aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/kirkwood/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/kirkwood/base-files/etc/board.d/02_network2
-rwxr-xr-xtarget/linux/kirkwood/base-files/lib/kirkwood.sh4
-rw-r--r--target/linux/kirkwood/image/Makefile9
-rw-r--r--target/linux/kirkwood/patches-4.4/194-nsa325.patch238
5 files changed, 254 insertions, 2 deletions
diff --git a/target/linux/kirkwood/base-files/etc/board.d/01_leds b/target/linux/kirkwood/base-files/etc/board.d/01_leds
index 4518fc4b64..e6da9fd49a 100755
--- a/target/linux/kirkwood/base-files/etc/board.d/01_leds
+++ b/target/linux/kirkwood/base-files/etc/board.d/01_leds
@@ -41,6 +41,9 @@ case "$board" in
"nsa310b")
ucidef_set_led_default "health" "health" "nsa310:green:sys" "1"
;;
+"nsa325")
+ ucidef_set_led_default "health" "health" "nsa325:green:sys" "1"
+ ;;
"sheevaplug" | \
"sheevaplug-esata")
ucidef_set_led_timer "health" "health" "sheevaplug:blue:health" "200" "800"
diff --git a/target/linux/kirkwood/base-files/etc/board.d/02_network b/target/linux/kirkwood/base-files/etc/board.d/02_network
index b5406b0e37..b82086ec3e 100755
--- a/target/linux/kirkwood/base-files/etc/board.d/02_network
+++ b/target/linux/kirkwood/base-files/etc/board.d/02_network
@@ -30,7 +30,7 @@ case "$board" in
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" "6@eth1"
;;
-"nsa310b")
+"nsa310b"|"nsa325")
ucidef_set_interface_lan "eth0" "dhcp"
ucidef_set_interface_macaddr "lan" $( mtd_get_mac_ascii uboot_env ethaddr )
;;
diff --git a/target/linux/kirkwood/base-files/lib/kirkwood.sh b/target/linux/kirkwood/base-files/lib/kirkwood.sh
index f0efec4994..2c7d7baf4b 100755
--- a/target/linux/kirkwood/base-files/lib/kirkwood.sh
+++ b/target/linux/kirkwood/base-files/lib/kirkwood.sh
@@ -65,6 +65,10 @@ kirkwood_board_detect() {
name="nsa310s"
;;
+ "ZyXEL NSA325")
+ name="nsa325"
+ ;;
+
*)
name="generic"
;;
diff --git a/target/linux/kirkwood/image/Makefile b/target/linux/kirkwood/image/Makefile
index ece7c1adf6..141505e002 100644
--- a/target/linux/kirkwood/image/Makefile
+++ b/target/linux/kirkwood/image/Makefile
@@ -11,7 +11,7 @@ include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
KERNEL_LOADADDR:=0x8000
-TARGET_DEVICES = linksys-audi linksys-viper dockstar goflexnet goflexhome iconnect pogo_e02 ib62x0 nsa310b
+TARGET_DEVICES = linksys-audi linksys-viper dockstar goflexnet goflexhome iconnect pogo_e02 ib62x0 nsa310b nsa325
UBI_OPTS := -m 2048 -p 128KiB -s 512
UBIFS_OPTS := -m 2048 -e 126KiB -c 4096
@@ -87,6 +87,13 @@ $(Device/dockstar)
DEVICE_PACKAGES := kmod-r8169 kmod-gpio-button-hotplug kmod-hwmon-lm85
endef
+define Device/nsa325
+$(Device/dockstar)
+ DEVICE_TITLE := ZyXEL NSA325 (v1 and v2)
+ DEVICE_DTS := kirkwood-nsa325
+ DEVICE_PACKAGES := kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
+endef
+
define Device/pogo_e02
$(Device/dockstar)
DEVICE_TITLE := Cloud Engines Pogoplug E02
diff --git a/target/linux/kirkwood/patches-4.4/194-nsa325.patch b/target/linux/kirkwood/patches-4.4/194-nsa325.patch
new file mode 100644
index 0000000000..8e5cd7759e
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.4/194-nsa325.patch
@@ -0,0 +1,238 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -205,6 +205,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-nsa310a.dtb \
+ kirkwood-nsa310b.dtb \
+ kirkwood-nsa310s.dtb \
++ kirkwood-nsa325.dtb \
+ kirkwood-openblocks_a6.dtb \
+ kirkwood-openblocks_a7.dtb \
+ kirkwood-openrd-base.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/kirkwood-nsa325.dts
+@@ -0,0 +1,225 @@
++/*
++ * Device tree file for Zyxel NSA325 and NSA325v2 NAS
++ */
++/dts-v1/;
++#include "kirkwood-nsa3x0-common.dtsi"
++
++/ {
++ model = "ZyXEL NSA325";
++ compatible = "zyxel,nsa325", "marvell,kirkwood-88f6282", "marvell,kirkwood";
++
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x20000000>;
++ };
++
++ chosen {
++ bootargs = "console=ttyS0,115200";
++ stdout-path = &uart0;
++ };
++
++ mbus {
++ pcie-controller {
++ status = "okay";
++
++ pcie@1,0 {
++ status = "okay";
++ };
++ };
++ };
++
