aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rw-r--r--target/linux/bcm53xx/config-4.4314
-rw-r--r--target/linux/bcm53xx/patches-4.4/020-ARM-BCM5310X-activate-erratas-needed-for-SoC.patch31
-rw-r--r--target/linux/bcm53xx/patches-4.4/050-ARM-dts-enable-clock-support-for-BCM5301X.patch153
-rw-r--r--target/linux/bcm53xx/patches-4.4/083-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch218
-rw-r--r--target/linux/bcm53xx/patches-4.4/101-use-part-parser.patch11
-rw-r--r--target/linux/bcm53xx/patches-4.4/112-bcm53xx-sprom-add-sprom-driver.patch69
-rw-r--r--target/linux/bcm53xx/patches-4.4/130-dt-bindings-add-SMP-enable-method-for-Broadcom-NSP.patch69
-rw-r--r--target/linux/bcm53xx/patches-4.4/131-ARM-BCM-Clean-up-SMP-support-for-Broadcom-Kona.patch206
-rw-r--r--target/linux/bcm53xx/patches-4.4/133-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch560
-rw-r--r--target/linux/bcm53xx/patches-4.4/134-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch57
-rw-r--r--target/linux/bcm53xx/patches-4.4/150-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch29
-rw-r--r--target/linux/bcm53xx/patches-4.4/151-PCI-iproc-Add-PAXC-interface-support.patch428
-rw-r--r--target/linux/bcm53xx/patches-4.4/152-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch67
-rw-r--r--target/linux/bcm53xx/patches-4.4/153-PCI-iproc-Add-iProc-PCIe-MSI-support.patch887
-rw-r--r--target/linux/bcm53xx/patches-4.4/170-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch52
-rw-r--r--target/linux/bcm53xx/patches-4.4/186-USB-bcma-switch-to-GPIO-descriptor-for-power-control.patch73
-rw-r--r--target/linux/bcm53xx/patches-4.4/190-usb-xhci-plat-fix-adding-usb3-lpm-capable-quirk.patch63
-rw-r--r--target/linux/bcm53xx/patches-4.4/191-usb-xhci-add-Broadcom-specific-fake-doorbell.patch135
-rw-r--r--target/linux/bcm53xx/patches-4.4/195-USB-bcma-make-helper-creating-platform-dev-more-gene.patch75
-rw-r--r--target/linux/bcm53xx/patches-4.4/196-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch112
-rw-r--r--target/linux/bcm53xx/patches-4.4/197-USB-bcma-add-USB-3.0-support.patch295
-rw-r--r--target/linux/bcm53xx/patches-4.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch86
-rw-r--r--target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-SPROM.patch26
-rw-r--r--target/linux/bcm53xx/patches-4.4/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch69
-rw-r--r--target/linux/bcm53xx/patches-4.4/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch41
-rw-r--r--target/linux/bcm53xx/patches-4.4/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch66
-rw-r--r--target/linux/bcm53xx/patches-4.4/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch170
-rw-r--r--target/linux/bcm53xx/patches-4.4/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch173
-rw-r--r--target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch20
-rw-r--r--target/linux/bcm53xx/patches-4.4/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch111
-rw-r--r--target/linux/bcm53xx/patches-4.4/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch31
-rw-r--r--target/linux/bcm53xx/patches-4.4/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch20
-rw-r--r--target/linux/bcm53xx/patches-4.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch59
-rw-r--r--target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch42
-rw-r--r--target/linux/bcm53xx/patches-4.4/800-bcma-use-two-different-initcalls-if-built-in.patch65
-rw-r--r--target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch42
36 files changed, 4925 insertions, 0 deletions
diff --git a/target/linux/bcm53xx/config-4.4 b/target/linux/bcm53xx/config-4.4
new file mode 100644
index 0000000000..337c59894d
--- /dev/null
+++ b/target/linux/bcm53xx/config-4.4
@@ -0,0 +1,314 @@
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_BCM=y
+# CONFIG_ARCH_BCM_21664 is not set
+# CONFIG_ARCH_BCM_281XX is not set
+CONFIG_ARCH_BCM_5301X=y
+# CONFIG_ARCH_BCM_63XX is not set
+# CONFIG_ARCH_BCM_CYGNUS is not set
+CONFIG_ARCH_BCM_IPROC=y
+# CONFIG_ARCH_BRCMSTB is not set
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_APPENDED_DTB=y
+# CONFIG_ARM_ATAG_DTB_COMPAT is not set
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GLOBAL_TIMER=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_HEAVY_MB=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_SP805_WATCHDOG is not set
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_B53=y
+# CONFIG_B53_MMAP_DRIVER is not set
+# CONFIG_B53_PHY_DRIVER is not set
+CONFIG_B53_SRAB_DRIVER=y
+CONFIG_BCM47XX_NVRAM=y
+CONFIG_BCM47XX_SPROM=y
+CONFIG_BCM47XX_WDT=y
+CONFIG_BCMA=y
+CONFIG_BCMA_BLOCKIO=y
+CONFIG_BCMA_DEBUG=y
+CONFIG_BCMA_DRIVER_GMAC_CMN=y
+CONFIG_BCMA_DRIVER_GPIO=y
+CONFIG_BCMA_DRIVER_PCI=y
+CONFIG_BCMA_HOST_PCI=y
+CONFIG_BCMA_HOST_PCI_POSSIBLE=y
+CONFIG_BCMA_HOST_SOC=y
+CONFIG_BGMAC=y
+CONFIG_BOUNCE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_IPROC=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_XZ=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BCM_5301X=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UART_8250_SHIFT=0
+CONFIG_DEBUG_UART_PHYS=0x18000300
+CONFIG_DEBUG_UART_VIRT=0xf1000300
+CONFIG_DEBUG_UNCOMPRESS=y
+CONFIG_DEBUG_USER=y
+CONFIG_DTC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FRAME_POINTER=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_74X164=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_BCM47XX_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_BRCMNAND=y
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_PHYSMAP_OF is not set
+CONFIG_MTD_SPI_BCM53XXSPIFLASH=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NR_CPUS=2
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_ADDRESS_PCI=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCIE_IPROC=y
+CONFIG_PCIE_IPROC_BCMA=y
+# CONFIG_PCIE_IPROC_PLATFORM is not set
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+# CONFIG_PL310_ERRATA_753970 is not set
+# CONFIG_PL310_ERRATA_769419 is not set
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCHED_INFO is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_AMBA_PL010 is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SG_SPLIT is not set
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_BCM53XX=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SRCU=y
+CONFIG_STOP_MACHINE=y
+# CONFIG_SUNXI_SRAM is not set
+CONFIG_SWCONFIG=y
+CONFIG_SWIOTLB=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TREE_RCU=y
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_XZ=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+# CONFIG_VFP is not set
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/bcm53xx/patches-4.4/020-ARM-BCM5310X-activate-erratas-needed-for-SoC.patch b/target/linux/bcm53xx/patches-4.4/020-ARM-BCM5310X-activate-erratas-needed-for-SoC.patch
new file mode 100644
index 0000000000..8169da90c5
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/020-ARM-BCM5310X-activate-erratas-needed-for-SoC.patch
@@ -0,0 +1,31 @@
+From f4ce7effe2253a325f8ba182903cbdf0d8698593 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 21 Nov 2015 15:29:47 +0100
+Subject: [PATCH] ARM: BCM5310X: activate erratas needed for SoC
+
+The BCM4708 I have, which is probably the first generation which got
+to the consumer market, is using a ARM Cortex-A9 rev r3p0 and a
+L2C-310 rev r3p2 L2 cache controller. There are 3 workarounds for known
+erratas in the Linux kernel which could be activated and will be in
+this patch. There are currently no workarounds which have to be
+activated for the L2C-310 rev r3p2 in Linux.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/mach-bcm/Kconfig | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/arm/mach-bcm/Kconfig
++++ b/arch/arm/mach-bcm/Kconfig
+@@ -52,6 +52,10 @@ config ARCH_BCM_NSP
+ config ARCH_BCM_5301X
+ bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+ select ARCH_BCM_IPROC
++ select ARM_ERRATA_754322
++ select ARM_ERRATA_775420
++ select ARM_ERRATA_764369 if SMP
++
+ help
+ Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
+
diff --git a/target/linux/bcm53xx/patches-4.4/050-ARM-dts-enable-clock-support-for-BCM5301X.patch b/target/linux/bcm53xx/patches-4.4/050-ARM-dts-enable-clock-support-for-BCM5301X.patch
new file mode 100644
index 0000000000..a9a5246c0c
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/050-ARM-dts-enable-clock-support-for-BCM5301X.patch
@@ -0,0 +1,153 @@
+From e96ef422d0095fe9ae39b03c0805a0db8ff7e382 Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Tue, 13 Oct 2015 17:22:25 -0400
+Subject: [PATCH 50/50] ARM: dts: enable clock support for BCM5301X
+
+Replace current device tree dummy clocks with real clock support for
+Broadcom Northstar SoCs.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 88 ++++++++++++++++++++++++++++++++---------
+ 1 file changed, 69 insertions(+), 19 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -8,6 +8,7 @@
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
++#include <dt-bindings/clock/bcm-nsp.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+@@ -42,41 +43,48 @@
+
+ mpcore {
+ compatible = "simple-bus";
+- ranges = <0x00000000 0x19020000 0x00003000>;
++ ranges = <0x00000000 0x19000000 0x00023000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+- scu@0000 {
++ a9pll: arm_clk@00000 {
++ #clock-cells = <0>;
++ compatible = "brcm,nsp-armpll";
++ clocks = <&osc>;
++ reg = <0x00000 0x1000>;
++ };
++
++ scu@20000 {
+ compatible = "arm,cortex-a9-scu";
+- reg = <0x0000 0x100>;
++ reg = <0x20000 0x100>;
+ };
+
+- timer@0200 {
++ timer@20200 {
+ compatible = "arm,cortex-a9-global-timer";
+- reg = <0x0200 0x100>;
++ reg = <0x20200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+- clocks = <&clk_periph>;
++ clocks = <&periph_clk>;
+ };
+
+- local-timer@0600 {
++ local-timer@20600 {
+ compatible = "arm,cortex-a9-twd-timer";
+- reg = <0x0600 0x100>;
++ reg = <0x20600 0x100>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+- clocks = <&clk_periph>;
++ clocks = <&periph_clk>;
+ };
+
+- gic: interrupt-controller@1000 {
++ gic: interrupt-controller@21000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+- reg = <0x1000 0x1000>,
+- <0x0100 0x100>;
++ reg = <0x21000 0x1000>,
++ <0x20100 0x100>;
+ };
+
+- L2: cache-controller@2000 {
++ L2: cache-controller@22000 {
+ compatible = "arm,pl310-cache";
+- reg = <0x2000 0x1000>;
++ reg = <0x22000 0x1000>;
+ cache-unified;
+ arm,shared-override;
+ prefetch-data = <1>;
+@@ -94,14 +102,37 @@
+
+ clocks {
+ #address-cells = <1>;
+- #size-cells = <0>;
++ #size-cells = <1>;
++ ranges;
+
+- /* As long as we do not have a real clock driver us this
+- * fixed clock */
+- clk_periph: periph {
++ osc: oscillator {
++ #clock-cells = <0>;
+ compatible = "fixed-clock";
++ clock-frequency = <25000000>;
++ };
++
++ iprocmed: iprocmed {
+ #clock-cells = <0>;
+- clock-frequency = <400000000>;
++ compatible = "fixed-factor-clock";
++ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
++ clock-div = <2>;
++ clock-mult = <1>;
++ };
++
++ iprocslow: iprocslow {
++ #clock-cells = <0>;
++ compatible = "fixed-factor-clock";
++ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
++ clock-div = <4>;
++ clock-mult = <1>;
++ };
++
++ periph_clk: periph_clk {
++ #clock-cells = <0>;
++ compatible = "fixed-factor-clock";
++ clocks = <&a9pll>;
++ clock-div = <2>;
++ clock-mult = <1>;
+ };
+ };
+
+@@ -189,4 +220,23 @@
+
+ brcm,nand-has-wp;
+ };
++
++ lcpll0: lcpll0@1800c100 {
++ #clock-cells = <1>;
++ compatible = "brcm,nsp-lcpll0";
++ reg = <0x1800c100 0x14>;
++ clocks = <&osc>;
++ clock-output-names = "lcpll0", "pcie_phy", "sdio",
++ "ddr_phy";
++ };
++
++ genpll: genpll@1800c140 {
++ #clock-cells = <1>;
++ compatible = "brcm,nsp-genpll";
++ reg = <0x1800c140 0x24>;
++ clocks = <&osc>;
++ clock-output-names = "genpll", "phy", "ethernetclk",
++ "usbclk", "iprocfast", "sata1",
++ "sata2";
++ };
+ };
diff --git a/target/linux/bcm53xx/patches-4.4/083-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch b/target/linux/bcm53xx/patches-4.4/083-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch
new file mode 100644
index 0000000000..cd22e19176
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/083-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch
@@ -0,0 +1,218 @@
+From a0aef7fbab0d8b5a0d445c74990e5233beda246e Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Wed, 21 Oct 2015 18:46:04 -0400
+Subject: [PATCH] ARM: dts: bcm5301x: Add BCM SVK DT files
+
+Add device tree files for Broadcom Northstar based SVKs. Since the
+bcm5301x.dtsi already exists, all that is necessary is the dts files to
+enable the UARTs. With these files, the SVKs are able to boot to shell.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+---
+ arch/arm/boot/dts/Makefile | 5 +++-
+ arch/arm/boot/dts/bcm94708.dts | 56 +++++++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/bcm94709.dts | 56 +++++++++++++++++++++++++++++++++++
+ arch/arm/boot/dts/bcm953012k.dts | 63 ++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 179 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/bcm94708.dts
+ create mode 100644 arch/arm/boot/dts/bcm94709.dts
+ create mode 100644 arch/arm/boot/dts/bcm953012k.dts
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -75,7 +75,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4709-asus-rt-ac87u.dtb \
+ bcm4709-buffalo-wxr-1900dhp.dtb \
+ bcm4709-netgear-r7000.dtb \
+- bcm4709-netgear-r8000.dtb
++ bcm4709-netgear-r8000.dtb \
++ bcm94708.dtb \
++ bcm94709.dtb \
++ bcm953012k.dtb
+ dtb-$(CONFIG_ARCH_BCM_63XX) += \
+ bcm963138dvt.dtb
+ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm94708.dts
+@@ -0,0 +1,56 @@
++/*
++ * BSD LICENSE
++ *
++ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ *
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in
++ * the documentation and/or other materials provided with the
++ * distribution.
++ * * Neither the name of Broadcom Corporation nor the names of its
++ * contributors may be used to endorse or promote products derived
++ * from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
++ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
++ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++
++/ {
++ model = "NorthStar SVK (BCM94708)";
++ compatible = "brcm,bcm94708", "brcm,bcm4708";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm94709.dts
+@@ -0,0 +1,56 @@
++/*
++ * BSD LICENSE
++ *
++ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ *
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in
++ * the documentation and/or other materials provided with the
++ * distribution.
++ * * Neither the name of Broadcom Corporation nor the names of its
++ * contributors may be used to endorse or promote products derived
++ * from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
++ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
++ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++
++/ {
++ model = "NorthStar SVK (BCM94709)";
++ compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
++
++ aliases {
++ serial0 = &uart0;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm953012k.dts
+@@ -0,0 +1,63 @@
++/*
++ * BSD LICENSE
++ *
++ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ *
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in
++ * the documentation and/or other materials provided with the
++ * distribution.
++ * * Neither the name of Broadcom Corporation nor the names of its
++ * contributors may be used to endorse or promote products derived
++ * from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
++ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
++ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++
++/ {
++ model = "NorthStar SVK (BCM953012K)";
++ compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
++
++ aliases {
++ serial0 = &uart0;
++ serial1 = &uart1;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ memory {
++ reg = <0x00000000 0x10000000>;
++ };
++};
++
++&uart0 {
++ clock-frequency = <62499840>;
++ status = "okay";
++};
++
++&uart1 {
++ clock-frequency = <62499840>;
++ status = "okay";
++};
diff --git a/target/linux/bcm53xx/patches-4.4/101-use-part-parser.patch b/target/linux/bcm53xx/patches-4.4/101-use-part-parser.patch
new file mode 100644
index 0000000000..8d48673c6d
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/101-use-part-parser.patch
@@ -0,0 +1,11 @@
+--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
++++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
+@@ -19,6 +19,8 @@
+
+ nand-ecc-strength = <8>;
+ nand-ecc-step-size = <512>;
++
++ linux,part-probe = "ofpart", "bcm47xxpart";
+ };
+ };
+ };
diff --git a/target/linux/bcm53xx/patches-4.4/112-bcm53xx-sprom-add-sprom-driver.patch b/target/linux/bcm53xx/patches-4.4/112-bcm53xx-sprom-add-sprom-driver.patch
new file mode 100644
index 0000000000..70ab03995c
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/112-bcm53xx-sprom-add-sprom-driver.patch
@@ -0,0 +1,69 @@
+From 4e0ab3269a6d260a41a3673157753147f5f71341 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 4 May 2014 13:19:20 +0200
+Subject: [PATCH 03/17] bcm47xx-sprom: add Broadcom sprom parser driver
+
+This driver needs an nvram driver and fetches the sprom values from the
+nvram and provides it to any other driver. The calibration data for the
+wifi chip the mac address and some more board description data is
+stores in the sprom.
+
+This is based on a copy of arch/mips/bcm47xx/sprom.c and my plan is to
+make the bcm47xx MIPS SoCs also use this driver some time later.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ .../devicetree/bindings/misc/bcm47xx-sprom.txt | 16 +
+ drivers/misc/Kconfig | 11 +
+ drivers/misc/Makefile | 1 +
+ drivers/misc/bcm47xx-sprom.c | 690 +++++++++++++++++++++
+ 4 files changed, 718 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
+ create mode 100644 drivers/misc/bcm47xx-sprom.c
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
+@@ -0,0 +1,16 @@
++Broadcom bcm47xx/bcm53xx sprom converter
++
++This driver provbides an sprom based on a given nvram.
++
++Required properties:
++
++- compatible : brcm,bcm47xx-sprom
++
++- nvram : reference to a nvram driver, e.g. bcm47xx-nvram
++
++Example:
++
++sprom0: sprom@0 {
++ compatible = "brcm,bcm47xx-sprom";
++ nvram = <&nvram0>;
++};
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -525,6 +525,17 @@ config VEXPRESS_SYSCFG
+ bus. System Configuration interface is one of the possible means
+ of generating transactions on this bus.
+
++config BCM47XX_SPROM
++ tristate "BCM47XX sprom driver"
++ help
++ This driver parses the sprom from a given nvram which is found on
++ Broadcom bcm47xx and bcm53xx SoCs.
++
++ The sprom contains board configuration data like the
++ calibration data fro the wifi chips, the mac addresses used
++ by the board and many other board configuration data. This
++ driver will provide the sprom to bcma.
