diff options
Diffstat (limited to 'target/linux')
| -rwxr-xr-x | target/linux/ramips/base-files/etc/uci-defaults/01_leds | 5 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/etc/uci-defaults/02_network | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/ramips.sh | 3 | ||||
| -rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 3 | ||||
| -rw-r--r-- | target/linux/ramips/dts/ZBT-WA05.dts | 112 | ||||
| -rw-r--r-- | target/linux/ramips/image/Makefile | 2 |
6 files changed, 126 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/uci-defaults/01_leds b/target/linux/ramips/base-files/etc/uci-defaults/01_leds index c2f768b8a3..00b604008e 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/01_leds +++ b/target/linux/ramips/base-files/etc/uci-defaults/01_leds @@ -181,6 +181,11 @@ case $board in ucidef_set_led_default "power" "power" "buffalo:green:power" "1" ucidef_set_led_default "router" "router" "buffalo:green:router" "1" ;; + zbt-wa05) + ucidef_set_led_default "power" "power" "zbtlink:blue:power" "1" + set_wifi_led "zbtlink:blue:air" + set_usb_led "zbtlink:blue:usb" + ;; esac ucidef_commit_leds diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index 4eef735d93..a14acb6252 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -112,7 +112,8 @@ ramips_setup_interfaces() hg255d | \ rt-n14u | \ wrtnode | \ - ur-326n4g) + ur-326n4g | \ + zbt-wa05) ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index ca339b354c..2ae8c9e8ff 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -307,6 +307,9 @@ ramips_board_detect() { *"Sercomm NA930") name="na930" ;; + *"Zbtlink ZBT-WA05") + name="zbt-wa05" + ;; *) name="generic" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index a39c433e8f..805a63fed4 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -91,7 +91,8 @@ platform_check_image() { wmr300 |\ wrtnode |\ x5 |\ - x8) + x8 |\ + zbt-wa05) [ "$magic" != "27051956" ] && { echo "Invalid image type." return 1 diff --git a/target/linux/ramips/dts/ZBT-WA05.dts b/target/linux/ramips/dts/ZBT-WA05.dts new file mode 100644 index 0000000000..714d2733a6 --- /dev/null +++ b/target/linux/ramips/dts/ZBT-WA05.dts @@ -0,0 +1,112 @@ +/dts-v1/; + +/include/ "mt7620n.dtsi" + +/ { + compatible = "zbtlink,zbt-wa05", "ralink,mt7620n-soc"; + model = "Zbtlink ZBT-WA05"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + palmbus@10000000 { + gpio1: gpio@638 { + status = "okay"; + }; + + gpio2: gpio@660 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + en25q64@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q64"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x760000>; + }; + }; + }; + }; + + ehci@101c0000 { + status = "okay"; + }; + + ohci@101c1000 { + status = "okay"; + }; + + ethernet@10100000 { + mtd-mac-address = <&factory 0x4>; + ralink,port-map = "llllw"; + }; + + pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "spi refclk", "wled"; + ralink,function = "gpio"; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power { + label = "zbtlink:blue:power"; + gpios = <&gpio1 14 1>; + }; + usb { + label = "zbtlink:blue:usb"; + gpios = <&gpio1 15 0>; + }; + air { + label = "zbtlink:blue:air"; + gpios = <&gpio3 0 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 1 1>; + linux,code = <0x198>; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 5b23035b4e..e3ba60ed95 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -738,12 +738,14 @@ endif Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300) Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U) Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE) +Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05) ifeq ($(SUBTARGET),mt7620n) define Image/Build/Profile/Default $(call Image/Build/Profile/WMR300,$(1)) $(call Image/Build/Profile/RT-N14U,$(1)) $(call Image/Build/Profile/WRTNODE,$(1)) + $(call Image/Build/Profile/ZBT-WA05,$(1)) endef endif |