aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds5
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/ki_rb.dts206
-rw-r--r--target/linux/ramips/image/mt76x8.mk12
6 files changed, 228 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index b424c759db..73f52339c5 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -555,6 +555,11 @@ zorlik,zl5900v2)
zte-q7)
set_wifi_led "$boardname:blue:status"
;;
+zyxel,keenetic-extra-ii)
+ set_wifi_led "$boardname:green:wifi"
+ set_usb_led "$boardname:green:usb"
+ ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01"
+ ;;
youku-yk1)
set_wifi_led "$boardname:blue:air"
set_usb_led "$boardname:blue:usb"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 1303bcf8ca..01355b4278 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -218,7 +218,8 @@ ramips_setup_interfaces()
wrtnode2p | \
wrtnode2r | \
youhua,wr1200js|\
- zbt-wa05)
+ zbt-wa05|\
+ zyxel,keenetic-extra-ii)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
;;
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index ed6c409e0f..d4fe14116a 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -54,7 +54,8 @@ get_status_led() {
x5|\
x8|\
xdxrn502j|\
- wn3000rpv3)
+ wn3000rpv3|\
+ zyxel,keenetic-extra-ii)
status_led="$boardname:green:power"
;;
3g-6200nl)
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 3511f828ce..a2c6395cfb 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -226,6 +226,7 @@ platform_check_image() {
zbt-wr8305rt|\
zorlik,zl5900v2|\
zte-q7|\
+ zyxel,keenetic-extra-ii|\
youku-yk1)
[ "$magic" != "27051956" ] && {
echo "Invalid image type."
diff --git a/target/linux/ramips/dts/ki_rb.dts b/target/linux/ramips/dts/ki_rb.dts
new file mode 100644
index 0000000000..8b27063a46
--- /dev/null
+++ b/target/linux/ramips/dts/ki_rb.dts
@@ -0,0 +1,206 @@
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "zyxel,keenetic-extra-ii", "mediatek,mt7628an-soc";
+ model = "ZyXEL Keenetic Extra II";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600n8";
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ fn {
+ label = "fn";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "keenetic-extra-ii:green:power";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ internet {
+ label = "keenetic-extra-ii:green:internet";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi {
+ label = "keenetic-extra-ii:green:wifi";
+ gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "keenetic-extra-ii:green:usb";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usbpower {
+ gpio-export,name = "usbpower";
+ gpio-export,output = <1>;
+ gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ m25p,chunked-io = <32>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "rf-eeprom";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0xe90000>;
+ };
+
+ partition@ee0000 {
+ label = "config_1";
+ reg = <0xee0000 0x10000>;
+ read-only;
+ };
+
+ partition@ef0000 {
+ label = "storage";
+ reg = <0xef0000 0x100000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "dump";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+
+ partition@1000000 {
+ label = "u-state";
+ reg = <0x1000000 0x30000>;
+ read-only;
+ };
+
+ partition@1030000 {
+ label = "u-config_res";
+ reg = <0x1030000 0x10000>;
+ read-only;
+ };
+
+ partition@1040000 {
+ label = "rf-eeprom_res";
+ reg = <0x1040000 0x10000>;
+ read-only;
+ };
+
+ partition@1050000 {
+ label = "firmware_2";
+ reg = <0x1050000 0xe90000>;
+ read-only;
+ };
+
+ partition@1ee0000 {
+ label = "config_2";
+ reg = <0x1ee0000 0x10000>;
+ read-only;
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x4>;
+ mediatek,portmap = "wllll";
+};
+
+&wmac {
+ status = "okay";
+ mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&factory 0x8004>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "gpio", "i2s", "refclk", "spi cs1", "uart1", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index 443e1c79ab..6c75002a84 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -313,3 +313,15 @@ define Device/zbtlink_zbt-we1226
DEVICE_TITLE := ZBTlink ZBT-WE1226
endef
TARGET_DEVICES += zbtlink_zbt-we1226
+
+define Device/zyxel_keenetic-extra-ii
+ DTS := ki_rb
+ IMAGE_SIZE := 14912k
+ BLOCKSIZE := 64k
+ DEVICE_TITLE := ZyXEL Keenetic Extra II
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+ IMAGES += factory.bin
+ IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to $$$$(BLOCKSIZE) | \
+ check-size $$$$(IMAGE_SIZE) | zyimage -d 6162 -v "ZyXEL Keenetic Extra II"
+endef
+TARGET_DEVICES += zyxel_keenetic-extra-ii