diff options
Diffstat (limited to 'target/linux')
22 files changed, 170 insertions, 266 deletions
diff --git a/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch index b2abe10620..a57de6c475 100644 --- a/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch +++ b/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch @@ -15,59 +15,59 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -35,6 +35,24 @@ - bias-disable; - }; - -+ pcie0_pins: pcie0_pinmux { -+ mux { -+ pins = "gpio3"; -+ function = "pcie1_rst"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ -+ pcie1_pins: pcie1_pinmux { -+ mux { -+ pins = "gpio48"; -+ function = "pcie2_rst"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; -@@ -115,5 +133,21 @@ +@@ -115,5 +115,15 @@ usb30@1 { status = "ok"; }; + + pcie0: pci@1b500000 { + status = "ok"; -+ reset-gpio = <&qcom_pinmux 3 0>; -+ pinctrl-0 = <&pcie0_pins>; -+ pinctrl-names = "default"; + phy-tx0-term-offset = <7>; + }; + + pcie1: pci@1b700000 { + status = "ok"; -+ reset-gpio = <&qcom_pinmux 48 0>; -+ pinctrl-0 = <&pcie1_pins>; -+ pinctrl-names = "default"; + phy-tx0-term-offset = <7>; + }; }; }; --- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts -@@ -30,6 +30,33 @@ - bias-disable; - }; +@@ -128,5 +128,17 @@ + usb30@1 { + status = "ok"; + }; ++ ++ pcie0: pci@1b500000 { ++ status = "ok"; ++ }; ++ ++ pcie1: pci@1b700000 { ++ status = "ok"; ++ }; ++ ++ pcie2: pci@1b900000 { ++ status = "ok"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -3,6 +3,9 @@ + #include "skeleton.dtsi" + #include <dt-bindings/clock/qcom,gcc-ipq806x.h> + #include <dt-bindings/soc/qcom,gsbi.h> ++#include <dt-bindings/reset/qcom,gcc-ipq806x.h> ++#include <dt-bindings/interrupt-controller/arm-gic.h> ++#include <dt-bindings/gpio/gpio.h> + / { + model = "Qualcomm IPQ8064"; +@@ -83,6 +86,33 @@ + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 32 0x4>; ++ + pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; @@ -94,49 +94,10 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + bias-disable; + }; + }; -+ - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; -@@ -128,5 +155,26 @@ - usb30@1 { - status = "ok"; }; -+ -+ pcie0: pci@1b500000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 3 0>; -+ pinctrl-0 = <&pcie0_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie1: pci@1b700000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 48 0>; -+ pinctrl-0 = <&pcie1_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie2: pci@1b900000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 63 0>; -+ pinctrl-0 = <&pcie2_pins>; -+ pinctrl-names = "default"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -3,6 +3,8 @@ - #include "skeleton.dtsi" - #include <dt-bindings/clock/qcom,gcc-ipq806x.h> - #include <dt-bindings/soc/qcom,gsbi.h> -+#include <dt-bindings/reset/qcom,gcc-ipq806x.h> -+#include <dt-bindings/interrupt-controller/arm-gic.h> - / { - model = "Qualcomm IPQ8064"; -@@ -311,6 +313,129 @@ + intc: interrupt-controller@2000000 { +@@ -311,6 +341,144 @@ reg = <0x01200600 0x100>; }; @@ -178,6 +139,11 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + <&gcc PCIE_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + ++ pinctrl-0 = <&pcie0_pins>; ++ pinctrl-names = "default"; ++ ++ perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; ++ + status = "disabled"; + }; + @@ -219,6 +185,11 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + <&gcc PCIE_1_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + ++ pinctrl-0 = <&pcie1_pins>; ++ pinctrl-names = "default"; ++ ++ perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; ++ + status = "disabled"; + }; + @@ -260,6 +231,11 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + <&gcc PCIE_2_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + ++ pinctrl-0 = <&pcie2_pins>; ++ pinctrl-names = "default"; ++ ++ perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; ++ + status = "disabled"; + }; + diff --git a/target/linux/ipq806x/patches-3.18/115-add-pcie-aux-clk-dts.patch b/target/linux/ipq806x/patches-3.18/115-add-pcie-aux-clk-dts.patch index 83c5f55247..9f32e8fbc2 100644 --- a/target/linux/ipq806x/patches-3.18/115-add-pcie-aux-clk-dts.patch +++ b/target/linux/ipq806x/patches-3.18/115-add-pcie-aux-clk-dts.