diff options
Diffstat (limited to 'target/linux')
13 files changed, 0 insertions, 6524 deletions
diff --git a/target/linux/atheros/config-3.8 b/target/linux/atheros/config-3.8 deleted file mode 100644 index efc2716071..0000000000 --- a/target/linux/atheros/config-3.8 +++ /dev/null @@ -1,123 +0,0 @@ -CONFIG_ADM6996_PHY=y -CONFIG_AR8216_PHY=y -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ATHEROS_AR2315=y -CONFIG_ATHEROS_AR2315_PCI=y -CONFIG_ATHEROS_AR231X=y -CONFIG_ATHEROS_AR5312=y -CONFIG_ATHEROS_WDT=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -CONFIG_CPU_MIPSR1=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_R4K_FPU=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CSRC_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ETHERNET_PACKET_MANGLE=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HAMRADIO is not set -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_WORK=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_HAVE_MOD_ARCH_SPECIFIC=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_IMAGE_CMDLINE_HACK=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IP17XX_PHY=y -CONFIG_IRQ_CPU=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_LEDS_GPIO=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MIPS=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MACHINE is not set -CONFIG_MIPS_MT_DISABLED=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_AR2315=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_MYLOADER_PARTS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3 -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MVSWITCH_PHY=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_VENDOR_AR231X=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PCI=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -# CONFIG_PREEMPT_RCU is not set -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -# CONFIG_SWAP is not set -CONFIG_SWCONFIG=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_UIDGID_CONVERTED=y -CONFIG_USB_ARCH_HAS_XHCI=y -CONFIG_USB_SUPPORT=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/atheros/patches-3.8/001-get_c0_compare_int_fix.patch b/target/linux/atheros/patches-3.8/001-get_c0_compare_int_fix.patch deleted file mode 100644 index ff6cc998ff..0000000000 --- a/target/linux/atheros/patches-3.8/001-get_c0_compare_int_fix.patch +++ /dev/null @@ -1,39 +0,0 @@ -Fix the usage of get_c0_compare_int: override cp0_compare_irq if the returned -value is in the MIPS CPU IRQ range to ensure that c0_compare_int_usable() -still works. - -Signed-off-by: Felix Fietkau <nbd@openwrt.org> - ---- a/arch/mips/kernel/cevt-r4k.c -+++ b/arch/mips/kernel/cevt-r4k.c -@@ -173,20 +173,23 @@ int __cpuinit r4k_clockevent_init(void) - struct clock_event_device *cd; - unsigned int irq; - -- if (!cpu_has_counter || !mips_hpt_frequency) -- return -ENXIO; -- -- if (!c0_compare_int_usable()) -- return -ENXIO; -- - /* - * With vectored interrupts things are getting platform specific. - * get_c0_compare_int is a hook to allow a platform to return the - * interrupt number of it's liking. - */ - irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; -- if (get_c0_compare_int) -+ if (get_c0_compare_int) { - irq = get_c0_compare_int(); -+ if ((irq >= MIPS_CPU_IRQ_BASE) && (irq < MIPS_CPU_IRQ_BASE + 8)) -+ cp0_compare_irq = irq - MIPS_CPU_IRQ_BASE; -+ } -+ -+ if (!cpu_has_counter || !mips_hpt_frequency) -+ return -ENXIO; -+ -+ if (!c0_compare_int_usable()) -+ return -ENXIO; - - cd = &per_cpu(mips_clockevent_device, cpu); - diff --git a/target/linux/atheros/patches-3.8/100-board.patch b/target/linux/atheros/patches-3.8/100-board.patch deleted file mode 100644 index 32667e9825..0000000000 --- a/target/linux/atheros/patches-3.8/100-board.patch +++ /dev/null @@ -1,3158 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -135,6 +135,19 @@ config BCM63XX - help - Support for BCM63XX based boards - -+config ATHEROS_AR231X -+ bool "Atheros 231x/531x SoC support" -+ select CEVT_R4K -+ select CSRC_R4K -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select ARCH_REQUIRE_GPIOLIB -+ help -+ Support for AR231x and AR531x based boards -+ - config MIPS_COBALT - bool "Cobalt Server" - select CEVT_R4K -@@ -836,6 +849,7 @@ config NLM_XLP_BOARD - - endchoice - -+source "arch/mips/ar231x/Kconfig" - source "arch/mips/alchemy/Kconfig" - source "arch/mips/ath79/Kconfig" - source "arch/mips/bcm47xx/Kconfig" ---- a/arch/mips/Kbuild.platforms -+++ b/arch/mips/Kbuild.platforms -@@ -6,6 +6,7 @@ platforms += ath79 - platforms += bcm47xx - platforms += bcm63xx - platforms += cavium-octeon -+platforms += ar231x - platforms += cobalt - platforms += dec - platforms += emma ---- /dev/null -+++ b/arch/mips/ar231x/Platform -@@ -0,0 +1,6 @@ -+# -+# Atheros AR5312/AR2312 WiSoC -+# -+platform-$(CONFIG_ATHEROS_AR231X) += ar231x/ -+cflags-$(CONFIG_ATHEROS_AR231X) += -I$(srctree)/arch/mips/include/asm/mach-ar231x -+load-$(CONFIG_ATHEROS_AR231X) += 0xffffffff80041000 ---- /dev/null -+++ b/arch/mips/ar231x/Kconfig -@@ -0,0 +1,16 @@ -+config ATHEROS_AR5312 -+ bool "Atheros 5312/2312+ support" -+ depends on ATHEROS_AR231X -+ default y -+ -+config ATHEROS_AR2315 -+ bool "Atheros 2315+ support" -+ depends on ATHEROS_AR231X -+ select DMA_NONCOHERENT -+ select CEVT_R4K -+ select CSRC_R4K -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ default y ---- /dev/null -+++ b/arch/mips/ar231x/Makefile -@@ -0,0 +1,13 @@ -+# -+# This file is subject to the terms and conditions of the GNU General Public -+# License. See the file "COPYING" in the main directory of this archive -+# for more details. -+# -+# Copyright (C) 2006 FON Technology, SL. -+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> -+# -+ -+obj-y += board.o prom.o devices.o -+obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o -+obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o ---- /dev/null -+++ b/arch/mips/ar231x/board.c -@@ -0,0 +1,259 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. -+ * Copyright (C) 2006 FON Technology, SL. -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> -+ */ -+ -+#include <generated/autoconf.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/string.h> -+#include <linux/platform_device.h> -+#include <linux/kernel.h> -+#include <linux/random.h> -+#include <linux/etherdevice.h> -+#include <linux/irq.h> -+#include <asm/irq_cpu.h> -+#include <asm/reboot.h> -+#include <asm/io.h> -+ -+#include <ar231x_platform.h> -+#include "devices.h" -+#include "ar5312.h" -+#include "ar2315.h" -+ -+void (*ar231x_irq_dispatch)(void); -+ -+static inline bool -+check_radio_magic(u8 *addr) -+{ -+ addr += 0x7a; /* offset for flash magic */ -+ if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) { -+ return 1; -+ } -+ return 0; -+} -+ -+static inline bool -+check_board_data(u8 *flash_limit, u8 *addr, bool broken) -+{ -+ /* config magic found */ -+ if (*((u32 *)addr) == AR531X_BD_MAGIC) -+ return 1; -+ -+ if (!broken) -+ return 0; -+ -+ if (check_radio_magic(addr + 0xf8)) -+ ar231x_board.radio = addr + 0xf8; -+ if ((addr < flash_limit + 0x10000) && -+ check_radio_magic(addr + 0x10000)) -+ ar231x_board.radio = addr + 0x10000; -+ -+ if (ar231x_board.radio) { -+ /* broken board data detected, use radio data to find the offset, -+ * user will fix this */ -+ return 1; -+ } -+ return 0; -+} -+ -+static u8 * -+find_board_config(u8 *flash_limit, bool broken) -+{ -+ u8 *addr; -+ int found = 0; -+ -+ for (addr = flash_limit - 0x1000; -+ addr >= flash_limit - 0x30000; -+ addr -= 0x1000) { -+ -+ if (check_board_data(flash_limit, addr, broken)) { -+ found = 1; -+ break; -+ } -+ } -+ -+ if (!found) -+ addr = NULL; -+ -+ return addr; -+} -+ -+static u8 * -+find_radio_config(u8 *flash_limit, u8 *board_config) -+{ -+ int found; -+ u8 *radio_config; -+ -+ /* -+ * Now find the start of Radio Configuration data, using heuristics: -+ * Search forward from Board Configuration data by 0x1000 bytes -+ * at a time until we find non-0xffffffff. -+ */ -+ found = 0; -+ for (radio_config = board_config + 0x1000; -+ (radio_config < flash_limit); -+ radio_config += 0x1000) { -+ if ((*(u32 *)radio_config != 0xffffffff) && -+ check_radio_magic(radio_config)) { -+ found = 1; -+ break; -+ } -+ } -+ -+ /* AR2316 relocates radio config to new location */ -+ if (!found) { -+ for (radio_config = board_config + 0xf8; -+ (radio_config < flash_limit - 0x1000 + 0xf8); -+ radio_config += 0x1000) { -+ if ((*(u32 *)radio_config != 0xffffffff) && -+ check_radio_magic(radio_config)) { -+ found = 1; -+ break; -+ } -+ } -+ } -+ -+ if (!found) { -+ printk("Could not find Radio Configuration data\n"); -+ radio_config = 0; -+ } -+ -+ return (u8 *) radio_config; -+} -+ -+int __init -+ar231x_find_config(u8 *flash_limit) -+{ -+ struct ar231x_boarddata *config; -+ unsigned int rcfg_size; -+ int broken_boarddata = 0; -+ u8 *bcfg, *rcfg; -+ u8 *board_data; -+ u8 *radio_data; -+ u8 *mac_addr; -+ u32 offset; -+ -+ ar231x_board.config = NULL; -+ ar231x_board.radio = NULL; -+ /* Copy the board and radio data to RAM, because accessing the mapped -+ * memory of the flash directly after booting is not safe */ -+ -+ /* Try to find valid board and radio data */ -+ bcfg = find_board_config(flash_limit, false); -+ -+ /* If that fails, try to at least find valid radio data */ -+ if (!bcfg) { -+ bcfg = find_board_config(flash_limit, true); -+ broken_boarddata = 1; -+ } -+ -+ if (!bcfg) { -+ printk(KERN_WARNING "WARNING: No board configuration data found!\n"); -+ return -ENODEV; -+ } -+ -+ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL); -+ ar231x_board.config = (struct ar231x_boarddata *) board_data; -+ memcpy(board_data, bcfg, 0x100); -+ if (broken_boarddata) { -+ printk(KERN_WARNING "WARNING: broken board data detected\n"); -+ config = ar231x_board.config; -+ if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) { -+ printk(KERN_INFO "Fixing up empty mac addresses\n"); -+ config->resetConfigGpio = 0xffff; -+ config->sysLedGpio = 0xffff; -+ random_ether_addr(config->wlan0_mac); -+ config->wlan0_mac[0] &= ~0x06; -+ random_ether_addr(config->enet0_mac); -+ random_ether_addr(config->enet1_mac); -+ } -+ } -+ -+ -+ /* Radio config starts 0x100 bytes after board config, regardless -+ * of what the physical layout on the flash chip looks like */ -+ -+ if (ar231x_board.radio) -+ rcfg = (u8 *) ar231x_board.radio; -+ else -+ rcfg = find_radio_config(flash_limit, bcfg); -+ -+ if (!rcfg) -+ return -ENODEV; -+ -+ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff); -+ ar231x_board.radio = radio_data; -+ offset = radio_data - board_data; -+ printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset); -+ rcfg_size = BOARD_CONFIG_BUFSZ - offset; -+ memcpy(radio_data, rcfg, rcfg_size); -+ -+ mac_addr = &radio_data[0x1d * 2]; -+ if (is_broadcast_ether_addr(mac_addr)) { -+ printk(KERN_INFO "Radio MAC is blank; using board-data\n"); -+ memcpy(mac_addr, ar231x_board.config->wlan0_mac, ETH_ALEN); -+ } -+ -+ return 0; -+} -+ -+static void -+ar231x_halt(void) -+{ -+ local_irq_disable(); -+ while (1); -+} -+ -+void __init -+plat_mem_setup(void) -+{ -+ _machine_halt = ar231x_halt; -+ pm_power_off = ar231x_halt; -+ -+ ar5312_plat_setup(); -+ ar2315_plat_setup(); -+ -+ /* Disable data watchpoints */ -+ write_c0_watchlo0(0); -+} -+ -+ -+asmlinkage void -+plat_irq_dispatch(void) -+{ -+ ar231x_irq_dispatch(); -+} -+ -+void __init -+plat_time_init(void) -+{ -+ ar5312_time_init(); -+ ar2315_time_init(); -+} -+ -+unsigned int __cpuinit -+get_c0_compare_int(void) -+{ -+ return CP0_LEGACY_COMPARE_IRQ; -+} -+ -+void __init -+arch_init_irq(void) -+{ -+ clear_c0_status(ST0_IM); -+ mips_cpu_irq_init(); -+ -+ /* Initialize interrupt controllers */ -+ ar5312_irq_init(); -+ ar2315_irq_init(); -+} -+ -+ ---- /dev/null -+++ b/arch/mips/ar231x/prom.c -@@ -0,0 +1,37 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright MontaVista Software Inc -+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. -+ * Copyright (C) 2006 FON Technology, SL. -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> -+ */ -+ -+/* -+ * Prom setup file for ar531x -+ */ -+ -+#include <linux/init.h> -+#include <generated/autoconf.h> -+#include <linux/kernel.h> -+#include <linux/string.h> -+#include <linux/mm.h> -+#include <linux/bootmem.h> -+ -+#include <asm/bootinfo.h> -+#include <asm/addrspace.h> -+#include "ar5312.h" -+#include "ar2315.h" -+ -+void __init prom_init(void) -+{ -+ ar5312_prom_init(); -+ ar2315_prom_init(); -+} -+ -+void __init prom_free_prom_memory(void) -+{ -+} ---- /dev/null -+++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h -@@ -0,0 +1,83 @@ -+#ifndef __AR531X_PLATFORM_H -+#define __AR531X_PLATFORM_H -+ -+/* -+ * This is board-specific data that is stored in a "fixed" location in flash. -+ * It is shared across operating systems, so it should not be changed lightly. -+ * The main reason we need it is in order to extract the ethernet MAC -+ * address(es). -+ */ -+struct ar231x_boarddata { -+ u32 magic; /* board data is valid */ -+#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */ -+ u16 cksum; /* checksum (starting with BD_REV 2) */ -+ u16 rev; /* revision of this struct */ -+#define BD_REV 4 -+ char boardName[64]; /* Name of board */ -+ u16 major; /* Board major number */ -+ u16 minor; /* Board minor number */ -+ u32 flags; /* Board configuration */ -+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ -+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ -+#define BD_UART1 0x00000004 /* UART1 is stuffed */ -+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ -+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ -+#define BD_SYSLED 0x00000020 /* System LED stuffed */ -+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ -+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ -+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ -+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ -+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ -+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ -+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ -+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ -+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ -+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ -+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ -+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ -+ u16 resetConfigGpio; /* Reset factory GPIO pin */ -+ u16 sysLedGpio; /* System LED GPIO pin */ -+ -+ u32 cpuFreq; /* CPU core frequency in Hz */ -+ u32 sysFreq; /* System frequency in Hz */ -+ u32 cntFreq; /* Calculated C0_COUNT frequency */ -+ -+ u8 wlan0_mac[6]; -+ u8 enet0_mac[6]; -+ u8 enet1_mac[6]; -+ -+ u16 pciId; /* Pseudo PCIID for common code */ -+ u16 memCap; /* cap bank1 in MB */ -+ -+ /* version 3 */ -+ u8 wlan1_mac[6]; /* (ar5212) */ -+}; -+ -+#define BOARD_CONFIG_BUFSZ 0x1000 -+ -+/* -+ * Platform device information for the Wireless MAC -+ */ -+struct ar231x_board_config { -+ u16 devid; -+ -+ /* board config data */ -+ struct ar231x_boarddata *config; -+ -+ /* radio calibration data */ -+ const char *radio; -+}; -+ -+/* -+ * Platform device information for the Ethernet MAC -+ */ -+struct ar231x_eth { -+ u32 reset_base; -+ u32 reset_mac; -+ u32 reset_phy; -+ u32 phy_base; -+ struct ar231x_board_config *config; -+ char *macaddr; -+}; -+ -+#endif /* __AR531X_PLATFORM_H */ ---- /dev/null -+++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h -@@ -0,0 +1,84 @@ -+/* -+ * Atheros SoC specific CPU feature overrides -+ * -+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * This file was derived from: include/asm-mips/cpu-features.h -+ * Copyright (C) 2003, 2004 Ralf Baechle -+ * Copyright (C) 2004 Maciej W. Rozycki -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ */ -+#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H -+#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H -+ -+/* -+ * The ATHEROS SoCs have MIPS 4Kc/4KEc core. -+ */ -+#define cpu_has_tlb 1 -+#define cpu_has_4kex 1 -+#define cpu_has_3k_cache 0 -+#define cpu_has_4k_cache 1 -+#define cpu_has_tx39_cache 0 -+#define cpu_has_sb1_cache 0 -+#define cpu_has_fpu 0 -+#define cpu_has_32fpr 0 -+#define cpu_has_counter 1 -+/* #define cpu_has_watch ? */ -+/* #define cpu_has_divec ? */ -+/* #define cpu_has_vce ? */ -+/* #define cpu_has_cache_cdex_p ? */ -+/* #define cpu_has_cache_cdex_s ? */ -+/* #define cpu_has_prefetch ? */ -+/* #define cpu_has_mcheck ? */ -+#define cpu_has_ejtag 1 -+ -+#if !defined(CONFIG_ATHEROS_AR5312) -+# define cpu_has_llsc 1 -+#else -+/* -+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the -+ * ll/sc instructions. -+ */ -+# define cpu_has_llsc 0 -+#endif -+ -+#define cpu_has_mips16 0 -+#define cpu_has_mdmx 0 -+#define cpu_has_mips3d 0 -+#define cpu_has_smartmips 0 -+ -+/* #define cpu_has_vtag_icache ? */ -+/* #define cpu_has_dc_aliases ? */ -+/* #define cpu_has_ic_fills_f_dc ? */ -+/* #define cpu_has_pindexed_dcache ? */ -+ -+/* #define cpu_icache_snoops_remote_store ? */ -+ -+#define cpu_has_mips32r1 1 -+ -+#if !defined(CONFIG_ATHEROS_AR5312) -+# define cpu_has_mips32r2 1 -+#endif -+ -+#define cpu_has_mips64r1 0 -+#define cpu_has_mips64r2 0 -+ -+#define cpu_has_dsp 0 -+#define cpu_has_mipsmt 0 -+ -+/* #define cpu_has_nofpuex ? */ -+#define cpu_has_64bits 0 -+#define cpu_has_64bit_zero_reg 0 -+#define cpu_has_64bit_gp_regs 0 -+#define cpu_has_64bit_addresses 0 -+ -+/* #define cpu_has_inclusive_pcaches ? */ -+ -+/* #define cpu_dcache_line_size() ? */ -+/* #define cpu_icache_line_size() ? */ -+ -+#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */ ---- /dev/null -+++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h -@@ -0,0 +1,76 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org> -+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> -+ * -+ */ -+#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H -+#define __ASM_MACH_GENERIC_DMA_COHERENCE_H -+ -+#define PCI_DMA_OFFSET 0x20000000 -+ -+#include <linux/device.h> -+ -+static inline dma_addr_t ar231x_dev_offset(struct device *dev) -+{ -+#ifdef CONFIG_PCI -+ extern struct bus_type pci_bus_type; -+ -+ if (dev && dev->bus == &pci_bus_type) -+ return PCI_DMA_OFFSET; -+ else -+#endif -+ return 0; -+} -+ -+static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) -+{ -+ return virt_to_phys(addr) + ar231x_dev_offset(dev); -+} -+ -+static inline dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) -+{ -+ return page_to_phys(page) + ar231x_dev_offset(dev); -+} -+ -+static inline unsigned long plat_dma_addr_to_phys(struct device *dev, -+ dma_addr_t dma_addr) -+{ -+ return dma_addr - ar231x_dev_offset(dev); -+} -+ -+static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, -+ size_t size, enum dma_data_direction direction) -+{ -+} -+ -+static inline int plat_dma_supported(struct device *dev, u64 mask) -+{ -+ return 1; -+} -+ -+static inline void plat_extra_sync_for_device(struct device *dev) -+{ -+ return; -+} -+ -+static inline int plat_dma_mapping_error(struct device *dev, -+ dma_addr_t dma_addr) -+{ -+ return 0; -+} -+ -+static inline int plat_device_is_coherent(struct device *dev) -+{ -+#ifdef CONFIG_DMA_COHERENT -+ return 1; -+#endif -+#ifdef CONFIG_DMA_NONCOHERENT -+ return 0; -+#endif -+} -+ -+#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */ ---- /dev/null -+++ b/arch/mips/include/asm/mach-ar231x/gpio.h -@@ -0,0 +1,28 @@ -+#ifndef _ATHEROS_GPIO_H_ -+#define _ATHEROS_GPIO_H_ -+ -+#include <ar231x.h> -+ -+#define gpio_get_value __gpio_get_value -+#define gpio_set_value __gpio_set_value -+#define gpio_cansleep __gpio_cansleep -+ -+/* -+ * Wrappers for the generic GPIO layer -+ */ -+ -+/* not sure if these are used? */ -+ -+/* Returns IRQ to attach for gpio. Unchecked function */ -+static inline int gpio_to_irq(unsigned gpio) { -+ return AR531X_GPIO_IRQ(gpio); -+} -+ -+/* Returns gpio for IRQ attached. Unchecked function */ -+static inline int irq_to_gpio(unsigned irq) { -+ return (irq - (AR531X_GPIO_IRQ(0))); -+} -+ -+#include <asm-generic/gpio.h> /* cansleep wrappers */ -+ -+#endif ---- /dev/null -+++ b/arch/mips/include/asm/mach-ar231x/reset.h -@@ -0,0 +1,6 @@ -+#ifndef __AR531X_RESET_H -+#define __AR531X_RESET_H -+ -+void ar531x_disable_reset_button(void); -+ -+#endif /* __AR531X_RESET_H */ ---- /dev/null -+++ b/arch/mips/include/asm/mach-ar231x/war.h -@@ -0,0 +1,25 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org> -+ */ -+#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H -+#define __ASM_MIPS_MACH_ATHEROS_WAR_H -+ -+#define R4600_V1_INDEX_ICACHEOP_WAR 0 -+#define R4600_V1_HIT_CACHEOP_WAR 0 -+#define R4600_V2_HIT_CACHEOP_WAR 0 -+#define R5432_CP0_INTERRUPT_WAR 0 -+#define BCM1250_M3_WAR 0 -+#define SIBYTE_1956_WAR 0 -+#define MIPS4K_ICACHE_REFILL_WAR 0 -+#define MIPS_CACHE_SYNC_WAR 0 -+#define TX49XX_ICACHE_INDEX_INV_WAR 0 -+#define RM9000_CDEX_SMP_WAR 0 -+#define ICACHE_REFILLS_WORKAROUND_WAR 0 -+#define R10000_LLSC_WAR 0 -+#define MIPS34K_MISSED_ITLB_WAR 0 -+ -+#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */ ---- /dev/null -+++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h -@@ -0,0 +1,580 @@ -+/* -+ * Register definitions for AR2315+ -+ * -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. -+ * Copyright (C) 2006 FON Technology, SL. -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org> -+ */ -+ -+#ifndef __AR2315_REG_H -+#define __AR2315_REG_H -+ -+/* -+ * IRQs -+ */ -+#define AR2315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ -+#define AR2315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ -+#define AR2315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ -+#define AR2315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ -+#define AR2315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ -+ -+/* -+ * Address map -+ */ -+#define AR2315_SPI_READ 0x08000000 /* SPI FLASH */ -+#define AR2315_WLAN0 0x10000000 /* Wireless MMR */ -+#define AR2315_PCI 0x10100000 /* PCI MMR */ -+#define AR2315_SDRAMCTL 0x10300000 /* SDRAM MMR */ -+#define AR2315_LOCAL 0x10400000 /* LOCAL BUS MMR */ -+#define AR2315_ENET0 0x10500000 /* ETHERNET MMR */ -+#define AR2315_DSLBASE 0x11000000 /* RESET CONTROL MMR */ -+#define AR2315_UART0 0x11100003 /* UART MMR */ -+#define AR2315_SPI 0x11300000 /* SPI FLASH MMR */ -+#define AR2315_PCIEXT 0x80000000 /* pci external */ -+ -+/* -+ * Reset Register -+ */ -+#define AR2315_COLD_RESET (AR2315_DSLBASE + 0x0000) -+ -+#define AR2315_RESET_COLD_AHB 0x00000001 -+#define AR2315_RESET_COLD_APB 0x00000002 -+#define AR2315_RESET_COLD_CPU 