diff options
Diffstat (limited to 'target/linux')
46 files changed, 97 insertions, 387 deletions
diff --git a/target/linux/ar71xx/patches-4.14/500-MIPS-fw-myloader.patch b/target/linux/ar71xx/patches-4.14/500-MIPS-fw-myloader.patch index 6789fcf6f2..e0a077c388 100644 --- a/target/linux/ar71xx/patches-4.14/500-MIPS-fw-myloader.patch +++ b/target/linux/ar71xx/patches-4.14/500-MIPS-fw-myloader.patch @@ -10,7 +10,7 @@ --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -1154,6 +1154,9 @@ config MIPS_MSC +@@ -1157,6 +1157,9 @@ config MIPS_MSC config MIPS_NILE4 bool diff --git a/target/linux/ar71xx/patches-4.14/821-serial-core-add-support-for-boot-console-with-arbitr.patch b/target/linux/ar71xx/patches-4.14/821-serial-core-add-support-for-boot-console-with-arbitr.patch deleted file mode 100644 index 3c33cd19cc..0000000000 --- a/target/linux/ar71xx/patches-4.14/821-serial-core-add-support-for-boot-console-with-arbitr.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 4d3c17975c7814884a721fe693b3adf5c426d759 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Tue, 10 Nov 2015 22:18:39 +0100 -Subject: [RFC] serial: core: add support for boot console with arbitrary - baud rates - -The Arduino Yun uses a baud rate of 250000 by default. The serial is -going over the Atmel ATmega and is used to connect to this chip. -Without this patch Linux wants to switch the console to 9600 Baud. - -With this patch Linux will use the configured baud rate and not a -default one specified in uart_register_driver(). - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> -[rebased to 4.14, slightly reworded commit message] -Signed-off-by: Sungbo Eo <mans0n@gorani.run> ---- - drivers/tty/serial/serial_core.c | 6 +++++- - include/linux/console.h | 1 + - 2 files changed, 6 insertions(+), 1 deletions(-) - ---- a/drivers/tty/serial/serial_core.c -+++ b/drivers/tty/serial/serial_core.c -@@ -232,6 +232,8 @@ static int uart_port_startup(struct tty_ - if (retval == 0) { - if (uart_console(uport) && uport->cons->cflag) { - tty->termios.c_cflag = uport->cons->cflag; -+ tty->termios.c_ospeed = uport->cons->baud; -+ tty->termios.c_ispeed = uport->cons->baud; - uport->cons->cflag = 0; - } - /* -@@ -2076,8 +2078,10 @@ uart_set_options(struct uart_port *port, - * Allow the setting of the UART parameters with a NULL console - * too: - */ -- if (co) -+ if (co) { - co->cflag = termios.c_cflag; -+ co->baud = baud; -+ } - - return 0; - } ---- a/include/linux/console.h -+++ b/include/linux/console.h -@@ -145,6 +145,7 @@ struct console { - short flags; - short index; - int cflag; -+ int baud; - void *data; - struct console *next; - }; diff --git a/target/linux/ar71xx/patches-4.14/930-chipidea-pullup.patch b/target/linux/ar71xx/patches-4.14/930-chipidea-pullup.patch index 2e9a878630..0a04d887ba 100644 --- a/target/linux/ar71xx/patches-4.14/930-chipidea-pullup.patch +++ b/target/linux/ar71xx/patches-4.14/930-chipidea-pullup.patch @@ -18,7 +18,7 @@ static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci) --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c -@@ -818,7 +818,7 @@ static inline void ci_role_destroy(struc +@@ -827,7 +827,7 @@ static inline void ci_role_destroy(struc { ci_hdrc_gadget_destroy(ci); ci_hdrc_host_destroy(ci); @@ -27,7 +27,7 @@ ci_hdrc_otg_destroy(ci); } -@@ -923,6 +923,9 @@ static int ci_hdrc_probe(struct platform +@@ -932,6 +932,9 @@ static int ci_hdrc_probe(struct platform CI_HDRC_SUPPORTS_RUNTIME_PM); platform_set_drvdata(pdev, ci); @@ -37,7 +37,7 @@ ret = hw_device_init(ci, base); if (ret < 0) { dev_err(dev, "can't initialize hardware\n"); -@@ -1011,7 +1014,7 @@ static int ci_hdrc_probe(struct platform +@@ -1020,7 +1023,7 @@ static int ci_hdrc_probe(struct platform goto deinit_gadget; } diff --git a/target/linux/ath79/patches-4.14/921-serial-core-add-support-for-boot-console-with-arbitr.patch b/target/linux/ath79/patches-4.14/921-serial-core-add-support-for-boot-console-with-arbitr.patch deleted file mode 100644 index 3c33cd19cc..0000000000 --- a/target/linux/ath79/patches-4.14/921-serial-core-add-support-for-boot-console-with-arbitr.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 4d3c17975c7814884a721fe693b3adf5c426d759 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens <hauke@hauke-m.de> -Date: Tue, 10 Nov 2015 22:18:39 +0100 -Subject: [RFC] serial: core: add support for boot console with arbitrary - baud rates - -The Arduino Yun uses a baud rate of 250000 by default. The serial is -going over the Atmel ATmega and is used to connect to this chip. -Without this patch Linux wants to switch the console to 9600 Baud. - -With this patch Linux will use the configured baud rate and not a -default one specified in uart_register_driver(). - -Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> -[rebased to 4.14, slightly reworded commit message] -Signed-off-by: Sungbo Eo <mans0n@gorani.run> ---- - drivers/tty/serial/serial_core.c | 6 +++++- - include/linux/console.h | 1 + - 2 files changed, 6 insertions(+), 1 deletions(-) - ---- a/drivers/tty/serial/serial_core.c -+++ b/drivers/tty/serial/serial_core.c -@@ -232,6 +232,8 @@ static int uart_port_startup(struct tty_ - if (retval == 0) { - if (uart_console(uport) && uport->cons->cflag) { - tty->termios.c_cflag = uport->cons->cflag; -+ tty->termios.c_ospeed = uport->cons->baud; -+ tty->termios.c_ispeed = uport->cons->baud; - uport->cons->cflag = 0; - } - /* -@@ -2076,8 +2078,10 @@ uart_set_options(struct uart_port *port, - * Allow the setting of the UART parameters with a NULL console - * too: - */ -- if (co) -+ if (co) { - co->cflag = termios.c_cflag; -+ co->baud = baud; -+ } - - return 0; - } ---- a/include/linux/console.h -+++ b/include/linux/console.h -@@ -145,6 +145,7 @@ struct console { - short flags; - short index; - int cflag; -+ int baud; - void *data; - struct console *next; - }; diff --git a/target/linux/bcm53xx/patches-4.14/033-v4.19-0001-ARM-dts-BCM5301X-Make-USB-3.0-PHY-use-MDIO-PHY-drive.patch b/target/linux/bcm53xx/patches-4.14/033-v4.19-0001-ARM-dts-BCM5301X-Make-USB-3.0-PHY-use-MDIO-PHY-drive.patch index 226109c09c..91d630544a 100644 --- a/target/linux/bcm53xx/patches-4.14/033-v4.19-0001-ARM-dts-BCM5301X-Make-USB-3.0-PHY-use-MDIO-PHY-drive.patch +++ b/target/linux/bcm53xx/patches-4.14/033-v4.19-0001-ARM-dts-BCM5301X-Make-USB-3.0-PHY-use-MDIO-PHY-drive.patch @@ -369,7 +369,7 @@ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> axi@18000000 { compatible = "brcm,bus-axi"; reg = <0x18000000 0x1000>; -@@ -359,7 +352,33 @@ +@@ -361,7 +354,33 @@ reg = <0x18003000 0x8>; #size-cells = <1>; #address-cells = <0>; diff --git a/target/linux/bcm53xx/patches-4.14/034-v4.20-0001-ARM-dts-BCM5301X-Specify-flash-partitions.patch b/target/linux/bcm53xx/patches-4.14/034-v4.20-0001-ARM-dts-BCM5301X-Specify-flash-partitions.patch index e6e2522f08..fa22cbf455 100644 --- a/target/linux/bcm53xx/patches-4.14/034-v4.20-0001-ARM-dts-BCM5301X-Specify-flash-partitions.patch +++ b/target/linux/bcm53xx/patches-4.14/034-v4.20-0001-ARM-dts-BCM5301X-Specify-flash-partitions.patch @@ -152,7 +152,7 @@ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> }; --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -475,8 +475,11 @@ +@@ -477,8 +477,11 @@ compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <20000000>; diff --git a/target/linux/bcm53xx/patches-4.14/035-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch b/target/linux/bcm53xx/patches-4.14/035-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch index 5f6dd17dc7..849328a517 100644 --- a/target/linux/bcm53xx/patches-4.14/035-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch +++ b/target/linux/bcm53xx/patches-4.14/035-v4.21-0006-ARM-dts-BCM5301X-Describe-Northstar-pins-mux-control.patch @@ -26,7 +26,7 @@ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> status = "disabled"; }; }; -@@ -391,6 +393,48 @@ +@@ -393,6 +395,48 @@ status = "disabled"; }; diff --git a/target/linux/bcm53xx/patches-4.14/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch b/target/linux/bcm53xx/patches-4.14/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch index d1d287588c..d17d5750e7 100644 --- a/target/linux/bcm53xx/patches-4.14/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch +++ b/target/linux/bcm53xx/patches-4.14/302-ARM-dts-BCM5301X-Update-Northstar-pinctrl-binding.patch @@ -9,7 +9,7 @@ Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -400,16 +400,12 @@ +@@ -402,16 +402,12 @@ #size-cells = <1>; cru@100 { diff --git a/target/linux/brcm2708/patches-4.14/950-0037-Add-dwc_otg-driver.patch b/target/linux/brcm2708/patches-4.14/950-0037-Add-dwc_otg-driver.patch index ef19837e2f..ba94cb8a76 100644 --- a/target/linux/brcm2708/patches-4.14/950-0037-Add-dwc_otg-driver.patch +++ b/target/linux/brcm2708/patches-4.14/950-0037-Add-dwc_otg-driver.patch @@ -841,7 +841,7 @@ Signed-off-by: Malik Olivier Boussejra <malik@boussejra.com> } --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c -@@ -5177,7 +5177,7 @@ static void port_event(struct usb_hub *h +@@ -5187,7 +5187,7 @@ static void port_event(struct usb_hub *h if (portchange & USB_PORT_STAT_C_OVERCURRENT) { u16 status = 0, unused; diff --git a/target/linux/brcm2708/patches-4.14/950-0136-cgroup-Disable-cgroup-memory-by-default.patch b/target/linux/brcm2708/patches-4.14/950-0136-cgroup-Disable-cgroup-memory-by-default.patch index 758d8f81c2..a6609a8ec9 100644 --- a/target/linux/brcm2708/patches-4.14/950-0136-cgroup-Disable-cgroup-memory-by-default.patch +++ b/target/linux/brcm2708/patches-4.14/950-0136-cgroup-Disable-cgroup-memory-by-default.patch @@ -17,7 +17,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c -@@ -5219,6 +5219,9 @@ int __init cgroup_init_early(void) +@@ -5242,6 +5242,9 @@ int __init cgroup_init_early(void) return 0; } @@ -27,7 +27,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> /** * cgroup_init - cgroup initialization * -@@ -5256,6 +5259,12 @@ int __init cgroup_init(void) +@@ -5279,6 +5282,12 @@ int __init cgroup_init(void) mutex_unlock(&cgroup_mutex); @@ -40,7 +40,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> for_each_subsys(ss, ssid) { if (ss->early_init) { struct cgroup_subsys_state *css = -@@ -5637,6 +5646,10 @@ static int __init cgroup_disable(char *s +@@ -5660,6 +5669,10 @@ static int __init cgroup_disable(char *s strcmp(token, ss->legacy_name)) continue; @@ -51,7 +51,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.org> static_branch_disable(cgroup_subsys_enabled_key[i]); pr_info("Disabling %s control group subsystem\n", ss->name); -@@ -5646,6 +5659,31 @@ static int __init cgroup_disable(char *s +@@ -5669,6 +5682,31 @@ static int __init cgroup_disable(char *s } __setup("cgroup_disable=", cgroup_disable); diff --git a/target/linux/brcm2708/patches-4.14/950-0174-drm-vc4-Add-the-DRM_IOCTL_VC4_GEM_MADVISE-ioctl.patch b/target/linux/brcm2708/patches-4.14/950-0174-drm-vc4-Add-the-DRM_IOCTL_VC4_GEM_MADVISE-ioctl.patch index 0e410c484c..8326d4bcad 100644 --- a/target/linux/brcm2708/patches-4.14/950-0174-drm-vc4-Add-the-DRM_IOCTL_VC4_GEM_MADVISE-ioctl.patch +++ b/target/linux/brcm2708/patches-4.14/950-0174-drm-vc4-Add-the-DRM_IOCTL_VC4_GEM_MADVISE-ioctl.patch @@ -181,7 +181,7 @@ Link: https://patchwork.freedesktop.org/patch/msgid/20171019125748.3152-1-boris. enum vc4_kernel_bo_type type) @@ -294,6 +419,9 @@ struct drm_gem_object *vc4_create_object if (!bo) - return ERR_PTR(-ENOMEM); + return NULL; + bo->madv = VC4_MADV_WILLNEED; + refcount_set(&bo->usecnt, 0); diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch index b6d755d29b..a20b9f1c9d 100644 --- a/target/linux/brcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch +++ b/target/linux/brcm63xx/patches-4.14/001-4.15-01-MIPS-BCM63XX-add-clkdev-lookup-support.patch @@ -16,7 +16,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -279,6 +279,7 @@ config BCM63XX +@@ -282,6 +282,7 @@ config BCM63XX select GPIOLIB select HAVE_CLK select MIPS_L1_CACHE_SHIFT_4 @@ -34,7 +34,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> #include <linux/delay.h> #include <bcm63xx_cpu.h> #include <bcm63xx_io.h> -@@ -359,44 +360,103 @@ long clk_round_rate(struct clk *clk, uns +@@ -365,44 +366,103 @@ long clk_round_rate(struct clk *clk, uns } EXPORT_SYMBOL_GPL(clk_round_rate); @@ -176,7 +176,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> #define HSSPI_PLL_HZ_6328 133333333 #define HSSPI_PLL_HZ_6362 400000000 -@@ -404,11 +464,31 @@ EXPORT_SYMBOL(clk_put); +@@ -410,11 +470,31 @@ EXPORT_SYMBOL(clk_put); static int __init bcm63xx_clk_init(void) { switch (bcm63xx_get_cpu_id()) { diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch index 2be6f4c526..fa2b91180e 100644 --- a/target/linux/brcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch +++ b/target/linux/brcm63xx/patches-4.14/001-4.15-02-MIPS-BCM63XX-provide-periph-clock-as-refclk-for-uart.patch @@ -13,7 +13,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- a/arch/mips/bcm63xx/clk.c +++ b/arch/mips/bcm63xx/clk.c -@@ -363,6 +363,8 @@ EXPORT_SYMBOL_GPL(clk_round_rate); +@@ -369,6 +369,8 @@ EXPORT_SYMBOL_GPL(clk_round_rate); static struct clk_lookup bcm3368_clks[] = { /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), @@ -22,7 +22,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -376,6 +378,8 @@ static struct clk_lookup bcm3368_clks[] +@@ -382,6 +384,8 @@ static struct clk_lookup bcm3368_clks[] static struct clk_lookup bcm6328_clks[] = { /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), @@ -31,7 +31,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> /* gated clocks */ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -387,6 +391,7 @@ static struct clk_lookup bcm6328_clks[] +@@ -393,6 +397,7 @@ static struct clk_lookup bcm6328_clks[] static struct clk_lookup bcm6338_clks[] = { /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), @@ -39,7 +39,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -399,6 +404,7 @@ static struct clk_lookup bcm6338_clks[] +@@ -405,6 +410,7 @@ static struct clk_lookup bcm6338_clks[] static struct clk_lookup bcm6345_clks[] = { /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), @@ -47,7 +47,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -411,6 +417,7 @@ static struct clk_lookup bcm6345_clks[] +@@ -417,6 +423,7 @@ static struct clk_lookup bcm6345_clks[] static struct clk_lookup bcm6348_clks[] = { /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), @@ -55,7 +55,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -423,6 +430,8 @@ static struct clk_lookup bcm6348_clks[] +@@ -429,6 +436,8 @@ static struct clk_lookup bcm6348_clks[] static struct clk_lookup bcm6358_clks[] = { /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), @@ -64,7 +64,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -436,6 +445,8 @@ static struct clk_lookup bcm6358_clks[] +@@ -442,6 +451,8 @@ static struct clk_lookup bcm6358_clks[] static struct clk_lookup bcm6362_clks[] = { /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), @@ -73,7 +73,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> /* gated clocks */ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -449,6 +460,8 @@ static struct clk_lookup bcm6362_clks[] +@@ -455,6 +466,8 @@ static struct clk_lookup bcm6362_clks[] static struct clk_lookup bcm6368_clks[] = { /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch index a69998d66c..734fd7e500 100644 --- a/target/linux/brcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch +++ b/target/linux/brcm63xx/patches-4.14/001-4.15-05-MIPS-BCM63XX-move-the-HSSPI-PLL-HZ-into-its-own-cloc.patch @@ -26,7 +26,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> /* * XTM clock -@@ -380,6 +384,7 @@ static struct clk_lookup bcm6328_clks[] +@@ -386,6 +390,7 @@ static struct clk_lookup bcm6328_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), @@ -34,7 +34,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> /* gated clocks */ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -447,6 +452,7 @@ static struct clk_lookup bcm6362_clks[] +@@ -453,6 +458,7 @@ static struct clk_lookup bcm6362_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), @@ -42,7 +42,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> /* gated clocks */ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -481,7 +487,7 @@ static int __init bcm63xx_clk_init(void) +@@ -487,7 +493,7 @@ static int __init bcm63xx_clk_init(void) clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks)); break; case BCM6328_CPU_ID: @@ -51,7 +51,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> clkdev_add_table(bcm6328_clks, ARRAY_SIZE(bcm6328_clks)); break; case BCM6338_CPU_ID: -@@ -497,7 +503,7 @@ static int __init bcm63xx_clk_init(void) +@@ -503,7 +509,7 @@ static int __init bcm63xx_clk_init(void) clkdev_add_table(bcm6358_clks, ARRAY_SIZE(bcm6358_clks)); break; case BCM6362_CPU_ID: diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch index eb30b2daf5..39ce045f7c 100644 --- a/target/linux/brcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch +++ b/target/linux/brcm63xx/patches-4.14/001-4.15-06-MIPS-BCM63XX-provide-enet-clocks-as-enet-to-the-ethe.patch @@ -15,7 +15,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> --- a/arch/mips/bcm63xx/clk.c +++ b/arch/mips/bcm63xx/clk.c -@@ -377,6 +377,8 @@ static struct clk_lookup bcm3368_clks[] +@@ -383,6 +383,8 @@ static struct clk_lookup bcm3368_clks[] CLKDEV_INIT(NULL, "usbd", &clk_usbd), CLKDEV_INIT(NULL, "spi", &clk_spi), CLKDEV_INIT(NULL, "pcm", &clk_pcm), @@ -24,7 +24,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> }; static struct clk_lookup bcm6328_clks[] = { -@@ -404,6 +406,7 @@ static struct clk_lookup bcm6338_clks[] +@@ -410,6 +412,7 @@ static struct clk_lookup bcm6338_clks[] CLKDEV_INIT(NULL, "usbh", &clk_usbh), CLKDEV_INIT(NULL, "usbd", &clk_usbd), CLKDEV_INIT(NULL, "spi", &clk_spi), @@ -32,7 +32,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> }; static struct clk_lookup bcm6345_clks[] = { -@@ -417,6 +420,7 @@ static struct clk_lookup bcm6345_clks[] +@@ -423,6 +426,7 @@ static struct clk_lookup bcm6345_clks[] CLKDEV_INIT(NULL, "usbh", &clk_usbh), CLKDEV_INIT(NULL, "usbd", &clk_usbd), CLKDEV_INIT(NULL, "spi", &clk_spi), @@ -40,7 +40,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> }; static struct clk_lookup bcm6348_clks[] = { -@@ -430,6 +434,8 @@ static struct clk_lookup bcm6348_clks[] +@@ -436,6 +440,8 @@ static struct clk_lookup bcm6348_clks[] CLKDEV_INIT(NULL, "usbh", &clk_usbh), CLKDEV_INIT(NULL, "usbd", &clk_usbd), CLKDEV_INIT(NULL, "spi", &clk_spi), @@ -49,7 +49,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> }; static struct clk_lookup bcm6358_clks[] = { -@@ -445,6 +451,8 @@ static struct clk_lookup bcm6358_clks[] +@@ -451,6 +457,8 @@ static struct clk_lookup bcm6358_clks[] CLKDEV_INIT(NULL, "usbd", &clk_usbd), CLKDEV_INIT(NULL, "spi", &clk_spi), CLKDEV_INIT(NULL, "pcm", &clk_pcm), diff --git a/target/linux/brcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch b/target/linux/brcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch index b5b36e51a4..a59aedaf66 100644 --- a/target/linux/brcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch +++ b/target/linux/brcm63xx/patches-4.14/001-4.15-07-MIPS-BCM63XX-split-out-swpkt_sar-usb-clocks.patch @@ -94,7 +94,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> if (enable) { /* reset sar core afer clock change */ -@@ -451,6 +490,8 @@ static struct clk_lookup bcm6358_clks[] +@@ -457,6 +496,8 @@ static struct clk_lookup bcm6358_clks[] CLKDEV_INIT(NULL, "usbd", &clk_usbd), CLKDEV_INIT(NULL, "spi", &clk_spi), CLKDEV_INIT(NULL, "pcm", &clk_pcm), diff --git a/target/linux/brcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch b/target/linux/brcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch index 65ca97628c..8554976b6f 100644 --- a/target/linux/brcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch +++ b/target/linux/brcm63xx/patches-4.14/339-MIPS-BCM63XX-add-support-for-BCM63268.patch @@ -107,7 +107,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> } static struct clk clk_pcie = { -@@ -536,6 +550,21 @@ static struct clk_lookup bcm6368_clks[] +@@ -542,6 +556,21 @@ static struct clk_lookup bcm6368_clks[] CLKDEV_INIT(NULL, "ipsec", &clk_ipsec), }; @@ -129,7 +129,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> #define HSSPI_PLL_HZ_6328 133333333 #define HSSPI_PLL_HZ_6362 400000000 -@@ -568,6 +597,10 @@ static int __init bcm63xx_clk_init(void) +@@ -574,6 +603,10 @@ static int __init bcm63xx_clk_init(void) case BCM6368_CPU_ID: clkdev_add_table(bcm6368_clks, ARRAY_SIZE(bcm6368_clks)); break; diff --git a/target/linux/brcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch b/target/linux/brcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch index 1b2cbfbf48..9d235f03f1 100644 --- a/target/linux/brcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch +++ b/target/linux/brcm63xx/patches-4.14/341-MIPS-BCM63XX-add-support-for-BCM6318.patch @@ -57,7 +57,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318 mask = CKCTL_6328_HSSPI_EN; else if (BCMCPU_IS_6362()) mask = CKCTL_6362_HSSPI_EN; -@@ -444,6 +446,19 @@ static struct clk_lookup bcm3368_clks[] +@@ -450,6 +452,19 @@ static struct clk_lookup bcm3368_clks[] CLKDEV_INIT("bcm63xx_enet.1", "enet", &clk_enet1), }; @@ -77,7 +77,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318 static struct clk_lookup bcm6328_clks[] = { /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), -@@ -565,6 +580,7 @@ static struct clk_lookup bcm63268_clks[] +@@ -571,6 +586,7 @@ static struct clk_lookup bcm63268_clks[] CLKDEV_INIT(NULL, "pcie", &clk_pcie), }; @@ -85,7 +85,7 @@ Subject: [PATCH 51/53] MIPS: BCM63XX: add support for BCM6318 #define HSSPI_PLL_HZ_6328 133333333 #define HSSPI_PLL_HZ_6362 400000000 -@@ -574,6 +590,10 @@ static int __init bcm63xx_clk_init(void) +@@ -580,6 +596,10 @@ static int __init bcm63xx_clk_init(void) case BCM3368_CPU_ID: clkdev_add_table(bcm3368_clks, ARRAY_SIZE(bcm3368_clks)); break; diff --git a/target/linux/brcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch b/target/linux/brcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch index fe4dbe3e13..45d4b8487c 100644 --- a/target/linux/brcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch +++ b/target/linux/brcm63xx/patches-4.14/389-MIPS-BCM63XX-add-clkdev-lookups-for-device-tree.patch @@ -9,7 +9,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree --- a/arch/mips/bcm63xx/clk.c +++ b/arch/mips/bcm63xx/clk.c -@@ -489,6 +489,8 @@ static struct clk_lookup bcm3368_clks[] +@@ -495,6 +495,8 @@ static struct clk_lookup bcm3368_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), @@ -18,7 +18,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -505,7 +507,9 @@ static struct clk_lookup bcm6318_clks[] +@@ -511,7 +513,9 @@ static struct clk_lookup bcm6318_clks[] /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), @@ -28,7 +28,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -519,7 +523,10 @@ static struct clk_lookup bcm6328_clks[] +@@ -525,7 +529,10 @@ static struct clk_lookup bcm6328_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), @@ -39,7 +39,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -532,6 +539,7 @@ static struct clk_lookup bcm6338_clks[] +@@ -538,6 +545,7 @@ static struct clk_lookup bcm6338_clks[] /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), @@ -47,7 +47,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -546,6 +554,7 @@ static struct clk_lookup bcm6345_clks[] +@@ -552,6 +560,7 @@ static struct clk_lookup bcm6345_clks[] /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), @@ -55,7 +55,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -560,6 +569,7 @@ static struct clk_lookup bcm6348_clks[] +@@ -566,6 +575,7 @@ static struct clk_lookup bcm6348_clks[] /* fixed rate clocks */ CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), @@ -63,7 +63,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -576,6 +586,8 @@ static struct clk_lookup bcm6358_clks[] +@@ -582,6 +592,8 @@ static struct clk_lookup bcm6358_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), @@ -72,7 +72,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enet0", &clk_enet0), CLKDEV_INIT(NULL, "enet1", &clk_enet1), -@@ -595,7 +607,10 @@ static struct clk_lookup bcm6362_clks[] +@@ -601,7 +613,10 @@ static struct clk_lookup bcm6362_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), @@ -83,7 +83,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -611,6 +626,8 @@ static struct clk_lookup bcm6368_clks[] +@@ -617,6 +632,8 @@ static struct clk_lookup bcm6368_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), @@ -92,7 +92,7 @@ Subject: [PATCH] MIPS: BCM63XX: add clkdev lookups for device tree /* gated clocks */ CLKDEV_INIT(NULL, "enetsw", &clk_enetsw), CLKDEV_INIT(NULL, "usbh", &clk_usbh), -@@ -625,7 +642,10 @@ static struct clk_lookup bcm63268_clks[] +@@ -631,7 +648,10 @@ static struct clk_lookup bcm63268_clks[] CLKDEV_INIT(NULL, "periph", &clk_periph), CLKDEV_INIT("bcm63xx_uart.0", "refclk", &clk_periph), CLKDEV_INIT("bcm63xx_uart.1", "refclk", &clk_periph), diff --git a/target/linux/generic/backport-4.14/030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch b/target/linux/generic/backport-4.14/030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch index be733b6d1f..5a0fe0ad1b 100644 --- a/target/linux/generic/backport-4.14/030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch +++ b/target/linux/generic/backport-4.14/030-USB-serial-option-fix-dwm-158-3g-modem-interface.patch @@ -30,7 +30,7 @@ Signed-off-by: Johan Hovold <johan@kernel.org> --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c -@@ -2048,7 +2048,8 @@ static const struct usb_device_id option +@@ -2050,7 +2050,8 @@ static const struct usb_device_id option { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d01, 0xff) }, /* D-Link DWM-156 (variant) */ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d02, 0xff) }, { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d03, 0xff) }, diff --git a/target/linux/generic/backport-4.14/273-batman-adv-Convert-packet.h-to-uapi-header.patch b/target/linux/generic/backport-4.14/273-batman-adv-Convert-packet.h-to-uapi-header.patch index 6d5e4e7c6e..59cccafb91 100644 --- a/target/linux/generic/backport-4.14/273-batman-adv-Convert-packet.h-to-uapi-header.patch +++ b/target/linux/generic/backport-4.14/273-batman-adv-Convert-packet.h-to-uapi-header.patch @@ -12,8 +12,6 @@ packets. Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by: David S. Miller <davem@davemloft.net> ---- - rename net/batman-adv/packet.h => include/uapi/linux/batadv_packet.h (99%) --- a/MAINTAINERS +++ b/MAINTAINERS @@ -237,19 +235,20 @@ Signed-off-by: David S. Miller <davem@davemloft.net> struct net_device; --- a/net/batman-adv/multicast.c +++ b/net/batman-adv/multicast.c -@@ -54,11 +54,11 @@ +@@ -54,12 +54,12 @@ #include <net/if_inet6.h> #include <net/ip.h> #include <net/ipv6.h> +#include <uapi/linux/batadv_packet.h> + #include "bridge_loop_avoidance.h" #include "hard-interface.h" #include "hash.h" #include "log.h" -#include "packet.h" + #include "send.h" #include "translation-table.h" #include "tvlv.h" - --- a/net/batman-adv/netlink.c +++ b/net/batman-adv/netlink.c @@ -39,6 +39,7 @@ diff --git a/target/linux/generic/hack-4.14/301-mips_image_cmdline_hack.patch b/target/linux/generic/hack-4.14/301-mips_image_cmdline_hack.patch index 4d90c07821..3bdce082b0 100644 --- a/target/linux/generic/hack-4.14/301-mips_image_cmdline_hack.patch +++ b/target/linux/generic/hack-4.14/301-mips_image_cmdline_hack.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -1160,6 +1160,10 @@ config SYNC_R4K +@@ -1163,6 +1163,10 @@ config SYNC_R4K config MIPS_MACHINE def_bool n diff --git a/target/linux/generic/hack-4.14/902-debloat_proc.patch b/target/linux/generic/hack-4.14/902-debloat_proc.patch index 4c1018867d..756872818f 100644 --- a/target/linux/generic/hack-4.14/902-debloat_proc.patch +++ b/target/linux/generic/hack-4.14/902-debloat_proc.patch @@ -155,7 +155,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> IPC_SEM_IDS, sysvipc_sem_proc_show); --- a/ipc/shm.c +++ b/ipc/shm.c -@@ -122,6 +122,8 @@ pure_initcall(ipc_ns_init); +@@ -123,6 +123,8 @@ pure_initcall(ipc_ns_init); void __init shm_init(void) { diff --git a/target/linux/generic/hack-4.14/904-debloat_dma_buf.patch b/target/linux/generic/hack-4.14/904-debloat_dma_buf.patch index 9fd8894225..8af4fad459 100644 --- a/target/linux/generic/hack-4.14/904-debloat_dma_buf.patch +++ b/target/linux/generic/hack-4.14/904-debloat_dma_buf.patch @@ -54,7 +54,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> +MODULE_LICENSE("GPL"); --- a/kernel/sched/core.c +++ b/kernel/sched/core.c -@@ -2165,6 +2165,7 @@ int wake_up_state(struct task_struct *p, +@@ -2168,6 +2168,7 @@ int wake_up_state(struct task_struct *p, { return try_to_wake_up(p, state, 0); } diff --git a/target/linux/generic/pending-4.14/300-mips_expose_boot_raw.patch b/target/linux/generic/pending-4.14/300-mips_expose_boot_raw.patch index f305e75650..5caa00ad26 100644 --- a/target/linux/generic/pending-4.14/300-mips_expose_boot_raw.patch +++ b/target/linux/generic/pending-4.14/300-mips_expose_boot_raw.patch @@ -9,7 +9,7 @@ Acked-by: Rob Landley <rob@landley.net> --- --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -1069,9 +1069,6 @@ config FW_ARC +@@ -1072,9 +1072,6 @@ config FW_ARC config ARCH_MAY_HAVE_PC_FDC bool @@ -19,7 +19,7 @@ Acked-by: Rob Landley <rob@landley.net> config CEVT_BCM1480 bool -@@ -2969,6 +2966,18 @@ choice +@@ -2973,6 +2970,18 @@ choice bool "Extend builtin kernel arguments with bootloader arguments" endchoice diff --git a/target/linux/generic/pending-4.14/304-mips_disable_fpu.patch b/target/linux/generic/pending-4.14/304-mips_disable_fpu.patch index c833c685ba..799ce092bd 100644 --- a/target/linux/generic/pending-4.14/304-mips_disable_fpu.patch +++ b/target/linux/generic/pending-4.14/304-mips_disable_fpu.patch @@ -24,7 +24,7 @@ v2: incorporated changes suggested by Jonas Gorski --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -2893,6 +2893,20 @@ config MIPS_O32_FP64_SUPPORT +@@ -2897,6 +2897,20 @@ config MIPS_O32_FP64_SUPPORT If unsure, say N. diff --git a/target/linux/generic/pending-4.14/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch b/target/linux/generic/pending-4.14/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch index 47965c71a3..750df4e7e8 100644 --- a/target/linux/generic/pending-4.14/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch +++ b/target/linux/generic/pending-4.14/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch @@ -22,7 +22,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN -@@ -346,6 +347,7 @@ config MACH_JAZZ +@@ -349,6 +350,7 @@ config MACH_JAZZ select CSRC_R4K select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN select GENERIC_ISA_DMA @@ -30,7 +30,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> select HAVE_PCSPKR_PLATFORM select IRQ_MIPS_CPU select I8253 -@@ -1130,6 +1132,9 @@ config DMA_NONCOHERENT +@@ -1133,6 +1135,9 @@ config DMA_NONCOHERENT bool select NEED_DMA_MAP_STATE @@ -40,7 +40,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> config NEED_DMA_MAP_STATE bool -@@ -1654,6 +1659,7 @@ config CPU_R10000 +@@ -1658,6 +1663,7 @@ config CPU_R10000 select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HUGEPAGES @@ -48,7 +48,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> help MIPS Technologies R10000-series processors. -@@ -1902,9 +1908,11 @@ config SYS_HAS_CPU_MIPS32_R3_5 +@@ -1906,9 +1912,11 @@ config SYS_HAS_CPU_MIPS32_R3_5 bool config SYS_HAS_CPU_MIPS32_R5 @@ -60,7 +60,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name> bool config SYS_HAS_CPU_MIPS64_R1 -@@ -1914,6 +1922,7 @@ config SYS_HAS_CPU_MIPS64_R2 +@@ -1918,6 +1926,7 @@ config SYS_HAS_CPU_MIPS64_R2 bool config SYS_HAS_CPU_MIPS64_R6 diff --git a/target/linux/generic/pending-4.14/834-ledtrig-libata.patch b/target/linux/generic/pending-4.14/834-ledtrig-libata.patch index 4de54e0a8b..1fbdc0c54f 100644 --- a/target/linux/generic/pending-4.14/834-ledtrig-libata.patch +++ b/target/linux/generic/pending-4.14/834-ledtrig-libata.patch @@ -65,7 +65,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> /** * ata_build_rw_tf - Build ATA taskfile for given read/write request * @tf: Target ATA taskfile -@@ -5157,6 +5170,9 @@ struct ata_queued_cmd *ata_qc_new_init(s +@@ -5159,6 +5172,9 @@ struct ata_queued_cmd *ata_qc_new_init(s if (tag < 0) return NULL; } @@ -75,7 +75,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> qc = __ata_qc_from_tag(ap, tag); qc->tag = tag; -@@ -6060,6 +6076,9 @@ struct ata_port *ata_port_alloc(struct a +@@ -6062,6 +6078,9 @@ struct ata_port *ata_port_alloc(struct a ap->stats.unhandled_irq = 1; ap->stats.idle_irq = 1; #endif @@ -85,7 +85,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> ata_sff_port_init(ap); return