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -341,15 +341,21 @@ +@@ -369,15 +369,21 @@ clocks = <&gcc PCIE_A_CLK>, <&gcc PCIE_H_CLK>, @@ -24,9 +24,9 @@ + <&gcc PCIE_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; - status = "disabled"; - }; -@@ -382,15 +388,21 @@ + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; +@@ -415,15 +421,21 @@ clocks = <&gcc PCIE_1_A_CLK>, <&gcc PCIE_1_H_CLK>, @@ -50,9 +50,9 @@ + <&gcc PCIE_1_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; - status = "disabled"; - }; -@@ -423,15 +435,21 @@ + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; +@@ -461,15 +473,21 @@ clocks = <&gcc PCIE_2_A_CLK>, <&gcc PCIE_2_H_CLK>, @@ -76,5 +76,5 @@ + <&gcc PCIE_2_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; - status = "disabled"; - }; + pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; diff --git a/target/linux/ipq806x/patches-3.18/126-add-rpm-to-ipq8064-dts.patch b/target/linux/ipq806x/patches-3.18/126-add-rpm-to-ipq8064-dts.patch index 7e4c5cb1f6..a40738edb1 100644 --- a/target/linux/ipq806x/patches-3.18/126-add-rpm-to-ipq8064-dts.patch +++ b/target/linux/ipq806x/patches-3.18/126-add-rpm-to-ipq8064-dts.patch @@ -8,7 +8,7 @@ #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/reset/qcom,gcc-ipq806x.h> #include <dt-bindings/interrupt-controller/arm-gic.h> -@@ -76,6 +77,63 @@ +@@ -77,6 +78,63 @@ ranges; compatible = "simple-bus"; @@ -72,7 +72,7 @@ qcom_pinmux: pinmux@800000 { compatible = "qcom,ipq8064-pinctrl"; reg = <0x800000 0x4000>; -@@ -120,6 +178,12 @@ +@@ -148,6 +206,12 @@ reg = <0x02098000 0x1000>, <0x02008000 0x1000>; }; diff --git a/target/linux/ipq806x/patches-3.18/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch b/target/linux/ipq806x/patches-3.18/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch index a3c3bbfc9e..c398487ae5 100644 --- a/target/linux/ipq806x/patches-3.18/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch +++ b/target/linux/ipq806x/patches-3.18/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -24,6 +24,11 @@ +@@ -25,6 +25,11 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; @@ -12,7 +12,7 @@ }; cpu@1 { -@@ -34,11 +39,24 @@ +@@ -35,11 +40,24 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; @@ -37,7 +37,7 @@ }; }; -@@ -71,6 +89,46 @@ +@@ -72,6 +90,46 @@ }; }; @@ -84,7 +84,7 @@ soc: soc { #address-cells = <1>; #size-cells = <1>; -@@ -171,11 +229,13 @@ +@@ -199,11 +257,13 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; diff --git a/target/linux/ipq806x/patches-3.18/157-ARM-DT-ipq8064-Add-ADM-device-node.patch b/target/linux/ipq806x/patches-3.18/157-ARM-DT-ipq8064-Add-ADM-device-node.patch index 657e36a68d..a6dc89764c 100644 --- a/target/linux/ipq806x/patches-3.18/157-ARM-DT-ipq8064-Add-ADM-device-node.patch +++ b/target/linux/ipq806x/patches-3.18/157-ARM-DT-ipq8064-Add-ADM-device-node.patch @@ -13,7 +13,7 @@ Signed-off-by: Andy Gross <agross@codeaurora.org> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -662,6 +662,26 @@ +@@ -705,6 +705,26 @@ }; }; diff --git a/target/linux/ipq806x/patches-3.18/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch b/target/linux/ipq806x/patches-3.18/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch index 29e1592899..6a8ec4ac4b 100644 --- a/target/linux/ipq806x/patches-3.18/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch +++ b/target/linux/ipq806x/patches-3.18/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch @@ -26,7 +26,7 @@ arch/arm/boot/dts/qcom-ipq8064.dtsi | 15 +++++++++++++++ --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -682,6 +682,22 @@ +@@ -725,6 +725,22 @@ status = "disabled"; }; diff --git a/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch b/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch index 7456b82df6..9c7c3a3af0 100644 --- a/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch +++ b/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch @@ -25,7 +25,7 @@ arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 36 ++++++++++++++++++++++++++++++++ --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -61,6 +61,31 @@ +@@ -43,6 +43,31 @@ bias-none; }; }; @@ -57,8 +57,8 @@ arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 36 ++++++++++++++++++++++++++++++++ }; gsbi@16300000 { -@@ -149,5 +174,19 @@ - pinctrl-names = "default"; +@@ -125,5 +150,19 @@ + status = "ok"; phy-tx0-term-offset = <7>; }; + diff --git a/target/linux/ipq806x/patches-3.18/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch b/target/linux/ipq806x/patches-3.18/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch index 926ee0b04f..1db21e4edc 100644 --- a/target/linux/ipq806x/patches-3.18/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch +++ b/target/linux/ipq806x/patches-3.18/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -183,6 +183,8 @@ +@@ -159,6 +159,8 @@ nand-ecc-strength = <4>; nand-bus-width = <8>; diff --git a/target/linux/ipq806x/patches-3.18/301-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch b/target/linux/ipq806x/patches-3.18/301-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch index a9b83a126b..032b01c684 100644 --- a/target/linux/ipq806x/patches-3.18/301-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch +++ b/target/linux/ipq806x/patches-3.18/301-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch @@ -22,7 +22,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> qcom-msm8974-sony-xperia-honami.dtb --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-r7500.dts -@@ -0,0 +1,362 @@ +@@ -0,0 +1,338 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +#include <dt-bindings/input/input.h> @@ -64,24 +64,6 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> + bias-disable; + }; + -+ pcie0_pins: pcie0_pinmux { -+ mux { -+ pins = "gpio3"; -+ function = "pcie1_rst"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ -+ pcie1_pins: pcie1_pinmux { -+ mux { -+ pins = "gpio48"; -+ function = "pcie2_rst"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ + nand_pins: nand_pins { + mux { + pins = "gpio34", "gpio35", "gpio36", @@ -173,16 +155,10 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> + + pcie0: pci@1b500000 { + status = "ok"; -+ reset-gpio = <&qcom_pinmux 3 0>; -+ pinctrl-0 = <&pcie0_pins>; -+ pinctrl-names = "default"; + }; + + pcie1: pci@1b700000 { + status = "ok"; -+ reset-gpio = <&qcom_pinmux 48 0>; -+ pinctrl-0 = <&pcie1_pins>; -+ pinctrl-names = "default"; + }; + + nand@1ac00000 { diff --git a/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch b/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch index 9e3a965768..0f2aebe5d4 100644 --- a/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch +++ b/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch @@ -22,7 +22,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; chosen { -@@ -86,6 +87,15 @@ +@@ -68,6 +69,15 @@ bias-bus-hold; }; }; @@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; gsbi@16300000 { -@@ -186,6 +196,34 @@ +@@ -162,6 +172,34 @@ linux,part-probe = "qcom-smem"; }; @@ -83,7 +83,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; chosen { -@@ -65,6 +66,15 @@ +@@ -38,6 +39,15 @@ bias-none; }; }; @@ -99,9 +99,9 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; gsbi2: gsbi@12480000 { -@@ -176,5 +186,44 @@ - pinctrl-0 = <&pcie2_pins>; - pinctrl-names = "default"; +@@ -140,5 +150,44 @@ + pcie2: pci@1b900000 { + status = "ok"; }; + + mdio0: mdio { diff --git a/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch index d580f77411..dcd320c07a 100644 --- a/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch +++ b/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch @@ -12,7 +12,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -96,6 +96,16 @@ +@@ -78,6 +78,16 @@ bias-disable; }; }; @@ -29,7 +29,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; gsbi@16300000 { -@@ -224,6 +234,27 @@ +@@ -200,6 +210,27 @@ reg = <4>; }; }; @@ -59,7 +59,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> --- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts -@@ -75,6 +75,14 @@ +@@ -48,6 +48,14 @@ bias-disable; }; }; @@ -74,7 +74,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; gsbi2: gsbi@12480000 { -@@ -225,5 +233,40 @@ +@@ -189,5 +197,40 @@ reg = <7>; }; }; @@ -117,7 +117,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -698,6 +698,92 @@ +@@ -741,6 +741,92 @@ status = "disabled"; }; diff --git a/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch index d80bc8f209..6ccb7d8080 100644 --- a/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch +++ b/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch @@ -15,59 +15,59 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -35,6 +35,24 @@ - bias-disable; - }; - -+ pcie0_pins: pcie0_pinmux { -+ mux { -+ pins = "gpio3"; -+ function = "pcie1_rst"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ -+ pcie1_pins: pcie1_pinmux { -+ mux { -+ pins = "gpio48"; -+ function = "pcie2_rst"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; -@@ -91,5 +109,21 @@ +@@ -91,5 +91,15 @@ sata@29000000 { status = "ok"; }; + + pcie0: pci@1b500000 { + status = "ok"; -+ reset-gpio = <&qcom_pinmux 3 0>; -+ pinctrl-0 = <&pcie0_pins>; -+ pinctrl-names = "default"; + phy-tx0-term-offset = <7>; + }; + + pcie1: pci@1b700000 { + status = "ok"; -+ reset-gpio = <&qcom_pinmux 48 0>; -+ pinctrl-0 = <&pcie1_pins>; -+ pinctrl-names = "default"; + phy-tx0-term-offset = <7>; + }; }; }; --- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts -@@ -30,6 +30,33 @@ - bias-disable; - }; +@@ -128,5 +128,17 @@ + usb30@1 { + status = "ok"; + }; ++ ++ pcie0: pci@1b500000 { ++ status = "ok"; ++ }; ++ ++ pcie1: pci@1b700000 { ++ status = "ok"; ++ }; ++ ++ pcie2: pci@1b900000 { ++ status = "ok"; ++ }; + }; + }; +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -4,6 +4,9 @@ + #include <dt-bindings/clock/qcom,gcc-ipq806x.h> + #include <dt-bindings/clock/qcom,lcc-ipq806x.h> + #include <dt-bindings/soc/qcom,gsbi.h> ++#include <dt-bindings/reset/qcom,gcc-ipq806x.h> ++#include <dt-bindings/interrupt-controller/arm-gic.h> ++#include <dt-bindings/gpio/gpio.h> + / { + model = "Qualcomm IPQ8064"; +@@ -99,6 +102,33 @@ + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 0x4>; ++ + pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; @@ -94,49 +94,10 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + bias-disable; + }; + }; -+ - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; -@@ -128,5 +155,26 @@ - usb30@1 { - status = "ok"; }; -+ -+ pcie0: pci@1b500000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 3 0>; -+ pinctrl-0 = <&pcie0_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie1: pci@1b700000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 48 0>; -+ pinctrl-0 = <&pcie1_pins>; -+ pinctrl-names = "default"; -+ }; -+ -+ pcie2: pci@1b900000 { -+ status = "ok"; -+ reset-gpio = <&qcom_pinmux 63 0>; -+ pinctrl-0 = <&pcie2_pins>; -+ pinctrl-names = "default"; -+ }; - }; - }; ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -4,6 +4,8 @@ - #include <dt-bindings/clock/qcom,gcc-ipq806x.h> - #include <dt-bindings/clock/qcom,lcc-ipq806x.h> - #include <dt-bindings/soc/qcom,gsbi.h> -+#include <dt-bindings/reset/qcom,gcc-ipq806x.h> -+#include <dt-bindings/interrupt-controller/arm-gic.h> - / { - model = "Qualcomm IPQ8064"; -@@ -333,6 +335,129 @@ + intc: interrupt-controller@2000000 { +@@ -333,6 +363,144 @@ compatible = "syscon"; reg = <0x01200600 0x100>; }; @@ -179,6 +140,11 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + <&gcc PCIE_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + ++ pinctrl-0 = <&pcie0_pins>; ++ pinctrl-names = "default"; ++ ++ perst-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; ++ + status = "disabled"; + }; + @@ -220,6 +186,11 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + <&gcc PCIE_1_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + ++ pinctrl-0 = <&pcie1_pins>; ++ pinctrl-names = "default"; ++ ++ perst-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; ++ + status = "disabled"; + }; + @@ -261,6 +232,11 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> + <&gcc PCIE_2_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + ++ pinctrl-0 = <&pcie2_pins>; ++ pinctrl-names = "default"; ++ ++ perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; ++ + status = "disabled"; + }; }; diff --git a/target/linux/ipq806x/patches-4.1/115-add-pcie-aux-clk-dts.patch b/target/linux/ipq806x/patches-4.1/115-add-pcie-aux-clk-dts.patch index d01e5a8ede..a99857e314 100644 --- a/target/linux/ipq806x/patches-4.1/115-add-pcie-aux-clk-dts.patch +++ b/target/linux/ipq806x/patches-4.1/115-add-pcie-aux-clk-dts.