++
+ source "drivers/misc/c2port/Kconfig"
+ source "drivers/misc/eeprom/Kconfig"
+ source "drivers/misc/cb710/Kconfig"
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -56,3 +56,4 @@ obj-$(CONFIG_GENWQE) += genwqe/
+ obj-$(CONFIG_ECHO) += echo/
+ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
+ obj-$(CONFIG_CXL_BASE) += cxl/
++obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx-sprom.o
diff --git a/target/linux/bcm53xx/patches-4.4/130-dt-bindings-add-SMP-enable-method-for-Broadcom-NSP.patch b/target/linux/bcm53xx/patches-4.4/130-dt-bindings-add-SMP-enable-method-for-Broadcom-NSP.patch
new file mode 100644
index 0000000000..1de37b0132
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/130-dt-bindings-add-SMP-enable-method-for-Broadcom-NSP.patch
@@ -0,0 +1,69 @@
+From 204b9dbd7c4bd5a223fd104b9cba56c12fe04add Mon Sep 17 00:00:00 2001
+From: Kapil Hali <kapilh@broadcom.com>
+Date: Wed, 19 Aug 2015 13:42:23 -0400
+Subject: [PATCH 130/134] dt-bindings: add SMP enable-method for Broadcom NSP
+
+Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's
+Northstar Plus CPU to the 32-bit ARM CPU device tree binding
+documentation file and create a new binding documentation for
+Northstar Plus CPU.
+
+Signed-off-by: Kapil Hali <kapilh@broadcom.com>
+---
+ .../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 39 ++++++++++++++++++++++
+ Documentation/devicetree/bindings/arm/cpus.txt | 1 +
+ 2 files changed, 40 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
+@@ -0,0 +1,39 @@
++Broadcom Northstar Plus SoC CPU Enable Method
++---------------------------------------------
++This binding defines the enable method used for starting secondary
++CPUs in the following Broadcom SoCs:
++ BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
++
++The enable method is specified by defining the following required
++properties in the "cpus" device tree node:
++ - enable-method = "brcm,bcm-nsp-smp";
++ - secondary-boot-reg = <...>;
++
++The secondary-boot-reg property is a u32 value that specifies the
++physical address of the register which should hold the common
++entry point for a secondary CPU. This entry is cpu node specific
++and should be added per cpu. E.g., in case of NSP (BCM58625) which
++is a dual core CPU SoC, this entry should be added to cpu1 node.
++
++
++Example:
++ cpus {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ enable-method = "brcm,bcm-nsp-smp";
++
++ cpu0: cpu@0 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a9";
++ next-level-cache = <&L2>;
++ reg = <0>;
++ };
++
++ cpu1: cpu@1 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a9";
++ next-level-cache = <&L2>;
++ reg = <1>;
++ secondary-boot-reg = <0xffff042c>;
++ };
++ };
+--- a/Documentation/devicetree/bindings/arm/cpus.txt
++++ b/Documentation/devicetree/bindings/arm/cpus.txt
+@@ -190,6 +190,7 @@ nodes to be present and contain the prop
+ "allwinner,sun6i-a31"
+ "allwinner,sun8i-a23"
+ "arm,psci"
++ "brcm,bcm-nsp-smp"
+ "brcm,brahma-b15"
+ "marvell,armada-375-smp"
+ "marvell,armada-380-smp"
diff --git a/target/linux/bcm53xx/patches-4.4/131-ARM-BCM-Clean-up-SMP-support-for-Broadcom-Kona.patch b/target/linux/bcm53xx/patches-4.4/131-ARM-BCM-Clean-up-SMP-support-for-Broadcom-Kona.patch
new file mode 100644
index 0000000000..7a48a13e64
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/131-ARM-BCM-Clean-up-SMP-support-for-Broadcom-Kona.patch
@@ -0,0 +1,206 @@
+From 8622d6da5d95293d474c156612fd819fdaf542ec Mon Sep 17 00:00:00 2001
+From: Kapil Hali <kapilh@broadcom.com>
+Date: Wed, 25 Nov 2015 08:58:53 -0500
+Subject: [PATCH 131/134] ARM: BCM: Clean up SMP support for Broadcom Kona
+
+These changes cleans up SMP implementaion for Broadcom's
+Kona SoC which are required for handling SMP for iProc
+family of SoCs at a single place for BCM NSP and BCM Kona.
+
+Signed-off-by: Kapil Hali <kapilh@broadcom.com>
+---
+ arch/arm/boot/dts/bcm11351.dtsi | 2 +-
+ arch/arm/boot/dts/bcm21664.dtsi | 2 +-
+ arch/arm/mach-bcm/kona_smp.c | 82 +++++++++++++++++++++++++++--------------
+ 3 files changed, 56 insertions(+), 30 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm11351.dtsi
++++ b/arch/arm/boot/dts/bcm11351.dtsi
+@@ -31,7 +31,6 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "brcm,bcm11351-cpu-method";
+- secondary-boot-reg = <0x3500417c>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+@@ -42,6 +41,7 @@
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
++ secondary-boot-reg = <0x3500417c>;
+ reg = <1>;
+ };
+ };
+--- a/arch/arm/boot/dts/bcm21664.dtsi
++++ b/arch/arm/boot/dts/bcm21664.dtsi
+@@ -31,7 +31,6 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "brcm,bcm11351-cpu-method";
+- secondary-boot-reg = <0x35004178>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+@@ -42,6 +41,7 @@
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
++ secondary-boot-reg = <0x35004178>;
+ reg = <1>;
+ };
+ };
+--- a/arch/arm/mach-bcm/kona_smp.c
++++ b/arch/arm/mach-bcm/kona_smp.c
+@@ -1,5 +1,5 @@
+ /*
+- * Copyright (C) 2014 Broadcom Corporation
++ * Copyright (C) 2014-2015 Broadcom Corporation
+ * Copyright 2014 Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or
+@@ -30,9 +30,10 @@
+
+ /* Name of device node property defining secondary boot register location */
+ #define OF_SECONDARY_BOOT "secondary-boot-reg"
++#define MPIDR_CPUID_BITMASK 0x3
+
+ /* I/O address of register used to coordinate secondary core startup */
+-static u32 secondary_boot;
++static u32 secondary_boot_addr;
+
+ /*
+ * Enable the Cortex A9 Snoop Control Unit
+@@ -78,44 +79,68 @@ static int __init scu_a9_enable(void)
+ static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
+ {
+ static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
+- struct device_node *node;
++ struct device_node *cpus_node = NULL;
++ struct device_node *cpu_node = NULL;
+ int ret;
+
+- BUG_ON(secondary_boot); /* We're called only once */
+-
+ /*
+ * This function is only called via smp_ops->smp_prepare_cpu().
+ * That only happens if a "/cpus" device tree node exists
+ * and has an "enable-method" property that selects the SMP
+ * operations defined herein.
+ */
+- node = of_find_node_by_path("/cpus");
+- BUG_ON(!node);
+-
+- /*
+- * Our secondary enable method requires a "secondary-boot-reg"
+- * property to specify a register address used to request the
+- * ROM code boot a secondary code. If we have any trouble
+- * getting this we fall back to uniprocessor mode.
+- */
+- if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) {
+- pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
+- node->name);
+- ret = -ENOENT; /* Arrange to disable SMP */
+- goto out;
++ cpus_node = of_find_node_by_path("/cpus");
++ if (!cpus_node)
++ return;
++
++ for_each_child_of_node(cpus_node, cpu_node) {
++ u32 cpuid;
++
++ if (of_node_cmp(cpu_node->type, "cpu"))
++ continue;
++
++ if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
++ pr_debug("%s: missing reg property\n",
++ cpu_node->full_name);
++ ret = -ENOENT;
++ goto out;
++ }
++
++ /*
++ * "secondary-boot-reg" property should be defined only
++ * for secondary cpu
++ */
++ if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
++ /*
++ * Our secondary enable method requires a
++ * "secondary-boot-reg" property to specify a register
++ * address used to request the ROM code boot a secondary
++ * core. If we have any trouble getting this we fall
++ * back to uniprocessor mode.
++ */
++ if (of_property_read_u32(cpu_node,
++ OF_SECONDARY_BOOT,
++ &secondary_boot_addr)) {
++ pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
++ cpu_node->name);
++ ret = -ENOENT;
++ goto out;
++ }
++ }
+ }
+
+ /*
+- * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
++ * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
+ * returned, the SoC reported a uniprocessor configuration.
+ * We bail on any other error.
+ */
+ ret = scu_a9_enable();
+ out:
+- of_node_put(node);
++ of_node_put(cpu_node);
++ of_node_put(cpus_node);
++
+ if (ret) {
+ /* Update the CPU present map to reflect uniprocessor mode */
+- BUG_ON(ret != -ENOENT);
+ pr_warn("disabling SMP\n");
+ init_cpu_present(&only_cpu_0);
+ }
+@@ -139,7 +164,7 @@ out:
+ * - Wait for the secondary boot register to be re-written, which
+ * indicates the secondary core has started.
+ */
+-static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
++static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
+ {
+ void __iomem *boot_reg;
+ phys_addr_t boot_func;
+@@ -154,15 +179,16 @@ static int bcm_boot_secondary(unsigned i
+ return -EINVAL;
+ }
+
+- if (!secondary_boot) {
++ if (!secondary_boot_addr) {
+ pr_err("required secondary boot register not specified\n");
+ return -EINVAL;
+ }
+
+- boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32));
++ boot_reg = ioremap_nocache(
++ (phys_addr_t)secondary_boot_addr, sizeof(u32));
+ if (!boot_reg) {
+ pr_err("unable to map boot register for cpu %u\n", cpu_id);
+- return -ENOSYS;
++ return -ENOMEM;
+ }
+
+ /*
+@@ -191,12 +217,12 @@ static int bcm_boot_secondary(unsigned i
+
+ pr_err("timeout waiting for cpu %u to start\n", cpu_id);
+
+- return -ENOSYS;
++ return -ENXIO;
+ }
+
+ static struct smp_operations bcm_smp_ops __initdata = {
+ .smp_prepare_cpus = bcm_smp_prepare_cpus,
+- .smp_boot_secondary = bcm_boot_secondary,
++ .smp_boot_secondary = kona_boot_secondary,
+ };
+ CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
+ &bcm_smp_ops);
diff --git a/target/linux/bcm53xx/patches-4.4/133-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch b/target/linux/bcm53xx/patches-4.4/133-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch
new file mode 100644
index 0000000000..75db188ca2
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/133-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch
@@ -0,0 +1,560 @@
+From e99fb6d01cddf38cffc11655aba4a96a981d604e Mon Sep 17 00:00:00 2001
+From: Kapil Hali <kapilh@broadcom.com>
+Date: Wed, 25 Nov 2015 13:25:55 -0500
+Subject: [PATCH 133/134] ARM: BCM: Add SMP support for Broadcom NSP
+
+Add SMP support for Broadcom's Northstar Plus SoC
+cpu enable method. This changes also consolidates
+iProc family's - BCM NSP and BCM Kona, platform
+SMP handling in a common file.
+
+Northstar Plus SoC is based on ARM Cortex-A9
+revision r3p0 which requires configuration for ARM
+Errata 764369 for SMP. This change adds the needed
+configuration option.
+
+Signed-off-by: Kapil Hali <kapilh@broadcom.com>
+---
+ arch/arm/mach-bcm/Kconfig | 2 +
+ arch/arm/mach-bcm/Makefile | 8 +-
+ arch/arm/mach-bcm/kona_smp.c | 228 ----------------------------------
+ arch/arm/mach-bcm/platsmp.c | 290 +++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 298 insertions(+), 230 deletions(-)
+ delete mode 100644 arch/arm/mach-bcm/kona_smp.c
+ create mode 100644 arch/arm/mach-bcm/platsmp.c
+
+--- a/arch/arm/mach-bcm/Makefile
++++ b/arch/arm/mach-bcm/Makefile
+@@ -23,7 +23,7 @@ obj-$(CONFIG_ARCH_BCM_281XX) += board_bc
+ obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o
+
+ # BCM281XX and BCM21664 SMP support
+-obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o
++obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o
+
+ # BCM281XX and BCM21664 L2 cache control
+ obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
+--- a/arch/arm/mach-bcm/kona_smp.c
++++ /dev/null
+@@ -1,228 +0,0 @@
+-/*
+- * Copyright (C) 2014-2015 Broadcom Corporation
+- * Copyright 2014 Linaro Limited
+- *
+- * This program is free software; you can redistribute it and/or
+- * modify it under the terms of the GNU General Public License as
+- * published by the Free Software Foundation version 2.
+- *
+- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+- * kind, whether express or implied; without even the implied warranty
+- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+- * GNU General Public License for more details.
+- */
+-
+-#include <linux/init.h>
+-#include <linux/errno.h>
+-#include <linux/io.h>
+-#include <linux/of.h>
+-#include <linux/sched.h>
+-
+-#include <asm/smp.h>
+-#include <asm/smp_plat.h>
+-#include <asm/smp_scu.h>
+-
+-/* Size of mapped Cortex A9 SCU address space */
+-#define CORTEX_A9_SCU_SIZE 0x58
+-
+-#define SECONDARY_TIMEOUT_NS NSEC_PER_MSEC /* 1 msec (in nanoseconds) */
+-#define BOOT_ADDR_CPUID_MASK 0x3
+-
+-/* Name of device node property defining secondary boot register location */
+-#define OF_SECONDARY_BOOT "secondary-boot-reg"
+-#define MPIDR_CPUID_BITMASK 0x3
+-
+-/* I/O address of register used to coordinate secondary core startup */
+-static u32 secondary_boot_addr;
+-
+-/*
+- * Enable the Cortex A9 Snoop Control Unit
+- *
+- * By the time this is called we already know there are multiple
+- * cores present. We assume we're running on a Cortex A9 processor,
+- * so any trouble getting the base address register or getting the
+- * SCU base is a problem.
+- *
+- * Return 0 if successful or an error code otherwise.
+- */
+-static int __init scu_a9_enable(void)
+-{
+- unsigned long config_base;
+- void __iomem *scu_base;
+-
+- if (!scu_a9_has_base()) {
+- pr_err("no configuration base address register!\n");
+- return -ENXIO;
+- }
+-
+- /* Config base address register value is zero for uniprocessor */
+- config_base = scu_a9_get_base();
+- if (!config_base) {
+- pr_err("hardware reports only one core\n");
+- return -ENOENT;
+- }
+-
+- scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
+- if (!scu_base) {
+- pr_err("failed to remap config base (%lu/%u) for SCU\n",
+- config_base, CORTEX_A9_SCU_SIZE);
+- return -ENOMEM;
+- }
+-
+- scu_enable(scu_base);
+-
+- iounmap(scu_base); /* That's the last we'll need of this */
+-
+- return 0;
+-}
+-
+-static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
+-{
+- static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
+- struct device_node *cpus_node = NULL;
+- struct device_node *cpu_node = NULL;
+- int ret;
+-
+- /*
+- * This function is only called via smp_ops->smp_prepare_cpu().
+- * That only happens if a "/cpus" device tree node exists
+- * and has an "enable-method" property that selects the SMP
+- * operations defined herein.
+- */
+- cpus_node = of_find_node_by_path("/cpus");
+- if (!cpus_node)
+- return;
+-
+- for_each_child_of_node(cpus_node, cpu_node) {
+- u32 cpuid;
+-
+- if (of_node_cmp(cpu_node->type, "cpu"))
+- continue;
+-
+- if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
+- pr_debug("%s: missing reg property\n",
+- cpu_node->full_name);
+- ret = -ENOENT;
+- goto out;
+- }
+-
+- /*
+- * "secondary-boot-reg" property should be defined only
+- * for secondary cpu
+- */
+- if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
+- /*
+- * Our secondary enable method requires a
+- * "secondary-boot-reg" property to specify a register
+- * address used to request the ROM code boot a secondary
+- * core. If we have any trouble getting this we fall
+- * back to uniprocessor mode.
+- */
+- if (of_property_read_u32(cpu_node,
+- OF_SECONDARY_BOOT,
+- &secondary_boot_addr)) {
+- pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
+- cpu_node->name);
+- ret = -ENOENT;
+- goto out;
+- }
+- }
+- }
+-
+- /*
+- * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
+- * returned, the SoC reported a uniprocessor configuration.
+- * We bail on any other error.
+- */
+- ret = scu_a9_enable();
+-out:
+- of_node_put(cpu_node);
+- of_node_put(cpus_node);
+-
+- if (ret) {
+- /* Update the CPU present map to reflect uniprocessor mode */
+- pr_warn("disabling SMP\n");
+- init_cpu_present(&only_cpu_0);
+- }
+-}
+-
+-/*
+- * The ROM code has the secondary cores looping, waiting for an event.
+- * When an event occurs each core examines the bottom two bits of the
+- * secondary boot register. When a core finds those bits contain its
+- * own core id, it performs initialization, including computing its boot
+- * address by clearing the boot register value's bottom two bits. The
+- * core signals that it is beginning its execution by writing its boot
+- * address back to the secondary boot register, and finally jumps to
+- * that address.
+- *
+- * So to start a core executing we need to:
+- * - Encode the (hardware) CPU id with the bottom bits of the secondary
+- * start address.
+- * - Write that value into the secondary boot register.
+- * - Generate an event to wake up the secondary CPU(s).
+- * - Wait for the secondary boot register to be re-written, which
+- * indicates the secondary core has started.
+- */
+-static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
+-{
+- void __iomem *boot_reg;
+- phys_addr_t boot_func;
+- u64 start_clock;
+- u32 cpu_id;
+- u32 boot_val;
+- bool timeout = false;
+-
+- cpu_id = cpu_logical_map(cpu);
+- if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
+- pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK);
+- return -EINVAL;
+- }
+-
+- if (!secondary_boot_addr) {
+- pr_err("required secondary boot register not specified\n");
+- return -EINVAL;
+- }
+-
+- boot_reg = ioremap_nocache(
+- (phys_addr_t)secondary_boot_addr, sizeof(u32));
+- if (!boot_reg) {
+- pr_err("unable to map boot register for cpu %u\n", cpu_id);
+- return -ENOMEM;
+- }
+-
+- /*
+- * Secondary cores will start in secondary_startup(),
+- * defined in "arch/arm/kernel/head.S"
+- */
+- boot_func = virt_to_phys(secondary_startup);
+- BUG_ON(boot_func & BOOT_ADDR_CPUID_MASK);
+- BUG_ON(boot_func > (phys_addr_t)U32_MAX);
+-
+- /* The core to start is encoded in the low bits */
+- boot_val = (u32)boot_func | cpu_id;
+- writel_relaxed(boot_val, boot_reg);
+-
+- sev();
+-
+- /* The low bits will be cleared once the core has started */
+- start_clock = local_clock();
+- while (!timeout && readl_relaxed(boot_reg) == boot_val)
+- timeout = local_clock() - start_clock > SECONDARY_TIMEOUT_NS;
+-
+- iounmap(boot_reg);
+-
+- if (!timeout)
+- return 0;
+-
+- pr_err("timeout waiting for cpu %u to start\n", cpu_id);
+-
+- return -ENXIO;
+-}
+-
+-static struct smp_operations bcm_smp_ops __initdata = {
+- .smp_prepare_cpus = bcm_smp_prepare_cpus,
+- .smp_boot_secondary = kona_boot_secondary,
+-};
+-CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
+- &bcm_smp_ops);
+--- /dev/null
++++ b/arch/arm/mach-bcm/platsmp.c
+@@ -0,0 +1,290 @@
++/*
++ * Copyright (C) 2014-2015 Broadcom Corporation
++ * Copyright 2014 Linaro Limited
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation version 2.
