aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/ath79/dts/qca9563_zte_mf286.dts264
-rw-r--r--target/linux/ath79/dts/qca9563_zte_mf286.dtsi158
-rw-r--r--target/linux/ath79/dts/qca9563_zte_mf286a.dts9
-rw-r--r--target/linux/ath79/dts/qca9563_zte_mf286ar.dtsi134
-rw-r--r--target/linux/ath79/dts/qca9563_zte_mf286r.dts9
-rw-r--r--target/linux/ath79/image/nand.mk29
-rw-r--r--target/linux/ath79/nand/base-files/etc/board.d/02_network4
7 files changed, 406 insertions, 201 deletions
diff --git a/target/linux/ath79/dts/qca9563_zte_mf286.dts b/target/linux/ath79/dts/qca9563_zte_mf286.dts
index c4ebdebd10..2e528a6b97 100644
--- a/target/linux/ath79/dts/qca9563_zte_mf286.dts
+++ b/target/linux/ath79/dts/qca9563_zte_mf286.dts
@@ -1,72 +1,12 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
// Copyright (c) 2021 Cezary Jackiewicz
// Copyright (c) 2021, 2022 Lech Perczak
-#include "qca956x.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
+#include "qca9563_zte_mf286.dtsi"
/ {
model = "ZTE MF286";
compatible = "zte,mf286", "qca,qca9563";
- aliases {
- led-boot = &led_debug;
- led-failsafe = &led_debug;
- led-running = &led_debug;
- led-upgrade = &led_debug;
- label-mac-device = &eth0;
- };
-
- leds {
- compatible = "gpio-leds";
-
- /* Hidden green SMD LED below signal strength LEDs
- * Visible through slits underside of the case,
- * and slightly through the case below signal state LEDs */
- led_debug: led-0 {
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_DEBUG;
- label = "green:debug";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- wifi {
- label = "wifi";
- linux,code = <KEY_RFKILL>;
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- /* This GPIO is used to reset whole board _including_ the modem */
- gpio-restart {
- compatible = "gpio-restart";
- gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
- active-delay = <3000>;
- inactive-delay = <1000>;
- };
-
ubi-concat {
compatible = "mtd-concat";
devices = <&ubiconcat0 &ubiconcat1>;
@@ -84,173 +24,107 @@
};
};
-&gpio {
- /* GPIO19 is used as a mask to enable WLAN LED
- * in stock firmware, which is controlled directly
- * by 5GHz Wi-Fi chip, which currently is inactive
- * in OpenWrt */
- led-wlan {
- gpio-hog;
- gpios = <19 GPIO_ACTIVE_LOW>;
- output-high;
- line-name = "led:wlan";
+&led_debug {
+ /* Hidden green SMD LED below signal strength LEDs
+ * Visible through slits underside of the case,
+ * and slightly through the case below signal state LEDs
+ */
+ color = <LED_COLOR_ID_GREEN>;
+ label = "green:debug";
+};
+
+&boot_flash {
+ partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x080000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "u-boot-env";
+ reg = <0x080000 0x020000>;
+ read-only;
+ };
};
};
-&spi {
- status = "okay";
+&system_flash {
+ partitions {
+ partition@0 {
+ label = "fota-flag";
+ reg = <0x000000 0x140000>;
+ read-only;
+ };
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
+ partition@140000 {
+ label = "caldata";
+ reg = <0x140000 0x140000>;
+ read-only;
- partitions {
- compatible = "fixed-partitions";
+ compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x080000>;
- read-only;
+ cal_caldata_1000: cal@1000 {
+ reg = <0x1000 0x440>;
};
- partition@80000 {
- label = "u-boot-env";
- reg = <0x080000 0x020000>;
- read-only;
+ cal_caldata_5000: cal@5000 {
+ reg = <0x5000 0x844>;
};
};
- };
- flash@1 {
- compatible = "spi-nand";
- reg = <1>;
- spi-max-frequency = <25000000>;
+ partition@280000 {
+ label = "mac";
+ reg = <0x280000 0x140000>;
+ read-only;
