOSEST_ULL(parent_rate,
++ characteristics->divisors[i]);
++ tmp_diff = abs(tmp_rate - req->rate);
++
++ if (!best_rate || best_diff > tmp_diff) {
++ best_diff = tmp_diff;
++ best_rate = tmp_rate;
++ }
++
++ if (!best_diff)
++ break;
++ }
++
++ req->best_parent_rate = best_rate;
++ req->best_parent_hw = parent;
++ req->rate = best_rate;
++
++ return 0;
++}
++
++static const struct clk_ops master_div_ops_chg = {
++ .prepare = clk_master_prepare,
++ .is_prepared = clk_master_is_prepared,
++ .recalc_rate = clk_master_div_recalc_rate,
++ .determine_rate = clk_master_div_determine_rate,
++ .set_rate = clk_master_div_set_rate,
++};
++
++static void clk_sama7g5_master_best_diff(struct clk_rate_request *req,
++ struct clk_hw *parent,
++ unsigned long parent_rate,
++ long *best_rate,
++ long *best_diff,
++ u32 div)
++{
++ unsigned long tmp_rate, tmp_diff;
++
++ if (div == MASTER_PRES_MAX)
++ tmp_rate = parent_rate / 3;
++ else
++ tmp_rate = parent_rate >> div;
++
++ tmp_diff = abs(req->rate - tmp_rate);
++
++ if (*best_diff < 0 || *best_diff >= tmp_diff) {
++ *best_rate = tmp_rate;
++ *best_diff = tmp_diff;
++ req->best_parent_rate = parent_rate;
++ req->best_parent_hw = parent;
++ }
++}
++
++static int clk_master_pres_determine_rate(struct clk_hw *hw,
++ struct clk_rate_request *req)
+ {
+ struct clk_master *master = to_clk_master(hw);
++ struct clk_rate_request req_parent = *req;
++ const struct clk_master_characteristics *characteristics =
++ master->characteristics;
++ struct clk_hw *parent;
++ long best_rate = LONG_MIN, best_diff = LONG_MIN;
++ u32 pres;
++ int i;
++
++ if (master->chg_pid < 0)
++ return -EOPNOTSUPP;
++
++ parent = clk_hw_get_parent_by_index(hw, master->chg_pid);
++ if (!parent)
++ return -EOPNOTSUPP;
++
++ for (i = 0; i <= MASTER_PRES_MAX; i++) {
++ if (characteristics->have_div3_pres && i == MASTER_PRES_MAX)
++ pres = 3;
++ else
++ pres = 1 << i;
++
++ req_parent.rate = req->rate * pres;
++ if (__clk_determine_rate(parent, &req_parent))
++ continue;
++
++ clk_sama7g5_master_best_diff(req, parent, req_parent.rate,
++ &best_diff, &best_rate, pres);
++ if (!best_diff)
++ break;
++ }
++
++ return 0;
++}
++
++static int clk_master_pres_set_rate(struct clk_hw *hw, unsigned long rate,
++ unsigned long parent_rate)
++{
++ struct clk_master *master = to_clk_master(hw);
++ unsigned long flags;
++ unsigned int pres;
++
++ pres = DIV_ROUND_CLOSEST(parent_rate, rate);
++ if (pres > MASTER_PRES_MAX)
++ return -EINVAL;
++
++ else if (pres == 3)
++ pres = MASTER_PRES_MAX;
++ else
++ pres = ffs(pres) - 1;
++
++ spin_lock_irqsave(master->lock, flags);
++ regmap_update_bits(master->regmap, master->layout->offset,
++ (MASTER_PRES_MASK << master->layout->pres_shift),
++ (pres << master->layout->pres_shift));
++
++ while (!clk_master_ready(master))
++ cpu_relax();
++ spin_unlock_irqrestore(master->lock, flags);
++
++ return 0;
++}
++
++static unsigned long clk_master_pres_recalc_rate(struct clk_hw *hw,
++ unsigned long parent_rate)
++{
++ struct clk_master *master = to_clk_master(hw);
++ const struct clk_master_characteristics *characteristics =
++ master->characteristics;
++ unsigned long flags;
++ unsigned int val, pres;
++
++ spin_lock_irqsave(master->lock, flags);
++ regmap_read(master->regmap, master->layout->offset, &val);
++ spin_unlock_irqrestore(master->lock, flags);
++
++ pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK;
++ if (pres == 3 && characteristics->have_div3_pres)
++ pres = 3;
++ else
++ pres = (1 << pres);
++
++ return DIV_ROUND_CLOSEST_ULL(parent_rate, pres);
++}
++
++static u8 clk_master_pres_get_parent(struct clk_hw *hw)
++{
++ struct clk_master *master = to_clk_master(hw);
++ unsigned long flags;
+ unsigned int mckr;
+
++ spin_lock_irqsave(master->lock, flags);
+ regmap_read(master->regmap, master->layout->offset, &mckr);
++ spin_unlock_irqrestore(master->lock, flags);
+
+ return mckr & AT91_PMC_CSS;
+ }
+
+-static const struct clk_ops master_ops = {
++static const struct clk_ops master_pres_ops = {
+ .prepare = clk_master_prepare,
+ .is_prepared = clk_master_is_prepared,
+- .recalc_rate = clk_master_recalc_rate,
+- .get_parent = clk_master_get_parent,
++ .recalc_rate = clk_master_pres_recalc_rate,
++ .get_parent = clk_master_pres_get_parent,
+ };
+
+-struct clk_hw * __init
+-at91_clk_register_master(struct regmap *regmap,
++static const struct clk_ops master_pres_ops_chg = {
++ .prepare = clk_master_prepare,
++ .is_prepared = clk_master_is_prepared,
++ .determine_rate = clk_master_pres_determine_rate,
++ .recalc_rate = clk_master_pres_recalc_rate,
++ .get_parent = clk_master_pres_get_parent,
++ .set_rate = clk_master_pres_set_rate,
++};
++
++static struct clk_hw * __init
++at91_clk_register_master_internal(struct regmap *regmap,
+ const char *name, int num_parents,
+ const char **parent_names,
+ const struct clk_master_layout *layout,
+- const struct clk_master_characteristics *characteristics)
++ const struct clk_master_characteristics *characteristics,
++ const struct clk_ops *ops, spinlock_t *lock, u32 flags,
++ int chg_pid)
+ {
+ struct clk_master *master;
+ struct clk_init_data init;
+ struct clk_hw *hw;
+ int ret;
+
+- if (!name || !num_parents || !parent_names)
++ if (!name || !num_parents || !parent_names || !lock)
+ return ERR_PTR(-EINVAL);
+
+ master = kzalloc(sizeof(*master), GFP_KERNEL);
+@@ -142,15 +368,17 @@ at91_clk_register_master(struct regmap *regmap,
+ return ERR_PTR(-ENOMEM);
+
+ init.name = name;
+- init.ops = &master_ops;
++ init.ops = ops;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+- init.flags = 0;
++ init.flags = flags;
+
+ master->hw.init = &init;
+ master->layout = layout;
+ master->characteristics = characteristics;
+ master->regmap = regmap;
++ master->chg_pid = chg_pid;
++ master->lock = lock;
+
+ hw = &master->hw;
+ ret = clk_hw_register(NULL, &master->hw);
+@@ -162,37 +390,54 @@ at91_clk_register_master(struct regmap *regmap,
+ return hw;
+ }
+
+-static unsigned long
+-clk_sama7g5_master_recalc_rate(struct clk_hw *hw,
+- unsigned long parent_rate)
++struct clk_hw * __init
++at91_clk_register_master_pres(struct regmap *regmap,
++ const char *name, int num_parents,
++ const char **parent_names,
++ const struct clk_master_layout *layout,
++ const struct clk_master_characteristics *characteristics,
++ spinlock_t *lock, u32 flags, int chg_pid)
+ {
+- struct clk_master *master = to_clk_master(hw);
++ const struct clk_ops *ops;
+
+- return DIV_ROUND_CLOSEST_ULL(parent_rate, (1 << master->div));
++ if (flags & CLK_SET_RATE_GATE)
++ ops = &master_pres_ops;
++ else
++ ops = &master_pres_ops_chg;
++
++ return at91_clk_register_master_internal(regmap, name, num_parents,
++ parent_names, layout,
++ characteristics, ops,
++ lock, flags, chg_pid);
+ }
+
+-static void clk_sama7g5_master_best_diff(struct clk_rate_request *req,
+- struct clk_hw *parent,
+- unsigned long parent_rate,
+- long *best_rate,
+- long *best_diff,
+- u32 div)
++struct clk_hw * __init
++at91_clk_register_master_div(struct regmap *regmap,
++ const char *name, const char *parent_name,
++ const struct clk_master_layout *layout,
++ const struct clk_master_characteristics *characteristics,
++ spinlock_t *lock, u32 flags)
+ {
+- unsigned long tmp_rate, tmp_diff;
++ const struct clk_ops *ops;
+
+- if (div == MASTER_PRES_MAX)
+- tmp_rate = parent_rate / 3;
++ if (flags & CLK_SET_RATE_GATE)
++ ops = &master_div_ops;
+ else
+- tmp_rate = parent_rate >> div;
++ ops = &master_div_ops_chg;
+
+- tmp_diff = abs(req->rate - tmp_rate);
++ return at91_clk_register_master_internal(regmap, name, 1,
++ &parent_name, layout,
++ characteristics, ops,
++ lock, flags, -EINVAL);
++}
+
+- if (*best_diff < 0 || *best_diff >= tmp_diff) {
+- *best_rate = tmp_rate;
+- *best_diff = tmp_diff;
+- req->best_parent_rate = parent_rate;
+- req->best_parent_hw = parent;
+- }
++static unsigned long
++clk_sama7g5_master_recalc_rate(struct clk_hw *hw,
++ unsigned long parent_rate)
++{
++ struct clk_master *master = to_clk_master(hw);
++
++ return DIV_ROUND_CLOSEST_ULL(parent_rate, (1 << master->div));
+ }
+
+ static int clk_sama7g5_master_determine_rate(struct clk_hw *hw,
+diff --git a/drivers/clk/at91/dt-compat.c b/drivers/clk/at91/dt-compat.c
+index a50084de97d4..a97b99c2dc12 100644
+--- a/drivers/clk/at91/dt-compat.c
++++ b/drivers/clk/at91/dt-compat.c
+@@ -24,6 +24,8 @@
+
+ #define GCK_INDEX_DT_AUDIO_PLL 5
+
++static DEFINE_SPINLOCK(mck_lock);
++
+ #ifdef CONFIG_HAVE_AT91_AUDIO_PLL
+ static void __init of_sama5d2_clk_audio_pll_frac_setup(struct device_node *np)
+ {
+@@ -388,9 +390,16 @@ of_at91_clk_master_setup(struct device_node *np,
+ if (IS_ERR(regmap))
+ return;
+
+- hw = at91_clk_register_master(regmap, name, num_parents,
+- parent_names, layout,
+- characteristics);
++ hw = at91_clk_register_master_pres(regmap, "masterck_pres", num_parents,
++ parent_names, layout,
++ characteristics, &mck_lock,
++ CLK_SET_RATE_GATE, INT_MIN);
++ if (IS_ERR(hw))
++ goto out_free_characteristics;
++
++ hw = at91_clk_register_master_div(regmap, name, "masterck_pres",
++ layout, characteristics,
++ &mck_lock, CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto out_free_characteristics;
+
+diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
+index bedcd85ad750..a49076c804a9 100644
+--- a/drivers/clk/at91/pmc.h
++++ b/drivers/clk/at91/pmc.h
+@@ -155,10 +155,18 @@ at91_clk_register_sam9x5_main(struct regmap *regmap, const char *name,
+ const char **parent_names, int num_parents);
+
+ struct clk_hw * __init
+-at91_clk_register_master(struct regmap *regmap, const char *name,
+- int num_parents, const char **parent_names,
+- const struct clk_master_layout *layout,
+- const struct clk_master_characteristics *characteristics);
++at91_clk_register_master_pres(struct regmap *regmap, const char *name,
++ int num_parents, const char **parent_names,
++ const struct clk_master_layout *layout,
++ const struct clk_master_characteristics *characteristics,
++ spinlock_t *lock, u32 flags, int chg_pid);
++
++struct clk_hw * __init
++at91_clk_register_master_div(struct regmap *regmap, const char *name,
++ const char *parent_names,
++ const struct clk_master_layout *layout,
++ const struct clk_master_characteristics *characteristics,
++ spinlock_t *lock, u32 flags);
+
+ struct clk_hw * __init
+ at91_clk_sama7g5_register_master(struct regmap *regmap,
+diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
+index 4cb0d31babf7..5f6fa89571b7 100644
+--- a/drivers/clk/at91/sam9x60.c
++++ b/drivers/clk/at91/sam9x60.c
+@@ -8,6 +8,7 @@
+ #include "pmc.h"
+
+ static DEFINE_SPINLOCK(pmc_pll_lock);
++static DEFINE_SPINLOCK(mck_lock);
+
+ static const struct clk_master_characteristics mck_characteristics = {
+ .output = { .min = 140000000, .max = 200000000 },
+@@ -76,11 +77,11 @@ static const struct {
+ char *p;
+ u8 id;
+ } sam9x60_systemck[] = {
+- { .n = "ddrck", .p = "masterck", .id = 2 },
++ { .n = "ddrck", .p = "masterck_div", .id = 2 },
+ { .n = "uhpck", .p = "usbck", .id = 6 },
+ { .n = "pck0", .p = "prog0", .id = 8 },
+ { .n = "pck1", .p = "prog1", .id = 9 },
+- { .n = "qspick", .p = "masterck", .id = 19 },
++ { .n = "qspick", .p = "masterck_div", .id = 19 },
+ };
+
+ static const struct {
+@@ -268,9 +269,17 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
+ parent_names[0] = md_slck_name;
+ parent_names[1] = "mainck";
+ parent_names[2] = "pllack_divck";
+- hw = at91_clk_register_master(regmap, "masterck", 3, parent_names,
+- &sam9x60_master_layout,
+- &mck_characteristics);
++ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 3,
++ parent_names, &sam9x60_master_layout,
++ &mck_characteristics, &mck_lock,
++ CLK_SET_RATE_GATE, INT_MIN);
++ if (IS_ERR(hw))
++ goto err_free;
++
++ hw = at91_clk_register_master_div(regmap, "masterck_div",
++ "masterck_pres", &sam9x60_master_layout,
++ &mck_characteristics, &mck_lock,
++ CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -286,7 +295,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
+ parent_names[0] = md_slck_name;
+ parent_names[1] = td_slck_name;
+ parent_names[2] = "mainck";
+- parent_names[3] = "masterck";
++ parent_names[3] = "masterck_div";
+ parent_names[4] = "pllack_divck";
+ parent_names[5] = "upllck_divck";
+ for (i = 0; i < 2; i++) {
+@@ -318,7 +327,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ &sam9x60_pcr_layout,
+ sam9x60_periphck[i].n,
+- "masterck",
++ "masterck_div",
+ sam9x60_periphck[i].id,
+ &range, INT_MIN);
+ if (IS_ERR(hw))
+diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
+index 8b220762941a..9a5cbc7cd55a 100644
+--- a/drivers/clk/at91/sama5d2.c
++++ b/drivers/clk/at91/sama5d2.c
+@@ -7,6 +7,8 @@
+
+ #include "pmc.h"
+
++static DEFINE_SPINLOCK(mck_lock);
++
+ static const struct clk_master_characteristics mck_characteristics = {
+ .output = { .min = 124000000, .max = 166000000 },
+ .divisors = { 1, 2, 4, 3 },
+@@ -40,14 +42,14 @@ static const struct {
+ char *p;
+ u8 id;
+ } sama5d2_systemck[] = {
+- { .n = "ddrck", .p = "masterck", .id = 2 },
+- { .n = "lcdck", .p = "masterck", .id = 3 },
+- { .n = "uhpck", .p = "usbck", .id = 6 },
+- { .n = "udpck", .p = "usbck", .id = 7 },
+- { .n = "pck0", .p = "prog0", .id = 8 },
+- { .n = "pck1", .p = "prog1", .id = 9 },
+- { .n = "pck2", .p = "prog2", .id = 10 },
+- { .n = "iscck", .p = "masterck", .id = 18 },
++ { .n = "ddrck", .p = "masterck_div", .id = 2 },
++ { .n = "lcdck", .p = "masterck_div", .id = 3 },
++ { .n = "uhpck", .p = "usbck", .id = 6 },
++ { .n = "udpck", .p = "usbck", .id = 7 },
++ { .n = "pck0", .p = "prog0", .id = 8 },
++ { .n = "pck1", .p = "prog1", .id = 9 },
++ { .n = "pck2", .p = "prog2", .id = 10 },
++ { .n = "iscck", .p = "masterck_div", .id = 18 },
+ };
+
+ static const struct {
+@@ -235,15 +237,25 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+- &at91sam9x5_master_layout,
+- &mck_characteristics);
++ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
++ parent_names,
++ &at91sam9x5_master_layout,
++ &mck_characteristics, &mck_lock,
++ CLK_SET_RATE_GATE, INT_MIN);
++ if (IS_ERR(hw))
++ goto err_free;
++
++ hw = at91_clk_register_master_div(regmap, "masterck_div",
++ "masterck_pres",
++ &at91sam9x5_master_layout,
++ &mck_characteristics, &mck_lock,
++ CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d2_pmc->chws[PMC_MCK] = hw;
+
+- hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck");
++ hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck_div");
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -259,7 +271,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+- parent_names[4] = "masterck";
++ parent_names[4] = "masterck_div";
+ parent_names[5] = "audiopll_pmcck";
+ for (i = 0; i < 3; i++) {
+ char name[6];
+@@ -290,7 +302,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ &sama5d2_pcr_layout,
+ sama5d2_periphck[i].n,
+- "masterck",
++ "masterck_div",
+ sama5d2_periphck[i].id,
+ &range, INT_MIN);
+ if (IS_ERR(hw))
+@@ -317,7 +329,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+- parent_names[4] = "masterck";
++ parent_names[4] = "masterck_div";
+ parent_names[5] = "audiopll_pmcck";
+ for (i = 0; i < ARRAY_SIZE(sama5d2_gck); i++) {
+ hw = at91_clk_register_generated(regmap, &pmc_pcr_lock,
+diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
+index 7c6e0a5b9dc8..87009ee8effc 100644
+--- a/drivers/clk/at91/sama5d3.c
++++ b/drivers/clk/at91/sama5d3.c
+@@ -7,6 +7,8 @@
+
+ #include "pmc.h"
+
++static DEFINE_SPINLOCK(mck_lock);
++
+ static const struct clk_master_characteristics mck_characteristics = {
+ .output = { .min = 0, .max = 166000000 },
+ .divisors = { 1, 2, 4, 3 },
+@@ -40,14 +42,14 @@ static const struct {
+ char *p;
+ u8 id;
+ } sama5d3_systemck[] = {
+- { .n = "ddrck", .p = "masterck", .id = 2 },
+- { .n = "lcdck", .p = "masterck", .id = 3 },
+- { .n = "smdck", .p = "smdclk", .id = 4 },
+- { .n = "uhpck", .p = "usbck", .id = 6 },
+- { .n = "udpck", .p = "usbck", .id = 7 },
+- { .n = "pck0", .p = "prog0", .id = 8 },
+- { .n = "pck1", .p = "prog1", .id = 9 },
+- { .n = "pck2", .p = "prog2", .id = 10 },
++ { .n = "ddrck", .p = "masterck_div", .id = 2 },
++ { .n = "lcdck", .p = "masterck_div", .id = 3 },
++ { .n = "smdck", .p = "smdclk", .id = 4 },
++ { .n = "uhpck", .p = "usbck", .id = 6 },
++ { .n = "udpck", .p = "usbck", .id = 7 },
++ { .n = "pck0", .p = "prog0", .id = 8 },
++ { .n = "pck1", .p = "prog1", .id = 9 },
++ { .n = "pck2", .p = "prog2", .id = 10 },
+ };
+
+ static const struct {
+@@ -170,9 +172,19 @@ static void __init sama5d3_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+- &at91sam9x5_master_layout,
+- &mck_characteristics);
++ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
++ parent_names,
++ &at91sam9x5_master_layout,
++ &mck_characteristics, &mck_lock,
++ CLK_SET_RATE_GATE, INT_MIN);
++ if (IS_ERR(hw))
++ goto err_free;
++
++ hw = at91_clk_register_master_div(regmap, "masterck_div",
++ "masterck_pres",
++ &at91sam9x5_master_layout,
++ &mck_characteristics, &mck_lock,
++ CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -192,7 +204,7 @@ static void __init sama5d3_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+- parent_names[4] = "masterck";
++ parent_names[4] = "masterck_div";
+ for (i = 0; i < 3; i++) {
+ char name[6];
+
+@@ -222,7 +234,7 @@ static void __init sama5d3_pmc_setup(struct device_node *np)
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ &sama5d3_pcr_layout,
+ sama5d3_periphck[i].n,
+- "masterck",
++ "masterck_div",
+ sama5d3_periphck[i].id,
+ &sama5d3_periphck[i].r,
+ INT_MIN);
+diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
+index 92d8d4141b43..57fff790188b 100644
+--- a/drivers/clk/at91/sama5d4.c
++++ b/drivers/clk/at91/sama5d4.c
+@@ -7,6 +7,8 @@
+
+ #include "pmc.h"
+
++static DEFINE_SPINLOCK(mck_lock);
++
+ static const struct clk_master_characteristics mck_characteristics = {
+ .output = { .min = 125000000, .max = 200000000 },
+ .divisors = { 1, 2, 4, 3 },
+@@ -39,14 +41,14 @@ static const struct {
+ char *p;
+ u8 id;
+ } sama5d4_systemck[] = {
+- { .n = "ddrck", .p = "masterck", .id = 2 },
+- { .n = "lcdck", .p = "masterck", .id = 3 },
+- { .n = "smdck", .p = "smdclk", .id = 4 },
+- { .n = "uhpck", .p = "usbck", .id = 6 },
+- { .n = "udpck", .p = "usbck", .id = 7 },
+- { .n = "pck0", .p = "prog0", .id = 8 },
+- { .n = "pck1", .p = "prog1", .id = 9 },
+- { .n = "pck2", .p = "prog2", .id = 10 },
++ { .n = "ddrck", .p = "masterck_div", .id = 2 },
++ { .n = "lcdck", .p = "masterck_div", .id = 3 },
++ { .n = "smdck", .p = "smdclk", .id = 4 },
++ { .n = "uhpck", .p = "usbck", .id = 6 },
++ { .n = "udpck", .p = "usbck", .id = 7 },
++ { .n = "pck0", .p = "prog0", .id = 8 },
++ { .n = "pck1", .p = "prog1", .id = 9 },
++ { .n = "pck2", .p = "prog2", .id = 10 },
+ };
+
+ static const struct {
+@@ -185,15 +187,25 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+- hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
+- &at91sam9x5_master_layout,
+- &mck_characteristics);
++ hw = at91_clk_register_master_pres(regmap, "masterck_pres", 4,
++ parent_names,
++ &at91sam9x5_master_layout,
++ &mck_characteristics, &mck_lock,
++ CLK_SET_RATE_GATE, INT_MIN);
++ if (IS_ERR(hw))
++ goto err_free;
++
++ hw = at91_clk_register_master_div(regmap, "masterck_div",
++ "masterck_pres",
++ &at91sam9x5_master_layout,
++ &mck_characteristics, &mck_lock,
++ CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ goto err_free;
+
+ sama5d4_pmc->chws[PMC_MCK] = hw;
+
+- hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck");
++ hw = at91_clk_register_h32mx(regmap, "h32mxck", "masterck_div");
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -215,7 +227,7 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "plladivck";
+ parent_names[3] = "utmick";
+- parent_names[4] = "masterck";
++ parent_names[4] = "masterck_div";
+ for (i = 0; i < 3; i++) {
+ char name[6];
+
+@@ -245,7 +257,7 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
+ hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
+ &sama5d4_pcr_layout,
+ sama5d4_periphck[i].n,
+- "masterck",
++ "masterck_div",
+ sama5d4_periphck[i].id,
+ &range, INT_MIN);
+ if (IS_ERR(hw))
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index e0c4d2eb9f59..927eb3b2b126 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -32,6 +32,7 @@
+ } while (0)
+
+ static DEFINE_SPINLOCK(pmc_pll_lock);
++static DEFINE_SPINLOCK(pmc_mck0_lock);
+ static DEFINE_SPINLOCK(pmc_mckX_lock);
+
+ /**
+@@ -984,8 +985,16 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ parent_names[1] = "mainck";
+ parent_names[2] = "cpupll_divpmcck";
+ parent_names[3] = "syspll_divpmcck";
+- hw = at91_clk_register_master(regmap, "mck0", 4, parent_names,
+- &mck0_layout, &mck0_characteristics);
++ hw = at91_clk_register_master_pres(regmap, "mck0_pres", 4, parent_names,
++ &mck0_layout, &mck0_characteristics,
++ &pmc_mck0_lock,
++ CLK_SET_RATE_PARENT, 0);
++ if (IS_ERR(hw))
++ goto err_free;
++
++ hw = at91_clk_register_master_div(regmap, "mck0_div", "mck0_pres",
++ &mck0_layout, &mck0_characteristics,
++ &pmc_mck0_lock, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/111-clk-at91-sama7g5-register-cpu-clock.patch b/target/linux/at91/patches-5.10/111-clk-at91-sama7g5-register-cpu-clock.patch
new file mode 100644
index 0000000000..9fb36e005f
--- /dev/null
+++ b/target/linux/at91/patches-5.10/111-clk-at91-sama7g5-register-cpu-clock.patch
@@ -0,0 +1,72 @@
+From 36e97c421dd9f866e31fe14bcb7af01334791890 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 19 Nov 2020 17:43:17 +0200
+Subject: [PATCH 111/247] clk: at91: sama7g5: register cpu clock
+
+Register CPU clock as being the master clock prescaler. This would
+be used by DVFS. The block schema of SAMA7G5's PMC contains also a divider
+between master clock prescaler and CPU (PMC_CPU_RATIO.RATIO) but the
+frequencies supported by SAMA7G5 could be directly received from
+CPUPLL + master clock prescaler and the extra divider would do no work in
+case it would be enabled.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605800597-16720-12-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/sama7g5.c | 13 ++++++-------
+ include/dt-bindings/clock/at91.h | 1 +
+ 2 files changed, 7 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index 927eb3b2b126..a6e20b35960e 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -904,7 +904,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ if (IS_ERR(regmap))
+ return;
+
+- sama7g5_pmc = pmc_data_allocate(PMC_ETHPLL + 1,
++ sama7g5_pmc = pmc_data_allocate(PMC_CPU + 1,
+ nck(sama7g5_systemck),
+ nck(sama7g5_periphck),
+ nck(sama7g5_gck), 8);
+@@ -981,18 +981,17 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ }
+ }
+
+- parent_names[0] = md_slck_name;
+- parent_names[1] = "mainck";
+- parent_names[2] = "cpupll_divpmcck";
+- parent_names[3] = "syspll_divpmcck";
+- hw = at91_clk_register_master_pres(regmap, "mck0_pres", 4, parent_names,
++ parent_names[0] = "cpupll_divpmcck";
++ hw = at91_clk_register_master_pres(regmap, "cpuck", 1, parent_names,
+ &mck0_layout, &mck0_characteristics,
+ &pmc_mck0_lock,
+ CLK_SET_RATE_PARENT, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+- hw = at91_clk_register_master_div(regmap, "mck0_div", "mck0_pres",
++ sama7g5_pmc->chws[PMC_CPU] = hw;
++
++ hw = at91_clk_register_master_div(regmap, "mck0", "cpuck",
+ &mck0_layout, &mck0_characteristics,
+ &pmc_mck0_lock, 0);
+ if (IS_ERR(hw))
+diff --git a/include/dt-bindings/clock/at91.h b/include/dt-bindings/clock/at91.h
+index fab313f62e8f..98e1b2ab6403 100644
+--- a/include/dt-bindings/clock/at91.h
++++ b/include/dt-bindings/clock/at91.h
+@@ -34,6 +34,7 @@
+ #define PMC_AUDIOPMCPLL (PMC_MAIN + 6)
+ #define PMC_AUDIOIOPLL (PMC_MAIN + 7)
+ #define PMC_ETHPLL (PMC_MAIN + 8)
++#define PMC_CPU (PMC_MAIN + 9)
+
+ #ifndef AT91_PMC_MOSCS
+ #define AT91_PMC_MOSCS 0 /* MOSCS Flag */
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/112-clk-at91-Fix-the-declaration-of-the-clocks.patch b/target/linux/at91/patches-5.10/112-clk-at91-Fix-the-declaration-of-the-clocks.patch
new file mode 100644
index 0000000000..42d4769354
--- /dev/null
+++ b/target/linux/at91/patches-5.10/112-clk-at91-Fix-the-declaration-of-the-clocks.patch
@@ -0,0 +1,202 @@
+From 5a25e2437af0db535b17da352fb16680a8dfdeda Mon Sep 17 00:00:00 2001
+From: Tudor Ambarus <tudor.ambarus@microchip.com>
+Date: Wed, 3 Feb 2021 17:43:32 +0200
+Subject: [PATCH 112/247] clk: at91: Fix the declaration of the clocks
+
+These are all "early clocks" that require initialization just at
+of_clk_init() time. Use CLK_OF_DECLARE() to declare them.
+
+This also fixes a problem that was spotted when fw_devlink was
+set to 'on' by default: the boards failed to boot. The reason is
+that CLK_OF_DECLARE_DRIVER() clears the OF_POPULATED and causes
+the consumers of the clock to be postponed by fw_devlink until
+the second initialization routine of the clock has been completed.
+One of the consumers of the clock is the timer, which is used as a
+clocksource, and needs the clock initialized early. Postponing the
+timers caused the fail at boot.
+
+Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
+Link: https://lore.kernel.org/r/20210203154332.470587-1-tudor.ambarus@microchip.com
+Acked-by: Saravana Kannan <saravanak@google.com>
+Tested-by: Eugen Hristev <eugen.hristev@microchip.com>
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/at91rm9200.c | 3 +--
+ drivers/clk/at91/at91sam9260.c | 16 ++++++++--------
+ drivers/clk/at91/at91sam9g45.c | 3 +--
+ drivers/clk/at91/at91sam9n12.c | 3 +--
+ drivers/clk/at91/at91sam9rl.c | 3 ++-
+ drivers/clk/at91/at91sam9x5.c | 20 ++++++++++----------
+ drivers/clk/at91/sama5d2.c | 3 ++-
+ drivers/clk/at91/sama5d3.c | 2 +-
+ drivers/clk/at91/sama5d4.c | 3 ++-
+ 9 files changed, 28 insertions(+), 28 deletions(-)
+
+diff --git a/drivers/clk/at91/at91rm9200.c b/drivers/clk/at91/at91rm9200.c
+index 0fad1009f315..428a6f4b9ebc 100644
+--- a/drivers/clk/at91/at91rm9200.c
++++ b/drivers/clk/at91/at91rm9200.c
+@@ -215,5 +215,4 @@ static void __init at91rm9200_pmc_setup(struct device_node *np)
+ * deferring properly. Once this is fixed, this can be switched to a platform
+ * driver.
+ */
+-CLK_OF_DECLARE_DRIVER(at91rm9200_pmc, "atmel,at91rm9200-pmc",
+- at91rm9200_pmc_setup);
++CLK_OF_DECLARE(at91rm9200_pmc, "atmel,at91rm9200-pmc", at91rm9200_pmc_setup);
+diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
+index ceb5495f723a..b29843bea278 100644
+--- a/drivers/clk/at91/at91sam9260.c
++++ b/drivers/clk/at91/at91sam9260.c
+@@ -491,26 +491,26 @@ static void __init at91sam9260_pmc_setup(struct device_node *np)
+ {
+ at91sam926x_pmc_setup(np, &at91sam9260_data);
+ }
+-CLK_OF_DECLARE_DRIVER(at91sam9260_pmc, "atmel,at91sam9260-pmc",
+- at91sam9260_pmc_setup);
++
++CLK_OF_DECLARE(at91sam9260_pmc, "atmel,at91sam9260-pmc", at91sam9260_pmc_setup);
+
+ static void __init at91sam9261_pmc_setup(struct device_node *np)
+ {
+ at91sam926x_pmc_setup(np, &at91sam9261_data);
+ }
+-CLK_OF_DECLARE_DRIVER(at91sam9261_pmc, "atmel,at91sam9261-pmc",
+- at91sam9261_pmc_setup);
++
++CLK_OF_DECLARE(at91sam9261_pmc, "atmel,at91sam9261-pmc", at91sam9261_pmc_setup);
+
+ static void __init at91sam9263_pmc_setup(struct device_node *np)
+ {
+ at91sam926x_pmc_setup(np, &at91sam9263_data);
+ }
+-CLK_OF_DECLARE_DRIVER(at91sam9263_pmc, "atmel,at91sam9263-pmc",
+- at91sam9263_pmc_setup);
++
++CLK_OF_DECLARE(at91sam9263_pmc, "atmel,at91sam9263-pmc", at91sam9263_pmc_setup);
+
+ static void __init at91sam9g20_pmc_setup(struct device_node *np)
+ {
+ at91sam926x_pmc_setup(np, &at91sam9g20_data);
+ }
+-CLK_OF_DECLARE_DRIVER(at91sam9g20_pmc, "atmel,at91sam9g20-pmc",
+- at91sam9g20_pmc_setup);
++
++CLK_OF_DECLARE(at91sam9g20_pmc, "atmel,at91sam9g20-pmc", at91sam9g20_pmc_setup);
+diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c
+index 0214333dedd3..15da0dfe3ef2 100644
+--- a/drivers/clk/at91/at91sam9g45.c
++++ b/drivers/clk/at91/at91sam9g45.c
+@@ -228,5 +228,4 @@ static void __init at91sam9g45_pmc_setup(struct device_node *np)
+ * The TCB is used as the clocksource so its clock is needed early. This means
+ * this can't be a platform driver.
+ */
+-CLK_OF_DECLARE_DRIVER(at91sam9g45_pmc, "atmel,at91sam9g45-pmc",
+- at91sam9g45_pmc_setup);
++CLK_OF_DECLARE(at91sam9g45_pmc, "atmel,at91sam9g45-pmc", at91sam9g45_pmc_setup);
+diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c
+index f9db5316a7f1..7fe435f4b46b 100644
+--- a/drivers/clk/at91/at91sam9n12.c
++++ b/drivers/clk/at91/at91sam9n12.c
+@@ -255,5 +255,4 @@ static void __init at91sam9n12_pmc_setup(struct device_node *np)
+ * The TCB is used as the clocksource so its clock is needed early. This means
+ * this can't be a platform driver.
+ */
+-CLK_OF_DECLARE_DRIVER(at91sam9n12_pmc, "atmel,at91sam9n12-pmc",
+- at91sam9n12_pmc_setup);
++CLK_OF_DECLARE(at91sam9n12_pmc, "atmel,at91sam9n12-pmc", at91sam9n12_pmc_setup);
+diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c
+index 66736e03cfef..ecbabf5162bd 100644
+--- a/drivers/clk/at91/at91sam9rl.c
++++ b/drivers/clk/at91/at91sam9rl.c
+@@ -186,4 +186,5 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
+ err_free:
+ kfree(at91sam9rl_pmc);
+ }
+-CLK_OF_DECLARE_DRIVER(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup);
++
++CLK_OF_DECLARE(at91sam9rl_pmc, "atmel,at91sam9rl-pmc", at91sam9rl_pmc_setup);
+diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
+index 79b9d3667228..5cce48c64ea2 100644
+--- a/drivers/clk/at91/at91sam9x5.c
++++ b/drivers/clk/at91/at91sam9x5.c
+@@ -302,33 +302,33 @@ static void __init at91sam9g15_pmc_setup(struct device_node *np)
+ {
+ at91sam9x5_pmc_setup(np, at91sam9g15_periphck, true);
+ }
+-CLK_OF_DECLARE_DRIVER(at91sam9g15_pmc, "atmel,at91sam9g15-pmc",
+- at91sam9g15_pmc_setup);
++
++CLK_OF_DECLARE(at91sam9g15_pmc, "atmel,at91sam9g15-pmc", at91sam9g15_pmc_setup);
+
+ static void __init at91sam9g25_pmc_setup(struct device_node *np)
+ {
+ at91sam9x5_pmc_setup(np, at91sam9g25_periphck, false);
+ }
+-CLK_OF_DECLARE_DRIVER(at91sam9g25_pmc, "atmel,at91sam9g25-pmc",
+- at91sam9g25_pmc_setup);
++
++CLK_OF_DECLARE(at91sam9g25_pmc, "atmel,at91sam9g25-pmc", at91sam9g25_pmc_setup);
+
+ static void __init at91sam9g35_pmc_setup(struct device_node *np)
+ {
+ at91sam9x5_pmc_setup(np, at91sam9g35_periphck, true);
+ }
+-CLK_OF_DECLARE_DRIVER(at91sam9g35_pmc, "atmel,at91sam9g35-pmc",
+- at91sam9g35_pmc_setup);
++
++CLK_OF_DECLARE(at91sam9g35_pmc, "atmel,at91sam9g35-pmc", at91sam9g35_pmc_setup);
+
+ static void __init at91sam9x25_pmc_setup(struct device_node *np)
+ {
+ at91sam9x5_pmc_setup(np, at91sam9x25_periphck, false);
+ }
+-CLK_OF_DECLARE_DRIVER(at91sam9x25_pmc, "atmel,at91sam9x25-pmc",
+- at91sam9x25_pmc_setup);
++
++CLK_OF_DECLARE(at91sam9x25_pmc, "atmel,at91sam9x25-pmc", at91sam9x25_pmc_setup);
+
+ static void __init at91sam9x35_pmc_setup(struct device_node *np)
+ {
+ at91sam9x5_pmc_setup(np, at91sam9x35_periphck, true);
+ }
+-CLK_OF_DECLARE_DRIVER(at91sam9x35_pmc, "atmel,at91sam9x35-pmc",
+- at91sam9x35_pmc_setup);
++
++CLK_OF_DECLARE(at91sam9x35_pmc, "atmel,at91sam9x35-pmc", at91sam9x35_pmc_setup);
+diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
+index 9a5cbc7cd55a..3d1f78176c3e 100644
+--- a/drivers/clk/at91/sama5d2.c
++++ b/drivers/clk/at91/sama5d2.c
+@@ -372,4 +372,5 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
+ err_free:
+ kfree(sama5d2_pmc);
+ }
+-CLK_OF_DECLARE_DRIVER(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
++
++CLK_OF_DECLARE(sama5d2_pmc, "atmel,sama5d2-pmc", sama5d2_pmc_setup);
+diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
+index 87009ee8effc..d376257807d2 100644
+--- a/drivers/clk/at91/sama5d3.c
++++ b/drivers/clk/at91/sama5d3.c
+@@ -255,4 +255,4 @@ static void __init sama5d3_pmc_setup(struct device_node *np)
+ * The TCB is used as the clocksource so its clock is needed early. This means
+ * this can't be a platform driver.
+ */
+-CLK_OF_DECLARE_DRIVER(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
++CLK_OF_DECLARE(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
+diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
+index 57fff790188b..5cbaac68da44 100644
+--- a/drivers/clk/at91/sama5d4.c
++++ b/drivers/clk/at91/sama5d4.c
+@@ -286,4 +286,5 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
+ err_free:
+ kfree(sama5d4_pmc);
+ }
+-CLK_OF_DECLARE_DRIVER(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
++
++CLK_OF_DECLARE(sama5d4_pmc, "atmel,sama5d4-pmc", sama5d4_pmc_setup);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/113-clk-at91-Trivial-typo-fixes-in-the-file-sama7g5.c.patch b/target/linux/at91/patches-5.10/113-clk-at91-Trivial-typo-fixes-in-the-file-sama7g5.c.patch
new file mode 100644
index 0000000000..9f8c67942e
--- /dev/null
+++ b/target/linux/at91/patches-5.10/113-clk-at91-Trivial-typo-fixes-in-the-file-sama7g5.c.patch
@@ -0,0 +1,50 @@
+From 268b36c42b7d1e480dd56ecfec626a46f4b5975e Mon Sep 17 00:00:00 2001
+From: Bhaskar Chowdhury <unixbhaskar@gmail.com>
+Date: Sat, 13 Mar 2021 11:02:22 +0530
+Subject: [PATCH 113/247] clk: at91: Trivial typo fixes in the file sama7g5.c
+
+s/critial/critical/ ......two different places
+s/parrent/parent/
+
+Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
+Link: https://lore.kernel.org/r/20210313053222.14706-1-unixbhaskar@gmail.com
+Acked-by: Randy Dunlap <rdunlap@infradead.org>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/sama7g5.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index a6e20b35960e..9e1ec48c4474 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -166,7 +166,7 @@ static const struct {
+ .c = &pll_characteristics,
+ .t = PLL_TYPE_FRAC,
+ /*
+- * This feeds syspll_divpmcck which may feed critial parts
++ * This feeds syspll_divpmcck which may feed critical parts
+ * of the systems like timers. Therefore it should not be
+ * disabled.
+ */
+@@ -178,7 +178,7 @@ static const struct {
+ .c = &pll_characteristics,
+ .t = PLL_TYPE_DIV,
+ /*
+- * This may feed critial parts of the systems like timers.
++ * This may feed critical parts of the systems like timers.
+ * Therefore it should not be disabled.
+ */
+ .f = CLK_IS_CRITICAL | CLK_SET_RATE_GATE,
+@@ -455,7 +455,7 @@ static const struct {
+ * @pp: PLL parents
+ * @pp_mux_table: PLL parents mux table
+ * @r: clock output range
+- * @pp_chg_id: id in parrent array of changeable PLL parent
++ * @pp_chg_id: id in parent array of changeable PLL parent
+ * @pp_count: PLL parents count
+ * @id: clock id
+ */
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/114-clk-at91-sama7g5-remove-all-kernel-doc-kernel-doc-wa.patch b/target/linux/at91/patches-5.10/114-clk-at91-sama7g5-remove-all-kernel-doc-kernel-doc-wa.patch
new file mode 100644
index 0000000000..f13be0bfd7
--- /dev/null
+++ b/target/linux/at91/patches-5.10/114-clk-at91-sama7g5-remove-all-kernel-doc-kernel-doc-wa.patch
@@ -0,0 +1,95 @@
+From 9997227090cf529675aeb775585ec9f6c2f0f131 Mon Sep 17 00:00:00 2001
+From: Randy Dunlap <rdunlap@infradead.org>
+Date: Thu, 19 Aug 2021 15:32:37 -0700
+Subject: [PATCH 114/247] clk: at91: sama7g5: remove all kernel-doc &
+ kernel-doc warnings
+
+Remove all "/**" kernel-doc markers from sama7g5.c since they are
+all internal to this driver source file only.
+This eliminates 14 warnings that were reported by the kernel test robot.
+
+Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
+Reported-by: kernel test robot <lkp@intel.com>
+Cc: Claudiu Beznea <claudiu.beznea@microchip.com>
+Cc: Michael Turquette <mturquette@baylibre.com>
+Cc: Stephen Boyd <sboyd@kernel.org>
+Cc: Eugen Hristev <eugen.hristev@microchip.com>
+Cc: linux-clk@vger.kernel.org
+Cc: linux-arm-kernel@lists.infradead.org
+Link: https://lore.kernel.org/r/20210819223237.20115-1-rdunlap@infradead.org
+Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/sama7g5.c | 14 +++++++-------
+ 1 file changed, 7 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index 9e1ec48c4474..cf8c079aa086 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -35,7 +35,7 @@ static DEFINE_SPINLOCK(pmc_pll_lock);
+ static DEFINE_SPINLOCK(pmc_mck0_lock);
+ static DEFINE_SPINLOCK(pmc_mckX_lock);
+
+-/**
++/*
+ * PLL clocks identifiers
+ * @PLL_ID_CPU: CPU PLL identifier
+ * @PLL_ID_SYS: System PLL identifier
+@@ -56,7 +56,7 @@ enum pll_ids {
+ PLL_ID_MAX,
+ };
+
+-/**
++/*
+ * PLL type identifiers
+ * @PLL_TYPE_FRAC: fractional PLL identifier
+ * @PLL_TYPE_DIV: divider PLL identifier
+@@ -118,7 +118,7 @@ static const struct clk_pll_characteristics pll_characteristics = {
+ .output = pll_outputs,
+ };
+
+-/**
++/*
+ * PLL clocks description
+ * @n: clock name
+ * @p: clock parent
+@@ -285,7 +285,7 @@ static const struct {
+ },
+ };
+
+-/**
++/*
+ * Master clock (MCK[1..4]) description
+ * @n: clock name
+ * @ep: extra parents names array
+@@ -337,7 +337,7 @@ static const struct {
+ .c = 1, },
+ };
+
+-/**
++/*
+ * System clock description
+ * @n: clock name
+ * @p: clock parent name
+@@ -361,7 +361,7 @@ static const struct {
+ /* Mux table for programmable clocks. */
+ static u32 sama7g5_prog_mux_table[] = { 0, 1, 2, 5, 6, 7, 8, 9, 10, };
+
+-/**
++/*
+ * Peripheral clock description
+ * @n: clock name
+ * @p: clock parent name
+@@ -449,7 +449,7 @@ static const struct {
+ { .n = "uhphs_clk", .p = "mck1", .id = 106, },
+ };
+
+-/**
++/*
+ * Generic clock description
+ * @n: clock name
+ * @pp: PLL parents
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/115-net-macb-add-userio-bits-as-platform-configuration.patch b/target/linux/at91/patches-5.10/115-net-macb-add-userio-bits-as-platform-configuration.patch
new file mode 100644
index 0000000000..ce5a2ebc40
--- /dev/null
+++ b/target/linux/at91/patches-5.10/115-net-macb-add-userio-bits-as-platform-configuration.patch
@@ -0,0 +1,186 @@
+From 89f37ac2780d113d3c17d329726c0e92a1400744 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 9 Dec 2020 15:03:32 +0200
+Subject: [PATCH 115/247] net: macb: add userio bits as platform configuration
+
+This is necessary for SAMA7G5 as it uses different values for
+PHY interface and also introduces hdfctlen bit.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/cadence/macb.h | 10 +++++++++
+ drivers/net/ethernet/cadence/macb_main.c | 28 ++++++++++++++++++++----
+ 2 files changed, 34 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
+index 5de47f6fde5a..e9385a1390a9 100644
+--- a/drivers/net/ethernet/cadence/macb.h
++++ b/drivers/net/ethernet/cadence/macb.h
+@@ -1104,6 +1104,14 @@ struct macb_pm_data {
+ u32 usrio;
+ };
+
++struct macb_usrio_config {
++ u32 mii;
++ u32 rmii;
++ u32 rgmii;
++ u32 refclk;
++ u32 hdfctlen;
++};
++
+ struct macb_config {
+ u32 caps;
+ unsigned int dma_burst_length;
+@@ -1112,6 +1120,7 @@ struct macb_config {
+ struct clk **rx_clk, struct clk **tsu_clk);
+ int (*init)(struct platform_device *pdev);
+ int jumbo_max_len;
++ const struct macb_usrio_config *usrio;
+ };
+
+ struct tsu_incr {
+@@ -1244,6 +1253,7 @@ struct macb {
+ u32 rx_intr_mask;
+
+ struct macb_pm_data pm_data;
++ const struct macb_usrio_config *usrio;
+ };
+
+ #ifdef CONFIG_MACB_USE_HWSTAMP
+diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
+index 1e8bf6b9834b..a8326b75eca8 100644
+--- a/drivers/net/ethernet/cadence/macb_main.c
++++ b/drivers/net/ethernet/cadence/macb_main.c
+@@ -3800,15 +3800,15 @@ static int macb_init(struct platform_device *pdev)
+ if (!(bp->caps & MACB_CAPS_USRIO_DISABLED)) {
+ val = 0;
+ if (phy_interface_mode_is_rgmii(bp->phy_interface))
+- val = GEM_BIT(RGMII);
++ val = bp->usrio->rgmii;
+ else if (bp->phy_interface == PHY_INTERFACE_MODE_RMII &&
+ (bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII))
+- val = MACB_BIT(RMII);
++ val = bp->usrio->rmii;
+ else if (!(bp->caps & MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII))
+- val = MACB_BIT(MII);
++ val = bp->usrio->mii;
+
+ if (bp->caps & MACB_CAPS_USRIO_HAS_CLKEN)
+- val |= MACB_BIT(CLKEN);
++ val |= bp->usrio->refclk;
+
+ macb_or_gem_writel(bp, USRIO, val);
+ }
+@@ -4326,6 +4326,13 @@ static int fu540_c000_init(struct platform_device *pdev)
+ return macb_init(pdev);
+ }
+
++static const struct macb_usrio_config macb_default_usrio = {
++ .mii = MACB_BIT(MII),
++ .rmii = MACB_BIT(RMII),
++ .rgmii = GEM_BIT(RGMII),
++ .refclk = MACB_BIT(CLKEN),
++};
++
+ static const struct macb_config fu540_c000_config = {
+ .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO |
+ MACB_CAPS_GEM_HAS_PTP,
+@@ -4333,12 +4340,14 @@ static const struct macb_config fu540_c000_config = {
+ .clk_init = fu540_c000_clk_init,
+ .init = fu540_c000_init,
+ .jumbo_max_len = 10240,
++ .usrio = &macb_default_usrio,
+ };
+
+ static const struct macb_config at91sam9260_config = {
+ .caps = MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
++ .usrio = &macb_default_usrio,
+ };
+
+ static const struct macb_config sama5d3macb_config = {
+@@ -4346,6 +4355,7 @@ static const struct macb_config sama5d3macb_config = {
+ | MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
++ .usrio = &macb_default_usrio,
+ };
+
+ static const struct macb_config pc302gem_config = {
+@@ -4353,6 +4363,7 @@ static const struct macb_config pc302gem_config = {
+ .dma_burst_length = 16,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
++ .usrio = &macb_default_usrio,
+ };
+
+ static const struct macb_config sama5d2_config = {
+@@ -4360,6 +4371,7 @@ static const struct macb_config sama5d2_config = {
+ .dma_burst_length = 16,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
++ .usrio = &macb_default_usrio,
+ };
+
+ static const struct macb_config sama5d3_config = {
+@@ -4369,6 +4381,7 @@ static const struct macb_config sama5d3_config = {
+ .clk_init = macb_clk_init,
+ .init = macb_init,
+ .jumbo_max_len = 10240,
++ .usrio = &macb_default_usrio,
+ };
+
+ static const struct macb_config sama5d4_config = {
+@@ -4376,18 +4389,21 @@ static const struct macb_config sama5d4_config = {
+ .dma_burst_length = 4,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
++ .usrio = &macb_default_usrio,
+ };
+
+ static const struct macb_config emac_config = {
+ .caps = MACB_CAPS_NEEDS_RSTONUBR | MACB_CAPS_MACB_IS_EMAC,
+ .clk_init = at91ether_clk_init,
+ .init = at91ether_init,
++ .usrio = &macb_default_usrio,
+ };
+
+ static const struct macb_config np4_config = {
+ .caps = MACB_CAPS_USRIO_DISABLED,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
++ .usrio = &macb_default_usrio,
+ };
+
+ static const struct macb_config zynqmp_config = {
+@@ -4398,6 +4414,7 @@ static const struct macb_config zynqmp_config = {
+ .clk_init = macb_clk_init,
+ .init = macb_init,
+ .jumbo_max_len = 10240,
++ .usrio = &macb_default_usrio,
+ };
+
+ static const struct macb_config zynq_config = {
+@@ -4406,6 +4423,7 @@ static const struct macb_config zynq_config = {
+ .dma_burst_length = 16,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
++ .usrio = &macb_default_usrio,
+ };
+
+ static const struct of_device_id macb_dt_ids[] = {
+@@ -4527,6 +4545,8 @@ static int macb_probe(struct platform_device *pdev)
+ bp->wol |= MACB_WOL_HAS_MAGIC_PACKET;
+ device_set_wakeup_capable(&pdev->dev, bp->wol & MACB_WOL_HAS_MAGIC_PACKET);
+
++ bp->usrio = macb_config->usrio;
++
+ spin_lock_init(&bp->lock);
+
+ /* setup capabilities */
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/116-net-macb-add-capability-to-not-set-the-clock-rate.patch b/target/linux/at91/patches-5.10/116-net-macb-add-capability-to-not-set-the-clock-rate.patch
new file mode 100644
index 0000000000..9b904785fc
--- /dev/null
+++ b/target/linux/at91/patches-5.10/116-net-macb-add-capability-to-not-set-the-clock-rate.patch
@@ -0,0 +1,92 @@
+From 1b15259551b701f416aa024050a2e619860bd0d8 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 9 Dec 2020 15:03:33 +0200
+Subject: [PATCH 116/247] net: macb: add capability to not set the clock rate
+
+SAMA7G5's ethernet IPs TX clock could be provided by its generic clock or
+by the external clock provided by the PHY. The internal IP logic divides
+properly this clock depending on the link speed. The patch adds a new
+capability so that macb_set_tx_clock() to not be called for IPs having
+this capability (the clock rate, in case of generic clock, is set at the
+boot time via device tree and the driver only enables it).
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/cadence/macb.h | 1 +
+ drivers/net/ethernet/cadence/macb_main.c | 18 +++++++++---------
+ 2 files changed, 10 insertions(+), 9 deletions(-)
+
+diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
+index e9385a1390a9..23d294748779 100644
+--- a/drivers/net/ethernet/cadence/macb.h
++++ b/drivers/net/ethernet/cadence/macb.h
+@@ -658,6 +658,7 @@
+ #define MACB_CAPS_GEM_HAS_PTP 0x00000040
+ #define MACB_CAPS_BD_RD_PREFETCH 0x00000080
+ #define MACB_CAPS_NEEDS_RSTONUBR 0x00000100
++#define MACB_CAPS_CLK_HW_CHG 0x04000000
+ #define MACB_CAPS_MACB_IS_EMAC 0x08000000
+ #define MACB_CAPS_FIFO_MODE 0x10000000
+ #define MACB_CAPS_GIGABIT_MODE_AVAILABLE 0x20000000
+diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
+index a8326b75eca8..5d0d11eb6711 100644
+--- a/drivers/net/ethernet/cadence/macb_main.c
++++ b/drivers/net/ethernet/cadence/macb_main.c
+@@ -457,15 +457,14 @@ static void macb_init_buffers(struct macb *bp)
+
+ /**
+ * macb_set_tx_clk() - Set a clock to a new frequency
+- * @clk: Pointer to the clock to change
++ * @bp: pointer to struct macb
+ * @speed: New frequency in Hz
+- * @dev: Pointer to the struct net_device
+ */
+-static void macb_set_tx_clk(struct clk *clk, int speed, struct net_device *dev)
++static void macb_set_tx_clk(struct macb *bp, int speed)
+ {
+ long ferr, rate, rate_rounded;
+
+- if (!clk)
++ if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
+ return;
+
+ switch (speed) {
+@@ -482,7 +481,7 @@ static void macb_set_tx_clk(struct clk *clk, int speed, struct net_device *dev)
+ return;
+ }
+
+- rate_rounded = clk_round_rate(clk, rate);
++ rate_rounded = clk_round_rate(bp->tx_clk, rate);
+ if (rate_rounded < 0)
+ return;
+
+@@ -492,11 +491,12 @@ static void macb_set_tx_clk(struct clk *clk, int speed, struct net_device *dev)
+ ferr = abs(rate_rounded - rate);
+ ferr = DIV_ROUND_UP(ferr, rate / 100000);
+ if (ferr > 5)
+- netdev_warn(dev, "unable to generate target frequency: %ld Hz\n",
++ netdev_warn(bp->dev,
++ "unable to generate target frequency: %ld Hz\n",
+ rate);
+
+- if (clk_set_rate(clk, rate_rounded))
+- netdev_err(dev, "adjusting tx_clk failed.\n");
++ if (clk_set_rate(bp->tx_clk, rate_rounded))
++ netdev_err(bp->dev, "adjusting tx_clk failed.\n");
+ }
+
+ static void macb_validate(struct phylink_config *config,
+@@ -649,7 +649,7 @@ static void macb_mac_link_up(struct phylink_config *config,
+ if (rx_pause)
+ ctrl |= MACB_BIT(PAE);
+
+- macb_set_tx_clk(bp->tx_clk, speed, ndev);
++ macb_set_tx_clk(bp, speed);
+
+ /* Initialize rings & buffers as clearing MACB_BIT(TE) in link down
+ * cleared the pipeline and control registers.
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/117-net-macb-add-function-to-disable-all-macb-clocks.patch b/target/linux/at91/patches-5.10/117-net-macb-add-function-to-disable-all-macb-clocks.patch
new file mode 100644
index 0000000000..9340c864b9
--- /dev/null
+++ b/target/linux/at91/patches-5.10/117-net-macb-add-function-to-disable-all-macb-clocks.patch
@@ -0,0 +1,87 @@
+From 935d9aae15ee245a1bc6e322cbef02566a8996cc Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 9 Dec 2020 15:03:34 +0200
+Subject: [PATCH 117/247] net: macb: add function to disable all macb clocks
+
+Add function to disable all macb clocks.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Suggested-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/cadence/macb_main.c | 38 +++++++++++++-----------
+ 1 file changed, 21 insertions(+), 17 deletions(-)
+
+diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
+index 5d0d11eb6711..eacf907a365d 100644
+--- a/drivers/net/ethernet/cadence/macb_main.c
++++ b/drivers/net/ethernet/cadence/macb_main.c
+@@ -3575,6 +3575,20 @@ static void macb_probe_queues(void __iomem *mem,
+ *num_queues = hweight32(*queue_mask);
+ }
+
++static void macb_clks_disable(struct clk *pclk, struct clk *hclk, struct clk *tx_clk,
++ struct clk *rx_clk, struct clk *tsu_clk)
++{
++ struct clk_bulk_data clks[] = {
++ { .clk = tsu_clk, },
++ { .clk = rx_clk, },
++ { .clk = pclk, },
++ { .clk = hclk, },
++ { .clk = tx_clk },
++ };
++
++ clk_bulk_disable_unprepare(ARRAY_SIZE(clks), clks);
++}
++
+ static int macb_clk_init(struct platform_device *pdev, struct clk **pclk,
+ struct clk **hclk, struct clk **tx_clk,
+ struct clk **rx_clk, struct clk **tsu_clk)
+@@ -4642,11 +4656,7 @@ static int macb_probe(struct platform_device *pdev)
+ free_netdev(dev);
+
+ err_disable_clocks:
+- clk_disable_unprepare(tx_clk);
+- clk_disable_unprepare(hclk);
+- clk_disable_unprepare(pclk);
+- clk_disable_unprepare(rx_clk);
+- clk_disable_unprepare(tsu_clk);
++ macb_clks_disable(pclk, hclk, tx_clk, rx_clk, tsu_clk);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+@@ -4671,11 +4681,8 @@ static int macb_remove(struct platform_device *pdev)
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ if (!pm_runtime_suspended(&pdev->dev)) {
+- clk_disable_unprepare(bp->tx_clk);
+- clk_disable_unprepare(bp->hclk);
+- clk_disable_unprepare(bp->pclk);
+- clk_disable_unprepare(bp->rx_clk);
+- clk_disable_unprepare(bp->tsu_clk);
++ macb_clks_disable(bp->pclk, bp->hclk, bp->tx_clk,
++ bp->rx_clk, bp->tsu_clk);
+ pm_runtime_set_suspended(&pdev->dev);
+ }
+ phylink_destroy(bp->phylink);
+@@ -4854,13 +4861,10 @@ static int __maybe_unused macb_runtime_suspend(struct device *dev)
+ struct net_device *netdev = dev_get_drvdata(dev);
+ struct macb *bp = netdev_priv(netdev);
+
+- if (!(device_may_wakeup(dev))) {
+- clk_disable_unprepare(bp->tx_clk);
+- clk_disable_unprepare(bp->hclk);
+- clk_disable_unprepare(bp->pclk);
+- clk_disable_unprepare(bp->rx_clk);
+- }
+- clk_disable_unprepare(bp->tsu_clk);
++ if (!(device_may_wakeup(dev)))
++ macb_clks_disable(bp->pclk, bp->hclk, bp->tx_clk, bp->rx_clk, bp->tsu_clk);
++ else
++ macb_clks_disable(NULL, NULL, NULL, NULL, bp->tsu_clk);
+
+ return 0;
+ }
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/118-net-macb-unprepare-clocks-in-case-of-failure.patch b/target/linux/at91/patches-5.10/118-net-macb-unprepare-clocks-in-case-of-failure.patch
new file mode 100644
index 0000000000..a1581086bc
--- /dev/null
+++ b/target/linux/at91/patches-5.10/118-net-macb-unprepare-clocks-in-case-of-failure.patch
@@ -0,0 +1,65 @@
+From 9692c07ee8bf8f68b74d553d861d092e33264781 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 9 Dec 2020 15:03:35 +0200
+Subject: [PATCH 118/247] net: macb: unprepare clocks in case of failure
+
+Unprepare clocks in case of any failure in fu540_c000_clk_init().
+
+Fixes: c218ad559020 ("macb: Add support for SiFive FU540-C000")
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/cadence/macb_main.c | 24 ++++++++++++++++++------
+ 1 file changed, 18 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
+index eacf907a365d..c8d66f966a8b 100644
+--- a/drivers/net/ethernet/cadence/macb_main.c
++++ b/drivers/net/ethernet/cadence/macb_main.c
+@@ -4307,8 +4307,10 @@ static int fu540_c000_clk_init(struct platform_device *pdev, struct clk **pclk,
+ return err;
+
+ mgmt = devm_kzalloc(&pdev->dev, sizeof(*mgmt), GFP_KERNEL);
+- if (!mgmt)
+- return -ENOMEM;
++ if (!mgmt) {
++ err = -ENOMEM;
++ goto err_disable_clks;
++ }
+
+ init.name = "sifive-gemgxl-mgmt";
+ init.ops = &fu540_c000_ops;
+@@ -4319,16 +4321,26 @@ static int fu540_c000_clk_init(struct platform_device *pdev, struct clk **pclk,
+ mgmt->hw.init = &init;
+
+ *tx_clk = devm_clk_register(&pdev->dev, &mgmt->hw);
+- if (IS_ERR(*tx_clk))
+- return PTR_ERR(*tx_clk);
++ if (IS_ERR(*tx_clk)) {
++ err = PTR_ERR(*tx_clk);
++ goto err_disable_clks;
++ }
+
+ err = clk_prepare_enable(*tx_clk);
+- if (err)
++ if (err) {
+ dev_err(&pdev->dev, "failed to enable tx_clk (%u)\n", err);
+- else
++ *tx_clk = NULL;
++ goto err_disable_clks;
++ } else {
+ dev_info(&pdev->dev, "Registered clk switch '%s'\n", init.name);
++ }
+
+ return 0;
++
++err_disable_clks:
++ macb_clks_disable(*pclk, *hclk, *tx_clk, *rx_clk, *tsu_clk);
++
++ return err;
+ }
+
+ static int fu540_c000_init(struct platform_device *pdev)
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/119-net-macb-add-support-for-sama7g5-gem-interface.patch b/target/linux/at91/patches-5.10/119-net-macb-add-support-for-sama7g5-gem-interface.patch
new file mode 100644
index 0000000000..773bbbba31
--- /dev/null
+++ b/target/linux/at91/patches-5.10/119-net-macb-add-support-for-sama7g5-gem-interface.patch
@@ -0,0 +1,59 @@
+From 0085cd8576ceeaddeedf973b939b41ba96e3f77c Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 9 Dec 2020 15:03:38 +0200
+Subject: [PATCH 119/247] net: macb: add support for sama7g5 gem interface
+
+Add support for SAMA7G5 gigabit ethernet interface.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/cadence/macb_main.c | 17 +++++++++++++++++
+ 1 file changed, 17 insertions(+)
+
+diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
+index c8d66f966a8b..ebcc46d8aa9d 100644
+--- a/drivers/net/ethernet/cadence/macb_main.c
++++ b/drivers/net/ethernet/cadence/macb_main.c
+@@ -4359,6 +4359,14 @@ static const struct macb_usrio_config macb_default_usrio = {
+ .refclk = MACB_BIT(CLKEN),
+ };
+
++static const struct macb_usrio_config sama7g5_usrio = {
++ .mii = 0,
++ .rmii = 1,
++ .rgmii = 2,
++ .refclk = BIT(2),
++ .hdfctlen = BIT(6),
++};
++
+ static const struct macb_config fu540_c000_config = {
+ .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO |
+ MACB_CAPS_GEM_HAS_PTP,
+@@ -4452,6 +4460,14 @@ static const struct macb_config zynq_config = {
+ .usrio = &macb_default_usrio,
+ };
+
++static const struct macb_config sama7g5_gem_config = {
++ .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_CLK_HW_CHG,
++ .dma_burst_length = 16,
++ .clk_init = macb_clk_init,
++ .init = macb_init,
++ .usrio = &sama7g5_usrio,
++};
++
+ static const struct of_device_id macb_dt_ids[] = {
+ { .compatible = "cdns,at32ap7000-macb" },
+ { .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config },
+@@ -4469,6 +4485,7 @@ static const struct of_device_id macb_dt_ids[] = {
+ { .compatible = "cdns,zynqmp-gem", .data = &zynqmp_config},
+ { .compatible = "cdns,zynq-gem", .data = &zynq_config },
+ { .compatible = "sifive,fu540-c000-gem", .data = &fu540_c000_config },
++ { .compatible = "microchip,sama7g5-gem", .data = &sama7g5_gem_config },
+ { /* sentinel */ }
+ };
+ MODULE_DEVICE_TABLE(of, macb_dt_ids);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/120-net-macb-add-support-for-sama7g5-emac-interface.patch b/target/linux/at91/patches-5.10/120-net-macb-add-support-for-sama7g5-emac-interface.patch
new file mode 100644
index 0000000000..ea29cb0af0
--- /dev/null
+++ b/target/linux/at91/patches-5.10/120-net-macb-add-support-for-sama7g5-emac-interface.patch
@@ -0,0 +1,44 @@
+From a42f90357cfcfcf5cdade4594ad79a1eae633a9f Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 9 Dec 2020 15:03:39 +0200
+Subject: [PATCH 120/247] net: macb: add support for sama7g5 emac interface
+
+Add support for SAMA7G5 10/100Mbps interface.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/cadence/macb_main.c | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
+index ebcc46d8aa9d..4ce302e03735 100644
+--- a/drivers/net/ethernet/cadence/macb_main.c
++++ b/drivers/net/ethernet/cadence/macb_main.c
+@@ -4468,6 +4468,14 @@ static const struct macb_config sama7g5_gem_config = {
+ .usrio = &sama7g5_usrio,
+ };
+
++static const struct macb_config sama7g5_emac_config = {
++ .caps = MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII | MACB_CAPS_USRIO_HAS_CLKEN,
++ .dma_burst_length = 16,
++ .clk_init = macb_clk_init,
++ .init = macb_init,
++ .usrio = &sama7g5_usrio,
++};
++
+ static const struct of_device_id macb_dt_ids[] = {
+ { .compatible = "cdns,at32ap7000-macb" },
+ { .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config },
+@@ -4486,6 +4494,7 @@ static const struct of_device_id macb_dt_ids[] = {
+ { .compatible = "cdns,zynq-gem", .data = &zynq_config },
+ { .compatible = "sifive,fu540-c000-gem", .data = &fu540_c000_config },
+ { .compatible = "microchip,sama7g5-gem", .data = &sama7g5_gem_config },
++ { .compatible = "microchip,sama7g5-emac", .data = &sama7g5_emac_config },
+ { /* sentinel */ }
+ };
+ MODULE_DEVICE_TABLE(of, macb_dt_ids);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/121-ASoC-pcm5102a-Make-codec-selectable.patch b/target/linux/at91/patches-5.10/121-ASoC-pcm5102a-Make-codec-selectable.patch
new file mode 100644
index 0000000000..cf0db825ac
--- /dev/null
+++ b/target/linux/at91/patches-5.10/121-ASoC-pcm5102a-Make-codec-selectable.patch
@@ -0,0 +1,33 @@
+From 5ac0e1f5577b266543756521b1a749003b0f3686 Mon Sep 17 00:00:00 2001
+From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Date: Mon, 12 Oct 2020 17:19:11 +0300
+Subject: [PATCH 121/247] ASoC: pcm5102a: Make codec selectable
+
+The TI PCM5102A codec driver can be used with the generic sound card
+drivers, so it should be selectable. For example, with the addition
+of #sound-dai-cells = <0> property in DT, it can be used with simple/graph
+card drivers.
+
+Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Link: https://lore.kernel.org/r/20201012141911.3150996-1-codrin.ciubotariu@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ sound/soc/codecs/Kconfig | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
+index 34c6dd04b85a..5791b7056af6 100644
+--- a/sound/soc/codecs/Kconfig
++++ b/sound/soc/codecs/Kconfig
+@@ -1003,7 +1003,7 @@ config SND_SOC_PCM3168A_SPI
+ select REGMAP_SPI
+
+ config SND_SOC_PCM5102A
+- tristate
++ tristate "Texas Instruments PCM5102A CODEC"
+
+ config SND_SOC_PCM512x
+ tristate
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/122-ASoC-atmel-i2s-do-not-warn-if-muxclk-is-missing.patch b/target/linux/at91/patches-5.10/122-ASoC-atmel-i2s-do-not-warn-if-muxclk-is-missing.patch
new file mode 100644
index 0000000000..5c168fbc0a
--- /dev/null
+++ b/target/linux/at91/patches-5.10/122-ASoC-atmel-i2s-do-not-warn-if-muxclk-is-missing.patch
@@ -0,0 +1,35 @@
+From f4389949bf422fe04775c17b833100fa0e95ea68 Mon Sep 17 00:00:00 2001
+From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Date: Tue, 3 Nov 2020 12:05:54 +0200
+Subject: [PATCH 122/247] ASoC: atmel-i2s: do not warn if muxclk is missing
+
+Besides the fact that muxclk is optional, muxclk can be set using
+assigned-clocks, removing the need to set it in driver. The warning is
+thus unneeded, so we can transform it in a debug print, eventually to just
+reflect that muxclk was not set by the driver.
+
+Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Link: https://lore.kernel.org/r/20201103100554.1307190-1-codrin.ciubotariu@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ sound/soc/atmel/atmel-i2s.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/sound/soc/atmel/atmel-i2s.c b/sound/soc/atmel/atmel-i2s.c
+index d870f56c44cf..7483c474ccd7 100644
+--- a/sound/soc/atmel/atmel-i2s.c
++++ b/sound/soc/atmel/atmel-i2s.c
+@@ -581,8 +581,8 @@ static int atmel_i2s_sama5d2_mck_init(struct atmel_i2s_dev *dev,
+ err = PTR_ERR(muxclk);
+ if (err == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+- dev_warn(dev->dev,
+- "failed to get the I2S clock control: %d\n", err);
++ dev_dbg(dev->dev,
++ "failed to get the I2S clock control: %d\n", err);
+ return 0;
+ }
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/123-regulator-mcp16502-add-linear_min_sel.patch b/target/linux/at91/patches-5.10/123-regulator-mcp16502-add-linear_min_sel.patch
new file mode 100644
index 0000000000..4e26bde627
--- /dev/null
+++ b/target/linux/at91/patches-5.10/123-regulator-mcp16502-add-linear_min_sel.patch
@@ -0,0 +1,30 @@
+From f5a73f3bb600b96b6149f2115360e1d0d51fbac4 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Fri, 13 Nov 2020 17:21:07 +0200
+Subject: [PATCH 123/247] regulator: mcp16502: add linear_min_sel
+
+Selectors b/w zero and VDD_LOW_SEL are not valid. Use linear_min_sel.
+
+Fixes: 919261c03e7ca ("regulator: mcp16502: add regulator driver for MCP16502")
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605280870-32432-4-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ drivers/regulator/mcp16502.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
+index 6d0ad74935b3..ab78f831f5bf 100644
+--- a/drivers/regulator/mcp16502.c
++++ b/drivers/regulator/mcp16502.c
+@@ -93,6 +93,7 @@ static unsigned int mcp16502_of_map_mode(unsigned int mode)
+ .owner = THIS_MODULE, \
+ .n_voltages = MCP16502_VSEL + 1, \
+ .linear_ranges = _ranges, \
++ .linear_min_sel = VDD_LOW_SEL, \
+ .n_linear_ranges = ARRAY_SIZE(_ranges), \
+ .of_match = of_match_ptr(_name), \
+ .of_map_mode = mcp16502_of_map_mode, \
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/124-regulator-mcp16502-adapt-for-get-set-on-other-regist.patch b/target/linux/at91/patches-5.10/124-regulator-mcp16502-adapt-for-get-set-on-other-regist.patch
new file mode 100644
index 0000000000..5cd433f31a
--- /dev/null
+++ b/target/linux/at91/patches-5.10/124-regulator-mcp16502-adapt-for-get-set-on-other-regist.patch
@@ -0,0 +1,122 @@
+From 5295f4c122258a11fb6012b7e043248e681db5a2 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Fri, 13 Nov 2020 17:21:08 +0200
+Subject: [PATCH 124/247] regulator: mcp16502: adapt for get/set on other
+ registers
+
+MCP16502 have multiple registers for each regulator (as described
+in enum mcp16502_reg). Adapt the code to be able to get/set all these
+registers. This is necessary for the following commits.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605280870-32432-5-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ drivers/regulator/mcp16502.c | 43 ++++++++++++++++++++++--------------
+ 1 file changed, 27 insertions(+), 16 deletions(-)
+
+diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
+index ab78f831f5bf..48eb64bc4018 100644
+--- a/drivers/regulator/mcp16502.c
++++ b/drivers/regulator/mcp16502.c
+@@ -54,13 +54,9 @@
+ * This function is useful for iterating over all regulators and accessing their
+ * registers in a generic way or accessing a regulator device by its id.
+ */
+-#define MCP16502_BASE(i) (((i) + 1) << 4)
++#define MCP16502_REG_BASE(i, r) ((((i) + 1) << 4) + MCP16502_REG_##r)
+ #define MCP16502_STAT_BASE(i) ((i) + 5)
+
+-#define MCP16502_OFFSET_MODE_A 0
+-#define MCP16502_OFFSET_MODE_LPM 1
+-#define MCP16502_OFFSET_MODE_HIB 2
+-
+ #define MCP16502_OPMODE_ACTIVE REGULATOR_MODE_NORMAL
+ #define MCP16502_OPMODE_LPM REGULATOR_MODE_IDLE
+ #define MCP16502_OPMODE_HIB REGULATOR_MODE_STANDBY
+@@ -75,6 +71,23 @@
+ #define MCP16502_MIN_REG 0x0
+ #define MCP16502_MAX_REG 0x65
+
++/**
++ * enum mcp16502_reg - MCP16502 regulators's registers
++ * @MCP16502_REG_A: active state register
++ * @MCP16502_REG_LPM: low power mode state register
++ * @MCP16502_REG_HIB: hibernate state register
++ * @MCP16502_REG_SEQ: startup sequence register
++ * @MCP16502_REG_CFG: configuration register
++ */
++enum mcp16502_reg {
++ MCP16502_REG_A,
++ MCP16502_REG_LPM,
++ MCP16502_REG_HIB,
++ MCP16502_REG_HPM,
++ MCP16502_REG_SEQ,
++ MCP16502_REG_CFG,
++};
++
+ static unsigned int mcp16502_of_map_mode(unsigned int mode)
+ {
+ if (mode == REGULATOR_MODE_NORMAL || mode == REGULATOR_MODE_IDLE)
+@@ -144,22 +157,20 @@ static void mcp16502_gpio_set_mode(struct mcp16502 *mcp, int mode)
+ }
+
+ /*
+- * mcp16502_get_reg() - get the PMIC's configuration register for opmode
++ * mcp16502_get_reg() - get the PMIC's state configuration register for opmode
+ *
+ * @rdev: the regulator whose register we are searching
+ * @opmode: the PMIC's operating mode ACTIVE, Low-power, Hibernate
+ */
+-static int mcp16502_get_reg(struct regulator_dev *rdev, int opmode)
++static int mcp16502_get_state_reg(struct regulator_dev *rdev, int opmode)
+ {
+- int reg = MCP16502_BASE(rdev_get_id(rdev));
+-
+ switch (opmode) {
+ case MCP16502_OPMODE_ACTIVE:
+- return reg + MCP16502_OFFSET_MODE_A;
++ return MCP16502_REG_BASE(rdev_get_id(rdev), A);
+ case MCP16502_OPMODE_LPM:
+- return reg + MCP16502_OFFSET_MODE_LPM;
++ return MCP16502_REG_BASE(rdev_get_id(rdev), LPM);
+ case MCP16502_OPMODE_HIB:
+- return reg + MCP16502_OFFSET_MODE_HIB;
++ return MCP16502_REG_BASE(rdev_get_id(rdev), HIB);
+ default:
+ return -EINVAL;
+ }
+@@ -179,7 +190,7 @@ static unsigned int mcp16502_get_mode(struct regulator_dev *rdev)
+ unsigned int val;
+ int ret, reg;
+
+- reg = mcp16502_get_reg(rdev, MCP16502_OPMODE_ACTIVE);
++ reg = mcp16502_get_state_reg(rdev, MCP16502_OPMODE_ACTIVE);
+ if (reg < 0)
+ return reg;
+
+@@ -210,7 +221,7 @@ static int _mcp16502_set_mode(struct regulator_dev *rdev, unsigned int mode,
+ int val;
+ int reg;
+
+- reg = mcp16502_get_reg(rdev, op_mode);
++ reg = mcp16502_get_state_reg(rdev, op_mode);
+ if (reg < 0)
+ return reg;
+
+@@ -269,10 +280,10 @@ static int mcp16502_suspend_get_target_reg(struct regulator_dev *rdev)
+ {
+ switch (pm_suspend_target_state) {
+ case PM_SUSPEND_STANDBY:
+- return mcp16502_get_reg(rdev, MCP16502_OPMODE_LPM);
++ return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_LPM);
+ case PM_SUSPEND_ON:
+ case PM_SUSPEND_MEM:
+- return mcp16502_get_reg(rdev, MCP16502_OPMODE_HIB);
++ return mcp16502_get_state_reg(rdev, MCP16502_OPMODE_HIB);
+ default:
+ dev_err(&rdev->dev, "invalid suspend target: %d\n",
+ pm_suspend_target_state);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/125-regulator-mcp16502-add-support-for-ramp-delay.patch b/target/linux/at91/patches-5.10/125-regulator-mcp16502-add-support-for-ramp-delay.patch
new file mode 100644
index 0000000000..ef06660803
--- /dev/null
+++ b/target/linux/at91/patches-5.10/125-regulator-mcp16502-add-support-for-ramp-delay.patch
@@ -0,0 +1,146 @@
+From 7f13433e11a3c88f1fd6417c4c5e5a6c98370b9a Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Fri, 13 Nov 2020 17:21:09 +0200
+Subject: [PATCH 125/247] regulator: mcp16502: add support for ramp delay
+
+MCP16502 have configurable ramp delay support (via DVSR bits in
+regulators' CFG register).
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605280870-32432-6-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ drivers/regulator/mcp16502.c | 89 +++++++++++++++++++++++++++++++++++-
+ 1 file changed, 87 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
+index 48eb64bc4018..f81afeeddb19 100644
+--- a/drivers/regulator/mcp16502.c
++++ b/drivers/regulator/mcp16502.c
+@@ -22,8 +22,9 @@
+ #define VDD_LOW_SEL 0x0D
+ #define VDD_HIGH_SEL 0x3F
+
+-#define MCP16502_FLT BIT(7)
+-#define MCP16502_ENS BIT(0)
++#define MCP16502_FLT BIT(7)
++#define MCP16502_DVSR GENMASK(3, 2)
++#define MCP16502_ENS BIT(0)
+
+ /*
+ * The PMIC has four sets of registers corresponding to four power modes:
+@@ -88,6 +89,12 @@ enum mcp16502_reg {
+ MCP16502_REG_CFG,
+ };
+
++/* Ramp delay (uV/us) for buck1, ldo1, ldo2. */
++static const int mcp16502_ramp_b1l12[] = { 6250, 3125, 2083, 1563 };
++
++/* Ramp delay (uV/us) for buck2, buck3, buck4. */
++static const int mcp16502_ramp_b234[] = { 3125, 1563, 1042, 781 };
++
+ static unsigned int mcp16502_of_map_mode(unsigned int mode)
+ {
+ if (mode == REGULATOR_MODE_NORMAL || mode == REGULATOR_MODE_IDLE)
+@@ -271,6 +278,80 @@ static int mcp16502_get_status(struct regulator_dev *rdev)
+ return REGULATOR_STATUS_UNDEFINED;
+ }
+
++static int mcp16502_set_voltage_time_sel(struct regulator_dev *rdev,
++ unsigned int old_sel,
++ unsigned int new_sel)
++{
++ static const u8 us_ramp[] = { 8, 16, 24, 32 };
++ int id = rdev_get_id(rdev);
++ unsigned int uV_delta, val;
++ int ret;
++
++ ret = regmap_read(rdev->regmap, MCP16502_REG_BASE(id, CFG), &val);
++ if (ret)
++ return ret;
++
++ val = (val & MCP16502_DVSR) >> 2;
++ uV_delta = abs(new_sel * rdev->desc->linear_ranges->step -
++ old_sel * rdev->desc->linear_ranges->step);
++ switch (id) {
++ case BUCK1:
++ case LDO1:
++ case LDO2:
++ ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val],
++ mcp16502_ramp_b1l12[val]);
++ break;
++
++ case BUCK2:
++ case BUCK3:
++ case BUCK4:
++ ret = DIV_ROUND_CLOSEST(uV_delta * us_ramp[val],
++ mcp16502_ramp_b234[val]);
++ break;
++
++ default:
++ return -EINVAL;
++ }
++
++ return ret;
++}
++
++static int mcp16502_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
++{
++ const int *ramp;
++ int id = rdev_get_id(rdev);
++ unsigned int i, size;
++
++ switch (id) {
++ case BUCK1:
++ case LDO1:
++ case LDO2:
++ ramp = mcp16502_ramp_b1l12;
++ size = ARRAY_SIZE(mcp16502_ramp_b1l12);
++ break;
++
++ case BUCK2:
++ case BUCK3:
++ case BUCK4:
++ ramp = mcp16502_ramp_b234;
++ size = ARRAY_SIZE(mcp16502_ramp_b234);
++ break;
++
++ default:
++ return -EINVAL;
++ }
++
++ for (i = 0; i < size; i++) {
++ if (ramp[i] == ramp_delay)
++ break;
++ }
++ if (i == size)
++ return -EINVAL;
++
++ return regmap_update_bits(rdev->regmap, MCP16502_REG_BASE(id, CFG),
++ MCP16502_DVSR, (i << 2));
++}
++
+ #ifdef CONFIG_SUSPEND
+ /*
+ * mcp16502_suspend_get_target_reg() - get the reg of the target suspend PMIC
+@@ -365,6 +446,8 @@ static const struct regulator_ops mcp16502_buck_ops = {
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mcp16502_get_status,
++ .set_voltage_time_sel = mcp16502_set_voltage_time_sel,
++ .set_ramp_delay = mcp16502_set_ramp_delay,
+
+ .set_mode = mcp16502_set_mode,
+ .get_mode = mcp16502_get_mode,
+@@ -389,6 +472,8 @@ static const struct regulator_ops mcp16502_ldo_ops = {
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .get_status = mcp16502_get_status,
++ .set_voltage_time_sel = mcp16502_set_voltage_time_sel,
++ .set_ramp_delay = mcp16502_set_ramp_delay,
+
+ #ifdef CONFIG_SUSPEND
+ .set_suspend_voltage = mcp16502_set_suspend_voltage,
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/126-regulator-mcp16502-remove-void-documentation-of-stru.patch b/target/linux/at91/patches-5.10/126-regulator-mcp16502-remove-void-documentation-of-stru.patch
new file mode 100644
index 0000000000..2c1f5d9806
--- /dev/null
+++ b/target/linux/at91/patches-5.10/126-regulator-mcp16502-remove-void-documentation-of-stru.patch
@@ -0,0 +1,32 @@
+From 8dcbcb052f682478dcbfa7fc9abdd909e1deab87 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Fri, 13 Nov 2020 17:21:10 +0200
+Subject: [PATCH 126/247] regulator: mcp16502: remove void documentation of
+ struct mcp16502
+
+struct mcp16502 has no members called rdev or rmap. Remove the
+documentation.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605280870-32432-7-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ drivers/regulator/mcp16502.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
+index f81afeeddb19..74ad92dc664a 100644
+--- a/drivers/regulator/mcp16502.c
++++ b/drivers/regulator/mcp16502.c
+@@ -135,8 +135,6 @@ enum {
+
+ /*
+ * struct mcp16502 - PMIC representation
+- * @rdev: the regulators belonging to this chip
+- * @rmap: regmap to be used for I2C communication
+ * @lpm: LPM GPIO descriptor
+ */
+ struct mcp16502 {
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/127-regulator-core-validate-selector-against-linear_min_.patch b/target/linux/at91/patches-5.10/127-regulator-core-validate-selector-against-linear_min_.patch
new file mode 100644
index 0000000000..88302fda04
--- /dev/null
+++ b/target/linux/at91/patches-5.10/127-regulator-core-validate-selector-against-linear_min_.patch
@@ -0,0 +1,71 @@
+From 3aee4f22ed0a22d3d6d22fc49812c03d876c7637 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Fri, 13 Nov 2020 17:21:05 +0200
+Subject: [PATCH 127/247] regulator: core: validate selector against
+ linear_min_sel
+
+There are regulators who's min selector is not zero. Selectors loops
+(looping b/w zero and regulator::desc::n_voltages) might throw errors
+because invalid selectors are used (lower than
+regulator::desc::linear_min_sel). For this situations validate selectors
+against regulator::desc::linear_min_sel.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605280870-32432-2-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ drivers/regulator/core.c | 9 +++++++--
+ drivers/regulator/helpers.c | 3 ++-
+ 2 files changed, 9 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
+index 043b5f63b94a..dfdd42b9d773 100644
+--- a/drivers/regulator/core.c
++++ b/drivers/regulator/core.c
+@@ -2984,7 +2984,8 @@ static int _regulator_list_voltage(struct regulator_dev *rdev,
+ return rdev->desc->fixed_uV;
+
+ if (ops->list_voltage) {
+- if (selector >= rdev->desc->n_voltages)
++ if (selector >= rdev->desc->n_voltages ||
++ selector < rdev->desc->linear_min_sel)
+ return -EINVAL;
+ if (lock)
+ regulator_lock(rdev);
+@@ -3135,7 +3136,8 @@ int regulator_list_hardware_vsel(struct regulator *regulator,
+ struct regulator_dev *rdev = regulator->rdev;
+ const struct regulator_ops *ops = rdev->desc->ops;
+
+- if (selector >= rdev->desc->n_voltages)
++ if (selector >= rdev->desc->n_voltages ||
++ selector < rdev->desc->linear_min_sel)
+ return -EINVAL;
+ if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
+ return -EOPNOTSUPP;
+@@ -4058,6 +4060,9 @@ int regulator_set_voltage_time(struct regulator *regulator,
+
+ for (i = 0; i < rdev->desc->n_voltages; i++) {
+ /* We only look for exact voltage matches here */
++ if (i < rdev->desc->linear_min_sel)
++ continue;
++
+ voltage = regulator_list_voltage(regulator, i);
+ if (voltage < 0)
+ return -EINVAL;
+diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
+index e4bb09bbd3fa..974f1a63993d 100644
+--- a/drivers/regulator/helpers.c
++++ b/drivers/regulator/helpers.c
+@@ -647,7 +647,8 @@ int regulator_list_voltage_table(struct regulator_dev *rdev,
+ return -EINVAL;
+ }
+
+- if (selector >= rdev->desc->n_voltages)
++ if (selector >= rdev->desc->n_voltages ||
++ selector < rdev->desc->linear_min_sel)
+ return -EINVAL;
+
+ return rdev->desc->volt_table[selector];
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/128-regulator-core-do-not-continue-if-selector-match.patch b/target/linux/at91/patches-5.10/128-regulator-core-do-not-continue-if-selector-match.patch
new file mode 100644
index 0000000000..f3d53bc135
--- /dev/null
+++ b/target/linux/at91/patches-5.10/128-regulator-core-do-not-continue-if-selector-match.patch
@@ -0,0 +1,31 @@
+From 42b56e8bd343f34d5f2a601d8a8a05d8c861c08c Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Fri, 13 Nov 2020 19:56:04 +0200
+Subject: [PATCH 128/247] regulator: core: do not continue if selector match
+
+Do not continue if selector has already been located.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1605290164-11556-1-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ drivers/regulator/core.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
+index dfdd42b9d773..0b7a23cdbcac 100644
+--- a/drivers/regulator/core.c
++++ b/drivers/regulator/core.c
+@@ -4063,6 +4063,9 @@ int regulator_set_voltage_time(struct regulator *regulator,
+ if (i < rdev->desc->linear_min_sel)
+ continue;
+
++ if (old_sel >= 0 && new_sel >= 0)
++ break;
++
+ voltage = regulator_list_voltage(regulator, i);
+ if (voltage < 0)
+ return -EINVAL;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/129-regulator-core-return-zero-for-selectors-lower-than-.patch b/target/linux/at91/patches-5.10/129-regulator-core-return-zero-for-selectors-lower-than-.patch
new file mode 100644
index 0000000000..b44fa547e1
--- /dev/null
+++ b/target/linux/at91/patches-5.10/129-regulator-core-return-zero-for-selectors-lower-than-.patch
@@ -0,0 +1,71 @@
+From 0e933ffc049a0e181b5a6c3af1933976d6959ba9 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 25 Nov 2020 19:25:47 +0200
+Subject: [PATCH 129/247] regulator: core: return zero for selectors lower than
+ linear_min_sel
+
+Selectors lower than linear_min_sel should not be considered invalid.
+Thus return zero in case _regulator_list_voltage(),
+regulator_list_hardware_vsel() or regulator_list_voltage_table()
+receives such selectors as argument.
+
+Fixes: bdcd1177578c ("regulator: core: validate selector against linear_min_sel")
+Reported-by: Jon Hunter <jonathanh@nvidia.com>
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1606325147-606-1-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ drivers/regulator/core.c | 10 ++++++----
+ drivers/regulator/helpers.c | 5 +++--
+ 2 files changed, 9 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
+index 0b7a23cdbcac..65ecf872b4e0 100644
+--- a/drivers/regulator/core.c
++++ b/drivers/regulator/core.c
+@@ -2984,9 +2984,10 @@ static int _regulator_list_voltage(struct regulator_dev *rdev,
+ return rdev->desc->fixed_uV;
+
+ if (ops->list_voltage) {
+- if (selector >= rdev->desc->n_voltages ||
+- selector < rdev->desc->linear_min_sel)
++ if (selector >= rdev->desc->n_voltages)
+ return -EINVAL;
++ if (selector < rdev->desc->linear_min_sel)
++ return 0;
+ if (lock)
+ regulator_lock(rdev);
+ ret = ops->list_voltage(rdev, selector);
+@@ -3136,9 +3137,10 @@ int regulator_list_hardware_vsel(struct regulator *regulator,
+ struct regulator_dev *rdev = regulator->rdev;
+ const struct regulator_ops *ops = rdev->desc->ops;
+
+- if (selector >= rdev->desc->n_voltages ||
+- selector < rdev->desc->linear_min_sel)
++ if (selector >= rdev->desc->n_voltages)
+ return -EINVAL;
++ if (selector < rdev->desc->linear_min_sel)
++ return 0;
+ if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap)
+ return -EOPNOTSUPP;
+
+diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
+index 974f1a63993d..f42b394a0c46 100644
+--- a/drivers/regulator/helpers.c
++++ b/drivers/regulator/helpers.c
+@@ -647,9 +647,10 @@ int regulator_list_voltage_table(struct regulator_dev *rdev,
+ return -EINVAL;
+ }
+
+- if (selector >= rdev->desc->n_voltages ||
+- selector < rdev->desc->linear_min_sel)
++ if (selector >= rdev->desc->n_voltages)
+ return -EINVAL;
++ if (selector < rdev->desc->linear_min_sel)
++ return 0;
+
+ return rdev->desc->volt_table[selector];
+ }
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/130-regulator-mcp16502-lpm-pin-can-be-optional-on-some-p.patch b/target/linux/at91/patches-5.10/130-regulator-mcp16502-lpm-pin-can-be-optional-on-some-p.patch
new file mode 100644
index 0000000000..9323fedaf7
--- /dev/null
+++ b/target/linux/at91/patches-5.10/130-regulator-mcp16502-lpm-pin-can-be-optional-on-some-p.patch
@@ -0,0 +1,35 @@
+From 763fe72f607d4e929d2c710c88e5c6978dd6ad97 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 7 Jan 2021 16:15:26 +0200
+Subject: [PATCH 130/247] regulator: mcp16502: lpm pin can be optional on some
+ platforms
+
+On some platform (e.g. SAMA7G5) LPM pin should be optional as it can
+be controlled explicitly (via shutdown controller registers) in the
+platform specific power saving code to decrease the power consumption
+while suspended as this SoC pin may be connected to other devices that
+could take power saving actions based on its value.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/1610028927-9842-3-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ drivers/regulator/mcp16502.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
+index 74ad92dc664a..88c6bd5b6c78 100644
+--- a/drivers/regulator/mcp16502.c
++++ b/drivers/regulator/mcp16502.c
+@@ -550,7 +550,7 @@ static int mcp16502_probe(struct i2c_client *client,
+ config.regmap = rmap;
+ config.driver_data = mcp;
+
+- mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW);
++ mcp->lpm = devm_gpiod_get_optional(dev, "lpm", GPIOD_OUT_LOW);
+ if (IS_ERR(mcp->lpm)) {
+ dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm));
+ return PTR_ERR(mcp->lpm);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/131-pinctrl-at91-pio4-add-support-for-fewer-lines-on-las.patch b/target/linux/at91/patches-5.10/131-pinctrl-at91-pio4-add-support-for-fewer-lines-on-las.patch
new file mode 100644
index 0000000000..0ca118a24d
--- /dev/null
+++ b/target/linux/at91/patches-5.10/131-pinctrl-at91-pio4-add-support-for-fewer-lines-on-las.patch
@@ -0,0 +1,75 @@
+From 7cb1dad7a7dfe4cfe55ebe86930dd6aef0de66b4 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Fri, 13 Nov 2020 15:24:29 +0200
+Subject: [PATCH 131/247] pinctrl: at91-pio4: add support for fewer lines on
+ last PIO bank
+
+Some products, like sama7g5, do not have a full last bank of PIO lines.
+In this case for example, sama7g5 only has 8 lines for the PE bank.
+PA0-31, PB0-31, PC0-31, PD0-31, PE0-7, in total 136 lines.
+To cope with this situation, added a data attribute that is product dependent,
+to specify the number of lines of the last bank.
+In case this number is different from the macro ATMEL_PIO_NPINS_PER_BANK,
+adjust the total number of lines accordingly.
+This will avoid advertising 160 lines instead of the actual 136, as this
+product supports, and to avoid reading/writing to invalid register addresses.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
+Link: https://lore.kernel.org/r/20201113132429.420940-1-eugen.hristev@microchip.com
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ drivers/pinctrl/pinctrl-at91-pio4.c | 18 ++++++++++++++++--
+ 1 file changed, 16 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
+index 578b387100d9..d267367d94b9 100644
+--- a/drivers/pinctrl/pinctrl-at91-pio4.c
++++ b/drivers/pinctrl/pinctrl-at91-pio4.c
+@@ -71,8 +71,15 @@
+ /* Custom pinconf parameters */
+ #define ATMEL_PIN_CONFIG_DRIVE_STRENGTH (PIN_CONFIG_END + 1)
+
++/**
++ * struct atmel_pioctrl_data - Atmel PIO controller (pinmux + gpio) data struct
++ * @nbanks: number of PIO banks
++ * @last_bank_count: number of lines in the last bank (can be less than
++ * the rest of the banks).
++ */
+ struct atmel_pioctrl_data {
+ unsigned nbanks;
++ unsigned last_bank_count;
+ };
+
+ struct atmel_group {
+@@ -980,11 +987,13 @@ static const struct dev_pm_ops atmel_pctrl_pm_ops = {
+ * We can have up to 16 banks.
+ */
+ static const struct atmel_pioctrl_data atmel_sama5d2_pioctrl_data = {
+- .nbanks = 4,
++ .nbanks = 4,
++ .last_bank_count = ATMEL_PIO_NPINS_PER_BANK,
+ };
+
+ static const struct atmel_pioctrl_data microchip_sama7g5_pioctrl_data = {
+- .nbanks = 5,
++ .nbanks = 5,
++ .last_bank_count = 8, /* sama7g5 has only PE0 to PE7 */
+ };
+
+ static const struct of_device_id atmel_pctrl_of_match[] = {
+@@ -1025,6 +1034,11 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
+ atmel_pioctrl_data = match->data;
+ atmel_pioctrl->nbanks = atmel_pioctrl_data->nbanks;
+ atmel_pioctrl->npins = atmel_pioctrl->nbanks * ATMEL_PIO_NPINS_PER_BANK;
++ /* if last bank has limited number of pins, adjust accordingly */
++ if (atmel_pioctrl_data->last_bank_count != ATMEL_PIO_NPINS_PER_BANK) {
++ atmel_pioctrl->npins -= ATMEL_PIO_NPINS_PER_BANK;
++ atmel_pioctrl->npins += atmel_pioctrl_data->last_bank_count;
++ }
+
+ atmel_pioctrl->reg_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(atmel_pioctrl->reg_base))
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/132-dmaengine-at_xdmac-adapt-perid-for-mem2mem-operation.patch b/target/linux/at91/patches-5.10/132-dmaengine-at_xdmac-adapt-perid-for-mem2mem-operation.patch
new file mode 100644
index 0000000000..27c95082e3
--- /dev/null
+++ b/target/linux/at91/patches-5.10/132-dmaengine-at_xdmac-adapt-perid-for-mem2mem-operation.patch
@@ -0,0 +1,55 @@
+From 1dccaa4c1e99cd8bd27684a2c87ec806d426c088 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Fri, 16 Oct 2020 12:37:25 +0300
+Subject: [PATCH 132/247] dmaengine: at_xdmac: adapt perid for mem2mem
+ operations
+
+The PERID in the CC register for mem2mem operations must match an unused
+PERID.
+The PERID field is 7 bits, but the selected value is 0x3f.
+On later products we can have more reserved PERIDs for actual peripherals,
+thus this needs to be increased to maximum size.
+Changing the value to 0x7f, which is the maximum for 7 bits field.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
+Link: https://lore.kernel.org/r/20201016093725.289880-1-eugen.hristev@microchip.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+---
+ drivers/dma/at_xdmac.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
+index 90afba0b36fe..85fe260ccd07 100644
+--- a/drivers/dma/at_xdmac.c
++++ b/drivers/dma/at_xdmac.c
+@@ -865,7 +865,7 @@ at_xdmac_interleaved_queue_desc(struct dma_chan *chan,
+ * match the one of another channel. If not, it could lead to spurious
+ * flag status.
+ */
+- u32 chan_cc = AT_XDMAC_CC_PERID(0x3f)
++ u32 chan_cc = AT_XDMAC_CC_PERID(0x7f)
+ | AT_XDMAC_CC_DIF(0)
+ | AT_XDMAC_CC_SIF(0)
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+@@ -1047,7 +1047,7 @@ at_xdmac_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+ * match the one of another channel. If not, it could lead to spurious
+ * flag status.
+ */
+- u32 chan_cc = AT_XDMAC_CC_PERID(0x3f)
++ u32 chan_cc = AT_XDMAC_CC_PERID(0x7f)
+ | AT_XDMAC_CC_DAM_INCREMENTED_AM
+ | AT_XDMAC_CC_SAM_INCREMENTED_AM
+ | AT_XDMAC_CC_DIF(0)
+@@ -1153,7 +1153,7 @@ static struct at_xdmac_desc *at_xdmac_memset_create_desc(struct dma_chan *chan,
+ * match the one of another channel. If not, it could lead to spurious
+ * flag status.
+ */
+- u32 chan_cc = AT_XDMAC_CC_PERID(0x3f)
++ u32 chan_cc = AT_XDMAC_CC_PERID(0x7f)
+ | AT_XDMAC_CC_DAM_UBS_AM
+ | AT_XDMAC_CC_SAM_INCREMENTED_AM
+ | AT_XDMAC_CC_DIF(0)
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/133-dmaengine-at_xdmac-add-support-for-sama7g5-based-at_.patch b/target/linux/at91/patches-5.10/133-dmaengine-at_xdmac-add-support-for-sama7g5-based-at_.patch
new file mode 100644
index 0000000000..5ddc90c044
--- /dev/null
+++ b/target/linux/at91/patches-5.10/133-dmaengine-at_xdmac-add-support-for-sama7g5-based-at_.patch
@@ -0,0 +1,285 @@
+From 613af756b93fe005d9db11ea26fd0318f239d5a2 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Fri, 16 Oct 2020 12:38:50 +0300
+Subject: [PATCH 133/247] dmaengine: at_xdmac: add support for sama7g5 based
+ at_xdmac
+
+SAMA7G5 SoC uses a slightly different variant of the AT_XDMAC.
