diff options
Diffstat (limited to 'target/linux')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/01_leds | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/board.d/02_network | 1 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/diag.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/ramips.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 | ||||
| -rw-r--r-- | target/linux/ramips/dts/XIAOMI-MIWIFI-MINI.dts | 148 | ||||
| -rw-r--r-- | target/linux/ramips/image/Makefile | 2 | ||||
| -rw-r--r-- | target/linux/ramips/mt7620/profiles/xiaomi-miwifi-mini.mk | 18 |
8 files changed, 179 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index af3dddcc58..cfc782ed07 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -231,6 +231,9 @@ case $board in wt3020) ucidef_set_led_default "power" "power" "nexx:blue:power" "0" ;; + xiaomi-miwifi-mini) + ucidef_set_led_default "power" "power" "xiaomi:red:status" "1" + ;; y1 |\ y1s) ucidef_set_led_default "power" "power" "lenovo:blue:power" "1" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 7724c3e40a..f298aa47af 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -130,6 +130,7 @@ ramips_setup_interfaces() wsr-600 | \ wsr-1166 | \ wt1520 | \ + xiaomi-miwifi-mini |\ y1) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 808177bc0d..e9b39970ca 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -210,6 +210,9 @@ get_status_led() { xdxrn502j) status_led="xdxrn502j:green:power" ;; + xiaomi-mini) + status_led="xiaomi:red:status" + ;; f7c027) status_led="belkin:orange:status" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index f43725ef9d..4527414e6e 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -367,6 +367,9 @@ ramips_board_detect() { *"Wansview NCS601W") name="ncs601w" ;; + *"Xiaomi MiWiFi Mini") + name="xiaomi-miwifi-mini" + ;; *"Sercomm NA930") name="na930" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 0dfdf9de86..356a0856c9 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -110,6 +110,7 @@ platform_check_image() { wt3020 |\ x5 |\ x8 |\ + xiaomi-miwifi-mini |\ y1 |\ y1s |\ zbt-wa05) diff --git a/target/linux/ramips/dts/XIAOMI-MIWIFI-MINI.dts b/target/linux/ramips/dts/XIAOMI-MIWIFI-MINI.dts new file mode 100644 index 0000000000..fda3325b53 --- /dev/null +++ b/target/linux/ramips/dts/XIAOMI-MIWIFI-MINI.dts @@ -0,0 +1,148 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "XIAOMI MIWIFI MINI", "ralink,mt7620a-soc"; + model = "Xiaomi MiWiFi Mini"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + gpio0: gpio@600 { + status = "okay"; + }; + + gpio1: gpio@638 { + status = "okay"; + }; + + gpio2: gpio@660 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q128"; + reg = <0 0>; + linux,modalias = "m25p80", "w25q128"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xf80000>; + }; + + partition@fd0000 { + label = "crash"; + reg = <0xfd0000 0x10000>; + }; + + partition@fe0000 { + label = "reserved"; + reg = <0xfe0000 0x10000>; + read-only; + }; + + partition@ff0000 { + label = "Bdata"; + reg = <0xff0000 0x10000>; + }; + }; + }; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + ralink,port-map = "llllw"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + pcie@10140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "rgmii1"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue { + label = "xiaomi:blue:status"; + gpios = <&gpio1 0 1>; + }; + + yellow { + label = "xiaomi:yellow:status"; + gpios = <&gpio1 2 1>; + }; + + red { + label = "xiaomi:red:status"; + gpios = <&gpio1 5 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio1 6 0>; + linux,code = <0x198>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index d35c4206b8..73637300fd 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -858,6 +858,7 @@ Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT- Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT) Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE) Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020) +Image/Build/Profile/XIAOMI-MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),xiaomi-miwifi-mini,XIAOMI-MIWIFI-MINI) Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i) @@ -886,6 +887,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/WR8305RT,$(1)) $(call Image/Build/Profile/WRTNODE,$(1)) $(call Image/Build/Profile/WT3020,$(1)) + $(call Image/Build/Profile/XIAOMI-MIWIFI-MINI,$(1)) $(call Image/Build/Profile/ZBT-WA05,$(1)) $(call Image/Build/Profile/ArcherC20i,$(1)) endef diff --git a/target/linux/ramips/mt7620/profiles/xiaomi-miwifi-mini.mk b/target/linux/ramips/mt7620/profiles/xiaomi-miwifi-mini.mk new file mode 100644 index 0000000000..47819b2aaa --- /dev/null +++ b/target/linux/ramips/mt7620/profiles/xiaomi-miwifi-mini.mk @@ -0,0 +1,18 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/XIAOMI-MIWIFI-MINI + NAME:=Xiaomi MiWiFi Mini + PACKAGES:=\ + kmod-usb-core kmod-usb-dwc2 kmod-usb2 kmod-usb-ohci \ + kmod-mt76 +endef + +define Profile/XIAOMI-MIWIFI-MINI/Description + Support for Xiaomi MiWiFi Mini routers +endef +$(eval $(call Profile,XIAOMI-MIWIFI-MINI)) |