ap; -@@ -6081,6 +6100,12 @@ static void ata_host_release(struct devi +@@ -6083,6 +6102,12 @@ static void ata_host_release(struct devi kfree(ap->pmp_link); kfree(ap->slave_link); @@ -98,7 +98,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org> kfree(ap); host->ports[i] = NULL; } -@@ -6527,7 +6552,23 @@ int ata_host_register(struct ata_host *h +@@ -6529,7 +6554,23 @@ int ata_host_register(struct ata_host *h host->ports[i]->print_id = atomic_inc_return(&ata_print_id); host->ports[i]->local_port_no = i + 1; } diff --git a/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch b/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch index 0d2a4274c7..23c8581636 100644 --- a/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch +++ b/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch @@ -13,9 +13,9 @@ Signed-off-by: John Crispin <john@phrozen.org> @@ -67,7 +67,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i # macro, but instead defines a whole series of macros which makes # testing for a specific architecture or later rather impossible. - arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m --arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a) + arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m +-arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -march=armv7-a +arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15 - arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6) + arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 -march=armv6 # Only override the compiler option if ARMv6. The ARMv6K extensions are # always available in ARMv7 diff --git a/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch b/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch index 8332202220..0cf957adec 100644 --- a/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch +++ b/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch @@ -1,6 +1,6 @@ --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -2326,6 +2326,12 @@ config MIPS_VPE_LOADER +@@ -2330,6 +2330,12 @@ config MIPS_VPE_LOADER Includes a loader for loading an elf relocatable object onto another VPE and running it. diff --git a/target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch b/target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch index 16926efe93..f8b858aed2 100644 --- a/target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/807-usb-support-layerscape.patch @@ -1226,7 +1226,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> * by reading property in device tree --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c -@@ -689,12 +689,34 @@ void xhci_set_link_state(struct xhci_hcd +@@ -690,12 +690,34 @@ void xhci_set_link_state(struct xhci_hcd int port_id, u32 link_state) { u32 temp; @@ -1289,7 +1289,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> xhci->quirks |= XHCI_BROKEN_PORT_PED; --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c -@@ -2022,10 +2022,12 @@ static int finish_td(struct xhci_hcd *xh +@@ -2029,10 +2029,12 @@ static int finish_td(struct xhci_hcd *xh union xhci_trb *ep_trb, struct xhci_transfer_event *event, struct xhci_virt_ep *ep, int *status) { @@ -1302,7 +1302,7 @@ Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com> u32 trb_comp_code; int ep_index; -@@ -2048,14 +2050,30 @@ static int finish_td(struct xhci_hcd *xh +@@ -2055,14 +2057,30 @@ static int finish_td(struct xhci_hcd *xh if (trb_comp_code == COMP_STALL_ERROR || xhci_requires_manual_halt_cleanup(xhci, ep_ctx, trb_comp_code)) { diff --git a/target/linux/layerscape/patches-4.14/813-ifc-nor-nand-support-layerscape.patch b/target/linux/layerscape/patches-4.14/813-ifc-nor-nand-support-layerscape.patch index 8e9cd1d4a1..47f83c948f 100644 --- a/target/linux/layerscape/patches-4.14/813-ifc-nor-nand-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/813-ifc-nor-nand-support-layerscape.patch @@ -33,7 +33,7 @@ Signed-off-by: Biwen Li <biwen.li@nxp.com> /* * convert_ifc_address - convert the base address -@@ -311,6 +314,261 @@ err: +@@ -310,6 +313,261 @@ err: return ret; } @@ -295,7 +295,7 @@ Signed-off-by: Biwen Li <biwen.li@nxp.com> static const struct of_device_id fsl_ifc_match[] = { { .compatible = "fsl,ifc", -@@ -318,10 +576,15 @@ static const struct of_device_id fsl_ifc +@@ -317,10 +575,15 @@ static const struct of_device_id fsl_ifc {}, }; diff --git a/target/linux/layerscape/patches-4.14/816-pcie-support-layerscape.patch b/target/linux/layerscape/patches-4.14/816-pcie-support-layerscape.patch index d7878e83a0..4317b757ea 100644 --- a/target/linux/layerscape/patches-4.14/816-pcie-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.14/816-pcie-support-layerscape.patch @@ -5604,7 +5604,7 @@ Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> * them, we have to fall back to INTx or other interrupts, e.g., a --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c -@@ -3431,6 +3431,13 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_A +@@ -3432,6 +3432,13 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_A */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0xb005, quirk_no_bus_reset); diff --git a/target/linux/mvebu/patches-4.14/508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch b/target/linux/mvebu/patches-4.14/508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch index 6395a3573d..9d9bb540fc 100644 --- a/target/linux/mvebu/patches-4.14/508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch +++ b/target/linux/mvebu/patches-4.14/508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch @@ -20,7 +20,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -100,6 +100,33 @@ +@@ -103,6 +103,33 @@ status = "okay"; }; diff --git a/target/linux/mvebu/patches-4.14/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch b/target/linux/mvebu/patches-4.14/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch index 19702a61ed..119354080d 100644 --- a/target/linux/mvebu/patches-4.14/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch +++ b/target/linux/mvebu/patches-4.14/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch @@ -1,4 +1,4 @@ -From eefe328439642101774f0f5c4ea0dc6ba1cfb687 Mon Sep 17 00:00:00 2001 +From d2314a5265eb43e754a26050caa2b31527cc1770 Mon Sep 17 00:00:00 2001 From: Ding Tao <miyatsu@qq.com> Date: Fri, 26 Oct 2018 11:50:27 +0000 Subject: [PATCH] arm64: dts: marvell: armada37xx: Add emmc/sdio pinctrl @@ -35,6 +35,6 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> + function = "sdio"; + }; + - }; - - eth0: ethernet@30000 { + pcie_reset_pins: pcie-reset-pins { + groups = "pcie1"; + function = "gpio"; diff --git a/target/linux/mvebu/patches-4.14/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch b/target/linux/mvebu/patches-4.14/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch index 77d9956fff..1ea710ae1e 100644 --- a/target/linux/mvebu/patches-4.14/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch +++ b/target/linux/mvebu/patches-4.14/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch @@ -15,7 +15,7 @@ Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -97,9 +97,31 @@ +@@ -100,9 +100,31 @@ cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; marvell,pad-type = "sd"; vqmmc-supply = <&vcc_sd_reg1>; diff --git a/target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch b/target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch index 5c3f214d1e..373879ee2a 100644 --- a/target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch +++ b/target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch @@ -29,7 +29,7 @@ Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -127,25 +127,9 @@ +@@ -130,25 +130,9 @@ flash@0 { reg = <0>; diff --git a/target/linux/mvebu/patches-4.14/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch b/target/linux/mvebu/patches-4.14/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch index bef9c40286..b0cf062c95 100644 --- a/target/linux/mvebu/patches-4.14/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch +++ b/target/linux/mvebu/patches-4.14/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch @@ -15,7 +15,7 @@ Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -157,7 +157,7 @@ +@@ -160,7 +160,7 @@ dsa,member = <0 0>; diff --git a/target/linux/mvebu/patches-4.14/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch b/target/linux/mvebu/patches-4.14/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch deleted file mode 100644 index ab643b776f..0000000000 --- a/target/linux/mvebu/patches-4.14/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch +++ /dev/null @@ -1,138 +0,0 @@ -From patchwork Thu Sep 28 12:58:34 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [v2, - 3/7] PCI: aardvark: set host and device to the same MAX payload size -X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> -X-Patchwork-Id: 819587 -Message-Id: <20170928125838.11887-4-thomas.petazzoni@free-electrons.com> -To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org -Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, - Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement - <gregory.clement@free-electrons.com>, - Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>, - Yehuda Yitschak <yehuday@marvell.com>, - linux-arm-kernel@lists.infradead.org, Antoine Tenart - <antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?= - <miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>, - Thomas Petazzoni <thomas.petazzoni@free-electrons.com> -Date: Thu, 28 Sep 2017 14:58:34 +0200 -From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> -List-Id: <linux-pci.vger.kernel.org> - -From: Victor Gu <xigu@marvell.com> - -Since the Aardvark does not implement a PCIe root bus, the Linux PCIe -subsystem will not align the MAX payload size between the host and the -device. This patch ensures that the host and device have the same MAX -payload size, fixing a number of problems with various PCIe devices. - -This is part of fixing bug -https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was -reported as the user to be important to get a Intel 7260 mini-PCIe -WiFi card working. - -Fixes: Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver") -Signed-off-by: Victor Gu <xigu@marvell.com> -Reviewed-by: Evan Wang <xswang@marvell.com> -Reviewed-by: Nadav Haklai <nadavh@marvell.com> -[Thomas: tweak commit log.] -Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> ---- - drivers/pci/host/pci-aardvark.c | 60 ++++++++++++++++++++++++++++++++++++++++- - 1 file changed, 59 insertions(+), 1 deletion(-) - ---- a/drivers/pci/host/pci-aardvark.c -+++ b/drivers/pci/host/pci-aardvark.c -@@ -30,9 +30,11 @@ - #define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8 - #define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4) - #define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT 5 -+#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ 0x2 - #define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11) - #define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT 12 - #define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ 0x2 -+#define PCIE_CORE_MPS_UNIT_BYTE 128 - #define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0 - #define PCIE_CORE_LINK_L0S_ENTRY BIT(0) - #define PCIE_CORE_LINK_TRAINING BIT(5) -@@ -300,7 +302,8 @@ static void advk_pcie_setup_hw(struct ad - - /* Set PCIe Device Control and Status 1 PF0 register */ - reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE | -- (7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) | -+ (PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ << -+ PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) | - PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE | - (PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ << - PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT); -@@ -968,6 +971,58 @@ out_release_res: - return err; - } - -+static int advk_pcie_find_smpss(struct pci_dev *dev, void *data) -+{ -+ u8 *smpss = data; -+ -+ if (!dev) -+ return 0; -+ -+ if (!pci_is_pcie(dev)) -+ return 0; -+ -+ if (*smpss > dev->pcie_mpss) -+ *smpss = dev->pcie_mpss; -+ -+ return 0; -+} -+ -+static int advk_pcie_bus_configure_mps(struct pci_dev *dev, void *data) -+{ -+ int mps; -+ -+ if (!dev) -+ return 0; -+ -+ if (!pci_is_pcie(dev)) -+ return 0; -+ -+ mps = PCIE_CORE_MPS_UNIT_BYTE << *(u8 *)data; -+ pcie_set_mps(dev, mps); -+ -+ return 0; -+} -+ -+static void advk_pcie_configure_mps(struct pci_bus *bus, struct advk_pcie *pcie) -+{ -+ u8 smpss = PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ; -+ u32 reg; -+ -+ /* Find the minimal supported MAX payload size */ -+ advk_pcie_find_smpss(bus->self, &smpss); -+ pci_walk_bus(bus, advk_pcie_find_smpss, &smpss); -+ -+ /* Configure RC MAX payload size */ -+ reg = advk_readl(pcie, PCIE_CORE_DEV_CTRL_STATS_REG); -+ reg &= ~PCI_EXP_DEVCTL_PAYLOAD; -+ reg |= smpss << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT; -+ advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG); -+ -+ /* Configure device MAX payload size */ -+ advk_pcie_bus_configure_mps(bus->self, &smpss); -+ pci_walk_bus(bus, advk_pcie_bus_configure_mps, &smpss); -+} -+ - static int