+Added support by a new compatible and a layout struct that copes
+to the specific version considering the compatible string.
+Only the differences in register map are present in the layout struct.
+I reworked the register access for this part that has the differences.
+Also the Source/Destination Interface bits are no longer valid for this
+variant of the XDMAC. Thus, the layout also has a bool for specifying
+whether these bits are required or not.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Link: https://lore.kernel.org/r/20201016093850.290053-1-eugen.hristev@microchip.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+---
+ drivers/dma/at_xdmac.c | 110 +++++++++++++++++++++++++++++++----------
+ 1 file changed, 84 insertions(+), 26 deletions(-)
+
+diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
+index 85fe260ccd07..2b096ea04018 100644
+--- a/drivers/dma/at_xdmac.c
++++ b/drivers/dma/at_xdmac.c
+@@ -38,13 +38,6 @@
+ #define AT_XDMAC_GE 0x1C /* Global Channel Enable Register */
+ #define AT_XDMAC_GD 0x20 /* Global Channel Disable Register */
+ #define AT_XDMAC_GS 0x24 /* Global Channel Status Register */
+-#define AT_XDMAC_GRS 0x28 /* Global Channel Read Suspend Register */
+-#define AT_XDMAC_GWS 0x2C /* Global Write Suspend Register */
+-#define AT_XDMAC_GRWS 0x30 /* Global Channel Read Write Suspend Register */
+-#define AT_XDMAC_GRWR 0x34 /* Global Channel Read Write Resume Register */
+-#define AT_XDMAC_GSWR 0x38 /* Global Channel Software Request Register */
+-#define AT_XDMAC_GSWS 0x3C /* Global channel Software Request Status Register */
+-#define AT_XDMAC_GSWF 0x40 /* Global Channel Software Flush Request Register */
+ #define AT_XDMAC_VERSION 0xFFC /* XDMAC Version Register */
+
+ /* Channel relative registers offsets */
+@@ -151,8 +144,6 @@
+ #define AT_XDMAC_CSUS 0x30 /* Channel Source Microblock Stride */
+ #define AT_XDMAC_CDUS 0x34 /* Channel Destination Microblock Stride */
+
+-#define AT_XDMAC_CHAN_REG_BASE 0x50 /* Channel registers base address */
+-
+ /* Microblock control members */
+ #define AT_XDMAC_MBR_UBC_UBLEN_MAX 0xFFFFFFUL /* Maximum Microblock Length */
+ #define AT_XDMAC_MBR_UBC_NDE (0x1 << 24) /* Next Descriptor Enable */
+@@ -180,6 +171,27 @@ enum atc_status {
+ AT_XDMAC_CHAN_IS_PAUSED,
+ };
+
++struct at_xdmac_layout {
++ /* Global Channel Read Suspend Register */
++ u8 grs;
++ /* Global Write Suspend Register */
++ u8 gws;
++ /* Global Channel Read Write Suspend Register */
++ u8 grws;
++ /* Global Channel Read Write Resume Register */
++ u8 grwr;
++ /* Global Channel Software Request Register */
++ u8 gswr;
++ /* Global channel Software Request Status Register */
++ u8 gsws;
++ /* Global Channel Software Flush Request Register */
++ u8 gswf;
++ /* Channel reg base */
++ u8 chan_cc_reg_base;
++ /* Source/Destination Interface must be specified or not */
++ bool sdif;
++};
++
+ /* ----- Channels ----- */
+ struct at_xdmac_chan {
+ struct dma_chan chan;
+@@ -213,6 +225,7 @@ struct at_xdmac {
+ struct clk *clk;
+ u32 save_gim;
+ struct dma_pool *at_xdmac_desc_pool;
++ const struct at_xdmac_layout *layout;
+ struct at_xdmac_chan chan[];
+ };
+
+@@ -245,9 +258,33 @@ struct at_xdmac_desc {
+ struct list_head xfer_node;
+ } __aligned(sizeof(u64));
+
++static const struct at_xdmac_layout at_xdmac_sama5d4_layout = {
++ .grs = 0x28,
++ .gws = 0x2C,
++ .grws = 0x30,
++ .grwr = 0x34,
++ .gswr = 0x38,
++ .gsws = 0x3C,
++ .gswf = 0x40,
++ .chan_cc_reg_base = 0x50,
++ .sdif = true,
++};
++
++static const struct at_xdmac_layout at_xdmac_sama7g5_layout = {
++ .grs = 0x30,
++ .gws = 0x38,
++ .grws = 0x40,
++ .grwr = 0x44,
++ .gswr = 0x48,
++ .gsws = 0x4C,
++ .gswf = 0x50,
++ .chan_cc_reg_base = 0x60,
++ .sdif = false,
++};
++
+ static inline void __iomem *at_xdmac_chan_reg_base(struct at_xdmac *atxdmac, unsigned int chan_nb)
+ {
+- return atxdmac->regs + (AT_XDMAC_CHAN_REG_BASE + chan_nb * 0x40);
++ return atxdmac->regs + (atxdmac->layout->chan_cc_reg_base + chan_nb * 0x40);
+ }
+
+ #define at_xdmac_read(atxdmac, reg) readl_relaxed((atxdmac)->regs + (reg))
+@@ -343,8 +380,10 @@ static void at_xdmac_start_xfer(struct at_xdmac_chan *atchan,
+ first->active_xfer = true;
+
+ /* Tell xdmac where to get the first descriptor. */
+- reg = AT_XDMAC_CNDA_NDA(first->tx_dma_desc.phys)
+- | AT_XDMAC_CNDA_NDAIF(atchan->memif);
++ reg = AT_XDMAC_CNDA_NDA(first->tx_dma_desc.phys);
++ if (atxdmac->layout->sdif)
++ reg |= AT_XDMAC_CNDA_NDAIF(atchan->memif);
++
+ at_xdmac_chan_write(atchan, AT_XDMAC_CNDA, reg);
+
+ /*
+@@ -539,6 +578,7 @@ static int at_xdmac_compute_chan_conf(struct dma_chan *chan,
+ enum dma_transfer_direction direction)
+ {
+ struct at_xdmac_chan *atchan = to_at_xdmac_chan(chan);
++ struct at_xdmac *atxdmac = to_at_xdmac(atchan->chan.device);
+ int csize, dwidth;
+
+ if (direction == DMA_DEV_TO_MEM) {
+@@ -546,12 +586,14 @@ static int at_xdmac_compute_chan_conf(struct dma_chan *chan,
+ AT91_XDMAC_DT_PERID(atchan->perid)
+ | AT_XDMAC_CC_DAM_INCREMENTED_AM
+ | AT_XDMAC_CC_SAM_FIXED_AM
+- | AT_XDMAC_CC_DIF(atchan->memif)
+- | AT_XDMAC_CC_SIF(atchan->perif)
+ | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
+ | AT_XDMAC_CC_DSYNC_PER2MEM
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_TYPE_PER_TRAN;
++ if (atxdmac->layout->sdif)
++ atchan->cfg |= AT_XDMAC_CC_DIF(atchan->memif) |
++ AT_XDMAC_CC_SIF(atchan->perif);
++
+ csize = ffs(atchan->sconfig.src_maxburst) - 1;
+ if (csize < 0) {
+ dev_err(chan2dev(chan), "invalid src maxburst value\n");
+@@ -569,12 +611,14 @@ static int at_xdmac_compute_chan_conf(struct dma_chan *chan,
+ AT91_XDMAC_DT_PERID(atchan->perid)
+ | AT_XDMAC_CC_DAM_FIXED_AM
+ | AT_XDMAC_CC_SAM_INCREMENTED_AM
+- | AT_XDMAC_CC_DIF(atchan->perif)
+- | AT_XDMAC_CC_SIF(atchan->memif)
+ | AT_XDMAC_CC_SWREQ_HWR_CONNECTED
+ | AT_XDMAC_CC_DSYNC_MEM2PER
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_TYPE_PER_TRAN;
++ if (atxdmac->layout->sdif)
++ atchan->cfg |= AT_XDMAC_CC_DIF(atchan->perif) |
++ AT_XDMAC_CC_SIF(atchan->memif);
++
+ csize = ffs(atchan->sconfig.dst_maxburst) - 1;
+ if (csize < 0) {
+ dev_err(chan2dev(chan), "invalid src maxburst value\n");
+@@ -864,10 +908,12 @@ at_xdmac_interleaved_queue_desc(struct dma_chan *chan,
+ * ERRATA: Even if useless for memory transfers, the PERID has to not
+ * match the one of another channel. If not, it could lead to spurious
+ * flag status.
++ * For SAMA7G5x case, the SIF and DIF fields are no longer used.
++ * Thus, no need to have the SIF/DIF interfaces here.
++ * For SAMA5D4x and SAMA5D2x the SIF and DIF are already configured as
++ * zero.
+ */
+ u32 chan_cc = AT_XDMAC_CC_PERID(0x7f)
+- | AT_XDMAC_CC_DIF(0)
+- | AT_XDMAC_CC_SIF(0)
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_TYPE_MEM_TRAN;
+
+@@ -1046,12 +1092,14 @@ at_xdmac_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+ * ERRATA: Even if useless for memory transfers, the PERID has to not
+ * match the one of another channel. If not, it could lead to spurious
+ * flag status.
++ * For SAMA7G5x case, the SIF and DIF fields are no longer used.
++ * Thus, no need to have the SIF/DIF interfaces here.
++ * For SAMA5D4x and SAMA5D2x the SIF and DIF are already configured as
++ * zero.
+ */
+ u32 chan_cc = AT_XDMAC_CC_PERID(0x7f)
+ | AT_XDMAC_CC_DAM_INCREMENTED_AM
+ | AT_XDMAC_CC_SAM_INCREMENTED_AM
+- | AT_XDMAC_CC_DIF(0)
+- | AT_XDMAC_CC_SIF(0)
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_TYPE_MEM_TRAN;
+ unsigned long irqflags;
+@@ -1152,12 +1200,14 @@ static struct at_xdmac_desc *at_xdmac_memset_create_desc(struct dma_chan *chan,
+ * ERRATA: Even if useless for memory transfers, the PERID has to not
+ * match the one of another channel. If not, it could lead to spurious
+ * flag status.
++ * For SAMA7G5x case, the SIF and DIF fields are no longer used.
++ * Thus, no need to have the SIF/DIF interfaces here.
++ * For SAMA5D4x and SAMA5D2x the SIF and DIF are already configured as
++ * zero.
+ */
+ u32 chan_cc = AT_XDMAC_CC_PERID(0x7f)
+ | AT_XDMAC_CC_DAM_UBS_AM
+ | AT_XDMAC_CC_SAM_INCREMENTED_AM
+- | AT_XDMAC_CC_DIF(0)
+- | AT_XDMAC_CC_SIF(0)
+ | AT_XDMAC_CC_MBSIZE_SIXTEEN
+ | AT_XDMAC_CC_MEMSET_HW_MODE
+ | AT_XDMAC_CC_TYPE_MEM_TRAN;
+@@ -1436,7 +1486,7 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+ mask = AT_XDMAC_CC_TYPE | AT_XDMAC_CC_DSYNC;
+ value = AT_XDMAC_CC_TYPE_PER_TRAN | AT_XDMAC_CC_DSYNC_PER2MEM;
+ if ((desc->lld.mbr_cfg & mask) == value) {
+- at_xdmac_write(atxdmac, AT_XDMAC_GSWF, atchan->mask);
++ at_xdmac_write(atxdmac, atxdmac->layout->gswf, atchan->mask);
+ while (!(at_xdmac_chan_read(atchan, AT_XDMAC_CIS) & AT_XDMAC_CIS_FIS))
+ cpu_relax();
+ }
+@@ -1494,7 +1544,7 @@ at_xdmac_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+ * FIFO flush ensures that data are really written.
+ */
+ if ((desc->lld.mbr_cfg & mask) == value) {
+- at_xdmac_write(atxdmac, AT_XDMAC_GSWF, atchan->mask);
++ at_xdmac_write(atxdmac, atxdmac->layout->gswf, atchan->mask);
+ while (!(at_xdmac_chan_read(atchan, AT_XDMAC_CIS) & AT_XDMAC_CIS_FIS))
+ cpu_relax();
+ }
+@@ -1760,7 +1810,7 @@ static int at_xdmac_device_pause(struct dma_chan *chan)
+ return 0;
+
+ spin_lock_irqsave(&atchan->lock, flags);
+- at_xdmac_write(atxdmac, AT_XDMAC_GRWS, atchan->mask);
++ at_xdmac_write(atxdmac, atxdmac->layout->grws, atchan->mask);
+ while (at_xdmac_chan_read(atchan, AT_XDMAC_CC)
+ & (AT_XDMAC_CC_WRIP | AT_XDMAC_CC_RDIP))
+ cpu_relax();
+@@ -1783,7 +1833,7 @@ static int at_xdmac_device_resume(struct dma_chan *chan)
+ return 0;
+ }
+
+- at_xdmac_write(atxdmac, AT_XDMAC_GRWR, atchan->mask);
++ at_xdmac_write(atxdmac, atxdmac->layout->grwr, atchan->mask);
+ clear_bit(AT_XDMAC_CHAN_IS_PAUSED, &atchan->status);
+ spin_unlock_irqrestore(&atchan->lock, flags);
+
+@@ -1985,6 +2035,10 @@ static int at_xdmac_probe(struct platform_device *pdev)
+ atxdmac->regs = base;
+ atxdmac->irq = irq;
+
++ atxdmac->layout = of_device_get_match_data(&pdev->dev);
++ if (!atxdmac->layout)
++ return -ENODEV;
++
+ atxdmac->clk = devm_clk_get(&pdev->dev, "dma_clk");
+ if (IS_ERR(atxdmac->clk)) {
+ dev_err(&pdev->dev, "can't get dma_clk\n");
+@@ -2127,6 +2181,10 @@ static const struct dev_pm_ops atmel_xdmac_dev_pm_ops = {
+ static const struct of_device_id atmel_xdmac_dt_ids[] = {
+ {
+ .compatible = "atmel,sama5d4-dma",
++ .data = &at_xdmac_sama5d4_layout,
++ }, {
++ .compatible = "microchip,sama7g5-dma",
++ .data = &at_xdmac_sama7g5_layout,
+ }, {
+ /* sentinel */
+ }
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/134-dmaengine-at_xdmac-add-AXI-priority-support-and-reco.patch b/target/linux/at91/patches-5.10/134-dmaengine-at_xdmac-add-AXI-priority-support-and-reco.patch
new file mode 100644
index 0000000000..d519853363
--- /dev/null
+++ b/target/linux/at91/patches-5.10/134-dmaengine-at_xdmac-add-AXI-priority-support-and-reco.patch
@@ -0,0 +1,118 @@
+From 4833d6ea13a6d2c44a91247991a82c3eb6c1613e Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Fri, 16 Oct 2020 12:39:18 +0300
+Subject: [PATCH 134/247] dmaengine: at_xdmac: add AXI priority support and
+ recommended settings
+
+The sama7g5 version of the XDMAC supports priority configuration and
+outstanding capabilities.
+Add defines for the specific registers for this configuration, together
+with recommended settings.
+However the settings are very different if the XDMAC is a mem2mem or a
+per2mem controller.
+Thus, we need to differentiate according to device tree property.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Link: https://lore.kernel.org/r/20201016093918.290137-1-eugen.hristev@microchip.com
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+---
+ drivers/dma/at_xdmac.c | 47 ++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 47 insertions(+)
+
+diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
+index 2b096ea04018..8ca86d09b255 100644
+--- a/drivers/dma/at_xdmac.c
++++ b/drivers/dma/at_xdmac.c
+@@ -30,7 +30,24 @@
+ #define AT_XDMAC_FIFO_SZ(i) (((i) >> 5) & 0x7FF) /* Number of Bytes */
+ #define AT_XDMAC_NB_REQ(i) ((((i) >> 16) & 0x3F) + 1) /* Number of Peripheral Requests Minus One */
+ #define AT_XDMAC_GCFG 0x04 /* Global Configuration Register */
++#define AT_XDMAC_WRHP(i) (((i) & 0xF) << 4)
++#define AT_XDMAC_WRMP(i) (((i) & 0xF) << 8)
++#define AT_XDMAC_WRLP(i) (((i) & 0xF) << 12)
++#define AT_XDMAC_RDHP(i) (((i) & 0xF) << 16)
++#define AT_XDMAC_RDMP(i) (((i) & 0xF) << 20)
++#define AT_XDMAC_RDLP(i) (((i) & 0xF) << 24)
++#define AT_XDMAC_RDSG(i) (((i) & 0xF) << 28)
++#define AT_XDMAC_GCFG_M2M (AT_XDMAC_RDLP(0xF) | AT_XDMAC_WRLP(0xF))
++#define AT_XDMAC_GCFG_P2M (AT_XDMAC_RDSG(0x1) | AT_XDMAC_RDHP(0x3) | \
++ AT_XDMAC_WRHP(0x5))
+ #define AT_XDMAC_GWAC 0x08 /* Global Weighted Arbiter Configuration Register */
++#define AT_XDMAC_PW0(i) (((i) & 0xF) << 0)
++#define AT_XDMAC_PW1(i) (((i) & 0xF) << 4)
++#define AT_XDMAC_PW2(i) (((i) & 0xF) << 8)
++#define AT_XDMAC_PW3(i) (((i) & 0xF) << 12)
++#define AT_XDMAC_GWAC_M2M 0
++#define AT_XDMAC_GWAC_P2M (AT_XDMAC_PW0(0xF) | AT_XDMAC_PW2(0xF))
++
+ #define AT_XDMAC_GIE 0x0C /* Global Interrupt Enable Register */
+ #define AT_XDMAC_GID 0x10 /* Global Interrupt Disable Register */
+ #define AT_XDMAC_GIM 0x14 /* Global Interrupt Mask Register */
+@@ -190,6 +207,8 @@ struct at_xdmac_layout {
+ u8 chan_cc_reg_base;
+ /* Source/Destination Interface must be specified or not */
+ bool sdif;
++ /* AXI queue priority configuration supported */
++ bool axi_config;
+ };
+
+ /* ----- Channels ----- */
+@@ -268,6 +287,7 @@ static const struct at_xdmac_layout at_xdmac_sama5d4_layout = {
+ .gswf = 0x40,
+ .chan_cc_reg_base = 0x50,
+ .sdif = true,
++ .axi_config = false,
+ };
+
+ static const struct at_xdmac_layout at_xdmac_sama7g5_layout = {
+@@ -280,6 +300,7 @@ static const struct at_xdmac_layout at_xdmac_sama7g5_layout = {
+ .gswf = 0x50,
+ .chan_cc_reg_base = 0x60,
+ .sdif = false,
++ .axi_config = true,
+ };
+
+ static inline void __iomem *at_xdmac_chan_reg_base(struct at_xdmac *atxdmac, unsigned int chan_nb)
+@@ -1996,6 +2017,30 @@ static int atmel_xdmac_resume(struct device *dev)
+ }
+ #endif /* CONFIG_PM_SLEEP */
+
++static void at_xdmac_axi_config(struct platform_device *pdev)
++{
++ struct at_xdmac *atxdmac = (struct at_xdmac *)platform_get_drvdata(pdev);
++ bool dev_m2m = false;
++ u32 dma_requests;
++
++ if (!atxdmac->layout->axi_config)
++ return; /* Not supported */
++
++ if (!of_property_read_u32(pdev->dev.of_node, "dma-requests",
++ &dma_requests)) {
++ dev_info(&pdev->dev, "controller in mem2mem mode.\n");
++ dev_m2m = true;
++ }
++
++ if (dev_m2m) {
++ at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_M2M);
++ at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_M2M);
++ } else {
++ at_xdmac_write(atxdmac, AT_XDMAC_GCFG, AT_XDMAC_GCFG_P2M);
++ at_xdmac_write(atxdmac, AT_XDMAC_GWAC, AT_XDMAC_GWAC_P2M);
++ }
++}
++
+ static int at_xdmac_probe(struct platform_device *pdev)
+ {
+ struct at_xdmac *atxdmac;
+@@ -2140,6 +2185,8 @@ static int at_xdmac_probe(struct platform_device *pdev)
+ dev_info(&pdev->dev, "%d channels, mapped at 0x%p\n",
+ nr_channels, atxdmac->regs);
+
++ at_xdmac_axi_config(pdev);
++
+ return 0;
+
+ err_dma_unregister:
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/135-net-macb-Correct-usage-of-MACB_CAPS_CLK_HW_CHG-flag.patch b/target/linux/at91/patches-5.10/135-net-macb-Correct-usage-of-MACB_CAPS_CLK_HW_CHG-flag.patch
new file mode 100644
index 0000000000..2ed825de61
--- /dev/null
+++ b/target/linux/at91/patches-5.10/135-net-macb-Correct-usage-of-MACB_CAPS_CLK_HW_CHG-flag.patch
@@ -0,0 +1,50 @@
+From 982347f757b85ef526afaf243867ddd515475e1b Mon Sep 17 00:00:00 2001
+From: Charles Keepax <ckeepax@opensource.cirrus.com>
+Date: Mon, 4 Jan 2021 10:38:02 +0000
+Subject: [PATCH 135/247] net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
+
+A new flag MACB_CAPS_CLK_HW_CHG was added and all callers of
+macb_set_tx_clk were gated on the presence of this flag.
+
+- if (!clk)
++ if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
+
+However the flag was not added to anything other than the new
+sama7g5_gem, turning that function call into a no op for all other
+systems. This breaks the networking on Zynq.
+
+The commit message adding this states: a new capability so that
+macb_set_tx_clock() to not be called for IPs having this
+capability
+
+This strongly implies that present of the flag was intended to skip
+the function not absence of the flag. Update the if statement to
+this effect, which repairs the existing users.
+
+Fixes: daafa1d33cc9 ("net: macb: add capability to not set the clock rate")
+Suggested-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
+Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Link: https://lore.kernel.org/r/20210104103802.13091-1-ckeepax@opensource.cirrus.com
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/ethernet/cadence/macb_main.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
+index 4ce302e03735..d5bd640d3fa4 100644
+--- a/drivers/net/ethernet/cadence/macb_main.c
++++ b/drivers/net/ethernet/cadence/macb_main.c
+@@ -464,7 +464,7 @@ static void macb_set_tx_clk(struct macb *bp, int speed)
+ {
+ long ferr, rate, rate_rounded;
+
+- if (!bp->tx_clk || !(bp->caps & MACB_CAPS_CLK_HW_CHG))
++ if (!bp->tx_clk || (bp->caps & MACB_CAPS_CLK_HW_CHG))
+ return;
+
+ switch (speed) {
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/136-ARM-at91-sam9x60-SiP-types-added-to-soc-description.patch b/target/linux/at91/patches-5.10/136-ARM-at91-sam9x60-SiP-types-added-to-soc-description.patch
new file mode 100644
index 0000000000..692a1d487b
--- /dev/null
+++ b/target/linux/at91/patches-5.10/136-ARM-at91-sam9x60-SiP-types-added-to-soc-description.patch
@@ -0,0 +1,50 @@
+From a2eda4ef1e3d617cdd669e256e45e969fab62398 Mon Sep 17 00:00:00 2001
+From: Kai Stuhlemmer <kai.stuhlemmer@ebee.de>
+Date: Thu, 8 Oct 2020 14:50:28 +0200
+Subject: [PATCH 136/247] ARM: at91: sam9x60 SiP types added to soc description
+
+Adding SAM9X60 SIP variants to the soc description list.
+
+Signed-off-by: Kai Stuhlemmer <kai.stuhlemmer@ebee.de>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
+Link: https://lore.kernel.org/r/20201008125028.21071-1-nicolas.ferre@microchip.com
+---
+ drivers/soc/atmel/soc.c | 6 ++++++
+ drivers/soc/atmel/soc.h | 3 +++
+ 2 files changed, 9 insertions(+)
+
+diff --git a/drivers/soc/atmel/soc.c b/drivers/soc/atmel/soc.c
+index 5d06ee70a36b..698d21f50516 100644
+--- a/drivers/soc/atmel/soc.c
++++ b/drivers/soc/atmel/soc.c
+@@ -69,6 +69,12 @@ static const struct at91_soc __initconst socs[] = {
+ #endif
+ #ifdef CONFIG_SOC_SAM9X60
+ AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_EXID_MATCH, "sam9x60", "sam9x60"),
++ AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D5M_EXID_MATCH,
++ "sam9x60 64MiB DDR2 SiP", "sam9x60"),
++ AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D1G_EXID_MATCH,
++ "sam9x60 128MiB DDR2 SiP", "sam9x60"),
++ AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D6K_EXID_MATCH,
++ "sam9x60 8MiB SDRAM SiP", "sam9x60"),
+ #endif
+ #ifdef CONFIG_SOC_SAMA5
+ AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH,
+diff --git a/drivers/soc/atmel/soc.h b/drivers/soc/atmel/soc.h
+index ee652e4841a5..5849846a69d6 100644
+--- a/drivers/soc/atmel/soc.h
++++ b/drivers/soc/atmel/soc.h
+@@ -60,6 +60,9 @@ at91_soc_init(const struct at91_soc *socs);
+ #define AT91SAM9CN11_EXID_MATCH 0x00000009
+
+ #define SAM9X60_EXID_MATCH 0x00000000
++#define SAM9X60_D5M_EXID_MATCH 0x00000001
++#define SAM9X60_D1G_EXID_MATCH 0x00000010
++#define SAM9X60_D6K_EXID_MATCH 0x00000011
+
+ #define AT91SAM9XE128_CIDR_MATCH 0x329973a0
+ #define AT91SAM9XE256_CIDR_MATCH 0x329a93a0
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/137-drivers-soc-atmel-use-GENMASK.patch b/target/linux/at91/patches-5.10/137-drivers-soc-atmel-use-GENMASK.patch
new file mode 100644
index 0000000000..d78a7b95be
--- /dev/null
+++ b/target/linux/at91/patches-5.10/137-drivers-soc-atmel-use-GENMASK.patch
@@ -0,0 +1,30 @@
+From 8d858d9c57a0210ca1ce9e5ba76fab8bdb4d7b39 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Fri, 22 Jan 2021 14:21:32 +0200
+Subject: [PATCH 137/247] drivers: soc: atmel: use GENMASK
+
+Use GENMASK() to define CIDR match mask.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/1611318097-8970-3-git-send-email-claudiu.beznea@microchip.com
+---
+ drivers/soc/atmel/soc.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/soc/atmel/soc.c b/drivers/soc/atmel/soc.c
+index 698d21f50516..c3f920ee5c6f 100644
+--- a/drivers/soc/atmel/soc.c
++++ b/drivers/soc/atmel/soc.c
+@@ -27,7 +27,7 @@
+ #define AT91_CHIPID_EXID 0x04
+ #define AT91_CIDR_VERSION(x) ((x) & 0x1f)
+ #define AT91_CIDR_EXT BIT(31)
+-#define AT91_CIDR_MATCH_MASK 0x7fffffe0
++#define AT91_CIDR_MATCH_MASK GENMASK(30, 5)
+
+ static const struct at91_soc __initconst socs[] = {
+ #ifdef CONFIG_SOC_AT91RM9200
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/138-drivers-soc-atmel-fix-__initconst-should-be-placed-a.patch b/target/linux/at91/patches-5.10/138-drivers-soc-atmel-fix-__initconst-should-be-placed-a.patch
new file mode 100644
index 0000000000..c3bf9e7866
--- /dev/null
+++ b/target/linux/at91/patches-5.10/138-drivers-soc-atmel-fix-__initconst-should-be-placed-a.patch
@@ -0,0 +1,31 @@
+From ed871f95827e9b6d4ee9f9eafec4e18b87fb1a56 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Fri, 22 Jan 2021 14:21:33 +0200
+Subject: [PATCH 138/247] drivers: soc: atmel: fix "__initconst should be
+ placed after socs[]" warning
+
+Fix checkpatch.pl warning: "__initconst should be placed after socs[]".
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/1611318097-8970-4-git-send-email-claudiu.beznea@microchip.com
+---
+ drivers/soc/atmel/soc.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/soc/atmel/soc.c b/drivers/soc/atmel/soc.c
+index c3f920ee5c6f..03f3c742716c 100644
+--- a/drivers/soc/atmel/soc.c
++++ b/drivers/soc/atmel/soc.c
+@@ -29,7 +29,7 @@
+ #define AT91_CIDR_EXT BIT(31)
+ #define AT91_CIDR_MATCH_MASK GENMASK(30, 5)
+
+-static const struct at91_soc __initconst socs[] = {
++static const struct at91_soc socs[] __initconst = {
+ #ifdef CONFIG_SOC_AT91RM9200
+ AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
+ #endif
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/139-drivers-soc-atmel-add-per-soc-id-and-version-match-m.patch b/target/linux/at91/patches-5.10/139-drivers-soc-atmel-add-per-soc-id-and-version-match-m.patch
new file mode 100644
index 0000000000..8bd02f89ad
--- /dev/null
+++ b/target/linux/at91/patches-5.10/139-drivers-soc-atmel-add-per-soc-id-and-version-match-m.patch
@@ -0,0 +1,355 @@
+From 8f6f7ef363268f417f1729bb0b234326dd1e8e2a Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Fri, 22 Jan 2021 14:21:35 +0200
+Subject: [PATCH 139/247] drivers: soc: atmel: add per soc id and version match
+ masks
+
+SAMA7G5 has different masks for chip ID and chip version on CIDR
+register compared to previous AT91 SoCs. For this the commit adapts
+the code for SAMA7G5 addition by introducing 2 new members in
+struct at91_soc and fill them properly and also preparing the
+parsing of proper DT binding.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/1611318097-8970-6-git-send-email-claudiu.beznea@microchip.com
+---
+ drivers/soc/atmel/soc.c | 199 +++++++++++++++++++++++++++-------------
+ drivers/soc/atmel/soc.h | 7 +-
+ 2 files changed, 140 insertions(+), 66 deletions(-)
+
+diff --git a/drivers/soc/atmel/soc.c b/drivers/soc/atmel/soc.c
+index 03f3c742716c..f9052f45cb3e 100644
+--- a/drivers/soc/atmel/soc.c
++++ b/drivers/soc/atmel/soc.c
+@@ -25,135 +25,200 @@
+ #define AT91_DBGU_EXID 0x44
+ #define AT91_CHIPID_CIDR 0x00
+ #define AT91_CHIPID_EXID 0x04
+-#define AT91_CIDR_VERSION(x) ((x) & 0x1f)
++#define AT91_CIDR_VERSION(x, m) ((x) & (m))
++#define AT91_CIDR_VERSION_MASK GENMASK(4, 0)
+ #define AT91_CIDR_EXT BIT(31)
+ #define AT91_CIDR_MATCH_MASK GENMASK(30, 5)
+
+ static const struct at91_soc socs[] __initconst = {
+ #ifdef CONFIG_SOC_AT91RM9200
+- AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
++ AT91_SOC(AT91RM9200_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, 0, "at91rm9200 BGA", "at91rm9200"),
+ #endif
+ #ifdef CONFIG_SOC_AT91SAM9
+- AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
+- AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
+- AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
+- AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
+- AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
+- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
++ AT91_SOC(AT91SAM9260_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, 0, "at91sam9260", NULL),
++ AT91_SOC(AT91SAM9261_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, 0, "at91sam9261", NULL),
++ AT91_SOC(AT91SAM9263_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, 0, "at91sam9263", NULL),
++ AT91_SOC(AT91SAM9G20_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, 0, "at91sam9g20", NULL),
++ AT91_SOC(AT91SAM9RL64_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, 0, "at91sam9rl64", NULL),
++ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, AT91SAM9M11_EXID_MATCH,
+ "at91sam9m11", "at91sam9g45"),
+- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
++ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, AT91SAM9M10_EXID_MATCH,
+ "at91sam9m10", "at91sam9g45"),
+- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
++ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, AT91SAM9G46_EXID_MATCH,
+ "at91sam9g46", "at91sam9g45"),
+- AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
++ AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, AT91SAM9G45_EXID_MATCH,
+ "at91sam9g45", "at91sam9g45"),
+- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
++ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, AT91SAM9G15_EXID_MATCH,
+ "at91sam9g15", "at91sam9x5"),
+- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
++ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, AT91SAM9G35_EXID_MATCH,
+ "at91sam9g35", "at91sam9x5"),
+- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
++ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, AT91SAM9X35_EXID_MATCH,
+ "at91sam9x35", "at91sam9x5"),
+- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
++ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, AT91SAM9G25_EXID_MATCH,
+ "at91sam9g25", "at91sam9x5"),
+- AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
++ AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, AT91SAM9X25_EXID_MATCH,
+ "at91sam9x25", "at91sam9x5"),
+- AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
++ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, AT91SAM9CN12_EXID_MATCH,
+ "at91sam9cn12", "at91sam9n12"),
+- AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
++ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, AT91SAM9N12_EXID_MATCH,
+ "at91sam9n12", "at91sam9n12"),
+- AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
++ AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, AT91SAM9CN11_EXID_MATCH,
+ "at91sam9cn11", "at91sam9n12"),
+- AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
+- AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
+- AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
++ AT91_SOC(AT91SAM9XE128_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, 0, "at91sam9xe128", "at91sam9xe128"),
++ AT91_SOC(AT91SAM9XE256_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, 0, "at91sam9xe256", "at91sam9xe256"),
++ AT91_SOC(AT91SAM9XE512_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, 0, "at91sam9xe512", "at91sam9xe512"),
+ #endif
+ #ifdef CONFIG_SOC_SAM9X60
+- AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_EXID_MATCH, "sam9x60", "sam9x60"),
++ AT91_SOC(SAM9X60_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAM9X60_EXID_MATCH,
++ "sam9x60", "sam9x60"),
+ AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D5M_EXID_MATCH,
++ AT91_CIDR_VERSION_MASK, SAM9X60_EXID_MATCH,
+ "sam9x60 64MiB DDR2 SiP", "sam9x60"),
+ AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D1G_EXID_MATCH,
++ AT91_CIDR_VERSION_MASK, SAM9X60_EXID_MATCH,
+ "sam9x60 128MiB DDR2 SiP", "sam9x60"),
+ AT91_SOC(SAM9X60_CIDR_MATCH, SAM9X60_D6K_EXID_MATCH,
++ AT91_CIDR_VERSION_MASK, SAM9X60_EXID_MATCH,
+ "sam9x60 8MiB SDRAM SiP", "sam9x60"),
+ #endif
+ #ifdef CONFIG_SOC_SAMA5
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D21CU_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D21CU_EXID_MATCH,
+ "sama5d21", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D22CU_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D22CU_EXID_MATCH,
+ "sama5d22", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D225C_D1M_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D225C_D1M_EXID_MATCH,
+ "sama5d225c 16MiB SiP", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D23CU_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D23CU_EXID_MATCH,
+ "sama5d23", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CX_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D24CX_EXID_MATCH,
+ "sama5d24", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D24CU_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D24CU_EXID_MATCH,
+ "sama5d24", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D26CU_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D26CU_EXID_MATCH,
+ "sama5d26", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CU_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D27CU_EXID_MATCH,
+ "sama5d27", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27CN_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D27CN_EXID_MATCH,
+ "sama5d27", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_D1G_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D27C_D1G_EXID_MATCH,
+ "sama5d27c 128MiB SiP", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_D5M_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D27C_D5M_EXID_MATCH,
+ "sama5d27c 64MiB SiP", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_LD1G_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D27C_LD1G_EXID_MATCH,
+ "sama5d27c 128MiB LPDDR2 SiP", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D27C_LD2G_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D27C_LD2G_EXID_MATCH,
+ "sama5d27c 256MiB LPDDR2 SiP", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CU_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D28CU_EXID_MATCH,
+ "sama5d28", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28CN_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D28CN_EXID_MATCH,
+ "sama5d28", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28C_D1G_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D28C_D1G_EXID_MATCH,
+ "sama5d28c 128MiB SiP", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28C_LD1G_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D28C_LD1G_EXID_MATCH,
+ "sama5d28c 128MiB LPDDR2 SiP", "sama5d2"),
+- AT91_SOC(SAMA5D2_CIDR_MATCH, SAMA5D28C_LD2G_EXID_MATCH,
++ AT91_SOC(SAMA5D2_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D28C_LD2G_EXID_MATCH,
+ "sama5d28c 256MiB LPDDR2 SiP", "sama5d2"),
+- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
++ AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D31_EXID_MATCH,
+ "sama5d31", "sama5d3"),
+- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
++ AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D33_EXID_MATCH,
+ "sama5d33", "sama5d3"),
+- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
++ AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D34_EXID_MATCH,
+ "sama5d34", "sama5d3"),
+- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
++ AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D35_EXID_MATCH,
+ "sama5d35", "sama5d3"),
+- AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
++ AT91_SOC(SAMA5D3_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D36_EXID_MATCH,
+ "sama5d36", "sama5d3"),
+- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
++ AT91_SOC(SAMA5D4_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D41_EXID_MATCH,
+ "sama5d41", "sama5d4"),
+- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
++ AT91_SOC(SAMA5D4_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D42_EXID_MATCH,
+ "sama5d42", "sama5d4"),
+- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
++ AT91_SOC(SAMA5D4_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D43_EXID_MATCH,
+ "sama5d43", "sama5d4"),
+- AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
++ AT91_SOC(SAMA5D4_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMA5D44_EXID_MATCH,
+ "sama5d44", "sama5d4"),
+ #endif
+ #ifdef CONFIG_SOC_SAMV7
+- AT91_SOC(SAME70Q21_CIDR_MATCH, SAME70Q21_EXID_MATCH,
++ AT91_SOC(SAME70Q21_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAME70Q21_EXID_MATCH,
+ "same70q21", "same7"),
+- AT91_SOC(SAME70Q20_CIDR_MATCH, SAME70Q20_EXID_MATCH,
++ AT91_SOC(SAME70Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAME70Q20_EXID_MATCH,
+ "same70q20", "same7"),
+- AT91_SOC(SAME70Q19_CIDR_MATCH, SAME70Q19_EXID_MATCH,
++ AT91_SOC(SAME70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK
++ AT91_CIDR_VERSION_MASK, SAME70Q19_EXID_MATCH,
+ "same70q19", "same7"),
+- AT91_SOC(SAMS70Q21_CIDR_MATCH, SAMS70Q21_EXID_MATCH,
++ AT91_SOC(SAMS70Q21_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMS70Q21_EXID_MATCH,
+ "sams70q21", "sams7"),
+- AT91_SOC(SAMS70Q20_CIDR_MATCH, SAMS70Q20_EXID_MATCH,
++ AT91_SOC(SAMS70Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMS70Q20_EXID_MATCH,
+ "sams70q20", "sams7"),
+- AT91_SOC(SAMS70Q19_CIDR_MATCH, SAMS70Q19_EXID_MATCH,
++ AT91_SOC(SAMS70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMS70Q19_EXID_MATCH,
+ "sams70q19", "sams7"),
+- AT91_SOC(SAMV71Q21_CIDR_MATCH, SAMV71Q21_EXID_MATCH,
++ AT91_SOC(SAMV71Q21_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMV71Q21_EXID_MATCH,
+ "samv71q21", "samv7"),
+- AT91_SOC(SAMV71Q20_CIDR_MATCH, SAMV71Q20_EXID_MATCH,
++ AT91_SOC(SAMV71Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMV71Q20_EXID_MATCH,
+ "samv71q20", "samv7"),
+- AT91_SOC(SAMV71Q19_CIDR_MATCH, SAMV71Q19_EXID_MATCH,
++ AT91_SOC(SAMV71Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMV71Q19_EXID_MATCH,
+ "samv71q19", "samv7"),
+- AT91_SOC(SAMV70Q20_CIDR_MATCH, SAMV70Q20_EXID_MATCH,
++ AT91_SOC(SAMV70Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMV70Q20_EXID_MATCH,
+ "samv70q20", "samv7"),
+- AT91_SOC(SAMV70Q19_CIDR_MATCH, SAMV70Q19_EXID_MATCH,
++ AT91_SOC(SAMV70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK, SAMV70Q19_EXID_MATCH,
+ "samv70q19", "samv7"),
+ #endif
+ { /* sentinel */ },
+@@ -191,8 +256,12 @@ static int __init at91_get_cidr_exid_from_chipid(u32 *cidr, u32 *exid)
+ {
+ struct device_node *np;
+ void __iomem *regs;
++ static const struct of_device_id chipids[] = {
++ { .compatible = "atmel,sama5d2-chipid" },
++ { },
++ };
+
+- np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-chipid");
++ np = of_find_matching_node(NULL, chipids);
+ if (!np)
+ return -ENODEV;
+
+@@ -235,7 +304,7 @@ struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+ }
+
+ for (soc = socs; soc->name; soc++) {
+- if (soc->cidr_match != (cidr & AT91_CIDR_MATCH_MASK))
++ if (soc->cidr_match != (cidr & soc->cidr_mask))
+ continue;
+
+ if (!(cidr & AT91_CIDR_EXT) || soc->exid_match == exid)
+@@ -254,7 +323,7 @@ struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+ soc_dev_attr->family = soc->family;
+ soc_dev_attr->soc_id = soc->name;
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
+- AT91_CIDR_VERSION(cidr));
++ AT91_CIDR_VERSION(cidr, soc->version_mask));
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->revision);
+@@ -266,7 +335,7 @@ struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
+ if (soc->family)
+ pr_info("Detected SoC family: %s\n", soc->family);
+ pr_info("Detected SoC: %s, revision %X\n", soc->name,
+- AT91_CIDR_VERSION(cidr));
++ AT91_CIDR_VERSION(cidr, soc->version_mask));
+
+ return soc_dev;
+ }
+diff --git a/drivers/soc/atmel/soc.h b/drivers/soc/atmel/soc.h
+index 5849846a69d6..02198a4de22b 100644
+--- a/drivers/soc/atmel/soc.h
++++ b/drivers/soc/atmel/soc.h
+@@ -16,14 +16,19 @@
+
+ struct at91_soc {
+ u32 cidr_match;
++ u32 cidr_mask;
++ u32 version_mask;
+ u32 exid_match;
+ const char *name;
+ const char *family;
+ };
+
+-#define AT91_SOC(__cidr, __exid, __name, __family) \
++#define AT91_SOC(__cidr, __cidr_mask, __version_mask, __exid, \
++ __name, __family) \
+ { \
+ .cidr_match = (__cidr), \
++ .cidr_mask = (__cidr_mask), \
++ .version_mask = (__version_mask), \
+ .exid_match = (__exid), \
+ .name = (__name), \
+ .family = (__family), \
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/140-drivers-soc-atmel-add-support-for-sama7g5.patch b/target/linux/at91/patches-5.10/140-drivers-soc-atmel-add-support-for-sama7g5.patch
new file mode 100644
index 0000000000..82d12b9ffb
--- /dev/null
+++ b/target/linux/at91/patches-5.10/140-drivers-soc-atmel-add-support-for-sama7g5.patch
@@ -0,0 +1,94 @@
+From e20bb57fc51741677a6fcae04e564797fd18921b Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Fri, 22 Jan 2021 14:21:37 +0200
+Subject: [PATCH 140/247] drivers: soc: atmel: add support for sama7g5
+
+Add support for SAMA7G5 SoCs.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/1611318097-8970-8-git-send-email-claudiu.beznea@microchip.com
+---
+ drivers/soc/atmel/soc.c | 18 ++++++++++++++++++
+ drivers/soc/atmel/soc.h | 6 ++++++
+ 2 files changed, 24 insertions(+)
+
+diff --git a/drivers/soc/atmel/soc.c b/drivers/soc/atmel/soc.c
+index f9052f45cb3e..bc8e72fd431a 100644
+--- a/drivers/soc/atmel/soc.c
++++ b/drivers/soc/atmel/soc.c
+@@ -27,8 +27,10 @@
+ #define AT91_CHIPID_EXID 0x04
+ #define AT91_CIDR_VERSION(x, m) ((x) & (m))
+ #define AT91_CIDR_VERSION_MASK GENMASK(4, 0)
++#define AT91_CIDR_VERSION_MASK_SAMA7G5 GENMASK(3, 0)
+ #define AT91_CIDR_EXT BIT(31)
+ #define AT91_CIDR_MATCH_MASK GENMASK(30, 5)
++#define AT91_CIDR_MASK_SAMA7G5 GENMASK(27, 5)
+
+ static const struct at91_soc socs[] __initconst = {
+ #ifdef CONFIG_SOC_AT91RM9200
+@@ -220,6 +222,20 @@ static const struct at91_soc socs[] __initconst = {
+ AT91_SOC(SAMV70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
+ AT91_CIDR_VERSION_MASK, SAMV70Q19_EXID_MATCH,
+ "samv70q19", "samv7"),
++#endif
++#ifdef CONFIG_SOC_SAMA7
++ AT91_SOC(SAMA7G5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK_SAMA7G5, SAMA7G51_EXID_MATCH,
++ "sama7g51", "sama7g5"),
++ AT91_SOC(SAMA7G5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK_SAMA7G5, SAMA7G52_EXID_MATCH,
++ "sama7g52", "sama7g5"),
++ AT91_SOC(SAMA7G5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK_SAMA7G5, SAMA7G53_EXID_MATCH,
++ "sama7g53", "sama7g5"),
++ AT91_SOC(SAMA7G5_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
++ AT91_CIDR_VERSION_MASK_SAMA7G5, SAMA7G54_EXID_MATCH,
++ "sama7g54", "sama7g5"),
+ #endif
+ { /* sentinel */ },
+ };
+@@ -258,6 +274,7 @@ static int __init at91_get_cidr_exid_from_chipid(u32 *cidr, u32 *exid)
+ void __iomem *regs;
+ static const struct of_device_id chipids[] = {
+ { .compatible = "atmel,sama5d2-chipid" },
++ { .compatible = "microchip,sama7g5-chipid" },
+ { },
+ };
+
+@@ -345,6 +362,7 @@ static const struct of_device_id at91_soc_allowed_list[] __initconst = {
+ { .compatible = "atmel,at91sam9", },
+ { .compatible = "atmel,sama5", },
+ { .compatible = "atmel,samv7", },
++ { .compatible = "microchip,sama7g5", },
+ { }
+ };
+
+diff --git a/drivers/soc/atmel/soc.h b/drivers/soc/atmel/soc.h
+index 02198a4de22b..93c212533ff0 100644
+--- a/drivers/soc/atmel/soc.h
++++ b/drivers/soc/atmel/soc.h
+@@ -48,6 +48,7 @@ at91_soc_init(const struct at91_soc *socs);
+ #define AT91SAM9X5_CIDR_MATCH 0x019a05a0
+ #define AT91SAM9N12_CIDR_MATCH 0x019a07a0
+ #define SAM9X60_CIDR_MATCH 0x019b35a0
++#define SAMA7G5_CIDR_MATCH 0x00162100
+
+ #define AT91SAM9M11_EXID_MATCH 0x00000001
+ #define AT91SAM9M10_EXID_MATCH 0x00000002
+@@ -69,6 +70,11 @@ at91_soc_init(const struct at91_soc *socs);
+ #define SAM9X60_D1G_EXID_MATCH 0x00000010
+ #define SAM9X60_D6K_EXID_MATCH 0x00000011
+
++#define SAMA7G51_EXID_MATCH 0x3
++#define SAMA7G52_EXID_MATCH 0x2
++#define SAMA7G53_EXID_MATCH 0x1
++#define SAMA7G54_EXID_MATCH 0x0
++
+ #define AT91SAM9XE128_CIDR_MATCH 0x329973a0
+ #define AT91SAM9XE256_CIDR_MATCH 0x329a93a0
+ #define AT91SAM9XE512_CIDR_MATCH 0x329aa3a0
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/141-drivers-soc-atmel-add-spdx-license-identifier.patch b/target/linux/at91/patches-5.10/141-drivers-soc-atmel-add-spdx-license-identifier.patch
new file mode 100644
index 0000000000..6d55372504
--- /dev/null
+++ b/target/linux/at91/patches-5.10/141-drivers-soc-atmel-add-spdx-license-identifier.patch
@@ -0,0 +1,56 @@
+From acd4816cfa7811b13ca2864645f2de41031ccf4d Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Tue, 26 Jan 2021 11:29:30 +0200
+Subject: [PATCH 141/247] drivers: soc: atmel: add spdx license identifier
+
+Add SPDX-License-Identifier.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+[nicolas.ferre@microhcip.com: remove license boilerplate now it's useless]
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/1611653376-24168-2-git-send-email-claudiu.beznea@microchip.com
+---
+ drivers/soc/atmel/soc.c | 6 +-----
+ drivers/soc/atmel/soc.h | 6 +-----
+ 2 files changed, 2 insertions(+), 10 deletions(-)
+
+diff --git a/drivers/soc/atmel/soc.c b/drivers/soc/atmel/soc.c
+index bc8e72fd431a..a2967846809f 100644
+--- a/drivers/soc/atmel/soc.c
++++ b/drivers/soc/atmel/soc.c
+@@ -1,13 +1,9 @@
++// SPDX-License-Identifier: GPL-2.0-only
+ /*
+ * Copyright (C) 2015 Atmel
+ *
+ * Alexandre Belloni <alexandre.belloni@free-electrons.com
+ * Boris Brezillon <boris.brezillon@free-electrons.com
+- *
+- * This file is licensed under the terms of the GNU General Public
+- * License version 2. This program is licensed "as is" without any
+- * warranty of any kind, whether express or implied.
+- *
+ */
+
+ #define pr_fmt(fmt) "AT91: " fmt
+diff --git a/drivers/soc/atmel/soc.h b/drivers/soc/atmel/soc.h
+index 93c212533ff0..c3eb3c8f0834 100644
+--- a/drivers/soc/atmel/soc.h
++++ b/drivers/soc/atmel/soc.h
+@@ -1,12 +1,8 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
+ /*
+ * Copyright (C) 2015 Atmel
+ *
+ * Boris Brezillon <boris.brezillon@free-electrons.com
+- *
+- * This file is licensed under the terms of the GNU General Public
+- * License version 2. This program is licensed "as is" without any
+- * warranty of any kind, whether express or implied.
+- *
+ */
+
+ #ifndef __AT91_SOC_H
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/142-drivers-soc-atmel-fix-type-for-same7.patch b/target/linux/at91/patches-5.10/142-drivers-soc-atmel-fix-type-for-same7.patch
new file mode 100644
index 0000000000..f25b25cc7f
--- /dev/null
+++ b/target/linux/at91/patches-5.10/142-drivers-soc-atmel-fix-type-for-same7.patch
@@ -0,0 +1,33 @@
+From b105d1dfab46c13070b8bdea1ab28d223a9c1bee Mon Sep 17 00:00:00 2001
+From: Arnd Bergmann <arnd@arndb.de>
+Date: Thu, 4 Feb 2021 16:49:25 +0100
+Subject: [PATCH 142/247] drivers: soc: atmel: fix type for same7
+
+A missing comma caused a build failure:
+
+drivers/soc/atmel/soc.c:196:24: error: too few arguments provided to function-like macro invocation
+
+Fixes: af3a10513cd6 ("drivers: soc: atmel: add per soc id and version match masks")
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+---
+ drivers/soc/atmel/soc.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/soc/atmel/soc.c b/drivers/soc/atmel/soc.c
+index a2967846809f..a490ad7e090f 100644
+--- a/drivers/soc/atmel/soc.c
++++ b/drivers/soc/atmel/soc.c
+@@ -191,7 +191,7 @@ static const struct at91_soc socs[] __initconst = {
+ AT91_SOC(SAME70Q20_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
+ AT91_CIDR_VERSION_MASK, SAME70Q20_EXID_MATCH,
+ "same70q20", "same7"),
+- AT91_SOC(SAME70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK
++ AT91_SOC(SAME70Q19_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
+ AT91_CIDR_VERSION_MASK, SAME70Q19_EXID_MATCH,
+ "same70q19", "same7"),
+ AT91_SOC(SAMS70Q21_CIDR_MATCH, AT91_CIDR_MATCH_MASK,
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/143-clocksource-drivers-timer-microchip-pit64b-Add-clock.patch b/target/linux/at91/patches-5.10/143-clocksource-drivers-timer-microchip-pit64b-Add-clock.patch
new file mode 100644
index 0000000000..045e920526
--- /dev/null
+++ b/target/linux/at91/patches-5.10/143-clocksource-drivers-timer-microchip-pit64b-Add-clock.patch
@@ -0,0 +1,178 @@
+From 5f090a664d62ceeaf9a0f482426e35cab18d65a9 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Tue, 19 Jan 2021 14:59:25 +0200
+Subject: [PATCH 143/247] clocksource/drivers/timer-microchip-pit64b: Add
+ clocksource suspend/resume
+
+Add suspend/resume support for clocksource timer.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
+Link: https://lore.kernel.org/r/1611061165-30180-1-git-send-email-claudiu.beznea@microchip.com
+---
+ drivers/clocksource/timer-microchip-pit64b.c | 86 ++++++++++++++++----
+ 1 file changed, 71 insertions(+), 15 deletions(-)
+
+diff --git a/drivers/clocksource/timer-microchip-pit64b.c b/drivers/clocksource/timer-microchip-pit64b.c
+index 59e11ca8ee73..ab623b25a47b 100644
+--- a/drivers/clocksource/timer-microchip-pit64b.c
++++ b/drivers/clocksource/timer-microchip-pit64b.c
+@@ -71,10 +71,24 @@ struct mchp_pit64b_clkevt {
+ struct clock_event_device clkevt;
+ };
+
+-#define to_mchp_pit64b_timer(x) \
++#define clkevt_to_mchp_pit64b_timer(x) \
+ ((struct mchp_pit64b_timer *)container_of(x,\
+ struct mchp_pit64b_clkevt, clkevt))
+
++/**
++ * mchp_pit64b_clksrc - PIT64B clocksource data structure
++ * @timer: PIT64B timer
++ * @clksrc: clocksource
++ */
++struct mchp_pit64b_clksrc {
++ struct mchp_pit64b_timer timer;
++ struct clocksource clksrc;
++};
++
++#define clksrc_to_mchp_pit64b_timer(x) \
++ ((struct mchp_pit64b_timer *)container_of(x,\
++ struct mchp_pit64b_clksrc, clksrc))
++
+ /* Base address for clocksource timer. */
+ static void __iomem *mchp_pit64b_cs_base;
+ /* Default cycles for clockevent timer. */
+@@ -116,6 +130,36 @@ static inline void mchp_pit64b_reset(struct mchp_pit64b_timer *timer,
+ writel_relaxed(MCHP_PIT64B_CR_START, timer->base + MCHP_PIT64B_CR);
+ }
+
++static void mchp_pit64b_suspend(struct mchp_pit64b_timer *timer)
++{
++ writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
++ if (timer->mode & MCHP_PIT64B_MR_SGCLK)
++ clk_disable_unprepare(timer->gclk);
++ clk_disable_unprepare(timer->pclk);
++}
++
++static void mchp_pit64b_resume(struct mchp_pit64b_timer *timer)
++{
++ clk_prepare_enable(timer->pclk);
++ if (timer->mode & MCHP_PIT64B_MR_SGCLK)
++ clk_prepare_enable(timer->gclk);
++}
++
++static void mchp_pit64b_clksrc_suspend(struct clocksource *cs)
++{
++ struct mchp_pit64b_timer *timer = clksrc_to_mchp_pit64b_timer(cs);
++
++ mchp_pit64b_suspend(timer);
++}
++
++static void mchp_pit64b_clksrc_resume(struct clocksource *cs)
++{
++ struct mchp_pit64b_timer *timer = clksrc_to_mchp_pit64b_timer(cs);
++
++ mchp_pit64b_resume(timer);
++ mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0);
++}
++
+ static u64 mchp_pit64b_clksrc_read(struct clocksource *cs)
+ {
+ return mchp_pit64b_cnt_read(mchp_pit64b_cs_base);
+@@ -128,7 +172,7 @@ static u64 mchp_pit64b_sched_read_clk(void)
+
+ static int mchp_pit64b_clkevt_shutdown(struct clock_event_device *cedev)
+ {
+- struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
++ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
+
+ writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
+
+@@ -137,7 +181,7 @@ static int mchp_pit64b_clkevt_shutdown(struct clock_event_device *cedev)
+
+ static int mchp_pit64b_clkevt_set_periodic(struct clock_event_device *cedev)
+ {
+- struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
++ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
+
+ mchp_pit64b_reset(timer, mchp_pit64b_ce_cycles, MCHP_PIT64B_MR_CONT,
+ MCHP_PIT64B_IER_PERIOD);
+@@ -148,7 +192,7 @@ static int mchp_pit64b_clkevt_set_periodic(struct clock_event_device *cedev)
+ static int mchp_pit64b_clkevt_set_next_event(unsigned long evt,
+ struct clock_event_device *cedev)
+ {
+- struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
++ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
+
+ mchp_pit64b_reset(timer, evt, MCHP_PIT64B_MR_ONE_SHOT,
+ MCHP_PIT64B_IER_PERIOD);
+@@ -158,21 +202,16 @@ static int mchp_pit64b_clkevt_set_next_event(unsigned long evt,
+
+ static void mchp_pit64b_clkevt_suspend(struct clock_event_device *cedev)
+ {
+- struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
++ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
+
+- writel_relaxed(MCHP_PIT64B_CR_SWRST, timer->base + MCHP_PIT64B_CR);
+- if (timer->mode & MCHP_PIT64B_MR_SGCLK)
+- clk_disable_unprepare(timer->gclk);
+- clk_disable_unprepare(timer->pclk);
++ mchp_pit64b_suspend(timer);
+ }
+
+ static void mchp_pit64b_clkevt_resume(struct clock_event_device *cedev)
+ {
+- struct mchp_pit64b_timer *timer = to_mchp_pit64b_timer(cedev);
++ struct mchp_pit64b_timer *timer = clkevt_to_mchp_pit64b_timer(cedev);
+
+- clk_prepare_enable(timer->pclk);
+- if (timer->mode & MCHP_PIT64B_MR_SGCLK)
+- clk_prepare_enable(timer->gclk);
++ mchp_pit64b_resume(timer);
+ }
+
+ static irqreturn_t mchp_pit64b_interrupt(int irq, void *dev_id)
+@@ -296,20 +335,37 @@ static int __init mchp_pit64b_init_mode(struct mchp_pit64b_timer *timer,
+ static int __init mchp_pit64b_init_clksrc(struct mchp_pit64b_timer *timer,
+ u32 clk_rate)
+ {
++ struct mchp_pit64b_clksrc *cs;
+ int ret;
+
++ cs = kzalloc(sizeof(*cs), GFP_KERNEL);
++ if (!cs)
++ return -ENOMEM;
++
+ mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0);
+
+ mchp_pit64b_cs_base = timer->base;
+
+- ret = clocksource_mmio_init(timer->base, MCHP_PIT64B_NAME, clk_rate,
+- 210, 64, mchp_pit64b_clksrc_read);
++ cs->timer.base = timer->base;
++ cs->timer.pclk = timer->pclk;
++ cs->timer.gclk = timer->gclk;
++ cs->timer.mode = timer->mode;
++ cs->clksrc.name = MCHP_PIT64B_NAME;
++ cs->clksrc.mask = CLOCKSOURCE_MASK(64);
++ cs->clksrc.flags = CLOCK_SOURCE_IS_CONTINUOUS;
++ cs->clksrc.rating = 210;
++ cs->clksrc.read = mchp_pit64b_clksrc_read;
++ cs->clksrc.suspend = mchp_pit64b_clksrc_suspend;
++ cs->clksrc.resume = mchp_pit64b_clksrc_resume;
++
++ ret = clocksource_register_hz(&cs->clksrc, clk_rate);
+ if (ret) {
+ pr_debug("clksrc: Failed to register PIT64B clocksource!\n");
+
+ /* Stop timer. */
+ writel_relaxed(MCHP_PIT64B_CR_SWRST,
+ timer->base + MCHP_PIT64B_CR);
++ kfree(cs);
+
+ return ret;
+ }
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/144-ASoC-atmel-pdc-Use-managed-DMA-buffer-allocation.patch b/target/linux/at91/patches-5.10/144-ASoC-atmel-pdc-Use-managed-DMA-buffer-allocation.patch
new file mode 100644
index 0000000000..1cb43ca20c
--- /dev/null
+++ b/target/linux/at91/patches-5.10/144-ASoC-atmel-pdc-Use-managed-DMA-buffer-allocation.patch
@@ -0,0 +1,140 @@
+From 0b20c174a17dcfa805ddac1301a5af7298877ec3 Mon Sep 17 00:00:00 2001
+From: Lars-Peter Clausen <lars@metafoo.de>
+Date: Wed, 6 Jan 2021 14:36:48 +0100
+Subject: [PATCH 144/247] ASoC: atmel-pdc: Use managed DMA buffer allocation
+
+Instead of manually managing its DMA buffers using
+dma_{alloc,free}_coherent() lets the sound core take care of this using
+managed buffers.
+
+On one hand this reduces the amount of boiler plate code, but the main
+motivation for the change is to use the shared code where possible. This
+makes it easier to argue about correctness and that the code does not
+contain subtle bugs like data leakage or similar.
+
+Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
+Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Link: https://lore.kernel.org/r/20210106133650.13509-1-lars@metafoo.de
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ sound/soc/atmel/atmel-pcm-pdc.c | 78 ++-------------------------------
+ 1 file changed, 4 insertions(+), 74 deletions(-)
+
+diff --git a/sound/soc/atmel/atmel-pcm-pdc.c b/sound/soc/atmel/atmel-pcm-pdc.c
+index 704f700013d3..3e7ea2021b46 100644
+--- a/sound/soc/atmel/atmel-pcm-pdc.c
++++ b/sound/soc/atmel/atmel-pcm-pdc.c
+@@ -34,86 +34,21 @@
+ #include "atmel-pcm.h"
+
+
+-static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm,
+- int stream)
+-{
+- struct snd_pcm_substream *substream = pcm->streams[stream].substream;
+- struct snd_dma_buffer *buf = &substream->dma_buffer;
+- size_t size = ATMEL_SSC_DMABUF_SIZE;
+-
+- buf->dev.type = SNDRV_DMA_TYPE_DEV;
+- buf->dev.dev = pcm->card->dev;
+- buf->private_data = NULL;
+- buf->area = dma_alloc_coherent(pcm->card->dev, size,
+- &buf->addr, GFP_KERNEL);
+- pr_debug("atmel-pcm: alloc dma buffer: area=%p, addr=%p, size=%zu\n",
+- (void *)buf->area, (void *)(long)buf->addr, size);
+-
+- if (!buf->area)
+- return -ENOMEM;
+-
+- buf->bytes = size;
+- return 0;
+-}
+-
+-static int atmel_pcm_mmap(struct snd_soc_component *component,
+- struct snd_pcm_substream *substream,
+- struct vm_area_struct *vma)
+-{
+- return remap_pfn_range(vma, vma->vm_start,
+- substream->dma_buffer.addr >> PAGE_SHIFT,
+- vma->vm_end - vma->vm_start, vma->vm_page_prot);
+-}
+-
+ static int atmel_pcm_new(struct snd_soc_component *component,
+ struct snd_soc_pcm_runtime *rtd)
+ {
+ struct snd_card *card = rtd->card->snd_card;
+- struct snd_pcm *pcm = rtd->pcm;
+ int ret;
+
+ ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+
+- if (pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream) {
+- pr_debug("atmel-pcm: allocating PCM playback DMA buffer\n");
+- ret = atmel_pcm_preallocate_dma_buffer(pcm,
+- SNDRV_PCM_STREAM_PLAYBACK);
+- if (ret)
+- goto out;
+- }
++ snd_pcm_set_managed_buffer_all(rtd->pcm, SNDRV_DMA_TYPE_DEV,
++ card->dev, ATMEL_SSC_DMABUF_SIZE,
++ ATMEL_SSC_DMABUF_SIZE);
+
+- if (pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream) {
+- pr_debug("atmel-pcm: allocating PCM capture DMA buffer\n");
+- ret = atmel_pcm_preallocate_dma_buffer(pcm,
+- SNDRV_PCM_STREAM_CAPTURE);
+- if (ret)
+- goto out;
+- }
+- out:
+- return ret;
+-}
+-
+-static void atmel_pcm_free(struct snd_soc_component *component,
+- struct snd_pcm *pcm)
+-{
+- struct snd_pcm_substream *substream;
+- struct snd_dma_buffer *buf;
+- int stream;
+-
+- for (stream = 0; stream < 2; stream++) {
+- substream = pcm->streams[stream].substream;
+- if (!substream)
+- continue;
+-
+- buf = &substream->dma_buffer;
+- if (!buf->area)
+- continue;
+- dma_free_coherent(pcm->card->dev, buf->bytes,
+- buf->area, buf->addr);
+- buf->area = NULL;
+- }
++ return 0;
+ }
+
+ /*--------------------------------------------------------------------------*\
+@@ -210,9 +145,6 @@ static int atmel_pcm_hw_params(struct snd_soc_component *component,
+ /* this may get called several times by oss emulation
+ * with different params */
+
+- snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer);
+- runtime->dma_bytes = params_buffer_bytes(params);
+-
+ prtd->params = snd_soc_dai_get_dma_data(asoc_rtd_to_cpu(rtd, 0), substream);
+ prtd->params->dma_intr_handler = atmel_pcm_dma_irq;
+
+@@ -384,9 +316,7 @@ static const struct snd_soc_component_driver atmel_soc_platform = {
+ .prepare = atmel_pcm_prepare,
+ .trigger = atmel_pcm_trigger,
+ .pointer = atmel_pcm_pointer,
+- .mmap = atmel_pcm_mmap,
+ .pcm_construct = atmel_pcm_new,
+- .pcm_destruct = atmel_pcm_free,
+ };
+
+ int atmel_pcm_pdc_platform_register(struct device *dev)
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/145-power-reset-at91-sama5d2_shdwc-add-support-for-sama7.patch b/target/linux/at91/patches-5.10/145-power-reset-at91-sama5d2_shdwc-add-support-for-sama7.patch
new file mode 100644
index 0000000000..ed8ffac935
--- /dev/null
+++ b/target/linux/at91/patches-5.10/145-power-reset-at91-sama5d2_shdwc-add-support-for-sama7.patch
@@ -0,0 +1,146 @@
+From f39f2312a68ec0843adba08f9c9182ffa5624190 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 16 Dec 2020 14:57:33 +0200
+Subject: [PATCH 145/247] power: reset: at91-sama5d2_shdwc: add support for
+ sama7g5
+
+Add support for SAMA7G5 by adding proper struct reg_config structure
+and since SAMA7G5 is not currently on LPDDR setups the commit also
+avoid the mapping of DDR controller.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
+---
+ drivers/power/reset/at91-sama5d2_shdwc.c | 72 ++++++++++++++++++------
+ 1 file changed, 54 insertions(+), 18 deletions(-)
+
+diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
+index d9cf91e5b06d..125e592af445 100644
+--- a/drivers/power/reset/at91-sama5d2_shdwc.c
++++ b/drivers/power/reset/at91-sama5d2_shdwc.c
+@@ -78,9 +78,15 @@ struct pmc_reg_config {
+ u8 mckr;
+ };
+
++struct ddrc_reg_config {
++ u32 type_offset;
++ u32 type_mask;
++};
++
+ struct reg_config {
+ struct shdwc_reg_config shdwc;
+ struct pmc_reg_config pmc;
++ struct ddrc_reg_config ddrc;
+ };
+
+ struct shdwc {
+@@ -262,6 +268,10 @@ static const struct reg_config sama5d2_reg_config = {
+ .pmc = {
+ .mckr = 0x30,
+ },
++ .ddrc = {
++ .type_offset = AT91_DDRSDRC_MDR,
++ .type_mask = AT91_DDRSDRC_MD
++ },
+ };
+
+ static const struct reg_config sam9x60_reg_config = {
+@@ -275,6 +285,23 @@ static const struct reg_config sam9x60_reg_config = {
+ .pmc = {
+ .mckr = 0x28,
+ },
++ .ddrc = {
++ .type_offset = AT91_DDRSDRC_MDR,
++ .type_mask = AT91_DDRSDRC_MD
++ },
++};
++
++static const struct reg_config sama7g5_reg_config = {
++ .shdwc = {
++ .wkup_pin_input = 0,
++ .mr_rtcwk_shift = 17,
++ .mr_rttwk_shift = 16,
++ .sr_rtcwk_shift = 5,
++ .sr_rttwk_shift = 4,
++ },
++ .pmc = {
++ .mckr = 0x28,
++ },
+ };
+
+ static const struct of_device_id at91_shdwc_of_match[] = {
+@@ -285,6 +312,10 @@ static const struct of_device_id at91_shdwc_of_match[] = {
+ {
+ .compatible = "microchip,sam9x60-shdwc",
+ .data = &sam9x60_reg_config,
++ },
++ {
++ .compatible = "microchip,sama7g5-shdwc",
++ .data = &sama7g5_reg_config,
+ }, {
+ /*sentinel*/
+ }
+@@ -294,6 +325,7 @@ MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
+ static const struct of_device_id at91_pmc_ids[] = {
+ { .compatible = "atmel,sama5d2-pmc" },
+ { .compatible = "microchip,sam9x60-pmc" },
++ { .compatible = "microchip,sama7g5-pmc" },
+ { /* Sentinel. */ }
+ };
+
+@@ -355,30 +387,34 @@ static int __init at91_shdwc_probe(struct platform_device *pdev)
+ goto clk_disable;
+ }
+
+- np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
+- if (!np) {
+- ret = -ENODEV;
+- goto unmap;
+- }
++ if (at91_shdwc->rcfg->ddrc.type_mask) {
++ np = of_find_compatible_node(NULL, NULL,
++ "atmel,sama5d3-ddramc");
++ if (!np) {
++ ret = -ENODEV;
++ goto unmap;
++ }
+
+- at91_shdwc->mpddrc_base = of_iomap(np, 0);
+- of_node_put(np);
++ at91_shdwc->mpddrc_base = of_iomap(np, 0);
++ of_node_put(np);
+
+- if (!at91_shdwc->mpddrc_base) {
+- ret = -ENOMEM;
+- goto unmap;
++ if (!at91_shdwc->mpddrc_base) {
++ ret = -ENOMEM;
++ goto unmap;
++ }
++
++ ddr_type = readl(at91_shdwc->mpddrc_base +
++ at91_shdwc->rcfg->ddrc.type_offset) &
++ at91_shdwc->rcfg->ddrc.type_mask;
++ if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
++ ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
++ iounmap(at91_shdwc->mpddrc_base);
++ at91_shdwc->mpddrc_base = NULL;
++ }
+ }
+
+ pm_power_off = at91_poweroff;
+
+- ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
+- AT91_DDRSDRC_MD;
+- if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
+- ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
+- iounmap(at91_shdwc->mpddrc_base);
+- at91_shdwc->mpddrc_base = NULL;
+- }
+-
+ return 0;
+
+ unmap:
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/146-pinctrl-at91-pio4-add-support-for-slew-rate.patch b/target/linux/at91/patches-5.10/146-pinctrl-at91-pio4-add-support-for-slew-rate.patch
new file mode 100644
index 0000000000..3568760d3c
--- /dev/null
+++ b/target/linux/at91/patches-5.10/146-pinctrl-at91-pio4-add-support-for-slew-rate.patch
@@ -0,0 +1,126 @@
+From bd819c78346012ae0627b1cd4f6ceb1b51162c71 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 27 Jan 2021 13:45:44 +0200
+Subject: [PATCH 146/247] pinctrl: at91-pio4: add support for slew-rate
+
+SAMA7G5 supports slew rate configuration. Adapt the driver for this.
+For output switching frequencies lower than 50MHz the slew rate needs to
+be enabled. Since most of the pins on SAMA7G5 fall into this category
+enabled the slew rate by default.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
+Link: https://lore.kernel.org/r/1611747945-29960-3-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ drivers/pinctrl/pinctrl-at91-pio4.c | 27 +++++++++++++++++++++++++++
+ 1 file changed, 27 insertions(+)
+
+diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
+index d267367d94b9..f202cdb6dc3c 100644
+--- a/drivers/pinctrl/pinctrl-at91-pio4.c
++++ b/drivers/pinctrl/pinctrl-at91-pio4.c
+@@ -36,6 +36,7 @@
+ #define ATMEL_PIO_DIR_MASK BIT(8)
+ #define ATMEL_PIO_PUEN_MASK BIT(9)
+ #define ATMEL_PIO_PDEN_MASK BIT(10)
++#define ATMEL_PIO_SR_MASK BIT(11)
+ #define ATMEL_PIO_IFEN_MASK BIT(12)
+ #define ATMEL_PIO_IFSCEN_MASK BIT(13)
+ #define ATMEL_PIO_OPD_MASK BIT(14)
+@@ -76,10 +77,12 @@
+ * @nbanks: number of PIO banks
+ * @last_bank_count: number of lines in the last bank (can be less than
+ * the rest of the banks).
++ * @slew_rate_support: slew rate support
+ */
+ struct atmel_pioctrl_data {
+ unsigned nbanks;
+ unsigned last_bank_count;
++ unsigned int slew_rate_support;
+ };
+
+ struct atmel_group {
+@@ -117,6 +120,7 @@ struct atmel_pin {
+ * @pm_suspend_backup: backup/restore register values on suspend/resume
+ * @dev: device entry for the Atmel PIO controller.
+ * @node: node of the Atmel PIO controller.
++ * @slew_rate_support: slew rate support
+ */
+ struct atmel_pioctrl {
+ void __iomem *reg_base;
+@@ -138,6 +142,7 @@ struct atmel_pioctrl {
+ } *pm_suspend_backup;
+ struct device *dev;
+ struct device_node *node;
++ unsigned int slew_rate_support;
+ };
+
+ static const char * const atmel_functions[] = {
+@@ -760,6 +765,13 @@ static int atmel_conf_pin_config_group_get(struct pinctrl_dev *pctldev,
+ return -EINVAL;
+ arg = 1;
+ break;
++ case PIN_CONFIG_SLEW_RATE:
++ if (!atmel_pioctrl->slew_rate_support)
++ return -EOPNOTSUPP;
++ if (!(res & ATMEL_PIO_SR_MASK))
++ return -EINVAL;
++ arg = 1;
++ break;
+ case ATMEL_PIN_CONFIG_DRIVE_STRENGTH:
+ if (!(res & ATMEL_PIO_DRVSTR_MASK))
+ return -EINVAL;
+@@ -793,6 +805,10 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
+ dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n",
+ __func__, pin_id, configs[i]);
+
++ /* Keep slew rate enabled by default. */
++ if (atmel_pioctrl->slew_rate_support)
++ conf |= ATMEL_PIO_SR_MASK;
++
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ conf &= (~ATMEL_PIO_PUEN_MASK);
+@@ -850,6 +866,13 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
+ ATMEL_PIO_SODR);
+ }
+ break;
++ case PIN_CONFIG_SLEW_RATE:
++ if (!atmel_pioctrl->slew_rate_support)
++ break;
++ /* And remove it if explicitly requested. */
++ if (arg == 0)
++ conf &= ~ATMEL_PIO_SR_MASK;
++ break;
+ case ATMEL_PIN_CONFIG_DRIVE_STRENGTH:
+ switch (arg) {
+ case ATMEL_PIO_DRVSTR_LO:
+@@ -901,6 +924,8 @@ static void atmel_conf_pin_config_dbg_show(struct pinctrl_dev *pctldev,
+ seq_printf(s, "%s ", "open-drain");
+ if (conf & ATMEL_PIO_SCHMITT_MASK)
+ seq_printf(s, "%s ", "schmitt");
++ if (atmel_pioctrl->slew_rate_support && (conf & ATMEL_PIO_SR_MASK))
++ seq_printf(s, "%s ", "slew-rate");
+ if (conf & ATMEL_PIO_DRVSTR_MASK) {
+ switch ((conf & ATMEL_PIO_DRVSTR_MASK) >> ATMEL_PIO_DRVSTR_OFFSET) {
+ case ATMEL_PIO_DRVSTR_ME:
+@@ -994,6 +1019,7 @@ static const struct atmel_pioctrl_data atmel_sama5d2_pioctrl_data = {
+ static const struct atmel_pioctrl_data microchip_sama7g5_pioctrl_data = {
+ .nbanks = 5,
+ .last_bank_count = 8, /* sama7g5 has only PE0 to PE7 */
++ .slew_rate_support = 1,
+ };
+
+ static const struct of_device_id atmel_pctrl_of_match[] = {
+@@ -1039,6 +1065,7 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
+ atmel_pioctrl->npins -= ATMEL_PIO_NPINS_PER_BANK;
+ atmel_pioctrl->npins += atmel_pioctrl_data->last_bank_count;
+ }
++ atmel_pioctrl->slew_rate_support = atmel_pioctrl_data->slew_rate_support;
+
+ atmel_pioctrl->reg_base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(atmel_pioctrl->reg_base))
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/147-pinctrl-at91-pio4-fix-Prefer-unsigned-int-to-bare-us.patch b/target/linux/at91/patches-5.10/147-pinctrl-at91-pio4-fix-Prefer-unsigned-int-to-bare-us.patch
new file mode 100644
index 0000000000..e3931bce64
--- /dev/null
+++ b/target/linux/at91/patches-5.10/147-pinctrl-at91-pio4-fix-Prefer-unsigned-int-to-bare-us.patch
@@ -0,0 +1,345 @@
+From 99629d1ad7e4e03ac3324d36b703220555b65566 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 27 Jan 2021 13:45:45 +0200
+Subject: [PATCH 147/247] pinctrl: at91-pio4: fix "Prefer 'unsigned int' to
+ bare use of 'unsigned'"
+
+Fix "Prefer 'unsigned int' to bare use of 'unsigned'" checkpatch.pl
+warning.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
+Link: https://lore.kernel.org/r/1611747945-29960-4-git-send-email-claudiu.beznea@microchip.com
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ drivers/pinctrl/pinctrl-at91-pio4.c | 110 ++++++++++++++--------------
+ 1 file changed, 57 insertions(+), 53 deletions(-)
+
+diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
+index f202cdb6dc3c..a5d328808e4c 100644
+--- a/drivers/pinctrl/pinctrl-at91-pio4.c
++++ b/drivers/pinctrl/pinctrl-at91-pio4.c
+@@ -80,8 +80,8 @@
+ * @slew_rate_support: slew rate support
+ */
+ struct atmel_pioctrl_data {
+- unsigned nbanks;
+- unsigned last_bank_count;
++ unsigned int nbanks;
++ unsigned int last_bank_count;
+ unsigned int slew_rate_support;
+ };
+
+@@ -91,11 +91,11 @@ struct atmel_group {
+ };
+
+ struct atmel_pin {
+- unsigned pin_id;
+- unsigned mux;
+- unsigned ioset;
+- unsigned bank;
+- unsigned line;
++ unsigned int pin_id;
++ unsigned int mux;
++ unsigned int ioset;
++ unsigned int bank;
++ unsigned int line;
+ const char *device;
+ };
+
+@@ -125,16 +125,16 @@ struct atmel_pin {
+ struct atmel_pioctrl {
+ void __iomem *reg_base;
+ struct clk *clk;
+- unsigned nbanks;
++ unsigned int nbanks;
+ struct pinctrl_dev *pinctrl_dev;
+ struct atmel_group *groups;
+ const char * const *group_names;
+ struct atmel_pin **pins;
+- unsigned npins;
++ unsigned int npins;
+ struct gpio_chip *gpio_chip;
+ struct irq_domain *irq_domain;
+ int *irqs;
+- unsigned *pm_wakeup_sources;
++ unsigned int *pm_wakeup_sources;
+ struct {
+ u32 imr;
+ u32 odsr;
+@@ -177,11 +177,11 @@ static void atmel_gpio_irq_ack(struct irq_data *d)
+ */
+ }
+
+-static int atmel_gpio_irq_set_type(struct irq_data *d, unsigned type)
++static int atmel_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = irq_data_get_irq_chip_data(d);
+ struct atmel_pin *pin = atmel_pioctrl->pins[d->hwirq];
+- unsigned reg;
++ unsigned int reg;
+
+ atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_MSKR,
+ BIT(pin->line));
+@@ -268,7 +268,7 @@ static struct irq_chip atmel_gpio_irq_chip = {
+ .irq_set_wake = atmel_gpio_irq_set_wake,
+ };
+
+-static int atmel_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
++static int atmel_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
+
+@@ -316,11 +316,12 @@ static void atmel_gpio_irq_handler(struct irq_desc *desc)
+ chained_irq_exit(chip, desc);
+ }
+
+-static int atmel_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
++static int atmel_gpio_direction_input(struct gpio_chip *chip,
++ unsigned int offset)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
+ struct atmel_pin *pin = atmel_pioctrl->pins[offset];
+- unsigned reg;
++ unsigned int reg;
+
+ atmel_gpio_write(atmel_pioctrl, pin->bank, ATMEL_PIO_MSKR,
+ BIT(pin->line));
+@@ -331,11 +332,11 @@ static int atmel_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+ return 0;
+ }
+
+-static int atmel_gpio_get(struct gpio_chip *chip, unsigned offset)
++static int atmel_gpio_get(struct gpio_chip *chip, unsigned int offset)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
+ struct atmel_pin *pin = atmel_pioctrl->pins[offset];
+- unsigned reg;
++ unsigned int reg;
+
+ reg = atmel_gpio_read(atmel_pioctrl, pin->bank, ATMEL_PIO_PDSR);
+
+@@ -369,12 +370,13 @@ static int atmel_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+ return 0;
+ }
+
+-static int atmel_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
++static int atmel_gpio_direction_output(struct gpio_chip *chip,
++ unsigned int offset,
+ int value)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
+ struct atmel_pin *pin = atmel_pioctrl->pins[offset];
+- unsigned reg;
++ unsigned int reg;
+
+ atmel_gpio_write(atmel_pioctrl, pin->bank,
+ value ? ATMEL_PIO_SODR : ATMEL_PIO_CODR,
+@@ -389,7 +391,7 @@ static int atmel_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ return 0;
+ }
+
+-static void atmel_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
++static void atmel_gpio_set(struct gpio_chip *chip, unsigned int offset, int val)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = gpiochip_get_data(chip);
+ struct atmel_pin *pin = atmel_pioctrl->pins[offset];
+@@ -445,11 +447,11 @@ static struct gpio_chip atmel_gpio_chip = {
+
+ /* --- PINCTRL --- */
+ static unsigned int atmel_pin_config_read(struct pinctrl_dev *pctldev,
+- unsigned pin_id)
++ unsigned int pin_id)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
+- unsigned bank = atmel_pioctrl->pins[pin_id]->bank;
+- unsigned line = atmel_pioctrl->pins[pin_id]->line;
++ unsigned int bank = atmel_pioctrl->pins[pin_id]->bank;
++ unsigned int line = atmel_pioctrl->pins[pin_id]->line;
+ void __iomem *addr = atmel_pioctrl->reg_base
+ + bank * ATMEL_PIO_BANK_OFFSET;
+
+@@ -461,11 +463,11 @@ static unsigned int atmel_pin_config_read(struct pinctrl_dev *pctldev,
+ }
+
+ static void atmel_pin_config_write(struct pinctrl_dev *pctldev,
+- unsigned pin_id, u32 conf)
++ unsigned int pin_id, u32 conf)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
+- unsigned bank = atmel_pioctrl->pins[pin_id]->bank;
+- unsigned line = atmel_pioctrl->pins[pin_id]->line;
++ unsigned int bank = atmel_pioctrl->pins[pin_id]->bank;
++ unsigned int line = atmel_pioctrl->pins[pin_id]->line;
+ void __iomem *addr = atmel_pioctrl->reg_base
+ + bank * ATMEL_PIO_BANK_OFFSET;
+
+@@ -483,7 +485,7 @@ static int atmel_pctl_get_groups_count(struct pinctrl_dev *pctldev)
+ }
+
+ static const char *atmel_pctl_get_group_name(struct pinctrl_dev *pctldev,
+- unsigned selector)
++ unsigned int selector)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
+
+@@ -491,19 +493,20 @@ static const char *atmel_pctl_get_group_name(struct pinctrl_dev *pctldev,
+ }
+
+ static int atmel_pctl_get_group_pins(struct pinctrl_dev *pctldev,
+- unsigned selector, const unsigned **pins,
+- unsigned *num_pins)
++ unsigned int selector,
++ const unsigned int **pins,
++ unsigned int *num_pins)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
+
+- *pins = (unsigned *)&atmel_pioctrl->groups[selector].pin;
++ *pins = (unsigned int *)&atmel_pioctrl->groups[selector].pin;
+ *num_pins = 1;
+
+ return 0;
+ }
+
+ static struct atmel_group *
+-atmel_pctl_find_group_by_pin(struct pinctrl_dev *pctldev, unsigned pin)
++atmel_pctl_find_group_by_pin(struct pinctrl_dev *pctldev, unsigned int pin)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
+ int i;
+@@ -524,7 +527,7 @@ static int atmel_pctl_xlate_pinfunc(struct pinctrl_dev *pctldev,
+ const char **func_name)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
+- unsigned pin_id, func_id;
++ unsigned int pin_id, func_id;
+ struct atmel_group *grp;
+
+ pin_id = ATMEL_GET_PIN_NO(pinfunc);
+@@ -554,10 +557,10 @@ static int atmel_pctl_xlate_pinfunc(struct pinctrl_dev *pctldev,
+ static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np,
+ struct pinctrl_map **map,
+- unsigned *reserved_maps,
+- unsigned *num_maps)
++ unsigned int *reserved_maps,
++ unsigned int *num_maps)
+ {
+- unsigned num_pins, num_configs, reserve;
++ unsigned int num_pins, num_configs, reserve;
+ unsigned long *configs;
+ struct property *pins;
+ u32 pinfunc;
+@@ -628,10 +631,10 @@ static int atmel_pctl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
+ static int atmel_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np_config,
+ struct pinctrl_map **map,
+- unsigned *num_maps)
++ unsigned int *num_maps)
+ {
+ struct device_node *np;
+- unsigned reserved_maps;
++ unsigned int reserved_maps;
+ int ret;
+
+ *map = NULL;
+@@ -679,13 +682,13 @@ static int atmel_pmx_get_functions_count(struct pinctrl_dev *pctldev)
+ }
+
+ static const char *atmel_pmx_get_function_name(struct pinctrl_dev *pctldev,
+- unsigned selector)
++ unsigned int selector)
+ {
+ return atmel_functions[selector];
+ }
+
+ static int atmel_pmx_get_function_groups(struct pinctrl_dev *pctldev,
+- unsigned selector,
++ unsigned int selector,
+ const char * const **groups,
+ unsigned * const num_groups)
+ {
+@@ -698,11 +701,11 @@ static int atmel_pmx_get_function_groups(struct pinctrl_dev *pctldev,
+ }
+
+ static int atmel_pmx_set_mux(struct pinctrl_dev *pctldev,
+- unsigned function,
+- unsigned group)
++ unsigned int function,
++ unsigned int group)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
+- unsigned pin;
++ unsigned int pin;
+ u32 conf;
+
+ dev_dbg(pctldev->dev, "enable function %s group %s\n",
+@@ -726,13 +729,13 @@ static const struct pinmux_ops atmel_pmxops = {
+ };
+
+ static int atmel_conf_pin_config_group_get(struct pinctrl_dev *pctldev,
+- unsigned group,
++ unsigned int group,
+ unsigned long *config)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
+- unsigned param = pinconf_to_config_param(*config), arg = 0;
++ unsigned int param = pinconf_to_config_param(*config), arg = 0;
+ struct atmel_group *grp = atmel_pioctrl->groups + group;
+- unsigned pin_id = grp->pin;
++ unsigned int pin_id = grp->pin;
+ u32 res;
+
+ res = atmel_pin_config_read(pctldev, pin_id);
+@@ -786,21 +789,21 @@ static int atmel_conf_pin_config_group_get(struct pinctrl_dev *pctldev,
+ }
+
+ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
+- unsigned group,
++ unsigned int group,
+ unsigned long *configs,
+- unsigned num_configs)
++ unsigned int num_configs)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
+ struct atmel_group *grp = atmel_pioctrl->groups + group;
+- unsigned bank, pin, pin_id = grp->pin;
++ unsigned int bank, pin, pin_id = grp->pin;
+ u32 mask, conf = 0;
+ int i;
+
+ conf = atmel_pin_config_read(pctldev, pin_id);
+
+ for (i = 0; i < num_configs; i++) {
+- unsigned param = pinconf_to_config_param(configs[i]);
+- unsigned arg = pinconf_to_config_argument(configs[i]);
++ unsigned int param = pinconf_to_config_param(configs[i]);
++ unsigned int arg = pinconf_to_config_argument(configs[i]);
+
+ dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n",
+ __func__, pin_id, configs[i]);
+@@ -900,7 +903,8 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
+ }
+
+ static void atmel_conf_pin_config_dbg_show(struct pinctrl_dev *pctldev,
+- struct seq_file *s, unsigned pin_id)
++ struct seq_file *s,
++ unsigned int pin_id)
+ {
+ struct atmel_pioctrl *atmel_pioctrl = pinctrl_dev_get_drvdata(pctldev);
+ u32 conf;
+@@ -1108,8 +1112,8 @@ static int atmel_pinctrl_probe(struct platform_device *pdev)
+ return -ENOMEM;
+ for (i = 0 ; i < atmel_pioctrl->npins; i++) {
+ struct atmel_group *group = atmel_pioctrl->groups + i;
+- unsigned bank = ATMEL_PIO_BANK(i);
+- unsigned line = ATMEL_PIO_LINE(i);
++ unsigned int bank = ATMEL_PIO_BANK(i);
++ unsigned int line = ATMEL_PIO_LINE(i);
+
+ atmel_pioctrl->pins[i] = devm_kzalloc(dev,
+ sizeof(**atmel_pioctrl->pins), GFP_KERNEL);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/148-net-macb-Add-default-usrio-config-to-default-gem-con.patch b/target/linux/at91/patches-5.10/148-net-macb-Add-default-usrio-config-to-default-gem-con.patch
new file mode 100644
index 0000000000..2e149cefc5
--- /dev/null
+++ b/target/linux/at91/patches-5.10/148-net-macb-Add-default-usrio-config-to-default-gem-con.patch
@@ -0,0 +1,63 @@
+From 096f58e564aed56936ef6de42a44c3101e9b8ed1 Mon Sep 17 00:00:00 2001
+From: Atish Patra <atish.patra@wdc.com>
+Date: Wed, 3 Mar 2021 11:55:49 -0800
+Subject: [PATCH 148/247] net: macb: Add default usrio config to default gem
+ config
+
+There is no usrio config defined for default gem config leading to
+a kernel panic devices that don't define a data. This issue can be
+reprdouced with microchip polar fire soc where compatible string
+is defined as "cdns,macb".
+
+Fixes: edac63861db7 ("add userio bits as platform configuration")
+
+Signed-off-by: Atish Patra <atish.patra@wdc.com>
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/ethernet/cadence/macb_main.c | 15 ++++++++-------
+ 1 file changed, 8 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
+index d5bd640d3fa4..a8d266d72779 100644
+--- a/drivers/net/ethernet/cadence/macb_main.c
++++ b/drivers/net/ethernet/cadence/macb_main.c
+@@ -3837,6 +3837,13 @@ static int macb_init(struct platform_device *pdev)
+ return 0;
+ }
+
++static const struct macb_usrio_config macb_default_usrio = {
++ .mii = MACB_BIT(MII),
++ .rmii = MACB_BIT(RMII),
++ .rgmii = GEM_BIT(RGMII),
++ .refclk = MACB_BIT(CLKEN),
++};
++
+ #if defined(CONFIG_OF)
+ /* 1518 rounded up */
+ #define AT91ETHER_MAX_RBUFF_SZ 0x600
+@@ -4352,13 +4359,6 @@ static int fu540_c000_init(struct platform_device *pdev)
+ return macb_init(pdev);
+ }
+
+-static const struct macb_usrio_config macb_default_usrio = {
+- .mii = MACB_BIT(MII),
+- .rmii = MACB_BIT(RMII),
+- .rgmii = GEM_BIT(RGMII),
+- .refclk = MACB_BIT(CLKEN),
+-};
+-
+ static const struct macb_usrio_config sama7g5_usrio = {
+ .mii = 0,
+ .rmii = 1,
+@@ -4507,6 +4507,7 @@ static const struct macb_config default_gem_config = {
+ .dma_burst_length = 16,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
++ .usrio = &macb_default_usrio,
+ .jumbo_max_len = 10240,
+ };
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/149-ARM-at91-pm-Move-prototypes-to-mutually-included-hea.patch b/target/linux/at91/patches-5.10/149-ARM-at91-pm-Move-prototypes-to-mutually-included-hea.patch
new file mode 100644
index 0000000000..892e8be295
--- /dev/null
+++ b/target/linux/at91/patches-5.10/149-ARM-at91-pm-Move-prototypes-to-mutually-included-hea.patch
@@ -0,0 +1,118 @@
+From 746aba88c64e409cbc3757a5f81fad5b5c74bbcc Mon Sep 17 00:00:00 2001
+From: Lee Jones <lee.jones@linaro.org>
+Date: Wed, 3 Mar 2021 12:41:49 +0000
+Subject: [PATCH 149/247] ARM: at91: pm: Move prototypes to mutually included
+ header
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Both the caller and the supplier's source file should have access to
+the include file containing the prototypes.
+
+Fixes the following W=1 kernel build warning(s):
+
+ drivers/pinctrl/pinctrl-at91.c:1637:6: warning: no previous prototype for ‘at91_pinctrl_gpio_suspend’ [-Wmissing-prototypes]
+ 1637 | void at91_pinctrl_gpio_suspend(void)
+ | ^~~~~~~~~~~~~~~~~~~~~~~~~
+ drivers/pinctrl/pinctrl-at91.c:1661:6: warning: no previous prototype for ‘at91_pinctrl_gpio_resume’ [-Wmissing-prototypes]
+ 1661 | void at91_pinctrl_gpio_resume(void)
+ | ^~~~~~~~~~~~~~~~~~~~~~~~
+
+Cc: Russell King <linux@armlinux.org.uk>
+Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
+Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
+Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
+Signed-off-by: Lee Jones <lee.jones@linaro.org>
+Acked-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
+Link: https://lore.kernel.org/r/20210303124149.3149511-1-lee.jones@linaro.org
+---
+ arch/arm/mach-at91/pm.c | 19 ++++++++-----------
+ drivers/pinctrl/pinctrl-at91.c | 2 ++
+ include/soc/at91/pm.h | 16 ++++++++++++++++
+ 3 files changed, 26 insertions(+), 11 deletions(-)
+ create mode 100644 include/soc/at91/pm.h
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index 3f015cb6ec2b..2dee383f9050 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -17,6 +17,8 @@
+ #include <linux/clk/at91_pmc.h>
+ #include <linux/platform_data/atmel.h>
+
++#include <soc/at91/pm.h>
++
+ #include <asm/cacheflush.h>
+ #include <asm/fncpy.h>
+ #include <asm/system_misc.h>
+@@ -25,17 +27,6 @@
+ #include "generic.h"
+ #include "pm.h"
+
+-/*
+- * FIXME: this is needed to communicate between the pinctrl driver and
+- * the PM implementation in the machine. Possibly part of the PM
+- * implementation should be moved down into the pinctrl driver and get
+- * called as part of the generic suspend/resume path.
+- */
+-#ifdef CONFIG_PINCTRL_AT91
+-extern void at91_pinctrl_gpio_suspend(void);
+-extern void at91_pinctrl_gpio_resume(void);
+-#endif
+-
+ struct at91_soc_pm {
+ int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
+ int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
+@@ -326,6 +317,12 @@ static void at91_pm_suspend(suspend_state_t state)
+ static int at91_pm_enter(suspend_state_t state)
+ {
+ #ifdef CONFIG_PINCTRL_AT91
++ /*
++ * FIXME: this is needed to communicate between the pinctrl driver and
++ * the PM implementation in the machine. Possibly part of the PM
++ * implementation should be moved down into the pinctrl driver and get
++ * called as part of the generic suspend/resume path.
++ */
+ at91_pinctrl_gpio_suspend();
+ #endif
+
+diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
+index 9015486e38c1..dcbb71fa1b2b 100644
+--- a/drivers/pinctrl/pinctrl-at91.c
++++ b/drivers/pinctrl/pinctrl-at91.c
+@@ -23,6 +23,8 @@
+ /* Since we request GPIOs from ourself */
+ #include <linux/pinctrl/consumer.h>
+
++#include <soc/at91/pm.h>
++
+ #include "pinctrl-at91.h"
+ #include "core.h"
+
+diff --git a/include/soc/at91/pm.h b/include/soc/at91/pm.h
+new file mode 100644
+index 000000000000..7a41e53a3ffa
+--- /dev/null
++++ b/include/soc/at91/pm.h
+@@ -0,0 +1,16 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++/*
++ * Atmel Power Management
++ *
++ * Copyright (C) 2020 Atmel
++ *
++ * Author: Lee Jones <lee.jones@linaro.org>
++ */
++
++#ifndef __SOC_ATMEL_PM_H
++#define __SOC_ATMEL_PM_H
++
++void at91_pinctrl_gpio_suspend(void);
++void at91_pinctrl_gpio_resume(void);
++
++#endif /* __SOC_ATMEL_PM_H */
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/150-ASoC-mchp-i2s-mcc-Add-compatible-for-SAMA7G5.patch b/target/linux/at91/patches-5.10/150-ASoC-mchp-i2s-mcc-Add-compatible-for-SAMA7G5.patch
new file mode 100644
index 0000000000..6749c3748b
--- /dev/null
+++ b/target/linux/at91/patches-5.10/150-ASoC-mchp-i2s-mcc-Add-compatible-for-SAMA7G5.patch
@@ -0,0 +1,53 @@
+From d6493e6f1c42f7ad350ea25e11f0e71fc32e6116 Mon Sep 17 00:00:00 2001
+From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Date: Mon, 1 Mar 2021 19:09:00 +0200
+Subject: [PATCH 150/247] ASoC: mchp-i2s-mcc: Add compatible for SAMA7G5
+
+Microchip's new SAMA7G5 includes an updated I2S-MCC compatible with the
+previous version found on SAM9X60. The new controller includes 8 (4 * 2)
+input and output data pins for up to 8 channels for I2S and Left-Justified
+formats.
+
+Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Link: https://lore.kernel.org/r/20210301170905.835091-3-codrin.ciubotariu@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ sound/soc/atmel/Kconfig | 3 +++
+ sound/soc/atmel/mchp-i2s-mcc.c | 3 +++
+ 2 files changed, 6 insertions(+)
+
+diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
+index 89210048e6c2..802962935df0 100644
+--- a/sound/soc/atmel/Kconfig
++++ b/sound/soc/atmel/Kconfig
+@@ -126,10 +126,13 @@ config SND_MCHP_SOC_I2S_MCC
+ Say Y or M if you want to add support for I2S Multi-Channel ASoC
+ driver on the following Microchip platforms:
+ - sam9x60
++ - sama7g5
+
+ The I2SMCC complies with the Inter-IC Sound (I2S) bus specification
+ and supports a Time Division Multiplexed (TDM) interface with
+ external multi-channel audio codecs.
++ Starting with sama7g5, I2S and Left-Justified multi-channel is
++ supported by using multiple data pins, output and input, without TDM.
+
+ config SND_MCHP_SOC_SPDIFTX
+ tristate "Microchip ASoC driver for boards using S/PDIF TX"
+diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c
+index 04acc18f2d72..6a754cef9607 100644
+--- a/sound/soc/atmel/mchp-i2s-mcc.c
++++ b/sound/soc/atmel/mchp-i2s-mcc.c
+@@ -873,6 +873,9 @@ static const struct of_device_id mchp_i2s_mcc_dt_ids[] = {
+ {
+ .compatible = "microchip,sam9x60-i2smcc",
+ },
++ {
++ .compatible = "microchip,sama7g5-i2smcc",
++ },
+ { /* sentinel */ }
+ };
+ MODULE_DEVICE_TABLE(of, mchp_i2s_mcc_dt_ids);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/151-ASoC-mchp-i2s-mcc-Add-multi-channel-support-for-I2S-.patch b/target/linux/at91/patches-5.10/151-ASoC-mchp-i2s-mcc-Add-multi-channel-support-for-I2S-.patch
new file mode 100644
index 0000000000..a1260511f4
--- /dev/null
+++ b/target/linux/at91/patches-5.10/151-ASoC-mchp-i2s-mcc-Add-multi-channel-support-for-I2S-.patch
@@ -0,0 +1,118 @@
+From 5bef4e8125d09443b5486971d5550ed285cde4b1 Mon Sep 17 00:00:00 2001
+From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Date: Mon, 1 Mar 2021 19:09:01 +0200
+Subject: [PATCH 151/247] ASoC: mchp-i2s-mcc: Add multi-channel support for I2S
+ and LEFT_J formats
+
+The latest I2S-MCC available in SAMA7G5 supports multi-channel for I2S and
+Left-Justified formats. For this, the new version uses 8 (4 * 2) input and
+output pins, with each pin being responsible for 2 channels. This sums up
+to a total of 8 channels for synchronous capture and playback.