++ *
++ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
++ * kind, whether express or implied; without even the implied warranty
++ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/cpumask.h>
++#include <linux/delay.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/io.h>
++#include <linux/jiffies.h>
++#include <linux/of.h>
++#include <linux/sched.h>
++#include <linux/smp.h>
++
++#include <asm/cacheflush.h>
++#include <asm/smp.h>
++#include <asm/smp_plat.h>
++#include <asm/smp_scu.h>
++
++/* Size of mapped Cortex A9 SCU address space */
++#define CORTEX_A9_SCU_SIZE 0x58
++
++#define SECONDARY_TIMEOUT_NS NSEC_PER_MSEC /* 1 msec (in nanoseconds) */
++#define BOOT_ADDR_CPUID_MASK 0x3
++
++/* Name of device node property defining secondary boot register location */
++#define OF_SECONDARY_BOOT "secondary-boot-reg"
++#define MPIDR_CPUID_BITMASK 0x3
++
++/* I/O address of register used to coordinate secondary core startup */
++static u32 secondary_boot_addr;
++
++/*
++ * Enable the Cortex A9 Snoop Control Unit
++ *
++ * By the time this is called we already know there are multiple
++ * cores present. We assume we're running on a Cortex A9 processor,
++ * so any trouble getting the base address register or getting the
++ * SCU base is a problem.
++ *
++ * Return 0 if successful or an error code otherwise.
++ */
++static int __init scu_a9_enable(void)
++{
++ unsigned long config_base;
++ void __iomem *scu_base;
++
++ if (!scu_a9_has_base()) {
++ pr_err("no configuration base address register!\n");
++ return -ENXIO;
++ }
++
++ /* Config base address register value is zero for uniprocessor */
++ config_base = scu_a9_get_base();
++ if (!config_base) {
++ pr_err("hardware reports only one core\n");
++ return -ENOENT;
++ }
++
++ scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
++ if (!scu_base) {
++ pr_err("failed to remap config base (%lu/%u) for SCU\n",
++ config_base, CORTEX_A9_SCU_SIZE);
++ return -ENOMEM;
++ }
++
++ scu_enable(scu_base);
++
++ iounmap(scu_base); /* That's the last we'll need of this */
++
++ return 0;
++}
++
++static int nsp_write_lut(void)
++{
++ void __iomem *sku_rom_lut;
++ phys_addr_t secondary_startup_phy;
++
++ if (!secondary_boot_addr) {
++ pr_warn("required secondary boot register not specified\n");
++ return -EINVAL;
++ }
++
++ sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot_addr,
++ sizeof(secondary_boot_addr));
++ if (!sku_rom_lut) {
++ pr_warn("unable to ioremap SKU-ROM LUT register\n");
++ return -ENOMEM;
++ }
++
++ secondary_startup_phy = virt_to_phys(secondary_startup);
++ BUG_ON(secondary_startup_phy > (phys_addr_t)U32_MAX);
++
++ writel_relaxed(secondary_startup_phy, sku_rom_lut);
++
++ /* Ensure the write is visible to the secondary core */
++ smp_wmb();
++
++ iounmap(sku_rom_lut);
++
++ return 0;
++}
++
++static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
++{
++ static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
++ struct device_node *cpus_node = NULL;
++ struct device_node *cpu_node = NULL;
++ int ret;
++
++ /*
++ * This function is only called via smp_ops->smp_prepare_cpu().
++ * That only happens if a "/cpus" device tree node exists
++ * and has an "enable-method" property that selects the SMP
++ * operations defined herein.
++ */
++ cpus_node = of_find_node_by_path("/cpus");
++ if (!cpus_node)
++ return;
++
++ for_each_child_of_node(cpus_node, cpu_node) {
++ u32 cpuid;
++
++ if (of_node_cmp(cpu_node->type, "cpu"))
++ continue;
++
++ if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
++ pr_debug("%s: missing reg property\n",
++ cpu_node->full_name);
++ ret = -ENOENT;
++ goto out;
++ }
++
++ /*
++ * "secondary-boot-reg" property should be defined only
++ * for secondary cpu
++ */
++ if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
++ /*
++ * Our secondary enable method requires a
++ * "secondary-boot-reg" property to specify a register
++ * address used to request the ROM code boot a secondary
++ * core. If we have any trouble getting this we fall
++ * back to uniprocessor mode.
++ */
++ if (of_property_read_u32(cpu_node,
++ OF_SECONDARY_BOOT,
++ &secondary_boot_addr)) {
++ pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
++ cpu_node->name);
++ ret = -ENOENT;
++ goto out;
++ }
++ }
++ }
++
++ /*
++ * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
++ * returned, the SoC reported a uniprocessor configuration.
++ * We bail on any other error.
++ */
++ ret = scu_a9_enable();
++out:
++ of_node_put(cpu_node);
++ of_node_put(cpus_node);
++
++ if (ret) {
++ /* Update the CPU present map to reflect uniprocessor mode */
++ pr_warn("disabling SMP\n");
++ init_cpu_present(&only_cpu_0);
++ }
++}
++
++/*
++ * The ROM code has the secondary cores looping, waiting for an event.
++ * When an event occurs each core examines the bottom two bits of the
++ * secondary boot register. When a core finds those bits contain its
++ * own core id, it performs initialization, including computing its boot
++ * address by clearing the boot register value's bottom two bits. The
++ * core signals that it is beginning its execution by writing its boot
++ * address back to the secondary boot register, and finally jumps to
++ * that address.
++ *
++ * So to start a core executing we need to:
++ * - Encode the (hardware) CPU id with the bottom bits of the secondary
++ * start address.
++ * - Write that value into the secondary boot register.
++ * - Generate an event to wake up the secondary CPU(s).
++ * - Wait for the secondary boot register to be re-written, which
++ * indicates the secondary core has started.
++ */
++static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
++{
++ void __iomem *boot_reg;
++ phys_addr_t boot_func;
++ u64 start_clock;
++ u32 cpu_id;
++ u32 boot_val;
++ bool timeout = false;
++
++ cpu_id = cpu_logical_map(cpu);
++ if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
++ pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK);
++ return -EINVAL;
++ }
++
++ if (!secondary_boot_addr) {
++ pr_err("required secondary boot register not specified\n");
++ return -EINVAL;
++ }
++
++ boot_reg = ioremap_nocache(
++ (phys_addr_t)secondary_boot_addr, sizeof(u32));
++ if (!boot_reg) {
++ pr_err("unable to map boot register for cpu %u\n", cpu_id);
++ return -ENOMEM;
++ }
++
++ /*
++ * Secondary cores will start in secondary_startup(),
++ * defined in "arch/arm/kernel/head.S"
++ */
++ boot_func = virt_to_phys(secondary_startup);
++ BUG_ON(boot_func & BOOT_ADDR_CPUID_MASK);
++ BUG_ON(boot_func > (phys_addr_t)U32_MAX);
++
++ /* The core to start is encoded in the low bits */
++ boot_val = (u32)boot_func | cpu_id;
++ writel_relaxed(boot_val, boot_reg);
++
++ sev();
++
++ /* The low bits will be cleared once the core has started */
++ start_clock = local_clock();
++ while (!timeout && readl_relaxed(boot_reg) == boot_val)
++ timeout = local_clock() - start_clock > SECONDARY_TIMEOUT_NS;
++
++ iounmap(boot_reg);
++
++ if (!timeout)
++ return 0;
++
++ pr_err("timeout waiting for cpu %u to start\n", cpu_id);
++
++ return -ENXIO;
++}
++
++static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
++{
++ int ret;
++
++ /*
++ * After wake up, secondary core branches to the startup
++ * address programmed at SKU ROM LUT location.
++ */
++ ret = nsp_write_lut();
++ if (ret) {
++ pr_err("unable to write startup addr to SKU ROM LUT\n");
++ goto out;
++ }
++
++ /* Send a CPU wakeup interrupt to the secondary core */
++ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
++
++out:
++ return ret;
++}
++
++static struct smp_operations bcm_smp_ops __initdata = {
++ .smp_prepare_cpus = bcm_smp_prepare_cpus,
++ .smp_boot_secondary = kona_boot_secondary,
++};
++CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
++ &bcm_smp_ops);
++
++struct smp_operations nsp_smp_ops __initdata = {
++ .smp_prepare_cpus = bcm_smp_prepare_cpus,
++ .smp_boot_secondary = nsp_boot_secondary,
++};
++CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
diff --git a/target/linux/bcm53xx/patches-4.4/134-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch b/target/linux/bcm53xx/patches-4.4/134-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch
new file mode 100644
index 0000000000..3c8aed03b2
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/134-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch
@@ -0,0 +1,57 @@
+From 16e1bf7dde22ee22a331aabf824cc31a6794a4cb Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Thu, 15 Oct 2015 14:09:10 -0400
+Subject: [PATCH 134/134] ARM: BCM: Add SMP support for Broadcom 4708
+
+Add SMP support for Broadcom's 4708 SoCs.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
+Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
+Signed-off-by: Kapil Hali <kapilh@broadcom.com>
+---
+ arch/arm/boot/dts/bcm4708.dtsi | 2 ++
+ arch/arm/mach-bcm/Kconfig | 1 +
+ arch/arm/mach-bcm/Makefile | 3 +++
+ 3 files changed, 6 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4708.dtsi
++++ b/arch/arm/boot/dts/bcm4708.dtsi
+@@ -15,6 +15,7 @@
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
++ enable-method = "brcm,bcm-nsp-smp";
+
+ cpu@0 {
+ device_type = "cpu";
+@@ -27,6 +28,7 @@
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
++ secondary-boot-reg = <0xffff0400>;
+ reg = <0x1>;
+ };
+ };
+--- a/arch/arm/mach-bcm/Kconfig
++++ b/arch/arm/mach-bcm/Kconfig
+@@ -55,6 +55,7 @@ config ARCH_BCM_5301X
+ select ARM_ERRATA_754322
+ select ARM_ERRATA_775420
+ select ARM_ERRATA_764369 if SMP
++ select HAVE_SMP
+
+ help
+ Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
+--- a/arch/arm/mach-bcm/Makefile
++++ b/arch/arm/mach-bcm/Makefile
+@@ -39,6 +39,9 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2
+
+ # BCM5301X
+ obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
++ifeq ($(CONFIG_ARCH_BCM_5301X),y)
++obj-$(CONFIG_SMP) += platsmp.o
++endif
+
+ # BCM63XXx
+ ifeq ($(CONFIG_ARCH_BCM_63XX),y)
diff --git a/target/linux/bcm53xx/patches-4.4/150-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch b/target/linux/bcm53xx/patches-4.4/150-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch
new file mode 100644
index 0000000000..7d6949f234
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/150-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch
@@ -0,0 +1,29 @@
+From d85a955118c8d8679d4f746fe2189c172d7c365f Mon Sep 17 00:00:00 2001
+From: Ray Jui <rjui@broadcom.com>
+Date: Mon, 16 Nov 2015 17:18:05 -0800
+Subject: [PATCH 150/154] PCI: iproc: Update iProc PCIe device tree binding
+
+Add a new compatible string "brcm,iproc-pcie-paxc", for PAXC based iProc
+PCIe root complex. A PAXC based PCIe root complex is connected to
+emulated endpoint devices internal to the ASIC
+
+Signed-off-by: Ray Jui <rjui@broadcom.com>
+Reviewed-by: Scott Branden <sbranden@broadcom.com>
+---
+ Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
++++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+@@ -1,7 +1,10 @@
+ * Broadcom iProc PCIe controller with the platform bus interface
+
+ Required properties:
+-- compatible: Must be "brcm,iproc-pcie"
++- compatible: Must be "brcm,iproc-pcie" for PAXB, or "brcm,iproc-pcie-paxc"
++ for PAXC. PAXB based root complex is used for external endpoint devices.
++ PAXC based root complex is connected to emulated endpoint devices
++ internal to the ASIC
+ - reg: base address and length of the PCIe controller I/O register space
+ - #interrupt-cells: set to <1>
+ - interrupt-map-mask and interrupt-map, standard PCI properties to define the
diff --git a/target/linux/bcm53xx/patches-4.4/151-PCI-iproc-Add-PAXC-interface-support.patch b/target/linux/bcm53xx/patches-4.4/151-PCI-iproc-Add-PAXC-interface-support.patch
new file mode 100644
index 0000000000..9b7b762241
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/151-PCI-iproc-Add-PAXC-interface-support.patch
@@ -0,0 +1,428 @@
+From a13fc4733b25d6dad6ec1826f09225c69ee21e3a Mon Sep 17 00:00:00 2001
+From: Ray Jui <rjui@broadcom.com>
+Date: Mon, 16 Nov 2015 17:41:43 -0800
+Subject: [PATCH 151/154] PCI: iproc: Add PAXC interface support
+
+Traditionally, all iProc PCIe root complexes use PAXB based wrapper,
+with an integrated on-chip Serdes to support external endpoint devices.
+On newer iProc platforms, a PAXC based wrapper is introduced, for
+connection with internally emulated PCIe endpoint devices in the ASIC
+
+This patch adds support for PAXC based iProc PCIe root complex in the
+iProc PCIe core driver. This change fators out common logic between
+PAXB and PAXC, and use tables to store register offsets that are
+different between PAXB and PAXC. This allows the driver to be scaled to
+support subsequent PAXC revisions in the future
+
+Signed-off-by: Ray Jui <rjui@broadcom.com>
+Reviewed-by: Scott Branden <sbranden@broadcom.com>
+---
+ drivers/pci/host/pcie-iproc-platform.c | 24 +++-
+ drivers/pci/host/pcie-iproc.c | 202 +++++++++++++++++++++++++++------
+ drivers/pci/host/pcie-iproc.h | 19 ++++
+ 3 files changed, 205 insertions(+), 40 deletions(-)
+
+--- a/drivers/pci/host/pcie-iproc-platform.c
++++ b/drivers/pci/host/pcie-iproc-platform.c
+@@ -26,8 +26,21 @@
+
+ #include "pcie-iproc.h"
+
++static const struct of_device_id iproc_pcie_of_match_table[] = {
++ {
++ .compatible = "brcm,iproc-pcie",
++ .data = (int *)IPROC_PCIE_PAXB,
++ }, {
++ .compatible = "brcm,iproc-pcie-paxc",
++ .data = (int *)IPROC_PCIE_PAXC,
++ },
++ { /* sentinel */ }
++};
++MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table);
++
+ static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
+ {
++ const struct of_device_id *of_id;
+ struct iproc_pcie *pcie;
+ struct device_node *np = pdev->dev.of_node;
+ struct resource reg;
+@@ -35,11 +48,16 @@ static int iproc_pcie_pltfm_probe(struct
+ LIST_HEAD(res);
+ int ret;
+
++ of_id = of_match_device(iproc_pcie_of_match_table, &pdev->dev);
++ if (!of_id)
++ return -EINVAL;
++
+ pcie = devm_kzalloc(&pdev->dev, sizeof(struct iproc_pcie), GFP_KERNEL);
+ if (!pcie)
+ return -ENOMEM;
+
+ pcie->dev = &pdev->dev;
++ pcie->type = (enum iproc_pcie_type)of_id->data;
+ platform_set_drvdata(pdev, pcie);
+
+ ret = of_address_to_resource(np, 0, &reg);
+@@ -114,12 +132,6 @@ static int iproc_pcie_pltfm_remove(struc
+ return iproc_pcie_remove(pcie);
+ }
+
+-static const struct of_device_id iproc_pcie_of_match_table[] = {
+- { .compatible = "brcm,iproc-pcie", },
+- { /* sentinel */ }
+-};
+-MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table);
+-
+ static struct platform_driver iproc_pcie_pltfm_driver = {
+ .driver = {
+ .name = "iproc-pcie",
+--- a/drivers/pci/host/pcie-iproc.c
++++ b/drivers/pci/host/pcie-iproc.c
+@@ -30,20 +30,16 @@
+
+ #include "pcie-iproc.h"
+
+-#define CLK_CONTROL_OFFSET 0x000
+ #define EP_PERST_SOURCE_SELECT_SHIFT 2
+ #define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT)
+ #define EP_MODE_SURVIVE_PERST_SHIFT 1
+ #define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT)
+ #define RC_PCIE_RST_OUTPUT_SHIFT 0
+ #define RC_PCIE_RST_OUTPUT BIT(RC_PCIE_RST_OUTPUT_SHIFT)
++#define PAXC_RESET_MASK 0x7f
+
+-#define CFG_IND_ADDR_OFFSET 0x120
+ #define CFG_IND_ADDR_MASK 0x00001ffc
+
+-#define CFG_IND_DATA_OFFSET 0x124
+-
+-#define CFG_ADDR_OFFSET 0x1f8
+ #define CFG_ADDR_BUS_NUM_SHIFT 20
+ #define CFG_ADDR_BUS_NUM_MASK 0x0ff00000
+ #define CFG_ADDR_DEV_NUM_SHIFT 15
+@@ -55,12 +51,8 @@
+ #define CFG_ADDR_CFG_TYPE_SHIFT 0
+ #define CFG_ADDR_CFG_TYPE_MASK 0x00000003
+
+-#define CFG_DATA_OFFSET 0x1fc
+-
+-#define SYS_RC_INTX_EN 0x330
+ #define SYS_RC_INTX_MASK 0xf
+
+-#define PCIE_LINK_STATUS_OFFSET 0xf0c
+ #define PCIE_PHYLINKUP_SHIFT 3
+ #define PCIE_PHYLINKUP BIT(PCIE_PHYLINKUP_SHIFT)
+ #define PCIE_DL_ACTIVE_SHIFT 2
+@@ -71,12 +63,54 @@
+ #define OARR_SIZE_CFG_SHIFT 1
+ #define OARR_SIZE_CFG BIT(OARR_SIZE_CFG_SHIFT)
+
+-#define OARR_LO(window) (0xd20 + (window) * 8)
+-#define OARR_HI(window) (0xd24 + (window) * 8)
+-#define OMAP_LO(window) (0xd40 + (window) * 8)
+-#define OMAP_HI(window) (0xd44 + (window) * 8)
+-
+ #define MAX_NUM_OB_WINDOWS 2