0x00000004 -+#define AR2315_RESET_COLD_CPUWARM 0x00000008 -+#define AR2315_RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */ -+#define AR2317_RESET_SYSTEM 0x00000010 -+ -+ -+#define AR2315_RESET (AR2315_DSLBASE + 0x0004) -+ -+#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */ -+#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */ -+#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */ -+#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */ -+#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */ -+#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */ -+#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */ -+#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI interface */ -+#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */ -+#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */ -+#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */ -+#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */ -+ -+/* -+ * AHB master arbitration control -+ */ -+#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008) -+ -+#define AR2315_ARB_CPU 0x00000001 /* CPU, default */ -+#define AR2315_ARB_WLAN 0x00000002 /* WLAN */ -+#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ -+#define AR2315_ARB_LOCAL 0x00000008 /* LOCAL */ -+#define AR2315_ARB_PCI 0x00000010 /* PCI */ -+#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */ -+#define AR2315_ARB_RETRY 0x00000100 /* retry policy, debug only */ -+ -+/* -+ * Config Register -+ */ -+#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c) -+ -+#define AR2315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */ -+#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */ -+#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */ -+#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */ -+#define AR2315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */ -+#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */ -+#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */ -+ -+#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */ -+#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */ -+#define AR2315_CONFIG_PCIAHB 0x00000800 -+#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000 -+#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */ -+#define AR2315_CONFIG_CPU_DRAM 0x00010000 -+#define AR2315_CONFIG_CPU_PCI 0x00020000 -+#define AR2315_CONFIG_CPU_MMR 0x00040000 -+#define AR2315_CONFIG_BIG 0x00000400 -+ -+ -+/* -+ * NMI control -+ */ -+#define AR2315_NMI_CTL (AR2315_DSLBASE + 0x0010) -+ -+#define AR2315_NMI_EN 1 -+ -+/* -+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0). -+ */ -+#define AR2315_SREV (AR2315_DSLBASE + 0x0014) -+ -+#define AR2315_REV_MAJ 0x00f0 -+#define AR2315_REV_MAJ_S 4 -+#define AR2315_REV_MIN 0x000f -+#define AR2315_REV_MIN_S 0 -+#define AR2315_REV_CHIP (AR2315_REV_MAJ|AR2315_REV_MIN) -+ -+/* -+ * Interface Enable -+ */ -+#define AR2315_IF_CTL (AR2315_DSLBASE + 0x0018) -+ -+#define AR2315_IF_MASK 0x00000007 -+#define AR2315_IF_DISABLED 0 -+#define AR2315_IF_PCI 1 -+#define AR2315_IF_TS_LOCAL 2 -+#define AR2315_IF_ALL 3 /* only for emulation with separate pins */ -+#define AR2315_IF_LOCAL_HOST 0x00000008 -+#define AR2315_IF_PCI_HOST 0x00000010 -+#define AR2315_IF_PCI_INTR 0x00000020 -+#define AR2315_IF_PCI_CLK_MASK 0x00030000 -+#define AR2315_IF_PCI_CLK_INPUT 0 -+#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1 -+#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2 -+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3 -+#define AR2315_IF_PCI_CLK_SHIFT 16 -+ -+/* -+ * APB Interrupt control -+ */ -+ -+#define AR2315_ISR (AR2315_DSLBASE + 0x0020) -+#define AR2315_IMR (AR2315_DSLBASE + 0x0024) -+#define AR2315_GISR (AR2315_DSLBASE + 0x0028) -+ -+#define AR2315_ISR_UART0 0x0001 /* high speed UART */ -+#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */ -+#define AR2315_ISR_SPI 0x0004 /* SPI bus */ -+#define AR2315_ISR_AHB 0x0008 /* AHB error */ -+#define AR2315_ISR_APB 0x0010 /* APB error */ -+#define AR2315_ISR_TIMER 0x0020 /* timer */ -+#define AR2315_ISR_GPIO 0x0040 /* GPIO */ -+#define AR2315_ISR_WD 0x0080 /* watchdog */ -+#define AR2315_ISR_IR_RSVD 0x0100 /* IR */ -+ -+#define AR2315_GISR_MISC 0x0001 -+#define AR2315_GISR_WLAN0 0x0002 -+#define AR2315_GISR_MPEGTS_RSVD 0x0004 -+#define AR2315_GISR_LOCALPCI 0x0008 -+#define AR2315_GISR_WMACPOLL 0x0010 -+#define AR2315_GISR_TIMER 0x0020 -+#define AR2315_GISR_ETHERNET 0x0040 -+ -+/* -+ * Interrupt routing from IO to the processor IP bits -+ * Define our inter mask and level -+ */ -+#define AR2315_INTR_MISCIO SR_IBIT3 -+#define AR2315_INTR_WLAN0 SR_IBIT4 -+#define AR2315_INTR_ENET0 SR_IBIT5 -+#define AR2315_INTR_LOCALPCI SR_IBIT6 -+#define AR2315_INTR_WMACPOLL SR_IBIT7 -+#define AR2315_INTR_COMPARE SR_IBIT8 -+ -+/* -+ * Timers -+ */ -+#define AR2315_TIMER (AR2315_DSLBASE + 0x0030) -+#define AR2315_RELOAD (AR2315_DSLBASE + 0x0034) -+#define AR2315_WD (AR2315_DSLBASE + 0x0038) -+#define AR2315_WDC (AR2315_DSLBASE + 0x003c) -+ -+#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000 -+#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */ -+#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */ -+ -+/* -+ * CPU Performance Counters -+ */ -+#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048) -+#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c) -+ -+#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */ -+#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */ -+#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */ -+#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */ -+#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */ -+#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */ -+#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */ -+ -+#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */ -+#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */ -+#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */ -+#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */ -+#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */ -+#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */ -+#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */ -+ -+/* -+ * AHB Error Reporting. -+ */ -+#define AR2315_AHB_ERR0 (AR2315_DSLBASE + 0x0050) /* error */ -+#define AR2315_AHB_ERR1 (AR2315_DSLBASE + 0x0054) /* haddr */ -+#define AR2315_AHB_ERR2 (AR2315_DSLBASE + 0x0058) /* hwdata */ -+#define AR2315_AHB_ERR3 (AR2315_DSLBASE + 0x005c) /* hrdata */ -+#define AR2315_AHB_ERR4 (AR2315_DSLBASE + 0x0060) /* status */ -+ -+#define AHB_ERROR_DET 1 /* AHB Error has been detected, */ -+ /* write 1 to clear all bits in ERR0 */ -+#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */ -+#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */ -+ -+#define AR2315_PROCERR_HMAST 0x0000000f -+#define AR2315_PROCERR_HMAST_DFLT 0 -+#define AR2315_PROCERR_HMAST_WMAC 1 -+#define AR2315_PROCERR_HMAST_ENET 2 -+#define AR2315_PROCERR_HMAST_PCIENDPT 3 -+#define AR2315_PROCERR_HMAST_LOCAL 4 -+#define AR2315_PROCERR_HMAST_CPU 5 -+#define AR2315_PROCERR_HMAST_PCITGT 6 -+ -+#define AR2315_PROCERR_HMAST_S 0 -+#define AR2315_PROCERR_HWRITE 0x00000010 -+#define AR2315_PROCERR_HSIZE 0x00000060 -+#define AR2315_PROCERR_HSIZE_S 5 -+#define AR2315_PROCERR_HTRANS 0x00000180 -+#define AR2315_PROCERR_HTRANS_S 7 -+#define AR2315_PROCERR_HBURST 0x00000e00 -+#define AR2315_PROCERR_HBURST_S 9 -+ -+/* -+ * Clock Control -+ */ -+#define AR2315_PLLC_CTL (AR2315_DSLBASE + 0x0064) -+#define AR2315_PLLV_CTL (AR2315_DSLBASE + 0x0068) -+#define AR2315_CPUCLK (AR2315_DSLBASE + 0x006c) -+#define AR2315_AMBACLK (AR2315_DSLBASE + 0x0070) -+#define AR2315_SYNCCLK (AR2315_DSLBASE + 0x0074) -+#define AR2315_DSL_SLEEP_CTL (AR2315_DSLBASE + 0x0080) -+#define AR2315_DSL_SLEEP_DUR (AR2315_DSLBASE + 0x0084) -+ -+/* PLLc Control fields */ -+#define PLLC_REF_DIV_M 0x00000003 -+#define PLLC_REF_DIV_S 0 -+#define PLLC_FDBACK_DIV_M 0x0000007C -+#define PLLC_FDBACK_DIV_S 2 -+#define PLLC_ADD_FDBACK_DIV_M 0x00000080 -+#define PLLC_ADD_FDBACK_DIV_S 7 -+#define PLLC_CLKC_DIV_M 0x0001c000 -+#define PLLC_CLKC_DIV_S 14 -+#define PLLC_CLKM_DIV_M 0x00700000 -+#define PLLC_CLKM_DIV_S 20 -+ -+/* CPU CLK Control fields */ -+#define CPUCLK_CLK_SEL_M 0x00000003 -+#define CPUCLK_CLK_SEL_S 0 -+#define CPUCLK_CLK_DIV_M 0x0000000c -+#define CPUCLK_CLK_DIV_S 2 -+ -+/* AMBA CLK Control fields */ -+#define AMBACLK_CLK_SEL_M 0x00000003 -+#define AMBACLK_CLK_SEL_S 0 -+#define AMBACLK_CLK_DIV_M 0x0000000c -+#define AMBACLK_CLK_DIV_S 2 -+ -+/* -+ * GPIO -+ */ -+#define AR2315_GPIO_DI (AR2315_DSLBASE + 0x0088) -+#define AR2315_GPIO_DO (AR2315_DSLBASE + 0x0090) -+#define AR2315_GPIO_CR (AR2315_DSLBASE + 0x0098) -+#define AR2315_GPIO_INT (AR2315_DSLBASE + 0x00a0) -+ -+#define AR2315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -+#define AR2315_GPIO_CR_O(x) (1 << (x)) /* output */ -+#define AR2315_GPIO_CR_I(x) (0) /* input */ -+ -+#define AR2315_GPIO_INT_S(x) (x) /* interrupt enable */ -+#define AR2315_GPIO_INT_M (0x3F) /* mask for int */ -+#define AR2315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */ -+#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */ -+ -+#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */ -+#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */ -+#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */ -+#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */ -+#define AR2315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */ -+ -+#define AR2315_RESET_GPIO 5 -+#define AR2315_NUM_GPIO 22 -+ -+/* -+ * PCI Clock Control -+ */ -+#define AR2315_PCICLK (AR2315_DSLBASE + 0x00a4) -+ -+#define AR2315_PCICLK_INPUT_M 0x3 -+#define AR2315_PCICLK_INPUT_S 0 -+ -+#define AR2315_PCICLK_PLLC_CLKM 0 -+#define AR2315_PCICLK_PLLC_CLKM1 1 -+#define AR2315_PCICLK_PLLC_CLKC 2 -+#define AR2315_PCICLK_REF_CLK 3 -+ -+#define AR2315_PCICLK_DIV_M 0xc -+#define AR2315_PCICLK_DIV_S 2 -+ -+#define AR2315_PCICLK_IN_FREQ 0 -+#define AR2315_PCICLK_IN_FREQ_DIV_6 1 -+#define AR2315_PCICLK_IN_FREQ_DIV_8 2 -+#define AR2315_PCICLK_IN_FREQ_DIV_10 3 -+ -+/* -+ * Observation Control Register -+ */ -+#define AR2315_OCR (AR2315_DSLBASE + 0x00b0) -+#define OCR_GPIO0_IRIN 0x0040 -+#define OCR_GPIO1_IROUT 0x0080 -+#define OCR_GPIO3_RXCLR 0x0200 -+ -+/* -+ * General Clock Control -+ */ -+ -+#define AR2315_MISCCLK (AR2315_DSLBASE + 0x00b4) -+#define MISCCLK_PLLBYPASS_EN 0x00000001 -+#define MISCCLK_PROCREFCLK 0x00000002 -+ -+/* -+ * SDRAM Controller -+ * - No read or write buffers are included. -+ */ -+#define AR2315_MEM_CFG (AR2315_SDRAMCTL + 0x00) -+#define AR2315_MEM_CTRL (AR2315_SDRAMCTL + 0x0c) -+#define AR2315_MEM_REF (AR2315_SDRAMCTL + 0x10) -+ -+#define SDRAM_DATA_WIDTH_M 0x00006000 -+#define SDRAM_DATA_WIDTH_S 13 -+ -+#define SDRAM_COL_WIDTH_M 0x00001E00 -+#define SDRAM_COL_WIDTH_S 9 -+ -+#define SDRAM_ROW_WIDTH_M 0x000001E0 -+#define SDRAM_ROW_WIDTH_S 5 -+ -+#define SDRAM_BANKADDR_BITS_M 0x00000018 -+#define SDRAM_BANKADDR_BITS_S 3 -+ -+/* -+ * SPI Flash Interface Registers -+ */ -+ -+#define AR2315_SPI_CTL (AR2315_SPI + 0x00) -+#define AR2315_SPI_OPCODE (AR2315_SPI + 0x04) -+#define AR2315_SPI_DATA (AR2315_SPI + 0x08) -+ -+#define SPI_CTL_START 0x00000100 -+#define SPI_CTL_BUSY 0x00010000 -+#define SPI_CTL_TXCNT_MASK 0x0000000f -+#define SPI_CTL_RXCNT_MASK 0x000000f0 -+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff -+#define SPI_CTL_SIZE_MASK 0x00060000 -+ -+#define SPI_CTL_CLK_SEL_MASK 0x03000000 -+#define SPI_OPCODE_MASK 0x000000ff -+ -+/* -+ * PCI Bus Interface Registers -+ */ -+#define AR2315_PCI_1MS_REG (AR2315_PCI + 0x0008) -+#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ -+ -+#define AR2315_PCI_MISC_CONFIG (AR2315_PCI + 0x000c) -+#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */ -+#define AR2315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */ -+#define AR2315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */ -+#define AR2315_PCIMISC_RST_MODE 0x00000030 -+#define AR2315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */ -+#define AR2315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */ -+#define AR2315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */ -+#define AR2315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */ -+#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */ -+#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */ -+#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */ -+#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */ -+ -+#define AR2315_PCI_OUT_TSTAMP (AR2315_PCI + 0x0010) -+ -+#define AR2315_PCI_UNCACHE_CFG (AR2315_PCI + 0x0014) -+ -+#define AR2315_PCI_IN_EN (AR2315_PCI + 0x0100) -+#define AR2315_PCI_IN_EN0 0x01 /* Enable chain 0 */ -+#define AR2315_PCI_IN_EN1 0x02 /* Enable chain 1 */ -+#define AR2315_PCI_IN_EN2 0x04 /* Enable chain 2 */ -+#define AR2315_PCI_IN_EN3 0x08 /* Enable chain 3 */ -+ -+#define AR2315_PCI_IN_DIS (AR2315_PCI + 0x0104) -+#define AR2315_PCI_IN_DIS0 0x01 /* Disable chain 0 */ -+#define AR2315_PCI_IN_DIS1 0x02 /* Disable chain 1 */ -+#define AR2315_PCI_IN_DIS2 0x04 /* Disable chain 2 */ -+#define AR2315_PCI_IN_DIS3 0x08 /* Disable chain 3 */ -+ -+#define AR2315_PCI_IN_PTR (AR2315_PCI + 0x0200) -+ -+#define AR2315_PCI_OUT_EN (AR2315_PCI + 0x0400) -+#define AR2315_PCI_OUT_EN0 0x01 /* Enable chain 0 */ -+ -+#define AR2315_PCI_OUT_DIS (AR2315_PCI + 0x0404) -+#define AR2315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */ -+ -+#define AR2315_PCI_OUT_PTR (AR2315_PCI + 0x0408) -+ -+#define AR2315_PCI_INT_STATUS (AR2315_PCI + 0x0500) /* write one to clr */ -+#define AR2315_PCI_TXINT 0x00000001 /* Desc In Completed */ -+#define AR2315_PCI_TXOK 0x00000002 /* Desc In OK */ -+#define AR2315_PCI_TXERR 0x00000004 /* Desc In ERR */ -+#define AR2315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */ -+#define AR2315_PCI_RXINT 0x00000010 /* Desc Out Completed */ -+#define AR2315_PCI_RXOK 0x00000020 /* Desc Out OK */ -+#define AR2315_PCI_RXERR 0x00000040 /* Desc Out ERR */ -+#define AR2315_PCI_RXEOL 0x00000080 /* Desc Out EOL */ -+#define AR2315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */ -+#define AR2315_PCI_MASK 0x0000FFFF /* Desc Mask */ -+#define AR2315_PCI_EXT_INT 0x02000000 -+#define AR2315_PCI_ABORT_INT 0x04000000 -+ -+#define AR2315_PCI_INT_MASK (AR2315_PCI + 0x0504) /* same as INT_STATUS */ -+ -+#define AR2315_PCI_INTEN_REG (AR2315_PCI + 0x0508) -+#define AR2315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */ -+#define AR2315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */ -+ -+#define AR2315_PCI_HOST_IN_EN (AR2315_PCI + 0x0800) -+#define AR2315_PCI_HOST_IN_DIS (AR2315_PCI + 0x0804) -+#define AR2315_PCI_HOST_IN_PTR (AR2315_PCI + 0x0810) -+#define AR2315_PCI_HOST_OUT_EN (AR2315_PCI + 0x0900) -+#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904) -+#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908) -+ -+ -+/* -+ * Local Bus Interface Registers -+ */ -+#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000) -+#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */ -+#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ -+#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ -+#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */ -+#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */ -+#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */ -+#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */ -+#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */ -+#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */ -+#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */ -+#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */ -+#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */ -+#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */ -+#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */ -+#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */ -+#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */ -+#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */ -+#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */ -+#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */ -+#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */ -+#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */ -+#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */ -+#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */ -+#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ -+#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ -+ -+#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004) -+#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */ -+ -+#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008) -+#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ -+ -+#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C) -+#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ -+#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ -+#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ -+#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */ -+#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */ -+#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80 -+#define AR2315_LBM_TIMEOUT_SHFT 7 -+#define AR2315_LBM_PORTMUX 0x07000000 -+ -+ -+#define AR2315_LB_RXTSOFF (AR2315_LOCAL + 0x0010) -+ -+#define AR2315_LB_TX_CHAIN_EN (AR2315_LOCAL + 0x0100) -+#define AR2315_LB_TXEN_0 0x01 -+#define AR2315_LB_TXEN_1 0x02 -+#define AR2315_LB_TXEN_2 0x04 -+#define AR2315_LB_TXEN_3 0x08 -+ -+#define AR2315_LB_TX_CHAIN_DIS (AR2315_LOCAL + 0x0104) -+#define AR2315_LB_TX_DESC_PTR (AR2315_LOCAL + 0x0200) -+ -+#define AR2315_LB_RX_CHAIN_EN (AR2315_LOCAL + 0x0400) -+#define AR2315_LB_RXEN 0x01 -+ -+#define AR2315_LB_RX_CHAIN_DIS (AR2315_LOCAL + 0x0404) -+#define AR2315_LB_RX_DESC_PTR (AR2315_LOCAL + 0x0408) -+ -+#define AR2315_LB_INT_STATUS (AR2315_LOCAL + 0x0500) -+#define AR2315_INT_TX_DESC 0x0001 -+#define AR2315_INT_TX_OK 0x0002 -+#define AR2315_INT_TX_ERR 0x0004 -+#define AR2315_INT_TX_EOF 0x0008 -+#define AR2315_INT_RX_DESC 0x0010 -+#define AR2315_INT_RX_OK 0x0020 -+#define AR2315_INT_RX_ERR 0x0040 -+#define AR2315_INT_RX_EOF 0x0080 -+#define AR2315_INT_TX_TRUNC 0x0100 -+#define AR2315_INT_TX_STARVE 0x0200 -+#define AR2315_INT_LB_TIMEOUT 0x0400 -+#define AR2315_INT_LB_ERR 0x0800 -+#define AR2315_INT_MBOX_WR 0x1000 -+#define AR2315_INT_MBOX_RD 0x2000 -+ -+/* Bit definitions for INT MASK are the same as INT_STATUS */ -+#define AR2315_LB_INT_MASK (AR2315_LOCAL + 0x0504) -+ -+#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508) -+#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600) -+ -+/* -+ * IR Interface Registers -+ */ -+#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000) -+ -+#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */ -+ -+#define AR2315_IR_CONTROL (AR2315_IR + 0x0800) -+#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */ -+#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */ -+#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */ -+#define AR2315_IRCTL_SAMPLECLK_SHFT 1 -+#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */ -+#define AR2315_IRCTL_OUTPUTCLK_SHFT 14 -+ -+#define AR2315_IR_STATUS (AR2315_IR + 0x0804) -+#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */ -+#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */ -+ -+#define AR2315_IR_CONFIG (AR2315_IR + 0x0808) -+#define AR2315_IRCFG_INVIN 0x00000001 /* invert input polarity */ -+#define AR2315_IRCFG_INVOUT 0x00000002 /* invert output polarity */ -+#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */ -+#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */ -+#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */ -+#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */ -+#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */ -+#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */ -+#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */ -+ -+#define HOST_PCI_DEV_ID 3 -+#define HOST_PCI_MBAR0 0x10000000 -+#define HOST_PCI_MBAR1 0x20000000 -+#define HOST_PCI_MBAR2 0x30000000 -+ -+#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1 -+#define PCI_DEVICE_MEM_SPACE 0x800000 -+ -+#endif /* __AR2315_REG_H */ ---- /dev/null -+++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h -@@ -0,0 +1,232 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> -+ */ -+ -+#ifndef AR5312_H -+#define AR5312_H -+ -+#include <asm/addrspace.h> -+ -+/* -+ * IRQs -+ */ -+ -+#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ -+#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ -+#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ -+#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ -+#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ -+ -+ -+/* Address Map */ -+#define AR531X_WLAN0 0x18000000 -+#define AR531X_WLAN1 0x18500000 -+#define AR531X_ENET0 0x18100000 -+#define AR531X_ENET1 0x18200000 -+#define AR531X_SDRAMCTL 0x18300000 -+#define AR531X_FLASHCTL 0x18400000 -+#define AR531X_APBBASE 0x1c000000 -+#define AR531X_FLASH 0x1e000000 -+#define AR531X_UART0 0xbc000003 /* UART MMR */ -+ -+/* -+ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that -+ * should be considered available. The AR5312 supports 2 enet MACS, -+ * even though many reference boards only actually use 1 of them -+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. -+ * The AR2312 supports 1 enet MAC. -+ */ -+#define AR531X_NUM_ENET_MAC 2 -+ -+/* -+ * Need these defines to determine true number of ethernet MACs -+ */ -+#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ -+#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ -+#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ -+ -+/* -+ * AR531X_NUM_WMAC defines the number of Wireless MACs that\ -+ * should be considered available. -+ */ -+#define AR531X_NUM_WMAC 2 -+ -+/* Reset/Timer Block Address Map */ -+#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000) -+#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */ -+#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */ -+#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */ -+#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */ -+#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */ -+#define AR531X_RESET (AR531X_RESETTMR + 0x0020) -+#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064) -+#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c) -+#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070) -+#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074) -+#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078) -+#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c) -+#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */ -+#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */ -+ -+/* AR531X_WD_CTRL register bit field definitions */ -+#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000 -+#define AR531X_WD_CTRL_NMI 0x0001 -+#define AR531X_WD_CTRL_RESET 0x0002 -+ -+/* AR531X_ISR register bit field definitions */ -+#define AR531X_ISR_NONE 0x0000 -+#define AR531X_ISR_TIMER 0x0001 -+#define AR531X_ISR_AHBPROC 0x0002 -+#define AR531X_ISR_AHBDMA 0x0004 -+#define AR531X_ISR_GPIO 0x0008 -+#define AR531X_ISR_UART0 0x0010 -+#define AR531X_ISR_UART0DMA 0x0020 -+#define AR531X_ISR_WD 0x0040 -+#define AR531X_ISR_LOCAL 0x0080 -+ -+/* AR531X_RESET register bit field definitions */ -+#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */ -+#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */ -+#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */ -+#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */ -+#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */ -+#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */ -+#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */ -+#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */ -+#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */ -+#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */ -+#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */ -+#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */ -+#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */ -+#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */ -+#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */ -+#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */ -+#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */ -+#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */ -+ -+#define AR531X_RESET_WMAC0_BITS \ -+ AR531X_RESET_WLAN0 |\ -+ AR531X_RESET_WARM_WLAN0_MAC |\ -+ AR531X_RESET_WARM_WLAN0_BB -+ -+#define AR531X_RESERT_WMAC1_BITS \ -+ AR531X_RESET_WLAN1 |\ -+ AR531X_RESET_WARM_WLAN1_MAC |\ -+ AR531X_RESET_WARM_WLAN1_BB -+ -+/* AR5312_CLOCKCTL1 register bit field definitions */ -+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 -+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 -+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 -+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 -+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 -+ -+/* Valid for AR5312 and AR2312 */ -+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 -+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 -+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 -+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 -+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 -+ -+/* Valid for AR2313 */ -+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 -+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 -+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 -+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 -+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 -+ -+ -+/* AR531X_ENABLE register bit field definitions */ -+#define AR531X_ENABLE_WLAN0 0x0001 -+#define AR531X_ENABLE_ENET0 0x0002 -+#define AR531X_ENABLE_ENET1 0x0004 -+#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */ -+#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */ -+#define AR531X_ENABLE_WLAN1 \ -+ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA) -+ -+/* AR531X_REV register bit field definitions */ -+#define AR531X_REV_WMAC_MAJ 0xf000 -+#define AR531X_REV_WMAC_MAJ_S 12 -+#define AR531X_REV_WMAC_MIN 0x0f00 -+#define AR531X_REV_WMAC_MIN_S 8 -+#define AR531X_REV_MAJ 0x00f0 -+#define AR531X_REV_MAJ_S 4 -+#define AR531X_REV_MIN 0x000f -+#define AR531X_REV_MIN_S 0 -+#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN) -+ -+/* Major revision numbers, bits 7..4 of Revision ID register */ -+#define AR531X_REV_MAJ_AR5312 0x4 -+#define AR531X_REV_MAJ_AR2313 0x5 -+ -+/* Minor revision numbers, bits 3..0 of Revision ID register */ -+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ -+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ -+ -+/* AR531X_FLASHCTL register bit field definitions */ -+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */ -+#define FLASHCTL_IDCY_S 0 -+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */ -+#define FLASHCTL_WST1_S 5 -+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */ -+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */ -+#define FLASHCTL_WST2_S 11 -+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */ -+#define FLASHCTL_AC_S 16 -+#define FLASHCTL_AC_128K 0x00000000 -+#define FLASHCTL_AC_256K 0x00010000 -+#define FLASHCTL_AC_512K 0x00020000 -+#define FLASHCTL_AC_1M 0x00030000 -+#define FLASHCTL_AC_2M 0x00040000 -+#define FLASHCTL_AC_4M 0x00050000 -+#define FLASHCTL_AC_8M 0x00060000 -+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */ -+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */ -+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */ -+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */ -+#define FLASHCTL_WP 0x04000000 /* Write protect */ -+#define FLASHCTL_BM 0x08000000 /* Burst mode */ -+#define FLASHCTL_MW 0x30000000 /* Memory width */ -+#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */ -+#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */ -+#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */ -+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */ -+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */ -+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */ -+ -+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */ -+#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00) -+#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04) -+#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08) -+ -+/* ARM SDRAM Controller -- just enough to determine memory size */ -+#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04) -+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */ -+#define MEM_CFG1_AC0_S 8 -+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */ -+#define MEM_CFG1_AC1_S 12 -+ -+/* GPIO Address Map */ -+#define AR531X_GPIO (AR531X_APBBASE + 0x2000) -+#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */ -+#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */ -+#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */ -+ -+/* GPIO Control Register bit field definitions */ -+#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -+#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */ -+#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */ -+#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ -+#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ -+#define AR531X_NUM_GPIO 8 -+ -+ -+#endif -+ ---- /dev/null -+++ b/arch/mips/ar231x/ar5312.c -@@ -0,0 +1,579 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. -+ * Copyright (C) 2006 FON Technology, SL. -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> -+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com> -+ */ -+ -+/* -+ * Platform devices for Atheros SoCs -+ */ -+ -+#include <generated/autoconf.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/string.h> -+#include <linux/mtd/physmap.h> -+#include <linux/platform_device.h> -+#include <linux/kernel.h> -+#include <linux/reboot.h> -+#include <linux/leds.h> -+#include <linux/gpio.h> -+#include <asm/bootinfo.h> -+#include <asm/reboot.h> -+#include <asm/time.h> -+#include <linux/irq.h> -+#include <asm/io.h> -+ -+#include <ar231x_platform.h> -+#include <ar5312_regs.h> -+#include <ar231x.h> -+#include "devices.h" -+#include "ar5312.h" -+ -+static void -+ar5312_misc_irq_dispatch(void) -+{ -+ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR); -+ -+ if (ar231x_misc_intrs & AR531X_ISR_TIMER) { -+ do_IRQ(AR531X_MISC_IRQ_TIMER); -+ (void)ar231x_read_reg(AR531X_TIMER); -+ } else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC) -+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC); -+ else if ((ar231x_misc_intrs & AR531X_ISR_UART0)) -+ do_IRQ(AR531X_MISC_IRQ_UART0); -+ else if (ar231x_misc_intrs & AR531X_ISR_WD) -+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG); -+ else -+ do_IRQ(AR531X_MISC_IRQ_NONE); -+} -+ -+static asmlinkage void -+ar5312_irq_dispatch(void) -+{ -+ int pending = read_c0_status() & read_c0_cause(); -+ -+ if (pending & CAUSEF_IP2) -+ do_IRQ(AR5312_IRQ_WLAN0_INTRS); -+ else if (pending & CAUSEF_IP3) -+ do_IRQ(AR5312_IRQ_ENET0_INTRS); -+ else if (pending & CAUSEF_IP4) -+ do_IRQ(AR5312_IRQ_ENET1_INTRS); -+ else if (pending & CAUSEF_IP5) -+ do_IRQ(AR5312_IRQ_WLAN1_INTRS); -+ else if (pending & CAUSEF_IP6) -+ ar5312_misc_irq_dispatch(); -+ else if (pending & CAUSEF_IP7) -+ do_IRQ(AR531X_IRQ_CPU_CLOCK); -+} -+ -+ -+/* Enable the specified AR531X_MISC_IRQ interrupt */ -+static void -+ar5312_misc_intr_enable(struct irq_data *d) -+{ -+ unsigned int imr; -+ -+ imr = ar231x_read_reg(AR531X_IMR); -+ imr |= (1 << (d->irq - AR531X_MISC_IRQ_BASE - 1)); -+ ar231x_write_reg(AR531X_IMR, imr); -+} -+ -+/* Disable the specified AR531X_MISC_IRQ interrupt */ -+static void -+ar5312_misc_intr_disable(struct irq_data *d) -+{ -+ unsigned int imr; -+ -+ imr = ar231x_read_reg(AR531X_IMR); -+ imr &= ~(1 << (d->irq - AR531X_MISC_IRQ_BASE - 1)); -+ ar231x_write_reg(AR531X_IMR, imr); -+ ar231x_read_reg(AR531X_IMR); /* flush write buffer */ -+} -+ -+static struct irq_chip ar5312_misc_intr_controller = { -+ .irq_mask = ar5312_misc_intr_disable, -+ .irq_unmask = ar5312_misc_intr_enable, -+}; -+ -+ -+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id) -+{ -+ u32 proc1 = ar231x_read_reg(AR531X_PROC1); -+ u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */ -+ u32 dma1 = ar231x_read_reg(AR531X_DMA1); -+ u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR); /* clears error state */ -+ -+ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", -+ procAddr, proc1, dmaAddr, dma1); -+ -+ machine_restart("AHB error"); /* Catastrophic failure */ -+ return IRQ_HANDLED; -+} -+ -+ -+static struct irqaction ar5312_ahb_proc_interrupt = { -+ .handler = ar5312_ahb_proc_handler, -+ .name = "ar5312_ahb_proc_interrupt", -+}; -+ -+ -+static struct irqaction cascade = { -+ .handler = no_action, -+ .name = "cascade", -+}; -+ -+void __init ar5312_irq_init(void) -+{ -+ int i; -+ -+ if (!is_5312()) -+ return; -+ -+ ar231x_irq_dispatch = ar5312_irq_dispatch; -+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) { -+ int irq = AR531X_MISC_IRQ_BASE + i; -+ irq_set_chip_and_handler(irq, &ar5312_misc_intr_controller, -+ handle_level_irq); -+ } -+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt); -+ setup_irq(AR5312_IRQ_MISC_INTRS, &cascade); -+} -+ -+static u32 -+ar5312_gpio_set_output(u32 mask, u32 val) -+{ -+ u32 reg; -+ -+ reg = ar231x_read_reg(AR531X_GPIO_CR); -+ reg |= mask; -+ reg &= ~val; -+ ar231x_write_reg(AR531X_GPIO_CR, reg); -+ return reg; -+} -+ -+static u32 -+ar5312_gpio_get(u32 valid_mask) -+{ -+ u32 reg; -+ reg = ar231x_read_reg(AR531X_GPIO_DI); -+ reg &= valid_mask; -+ return reg; -+} -+ -+static u32 -+ar5312_gpio_set(u32 mask, u32 value) -+{ -+ u32 reg; -+ reg = ar231x_read_reg(AR531X_GPIO_DO); -+ reg &= ~mask; -+ reg |= value; -+ ar231x_write_reg(AR531X_GPIO_DO, reg); -+ return reg; -+} -+ -+/* -+ * gpiolib implementations. Original mask based methods preserved -+ */ -+static int -+ar5312_gpio_get_value(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct ar231x_gpio_chip *gpch = -+ container_of(chip, struct ar231x_gpio_chip, chip); -+ u32 mask = 1 << gpio; -+ u32 rett; -+ if (!(gpch->valid_mask & mask)) -+ return 0; -+ rett = ar5312_gpio_get(gpch->valid_mask); -+ return !!(rett & mask); -+} -+ -+static void -+ar5312_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value) -+{ -+ struct ar231x_gpio_chip *gpch = -+ container_of(chip, struct ar231x_gpio_chip, chip); -+ u32 mask = 1 << gpio; -+ if (!(gpch->valid_mask & mask)) -+ return; -+ ar5312_gpio_set(mask, (!!value) * mask); -+} -+ -+static int -+ar5312_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct ar231x_gpio_chip *gpch = -+ container_of(chip, struct ar231x_gpio_chip, chip); -+ u32 mask = 1 << gpio; -+ if (!(gpch->valid_mask & mask)) -+ return -ENXIO; -+ ar5312_gpio_set_output(mask, 0); -+ return 0; -+} -+static int -+ar5312_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value) -+{ -+ struct ar231x_gpio_chip *gpch = -+ container_of(chip, struct ar231x_gpio_chip, chip); -+ u32 mask = 1 << gpio; -+ if (!(gpch->valid_mask & mask)) -+ return -ENXIO; -+ ar5312_gpio_set_output(mask, mask); -+ ar5312_gpio_set(mask, (!!value) * mask); -+ return 0; -+} -+ -+static struct ar231x_gpio_chip ar5312_gpio_chip = { -+ .valid_mask = (1 << 22) - 1, -+ .chip = { -+ .label = "ar5312-gpio", -+ .direction_input = ar5312_gpio_direction_input, -+ .direction_output = ar5312_gpio_direction_output, -+ .set = ar5312_gpio_set_value, -+ .get = ar5312_gpio_get_value, -+ .base = 0, -+ .ngpio = AR531X_GPIO_IRQ_COUNT, // 22 -+ } -+}; -+ -+// end of gpiolib -+ -+static struct physmap_flash_data ar5312_flash_data = { -+ .width = 2, -+}; -+ -+static struct resource ar5312_flash_resource = { -+ .start = AR531X_FLASH, -+ .end = AR531X_FLASH + 0x800000 - 1, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct ar231x_eth ar5312_eth0_data = { -+ .reset_base = AR531X_RESET, -+ .reset_mac = AR531X_RESET_ENET0, -+ .reset_phy = AR531X_RESET_EPHY0, -+ .phy_base = KSEG1ADDR(AR531X_ENET0), -+ .config = &ar231x_board, -+}; -+ -+static struct ar231x_eth ar5312_eth1_data = { -+ .reset_base = AR531X_RESET, -+ .reset_mac = AR531X_RESET_ENET1, -+ .reset_phy = AR531X_RESET_EPHY1, -+ .phy_base = KSEG1ADDR(AR531X_ENET1), -+ .config = &ar231x_board, -+}; -+ -+static struct platform_device ar5312_physmap_flash = { -+ .name = "physmap-flash", -+ .id = 0, -+ .dev.platform_data = &ar5312_flash_data, -+ .resource = &ar5312_flash_resource, -+ .num_resources = 1, -+}; -+ -+#ifdef CONFIG_LEDS_GPIO -+static struct gpio_led ar5312_leds[] = { -+ { .name = "wlan", .gpio = 0, .active_low = 1, }, -+}; -+ -+static const struct gpio_led_platform_data ar5312_led_data = { -+ .num_leds = ARRAY_SIZE(ar5312_leds), -+ .leds = (void *) ar5312_leds, -+}; -+ -+static struct platform_device ar5312_gpio_leds = { -+ .name = "leds-gpio", -+ .id = -1, -+ .dev.platform_data = (void *) &ar5312_led_data, -+}; -+#endif -+ -+/* -+ * NB: This mapping size is larger than the actual flash size, -+ * but this shouldn't be a problem here, because the flash -+ * will simply be mapped multiple times. -+ */ -+static char __init *ar5312_flash_limit(void) -+{ -+ u32 ctl; -+ /* -+ * Configure flash bank 0. -+ * Assume 8M window size. Flash will be aliased if it's smaller -+ */ -+ ctl = FLASHCTL_E | -+ FLASHCTL_AC_8M | -+ FLASHCTL_RBLE | -+ (0x01 << FLASHCTL_IDCY_S) | -+ (0x07 << FLASHCTL_WST1_S) | -+ (0x07 << FLASHCTL_WST2_S) | -+ (ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW); -+ -+ ar231x_write_reg(AR531X_FLASHCTL0, ctl); -+ -+ /* Disable other flash banks */ -+ ar231x_write_reg(AR531X_FLASHCTL1, -+ ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC)); -+ -+ ar231x_write_reg(AR531X_FLASHCTL2, -+ ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC)); -+ -+ return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000); -+} -+ -+int __init ar5312_init_devices(void) -+{ -+ struct ar231x_boarddata *config; -+ u32 fctl = 0; -+ u8 *c; -+ -+ if (!is_5312()) -+ return 0; -+ -+ /* Locate board/radio config data */ -+ ar231x_find_config(ar5312_flash_limit()); -+ config = ar231x_board.config; -+ -+ /* AR2313 has CPU minor rev. 10 */ -+ if ((current_cpu_data.processor_id & 0xff) == 0x0a) -+ ar231x_devtype = DEV_TYPE_AR2313; -+ -+ /* AR2312 shares the same Silicon ID as AR5312 */ -+ else if (config->flags & BD_ISCASPER) -+ ar231x_devtype = DEV_TYPE_AR2312; -+ -+ /* Everything else is probably AR5312 or compatible */ -+ else -+ ar231x_devtype = DEV_TYPE_AR5312; -+ -+ /* fixup flash width */ -+ fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW; -+ switch (fctl) { -+ case FLASHCTL_MWx16: -+ ar5312_flash_data.width = 2; -+ break; -+ case FLASHCTL_MWx8: -+ default: -+ ar5312_flash_data.width = 1; -+ break; -+ } -+ -+ platform_device_register(&ar5312_physmap_flash); -+ -+#ifdef CONFIG_LEDS_GPIO -+ ar5312_leds[0].gpio = config->sysLedGpio; -+ platform_device_register(&ar5312_gpio_leds); -+#endif -+ -+ /* Fix up MAC addresses if necessary */ -+ if (!memcmp(config->enet0_mac, "\xff\xff\xff\xff\xff\xff", 6)) -+ memcpy(config->enet0_mac, config->enet1_mac, 6); -+ -+ /* If ENET0 and ENET1 have the same mac address, -+ * increment the one from ENET1 */ -+ if (memcmp(config->enet0_mac, config->enet1_mac, 6) == 0) { -+ c = config->enet1_mac + 5; -+ while ((c >= config->enet1_mac) && !(++(*c))) -+ c--; -+ } -+ -+ switch(ar231x_devtype) { -+ case DEV_TYPE_AR5312: -+ ar5312_eth0_data.macaddr = config->enet0_mac; -+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0), -+ AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data); -+ -+ ar5312_eth1_data.macaddr = config->enet1_mac; -+ ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1), -+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data); -+ -+ if (!ar231x_board.radio) -+ return 0; -+ -+ if (!(config->flags & BD_WLAN0)) -+ break; -+ -+ ar231x_add_wmac(0, AR531X_WLAN0, AR5312_IRQ_WLAN0_INTRS); -+ break; -+ /* -+ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC -+ * of ENET1. Atheros calls it 'twisted' for a reason :) -+ */ -+ case DEV_TYPE_AR2312: -+ case DEV_TYPE_AR2313: -+ ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base; -+ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy; -+ ar5312_eth1_data.macaddr = config->enet0_mac; -+ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1), -+ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data); -+ -+ if (!ar231x_board.radio) -+ return 0; -+ break; -+ default: -+ break; -+ } -+ -+ if (config->flags & BD_WLAN1) -+ ar231x_add_wmac(1, AR531X_WLAN1, AR5312_IRQ_WLAN1_INTRS); -+ -+ return 0; -+} -+ -+ -+static void ar5312_restart(char *command) -+{ -+ /* reset the system */ -+ local_irq_disable(); -+ while(1) { -+ ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM); -+ } -+} -+ -+ -+/* -+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register -+ * to determine the predevisor value. -+ */ -+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 }; -+ -+ -+static int __init -+ar5312_cpu_frequency(void) -+{ -+ unsigned int result; -+ unsigned int predivide_mask, predivide_shift; -+ unsigned int multiplier_mask, multiplier_shift; -+ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier; -+ unsigned int doubler_mask; -+ u16 devid; -+ -+ /* Trust the bootrom's idea of cpu frequency. */ -+ if ((result = ar231x_read_reg(AR5312_SCRATCH))) -+ return result; -+ -+ devid = ar231x_read_reg(AR531X_REV); -+ devid &= AR531X_REV_MAJ; -+ devid >>= AR531X_REV_MAJ_S; -+ if (devid == AR531X_REV_MAJ_AR2313) { -+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK; -+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT; -+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK; -+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT; -+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK; -+ } else { /* AR5312 and AR2312 */ -+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK; -+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT; -+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK; -+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT; -+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK; -+ } -+ -+ /* -+ * Clocking is derived from a fixed 40MHz input clock. -+ * -+ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier) -+ * sysFreq = cpuFreq / 4 (used for APB clock, serial, -+ * flash, Timer, Watchdog Timer) -+ * -+ * cntFreq = cpuFreq / 2 (use for CPU count/compare) -+ * -+ * So, for example, with a PLL multiplier of 5, we have -+ * -+ * cpuFreq = 200MHz -+ * sysFreq = 50MHz -+ * cntFreq = 100MHz -+ * -+ * We compute the CPU frequency, based on PLL settings. -+ */ -+ -+ clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1); -+ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift; -+ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect]; -+ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift; -+ -+ if (clockCtl1 & doubler_mask) { -+ multiplier = multiplier << 1; -+ } -+ return (40000000 / preDivisor) * multiplier; -+} -+ -+static inline int -+ar5312_sys_frequency(void) -+{ -+ return ar5312_cpu_frequency() / 4; -+} -+ -+void __init -+ar5312_time_init(void) -+{ -+ if (!is_5312()) -+ return; -+ -+ mips_hpt_frequency = ar5312_cpu_frequency() / 2; -+} -+ -+int __init -+ar5312_gpio_init(void) -+{ -+ int ret; -+ struct ar231x_gpio_chip *gpch; -+ gpch = &ar5312_gpio_chip; -+ ret = gpiochip_add(&gpch->chip); -+ if (ret) { -+ printk(KERN_ERR "%s: failed to add gpiochip\n", -+ gpch->chip.label); -+ return ret; -+ } -+ printk(KERN_INFO "%s: registered %d GPIOs\n", -+ gpch->chip.label, gpch->chip.ngpio); -+ return ret; -+} -+ -+void __init -+ar5312_prom_init(void) -+{ -+ u32 memsize, memcfg, bank0AC, bank1AC; -+ u32 devid; -+ -+ if (!is_5312()) -+ return; -+ -+ /* Detect memory size */ -+ memcfg = ar231x_read_reg(AR531X_MEM_CFG1); -+ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S; -+ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S; -+ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0) -+ + (bank1AC ? (1 << (bank1AC+1)) : 0); -+ memsize <<= 20; -+ add_memory_region(0, memsize, BOOT_MEM_RAM); -+ -+ devid = ar231x_read_reg(AR531X_REV); -+ devid >>= AR531X_REV_WMAC_MIN_S; -+ devid &= AR531X_REV_CHIP; -+ ar231x_board.devid = (u16) devid; -+ ar5312_gpio_init(); -+} -+ -+void __init -+ar5312_plat_setup(void) -+{ -+ if (!is_5312()) -+ return; -+ -+ /* Clear any lingering AHB errors */ -+ ar231x_read_reg(AR531X_PROCADDR); -+ ar231x_read_reg(AR531X_DMAADDR); -+ ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION); -+ -+ _machine_restart = ar5312_restart; -+ ar231x_serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency()); -+} -+ ---- /dev/null -+++ b/arch/mips/ar231x/ar2315.c -@@ -0,0 +1,692 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. -+ * Copyright (C) 2006 FON Technology, SL. -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> -+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com> -+ */ -+ -+/* -+ * Platform devices for Atheros SoCs -+ */ -+ -+#include <generated/autoconf.h> -+#include <linux/init.h> -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/string.h> -+#include <linux/platform_device.h> -+#include <linux/kernel.h> -+#include <linux/reboot.h> -+#include <linux/delay.h> -+#include <linux/leds.h> -+#include <linux/gpio.h> -+#include <asm/bootinfo.h> -+#include <asm/reboot.h> -+#include <asm/time.h> -+#include <linux/irq.h> -+#include <asm/io.h> -+ -+#include <ar231x_platform.h> -+#include <ar2315_regs.h> -+#include <ar231x.h> -+#include "devices.h" -+#include "ar2315.h" -+ -+static u32 gpiointmask = 0, gpiointval = 0; -+ -+static inline void ar2315_gpio_irq(void) -+{ -+ u32 pend; -+ int bit = -1; -+ -+ /* only do one gpio interrupt at a time */ -+ pend = (ar231x_read_reg(AR2315_GPIO_DI) ^ gpiointval) & gpiointmask; -+ -+ if (pend) { -+ bit = fls(pend) - 1; -+ pend &= ~(1 << bit); -+ gpiointval ^= (1 << bit); -+ } -+ -+ if (!pend) -+ ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO); -+ -+ /* Enable interrupt with edge detection */ -+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(bit)) != AR2315_GPIO_CR_I(bit)) -+ return; -+ -+ if (bit >= 0) -+ do_IRQ(AR531X_GPIO_IRQ_BASE + bit); -+} -+ -+ -+/* -+ * Called when an interrupt is received, this function -+ * determines exactly which interrupt it was, and it -+ * invokes the appropriate handler. -+ * -+ * Implicitly, we also define interrupt priority by -+ * choosing which to dispatch first. -+ */ -+static asmlinkage void -+ar2315_irq_dispatch(void) -+{ -+ int pending = read_c0_status() & read_c0_cause(); -+ -+ if (pending & CAUSEF_IP3) -+ do_IRQ(AR2315_IRQ_WLAN0_INTRS); -+ else if (pending & CAUSEF_IP4) -+ do_IRQ(AR2315_IRQ_ENET0_INTRS); -+ else if (pending & CAUSEF_IP2) { -+ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR); -+ -+ if (misc_intr & AR2315_ISR_SPI) -+ do_IRQ(AR531X_MISC_IRQ_SPI); -+ else if (misc_intr & AR2315_ISR_TIMER) -+ do_IRQ(AR531X_MISC_IRQ_TIMER); -+ else if (misc_intr & AR2315_ISR_AHB) -+ do_IRQ(AR531X_MISC_IRQ_AHB_PROC); -+ else if (misc_intr & AR2315_ISR_GPIO) -+ ar2315_gpio_irq(); -+ else if (misc_intr & AR2315_ISR_UART0) -+ do_IRQ(AR531X_MISC_IRQ_UART0); -+ else if (misc_intr & AR2315_ISR_WD) -+ do_IRQ(AR531X_MISC_IRQ_WATCHDOG); -+ else -+ do_IRQ(AR531X_MISC_IRQ_NONE); -+ } else if (pending & CAUSEF_IP7) -+ do_IRQ(AR531X_IRQ_CPU_CLOCK); -+} -+ -+static void ar2315_set_gpiointmask(int gpio, int level) -+{ -+ u32 reg; -+ -+ reg = ar231x_read_reg(AR2315_GPIO_INT); -+ reg &= ~(AR2315_GPIO_INT_M | AR2315_GPIO_INT_LVL_M); -+ reg |= gpio | AR2315_GPIO_INT_LVL(level); -+ ar231x_write_reg(AR2315_GPIO_INT, reg); -+} -+ -+static void ar2315_gpio_intr_enable(struct irq_data *d) -+{ -+ unsigned int gpio = d->irq - AR531X_GPIO_IRQ_BASE; -+ -+ /* Enable interrupt with edge detection */ -+ if ((ar231x_read_reg(AR2315_GPIO_CR) & AR2315_GPIO_CR_M(gpio)) != AR2315_GPIO_CR_I(gpio)) -+ return; -+ -+ gpiointmask |= (1 << gpio); -+ ar2315_set_gpiointmask(gpio, 3); -+} -+ -+static void ar2315_gpio_intr_disable(struct irq_data *d) -+{ -+ unsigned int gpio = d->irq - AR531X_GPIO_IRQ_BASE; -+ -+ /* Disable interrupt */ -+ gpiointmask &= ~(1 << gpio); -+ ar2315_set_gpiointmask(gpio, 0); -+} -+ -+static struct irq_chip ar2315_gpio_intr_controller = { -+ .irq_mask = ar2315_gpio_intr_disable, -+ .irq_unmask = ar2315_gpio_intr_enable, -+}; -+ -+static void -+ar2315_misc_intr_enable(struct irq_data *d) -+{ -+ unsigned int imr; -+ -+ imr = ar231x_read_reg(AR2315_IMR); -+ switch(d->irq) { -+ case AR531X_MISC_IRQ_SPI: -+ imr |= AR2315_ISR_SPI; -+ break; -+ case AR531X_MISC_IRQ_TIMER: -+ imr |= AR2315_ISR_TIMER; -+ break; -+ case AR531X_MISC_IRQ_AHB_PROC: -+ imr |= AR2315_ISR_AHB; -+ break; -+ case AR531X_MISC_IRQ_GPIO: -+ imr |= AR2315_ISR_GPIO; -+ break; -+ case AR531X_MISC_IRQ_UART0: -+ imr |= AR2315_ISR_UART0; -+ break; -+ case AR531X_MISC_IRQ_WATCHDOG: -+ imr |= AR2315_ISR_WD; -+ break; -+ default: -+ break; -+ } -+ ar231x_write_reg(AR2315_IMR, imr); -+} -+ -+static void -+ar2315_misc_intr_disable(struct irq_data *d) -+{ -+ unsigned int imr; -+ -+ imr = ar231x_read_reg(AR2315_IMR); -+ switch(d->irq) { -+ case AR531X_MISC_IRQ_SPI: -+ imr &= ~AR2315_ISR_SPI; -+ break; -+ case AR531X_MISC_IRQ_TIMER: -+ imr &= ~AR2315_ISR_TIMER; -+ break; -+ case AR531X_MISC_IRQ_AHB_PROC: -+ imr &= ~AR2315_ISR_AHB; -+ break; -+ case AR531X_MISC_IRQ_GPIO: -+ imr &= ~AR2315_ISR_GPIO; -+ break; -+ case AR531X_MISC_IRQ_UART0: -+ imr &= ~AR2315_ISR_UART0; -+ break; -+ case AR531X_MISC_IRQ_WATCHDOG: -+ imr &= ~AR2315_ISR_WD; -+ break; -+ default: -+ break; -+ } -+ ar231x_write_reg(AR2315_IMR, imr); -+} -+ -+static struct irq_chip ar2315_misc_intr_controller = { -+ .irq_mask = ar2315_misc_intr_disable, -+ .irq_unmask = ar2315_misc_intr_enable, -+}; -+ -+static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id) -+{ -+ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET); -+ ar231x_read_reg(AR2315_AHB_ERR1); -+ -+ printk(KERN_ERR "AHB fatal error\n"); -+ machine_restart("AHB error"); /* Catastrophic failure */ -+ -+ return IRQ_HANDLED; -+} -+ -+static struct irqaction ar2315_ahb_proc_interrupt = { -+ .handler = ar2315_ahb_proc_handler, -+ .name = "ar2315_ahb_proc_interrupt", -+}; -+ -+static struct irqaction cascade = { -+ .handler = no_action, -+ .name = "cascade", -+}; -+ -+void -+ar2315_irq_init(void) -+{ -+ int i; -+ -+ if (!is_2315()) -+ return; -+ -+ ar231x_irq_dispatch = ar2315_irq_dispatch; -+ gpiointval = ar231x_read_reg(AR2315_GPIO_DI); -+ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) { -+ int irq = AR531X_MISC_IRQ_BASE + i; -+ irq_set_chip_and_handler(irq, &ar2315_misc_intr_controller, -+ handle_level_irq); -+ } -+ for (i = 0; i < AR531X_GPIO_IRQ_COUNT; i++) { -+ int irq = AR531X_GPIO_IRQ_BASE + i; -+ irq_set_chip_and_handler(irq, &ar2315_gpio_intr_controller, -+ handle_level_irq); -+ } -+ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade); -+ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar2315_ahb_proc_interrupt); -+ setup_irq(AR2315_IRQ_MISC_INTRS, &cascade); -+} -+ -+static u32 -+ar2315_gpio_set_output(u32 mask, u32 val) -+{ -+ u32 reg; -+ -+ reg = ar231x_read_reg(AR2315_GPIO_CR); -+ reg &= ~mask; -+ reg |= val; -+ ar231x_write_reg(AR2315_GPIO_CR, reg); -+ return reg; -+} -+ -+static u32 -+ar2315_gpio_get(u32 valid_mask) -+{ -+ u32 reg; -+ reg = ar231x_read_reg(AR2315_GPIO_DI); -+ reg &= valid_mask; -+ return reg; -+} -+ -+static u32 -+ar2315_gpio_set(u32 mask, u32 value) -+{ -+ u32 reg; -+ reg = ar231x_read_reg(AR2315_GPIO_DO); -+ reg &= ~mask; -+ reg |= value; -+ ar231x_write_reg(AR2315_GPIO_DO, reg); -+ return reg; -+} -+ -+/* -+ * gpiolib implementation. Original legacy mask based methods -+ * preserved for now. -+ */ -+static int -+ar2315_gpio_get_value(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct ar231x_gpio_chip *gpch = -+ container_of(chip, struct ar231x_gpio_chip, chip); -+ u32 mask = 1 << gpio; -+ u32 rett; -+ if (!(gpch->valid_mask & mask)) -+ return 0; -+ rett = ar2315_gpio_get(gpch->valid_mask); // legacy code -+ return !!(rett & mask); -+} -+ -+static void -+ar2315_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value) -+{ -+ struct ar231x_gpio_chip *gpch = -+ container_of(chip, struct ar231x_gpio_chip, chip); -+ u32 mask = 1 << gpio; -+ if (!(gpch->valid_mask & mask)) -+ return; -+ ar2315_gpio_set(mask, (!!value) * mask); // legacy -+} -+ -+static int -+ar2315_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) -+{ -+ struct ar231x_gpio_chip *gpch = -+ container_of(chip, struct ar231x_gpio_chip, chip); -+ u32 mask = 1 << gpio; -+ if (!(gpch->valid_mask & mask)) -+ return -ENXIO; -+ ar2315_gpio_set_output(mask, 0); // legacy -+ return 0; -+} -+ -+static int -+ar2315_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value) -+{ -+ struct ar231x_gpio_chip *gpch = -+ container_of(chip, struct ar231x_gpio_chip, chip); -+ u32 mask = 1 << gpio; -+ if (!(gpch->valid_mask & mask)) -+ return -ENXIO; -+ ar2315_gpio_set_output(mask, mask); // both legacy -+ ar2315_gpio_set(mask, (!!value) * mask); -+ return 0; -+} -+ -+static struct ar231x_gpio_chip ar2315_gpio_chip = { -+ .valid_mask = (1 << 22) - 1, -+ .chip = { -+ .label = "ar2315-gpio", -+ .direction_input = ar2315_gpio_direction_input, -+ .direction_output = ar2315_gpio_direction_output, -+ .set = ar2315_gpio_set_value, -+ .get = ar2315_gpio_get_value, -+ .base = 0, -+ .ngpio = AR531X_GPIO_IRQ_COUNT, // 22 -+ } -+}; -+ -+// end of gpiolib -+ -+ -+static struct ar231x_eth ar2315_eth_data = { -+ .reset_base = AR2315_RESET, -+ .reset_mac = AR2315_RESET_ENET0, -+ .reset_phy = AR2315_RESET_EPHY0, -+ .phy_base = KSEG1ADDR(AR2315_ENET0), -+ .config = &ar231x_board, -+}; -+ -+static struct resource ar2315_spiflash_res[] = { -+ { -+ .name = "flash_base", -+ .flags = IORESOURCE_MEM, -+ .start = KSEG1ADDR(AR2315_SPI_READ), -+ .end = KSEG1ADDR(AR2315_SPI_READ) + 0x1000000 - 1, -+ }, -+ { -+ .name = "flash_regs", -+ .flags = IORESOURCE_MEM, -+ .start = 0x11300000, -+ .end = 0x11300012, -+ }, -+}; -+ -+static struct platform_device ar2315_spiflash = { -+ .id = 0, -+ .name = "spiflash", -+ .resource = ar2315_spiflash_res, -+ .num_resources = ARRAY_SIZE(ar2315_spiflash_res) -+}; -+ -+static struct platform_device ar2315_wdt = { -+ .id = 0, -+ .name = "ar2315_wdt", -+}; -+ -+#define SPI_FLASH_CTL 0x00 -+#define SPI_FLASH_OPCODE 0x04 -+#define SPI_FLASH_DATA 0x08 -+ -+static inline u32 -+spiflash_read_reg(int reg) -+{ -+ return ar231x_read_reg(AR2315_SPI + reg); -+} -+ -+static inline void -+spiflash_write_reg(int reg, u32 data) -+{ -+ ar231x_write_reg(AR2315_SPI + reg, data); -+} -+ -+static u32 -+spiflash_wait_status(void) -+{ -+ u32 reg; -+ -+ do { -+ reg = spiflash_read_reg(SPI_FLASH_CTL); -+ } while (reg & SPI_CTL_BUSY); -+ -+ return reg; -+} -+ -+static u8 -+spiflash_probe(void) -+{ -+ u32 reg; -+ -+ reg = spiflash_wait_status(); -+ reg &= ~SPI_CTL_TX_RX_CNT_MASK; -+ reg |= (1 << 4) | 4 | SPI_CTL_START; -+ -+ spiflash_write_reg(SPI_FLASH_OPCODE, 0xab); -+ spiflash_write_reg(SPI_FLASH_CTL, reg); -+ -+ reg = spiflash_wait_status(); -+ reg = spiflash_read_reg(SPI_FLASH_DATA); -+ reg &= 0xff; -+ -+ return (u8) reg; -+} -+ -+ -+#define STM_8MBIT_SIGNATURE 0x13 -+#define STM_16MBIT_SIGNATURE 0x14 -+#define STM_32MBIT_SIGNATURE 0x15 -+#define STM_64MBIT_SIGNATURE 0x16 -+#define STM_128MBIT_SIGNATURE 0x17 -+ -+static u8 __init * -+ar2315_flash_limit(void) -+{ -+ u32 flash_size = 0; -+ -+ /* probe the flash chip size */ -+ switch(spiflash_probe()) { -+ case STM_8MBIT_SIGNATURE: -+ flash_size = 0x00100000; -+ break; -+ case STM_16MBIT_SIGNATURE: -+ flash_size = 0x00200000; -+ break; -+ case STM_32MBIT_SIGNATURE: -+ flash_size = 0x00400000; -+ break; -+ case STM_64MBIT_SIGNATURE: -+ flash_size = 0x00800000; -+ break; -+ case STM_128MBIT_SIGNATURE: -+ flash_size = 0x01000000; -+ break; -+ } -+ -+ ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start + -+ flash_size - 1; -+ return (u8 *) ar2315_spiflash_res[0].end + 1; -+} -+ -+#ifdef CONFIG_LEDS_GPIO -+static struct gpio_led ar2315_leds[6]; -+static struct gpio_led_platform_data ar2315_led_data = { -+ .leds = (void *) ar2315_leds, -+}; -+ -+static struct platform_device ar2315_gpio_leds = { -+ .name = "leds-gpio", -+ .id = -1, -+ .dev = { -+ .platform_data = (void *) &ar2315_led_data, -+ } -+}; -+ -+static void __init -+ar2315_init_gpio_leds(void) -+{ -+ static char led_names[6][6]; -+ int i, led = 0; -+ -+ ar2315_led_data.num_leds = 0; -+ for(i = 1; i < 8; i++) -+ { -+ if((i == AR2315_RESET_GPIO) || -+ (i == ar231x_board.config->resetConfigGpio)) -+ continue; -+ -+ if(i == ar231x_board.config->sysLedGpio) -+ strcpy(led_names[led], "wlan"); -+ else -+ sprintf(led_names[led], "gpio%d", i); -+ -+ ar2315_leds[led].name = led_names[led]; -+ ar2315_leds[led].gpio = i; -+ ar2315_leds[led].active_low = 0; -+ led++; -+ } -+ ar2315_led_data.num_leds = led; -+ platform_device_register(&ar2315_gpio_leds); -+} -+#else -+static inline void ar2315_init_gpio_leds(void) -+{ -+} -+#endif -+ -+int __init -+ar2315_init_devices(void) -+{ -+ if (!is_2315()) -+ return 0; -+ -+ /* Find board configuration */ -+ ar231x_find_config(ar2315_flash_limit()); -+ ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac; -+ -+ ar2315_init_gpio_leds(); -+ platform_device_register(&ar2315_wdt); -+ platform_device_register(&ar2315_spiflash); -+ ar231x_add_ethernet(0, KSEG1ADDR(AR2315_ENET0), AR2315_IRQ_ENET0_INTRS, -+ &ar2315_eth_data); -+ ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS); -+ -+ return 0; -+} -+ -+static void -+ar2315_restart(char *command) -+{ -+ void (*mips_reset_vec)(void) = (void *) 0xbfc00000; -+ -+ local_irq_disable(); -+ -+ /* try reset the system via reset control */ -+ ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM); -+ -+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround. -+ * give it some time to attempt a gpio based hardware reset -+ * (atheros reference design workaround) */ -+ gpio_request_one(AR2315_RESET_GPIO, GPIOF_OUT_INIT_LOW, "Reset"); -+ mdelay(100); -+ -+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic -+ * workaround. Attempt to jump to the mips reset location - -+ * the boot loader itself might be able to recover the system */ -+ mips_reset_vec(); -+} -+ -+ -+/* -+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register -+ * to determine the predevisor value. -+ */ -+static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { 1, 2, 4, 5 }; -+static int __initdata PLLC_DIVIDE_TABLE[5] = { 2, 3, 4, 6, 3 }; -+ -+static unsigned int __init -+ar2315_sys_clk(unsigned int clockCtl) -+{ -+ unsigned int pllcCtrl,cpuDiv; -+ unsigned int pllcOut,refdiv,fdiv,divby2; -+ unsigned int clkDiv; -+ -+ pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL); -+ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S; -+ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv]; -+ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S; -+ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S; -+ divby2 += 1; -+ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv; -+ -+ -+ /* clkm input selected */ -+ switch(clockCtl & CPUCLK_CLK_SEL_M) { -+ case 0: -+ case 1: -+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S]; -+ break; -+ case 2: -+ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S]; -+ break; -+ default: -+ pllcOut = 40000000; -+ clkDiv = 1; -+ break; -+ } -+ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S; -+ cpuDiv = cpuDiv * 2 ?: 1; -+ return (pllcOut/(clkDiv * cpuDiv)); -+} -+ -+static inline unsigned int -+ar2315_cpu_frequency(void) -+{ -+ return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK)); -+} -+ -+static inline unsigned int -+ar2315_apb_frequency(void) -+{ -+ return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK)); -+} -+ -+void __init -+ar2315_time_init(void) -+{ -+ if (!is_2315()) -+ return; -+ -+ mips_hpt_frequency = ar2315_cpu_frequency() / 2; -+} -+ -+int __init -+ar2315_gpio_init(void) -+{ -+ int ret; -+ struct ar231x_gpio_chip *gpch; -+ gpch = &ar2315_gpio_chip; -+ ret = gpiochip_add(&gpch->chip); -+ if (ret) { -+ printk(KERN_ERR "%s: failed to add gpiochip\n", -+ gpch->chip.label); -+ return ret; -+ } -+ printk(KERN_INFO "%s: registered %d GPIOs\n", -+ gpch->chip.label, gpch->chip.ngpio); -+ return ret; -+} -+ -+ -+ -+void __init -+ar2315_prom_init(void) -+{ -+ u32 memsize, memcfg, devid; -+ -+ if (!is_2315()) -+ return; -+ -+ memcfg = ar231x_read_reg(AR2315_MEM_CFG); -+ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S); -+ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S); -+ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S); -+ memsize <<= 3; -+ add_memory_region(0, memsize, BOOT_MEM_RAM); -+ -+ /* Detect the hardware based on the device ID */ -+ devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP; -+ switch(devid) { -+ case 0x90: -+ case 0x91: -+ ar231x_devtype = DEV_TYPE_AR2317; -+ break; -+ default: -+ ar231x_devtype = DEV_TYPE_AR2315; -+ break; -+ } -+ ar2315_gpio_init(); -+ ar231x_board.devid = devid; -+} -+ -+void __init -+ar2315_plat_setup(void) -+{ -+ u32 config; -+ -+ if (!is_2315()) -+ return; -+ -+ /* Clear any lingering AHB errors */ -+ config = read_c0_config(); -+ write_c0_config(config & ~0x3); -+ ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET); -+ ar231x_read_reg(AR2315_AHB_ERR1); -+ ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION); -+ -+ _machine_restart = ar2315_restart; -+ ar231x_serial_setup(KSEG1ADDR(AR2315_UART0), ar2315_apb_frequency()); -+} ---- /dev/null -+++ b/arch/mips/ar231x/ar2315.h -@@ -0,0 +1,37 @@ -+#ifndef __AR2315_H -+#define __AR2315_H -+ -+#ifdef CONFIG_ATHEROS_AR2315 -+ -+extern void ar2315_irq_init(void); -+extern int ar2315_init_devices(void); -+extern void ar2315_prom_init(void); -+extern void ar2315_plat_setup(void); -+extern void ar2315_time_init(void); -+ -+#else -+ -+static inline void ar2315_irq_init(void) -+{ -+} -+ -+static inline int ar2315_init_devices(void) -+{ -+ return 0; -+} -+ -+static inline void ar2315_prom_init(void) -+{ -+} -+ -+static inline void ar2315_plat_setup(void) -+{ -+} -+ -+static inline void ar2315_time_init(void) -+{ -+} -+ -+#endif -+ -+#endif ---- /dev/null -+++ b/arch/mips/ar231x/ar5312.h -@@ -0,0 +1,38 @@ -+#ifndef __AR5312_H -+#define __AR5312_H -+ -+#ifdef CONFIG_ATHEROS_AR5312 -+ -+extern void ar5312_irq_init(void); -+extern int ar5312_init_devices(void); -+extern void ar5312_prom_init(void); -+extern void ar5312_plat_setup(void); -+extern void ar5312_time_init(void); -+extern void ar5312_time_init(void); -+ -+#else -+ -+static inline void ar5312_irq_init(void) -+{ -+} -+ -+static inline int ar5312_init_devices(void) -+{ -+ return 0; -+} -+ -+static inline void ar5312_prom_init(void) -+{ -+} -+ -+static inline void ar5312_plat_setup(void) -+{ -+} -+ -+static inline void ar5312_time_init(void) -+{ -+} -+ -+#endif -+ -+#endif ---- /dev/null -+++ b/arch/mips/include/asm/mach-ar231x/ar231x.h -@@ -0,0 +1,57 @@ -+#ifndef __AR531X_H -+#define __AR531X_H -+ -+#include <linux/types.h> -+#include <linux/io.h> -+ -+#define AR531X_MISC_IRQ_BASE 0x20 -+#define AR531X_GPIO_IRQ_BASE 0x30 -+ -+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */ -+#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0 -+#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */ -+ -+/* Miscellaneous interrupts, which share IP6 */ -+#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0 -+#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1 -+#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2 -+#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3 -+#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4 -+#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5 -+#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6 -+#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7 -+#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8 -+#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9 -+#define AR531X_MISC_IRQ_COUNT 10 -+ -+/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */ -+#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0 -+#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n -+#define AR531X_GPIO_IRQ_COUNT 22 -+ -+static inline u32 -+ar231x_read_reg(u32 reg) -+{ -+ return __raw_readl((u32 *) KSEG1ADDR(reg)); -+} -+ -+static inline void -+ar231x_write_reg(u32 reg, u32 val) -+{ -+ __raw_writel(val, (u32 *) KSEG1ADDR(reg)); -+} -+ -+static inline u32 -+ar231x_mask_reg(u32 reg, u32 mask, u32 val) -+{ -+ u32 ret; -+ -+ ret = ar231x_read_reg(reg); -+ ret &= ~mask; -+ ret |= val; -+ ar231x_write_reg(reg, ret); -+ -+ return ret; -+} -+ -+#endif ---- /dev/null -+++ b/arch/mips/ar231x/devices.h -@@ -0,0 +1,42 @@ -+#ifndef __AR231X_DEVICES_H -+#define __AR231X_DEVICES_H -+#include <linux/gpio.h> -+ -+enum { -+ /* handled by ar5312.c */ -+ DEV_TYPE_AR2312, -+ DEV_TYPE_AR2313, -+ DEV_TYPE_AR5312, -+ -+ /* handled by ar2315.c */ -+ DEV_TYPE_AR2315, -+ DEV_TYPE_AR2316, -+ DEV_TYPE_AR2317, -+ -+ DEV_TYPE_UNKNOWN -+}; -+ -+extern int ar231x_devtype; -+extern struct ar231x_board_config ar231x_board; -+extern asmlinkage void (*ar231x_irq_dispatch)(void); -+ -+extern int ar231x_find_config(u8 *flash_limit); -+extern void ar231x_serial_setup(u32 mapbase, unsigned int uartclk); -+extern int ar231x_add_wmac(int nr, u32 base, int irq); -+extern int ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata); -+ -+static inline bool is_2315(void) -+{ -+ return (current_cpu_data.cputype == CPU_4KEC); -+} -+ -+static inline bool is_5312(void) -+{ -+ return !is_2315(); -+} -+ -+struct ar231x_gpio_chip { -+ u32 valid_mask; -+ struct gpio_chip chip; -+}; -+#endif ---- /dev/null -+++ b/arch/mips/ar231x/devices.c -@@ -0,0 +1,168 @@ -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/serial.h> -+#include <linux/serial_core.h> -+#include <linux/serial_8250.h> -+#include <linux/platform_device.h> -+#include <ar231x_platform.h> -+#include <ar231x.h> -+#include "devices.h" -+#include "ar5312.h" -+#include "ar2315.h" -+ -+struct ar231x_board_config ar231x_board; -+int ar231x_devtype = DEV_TYPE_UNKNOWN; -+ -+static struct resource ar231x_eth0_res[] = { -+ { -+ .name = "eth0_membase", -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .name = "eth0_irq", -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+static struct resource ar231x_eth1_res[] = { -+ { -+ .name = "eth1_membase", -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .name = "eth1_irq", -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+static struct platform_device ar231x_eth[] = { -+ { -+ .id = 0, -+ .name = "ar231x-eth", -+ .resource = ar231x_eth0_res, -+ .num_resources = ARRAY_SIZE(ar231x_eth0_res) -+ }, -+ { -+ .id = 1, -+ .name = "ar231x-eth", -+ .resource = ar231x_eth1_res, -+ .num_resources = ARRAY_SIZE(ar231x_eth1_res) -+ } -+}; -+ -+static struct resource ar231x_wmac0_res[] = { -+ { -+ .name = "wmac0_membase", -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .name = "wmac0_irq", -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+static struct resource ar231x_wmac1_res[] = { -+ { -+ .name = "wmac1_membase", -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .name = "wmac1_irq", -+ .flags = IORESOURCE_IRQ, -+ } -+}; -+ -+ -+static struct platform_device ar231x_wmac[] = { -+ { -+ .id = 0, -+ .name = "ar231x-wmac", -+ .resource = ar231x_wmac0_res, -+ .num_resources = ARRAY_SIZE(ar231x_wmac0_res), -+ .dev.platform_data = &ar231x_board, -+ }, -+ { -+ .id = 1, -+ .name = "ar231x-wmac", -+ .resource = ar231x_wmac1_res, -+ .num_resources = ARRAY_SIZE(ar231x_wmac1_res), -+ .dev.platform_data = &ar231x_board, -+ }, -+}; -+ -+static const char *devtype_strings[] = { -+ [DEV_TYPE_AR5312] = "Atheros AR5312", -+ [DEV_TYPE_AR2312] = "Atheros AR2312", -+ [DEV_TYPE_AR2313] = "Atheros AR2313", -+ [DEV_TYPE_AR2315] = "Atheros AR2315", -+ [DEV_TYPE_AR2316] = "Atheros AR2316", -+ [DEV_TYPE_AR2317] = "Atheros AR2317", -+ [DEV_TYPE_UNKNOWN] = "Atheros (unknown)", -+}; -+ -+const char *get_system_type(void) -+{ -+ if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) || -+ !devtype_strings[ar231x_devtype]) -+ return devtype_strings[DEV_TYPE_UNKNOWN]; -+ return devtype_strings[ar231x_devtype]; -+} -+ -+ -+int __init -+ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata) -+{ -+ struct resource *res; -+ -+ ar231x_eth[nr].dev.platform_data = pdata; -+ res = &ar231x_eth[nr].resource[0]; -+ res->start = base; -+ res->end = base + 0x2000 - 1; -+ res++; -+ res->start = irq; -+ res->end = irq; -+ return platform_device_register(&ar231x_eth[nr]); -+} -+ -+void __init -+ar231x_serial_setup(u32 mapbase, unsigned int uartclk) -+{ -+ struct uart_port s; -+ -+ memset(&s, 0, sizeof(s)); -+ -+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; -+ s.iotype = UPIO_MEM; -+ s.irq = AR531X_MISC_IRQ_UART0; -+ s.regshift = 2; -+ s.mapbase = mapbase; -+ s.uartclk = uartclk; -+ s.membase = (void __iomem *)s.mapbase; -+ -+ early_serial_setup(&s); -+} -+ -+int __init -+ar231x_add_wmac(int nr, u32 base, int irq) -+{ -+ struct resource *res; -+ -+ ar231x_wmac[nr].dev.platform_data = &ar231x_board; -+ res = &ar231x_wmac[nr].resource[0]; -+ res->start = base; -+ res->end = base + 0x10000 - 1; -+ res++; -+ res->start = irq; -+ res->end = irq; -+ return platform_device_register(&ar231x_wmac[nr]); -+} -+ -+static int __init ar231x_register_devices(void) -+{ -+ ar5312_init_devices(); -+ ar2315_init_devices(); -+ -+ return 0; -+} -+ -+device_initcall(ar231x_register_devices); diff --git a/target/linux/atheros/patches-3.8/101-early-printk-support.patch b/target/linux/atheros/patches-3.8/101-early-printk-support.patch deleted file mode 100644 index 7b0b2ec4de..0000000000 --- a/target/linux/atheros/patches-3.8/101-early-printk-support.patch +++ /dev/null @@ -1,68 +0,0 @@ ---- /dev/null -+++ b/arch/mips/ar231x/early_printk.c -@@ -0,0 +1,44 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> -+ */ -+ -+#include <linux/mm.h> -+#include <linux/io.h> -+#include <linux/serial_reg.h> -+#include <asm/addrspace.h> -+ -+#include <asm/mach-ar231x/ar2315_regs.h> -+#include <asm/mach-ar231x/ar5312_regs.h> -+#include "devices.h" -+ -+static inline void prom_uart_wr(void __iomem *base, unsigned reg, -+ unsigned char ch) -+{ -+ __raw_writeb(ch, base + 4 * reg); -+} -+ -+static inline unsigned char prom_uart_rr(void __iomem *base, unsigned reg) -+{ -+ return __raw_readb(base + 4 * reg); -+} -+ -+void prom_putchar(unsigned char ch) -+{ -+ static void __iomem *base; -+ -+ if (unlikely(base == NULL)) { -+ if (is_2315()) -+ base = (void __iomem *)(KSEG1ADDR(AR2315_UART0)); -+ else -+ base = (void __iomem *)(KSEG1ADDR(AR531X_UART0)); -+ } -+ -+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0); -+ prom_uart_wr(base, UART_TX, ch); -+ while ((prom_uart_rr(base, UART_LSR) & UART_LSR_THRE) == 0); -+} -+ ---- a/arch/mips/ar231x/Makefile -+++ b/arch/mips/ar231x/Makefile -@@ -9,5 +9,8 @@ - # - - obj-y += board.o prom.o devices.o -+ -+obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -+ - obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o - obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -145,6 +145,7 @@ config ATHEROS_AR231X - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_32BIT_KERNEL - select ARCH_REQUIRE_GPIOLIB -+ select SYS_HAS_EARLY_PRINTK - help - Support for AR231x and AR531x based boards - diff --git a/target/linux/atheros/patches-3.8/105-ar2315_pci.patch b/target/linux/atheros/patches-3.8/105-ar2315_pci.patch deleted file mode 100644 index 7c72a8e417..0000000000 --- a/target/linux/atheros/patches-3.8/105-ar2315_pci.patch +++ /dev/null @@ -1,294 +0,0 @@ ---- a/arch/mips/ar231x/Makefile -+++ b/arch/mips/ar231x/Makefile -@@ -14,3 +14,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin - - obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o - obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o -+obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o ---- /dev/null -+++ b/arch/mips/ar231x/pci.c -@@ -0,0 +1,230 @@ -+/* -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ */ -+ -+#include <linux/types.h> -+#include <linux/pci.h> -+#include <linux/kernel.h> -+#include <linux/init.h> -+#include <linux/mm.h> -+#include <linux/spinlock.h> -+#include <linux/delay.h> -+#include <linux/irq.h> -+#include <asm/bootinfo.h> -+#include <asm/paccess.h> -+#include <asm/irq_cpu.h> -+#include <asm/io.h> -+#include <ar231x_platform.h> -+#include <ar231x.h> -+#include <ar2315_regs.h> -+#include "devices.h" -+ -+#define AR531X_MEM_BASE 0x80800000UL -+#define AR531X_MEM_SIZE 0x00ffffffUL -+#define AR531X_IO_SIZE 0x00007fffUL -+ -+static unsigned long configspace; -+ -+static int config_access(int devfn, int where, int size, u32 *ptr, bool write) -+{ -+ unsigned long flags; -+ int func = PCI_FUNC(devfn); -+ int dev = PCI_SLOT(devfn); -+ u32 value = 0; -+ int err = 0; -+ u32 addr; -+ -+ if (((dev != 0) && (dev != 3)) || (func > 2)) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ -+ /* Select Configuration access */ -+ local_irq_save(flags); -+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, 0, AR2315_PCIMISC_CFG_SEL); -+ mb(); -+ -+ addr = (u32) configspace + (1 << (13 + dev)) + (func << 8) + where; -+ if (size == 1) -+ addr ^= 0x3; -+ else if (size == 2) -+ addr ^= 0x2; -+ -+ if (write) { -+ value = *ptr; -+ if (size == 1) -+ err = put_dbe(value, (u8 *) addr); -+ else if (size == 2) -+ err = put_dbe(value, (u16 *) addr); -+ else if (size == 4) -+ err = put_dbe(value, (u32 *) addr); -+ } else { -+ if (size == 1) -+ err = get_dbe(value, (u8 *) addr); -+ else if (size == 2) -+ err = get_dbe(value, (u16 *) addr); -+ else if (size == 4) -+ err = get_dbe(value, (u32 *) addr); -+ if (err) -+ *ptr = 0xffffffff; -+ else -+ *ptr = value; -+ } -+ -+ /* Select Memory access */ -+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_CFG_SEL, 0); -+ local_irq_restore(flags); -+ -+ return (err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL); -+} -+ -+static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value) -+{ -+ return config_access(devfn, where, size, value, 0); -+} -+ -+static int ar231x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) -+{ -+ return config_access(devfn, where, size, &value, 1); -+} -+ -+struct pci_ops ar231x_pci_ops = { -+ .read = ar231x_pci_read, -+ .write = ar231x_pci_write, -+}; -+ -+static struct resource ar231x_mem_resource = { -+ .name = "AR531x PCI MEM", -+ .start = AR531X_MEM_BASE, -+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000, -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct resource ar231x_io_resource = { -+ .name = "AR531x PCI I/O", -+ .start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE, -+ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1, -+ .flags = IORESOURCE_IO, -+}; -+ -+struct pci_controller ar231x_pci_controller = { -+ .pci_ops = &ar231x_pci_ops, -+ .mem_resource = &ar231x_mem_resource, -+ .io_resource = &ar231x_io_resource, -+ .mem_offset = 0x00000000UL, -+ .io_offset = 0x00000000UL, -+}; -+ -+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ return AR2315_IRQ_LCBUS_PCI; -+} -+ -+int pcibios_plat_dev_init(struct pci_dev *dev) -+{ -+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5); -+ pci_write_config_word(dev, 0x40, 0); -+ -+ /* Clear any pending Abort or external Interrupts -+ * and enable interrupt processing */ -+ ar231x_mask_reg(AR2315_PCI_INTEN_REG, AR2315_PCI_INT_ENABLE, 0); -+ ar231x_write_reg(AR2315_PCI_INT_STATUS, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT)); -+ ar231x_write_reg(AR2315_PCI_INT_MASK, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT)); -+ ar231x_mask_reg(AR2315_PCI_INTEN_REG, 0, AR2315_PCI_INT_ENABLE); -+ -+ return 0; -+} -+ -+static void -+ar2315_pci_fixup(struct pci_dev *dev) -+{ -+ unsigned int devfn = dev->devfn; -+ -+ if (dev->bus->number != 0) -+ return; -+ -+ /* Only fix up the PCI host settings */ -+ if ((PCI_SLOT(devfn) != 3) || (PCI_FUNC(devfn) != 0)) -+ return; -+ -+ /* Fix up MBARs */ -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, HOST_PCI_MBAR0); -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, HOST_PCI_MBAR1); -+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, HOST_PCI_MBAR2); -+ pci_write_config_dword(dev, PCI_COMMAND, -+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL | -+ PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | -+ PCI_COMMAND_FAST_BACK); -+} -+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar2315_pci_fixup); -+ -+static int __init -+ar2315_pci_init(void) -+{ -+ u32 reg; -+ -+ if (ar231x_devtype != DEV_TYPE_AR2315) -+ return -ENODEV; -+ -+ configspace = (unsigned long) ioremap_nocache(AR2315_PCIEXT, 1*1024*1024); /* Remap PCI config space */ -+ ar231x_pci_controller.io_map_base = -+ (unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE); -+ set_io_port_base(ar231x_pci_controller.io_map_base); /* PCI I/O space */ -+ -+ reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA); -+ msleep(10); -+ -+ reg &= ~AR2315_RESET_PCIDMA; -+ ar231x_write_reg(AR2315_RESET, reg); -+ msleep(10); -+ -+ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0, -+ AR2315_CONFIG_PCIAHB | AR2315_CONFIG_PCIAHB_BRIDGE); -+ -+ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM | -+ (AR2315_PCICLK_IN_FREQ_DIV_6 << AR2315_PCICLK_DIV_S)); -+ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI); -+ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | AR2315_IF_MASK, -+ AR2315_IF_PCI | AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR | -+ (AR2315_IF_PCI_CLK_OUTPUT_CLK << AR2315_IF_PCI_CLK_SHIFT)); -+ -+ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */ -+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE, -+ AR2315_PCIRST_LOW); -+ msleep(100); -+ -+ /* Bring the PCI out of reset */ -+ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE, -+ AR2315_PCIRST_HIGH | AR2315_PCICACHE_DIS | 0x8); -+ -+ ar231x_write_reg(AR2315_PCI_UNCACHE_CFG, -+ 0x1E | /* 1GB uncached */ -+ (1 << 5) | /* Enable uncached */ -+ (0x2 << 30) /* Base: 0x80000000 */ -+ ); -+ ar231x_read_reg(AR2315_PCI_UNCACHE_CFG); -+ -+ msleep(500); -+ -+ /* dirty hack - anyone with a datasheet that knows the memory map ? */ -+ ioport_resource.start = 0x10000000; -+ ioport_resource.end = 0xffffffff; -+ iomem_resource.start = 0x10000000; -+ iomem_resource.end = 0xffffffff; -+ -+ register_pci_controller(&ar231x_pci_controller); -+ -+ return 0; -+} -+ -+arch_initcall(ar2315_pci_init); ---- a/arch/mips/ar231x/Kconfig -+++ b/arch/mips/ar231x/Kconfig -@@ -14,3 +14,10 @@ config ATHEROS_AR2315 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - default y -+ -+config ATHEROS_AR2315_PCI -+ bool "PCI support" -+ depends on ATHEROS_AR2315 -+ select HW_HAS_PCI -+ select PCI -+ default y ---- a/arch/mips/ar231x/ar2315.c -+++ b/arch/mips/ar231x/ar2315.c -@@ -64,6 +64,27 @@ static inline void ar2315_gpio_irq(void) - do_IRQ(AR531X_GPIO_IRQ_BASE + bit); - } - -+#ifdef CONFIG_ATHEROS_AR2315_PCI -+static inline void pci_abort_irq(void) -+{ -+ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_ABORT_INT); -+} -+ -+static inline void pci_ack_irq(void) -+{ -+ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_EXT_INT); -+} -+ -+void ar2315_pci_irq(int irq) -+{ -+ if (ar231x_read_reg(AR2315_PCI_INT_STATUS) == AR2315_PCI_ABORT_INT) -+ pci_abort_irq(); -+ else { -+ do_IRQ(irq); -+ pci_ack_irq(); -+ } -+} -+#endif /* CONFIG_ATHEROS_AR2315_PCI */ - - /* - * Called when an interrupt is received, this function -@@ -82,6 +103,10 @@ ar2315_irq_dispatch(void) - do_IRQ(AR2315_IRQ_WLAN0_INTRS); - else if (pending & CAUSEF_IP4) - do_IRQ(AR2315_IRQ_ENET0_INTRS); -+#ifdef CONFIG_ATHEROS_AR2315_PCI -+ else if (pending & CAUSEF_IP5) -+ ar2315_pci_irq(AR2315_IRQ_LCBUS_PCI); -+#endif - else if (pending & CAUSEF_IP2) { - unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR); - diff --git a/target/linux/atheros/patches-3.8/110-ar2313_ethernet.patch b/target/linux/atheros/patches-3.8/110-ar2313_ethernet.patch deleted file mode 100644 index e8879f41db..0000000000 --- a/target/linux/atheros/patches-3.8/110-ar2313_ethernet.patch +++ /dev/null @@ -1,1619 +0,0 @@ ---- a/drivers/net/ethernet/Kconfig -+++ b/drivers/net/ethernet/Kconfig -@@ -22,6 +22,7 @@ source "drivers/net/ethernet/adaptec/Kco - source "drivers/net/ethernet/aeroflex/Kconfig" - source "drivers/net/ethernet/alteon/Kconfig" - source "drivers/net/ethernet/amd/Kconfig" -+source "drivers/net/ethernet/ar231x/Kconfig" - source "drivers/net/ethernet/apple/Kconfig" - source "drivers/net/ethernet/atheros/Kconfig" - source "drivers/net/ethernet/cadence/Kconfig" ---- a/drivers/net/ethernet/Makefile -+++ b/drivers/net/ethernet/Makefile -@@ -9,6 +9,7 @@ obj-$(CONFIG_GRETH) += aeroflex/ - obj-$(CONFIG_NET_VENDOR_ALTEON) += alteon/ - obj-$(CONFIG_NET_VENDOR_AMD) += amd/ - obj-$(CONFIG_NET_VENDOR_APPLE) += apple/ -+obj-$(CONFIG_NET_VENDOR_AR231X) += ar231x/ - obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/ - obj-$(CONFIG_NET_CADENCE) += cadence/ - obj-$(CONFIG_NET_BFIN) += adi/ ---- /dev/null -+++ b/drivers/net/ethernet/ar231x/Kconfig -@@ -0,0 +1,5 @@ -+config NET_VENDOR_AR231X -+ tristate "AR231X Ethernet support" -+ depends on ATHEROS_AR231X -+ help -+ Support for the AR231x/531x ethernet controller ---- /dev/null -+++ b/drivers/net/ethernet/ar231x/Makefile -@@ -0,0 +1 @@ -+obj-$(CONFIG_NET_VENDOR_AR231X) += ar231x.o ---- /dev/null -+++ b/drivers/net/ethernet/ar231x/ar231x.c -@@ -0,0 +1,1278 @@ -+/* -+ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device. -+ * -+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com> -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> -+ * -+ * Thanks to Atheros for providing hardware and documentation -+ * enabling me to write this driver. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * Additional credits: -+ * This code is taken from John Taylor's Sibyte driver and then -+ * modified for the AR2313. -+ */ -+ -+#include <linux/module.h> -+#include <linux/version.h> -+#include <linux/types.h> -+#include <linux/errno.h> -+#include <linux/ioport.h> -+#include <linux/pci.h> -+#include <linux/netdevice.h> -+#include <linux/etherdevice.h> -+#include <linux/interrupt.h> -+#include <linux/hardirq.h> -+#include <linux/skbuff.h> -+#include <linux/init.h> -+#include <linux/delay.h> -+#include <linux/mm.h> -+#include <linux/highmem.h> -+#include <linux/sockios.h> -+#include <linux/pkt_sched.h> -+#include <linux/mii.h> -+#include <linux/phy.h> -+#include <linux/ethtool.h> -+#include <linux/ctype.h> -+#include <linux/platform_device.h> -+ -+#include <net/sock.h> -+#include <net/ip.h> -+ -+#include <asm/io.h> -+#include <asm/irq.h> -+#include <asm/byteorder.h> -+#include <asm/uaccess.h> -+#include <asm/bootinfo.h> -+ -+#define AR2313_MTU 1692 -+#define AR2313_PRIOS 1 -+#define AR2313_QUEUES (2*AR2313_PRIOS) -+#define AR2313_DESCR_ENTRIES 64 -+ -+ -+#ifndef min -+#define min(a,b) (((a)<(b))?(a):(b)) -+#endif -+ -+#ifndef SMP_CACHE_BYTES -+#define SMP_CACHE_BYTES L1_CACHE_BYTES -+#endif -+ -+#define AR2313_MBOX_SET_BIT 0x8 -+ -+#include "ar231x.h" -+ -+/* -+ * New interrupt handler strategy: -+ * -+ * An old interrupt handler worked using the traditional method of -+ * replacing an skbuff with a new one when a packet arrives. However -+ * the rx rings do not need to contain a static number of buffer -+ * descriptors, thus it makes sense to move the memory allocation out -+ * of the main interrupt handler and do it in a bottom half handler -+ * and only allocate new buffers when the number of buffers in the -+ * ring is below a certain threshold. In order to avoid starving the -+ * NIC under heavy load it is however necessary to force allocation -+ * when hitting a minimum threshold. The strategy for alloction is as -+ * follows: -+ * -+ * RX_LOW_BUF_THRES - allocate buffers in the bottom half -+ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate -+ * the buffers in the interrupt handler -+ * RX_RING_THRES - maximum number of buffers in the rx ring -+ * -+ * One advantagous side effect of this allocation approach is that the -+ * entire rx processing can be done without holding any spin lock -+ * since the rx rings and registers are totally independent of the tx -+ * ring and its registers. This of course includes the kmalloc's of -+ * new skb's. Thus start_xmit can run in parallel with rx processing -+ * and the memory allocation on SMP systems. -+ * -+ * Note that running the skb reallocation in a bottom half opens up -+ * another can of races which needs to be handled properly. In -+ * particular it can happen that the interrupt handler tries to run -+ * the reallocation while the bottom half is either running on another -+ * CPU or was interrupted on the same CPU. To get around this the -+ * driver uses bitops to prevent the reallocation routines from being -+ * reentered. -+ * -+ * TX handling can also be done without holding any spin lock, wheee -+ * this is fun! since tx_csm is only written to by the interrupt -+ * handler. -+ */ -+ -+/* -+ * Threshold values for RX buffer allocation - the low water marks for -+ * when to start refilling the rings are set to 75% of the ring -+ * sizes. It seems to make sense to refill the rings entirely from the -+ * intrrupt handler once it gets below the panic threshold, that way -+ * we don't risk that the refilling is moved to another CPU when the -+ * one running the interrupt handler just got the slab code hot in its -+ * cache. -+ */ -+#define RX_RING_SIZE AR2313_DESCR_ENTRIES -+#define RX_PANIC_THRES (RX_RING_SIZE/4) -+#define RX_LOW_THRES ((3*RX_RING_SIZE)/4) -+#define CRC_LEN 4 -+#define RX_OFFSET 2 -+ -+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) -+#define VLAN_HDR 4 -+#else -+#define VLAN_HDR 0 -+#endif -+ -+#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET) -+ -+#ifdef MODULE -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Sameer Dekate <sdekate@arubanetworks.com>, Imre Kaloz <kaloz@openwrt.org>, Felix Fietkau <nbd@openwrt.org>"); -+MODULE_DESCRIPTION("AR231x Ethernet driver"); -+#endif -+ -+#define virt_to_phys(x) ((u32)(x) & 0x1fffffff) -+ -+// prototypes -+static void ar231x_halt(struct net_device *dev); -+static void rx_tasklet_func(unsigned long data); -+static void rx_tasklet_cleanup(struct net_device *dev); -+static void ar231x_multicast_list(struct net_device *dev); -+static void ar231x_tx_timeout(struct net_device *dev); -+ -+static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum); -+static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value); -+static int ar231x_mdiobus_reset(struct mii_bus *bus); -+static int ar231x_mdiobus_probe (struct net_device *dev); -+static void ar231x_adjust_link(struct net_device *dev); -+ -+#ifndef ERR -+#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args) -+#endif -+ -+#ifdef CONFIG_NET_POLL_CONTROLLER -+static void -+ar231x_netpoll(struct net_device *dev) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ ar231x_interrupt(dev->irq, dev); -+ local_irq_restore(flags); -+} -+#endif -+ -+static const struct net_device_ops ar231x_ops = { -+ .ndo_open = ar231x_open, -+ .ndo_stop = ar231x_close, -+ .ndo_start_xmit = ar231x_start_xmit, -+ .ndo_set_rx_mode = ar231x_multicast_list, -+ .ndo_do_ioctl = ar231x_ioctl, -+ .ndo_change_mtu = eth_change_mtu, -+ .ndo_validate_addr = eth_validate_addr, -+ .ndo_set_mac_address = eth_mac_addr, -+ .ndo_tx_timeout = ar231x_tx_timeout, -+#ifdef CONFIG_NET_POLL_CONTROLLER -+ .ndo_poll_controller = ar231x_netpoll, -+#endif -+}; -+ -+int ar231x_probe(struct platform_device *pdev) -+{ -+ struct net_device *dev; -+ struct ar231x_private *sp; -+ struct resource *res; -+ unsigned long ar_eth_base; -+ char buf[64]; -+ -+ dev = alloc_etherdev(sizeof(struct ar231x_private)); -+ -+ if (dev == NULL) { -+ printk(KERN_ERR -+ "ar231x: Unable to allocate net_device structure!