+
+Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Link: https://lore.kernel.org/r/20210301170905.835091-4-codrin.ciubotariu@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ sound/soc/atmel/mchp-i2s-mcc.c | 38 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+
+diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c
+index 6a754cef9607..dca4fd1e2dfd 100644
+--- a/sound/soc/atmel/mchp-i2s-mcc.c
++++ b/sound/soc/atmel/mchp-i2s-mcc.c
+@@ -16,6 +16,7 @@
+ #include <linux/clk.h>
+ #include <linux/mfd/syscon.h>
+ #include <linux/lcm.h>
++#include <linux/of_device.h>
+
+ #include <sound/core.h>
+ #include <sound/pcm.h>
+@@ -225,6 +226,10 @@ static const struct regmap_config mchp_i2s_mcc_regmap_config = {
+ .max_register = MCHP_I2SMCC_VERSION,
+ };
+
++struct mchp_i2s_mcc_soc_data {
++ unsigned int data_pin_pair_num;
++};
++
+ struct mchp_i2s_mcc_dev {
+ struct wait_queue_head wq_txrdy;
+ struct wait_queue_head wq_rxrdy;
+@@ -232,6 +237,7 @@ struct mchp_i2s_mcc_dev {
+ struct regmap *regmap;
+ struct clk *pclk;
+ struct clk *gclk;
++ const struct mchp_i2s_mcc_soc_data *soc;
+ struct snd_dmaengine_dai_dma_data playback;
+ struct snd_dmaengine_dai_dma_data capture;
+ unsigned int fmt;
+@@ -549,6 +555,17 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream,
+ }
+
+ if (dev->fmt & (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_LEFT_J)) {
++ /* for I2S and LEFT_J one pin is needed for every 2 channels */
++ if (channels > dev->soc->data_pin_pair_num * 2) {
++ dev_err(dev->dev,
++ "unsupported number of audio channels: %d\n",
++ channels);
++ return -EINVAL;
++ }
++
++ /* enable for interleaved format */
++ mrb |= MCHP_I2SMCC_MRB_CRAMODE_REGULAR;
++
+ switch (channels) {
+ case 1:
+ if (is_playback)
+@@ -558,6 +575,12 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream,
+ break;
+ case 2:
+ break;
++ case 4:
++ mra |= MCHP_I2SMCC_MRA_WIRECFG_I2S_2_TDM_1;
++ break;
++ case 8:
++ mra |= MCHP_I2SMCC_MRA_WIRECFG_I2S_4_TDM_2;
++ break;
+ default:
+ dev_err(dev->dev, "unsupported number of audio channels\n");
+ return -EINVAL;
+@@ -869,12 +892,22 @@ static const struct snd_soc_component_driver mchp_i2s_mcc_component = {
+ };
+
+ #ifdef CONFIG_OF
++static struct mchp_i2s_mcc_soc_data mchp_i2s_mcc_sam9x60 = {
++ .data_pin_pair_num = 1,
++};
++
++static struct mchp_i2s_mcc_soc_data mchp_i2s_mcc_sama7g5 = {
++ .data_pin_pair_num = 4,
++};
++
+ static const struct of_device_id mchp_i2s_mcc_dt_ids[] = {
+ {
+ .compatible = "microchip,sam9x60-i2smcc",
++ .data = &mchp_i2s_mcc_sam9x60,
+ },
+ {
+ .compatible = "microchip,sama7g5-i2smcc",
++ .data = &mchp_i2s_mcc_sama7g5,
+ },
+ { /* sentinel */ }
+ };
+@@ -932,6 +965,11 @@ static int mchp_i2s_mcc_probe(struct platform_device *pdev)
+ dev->gclk = NULL;
+ }
+
++ dev->soc = of_device_get_match_data(&pdev->dev);
++ if (!dev->soc) {
++ dev_err(&pdev->dev, "failed to get soc data\n");
++ return -ENODEV;
++ }
+ dev->dev = &pdev->dev;
+ dev->regmap = regmap;
+ platform_set_drvdata(pdev, dev);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/152-ASoC-mchp-i2s-mcc-Add-support-to-select-TDM-pins.patch b/target/linux/at91/patches-5.10/152-ASoC-mchp-i2s-mcc-Add-support-to-select-TDM-pins.patch
new file mode 100644
index 0000000000..b4f1635e68
--- /dev/null
+++ b/target/linux/at91/patches-5.10/152-ASoC-mchp-i2s-mcc-Add-support-to-select-TDM-pins.patch
@@ -0,0 +1,113 @@
+From 2bbdc5b38603384996271a8817b0578a2360af2f Mon Sep 17 00:00:00 2001
+From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Date: Mon, 1 Mar 2021 19:09:03 +0200
+Subject: [PATCH 152/247] ASoC: mchp-i2s-mcc: Add support to select TDM pins
+
+SAMA7G5's I2S-MCC has 4 pairs of DIN/DOUT pins. Since TDM only uses a
+single pair of pins for synchronous capture and playback, the controller
+needs to be told which of the pair is connected. This can be mentioned
+using the "microchip,tdm-data-pair" property from DT. The property is
+optional, useful only if TDM is used. If it's missing, DIN/DOUT 0 pins
+will be used by default.
+
+Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Link: https://lore.kernel.org/r/20210301170905.835091-6-codrin.ciubotariu@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ sound/soc/atmel/mchp-i2s-mcc.c | 52 +++++++++++++++++++++++++++++++---
+ 1 file changed, 48 insertions(+), 4 deletions(-)
+
+diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c
+index dca4fd1e2dfd..0818fa864f0e 100644
+--- a/sound/soc/atmel/mchp-i2s-mcc.c
++++ b/sound/soc/atmel/mchp-i2s-mcc.c
+@@ -100,6 +100,8 @@
+ #define MCHP_I2SMCC_MRA_DATALENGTH_8_BITS_COMPACT (7 << 1)
+
+ #define MCHP_I2SMCC_MRA_WIRECFG_MASK GENMASK(5, 4)
++#define MCHP_I2SMCC_MRA_WIRECFG_TDM(pin) (((pin) << 4) & \
++ MCHP_I2SMCC_MRA_WIRECFG_MASK)
+ #define MCHP_I2SMCC_MRA_WIRECFG_I2S_1_TDM_0 (0 << 4)
+ #define MCHP_I2SMCC_MRA_WIRECFG_I2S_2_TDM_1 (1 << 4)
+ #define MCHP_I2SMCC_MRA_WIRECFG_I2S_4_TDM_2 (2 << 4)
+@@ -245,6 +247,7 @@ struct mchp_i2s_mcc_dev {
+ unsigned int frame_length;
+ int tdm_slots;
+ int channels;
++ u8 tdm_data_pair;
+ unsigned int gclk_use:1;
+ unsigned int gclk_running:1;
+ unsigned int tx_rdy:1;
+@@ -589,6 +592,8 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream,
+ if (!frame_length)
+ frame_length = 2 * params_physical_width(params);
+ } else if (dev->fmt & SND_SOC_DAIFMT_DSP_A) {
++ mra |= MCHP_I2SMCC_MRA_WIRECFG_TDM(dev->tdm_data_pair);
++
+ if (dev->tdm_slots) {
+ if (channels % 2 && channels * 2 <= dev->tdm_slots) {
+ /*
+@@ -914,6 +919,45 @@ static const struct of_device_id mchp_i2s_mcc_dt_ids[] = {
+ MODULE_DEVICE_TABLE(of, mchp_i2s_mcc_dt_ids);
+ #endif
+
++static int mchp_i2s_mcc_soc_data_parse(struct platform_device *pdev,
++ struct mchp_i2s_mcc_dev *dev)
++{
++ int err;
++
++ if (!dev->soc) {
++ dev_err(&pdev->dev, "failed to get soc data\n");
++ return -ENODEV;
++ }
++
++ if (dev->soc->data_pin_pair_num == 1)
++ return 0;
++
++ err = of_property_read_u8(pdev->dev.of_node, "microchip,tdm-data-pair",
++ &dev->tdm_data_pair);
++ if (err < 0 && err != -EINVAL) {
++ dev_err(&pdev->dev,
++ "bad property data for 'microchip,tdm-data-pair': %d",
++ err);
++ return err;
++ }
++ if (err == -EINVAL) {
++ dev_info(&pdev->dev,
++ "'microchip,tdm-data-pair' not found; assuming DIN/DOUT 0 for TDM\n");
++ dev->tdm_data_pair = 0;
++ } else {
++ if (dev->tdm_data_pair > dev->soc->data_pin_pair_num - 1) {
++ dev_err(&pdev->dev,
++ "invalid value for 'microchip,tdm-data-pair': %d\n",
++ dev->tdm_data_pair);
++ return -EINVAL;
++ }
++ dev_dbg(&pdev->dev, "TMD format on DIN/DOUT %d pins\n",
++ dev->tdm_data_pair);
++ }
++
++ return 0;
++}
++
+ static int mchp_i2s_mcc_probe(struct platform_device *pdev)
+ {
+ struct mchp_i2s_mcc_dev *dev;
+@@ -966,10 +1010,10 @@ static int mchp_i2s_mcc_probe(struct platform_device *pdev)
+ }
+
+ dev->soc = of_device_get_match_data(&pdev->dev);
+- if (!dev->soc) {
+- dev_err(&pdev->dev, "failed to get soc data\n");
+- return -ENODEV;
+- }
++ err = mchp_i2s_mcc_soc_data_parse(pdev, dev);
++ if (err < 0)
++ return err;
++
+ dev->dev = &pdev->dev;
+ dev->regmap = regmap;
+ platform_set_drvdata(pdev, dev);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/153-ASoC-mchp-i2s-mcc-Add-FIFOs-support.patch b/target/linux/at91/patches-5.10/153-ASoC-mchp-i2s-mcc-Add-FIFOs-support.patch
new file mode 100644
index 0000000000..cf2063b884
--- /dev/null
+++ b/target/linux/at91/patches-5.10/153-ASoC-mchp-i2s-mcc-Add-FIFOs-support.patch
@@ -0,0 +1,192 @@
+From 36bb4f0ab8e7ef69cc11d4d888aa898223b0e901 Mon Sep 17 00:00:00 2001
+From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Date: Mon, 1 Mar 2021 19:09:04 +0200
+Subject: [PATCH 153/247] ASoC: mchp-i2s-mcc: Add FIFOs support
+
+I2S-MCC found on SAMA7G5 includes 2 FIFOs (capture and playback). When
+FIFOs are enabled, bits I2SMCC_ISRA.TXLRDYx and I2SMCC_ISRA.TXRRDYx must
+not be used. Bits I2SMCC_ISRB.TXFFRDY and I2SMCC_ISRB.RXFFRDY must be used
+instead.
+
+Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Link: https://lore.kernel.org/r/20210301170905.835091-7-codrin.ciubotariu@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ sound/soc/atmel/mchp-i2s-mcc.c | 76 +++++++++++++++++++++++++---------
+ 1 file changed, 56 insertions(+), 20 deletions(-)
+
+diff --git a/sound/soc/atmel/mchp-i2s-mcc.c b/sound/soc/atmel/mchp-i2s-mcc.c
+index 0818fa864f0e..188484e84f94 100644
+--- a/sound/soc/atmel/mchp-i2s-mcc.c
++++ b/sound/soc/atmel/mchp-i2s-mcc.c
+@@ -176,7 +176,7 @@
+ */
+ #define MCHP_I2SMCC_MRB_CRAMODE_REGULAR (1 << 0)
+
+-#define MCHP_I2SMCC_MRB_FIFOEN BIT(1)
++#define MCHP_I2SMCC_MRB_FIFOEN BIT(4)
+
+ #define MCHP_I2SMCC_MRB_DMACHUNK_MASK GENMASK(9, 8)
+ #define MCHP_I2SMCC_MRB_DMACHUNK(no_words) \
+@@ -230,6 +230,7 @@ static const struct regmap_config mchp_i2s_mcc_regmap_config = {
+
+ struct mchp_i2s_mcc_soc_data {
+ unsigned int data_pin_pair_num;
++ bool has_fifo;
+ };
+
+ struct mchp_i2s_mcc_dev {
+@@ -257,7 +258,7 @@ struct mchp_i2s_mcc_dev {
+ static irqreturn_t mchp_i2s_mcc_interrupt(int irq, void *dev_id)
+ {
+ struct mchp_i2s_mcc_dev *dev = dev_id;
+- u32 sra, imra, srb, imrb, pendinga, pendingb, idra = 0;
++ u32 sra, imra, srb, imrb, pendinga, pendingb, idra = 0, idrb = 0;
+ irqreturn_t ret = IRQ_NONE;
+
+ regmap_read(dev->regmap, MCHP_I2SMCC_IMRA, &imra);
+@@ -275,24 +276,36 @@ static irqreturn_t mchp_i2s_mcc_interrupt(int irq, void *dev_id)
+ * Tx/Rx ready interrupts are enabled when stopping only, to assure
+ * availability and to disable clocks if necessary
+ */
+- idra |= pendinga & (MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels) |
+- MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels));
+- if (idra)
++ if (dev->soc->has_fifo) {
++ idrb |= pendingb & (MCHP_I2SMCC_INT_TXFFRDY |
++ MCHP_I2SMCC_INT_RXFFRDY);
++ } else {
++ idra |= pendinga & (MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels) |
++ MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels));
++ }
++ if (idra || idrb)
+ ret = IRQ_HANDLED;
+
+- if ((imra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)) &&
+- (imra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)) ==
+- (idra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels))) {
++ if ((!dev->soc->has_fifo &&
++ (imra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)) &&
++ (imra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels)) ==
++ (idra & MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels))) ||
++ (dev->soc->has_fifo && imrb & MCHP_I2SMCC_INT_TXFFRDY)) {
+ dev->tx_rdy = 1;
+ wake_up_interruptible(&dev->wq_txrdy);
+ }
+- if ((imra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)) &&
+- (imra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)) ==
+- (idra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels))) {
++ if ((!dev->soc->has_fifo &&
++ (imra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)) &&
++ (imra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels)) ==
++ (idra & MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels))) ||
++ (dev->soc->has_fifo && imrb & MCHP_I2SMCC_INT_RXFFRDY)) {
+ dev->rx_rdy = 1;
+ wake_up_interruptible(&dev->wq_rxrdy);
+ }
+- regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, idra);
++ if (dev->soc->has_fifo)
++ regmap_write(dev->regmap, MCHP_I2SMCC_IDRB, idrb);
++ else
++ regmap_write(dev->regmap, MCHP_I2SMCC_IDRA, idra);
+
+ return ret;
+ }
+@@ -664,6 +677,10 @@ static int mchp_i2s_mcc_hw_params(struct snd_pcm_substream *substream,
+ }
+ }
+
++ /* enable FIFO if available */
++ if (dev->soc->has_fifo)
++ mrb |= MCHP_I2SMCC_MRB_FIFOEN;
++
+ /*
+ * If we are already running, the wanted setup must be
+ * the same with the one that's currently ongoing
+@@ -726,8 +743,13 @@ static int mchp_i2s_mcc_hw_free(struct snd_pcm_substream *substream,
+ if (err == 0) {
+ dev_warn_once(dev->dev,
+ "Timeout waiting for Tx ready\n");
+- regmap_write(dev->regmap, MCHP_I2SMCC_IDRA,
+- MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels));
++ if (dev->soc->has_fifo)
++ regmap_write(dev->regmap, MCHP_I2SMCC_IDRB,
++ MCHP_I2SMCC_INT_TXFFRDY);
++ else
++ regmap_write(dev->regmap, MCHP_I2SMCC_IDRA,
++ MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels));
++
+ dev->tx_rdy = 1;
+ }
+ } else {
+@@ -737,8 +759,12 @@ static int mchp_i2s_mcc_hw_free(struct snd_pcm_substream *substream,
+ if (err == 0) {
+ dev_warn_once(dev->dev,
+ "Timeout waiting for Rx ready\n");
+- regmap_write(dev->regmap, MCHP_I2SMCC_IDRA,
+- MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels));
++ if (dev->soc->has_fifo)
++ regmap_write(dev->regmap, MCHP_I2SMCC_IDRB,
++ MCHP_I2SMCC_INT_RXFFRDY);
++ else
++ regmap_write(dev->regmap, MCHP_I2SMCC_IDRA,
++ MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels));
+ dev->rx_rdy = 1;
+ }
+ }
+@@ -765,7 +791,7 @@ static int mchp_i2s_mcc_trigger(struct snd_pcm_substream *substream, int cmd,
+ struct mchp_i2s_mcc_dev *dev = snd_soc_dai_get_drvdata(dai);
+ bool is_playback = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
+ u32 cr = 0;
+- u32 iera = 0;
++ u32 iera = 0, ierb = 0;
+ u32 sr;
+ int err;
+
+@@ -789,7 +815,10 @@ static int mchp_i2s_mcc_trigger(struct snd_pcm_substream *substream, int cmd,
+ * Enable Tx Ready interrupts on all channels
+ * to assure all data is sent
+ */
+- iera = MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels);
++ if (dev->soc->has_fifo)
++ ierb = MCHP_I2SMCC_INT_TXFFRDY;
++ else
++ iera = MCHP_I2SMCC_INT_TXRDY_MASK(dev->channels);
+ } else if (!is_playback && (sr & MCHP_I2SMCC_SR_RXEN)) {
+ cr = MCHP_I2SMCC_CR_RXDIS;
+ dev->rx_rdy = 0;
+@@ -797,7 +826,10 @@ static int mchp_i2s_mcc_trigger(struct snd_pcm_substream *substream, int cmd,
+ * Enable Rx Ready interrupts on all channels
+ * to assure all data is received
+ */
+- iera = MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels);
++ if (dev->soc->has_fifo)
++ ierb = MCHP_I2SMCC_INT_RXFFRDY;
++ else
++ iera = MCHP_I2SMCC_INT_RXRDY_MASK(dev->channels);
+ }
+ break;
+ default:
+@@ -815,7 +847,10 @@ static int mchp_i2s_mcc_trigger(struct snd_pcm_substream *substream, int cmd,
+ }
+ }
+
+- regmap_write(dev->regmap, MCHP_I2SMCC_IERA, iera);
++ if (dev->soc->has_fifo)
++ regmap_write(dev->regmap, MCHP_I2SMCC_IERB, ierb);
++ else
++ regmap_write(dev->regmap, MCHP_I2SMCC_IERA, iera);
+ regmap_write(dev->regmap, MCHP_I2SMCC_CR, cr);
+
+ return 0;
+@@ -903,6 +938,7 @@ static struct mchp_i2s_mcc_soc_data mchp_i2s_mcc_sam9x60 = {
+
+ static struct mchp_i2s_mcc_soc_data mchp_i2s_mcc_sama7g5 = {
+ .data_pin_pair_num = 4,
++ .has_fifo = true,
+ };
+
+ static const struct of_device_id mchp_i2s_mcc_dt_ids[] = {
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch b/target/linux/at91/patches-5.10/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch
new file mode 100644
index 0000000000..6235f91b9c
--- /dev/null
+++ b/target/linux/at91/patches-5.10/154-pinctrl-at91-pio4-Fix-slew-rate-disablement.patch
@@ -0,0 +1,54 @@
+From dc07cbae6e96843d26e8f10b16e901620bd16462 Mon Sep 17 00:00:00 2001
+From: Tudor Ambarus <tudor.ambarus@microchip.com>
+Date: Fri, 9 Apr 2021 11:25:22 +0300
+Subject: [PATCH 154/247] pinctrl: at91-pio4: Fix slew rate disablement
+
+The slew rate was enabled by default for each configuration of the
+pin. In case the pin had more than one configuration, even if
+we set the slew rate as disabled in the device tree, the next pin
+configuration would set again the slew rate enabled by default,
+overwriting the slew rate disablement.
+Instead of enabling the slew rate by default for each pin configuration,
+enable the slew rate by default just once per pin, regardless of the
+number of configurations. This way the slew rate disablement will also
+work for cases where pins have multiple configurations.
+
+Fixes: c709135e576b ("pinctrl: at91-pio4: add support for slew-rate")
+Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
+Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
+Link: https://lore.kernel.org/r/20210409082522.625168-1-tudor.ambarus@microchip.com
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ drivers/pinctrl/pinctrl-at91-pio4.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/pinctrl/pinctrl-at91-pio4.c b/drivers/pinctrl/pinctrl-at91-pio4.c
+index a5d328808e4c..4c01d8471ffa 100644
+--- a/drivers/pinctrl/pinctrl-at91-pio4.c
++++ b/drivers/pinctrl/pinctrl-at91-pio4.c
+@@ -801,6 +801,10 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
+
+ conf = atmel_pin_config_read(pctldev, pin_id);
+
++ /* Keep slew rate enabled by default. */
++ if (atmel_pioctrl->slew_rate_support)
++ conf |= ATMEL_PIO_SR_MASK;
++
+ for (i = 0; i < num_configs; i++) {
+ unsigned int param = pinconf_to_config_param(configs[i]);
+ unsigned int arg = pinconf_to_config_argument(configs[i]);
+@@ -808,10 +812,6 @@ static int atmel_conf_pin_config_group_set(struct pinctrl_dev *pctldev,
+ dev_dbg(pctldev->dev, "%s: pin=%u, config=0x%lx\n",
+ __func__, pin_id, configs[i]);
+
+- /* Keep slew rate enabled by default. */
+- if (atmel_pioctrl->slew_rate_support)
+- conf |= ATMEL_PIO_SR_MASK;
+-
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ conf &= (~ATMEL_PIO_PUEN_MASK);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/155-media-atmel-properly-get-pm_runtime.patch b/target/linux/at91/patches-5.10/155-media-atmel-properly-get-pm_runtime.patch
new file mode 100644
index 0000000000..f8e7a24ce6
--- /dev/null
+++ b/target/linux/at91/patches-5.10/155-media-atmel-properly-get-pm_runtime.patch
@@ -0,0 +1,166 @@
+From c7660cc977621c4a14d870d523918df067f0db39 Mon Sep 17 00:00:00 2001
+From: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+Date: Fri, 23 Apr 2021 16:47:42 +0200
+Subject: [PATCH 155/247] media: atmel: properly get pm_runtime
+
+There are several issues in the way the atmel driver handles
+pm_runtime_get_sync():
+
+- it doesn't check return codes;
+- it doesn't properly decrement the usage_count on all places;
+- it starts streaming even if pm_runtime_get_sync() fails.
+- while it tries to get pm_runtime at the clock enable logic,
+ it doesn't check if the operation was suceeded.
+
+Replace all occurrences of it to use the new kAPI:
+pm_runtime_resume_and_get(), which ensures that, if the
+return code is not negative, the usage_count was incremented.
+
+With that, add additional checks when this is called, in order
+to ensure that errors will be properly addressed.
+
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 30 ++++++++++++++-----
+ drivers/media/platform/atmel/atmel-isi.c | 19 +++++++++---
+ 2 files changed, 38 insertions(+), 11 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index fe3ec8d0eaee..ce8e1351fa53 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -294,9 +294,13 @@ static int isc_wait_clk_stable(struct clk_hw *hw)
+ static int isc_clk_prepare(struct clk_hw *hw)
+ {
+ struct isc_clk *isc_clk = to_isc_clk(hw);
++ int ret;
+
+- if (isc_clk->id == ISC_ISPCK)
+- pm_runtime_get_sync(isc_clk->dev);
++ if (isc_clk->id == ISC_ISPCK) {
++ ret = pm_runtime_resume_and_get(isc_clk->dev);
++ if (ret < 0)
++ return ret;
++ }
+
+ return isc_wait_clk_stable(hw);
+ }
+@@ -353,9 +357,13 @@ static int isc_clk_is_enabled(struct clk_hw *hw)
+ {
+ struct isc_clk *isc_clk = to_isc_clk(hw);
+ u32 status;
++ int ret;
+
+- if (isc_clk->id == ISC_ISPCK)
+- pm_runtime_get_sync(isc_clk->dev);
++ if (isc_clk->id == ISC_ISPCK) {
++ ret = pm_runtime_resume_and_get(isc_clk->dev);
++ if (ret < 0)
++ return 0;
++ }
+
+ regmap_read(isc_clk->regmap, ISC_CLKSR, &status);
+
+@@ -807,7 +815,12 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
+ goto err_start_stream;
+ }
+
+- pm_runtime_get_sync(isc->dev);
++ ret = pm_runtime_resume_and_get(isc->dev);
++ if (ret < 0) {
++ v4l2_err(&isc->v4l2_dev, "RPM resume failed in subdev %d\n",
++ ret);
++ goto err_pm_get;
++ }
+
+ ret = isc_configure(isc);
+ if (unlikely(ret))
+@@ -838,7 +851,7 @@ static int isc_start_streaming(struct vb2_queue *vq, unsigned int count)
+
+ err_configure:
+ pm_runtime_put_sync(isc->dev);
+-
++err_pm_get:
+ v4l2_subdev_call(isc->current_subdev->sd, video, s_stream, 0);
+
+ err_start_stream:
+@@ -1809,6 +1822,7 @@ static void isc_awb_work(struct work_struct *w)
+ u32 baysel;
+ unsigned long flags;
+ u32 min, max;
++ int ret;
+
+ /* streaming is not active anymore */
+ if (isc->stop)
+@@ -1831,7 +1845,9 @@ static void isc_awb_work(struct work_struct *w)
+ ctrls->hist_id = hist_id;
+ baysel = isc->config.sd_format->cfa_baycfg << ISC_HIS_CFG_BAYSEL_SHIFT;
+
+- pm_runtime_get_sync(isc->dev);
++ ret = pm_runtime_resume_and_get(isc->dev);
++ if (ret < 0)
++ return;
+
+ /*
+ * only update if we have all the required histograms and controls
+diff --git a/drivers/media/platform/atmel/atmel-isi.c b/drivers/media/platform/atmel/atmel-isi.c
+index d74aa73f26be..4ac5b7c19d0c 100644
+--- a/drivers/media/platform/atmel/atmel-isi.c
++++ b/drivers/media/platform/atmel/atmel-isi.c
+@@ -423,7 +423,9 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
+ struct frame_buffer *buf, *node;
+ int ret;
+
+- pm_runtime_get_sync(isi->dev);
++ ret = pm_runtime_resume_and_get(isi->dev);
++ if (ret < 0)
++ return ret;
+
+ /* Enable stream on the sub device */
+ ret = v4l2_subdev_call(isi->entity.subdev, video, s_stream, 1);
+@@ -783,9 +785,10 @@ static int isi_enum_frameintervals(struct file *file, void *fh,
+ return 0;
+ }
+
+-static void isi_camera_set_bus_param(struct atmel_isi *isi)
++static int isi_camera_set_bus_param(struct atmel_isi *isi)
+ {
+ u32 cfg1 = 0;
++ int ret;
+
+ /* set bus param for ISI */
+ if (isi->pdata.hsync_act_low)
+@@ -802,12 +805,16 @@ static void isi_camera_set_bus_param(struct atmel_isi *isi)
+ cfg1 |= ISI_CFG1_THMASK_BEATS_16;
+
+ /* Enable PM and peripheral clock before operate isi registers */
+- pm_runtime_get_sync(isi->dev);
++ ret = pm_runtime_resume_and_get(isi->dev);
++ if (ret < 0)
++ return ret;
+
+ isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS);
+ isi_writel(isi, ISI_CFG1, cfg1);
+
+ pm_runtime_put(isi->dev);
++
++ return 0;
+ }
+
+ /* -----------------------------------------------------------------------*/
+@@ -1086,7 +1093,11 @@ static int isi_graph_notify_complete(struct v4l2_async_notifier *notifier)
+ dev_err(isi->dev, "No supported mediabus format found\n");
+ return ret;
+ }
+- isi_camera_set_bus_param(isi);
++ ret = isi_camera_set_bus_param(isi);
++ if (ret) {
++ dev_err(isi->dev, "Can't wake up device\n");
++ return ret;
++ }
+
+ ret = isi_set_default_fmt(isi);
+ if (ret) {
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/156-media-atmel-atmel-isc-Remove-redundant-assignment-to.patch b/target/linux/at91/patches-5.10/156-media-atmel-atmel-isc-Remove-redundant-assignment-to.patch
new file mode 100644
index 0000000000..4efc841078
--- /dev/null
+++ b/target/linux/at91/patches-5.10/156-media-atmel-atmel-isc-Remove-redundant-assignment-to.patch
@@ -0,0 +1,37 @@
+From b074b4695004b793a9199716295cb76da6c41686 Mon Sep 17 00:00:00 2001
+From: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
+Date: Mon, 17 May 2021 12:07:48 +0200
+Subject: [PATCH 156/247] media: atmel: atmel-isc: Remove redundant assignment
+ to i
+
+Variable i is being assigned a value however the assignment is
+never read, so this redundant assignment can be removed.
+
+Clean up the following clang-analyzer warning:
+
+drivers/media/platform/atmel/atmel-isc-base.c:975:2: warning: Value
+stored to 'i' is never read [clang-analyzer-deadcode.DeadStores].
+
+Reported-by: Abaci Robot <abaci@linux.alibaba.com>
+Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index ce8e1351fa53..a017572c870c 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -972,7 +972,6 @@ static int isc_enum_fmt_vid_cap(struct file *file, void *priv,
+
+ index -= ARRAY_SIZE(controller_formats);
+
+- i = 0;
+ supported_index = 0;
+
+ for (i = 0; i < ARRAY_SIZE(formats_list); i++) {
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/157-media-atmel-atmel-isc-specialize-gamma-table-into-pr.patch b/target/linux/at91/patches-5.10/157-media-atmel-atmel-isc-specialize-gamma-table-into-pr.patch
new file mode 100644
index 0000000000..838d6b2cf8
--- /dev/null
+++ b/target/linux/at91/patches-5.10/157-media-atmel-atmel-isc-specialize-gamma-table-into-pr.patch
@@ -0,0 +1,196 @@
+From c3f54d192dc7344c5216a3628b67c4bbccbf8c3c Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:56:59 +0200
+Subject: [PATCH 157/247] media: atmel: atmel-isc: specialize gamma table into
+ product specific
+
+Separate the gamma table from the isc base file into the specific sama5d2
+product file.
+Add a pointer to the gamma table and entries count inside the platform
+driver specific struct.
+
+[hverkuil: made isc_sama5d2_gamma_table static]
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 47 ++-----------------
+ drivers/media/platform/atmel/atmel-isc.h | 11 +++--
+ .../media/platform/atmel/atmel-sama5d2-isc.c | 45 ++++++++++++++++++
+ 3 files changed, 56 insertions(+), 47 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index a017572c870c..46d384332a58 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -176,48 +176,6 @@ struct isc_format formats_list[] = {
+
+ };
+
+-/* Gamma table with gamma 1/2.2 */
+-const u32 isc_gamma_table[GAMMA_MAX + 1][GAMMA_ENTRIES] = {
+- /* 0 --> gamma 1/1.8 */
+- { 0x65, 0x66002F, 0x950025, 0xBB0020, 0xDB001D, 0xF8001A,
+- 0x1130018, 0x12B0017, 0x1420016, 0x1580014, 0x16D0013, 0x1810012,
+- 0x1940012, 0x1A60012, 0x1B80011, 0x1C90010, 0x1DA0010, 0x1EA000F,
+- 0x1FA000F, 0x209000F, 0x218000F, 0x227000E, 0x235000E, 0x243000E,
+- 0x251000E, 0x25F000D, 0x26C000D, 0x279000D, 0x286000D, 0x293000C,
+- 0x2A0000C, 0x2AC000C, 0x2B8000C, 0x2C4000C, 0x2D0000B, 0x2DC000B,
+- 0x2E7000B, 0x2F3000B, 0x2FE000B, 0x309000B, 0x314000B, 0x31F000A,
+- 0x32A000A, 0x334000B, 0x33F000A, 0x349000A, 0x354000A, 0x35E000A,
+- 0x368000A, 0x372000A, 0x37C000A, 0x386000A, 0x3900009, 0x399000A,
+- 0x3A30009, 0x3AD0009, 0x3B60009, 0x3BF000A, 0x3C90009, 0x3D20009,
+- 0x3DB0009, 0x3E40009, 0x3ED0009, 0x3F60009 },
+-
+- /* 1 --> gamma 1/2 */
+- { 0x7F, 0x800034, 0xB50028, 0xDE0021, 0x100001E, 0x11E001B,
+- 0x1390019, 0x1520017, 0x16A0015, 0x1800014, 0x1940014, 0x1A80013,
+- 0x1BB0012, 0x1CD0011, 0x1DF0010, 0x1EF0010, 0x200000F, 0x20F000F,
+- 0x21F000E, 0x22D000F, 0x23C000E, 0x24A000E, 0x258000D, 0x265000D,
+- 0x273000C, 0x27F000D, 0x28C000C, 0x299000C, 0x2A5000C, 0x2B1000B,
+- 0x2BC000C, 0x2C8000B, 0x2D3000C, 0x2DF000B, 0x2EA000A, 0x2F5000A,
+- 0x2FF000B, 0x30A000A, 0x314000B, 0x31F000A, 0x329000A, 0x333000A,
+- 0x33D0009, 0x3470009, 0x350000A, 0x35A0009, 0x363000A, 0x36D0009,
+- 0x3760009, 0x37F0009, 0x3880009, 0x3910009, 0x39A0009, 0x3A30009,
+- 0x3AC0008, 0x3B40009, 0x3BD0008, 0x3C60008, 0x3CE0008, 0x3D60009,
+- 0x3DF0008, 0x3E70008, 0x3EF0008, 0x3F70008 },
+-
+- /* 2 --> gamma 1/2.2 */
+- { 0x99, 0x9B0038, 0xD4002A, 0xFF0023, 0x122001F, 0x141001B,
+- 0x15D0019, 0x1760017, 0x18E0015, 0x1A30015, 0x1B80013, 0x1CC0012,
+- 0x1DE0011, 0x1F00010, 0x2010010, 0x2110010, 0x221000F, 0x230000F,
+- 0x23F000E, 0x24D000E, 0x25B000D, 0x269000C, 0x276000C, 0x283000C,
+- 0x28F000C, 0x29B000C, 0x2A7000C, 0x2B3000B, 0x2BF000B, 0x2CA000B,
+- 0x2D5000B, 0x2E0000A, 0x2EB000A, 0x2F5000A, 0x2FF000A, 0x30A000A,
+- 0x3140009, 0x31E0009, 0x327000A, 0x3310009, 0x33A0009, 0x3440009,
+- 0x34D0009, 0x3560009, 0x35F0009, 0x3680008, 0x3710008, 0x3790009,
+- 0x3820008, 0x38A0008, 0x3930008, 0x39B0008, 0x3A30008, 0x3AB0008,
+- 0x3B30008, 0x3BB0008, 0x3C30008, 0x3CB0007, 0x3D20008, 0x3DA0007,
+- 0x3E20007, 0x3E90007, 0x3F00008, 0x3F80007 },
+-};
+-
+ #define ISC_IS_FORMAT_RAW(mbus_code) \
+ (((mbus_code) & 0xf000) == 0x3000)
+
+@@ -691,7 +649,7 @@ static void isc_set_pipeline(struct isc_device *isc, u32 pipeline)
+
+ regmap_write(regmap, ISC_CFA_CFG, bay_cfg | ISC_CFA_CFG_EITPOL);
+
+- gamma = &isc_gamma_table[ctrls->gamma_index][0];
++ gamma = &isc->gamma_table[ctrls->gamma_index][0];
+ regmap_bulk_write(regmap, ISC_GAM_BENTRY, gamma, GAMMA_ENTRIES);
+ regmap_bulk_write(regmap, ISC_GAM_GENTRY, gamma, GAMMA_ENTRIES);
+ regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES);
+@@ -2085,7 +2043,8 @@ static int isc_ctrl_init(struct isc_device *isc)
+
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -1024, 1023, 1, 0);
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 256);
+- v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAMMA, 0, GAMMA_MAX, 1, 2);
++ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAMMA, 0, isc->gamma_max, 1,
++ isc->gamma_max);
+ isc->awb_ctrl = v4l2_ctrl_new_std(hdl, &isc_awb_ops,
+ V4L2_CID_AUTO_WHITE_BALANCE,
+ 0, 1, 1, 1);
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 24b784b893d6..a85b99274e34 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -186,6 +186,10 @@ struct isc_ctrls {
+ *
+ * @current_subdev: current subdevice: the sensor
+ * @subdev_entities: list of subdevice entitites
++ *
++ * @gamma_table: pointer to the table with gamma values, has
++ * gamma_max sets of GAMMA_ENTRIES entries each
++ * @gamma_max: maximum number of sets of inside the gamma_table
+ */
+ struct isc_device {
+ struct regmap *regmap;
+@@ -244,16 +248,17 @@ struct isc_device {
+ struct v4l2_ctrl *gr_off_ctrl;
+ struct v4l2_ctrl *gb_off_ctrl;
+ };
+-};
+
+-#define GAMMA_MAX 2
+ #define GAMMA_ENTRIES 64
++ /* pointer to the defined gamma table */
++ const u32 (*gamma_table)[GAMMA_ENTRIES];
++ u32 gamma_max;
++};
+
+ #define ATMEL_ISC_NAME "atmel-isc"
+
+ extern struct isc_format formats_list[];
+ extern const struct isc_format controller_formats[];
+-extern const u32 isc_gamma_table[GAMMA_MAX + 1][GAMMA_ENTRIES];
+ extern const struct regmap_config isc_regmap_config;
+ extern const struct v4l2_async_notifier_operations isc_async_ops;
+
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index a3304f49e499..1b537cd1e09e 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -54,6 +54,48 @@
+
+ #define ISC_CLK_MAX_DIV 255
+
++/* Gamma table with gamma 1/2.2 */
++static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
++ /* 0 --> gamma 1/1.8 */
++ { 0x65, 0x66002F, 0x950025, 0xBB0020, 0xDB001D, 0xF8001A,
++ 0x1130018, 0x12B0017, 0x1420016, 0x1580014, 0x16D0013, 0x1810012,
++ 0x1940012, 0x1A60012, 0x1B80011, 0x1C90010, 0x1DA0010, 0x1EA000F,
++ 0x1FA000F, 0x209000F, 0x218000F, 0x227000E, 0x235000E, 0x243000E,
++ 0x251000E, 0x25F000D, 0x26C000D, 0x279000D, 0x286000D, 0x293000C,
++ 0x2A0000C, 0x2AC000C, 0x2B8000C, 0x2C4000C, 0x2D0000B, 0x2DC000B,
++ 0x2E7000B, 0x2F3000B, 0x2FE000B, 0x309000B, 0x314000B, 0x31F000A,
++ 0x32A000A, 0x334000B, 0x33F000A, 0x349000A, 0x354000A, 0x35E000A,
++ 0x368000A, 0x372000A, 0x37C000A, 0x386000A, 0x3900009, 0x399000A,
++ 0x3A30009, 0x3AD0009, 0x3B60009, 0x3BF000A, 0x3C90009, 0x3D20009,
++ 0x3DB0009, 0x3E40009, 0x3ED0009, 0x3F60009 },
++
++ /* 1 --> gamma 1/2 */
++ { 0x7F, 0x800034, 0xB50028, 0xDE0021, 0x100001E, 0x11E001B,
++ 0x1390019, 0x1520017, 0x16A0015, 0x1800014, 0x1940014, 0x1A80013,
++ 0x1BB0012, 0x1CD0011, 0x1DF0010, 0x1EF0010, 0x200000F, 0x20F000F,
++ 0x21F000E, 0x22D000F, 0x23C000E, 0x24A000E, 0x258000D, 0x265000D,
++ 0x273000C, 0x27F000D, 0x28C000C, 0x299000C, 0x2A5000C, 0x2B1000B,
++ 0x2BC000C, 0x2C8000B, 0x2D3000C, 0x2DF000B, 0x2EA000A, 0x2F5000A,
++ 0x2FF000B, 0x30A000A, 0x314000B, 0x31F000A, 0x329000A, 0x333000A,
++ 0x33D0009, 0x3470009, 0x350000A, 0x35A0009, 0x363000A, 0x36D0009,
++ 0x3760009, 0x37F0009, 0x3880009, 0x3910009, 0x39A0009, 0x3A30009,
++ 0x3AC0008, 0x3B40009, 0x3BD0008, 0x3C60008, 0x3CE0008, 0x3D60009,
++ 0x3DF0008, 0x3E70008, 0x3EF0008, 0x3F70008 },
++
++ /* 2 --> gamma 1/2.2 */
++ { 0x99, 0x9B0038, 0xD4002A, 0xFF0023, 0x122001F, 0x141001B,
++ 0x15D0019, 0x1760017, 0x18E0015, 0x1A30015, 0x1B80013, 0x1CC0012,
++ 0x1DE0011, 0x1F00010, 0x2010010, 0x2110010, 0x221000F, 0x230000F,
++ 0x23F000E, 0x24D000E, 0x25B000D, 0x269000C, 0x276000C, 0x283000C,
++ 0x28F000C, 0x29B000C, 0x2A7000C, 0x2B3000B, 0x2BF000B, 0x2CA000B,
++ 0x2D5000B, 0x2E0000A, 0x2EB000A, 0x2F5000A, 0x2FF000A, 0x30A000A,
++ 0x3140009, 0x31E0009, 0x327000A, 0x3310009, 0x33A0009, 0x3440009,
++ 0x34D0009, 0x3560009, 0x35F0009, 0x3680008, 0x3710008, 0x3790009,
++ 0x3820008, 0x38A0008, 0x3930008, 0x39B0008, 0x3A30008, 0x3AB0008,
++ 0x3B30008, 0x3BB0008, 0x3C30008, 0x3CB0007, 0x3D20008, 0x3DA0007,
++ 0x3E20007, 0x3E90007, 0x3F00008, 0x3F80007 },
++};
++
+ static int isc_parse_dt(struct device *dev, struct isc_device *isc)
+ {
+ struct device_node *np = dev->of_node;
+@@ -171,6 +213,9 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ return ret;
+ }
+
++ isc->gamma_table = isc_sama5d2_gamma_table;
++ isc->gamma_max = 2;
++
+ ret = isc_pipeline_init(isc);
+ if (ret)
+ return ret;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/158-media-atmel-atmel-isc-specialize-driver-name-constan.patch b/target/linux/at91/patches-5.10/158-media-atmel-atmel-isc-specialize-driver-name-constan.patch
new file mode 100644
index 0000000000..b27552caa5
--- /dev/null
+++ b/target/linux/at91/patches-5.10/158-media-atmel-atmel-isc-specialize-driver-name-constan.patch
@@ -0,0 +1,79 @@
+From 0576e163d93d08a1ed112bd23f40478ef3fd323d Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:00 +0200
+Subject: [PATCH 158/247] media: atmel: atmel-isc: specialize driver name
+ constant
+
+The driver name constant must defined based on product driver, thus moving
+the constant directly where it's required. This will allow each ISC based
+product to define it's own name.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 4 ++--
+ drivers/media/platform/atmel/atmel-isc.h | 2 --
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 4 ++--
+ 3 files changed, 4 insertions(+), 6 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 46d384332a58..d987a8891bd9 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -909,7 +909,7 @@ static int isc_querycap(struct file *file, void *priv,
+ {
+ struct isc_device *isc = video_drvdata(file);
+
+- strscpy(cap->driver, ATMEL_ISC_NAME, sizeof(cap->driver));
++ strscpy(cap->driver, "microchip-isc", sizeof(cap->driver));
+ strscpy(cap->card, "Atmel Image Sensor Controller", sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info),
+ "platform:%s", isc->v4l2_dev.name);
+@@ -2261,7 +2261,7 @@ static int isc_async_complete(struct v4l2_async_notifier *notifier)
+ }
+
+ /* Register video device */
+- strscpy(vdev->name, ATMEL_ISC_NAME, sizeof(vdev->name));
++ strscpy(vdev->name, "microchip-isc", sizeof(vdev->name));
+ vdev->release = video_device_release_empty;
+ vdev->fops = &isc_fops;
+ vdev->ioctl_ops = &isc_ioctl_ops;
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index a85b99274e34..bb43d3a93052 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -255,8 +255,6 @@ struct isc_device {
+ u32 gamma_max;
+ };
+
+-#define ATMEL_ISC_NAME "atmel-isc"
+-
+ extern struct isc_format formats_list[];
+ extern const struct isc_format controller_formats[];
+ extern const struct regmap_config isc_regmap_config;
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index 1b537cd1e09e..cba6e6c8810b 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -206,7 +206,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ return irq;
+
+ ret = devm_request_irq(dev, irq, isc_interrupt, 0,
+- ATMEL_ISC_NAME, isc);
++ "atmel-sama5d2-isc", isc);
+ if (ret < 0) {
+ dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n",
+ irq, ret);
+@@ -378,7 +378,7 @@ static struct platform_driver atmel_isc_driver = {
+ .probe = atmel_isc_probe,
+ .remove = atmel_isc_remove,
+ .driver = {
+- .name = ATMEL_ISC_NAME,
++ .name = "atmel-sama5d2-isc",
+ .pm = &atmel_isc_dev_pm_ops,
+ .of_match_table = of_match_ptr(atmel_isc_of_match),
+ },
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/159-media-atmel-atmel-isc-add-checks-for-limiting-frame-.patch b/target/linux/at91/patches-5.10/159-media-atmel-atmel-isc-add-checks-for-limiting-frame-.patch
new file mode 100644
index 0000000000..24b6598d3c
--- /dev/null
+++ b/target/linux/at91/patches-5.10/159-media-atmel-atmel-isc-add-checks-for-limiting-frame-.patch
@@ -0,0 +1,50 @@
+From de8fa25cdf3726c83ac0d7b3b1e28bcb6334aadd Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:01 +0200
+Subject: [PATCH 159/247] media: atmel: atmel-isc: add checks for limiting
+ frame sizes
+
+When calling the subdev, certain subdev drivers will overwrite the
+frame size and adding sizes which are beyond the ISC's capabilities.
+Thus we need to ensure the frame size is cropped to the maximum caps.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index d987a8891bd9..02f1d1c6b06e 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -1338,6 +1338,12 @@ static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f,
+
+ v4l2_fill_pix_format(pixfmt, &format.format);
+
++ /* Limit to Atmel ISC hardware capabilities */
++ if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
++ pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
++ if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
++ pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
++
+ pixfmt->field = V4L2_FIELD_NONE;
+ pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp) >> 3;
+ pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height;
+@@ -1373,6 +1379,12 @@ static int isc_set_fmt(struct isc_device *isc, struct v4l2_format *f)
+ if (ret < 0)
+ return ret;
+
++ /* Limit to Atmel ISC hardware capabilities */
++ if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
++ pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
++ if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
++ pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
++
+ isc->fmt = *f;
+
+ if (isc->try_config.sd_format && isc->config.sd_format &&
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/160-media-atmel-atmel-isc-specialize-max-width-and-max-h.patch b/target/linux/at91/patches-5.10/160-media-atmel-atmel-isc-specialize-max-width-and-max-h.patch
new file mode 100644
index 0000000000..1508f8485f
--- /dev/null
+++ b/target/linux/at91/patches-5.10/160-media-atmel-atmel-isc-specialize-max-width-and-max-h.patch
@@ -0,0 +1,140 @@
+From b51819e17260af2ecc152b7dcd61e63bcaa35edf Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:02 +0200
+Subject: [PATCH 160/247] media: atmel: atmel-isc: specialize max width and max
+ height
+
+Move the max width and max height constants to the product specific driver
+and have them in the device struct.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 28 +++++++++----------
+ drivers/media/platform/atmel/atmel-isc.h | 9 ++++--
+ .../media/platform/atmel/atmel-sama5d2-isc.c | 7 +++--
+ 3 files changed, 25 insertions(+), 19 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 02f1d1c6b06e..ed0048e79f3b 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -1216,8 +1216,8 @@ static void isc_try_fse(struct isc_device *isc,
+ * just use the maximum ISC can receive.
+ */
+ if (ret) {
+- pad_cfg->try_crop.width = ISC_MAX_SUPPORT_WIDTH;
+- pad_cfg->try_crop.height = ISC_MAX_SUPPORT_HEIGHT;
++ pad_cfg->try_crop.width = isc->max_width;
++ pad_cfg->try_crop.height = isc->max_height;
+ } else {
+ pad_cfg->try_crop.width = fse.max_width;
+ pad_cfg->try_crop.height = fse.max_height;
+@@ -1294,10 +1294,10 @@ static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f,
+ isc->try_config.sd_format = sd_fmt;
+
+ /* Limit to Atmel ISC hardware capabilities */
+- if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
+- pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
+- if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
+- pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
++ if (pixfmt->width > isc->max_width)
++ pixfmt->width = isc->max_width;
++ if (pixfmt->height > isc->max_height)
++ pixfmt->height = isc->max_height;
+
+ /*
+ * The mbus format is the one the subdev outputs.
+@@ -1339,10 +1339,10 @@ static int isc_try_fmt(struct isc_device *isc, struct v4l2_format *f,
+ v4l2_fill_pix_format(pixfmt, &format.format);
+
+ /* Limit to Atmel ISC hardware capabilities */
+- if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
+- pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
+- if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
+- pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
++ if (pixfmt->width > isc->max_width)
++ pixfmt->width = isc->max_width;
++ if (pixfmt->height > isc->max_height)
++ pixfmt->height = isc->max_height;
+
+ pixfmt->field = V4L2_FIELD_NONE;
+ pixfmt->bytesperline = (pixfmt->width * isc->try_config.bpp) >> 3;
+@@ -1380,10 +1380,10 @@ static int isc_set_fmt(struct isc_device *isc, struct v4l2_format *f)
+ return ret;
+
+ /* Limit to Atmel ISC hardware capabilities */
+- if (pixfmt->width > ISC_MAX_SUPPORT_WIDTH)
+- pixfmt->width = ISC_MAX_SUPPORT_WIDTH;
+- if (pixfmt->height > ISC_MAX_SUPPORT_HEIGHT)
+- pixfmt->height = ISC_MAX_SUPPORT_HEIGHT;
++ if (f->fmt.pix.width > isc->max_width)
++ f->fmt.pix.width = isc->max_width;
++ if (f->fmt.pix.height > isc->max_height)
++ f->fmt.pix.height = isc->max_height;
+
+ isc->fmt = *f;
+
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index bb43d3a93052..f208fb691ac9 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -10,9 +10,6 @@
+ */
+ #ifndef _ATMEL_ISC_H_
+
+-#define ISC_MAX_SUPPORT_WIDTH 2592
+-#define ISC_MAX_SUPPORT_HEIGHT 1944
+-
+ #define ISC_CLK_MAX_DIV 255
+
+ enum isc_clk_id {
+@@ -190,6 +187,9 @@ struct isc_ctrls {
+ * @gamma_table: pointer to the table with gamma values, has
+ * gamma_max sets of GAMMA_ENTRIES entries each
+ * @gamma_max: maximum number of sets of inside the gamma_table
++ *
++ * @max_width: maximum frame width, dependent on the internal RAM
++ * @max_height: maximum frame height, dependent on the internal RAM
+ */
+ struct isc_device {
+ struct regmap *regmap;
+@@ -253,6 +253,9 @@ struct isc_device {
+ /* pointer to the defined gamma table */
+ const u32 (*gamma_table)[GAMMA_ENTRIES];
+ u32 gamma_max;
++
++ u32 max_width;
++ u32 max_height;
+ };
+
+ extern struct isc_format formats_list[];
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index cba6e6c8810b..39fc8d4f9bdc 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -49,8 +49,8 @@
+ #include "atmel-isc-regs.h"
+ #include "atmel-isc.h"
+
+-#define ISC_MAX_SUPPORT_WIDTH 2592
+-#define ISC_MAX_SUPPORT_HEIGHT 1944
++#define ISC_SAMA5D2_MAX_SUPPORT_WIDTH 2592
++#define ISC_SAMA5D2_MAX_SUPPORT_HEIGHT 1944
+
+ #define ISC_CLK_MAX_DIV 255
+
+@@ -216,6 +216,9 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->gamma_table = isc_sama5d2_gamma_table;
+ isc->gamma_max = 2;
+
++ isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH;
++ isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT;
++
+ ret = isc_pipeline_init(isc);
+ if (ret)
+ return ret;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/161-media-atmel-atmel-isc-specialize-dma-cfg.patch b/target/linux/at91/patches-5.10/161-media-atmel-atmel-isc-specialize-dma-cfg.patch
new file mode 100644
index 0000000000..4b7a974e4f
--- /dev/null
+++ b/target/linux/at91/patches-5.10/161-media-atmel-atmel-isc-specialize-dma-cfg.patch
@@ -0,0 +1,69 @@
+From c42305f52560a1be6fc25a2f23579c7b323de654 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:03 +0200
+Subject: [PATCH 161/247] media: atmel: atmel-isc: specialize dma cfg
+
+The dma configuration (DCFG) is specific to the product.
+Move this configuration in the product specific driver, and add the
+field inside the driver struct.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 3 +--
+ drivers/media/platform/atmel/atmel-isc.h | 2 ++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 3 +++
+ 3 files changed, 6 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index ed0048e79f3b..07ba439eb7e9 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -724,8 +724,7 @@ static int isc_configure(struct isc_device *isc)
+ rlp_mode = isc->config.rlp_cfg_mode;
+ pipeline = isc->config.bits_pipeline;
+
+- dcfg = isc->config.dcfg_imode |
+- ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
++ dcfg = isc->config.dcfg_imode | isc->dcfg;
+
+ pfe_cfg0 |= subdev->pfe_cfg0 | ISC_PFE_CFG0_MODE_PROGRESSIVE;
+ mask = ISC_PFE_CFG0_BPS_MASK | ISC_PFE_CFG0_HPOL_LOW |
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index f208fb691ac9..88ec4268de11 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -149,6 +149,7 @@ struct isc_ctrls {
+ * @hclock: Hclock clock input (refer datasheet)
+ * @ispck: iscpck clock (refer datasheet)
+ * @isc_clks: ISC clocks
++ * @dcfg: DMA master configuration, architecture dependent
+ *
+ * @dev: Registered device driver
+ * @v4l2_dev: v4l2 registered device
+@@ -196,6 +197,7 @@ struct isc_device {
+ struct clk *hclock;
+ struct clk *ispck;
+ struct isc_clk isc_clks[2];
++ u32 dcfg;
+
+ struct device *dev;
+ struct v4l2_device v4l2_dev;
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index 39fc8d4f9bdc..12edeb07b618 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -219,6 +219,9 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH;
+ isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT;
+
++ /* sama5d2-isc - 8 bits per beat */
++ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
++
+ ret = isc_pipeline_init(isc);
+ if (ret)
+ return ret;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/162-media-atmel-atmel-isc-extract-CSC-submodule-config-i.patch b/target/linux/at91/patches-5.10/162-media-atmel-atmel-isc-extract-CSC-submodule-config-i.patch
new file mode 100644
index 0000000000..da382d3587
--- /dev/null
+++ b/target/linux/at91/patches-5.10/162-media-atmel-atmel-isc-extract-CSC-submodule-config-i.patch
@@ -0,0 +1,103 @@
+From 6ccda3cf6a102ac4f6e21386d0dd0fedfb066525 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:04 +0200
+Subject: [PATCH 162/247] media: atmel: atmel-isc: extract CSC submodule config
+ into separate function
+
+The CSC submodule is a part of the atmel-isc pipeline, and stands for
+Color Space Conversion. It is used to apply a matrix transformation to
+RGB pixels to convert them to the YUV components.
+The CSC submodule should be initialized in the product specific driver
+as it's product specific. Other products can implement it differently.
+
+[hverkuil: made isc_sama5d2_config_csc static]
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 8 +-------
+ drivers/media/platform/atmel/atmel-isc.h | 7 +++++++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 15 +++++++++++++++
+ 3 files changed, 23 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 07ba439eb7e9..6c709f6a408c 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -654,13 +654,7 @@ static void isc_set_pipeline(struct isc_device *isc, u32 pipeline)
+ regmap_bulk_write(regmap, ISC_GAM_GENTRY, gamma, GAMMA_ENTRIES);
+ regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES);
+
+- /* Convert RGB to YUV */
+- regmap_write(regmap, ISC_CSC_YR_YG, 0x42 | (0x81 << 16));
+- regmap_write(regmap, ISC_CSC_YB_OY, 0x19 | (0x10 << 16));
+- regmap_write(regmap, ISC_CSC_CBR_CBG, 0xFDA | (0xFB6 << 16));
+- regmap_write(regmap, ISC_CSC_CBB_OCB, 0x70 | (0x80 << 16));
+- regmap_write(regmap, ISC_CSC_CRR_CRG, 0x70 | (0xFA2 << 16));
+- regmap_write(regmap, ISC_CSC_CRB_OCR, 0xFEE | (0x80 << 16));
++ isc->config_csc(isc);
+
+ regmap_write(regmap, ISC_CBC_BRIGHT, ctrls->brightness);
+ regmap_write(regmap, ISC_CBC_CONTRAST, ctrls->contrast);
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 88ec4268de11..ebdb9ed791a7 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -191,6 +191,9 @@ struct isc_ctrls {
+ *
+ * @max_width: maximum frame width, dependent on the internal RAM
+ * @max_height: maximum frame height, dependent on the internal RAM
++ *
++ * @config_csc: pointer to a function that initializes product
++ * specific CSC module
+ */
+ struct isc_device {
+ struct regmap *regmap;
+@@ -258,6 +261,10 @@ struct isc_device {
+
+ u32 max_width;
+ u32 max_height;
++
++ struct {
++ void (*config_csc)(struct isc_device *isc);
++ };
+ };
+
+ extern struct isc_format formats_list[];
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index 12edeb07b618..19d0f750636c 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -54,6 +54,19 @@
+
+ #define ISC_CLK_MAX_DIV 255
+
++static void isc_sama5d2_config_csc(struct isc_device *isc)
++{
++ struct regmap *regmap = isc->regmap;
++
++ /* Convert RGB to YUV */
++ regmap_write(regmap, ISC_CSC_YR_YG, 0x42 | (0x81 << 16));
++ regmap_write(regmap, ISC_CSC_YB_OY, 0x19 | (0x10 << 16));
++ regmap_write(regmap, ISC_CSC_CBR_CBG, 0xFDA | (0xFB6 << 16));
++ regmap_write(regmap, ISC_CSC_CBB_OCB, 0x70 | (0x80 << 16));
++ regmap_write(regmap, ISC_CSC_CRR_CRG, 0x70 | (0xFA2 << 16));
++ regmap_write(regmap, ISC_CSC_CRB_OCR, 0xFEE | (0x80 << 16));
++}
++
+ /* Gamma table with gamma 1/2.2 */
+ static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
+ /* 0 --> gamma 1/1.8 */
+@@ -219,6 +232,8 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH;
+ isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT;
+
++ isc->config_csc = isc_sama5d2_config_csc;
++
+ /* sama5d2-isc - 8 bits per beat */
+ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/163-media-atmel-atmel-isc-base-add-id-to-clock-debug-mes.patch b/target/linux/at91/patches-5.10/163-media-atmel-atmel-isc-base-add-id-to-clock-debug-mes.patch
new file mode 100644
index 0000000000..f4139debc1
--- /dev/null
+++ b/target/linux/at91/patches-5.10/163-media-atmel-atmel-isc-base-add-id-to-clock-debug-mes.patch
@@ -0,0 +1,33 @@
+From 19dd7c72c6c457c147133a7dad8ab28d35538f99 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:05 +0200
+Subject: [PATCH 163/247] media: atmel: atmel-isc-base: add id to clock debug
+ message
+
+Add the clock id to the debug message regarding clock setup
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 6c709f6a408c..f9190fccb482 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -281,8 +281,8 @@ static int isc_clk_enable(struct clk_hw *hw)
+ unsigned long flags;
+ unsigned int status;
+
+- dev_dbg(isc_clk->dev, "ISC CLK: %s, div = %d, parent id = %d\n",
+- __func__, isc_clk->div, isc_clk->parent_id);
++ dev_dbg(isc_clk->dev, "ISC CLK: %s, id = %d, div = %d, parent id = %d\n",
++ __func__, id, isc_clk->div, isc_clk->parent_id);
+
+ spin_lock_irqsave(&isc_clk->lock, flags);
+ regmap_update_bits(regmap, ISC_CLKCFG,
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/164-media-atmel-atmel-isc-create-register-offsets-struct.patch b/target/linux/at91/patches-5.10/164-media-atmel-atmel-isc-create-register-offsets-struct.patch
new file mode 100644
index 0000000000..7834983d14
--- /dev/null
+++ b/target/linux/at91/patches-5.10/164-media-atmel-atmel-isc-create-register-offsets-struct.patch
@@ -0,0 +1,126 @@
+From 7a1b082cd81a2496e2687cee7ea1ef04a3020f48 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:06 +0200
+Subject: [PATCH 164/247] media: atmel: atmel-isc: create register offsets
+ struct
+
+Create a struct that holds register offsets that are product specific.
+Add initially the CSC register.
+This allows each product that contains a variant of the ISC to add their
+own register offset.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 2 +-
+ drivers/media/platform/atmel/atmel-isc-regs.h | 3 +++
+ drivers/media/platform/atmel/atmel-isc.h | 12 +++++++++++
+ .../media/platform/atmel/atmel-sama5d2-isc.c | 20 +++++++++++++------
+ 4 files changed, 30 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index f9190fccb482..18136e58a754 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -2326,7 +2326,7 @@ int isc_pipeline_init(struct isc_device *isc)
+ REG_FIELD(ISC_GAM_CTRL, 1, 1),
+ REG_FIELD(ISC_GAM_CTRL, 2, 2),
+ REG_FIELD(ISC_GAM_CTRL, 3, 3),
+- REG_FIELD(ISC_CSC_CTRL, 0, 0),
++ REG_FIELD(ISC_CSC_CTRL + isc->offsets.csc, 0, 0),
+ REG_FIELD(ISC_CBC_CTRL, 0, 0),
+ REG_FIELD(ISC_SUB422_CTRL, 0, 0),
+ REG_FIELD(ISC_SUB420_CTRL, 0, 0),
+diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
+index f1e160ed4351..5a65600c5f88 100644
+--- a/drivers/media/platform/atmel/atmel-isc-regs.h
++++ b/drivers/media/platform/atmel/atmel-isc-regs.h
+@@ -153,6 +153,9 @@
+ /* ISC_Gamma Correction Green Entry Register */
+ #define ISC_GAM_RENTRY 0x00000298
+
++/* Offset for CSC register specific to sama5d2 product */
++#define ISC_SAMA5D2_CSC_OFFSET 0
++
+ /* Color Space Conversion Control Register */
+ #define ISC_CSC_CTRL 0x00000398
+
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index ebdb9ed791a7..db6b4d469dff 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -143,6 +143,14 @@ struct isc_ctrls {
+
+ #define ISC_PIPE_LINE_NODE_NUM 11
+
++/*
++ * struct isc_reg_offsets - ISC device register offsets
++ * @csc: Offset for the CSC register
++ */
++struct isc_reg_offsets {
++ u32 csc;
++};
++
+ /*
+ * struct isc_device - ISC device driver data/config struct
+ * @regmap: Register map
+@@ -194,6 +202,8 @@ struct isc_ctrls {
+ *
+ * @config_csc: pointer to a function that initializes product
+ * specific CSC module
++ *
++ * @offsets: struct holding the product specific register offsets
+ */
+ struct isc_device {
+ struct regmap *regmap;
+@@ -265,6 +275,8 @@ struct isc_device {
+ struct {
+ void (*config_csc)(struct isc_device *isc);
+ };
++
++ struct isc_reg_offsets offsets;
+ };
+
+ extern struct isc_format formats_list[];
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index 19d0f750636c..2ad6227aa2f5 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -59,12 +59,18 @@ static void isc_sama5d2_config_csc(struct isc_device *isc)
+ struct regmap *regmap = isc->regmap;
+
+ /* Convert RGB to YUV */
+- regmap_write(regmap, ISC_CSC_YR_YG, 0x42 | (0x81 << 16));
+- regmap_write(regmap, ISC_CSC_YB_OY, 0x19 | (0x10 << 16));
+- regmap_write(regmap, ISC_CSC_CBR_CBG, 0xFDA | (0xFB6 << 16));
+- regmap_write(regmap, ISC_CSC_CBB_OCB, 0x70 | (0x80 << 16));
+- regmap_write(regmap, ISC_CSC_CRR_CRG, 0x70 | (0xFA2 << 16));
+- regmap_write(regmap, ISC_CSC_CRB_OCR, 0xFEE | (0x80 << 16));
++ regmap_write(regmap, ISC_CSC_YR_YG + isc->offsets.csc,
++ 0x42 | (0x81 << 16));
++ regmap_write(regmap, ISC_CSC_YB_OY + isc->offsets.csc,
++ 0x19 | (0x10 << 16));
++ regmap_write(regmap, ISC_CSC_CBR_CBG + isc->offsets.csc,
++ 0xFDA | (0xFB6 << 16));
++ regmap_write(regmap, ISC_CSC_CBB_OCB + isc->offsets.csc,
++ 0x70 | (0x80 << 16));
++ regmap_write(regmap, ISC_CSC_CRR_CRG + isc->offsets.csc,
++ 0x70 | (0xFA2 << 16));
++ regmap_write(regmap, ISC_CSC_CRB_OCR + isc->offsets.csc,
++ 0xFEE | (0x80 << 16));
+ }
+
+ /* Gamma table with gamma 1/2.2 */
+@@ -234,6 +240,8 @@ static int atmel_isc_probe(struct platform_device *pdev)
+
+ isc->config_csc = isc_sama5d2_config_csc;
+
++ isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
++
+ /* sama5d2-isc - 8 bits per beat */
+ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/165-media-atmel-atmel-isc-extract-CBC-submodule-config-i.patch b/target/linux/at91/patches-5.10/165-media-atmel-atmel-isc-extract-CBC-submodule-config-i.patch
new file mode 100644
index 0000000000..f9d026394e
--- /dev/null
+++ b/target/linux/at91/patches-5.10/165-media-atmel-atmel-isc-extract-CBC-submodule-config-i.patch
@@ -0,0 +1,89 @@
+From aa31e58d80d233385fa3b972e6b85f293e2a9093 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:07 +0200
+Subject: [PATCH 165/247] media: atmel: atmel-isc: extract CBC submodule config
+ into separate function
+
+The CBC submodule is a part of the atmel-isc pipeline, and stands for
+Contrast Brightness Control. It is used to apply gains and offsets to the
+luma (Y) and chroma (U, V) components of the YUV elements.
+The CBC submodule should be initialized in the product specific driver
+as it's product specific. Other products can implement it differently
+
+[hverkuil: made isc_sama5d2_config_cbc static]
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 4 +---
+ drivers/media/platform/atmel/atmel-isc.h | 3 +++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 9 +++++++++
+ 3 files changed, 13 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 18136e58a754..865410e10e70 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -655,9 +655,7 @@ static void isc_set_pipeline(struct isc_device *isc, u32 pipeline)
+ regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES);
+
+ isc->config_csc(isc);
+-
+- regmap_write(regmap, ISC_CBC_BRIGHT, ctrls->brightness);
+- regmap_write(regmap, ISC_CBC_CONTRAST, ctrls->contrast);
++ isc->config_cbc(isc);
+ }
+
+ static int isc_update_profile(struct isc_device *isc)
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index db6b4d469dff..65c3059afb8e 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -202,6 +202,8 @@ struct isc_reg_offsets {
+ *
+ * @config_csc: pointer to a function that initializes product
+ * specific CSC module
++ * @config_cbc: pointer to a function that initializes product
++ * specific CBC module
+ *
+ * @offsets: struct holding the product specific register offsets
+ */
+@@ -274,6 +276,7 @@ struct isc_device {
+
+ struct {
+ void (*config_csc)(struct isc_device *isc);
++ void (*config_cbc)(struct isc_device *isc);
+ };
+
+ struct isc_reg_offsets offsets;
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index 2ad6227aa2f5..770d62b483d0 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -73,6 +73,14 @@ static void isc_sama5d2_config_csc(struct isc_device *isc)
+ 0xFEE | (0x80 << 16));
+ }
+
++static void isc_sama5d2_config_cbc(struct isc_device *isc)
++{
++ struct regmap *regmap = isc->regmap;
++
++ regmap_write(regmap, ISC_CBC_BRIGHT, isc->ctrls.brightness);
++ regmap_write(regmap, ISC_CBC_CONTRAST, isc->ctrls.contrast);
++}
++
+ /* Gamma table with gamma 1/2.2 */
+ static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
+ /* 0 --> gamma 1/1.8 */
+@@ -239,6 +247,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT;
+
+ isc->config_csc = isc_sama5d2_config_csc;
++ isc->config_cbc = isc_sama5d2_config_cbc;
+
+ isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/166-media-atmel-atmel-isc-add-CBC-to-the-reg-offsets-str.patch b/target/linux/at91/patches-5.10/166-media-atmel-atmel-isc-add-CBC-to-the-reg-offsets-str.patch
new file mode 100644
index 0000000000..46482f0397
--- /dev/null
+++ b/target/linux/at91/patches-5.10/166-media-atmel-atmel-isc-add-CBC-to-the-reg-offsets-str.patch
@@ -0,0 +1,93 @@
+From 52e4b779ae1af3e322d0c673375dcd51315739d4 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:08 +0200
+Subject: [PATCH 166/247] media: atmel: atmel-isc: add CBC to the reg offsets
+ struct
+
+The CBC submodule is a part of the atmel-isc pipeline, and stands for
+Contrast Brightness Control. It is used to apply gains and offsets to the
+luma (Y) and chroma (U, V) components of the YUV elements.
+Add cbc to the reg offsets struct. This will allow different products
+to have a different reg offset for this particular module.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 2 +-
+ drivers/media/platform/atmel/atmel-isc-regs.h | 3 +++
+ drivers/media/platform/atmel/atmel-isc.h | 2 ++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 7 +++++--
+ 4 files changed, 11 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 865410e10e70..b7728914fda8 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -2325,7 +2325,7 @@ int isc_pipeline_init(struct isc_device *isc)
+ REG_FIELD(ISC_GAM_CTRL, 2, 2),
+ REG_FIELD(ISC_GAM_CTRL, 3, 3),
+ REG_FIELD(ISC_CSC_CTRL + isc->offsets.csc, 0, 0),
+- REG_FIELD(ISC_CBC_CTRL, 0, 0),
++ REG_FIELD(ISC_CBC_CTRL + isc->offsets.cbc, 0, 0),
+ REG_FIELD(ISC_SUB422_CTRL, 0, 0),
+ REG_FIELD(ISC_SUB420_CTRL, 0, 0),
+ };
+diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
+index 5a65600c5f88..a5e2fe01ba9f 100644
+--- a/drivers/media/platform/atmel/atmel-isc-regs.h
++++ b/drivers/media/platform/atmel/atmel-isc-regs.h
+@@ -177,6 +177,9 @@
+ /* Color Space Conversion CRB OCR Register */
+ #define ISC_CSC_CRB_OCR 0x000003b0
+
++/* Offset for CBC register specific to sama5d2 product */
++#define ISC_SAMA5D2_CBC_OFFSET 0
++
+ /* Contrast And Brightness Control Register */
+ #define ISC_CBC_CTRL 0x000003b4
+
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 65c3059afb8e..d8b4b1959b94 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -146,9 +146,11 @@ struct isc_ctrls {
+ /*
+ * struct isc_reg_offsets - ISC device register offsets
+ * @csc: Offset for the CSC register
++ * @cbc: Offset for the CBC register
+ */
+ struct isc_reg_offsets {
+ u32 csc;
++ u32 cbc;
+ };
+
+ /*
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index 770d62b483d0..bb9362093efe 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -77,8 +77,10 @@ static void isc_sama5d2_config_cbc(struct isc_device *isc)
+ {
+ struct regmap *regmap = isc->regmap;
+
+- regmap_write(regmap, ISC_CBC_BRIGHT, isc->ctrls.brightness);
+- regmap_write(regmap, ISC_CBC_CONTRAST, isc->ctrls.contrast);
++ regmap_write(regmap, ISC_CBC_BRIGHT + isc->offsets.cbc,
++ isc->ctrls.brightness);
++ regmap_write(regmap, ISC_CBC_CONTRAST + isc->offsets.cbc,
++ isc->ctrls.contrast);
+ }
+
+ /* Gamma table with gamma 1/2.2 */
+@@ -250,6 +252,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->config_cbc = isc_sama5d2_config_cbc;
+
+ isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
++ isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET;
+
+ /* sama5d2-isc - 8 bits per beat */
+ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/167-media-atmel-atmel-isc-add-SUB422-and-SUB420-to-regis.patch b/target/linux/at91/patches-5.10/167-media-atmel-atmel-isc-add-SUB422-and-SUB420-to-regis.patch
new file mode 100644
index 0000000000..d4d6f2ea45
--- /dev/null
+++ b/target/linux/at91/patches-5.10/167-media-atmel-atmel-isc-add-SUB422-and-SUB420-to-regis.patch
@@ -0,0 +1,91 @@
+From aebb741058a63c3493f4139d11d6f290d5691e9b Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:09 +0200
+Subject: [PATCH 167/247] media: atmel: atmel-isc: add SUB422 and SUB420 to
+ register offsets
+
+The SUB submodules are a part of the atmel-isc pipeline, and stand for
+Subsampling. They are used to subsample the original YUV 4:4:4 pixel ratio
+aspect to either 4:2:2 or 4:2:0.
+Add sub420 and sub422 to the reg offsets struct.
+This will allow different products to have a different reg offset for these
+particular modules.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 4 ++--
+ drivers/media/platform/atmel/atmel-isc-regs.h | 4 ++++
+ drivers/media/platform/atmel/atmel-isc.h | 4 ++++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 2 ++
+ 4 files changed, 12 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index b7728914fda8..b398cdfdc2c9 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -2326,8 +2326,8 @@ int isc_pipeline_init(struct isc_device *isc)
+ REG_FIELD(ISC_GAM_CTRL, 3, 3),
+ REG_FIELD(ISC_CSC_CTRL + isc->offsets.csc, 0, 0),
+ REG_FIELD(ISC_CBC_CTRL + isc->offsets.cbc, 0, 0),
+- REG_FIELD(ISC_SUB422_CTRL, 0, 0),
+- REG_FIELD(ISC_SUB420_CTRL, 0, 0),
++ REG_FIELD(ISC_SUB422_CTRL + isc->offsets.sub422, 0, 0),
++ REG_FIELD(ISC_SUB420_CTRL + isc->offsets.sub420, 0, 0),
+ };
+
+ for (i = 0; i < ISC_PIPE_LINE_NODE_NUM; i++) {
+diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
+index a5e2fe01ba9f..04839def6ef6 100644
+--- a/drivers/media/platform/atmel/atmel-isc-regs.h
++++ b/drivers/media/platform/atmel/atmel-isc-regs.h
+@@ -194,9 +194,13 @@
+ #define ISC_CBC_CONTRAST 0x000003c0
+ #define ISC_CBC_CONTRAST_MASK GENMASK(11, 0)
+
++/* Offset for SUB422 register specific to sama5d2 product */
++#define ISC_SAMA5D2_SUB422_OFFSET 0
+ /* Subsampling 4:4:4 to 4:2:2 Control Register */
+ #define ISC_SUB422_CTRL 0x000003c4
+
++/* Offset for SUB420 register specific to sama5d2 product */
++#define ISC_SAMA5D2_SUB420_OFFSET 0
+ /* Subsampling 4:2:2 to 4:2:0 Control Register */
+ #define ISC_SUB420_CTRL 0x000003cc
+
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index d8b4b1959b94..9eb85540d89d 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -147,10 +147,14 @@ struct isc_ctrls {
+ * struct isc_reg_offsets - ISC device register offsets
+ * @csc: Offset for the CSC register
+ * @cbc: Offset for the CBC register
++ * @sub422: Offset for the SUB422 register
++ * @sub420: Offset for the SUB420 register
+ */
+ struct isc_reg_offsets {
+ u32 csc;
+ u32 cbc;
++ u32 sub422;
++ u32 sub420;
+ };
+
+ /*
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index bb9362093efe..57ea1ae50c44 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -253,6 +253,8 @@ static int atmel_isc_probe(struct platform_device *pdev)
+
+ isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
+ isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET;
++ isc->offsets.sub422 = ISC_SAMA5D2_SUB422_OFFSET;
++ isc->offsets.sub420 = ISC_SAMA5D2_SUB420_OFFSET;
+
+ /* sama5d2-isc - 8 bits per beat */
+ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/168-media-atmel-atmel-isc-add-RLP-to-register-offsets.patch b/target/linux/at91/patches-5.10/168-media-atmel-atmel-isc-add-RLP-to-register-offsets.patch
new file mode 100644
index 0000000000..a27ef80567
--- /dev/null
+++ b/target/linux/at91/patches-5.10/168-media-atmel-atmel-isc-add-RLP-to-register-offsets.patch
@@ -0,0 +1,85 @@
+From b432a8b0fc88de5b49236482053d8d372c68ee55 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:10 +0200
+Subject: [PATCH 168/247] media: atmel: atmel-isc: add RLP to register offsets
+
+The RLP submodule is a part of the atmel-isc pipeline, and stands for
+Rounding,Limiting and Packaging. It used to extract specific data from the
+ISC pipeline. For example if we want to output greyscale 8 bit, we would
+use limiting to 8 bits, and packaging to Luma component only.
+Add rlp to the reg offsets struct.
+This will allow different products to have a different reg offset for this
+particular module.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 4 ++--
+ drivers/media/platform/atmel/atmel-isc-regs.h | 2 ++
+ drivers/media/platform/atmel/atmel-isc.h | 2 ++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 1 +
+ 4 files changed, 7 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index b398cdfdc2c9..25c90b821067 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -726,8 +726,8 @@ static int isc_configure(struct isc_device *isc)
+
+ regmap_update_bits(regmap, ISC_PFE_CFG0, mask, pfe_cfg0);
+
+- regmap_update_bits(regmap, ISC_RLP_CFG, ISC_RLP_CFG_MODE_MASK,
+- rlp_mode);
++ regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp,
++ ISC_RLP_CFG_MODE_MASK, rlp_mode);
+
+ regmap_write(regmap, ISC_DCFG, dcfg);
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
+index 04839def6ef6..2205484e04fc 100644
+--- a/drivers/media/platform/atmel/atmel-isc-regs.h
++++ b/drivers/media/platform/atmel/atmel-isc-regs.h
+@@ -204,6 +204,8 @@
+ /* Subsampling 4:2:2 to 4:2:0 Control Register */
+ #define ISC_SUB420_CTRL 0x000003cc
+
++/* Offset for RLP register specific to sama5d2 product */
++#define ISC_SAMA5D2_RLP_OFFSET 0
+ /* Rounding, Limiting and Packing Configuration Register */
+ #define ISC_RLP_CFG 0x000003d0
+
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 9eb85540d89d..4a5293c66f49 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -149,12 +149,14 @@ struct isc_ctrls {
+ * @cbc: Offset for the CBC register
+ * @sub422: Offset for the SUB422 register
+ * @sub420: Offset for the SUB420 register
++ * @rlp: Offset for the RLP register
+ */
+ struct isc_reg_offsets {
+ u32 csc;
+ u32 cbc;
+ u32 sub422;
+ u32 sub420;
++ u32 rlp;
+ };
+
+ /*
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index 57ea1ae50c44..b01b5b9f229b 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -255,6 +255,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET;
+ isc->offsets.sub422 = ISC_SAMA5D2_SUB422_OFFSET;
+ isc->offsets.sub420 = ISC_SAMA5D2_SUB420_OFFSET;
++ isc->offsets.rlp = ISC_SAMA5D2_RLP_OFFSET;
+
+ /* sama5d2-isc - 8 bits per beat */
+ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/169-media-atmel-atmel-isc-add-HIS-to-register-offsets.patch b/target/linux/at91/patches-5.10/169-media-atmel-atmel-isc-add-HIS-to-register-offsets.patch
new file mode 100644
index 0000000000..d818ccdaa6
--- /dev/null
+++ b/target/linux/at91/patches-5.10/169-media-atmel-atmel-isc-add-HIS-to-register-offsets.patch
@@ -0,0 +1,110 @@
+From 8c19aa14b8303a0e7c4bae42f3f00f9a2a65b0db Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:11 +0200
+Subject: [PATCH 169/247] media: atmel: atmel-isc: add HIS to register offsets
+
+The HIS submodule is a part of the atmel-isc pipeline, and stands for
+Histogram. This module performs a color histogram that can be read and used
+by the main processor.
+Add his to the reg offsets struct.
+This will allow different products to have a different reg offset for this
+particular module.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 11 +++++++----
+ drivers/media/platform/atmel/atmel-isc-regs.h | 2 ++
+ drivers/media/platform/atmel/atmel-isc.h | 2 ++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 1 +
+ 4 files changed, 12 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 25c90b821067..5c95aa45cf6c 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -686,12 +686,13 @@ static void isc_set_histogram(struct isc_device *isc, bool enable)
+ struct isc_ctrls *ctrls = &isc->ctrls;
+
+ if (enable) {
+- regmap_write(regmap, ISC_HIS_CFG,
++ regmap_write(regmap, ISC_HIS_CFG + isc->offsets.his,
+ ISC_HIS_CFG_MODE_GR |
+ (isc->config.sd_format->cfa_baycfg
+ << ISC_HIS_CFG_BAYSEL_SHIFT) |
+ ISC_HIS_CFG_RAR);
+- regmap_write(regmap, ISC_HIS_CTRL, ISC_HIS_CTRL_EN);
++ regmap_write(regmap, ISC_HIS_CTRL + isc->offsets.his,
++ ISC_HIS_CTRL_EN);
+ regmap_write(regmap, ISC_INTEN, ISC_INT_HISDONE);
+ ctrls->hist_id = ISC_HIS_CFG_MODE_GR;
+ isc_update_profile(isc);
+@@ -700,7 +701,8 @@ static void isc_set_histogram(struct isc_device *isc, bool enable)
+ ctrls->hist_stat = HIST_ENABLED;
+ } else {
+ regmap_write(regmap, ISC_INTDIS, ISC_INT_HISDONE);
+- regmap_write(regmap, ISC_HIS_CTRL, ISC_HIS_CTRL_DIS);
++ regmap_write(regmap, ISC_HIS_CTRL + isc->offsets.his,
++ ISC_HIS_CTRL_DIS);
+
+ ctrls->hist_stat = HIST_DISABLED;
+ }
+@@ -1836,7 +1838,8 @@ static void isc_awb_work(struct work_struct *w)
+ ctrls->awb = ISC_WB_NONE;
+ }
+ }
+- regmap_write(regmap, ISC_HIS_CFG, hist_id | baysel | ISC_HIS_CFG_RAR);
++ regmap_write(regmap, ISC_HIS_CFG + isc->offsets.his,
++ hist_id | baysel | ISC_HIS_CFG_RAR);
+ isc_update_profile(isc);
+ /* if awb has been disabled, we don't need to start another histogram */
+ if (ctrls->awb)
+diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
+index 2205484e04fc..0ab280ab59ec 100644
+--- a/drivers/media/platform/atmel/atmel-isc-regs.h
++++ b/drivers/media/platform/atmel/atmel-isc-regs.h
+@@ -224,6 +224,8 @@
+ #define ISC_RLP_CFG_MODE_YYCC_LIMITED 0xc
+ #define ISC_RLP_CFG_MODE_MASK GENMASK(3, 0)
+
++/* Offset for HIS register specific to sama5d2 product */
++#define ISC_SAMA5D2_HIS_OFFSET 0
+ /* Histogram Control Register */
+ #define ISC_HIS_CTRL 0x000003d4
+
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 4a5293c66f49..97ec4c58297e 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -150,6 +150,7 @@ struct isc_ctrls {
+ * @sub422: Offset for the SUB422 register
+ * @sub420: Offset for the SUB420 register
+ * @rlp: Offset for the RLP register
++ * @his: Offset for the HIS related registers
+ */
+ struct isc_reg_offsets {
+ u32 csc;
+@@ -157,6 +158,7 @@ struct isc_reg_offsets {
+ u32 sub422;
+ u32 sub420;
+ u32 rlp;
++ u32 his;
+ };
+
+ /*
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index b01b5b9f229b..db93cb76c08b 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -256,6 +256,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->offsets.sub422 = ISC_SAMA5D2_SUB422_OFFSET;
+ isc->offsets.sub420 = ISC_SAMA5D2_SUB420_OFFSET;
+ isc->offsets.rlp = ISC_SAMA5D2_RLP_OFFSET;
++ isc->offsets.his = ISC_SAMA5D2_HIS_OFFSET;
+
+ /* sama5d2-isc - 8 bits per beat */
+ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/170-media-atmel-atmel-isc-add-DMA-to-register-offsets.patch b/target/linux/at91/patches-5.10/170-media-atmel-atmel-isc-add-DMA-to-register-offsets.patch
new file mode 100644
index 0000000000..92f6f3ead6
--- /dev/null
+++ b/target/linux/at91/patches-5.10/170-media-atmel-atmel-isc-add-DMA-to-register-offsets.patch
@@ -0,0 +1,121 @@
+From 7173e54070a9b530c8c16e0a507be71385133abd Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:12 +0200
+Subject: [PATCH 170/247] media: atmel: atmel-isc: add DMA to register offsets
+
+The DMA submodule is a part of the atmel-isc pipeline, and stands for
+Direct Memory Access. It acts like a master on the AXI bus of the SoC, and
+can directly write the RAM area with the pixel data from the ISC internal
+sram.
+Add dma to the reg offsets struct.
+This will allow different products to have a different reg offset for this
+particular module.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 19 ++++++++++++-------
+ drivers/media/platform/atmel/atmel-isc-regs.h | 3 +++
+ drivers/media/platform/atmel/atmel-isc.h | 2 ++
+ .../media/platform/atmel/atmel-sama5d2-isc.c | 1 +
+ 4 files changed, 18 insertions(+), 7 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 5c95aa45cf6c..e010429fc44d 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -601,16 +601,20 @@ static void isc_start_dma(struct isc_device *isc)
+ ISC_PFE_CFG0_COLEN | ISC_PFE_CFG0_ROWEN);
+
+ addr0 = vb2_dma_contig_plane_dma_addr(&isc->cur_frm->vb.vb2_buf, 0);
+- regmap_write(regmap, ISC_DAD0, addr0);
++ regmap_write(regmap, ISC_DAD0 + isc->offsets.dma, addr0);
+
+ switch (isc->config.fourcc) {
+ case V4L2_PIX_FMT_YUV420:
+- regmap_write(regmap, ISC_DAD1, addr0 + (sizeimage * 2) / 3);
+- regmap_write(regmap, ISC_DAD2, addr0 + (sizeimage * 5) / 6);
++ regmap_write(regmap, ISC_DAD1 + isc->offsets.dma,
++ addr0 + (sizeimage * 2) / 3);
++ regmap_write(regmap, ISC_DAD2 + isc->offsets.dma,
++ addr0 + (sizeimage * 5) / 6);
+ break;
+ case V4L2_PIX_FMT_YUV422P:
+- regmap_write(regmap, ISC_DAD1, addr0 + sizeimage / 2);
+- regmap_write(regmap, ISC_DAD2, addr0 + (sizeimage * 3) / 4);
++ regmap_write(regmap, ISC_DAD1 + isc->offsets.dma,
++ addr0 + sizeimage / 2);
++ regmap_write(regmap, ISC_DAD2 + isc->offsets.dma,
++ addr0 + (sizeimage * 3) / 4);
+ break;
+ default:
+ break;
+@@ -618,7 +622,8 @@ static void isc_start_dma(struct isc_device *isc)
+
+ dctrl_dview = isc->config.dctrl_dview;
+
+- regmap_write(regmap, ISC_DCTRL, dctrl_dview | ISC_DCTRL_IE_IS);
++ regmap_write(regmap, ISC_DCTRL + isc->offsets.dma,
++ dctrl_dview | ISC_DCTRL_IE_IS);
+ spin_lock(&isc->awb_lock);
+ regmap_write(regmap, ISC_CTRLEN, ISC_CTRL_CAPTURE);
+ spin_unlock(&isc->awb_lock);
+@@ -731,7 +736,7 @@ static int isc_configure(struct isc_device *isc)
+ regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp,
+ ISC_RLP_CFG_MODE_MASK, rlp_mode);
+
+- regmap_write(regmap, ISC_DCFG, dcfg);
++ regmap_write(regmap, ISC_DCFG + isc->offsets.dma, dcfg);
+
+ /* Set the pipeline */
+ isc_set_pipeline(isc, pipeline);
+diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
+index 0ab280ab59ec..4940998c82a2 100644
+--- a/drivers/media/platform/atmel/atmel-isc-regs.h
++++ b/drivers/media/platform/atmel/atmel-isc-regs.h
+@@ -247,6 +247,9 @@
+
+ #define ISC_HIS_CFG_RAR BIT(8)
+
++/* Offset for DMA register specific to sama5d2 product */
++#define ISC_SAMA5D2_DMA_OFFSET 0
++
+ /* DMA Configuration Register */
+ #define ISC_DCFG 0x000003e0
+ #define ISC_DCFG_IMODE_PACKED8 0x0
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 97ec4c58297e..bea545327d3d 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -151,6 +151,7 @@ struct isc_ctrls {
+ * @sub420: Offset for the SUB420 register
+ * @rlp: Offset for the RLP register
+ * @his: Offset for the HIS related registers
++ * @dma: Offset for the DMA related registers
+ */
+ struct isc_reg_offsets {
+ u32 csc;
+@@ -159,6 +160,7 @@ struct isc_reg_offsets {
+ u32 sub420;
+ u32 rlp;
+ u32 his;
++ u32 dma;
+ };
+
+ /*
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index db93cb76c08b..bfd56ac5c921 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -257,6 +257,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->offsets.sub420 = ISC_SAMA5D2_SUB420_OFFSET;
+ isc->offsets.rlp = ISC_SAMA5D2_RLP_OFFSET;
+ isc->offsets.his = ISC_SAMA5D2_HIS_OFFSET;
++ isc->offsets.dma = ISC_SAMA5D2_DMA_OFFSET;
+
+ /* sama5d2-isc - 8 bits per beat */
+ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/171-media-atmel-atmel-isc-add-support-for-version-regist.patch b/target/linux/at91/patches-5.10/171-media-atmel-atmel-isc-add-support-for-version-regist.patch
new file mode 100644
index 0000000000..6eca9dbf91
--- /dev/null
+++ b/target/linux/at91/patches-5.10/171-media-atmel-atmel-isc-add-support-for-version-regist.patch
@@ -0,0 +1,86 @@
+From 0939b0a92acca11a5a3b0de5dd70434e17e40ed3 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:13 +0200
+Subject: [PATCH 171/247] media: atmel: atmel-isc: add support for version
+ register
+
+Add support for version register and print it at probe time.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-regs.h | 5 +++++
+ drivers/media/platform/atmel/atmel-isc.h | 2 ++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 5 +++++
+ 3 files changed, 12 insertions(+)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
+index 4940998c82a2..344668dcfcf4 100644
+--- a/drivers/media/platform/atmel/atmel-isc-regs.h
++++ b/drivers/media/platform/atmel/atmel-isc-regs.h
+@@ -295,6 +295,11 @@
+ /* DMA Address 2 Register */
+ #define ISC_DAD2 0x000003fc
+
++/* Offset for version register specific to sama5d2 product */
++#define ISC_SAMA5D2_VERSION_OFFSET 0
++/* Version Register */
++#define ISC_VERSION 0x0000040c
++
+ /* Histogram Entry */
+ #define ISC_HIS_ENTRY 0x00000410
+
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index bea545327d3d..13ee19d99c2e 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -152,6 +152,7 @@ struct isc_ctrls {
+ * @rlp: Offset for the RLP register
+ * @his: Offset for the HIS related registers
+ * @dma: Offset for the DMA related registers
++ * @version: Offset for the version register
+ */
+ struct isc_reg_offsets {
+ u32 csc;
+@@ -161,6 +162,7 @@ struct isc_reg_offsets {
+ u32 rlp;
+ u32 his;
+ u32 dma;
++ u32 version;
+ };
+
+ /*
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index bfd56ac5c921..aebf38dde2d2 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -210,6 +210,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ struct isc_subdev_entity *subdev_entity;
+ int irq;
+ int ret;
++ u32 ver;
+
+ isc = devm_kzalloc(dev, sizeof(*isc), GFP_KERNEL);
+ if (!isc)
+@@ -258,6 +259,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->offsets.rlp = ISC_SAMA5D2_RLP_OFFSET;
+ isc->offsets.his = ISC_SAMA5D2_HIS_OFFSET;
+ isc->offsets.dma = ISC_SAMA5D2_DMA_OFFSET;
++ isc->offsets.version = ISC_SAMA5D2_VERSION_OFFSET;
+
+ /* sama5d2-isc - 8 bits per beat */
+ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
+@@ -346,6 +348,9 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ pm_runtime_enable(dev);
+ pm_request_idle(dev);
+
++ regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
++ dev_info(dev, "Microchip ISC version %x\n", ver);
++
+ return 0;
+
+ cleanup_subdev:
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/172-media-atmel-atmel-isc-add-his_entry-to-register-offs.patch b/target/linux/at91/patches-5.10/172-media-atmel-atmel-isc-add-his_entry-to-register-offs.patch
new file mode 100644
index 0000000000..dd5118ed2a
--- /dev/null
+++ b/target/linux/at91/patches-5.10/172-media-atmel-atmel-isc-add-his_entry-to-register-offs.patch
@@ -0,0 +1,82 @@
+From bce46a8a620a796ca3cfe5bff61baf6744074986 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:14 +0200
+Subject: [PATCH 172/247] media: atmel: atmel-isc: add his_entry to register
+ offsets
+
+Add his_entry to the reg offsets struct.
+This will allow different products to have a different reg offset for this
+particular module.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 3 ++-
+ drivers/media/platform/atmel/atmel-isc-regs.h | 2 ++
+ drivers/media/platform/atmel/atmel-isc.h | 2 ++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 1 +
+ 4 files changed, 7 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index e010429fc44d..cfe60b2882ac 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -1684,7 +1684,8 @@ static void isc_hist_count(struct isc_device *isc, u32 *min, u32 *max)
+ *min = 0;
+ *max = HIST_ENTRIES;
+
+- regmap_bulk_read(regmap, ISC_HIS_ENTRY, hist_entry, HIST_ENTRIES);
++ regmap_bulk_read(regmap, ISC_HIS_ENTRY + isc->offsets.his_entry,
++ hist_entry, HIST_ENTRIES);
+
+ *hist_count = 0;
+ /*
+diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
+index 344668dcfcf4..a15c13e1a833 100644
+--- a/drivers/media/platform/atmel/atmel-isc-regs.h
++++ b/drivers/media/platform/atmel/atmel-isc-regs.h
+@@ -300,6 +300,8 @@
+ /* Version Register */
+ #define ISC_VERSION 0x0000040c
+
++/* Offset for version register specific to sama5d2 product */
++#define ISC_SAMA5D2_HIS_ENTRY_OFFSET 0
+ /* Histogram Entry */
+ #define ISC_HIS_ENTRY 0x00000410
+
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 13ee19d99c2e..513b2b920b1f 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -153,6 +153,7 @@ struct isc_ctrls {
+ * @his: Offset for the HIS related registers
+ * @dma: Offset for the DMA related registers
+ * @version: Offset for the version register
++ * @his_entry: Offset for the HIS entries registers
+ */
+ struct isc_reg_offsets {
+ u32 csc;
+@@ -163,6 +164,7 @@ struct isc_reg_offsets {
+ u32 his;
+ u32 dma;
+ u32 version;
++ u32 his_entry;
+ };
+
+ /*
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index aebf38dde2d2..ed575eb3726d 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -260,6 +260,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->offsets.his = ISC_SAMA5D2_HIS_OFFSET;
+ isc->offsets.dma = ISC_SAMA5D2_DMA_OFFSET;
+ isc->offsets.version = ISC_SAMA5D2_VERSION_OFFSET;
++ isc->offsets.his_entry = ISC_SAMA5D2_HIS_ENTRY_OFFSET;
+
+ /* sama5d2-isc - 8 bits per beat */
+ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/173-media-atmel-atmel-isc-add-register-description-for-a.patch b/target/linux/at91/patches-5.10/173-media-atmel-atmel-isc-add-register-description-for-a.patch
new file mode 100644
index 0000000000..3828835196
--- /dev/null
+++ b/target/linux/at91/patches-5.10/173-media-atmel-atmel-isc-add-register-description-for-a.patch
@@ -0,0 +1,104 @@
+From 87b581b1197df5f77bd65819d0428f2404c6b764 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:15 +0200
+Subject: [PATCH 173/247] media: atmel: atmel-isc: add register description for
+ additional modules
+
+Add register description for additional pipeline modules: the
+Defective Pixel Correction (DPC) and the Vertical and Horizontal Scaler(VHXS)
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-regs.h | 67 +++++++++++++++++++
+ 1 file changed, 67 insertions(+)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
+index a15c13e1a833..457eed74cda9 100644
+--- a/drivers/media/platform/atmel/atmel-isc-regs.h
++++ b/drivers/media/platform/atmel/atmel-isc-regs.h
+@@ -90,6 +90,46 @@
+ #define ISC_INT_DDONE BIT(8)
+ #define ISC_INT_HISDONE BIT(12)
+
++/* ISC DPC Control Register */
++#define ISC_DPC_CTRL 0x40
++
++#define ISC_DPC_CTRL_DPCEN BIT(0)
++#define ISC_DPC_CTRL_GDCEN BIT(1)
++#define ISC_DPC_CTRL_BLCEN BIT(2)
++
++/* ISC DPC Config Register */
++#define ISC_DPC_CFG 0x44
++
++#define ISC_DPC_CFG_BAYSEL_SHIFT 0
++
++#define ISC_DPC_CFG_EITPOL BIT(4)
++
++#define ISC_DPC_CFG_TA_ENABLE BIT(14)
++#define ISC_DPC_CFG_TC_ENABLE BIT(13)
++#define ISC_DPC_CFG_TM_ENABLE BIT(12)
++
++#define ISC_DPC_CFG_RE_MODE BIT(17)
++
++#define ISC_DPC_CFG_GDCCLP_SHIFT 20
++#define ISC_DPC_CFG_GDCCLP_MASK GENMASK(22, 20)
++
++#define ISC_DPC_CFG_BLOFF_SHIFT 24
++#define ISC_DPC_CFG_BLOFF_MASK GENMASK(31, 24)
++
++#define ISC_DPC_CFG_BAYCFG_SHIFT 0
++#define ISC_DPC_CFG_BAYCFG_MASK GENMASK(1, 0)
++/* ISC DPC Threshold Median Register */
++#define ISC_DPC_THRESHM 0x48
++
++/* ISC DPC Threshold Closest Register */
++#define ISC_DPC_THRESHC 0x4C
++
++/* ISC DPC Threshold Average Register */
++#define ISC_DPC_THRESHA 0x50
++
++/* ISC DPC STatus Register */
++#define ISC_DPC_SR 0x54
++
+ /* ISC White Balance Control Register */
+ #define ISC_WB_CTRL 0x00000058
+
+@@ -153,6 +193,33 @@
+ /* ISC_Gamma Correction Green Entry Register */
+ #define ISC_GAM_RENTRY 0x00000298
+
++/* ISC VHXS Control Register */
++#define ISC_VHXS_CTRL 0x398
++
++/* ISC VHXS Source Size Register */
++#define ISC_VHXS_SS 0x39C
++
++/* ISC VHXS Destination Size Register */
++#define ISC_VHXS_DS 0x3A0
++
++/* ISC Vertical Factor Register */
++#define ISC_VXS_FACT 0x3a4
++
++/* ISC Horizontal Factor Register */
++#define ISC_HXS_FACT 0x3a8
++
++/* ISC Vertical Config Register */
++#define ISC_VXS_CFG 0x3ac
++
++/* ISC Horizontal Config Register */
++#define ISC_HXS_CFG 0x3b0
++
++/* ISC Vertical Tap Register */
++#define ISC_VXS_TAP 0x3b4
++
++/* ISC Horizontal Tap Register */
++#define ISC_HXS_TAP 0x434
++
+ /* Offset for CSC register specific to sama5d2 product */
+ #define ISC_SAMA5D2_CSC_OFFSET 0
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/174-media-atmel-atmel-isc-extend-pipeline-with-extra-mod.patch b/target/linux/at91/patches-5.10/174-media-atmel-atmel-isc-extend-pipeline-with-extra-mod.patch
new file mode 100644
index 0000000000..ee93b34a77
--- /dev/null
+++ b/target/linux/at91/patches-5.10/174-media-atmel-atmel-isc-extend-pipeline-with-extra-mod.patch
@@ -0,0 +1,111 @@
+From 58a6cc3c7eecd16208cd16b92b4eaf8385e69696 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:16 +0200
+Subject: [PATCH 174/247] media: atmel: atmel-isc: extend pipeline with extra
+ modules
+
+Newer ISC pipelines have the additional modules of
+Defective Pixel Correction -> DPC itself,
+Defective Pixel Correction -> Green Disparity Correction (DPC_GDC)
+Defective Pixel Correction -> Black Level Correction (DPC_BLC)
+Vertical and Horizontal Scaler -> VHXS
+
+Some products have this full pipeline (sama7g5), other products do not (sama5d2)
+
+Add the modules to the isc base, and also extend the register range to include
+the modules.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 11 ++++++--
+ drivers/media/platform/atmel/atmel-isc.h | 28 +++++++++++--------
+ 2 files changed, 25 insertions(+), 14 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index cfe60b2882ac..a6b62e009c38 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -2324,8 +2324,14 @@ int isc_pipeline_init(struct isc_device *isc)
+ struct regmap_field *regs;
+ unsigned int i;
+
+- /* WB-->CFA-->CC-->GAM-->CSC-->CBC-->SUB422-->SUB420 */
++ /*
++ * DPCEN-->GDCEN-->BLCEN-->WB-->CFA-->CC-->
++ * GAM-->VHXS-->CSC-->CBC-->SUB422-->SUB420
++ */
+ const struct reg_field regfields[ISC_PIPE_LINE_NODE_NUM] = {
++ REG_FIELD(ISC_DPC_CTRL, 0, 0),
++ REG_FIELD(ISC_DPC_CTRL, 1, 1),
++ REG_FIELD(ISC_DPC_CTRL, 2, 2),
+ REG_FIELD(ISC_WB_CTRL, 0, 0),
+ REG_FIELD(ISC_CFA_CTRL, 0, 0),
+ REG_FIELD(ISC_CC_CTRL, 0, 0),
+@@ -2333,6 +2339,7 @@ int isc_pipeline_init(struct isc_device *isc)
+ REG_FIELD(ISC_GAM_CTRL, 1, 1),
+ REG_FIELD(ISC_GAM_CTRL, 2, 2),
+ REG_FIELD(ISC_GAM_CTRL, 3, 3),
++ REG_FIELD(ISC_VHXS_CTRL, 0, 0),
+ REG_FIELD(ISC_CSC_CTRL + isc->offsets.csc, 0, 0),
+ REG_FIELD(ISC_CBC_CTRL + isc->offsets.cbc, 0, 0),
+ REG_FIELD(ISC_SUB422_CTRL + isc->offsets.sub422, 0, 0),
+@@ -2351,7 +2358,7 @@ int isc_pipeline_init(struct isc_device *isc)
+ }
+
+ /* regmap configuration */
+-#define ATMEL_ISC_REG_MAX 0xbfc
++#define ATMEL_ISC_REG_MAX 0xd5c
+ const struct regmap_config isc_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 513b2b920b1f..86edeea2d5cd 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -67,17 +67,21 @@ struct isc_format {
+ };
+
+ /* Pipeline bitmap */
+-#define WB_ENABLE BIT(0)
+-#define CFA_ENABLE BIT(1)
+-#define CC_ENABLE BIT(2)
+-#define GAM_ENABLE BIT(3)
+-#define GAM_BENABLE BIT(4)
+-#define GAM_GENABLE BIT(5)
+-#define GAM_RENABLE BIT(6)
+-#define CSC_ENABLE BIT(7)
+-#define CBC_ENABLE BIT(8)
+-#define SUB422_ENABLE BIT(9)
+-#define SUB420_ENABLE BIT(10)
++#define DPC_DPCENABLE BIT(0)
++#define DPC_GDCENABLE BIT(1)
++#define DPC_BLCENABLE BIT(2)
++#define WB_ENABLE BIT(3)
++#define CFA_ENABLE BIT(4)
++#define CC_ENABLE BIT(5)
++#define GAM_ENABLE BIT(6)
++#define GAM_BENABLE BIT(7)
++#define GAM_GENABLE BIT(8)
++#define GAM_RENABLE BIT(9)
++#define VHXS_ENABLE BIT(10)
++#define CSC_ENABLE BIT(11)
++#define CBC_ENABLE BIT(12)
++#define SUB422_ENABLE BIT(13)
++#define SUB420_ENABLE BIT(14)
+
+ #define GAM_ENABLES (GAM_RENABLE | GAM_GENABLE | GAM_BENABLE | GAM_ENABLE)
+
+@@ -141,7 +145,7 @@ struct isc_ctrls {
+ u32 hist_minmax[HIST_BAYER][2];
+ };
+
+-#define ISC_PIPE_LINE_NODE_NUM 11
++#define ISC_PIPE_LINE_NODE_NUM 15
+
+ /*
+ * struct isc_reg_offsets - ISC device register offsets
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/175-media-atmel-atmel-isc-add-CC-initialization-function.patch b/target/linux/at91/patches-5.10/175-media-atmel-atmel-isc-add-CC-initialization-function.patch
new file mode 100644
index 0000000000..91c68c82ff
--- /dev/null
+++ b/target/linux/at91/patches-5.10/175-media-atmel-atmel-isc-add-CC-initialization-function.patch
@@ -0,0 +1,92 @@
+From 0db91d2a803221c313c9f2cd1d71050d7c5a7b5b Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:17 +0200
+Subject: [PATCH 175/247] media: atmel: atmel-isc: add CC initialization
+ function
+
+The CC submodule is a part of the atmel-isc pipeline, and stands for
+Color Correction. It is used to apply gains and offsets to the
+chroma (U, V) components of the YUV elements.