++ ocp@f1000000 {
++ pinctrl: pin-controller@10000 {
++ pinctrl-names = "default";
++
++ pmx_led_sata2_green: pmx-led-sata2-green {
++ marvell,pins = "mpp12";
++ marvell,function = "gpio";
++ };
++
++ pmx_led_sata2_red: pmx-led-sata2-red {
++ marvell,pins = "mpp13";
++ marvell,function = "gpio";
++ };
++
++ pmx_mcu_data: pmx-mcu-data {
++ marvell,pins = "mpp14";
++ marvell,function = "gpio";
++ };
++
++ pmx_led_usb_green: pmx-led-usb-green {
++ marvell,pins = "mpp15";
++ marvell,function = "gpio";
++ };
++
++ pmx_mcu_clk: pmx-mcu-clk {
++ marvell,pins = "mpp16";
++ marvell,function = "gpio";
++ };
++
++ pmx_mcu_act: pmx-mcu-act {
++ marvell,pins = "mpp17";
++ marvell,function = "gpio";
++ };
++
++ pmx_usb_power_off: pmx-usb-power-off {
++ marvell,pins = "mpp21";
++ marvell,function = "gpio";
++ };
++
++ pmx_led_sys_green: pmx-led-sys-green {
++ marvell,pins = "mpp28";
++ marvell,function = "gpio";
++ };
++
++ pmx_led_sys_orange: pmx-led-sys-orange {
++ marvell,pins = "mpp29";
++ marvell,function = "gpio";
++ };
++
++ pmx_led_sata1_green: pmx-led-sata1-green {
++ marvell,pins = "mpp41";
++ marvell,function = "gpio";
++ };
++
++ pmx_led_sata1_red: pmx-led-sata1-red {
++ marvell,pins = "mpp42";
++ marvell,function = "gpio";
++ };
++
++ pmx_beeper: pmx-beeper {
++ marvell,pins = "mpp44";
++ marvell,function = "gpio";
++ };
++
++ pmx_pwr_sata1: pmx-pwr-sata1 {
++ marvell,pins = "mpp47";
++ marvell,function = "gpio";
++ };
++
++ };
++
++ /* This board uses the pcf8563 RTC instead of the SoC RTC */
++ rtc@10300 {
++ status = "disabled";
++ };
++
++ i2c@11000 {
++ status = "okay";
++
++ pcf8563: pcf8563@51 {
++ compatible = "nxp,pcf8563";
++ reg = <0x51>;
++ };
++ };
++
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++ pinctrl-0 = <&pmx_led_sata1_green &pmx_led_sata1_red
++ &pmx_led_sata2_green &pmx_led_sata2_red
++ &pmx_led_sys_green &pmx_led_sys_orange
++ &pmx_led_copy_green &pmx_led_copy_red
++ &pmx_led_usb_green>;
++ pinctrl-names = "default";
++
++ green-sata2 {
++ label = "nsa325:green:sata2";
++ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "ide-disk2";
++ };
++
++ red-sata2 {
++ label = "nsa325:red:sata2";
++ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
++ };
++
++ green-usb {
++ label = "nsa325:green:usb";
++ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "usb-host";
++ };
++
++ green-sys {
++ label = "nsa325:green:sys";
++ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-on";
++ };
++
++ orange-sys {
++ label = "nsa325:orange:sys";
++ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "cpu0";
++ };
++
++ green-copy {
++ label = "nsa325:green:copy";
++ gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
++ };
++
++ red-copy {
++ label = "nsa325:red:copy";
++ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
++ };
++
++ green-sata1 {
++ label = "nsa325:green:sata1";
++ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "ide-disk1";
++ };
++
++ red-sata1 {
++ label = "nsa325:red:sata1";
++ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ regulators {
++ compatible = "simple-bus";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ pinctrl-0 = <&pmx_usb_power_off &pmx_pwr_sata1>;
++ pinctrl-names = "default";
++
++ usb_power: regulator@1 {
++ compatible = "regulator-fixed";
++ reg = <1>;
++ regulator-name = "USB Power";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-always-on;
++ regulator-boot-on;
++ enable-active-high;
++ gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
++ };
++
++ sata1_power: regulator@2 {
++ compatible = "regulator-fixed";
++ reg = <2>;
++ regulator-name = "SATA Power";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ regulator-always-on;
++ regulator-boot-on;
++ enable-active-high;
++ gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
++ };
++ };
++};
++
++&mdio {
++ status = "okay";
++
++ ethphy0: ethernet-phy@1 {
++ reg = <1>;
++ };
++};
++
++&eth0 {
++ status = "okay";
++
++ ethernet0-port@0 {
++ phy-handle = <&ethphy0>;
++ };
++};
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 04:41:46 +0000