++#define MAX_NUM_PAXC_PF 4
++
++#define IPROC_PCIE_REG_INVALID 0xffff
++
++enum iproc_pcie_reg {
++ IPROC_PCIE_CLK_CTRL = 0,
++ IPROC_PCIE_CFG_IND_ADDR,
++ IPROC_PCIE_CFG_IND_DATA,
++ IPROC_PCIE_CFG_ADDR,
++ IPROC_PCIE_CFG_DATA,
++ IPROC_PCIE_INTX_EN,
++ IPROC_PCIE_OARR_LO,
++ IPROC_PCIE_OARR_HI,
++ IPROC_PCIE_OMAP_LO,
++ IPROC_PCIE_OMAP_HI,
++ IPROC_PCIE_LINK_STATUS,
++};
++
++/* iProc PCIe PAXB registers */
++static const u16 iproc_pcie_reg_paxb[] = {
++ [IPROC_PCIE_CLK_CTRL] = 0x000,
++ [IPROC_PCIE_CFG_IND_ADDR] = 0x120,
++ [IPROC_PCIE_CFG_IND_DATA] = 0x124,
++ [IPROC_PCIE_CFG_ADDR] = 0x1f8,
++ [IPROC_PCIE_CFG_DATA] = 0x1fc,
++ [IPROC_PCIE_INTX_EN] = 0x330,
++ [IPROC_PCIE_OARR_LO] = 0xd20,
++ [IPROC_PCIE_OARR_HI] = 0xd24,
++ [IPROC_PCIE_OMAP_LO] = 0xd40,
++ [IPROC_PCIE_OMAP_HI] = 0xd44,
++ [IPROC_PCIE_LINK_STATUS] = 0xf0c,
++};
++
++/* iProc PCIe PAXC v1 registers */
++static const u16 iproc_pcie_reg_paxc[] = {
++ [IPROC_PCIE_CLK_CTRL] = 0x000,
++ [IPROC_PCIE_CFG_IND_ADDR] = 0x1f0,
++ [IPROC_PCIE_CFG_IND_DATA] = 0x1f4,
++ [IPROC_PCIE_CFG_ADDR] = 0x1f8,
++ [IPROC_PCIE_CFG_DATA] = 0x1fc,
++ [IPROC_PCIE_INTX_EN] = IPROC_PCIE_REG_INVALID,
++ [IPROC_PCIE_OARR_LO] = IPROC_PCIE_REG_INVALID,
++ [IPROC_PCIE_OARR_HI] = IPROC_PCIE_REG_INVALID,
++ [IPROC_PCIE_OMAP_LO] = IPROC_PCIE_REG_INVALID,
++ [IPROC_PCIE_OMAP_HI] = IPROC_PCIE_REG_INVALID,
++ [IPROC_PCIE_LINK_STATUS] = IPROC_PCIE_REG_INVALID,
++};
+
+ static inline struct iproc_pcie *iproc_data(struct pci_bus *bus)
+ {
+@@ -91,6 +125,65 @@ static inline struct iproc_pcie *iproc_d
+ return pcie;
+ }
+
++static inline bool iproc_pcie_reg_is_invalid(u16 reg_offset)
++{
++ return !!(reg_offset == IPROC_PCIE_REG_INVALID);
++}
++
++static inline u16 iproc_pcie_reg_offset(struct iproc_pcie *pcie,
++ enum iproc_pcie_reg reg)
++{
++ return pcie->reg_offsets[reg];
++}
++
++static inline u32 iproc_pcie_read_reg(struct iproc_pcie *pcie,
++ enum iproc_pcie_reg reg)
++{
++ u16 offset = iproc_pcie_reg_offset(pcie, reg);
++
++ if (iproc_pcie_reg_is_invalid(offset))
++ return 0;
++
++ return readl(pcie->base + offset);
++}
++
++static inline void iproc_pcie_write_reg(struct iproc_pcie *pcie,
++ enum iproc_pcie_reg reg, u32 val)
++{
++ u16 offset = iproc_pcie_reg_offset(pcie, reg);
++
++ if (iproc_pcie_reg_is_invalid(offset))
++ return;
++
++ writel(val, pcie->base + offset);
++}
++
++static inline void iproc_pcie_ob_write(struct iproc_pcie *pcie,
++ enum iproc_pcie_reg reg,
++ unsigned window, u32 val)
++{
++ u16 offset = iproc_pcie_reg_offset(pcie, reg);
++
++ if (iproc_pcie_reg_is_invalid(offset))
++ return;
++
++ writel(val, pcie->base + offset + (window * 8));
++}
++
++static inline bool iproc_pcie_device_is_valid(struct iproc_pcie *pcie,
++ unsigned int slot,
++ unsigned int fn)
++{
++ if (slot > 0)
++ return false;
++
++ /* PAXC can only support limited number of functions */
++ if (pcie->type == IPROC_PCIE_PAXC && fn >= MAX_NUM_PAXC_PF)
++ return false;
++
++ return true;
++}
++
+ /**
+ * Note access to the configuration registers are protected at the higher layer
+ * by 'pci_lock' in drivers/pci/access.c
+@@ -104,28 +197,34 @@ static void __iomem *iproc_pcie_map_cfg_
+ unsigned fn = PCI_FUNC(devfn);
+ unsigned busno = bus->number;
+ u32 val;
++ u16 offset;
++
++ if (!iproc_pcie_device_is_valid(pcie, slot, fn))
++ return NULL;
+
+ /* root complex access */
+ if (busno == 0) {
+- if (slot >= 1)
++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_IND_ADDR,
++ where & CFG_IND_ADDR_MASK);
++ offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_IND_DATA);
++ if (iproc_pcie_reg_is_invalid(offset))
+ return NULL;
+- writel(where & CFG_IND_ADDR_MASK,
+- pcie->base + CFG_IND_ADDR_OFFSET);
+- return (pcie->base + CFG_IND_DATA_OFFSET);
++ else
++ return (pcie->base + offset);
+ }
+
+- if (fn > 1)
+- return NULL;
+-
+ /* EP device access */
+ val = (busno << CFG_ADDR_BUS_NUM_SHIFT) |
+ (slot << CFG_ADDR_DEV_NUM_SHIFT) |
+ (fn << CFG_ADDR_FUNC_NUM_SHIFT) |
+ (where & CFG_ADDR_REG_NUM_MASK) |
+ (1 & CFG_ADDR_CFG_TYPE_MASK);
+- writel(val, pcie->base + CFG_ADDR_OFFSET);
+-
+- return (pcie->base + CFG_DATA_OFFSET);
++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_ADDR, val);
++ offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_DATA);
++ if (iproc_pcie_reg_is_invalid(offset))
++ return NULL;
++ else
++ return (pcie->base + offset);
+ }
+
+ static struct pci_ops iproc_pcie_ops = {
+@@ -138,18 +237,29 @@ static void iproc_pcie_reset(struct ipro
+ {
+ u32 val;
+
++ if (pcie->type == IPROC_PCIE_PAXC) {
++ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL);
++ val &= ~PAXC_RESET_MASK;
++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
++ udelay(100);
++ val |= PAXC_RESET_MASK;
++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
++ udelay(100);
++ return;
++ }
++
+ /*
+ * Select perst_b signal as reset source. Put the device into reset,
+ * and then bring it out of reset
+ */
+- val = readl(pcie->base + CLK_CONTROL_OFFSET);
++ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL);
+ val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST &
+ ~RC_PCIE_RST_OUTPUT;
+- writel(val, pcie->base + CLK_CONTROL_OFFSET);
++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
+ udelay(250);
+
+ val |= RC_PCIE_RST_OUTPUT;
+- writel(val, pcie->base + CLK_CONTROL_OFFSET);
++ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
+ msleep(100);
+ }
+
+@@ -160,7 +270,14 @@ static int iproc_pcie_check_link(struct
+ u16 pos, link_status;
+ bool link_is_active = false;
+
+- val = readl(pcie->base + PCIE_LINK_STATUS_OFFSET);
++ /*
++ * PAXC connects to emulated endpoint devices directly and does not
++ * have a Serdes. Therefore skip the link detection logic here
++ */
++ if (pcie->type == IPROC_PCIE_PAXC)
++ return 0;
++
++ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_LINK_STATUS);
+ if (!(val & PCIE_PHYLINKUP) || !(val & PCIE_DL_ACTIVE)) {
+ dev_err(pcie->dev, "PHY or data link is INACTIVE!\n");
+ return -ENODEV;
+@@ -221,7 +338,7 @@ static int iproc_pcie_check_link(struct
+
+ static void iproc_pcie_enable(struct iproc_pcie *pcie)
+ {
+- writel(SYS_RC_INTX_MASK, pcie->base + SYS_RC_INTX_EN);
++ iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, SYS_RC_INTX_MASK);
+ }
+
+ /**
+@@ -272,11 +389,15 @@ static int iproc_pcie_setup_ob(struct ip
+ axi_addr -= ob->axi_offset;
+
+ for (i = 0; i < MAX_NUM_OB_WINDOWS; i++) {
+- writel(lower_32_bits(axi_addr) | OARR_VALID |
+- (ob->set_oarr_size ? 1 : 0), pcie->base + OARR_LO(i));
+- writel(upper_32_bits(axi_addr), pcie->base + OARR_HI(i));
+- writel(lower_32_bits(pci_addr), pcie->base + OMAP_LO(i));
+- writel(upper_32_bits(pci_addr), pcie->base + OMAP_HI(i));
++ iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_LO, i,
++ lower_32_bits(axi_addr) | OARR_VALID |
++ (ob->set_oarr_size ? 1 : 0));
++ iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_HI, i,
++ upper_32_bits(axi_addr));
++ iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_LO, i,
++ lower_32_bits(pci_addr));
++ iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_HI, i,
++ upper_32_bits(pci_addr));
+
+ size -= ob->window_size;
+ if (size == 0)
+@@ -340,6 +461,19 @@ int iproc_pcie_setup(struct iproc_pcie *
+ goto err_exit_phy;
+ }
+
++ switch (pcie->type) {
++ case IPROC_PCIE_PAXB:
++ pcie->reg_offsets = iproc_pcie_reg_paxb;
++ break;
++ case IPROC_PCIE_PAXC:
++ pcie->reg_offsets = iproc_pcie_reg_paxc;
++ break;
++ default:
++ dev_err(pcie->dev, "incompatible iProc PCIe interface\n");
++ ret = -EINVAL;
++ goto err_power_off_phy;
++ }
++
+ iproc_pcie_reset(pcie);
+
+ if (pcie->need_ob_cfg) {
+--- a/drivers/pci/host/pcie-iproc.h
++++ b/drivers/pci/host/pcie-iproc.h
+@@ -15,6 +15,20 @@
+ #define _PCIE_IPROC_H
+
+ /**
++ * iProc PCIe interface type
++ *
++ * PAXB is the wrapper used in root complex that can be connected to an
++ * external endpoint device
++ *
++ * PAXC is the wrapper used in root complex dedicated for internal emulated
++ * endpoint devices
++ */
++enum iproc_pcie_type {
++ IPROC_PCIE_PAXB = 0,
++ IPROC_PCIE_PAXC,
++};
++
++/**
+ * iProc PCIe outbound mapping
+ * @set_oarr_size: indicates the OARR size bit needs to be set
+ * @axi_offset: offset from the AXI address to the internal address used by
+@@ -29,7 +43,10 @@ struct iproc_pcie_ob {
+
+ /**
+ * iProc PCIe device
++ *
+ * @dev: pointer to device data structure
++ * @type: iProc PCIe interface type
++ * @reg_offsets: register offsets
+ * @base: PCIe host controller I/O register base
+ * @sysdata: Per PCI controller data (ARM-specific)
+ * @root_bus: pointer to root bus
+@@ -41,6 +58,8 @@ struct iproc_pcie_ob {
+ */
+ struct iproc_pcie {
+ struct device *dev;
++ enum iproc_pcie_type type;
++ const u16 *reg_offsets;
+ void __iomem *base;
+ #ifdef CONFIG_ARM
+ struct pci_sys_data sysdata;
diff --git a/target/linux/bcm53xx/patches-4.4/152-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch b/target/linux/bcm53xx/patches-4.4/152-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch
new file mode 100644
index 0000000000..f0b0031237
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/152-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch
@@ -0,0 +1,67 @@
+From 96b40de5e36ec479dabb88500f1830a87818a809 Mon Sep 17 00:00:00 2001
+From: Ray Jui <rjui@broadcom.com>
+Date: Mon, 16 Nov 2015 17:57:33 -0800
+Subject: [PATCH 152/154] PCI: iproc: Add iProc PCIe MSI device tree binding
+
+This patch updates the iProc PCIe device tree bindings with added
+binding information for MSI
+
+Signed-off-by: Ray Jui <rjui@broadcom.com>
+Reviewed-by: Anup Patel <anup.patel@broadcom.com>
+Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
+Reviewed-by: Scott Branden <sbranden@broadcom.com>
+---
+ .../devicetree/bindings/pci/brcm,iproc-pcie.txt | 35 ++++++++++++++++++++++
+ 1 file changed, 35 insertions(+)
+
+--- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
++++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
+@@ -35,6 +35,28 @@ Optional:
+ - brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to
+ increase the outbound window size
+
++MSI support (optional):
++
++For older platforms without MSI integrated in the GIC, iProc PCIe core provides
++an event queue based MSI support. The iProc MSI uses host memories to store
++MSI posted writes in the event queues
++
++- msi-parent: Link to the device node of the MSI controller. On newer iProc
++platforms, the MSI controller may be gicv2m or gicv3-its. On older iProc
++platforms without MSI support in its interrupt controller, one may use the
++event queue based MSI support integrated within the iProc PCIe core
++
++When the iProc event queue based MSI is used, one needs to define the
++following properties in the MSI device node:
++- compatible: Must be "brcm,iproc-msi"
++- msi-controller: claims itself as an MSI controller
++- interrupt-parent: Link to its parent interrupt device
++- interrupts: List of interrupt IDs from its parent interrupt device
++
++Optional properties:
++- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
++require the interrupt enable registers to be set explicitly to enable MSI
++
+ Example:
+ pcie0: pcie@18012000 {
+ compatible = "brcm,iproc-pcie";
+@@ -61,6 +83,19 @@ Example:
+ brcm,pcie-ob-oarr-size;
+ brcm,pcie-ob-axi-offset = <0x00000000>;
+ brcm,pcie-ob-window-size = <256>;
++
++ msi-parent = <&msi0>;
++
++ /* iProc event queue based MSI */
++ msi0: msi@18012000 {
++ compatible = "brcm,iproc-msi";
++ msi-controller;
++ interrupt-parent = <&gic>;
++ interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
++ <GIC_SPI 97 IRQ_TYPE_NONE>,
++ <GIC_SPI 98 IRQ_TYPE_NONE>,
++ <GIC_SPI 99 IRQ_TYPE_NONE>,
++ };
+ };
+
+ pcie1: pcie@18013000 {
diff --git a/target/linux/bcm53xx/patches-4.4/153-PCI-iproc-Add-iProc-PCIe-MSI-support.patch b/target/linux/bcm53xx/patches-4.4/153-PCI-iproc-Add-iProc-PCIe-MSI-support.patch
new file mode 100644
index 0000000000..d52e557f50
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/153-PCI-iproc-Add-iProc-PCIe-MSI-support.patch
@@ -0,0 +1,887 @@
+From c81922174d61127ff5baad6059ae148794c72276 Mon Sep 17 00:00:00 2001
+From: Ray Jui <rjui@broadcom.com>
+Date: Tue, 17 Nov 2015 13:14:37 -0800
+Subject: [PATCH 153/154] PCI: iproc: Add iProc PCIe MSI support
+
+This patch adds PCIe MSI support for both PAXB and PAXC interfaces on
+all iProc based platforms
+
+The iProc PCIe MSI support deploys an event queue based implementation.
+Each event queue is serviced by a GIC interrupt and can support up to 64
+MSI vectors. Host memory is allocated for the event queues, and each event
+queue consists of 64 word-sized entries. MSI data is written to the
+lower 16-bit of each entry, whereas the upper 16-bit of the entry is
+reserved for the controller for internal processing
+
+Each event queue is tracked by a head pointer and tail pointer. Head
+pointer indicates the next entry in the event queue to be processed by
+the driver and is updated by the driver after processing is done.
+The controller uses the tail pointer as the next MSI data insertion
+point. The controller ensures MSI data is flushed to host memory before
+updating the tail pointer and then triggering the interrupt
+
+MSI IRQ affinity is supported by evenly distributing the interrupts to
+each CPU core. MSI vector is moved from one GIC interrupt to another in
+order to steer to the target CPU
+
+Therefore, the actual number of supported MSI vectors is:
+
+M * 64 / N
+
+where M denotes the number of GIC interrupts (event queues), and N
+denotes the number of CPU cores
+
+This iProc event queue based MSI support should not be used with newer
+platforms with integrated MSI support in the GIC (e.g., giv2m or
+gicv3-its)
+
+Signed-off-by: Ray Jui <rjui@broadcom.com>
+Reviewed-by: Anup Patel <anup.patel@broadcom.com>
+Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
+Reviewed-by: Scott Branden <sbranden@broadcom.com>
+---
+ drivers/pci/host/Kconfig | 9 +
+ drivers/pci/host/Makefile | 1 +
+ drivers/pci/host/pcie-iproc-bcma.c | 1 +
+ drivers/pci/host/pcie-iproc-msi.c | 675 +++++++++++++++++++++++++++++++++
+ drivers/pci/host/pcie-iproc-platform.c | 1 +
+ drivers/pci/host/pcie-iproc.c | 26 ++
+ drivers/pci/host/pcie-iproc.h | 23 +-
+ 7 files changed, 734 insertions(+), 2 deletions(-)
+ create mode 100644 drivers/pci/host/pcie-iproc-msi.c
+
+--- a/drivers/pci/host/Kconfig
++++ b/drivers/pci/host/Kconfig
+@@ -126,6 +126,15 @@ config PCIE_IPROC
+ iProc family of SoCs. An appropriate bus interface driver also needs
+ to be enabled
+
++config PCIE_IPROC_MSI
++ bool "Broadcom iProc PCIe MSI support"
++ depends on ARCH_BCM_IPROC && PCI_MSI
++ select PCI_MSI_IRQ_DOMAIN
++ default ARCH_BCM_IPROC
++ help
++ Say Y here if you want to enable MSI support for Broadcom's iProc
++ PCIe controller
++
+ config PCIE_IPROC_PLATFORM
+ tristate "Broadcom iProc PCIe platform bus driver"
+ depends on ARCH_BCM_IPROC || (ARM && COMPILE_TEST)
+--- a/drivers/pci/host/Makefile
++++ b/drivers/pci/host/Makefile
+@@ -15,6 +15,7 @@ obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene
+ obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
+ obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
+ obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
++obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
+ obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
+ obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
+ obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
+--- a/drivers/pci/host/pcie-iproc-bcma.c
++++ b/drivers/pci/host/pcie-iproc-bcma.c
+@@ -55,6 +55,7 @@ static int iproc_pcie_bcma_probe(struct
+ bcma_set_drvdata(bdev, pcie);
+
+ pcie->base = bdev->io_addr;
++ pcie->base_addr = bdev->addr;
+
+ res_mem.start = bdev->addr_s[0];
+ res_mem.end = bdev->addr_s[0] + SZ_128M - 1;
+--- /dev/null
++++ b/drivers/pci/host/pcie-iproc-msi.c
+@@ -0,0 +1,675 @@
++/*
++ * Copyright (C) 2015 Broadcom Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation version 2.