+Implement the CC submodule initialization, as a product
+specific function, which currently configures the neutral point in color
+correction.
+
+[hverkuil: made isc_sama5d2_config_cc static]
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 1 +
+ drivers/media/platform/atmel/atmel-isc.h | 3 +++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 14 ++++++++++++++
+ 3 files changed, 18 insertions(+)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index a6b62e009c38..ffce8de2cf4d 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -661,6 +661,7 @@ static void isc_set_pipeline(struct isc_device *isc, u32 pipeline)
+
+ isc->config_csc(isc);
+ isc->config_cbc(isc);
++ isc->config_cc(isc);
+ }
+
+ static int isc_update_profile(struct isc_device *isc)
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 86edeea2d5cd..293746664cef 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -224,6 +224,8 @@ struct isc_reg_offsets {
+ * specific CSC module
+ * @config_cbc: pointer to a function that initializes product
+ * specific CBC module
++ * @config_cc: pointer to a function that initializes product
++ * specific CC module
+ *
+ * @offsets: struct holding the product specific register offsets
+ */
+@@ -297,6 +299,7 @@ struct isc_device {
+ struct {
+ void (*config_csc)(struct isc_device *isc);
+ void (*config_cbc)(struct isc_device *isc);
++ void (*config_cc)(struct isc_device *isc);
+ };
+
+ struct isc_reg_offsets offsets;
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index ed575eb3726d..903920b74965 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -83,6 +83,19 @@ static void isc_sama5d2_config_cbc(struct isc_device *isc)
+ isc->ctrls.contrast);
+ }
+
++static void isc_sama5d2_config_cc(struct isc_device *isc)
++{
++ struct regmap *regmap = isc->regmap;
++
++ /* Configure each register at the neutral fixed point 1.0 or 0.0 */
++ regmap_write(regmap, ISC_CC_RR_RG, (1 << 8));
++ regmap_write(regmap, ISC_CC_RB_OR, 0);
++ regmap_write(regmap, ISC_CC_GR_GG, (1 << 8) << 16);
++ regmap_write(regmap, ISC_CC_GB_OG, 0);
++ regmap_write(regmap, ISC_CC_BR_BG, 0);
++ regmap_write(regmap, ISC_CC_BB_OB, (1 << 8));
++}
++
+ /* Gamma table with gamma 1/2.2 */
+ static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
+ /* 0 --> gamma 1/1.8 */
+@@ -251,6 +264,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+
+ isc->config_csc = isc_sama5d2_config_csc;
+ isc->config_cbc = isc_sama5d2_config_cbc;
++ isc->config_cc = isc_sama5d2_config_cc;
+
+ isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
+ isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/176-media-atmel-atmel-isc-create-product-specific-v4l2-c.patch b/target/linux/at91/patches-5.10/176-media-atmel-atmel-isc-create-product-specific-v4l2-c.patch
new file mode 100644
index 0000000000..4ba3e3cace
--- /dev/null
+++ b/target/linux/at91/patches-5.10/176-media-atmel-atmel-isc-create-product-specific-v4l2-c.patch
@@ -0,0 +1,95 @@
+From 0a75c502eac4f2ef71b6c3e0b3a01db1b3c37ba9 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:18 +0200
+Subject: [PATCH 176/247] media: atmel: atmel-isc: create product specific v4l2
+ controls config
+
+Create product specific callback for initializing v4l2 controls.
+Call this from v4l2 controls init function.
+
+[hverkuil: made isc_sama5d2_config_ctrls static]
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 5 +++--
+ drivers/media/platform/atmel/atmel-isc.h | 5 +++++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 12 ++++++++++++
+ 3 files changed, 20 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index ffce8de2cf4d..8ed8b8a4840c 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -2051,11 +2051,12 @@ static int isc_ctrl_init(struct isc_device *isc)
+ if (ret < 0)
+ return ret;
+
++ /* Initialize product specific controls. For example, contrast */
++ isc->config_ctrls(isc, ops);
++
+ ctrls->brightness = 0;
+- ctrls->contrast = 256;
+
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BRIGHTNESS, -1024, 1023, 1, 0);
+- v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 256);
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAMMA, 0, isc->gamma_max, 1,
+ isc->gamma_max);
+ isc->awb_ctrl = v4l2_ctrl_new_std(hdl, &isc_awb_ops,
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 293746664cef..428419d5a07d 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -226,6 +226,8 @@ struct isc_reg_offsets {
+ * specific CBC module
+ * @config_cc: pointer to a function that initializes product
+ * specific CC module
++ * @config_ctrls: pointer to a functoin that initializes product
++ * specific v4l2 controls.
+ *
+ * @offsets: struct holding the product specific register offsets
+ */
+@@ -300,6 +302,9 @@ struct isc_device {
+ void (*config_csc)(struct isc_device *isc);
+ void (*config_cbc)(struct isc_device *isc);
+ void (*config_cc)(struct isc_device *isc);
++
++ void (*config_ctrls)(struct isc_device *isc,
++ const struct v4l2_ctrl_ops *ops);
+ };
+
+ struct isc_reg_offsets offsets;
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index 903920b74965..7512012cd9f3 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -96,6 +96,17 @@ static void isc_sama5d2_config_cc(struct isc_device *isc)
+ regmap_write(regmap, ISC_CC_BB_OB, (1 << 8));
+ }
+
++static void isc_sama5d2_config_ctrls(struct isc_device *isc,
++ const struct v4l2_ctrl_ops *ops)
++{
++ struct isc_ctrls *ctrls = &isc->ctrls;
++ struct v4l2_ctrl_handler *hdl = &ctrls->handler;
++
++ ctrls->contrast = 256;
++
++ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 256);
++}
++
+ /* Gamma table with gamma 1/2.2 */
+ static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
+ /* 0 --> gamma 1/1.8 */
+@@ -265,6 +276,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->config_csc = isc_sama5d2_config_csc;
+ isc->config_cbc = isc_sama5d2_config_cbc;
+ isc->config_cc = isc_sama5d2_config_cc;
++ isc->config_ctrls = isc_sama5d2_config_ctrls;
+
+ isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
+ isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/177-media-atmel-atmel-isc-create-callback-for-DPC-submod.patch b/target/linux/at91/patches-5.10/177-media-atmel-atmel-isc-create-callback-for-DPC-submod.patch
new file mode 100644
index 0000000000..466ddb97b9
--- /dev/null
+++ b/target/linux/at91/patches-5.10/177-media-atmel-atmel-isc-create-callback-for-DPC-submod.patch
@@ -0,0 +1,84 @@
+From d53eb90044c19ba22b51978fcb007d9b5200b83a Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:19 +0200
+Subject: [PATCH 177/247] media: atmel: atmel-isc: create callback for DPC
+ submodule product specific
+
+The DPC submodule is a part of the atmel-isc pipeline, and stands for
+Defective Pixel Correction. Its purpose is to detect defective pixels and
+correct them if possible with the help of adjacent pixels.
+Create a product specific callback for initializing the DPC submodule
+of the pipeline.
+For sama5d2 product, this module does not exist, thus this function is a noop.
+
+[hverkuil: made isc_sama5d2_config_dpc static]
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 1 +
+ drivers/media/platform/atmel/atmel-isc.h | 3 +++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 6 ++++++
+ 3 files changed, 10 insertions(+)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 8ed8b8a4840c..777a5dc19d6e 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -659,6 +659,7 @@ static void isc_set_pipeline(struct isc_device *isc, u32 pipeline)
+ regmap_bulk_write(regmap, ISC_GAM_GENTRY, gamma, GAMMA_ENTRIES);
+ regmap_bulk_write(regmap, ISC_GAM_RENTRY, gamma, GAMMA_ENTRIES);
+
++ isc->config_dpc(isc);
+ isc->config_csc(isc);
+ isc->config_cbc(isc);
+ isc->config_cc(isc);
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 428419d5a07d..2f093dc968cd 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -220,6 +220,8 @@ struct isc_reg_offsets {
+ * @max_width: maximum frame width, dependent on the internal RAM
+ * @max_height: maximum frame height, dependent on the internal RAM
+ *
++ * @config_dpc: pointer to a function that initializes product
++ * specific DPC module
+ * @config_csc: pointer to a function that initializes product
+ * specific CSC module
+ * @config_cbc: pointer to a function that initializes product
+@@ -299,6 +301,7 @@ struct isc_device {
+ u32 max_height;
+
+ struct {
++ void (*config_dpc)(struct isc_device *isc);
+ void (*config_csc)(struct isc_device *isc);
+ void (*config_cbc)(struct isc_device *isc);
+ void (*config_cc)(struct isc_device *isc);
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index 7512012cd9f3..84d1bf3305f2 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -107,6 +107,11 @@ static void isc_sama5d2_config_ctrls(struct isc_device *isc,
+ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 256);
+ }
+
++static void isc_sama5d2_config_dpc(struct isc_device *isc)
++{
++ /* This module is not present on sama5d2 pipeline */
++}
++
+ /* Gamma table with gamma 1/2.2 */
+ static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
+ /* 0 --> gamma 1/1.8 */
+@@ -273,6 +278,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->max_width = ISC_SAMA5D2_MAX_SUPPORT_WIDTH;
+ isc->max_height = ISC_SAMA5D2_MAX_SUPPORT_HEIGHT;
+
++ isc->config_dpc = isc_sama5d2_config_dpc;
+ isc->config_csc = isc_sama5d2_config_csc;
+ isc->config_cbc = isc_sama5d2_config_cbc;
+ isc->config_cc = isc_sama5d2_config_cc;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/178-media-atmel-atmel-isc-create-callback-for-GAM-submod.patch b/target/linux/at91/patches-5.10/178-media-atmel-atmel-isc-create-callback-for-GAM-submod.patch
new file mode 100644
index 0000000000..6d53179f4a
--- /dev/null
+++ b/target/linux/at91/patches-5.10/178-media-atmel-atmel-isc-create-callback-for-GAM-submod.patch
@@ -0,0 +1,84 @@
+From 96936a6753a13dea5a8f66de949e6594dd82ce22 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:20 +0200
+Subject: [PATCH 178/247] media: atmel: atmel-isc: create callback for GAM
+ submodule product specific
+
+The GAM submodule is a part of the atmel-isc pipeline, and stands for
+Gamma Correction. It is used to apply the gamma curve to the incoming pixels.
+Create a product specific callback for initializing the GAM submodule
+of the pipeline.
+For sama5d2 product, there is no special configuration at this moment,
+thus this function is a noop.
+
+[hverkuil: made isc_sama5d2_config_gam static]
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 1 +
+ drivers/media/platform/atmel/atmel-isc.h | 3 +++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 6 ++++++
+ 3 files changed, 10 insertions(+)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 777a5dc19d6e..aef0d6570d39 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -663,6 +663,7 @@ static void isc_set_pipeline(struct isc_device *isc, u32 pipeline)
+ isc->config_csc(isc);
+ isc->config_cbc(isc);
+ isc->config_cc(isc);
++ isc->config_gam(isc);
+ }
+
+ static int isc_update_profile(struct isc_device *isc)
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 2f093dc968cd..151997c11f56 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -228,6 +228,8 @@ struct isc_reg_offsets {
+ * specific CBC module
+ * @config_cc: pointer to a function that initializes product
+ * specific CC module
++ * @config_gam: pointer to a function that initializes product
++ * specific GAMMA module
+ * @config_ctrls: pointer to a functoin that initializes product
+ * specific v4l2 controls.
+ *
+@@ -305,6 +307,7 @@ struct isc_device {
+ void (*config_csc)(struct isc_device *isc);
+ void (*config_cbc)(struct isc_device *isc);
+ void (*config_cc)(struct isc_device *isc);
++ void (*config_gam)(struct isc_device *isc);
+
+ void (*config_ctrls)(struct isc_device *isc,
+ const struct v4l2_ctrl_ops *ops);
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index 84d1bf3305f2..b99849ecb8a1 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -112,6 +112,11 @@ static void isc_sama5d2_config_dpc(struct isc_device *isc)
+ /* This module is not present on sama5d2 pipeline */
+ }
+
++static void isc_sama5d2_config_gam(struct isc_device *isc)
++{
++ /* No specific gamma configuration */
++}
++
+ /* Gamma table with gamma 1/2.2 */
+ static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
+ /* 0 --> gamma 1/1.8 */
+@@ -282,6 +287,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->config_csc = isc_sama5d2_config_csc;
+ isc->config_cbc = isc_sama5d2_config_cbc;
+ isc->config_cc = isc_sama5d2_config_cc;
++ isc->config_gam = isc_sama5d2_config_gam;
+ isc->config_ctrls = isc_sama5d2_config_ctrls;
+
+ isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/179-media-atmel-atmel-isc-create-callback-for-RLP-submod.patch b/target/linux/at91/patches-5.10/179-media-atmel-atmel-isc-create-callback-for-RLP-submod.patch
new file mode 100644
index 0000000000..74a08b2209
--- /dev/null
+++ b/target/linux/at91/patches-5.10/179-media-atmel-atmel-isc-create-callback-for-RLP-submod.patch
@@ -0,0 +1,104 @@
+From ece1d7059731e31875e6eb464da4fb4a16465305 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:21 +0200
+Subject: [PATCH 179/247] media: atmel: atmel-isc: create callback for RLP
+ submodule product specific
+
+The RLP submodule is a part of the atmel-isc pipeline, and stands for
+Rounding,Limiting and Packaging. It used to extract specific data from the
+ISC pipeline. For example if we want to output greyscale 8 bit, we would
+use limiting to 8 bits, and packaging to Luma component only.
+
+Create a product specific callback for initializing the RLP submodule
+of the pipeline
+
+[hverkuil: made isc_sama5d2_config_rlp static]
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 6 ++----
+ drivers/media/platform/atmel/atmel-isc.h | 3 +++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 10 ++++++++++
+ 3 files changed, 15 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index aef0d6570d39..67c16ca17672 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -719,11 +719,10 @@ static void isc_set_histogram(struct isc_device *isc, bool enable)
+ static int isc_configure(struct isc_device *isc)
+ {
+ struct regmap *regmap = isc->regmap;
+- u32 pfe_cfg0, rlp_mode, dcfg, mask, pipeline;
++ u32 pfe_cfg0, dcfg, mask, pipeline;
+ struct isc_subdev_entity *subdev = isc->current_subdev;
+
+ pfe_cfg0 = isc->config.sd_format->pfe_cfg0_bps;
+- rlp_mode = isc->config.rlp_cfg_mode;
+ pipeline = isc->config.bits_pipeline;
+
+ dcfg = isc->config.dcfg_imode | isc->dcfg;
+@@ -736,8 +735,7 @@ static int isc_configure(struct isc_device *isc)
+
+ regmap_update_bits(regmap, ISC_PFE_CFG0, mask, pfe_cfg0);
+
+- regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp,
+- ISC_RLP_CFG_MODE_MASK, rlp_mode);
++ isc->config_rlp(isc);
+
+ regmap_write(regmap, ISC_DCFG + isc->offsets.dma, dcfg);
+
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 151997c11f56..24006327c5e4 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -230,6 +230,8 @@ struct isc_reg_offsets {
+ * specific CC module
+ * @config_gam: pointer to a function that initializes product
+ * specific GAMMA module
++ * @config_rlp: pointer to a function that initializes product
++ * specific RLP module
+ * @config_ctrls: pointer to a functoin that initializes product
+ * specific v4l2 controls.
+ *
+@@ -308,6 +310,7 @@ struct isc_device {
+ void (*config_cbc)(struct isc_device *isc);
+ void (*config_cc)(struct isc_device *isc);
+ void (*config_gam)(struct isc_device *isc);
++ void (*config_rlp)(struct isc_device *isc);
+
+ void (*config_ctrls)(struct isc_device *isc,
+ const struct v4l2_ctrl_ops *ops);
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index b99849ecb8a1..86704a1a24b9 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -117,6 +117,15 @@ static void isc_sama5d2_config_gam(struct isc_device *isc)
+ /* No specific gamma configuration */
+ }
+
++static void isc_sama5d2_config_rlp(struct isc_device *isc)
++{
++ struct regmap *regmap = isc->regmap;
++ u32 rlp_mode = isc->config.rlp_cfg_mode;
++
++ regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp,
++ ISC_RLP_CFG_MODE_MASK, rlp_mode);
++}
++
+ /* Gamma table with gamma 1/2.2 */
+ static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
+ /* 0 --> gamma 1/1.8 */
+@@ -288,6 +297,7 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->config_cbc = isc_sama5d2_config_cbc;
+ isc->config_cc = isc_sama5d2_config_cc;
+ isc->config_gam = isc_sama5d2_config_gam;
++ isc->config_rlp = isc_sama5d2_config_rlp;
+ isc->config_ctrls = isc_sama5d2_config_ctrls;
+
+ isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/180-media-atmel-atmel-isc-move-the-formats-list-into-pro.patch b/target/linux/at91/patches-5.10/180-media-atmel-atmel-isc-move-the-formats-list-into-pro.patch
new file mode 100644
index 0000000000..cce3fabc4c
--- /dev/null
+++ b/target/linux/at91/patches-5.10/180-media-atmel-atmel-isc-move-the-formats-list-into-pro.patch
@@ -0,0 +1,449 @@
+From dda51aa2e4524914d25022864466fa9d8713a5e9 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:22 +0200
+Subject: [PATCH 180/247] media: atmel: atmel-isc: move the formats list into
+ product specific code
+
+The list of input and output formats has to be product specific.
+Move this list into the product specific code.
+Have pointers to these arrays inside the device struct.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 167 ++----------------
+ drivers/media/platform/atmel/atmel-isc.h | 12 +-
+ .../media/platform/atmel/atmel-sama5d2-isc.c | 136 ++++++++++++++
+ 3 files changed, 165 insertions(+), 150 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 67c16ca17672..90a62d43fdb1 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -45,137 +45,6 @@ module_param(sensor_preferred, uint, 0644);
+ MODULE_PARM_DESC(sensor_preferred,
+ "Sensor is preferred to output the specified format (1-on 0-off), default 1");
+
+-/* This is a list of the formats that the ISC can *output* */
+-const struct isc_format controller_formats[] = {
+- {
+- .fourcc = V4L2_PIX_FMT_ARGB444,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_ARGB555,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_RGB565,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_ABGR32,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_XBGR32,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_YUV420,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_YUYV,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_YUV422P,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_GREY,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_Y10,
+- },
+-};
+-
+-/* This is a list of formats that the ISC can receive as *input* */
+-struct isc_format formats_list[] = {
+- {
+- .fourcc = V4L2_PIX_FMT_SBGGR8,
+- .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8,
+- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+- .cfa_baycfg = ISC_BAY_CFG_BGBG,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_SGBRG8,
+- .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8,
+- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+- .cfa_baycfg = ISC_BAY_CFG_GBGB,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_SGRBG8,
+- .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8,
+- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+- .cfa_baycfg = ISC_BAY_CFG_GRGR,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_SRGGB8,
+- .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8,
+- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+- .cfa_baycfg = ISC_BAY_CFG_RGRG,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_SBGGR10,
+- .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10,
+- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
+- .cfa_baycfg = ISC_BAY_CFG_RGRG,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_SGBRG10,
+- .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10,
+- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
+- .cfa_baycfg = ISC_BAY_CFG_GBGB,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_SGRBG10,
+- .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10,
+- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
+- .cfa_baycfg = ISC_BAY_CFG_GRGR,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_SRGGB10,
+- .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10,
+- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
+- .cfa_baycfg = ISC_BAY_CFG_RGRG,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_SBGGR12,
+- .mbus_code = MEDIA_BUS_FMT_SBGGR12_1X12,
+- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
+- .cfa_baycfg = ISC_BAY_CFG_BGBG,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_SGBRG12,
+- .mbus_code = MEDIA_BUS_FMT_SGBRG12_1X12,
+- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
+- .cfa_baycfg = ISC_BAY_CFG_GBGB,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_SGRBG12,
+- .mbus_code = MEDIA_BUS_FMT_SGRBG12_1X12,
+- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
+- .cfa_baycfg = ISC_BAY_CFG_GRGR,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_SRGGB12,
+- .mbus_code = MEDIA_BUS_FMT_SRGGB12_1X12,
+- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
+- .cfa_baycfg = ISC_BAY_CFG_RGRG,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_GREY,
+- .mbus_code = MEDIA_BUS_FMT_Y8_1X8,
+- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_YUYV,
+- .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
+- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_RGB565,
+- .mbus_code = MEDIA_BUS_FMT_RGB565_2X8_LE,
+- .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
+- },
+- {
+- .fourcc = V4L2_PIX_FMT_Y10,
+- .mbus_code = MEDIA_BUS_FMT_Y10_1X10,
+- .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
+- },
+-
+-};
+-
+ #define ISC_IS_FORMAT_RAW(mbus_code) \
+ (((mbus_code) & 0xf000) == 0x3000)
+
+@@ -919,24 +788,25 @@ static int isc_querycap(struct file *file, void *priv,
+ static int isc_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+ {
++ struct isc_device *isc = video_drvdata(file);
+ u32 index = f->index;
+ u32 i, supported_index;
+
+- if (index < ARRAY_SIZE(controller_formats)) {
+- f->pixelformat = controller_formats[index].fourcc;
++ if (index < isc->controller_formats_size) {
++ f->pixelformat = isc->controller_formats[index].fourcc;
+ return 0;
+ }
+
+- index -= ARRAY_SIZE(controller_formats);
++ index -= isc->controller_formats_size;
+
+ supported_index = 0;
+
+- for (i = 0; i < ARRAY_SIZE(formats_list); i++) {
+- if (!ISC_IS_FORMAT_RAW(formats_list[i].mbus_code) ||
+- !formats_list[i].sd_support)
++ for (i = 0; i < isc->formats_list_size; i++) {
++ if (!ISC_IS_FORMAT_RAW(isc->formats_list[i].mbus_code) ||
++ !isc->formats_list[i].sd_support)
+ continue;
+ if (supported_index == index) {
+- f->pixelformat = formats_list[i].fourcc;
++ f->pixelformat = isc->formats_list[i].fourcc;
+ return 0;
+ }
+ supported_index++;
+@@ -1477,8 +1347,8 @@ static int isc_enum_framesizes(struct file *file, void *fh,
+ if (isc->user_formats[i]->fourcc == fsize->pixel_format)
+ ret = 0;
+
+- for (i = 0; i < ARRAY_SIZE(controller_formats); i++)
+- if (controller_formats[i].fourcc == fsize->pixel_format)
++ for (i = 0; i < isc->controller_formats_size; i++)
++ if (isc->controller_formats[i].fourcc == fsize->pixel_format)
+ ret = 0;
+
+ if (ret)
+@@ -1514,8 +1384,8 @@ static int isc_enum_frameintervals(struct file *file, void *fh,
+ if (isc->user_formats[i]->fourcc == fival->pixel_format)
+ ret = 0;
+
+- for (i = 0; i < ARRAY_SIZE(controller_formats); i++)
+- if (controller_formats[i].fourcc == fival->pixel_format)
++ for (i = 0; i < isc->controller_formats_size; i++)
++ if (isc->controller_formats[i].fourcc == fival->pixel_format)
+ ret = 0;
+
+ if (ret)
+@@ -2126,12 +1996,13 @@ static void isc_async_unbind(struct v4l2_async_notifier *notifier,
+ v4l2_ctrl_handler_free(&isc->ctrls.handler);
+ }
+
+-static struct isc_format *find_format_by_code(unsigned int code, int *index)
++static struct isc_format *find_format_by_code(struct isc_device *isc,
++ unsigned int code, int *index)
+ {
+- struct isc_format *fmt = &formats_list[0];
++ struct isc_format *fmt = &isc->formats_list[0];
+ unsigned int i;
+
+- for (i = 0; i < ARRAY_SIZE(formats_list); i++) {
++ for (i = 0; i < isc->formats_list_size; i++) {
+ if (fmt->mbus_code == code) {
+ *index = i;
+ return fmt;
+@@ -2148,7 +2019,7 @@ static int isc_formats_init(struct isc_device *isc)
+ struct isc_format *fmt;
+ struct v4l2_subdev *subdev = isc->current_subdev->sd;
+ unsigned int num_fmts, i, j;
+- u32 list_size = ARRAY_SIZE(formats_list);
++ u32 list_size = isc->formats_list_size;
+ struct v4l2_subdev_mbus_code_enum mbus_code = {
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ };
+@@ -2158,7 +2029,7 @@ static int isc_formats_init(struct isc_device *isc)
+ NULL, &mbus_code)) {
+ mbus_code.index++;
+
+- fmt = find_format_by_code(mbus_code.code, &i);
++ fmt = find_format_by_code(isc, mbus_code.code, &i);
+ if (!fmt) {
+ v4l2_warn(&isc->v4l2_dev, "Mbus code %x not supported\n",
+ mbus_code.code);
+@@ -2179,7 +2050,7 @@ static int isc_formats_init(struct isc_device *isc)
+ if (!isc->user_formats)
+ return -ENOMEM;
+
+- fmt = &formats_list[0];
++ fmt = &isc->formats_list[0];
+ for (i = 0, j = 0; i < list_size; i++) {
+ if (fmt->sd_support)
+ isc->user_formats[j++] = fmt;
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index 24006327c5e4..b34737c09a5b 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -236,6 +236,12 @@ struct isc_reg_offsets {
+ * specific v4l2 controls.
+ *
+ * @offsets: struct holding the product specific register offsets
++ * @controller_formats: pointer to the array of possible formats that the
++ * controller can output
++ * @formats_list: pointer to the array of possible formats that can
++ * be used as an input to the controller
++ * @controller_formats_size: size of controller_formats array
++ * @formats_list_size: size of formats_list array
+ */
+ struct isc_device {
+ struct regmap *regmap;
+@@ -317,10 +323,12 @@ struct isc_device {
+ };
+
+ struct isc_reg_offsets offsets;
++ const struct isc_format *controller_formats;
++ struct isc_format *formats_list;
++ u32 controller_formats_size;
++ u32 formats_list_size;
+ };
+
+-extern struct isc_format formats_list[];
+-extern const struct isc_format controller_formats[];
+ extern const struct regmap_config isc_regmap_config;
+ extern const struct v4l2_async_notifier_operations isc_async_ops;
+
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index 86704a1a24b9..b8c1b57ed820 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -54,6 +54,137 @@
+
+ #define ISC_CLK_MAX_DIV 255
+
++/* This is a list of the formats that the ISC can *output* */
++static const struct isc_format sama5d2_controller_formats[] = {
++ {
++ .fourcc = V4L2_PIX_FMT_ARGB444,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_ARGB555,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_RGB565,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_ABGR32,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_XBGR32,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_YUV420,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_YUYV,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_YUV422P,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_GREY,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_Y10,
++ },
++};
++
++/* This is a list of formats that the ISC can receive as *input* */
++static struct isc_format sama5d2_formats_list[] = {
++ {
++ .fourcc = V4L2_PIX_FMT_SBGGR8,
++ .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ .cfa_baycfg = ISC_BAY_CFG_BGBG,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SGBRG8,
++ .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ .cfa_baycfg = ISC_BAY_CFG_GBGB,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SGRBG8,
++ .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ .cfa_baycfg = ISC_BAY_CFG_GRGR,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SRGGB8,
++ .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ .cfa_baycfg = ISC_BAY_CFG_RGRG,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SBGGR10,
++ .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
++ .cfa_baycfg = ISC_BAY_CFG_RGRG,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SGBRG10,
++ .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
++ .cfa_baycfg = ISC_BAY_CFG_GBGB,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SGRBG10,
++ .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
++ .cfa_baycfg = ISC_BAY_CFG_GRGR,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SRGGB10,
++ .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
++ .cfa_baycfg = ISC_BAY_CFG_RGRG,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SBGGR12,
++ .mbus_code = MEDIA_BUS_FMT_SBGGR12_1X12,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
++ .cfa_baycfg = ISC_BAY_CFG_BGBG,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SGBRG12,
++ .mbus_code = MEDIA_BUS_FMT_SGBRG12_1X12,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
++ .cfa_baycfg = ISC_BAY_CFG_GBGB,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SGRBG12,
++ .mbus_code = MEDIA_BUS_FMT_SGRBG12_1X12,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
++ .cfa_baycfg = ISC_BAY_CFG_GRGR,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SRGGB12,
++ .mbus_code = MEDIA_BUS_FMT_SRGGB12_1X12,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
++ .cfa_baycfg = ISC_BAY_CFG_RGRG,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_GREY,
++ .mbus_code = MEDIA_BUS_FMT_Y8_1X8,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_YUYV,
++ .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_RGB565,
++ .mbus_code = MEDIA_BUS_FMT_RGB565_2X8_LE,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_Y10,
++ .mbus_code = MEDIA_BUS_FMT_Y10_1X10,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
++ },
++
++};
++
+ static void isc_sama5d2_config_csc(struct isc_device *isc)
+ {
+ struct regmap *regmap = isc->regmap;
+@@ -310,6 +441,11 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->offsets.version = ISC_SAMA5D2_VERSION_OFFSET;
+ isc->offsets.his_entry = ISC_SAMA5D2_HIS_ENTRY_OFFSET;
+
++ isc->controller_formats = sama5d2_controller_formats;
++ isc->controller_formats_size = ARRAY_SIZE(sama5d2_controller_formats);
++ isc->formats_list = sama5d2_formats_list;
++ isc->formats_list_size = ARRAY_SIZE(sama5d2_formats_list);
++
+ /* sama5d2-isc - 8 bits per beat */
+ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS8 | ISC_DCFG_CMBSIZE_BEATS8;
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/181-media-atmel-atmel-isc-create-an-adapt-pipeline-callb.patch b/target/linux/at91/patches-5.10/181-media-atmel-atmel-isc-create-an-adapt-pipeline-callb.patch
new file mode 100644
index 0000000000..66c70e4ca3
--- /dev/null
+++ b/target/linux/at91/patches-5.10/181-media-atmel-atmel-isc-create-an-adapt-pipeline-callb.patch
@@ -0,0 +1,98 @@
+From 8601f1fc0a9a22788bfa6369fbbf83b3828a5b42 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:23 +0200
+Subject: [PATCH 181/247] media: atmel: atmel-isc: create an adapt pipeline
+ callback for product specific
+
+Once the pipeline is set in the base code, create a callback that will adapt
+the ISC pipeline to each product.
+Create the adapt_pipeline callback that will be used in this fashion.
+
+[hverkuil: made isc_sama5d2_adapt_pipeline static]
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 4 ++++
+ drivers/media/platform/atmel/atmel-isc.h | 5 +++++
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 11 +++++++++++
+ 3 files changed, 20 insertions(+)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 90a62d43fdb1..7862d6bf850d 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -1059,6 +1059,10 @@ static int isc_try_configure_pipeline(struct isc_device *isc)
+ default:
+ isc->try_config.bits_pipeline = 0x0;
+ }
++
++ /* Tune the pipeline to product specific */
++ isc->adapt_pipeline(isc);
++
+ return 0;
+ }
+
+diff --git a/drivers/media/platform/atmel/atmel-isc.h b/drivers/media/platform/atmel/atmel-isc.h
+index b34737c09a5b..f59b2426ae74 100644
+--- a/drivers/media/platform/atmel/atmel-isc.h
++++ b/drivers/media/platform/atmel/atmel-isc.h
+@@ -235,6 +235,9 @@ struct isc_reg_offsets {
+ * @config_ctrls: pointer to a functoin that initializes product
+ * specific v4l2 controls.
+ *
++ * @adapt_pipeline: pointer to a function that adapts the pipeline bits
++ * to the product specific pipeline
++ *
+ * @offsets: struct holding the product specific register offsets
+ * @controller_formats: pointer to the array of possible formats that the
+ * controller can output
+@@ -320,6 +323,8 @@ struct isc_device {
+
+ void (*config_ctrls)(struct isc_device *isc,
+ const struct v4l2_ctrl_ops *ops);
++
++ void (*adapt_pipeline)(struct isc_device *isc);
+ };
+
+ struct isc_reg_offsets offsets;
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index b8c1b57ed820..26c971a380ca 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -54,6 +54,10 @@
+
+ #define ISC_CLK_MAX_DIV 255
+
++#define ISC_SAMA5D2_PIPELINE \
++ (WB_ENABLE | CFA_ENABLE | CC_ENABLE | GAM_ENABLES | CSC_ENABLE | \
++ CBC_ENABLE | SUB422_ENABLE | SUB420_ENABLE)
++
+ /* This is a list of the formats that the ISC can *output* */
+ static const struct isc_format sama5d2_controller_formats[] = {
+ {
+@@ -257,6 +261,11 @@ static void isc_sama5d2_config_rlp(struct isc_device *isc)
+ ISC_RLP_CFG_MODE_MASK, rlp_mode);
+ }
+
++static void isc_sama5d2_adapt_pipeline(struct isc_device *isc)
++{
++ isc->try_config.bits_pipeline &= ISC_SAMA5D2_PIPELINE;
++}
++
+ /* Gamma table with gamma 1/2.2 */
+ static const u32 isc_sama5d2_gamma_table[][GAMMA_ENTRIES] = {
+ /* 0 --> gamma 1/1.8 */
+@@ -431,6 +440,8 @@ static int atmel_isc_probe(struct platform_device *pdev)
+ isc->config_rlp = isc_sama5d2_config_rlp;
+ isc->config_ctrls = isc_sama5d2_config_ctrls;
+
++ isc->adapt_pipeline = isc_sama5d2_adapt_pipeline;
++
+ isc->offsets.csc = ISC_SAMA5D2_CSC_OFFSET;
+ isc->offsets.cbc = ISC_SAMA5D2_CBC_OFFSET;
+ isc->offsets.sub422 = ISC_SAMA5D2_SUB422_OFFSET;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/182-media-atmel-atmel-isc-regs-add-additional-fields-for.patch b/target/linux/at91/patches-5.10/182-media-atmel-atmel-isc-regs-add-additional-fields-for.patch
new file mode 100644
index 0000000000..e2a79bb7e3
--- /dev/null
+++ b/target/linux/at91/patches-5.10/182-media-atmel-atmel-isc-regs-add-additional-fields-for.patch
@@ -0,0 +1,60 @@
+From bf032d1a0105939b90072914d88181fbe6187f43 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:24 +0200
+Subject: [PATCH 182/247] media: atmel: atmel-isc-regs: add additional fields
+ for sama7g5 type pipeline
+
+Add additional fields for registers present in sama7g5 type pipeline.
+Extend register masks for additional bits in sama7g5 type pipeline registers.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-regs.h | 16 ++++++++++++++--
+ 1 file changed, 14 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
+index 457eed74cda9..5f99bf7717c1 100644
+--- a/drivers/media/platform/atmel/atmel-isc-regs.h
++++ b/drivers/media/platform/atmel/atmel-isc-regs.h
+@@ -289,8 +289,18 @@
+ #define ISC_RLP_CFG_MODE_ARGB32 0xa
+ #define ISC_RLP_CFG_MODE_YYCC 0xb
+ #define ISC_RLP_CFG_MODE_YYCC_LIMITED 0xc
++#define ISC_RLP_CFG_MODE_YCYC 0xd
+ #define ISC_RLP_CFG_MODE_MASK GENMASK(3, 0)
+
++#define ISC_RLP_CFG_LSH BIT(5)
++
++#define ISC_RLP_CFG_YMODE_YUYV (3 << 6)
++#define ISC_RLP_CFG_YMODE_YVYU (2 << 6)
++#define ISC_RLP_CFG_YMODE_VYUY (0 << 6)
++#define ISC_RLP_CFG_YMODE_UYVY (1 << 6)
++
++#define ISC_RLP_CFG_YMODE_MASK GENMASK(7, 6)
++
+ /* Offset for HIS register specific to sama5d2 product */
+ #define ISC_SAMA5D2_HIS_OFFSET 0
+ /* Histogram Control Register */
+@@ -332,13 +342,15 @@
+ #define ISC_DCFG_YMBSIZE_BEATS4 (0x1 << 4)
+ #define ISC_DCFG_YMBSIZE_BEATS8 (0x2 << 4)
+ #define ISC_DCFG_YMBSIZE_BEATS16 (0x3 << 4)
+-#define ISC_DCFG_YMBSIZE_MASK GENMASK(5, 4)
++#define ISC_DCFG_YMBSIZE_BEATS32 (0x4 << 4)
++#define ISC_DCFG_YMBSIZE_MASK GENMASK(6, 4)
+
+ #define ISC_DCFG_CMBSIZE_SINGLE (0x0 << 8)
+ #define ISC_DCFG_CMBSIZE_BEATS4 (0x1 << 8)
+ #define ISC_DCFG_CMBSIZE_BEATS8 (0x2 << 8)
+ #define ISC_DCFG_CMBSIZE_BEATS16 (0x3 << 8)
+-#define ISC_DCFG_CMBSIZE_MASK GENMASK(9, 8)
++#define ISC_DCFG_CMBSIZE_BEATS32 (0x4 << 8)
++#define ISC_DCFG_CMBSIZE_MASK GENMASK(10, 8)
+
+ /* DMA Control Register */
+ #define ISC_DCTRL 0x000003e4
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/183-media-atmel-atmel-isc-base-add-support-for-more-form.patch b/target/linux/at91/patches-5.10/183-media-atmel-atmel-isc-base-add-support-for-more-form.patch
new file mode 100644
index 0000000000..4b530134a1
--- /dev/null
+++ b/target/linux/at91/patches-5.10/183-media-atmel-atmel-isc-base-add-support-for-more-form.patch
@@ -0,0 +1,150 @@
+From fa9e6cd8f3ba4a277c06e4c1fb01cd69b3a57234 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:25 +0200
+Subject: [PATCH 183/247] media: atmel: atmel-isc-base: add support for more
+ formats and additional pipeline modules
+
+Add support for additional formats supported by newer pipelines, and for
+additional pipeline modules.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-isc-base.c | 48 +++++++++++++++----
+ 1 file changed, 38 insertions(+), 10 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 7862d6bf850d..dcb321ad10b8 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -855,6 +855,8 @@ static int isc_try_validate_formats(struct isc_device *isc)
+ case V4L2_PIX_FMT_YUV420:
+ case V4L2_PIX_FMT_YUV422P:
+ case V4L2_PIX_FMT_YUYV:
++ case V4L2_PIX_FMT_UYVY:
++ case V4L2_PIX_FMT_VYUY:
+ ret = 0;
+ yuv = true;
+ break;
+@@ -869,6 +871,7 @@ static int isc_try_validate_formats(struct isc_device *isc)
+ break;
+ case V4L2_PIX_FMT_GREY:
+ case V4L2_PIX_FMT_Y10:
++ case V4L2_PIX_FMT_Y16:
+ ret = 0;
+ grey = true;
+ break;
+@@ -899,6 +902,8 @@ static int isc_try_validate_formats(struct isc_device *isc)
+ */
+ static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump)
+ {
++ isc->try_config.rlp_cfg_mode = 0;
++
+ switch (isc->try_config.fourcc) {
+ case V4L2_PIX_FMT_SBGGR8:
+ case V4L2_PIX_FMT_SGBRG8:
+@@ -965,7 +970,19 @@ static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump)
+ isc->try_config.bpp = 16;
+ break;
+ case V4L2_PIX_FMT_YUYV:
+- isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YYCC;
++ isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_YUYV;
++ isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32;
++ isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED;
++ isc->try_config.bpp = 16;
++ break;
++ case V4L2_PIX_FMT_UYVY:
++ isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_UYVY;
++ isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32;
++ isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED;
++ isc->try_config.bpp = 16;
++ break;
++ case V4L2_PIX_FMT_VYUY:
++ isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_YCYC | ISC_RLP_CFG_YMODE_VYUY;
+ isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED32;
+ isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED;
+ isc->try_config.bpp = 16;
+@@ -976,8 +993,11 @@ static int isc_try_configure_rlp_dma(struct isc_device *isc, bool direct_dump)
+ isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED;
+ isc->try_config.bpp = 8;
+ break;
++ case V4L2_PIX_FMT_Y16:
++ isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY10 | ISC_RLP_CFG_LSH;
++ fallthrough;
+ case V4L2_PIX_FMT_Y10:
+- isc->try_config.rlp_cfg_mode = ISC_RLP_CFG_MODE_DATY10;
++ isc->try_config.rlp_cfg_mode |= ISC_RLP_CFG_MODE_DATY10;
+ isc->try_config.dcfg_imode = ISC_DCFG_IMODE_PACKED16;
+ isc->try_config.dctrl_dview = ISC_DCTRL_DVIEW_PACKED;
+ isc->try_config.bpp = 16;
+@@ -1011,7 +1031,8 @@ static int isc_try_configure_pipeline(struct isc_device *isc)
+ /* if sensor format is RAW, we convert inside ISC */
+ if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
+ isc->try_config.bits_pipeline = CFA_ENABLE |
+- WB_ENABLE | GAM_ENABLES;
++ WB_ENABLE | GAM_ENABLES | DPC_BLCENABLE |
++ CC_ENABLE;
+ } else {
+ isc->try_config.bits_pipeline = 0x0;
+ }
+@@ -1020,8 +1041,9 @@ static int isc_try_configure_pipeline(struct isc_device *isc)
+ /* if sensor format is RAW, we convert inside ISC */
+ if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
+ isc->try_config.bits_pipeline = CFA_ENABLE |
+- CSC_ENABLE | WB_ENABLE | GAM_ENABLES |
+- SUB420_ENABLE | SUB422_ENABLE | CBC_ENABLE;
++ CSC_ENABLE | GAM_ENABLES | WB_ENABLE |
++ SUB420_ENABLE | SUB422_ENABLE | CBC_ENABLE |
++ DPC_BLCENABLE;
+ } else {
+ isc->try_config.bits_pipeline = 0x0;
+ }
+@@ -1031,33 +1053,39 @@ static int isc_try_configure_pipeline(struct isc_device *isc)
+ if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
+ isc->try_config.bits_pipeline = CFA_ENABLE |
+ CSC_ENABLE | WB_ENABLE | GAM_ENABLES |
+- SUB422_ENABLE | CBC_ENABLE;
++ SUB422_ENABLE | CBC_ENABLE | DPC_BLCENABLE;
+ } else {
+ isc->try_config.bits_pipeline = 0x0;
+ }
+ break;
+ case V4L2_PIX_FMT_YUYV:
++ case V4L2_PIX_FMT_UYVY:
++ case V4L2_PIX_FMT_VYUY:
+ /* if sensor format is RAW, we convert inside ISC */
+ if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
+ isc->try_config.bits_pipeline = CFA_ENABLE |
+ CSC_ENABLE | WB_ENABLE | GAM_ENABLES |
+- SUB422_ENABLE | CBC_ENABLE;
++ SUB422_ENABLE | CBC_ENABLE | DPC_BLCENABLE;
+ } else {
+ isc->try_config.bits_pipeline = 0x0;
+ }
+ break;
+ case V4L2_PIX_FMT_GREY:
+- if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
++ case V4L2_PIX_FMT_Y16:
+ /* if sensor format is RAW, we convert inside ISC */
++ if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code)) {
+ isc->try_config.bits_pipeline = CFA_ENABLE |
+ CSC_ENABLE | WB_ENABLE | GAM_ENABLES |
+- CBC_ENABLE;
++ CBC_ENABLE | DPC_BLCENABLE;
+ } else {
+ isc->try_config.bits_pipeline = 0x0;
+ }
+ break;
+ default:
+- isc->try_config.bits_pipeline = 0x0;
++ if (ISC_IS_FORMAT_RAW(isc->try_config.sd_format->mbus_code))
++ isc->try_config.bits_pipeline = WB_ENABLE | DPC_BLCENABLE;
++ else
++ isc->try_config.bits_pipeline = 0x0;
+ }
+
+ /* Tune the pipeline to product specific */
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/184-media-atmel-atmel-isc-sama5d2-remove-duplicate-defin.patch b/target/linux/at91/patches-5.10/184-media-atmel-atmel-isc-sama5d2-remove-duplicate-defin.patch
new file mode 100644
index 0000000000..ea11e15654
--- /dev/null
+++ b/target/linux/at91/patches-5.10/184-media-atmel-atmel-isc-sama5d2-remove-duplicate-defin.patch
@@ -0,0 +1,31 @@
+From b36d11efc134f9f1e2804270d08b9dbefdee4a0d Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:26 +0200
+Subject: [PATCH 184/247] media: atmel: atmel-isc-sama5d2: remove duplicate
+ define
+
+Remove a duplicate definition of clock max divider
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/atmel-sama5d2-isc.c | 2 --
+ 1 file changed, 2 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index 26c971a380ca..d6fd22b127fd 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -52,8 +52,6 @@
+ #define ISC_SAMA5D2_MAX_SUPPORT_WIDTH 2592
+ #define ISC_SAMA5D2_MAX_SUPPORT_HEIGHT 1944
+
+-#define ISC_CLK_MAX_DIV 255
+-
+ #define ISC_SAMA5D2_PIPELINE \
+ (WB_ENABLE | CFA_ENABLE | CC_ENABLE | GAM_ENABLES | CSC_ENABLE | \
+ CBC_ENABLE | SUB422_ENABLE | SUB420_ENABLE)
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/185-media-atmel-atmel-isc-add-microchip-xisc-driver.patch b/target/linux/at91/patches-5.10/185-media-atmel-atmel-isc-add-microchip-xisc-driver.patch
new file mode 100644
index 0000000000..f09443237c
--- /dev/null
+++ b/target/linux/at91/patches-5.10/185-media-atmel-atmel-isc-add-microchip-xisc-driver.patch
@@ -0,0 +1,826 @@
+From 74fd7ea680cb1a3a43b51a7279aea45efdf9ec42 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Tue, 13 Apr 2021 12:57:29 +0200
+Subject: [PATCH 185/247] media: atmel: atmel-isc: add microchip-xisc driver
+
+Add driver for the extended variant of the isc, the microchip XISC
+present on sama7g5 product.
+
+[hverkuil: drop MODULE_SUPPORTED_DEVICE, no longer exists]
+[hverkuil: made isc_sama7g5_config_csc et al static]
+[hverkuil: made sama7g5_controller_formats et al static]
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/Makefile | 1 +
+ drivers/media/platform/atmel/Kconfig | 11 +
+ drivers/media/platform/atmel/Makefile | 2 +
+ drivers/media/platform/atmel/atmel-isc-base.c | 2 +-
+ drivers/media/platform/atmel/atmel-isc-regs.h | 26 +
+ .../media/platform/atmel/atmel-sama7g5-isc.c | 630 ++++++++++++++++++
+ 6 files changed, 671 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/media/platform/atmel/atmel-sama7g5-isc.c
+
+diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
+index 62b6cdc8c730..fd15c76402c9 100644
+--- a/drivers/media/platform/Makefile
++++ b/drivers/media/platform/Makefile
+@@ -64,6 +64,7 @@ obj-$(CONFIG_VIDEO_RCAR_VIN) += rcar-vin/
+
+ obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel/
+ obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel/
++obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel/
+
+ obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32/
+
+diff --git a/drivers/media/platform/atmel/Kconfig b/drivers/media/platform/atmel/Kconfig
+index 1850fe7f9360..99b51213f871 100644
+--- a/drivers/media/platform/atmel/Kconfig
++++ b/drivers/media/platform/atmel/Kconfig
+@@ -12,6 +12,17 @@ config VIDEO_ATMEL_ISC
+ This module makes the ATMEL Image Sensor Controller available
+ as a v4l2 device.
+
++config VIDEO_ATMEL_XISC
++ tristate "ATMEL eXtended Image Sensor Controller (XISC) support"
++ depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API
++ depends on ARCH_AT91 || COMPILE_TEST
++ select VIDEOBUF2_DMA_CONTIG
++ select REGMAP_MMIO
++ select V4L2_FWNODE
++ help
++ This module makes the ATMEL eXtended Image Sensor Controller
++ available as a v4l2 device.
++
+ config VIDEO_ATMEL_ISI
+ tristate "ATMEL Image Sensor Interface (ISI) support"
+ depends on VIDEO_V4L2 && OF
+diff --git a/drivers/media/platform/atmel/Makefile b/drivers/media/platform/atmel/Makefile
+index 2dba38994a70..c5c01556c653 100644
+--- a/drivers/media/platform/atmel/Makefile
++++ b/drivers/media/platform/atmel/Makefile
+@@ -1,5 +1,7 @@
+ # SPDX-License-Identifier: GPL-2.0-only
+ atmel-isc-objs = atmel-sama5d2-isc.o atmel-isc-base.o
++atmel-xisc-objs = atmel-sama7g5-isc.o atmel-isc-base.o
+
+ obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
+ obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel-isc.o
++obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel-xisc.o
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index dcb321ad10b8..46c6e3e20f33 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -600,7 +600,7 @@ static int isc_configure(struct isc_device *isc)
+ mask = ISC_PFE_CFG0_BPS_MASK | ISC_PFE_CFG0_HPOL_LOW |
+ ISC_PFE_CFG0_VPOL_LOW | ISC_PFE_CFG0_PPOL_LOW |
+ ISC_PFE_CFG0_MODE_MASK | ISC_PFE_CFG0_CCIR_CRC |
+- ISC_PFE_CFG0_CCIR656;
++ ISC_PFE_CFG0_CCIR656 | ISC_PFE_CFG0_MIPI;
+
+ regmap_update_bits(regmap, ISC_PFE_CFG0, mask, pfe_cfg0);
+
+diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
+index 5f99bf7717c1..d06b72228d4f 100644
+--- a/drivers/media/platform/atmel/atmel-isc-regs.h
++++ b/drivers/media/platform/atmel/atmel-isc-regs.h
+@@ -26,6 +26,7 @@
+ #define ISC_PFE_CFG0_PPOL_LOW BIT(2)
+ #define ISC_PFE_CFG0_CCIR656 BIT(9)
+ #define ISC_PFE_CFG0_CCIR_CRC BIT(10)
++#define ISC_PFE_CFG0_MIPI BIT(14)
+
+ #define ISC_PFE_CFG0_MODE_PROGRESSIVE (0x0 << 4)
+ #define ISC_PFE_CFG0_MODE_MASK GENMASK(6, 4)
+@@ -184,6 +185,8 @@
+ /* ISC Gamma Correction Control Register */
+ #define ISC_GAM_CTRL 0x00000094
+
++#define ISC_GAM_CTRL_BIPART BIT(4)
++
+ /* ISC_Gamma Correction Blue Entry Register */
+ #define ISC_GAM_BENTRY 0x00000098
+
+@@ -222,6 +225,8 @@
+
+ /* Offset for CSC register specific to sama5d2 product */
+ #define ISC_SAMA5D2_CSC_OFFSET 0
++/* Offset for CSC register specific to sama7g5 product */
++#define ISC_SAMA7G5_CSC_OFFSET 0x11c
+
+ /* Color Space Conversion Control Register */
+ #define ISC_CSC_CTRL 0x00000398
+@@ -246,6 +251,8 @@
+
+ /* Offset for CBC register specific to sama5d2 product */
+ #define ISC_SAMA5D2_CBC_OFFSET 0
++/* Offset for CBC register specific to sama7g5 product */
++#define ISC_SAMA7G5_CBC_OFFSET 0x11c
+
+ /* Contrast And Brightness Control Register */
+ #define ISC_CBC_CTRL 0x000003b4
+@@ -261,18 +268,30 @@
+ #define ISC_CBC_CONTRAST 0x000003c0
+ #define ISC_CBC_CONTRAST_MASK GENMASK(11, 0)
+
++/* Hue Register */
++#define ISC_CBCHS_HUE 0x4e0
++/* Saturation Register */
++#define ISC_CBCHS_SAT 0x4e4
++
+ /* Offset for SUB422 register specific to sama5d2 product */
+ #define ISC_SAMA5D2_SUB422_OFFSET 0
++/* Offset for SUB422 register specific to sama7g5 product */
++#define ISC_SAMA7G5_SUB422_OFFSET 0x124
++
+ /* Subsampling 4:4:4 to 4:2:2 Control Register */
+ #define ISC_SUB422_CTRL 0x000003c4
+
+ /* Offset for SUB420 register specific to sama5d2 product */
+ #define ISC_SAMA5D2_SUB420_OFFSET 0
++/* Offset for SUB420 register specific to sama7g5 product */
++#define ISC_SAMA7G5_SUB420_OFFSET 0x124
+ /* Subsampling 4:2:2 to 4:2:0 Control Register */
+ #define ISC_SUB420_CTRL 0x000003cc
+
+ /* Offset for RLP register specific to sama5d2 product */
+ #define ISC_SAMA5D2_RLP_OFFSET 0
++/* Offset for RLP register specific to sama7g5 product */
++#define ISC_SAMA7G5_RLP_OFFSET 0x124
+ /* Rounding, Limiting and Packing Configuration Register */
+ #define ISC_RLP_CFG 0x000003d0
+
+@@ -303,6 +322,8 @@
+
+ /* Offset for HIS register specific to sama5d2 product */
+ #define ISC_SAMA5D2_HIS_OFFSET 0
++/* Offset for HIS register specific to sama7g5 product */
++#define ISC_SAMA7G5_HIS_OFFSET 0x124
+ /* Histogram Control Register */
+ #define ISC_HIS_CTRL 0x000003d4
+
+@@ -326,6 +347,8 @@
+
+ /* Offset for DMA register specific to sama5d2 product */
+ #define ISC_SAMA5D2_DMA_OFFSET 0
++/* Offset for DMA register specific to sama7g5 product */
++#define ISC_SAMA7G5_DMA_OFFSET 0x13c
+
+ /* DMA Configuration Register */
+ #define ISC_DCFG 0x000003e0
+@@ -376,11 +399,14 @@
+
+ /* Offset for version register specific to sama5d2 product */
+ #define ISC_SAMA5D2_VERSION_OFFSET 0
++#define ISC_SAMA7G5_VERSION_OFFSET 0x13c
+ /* Version Register */
+ #define ISC_VERSION 0x0000040c
+
+ /* Offset for version register specific to sama5d2 product */
+ #define ISC_SAMA5D2_HIS_ENTRY_OFFSET 0
++/* Offset for version register specific to sama7g5 product */
++#define ISC_SAMA7G5_HIS_ENTRY_OFFSET 0x14c
+ /* Histogram Entry */
+ #define ISC_HIS_ENTRY 0x00000410
+
+diff --git a/drivers/media/platform/atmel/atmel-sama7g5-isc.c b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
+new file mode 100644
+index 000000000000..f2785131ff56
+--- /dev/null
++++ b/drivers/media/platform/atmel/atmel-sama7g5-isc.c
+@@ -0,0 +1,630 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Microchip eXtended Image Sensor Controller (XISC) driver
++ *
++ * Copyright (C) 2019-2021 Microchip Technology, Inc. and its subsidiaries
++ *
++ * Author: Eugen Hristev <eugen.hristev@microchip.com>
++ *
++ * Sensor-->PFE-->DPC-->WB-->CFA-->CC-->GAM-->VHXS-->CSC-->CBHS-->SUB-->RLP-->DMA-->HIS
++ *
++ * ISC video pipeline integrates the following submodules:
++ * PFE: Parallel Front End to sample the camera sensor input stream
++ * DPC: Defective Pixel Correction with black offset correction, green disparity
++ * correction and defective pixel correction (3 modules total)
++ * WB: Programmable white balance in the Bayer domain
++ * CFA: Color filter array interpolation module
++ * CC: Programmable color correction
++ * GAM: Gamma correction
++ *VHXS: Vertical and Horizontal Scaler
++ * CSC: Programmable color space conversion
++ *CBHS: Contrast Brightness Hue and Saturation control
++ * SUB: This module performs YCbCr444 to YCbCr420 chrominance subsampling
++ * RLP: This module performs rounding, range limiting
++ * and packing of the incoming data
++ * DMA: This module performs DMA master accesses to write frames to external RAM
++ * HIS: Histogram module performs statistic counters on the frames
++ */
++
++#include <linux/clk.h>
++#include <linux/clkdev.h>
++#include <linux/clk-provider.h>
++#include <linux/delay.h>
++#include <linux/interrupt.h>
++#include <linux/math64.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/of_graph.h>
++#include <linux/platform_device.h>
++#include <linux/pm_runtime.h>
++#include <linux/regmap.h>
++#include <linux/videodev2.h>
++
++#include <media/v4l2-ctrls.h>
++#include <media/v4l2-device.h>
++#include <media/v4l2-event.h>
++#include <media/v4l2-image-sizes.h>
++#include <media/v4l2-ioctl.h>
++#include <media/v4l2-fwnode.h>
++#include <media/v4l2-subdev.h>
++#include <media/videobuf2-dma-contig.h>
++
++#include "atmel-isc-regs.h"
++#include "atmel-isc.h"
++
++#define ISC_SAMA7G5_MAX_SUPPORT_WIDTH 3264
++#define ISC_SAMA7G5_MAX_SUPPORT_HEIGHT 2464
++
++#define ISC_SAMA7G5_PIPELINE \
++ (WB_ENABLE | CFA_ENABLE | CC_ENABLE | GAM_ENABLES | CSC_ENABLE | \
++ CBC_ENABLE | SUB422_ENABLE | SUB420_ENABLE)
++
++/* This is a list of the formats that the ISC can *output* */
++static const struct isc_format sama7g5_controller_formats[] = {
++ {
++ .fourcc = V4L2_PIX_FMT_ARGB444,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_ARGB555,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_RGB565,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_ABGR32,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_XBGR32,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_YUV420,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_UYVY,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_VYUY,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_YUYV,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_YUV422P,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_GREY,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_Y10,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_Y16,
++ },
++};
++
++/* This is a list of formats that the ISC can receive as *input* */
++static struct isc_format sama7g5_formats_list[] = {
++ {
++ .fourcc = V4L2_PIX_FMT_SBGGR8,
++ .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ .cfa_baycfg = ISC_BAY_CFG_BGBG,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SGBRG8,
++ .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ .cfa_baycfg = ISC_BAY_CFG_GBGB,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SGRBG8,
++ .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ .cfa_baycfg = ISC_BAY_CFG_GRGR,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SRGGB8,
++ .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ .cfa_baycfg = ISC_BAY_CFG_RGRG,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SBGGR10,
++ .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
++ .cfa_baycfg = ISC_BAY_CFG_RGRG,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SGBRG10,
++ .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
++ .cfa_baycfg = ISC_BAY_CFG_GBGB,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SGRBG10,
++ .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
++ .cfa_baycfg = ISC_BAY_CFG_GRGR,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SRGGB10,
++ .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
++ .cfa_baycfg = ISC_BAY_CFG_RGRG,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SBGGR12,
++ .mbus_code = MEDIA_BUS_FMT_SBGGR12_1X12,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
++ .cfa_baycfg = ISC_BAY_CFG_BGBG,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SGBRG12,
++ .mbus_code = MEDIA_BUS_FMT_SGBRG12_1X12,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
++ .cfa_baycfg = ISC_BAY_CFG_GBGB,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SGRBG12,
++ .mbus_code = MEDIA_BUS_FMT_SGRBG12_1X12,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
++ .cfa_baycfg = ISC_BAY_CFG_GRGR,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_SRGGB12,
++ .mbus_code = MEDIA_BUS_FMT_SRGGB12_1X12,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TWELVE,
++ .cfa_baycfg = ISC_BAY_CFG_RGRG,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_GREY,
++ .mbus_code = MEDIA_BUS_FMT_Y8_1X8,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_YUYV,
++ .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_UYVY,
++ .mbus_code = MEDIA_BUS_FMT_YUYV8_2X8,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_RGB565,
++ .mbus_code = MEDIA_BUS_FMT_RGB565_2X8_LE,
++ .pfe_cfg0_bps = ISC_PFE_CFG0_BPS_EIGHT,
++ },
++ {
++ .fourcc = V4L2_PIX_FMT_Y10,
++ .mbus_code = MEDIA_BUS_FMT_Y10_1X10,
++ .pfe_cfg0_bps = ISC_PFG_CFG0_BPS_TEN,
++ },
++
++};
++
++static void isc_sama7g5_config_csc(struct isc_device *isc)
++{
++ struct regmap *regmap = isc->regmap;
++
++ /* Convert RGB to YUV */
++ regmap_write(regmap, ISC_CSC_YR_YG + isc->offsets.csc,
++ 0x42 | (0x81 << 16));
++ regmap_write(regmap, ISC_CSC_YB_OY + isc->offsets.csc,
++ 0x19 | (0x10 << 16));
++ regmap_write(regmap, ISC_CSC_CBR_CBG + isc->offsets.csc,
++ 0xFDA | (0xFB6 << 16));
++ regmap_write(regmap, ISC_CSC_CBB_OCB + isc->offsets.csc,
++ 0x70 | (0x80 << 16));
++ regmap_write(regmap, ISC_CSC_CRR_CRG + isc->offsets.csc,
++ 0x70 | (0xFA2 << 16));
++ regmap_write(regmap, ISC_CSC_CRB_OCR + isc->offsets.csc,
++ 0xFEE | (0x80 << 16));
++}
++
++static void isc_sama7g5_config_cbc(struct isc_device *isc)
++{
++ struct regmap *regmap = isc->regmap;
++
++ /* Configure what is set via v4l2 ctrls */
++ regmap_write(regmap, ISC_CBC_BRIGHT + isc->offsets.cbc, isc->ctrls.brightness);
++ regmap_write(regmap, ISC_CBC_CONTRAST + isc->offsets.cbc, isc->ctrls.contrast);
++ /* Configure Hue and Saturation as neutral midpoint */
++ regmap_write(regmap, ISC_CBCHS_HUE, 0);
++ regmap_write(regmap, ISC_CBCHS_SAT, (1 << 4));
++}
++
++static void isc_sama7g5_config_cc(struct isc_device *isc)
++{
++ struct regmap *regmap = isc->regmap;
++
++ /* Configure each register at the neutral fixed point 1.0 or 0.0 */
++ regmap_write(regmap, ISC_CC_RR_RG, (1 << 8));
++ regmap_write(regmap, ISC_CC_RB_OR, 0);
++ regmap_write(regmap, ISC_CC_GR_GG, (1 << 8) << 16);
++ regmap_write(regmap, ISC_CC_GB_OG, 0);
++ regmap_write(regmap, ISC_CC_BR_BG, 0);
++ regmap_write(regmap, ISC_CC_BB_OB, (1 << 8));
++}
++
++static void isc_sama7g5_config_ctrls(struct isc_device *isc,
++ const struct v4l2_ctrl_ops *ops)
++{
++ struct isc_ctrls *ctrls = &isc->ctrls;
++ struct v4l2_ctrl_handler *hdl = &ctrls->handler;
++
++ ctrls->contrast = 16;
++
++ v4l2_ctrl_new_std(hdl, ops, V4L2_CID_CONTRAST, -2048, 2047, 1, 16);
++}
++
++static void isc_sama7g5_config_dpc(struct isc_device *isc)
++{
++ u32 bay_cfg = isc->config.sd_format->cfa_baycfg;
++ struct regmap *regmap = isc->regmap;
++
++ regmap_update_bits(regmap, ISC_DPC_CFG, ISC_DPC_CFG_BLOFF_MASK,
++ (64 << ISC_DPC_CFG_BLOFF_SHIFT));
++ regmap_update_bits(regmap, ISC_DPC_CFG, ISC_DPC_CFG_BAYCFG_MASK,
++ (bay_cfg << ISC_DPC_CFG_BAYCFG_SHIFT));
++}
++
++static void isc_sama7g5_config_gam(struct isc_device *isc)
++{
++ struct regmap *regmap = isc->regmap;
++
++ regmap_update_bits(regmap, ISC_GAM_CTRL, ISC_GAM_CTRL_BIPART,
++ ISC_GAM_CTRL_BIPART);
++}
++
++static void isc_sama7g5_config_rlp(struct isc_device *isc)
++{
++ struct regmap *regmap = isc->regmap;
++ u32 rlp_mode = isc->config.rlp_cfg_mode;
++
++ regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp,
++ ISC_RLP_CFG_MODE_MASK | ISC_RLP_CFG_LSH |
++ ISC_RLP_CFG_YMODE_MASK, rlp_mode);
++}
++
++static void isc_sama7g5_adapt_pipeline(struct isc_device *isc)
++{
++ isc->try_config.bits_pipeline &= ISC_SAMA7G5_PIPELINE;
++}
++
++/* Gamma table with gamma 1/2.2 */
++static const u32 isc_sama7g5_gamma_table[][GAMMA_ENTRIES] = {
++ /* index 0 --> gamma bipartite */
++ {
++ 0x980, 0x4c0320, 0x650260, 0x7801e0, 0x8701a0, 0x940180,
++ 0xa00160, 0xab0120, 0xb40120, 0xbd0120, 0xc60100, 0xce0100,
++ 0xd600e0, 0xdd00e0, 0xe400e0, 0xeb00c0, 0xf100c0, 0xf700c0,
++ 0xfd00c0, 0x10300a0, 0x10800c0, 0x10e00a0, 0x11300a0, 0x11800a0,
++ 0x11d00a0, 0x12200a0, 0x12700a0, 0x12c0080, 0x13000a0, 0x1350080,
++ 0x13900a0, 0x13e0080, 0x1420076, 0x17d0062, 0x1ae0054, 0x1d8004a,
++ 0x1fd0044, 0x21f003e, 0x23e003a, 0x25b0036, 0x2760032, 0x28f0030,
++ 0x2a7002e, 0x2be002c, 0x2d4002c, 0x2ea0028, 0x2fe0028, 0x3120026,
++ 0x3250024, 0x3370024, 0x3490022, 0x35a0022, 0x36b0020, 0x37b0020,
++ 0x38b0020, 0x39b001e, 0x3aa001e, 0x3b9001c, 0x3c7001c, 0x3d5001c,
++ 0x3e3001c, 0x3f1001c, 0x3ff001a, 0x40c001a },
++};
++
++static int xisc_parse_dt(struct device *dev, struct isc_device *isc)
++{
++ struct device_node *np = dev->of_node;
++ struct device_node *epn = NULL;
++ struct isc_subdev_entity *subdev_entity;
++ unsigned int flags;
++ int ret;
++ bool mipi_mode;
++
++ INIT_LIST_HEAD(&isc->subdev_entities);
++
++ mipi_mode = of_property_read_bool(np, "microchip,mipi-mode");
++
++ while (1) {
++ struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 };
++
++ epn = of_graph_get_next_endpoint(np, epn);
++ if (!epn)
++ return 0;
++
++ ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(epn),
++ &v4l2_epn);
++ if (ret) {
++ ret = -EINVAL;
++ dev_err(dev, "Could not parse the endpoint\n");
++ break;
++ }
++
++ subdev_entity = devm_kzalloc(dev, sizeof(*subdev_entity),
++ GFP_KERNEL);
++ if (!subdev_entity) {
++ ret = -ENOMEM;
++ break;
++ }
++ subdev_entity->epn = epn;
++
++ flags = v4l2_epn.bus.parallel.flags;
++
++ if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
++ subdev_entity->pfe_cfg0 = ISC_PFE_CFG0_HPOL_LOW;
++
++ if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
++ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_VPOL_LOW;
++
++ if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
++ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_PPOL_LOW;
++
++ if (v4l2_epn.bus_type == V4L2_MBUS_BT656)
++ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_CCIR_CRC |
++ ISC_PFE_CFG0_CCIR656;
++
++ if (mipi_mode)
++ subdev_entity->pfe_cfg0 |= ISC_PFE_CFG0_MIPI;
++
++ list_add_tail(&subdev_entity->list, &isc->subdev_entities);
++ }
++ of_node_put(epn);
++
++ return ret;
++}
++
++static int microchip_xisc_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct isc_device *isc;
++ struct resource *res;
++ void __iomem *io_base;
++ struct isc_subdev_entity *subdev_entity;
++ int irq;
++ int ret;
++ u32 ver;
++
++ isc = devm_kzalloc(dev, sizeof(*isc), GFP_KERNEL);
++ if (!isc)
++ return -ENOMEM;
++
++ platform_set_drvdata(pdev, isc);
++ isc->dev = dev;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ io_base = devm_ioremap_resource(dev, res);
++ if (IS_ERR(io_base))
++ return PTR_ERR(io_base);
++
++ isc->regmap = devm_regmap_init_mmio(dev, io_base, &isc_regmap_config);
++ if (IS_ERR(isc->regmap)) {
++ ret = PTR_ERR(isc->regmap);
++ dev_err(dev, "failed to init register map: %d\n", ret);
++ return ret;
++ }
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ ret = devm_request_irq(dev, irq, isc_interrupt, 0,
++ "microchip-sama7g5-xisc", isc);
++ if (ret < 0) {
++ dev_err(dev, "can't register ISR for IRQ %u (ret=%i)\n",
++ irq, ret);
++ return ret;
++ }
++
++ isc->gamma_table = isc_sama7g5_gamma_table;
++ isc->gamma_max = 0;
++
++ isc->max_width = ISC_SAMA7G5_MAX_SUPPORT_WIDTH;
++ isc->max_height = ISC_SAMA7G5_MAX_SUPPORT_HEIGHT;
++
++ isc->config_dpc = isc_sama7g5_config_dpc;
++ isc->config_csc = isc_sama7g5_config_csc;
++ isc->config_cbc = isc_sama7g5_config_cbc;
++ isc->config_cc = isc_sama7g5_config_cc;
++ isc->config_gam = isc_sama7g5_config_gam;
++ isc->config_rlp = isc_sama7g5_config_rlp;
++ isc->config_ctrls = isc_sama7g5_config_ctrls;
++
++ isc->adapt_pipeline = isc_sama7g5_adapt_pipeline;
++
++ isc->offsets.csc = ISC_SAMA7G5_CSC_OFFSET;
++ isc->offsets.cbc = ISC_SAMA7G5_CBC_OFFSET;
++ isc->offsets.sub422 = ISC_SAMA7G5_SUB422_OFFSET;
++ isc->offsets.sub420 = ISC_SAMA7G5_SUB420_OFFSET;
++ isc->offsets.rlp = ISC_SAMA7G5_RLP_OFFSET;
++ isc->offsets.his = ISC_SAMA7G5_HIS_OFFSET;
++ isc->offsets.dma = ISC_SAMA7G5_DMA_OFFSET;
++ isc->offsets.version = ISC_SAMA7G5_VERSION_OFFSET;
++ isc->offsets.his_entry = ISC_SAMA7G5_HIS_ENTRY_OFFSET;
++
++ isc->controller_formats = sama7g5_controller_formats;
++ isc->controller_formats_size = ARRAY_SIZE(sama7g5_controller_formats);
++ isc->formats_list = sama7g5_formats_list;
++ isc->formats_list_size = ARRAY_SIZE(sama7g5_formats_list);
++
++ /* sama7g5-isc RAM access port is full AXI4 - 32 bits per beat */
++ isc->dcfg = ISC_DCFG_YMBSIZE_BEATS32 | ISC_DCFG_CMBSIZE_BEATS32;
++
++ ret = isc_pipeline_init(isc);
++ if (ret)
++ return ret;
++
++ isc->hclock = devm_clk_get(dev, "hclock");
++ if (IS_ERR(isc->hclock)) {
++ ret = PTR_ERR(isc->hclock);
++ dev_err(dev, "failed to get hclock: %d\n", ret);
++ return ret;
++ }
++
++ ret = clk_prepare_enable(isc->hclock);
++ if (ret) {
++ dev_err(dev, "failed to enable hclock: %d\n", ret);
++ return ret;
++ }
++
++ ret = isc_clk_init(isc);
++ if (ret) {
++ dev_err(dev, "failed to init isc clock: %d\n", ret);
++ goto unprepare_hclk;
++ }
++
++ isc->ispck = isc->isc_clks[ISC_ISPCK].clk;
++
++ ret = clk_prepare_enable(isc->ispck);
++ if (ret) {
++ dev_err(dev, "failed to enable ispck: %d\n", ret);
++ goto unprepare_hclk;
++ }
++
++ /* ispck should be greater or equal to hclock */
++ ret = clk_set_rate(isc->ispck, clk_get_rate(isc->hclock));
++ if (ret) {
++ dev_err(dev, "failed to set ispck rate: %d\n", ret);
++ goto unprepare_clk;
++ }
++
++ ret = v4l2_device_register(dev, &isc->v4l2_dev);
++ if (ret) {
++ dev_err(dev, "unable to register v4l2 device.\n");
++ goto unprepare_clk;
++ }
++
++ ret = xisc_parse_dt(dev, isc);
++ if (ret) {
++ dev_err(dev, "fail to parse device tree\n");
++ goto unregister_v4l2_device;
++ }
++
++ if (list_empty(&isc->subdev_entities)) {
++ dev_err(dev, "no subdev found\n");
++ ret = -ENODEV;
++ goto unregister_v4l2_device;
++ }
++
++ list_for_each_entry(subdev_entity, &isc->subdev_entities, list) {
++ struct v4l2_async_subdev *asd;
++
++ v4l2_async_notifier_init(&subdev_entity->notifier);
++
++ asd = v4l2_async_notifier_add_fwnode_remote_subdev(
++ &subdev_entity->notifier,
++ of_fwnode_handle(subdev_entity->epn),
++ struct v4l2_async_subdev);
++
++ of_node_put(subdev_entity->epn);
++ subdev_entity->epn = NULL;
++
++ if (IS_ERR(asd)) {
++ ret = PTR_ERR(asd);
++ goto cleanup_subdev;
++ }
++
++ subdev_entity->notifier.ops = &isc_async_ops;
++
++ ret = v4l2_async_notifier_register(&isc->v4l2_dev,
++ &subdev_entity->notifier);
++ if (ret) {
++ dev_err(dev, "fail to register async notifier\n");
++ goto cleanup_subdev;
++ }
++
++ if (video_is_registered(&isc->video_dev))
++ break;
++ }
++
++ pm_runtime_set_active(dev);
++ pm_runtime_enable(dev);
++ pm_request_idle(dev);
++
++ regmap_read(isc->regmap, ISC_VERSION + isc->offsets.version, &ver);
++ dev_info(dev, "Microchip XISC version %x\n", ver);
++
++ return 0;
++
++cleanup_subdev:
++ isc_subdev_cleanup(isc);
++
++unregister_v4l2_device:
++ v4l2_device_unregister(&isc->v4l2_dev);
++
++unprepare_clk:
++ clk_disable_unprepare(isc->ispck);
++unprepare_hclk:
++ clk_disable_unprepare(isc->hclock);
++
++ isc_clk_cleanup(isc);
++
++ return ret;
++}
++
++static int microchip_xisc_remove(struct platform_device *pdev)
++{
++ struct isc_device *isc = platform_get_drvdata(pdev);
++
++ pm_runtime_disable(&pdev->dev);
++
++ isc_subdev_cleanup(isc);
++
++ v4l2_device_unregister(&isc->v4l2_dev);
++
++ clk_disable_unprepare(isc->ispck);
++ clk_disable_unprepare(isc->hclock);
++
++ isc_clk_cleanup(isc);
++
++ return 0;
++}
++
++static int __maybe_unused xisc_runtime_suspend(struct device *dev)
++{
++ struct isc_device *isc = dev_get_drvdata(dev);
++
++ clk_disable_unprepare(isc->ispck);
++ clk_disable_unprepare(isc->hclock);
++
++ return 0;
++}
++
++static int __maybe_unused xisc_runtime_resume(struct device *dev)
++{
++ struct isc_device *isc = dev_get_drvdata(dev);
++ int ret;
++
++ ret = clk_prepare_enable(isc->hclock);
++ if (ret)
++ return ret;
++
++ ret = clk_prepare_enable(isc->ispck);
++ if (ret)
++ clk_disable_unprepare(isc->hclock);
++
++ return ret;
++}
++
++static const struct dev_pm_ops microchip_xisc_dev_pm_ops = {
++ SET_RUNTIME_PM_OPS(xisc_runtime_suspend, xisc_runtime_resume, NULL)
++};
++
++static const struct of_device_id microchip_xisc_of_match[] = {
++ { .compatible = "microchip,sama7g5-isc" },
++ { }
++};
++MODULE_DEVICE_TABLE(of, microchip_xisc_of_match);
++
++static struct platform_driver microchip_xisc_driver = {
++ .probe = microchip_xisc_probe,
++ .remove = microchip_xisc_remove,
++ .driver = {
++ .name = "microchip-sama7g5-xisc",
++ .pm = &microchip_xisc_dev_pm_ops,
++ .of_match_table = of_match_ptr(microchip_xisc_of_match),
++ },
++};
++
++module_platform_driver(microchip_xisc_driver);
++
++MODULE_AUTHOR("Eugen Hristev <eugen.hristev@microchip.com>");
++MODULE_DESCRIPTION("The V4L2 driver for Microchip-XISC");
++MODULE_LICENSE("GPL v2");
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/186-ASoC-atmel-fix-shadowed-variable.patch b/target/linux/at91/patches-5.10/186-ASoC-atmel-fix-shadowed-variable.patch
new file mode 100644
index 0000000000..17e208b4a0
--- /dev/null
+++ b/target/linux/at91/patches-5.10/186-ASoC-atmel-fix-shadowed-variable.patch
@@ -0,0 +1,53 @@
+From 1b41c69264d7233a3e9a0aa36333ee22a5a049e9 Mon Sep 17 00:00:00 2001
+From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+Date: Fri, 26 Mar 2021 16:59:12 -0500
+Subject: [PATCH 186/247] ASoC: atmel: fix shadowed variable
+
+Fix cppcheck warning:
+
+sound/soc/atmel/atmel-classd.c:51:14: style: Local variable 'pwm_type'
+shadows outer variable [shadowVariable]
+ const char *pwm_type;
+ ^
+sound/soc/atmel/atmel-classd.c:226:27: note: Shadowed declaration
+static const char * const pwm_type[] = {
+ ^
+sound/soc/atmel/atmel-classd.c:51:14: note: Shadow variable
+ const char *pwm_type;
+ ^
+
+Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Link: https://lore.kernel.org/r/20210326215927.936377-3-pierre-louis.bossart@linux.intel.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ sound/soc/atmel/atmel-classd.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/sound/soc/atmel/atmel-classd.c b/sound/soc/atmel/atmel-classd.c
+index b1a28a9382fb..6023369e0f1a 100644
+--- a/sound/soc/atmel/atmel-classd.c
++++ b/sound/soc/atmel/atmel-classd.c
+@@ -48,7 +48,7 @@ static struct atmel_classd_pdata *atmel_classd_dt_init(struct device *dev)
+ {
+ struct device_node *np = dev->of_node;
+ struct atmel_classd_pdata *pdata;
+- const char *pwm_type;
++ const char *pwm_type_s;
+ int ret;
+
+ if (!np) {
+@@ -60,8 +60,8 @@ static struct atmel_classd_pdata *atmel_classd_dt_init(struct device *dev)
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+- ret = of_property_read_string(np, "atmel,pwm-type", &pwm_type);
+- if ((ret == 0) && (strcmp(pwm_type, "diff") == 0))
++ ret = of_property_read_string(np, "atmel,pwm-type", &pwm_type_s);
++ if ((ret == 0) && (strcmp(pwm_type_s, "diff") == 0))
+ pdata->pwm_type = CLASSD_MR_PWMTYP_DIFF;
+ else
+ pdata->pwm_type = CLASSD_MR_PWMTYP_SINGLE;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/187-ASoC-atmel-atmel-i2s-remove-useless-initialization.patch b/target/linux/at91/patches-5.10/187-ASoC-atmel-atmel-i2s-remove-useless-initialization.patch
new file mode 100644
index 0000000000..60f825c521
--- /dev/null
+++ b/target/linux/at91/patches-5.10/187-ASoC-atmel-atmel-i2s-remove-useless-initialization.patch
@@ -0,0 +1,41 @@
+From e53725fe0c7e6b52927280272f49fe5f4b4ef317 Mon Sep 17 00:00:00 2001
+From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+Date: Fri, 26 Mar 2021 16:59:13 -0500
+Subject: [PATCH 187/247] ASoC: atmel: atmel-i2s: remove useless initialization
+
+Cppcheck complains:
+
+sound/soc/atmel/atmel-i2s.c:628:6: style: Redundant initialization for 'err'. The initialized value is overwritten before it is read. [redundantInitialization]
+ err = devm_request_irq(&pdev->dev, irq, atmel_i2s_interrupt, 0,
+ ^
+sound/soc/atmel/atmel-i2s.c:598:10: note: err is initialized
+ int err = -ENXIO;
+ ^
+sound/soc/atmel/atmel-i2s.c:628:6: note: err is overwritten
+ err = devm_request_irq(&pdev->dev, irq, atmel_i2s_interrupt, 0,
+ ^
+
+Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Link: https://lore.kernel.org/r/20210326215927.936377-4-pierre-louis.bossart@linux.intel.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ sound/soc/atmel/atmel-i2s.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/sound/soc/atmel/atmel-i2s.c b/sound/soc/atmel/atmel-i2s.c
+index 7483c474ccd7..e7169c63becd 100644
+--- a/sound/soc/atmel/atmel-i2s.c
++++ b/sound/soc/atmel/atmel-i2s.c
+@@ -613,7 +613,7 @@ static int atmel_i2s_probe(struct platform_device *pdev)
+ struct regmap *regmap;
+ void __iomem *base;
+ int irq;
+- int err = -ENXIO;
++ int err;
+ unsigned int pcm_flags = 0;
+ unsigned int version;
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/188-ASoC-atmel-i2s-Set-symmetric-sample-bits.patch b/target/linux/at91/patches-5.10/188-ASoC-atmel-i2s-Set-symmetric-sample-bits.patch
new file mode 100644
index 0000000000..6a3bcc5060
--- /dev/null
+++ b/target/linux/at91/patches-5.10/188-ASoC-atmel-i2s-Set-symmetric-sample-bits.patch
@@ -0,0 +1,31 @@
+From a6f337fdf68294cfae233724567cbeea0ae5148f Mon Sep 17 00:00:00 2001
+From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Date: Fri, 18 Jun 2021 18:07:40 +0300
+Subject: [PATCH 188/247] ASoC: atmel-i2s: Set symmetric sample bits
+
+The I2S needs to have the same sample bits for both capture and playback
+streams.
+
+Fixes: b543e467d1a9 ("ASoC: atmel-i2s: add driver for the new Atmel I2S controller")
+Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Link: https://lore.kernel.org/r/20210618150741.401739-1-codrin.ciubotariu@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ sound/soc/atmel/atmel-i2s.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/sound/soc/atmel/atmel-i2s.c b/sound/soc/atmel/atmel-i2s.c
+index e7169c63becd..2a5bc7a54e6c 100644
+--- a/sound/soc/atmel/atmel-i2s.c
++++ b/sound/soc/atmel/atmel-i2s.c
+@@ -560,6 +560,7 @@ static struct snd_soc_dai_driver atmel_i2s_dai = {
+ },
+ .ops = &atmel_i2s_dai_ops,
+ .symmetric_rates = 1,
++ .symmetric_samplebits = 1,
+ };
+
+ static const struct snd_soc_component_driver atmel_i2s_component = {
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/189-watchdog-sama5d4_wdt-add-support-for-sama7g5-wdt.patch b/target/linux/at91/patches-5.10/189-watchdog-sama5d4_wdt-add-support-for-sama7g5-wdt.patch
new file mode 100644
index 0000000000..55ce7c525b
--- /dev/null
+++ b/target/linux/at91/patches-5.10/189-watchdog-sama5d4_wdt-add-support-for-sama7g5-wdt.patch
@@ -0,0 +1,51 @@
+From ff83cc9f95aaba75991210312061b7fe52aaa400 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Thu, 27 May 2021 13:01:19 +0300
+Subject: [PATCH 189/247] watchdog: sama5d4_wdt: add support for sama7g5-wdt
+
+Add support for compatible sama7g5-wdt.
+The sama7g5 wdt is the same hardware block as on sam9x60.
+Adapt the driver to use the sam9x60/sama7g5 variant if either
+of the two compatibles are selected (sam9x60-wdt/sama7g5-wdt).
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Reviewed-by: Guenter Roeck <linux@roeck-us.net>
+Link: https://lore.kernel.org/r/20210527100120.266796-2-eugen.hristev@microchip.com
+Signed-off-by: Guenter Roeck <linux@roeck-us.net>
+Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
+---
+ drivers/watchdog/sama5d4_wdt.c | 10 ++++++++--
+ 1 file changed, 8 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/watchdog/sama5d4_wdt.c b/drivers/watchdog/sama5d4_wdt.c
+index e5d11d6a2600..ec20ad4e534f 100644
+--- a/drivers/watchdog/sama5d4_wdt.c
++++ b/drivers/watchdog/sama5d4_wdt.c
+@@ -268,8 +268,10 @@ static int sama5d4_wdt_probe(struct platform_device *pdev)
+ wdd->min_timeout = MIN_WDT_TIMEOUT;
+ wdd->max_timeout = MAX_WDT_TIMEOUT;
+ wdt->last_ping = jiffies;
+- wdt->sam9x60_support = of_device_is_compatible(dev->of_node,
+- "microchip,sam9x60-wdt");
++
++ if (of_device_is_compatible(dev->of_node, "microchip,sam9x60-wdt") ||
++ of_device_is_compatible(dev->of_node, "microchip,sama7g5-wdt"))
++ wdt->sam9x60_support = true;
+
+ watchdog_set_drvdata(wdd, wdt);
+
+@@ -329,6 +331,10 @@ static const struct of_device_id sama5d4_wdt_of_match[] = {
+ {
+ .compatible = "microchip,sam9x60-wdt",
+ },
++ {
++ .compatible = "microchip,sama7g5-wdt",
++ },
++
+ { }
+ };
+ MODULE_DEVICE_TABLE(of, sama5d4_wdt_of_match);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/190-media-atmel-fix-build-when-ISC-m-and-XISC-y.patch b/target/linux/at91/patches-5.10/190-media-atmel-fix-build-when-ISC-m-and-XISC-y.patch
new file mode 100644
index 0000000000..f4d7bacdb4
--- /dev/null
+++ b/target/linux/at91/patches-5.10/190-media-atmel-fix-build-when-ISC-m-and-XISC-y.patch
@@ -0,0 +1,144 @@
+From dfcc0395f5e838c0b5c3fb93c9335b6a8892178a Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Mon, 5 Jul 2021 14:57:08 +0200
+Subject: [PATCH 190/247] media: atmel: fix build when ISC=m and XISC=y
+
+Building VIDEO_ATMEL_ISC as module and VIDEO_ATMEL_XISC as built-in
+(or viceversa) causes build errors:
+
+ or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o: in function `isc_async_complete':
+ atmel-isc-base.c:(.text+0x40d0): undefined reference to `__this_module'
+ or1k-linux-ld: atmel-isc-base.c:(.text+0x40f0): undefined reference to `__this_module'
+ or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o:(.rodata+0x390): undefined reference to `__this_module'
+ or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o:(__param+0x4): undefined reference to `__this_module'
+ or1k-linux-ld: drivers/media/platform/atmel/atmel-isc-base.o:(__param+0x18): undefined reference to `__this_module'
+
+This is caused by the file atmel-isc-base.c which is common code between
+the two drivers.
+
+The solution is to create another Kconfig symbol that is automatically
+selected and generates the module atmel-isc-base.ko. This module can be
+loaded when both drivers are modules, or built-in when at least one of them
+is built-in.
+
+Reported-by: kernel test robot <lkp@intel.com>
+Fixes: c9aa973884a1 ("media: atmel: atmel-isc: add microchip-xisc driver")
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ drivers/media/platform/atmel/Kconfig | 8 ++++++++
+ drivers/media/platform/atmel/Makefile | 5 +++--
+ drivers/media/platform/atmel/atmel-isc-base.c | 11 +++++++++++
+ 3 files changed, 22 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/media/platform/atmel/Kconfig b/drivers/media/platform/atmel/Kconfig
+index 99b51213f871..dda2f27da317 100644
+--- a/drivers/media/platform/atmel/Kconfig
++++ b/drivers/media/platform/atmel/Kconfig
+@@ -8,6 +8,7 @@ config VIDEO_ATMEL_ISC
+ select VIDEOBUF2_DMA_CONTIG
+ select REGMAP_MMIO
+ select V4L2_FWNODE
++ select VIDEO_ATMEL_ISC_BASE
+ help
+ This module makes the ATMEL Image Sensor Controller available
+ as a v4l2 device.
+@@ -19,10 +20,17 @@ config VIDEO_ATMEL_XISC
+ select VIDEOBUF2_DMA_CONTIG
+ select REGMAP_MMIO
+ select V4L2_FWNODE
++ select VIDEO_ATMEL_ISC_BASE
+ help
+ This module makes the ATMEL eXtended Image Sensor Controller
+ available as a v4l2 device.
+
++config VIDEO_ATMEL_ISC_BASE
++ tristate
++ default n
++ help
++ ATMEL ISC and XISC common code base.
++
+ config VIDEO_ATMEL_ISI
+ tristate "ATMEL Image Sensor Interface (ISI) support"
+ depends on VIDEO_V4L2 && OF
+diff --git a/drivers/media/platform/atmel/Makefile b/drivers/media/platform/atmel/Makefile
+index c5c01556c653..46d264ab7948 100644
+--- a/drivers/media/platform/atmel/Makefile
++++ b/drivers/media/platform/atmel/Makefile
+@@ -1,7 +1,8 @@
+ # SPDX-License-Identifier: GPL-2.0-only
+-atmel-isc-objs = atmel-sama5d2-isc.o atmel-isc-base.o
+-atmel-xisc-objs = atmel-sama7g5-isc.o atmel-isc-base.o
++atmel-isc-objs = atmel-sama5d2-isc.o
++atmel-xisc-objs = atmel-sama7g5-isc.o
+
+ obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o
++obj-$(CONFIG_VIDEO_ATMEL_ISC_BASE) += atmel-isc-base.o
+ obj-$(CONFIG_VIDEO_ATMEL_ISC) += atmel-isc.o
+ obj-$(CONFIG_VIDEO_ATMEL_XISC) += atmel-xisc.o
+diff --git a/drivers/media/platform/atmel/atmel-isc-base.c b/drivers/media/platform/atmel/atmel-isc-base.c
+index 46c6e3e20f33..54168b72fd2f 100644
+--- a/drivers/media/platform/atmel/atmel-isc-base.c
++++ b/drivers/media/platform/atmel/atmel-isc-base.c
+@@ -378,6 +378,7 @@ int isc_clk_init(struct isc_device *isc)
+
+ return 0;
+ }
++EXPORT_SYMBOL_GPL(isc_clk_init);
+
+ void isc_clk_cleanup(struct isc_device *isc)
+ {
+@@ -392,6 +393,7 @@ void isc_clk_cleanup(struct isc_device *isc)
+ clk_unregister(isc_clk->clk);
+ }
+ }
++EXPORT_SYMBOL_GPL(isc_clk_cleanup);
+
+ static int isc_queue_setup(struct vb2_queue *vq,
+ unsigned int *nbuffers, unsigned int *nplanes,
+@@ -1575,6 +1577,7 @@ irqreturn_t isc_interrupt(int irq, void *dev_id)
+
+ return ret;
+ }
++EXPORT_SYMBOL_GPL(isc_interrupt);
+
+ static void isc_hist_count(struct isc_device *isc, u32 *min, u32 *max)
+ {
+@@ -2209,6 +2212,7 @@ const struct v4l2_async_notifier_operations isc_async_ops = {
+ .unbind = isc_async_unbind,
+ .complete = isc_async_complete,
+ };
++EXPORT_SYMBOL_GPL(isc_async_ops);
+
+ void isc_subdev_cleanup(struct isc_device *isc)
+ {
+@@ -2221,6 +2225,7 @@ void isc_subdev_cleanup(struct isc_device *isc)
+
+ INIT_LIST_HEAD(&isc->subdev_entities);
+ }
++EXPORT_SYMBOL_GPL(isc_subdev_cleanup);
+
+ int isc_pipeline_init(struct isc_device *isc)
+ {
+@@ -2261,6 +2266,7 @@ int isc_pipeline_init(struct isc_device *isc)
+
+ return 0;
+ }
++EXPORT_SYMBOL_GPL(isc_pipeline_init);
+
+ /* regmap configuration */
+ #define ATMEL_ISC_REG_MAX 0xd5c
+@@ -2270,4 +2276,9 @@ const struct regmap_config isc_regmap_config = {
+ .val_bits = 32,
+ .max_register = ATMEL_ISC_REG_MAX,
+ };
++EXPORT_SYMBOL_GPL(isc_regmap_config);
+
++MODULE_AUTHOR("Songjun Wu");
++MODULE_AUTHOR("Eugen Hristev");
++MODULE_DESCRIPTION("Atmel ISC common code base");
++MODULE_LICENSE("GPL v2");
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/191-i2c-at91-remove-define-CONFIG_PM.patch b/target/linux/at91/patches-5.10/191-i2c-at91-remove-define-CONFIG_PM.patch
new file mode 100644
index 0000000000..bbdf5bcbac
--- /dev/null
+++ b/target/linux/at91/patches-5.10/191-i2c-at91-remove-define-CONFIG_PM.patch
@@ -0,0 +1,81 @@
+From 023a6b46536dce41f2c5a7425826fc4da4509b8f Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 5 Jul 2021 15:15:16 +0300
+Subject: [PATCH 191/247] i2c: at91: remove #define CONFIG_PM
+
+Remove #define CONFIG_PM and use __maybe_unused for PM functions and
+pm_ptr() for PM ops.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Signed-off-by: Wolfram Sang <wsa@kernel.org>
+---
+ drivers/i2c/busses/i2c-at91-core.c | 17 +++++------------
+ 1 file changed, 5 insertions(+), 12 deletions(-)
+
+diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
+index e14edd236108..9f3c3e8e8011 100644
+--- a/drivers/i2c/busses/i2c-at91-core.c
++++ b/drivers/i2c/busses/i2c-at91-core.c
+@@ -286,9 +286,7 @@ static int at91_twi_remove(struct platform_device *pdev)
+ return 0;
+ }
+
+-#ifdef CONFIG_PM
+-
+-static int at91_twi_runtime_suspend(struct device *dev)
++static int __maybe_unused at91_twi_runtime_suspend(struct device *dev)
+ {
+ struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+
+@@ -299,7 +297,7 @@ static int at91_twi_runtime_suspend(struct device *dev)
+ return 0;
+ }
+
+-static int at91_twi_runtime_resume(struct device *dev)
++static int __maybe_unused at91_twi_runtime_resume(struct device *dev)
+ {
+ struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+
+@@ -308,7 +306,7 @@ static int at91_twi_runtime_resume(struct device *dev)
+ return clk_prepare_enable(twi_dev->clk);
+ }
+
+-static int at91_twi_suspend_noirq(struct device *dev)
++static int __maybe_unused at91_twi_suspend_noirq(struct device *dev)
+ {
+ if (!pm_runtime_status_suspended(dev))
+ at91_twi_runtime_suspend(dev);
+@@ -316,7 +314,7 @@ static int at91_twi_suspend_noirq(struct device *dev)
+ return 0;
+ }
+
+-static int at91_twi_resume_noirq(struct device *dev)
++static int __maybe_unused at91_twi_resume_noirq(struct device *dev)
+ {
+ struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
+ int ret;
+@@ -342,11 +340,6 @@ static const struct dev_pm_ops at91_twi_pm = {
+ .runtime_resume = at91_twi_runtime_resume,
+ };
+
+-#define at91_twi_pm_ops (&at91_twi_pm)
+-#else
+-#define at91_twi_pm_ops NULL
+-#endif
+-
+ static struct platform_driver at91_twi_driver = {
+ .probe = at91_twi_probe,
+ .remove = at91_twi_remove,
+@@ -354,7 +347,7 @@ static struct platform_driver at91_twi_driver = {
+ .driver = {
+ .name = "at91_i2c",
+ .of_match_table = of_match_ptr(atmel_twi_dt_ids),
+- .pm = at91_twi_pm_ops,
++ .pm = pm_ptr(&at91_twi_pm),
+ },
+ };
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/192-ASoC-codecs-ad193x-add-support-for-96kHz-and-192kHz-.patch b/target/linux/at91/patches-5.10/192-ASoC-codecs-ad193x-add-support-for-96kHz-and-192kHz-.patch
new file mode 100644
index 0000000000..54fe85861f
--- /dev/null
+++ b/target/linux/at91/patches-5.10/192-ASoC-codecs-ad193x-add-support-for-96kHz-and-192kHz-.patch
@@ -0,0 +1,98 @@
+From 1c906a59a60887e1b997ebab63f19f33a1c69a3e Mon Sep 17 00:00:00 2001
+From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Date: Tue, 3 Aug 2021 13:48:25 +0300
+Subject: [PATCH 192/247] ASoC: codecs: ad193x: add support for 96kHz and
+ 192kHz playback rates
+
+ad193x devices support 96KHz and 192KHz sampling rates, when PLL/MCLK is
+referenced to 48kHz.