- partitions {
- compatible = "fixed-partitions";
+ compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
- partition@0 {
- label = "fota-flag";
- reg = <0x000000 0x140000>;
- read-only;
- };
-
- caldata: partition@140000 {
- label = "caldata";
- reg = <0x140000 0x140000>;
- read-only;
-
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- cal_caldata_1000: cal@1000 {
- reg = <0x1000 0x440>;
- };
-
- cal_caldata_5000: cal@5000 {
- reg = <0x5000 0x844>;
- };
- };
-
- mac: partition@280000 {
- label = "mac";
- reg = <0x280000 0x140000>;
- read-only;
-
- compatible = "nvmem-cells";
- #address-cells = <1>;
- #size-cells = <1>;
-
- macaddr_mac_0: macaddr@0 {
- reg = <0x0 0x6>;
- };
- };
-
- /* This encompasses stock cfg-param, oops, web partitions,
- * which can be overwritten safely */
- ubiconcat0: partition@3c0000 {
- label = "ubiconcat0";
- reg = <0x3c0000 0xf40000>;
- };
-
- /* Kernel MTD size is increased to 4MB from stock 3MB */
- partition@1300000 {
- label = "kernel";
- reg = <0x1300000 0x400000>;
- };
-
- /* This encompasses stock rootfs, data, fota partitions,
- * which can be overwritten safely */
- ubiconcat1: partition@1600000 {
- label = "ubiconcat1";
- reg = <0x1700000 0x6900000>;
+ macaddr_mac_0: macaddr@0 {
+ reg = <0x0 0x6>;
};
};
- };
-};
-&mdio0 {
- status = "okay";
+ /* This encompasses stock cfg-param, oops, web partitions,
+ * which can be overwritten safely
+ */
+ ubiconcat0: partition@3c0000 {
+ label = "ubiconcat0";
+ reg = <0x3c0000 0xf40000>;
+ };
- phy-mask = <0>;
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "sgmii";
+ /* Kernel MTD size is increased to 4MB from stock 3MB */
+ partition@1300000 {
+ label = "kernel";
+ reg = <0x1300000 0x400000>;
+ };
- qca,ar8327-initvals = <
- 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
- 0x7c 0x0000007e /* PORT0_STATUS */
- >;
+ /* This encompasses stock rootfs, data, fota partitions,
+ * which can be overwritten safely
+ */
+ ubiconcat1: partition@1600000 {
+ label = "ubiconcat1";
+ reg = <0x1700000 0x6900000>;
+ };
};
};
&eth0 {
- status = "okay";
-
nvmem-cells = <&macaddr_mac_0>;
nvmem-cell-names = "mac-address";
- phy-mode = "sgmii";
- phy-handle = <&phy0>;
};
-&pcie {
- status = "okay";
-
- wifi@0,0 {
- compatible = "qcom,ath10k";
- reg = <0x0 0 0 0 0>;
-
- nvmem-cells = <&macaddr_mac_0>, <&cal_caldata_5000>;
- nvmem-cell-names = "mac-address", "calibration";
- mac-address-increment = <1>;
- };
+&wifi_ath10k {
+ nvmem-cells = <&macaddr_mac_0>, <&cal_caldata_5000>;
+ nvmem-cell-names = "mac-address", "calibration";
+ mac-address-increment = <1>;
};
&wmac {
- status = "okay";
-
nvmem-cells = <&macaddr_mac_0>, <&cal_caldata_1000>;
nvmem-cell-names = "mac-address", "calibration";
};
-
-&usb_phy0 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
-};
-
-&usb_phy1 {
- status = "okay";
-};
-
-&usb1 {
- status = "okay";
-};
diff --git a/target/linux/ath79/dts/qca9563_zte_mf286.dtsi b/target/linux/ath79/dts/qca9563_zte_mf286.dtsi
new file mode 100644
index 0000000000..3013daa470
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_zte_mf286.dtsi
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (c) 2021 Cezary Jackiewicz
+// Copyright (c) 2021, 2022 Lech Perczak
+#include "qca956x.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ aliases {
+ led-boot = &led_debug;
+ led-failsafe = &led_debug;
+ led-running = &led_debug;
+ led-upgrade = &led_debug;
+ label-mac-device = &eth0;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ /* Hidden SMD LED below signal strength LEDs.