\n"); -+ return -ENOMEM; -+ } -+ -+ platform_set_drvdata(pdev, dev); -+ -+ sp = netdev_priv(dev); -+ sp->dev = dev; -+ sp->cfg = pdev->dev.platform_data; -+ -+ sprintf(buf, "eth%d_membase", pdev->id); -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf); -+ if (!res) -+ return -ENODEV; -+ -+ sp->link = 0; -+ ar_eth_base = res->start; -+ -+ sprintf(buf, "eth%d_irq", pdev->id); -+ dev->irq = platform_get_irq_byname(pdev, buf); -+ -+ spin_lock_init(&sp->lock); -+ -+ dev->features |= NETIF_F_HIGHDMA; -+ dev->netdev_ops = &ar231x_ops; -+ -+ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev); -+ tasklet_disable(&sp->rx_tasklet); -+ -+ sp->eth_regs = -+ ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs)); -+ if (!sp->eth_regs) { -+ printk("Can't remap eth registers\n"); -+ return (-ENXIO); -+ } -+ -+ /* -+ * When there's only one MAC, PHY regs are typically on ENET0, -+ * even though the MAC might be on ENET1. -+ * Needto remap PHY regs separately in this case -+ */ -+ if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs)) -+ sp->phy_regs = sp->eth_regs; -+ else { -+ sp->phy_regs = -+ ioremap_nocache(virt_to_phys(sp->cfg->phy_base), -+ sizeof(*sp->phy_regs)); -+ if (!sp->phy_regs) { -+ printk("Can't remap phy registers\n"); -+ return (-ENXIO); -+ } -+ } -+ -+ sp->dma_regs = -+ ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000), -+ sizeof(*sp->dma_regs)); -+ dev->base_addr = (unsigned int) sp->dma_regs; -+ if (!sp->dma_regs) { -+ printk("Can't remap DMA registers\n"); -+ return (-ENXIO); -+ } -+ -+ sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4); -+ if (!sp->int_regs) { -+ printk("Can't remap INTERRUPT registers\n"); -+ return (-ENXIO); -+ } -+ -+ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1); -+ sp->name[sizeof(sp->name) - 1] = '\0'; -+ memcpy(dev->dev_addr, sp->cfg->macaddr, 6); -+ -+ if (ar231x_init(dev)) { -+ /* -+ * ar231x_init() calls ar231x_init_cleanup() on error. -+ */ -+ kfree(dev); -+ return -ENODEV; -+ } -+ -+ if (register_netdev(dev)) { -+ printk("%s: register_netdev failed\n", __func__); -+ return -1; -+ } -+ -+ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n", -+ dev->name, sp->name, -+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], -+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq); -+ -+ sp->mii_bus = mdiobus_alloc(); -+ if (sp->mii_bus == NULL) -+ return -1; -+ -+ sp->mii_bus->priv = dev; -+ sp->mii_bus->read = ar231x_mdiobus_read; -+ sp->mii_bus->write = ar231x_mdiobus_write; -+ sp->mii_bus->reset = ar231x_mdiobus_reset; -+ sp->mii_bus->name = "ar231x_eth_mii"; -+ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id); -+ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL); -+ *sp->mii_bus->irq = PHY_POLL; -+ -+ mdiobus_register(sp->mii_bus); -+ -+ if (ar231x_mdiobus_probe(dev) != 0) { -+ printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name); -+ rx_tasklet_cleanup(dev); -+ ar231x_init_cleanup(dev); -+ unregister_netdev(dev); -+ kfree(dev); -+ return -ENODEV; -+ } -+ -+ /* start link poll timer */ -+ ar231x_setup_timer(dev); -+ -+ return 0; -+} -+ -+ -+static void ar231x_multicast_list(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ unsigned int filter; -+ -+ filter = sp->eth_regs->mac_control; -+ -+ if (dev->flags & IFF_PROMISC) -+ filter |= MAC_CONTROL_PR; -+ else -+ filter &= ~MAC_CONTROL_PR; -+ if ((dev->flags & IFF_ALLMULTI) || (netdev_mc_count(dev) > 0)) -+ filter |= MAC_CONTROL_PM; -+ else -+ filter &= ~MAC_CONTROL_PM; -+ -+ sp->eth_regs->mac_control = filter; -+} -+ -+static void rx_tasklet_cleanup(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ -+ /* -+ * Tasklet may be scheduled. Need to get it removed from the list -+ * since we're about to free the struct. -+ */ -+ -+ sp->unloading = 1; -+ tasklet_enable(&sp->rx_tasklet); -+ tasklet_kill(&sp->rx_tasklet); -+} -+ -+static int ar231x_remove(struct platform_device *pdev) -+{ -+ struct net_device *dev = platform_get_drvdata(pdev); -+ struct ar231x_private *sp = netdev_priv(dev); -+ rx_tasklet_cleanup(dev); -+ ar231x_init_cleanup(dev); -+ unregister_netdev(dev); -+ mdiobus_unregister(sp->mii_bus); -+ mdiobus_free(sp->mii_bus); -+ kfree(dev); -+ return 0; -+} -+ -+ -+/* -+ * Restart the AR2313 ethernet controller. -+ */ -+static int ar231x_restart(struct net_device *dev) -+{ -+ /* disable interrupts */ -+ disable_irq(dev->irq); -+ -+ /* stop mac */ -+ ar231x_halt(dev); -+ -+ /* initialize */ -+ ar231x_init(dev); -+ -+ /* enable interrupts */ -+ enable_irq(dev->irq); -+ -+ return 0; -+} -+ -+static struct platform_driver ar231x_driver = { -+ .driver.name = "ar231x-eth", -+ .probe = ar231x_probe, -+ .remove = ar231x_remove, -+}; -+ -+module_platform_driver(ar231x_driver); -+ -+static void ar231x_free_descriptors(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ if (sp->rx_ring != NULL) { -+ kfree((void *) KSEG0ADDR(sp->rx_ring)); -+ sp->rx_ring = NULL; -+ sp->tx_ring = NULL; -+ } -+} -+ -+ -+static int ar231x_allocate_descriptors(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ int size; -+ int j; -+ ar231x_descr_t *space; -+ -+ if (sp->rx_ring != NULL) { -+ printk("%s: already done.\n", __FUNCTION__); -+ return 0; -+ } -+ -+ size = -+ (sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES)); -+ space = kmalloc(size, GFP_KERNEL); -+ if (space == NULL) -+ return 1; -+ -+ /* invalidate caches */ -+ dma_cache_inv((unsigned int) space, size); -+ -+ /* now convert pointer to KSEG1 */ -+ space = (ar231x_descr_t *) KSEG1ADDR(space); -+ -+ memset((void *) space, 0, size); -+ -+ sp->rx_ring = space; -+ space += AR2313_DESCR_ENTRIES; -+ -+ sp->tx_ring = space; -+ space += AR2313_DESCR_ENTRIES; -+ -+ /* Initialize the transmit Descriptors */ -+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { -+ ar231x_descr_t *td = &sp->tx_ring[j]; -+ td->status = 0; -+ td->devcs = DMA_TX1_CHAINED; -+ td->addr = 0; -+ td->descr = -+ virt_to_phys(&sp-> -+ tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]); -+ } -+ -+ return 0; -+} -+ -+ -+/* -+ * Generic cleanup handling data allocated during init. Used when the -+ * module is unloaded or if an error occurs during initialization -+ */ -+static void ar231x_init_cleanup(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ struct sk_buff *skb; -+ int j; -+ -+ ar231x_free_descriptors(dev); -+ -+ if (sp->eth_regs) -+ iounmap((void *) sp->eth_regs); -+ if (sp->dma_regs) -+ iounmap((void *) sp->dma_regs); -+ -+ if (sp->rx_skb) { -+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { -+ skb = sp->rx_skb[j]; -+ if (skb) { -+ sp->rx_skb[j] = NULL; -+ dev_kfree_skb(skb); -+ } -+ } -+ kfree(sp->rx_skb); -+ sp->rx_skb = NULL; -+ } -+ -+ if (sp->tx_skb) { -+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { -+ skb = sp->tx_skb[j]; -+ if (skb) { -+ sp->tx_skb[j] = NULL; -+ dev_kfree_skb(skb); -+ } -+ } -+ kfree(sp->tx_skb); -+ sp->tx_skb = NULL; -+ } -+} -+ -+static int ar231x_setup_timer(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ -+ init_timer(&sp->link_timer); -+ -+ sp->link_timer.function = ar231x_link_timer_fn; -+ sp->link_timer.data = (int) dev; -+ sp->link_timer.expires = jiffies + HZ; -+ -+ add_timer(&sp->link_timer); -+ return 0; -+ -+} -+ -+static void ar231x_link_timer_fn(unsigned long data) -+{ -+ struct net_device *dev = (struct net_device *) data; -+ struct ar231x_private *sp = netdev_priv(dev); -+ -+ // see if the link status changed -+ // This was needed to make sure we set the PHY to the -+ // autonegotiated value of half or full duplex. -+ ar231x_check_link(dev); -+ -+ // Loop faster when we don't have link. -+ // This was needed to speed up the AP bootstrap time. -+ if (sp->link == 0) { -+ mod_timer(&sp->link_timer, jiffies + HZ / 2); -+ } else { -+ mod_timer(&sp->link_timer, jiffies + LINK_TIMER); -+ } -+} -+ -+static void ar231x_check_link(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ u16 phyData; -+ -+ phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR); -+ if (sp->phyData != phyData) { -+ if (phyData & BMSR_LSTATUS) { -+ /* link is present, ready link partner ability to deterine -+ duplexity */ -+ int duplex = 0; -+ u16 reg; -+ -+ sp->link = 1; -+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR); -+ if (reg & BMCR_ANENABLE) { -+ /* auto neg enabled */ -+ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA); -+ duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0; -+ } else { -+ /* no auto neg, just read duplex config */ -+ duplex = (reg & BMCR_FULLDPLX) ? 1 : 0; -+ } -+ -+ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n", -+ dev->name, (duplex) ? "full" : "half"); -+ -+ if (duplex) { -+ /* full duplex */ -+ sp->eth_regs->mac_control = -+ ((sp->eth_regs-> -+ mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO); -+ } else { -+ /* half duplex */ -+ sp->eth_regs->mac_control = -+ ((sp->eth_regs-> -+ mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F); -+ } -+ } else { -+ /* no link */ -+ sp->link = 0; -+ } -+ sp->phyData = phyData; -+ } -+} -+ -+static int ar231x_reset_reg(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ unsigned int ethsal, ethsah; -+ unsigned int flags; -+ -+ *sp->int_regs |= sp->cfg->reset_mac; -+ mdelay(10); -+ *sp->int_regs &= ~sp->cfg->reset_mac; -+ mdelay(10); -+ *sp->int_regs |= sp->cfg->reset_phy; -+ mdelay(10); -+ *sp->int_regs &= ~sp->cfg->reset_phy; -+ mdelay(10); -+ -+ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR); -+ mdelay(10); -+ sp->dma_regs->bus_mode = -+ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE); -+ -+ /* enable interrupts */ -+ sp->dma_regs->intr_ena = (DMA_STATUS_AIS | -+ DMA_STATUS_NIS | -+ DMA_STATUS_RI | -+ DMA_STATUS_TI | DMA_STATUS_FBE); -+ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring); -+ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring); -+ sp->dma_regs->control = -+ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF); -+ -+ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE); -+ sp->eth_regs->vlan_tag = (0x8100); -+ -+ /* Enable Ethernet Interface */ -+ flags = (MAC_CONTROL_TE | /* transmit enable */ -+ MAC_CONTROL_PM | /* pass mcast */ -+ MAC_CONTROL_F | /* full duplex */ -+ MAC_CONTROL_HBD); /* heart beat disabled */ -+ -+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ -+ flags |= MAC_CONTROL_PR; -+ } -+ sp->eth_regs->mac_control = flags; -+ -+ /* Set all Ethernet station address registers to their initial values */ -+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | -+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF)); -+ -+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | -+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | -+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | -+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF)); -+ -+ sp->eth_regs->mac_addr[0] = ethsah; -+ sp->eth_regs->mac_addr[1] = ethsal; -+ -+ mdelay(10); -+ -+ return (0); -+} -+ -+ -+static int ar231x_init(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ int ecode = 0; -+ -+ /* -+ * Allocate descriptors -+ */ -+ if (ar231x_allocate_descriptors(dev)) { -+ printk("%s: %s: ar231x_allocate_descriptors failed\n", -+ dev->name, __FUNCTION__); -+ ecode = -EAGAIN; -+ goto init_error; -+ } -+ -+ /* -+ * Get the memory for the skb rings. -+ */ -+ if (sp->rx_skb == NULL) { -+ sp->rx_skb = -+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, -+ GFP_KERNEL); -+ if (!(sp->rx_skb)) { -+ printk("%s: %s: rx_skb kmalloc failed\n", -+ dev->name, __FUNCTION__); -+ ecode = -EAGAIN; -+ goto init_error; -+ } -+ } -+ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); -+ -+ if (sp->tx_skb == NULL) { -+ sp->tx_skb = -+ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, -+ GFP_KERNEL); -+ if (!(sp->tx_skb)) { -+ printk("%s: %s: tx_skb kmalloc failed\n", -+ dev->name, __FUNCTION__); -+ ecode = -EAGAIN; -+ goto init_error; -+ } -+ } -+ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); -+ -+ /* -+ * Set tx_csm before we start receiving interrupts, otherwise -+ * the interrupt handler might think it is supposed to process -+ * tx ints before we are up and running, which may cause a null -+ * pointer access in the int handler. -+ */ -+ sp->rx_skbprd = 0; -+ sp->cur_rx = 0; -+ sp->tx_prd = 0; -+ sp->tx_csm = 0; -+ -+ /* -+ * Zero the stats before starting the interface -+ */ -+ memset(&dev->stats, 0, sizeof(dev->stats)); -+ -+ /* -+ * We load the ring here as there seem to be no way to tell the -+ * firmware to wipe the ring without re-initializing it. -+ */ -+ ar231x_load_rx_ring(dev, RX_RING_SIZE); -+ -+ /* -+ * Init hardware -+ */ -+ ar231x_reset_reg(dev); -+ -+ /* -+ * Get the IRQ -+ */ -+ ecode = -+ request_irq(dev->irq, &ar231x_interrupt, -+ IRQF_DISABLED, -+ dev->name, dev); -+ if (ecode) { -+ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n", -+ dev->name, __FUNCTION__, dev->irq); -+ goto init_error; -+ } -+ -+ -+ tasklet_enable(&sp->rx_tasklet); -+ -+ return 0; -+ -+ init_error: -+ ar231x_init_cleanup(dev); -+ return ecode; -+} -+ -+/* -+ * Load the rx ring. -+ * -+ * Loading rings is safe without holding the spin lock since this is -+ * done only before the device is enabled, thus no interrupts are -+ * generated and by the interrupt handler/tasklet handler. -+ */ -+static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs) -+{ -+ -+ struct ar231x_private *sp = netdev_priv(dev); -+ short i, idx; -+ -+ idx = sp->rx_skbprd; -+ -+ for (i = 0; i < nr_bufs; i++) { -+ struct sk_buff *skb; -+ ar231x_descr_t *rd; -+ -+ if (sp->rx_skb[idx]) -+ break; -+ -+ skb = netdev_alloc_skb_ip_align(dev, AR2313_BUFSIZE); -+ if (!skb) { -+ printk("\n\n\n\n %s: No memory in system\n\n\n\n", -+ __FUNCTION__); -+ break; -+ } -+ -+ /* -+ * Make sure IP header starts on a fresh cache line. -+ */ -+ skb->dev = dev; -+ sp->rx_skb[idx] = skb; -+ -+ rd = (ar231x_descr_t *) & sp->rx_ring[idx]; -+ -+ /* initialize dma descriptor */ -+ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | -+ DMA_RX1_CHAINED); -+ rd->addr = virt_to_phys(skb->data); -+ rd->descr = -+ virt_to_phys(&sp-> -+ rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]); -+ rd->status = DMA_RX_OWN; -+ -+ idx = DSC_NEXT(idx); -+ } -+ -+ if (i) -+ sp->rx_skbprd = idx; -+ -+ return; -+} -+ -+#define AR2313_MAX_PKTS_PER_CALL 64 -+ -+static int ar231x_rx_int(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ struct sk_buff *skb, *skb_new; -+ ar231x_descr_t *rxdesc; -+ unsigned int status; -+ u32 idx; -+ int pkts = 0; -+ int rval; -+ -+ idx = sp->cur_rx; -+ -+ /* process at most the entire ring and then wait for another interrupt -+ */ -+ while (1) { -+ -+ rxdesc = &sp->rx_ring[idx]; -+ status = rxdesc->status; -+ if (status & DMA_RX_OWN) { -+ /* SiByte owns descriptor or descr not yet filled in */ -+ rval = 0; -+ break; -+ } -+ -+ if (++pkts > AR2313_MAX_PKTS_PER_CALL) { -+ rval = 1; -+ break; -+ } -+ -+ if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) { -+ dev->stats.rx_errors++; -+ dev->stats.rx_dropped++; -+ -+ /* add statistics counters */ -+ if (status & DMA_RX_ERR_CRC) -+ dev->stats.rx_crc_errors++; -+ if (status & DMA_RX_ERR_COL) -+ dev->stats.rx_over_errors++; -+ if (status & DMA_RX_ERR_LENGTH) -+ dev->stats.rx_length_errors++; -+ if (status & DMA_RX_ERR_RUNT) -+ dev->stats.rx_over_errors++; -+ if (status & DMA_RX_ERR_DESC) -+ dev->stats.rx_over_errors++; -+ -+ } else { -+ /* alloc new buffer. */ -+ skb_new = netdev_alloc_skb_ip_align(dev, AR2313_BUFSIZE); -+ if (skb_new != NULL) { -+ -+ skb = sp->rx_skb[idx]; -+ /* set skb */ -+ skb_put(skb, -+ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN); -+ -+ dev->stats.rx_bytes += skb->len; -+ skb->protocol = eth_type_trans(skb, dev); -+ /* pass the packet to upper layers */ -+ netif_rx(skb); -+ -+ skb_new->dev = dev; -+ /* reset descriptor's curr_addr */ -+ rxdesc->addr = virt_to_phys(skb_new->data); -+ -+ dev->stats.rx_packets++; -+ sp->rx_skb[idx] = skb_new; -+ } else { -+ dev->stats.rx_dropped++; -+ } -+ } -+ -+ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | -+ DMA_RX1_CHAINED); -+ rxdesc->status = DMA_RX_OWN; -+ -+ idx = DSC_NEXT(idx); -+ } -+ -+ sp->cur_rx = idx; -+ -+ return rval; -+} -+ -+ -+static void ar231x_tx_int(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ u32 idx; -+ struct sk_buff *skb; -+ ar231x_descr_t *txdesc; -+ unsigned int status = 0; -+ -+ idx = sp->tx_csm; -+ -+ while (idx != sp->tx_prd) { -+ txdesc = &sp->tx_ring[idx]; -+ -+ if ((status = txdesc->status) & DMA_TX_OWN) { -+ /* ar231x dma still owns descr */ -+ break; -+ } -+ /* done with this descriptor */ -+ dma_unmap_single(NULL, txdesc->addr, -+ txdesc->devcs & DMA_TX1_BSIZE_MASK, -+ DMA_TO_DEVICE); -+ txdesc->status = 0; -+ -+ if (status & DMA_TX_ERROR) { -+ dev->stats.tx_errors++; -+ dev->stats.tx_dropped++; -+ if (status & DMA_TX_ERR_UNDER) -+ dev->stats.tx_fifo_errors++; -+ if (status & DMA_TX_ERR_HB) -+ dev->stats.tx_heartbeat_errors++; -+ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK)) -+ dev->stats.tx_carrier_errors++; -+ if (status & (DMA_TX_ERR_LATE | -+ DMA_TX_ERR_COL | -+ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER)) -+ dev->stats.tx_aborted_errors++; -+ } else { -+ /* transmit OK */ -+ dev->stats.tx_packets++; -+ } -+ -+ skb = sp->tx_skb[idx]; -+ sp->tx_skb[idx] = NULL; -+ idx = DSC_NEXT(idx); -+ dev->stats.tx_bytes += skb->len; -+ dev_kfree_skb_irq(skb); -+ } -+ -+ sp->tx_csm = idx; -+ -+ return; -+} -+ -+ -+static void rx_tasklet_func(unsigned long data) -+{ -+ struct net_device *dev = (struct net_device *) data; -+ struct ar231x_private *sp = netdev_priv(dev); -+ -+ if (sp->unloading) { -+ return; -+ } -+ -+ if (ar231x_rx_int(dev)) { -+ tasklet_hi_schedule(&sp->rx_tasklet); -+ } else { -+ unsigned long flags; -+ spin_lock_irqsave(&sp->lock, flags); -+ sp->dma_regs->intr_ena |= DMA_STATUS_RI; -+ spin_unlock_irqrestore(&sp->lock, flags); -+ } -+} -+ -+static void rx_schedule(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ -+ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI; -+ -+ tasklet_hi_schedule(&sp->rx_tasklet); -+} -+ -+static irqreturn_t ar231x_interrupt(int irq, void *dev_id) -+{ -+ struct net_device *dev = (struct net_device *) dev_id; -+ struct ar231x_private *sp = netdev_priv(dev); -+ unsigned int status, enabled; -+ -+ /* clear interrupt */ -+ /* -+ * Don't clear RI bit if currently disabled. -+ */ -+ status = sp->dma_regs->status; -+ enabled = sp->dma_regs->intr_ena; -+ sp->dma_regs->status = status & enabled; -+ -+ if (status & DMA_STATUS_NIS) { -+ /* normal status */ -+ /* -+ * Don't schedule rx processing if interrupt -+ * is already disabled. -+ */ -+ if (status & enabled & DMA_STATUS_RI) { -+ /* receive interrupt */ -+ rx_schedule(dev); -+ } -+ if (status & DMA_STATUS_TI) { -+ /* transmit interrupt */ -+ ar231x_tx_int(dev); -+ } -+ } -+ -+ /* abnormal status */ -+ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) { -+ ar231x_restart(dev); -+ } -+ return IRQ_HANDLED; -+} -+ -+ -+static int ar231x_open(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ unsigned int ethsal, ethsah; -+ -+ /* reset the hardware, in case the MAC address changed */ -+ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | -+ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF)); -+ -+ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | -+ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | -+ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | -+ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF)); -+ -+ sp->eth_regs->mac_addr[0] = ethsah; -+ sp->eth_regs->mac_addr[1] = ethsal; -+ -+ mdelay(10); -+ -+ dev->mtu = 1500; -+ netif_start_queue(dev); -+ -+ sp->eth_regs->mac_control |= MAC_CONTROL_RE; -+ -+ return 0; -+} -+ -+static void ar231x_tx_timeout(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&sp->lock, flags); -+ ar231x_restart(dev); -+ spin_unlock_irqrestore(&sp->lock, flags); -+} -+ -+static void ar231x_halt(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ int j; -+ -+ tasklet_disable(&sp->rx_tasklet); -+ -+ /* kill the MAC */ -+ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */ -+ MAC_CONTROL_TE); /* disable Transmits */ -+ /* stop dma */ -+ sp->dma_regs->control = 0; -+ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR; -+ -+ /* place phy and MAC in reset */ -+ *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy); -+ -+ /* free buffers on tx ring */ -+ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { -+ struct sk_buff *skb; -+ ar231x_descr_t *txdesc; -+ -+ txdesc = &sp->tx_ring[j]; -+ txdesc->descr = 0; -+ -+ skb = sp->tx_skb[j]; -+ if (skb) { -+ dev_kfree_skb(skb); -+ sp->tx_skb[j] = NULL; -+ } -+ } -+} -+ -+/* -+ * close should do nothing. Here's why. It's called when -+ * 'ifconfig bond0 down' is run. If it calls free_irq then -+ * the irq is gone forever ! When bond0 is made 'up' again, -+ * the ar231x_open () does not call request_irq (). Worse, -+ * the call to ar231x_halt() generates a WDOG reset due to -+ * the write to 'sp->int_regs' and the box reboots. -+ * Commenting this out is good since it allows the -+ * system to resume when bond0 is made up again. -+ */ -+static int ar231x_close(struct net_device *dev) -+{ -+#if 0 -+ /* -+ * Disable interrupts -+ */ -+ disable_irq(dev->irq); -+ -+ /* -+ * Without (or before) releasing irq and stopping hardware, this -+ * is an absolute non-sense, by the way. It will be reset instantly -+ * by the first irq. -+ */ -+ netif_stop_queue(dev); -+ -+ /* stop the MAC and DMA engines */ -+ ar231x_halt(dev); -+ -+ /* release the interrupt */ -+ free_irq(dev->irq, dev); -+ -+#endif -+ return 0; -+} -+ -+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ ar231x_descr_t *td; -+ u32 idx; -+ -+ idx = sp->tx_prd; -+ td = &sp->tx_ring[idx]; -+ -+ if (td->status & DMA_TX_OWN) { -+ /* free skbuf and lie to the caller that we sent it out */ -+ dev->stats.tx_dropped++; -+ dev_kfree_skb(skb); -+ -+ /* restart transmitter in case locked */ -+ sp->dma_regs->xmt_poll = 0; -+ return 0; -+ } -+ -+ /* Setup the transmit descriptor. */ -+ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) | -+ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED)); -+ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE); -+ td->status = DMA_TX_OWN; -+ -+ /* kick transmitter last */ -+ sp->dma_regs->xmt_poll = 0; -+ -+ sp->tx_skb[idx] = skb; -+ idx = DSC_NEXT(idx); -+ sp->tx_prd = idx; -+ -+ return 0; -+} -+ -+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ int ret; -+ -+ switch (cmd) { -+ -+ case SIOCETHTOOL: -+ spin_lock_irq(&sp->lock); -+ ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data); -+ spin_unlock_irq(&sp->lock); -+ return ret; -+ -+ case SIOCSIFHWADDR: -+ if (copy_from_user -+ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr))) -+ return -EFAULT; -+ return 0; -+ -+ case SIOCGIFHWADDR: -+ if (copy_to_user -+ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr))) -+ return -EFAULT; -+ return 0; -+ -+ case SIOCGMIIPHY: -+ case SIOCGMIIREG: -+ case SIOCSMIIREG: -+ return phy_mii_ioctl(sp->phy_dev, ifr, cmd); -+ -+ default: -+ break; -+ } -+ -+ return -EOPNOTSUPP; -+} -+ -+static void ar231x_adjust_link(struct net_device *dev) -+{ -+ struct ar231x_private *sp = netdev_priv(dev); -+ unsigned int mc; -+ -+ if (!sp->phy_dev->link) -+ return; -+ -+ if (sp->phy_dev->duplex != sp->oldduplex) { -+ mc = readl(&sp->eth_regs->mac_control); -+ mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO); -+ if (sp->phy_dev->duplex) -+ mc |= MAC_CONTROL_F; -+ else -+ mc |= MAC_CONTROL_DRO; -+ writel(mc, &sp->eth_regs->mac_control); -+ sp->oldduplex = sp->phy_dev->duplex; -+ } -+} -+ -+#define MII_ADDR(phy, reg) \ -+ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT)) -+ -+static int -+ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) -+{ -+ struct net_device *const dev = bus->priv; -+ struct ar231x_private *sp = netdev_priv(dev); -+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs; -+ -+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum); -+ while (ethernet->mii_addr & MII_ADDR_BUSY); -+ return (ethernet->mii_data >> MII_DATA_SHIFT); -+} -+ -+static int -+ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, -+ u16 value) -+{ -+ struct net_device *const dev = bus->priv; -+ struct ar231x_private *sp = netdev_priv(dev); -+ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs; -+ -+ while (ethernet->mii_addr & MII_ADDR_BUSY); -+ ethernet->mii_data = value << MII_DATA_SHIFT; -+ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE; -+ -+ return 0; -+} -+ -+static int ar231x_mdiobus_reset(struct mii_bus *bus) -+{ -+ struct net_device *const dev = bus->priv; -+ -+ ar231x_reset_reg(dev); -+ -+ return 0; -+} -+ -+static int ar231x_mdiobus_probe (struct net_device *dev) -+{ -+ struct ar231x_private *const sp = netdev_priv(dev); -+ struct phy_device *phydev = NULL; -+ int phy_addr; -+ -+ /* find the first (lowest address) PHY on the current MAC's MII bus */ -+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) -+ if (sp->mii_bus->phy_map[phy_addr]) { -+ phydev = sp->mii_bus->phy_map[phy_addr]; -+ sp->phy = phy_addr; -+ break; /* break out with first one found */ -+ } -+ -+ if (!phydev) { -+ printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name); -+ return -1; -+ } -+ -+ /* now we are supposed to have a proper phydev, to attach to... */ -+ BUG_ON(!phydev); -+ BUG_ON(phydev->attached_dev); -+ -+ phydev = phy_connect(dev, dev_name(&phydev->dev), &ar231x_adjust_link, 0, -+ PHY_INTERFACE_MODE_MII); -+ -+ if (IS_ERR(phydev)) { -+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); -+ return PTR_ERR(phydev); -+ } -+ -+ /* mask with MAC supported features */ -+ phydev->supported &= (SUPPORTED_10baseT_Half -+ | SUPPORTED_10baseT_Full -+ | SUPPORTED_100baseT_Half -+ | SUPPORTED_100baseT_Full -+ | SUPPORTED_Autoneg -+ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */ -+ | SUPPORTED_MII -+ | SUPPORTED_TP); -+ -+ phydev->advertising = phydev->supported; -+ -+ sp->oldduplex = -1; -+ sp->phy_dev = phydev; -+ -+ printk(KERN_INFO "%s: attached PHY driver [%s] " -+ "(mii_bus:phy_addr=%s)\n", -+ dev->name, phydev->drv->name, dev_name(&phydev->dev)); -+ -+ return 0; -+} -+ ---- /dev/null -+++ b/drivers/net/ethernet/ar231x/ar231x.h -@@ -0,0 +1,303 @@ -+/* -+ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device. -+ * -+ * Copyright (C) 2004 by Sameer Dekate <sdekate@arubanetworks.com> -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> -+ * -+ * Thanks to Atheros for providing hardware and documentation -+ * enabling me to write this driver. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ */ -+ -+#ifndef _AR2313_H_ -+#define _AR2313_H_ -+ -+#include <linux/interrupt.h> -+#include <generated/autoconf.h> -+#include <linux/bitops.h> -+#include <asm/bootinfo.h> -+#include <ar231x_platform.h> -+ -+/* -+ * probe link timer - 5 secs -+ */ -+#define LINK_TIMER (5*HZ) -+ -+#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0) -+#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0) -+#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0) -+ -+#define AR2313_TX_TIMEOUT (HZ/4) -+ -+/* -+ * Rings -+ */ -+#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc)) -+#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1)) -+ -+#define AR2313_MBGET 2 -+#define AR2313_MBSET 3 -+#define AR2313_PCI_RECONFIG 4 -+#define AR2313_PCI_DUMP 5 -+#define AR2313_TEST_PANIC 6 -+#define AR2313_TEST_NULLPTR 7 -+#define AR2313_READ_DATA 8 -+#define AR2313_WRITE_DATA 9 -+#define AR2313_GET_VERSION 10 -+#define AR2313_TEST_HANG 11 -+#define AR2313_SYNC 12 -+ -+#define DMA_RX_ERR_CRC BIT(1) -+#define DMA_RX_ERR_DRIB BIT(2) -+#define DMA_RX_ERR_MII BIT(3) -+#define DMA_RX_EV2 BIT(5) -+#define DMA_RX_ERR_COL BIT(6) -+#define DMA_RX_LONG BIT(7) -+#define DMA_RX_LS BIT(8) /* last descriptor */ -+#define DMA_RX_FS BIT(9) /* first descriptor */ -+#define DMA_RX_MF BIT(10) /* multicast frame */ -+#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */ -+#define DMA_RX_ERR_LENGTH BIT(12) /* length error */ -+#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */ -+#define DMA_RX_ERROR BIT(15) /* error summary */ -+#define DMA_RX_LEN_MASK 0x3fff0000 -+#define DMA_RX_LEN_SHIFT 16 -+#define DMA_RX_FILT BIT(30) -+#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */ -+ -+#define DMA_RX1_BSIZE_MASK 0x000007ff -+#define DMA_RX1_BSIZE_SHIFT 0 -+#define DMA_RX1_CHAINED BIT(24) -+#define DMA_RX1_RER BIT(25) -+ -+#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */ -+#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */ -+#define DMA_TX_COL_MASK 0x78 -+#define DMA_TX_COL_SHIFT 3 -+#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */ -+#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */ -+#define DMA_TX_ERR_LATE BIT(9) /* late collision */ -+#define DMA_TX_ERR_LINK BIT(10) /* no carrier */ -+#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */ -+#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */ -+#define DMA_TX_ERROR BIT(15) /* frame aborted */ -+#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */ -+ -+#define DMA_TX1_BSIZE_MASK 0x000007ff -+#define DMA_TX1_BSIZE_SHIFT 0 -+#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */ -+#define DMA_TX1_TER BIT(25) /* transmit end of ring */ -+#define DMA_TX1_FS BIT(29) /* first segment */ -+#define DMA_TX1_LS BIT(30) /* last segment */ -+#define DMA_TX1_IC BIT(31) /* interrupt on completion */ -+ -+#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */ -+ -+#define MAC_CONTROL_RE BIT(2) /* receive enable */ -+#define MAC_CONTROL_TE BIT(3) /* transmit enable */ -+#define MAC_CONTROL_DC BIT(5) /* Deferral check */ -+#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */ -+#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */ -+#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */ -+#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */ -+#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */ -+#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */ -+#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */ -+#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */ -+#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */ -+#define MAC_CONTROL_PR BIT(18) /* promiscuous mode (valid frames only) */ -+#define MAC_CONTROL_PM BIT(19) /* pass multicast */ -+#define MAC_CONTROL_F BIT(20) /* full-duplex */ -+#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */ -+#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */ -+#define MAC_CONTROL_BLE BIT(30) /* big endian mode */ -+#define MAC_CONTROL_RA BIT(31) /* receive all (valid and invalid frames) */ -+ -+#define MII_ADDR_BUSY BIT(0) -+#define MII_ADDR_WRITE BIT(1) -+#define MII_ADDR_REG_SHIFT 6 -+#define MII_ADDR_PHY_SHIFT 11 -+#define MII_DATA_SHIFT 0 -+ -+#define FLOW_CONTROL_FCE BIT(1) -+ -+#define DMA_BUS_MODE_SWR BIT(0) /* software reset */ -+#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */ -+#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */ -+#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */ -+ -+#define DMA_STATUS_TI BIT(0) /* transmit interrupt */ -+#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */ -+#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */ -+#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */ -+#define DMA_STATUS_UNF BIT(5) /* transmit underflow */ -+#define DMA_STATUS_RI BIT(6) /* receive interrupt */ -+#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */ -+#define DMA_STATUS_RPS BIT(8) /* receive process stopped */ -+#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */ -+#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */ -+#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */ -+#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */ -+#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */ -+#define DMA_STATUS_RS_SHIFT 17 /* receive process state */ -+#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */ -+#define DMA_STATUS_EB_SHIFT 23 /* error bits */ -+ -+#define DMA_CONTROL_SR BIT(1) /* start receive */ -+#define DMA_CONTROL_ST BIT(13) /* start transmit */ -+#define DMA_CONTROL_SF BIT(21) /* store and forward */ -+ -+ -+typedef struct { -+ volatile unsigned int status; // OWN, Device control and status. -+ volatile unsigned int devcs; // pkt Control bits + Length -+ volatile unsigned int addr; // Current Address. -+ volatile unsigned int descr; // Next descriptor in chain. -+} ar231x_descr_t; -+ -+ -+ -+// -+// New Combo structure for Both Eth0 AND eth1 -+// -+typedef struct { -+ volatile unsigned int mac_control; /* 0x00 */ -+ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */ -+ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */ -+ volatile unsigned int mii_addr; /* 0x14 */ -+ volatile unsigned int mii_data; /* 0x18 */ -+ volatile unsigned int flow_control; /* 0x1c */ -+ volatile unsigned int vlan_tag; /* 0x20 */ -+ volatile unsigned int pad[7]; /* 0x24 - 0x3c */ -+ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */ -+ -+} ETHERNET_STRUCT; -+ -+/******************************************************************** -+ * Interrupt controller -+ ********************************************************************/ -+ -+typedef struct { -+ volatile unsigned int wdog_control; /* 0x08 */ -+ volatile unsigned int wdog_timer; /* 0x0c */ -+ volatile unsigned int misc_status; /* 0x10 */ -+ volatile unsigned int misc_mask; /* 0x14 */ -+ volatile unsigned int global_status; /* 0x18 */ -+ volatile unsigned int reserved; /* 0x1c */ -+ volatile unsigned int reset_control; /* 0x20 */ -+} INTERRUPT; -+ -+/******************************************************************** -+ * DMA controller -+ ********************************************************************/ -+typedef struct { -+ volatile unsigned int bus_mode; /* 0x00 (CSR0) */ -+ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */ -+ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */ -+ volatile unsigned int rcv_base; /* 0x0c (CSR3) */ -+ volatile unsigned int xmt_base; /* 0x10 (CSR4) */ -+ volatile unsigned int status; /* 0x14 (CSR5) */ -+ volatile unsigned int control; /* 0x18 (CSR6) */ -+ volatile unsigned int intr_ena; /* 0x1c (CSR7) */ -+ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */ -+ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */ -+ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */ -+ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */ -+} DMA; -+ -+/* -+ * Struct private for the Sibyte. -+ * -+ * Elements are grouped so variables used by the tx handling goes -+ * together, and will go into the same cache lines etc. in order to -+ * avoid cache line contention between the rx and tx handling on SMP. -+ * -+ * Frequently accessed variables are put at the beginning of the -+ * struct to help the compiler generate better/shorter code. -+ */ -+struct ar231x_private { -+ struct net_device *dev; -+ int version; -+ u32 mb[2]; -+ -+ volatile ETHERNET_STRUCT *phy_regs; -+ volatile ETHERNET_STRUCT *eth_regs; -+ volatile DMA *dma_regs; -+ volatile u32 *int_regs; -+ struct ar231x_eth *cfg; -+ -+ spinlock_t lock; /* Serialise access to device */ -+ -+ /* -+ * RX and TX descriptors, must be adjacent -+ */ -+ ar231x_descr_t *rx_ring; -+ ar231x_descr_t *tx_ring; -+ -+ -+ struct sk_buff **rx_skb; -+ struct sk_buff **tx_skb; -+ -+ /* -+ * RX elements -+ */ -+ u32 rx_skbprd; -+ u32 cur_rx; -+ -+ /* -+ * TX elements -+ */ -+ u32 tx_prd; -+ u32 tx_csm; -+ -+ /* -+ * Misc elements -+ */ -+ char name[48]; -+ struct { -+ u32 address; -+ u32 length; -+ char *mapping; -+ } desc; -+ -+ -+ struct timer_list link_timer; -+ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */ -+ unsigned short mac; -+ unsigned short link; /* 0 - link down, 1 - link up */ -+ u16 phyData; -+ -+ struct tasklet_struct rx_tasklet; -+ int unloading; -+ -+ struct phy_device *phy_dev; -+ struct mii_bus *mii_bus; -+ int oldduplex; -+}; -+ -+ -+/* -+ * Prototypes -+ */ -+static int ar231x_init(struct net_device *dev); -+#ifdef TX_TIMEOUT -+static void ar231x_tx_timeout(struct net_device *dev); -+#endif -+static int ar231x_restart(struct net_device *dev); -+static void ar231x_load_rx_ring(struct net_device *dev, int bufs); -+static irqreturn_t ar231x_interrupt(int irq, void *dev_id); -+static int ar231x_open(struct net_device *dev); -+static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev); -+static int ar231x_close(struct net_device *dev); -+static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, -+ int cmd); -+static void ar231x_init_cleanup(struct net_device *dev); -+static int ar231x_setup_timer(struct net_device *dev); -+static void ar231x_link_timer_fn(unsigned long data); -+static void ar231x_check_link(struct net_device *dev); -+#endif /* _AR2313_H_ */ diff --git a/target/linux/atheros/patches-3.8/120-spiflash.patch b/target/linux/atheros/patches-3.8/120-spiflash.patch deleted file mode 100644 index 33e862865d..0000000000 --- a/target/linux/atheros/patches-3.8/120-spiflash.patch +++ /dev/null @@ -1,662 +0,0 @@ ---- a/drivers/mtd/devices/Kconfig -+++ b/drivers/mtd/devices/Kconfig -@@ -136,6 +136,10 @@ config MTD_BCM47XXSFLASH - registered by bcma as platform devices. This enables driver for - serial flash memories (only read-only mode is implemented). - -+config MTD_AR2315 -+ tristate "Atheros AR2315+ SPI Flash support" -+ depends on ATHEROS_AR2315 -+ - config MTD_SLRAM - tristate "Uncached system RAM" - help ---- a/drivers/mtd/devices/Makefile -+++ b/drivers/mtd/devices/Makefile -@@ -19,6 +19,7 @@ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataf - obj-$(CONFIG_MTD_M25P80) += m25p80.o - obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o - obj-$(CONFIG_MTD_SST25L) += sst25l.o -+obj-$(CONFIG_MTD_AR2315) += ar2315.o - obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o - --CFLAGS_docg3.o += -I$(src) -\ No newline at end of file -+CFLAGS_docg3.o += -I$(src) ---- /dev/null -+++ b/drivers/mtd/devices/ar2315.c -@@ -0,0 +1,515 @@ -+ -+/* -+ * MTD driver for the SPI Flash Memory support on Atheros AR2315 -+ * -+ * Copyright (c) 2005-2006 Atheros Communications Inc. -+ * Copyright (C) 2006-2007 FON Technology, SL. -+ * Copyright (C) 2006-2007 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> -+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com> -+ * -+ * This code is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/types.h> -+#include <linux/version.h> -+#include <linux/errno.h> -+#include <linux/slab.h> -+#include <linux/mtd/mtd.h> -+#include <linux/mtd/partitions.h> -+#include <linux/platform_device.h> -+#include <linux/sched.h> -+#include <linux/root_dev.h> -+#include <linux/delay.h> -+#include <asm/delay.h> -+#include <asm/io.h> -+ -+#include <ar2315_spiflash.h> -+#include <ar231x_platform.h> -+#include <ar231x.h> -+ -+ -+#define SPIFLASH "spiflash: " -+#define busy_wait(_priv, _condition, _wait) do { \ -+ while (_condition) { \ -+ spin_unlock_bh(&_priv->lock); \ -+ if (_wait > 1) \ -+ msleep(_wait); \ -+ else if ((_wait == 1) && need_resched()) \ -+ schedule(); \ -+ else \ -+ udelay(1); \ -+ spin_lock_bh(&_priv->lock); \ -+ } \ -+} while (0) -+ -+enum { -+ FLASH_NONE, -+ FLASH_1MB, -+ FLASH_2MB, -+ FLASH_4MB, -+ FLASH_8MB, -+ FLASH_16MB, -+}; -+ -+/* Flash configuration table */ -+struct flashconfig { -+ u32 byte_cnt; -+ u32 sector_cnt; -+ u32 sector_size; -+}; -+ -+const struct flashconfig flashconfig_tbl[] = { -+ [FLASH_NONE] = { 0, 0, 0}, -+ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE}, -+ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE}, -+ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE}, -+ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE}, -+ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE} -+}; -+ -+/* Mapping of generic opcodes to STM serial flash opcodes */ -+enum { -+ SPI_WRITE_ENABLE, -+ SPI_WRITE_DISABLE, -+ SPI_RD_STATUS, -+ SPI_WR_STATUS, -+ SPI_RD_DATA, -+ SPI_FAST_RD_DATA, -+ SPI_PAGE_PROGRAM, -+ SPI_SECTOR_ERASE, -+ SPI_BULK_ERASE, -+ SPI_DEEP_PWRDOWN, -+ SPI_RD_SIG, -+}; -+ -+struct opcodes { -+ __u16 code; -+ __s8 tx_cnt; -+ __s8 rx_cnt; -+}; -+const struct opcodes stm_opcodes[] = { -+ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0}, -+ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0}, -+ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1}, -+ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0}, -+ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4}, -+ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0}, -+ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0}, -+ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0}, -+ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0}, -+ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0}, -+ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1}, -+}; -+ -+/* Driver private data structure */ -+struct spiflash_priv { -+ struct mtd_info mtd; -+ void *readaddr; /* memory mapped data for read */ -+ void *mmraddr; /* memory mapped register space */ -+ wait_queue_head_t wq; -+ spinlock_t lock; -+ int state; -+}; -+ -+#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd) -+ -+enum { -+ FL_READY, -+ FL_READING, -+ FL_ERASING, -+ FL_WRITING -+}; -+ -+/***************************************************************************************************/ -+ -+static u32 -+spiflash_read_reg(struct spiflash_priv *priv, int reg) -+{ -+ return ar231x_read_reg((u32) priv->mmraddr + reg); -+} -+ -+static void -+spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data) -+{ -+ ar231x_write_reg((u32) priv->mmraddr + reg, data); -+} -+ -+static u32 -+spiflash_wait_busy(struct spiflash_priv *priv) -+{ -+ u32 reg; -+ -+ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) & -+ SPI_CTL_BUSY, 0); -+ return reg; -+} -+ -+static u32 -+spiflash_sendcmd (struct spiflash_priv *priv, int opcode, u32 addr) -+{ -+ const struct opcodes *op; -+ u32 reg, mask; -+ -+ op = &stm_opcodes[opcode]; -+ reg = spiflash_wait_busy(priv); -+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, -+ ((u32) op->code) | (addr << 8)); -+ -+ reg &= ~SPI_CTL_TX_RX_CNT_MASK; -+ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4); -+ -+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg); -+ spiflash_wait_busy(priv); -+ -+ if (!op->rx_cnt) -+ return 0; -+ -+ reg = spiflash_read_reg(priv, SPI_FLASH_DATA); -+ -+ switch (op->rx_cnt) { -+ case 1: -+ mask = 0x000000ff; -+ break; -+ case 2: -+ mask = 0x0000ffff; -+ break; -+ case 3: -+ mask = 0x00ffffff; -+ break; -+ default: -+ mask = 0xffffffff; -+ break; -+ } -+ reg &= mask; -+ -+ return reg; -+} -+ -+ -+/* -+ * Probe SPI flash device -+ * Function returns 0 for failure. -+ * and flashconfig_tbl array index for success. -+ */ -+static int -+spiflash_probe_chip (struct spiflash_priv *priv) -+{ -+ u32 sig; -+ int flash_size; -+ -+ /* Read the signature on the flash device */ -+ spin_lock_bh(&priv->lock); -+ sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0); -+ spin_unlock_bh(&priv->lock); -+ -+ switch (sig) { -+ case STM_8MBIT_SIGNATURE: -+ flash_size = FLASH_1MB; -+ break; -+ case STM_16MBIT_SIGNATURE: -+ flash_size = FLASH_2MB; -+ break; -+ case STM_32MBIT_SIGNATURE: -+ flash_size = FLASH_4MB; -+ break; -+ case STM_64MBIT_SIGNATURE: -+ flash_size = FLASH_8MB; -+ break; -+ case STM_128MBIT_SIGNATURE: -+ flash_size = FLASH_16MB; -+ break; -+ default: -+ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n"); -+ return 0; -+ } -+ -+ return flash_size; -+} -+ -+ -+/* wait until the flash chip is ready and grab a lock */ -+static int spiflash_wait_ready(struct spiflash_priv *priv, int state) -+{ -+ DECLARE_WAITQUEUE(wait, current); -+ -+retry: -+ spin_lock_bh(&priv->lock); -+ if (priv->state != FL_READY) { -+ set_current_state(TASK_UNINTERRUPTIBLE); -+ add_wait_queue(&priv->wq, &wait); -+ spin_unlock_bh(&priv->lock); -+ schedule(); -+ remove_wait_queue(&priv->wq, &wait); -+ -+ if(signal_pending(current)) -+ return 0; -+ -+ goto retry; -+ } -+ priv->state = state; -+ -+ return 1; -+} -+ -+static inline void spiflash_done(struct spiflash_priv *priv) -+{ -+ priv->state = FL_READY; -+ spin_unlock_bh(&priv->lock); -+ wake_up(&priv->wq); -+} -+ -+static void -+spiflash_wait_complete(struct spiflash_priv *priv, unsigned int timeout) -+{ -+ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) & -+ SPI_STATUS_WIP, timeout); -+ spiflash_done(priv); -+} -+ -+ -+ -+static int -+spiflash_erase (struct mtd_info *mtd, struct erase_info *instr) -+{ -+ struct spiflash_priv *priv = to_spiflash(mtd); -+ const struct opcodes *op; -+ u32 temp, reg; -+ -+ if (instr->addr + instr->len > mtd->size) -+ return -EINVAL; -+ -+ if (!spiflash_wait_ready(priv, FL_ERASING)) -+ return -EINTR; -+ -+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0); -+ reg = spiflash_wait_busy(priv); -+ -+ op = &stm_opcodes[SPI_SECTOR_ERASE]; -+ temp = ((u32)instr->addr << 8) | (u32)(op->code); -+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp); -+ -+ reg &= ~SPI_CTL_TX_RX_CNT_MASK; -+ reg |= op->tx_cnt | SPI_CTL_START; -+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg); -+ -+ spiflash_wait_complete(priv, 20); -+ -+ instr->state = MTD_ERASE_DONE; -+ mtd_erase_callback(instr); -+ -+ return 0; -+} -+ -+static int -+spiflash_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) -+{ -+ struct spiflash_priv *priv = to_spiflash(mtd); -+ u8 *read_addr; -+ -+ if (!len) -+ return 0; -+ -+ if (from + len > mtd->size) -+ return -EINVAL; -+ -+ *retlen = len; -+ -+ if (!spiflash_wait_ready(priv, FL_READING)) -+ return -EINTR; -+ -+ read_addr = (u8 *)(priv->readaddr + from); -+ memcpy_fromio(buf, read_addr, len); -+ spiflash_done(priv); -+ -+ return 0; -+} -+ -+static int -+spiflash_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u8 *buf) -+{ -+ struct spiflash_priv *priv = to_spiflash(mtd); -+ u32 opcode, bytes_left; -+ -+ *retlen = 0; -+ -+ if (!len) -+ return 0; -+ -+ if (to + len > mtd->size) -+ return -EINVAL; -+ -+ bytes_left = len; -+ -+ do { -+ u32 read_len, reg, page_offset, spi_data = 0; -+ -+ read_len = min(bytes_left, sizeof(u32)); -+ -+ /* 32-bit writes cannot span across a page boundary -+ * (256 bytes). This types of writes require two page -+ * program operations to handle it correctly. The STM part -+ * will write the overflow data to the beginning of the -+ * current page as opposed to the subsequent page. -+ */ -+ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len; -+ -+ if (page_offset > STM_PAGE_SIZE) -+ read_len -= (page_offset - STM_PAGE_SIZE); -+ -+ if (!spiflash_wait_ready(priv, FL_WRITING)) -+ return -EINTR; -+ -+ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0); -+ spi_data = 0; -+ switch (read_len) { -+ case 4: -+ spi_data |= buf[3] << 24; -+ /* fall through */ -+ case 3: -+ spi_data |= buf[2] << 16; -+ /* fall through */ -+ case 2: -+ spi_data |= buf[1] << 8; -+ /* fall through */ -+ case 1: -+ spi_data |= buf[0] & 0xff; -+ break; -+ default: -+ break; -+ } -+ -+ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data); -+ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code | -+ (to & 0x00ffffff) << 8; -+ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode); -+ -+ reg = spiflash_read_reg(priv, SPI_FLASH_CTL); -+ reg &= ~SPI_CTL_TX_RX_CNT_MASK; -+ reg |= (read_len + 4) | SPI_CTL_START; -+ spiflash_write_reg(priv, SPI_FLASH_CTL, reg); -+ -+ spiflash_wait_complete(priv, 1); -+ -+ bytes_left -= read_len; -+ to += read_len; -+ buf += read_len; -+ -+ *retlen += read_len; -+ } while (bytes_left != 0); -+ -+ return 0; -+} -+ -+ -+#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS -+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL }; -+#endif -+ -+ -+static int -+spiflash_probe(struct platform_device *pdev) -+{ -+ struct spiflash_priv *priv; -+ struct mtd_info *mtd; -+ int index; -+ int result = 0; -+ -+ priv = kzalloc(sizeof(struct spiflash_priv), GFP_KERNEL); -+ spin_lock_init(&priv->lock); -+ init_waitqueue_head(&priv->wq); -+ priv->state = FL_READY; -+ mtd = &priv->mtd; -+ -+ priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE); -+ if (!priv->mmraddr) { -+ printk(KERN_WARNING SPIFLASH "Failed to map flash device\n"); -+ goto error; -+ } -+ -+ index = spiflash_probe_chip(priv); -+ if (!index) { -+ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n"); -+ goto error; -+ } -+ -+ priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt); -+ if (!priv->readaddr) { -+ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n"); -+ goto error; -+ } -+ -+ platform_set_drvdata(pdev, priv); -+ mtd->name = "spiflash"; -+ mtd->type = MTD_NORFLASH; -+ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE); -+ mtd->size = flashconfig_tbl[index].byte_cnt; -+ mtd->erasesize = flashconfig_tbl[index].sector_size; -+ mtd->writesize = 1; -+ mtd->numeraseregions = 0; -+ mtd->eraseregions = NULL; -+ mtd->_erase = spiflash_erase; -+ mtd->_read = spiflash_read; -+ mtd->_write = spiflash_write; -+ mtd->owner = THIS_MODULE; -+ -+#if defined CONFIG_MTD_REDBOOT_PARTS || CONFIG_MTD_MYLOADER_PARTS -+ /* parse redboot partitions */ -+ -+ result = mtd_device_parse_register(mtd, part_probe_types, -+ NULL, NULL, 0); -+#endif -+ -+ return result; -+ -+error: -+ if (priv->mmraddr) -+ iounmap(priv->mmraddr); -+ kfree(priv); -+ return -ENXIO; -+} -+ -+static int -+spiflash_remove (struct platform_device *pdev) -+{ -+ struct spiflash_priv *priv = platform_get_drvdata(pdev); -+ struct mtd_info *mtd = &priv->mtd; -+ -+ mtd_device_unregister(mtd); -+ iounmap(priv->mmraddr); -+ iounmap(priv->readaddr); -+ kfree(priv); -+ -+ return 0; -+} -+ -+struct platform_driver spiflash_driver = { -+ .driver.name = "spiflash", -+ .probe = spiflash_probe, -+ .remove = spiflash_remove, -+}; -+ -+int __init -+spiflash_init (void) -+{ -+ return platform_driver_register(&spiflash_driver); -+} -+ -+void __exit -+spiflash_exit (void) -+{ -+ return platform_driver_unregister(&spiflash_driver); -+} -+ -+module_init (spiflash_init); -+module_exit (spiflash_exit); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc"); -+MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC"); -+ ---- /dev/null -+++ b/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h -@@ -0,0 +1,116 @@ -+/* -+ * SPI Flash Memory support header file. -+ * -+ * Copyright (c) 2005, Atheros Communications Inc. -+ * Copyright (C) 2006 FON Technology, SL. -+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> -+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> -+ * -+ * This code is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+#ifndef __AR2315_SPIFLASH_H -+#define __AR2315_SPIFLASH_H -+ -+#define STM_PAGE_SIZE 256 -+ -+#define SFI_WRITE_BUFFER_SIZE 4 -+#define SFI_FLASH_ADDR_MASK 0x00ffffff -+ -+#define STM_8MBIT_SIGNATURE 0x13 -+#define STM_M25P80_BYTE_COUNT 1048576 -+#define STM_M25P80_SECTOR_COUNT 16 -+#define STM_M25P80_SECTOR_SIZE 0x10000 -+ -+#define STM_16MBIT_SIGNATURE 0x14 -+#define STM_M25P16_BYTE_COUNT 2097152 -+#define STM_M25P16_SECTOR_COUNT 32 -+#define STM_M25P16_SECTOR_SIZE 0x10000 -+ -+#define STM_32MBIT_SIGNATURE 0x15 -+#define STM_M25P32_BYTE_COUNT 4194304 -+#define STM_M25P32_SECTOR_COUNT 64 -+#define STM_M25P32_SECTOR_SIZE 0x10000 -+ -+#define STM_64MBIT_SIGNATURE 0x16 -+#define STM_M25P64_BYTE_COUNT 8388608 -+#define STM_M25P64_SECTOR_COUNT 128 -+#define STM_M25P64_SECTOR_SIZE 0x10000 -+ -+#define STM_128MBIT_SIGNATURE 0x17 -+#define STM_M25P128_BYTE_COUNT 16777216 -+#define STM_M25P128_SECTOR_COUNT 256 -+#define STM_M25P128_SECTOR_SIZE 0x10000 -+ -+#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT -+#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT -+#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE -+#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT -+#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT -+#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE -+#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT -+#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT -+#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE -+#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT -+#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT -+#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE -+#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT -+#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT -+#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE -+ -+/* -+ * ST Microelectronics Opcodes for Serial Flash -+ */ -+ -+#define STM_OP_WR_ENABLE 0x06 /* Write Enable */ -+#define STM_OP_WR_DISABLE 0x04 /* Write Disable */ -+#define STM_OP_RD_STATUS 0x05 /* Read Status */ -+#define STM_OP_WR_STATUS 0x01 /* Write Status */ -+#define STM_OP_RD_DATA 0x03 /* Read Data */ -+#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */ -+#define STM_OP_PAGE_PGRM 0x02 /* Page Program */ -+#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */ -+#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */ -+#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */ -+#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */ -+ -+#define STM_STATUS_WIP 0x01 /* Write-In-Progress */ -+#define STM_STATUS_WEL 0x02 /* Write Enable Latch */ -+#define STM_STATUS_BP0 0x04 /* Block Protect 0 */ -+#define STM_STATUS_BP1 0x08 /* Block Protect 1 */ -+#define STM_STATUS_BP2 0x10 /* Block Protect 2 */ -+#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */ -+ -+/* -+ * SPI Flash Interface Registers -+ */ -+#define AR531XPLUS_SPI_READ 0x08000000 -+#define AR531XPLUS_SPI_MMR 0x11300000 -+#define AR531XPLUS_SPI_MMR_SIZE 12 -+ -+#define AR531XPLUS_SPI_CTL 0x00 -+#define AR531XPLUS_SPI_OPCODE 0x04 -+#define AR531XPLUS_SPI_DATA 0x08 -+ -+#define SPI_FLASH_READ AR531XPLUS_SPI_READ -+#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR -+#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE -+#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL -+#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE -+#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA -+ -+#define SPI_CTL_START 0x00000100 -+#define SPI_CTL_BUSY 0x00010000 -+#define SPI_CTL_TXCNT_MASK 0x0000000f -+#define SPI_CTL_RXCNT_MASK 0x000000f0 -+#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff -+#define SPI_CTL_SIZE_MASK 0x00060000 -+ -+#define SPI_CTL_CLK_SEL_MASK 0x03000000 -+#define SPI_OPCODE_MASK 0x000000ff -+ -+#define SPI_STATUS_WIP STM_STATUS_WIP -+ -+#endif diff --git a/target/linux/atheros/patches-3.8/130-watchdog.patch b/target/linux/atheros/patches-3.8/130-watchdog.patch deleted file mode 100644 index 085f31547a..0000000000 --- a/target/linux/atheros/patches-3.8/130-watchdog.patch +++ /dev/null @@ -1,227 +0,0 @@ ---- /dev/null -+++ b/drivers/watchdog/ar2315-wtd.c -@@ -0,0 +1,199 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -+ * -+ * Copyright (C) 2008 John Crispin <blogic@openwrt.org> -+ * Based on EP93xx and ifxmips wdt driver -+ */ -+ -+#include <linux/interrupt.h> -+#include <linux/module.h> -+#include <linux/moduleparam.h> -+#include <linux/types.h> -+#include <linux/miscdevice.h> -+#include <linux/watchdog.h> -+#include <linux/fs.h> -+#include <linux/ioport.h> -+#include <linux/notifier.h> -+#include <linux/reboot.h> -+#include <linux/init.h> -+#include <linux/platform_device.h> -+ -+#include <asm/io.h> -+#include <asm/uaccess.h> -+#include <asm/addrspace.h> -+#include <ar231x_platform.h> -+#include <ar2315_regs.h> -+#include <ar231x.h> -+ -+#define CLOCK_RATE 40000000 -+#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x) -+ -+static int wdt_timeout = 20; -+static int started = 0; -+static int in_use = 0; -+ -+static void -+ar2315_wdt_enable(void) -+{ -+ ar231x_write_reg(AR2315_WD, wdt_timeout * CLOCK_RATE); -+ ar231x_write_reg(AR2315_ISR, 0x80); -+} -+ -+static ssize_t -+ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) -+{ -+ if(len) -+ ar2315_wdt_enable(); -+ return len; -+} -+ -+static int -+ar2315_wdt_open(struct inode *inode, struct file *file) -+{ -+ if(in_use) -+ return -EBUSY; -+ ar2315_wdt_enable(); -+ in_use = started = 1; -+ return nonseekable_open(inode, file); -+} -+ -+static int -+ar2315_wdt_release(struct inode *inode, struct file *file) -+{ -+ in_use = 0; -+ return 0; -+} -+ -+static irqreturn_t -+ar2315_wdt_interrupt(int irq, void *dev_id) -+{ -+ if(started) -+ { -+ printk(KERN_CRIT "watchdog expired, rebooting system\n"); -+ emergency_restart(); -+ } else { -+ ar231x_write_reg(AR2315_WDC, 0); -+ ar231x_write_reg(AR2315_WD, 0); -+ ar231x_write_reg(AR2315_ISR, 0x80); -+ } -+ return IRQ_HANDLED; -+} -+ -+static struct watchdog_info ident = { -+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, -+ .identity = "ar2315 Watchdog", -+}; -+ -+static long -+ar2315_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -+{ -+ int new_wdt_timeout; -+ int ret = -ENOIOCTLCMD; -+ -+ switch(cmd) -+ { -+ case WDIOC_GETSUPPORT: -+ ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0; -+ break; -+ -+ case WDIOC_KEEPALIVE: -+ ar2315_wdt_enable(); -+ ret = 0; -+ break; -+ -+ case WDIOC_SETTIMEOUT: -+ if((ret = get_user(new_wdt_timeout, (int __user *)arg))) -+ break; -+ wdt_timeout = HEARTBEAT(new_wdt_timeout); -+ ar2315_wdt_enable(); -+ break; -+ -+ case WDIOC_GETTIMEOUT: -+ ret = put_user(wdt_timeout, (int __user *)arg); -+ break; -+ } -+ return ret; -+} -+ -+static struct file_operations ar2315_wdt_fops = { -+ .owner = THIS_MODULE, -+ .llseek = no_llseek, -+ .write = ar2315_wdt_write, -+ .unlocked_ioctl = ar2315_wdt_ioctl, -+ .open = ar2315_wdt_open, -+ .release = ar2315_wdt_release, -+}; -+ -+static struct miscdevice ar2315_wdt_miscdev = { -+ .minor = WATCHDOG_MINOR, -+ .name = "watchdog", -+ .fops = &ar2315_wdt_fops, -+}; -+ -+static int -+ar2315_wdt_probe(struct platform_device *dev) -+{ -+ int ret = 0; -+ -+ ar2315_wdt_enable(); -+ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL); -+ if(ret) -+ { -+ printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n"); -+ goto out; -+ } -+ -+ ret = misc_register(&ar2315_wdt_miscdev); -+ if(ret) -+ printk(KERN_ERR "ar2315wdt: failed to register miscdev\n"); -+ -+out: -+ return ret; -+} -+ -+static int -+ar2315_wdt_remove(struct platform_device *dev) -+{ -+ misc_deregister(&ar2315_wdt_miscdev); -+ free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL); -+ return 0; -+} -+ -+static struct platform_driver ar2315_wdt_driver = { -+ .probe = ar2315_wdt_probe, -+ .remove = ar2315_wdt_remove, -+ .driver = { -+ .name = "ar2315_wdt", -+ .owner = THIS_MODULE, -+ }, -+}; -+ -+static int __init -+init_ar2315_wdt(void) -+{ -+ int ret = platform_driver_register(&ar2315_wdt_driver); -+ if(ret) -+ printk(KERN_INFO "ar2315_wdt: error registering platfom driver!"); -+ return ret; -+} -+ -+static void __exit -+exit_ar2315_wdt(void) -+{ -+ platform_driver_unregister(&ar2315_wdt_driver); -+} -+ -+module_init(init_ar2315_wdt); -+module_exit(exit_ar2315_wdt); ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -1077,6 +1077,12 @@ config LANTIQ_WDT - help - Hardware driver for the Lantiq SoC Watchdog Timer. - -+config ATHEROS_WDT -+ tristate "Atheros wisoc Watchdog Timer" -+ depends on ATHEROS_AR231X -+ help -+ Hardware driver for the Atheros wisoc Watchdog Timer. -+ - # PARISC Architecture - - # POWERPC Architecture ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -128,6 +128,7 @@ obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o - obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o -+obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o - obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o - octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o diff --git a/target/linux/atheros/patches-3.8/140-redboot_boardconfig.patch b/target/linux/atheros/patches-3.8/140-redboot_boardconfig.patch deleted file mode 100644 index 4191b0d426..0000000000 --- a/target/linux/atheros/patches-3.8/140-redboot_boardconfig.patch +++ /dev/null @@ -1,60 +0,0 @@ ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -30,6 +30,8 @@ - #include <linux/mtd/partitions.h> - #include <linux/module.h> - -+#define BOARD_CONFIG_PART "boardconfig" -+ - struct fis_image_desc { - unsigned char name[16]; // Null terminated name - uint32_t flash_base; // Address within FLASH of image -@@ -60,6 +62,7 @@ static int parse_redboot_partitions(stru - struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { -+ unsigned long max_offset = 0; - int nrparts = 0; - struct fis_image_desc *buf; - struct mtd_partition *parts; -@@ -225,14 +228,14 @@ static int parse_redboot_partitions(stru - } - } - #endif -- parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL); -+ parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + sizeof(BOARD_CONFIG_PART), GFP_KERNEL); - - if (!parts) { - ret = -ENOMEM; - goto out; - } - -- nullname = (char *)&parts[nrparts]; -+ nullname = (char *)&parts[nrparts + 1]; - #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED - if (nulllen > 0) { - strcpy(nullname, nullstring); -@@ -251,6 +254,8 @@ static int parse_redboot_partitions(stru - } - #endif - for ( ; i<nrparts; i++) { -+ if(max_offset < buf[i].flash_base + buf[i].size) -+ max_offset = buf[i].flash_base + buf[i].size; - parts[i].size = fl->img->size; - parts[i].offset = fl->img->flash_base; - parts[i].name = names; -@@ -284,6 +289,14 @@ static int parse_redboot_partitions(stru - fl = fl->next; - kfree(tmp_fl); - } -+ if(master->size - max_offset >= master->erasesize) -+ { -+ parts[nrparts].size = master->size - max_offset; -+ parts[nrparts].offset = max_offset; -+ parts[nrparts].name = names; -+ strcpy(names, BOARD_CONFIG_PART); -+ nrparts++; -+ } - ret = nrparts; - *pparts = parts; - out: diff --git a/target/linux/atheros/patches-3.8/141-redboot_partition_scan.patch b/target/linux/atheros/patches-3.8/141-redboot_partition_scan.patch deleted file mode 100644 index c255baf8c6..0000000000 --- a/target/linux/atheros/patches-3.8/141-redboot_partition_scan.patch +++ /dev/null @@ -1,44 +0,0 @@ ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -79,12 +79,18 @@ static int parse_redboot_partitions(stru - static char nullstring[] = "unallocated"; - #endif - -+ buf = vmalloc(master->erasesize); -+ if (!buf) -+ return -ENOMEM; -+ -+ restart: - if ( directory < 0 ) { - offset = master->size + directory * master->erasesize; - while (mtd_block_isbad(master, offset)) { - if (!offset) { - nogood: - printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n"); -+ vfree(buf); - return -EIO; - } - offset -= master->erasesize; -@@ -97,10 +103,6 @@ static int parse_redboot_partitions(stru - goto nogood; - } - } -- buf = vmalloc(master->erasesize); -- -- if (!buf) -- return -ENOMEM; - - printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n", - master->name, offset); -@@ -173,6 +175,11 @@ static int parse_redboot_partitions(stru - } - if (i == numslots) { - /* Didn't find it */ -+ if (offset + master->erasesize < master->size) { -+ /* not at the end of the flash yet, maybe next block :) */ -+ directory++; -+ goto restart; -+ } - printk(KERN_NOTICE "No RedBoot partition table detected in %s\n", - master->name); - ret = 0; diff --git a/target/linux/atheros/patches-3.8/142-redboot_various_erase_size_fix.patch b/target/linux/atheros/patches-3.8/142-redboot_various_erase_size_fix.patch deleted file mode 100644 index fa00dcd3b4..0000000000 --- a/target/linux/atheros/patches-3.8/142-redboot_various_erase_size_fix.patch +++ /dev/null @@ -1,72 +0,0 @@ ---- a/drivers/mtd/redboot.c -+++ b/drivers/mtd/redboot.c -@@ -58,6 +58,22 @@ static inline int redboot_checksum(struc - return 1; - } - -+static uint32_t mtd_get_offset_erasesize(struct mtd_info *mtd, uint64_t offset) -+{ -+ struct mtd_erase_region_info *regions = mtd->eraseregions; -+ int i; -+ -+ for (i = 0; i < mtd->numeraseregions; i++) { -+ if (regions[i].offset + -+ regions[i].numblocks * regions[i].erasesize <= offset) -+ continue; -+ -+ return regions[i].erasesize; -+ } -+ -+ return mtd->erasesize; -+} -+ - static int parse_redboot_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - struct mtd_part_parser_data *data) -@@ -74,6 +90,7 @@ static int parse_redboot_partitions(stru - int namelen = 0; - int nulllen = 0; - int numslots; -+ int first_slot; - unsigned long offset; - #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED - static char nullstring[] = "unallocated"; -@@ -186,7 +203,10 @@ static int parse_redboot_partitions(stru - goto out; - } - -- for (i = 0; i < numslots; i++) { -+ first_slot = (buf[i].flash_base & (master->erasesize - 1)) / -+ sizeof(struct fis_image_desc); -+ -+ for (i = first_slot; i < first_slot + numslots; i++) { - struct fis_list *new_fl, **prev; - - if (buf[i].name[0] == 0xff) { -@@ -261,12 +281,13 @@ static int parse_redboot_partitions(stru - } - #endif - for ( ; i<nrparts; i++) { -- if(max_offset < buf[i].flash_base + buf[i].size) -- max_offset = buf[i].flash_base + buf[i].size; - parts[i].size = fl->img->size; - parts[i].offset = fl->img->flash_base; - parts[i].name = names; - -+ if (max_offset < parts[i].offset + parts[i].size) -+ max_offset = parts[i].offset + parts[i].size; -+ - strcpy(names, fl->img->name); - #ifdef CONFIG_MTD_REDBOOT_PARTS_READONLY - if (!memcmp(names, "RedBoot", 8) || -@@ -296,7 +317,9 @@ static int parse_redboot_partitions(stru - fl = fl->next; - kfree(tmp_fl); - } -- if(master->size - max_offset >= master->erasesize) -+ -+ if (master->size - max_offset >= -+ mtd_get_offset_erasesize(master, max_offset)) - { - parts[nrparts].size = master->size - max_offset; - parts[nrparts].offset = max_offset; diff --git a/target/linux/atheros/patches-3.8/210-reset_button.patch b/target/linux/atheros/patches-3.8/210-reset_button.patch deleted file mode 100644 index c1471903c4..0000000000 --- a/target/linux/atheros/patches-3.8/210-reset_button.patch +++ /dev/null @@ -1,72 +0,0 @@ ---- a/arch/mips/ar231x/Makefile -+++ b/arch/mips/ar231x/Makefile -@@ -8,7 +8,7 @@ - # Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> - # - --obj-y += board.o prom.o devices.o -+obj-y += board.o prom.o devices.o reset.o - - obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - ---- /dev/null -+++ b/arch/mips/ar231x/reset.c -@@ -0,0 +1,58 @@ -+#include <linux/init.h> -+#include <linux/slab.h> -+#include <linux/platform_device.h> -+#include <linux/gpio_keys.h> -+#include <linux/input.h> -+#include <ar231x_platform.h> -+#include <ar231x.h> -+#include "devices.h" -+ -+static int __init -+ar231x_init_reset(void) -+{ -+ struct platform_device *pdev; -+ struct gpio_keys_platform_data pdata; -+ struct gpio_keys_button *p; -+ int err; -+ -+ if (ar231x_board.config->resetConfigGpio == 0xffff) -+ return -ENODEV; -+ -+ p = kzalloc(sizeof(*p), GFP_KERNEL); -+ if (!p) -+ goto err; -+ -+ p->desc = "reset"; -+ p->type = EV_KEY; -+ p->code = KEY_RESTART; -+ p->debounce_interval = 60; -+ p->gpio = ar231x_board.config->resetConfigGpio; -+ -+ memset(&pdata, 0, sizeof(pdata)); -+ pdata.poll_interval = 20; -+ pdata.buttons = p; -+ pdata.nbuttons = 1; -+ -+ pdev = platform_device_alloc("gpio-keys-polled", 0); -+ if (!pdev) -+ goto err_free; -+ -+ err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); -+ if (err) -+ goto err_put_pdev; -+ -+ err = platform_device_add(pdev); -+ if (err) -+ goto err_put_pdev; -+ -+ return 0; -+ -+err_put_pdev: -+ platform_device_put(pdev); -+err_free: -+ kfree(p); -+err: -+ return -ENOMEM; -+} -+ -+module_init(ar231x_init_reset); diff --git a/target/linux/atheros/patches-3.8/220-enet_micrel_workaround.patch b/target/linux/atheros/patches-3.8/220-enet_micrel_workaround.patch deleted file mode 100644 index da86857213..0000000000 --- a/target/linux/atheros/patches-3.8/220-enet_micrel_workaround.patch +++ /dev/null @@ -1,86 +0,0 @@ ---- a/drivers/net/ethernet/ar231x/ar231x.c -+++ b/drivers/net/ethernet/ar231x/ar231x.c -@@ -150,6 +150,7 @@ static int ar231x_mdiobus_write(struct m - static int ar231x_mdiobus_reset(struct mii_bus *bus); - static int ar231x_mdiobus_probe (struct net_device *dev); - static void ar231x_adjust_link(struct net_device *dev); -+static bool no_phy = false; - - #ifndef ERR - #define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args) -@@ -182,6 +183,30 @@ static const struct net_device_ops ar231 - #endif - }; - -+static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id) -+{ -+ int phy_reg; -+ -+ /* Grab the bits from PHYIR1, and put them -+ * in the upper half */ -+ phy_reg = mdiobus_read(bus, addr, MII_PHYSID1); -+ -+ if (phy_reg < 0) -+ return -EIO; -+ -+ *phy_id = (phy_reg & 0xffff) << 16; -+ -+ /* Grab the bits from PHYIR2, and put them in the lower half */ -+ phy_reg = mdiobus_read(bus, addr, MII_PHYSID2); -+ -+ if (phy_reg < 0) -+ return -EIO; -+ -+ *phy_id |= (phy_reg & 0xffff); -+ -+ return 0; -+} -+ - int ar231x_probe(struct platform_device *pdev) - { - struct net_device *dev; -@@ -299,6 +324,21 @@ int ar231x_probe(struct platform_device - - mdiobus_register(sp->mii_bus); - -+ /* Workaround for Micrel switch, which is only available on -+ * one PHY and cannot be configured through MDIO */ -+ if (!no_phy) { -+ u32 phy_id = 0; -+ get_phy_id(sp->mii_bus, 1, &phy_id); -+ if (phy_id == 0x00221450) -+ no_phy = true; -+ } -+ if (no_phy) { -+ sp->link = 1; -+ netif_carrier_on(dev); -+ return 0; -+ } -+ no_phy = true; -+ - if (ar231x_mdiobus_probe(dev) != 0) { - printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name); - rx_tasklet_cleanup(dev); -@@ -355,8 +395,10 @@ static int ar231x_remove(struct platform - rx_tasklet_cleanup(dev); - ar231x_init_cleanup(dev); - unregister_netdev(dev); -- mdiobus_unregister(sp->mii_bus); -- mdiobus_free(sp->mii_bus); -+ if (sp->mii_bus) { -+ mdiobus_unregister(sp->mii_bus); -+ mdiobus_free(sp->mii_bus); -+ } - kfree(dev); - return 0; - } -@@ -1132,6 +1174,9 @@ static int ar231x_ioctl(struct net_devic - struct ar231x_private *sp = netdev_priv(dev); - int ret; - -+ if (!sp->phy_dev) -+ return -ENODEV; -+ - switch (cmd) { - - case SIOCETHTOOL: |