+Tested on ad1934.
+
+Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+Link: https://lore.kernel.org/r/20210803104825.2198335-1-codrin.ciubotariu@microchip.com
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ sound/soc/codecs/ad193x.c | 30 ++++++++++++++++++++++++++++--
+ sound/soc/codecs/ad193x.h | 4 ++++
+ 2 files changed, 32 insertions(+), 2 deletions(-)
+
+diff --git a/sound/soc/codecs/ad193x.c b/sound/soc/codecs/ad193x.c
+index f37ab7eda615..278a55af158b 100644
+--- a/sound/soc/codecs/ad193x.c
++++ b/sound/soc/codecs/ad193x.c
+@@ -316,6 +316,13 @@ static int ad193x_hw_params(struct snd_pcm_substream *substream,
+ int word_len = 0, master_rate = 0;
+ struct snd_soc_component *component = dai->component;
+ struct ad193x_priv *ad193x = snd_soc_component_get_drvdata(component);
++ bool is_playback = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
++ u8 dacc0;
++
++ dev_dbg(dai->dev, "%s() rate=%u format=%#x width=%u channels=%u\n",
++ __func__, params_rate(params), params_format(params),
++ params_width(params), params_channels(params));
++
+
+ /* bit size */
+ switch (params_width(params)) {
+@@ -346,6 +353,25 @@ static int ad193x_hw_params(struct snd_pcm_substream *substream,
+ break;
+ }
+
++ if (is_playback) {
++ switch (params_rate(params)) {
++ case 48000:
++ dacc0 = AD193X_DAC_SR_48;
++ break;
++ case 96000:
++ dacc0 = AD193X_DAC_SR_96;
++ break;
++ case 192000:
++ dacc0 = AD193X_DAC_SR_192;
++ break;
++ default:
++ dev_err(dai->dev, "invalid sampling rate: %d\n", params_rate(params));
++ return -EINVAL;
++ }
++
++ regmap_update_bits(ad193x->regmap, AD193X_DAC_CTRL0, AD193X_DAC_SR_MASK, dacc0);
++ }
++
+ regmap_update_bits(ad193x->regmap, AD193X_PLL_CLK_CTRL0,
+ AD193X_PLL_INPUT_MASK, master_rate);
+
+@@ -385,7 +411,7 @@ static struct snd_soc_dai_driver ad193x_dai = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 8,
+- .rates = SNDRV_PCM_RATE_48000,
++ .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
+ },
+@@ -407,7 +433,7 @@ static struct snd_soc_dai_driver ad193x_no_adc_dai = {
+ .stream_name = "Playback",
+ .channels_min = 2,
+ .channels_max = 8,
+- .rates = SNDRV_PCM_RATE_48000,
++ .rates = SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000,
+ .formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE |
+ SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S24_LE,
+ },
+diff --git a/sound/soc/codecs/ad193x.h b/sound/soc/codecs/ad193x.h
+index 377854712c20..61f4648861d5 100644
+--- a/sound/soc/codecs/ad193x.h
++++ b/sound/soc/codecs/ad193x.h
+@@ -37,6 +37,10 @@ int ad193x_probe(struct device *dev, struct regmap *regmap,
+ #define AD193X_PLL_CLK_SRC_MCLK (1 << 1)
+ #define AD193X_DAC_CTRL0 0x02
+ #define AD193X_DAC_POWERDOWN 0x01
++#define AD193X_DAC_SR_MASK 0x06
++#define AD193X_DAC_SR_48 (0 << 1)
++#define AD193X_DAC_SR_96 (1 << 1)
++#define AD193X_DAC_SR_192 (2 << 1)
+ #define AD193X_DAC_SERFMT_MASK 0xC0
+ #define AD193X_DAC_SERFMT_STEREO (0 << 6)
+ #define AD193X_DAC_SERFMT_TDM (1 << 6)
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/193-media-atmel-atmel-sama5d2-isc-fix-YUYV-format.patch b/target/linux/at91/patches-5.10/193-media-atmel-atmel-sama5d2-isc-fix-YUYV-format.patch
new file mode 100644
index 0000000000..c8cf87021f
--- /dev/null
+++ b/target/linux/at91/patches-5.10/193-media-atmel-atmel-sama5d2-isc-fix-YUYV-format.patch
@@ -0,0 +1,53 @@
+From 21261e30679118b96ed537d1cdf9e12682fc1b29 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Wed, 9 Jun 2021 15:00:28 +0200
+Subject: [PATCH 193/247] media: atmel: atmel-sama5d2-isc: fix YUYV format
+
+SAMA5D2 does not have the YCYC field for the RLP (rounding, limiting,
+packaging) module.
+The YCYC field is supposed to work with interleaved YUV formats like YUYV.
+In SAMA5D2, we have to use YYCC field, which is used for both planar
+formats like YUV420 and interleaved formats like YUYV.
+Fix the according rlp callback to replace the generic YCYC field (which
+makes more sense from a logical point of view) with the required YYCC
+field.
+
+Fixes: debfa496871c ("media: atmel: atmel-isc-base: add support for more formats and additional pipeline modules")
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
+Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+---
+ .../media/platform/atmel/atmel-sama5d2-isc.c | 17 +++++++++++++++++
+ 1 file changed, 17 insertions(+)
+
+diff --git a/drivers/media/platform/atmel/atmel-sama5d2-isc.c b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+index d6fd22b127fd..4f09db71d152 100644
+--- a/drivers/media/platform/atmel/atmel-sama5d2-isc.c
++++ b/drivers/media/platform/atmel/atmel-sama5d2-isc.c
+@@ -255,6 +255,23 @@ static void isc_sama5d2_config_rlp(struct isc_device *isc)
+ struct regmap *regmap = isc->regmap;
+ u32 rlp_mode = isc->config.rlp_cfg_mode;
+
++ /*
++ * In sama5d2, the YUV planar modes and the YUYV modes are treated
++ * in the same way in RLP register.
++ * Normally, YYCC mode should be Luma(n) - Color B(n) - Color R (n)
++ * and YCYC should be Luma(n + 1) - Color B (n) - Luma (n) - Color R (n)
++ * but in sama5d2, the YCYC mode does not exist, and YYCC must be
++ * selected for both planar and interleaved modes, as in fact
++ * both modes are supported.
++ *
++ * Thus, if the YCYC mode is selected, replace it with the
++ * sama5d2-compliant mode which is YYCC .
++ */
++ if ((rlp_mode & ISC_RLP_CFG_MODE_YCYC) == ISC_RLP_CFG_MODE_YCYC) {
++ rlp_mode &= ~ISC_RLP_CFG_MODE_MASK;
++ rlp_mode |= ISC_RLP_CFG_MODE_YYCC;
++ }
++
+ regmap_update_bits(regmap, ISC_RLP_CFG + isc->offsets.rlp,
+ ISC_RLP_CFG_MODE_MASK, rlp_mode);
+ }
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/194-clk-at91-add-register-definition-for-sama7g5-s-maste.patch b/target/linux/at91/patches-5.10/194-clk-at91-add-register-definition-for-sama7g5-s-maste.patch
new file mode 100644
index 0000000000..deda80985d
--- /dev/null
+++ b/target/linux/at91/patches-5.10/194-clk-at91-add-register-definition-for-sama7g5-s-maste.patch
@@ -0,0 +1,56 @@
+From 602f85ff15d45bd313f8f6600d72202a50fd83a9 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 19 Jul 2021 11:03:17 +0300
+Subject: [PATCH 194/247] clk: at91: add register definition for sama7g5's
+ master clock
+
+Add register definitions for SAMA7G5's master clock. These would be
+also used by architecture specific power saving code.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210719080317.1045832-3-claudiu.beznea@microchip.com
+---
+ include/linux/clk/at91_pmc.h | 26 ++++++++++++++++++++++++++
+ 1 file changed, 26 insertions(+)
+
+diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h
+index a4f82e836a7c..ccb3f034bfa9 100644
+--- a/include/linux/clk/at91_pmc.h
++++ b/include/linux/clk/at91_pmc.h
+@@ -137,6 +137,32 @@
+ #define AT91_PMC_PLLADIV2_ON (1 << 12)
+ #define AT91_PMC_H32MXDIV BIT(24)
+
++#define AT91_PMC_MCR_V2 0x30 /* Master Clock Register [SAMA7G5 only] */
++#define AT91_PMC_MCR_V2_ID_MSK (0xF)
++#define AT91_PMC_MCR_V2_ID(_id) ((_id) & AT91_PMC_MCR_V2_ID_MSK)
++#define AT91_PMC_MCR_V2_CMD (1 << 7)
++#define AT91_PMC_MCR_V2_DIV (7 << 8)
++#define AT91_PMC_MCR_V2_DIV1 (0 << 8)
++#define AT91_PMC_MCR_V2_DIV2 (1 << 8)
++#define AT91_PMC_MCR_V2_DIV4 (2 << 8)
++#define AT91_PMC_MCR_V2_DIV8 (3 << 8)
++#define AT91_PMC_MCR_V2_DIV16 (4 << 8)
++#define AT91_PMC_MCR_V2_DIV32 (5 << 8)
++#define AT91_PMC_MCR_V2_DIV64 (6 << 8)
++#define AT91_PMC_MCR_V2_DIV3 (7 << 8)
++#define AT91_PMC_MCR_V2_CSS (0x1F << 16)
++#define AT91_PMC_MCR_V2_CSS_MD_SLCK (0 << 16)
++#define AT91_PMC_MCR_V2_CSS_TD_SLCK (1 << 16)
++#define AT91_PMC_MCR_V2_CSS_MAINCK (2 << 16)
++#define AT91_PMC_MCR_V2_CSS_MCK0 (3 << 16)
++#define AT91_PMC_MCR_V2_CSS_SYSPLL (5 << 16)
++#define AT91_PMC_MCR_V2_CSS_DDRPLL (6 << 16)
++#define AT91_PMC_MCR_V2_CSS_IMGPLL (7 << 16)
++#define AT91_PMC_MCR_V2_CSS_BAUDPLL (8 << 16)
++#define AT91_PMC_MCR_V2_CSS_AUDIOPLL (9 << 16)
++#define AT91_PMC_MCR_V2_CSS_ETHPLL (10 << 16)
++#define AT91_PMC_MCR_V2_EN (1 << 28)
++
+ #define AT91_PMC_XTALF 0x34 /* Main XTAL Frequency Register [SAMA7G5 only] */
+
+ #define AT91_PMC_USB 0x38 /* USB Clock Register [some SAM9 only] */
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/195-ARM-at91-add-new-SoC-sama7g5.patch b/target/linux/at91/patches-5.10/195-ARM-at91-add-new-SoC-sama7g5.patch
new file mode 100644
index 0000000000..d333f0d957
--- /dev/null
+++ b/target/linux/at91/patches-5.10/195-ARM-at91-add-new-SoC-sama7g5.patch
@@ -0,0 +1,54 @@
+From 32bac6971d0572f67758f9a8c8af7bf4592f1675 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Fri, 9 Apr 2021 14:31:15 +0300
+Subject: [PATCH 195/247] ARM: at91: add new SoC sama7g5
+
+Add new SoC from at91 family : sama7g5
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+[claudiu.beznea@microchip.com: Select PLL, generic clock and UTMI support, add PM configs]
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210409113116.482199-1-eugen.hristev@microchip.com
+Link: https://lore.kernel.org/r/20210719080317.1045832-2-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/Kconfig | 18 ++++++++++++++++++
+ 1 file changed, 18 insertions(+)
+
+diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
+index ccd7e80ce943..b09bb2279f7f 100644
+--- a/arch/arm/mach-at91/Kconfig
++++ b/arch/arm/mach-at91/Kconfig
+@@ -57,6 +57,16 @@ config SOC_SAMA5D4
+ help
+ Select this if you are using one of Microchip's SAMA5D4 family SoC.
+
++config SOC_SAMA7G5
++ bool "SAMA7G5 family"
++ depends on ARCH_MULTI_V7
++ select HAVE_AT91_GENERATED_CLK
++ select HAVE_AT91_SAM9X60_PLL
++ select HAVE_AT91_UTMI
++ select SOC_SAMA7
++ help
++ Select this if you are using one of Microchip's SAMA7G5 family SoC.
++
+ config SOC_AT91RM9200
+ bool "AT91RM9200"
+ depends on ARCH_MULTI_V4T
+@@ -191,4 +201,12 @@ config SOC_SAMA5
+ config ATMEL_PM
+ bool
+
++config SOC_SAMA7
++ bool
++ select ARM_GIC
++ select ATMEL_PM if PM
++ select ATMEL_SDRAMC
++ select MEMORY
++ select SOC_SAM_V7
++ select SRAM if PM
+ endif
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch b/target/linux/at91/patches-5.10/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch
new file mode 100644
index 0000000000..40b05a43e8
--- /dev/null
+++ b/target/linux/at91/patches-5.10/196-ARM-at91-debug-add-sama7g5-low-level-debug-uart.patch
@@ -0,0 +1,55 @@
+From 3de4879bf59b46a966ea226a67df70b88f43a23e Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Fri, 9 Apr 2021 14:31:16 +0300
+Subject: [PATCH 196/247] ARM: at91: debug: add sama7g5 low level debug uart
+
+Add sama7g5 SoC debug uart on Flexcom3. This is the UART that the
+ROM bootloader uses.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210409113116.482199-2-eugen.hristev@microchip.com
+[claudiu.beznea: adapt to v5.10.27]
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+---
+ arch/arm/Kconfig.debug | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
+index dd1cf7035398..09901118e3fb 100644
+--- a/arch/arm/Kconfig.debug
++++ b/arch/arm/Kconfig.debug
+@@ -191,6 +191,14 @@ choice
+ their output to the USART1 port on SAMV7 based
+ machines.
+
++ config DEBUG_AT91_SAMA7G5_FLEXCOM3
++ bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3"
++ select DEBUG_AT91_UART
++ depends on SOC_SAMA7G5
++ help
++ Say Y here if you want kernel low-level debugging support
++ on the FLEXCOM3 port of SAMA7G5.
++
+ config DEBUG_BCM2835
+ bool "Kernel low-level debugging on BCM2835 PL011 UART"
+ depends on ARCH_BCM2835 && ARCH_MULTI_V6
+@@ -1731,6 +1739,7 @@ config DEBUG_UART_PHYS
+ default 0xd4017000 if DEBUG_MMP_UART2
+ default 0xd4018000 if DEBUG_MMP_UART3
+ default 0xe0000000 if DEBUG_SPEAR13XX
++ default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
+ default 0xe4007000 if DEBUG_HIP04_UART
+ default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
+ default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
+@@ -1791,6 +1800,7 @@ config DEBUG_UART_VIRT
+ default 0xc8912000 if DEBUG_RV1108_UART0
+ default 0xe0010fe0 if ARCH_RPC
+ default 0xf0000be0 if ARCH_EBSA110
++ default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
+ default 0xf0010000 if DEBUG_ASM9260_UART
+ default 0xf0100000 if DEBUG_DIGICOLOR_UA0
+ default 0xf01fb000 if DEBUG_NOMADIK_UART
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/197-ARM-at91-pm-move-pm_bu-to-soc_pm-data-structure.patch b/target/linux/at91/patches-5.10/197-ARM-at91-pm-move-pm_bu-to-soc_pm-data-structure.patch
new file mode 100644
index 0000000000..fd5a8cd93e
--- /dev/null
+++ b/target/linux/at91/patches-5.10/197-ARM-at91-pm-move-pm_bu-to-soc_pm-data-structure.patch
@@ -0,0 +1,92 @@
+From e41d00bdaa31b36fd314e927104082615aa4643a Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:49:47 +0300
+Subject: [PATCH 197/247] ARM: at91: pm: move pm_bu to soc_pm data structure
+
+Move pm_bu to soc_pm data structure.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-2-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.c | 34 +++++++++++++++++++++-------------
+ 1 file changed, 21 insertions(+), 13 deletions(-)
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index 2dee383f9050..3fa223c21618 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -27,10 +27,25 @@
+ #include "generic.h"
+ #include "pm.h"
+
++/**
++ * struct at91_pm_bu - AT91 power management backup unit data structure
++ * @suspended: true if suspended to backup mode
++ * @reserved: reserved
++ * @canary: canary data for memory checking after exit from backup mode
++ * @resume: resume API
++ */
++struct at91_pm_bu {
++ int suspended;
++ unsigned long reserved;
++ phys_addr_t canary;
++ phys_addr_t resume;
++};
++
+ struct at91_soc_pm {
+ int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
+ int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
+ const struct of_device_id *ws_ids;
++ struct at91_pm_bu *bu;
+ struct at91_pm_data data;
+ };
+
+@@ -71,13 +86,6 @@ static int at91_pm_valid_state(suspend_state_t state)
+
+ static int canary = 0xA5A5A5A5;
+
+-static struct at91_pm_bu {
+- int suspended;
+- unsigned long reserved;
+- phys_addr_t canary;
+- phys_addr_t resume;
+-} *pm_bu;
+-
+ struct wakeup_source_info {
+ unsigned int pmc_fsmr_bit;
+ unsigned int shdwc_mr_bit;
+@@ -288,7 +296,7 @@ static int at91_suspend_finish(unsigned long val)
+ static void at91_pm_suspend(suspend_state_t state)
+ {
+ if (soc_pm.data.mode == AT91_PM_BACKUP) {
+- pm_bu->suspended = 1;
++ soc_pm.bu->suspended = 1;
+
+ cpu_suspend(0, at91_suspend_finish);
+
+@@ -672,16 +680,16 @@ static int __init at91_pm_backup_init(void)
+ goto securam_fail;
+ }
+
+- pm_bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu));
+- if (!pm_bu) {
++ soc_pm.bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu));
++ if (!soc_pm.bu) {
+ pr_warn("%s: unable to alloc securam!\n", __func__);
+ ret = -ENOMEM;
+ goto securam_fail;
+ }
+
+- pm_bu->suspended = 0;
+- pm_bu->canary = __pa_symbol(&canary);
+- pm_bu->resume = __pa_symbol(cpu_resume);
++ soc_pm.bu->suspended = 0;
++ soc_pm.bu->canary = __pa_symbol(&canary);
++ soc_pm.bu->resume = __pa_symbol(cpu_resume);
+
+ return 0;
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/198-ARM-at91-pm-move-the-setup-of-soc_pm.bu-suspended.patch b/target/linux/at91/patches-5.10/198-ARM-at91-pm-move-the-setup-of-soc_pm.bu-suspended.patch
new file mode 100644
index 0000000000..bbc0d00eed
--- /dev/null
+++ b/target/linux/at91/patches-5.10/198-ARM-at91-pm-move-the-setup-of-soc_pm.bu-suspended.patch
@@ -0,0 +1,60 @@
+From c8f2a8aaae41fa0a40ad88855ae82696098230d7 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:49:48 +0300
+Subject: [PATCH 198/247] ARM: at91: pm: move the setup of soc_pm.bu->suspended
+
+Move the setup of soc_pm.bu->suspended in platform_suspend::begin
+function so that the PMC code in charge with clocks suspend/resume
+to differentiate b/w standard PM mode and backup mode.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-3-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.c | 15 ++++++++++++---
+ 1 file changed, 12 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index 3fa223c21618..f182d8bf6f82 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -214,6 +214,8 @@ static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
+ */
+ static int at91_pm_begin(suspend_state_t state)
+ {
++ int ret;
++
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ soc_pm.data.mode = soc_pm.data.suspend_mode;
+@@ -227,7 +229,16 @@ static int at91_pm_begin(suspend_state_t state)
+ soc_pm.data.mode = -1;
+ }
+
+- return at91_pm_config_ws(soc_pm.data.mode, true);
++ ret = at91_pm_config_ws(soc_pm.data.mode, true);
++ if (ret)
++ return ret;
++
++ if (soc_pm.data.mode == AT91_PM_BACKUP)
++ soc_pm.bu->suspended = 1;
++ else if (soc_pm.bu)
++ soc_pm.bu->suspended = 0;
++
++ return 0;
+ }
+
+ /*
+@@ -296,8 +307,6 @@ static int at91_suspend_finish(unsigned long val)
+ static void at91_pm_suspend(suspend_state_t state)
+ {
+ if (soc_pm.data.mode == AT91_PM_BACKUP) {
+- soc_pm.bu->suspended = 1;
+-
+ cpu_suspend(0, at91_suspend_finish);
+
+ /* The SRAM is lost between suspend cycles */
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/199-ARM-at91-pm-document-at91_soc_pm-structure.patch b/target/linux/at91/patches-5.10/199-ARM-at91-pm-document-at91_soc_pm-structure.patch
new file mode 100644
index 0000000000..b0b94e472a
--- /dev/null
+++ b/target/linux/at91/patches-5.10/199-ARM-at91-pm-document-at91_soc_pm-structure.patch
@@ -0,0 +1,36 @@
+From 59a4b3b9381b727f416d9cc52e60d0bc7d93ecae Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:49:49 +0300
+Subject: [PATCH 199/247] ARM: at91: pm: document at91_soc_pm structure
+
+Document at91_soc_pm structure.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-4-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.c | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index f182d8bf6f82..a060bec77f20 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -41,6 +41,14 @@ struct at91_pm_bu {
+ phys_addr_t resume;
+ };
+
++/**
++ * struct at91_soc_pm - AT91 SoC power management data structure
++ * @config_shdwc_ws: wakeup sources configuration function for SHDWC
++ * @config_pmc_ws: wakeup srouces configuration function for PMC
++ * @ws_ids: wakup sources of_device_id array
++ * @data: PM data to be used on last phase of suspend
++ * @bu: backup unit mapped data (for backup mode)
++ */
+ struct at91_soc_pm {
+ int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
+ int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/200-ARM-at91-pm-check-for-different-controllers-in-at91_.patch b/target/linux/at91/patches-5.10/200-ARM-at91-pm-check-for-different-controllers-in-at91_.patch
new file mode 100644
index 0000000000..b3ccdbf6d0
--- /dev/null
+++ b/target/linux/at91/patches-5.10/200-ARM-at91-pm-check-for-different-controllers-in-at91_.patch
@@ -0,0 +1,243 @@
+From 0c4cbd38a705bdeab11de4c84ad0ce8c3de8a81d Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:49:50 +0300
+Subject: [PATCH 200/247] ARM: at91: pm: check for different controllers in
+ at91_pm_modes_init()
+
+at91_pm_modes_init() checks for proper nodes in device tree and maps
+them accordingly. Up to SAMA7G5 all AT91 SoCs had the same mapping
+b/w power saving modes and different controllers needed in the
+final/first steps of suspend/resume. SAMA7G5 is not aligned with the
+old SoCs thus the code is adapted for this. This patch prepares
+the field for next commits.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-5-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.c | 143 +++++++++++++++++++++++++---------------
+ 1 file changed, 91 insertions(+), 52 deletions(-)
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index a060bec77f20..e9f9fb410761 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -57,6 +57,18 @@ struct at91_soc_pm {
+ struct at91_pm_data data;
+ };
+
++/**
++ * enum at91_pm_iomaps: IOs that needs to be mapped for different PM modes
++ * @AT91_PM_IOMAP_SHDWC: SHDWC controller
++ * @AT91_PM_IOMAP_SFRBU: SFRBU controller
++ */
++enum at91_pm_iomaps {
++ AT91_PM_IOMAP_SHDWC,
++ AT91_PM_IOMAP_SFRBU,
++};
++
++#define AT91_PM_IOMAP(name) BIT(AT91_PM_IOMAP_##name)
++
+ static struct at91_soc_pm soc_pm = {
+ .data = {
+ .standby_mode = AT91_PM_STANDBY,
+@@ -671,24 +683,15 @@ static int __init at91_pm_backup_init(void)
+ if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
+ return 0;
+
+- np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
+- if (!np) {
+- pr_warn("%s: failed to find sfrbu!\n", __func__);
+- return ret;
+- }
+-
+- soc_pm.data.sfrbu = of_iomap(np, 0);
+- of_node_put(np);
+-
+ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
+ if (!np)
+- goto securam_fail_no_ref_dev;
++ return ret;
+
+ pdev = of_find_device_by_node(np);
+ of_node_put(np);
+ if (!pdev) {
+ pr_warn("%s: failed to find securam device!\n", __func__);
+- goto securam_fail_no_ref_dev;
++ return ret;
+ }
+
+ sram_pool = gen_pool_get(&pdev->dev, NULL);
+@@ -712,64 +715,92 @@ static int __init at91_pm_backup_init(void)
+
+ securam_fail:
+ put_device(&pdev->dev);
+-securam_fail_no_ref_dev:
+- iounmap(soc_pm.data.sfrbu);
+- soc_pm.data.sfrbu = NULL;
+ return ret;
+ }
+
+-static void __init at91_pm_use_default_mode(int pm_mode)
+-{
+- if (pm_mode != AT91_PM_ULP1 && pm_mode != AT91_PM_BACKUP)
+- return;
+-
+- if (soc_pm.data.standby_mode == pm_mode)
+- soc_pm.data.standby_mode = AT91_PM_ULP0;
+- if (soc_pm.data.suspend_mode == pm_mode)
+- soc_pm.data.suspend_mode = AT91_PM_ULP0;
+-}
+-
+ static const struct of_device_id atmel_shdwc_ids[] = {
+ { .compatible = "atmel,sama5d2-shdwc" },
+ { .compatible = "microchip,sam9x60-shdwc" },
+ { /* sentinel. */ }
+ };
+
+-static void __init at91_pm_modes_init(void)
++static void __init at91_pm_modes_init(const u32 *maps, int len)
+ {
+ struct device_node *np;
+- int ret;
++ int ret, mode;
+
+- if (!at91_is_pm_mode_active(AT91_PM_BACKUP) &&
+- !at91_is_pm_mode_active(AT91_PM_ULP1))
+- return;
++ ret = at91_pm_backup_init();
++ if (ret) {
++ if (soc_pm.data.standby_mode == AT91_PM_BACKUP)
++ soc_pm.data.standby_mode = AT91_PM_ULP0;
++ if (soc_pm.data.suspend_mode == AT91_PM_BACKUP)
++ soc_pm.data.suspend_mode = AT91_PM_ULP0;
++ }
+
+- np = of_find_matching_node(NULL, atmel_shdwc_ids);
+- if (!np) {
+- pr_warn("%s: failed to find shdwc!\n", __func__);
+- goto ulp1_default;
++ if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) ||
++ maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC)) {
++ np = of_find_matching_node(NULL, atmel_shdwc_ids);
++ if (!np) {
++ pr_warn("%s: failed to find shdwc!\n", __func__);
++
++ /* Use ULP0 if it doesn't needs SHDWC.*/
++ if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC)))
++ mode = AT91_PM_ULP0;
++ else
++ mode = AT91_PM_STANDBY;
++
++ if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC))
++ soc_pm.data.standby_mode = mode;
++ if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC))
++ soc_pm.data.suspend_mode = mode;
++ } else {
++ soc_pm.data.shdwc = of_iomap(np, 0);
++ of_node_put(np);
++ }
+ }
+
+- soc_pm.data.shdwc = of_iomap(np, 0);
+- of_node_put(np);
++ if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) ||
++ maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU)) {
++ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
++ if (!np) {
++ pr_warn("%s: failed to find sfrbu!\n", __func__);
++
++ /*
++ * Use ULP0 if it doesn't need SHDWC or if SHDWC
++ * was already located.
++ */
++ if (!(maps[AT91_PM_ULP0] & AT91_PM_IOMAP(SHDWC)) ||
++ soc_pm.data.shdwc)
++ mode = AT91_PM_ULP0;
++ else
++ mode = AT91_PM_STANDBY;
++
++ if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU))
++ soc_pm.data.standby_mode = mode;
++ if (maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU))
++ soc_pm.data.suspend_mode = mode;
++ } else {
++ soc_pm.data.sfrbu = of_iomap(np, 0);
++ of_node_put(np);
++ }
++ }
+
+- ret = at91_pm_backup_init();
+- if (ret) {
+- if (!at91_is_pm_mode_active(AT91_PM_ULP1))
+- goto unmap;
+- else
+- goto backup_default;
++ /* Unmap all unnecessary. */
++ if (soc_pm.data.shdwc &&
++ !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) ||
++ maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC))) {
++ iounmap(soc_pm.data.shdwc);
++ soc_pm.data.shdwc = NULL;
+ }
+
+- return;
++ if (soc_pm.data.sfrbu &&
++ !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) ||
++ maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU))) {
++ iounmap(soc_pm.data.sfrbu);
++ soc_pm.data.sfrbu = NULL;
++ }
+
+-unmap:
+- iounmap(soc_pm.data.shdwc);
+- soc_pm.data.shdwc = NULL;
+-ulp1_default:
+- at91_pm_use_default_mode(AT91_PM_ULP1);
+-backup_default:
+- at91_pm_use_default_mode(AT91_PM_BACKUP);
++ return;
+ }
+
+ struct pmc_info {
+@@ -936,13 +967,16 @@ void __init sam9x60_pm_init(void)
+ static const int modes[] __initconst = {
+ AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
+ };
++ static const int iomaps[] __initconst = {
++ [AT91_PM_ULP1] = AT91_PM_IOMAP(SHDWC),
++ };
+ int ret;
+
+ if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
+ return;
+
+ at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+- at91_pm_modes_init();
++ at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
+ ret = at91_dt_ramc();
+ if (ret)
+ return;
+@@ -999,13 +1033,18 @@ void __init sama5d2_pm_init(void)
+ AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
+ AT91_PM_BACKUP,
+ };
++ static const u32 iomaps[] __initconst = {
++ [AT91_PM_ULP1] = AT91_PM_IOMAP(SHDWC),
++ [AT91_PM_BACKUP] = AT91_PM_IOMAP(SHDWC) |
++ AT91_PM_IOMAP(SFRBU),
++ };
+ int ret;
+
+ if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
+ return;
+
+ at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+- at91_pm_modes_init();
++ at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
+ ret = at91_dt_ramc();
+ if (ret)
+ return;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/201-ARM-at91-pm-do-not-initialize-pdev.patch b/target/linux/at91/patches-5.10/201-ARM-at91-pm-do-not-initialize-pdev.patch
new file mode 100644
index 0000000000..805cda8a5b
--- /dev/null
+++ b/target/linux/at91/patches-5.10/201-ARM-at91-pm-do-not-initialize-pdev.patch
@@ -0,0 +1,30 @@
+From 31e25503bbad1fffd29fd074a46bd4858b65304f Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:49:51 +0300
+Subject: [PATCH 201/247] ARM: at91: pm: do not initialize pdev
+
+There is no need to initialize pdev.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-6-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index e9f9fb410761..96f2be0a53cb 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -674,7 +674,7 @@ static int __init at91_pm_backup_init(void)
+ {
+ struct gen_pool *sram_pool;
+ struct device_node *np;
+- struct platform_device *pdev = NULL;
++ struct platform_device *pdev;
+ int ret = -ENODEV;
+
+ if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/202-ARM-at91-pm-use-r7-instead-of-tmp1.patch b/target/linux/at91/patches-5.10/202-ARM-at91-pm-use-r7-instead-of-tmp1.patch
new file mode 100644
index 0000000000..f53d38556f
--- /dev/null
+++ b/target/linux/at91/patches-5.10/202-ARM-at91-pm-use-r7-instead-of-tmp1.patch
@@ -0,0 +1,65 @@
+From 8a7a4cf3860910e460e2c3ca467b1dabf7ce9827 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:49:52 +0300
+Subject: [PATCH 202/247] ARM: at91: pm: use r7 instead of tmp1
+
+Use r7 instead of tmp1 in macros. This prepares the filed for
+next commits.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-7-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm_suspend.S | 18 ++++++++++++------
+ 1 file changed, 12 insertions(+), 6 deletions(-)
+
+diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
+index b683c2caa40b..3d20c9880fee 100644
+--- a/arch/arm/mach-at91/pm_suspend.S
++++ b/arch/arm/mach-at91/pm_suspend.S
+@@ -31,30 +31,36 @@ tmp3 .req r6
+
+ /*
+ * Wait until master oscillator has stabilized.
++ *
++ * Side effects: overwrites r7
+ */
+ .macro wait_moscrdy
+-1: ldr tmp1, [pmc, #AT91_PMC_SR]
+- tst tmp1, #AT91_PMC_MOSCS
++1: ldr r7, [pmc, #AT91_PMC_SR]
++ tst r7, #AT91_PMC_MOSCS
+ beq 1b
+ .endm
+
+ /*
+ * Wait for main oscillator selection is done
++ *
++ * Side effects: overwrites r7
+ */
+ .macro wait_moscsels
+-1: ldr tmp1, [pmc, #AT91_PMC_SR]
+- tst tmp1, #AT91_PMC_MOSCSELS
++1: ldr r7, [pmc, #AT91_PMC_SR]
++ tst r7, #AT91_PMC_MOSCSELS
+ beq 1b
+ .endm
+
+ /*
+ * Put the processor to enter the idle state
++ *
++ * Side effects: overwrites r7
+ */
+ .macro at91_cpu_idle
+
+ #if defined(CONFIG_CPU_V7)
+- mov tmp1, #AT91_PMC_PCK
+- str tmp1, [pmc, #AT91_PMC_SCDR]
++ mov r7, #AT91_PMC_PCK
++ str r7, [pmc, #AT91_PMC_SCDR]
+
+ dsb
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/203-ARM-at91-pm-avoid-push-and-pop-on-stack-while-memory.patch b/target/linux/at91/patches-5.10/203-ARM-at91-pm-avoid-push-and-pop-on-stack-while-memory.patch
new file mode 100644
index 0000000000..3b59430c9e
--- /dev/null
+++ b/target/linux/at91/patches-5.10/203-ARM-at91-pm-avoid-push-and-pop-on-stack-while-memory.patch
@@ -0,0 +1,472 @@
+From 892f6d2fb9c42d4ac451236639599f533c37b507 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:49:53 +0300
+Subject: [PATCH 203/247] ARM: at91: pm: avoid push and pop on stack while
+ memory is in self-refersh
+
+For the previous AT91 RAM controller and self-refresh procedure this
+had no side effects. However, for SAMA7G5 the self-refresh procedure
+doesn't allow this anymore as the RAM controller ports are closed
+before switching it to self-refresh. This commits prepares the code
+for the following ones adding self-refresh and PM support for SAMA7G5.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-8-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm_suspend.S | 397 +++++++++++++++++---------------
+ 1 file changed, 205 insertions(+), 192 deletions(-)
+
+diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
+index 3d20c9880fee..960ad29cce51 100644
+--- a/arch/arm/mach-at91/pm_suspend.S
++++ b/arch/arm/mach-at91/pm_suspend.S
+@@ -75,98 +75,147 @@ tmp3 .req r6
+
+ .arm
+
+-/*
+- * void at91_suspend_sram_fn(struct at91_pm_data*)
+- * @input param:
+- * @r0: base address of struct at91_pm_data
++/**
++ * Enable self-refresh
++ *
++ * register usage:
++ * @r1: memory type
++ * @r2: base address of the sram controller
++ * @r3: temporary
+ */
+-/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
+- .align 3
+-ENTRY(at91_pm_suspend_in_sram)
+- /* Save registers on stack */
+- stmfd sp!, {r4 - r12, lr}
++.macro at91_sramc_self_refresh_ena
++ ldr r1, .memtype
++ ldr r2, .sramc_base
+
+- /* Drain write buffer */
+- mov tmp1, #0
+- mcr p15, 0, tmp1, c7, c10, 4
++ cmp r1, #AT91_MEMCTRL_MC
++ bne sr_ena_ddrc_sf
+
+- ldr tmp1, [r0, #PM_DATA_PMC]
+- str tmp1, .pmc_base
+- ldr tmp1, [r0, #PM_DATA_RAMC0]
+- str tmp1, .sramc_base
+- ldr tmp1, [r0, #PM_DATA_RAMC1]
+- str tmp1, .sramc1_base
+- ldr tmp1, [r0, #PM_DATA_MEMCTRL]
+- str tmp1, .memtype
+- ldr tmp1, [r0, #PM_DATA_MODE]
+- str tmp1, .pm_mode
+- ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
+- str tmp1, .mckr_offset
+- ldr tmp1, [r0, #PM_DATA_PMC_VERSION]
+- str tmp1, .pmc_version
+- /* Both ldrne below are here to preload their address in the TLB */
+- ldr tmp1, [r0, #PM_DATA_SHDWC]
+- str tmp1, .shdwc
+- cmp tmp1, #0
+- ldrne tmp2, [tmp1, #0]
+- ldr tmp1, [r0, #PM_DATA_SFRBU]
+- str tmp1, .sfrbu
+- cmp tmp1, #0
+- ldrne tmp2, [tmp1, #0x10]
++ /* Active SDRAM self-refresh mode */
++ mov r3, #1
++ str r3, [r2, #AT91_MC_SDRAMC_SRR]
++ b sr_ena_exit
+
+- /* Active the self-refresh mode */
+- mov r0, #SRAMC_SELF_FRESH_ACTIVE
+- bl at91_sramc_self_refresh
++sr_ena_ddrc_sf:
++ cmp r1, #AT91_MEMCTRL_DDRSDR
++ bne sr_ena_sdramc_sf
+
+- ldr r0, .pm_mode
+- cmp r0, #AT91_PM_STANDBY
+- beq standby
+- cmp r0, #AT91_PM_BACKUP
+- beq backup_mode
++ /*
++ * DDR Memory controller
++ */
+
+- bl at91_ulp_mode
+- b exit_suspend
++ /* LPDDR1 --> force DDR2 mode during self-refresh */
++ ldr r3, [r2, #AT91_DDRSDRC_MDR]
++ str r3, .saved_sam9_mdr
++ bic r3, r3, #~AT91_DDRSDRC_MD
++ cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
++ ldreq r3, [r2, #AT91_DDRSDRC_MDR]
++ biceq r3, r3, #AT91_DDRSDRC_MD
++ orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
++ streq r3, [r2, #AT91_DDRSDRC_MDR]
+
+-standby:
+- /* Wait for interrupt */
+- ldr pmc, .pmc_base
+- at91_cpu_idle
+- b exit_suspend
++ /* Active DDRC self-refresh mode */
++ ldr r3, [r2, #AT91_DDRSDRC_LPR]
++ str r3, .saved_sam9_lpr
++ bic r3, r3, #AT91_DDRSDRC_LPCB
++ orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
++ str r3, [r2, #AT91_DDRSDRC_LPR]
+
+-backup_mode:
+- bl at91_backup_mode
+- b exit_suspend
++ /* If using the 2nd ddr controller */
++ ldr r2, .sramc1_base
++ cmp r2, #0
++ beq sr_ena_no_2nd_ddrc
+
+-exit_suspend:
+- /* Exit the self-refresh mode */
+- mov r0, #SRAMC_SELF_FRESH_EXIT
+- bl at91_sramc_self_refresh
++ ldr r3, [r2, #AT91_DDRSDRC_MDR]
++ str r3, .saved_sam9_mdr1
++ bic r3, r3, #~AT91_DDRSDRC_MD
++ cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
++ ldreq r3, [r2, #AT91_DDRSDRC_MDR]
++ biceq r3, r3, #AT91_DDRSDRC_MD
++ orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
++ streq r3, [r2, #AT91_DDRSDRC_MDR]
+
+- /* Restore registers, and return */
+- ldmfd sp!, {r4 - r12, pc}
+-ENDPROC(at91_pm_suspend_in_sram)
++ /* Active DDRC self-refresh mode */
++ ldr r3, [r2, #AT91_DDRSDRC_LPR]
++ str r3, .saved_sam9_lpr1
++ bic r3, r3, #AT91_DDRSDRC_LPCB
++ orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
++ str r3, [r2, #AT91_DDRSDRC_LPR]
+
+-ENTRY(at91_backup_mode)
+- /* Switch the master clock source to slow clock. */
+- ldr pmc, .pmc_base
+- ldr tmp2, .mckr_offset
+- ldr tmp1, [pmc, tmp2]
+- bic tmp1, tmp1, #AT91_PMC_CSS
+- str tmp1, [pmc, tmp2]
++sr_ena_no_2nd_ddrc:
++ b sr_ena_exit
+
+- wait_mckrdy
++ /*
++ * SDRAMC Memory controller
++ */
++sr_ena_sdramc_sf:
++ /* Active SDRAMC self-refresh mode */
++ ldr r3, [r2, #AT91_SDRAMC_LPR]
++ str r3, .saved_sam9_lpr
++ bic r3, r3, #AT91_SDRAMC_LPCB
++ orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
++ str r3, [r2, #AT91_SDRAMC_LPR]
+
+- /*BUMEN*/
+- ldr r0, .sfrbu
+- mov tmp1, #0x1
+- str tmp1, [r0, #0x10]
++ ldr r3, .saved_sam9_lpr
++ str r3, [r2, #AT91_SDRAMC_LPR]
+
+- /* Shutdown */
+- ldr r0, .shdwc
+- mov tmp1, #0xA5000000
+- add tmp1, tmp1, #0x1
+- str tmp1, [r0, #0]
+-ENDPROC(at91_backup_mode)
++sr_ena_exit:
++.endm
++
++/**
++ * Disable self-refresh
++ *
++ * register usage:
++ * @r1: memory type
++ * @r2: base address of the sram controller
++ * @r3: temporary
++ */
++.macro at91_sramc_self_refresh_dis
++ ldr r1, .memtype
++ ldr r2, .sramc_base
++
++ cmp r1, #AT91_MEMCTRL_MC
++ bne sr_dis_ddrc_exit_sf
++
++ /*
++ * at91rm9200 Memory controller
++ */
++
++ /*
++ * For exiting the self-refresh mode, do nothing,
++ * automatically exit the self-refresh mode.
++ */
++ b sr_dis_exit
++
++sr_dis_ddrc_exit_sf:
++ cmp r1, #AT91_MEMCTRL_DDRSDR
++ bne sdramc_exit_sf
++
++ /* DDR Memory controller */
++
++ /* Restore MDR in case of LPDDR1 */
++ ldr r3, .saved_sam9_mdr
++ str r3, [r2, #AT91_DDRSDRC_MDR]
++ /* Restore LPR on AT91 with DDRAM */
++ ldr r3, .saved_sam9_lpr
++ str r3, [r2, #AT91_DDRSDRC_LPR]
++
++ /* If using the 2nd ddr controller */
++ ldr r2, .sramc1_base
++ cmp r2, #0
++ ldrne r3, .saved_sam9_mdr1
++ strne r3, [r2, #AT91_DDRSDRC_MDR]
++ ldrne r3, .saved_sam9_lpr1
++ strne r3, [r2, #AT91_DDRSDRC_LPR]
++
++ b sr_dis_exit
++
++sdramc_exit_sf:
++ /* SDRAMC Memory controller */
++ ldr r3, .saved_sam9_lpr
++ str r3, [r2, #AT91_SDRAMC_LPR]
++
++sr_dis_exit:
++.endm
+
+ .macro at91_pm_ulp0_mode
+ ldr pmc, .pmc_base
+@@ -503,7 +552,7 @@ ENDPROC(at91_backup_mode)
+ 2:
+ .endm
+
+-ENTRY(at91_ulp_mode)
++.macro at91_ulp_mode
+ ldr pmc, .pmc_base
+ ldr tmp2, .mckr_offset
+ ldr tmp3, .pm_mode
+@@ -552,133 +601,97 @@ ulp_exit:
+
+ wait_mckrdy
+
+- mov pc, lr
+-ENDPROC(at91_ulp_mode)
+-
+-/*
+- * void at91_sramc_self_refresh(unsigned int is_active)
+- *
+- * @input param:
+- * @r0: 1 - active self-refresh mode
+- * 0 - exit self-refresh mode
+- * register usage:
+- * @r1: memory type
+- * @r2: base address of the sram controller
+- */
+-
+-ENTRY(at91_sramc_self_refresh)
+- ldr r1, .memtype
+- ldr r2, .sramc_base
+-
+- cmp r1, #AT91_MEMCTRL_MC
+- bne ddrc_sf
+-
+- /*
+- * at91rm9200 Memory controller
+- */
+-
+- /*
+- * For exiting the self-refresh mode, do nothing,
+- * automatically exit the self-refresh mode.
+- */
+- tst r0, #SRAMC_SELF_FRESH_ACTIVE
+- beq exit_sramc_sf
+-
+- /* Active SDRAM self-refresh mode */
+- mov r3, #1
+- str r3, [r2, #AT91_MC_SDRAMC_SRR]
+- b exit_sramc_sf
+-
+-ddrc_sf:
+- cmp r1, #AT91_MEMCTRL_DDRSDR
+- bne sdramc_sf
++.endm
+
+- /*
+- * DDR Memory controller
+- */
+- tst r0, #SRAMC_SELF_FRESH_ACTIVE
+- beq ddrc_exit_sf
++.macro at91_backup_mode
++ /* Switch the master clock source to slow clock. */
++ ldr pmc, .pmc_base
++ ldr tmp2, .mckr_offset
++ ldr tmp1, [pmc, tmp2]
++ bic tmp1, tmp1, #AT91_PMC_CSS
++ str tmp1, [pmc, tmp2]
+
+- /* LPDDR1 --> force DDR2 mode during self-refresh */
+- ldr r3, [r2, #AT91_DDRSDRC_MDR]
+- str r3, .saved_sam9_mdr
+- bic r3, r3, #~AT91_DDRSDRC_MD
+- cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+- ldreq r3, [r2, #AT91_DDRSDRC_MDR]
+- biceq r3, r3, #AT91_DDRSDRC_MD
+- orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
+- streq r3, [r2, #AT91_DDRSDRC_MDR]
++ wait_mckrdy
+
+- /* Active DDRC self-refresh mode */
+- ldr r3, [r2, #AT91_DDRSDRC_LPR]
+- str r3, .saved_sam9_lpr
+- bic r3, r3, #AT91_DDRSDRC_LPCB
+- orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+- str r3, [r2, #AT91_DDRSDRC_LPR]
++ /*BUMEN*/
++ ldr r0, .sfrbu
++ mov tmp1, #0x1
++ str tmp1, [r0, #0x10]
+
+- /* If using the 2nd ddr controller */
+- ldr r2, .sramc1_base
+- cmp r2, #0
+- beq no_2nd_ddrc
++ /* Shutdown */
++ ldr r0, .shdwc
++ mov tmp1, #0xA5000000
++ add tmp1, tmp1, #0x1
++ str tmp1, [r0, #0]
++.endm
+
+- ldr r3, [r2, #AT91_DDRSDRC_MDR]
+- str r3, .saved_sam9_mdr1
+- bic r3, r3, #~AT91_DDRSDRC_MD
+- cmp r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+- ldreq r3, [r2, #AT91_DDRSDRC_MDR]
+- biceq r3, r3, #AT91_DDRSDRC_MD
+- orreq r3, r3, #AT91_DDRSDRC_MD_DDR2
+- streq r3, [r2, #AT91_DDRSDRC_MDR]
++/*
++ * void at91_suspend_sram_fn(struct at91_pm_data*)
++ * @input param:
++ * @r0: base address of struct at91_pm_data
++ */
++/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
++ .align 3
++ENTRY(at91_pm_suspend_in_sram)
++ /* Save registers on stack */
++ stmfd sp!, {r4 - r12, lr}
+
+- /* Active DDRC self-refresh mode */
+- ldr r3, [r2, #AT91_DDRSDRC_LPR]
+- str r3, .saved_sam9_lpr1
+- bic r3, r3, #AT91_DDRSDRC_LPCB
+- orr r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+- str r3, [r2, #AT91_DDRSDRC_LPR]
++ /* Drain write buffer */
++ mov tmp1, #0
++ mcr p15, 0, tmp1, c7, c10, 4
+
+-no_2nd_ddrc:
+- b exit_sramc_sf
++ ldr tmp1, [r0, #PM_DATA_PMC]
++ str tmp1, .pmc_base
++ ldr tmp1, [r0, #PM_DATA_RAMC0]
++ str tmp1, .sramc_base
++ ldr tmp1, [r0, #PM_DATA_RAMC1]
++ str tmp1, .sramc1_base
++ ldr tmp1, [r0, #PM_DATA_MEMCTRL]
++ str tmp1, .memtype
++ ldr tmp1, [r0, #PM_DATA_MODE]
++ str tmp1, .pm_mode
++ ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
++ str tmp1, .mckr_offset
++ ldr tmp1, [r0, #PM_DATA_PMC_VERSION]
++ str tmp1, .pmc_version
++ /* Both ldrne below are here to preload their address in the TLB */
++ ldr tmp1, [r0, #PM_DATA_SHDWC]
++ str tmp1, .shdwc
++ cmp tmp1, #0
++ ldrne tmp2, [tmp1, #0]
++ ldr tmp1, [r0, #PM_DATA_SFRBU]
++ str tmp1, .sfrbu
++ cmp tmp1, #0
++ ldrne tmp2, [tmp1, #0x10]
+
+-ddrc_exit_sf:
+- /* Restore MDR in case of LPDDR1 */
+- ldr r3, .saved_sam9_mdr
+- str r3, [r2, #AT91_DDRSDRC_MDR]
+- /* Restore LPR on AT91 with DDRAM */
+- ldr r3, .saved_sam9_lpr
+- str r3, [r2, #AT91_DDRSDRC_LPR]
++ /* Active the self-refresh mode */
++ at91_sramc_self_refresh_ena
+
+- /* If using the 2nd ddr controller */
+- ldr r2, .sramc1_base
+- cmp r2, #0
+- ldrne r3, .saved_sam9_mdr1
+- strne r3, [r2, #AT91_DDRSDRC_MDR]
+- ldrne r3, .saved_sam9_lpr1
+- strne r3, [r2, #AT91_DDRSDRC_LPR]
++ ldr r0, .pm_mode
++ cmp r0, #AT91_PM_STANDBY
++ beq standby
++ cmp r0, #AT91_PM_BACKUP
++ beq backup_mode
+
+- b exit_sramc_sf
++ at91_ulp_mode
++ b exit_suspend
+
+- /*
+- * SDRAMC Memory controller
+- */
+-sdramc_sf:
+- tst r0, #SRAMC_SELF_FRESH_ACTIVE
+- beq sdramc_exit_sf
++standby:
++ /* Wait for interrupt */
++ ldr pmc, .pmc_base
++ at91_cpu_idle
++ b exit_suspend
+
+- /* Active SDRAMC self-refresh mode */
+- ldr r3, [r2, #AT91_SDRAMC_LPR]
+- str r3, .saved_sam9_lpr
+- bic r3, r3, #AT91_SDRAMC_LPCB
+- orr r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+- str r3, [r2, #AT91_SDRAMC_LPR]
++backup_mode:
++ at91_backup_mode
+
+-sdramc_exit_sf:
+- ldr r3, .saved_sam9_lpr
+- str r3, [r2, #AT91_SDRAMC_LPR]
++exit_suspend:
++ /* Exit the self-refresh mode */
++ at91_sramc_self_refresh_dis
+
+-exit_sramc_sf:
+- mov pc, lr
+-ENDPROC(at91_sramc_self_refresh)
++ /* Restore registers, and return */
++ ldmfd sp!, {r4 - r12, pc}
++ENDPROC(at91_pm_suspend_in_sram)
+
+ .pmc_base:
+ .word 0
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/204-ARM-at91-pm-s-CONFIG_SOC_SAM9X60-CONFIG_HAVE_AT91_SA.patch b/target/linux/at91/patches-5.10/204-ARM-at91-pm-s-CONFIG_SOC_SAM9X60-CONFIG_HAVE_AT91_SA.patch
new file mode 100644
index 0000000000..b9db3622e8
--- /dev/null
+++ b/target/linux/at91/patches-5.10/204-ARM-at91-pm-s-CONFIG_SOC_SAM9X60-CONFIG_HAVE_AT91_SA.patch
@@ -0,0 +1,41 @@
+From 673d2519e9028dafb678fac29a990740958bed3c Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:49:54 +0300
+Subject: [PATCH 204/247] ARM: at91: pm:
+ s/CONFIG_SOC_SAM9X60/CONFIG_HAVE_AT91_SAM9X60_PLL/g
+
+Replace CONFIG_SOC_SAM9X60 with CONFIG_HAVE_AT91_SAM9X60_PLL as the
+SAM9X60's PLL is also present on SAMA7G5.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-9-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm_suspend.S | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
+index 960ad29cce51..1f63bbfad728 100644
+--- a/arch/arm/mach-at91/pm_suspend.S
++++ b/arch/arm/mach-at91/pm_suspend.S
+@@ -422,7 +422,7 @@ sr_dis_exit:
+ cmp tmp1, #AT91_PMC_V1
+ beq 1f
+
+-#ifdef CONFIG_SOC_SAM9X60
++#ifdef CONFIG_HAVE_AT91_SAM9X60_PLL
+ /* Save PLLA settings. */
+ ldr tmp2, [pmc, #AT91_PMC_PLL_UPDT]
+ bic tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID
+@@ -489,7 +489,7 @@ sr_dis_exit:
+ cmp tmp3, #AT91_PMC_V1
+ beq 4f
+
+-#ifdef CONFIG_SOC_SAM9X60
++#ifdef CONFIG_HAVE_AT91_SAM9X60_PLL
+ /* step 1. */
+ ldr tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+ bic tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/205-ARM-at91-pm-add-support-for-waiting-MCK1.4.patch b/target/linux/at91/patches-5.10/205-ARM-at91-pm-add-support-for-waiting-MCK1.4.patch
new file mode 100644
index 0000000000..64c92ac05a
--- /dev/null
+++ b/target/linux/at91/patches-5.10/205-ARM-at91-pm-add-support-for-waiting-MCK1.4.patch
@@ -0,0 +1,155 @@
+From 67face049c62cb37cf93da26b7fea037228d1d3d Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:49:55 +0300
+Subject: [PATCH 205/247] ARM: at91: pm: add support for waiting MCK1..4
+
+SAMA7G5 has 5 master clocks 0..4. MCK0 is controlled differently than
+MCK 1..4. MCK 1..4 should also be saved/restored in the last phase of
+suspend/resume. Thus, adapt wait_mckrdy to support also MCK1..4.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-10-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm_suspend.S | 48 ++++++++++++++++++++++++---------
+ 1 file changed, 35 insertions(+), 13 deletions(-)
+
+diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
+index 1f63bbfad728..7669b32d5257 100644
+--- a/arch/arm/mach-at91/pm_suspend.S
++++ b/arch/arm/mach-at91/pm_suspend.S
+@@ -22,11 +22,23 @@ tmp3 .req r6
+
+ /*
+ * Wait until master clock is ready (after switching master clock source)
++ *
++ * @r_mckid: register holding master clock identifier
++ *
++ * Side effects: overwrites r7, r8
+ */
+- .macro wait_mckrdy
+-1: ldr tmp1, [pmc, #AT91_PMC_SR]
+- tst tmp1, #AT91_PMC_MCKRDY
+- beq 1b
++ .macro wait_mckrdy r_mckid
++#ifdef CONFIG_SOC_SAMA7
++ cmp \r_mckid, #0
++ beq 1f
++ mov r7, #AT91_PMC_MCKXRDY
++ b 2f
++#endif
++1: mov r7, #AT91_PMC_MCKRDY
++2: ldr r8, [pmc, #AT91_PMC_SR]
++ and r8, r7
++ cmp r8, r7
++ bne 2b
+ .endm
+
+ /*
+@@ -231,7 +243,9 @@ sr_dis_exit:
+ bic tmp1, tmp1, #AT91_PMC_PRES
+ orr tmp1, tmp1, #AT91_PMC_PRES_64
+ str tmp1, [pmc, tmp3]
+- wait_mckrdy
++
++ mov tmp3, #0
++ wait_mckrdy tmp3
+ b 1f
+
+ 0:
+@@ -267,10 +281,13 @@ sr_dis_exit:
+ bne 5f
+
+ /* Set lowest prescaler for fast resume. */
++ ldr tmp3, .mckr_offset
+ ldr tmp1, [pmc, tmp3]
+ bic tmp1, tmp1, #AT91_PMC_PRES
+ str tmp1, [pmc, tmp3]
+- wait_mckrdy
++
++ mov tmp3, #0
++ wait_mckrdy tmp3
+ b 6f
+
+ 5: /* Restore RC oscillator state */
+@@ -307,6 +324,7 @@ sr_dis_exit:
+ .macro at91_pm_ulp1_mode
+ ldr pmc, .pmc_base
+ ldr tmp2, .mckr_offset
++ mov tmp3, #0
+
+ /* Save RC oscillator state and check if it is enabled. */
+ ldr tmp1, [pmc, #AT91_PMC_SR]
+@@ -348,7 +366,7 @@ sr_dis_exit:
+ orr tmp1, tmp1, #AT91_PMC_CSS_MAIN
+ str tmp1, [pmc, tmp2]
+
+- wait_mckrdy
++ wait_mckrdy tmp3
+
+ /* Enter the ULP1 mode by set WAITMODE bit in CKGR_MOR */
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+@@ -361,7 +379,7 @@ sr_dis_exit:
+ nop
+ nop
+
+- wait_mckrdy
++ wait_mckrdy tmp3
+
+ /* Enable the crystal oscillator */
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+@@ -377,7 +395,7 @@ sr_dis_exit:
+ bic tmp1, tmp1, #AT91_PMC_CSS
+ str tmp1, [pmc, tmp2]
+
+- wait_mckrdy
++ wait_mckrdy tmp3
+
+ /* Switch main clock source to crystal oscillator */
+ ldr tmp1, [pmc, #AT91_CKGR_MOR]
+@@ -394,7 +412,7 @@ sr_dis_exit:
+ orr tmp1, tmp1, #AT91_PMC_CSS_MAIN
+ str tmp1, [pmc, tmp2]
+
+- wait_mckrdy
++ wait_mckrdy tmp3
+
+ /* Restore RC oscillator state */
+ ldr tmp1, .saved_osc_status
+@@ -573,10 +591,12 @@ sr_dis_exit:
+ save_mck:
+ str tmp1, [pmc, tmp2]
+
+- wait_mckrdy
++ mov tmp3, #0
++ wait_mckrdy tmp3
+
+ at91_plla_disable
+
++ ldr tmp3, .pm_mode
+ cmp tmp3, #AT91_PM_ULP1
+ beq ulp1_mode
+
+@@ -599,7 +619,8 @@ ulp_exit:
+ ldr tmp2, .saved_mckr
+ str tmp2, [pmc, tmp1]
+
+- wait_mckrdy
++ mov tmp3, #0
++ wait_mckrdy tmp3
+
+ .endm
+
+@@ -611,7 +632,8 @@ ulp_exit:
+ bic tmp1, tmp1, #AT91_PMC_CSS
+ str tmp1, [pmc, tmp2]
+
+- wait_mckrdy
++ mov tmp3, #0
++ wait_mckrdy tmp3
+
+ /*BUMEN*/
+ ldr r0, .sfrbu
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/206-ARM-at91-sfrbu-add-sfrbu-registers-definitions-for-s.patch b/target/linux/at91/patches-5.10/206-ARM-at91-sfrbu-add-sfrbu-registers-definitions-for-s.patch
new file mode 100644
index 0000000000..cf7619d45e
--- /dev/null
+++ b/target/linux/at91/patches-5.10/206-ARM-at91-sfrbu-add-sfrbu-registers-definitions-for-s.patch
@@ -0,0 +1,59 @@
+From c6b435625975d9a6daeffd81509a9877ddfb93b5 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:49:56 +0300
+Subject: [PATCH 206/247] ARM: at91: sfrbu: add sfrbu registers definitions for
+ sama7g5
+
+Add SFRBU registers definitions for SAMA7G5.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-11-claudiu.beznea@microchip.com
+---
+ include/soc/at91/sama7-sfrbu.h | 34 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+ create mode 100644 include/soc/at91/sama7-sfrbu.h
+
+diff --git a/include/soc/at91/sama7-sfrbu.h b/include/soc/at91/sama7-sfrbu.h
+new file mode 100644
+index 000000000000..76b740810d34
+--- /dev/null
++++ b/include/soc/at91/sama7-sfrbu.h
+@@ -0,0 +1,34 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++/*
++ * Microchip SAMA7 SFRBU registers offsets and bit definitions.
++ *
++ * Copyright (C) [2020] Microchip Technology Inc. and its subsidiaries
++ *
++ * Author: Claudu Beznea <claudiu.beznea@microchip.com>
++ */
++
++#ifndef __SAMA7_SFRBU_H__
++#define __SAMA7_SFRBU_H__
++
++#ifdef CONFIG_SOC_SAMA7
++
++#define AT91_SFRBU_PSWBU (0x00) /* SFRBU Power Switch BU Control Register */
++#define AT91_SFRBU_PSWBU_PSWKEY (0x4BD20C << 8) /* Specific value mandatory to allow writing of other register bits */
++#define AT91_SFRBU_PSWBU_STATE (1 << 2) /* Power switch BU state */
++#define AT91_SFRBU_PSWBU_SOFTSWITCH (1 << 1) /* Power switch BU source selection */
++#define AT91_SFRBU_PSWBU_CTRL (1 << 0) /* Power switch BU control */
++
++#define AT91_SFRBU_25LDOCR (0x0C) /* SFRBU 2.5V LDO Control Register */
++#define AT91_SFRBU_25LDOCR_LDOANAKEY (0x3B6E18 << 8) /* Specific value mandatory to allow writing of other register bits. */
++#define AT91_SFRBU_25LDOCR_STATE (1 << 3) /* LDOANA Switch On/Off Control */
++#define AT91_SFRBU_25LDOCR_LP (1 << 2) /* LDOANA Low-Power Mode Control */
++#define AT91_SFRBU_PD_VALUE_MSK (0x3)
++#define AT91_SFRBU_25LDOCR_PD_VALUE(v) ((v) & AT91_SFRBU_PD_VALUE_MSK) /* LDOANA Pull-down value */
++
++#define AT91_FRBU_DDRPWR (0x10) /* SFRBU DDR Power Control Register */
++#define AT91_FRBU_DDRPWR_STATE (1 << 0) /* DDR Power Mode State */
++
++#endif /* CONFIG_SOC_SAMA7 */
++
++#endif /* __SAMA7_SFRBU_H__ */
++
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/207-ARM-at91-ddr-add-registers-definitions-for-sama7g5-s.patch b/target/linux/at91/patches-5.10/207-ARM-at91-ddr-add-registers-definitions-for-sama7g5-s.patch
new file mode 100644
index 0000000000..0414a28856
--- /dev/null
+++ b/target/linux/at91/patches-5.10/207-ARM-at91-ddr-add-registers-definitions-for-sama7g5-s.patch
@@ -0,0 +1,105 @@
+From 0005be9abfcddf9a29c6d07afe06caa41560d424 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:49:57 +0300
+Subject: [PATCH 207/247] ARM: at91: ddr: add registers definitions for
+ sama7g5's ddr
+
+Add registers and bits definitions for SAMA7G5's UDDRC and DDR3PHY.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-12-claudiu.beznea@microchip.com
+---
+ include/soc/at91/sama7-ddr.h | 80 ++++++++++++++++++++++++++++++++++++
+ 1 file changed, 80 insertions(+)
+ create mode 100644 include/soc/at91/sama7-ddr.h
+
+diff --git a/include/soc/at91/sama7-ddr.h b/include/soc/at91/sama7-ddr.h
+new file mode 100644
+index 000000000000..f6542584ca13
+--- /dev/null
++++ b/include/soc/at91/sama7-ddr.h
+@@ -0,0 +1,80 @@
++/* SPDX-License-Identifier: GPL-2.0-only */
++/*
++ * Microchip SAMA7 UDDR Controller and DDR3 PHY Controller registers offsets
++ * and bit definitions.
++ *
++ * Copyright (C) [2020] Microchip Technology Inc. and its subsidiaries
++ *
++ * Author: Claudu Beznea <claudiu.beznea@microchip.com>
++ */
++
++#ifndef __SAMA7_DDR_H__
++#define __SAMA7_DDR_H__
++
++#ifdef CONFIG_SOC_SAMA7
++
++/* DDR3PHY */
++#define DDR3PHY_PIR (0x04) /* DDR3PHY PHY Initialization Register */
++#define DDR3PHY_PIR_DLLBYP (1 << 17) /* DLL Bypass */
++#define DDR3PHY_PIR_ITMSRST (1 << 4) /* Interface Timing Module Soft Reset */
++#define DDR3PHY_PIR_DLLLOCK (1 << 2) /* DLL Lock */
++#define DDR3PHY_PIR_DLLSRST (1 << 1) /* DLL Soft Rest */
++#define DDR3PHY_PIR_INIT (1 << 0) /* Initialization Trigger */
++
++#define DDR3PHY_PGCR (0x08) /* DDR3PHY PHY General Configuration Register */
++#define DDR3PHY_PGCR_CKDV1 (1 << 13) /* CK# Disable Value */
++#define DDR3PHY_PGCR_CKDV0 (1 << 12) /* CK Disable Value */
++
++#define DDR3PHY_PGSR (0x0C) /* DDR3PHY PHY General Status Register */
++#define DDR3PHY_PGSR_IDONE (1 << 0) /* Initialization Done */
++
++#define DDR3PHY_ACIOCR (0x24) /* DDR3PHY AC I/O Configuration Register */
++#define DDR3PHY_ACIOCR_CSPDD_CS0 (1 << 18) /* CS#[0] Power Down Driver */
++#define DDR3PHY_ACIOCR_CKPDD_CK0 (1 << 8) /* CK[0] Power Down Driver */
++#define DDR3PHY_ACIORC_ACPDD (1 << 3) /* AC Power Down Driver */
++
++#define DDR3PHY_DXCCR (0x28) /* DDR3PHY DATX8 Common Configuration Register */
++#define DDR3PHY_DXCCR_DXPDR (1 << 3) /* Data Power Down Receiver */
++
++#define DDR3PHY_DSGCR (0x2C) /* DDR3PHY DDR System General Configuration Register */
++#define DDR3PHY_DSGCR_ODTPDD_ODT0 (1 << 20) /* ODT[0] Power Down Driver */
++
++#define DDR3PHY_ZQ0SR0 (0x188) /* ZQ status register 0 */
++
++/* UDDRC */
++#define UDDRC_STAT (0x04) /* UDDRC Operating Mode Status Register */
++#define UDDRC_STAT_SELFREF_TYPE_DIS (0x0 << 4) /* SDRAM is not in Self-refresh */
++#define UDDRC_STAT_SELFREF_TYPE_PHY (0x1 << 4) /* SDRAM is in Self-refresh, which was caused by PHY Master Request */
++#define UDDRC_STAT_SELFREF_TYPE_SW (0x2 << 4) /* SDRAM is in Self-refresh, which was not caused solely under Automatic Self-refresh control */
++#define UDDRC_STAT_SELFREF_TYPE_AUTO (0x3 << 4) /* SDRAM is in Self-refresh, which was caused by Automatic Self-refresh only */
++#define UDDRC_STAT_SELFREF_TYPE_MSK (0x3 << 4) /* Self-refresh type mask */
++#define UDDRC_STAT_OPMODE_INIT (0x0 << 0) /* Init */
++#define UDDRC_STAT_OPMODE_NORMAL (0x1 << 0) /* Normal */
++#define UDDRC_STAT_OPMODE_PWRDOWN (0x2 << 0) /* Power-down */
++#define UDDRC_STAT_OPMODE_SELF_REFRESH (0x3 << 0) /* Self-refresh */
++#define UDDRC_STAT_OPMODE_MSK (0x7 << 0) /* Operating mode mask */
++
++#define UDDRC_PWRCTL (0x30) /* UDDRC Low Power Control Register */
++#define UDDRC_PWRCTRL_SELFREF_SW (1 << 5) /* Software self-refresh */
++
++#define UDDRC_DFIMISC (0x1B0) /* UDDRC DFI Miscellaneous Control Register */
++#define UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN (1 << 0) /* PHY initialization complete enable signal */
++
++#define UDDRC_SWCTRL (0x320) /* UDDRC Software Register Programming Control Enable */
++#define UDDRC_SWCTRL_SW_DONE (1 << 0) /* Enable quasi-dynamic register programming outside reset */
++
++#define UDDRC_SWSTAT (0x324) /* UDDRC Software Register Programming Control Status */
++#define UDDRC_SWSTAT_SW_DONE_ACK (1 << 0) /* Register programming done */
++
++#define UDDRC_PSTAT (0x3FC) /* UDDRC Port Status Register */
++#define UDDRC_PSTAT_ALL_PORTS (0x1F001F) /* Read + writes outstanding transactions on all ports */
++
++#define UDDRC_PCTRL_0 (0x490) /* UDDRC Port 0 Control Register */
++#define UDDRC_PCTRL_1 (0x540) /* UDDRC Port 1 Control Register */
++#define UDDRC_PCTRL_2 (0x5F0) /* UDDRC Port 2 Control Register */
++#define UDDRC_PCTRL_3 (0x6A0) /* UDDRC Port 3 Control Register */
++#define UDDRC_PCTRL_4 (0x750) /* UDDRC Port 4 Control Register */
++
++#endif /* CONFIG_SOC_SAMA7 */
++
++#endif /* __SAMA7_DDR_H__ */
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/208-ARM-at91-pm-add-self-refresh-support-for-sama7g5.patch b/target/linux/at91/patches-5.10/208-ARM-at91-pm-add-self-refresh-support-for-sama7g5.patch
new file mode 100644
index 0000000000..344b14c4d9
--- /dev/null
+++ b/target/linux/at91/patches-5.10/208-ARM-at91-pm-add-self-refresh-support-for-sama7g5.patch
@@ -0,0 +1,283 @@
+From 1bfd85d71703f80392a71043caf74f159bec97b8 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:49:58 +0300
+Subject: [PATCH 208/247] ARM: at91: pm: add self-refresh support for sama7g5
+
+Add self-refresh support for SAMA7G5.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-13-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.h | 2 +
+ arch/arm/mach-at91/pm_data-offsets.c | 2 +
+ arch/arm/mach-at91/pm_suspend.S | 199 +++++++++++++++++++++++++++
+ 3 files changed, 203 insertions(+)
+
+diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
+index bfb260be371e..666474088d55 100644
+--- a/arch/arm/mach-at91/pm.h
++++ b/arch/arm/mach-at91/pm.h
+@@ -12,6 +12,7 @@
+ #include <linux/mfd/syscon/atmel-mc.h>
+ #include <soc/at91/at91sam9_ddrsdr.h>
+ #include <soc/at91/at91sam9_sdramc.h>
++#include <soc/at91/sama7-ddr.h>
+
+ #define AT91_MEMCTRL_MC 0
+ #define AT91_MEMCTRL_SDRAMC 1
+@@ -27,6 +28,7 @@
+ struct at91_pm_data {
+ void __iomem *pmc;
+ void __iomem *ramc[2];
++ void __iomem *ramc_phy;
+ unsigned long uhp_udp_mask;
+ unsigned int memctrl;
+ unsigned int mode;
+diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
+index 82089ff258c0..40bd4e8fe40a 100644
+--- a/arch/arm/mach-at91/pm_data-offsets.c
++++ b/arch/arm/mach-at91/pm_data-offsets.c
+@@ -8,6 +8,8 @@ int main(void)
+ DEFINE(PM_DATA_PMC, offsetof(struct at91_pm_data, pmc));
+ DEFINE(PM_DATA_RAMC0, offsetof(struct at91_pm_data, ramc[0]));
+ DEFINE(PM_DATA_RAMC1, offsetof(struct at91_pm_data, ramc[1]));
++ DEFINE(PM_DATA_RAMC_PHY, offsetof(struct at91_pm_data,
++ ramc_phy));
+ DEFINE(PM_DATA_MEMCTRL, offsetof(struct at91_pm_data, memctrl));
+ DEFINE(PM_DATA_MODE, offsetof(struct at91_pm_data, mode));
+ DEFINE(PM_DATA_SHDWC, offsetof(struct at91_pm_data, shdwc));
+diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
+index 7669b32d5257..84418120ba67 100644
+--- a/arch/arm/mach-at91/pm_suspend.S
++++ b/arch/arm/mach-at91/pm_suspend.S
+@@ -87,6 +87,200 @@ tmp3 .req r6
+
+ .arm
+
++#ifdef CONFIG_SOC_SAMA7
++/**
++ * Enable self-refresh
++ *
++ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3, r7
++ */
++.macro at91_sramc_self_refresh_ena
++ ldr r2, .sramc_base
++ ldr r3, .sramc_phy_base
++ ldr r7, .pm_mode
++
++ dsb
++
++ /* Disable all AXI ports. */
++ ldr tmp1, [r2, #UDDRC_PCTRL_0]
++ bic tmp1, tmp1, #0x1
++ str tmp1, [r2, #UDDRC_PCTRL_0]
++
++ ldr tmp1, [r2, #UDDRC_PCTRL_1]
++ bic tmp1, tmp1, #0x1
++ str tmp1, [r2, #UDDRC_PCTRL_1]
++
++ ldr tmp1, [r2, #UDDRC_PCTRL_2]
++ bic tmp1, tmp1, #0x1
++ str tmp1, [r2, #UDDRC_PCTRL_2]
++
++ ldr tmp1, [r2, #UDDRC_PCTRL_3]
++ bic tmp1, tmp1, #0x1
++ str tmp1, [r2, #UDDRC_PCTRL_3]
++
++ ldr tmp1, [r2, #UDDRC_PCTRL_4]
++ bic tmp1, tmp1, #0x1
++ str tmp1, [r2, #UDDRC_PCTRL_4]
++
++sr_ena_1:
++ /* Wait for all ports to disable. */
++ ldr tmp1, [r2, #UDDRC_PSTAT]
++ ldr tmp2, =UDDRC_PSTAT_ALL_PORTS
++ tst tmp1, tmp2
++ bne sr_ena_1
++
++ /* Switch to self-refresh. */
++ ldr tmp1, [r2, #UDDRC_PWRCTL]
++ orr tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
++ str tmp1, [r2, #UDDRC_PWRCTL]
++
++sr_ena_2:
++ /* Wait for self-refresh enter. */
++ ldr tmp1, [r2, #UDDRC_STAT]
++ bic tmp1, tmp1, #~UDDRC_STAT_SELFREF_TYPE_MSK
++ cmp tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
++ bne sr_ena_2
++
++ /* Put DDR PHY's DLL in bypass mode for non-backup modes. */
++ cmp r7, #AT91_PM_BACKUP
++ beq sr_ena_3
++ ldr tmp1, [r3, #DDR3PHY_PIR]
++ orr tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
++ str tmp1, [r3, #DDR3PHY_PIR]
++
++sr_ena_3:
++ /* Power down DDR PHY data receivers. */
++ ldr tmp1, [r3, #DDR3PHY_DXCCR]
++ orr tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
++ str tmp1, [r3, #DDR3PHY_DXCCR]
++
++ /* Power down ADDR/CMD IO. */
++ ldr tmp1, [r3, #DDR3PHY_ACIOCR]
++ orr tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
++ orr tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
++ orr tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
++ str tmp1, [r3, #DDR3PHY_ACIOCR]
++
++ /* Power down ODT. */
++ ldr tmp1, [r3, #DDR3PHY_DSGCR]
++ orr tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
++ str tmp1, [r3, #DDR3PHY_DSGCR]
++.endm
++
++/**
++ * Disable self-refresh
++ *
++ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3
++ */
++.macro at91_sramc_self_refresh_dis
++ ldr r2, .sramc_base
++ ldr r3, .sramc_phy_base
++
++ /* Power up DDR PHY data receivers. */
++ ldr tmp1, [r3, #DDR3PHY_DXCCR]
++ bic tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
++ str tmp1, [r3, #DDR3PHY_DXCCR]
++
++ /* Power up the output of CK and CS pins. */
++ ldr tmp1, [r3, #DDR3PHY_ACIOCR]
++ bic tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
++ bic tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
++ bic tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
++ str tmp1, [r3, #DDR3PHY_ACIOCR]
++
++ /* Power up ODT. */
++ ldr tmp1, [r3, #DDR3PHY_DSGCR]
++ bic tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
++ str tmp1, [r3, #DDR3PHY_DSGCR]
++
++ /* Take DDR PHY's DLL out of bypass mode. */
++ ldr tmp1, [r3, #DDR3PHY_PIR]
++ bic tmp1, tmp1, #DDR3PHY_PIR_DLLBYP
++ str tmp1, [r3, #DDR3PHY_PIR]
++
++ /* Enable quasi-dynamic programming. */
++ mov tmp1, #0
++ str tmp1, [r2, #UDDRC_SWCTRL]
++
++ /* De-assert SDRAM initialization. */
++ ldr tmp1, [r2, #UDDRC_DFIMISC]
++ bic tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
++ str tmp1, [r2, #UDDRC_DFIMISC]
++
++ /* Quasi-dynamic programming done. */
++ mov tmp1, #UDDRC_SWCTRL_SW_DONE
++ str tmp1, [r2, #UDDRC_SWCTRL]
++
++sr_dis_1:
++ ldr tmp1, [r2, #UDDRC_SWSTAT]
++ tst tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
++ beq sr_dis_1
++
++ /* DLL soft-reset + DLL lock wait + ITM reset */
++ mov tmp1, #(DDR3PHY_PIR_INIT | DDR3PHY_PIR_DLLSRST | \
++ DDR3PHY_PIR_DLLLOCK | DDR3PHY_PIR_ITMSRST)
++ str tmp1, [r3, #DDR3PHY_PIR]
++
++sr_dis_4:
++ /* Wait for it. */
++ ldr tmp1, [r3, #DDR3PHY_PGSR]
++ tst tmp1, #DDR3PHY_PGSR_IDONE
++ beq sr_dis_4
++
++ /* Enable quasi-dynamic programming. */
++ mov tmp1, #0
++ str tmp1, [r2, #UDDRC_SWCTRL]
++
++ /* Assert PHY init complete enable signal. */
++ ldr tmp1, [r2, #UDDRC_DFIMISC]
++ orr tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
++ str tmp1, [r2, #UDDRC_DFIMISC]
++
++ /* Programming is done. Set sw_done. */
++ mov tmp1, #UDDRC_SWCTRL_SW_DONE
++ str tmp1, [r2, #UDDRC_SWCTRL]
++
++sr_dis_5:
++ /* Wait for it. */
++ ldr tmp1, [r2, #UDDRC_SWSTAT]
++ tst tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
++ beq sr_dis_5
++
++ /* Trigger self-refresh exit. */
++ ldr tmp1, [r2, #UDDRC_PWRCTL]
++ bic tmp1, tmp1, #UDDRC_PWRCTRL_SELFREF_SW
++ str tmp1, [r2, #UDDRC_PWRCTL]
++
++sr_dis_6:
++ /* Wait for self-refresh exit done. */
++ ldr tmp1, [r2, #UDDRC_STAT]
++ bic tmp1, tmp1, #~UDDRC_STAT_OPMODE_MSK
++ cmp tmp1, #UDDRC_STAT_OPMODE_NORMAL
++ bne sr_dis_6
++
++ /* Enable all AXI ports. */
++ ldr tmp1, [r2, #UDDRC_PCTRL_0]
++ orr tmp1, tmp1, #0x1
++ str tmp1, [r2, #UDDRC_PCTRL_0]
++
++ ldr tmp1, [r2, #UDDRC_PCTRL_1]
++ orr tmp1, tmp1, #0x1
++ str tmp1, [r2, #UDDRC_PCTRL_1]
++
++ ldr tmp1, [r2, #UDDRC_PCTRL_2]
++ orr tmp1, tmp1, #0x1
++ str tmp1, [r2, #UDDRC_PCTRL_2]
++
++ ldr tmp1, [r2, #UDDRC_PCTRL_3]
++ orr tmp1, tmp1, #0x1
++ str tmp1, [r2, #UDDRC_PCTRL_3]
++
++ ldr tmp1, [r2, #UDDRC_PCTRL_4]
++ orr tmp1, tmp1, #0x1
++ str tmp1, [r2, #UDDRC_PCTRL_4]
++
++ dsb
++.endm
++#else
+ /**
+ * Enable self-refresh
+ *
+@@ -228,6 +422,7 @@ sdramc_exit_sf:
+
+ sr_dis_exit:
+ .endm
++#endif
+
+ .macro at91_pm_ulp0_mode
+ ldr pmc, .pmc_base
+@@ -668,6 +863,8 @@ ENTRY(at91_pm_suspend_in_sram)
+ str tmp1, .sramc_base
+ ldr tmp1, [r0, #PM_DATA_RAMC1]
+ str tmp1, .sramc1_base
++ ldr tmp1, [r0, #PM_DATA_RAMC_PHY]
++ str tmp1, .sramc_phy_base
+ ldr tmp1, [r0, #PM_DATA_MEMCTRL]
+ str tmp1, .memtype
+ ldr tmp1, [r0, #PM_DATA_MODE]
+@@ -721,6 +918,8 @@ ENDPROC(at91_pm_suspend_in_sram)
+ .word 0
+ .sramc1_base:
+ .word 0
++.sramc_phy_base:
++ .word 0
+ .shdwc:
+ .word 0
+ .sfrbu:
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/209-ARM-at91-pm-add-support-for-MCK1.4-save-restore-for-.patch b/target/linux/at91/patches-5.10/209-ARM-at91-pm-add-support-for-MCK1.4-save-restore-for-.patch
new file mode 100644
index 0000000000..96f7811603
--- /dev/null
+++ b/target/linux/at91/patches-5.10/209-ARM-at91-pm-add-support-for-MCK1.4-save-restore-for-.patch
@@ -0,0 +1,170 @@
+From 9ee7fd7aa956671727752dac6bd131cf511c1137 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:49:59 +0300
+Subject: [PATCH 209/247] ARM: at91: pm: add support for MCK1..4 save/restore
+ for ulp modes
+
+Add support for MCK1..4 save restore for ULP modes.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-14-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm_suspend.S | 126 ++++++++++++++++++++++++++++++++
+ 1 file changed, 126 insertions(+)
+
+diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
+index 84418120ba67..8b0b8619ee8a 100644
+--- a/arch/arm/mach-at91/pm_suspend.S
++++ b/arch/arm/mach-at91/pm_suspend.S
+@@ -765,7 +765,122 @@ sr_dis_exit:
+ 2:
+ .endm
+
++/**
++ * at91_mckx_ps_enable: save MCK1..4 settings and switch it to main clock
++ *
++ * Side effects: overwrites tmp1, tmp2
++ */
++.macro at91_mckx_ps_enable
++#ifdef CONFIG_SOC_SAMA7
++ ldr pmc, .pmc_base
++
++ /* There are 4 MCKs we need to handle: MCK1..4 */
++ mov tmp1, #1
++e_loop: cmp tmp1, #5
++ beq e_done
++
++ /* Write MCK ID to retrieve the settings. */
++ str tmp1, [pmc, #AT91_PMC_MCR_V2]
++ ldr tmp2, [pmc, #AT91_PMC_MCR_V2]
++
++e_save_mck1:
++ cmp tmp1, #1
++ bne e_save_mck2
++ str tmp2, .saved_mck1
++ b e_ps
++
++e_save_mck2:
++ cmp tmp1, #2
++ bne e_save_mck3
++ str tmp2, .saved_mck2
++ b e_ps
++
++e_save_mck3:
++ cmp tmp1, #3
++ bne e_save_mck4
++ str tmp2, .saved_mck3
++ b e_ps
++
++e_save_mck4:
++ str tmp2, .saved_mck4
++
++e_ps:
++ /* Use CSS=MAINCK and DIV=1. */
++ bic tmp2, tmp2, #AT91_PMC_MCR_V2_CSS
++ bic tmp2, tmp2, #AT91_PMC_MCR_V2_DIV
++ orr tmp2, tmp2, #AT91_PMC_MCR_V2_CSS_MAINCK
++ orr tmp2, tmp2, #AT91_PMC_MCR_V2_DIV1
++ str tmp2, [pmc, #AT91_PMC_MCR_V2]
++
++ wait_mckrdy tmp1
++
++ add tmp1, tmp1, #1
++ b e_loop
++
++e_done:
++#endif
++.endm
++
++/**
++ * at91_mckx_ps_restore: restore MCK1..4 settings
++ *
++ * Side effects: overwrites tmp1, tmp2
++ */
++.macro at91_mckx_ps_restore
++#ifdef CONFIG_SOC_SAMA7
++ ldr pmc, .pmc_base
++
++ /* There are 4 MCKs we need to handle: MCK1..4 */
++ mov tmp1, #1
++r_loop: cmp tmp1, #5
++ beq r_done
++
++r_save_mck1:
++ cmp tmp1, #1
++ bne r_save_mck2
++ ldr tmp2, .saved_mck1
++ b r_ps
++
++r_save_mck2:
++ cmp tmp1, #2
++ bne r_save_mck3
++ ldr tmp2, .saved_mck2
++ b r_ps
++
++r_save_mck3:
++ cmp tmp1, #3
++ bne r_save_mck4
++ ldr tmp2, .saved_mck3
++ b r_ps
++
++r_save_mck4:
++ ldr tmp2, .saved_mck4
++
++r_ps:
++ /* Write MCK ID to retrieve the settings. */
++ str tmp1, [pmc, #AT91_PMC_MCR_V2]
++ ldr tmp3, [pmc, #AT91_PMC_MCR_V2]
++
++ /* We need to restore CSS and DIV. */
++ bic tmp3, tmp3, #AT91_PMC_MCR_V2_CSS
++ bic tmp3, tmp3, #AT91_PMC_MCR_V2_DIV
++ orr tmp3, tmp3, tmp2
++ bic tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK
++ orr tmp3, tmp3, tmp1
++ orr tmp3, tmp3, #AT91_PMC_MCR_V2_CMD
++ str tmp2, [pmc, #AT91_PMC_MCR_V2]
++
++ wait_mckrdy tmp1
++
++ add tmp1, tmp1, #1
++ b r_loop
++r_done:
++#endif
++.endm
++
+ .macro at91_ulp_mode
++ at91_mckx_ps_enable
++
+ ldr pmc, .pmc_base
+ ldr tmp2, .mckr_offset
+ ldr tmp3, .pm_mode
+@@ -817,6 +932,7 @@ ulp_exit:
+ mov tmp3, #0
+ wait_mckrdy tmp3
+
++ at91_mckx_ps_restore
+ .endm
+
+ .macro at91_backup_mode
+@@ -946,6 +1062,16 @@ ENDPROC(at91_pm_suspend_in_sram)
+ .word 0
+ .saved_osc_status:
+ .word 0
++#ifdef CONFIG_SOC_SAMA7
++.saved_mck1:
++ .word 0
++.saved_mck2:
++ .word 0
++.saved_mck3:
++ .word 0
++.saved_mck4:
++ .word 0
++#endif
+
+ ENTRY(at91_pm_suspend_in_sram_sz)
+ .word .-at91_pm_suspend_in_sram
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/210-ARM-at91-pm-add-support-for-2.5V-LDO-regulator-contr.patch b/target/linux/at91/patches-5.10/210-ARM-at91-pm-add-support-for-2.5V-LDO-regulator-contr.patch
new file mode 100644
index 0000000000..48638fa75e
--- /dev/null
+++ b/target/linux/at91/patches-5.10/210-ARM-at91-pm-add-support-for-2.5V-LDO-regulator-contr.patch
@@ -0,0 +1,86 @@
+From b2073cc043612bf95b115bd94103cfb2936f05bf Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:50:00 +0300
+Subject: [PATCH 210/247] ARM: at91: pm: add support for 2.5V LDO regulator
+ control
+
+Add support to disable/enable 2.5V LDO regulator when entering/exiting
+any ULP mode.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-15-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.h | 1 +
+ arch/arm/mach-at91/pm_suspend.S | 29 +++++++++++++++++++++++++++++
+ 2 files changed, 30 insertions(+)
+
+diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
+index 666474088d55..53bdc9000e44 100644
+--- a/arch/arm/mach-at91/pm.h
++++ b/arch/arm/mach-at91/pm.h
+@@ -13,6 +13,7 @@
+ #include <soc/at91/at91sam9_ddrsdr.h>
+ #include <soc/at91/at91sam9_sdramc.h>
+ #include <soc/at91/sama7-ddr.h>
++#include <soc/at91/sama7-sfrbu.h>
+
+ #define AT91_MEMCTRL_MC 0
+ #define AT91_MEMCTRL_SDRAMC 1
+diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
+index 8b0b8619ee8a..9c9e08fd8300 100644
+--- a/arch/arm/mach-at91/pm_suspend.S
++++ b/arch/arm/mach-at91/pm_suspend.S
+@@ -83,6 +83,29 @@ tmp3 .req r6
+
+ .endm
+
++/**
++ * Set state for 2.5V low power regulator
++ * @ena: 0 - disable regulator
++ * 1 - enable regulator
++ *
++ * Side effects: overwrites r7, r8, r9, r10
++ */
++ .macro at91_2_5V_reg_set_low_power ena
++#ifdef CONFIG_SOC_SAMA7
++ ldr r7, .sfrbu
++ mov r8, #\ena
++ ldr r9, [r7, #AT91_SFRBU_25LDOCR]
++ orr r9, r9, #AT91_SFRBU_25LDOCR_LP
++ cmp r8, #1
++ beq lp_done_\ena
++ bic r9, r9, #AT91_SFRBU_25LDOCR_LP
++lp_done_\ena:
++ ldr r10, =AT91_SFRBU_25LDOCR_LDOANAKEY
++ orr r9, r9, r10
++ str r9, [r7, #AT91_SFRBU_25LDOCR]
++#endif
++ .endm
++
+ .text
+
+ .arm
+@@ -906,6 +929,9 @@ save_mck:
+
+ at91_plla_disable
+
++ /* Enable low power mode for 2.5V regulator. */
++ at91_2_5V_reg_set_low_power 1
++
+ ldr tmp3, .pm_mode
+ cmp tmp3, #AT91_PM_ULP1
+ beq ulp1_mode
+@@ -918,6 +944,9 @@ ulp1_mode:
+ b ulp_exit
+
+ ulp_exit:
++ /* Disable low power mode for 2.5V regulator. */
++ at91_2_5V_reg_set_low_power 0
++
+ ldr pmc, .pmc_base
+
+ at91_plla_enable
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/211-ARM-at91-pm-wait-for-ddr-power-mode-off.patch b/target/linux/at91/patches-5.10/211-ARM-at91-pm-wait-for-ddr-power-mode-off.patch
new file mode 100644
index 0000000000..f94b479240
--- /dev/null
+++ b/target/linux/at91/patches-5.10/211-ARM-at91-pm-wait-for-ddr-power-mode-off.patch
@@ -0,0 +1,33 @@
+From 2b522a22243938dd7613e09c954172b1fa6217f5 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:50:01 +0300
+Subject: [PATCH 211/247] ARM: at91: pm: wait for ddr power mode off
+
+Wait for DDR power mode off before shutting down the core.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-16-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm_suspend.S | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
+index 9c9e08fd8300..7396e18dd7e5 100644
+--- a/arch/arm/mach-at91/pm_suspend.S
++++ b/arch/arm/mach-at91/pm_suspend.S
+@@ -980,6 +980,11 @@ ulp_exit:
+ mov tmp1, #0x1
+ str tmp1, [r0, #0x10]
+
++ /* Wait for it. */
++1: ldr tmp1, [r0, #0x10]
++ tst tmp1, #0x1
++ beq 1b
++
+ /* Shutdown */
+ ldr r0, .shdwc
+ mov tmp1, #0xA5000000
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/212-ARM-at91-pm-add-sama7g5-ddr-controller.patch b/target/linux/at91/patches-5.10/212-ARM-at91-pm-add-sama7g5-ddr-controller.patch
new file mode 100644
index 0000000000..e85e55ccc6
--- /dev/null
+++ b/target/linux/at91/patches-5.10/212-ARM-at91-pm-add-sama7g5-ddr-controller.patch
@@ -0,0 +1,45 @@
+From 3f55310c00b8c478da1458704027036c1a414973 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:50:03 +0300
+Subject: [PATCH 212/247] ARM: at91: pm: add sama7g5 ddr controller
+
+Add SAMA7G5 DDR controller to the list of DDR controller compatibles.
+At the moment there is no standby support. Adapt the code for this.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-18-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.c | 9 ++++++---
+ 1 file changed, 6 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index 96f2be0a53cb..622d68724c3f 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -548,6 +548,7 @@ static const struct of_device_id ramc_ids[] __initconst = {
+ { .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
+ { .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
+ { .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
++ { .compatible = "microchip,sama7g5-uddrc", },
+ { /*sentinel*/ }
+ };
+
+@@ -569,9 +570,11 @@ static __init int at91_dt_ramc(void)
+ }
+
+ ramc = of_id->data;
+- if (!standby)
+- standby = ramc->idle;
+- soc_pm.data.memctrl = ramc->memctrl;
++ if (ramc) {
++ if (!standby)
++ standby = ramc->idle;
++ soc_pm.data.memctrl = ramc->memctrl;
++ }
+
+ idx++;
+ }
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/213-ARM-at91-pm-add-sama7g5-ddr-phy-controller.patch b/target/linux/at91/patches-5.10/213-ARM-at91-pm-add-sama7g5-ddr-phy-controller.patch
new file mode 100644
index 0000000000..c01c952620
--- /dev/null
+++ b/target/linux/at91/patches-5.10/213-ARM-at91-pm-add-sama7g5-ddr-phy-controller.patch
@@ -0,0 +1,99 @@
+From bbbbf16c44f34a2d563fa7d71de64ffe3b4b82dc Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:50:04 +0300
+Subject: [PATCH 213/247] ARM: at91: pm: add sama7g5 ddr phy controller
+
+SAMA7G5 self-refresh procedure accesses also the DDR PHY registers.
+Adapt the code so that the at91_dt_ramc() to look also for DDR PHYs,
+in case it is mandatory.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-19-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.c | 27 +++++++++++++++++++++------
+ 1 file changed, 21 insertions(+), 6 deletions(-)
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index 622d68724c3f..b047a1f2ddfb 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -552,7 +552,12 @@ static const struct of_device_id ramc_ids[] __initconst = {
+ { /*sentinel*/ }
+ };
+
+-static __init int at91_dt_ramc(void)
++static const struct of_device_id ramc_phy_ids[] __initconst = {
++ { .compatible = "microchip,sama7g5-ddr3phy", },
++ { /* Sentinel. */ },
++};
++
++static __init void at91_dt_ramc(bool phy_mandatory)
+ {
+ struct device_node *np;
+ const struct of_device_id *of_id;
+@@ -585,6 +590,16 @@ static __init int at91_dt_ramc(void)
+ goto unmap_ramc;
+ }
+
++ /* Lookup for DDR PHY node, if any. */
++ for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) {
++ soc_pm.data.ramc_phy = of_iomap(np, 0);
++ if (!soc_pm.data.ramc_phy)
++ panic(pr_fmt("unable to map ramc phy cpu registers\n"));
++ }
++
++ if (phy_mandatory && !soc_pm.data.ramc_phy)
++ panic(pr_fmt("DDR PHY is mandatory!\n"));
++
+ if (!standby) {
+ pr_warn("ramc no standby function available\n");
+ return 0;
+@@ -953,7 +968,7 @@ void __init at91rm9200_pm_init(void)
+ soc_pm.data.standby_mode = AT91_PM_STANDBY;
+ soc_pm.data.suspend_mode = AT91_PM_ULP0;
+
+- ret = at91_dt_ramc();
++ ret = at91_dt_ramc(false);
+ if (ret)
+ return;
+
+@@ -980,7 +995,7 @@ void __init sam9x60_pm_init(void)
+
+ at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+ at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
+- ret = at91_dt_ramc();
++ ret = at91_dt_ramc(false);
+ if (ret)
+ return;
+
+@@ -1005,7 +1020,7 @@ void __init at91sam9_pm_init(void)
+ soc_pm.data.standby_mode = AT91_PM_STANDBY;
+ soc_pm.data.suspend_mode = AT91_PM_ULP0;
+
+- ret = at91_dt_ramc();
++ ret = at91_dt_ramc(false);
+ if (ret)
+ return;
+
+@@ -1023,7 +1038,7 @@ void __init sama5_pm_init(void)
+ return;
+
+ at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+- ret = at91_dt_ramc();
++ ret = at91_dt_ramc(false);
+ if (ret)
+ return;
+
+@@ -1048,7 +1063,7 @@ void __init sama5d2_pm_init(void)
+
+ at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+ at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
+- ret = at91_dt_ramc();
++ ret = at91_dt_ramc(false);
+ if (ret)
+ return;
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/214-ARM-at91-pm-save-ddr-phy-calibration-data-to-securam.patch b/target/linux/at91/patches-5.10/214-ARM-at91-pm-save-ddr-phy-calibration-data-to-securam.patch
new file mode 100644
index 0000000000..f6306c8276
--- /dev/null
+++ b/target/linux/at91/patches-5.10/214-ARM-at91-pm-save-ddr-phy-calibration-data-to-securam.patch
@@ -0,0 +1,156 @@
+From b355bb98eae3e343969fc5a0203e0dab472a6acd Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:50:05 +0300
+Subject: [PATCH 214/247] ARM: at91: pm: save ddr phy calibration data to
+ securam
+
+The resuming from backup mode is done with the help of bootloader.
+The bootloader reconfigure the DDR controller and DDR PHY controller.
+To speed-up the resuming process save the PHY calibration data into
+SECURAM before suspending (securam is powered on backup mode).