+ * Visible through slits underside of the case,
+ * and slightly through the case below signal state LEDs
+ */
+ led_debug: led-0 {
+ function = LED_FUNCTION_DEBUG;
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+
+ wifi {
+ label = "wifi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ /* This GPIO is used to reset whole board _including_ the modem */
+ gpio-restart {
+ compatible = "gpio-restart";
+ gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
+ active-delay = <3000>;
+ inactive-delay = <1000>;
+ };
+};
+
+&gpio {
+ /* GPIO19 is used as a mask to enable WLAN LED
+ * in stock firmware, which is controlled directly
+ * by 5GHz Wi-Fi chip, which currently is inactive
+ * in OpenWrt
+ */
+ led-wlan {
+ gpio-hog;
+ gpios = <19 GPIO_ACTIVE_LOW>;
+ output-high;
+ line-name = "led:wlan";
+ };
+};
+
+&spi {
+ status = "okay";
+
+ boot_flash: flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+
+ system_flash: flash@1 {
+ compatible = "spi-nand";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy-mask = <0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "sgmii";
+
+ qca,ar8327-initvals = <
+ 0x04 0x00080080 /* PORT0 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ >;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+};
+
+&pcie {
+ status = "okay";
+
+ wifi_ath10k: wifi@0,0 {
+ compatible = "qcom,ath10k";
+ reg = <0x0 0 0 0 0>;
+ };
+};
+
+&wmac {
+ status = "okay";
+};
+
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy1 {
+ status = "okay";
+};
+
+&usb1 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9563_zte_mf286a.dts b/target/linux/ath79/dts/qca9563_zte_mf286a.dts
new file mode 100644
index 0000000000..205dde8030
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_zte_mf286a.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (c) 2021 Cezary Jackiewicz
+// Copyright (c) 2021, 2022 Lech Perczak
+#include "qca9563_zte_mf286ar.dtsi"
+
+/ {
+ model = "ZTE MF286A";
+ compatible = "zte,mf286a", "qca,qca9563";
+};
diff --git a/target/linux/ath79/dts/qca9563_zte_mf286ar.dtsi b/target/linux/ath79/dts/qca9563_zte_mf286ar.dtsi
new file mode 100644
index 0000000000..45ac3bc7ea
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_zte_mf286ar.dtsi
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (c) 2021 Cezary Jackiewicz
+// Copyright (c) 2021, 2022 Lech Perczak
+#include "qca9563_zte_mf286.dtsi"
+
+/ {
+ ubi-concat {
+ compatible = "mtd-concat";
+ devices = <&ubiconcat0 &ubiconcat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ reg = <0x0 0x7a60000>;
+ label = "ubi";
+ };
+ };
+ };
+};
+
+&led_debug {
+ /* Hidden blue SMD LED below signal strength LEDs
+ * Visible through slits underside of the case,
+ * and slightly through the case below signal state LEDs
+ */
+ color = <LED_COLOR_ID_BLUE>;
+ label = "blue:debug";
+};
+
+&boot_flash {
+ partitions {
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x0a0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "u-boot-env";
+ reg = <0x0a0000 0x020000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "reserved1";
+ reg = <0x0c0000 0x140000>;
+ read-only;
+ };
+ };
+};
+
+&system_flash {
+ partitions {
+ partition@0 {
+ label = "fota-flag";
+ reg = <0x00000 0xa0000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "art";
+ reg = <0xa0000 0x80000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cal_art_1000: cal@1000 {
+ reg = <0x1000 0x440>;
+ };
+
+ precal_art_5000: precal@5000 {
