diff options
Diffstat (limited to 'target/linux')
-rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 9 | ||||
-rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 7 | ||||
-rw-r--r-- | target/linux/ramips/base-files/etc/diag.sh | 2 | ||||
-rwxr-xr-x | target/linux/ramips/base-files/lib/ramips.sh | 3 | ||||
-rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 2 | ||||
-rw-r--r-- | target/linux/ramips/dts/GB-PC2.dts | 31 | ||||
-rw-r--r-- | target/linux/ramips/image/mt7621.mk | 4 |
7 files changed, 22 insertions, 36 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 573dd31c64..16d38dd5fe 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -187,16 +187,11 @@ fonera20n) set_usb_led "$boardname:orange:usb" set_wifi_led "$boardname:orange:wifi" ;; -gb-pc1) +gb-pc1|\ +gnubee,gb-pc2) ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01" ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10" ;; -gb-pc2) - ucidef_set_led_switch "lan" "lan" "$board:green:lan" "switch0" "0x01" - ucidef_set_led_switch "wan" "wan" "$board:green:wan" "switch0" "0x10" - ucidef_set_led_netdev "eth1-g" "eth1-g" "$board:green:eth1-g" "eth1" - ucidef_set_led_netdev "eth1-y" "eth1-y" "$board:green:eth1-y" "eth1" - ;; gl-mt300a|\ gl-mt300n|\ gl-mt750) diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 4208321e69..946810b3e2 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -202,14 +202,11 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0" ;; - gb-pc1) + gb-pc1|\ + gnubee,gb-pc2) ucidef_add_switch "switch0" \ "0:lan" "4:lan" "6@eth0" ;; - gb-pc2) - ucidef_add_switch "switch0" \ - "4:lan" "0:wan" "6@eth0" - ;; gl-mt300n-v2) ucidef_add_switch "switch0" \ "1:lan" "0:wan" "6@eth0" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 04a398c826..c5f62ab66d 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -91,7 +91,7 @@ get_status_led() { dir-620-d1|\ dwr-512-b|\ gb-pc1|\ - gb-pc2|\ + gnubee,gb-pc2|\ hpm|\ hw550-3g|\ mac1200rv2|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 74ed5913b8..75474fbc6d 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -205,9 +205,6 @@ ramips_board_detect() { *"GB-PC1") name="gb-pc1" ;; - *"GB-PC2") - name="gb-pc2" - ;; *"GL-MT300A") name="gl-mt300a" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index fd0198263e..23d31e9463 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -61,7 +61,7 @@ platform_check_image() { fonera20n|\ freestation5|\ gb-pc1|\ - gb-pc2|\ + gnubee,gb-pc2|\ gl-mt300a|\ gl-mt300n|\ gl-mt750|\ diff --git a/target/linux/ramips/dts/GB-PC2.dts b/target/linux/ramips/dts/GB-PC2.dts index f31ac2b843..ccaf54f3c8 100644 --- a/target/linux/ramips/dts/GB-PC2.dts +++ b/target/linux/ramips/dts/GB-PC2.dts @@ -18,12 +18,6 @@ bootargs = "console=ttyS0,57600"; }; - palmbus: palmbus@1E000000 { - i2c@900 { - status = "okay"; - }; - }; - gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -50,23 +44,23 @@ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; - lan { - label = "gb-pc2:green:lan"; + lan1 { + label = "gb-pc2:green:lan1"; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; }; - wan { - label = "gb-pc2:green:wan"; + lan2 { + label = "gb-pc2:green:lan2"; gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; - eth1-y { - label = "gb-pc2:yellow:eth1-y"; + lan3-yellow { + label = "gb-pc2:yellow:lan3"; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; - eth1-g { - label = "gb-pc2:green:eth1-g"; + lan3-green { + label = "gb-pc2:green:lan3"; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; @@ -75,6 +69,9 @@ &sdhci { status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; }; &spi0 { @@ -114,8 +111,8 @@ }; &cpuclock { - compatible = "fixed-clock"; - clock-frequency = <900000000>; + compatible = "fixed-clock"; + clock-frequency = <900000000>; }; &pcie { @@ -129,7 +126,7 @@ &pinctrl { state_default: pinctrl0 { gpio { - ralink,group = "uart3"; + ralink,group = "jtag", "rgmii3", "uart3", "wdt"; ralink,function = "gpio"; }; }; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index f0b5a8444f..d3dfb237b6 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -83,13 +83,13 @@ define Device/gb-pc1 endef TARGET_DEVICES += gb-pc1 -define Device/gb-pc2 +define Device/gnubee_gb-pc2 DTS := GB-PC2 DEVICE_TITLE := GnuBee Personal Cloud Two DEVICE_PACKAGES := kmod-ata-core kmod-ata-ahci kmod-usb3 kmod-sdhci-mt7620 IMAGE_SIZE := $(ralink_default_fw_size_32M) endef -TARGET_DEVICES += gb-pc2 +TARGET_DEVICES += gnubee_gb-pc2 define Device/hc5962 DTS := HC5962 |