+This data will be later used by bootloader in DDR PHY reconfiguration
+process. Also, in the process or recalibration the first 8 words of
+the memory may get corrupted. To solve this, these 8 words are saved
+in the securam and restored by bootloader in the process of PHY
+configuration.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-20-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.c | 60 ++++++++++++++++++++++++++++++++++++++++-
+ 1 file changed, 59 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index b047a1f2ddfb..fd3beaeec17d 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -10,6 +10,7 @@
+ #include <linux/io.h>
+ #include <linux/of_address.h>
+ #include <linux/of.h>
++#include <linux/of_fdt.h>
+ #include <linux/of_platform.h>
+ #include <linux/parser.h>
+ #include <linux/suspend.h>
+@@ -27,18 +28,23 @@
+ #include "generic.h"
+ #include "pm.h"
+
++#define BACKUP_DDR_PHY_CALIBRATION (9)
++
+ /**
+ * struct at91_pm_bu - AT91 power management backup unit data structure
+ * @suspended: true if suspended to backup mode
+ * @reserved: reserved
+ * @canary: canary data for memory checking after exit from backup mode
+ * @resume: resume API
++ * @ddr_phy_calibration: DDR PHY calibration data: ZQ0CR0, first 8 words
++ * of the memory
+ */
+ struct at91_pm_bu {
+ int suspended;
+ unsigned long reserved;
+ phys_addr_t canary;
+ phys_addr_t resume;
++ unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION];
+ };
+
+ /**
+@@ -48,6 +54,7 @@ struct at91_pm_bu {
+ * @ws_ids: wakup sources of_device_id array
+ * @data: PM data to be used on last phase of suspend
+ * @bu: backup unit mapped data (for backup mode)
++ * @memcs: memory chip select
+ */
+ struct at91_soc_pm {
+ int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
+@@ -55,6 +62,7 @@ struct at91_soc_pm {
+ const struct of_device_id *ws_ids;
+ struct at91_pm_bu *bu;
+ struct at91_pm_data data;
++ void *memcs;
+ };
+
+ /**
+@@ -316,6 +324,19 @@ extern u32 at91_pm_suspend_in_sram_sz;
+
+ static int at91_suspend_finish(unsigned long val)
+ {
++ int i;
++
++ if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) {
++ /*
++ * The 1st 8 words of memory might get corrupted in the process
++ * of DDR PHY recalibration; it is saved here in securam and it
++ * will be restored later, after recalibration, by bootloader
++ */
++ for (i = 1; i < BACKUP_DDR_PHY_CALIBRATION; i++)
++ soc_pm.bu->ddr_phy_calibration[i] =
++ *((unsigned int *)soc_pm.memcs + (i - 1));
++ }
++
+ flush_cache_all();
+ outer_disable();
+
+@@ -688,12 +709,40 @@ static bool __init at91_is_pm_mode_active(int pm_mode)
+ soc_pm.data.suspend_mode == pm_mode);
+ }
+
++static int __init at91_pm_backup_scan_memcs(unsigned long node,
++ const char *uname, int depth,
++ void *data)
++{
++ const char *type;
++ const __be32 *reg;
++ int *located = data;
++ int size;
++
++ /* Memory node already located. */
++ if (*located)
++ return 0;
++
++ type = of_get_flat_dt_prop(node, "device_type", NULL);
++
++ /* We are scanning "memory" nodes only. */
++ if (!type || strcmp(type, "memory"))
++ return 0;
++
++ reg = of_get_flat_dt_prop(node, "reg", &size);
++ if (reg) {
++ soc_pm.memcs = __va((phys_addr_t)be32_to_cpu(*reg));
++ *located = 1;
++ }
++
++ return 0;
++}
++
+ static int __init at91_pm_backup_init(void)
+ {
+ struct gen_pool *sram_pool;
+ struct device_node *np;
+ struct platform_device *pdev;
+- int ret = -ENODEV;
++ int ret = -ENODEV, located = 0;
+
+ if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
+ return -EPERM;
+@@ -728,6 +777,15 @@ static int __init at91_pm_backup_init(void)
+ soc_pm.bu->suspended = 0;
+ soc_pm.bu->canary = __pa_symbol(&canary);
+ soc_pm.bu->resume = __pa_symbol(cpu_resume);
++ if (soc_pm.data.ramc_phy) {
++ of_scan_flat_dt(at91_pm_backup_scan_memcs, &located);
++ if (!located)
++ goto securam_fail;
++
++ /* DDR3PHY_ZQ0SR0 */
++ soc_pm.bu->ddr_phy_calibration[0] = readl(soc_pm.data.ramc_phy +
++ 0x188);
++ }
+
+ return 0;
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/215-ARM-at91-pm-add-backup-mode-support-for-SAMA7G5.patch b/target/linux/at91/patches-5.10/215-ARM-at91-pm-add-backup-mode-support-for-SAMA7G5.patch
new file mode 100644
index 0000000000..41c796b693
--- /dev/null
+++ b/target/linux/at91/patches-5.10/215-ARM-at91-pm-add-backup-mode-support-for-SAMA7G5.patch
@@ -0,0 +1,59 @@
+From 62be32b56ff31b2cd048a53fac40a165c5bc66cd Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:50:06 +0300
+Subject: [PATCH 215/247] ARM: at91: pm: add backup mode support for SAMA7G5
+
+Adapt at91_pm_backup_init() to work for SAMA7G5. Also, set the LPM pin
+to shutdown controller. This will signal to PMIC that it needs to switch
+to the state corresponding to backup mode.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-21-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.c | 3 ++-
+ arch/arm/mach-at91/pm_suspend.S | 7 +++++++
+ 2 files changed, 9 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index fd3beaeec17d..653350eec9b6 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -744,7 +744,8 @@ static int __init at91_pm_backup_init(void)
+ struct platform_device *pdev;
+ int ret = -ENODEV, located = 0;
+
+- if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
++ if (!IS_ENABLED(CONFIG_SOC_SAMA5D2) &&
++ !IS_ENABLED(CONFIG_SOC_SAMA7G5))
+ return -EPERM;
+
+ if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
+diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
+index 7396e18dd7e5..cbd61a3bcab1 100644
+--- a/arch/arm/mach-at91/pm_suspend.S
++++ b/arch/arm/mach-at91/pm_suspend.S
+@@ -106,6 +106,12 @@ lp_done_\ena:
+ #endif
+ .endm
+
++ .macro at91_backup_set_lpm reg
++#ifdef CONFIG_SOC_SAMA7
++ orr \reg, \reg, #0x200000
++#endif
++ .endm
++
+ .text
+
+ .arm
+@@ -989,6 +995,7 @@ ulp_exit:
+ ldr r0, .shdwc
+ mov tmp1, #0xA5000000
+ add tmp1, tmp1, #0x1
++ at91_backup_set_lpm tmp1
+ str tmp1, [r0, #0]
+ .endm
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/216-ARM-at91-pm-add-sama7g5-s-pmc.patch b/target/linux/at91/patches-5.10/216-ARM-at91-pm-add-sama7g5-s-pmc.patch
new file mode 100644
index 0000000000..f52478aaf7
--- /dev/null
+++ b/target/linux/at91/patches-5.10/216-ARM-at91-pm-add-sama7g5-s-pmc.patch
@@ -0,0 +1,41 @@
+From e9855ac00e8d9a2c41cea42b4f38a2b0b010bef3 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:50:07 +0300
+Subject: [PATCH 216/247] ARM: at91: pm: add sama7g5's pmc
+
+Add SAMA7G5's PMC to compatible list.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-22-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index 653350eec9b6..687ce8582b4f 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -912,6 +912,11 @@ static const struct pmc_info pmc_infos[] __initconst = {
+ .mckr = 0x28,
+ .version = AT91_PMC_V2,
+ },
++ {
++ .mckr = 0x28,
++ .version = AT91_PMC_V2,
++ },
++
+ };
+
+ static const struct of_device_id atmel_pmc_ids[] __initconst = {
+@@ -927,6 +932,7 @@ static const struct of_device_id atmel_pmc_ids[] __initconst = {
+ { .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
+ { .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
+ { .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
++ { .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] },
+ { /* sentinel */ },
+ };
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/217-ARM-at91-sama7-introduce-sama7-SoC-family.patch b/target/linux/at91/patches-5.10/217-ARM-at91-sama7-introduce-sama7-SoC-family.patch
new file mode 100644
index 0000000000..de38988237
--- /dev/null
+++ b/target/linux/at91/patches-5.10/217-ARM-at91-sama7-introduce-sama7-SoC-family.patch
@@ -0,0 +1,71 @@
+From dea645bce478cc72a2bf2413ec873927d1471442 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Thu, 15 Apr 2021 13:50:08 +0300
+Subject: [PATCH 217/247] ARM: at91: sama7: introduce sama7 SoC family
+
+Introduce new family of SoCs, sama7, and first SoC, sama7g5.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+[claudiu.beznea@microchip.com: keep only the sama7_dt]
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-23-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/Makefile | 1 +
+ arch/arm/mach-at91/sama7.c | 32 ++++++++++++++++++++++++++++++++
+ 2 files changed, 33 insertions(+)
+ create mode 100644 arch/arm/mach-at91/sama7.c
+
+diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
+index f565490f1b70..522b680b6446 100644
+--- a/arch/arm/mach-at91/Makefile
++++ b/arch/arm/mach-at91/Makefile
+@@ -8,6 +8,7 @@ obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
+ obj-$(CONFIG_SOC_AT91SAM9) += at91sam9.o
+ obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
+ obj-$(CONFIG_SOC_SAMA5) += sama5.o
++obj-$(CONFIG_SOC_SAMA7) += sama7.o
+ obj-$(CONFIG_SOC_SAMV7) += samv7.o
+
+ # Power Management
+diff --git a/arch/arm/mach-at91/sama7.c b/arch/arm/mach-at91/sama7.c
+new file mode 100644
+index 000000000000..19d7bcbc97f1
+--- /dev/null
++++ b/arch/arm/mach-at91/sama7.c
+@@ -0,0 +1,32 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++/*
++ * Setup code for SAMA7
++ *
++ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
++ *
++ */
++
++#include <linux/of.h>
++#include <linux/of_platform.h>
++
++#include <asm/mach/arch.h>
++#include <asm/system_misc.h>
++
++#include "generic.h"
++
++static void __init sama7_dt_device_init(void)
++{
++ of_platform_default_populate(NULL, NULL, NULL);
++}
++
++static const char *const sama7_dt_board_compat[] __initconst = {
++ "microchip,sama7",
++ NULL
++};
++
++DT_MACHINE_START(sama7_dt, "Microchip SAMA7")
++ /* Maintainer: Microchip */
++ .init_machine = sama7_dt_device_init,
++ .dt_compat = sama7_dt_board_compat,
++MACHINE_END
++
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/218-ARM-at91-pm-add-pm-support-for-SAMA7G5.patch b/target/linux/at91/patches-5.10/218-ARM-at91-pm-add-pm-support-for-SAMA7G5.patch
new file mode 100644
index 0000000000..c6dc471346
--- /dev/null
+++ b/target/linux/at91/patches-5.10/218-ARM-at91-pm-add-pm-support-for-SAMA7G5.patch
@@ -0,0 +1,105 @@
+From aba3984dc7a405d20b83bff603d23719d0e26bc7 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:50:09 +0300
+Subject: [PATCH 218/247] ARM: at91: pm: add pm support for SAMA7G5
+
+Add support for SAMA7G5 power management modes: standby, ulp0, ulp1, backup.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-24-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/generic.h | 2 ++
+ arch/arm/mach-at91/pm.c | 37 ++++++++++++++++++++++++++++++++++++
+ arch/arm/mach-at91/sama7.c | 1 +
+ 3 files changed, 40 insertions(+)
+
+diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
+index 0a4cdcb4985b..0c3960a8b3eb 100644
+--- a/arch/arm/mach-at91/generic.h
++++ b/arch/arm/mach-at91/generic.h
+@@ -14,12 +14,14 @@ extern void __init at91sam9_pm_init(void);
+ extern void __init sam9x60_pm_init(void);
+ extern void __init sama5_pm_init(void);
+ extern void __init sama5d2_pm_init(void);
++extern void __init sama7_pm_init(void);
+ #else
+ static inline void __init at91rm9200_pm_init(void) { }
+ static inline void __init at91sam9_pm_init(void) { }
+ static inline void __init sam9x60_pm_init(void) { }
+ static inline void __init sama5_pm_init(void) { }
+ static inline void __init sama5d2_pm_init(void) { }
++static inline void __init sama7_pm_init(void) { }
+ #endif
+
+ #endif /* _AT91_GENERIC_H */
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index 687ce8582b4f..9c8c998cf9f4 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -152,6 +152,17 @@ static const struct of_device_id sam9x60_ws_ids[] = {
+ { /* sentinel */ }
+ };
+
++static const struct of_device_id sama7g5_ws_ids[] = {
++ { .compatible = "atmel,at91sam9x5-rtc", .data = &ws_info[1] },
++ { .compatible = "microchip,sama7g5-ohci", .data = &ws_info[2] },
++ { .compatible = "usb-ohci", .data = &ws_info[2] },
++ { .compatible = "atmel,at91sam9g45-ehci", .data = &ws_info[2] },
++ { .compatible = "usb-ehci", .data = &ws_info[2] },
++ { .compatible = "microchip,sama7g5-sdhci", .data = &ws_info[3] },
++ { .compatible = "atmel,at91sam9260-rtt", .data = &ws_info[4] },
++ { /* sentinel */ }
++};
++
+ static int at91_pm_config_ws(unsigned int pm_mode, bool set)
+ {
+ const struct wakeup_source_info *wsi;
+@@ -1139,6 +1150,32 @@ void __init sama5d2_pm_init(void)
+ soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
+ }
+
++void __init sama7_pm_init(void)
++{
++ static const int modes[] __initconst = {
++ AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP1, AT91_PM_BACKUP,
++ };
++ static const u32 iomaps[] __initconst = {
++ [AT91_PM_ULP0] = AT91_PM_IOMAP(SFRBU),
++ [AT91_PM_ULP1] = AT91_PM_IOMAP(SFRBU) |
++ AT91_PM_IOMAP(SHDWC),
++ [AT91_PM_BACKUP] = AT91_PM_IOMAP(SFRBU) |
++ AT91_PM_IOMAP(SHDWC),
++ };
++
++ if (!IS_ENABLED(CONFIG_SOC_SAMA7))
++ return;
++
++ at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
++
++ at91_dt_ramc(true);
++ at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
++ at91_pm_init(NULL);
++
++ soc_pm.ws_ids = sama7g5_ws_ids;
++ soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
++}
++
+ static int __init at91_pm_modes_select(char *str)
+ {
+ char *s;
+diff --git a/arch/arm/mach-at91/sama7.c b/arch/arm/mach-at91/sama7.c
+index 19d7bcbc97f1..bd43733ede18 100644
+--- a/arch/arm/mach-at91/sama7.c
++++ b/arch/arm/mach-at91/sama7.c
+@@ -17,6 +17,7 @@
+ static void __init sama7_dt_device_init(void)
+ {
+ of_platform_default_populate(NULL, NULL, NULL);
++ sama7_pm_init();
+ }
+
+ static const char *const sama7_dt_board_compat[] __initconst = {
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/219-ARM-at91-pm-add-sama7g5-shdwc.patch b/target/linux/at91/patches-5.10/219-ARM-at91-pm-add-sama7g5-shdwc.patch
new file mode 100644
index 0000000000..ac62f053e6
--- /dev/null
+++ b/target/linux/at91/patches-5.10/219-ARM-at91-pm-add-sama7g5-shdwc.patch
@@ -0,0 +1,29 @@
+From 84ff37cc98e6aaefe27d6edd5e3ced2be99d9833 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 15 Apr 2021 13:50:10 +0300
+Subject: [PATCH 219/247] ARM: at91: pm: add sama7g5 shdwc
+
+Add SAMA7G5 SHDWC.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210415105010.569620-25-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index 9c8c998cf9f4..a07e14d89ba4 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -809,6 +809,7 @@ static int __init at91_pm_backup_init(void)
+ static const struct of_device_id atmel_shdwc_ids[] = {
+ { .compatible = "atmel,sama5d2-shdwc" },
+ { .compatible = "microchip,sam9x60-shdwc" },
++ { .compatible = "microchip,sama7g5-shdwc" },
+ { /* sentinel. */ }
+ };
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/220-ARM-configs-at91-add-defconfig-for-sama7-family-of-S.patch b/target/linux/at91/patches-5.10/220-ARM-configs-at91-add-defconfig-for-sama7-family-of-S.patch
new file mode 100644
index 0000000000..80a8d08d01
--- /dev/null
+++ b/target/linux/at91/patches-5.10/220-ARM-configs-at91-add-defconfig-for-sama7-family-of-S.patch
@@ -0,0 +1,239 @@
+From 2223a85aed2d892bd7c13053f27e777c743e5332 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Mon, 28 Jun 2021 15:04:51 +0300
+Subject: [PATCH 220/247] ARM: configs: at91: add defconfig for sama7 family of
+ SoCs
+
+Add defconfig for sama7 SoC family.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+[claudiu.beznea@microchip.com: add clocks, ethernet, timers, power]
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+[codrin.ciubotariu@microchip.com: add audio]
+Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+[nicolas.ferre@microchip.com: atags not set, mtd tests, spi gpio]
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210628120452.74408-3-eugen.hristev@microchip.com
+---
+ arch/arm/configs/sama7_defconfig | 209 +++++++++++++++++++++++++++++++
+ 1 file changed, 209 insertions(+)
+ create mode 100644 arch/arm/configs/sama7_defconfig
+
+diff --git a/arch/arm/configs/sama7_defconfig b/arch/arm/configs/sama7_defconfig
+new file mode 100644
+index 000000000000..938aae4bd80b
+--- /dev/null
++++ b/arch/arm/configs/sama7_defconfig
+@@ -0,0 +1,209 @@
++# CONFIG_LOCALVERSION_AUTO is not set
++# CONFIG_SWAP is not set
++CONFIG_SYSVIPC=y
++CONFIG_NO_HZ_IDLE=y
++CONFIG_HIGH_RES_TIMERS=y
++CONFIG_LOG_BUF_SHIFT=16
++CONFIG_CGROUPS=y
++CONFIG_CGROUP_DEBUG=y
++CONFIG_NAMESPACES=y
++CONFIG_SYSFS_DEPRECATED=y
++CONFIG_SYSFS_DEPRECATED_V2=y
++CONFIG_BLK_DEV_INITRD=y
++# CONFIG_FHANDLE is not set
++# CONFIG_IO_URING is not set
++CONFIG_KALLSYMS_ALL=y
++CONFIG_EMBEDDED=y
++# CONFIG_VM_EVENT_COUNTERS is not set
++CONFIG_SLAB=y
++CONFIG_ARCH_AT91=y
++CONFIG_SOC_SAMA7G5=y
++CONFIG_ATMEL_CLOCKSOURCE_TCB=y
++# CONFIG_CACHE_L2X0 is not set
++# CONFIG_ARM_PATCH_IDIV is not set
++# CONFIG_CPU_SW_DOMAIN_PAN is not set
++CONFIG_FORCE_MAX_ZONEORDER=15
++CONFIG_UACCESS_WITH_MEMCPY=y
++# CONFIG_ATAGS is not set
++CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk ignore_loglevel"
++CONFIG_VFP=y
++CONFIG_NEON=y
++CONFIG_KERNEL_MODE_NEON=y
++CONFIG_MODULES=y
++CONFIG_MODULE_FORCE_LOAD=y
++CONFIG_MODULE_UNLOAD=y
++CONFIG_MODULE_FORCE_UNLOAD=y
++# CONFIG_BLK_DEV_BSG is not set
++CONFIG_PARTITION_ADVANCED=y
++# CONFIG_EFI_PARTITION is not set
++# CONFIG_COREDUMP is not set
++# CONFIG_COMPACTION is not set
++CONFIG_CMA=y
++CONFIG_NET=y
++CONFIG_PACKET=y
++CONFIG_UNIX=y
++CONFIG_INET=y
++CONFIG_IP_MULTICAST=y
++CONFIG_IP_PNP=y
++CONFIG_IP_PNP_DHCP=y
++# CONFIG_INET_DIAG is not set
++CONFIG_IPV6_SIT_6RD=y
++CONFIG_BRIDGE=m
++CONFIG_BRIDGE_VLAN_FILTERING=y
++CONFIG_NET_DSA=m
++CONFIG_VLAN_8021Q=m
++CONFIG_CAN=y
++CONFIG_CAN_M_CAN=y
++CONFIG_CAN_M_CAN_PLATFORM=y
++CONFIG_BT=y
++CONFIG_BT_RFCOMM=y
++CONFIG_BT_RFCOMM_TTY=y
++CONFIG_BT_BNEP=y
++CONFIG_BT_BNEP_MC_FILTER=y
++CONFIG_BT_BNEP_PROTO_FILTER=y
++CONFIG_BT_HIDP=y
++CONFIG_BT_HCIBTUSB=y
++CONFIG_BT_HCIUART=y
++CONFIG_BT_HCIUART_H4=y
++CONFIG_BT_HCIVHCI=y
++CONFIG_CFG80211=m
++# CONFIG_CFG80211_DEFAULT_PS is not set
++CONFIG_CFG80211_DEBUGFS=y
++CONFIG_CFG80211_WEXT=y
++CONFIG_MAC80211=m
++CONFIG_MAC80211_LEDS=y
++CONFIG_RFKILL=y
++CONFIG_RFKILL_INPUT=y
++CONFIG_PCCARD=y
++CONFIG_DEVTMPFS=y
++CONFIG_DEVTMPFS_MOUNT=y
++# CONFIG_STANDALONE is not set
++# CONFIG_PREVENT_FIRMWARE_BUILD is not set
++# CONFIG_ALLOW_DEV_COREDUMP is not set
++CONFIG_MTD=y
++CONFIG_MTD_TESTS=m
++CONFIG_MTD_CMDLINE_PARTS=y
++CONFIG_BLK_DEV_LOOP=y
++CONFIG_BLK_DEV_RAM=y
++CONFIG_BLK_DEV_RAM_COUNT=1
++CONFIG_BLK_DEV_RAM_SIZE=8192
++CONFIG_EEPROM_AT24=y
++CONFIG_SCSI=y
++CONFIG_BLK_DEV_SD=y
++CONFIG_NETDEVICES=y
++CONFIG_MACB=y
++CONFIG_MICREL_PHY=y
++CONFIG_INPUT_EVDEV=y
++CONFIG_KEYBOARD_GPIO=y
++# CONFIG_INPUT_MOUSE is not set
++CONFIG_LEGACY_PTY_COUNT=4
++CONFIG_SERIAL_ATMEL=y
++CONFIG_SERIAL_ATMEL_CONSOLE=y
++CONFIG_HW_RANDOM=y
++CONFIG_I2C=y
++CONFIG_I2C_CHARDEV=y
++CONFIG_I2C_AT91=y
++CONFIG_SPI=y
++CONFIG_SPI_MEM=y
++CONFIG_SPI_ATMEL=y
++CONFIG_SPI_GPIO=y
++CONFIG_PINCTRL_AT91=y
++CONFIG_PINCTRL_AT91PIO4=y
++CONFIG_GPIO_SYSFS=y
++CONFIG_POWER_RESET=y
++CONFIG_POWER_RESET_AT91_RESET=y
++CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
++# CONFIG_HWMON is not set
++CONFIG_WATCHDOG=y
++CONFIG_SAMA5D4_WATCHDOG=y
++CONFIG_MFD_ATMEL_FLEXCOM=y
++CONFIG_REGULATOR=y
++CONFIG_REGULATOR_FIXED_VOLTAGE=y
++CONFIG_REGULATOR_MCP16502=y
++CONFIG_MEDIA_SUPPORT=y
++CONFIG_MEDIA_SUPPORT_FILTER=y
++# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
++CONFIG_MEDIA_CAMERA_SUPPORT=y
++CONFIG_MEDIA_PLATFORM_SUPPORT=y
++CONFIG_V4L_PLATFORM_DRIVERS=y
++CONFIG_VIDEO_IMX219=m
++CONFIG_VIDEO_IMX274=m
++CONFIG_VIDEO_OV5647=m
++CONFIG_SOUND=y
++CONFIG_SND=y
++CONFIG_SND_SOC=y
++CONFIG_SND_ATMEL_SOC=y
++CONFIG_SND_SOC_MIKROE_PROTO=m
++CONFIG_SND_MCHP_SOC_I2S_MCC=y
++CONFIG_SND_MCHP_SOC_SPDIFTX=y
++CONFIG_SND_MCHP_SOC_SPDIFRX=y
++CONFIG_SND_SOC_PCM5102A=y
++CONFIG_SND_SOC_SPDIF=y
++CONFIG_SND_SIMPLE_CARD=y
++CONFIG_USB=y
++CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
++CONFIG_USB_DYNAMIC_MINORS=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_STORAGE=y
++CONFIG_USB_UAS=y
++CONFIG_USB_GADGET=y
++CONFIG_U_SERIAL_CONSOLE=y
++CONFIG_USB_ATMEL_USBA=m
++CONFIG_USB_CONFIGFS=y
++CONFIG_USB_CONFIGFS_ACM=y
++CONFIG_USB_CONFIGFS_MASS_STORAGE=y
++CONFIG_USB_CONFIGFS_F_UVC=y
++CONFIG_USB_G_SERIAL=m
++CONFIG_MMC=y
++CONFIG_MMC_SDHCI=y
++CONFIG_MMC_SDHCI_PLTFM=y
++CONFIG_MMC_SDHCI_OF_AT91=y
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
++CONFIG_LEDS_GPIO=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++CONFIG_RTC_CLASS=y
++# CONFIG_RTC_NVMEM is not set
++CONFIG_RTC_DRV_AT91RM9200=y
++CONFIG_RTC_DRV_AT91SAM9=y
++CONFIG_DMADEVICES=y
++CONFIG_AT_XDMAC=y
++CONFIG_DMATEST=y
++CONFIG_STAGING=y
++CONFIG_MICROCHIP_PIT64B=y
++# CONFIG_IOMMU_SUPPORT is not set
++# CONFIG_ATMEL_EBI is not set
++CONFIG_IIO=y
++CONFIG_IIO_SW_TRIGGER=y
++CONFIG_AT91_SAMA5D2_ADC=y
++CONFIG_PWM=y
++CONFIG_PWM_ATMEL=y
++CONFIG_EXT2_FS=y
++CONFIG_EXT3_FS=y
++CONFIG_FANOTIFY=y
++CONFIG_VFAT_FS=y
++CONFIG_TMPFS=y
++CONFIG_NFS_FS=y
++CONFIG_ROOT_NFS=y
++CONFIG_NLS_CODEPAGE_437=y
++CONFIG_NLS_CODEPAGE_850=y
++CONFIG_NLS_ISO8859_1=y
++CONFIG_NLS_UTF8=y
++CONFIG_LSM="N"
++CONFIG_CRYPTO_DEFLATE=y
++CONFIG_CRYPTO_LZO=y
++# CONFIG_CRYPTO_HW is not set
++CONFIG_CRC_CCITT=y
++CONFIG_CRC_ITU_T=y
++CONFIG_DMA_CMA=y
++CONFIG_CMA_SIZE_MBYTES=32
++CONFIG_CMA_ALIGNMENT=9
++# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
++CONFIG_DEBUG_FS=y
++# CONFIG_DEBUG_MISC is not set
++# CONFIG_SCHED_DEBUG is not set
++CONFIG_STACKTRACE=y
++# CONFIG_FTRACE is not set
++CONFIG_DEBUG_USER=y
++# CONFIG_RUNTIME_TESTING_MENU is not set
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/221-ARM-multi_v7_defconfig-add-sama7g5-SoC.patch b/target/linux/at91/patches-5.10/221-ARM-multi_v7_defconfig-add-sama7g5-SoC.patch
new file mode 100644
index 0000000000..5d8ab047fd
--- /dev/null
+++ b/target/linux/at91/patches-5.10/221-ARM-multi_v7_defconfig-add-sama7g5-SoC.patch
@@ -0,0 +1,38 @@
+From a62536054548e85da84ed835dc87baa8e5e99b41 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Mon, 28 Jun 2021 15:04:52 +0300
+Subject: [PATCH 221/247] ARM: multi_v7_defconfig: add sama7g5 SoC
+
+Add the Microchip SAMA7G5 ARM v7 Cortex-A7 based SoC to multi_v7_defconfig.
+Also add it's clock timer, the PIT64B.
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210628120452.74408-4-eugen.hristev@microchip.com
+---
+ arch/arm/configs/multi_v7_defconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
+index a611b0c1e540..4974f9bf163f 100644
+--- a/arch/arm/configs/multi_v7_defconfig
++++ b/arch/arm/configs/multi_v7_defconfig
+@@ -15,6 +15,7 @@ CONFIG_ARCH_AT91=y
+ CONFIG_SOC_SAMA5D2=y
+ CONFIG_SOC_SAMA5D3=y
+ CONFIG_SOC_SAMA5D4=y
++CONFIG_SOC_SAMA7G5=y
+ CONFIG_ARCH_BCM=y
+ CONFIG_ARCH_BCM_CYGNUS=y
+ CONFIG_ARCH_BCM_HR2=y
+@@ -967,6 +968,7 @@ CONFIG_APQ_MMCC_8084=y
+ CONFIG_MSM_GCC_8660=y
+ CONFIG_MSM_MMCC_8960=y
+ CONFIG_MSM_MMCC_8974=y
++CONFIG_MICROCHIP_PIT64B=y
+ CONFIG_BCM2835_MBOX=y
+ CONFIG_ROCKCHIP_IOMMU=y
+ CONFIG_TEGRA_IOMMU_GART=y
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/222-ARM-dts-at91-add-sama7g5-SoC-DT-and-sama7g5-ek.patch b/target/linux/at91/patches-5.10/222-ARM-dts-at91-add-sama7g5-SoC-DT-and-sama7g5-ek.patch
new file mode 100644
index 0000000000..ec2b25897f
--- /dev/null
+++ b/target/linux/at91/patches-5.10/222-ARM-dts-at91-add-sama7g5-SoC-DT-and-sama7g5-ek.patch
@@ -0,0 +1,2168 @@
+From 969b39d51b7df0869cca9983b06cefb59dae72b0 Mon Sep 17 00:00:00 2001
+From: Eugen Hristev <eugen.hristev@microchip.com>
+Date: Mon, 28 Jun 2021 15:04:50 +0300
+Subject: [PATCH 222/247] ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek
+
+Add Device Tree for sama7g5 SoC and associated board sama7g5-ek
+
+Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
+[claudiu.beznea@microchip.com: add clocks, ethernet, timers, power]
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+[codrin.ciubotariu@microchip.com: add audio]
+Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
+[nicolas.ferre@microchip.com: removed eeproms, reorder i2s dma chans]
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210628120452.74408-2-eugen.hristev@microchip.com
+[claudiu.beznea: adapt to kernel v5.10]
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+---
+ arch/arm/boot/dts/Makefile | 2 +
+ arch/arm/boot/dts/at91-sama7g5ek.dts | 656 +++++++++++++++++++
+ arch/arm/boot/dts/sama7g5-pinfunc.h | 923 +++++++++++++++++++++++++++
+ arch/arm/boot/dts/sama7g5.dtsi | 528 +++++++++++++++
+ 4 files changed, 2109 insertions(+)
+ create mode 100644 arch/arm/boot/dts/at91-sama7g5ek.dts
+ create mode 100644 arch/arm/boot/dts/sama7g5-pinfunc.h
+ create mode 100644 arch/arm/boot/dts/sama7g5.dtsi
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index ce66ffd5a1bb..2345a2304bd0 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -78,6 +78,8 @@ dtb-$(CONFIG_ARCH_ATLAS6) += \
+ atlas6-evb.dtb
+ dtb-$(CONFIG_ARCH_ATLAS7) += \
+ atlas7-evb.dtb
++dtb-$(CONFIG_SOC_SAMA7G5) += \
++ at91-sama7g5ek.dtb
+ dtb-$(CONFIG_ARCH_AXXIA) += \
+ axm5516-amarillo.dtb
+ dtb-$(CONFIG_ARCH_BCM2835) += \
+diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
+new file mode 100644
+index 000000000000..4cbed98cc2f4
+--- /dev/null
++++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
+@@ -0,0 +1,656 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
++ *
++ * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
++ *
++ * Author: Eugen Hristev <eugen.hristev@microchip.com>
++ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
++ *
++ */
++/dts-v1/;
++#include "sama7g5-pinfunc.h"
++#include "sama7g5.dtsi"
++#include <dt-bindings/mfd/atmel-flexcom.h>
++#include <dt-bindings/input/input.h>
++
++/ {
++ model = "Microchip SAMA7G5-EK";
++ compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
++
++ chosen {
++ bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
++ stdout-path = "serial0:115200n8";
++ };
++
++ aliases {
++ serial0 = &uart3;
++ serial1 = &uart4;
++ serial2 = &uart7;
++ serial3 = &uart0;
++ i2c0 = &i2c1;
++ i2c1 = &i2c8;
++ i2c2 = &i2c9;
++ };
++
++ clocks {
++ slow_xtal {
++ clock-frequency = <32768>;
++ };
++
++ main_xtal {
++ clock-frequency = <24000000>;
++ };
++ };
++
++ gpio_keys {
++ compatible = "gpio-keys";
++
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_key_gpio_default>;
++
++ bp1 {
++ label = "PB_USER";
++ gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
++ linux,code = <KEY_PROG1>;
++ wakeup-source;
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_led_gpio_default>;
++ status = "okay"; /* Conflict with pwm. */
++
++ red_led {
++ label = "red";
++ gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
++ };
++
++ green_led {
++ label = "green";
++ gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
++ };
++
++ blue_led {
++ label = "blue";
++ gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "heartbeat";
++ };
++ };
++
++ /* 512 M */
++ memory@60000000 {
++ device_type = "memory";
++ reg = <0x60000000 0x20000000>;
++ };
++
++ sound: sound {
++ compatible = "simple-audio-card";
++ simple-audio-card,name = "sama7g5ek audio";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ simple-audio-card,dai-link@0 {
++ reg = <0>;
++ cpu {
++ sound-dai = <&spdiftx>;
++ };
++ codec {
++ sound-dai = <&spdif_out>;
++ };
++ };
++ simple-audio-card,dai-link@1 {
++ reg = <1>;
++ cpu {
++ sound-dai = <&spdifrx>;
++ };
++ codec {
++ sound-dai = <&spdif_in>;
++ };
++ };
++ };
++
++ spdif_in: spdif-in {
++ #sound-dai-cells = <0>;
++ compatible = "linux,spdif-dir";
++ };
++
++ spdif_out: spdif-out {
++ #sound-dai-cells = <0>;
++ compatible = "linux,spdif-dit";
++ };
++};
++
++&cpu0 {
++ cpu-supply = <&vddcpu>;
++};
++
++&dma0 {
++ status = "okay";
++};
++
++&dma1 {
++ status = "okay";
++};
++
++&dma2 {
++ status = "okay";
++};
++
++&flx0 {
++ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
++ status = "disabled";
++
++ uart0: serial@200 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_flx0_default>;
++ status = "disabled";
++ };
++};
++
++&flx1 {
++ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
++ status = "okay";
++
++ i2c1: i2c@600 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c1_default>;
++ i2c-analog-filter;
++ i2c-digital-filter;
++ i2c-digital-filter-width-ns = <35>;
++ status = "okay";
++
++ mcp16502@5b {
++ compatible = "microchip,mcp16502";
++ reg = <0x5b>;
++ status = "okay";
++
++ regulators {
++ vdd_3v3: VDD_IO {
++ regulator-name = "VDD_IO";
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <3700000>;
++ regulator-initial-mode = <2>;
++ regulator-allowed-modes = <2>, <4>;
++ regulator-always-on;
++
++ regulator-state-standby {
++ regulator-on-in-suspend;
++ regulator-mode = <4>;
++ };
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-mode = <4>;
++ };
++ };
++
++ vddioddr: VDD_DDR {
++ regulator-name = "VDD_DDR";
++ regulator-min-microvolt = <1300000>;
++ regulator-max-microvolt = <1450000>;
++ regulator-initial-mode = <2>;
++ regulator-allowed-modes = <2>, <4>;
++ regulator-always-on;
++
++ regulator-state-standby {
++ regulator-on-in-suspend;
++ regulator-mode = <4>;
++ };
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-mode = <4>;
++ };
++ };
++
++ vddcore: VDD_CORE {
++ regulator-name = "VDD_CORE";
++ regulator-min-microvolt = <1100000>;
++ regulator-max-microvolt = <1850000>;
++ regulator-initial-mode = <2>;
++ regulator-allowed-modes = <2>, <4>;
++ regulator-always-on;
++
++ regulator-state-standby {
++ regulator-on-in-suspend;
++ regulator-mode = <4>;
++ };
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-mode = <4>;
++ };
++ };
++
++ vddcpu: VDD_OTHER {
++ regulator-name = "VDD_OTHER";
++ regulator-min-microvolt = <1125000>;
++ regulator-max-microvolt = <1850000>;
++ regulator-initial-mode = <2>;
++ regulator-allowed-modes = <2>, <4>;
++ regulator-ramp-delay = <3125>;
++ regulator-always-on;
++
++ regulator-state-standby {
++ regulator-on-in-suspend;
++ regulator-mode = <4>;
++ };
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ regulator-mode = <4>;
++ };
++ };
++
++ vldo1: LDO1 {
++ regulator-name = "LDO1";
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <3700000>;
++ regulator-always-on;
++
++ regulator-state-standby {
++ regulator-on-in-suspend;
++ };
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vldo2: LDO2 {
++ regulator-name = "LDO2";
++ regulator-min-microvolt = <1200000>;
++ regulator-max-microvolt = <3700000>;
++
++ regulator-state-standby {
++ regulator-on-in-suspend;
++ };
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++ };
++ };
++ };
++};
++
++&flx3 {
++ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
++ status = "okay";
++
++ uart3: serial@200 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_flx3_default>;
++ status = "okay";
++ };
++};
++
++&flx4 {
++ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
++ status = "okay";
++
++ uart4: serial@200 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_flx4_default>;
++ status = "okay";
++ };
++};
++
++&flx7 {
++ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
++ status = "okay";
++
++ uart7: serial@200 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_flx7_default>;
++ status = "okay";
++ };
++};
++
++&flx8 {
++ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
++ status = "okay";
++
++ i2c8: i2c@600 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c8_default>;
++ i2c-analog-filter;
++ i2c-digital-filter;
++ i2c-digital-filter-width-ns = <35>;
++ status = "okay";
++ };
++};
++
++&flx9 {
++ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
++ status = "okay";
++
++ i2c9: i2c@600 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2c9_default>;
++ i2c-analog-filter;
++ i2c-digital-filter;
++ i2c-digital-filter-width-ns = <35>;
++ status = "okay";
++ };
++};
++
++&flx11 {
++ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
++ status = "okay";
++
++ spi11: spi@400 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
++ status = "okay";
++ };
++};
++
++&gmac0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>;
++ phy-mode = "rgmii-id";
++ status = "okay";
++
++ ethernet-phy@7 {
++ reg = <0x7>;
++ interrupt-parent = <&pioA>;
++ interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
++ };
++};
++
++&gmac1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>;
++ phy-mode = "rmii";
++ status = "okay";
++
++ ethernet-phy@0 {
++ reg = <0x0>;
++ interrupt-parent = <&pioA>;
++ interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
++ };
++};
++
++&i2s0 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_i2s0_default>;
++};
++
++&pioA {
++ pinctrl_flx0_default: flx0_default {
++ pinmux = <PIN_PE3__FLEXCOM0_IO0>,
++ <PIN_PE4__FLEXCOM0_IO1>,
++ <PIN_PE6__FLEXCOM0_IO3>,
++ <PIN_PE7__FLEXCOM0_IO4>;
++ bias-disable;
++ };
++
++ pinctrl_flx3_default: flx3_default {
++ pinmux = <PIN_PD16__FLEXCOM3_IO0>,
++ <PIN_PD17__FLEXCOM3_IO1>;
++ bias-disable;
++ };
++
++ pinctrl_flx4_default: flx4_default {
++ pinmux = <PIN_PD18__FLEXCOM4_IO0>,
++ <PIN_PD19__FLEXCOM4_IO1>;
++ bias-disable;
++ };
++
++ pinctrl_flx7_default: flx7_default {
++ pinmux = <PIN_PC23__FLEXCOM7_IO0>,
++ <PIN_PC24__FLEXCOM7_IO1>;
++ bias-disable;
++ };
++
++ pinctrl_gmac0_default: gmac0_default {
++ pinmux = <PIN_PA16__G0_TX0>,
++ <PIN_PA17__G0_TX1>,
++ <PIN_PA26__G0_TX2>,
++ <PIN_PA27__G0_TX3>,
++ <PIN_PA19__G0_RX0>,
++ <PIN_PA20__G0_RX1>,
++ <PIN_PA28__G0_RX2>,
++ <PIN_PA29__G0_RX3>,
++ <PIN_PA15__G0_TXEN>,
++ <PIN_PA30__G0_RXCK>,
++ <PIN_PA18__G0_RXDV>,
++ <PIN_PA22__G0_MDC>,
++ <PIN_PA23__G0_MDIO>,
++ <PIN_PA25__G0_125CK>;
++ bias-disable;
++ };
++
++ pinctrl_gmac0_txck_default: gmac0_txck_default {
++ pinmux = <PIN_PA24__G0_TXCK>;
++ bias-pull-up;
++ };
++
++ pinctrl_gmac0_phy_irq: gmac0_phy_irq {
++ pinmux = <PIN_PA31__GPIO>;
++ bias-disable;
++ };
++
++ pinctrl_gmac1_default: gmac1_default {
++ pinmux = <PIN_PD30__G1_TXCK>,
++ <PIN_PD22__G1_TX0>,
++ <PIN_PD23__G1_TX1>,
++ <PIN_PD21__G1_TXEN>,
++ <PIN_PD25__G1_RX0>,
++ <PIN_PD26__G1_RX1>,
++ <PIN_PD27__G1_RXER>,
++ <PIN_PD24__G1_RXDV>,
++ <PIN_PD28__G1_MDC>,
++ <PIN_PD29__G1_MDIO>;
++ bias-disable;
++ };
++
++ pinctrl_gmac1_phy_irq: gmac1_phy_irq {
++ pinmux = <PIN_PA21__GPIO>;
++ bias-disable;
++ };
++
++ pinctrl_i2c1_default: i2c1_default {
++ pinmux = <PIN_PC9__FLEXCOM1_IO0>,
++ <PIN_PC10__FLEXCOM1_IO1>;
++ bias-disable;
++ };
++
++ pinctrl_i2c8_default: i2c8_default {
++ pinmux = <PIN_PC14__FLEXCOM8_IO0>,
++ <PIN_PC13__FLEXCOM8_IO1>;
++ bias-disable;
++ };
++
++ pinctrl_i2c9_default: i2c9_default {
++ pinmux = <PIN_PC18__FLEXCOM9_IO0>,
++ <PIN_PC19__FLEXCOM9_IO1>;
++ bias-disable;
++ };
++
++ pinctrl_i2s0_default: i2s0_default {
++ pinmux = <PIN_PB23__I2SMCC0_CK>,
++ <PIN_PB24__I2SMCC0_WS>,
++ <PIN_PB25__I2SMCC0_DOUT1>,
++ <PIN_PB26__I2SMCC0_DOUT0>,
++ <PIN_PB27__I2SMCC0_MCK>;
++ bias-disable;
++ };
++
++ pinctrl_key_gpio_default: key_gpio_default {
++ pinmux = <PIN_PA12__GPIO>;
++ bias-pull-up;
++ };
++
++ pinctrl_led_gpio_default: led_gpio_default {
++ pinmux = <PIN_PA13__GPIO>,
++ <PIN_PB8__GPIO>,
++ <PIN_PD20__GPIO>;
++ bias-pull-up;
++ };
++
++ pinctrl_mikrobus1_an_default: mikrobus1_an_default {
++ pinmux = <PIN_PD0__GPIO>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus2_an_default: mikrobus2_an_default {
++ pinmux = <PIN_PD1__GPIO>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
++ pinmux = <PIN_PA13__PWMH2>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
++ pinmux = <PIN_PD20__PWMH3>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
++ pinmux = <PIN_PB6__FLEXCOM11_IO3>;
++ bias-disable;
++ };
++
++ pinctrl_mikrobus1_spi: mikrobus1_spi {
++ pinmux = <PIN_PB3__FLEXCOM11_IO0>,
++ <PIN_PB4__FLEXCOM11_IO1>,
++ <PIN_PB5__FLEXCOM11_IO2>;
++ bias-disable;
++ };
++
++ pinctrl_sdmmc0_default: sdmmc0_default {
++ cmd_data {
++ pinmux = <PIN_PA1__SDMMC0_CMD>,
++ <PIN_PA3__SDMMC0_DAT0>,
++ <PIN_PA4__SDMMC0_DAT1>,
++ <PIN_PA5__SDMMC0_DAT2>,
++ <PIN_PA6__SDMMC0_DAT3>,
++ <PIN_PA7__SDMMC0_DAT4>,
++ <PIN_PA8__SDMMC0_DAT5>,
++ <PIN_PA9__SDMMC0_DAT6>,
++ <PIN_PA10__SDMMC0_DAT7>;
++ bias-pull-up;
++ };
++
++ ck_cd_rstn_vddsel {
++ pinmux = <PIN_PA0__SDMMC0_CK>,
++ <PIN_PA2__SDMMC0_RSTN>,
++ <PIN_PA11__SDMMC0_DS>;
++ bias-pull-up;
++ };
++ };
++
++ pinctrl_sdmmc1_default: sdmmc1_default {
++ cmd_data {
++ pinmux = <PIN_PB29__SDMMC1_CMD>,
++ <PIN_PB31__SDMMC1_DAT0>,
++ <PIN_PC0__SDMMC1_DAT1>,
++ <PIN_PC1__SDMMC1_DAT2>,
++ <PIN_PC2__SDMMC1_DAT3>;
++ bias-pull-up;
++ };
++
++ ck_cd_rstn_vddsel {
++ pinmux = <PIN_PB30__SDMMC1_CK>,
++ <PIN_PB28__SDMMC1_RSTN>,
++ <PIN_PC5__SDMMC1_1V8SEL>,
++ <PIN_PC4__SDMMC1_CD>;
++ bias-pull-up;
++ };
++ };
++
++ pinctrl_sdmmc2_default: sdmmc2_default {
++ cmd_data {
++ pinmux = <PIN_PD3__SDMMC2_CMD>,
++ <PIN_PD5__SDMMC2_DAT0>,
++ <PIN_PD6__SDMMC2_DAT1>,
++ <PIN_PD7__SDMMC2_DAT2>,
++ <PIN_PD8__SDMMC2_DAT3>;
++ bias-pull-up;
++ };
++
++ ck {
++ pinmux = <PIN_PD4__SDMMC2_CK>;
++ bias-pull-up;
++ };
++ };
++
++ pinctrl_spdifrx_default: spdifrx_default {
++ pinmux = <PIN_PB0__SPDIF_RX>;
++ bias-disable;
++ };
++
++ pinctrl_spdiftx_default: spdiftx_default {
++ pinmux = <PIN_PB1__SPDIF_TX>;
++ bias-disable;
++ };
++};
++
++&pwm {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
++ status = "disabled"; /* Conflict with leds. */
++};
++
++&rtt {
++ atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
++};
++
++&sdmmc0 {
++ bus-width = <8>;
++ non-removable;
++ no-1-8-v;
++ sdhci-caps-mask = <0x0 0x00200000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_sdmmc0_default>;
++ status = "okay";
++};
++
++&sdmmc1 {
++ bus-width = <4>;
++ no-1-8-v;
++ sdhci-caps-mask = <0x0 0x00200000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_sdmmc1_default>;
++ status = "okay";
++};
++
++&sdmmc2 {
++ bus-width = <4>;
++ no-1-8-v;
++ sdhci-caps-mask = <0x0 0x00200000>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_sdmmc2_default>;
++};
++
++&spdifrx {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_spdifrx_default>;
++ status = "okay";
++};
++
++&spdiftx {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pinctrl_spdiftx_default>;
++ status = "okay";
++};
++
++&trng {
++ status = "okay";
++};
++
++&vddout25 {
++ vin-supply = <&vdd_3v3>;
++ status = "okay";
++};
+diff --git a/arch/arm/boot/dts/sama7g5-pinfunc.h b/arch/arm/boot/dts/sama7g5-pinfunc.h
+new file mode 100644
+index 000000000000..22fe9e522a97
+--- /dev/null
++++ b/arch/arm/boot/dts/sama7g5-pinfunc.h
+@@ -0,0 +1,923 @@
++/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
++#define PINMUX_PIN(no, func, ioset) \
++(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20))
++
++#define PIN_PA0 0
++#define PIN_PA0__GPIO PINMUX_PIN(PIN_PA0, 0, 0)
++#define PIN_PA0__SDMMC0_CK PINMUX_PIN(PIN_PA0, 1, 1)
++#define PIN_PA0__FLEXCOM0_IO0 PINMUX_PIN(PIN_PA0, 2, 1)
++#define PIN_PA0__CANTX3 PINMUX_PIN(PIN_PA0, 3, 1)
++#define PIN_PA0__PWML0 PINMUX_PIN(PIN_PA0, 5, 2)
++#define PIN_PA1 1
++#define PIN_PA1__GPIO PINMUX_PIN(PIN_PA1, 0, 0)
++#define PIN_PA1__SDMMC0_CMD PINMUX_PIN(PIN_PA1, 1, 1)
++#define PIN_PA1__FLEXCOM0_IO1 PINMUX_PIN(PIN_PA1, 2, 1)
++#define PIN_PA1__CANRX3 PINMUX_PIN(PIN_PA1, 3, 1)
++#define PIN_PA1__D14 PINMUX_PIN(PIN_PA1, 4, 1)
++#define PIN_PA1__PWMH0 PINMUX_PIN(PIN_PA1, 5, 3)
++#define PIN_PA2 2
++#define PIN_PA2__GPIO PINMUX_PIN(PIN_PA2, 0, 0)
++#define PIN_PA2__SDMMC0_RSTN PINMUX_PIN(PIN_PA2, 1, 1)
++#define PIN_PA2__FLEXCOM0_IO2 PINMUX_PIN(PIN_PA2, 2, 1)
++#define PIN_PA2__PDMC1_CLK PINMUX_PIN(PIN_PA2, 3, 1)
++#define PIN_PA2__D15 PINMUX_PIN(PIN_PA2, 4, 1)
++#define PIN_PA2__PWMH1 PINMUX_PIN(PIN_PA2, 5, 3)
++#define PIN_PA2__FLEXCOM1_IO0 PINMUX_PIN(PIN_PA2, 6, 3)
++#define PIN_PA3 3
++#define PIN_PA3__GPIO PINMUX_PIN(PIN_PA3, 0, 0)
++#define PIN_PA3__SDMMC0_DAT0 PINMUX_PIN(PIN_PA3, 1, 1)
++#define PIN_PA3__FLEXCOM0_IO3 PINMUX_PIN(PIN_PA3, 2, 1)
++#define PIN_PA3__PDMC1_DS0 PINMUX_PIN(PIN_PA3, 3, 1)
++#define PIN_PA3__NWR1_NBS1 PINMUX_PIN(PIN_PA3, 4, 1)
++#define PIN_PA3__PWML3 PINMUX_PIN(PIN_PA3, 5, 3)
++#define PIN_PA3__FLEXCOM1_IO1 PINMUX_PIN(PIN_PA3, 6, 3)
++#define PIN_PA4 4
++#define PIN_PA4__GPIO PINMUX_PIN(PIN_PA4, 0, 0)
++#define PIN_PA4__SDMMC0_DAT1 PINMUX_PIN(PIN_PA4, 1, 1)
++#define PIN_PA4__FLEXCOM0_IO4 PINMUX_PIN(PIN_PA4, 2, 1)
++#define PIN_PA4__PDMC1_DS1 PINMUX_PIN(PIN_PA4, 3, 1)
++#define PIN_PA4__NCS2 PINMUX_PIN(PIN_PA4, 4, 1)
++#define PIN_PA4__PWMH3 PINMUX_PIN(PIN_PA4, 5, 3)
++#define PIN_PA4__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA4, 6, 3)
++#define PIN_PA5 5
++#define PIN_PA5__GPIO PINMUX_PIN(PIN_PA5, 0, 0)
++#define PIN_PA5__SDMMC0_DAT2 PINMUX_PIN(PIN_PA5, 1, 1)
++#define PIN_PA5__FLEXCOM1_IO0 PINMUX_PIN(PIN_PA5, 2, 1)
++#define PIN_PA5__CANTX2 PINMUX_PIN(PIN_PA5, 3, 1)
++#define PIN_PA5__A23 PINMUX_PIN(PIN_PA5, 4, 1)
++#define PIN_PA5__PWMEXTRG0 PINMUX_PIN(PIN_PA5, 5, 3)
++#define PIN_PA5__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA5, 6, 3)
++#define PIN_PA6 6
++#define PIN_PA6__GPIO PINMUX_PIN(PIN_PA6, 0, 0)
++#define PIN_PA6__SDMMC0_DAT3 PINMUX_PIN(PIN_PA6, 1, 1)
++#define PIN_PA6__FLEXCOM1_IO1 PINMUX_PIN(PIN_PA6, 2, 1)
++#define PIN_PA6__CANRX2 PINMUX_PIN(PIN_PA6, 3, 1)
++#define PIN_PA6__A24 PINMUX_PIN(PIN_PA6, 4, 1)
++#define PIN_PA6__PWMEXTRG1 PINMUX_PIN(PIN_PA6, 5, 3)
++#define PIN_PA6__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA6, 6, 3)
++#define PIN_PA7 7
++#define PIN_PA7__GPIO PINMUX_PIN(PIN_PA7, 0, 0)
++#define PIN_PA7__SDMMC0_DAT4 PINMUX_PIN(PIN_PA7, 1, 1)
++#define PIN_PA7__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA7, 2, 1)
++#define PIN_PA7__CANTX1 PINMUX_PIN(PIN_PA7, 3, 1)
++#define PIN_PA7__NWAIT PINMUX_PIN(PIN_PA7, 4, 1)
++#define PIN_PA7__PWMFI0 PINMUX_PIN(PIN_PA7, 5, 3)
++#define PIN_PA7__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA7, 6, 3)
++#define PIN_PA8 8
++#define PIN_PA8__GPIO PINMUX_PIN(PIN_PA8, 0, 0)
++#define PIN_PA8__SDMMC0_DAT5 PINMUX_PIN(PIN_PA8, 1, 1)
++#define PIN_PA8__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA8, 2, 1)
++#define PIN_PA8__CANRX1 PINMUX_PIN(PIN_PA8, 3, 1)
++#define PIN_PA8__NCS0 PINMUX_PIN(PIN_PA8, 4, 1)
++#define PIN_PA8__PWMIF1 PINMUX_PIN(PIN_PA8, 5, 3)
++#define PIN_PA8__FLEXCOM4_IO0 PINMUX_PIN(PIN_PA8, 6, 3)
++#define PIN_PA9 9
++#define PIN_PA9__GPIO PINMUX_PIN(PIN_PA9, 0, 0)
++#define PIN_PA9__SDMMC0_DAT6 PINMUX_PIN(PIN_PA9, 1, 1)
++#define PIN_PA9__FLEXCOM2_IO2 PINMUX_PIN(PIN_PA9, 2, 1)
++#define PIN_PA9__CANTX0 PINMUX_PIN(PIN_PA9, 3, 1)
++#define PIN_PA9__SMCK PINMUX_PIN(PIN_PA9, 4, 1)
++#define PIN_PA9__SPDIF_RX PINMUX_PIN(PIN_PA9, 5, 1)
++#define PIN_PA9__FLEXCOM4_IO1 PINMUX_PIN(PIN_PA9, 6, 3)
++#define PIN_PA10 10
++#define PIN_PA10__GPIO PINMUX_PIN(PIN_PA10, 0, 0)
++#define PIN_PA10__SDMMC0_DAT7 PINMUX_PIN(PIN_PA10, 1, 1)
++#define PIN_PA10__FLEXCOM2_IO3 PINMUX_PIN(PIN_PA10, 2, 1)
++#define PIN_PA10__CANRX0 PINMUX_PIN(PIN_PA10, 3, 1)
++#define PIN_PA10__NCS1 PINMUX_PIN(PIN_PA10, 4, 1)
++#define PIN_PA10__SPDIF_TX PINMUX_PIN(PIN_PA10, 5, 1)
++#define PIN_PA10__FLEXCOM5_IO0 PINMUX_PIN(PIN_PA10, 6, 3)
++#define PIN_PA11 11
++#define PIN_PA11__GPIO PINMUX_PIN(PIN_PA11, 0, 0)
++#define PIN_PA11__SDMMC0_DS PINMUX_PIN(PIN_PA11, 1, 1)
++#define PIN_PA11__FLEXCOM2_IO4 PINMUX_PIN(PIN_PA11, 2, 1)
++#define PIN_PA11__A0_NBS0 PINMUX_PIN(PIN_PA11, 4, 1)
++#define PIN_PA11__TIOA0 PINMUX_PIN(PIN_PA11, 5, 1)
++#define PIN_PA11__FLEXCOM5_IO1 PINMUX_PIN(PIN_PA11, 6, 3)
++#define PIN_PA12 12
++#define PIN_PA12__GPIO PINMUX_PIN(PIN_PA12, 0, 0)
++#define PIN_PA12__SDMMC0_WP PINMUX_PIN(PIN_PA12, 1, 1)
++#define PIN_PA12__FLEXCOM1_IO3 PINMUX_PIN(PIN_PA12, 2, 1)
++#define PIN_PA12__FLEXCOM3_IO5 PINMUX_PIN(PIN_PA12, 4, 1)
++#define PIN_PA12__PWML2 PINMUX_PIN(PIN_PA12, 5, 3)
++#define PIN_PA12__FLEXCOM6_IO0 PINMUX_PIN(PIN_PA12, 6, 3)
++#define PIN_PA13 13
++#define PIN_PA13__GPIO PINMUX_PIN(PIN_PA13, 0, 0)
++#define PIN_PA13__SDMMC0_1V8SEL PINMUX_PIN(PIN_PA13, 1, 1)
++#define PIN_PA13__FLEXCOM1_IO2 PINMUX_PIN(PIN_PA13, 2, 1)
++#define PIN_PA13__FLEXCOM3_IO6 PINMUX_PIN(PIN_PA13, 4, 1)
++#define PIN_PA13__PWMH2 PINMUX_PIN(PIN_PA13, 5, 3)
++#define PIN_PA13__FLEXCOM6_IO1 PINMUX_PIN(PIN_PA13, 6, 3)
++#define PIN_PA14 14
++#define PIN_PA14__GPIO PINMUX_PIN(PIN_PA14, 0, 0)
++#define PIN_PA14__SDMMC0_CD PINMUX_PIN(PIN_PA14, 1, 1)
++#define PIN_PA14__FLEXCOM1_IO4 PINMUX_PIN(PIN_PA14, 2, 1)
++#define PIN_PA14__A25 PINMUX_PIN(PIN_PA14, 4, 1)
++#define PIN_PA14__PWML1 PINMUX_PIN(PIN_PA14, 5, 3)
++#define PIN_PA15 15
++#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0)
++#define PIN_PA15__G0_TXEN PINMUX_PIN(PIN_PA15, 1, 1)
++#define PIN_PA15__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA15, 2, 1)
++#define PIN_PA15__ISC_MCK PINMUX_PIN(PIN_PA15, 3, 1)
++#define PIN_PA15__A1 PINMUX_PIN(PIN_PA15, 4, 1)
++#define PIN_PA15__TIOB0 PINMUX_PIN(PIN_PA15, 5, 1)
++#define PIN_PA16 16
++#define PIN_PA16__GPIO PINMUX_PIN(PIN_PA16, 0, 0)
++#define PIN_PA16__G0_TX0 PINMUX_PIN(PIN_PA16, 1, 1)
++#define PIN_PA16__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA16, 2, 1)
++#define PIN_PA16__ISC_D0 PINMUX_PIN(PIN_PA16, 3, 1)
++#define PIN_PA16__A2 PINMUX_PIN(PIN_PA16, 4, 1)
++#define PIN_PA16__TCLK0 PINMUX_PIN(PIN_PA16, 5, 1)
++#define PIN_PA17 17
++#define PIN_PA17__GPIO PINMUX_PIN(PIN_PA17, 0, 0)
++#define PIN_PA17__G0_TX1 PINMUX_PIN(PIN_PA17, 1, 1)
++#define PIN_PA17__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA17, 2, 1)
++#define PIN_PA17__ISC_D1 PINMUX_PIN(PIN_PA17, 3, 1)
++#define PIN_PA17__A3 PINMUX_PIN(PIN_PA17, 4, 1)
++#define PIN_PA17__TIOA1 PINMUX_PIN(PIN_PA17, 5, 1)
++#define PIN_PA18 18
++#define PIN_PA18__GPIO PINMUX_PIN(PIN_PA18, 0, 0)
++#define PIN_PA18__G0_RXDV PINMUX_PIN(PIN_PA18, 1, 1)
++#define PIN_PA18__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA18, 2, 1)
++#define PIN_PA18__ISC_D2 PINMUX_PIN(PIN_PA18, 3, 1)
++#define PIN_PA18__A4 PINMUX_PIN(PIN_PA18, 4, 1)
++#define PIN_PA18__TIOB1 PINMUX_PIN(PIN_PA18, 5, 1)
++#define PIN_PA19 19
++#define PIN_PA19__GPIO PINMUX_PIN(PIN_PA19, 0, 0)
++#define PIN_PA19__G0_RX0 PINMUX_PIN(PIN_PA19, 1, 1)
++#define PIN_PA19__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA19, 2, 1)
++#define PIN_PA19__ISC_D3 PINMUX_PIN(PIN_PA19, 3, 1)
++#define PIN_PA19__A5 PINMUX_PIN(PIN_PA19, 4, 1)
++#define PIN_PA19__TCLK1 PINMUX_PIN(PIN_PA19, 5, 1)
++#define PIN_PA20 20
++#define PIN_PA20__GPIO PINMUX_PIN(PIN_PA20, 0, 0)
++#define PIN_PA20__G0_RX1 PINMUX_PIN(PIN_PA20, 1, 1)
++#define PIN_PA20__FLEXCOM4_IO0 PINMUX_PIN(PIN_PA20, 2, 1)
++#define PIN_PA20__ISC_D4 PINMUX_PIN(PIN_PA20, 3, 1)
++#define PIN_PA20__A6 PINMUX_PIN(PIN_PA20, 4, 1)
++#define PIN_PA20__TIOA2 PINMUX_PIN(PIN_PA20, 5, 1)
++#define PIN_PA21 21
++#define PIN_PA21__GPIO PINMUX_PIN(PIN_PA21, 0, 0)
++#define PIN_PA21__G0_RXER PINMUX_PIN(PIN_PA21, 1, 1)
++#define PIN_PA21__FLEXCOM4_IO1 PINMUX_PIN(PIN_PA21, 2, 1)
++#define PIN_PA21__ISC_D5 PINMUX_PIN(PIN_PA21, 3, 1)
++#define PIN_PA21__A7 PINMUX_PIN(PIN_PA21, 4, 1)
++#define PIN_PA21__TIOB2 PINMUX_PIN(PIN_PA21, 5, 1)
++#define PIN_PA22 22
++#define PIN_PA22__GPIO PINMUX_PIN(PIN_PA22, 0, 0)
++#define PIN_PA22__G0_MDC PINMUX_PIN(PIN_PA22, 1, 1)
++#define PIN_PA22__FLEXCOM4_IO2 PINMUX_PIN(PIN_PA22, 2, 1)
++#define PIN_PA22__ISC_D6 PINMUX_PIN(PIN_PA22, 3, 1)
++#define PIN_PA22__A8 PINMUX_PIN(PIN_PA22, 4, 1)
++#define PIN_PA22__TCLK2 PINMUX_PIN(PIN_PA22, 5, 1)
++#define PIN_PA23 23
++#define PIN_PA23__GPIO PINMUX_PIN(PIN_PA23, 0, 0)
++#define PIN_PA23__G0_MDIO PINMUX_PIN(PIN_PA23, 1, 1)
++#define PIN_PA23__FLEXCOM4_IO3 PINMUX_PIN(PIN_PA23, 2, 1)
++#define PIN_PA23__ISC_D7 PINMUX_PIN(PIN_PA23, 3, 1)
++#define PIN_PA23__A9 PINMUX_PIN(PIN_PA23, 4, 1)
++#define PIN_PA24 24
++#define PIN_PA24__GPIO PINMUX_PIN(PIN_PA24, 0, 0)
++#define PIN_PA24__G0_TXCK PINMUX_PIN(PIN_PA24, 1, 1)
++#define PIN_PA24__FLEXCOM4_IO4 PINMUX_PIN(PIN_PA24, 2, 1)
++#define PIN_PA24__ISC_HSYNC PINMUX_PIN(PIN_PA24, 3, 1)
++#define PIN_PA24__A10 PINMUX_PIN(PIN_PA24, 4, 1)
++#define PIN_PA24__FLEXCOM0_IO5 PINMUX_PIN(PIN_PA24, 5, 1)
++#define PIN_PA25 25
++#define PIN_PA25__GPIO PINMUX_PIN(PIN_PA25, 0, 0)
++#define PIN_PA25__G0_125CK PINMUX_PIN(PIN_PA25, 1, 1)
++#define PIN_PA25__FLEXCOM5_IO4 PINMUX_PIN(PIN_PA25, 2, 1)
++#define PIN_PA25__ISC_VSYNC PINMUX_PIN(PIN_PA25, 3, 1)
++#define PIN_PA25__A11 PINMUX_PIN(PIN_PA25, 4, 1)
++#define PIN_PA25__FLEXCOM0_IO6 PINMUX_PIN(PIN_PA25, 5, 1)
++#define PIN_PA25__FLEXCOM7_IO0 PINMUX_PIN(PIN_PA25, 6, 3)
++#define PIN_PA26 26
++#define PIN_PA26__GPIO PINMUX_PIN(PIN_PA26, 0, 0)
++#define PIN_PA26__G0_TX2 PINMUX_PIN(PIN_PA26, 1, 1)
++#define PIN_PA26__FLEXCOM5_IO2 PINMUX_PIN(PIN_PA26, 2, 1)
++#define PIN_PA26__ISC_FIELD PINMUX_PIN(PIN_PA26, 3, 1)
++#define PIN_PA26__A12 PINMUX_PIN(PIN_PA26, 4, 1)
++#define PIN_PA26__TF0 PINMUX_PIN(PIN_PA26, 5, 1)
++#define PIN_PA26__FLEXCOM7_IO1 PINMUX_PIN(PIN_PA26, 6, 3)
++#define PIN_PA27 27
++#define PIN_PA27__GPIO PINMUX_PIN(PIN_PA27, 0, 0)
++#define PIN_PA27__G0_TX3 PINMUX_PIN(PIN_PA27, 1, 1)
++#define PIN_PA27__FLEXCOM5_IO3 PINMUX_PIN(PIN_PA27, 2, 1)
++#define PIN_PA27__ISC_PCK PINMUX_PIN(PIN_PA27, 3, 1)
++#define PIN_PA27__A13 PINMUX_PIN(PIN_PA27, 4, 1)
++#define PIN_PA27__TK0 PINMUX_PIN(PIN_PA27, 5, 1)
++#define PIN_PA27__FLEXCOM8_IO0 PINMUX_PIN(PIN_PA27, 6, 3)
++#define PIN_PA28 28
++#define PIN_PA28__GPIO PINMUX_PIN(PIN_PA28, 0, 0)
++#define PIN_PA28__G0_RX2 PINMUX_PIN(PIN_PA28, 1, 1)
++#define PIN_PA28__FLEXCOM5_IO0 PINMUX_PIN(PIN_PA28, 2, 1)
++#define PIN_PA28__ISC_D8 PINMUX_PIN(PIN_PA28, 3, 1)
++#define PIN_PA28__A14 PINMUX_PIN(PIN_PA28, 4, 1)
++#define PIN_PA28__RD0 PINMUX_PIN(PIN_PA28, 5, 1)
++#define PIN_PA28__FLEXCOM8_IO1 PINMUX_PIN(PIN_PA28, 6, 3)
++#define PIN_PA29 29
++#define PIN_PA29__GPIO PINMUX_PIN(PIN_PA29, 0, 0)
++#define PIN_PA29__G0_RX3 PINMUX_PIN(PIN_PA29, 1, 1)
++#define PIN_PA29__FLEXCOM5_IO1 PINMUX_PIN(PIN_PA29, 2, 1)
++#define PIN_PA29__ISC_D9 PINMUX_PIN(PIN_PA29, 3, 1)
++#define PIN_PA29__A15 PINMUX_PIN(PIN_PA29, 4, 1)
++#define PIN_PA29__RF0 PINMUX_PIN(PIN_PA29, 5, 1)
++#define PIN_PA29__FLEXCOM9_IO0 PINMUX_PIN(PIN_PA29, 6, 3)
++#define PIN_PA30 30
++#define PIN_PA30__GPIO PINMUX_PIN(PIN_PA30, 0, 0)
++#define PIN_PA30__G0_RXCK PINMUX_PIN(PIN_PA30, 1, 1)
++#define PIN_PA30__FLEXCOM6_IO4 PINMUX_PIN(PIN_PA30, 2, 1)
++#define PIN_PA30__ISC_D10 PINMUX_PIN(PIN_PA30, 3, 1)
++#define PIN_PA30__A16 PINMUX_PIN(PIN_PA30, 4, 1)
++#define PIN_PA30__RK0 PINMUX_PIN(PIN_PA30, 5, 1)
++#define PIN_PA30__FLEXCOM9_IO1 PINMUX_PIN(PIN_PA30, 6, 3)
++#define PIN_PA31 31
++#define PIN_PA31__GPIO PINMUX_PIN(PIN_PA31, 0, 0)
++#define PIN_PA31__G0_TXER PINMUX_PIN(PIN_PA31, 1, 1)
++#define PIN_PA31__FLEXCOM6_IO2 PINMUX_PIN(PIN_PA31, 2, 1)
++#define PIN_PA31__ISC_D11 PINMUX_PIN(PIN_PA31, 3, 1)
++#define PIN_PA31__A17 PINMUX_PIN(PIN_PA31, 4, 1)
++#define PIN_PA31__TD0 PINMUX_PIN(PIN_PA31, 5, 1)
++#define PIN_PA31__FLEXCOM10_IO0 PINMUX_PIN(PIN_PA31, 6, 3)
++#define PIN_PB0 32
++#define PIN_PB0__GPIO PINMUX_PIN(PIN_PB0, 0, 0)
++#define PIN_PB0__G0_COL PINMUX_PIN(PIN_PB0, 1, 1)
++#define PIN_PB0__FLEXCOM6_IO3 PINMUX_PIN(PIN_PB0, 2, 2)
++#define PIN_PB0__EXT_IRQ0 PINMUX_PIN(PIN_PB0, 3, 1)
++#define PIN_PB0__A18 PINMUX_PIN(PIN_PB0, 4, 1)
++#define PIN_PB0__SPDIF_RX PINMUX_PIN(PIN_PB0, 5, 2)
++#define PIN_PB0__FLEXCOM10_IO1 PINMUX_PIN(PIN_PB0, 6, 3)
++#define PIN_PB1 33
++#define PIN_PB1__GPIO PINMUX_PIN(PIN_PB1, 0, 0)
++#define PIN_PB1__G0_CRS PINMUX_PIN(PIN_PB1, 1, 1)
++#define PIN_PB1__FLEXCOM6_IO1 PINMUX_PIN(PIN_PB1, 2, 2)
++#define PIN_PB1__EXT_IRQ1 PINMUX_PIN(PIN_PB1, 3, 1)
++#define PIN_PB1__A19 PINMUX_PIN(PIN_PB1, 4, 1)
++#define PIN_PB1__SPDIF_TX PINMUX_PIN(PIN_PB1, 5, 2)
++#define PIN_PB1__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB1, 6, 3)
++#define PIN_PB2 34
++#define PIN_PB2__GPIO PINMUX_PIN(PIN_PB2, 0, 0)
++#define PIN_PB2__G0_TSUCOMP PINMUX_PIN(PIN_PB2, 1, 1)
++#define PIN_PB2__FLEXCOM6_IO0 PINMUX_PIN(PIN_PB2, 2, 1)
++#define PIN_PB2__ADTRG PINMUX_PIN(PIN_PB2, 3, 1)
++#define PIN_PB2__A20 PINMUX_PIN(PIN_PB2, 4, 1)
++#define PIN_PB2__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB2, 6, 3)
++#define PIN_PB3 35
++#define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0)
++#define PIN_PB3__RF1 PINMUX_PIN(PIN_PB3, 1, 1)
++#define PIN_PB3__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB3, 2, 1)
++#define PIN_PB3__PCK2 PINMUX_PIN(PIN_PB3, 3, 2)
++#define PIN_PB3__D8 PINMUX_PIN(PIN_PB3, 4, 1)
++#define PIN_PB4 36
++#define PIN_PB4__GPIO PINMUX_PIN(PIN_PB4, 0, 0)
++#define PIN_PB4__TF1 PINMUX_PIN(PIN_PB4, 1, 1)
++#define PIN_PB4__FLEXCOM11_IO1 PINMUX_PIN(PIN_PB4, 2, 1)
++#define PIN_PB4__PCK3 PINMUX_PIN(PIN_PB4, 3, 2)
++#define PIN_PB4__D9 PINMUX_PIN(PIN_PB4, 4, 1)
++#define PIN_PB5 37
++#define PIN_PB5__GPIO PINMUX_PIN(PIN_PB5, 0, 0)
++#define PIN_PB5__TK1 PINMUX_PIN(PIN_PB5, 1, 1)
++#define PIN_PB5__FLEXCOM11_IO2 PINMUX_PIN(PIN_PB5, 2, 1)
++#define PIN_PB5__PCK4 PINMUX_PIN(PIN_PB5, 3, 2)
++#define PIN_PB5__D10 PINMUX_PIN(PIN_PB5, 4, 1)
++#define PIN_PB6 38
++#define PIN_PB6__GPIO PINMUX_PIN(PIN_PB6, 0, 0)
++#define PIN_PB6__RK1 PINMUX_PIN(PIN_PB6, 1, 1)
++#define PIN_PB6__FLEXCOM11_IO3 PINMUX_PIN(PIN_PB6, 2, 1)
++#define PIN_PB6__PCK5 PINMUX_PIN(PIN_PB6, 3, 2)
++#define PIN_PB6__D11 PINMUX_PIN(PIN_PB6, 4, 1)
++#define PIN_PB7 39
++#define PIN_PB7__GPIO PINMUX_PIN(PIN_PB7, 0, 0)
++#define PIN_PB7__TD1 PINMUX_PIN(PIN_PB7, 1, 1)
++#define PIN_PB7__FLEXCOM11_IO4 PINMUX_PIN(PIN_PB7, 2, 1)
++#define PIN_PB7__FLEXCOM3_IO5 PINMUX_PIN(PIN_PB7, 3, 2)
++#define PIN_PB7__D12 PINMUX_PIN(PIN_PB7, 4, 1)
++#define PIN_PB8 40
++#define PIN_PB8__GPIO PINMUX_PIN(PIN_PB8, 0, 0)
++#define PIN_PB8__RD1 PINMUX_PIN(PIN_PB8, 1, 1)
++#define PIN_PB8__FLEXCOM8_IO0 PINMUX_PIN(PIN_PB8, 2, 1)
++#define PIN_PB8__FLEXCOM3_IO6 PINMUX_PIN(PIN_PB8, 3, 2)
++#define PIN_PB8__D13 PINMUX_PIN(PIN_PB8, 4, 1)
++#define PIN_PB9 41
++#define PIN_PB9__GPIO PINMUX_PIN(PIN_PB9, 0, 0)
++#define PIN_PB9__QSPI0_IO3 PINMUX_PIN(PIN_PB9, 1, 1)
++#define PIN_PB9__FLEXCOM8_IO1 PINMUX_PIN(PIN_PB9, 2, 1)
++#define PIN_PB9__PDMC0_CLK PINMUX_PIN(PIN_PB9, 3, 1)
++#define PIN_PB9__NCS3_NANDCS PINMUX_PIN(PIN_PB9, 4, 1)
++#define PIN_PB9__PWML0 PINMUX_PIN(PIN_PB9, 5, 2)
++#define PIN_PB10 42
++#define PIN_PB10__GPIO PINMUX_PIN(PIN_PB10, 0, 0)
++#define PIN_PB10__QSPI0_IO2 PINMUX_PIN(PIN_PB10, 1, 1)
++#define PIN_PB10__FLEXCOM8_IO2 PINMUX_PIN(PIN_PB10, 2, 1)
++#define PIN_PB10__PDMC0_DS0 PINMUX_PIN(PIN_PB10, 3, 1)
++#define PIN_PB10__NWE_NWR0_NANDWE PINMUX_PIN(PIN_PB10, 4, 1)
++#define PIN_PB10__PWMH0 PINMUX_PIN(PIN_PB10, 5, 2)
++#define PIN_PB11 43
++#define PIN_PB11__GPIO PINMUX_PIN(PIN_PB11, 0, 0)
++#define PIN_PB11__QSPI0_IO1 PINMUX_PIN(PIN_PB11, 1, 1)
++#define PIN_PB11__FLEXCOM8_IO3 PINMUX_PIN(PIN_PB11, 2, 1)
++#define PIN_PB11__PDMC0_DS1 PINMUX_PIN(PIN_PB11, 3, 1)
++#define PIN_PB11__NRD_NANDOE PINMUX_PIN(PIN_PB11, 4, 1)
++#define PIN_PB11__PWML1 PINMUX_PIN(PIN_PB11, 5, 2)
++#define PIN_PB12 44
++#define PIN_PB12__GPIO PINMUX_PIN(PIN_PB12, 0, 0)
++#define PIN_PB12__QSPI0_IO0 PINMUX_PIN(PIN_PB12, 1, 1)
++#define PIN_PB12__FLEXCOM8_IO4 PINMUX_PIN(PIN_PB12, 2, 1)
++#define PIN_PB12__FLEXCOM6_IO5 PINMUX_PIN(PIN_PB12, 3, 1)
++#define PIN_PB12__A21_NANDALE PINMUX_PIN(PIN_PB12, 4, 1)
++#define PIN_PB12__PWMH1 PINMUX_PIN(PIN_PB12, 5, 2)
++#define PIN_PB13 45
++#define PIN_PB13__GPIO PINMUX_PIN(PIN_PB13, 0, 0)
++#define PIN_PB13__QSPI0_CS PINMUX_PIN(PIN_PB13, 1, 1)
++#define PIN_PB13__FLEXCOM9_IO0 PINMUX_PIN(PIN_PB13, 2, 1)
++#define PIN_PB13__FLEXCOM6_IO6 PINMUX_PIN(PIN_PB13, 3, 1)
++#define PIN_PB13__A22_NANDCLE PINMUX_PIN(PIN_PB13, 4, 1)
++#define PIN_PB13__PWML2 PINMUX_PIN(PIN_PB13, 5, 2)
++#define PIN_PB14 46
++#define PIN_PB14__GPIO PINMUX_PIN(PIN_PB14, 0, 0)
++#define PIN_PB14__QSPI0_SCK PINMUX_PIN(PIN_PB14, 1, 1)
++#define PIN_PB14__FLEXCOM9_IO1 PINMUX_PIN(PIN_PB14, 2, 1)
++#define PIN_PB14__D0 PINMUX_PIN(PIN_PB14, 4, 1)
++#define PIN_PB14__PWMH2 PINMUX_PIN(PIN_PB14, 5, 2)
++#define PIN_PB15 47
++#define PIN_PB15__GPIO PINMUX_PIN(PIN_PB15, 0, 0)
++#define PIN_PB15__QSPI0_SCKN PINMUX_PIN(PIN_PB15, 1, 1)
++#define PIN_PB15__FLEXCOM9_IO2 PINMUX_PIN(PIN_PB15, 2, 1)
++#define PIN_PB15__D1 PINMUX_PIN(PIN_PB15, 4, 1)
++#define PIN_PB15__PWML3 PINMUX_PIN(PIN_PB15, 5, 2)
++#define PIN_PB16 48
++#define PIN_PB16__GPIO PINMUX_PIN(PIN_PB16, 0, 0)
++#define PIN_PB16__QSPI0_IO4 PINMUX_PIN(PIN_PB16, 1, 1)
++#define PIN_PB16__FLEXCOM9_IO3 PINMUX_PIN(PIN_PB16, 2, 1)
++#define PIN_PB16__PCK0 PINMUX_PIN(PIN_PB16, 3, 1)
++#define PIN_PB16__D2 PINMUX_PIN(PIN_PB16, 4, 1)
++#define PIN_PB16__PWMH3 PINMUX_PIN(PIN_PB16, 5, 2)
++#define PIN_PB16__EXT_IRQ0 PINMUX_PIN(PIN_PB16, 6, 2)
++#define PIN_PB17 49
++#define PIN_PB17__GPIO PINMUX_PIN(PIN_PB17, 0, 0)
++#define PIN_PB17__QSPI0_IO5 PINMUX_PIN(PIN_PB17, 1, 1)
++#define PIN_PB17__FLEXCOM9_IO4 PINMUX_PIN(PIN_PB17, 2, 1)
++#define PIN_PB17__PCK1 PINMUX_PIN(PIN_PB17, 3, 1)
++#define PIN_PB17__D3 PINMUX_PIN(PIN_PB17, 4, 1)
++#define PIN_PB17__PWMEXTRG0 PINMUX_PIN(PIN_PB17, 5, 2)
++#define PIN_PB17__EXT_IRQ1 PINMUX_PIN(PIN_PB17, 6, 2)
++#define PIN_PB18 50
++#define PIN_PB18__GPIO PINMUX_PIN(PIN_PB18, 0, 0)
++#define PIN_PB18__QSPI0_IO6 PINMUX_PIN(PIN_PB18, 1, 1)
++#define PIN_PB18__FLEXCOM10_IO0 PINMUX_PIN(PIN_PB18, 2, 1)
++#define PIN_PB18__PCK2 PINMUX_PIN(PIN_PB18, 3, 1)
++#define PIN_PB18__D4 PINMUX_PIN(PIN_PB18, 4, 1)
++#define PIN_PB18__PWMEXTRG1 PINMUX_PIN(PIN_PB18, 5, 2)
++#define PIN_PB19 51
++#define PIN_PB19__GPIO PINMUX_PIN(PIN_PB19, 0, 0)
++#define PIN_PB19__QSPI0_IO7 PINMUX_PIN(PIN_PB19, 1, 1)
++#define PIN_PB19__FLEXCOM10_IO1 PINMUX_PIN(PIN_PB19, 2, 1)
++#define PIN_PB19__PCK3 PINMUX_PIN(PIN_PB19, 3, 1)
++#define PIN_PB19__D5 PINMUX_PIN(PIN_PB19, 4, 1)
++#define PIN_PB19__PWMFI0 PINMUX_PIN(PIN_PB19, 5, 2)
++#define PIN_PB20 52
++#define PIN_PB20__GPIO PINMUX_PIN(PIN_PB20, 0, 0)
++#define PIN_PB20__QSPI0_DQS PINMUX_PIN(PIN_PB20, 1, 1)
++#define PIN_PB20__FLEXCOM10_IO2 PINMUX_PIN(PIN_PB20, 2, 1)
++#define PIN_PB20__D6 PINMUX_PIN(PIN_PB20, 4, 1)
++#define PIN_PB20__PWMFI1 PINMUX_PIN(PIN_PB20, 5, 2)
++#define PIN_PB21 53
++#define PIN_PB21__GPIO PINMUX_PIN(PIN_PB21, 0, 0)
++#define PIN_PB21__QSPI0_INT PINMUX_PIN(PIN_PB21, 1, 1)
++#define PIN_PB21__FLEXCOM10_IO3 PINMUX_PIN(PIN_PB21, 2, 1)
++#define PIN_PB21__FLEXCOM9_IO5 PINMUX_PIN(PIN_PB21, 3, 1)
++#define PIN_PB21__D7 PINMUX_PIN(PIN_PB21, 4, 1)
++#define PIN_PB22 54
++#define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0)
++#define PIN_PB22__QSPI1_IO3 PINMUX_PIN(PIN_PB22, 1, 1)
++#define PIN_PB22__FLEXCOM10_IO4 PINMUX_PIN(PIN_PB22, 2, 1)
++#define PIN_PB22__FLEXCOM9_IO6 PINMUX_PIN(PIN_PB22, 3, 1)
++#define PIN_PB22__NANDRDY PINMUX_PIN(PIN_PB22, 4, 1)
++#define PIN_PB23 55
++#define PIN_PB23__GPIO PINMUX_PIN(PIN_PB23, 0, 0)
++#define PIN_PB23__QSPI1_IO2 PINMUX_PIN(PIN_PB23, 1, 1)
++#define PIN_PB23__FLEXCOM7_IO0 PINMUX_PIN(PIN_PB23, 2, 1)
++#define PIN_PB23__I2SMCC0_CK PINMUX_PIN(PIN_PB23, 3, 1)
++#define PIN_PB23__PCK4 PINMUX_PIN(PIN_PB23, 6, 1)
++#define PIN_PB24 56
++#define PIN_PB24__GPIO PINMUX_PIN(PIN_PB24, 0, 0)
++#define PIN_PB24__QSPI1_IO1 PINMUX_PIN(PIN_PB24, 1, 1)
++#define PIN_PB24__FLEXCOM7_IO1 PINMUX_PIN(PIN_PB24, 2, 1)
++#define PIN_PB24__I2SMCC0_WS PINMUX_PIN(PIN_PB24, 3, 1)
++#define PIN_PB24__PCK5 PINMUX_PIN(PIN_PB24, 6, 1)
++#define PIN_PB25 57
++#define PIN_PB25__GPIO PINMUX_PIN(PIN_PB25, 0, 0)
++#define PIN_PB25__QSPI1_IO0 PINMUX_PIN(PIN_PB25, 1, 1)
++#define PIN_PB25__FLEXCOM7_IO2 PINMUX_PIN(PIN_PB25, 2, 1)
++#define PIN_PB25__I2SMCC0_DOUT1 PINMUX_PIN(PIN_PB25, 3, 1)
++#define PIN_PB25__PCK6 PINMUX_PIN(PIN_PB25, 6, 1)
++#define PIN_PB26 58
++#define PIN_PB26__GPIO PINMUX_PIN(PIN_PB26, 0, 0)
++#define PIN_PB26__QSPI1_CS PINMUX_PIN(PIN_PB26, 1, 1)
++#define PIN_PB26__FLEXCOM7_IO3 PINMUX_PIN(PIN_PB26, 2, 1)
++#define PIN_PB26__I2SMCC0_DOUT0 PINMUX_PIN(PIN_PB26, 3, 1)
++#define PIN_PB26__PWMEXTRG0 PINMUX_PIN(PIN_PB26, 5, 1)
++#define PIN_PB26__PCK7 PINMUX_PIN(PIN_PB26, 6, 1)
++#define PIN_PB27 59
++#define PIN_PB27__GPIO PINMUX_PIN(PIN_PB27, 0, 0)
++#define PIN_PB27__QSPI1_SCK PINMUX_PIN(PIN_PB27, 1, 1)
++#define PIN_PB27__FLEXCOM7_IO4 PINMUX_PIN(PIN_PB27, 2, 1)
++#define PIN_PB27__I2SMCC0_MCK PINMUX_PIN(PIN_PB27, 3, 1)
++#define PIN_PB27__PWMEXTRG1 PINMUX_PIN(PIN_PB27, 5, 1)
++#define PIN_PB28 60
++#define PIN_PB28__GPIO PINMUX_PIN(PIN_PB28, 0, 0)
++#define PIN_PB28__SDMMC1_RSTN PINMUX_PIN(PIN_PB28, 1, 1)
++#define PIN_PB28__ADTRG PINMUX_PIN(PIN_PB28, 2, 2)
++#define PIN_PB28__PWMFI0 PINMUX_PIN(PIN_PB28, 5, 1)
++#define PIN_PB28__FLEXCOM7_IO0 PINMUX_PIN(PIN_PB28, 6, 4)
++#define PIN_PB29 61
++#define PIN_PB29__GPIO PINMUX_PIN(PIN_PB29, 0, 0)
++#define PIN_PB29__SDMMC1_CMD PINMUX_PIN(PIN_PB29, 1, 1)
++#define PIN_PB29__FLEXCOM3_IO2 PINMUX_PIN(PIN_PB29, 2, 2)
++#define PIN_PB29__FLEXCOM0_IO5 PINMUX_PIN(PIN_PB29, 3, 2)
++#define PIN_PB29__TIOA3 PINMUX_PIN(PIN_PB29, 4, 2)
++#define PIN_PB29__PWMFI1 PINMUX_PIN(PIN_PB29, 5, 1)
++#define PIN_PB29__FLEXCOM7_IO1 PINMUX_PIN(PIN_PB29, 6, 4)
++#define PIN_PB30 62
++#define PIN_PB30__GPIO PINMUX_PIN(PIN_PB30, 0, 0)
++#define PIN_PB30__SDMMC1_CK PINMUX_PIN(PIN_PB30, 1, 1)
++#define PIN_PB30__FLEXCOM3_IO3 PINMUX_PIN(PIN_PB30, 2, 2)
++#define PIN_PB30__FLEXCOM0_IO6 PINMUX_PIN(PIN_PB30, 3, 2)
++#define PIN_PB30__TIOB3 PINMUX_PIN(PIN_PB30, 4, 1)
++#define PIN_PB30__PWMH0 PINMUX_PIN(PIN_PB30, 5, 1)
++#define PIN_PB30__FLEXCOM8_IO0 PINMUX_PIN(PIN_PB30, 6, 4)
++#define PIN_PB31 63
++#define PIN_PB31__GPIO PINMUX_PIN(PIN_PB31, 0, 0)
++#define PIN_PB31__SDMMC1_DAT0 PINMUX_PIN(PIN_PB31, 1, 1)
++#define PIN_PB31__FLEXCOM3_IO4 PINMUX_PIN(PIN_PB31, 2, 2)
++#define PIN_PB31__FLEXCOM9_IO5 PINMUX_PIN(PIN_PB31, 3, 2)
++#define PIN_PB31__TCLK3 PINMUX_PIN(PIN_PB31, 4, 1)
++#define PIN_PB31__PWML0 PINMUX_PIN(PIN_PB31, 5, 1)
++#define PIN_PB31__FLEXCOM8_IO1 PINMUX_PIN(PIN_PB31, 6, 4)
++#define PIN_PC0 64
++#define PIN_PC0__GPIO PINMUX_PIN(PIN_PC0, 0, 0)
++#define PIN_PC0__SDMMC1_DAT1 PINMUX_PIN(PIN_PC0, 1, 1)
++#define PIN_PC0__FLEXCOM3_IO0 PINMUX_PIN(PIN_PC0, 2, 2)
++#define PIN_PC0__TIOA4 PINMUX_PIN(PIN_PC0, 4, 1)
++#define PIN_PC0__PWML1 PINMUX_PIN(PIN_PC0, 5, 1)
++#define PIN_PC0__FLEXCOM9_IO0 PINMUX_PIN(PIN_PC0, 6, 4)
++#define PIN_PC1 65
++#define PIN_PC1__GPIO PINMUX_PIN(PIN_PC1, 0, 0)
++#define PIN_PC1__SDMMC1_DAT2 PINMUX_PIN(PIN_PC1, 1, 1)
++#define PIN_PC1__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC1, 2, 2)
++#define PIN_PC1__TIOB4 PINMUX_PIN(PIN_PC1, 4, 1)
++#define PIN_PC1__PWMH1 PINMUX_PIN(PIN_PC1, 5, 1)
++#define PIN_PC1__FLEXCOM9_IO1 PINMUX_PIN(PIN_PC1, 6, 4)
++#define PIN_PC2 66
++#define PIN_PC2__GPIO PINMUX_PIN(PIN_PC2, 0, 0)
++#define PIN_PC2__SDMMC1_DAT3 PINMUX_PIN(PIN_PC2, 1, 1)
++#define PIN_PC2__FLEXCOM4_IO0 PINMUX_PIN(PIN_PC2, 2, 2)
++#define PIN_PC2__TCLK4 PINMUX_PIN(PIN_PC2, 4, 1)
++#define PIN_PC2__PWML2 PINMUX_PIN(PIN_PC2, 5, 1)
++#define PIN_PC2__FLEXCOM10_IO0 PINMUX_PIN(PIN_PC2, 6, 4)
++#define PIN_PC3 67
++#define PIN_PC3__GPIO PINMUX_PIN(PIN_PC3, 0, 0)
++#define PIN_PC3__SDMMC1_WP PINMUX_PIN(PIN_PC3, 1, 1)
++#define PIN_PC3__FLEXCOM4_IO1 PINMUX_PIN(PIN_PC3, 2, 2)
++#define PIN_PC3__TIOA5 PINMUX_PIN(PIN_PC3, 4, 1)
++#define PIN_PC3__PWMH2 PINMUX_PIN(PIN_PC3, 5, 1)
++#define PIN_PC3__FLEXCOM10_IO1 PINMUX_PIN(PIN_PC3, 6, 4)
++#define PIN_PC4 68
++#define PIN_PC4__GPIO PINMUX_PIN(PIN_PC4, 0, 0)
++#define PIN_PC4__SDMMC1_CD PINMUX_PIN(PIN_PC4, 1, 1)
++#define PIN_PC4__FLEXCOM4_IO2 PINMUX_PIN(PIN_PC4, 2, 2)
++#define PIN_PC4__FLEXCOM9_IO6 PINMUX_PIN(PIN_PC4, 3, 2)
++#define PIN_PC4__TIOB5 PINMUX_PIN(PIN_PC4, 4, 1)
++#define PIN_PC4__PWML3 PINMUX_PIN(PIN_PC4, 5, 1)
++#define PIN_PC4__FLEXCOM11_IO0 PINMUX_PIN(PIN_PC4, 6, 4)
++#define PIN_PC5 69
++#define PIN_PC5__GPIO PINMUX_PIN(PIN_PC5, 0, 0)
++#define PIN_PC5__SDMMC1_1V8SEL PINMUX_PIN(PIN_PC5, 1, 1)
++#define PIN_PC5__FLEXCOM4_IO3 PINMUX_PIN(PIN_PC5, 2, 2)
++#define PIN_PC5__FLEXCOM6_IO5 PINMUX_PIN(PIN_PC5, 3, 2)
++#define PIN_PC5__TCLK5 PINMUX_PIN(PIN_PC5, 4, 1)
++#define PIN_PC5__PWMH3 PINMUX_PIN(PIN_PC5, 5, 1)
++#define PIN_PC5__FLEXCOM11_IO1 PINMUX_PIN(PIN_PC5, 6, 4)
++#define PIN_PC6 70
++#define PIN_PC6__GPIO PINMUX_PIN(PIN_PC6, 0, 0)
++#define PIN_PC6__FLEXCOM4_IO4 PINMUX_PIN(PIN_PC6, 2, 2)
++#define PIN_PC6__FLEXCOM6_IO6 PINMUX_PIN(PIN_PC6, 3, 2)
++#define PIN_PC7 71
++#define PIN_PC7__GPIO PINMUX_PIN(PIN_PC7, 0, 0)
++#define PIN_PC7__I2SMCC0_DIN0 PINMUX_PIN(PIN_PC7, 1, 1)
++#define PIN_PC7__FLEXCOM7_IO0 PINMUX_PIN(PIN_PC7, 2, 2)
++#define PIN_PC8 72
++#define PIN_PC8__GPIO PINMUX_PIN(PIN_PC8, 0, 0)
++#define PIN_PC8__I2SMCC0_DIN1 PINMUX_PIN(PIN_PC8, 1, 1)
++#define PIN_PC8__FLEXCOM7_IO1 PINMUX_PIN(PIN_PC8, 2, 2)
++#define PIN_PC9 73
++#define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0)
++#define PIN_PC9__I2SMCC0_DOUT3 PINMUX_PIN(PIN_PC9, 1, 1)
++#define PIN_PC9__FLEXCOM7_IO2 PINMUX_PIN(PIN_PC9, 2, 2)
++#define PIN_PC9__FLEXCOM1_IO0 PINMUX_PIN(PIN_PC9, 6, 4)
++#define PIN_PC10 74
++#define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0)
++#define PIN_PC10__I2SMCC0_DOUT2 PINMUX_PIN(PIN_PC10, 1, 1)
++#define PIN_PC10__FLEXCOM7_IO3 PINMUX_PIN(PIN_PC10, 2, 2)
++#define PIN_PC10__FLEXCOM1_IO1 PINMUX_PIN(PIN_PC10, 6, 4)
++#define PIN_PC11 75
++#define PIN_PC11__GPIO PINMUX_PIN(PIN_PC11, 0, 0)
++#define PIN_PC11__I2SMCC1_CK PINMUX_PIN(PIN_PC11, 1, 1)
++#define PIN_PC11__FLEXCOM7_IO4 PINMUX_PIN(PIN_PC11, 2, 2)
++#define PIN_PC11__FLEXCOM2_IO0 PINMUX_PIN(PIN_PC11, 6, 4)
++#define PIN_PC12 76
++#define PIN_PC12__GPIO PINMUX_PIN(PIN_PC12, 0, 0)
++#define PIN_PC12__I2SMCC1_WS PINMUX_PIN(PIN_PC12, 1, 1)
++#define PIN_PC12__FLEXCOM8_IO2 PINMUX_PIN(PIN_PC12, 2, 2)
++#define PIN_PC12__FLEXCOM2_IO1 PINMUX_PIN(PIN_PC12, 6, 4)
++#define PIN_PC13 77
++#define PIN_PC13__GPIO PINMUX_PIN(PIN_PC13, 0, 0)
++#define PIN_PC13__I2SMCC1_MCK PINMUX_PIN(PIN_PC13, 1, 1)
++#define PIN_PC13__FLEXCOM8_IO1 PINMUX_PIN(PIN_PC13, 2, 2)
++#define PIN_PC13__FLEXCOM3_IO0 PINMUX_PIN(PIN_PC13, 6, 4)
++#define PIN_PC14 78
++#define PIN_PC14__GPIO PINMUX_PIN(PIN_PC14, 0, 0)
++#define PIN_PC14__I2SMCC1_DOUT0 PINMUX_PIN(PIN_PC14, 1, 1)
++#define PIN_PC14__FLEXCOM8_IO0 PINMUX_PIN(PIN_PC14, 2, 2)
++#define PIN_PC14__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC14, 6, 4)
++#define PIN_PC15 79
++#define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0)
++#define PIN_PC15__I2SMCC1_DOUT1 PINMUX_PIN(PIN_PC15, 1, 1)
++#define PIN_PC15__FLEXCOM8_IO3 PINMUX_PIN(PIN_PC15, 2, 2)
++#define PIN_PC15__FLEXCOM4_IO0 PINMUX_PIN(PIN_PC15, 6, 4)
++#define PIN_PC16 80
++#define PIN_PC16__GPIO PINMUX_PIN(PIN_PC16, 0, 0)
++#define PIN_PC16__I2SMCC1_DOUT2 PINMUX_PIN(PIN_PC16, 1, 1)
++#define PIN_PC16__FLEXCOM8_IO4 PINMUX_PIN(PIN_PC16, 2, 2)
++#define PIN_PC16__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC16, 6, 4)
++#define PIN_PC17 81
++#define PIN_PC17__GPIO PINMUX_PIN(PIN_PC17, 0, 0)
++#define PIN_PC17__I2SMCC1_DOUT3 PINMUX_PIN(PIN_PC17, 1, 1)
++#define PIN_PC17__EXT_IRQ0 PINMUX_PIN(PIN_PC17, 2, 3)
++#define PIN_PC17__FLEXCOM5_IO0 PINMUX_PIN(PIN_PC17, 6, 4)
++#define PIN_PC18 82
++#define PIN_PC18__GPIO PINMUX_PIN(PIN_PC18, 0, 0)
++#define PIN_PC18__I2SMCC1_DIN0 PINMUX_PIN(PIN_PC18, 1, 1)
++#define PIN_PC18__FLEXCOM9_IO0 PINMUX_PIN(PIN_PC18, 2, 2)
++#define PIN_PC18__FLEXCOM5_IO1 PINMUX_PIN(PIN_PC18, 6, 4)
++#define PIN_PC19 83
++#define PIN_PC19__GPIO PINMUX_PIN(PIN_PC19, 0, 0)
++#define PIN_PC19__I2SMCC1_DIN1 PINMUX_PIN(PIN_PC19, 1, 1)
++#define PIN_PC19__FLEXCOM9_IO1 PINMUX_PIN(PIN_PC19, 2, 2)
++#define PIN_PC19__FLEXCOM6_IO0 PINMUX_PIN(PIN_PC19, 6, 4)
++#define PIN_PC20 84
++#define PIN_PC20__GPIO PINMUX_PIN(PIN_PC20, 0, 0)
++#define PIN_PC20__I2SMCC1_DIN2 PINMUX_PIN(PIN_PC20, 1, 1)
++#define PIN_PC20__FLEXCOM9_IO4 PINMUX_PIN(PIN_PC20, 2, 2)
++#define PIN_PC20__FLEXCOM6_IO1 PINMUX_PIN(PIN_PC20, 6, 4)
++#define PIN_PC21 85
++#define PIN_PC21__GPIO PINMUX_PIN(PIN_PC21, 0, 0)
++#define PIN_PC21__I2SMCC1_DIN3 PINMUX_PIN(PIN_PC21, 1, 1)
++#define PIN_PC21__FLEXCOM9_IO2 PINMUX_PIN(PIN_PC21, 2, 2)
++#define PIN_PC21__D3 PINMUX_PIN(PIN_PC21, 4, 2)
++#define PIN_PC21__FLEXCOM6_IO0 PINMUX_PIN(PIN_PC21, 6, 5)
++#define PIN_PC22 86
++#define PIN_PC22__GPIO PINMUX_PIN(PIN_PC22, 0, 0)
++#define PIN_PC22__I2SMCC0_DIN2 PINMUX_PIN(PIN_PC22, 1, 1)
++#define PIN_PC22__FLEXCOM9_IO3 PINMUX_PIN(PIN_PC22, 2, 2)
++#define PIN_PC22__D4 PINMUX_PIN(PIN_PC22, 4, 2)
++#define PIN_PC22__FLEXCOM6_IO1 PINMUX_PIN(PIN_PC22, 6, 5)
++#define PIN_PC23 87
++#define PIN_PC23__GPIO PINMUX_PIN(PIN_PC23, 0, 0)
++#define PIN_PC23__I2SMCC0_DIN3 PINMUX_PIN(PIN_PC23, 1, 1)
++#define PIN_PC23__FLEXCOM0_IO5 PINMUX_PIN(PIN_PC23, 2, 3)
++#define PIN_PC23__D5 PINMUX_PIN(PIN_PC23, 4, 2)
++#define PIN_PC23__FLEXCOM7_IO0 PINMUX_PIN(PIN_PC23, 6, 5)
++#define PIN_PC24 88
++#define PIN_PC24__GPIO PINMUX_PIN(PIN_PC24, 0, 0)
++#define PIN_PC24__FLEXCOM0_IO6 PINMUX_PIN(PIN_PC24, 2, 3)
++#define PIN_PC24__EXT_IRQ1 PINMUX_PIN(PIN_PC24, 3, 3)
++#define PIN_PC24__D6 PINMUX_PIN(PIN_PC24, 4, 2)
++#define PIN_PC24__FLEXCOM7_IO1 PINMUX_PIN(PIN_PC24, 6, 5)
++#define PIN_PC25 89
++#define PIN_PC25__GPIO PINMUX_PIN(PIN_PC25, 0, 0)
++#define PIN_PC25__NTRST PINMUX_PIN(PIN_PC25, 1, 1)
++#define PIN_PC26 90
++#define PIN_PC26__GPIO PINMUX_PIN(PIN_PC26, 0, 0)
++#define PIN_PC26__TCK_SWCLK PINMUX_PIN(PIN_PC26, 1, 1)
++#define PIN_PC27 91
++#define PIN_PC27__GPIO PINMUX_PIN(PIN_PC27, 0, 0)
++#define PIN_PC27__TMS_SWDIO PINMUX_PIN(PIN_PC27, 1, 1)
++#define PIN_PC28 92
++#define PIN_PC28__GPIO PINMUX_PIN(PIN_PC28, 0, 0)
++#define PIN_PC28__TDI PINMUX_PIN(PIN_PC28, 1, 1)
++#define PIN_PC29 93
++#define PIN_PC29__GPIO PINMUX_PIN(PIN_PC29, 0, 0)
++#define PIN_PC29__TDO PINMUX_PIN(PIN_PC29, 1, 1)
++#define PIN_PC30 94
++#define PIN_PC30__GPIO PINMUX_PIN(PIN_PC30, 0, 0)
++#define PIN_PC30__FLEXCOM10_IO0 PINMUX_PIN(PIN_PC30, 2, 2)
++#define PIN_PC31 95
++#define PIN_PC31__GPIO PINMUX_PIN(PIN_PC31, 0, 0)
++#define PIN_PC31__FLEXCOM10_IO1 PINMUX_PIN(PIN_PC31, 2, 2)
++#define PIN_PD0 96
++#define PIN_PD0__GPIO PINMUX_PIN(PIN_PD0, 0, 0)
++#define PIN_PD0__FLEXCOM11_IO0 PINMUX_PIN(PIN_PD0, 2, 2)
++#define PIN_PD1 97
++#define PIN_PD1__GPIO PINMUX_PIN(PIN_PD1, 0, 0)
++#define PIN_PD1__FLEXCOM11_IO1 PINMUX_PIN(PIN_PD1, 2, 2)
++#define PIN_PD2 98
++#define PIN_PD2__GPIO PINMUX_PIN(PIN_PD2, 0, 0)
++#define PIN_PD2__SDMMC2_RSTN PINMUX_PIN(PIN_PD2, 1, 1)
++#define PIN_PD2__PCK0 PINMUX_PIN(PIN_PD2, 2, 2)
++#define PIN_PD2__CANTX4 PINMUX_PIN(PIN_PD2, 3, 1)
++#define PIN_PD2__D7 PINMUX_PIN(PIN_PD2, 4, 2)
++#define PIN_PD2__TIOA0 PINMUX_PIN(PIN_PD2, 5, 2)
++#define PIN_PD2__FLEXCOM8_IO0 PINMUX_PIN(PIN_PD2, 6, 5)
++#define PIN_PD3 99
++#define PIN_PD3__GPIO PINMUX_PIN(PIN_PD3, 0, 0)
++#define PIN_PD3__SDMMC2_CMD PINMUX_PIN(PIN_PD3, 1, 1)
++#define PIN_PD3__FLEXCOM0_IO0 PINMUX_PIN(PIN_PD3, 2, 2)
++#define PIN_PD3__CANRX4 PINMUX_PIN(PIN_PD3, 3, 1)
++#define PIN_PD3__NANDRDY PINMUX_PIN(PIN_PD3, 4, 2)
++#define PIN_PD3__TIOB0 PINMUX_PIN(PIN_PD3, 5, 2)
++#define PIN_PD3__FLEXCOM8_IO1 PINMUX_PIN(PIN_PD3, 6, 5)
++#define PIN_PD4 100
++#define PIN_PD4__GPIO PINMUX_PIN(PIN_PD4, 0, 0)
++#define PIN_PD4__SDMMC2_CK PINMUX_PIN(PIN_PD4, 1, 1)
++#define PIN_PD4__FLEXCOM0_IO1 PINMUX_PIN(PIN_PD4, 2, 2)
++#define PIN_PD4__CANTX5 PINMUX_PIN(PIN_PD4, 3, 1)
++#define PIN_PD4__NCS3_NANDCS PINMUX_PIN(PIN_PD4, 4, 2)
++#define PIN_PD4__TCLK0 PINMUX_PIN(PIN_PD4, 5, 2)
++#define PIN_PD4__FLEXCOM9_IO0 PINMUX_PIN(PIN_PD4, 6, 5)
++#define PIN_PD5 101
++#define PIN_PD5__GPIO PINMUX_PIN(PIN_PD5, 0, 0)
++#define PIN_PD5__SDMMC2_DAT0 PINMUX_PIN(PIN_PD5, 1, 1)
++#define PIN_PD5__FLEXCOM0_IO2 PINMUX_PIN(PIN_PD5, 2, 2)
++#define PIN_PD5__CANRX5 PINMUX_PIN(PIN_PD5, 3, 1)
++#define PIN_PD5__NWE_NWR0_NANDWE PINMUX_PIN(PIN_PD5, 4, 2)
++#define PIN_PD5__TIOA1 PINMUX_PIN(PIN_PD5, 5, 2)
++#define PIN_PD5__FLEXCOM9_IO1 PINMUX_PIN(PIN_PD5, 6, 5)
++#define PIN_PD6 102
++#define PIN_PD6__GPIO PINMUX_PIN(PIN_PD6, 0, 0)
++#define PIN_PD6__SDMMC2_DAT1 PINMUX_PIN(PIN_PD6, 1, 1)
++#define PIN_PD6__FLEXCOM0_IO3 PINMUX_PIN(PIN_PD6, 2, 2)
++#define PIN_PD6__SPDIF_RX PINMUX_PIN(PIN_PD6, 3, 3)
++#define PIN_PD6__NRD_NANDOE PINMUX_PIN(PIN_PD6, 4, 2)
++#define PIN_PD6__TIOB1 PINMUX_PIN(PIN_PD6, 5, 2)
++#define PIN_PD6__FLEXCOM10_IO0 PINMUX_PIN(PIN_PD6, 6, 5)
++#define PIN_PD7 103
++#define PIN_PD7__GPIO PINMUX_PIN(PIN_PD7, 0, 0)
++#define PIN_PD7__SDMMC2_DAT2 PINMUX_PIN(PIN_PD7, 1, 1)
++#define PIN_PD7__FLEXCOM0_IO4 PINMUX_PIN(PIN_PD7, 2, 2)
++#define PIN_PD7__SPDIF_TX PINMUX_PIN(PIN_PD7, 2, 2)
++#define PIN_PD7__A21_NANDALE PINMUX_PIN(PIN_PD7, 4, 2)
++#define PIN_PD7__TCLK1 PINMUX_PIN(PIN_PD7, 5, 2)
++#define PIN_PD7__FLEXCOM10_IO1 PINMUX_PIN(PIN_PD7, 6, 5)
++#define PIN_PD8 104
++#define PIN_PD8__GPIO PINMUX_PIN(PIN_PD8, 0, 0)
++#define PIN_PD8__SDMMC2_DAT3 PINMUX_PIN(PIN_PD8, 1, 1)
++#define PIN_PD8__I2SMCC0_DIN0 PINMUX_PIN(PIN_PD8, 3, 1)
++#define PIN_PD8__A11_NANDCLE PINMUX_PIN(PIN_PD8, 4, 2)
++#define PIN_PD8__TIOA2 PINMUX_PIN(PIN_PD8, 5, 2)
++#define PIN_PD8__FLEXCOM11_IO0 PINMUX_PIN(PIN_PD8, 6, 5)
++#define PIN_PD9 105
++#define PIN_PD9__GPIO PINMUX_PIN(PIN_PD9, 0, 0)
++#define PIN_PD9__SDMMC2_WP PINMUX_PIN(PIN_PD9, 1, 1)
++#define PIN_PD9__I2SMCC0_DIN1 PINMUX_PIN(PIN_PD9, 3, 2)
++#define PIN_PD9__D0 PINMUX_PIN(PIN_PD9, 4, 2)
++#define PIN_PD9__TIOB2 PINMUX_PIN(PIN_PD9, 5, 2)
++#define PIN_PD9__FLEXCOM11_IO1 PINMUX_PIN(PIN_PD9, 6, 5)
++#define PIN_PD10 106
++#define PIN_PD10__GPIO PINMUX_PIN(PIN_PD10, 0, 0)
++#define PIN_PD10__SDMMC2_CD PINMUX_PIN(PIN_PD10, 1, 1)
++#define PIN_PD10__PCK6 PINMUX_PIN(PIN_PD10, 2, 2)
++#define PIN_PD10__I2SMCC0_DIN2 PINMUX_PIN(PIN_PD10, 3, 2)
++#define PIN_PD10__D1 PINMUX_PIN(PIN_PD10, 4, 2)
++#define PIN_PD10__TCLK2 PINMUX_PIN(PIN_PD10, 5, 2)
++#define PIN_PD10__FLEXCOM0_IO0 PINMUX_PIN(PIN_PD10, 6, 3)
++#define PIN_PD11 107
++#define PIN_PD11__GPIO PINMUX_PIN(PIN_PD11, 0, 0)
++#define PIN_PD11__SDMMC2_1V8SEL PINMUX_PIN(PIN_PD11, 1, 1)
++#define PIN_PD11__PCK7 PINMUX_PIN(PIN_PD11, 2, 2)
++#define PIN_PD11__I2SMCC0_DIN3 PINMUX_PIN(PIN_PD11, 3, 2)
++#define PIN_PD11__D2 PINMUX_PIN(PIN_PD11, 4, 2)
++#define PIN_PD11__TIOA3 PINMUX_PIN(PIN_PD11, 5, 2)
++#define PIN_PD11__FLEXCOM0_IO1 PINMUX_PIN(PIN_PD11, 6, 3)
++#define PIN_PD12 108
++#define PIN_PD12__GPIO PINMUX_PIN(PIN_PD12, 0, 0)
++#define PIN_PD12__PCK1 PINMUX_PIN(PIN_PD12, 1, 2)
++#define PIN_PD12__FLEXCOM1_IO0 PINMUX_PIN(PIN_PD12, 2, 2)
++#define PIN_PD12__CANTX0 PINMUX_PIN(PIN_PD12, 4, 2)
++#define PIN_PD12__TIOB3 PINMUX_PIN(PIN_PD12, 5, 2)
++#define PIN_PD13 109
++#define PIN_PD13__GPIO PINMUX_PIN(PIN_PD13, 0, 0)
++#define PIN_PD13__I2SMCC0_CK PINMUX_PIN(PIN_PD13, 1, 2)
++#define PIN_PD13__FLEXCOM1_IO1 PINMUX_PIN(PIN_PD13, 2, 2)
++#define PIN_PD13__PWML0 PINMUX_PIN(PIN_PD13, 3, 4)
++#define PIN_PD13__CANRX0 PINMUX_PIN(PIN_PD13, 4, 2)
++#define PIN_PD13__TCLK3 PINMUX_PIN(PIN_PD13, 5, 2)
++#define PIN_PD14 110
++#define PIN_PD14__GPIO PINMUX_PIN(PIN_PD14, 0, 0)
++#define PIN_PD14__I2SMCC0_MCK PINMUX_PIN(PIN_PD14, 1, 2)
++#define PIN_PD14__FLEXCOM1_IO2 PINMUX_PIN(PIN_PD14, 2, 2)
++#define PIN_PD14__PWMH0 PINMUX_PIN(PIN_PD14, 3, 4)
++#define PIN_PD14__CANTX1 PINMUX_PIN(PIN_PD14, 4, 2)
++#define PIN_PD14__TIOA4 PINMUX_PIN(PIN_PD14, 5, 2)
++#define PIN_PD14__FLEXCOM2_IO0 PINMUX_PIN(PIN_PD14, 6, 5)
++#define PIN_PD15 111
++#define PIN_PD15__GPIO PINMUX_PIN(PIN_PD15, 0, 0)
++#define PIN_PD15__I2SMCC0_WS PINMUX_PIN(PIN_PD15, 1, 2)
++#define PIN_PD15__FLEXCOM1_IO3 PINMUX_PIN(PIN_PD15, 2, 2)
++#define PIN_PD15__PWML1 PINMUX_PIN(PIN_PD15, 3, 4)
++#define PIN_PD15__CANRX1 PINMUX_PIN(PIN_PD15, 4, 2)
++#define PIN_PD15__TIOB4 PINMUX_PIN(PIN_PD15, 5, 2)
++#define PIN_PD15__FLEXCOM2_IO1 PINMUX_PIN(PIN_PD15, 6, 5)
++#define PIN_PD16 112
++#define PIN_PD16__GPIO PINMUX_PIN(PIN_PD16, 0, 0)
++#define PIN_PD16__I2SMCC0_DOUT0 PINMUX_PIN(PIN_PD16, 1, 2)
++#define PIN_PD16__FLEXCOM1_IO4 PINMUX_PIN(PIN_PD16, 2, 2)
++#define PIN_PD16__PWMH1 PINMUX_PIN(PIN_PD16, 3, 4)
++#define PIN_PD16__CANTX2 PINMUX_PIN(PIN_PD16, 4, 2)
++#define PIN_PD16__TCLK4 PINMUX_PIN(PIN_PD16, 5, 2)
++#define PIN_PD16__FLEXCOM3_IO0 PINMUX_PIN(PIN_PD16, 6, 5)
++#define PIN_PD17 113
++#define PIN_PD17__GPIO PINMUX_PIN(PIN_PD17, 0, 0)
++#define PIN_PD17__I2SMCC0_DOUT1 PINMUX_PIN(PIN_PD17, 1, 2)
++#define PIN_PD17__FLEXCOM2_IO0 PINMUX_PIN(PIN_PD17, 2, 2)
++#define PIN_PD17__PWML2 PINMUX_PIN(PIN_PD17, 3, 4)
++#define PIN_PD17__CANRX2 PINMUX_PIN(PIN_PD17, 4, 2)
++#define PIN_PD17__TIOA5 PINMUX_PIN(PIN_PD17, 5, 2)
++#define PIN_PD17__FLEXCOM3_IO1 PINMUX_PIN(PIN_PD17, 6, 5)
++#define PIN_PD18 114
++#define PIN_PD18__GPIO PINMUX_PIN(PIN_PD18, 0, 0)
++#define PIN_PD18__I2SMCC0_DOUT2 PINMUX_PIN(PIN_PD18, 1, 2)
++#define PIN_PD18__FLEXCOM2_IO1 PINMUX_PIN(PIN_PD18, 2, 2)
++#define PIN_PD18__PWMH2 PINMUX_PIN(PIN_PD18, 3, 4)
++#define PIN_PD18__CANTX3 PINMUX_PIN(PIN_PD18, 4, 2)
++#define PIN_PD18__TIOB5 PINMUX_PIN(PIN_PD18, 5, 2)
++#define PIN_PD18__FLEXCOM4_IO0 PINMUX_PIN(PIN_PD18, 6, 5)
++#define PIN_PD19 115
++#define PIN_PD19__GPIO PINMUX_PIN(PIN_PD19, 0, 0)
++#define PIN_PD19__I2SMCC0_DOUT3 PINMUX_PIN(PIN_PD19, 1, 2)
++#define PIN_PD19__FLEXCOM2_IO2 PINMUX_PIN(PIN_PD19, 2, 2)
++#define PIN_PD19__PWML3 PINMUX_PIN(PIN_PD19, 3, 4)
++#define PIN_PD19__CANRX3 PINMUX_PIN(PIN_PD19, 4, 2)
++#define PIN_PD19__TCLK5 PINMUX_PIN(PIN_PD19, 5, 2)
++#define PIN_PD19__FLEXCOM4_IO1 PINMUX_PIN(PIN_PD19, 6, 5)
++#define PIN_PD20 116
++#define PIN_PD20__GPIO PINMUX_PIN(PIN_PD20, 0, 0)
++#define PIN_PD20__PCK0 PINMUX_PIN(PIN_PD20, 1, 3)
++#define PIN_PD20__FLEXCOM2_IO3 PINMUX_PIN(PIN_PD20, 2, 2)
++#define PIN_PD20__PWMH3 PINMUX_PIN(PIN_PD20, 3, 4)
++#define PIN_PD20__CANTX4 PINMUX_PIN(PIN_PD20, 5, 2)
++#define PIN_PD20__FLEXCOM5_IO0 PINMUX_PIN(PIN_PD20, 6, 5)
++#define PIN_PD21 117
++#define PIN_PD21__GPIO PINMUX_PIN(PIN_PD21, 0, 0)
++#define PIN_PD21__PCK1 PINMUX_PIN(PIN_PD21, 1, 3)
++#define PIN_PD21__FLEXCOM2_IO4 PINMUX_PIN(PIN_PD21, 2, 2)
++#define PIN_PD21__CANRX4 PINMUX_PIN(PIN_PD21, 4, 2)
++#define PIN_PD21__FLEXCOM5_IO1 PINMUX_PIN(PIN_PD21, 6, 5)
++#define PIN_PD21__G1_TXEN PINMUX_PIN(PIN_PD21, 7, 1)
++#define PIN_PD22 118
++#define PIN_PD22__GPIO PINMUX_PIN(PIN_PD22, 0, 0)
++#define PIN_PD22__PDMC0_CLK PINMUX_PIN(PIN_PD22, 1, 2)
++#define PIN_PD22__PWMEXTRG0 PINMUX_PIN(PIN_PD22, 3, 4)
++#define PIN_PD22__RD1 PINMUX_PIN(PIN_PD22, 4, 2)
++#define PIN_PD22__CANTX5 PINMUX_PIN(PIN_PD22, 6, 2)
++#define PIN_PD22__G1_TX0 PINMUX_PIN(PIN_PD22, 7, 1)
++#define PIN_PD23 119
++#define PIN_PD23__GPIO PINMUX_PIN(PIN_PD23, 0, 0)
++#define PIN_PD23__PDMC0_DS0 PINMUX_PIN(PIN_PD23, 1, 2)
++#define PIN_PD23__PWMEXTRG1 PINMUX_PIN(PIN_PD23, 3, 4)
++#define PIN_PD23__RF1 PINMUX_PIN(PIN_PD23, 4, 2)
++#define PIN_PD23__ISC_MCK PINMUX_PIN(PIN_PD23, 5, 2)
++#define PIN_PD23__CANRX5 PINMUX_PIN(PIN_PD23, 6, 2)
++#define PIN_PD23__G1_TX1 PINMUX_PIN(PIN_PD23, 7, 1)
++#define PIN_PD24 120
++#define PIN_PD24__GPIO PINMUX_PIN(PIN_PD24, 0, 0)
++#define PIN_PD24__PDMC0_DS1 PINMUX_PIN(PIN_PD24, 1, 2)
++#define PIN_PD24__PWMFI0 PINMUX_PIN(PIN_PD24, 3, 4)
++#define PIN_PD24__RK1 PINMUX_PIN(PIN_PD24, 4, 2)
++#define PIN_PD24__ISC_D0 PINMUX_PIN(PIN_PD24, 5, 2)
++#define PIN_PD24__G1_RXDV PINMUX_PIN(PIN_PD24, 7, 1)
++#define PIN_PD25 121
++#define PIN_PD25__GPIO PINMUX_PIN(PIN_PD25, 0, 0)
++#define PIN_PD25__PDMC1_CLK PINMUX_PIN(PIN_PD25, 1, 2)
++#define PIN_PD25__FLEXCOM5_IO0 PINMUX_PIN(PIN_PD25, 2, 2)
++#define PIN_PD25__PWMFI1 PINMUX_PIN(PIN_PD25, 3, 4)
++#define PIN_PD25__TD1 PINMUX_PIN(PIN_PD25, 4, 2)
++#define PIN_PD25__ISC_D1 PINMUX_PIN(PIN_PD25, 5, 2)
++#define PIN_PD25__G1_RX0 PINMUX_PIN(PIN_PD25, 7, 1)
++#define PIN_PD26 122
++#define PIN_PD26__GPIO PINMUX_PIN(PIN_PD26, 0, 0)
++#define PIN_PD26__PDMC1_DS0 PINMUX_PIN(PIN_PD26, 1, 2)
++#define PIN_PD26__FLEXCOM5_IO1 PINMUX_PIN(PIN_PD26, 2, 2)
++#define PIN_PD26__ADTRG PINMUX_PIN(PIN_PD26, 3, 3)
++#define PIN_PD26__TF1 PINMUX_PIN(PIN_PD26, 4, 2)
++#define PIN_PD26__ISC_D2 PINMUX_PIN(PIN_PD26, 5, 2)
++#define PIN_PD26__G1_RX1 PINMUX_PIN(PIN_PD26, 7, 1)
++#define PIN_PD27 123
++#define PIN_PD27__GPIO PINMUX_PIN(PIN_PD27, 0, 0)
++#define PIN_PD27__PDMC1_DS1 PINMUX_PIN(PIN_PD27, 1, 2)
++#define PIN_PD27__FLEXCOM5_IO2 PINMUX_PIN(PIN_PD27, 2, 2)
++#define PIN_PD27__TIOA0 PINMUX_PIN(PIN_PD27, 3, 3)
++#define PIN_PD27__TK1 PINMUX_PIN(PIN_PD27, 4, 2)
++#define PIN_PD27__ISC_D3 PINMUX_PIN(PIN_PD27, 5, 2)
++#define PIN_PD27__G1_RXER PINMUX_PIN(PIN_PD27, 7, 1)
++#define PIN_PD28 124
++#define PIN_PD28__GPIO PINMUX_PIN(PIN_PD28, 0, 0)
++#define PIN_PD28__RD0 PINMUX_PIN(PIN_PD28, 1, 2)
++#define PIN_PD28__FLEXCOM5_IO3 PINMUX_PIN(PIN_PD28, 2, 2)
++#define PIN_PD28__TIOB0 PINMUX_PIN(PIN_PD28, 3, 3)
++#define PIN_PD28__I2SMCC1_CK PINMUX_PIN(PIN_PD28, 4, 2)
++#define PIN_PD28__ISC_D4 PINMUX_PIN(PIN_PD28, 5, 2)
++#define PIN_PD28__PWML3 PINMUX_PIN(PIN_PD28, 6, 5)
++#define PIN_PD28__G1_MDC PINMUX_PIN(PIN_PD28, 7, 1)
++#define PIN_PD29 125
++#define PIN_PD29__GPIO PINMUX_PIN(PIN_PD29, 0, 0)
++#define PIN_PD29__RF0 PINMUX_PIN(PIN_PD29, 1, 2)
++#define PIN_PD29__FLEXCOM5_IO4 PINMUX_PIN(PIN_PD29, 2, 2)
++#define PIN_PD29__TCLK0 PINMUX_PIN(PIN_PD29, 3, 3)
++#define PIN_PD29__I2SMCC1_WS PINMUX_PIN(PIN_PD29, 4, 2)
++#define PIN_PD29__ISC_D5 PINMUX_PIN(PIN_PD29, 5, 2)
++#define PIN_PD29__PWMH3 PINMUX_PIN(PIN_PD29, 6, 5)
++#define PIN_PD29__G1_MDIO PINMUX_PIN(PIN_PD29, 7, 1)
++#define PIN_PD30 126
++#define PIN_PD30__GPIO PINMUX_PIN(PIN_PD30, 0, 0)
++#define PIN_PD30__RK0 PINMUX_PIN(PIN_PD30, 1, 2)
++#define PIN_PD30__FLEXCOM6_IO0 PINMUX_PIN(PIN_PD30, 2, 2)
++#define PIN_PD30__TIOA1 PINMUX_PIN(PIN_PD30, 3, 3)
++#define PIN_PD30__I2SMCC1_MCK PINMUX_PIN(PIN_PD30, 4, 2)
++#define PIN_PD30__ISC_D6 PINMUX_PIN(PIN_PD30, 5, 2)