++ *
++ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
++ * kind, whether express or implied; without even the implied warranty
++ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/interrupt.h>
++#include <linux/irqchip/chained_irq.h>
++#include <linux/irqdomain.h>
++#include <linux/msi.h>
++#include <linux/of_irq.h>
++#include <linux/of_pci.h>
++#include <linux/pci.h>
++
++#include "pcie-iproc.h"
++
++#define IPROC_MSI_INTR_EN_SHIFT 11
++#define IPROC_MSI_INTR_EN BIT(IPROC_MSI_INTR_EN_SHIFT)
++#define IPROC_MSI_INT_N_EVENT_SHIFT 1
++#define IPROC_MSI_INT_N_EVENT BIT(IPROC_MSI_INT_N_EVENT_SHIFT)
++#define IPROC_MSI_EQ_EN_SHIFT 0
++#define IPROC_MSI_EQ_EN BIT(IPROC_MSI_EQ_EN_SHIFT)
++
++#define IPROC_MSI_EQ_MASK 0x3f
++
++/* max number of GIC interrupts */
++#define NR_HW_IRQS 6
++
++/* number of entries in each event queue */
++#define EQ_LEN 64
++
++/* size of each event queue memory region */
++#define EQ_MEM_REGION_SIZE SZ_4K
++
++/* size of each MSI address region */
++#define MSI_MEM_REGION_SIZE SZ_4K
++
++enum iproc_msi_reg {
++ IPROC_MSI_EQ_PAGE = 0,
++ IPROC_MSI_EQ_PAGE_UPPER,
++ IPROC_MSI_PAGE,
++ IPROC_MSI_PAGE_UPPER,
++ IPROC_MSI_CTRL,
++ IPROC_MSI_EQ_HEAD,
++ IPROC_MSI_EQ_TAIL,
++ IPROC_MSI_INTS_EN,
++ IPROC_MSI_REG_SIZE,
++};
++
++struct iproc_msi;
++
++/**
++ * iProc MSI group
++ *
++ * One MSI group is allocated per GIC interrupt, serviced by one iProc MSI
++ * event queue
++ *
++ * @msi: pointer to iProc MSI data
++ * @gic_irq: GIC interrupt
++ * @eq: Event queue number
++ */
++struct iproc_msi_grp {
++ struct iproc_msi *msi;
++ int gic_irq;
++ unsigned int eq;
++};
++
++/**
++ * iProc event queue based MSI
++ *
++ * Only meant to be used on platforms without MSI support integrated into the
++ * GIC
++ *
++ * @pcie: pointer to iProc PCIe data
++ * @reg_offsets: MSI register offsets
++ * @grps: MSI groups
++ * @nr_irqs: number of total interrupts connected to GIC
++ * @nr_cpus: number of toal CPUs
++ * @has_inten_reg: indicates the MSI interrupt enable register needs to be
++ * set explicitly (required for some legacy platforms)
++ * @bitmap: MSI vector bitmap
++ * @bitmap_lock: lock to protect access to the MSI bitmap
++ * @nr_msi_vecs: total number of MSI vectors
++ * @inner_domain: inner IRQ domain
++ * @msi_domain: MSI IRQ domain
++ * @nr_eq_region: required number of 4K aligned memory region for MSI event
++ * queues
++ * @nr_msi_region: required number of 4K aligned address region for MSI posted
++ * writes
++ * @eq_cpu: pointer to allocated memory region for MSI event queues
++ * @eq_dma: DMA address of MSI event queues
++ * @msi_addr: MSI address
++ */
++struct iproc_msi {
++ struct iproc_pcie *pcie;
++ const u16 (*reg_offsets)[IPROC_MSI_REG_SIZE];
++ struct iproc_msi_grp *grps;
++ int nr_irqs;
++ int nr_cpus;
++ bool has_inten_reg;
++ unsigned long *bitmap;
++ struct mutex bitmap_lock;
++ unsigned int nr_msi_vecs;
++ struct irq_domain *inner_domain;
++ struct irq_domain *msi_domain;
++ unsigned int nr_eq_region;
++ unsigned int nr_msi_region;
++ void *eq_cpu;
++ dma_addr_t eq_dma;
++ phys_addr_t msi_addr;
++};
++
++static const u16 iproc_msi_reg_paxb[NR_HW_IRQS][IPROC_MSI_REG_SIZE] = {
++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x210, 0x250, 0x254, 0x208 },
++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x214, 0x258, 0x25c, 0x208 },
++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x218, 0x260, 0x264, 0x208 },
++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x21c, 0x268, 0x26c, 0x208 },
++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x220, 0x270, 0x274, 0x208 },
++ { 0x200, 0x2c0, 0x204, 0x2c4, 0x224, 0x278, 0x27c, 0x208 },
++};
++
++static const u16 iproc_msi_reg_paxc[NR_HW_IRQS][IPROC_MSI_REG_SIZE] = {
++ { 0xc00, 0xc04, 0xc08, 0xc0c, 0xc40, 0xc50, 0xc60 },
++ { 0xc10, 0xc14, 0xc18, 0xc1c, 0xc44, 0xc54, 0xc64 },
++ { 0xc20, 0xc24, 0xc28, 0xc2c, 0xc48, 0xc58, 0xc68 },
++ { 0xc30, 0xc34, 0xc38, 0xc3c, 0xc4c, 0xc5c, 0xc6c },
++};
++
++static inline u32 iproc_msi_read_reg(struct iproc_msi *msi,
++ enum iproc_msi_reg reg,
++ unsigned int eq)
++{
++ struct iproc_pcie *pcie = msi->pcie;
++
++ return readl_relaxed(pcie->base + msi->reg_offsets[eq][reg]);
++}
++
++static inline void iproc_msi_write_reg(struct iproc_msi *msi,
++ enum iproc_msi_reg reg,
++ int eq, u32 val)
++{
++ struct iproc_pcie *pcie = msi->pcie;
++
++ writel_relaxed(val, pcie->base + msi->reg_offsets[eq][reg]);
++}
++
++static inline u32 hwirq_to_group(struct iproc_msi *msi, unsigned long hwirq)
++{
++ return (hwirq % msi->nr_irqs);
++}
++
++static inline unsigned int iproc_msi_addr_offset(struct iproc_msi *msi,
++ unsigned long hwirq)
++{
++ if (msi->nr_msi_region > 1)
++ return hwirq_to_group(msi, hwirq) * MSI_MEM_REGION_SIZE;
++ else
++ return hwirq_to_group(msi, hwirq) * sizeof(u32);
++}
++
++static inline unsigned int iproc_msi_eq_offset(struct iproc_msi *msi, u32 eq)
++{
++ if (msi->nr_eq_region > 1)
++ return eq * EQ_MEM_REGION_SIZE;
++ else
++ return eq * EQ_LEN * sizeof(u32);
++}
++
++static struct irq_chip iproc_msi_irq_chip = {
++ .name = "iProc-MSI",
++};
++
++static struct msi_domain_info iproc_msi_domain_info = {
++ .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
++ MSI_FLAG_PCI_MSIX,
++ .chip = &iproc_msi_irq_chip,
++};
++
++/*
++ * In iProc PCIe core, each MSI group is serviced by a GIC interrupt and a
++ * dedicated event queue. Each MSI group can support up to 64 MSI vectors
++ *
++ * The number of MSI groups varies between different iProc SoCs. The total
++ * number of CPU cores also varies. To support MSI IRQ affinity, we
++ * distribute GIC interrupts across all available CPUs. MSI vector is moved
++ * from one GIC interrupt to another to steer to the target CPU
++ *
++ * Assuming:
++ * - the number of MSI groups is M
++ * - the number of CPU cores is N
++ * - M is always a multiple of N
++ *
++ * Total number of raw MSI vectors = M * 64
++ * Total number of supported MSI vectors = (M * 64) / N
++ */
++static inline int hwirq_to_cpu(struct iproc_msi *msi, unsigned long hwirq)
++{
++ return (hwirq % msi->nr_cpus);
++}
++
++static inline unsigned long hwirq_to_canonical_hwirq(struct iproc_msi *msi,
++ unsigned long hwirq)
++{
++ return (hwirq - hwirq_to_cpu(msi, hwirq));
++}
++
++static int iproc_msi_irq_set_affinity(struct irq_data *data,
++ const struct cpumask *mask, bool force)
++{
++ struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
++ int target_cpu = cpumask_first(mask);
++ int curr_cpu;
++
++ curr_cpu = hwirq_to_cpu(msi, data->hwirq);
++ if (curr_cpu == target_cpu)
++ return IRQ_SET_MASK_OK_DONE;
++
++ /* steer MSI to the target CPU */
++ data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
++
++ return IRQ_SET_MASK_OK;
++}
++
++static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
++ struct msi_msg *msg)
++{
++ struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
++ dma_addr_t addr;
++
++ addr = msi->msi_addr + iproc_msi_addr_offset(msi, data->hwirq);
++ msg->address_lo = lower_32_bits(addr);
++ msg->address_hi = upper_32_bits(addr);
++ msg->data = data->hwirq;
++}
++
++static struct irq_chip iproc_msi_bottom_irq_chip = {
++ .name = "MSI",
++ .irq_set_affinity = iproc_msi_irq_set_affinity,
++ .irq_compose_msi_msg = iproc_msi_irq_compose_msi_msg,
++};
++
++static int iproc_msi_irq_domain_alloc(struct irq_domain *domain,
++ unsigned int virq, unsigned int nr_irqs,
++ void *args)
++{
++ struct iproc_msi *msi = domain->host_data;
++ int hwirq;
++
++ mutex_lock(&msi->bitmap_lock);
++
++ /* allocate 'nr_cpus' number of MSI vectors each time */
++ hwirq = bitmap_find_next_zero_area(msi->bitmap, msi->nr_msi_vecs, 0,
++ msi->nr_cpus, 0);
++ if (hwirq < msi->nr_msi_vecs) {
++ bitmap_set(msi->bitmap, hwirq, msi->nr_cpus);
++ } else {
++ mutex_unlock(&msi->bitmap_lock);
++ return -ENOSPC;
++ }
++
++ mutex_unlock(&msi->bitmap_lock);
++
++ irq_domain_set_info(domain, virq, hwirq, &iproc_msi_bottom_irq_chip,
++ domain->host_data, handle_simple_irq, NULL, NULL);
++
++ return 0;
++}
++
++static void iproc_msi_irq_domain_free(struct irq_domain *domain,
++ unsigned int virq, unsigned int nr_irqs)
++{
++ struct irq_data *data = irq_domain_get_irq_data(domain, virq);
++ struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
++ unsigned int hwirq;
++
++ mutex_lock(&msi->bitmap_lock);
++
++ hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq);
++ bitmap_clear(msi->bitmap, hwirq, msi->nr_cpus);
++
++ mutex_unlock(&msi->bitmap_lock);
++
++ irq_domain_free_irqs_parent(domain, virq, nr_irqs);
++}
++
++static const struct irq_domain_ops msi_domain_ops = {
++ .alloc = iproc_msi_irq_domain_alloc,
++ .free = iproc_msi_irq_domain_free,
++};
++
++static inline u32 decode_msi_hwirq(struct iproc_msi *msi, u32 eq, u32 head)
++{
++ u32 *msg, hwirq;
++ unsigned int offs;
++
++ offs = iproc_msi_eq_offset(msi, eq) + head * sizeof(u32);
++ msg = (u32 *)(msi->eq_cpu + offs);
++ hwirq = *msg & IPROC_MSI_EQ_MASK;
++
++ /*
++ * Since we have multiple hwirq mapped to a single MSI vector,
++ * now we need to derive the hwirq at CPU0. It can then be used to
++ * mapped back to virq
++ */
++ return hwirq_to_canonical_hwirq(msi, hwirq);
++}
++
++static void iproc_msi_handler(struct irq_desc *desc)
++{
++ struct irq_chip *chip = irq_desc_get_chip(desc);
++ struct iproc_msi_grp *grp;
++ struct iproc_msi *msi;
++ struct iproc_pcie *pcie;
++ u32 eq, head, tail, nr_events;
++ unsigned long hwirq;
++ int virq;
++
++ chained_irq_enter(chip, desc);
++
++ grp = irq_desc_get_handler_data(desc);
++ msi = grp->msi;
++ pcie = msi->pcie;
++ eq = grp->eq;
++
++ /*
++ * iProc MSI event queue is tracked by head and tail pointers. Head
++ * pointer indicates the next entry (MSI data) to be consumed by SW in
++ * the queue and needs to be updated by SW. iProc MSI core uses the
++ * tail pointer as the next data insertion point
++ *
++ * Entries between head and tail pointers contain valid MSI data. MSI
++ * data is guaranteed to be in the event queue memory before the tail
++ * pointer is updated by the iProc MSI core
++ */
++ head = iproc_msi_read_reg(msi, IPROC_MSI_EQ_HEAD,
++ eq) & IPROC_MSI_EQ_MASK;
++ do {
++ tail = iproc_msi_read_reg(msi, IPROC_MSI_EQ_TAIL,
++ eq) & IPROC_MSI_EQ_MASK;
++
++ /*
++ * Figure out total number of events (MSI data) to be
++ * processed
++ */
++ nr_events = (tail < head) ?
++ (EQ_LEN - (head - tail)) : (tail - head);
++ if (!nr_events)
++ break;
++
++ /* process all outstanding events */
++ while (nr_events--) {
++ hwirq = decode_msi_hwirq(msi, eq, head);
++ virq = irq_find_mapping(msi->inner_domain, hwirq);
++ generic_handle_irq(virq);
++
++ head++;
++ head %= EQ_LEN;
++ }
++
++ /*
++ * Now all outstanding events have been processed. Update the
++ * head pointer
++ */
++ iproc_msi_write_reg(msi, IPROC_MSI_EQ_HEAD, eq, head);
++
++ /*
++ * Now go read the tail pointer again to see if there are new
++ * oustanding events that came in during the above window
++ */
++ } while (true);
++
++ chained_irq_exit(chip, desc);
++}
++
++static void iproc_msi_enable(struct iproc_msi *msi)
++{
++ int i, eq;
++ u32 val;
++
++ /* program memory region for each event queue */
++ for (i = 0; i < msi->nr_eq_region; i++) {
++ dma_addr_t addr = msi->eq_dma + (i * EQ_MEM_REGION_SIZE);
++
++ iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE, i,
++ lower_32_bits(addr));
++ iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE_UPPER, i,
++ upper_32_bits(addr));
++ }
++
++ /* program address region for MSI posted writes */
++ for (i = 0; i < msi->nr_msi_region; i++) {
++ phys_addr_t addr = msi->msi_addr + (i * MSI_MEM_REGION_SIZE);
++
++ iproc_msi_write_reg(msi, IPROC_MSI_PAGE, i,
++ lower_32_bits(addr));
++ iproc_msi_write_reg(msi, IPROC_MSI_PAGE_UPPER, i,
++ upper_32_bits(addr));
++ }
++
++ for (eq = 0; eq < msi->nr_irqs; eq++) {
++ /* enable MSI event queue */
++ val = IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT |
++ IPROC_MSI_EQ_EN;
++ iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val);
++
++ /*
++ * Some legacy platforms require the MSI interrupt enable
++ * register to be set explicitly
++ */
++ if (msi->has_inten_reg) {
++ val = iproc_msi_read_reg(msi, IPROC_MSI_INTS_EN, eq);
++ val |= BIT(eq);
++ iproc_msi_write_reg(msi, IPROC_MSI_INTS_EN, eq, val);
++ }
++ }
++}
++
++static void iproc_msi_disable(struct iproc_msi *msi)
++{
++ u32 eq, val;
++
++ for (eq = 0; eq < msi->nr_irqs; eq++) {
++ if (msi->has_inten_reg) {
++ val = iproc_msi_read_reg(msi, IPROC_MSI_INTS_EN, eq);
++ val &= ~BIT(eq);
++ iproc_msi_write_reg(msi, IPROC_MSI_INTS_EN, eq, val);
++ }
++
++ val = iproc_msi_read_reg(msi, IPROC_MSI_CTRL, eq);
++ val &= ~(IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT |
++ IPROC_MSI_EQ_EN);
++ iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val);
++ }
++}
++
++static int iproc_msi_alloc_domains(struct device_node *node,
++ struct iproc_msi *msi)
++{
++ msi->inner_domain = irq_domain_add_linear(NULL, msi->nr_msi_vecs,
++ &msi_domain_ops, msi);
++ if (!msi->inner_domain)
++ return -ENOMEM;
++
++ msi->msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(node),
++ &iproc_msi_domain_info,
++ msi->inner_domain);
++ if (!msi->msi_domain) {
++ irq_domain_remove(msi->inner_domain);
++ return -ENOMEM;
++ }
++
++ return 0;
++}
++
++static void iproc_msi_free_domains(struct iproc_msi *msi)
++{
++ if (msi->msi_domain)
++ irq_domain_remove(msi->msi_domain);
++
++ if (msi->inner_domain)
++ irq_domain_remove(msi->inner_domain);
++}
++
++static void iproc_msi_irq_free(struct iproc_msi *msi, unsigned int cpu)
++{
++ int i;
++
++ for (i = cpu; i < msi->nr_irqs; i += msi->nr_cpus) {
++ irq_set_chained_handler_and_data(msi->grps[i].gic_irq,
++ NULL, NULL);
++ }
++}
++
++static int iproc_msi_irq_setup(struct iproc_msi *msi, unsigned int cpu)
++{
++ int i, ret;
++ cpumask_var_t mask;
++ struct iproc_pcie *pcie = msi->pcie;
++
++ for (i = cpu; i < msi->nr_irqs; i += msi->nr_cpus) {
++ irq_set_chained_handler_and_data(msi->grps[i].gic_irq,
++ iproc_msi_handler,
++ &msi->grps[i]);
++ /* dedicate GIC interrupt to each CPU core */
++ if (alloc_cpumask_var(&mask, GFP_KERNEL)) {
++ cpumask_clear(mask);
++ cpumask_set_cpu(cpu, mask);
++ ret = irq_set_affinity(msi->grps[i].gic_irq, mask);
++ if (ret)
++ dev_err(pcie->dev,
++ "failed to set affinity for IRQ%d\n",
++ msi->grps[i].gic_irq);
++ free_cpumask_var(mask);
++ } else {
++ dev_err(pcie->dev, "failed to alloc CPU mask\n");
++ ret = -EINVAL;
++ }
++
++ if (ret) {
++ /* free all configured/unconfigured irqs */
++ iproc_msi_irq_free(msi, cpu);
++ return ret;
++ }
++ }
++
++ return 0;
++}
++
++int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node)
++{
++ struct iproc_msi *msi;
++ int i, ret;
++ unsigned int cpu;
++
++ if (!of_device_is_compatible(node, "brcm,iproc-msi"))
++ return -ENODEV;
++
++ if (!of_find_property(node, "msi-controller", NULL))
++ return -ENODEV;
++
++ if (pcie->msi)
++ return -EBUSY;
++
++ msi = devm_kzalloc(pcie->dev, sizeof(*msi), GFP_KERNEL);
++ if (!msi)
++ return -ENOMEM;
++
++ msi->pcie = pcie;
++ pcie->msi = msi;
++ msi->msi_addr = pcie->base_addr;
++ mutex_init(&msi->bitmap_lock);
++ msi->nr_cpus = num_possible_cpus();
++
++ msi->nr_irqs = of_irq_count(node);
++ if (!msi->nr_irqs) {
++ dev_err(pcie->dev, "found no MSI GIC interrupt\n");
++ return -ENODEV;
++ }
++
++ if (msi->nr_irqs > NR_HW_IRQS) {
++ dev_warn(pcie->dev, "too many MSI GIC interrupts defined %d\n",
++ msi->nr_irqs);
++ msi->nr_irqs = NR_HW_IRQS;
++ }
++
++ if (msi->nr_irqs < msi->nr_cpus) {
++ dev_err(pcie->dev,
++ "not enough GIC interrupts for MSI affinity\n");