+ reg = <0x5000 0x2f20>;
+ };
+ };
+
+ partition@120000 {
+ label = "mac";
+ reg = <0x120000 0x80000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_mac_0: mac-address@0 {
+ reg = <0x0 0x6>;
+ };
+ };
+
+ /* This encompasses stock reserved2, cfg-param, log, oops,
+ * reserved3, web partitions,
+ * which can be overwritten safely
+ */
+ ubiconcat0: partition@1a0000 {
+ label = "ubiconcat0";
+ reg = <0x1a0000 0x1660000>;
+ };
+
+ /* Kernel MTD size is increased to 4MB from stock 3MB */
+ partition@1800000 {
+ label = "kernel";
+ reg = <0x1800000 0x400000>;
+ };
+
+ /* This encompasses stock rootfs, data, fota partitions,
+ * which can be overwritten safely
+ */
+ ubiconcat1: partition@1c00000 {
+ label = "ubiconcat1";
+ reg = <0x1c00000 0x6400000>;
+ };
+ };
+};
+
+&eth0 {
+ nvmem-cells = <&macaddr_mac_0>;
+ nvmem-cell-names = "mac-address";
+};
+
+&wifi_ath10k {
+ nvmem-cells = <&macaddr_mac_0>, <&precal_art_5000>;
+ nvmem-cell-names = "mac-address", "pre-calibration";
+ mac-address-increment = <0x20000>;
+};
+
+&wmac {
+ nvmem-cells = <&macaddr_mac_0>, <&cal_art_1000>;
+ nvmem-cell-names = "mac-address", "calibration";
+};
diff --git a/target/linux/ath79/dts/qca9563_zte_mf286r.dts b/target/linux/ath79/dts/qca9563_zte_mf286r.dts
new file mode 100644
index 0000000000..6fa0f7a7f8
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_zte_mf286r.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+// Copyright (c) 2021 Cezary Jackiewicz
+// Copyright (c) 2021, 2022 Lech Perczak
+#include "qca9563_zte_mf286ar.dtsi"
+
+/ {
+ model = "ZTE MF286R";
+ compatible = "zte,mf286r", "qca,qca9563";
+};
diff --git a/target/linux/ath79/image/nand.mk b/target/linux/ath79/image/nand.mk
index 9f209368e4..0cf8f331d5 100644
--- a/target/linux/ath79/image/nand.mk
+++ b/target/linux/ath79/image/nand.mk
@@ -305,20 +305,39 @@ define Device/netgear_wndr4500-v3
endef
TARGET_DEVICES += netgear_wndr4500-v3
-define Device/zte_mf286
+define Device/zte_mf286_common
SOC := qca9563
DEVICE_VENDOR := ZTE
- DEVICE_MODEL := MF286
- DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct \
- ath10k-firmware-qca988x-ct kmod-usb-net-qmi-wwan kmod-usb-serial-option \
- uqmi
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 4096k
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
endef
+
+define Device/zte_mf286
+ $(Device/zte_mf286_common)
+ DEVICE_MODEL := MF286
+ DEVICE_PACKAGES += ath10k-firmware-qca988x-ct kmod-usb-net-qmi-wwan \
+ kmod-usb-serial-option uqmi
+endef
TARGET_DEVICES += zte_mf286
+define Device/zte_mf286a
+ $(Device/zte_mf286_common)
+ DEVICE_MODEL := MF286A
+ DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-qmi-wwan \
+ kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += zte_mf286a
+
+define Device/zte_mf286r
+ $(Device/zte_mf286_common)
+ DEVICE_MODEL := MF286R
+ DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis kmod-usb-acm
+endef
+TARGET_DEVICES += zte_mf286r
+
define Device/zyxel_nbg6716
SOC := qca9558
DEVICE_VENDOR := ZyXEL
diff --git a/target/linux/ath79/nand/base-files/etc/board.d/02_network b/target/linux/ath79/nand/base-files/etc/board.d/02_network
index 2c6e676ae9..417a881e5b 100644
--- a/target/linux/ath79/nand/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/nand/base-files/etc/board.d/02_network
@@ -45,7 +45,9 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
- zte,mf286)
+ zte,mf286|\
+ zte,mf286a|\
+ zte,mf286r)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "5:lan:1"
;;