diff options
Diffstat (limited to 'target/linux')
10 files changed, 734 insertions, 308 deletions
diff --git a/target/linux/ipq806x/patches-4.9/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch b/target/linux/ipq806x/patches-4.9/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch new file mode 100644 index 0000000000..7a315627f3 --- /dev/null +++ b/target/linux/ipq806x/patches-4.9/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch @@ -0,0 +1,95 @@ +From 86655aa14304ca88a8ce8847276147dbc1a83238 Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan <smuthayy@codeaurora.org> +Date: Tue, 19 Jul 2016 18:44:49 +0530 +Subject: PCI: qcom: Fixed IPQ806x specific clocks + +Change-Id: I488e1bc707d6a22b37a338f41935e3922009ba5e +Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> +--- + drivers/pci/host/pcie-qcom.c | 38 +++++++++++++++++++++++++++++++++----- + 1 file changed, 33 insertions(+), 5 deletions(-) + +--- a/drivers/pci/host/pcie-qcom.c ++++ b/drivers/pci/host/pcie-qcom.c +@@ -53,6 +53,8 @@ struct qcom_pcie_resources_v0 { + struct clk *iface_clk; + struct clk *core_clk; + struct clk *phy_clk; ++ struct clk *aux_clk; ++ struct clk *ref_clk; + struct reset_control *pci_reset; + struct reset_control *axi_reset; + struct reset_control *ahb_reset; +@@ -160,6 +162,14 @@ static int qcom_pcie_get_resources_v0(st + if (IS_ERR(res->phy_clk)) + return PTR_ERR(res->phy_clk); + ++ res->aux_clk = devm_clk_get(dev, "aux"); ++ if (IS_ERR(res->aux_clk)) ++ return PTR_ERR(res->aux_clk); ++ ++ res->ref_clk = devm_clk_get(dev, "ref"); ++ if (IS_ERR(res->ref_clk)) ++ return PTR_ERR(res->ref_clk); ++ + res->pci_reset = devm_reset_control_get(dev, "pci"); + if (IS_ERR(res->pci_reset)) + return PTR_ERR(res->pci_reset); +@@ -227,6 +237,8 @@ static void qcom_pcie_deinit_v0(struct q + clk_disable_unprepare(res->iface_clk); + clk_disable_unprepare(res->core_clk); + clk_disable_unprepare(res->phy_clk); ++ clk_disable_unprepare(res->aux_clk); ++ clk_disable_unprepare(res->ref_clk); + regulator_disable(res->vdda); + regulator_disable(res->vdda_phy); + regulator_disable(res->vdda_refclk); +@@ -269,16 +281,28 @@ static int qcom_pcie_init_v0(struct qcom + goto err_assert_ahb; + } + ++ ret = clk_prepare_enable(res->core_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable core clock\n"); ++ goto err_clk_core; ++ } ++ + ret = clk_prepare_enable(res->phy_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable phy clock\n"); + goto err_clk_phy; + } + +- ret = clk_prepare_enable(res->core_clk); ++ ret = clk_prepare_enable(res->aux_clk); + if (ret) { +- dev_err(dev, "cannot prepare/enable core clock\n"); +- goto err_clk_core; ++ dev_err(dev, "cannot prepare/enable aux clock\n"); ++ goto err_clk_aux; ++ } ++ ++ ret = clk_prepare_enable(res->ref_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable ref clock\n"); ++ goto err_clk_ref; + } + + ret = reset_control_deassert(res->ahb_reset); +@@ -327,10 +351,14 @@ static int qcom_pcie_init_v0(struct qcom + return 0; + + err_deassert_ahb: +- clk_disable_unprepare(res->core_clk); +-err_clk_core: ++ clk_disable_unprepare(res->ref_clk); ++err_clk_ref: ++ clk_disable_unprepare(res->aux_clk); ++err_clk_aux: + clk_disable_unprepare(res->phy_clk); + err_clk_phy: ++ clk_disable_unprepare(res->core_clk); ++err_clk_core: + clk_disable_unprepare(res->iface_clk); + err_assert_ahb: + regulator_disable(res->vdda_phy); diff --git a/target/linux/ipq806x/patches-4.9/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch b/target/linux/ipq806x/patches-4.9/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch new file mode 100644 index 0000000000..aab4f364e6 --- /dev/null +++ b/target/linux/ipq806x/patches-4.9/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch @@ -0,0 +1,85 @@ +From 490d103232287eb51c92c49a4ef8865fd0a9d59e Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan <smuthayy@codeaurora.org> +Date: Tue, 19 Jul 2016 18:58:18 +0530 +Subject: PCI: qcom: Fixed IPQ806x PCIE reset changes + +Change-Id: Ia6590e960b9754b1e8b7a51f318788cd63e9e321 +Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> +--- + drivers/pci/host/pcie-qcom.c | 24 +++++++++++++++++++----- + 1 file changed, 19 insertions(+), 5 deletions(-) + +--- a/drivers/pci/host/pcie-qcom.c ++++ b/drivers/pci/host/pcie-qcom.c +@@ -60,6 +60,7 @@ struct qcom_pcie_resources_v0 { + struct reset_control *ahb_reset; + struct reset_control *por_reset; + struct reset_control *phy_reset; ++ struct reset_control *ext_reset; + struct regulator *vdda; + struct regulator *vdda_phy; + struct regulator *vdda_refclk; +@@ -190,6 +191,10 @@ static int qcom_pcie_get_resources_v0(st + if (IS_ERR(res->phy_reset)) + return PTR_ERR(res->phy_reset); + ++ res->ext_reset = devm_reset_control_get(dev, "ext"); ++ if (IS_ERR(res->ext_reset)) ++ return PTR_ERR(res->ext_reset); ++ + return 0; + } + +@@ -234,6 +239,7 @@ static void qcom_pcie_deinit_v0(struct q + reset_control_assert(res->ahb_reset); + reset_control_assert(res->por_reset); + reset_control_assert(res->pci_reset); ++ reset_control_assert(res->ext_reset); + clk_disable_unprepare(res->iface_clk); + clk_disable_unprepare(res->core_clk); + clk_disable_unprepare(res->phy_clk); +@@ -251,6 +257,12 @@ static int qcom_pcie_init_v0(struct qcom + u32 val; + int ret; + ++ ret = reset_control_assert(res->ahb_reset); ++ if (ret) { ++ dev_err(dev, "cannot assert ahb reset\n"); ++ return ret; ++ } ++ + ret = regulator_enable(res->vdda); + if (ret) { + dev_err(dev, "cannot enable vdda regulator\n"); +@@ -269,16 +281,16 @@ static int qcom_pcie_init_v0(struct qcom + goto err_vdda_phy; + } + +- ret = reset_control_assert(res->ahb_reset); ++ ret = reset_control_deassert(res->ext_reset); + if (ret) { +- dev_err(dev, "cannot assert ahb reset\n"); +- goto err_assert_ahb; ++ dev_err(dev, "cannot assert ext reset\n"); ++ goto err_reset_ext; + } + + ret = clk_prepare_enable(res->iface_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable iface clock\n"); +- goto err_assert_ahb; ++ goto err_iface; + } + + ret = clk_prepare_enable(res->core_clk); +@@ -360,7 +372,9 @@ err_clk_phy: + clk_disable_unprepare(res->core_clk); + err_clk_core: + clk_disable_unprepare(res->iface_clk); +-err_assert_ahb: ++err_iface: ++ reset_control_assert(res->ext_reset); ++err_reset_ext: + regulator_disable(res->vdda_phy); + err_vdda_phy: + regulator_disable(res->vdda_refclk); diff --git a/target/linux/ipq806x/patches-4.9/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch b/target/linux/ipq806x/patches-4.9/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch new file mode 100644 index 0000000000..6c68edfe99 --- /dev/null +++ b/target/linux/ipq806x/patches-4.9/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch @@ -0,0 +1,127 @@ +From eddd13215d0f2b549ebc5f0e8796d5b1231f90a0 Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan <smuthayy@codeaurora.org> +Date: Tue, 19 Jul 2016 19:58:22 +0530 +Subject: PCI: qcom: Fixed IPQ806x PCIE init changes + +Change-Id: Ic319b1aec27a47809284759f8fcb6a8815b7cf7e +Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> +--- + drivers/pci/host/pcie-qcom.c | 62 +++++++++++++++++++++++++++++++++++++------- + 1 file changed, 53 insertions(+), 9 deletions(-) + +--- a/drivers/pci/host/pcie-qcom.c ++++ b/drivers/pci/host/pcie-qcom.c +@@ -37,7 +37,13 @@ + #include "pcie-designware.h" + + #define PCIE20_PARF_PHY_CTRL 0x40 ++#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16) ++#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16) ++ + #define PCIE20_PARF_PHY_REFCLK 0x4C ++#define REF_SSP_EN BIT(16) ++#define REF_USE_PAD BIT(12) ++ + #define PCIE20_PARF_DBI_BASE_ADDR 0x168 + #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c + #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 +@@ -48,6 +54,18 @@ + #define PCIE20_CAP 0x70 + + #define PERST_DELAY_US 1000 ++/* PARF registers */ ++#define PCIE20_PARF_PCS_DEEMPH 0x34 ++#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16) ++#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8) ++#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0) ++ ++#define PCIE20_PARF_PCS_SWING 0x38 ++#define PCS_SWING_TX_SWING_FULL(x) (x << 8) ++#define PCS_SWING_TX_SWING_LOW(x) (x << 0) ++ ++#define PCIE20_PARF_CONFIG_BITS 0x50 ++#define PHY_RX0_EQ(x) (x << 24) + + struct qcom_pcie_resources_v0 { + struct clk *iface_clk; +@@ -64,6 +82,7 @@ struct qcom_pcie_resources_v0 { + struct regulator *vdda; + struct regulator *vdda_phy; + struct regulator *vdda_refclk; ++ uint8_t phy_tx0_term_offset; + }; + + struct qcom_pcie_resources_v1 { +@@ -100,6 +119,16 @@ struct qcom_pcie { + + #define to_qcom_pcie(x) container_of(x, struct qcom_pcie, pp) + ++static inline void ++writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask) ++{ ++ u32 val = readl(addr); ++ ++ val &= ~clear_mask; ++ val |= set_mask; ++ writel(val, addr); ++} ++ + static void qcom_ep_reset_assert(struct qcom_pcie *pcie) + { + gpiod_set_value(pcie->reset, 1); +@@ -195,6 +224,10 @@ static int qcom_pcie_get_resources_v0(st + if (IS_ERR(res->ext_reset)) + return PTR_ERR(res->ext_reset); + ++ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset", ++ &res->phy_tx0_term_offset)) ++ res->phy_tx0_term_offset = 0; ++ + return 0; + } + +@@ -254,7 +287,6 @@ static int qcom_pcie_init_v0(struct qcom + { + struct qcom_pcie_resources_v0 *res = &pcie->res.v0; + struct device *dev = pcie->pp.dev; +- u32 val; + int ret; + + ret = reset_control_assert(res->ahb_reset); +@@ -323,15 +355,27 @@ static int