advk_pcie_probe(struct platform_device *pdev) - { - struct device *dev = &pdev->dev; -@@ -1042,6 +1097,9 @@ static int advk_pcie_probe(struct platfo - list_for_each_entry(child, &bus->children, node) - pcie_bus_configure_settings(child); - -+ /* Configure the MAX pay load size */ -+ advk_pcie_configure_mps(bus, pcie); -+ - pci_bus_add_devices(bus); - return 0; - } diff --git a/target/linux/mvebu/patches-4.14/527-PCI-aardvark-allow-to-specify-link-capability.patch b/target/linux/mvebu/patches-4.14/527-PCI-aardvark-allow-to-specify-link-capability.patch deleted file mode 100644 index 3360123775..0000000000 --- a/target/linux/mvebu/patches-4.14/527-PCI-aardvark-allow-to-specify-link-capability.patch +++ /dev/null @@ -1,43 +0,0 @@ -From f70b629e488cc3f2a325ac35476f4f7ae502c5d0 Mon Sep 17 00:00:00 2001 -From: Tomasz Maciej Nowak <tmn505@gmail.com> -Date: Thu, 14 Jun 2018 14:24:40 +0200 -Subject: [PATCH 1/2] PCI: aardvark: allow to specify link capability - -Use DT of_pci_get_max_link_speed() facility to allow specifying link -capability. If none or unspecified value is given it falls back to gen2, -which is default for Armada 3700 SoC. - -Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> ---- - drivers/pci/host/pci-aardvark.c | 11 +++++++++-- - 1 file changed, 9 insertions(+), 2 deletions(-) - ---- a/drivers/pci/host/pci-aardvark.c -+++ b/drivers/pci/host/pci-aardvark.c -@@ -275,6 +275,8 @@ static void advk_pcie_set_ob_win(struct - - static void advk_pcie_setup_hw(struct advk_pcie *pcie) - { -+ struct device *dev = &pcie->pdev->dev; -+ struct device_node *node = dev->of_node; - u32 reg; - int i; - -@@ -314,10 +316,15 @@ static void advk_pcie_setup_hw(struct ad - PCIE_CORE_CTRL2_TD_ENABLE; - advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG); - -- /* Set GEN2 */ -+ /* Set GEN */ - reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); - reg &= ~PCIE_GEN_SEL_MSK; -- reg |= SPEED_GEN_2; -+ if (of_pci_get_max_link_speed(node) == 1) -+ reg |= SPEED_GEN_1; -+ else if (of_pci_get_max_link_speed(node) == 3) -+ reg |= SPEED_GEN_3; -+ else -+ reg |= SPEED_GEN_2; - advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); - - /* Set lane X1 */ diff --git a/target/linux/mvebu/patches-4.14/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch b/target/linux/mvebu/patches-4.14/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch index 6ce49f71f0..ce67cd94c9 100644 --- a/target/linux/mvebu/patches-4.14/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch +++ b/target/linux/mvebu/patches-4.14/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch @@ -62,9 +62,9 @@ Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts -@@ -83,6 +83,8 @@ - /* J9 */ - &pcie0 { +@@ -86,6 +86,8 @@ + pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>; + reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>; status = "okay"; + + max-link-speed = <1>; diff --git a/target/linux/oxnas/patches-4.14/999-libata-hacks.patch b/target/linux/oxnas/patches-4.14/999-libata-hacks.patch index 730439e03d..77d4728f5b 100644 --- a/target/linux/oxnas/patches-4.14/999-libata-hacks.patch +++ b/target/linux/oxnas/patches-4.14/999-libata-hacks.patch @@ -15,7 +15,7 @@ /* initialize internal qc */ /* XXX: Tag 0 is used for drivers with legacy EH as some -@@ -5164,6 +5172,9 @@ struct ata_queued_cmd *ata_qc_new_init(s +@@ -5166,6 +5174,9 @@ struct ata_queued_cmd *ata_qc_new_init(s if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) return NULL; @@ -25,7 +25,7 @@ /* libsas case */ if (ap->flags & ATA_FLAG_SAS_HOST) { tag = ata_sas_allocate_tag(ap); -@@ -5209,6 +5220,8 @@ void ata_qc_free(struct ata_queued_cmd * +@@ -5211,6 +5222,8 @@ void ata_qc_free(struct ata_queued_cmd * qc->tag = ATA_TAG_POISON; if (ap->flags & ATA_FLAG_SAS_HOST) ata_sas_free_tag(tag, ap); diff --git a/target/linux/ramips/patches-4.14/0025-pinctrl-ralink-add-pinctrl-driver.patch b/target/linux/ramips/patches-4.14/0025-pinctrl-ralink-add-pinctrl-driver.patch index a374e01b59..ab008f287e 100644 --- a/target/linux/ramips/patches-4.14/0025-pinctrl-ralink-add-pinctrl-driver.patch +++ b/target/linux/ramips/patches-4.14/0025-pinctrl-ralink-add-pinctrl-driver.patch @@ -14,7 +14,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -629,6 +629,8 @@ config RALINK +@@ -632,6 +632,8 @@ config RALINK select CLKDEV_LOOKUP select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER diff --git a/target/linux/ramips/patches-4.14/0028-GPIO-ralink-add-mt7621-gpio-controller.patch b/target/linux/ramips/patches-4.14/0028-GPIO-ralink-add-mt7621-gpio-controller.patch index debeae2806..f6ab5354dc 100644 --- a/target/linux/ramips/patches-4.14/0028-GPIO-ralink-add-mt7621-gpio-controller.patch +++ b/target/linux/ramips/patches-4.14/0028-GPIO-ralink-add-mt7621-gpio-controller.patch @@ -14,7 +14,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -631,6 +631,9 @@ config RALINK +@@ -634,6 +634,9 @@ config RALINK select RESET_CONTROLLER select PINCTRL select PINCTRL_RT2880 diff --git a/target/linux/ramips/patches-4.14/0051-serial-add-ugly-custom-baud-rate-hack.patch b/target/linux/ramips/patches-4.14/0051-serial-add-ugly-custom-baud-rate-hack.patch index 2ad1f6f9f8..19a020abd9 100644 --- a/target/linux/ramips/patches-4.14/0051-serial-add-ugly-custom-baud-rate-hack.patch +++ b/target/linux/ramips/patches-4.14/0051-serial-add-ugly-custom-baud-rate-hack.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c -@@ -428,6 +428,9 @@ uart_get_baud_rate(struct uart_port *por +@@ -435,6 +435,9 @@ uart_get_baud_rate(struct uart_port *por break; } diff --git a/target/linux/ramips/patches-4.14/0098-disable_cm.patch b/target/linux/ramips/patches-4.14/0098-disable_cm.patch index bc00619dff..4fb198434d 100644 --- a/target/linux/ramips/patches-4.14/0098-disable_cm.patch +++ b/target/linux/ramips/patches-4.14/0098-disable_cm.patch @@ -1,6 +1,6 @@ --- a/arch/mips/kernel/mips-cm.c +++ b/arch/mips/kernel/mips-cm.c -@@ -237,6 +237,7 @@ int mips_cm_probe(void) +@@ -236,6 +236,7 @@ int mips_cm_probe(void) /* disable CM regions */ write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR); @@ -8,7 +8,7 @@ write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK); write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR); write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK); -@@ -244,7 +245,7 @@ int mips_cm_probe(void) +@@ -243,7 +244,7 @@ int mips_cm_probe(void) write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK); write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR); write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK); |