++ return -EINVAL;
++ }
++
++ if (msi->nr_irqs % msi->nr_cpus != 0) {
++ msi->nr_irqs -= msi->nr_irqs % msi->nr_cpus;
++ dev_warn(pcie->dev, "Reducing number of interrupts to %d\n",
++ msi->nr_irqs);
++ }
++
++ switch (pcie->type) {
++ case IPROC_PCIE_PAXB:
++ msi->reg_offsets = iproc_msi_reg_paxb;
++ msi->nr_eq_region = 1;
++ msi->nr_msi_region = 1;
++ break;
++ case IPROC_PCIE_PAXC:
++ msi->reg_offsets = iproc_msi_reg_paxc;
++ msi->nr_eq_region = msi->nr_irqs;
++ msi->nr_msi_region = msi->nr_irqs;
++ break;
++ default:
++ dev_err(pcie->dev, "incompatible iProc PCIe interface\n");
++ return -EINVAL;
++ }
++
++ if (of_find_property(node, "brcm,pcie-msi-inten", NULL))
++ msi->has_inten_reg = true;
++
++ msi->nr_msi_vecs = msi->nr_irqs * EQ_LEN;
++ msi->bitmap = devm_kcalloc(pcie->dev, BITS_TO_LONGS(msi->nr_msi_vecs),
++ sizeof(*msi->bitmap), GFP_KERNEL);
++ if (!msi->bitmap)
++ return -ENOMEM;
++
++ msi->grps = devm_kcalloc(pcie->dev, msi->nr_irqs, sizeof(*msi->grps),
++ GFP_KERNEL);
++ if (!msi->grps)
++ return -ENOMEM;
++
++ for (i = 0; i < msi->nr_irqs; i++) {
++ unsigned int irq = irq_of_parse_and_map(node, i);
++
++ if (!irq) {
++ dev_err(pcie->dev, "unable to parse/map interrupt\n");
++ ret = -ENODEV;
++ goto free_irqs;
++ }
++ msi->grps[i].gic_irq = irq;
++ msi->grps[i].msi = msi;
++ msi->grps[i].eq = i;
++ }
++
++ /* reserve memory for event queue and make sure memories are zeroed */
++ msi->eq_cpu = dma_zalloc_coherent(pcie->dev,
++ msi->nr_eq_region * EQ_MEM_REGION_SIZE,
++ &msi->eq_dma, GFP_KERNEL);
++ if (!msi->eq_cpu) {
++ ret = -ENOMEM;
++ goto free_irqs;
++ }
++
++ ret = iproc_msi_alloc_domains(node, msi);
++ if (ret) {
++ dev_err(pcie->dev, "failed to create MSI domains\n");
++ goto free_eq_dma;
++ }
++
++ for_each_online_cpu(cpu) {
++ ret = iproc_msi_irq_setup(msi, cpu);
++ if (ret)
++ goto free_msi_irq;
++ }
++
++ iproc_msi_enable(msi);
++
++ return 0;
++
++free_msi_irq:
++ for_each_online_cpu(cpu)
++ iproc_msi_irq_free(msi, cpu);
++ iproc_msi_free_domains(msi);
++
++free_eq_dma:
++ dma_free_coherent(pcie->dev, msi->nr_eq_region * EQ_MEM_REGION_SIZE,
++ msi->eq_cpu, msi->eq_dma);
++
++free_irqs:
++ for (i = 0; i < msi->nr_irqs; i++) {
++ if (msi->grps[i].gic_irq)
++ irq_dispose_mapping(msi->grps[i].gic_irq);
++ }
++ pcie->msi = NULL;
++ return ret;
++}
++EXPORT_SYMBOL(iproc_msi_init);
++
++void iproc_msi_exit(struct iproc_pcie *pcie)
++{
++ struct iproc_msi *msi = pcie->msi;
++ unsigned int i, cpu;
++
++ if (!msi)
++ return;
++
++ iproc_msi_disable(msi);
++
++ for_each_online_cpu(cpu)
++ iproc_msi_irq_free(msi, cpu);
++
++ iproc_msi_free_domains(msi);
++
++ dma_free_coherent(pcie->dev, msi->nr_eq_region * EQ_MEM_REGION_SIZE,
++ msi->eq_cpu, msi->eq_dma);
++
++ for (i = 0; i < msi->nr_irqs; i++) {
++ if (msi->grps[i].gic_irq)
++ irq_dispose_mapping(msi->grps[i].gic_irq);
++ }
++}
++EXPORT_SYMBOL(iproc_msi_exit);
+--- a/drivers/pci/host/pcie-iproc-platform.c
++++ b/drivers/pci/host/pcie-iproc-platform.c
+@@ -71,6 +71,7 @@ static int iproc_pcie_pltfm_probe(struct
+ dev_err(pcie->dev, "unable to map controller registers\n");
+ return -ENOMEM;
+ }
++ pcie->base_addr = reg.start;
+
+ if (of_property_read_bool(np, "brcm,pcie-ob")) {
+ u32 val;
+--- a/drivers/pci/host/pcie-iproc.c
++++ b/drivers/pci/host/pcie-iproc.c
+@@ -440,6 +440,26 @@ static int iproc_pcie_map_ranges(struct
+ return 0;
+ }
+
++static int iproc_pcie_msi_enable(struct iproc_pcie *pcie)
++{
++ struct device_node *msi_node;
++
++ msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0);
++ if (!msi_node)
++ return -ENODEV;
++
++ /*
++ * If another MSI controller is being used, the call below should fail
++ * but that is okay
++ */
++ return iproc_msi_init(pcie, msi_node);
++}
++
++static void iproc_pcie_msi_disable(struct iproc_pcie *pcie)
++{
++ iproc_msi_exit(pcie);
++}
++
+ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
+ {
+ int ret;
+@@ -507,6 +527,10 @@ int iproc_pcie_setup(struct iproc_pcie *
+
+ iproc_pcie_enable(pcie);
+
++ if (IS_ENABLED(CONFIG_PCI_MSI))
++ if (iproc_pcie_msi_enable(pcie))
++ dev_info(pcie->dev, "not using iProc MSI\n");
++
+ pci_scan_child_bus(bus);
+ pci_assign_unassigned_bus_resources(bus);
+ pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
+@@ -531,6 +555,8 @@ int iproc_pcie_remove(struct iproc_pcie
+ pci_stop_root_bus(pcie->root_bus);
+ pci_remove_root_bus(pcie->root_bus);
+
++ iproc_pcie_msi_disable(pcie);
++
+ phy_power_off(pcie->phy);
+ phy_exit(pcie->phy);
+
+--- a/drivers/pci/host/pcie-iproc.h
++++ b/drivers/pci/host/pcie-iproc.h
+@@ -41,6 +41,8 @@ struct iproc_pcie_ob {
+ resource_size_t window_size;
+ };
+
++struct iproc_msi;
++
+ /**
+ * iProc PCIe device
+ *
+@@ -48,19 +50,21 @@ struct iproc_pcie_ob {
+ * @type: iProc PCIe interface type
+ * @reg_offsets: register offsets
+ * @base: PCIe host controller I/O register base
++ * @base_addr: PCIe host controller register base physical address
+ * @sysdata: Per PCI controller data (ARM-specific)
+ * @root_bus: pointer to root bus
+ * @phy: optional PHY device that controls the Serdes
+- * @irqs: interrupt IDs
+ * @map_irq: function callback to map interrupts
+- * @need_ob_cfg: indidates SW needs to configure the outbound mapping window
++ * @need_ob_cfg: indicates SW needs to configure the outbound mapping window
+ * @ob: outbound mapping parameters
++ * @msi: MSI data
+ */
+ struct iproc_pcie {
+ struct device *dev;
+ enum iproc_pcie_type type;
+ const u16 *reg_offsets;
+ void __iomem *base;
++ phys_addr_t base_addr;
+ #ifdef CONFIG_ARM
+ struct pci_sys_data sysdata;
+ #endif
+@@ -69,9 +73,24 @@ struct iproc_pcie {
+ int (*map_irq)(const struct pci_dev *, u8, u8);
+ bool need_ob_cfg;
+ struct iproc_pcie_ob ob;
++ struct iproc_msi *msi;
+ };
+
+ int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res);
+ int iproc_pcie_remove(struct iproc_pcie *pcie);
+
++#ifdef CONFIG_PCI_MSI
++int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node);
++void iproc_msi_exit(struct iproc_pcie *pcie);
++#else
++static inline int iproc_msi_init(struct iproc_pcie *pcie,
++ struct device_node *node)
++{
++ return -ENODEV;
++}
++static void iproc_msi_exit(struct iproc_pcie *pcie)
++{
++}
++#endif
++
+ #endif /* _PCIE_IPROC_H */
diff --git a/target/linux/bcm53xx/patches-4.4/170-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch b/target/linux/bcm53xx/patches-4.4/170-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch
new file mode 100644
index 0000000000..60fba1315a
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/170-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch
@@ -0,0 +1,52 @@
+From b58682598541262f967ecd6db04bacac38026d3c Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Fri, 30 Oct 2015 15:29:52 +0100
+Subject: [PATCH] ARM: BCM5301X: Add missing Netgear R8000 LEDs
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 30 +++++++++++++++++++++++++++++
+ 1 file changed, 30 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -50,6 +50,36 @@
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
++
++ wireless {
++ label = "bcm53xx:white:wireless";
++ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-off";
++ };
++
++ wps {
++ label = "bcm53xx:white:wps";
++ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "default-off";
++ };
++
++ 5ghz-2 {
++ label = "bcm53xx:white:5ghz-2";
++ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ usb3 {
++ label = "bcm53xx:white:usb3";
++ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
++
++ usb2 {
++ label = "bcm53xx:white:usb2";
++ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
++ linux,default-trigger = "default-off";
++ };
+ };
+
+ gpio-keys {
diff --git a/target/linux/bcm53xx/patches-4.4/186-USB-bcma-switch-to-GPIO-descriptor-for-power-control.patch b/target/linux/bcm53xx/patches-4.4/186-USB-bcma-switch-to-GPIO-descriptor-for-power-control.patch
new file mode 100644
index 0000000000..f1995d1e6d
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/186-USB-bcma-switch-to-GPIO-descriptor-for-power-control.patch
@@ -0,0 +1,73 @@
+From 0cb136f9882e4649ad6160bb7b48955ff728888c Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sun, 1 Nov 2015 08:17:21 +0100
+Subject: [PATCH V2] USB: bcma: switch to GPIO descriptor for power control
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+So far we were using simple (legacy) GPIO functions & some poor logic to
+control power. It got many drawbacks: we were ignoring OF flags
+(GPIO_ACTIVE_LOW), we were not setting direction to output and we were
+assuming gpio_request success all the time.
+Fix it by switching to gpiod functions and adding appropriate checks.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/usb/host/bcma-hcd.c | 21 ++++++++++-----------
+ 1 file changed, 10 insertions(+), 11 deletions(-)
+
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -21,6 +21,7 @@
+ */
+ #include <linux/bcma/bcma.h>
+ #include <linux/delay.h>
++#include <linux/gpio/consumer.h>
+ #include <linux/platform_device.h>
+ #include <linux/module.h>
+ #include <linux/slab.h>
+@@ -36,6 +37,7 @@ MODULE_LICENSE("GPL");
+ struct bcma_hcd_device {
+ struct platform_device *ehci_dev;
+ struct platform_device *ohci_dev;
++ struct gpio_desc *gpio_desc;
+ };
+
+ /* Wait for bitmask in a register to get set or cleared.
+@@ -228,19 +230,12 @@ static void bcma_hcd_init_chip_arm(struc
+
+ static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
+ {
+- int gpio;
++ struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
+
+- gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0);
+- if (!gpio_is_valid(gpio))
++ if (IS_ERR_OR_NULL(usb_dev->gpio_desc))
+ return;
+
+- if (val) {
+- gpio_request(gpio, "bcma-hcd-gpio");
+- gpio_set_value(gpio, 1);
+- } else {
+- gpio_set_value(gpio, 0);
+- gpio_free(gpio);
+- }
++ gpiod_set_value(usb_dev->gpio_desc, val);
+ }
+
+ static const struct usb_ehci_pdata ehci_pdata = {
+@@ -314,7 +309,11 @@ static int bcma_hcd_probe(struct bcma_de
+ if (!usb_dev)
+ return -ENOMEM;
+
+- bcma_hci_platform_power_gpio(dev, true);
++ if (dev->dev.of_node)
++ usb_dev->gpio_desc = devm_get_gpiod_from_child(&dev->dev, "vcc",
++ &dev->dev.of_node->fwnode);
++ if (!IS_ERR_OR_NULL(usb_dev->gpio_desc))
++ gpiod_direction_output(usb_dev->gpio_desc, 1);
+
+ switch (dev->id.id) {
+ case BCMA_CORE_NS_USB20:
diff --git a/target/linux/bcm53xx/patches-4.4/190-usb-xhci-plat-fix-adding-usb3-lpm-capable-quirk.patch b/target/linux/bcm53xx/patches-4.4/190-usb-xhci-plat-fix-adding-usb3-lpm-capable-quirk.patch
new file mode 100644
index 0000000000..c120829495
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/190-usb-xhci-plat-fix-adding-usb3-lpm-capable-quirk.patch
@@ -0,0 +1,63 @@
+From 1420e53fc88673683f8990aa5342e7b2640ce165 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 18 Oct 2015 19:13:27 +0200
+Subject: [PATCH v3 1/6] usb: xhci: plat: fix adding usb3-lpm-capable quirk
+
+The xhci->quirks member is overwritten in xhci_gen_setup() with the
+quirks given through the module load parameter. Without this patch the
+usb3-lpm-capable quirk will be over written before it gets used. This
+patch moves the quirks code to the xhci_plat_quirks() callback function
+which gets called directly after the quirks member variable is
+overwritten with the module load parameter.
+
+I do not have any hardware which is using usb3-lpm-capabls so I can not
+test this on real hardware.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/xhci-plat.c | 14 ++++++++------
+ 1 file changed, 8 insertions(+), 6 deletions(-)
+
+--- a/drivers/usb/host/xhci-plat.c
++++ b/drivers/usb/host/xhci-plat.c
+@@ -38,12 +38,20 @@ static const struct xhci_driver_override
+
+ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
+ {
++ struct platform_device *pdev = to_platform_device(dev);
++ struct device_node *node = pdev->dev.of_node;
++ struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev);
++
+ /*
+ * As of now platform drivers don't provide MSI support so we ensure
+ * here that the generic code does not try to make a pci_dev from our
+ * dev struct in order to setup MSI
+ */
+ xhci->quirks |= XHCI_PLAT;
++
++ if ((node && of_property_read_bool(node, "usb3-lpm-capable")) ||
++ (pdata && pdata->usb3_lpm_capable))
++ xhci->quirks |= XHCI_LPM_SUPPORT;
+ }
+
+ /* called during probe() after chip reset completes */
+@@ -75,8 +83,6 @@ static int xhci_plat_start(struct usb_hc
+
+ static int xhci_plat_probe(struct platform_device *pdev)
+ {
+- struct device_node *node = pdev->dev.of_node;
+- struct usb_xhci_pdata *pdata = dev_get_platdata(&pdev->dev);
+ const struct hc_driver *driver;
+ struct xhci_hcd *xhci;
+ struct resource *res;
+@@ -155,10 +161,6 @@ static int xhci_plat_probe(struct platfo
+ goto disable_clk;
+ }
+
+- if ((node && of_property_read_bool(node, "usb3-lpm-capable")) ||
+- (pdata && pdata->usb3_lpm_capable))
+- xhci->quirks |= XHCI_LPM_SUPPORT;
+-
+ if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+ xhci->shared_hcd->can_do_streams = 1;
+
diff --git a/target/linux/bcm53xx/patches-4.4/191-usb-xhci-add-Broadcom-specific-fake-doorbell.patch b/target/linux/bcm53xx/patches-4.4/191-usb-xhci-add-Broadcom-specific-fake-doorbell.patch
new file mode 100644
index 0000000000..c54cecb133
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/191-usb-xhci-add-Broadcom-specific-fake-doorbell.patch
@@ -0,0 +1,135 @@
+From dd0e5f9a6a4aed849bdb80641c2a2350476cede7 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sun, 21 Jun 2015 11:10:49 +0200
+Subject: [PATCH v3 2/6] usb: xhci: add Broadcom specific fake doorbell
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This fixes problem with controller seeing devices only in some small
+percentage of cold boots.
+This quirk is also added to the platform data so we can activate it
+when we register our platform driver.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/xhci-plat.c | 3 +++
+ drivers/usb/host/xhci.c | 57 +++++++++++++++++++++++++++++++++++++---
+ drivers/usb/host/xhci.h | 1 +
+ include/linux/usb/xhci_pdriver.h | 1 +
+ 4 files changed, 59 insertions(+), 3 deletions(-)
+
+--- a/drivers/usb/host/xhci-plat.c
++++ b/drivers/usb/host/xhci-plat.c
+@@ -52,6 +52,9 @@ static void xhci_plat_quirks(struct devi
+ if ((node && of_property_read_bool(node, "usb3-lpm-capable")) ||
+ (pdata && pdata->usb3_lpm_capable))
+ xhci->quirks |= XHCI_LPM_SUPPORT;
++
++ if (pdata && pdata->usb3_fake_doorbell)
++ xhci->quirks |= XHCI_FAKE_DOORBELL;
+ }
+
+ /* called during probe() after chip reset completes */
+--- a/drivers/usb/host/xhci.c
++++ b/drivers/usb/host/xhci.c
+@@ -121,6 +121,39 @@ int xhci_halt(struct xhci_hcd *xhci)
+ return ret;
+ }
+
++static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
++{
++ u32 temp;
++
++ /* alloc a virt device for slot */
++ if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
++ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
++ return -ENOMEM;
++ }
++
++ /* ring fake doorbell for slot_id ep 0 */
++ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
++ usleep_range(1000, 1500);
++
++ /* read the status register to check if HSE is set or not? */
++ temp = readl(&xhci->op_regs->status);
++
++ /* clear HSE if set */
++ if (temp & STS_FATAL) {
++ xhci_dbg(xhci, "HSE problem detected, status: 0x%x\n", temp);
++ temp &= ~(0x1fff);
++ temp |= STS_FATAL;
++ writel(temp, &xhci->op_regs->status);
++ usleep_range(1000, 1500);
++ readl(&xhci->op_regs->status);
++ }
++
++ /* Free virt device */
++ xhci_free_virt_device(xhci, slot_id);
++
++ return 0;
++}
++
+ /*
+ * Set the run bit and wait for the host to be running.