qcom_pcie_init_v0(struct qcom + goto err_deassert_ahb; + } + +- /* enable PCIe clocks and resets */ +- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); +- val &= ~BIT(0); +- writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); +- +- /* enable external reference clock */ +- val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK); +- val |= BIT(16); +- writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK); ++ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0); ++ ++ /* Set Tx termination offset */ ++ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, ++ PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK, ++ PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset)); ++ ++ /* PARF programming */ ++ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) | ++ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) | ++ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22), ++ pcie->parf + PCIE20_PARF_PCS_DEEMPH); ++ writel(PCS_SWING_TX_SWING_FULL(0x78) | ++ PCS_SWING_TX_SWING_LOW(0x78), ++ pcie->parf + PCIE20_PARF_PCS_SWING); ++ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS); ++ ++ /* Enable reference clock */ ++ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK, ++ REF_USE_PAD, REF_SSP_EN); ++ + + ret = reset_control_deassert(res->phy_reset); + if (ret) { diff --git a/target/linux/ipq806x/patches-4.9/0071-4-PCIE-designware-Fixed-PCI-host-init.patch b/target/linux/ipq806x/patches-4.9/0071-4-PCIE-designware-Fixed-PCI-host-init.patch new file mode 100644 index 0000000000..af9e121f82 --- /dev/null +++ b/target/linux/ipq806x/patches-4.9/0071-4-PCIE-designware-Fixed-PCI-host-init.patch @@ -0,0 +1,68 @@ +From e833cdb5c792912d459773cc23153e5d78875d34 Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan <smuthayy@codeaurora.org> +Date: Tue, 19 Jul 2016 20:05:25 +0530 +Subject: PCIE: designware: Fixed PCI host init + +Change-Id: I949b302d77199fc09342acf26b7bb45a7ec467ee +Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> +--- + drivers/pci/host/pcie-designware.c | 9 +++++++-- + drivers/pci/host/pcie-designware.h | 2 +- + drivers/pci/host/pcie-qcom.c | 5 +++-- + 3 files changed, 11 insertions(+), 5 deletions(-) + +--- a/drivers/pci/host/pcie-designware.c ++++ b/drivers/pci/host/pcie-designware.c +@@ -637,8 +637,13 @@ int dw_pcie_host_init(struct pcie_port * + } + } + +- if (pp->ops->host_init) +- pp->ops->host_init(pp); ++ if (pp->ops->host_init) { ++ ret = pp->ops->host_init(pp); ++ if (ret) { ++ dev_err(pp->dev, "hostinit failed\n"); ++ return 0; ++ } ++ } + + pp->root_bus_nr = pp->busn->start; + if (IS_ENABLED(CONFIG_PCI_MSI)) { +--- a/drivers/pci/host/pcie-designware.h ++++ b/drivers/pci/host/pcie-designware.h +@@ -63,7 +63,7 @@ struct pcie_host_ops { + int (*wr_other_conf)(struct pcie_port *pp, struct pci_bus *bus, + unsigned int devfn, int where, int size, u32 val); + int (*link_up)(struct pcie_port *pp); +- void (*host_init)(struct pcie_port *pp); ++ int (*host_init)(struct pcie_port *pp); + void (*msi_set_irq)(struct pcie_port *pp, int irq); + void (*msi_clear_irq)(struct pcie_port *pp, int irq); + phys_addr_t (*get_msi_addr)(struct pcie_port *pp); +--- a/drivers/pci/host/pcie-qcom.c ++++ b/drivers/pci/host/pcie-qcom.c +@@ -515,7 +515,7 @@ static int qcom_pcie_link_up(struct pcie + return !!(val & PCI_EXP_LNKSTA_DLLLA); + } + +-static void qcom_pcie_host_init(struct pcie_port *pp) ++static int qcom_pcie_host_init(struct pcie_port *pp) + { + struct qcom_pcie *pcie = to_qcom_pcie(pp); + int ret; +@@ -541,12 +541,13 @@ static void qcom_pcie_host_init(struct p + if (ret) + goto err; + +- return; ++ return 0; + err: + qcom_ep_reset_assert(pcie); + phy_power_off(pcie->phy); + err_deinit: + pcie->ops->deinit(pcie); ++ return ret; + } + + static int qcom_pcie_rd_own_conf(struct pcie_port *pp, int where, int size, diff --git a/target/linux/ipq806x/patches-4.9/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch b/target/linux/ipq806x/patches-4.9/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch new file mode 100644 index 0000000000..98e2b54e39 --- /dev/null +++ b/target/linux/ipq806x/patches-4.9/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch @@ -0,0 +1,113 @@ +From d27c303e828d7e42f339a459d2abfe30c51698e9 Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan <smuthayy@codeaurora.org> +Date: Tue, 26 Jul 2016 12:28:31 +0530 +Subject: PCI: qcom: Programming the PCIE iATU for IPQ806x + +Resolved PCIE EP detection errors caused due to missing iATU programming. + +Change-Id: Ie95c0f8cb940abc0192a8a3c4e825ddba54b72fe +Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> +--- + drivers/pci/host/pcie-qcom.c | 77 ++++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 77 insertions(+) + +--- a/drivers/pci/host/pcie-qcom.c ++++ b/drivers/pci/host/pcie-qcom.c +@@ -52,6 +52,29 @@ + #define PCIE20_ELBI_SYS_CTRL_LT_ENABLE BIT(0) + + #define PCIE20_CAP 0x70 ++#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10) ++ ++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818 ++#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c ++ ++#define PCIE20_PLR_IATU_VIEWPORT 0x900 ++#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31) ++#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0) ++ ++#define PCIE20_PLR_IATU_CTRL1 0x904 ++#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0) ++#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0) ++ ++#define PCIE20_PLR_IATU_CTRL2 0x908 ++#define PCIE20_PLR_IATU_ENABLE BIT(31) ++ ++#define PCIE20_PLR_IATU_LBAR 0x90C ++#define PCIE20_PLR_IATU_UBAR 0x910 ++#define PCIE20_PLR_IATU_LAR 0x914 ++#define PCIE20_PLR_IATU_LTAR 0x918 ++#define PCIE20_PLR_IATU_UTAR 0x91c ++ ++#define MSM_PCIE_DEV_CFG_ADDR 0x01000000 + + #define PERST_DELAY_US 1000 + /* PARF registers */ +@@ -163,6 +186,57 @@ static int qcom_pcie_establish_link(stru + return dw_pcie_wait_for_link(&pcie->pp); + } + ++static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev) ++{ ++ struct pcie_port *pp = &pcie->pp; ++ ++ /* ++ * program and enable address translation region 0 (device config ++ * address space); region type config; ++ * axi config address range to device config address range ++ */ ++ writel(PCIE20_PLR_IATU_REGION_OUTBOUND | ++ PCIE20_PLR_IATU_REGION_INDEX(0), ++ pcie->pp.dbi_base + PCIE20_PLR_IATU_VIEWPORT); ++ ++ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL1); ++ writel(PCIE20_PLR_IATU_ENABLE, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL2); ++ writel(pp->cfg0_base, pcie->pp.dbi_base + PCIE20_PLR_IATU_LBAR); ++ writel((pp->cfg0_base >> 32), pcie->pp.dbi_base + PCIE20_PLR_IATU_UBAR); ++ writel((pp->cfg0_base + pp->cfg0_size - 1), ++ pcie->pp.dbi_base + PCIE20_PLR_IATU_LAR); ++ writel(busdev, pcie->pp.dbi_base + PCIE20_PLR_IATU_LTAR); ++ writel(0, pcie->pp.dbi_base + PCIE20_PLR_IATU_UTAR); ++} ++ ++static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie) ++{ ++ struct pcie_port *pp = &pcie->pp; ++ ++ /* ++ * program and enable address translation region 2 (device resource ++ * address space); region type memory; ++ * axi device bar address range to device bar address range ++ */ ++ writel(PCIE20_PLR_IATU_REGION_OUTBOUND | ++ PCIE20_PLR_IATU_REGION_INDEX(2), ++ pcie->pp.dbi_base + PCIE20_PLR_IATU_VIEWPORT); ++ ++ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL1); ++ writel(PCIE20_PLR_IATU_ENABLE, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL2); ++ writel(pp->mem_base, pcie->pp.dbi_base + PCIE20_PLR_IATU_LBAR); ++ writel((pp->mem_base >> 32), pcie->pp.dbi_base + PCIE20_PLR_IATU_UBAR); ++ writel(pp->mem_base + pp->mem_size - 1, ++ pcie->pp.dbi_base + PCIE20_PLR_IATU_LAR); ++ writel(pp->mem_bus_addr, pcie->pp.dbi_base + PCIE20_PLR_IATU_LTAR); ++ writel(upper_32_bits(pp->mem_bus_addr), ++ pcie->pp.dbi_base + PCIE20_PLR_IATU_UTAR); ++ ++ /* 256B PCIE buffer setting */ ++ writel(0x1, pcie->pp.dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0); ++ writel(0x1, pcie->pp.dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1); ++} ++ + static int qcom_pcie_get_resources_v0(struct qcom_pcie *pcie) + { + struct qcom_pcie_resources_v0 *res = &pcie->res.v0; +@@ -404,6 +478,9 @@ static int qcom_pcie_init_v0(struct qcom + /* wait for clock acquisition */ + usleep_range(1000, 1500); + ++ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR); ++ qcom_pcie_prog_viewport_mem2_outbound(pcie); ++ + return 0; + + err_deassert_ahb: diff --git a/target/linux/ipq806x/patches-4.9/0071-6-PCI-qcom-Force-GEN1-support.patch b/target/linux/ipq806x/patches-4.9/0071-6-PCI-qcom-Force-GEN1-support.patch new file mode 100644 index 0000000000..91891a5b21 --- /dev/null +++ b/target/linux/ipq806x/patches-4.9/0071-6-PCI-qcom-Force-GEN1-support.patch @@ -0,0 +1,61 @@ +From 4910cfd150342ec7b038892262923c725a9c4001 Mon Sep 17 00:00:00 2001 +From: Sham Muthayyan <smuthayy@codeaurora.org> +Date: Wed, 7 Sep 2016 16:44:28 +0530 +Subject: PCI: qcom: Force GEN1 support + +Change-Id: Ica54ddb737d7b851469deab1745f54bf431bd3f0 +Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> +--- + drivers/pci/host/pcie-qcom.c | 13 +++++++++++++ + 1 file changed, 13 insertions(+) + +--- a/drivers/pci/host/pcie-qcom.c ++++ b/drivers/pci/host/pcie-qcom.c +@@ -90,6 +90,8 @@ + #define PCIE20_PARF_CONFIG_BITS 0x50 + #define PHY_RX0_EQ(x) (x << 24) + ++#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0 ++ + struct qcom_pcie_resources_v0 { + struct clk *iface_clk; + struct clk *core_clk; +@@ -138,6 +140,7 @@ struct qcom_pcie { + struct phy *phy; + struct