diff options
Diffstat (limited to 'target/linux')
5 files changed, 0 insertions, 890 deletions
diff --git a/target/linux/orion/config-3.18 b/target/linux/orion/config-3.18 deleted file mode 100644 index 4c816be22b..0000000000 --- a/target/linux/orion/config-3.18 +++ /dev/null @@ -1,187 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_ORION5X=y -# CONFIG_ARCH_ORION5X_DT is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARM=y -# CONFIG_ARM_CPU_SUSPEND is not set -CONFIG_ARM_L1_CACHE_SHIFT=5 -CONFIG_ARM_NR_BANKS=8 -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_THUMB is not set -# CONFIG_ARPD is not set -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -# CONFIG_CACHE_L2X0 is not set -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200" -CONFIG_CMDLINE_FORCE=y -CONFIG_COMMON_CLK=y -CONFIG_CPU_32v5=y -CONFIG_CPU_ABRT_EV5T=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_FEROCEON=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FEROCEON=y -CONFIG_CPU_FEROCEON_OLD_ID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_PABRT_LEGACY=y -CONFIG_CPU_TLB_FEROCEON=y -CONFIG_CPU_USE_DOMAINS=y -CONFIG_CRYPTO_DEV_MV_CESA=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set -CONFIG_DEBUG_UART_8250_SHIFT=2 -# CONFIG_DEBUG_UART_8250_WORD is not set -CONFIG_DEBUG_UART_PHYS=0xf1012000 -CONFIG_DEBUG_UART_VIRT=0xfe012000 -# CONFIG_DEBUG_USER is not set -CONFIG_DNOTIFY=y -CONFIG_FRAME_POINTER=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_GPIO_SYSFS=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_WORK=y -CONFIG_KTIME_SCALAR=y -CONFIG_LEDS_GPIO=y -# CONFIG_MACH_BIGDISK is not set -# CONFIG_MACH_D2NET is not set -# CONFIG_MACH_D2NET_DT is not set -# CONFIG_MACH_DB88F5281 is not set -# CONFIG_MACH_DNS323 is not set -# CONFIG_MACH_DT2 is not set -# CONFIG_MACH_EDMINI_V2_DT is not set -# CONFIG_MACH_KUROBOX_PRO is not set -# CONFIG_MACH_LINKSTATION_LSCHL is not set -# CONFIG_MACH_LINKSTATION_LS_HGL is not set -# CONFIG_MACH_LINKSTATION_MINI is not set -# CONFIG_MACH_LINKSTATION_PRO is not set -# CONFIG_MACH_MSS2 is not set -# CONFIG_MACH_MSS2_DT is not set -# CONFIG_MACH_MV2120 is not set -# CONFIG_MACH_NET2BIG is not set -# CONFIG_MACH_RD88F5181L_FXO is not set -# CONFIG_MACH_RD88F5181L_GE is not set -# CONFIG_MACH_RD88F5182 is not set -# CONFIG_MACH_RD88F5182_DT is not set -# CONFIG_MACH_RD88F6183AP_GE is not set -# CONFIG_MACH_TERASTATION_PRO2 is not set -# CONFIG_MACH_TS209 is not set -# CONFIG_MACH_TS409 is not set -# CONFIG_MACH_TS78XX is not set -CONFIG_MACH_WN802T=y -CONFIG_MACH_WNR854T=y -CONFIG_MACH_WRT350N_V2=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MV643XX_ETH=y -CONFIG_MVEBU_MBUS=y -CONFIG_MVMDIO=y -# CONFIG_MVNETA is not set -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_KUSER_HELPERS=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6XXX=y -CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y -CONFIG_NET_DSA_TAG_DSA=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -CONFIG_PLAT_ORION=y -CONFIG_PLAT_ORION_LEGACY=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_RCU_STALL_COMMON is not set -CONFIG_SCHED_HRTICK=y -# CONFIG_SCSI_DMA is not set -CONFIG_SPLIT_PTLOCK_CPUS=999999 -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_UID16=y -CONFIG_UIDGID_CONVERTED=y -CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h" -CONFIG_USB_ARCH_HAS_XHCI=y -CONFIG_USB_SUPPORT=y -CONFIG_VECTORS_BASE=0xffff0000 -# CONFIG_VFP is not set -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/orion/patches-3.18/100-wrt350nv2_openwrt_partition_map.patch b/target/linux/orion/patches-3.18/100-wrt350nv2_openwrt_partition_map.patch deleted file mode 100644 index 8b614067df..0000000000 --- a/target/linux/orion/patches-3.18/100-wrt350nv2_openwrt_partition_map.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c -+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c -@@ -134,11 +134,11 @@ static struct mtd_partition wrt350n_v2_n - { - .name = "kernel", - .offset = 0x00000000, -- .size = 0x00760000, -+ .size = 0x00140000, // change to kernel mtd size here (1/3) - }, { - .name = "rootfs", -- .offset = 0x001a0000, -- .size = 0x005c0000, -+ .offset = 0x00140000, // change to kernel mtd size here (2/3) -+ .size = 0x00610000, // adopt to kernel mtd size here (3/3) = 0x00750000 - <kernel mtd size> - }, { - .name = "lang", - .offset = 0x00760000, -@@ -151,6 +151,14 @@ static struct mtd_partition wrt350n_v2_n - .name = "u-boot", - .offset = 0x007c0000, - .size = 0x00040000, -+ }, { -+ .name = "eRcOmM_do_not_touch", -+ .offset = 0x00750000, -+ .size = 0x00010000, // erasesize -+ }, { -+ .name = "image", // for sysupgrade -+ .offset = 0x00000000, -+ .size = 0x00750000, - }, - }; diff --git a/target/linux/orion/patches-3.18/101-wnr854t_partition_map.patch b/target/linux/orion/patches-3.18/101-wnr854t_partition_map.patch deleted file mode 100644 index 0839ca4a18..0000000000 --- a/target/linux/orion/patches-3.18/101-wnr854t_partition_map.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- a/arch/arm/mach-orion5x/wnr854t-setup.c -+++ b/arch/arm/mach-orion5x/wnr854t-setup.c -@@ -57,15 +57,19 @@ static struct mtd_partition wnr854t_nor_ - { - .name = "kernel", - .offset = 0x00000000, -- .size = 0x00100000, -+ .size = 0x00140000, - }, { - .name = "rootfs", -- .offset = 0x00100000, -- .size = 0x00660000, -+ .offset = 0x00140000, -+ .size = 0x00620000, - }, { - .name = "uboot", - .offset = 0x00760000, - .size = 0x00040000, -+ }, { -+ .name = "image", // for sysupgrade -+ .offset = 0x00000000, -+ .size = 0x00760000, - }, - }; diff --git a/target/linux/orion/patches-3.18/200-dt2_board_support.patch b/target/linux/orion/patches-3.18/200-dt2_board_support.patch deleted file mode 100644 index 3d2efffe68..0000000000 --- a/target/linux/orion/patches-3.18/200-dt2_board_support.patch +++ /dev/null @@ -1,570 +0,0 @@ -Index: linux-3.18.43/arch/arm/mach-orion5x/Kconfig -=================================================================== ---- linux-3.18.43.orig/arch/arm/mach-orion5x/Kconfig -+++ linux-3.18.43/arch/arm/mach-orion5x/Kconfig -@@ -36,6 +36,13 @@ config MACH_RD88F5182_DT - Say 'Y' here if you want your kernel to support the Marvell - Orion-NAS (88F5182) RD2, Flattened Device Tree. - -+config MACH_DT2 -+ bool "Freecom DataTank Gateway" -+ select I2C_BOARDINFO -+ help -+ Say 'Y' here if you want