diff options
Diffstat (limited to 'target/linux')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 6 | ||||
| -rw-r--r-- | target/linux/ramips/base-files/etc/diag.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 | ||||
| -rw-r--r-- | target/linux/ramips/dts/WZR-AGL300NH.dts | 135 | ||||
| -rw-r--r-- | target/linux/ramips/image/Makefile | 3 |
5 files changed, 148 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index f298aa47af..7e9d8c984b 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -242,6 +242,12 @@ ramips_setup_interfaces() ucidef_add_switch_vlan "switch1" "2" "4 6t" ;; + wzr-agl300nh) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t" + ucidef_add_switch_vlan "switch0" "2" "0 5t" + ;; *) RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"` if [ -n "${RT3X5X}" ]; then diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index d31fbe4f98..39a0868727 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -168,6 +168,9 @@ get_status_led() { wli-tx4-ag300n) status_led="buffalo:blue:power" ;; + wzr-agl300nh) + status_led="buffalo:green:router" + ;; wl-351) status_led="wl-351:amber:power" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 356a0856c9..fffbe72cb8 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -100,6 +100,7 @@ platform_check_image() { wl-351 | \ wl341v3 | \ wli-tx4-ag300n | \ + wzr-agl300nh | \ wmr300 |\ wnce2001 | \ wr512-3gn |\ diff --git a/target/linux/ramips/dts/WZR-AGL300NH.dts b/target/linux/ramips/dts/WZR-AGL300NH.dts new file mode 100644 index 0000000000..8e18e90be2 --- /dev/null +++ b/target/linux/ramips/dts/WZR-AGL300NH.dts @@ -0,0 +1,135 @@ +/dts-v1/; + +/include/ "rt2880.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "WZR-AGL300NH", "ralink,rt2880-soc"; + model = "Buffalo WZR-AGL300NH"; + + palmbus@300000 { + gpio0: gpio@600 { + status = "okay"; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "uartlite", "mdio"; + ralink,function = "gpio"; + }; + }; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + ethernet@400000 { + status = "okay"; + mtd-mac-address = <&factory 0x4>; + + port@0 { + ralink,fixed-link = <1000 1 1 1>; + }; + + mdio-bus { + status = "okay"; + phy0: ethernet-phy@0 { + phy-mode = "mii"; + reg = <0>; + }; + }; + }; + + rtl8366s { + compatible = "realtek,rtl8366s"; + gpio-sda = <&gpio0 1 0>; + gpio-sck = <&gpio0 2 0>; + }; + + wmac@480000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + wps { + label = "wps"; + gpios = <&gpio0 0 1>; + linux,code = <0x211>; + }; + router { + label = "router_switch"; + gpios = <&gpio0 7 0>; + linux,code = <0x100>; + }; + reset { + label = "reset"; + gpios = <&gpio0 9 1>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + router { + label = "buffalo:green:router"; + gpios = <&gpio0 8 1>; + }; + diag { + label = "buffalo:red:diag"; + gpios = <&gpio0 12 1>; + }; + security_g { + label = "buffalo:orange:security_g"; + gpios = <&gpio0 11 1>; + }; + security_n { + label = "buffalo:orange:security_n"; + gpios = <&gpio0 13 1>; + }; + }; + + + pcibus0: pci@00440000 { + compatible = "ralink,rt288x-pci"; + reg = <0x00440000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + + status = "ok"; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 73637300fd..6e6b10bd46 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -395,6 +395,8 @@ Image/Build/Profile/V11STFE=$(call BuildFirmware/Default4M/$(1),$(1),v11st-fe,V1 Image/Build/Profile/WLITX4AG300N=$(call BuildFirmware/Default4M/$(1),$(1),wli-tx4-ag300n,WLI-TX4-AG300N) +Image/Build/Profile/WZRAGL300NH=$(call BuildFirmware/Default4M/$(1),$(1),wzr-agl300nh,WZR-AGL300NH) + ifeq ($(SUBTARGET),rt288x) define Image/Build/Profile/Default $(call Image/Build/Profile/AR670W,$(1)) @@ -403,6 +405,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/RTN15,$(1)) $(call Image/Build/Profile/V11STFE,$(1)) $(call Image/Build/Profile/WLITX4AG300N,$(1)) + $(call Image/Build/Profile/WZRAGL300NH,$(1)) endef endif |