gpio_desc *reset; + struct qcom_pcie_ops *ops; ++ uint32_t force_gen1; + }; + + #define to_qcom_pcie(x) container_of(x, struct qcom_pcie, pp) +@@ -477,6 +480,11 @@ static int qcom_pcie_init_v0(struct qcom + + /* wait for clock acquisition */ + usleep_range(1000, 1500); ++ if (pcie->force_gen1) { ++ writel_relaxed((readl_relaxed( ++ pcie->pp.dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2) | 1), ++ pcie->pp.dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2); ++ } + + qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR); + qcom_pcie_prog_viewport_mem2_outbound(pcie); +@@ -666,6 +674,8 @@ static int qcom_pcie_probe(struct platfo + struct qcom_pcie *pcie; + struct pcie_port *pp; + int ret; ++ uint32_t force_gen1 = 0; ++ struct device_node *np = pdev->dev.of_node; + + pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); + if (!pcie) +@@ -678,6 +688,9 @@ static int qcom_pcie_probe(struct platfo + if (IS_ERR(pcie->reset)) + return PTR_ERR(pcie->reset); + ++ of_property_read_u32(np, "force_gen1", &force_gen1); ++ pcie->force_gen1 = force_gen1; ++ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf"); + pcie->parf = devm_ioremap_resource(dev, res); + if (IS_ERR(pcie->parf)) diff --git a/target/linux/ipq806x/patches-4.9/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch b/target/linux/ipq806x/patches-4.9/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch new file mode 100644 index 0000000000..157386458e --- /dev/null +++ b/target/linux/ipq806x/patches-4.9/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch @@ -0,0 +1,69 @@ +From edff8f777c6321ca89bb950a382f409c4a126e28 Mon Sep 17 00:00:00 2001 +From: Gokul Sriram Palanisamy <gpalan@codeaurora.org> +Date: Thu, 15 Dec 2016 17:38:18 +0530 +Subject: pcie: Set PCIE MRRS and MPS to 256B + +Set Max Read Request Size and Max Payload Size to 256 bytes, +per chip team recommendation. + +Change-Id: I097004be2ced1b3096ffc10c318aae0b2bb155e8 +Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org> +--- + drivers/pci/host/pcie-qcom.c | 37 +++++++++++++++++++++++++++++++++++++ + 1 file changed, 37 insertions(+) + +(limited to 'drivers/pci/host/pcie-qcom.c') + +--- a/drivers/pci/host/pcie-qcom.c ++++ b/drivers/pci/host/pcie-qcom.c +@@ -92,6 +92,14 @@ + + #define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0 + ++#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b)) ++#define __mask(a, b) (((1 << ((a) + 1)) - 1) & ~((1 << (b)) - 1)) ++#define PCIE20_DEV_CAS 0x78 ++#define PCIE20_MRRS_MASK __mask(14, 12) ++#define PCIE20_MRRS(x) __set(x, 14, 12) ++#define PCIE20_MPS_MASK __mask(7, 5) ++#define PCIE20_MPS(x) __set(x, 7, 5) ++ + struct qcom_pcie_resources_v0 { + struct clk *iface_clk; + struct clk *core_clk; +@@ -745,6 +753,35 @@ static int qcom_pcie_probe(struct platfo + return 0; + } + ++static void qcom_pcie_fixup_final(struct pci_dev *dev) ++{ ++ int cap, err; ++ u16 ctl, reg_val; ++ ++ cap = pci_pcie_cap(dev); ++ if (!cap) ++ return; ++ ++ err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl); ++ ++ if (err) ++ return; ++ ++ reg_val = ctl; ++ ++ if (((reg_val & PCIE20_MRRS_MASK) >> 12) > 1) ++ reg_val = (reg_val & ~(PCIE20_MRRS_MASK)) | PCIE20_MRRS(0x1); ++ ++ if (((ctl & PCIE20_MPS_MASK) >> 5) > 1) ++ reg_val = (reg_val & ~(PCIE20_MPS_MASK)) | PCIE20_MPS(0x1); ++ ++ err = pci_write_config_word(dev, cap + PCI_EXP_DEVCTL, reg_val); ++ ++ if (err) ++ pr_err("pcie config write failed %d\n", err); ++} ++DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, qcom_pcie_fixup_final); ++ + static const struct of_device_id qcom_pcie_match[] = { + { .compatible = "qcom,pcie-ipq8064", .data = &ops_v0 }, + { .compatible = "qcom,pcie-apq8064", .data = &ops_v0 }, diff --git a/target/linux/ipq806x/patches-4.9/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch b/target/linux/ipq806x/patches-4.9/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch new file mode 100644 index 0000000000..0f5050826c --- /dev/null +++ b/target/linux/ipq806x/patches-4.9/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch @@ -0,0 +1,91 @@ +From b74bab6186131eea09459eedf5d737645a3559c9 Mon Sep 17 00:00:00 2001 +From: Abhishek Sahu <absahu@codeaurora.org> +Date: Thu, 22 Dec 2016 11:18:45 +0530 +Subject: pcie: qcom: Fixed pcie_phy_clk branch issue + +Following backtraces are observed in PCIe deinit operation. + + Hardware name: Qualcomm (Flattened Device Tree) + (unwind_backtrace) from [] (show_stack+0x10/0x14) + (show_stack) from [] (dump_stack+0x84/0x98) + (dump_stack) from [] (warn_slowpath_common+0x9c/0xb8) + (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40) + (warn_slowpath_fmt) from [] (clk_branch_wait+0x114/0x120) + (clk_branch_wait) from [] (clk_core_disable+0xd0/0x1f4) + (clk_core_disable) from [] (clk_disable+0x24/0x30) + (clk_disable) from [] (qcom_pcie_deinit_v0+0x6c/0xb8) + (qcom_pcie_deinit_v0) from [] (qcom_pcie_host_init+0xe0/0xe8) + (qcom_pcie_host_init) from [] (dw_pcie_host_init+0x3b0/0x538) + (dw_pcie_host_init) from [] (qcom_pcie_probe+0x20c/0x2e4) + +pcie_phy_clk is generated for PCIe controller itself and the +GCC controls its branch operation. This error is coming since +the assert operations turn off the parent clock before branch +clock. Now this patch moves clk_disable_unprepare before assert +operations. + +Similarly, during probe function, the clock branch operation +should be done after dessert operation. Currently, it does not +generate any error since bootloader enables the pcie_phy_clk +but the same error is coming during probe, if bootloader +disables pcie_phy_clk. + +Change-Id: Ib29c154d10eb64363d9cc982ce5fd8107af5627d +Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> +--- + drivers/pci/host/pcie-qcom.c | 16 +++++++--------- + 1 file changed, 7 insertions(+), 9 deletions(-) + +--- a/drivers/pci/host/pcie-qcom.c ++++ b/drivers/pci/host/pcie-qcom.c +@@ -352,6 +352,7 @@ static void qcom_pcie_deinit_v0(struct q + { + struct qcom_pcie_resources_v0 *res = &pcie->res.v0; + ++ clk_disable_unprepare(res->phy_clk); + reset_control_assert(res->pci_reset); + reset_control_assert(res->axi_reset); + reset_control_assert(res->ahb_reset); +@@ -360,7 +361,6 @@ static void qcom_pcie_deinit_v0(struct q + reset_control_assert(res->ext_reset); + clk_disable_unprepare(res->iface_clk); + clk_disable_unprepare(res->core_clk); +- clk_disable_unprepare(res->phy_clk); + clk_disable_unprepare(res->aux_clk); + clk_disable_unprepare(res->ref_clk); + regulator_disable(res->vdda); +@@ -416,12 +416,6 @@ static int qcom_pcie_init_v0(struct qcom + goto err_clk_core; + } + +- ret = clk_prepare_enable(res->phy_clk); +- if (ret) { +- dev_err(dev, "cannot prepare/enable phy clock\n"); +- goto err_clk_phy; +- } +- + ret = clk_prepare_enable(res->aux_clk); + if (ret) { + dev_err(dev, "cannot prepare/enable aux clock\n"); +@@ -486,6 +480,12 @@ static int qcom_pcie_init_v0(struct qcom + return ret; + } + ++ ret = clk_prepare_enable(res->phy_clk); ++ if (ret) { ++ dev_err(dev, "cannot prepare/enable phy clock\n"); ++ goto err_deassert_ahb; ++ } ++ + /* wait for clock acquisition */ + usleep_range(1000, 1500); + if (pcie->force_gen1) { +@@ -504,8 +504,6 @@ err_deassert_ahb: + err_clk_ref: + clk_disable_unprepare(res->aux_clk); + err_clk_aux: +- clk_disable_unprepare(res->phy_clk); +-err_clk_phy: + clk_disable_unprepare(res->core_clk); + err_clk_core: + clk_disable_unprepare(res->iface_clk); diff --git a/target/linux/ipq806x/patches-4.9/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch b/target/linux/ipq806x/patches-4.9/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch new file mode 100644 index 0000000000..a60add93c7 --- /dev/null +++ b/target/linux/ipq806x/patches-4.9/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch @@ -0,0 +1,25 @@ +From 1a9c48123bd09f75562b6a2ee0f0a7b2d533cd45 Mon Sep 17 00:00:00 2001 +From: Abhishek Sahu <absahu@codeaurora.org> +Date: Thu, 22 Dec 2016 11:50:49 +0530 +Subject: pcie: qcom: change duplicate pci reset to phy reset + +The deinit issues reset_control_assert for pci twice and +does not contain phy reset. + +Change-Id: Iba849963c7e5f9a2a1063f0e2e89635df70b8a99 +Signed-off-by: Abhishek Sahu <absahu@codeaurora.org> +--- + drivers/pci/host/pcie-qcom.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/pci/host/pcie-qcom.c ++++ b/drivers/pci/host/pcie-qcom.c +@@ -353,7 +353,7 @@ static void qcom_pcie_deinit_v0(struct q + struct qcom_pcie_resources_v0 *res = &pcie->res.v0; + + clk_disable_unprepare(res->phy_clk); +- reset_control_assert(res->pci_reset); ++ reset_control_assert(res->phy_reset); + reset_control_assert(res->axi_reset); + reset_control_assert(res->ahb_reset); + reset_control_assert(res->por_reset); diff --git a/target/linux/ipq806x/patches-4.9/0071-pcie-qcom-fixes.patch b/target/linux/ipq806x/patches-4.9/0071-pcie-qcom-fixes.patch deleted file mode 100644 index dd403e2957..0000000000 --- a/target/linux/ipq806x/patches-4.9/0071-pcie-qcom-fixes.patch +++ /dev/null @@ -1,308 +0,0 @@ ---- a/drivers/pci/host/pcie-qcom.c -+++ b/drivers/pci/host/pcie-qcom.c -@@ -36,8 +36,50 @@ - - #include "pcie-designware.h" - -+/* DBI registers */ -+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818 -+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c -+ -+#define PCIE20_PLR_IATU_VIEWPORT 0x900 -+#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31) -+#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0) -+ -+#define PCIE20_PLR_IATU_CTRL1 0x904 -+#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0) -+#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0) -+ -+#define PCIE20_PLR_IATU_CTRL2 0x908 -+#define PCIE20_PLR_IATU_ENABLE BIT(31) -+ -+#define PCIE20_PLR_IATU_LBAR 0x90C -+#define PCIE20_PLR_IATU_UBAR 0x910 -+#define PCIE20_PLR_IATU_LAR 0x914 -+#define PCIE20_PLR_IATU_LTAR 0x918 -+#define PCIE20_PLR_IATU_UTAR 0x91c -+ -+#define MSM_PCIE_DEV_CFG_ADDR 0x01000000 -+ -+/* PARF registers */ -+#define PCIE20_PARF_PCS_DEEMPH 0x34 -+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16) -+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8) -+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0) -+ -+#define PCIE20_PARF_PCS_SWING 0x38 -+#define PCS_SWING_TX_SWING_FULL(x) (x << 8) -+#define PCS_SWING_TX_SWING_LOW(x) (x << 0) -+ - #define PCIE20_PARF_PHY_CTRL 0x40 -+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16) -+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16) -+ - #define PCIE20_PARF_PHY_REFCLK 0x4C -+#define REF_SSP_EN BIT(16) -+#define REF_USE_PAD BIT(12) -+ -+#define PCIE20_PARF_CONFIG_BITS 0x50 -+#define PHY_RX0_EQ(x) (x << 24) -+ - #define PCIE20_PARF_DBI_BASE_ADDR 0x168 - #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16c - #define PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT 0x178 -@@ -53,14 +95,18 @@ struct qcom_pcie_resources_v0 { - struct clk *iface_clk; - struct clk *core_clk; - struct clk *phy_clk; -+ struct clk *aux_clk; -+ struct clk *ref_clk; - struct reset_control *pci_reset; - struct reset_control *axi_reset; - struct reset_control *ahb_reset; - struct reset_control *por_reset; - struct reset_control *phy_reset; -+ struct reset_control *ext_reset; - struct regulator *vdda; - struct regulator *vdda_phy; - struct regulator *vdda_refclk; -+ uint8_t phy_tx0_term_offset; - }; - - struct qcom_pcie_resources_v1 { -@@ -82,6 +128,7 @@ struct qcom_pcie; - struct qcom_pcie_ops { - int (*get_resources)(struct qcom_pcie *pcie); - int (*init)(struct qcom_pcie *pcie); -+ void (*configure)(struct qcom_pcie *pcie); - void (*deinit)(struct qcom_pcie *pcie); - }; - -@@ -160,6 +207,14 @@ static int qcom_pcie_get_resources_v0(st - if (IS_ERR(res->phy_clk)) - return PTR_ERR(res->phy_clk); - -+ res->aux_clk = devm_clk_get(dev, "aux"); -+ if (IS_ERR(res->aux_clk)) -+ return PTR_ERR(res->aux_clk); -+ -+ res->ref_clk = devm_clk_get(dev, "ref"); -+ if (IS_ERR(res->ref_clk)) -+ return PTR_ERR(res->ref_clk); -+ - res->pci_reset = devm_reset_control_get(dev, "pci"); - if (IS_ERR(res->pci_reset)) - return PTR_ERR(res->pci_reset); -@@ -180,6 +235,14 @@ static int qcom_pcie_get_resources_v0(st - if (IS_ERR(res->phy_reset)) - return PTR_ERR(res->phy_reset); - -+ res->ext_reset = devm_reset_control_get(dev, "ext"); -+ if (IS_ERR(res->ext_reset)) -+ return PTR_ERR(res->ext_reset); -+ -+ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset", -+ &res->phy_tx0_term_offset)) -+ res->phy_tx0_term_offset = 0; -+ - return 0; - } - -@@ -223,15 +286,69 @@ static void qcom_pcie_deinit_v0(struct q - reset_control_assert(res->axi_reset); - reset_control_assert(res->ahb_reset); - reset_control_assert(res->por_reset); -- reset_control_assert(res->pci_reset); -+ reset_control_assert(res->phy_reset); -+ reset_control_assert(res->ext_reset); - clk_disable_unprepare(res->iface_clk); - clk_disable_unprepare(res->core_clk); - clk_disable_unprepare(res->phy_clk); -+ clk_disable_unprepare(res->aux_clk); -+ clk_disable_unprepare(res->ref_clk); - regulator_disable(res->vdda); - regulator_disable(res->vdda_phy); - regulator_disable(res->vdda_refclk); - } - -+static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev) -+{ -+ struct pcie_port *pp = &pcie->pp; -+ -+ /* -+ * program and enable address translation region 0 (device config -+ * address space); region type config; -+ * axi config address range to device config address range -+ */ -+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND | -+ PCIE20_PLR_IATU_REGION_INDEX(0), -+ pcie->pp.dbi_base + PCIE20_PLR_IATU_VIEWPORT); -+ -+ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL1); -+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL2); -+ writel(pp->cfg0_base, pcie->pp.dbi_base + PCIE20_PLR_IATU_LBAR); -+ writel((pp->cfg0_base >> 32), pcie->pp.dbi_base + PCIE20_PLR_IATU_UBAR); -+ writel((pp->cfg0_base + pp->cfg0_size - 1), -+ pcie->pp.dbi_base + PCIE20_PLR_IATU_LAR); -+ writel(busdev, pcie->pp.dbi_base + PCIE20_PLR_IATU_LTAR); -+ writel(0, pcie->pp.dbi_base + PCIE20_PLR_IATU_UTAR); -+} -+ -+static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie) -+{ -+ struct pcie_port *pp = &pcie->pp; -+ -+ /* -+ * program and enable address translation region 2 (device resource -+ * address space); region type memory; -+ * axi device bar address range to device bar address range -+ */ -+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND | -+ PCIE20_PLR_IATU_REGION_INDEX(2), -+ pcie->pp.dbi_base + PCIE20_PLR_IATU_VIEWPORT); -+ -+ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL1); -+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pp.dbi_base + PCIE20_PLR_IATU_CTRL2); -+ writel(pp->mem_base, pcie->pp.dbi_base + PCIE20_PLR_IATU_LBAR); -+ writel((pp->mem_base >> 32), pcie->pp.dbi_base + PCIE20_PLR_IATU_UBAR); -+ writel(pp->mem_base + pp->mem_size - 1, -+ pcie->pp.dbi_base + PCIE20_PLR_IATU_LAR); -+ writel(pp->mem_bus_addr, pcie->pp.dbi_base + PCIE20_PLR_IATU_LTAR); -+ writel(upper_32_bits(pp->mem_bus_addr), -+ pcie->pp.dbi_base + PCIE20_PLR_IATU_UTAR); -+ -+ /* 256B PCIE buffer setting */ -+ writel(0x1, pcie->pp.dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0); -+ writel(0x1, pcie->pp.dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1); -+} -+ - static int qcom_pcie_init_v0(struct qcom_pcie *pcie) - { - struct qcom_pcie_resources_v0 *res = &pcie->res.v0; -@@ -260,13 +377,19 @@ static int qcom_pcie_init_v0(struct qcom - ret = reset_control_assert(res->ahb_reset); - if (ret) { - dev_err(dev, "cannot assert ahb reset\n"); -- goto err_assert_ahb; -+ goto err_assert_reset; -+ } -+ -+ ret = reset_control_deassert(res->ext_reset); -+ if (ret) { -+ dev_err(dev, "cannot deassert ext reset\n"); -+ goto err_assert_reset; - } - - ret = clk_prepare_enable(res->iface_clk); - if (ret) { - dev_err(dev, "cannot prepare/enable iface clock\n"); -- goto err_assert_ahb; -+ goto err_assert_reset; - } - - ret = clk_prepare_enable(res->phy_clk); -@@ -281,22 +404,53 @@ static int qcom_pcie_init_v0(struct qcom - goto err_clk_core; - } - -+ ret = clk_prepare_enable(res->aux_clk); -+ if (ret) { -+ dev_err(dev, "cannot prepare/enable aux clock\n"); -+ goto err_clk_aux; -+ } -+ -+ ret = clk_prepare_enable(res->ref_clk); -+ if (ret) { -+ dev_err(dev, "cannot prepare/enable ref clock\n"); -+ goto err_clk_ref; -+ } -+ - ret = reset_control_deassert(res->ahb_reset); - if (ret) { - dev_err(dev, "cannot deassert ahb reset\n"); - goto err_deassert_ahb; - } -+ udelay(1); - - /* enable PCIe clocks and resets */ - val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); - val &= ~BIT(0); - writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); - -- /* enable external reference clock */ -+ /* Set Tx termination offset */ -+ val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL); -+ val &= ~PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK; -+ val |= PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset); -+ writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL); -+ -+ /* PARF programming */ -+ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) | -+ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) | -+ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22), -+ pcie->parf + PCIE20_PARF_PCS_DEEMPH); -+ writel(PCS_SWING_TX_SWING_FULL(0x78) | -+ PCS_SWING_TX_SWING_LOW(0x78), -+ pcie->parf + PCIE20_PARF_PCS_SWING); -+ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS); -+ -+ /* Enable reference clock */ - val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK); -- val |= BIT(16); -+ val &= ~REF_USE_PAD; -+ val |= REF_SSP_EN; - writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK); - -+ /* De-assert PHY, PCIe, POR and AXI resets */ - ret = reset_control_deassert(res->phy_reset); - if (ret) { - dev_err(dev, "cannot deassert phy reset\n"); -@@ -327,12 +481,16 @@ static int qcom_pcie_init_v0(struct qcom - return 0; - - err_deassert_ahb: -+ clk_disable_unprepare(res->ref_clk); -+err_clk_ref: -+ clk_disable_unprepare(res->aux_clk); -+err_clk_aux: - clk_disable_unprepare(res->core_clk); - err_clk_core: - clk_disable_unprepare(res->phy_clk); - err_clk_phy: - clk_disable_unprepare(res->iface_clk); --err_assert_ahb: -+err_assert_reset: - regulator_disable(res->vdda_phy); - err_vdda_phy: - regulator_disable(res->vdda_refclk); -@@ -342,6 +500,12 @@ err_refclk: - return ret; - } - -+static void qcom_pcie_configure_v0(struct qcom_pcie *pcie) -+{ -+ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR); -+ qcom_pcie_prog_viewport_mem2_outbound(pcie); -+} -+ - static void qcom_pcie_deinit_v1(struct qcom_pcie *pcie) - { - struct qcom_pcie_resources_v1 *res = &pcie->res.v1; -@@ -455,6 +619,9 @@ static void qcom_pcie_host_init(struct p - if (ret) - goto err; - -+ if (pcie->ops->init) -+ pcie->ops->init(pcie); -+ - return; - err: - qcom_ep_reset_assert(pcie); -@@ -486,6 +653,7 @@ static struct pcie_host_ops qcom_pcie_dw - static const struct qcom_pcie_ops ops_v0 = { - .get_resources = qcom_pcie_get_resources_v0, - .init = qcom_pcie_init_v0, -+ .configure = qcom_pcie_configure_v0, - .deinit = qcom_pcie_deinit_v0, - }; - |