your kernel to support the -+ Freecom DataTank Gateway -+ - config MACH_KUROBOX_PRO - bool "KuroBox Pro" - select I2C_BOARDINFO -Index: linux-3.18.43/arch/arm/mach-orion5x/Makefile -=================================================================== ---- linux-3.18.43.orig/arch/arm/mach-orion5x/Makefile -+++ linux-3.18.43/arch/arm/mach-orion5x/Makefile -@@ -14,6 +14,7 @@ obj-$(CONFIG_MACH_TS78XX) += ts78xx-setu - obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o - obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o - obj-$(CONFIG_MACH_WNR854T) += wnr854t-setup.o -+obj-$(CONFIG_MACH_DT2) += dt2-setup.o - obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o - obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o - obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o -Index: linux-3.18.43/arch/arm/mach-orion5x/dt2-common.h -=================================================================== ---- /dev/null -+++ linux-3.18.43/arch/arm/mach-orion5x/dt2-common.h -@@ -0,0 +1,82 @@ -+#ifndef __INC_DT2_COMMON_H -+#define __INC_DT2_COMMON_H -+ -+#define ATAG_MV_UBOOT 0x41000403 -+ -+struct tag_mv_uboot { -+ u32 uboot_version; -+ u32 tclk; -+ u32 sysclk; -+ u32 isUsbHost; -+ u32 overEthAddr; -+ u8 dt2_eeprom[256]; -+}; -+ -+#define DT2_EEPROM_ADDR 0x50 -+#define DT2_EEPROM_OFFSET 0 -+#define DT2_EEPROM_LENGTH 256 -+ -+#define DT2_SERIAL_NUMBER_DEFAULT "run on default\0" -+#define DT2_REVISION_DEFAULT_INIT 0xFF -+#define DT2_CONFIG_FLAGS_DEFAULT 0x00 -+ -+#define _PACKED_ __attribute__((packed)) -+ -+struct DT2_EEPROM_SD_CONFIG { -+ unsigned int ram_1; -+ unsigned int ram_2; -+ unsigned int ram_3; -+ unsigned int ram_4; -+ unsigned char ram_5; -+ unsigned char ram_6; -+ unsigned short ram_7; -+ unsigned int magic_id; -+ } _PACKED_; // 24 Bytes in total -+ -+struct DT2_EEPROM_FC_CONFIG { -+ unsigned char rtc_sts_mask; -+ unsigned char rtc_sts_init; -+ unsigned char rtc_int_mask; -+ unsigned char rtc_int_init; -+ unsigned char rtc_atrim_init; -+ unsigned char rtc_dtrim_init; -+ unsigned char dummy1; -+ unsigned char dummy2; -+ unsigned char dt2_config_flags; /* 0x80 to load rtc_values to RTC */ -+ unsigned char dt2_revision; /* upper nibble is HW, lower nibble is FW */ -+ unsigned char dt2_serial_number[16]; /* Serial number of DT-2 */ -+ } _PACKED_; // 26 Bytes in total -+ -+#define CFG_LOAD_RTC_VALUES 0x80 -+ -+struct DT2_EEPROM_GW_CONFIG { -+ unsigned int dummy1; -+ unsigned int dummy2; -+ unsigned int dummy3; -+ unsigned char dummy4; -+ unsigned char tos_video_val1; -+ unsigned char tos_video_val2; -+ unsigned char tos_voip_val; -+ unsigned char qos_igmp_cfg; -+ unsigned char num_of_ifs; -+ unsigned short vlan_ports_if[3]; -+ unsigned char mac_addr[3][6]; -+ } _PACKED_; // 42 Bytes in total -+ -+#define _SIZE_OF_ALL_STRUCTS_ (sizeof(struct DT2_EEPROM_SD_CONFIG) + sizeof(struct DT2_EEPROM_FC_CONFIG) + sizeof(struct DT2_EEPROM_GW_CONFIG)) -+ -+// MV = EEPROM - SD - FC - GW - CRC -+struct DT2_EEPROM_MV_CONFIG { -+ unsigned int reg_addr[(DT2_EEPROM_LENGTH - _SIZE_OF_ALL_STRUCTS_ - sizeof(unsigned int)) / (sizeof(unsigned int) * 2)]; -+ unsigned int reg_data[(DT2_EEPROM_LENGTH - _SIZE_OF_ALL_STRUCTS_ - sizeof(unsigned int)) / (sizeof(unsigned int) * 2)]; -+ } _PACKED_; -+ -+struct DT2_EEPROM_STRUCT { -+ struct DT2_EEPROM_MV_CONFIG mv; -+ struct DT2_EEPROM_SD_CONFIG sd; -+ struct DT2_EEPROM_FC_CONFIG fc; -+ struct DT2_EEPROM_GW_CONFIG gw; -+ unsigned int crc; -+ } _PACKED_; -+ -+#endif -Index: linux-3.18.43/arch/arm/mach-orion5x/dt2-setup.c -=================================================================== ---- /dev/null -+++ linux-3.18.43/arch/arm/mach-orion5x/dt2-setup.c -@@ -0,0 +1,448 @@ -+/* -+ * arch/arm/mach-orion5x/dt2-setup.c -+ * -+ * Freecom DataTank Gateway Setup -+ * -+ * Copyright (C) 2009 Zintis Petersons <Zintis.Petersons@abcsolutions.lv> -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+#include <linux/pci.h> -+#include <linux/irq.h> -+#include <linux/mtd/physmap.h> -+#include <linux/mv643xx_eth.h> -+#include <linux/ethtool.h> -+#include <linux/if_ether.h> -+#include <net/dsa.h> -+#include <linux/ata_platform.h> -+#include <linux/i2c.h> -+#include <linux/reboot.h> -+#include <linux/interrupt.h> -+#include <asm/mach-types.h> -+#include <asm/gpio.h> -+#include <asm/mach/arch.h> -+#include <asm/mach/pci.h> -+#include <mach/orion5x.h> -+#include "common.h" -+#include "mpp.h" -+ -+/***************************************************************************** -+ * DT2 local -+ ****************************************************************************/ -+#include <asm/setup.h> -+#include "dt2-common.h" -+ -+u32 mvUbootVer = 0; -+u32 mvTclk = 166666667; -+u32 mvSysclk = 200000000; -+u32 mvIsUsbHost = 1; -+u32 overEthAddr = 0; -+u32 gBoardId = -1; -+struct DT2_EEPROM_STRUCT dt2_eeprom; -+ -+/***************************************************************************** -+ * DT2 Info -+ ****************************************************************************/ -+/* -+ * PCI -+ */ -+ -+#define DT2_PCI_SLOT0_OFFS 7 -+#define DT2_PCI_SLOT0_IRQ_A_PIN 3 -+#define DT2_PCI_SLOT0_IRQ_B_PIN 2 -+ -+#define DT2_PIN_GPIO_SYNC 25 -+#define DT2_PIN_GPIO_POWER 24 -+#define DT2_PIN_GPIO_UNPLUG1 23 -+#define DT2_PIN_GPIO_UNPLUG2 22 -+#define DT2_PIN_GPIO_RESET 4 -+ -+#define DT2_NOR_BOOT_BASE 0xf4000000 -+#define DT2_NOR_BOOT_SIZE SZ_512K -+ -+#define DT2_LEDS_BASE 0xfa000000 -+#define DT2_LEDS_SIZE SZ_1K -+ -+/***************************************************************************** -+ * 512K NOR Flash on Device bus Boot CS -+ ****************************************************************************/ -+ -+static struct mtd_partition dt2_partitions[] = { -+ { -+ .name = "u-boot", -+ .size = 0x00080000, -+ .offset = 0, -+ }, -+}; -+ -+static struct physmap_flash_data dt2_nor_flash_data = { -+ .width = 1, /* 8 bit bus width */ -+ .parts = dt2_partitions, -+ .nr_parts = ARRAY_SIZE(dt2_partitions) -+}; -+ -+static struct resource dt2_nor_flash_resource = { -+ .flags = IORESOURCE_MEM, -+ .start = DT2_NOR_BOOT_BASE, -+ .end = DT2_NOR_BOOT_BASE + DT2_NOR_BOOT_SIZE - 1, -+}; -+ -+static struct platform_device dt2_nor_flash = { -+ .name = "physmap-flash", -+ .id = 0, -+ .dev = { -+ .platform_data = &dt2_nor_flash_data, -+ }, -+ .resource = &dt2_nor_flash_resource, -+ .num_resources = 1, -+}; -+ -+/***************************************************************************** -+ * PCI -+ ****************************************************************************/ -+ -+void __init dt2_pci_preinit(void) -+{ -+ int pin, irq; -+ -+ /* -+ * Configure PCI GPIO IRQ pins -+ */ -+ pin = DT2_PCI_SLOT0_IRQ_A_PIN; -+ if (gpio_request(pin, "PCI IntA") == 0) { -+ if (gpio_direction_input(pin) == 0) { -+ irq = gpio_to_irq(pin); -+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); -+ printk (KERN_INFO "PCI IntA IRQ: %d\n", irq); -+ } else { -+ printk(KERN_ERR "dt2_pci_preinit failed to " -+ "irq_set_irq_type pin %d\n", pin); -+ gpio_free(pin); -+ } -+ } else { -+ printk(KERN_ERR "dt2_pci_preinit failed to request gpio %d\n", pin); -+ } -+ -+ pin = DT2_PCI_SLOT0_IRQ_B_PIN; -+ if (gpio_request(pin, "PCI IntB") == 0) { -+ if (gpio_direction_input(pin) == 0) { -+ irq = gpio_to_irq(pin); -+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); -+ printk (KERN_INFO "PCI IntB IRQ: %d\n", irq); -+ } else { -+ printk(KERN_ERR "dt2_pci_preinit failed to " -+ "irq_set_irq_type pin %d\n", pin); -+ gpio_free(pin); -+ } -+ } else { -+ printk(KERN_ERR "dt2_pci_preinit failed to gpio_request %d\n", pin); -+ } -+} -+ -+static int __init dt2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ int irq; -+ -+ /* -+ * Check for devices with hard-wired IRQs. -+ */ -+ irq = orion5x_pci_map_irq(dev, slot, pin); -+ if (irq != -1){ -+ printk(KERN_INFO "orion5x_pci_map_irq: %d\n", irq); -+ return irq; -+ } -+ -+ /* -+ * PCI IRQs are connected via GPIOs -+ */ -+ switch (slot - DT2_PCI_SLOT0_OFFS) { -+ case 0: -+ if (pin == 1){ -+ irq = gpio_to_irq(DT2_PCI_SLOT0_IRQ_A_PIN); -+ printk(KERN_INFO "dt2_pci_map_irq DT2_PCI_SLOT0_IRQ_A_PIN: %d\n", irq); -+ } -+ else { -+ irq = gpio_to_irq(DT2_PCI_SLOT0_IRQ_B_PIN); -+ printk(KERN_INFO "dt2_pci_map_irq DT2_PCI_SLOT0_IRQ_B_PIN: %d\n", irq); -+ } -+ default: -+ irq = -1; -+ printk(KERN_INFO "dt2_pci_map_irq IRQ: %d\n", irq); -+ } -+ -+ return irq; -+} -+ -+static struct hw_pci dt2_pci __initdata = { -+ .nr_controllers = 2, -+ .preinit = dt2_pci_preinit, -+ .setup = orion5x_pci_sys_setup, -+ .scan = orion5x_pci_sys_scan_bus, -+ .map_irq = dt2_pci_map_irq, -+}; -+ -+static int __init dt2_pci_init(void) -+{ -+ if (machine_is_dt2()) -+ pci_common_init(&dt2_pci); -+ -+ return 0; -+} -+ -+subsys_initcall(dt2_pci_init); -+ -+/***************************************************************************** -+ * Ethernet -+ ****************************************************************************/ -+ -+static struct mv643xx_eth_platform_data dt2_eth_data = { -+ .phy_addr = MV643XX_ETH_PHY_NONE, -+ .speed = SPEED_1000, -+ .duplex = DUPLEX_FULL, -+}; -+ -+static struct dsa_chip_data dt2_switch_chip_data = { -+ .port_names[0] = "wan", -+ .port_names[1] = "lan1", -+ .port_names[2] = "lan2", -+ .port_names[3] = "cpu", -+ .port_names[4] = "lan3", -+ .port_names[5] = "lan4", -+}; -+ -+static struct dsa_platform_data dt2_switch_plat_data = { -+ .nr_chips = 1, -+ .chip = &dt2_switch_chip_data, -+}; -+ -+/***************************************************************************** -+ * RTC ISL1208 on I2C bus -+ ****************************************************************************/ -+static struct i2c_board_info __initdata dt2_i2c_rtc = { -+ I2C_BOARD_INFO("isl1208", 0x6F), -+}; -+ -+/***************************************************************************** -+ * Sata -+ ****************************************************************************/ -+static struct mv_sata_platform_data dt2_sata_data = { -+ .n_ports = 2, -+}; -+ -+/***************************************************************************** -+ * General Setup -+ ****************************************************************************/ -+static unsigned int dt2_mpp_modes[] __initdata = { -+ MPP0_GPIO, // RTC interrupt -+ MPP1_GPIO, // 88e6131 interrupt -+ MPP2_GPIO, // PCI_intB -+ MPP3_GPIO, // PCI_intA -+ MPP4_GPIO, // reset button switch -+ MPP5_GPIO, -+ MPP6_GPIO, -+ MPP7_GPIO, -+ MPP8_GPIO, -+ MPP9_GIGE, /* GE_RXERR */ -+ MPP10_GPIO, // usb -+ MPP11_GPIO, // usb -+ MPP12_GIGE, // GE_TXD[4] -+ MPP13_GIGE, // GE_TXD[5] -+ MPP14_GIGE, // GE_TXD[6] -+ MPP15_GIGE, // GE_TXD[7] -+ MPP16_GIGE, // GE_RXD[4] -+ MPP17_GIGE, // GE_RXD[5] -+ MPP18_GIGE, // GE_RXD[6] -+ MPP19_GIGE, // GE_RXD[7] -+ 0, -+}; -+ -+/***************************************************************************** -+ * LEDS -+ ****************************************************************************/ -+static struct platform_device dt2_leds = { -+ .name = "dt2-led", -+ .id = -1, -+}; -+ -+/**************************************************************************** -+ * GPIO key -+ ****************************************************************************/ -+static irqreturn_t dt2_reset_handler(int irq, void *dev_id) -+{ -+ /* This is the paper-clip reset which does an emergency reboot. */ -+ printk(KERN_INFO "Restarting system.\n"); -+ machine_restart(NULL); -+ -+ /* This should never be reached. */ -+ return IRQ_HANDLED; -+} -+ -+static irqreturn_t dt2_power_handler(int irq, void *dev_id) -+{ -+ printk(KERN_INFO "Shutting down system.\n"); -+ machine_power_off(); -+ return IRQ_HANDLED; -+} -+ -+static void __init dt2_init(void) -+{ -+ /* -+ * Setup basic Orion functions. Need to be called early. -+ */ -+ orion5x_init(); -+ -+ orion5x_mpp_conf(dt2_mpp_modes); -+ -+ /* -+ * Configure peripherals. -+ */ -+ -+ orion5x_uart0_init(); -+ orion5x_ehci0_init(); -+ orion5x_ehci1_init(); -+ orion5x_i2c_init(); -+ orion5x_sata_init(&dt2_sata_data); -+ orion5x_xor_init(); -+ -+ printk(KERN_INFO "U-Boot parameters:\n"); -+ printk(KERN_INFO "Sys Clk = %d, Tclk = %d, BoardID = 0x%02x\n", mvSysclk, mvTclk, gBoardId); -+ -+ printk(KERN_INFO "Serial: %s\n", dt2_eeprom.fc.dt2_serial_number); -+ printk(KERN_INFO "Revision: %016x\n", dt2_eeprom.fc.dt2_revision); -+ printk(KERN_INFO "DT2: Using MAC address %pM for port 0\n", -+ dt2_eeprom.gw.mac_addr[0]); -+ printk(KERN_INFO "DT2: Using MAC address %pM for port 1\n", -+ dt2_eeprom.gw.mac_addr[1]); -+ -+ orion5x_eth_init(&dt2_eth_data); -+ memcpy(dt2_eth_data.mac_addr, dt2_eeprom.gw.mac_addr[0], 6); -+ orion5x_eth_switch_init(&dt2_switch_plat_data, NO_IRQ); -+ -+ i2c_register_board_info(0, &dt2_i2c_rtc, 1); -+ -+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, -+ ORION_MBUS_DEVBUS_BOOT_ATTR, -+ DT2_NOR_BOOT_BASE, DT2_NOR_BOOT_SIZE); -+ -+ platform_device_register(&dt2_nor_flash); -+ -+ mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0), -+ ORION_MBUS_DEVBUS_ATTR(0), -+ DT2_LEDS_BASE, DT2_LEDS_SIZE); -+ platform_device_register(&dt2_leds); -+ -+ if (request_irq(gpio_to_irq(DT2_PIN_GPIO_RESET), &dt2_reset_handler, -+ IRQF_TRIGGER_LOW, -+ "DT2: Reset button", NULL) < 0) { -+ -+ printk("DT2: Reset Button IRQ %d not available\n", -+ gpio_to_irq(DT2_PIN_GPIO_RESET)); -+ } -+ -+ if (request_irq(gpio_to_irq(DT2_PIN_GPIO_POWER), &dt2_power_handler, -+ IRQF_TRIGGER_LOW, -+ "DT2: Power button", NULL) < 0) { -+ -+ printk(KERN_DEBUG "DT2: Power Button IRQ %d not available\n", -+ gpio_to_irq(DT2_PIN_GPIO_POWER)); -+ } -+} -+ -+static int __init parse_tag_dt2_uboot(const struct tag *t) -+{ -+ struct tag_mv_uboot *mv_uboot; -+ -+ // Get pointer to our block -+ mv_uboot = (struct tag_mv_uboot*)&t->u; -+ mvTclk = mv_uboot->tclk; -+ mvSysclk = mv_uboot->sysclk; -+ mvUbootVer = mv_uboot->uboot_version; -+ mvIsUsbHost = mv_uboot->isUsbHost; -+ -+ // Some clock fixups -+ if(mvTclk == 166000000) mvTclk = 166666667; -+ else if(mvTclk == 133000000) mvTclk = 133333333; -+ else if(mvSysclk == 166000000) mvSysclk = 166666667; -+ -+ gBoardId = (mvUbootVer & 0xff); -+ -+ //DT2 specific data -+ memcpy(&dt2_eeprom, mv_uboot->dt2_eeprom, sizeof(struct DT2_EEPROM_STRUCT)); -+ -+ return 0; -+} -+__tagtable(ATAG_MV_UBOOT, parse_tag_dt2_uboot); -+ -+/* -+ * This is OpenWrt specific fixup. It includes code from original "tag_fixup_mem32" to -+ * fixup bogus memory tags and also fixes kernel cmdline by adding " init=/etc/preinit" -+ * at the end. It is important to flash OpenWrt image from original Freecom firmware. -+ * -+ * Vanilla kernel should use "tag_fixup_mem32" function. -+ */ -+static void __init openwrt_fixup(struct tag *t, char **from) -+{ -+ char *p = NULL; -+ static char openwrt_init_tag[] __initdata = " init=/etc/preinit"; -+ -+ for (; t->hdr.size; t = tag_next(t)){ -+ /* Locate the Freecom cmdline */ -+ if (t->hdr.tag == ATAG_CMDLINE) { -+ p = t->u.cmdline.cmdline; -+ printk("%s(%d): Found cmdline '%s' at 0x%0lx\n", -+ __FUNCTION__, __LINE__, p, (unsigned long)p); -+ } -+ /* -+ * Many orion-based systems have buggy bootloader implementations. -+ * This is a common fixup for bogus memory tags. -+ */ -+ if (t->hdr.tag == ATAG_MEM && -+ (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK || -+ t->u.mem.start & ~PAGE_MASK)) { -+ printk(KERN_WARNING -+ "Clearing invalid memory bank %dKB@0x%08x\n", -+ t->u.mem.size / 1024, t->u.mem.start); -+ t->hdr.tag = 0; -+ } -+ } -+ -+ printk("%s(%d): End of table at 0x%0lx\n", __FUNCTION__, __LINE__, (unsigned long)t); -+ -+ /* Overwrite the end of the table with a new cmdline tag. */ -+ t->hdr.tag = ATAG_CMDLINE; -+ t->hdr.size = -+ (sizeof (struct tag_header) + -+ strlen(p) + strlen(openwrt_init_tag) + 1 + 4) >> 2; -+ -+ strlcpy(t->u.cmdline.cmdline, p, COMMAND_LINE_SIZE); -+ strlcpy(t->u.cmdline.cmdline + strlen(p), openwrt_init_tag, -+ COMMAND_LINE_SIZE - strlen(p)); -+ -+ printk("%s(%d): New cmdline '%s' at 0x%0lx\n", -+ __FUNCTION__, __LINE__, -+ t->u.cmdline.cmdline, (unsigned long)t->u.cmdline.cmdline); -+ -+ t = tag_next(t); -+ -+ printk("%s(%d): New end of table at 0x%0lx\n", __FUNCTION__, __LINE__, (unsigned long)t); -+ -+ t->hdr.tag = ATAG_NONE; -+ t->hdr.size = 0; -+} -+ -+/* Warning: Freecom uses their own custom bootloader with mach-type (=1500) */ -+MACHINE_START(DT2, "Freecom DataTank Gateway") -+ /* Maintainer: Zintis Petersons <Zintis.Petersons@abcsolutions.lv> */ -+ .atag_offset = 0x100, -+ .init_machine = dt2_init, -+ .map_io = orion5x_map_io, -+ .init_irq = orion5x_init_irq, -+ .init_time = orion5x_timer_init, -+ .fixup = openwrt_fixup, //tag_fixup_mem32, -+MACHINE_END diff --git a/target/linux/orion/patches-3.18/210-wn802t_support.patch b/target/linux/orion/patches-3.18/210-wn802t_support.patch deleted file mode 100644 index e17d399fdf..0000000000 --- a/target/linux/orion/patches-3.18/210-wn802t_support.patch +++ /dev/null @@ -1,78 +0,0 @@ ---- a/arch/arm/mach-orion5x/Kconfig -+++ b/arch/arm/mach-orion5x/Kconfig -@@ -144,10 +144,13 @@ config MACH_MSS2_DT - Maxtor Shared Storage II platform. - - config MACH_WNR854T -- bool "Netgear WNR854T" -+ bool "Netgear WNR854T / WN802T" - help - Say 'Y' here if you want your kernel to support the -- Netgear WNR854T platform. -+ Netgear WNR854T or WN802T platform. -+ -+config MACH_WN802T -+ def_bool MACH_WNR854T - - config MACH_RD88F5181L_GE - bool "Marvell Orion-VoIP GE Reference Design" ---- a/arch/arm/mach-orion5x/wnr854t-setup.c -+++ b/arch/arm/mach-orion5x/wnr854t-setup.c -@@ -115,6 +115,15 @@ static struct dsa_platform_data wnr854t_ - .chip = &wnr854t_switch_chip_data, - }; - -+static struct dsa_chip_data wn802t_switch_chip_data = { -+ .port_names[2] = "wan", -+ .port_names[3] = "cpu", -+}; -+ -+static struct dsa_platform_data wn802t_switch_plat_data = { -+ .nr_chips = 1, -+ .chip = &wn802t_switch_chip_data, -+}; - static void __init wnr854t_init(void) - { - /* -@@ -128,7 +137,12 @@ static void __init wnr854t_init(void) - * Configure peripherals. - */ - orion5x_eth_init(&wnr854t_eth_data); -- orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ); -+ -+ if (machine_is_wn802t()) -+ orion5x_eth_switch_init(&wn802t_switch_plat_data, NO_IRQ); -+ else -+ orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ); -+ - orion5x_uart0_init(); - - mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET, -@@ -168,7 +182,7 @@ static struct hw_pci wnr854t_pci __initd - - static int __init wnr854t_pci_init(void) - { -- if (machine_is_wnr854t()) -+ if (machine_is_wnr854t() || machine_is_wn802t()) - pci_common_init(&wnr854t_pci); - - return 0; -@@ -179,6 +193,18 @@ MACHINE_START(WNR854T, "Netgear WNR854T" - /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ - .atag_offset = 0x100, - .init_machine = wnr854t_init, -+ .map_io = orion5x_map_io, -+ .init_early = orion5x_init_early, -+ .init_irq = orion5x_init_irq, -+ .init_time = orion5x_timer_init, -+ .fixup = tag_fixup_mem32, -+ .restart = orion5x_restart, -+MACHINE_END -+ -+MACHINE_START(WN802T, "Netgear WN802T") -+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ -+ .atag_offset = 0x100, -+ .init_machine = wnr854t_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, |