++#define PIN_PD30__PWMEXTRG0 PINMUX_PIN(PIN_PD30, 6, 5)
++#define PIN_PD30__G1_TXCK PINMUX_PIN(PIN_PD30, 7, 1)
++#define PIN_PD31 127
++#define PIN_PD31__GPIO PINMUX_PIN(PIN_PD31, 0, 0)
++#define PIN_PD31__TD0 PINMUX_PIN(PIN_PD31, 1, 2)
++#define PIN_PD31__FLEXCOM6_IO1 PINMUX_PIN(PIN_PD31, 2, 2)
++#define PIN_PD31__TIOB1 PINMUX_PIN(PIN_PD31, 3, 3)
++#define PIN_PD31__I2SMCC1_DOUT0 PINMUX_PIN(PIN_PD31, 4, 2)
++#define PIN_PD31__ISC_D7 PINMUX_PIN(PIN_PD31, 5, 2)
++#define PIN_PD31__PWM_EXTRG1 PINMUX_PIN(PIN_PD31, 6, 5)
++#define PIN_PD31__G1_TX2 PINMUX_PIN(PIN_PD31, 7, 1)
++#define PIN_PE0 128
++#define PIN_PE0__GPIO PINMUX_PIN(PIN_PE0, 0, 0)
++#define PIN_PE0__TF0 PINMUX_PIN(PIN_PE0, 1, 2)
++#define PIN_PE0__FLEXCOM6_IO2 PINMUX_PIN(PIN_PE0, 2, 2)
++#define PIN_PE0__TCLK1 PINMUX_PIN(PIN_PE0, 3, 3)
++#define PIN_PE0__I2SMCC1_DOUT1 PINMUX_PIN(PIN_PE0, 4, 2)
++#define PIN_PE0__ISC_HSYNC PINMUX_PIN(PIN_PE0, 5, 2)
++#define PIN_PE0__PWMFI0 PINMUX_PIN(PIN_PE0, 6, 5)
++#define PIN_PE0__G1_TX3 PINMUX_PIN(PIN_PE0, 7, 1)
++#define PIN_PE1 129
++#define PIN_PE1__GPIO PINMUX_PIN(PIN_PE1, 0, 0)
++#define PIN_PE1__TK0 PINMUX_PIN(PIN_PE1, 1, 2)
++#define PIN_PE1__FLEXCOM6_IO3 PINMUX_PIN(PIN_PE1, 2, 2)
++#define PIN_PE1__TIOA2 PINMUX_PIN(PIN_PE1, 3, 3)
++#define PIN_PE1__I2SMCC1_DOUT2 PINMUX_PIN(PIN_PE1, 4, 2)
++#define PIN_PE1__ISC_VSYNC PINMUX_PIN(PIN_PE1, 5, 2)
++#define PIN_PE1__PWMFI1 PINMUX_PIN(PIN_PE1, 6, 5)
++#define PIN_PE1__G1_RX2 PINMUX_PIN(PIN_PE1, 7, 1)
++#define PIN_PE2 130
++#define PIN_PE2__GPIO PINMUX_PIN(PIN_PE2, 0, 0)
++#define PIN_PE2__PWML0 PINMUX_PIN(PIN_PE2, 1, 5)
++#define PIN_PE2__FLEXCOM6_IO4 PINMUX_PIN(PIN_PE2, 2, 2)
++#define PIN_PE2__TIOB2 PINMUX_PIN(PIN_PE2, 3, 3)
++#define PIN_PE2__I2SMCC1_DOUT3 PINMUX_PIN(PIN_PE2, 4, 2)
++#define PIN_PE2__ISC_FIELD PINMUX_PIN(PIN_PE2, 5, 2)
++#define PIN_PE2__G1_RX3 PINMUX_PIN(PIN_PE2, 7, 1)
++#define PIN_PE3 131
++#define PIN_PE3__GPIO PINMUX_PIN(PIN_PE3, 0, 0)
++#define PIN_PE3__PWMH0 PINMUX_PIN(PIN_PE3, 1, 5)
++#define PIN_PE3__FLEXCOM0_IO0 PINMUX_PIN(PIN_PE3, 2, 4)
++#define PIN_PE3__TCLK2 PINMUX_PIN(PIN_PE3, 3, 3)
++#define PIN_PE3__I2SMCC1_DIN0 PINMUX_PIN(PIN_PE3, 4, 2)
++#define PIN_PE3__ISC_PCK PINMUX_PIN(PIN_PE3, 5, 2)
++#define PIN_PE3__G1_RXCK PINMUX_PIN(PIN_PE3, 7, 1)
++#define PIN_PE4 132
++#define PIN_PE4__GPIO PINMUX_PIN(PIN_PE4, 0, 0)
++#define PIN_PE4__PWML1 PINMUX_PIN(PIN_PE4, 1, 5)
++#define PIN_PE4__FLEXCOM0_IO1 PINMUX_PIN(PIN_PE4, 2, 4)
++#define PIN_PE4__TIOA3 PINMUX_PIN(PIN_PE4, 3, 3)
++#define PIN_PE4__I2SMCC1_DIN1 PINMUX_PIN(PIN_PE4, 4, 2)
++#define PIN_PE4__ISC_D8 PINMUX_PIN(PIN_PE4, 5, 2)
++#define PIN_PE4__G1_TXER PINMUX_PIN(PIN_PE4, 7, 1)
++#define PIN_PE5 133
++#define PIN_PE5__GPIO PINMUX_PIN(PIN_PE5, 0, 0)
++#define PIN_PE5__PWMH1 PINMUX_PIN(PIN_PE5, 1, 5)
++#define PIN_PE5__FLEXCOM0_IO2 PINMUX_PIN(PIN_PE5, 2, 4)
++#define PIN_PE5__TIOB3 PINMUX_PIN(PIN_PE5, 3, 3)
++#define PIN_PE5__I2SMCC1_DIN2 PINMUX_PIN(PIN_PE5, 4, 2)
++#define PIN_PE5__ISC_D9 PINMUX_PIN(PIN_PE5, 5, 2)
++#define PIN_PE5__G1_COL PINMUX_PIN(PIN_PE5, 7, 1)
++#define PIN_PE6 134
++#define PIN_PE6__GPIO PINMUX_PIN(PIN_PE6, 0, 0)
++#define PIN_PE6__PWML2 PINMUX_PIN(PIN_PE6, 1, 5)
++#define PIN_PE6__FLEXCOM0_IO3 PINMUX_PIN(PIN_PE6, 2, 4)
++#define PIN_PE6__TCLK3 PINMUX_PIN(PIN_PE6, 3, 3)
++#define PIN_PE6__I2SMCC1_DIN3 PINMUX_PIN(PIN_PE6, 4, 2)
++#define PIN_PE6__ISC_D10 PINMUX_PIN(PIN_PE6, 5, 2)
++#define PIN_PE6__G1_CRS PINMUX_PIN(PIN_PE6, 7, 1)
++#define PIN_PE7 135
++#define PIN_PE7__GPIO PINMUX_PIN(PIN_PE7, 0, 0)
++#define PIN_PE7__PWMH2 PINMUX_PIN(PIN_PE7, 1, 5)
++#define PIN_PE7__FLEXCOM0_IO4 PINMUX_PIN(PIN_PE7, 2, 4)
++#define PIN_PE7__TIOA4 PINMUX_PIN(PIN_PE7, 3, 3)
++#define PIN_PE7__ISC_D11 PINMUX_PIN(PIN_PE7, 5, 2)
++#define PIN_PE7__G1_TSUCOMP PINMUX_PIN(PIN_PE7, 7, 1)
+diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
+new file mode 100644
+index 000000000000..cc6be6db7b80
+--- /dev/null
++++ b/arch/arm/boot/dts/sama7g5.dtsi
+@@ -0,0 +1,528 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * sama7g5.dtsi - Device Tree Include file for SAMA7G5 family SoC
++ *
++ * Copyright (C) 2020 Microchip Technology, Inc. and its subsidiaries
++ *
++ * Author: Eugen Hristev <eugen.hristev@microchip.com>
++ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
++ *
++ */
++
++#include <dt-bindings/interrupt-controller/irq.h>
++#include <dt-bindings/interrupt-controller/arm-gic.h>
++#include <dt-bindings/clock/at91.h>
++#include <dt-bindings/dma/at91.h>
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++ model = "Microchip SAMA7G5 family SoC";
++ compatible = "microchip,sama7g5";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ interrupt-parent = <&gic>;
++
++ cpus {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ cpu0: cpu@0 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a7";
++ reg = <0x0>;
++ };
++ };
++
++ clocks {
++ slow_xtal: slow_xtal {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ };
++
++ main_xtal: main_xtal {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ };
++
++ usb_clk: usb_clk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <48000000>;
++ };
++ };
++
++ vddout25: fixed-regulator-vddout25 {
++ compatible = "regulator-fixed";
++
++ regulator-name = "VDDOUT25";
++ regulator-min-microvolt = <2500000>;
++ regulator-max-microvolt = <2500000>;
++ regulator-boot-on;
++ status = "disabled";
++ };
++
++ ns_sram: sram@100000 {
++ compatible = "mmio-sram";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ reg = <0x100000 0x20000>;
++ ranges;
++ };
++
++ soc {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges;
++
++ secumod: secumod@e0004000 {
++ compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
++ reg = <0xe0004000 0x4000>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ };
++
++ sfrbu: sfr@e0008000 {
++ compatible = "microchip,sama7g5-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
++ reg = <0xe0008000 0x20>;
++ };
++
++ pioA: pinctrl@e0014000 {
++ compatible = "microchip,sama7g5-pinctrl";
++ reg = <0xe0014000 0x800>;
++ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
++ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ gpio-controller;
++ #gpio-cells = <2>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
++ };
++
++ pmc: pmc@e0018000 {
++ compatible = "microchip,sama7g5-pmc", "syscon";
++ reg = <0xe0018000 0x200>;
++ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
++ #clock-cells = <2>;
++ clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
++ clock-names = "td_slck", "md_slck", "main_xtal";
++ };
++
++ rtt: rtt@e001d020 {
++ compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
++ reg = <0xe001d020 0x30>;
++ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clk32k 0>;
++ };
++
++ clk32k: clock-controller@e001d050 {
++ compatible = "microchip,sama7g5-sckc", "microchip,sam9x60-sckc";
++ reg = <0xe001d050 0x4>;
++ clocks = <&slow_xtal>;
++ #clock-cells = <1>;
++ };
++
++ gpbr: gpbr@e001d060 {
++ compatible = "microchip,sama7g5-gpbr", "syscon";
++ reg = <0xe001d060 0x48>;
++ };
++
++ ps_wdt: watchdog@e001d180 {
++ compatible = "microchip,sama7g5-wdt";
++ reg = <0xe001d180 0x24>;
++ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&clk32k 0>;
++ };
++
++ sdmmc0: mmc@e1204000 {
++ compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
++ reg = <0xe1204000 0x4000>;
++ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 80>, <&pmc PMC_TYPE_GCK 80>;
++ clock-names = "hclock", "multclk";
++ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
++ assigned-clocks = <&pmc PMC_TYPE_GCK 80>;
++ assigned-clock-rates = <200000000>;
++ microchip,sdcal-inverted;
++ status = "disabled";
++ };
++
++ sdmmc1: mmc@e1208000 {
++ compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
++ reg = <0xe1208000 0x4000>;
++ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 81>, <&pmc PMC_TYPE_GCK 81>;
++ clock-names = "hclock", "multclk";
++ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
++ assigned-clocks = <&pmc PMC_TYPE_GCK 81>;
++ assigned-clock-rates = <200000000>;
++ microchip,sdcal-inverted;
++ status = "disabled";
++ };
++
++ sdmmc2: mmc@e120c000 {
++ compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
++ reg = <0xe120c000 0x4000>;
++ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 82>, <&pmc PMC_TYPE_GCK 82>;
++ clock-names = "hclock", "multclk";
++ assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_SYSPLL>;
++ assigned-clocks = <&pmc PMC_TYPE_GCK 82>;
++ assigned-clock-rates = <200000000>;
++ microchip,sdcal-inverted;
++ status = "disabled";
++ };
++
++ pwm: pwm@e1604000 {
++ compatible = "microchip,sama7g5-pwm", "atmel,sama5d2-pwm";
++ reg = <0xe1604000 0x4000>;
++ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
++ #pwm-cells = <3>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 77>;
++ status = "disabled";
++ };
++
++ spdifrx: spdifrx@e1614000 {
++ #sound-dai-cells = <0>;
++ compatible = "microchip,sama7g5-spdifrx";
++ reg = <0xe1614000 0x4000>;
++ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
++ dmas = <&dma0 AT91_XDMAC_DT_PERID(49)>;
++ dma-names = "rx";
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 84>, <&pmc PMC_TYPE_GCK 84>;
++ clock-names = "pclk", "gclk";
++ status = "disabled";
++ };
++
++ spdiftx: spdiftx@e1618000 {
++ #sound-dai-cells = <0>;
++ compatible = "microchip,sama7g5-spdiftx";
++ reg = <0xe1618000 0x4000>;
++ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
++ dmas = <&dma0 AT91_XDMAC_DT_PERID(50)>;
++ dma-names = "tx";
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 85>, <&pmc PMC_TYPE_GCK 85>;
++ clock-names = "pclk", "gclk";
++ };
++
++ i2s0: i2s@e161c000 {
++ compatible = "microchip,sama7g5-i2smcc";
++ #sound-dai-cells = <0>;
++ reg = <0xe161c000 0x4000>;
++ interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
++ dmas = <&dma0 AT91_XDMAC_DT_PERID(34)>, <&dma0 AT91_XDMAC_DT_PERID(33)>;
++ dma-names = "tx", "rx";
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
++ clock-names = "pclk", "gclk";
++ status = "disabled";
++ };
++
++ i2s1: i2s@e1620000 {
++ compatible = "microchip,sama7g5-i2smcc";
++ #sound-dai-cells = <0>;
++ reg = <0xe1620000 0x4000>;
++ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
++ dmas = <&dma0 AT91_XDMAC_DT_PERID(36)>, <&dma0 AT91_XDMAC_DT_PERID(35)>;
++ dma-names = "tx", "rx";
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
++ clock-names = "pclk", "gclk";
++ status = "disabled";
++ };
++
++ pit64b0: timer@e1800000 {
++ compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
++ reg = <0xe1800000 0x4000>;
++ interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 70>, <&pmc PMC_TYPE_GCK 70>;
++ clock-names = "pclk", "gclk";
++ };
++
++ pit64b1: timer@e1804000 {
++ compatible = "microchip,sama7g5-pit64b", "microchip,sam9x60-pit64b";
++ reg = <0xe1804000 0x4000>;
++ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 71>, <&pmc PMC_TYPE_GCK 71>;
++ clock-names = "pclk", "gclk";
++ };
++
++ flx0: flexcom@e1818000 {
++ compatible = "atmel,sama5d2-flexcom";
++ reg = <0xe1818000 0x200>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0xe1818000 0x800>;
++ status = "disabled";
++
++ uart0: serial@200 {
++ compatible = "atmel,at91sam9260-usart";
++ reg = <0x200 0x200>;
++ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
++ clock-names = "usart";
++ dmas = <&dma1 AT91_XDMAC_DT_PERID(6)>,
++ <&dma1 AT91_XDMAC_DT_PERID(5)>;
++ dma-names = "tx", "rx";
++ atmel,use-dma-rx;
++ atmel,use-dma-tx;
++ status = "disabled";
++ };
++ };
++
++ flx1: flexcom@e181c000 {
++ compatible = "atmel,sama5d2-flexcom";
++ reg = <0xe181c000 0x200>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0xe181c000 0x800>;
++ status = "disabled";
++
++ i2c1: i2c@600 {
++ compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
++ reg = <0x600 0x200>;
++ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
++ atmel,fifo-size = <32>;
++ dmas = <&dma0 AT91_XDMAC_DT_PERID(7)>,
++ <&dma0 AT91_XDMAC_DT_PERID(8)>;
++ dma-names = "rx", "tx";
++ atmel,use-dma-rx;
++ atmel,use-dma-tx;
++ status = "disabled";
++ };
++ };
++
++ flx3: flexcom@e1824000 {
++ compatible = "atmel,sama5d2-flexcom";
++ reg = <0xe1824000 0x200>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0xe1824000 0x800>;
++ status = "disabled";
++
++ uart3: serial@200 {
++ compatible = "atmel,at91sam9260-usart";
++ reg = <0x200 0x200>;
++ interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
++ clock-names = "usart";
++ dmas = <&dma1 AT91_XDMAC_DT_PERID(12)>,
++ <&dma1 AT91_XDMAC_DT_PERID(11)>;
++ dma-names = "tx", "rx";
++ atmel,use-dma-rx;
++ atmel,use-dma-tx;
++ status = "disabled";
++ };
++ };
++
++ trng: rng@e2010000 {
++ compatible = "microchip,sama7g5-trng", "atmel,at91sam9g45-trng";
++ reg = <0xe2010000 0x100>;
++ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 97>;
++ status = "disabled";
++ };
++
++ flx4: flexcom@e2018000 {
++ compatible = "atmel,sama5d2-flexcom";
++ reg = <0xe2018000 0x200>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0xe2018000 0x800>;
++ status = "disabled";
++
++ uart4: serial@200 {
++ compatible = "atmel,at91sam9260-usart";
++ reg = <0x200 0x200>;
++ interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
++ clock-names = "usart";
++ dmas = <&dma1 AT91_XDMAC_DT_PERID(14)>,
++ <&dma1 AT91_XDMAC_DT_PERID(13)>;
++ dma-names = "tx", "rx";
++ atmel,use-dma-rx;
++ atmel,use-dma-tx;
++ atmel,fifo-size = <16>;
++ status = "disabled";
++ };
++ };
++
++ flx7: flexcom@e2024000 {
++ compatible = "atmel,sama5d2-flexcom";
++ reg = <0xe2024000 0x200>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0xe2024000 0x800>;
++ status = "disabled";
++
++ uart7: serial@200 {
++ compatible = "atmel,at91sam9260-usart";
++ reg = <0x200 0x200>;
++ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
++ clock-names = "usart";
++ dmas = <&dma1 AT91_XDMAC_DT_PERID(20)>,
++ <&dma1 AT91_XDMAC_DT_PERID(19)>;
++ dma-names = "tx", "rx";
++ atmel,use-dma-rx;
++ atmel,use-dma-tx;
++ atmel,fifo-size = <16>;
++ status = "disabled";
++ };
++ };
++
++ gmac0: ethernet@e2800000 {
++ compatible = "microchip,sama7g5-gem";
++ reg = <0xe2800000 0x1000>;
++ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH
++ GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH
++ GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH
++ GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH
++ GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH
++ GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_PERIPHERAL 51>, <&pmc PMC_TYPE_GCK 51>, <&pmc PMC_TYPE_GCK 53>;
++ clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
++ assigned-clocks = <&pmc PMC_TYPE_GCK 51>;
++ assigned-clock-rates = <125000000>;
++ status = "disabled";
++ };
++
++ gmac1: ethernet@e2804000 {
++ compatible = "microchip,sama7g5-emac";
++ reg = <0xe2804000 0x1000>;
++ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH
++ GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 52>, <&pmc PMC_TYPE_PERIPHERAL 52>;
++ clock-names = "pclk", "hclk";
++ status = "disabled";
++ };
++
++ dma0: dma-controller@e2808000 {
++ compatible = "microchip,sama7g5-dma";
++ reg = <0xe2808000 0x1000>;
++ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
++ #dma-cells = <1>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
++ clock-names = "dma_clk";
++ status = "disabled";
++ };
++
++ dma1: dma-controller@e280c000 {
++ compatible = "microchip,sama7g5-dma";
++ reg = <0xe280c000 0x1000>;
++ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
++ #dma-cells = <1>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
++ clock-names = "dma_clk";
++ status = "disabled";
++ };
++
++ /* Place dma2 here despite it's address */
++ dma2: dma-controller@e1200000 {
++ compatible = "microchip,sama7g5-dma";
++ reg = <0xe1200000 0x1000>;
++ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
++ #dma-cells = <1>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
++ clock-names = "dma_clk";
++ dma-requests = <0>;
++ status = "disabled";
++ };
++
++ flx8: flexcom@e2818000 {
++ compatible = "atmel,sama5d2-flexcom";
++ reg = <0xe2818000 0x200>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0xe2818000 0x800>;
++ status = "disabled";
++
++ i2c8: i2c@600 {
++ compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
++ reg = <0x600 0x200>;
++ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 46>;
++ atmel,fifo-size = <32>;
++ dmas = <&dma0 AT91_XDMAC_DT_PERID(21)>,
++ <&dma0 AT91_XDMAC_DT_PERID(22)>;
++ dma-names = "rx", "tx";
++ atmel,use-dma-rx;
++ atmel,use-dma-tx;
++ status = "disabled";
++ };
++ };
++
++ flx9: flexcom@e281c000 {
++ compatible = "atmel,sama5d2-flexcom";
++ reg = <0xe281c000 0x200>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0xe281c000 0x800>;
++ status = "disabled";
++
++ i2c9: i2c@600 {
++ compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
++ reg = <0x600 0x200>;
++ interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
++ atmel,fifo-size = <32>;
++ dmas = <&dma0 AT91_XDMAC_DT_PERID(23)>,
++ <&dma0 AT91_XDMAC_DT_PERID(24)>;
++ dma-names = "rx", "tx";
++ atmel,use-dma-rx;
++ atmel,use-dma-tx;
++ status = "disabled";
++ };
++ };
++
++ flx11: flexcom@e2824000 {
++ compatible = "atmel,sama5d2-flexcom";
++ reg = <0xe2824000 0x200>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0x0 0xe2824000 0x800>;
++ status = "disabled";
++
++ spi11: spi@400 {
++ compatible = "atmel,at91rm9200-spi";
++ reg = <0x400 0x200>;
++ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 49>;
++ clock-names = "spi_clk";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ atmel,fifo-size = <32>;
++ dmas = <&dma0 AT91_XDMAC_DT_PERID(27)>,
++ <&dma0 AT91_XDMAC_DT_PERID(28)>;
++ dma-names = "rx", "tx";
++ status = "disabled";
++ };
++ };
++
++ gic: interrupt-controller@e8c11000 {
++ compatible = "arm,cortex-a7-gic";
++ #interrupt-cells = <3>;
++ #address-cells = <0>;
++ interrupt-controller;
++ interrupt-parent;
++ reg = <0xe8c11000 0x1000>,
++ <0xe8c12000 0x2000>;
++ };
++ };
++};
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/223-ARM-at91-pm-do-not-panic-if-ram-controllers-are-not-.patch b/target/linux/at91/patches-5.10/223-ARM-at91-pm-do-not-panic-if-ram-controllers-are-not-.patch
new file mode 100644
index 0000000000..302d0e3752
--- /dev/null
+++ b/target/linux/at91/patches-5.10/223-ARM-at91-pm-do-not-panic-if-ram-controllers-are-not-.patch
@@ -0,0 +1,79 @@
+From 76dbc56ad65350d78d12bd9b36b00c36fb27addf Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 23 Aug 2021 16:19:12 +0300
+Subject: [PATCH 223/247] ARM: at91: pm: do not panic if ram controllers are
+ not enabled
+
+In case PM is enabled but there is no RAM controller information
+in DT the code will panic. Avoid such scenarios by not initializing
+platform specific PM code in case RAM controller is not provided
+via DT.
+
+Reported-by: Eugen Hristev <eugen.hristev@microchip.com>
+Fixes: 827de1f123ba0 ("ARM: at91: remove at91_dt_initialize and machine init_early()")
+Fixes: 892e1f4a3ae58 ("ARM: at91: pm: add sama7g5 ddr phy controller")
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210823131915.23857-2-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.c | 22 ++++++++++++++++------
+ 1 file changed, 16 insertions(+), 6 deletions(-)
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index a07e14d89ba4..d92afca64b49 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -589,7 +589,7 @@ static const struct of_device_id ramc_phy_ids[] __initconst = {
+ { /* Sentinel. */ },
+ };
+
+-static __init void at91_dt_ramc(bool phy_mandatory)
++static __init int at91_dt_ramc(bool phy_mandatory)
+ {
+ struct device_node *np;
+ const struct of_device_id *of_id;
+@@ -625,12 +625,18 @@ static __init void at91_dt_ramc(bool phy_mandatory)
+ /* Lookup for DDR PHY node, if any. */
+ for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) {
+ soc_pm.data.ramc_phy = of_iomap(np, 0);
+- if (!soc_pm.data.ramc_phy)
+- panic(pr_fmt("unable to map ramc phy cpu registers\n"));
++ if (!soc_pm.data.ramc_phy) {
++ pr_err("unable to map ramc phy cpu registers\n");
++ ret = -ENOMEM;
++ goto unmap_ramc;
++ }
+ }
+
+- if (phy_mandatory && !soc_pm.data.ramc_phy)
+- panic(pr_fmt("DDR PHY is mandatory!\n"));
++ if (phy_mandatory && !soc_pm.data.ramc_phy) {
++ pr_err("DDR PHY is mandatory!\n");
++ ret = -ENODEV;
++ goto unmap_ramc;
++ }
+
+ if (!standby) {
+ pr_warn("ramc no standby function available\n");
+@@ -1163,13 +1169,17 @@ void __init sama7_pm_init(void)
+ [AT91_PM_BACKUP] = AT91_PM_IOMAP(SFRBU) |
+ AT91_PM_IOMAP(SHDWC),
+ };
++ int ret;
+
+ if (!IS_ENABLED(CONFIG_SOC_SAMA7))
+ return;
+
+ at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+
+- at91_dt_ramc(true);
++ ret = at91_dt_ramc(true);
++ if (ret)
++ return;
++
+ at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
+ at91_pm_init(NULL);
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/224-ARM-dts-at91-sama7g5-add-ram-controllers.patch b/target/linux/at91/patches-5.10/224-ARM-dts-at91-sama7g5-add-ram-controllers.patch
new file mode 100644
index 0000000000..3c36a41fbd
--- /dev/null
+++ b/target/linux/at91/patches-5.10/224-ARM-dts-at91-sama7g5-add-ram-controllers.patch
@@ -0,0 +1,41 @@
+From cf96a88e44f1fde9f1a30ab335329ff9e895e6f8 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 23 Aug 2021 16:19:13 +0300
+Subject: [PATCH 224/247] ARM: dts: at91: sama7g5: add ram controllers
+
+Add RAM and RAMC PHY controllers. These are necessary for platform
+specific power management code.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210823131915.23857-3-claudiu.beznea@microchip.com
+---
+ arch/arm/boot/dts/sama7g5.dtsi | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
+index cc6be6db7b80..ecabab4343b6 100644
+--- a/arch/arm/boot/dts/sama7g5.dtsi
++++ b/arch/arm/boot/dts/sama7g5.dtsi
+@@ -515,6 +515,18 @@ spi11: spi@400 {
+ };
+ };
+
++ uddrc: uddrc@e3800000 {
++ compatible = "microchip,sama7g5-uddrc";
++ reg = <0xe3800000 0x4000>;
++ status = "okay";
++ };
++
++ ddr3phy: ddr3phy@e3804000 {
++ compatible = "microchip,sama7g5-ddr3phy";
++ reg = <0xe3804000 0x1000>;
++ status = "okay";
++ };
++
+ gic: interrupt-controller@e8c11000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/225-ARM-dts-at91-sama7g5-add-securam-node.patch b/target/linux/at91/patches-5.10/225-ARM-dts-at91-sama7g5-add-securam-node.patch
new file mode 100644
index 0000000000..ec1c2abbab
--- /dev/null
+++ b/target/linux/at91/patches-5.10/225-ARM-dts-at91-sama7g5-add-securam-node.patch
@@ -0,0 +1,39 @@
+From 1da1aae0b207d6a5ac7c3070b8d7c6ef61a32d71 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 23 Aug 2021 16:19:14 +0300
+Subject: [PATCH 225/247] ARM: dts: at91: sama7g5: add securam node
+
+Add securam node.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210823131915.23857-4-claudiu.beznea@microchip.com
+---
+ arch/arm/boot/dts/sama7g5.dtsi | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
+index ecabab4343b6..3a4315ac0eb0 100644
+--- a/arch/arm/boot/dts/sama7g5.dtsi
++++ b/arch/arm/boot/dts/sama7g5.dtsi
+@@ -75,6 +75,17 @@ soc {
+ #size-cells = <1>;
+ ranges;
+
++ securam: securam@e0000000 {
++ compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
++ reg = <0xe0000000 0x4000>;
++ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ ranges = <0 0xe0000000 0x4000>;
++ no-memory-wc;
++ status = "okay";
++ };
++
+ secumod: secumod@e0004000 {
+ compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
+ reg = <0xe0004000 0x4000>;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/226-ARM-dts-at91-sama7g5-add-shdwc-node.patch b/target/linux/at91/patches-5.10/226-ARM-dts-at91-sama7g5-add-shdwc-node.patch
new file mode 100644
index 0000000000..a149680ad5
--- /dev/null
+++ b/target/linux/at91/patches-5.10/226-ARM-dts-at91-sama7g5-add-shdwc-node.patch
@@ -0,0 +1,60 @@
+From 372fa27d07f66f97a4bf45621c1b840ce8417a85 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 23 Aug 2021 16:19:15 +0300
+Subject: [PATCH 226/247] ARM: dts: at91: sama7g5: add shdwc node
+
+Add shutdown controller node and enable it.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210823131915.23857-5-claudiu.beznea@microchip.com
+---
+ arch/arm/boot/dts/at91-sama7g5ek.dts | 9 +++++++++
+ arch/arm/boot/dts/sama7g5.dtsi | 11 +++++++++++
+ 2 files changed, 20 insertions(+)
+
+diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
+index 4cbed98cc2f4..8b13b031a167 100644
+--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
++++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
+@@ -634,6 +634,15 @@ &sdmmc2 {
+ pinctrl-0 = <&pinctrl_sdmmc2_default>;
+ };
+
++&shdwc {
++ atmel,shdwc-debouncer = <976>;
++ status = "okay";
++
++ input@0 {
++ reg = <0>;
++ };
++};
++
+ &spdifrx {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdifrx_default>;
+diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
+index 3a4315ac0eb0..e50806cf7660 100644
+--- a/arch/arm/boot/dts/sama7g5.dtsi
++++ b/arch/arm/boot/dts/sama7g5.dtsi
+@@ -122,6 +122,17 @@ pmc: pmc@e0018000 {
+ clock-names = "td_slck", "md_slck", "main_xtal";
+ };
+
++ shdwc: shdwc@e001d010 {
++ compatible = "microchip,sama7g5-shdwc", "syscon";
++ reg = <0xe001d010 0x10>;
++ clocks = <&clk32k 0>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ atmel,wakeup-rtc-timer;
++ atmel,wakeup-rtt-timer;
++ status = "disabled";
++ };
++
+ rtt: rtt@e001d020 {
+ compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
+ reg = <0xe001d020 0x30>;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/227-ARM-dts-at91-sama7g5-add-chipid.patch b/target/linux/at91/patches-5.10/227-ARM-dts-at91-sama7g5-add-chipid.patch
new file mode 100644
index 0000000000..53530a537b
--- /dev/null
+++ b/target/linux/at91/patches-5.10/227-ARM-dts-at91-sama7g5-add-chipid.patch
@@ -0,0 +1,33 @@
+From d216c1ecf978574216ece8140146c8dc0ea400e3 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 8 Sep 2021 12:43:29 +0300
+Subject: [PATCH 227/247] ARM: dts: at91: sama7g5: add chipid
+
+Add chipid node for sama7g5.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210908094329.182477-1-claudiu.beznea@microchip.com
+---
+ arch/arm/boot/dts/sama7g5.dtsi | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi
+index e50806cf7660..6c58c151c6d9 100644
+--- a/arch/arm/boot/dts/sama7g5.dtsi
++++ b/arch/arm/boot/dts/sama7g5.dtsi
+@@ -159,6 +159,11 @@ ps_wdt: watchdog@e001d180 {
+ clocks = <&clk32k 0>;
+ };
+
++ chipid@e0020000 {
++ compatible = "microchip,sama7g5-chipid";
++ reg = <0xe0020000 0x8>;
++ };
++
+ sdmmc0: mmc@e1204000 {
+ compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
+ reg = <0xe1204000 0x4000>;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/228-ARM-at91-pm-switch-backup-area-to-vbat-in-backup-mod.patch b/target/linux/at91/patches-5.10/228-ARM-at91-pm-switch-backup-area-to-vbat-in-backup-mod.patch
new file mode 100644
index 0000000000..7a8a47fd5d
--- /dev/null
+++ b/target/linux/at91/patches-5.10/228-ARM-at91-pm-switch-backup-area-to-vbat-in-backup-mod.patch
@@ -0,0 +1,122 @@
+From 2cd84ddf0e9623c6bc723b1df368cd8b16a3a8e2 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 30 Aug 2021 13:09:27 +0300
+Subject: [PATCH 228/247] ARM: at91: pm: switch backup area to vbat in backup
+ mode
+
+Backup area is now switched to VDDIN33 at boot (with the help of
+bootloader). When switching to backup mode we need to switch backup area
+to VBAT as all the other power sources are cut off. The resuming from
+backup mode is done with the help of bootloader, so there is no need to
+do something particular in Linux to restore backup area power source.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210830100927.22711-1-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm.c | 52 +++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 52 insertions(+)
+
+diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
+index d92afca64b49..8711d6824c1f 100644
+--- a/arch/arm/mach-at91/pm.c
++++ b/arch/arm/mach-at91/pm.c
+@@ -47,12 +47,26 @@ struct at91_pm_bu {
+ unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION];
+ };
+
++/*
++ * struct at91_pm_sfrbu_offsets: registers mapping for SFRBU
++ * @pswbu: power switch BU control registers
++ */
++struct at91_pm_sfrbu_regs {
++ struct {
++ u32 key;
++ u32 ctrl;
++ u32 state;
++ u32 softsw;
++ } pswbu;
++};
++
+ /**
+ * struct at91_soc_pm - AT91 SoC power management data structure
+ * @config_shdwc_ws: wakeup sources configuration function for SHDWC
+ * @config_pmc_ws: wakeup srouces configuration function for PMC
+ * @ws_ids: wakup sources of_device_id array
+ * @data: PM data to be used on last phase of suspend
++ * @sfrbu_regs: SFRBU registers mapping
+ * @bu: backup unit mapped data (for backup mode)
+ * @memcs: memory chip select
+ */
+@@ -62,6 +76,7 @@ struct at91_soc_pm {
+ const struct of_device_id *ws_ids;
+ struct at91_pm_bu *bu;
+ struct at91_pm_data data;
++ struct at91_pm_sfrbu_regs sfrbu_regs;
+ void *memcs;
+ };
+
+@@ -356,9 +371,36 @@ static int at91_suspend_finish(unsigned long val)
+ return 0;
+ }
+
++static void at91_pm_switch_ba_to_vbat(void)
++{
++ unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
++ unsigned int val;
++
++ /* Just for safety. */
++ if (!soc_pm.data.sfrbu)
++ return;
++
++ val = readl(soc_pm.data.sfrbu + offset);
++
++ /* Already on VBAT. */
++ if (!(val & soc_pm.sfrbu_regs.pswbu.state))
++ return;
++
++ val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
++ val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
++ writel(val, soc_pm.data.sfrbu + offset);
++
++ /* Wait for update. */
++ val = readl(soc_pm.data.sfrbu + offset);
++ while (val & soc_pm.sfrbu_regs.pswbu.state)
++ val = readl(soc_pm.data.sfrbu + offset);
++}
++
+ static void at91_pm_suspend(suspend_state_t state)
+ {
+ if (soc_pm.data.mode == AT91_PM_BACKUP) {
++ at91_pm_switch_ba_to_vbat();
++
+ cpu_suspend(0, at91_suspend_finish);
+
+ /* The SRAM is lost between suspend cycles */
+@@ -1155,6 +1197,11 @@ void __init sama5d2_pm_init(void)
+ soc_pm.ws_ids = sama5d2_ws_ids;
+ soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
+ soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
++
++ soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
++ soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
++ soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
++ soc_pm.sfrbu_regs.pswbu.state = BIT(3);
+ }
+
+ void __init sama7_pm_init(void)
+@@ -1185,6 +1232,11 @@ void __init sama7_pm_init(void)
+
+ soc_pm.ws_ids = sama7g5_ws_ids;
+ soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
++
++ soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
++ soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
++ soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
++ soc_pm.sfrbu_regs.pswbu.state = BIT(2);
+ }
+
+ static int __init at91_pm_modes_select(char *str)
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/229-ARM-dts-at91-sama7g5ek-add-suspend-voltage-for-ddr3l.patch b/target/linux/at91/patches-5.10/229-ARM-dts-at91-sama7g5ek-add-suspend-voltage-for-ddr3l.patch
new file mode 100644
index 0000000000..ce412dde1c
--- /dev/null
+++ b/target/linux/at91/patches-5.10/229-ARM-dts-at91-sama7g5ek-add-suspend-voltage-for-ddr3l.patch
@@ -0,0 +1,47 @@
+From e5f87471392b344b1261d1eaf93fd44710587ea9 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 30 Sep 2021 18:42:17 +0300
+Subject: [PATCH 229/247] ARM: dts: at91: sama7g5ek: add suspend voltage for
+ ddr3l rail
+
+SAMA7G5-EK board has DDR3L type of memory soldered. This needs 1.35V. The
+1.35V for DDR3L rail at run-time is selected by the proper configuration
+on SELV2 pin (for 1.35V it needs to be in high-z state). When suspended
+the MCP16502 PMIC soldered on SAMA7G5-EK will use different sets of
+configuration registers to provide proper voltages on its rail. Run-time
+configuration registers could be configured differently than suspend
+configuration register for MCP16502 (VSEL2 affects only run-time
+configuration). In suspend states the DDR3L memory soldered on SAMA7G5-EK
+switches to self-refresh. Even on self-refresh it needs to be powered by
+a 1.35V rail. Thus, make sure the PMIC is configured properly when system
+is suspended.
+
+Fixes: 7540629e2fc7 (ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210930154219.2214051-2-claudiu.beznea@microchip.com
+---
+ arch/arm/boot/dts/at91-sama7g5ek.dts | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
+index 8b13b031a167..f0772fa01751 100644
+--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
++++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
+@@ -196,11 +196,13 @@ vddioddr: VDD_DDR {
+
+ regulator-state-standby {
+ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1350000>;
+ regulator-mode = <4>;
+ };
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1350000>;
+ regulator-mode = <4>;
+ };
+ };
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/230-ARM-at91-pm-group-constants-and-addresses-loading.patch b/target/linux/at91/patches-5.10/230-ARM-at91-pm-group-constants-and-addresses-loading.patch
new file mode 100644
index 0000000000..af6698bfeb
--- /dev/null
+++ b/target/linux/at91/patches-5.10/230-ARM-at91-pm-group-constants-and-addresses-loading.patch
@@ -0,0 +1,53 @@
+From 12330a9f6b99622e3c21ddcc720b02431b8a6e2d Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 30 Sep 2021 18:42:18 +0300
+Subject: [PATCH 230/247] ARM: at91: pm: group constants and addresses loading
+
+Group constants and addresses loading. This commit prepares the field for
+the next one.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210930154219.2214051-3-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm_suspend.S | 17 +++++++++--------
+ 1 file changed, 9 insertions(+), 8 deletions(-)
+
+diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
+index cbd61a3bcab1..34f251fdb743 100644
+--- a/arch/arm/mach-at91/pm_suspend.S
++++ b/arch/arm/mach-at91/pm_suspend.S
+@@ -1014,6 +1014,15 @@ ENTRY(at91_pm_suspend_in_sram)
+ mov tmp1, #0
+ mcr p15, 0, tmp1, c7, c10, 4
+
++ ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
++ str tmp1, .mckr_offset
++ ldr tmp1, [r0, #PM_DATA_PMC_VERSION]
++ str tmp1, .pmc_version
++ ldr tmp1, [r0, #PM_DATA_MEMCTRL]
++ str tmp1, .memtype
++ ldr tmp1, [r0, #PM_DATA_MODE]
++ str tmp1, .pm_mode
++
+ ldr tmp1, [r0, #PM_DATA_PMC]
+ str tmp1, .pmc_base
+ ldr tmp1, [r0, #PM_DATA_RAMC0]
+@@ -1022,14 +1031,6 @@ ENTRY(at91_pm_suspend_in_sram)
+ str tmp1, .sramc1_base
+ ldr tmp1, [r0, #PM_DATA_RAMC_PHY]
+ str tmp1, .sramc_phy_base
+- ldr tmp1, [r0, #PM_DATA_MEMCTRL]
+- str tmp1, .memtype
+- ldr tmp1, [r0, #PM_DATA_MODE]
+- str tmp1, .pm_mode
+- ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
+- str tmp1, .mckr_offset
+- ldr tmp1, [r0, #PM_DATA_PMC_VERSION]
+- str tmp1, .pmc_version
+ /* Both ldrne below are here to preload their address in the TLB */
+ ldr tmp1, [r0, #PM_DATA_SHDWC]
+ str tmp1, .shdwc
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch b/target/linux/at91/patches-5.10/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch
new file mode 100644
index 0000000000..86b07071a4
--- /dev/null
+++ b/target/linux/at91/patches-5.10/231-ARM-at91-pm-preload-base-address-of-controllers-in-t.patch
@@ -0,0 +1,98 @@
+From 6075bbc75e55258a762d618cd459dbe0dd38aff9 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Thu, 30 Sep 2021 18:42:19 +0300
+Subject: [PATCH 231/247] ARM: at91: pm: preload base address of controllers in
+ tlb
+
+In suspend/resume procedure for AT91 architecture different controllers
+(PMC, SHDWC, RAM, RAM PHY, SFRBU) are accessed to do the proper settings
+for power saving. Commit f0bbf17958e8 ("ARM: at91: pm: add self-refresh
+support for sama7g5") introduced the access to RAMC PHY controller for
+SAMA7G5. The access to this controller is done after RAMC ports are
+closed, thus any TLB walk necessary for RAMC PHY virtual address will
+fail. In the development branch this was not encountered. However, on
+current kernel the issue is reproducible.
+
+To solve the issue the previous mechanism of pre-loading the TLB with
+the RAMC PHY virtual address has been used. However, only the addition
+of this new pre-load breaks the functionality for ARMv5 based
+devices (SAM9X60). This behavior has been encountered previously
+while debugging this code and using the same mechanism for pre-loading
+address for different controllers (e.g. pin controller, the assumption
+being that other requested translations are replaced from TLB).
+
+To solve this new issue the TLB flush + the extension of pre-loading
+the rest of controllers to TLB (e.g. PMC, RAMC) has been added. The
+rest of the controllers should have been pre-loaded previously, anyway.
+
+Fixes: f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5")
+Depends-on: e42cbbe5c9a2 ("ARM: at91: pm: group constants and addresses loading")
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210930154219.2214051-4-claudiu.beznea@microchip.com
+---
+ arch/arm/mach-at91/pm_suspend.S | 25 ++++++++++++++++++++++++-
+ 1 file changed, 24 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
+index 34f251fdb743..fdb4f63ecde4 100644
+--- a/arch/arm/mach-at91/pm_suspend.S
++++ b/arch/arm/mach-at91/pm_suspend.S
+@@ -1014,6 +1014,10 @@ ENTRY(at91_pm_suspend_in_sram)
+ mov tmp1, #0
+ mcr p15, 0, tmp1, c7, c10, 4
+
++ /* Flush tlb. */
++ mov r4, #0
++ mcr p15, 0, r4, c8, c7, 0
++
+ ldr tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
+ str tmp1, .mckr_offset
+ ldr tmp1, [r0, #PM_DATA_PMC_VERSION]
+@@ -1023,23 +1027,42 @@ ENTRY(at91_pm_suspend_in_sram)
+ ldr tmp1, [r0, #PM_DATA_MODE]
+ str tmp1, .pm_mode
+
++ /*
++ * ldrne below are here to preload their address in the TLB as access
++ * to RAM may be limited while in self-refresh.
++ */
+ ldr tmp1, [r0, #PM_DATA_PMC]
+ str tmp1, .pmc_base
++ cmp tmp1, #0
++ ldrne tmp2, [tmp1, #0]
++
+ ldr tmp1, [r0, #PM_DATA_RAMC0]
+ str tmp1, .sramc_base
++ cmp tmp1, #0
++ ldrne tmp2, [tmp1, #0]
++
+ ldr tmp1, [r0, #PM_DATA_RAMC1]
+ str tmp1, .sramc1_base
++ cmp tmp1, #0
++ ldrne tmp2, [tmp1, #0]
++
++#ifndef CONFIG_SOC_SAM_V4_V5
++ /* ldrne below are here to preload their address in the TLB */
+ ldr tmp1, [r0, #PM_DATA_RAMC_PHY]
+ str tmp1, .sramc_phy_base
+- /* Both ldrne below are here to preload their address in the TLB */
++ cmp tmp1, #0
++ ldrne tmp2, [tmp1, #0]
++
+ ldr tmp1, [r0, #PM_DATA_SHDWC]
+ str tmp1, .shdwc
+ cmp tmp1, #0
+ ldrne tmp2, [tmp1, #0]
++
+ ldr tmp1, [r0, #PM_DATA_SFRBU]
+ str tmp1, .sfrbu
+ cmp tmp1, #0
+ ldrne tmp2, [tmp1, #0x10]
++#endif
+
+ /* Active the self-refresh mode */
+ at91_sramc_self_refresh_ena
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/232-ARM-dts-at91-sama7g5ek-use-proper-slew-rate-settings.patch b/target/linux/at91/patches-5.10/232-ARM-dts-at91-sama7g5ek-use-proper-slew-rate-settings.patch
new file mode 100644
index 0000000000..014ab46006
--- /dev/null
+++ b/target/linux/at91/patches-5.10/232-ARM-dts-at91-sama7g5ek-use-proper-slew-rate-settings.patch
@@ -0,0 +1,90 @@
+From 98d2c4ca97dde30616fa78ad5677825b1966cec6 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 15 Sep 2021 10:48:35 +0300
+Subject: [PATCH 232/247] ARM: dts: at91: sama7g5ek: use proper slew-rate
+ settings for GMACs
+
+Datasheet chapter "EMAC Timings" specifies that while in 3.3V domain
+GMAC's MDIO pins should be configured with slew-rate enabled, while the
+data + signaling pins should be configured with slew-rate disabled when
+GMAC works in RGMII or RMII modes. The pin controller for SAMA7G5 sets
+the slew-rate as enabled for all pins. Adapt the device tree to comply
+with these.
+
+Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210915074836.6574-2-claudiu.beznea@microchip.com
+---
+ arch/arm/boot/dts/at91-sama7g5ek.dts | 28 ++++++++++++++++++++++------
+ 1 file changed, 22 insertions(+), 6 deletions(-)
+
+diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
+index f0772fa01751..30b67cad5f14 100644
+--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
++++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
+@@ -355,7 +355,10 @@ &gmac0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>;
++ pinctrl-0 = <&pinctrl_gmac0_default
++ &pinctrl_gmac0_mdio_default
++ &pinctrl_gmac0_txck_default
++ &pinctrl_gmac0_phy_irq>;
+ phy-mode = "rgmii-id";
+ status = "okay";
+
+@@ -370,7 +373,9 @@ &gmac1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+- pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>;
++ pinctrl-0 = <&pinctrl_gmac1_default
++ &pinctrl_gmac1_mdio_default
++ &pinctrl_gmac1_phy_irq>;
+ phy-mode = "rmii";
+ status = "okay";
+
+@@ -425,14 +430,20 @@ pinctrl_gmac0_default: gmac0_default {
+ <PIN_PA15__G0_TXEN>,
+ <PIN_PA30__G0_RXCK>,
+ <PIN_PA18__G0_RXDV>,
+- <PIN_PA22__G0_MDC>,
+- <PIN_PA23__G0_MDIO>,
+ <PIN_PA25__G0_125CK>;
++ slew-rate = <0>;
++ bias-disable;
++ };
++
++ pinctrl_gmac0_mdio_default: gmac0_mdio_default {
++ pinmux = <PIN_PA22__G0_MDC>,
++ <PIN_PA23__G0_MDIO>;
+ bias-disable;
+ };
+
+ pinctrl_gmac0_txck_default: gmac0_txck_default {
+ pinmux = <PIN_PA24__G0_TXCK>;
++ slew-rate = <0>;
+ bias-pull-up;
+ };
+
+@@ -449,8 +460,13 @@ pinctrl_gmac1_default: gmac1_default {
+ <PIN_PD25__G1_RX0>,
+ <PIN_PD26__G1_RX1>,
+ <PIN_PD27__G1_RXER>,
+- <PIN_PD24__G1_RXDV>,
+- <PIN_PD28__G1_MDC>,
++ <PIN_PD24__G1_RXDV>;
++ slew-rate = <0>;
++ bias-disable;
++ };
++
++ pinctrl_gmac1_mdio_default: gmac1_mdio_default {
++ pinmux = <PIN_PD28__G1_MDC>,
+ <PIN_PD29__G1_MDIO>;
+ bias-disable;
+ };
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/233-ARM-dts-at91-sama7g5ek-to-not-touch-slew-rate-for-SD.patch b/target/linux/at91/patches-5.10/233-ARM-dts-at91-sama7g5ek-to-not-touch-slew-rate-for-SD.patch
new file mode 100644
index 0000000000..75b64b7b54
--- /dev/null
+++ b/target/linux/at91/patches-5.10/233-ARM-dts-at91-sama7g5ek-to-not-touch-slew-rate-for-SD.patch
@@ -0,0 +1,78 @@
+From 4c0b77276307d2cba8ae2595cbae4cc916c84c36 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 15 Sep 2021 10:48:36 +0300
+Subject: [PATCH 233/247] ARM: dts: at91: sama7g5ek: to not touch slew-rate for
+ SDMMC pins
+
+With commit c709135e576b ("pinctrl: at91-pio4: add support for slew-rate")
+and commit cbde6c823bfa ("pinctrl: at91-pio4: Fix slew rate disablement")
+the slew-rate is enabled by default for each configured pin. The datasheet
+specifies at chapter "Output Driver AC Characteristics" that HSIO
+drivers (use in SDMMCx and QSPI0 peripherals), don't have a slewrate
+setting but are rather calibrated against an external 1% resistor mounted
+on the SDMMCx_CAL or QSPI0_CAL pins. Depending on the target signal
+frequency and the external load, it is possible to adjust their target
+output impedance. Thus set slew-rate = <0> for SDMMC (QSPI is not enabled
+at the moment in device tree).
+
+Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20210915074836.6574-3-claudiu.beznea@microchip.com
+---
+ arch/arm/boot/dts/at91-sama7g5ek.dts | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
+index 30b67cad5f14..f3d6aaa3a78d 100644
+--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
++++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
+@@ -558,6 +558,7 @@ cmd_data {
+ <PIN_PA8__SDMMC0_DAT5>,
+ <PIN_PA9__SDMMC0_DAT6>,
+ <PIN_PA10__SDMMC0_DAT7>;
++ slew-rate = <0>;
+ bias-pull-up;
+ };
+
+@@ -565,6 +566,7 @@ ck_cd_rstn_vddsel {
+ pinmux = <PIN_PA0__SDMMC0_CK>,
+ <PIN_PA2__SDMMC0_RSTN>,
+ <PIN_PA11__SDMMC0_DS>;
++ slew-rate = <0>;
+ bias-pull-up;
+ };
+ };
+@@ -576,6 +578,7 @@ cmd_data {
+ <PIN_PC0__SDMMC1_DAT1>,
+ <PIN_PC1__SDMMC1_DAT2>,
+ <PIN_PC2__SDMMC1_DAT3>;
++ slew-rate = <0>;
+ bias-pull-up;
+ };
+
+@@ -584,6 +587,7 @@ ck_cd_rstn_vddsel {
+ <PIN_PB28__SDMMC1_RSTN>,
+ <PIN_PC5__SDMMC1_1V8SEL>,
+ <PIN_PC4__SDMMC1_CD>;
++ slew-rate = <0>;
+ bias-pull-up;
+ };
+ };
+@@ -595,11 +599,13 @@ cmd_data {
+ <PIN_PD6__SDMMC2_DAT1>,
+ <PIN_PD7__SDMMC2_DAT2>,
+ <PIN_PD8__SDMMC2_DAT3>;
++ slew-rate = <0>;
+ bias-pull-up;
+ };
+
+ ck {
+ pinmux = <PIN_PD4__SDMMC2_CK>;
++ slew-rate = <0>;
+ bias-pull-up;
+ };
+ };
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/234-clk-at91-re-factor-clocks-suspend-resume.patch b/target/linux/at91/patches-5.10/234-clk-at91-re-factor-clocks-suspend-resume.patch
new file mode 100644
index 0000000000..9defd65c49
--- /dev/null
+++ b/target/linux/at91/patches-5.10/234-clk-at91-re-factor-clocks-suspend-resume.patch
@@ -0,0 +1,1369 @@
+From 65bb4687b2a5c6f02f44345540c3389d6e7523e7 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:05 +0300
+Subject: [PATCH 234/247] clk: at91: re-factor clocks suspend/resume
+
+SAMA5D2 and SAMA7G5 have a special power saving mode (backup mode) where
+most of the SoC's components are powered off (including PMC). Resuming
+from this mode is done with the help of bootloader. Peripherals are not
+aware of the power saving mode thus most of them are disabling clocks in
+proper suspend API and re-enable them in resume API without taking into
+account the previously setup rate. Moreover some of the peripherals are
+acting as wakeup sources and are not disabling the clocks in this
+scenario, when suspending. Since backup mode cuts the power for
+peripherals, in resume part these clocks needs to be re-configured.
+
+The initial PMC suspend/resume code was designed only for SAMA5D2's PMC
+(as it was the only one supporting backup mode). SAMA7G supports also
+backup mode and its PMC is different (few new functionalities, different
+registers offsets, different offsets in registers for each
+functionalities). To address both SAMA5D2 and SAMA7G5 PMC add
+.save_context()/.resume_context() support to each clocks driver and call
+this from PMC driver.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-2-claudiu.beznea@microchip.com
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/clk-generated.c | 46 +++++--
+ drivers/clk/at91/clk-main.c | 66 ++++++++++
+ drivers/clk/at91/clk-master.c | 194 ++++++++++++++++++++++++++--
+ drivers/clk/at91/clk-peripheral.c | 40 +++++-
+ drivers/clk/at91/clk-pll.c | 39 ++++++
+ drivers/clk/at91/clk-programmable.c | 29 ++++-
+ drivers/clk/at91/clk-sam9x60-pll.c | 68 +++++++++-
+ drivers/clk/at91/clk-system.c | 20 +++
+ drivers/clk/at91/clk-usb.c | 27 ++++
+ drivers/clk/at91/clk-utmi.c | 39 ++++++
+ drivers/clk/at91/pmc.c | 147 +--------------------
+ drivers/clk/at91/pmc.h | 24 ++--
+ 12 files changed, 558 insertions(+), 181 deletions(-)
+
+diff --git a/drivers/clk/at91/clk-generated.c b/drivers/clk/at91/clk-generated.c
+index b656d25a9767..23cc8297ec4c 100644
+--- a/drivers/clk/at91/clk-generated.c
++++ b/drivers/clk/at91/clk-generated.c
+@@ -27,6 +27,7 @@ struct clk_generated {
+ u32 id;
+ u32 gckdiv;
+ const struct clk_pcr_layout *layout;
++ struct at91_clk_pms pms;
+ u8 parent_id;
+ int chg_pid;
+ };
+@@ -34,25 +35,35 @@ struct clk_generated {
+ #define to_clk_generated(hw) \
+ container_of(hw, struct clk_generated, hw)
+
+-static int clk_generated_enable(struct clk_hw *hw)
++static int clk_generated_set(struct clk_generated *gck, int status)
+ {
+- struct clk_generated *gck = to_clk_generated(hw);
+ unsigned long flags;
+-
+- pr_debug("GCLK: %s, gckdiv = %d, parent id = %d\n",
+- __func__, gck->gckdiv, gck->parent_id);
++ unsigned int enable = status ? AT91_PMC_PCR_GCKEN : 0;
+
+ spin_lock_irqsave(gck->lock, flags);
+ regmap_write(gck->regmap, gck->layout->offset,
+ (gck->id & gck->layout->pid_mask));
+ regmap_update_bits(gck->regmap, gck->layout->offset,
+ AT91_PMC_PCR_GCKDIV_MASK | gck->layout->gckcss_mask |
+- gck->layout->cmd | AT91_PMC_PCR_GCKEN,
++ gck->layout->cmd | enable,
+ field_prep(gck->layout->gckcss_mask, gck->parent_id) |
+ gck->layout->cmd |
+ FIELD_PREP(AT91_PMC_PCR_GCKDIV_MASK, gck->gckdiv) |
+- AT91_PMC_PCR_GCKEN);
++ enable);
+ spin_unlock_irqrestore(gck->lock, flags);
++
++ return 0;
++}
++
++static int clk_generated_enable(struct clk_hw *hw)
++{
++ struct clk_generated *gck = to_clk_generated(hw);
++
++ pr_debug("GCLK: %s, gckdiv = %d, parent id = %d\n",
++ __func__, gck->gckdiv, gck->parent_id);
++
++ clk_generated_set(gck, 1);
++
+ return 0;
+ }
+
+@@ -245,6 +256,23 @@ static int clk_generated_set_rate(struct clk_hw *hw,
+ return 0;
+ }
+
++static int clk_generated_save_context(struct clk_hw *hw)
++{
++ struct clk_generated *gck = to_clk_generated(hw);
++
++ gck->pms.status = clk_generated_is_enabled(&gck->hw);
++
++ return 0;
++}
++
++static void clk_generated_restore_context(struct clk_hw *hw)
++{
++ struct clk_generated *gck = to_clk_generated(hw);
++
++ if (gck->pms.status)
++ clk_generated_set(gck, gck->pms.status);
++}
++
+ static const struct clk_ops generated_ops = {
+ .enable = clk_generated_enable,
+ .disable = clk_generated_disable,
+@@ -254,6 +282,8 @@ static const struct clk_ops generated_ops = {
+ .get_parent = clk_generated_get_parent,
+ .set_parent = clk_generated_set_parent,
+ .set_rate = clk_generated_set_rate,
++ .save_context = clk_generated_save_context,
++ .restore_context = clk_generated_restore_context,
+ };
+
+ /**
+@@ -320,8 +350,6 @@ at91_clk_register_generated(struct regmap *regmap, spinlock_t *lock,
+ if (ret) {
+ kfree(gck);
+ hw = ERR_PTR(ret);
+- } else {
+- pmc_register_id(id);
+ }
+
+ return hw;
+diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
+index cfae2f59df66..8601b27c1ae0 100644
+--- a/drivers/clk/at91/clk-main.c
++++ b/drivers/clk/at91/clk-main.c
+@@ -28,6 +28,7 @@
+ struct clk_main_osc {
+ struct clk_hw hw;
+ struct regmap *regmap;
++ struct at91_clk_pms pms;
+ };
+
+ #define to_clk_main_osc(hw) container_of(hw, struct clk_main_osc, hw)
+@@ -37,6 +38,7 @@ struct clk_main_rc_osc {
+ struct regmap *regmap;
+ unsigned long frequency;
+ unsigned long accuracy;
++ struct at91_clk_pms pms;
+ };
+
+ #define to_clk_main_rc_osc(hw) container_of(hw, struct clk_main_rc_osc, hw)
+@@ -51,6 +53,7 @@ struct clk_rm9200_main {
+ struct clk_sam9x5_main {
+ struct clk_hw hw;
+ struct regmap *regmap;
++ struct at91_clk_pms pms;
+ u8 parent;
+ };
+
+@@ -120,10 +123,29 @@ static int clk_main_osc_is_prepared(struct clk_hw *hw)
+ return (status & AT91_PMC_MOSCS) && clk_main_parent_select(tmp);
+ }
+
++static int clk_main_osc_save_context(struct clk_hw *hw)
++{
++ struct clk_main_osc *osc = to_clk_main_osc(hw);
++
++ osc->pms.status = clk_main_osc_is_prepared(hw);
++
++ return 0;
++}
++
++static void clk_main_osc_restore_context(struct clk_hw *hw)
++{
++ struct clk_main_osc *osc = to_clk_main_osc(hw);
++
++ if (osc->pms.status)
++ clk_main_osc_prepare(hw);
++}
++
+ static const struct clk_ops main_osc_ops = {
+ .prepare = clk_main_osc_prepare,
+ .unprepare = clk_main_osc_unprepare,
+ .is_prepared = clk_main_osc_is_prepared,
++ .save_context = clk_main_osc_save_context,
++ .restore_context = clk_main_osc_restore_context,
+ };
+
+ struct clk_hw * __init
+@@ -240,12 +262,31 @@ static unsigned long clk_main_rc_osc_recalc_accuracy(struct clk_hw *hw,
+ return osc->accuracy;
+ }
+
++static int clk_main_rc_osc_save_context(struct clk_hw *hw)
++{
++ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
++
++ osc->pms.status = clk_main_rc_osc_is_prepared(hw);
++
++ return 0;
++}
++
++static void clk_main_rc_osc_restore_context(struct clk_hw *hw)
++{
++ struct clk_main_rc_osc *osc = to_clk_main_rc_osc(hw);
++
++ if (osc->pms.status)
++ clk_main_rc_osc_prepare(hw);
++}
++
+ static const struct clk_ops main_rc_osc_ops = {
+ .prepare = clk_main_rc_osc_prepare,
+ .unprepare = clk_main_rc_osc_unprepare,
+ .is_prepared = clk_main_rc_osc_is_prepared,
+ .recalc_rate = clk_main_rc_osc_recalc_rate,
+ .recalc_accuracy = clk_main_rc_osc_recalc_accuracy,
++ .save_context = clk_main_rc_osc_save_context,
++ .restore_context = clk_main_rc_osc_restore_context,
+ };
+
+ struct clk_hw * __init
+@@ -465,12 +506,37 @@ static u8 clk_sam9x5_main_get_parent(struct clk_hw *hw)
+ return clk_main_parent_select(status);
+ }
+
++static int clk_sam9x5_main_save_context(struct clk_hw *hw)
++{
++ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
++
++ clkmain->pms.status = clk_main_rc_osc_is_prepared(&clkmain->hw);
++ clkmain->pms.parent = clk_sam9x5_main_get_parent(&clkmain->hw);
++
++ return 0;
++}
++
++static void clk_sam9x5_main_restore_context(struct clk_hw *hw)
++{
++ struct clk_sam9x5_main *clkmain = to_clk_sam9x5_main(hw);
++ int ret;
++
++ ret = clk_sam9x5_main_set_parent(hw, clkmain->pms.parent);
++ if (ret)
++ return;
++
++ if (clkmain->pms.status)
++ clk_sam9x5_main_prepare(hw);
++}
++
+ static const struct clk_ops sam9x5_main_ops = {
+ .prepare = clk_sam9x5_main_prepare,
+ .is_prepared = clk_sam9x5_main_is_prepared,
+ .recalc_rate = clk_sam9x5_main_recalc_rate,
+ .set_parent = clk_sam9x5_main_set_parent,
+ .get_parent = clk_sam9x5_main_get_parent,
++ .save_context = clk_sam9x5_main_save_context,
++ .restore_context = clk_sam9x5_main_restore_context,
+ };
+
+ struct clk_hw * __init
+diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
+index a80427980bf7..f75549fff023 100644
+--- a/drivers/clk/at91/clk-master.c
++++ b/drivers/clk/at91/clk-master.c
+@@ -37,6 +37,7 @@ struct clk_master {
+ spinlock_t *lock;
+ const struct clk_master_layout *layout;
+ const struct clk_master_characteristics *characteristics;
++ struct at91_clk_pms pms;
+ u32 *mux_table;
+ u32 mckr;
+ int chg_pid;
+@@ -112,10 +113,52 @@ static unsigned long clk_master_div_recalc_rate(struct clk_hw *hw,
+ return rate;
+ }
+
++static int clk_master_div_save_context(struct clk_hw *hw)
++{
++ struct clk_master *master = to_clk_master(hw);
++ struct clk_hw *parent_hw = clk_hw_get_parent(hw);
++ unsigned long flags;
++ unsigned int mckr, div;
++
++ spin_lock_irqsave(master->lock, flags);
++ regmap_read(master->regmap, master->layout->offset, &mckr);
++ spin_unlock_irqrestore(master->lock, flags);
++
++ mckr &= master->layout->mask;
++ div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
++ div = master->characteristics->divisors[div];
++
++ master->pms.parent_rate = clk_hw_get_rate(parent_hw);
++ master->pms.rate = DIV_ROUND_CLOSEST(master->pms.parent_rate, div);
++
++ return 0;
++}
++
++static void clk_master_div_restore_context(struct clk_hw *hw)
++{
++ struct clk_master *master = to_clk_master(hw);
++ unsigned long flags;
++ unsigned int mckr;
++ u8 div;
++
++ spin_lock_irqsave(master->lock, flags);
++ regmap_read(master->regmap, master->layout->offset, &mckr);
++ spin_unlock_irqrestore(master->lock, flags);
++
++ mckr &= master->layout->mask;
++ div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
++ div = master->characteristics->divisors[div];
++
++ if (div != DIV_ROUND_CLOSEST(master->pms.parent_rate, master->pms.rate))
++ pr_warn("MCKR DIV not configured properly by firmware!\n");
++}
++
+ static const struct clk_ops master_div_ops = {
+ .prepare = clk_master_prepare,
+ .is_prepared = clk_master_is_prepared,
+ .recalc_rate = clk_master_div_recalc_rate,
++ .save_context = clk_master_div_save_context,
++ .restore_context = clk_master_div_restore_context,
+ };
+
+ static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate,
+@@ -125,7 +168,9 @@ static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ const struct clk_master_characteristics *characteristics =
+ master->characteristics;
+ unsigned long flags;
++ unsigned int mckr, tmp;
+ int div, i;
++ int ret;
+
+ div = DIV_ROUND_CLOSEST(parent_rate, rate);
+ if (div > ARRAY_SIZE(characteristics->divisors))
+@@ -145,11 +190,24 @@ static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ return -EINVAL;
+
+ spin_lock_irqsave(master->lock, flags);
+- regmap_update_bits(master->regmap, master->layout->offset,
+- (MASTER_DIV_MASK << MASTER_DIV_SHIFT),
+- (div << MASTER_DIV_SHIFT));
++ ret = regmap_read(master->regmap, master->layout->offset, &mckr);
++ if (ret)
++ goto unlock;
++
++ tmp = mckr & master->layout->mask;
++ tmp = (tmp >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
++ if (tmp == div)
++ goto unlock;
++
++ mckr &= ~(MASTER_DIV_MASK << MASTER_DIV_SHIFT);
++ mckr |= (div << MASTER_DIV_SHIFT);
++ ret = regmap_write(master->regmap, master->layout->offset, mckr);
++ if (ret)
++ goto unlock;
++
+ while (!clk_master_ready(master))
+ cpu_relax();
++unlock:
+ spin_unlock_irqrestore(master->lock, flags);
+
+ return 0;
+@@ -197,12 +255,25 @@ static int clk_master_div_determine_rate(struct clk_hw *hw,
+ return 0;
+ }
+
++static void clk_master_div_restore_context_chg(struct clk_hw *hw)
++{
++ struct clk_master *master = to_clk_master(hw);
++ int ret;
++
++ ret = clk_master_div_set_rate(hw, master->pms.rate,
++ master->pms.parent_rate);
++ if (ret)
++ pr_warn("Failed to restore MCK DIV clock\n");
++}
++
+ static const struct clk_ops master_div_ops_chg = {
+ .prepare = clk_master_prepare,
+ .is_prepared = clk_master_is_prepared,
+ .recalc_rate = clk_master_div_recalc_rate,
+ .determine_rate = clk_master_div_determine_rate,
+ .set_rate = clk_master_div_set_rate,
++ .save_context = clk_master_div_save_context,
++ .restore_context = clk_master_div_restore_context_chg,
+ };
+
+ static void clk_sama7g5_master_best_diff(struct clk_rate_request *req,
+@@ -272,7 +343,8 @@ static int clk_master_pres_set_rate(struct clk_hw *hw, unsigned long rate,
+ {
+ struct clk_master *master = to_clk_master(hw);
+ unsigned long flags;
+- unsigned int pres;
++ unsigned int pres, mckr, tmp;
++ int ret;
+
+ pres = DIV_ROUND_CLOSEST(parent_rate, rate);
+ if (pres > MASTER_PRES_MAX)
+@@ -284,15 +356,27 @@ static int clk_master_pres_set_rate(struct clk_hw *hw, unsigned long rate,
+ pres = ffs(pres) - 1;
+
+ spin_lock_irqsave(master->lock, flags);
+- regmap_update_bits(master->regmap, master->layout->offset,
+- (MASTER_PRES_MASK << master->layout->pres_shift),
+- (pres << master->layout->pres_shift));
++ ret = regmap_read(master->regmap, master->layout->offset, &mckr);
++ if (ret)
++ goto unlock;
++
++ mckr &= master->layout->mask;
++ tmp = (mckr >> master->layout->pres_shift) & MASTER_PRES_MASK;
++ if (pres == tmp)
++ goto unlock;
++
++ mckr &= ~(MASTER_PRES_MASK << master->layout->pres_shift);
++ mckr |= (pres << master->layout->pres_shift);
++ ret = regmap_write(master->regmap, master->layout->offset, mckr);
++ if (ret)
++ goto unlock;
+
+ while (!clk_master_ready(master))
+ cpu_relax();
++unlock:
+ spin_unlock_irqrestore(master->lock, flags);
+
+- return 0;
++ return ret;
+ }
+
+ static unsigned long clk_master_pres_recalc_rate(struct clk_hw *hw,
+@@ -330,11 +414,68 @@ static u8 clk_master_pres_get_parent(struct clk_hw *hw)
+ return mckr & AT91_PMC_CSS;
+ }
+
++static int clk_master_pres_save_context(struct clk_hw *hw)
++{
++ struct clk_master *master = to_clk_master(hw);
++ struct clk_hw *parent_hw = clk_hw_get_parent(hw);
++ unsigned long flags;
++ unsigned int val, pres;
++
++ spin_lock_irqsave(master->lock, flags);
++ regmap_read(master->regmap, master->layout->offset, &val);
++ spin_unlock_irqrestore(master->lock, flags);
++
++ val &= master->layout->mask;
++ pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK;
++ if (pres == MASTER_PRES_MAX && master->characteristics->have_div3_pres)
++ pres = 3;
++ else
++ pres = (1 << pres);
++
++ master->pms.parent = val & AT91_PMC_CSS;
++ master->pms.parent_rate = clk_hw_get_rate(parent_hw);
++ master->pms.rate = DIV_ROUND_CLOSEST_ULL(master->pms.parent_rate, pres);
++
++ return 0;
++}
++
++static void clk_master_pres_restore_context(struct clk_hw *hw)
++{
++ struct clk_master *master = to_clk_master(hw);
++ unsigned long flags;
++ unsigned int val, pres;
++
++ spin_lock_irqsave(master->lock, flags);
++ regmap_read(master->regmap, master->layout->offset, &val);
++ spin_unlock_irqrestore(master->lock, flags);
++
++ val &= master->layout->mask;
++ pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK;
++ if (pres == MASTER_PRES_MAX && master->characteristics->have_div3_pres)
++ pres = 3;
++ else
++ pres = (1 << pres);
++
++ if (master->pms.rate !=
++ DIV_ROUND_CLOSEST_ULL(master->pms.parent_rate, pres) ||
++ (master->pms.parent != (val & AT91_PMC_CSS)))
++ pr_warn("MCKR PRES was not configured properly by firmware!\n");
++}
++
++static void clk_master_pres_restore_context_chg(struct clk_hw *hw)
++{
++ struct clk_master *master = to_clk_master(hw);
++
++ clk_master_pres_set_rate(hw, master->pms.rate, master->pms.parent_rate);
++}
++
+ static const struct clk_ops master_pres_ops = {
+ .prepare = clk_master_prepare,
+ .is_prepared = clk_master_is_prepared,
+ .recalc_rate = clk_master_pres_recalc_rate,
+ .get_parent = clk_master_pres_get_parent,
++ .save_context = clk_master_pres_save_context,
++ .restore_context = clk_master_pres_restore_context,
+ };
+
+ static const struct clk_ops master_pres_ops_chg = {
+@@ -344,6 +485,8 @@ static const struct clk_ops master_pres_ops_chg = {
+ .recalc_rate = clk_master_pres_recalc_rate,
+ .get_parent = clk_master_pres_get_parent,
+ .set_rate = clk_master_pres_set_rate,
++ .save_context = clk_master_pres_save_context,
++ .restore_context = clk_master_pres_restore_context_chg,
+ };
+
+ static struct clk_hw * __init
+@@ -539,20 +682,21 @@ static int clk_sama7g5_master_set_parent(struct clk_hw *hw, u8 index)
+ return 0;
+ }
+
+-static int clk_sama7g5_master_enable(struct clk_hw *hw)
++static void clk_sama7g5_master_set(struct clk_master *master,
++ unsigned int status)
+ {
+- struct clk_master *master = to_clk_master(hw);
+ unsigned long flags;
+ unsigned int val, cparent;
++ unsigned int enable = status ? PMC_MCR_EN : 0;
+
+ spin_lock_irqsave(master->lock, flags);
+
+ regmap_write(master->regmap, PMC_MCR, PMC_MCR_ID(master->id));
+ regmap_read(master->regmap, PMC_MCR, &val);
+ regmap_update_bits(master->regmap, PMC_MCR,
+- PMC_MCR_EN | PMC_MCR_CSS | PMC_MCR_DIV |
++ enable | PMC_MCR_CSS | PMC_MCR_DIV |
+ PMC_MCR_CMD | PMC_MCR_ID_MSK,
+- PMC_MCR_EN | (master->parent << PMC_MCR_CSS_SHIFT) |
++ enable | (master->parent << PMC_MCR_CSS_SHIFT) |
+ (master->div << MASTER_DIV_SHIFT) |
+ PMC_MCR_CMD | PMC_MCR_ID(master->id));
+
+@@ -563,6 +707,13 @@ static int clk_sama7g5_master_enable(struct clk_hw *hw)
+ cpu_relax();
+
+ spin_unlock_irqrestore(master->lock, flags);
++}
++
++static int clk_sama7g5_master_enable(struct clk_hw *hw)
++{
++ struct clk_master *master = to_clk_master(hw);
++
++ clk_sama7g5_master_set(master, 1);
+
+ return 0;
+ }
+@@ -620,6 +771,23 @@ static int clk_sama7g5_master_set_rate(struct clk_hw *hw, unsigned long rate,
+ return 0;
+ }
+
++static int clk_sama7g5_master_save_context(struct clk_hw *hw)
++{
++ struct clk_master *master = to_clk_master(hw);
++
++ master->pms.status = clk_sama7g5_master_is_enabled(hw);
++
++ return 0;
++}
++
++static void clk_sama7g5_master_restore_context(struct clk_hw *hw)
++{
++ struct clk_master *master = to_clk_master(hw);
++
++ if (master->pms.status)
++ clk_sama7g5_master_set(master, master->pms.status);
++}
++
+ static const struct clk_ops sama7g5_master_ops = {
+ .enable = clk_sama7g5_master_enable,
+ .disable = clk_sama7g5_master_disable,
+@@ -629,6 +797,8 @@ static const struct clk_ops sama7g5_master_ops = {
+ .set_rate = clk_sama7g5_master_set_rate,
+ .get_parent = clk_sama7g5_master_get_parent,
+ .set_parent = clk_sama7g5_master_set_parent,
++ .save_context = clk_sama7g5_master_save_context,
++ .restore_context = clk_sama7g5_master_restore_context,
+ };
+
+ struct clk_hw * __init
+diff --git a/drivers/clk/at91/clk-peripheral.c b/drivers/clk/at91/clk-peripheral.c
+index 7a27ba8e0577..e14fa5ac734c 100644
+--- a/drivers/clk/at91/clk-peripheral.c
++++ b/drivers/clk/at91/clk-peripheral.c
+@@ -37,6 +37,7 @@ struct clk_sam9x5_peripheral {
+ u32 id;
+ u32 div;
+ const struct clk_pcr_layout *layout;
++ struct at91_clk_pms pms;
+ bool auto_div;
+ int chg_pid;
+ };
+@@ -155,10 +156,11 @@ static void clk_sam9x5_peripheral_autodiv(struct clk_sam9x5_peripheral *periph)
+ periph->div = shift;
+ }
+
+-static int clk_sam9x5_peripheral_enable(struct clk_hw *hw)
++static int clk_sam9x5_peripheral_set(struct clk_sam9x5_peripheral *periph,
++ unsigned int status)
+ {
+- struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
+ unsigned long flags;
++ unsigned int enable = status ? AT91_PMC_PCR_EN : 0;
+
+ if (periph->id < PERIPHERAL_ID_MIN)
+ return 0;
+@@ -168,15 +170,21 @@ static int clk_sam9x5_peripheral_enable(struct clk_hw *hw)
+ (periph->id & periph->layout->pid_mask));
+ regmap_update_bits(periph->regmap, periph->layout->offset,
+ periph->layout->div_mask | periph->layout->cmd |
+- AT91_PMC_PCR_EN,
++ enable,
+ field_prep(periph->layout->div_mask, periph->div) |
+- periph->layout->cmd |
+- AT91_PMC_PCR_EN);
++ periph->layout->cmd | enable);
+ spin_unlock_irqrestore(periph->lock, flags);
+
+ return 0;
+ }
+
++static int clk_sam9x5_peripheral_enable(struct clk_hw *hw)
++{
++ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
++
++ return clk_sam9x5_peripheral_set(periph, 1);
++}
++
+ static void clk_sam9x5_peripheral_disable(struct clk_hw *hw)
+ {
+ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
+@@ -393,6 +401,23 @@ static int clk_sam9x5_peripheral_set_rate(struct clk_hw *hw,
+ return -EINVAL;
+ }
+
++static int clk_sam9x5_peripheral_save_context(struct clk_hw *hw)
++{
++ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
++
++ periph->pms.status = clk_sam9x5_peripheral_is_enabled(hw);
++
++ return 0;
++}
++
++static void clk_sam9x5_peripheral_restore_context(struct clk_hw *hw)
++{
++ struct clk_sam9x5_peripheral *periph = to_clk_sam9x5_peripheral(hw);
++
++ if (periph->pms.status)
++ clk_sam9x5_peripheral_set(periph, periph->pms.status);
++}
++
+ static const struct clk_ops sam9x5_peripheral_ops = {
+ .enable = clk_sam9x5_peripheral_enable,
+ .disable = clk_sam9x5_peripheral_disable,
+@@ -400,6 +425,8 @@ static const struct clk_ops sam9x5_peripheral_ops = {
+ .recalc_rate = clk_sam9x5_peripheral_recalc_rate,
+ .round_rate = clk_sam9x5_peripheral_round_rate,
+ .set_rate = clk_sam9x5_peripheral_set_rate,
++ .save_context = clk_sam9x5_peripheral_save_context,
++ .restore_context = clk_sam9x5_peripheral_restore_context,
+ };
+
+ static const struct clk_ops sam9x5_peripheral_chg_ops = {
+@@ -409,6 +436,8 @@ static const struct clk_ops sam9x5_peripheral_chg_ops = {
+ .recalc_rate = clk_sam9x5_peripheral_recalc_rate,
+ .determine_rate = clk_sam9x5_peripheral_determine_rate,
+ .set_rate = clk_sam9x5_peripheral_set_rate,
++ .save_context = clk_sam9x5_peripheral_save_context,
++ .restore_context = clk_sam9x5_peripheral_restore_context,
+ };
+
+ struct clk_hw * __init
+@@ -460,7 +489,6 @@ at91_clk_register_sam9x5_peripheral(struct regmap *regmap, spinlock_t *lock,
+ hw = ERR_PTR(ret);
+ } else {
+ clk_sam9x5_peripheral_autodiv(periph);
+- pmc_register_id(id);
+ }
+
+ return hw;
+diff --git a/drivers/clk/at91/clk-pll.c b/drivers/clk/at91/clk-pll.c
+index 6ed986d3eee0..249d6a53cedf 100644
+--- a/drivers/clk/at91/clk-pll.c
++++ b/drivers/clk/at91/clk-pll.c
+@@ -40,6 +40,7 @@ struct clk_pll {
+ u16 mul;
+ const struct clk_pll_layout *layout;
+ const struct clk_pll_characteristics *characteristics;
++ struct at91_clk_pms pms;
+ };
+
+ static inline bool clk_pll_ready(struct regmap *regmap, int id)
+@@ -260,6 +261,42 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+ return 0;
+ }
+
++static int clk_pll_save_context(struct clk_hw *hw)
++{
++ struct clk_pll *pll = to_clk_pll(hw);
++ struct clk_hw *parent_hw = clk_hw_get_parent(hw);
++
++ pll->pms.parent_rate = clk_hw_get_rate(parent_hw);
++ pll->pms.rate = clk_pll_recalc_rate(&pll->hw, pll->pms.parent_rate);
++ pll->pms.status = clk_pll_ready(pll->regmap, PLL_REG(pll->id));
++
++ return 0;
++}
++
++static void clk_pll_restore_context(struct clk_hw *hw)
++{
++ struct clk_pll *pll = to_clk_pll(hw);
++ unsigned long calc_rate;
++ unsigned int pllr, pllr_out, pllr_count;
++ u8 out = 0;
++
++ if (pll->characteristics->out)
++ out = pll->characteristics->out[pll->range];
++
++ regmap_read(pll->regmap, PLL_REG(pll->id), &pllr);
++
++ calc_rate = (pll->pms.parent_rate / PLL_DIV(pllr)) *
++ (PLL_MUL(pllr, pll->layout) + 1);
++ pllr_count = (pllr >> PLL_COUNT_SHIFT) & PLL_MAX_COUNT;
++ pllr_out = (pllr >> PLL_OUT_SHIFT) & out;
++
++ if (pll->pms.rate != calc_rate ||
++ pll->pms.status != clk_pll_ready(pll->regmap, PLL_REG(pll->id)) ||
++ pllr_count != PLL_MAX_COUNT ||
++ (out && pllr_out != out))
++ pr_warn("PLLAR was not configured properly by firmware\n");
++}
++
+ static const struct clk_ops pll_ops = {
+ .prepare = clk_pll_prepare,
+ .unprepare = clk_pll_unprepare,
+@@ -267,6 +304,8 @@ static const struct clk_ops pll_ops = {
+ .recalc_rate = clk_pll_recalc_rate,
+ .round_rate = clk_pll_round_rate,
+ .set_rate = clk_pll_set_rate,
++ .save_context = clk_pll_save_context,
++ .restore_context = clk_pll_restore_context,
+ };
+
+ struct clk_hw * __init
+diff --git a/drivers/clk/at91/clk-programmable.c b/drivers/clk/at91/clk-programmable.c
+index fcf8f6a1c2c6..6c4b259d31d3 100644
+--- a/drivers/clk/at91/clk-programmable.c
++++ b/drivers/clk/at91/clk-programmable.c
+@@ -24,6 +24,7 @@ struct clk_programmable {
+ u32 *mux_table;
+ u8 id;
+ const struct clk_programmable_layout *layout;
++ struct at91_clk_pms pms;
+ };
+
+ #define to_clk_programmable(hw) container_of(hw, struct clk_programmable, hw)
+@@ -177,12 +178,38 @@ static int clk_programmable_set_rate(struct clk_hw *hw, unsigned long rate,
+ return 0;
+ }
+
++static int clk_programmable_save_context(struct clk_hw *hw)
++{
++ struct clk_programmable *prog = to_clk_programmable(hw);
++ struct clk_hw *parent_hw = clk_hw_get_parent(hw);
++
++ prog->pms.parent = clk_programmable_get_parent(hw);
++ prog->pms.parent_rate = clk_hw_get_rate(parent_hw);
++ prog->pms.rate = clk_programmable_recalc_rate(hw, prog->pms.parent_rate);
++
++ return 0;
++}
++
++static void clk_programmable_restore_context(struct clk_hw *hw)
++{
++ struct clk_programmable *prog = to_clk_programmable(hw);
++ int ret;
++
++ ret = clk_programmable_set_parent(hw, prog->pms.parent);
++ if (ret)
++ return;
++
++ clk_programmable_set_rate(hw, prog->pms.rate, prog->pms.parent_rate);
++}
++
+ static const struct clk_ops programmable_ops = {
+ .recalc_rate = clk_programmable_recalc_rate,
+ .determine_rate = clk_programmable_determine_rate,
+ .get_parent = clk_programmable_get_parent,
+ .set_parent = clk_programmable_set_parent,
+ .set_rate = clk_programmable_set_rate,
++ .save_context = clk_programmable_save_context,
++ .restore_context = clk_programmable_restore_context,
+ };
+
+ struct clk_hw * __init
+@@ -221,8 +248,6 @@ at91_clk_register_programmable(struct regmap *regmap,
+ if (ret) {
+ kfree(prog);
+ hw = ERR_PTR(ret);
+- } else {
+- pmc_register_pck(id);
+ }
+
+ return hw;
+diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
+index 1f52409475e9..a73d7c96ce1d 100644
+--- a/drivers/clk/at91/clk-sam9x60-pll.c
++++ b/drivers/clk/at91/clk-sam9x60-pll.c
+@@ -38,12 +38,14 @@ struct sam9x60_pll_core {
+
+ struct sam9x60_frac {
+ struct sam9x60_pll_core core;
++ struct at91_clk_pms pms;
+ u32 frac;
+ u16 mul;
+ };
+
+ struct sam9x60_div {
+ struct sam9x60_pll_core core;
++ struct at91_clk_pms pms;
+ u8 div;
+ };
+
+@@ -75,9 +77,8 @@ static unsigned long sam9x60_frac_pll_recalc_rate(struct clk_hw *hw,
+ DIV_ROUND_CLOSEST_ULL((u64)parent_rate * frac->frac, (1 << 22));
+ }
+
+-static int sam9x60_frac_pll_prepare(struct clk_hw *hw)
++static int sam9x60_frac_pll_set(struct sam9x60_pll_core *core)
+ {
+- struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
+ struct sam9x60_frac *frac = to_sam9x60_frac(core);
+ struct regmap *regmap = core->regmap;
+ unsigned int val, cfrac, cmul;
+@@ -141,6 +142,13 @@ static int sam9x60_frac_pll_prepare(struct clk_hw *hw)
+ return 0;
+ }
+
++static int sam9x60_frac_pll_prepare(struct clk_hw *hw)
++{
++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
++
++ return sam9x60_frac_pll_set(core);
++}
++
+ static void sam9x60_frac_pll_unprepare(struct clk_hw *hw)
+ {
+ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
+@@ -280,6 +288,25 @@ static int sam9x60_frac_pll_set_rate_chg(struct clk_hw *hw, unsigned long rate,
+ return ret;
+ }
+
++static int sam9x60_frac_pll_save_context(struct clk_hw *hw)
++{
++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
++ struct sam9x60_frac *frac = to_sam9x60_frac(core);
++
++ frac->pms.status = sam9x60_pll_ready(core->regmap, core->id);
++
++ return 0;
++}
++
++static void sam9x60_frac_pll_restore_context(struct clk_hw *hw)
++{
++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
++ struct sam9x60_frac *frac = to_sam9x60_frac(core);
++
++ if (frac->pms.status)
++ sam9x60_frac_pll_set(core);
++}
++
+ static const struct clk_ops sam9x60_frac_pll_ops = {
+ .prepare = sam9x60_frac_pll_prepare,
+ .unprepare = sam9x60_frac_pll_unprepare,
+@@ -287,6 +314,8 @@ static const struct clk_ops sam9x60_frac_pll_ops = {
+ .recalc_rate = sam9x60_frac_pll_recalc_rate,
+ .round_rate = sam9x60_frac_pll_round_rate,
+ .set_rate = sam9x60_frac_pll_set_rate,
++ .save_context = sam9x60_frac_pll_save_context,
++ .restore_context = sam9x60_frac_pll_restore_context,
+ };
+
+ static const struct clk_ops sam9x60_frac_pll_ops_chg = {
+@@ -296,11 +325,12 @@ static const struct clk_ops sam9x60_frac_pll_ops_chg = {
+ .recalc_rate = sam9x60_frac_pll_recalc_rate,
+ .round_rate = sam9x60_frac_pll_round_rate,
+ .set_rate = sam9x60_frac_pll_set_rate_chg,
++ .save_context = sam9x60_frac_pll_save_context,
++ .restore_context = sam9x60_frac_pll_restore_context,
+ };
+
+-static int sam9x60_div_pll_prepare(struct clk_hw *hw)
++static int sam9x60_div_pll_set(struct sam9x60_pll_core *core)
+ {
+- struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
+ struct sam9x60_div *div = to_sam9x60_div(core);
+ struct regmap *regmap = core->regmap;
+ unsigned long flags;
+@@ -334,6 +364,13 @@ static int sam9x60_div_pll_prepare(struct clk_hw *hw)
+ return 0;
+ }
+
++static int sam9x60_div_pll_prepare(struct clk_hw *hw)
++{
++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
++
++ return sam9x60_div_pll_set(core);
++}
++
+ static void sam9x60_div_pll_unprepare(struct clk_hw *hw)
+ {
+ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
+@@ -482,6 +519,25 @@ static int sam9x60_div_pll_set_rate_chg(struct clk_hw *hw, unsigned long rate,
+ return 0;
+ }
+
++static int sam9x60_div_pll_save_context(struct clk_hw *hw)
++{
++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
++ struct sam9x60_div *div = to_sam9x60_div(core);
++
++ div->pms.status = sam9x60_div_pll_is_prepared(hw);
++
++ return 0;
++}
++
++static void sam9x60_div_pll_restore_context(struct clk_hw *hw)
++{
++ struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
++ struct sam9x60_div *div = to_sam9x60_div(core);
++
++ if (div->pms.status)
++ sam9x60_div_pll_set(core);
++}
++
+ static const struct clk_ops sam9x60_div_pll_ops = {
+ .prepare = sam9x60_div_pll_prepare,
+ .unprepare = sam9x60_div_pll_unprepare,
+@@ -489,6 +545,8 @@ static const struct clk_ops sam9x60_div_pll_ops = {
+ .recalc_rate = sam9x60_div_pll_recalc_rate,
+ .round_rate = sam9x60_div_pll_round_rate,
+ .set_rate = sam9x60_div_pll_set_rate,
++ .save_context = sam9x60_div_pll_save_context,
++ .restore_context = sam9x60_div_pll_restore_context,
+ };
+
+ static const struct clk_ops sam9x60_div_pll_ops_chg = {
+@@ -498,6 +556,8 @@ static const struct clk_ops sam9x60_div_pll_ops_chg = {
+ .recalc_rate = sam9x60_div_pll_recalc_rate,
+ .round_rate = sam9x60_div_pll_round_rate,
+ .set_rate = sam9x60_div_pll_set_rate_chg,
++ .save_context = sam9x60_div_pll_save_context,
++ .restore_context = sam9x60_div_pll_restore_context,
+ };
+
+ struct clk_hw * __init
+diff --git a/drivers/clk/at91/clk-system.c b/drivers/clk/at91/clk-system.c
+index f83ec0de86c3..80720fd1a9cf 100644
+--- a/drivers/clk/at91/clk-system.c
++++ b/drivers/clk/at91/clk-system.c
+@@ -20,6 +20,7 @@
+ struct clk_system {
+ struct clk_hw hw;
+ struct regmap *regmap;
++ struct at91_clk_pms pms;
+ u8 id;
+ };
+
+@@ -77,10 +78,29 @@ static int clk_system_is_prepared(struct clk_hw *hw)
+ return !!(status & (1 << sys->id));
+ }
+
++static int clk_system_save_context(struct clk_hw *hw)
++{
++ struct clk_system *sys = to_clk_system(hw);
++
++ sys->pms.status = clk_system_is_prepared(hw);
++
++ return 0;
++}
++
++static void clk_system_restore_context(struct clk_hw *hw)
++{
++ struct clk_system *sys = to_clk_system(hw);
++
++ if (sys->pms.status)
++ clk_system_prepare(&sys->hw);
++}
++
+ static const struct clk_ops system_ops = {
+ .prepare = clk_system_prepare,
+ .unprepare = clk_system_unprepare,
+ .is_prepared = clk_system_is_prepared,
++ .save_context = clk_system_save_context,
++ .restore_context = clk_system_restore_context,
+ };
+
+ struct clk_hw * __init
+diff --git a/drivers/clk/at91/clk-usb.c b/drivers/clk/at91/clk-usb.c
+index 31d5c45e30d7..b0696a928aa9 100644
+--- a/drivers/clk/at91/clk-usb.c
++++ b/drivers/clk/at91/clk-usb.c
+@@ -24,6 +24,7 @@
+ struct at91sam9x5_clk_usb {
+ struct clk_hw hw;
+ struct regmap *regmap;
++ struct at91_clk_pms pms;
+ u32 usbs_mask;
+ u8 num_parents;
+ };
+@@ -148,12 +149,38 @@ static int at91sam9x5_clk_usb_set_rate(struct clk_hw *hw, unsigned long rate,
+ return 0;
+ }
+
++static int at91sam9x5_usb_save_context(struct clk_hw *hw)
++{
++ struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
++ struct clk_hw *parent_hw = clk_hw_get_parent(hw);
++
++ usb->pms.parent = at91sam9x5_clk_usb_get_parent(hw);
++ usb->pms.parent_rate = clk_hw_get_rate(parent_hw);
++ usb->pms.rate = at91sam9x5_clk_usb_recalc_rate(hw, usb->pms.parent_rate);
++
++ return 0;
++}
++
++static void at91sam9x5_usb_restore_context(struct clk_hw *hw)
++{
++ struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
++ int ret;
++
++ ret = at91sam9x5_clk_usb_set_parent(hw, usb->pms.parent);
++ if (ret)
++ return;
++
++ at91sam9x5_clk_usb_set_rate(hw, usb->pms.rate, usb->pms.parent_rate);
++}
++
+ static const struct clk_ops at91sam9x5_usb_ops = {
+ .recalc_rate = at91sam9x5_clk_usb_recalc_rate,
+ .determine_rate = at91sam9x5_clk_usb_determine_rate,
+ .get_parent = at91sam9x5_clk_usb_get_parent,
+ .set_parent = at91sam9x5_clk_usb_set_parent,
+ .set_rate = at91sam9x5_clk_usb_set_rate,
++ .save_context = at91sam9x5_usb_save_context,
++ .restore_context = at91sam9x5_usb_restore_context,
+ };
+
+ static int at91sam9n12_clk_usb_enable(struct clk_hw *hw)
+diff --git a/drivers/clk/at91/clk-utmi.c b/drivers/clk/at91/clk-utmi.c
+index df9f3fc3b6a6..a22c10d9a1b9 100644
+--- a/drivers/clk/at91/clk-utmi.c
++++ b/drivers/clk/at91/clk-utmi.c
+@@ -23,6 +23,7 @@ struct clk_utmi {
+ struct clk_hw hw;
+ struct regmap *regmap_pmc;
+ struct regmap *regmap_sfr;
++ struct at91_clk_pms pms;
+ };
+
+ #define to_clk_utmi(hw) container_of(hw, struct clk_utmi, hw)
+@@ -113,11 +114,30 @@ static unsigned long clk_utmi_recalc_rate(struct clk_hw *hw,
+ return UTMI_RATE;
+ }
+
++static int clk_utmi_save_context(struct clk_hw *hw)
++{
++ struct clk_utmi *utmi = to_clk_utmi(hw);
++
++ utmi->pms.status = clk_utmi_is_prepared(hw);
++
++ return 0;
++}
++
++static void clk_utmi_restore_context(struct clk_hw *hw)
++{
++ struct clk_utmi *utmi = to_clk_utmi(hw);
++
++ if (utmi->pms.status)
++ clk_utmi_prepare(hw);
++}
++
+ static const struct clk_ops utmi_ops = {
+ .prepare = clk_utmi_prepare,
+ .unprepare = clk_utmi_unprepare,
+ .is_prepared = clk_utmi_is_prepared,
+ .recalc_rate = clk_utmi_recalc_rate,
++ .save_context = clk_utmi_save_context,
++ .restore_context = clk_utmi_restore_context,
+ };
+
+ static struct clk_hw * __init
+@@ -232,10 +252,29 @@ static int clk_utmi_sama7g5_is_prepared(struct clk_hw *hw)
+ return 0;
+ }
+
++static int clk_utmi_sama7g5_save_context(struct clk_hw *hw)
++{
++ struct clk_utmi *utmi = to_clk_utmi(hw);
++
++ utmi->pms.status = clk_utmi_sama7g5_is_prepared(hw);
++
++ return 0;
++}
++
++static void clk_utmi_sama7g5_restore_context(struct clk_hw *hw)
++{
++ struct clk_utmi *utmi = to_clk_utmi(hw);
++
++ if (utmi->pms.status)
++ clk_utmi_sama7g5_prepare(hw);
++}
++
+ static const struct clk_ops sama7g5_utmi_ops = {
+ .prepare = clk_utmi_sama7g5_prepare,
+ .is_prepared = clk_utmi_sama7g5_is_prepared,
+ .recalc_rate = clk_utmi_recalc_rate,
++ .save_context = clk_utmi_sama7g5_save_context,
++ .restore_context = clk_utmi_sama7g5_restore_context,
+ };
+
+ struct clk_hw * __init
+diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
+index b40035b011d0..b2806946a77a 100644
+--- a/drivers/clk/at91/pmc.c
++++ b/drivers/clk/at91/pmc.c
+@@ -3,6 +3,7 @@
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
+ */
+
++#include <linux/clk.h>
+ #include <linux/clk-provider.h>
+ #include <linux/clkdev.h>
+ #include <linux/clk/at91_pmc.h>
+@@ -14,8 +15,6 @@
+
+ #include <asm/proc-fns.h>
+
+-#include <dt-bindings/clock/at91.h>
+-
+ #include "pmc.h"
+
+ #define PMC_MAX_IDS 128
+@@ -111,147 +110,19 @@ struct pmc_data *pmc_data_allocate(unsigned int ncore, unsigned int nsystem,
+ }
+
+ #ifdef CONFIG_PM
+-static struct regmap *pmcreg;
+-
+-static u8 registered_ids[PMC_MAX_IDS];
+-static u8 registered_pcks[PMC_MAX_PCKS];
+-
+-static struct
+-{
+- u32 scsr;
+- u32 pcsr0;
+- u32 uckr;
+- u32 mor;
+- u32 mcfr;
+- u32 pllar;
+- u32 mckr;
+- u32 usb;
+- u32 imr;
+- u32 pcsr1;
+- u32 pcr[PMC_MAX_IDS];
+- u32 audio_pll0;
+- u32 audio_pll1;
+- u32 pckr[PMC_MAX_PCKS];
+-} pmc_cache;
+-
+-/*
+- * As Peripheral ID 0 is invalid on AT91 chips, the identifier is stored
+- * without alteration in the table, and 0 is for unused clocks.