+ */
+@@ -567,10 +600,25 @@ int xhci_init(struct usb_hcd *hcd)
+
+ static int xhci_run_finished(struct xhci_hcd *xhci)
+ {
+- if (xhci_start(xhci)) {
+- xhci_halt(xhci);
+- return -ENODEV;
++ int err;
++
++ err = xhci_start(xhci);
++ if (err) {
++ err = -ENODEV;
++ goto out_err;
++ }
++ if (xhci->quirks & XHCI_FAKE_DOORBELL) {
++ err = xhci_fake_doorbell(xhci, 1);
++ if (err)
++ goto out_err;
++
++ err = xhci_start(xhci);
++ if (err) {
++ err = -ENODEV;
++ goto out_err;
++ }
+ }
++
+ xhci->shared_hcd->state = HC_STATE_RUNNING;
+ xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+
+@@ -580,6 +628,9 @@ static int xhci_run_finished(struct xhci
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init,
+ "Finished xhci_run for USB3 roothub");
+ return 0;
++out_err:
++ xhci_halt(xhci);
++ return err;
+ }
+
+ /*
+--- a/drivers/usb/host/xhci.h
++++ b/drivers/usb/host/xhci.h
+@@ -1630,6 +1630,7 @@ struct xhci_hcd {
+ /* For controllers with a broken beyond repair streams implementation */
+ #define XHCI_BROKEN_STREAMS (1 << 19)
+ #define XHCI_PME_STUCK_QUIRK (1 << 20)
++#define XHCI_FAKE_DOORBELL (1 << 21)
+ unsigned int num_active_eps;
+ unsigned int limit_active_eps;
+ /* There are two roothubs to keep track of bus suspend info for */
+--- a/include/linux/usb/xhci_pdriver.h
++++ b/include/linux/usb/xhci_pdriver.h
+@@ -22,6 +22,7 @@
+ */
+ struct usb_xhci_pdata {
+ unsigned usb3_lpm_capable:1;
++ unsigned usb3_fake_doorbell:1;
+ };
+
+ #endif /* __USB_CORE_XHCI_PDRIVER_H */
diff --git a/target/linux/bcm53xx/patches-4.4/195-USB-bcma-make-helper-creating-platform-dev-more-gene.patch b/target/linux/bcm53xx/patches-4.4/195-USB-bcma-make-helper-creating-platform-dev-more-gene.patch
new file mode 100644
index 0000000000..17a9260d80
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/195-USB-bcma-make-helper-creating-platform-dev-more-gene.patch
@@ -0,0 +1,75 @@
+From c7c7bf7fcbacadac7781783de25fe1e13e2a2c35 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 16 Jun 2015 12:33:46 +0200
+Subject: [PATCH v3 3/6] usb: bcma: make helper creating platform dev more
+ generic
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Having "bool ohci" argument bounded us to two cases only and didn't
+allow re-using this code for XHCI.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/bcma-hcd.c | 24 +++++++++++++-----------
+ 1 file changed, 13 insertions(+), 11 deletions(-)
+
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -244,7 +244,10 @@ static const struct usb_ehci_pdata ehci_
+ static const struct usb_ohci_pdata ohci_pdata = {
+ };
+
+-static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
++static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev,
++ const char *name, u32 addr,
++ const void *data,
++ size_t size)
+ {
+ struct platform_device *hci_dev;
+ struct resource hci_res[2];
+@@ -259,8 +262,7 @@ static struct platform_device *bcma_hcd_
+ hci_res[1].start = dev->irq;
+ hci_res[1].flags = IORESOURCE_IRQ;
+
+- hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
+- "ehci-platform" , 0);
++ hci_dev = platform_device_alloc(name, 0);
+ if (!hci_dev)
+ return ERR_PTR(-ENOMEM);
+
+@@ -271,12 +273,8 @@ static struct platform_device *bcma_hcd_
+ ARRAY_SIZE(hci_res));
+ if (ret)
+ goto err_alloc;
+- if (ohci)
+- ret = platform_device_add_data(hci_dev, &ohci_pdata,
+- sizeof(ohci_pdata));
+- else
+- ret = platform_device_add_data(hci_dev, &ehci_pdata,
+- sizeof(ehci_pdata));
++ if (data)
++ ret = platform_device_add_data(hci_dev, data, size);
+ if (ret)
+ goto err_alloc;
+ ret = platform_device_add(hci_dev);
+@@ -333,11 +331,15 @@ static int bcma_hcd_probe(struct bcma_de
+ && chipinfo->rev == 0)
+ ohci_addr = 0x18009000;
+
+- usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
++ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
++ ohci_addr, &ohci_pdata,
++ sizeof(ohci_pdata));
+ if (IS_ERR(usb_dev->ohci_dev))
+ return PTR_ERR(usb_dev->ohci_dev);
+
+- usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
++ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
++ dev->addr, &ehci_pdata,
++ sizeof(ehci_pdata));
+ if (IS_ERR(usb_dev->ehci_dev)) {
+ err = PTR_ERR(usb_dev->ehci_dev);
+ goto err_unregister_ohci_dev;
diff --git a/target/linux/bcm53xx/patches-4.4/196-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch b/target/linux/bcm53xx/patches-4.4/196-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch
new file mode 100644
index 0000000000..262192b7bf
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/196-USB-bcma-use-separated-function-for-USB-2.0-initiali.patch
@@ -0,0 +1,112 @@
+From fa5622c2fadae573dd6b0f5bffe436b230b411f6 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 16 Jun 2015 12:52:07 +0200
+Subject: [PATCH v3 4/6] usb: bcma: use separated function for USB 2.0
+ initialization
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This will allow adding USB 3.0 (XHCI) support cleanly.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/bcma-hcd.c | 51 +++++++++++++++++++++++++++++++--------------
+ 1 file changed, 35 insertions(+), 16 deletions(-)
+
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -35,6 +35,7 @@ MODULE_DESCRIPTION("Common USB driver fo
+ MODULE_LICENSE("GPL");
+
+ struct bcma_hcd_device {
++ struct bcma_device *core;
+ struct platform_device *ehci_dev;
+ struct platform_device *ohci_dev;
+ struct gpio_desc *gpio_desc;
+@@ -288,31 +289,16 @@ err_alloc:
+ return ERR_PTR(ret);
+ }
+
+-static int bcma_hcd_probe(struct bcma_device *dev)
++static int bcma_hcd_usb20_init(struct bcma_hcd_device *usb_dev)
+ {
+- int err;
++ struct bcma_device *dev = usb_dev->core;
++ struct bcma_chipinfo *chipinfo = &dev->bus->chipinfo;
+ u32 ohci_addr;
+- struct bcma_hcd_device *usb_dev;
+- struct bcma_chipinfo *chipinfo;
+-
+- chipinfo = &dev->bus->chipinfo;
+-
+- /* TODO: Probably need checks here; is the core connected? */
++ int err;
+
+ if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
+ return -EOPNOTSUPP;
+
+- usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device),
+- GFP_KERNEL);
+- if (!usb_dev)
+- return -ENOMEM;
+-
+- if (dev->dev.of_node)
+- usb_dev->gpio_desc = devm_get_gpiod_from_child(&dev->dev, "vcc",
+- &dev->dev.of_node->fwnode);
+- if (!IS_ERR_OR_NULL(usb_dev->gpio_desc))
+- gpiod_direction_output(usb_dev->gpio_desc, 1);
+-
+ switch (dev->id.id) {
+ case BCMA_CORE_NS_USB20:
+ bcma_hcd_init_chip_arm(dev);
+@@ -345,7 +331,6 @@ static int bcma_hcd_probe(struct bcma_de
+ goto err_unregister_ohci_dev;
+ }
+
+- bcma_set_drvdata(dev, usb_dev);
+ return 0;
+
+ err_unregister_ohci_dev:
+@@ -353,6 +338,40 @@ err_unregister_ohci_dev:
+ return err;
+ }
+
++static int bcma_hcd_probe(struct bcma_device *dev)
++{
++ int err;
++ struct bcma_hcd_device *usb_dev;
++
++ /* TODO: Probably need checks here; is the core connected? */
++
++ usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device),
++ GFP_KERNEL);
++ if (!usb_dev)
++ return -ENOMEM;
++ usb_dev->core = dev;
++
++ if (dev->dev.of_node)
++ usb_dev->gpio_desc = devm_get_gpiod_from_child(&dev->dev, "vcc",
++ &dev->dev.of_node->fwnode);
++ if (!IS_ERR_OR_NULL(usb_dev->gpio_desc))
++ gpiod_direction_output(usb_dev->gpio_desc, 1);
++
++ switch (dev->id.id) {
++ case BCMA_CORE_USB20_HOST:
++ case BCMA_CORE_NS_USB20:
++ err = bcma_hcd_usb20_init(usb_dev);
++ if (err)
++ return err;
++ break;
++ default:
++ return -ENODEV;
++ }
++
++ bcma_set_drvdata(dev, usb_dev);
++ return 0;
++}
++
+ static void bcma_hcd_remove(struct bcma_device *dev)
+ {
+ struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
diff --git a/target/linux/bcm53xx/patches-4.4/197-USB-bcma-add-USB-3.0-support.patch b/target/linux/bcm53xx/patches-4.4/197-USB-bcma-add-USB-3.0-support.patch
new file mode 100644
index 0000000000..34ab858b4d
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/197-USB-bcma-add-USB-3.0-support.patch
@@ -0,0 +1,295 @@
+From 121ec6539abedbc0e975cf35f48ee044b323e4c3 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 16 Jun 2015 17:14:26 +0200
+Subject: [PATCH v3 5/6] usb: bcma: add USB 3.0 support
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ drivers/usb/host/bcma-hcd.c | 225 ++++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 225 insertions(+)
+
+--- a/drivers/usb/host/bcma-hcd.c
++++ b/drivers/usb/host/bcma-hcd.c
+@@ -29,6 +29,7 @@
+ #include <linux/of_gpio.h>
+ #include <linux/usb/ehci_pdriver.h>
+ #include <linux/usb/ohci_pdriver.h>
++#include <linux/usb/xhci_pdriver.h>
+
+ MODULE_AUTHOR("Hauke Mehrtens");
+ MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
+@@ -38,6 +39,7 @@ struct bcma_hcd_device {
+ struct bcma_device *core;
+ struct platform_device *ehci_dev;
+ struct platform_device *ohci_dev;
++ struct platform_device *xhci_dev;
+ struct gpio_desc *gpio_desc;
+ };
+
+@@ -245,6 +247,10 @@ static const struct usb_ehci_pdata ehci_
+ static const struct usb_ohci_pdata ohci_pdata = {
+ };
+
++static const struct usb_xhci_pdata xhci_pdata = {
++ .usb3_fake_doorbell = 1
++};
++
+ static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev,
+ const char *name, u32 addr,
+ const void *data,
+@@ -338,6 +344,216 @@ err_unregister_ohci_dev:
+ return err;
+ }
+
++static bool bcma_wait_reg(struct bcma_bus *bus, void __iomem *addr, u32 mask,
++ u32 value, int timeout)
++{
++ unsigned long deadline = jiffies + timeout;
++ u32 val;
++
++ do {
++ val = readl(addr);
++ if ((val & mask) == value)
++ return true;
++ cpu_relax();
++ udelay(10);
++ } while (!time_after_eq(jiffies, deadline));
++
++ pr_err("Timeout waiting for register %p\n", addr);
++
++ return false;
++}
++
++static void bcma_hcd_usb30_phy_init(struct bcma_hcd_device *bcma_hcd)
++{
++ struct bcma_device *core = bcma_hcd->core;
++ struct bcma_bus *bus = core->bus;
++ struct bcma_chipinfo *chipinfo = &bus->chipinfo;
++ struct bcma_drv_cc_b *ccb = &bus->drv_cc_b;
++ struct bcma_device *arm_core;
++ void __iomem *dmu = NULL;
++ u32 cru_straps_ctrl;
++
++ if (chipinfo->id != BCMA_CHIP_ID_BCM4707 &&
++ chipinfo->id != BCMA_CHIP_ID_BCM53018)
++ return;
++
++ arm_core = bcma_find_core(bus, BCMA_CORE_ARMCA9);
++ if (!arm_core)
++ return;
++
++ dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000);
++ if (!dmu)
++ goto out;
++
++ /* Check strapping of PCIE/USB3 SEL */
++ cru_straps_ctrl = ioread32(dmu + 0x2a0);
++ if ((cru_straps_ctrl & 0x10) == 0)
++ goto out;
++
++ /* Perform USB3 system soft reset */
++ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
++
++ /* Enable MDIO. Setting MDCDIV as 26 */
++ iowrite32(0x0000009a, ccb->mii + 0x000);
++ udelay(2);
++
++ switch (chipinfo->id) {
++ case BCMA_CHIP_ID_BCM4707:
++ if (chipinfo->rev == 4) {
++ /* For NS-B0, USB3 PLL Block */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8000, ccb->mii + 0x004);
++
++ /* Clear ana_pllSeqStart */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58061000, ccb->mii + 0x004);
++
++ /* CMOS Divider ratio to 25 */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582a6400, ccb->mii + 0x004);
++
++ /* Asserting PLL Reset */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582ec000, ccb->mii + 0x004);
++
++ /* Deaaserting PLL Reset */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582e8000, ccb->mii + 0x004);
++
++ /* Deasserting USB3 system reset */
++ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++
++ /* Set ana_pllSeqStart */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58069000, ccb->mii + 0x004);
++
++ /* RXPMD block */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8020, ccb->mii + 0x004);
++
++ /* CDR int loop locking BW to 1 */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58120049, ccb->mii + 0x004);
++
++ /* CDR int loop acquisition BW to 1 */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x580e0049, ccb->mii + 0x004);
++
++ /* CDR prop loop BW to 1 */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x580a005c, ccb->mii + 0x004);
++
++ /* Waiting MII Mgt interface idle */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ } else {
++ /* PLL30 block */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8000, ccb->mii + 0x004);
++
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582a6400, ccb->mii + 0x004);
++
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e80e0, ccb->mii + 0x004);
++
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x580a009c, ccb->mii + 0x004);
++
++ /* Enable SSC */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8040, ccb->mii + 0x004);
++
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x580a21d3, ccb->mii + 0x004);
++
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58061003, ccb->mii + 0x004);
++
++ /* Waiting MII Mgt interface idle */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++
++ /* Deasserting USB3 system reset */
++ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++ }
++ break;
++ case BCMA_CHIP_ID_BCM53018:
++ /* USB3 PLL Block */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8000, ccb->mii + 0x004);
++
++ /* Assert Ana_Pllseq start */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58061000, ccb->mii + 0x004);
++
++ /* Assert CML Divider ratio to 26 */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582a6400, ccb->mii + 0x004);
++
++ /* Asserting PLL Reset */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582ec000, ccb->mii + 0x004);
++
++ /* Deaaserting PLL Reset */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x582e8000, ccb->mii + 0x004);
++
++ /* Waiting MII Mgt interface idle */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++
++ /* Deasserting USB3 system reset */
++ bcma_awrite32(core, BCMA_RESET_CTL, 0);
++
++ /* PLL frequency monitor enable */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58069000, ccb->mii + 0x004);
++
++ /* PIPE Block */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8060, ccb->mii + 0x004);
++
++ /* CMPMAX & CMPMINTH setting */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x580af30d, ccb->mii + 0x004);
++
++ /* DEGLITCH MIN & MAX setting */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x580e6302, ccb->mii + 0x004);
++
++ /* TXPMD block */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x587e8040, ccb->mii + 0x004);
++
++ /* Enabling SSC */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++ iowrite32(0x58061003, ccb->mii + 0x004);
++
++ /* Waiting MII Mgt interface idle */
++ bcma_wait_reg(bus, ccb->mii + 0x000, 0x0100, 0x0000, 1000);
++
++ break;
++ }
++out:
++ if (dmu)
++ iounmap(dmu);
++}
++
++static int bcma_hcd_usb30_init(struct bcma_hcd_device *bcma_hcd)
++{
++ struct bcma_device *core = bcma_hcd->core;
++
++ bcma_core_enable(core, 0);
++
++ bcma_hcd_usb30_phy_init(bcma_hcd);
++
++ bcma_hcd->xhci_dev = bcma_hcd_create_pdev(core, "xhci-hcd", core->addr,
++ &xhci_pdata,
++ sizeof(xhci_pdata));
++ if (IS_ERR(bcma_hcd->ohci_dev))
++ return PTR_ERR(bcma_hcd->ohci_dev);
++
++ return 0;
++}
++
+ static int bcma_hcd_probe(struct bcma_device *dev)
+ {
+ int err;
+@@ -364,6 +580,11 @@ static int bcma_hcd_probe(struct bcma_de
+ if (err)
+ return err;
+ break;
++ case BCMA_CORE_NS_USB30:
++ err = bcma_hcd_usb30_init(usb_dev);
++ if (err)
++ return err;
++ break;
+ default:
+ return -ENODEV;
+ }
+@@ -377,11 +598,14 @@ static void bcma_hcd_remove(struct bcma_
+ struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
+ struct platform_device *ohci_dev = usb_dev->ohci_dev;
+ struct platform_device *ehci_dev = usb_dev->ehci_dev;
++ struct platform_device *xhci_dev = usb_dev->xhci_dev;
+
+ if (ohci_dev)
+ platform_device_unregister(ohci_dev);
+ if (ehci_dev)
+ platform_device_unregister(ehci_dev);
++ if (xhci_dev)
++ platform_device_unregister(xhci_dev);
+
+ bcma_core_disable(dev, 0);
+ }
+@@ -418,6 +642,7 @@ static int bcma_hcd_resume(struct bcma_d
+ static const struct bcma_device_id bcma_hcd_table[] = {
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
++ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB30, BCMA_ANY_REV, BCMA_ANY_CLASS),
+ {},
+ };
+ MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
diff --git a/target/linux/bcm53xx/patches-4.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch b/target/linux/bcm53xx/patches-4.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch
new file mode 100644
index 0000000000..62bda2e830
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-for-decompression.patch
@@ -0,0 +1,86 @@
+From: Florian Fainelli <f.fainelli@gmail.com>
+Subject: [PATCH] ARM: BCM5301x: Disable MMU and Dcache during decompression
+Date: Tue, 14 Jul 2015 16:12:08 -0700
+
+Use the existing __armv7_mmu_cache_flush() to perform the cache flush
+since this does what we are after.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+---
+ arch/arm/boot/compressed/Makefile | 4 +++
+ arch/arm/boot/compressed/head-bcm_5301x-mpcore.S | 37 ++++++++++++++++++++++++
+ arch/arm/boot/compressed/head.S | 2 ++
+ 3 files changed, 43 insertions(+)
+ create mode 100644 arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
+
+--- a/arch/arm/boot/compressed/Makefile
++++ b/arch/arm/boot/compressed/Makefile
+@@ -31,6 +31,10 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
+ OBJS += ll_char_wr.o font.o
+ endif
+
++ifeq ($(CONFIG_ARCH_BCM_5301X),y)
++OBJS += head-bcm_5301x-mpcore.o
++endif
++
+ ifeq ($(CONFIG_ARCH_SA1100),y)
+ OBJS += head-sa1100.o
+ endif
+--- /dev/null
++++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
+@@ -0,0 +1,37 @@
++/*
++ *
++ * Platform specific tweaks. This is merged into head.S by the linker.
++ *
++ */
++
++#include <linux/linkage.h>
++#include <asm/assembler.h>
++#include <asm/cp15.h>
++
++ .section ".start", "ax"
++
++/*
++ * This code section is spliced into the head code by the linker
++ */
++
++__plat_uncompress_start:
++
++ @ Preserve r8/r7 i.e. kernel entry values
++ mov r12, r8
++
++ @ Clear MMU enable and Dcache enable bits
++ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
++ bic r0, #CR_C|CR_M
++ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR
++ nop
++
++ @ Call the cache invalidation routine
++ bl __armv7_mmu_cache_flush_fn
++ nop
++ mov r0,#0
++ ldr r3, =0x19022000 @ L2 cache controller, control reg
++ str r0, [r3, #0x100] @ Disable L2 cache
++ nop
++
++ @ Restore
++ mov r8, r12
+--- a/arch/arm/boot/compressed/head.S
++++ b/arch/arm/boot/compressed/head.S
+@@ -1152,6 +1152,7 @@ __armv7_mmu_cache_flush:
+ hierarchical:
+ mcr p15, 0, r10, c7, c10, 5 @ DMB
+ stmfd sp!, {r0-r7, r9-r11}
++ENTRY(__armv7_mmu_cache_flush_fn)
+ mrc p15, 1, r0, c0, c0, 1 @ read clidr
+ ands r3, r0, #0x7000000 @ extract loc from clidr
+ mov r3, r3, lsr #23 @ left align loc bit field
+@@ -1201,6 +1202,7 @@ iflush:
+ mcr p15, 0, r10, c7, c10, 4 @ DSB
+ mcr p15, 0, r10, c7, c5, 4 @ ISB
+ mov pc, lr
++ENDPROC(__armv7_mmu_cache_flush_fn)
+
+ __armv5tej_mmu_cache_flush:
+ tst r4, #1
diff --git a/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-SPROM.patch b/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-SPROM.patch
new file mode 100644
index 0000000000..ed6cc73bcc
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-SPROM.patch
@@ -0,0 +1,26 @@
+From d404e0b22356078a51719fa911f6e09cb1a72d80 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sun, 7 Jun 2015 16:18:18 +0200
+Subject: [PATCH] ARM: BCM5301X: Add SPROM
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -136,6 +136,10 @@
+ };
+ };
+
++ sprom0: sprom@0 {
++ compatible = "brcm,bcm47xx-sprom";
++ };
++
+ axi@18000000 {
+ compatible = "brcm,bus-axi";
+ reg = <0x18000000 0x1000>;
diff --git a/target/linux/bcm53xx/patches-4.4/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch b/target/linux/bcm53xx/patches-4.4/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch
new file mode 100644
index 0000000000..ff02cd7566
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/305-ARM-BCM5301X-Add-DT-for-Linksys-EA6300-V1.patch
@@ -0,0 +1,69 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Subject: [PATCH] ARM: BCM5301X: Add DT for Linksys EA6300 V1
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4708-asus-rt-ac56u.dtb \
+ bcm4708-asus-rt-ac68u.dtb \
+ bcm4708-buffalo-wzr-1750dhp.dtb \
++ bcm4708-linksys-ea6300-v1.dtb \
+ bcm4708-luxul-xwc-1000.dtb \
+ bcm4708-netgear-r6250.dtb \
+ bcm4708-netgear-r6300-v2.dtb \
+--- /dev/null
++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+@@ -0,0 +1,48 @@
++/*
++ * Broadcom BCM470X / BCM5301X ARM platform code.