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -364,15 +364,21 @@ +@@ -392,15 +392,21 @@ clocks = <&gcc PCIE_A_CLK>, <&gcc PCIE_H_CLK>, @@ -24,9 +24,9 @@ + <&gcc PCIE_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; - status = "disabled"; - }; -@@ -405,15 +411,21 @@ + pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; +@@ -438,15 +444,21 @@ clocks = <&gcc PCIE_1_A_CLK>, <&gcc PCIE_1_H_CLK>, @@ -50,9 +50,9 @@ + <&gcc PCIE_1_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; - status = "disabled"; - }; -@@ -446,15 +458,21 @@ + pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; +@@ -484,15 +496,21 @@ clocks = <&gcc PCIE_2_A_CLK>, <&gcc PCIE_2_H_CLK>, @@ -76,5 +76,5 @@ + <&gcc PCIE_2_EXT_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy", "ext"; - status = "disabled"; - }; + pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; diff --git a/target/linux/ipq806x/patches-4.1/126-add-rpm-to-ipq8064-dts.patch b/target/linux/ipq806x/patches-4.1/126-add-rpm-to-ipq8064-dts.patch index be80f4c02f..7daa93163b 100644 --- a/target/linux/ipq806x/patches-4.1/126-add-rpm-to-ipq8064-dts.patch +++ b/target/linux/ipq806x/patches-4.1/126-add-rpm-to-ipq8064-dts.patch @@ -8,7 +8,7 @@ #include <dt-bindings/clock/qcom,lcc-ipq806x.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/reset/qcom,gcc-ipq806x.h> -@@ -92,6 +93,63 @@ +@@ -93,6 +94,63 @@ reg-names = "lpass-lpaif"; }; @@ -72,7 +72,7 @@ qcom_pinmux: pinmux@800000 { compatible = "qcom,ipq8064-pinctrl"; reg = <0x800000 0x4000>; -@@ -136,6 +194,12 @@ +@@ -164,6 +222,12 @@ reg = <0x02098000 0x1000>, <0x02008000 0x1000>; }; diff --git a/target/linux/ipq806x/patches-4.1/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch b/target/linux/ipq806x/patches-4.1/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch index 9435de63fe..aaf140126c 100644 --- a/target/linux/ipq806x/patches-4.1/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch +++ b/target/linux/ipq806x/patches-4.1/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -25,6 +25,11 @@ +@@ -26,6 +26,11 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; @@ -12,7 +12,7 @@ }; cpu@1 { -@@ -35,11 +40,24 @@ +@@ -36,11 +41,24 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; @@ -37,7 +37,7 @@ }; }; -@@ -72,6 +90,46 @@ +@@ -73,6 +91,46 @@ }; }; @@ -84,7 +84,7 @@ soc: soc { #address-cells = <1>; #size-cells = <1>; -@@ -187,11 +245,13 @@ +@@ -215,11 +273,13 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; diff --git a/target/linux/ipq806x/patches-4.1/157-ARM-DT-ipq8064-Add-ADM-device-node.patch b/target/linux/ipq806x/patches-4.1/157-ARM-DT-ipq8064-Add-ADM-device-node.patch index 159d912764..6f1013e32e 100644 --- a/target/linux/ipq806x/patches-4.1/157-ARM-DT-ipq8064-Add-ADM-device-node.patch +++ b/target/linux/ipq806x/patches-4.1/157-ARM-DT-ipq8064-Add-ADM-device-node.patch @@ -13,7 +13,7 @@ Signed-off-by: Andy Gross <agross@codeaurora.org> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -600,6 +600,26 @@ +@@ -643,6 +643,26 @@ status = "disabled"; }; diff --git a/target/linux/ipq806x/patches-4.1/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch b/target/linux/ipq806x/patches-4.1/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch index 5049b60834..6bdd5e05cc 100644 --- a/target/linux/ipq806x/patches-4.1/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch +++ b/target/linux/ipq806x/patches-4.1/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch @@ -26,7 +26,7 @@ arch/arm/boot/dts/qcom-ipq8064.dtsi | 15 +++++++++++++++ --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -620,6 +620,22 @@ +@@ -663,6 +663,22 @@ status = "disabled"; }; diff --git a/target/linux/ipq806x/patches-4.1/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch b/target/linux/ipq806x/patches-4.1/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch index cb726fa791..da1ec46c4e 100644 --- a/target/linux/ipq806x/patches-4.1/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch +++ b/target/linux/ipq806x/patches-4.1/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch @@ -25,7 +25,7 @@ arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 36 ++++++++++++++++++++++++++++++++ --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -61,6 +61,28 @@ +@@ -43,6 +43,28 @@ bias-none; }; }; @@ -54,8 +54,8 @@ arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 36 ++++++++++++++++++++++++++++++++ }; gsbi@16300000 { -@@ -125,5 +147,19 @@ - pinctrl-names = "default"; +@@ -101,5 +123,19 @@ + status = "ok"; phy-tx0-term-offset = <7>; }; + diff --git a/target/linux/ipq806x/patches-4.1/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch b/target/linux/ipq806x/patches-4.1/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch index 46c7e92a12..9005de4eb5 100644 --- a/target/linux/ipq806x/patches-4.1/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch +++ b/target/linux/ipq806x/patches-4.1/166-arch-qcom-dts-enable-qcom-smem-on-AP148-NAND.