+- */
+-void pmc_register_id(u8 id)
+-{
+- int i;
+-
+- for (i = 0; i < PMC_MAX_IDS; i++) {
+- if (registered_ids[i] == 0) {
+- registered_ids[i] = id;
+- break;
+- }
+- if (registered_ids[i] == id)
+- break;
+- }
+-}
+-
+-/*
+- * As Programmable Clock 0 is valid on AT91 chips, there is an offset
+- * of 1 between the stored value and the real clock ID.
+- */
+-void pmc_register_pck(u8 pck)
+-{
+- int i;
+-
+- for (i = 0; i < PMC_MAX_PCKS; i++) {
+- if (registered_pcks[i] == 0) {
+- registered_pcks[i] = pck + 1;
+- break;
+- }
+- if (registered_pcks[i] == (pck + 1))
+- break;
+- }
+-}
+-
+-static int pmc_suspend(void)
++static int at91_pmc_suspend(void)
+ {
+- int i;
+- u8 num;
+-
+- regmap_read(pmcreg, AT91_PMC_SCSR, &pmc_cache.scsr);
+- regmap_read(pmcreg, AT91_PMC_PCSR, &pmc_cache.pcsr0);
+- regmap_read(pmcreg, AT91_CKGR_UCKR, &pmc_cache.uckr);
+- regmap_read(pmcreg, AT91_CKGR_MOR, &pmc_cache.mor);
+- regmap_read(pmcreg, AT91_CKGR_MCFR, &pmc_cache.mcfr);
+- regmap_read(pmcreg, AT91_CKGR_PLLAR, &pmc_cache.pllar);
+- regmap_read(pmcreg, AT91_PMC_MCKR, &pmc_cache.mckr);
+- regmap_read(pmcreg, AT91_PMC_USB, &pmc_cache.usb);
+- regmap_read(pmcreg, AT91_PMC_IMR, &pmc_cache.imr);
+- regmap_read(pmcreg, AT91_PMC_PCSR1, &pmc_cache.pcsr1);
+-
+- for (i = 0; registered_ids[i]; i++) {
+- regmap_write(pmcreg, AT91_PMC_PCR,
+- (registered_ids[i] & AT91_PMC_PCR_PID_MASK));
+- regmap_read(pmcreg, AT91_PMC_PCR,
+- &pmc_cache.pcr[registered_ids[i]]);
+- }
+- for (i = 0; registered_pcks[i]; i++) {
+- num = registered_pcks[i] - 1;
+- regmap_read(pmcreg, AT91_PMC_PCKR(num), &pmc_cache.pckr[num]);
+- }
+-
+- return 0;
++ return clk_save_context();
+ }
+
+-static bool pmc_ready(unsigned int mask)
++static void at91_pmc_resume(void)
+ {
+- unsigned int status;
+-
+- regmap_read(pmcreg, AT91_PMC_SR, &status);
+-
+- return ((status & mask) == mask) ? 1 : 0;
+-}
+-
+-static void pmc_resume(void)
+-{
+- int i;
+- u8 num;
+- u32 tmp;
+- u32 mask = AT91_PMC_MCKRDY | AT91_PMC_LOCKA;
+-
+- regmap_read(pmcreg, AT91_PMC_MCKR, &tmp);
+- if (pmc_cache.mckr != tmp)
+- pr_warn("MCKR was not configured properly by the firmware\n");
+- regmap_read(pmcreg, AT91_CKGR_PLLAR, &tmp);
+- if (pmc_cache.pllar != tmp)
+- pr_warn("PLLAR was not configured properly by the firmware\n");
+-
+- regmap_write(pmcreg, AT91_PMC_SCER, pmc_cache.scsr);
+- regmap_write(pmcreg, AT91_PMC_PCER, pmc_cache.pcsr0);
+- regmap_write(pmcreg, AT91_CKGR_UCKR, pmc_cache.uckr);
+- regmap_write(pmcreg, AT91_CKGR_MOR, pmc_cache.mor);
+- regmap_write(pmcreg, AT91_CKGR_MCFR, pmc_cache.mcfr);
+- regmap_write(pmcreg, AT91_PMC_USB, pmc_cache.usb);
+- regmap_write(pmcreg, AT91_PMC_IMR, pmc_cache.imr);
+- regmap_write(pmcreg, AT91_PMC_PCER1, pmc_cache.pcsr1);
+-
+- for (i = 0; registered_ids[i]; i++) {
+- regmap_write(pmcreg, AT91_PMC_PCR,
+- pmc_cache.pcr[registered_ids[i]] |
+- AT91_PMC_PCR_CMD);
+- }
+- for (i = 0; registered_pcks[i]; i++) {
+- num = registered_pcks[i] - 1;
+- regmap_write(pmcreg, AT91_PMC_PCKR(num), pmc_cache.pckr[num]);
+- }
+-
+- if (pmc_cache.uckr & AT91_PMC_UPLLEN)
+- mask |= AT91_PMC_LOCKU;
+-
+- while (!pmc_ready(mask))
+- cpu_relax();
++ clk_restore_context();
+ }
+
+ static struct syscore_ops pmc_syscore_ops = {
+- .suspend = pmc_suspend,
+- .resume = pmc_resume,
++ .suspend = at91_pmc_suspend,
++ .resume = at91_pmc_resume,
+ };
+
+ static const struct of_device_id sama5d2_pmc_dt_ids[] = {
+@@ -271,11 +142,7 @@ static int __init pmc_register_ops(void)
+ of_node_put(np);
+ return -ENODEV;
+ }
+-
+- pmcreg = device_node_to_regmap(np);
+ of_node_put(np);
+- if (IS_ERR(pmcreg))
+- return PTR_ERR(pmcreg);
+
+ register_syscore_ops(&pmc_syscore_ops);
+
+diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
+index a49076c804a9..45df094498ce 100644
+--- a/drivers/clk/at91/pmc.h
++++ b/drivers/clk/at91/pmc.h
+@@ -13,6 +13,8 @@
+ #include <linux/regmap.h>
+ #include <linux/spinlock.h>
+
++#include <dt-bindings/clock/at91.h>
++
+ extern spinlock_t pmc_pcr_lock;
+
+ struct pmc_data {
+@@ -98,6 +100,20 @@ struct clk_pcr_layout {
+ u32 pid_mask;
+ };
+
++/**
++ * struct at91_clk_pms - Power management state for AT91 clock
++ * @rate: clock rate
++ * @parent_rate: clock parent rate
++ * @status: clock status (enabled or disabled)
++ * @parent: clock parent index
++ */
++struct at91_clk_pms {
++ unsigned long rate;
++ unsigned long parent_rate;
++ unsigned int status;
++ unsigned int parent;
++};
++
+ #define field_get(_mask, _reg) (((_reg) & (_mask)) >> (ffs(_mask) - 1))
+ #define field_prep(_mask, _val) (((_val) << (ffs(_mask) - 1)) & (_mask))
+
+@@ -248,12 +264,4 @@ struct clk_hw * __init
+ at91_clk_sama7g5_register_utmi(struct regmap *regmap, const char *name,
+ const char *parent_name);
+
+-#ifdef CONFIG_PM
+-void pmc_register_id(u8 id);
+-void pmc_register_pck(u8 pck);
+-#else
+-static inline void pmc_register_id(u8 id) {}
+-static inline void pmc_register_pck(u8 pck) {}
+-#endif
+-
+ #endif /* __PMC_H_ */
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/235-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch b/target/linux/at91/patches-5.10/235-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch
new file mode 100644
index 0000000000..2f8dcf6217
--- /dev/null
+++ b/target/linux/at91/patches-5.10/235-clk-at91-pmc-execute-suspend-resume-only-for-backup-.patch
@@ -0,0 +1,94 @@
+From 63a0c32028148e91ea91cfbf95841c4ecd69d21b Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:06 +0300
+Subject: [PATCH 235/247] clk: at91: pmc: execute suspend/resume only for
+ backup mode
+
+Before going to backup mode architecture specific PM code sets the first
+word in securam (file arch/arm/mach-at91/pm.c, function at91_pm_begin()).
+Thus take this into account when suspending/resuming clocks. This will
+avoid executing unnecessary instructions when suspending to non backup
+modes.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-3-claudiu.beznea@microchip.com
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/pmc.c | 39 +++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 39 insertions(+)
+
+diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
+index b2806946a77a..517973062719 100644
+--- a/drivers/clk/at91/pmc.c
++++ b/drivers/clk/at91/pmc.c
+@@ -8,6 +8,7 @@
+ #include <linux/clkdev.h>
+ #include <linux/clk/at91_pmc.h>
+ #include <linux/of.h>
++#include <linux/of_address.h>
+ #include <linux/mfd/syscon.h>
+ #include <linux/platform_device.h>
+ #include <linux/regmap.h>
+@@ -110,13 +111,35 @@ struct pmc_data *pmc_data_allocate(unsigned int ncore, unsigned int nsystem,
+ }
+
+ #ifdef CONFIG_PM
++
++/* Address in SECURAM that say if we suspend to backup mode. */
++static void __iomem *at91_pmc_backup_suspend;
++
+ static int at91_pmc_suspend(void)
+ {
++ unsigned int backup;
++
++ if (!at91_pmc_backup_suspend)
++ return 0;
++
++ backup = readl_relaxed(at91_pmc_backup_suspend);
++ if (!backup)
++ return 0;
++
+ return clk_save_context();
+ }
+
+ static void at91_pmc_resume(void)
+ {
++ unsigned int backup;
++
++ if (!at91_pmc_backup_suspend)
++ return;
++
++ backup = readl_relaxed(at91_pmc_backup_suspend);
++ if (!backup)
++ return;
++
+ clk_restore_context();
+ }
+
+@@ -144,6 +167,22 @@ static int __init pmc_register_ops(void)
+ }
+ of_node_put(np);
+
++ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
++ if (!np)
++ return -ENODEV;
++
++ if (!of_device_is_available(np)) {
++ of_node_put(np);
++ return -ENODEV;
++ }
++ of_node_put(np);
++
++ at91_pmc_backup_suspend = of_iomap(np, 0);
++ if (!at91_pmc_backup_suspend) {
++ pr_warn("%s(): unable to map securam\n", __func__);
++ return -ENOMEM;
++ }
++
+ register_syscore_ops(&pmc_syscore_ops);
+
+ return 0;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/236-clk-at91-sama7g5-add-securam-s-peripheral-clock.patch b/target/linux/at91/patches-5.10/236-clk-at91-sama7g5-add-securam-s-peripheral-clock.patch
new file mode 100644
index 0000000000..a2f91a842d
--- /dev/null
+++ b/target/linux/at91/patches-5.10/236-clk-at91-sama7g5-add-securam-s-peripheral-clock.patch
@@ -0,0 +1,30 @@
+From 50edd53c26177e95995533b7d649801086a52f6c Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:07 +0300
+Subject: [PATCH 236/247] clk: at91: sama7g5: add securam's peripheral clock
+
+Add SECURAM's peripheral clock.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-4-claudiu.beznea@microchip.com
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/sama7g5.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index cf8c079aa086..970135e19a75 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -377,6 +377,7 @@ static const struct {
+ u8 id;
+ } sama7g5_periphck[] = {
+ { .n = "pioA_clk", .p = "mck0", .id = 11, },
++ { .n = "securam_clk", .p = "mck0", .id = 18, },
+ { .n = "sfr_clk", .p = "mck1", .id = 19, },
+ { .n = "hsmc_clk", .p = "mck1", .id = 21, },
+ { .n = "xdmac0_clk", .p = "mck1", .id = 22, },
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/237-clk-at91-clk-master-add-register-definition-for-sama.patch b/target/linux/at91/patches-5.10/237-clk-at91-clk-master-add-register-definition-for-sama.patch
new file mode 100644
index 0000000000..026b65fc01
--- /dev/null
+++ b/target/linux/at91/patches-5.10/237-clk-at91-clk-master-add-register-definition-for-sama.patch
@@ -0,0 +1,129 @@
+From c716562753d1e51a1c53647aa77a332f97187d15 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:08 +0300
+Subject: [PATCH 237/247] clk: at91: clk-master: add register definition for
+ sama7g5's master clock
+
+SAMA7G5 has 4 master clocks (MCK1..4) which are controlled though the
+register at offset 0x30 (relative to PMC). In the last/first phase of
+suspend/resume procedure (which is architecture specific) the parent
+of master clocks are changed (via assembly code) for more power saving
+(see file arch/arm/mach-at91/pm_suspend.S, macros at91_mckx_ps_enable
+and at91_mckx_ps_restore). Thus the macros corresponding to register
+at offset 0x30 need to be shared b/w clk-master.c and pm_suspend.S.
+commit ec03f18cc222 ("clk: at91: add register definition for sama7g5's
+master clock") introduced the proper macros but didn't adapted the
+clk-master.c as well. Thus, this commit adapt the clk-master.c to use
+the macros introduced in commit ec03f18cc222 ("clk: at91: add register
+definition for sama7g5's master clock").
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-5-claudiu.beznea@microchip.com
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/clk-master.c | 50 ++++++++++++++++-------------------
+ 1 file changed, 23 insertions(+), 27 deletions(-)
+
+diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
+index f75549fff023..88f7af1bfff6 100644
+--- a/drivers/clk/at91/clk-master.c
++++ b/drivers/clk/at91/clk-master.c
+@@ -17,15 +17,7 @@
+ #define MASTER_DIV_SHIFT 8
+ #define MASTER_DIV_MASK 0x7
+
+-#define PMC_MCR 0x30
+-#define PMC_MCR_ID_MSK GENMASK(3, 0)
+-#define PMC_MCR_CMD BIT(7)
+-#define PMC_MCR_DIV GENMASK(10, 8)
+-#define PMC_MCR_CSS GENMASK(20, 16)
+ #define PMC_MCR_CSS_SHIFT (16)
+-#define PMC_MCR_EN BIT(28)
+-
+-#define PMC_MCR_ID(x) ((x) & PMC_MCR_ID_MSK)
+
+ #define MASTER_MAX_ID 4
+
+@@ -687,20 +679,22 @@ static void clk_sama7g5_master_set(struct clk_master *master,
+ {
+ unsigned long flags;
+ unsigned int val, cparent;
+- unsigned int enable = status ? PMC_MCR_EN : 0;
++ unsigned int enable = status ? AT91_PMC_MCR_V2_EN : 0;
+
+ spin_lock_irqsave(master->lock, flags);
+
+- regmap_write(master->regmap, PMC_MCR, PMC_MCR_ID(master->id));
+- regmap_read(master->regmap, PMC_MCR, &val);
+- regmap_update_bits(master->regmap, PMC_MCR,
+- enable | PMC_MCR_CSS | PMC_MCR_DIV |
+- PMC_MCR_CMD | PMC_MCR_ID_MSK,
++ regmap_write(master->regmap, AT91_PMC_MCR_V2,
++ AT91_PMC_MCR_V2_ID(master->id));
++ regmap_read(master->regmap, AT91_PMC_MCR_V2, &val);
++ regmap_update_bits(master->regmap, AT91_PMC_MCR_V2,
++ enable | AT91_PMC_MCR_V2_CSS | AT91_PMC_MCR_V2_DIV |
++ AT91_PMC_MCR_V2_CMD | AT91_PMC_MCR_V2_ID_MSK,
+ enable | (master->parent << PMC_MCR_CSS_SHIFT) |
+ (master->div << MASTER_DIV_SHIFT) |
+- PMC_MCR_CMD | PMC_MCR_ID(master->id));
++ AT91_PMC_MCR_V2_CMD |
++ AT91_PMC_MCR_V2_ID(master->id));
+
+- cparent = (val & PMC_MCR_CSS) >> PMC_MCR_CSS_SHIFT;
++ cparent = (val & AT91_PMC_MCR_V2_CSS) >> PMC_MCR_CSS_SHIFT;
+
+ /* Wait here only if parent is being changed. */
+ while ((cparent != master->parent) && !clk_master_ready(master))
+@@ -725,10 +719,12 @@ static void clk_sama7g5_master_disable(struct clk_hw *hw)
+
+ spin_lock_irqsave(master->lock, flags);
+
+- regmap_write(master->regmap, PMC_MCR, master->id);
+- regmap_update_bits(master->regmap, PMC_MCR,
+- PMC_MCR_EN | PMC_MCR_CMD | PMC_MCR_ID_MSK,
+- PMC_MCR_CMD | PMC_MCR_ID(master->id));
++ regmap_write(master->regmap, AT91_PMC_MCR_V2, master->id);
++ regmap_update_bits(master->regmap, AT91_PMC_MCR_V2,
++ AT91_PMC_MCR_V2_EN | AT91_PMC_MCR_V2_CMD |
++ AT91_PMC_MCR_V2_ID_MSK,
++ AT91_PMC_MCR_V2_CMD |
++ AT91_PMC_MCR_V2_ID(master->id));
+
+ spin_unlock_irqrestore(master->lock, flags);
+ }
+@@ -741,12 +737,12 @@ static int clk_sama7g5_master_is_enabled(struct clk_hw *hw)
+
+ spin_lock_irqsave(master->lock, flags);
+
+- regmap_write(master->regmap, PMC_MCR, master->id);
+- regmap_read(master->regmap, PMC_MCR, &val);
++ regmap_write(master->regmap, AT91_PMC_MCR_V2, master->id);
++ regmap_read(master->regmap, AT91_PMC_MCR_V2, &val);
+
+ spin_unlock_irqrestore(master->lock, flags);
+
+- return !!(val & PMC_MCR_EN);
++ return !!(val & AT91_PMC_MCR_V2_EN);
+ }
+
+ static int clk_sama7g5_master_set_rate(struct clk_hw *hw, unsigned long rate,
+@@ -842,10 +838,10 @@ at91_clk_sama7g5_register_master(struct regmap *regmap,
+ master->mux_table = mux_table;
+
+ spin_lock_irqsave(master->lock, flags);
+- regmap_write(master->regmap, PMC_MCR, master->id);
+- regmap_read(master->regmap, PMC_MCR, &val);
+- master->parent = (val & PMC_MCR_CSS) >> PMC_MCR_CSS_SHIFT;
+- master->div = (val & PMC_MCR_DIV) >> MASTER_DIV_SHIFT;
++ regmap_write(master->regmap, AT91_PMC_MCR_V2, master->id);
++ regmap_read(master->regmap, AT91_PMC_MCR_V2, &val);
++ master->parent = (val & AT91_PMC_MCR_V2_CSS) >> PMC_MCR_CSS_SHIFT;
++ master->div = (val & AT91_PMC_MCR_V2_DIV) >> MASTER_DIV_SHIFT;
+ spin_unlock_irqrestore(master->lock, flags);
+
+ hw = &master->hw;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/238-clk-at91-clk-master-improve-readability-by-using-loc.patch b/target/linux/at91/patches-5.10/238-clk-at91-clk-master-improve-readability-by-using-loc.patch
new file mode 100644
index 0000000000..df53d453f8
--- /dev/null
+++ b/target/linux/at91/patches-5.10/238-clk-at91-clk-master-improve-readability-by-using-loc.patch
@@ -0,0 +1,45 @@
+From 17b53ad1574cb5f41789993289d3d94f7a50f0ce Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:09 +0300
+Subject: [PATCH 238/247] clk: at91: clk-master: improve readability by using
+ local variables
+
+Improve readability in clk_sama7g5_master_set() by using local
+variables.
+
+Suggested-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-6-claudiu.beznea@microchip.com
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/clk-master.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
+index 88f7af1bfff6..9a2c8e64cacf 100644
+--- a/drivers/clk/at91/clk-master.c
++++ b/drivers/clk/at91/clk-master.c
+@@ -680,6 +680,8 @@ static void clk_sama7g5_master_set(struct clk_master *master,
+ unsigned long flags;
+ unsigned int val, cparent;
+ unsigned int enable = status ? AT91_PMC_MCR_V2_EN : 0;
++ unsigned int parent = master->parent << PMC_MCR_CSS_SHIFT;
++ unsigned int div = master->div << MASTER_DIV_SHIFT;
+
+ spin_lock_irqsave(master->lock, flags);
+
+@@ -689,9 +691,7 @@ static void clk_sama7g5_master_set(struct clk_master *master,
+ regmap_update_bits(master->regmap, AT91_PMC_MCR_V2,
+ enable | AT91_PMC_MCR_V2_CSS | AT91_PMC_MCR_V2_DIV |
+ AT91_PMC_MCR_V2_CMD | AT91_PMC_MCR_V2_ID_MSK,
+- enable | (master->parent << PMC_MCR_CSS_SHIFT) |
+- (master->div << MASTER_DIV_SHIFT) |
+- AT91_PMC_MCR_V2_CMD |
++ enable | parent | div | AT91_PMC_MCR_V2_CMD |
+ AT91_PMC_MCR_V2_ID(master->id));
+
+ cparent = (val & AT91_PMC_MCR_V2_CSS) >> PMC_MCR_CSS_SHIFT;
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/239-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch b/target/linux/at91/patches-5.10/239-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch
new file mode 100644
index 0000000000..6569d7a9ee
--- /dev/null
+++ b/target/linux/at91/patches-5.10/239-clk-at91-pmc-add-sama7g5-to-the-list-of-available-pm.patch
@@ -0,0 +1,44 @@
+From 8a38e0dda46c9d941a61d8b2e6c14704531b7871 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:10 +0300
+Subject: [PATCH 239/247] clk: at91: pmc: add sama7g5 to the list of available
+ pmcs
+
+Add SAMA7G5 to the list of available PMCs such that the suspend/resume
+code for clocks to be used on backup mode.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-7-claudiu.beznea@microchip.com
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/pmc.c | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/clk/at91/pmc.c b/drivers/clk/at91/pmc.c
+index 517973062719..5aa9c1f1c886 100644
+--- a/drivers/clk/at91/pmc.c
++++ b/drivers/clk/at91/pmc.c
+@@ -148,8 +148,9 @@ static struct syscore_ops pmc_syscore_ops = {
+ .resume = at91_pmc_resume,
+ };
+
+-static const struct of_device_id sama5d2_pmc_dt_ids[] = {
++static const struct of_device_id pmc_dt_ids[] = {
+ { .compatible = "atmel,sama5d2-pmc" },
++ { .compatible = "microchip,sama7g5-pmc", },
+ { /* sentinel */ }
+ };
+
+@@ -157,7 +158,7 @@ static int __init pmc_register_ops(void)
+ {
+ struct device_node *np;
+
+- np = of_find_matching_node(NULL, sama5d2_pmc_dt_ids);
++ np = of_find_matching_node(NULL, pmc_dt_ids);
+ if (!np)
+ return -ENODEV;
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/240-clk-at91-clk-master-check-if-div-or-pres-is-zero.patch b/target/linux/at91/patches-5.10/240-clk-at91-clk-master-check-if-div-or-pres-is-zero.patch
new file mode 100644
index 0000000000..6bcc3df498
--- /dev/null
+++ b/target/linux/at91/patches-5.10/240-clk-at91-clk-master-check-if-div-or-pres-is-zero.patch
@@ -0,0 +1,44 @@
+From bb8e6ca274763fa98613dbe8b0833348a1d8fe4d Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:12 +0300
+Subject: [PATCH 240/247] clk: at91: clk-master: check if div or pres is zero
+
+Check if div or pres is zero before using it as argument for ffs().
+In case div is zero ffs() will return 0 and thus substracting from
+zero will lead to invalid values to be setup in registers.
+
+Fixes: 7a110b9107ed8 ("clk: at91: clk-master: re-factor master clock")
+Fixes: 75c88143f3b87 ("clk: at91: clk-master: add master clock support for SAMA7G5")
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-9-claudiu.beznea@microchip.com
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/clk-master.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
+index 9a2c8e64cacf..2093e13b5068 100644
+--- a/drivers/clk/at91/clk-master.c
++++ b/drivers/clk/at91/clk-master.c
+@@ -344,7 +344,7 @@ static int clk_master_pres_set_rate(struct clk_hw *hw, unsigned long rate,
+
+ else if (pres == 3)
+ pres = MASTER_PRES_MAX;
+- else
++ else if (pres)
+ pres = ffs(pres) - 1;
+
+ spin_lock_irqsave(master->lock, flags);
+@@ -757,7 +757,7 @@ static int clk_sama7g5_master_set_rate(struct clk_hw *hw, unsigned long rate,
+
+ if (div == 3)
+ div = MASTER_PRES_MAX;
+- else
++ else if (div)
+ div = ffs(div) - 1;
+
+ spin_lock_irqsave(master->lock, flags);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/241-clk-at91-clk-master-mask-mckr-against-layout-mask.patch b/target/linux/at91/patches-5.10/241-clk-at91-clk-master-mask-mckr-against-layout-mask.patch
new file mode 100644
index 0000000000..2f53a44eae
--- /dev/null
+++ b/target/linux/at91/patches-5.10/241-clk-at91-clk-master-mask-mckr-against-layout-mask.patch
@@ -0,0 +1,51 @@
+From 27c11c09346b7b9f67eeb39db1b943f4a9742ff3 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:13 +0300
+Subject: [PATCH 241/247] clk: at91: clk-master: mask mckr against layout->mask
+
+Mask values read/written from/to MCKR against layout->mask as this
+mask may be different b/w PMC versions.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-10-claudiu.beznea@microchip.com
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/clk-master.c | 7 +++++--
+ 1 file changed, 5 insertions(+), 2 deletions(-)
+
+diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
+index 2093e13b5068..6da9ae34313a 100644
+--- a/drivers/clk/at91/clk-master.c
++++ b/drivers/clk/at91/clk-master.c
+@@ -186,8 +186,8 @@ static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ if (ret)
+ goto unlock;
+
+- tmp = mckr & master->layout->mask;
+- tmp = (tmp >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
++ mckr &= master->layout->mask;
++ tmp = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
+ if (tmp == div)
+ goto unlock;
+
+@@ -384,6 +384,7 @@ static unsigned long clk_master_pres_recalc_rate(struct clk_hw *hw,
+ regmap_read(master->regmap, master->layout->offset, &val);
+ spin_unlock_irqrestore(master->lock, flags);
+
++ val &= master->layout->mask;
+ pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK;
+ if (pres == 3 && characteristics->have_div3_pres)
+ pres = 3;
+@@ -403,6 +404,8 @@ static u8 clk_master_pres_get_parent(struct clk_hw *hw)
+ regmap_read(master->regmap, master->layout->offset, &mckr);
+ spin_unlock_irqrestore(master->lock, flags);
+
++ mckr &= master->layout->mask;
++
+ return mckr & AT91_PMC_CSS;
+ }
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/242-clk-at91-clk-master-fix-prescaler-logic.patch b/target/linux/at91/patches-5.10/242-clk-at91-clk-master-fix-prescaler-logic.patch
new file mode 100644
index 0000000000..3562d4ec21
--- /dev/null
+++ b/target/linux/at91/patches-5.10/242-clk-at91-clk-master-fix-prescaler-logic.patch
@@ -0,0 +1,34 @@
+From 4375cd63b55860f5e82618dc5f50846b3129842a Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:14 +0300
+Subject: [PATCH 242/247] clk: at91: clk-master: fix prescaler logic
+
+When prescaler value read from register is MASTER_PRES_MAX it means
+that the input clock will be divided by 3. Fix the code to reflect
+this.
+
+Fixes: 7a110b9107ed8 ("clk: at91: clk-master: re-factor master clock")
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-11-claudiu.beznea@microchip.com
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/clk-master.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
+index 6da9ae34313a..e67bcd03a827 100644
+--- a/drivers/clk/at91/clk-master.c
++++ b/drivers/clk/at91/clk-master.c
+@@ -386,7 +386,7 @@ static unsigned long clk_master_pres_recalc_rate(struct clk_hw *hw,
+
+ val &= master->layout->mask;
+ pres = (val >> master->layout->pres_shift) & MASTER_PRES_MASK;
+- if (pres == 3 && characteristics->have_div3_pres)
++ if (pres == MASTER_PRES_MAX && characteristics->have_div3_pres)
+ pres = 3;
+ else
+ pres = (1 << pres);
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/243-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch b/target/linux/at91/patches-5.10/243-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch
new file mode 100644
index 0000000000..f101f71fcd
--- /dev/null
+++ b/target/linux/at91/patches-5.10/243-clk-at91-clk-sam9x60-pll-add-notifier-for-div-part-o.patch
@@ -0,0 +1,323 @@
+From e76d2af5009f52aa02d3db7ae32d150ad66398f9 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:15 +0300
+Subject: [PATCH 243/247] clk: at91: clk-sam9x60-pll: add notifier for div part
+ of PLL
+
+SAM9X60's PLL which is also part of SAMA7G5 is composed of 2 parts:
+one fractional part and one divider. On SAMA7G5 the CPU PLL could be
+changed at run-time to implement DVFS. The hardware clock tree on
+SAMA7G5 for CPU PLL is as follows:
+
+ +---- div1 ----------------> cpuck
+ |
+FRAC PLL ---> DIV PLL -+-> prescaler ---> div0 ---> mck0
+
+The div1 block is not implemented in Linux; on prescaler block it has
+been discovered a bug on some scenarios and will be removed from Linux
+in next commits. Thus, the final clock tree that will be used in Linux
+will be as follows:
+
+ +-----------> cpuck
+ |
+FRAC PLL ---> DIV PLL -+-> div0 ---> mck0
+
+It has been proposed in [1] to not introduce a new CPUFreq driver but
+to overload the proper clock drivers with proper operation such that
+cpufreq-dt to be used. To accomplish this DIV PLL and div0 implement
+clock notifiers which applies safe dividers before FRAC PLL is changed.
+The current commit treats only the DIV PLL by adding a notifier that
+sets a safe divider on PRE_RATE_CHANGE events. The safe divider is
+provided by initialization clock code (sama7g5.c). The div0 is treated
+in next commits (to keep the changes as clean as possible).
+
+[1] https://lore.kernel.org/lkml/20210105104426.4tmgc2l3vyicwedd@vireshk-i7/
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-12-claudiu.beznea@microchip.com
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/clk-sam9x60-pll.c | 102 ++++++++++++++++++++++-------
+ drivers/clk/at91/pmc.h | 3 +-
+ drivers/clk/at91/sam9x60.c | 6 +-
+ drivers/clk/at91/sama7g5.c | 13 +++-
+ 4 files changed, 95 insertions(+), 29 deletions(-)
+
+diff --git a/drivers/clk/at91/clk-sam9x60-pll.c b/drivers/clk/at91/clk-sam9x60-pll.c
+index a73d7c96ce1d..d757003004cb 100644
+--- a/drivers/clk/at91/clk-sam9x60-pll.c
++++ b/drivers/clk/at91/clk-sam9x60-pll.c
+@@ -5,6 +5,7 @@
+ */
+
+ #include <linux/bitfield.h>
++#include <linux/clk.h>
+ #include <linux/clk-provider.h>
+ #include <linux/clkdev.h>
+ #include <linux/clk/at91_pmc.h>
+@@ -47,12 +48,15 @@ struct sam9x60_div {
+ struct sam9x60_pll_core core;
+ struct at91_clk_pms pms;
+ u8 div;
++ u8 safe_div;
+ };
+
+ #define to_sam9x60_pll_core(hw) container_of(hw, struct sam9x60_pll_core, hw)
+ #define to_sam9x60_frac(core) container_of(core, struct sam9x60_frac, core)
+ #define to_sam9x60_div(core) container_of(core, struct sam9x60_div, core)
+
++static struct sam9x60_div *notifier_div;
++
+ static inline bool sam9x60_pll_ready(struct regmap *regmap, int id)
+ {
+ unsigned int status;
+@@ -329,6 +333,26 @@ static const struct clk_ops sam9x60_frac_pll_ops_chg = {
+ .restore_context = sam9x60_frac_pll_restore_context,
+ };
+
++/* This function should be called with spinlock acquired. */
++static void sam9x60_div_pll_set_div(struct sam9x60_pll_core *core, u32 div,
++ bool enable)
++{
++ struct regmap *regmap = core->regmap;
++ u32 ena_msk = enable ? core->layout->endiv_mask : 0;
++ u32 ena_val = enable ? (1 << core->layout->endiv_shift) : 0;
++
++ regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0,
++ core->layout->div_mask | ena_msk,
++ (div << core->layout->div_shift) | ena_val);
++
++ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
++ AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
++ AT91_PMC_PLL_UPDT_UPDATE | core->id);
++
++ while (!sam9x60_pll_ready(regmap, core->id))
++ cpu_relax();
++}
++
+ static int sam9x60_div_pll_set(struct sam9x60_pll_core *core)
+ {
+ struct sam9x60_div *div = to_sam9x60_div(core);
+@@ -346,17 +370,7 @@ static int sam9x60_div_pll_set(struct sam9x60_pll_core *core)
+ if (!!(val & core->layout->endiv_mask) && cdiv == div->div)
+ goto unlock;
+
+- regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0,
+- core->layout->div_mask | core->layout->endiv_mask,
+- (div->div << core->layout->div_shift) |
+- (1 << core->layout->endiv_shift));
+-
+- regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
+- AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
+- AT91_PMC_PLL_UPDT_UPDATE | core->id);
+-
+- while (!sam9x60_pll_ready(regmap, core->id))
+- cpu_relax();
++ sam9x60_div_pll_set_div(core, div->div, 1);
+
+ unlock:
+ spin_unlock_irqrestore(core->lock, flags);
+@@ -502,16 +516,7 @@ static int sam9x60_div_pll_set_rate_chg(struct clk_hw *hw, unsigned long rate,
+ if (cdiv == div->div)
+ goto unlock;
+
+- regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0,
+- core->layout->div_mask,
+- (div->div << core->layout->div_shift));
+-
+- regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
+- AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
+- AT91_PMC_PLL_UPDT_UPDATE | core->id);
+-
+- while (!sam9x60_pll_ready(regmap, core->id))
+- cpu_relax();
++ sam9x60_div_pll_set_div(core, div->div, 0);
+
+ unlock:
+ spin_unlock_irqrestore(core->lock, irqflags);
+@@ -538,6 +543,48 @@ static void sam9x60_div_pll_restore_context(struct clk_hw *hw)
+ sam9x60_div_pll_set(core);
+ }
+
++static int sam9x60_div_pll_notifier_fn(struct notifier_block *notifier,
++ unsigned long code, void *data)
++{
++ struct sam9x60_div *div = notifier_div;
++ struct sam9x60_pll_core core = div->core;
++ struct regmap *regmap = core.regmap;
++ unsigned long irqflags;
++ u32 val, cdiv;
++ int ret = NOTIFY_DONE;
++
++ if (code != PRE_RATE_CHANGE)
++ return ret;
++
++ /*
++ * We switch to safe divider to avoid overclocking of other domains
++ * feed by us while the frac PLL (our parent) is changed.
++ */
++ div->div = div->safe_div;
++
++ spin_lock_irqsave(core.lock, irqflags);
++ regmap_update_bits(regmap, AT91_PMC_PLL_UPDT, AT91_PMC_PLL_UPDT_ID_MSK,
++ core.id);
++ regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val);
++ cdiv = (val & core.layout->div_mask) >> core.layout->div_shift;
++
++ /* Stop if nothing changed. */
++ if (cdiv == div->safe_div)
++ goto unlock;
++
++ sam9x60_div_pll_set_div(&core, div->div, 0);
++ ret = NOTIFY_OK;
++
++unlock:
++ spin_unlock_irqrestore(core.lock, irqflags);
++
++ return ret;
++}
++
++static struct notifier_block sam9x60_div_pll_notifier = {
++ .notifier_call = sam9x60_div_pll_notifier_fn,
++};
++
+ static const struct clk_ops sam9x60_div_pll_ops = {
+ .prepare = sam9x60_div_pll_prepare,
+ .unprepare = sam9x60_div_pll_unprepare,
+@@ -647,7 +694,8 @@ struct clk_hw * __init
+ sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
+ const char *name, const char *parent_name, u8 id,
+ const struct clk_pll_characteristics *characteristics,
+- const struct clk_pll_layout *layout, u32 flags)
++ const struct clk_pll_layout *layout, u32 flags,
++ u32 safe_div)
+ {
+ struct sam9x60_div *div;
+ struct clk_hw *hw;
+@@ -656,9 +704,13 @@ sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
+ unsigned int val;
+ int ret;
+
+- if (id > PLL_MAX_ID || !lock)
++ /* We only support one changeable PLL. */
++ if (id > PLL_MAX_ID || !lock || (safe_div && notifier_div))
+ return ERR_PTR(-EINVAL);
+
++ if (safe_div >= PLL_DIV_MAX)
++ safe_div = PLL_DIV_MAX - 1;
++
+ div = kzalloc(sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return ERR_PTR(-ENOMEM);
+@@ -678,6 +730,7 @@ sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
+ div->core.layout = layout;
+ div->core.regmap = regmap;
+ div->core.lock = lock;
++ div->safe_div = safe_div;
+
+ spin_lock_irqsave(div->core.lock, irqflags);
+
+@@ -693,6 +746,9 @@ sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
+ if (ret) {
+ kfree(div);
+ hw = ERR_PTR(ret);
++ } else if (div->safe_div) {
++ notifier_div = div;
++ clk_notifier_register(hw->clk, &sam9x60_div_pll_notifier);
+ }
+
+ return hw;
+diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
+index 45df094498ce..207ecccef29f 100644
+--- a/drivers/clk/at91/pmc.h
++++ b/drivers/clk/at91/pmc.h
+@@ -214,7 +214,8 @@ struct clk_hw * __init
+ sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
+ const char *name, const char *parent_name, u8 id,
+ const struct clk_pll_characteristics *characteristics,
+- const struct clk_pll_layout *layout, u32 flags);
++ const struct clk_pll_layout *layout, u32 flags,
++ u32 safe_div);
+
+ struct clk_hw * __init
+ sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
+diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
+index 5f6fa89571b7..5c264185f261 100644
+--- a/drivers/clk/at91/sam9x60.c
++++ b/drivers/clk/at91/sam9x60.c
+@@ -242,7 +242,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
+ * This feeds CPU. It should not
+ * be disabled.
+ */
+- CLK_IS_CRITICAL | CLK_SET_RATE_GATE);
++ CLK_IS_CRITICAL | CLK_SET_RATE_GATE, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -260,7 +260,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
+ &pll_div_layout,
+ CLK_SET_RATE_GATE |
+ CLK_SET_PARENT_GATE |
+- CLK_SET_RATE_PARENT);
++ CLK_SET_RATE_PARENT, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+@@ -279,7 +279,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
+ hw = at91_clk_register_master_div(regmap, "masterck_div",
+ "masterck_pres", &sam9x60_master_layout,
+ &mck_characteristics, &mck_lock,
+- CLK_SET_RATE_GATE);
++ CLK_SET_RATE_GATE, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index 970135e19a75..ae52c10af040 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -127,6 +127,8 @@ static const struct clk_pll_characteristics pll_characteristics = {
+ * @t: clock type
+ * @f: clock flags
+ * @eid: export index in sama7g5->chws[] array
++ * @safe_div: intermediate divider need to be set on PRE_RATE_CHANGE
++ * notification
+ */
+ static const struct {
+ const char *n;
+@@ -136,6 +138,7 @@ static const struct {
+ unsigned long f;
+ u8 t;
+ u8 eid;
++ u8 safe_div;
+ } sama7g5_plls[][PLL_ID_MAX] = {
+ [PLL_ID_CPU] = {
+ { .n = "cpupll_fracck",
+@@ -156,7 +159,12 @@ static const struct {
+ .t = PLL_TYPE_DIV,
+ /* This feeds CPU. It should not be disabled. */
+ .f = CLK_IS_CRITICAL | CLK_SET_RATE_PARENT,
+- .eid = PMC_CPUPLL, },
++ .eid = PMC_CPUPLL,
++ /*
++ * Safe div=15 should be safe even for switching b/w 1GHz and
++ * 90MHz (frac pll might go up to 1.2GHz).
++ */
++ .safe_div = 15, },
+ },
+
+ [PLL_ID_SYS] = {
+@@ -967,7 +975,8 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ sama7g5_plls[i][j].p, i,
+ sama7g5_plls[i][j].c,
+ sama7g5_plls[i][j].l,
+- sama7g5_plls[i][j].f);
++ sama7g5_plls[i][j].f,
++ sama7g5_plls[i][j].safe_div);
+ break;
+
+ default:
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/244-clk-at91-clk-master-add-notifier-for-divider.patch b/target/linux/at91/patches-5.10/244-clk-at91-clk-master-add-notifier-for-divider.patch
new file mode 100644
index 0000000000..9298d2f0c7
--- /dev/null
+++ b/target/linux/at91/patches-5.10/244-clk-at91-clk-master-add-notifier-for-divider.patch
@@ -0,0 +1,548 @@
+From 75d5d1d584ae73ba0c36d1d7255db6153ca4d3f3 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:16 +0300
+Subject: [PATCH 244/247] clk: at91: clk-master: add notifier for divider
+
+SAMA7G5 supports DVFS by changing cpuck. On SAMA7G5 mck0 shares the same
+parent with cpuck as seen in the following clock tree:
+
+ +----------> cpuck
+ |
+FRAC PLL ---> DIV PLL -+-> DIV ---> mck0
+
+mck0 could go b/w 32KHz and 200MHz on SAMA7G5. To avoid mck0 overclocking
+while changing FRAC PLL or DIV PLL the commit implements a notifier for
+mck0 which applies a safe divider to register (maximum value of the divider
+which is 5) on PRE_RATE_CHANGE events (such that changes on PLL to not
+overclock mck0) and sets the maximum allowed rate on POST_RATE_CHANGE
+events.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-13-claudiu.beznea@microchip.com
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/at91rm9200.c | 2 +-
+ drivers/clk/at91/at91sam9260.c | 2 +-
+ drivers/clk/at91/at91sam9g45.c | 2 +-
+ drivers/clk/at91/at91sam9n12.c | 2 +-
+ drivers/clk/at91/at91sam9rl.c | 2 +-
+ drivers/clk/at91/at91sam9x5.c | 2 +-
+ drivers/clk/at91/clk-master.c | 244 +++++++++++++++++++++++----------
+ drivers/clk/at91/dt-compat.c | 2 +-
+ drivers/clk/at91/pmc.h | 2 +-
+ drivers/clk/at91/sama5d2.c | 2 +-
+ drivers/clk/at91/sama5d3.c | 2 +-
+ drivers/clk/at91/sama5d4.c | 2 +-
+ drivers/clk/at91/sama7g5.c | 2 +-
+ 13 files changed, 186 insertions(+), 82 deletions(-)
+
+diff --git a/drivers/clk/at91/at91rm9200.c b/drivers/clk/at91/at91rm9200.c
+index 428a6f4b9ebc..fff4fdda974f 100644
+--- a/drivers/clk/at91/at91rm9200.c
++++ b/drivers/clk/at91/at91rm9200.c
+@@ -152,7 +152,7 @@ static void __init at91rm9200_pmc_setup(struct device_node *np)
+ "masterck_pres",
+ &at91rm9200_master_layout,
+ &rm9200_mck_characteristics,
+- &rm9200_mck_lock, CLK_SET_RATE_GATE);
++ &rm9200_mck_lock, CLK_SET_RATE_GATE, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+diff --git a/drivers/clk/at91/at91sam9260.c b/drivers/clk/at91/at91sam9260.c
+index b29843bea278..79802f864ee5 100644
+--- a/drivers/clk/at91/at91sam9260.c
++++ b/drivers/clk/at91/at91sam9260.c
+@@ -429,7 +429,7 @@ static void __init at91sam926x_pmc_setup(struct device_node *np,
+ &at91rm9200_master_layout,
+ data->mck_characteristics,
+ &at91sam9260_mck_lock,
+- CLK_SET_RATE_GATE);
++ CLK_SET_RATE_GATE, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c
+index 15da0dfe3ef2..7ed984f8058c 100644
+--- a/drivers/clk/at91/at91sam9g45.c
++++ b/drivers/clk/at91/at91sam9g45.c
+@@ -164,7 +164,7 @@ static void __init at91sam9g45_pmc_setup(struct device_node *np)
+ &at91rm9200_master_layout,
+ &mck_characteristics,
+ &at91sam9g45_mck_lock,
+- CLK_SET_RATE_GATE);
++ CLK_SET_RATE_GATE, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c
+index 7fe435f4b46b..63cc58944b00 100644
+--- a/drivers/clk/at91/at91sam9n12.c
++++ b/drivers/clk/at91/at91sam9n12.c
+@@ -191,7 +191,7 @@ static void __init at91sam9n12_pmc_setup(struct device_node *np)
+ &at91sam9x5_master_layout,
+ &mck_characteristics,
+ &at91sam9n12_mck_lock,
+- CLK_SET_RATE_GATE);
++ CLK_SET_RATE_GATE, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+diff --git a/drivers/clk/at91/at91sam9rl.c b/drivers/clk/at91/at91sam9rl.c
+index ecbabf5162bd..4d4faf6c61d8 100644
+--- a/drivers/clk/at91/at91sam9rl.c
++++ b/drivers/clk/at91/at91sam9rl.c
+@@ -132,7 +132,7 @@ static void __init at91sam9rl_pmc_setup(struct device_node *np)
+ "masterck_pres",
+ &at91rm9200_master_layout,
+ &sam9rl_mck_characteristics,
+- &sam9rl_mck_lock, CLK_SET_RATE_GATE);
++ &sam9rl_mck_lock, CLK_SET_RATE_GATE, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+diff --git a/drivers/clk/at91/at91sam9x5.c b/drivers/clk/at91/at91sam9x5.c
+index 5cce48c64ea2..bd8007b4f3e0 100644
+--- a/drivers/clk/at91/at91sam9x5.c
++++ b/drivers/clk/at91/at91sam9x5.c
+@@ -210,7 +210,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
+ "masterck_pres",
+ &at91sam9x5_master_layout,
+ &mck_characteristics, &mck_lock,
+- CLK_SET_RATE_GATE);
++ CLK_SET_RATE_GATE, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+diff --git a/drivers/clk/at91/clk-master.c b/drivers/clk/at91/clk-master.c
+index e67bcd03a827..b2d0a7f4f7f9 100644
+--- a/drivers/clk/at91/clk-master.c
++++ b/drivers/clk/at91/clk-master.c
+@@ -5,6 +5,7 @@
+
+ #include <linux/clk-provider.h>
+ #include <linux/clkdev.h>
++#include <linux/clk.h>
+ #include <linux/clk/at91_pmc.h>
+ #include <linux/of.h>
+ #include <linux/mfd/syscon.h>
+@@ -36,8 +37,12 @@ struct clk_master {
+ u8 id;
+ u8 parent;
+ u8 div;
++ u32 safe_div;
+ };
+
++/* MCK div reference to be used by notifier. */
++static struct clk_master *master_div;
++
+ static inline bool clk_master_ready(struct clk_master *master)
+ {
+ unsigned int bit = master->id ? AT91_PMC_MCKXRDY : AT91_PMC_MCKRDY;
+@@ -153,107 +158,81 @@ static const struct clk_ops master_div_ops = {
+ .restore_context = clk_master_div_restore_context,
+ };
+
+-static int clk_master_div_set_rate(struct clk_hw *hw, unsigned long rate,
+- unsigned long parent_rate)
++/* This function must be called with lock acquired. */
++static int clk_master_div_set(struct clk_master *master,
++ unsigned long parent_rate, int div)
+ {
+- struct clk_master *master = to_clk_master(hw);
+ const struct clk_master_characteristics *characteristics =
+ master->characteristics;
+- unsigned long flags;
+- unsigned int mckr, tmp;
+- int div, i;
++ unsigned long rate = parent_rate;
++ unsigned int max_div = 0, div_index = 0, max_div_index = 0;
++ unsigned int i, mckr, tmp;
+ int ret;
+
+- div = DIV_ROUND_CLOSEST(parent_rate, rate);
+- if (div > ARRAY_SIZE(characteristics->divisors))
+- return -EINVAL;
+-
+ for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) {
+ if (!characteristics->divisors[i])
+ break;
+
+- if (div == characteristics->divisors[i]) {
+- div = i;
+- break;
++ if (div == characteristics->divisors[i])
++ div_index = i;
++
++ if (max_div < characteristics->divisors[i]) {
++ max_div = characteristics->divisors[i];
++ max_div_index = i;
+ }
+ }
+
+- if (i == ARRAY_SIZE(characteristics->divisors))
+- return -EINVAL;
++ if (div > max_div)
++ div_index = max_div_index;
+
+- spin_lock_irqsave(master->lock, flags);
+ ret = regmap_read(master->regmap, master->layout->offset, &mckr);
+ if (ret)
+- goto unlock;
++ return ret;
+
+ mckr &= master->layout->mask;
+ tmp = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
+- if (tmp == div)
+- goto unlock;
++ if (tmp == div_index)
++ return 0;
++
++ rate /= characteristics->divisors[div_index];
++ if (rate < characteristics->output.min)
++ pr_warn("master clk div is underclocked");
++ else if (rate > characteristics->output.max)
++ pr_warn("master clk div is overclocked");
+
+ mckr &= ~(MASTER_DIV_MASK << MASTER_DIV_SHIFT);
+- mckr |= (div << MASTER_DIV_SHIFT);
++ mckr |= (div_index << MASTER_DIV_SHIFT);
+ ret = regmap_write(master->regmap, master->layout->offset, mckr);
+ if (ret)
+- goto unlock;
++ return ret;
+
+ while (!clk_master_ready(master))
+ cpu_relax();
+-unlock:
+- spin_unlock_irqrestore(master->lock, flags);
++
++ master->div = characteristics->divisors[div_index];
+
+ return 0;
+ }
+
+-static int clk_master_div_determine_rate(struct clk_hw *hw,
+- struct clk_rate_request *req)
++static unsigned long clk_master_div_recalc_rate_chg(struct clk_hw *hw,
++ unsigned long parent_rate)
+ {
+ struct clk_master *master = to_clk_master(hw);
+- const struct clk_master_characteristics *characteristics =
+- master->characteristics;
+- struct clk_hw *parent;
+- unsigned long parent_rate, tmp_rate, best_rate = 0;
+- int i, best_diff = INT_MIN, tmp_diff;
+-
+- parent = clk_hw_get_parent(hw);
+- if (!parent)
+- return -EINVAL;
+-
+- parent_rate = clk_hw_get_rate(parent);
+- if (!parent_rate)
+- return -EINVAL;
+-
+- for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) {
+- if (!characteristics->divisors[i])
+- break;
+
+- tmp_rate = DIV_ROUND_CLOSEST_ULL(parent_rate,
+- characteristics->divisors[i]);
+- tmp_diff = abs(tmp_rate - req->rate);
+-
+- if (!best_rate || best_diff > tmp_diff) {
+- best_diff = tmp_diff;
+- best_rate = tmp_rate;
+- }
+-
+- if (!best_diff)
+- break;
+- }
+-
+- req->best_parent_rate = best_rate;
+- req->best_parent_hw = parent;
+- req->rate = best_rate;
+-
+- return 0;
++ return DIV_ROUND_CLOSEST_ULL(parent_rate, master->div);
+ }
+
+ static void clk_master_div_restore_context_chg(struct clk_hw *hw)
+ {
+ struct clk_master *master = to_clk_master(hw);
++ unsigned long flags;
+ int ret;
+
+- ret = clk_master_div_set_rate(hw, master->pms.rate,
+- master->pms.parent_rate);
++ spin_lock_irqsave(master->lock, flags);
++ ret = clk_master_div_set(master, master->pms.parent_rate,
++ DIV_ROUND_CLOSEST(master->pms.parent_rate,
++ master->pms.rate));
++ spin_unlock_irqrestore(master->lock, flags);
+ if (ret)
+ pr_warn("Failed to restore MCK DIV clock\n");
+ }
+@@ -261,13 +240,116 @@ static void clk_master_div_restore_context_chg(struct clk_hw *hw)
+ static const struct clk_ops master_div_ops_chg = {
+ .prepare = clk_master_prepare,
+ .is_prepared = clk_master_is_prepared,
+- .recalc_rate = clk_master_div_recalc_rate,
+- .determine_rate = clk_master_div_determine_rate,
+- .set_rate = clk_master_div_set_rate,
++ .recalc_rate = clk_master_div_recalc_rate_chg,
+ .save_context = clk_master_div_save_context,
+ .restore_context = clk_master_div_restore_context_chg,
+ };
+
++static int clk_master_div_notifier_fn(struct notifier_block *notifier,
++ unsigned long code, void *data)
++{
++ const struct clk_master_characteristics *characteristics =
++ master_div->characteristics;
++ struct clk_notifier_data *cnd = data;
++ unsigned long flags, new_parent_rate, new_rate;
++ unsigned int mckr, div, new_div = 0;
++ int ret, i;
++ long tmp_diff;
++ long best_diff = -1;
++
++ spin_lock_irqsave(master_div->lock, flags);
++ switch (code) {
++ case PRE_RATE_CHANGE:
++ /*
++ * We want to avoid any overclocking of MCK DIV domain. To do
++ * this we set a safe divider (the underclocking is not of
++ * interest as we can go as low as 32KHz). The relation
++ * b/w this clock and its parents are as follows:
++ *
++ * FRAC PLL -> DIV PLL -> MCK DIV
++ *
++ * With the proper safe divider we should be good even with FRAC
++ * PLL at its maximum value.
++ */
++ ret = regmap_read(master_div->regmap, master_div->layout->offset,
++ &mckr);
++ if (ret) {
++ ret = NOTIFY_STOP_MASK;
++ goto unlock;
++ }
++
++ mckr &= master_div->layout->mask;
++ div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
++
++ /* Switch to safe divider. */
++ clk_master_div_set(master_div,
++ cnd->old_rate * characteristics->divisors[div],
++ master_div->safe_div);
++ break;
++
++ case POST_RATE_CHANGE:
++ /*
++ * At this point we want to restore MCK DIV domain to its maximum
++ * allowed rate.
++ */
++ ret = regmap_read(master_div->regmap, master_div->layout->offset,
++ &mckr);
++ if (ret) {
++ ret = NOTIFY_STOP_MASK;
++ goto unlock;
++ }
++
++ mckr &= master_div->layout->mask;
++ div = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
++ new_parent_rate = cnd->new_rate * characteristics->divisors[div];
++
++ for (i = 0; i < ARRAY_SIZE(characteristics->divisors); i++) {
++ if (!characteristics->divisors[i])
++ break;
++
++ new_rate = DIV_ROUND_CLOSEST_ULL(new_parent_rate,
++ characteristics->divisors[i]);
++
++ tmp_diff = characteristics->output.max - new_rate;
++ if (tmp_diff < 0)
++ continue;
++
++ if (best_diff < 0 || best_diff > tmp_diff) {
++ new_div = characteristics->divisors[i];
++ best_diff = tmp_diff;
++ }
++
++ if (!tmp_diff)
++ break;
++ }
++
++ if (!new_div) {
++ ret = NOTIFY_STOP_MASK;
++ goto unlock;
++ }
++
++ /* Update the div to preserve MCK DIV clock rate. */
++ clk_master_div_set(master_div, new_parent_rate,
++ new_div);
++
++ ret = NOTIFY_OK;
++ break;
++
++ default:
++ ret = NOTIFY_DONE;
++ break;
++ }
++
++unlock:
++ spin_unlock_irqrestore(master_div->lock, flags);
++
++ return ret;
++}
++
++static struct notifier_block clk_master_div_notifier = {
++ .notifier_call = clk_master_div_notifier_fn,
++};
++
+ static void clk_sama7g5_master_best_diff(struct clk_rate_request *req,
+ struct clk_hw *parent,
+ unsigned long parent_rate,
+@@ -496,6 +578,8 @@ at91_clk_register_master_internal(struct regmap *regmap,
+ struct clk_master *master;
+ struct clk_init_data init;
+ struct clk_hw *hw;
++ unsigned int mckr;
++ unsigned long irqflags;
+ int ret;
+
+ if (!name || !num_parents || !parent_names || !lock)
+@@ -518,6 +602,16 @@ at91_clk_register_master_internal(struct regmap *regmap,
+ master->chg_pid = chg_pid;
+ master->lock = lock;
+
++ if (ops == &master_div_ops_chg) {
++ spin_lock_irqsave(master->lock, irqflags);
++ regmap_read(master->regmap, master->layout->offset, &mckr);
++ spin_unlock_irqrestore(master->lock, irqflags);
++
++ mckr &= layout->mask;
++ mckr = (mckr >> MASTER_DIV_SHIFT) & MASTER_DIV_MASK;
++ master->div = characteristics->divisors[mckr];
++ }
++
+ hw = &master->hw;
+ ret = clk_hw_register(NULL, &master->hw);
+ if (ret) {
+@@ -554,19 +648,29 @@ at91_clk_register_master_div(struct regmap *regmap,
+ const char *name, const char *parent_name,
+ const struct clk_master_layout *layout,
+ const struct clk_master_characteristics *characteristics,
+- spinlock_t *lock, u32 flags)
++ spinlock_t *lock, u32 flags, u32 safe_div)
+ {
+ const struct clk_ops *ops;
++ struct clk_hw *hw;
+
+ if (flags & CLK_SET_RATE_GATE)
+ ops = &master_div_ops;
+ else
+ ops = &master_div_ops_chg;
+
+- return at91_clk_register_master_internal(regmap, name, 1,
+- &parent_name, layout,
+- characteristics, ops,
+- lock, flags, -EINVAL);
++ hw = at91_clk_register_master_internal(regmap, name, 1,
++ &parent_name, layout,
++ characteristics, ops,
++ lock, flags, -EINVAL);
++
++ if (!IS_ERR(hw) && safe_div) {
++ master_div = to_clk_master(hw);
++ master_div->safe_div = safe_div;
++ clk_notifier_register(hw->clk,
++ &clk_master_div_notifier);
++ }
++
++ return hw;
+ }
+
+ static unsigned long
+diff --git a/drivers/clk/at91/dt-compat.c b/drivers/clk/at91/dt-compat.c
+index a97b99c2dc12..ca2dbb65b9df 100644
+--- a/drivers/clk/at91/dt-compat.c
++++ b/drivers/clk/at91/dt-compat.c
+@@ -399,7 +399,7 @@ of_at91_clk_master_setup(struct device_node *np,
+
+ hw = at91_clk_register_master_div(regmap, name, "masterck_pres",
+ layout, characteristics,
+- &mck_lock, CLK_SET_RATE_GATE);
++ &mck_lock, CLK_SET_RATE_GATE, 0);
+ if (IS_ERR(hw))
+ goto out_free_characteristics;
+
+diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
+index 207ecccef29f..3a1bf6194c28 100644
+--- a/drivers/clk/at91/pmc.h
++++ b/drivers/clk/at91/pmc.h
+@@ -182,7 +182,7 @@ at91_clk_register_master_div(struct regmap *regmap, const char *name,
+ const char *parent_names,
+ const struct clk_master_layout *layout,
+ const struct clk_master_characteristics *characteristics,
+- spinlock_t *lock, u32 flags);
++ spinlock_t *lock, u32 flags, u32 safe_div);
+
+ struct clk_hw * __init
+ at91_clk_sama7g5_register_master(struct regmap *regmap,
+diff --git a/drivers/clk/at91/sama5d2.c b/drivers/clk/at91/sama5d2.c
+index 3d1f78176c3e..d027294a0089 100644
+--- a/drivers/clk/at91/sama5d2.c
++++ b/drivers/clk/at91/sama5d2.c
+@@ -249,7 +249,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
+ "masterck_pres",
+ &at91sam9x5_master_layout,
+ &mck_characteristics, &mck_lock,
+- CLK_SET_RATE_GATE);
++ CLK_SET_RATE_GATE, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
+index d376257807d2..339d0f382ff0 100644
+--- a/drivers/clk/at91/sama5d3.c
++++ b/drivers/clk/at91/sama5d3.c
+@@ -184,7 +184,7 @@ static void __init sama5d3_pmc_setup(struct device_node *np)
+ "masterck_pres",
+ &at91sam9x5_master_layout,
+ &mck_characteristics, &mck_lock,
+- CLK_SET_RATE_GATE);
++ CLK_SET_RATE_GATE, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+diff --git a/drivers/clk/at91/sama5d4.c b/drivers/clk/at91/sama5d4.c
+index 5cbaac68da44..4af75b1e39e9 100644
+--- a/drivers/clk/at91/sama5d4.c
++++ b/drivers/clk/at91/sama5d4.c
+@@ -199,7 +199,7 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
+ "masterck_pres",
+ &at91sam9x5_master_layout,
+ &mck_characteristics, &mck_lock,
+- CLK_SET_RATE_GATE);
++ CLK_SET_RATE_GATE, 0);
+ if (IS_ERR(hw))
+ goto err_free;
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index ae52c10af040..c66bde6f7b47 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -1003,7 +1003,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+
+ hw = at91_clk_register_master_div(regmap, "mck0", "cpuck",
+ &mck0_layout, &mck0_characteristics,
+- &pmc_mck0_lock, 0);
++ &pmc_mck0_lock, CLK_GET_RATE_NOCACHE, 5);
+ if (IS_ERR(hw))
+ goto err_free;
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/245-clk-at91-sama7g5-remove-prescaler-part-of-master-clo.patch b/target/linux/at91/patches-5.10/245-clk-at91-sama7g5-remove-prescaler-part-of-master-clo.patch
new file mode 100644
index 0000000000..fc0947db8c
--- /dev/null
+++ b/target/linux/at91/patches-5.10/245-clk-at91-sama7g5-remove-prescaler-part-of-master-clo.patch
@@ -0,0 +1,50 @@
+From 91a49481af7332853c4c921d46aded8210572210 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:17 +0300
+Subject: [PATCH 245/247] clk: at91: sama7g5: remove prescaler part of master
+ clock
+
+On SAMA7G5 the prescaler part of master clock has been implemented as a
+changeable one. Everytime the prescaler is changed the PMC_SR.MCKRDY bit
+must be polled. Value 1 for PMC_SR.MCKRDY means the prescaler update is
+done. Driver polls for this bit until it becomes 1. On SAMA7G5 it has
+been discovered that in some conditions the PMC_SR.MCKRDY is not rising
+but the rate it provides it's stable. The workaround is to add a timeout
+when polling for PMC_SR.MCKRDY. At the moment, for SAMA7G5, the prescaler
+will be removed from Linux clock tree as all the frequencies for CPU could
+be obtained from PLL and also there will be less overhead when changing
+frequency via DVFS.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-14-claudiu.beznea@microchip.com
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/sama7g5.c | 11 +----------
+ 1 file changed, 1 insertion(+), 10 deletions(-)
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index c66bde6f7b47..fd9d17eabf54 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -992,16 +992,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
+ }
+
+ parent_names[0] = "cpupll_divpmcck";
+- hw = at91_clk_register_master_pres(regmap, "cpuck", 1, parent_names,
+- &mck0_layout, &mck0_characteristics,
+- &pmc_mck0_lock,
+- CLK_SET_RATE_PARENT, 0);
+- if (IS_ERR(hw))
+- goto err_free;
+-
+- sama7g5_pmc->chws[PMC_CPU] = hw;
+-
+- hw = at91_clk_register_master_div(regmap, "mck0", "cpuck",
++ hw = at91_clk_register_master_div(regmap, "mck0", "cpupll_divpmcck",
+ &mck0_layout, &mck0_characteristics,
+ &pmc_mck0_lock, CLK_GET_RATE_NOCACHE, 5);
+ if (IS_ERR(hw))
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/246-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch b/target/linux/at91/patches-5.10/246-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch
new file mode 100644
index 0000000000..a30173157f
--- /dev/null
+++ b/target/linux/at91/patches-5.10/246-clk-at91-sama7g5-set-low-limit-for-mck0-at-32KHz.patch
@@ -0,0 +1,31 @@
+From 9fd5a49f6da9de5da83f4a53eccefad647ab15ed Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:18 +0300
+Subject: [PATCH 246/247] clk: at91: sama7g5: set low limit for mck0 at 32KHz
+
+MCK0 could go as low as 32KHz. Set this limit.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-15-claudiu.beznea@microchip.com
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/at91/sama7g5.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
+index fd9d17eabf54..369dfafabbca 100644
+--- a/drivers/clk/at91/sama7g5.c
++++ b/drivers/clk/at91/sama7g5.c
+@@ -850,7 +850,7 @@ static const struct {
+
+ /* MCK0 characteristics. */
+ static const struct clk_master_characteristics mck0_characteristics = {
+- .output = { .min = 50000000, .max = 200000000 },
++ .output = { .min = 32768, .max = 200000000 },
+ .divisors = { 1, 2, 4, 3, 5 },
+ .have_div3_pres = 1,
+ };
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/247-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch b/target/linux/at91/patches-5.10/247-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch
new file mode 100644
index 0000000000..103c597856
--- /dev/null
+++ b/target/linux/at91/patches-5.10/247-clk-use-clk_core_get_rate_recalc-in-clk_rate_get.patch
@@ -0,0 +1,37 @@
+From fe07791494a78d5a4be1363385e6ba7940740644 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Mon, 11 Oct 2021 14:27:19 +0300
+Subject: [PATCH 247/247] clk: use clk_core_get_rate_recalc() in clk_rate_get()
+
+In case clock flags contains CLK_GET_RATE_NOCACHE the clk_rate_get()
+will return the cached rate. Thus, use clk_core_get_rate_recalc() which
+takes proper action when clock flags contains CLK_GET_RATE_NOCACHE.
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+Link: https://lore.kernel.org/r/20211011112719.3951784-16-claudiu.beznea@microchip.com
+Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
+[sboyd@kernel.org: Grab prepare lock around operation]
+Signed-off-by: Stephen Boyd <sboyd@kernel.org>
+---
+ drivers/clk/clk.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
+index b8a0e3d23698..6e64332fd26d 100644
+--- a/drivers/clk/clk.c
++++ b/drivers/clk/clk.c
+@@ -3082,7 +3082,10 @@ static int clk_rate_get(void *data, u64 *val)
+ {
+ struct clk_core *core = data;
+
+- *val = core->rate;
++ clk_prepare_lock();
++ *val = clk_core_get_rate_recalc(core);
++ clk_prepare_unlock();
++
+ return 0;
+ }
+
+--
+2.32.0
+
diff --git a/target/linux/at91/patches-5.10/99-scripts-fix-compilation-error.patch b/target/linux/at91/patches-5.10/99-scripts-fix-compilation-error.patch
new file mode 100644
index 0000000000..cd47fe3952
--- /dev/null
+++ b/target/linux/at91/patches-5.10/99-scripts-fix-compilation-error.patch
@@ -0,0 +1,26 @@
+From 6d18eaaaff92f928eab6fad2708b6d28785b4872 Mon Sep 17 00:00:00 2001
+From: Claudiu Beznea <claudiu.beznea@microchip.com>
+Date: Wed, 13 Oct 2021 08:32:07 +0300
+Subject: [PATCH] scripts: fix compilation error
+
+Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
+---
+ scripts/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/scripts/Makefile b/scripts/Makefile
+index 9adb6d247818..035c1fe113ad 100644
+--- a/scripts/Makefile
++++ b/scripts/Makefile
+@@ -21,7 +21,7 @@ HOSTCFLAGS_asn1_compiler.o = -I$(srctree)/include
+ HOSTCFLAGS_sign-file.o = $(CRYPTO_CFLAGS)
+ HOSTLDLIBS_sign-file = $(CRYPTO_LIBS)
+ HOSTCFLAGS_extract-cert.o = $(CRYPTO_CFLAGS)
+-HOSTLDLIBS_extract-cert = $(CRYPTO_LIBS)
++HOSTLDLIBS_extract-cert = $(CRYPTO_LIBS) -lpthread
+
+ ifdef CONFIG_UNWINDER_ORC
+ ifeq ($(ARCH),x86_64)
+--
+2.25.1
+
diff --git a/target/linux/at91/sam9x/config-default b/target/linux/at91/sam9x/config-default
index e3d4c29e99..9f97e7542e 100644
--- a/target/linux/at91/sam9x/config-default
+++ b/target/linux/at91/sam9x/config-default
@@ -21,6 +21,7 @@ CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_ARM_THUMB=y
CONFIG_ARM_UNWIND=y
+# CONFIG_ASN1 is not set
# CONFIG_AT91RM9200_WATCHDOG is not set
CONFIG_AT91SAM9X_WATCHDOG=y
# CONFIG_AT91_ADC is not set
@@ -76,10 +77,8 @@ CONFIG_CRC_CCITT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_ZSTD=y
CONFIG_DEBUG_INFO=y
diff --git a/target/linux/at91/sama5/config-default b/target/linux/at91/sama5/config-default
index e294fd9e3b..0d02dd1922 100644
--- a/target/linux/at91/sama5/config-default
+++ b/target/linux/at91/sama5/config-default
@@ -25,6 +25,7 @@ CONFIG_ARM_PATCH_PHYS_VIRT=y
CONFIG_ARM_THUMB=y
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
+# CONFIG_ASN1 is not set
CONFIG_AT91SAM9X_WATCHDOG=y
CONFIG_AT91_ADC=y
CONFIG_AT91_SAMA5D2_ADC=y
@@ -102,13 +103,11 @@ CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_LIB_SHA256=y
CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
@@ -401,6 +400,7 @@ CONFIG_SND_SOC=y
CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
CONFIG_SND_SOC_I2C_AND_SPI=y
CONFIG_SND_SOC_MIKROE_PROTO=y
+# CONFIG_SND_SOC_PCM5102A is not set
CONFIG_SND_SOC_WM8731=y
CONFIG_SND_SOC_WM8904=y
CONFIG_SND_SPI=y
@@ -411,6 +411,7 @@ CONFIG_SOC_SAMA5=y
CONFIG_SOC_SAMA5D2=y
CONFIG_SOC_SAMA5D3=y
CONFIG_SOC_SAMA5D4=y
+# CONFIG_SOC_SAMA7G5 is not set
CONFIG_SOC_SAM_V7=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
@@ -473,8 +474,6 @@ CONFIG_VFAT_FS=y
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_VIDEOMODE_HELPERS=y
-# CONFIG_VIDEO_ATMEL_ISC is not set
-# CONFIG_VIDEO_ATMEL_ISI is not set
# CONFIG_VIDEO_CPIA2 is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
diff --git a/target/linux/at91/sama7/config-default b/target/linux/at91/sama7/config-default
new file mode 100644
index 0000000000..8c453659dc
--- /dev/null
+++ b/target/linux/at91/sama7/config-default
@@ -0,0 +1,476 @@
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_PATCH_IDIV is not set
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_ASN1=y
+CONFIG_ASSOCIATIVE_ARRAY=y
+CONFIG_ASYMMETRIC_KEY_TYPE=y
+CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
+# CONFIG_AT91SAM9X_WATCHDOG is not set
+# CONFIG_AT91_ADC is not set
+CONFIG_AT91_SAMA5D2_ADC=y
+CONFIG_AT91_SOC_ID=y
+# CONFIG_AT91_SOC_SFR is not set
+CONFIG_ATMEL_CLOCKSOURCE_TCB=y
+# CONFIG_ATMEL_EBI is not set
+CONFIG_ATMEL_SDRAMC=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+# CONFIG_ATMEL_TCLIB is not set
+# CONFIG_AT_HDMAC is not set
+CONFIG_AT_XDMAC=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+# CONFIG_BLK_CGROUP is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_BRIDGE=m
+CONFIG_BT=y
+CONFIG_BT_DEBUGFS=y
+CONFIG_BT_HCIUART=y
+# CONFIG_BT_HCIUART_INTEL is not set
+CONFIG_BT_HCIVHCI=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CAN=y
+CONFIG_CFG80211=m
+CONFIG_CFG80211_CRDA_SUPPORT=y
+CONFIG_CFG80211_DEBUGFS=y
+# CONFIG_CFG80211_DEFAULT_PS is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
+CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
+CONFIG_CFG80211_WEXT=y
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_BPF is not set
+# CONFIG_CGROUP_CPUACCT is not set
+CONFIG_CGROUP_DEBUG=y
+# CONFIG_CGROUP_DEVICE is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_NET_CLASSID is not set
+# CONFIG_CGROUP_NET_PRIO is not set
+# CONFIG_CGROUP_PIDS is not set
+# CONFIG_CGROUP_RDMA is not set
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CLZ_TAB=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=9
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_MBYTES=256
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+CONFIG_CMDLINE="console=ttyS0,115200 earlyprintk nocache ignore_loglevel"
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_AT91=y
+# CONFIG_COMPACTION is not set
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CONTIG_ALLOC=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_SPECTRE=y
+# CONFIG_CPU_SW_DOMAIN_PAN is not set
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRYPTO_CMAC=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_ECC=y
+CONFIG_CRYPTO_ECDH=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_LIB_SHA256=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_RSA=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_AT91_SAMA7G5_FLEXCOM3=y
+CONFIG_DEBUG_AT91_UART=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/at91.S"
+CONFIG_DEBUG_UART_PHYS=0xe1824200
+CONFIG_DEBUG_UART_VIRT=0xe0824200
+# CONFIG_DEBUG_UNCOMPRESS is not set
+CONFIG_DEBUG_USER=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMADEVICES=y
+CONFIG_DMATEST=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_ENGINE_RAID=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_OPS=y
+CONFIG_DMA_REMAP=y
+CONFIG_DTC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EEPROM_AT24=y
+# CONFIG_EFI_PARTITION is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_FAT_FS=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FORCE_MAX_ZONEORDER=15
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_VDSO_32=y
+CONFIG_GLOB=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GRACE_PERIOD=y
+CONFIG_GRO_CELLS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_SMP=y
+CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ_FIXED=0
+CONFIG_I2C=y
+CONFIG_I2C_AT91=y
+# CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL is not set
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_IIO=y
+CONFIG_IIO_BUFFER=y
+CONFIG_IIO_CONFIGFS=y
+# CONFIG_IIO_HRTIMER_TRIGGER is not set
+CONFIG_IIO_KFIFO_BUF=y
+CONFIG_IIO_SW_TRIGGER=y
+# CONFIG_IIO_TIGHTLOOP_TRIGGER is not set
+CONFIG_IIO_TRIGGER=y
+CONFIG_IIO_TRIGGERED_BUFFER=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_BOOTP is not set
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_ISDN_CAPI=y
+CONFIG_JBD2=y
+CONFIG_KEYS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LIBFDT=y
+CONFIG_LLC=m
+CONFIG_LOCKD=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_LSM="N"
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MAC80211=m
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MACB=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_SUPPORT_FILTER=y
+# CONFIG_MEMCG is not set
+CONFIG_MEMFD_CREATE=y
+CONFIG_MEMORY=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
+CONFIG_MFD_AT91_USART=y
+CONFIG_MFD_ATMEL_FLEXCOM=y
+CONFIG_MFD_CORE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MICREL_PHY=y
+CONFIG_MICROCHIP_PIT64B=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_OF_AT91=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MPILIB=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_NAMESPACES=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NEON=y
+# CONFIG_NET_CLS_CGROUP is not set
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=m
+CONFIG_NET_NS=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NFS_FS=y
+# CONFIG_NL80211_TESTMODE is not set
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NVMEM=y
+CONFIG_NVMEM_SYSFS=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OID_REGISTRY=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCCARD=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_PINCTRL_AT91PIO4=y
+CONFIG_PKCS7_MESSAGE_PARSER=y
+# CONFIG_PKCS7_TEST_KEY is not set
+# CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set
+CONFIG_PM_OPP=y
+CONFIG_POWER_RESET=y
+# CONFIG_POWER_RESET_AT91_POWEROFF is not set
+CONFIG_POWER_RESET_AT91_RESET=y
+CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_PWM=y
+CONFIG_PWM_ATMEL=y
+CONFIG_PWM_SYSFS=y
+CONFIG_RATIONAL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGMAP_SPI=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_MCP16502=y
+CONFIG_ROOT_NFS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+# CONFIG_RTL8723BS is not set
+# CONFIG_RUNTIME_TESTING_MENU is not set
+CONFIG_SAMA5D4_WATCHDOG=y
+CONFIG_SCSI=y
+# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
+# CONFIG_SERIAL_ATMEL_TTYAT is not set
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SG_POOL=y
+CONFIG_SND=y
+CONFIG_SND_ATMEL_SOC=y
+# CONFIG_SND_ATMEL_SOC_CLASSD is not set
+# CONFIG_SND_ATMEL_SOC_I2S is not set
+# CONFIG_SND_ATMEL_SOC_PDMIC is not set
+# CONFIG_SND_COMPRESS_OFFLOAD is not set
+CONFIG_SND_DMAENGINE_PCM=y
+CONFIG_SND_JACK=y
+CONFIG_SND_JACK_INPUT_DEV=y
+CONFIG_SND_MCHP_SOC_I2S_MCC=y
+CONFIG_SND_MCHP_SOC_SPDIFRX=y
+CONFIG_SND_MCHP_SOC_SPDIFTX=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_SND_SIMPLE_CARD_UTILS=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+CONFIG_SND_SOC_MIKROE_PROTO=m
+CONFIG_SND_SOC_PCM5102A=y
+CONFIG_SND_SOC_SPDIF=y
+CONFIG_SND_SOC_WM8731=m
+CONFIG_SOC_BUS=y
+# CONFIG_SOC_SAMA5D2 is not set
+# CONFIG_SOC_SAMA5D3 is not set
+# CONFIG_SOC_SAMA5D4 is not set
+CONFIG_SOC_SAMA7=y
+CONFIG_SOC_SAMA7G5=y
+CONFIG_SOC_SAM_V7=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+# CONFIG_SPI_AT91_USART is not set
+CONFIG_SPI_ATMEL=y
+# CONFIG_SPI_ATMEL_QUADSPI is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_SRCU=y
+CONFIG_STACKTRACE=y
+# CONFIG_STANDALONE is not set
+CONFIG_STP=m
+CONFIG_SUNRPC=y
+# CONFIG_SWAP is not set
+CONFIG_SWPHY=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_SYSTEM_DATA_VERIFICATION=y
+# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
+CONFIG_SYSTEM_TRUSTED_KEYRING=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TINY_SRCU=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+# CONFIG_USER_NS is not set
+CONFIG_USE_OF=y
+CONFIG_V4L2_FWNODE=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_VFAT_FS=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_VIDEO_ATMEL_XISC is not set
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_IMX219=m
+CONFIG_VIDEO_IMX274=m
+CONFIG_VIDEO_OV5647=m
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L2_I2C=y
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+# CONFIG_VIRT_WIFI is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_WATCHDOG_CORE=y
+# CONFIG_WFX is not set
+CONFIG_X509_CERTIFICATE_PARSER=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/at91/sama7/target.mk b/target/linux/at91/sama7/target.mk
new file mode 100644
index 0000000000..386c4b9d54
--- /dev/null
+++ b/target/linux/at91/sama7/target.mk
@@ -0,0 +1,9 @@
+BOARDNAME:=SAMA7 boards (Cortex-A7)
+CPU_TYPE:=cortex-a7
+CPU_SUBTYPE:=vfpv4
+FEATURES+=fpu
+
+define Target/Description
+ Build generic firmware for Microchip SAMA7G5 MPUs using the
+ ARMv7 instruction set.
+endef