++ * DTS for Linksys EA6300 V1
++ *
++ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
++ *
++ * Licensed under the GNU/GPL. See COPYING for details.
++ */
++
++/dts-v1/;
++
++#include "bcm4708.dtsi"
++#include "bcm5301x-nand-cs0-bch8.dtsi"
++
++/ {
++ compatible = "linksys,ea6300v1", "brcm,bcm4708";
++ model = "Linksys EA6300 V1";
++
++ chosen {
++ bootargs = "console=ttyS0,115200";
++ };
++
++ memory {
++ reg = <0x00000000 0x08000000>;
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ wps {
++ label = "WPS";
++ linux,code = <KEY_WPS_BUTTON>;
++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
++ };
++
++ restart {
++ label = "Reset";
++ linux,code = <KEY_RESTART>;
++ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&uart0 {
++ status = "okay";
++};
diff --git a/target/linux/bcm53xx/patches-4.4/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch b/target/linux/bcm53xx/patches-4.4/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch
new file mode 100644
index 0000000000..802188db17
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/320-ARM-BCM5301X-Add-Buffalo-WXR-1900DHP-clock-and-USB-p.patch
@@ -0,0 +1,41 @@
+From 504dba5b073a9009ae1e3f2fc53ea9c3aa10c38a Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@openwrt.org>
+Date: Wed, 13 May 2015 20:56:38 +0200
+Subject: [PATCH] ARM: BCM5301X: Add Buffalo WXR-1900DHP clock and USB power
+ control
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 17 +++++++++++++++++
+ 1 file changed, 17 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -24,6 +24,23 @@
+ reg = <0x00000000 0x08000000>;
+ };
+
++ clocks {
++ clk_periph: periph {
++ clock-frequency = <500000000>;
++ };
++ };
++
++ axi@18000000 {
++ usb2@21000 {
++ reg = <0x00021000 0x1000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
+ leds {
+ compatible = "gpio-leds";
+
diff --git a/target/linux/bcm53xx/patches-4.4/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch b/target/linux/bcm53xx/patches-4.4/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch
new file mode 100644
index 0000000000..e9b1b32819
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/321-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers.patch
@@ -0,0 +1,66 @@
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -24,6 +24,26 @@
+ reg = <0x00000000 0x08000000>;
+ };
+
++ axi@18000000 {
++ usb2@21000 {
++ reg = <0x00021000 0x1000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
++ };
++
++ usb3@23000 {
++ reg = <0x00023000 0x1000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
++ };
++ };
++
+ spi {
+ compatible = "spi-gpio";
+ num-chipselects = <1>;
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -24,6 +24,26 @@
+ reg = <0x00000000 0x08000000>;
+ };
+
++ axi@18000000 {
++ usb2@21000 {
++ reg = <0x00021000 0x1000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
++ };
++
++ usb3@23000 {
++ reg = <0x00023000 0x1000>;
++
++ #address-cells = <1>;
++ #size-cells = <1>;
++
++ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
+ leds {
+ compatible = "gpio-leds";
+
diff --git a/target/linux/bcm53xx/patches-4.4/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch b/target/linux/bcm53xx/patches-4.4/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch
new file mode 100644
index 0000000000..4e25647dbb
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/330-ARM-BCM5310X-Enable-earlyprintk-on-tested-devices.patch
@@ -0,0 +1,170 @@
+From eb1075cc48d3c315c7403822c33da9588ab76492 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Wed, 14 Jan 2015 08:33:25 +0100
+Subject: [PATCH] ARM: BCM5310X: Enable earlyprintk on tested devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 2 +-
+ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +-
+ arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 +-
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 2 +-
+ 4 files changed, 4 insertions(+), 4 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -17,7 +17,7 @@
+ model = "Buffalo WZR-1750DHP (BCM4708)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -17,7 +17,7 @@
+ model = "Netgear R6250 V1 (BCM4708)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+@@ -17,7 +17,7 @@
+ model = "Asus RT-N18U (BCM47081)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+@@ -17,7 +17,7 @@
+ model = "Buffalo WZR-600DHP2 (BCM47081)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -17,7 +17,7 @@
+ model = "Buffalo WZR-900DHP (BCM47081)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -17,7 +17,7 @@
+ model = "Netgear R8000 (BCM4709)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+@@ -17,7 +17,7 @@
+ model = "Asus RT-AC56U (BCM4708)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+@@ -17,7 +17,7 @@
+ model = "Asus RT-AC68U (BCM4708)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+@@ -17,7 +17,7 @@
+ model = "Luxul XWC-1000 (BCM4708)";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -17,7 +17,7 @@
+ model = "Buffalo WXR-1900DHP";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -17,7 +17,7 @@
+ model = "SmartRG SR400ac";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -17,7 +17,7 @@
+ model = "Asus RT-AC87U";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+@@ -17,7 +17,7 @@
+ model = "Netgear R7000";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
+--- a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
++++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
+@@ -17,7 +17,7 @@
+ model = "Linksys EA6300 V1";
+
+ chosen {
+- bootargs = "console=ttyS0,115200";
++ bootargs = "console=ttyS0,115200 earlyprintk";
+ };
+
+ memory {
diff --git a/target/linux/bcm53xx/patches-4.4/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch b/target/linux/bcm53xx/patches-4.4/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
new file mode 100644
index 0000000000..b53c57f7d5
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/331-ARM-BCM5301X-Specify-RAM-on-devices-by-including-HIG.patch
@@ -0,0 +1,173 @@
+From 36b2fbb3badf0e32b371e1f7579a95d4fe25c0e1 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Wed, 14 Jan 2015 09:13:58 +0100
+Subject: [PATCH] ARM: BCM5301X: Specify RAM on devices by including HIGHMEM
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 3 ++-
+ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 ++-
+ arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 ++-
+ arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 3 ++-
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 3 ++-
+ 5 files changed, 10 insertions(+), 5 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x18000000>;
+ };
+
+ axi@18000000 {
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ axi@18000000 {
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
+--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ spi {
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ gpio-keys {
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ axi@18000000 {
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x18000000>;
+ };
+
+ clocks {
+--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
+--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+@@ -21,7 +21,8 @@
+ };
+
+ memory {
+- reg = <0x00000000 0x08000000>;
++ reg = <0x00000000 0x08000000
++ 0x88000000 0x08000000>;
+ };
+
+ leds {
diff --git a/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
new file mode 100644
index 0000000000..f9ca7eb7c1
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
@@ -0,0 +1,20 @@
+From: Felix Fietkau <nbd@openwrt.org>
+Subject: [PATCH] ARM: BCM5301X: Add power button for Buffalo WZR-1750DHP
+
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+---
+--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+@@ -123,6 +123,12 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
++ power {
++ label = "Power";
++ linux,code = <KEY_POWER>;
++ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
++ };
++
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
diff --git a/target/linux/bcm53xx/patches-4.4/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch b/target/linux/bcm53xx/patches-4.4/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch
new file mode 100644
index 0000000000..dad4f8a824
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/351-ARM-BCM5301X-Enable-ChipCommon-UART-on-untested-devi.patch
@@ -0,0 +1,111 @@
+From b49d7bb4825654f81bcee8e219028712811515a5 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Mon, 29 Jun 2015 08:11:36 +0200
+Subject: [PATCH] ARM: BCM5301X: Enable ChipCommon UART on untested devices
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 4 ++++
+ arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 4 ++++
+ arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++++
+ arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 4 ++++
+ arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 ++++
+ arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 5 +++++
+ arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 5 +++++
+ arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 5 +++++
+ 8 files changed, 35 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+@@ -96,3 +96,7 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+@@ -83,3 +83,7 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+@@ -83,3 +83,7 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+@@ -77,3 +77,7 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+@@ -37,3 +37,7 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++};
+--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+@@ -65,3 +65,8 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++ clock-frequency = <125000000>;
++};
+--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+@@ -144,3 +144,8 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++ clock-frequency = <125000000>;
++};
+--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+@@ -127,3 +127,8 @@
+ };
+ };
+ };
++
++&uart0 {
++ status = "okay";
++ clock-frequency = <125000000>;
++};
+--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
+@@ -104,4 +104,5 @@
+
+ &uart0 {
+ status = "okay";
++ clock-frequency = <125000000>;
+ };
diff --git a/target/linux/bcm53xx/patches-4.4/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch b/target/linux/bcm53xx/patches-4.4/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch
new file mode 100644
index 0000000000..ccdb28b54d
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/400-mtd-bcm47xxpart-scan-whole-flash-on-ARCH_BCM_5301X.patch
@@ -0,0 +1,31 @@
+From d658c21d6697293a928434fd6ac19264b5a8948d Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Fri, 30 Jan 2015 08:25:54 +0100
+Subject: [PATCH] mtd: bcm47xxpart: scan whole flash on ARCH_BCM_5301X
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/mtd/bcm47xxpart.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -120,9 +120,15 @@ static int bcm47xxpart_parse(struct mtd_
+ /* Parse block by block looking for magics */
+ for (offset = 0; offset <= master->size - blocksize;
+ offset += blocksize) {
++#ifndef CONFIG_ARCH_BCM_5301X
++ /*
++ * ARM routers may have partitions in higher memory. E.g.
++ * Netgear R8000 has board_data at 0x2600000.
++ */
+ /* Nothing more in higher memory */
+ if (offset >= 0x2000000)
+ break;
++#endif
+
+ if (curr_part >= BCM47XXPART_MAX_PARTS) {
+ pr_warn("Reached maximum number of partitions, scanning stopped!\n");
diff --git a/target/linux/bcm53xx/patches-4.4/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch b/target/linux/bcm53xx/patches-4.4/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch
new file mode 100644
index 0000000000..487e64fd5b
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/404-mtd-bcm53xxspiflash-new-driver-for-SPI-flahes-on-Bro.patch
@@ -0,0 +1,20 @@
+--- a/drivers/mtd/spi-nor/Kconfig
++++ b/drivers/mtd/spi-nor/Kconfig
+@@ -41,4 +41,10 @@ config SPI_NXP_SPIFI
+ Flash. Enable this option if you have a device with a SPIFI
+ controller and want to access the Flash as a mtd device.
+
++config MTD_SPI_BCM53XXSPIFLASH
++ tristate "SPI-NOR flashes connected to the Broadcom ARM SoC"
++ depends on MTD_SPI_NOR
++ help
++ SPI driver for flashes used on Broadcom ARM SoCs.
++
+ endif # MTD_SPI_NOR
+--- a/drivers/mtd/spi-nor/Makefile
++++ b/drivers/mtd/spi-nor/Makefile
+@@ -1,3 +1,4 @@
+ obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
+ obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o
++obj-$(CONFIG_MTD_SPI_BCM53XXSPIFLASH) += bcm53xxspiflash.o
+ obj-$(CONFIG_SPI_NXP_SPIFI) += nxp-spifi.o
diff --git a/target/linux/bcm53xx/patches-4.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-4.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
new file mode 100644
index 0000000000..11bd956163
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
@@ -0,0 +1,59 @@
+From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Thu, 16 Oct 2014 20:52:16 +0200
+Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/mtd/ubi/attach.c | 5 +++++
+ drivers/mtd/ubi/io.c | 4 ++++
+ drivers/mtd/ubi/ubi.h | 1 +
+ 3 files changed, 10 insertions(+)
+
+--- a/drivers/mtd/ubi/attach.c
++++ b/drivers/mtd/ubi/attach.c
+@@ -95,6 +95,9 @@ static int self_check_ai(struct ubi_devi
+ static struct ubi_ec_hdr *ech;
+ static struct ubi_vid_hdr *vidh;
+
++/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */
++bool erase_all_next;
++
+ /**
+ * add_to_list - add physical eraseblock to a list.
+ * @ai: attaching information
+@@ -1425,6 +1428,8 @@ int ubi_attach(struct ubi_device *ubi, i
+ if (!ai)
+ return -ENOMEM;
+
++ erase_all_next = false;
++
+ #ifdef CONFIG_MTD_UBI_FASTMAP
+ /* On small flash devices we disable fastmap in any case. */
+ if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
+--- a/drivers/mtd/ubi/io.c
++++ b/drivers/mtd/ubi/io.c
+@@ -755,6 +755,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
+ }
+
+ magic = be32_to_cpu(ec_hdr->magic);
++ if (magic == 0xdeadc0de)
++ erase_all_next = true;
++ if (erase_all_next)
++ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
+ if (magic != UBI_EC_HDR_MAGIC) {
+ if (mtd_is_eccerr(read_err))
+ return UBI_IO_BAD_HDR_EBADMSG;
+--- a/drivers/mtd/ubi/ubi.h
++++ b/drivers/mtd/ubi/ubi.h
+@@ -781,6 +781,7 @@ extern struct mutex ubi_devices_mutex;
+ extern struct blocking_notifier_head ubi_notifiers;
+
+ /* attach.c */
++extern bool erase_all_next;
+ int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
+ int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips);
+ struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai,
diff --git a/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch b/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
new file mode 100644
index 0000000000..dfc422ee3e
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
@@ -0,0 +1,42 @@
+From 4abdde3ad6bc0b3b157c4bf6ec0bf139d11d07e8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Wed, 13 May 2015 14:13:28 +0200
+Subject: [PATCH] b53: add hacky CPU port fixes for devices not using port 5
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/net/phy/b53/b53_common.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/net/phy/b53/b53_common.c
++++ b/drivers/net/phy/b53/b53_common.c
+@@ -25,6 +25,7 @@
+ #include <linux/module.h>
+ #include <linux/switch.h>
+ #include <linux/platform_data/b53.h>
++#include <linux/of.h>
+
+ #include "b53_regs.h"
+ #include "b53_priv.h"
+@@ -1313,6 +1314,18 @@ static int b53_switch_init(struct b53_de
+ sw_dev->cpu_port = 5;
+ }
+
++ if (of_machine_is_compatible("asus,rt-ac87u"))
++ sw_dev->cpu_port = 7;
++ else if (of_machine_is_compatible("netgear,r8000"))
++ sw_dev->cpu_port = 8;
++
++ /*
++ * Workaround for devices using port 8 (connected to the 3rd iface).
++ * For some reason it doesn't work (no packets on eth2).
++ */
++ if (of_machine_is_compatible("netgear,r8000"))
++ sw_dev->cpu_port = 5;
++
+ /* cpu port is always last */
+ sw_dev->ports = sw_dev->cpu_port + 1;
+ dev->enabled_ports |= BIT(sw_dev->cpu_port);
diff --git a/target/linux/bcm53xx/patches-4.4/800-bcma-use-two-different-initcalls-if-built-in.patch b/target/linux/bcm53xx/patches-4.4/800-bcma-use-two-different-initcalls-if-built-in.patch
new file mode 100644
index 0000000000..eb9ab2fe8a
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/800-bcma-use-two-different-initcalls-if-built-in.patch
@@ -0,0 +1,65 @@
+From 666bdfc027cde41a171862dc698987a378c8b66a Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Mon, 9 Feb 2015 18:00:42 +0100
+Subject: [PATCH RFC] bcma: use two different initcalls if built-in
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This is needed as we can't initialize bus during fs_initcall.
+Initialization requires SPROM which depends on NVRAM which depends on
+mtd. Since mtd, spi, nand, spi-nor use standard module_init, we have to
+do the same in bcma.
+Without this we'll try to initialize SPROM without having a ready SPROM
+proviver registered using bcma_arch_register_fallback_sprom.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+While this patch seems to work and I can compile bcma as built-in and
+module, I'm not too proud of it. I don't really like these #if(n)def
+tricks and I'm afraid bcma_modinit may be called even if
+bcma_modinit_early failed.
+
+Do you see any better idea of solving this?
+---
+ drivers/bcma/main.c | 16 ++++++++++++++--
+ 1 file changed, 14 insertions(+), 2 deletions(-)
+
+--- a/drivers/bcma/main.c
++++ b/drivers/bcma/main.c
+@@ -668,13 +668,25 @@ static int bcma_device_uevent(struct dev
+ core->id.rev, core->id.class);
+ }
+
++/* Bus has to be registered early, before any bcma driver */
++static int __init bcma_modinit_early(void)
++{
++ return bus_register(&bcma_bus_type);
++}
++#ifndef MODULE
++fs_initcall(bcma_modinit_early);
++#endif
++
++/* Initialization has to be done later with SPI/mtd/NAND/SPROM available */
+ static int __init bcma_modinit(void)
+ {
+ int err;
+
+- err = bus_register(&bcma_bus_type);
++#ifdef MODULE
++ err = bcma_modinit_early();
+ if (err)
+ return err;
++#endif
+
+ err = bcma_host_soc_register_driver();
+ if (err) {
+@@ -691,7 +703,7 @@ static int __init bcma_modinit(void)
+
+ return err;
+ }
+-fs_initcall(bcma_modinit);
++module_init(bcma_modinit);
+
+ static void __exit bcma_modexit(void)
+ {
diff --git a/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch b/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch
new file mode 100644
index 0000000000..c1dfa92013
--- /dev/null
+++ b/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-workaround-for-Asus-RT-AC87U-asus-pa.patch
@@ -0,0 +1,42 @@
+From 21500872c1dba33848ddcf6bea97d58772675d36 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sun, 17 May 2015 14:00:52 +0200
+Subject: [PATCH] mtd: bcm47xxpart: workaround for Asus RT-AC87U "asus"
+ partition
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+ drivers/mtd/bcm47xxpart.c | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/drivers/mtd/bcm47xxpart.c
++++ b/drivers/mtd/bcm47xxpart.c
+@@ -14,6 +14,7 @@
+ #include <linux/slab.h>
+ #include <linux/mtd/mtd.h>
+ #include <linux/mtd/partitions.h>
++#include <linux/of.h>
+
+ #include <uapi/linux/magic.h>
+
+@@ -135,6 +136,17 @@ static int bcm47xxpart_parse(struct mtd_
+ break;
+ }
+
++ /*
++ * Ugly workaround for Asus RT-AC87U and its "asus" partition.
++ * It uses JFFS2 which we don't (want to) detect. We should
++ * probably use DT to define partitions but we need a working
++ * TRX firmware splitter first.
++ */
++ if (of_machine_is_compatible("asus,rt-ac87u") && offset == 0x7ec0000) {
++ bcm47xxpart_add_part(&parts[curr_part++], "asus", offset, MTD_WRITEABLE);
++ continue;
++ }
++
+ /* Read beginning of the block */
+ if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
+ &bytes_read, (uint8_t *)buf) < 0) {