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -156,6 +156,8 @@ +@@ -132,6 +132,8 @@ nand-ecc-strength = <4>; nand-bus-width = <8>; diff --git a/target/linux/ipq806x/patches-4.1/301-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch b/target/linux/ipq806x/patches-4.1/301-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch index 12e06d222e..78a46e8b08 100644 --- a/target/linux/ipq806x/patches-4.1/301-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch +++ b/target/linux/ipq806x/patches-4.1/301-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch @@ -22,7 +22,7 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> qcom-msm8974-sony-xperia-honami.dtb --- /dev/null +++ b/arch/arm/boot/dts/qcom-ipq8064-r7500.dts -@@ -0,0 +1,362 @@ +@@ -0,0 +1,338 @@ +#include "qcom-ipq8064-v1.0.dtsi" + +#include <dt-bindings/input/input.h> @@ -64,24 +64,6 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> + bias-disable; + }; + -+ pcie0_pins: pcie0_pinmux { -+ mux { -+ pins = "gpio3"; -+ function = "pcie1_rst"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ -+ pcie1_pins: pcie1_pinmux { -+ mux { -+ pins = "gpio48"; -+ function = "pcie2_rst"; -+ drive-strength = <12>; -+ bias-disable; -+ }; -+ }; -+ + nand_pins: nand_pins { + mux { + pins = "gpio34", "gpio35", "gpio36", @@ -173,16 +155,10 @@ Signed-off-by: Jonas Gorski <jogo@openwrt.org> + + pcie0: pci@1b500000 { + status = "ok"; -+ reset-gpio = <&qcom_pinmux 3 0>; -+ pinctrl-0 = <&pcie0_pins>; -+ pinctrl-names = "default"; + }; + + pcie1: pci@1b700000 { + status = "ok"; -+ reset-gpio = <&qcom_pinmux 48 0>; -+ pinctrl-0 = <&pcie1_pins>; -+ pinctrl-names = "default"; + }; + + nand@1ac00000 { diff --git a/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch b/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch index 03fb5d9f5a..5126e9061e 100644 --- a/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch +++ b/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch @@ -22,7 +22,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; chosen { -@@ -83,6 +84,15 @@ +@@ -65,6 +66,15 @@ bias-bus-hold; }; }; @@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; gsbi@16300000 { -@@ -159,6 +169,34 @@ +@@ -135,6 +145,34 @@ linux,part-probe = "qcom-smem"; }; @@ -83,7 +83,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; chosen { -@@ -65,6 +66,15 @@ +@@ -38,6 +39,15 @@ bias-none; }; }; @@ -99,9 +99,9 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; gsbi2: gsbi@12480000 { -@@ -176,5 +186,44 @@ - pinctrl-0 = <&pcie2_pins>; - pinctrl-names = "default"; +@@ -140,5 +150,44 @@ + pcie2: pci@1b900000 { + status = "ok"; }; + + mdio0: mdio { diff --git a/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch index bb4b3b27c4..d143118fd4 100644 --- a/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch +++ b/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch @@ -12,7 +12,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -93,6 +93,16 @@ +@@ -75,6 +75,16 @@ bias-disable; }; }; @@ -29,7 +29,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; gsbi@16300000 { -@@ -197,6 +207,27 @@ +@@ -173,6 +183,27 @@ reg = <4>; }; }; @@ -59,7 +59,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> --- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts -@@ -75,6 +75,14 @@ +@@ -48,6 +48,14 @@ bias-disable; }; }; @@ -74,7 +74,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; gsbi2: gsbi@12480000 { -@@ -225,5 +233,40 @@ +@@ -189,5 +197,40 @@ reg = <7>; }; }; @@ -117,7 +117,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> }; --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -636,6 +636,92 @@ +@@ -679,6 +679,92 @@ status = "disabled"; }; |